5 files changed, 57 insertions, 45 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 93d94749310..b5382cedf0c 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -400,6 +400,16 @@ config BLK_DEV_RAM_SIZE
 	  what are you doing. If you are using IBM S/390, then set this to
 	  8192.
 
+config BLK_DEV_RAM_BLOCKSIZE
+	int "Default RAM disk block size (bytes)"
+	depends on BLK_DEV_RAM
+	default "1024"
+	help
+	  The default value is 1024 kilobytes.  PAGE_SIZE is a much more
+	  efficient choice however.  The default is kept to ensure initrd
+	  setups function - apparently needed by the rd_load_image routine
+	  that supposes the filesystem in the image uses a 1024 blocksize.
+
 config BLK_DEV_INITRD
 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
 	depends on BROKEN || !FRV
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 5327f553b4f..1bc1cf9603f 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -162,7 +162,7 @@ aoechr_open(struct inode *inode, struct file *filp)
 {
 	int n, i;
 
-	n = MINOR(inode->i_rdev);
+	n = iminor(inode);
 	filp->private_data = (void *) (unsigned long) n;
 
 	for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 1c4df22dfd2..7b0eca703a6 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1233,6 +1233,50 @@ static inline void complete_buffers(struct bio *bio, int status)
 	}
 }
 
+static void cciss_check_queues(ctlr_info_t *h)
+{
+	int start_queue = h->next_to_run;
+	int i;
+
+	/* check to see if we have maxed out the number of commands that can
+	 * be placed on the queue.  If so then exit.  We do this check here
+	 * in case the interrupt we serviced was from an ioctl and did not
+	 * free any new commands.
+	 */
+	if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
+		return;
+
+	/* We have room on the queue for more commands.  Now we need to queue
+	 * them up.  We will also keep track of the next queue to run so
+	 * that every queue gets a chance to be started first.
+	 */
+	for (i = 0; i < h->highest_lun + 1; i++) {
+		int curr_queue = (start_queue + i) % (h->highest_lun + 1);
+		/* make sure the disk has been added and the drive is real
+		 * because this can be called from the middle of init_one.
+		 */
+		if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
+			continue;
+		blk_start_queue(h->gendisk[curr_queue]->queue);
+
+		/* check to see if we have maxed out the number of commands
+		 * that can be placed on the queue.
+		 */
+		if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) {
+			if (curr_queue == start_queue) {
+				h->next_to_run =
+				    (start_queue + 1) % (h->highest_lun + 1);
+				break;
+			} else {
+				h->next_to_run = curr_queue;
+				break;
+			}
+		} else {
+			curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
+		}
+	}
+}
+
 static void cciss_softirq_done(struct request *rq)
 {
 	CommandList_struct *cmd = rq->completion_data;
@@ -1264,6 +1308,7 @@ static void cciss_softirq_done(struct request *rq)
 	spin_lock_irqsave(&h->lock, flags);
 	end_that_request_last(rq, rq->errors);
 	cmd_free(h, cmd, 1);
+	cciss_check_queues(h);
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
@@ -2528,8 +2573,6 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
 	CommandList_struct *c;
 	unsigned long flags;
 	__u32 a, a1, a2;
-	int j;
-	int start_queue = h->next_to_run;
 
 	if (interrupt_not_for_us(h))
 		return IRQ_NONE;
@@ -2588,45 +2631,6 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
 
-	/* check to see if we have maxed out the number of commands that can
-	 * be placed on the queue.  If so then exit.  We do this check here
-	 * in case the interrupt we serviced was from an ioctl and did not
-	 * free any new commands.
-	 */
-	if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
-		goto cleanup;
-
-	/* We have room on the queue for more commands.  Now we need to queue
-	 * them up.  We will also keep track of the next queue to run so
-	 * that every queue gets a chance to be started first.
-	 */
-	for (j = 0; j < h->highest_lun + 1; j++) {
-		int curr_queue = (start_queue + j) % (h->highest_lun + 1);
-		/* make sure the disk has been added and the drive is real
-		 * because this can be called from the middle of init_one.
-		 */
-		if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
-			continue;
-		blk_start_queue(h->gendisk[curr_queue]->queue);
-
-		/* check to see if we have maxed out the number of commands
-		 * that can be placed on the queue.
-		 */
-		if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) {
-			if (curr_queue == start_queue) {
-				h->next_to_run =
-				    (start_queue + 1) % (h->highest_lun + 1);
-				goto cleanup;
-			} else {
-				h->next_to_run = curr_queue;
-				goto cleanup;
-			}
-		} else {
-			curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
-		}
-	}
-
-      cleanup:
 	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 	return IRQ_HANDLED;
 }
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 757f42dd8e8..78082edc14b 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -1739,8 +1739,6 @@ static void getgeometry(int ctlr)
 	     (log_index < id_ctlr_buf->nr_drvs)
 	     && (log_unit < NWD);
 	     log_unit++) {
-		struct gendisk *disk = ida_gendisk[ctlr][log_unit];
-
 		size = sizeof(sense_log_drv_stat_t);
 
 		/*
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 3cf246abb5e..a3f64bfe6b5 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -84,7 +84,7 @@ int rd_size = CONFIG_BLK_DEV_RAM_SIZE;		/* Size of the RAM disks */
  * behaviour. The default is still BLOCK_SIZE (needed by rd_load_image that
  * supposes the filesystem in the image uses a BLOCK_SIZE blocksize).
  */
-static int rd_blocksize = BLOCK_SIZE;		/* blocksize of the RAM disks */
+static int rd_blocksize = CONFIG_BLK_DEV_RAM_BLOCKSIZE;
 
 /*
  * Copyright (C) 2000 Linus Torvalds.