diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/sata_inic162x.c | 103 |
1 files changed, 5 insertions, 98 deletions
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index db57f34d221..3ca0ee93bc1 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -101,9 +101,7 @@ enum { PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, - - PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA, - PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE, + PIRQ_MASK_DEFAULT = PIRQ_REPLY, PIRQ_MASK_FREEZE = 0xff, /* PORT_PRD_CTL bits */ @@ -206,13 +204,11 @@ struct inic_port_priv { dma_addr_t pkt_dma; u32 *cpb_tbl; dma_addr_t cpb_tbl_dma; - u8 dfl_prdctl; - u8 cached_prdctl; - u8 cached_pirq_mask; }; static struct scsi_host_template inic_sht = { - ATA_BMDMA_SHT(DRV_NAME), + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */ .dma_boundary = INIC_DMA_BOUNDARY, }; @@ -227,23 +223,6 @@ static void __iomem *inic_port_base(struct ata_port *ap) return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE; } -static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask) -{ - void __iomem *port_base = inic_port_base(ap); - struct inic_port_priv *pp = ap->private_data; - - writeb(mask, port_base + PORT_IRQ_MASK); - pp->cached_pirq_mask = mask; -} - -static void inic_set_pirq_mask(struct ata_port *ap, u8 mask) -{ - struct inic_port_priv *pp = ap->private_data; - - if (pp->cached_pirq_mask != mask) - __inic_set_pirq_mask(ap, mask); -} - static void inic_reset_port(void __iomem *port_base) { void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; @@ -297,63 +276,6 @@ static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) return 0; } -/* - * In TF mode, inic162x is very similar to SFF device. TF registers - * function the same. DMA engine behaves similary using the same PRD - * format as BMDMA but different command register, interrupt and event - * notification methods are used. The following inic_bmdma_*() - * functions do the impedance matching. - */ -static void inic_bmdma_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct inic_port_priv *pp = ap->private_data; - void __iomem *port_base = inic_port_base(ap); - int rw = qc->tf.flags & ATA_TFLAG_WRITE; - - /* make sure device sees PRD table writes */ - wmb(); - - /* load transfer length */ - writel(qc->nbytes, port_base + PORT_PRD_XFERLEN); - - /* turn on DMA and specify data direction */ - pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN; - if (!rw) - pp->cached_prdctl |= PRD_CTL_WR; - writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); -} - -static void inic_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct inic_port_priv *pp = ap->private_data; - void __iomem *port_base = inic_port_base(ap); - - /* start host DMA transaction */ - pp->cached_prdctl |= PRD_CTL_START; - writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); -} - -static void inic_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct inic_port_priv *pp = ap->private_data; - void __iomem *port_base = inic_port_base(ap); - - /* stop DMA engine */ - writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); -} - -static u8 inic_bmdma_status(struct ata_port *ap) -{ - /* event is already verified by the interrupt handler */ - return ATA_DMA_INTR; -} - static void inic_stop_idma(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); @@ -631,8 +553,7 @@ static void inic_freeze(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); - __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE); - + writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK); ap->ops->sff_check_status(ap); writeb(0xff, port_base + PORT_IRQ_STAT); } @@ -643,8 +564,7 @@ static void inic_thaw(struct ata_port *ap) ap->ops->sff_check_status(ap); writeb(0xff, port_base + PORT_IRQ_STAT); - - __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER); + writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK); } static int inic_check_ready(struct ata_link *link) @@ -707,7 +627,6 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, static void inic_error_handler(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); - struct inic_port_priv *pp = ap->private_data; unsigned long flags; /* reset PIO HSM and stop DMA engine */ @@ -715,7 +634,6 @@ static void inic_error_handler(struct ata_port *ap) spin_lock_irqsave(ap->lock, flags); ap->hsm_task_state = HSM_ST_IDLE; - writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); spin_unlock_irqrestore(ap->lock, flags); /* PIO and DMA engines have been stopped, perform recovery */ @@ -765,10 +683,8 @@ static int inic_port_resume(struct ata_port *ap) static int inic_port_start(struct ata_port *ap) { - void __iomem *port_base = inic_port_base(ap); struct device *dev = ap->host->dev; struct inic_port_priv *pp; - u8 tmp; int rc; /* alloc and initialize private data */ @@ -777,11 +693,6 @@ static int inic_port_start(struct ata_port *ap) return -ENOMEM; ap->private_data = pp; - /* default PRD_CTL value, DMAEN, WR and START off */ - tmp = readb(port_base + PORT_PRD_CTL); - tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START); - pp->dfl_prdctl = tmp; - /* Alloc resources */ rc = ata_port_start(ap); if (rc) @@ -805,10 +716,6 @@ static int inic_port_start(struct ata_port *ap) static struct ata_port_operations inic_port_ops = { .inherits = &ata_sff_port_ops, - .bmdma_setup = inic_bmdma_setup, - .bmdma_start = inic_bmdma_start, - .bmdma_stop = inic_bmdma_stop, - .bmdma_status = inic_bmdma_status, .qc_prep = inic_qc_prep, .qc_issue = inic_qc_issue, .qc_fill_rtf = inic_qc_fill_rtf, |