diff options
Diffstat (limited to 'drivers/char/drm/i915_drv.h')
| -rw-r--r-- | drivers/char/drm/i915_drv.h | 1142 |
1 files changed, 0 insertions, 1142 deletions
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h deleted file mode 100644 index d7326d92a23..00000000000 --- a/drivers/char/drm/i915_drv.h +++ /dev/null @@ -1,1142 +0,0 @@ -/* i915_drv.h -- Private header for the I915 driver -*- linux-c -*- - */ -/* - * - * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sub license, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. - * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR - * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -#ifndef _I915_DRV_H_ -#define _I915_DRV_H_ - -/* General customization: - */ - -#define DRIVER_AUTHOR "Tungsten Graphics, Inc." - -#define DRIVER_NAME "i915" -#define DRIVER_DESC "Intel Graphics" -#define DRIVER_DATE "20060119" - -/* Interface history: - * - * 1.1: Original. - * 1.2: Add Power Management - * 1.3: Add vblank support - * 1.4: Fix cmdbuffer path, add heap destroy - * 1.5: Add vblank pipe configuration - * 1.6: - New ioctl for scheduling buffer swaps on vertical blank - * - Support vertical blank on secondary display pipe - */ -#define DRIVER_MAJOR 1 -#define DRIVER_MINOR 6 -#define DRIVER_PATCHLEVEL 0 - -typedef struct _drm_i915_ring_buffer { - int tail_mask; - unsigned long Start; - unsigned long End; - unsigned long Size; - u8 *virtual_start; - int head; - int tail; - int space; - drm_local_map_t map; -} drm_i915_ring_buffer_t; - -struct mem_block { - struct mem_block *next; - struct mem_block *prev; - int start; - int size; - struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */ -}; - -typedef struct _drm_i915_vbl_swap { - struct list_head head; - drm_drawable_t drw_id; - unsigned int pipe; - unsigned int sequence; -} drm_i915_vbl_swap_t; - -typedef struct drm_i915_private { - drm_local_map_t *sarea; - drm_local_map_t *mmio_map; - - drm_i915_sarea_t *sarea_priv; - drm_i915_ring_buffer_t ring; - - drm_dma_handle_t *status_page_dmah; - void *hw_status_page; - dma_addr_t dma_status_page; - unsigned long counter; - unsigned int status_gfx_addr; - drm_local_map_t hws_map; - - unsigned int cpp; - int back_offset; - int front_offset; - int current_page; - int page_flipping; - int use_mi_batchbuffer_start; - - wait_queue_head_t irq_queue; - atomic_t irq_received; - atomic_t irq_emitted; - - int tex_lru_log_granularity; - int allow_batchbuffer; - struct mem_block *agp_heap; - unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds; - int vblank_pipe; - - spinlock_t swaps_lock; - drm_i915_vbl_swap_t vbl_swaps; - unsigned int swaps_pending; - - /* Register state */ - u8 saveLBB; - u32 saveDSPACNTR; - u32 saveDSPBCNTR; - u32 saveDSPARB; - u32 savePIPEACONF; - u32 savePIPEBCONF; - u32 savePIPEASRC; - u32 savePIPEBSRC; - u32 saveFPA0; - u32 saveFPA1; - u32 saveDPLL_A; - u32 saveDPLL_A_MD; - u32 saveHTOTAL_A; - u32 saveHBLANK_A; - u32 saveHSYNC_A; - u32 saveVTOTAL_A; - u32 saveVBLANK_A; - u32 saveVSYNC_A; - u32 saveBCLRPAT_A; - u32 savePIPEASTAT; - u32 saveDSPASTRIDE; - u32 saveDSPASIZE; - u32 saveDSPAPOS; - u32 saveDSPABASE; - u32 saveDSPASURF; - u32 saveDSPATILEOFF; - u32 savePFIT_PGM_RATIOS; - u32 saveBLC_PWM_CTL; - u32 saveBLC_PWM_CTL2; - u32 saveFPB0; - u32 saveFPB1; - u32 saveDPLL_B; - u32 saveDPLL_B_MD; - u32 saveHTOTAL_B; - u32 saveHBLANK_B; - u32 saveHSYNC_B; - u32 saveVTOTAL_B; - u32 saveVBLANK_B; - u32 saveVSYNC_B; - u32 saveBCLRPAT_B; - u32 savePIPEBSTAT; - u32 saveDSPBSTRIDE; - u32 saveDSPBSIZE; - u32 saveDSPBPOS; - u32 saveDSPBBASE; - u32 saveDSPBSURF; - u32 saveDSPBTILEOFF; - u32 saveVCLK_DIVISOR_VGA0; - u32 saveVCLK_DIVISOR_VGA1; - u32 saveVCLK_POST_DIV; - u32 saveVGACNTRL; - u32 saveADPA; - u32 saveLVDS; - u32 saveLVDSPP_ON; - u32 saveLVDSPP_OFF; - u32 saveDVOA; - u32 saveDVOB; - u32 saveDVOC; - u32 savePP_ON; - u32 savePP_OFF; - u32 savePP_CONTROL; - u32 savePP_CYCLE; - u32 savePFIT_CONTROL; - u32 save_palette_a[256]; - u32 save_palette_b[256]; - u32 saveFBC_CFB_BASE; - u32 saveFBC_LL_BASE; - u32 saveFBC_CONTROL; - u32 saveFBC_CONTROL2; - u32 saveIER; - u32 saveIIR; - u32 saveIMR; - u32 saveCACHE_MODE_0; - u32 saveD_STATE; - u32 saveDSPCLK_GATE_D; - u32 saveMI_ARB_STATE; - u32 saveSWF0[16]; - u32 saveSWF1[16]; - u32 saveSWF2[3]; - u8 saveMSR; - u8 saveSR[8]; - u8 saveGR[25]; - u8 saveAR_INDEX; - u8 saveAR[21]; - u8 saveDACMASK; - u8 saveDACDATA[256*3]; /* 256 3-byte colors */ - u8 saveCR[37]; -} drm_i915_private_t; - -extern struct drm_ioctl_desc i915_ioctls[]; -extern int i915_max_ioctl; - - /* i915_dma.c */ -extern void i915_kernel_lost_context(struct drm_device * dev); -extern int i915_driver_load(struct drm_device *, unsigned long flags); -extern int i915_driver_unload(struct drm_device *); -extern void i915_driver_lastclose(struct drm_device * dev); -extern void i915_driver_preclose(struct drm_device *dev, - struct drm_file *file_priv); -extern int i915_driver_device_is_agp(struct drm_device * dev); -extern long i915_compat_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg); - -/* i915_irq.c */ -extern int i915_irq_emit(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern int i915_irq_wait(struct drm_device *dev, void *data, - struct drm_file *file_priv); - -extern int i915_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence); -extern int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence); -extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); -extern void i915_driver_irq_preinstall(struct drm_device * dev); -extern void i915_driver_irq_postinstall(struct drm_device * dev); -extern void i915_driver_irq_uninstall(struct drm_device * dev); -extern int i915_vblank_pipe_set(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern int i915_vblank_pipe_get(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern int i915_vblank_swap(struct drm_device *dev, void *data, - struct drm_file *file_priv); - -/* i915_mem.c */ -extern int i915_mem_alloc(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern int i915_mem_free(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern int i915_mem_init_heap(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern int i915_mem_destroy_heap(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern void i915_mem_takedown(struct mem_block **heap); -extern void i915_mem_release(struct drm_device * dev, - struct drm_file *file_priv, struct mem_block *heap); - -#define I915_READ(reg) DRM_READ32(dev_priv->mmio_map, (reg)) -#define I915_WRITE(reg,val) DRM_WRITE32(dev_priv->mmio_map, (reg), (val)) -#define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg)) -#define I915_WRITE16(reg,val) DRM_WRITE16(dev_priv->mmio_map, (reg), (val)) - -#define I915_VERBOSE 0 - -#define RING_LOCALS unsigned int outring, ringmask, outcount; \ - volatile char *virt; - -#define BEGIN_LP_RING(n) do { \ - if (I915_VERBOSE) \ - DRM_DEBUG("BEGIN_LP_RING(%d)\n", (n)); \ - if (dev_priv->ring.space < (n)*4) \ - i915_wait_ring(dev, (n)*4, __func__); \ - outcount = 0; \ - outring = dev_priv->ring.tail; \ - ringmask = dev_priv->ring.tail_mask; \ - virt = dev_priv->ring.virtual_start; \ -} while (0) - -#define OUT_RING(n) do { \ - if (I915_VERBOSE) DRM_DEBUG(" OUT_RING %x\n", (int)(n)); \ - *(volatile unsigned int *)(virt + outring) = (n); \ - outcount++; \ - outring += 4; \ - outring &= ringmask; \ -} while (0) - -#define ADVANCE_LP_RING() do { \ - if (I915_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING %x\n", outring); \ - dev_priv->ring.tail = outring; \ - dev_priv->ring.space -= outcount * 4; \ - I915_WRITE(LP_RING + RING_TAIL, outring); \ -} while(0) - -extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); - -/* Extended config space */ -#define LBB 0xf4 - -/* VGA stuff */ - -#define VGA_ST01_MDA 0x3ba -#define VGA_ST01_CGA 0x3da - -#define VGA_MSR_WRITE 0x3c2 -#define VGA_MSR_READ 0x3cc -#define VGA_MSR_MEM_EN (1<<1) -#define VGA_MSR_CGA_MODE (1<<0) - -#define VGA_SR_INDEX 0x3c4 -#define VGA_SR_DATA 0x3c5 - -#define VGA_AR_INDEX 0x3c0 -#define VGA_AR_VID_EN (1<<5) -#define VGA_AR_DATA_WRITE 0x3c0 -#define VGA_AR_DATA_READ 0x3c1 - -#define VGA_GR_INDEX 0x3ce -#define VGA_GR_DATA 0x3cf -/* GR05 */ -#define VGA_GR_MEM_READ_MODE_SHIFT 3 -#define VGA_GR_MEM_READ_MODE_PLANE 1 -/* GR06 */ -#define VGA_GR_MEM_MODE_MASK 0xc -#define VGA_GR_MEM_MODE_SHIFT 2 -#define VGA_GR_MEM_A0000_AFFFF 0 -#define VGA_GR_MEM_A0000_BFFFF 1 -#define VGA_GR_MEM_B0000_B7FFF 2 -#define VGA_GR_MEM_B0000_BFFFF 3 - -#define VGA_DACMASK 0x3c6 -#define VGA_DACRX 0x3c7 -#define VGA_DACWX 0x3c8 -#define VGA_DACDATA 0x3c9 - -#define VGA_CR_INDEX_MDA 0x3b4 -#define VGA_CR_DATA_MDA 0x3b5 -#define VGA_CR_INDEX_CGA 0x3d4 -#define VGA_CR_DATA_CGA 0x3d5 - -#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) -#define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) -#define CMD_REPORT_HEAD (7<<23) -#define CMD_STORE_DWORD_IDX ((0x21<<23) | 0x1) -#define CMD_OP_BATCH_BUFFER ((0x0<<29)|(0x30<<23)|0x1) - -#define INST_PARSER_CLIENT 0x00000000 -#define INST_OP_FLUSH 0x02000000 -#define INST_FLUSH_MAP_CACHE 0x00000001 - -#define BB1_START_ADDR_MASK (~0x7) -#define BB1_PROTECTED (1<<0) -#define BB1_UNPROTECTED (0<<0) -#define BB2_END_ADDR_MASK (~0x7) - -/* Framebuffer compression */ -#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ -#define FBC_LL_BASE 0x03204 /* 4k page aligned */ -#define FBC_CONTROL 0x03208 -#define FBC_CTL_EN (1<<31) -#define FBC_CTL_PERIODIC (1<<30) -#define FBC_CTL_INTERVAL_SHIFT (16) -#define FBC_CTL_UNCOMPRESSIBLE (1<<14) -#define FBC_CTL_STRIDE_SHIFT (5) -#define FBC_CTL_FENCENO (1<<0) -#define FBC_COMMAND 0x0320c -#define FBC_CMD_COMPRESS (1<<0) -#define FBC_STATUS 0x03210 -#define FBC_STAT_COMPRESSING (1<<31) -#define FBC_STAT_COMPRESSED (1<<30) -#define FBC_STAT_MODIFIED (1<<29) -#define FBC_STAT_CURRENT_LINE (1<<0) -#define FBC_CONTROL2 0x03214 -#define FBC_CTL_FENCE_DBL (0<<4) -#define FBC_CTL_IDLE_IMM (0<<2) -#define FBC_CTL_IDLE_FULL (1<<2) -#define FBC_CTL_IDLE_LINE (2<<2) -#define FBC_CTL_IDLE_DEBUG (3<<2) -#define FBC_CTL_CPU_FENCE (1<<1) -#define FBC_CTL_PLANEA (0<<0) -#define FBC_CTL_PLANEB (1<<0) -#define FBC_FENCE_OFF 0x0321b - -#define FBC_LL_SIZE (1536) -#define FBC_LL_PAD (32) - -/* Interrupt bits: - */ -#define USER_INT_FLAG (1<<1) -#define VSYNC_PIPEB_FLAG (1<<5) -#define VSYNC_PIPEA_FLAG (1<<7) -#define HWB_OOM_FLAG (1<<13) /* binner out of memory */ - -#define I915REG_HWSTAM 0x02098 -#define I915REG_INT_IDENTITY_R 0x020a4 -#define I915REG_INT_MASK_R 0x020a8 -#define I915REG_INT_ENABLE_R 0x020a0 - -#define I915REG_PIPEASTAT 0x70024 -#define I915REG_PIPEBSTAT 0x71024 - -#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) -#define I915_VBLANK_CLEAR (1UL<<1) - -#define SRX_INDEX 0x3c4 -#define SRX_DATA 0x3c5 -#define SR01 1 -#define SR01_SCREEN_OFF (1<<5) - -#define PPCR 0x61204 -#define PPCR_ON (1<<0) - -#define DVOB 0x61140 -#define DVOB_ON (1<<31) -#define DVOC 0x61160 -#define DVOC_ON (1<<31) -#define LVDS 0x61180 -#define LVDS_ON (1<<31) - -#define ADPA 0x61100 -#define ADPA_DPMS_MASK (~(3<<10)) -#define ADPA_DPMS_ON (0<<10) -#define ADPA_DPMS_SUSPEND (1<<10) -#define ADPA_DPMS_STANDBY (2<<10) -#define ADPA_DPMS_OFF (3<<10) - -#define NOPID 0x2094 -#define LP_RING 0x2030 -#define HP_RING 0x2040 -/* The binner has its own ring buffer: - */ -#define HWB_RING 0x2400 - -#define RING_TAIL 0x00 -#define TAIL_ADDR 0x001FFFF8 -#define RING_HEAD 0x04 -#define HEAD_WRAP_COUNT 0xFFE00000 -#define HEAD_WRAP_ONE 0x00200000 -#define HEAD_ADDR 0x001FFFFC -#define RING_START 0x08 -#define START_ADDR 0x0xFFFFF000 -#define RING_LEN 0x0C -#define RING_NR_PAGES 0x001FF000 -#define RING_REPORT_MASK 0x00000006 -#define RING_REPORT_64K 0x00000002 -#define RING_REPORT_128K 0x00000004 -#define RING_NO_REPORT 0x00000000 -#define RING_VALID_MASK 0x00000001 -#define RING_VALID 0x00000001 -#define RING_INVALID 0x00000000 - -/* Instruction parser error reg: - */ -#define IPEIR 0x2088 - -/* Scratch pad debug 0 reg: - */ -#define SCPD0 0x209c - -/* Error status reg: - */ -#define ESR 0x20b8 - -/* Secondary DMA fetch address debug reg: - */ -#define DMA_FADD_S 0x20d4 - -/* Memory Interface Arbitration State - */ -#define MI_ARB_STATE 0x20e4 - -/* Cache mode 0 reg. - * - Manipulating render cache behaviour is central - * to the concept of zone rendering, tuning this reg can help avoid - * unnecessary render cache reads and even writes (for z/stencil) - * at beginning and end of scene. - * - * - To change a bit, write to this reg with a mask bit set and the - * bit of interest either set or cleared. EG: (BIT<<16) | BIT to set. - */ -#define Cache_Mode_0 0x2120 -#define CACHE_MODE_0 0x2120 -#define CM0_MASK_SHIFT 16 -#define CM0_IZ_OPT_DISABLE (1<<6) -#define CM0_ZR_OPT_DISABLE (1<<5) -#define CM0_DEPTH_EVICT_DISABLE (1<<4) -#define CM0_COLOR_EVICT_DISABLE (1<<3) -#define CM0_DEPTH_WRITE_DISABLE (1<<1) -#define CM0_RC_OP_FLUSH_DISABLE (1<<0) - - -/* Graphics flush control. A CPU write flushes the GWB of all writes. - * The data is discarded. - */ -#define GFX_FLSH_CNTL 0x2170 - -/* Binner control. Defines the location of the bin pointer list: - */ -#define BINCTL 0x2420 -#define BC_MASK (1 << 9) - -/* Binned scene info. - */ -#define BINSCENE 0x2428 -#define BS_OP_LOAD (1 << 8) -#define BS_MASK (1 << 22) - -/* Bin command parser debug reg: - */ -#define BCPD 0x2480 - -/* Bin memory control debug reg: - */ -#define BMCD 0x2484 - -/* Bin data cache debug reg: - */ -#define BDCD 0x2488 - -/* Binner pointer cache debug reg: - */ -#define BPCD 0x248c - -/* Binner scratch pad debug reg: - */ -#define BINSKPD 0x24f0 - -/* HWB scratch pad debug reg: - */ -#define HWBSKPD 0x24f4 - -/* Binner memory pool reg: - */ -#define BMP_BUFFER 0x2430 -#define BMP_PAGE_SIZE_4K (0 << 10) -#define BMP_BUFFER_SIZE_SHIFT 1 -#define BMP_ENABLE (1 << 0) - -/* Get/put memory from the binner memory pool: - */ -#define BMP_GET 0x2438 -#define BMP_PUT 0x2440 -#define BMP_OFFSET_SHIFT 5 - -/* 3D state packets: - */ -#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) - -#define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define SC_UPDATE_SCISSOR (0x1<<1) -#define SC_ENABLE_MASK (0x1<<0) -#define SC_ENABLE (0x1<<0) - -#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) - -#define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) -#define SCI_YMIN_MASK (0xffff<<16) -#define SCI_XMIN_MASK (0xffff<<0) -#define SCI_YMAX_MASK (0xffff<<16) -#define SCI_XMAX_MASK (0xffff<<0) - -#define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) -#define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) -#define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) -#define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) -#define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) -#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) - -#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) - -#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) -#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) -#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) -#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) -#define XY_SRC_COPY_BLT_SRC_TILED (1<<15) -#define XY_SRC_COPY_BLT_DST_TILED (1<<11) - -#define MI_BATCH_BUFFER ((0x30<<23)|1) -#define MI_BATCH_BUFFER_START (0x31<<23) -#define MI_BATCH_BUFFER_END (0xA<<23) -#define MI_BATCH_NON_SECURE (1) -#define MI_BATCH_NON_SECURE_I965 (1<<8) - -#define MI_WAIT_FOR_EVENT ((0x3<<23)) -#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) -#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) -#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) - -#define MI_LOAD_SCAN_LINES_INCL ((0x12<<23)) - -#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) -#define ASYNC_FLIP (1<<22) -#define DISPLAY_PLANE_A (0<<20) -#define DISPLAY_PLANE_B (1<<20) - -/* Display regs */ -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DISPPLANE_SEL_PIPE_MASK (1<<24) - -/* Define the region of interest for the binner: - */ -#define CMD_OP_BIN_CONTROL ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4) - -#define CMD_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) - -#define CMD_MI_FLUSH (0x04 << 23) -#define MI_NO_WRITE_FLUSH (1 << 2) -#define MI_READ_FLUSH (1 << 0) -#define MI_EXE_FLUSH (1 << 1) -#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ -#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ - -#define BREADCRUMB_BITS 31 -#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1) - -#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) -#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) - -#define BLC_PWM_CTL 0x61254 -#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) - -#define BLC_PWM_CTL2 0x61250 -/** - * This is the most significant 15 bits of the number of backlight cycles in a - * complete cycle of the modulated backlight control. - * - * The actual value is this field multiplied by two. - */ -#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) -#define BLM_LEGACY_MODE (1 << 16) -/** - * This is the number of cycles out of the backlight modulation cycle for which - * the backlight is on. - * - * This field must be no greater than the number of cycles in the complete - * backlight modulation cycle. - */ -#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) -#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) - -#define I915_GCFGC 0xf0 -#define I915_LOW_FREQUENCY_ENABLE (1 << 7) -#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) -#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) -#define I915_DISPLAY_CLOCK_MASK (7 << 4) - -#define I855_HPLLCC 0xc0 -#define I855_CLOCK_CONTROL_MASK (3 << 0) -#define I855_CLOCK_133_200 (0 << 0) -#define I855_CLOCK_100_200 (1 << 0) -#define I855_CLOCK_100_133 (2 << 0) -#define I855_CLOCK_166_250 (3 << 0) - -/* p317, 319 - */ -#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ -#define VCLK2_VCO_N 0x600a -#define VCLK2_VCO_DIV_SEL 0x6012 - -#define VCLK_DIVISOR_VGA0 0x6000 -#define VCLK_DIVISOR_VGA1 0x6004 -#define VCLK_POST_DIV 0x6010 -/** Selects a post divisor of 4 instead of 2. */ -# define VGA1_PD_P2_DIV_4 (1 << 15) -/** Overrides the p2 post divisor field */ -# define VGA1_PD_P1_DIV_2 (1 << 13) -# define VGA1_PD_P1_SHIFT 8 -/** P1 value is 2 greater than this field */ -# define VGA1_PD_P1_MASK (0x1f << 8) -/** Selects a post divisor of 4 instead of 2. */ -# define VGA0_PD_P2_DIV_4 (1 << 7) -/** Overrides the p2 post divisor field */ -# define VGA0_PD_P1_DIV_2 (1 << 5) -# define VGA0_PD_P1_SHIFT 0 -/** P1 value is 2 greater than this field */ -# define VGA0_PD_P1_MASK (0x1f << 0) - -/* PCI D state control register */ -#define D_STATE 0x6104 -#define DSPCLK_GATE_D 0x6200 - -/* I830 CRTC registers */ -#define HTOTAL_A 0x60000 -#define HBLANK_A 0x60004 -#define HSYNC_A 0x60008 -#define VTOTAL_A 0x6000c -#define VBLANK_A 0x60010 -#define VSYNC_A 0x60014 -#define PIPEASRC 0x6001c -#define BCLRPAT_A 0x60020 -#define VSYNCSHIFT_A 0x60028 - -#define HTOTAL_B 0x61000 -#define HBLANK_B 0x61004 -#define HSYNC_B 0x61008 -#define VTOTAL_B 0x6100c -#define VBLANK_B 0x61010 -#define VSYNC_B 0x61014 -#define PIPEBSRC 0x6101c -#define BCLRPAT_B 0x61020 -#define VSYNCSHIFT_B 0x61028 - -#define PP_STATUS 0x61200 -# define PP_ON (1 << 31) -/** - * Indicates that all dependencies of the panel are on: - * - * - PLL enabled - * - pipe enabled - * - LVDS/DVOB/DVOC on - */ -# define PP_READY (1 << 30) -# define PP_SEQUENCE_NONE (0 << 28) -# define PP_SEQUENCE_ON (1 << 28) -# define PP_SEQUENCE_OFF (2 << 28) -# define PP_SEQUENCE_MASK 0x30000000 -#define PP_CONTROL 0x61204 -# define POWER_TARGET_ON (1 << 0) - -#define LVDSPP_ON 0x61208 -#define LVDSPP_OFF 0x6120c -#define PP_CYCLE 0x61210 - -#define PFIT_CONTROL 0x61230 -# define PFIT_ENABLE (1 << 31) -# define PFIT_PIPE_MASK (3 << 29) -# define PFIT_PIPE_SHIFT 29 -# define VERT_INTERP_DISABLE (0 << 10) -# define VERT_INTERP_BILINEAR (1 << 10) -# define VERT_INTERP_MASK (3 << 10) -# define VERT_AUTO_SCALE (1 << 9) -# define HORIZ_INTERP_DISABLE (0 << 6) -# define HORIZ_INTERP_BILINEAR (1 << 6) -# define HORIZ_INTERP_MASK (3 << 6) -# define HORIZ_AUTO_SCALE (1 << 5) -# define PANEL_8TO6_DITHER_ENABLE (1 << 3) - -#define PFIT_PGM_RATIOS 0x61234 -# define PFIT_VERT_SCALE_MASK 0xfff00000 -# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 - -#define PFIT_AUTO_RATIOS 0x61238 - - -#define DPLL_A 0x06014 -#define DPLL_B 0x06018 -# define DPLL_VCO_ENABLE (1 << 31) -# define DPLL_DVO_HIGH_SPEED (1 << 30) -# define DPLL_SYNCLOCK_ENABLE (1 << 29) -# define DPLL_VGA_MODE_DIS (1 << 28) -# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ -# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ -# define DPLL_MODE_MASK (3 << 26) -# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ -# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ -# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ -# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ -# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ -# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ -/** - * The i830 generation, in DAC/serial mode, defines p1 as two plus this - * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. - */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 -/** - * The i830 generation, in LVDS mode, defines P1 as the bit number set within - * this field (only one bit may be set). - */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 -# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 -# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ -# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ -# define PLL_REF_INPUT_DREFCLK (0 << 13) -# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ -# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ -# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) -# define PLL_REF_INPUT_MASK (3 << 13) -# define PLL_LOAD_PULSE_PHASE_SHIFT 9 -/* - * Parallel to Serial Load Pulse phase selection. - * Selects the phase for the 10X DPLL clock for the PCIe - * digital display port. The range is 4 to 13; 10 or more - * is just a flip delay. The default is 6 - */ -# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) -# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) - -/** - * SDVO multiplier for 945G/GM. Not used on 965. - * - * \sa DPLL_MD_UDI_MULTIPLIER_MASK - */ -# define SDVO_MULTIPLIER_MASK 0x000000ff -# define SDVO_MULTIPLIER_SHIFT_HIRES 4 -# define SDVO_MULTIPLIER_SHIFT_VGA 0 - -/** @defgroup DPLL_MD - * @{ - */ -/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_A_MD 0x0601c -/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_B_MD 0x06020 -/** - * UDI pixel divider, controlling how many pixels are stuffed into a packet. - * - * Value is pixels minus 1. Must be set to 1 pixel for SDVO. - */ -# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 -# define DPLL_MD_UDI_DIVIDER_SHIFT 24 -/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ -# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 -# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 -/** - * SDVO/UDI pixel multiplier. - * - * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus - * clock rate is 10 times the DPLL clock. At low resolution/refresh rate - * modes, the bus rate would be below the limits, so SDVO allows for stuffing - * dummy bytes in the datastream at an increased clock rate, with both sides of - * the link knowing how many bytes are fill. - * - * So, for a mode with a dotclock of 65Mhz, we would want to double the clock - * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be - * set to 130Mhz, and the SDVO multiplier set to 2x in this register and - * through an SDVO command. - * - * This register field has values of multiplication factor minus 1, with - * a maximum multiplier of 5 for SDVO. - */ -# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 -# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 -/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. - * This best be set to the default value (3) or the CRT won't work. No, - * I don't entirely understand what this does... - */ -# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f -# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 -/** @} */ - -#define DPLL_TEST 0x606c -# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) -# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) -# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) -# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) -# define DPLLB_TEST_N_BYPASS (1 << 19) -# define DPLLB_TEST_M_BYPASS (1 << 18) -# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) -# define DPLLA_TEST_N_BYPASS (1 << 3) -# define DPLLA_TEST_M_BYPASS (1 << 2) -# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) - -#define ADPA 0x61100 -#define ADPA_DAC_ENABLE (1<<31) -#define ADPA_DAC_DISABLE 0 -#define ADPA_PIPE_SELECT_MASK (1<<30) -#define ADPA_PIPE_A_SELECT 0 -#define ADPA_PIPE_B_SELECT (1<<30) -#define ADPA_USE_VGA_HVPOLARITY (1<<15) -#define ADPA_SETS_HVPOLARITY 0 -#define ADPA_VSYNC_CNTL_DISABLE (1<<11) -#define ADPA_VSYNC_CNTL_ENABLE 0 -#define ADPA_HSYNC_CNTL_DISABLE (1<<10) -#define ADPA_HSYNC_CNTL_ENABLE 0 -#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) -#define ADPA_VSYNC_ACTIVE_LOW 0 -#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) -#define ADPA_HSYNC_ACTIVE_LOW 0 - -#define FPA0 0x06040 -#define FPA1 0x06044 -#define FPB0 0x06048 -#define FPB1 0x0604c -# define FP_N_DIV_MASK 0x003f0000 -# define FP_N_DIV_SHIFT 16 -# define FP_M1_DIV_MASK 0x00003f00 -# define FP_M1_DIV_SHIFT 8 -# define FP_M2_DIV_MASK 0x0000003f -# define FP_M2_DIV_SHIFT 0 - - -#define PORT_HOTPLUG_EN 0x61110 -# define SDVOB_HOTPLUG_INT_EN (1 << 26) -# define SDVOC_HOTPLUG_INT_EN (1 << 25) -# define TV_HOTPLUG_INT_EN (1 << 18) -# define CRT_HOTPLUG_INT_EN (1 << 9) -# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) - -#define PORT_HOTPLUG_STAT 0x61114 -# define CRT_HOTPLUG_INT_STATUS (1 << 11) -# define TV_HOTPLUG_INT_STATUS (1 << 10) -# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) -# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) -# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) -# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) -# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) -# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) - -#define SDVOB 0x61140 -#define SDVOC 0x61160 -#define SDVO_ENABLE (1 << 31) -#define SDVO_PIPE_B_SELECT (1 << 30) -#define SDVO_STALL_SELECT (1 << 29) -#define SDVO_INTERRUPT_ENABLE (1 << 26) -/** - * 915G/GM SDVO pixel multiplier. - * - * Programmed value is multiplier - 1, up to 5x. - * - * \sa DPLL_MD_UDI_MULTIPLIER_MASK - */ -#define SDVO_PORT_MULTIPLY_MASK (7 << 23) -#define SDVO_PORT_MULTIPLY_SHIFT 23 -#define SDVO_PHASE_SELECT_MASK (15 << 19) -#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) -#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) -#define SDVOC_GANG_MODE (1 << 16) -#define SDVO_BORDER_ENABLE (1 << 7) -#define SDVOB_PCIE_CONCURRENCY (1 << 3) -#define SDVO_DETECTED (1 << 2) -/* Bits to be preserved when writing */ -#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) -#define SDVOC_PRESERVE_MASK (1 << 17) - -/** @defgroup LVDS - * @{ - */ -/** - * This register controls the LVDS output enable, pipe selection, and data - * format selection. - * - * All of the clock/data pairs are force powered down by power sequencing. - */ -#define LVDS 0x61180 -/** - * Enables the LVDS port. This bit must be set before DPLLs are enabled, as - * the DPLL semantics change when the LVDS is assigned to that pipe. - */ -# define LVDS_PORT_EN (1 << 31) -/** Selects pipe B for LVDS data. Must be set on pre-965. */ -# define LVDS_PIPEB_SELECT (1 << 30) - -/** - * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per - * pixel. - */ -# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) -# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) -# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) -/** - * Controls the A3 data pair, which contains the additional LSBs for 24 bit - * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be - * on. - */ -# define LVDS_A3_POWER_MASK (3 << 6) -# define LVDS_A3_POWER_DOWN (0 << 6) -# define LVDS_A3_POWER_UP (3 << 6) -/** - * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP - * is set. - */ -# define LVDS_CLKB_POWER_MASK (3 << 4) -# define LVDS_CLKB_POWER_DOWN (0 << 4) -# define LVDS_CLKB_POWER_UP (3 << 4) - -/** - * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 - * setting for whether we are in dual-channel mode. The B3 pair will - * additionally only be powered up when LVDS_A3_POWER_UP is set. - */ -# define LVDS_B0B3_POWER_MASK (3 << 2) -# define LVDS_B0B3_POWER_DOWN (0 << 2) -# define LVDS_B0B3_POWER_UP (3 << 2) - -#define PIPEACONF 0x70008 -#define PIPEACONF_ENABLE (1<<31) -#define PIPEACONF_DISABLE 0 -#define PIPEACONF_DOUBLE_WIDE (1<<30) -#define I965_PIPECONF_ACTIVE (1<<30) -#define PIPEACONF_SINGLE_WIDE 0 -#define PIPEACONF_PIPE_UNLOCKED 0 -#define PIPEACONF_PIPE_LOCKED (1<<25) -#define PIPEACONF_PALETTE 0 -#define PIPEACONF_GAMMA (1<<24) -#define PIPECONF_FORCE_BORDER (1<<25) -#define PIPECONF_PROGRESSIVE (0 << 21) -#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) -#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) - -#define DSPARB 0x70030 -#define DSPARB_CSTART_MASK (0x7f << 7) -#define DSPARB_CSTART_SHIFT 7 -#define DSPARB_BSTART_MASK (0x7f) -#define DSPARB_BSTART_SHIFT 0 - -#define PIPEBCONF 0x71008 -#define PIPEBCONF_ENABLE (1<<31) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_DOUBLE_WIDE (1<<30) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_GAMMA (1<<24) -#define PIPEBCONF_PALETTE 0 - -#define PIPEBGCMAXRED 0x71010 -#define PIPEBGCMAXGREEN 0x71014 -#define PIPEBGCMAXBLUE 0x71018 -#define PIPEBSTAT 0x71024 -#define PIPEBFRAMEHIGH 0x71040 -#define PIPEBFRAMEPIXEL 0x71044 - -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DISPLAY_PLANE_ENABLE (1<<31) -#define DISPLAY_PLANE_DISABLE 0 -#define DISPPLANE_GAMMA_ENABLE (1<<30) -#define DISPPLANE_GAMMA_DISABLE 0 -#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) -#define DISPPLANE_8BPP (0x2<<26) -#define DISPPLANE_15_16BPP (0x4<<26) -#define DISPPLANE_16BPP (0x5<<26) -#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) -#define DISPPLANE_32BPP (0x7<<26) -#define DISPPLANE_STEREO_ENABLE (1<<25) -#define DISPPLANE_STEREO_DISABLE 0 -#define DISPPLANE_SEL_PIPE_MASK (1<<24) -#define DISPPLANE_SEL_PIPE_A 0 -#define DISPPLANE_SEL_PIPE_B (1<<24) -#define DISPPLANE_SRC_KEY_ENABLE (1<<22) -#define DISPPLANE_SRC_KEY_DISABLE 0 -#define DISPPLANE_LINE_DOUBLE (1<<20) -#define DISPPLANE_NO_LINE_DOUBLE 0 -#define DISPPLANE_STEREO_POLARITY_FIRST 0 -#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) -/* plane B only */ -#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) -#define DISPPLANE_ALPHA_TRANS_DISABLE 0 -#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 -#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) - -#define DSPABASE 0x70184 -#define DSPASTRIDE 0x70188 - -#define DSPBBASE 0x71184 -#define DSPBADDR DSPBBASE -#define DSPBSTRIDE 0x71188 - -#define DSPAKEYVAL 0x70194 -#define DSPAKEYMASK 0x70198 - -#define DSPAPOS 0x7018C /* reserved */ -#define DSPASIZE 0x70190 -#define DSPBPOS 0x7118C -#define DSPBSIZE 0x71190 - -#define DSPASURF 0x7019C -#define DSPATILEOFF 0x701A4 - -#define DSPBSURF 0x7119C -#define DSPBTILEOFF 0x711A4 - -#define VGACNTRL 0x71400 -# define VGA_DISP_DISABLE (1 << 31) -# define VGA_2X_MODE (1 << 30) -# define VGA_PIPE_B_SELECT (1 << 29) - -/* - * Some BIOS scratch area registers. The 845 (and 830?) store the amount - * of video memory available to the BIOS in SWF1. - */ - -#define SWF0 0x71410 - -/* - * 855 scratch registers. - */ -#define SWF10 0x70410 - -#define SWF30 0x72414 - -/* - * Overlay registers. These are overlay registers accessed via MMIO. - * Those loaded via the overlay register page are defined in i830_video.c. - */ -#define OVADD 0x30000 - -#define DOVSTA 0x30008 -#define OC_BUF (0x3<<20) - -#define OGAMC5 0x30010 -#define OGAMC4 0x30014 -#define OGAMC3 0x30018 -#define OGAMC2 0x3001c -#define OGAMC1 0x30020 -#define OGAMC0 0x30024 -/* - * Palette registers - */ -#define PALETTE_A 0x0a000 -#define PALETTE_B 0x0a800 - -#define IS_I830(dev) ((dev)->pci_device == 0x3577) -#define IS_845G(dev) ((dev)->pci_device == 0x2562) -#define IS_I85X(dev) ((dev)->pci_device == 0x3582) -#define IS_I855(dev) ((dev)->pci_device == 0x3582) -#define IS_I865G(dev) ((dev)->pci_device == 0x2572) - -#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a) -#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) -#define IS_I945G(dev) ((dev)->pci_device == 0x2772) -#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\ - (dev)->pci_device == 0x27AE) -#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ - (dev)->pci_device == 0x2982 || \ - (dev)->pci_device == 0x2992 || \ - (dev)->pci_device == 0x29A2 || \ - (dev)->pci_device == 0x2A02 || \ - (dev)->pci_device == 0x2A12 || \ - (dev)->pci_device == 0x2A42 || \ - (dev)->pci_device == 0x2E02 || \ - (dev)->pci_device == 0x2E12 || \ - (dev)->pci_device == 0x2E22) - -#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) - -#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42) - -#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ - (dev)->pci_device == 0x2E12 || \ - (dev)->pci_device == 0x2E22) - -#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ - (dev)->pci_device == 0x29B2 || \ - (dev)->pci_device == 0x29D2) - -#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ - IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev)) - -#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ - IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev)) - -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev)) - -#define PRIMARY_RINGBUFFER_SIZE (128*1024) - -#endif |