aboutsummaryrefslogtreecommitdiff
path: root/drivers/char/ipmi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ipmi')
-rw-r--r--drivers/char/ipmi/ipmi_bt_sm.c641
-rw-r--r--drivers/char/ipmi/ipmi_kcs_sm.c14
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c12
-rw-r--r--drivers/char/ipmi/ipmi_smic_sm.c14
4 files changed, 417 insertions, 264 deletions
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 0030cd8e2e9..6c59baa887a 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -33,11 +33,13 @@
#include <linux/ipmi_msgdefs.h> /* for completion codes */
#include "ipmi_si_sm.h"
-static int bt_debug = 0x00; /* Production value 0, see following flags */
+#define BT_DEBUG_OFF 0 /* Used in production */
+#define BT_DEBUG_ENABLE 1 /* Generic messages */
+#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */
+#define BT_DEBUG_STATES 4 /* Verbose look at state changes */
+
+static int bt_debug = BT_DEBUG_OFF;
-#define BT_DEBUG_ENABLE 1
-#define BT_DEBUG_MSG 2
-#define BT_DEBUG_STATES 4
module_param(bt_debug, int, 0644);
MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
@@ -47,38 +49,54 @@ MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
Since the Open IPMI architecture is single-message oriented at this
stage, the queue depth of BT is of no concern. */
-#define BT_NORMAL_TIMEOUT 5000000 /* seconds in microseconds */
-#define BT_RETRY_LIMIT 2
-#define BT_RESET_DELAY 6000000 /* 6 seconds after warm reset */
+#define BT_NORMAL_TIMEOUT 5 /* seconds */
+#define BT_NORMAL_RETRY_LIMIT 2
+#define BT_RESET_DELAY 6 /* seconds after warm reset */
+
+/* States are written in chronological order and usually cover
+ multiple rows of the state table discussion in the IPMI spec. */
enum bt_states {
- BT_STATE_IDLE,
+ BT_STATE_IDLE = 0, /* Order is critical in this list */
BT_STATE_XACTION_START,
BT_STATE_WRITE_BYTES,
- BT_STATE_WRITE_END,
BT_STATE_WRITE_CONSUME,
- BT_STATE_B2H_WAIT,
- BT_STATE_READ_END,
- BT_STATE_RESET1, /* These must come last */
+ BT_STATE_READ_WAIT,
+ BT_STATE_CLEAR_B2H,
+ BT_STATE_READ_BYTES,
+ BT_STATE_RESET1, /* These must come last */
BT_STATE_RESET2,
BT_STATE_RESET3,
BT_STATE_RESTART,
- BT_STATE_HOSED
+ BT_STATE_PRINTME,
+ BT_STATE_CAPABILITIES_BEGIN,
+ BT_STATE_CAPABILITIES_END,
+ BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */
};
+/* Macros seen at the end of state "case" blocks. They help with legibility
+ and debugging. */
+
+#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; }
+
+#define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; }
+
struct si_sm_data {
enum bt_states state;
- enum bt_states last_state; /* assist printing and resets */
unsigned char seq; /* BT sequence number */
struct si_sm_io *io;
- unsigned char write_data[IPMI_MAX_MSG_LENGTH];
- int write_count;
- unsigned char read_data[IPMI_MAX_MSG_LENGTH];
- int read_count;
- int truncated;
- long timeout;
- unsigned int error_retries; /* end of "common" fields */
+ unsigned char write_data[IPMI_MAX_MSG_LENGTH];
+ int write_count;
+ unsigned char read_data[IPMI_MAX_MSG_LENGTH];
+ int read_count;
+ int truncated;
+ long timeout; /* microseconds countdown */
+ int error_retries; /* end of "common" fields */
int nonzero_status; /* hung BMCs stay all 0 */
+ enum bt_states complete; /* to divert the state machine */
+ int BT_CAP_outreqs;
+ long BT_CAP_req2rsp;
+ int BT_CAP_retries; /* Recommended retries */
};
#define BT_CLR_WR_PTR 0x01 /* See IPMI 1.5 table 11.6.4 */
@@ -111,86 +129,118 @@ struct si_sm_data {
static char *state2txt(unsigned char state)
{
switch (state) {
- case BT_STATE_IDLE: return("IDLE");
- case BT_STATE_XACTION_START: return("XACTION");
- case BT_STATE_WRITE_BYTES: return("WR_BYTES");
- case BT_STATE_WRITE_END: return("WR_END");
- case BT_STATE_WRITE_CONSUME: return("WR_CONSUME");
- case BT_STATE_B2H_WAIT: return("B2H_WAIT");
- case BT_STATE_READ_END: return("RD_END");
- case BT_STATE_RESET1: return("RESET1");
- case BT_STATE_RESET2: return("RESET2");
- case BT_STATE_RESET3: return("RESET3");
- case BT_STATE_RESTART: return("RESTART");
- case BT_STATE_HOSED: return("HOSED");
+ case BT_STATE_IDLE: return("IDLE");
+ case BT_STATE_XACTION_START: return("XACTION");
+ case BT_STATE_WRITE_BYTES: return("WR_BYTES");
+ case BT_STATE_WRITE_CONSUME: return("WR_CONSUME");
+ case BT_STATE_READ_WAIT: return("RD_WAIT");
+ case BT_STATE_CLEAR_B2H: return("CLEAR_B2H");
+ case BT_STATE_READ_BYTES: return("RD_BYTES");
+ case BT_STATE_RESET1: return("RESET1");
+ case BT_STATE_RESET2: return("RESET2");
+ case BT_STATE_RESET3: return("RESET3");
+ case BT_STATE_RESTART: return("RESTART");
+ case BT_STATE_LONG_BUSY: return("LONG_BUSY");
+ case BT_STATE_CAPABILITIES_BEGIN: return("CAP_BEGIN");
+ case BT_STATE_CAPABILITIES_END: return("CAP_END");
}
return("BAD STATE");
}
#define STATE2TXT state2txt(bt->state)
-static char *status2txt(unsigned char status, char *buf)
+static char *status2txt(unsigned char status)
{
+ /*
+ * This cannot be called by two threads at the same time and
+ * the buffer is always consumed immediately, so the static is
+ * safe to use.
+ */
+ static char buf[40];
+
strcpy(buf, "[ ");
- if (status & BT_B_BUSY) strcat(buf, "B_BUSY ");
- if (status & BT_H_BUSY) strcat(buf, "H_BUSY ");
- if (status & BT_OEM0) strcat(buf, "OEM0 ");
- if (status & BT_SMS_ATN) strcat(buf, "SMS ");
- if (status & BT_B2H_ATN) strcat(buf, "B2H ");
- if (status & BT_H2B_ATN) strcat(buf, "H2B ");
+ if (status & BT_B_BUSY)
+ strcat(buf, "B_BUSY ");
+ if (status & BT_H_BUSY)
+ strcat(buf, "H_BUSY ");
+ if (status & BT_OEM0)
+ strcat(buf, "OEM0 ");
+ if (status & BT_SMS_ATN)
+ strcat(buf, "SMS ");
+ if (status & BT_B2H_ATN)
+ strcat(buf, "B2H ");
+ if (status & BT_H2B_ATN)
+ strcat(buf, "H2B ");
strcat(buf, "]");
return buf;
}
-#define STATUS2TXT(buf) status2txt(status, buf)
+#define STATUS2TXT status2txt(status)
+
+/* called externally at insmod time, and internally on cleanup */
-/* This will be called from within this module on a hosed condition */
-#define FIRST_SEQ 0
static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io)
{
- bt->state = BT_STATE_IDLE;
- bt->last_state = BT_STATE_IDLE;
- bt->seq = FIRST_SEQ;
- bt->io = io;
- bt->write_count = 0;
- bt->read_count = 0;
- bt->error_retries = 0;
- bt->nonzero_status = 0;
- bt->truncated = 0;
- bt->timeout = BT_NORMAL_TIMEOUT;
+ memset(bt, 0, sizeof(struct si_sm_data));
+ if (bt->io != io) { /* external: one-time only things */
+ bt->io = io;
+ bt->seq = 0;
+ }
+ bt->state = BT_STATE_IDLE; /* start here */
+ bt->complete = BT_STATE_IDLE; /* end here */
+ bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * 1000000;
+ bt->BT_CAP_retries = BT_NORMAL_RETRY_LIMIT;
+ /* BT_CAP_outreqs == zero is a flag to read BT Capabilities */
return 3; /* We claim 3 bytes of space; ought to check SPMI table */
}
+/* Jam a completion code (probably an error) into a response */
+
+static void force_result(struct si_sm_data *bt, unsigned char completion_code)
+{
+ bt->read_data[0] = 4; /* # following bytes */
+ bt->read_data[1] = bt->write_data[1] | 4; /* Odd NetFn/LUN */
+ bt->read_data[2] = bt->write_data[2]; /* seq (ignored) */
+ bt->read_data[3] = bt->write_data[3]; /* Command */
+ bt->read_data[4] = completion_code;
+ bt->read_count = 5;
+}
+
+/* The upper state machine starts here */
+
static int bt_start_transaction(struct si_sm_data *bt,
unsigned char *data,
unsigned int size)
{
unsigned int i;
- if ((size < 2) || (size > (IPMI_MAX_MSG_LENGTH - 2)))
- return -1;
+ if (size < 2)
+ return IPMI_REQ_LEN_INVALID_ERR;
+ if (size > IPMI_MAX_MSG_LENGTH)
+ return IPMI_REQ_LEN_EXCEEDED_ERR;
- if ((bt->state != BT_STATE_IDLE) && (bt->state != BT_STATE_HOSED))
- return -2;
+ if (bt->state == BT_STATE_LONG_BUSY)
+ return IPMI_NODE_BUSY_ERR;
+
+ if (bt->state != BT_STATE_IDLE)
+ return IPMI_NOT_IN_MY_STATE_ERR;
if (bt_debug & BT_DEBUG_MSG) {
- printk(KERN_WARNING "+++++++++++++++++++++++++++++++++++++\n");
- printk(KERN_WARNING "BT: write seq=0x%02X:", bt->seq);
+ printk(KERN_WARNING "BT: +++++++++++++++++ New command\n");
+ printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2);
for (i = 0; i < size; i ++)
- printk (" %02x", data[i]);
+ printk (" %02x", data[i]);
printk("\n");
}
bt->write_data[0] = size + 1; /* all data plus seq byte */
bt->write_data[1] = *data; /* NetFn/LUN */
- bt->write_data[2] = bt->seq;
+ bt->write_data[2] = bt->seq++;
memcpy(bt->write_data + 3, data + 1, size - 1);
bt->write_count = size + 2;
-
bt->error_retries = 0;
bt->nonzero_status = 0;
- bt->read_count = 0;
bt->truncated = 0;
bt->state = BT_STATE_XACTION_START;
- bt->last_state = BT_STATE_IDLE;
- bt->timeout = BT_NORMAL_TIMEOUT;
+ bt->timeout = bt->BT_CAP_req2rsp;
+ force_result(bt, IPMI_ERR_UNSPECIFIED);
return 0;
}
@@ -198,38 +248,30 @@ static int bt_start_transaction(struct si_sm_data *bt,
it calls this. Strip out the length and seq bytes. */
static int bt_get_result(struct si_sm_data *bt,
- unsigned char *data,
- unsigned int length)
+ unsigned char *data,
+ unsigned int length)
{
int i, msg_len;
msg_len = bt->read_count - 2; /* account for length & seq */
- /* Always NetFn, Cmd, cCode */
if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) {
- printk(KERN_DEBUG "BT results: bad msg_len = %d\n", msg_len);
- data[0] = bt->write_data[1] | 0x4; /* Kludge a response */
- data[1] = bt->write_data[3];
- data[2] = IPMI_ERR_UNSPECIFIED;
+ force_result(bt, IPMI_ERR_UNSPECIFIED);
msg_len = 3;
- } else {
- data[0] = bt->read_data[1];
- data[1] = bt->read_data[3];
- if (length < msg_len)
- bt->truncated = 1;
- if (bt->truncated) { /* can be set in read_all_bytes() */
- data[2] = IPMI_ERR_MSG_TRUNCATED;
- msg_len = 3;
- } else
- memcpy(data + 2, bt->read_data + 4, msg_len - 2);
+ }
+ data[0] = bt->read_data[1];
+ data[1] = bt->read_data[3];
+ if (length < msg_len || bt->truncated) {
+ data[2] = IPMI_ERR_MSG_TRUNCATED;
+ msg_len = 3;
+ } else
+ memcpy(data + 2, bt->read_data + 4, msg_len - 2);
- if (bt_debug & BT_DEBUG_MSG) {
- printk (KERN_WARNING "BT: res (raw)");
- for (i = 0; i < msg_len; i++)
- printk(" %02x", data[i]);
- printk ("\n");
- }
+ if (bt_debug & BT_DEBUG_MSG) {
+ printk (KERN_WARNING "BT: result %d bytes:", msg_len);
+ for (i = 0; i < msg_len; i++)
+ printk(" %02x", data[i]);
+ printk ("\n");
}
- bt->read_count = 0; /* paranoia */
return msg_len;
}
@@ -238,22 +280,40 @@ static int bt_get_result(struct si_sm_data *bt,
static void reset_flags(struct si_sm_data *bt)
{
+ if (bt_debug)
+ printk(KERN_WARNING "IPMI BT: flag reset %s\n",
+ status2txt(BT_STATUS));
if (BT_STATUS & BT_H_BUSY)
- BT_CONTROL(BT_H_BUSY);
- if (BT_STATUS & BT_B_BUSY)
- BT_CONTROL(BT_B_BUSY);
- BT_CONTROL(BT_CLR_WR_PTR);
- BT_CONTROL(BT_SMS_ATN);
-
- if (BT_STATUS & BT_B2H_ATN) {
- int i;
- BT_CONTROL(BT_H_BUSY);
- BT_CONTROL(BT_B2H_ATN);
- BT_CONTROL(BT_CLR_RD_PTR);
- for (i = 0; i < IPMI_MAX_MSG_LENGTH + 2; i++)
- BMC2HOST;
- BT_CONTROL(BT_H_BUSY);
- }
+ BT_CONTROL(BT_H_BUSY); /* force clear */
+ BT_CONTROL(BT_CLR_WR_PTR); /* always reset */
+ BT_CONTROL(BT_SMS_ATN); /* always clear */
+ BT_INTMASK_W(BT_BMC_HWRST);
+}
+
+/* Get rid of an unwanted/stale response. This should only be needed for
+ BMCs that support multiple outstanding requests. */
+
+static void drain_BMC2HOST(struct si_sm_data *bt)
+{
+ int i, size;
+
+ if (!(BT_STATUS & BT_B2H_ATN)) /* Not signalling a response */
+ return;
+
+ BT_CONTROL(BT_H_BUSY); /* now set */
+ BT_CONTROL(BT_B2H_ATN); /* always clear */
+ BT_STATUS; /* pause */
+ BT_CONTROL(BT_B2H_ATN); /* some BMCs are stubborn */
+ BT_CONTROL(BT_CLR_RD_PTR); /* always reset */
+ if (bt_debug)
+ printk(KERN_WARNING "IPMI BT: stale response %s; ",
+ status2txt(BT_STATUS));
+ size = BMC2HOST;
+ for (i = 0; i < size ; i++)
+ BMC2HOST;
+ BT_CONTROL(BT_H_BUSY); /* now clear */
+ if (bt_debug)
+ printk("drained %d bytes\n", size + 1);
}
static inline void write_all_bytes(struct si_sm_data *bt)
@@ -261,201 +321,256 @@ static inline void write_all_bytes(struct si_sm_data *bt)
int i;
if (bt_debug & BT_DEBUG_MSG) {
- printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
+ printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
bt->write_count, bt->seq);
for (i = 0; i < bt->write_count; i++)
printk (" %02x", bt->write_data[i]);
printk ("\n");
}
for (i = 0; i < bt->write_count; i++)
- HOST2BMC(bt->write_data[i]);
+ HOST2BMC(bt->write_data[i]);
}
static inline int read_all_bytes(struct si_sm_data *bt)
{
unsigned char i;
+ /* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
+ Keep layout of first four bytes aligned with write_data[] */
+
bt->read_data[0] = BMC2HOST;
bt->read_count = bt->read_data[0];
- if (bt_debug & BT_DEBUG_MSG)
- printk(KERN_WARNING "BT: read %d bytes:", bt->read_count);
- /* minimum: length, NetFn, Seq, Cmd, cCode == 5 total, or 4 more
- following the length byte. */
if (bt->read_count < 4 || bt->read_count >= IPMI_MAX_MSG_LENGTH) {
if (bt_debug & BT_DEBUG_MSG)
- printk("bad length %d\n", bt->read_count);
+ printk(KERN_WARNING "BT: bad raw rsp len=%d\n",
+ bt->read_count);
bt->truncated = 1;
return 1; /* let next XACTION START clean it up */
}
for (i = 1; i <= bt->read_count; i++)
- bt->read_data[i] = BMC2HOST;
- bt->read_count++; /* account for the length byte */
+ bt->read_data[i] = BMC2HOST;
+ bt->read_count++; /* Account internally for length byte */
if (bt_debug & BT_DEBUG_MSG) {
- for (i = 0; i < bt->read_count; i++)
+ int max = bt->read_count;
+
+ printk(KERN_WARNING "BT: got %d bytes seq=0x%02X",
+ max, bt->read_data[2]);
+ if (max > 16)
+ max = 16;
+ for (i = 0; i < max; i++)
printk (" %02x", bt->read_data[i]);
- printk ("\n");
+ printk ("%s\n", bt->read_count == max ? "" : " ...");
}
- if (bt->seq != bt->write_data[2]) /* idiot check */
- printk(KERN_DEBUG "BT: internal error: sequence mismatch\n");
- /* per the spec, the (NetFn, Seq, Cmd) tuples should match */
- if ((bt->read_data[3] == bt->write_data[3]) && /* Cmd */
- (bt->read_data[2] == bt->write_data[2]) && /* Sequence */
- ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8)))
+ /* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */
+ if ((bt->read_data[3] == bt->write_data[3]) &&
+ (bt->read_data[2] == bt->write_data[2]) &&
+ ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8)))
return 1;
if (bt_debug & BT_DEBUG_MSG)
- printk(KERN_WARNING "BT: bad packet: "
+ printk(KERN_WARNING "IPMI BT: bad packet: "
"want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\n",
- bt->write_data[1], bt->write_data[2], bt->write_data[3],
+ bt->write_data[1] | 0x04, bt->write_data[2], bt->write_data[3],
bt->read_data[1], bt->read_data[2], bt->read_data[3]);
return 0;
}
-/* Modifies bt->state appropriately, need to get into the bt_event() switch */
+/* Restart if retries are left, or return an error completion code */
-static void error_recovery(struct si_sm_data *bt, char *reason)
+static enum si_sm_result error_recovery(struct si_sm_data *bt,
+ unsigned char status,
+ unsigned char cCode)
{
- unsigned char status;
- char buf[40]; /* For getting status */
+ char *reason;
- bt->timeout = BT_NORMAL_TIMEOUT; /* various places want to retry */
+ bt->timeout = bt->BT_CAP_req2rsp;
- status = BT_STATUS;
- printk(KERN_DEBUG "BT: %s in %s %s\n", reason, STATE2TXT,
- STATUS2TXT(buf));
+ switch (cCode) {
+ case IPMI_TIMEOUT_ERR:
+ reason = "timeout";
+ break;
+ default:
+ reason = "internal error";
+ break;
+ }
+
+ printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */
+ reason, STATE2TXT, STATUS2TXT);
+ /* Per the IPMI spec, retries are based on the sequence number
+ known only to this module, so manage a restart here. */
(bt->error_retries)++;
- if (bt->error_retries > BT_RETRY_LIMIT) {
- printk(KERN_DEBUG "retry limit (%d) exceeded\n", BT_RETRY_LIMIT);
- bt->state = BT_STATE_HOSED;
- if (!bt->nonzero_status)
- printk(KERN_ERR "IPMI: BT stuck, try power cycle\n");
- else if (bt->error_retries <= BT_RETRY_LIMIT + 1) {
- printk(KERN_DEBUG "IPMI: BT reset (takes 5 secs)\n");
- bt->state = BT_STATE_RESET1;
- }
- return;
+ if (bt->error_retries < bt->BT_CAP_retries) {
+ printk("%d retries left\n",
+ bt->BT_CAP_retries - bt->error_retries);
+ bt->state = BT_STATE_RESTART;
+ return SI_SM_CALL_WITHOUT_DELAY;
}
- /* Sometimes the BMC queues get in an "off-by-one" state...*/
- if ((bt->state == BT_STATE_B2H_WAIT) && (status & BT_B2H_ATN)) {
- printk(KERN_DEBUG "retry B2H_WAIT\n");
- return;
+ printk("failed %d retries, sending error response\n",
+ bt->BT_CAP_retries);
+ if (!bt->nonzero_status)
+ printk(KERN_ERR "IPMI BT: stuck, try power cycle\n");
+
+ /* this is most likely during insmod */
+ else if (bt->seq <= (unsigned char)(bt->BT_CAP_retries & 0xFF)) {
+ printk(KERN_WARNING "IPMI: BT reset (takes 5 secs)\n");
+ bt->state = BT_STATE_RESET1;
+ return SI_SM_CALL_WITHOUT_DELAY;
}
- printk(KERN_DEBUG "restart command\n");
- bt->state = BT_STATE_RESTART;
+ /* Concoct a useful error message, set up the next state, and
+ be done with this sequence. */
+
+ bt->state = BT_STATE_IDLE;
+ switch (cCode) {
+ case IPMI_TIMEOUT_ERR:
+ if (status & BT_B_BUSY) {
+ cCode = IPMI_NODE_BUSY_ERR;
+ bt->state = BT_STATE_LONG_BUSY;
+ }
+ break;
+ default:
+ break;
+ }
+ force_result(bt, cCode);
+ return SI_SM_TRANSACTION_COMPLETE;
}
-/* Check the status and (possibly) advance the BT state machine. The
- default return is SI_SM_CALL_WITH_DELAY. */
+/* Check status and (usually) take action and change this state machine. */
static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
{
- unsigned char status;
- char buf[40]; /* For getting status */
+ unsigned char status, BT_CAP[8];
+ static enum bt_states last_printed = BT_STATE_PRINTME;
int i;
status = BT_STATUS;
bt->nonzero_status |= status;
-
- if ((bt_debug & BT_DEBUG_STATES) && (bt->state != bt->last_state))
+ if ((bt_debug & BT_DEBUG_STATES) && (bt->state != last_printed)) {
printk(KERN_WARNING "BT: %s %s TO=%ld - %ld \n",
STATE2TXT,
- STATUS2TXT(buf),
+ STATUS2TXT,
bt->timeout,
time);
- bt->last_state = bt->state;
+ last_printed = bt->state;
+ }
- if (bt->state == BT_STATE_HOSED)
- return SI_SM_HOSED;
+ /* Commands that time out may still (eventually) provide a response.
+ This stale response will get in the way of a new response so remove
+ it if possible (hopefully during IDLE). Even if it comes up later
+ it will be rejected by its (now-forgotten) seq number. */
+
+ if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) {
+ drain_BMC2HOST(bt);
+ BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
+ }
- if (bt->state != BT_STATE_IDLE) { /* do timeout test */
+ if ((bt->state != BT_STATE_IDLE) &&
+ (bt->state < BT_STATE_PRINTME)) { /* check timeout */
bt->timeout -= time;
- if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) {
- error_recovery(bt, "timed out");
- return SI_SM_CALL_WITHOUT_DELAY;
- }
+ if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1))
+ return error_recovery(bt,
+ status,
+ IPMI_TIMEOUT_ERR);
}
switch (bt->state) {
- case BT_STATE_IDLE: /* check for asynchronous messages */
+ /* Idle state first checks for asynchronous messages from another
+ channel, then does some opportunistic housekeeping. */
+
+ case BT_STATE_IDLE:
if (status & BT_SMS_ATN) {
BT_CONTROL(BT_SMS_ATN); /* clear it */
return SI_SM_ATTN;
}
- return SI_SM_IDLE;
- case BT_STATE_XACTION_START:
- if (status & BT_H_BUSY) {
+ if (status & BT_H_BUSY) /* clear a leftover H_BUSY */
BT_CONTROL(BT_H_BUSY);
- break;
- }
- if (status & BT_B2H_ATN)
- break;
- bt->state = BT_STATE_WRITE_BYTES;
- return SI_SM_CALL_WITHOUT_DELAY; /* for logging */
- case BT_STATE_WRITE_BYTES:
+ /* Read BT capabilities if it hasn't been done yet */
+ if (!bt->BT_CAP_outreqs)
+ BT_STATE_CHANGE(BT_STATE_CAPABILITIES_BEGIN,
+ SI_SM_CALL_WITHOUT_DELAY);
+ bt->timeout = bt->BT_CAP_req2rsp;
+ BT_SI_SM_RETURN(SI_SM_IDLE);
+
+ case BT_STATE_XACTION_START:
if (status & (BT_B_BUSY | BT_H2B_ATN))
- break;
+ BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
+ if (BT_STATUS & BT_H_BUSY)
+ BT_CONTROL(BT_H_BUSY); /* force clear */
+ BT_STATE_CHANGE(BT_STATE_WRITE_BYTES,
+ SI_SM_CALL_WITHOUT_DELAY);
+
+ case BT_STATE_WRITE_BYTES:
+ if (status & BT_H_BUSY)
+ BT_CONTROL(BT_H_BUSY); /* clear */
BT_CONTROL(BT_CLR_WR_PTR);
write_all_bytes(bt);
- BT_CONTROL(BT_H2B_ATN); /* clears too fast to catch? */
- bt->state = BT_STATE_WRITE_CONSUME;
- return SI_SM_CALL_WITHOUT_DELAY; /* it MIGHT sail through */
-
- case BT_STATE_WRITE_CONSUME: /* BMCs usually blow right thru here */
- if (status & (BT_H2B_ATN | BT_B_BUSY))
- break;
- bt->state = BT_STATE_B2H_WAIT;
- /* fall through with status */
-
- /* Stay in BT_STATE_B2H_WAIT until a packet matches. However, spinning
- hard here, constantly reading status, seems to hold off the
- generation of B2H_ATN so ALWAYS return CALL_WITH_DELAY. */
-
- case BT_STATE_B2H_WAIT:
- if (!(status & BT_B2H_ATN))
- break;
-
- /* Assume ordered, uncached writes: no need to wait */
- if (!(status & BT_H_BUSY))
- BT_CONTROL(BT_H_BUSY); /* set */
- BT_CONTROL(BT_B2H_ATN); /* clear it, ACK to the BMC */
- BT_CONTROL(BT_CLR_RD_PTR); /* reset the queue */
- i = read_all_bytes(bt);
- BT_CONTROL(BT_H_BUSY); /* clear */
- if (!i) /* Try this state again */
- break;
- bt->state = BT_STATE_READ_END;
- return SI_SM_CALL_WITHOUT_DELAY; /* for logging */
-
- case BT_STATE_READ_END:
-
- /* I could wait on BT_H_BUSY to go clear for a truly clean
- exit. However, this is already done in XACTION_START
- and the (possible) extra loop/status/possible wait affects
- performance. So, as long as it works, just ignore H_BUSY */
-
-#ifdef MAKE_THIS_TRUE_IF_NECESSARY
+ BT_CONTROL(BT_H2B_ATN); /* can clear too fast to catch */
+ BT_STATE_CHANGE(BT_STATE_WRITE_CONSUME,
+ SI_SM_CALL_WITHOUT_DELAY);
- if (status & BT_H_BUSY)
- break;
-#endif
- bt->seq++;
- bt->state = BT_STATE_IDLE;
- return SI_SM_TRANSACTION_COMPLETE;
+ case BT_STATE_WRITE_CONSUME:
+ if (status & (BT_B_BUSY | BT_H2B_ATN))
+ BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
+ BT_STATE_CHANGE(BT_STATE_READ_WAIT,
+ SI_SM_CALL_WITHOUT_DELAY);
+
+ /* Spinning hard can suppress B2H_ATN and force a timeout */
+
+ case BT_STATE_READ_WAIT:
+ if (!(status & BT_B2H_ATN))
+ BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
+ BT_CONTROL(BT_H_BUSY); /* set */
+
+ /* Uncached, ordered writes should just proceeed serially but
+ some BMCs don't clear B2H_ATN with one hit. Fast-path a
+ workaround without too much penalty to the general case. */
+
+ BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */
+ BT_STATE_CHANGE(BT_STATE_CLEAR_B2H,
+ SI_SM_CALL_WITHOUT_DELAY);
+
+ case BT_STATE_CLEAR_B2H:
+ if (status & BT_B2H_ATN) { /* keep hitting it */
+ BT_CONTROL(BT_B2H_ATN);
+ BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
+ }
+ BT_STATE_CHANGE(BT_STATE_READ_BYTES,
+ SI_SM_CALL_WITHOUT_DELAY);
+
+ case BT_STATE_READ_BYTES:
+ if (!(status & BT_H_BUSY)) /* check in case of retry */
+ BT_CONTROL(BT_H_BUSY);
+ BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */
+ i = read_all_bytes(bt); /* true == packet seq match */
+ BT_CONTROL(BT_H_BUSY); /* NOW clear */
+ if (!i) /* Not my message */
+ BT_STATE_CHANGE(BT_STATE_READ_WAIT,
+ SI_SM_CALL_WITHOUT_DELAY);
+ bt->state = bt->complete;
+ return bt->state == BT_STATE_IDLE ? /* where to next? */
+ SI_SM_TRANSACTION_COMPLETE : /* normal */
+ SI_SM_CALL_WITHOUT_DELAY; /* Startup magic */
+
+ case BT_STATE_LONG_BUSY: /* For example: after FW update */
+ if (!(status & BT_B_BUSY)) {
+ reset_flags(bt); /* next state is now IDLE */
+ bt_init_data(bt, bt->io);
+ }
+ return SI_SM_CALL_WITH_DELAY; /* No repeat printing */
case BT_STATE_RESET1:
- reset_flags(bt);
- bt->timeout = BT_RESET_DELAY;
- bt->state = BT_STATE_RESET2;
- break;
+ reset_flags(bt);
+ drain_BMC2HOST(bt);
+ BT_STATE_CHANGE(BT_STATE_RESET2,
+ SI_SM_CALL_WITH_DELAY);
case BT_STATE_RESET2: /* Send a soft reset */
BT_CONTROL(BT_CLR_WR_PTR);
@@ -464,29 +579,59 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
HOST2BMC(42); /* Sequence number */
HOST2BMC(3); /* Cmd == Soft reset */
BT_CONTROL(BT_H2B_ATN);
- bt->state = BT_STATE_RESET3;
- break;
+ bt->timeout = BT_RESET_DELAY * 1000000;
+ BT_STATE_CHANGE(BT_STATE_RESET3,
+ SI_SM_CALL_WITH_DELAY);
- case BT_STATE_RESET3:
+ case BT_STATE_RESET3: /* Hold off everything for a bit */
if (bt->timeout > 0)
- return SI_SM_CALL_WITH_DELAY;
- bt->state = BT_STATE_RESTART; /* printk in debug modes */
- break;
+ return SI_SM_CALL_WITH_DELAY;
+ drain_BMC2HOST(bt);
+ BT_STATE_CHANGE(BT_STATE_RESTART,
+ SI_SM_CALL_WITH_DELAY);
- case BT_STATE_RESTART: /* don't reset retries! */
- reset_flags(bt);
- bt->write_data[2] = ++bt->seq;
+ case BT_STATE_RESTART: /* don't reset retries or seq! */
bt->read_count = 0;
bt->nonzero_status = 0;
- bt->timeout = BT_NORMAL_TIMEOUT;
- bt->state = BT_STATE_XACTION_START;
- break;
-
- default: /* HOSED is supposed to be caught much earlier */
- error_recovery(bt, "internal logic error");
- break;
- }
- return SI_SM_CALL_WITH_DELAY;
+ bt->timeout = bt->BT_CAP_req2rsp;
+ BT_STATE_CHANGE(BT_STATE_XACTION_START,
+ SI_SM_CALL_WITH_DELAY);
+
+ /* Get BT Capabilities, using timing of upper level state machine.
+ Set outreqs to prevent infinite loop on timeout. */
+ case BT_STATE_CAPABILITIES_BEGIN:
+ bt->BT_CAP_outreqs = 1;
+ {
+ unsigned char GetBT_CAP[] = { 0x18, 0x36 };
+ bt->state = BT_STATE_IDLE;
+ bt_start_transaction(bt, GetBT_CAP, sizeof(GetBT_CAP));
+ }
+ bt->complete = BT_STATE_CAPABILITIES_END;
+ BT_STATE_CHANGE(BT_STATE_XACTION_START,
+ SI_SM_CALL_WITH_DELAY);
+
+ case BT_STATE_CAPABILITIES_END:
+ i = bt_get_result(bt, BT_CAP, sizeof(BT_CAP));
+ bt_init_data(bt, bt->io);
+ if ((i == 8) && !BT_CAP[2]) {
+ bt->BT_CAP_outreqs = BT_CAP[3];
+ bt->BT_CAP_req2rsp = BT_CAP[6] * 1000000;
+ bt->BT_CAP_retries = BT_CAP[7];
+ } else
+ printk(KERN_WARNING "IPMI BT: using default values\n");
+ if (!bt->BT_CAP_outreqs)
+ bt->BT_CAP_outreqs = 1;
+ printk(KERN_WARNING "IPMI BT: req2rsp=%ld secs retries=%d\n",
+ bt->BT_CAP_req2rsp / 1000000L, bt->BT_CAP_retries);
+ bt->timeout = bt->BT_CAP_req2rsp;
+ return SI_SM_CALL_WITHOUT_DELAY;
+
+ default: /* should never occur */
+ return error_recovery(bt,
+ status,
+ IPMI_ERR_UNSPECIFIED);
+ }
+ return SI_SM_CALL_WITH_DELAY;
}
static int bt_detect(struct si_sm_data *bt)
@@ -497,7 +642,7 @@ static int bt_detect(struct si_sm_data *bt)
test that first. The calling routine uses negative logic. */
if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF))
- return 1;
+ return 1;
reset_flags(bt);
return 0;
}
@@ -513,11 +658,11 @@ static int bt_size(void)
struct si_sm_handlers bt_smi_handlers =
{
- .init_data = bt_init_data,
- .start_transaction = bt_start_transaction,
- .get_result = bt_get_result,
- .event = bt_event,
- .detect = bt_detect,
- .cleanup = bt_cleanup,
- .size = bt_size,
+ .init_data = bt_init_data,
+ .start_transaction = bt_start_transaction,
+ .get_result = bt_get_result,
+ .event = bt_event,
+ .detect = bt_detect,
+ .cleanup = bt_cleanup,
+ .size = bt_size,
};
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index 2062675f9e9..fb46979567e 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -261,12 +261,14 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data,
{
unsigned int i;
- if ((size < 2) || (size > MAX_KCS_WRITE_SIZE)) {
- return -1;
- }
- if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) {
- return -2;
- }
+ if (size < 2)
+ return IPMI_REQ_LEN_INVALID_ERR;
+ if (size > MAX_KCS_WRITE_SIZE)
+ return IPMI_REQ_LEN_EXCEEDED_ERR;
+
+ if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED))
+ return IPMI_NOT_IN_MY_STATE_ERR;
+
if (kcs_debug & KCS_DEBUG_MSG) {
printk(KERN_DEBUG "start_kcs_transaction -");
for (i = 0; i < size; i ++) {
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index c7de2e86a6d..81a0c89598e 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -247,14 +247,18 @@ static void deliver_recv_msg(struct smi_info *smi_info,
spin_lock(&(smi_info->si_lock));
}
-static void return_hosed_msg(struct smi_info *smi_info)
+static void return_hosed_msg(struct smi_info *smi_info, int cCode)
{
struct ipmi_smi_msg *msg = smi_info->curr_msg;
+ if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED)
+ cCode = IPMI_ERR_UNSPECIFIED;
+ /* else use it as is */
+
/* Make it a reponse */
msg->rsp[0] = msg->data[0] | 4;
msg->rsp[1] = msg->data[1];
- msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
+ msg->rsp[2] = cCode;
msg->rsp_size = 3;
smi_info->curr_msg = NULL;
@@ -305,7 +309,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
smi_info->curr_msg->data,
smi_info->curr_msg->data_size);
if (err) {
- return_hosed_msg(smi_info);
+ return_hosed_msg(smi_info, err);
}
rv = SI_SM_CALL_WITHOUT_DELAY;
@@ -647,7 +651,7 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
/* If we were handling a user message, format
a response to send to the upper layer to
tell it about the error. */
- return_hosed_msg(smi_info);
+ return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
}
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
}
diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c
index 39d7e5ef1a2..e64ea7d25d2 100644
--- a/drivers/char/ipmi/ipmi_smic_sm.c
+++ b/drivers/char/ipmi/ipmi_smic_sm.c
@@ -141,12 +141,14 @@ static int start_smic_transaction(struct si_sm_data *smic,
{
unsigned int i;
- if ((size < 2) || (size > MAX_SMIC_WRITE_SIZE)) {
- return -1;
- }
- if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) {
- return -2;
- }
+ if (size < 2)
+ return IPMI_REQ_LEN_INVALID_ERR;
+ if (size > MAX_SMIC_WRITE_SIZE)
+ return IPMI_REQ_LEN_EXCEEDED_ERR;
+
+ if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED))
+ return IPMI_NOT_IN_MY_STATE_ERR;
+
if (smic_debug & SMIC_DEBUG_MSG) {
printk(KERN_INFO "start_smic_transaction -");
for (i = 0; i < size; i ++) {