aboutsummaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/Kconfig29
-rw-r--r--drivers/block/cciss.c37
-rw-r--r--drivers/block/cpqarray.c7
-rw-r--r--drivers/block/floppy.c2
-rw-r--r--drivers/block/pktcdvd.c6
-rw-r--r--drivers/block/ub.c20
-rw-r--r--drivers/block/xen-blkfront.c8
-rw-r--r--drivers/block/xsysace.c23
8 files changed, 94 insertions, 38 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 61ad8d639ba..0344a8a8321 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -21,7 +21,8 @@ config BLK_DEV_FD
---help---
If you want to use the floppy disk drive(s) of your PC under Linux,
say Y. Information about this driver, especially important for IBM
- Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+ Thinkpad users, is contained in
+ <file:Documentation/blockdev/floppy.txt>.
That file also contains the location of the Floppy driver FAQ as
well as location of the fdutils package used to configure additional
parameters of the driver at run time.
@@ -76,7 +77,7 @@ config PARIDE
your computer's parallel port. Most of them are actually IDE devices
using a parallel port IDE adapter. This option enables the PARIDE
subsystem which contains drivers for many of these external drives.
- Read <file:Documentation/paride.txt> for more information.
+ Read <file:Documentation/blockdev/paride.txt> for more information.
If you have said Y to the "Parallel-port support" configuration
option, you may share a single port between your printer and other
@@ -114,9 +115,9 @@ config BLK_CPQ_DA
help
This is the driver for Compaq Smart Array controllers. Everyone
using these boards should say Y here. See the file
- <file:Documentation/cpqarray.txt> for the current list of boards
- supported by this driver, and for further information on the use of
- this driver.
+ <file:Documentation/blockdev/cpqarray.txt> for the current list of
+ boards supported by this driver, and for further information on the
+ use of this driver.
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
@@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA
help
This is the driver for Compaq Smart Array 5xxx controllers.
Everyone using these boards should say Y here.
- See <file:Documentation/cciss.txt> for the current list of
+ See <file:Documentation/blockdev/cciss.txt> for the current list of
boards supported by this driver, and for further information
on the use of this driver.
@@ -135,7 +136,7 @@ config CISS_SCSI_TAPE
help
When enabled (Y), this option allows SCSI tape drives and SCSI medium
changers (tape robots) to be accessed via a Compaq 5xxx array
- controller. (See <file:Documentation/cciss.txt> for more details.)
+ controller. (See <file:Documentation/blockdev/cciss.txt> for more details.)
"SCSI support" and "SCSI tape support" must also be enabled for this
option to work.
@@ -149,8 +150,8 @@ config BLK_DEV_DAC960
help
This driver adds support for the Mylex DAC960, AcceleRAID, and
eXtremeRAID PCI RAID controllers. See the file
- <file:Documentation/README.DAC960> for further information about
- this driver.
+ <file:Documentation/blockdev/README.DAC960> for further information
+ about this driver.
To compile this driver as a module, choose M here: the
module will be called DAC960.
@@ -278,9 +279,9 @@ config BLK_DEV_NBD
userland (making server and client physically the same computer,
communicating using the loopback network device).
- Read <file:Documentation/nbd.txt> for more information, especially
- about where to find the server code, which runs in user space and
- does not need special kernel support.
+ Read <file:Documentation/blockdev/nbd.txt> for more information,
+ especially about where to find the server code, which runs in user
+ space and does not need special kernel support.
Note that this has nothing to do with the network file systems NFS
or Coda; you can say N here even if you intend to use NFS or Coda.
@@ -321,8 +322,8 @@ config BLK_DEV_RAM
store a copy of a minimal root file system off of a floppy into RAM
during the initial install of Linux.
- Note that the kernel command line option "ramdisk=XX" is now
- obsolete. For details, read <file:Documentation/ramdisk.txt>.
+ Note that the kernel command line option "ramdisk=XX" is now obsolete.
+ For details, read <file:Documentation/blockdev/ramdisk.txt>.
To compile this driver as a module, choose M here: the
module will be called rd.
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 4023885353e..9364dc55425 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -96,6 +96,8 @@ static const struct pci_device_id cciss_pci_device_id[] = {
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
@@ -133,6 +135,8 @@ static struct board_type products[] = {
{0x3245103C, "Smart Array P410i", &SA5_access},
{0x3247103C, "Smart Array P411", &SA5_access},
{0x3249103C, "Smart Array P812", &SA5_access},
+ {0x324A103C, "Smart Array P712m", &SA5_access},
+ {0x324B103C, "Smart Array P711m", &SA5_access},
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
@@ -1366,6 +1370,7 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
disk->first_minor = drv_index << NWD_SHIFT;
disk->fops = &cciss_fops;
disk->private_data = &h->drv[drv_index];
+ disk->driverfs_dev = &h->pdev->dev;
/* Set up queue information */
blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
@@ -2842,7 +2847,7 @@ static void do_cciss_request(struct request_queue *q)
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
+ printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
creq->nr_sectors, seg);
#endif /* CCISS_DEBUG */
@@ -3192,7 +3197,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
#ifdef CCISS_DEBUG
- printk("address 0 = %x\n", c->paddr);
+ printk("address 0 = %lx\n", c->paddr);
#endif /* CCISS_DEBUG */
c->vaddr = remap_pci_mem(c->paddr, 0x250);
@@ -3219,7 +3224,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
#endif /* CCISS_DEBUG */
cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
#ifdef CCISS_DEBUG
- printk("cfg base address index = %x\n", cfg_base_addr_index);
+ printk("cfg base address index = %llx\n",
+ (unsigned long long)cfg_base_addr_index);
#endif /* CCISS_DEBUG */
if (cfg_base_addr_index == -1) {
printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
@@ -3229,7 +3235,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
#ifdef CCISS_DEBUG
- printk("cfg offset = %x\n", cfg_offset);
+ printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
#endif /* CCISS_DEBUG */
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
@@ -3404,7 +3410,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
int i;
int j = 0;
int rc;
- int dac;
+ int dac, return_code;
+ InquiryData_struct *inq_buff = NULL;
i = alloc_cciss_hba();
if (i < 0)
@@ -3510,6 +3517,25 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
/* Turn the interrupts on so we can service requests */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
+ /* Get the firmware version */
+ inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ if (inq_buff == NULL) {
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto clean4;
+ }
+
+ return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
+ sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD);
+ if (return_code == IO_OK) {
+ hba[i]->firm_ver[0] = inq_buff->data_byte[32];
+ hba[i]->firm_ver[1] = inq_buff->data_byte[33];
+ hba[i]->firm_ver[2] = inq_buff->data_byte[34];
+ hba[i]->firm_ver[3] = inq_buff->data_byte[35];
+ } else { /* send command failed */
+ printk(KERN_WARNING "cciss: unable to determine firmware"
+ " version of controller\n");
+ }
+
cciss_procinit(i);
hba[i]->cciss_max_sectors = 2048;
@@ -3520,6 +3546,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
return 1;
clean4:
+ kfree(inq_buff);
#ifdef CONFIG_CISS_SCSI_TAPE
kfree(hba[i]->scsi_rejects.complete);
#endif
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 47d233c6d0b..5d39df14ed9 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -567,7 +567,12 @@ static int __init cpqarray_init(void)
num_cntlrs_reg++;
}
- return(num_cntlrs_reg);
+ if (num_cntlrs_reg)
+ return 0;
+ else {
+ pci_unregister_driver(&cpqarray_pci_driver);
+ return -ENODEV;
+ }
}
/* Function to find the first free pointer into our hba[] array */
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 14db747a636..cf29cc4e6ab 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str)
printk("\n");
} else
DPRINT("botched floppy option\n");
- DPRINT("Read Documentation/floppy.txt\n");
+ DPRINT("Read Documentation/blockdev/floppy.txt\n");
return 0;
}
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index f20bf359b84..dc7a8c352da 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = {
static void pkt_sysfs_dev_new(struct pktcdvd_device *pd)
{
if (class_pktcdvd) {
- pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL,
+ pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL,
"%s", pd->name);
if (IS_ERR(pd->dev))
pd->dev = NULL;
@@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
return 0;
out_mem:
- blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
return ret;
@@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev)
pkt_debugfs_dev_remove(pd);
pkt_sysfs_dev_remove(pd);
- blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
remove_proc_entry(pd->name, pkt_proc);
DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index fccac18d311..048d71d244d 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
/*
* Reset management
- * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
- * XXX Make usb_sync_reset asynchronous.
*/
static void ub_reset_enter(struct ub_dev *sc, int try)
@@ -1633,6 +1631,22 @@ static void ub_reset_task(struct work_struct *work)
}
/*
+ * XXX Reset brackets are too much hassle to implement, so just stub them
+ * in order to prevent forced unbinding (which deadlocks solid when our
+ * ->disconnect method waits for the reset to complete and this kills keventd).
+ *
+ * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device,
+ * or else the post_reset is invoked, and restats I/O on a locked device.
+ */
+static int ub_pre_reset(struct usb_interface *iface) {
+ return 0;
+}
+
+static int ub_post_reset(struct usb_interface *iface) {
+ return 0;
+}
+
+/*
* This is called from a process context.
*/
static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
@@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = {
.probe = ub_probe,
.disconnect = ub_disconnect,
.id_table = ub_usb_ids,
+ .pre_reset = ub_pre_reset,
+ .post_reset = ub_post_reset,
};
static int __init ub_init(void)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b220c686089..2d19f0cc47f 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -338,12 +338,18 @@ wait:
static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
{
struct request_queue *rq;
+ elevator_t *old_e;
rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
if (rq == NULL)
return -1;
- elevator_init(rq, "noop");
+ old_e = rq->elevator;
+ if (IS_ERR_VALUE(elevator_init(rq, "noop")))
+ printk(KERN_WARNING
+ "blkfront: Switch elevator failed, use default\n");
+ else
+ elevator_exit(old_e);
/* Hard sector size and max sectors impersonate the equiv. hardware. */
blk_queue_hardsect_size(rq, sector_size);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ecab9e67d47..29e1dfafb7c 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -194,7 +194,7 @@ struct ace_device {
int in_irq;
/* Details of hardware device */
- unsigned long physaddr;
+ resource_size_t physaddr;
void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
@@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
- req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
@@ -935,7 +935,8 @@ static int __devinit ace_setup(struct ace_device *ace)
int rc;
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
- dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+ (unsigned long long)ace->physaddr, ace->irq);
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
@@ -1017,8 +1018,8 @@ static int __devinit ace_setup(struct ace_device *ace)
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
- dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
- ace->physaddr, ace->baseaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+ (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
ace->media_change = 1;
ace_revalidate_disk(ace->gd);
@@ -1035,8 +1036,8 @@ err_alloc_disk:
err_blk_initq:
iounmap(ace->baseaddr);
err_ioremap:
- dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
- ace->physaddr);
+ dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+ (unsigned long long) ace->physaddr);
return -ENOMEM;
}
@@ -1059,7 +1060,7 @@ static void __devexit ace_teardown(struct ace_device *ace)
}
static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
int irq, int bus_width)
{
struct ace_device *ace;
@@ -1119,7 +1120,7 @@ static void __devexit ace_free(struct device *dev)
static int __devinit ace_probe(struct platform_device *dev)
{
- unsigned long physaddr = 0;
+ resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
@@ -1165,7 +1166,7 @@ static int __devinit
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
- unsigned long physaddr;
+ resource_size_t physaddr;
const u32 *id;
int irq, bus_width, rc;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 09:03:41 +0000