diff options
Diffstat (limited to 'drivers/block')
| -rw-r--r-- | drivers/block/Kconfig | 44 | ||||
| -rw-r--r-- | drivers/block/Makefile | 1 | ||||
| -rw-r--r-- | drivers/block/acsi.c | 1825 | ||||
| -rw-r--r-- | drivers/block/amiflop.c | 2 | ||||
| -rw-r--r-- | drivers/block/cciss.c | 2 | ||||
| -rw-r--r-- | drivers/block/nbd.c | 2 |
6 files changed, 11 insertions, 1865 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index b4c8319138b..6e23af1ecbd 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -2,9 +2,12 @@ # Block device driver configuration # -if BLOCK +menuconfig BLK_DEV + bool "Block devices" + depends on BLOCK + default y -menu "Block devices" +if BLK_DEV config BLK_DEV_FD tristate "Normal floppy disk support" @@ -56,40 +59,9 @@ config AMIGA_Z2RAM To compile this driver as a module, choose M here: the module will be called z2ram. -config ATARI_ACSI - tristate "Atari ACSI support" - depends on ATARI && BROKEN - ---help--- - This enables support for the Atari ACSI interface. The driver - supports hard disks and CD-ROMs, which have 512-byte sectors, or can - be switched to that mode. Due to the ACSI command format, only disks - up to 1 GB are supported. Special support for certain ACSI to SCSI - adapters, which could relax that, isn't included yet. The ACSI - driver is also the basis for certain other drivers for devices - attached to the ACSI bus: Atari SLM laser printer, BioNet-100 - Ethernet, and PAMsNet Ethernet. If you want to use one of these - devices, you need ACSI support, too. - - To compile this driver as a module, choose M here: the - module will be called acsi. - -comment "Some devices (e.g. CD jukebox) support multiple LUNs" - depends on ATARI && ATARI_ACSI - -config ACSI_MULTI_LUN - bool "Probe all LUNs on each ACSI device" - depends on ATARI_ACSI - help - If you have a ACSI device that supports more than one LUN (Logical - Unit Number), e.g. a CD jukebox, you should say Y here so that all - will be found by the ACSI driver. An ACSI device with multiple LUNs - acts logically like multiple ACSI devices. The vast majority of ACSI - devices have only one LUN, and so most people can say N here and - should in fact do so, because it is safer. - config ATARI_SLM tristate "Atari SLM laser printer support" - depends on ATARI && ATARI_ACSI!=n + depends on ATARI help If you have an Atari SLM laser printer, say Y to include support for it in the kernel. Otherwise, say N. This driver is also available as @@ -453,6 +425,4 @@ config ATA_OVER_ETH source "drivers/s390/block/Kconfig" -endmenu - -endif +endif # BLK_DEV diff --git a/drivers/block/Makefile b/drivers/block/Makefile index dd88e33c1eb..e5f98acc5d5 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY) += swim3.o obj-$(CONFIG_BLK_DEV_FD) += floppy.o obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o -obj-$(CONFIG_ATARI_ACSI) += acsi.o obj-$(CONFIG_ATARI_SLM) += acsi_slm.o obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o obj-$(CONFIG_BLK_DEV_RAM) += rd.o diff --git a/drivers/block/acsi.c b/drivers/block/acsi.c deleted file mode 100644 index e3d9152e231..00000000000 --- a/drivers/block/acsi.c +++ /dev/null @@ -1,1825 +0,0 @@ -/* - * acsi.c -- Device driver for Atari ACSI hard disks - * - * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de> - * - * Some parts are based on hd.c by Linus Torvalds - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - * - */ - -/* - * Still to in this file: - * - If a command ends with an error status (!= 0), the following - * REQUEST SENSE commands (4 to fill the ST-DMA FIFO) are done by - * polling the _IRQ signal (not interrupt-driven). This should be - * avoided in future because it takes up a non-neglectible time in - * the interrupt service routine while interrupts are disabled. - * Maybe a timer interrupt will get lost :-( - */ - -/* - * General notes: - * - * - All ACSI devices (disks, CD-ROMs, ...) use major number 28. - * Minors are organized like it is with SCSI: The upper 4 bits - * identify the device, the lower 4 bits the partition. - * The device numbers (the upper 4 bits) are given in the same - * order as the devices are found on the bus. - * - Up to 8 LUNs are supported for each target (if CONFIG_ACSI_MULTI_LUN - * is defined), but only a total of 16 devices (due to minor - * numbers...). Note that Atari allows only a maximum of 4 targets - * (i.e. controllers, not devices) on the ACSI bus! - * - A optimizing scheme similar to SCSI scatter-gather is implemented. - * - Removable media are supported. After a medium change to device - * is reinitialized (partition check etc.). Also, if the device - * knows the PREVENT/ALLOW MEDIUM REMOVAL command, the door should - * be locked and unlocked when mounting the first or unmounting the - * last filesystem on the device. The code is untested, because I - * don't have a removable hard disk. - * - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/genhd.h> -#include <linux/delay.h> -#include <linux/mm.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <scsi/scsi.h> /* for SCSI_IOCTL_GET_IDLUN */ -#include <scsi/scsi_ioctl.h> -#include <linux/hdreg.h> /* for HDIO_GETGEO */ -#include <linux/blkpg.h> -#include <linux/buffer_head.h> -#include <linux/blkdev.h> - -#include <asm/setup.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/atarihw.h> -#include <asm/atariints.h> -#include <asm/atari_acsi.h> -#include <asm/atari_stdma.h> -#include <asm/atari_stram.h> - -static void (*do_acsi)(void) = NULL; -static struct request_queue *acsi_queue; -#define QUEUE (acsi_queue) -#define CURRENT elv_next_request(acsi_queue) - -#define DEBUG -#undef DEBUG_DETECT -#undef NO_WRITE - -#define MAX_ERRORS 8 /* Max read/write errors/sector */ -#define MAX_LUN 8 /* Max LUNs per target */ -#define MAX_DEV 16 - -#define ACSI_BUFFER_SIZE (16*1024) /* "normal" ACSI buffer size */ -#define ACSI_BUFFER_MINSIZE (2048) /* min. buf size if ext. DMA */ -#define ACSI_BUFFER_SIZE_ORDER 2 /* order size for above */ -#define ACSI_BUFFER_MINSIZE_ORDER 0 /* order size for above */ -#define ACSI_BUFFER_SECTORS (ACSI_BUFFER_SIZE/512) - -#define ACSI_BUFFER_ORDER \ - (ATARIHW_PRESENT(EXTD_DMA) ? \ - ACSI_BUFFER_MINSIZE_ORDER : \ - ACSI_BUFFER_SIZE_ORDER) - -#define ACSI_TIMEOUT (4*HZ) - -/* minimum delay between two commands */ - -#define COMMAND_DELAY 500 - -typedef enum { - NONE, HARDDISK, CDROM -} ACSI_TYPE; - -struct acsi_info_struct { - ACSI_TYPE type; /* type of device */ - unsigned target; /* target number */ - unsigned lun; /* LUN in target controller */ - unsigned removable : 1; /* Flag for removable media */ - unsigned read_only : 1; /* Flag for read only devices */ - unsigned old_atari_disk : 1; /* Is an old Atari disk */ - unsigned changed : 1; /* Medium has been changed */ - unsigned long size; /* #blocks */ - int access_count; -} acsi_info[MAX_DEV]; - -/* - * SENSE KEYS - */ - -#define NO_SENSE 0x00 -#define RECOVERED_ERROR 0x01 -#define NOT_READY 0x02 -#define MEDIUM_ERROR 0x03 -#define HARDWARE_ERROR 0x04 -#define ILLEGAL_REQUEST 0x05 -#define UNIT_ATTENTION 0x06 -#define DATA_PROTECT 0x07 -#define BLANK_CHECK 0x08 -#define COPY_ABORTED 0x0a -#define ABORTED_COMMAND 0x0b -#define VOLUME_OVERFLOW 0x0d -#define MISCOMPARE 0x0e - - -/* - * DEVICE TYPES - */ - -#define TYPE_DISK 0x00 -#define TYPE_TAPE 0x01 -#define TYPE_WORM 0x04 -#define TYPE_ROM 0x05 -#define TYPE_MOD 0x07 -#define TYPE_NO_LUN 0x7f - -/* The data returned by MODE SENSE differ between the old Atari - * hard disks and SCSI disks connected to ACSI. In the following, both - * formats are defined and some macros to operate on them potably. - */ - -typedef struct { - unsigned long dummy[2]; - unsigned long sector_size; - unsigned char format_code; -#define ATARI_SENSE_FORMAT_FIX 1 -#define ATARI_SENSE_FORMAT_CHNG 2 - unsigned char cylinders_h; - unsigned char cylinders_l; - unsigned char heads; - unsigned char reduced_h; - unsigned char reduced_l; - unsigned char precomp_h; - unsigned char precomp_l; - unsigned char landing_zone; - unsigned char steprate; - unsigned char type; -#define ATARI_SENSE_TYPE_FIXCHNG_MASK 4 -#define ATARI_SENSE_TYPE_SOFTHARD_MASK 8 -#define ATARI_SENSE_TYPE_FIX 4 -#define ATARI_SENSE_TYPE_CHNG 0 -#define ATARI_SENSE_TYPE_SOFT 0 -#define ATARI_SENSE_TYPE_HARD 8 - unsigned char sectors; -} ATARI_SENSE_DATA; - -#define ATARI_CAPACITY(sd) \ - (((int)((sd).cylinders_h<<8)|(sd).cylinders_l) * \ - (sd).heads * (sd).sectors) - - -typedef struct { - unsigned char dummy1; - unsigned char medium_type; - unsigned char dummy2; - unsigned char descriptor_size; - unsigned long block_count; - unsigned long sector_size; - /* Page 0 data */ - unsigned char page_code; - unsigned char page_size; - unsigned char page_flags; - unsigned char qualifier; -} SCSI_SENSE_DATA; - -#define SCSI_CAPACITY(sd) ((sd).block_count & 0xffffff) - - -typedef union { - ATARI_SENSE_DATA atari; - SCSI_SENSE_DATA scsi; -} SENSE_DATA; - -#define SENSE_TYPE_UNKNOWN 0 -#define SENSE_TYPE_ATARI 1 -#define SENSE_TYPE_SCSI 2 - -#define SENSE_TYPE(sd) \ - (((sd).atari.dummy[0] == 8 && \ - ((sd).atari.format_code == 1 || \ - (sd).atari.format_code == 2)) ? SENSE_TYPE_ATARI : \ - ((sd).scsi.dummy1 >= 11) ? SENSE_TYPE_SCSI : \ - SENSE_TYPE_UNKNOWN) - -#define CAPACITY(sd) \ - (SENSE_TYPE(sd) == SENSE_TYPE_ATARI ? \ - ATARI_CAPACITY((sd).atari) : \ - SCSI_CAPACITY((sd).scsi)) - -#define SECTOR_SIZE(sd) \ - (SENSE_TYPE(sd) == SENSE_TYPE_ATARI ? \ - (sd).atari.sector_size : \ - (sd).scsi.sector_size & 0xffffff) - -/* Default size if capacity cannot be determined (1 GByte) */ -#define DEFAULT_SIZE 0x1fffff - -#define CARTRCH_STAT(aip,buf) \ - (aip->old_atari_disk ? \ - (((buf)[0] & 0x7f) == 0x28) : \ - ((((buf)[0] & 0x70) == 0x70) ? \ - (((buf)[2] & 0x0f) == 0x06) : \ - (((buf)[0] & 0x0f) == 0x06))) \ - -/* These two are also exported to other drivers that work on the ACSI bus and - * need an ST-RAM buffer. */ -char *acsi_buffer; -unsigned long phys_acsi_buffer; - -static int NDevices; - -static int CurrentNReq; -static int CurrentNSect; -static char *CurrentBuffer; - -static DEFINE_SPINLOCK(acsi_lock); - - -#define SET_TIMER() mod_timer(&acsi_timer, jiffies + ACSI_TIMEOUT) -#define CLEAR_TIMER() del_timer(&acsi_timer) - -static unsigned long STramMask; -#define STRAM_ADDR(a) (((a) & STramMask) == 0) - - - -/* ACSI commands */ - -static char tur_cmd[6] = { 0x00, 0, 0, 0, 0, 0 }; -static char modesense_cmd[6] = { 0x1a, 0, 0, 0, 24, 0 }; -static char modeselect_cmd[6] = { 0x15, 0, 0, 0, 12, 0 }; -static char inquiry_cmd[6] = { 0x12, 0, 0, 0,255, 0 }; -static char reqsense_cmd[6] = { 0x03, 0, 0, 0, 4, 0 }; -static char read_cmd[6] = { 0x08, 0, 0, 0, 0, 0 }; -static char write_cmd[6] = { 0x0a, 0, 0, 0, 0, 0 }; -static char pa_med_rem_cmd[6] = { 0x1e, 0, 0, 0, 0, 0 }; - -#define CMDSET_TARG_LUN(cmd,targ,lun) \ - do { \ - cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5; \ - cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5; \ - } while(0) - -#define CMDSET_BLOCK(cmd,blk) \ - do { \ - unsigned long __blk = (blk); \ - cmd[3] = __blk; __blk >>= 8; \ - cmd[2] = __blk; __blk >>= 8; \ - cmd[1] = (cmd[1] & 0xe0) | (__blk & 0x1f); \ - } while(0) - -#define CMDSET_LEN(cmd,len) \ - do { \ - cmd[4] = (len); \ - } while(0) - -/* ACSI errors (from REQUEST SENSE); There are two tables, one for the - * old Atari disks and one for SCSI on ACSI disks. - */ - -struct acsi_error { - unsigned char code; - const char *text; -} atari_acsi_errors[] = { - { 0x00, "No error (??)" }, - { 0x01, "No index pulses" }, - { 0x02, "Seek not complete" }, - { 0x03, "Write fault" }, - { 0x04, "Drive not ready" }, - { 0x06, "No Track 00 signal" }, - { 0x10, "ECC error in ID field" }, - { 0x11, "Uncorrectable data error" }, - { 0x12, "ID field address mark not found" }, - { 0x13, "Data field address mark not found" }, - { 0x14, "Record not found" }, - { 0x15, "Seek error" }, - { 0x18, "Data check in no retry mode" }, - { 0x19, "ECC error during verify" }, - { 0x1a, "Access to bad block" }, - { 0x1c, "Unformatted or bad format" }, - { 0x20, "Invalid command" }, - { 0x21, "Invalid block address" }, - { 0x23, "Volume overflow" }, - { 0x24, "Invalid argument" }, - { 0x25, "Invalid drive number" }, - { 0x26, "Byte zero parity check" }, - { 0x28, "Cartride changed" }, - { 0x2c, "Error count overflow" }, - { 0x30, "Controller selftest failed" } -}, - - scsi_acsi_errors[] = { - { 0x00, "No error (??)" }, - { 0x01, "Recovered error" }, - { 0x02, "Drive not ready" }, - { 0x03, "Uncorrectable medium error" }, - { 0x04, "Hardware error" }, - { 0x05, "Illegal request" }, - { 0x06, "Unit attention (Reset or cartridge changed)" }, - { 0x07, "Data protection" }, - { 0x08, "Blank check" }, - { 0x0b, "Aborted Command" }, - { 0x0d, "Volume overflow" } -}; - - - -/***************************** Prototypes *****************************/ - -static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int - rwflag, int enable); -static int acsi_reqsense( char *buffer, int targ, int lun); -static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip); -static irqreturn_t acsi_interrupt (int irq, void *data); -static void unexpected_acsi_interrupt( void ); -static void bad_rw_intr( void ); -static void read_intr( void ); -static void write_intr( void); -static void acsi_times_out( unsigned long dummy ); -static void copy_to_acsibuffer( void ); -static void copy_from_acsibuffer( void ); -static void do_end_requests( void ); -static void do_acsi_request( request_queue_t * ); -static void redo_acsi_request( void ); -static int acsi_ioctl( struct inode *inode, struct file *file, unsigned int - cmd, unsigned long arg ); -static int acsi_open( struct inode * inode, struct file * filp ); -static int acsi_release( struct inode * inode, struct file * file ); -static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag ); -static int acsi_change_blk_size( int target, int lun); -static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd ); -static int acsi_revalidate (struct gendisk *disk); - -/************************* End of Prototypes **************************/ - - -DEFINE_TIMER(acsi_timer, acsi_times_out, 0, 0); - - -#ifdef CONFIG_ATARI_SLM - -extern int attach_slm( int target, int lun ); -extern int slm_init( void ); - -#endif - - - -/*********************************************************************** - * - * ACSI primitives - * - **********************************************************************/ - - -/* - * The following two functions wait for _IRQ to become Low or High, - * resp., with a timeout. The 'timeout' parameter is in jiffies - * (10ms). - * If the functions are called with timer interrupts on (int level < - * 6), the timeout is based on the 'jiffies' variable to provide exact - * timeouts for device probing etc. - * If interrupts are disabled, the number of tries is based on the - * 'loops_per_jiffy' variable. A rough estimation is sufficient here... - */ - -#define INT_LEVEL \ - ({ unsigned __sr; \ - __asm__ __volatile__ ( "movew %/sr,%0" : "=dm" (__sr) ); \ - (__sr >> 8) & 7; \ - }) - -int acsi_wait_for_IRQ( unsigned timeout ) - -{ - if (INT_LEVEL < 6) { - unsigned long maxjif = jiffies + timeout; - while (time_before(jiffies, maxjif)) - if (!(mfp.par_dt_reg & 0x20)) return( 1 ); - } - else { - long tries = loops_per_jiffy / 8 * timeout; - while( --tries >= 0 ) - if (!(mfp.par_dt_reg & 0x20)) return( 1 ); - } - return( 0 ); /* timeout! */ -} - - -int acsi_wait_for_noIRQ( unsigned timeout ) - -{ - if (INT_LEVEL < 6) { - unsigned long maxjif = jiffies + timeout; - while (time_before(jiffies, maxjif)) - if (mfp.par_dt_reg & 0x20) return( 1 ); - } - else { - long tries = loops_per_jiffy * timeout / 8; - while( tries-- >= 0 ) - if (mfp.par_dt_reg & 0x20) return( 1 ); - } - return( 0 ); /* timeout! */ -} - -static struct timeval start_time; - -void -acsi_delay_start(void) -{ - do_gettimeofday(&start_time); -} - -/* wait from acsi_delay_start to now usec (<1E6) usec */ - -void -acsi_delay_end(long usec) -{ - struct timeval end_time; - long deltau,deltas; - do_gettimeofday(&end_time); - deltau=end_time.tv_usec - start_time.tv_usec; - deltas=end_time.tv_sec - start_time.tv_sec; - if (deltas > 1 || deltas < 0) - return; - if (deltas > 0) - deltau += 1000*1000; - if (deltau >= usec) - return; - udelay(usec-deltau); -} - -/* acsicmd_dma() sends an ACSI command and sets up the DMA to transfer - * 'blocks' blocks of 512 bytes from/to 'buffer'. - * Because the _IRQ signal is used for handshaking the command bytes, - * the ACSI interrupt has to be disabled in this function. If the end - * of the operation should be signalled by a real interrupt, it has to be - * reenabled afterwards. - */ - -static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int rwflag, int enable) - -{ unsigned long flags, paddr; - int i; - -#ifdef NO_WRITE - if (rwflag || *cmd == 0x0a) { - printk( "ACSI: Write commands disabled!\n" ); - return( 0 ); - } -#endif - - rwflag = rwflag ? 0x100 : 0; - paddr = virt_to_phys( buffer ); - - acsi_delay_end(COMMAND_DELAY); - DISABLE_IRQ(); - - local_irq_save(flags); - /* Low on A1 */ - dma_wd.dma_mode_status = 0x88 | rwflag; - MFPDELAY(); - - /* set DMA address */ - dma_wd.dma_lo = (unsigned char)paddr; - paddr >>= 8; - MFPDELAY(); - dma_wd.dma_md = (unsigned char)paddr; - paddr >>= 8; - MFPDELAY(); - if (ATARIHW_PRESENT(EXTD_DMA)) - st_dma_ext_dmahi = (unsigned short)paddr; - else - dma_wd.dma_hi = (unsigned char)paddr; - MFPDELAY(); - local_irq_restore(flags); - - /* send the command bytes except the last */ - for( i = 0; i < 5; ++i ) { - DMA_LONG_WRITE( *cmd++, 0x8a | rwflag ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - } - - /* Clear FIFO and switch DMA to correct direction */ - dma_wd.dma_mode_status = 0x92 | (rwflag ^ 0x100); - MFPDELAY(); - dma_wd.dma_mode_status = 0x92 | rwflag; - MFPDELAY(); - - /* How many sectors for DMA */ - dma_wd.fdc_acces_seccount = blocks; - MFPDELAY(); - - /* send last command byte */ - dma_wd.dma_mode_status = 0x8a | rwflag; - MFPDELAY(); - DMA_LONG_WRITE( *cmd++, 0x0a | rwflag ); - if (enable) - ENABLE_IRQ(); - udelay(80); - - return( 1 ); -} - - -/* - * acsicmd_nodma() sends an ACSI command that requires no DMA. - */ - -int acsicmd_nodma( const char *cmd, int enable) - -{ int i; - - acsi_delay_end(COMMAND_DELAY); - DISABLE_IRQ(); - - /* send first command byte */ - dma_wd.dma_mode_status = 0x88; - MFPDELAY(); - DMA_LONG_WRITE( *cmd++, 0x8a ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - - /* send the intermediate command bytes */ - for( i = 0; i < 4; ++i ) { - DMA_LONG_WRITE( *cmd++, 0x8a ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - } - - /* send last command byte */ - DMA_LONG_WRITE( *cmd++, 0x0a ); - if (enable) - ENABLE_IRQ(); - udelay(80); - - return( 1 ); - /* Note that the ACSI interrupt is still disabled after this - * function. If you want to get the IRQ delivered, enable it manually! - */ -} - - -static int acsi_reqsense( char *buffer, int targ, int lun) - -{ - CMDSET_TARG_LUN( reqsense_cmd, targ, lun); - if (!acsicmd_dma( reqsense_cmd, buffer, 1, 0, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - dma_cache_maintenance( virt_to_phys(buffer), 16, 0 ); - - return( 1 ); -} - - -/* - * ACSI status phase: get the status byte from the bus - * - * I've seen several times that a 0xff status is read, propably due to - * a timing error. In this case, the procedure is repeated after the - * next _IRQ edge. - */ - -int acsi_getstatus( void ) - -{ int status; - - DISABLE_IRQ(); - for(;;) { - if (!acsi_wait_for_IRQ( 100 )) { - acsi_delay_start(); - return( -1 ); - } - dma_wd.dma_mode_status = 0x8a; - MFPDELAY(); - status = dma_wd.fdc_acces_seccount; - if (status != 0xff) break; -#ifdef DEBUG - printk("ACSI: skipping 0xff status byte\n" ); -#endif - udelay(40); - acsi_wait_for_noIRQ( 20 ); - } - dma_wd.dma_mode_status = 0x80; - udelay(40); - acsi_wait_for_noIRQ( 20 ); - - acsi_delay_start(); - return( status & 0x1f ); /* mask of the device# */ -} - - -#if (defined(CONFIG_ATARI_SLM) || defined(CONFIG_ATARI_SLM_MODULE)) - -/* Receive data in an extended status phase. Needed by SLM printer. */ - -int acsi_extstatus( char *buffer, int cnt ) - -{ int status; - - DISABLE_IRQ(); - udelay(80); - while( cnt-- > 0 ) { - if (!acsi_wait_for_IRQ( 40 )) return( 0 ); - dma_wd.dma_mode_status = 0x8a; - MFPDELAY(); - status = dma_wd.fdc_acces_seccount; - MFPDELAY(); - *buffer++ = status & 0xff; - udelay(40); - } - return( 1 ); -} - - -/* Finish an extended status phase */ - -void acsi_end_extstatus( void ) - -{ - dma_wd.dma_mode_status = 0x80; - udelay(40); - acsi_wait_for_noIRQ( 20 ); - acsi_delay_start(); -} - - -/* Send data in an extended command phase */ - -int acsi_extcmd( unsigned char *buffer, int cnt ) - -{ - while( cnt-- > 0 ) { - DMA_LONG_WRITE( *buffer++, 0x8a ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - } - return( 1 ); -} - -#endif - - -static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip) - -{ int atari_err, i, errcode; - struct acsi_error *arr; - - atari_err = aip->old_atari_disk; - if (atari_err) - errcode = errblk[0] & 0x7f; - else - if ((errblk[0] & 0x70) == 0x70) - errcode = errblk[2] & 0x0f; - else - errcode = errblk[0] & 0x0f; - - printk( KERN_ERR "ACSI error 0x%02x", errcode ); - - if (errblk[0] & 0x80) - printk( " for sector %d", - ((errblk[1] & 0x1f) << 16) | - (errblk[2] << 8) | errblk[0] ); - - arr = atari_err ? atari_acsi_errors : scsi_acsi_errors; - i = atari_err ? sizeof(atari_acsi_errors)/sizeof(*atari_acsi_errors) : - sizeof(scsi_acsi_errors)/sizeof(*scsi_acsi_errors); - - for( --i; i >= 0; --i ) - if (arr[i].code == errcode) break; - if (i >= 0) - printk( ": %s\n", arr[i].text ); -} - -/******************************************************************* - * - * ACSI interrupt routine - * Test, if this is a ACSI interrupt and call the irq handler - * Otherwise ignore this interrupt. - * - *******************************************************************/ - -static irqreturn_t acsi_interrupt(int irq, void *data ) - -{ void (*acsi_irq_handler)(void) = do_acsi; - - do_acsi = NULL; - CLEAR_TIMER(); - - if (!acsi_irq_handler) - acsi_irq_handler = unexpected_acsi_interrupt; - acsi_irq_handler(); - return IRQ_HANDLED; -} - - -/****************************************************************** - * - * The Interrupt handlers - * - *******************************************************************/ - - -static void unexpected_acsi_interrupt( void ) - -{ - printk( KERN_WARNING "Unexpected ACSI interrupt\n" ); -} - - -/* This function is called in case of errors. Because we cannot reset - * the ACSI bus or a single device, there is no other choice than - * retrying several times :-( - */ - -static void bad_rw_intr( void ) - -{ - if (!CURRENT) - return; - - if (++CURRENT->errors >= MAX_ERRORS) - end_request(CURRENT, 0); - /* Otherwise just retry */ -} - - -static void read_intr( void ) - -{ int status; - - status = acsi_getstatus(); - if (status != 0) { - struct gendisk *disk = CURRENT->rq_disk; - struct acsi_info_struct *aip = disk->private_data; - printk(KERN_ERR "%s: ", disk->disk_name); - if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun)) - printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status ); - else { - acsi_print_error(acsi_buffer, aip); - if (CARTRCH_STAT(aip, acsi_buffer)) - aip->changed = 1; - } - ENABLE_IRQ(); - bad_rw_intr(); - redo_acsi_request(); - return; - } - - dma_cache_maintenance( virt_to_phys(CurrentBuffer), CurrentNSect*512, 0 ); - if (CurrentBuffer == acsi_buffer) - copy_from_acsibuffer(); - - do_end_requests(); - redo_acsi_request(); -} - - -static void write_intr(void) - -{ int status; - - status = acsi_getstatus(); - if (status != 0) { - struct gendisk *disk = CURRENT->rq_disk; - struct acsi_info_struct *aip = disk->private_data; - printk( KERN_ERR "%s: ", disk->disk_name); - if (!acsi_reqsense( acsi_buffer, aip->target, aip->lun)) - printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status ); - else { - acsi_print_error(acsi_buffer, aip); - if (CARTRCH_STAT(aip, acsi_buffer)) - aip->changed = 1; - } - bad_rw_intr(); - redo_acsi_request(); - return; - } - - do_end_requests(); - redo_acsi_request(); -} - - -static void acsi_times_out( unsigned long dummy ) - -{ - DISABLE_IRQ(); - if (!do_acsi) return; - - do_acsi = NULL; - printk( KERN_ERR "ACSI timeout\n" ); - if (!CURRENT) - return; - if (++CURRENT->errors >= MAX_ERRORS) { -#ifdef DEBUG - printk( KERN_ERR "ACSI: too many errors.\n" ); -#endif - end_request(CURRENT, 0); - } - - redo_acsi_request(); -} - - - -/*********************************************************************** - * - * Scatter-gather utility functions - * - ***********************************************************************/ - - -static void copy_to_acsibuffer( void ) - -{ int i; - char *src, *dst; - struct buffer_head *bh; - - src = CURRENT->buffer; - dst = acsi_buffer; - bh = CURRENT->bh; - - if (!bh) - memcpy( dst, src, CurrentNSect*512 ); - else - for( i = 0; i < CurrentNReq; ++i ) { - memcpy( dst, src, bh->b_size ); - dst += bh->b_size; - if ((bh = bh->b_reqnext)) - src = bh->b_data; - } -} - - -static void copy_from_acsibuffer( void ) - -{ int i; - char *src, *dst; - struct buffer_head *bh; - - dst = CURRENT->buffer; - src = acsi_buffer; - bh = CURRENT->bh; - - if (!bh) - memcpy( dst, src, CurrentNSect*512 ); - else - for( i = 0; i < CurrentNReq; ++i ) { - memcpy( dst, src, bh->b_size ); - src += bh->b_size; - if ((bh = bh->b_reqnext)) - dst = bh->b_data; - } -} - - -static void do_end_requests( void ) - -{ int i, n; - - if (!CURRENT->bh) { - CURRENT->nr_sectors -= CurrentNSect; - CURRENT->current_nr_sectors -= CurrentNSect; - CURRENT->sector += CurrentNSect; - if (CURRENT->nr_sectors == 0) - end_request(CURRENT, 1); - } - else { - for( i = 0; i < CurrentNReq; ++i ) { - n = CURRENT->bh->b_size >> 9; - CURRENT->nr_sectors -= n; - CURRENT->current_nr_sectors -= n; - CURRENT->sector += n; - end_request(CURRENT, 1); - } - } -} - - - - -/*********************************************************************** - * - * do_acsi_request and friends - * - ***********************************************************************/ - -static void do_acsi_request( request_queue_t * q ) - -{ - stdma_lock( acsi_interrupt, NULL ); - redo_acsi_request(); -} - - -static void redo_acsi_request( void ) -{ - unsigned block, target, lun, nsect; - char *buffer; - unsigned long pbuffer; - struct buffer_head *bh; - struct gendisk *disk; - struct acsi_info_struct *aip; - - repeat: - CLEAR_TIMER(); - - if (do_acsi) - return; - - if (!CURRENT) { - do_acsi = NULL; - ENABLE_IRQ(); - stdma_release(); - return; - } - - disk = CURRENT->rq_disk; - aip = disk->private_data; - if (CURRENT->bh) { - if (!CURRENT->bh && !buffer_locked(CURRENT->bh)) - panic("ACSI: block not locked"); - } - - block = CURRENT->sector; - if (block+CURRENT->nr_sectors >= get_capacity(disk)) { -#ifdef DEBUG - printk( "%s: attempted access for blocks %d...%ld past end of device at block %ld.\n", - disk->disk_name, - block, block + CURRENT->nr_sectors - 1, - get_capacity(disk)); -#endif - end_request(CURRENT, 0); - goto repeat; - } - if (aip->changed) { - printk( KERN_NOTICE "%s: request denied because cartridge has " - "been changed.\n", disk->disk_name); - end_request(CURRENT, 0); - goto repeat; - } - - target = aip->target; - lun = aip->lun; - - /* Find out how many sectors should be transferred from/to - * consecutive buffers and thus can be done with a single command. - */ - buffer = CURRENT->buffer; - pbuffer = virt_to_phys(buffer); - nsect = CURRENT->current_nr_sectors; - CurrentNReq = 1; - - if ((bh = CURRENT->bh) && bh != CURRENT->bhtail) { - if (!STRAM_ADDR(pbuffer)) { - /* If transfer is done via the ACSI buffer anyway, we can - * assemble as much bh's as fit in the buffer. - */ - while( (bh = bh->b_reqnext) ) { - if (nsect + (bh->b_size>>9) > ACSI_BUFFER_SECTORS) break; - nsect += bh->b_size >> 9; - ++CurrentNReq; - if (bh == CURRENT->bhtail) break; - } - buffer = acsi_buffer; - pbuffer = phys_acsi_buffer; - } - else { - unsigned long pendadr, pnewadr; - pendadr = pbuffer + nsect*512; - while( (bh = bh->b_reqnext) ) { - pnewadr = virt_to_phys(bh->b_data); - if (!STRAM_ADDR(pnewadr) || pendadr != pnewadr) break; - nsect += bh->b_size >> 9; - pendadr = pnewadr + bh->b_size; - ++CurrentNReq; - if (bh == CURRENT->bhtail) break; - } - } - } - else { - if (!STRAM_ADDR(pbuffer)) { - buffer = acsi_buffer; - pbuffer = phys_acsi_buffer; - if (nsect > ACSI_BUFFER_SECTORS) - nsect = ACSI_BUFFER_SECTORS; - } - } - CurrentBuffer = buffer; - CurrentNSect = nsect; - - if (rq_data_dir(CURRENT) == WRITE) { - CMDSET_TARG_LUN( write_cmd, target, lun ); - CMDSET_BLOCK( write_cmd, block ); - CMDSET_LEN( write_cmd, nsect ); - if (buffer == acsi_buffer) - copy_to_acsibuffer(); - dma_cache_maintenance( pbuffer, nsect*512, 1 ); - do_acsi = write_intr; - if (!acsicmd_dma( write_cmd, buffer, nsect, 1, 1)) { - do_acsi = NULL; - printk( KERN_ERR "ACSI (write): Timeout in command block\n" ); - bad_rw_intr(); - goto repeat; - } - SET_TIMER(); - return; - } - if (rq_data_dir(CURRENT) == READ) { - CMDSET_TARG_LUN( read_cmd, target, lun ); - CMDSET_BLOCK( read_cmd, block ); - CMDSET_LEN( read_cmd, nsect ); - do_acsi = read_intr; - if (!acsicmd_dma( read_cmd, buffer, nsect, 0, 1)) { - do_acsi = NULL; - printk( KERN_ERR "ACSI (read): Timeout in command block\n" ); - bad_rw_intr(); - goto repeat; - } - SET_TIMER(); - return; - } - panic("unknown ACSI command"); -} - - - -/*********************************************************************** - * - * Misc functions: ioctl, open, release, check_change, ... - * - ***********************************************************************/ - -static int acsi_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct acsi_info_struct *aip = bdev->bd_disk->private_data; - - /* - * Just fake some geometry here, it's nonsense anyway - * To make it easy, use Adaptec's usual 64/32 mapping - */ - geo->heads = 64; - geo->sectors = 32; - geo->cylinders = aip->size >> 11; - return 0; -} - -static int acsi_ioctl( struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg ) -{ - struct gendisk *disk = inode->i_bdev->bd_disk; - struct acsi_info_struct *aip = disk->private_data; - switch (cmd) { - case SCSI_IOCTL_GET_IDLUN: - /* SCSI compatible GET_IDLUN call to get target's ID and LUN number */ - put_user( aip->target | (aip->lun << 8), - &((Scsi_Idlun *) arg)->dev_id ); - put_user( 0, &((Scsi_Idlun *) arg)->host_unique_id ); - return 0; - default: - return -EINVAL; - } -} - - -/* - * Open a device, check for read-only and lock the medium if it is - * removable. - * - * Changes by Martin Rogge, 9th Aug 1995: - * Check whether check_disk_change (and therefore revalidate_acsidisk) - * was successful. They fail when there is no medium in the drive. - * - * The problem of media being changed during an operation can be - * ignored because of the prevent_removal code. - * - * Added check for the validity of the device number. - * - */ - -static int acsi_open( struct inode * inode, struct file * filp ) -{ - struct gendisk *disk = inode->i_bdev->bd_disk; - struct acsi_info_struct *aip = disk->private_data; - - if (aip->access_count == 0 && aip->removable) { -#if 0 - aip->changed = 1; /* safety first */ -#endif - check_disk_change( inode->i_bdev ); - if (aip->changed) /* revalidate was not successful (no medium) */ - return -ENXIO; - acsi_prevent_removal(aip, 1); - } - aip->access_count++; - - if (filp && filp->f_mode) { - check_disk_change( inode->i_bdev ); - if (filp->f_mode & 2) { - if (aip->read_only) { - acsi_release( inode, filp ); - return -EROFS; - } - } - } - - return 0; -} - -/* - * Releasing a block device means we sync() it, so that it can safely - * be forgotten about... - */ - -static int acsi_release( struct inode * inode, struct file * file ) -{ - struct gendisk *disk = inode->i_bdev->bd_disk; - struct acsi_info_struct *aip = disk->private_data; - if (--aip->access_count == 0 && aip->removable) - acsi_prevent_removal(aip, 0); - return( 0 ); -} - -/* - * Prevent or allow a media change for removable devices. - */ - -static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag) -{ - stdma_lock( NULL, NULL ); - - CMDSET_TARG_LUN(pa_med_rem_cmd, aip->target, aip->lun); - CMDSET_LEN( pa_med_rem_cmd, flag ); - - if (acsicmd_nodma(pa_med_rem_cmd, 0) && acsi_wait_for_IRQ(3*HZ)) - acsi_getstatus(); - /* Do not report errors -- some devices may not know this command. */ - - ENABLE_IRQ(); - stdma_release(); -} - -static int acsi_media_change(struct gendisk *disk) -{ - struct acsi_info_struct *aip = disk->private_data; - - if (!aip->removable) - return 0; - - if (aip->changed) - /* We can be sure that the medium has been changed -- REQUEST - * SENSE has reported this earlier. - */ - return 1; - - /* If the flag isn't set, make a test by reading block 0. - * If errors happen, it seems to be better to say "changed"... - */ - stdma_lock( NULL, NULL ); - CMDSET_TARG_LUN(read_cmd, aip->target, aip->lun); - CMDSET_BLOCK( read_cmd, 0 ); - CMDSET_LEN( read_cmd, 1 ); - if (acsicmd_dma(read_cmd, acsi_buffer, 1, 0, 0) && - acsi_wait_for_IRQ(3*HZ)) { - if (acsi_getstatus()) { - if (acsi_reqsense(acsi_buffer, aip->target, aip->lun)) { - if (CARTRCH_STAT(aip, acsi_buffer)) - aip->changed = 1; - } - else { - printk( KERN_ERR "%s: REQUEST SENSE failed in test for " - "medium change; assuming a change\n", disk->disk_name ); - aip->changed = 1; - } - } - } - else { - printk( KERN_ERR "%s: Test for medium changed timed out; " - "assuming a change\n", disk->disk_name); - aip->changed = 1; - } - ENABLE_IRQ(); - stdma_release(); - - /* Now, after reading a block, the changed status is surely valid. */ - return aip->changed; -} - - -static int acsi_change_blk_size( int target, int lun) - -{ int i; - - for (i=0; i<12; i++) - acsi_buffer[i] = 0; - - acsi_buffer[3] = 8; - acsi_buffer[10] = 2; - CMDSET_TARG_LUN( modeselect_cmd, target, lun); - - if (!acsicmd_dma( modeselect_cmd, acsi_buffer, 1,1,0) || - !acsi_wait_for_IRQ( 3*HZ ) || - acsi_getstatus() != 0 ) { - return(0); - } - return(1); -} - - -static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd ) - -{ - int page; - - CMDSET_TARG_LUN( modesense_cmd, target, lun ); - for (page=0; page<4; page++) { - modesense_cmd[2] = page; - if (!acsicmd_dma( modesense_cmd, acsi_buffer, 1, 0, 0 ) || - !acsi_wait_for_IRQ( 3*HZ ) || - acsi_getstatus()) - continue; - - /* read twice to jump over the second 16-byte border! */ - udelay(300); - if (acsi_wait_for_noIRQ( 20 ) && - acsicmd_nodma( modesense_cmd, 0 ) && - acsi_wait_for_IRQ( 3*HZ ) && - acsi_getstatus() == 0) - break; - } - if (page == 4) { - return(0); - } - - dma_cache_maintenance( phys_acsi_buffer, sizeof(SENSE_DATA), 0 ); - *sd = *(SENSE_DATA *)acsi_buffer; - - /* Validity check, depending on type of data */ - - switch( SENSE_TYPE(*sd) ) { - - case SENSE_TYPE_ATARI: - if (CAPACITY(*sd) == 0) - goto invalid_sense; - break; - - case SENSE_TYPE_SCSI: - if (sd->scsi.descriptor_size != 8) - goto invalid_sense; - break; - - case SENSE_TYPE_UNKNOWN: - - printk( KERN_ERR "ACSI target %d, lun %d: Cannot interpret " - "sense data\n", target, lun ); - - invalid_sense: - -#ifdef DEBUG - { int i; - printk( "Mode sense data for ACSI target %d, lun %d seem not valid:", - target, lun ); - for( i = 0; i < sizeof(SENSE_DATA); ++i ) - printk( "%02x ", (unsigned char)acsi_buffer[i] ); - printk( "\n" ); - } -#endif - return( 0 ); - } - - return( 1 ); -} - - - -/******************************************************************* - * - * Initialization - * - ********************************************************************/ - - -extern struct block_device_operations acsi_fops; - -static struct gendisk *acsi_gendisk[MAX_DEV]; - -#define MAX_SCSI_DEVICE_CODE 10 - -static const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] = -{ - "Direct-Access ", - "Sequential-Access", - "Printer ", - "Processor ", - "WORM ", - "CD-ROM ", - "Scanner ", - "Optical Device ", - "Medium Changer ", - "Communications " -}; - -static void print_inquiry(unsigned char *data) -{ - int i; - - printk(KERN_INFO " Vendor: "); - for (i = 8; i < 16; i++) - { - if (data[i] >= 0x20 && i < data[4] + 5) - printk("%c", data[i]); - else - printk(" "); - } - - printk(" Model: "); - for (i = 16; i < 32; i++) - { - if (data[i] >= 0x20 && i < data[4] + 5) - printk("%c", data[i]); - else - printk(" "); - } - - printk(" Rev: "); - for (i = 32; i < 36; i++) - { - if (data[i] >= 0x20 && i < data[4] + 5) - printk("%c", data[i]); - else - printk(" "); - } - - printk("\n"); - - i = data[0] & 0x1f; - - printk(KERN_INFO " Type: %s ", (i < MAX_SCSI_DEVICE_CODE - ? scsi_device_types[i] - : "Unknown ")); - printk(" ANSI SCSI revision: %02x", data[2] & 0x07); - if ((data[2] & 0x07) == 1 && (data[3] & 0x0f) == 1) - printk(" CCS\n"); - else - printk("\n"); -} - - -/* - * Changes by Martin Rogge, 9th Aug 1995: - * acsi_devinit has been taken out of acsi_geninit, because it needs - * to be called from revalidate_acsidisk. The result of request sense - * is now checked for DRIVE NOT READY. - * - * The structure *aip is only valid when acsi_devinit returns - * DEV_SUPPORTED. - * - */ - -#define DEV_NONE 0 -#define DEV_UNKNOWN 1 -#define DEV_SUPPORTED 2 -#define DEV_SLM 3 - -static int acsi_devinit(struct acsi_info_struct *aip) -{ - int status, got_inquiry; - SENSE_DATA sense; - unsigned char reqsense, extsense; - - /*****************************************************************/ - /* Do a TEST UNIT READY command to test the presence of a device */ - /*****************************************************************/ - - CMDSET_TARG_LUN(tur_cmd, aip->target, aip->lun); - if (!acsicmd_nodma(tur_cmd, 0)) { - /* timed out -> no device here */ -#ifdef DEBUG_DETECT - printk("target %d lun %d: timeout\n", aip->target, aip->lun); -#endif - return DEV_NONE; - } - - /*************************/ - /* Read the ACSI status. */ - /*************************/ - - status = acsi_getstatus(); - if (status) { - if (status == 0x12) { - /* The SLM printer should be the only device that - * responds with the error code in the status byte. In - * correct status bytes, bit 4 is never set. - */ - printk( KERN_INFO "Detected SLM printer at id %d lun %d\n", - aip->target, aip->lun); - return DEV_SLM; - } - /* ignore CHECK CONDITION, since some devices send a - UNIT ATTENTION */ - if ((status & 0x1e) != 0x2) { -#ifdef DEBUG_DETECT - printk("target %d lun %d: status %d\n", - aip->target, aip->lun, status); -#endif - return DEV_UNKNOWN; - } - } - - /*******************************/ - /* Do a REQUEST SENSE command. */ - /*******************************/ - - if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun)) { - printk( KERN_WARNING "acsi_reqsense failed\n"); - acsi_buffer[0] = 0; - acsi_buffer[2] = UNIT_ATTENTION; - } - reqsense = acsi_buffer[0]; - extsense = acsi_buffer[2] & 0xf; - if (status) { - if ((reqsense & 0x70) == 0x70) { /* extended sense */ - if (extsense != UNIT_ATTENTION && - extsense != NOT_READY) { -#ifdef DEBUG_DETECT - printk("target %d lun %d: extended sense %d\n", - aip->target, aip->lun, extsense); -#endif - return DEV_UNKNOWN; - } - } - else { - if (reqsense & 0x7f) { -#ifdef DEBUG_DETECT - printk("target %d lun %d: sense %d\n", - aip->target, aip->lun, reqsense); -#endif - return DEV_UNKNOWN; - } - } - } - else - if (reqsense == 0x4) { /* SH204 Bug workaround */ -#ifdef DEBUG_DETECT - printk("target %d lun %d status=0 sense=4\n", - aip->target, aip->lun); -#endif - return DEV_UNKNOWN; - } - - /***********************************************************/ - /* Do an INQUIRY command to get more infos on this device. */ - /***********************************************************/ - - /* Assume default values */ - aip->removable = 1; - aip->read_only = 0; - aip->old_atari_disk = 0; - aip->changed = (extsense == NOT_READY); /* medium inserted? */ - aip->size = DEFAULT_SIZE; - got_inquiry = 0; - /* Fake inquiry result for old atari disks */ - memcpy(acsi_buffer, "\000\000\001\000 Adaptec 40xx" - " ", 40); - CMDSET_TARG_LUN(inquiry_cmd, aip->target, aip->lun); - if (acsicmd_dma(inquiry_cmd, acsi_buffer, 1, 0, 0) && - acsi_getstatus() == 0) { - acsicmd_nodma(inquiry_cmd, 0); - acsi_getstatus(); - dma_cache_maintenance( phys_acsi_buffer, 256, 0 ); - got_inquiry = 1; - aip->removable = !!(acsi_buffer[1] & 0x80); - } - if (aip->type == NONE) /* only at boot time */ - print_inquiry(acsi_buffer); - switch(acsi_buffer[0]) { - case TYPE_DISK: - aip->type = HARDDISK; - break; - case TYPE_ROM: - aip->type = CDROM; - aip->read_only = 1; - break; - default: - return DEV_UNKNOWN; - } - /****************************/ - /* Do a MODE SENSE command. */ - /****************************/ - - if (!acsi_mode_sense(aip->target, aip->lun, &sense)) { - printk( KERN_WARNING "No mode sense data.\n" ); - return DEV_UNKNOWN; - } - if ((SECTOR_SIZE(sense) != 512) && - ((aip->type != CDROM) || - !acsi_change_blk_size(aip->target, aip->lun) || - !acsi_mode_sense(aip->target, aip->lun, &sense) || - (SECTOR_SIZE(sense) != 512))) { - printk( KERN_WARNING "Sector size != 512 not supported.\n" ); - return DEV_UNKNOWN; - } - /* There are disks out there that claim to have 0 sectors... */ - if (CAPACITY(sense)) - aip->size = CAPACITY(sense); /* else keep DEFAULT_SIZE */ - if (!got_inquiry && SENSE_TYPE(sense) == SENSE_TYPE_ATARI) { - /* If INQUIRY failed and the sense data suggest an old - * Atari disk (SH20x, Megafile), the disk is not removable - */ - aip->removable = 0; - aip->old_atari_disk = 1; - } - - /******************/ - /* We've done it. */ - /******************/ - - return DEV_SUPPORTED; -} - -EXPORT_SYMBOL(acsi_delay_start); -EXPORT_SYMBOL(acsi_delay_end); -EXPORT_SYMBOL(acsi_wait_for_IRQ); -EXPORT_SYMBOL(acsi_wait_for_noIRQ); -EXPORT_SYMBOL(acsicmd_nodma); -EXPORT_SYMBOL(acsi_getstatus); -EXPORT_SYMBOL(acsi_buffer); -EXPORT_SYMBOL(phys_acsi_buffer); - -#ifdef CONFIG_ATARI_SLM_MODULE -void acsi_attach_SLMs( int (*attach_func)( int, int ) ); - -EXPORT_SYMBOL(acsi_extstatus); -EXPORT_SYMBOL(acsi_end_extstatus); -EXPORT_SYMBOL(acsi_extcmd); -EXPORT_SYMBOL(acsi_attach_SLMs); - -/* to remember IDs of SLM devices, SLM module is loaded later - * (index is target#, contents is lun#, -1 means "no SLM") */ -int SLM_devices[8]; -#endif - -static struct block_device_operations acsi_fops = { - .owner = THIS_MODULE, - .open = acsi_open, - .release = acsi_release, - .ioctl = acsi_ioctl, - .getgeo = acsi_getgeo, - .media_changed = acsi_media_change, - .revalidate_disk= acsi_revalidate, -}; - -#ifdef CONFIG_ATARI_SLM_MODULE -/* call attach_slm() for each device that is a printer; needed for init of SLM - * driver as a module, since it's not yet present if acsi.c is inited and thus - * the bus gets scanned. */ -void acsi_attach_SLMs( int (*attach_func)( int, int ) ) -{ - int i, n = 0; - - for( i = 0; i < 8; ++i ) - if (SLM_devices[i] >= 0) - n += (*attach_func)( i, SLM_devices[i] ); - printk( KERN_INFO "Found %d SLM printer(s) total.\n", n ); -} -#endif /* CONFIG_ATARI_SLM_MODULE */ - - -int acsi_init( void ) -{ - int err = 0; - int i, target, lun; - struct acsi_info_struct *aip; -#ifdef CONFIG_ATARI_SLM - int n_slm = 0; -#endif - if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ACSI)) - return 0; - if (register_blkdev(ACSI_MAJOR, "ad")) { - err = -EBUSY; - goto out1; - } - if (!(acsi_buffer = - (char *)atari_stram_alloc(ACSI_BUFFER_SIZE, "acsi"))) { - err = -ENOMEM; - printk( KERN_ERR "Unable to get ACSI ST-Ram buffer.\n" ); - goto out2; - } - phys_acsi_buffer = virt_to_phys( acsi_buffer ); - STramMask = ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000 : 0xff000000; - - acsi_queue = blk_init_queue(do_acsi_request, &acsi_lock); - if (!acsi_queue) { - err = -ENOMEM; - goto out2a; - } -#ifdef CONFIG_ATARI_SLM - err = slm_init(); -#endif - if (err) - goto out3; - - printk( KERN_INFO "Probing ACSI devices:\n" ); - NDevices = 0; -#ifdef CONFIG_ATARI_SLM_MODULE - for( i = 0; i < 8; ++i ) - SLM_devices[i] = -1; -#endif - stdma_lock(NULL, NULL); - - for (target = 0; target < 8 && NDevices < MAX_DEV; ++target) { - lun = 0; - do { - aip = &acsi_info[NDevices]; - aip->type = NONE; - aip->target = target; - aip->lun = lun; - i = acsi_devinit(aip); - switch (i) { - case DEV_SUPPORTED: - printk( KERN_INFO "Detected "); - switch (aip->type) { - case HARDDISK: - printk("disk"); - break; - case CDROM: - printk("cdrom"); - break; - default: - } - printk(" ad%c at id %d lun %d ", - 'a' + NDevices, target, lun); - if (aip->removable) - printk("(removable) "); - if (aip->read_only) - printk("(read-only) "); - if (aip->size == DEFAULT_SIZE) - printk(" unkown size, using default "); - printk("%ld MByte\n", - (aip->size*512+1024*1024/2)/(1024*1024)); - NDevices++; - break; - case DEV_SLM: -#ifdef CONFIG_ATARI_SLM - n_slm += attach_slm( target, lun ); - break; -#endif -#ifdef CONFIG_ATARI_SLM_MODULE - SLM_devices[target] = lun; - break; -#endif - /* neither of the above: fall through to unknown device */ - case DEV_UNKNOWN: - printk( KERN_INFO "Detected unsupported device at " - "id %d lun %d\n", target, lun); - break; - } - } -#ifdef CONFIG_ACSI_MULTI_LUN - while (i != DEV_NONE && ++lun < MAX_LUN); -#else - while (0); -#endif - } - - /* reenable interrupt */ - ENABLE_IRQ(); - stdma_release(); - -#ifndef CONFIG_ATARI_SLM - printk( KERN_INFO "Found %d ACSI device(s) total.\n", NDevices ); -#else - printk( KERN_INFO "Found %d ACSI device(s) and %d SLM printer(s) total.\n", - NDevices, n_slm ); -#endif - err = -ENOMEM; - for( i = 0; i < NDevices; ++i ) { - acsi_gendisk[i] = alloc_disk(16); - if (!acsi_gendisk[i]) - goto out4; - } - - for( i = 0; i < NDevices; ++i ) { - struct gendisk *disk = acsi_gendisk[i]; - sprintf(disk->disk_name, "ad%c", 'a'+i); - aip = &acsi_info[NDevices]; - disk->major = ACSI_MAJOR; - disk->first_minor = i << 4; - if (acsi_info[i].type != HARDDISK) - disk->minors = 1; - disk->fops = &acsi_fops; - disk->private_data = &acsi_info[i]; - set_capacity(disk, acsi_info[i].size); - disk->queue = acsi_queue; - add_disk(disk); - } - return 0; -out4: - while (i--) - put_disk(acsi_gendisk[i]); -out3: - blk_cleanup_queue(acsi_queue); -out2a: - atari_stram_free( acsi_buffer ); -out2: - unregister_blkdev( ACSI_MAJOR, "ad" ); -out1: - return err; -} - - -#ifdef MODULE - -MODULE_LICENSE("GPL"); - -int init_module(void) -{ - int err; - - if ((err = acsi_init())) - return( err ); - printk( KERN_INFO "ACSI driver loaded as module.\n"); - return( 0 ); -} - -void cleanup_module(void) -{ - int i; - del_timer( &acsi_timer ); - blk_cleanup_queue(acsi_queue); - atari_stram_free( acsi_buffer ); - - if (unregister_blkdev( ACSI_MAJOR, "ad" ) != 0) - printk( KERN_ERR "acsi: cleanup_module failed\n"); - - for (i = 0; i < NDevices; i++) { - del_gendisk(acsi_gendisk[i]); - put_disk(acsi_gendisk[i]); - } -} -#endif - -/* - * This routine is called to flush all partitions and partition tables - * for a changed scsi disk, and then re-read the new partition table. - * If we are revalidating a disk because of a media change, then we - * enter with usage == 0. If we are using an ioctl, we automatically have - * usage == 1 (we need an open channel to use an ioctl :-), so this - * is our limit. - * - * Changes by Martin Rogge, 9th Aug 1995: - * got cd-roms to work by calling acsi_devinit. There are only two problems: - * First, if there is no medium inserted, the status will remain "changed". - * That is no problem at all, but our design of three-valued logic (medium - * changed, medium not changed, no medium inserted). - * Secondly the check could fail completely and the drive could deliver - * nonsensical data, which could mess up the acsi_info[] structure. In - * that case we try to make the entry safe. - * - */ - -static int acsi_revalidate(struct gendisk *disk) -{ - struct acsi_info_struct *aip = disk->private_data; - stdma_lock( NULL, NULL ); - if (acsi_devinit(aip) != DEV_SUPPORTED) { - printk( KERN_ERR "ACSI: revalidate failed for target %d lun %d\n", - aip->target, aip->lun); - aip->size = 0; - aip->read_only = 1; - aip->removable = 1; - aip->changed = 1; /* next acsi_open will try again... */ - } - - ENABLE_IRQ(); - stdma_release(); - set_capacity(disk, aip->size); - return 0; -} diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 27a139025ce..6ce8b897e26 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1363,7 +1363,7 @@ static void redo_fd_request(void) #ifdef DEBUG printk("fd: sector %ld + %d requested for %s\n", CURRENT->sector,cnt, - (CURRENT->cmd==READ)?"read":"write"); + (rq_data_dir(CURRENT) == READ) ? "read" : "write"); #endif block = CURRENT->sector + cnt; if ((int)block > floppy->blocks) { diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 5acc6c44aea..0fcad430474 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -87,6 +87,7 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -119,6 +120,7 @@ static struct board_type products[] = { {0x3214103C, "Smart Array E200i", &SA5_access, 120}, {0x3215103C, "Smart Array E200i", &SA5_access, 120}, {0x3237103C, "Smart Array E500", &SA5_access, 512}, + {0x323D103C, "Smart Array P700m", &SA5_access, 512}, {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, }; diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 069ae39a9cd..c575fb1d585 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -416,7 +416,7 @@ static void nbd_clear_que(struct nbd_device *lo) /* * We always wait for result of write, for now. It would be nice to make it optional * in future - * if ((req->cmd == WRITE) && (lo->flags & NBD_WRITE_NOCHK)) + * if ((rq_data_dir(req) == WRITE) && (lo->flags & NBD_WRITE_NOCHK)) * { printk( "Warning: Ignoring result!\n"); nbd_end_request( req ); } */ |