aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/libata-core.c5
-rw-r--r--drivers/ata/libata-scsi.c19
-rw-r--r--drivers/ata/libata.h1
-rw-r--r--drivers/ata/sata_svw.c77
4 files changed, 82 insertions, 20 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fbc24358ada..4fbcce758b0 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -113,7 +113,7 @@ int atapi_enabled = 1;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
-int atapi_dmadir = 0;
+static int atapi_dmadir = 0;
module_param(atapi_dmadir, int, 0444);
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
@@ -6567,6 +6567,8 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
ata_lpm_enable(host);
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
+ if (rc == 0)
+ host->dev->power.power_state = mesg;
return rc;
}
@@ -6585,6 +6587,7 @@ void ata_host_resume(struct ata_host *host)
{
ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
+ host->dev->power.power_state = PMSG_ON;
/* reenable link pm */
ata_lpm_disable(host);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0562b0a49f3..8f0e8f2bc62 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -862,9 +862,10 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
struct request_queue *q = sdev->request_queue;
void *buf;
- /* set the min alignment */
+ /* set the min alignment and padding */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
+ blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1);
/* configure draining */
buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
@@ -1694,12 +1695,17 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
u8 *rbuf;
unsigned int buflen, rc;
struct scsi_cmnd *cmd = args->cmd;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &rbuf);
memset(rbuf, 0, buflen);
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
+ local_irq_restore(flags);
+
if (rc == 0)
cmd->result = SAM_STAT_GOOD;
args->done(cmd);
@@ -2473,6 +2479,9 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
u8 *buf = NULL;
unsigned int buflen;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &buf);
@@ -2490,6 +2499,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
}
ata_scsi_rbuf_put(cmd, buf);
+
+ local_irq_restore(flags);
}
cmd->result = SAM_STAT_GOOD;
@@ -2528,7 +2539,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
}
qc->tf.command = ATA_CMD_PACKET;
- qc->nbytes = scsi_bufflen(scmd);
+ qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
/* check whether ATAPI DMA is safe */
if (!using_pio && ata_check_atapi_dma(qc))
@@ -2539,7 +2550,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(scmd->request->raw_data_len, (unsigned int)63 * 1024);
+ nbytes = min(scmd->request->data_len, (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
@@ -2865,7 +2876,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nbytes = scsi_bufflen(scmd);
+ qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
/* request result TF and be quiet about device error */
qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6036dedfe37..aa884f71a12 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -56,7 +56,6 @@ enum {
extern unsigned int ata_print_id;
extern struct workqueue_struct *ata_aux_wq;
extern int atapi_enabled;
-extern int atapi_dmadir;
extern int atapi_passthru16;
extern int libata_fua;
extern int libata_noacpi;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 69f651e0bc9..840d1c4a785 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -45,6 +45,8 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi.h>
#include <linux/libata.h>
#ifdef CONFIG_PPC_OF
@@ -59,6 +61,7 @@ enum {
/* ap->flags bits */
K2_FLAG_SATA_8_PORTS = (1 << 24),
K2_FLAG_NO_ATAPI_DMA = (1 << 25),
+ K2_FLAG_BAR_POS_3 = (1 << 26),
/* Taskfile registers offsets */
K2_SATA_TF_CMD_OFFSET = 0x00,
@@ -88,8 +91,10 @@ enum {
/* Port stride */
K2_SATA_PORT_OFFSET = 0x100,
- board_svw4 = 0,
- board_svw8 = 1,
+ chip_svw4 = 0,
+ chip_svw8 = 1,
+ chip_svw42 = 2, /* bar 3 */
+ chip_svw43 = 3, /* bar 5 */
};
static u8 k2_stat_check_status(struct ata_port *ap);
@@ -97,10 +102,25 @@ static u8 k2_stat_check_status(struct ata_port *ap);
static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc)
{
+ u8 cmnd = qc->scsicmd->cmnd[0];
+
if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA)
return -1; /* ATAPI DMA not supported */
+ else {
+ switch (cmnd) {
+ case READ_10:
+ case READ_12:
+ case READ_16:
+ case WRITE_10:
+ case WRITE_12:
+ case WRITE_16:
+ return 0;
+
+ default:
+ return -1;
+ }
- return 0;
+ }
}
static int k2_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@@ -354,7 +374,7 @@ static const struct ata_port_operations k2_sata_ops = {
};
static const struct ata_port_info k2_port_info[] = {
- /* board_svw4 */
+ /* chip_svw4 */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA,
@@ -363,7 +383,7 @@ static const struct ata_port_info k2_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &k2_sata_ops,
},
- /* board_svw8 */
+ /* chip_svw8 */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA |
@@ -373,6 +393,24 @@ static const struct ata_port_info k2_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &k2_sata_ops,
},
+ /* chip_svw42 */
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &k2_sata_ops,
+ },
+ /* chip_svw43 */
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &k2_sata_ops,
+ },
};
static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
@@ -402,7 +440,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
{ &k2_port_info[ent->driver_data], NULL };
struct ata_host *host;
void __iomem *mmio_base;
- int n_ports, i, rc;
+ int n_ports, i, rc, bar_pos;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -416,6 +454,9 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
if (!host)
return -ENOMEM;
+ bar_pos = 5;
+ if (ppi[0]->flags & K2_FLAG_BAR_POS_3)
+ bar_pos = 3;
/*
* If this driver happens to only be useful on Apple's K2, then
* we should check that here as it has a normal Serverworks ID
@@ -428,17 +469,23 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
* Check if we have resources mapped at all (second function may
* have been disabled by firmware)
*/
- if (pci_resource_len(pdev, 5) == 0)
+ if (pci_resource_len(pdev, bar_pos) == 0) {
+ /* In IDE mode we need to pin the device to ensure that
+ pcim_release does not clear the busmaster bit in config
+ space, clearing causes busmaster DMA to fail on
+ ports 3 & 4 */
+ pcim_pin_device(pdev);
return -ENODEV;
+ }
/* Request and iomap PCI regions */
- rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+ rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
- mmio_base = host->iomap[5];
+ mmio_base = host->iomap[bar_pos];
/* different controllers have different number of ports - currently 4 or 8 */
/* All ports are on the same function. Multi-function device is no
@@ -483,11 +530,13 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
* controller
* */
static const struct pci_device_id k2_sata_pci_tbl[] = {
- { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 },
- { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 },
{ }
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 20:37:31 +0000