diff options
Diffstat (limited to 'drivers/block')
| -rw-r--r-- | drivers/block/cciss.c | 14 | ||||
| -rw-r--r-- | drivers/block/cciss_scsi.c | 85 |
2 files changed, 90 insertions, 9 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 8d0f8932fee..cb43fb3af15 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1974,6 +1974,13 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Request.CDB[0] = BMIC_WRITE; c->Request.CDB[6] = BMIC_CACHE_FLUSH; break; + case TEST_UNIT_READY: + memcpy(c->Header. LUN.LunAddrBytes, scsi3addr, 8); + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; + break; default: printk(KERN_WARNING "cciss%d: Unknown Command 0x%c\n", ctlr, cmd); @@ -1992,13 +1999,14 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ memcpy(&c->Request.CDB[4], buff, 8); break; case 1: /* RESET message */ - c->Request.CDBLen = 12; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); + c->Request.CDBLen = 16; c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_WRITE; + c->Request.Type.Direction = XFER_NONE; c->Request.Timeout = 0; memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); c->Request.CDB[0] = cmd; /* reset */ - c->Request.CDB[1] = 0x04; /* reset a LUN */ + c->Request.CDB[1] = 0x03; /* reset a target */ break; case 3: /* No-Op message */ c->Request.CDBLen = 1; diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index a3fd87b4144..8575c48c891 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -58,6 +58,18 @@ static int sendcmd( unsigned char *scsi3addr, int cmd_type); +static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, + size_t size, + unsigned int use_unit_num, /* 0: address the controller, + 1: address logical volume log_unit, + 2: periph device address is scsi3addr */ + unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr, + int cmd_type); + +static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c); + +static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool); +static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool); static int cciss_scsi_proc_info( struct Scsi_Host *sh, @@ -1575,6 +1587,68 @@ cciss_seq_tape_report(struct seq_file *seq, int ctlr) CPQ_TAPE_UNLOCK(ctlr, flags); } +static int wait_for_device_to_become_ready(ctlr_info_t *h, + unsigned char lunaddr[]) +{ + int rc; + int count = 0; + int waittime = HZ; + CommandList_struct *c; + + c = cmd_alloc(h, 1); + if (!c) { + printk(KERN_WARNING "cciss%d: out of memory in " + "wait_for_device_to_become_ready.\n", h->ctlr); + return IO_ERROR; + } + + /* Send test unit ready until device ready, or give up. */ + while (count < 20) { + + /* Wait for a bit. do this first, because if we send + * the TUR right away, the reset will just abort it. + */ + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(waittime); + count++; + + /* Increase wait time with each try, up to a point. */ + if (waittime < (HZ * 30)) + waittime = waittime * 2; + + /* Send the Test Unit Ready */ + rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0, 0, 0, + lunaddr, TYPE_CMD); + if (rc == 0) { + rc = sendcmd_core(h, c); + /* sendcmd turned off interrupts, turn 'em back on. */ + h->access.set_intr_mask(h, CCISS_INTR_ON); + } + + if (rc == 0 && c->err_info->CommandStatus == CMD_SUCCESS) + break; + + if (rc == 0 && + c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && + (c->err_info->SenseInfo[2] == NO_SENSE || + c->err_info->SenseInfo[2] == UNIT_ATTENTION)) + break; + + printk(KERN_WARNING "cciss%d: Waiting %d secs " + "for device to become ready.\n", + h->ctlr, waittime / HZ); + rc = 1; /* device not ready. */ + } + + if (rc) + printk("cciss%d: giving up on device.\n", h->ctlr); + else + printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr); + + cmd_free(h, c, 1); + return rc; +} /* Need at least one of these error handlers to keep ../scsi/hosts.c from * complaining. Doing a host- or bus-reset can't do anything good here. @@ -1591,6 +1665,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) { int rc; CommandList_struct *cmd_in_trouble; + unsigned char lunaddr[8]; ctlr_info_t **c; int ctlr; @@ -1600,19 +1675,17 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) return FAILED; ctlr = (*c)->ctlr; printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr); - /* find the command that's giving us trouble */ cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble; - if (cmd_in_trouble == NULL) { /* paranoia */ + if (cmd_in_trouble == NULL) /* paranoia */ return FAILED; - } + memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8); /* send a reset to the SCSI LUN which the command was sent to */ - rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, - (unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0], + rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, lunaddr, TYPE_MSG); /* sendcmd turned off interrupts on the board, turn 'em back on. */ (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); - if (rc == 0) + if (rc == 0 && wait_for_device_to_become_ready(*c, lunaddr) == 0) return SUCCESS; printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr); return FAILED; |