diff options
Diffstat (limited to 'drivers/char/ipmi')
| -rw-r--r-- | drivers/char/ipmi/ipmi_bt_sm.c | 153 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_kcs_sm.c | 153 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 466 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_sm.h | 89 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_smic_sm.c | 149 |
5 files changed, 574 insertions, 436 deletions
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index e736119b649..7b98c067190 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -37,26 +37,32 @@ #define BT_DEBUG_ENABLE 1 /* Generic messages */ #define BT_DEBUG_MSG 2 /* Prints all request/response buffers */ #define BT_DEBUG_STATES 4 /* Verbose look at state changes */ -/* BT_DEBUG_OFF must be zero to correspond to the default uninitialized - value */ +/* + * BT_DEBUG_OFF must be zero to correspond to the default uninitialized + * value + */ static int bt_debug; /* 0 == BT_DEBUG_OFF */ module_param(bt_debug, int, 0644); MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); -/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds, - and 64 byte buffers. However, one HP implementation wants 255 bytes of - buffer (with a documented message of 160 bytes) so go for the max. - Since the Open IPMI architecture is single-message oriented at this - stage, the queue depth of BT is of no concern. */ +/* + * Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds, + * and 64 byte buffers. However, one HP implementation wants 255 bytes of + * buffer (with a documented message of 160 bytes) so go for the max. + * Since the Open IPMI architecture is single-message oriented at this + * stage, the queue depth of BT is of no concern. + */ #define BT_NORMAL_TIMEOUT 5 /* seconds */ #define BT_NORMAL_RETRY_LIMIT 2 #define BT_RESET_DELAY 6 /* seconds after warm reset */ -/* States are written in chronological order and usually cover - multiple rows of the state table discussion in the IPMI spec. */ +/* + * States are written in chronological order and usually cover + * multiple rows of the state table discussion in the IPMI spec. + */ enum bt_states { BT_STATE_IDLE = 0, /* Order is critical in this list */ @@ -76,10 +82,12 @@ enum bt_states { BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */ }; -/* Macros seen at the end of state "case" blocks. They help with legibility - and debugging. */ +/* + * Macros seen at the end of state "case" blocks. They help with legibility + * and debugging. + */ -#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; } +#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; } #define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; } @@ -110,11 +118,13 @@ struct si_sm_data { #define BT_H_BUSY 0x40 #define BT_B_BUSY 0x80 -/* Some bits are toggled on each write: write once to set it, once - more to clear it; writing a zero does nothing. To absolutely - clear it, check its state and write if set. This avoids the "get - current then use as mask" scheme to modify one bit. Note that the - variable "bt" is hardcoded into these macros. */ +/* + * Some bits are toggled on each write: write once to set it, once + * more to clear it; writing a zero does nothing. To absolutely + * clear it, check its state and write if set. This avoids the "get + * current then use as mask" scheme to modify one bit. Note that the + * variable "bt" is hardcoded into these macros. + */ #define BT_STATUS bt->io->inputb(bt->io, 0) #define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x) @@ -125,8 +135,10 @@ struct si_sm_data { #define BT_INTMASK_R bt->io->inputb(bt->io, 2) #define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x) -/* Convenience routines for debugging. These are not multi-open safe! - Note the macros have hardcoded variables in them. */ +/* + * Convenience routines for debugging. These are not multi-open safe! + * Note the macros have hardcoded variables in them. + */ static char *state2txt(unsigned char state) { @@ -182,7 +194,8 @@ static char *status2txt(unsigned char status) static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io) { memset(bt, 0, sizeof(struct si_sm_data)); - if (bt->io != io) { /* external: one-time only things */ + if (bt->io != io) { + /* external: one-time only things */ bt->io = io; bt->seq = 0; } @@ -229,7 +242,7 @@ static int bt_start_transaction(struct si_sm_data *bt, printk(KERN_WARNING "BT: +++++++++++++++++ New command\n"); printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2); for (i = 0; i < size; i ++) - printk (" %02x", data[i]); + printk(" %02x", data[i]); printk("\n"); } bt->write_data[0] = size + 1; /* all data plus seq byte */ @@ -246,8 +259,10 @@ static int bt_start_transaction(struct si_sm_data *bt, return 0; } -/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE - it calls this. Strip out the length and seq bytes. */ +/* + * After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE + * it calls this. Strip out the length and seq bytes. + */ static int bt_get_result(struct si_sm_data *bt, unsigned char *data, @@ -269,10 +284,10 @@ static int bt_get_result(struct si_sm_data *bt, memcpy(data + 2, bt->read_data + 4, msg_len - 2); if (bt_debug & BT_DEBUG_MSG) { - printk (KERN_WARNING "BT: result %d bytes:", msg_len); + printk(KERN_WARNING "BT: result %d bytes:", msg_len); for (i = 0; i < msg_len; i++) printk(" %02x", data[i]); - printk ("\n"); + printk("\n"); } return msg_len; } @@ -292,8 +307,10 @@ static void reset_flags(struct si_sm_data *bt) BT_INTMASK_W(BT_BMC_HWRST); } -/* Get rid of an unwanted/stale response. This should only be needed for - BMCs that support multiple outstanding requests. */ +/* + * Get rid of an unwanted/stale response. This should only be needed for + * BMCs that support multiple outstanding requests. + */ static void drain_BMC2HOST(struct si_sm_data *bt) { @@ -326,8 +343,8 @@ static inline void write_all_bytes(struct si_sm_data *bt) printk(KERN_WARNING "BT: write %d bytes seq=0x%02X", bt->write_count, bt->seq); for (i = 0; i < bt->write_count; i++) - printk (" %02x", bt->write_data[i]); - printk ("\n"); + printk(" %02x", bt->write_data[i]); + printk("\n"); } for (i = 0; i < bt->write_count; i++) HOST2BMC(bt->write_data[i]); @@ -337,8 +354,10 @@ static inline int read_all_bytes(struct si_sm_data *bt) { unsigned char i; - /* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. - Keep layout of first four bytes aligned with write_data[] */ + /* + * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. + * Keep layout of first four bytes aligned with write_data[] + */ bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; @@ -362,8 +381,8 @@ static inline int read_all_bytes(struct si_sm_data *bt) if (max > 16) max = 16; for (i = 0; i < max; i++) - printk (" %02x", bt->read_data[i]); - printk ("%s\n", bt->read_count == max ? "" : " ..."); + printk(KERN_CONT " %02x", bt->read_data[i]); + printk(KERN_CONT "%s\n", bt->read_count == max ? "" : " ..."); } /* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */ @@ -402,8 +421,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt, printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */ reason, STATE2TXT, STATUS2TXT); - /* Per the IPMI spec, retries are based on the sequence number - known only to this module, so manage a restart here. */ + /* + * Per the IPMI spec, retries are based on the sequence number + * known only to this module, so manage a restart here. + */ (bt->error_retries)++; if (bt->error_retries < bt->BT_CAP_retries) { printk("%d retries left\n", @@ -412,8 +433,8 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt, return SI_SM_CALL_WITHOUT_DELAY; } - printk("failed %d retries, sending error response\n", - bt->BT_CAP_retries); + printk(KERN_WARNING "failed %d retries, sending error response\n", + bt->BT_CAP_retries); if (!bt->nonzero_status) printk(KERN_ERR "IPMI BT: stuck, try power cycle\n"); @@ -424,8 +445,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt, return SI_SM_CALL_WITHOUT_DELAY; } - /* Concoct a useful error message, set up the next state, and - be done with this sequence. */ + /* + * Concoct a useful error message, set up the next state, and + * be done with this sequence. + */ bt->state = BT_STATE_IDLE; switch (cCode) { @@ -461,10 +484,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) last_printed = bt->state; } - /* Commands that time out may still (eventually) provide a response. - This stale response will get in the way of a new response so remove - it if possible (hopefully during IDLE). Even if it comes up later - it will be rejected by its (now-forgotten) seq number. */ + /* + * Commands that time out may still (eventually) provide a response. + * This stale response will get in the way of a new response so remove + * it if possible (hopefully during IDLE). Even if it comes up later + * it will be rejected by its (now-forgotten) seq number. + */ if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) { drain_BMC2HOST(bt); @@ -472,7 +497,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) } if ((bt->state != BT_STATE_IDLE) && - (bt->state < BT_STATE_PRINTME)) { /* check timeout */ + (bt->state < BT_STATE_PRINTME)) { + /* check timeout */ bt->timeout -= time; if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) return error_recovery(bt, @@ -482,8 +508,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) switch (bt->state) { - /* Idle state first checks for asynchronous messages from another - channel, then does some opportunistic housekeeping. */ + /* + * Idle state first checks for asynchronous messages from another + * channel, then does some opportunistic housekeeping. + */ case BT_STATE_IDLE: if (status & BT_SMS_ATN) { @@ -531,16 +559,19 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); BT_CONTROL(BT_H_BUSY); /* set */ - /* Uncached, ordered writes should just proceeed serially but - some BMCs don't clear B2H_ATN with one hit. Fast-path a - workaround without too much penalty to the general case. */ + /* + * Uncached, ordered writes should just proceeed serially but + * some BMCs don't clear B2H_ATN with one hit. Fast-path a + * workaround without too much penalty to the general case. + */ BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */ BT_STATE_CHANGE(BT_STATE_CLEAR_B2H, SI_SM_CALL_WITHOUT_DELAY); case BT_STATE_CLEAR_B2H: - if (status & BT_B2H_ATN) { /* keep hitting it */ + if (status & BT_B2H_ATN) { + /* keep hitting it */ BT_CONTROL(BT_B2H_ATN); BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); } @@ -548,7 +579,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) SI_SM_CALL_WITHOUT_DELAY); case BT_STATE_READ_BYTES: - if (!(status & BT_H_BUSY)) /* check in case of retry */ + if (!(status & BT_H_BUSY)) + /* check in case of retry */ BT_CONTROL(BT_H_BUSY); BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */ i = read_all_bytes(bt); /* true == packet seq match */ @@ -599,8 +631,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) BT_STATE_CHANGE(BT_STATE_XACTION_START, SI_SM_CALL_WITH_DELAY); - /* Get BT Capabilities, using timing of upper level state machine. - Set outreqs to prevent infinite loop on timeout. */ + /* + * Get BT Capabilities, using timing of upper level state machine. + * Set outreqs to prevent infinite loop on timeout. + */ case BT_STATE_CAPABILITIES_BEGIN: bt->BT_CAP_outreqs = 1; { @@ -638,10 +672,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) static int bt_detect(struct si_sm_data *bt) { - /* It's impossible for the BT status and interrupt registers to be - all 1's, (assuming a properly functioning, self-initialized BMC) - but that's what you get from reading a bogus address, so we - test that first. The calling routine uses negative logic. */ + /* + * It's impossible for the BT status and interrupt registers to be + * all 1's, (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. The calling routine uses negative logic. + */ if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF)) return 1; @@ -658,8 +694,7 @@ static int bt_size(void) return sizeof(struct si_sm_data); } -struct si_sm_handlers bt_smi_handlers = -{ +struct si_sm_handlers bt_smi_handlers = { .init_data = bt_init_data, .start_transaction = bt_start_transaction, .get_result = bt_get_result, diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c index c1b8228cb7b..80704875794 100644 --- a/drivers/char/ipmi/ipmi_kcs_sm.c +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -60,37 +60,58 @@ MODULE_PARM_DESC(kcs_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); /* The states the KCS driver may be in. */ enum kcs_states { - KCS_IDLE, /* The KCS interface is currently - doing nothing. */ - KCS_START_OP, /* We are starting an operation. The - data is in the output buffer, but - nothing has been done to the - interface yet. This was added to - the state machine in the spec to - wait for the initial IBF. */ - KCS_WAIT_WRITE_START, /* We have written a write cmd to the - interface. */ - KCS_WAIT_WRITE, /* We are writing bytes to the - interface. */ - KCS_WAIT_WRITE_END, /* We have written the write end cmd - to the interface, and still need to - write the last byte. */ - KCS_WAIT_READ, /* We are waiting to read data from - the interface. */ - KCS_ERROR0, /* State to transition to the error - handler, this was added to the - state machine in the spec to be - sure IBF was there. */ - KCS_ERROR1, /* First stage error handler, wait for - the interface to respond. */ - KCS_ERROR2, /* The abort cmd has been written, - wait for the interface to - respond. */ - KCS_ERROR3, /* We wrote some data to the - interface, wait for it to switch to - read mode. */ - KCS_HOSED /* The hardware failed to follow the - state machine. */ + /* The KCS interface is currently doing nothing. */ + KCS_IDLE, + + /* + * We are starting an operation. The data is in the output + * buffer, but nothing has been done to the interface yet. This + * was added to the state machine in the spec to wait for the + * initial IBF. + */ + KCS_START_OP, + + /* We have written a write cmd to the interface. */ + KCS_WAIT_WRITE_START, + + /* We are writing bytes to the interface. */ + KCS_WAIT_WRITE, + + /* + * We have written the write end cmd to the interface, and + * still need to write the last byte. + */ + KCS_WAIT_WRITE_END, + + /* We are waiting to read data from the interface. */ + KCS_WAIT_READ, + + /* + * State to transition to the error handler, this was added to + * the state machine in the spec to be sure IBF was there. + */ + KCS_ERROR0, + + /* + * First stage error handler, wait for the interface to + * respond. + */ + KCS_ERROR1, + + /* + * The abort cmd has been written, wait for the interface to + * respond. + */ + KCS_ERROR2, + + /* + * We wrote some data to the interface, wait for it to switch + * to read mode. + */ + KCS_ERROR3, + + /* The hardware failed to follow the state machine. */ + KCS_HOSED }; #define MAX_KCS_READ_SIZE IPMI_MAX_MSG_LENGTH @@ -102,8 +123,7 @@ enum kcs_states { #define MAX_ERROR_RETRIES 10 #define ERROR0_OBF_WAIT_JIFFIES (2*HZ) -struct si_sm_data -{ +struct si_sm_data { enum kcs_states state; struct si_sm_io *io; unsigned char write_data[MAX_KCS_WRITE_SIZE]; @@ -187,7 +207,8 @@ static inline void start_error_recovery(struct si_sm_data *kcs, char *reason) (kcs->error_retries)++; if (kcs->error_retries > MAX_ERROR_RETRIES) { if (kcs_debug & KCS_DEBUG_ENABLE) - printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", reason); + printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", + reason); kcs->state = KCS_HOSED; } else { kcs->error0_timeout = jiffies + ERROR0_OBF_WAIT_JIFFIES; @@ -271,10 +292,9 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data, if (kcs_debug & KCS_DEBUG_MSG) { printk(KERN_DEBUG "start_kcs_transaction -"); - for (i = 0; i < size; i ++) { + for (i = 0; i < size; i++) printk(" %02x", (unsigned char) (data [i])); - } - printk ("\n"); + printk("\n"); } kcs->error_retries = 0; memcpy(kcs->write_data, data, size); @@ -305,9 +325,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data, kcs->read_pos = 3; } if (kcs->truncated) { - /* Report a truncated error. We might overwrite - another error, but that's too bad, the user needs - to know it was truncated. */ + /* + * Report a truncated error. We might overwrite + * another error, but that's too bad, the user needs + * to know it was truncated. + */ data[2] = IPMI_ERR_MSG_TRUNCATED; kcs->truncated = 0; } @@ -315,9 +337,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data, return kcs->read_pos; } -/* This implements the state machine defined in the IPMI manual, see - that for details on how this works. Divide that flowchart into - sections delimited by "Wait for IBF" and this will become clear. */ +/* + * This implements the state machine defined in the IPMI manual, see + * that for details on how this works. Divide that flowchart into + * sections delimited by "Wait for IBF" and this will become clear. + */ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) { unsigned char status; @@ -388,11 +412,12 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) write_next_byte(kcs); } break; - + case KCS_WAIT_WRITE_END: if (state != KCS_WRITE_STATE) { start_error_recovery(kcs, - "Not in write state for write end"); + "Not in write state" + " for write end"); break; } clear_obf(kcs, status); @@ -413,13 +438,15 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) return SI_SM_CALL_WITH_DELAY; read_next_byte(kcs); } else { - /* We don't implement this exactly like the state - machine in the spec. Some broken hardware - does not write the final dummy byte to the - read register. Thus obf will never go high - here. We just go straight to idle, and we - handle clearing out obf in idle state if it - happens to come in. */ + /* + * We don't implement this exactly like the state + * machine in the spec. Some broken hardware + * does not write the final dummy byte to the + * read register. Thus obf will never go high + * here. We just go straight to idle, and we + * handle clearing out obf in idle state if it + * happens to come in. + */ clear_obf(kcs, status); kcs->orig_write_count = 0; kcs->state = KCS_IDLE; @@ -430,7 +457,8 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) case KCS_ERROR0: clear_obf(kcs, status); status = read_status(kcs); - if (GET_STATUS_OBF(status)) /* controller isn't responding */ + if (GET_STATUS_OBF(status)) + /* controller isn't responding */ if (time_before(jiffies, kcs->error0_timeout)) return SI_SM_CALL_WITH_TICK_DELAY; write_cmd(kcs, KCS_GET_STATUS_ABORT); @@ -442,7 +470,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) write_data(kcs, 0); kcs->state = KCS_ERROR2; break; - + case KCS_ERROR2: if (state != KCS_READ_STATE) { start_error_recovery(kcs, @@ -456,7 +484,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) write_data(kcs, KCS_READ_BYTE); kcs->state = KCS_ERROR3; break; - + case KCS_ERROR3: if (state != KCS_IDLE_STATE) { start_error_recovery(kcs, @@ -475,7 +503,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) return SI_SM_TRANSACTION_COMPLETE; } break; - + case KCS_HOSED: break; } @@ -495,10 +523,12 @@ static int kcs_size(void) static int kcs_detect(struct si_sm_data *kcs) { - /* It's impossible for the KCS status register to be all 1's, - (assuming a properly functioning, self-initialized BMC) - but that's what you get from reading a bogus address, so we - test that first. */ + /* + * It's impossible for the KCS status register to be all 1's, + * (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. + */ if (read_status(kcs) == 0xff) return 1; @@ -509,8 +539,7 @@ static void kcs_cleanup(struct si_sm_data *kcs) { } -struct si_sm_handlers kcs_smi_handlers = -{ +struct si_sm_handlers kcs_smi_handlers = { .init_data = init_kcs_data, .start_transaction = start_kcs_transaction, .get_result = get_kcs_result, diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index ba7e75b731c..97b6225c070 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -80,7 +80,7 @@ #define SI_USEC_PER_JIFFY (1000000/HZ) #define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY) #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a - short timeout */ + short timeout */ /* Bit for BMC global enables. */ #define IPMI_BMC_RCV_MSG_INTR 0x01 @@ -114,8 +114,7 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = -{ +static struct device_driver ipmi_driver = { .name = DEVICE_NAME, .bus = &platform_bus_type }; @@ -169,8 +168,7 @@ enum si_stat_indexes { SI_NUM_STATS }; -struct smi_info -{ +struct smi_info { int intf_num; ipmi_smi_t intf; struct si_sm_data *si_sm; @@ -183,8 +181,10 @@ struct smi_info struct ipmi_smi_msg *curr_msg; enum si_intf_state si_state; - /* Used to handle the various types of I/O that can occur with - IPMI */ + /* + * Used to handle the various types of I/O that can occur with + * IPMI + */ struct si_sm_io io; int (*io_setup)(struct smi_info *info); void (*io_cleanup)(struct smi_info *info); @@ -195,15 +195,18 @@ struct smi_info void (*addr_source_cleanup)(struct smi_info *info); void *addr_source_data; - /* Per-OEM handler, called from handle_flags(). - Returns 1 when handle_flags() needs to be re-run - or 0 indicating it set si_state itself. - */ + /* + * Per-OEM handler, called from handle_flags(). Returns 1 + * when handle_flags() needs to be re-run or 0 indicating it + * set si_state itself. + */ int (*oem_data_avail_handler)(struct smi_info *smi_info); - /* Flags from the last GET_MSG_FLAGS command, used when an ATTN - is set to hold the flags until we are done handling everything - from the flags. */ + /* + * Flags from the last GET_MSG_FLAGS command, used when an ATTN + * is set to hold the flags until we are done handling everything + * from the flags. + */ #define RECEIVE_MSG_AVAIL 0x01 #define EVENT_MSG_BUFFER_FULL 0x02 #define WDT_PRE_TIMEOUT_INT 0x08 @@ -211,25 +214,31 @@ struct smi_info #define OEM1_DATA_AVAIL 0x40 #define OEM2_DATA_AVAIL 0x80 #define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \ - OEM1_DATA_AVAIL | \ - OEM2_DATA_AVAIL) + OEM1_DATA_AVAIL | \ + OEM2_DATA_AVAIL) unsigned char msg_flags; - /* If set to true, this will request events the next time the - state machine is idle. */ + /* + * If set to true, this will request events the next time the + * state machine is idle. + */ atomic_t req_events; - /* If true, run the state machine to completion on every send - call. Generally used after a panic to make sure stuff goes - out. */ + /* + * If true, run the state machine to completion on every send + * call. Generally used after a panic to make sure stuff goes + * out. + */ int run_to_completion; /* The I/O port of an SI interface. */ int port; - /* The space between start addresses of the two ports. For - instance, if the first port is 0xca2 and the spacing is 4, then - the second port is 0xca6. */ + /* + * The space between start addresses of the two ports. For + * instance, if the first port is 0xca2 and the spacing is 4, then + * the second port is 0xca6. + */ unsigned int spacing; /* zero if no irq; */ @@ -244,10 +253,12 @@ struct smi_info /* Used to gracefully stop the timer without race conditions. */ atomic_t stop_operation; - /* The driver will disable interrupts when it gets into a - situation where it cannot handle messages due to lack of - memory. Once that situation clears up, it will re-enable - interrupts. */ + /* + * The driver will disable interrupts when it gets into a + * situation where it cannot handle messages due to lack of + * memory. Once that situation clears up, it will re-enable + * interrupts. + */ int interrupt_disabled; /* From the get device id response... */ @@ -257,8 +268,10 @@ struct smi_info struct device *dev; struct platform_device *pdev; - /* True if we allocated the device, false if it came from - * someplace else (like PCI). */ + /* + * True if we allocated the device, false if it came from + * someplace else (like PCI). + */ int dev_registered; /* Slave address, could be reported from DMI. */ @@ -267,7 +280,7 @@ struct smi_info /* Counters and things for the proc filesystem. */ atomic_t stats[SI_NUM_STATS]; - struct task_struct *thread; + struct task_struct *thread; struct list_head link; }; @@ -288,7 +301,7 @@ static int try_smi_init(struct smi_info *smi); static void cleanup_one_si(struct smi_info *to_clean); static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list); -static int register_xaction_notifier(struct notifier_block * nb) +static int register_xaction_notifier(struct notifier_block *nb) { return atomic_notifier_chain_register(&xaction_notifier_list, nb); } @@ -297,7 +310,7 @@ static void deliver_recv_msg(struct smi_info *smi_info, struct ipmi_smi_msg *msg) { /* Deliver the message to the upper layer with the lock - released. */ + released. */ spin_unlock(&(smi_info->si_lock)); ipmi_smi_msg_received(smi_info->intf, msg); spin_lock(&(smi_info->si_lock)); @@ -329,8 +342,10 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) struct timeval t; #endif - /* No need to save flags, we aleady have interrupts off and we - already hold the SMI lock. */ + /* + * No need to save flags, we aleady have interrupts off and we + * already hold the SMI lock. + */ if (!smi_info->run_to_completion) spin_lock(&(smi_info->msg_lock)); @@ -353,7 +368,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) link); #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif err = atomic_notifier_call_chain(&xaction_notifier_list, 0, smi_info); @@ -365,13 +380,12 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) smi_info->si_sm, smi_info->curr_msg->data, smi_info->curr_msg->data_size); - if (err) { + if (err) return_hosed_msg(smi_info, err); - } rv = SI_SM_CALL_WITHOUT_DELAY; } - out: + out: if (!smi_info->run_to_completion) spin_unlock(&(smi_info->msg_lock)); @@ -382,8 +396,10 @@ static void start_enable_irq(struct smi_info *smi_info) { unsigned char msg[2]; - /* If we are enabling interrupts, we have to tell the - BMC to use them. */ + /* + * If we are enabling interrupts, we have to tell the + * BMC to use them. + */ msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; @@ -415,10 +431,12 @@ static void start_clear_flags(struct smi_info *smi_info) smi_info->si_state = SI_CLEARING_FLAGS; } -/* When we have a situtaion where we run out of memory and cannot - allocate messages, we just leave them in the BMC and run the system - polled until we can allocate some memory. Once we have some - memory, we will re-enable the interrupt. */ +/* + * When we have a situtaion where we run out of memory and cannot + * allocate messages, we just leave them in the BMC and run the system + * polled until we can allocate some memory. Once we have some + * memory, we will re-enable the interrupt. + */ static inline void disable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { @@ -486,12 +504,11 @@ static void handle_flags(struct smi_info *smi_info) smi_info->curr_msg->data_size); smi_info->si_state = SI_GETTING_EVENTS; } else if (smi_info->msg_flags & OEM_DATA_AVAIL && - smi_info->oem_data_avail_handler) { + smi_info->oem_data_avail_handler) { if (smi_info->oem_data_avail_handler(smi_info)) goto retry; - } else { + } else smi_info->si_state = SI_NORMAL; - } } static void handle_transaction_done(struct smi_info *smi_info) @@ -501,7 +518,7 @@ static void handle_transaction_done(struct smi_info *smi_info) struct timeval t; do_gettimeofday(&t); - printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif switch (smi_info->si_state) { case SI_NORMAL: @@ -514,9 +531,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; deliver_recv_msg(smi_info, msg); @@ -530,12 +549,13 @@ static void handle_transaction_done(struct smi_info *smi_info) /* We got the flags from the SMI, now handle them. */ len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4); if (msg[2] != 0) { - /* Error fetching flags, just give up for - now. */ + /* Error fetching flags, just give up for now. */ smi_info->si_state = SI_NORMAL; } else if (len < 4) { - /* Hmm, no flags. That's technically illegal, but - don't use uninitialized data. */ + /* + * Hmm, no flags. That's technically illegal, but + * don't use uninitialized data. + */ smi_info->si_state = SI_NORMAL; } else { smi_info->msg_flags = msg[3]; @@ -572,9 +592,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; if (msg->rsp[2] != 0) { @@ -587,10 +609,12 @@ static void handle_transaction_done(struct smi_info *smi_info) } else { smi_inc_stat(smi_info, events); - /* Do this before we deliver the message - because delivering the message releases the - lock and something else can mess with the - state. */ + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ handle_flags(smi_info); deliver_recv_msg(smi_info, msg); @@ -606,9 +630,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; if (msg->rsp[2] != 0) { @@ -621,10 +647,12 @@ static void handle_transaction_done(struct smi_info *smi_info) } else { smi_inc_stat(smi_info, incoming_messages); - /* Do this before we deliver the message - because delivering the message releases the - lock and something else can mess with the - state. */ + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ handle_flags(smi_info); deliver_recv_msg(smi_info, msg); @@ -712,46 +740,49 @@ static void handle_transaction_done(struct smi_info *smi_info) } } -/* Called on timeouts and events. Timeouts should pass the elapsed - time, interrupts should pass in zero. Must be called with - si_lock held and interrupts disabled. */ +/* + * Called on timeouts and events. Timeouts should pass the elapsed + * time, interrupts should pass in zero. Must be called with + * si_lock held and interrupts disabled. + */ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, int time) { enum si_sm_result si_sm_result; restart: - /* There used to be a loop here that waited a little while - (around 25us) before giving up. That turned out to be - pointless, the minimum delays I was seeing were in the 300us - range, which is far too long to wait in an interrupt. So - we just run until the state machine tells us something - happened or it needs a delay. */ + /* + * There used to be a loop here that waited a little while + * (around 25us) before giving up. That turned out to be + * pointless, the minimum delays I was seeing were in the 300us + * range, which is far too long to wait in an interrupt. So + * we just run until the state machine tells us something + * happened or it needs a delay. + */ si_sm_result = smi_info->handlers->event(smi_info->si_sm, time); time = 0; while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY) - { si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); - } - if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) - { + if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) { smi_inc_stat(smi_info, complete_transactions); handle_transaction_done(smi_info); si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); - } - else if (si_sm_result == SI_SM_HOSED) - { + } else if (si_sm_result == SI_SM_HOSED) { smi_inc_stat(smi_info, hosed_count); - /* Do the before return_hosed_msg, because that - releases the lock. */ + /* + * Do the before return_hosed_msg, because that + * releases the lock. + */ smi_info->si_state = SI_NORMAL; if (smi_info->curr_msg != NULL) { - /* If we were handling a user message, format - a response to send to the upper layer to - tell it about the error. */ + /* + * If we were handling a user message, format + * a response to send to the upper layer to + * tell it about the error. + */ return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED); } si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); @@ -761,17 +792,18 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, * We prefer handling attn over new messages. But don't do * this if there is not yet an upper layer to handle anything. */ - if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) - { + if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) { unsigned char msg[2]; smi_inc_stat(smi_info, attentions); - /* Got a attn, send down a get message flags to see - what's causing it. It would be better to handle - this in the upper layer, but due to the way - interrupts work with the SMI, that's not really - possible. */ + /* + * Got a attn, send down a get message flags to see + * what's causing it. It would be better to handle + * this in the upper layer, but due to the way + * interrupts work with the SMI, that's not really + * possible. + */ msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_GET_MSG_FLAGS_CMD; @@ -788,13 +820,14 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, si_sm_result = start_next_msg(smi_info); if (si_sm_result != SI_SM_IDLE) goto restart; - } + } if ((si_sm_result == SI_SM_IDLE) - && (atomic_read(&smi_info->req_events))) - { - /* We are idle and the upper layer requested that I fetch - events, so do so. */ + && (atomic_read(&smi_info->req_events))) { + /* + * We are idle and the upper layer requested that I fetch + * events, so do so. + */ atomic_set(&smi_info->req_events, 0); smi_info->curr_msg = ipmi_alloc_smi_msg(); @@ -871,11 +904,8 @@ static void sender(void *send_info, spin_unlock_irqrestore(&smi_info->msg_lock, flags); spin_lock_irqsave(&smi_info->si_lock, flags); - if ((smi_info->si_state == SI_NORMAL) - && (smi_info->curr_msg == NULL)) - { + if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) start_next_msg(smi_info); - } spin_unlock_irqrestore(&smi_info->si_lock, flags); } @@ -906,9 +936,8 @@ static int ipmi_thread(void *data) spin_lock_irqsave(&(smi_info->si_lock), flags); smi_result = smi_event_handler(smi_info, 0); spin_unlock_irqrestore(&(smi_info->si_lock), flags); - if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { - /* do nothing */ - } + if (smi_result == SI_SM_CALL_WITHOUT_DELAY) + ; /* do nothing */ else if (smi_result == SI_SM_CALL_WITH_DELAY) schedule(); else @@ -959,7 +988,7 @@ static void smi_timeout(unsigned long data) spin_lock_irqsave(&(smi_info->si_lock), flags); #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif jiffies_now = jiffies; time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies) @@ -977,8 +1006,10 @@ static void smi_timeout(unsigned long data) goto do_add_timer; } - /* If the state machine asks for a short delay, then shorten - the timer timeout. */ + /* + * If the state machine asks for a short delay, then shorten + * the timer timeout. + */ if (smi_result == SI_SM_CALL_WITH_DELAY) { smi_inc_stat(smi_info, short_timeouts); smi_info->si_timer.expires = jiffies + 1; @@ -1005,7 +1036,7 @@ static irqreturn_t si_irq_handler(int irq, void *data) #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif smi_event_handler(smi_info, 0); spin_unlock_irqrestore(&(smi_info->si_lock), flags); @@ -1048,7 +1079,7 @@ static int smi_start_processing(void *send_info, * The BT interface is efficient enough to not need a thread, * and there is no need for a thread if we have interrupts. */ - else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) + else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) enable = 1; if (enable) { @@ -1074,8 +1105,7 @@ static void set_maintenance_mode(void *send_info, int enable) atomic_set(&smi_info->req_events, 0); } -static struct ipmi_smi_handlers handlers = -{ +static struct ipmi_smi_handlers handlers = { .owner = THIS_MODULE, .start_processing = smi_start_processing, .sender = sender, @@ -1085,8 +1115,10 @@ static struct ipmi_smi_handlers handlers = .poll = poll, }; -/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses, - a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */ +/* + * There can be 4 IO ports passed in (with or without IRQs), 4 addresses, + * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS. + */ static LIST_HEAD(smi_infos); static DEFINE_MUTEX(smi_infos_lock); @@ -1277,10 +1309,9 @@ static void port_cleanup(struct smi_info *info) int idx; if (addr) { - for (idx = 0; idx < info->io_size; idx++) { + for (idx = 0; idx < info->io_size; idx++) release_region(addr + idx * info->io.regspacing, info->io.regsize); - } } } @@ -1294,8 +1325,10 @@ static int port_setup(struct smi_info *info) info->io_cleanup = port_cleanup; - /* Figure out the actual inb/inw/inl/etc routine to use based - upon the register size. */ + /* + * Figure out the actual inb/inw/inl/etc routine to use based + * upon the register size. + */ switch (info->io.regsize) { case 1: info->io.inputb = port_inb; @@ -1310,17 +1343,18 @@ static int port_setup(struct smi_info *info) info->io.outputb = port_outl; break; default: - printk("ipmi_si: Invalid register size: %d\n", + printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n", info->io.regsize); return -EINVAL; } - /* Some BIOSes reserve disjoint I/O regions in their ACPI + /* + * Some BIOSes reserve disjoint I/O regions in their ACPI * tables. This causes problems when trying to register the * entire I/O region. Therefore we must register each I/O * port separately. */ - for (idx = 0; idx < info->io_size; idx++) { + for (idx = 0; idx < info->io_size; idx++) { if (request_region(addr + idx * info->io.regspacing, info->io.regsize, DEVICE_NAME) == NULL) { /* Undo allocations */ @@ -1408,8 +1442,10 @@ static int mem_setup(struct smi_info *info) info->io_cleanup = mem_cleanup; - /* Figure out the actual readb/readw/readl/etc routine to use based - upon the register size. */ + /* + * Figure out the actual readb/readw/readl/etc routine to use based + * upon the register size. + */ switch (info->io.regsize) { case 1: info->io.inputb = intf_mem_inb; @@ -1430,16 +1466,18 @@ static int mem_setup(struct smi_info *info) break; #endif default: - printk("ipmi_si: Invalid register size: %d\n", + printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n", info->io.regsize); return -EINVAL; } - /* Calculate the total amount of memory to claim. This is an + /* + * Calculate the total amount of memory to claim. This is an * unusual looking calculation, but it avoids claiming any * more memory than it has to. It will claim everything * between the first address to the end of the last full - * register. */ + * register. + */ mapsize = ((info->io_size * info->io.regspacing) - (info->io.regspacing - info->io.regsize)); @@ -1769,9 +1807,11 @@ static __devinit void hardcode_find_bmc(void) #include <linux/acpi.h> -/* Once we get an ACPI failure, we don't try any more, because we go - through the tables sequentially. Once we don't find a table, there - are no more. */ +/* + * Once we get an ACPI failure, we don't try any more, because we go + * through the tables sequentially. Once we don't find a table, there + * are no more. + */ static int acpi_failure; /* For GPE-type interrupts. */ @@ -1834,7 +1874,8 @@ static int acpi_gpe_irq_setup(struct smi_info *info) /* * Defined at - * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf + * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/ + * Docs/TechPapers/IA64/hpspmi.pdf */ struct SPMITable { s8 Signature[4]; @@ -1856,14 +1897,18 @@ struct SPMITable { */ u8 InterruptType; - /* If bit 0 of InterruptType is set, then this is the SCI - interrupt in the GPEx_STS register. */ + /* + * If bit 0 of InterruptType is set, then this is the SCI + * interrupt in the GPEx_STS register. + */ u8 GPE; s16 Reserved; - /* If bit 1 of InterruptType is set, then this is the I/O - APIC/SAPIC interrupt. */ + /* + * If bit 1 of InterruptType is set, then this is the I/O + * APIC/SAPIC interrupt. + */ u32 GlobalSystemInterrupt; /* The actual register address. */ @@ -1881,7 +1926,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) if (spmi->IPMIlegacy != 1) { printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy); - return -ENODEV; + return -ENODEV; } if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) @@ -1898,8 +1943,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) info->addr_source = "ACPI"; /* Figure out the interface type. */ - switch (spmi->InterfaceType) - { + switch (spmi->InterfaceType) { case 1: /* KCS */ info->si_type = SI_KCS; break; @@ -1947,7 +1991,8 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) info->io.addr_type = IPMI_IO_ADDR_SPACE; } else { kfree(info); - printk("ipmi_si: Unknown ACPI I/O Address type\n"); + printk(KERN_WARNING + "ipmi_si: Unknown ACPI I/O Address type\n"); return -EIO; } info->io.addr_data = spmi->addr.address; @@ -1981,8 +2026,7 @@ static __devinit void acpi_find_bmc(void) #endif #ifdef CONFIG_DMI -struct dmi_ipmi_data -{ +struct dmi_ipmi_data { u8 type; u8 addr_space; unsigned long base_addr; @@ -2007,11 +2051,10 @@ static int __devinit decode_dmi(const struct dmi_header *dm, /* I/O */ base_addr &= 0xFFFE; dmi->addr_space = IPMI_IO_ADDR_SPACE; - } - else { + } else /* Memory */ dmi->addr_space = IPMI_MEM_ADDR_SPACE; - } + /* If bit 4 of byte 0x10 is set, then the lsb for the address is odd. */ dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); @@ -2020,7 +2063,7 @@ static int __devinit decode_dmi(const struct dmi_header *dm, /* The top two bits of byte 0x10 hold the register spacing. */ reg_spacing = (data[0x10] & 0xC0) >> 6; - switch(reg_spacing){ + switch (reg_spacing) { case 0x00: /* Byte boundaries */ dmi->offset = 1; break; @@ -2036,12 +2079,14 @@ static int __devinit decode_dmi(const struct dmi_header *dm, } } else { /* Old DMI spec. */ - /* Note that technically, the lower bit of the base + /* + * Note that technically, the lower bit of the base * address should be 1 if the address is I/O and 0 if * the address is in memory. So many systems get that * wrong (and all that I have seen are I/O) so we just * ignore that bit and assume I/O. Systems that use - * memory should use the newer spec, anyway. */ + * memory should use the newer spec, anyway. + */ dmi->base_addr = base_addr & 0xfffe; dmi->addr_space = IPMI_IO_ADDR_SPACE; dmi->offset = 1; @@ -2248,13 +2293,13 @@ static struct pci_device_id ipmi_pci_devices[] = { MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); static struct pci_driver ipmi_pci_driver = { - .name = DEVICE_NAME, - .id_table = ipmi_pci_devices, - .probe = ipmi_pci_probe, - .remove = __devexit_p(ipmi_pci_remove), + .name = DEVICE_NAME, + .id_table = ipmi_pci_devices, + .probe = ipmi_pci_probe, + .remove = __devexit_p(ipmi_pci_remove), #ifdef CONFIG_PM - .suspend = ipmi_pci_suspend, - .resume = ipmi_pci_resume, + .suspend = ipmi_pci_suspend, + .resume = ipmi_pci_resume, #endif }; #endif /* CONFIG_PCI */ @@ -2324,7 +2369,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev, info->io.addr_data, info->io.regsize, info->io.regspacing, info->irq); - dev->dev.driver_data = (void*) info; + dev->dev.driver_data = (void *) info; return try_smi_init(info); } @@ -2337,14 +2382,16 @@ static int __devexit ipmi_of_remove(struct of_device *dev) static struct of_device_id ipmi_match[] = { - { .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS }, - { .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC }, - { .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT }, + { .type = "ipmi", .compatible = "ipmi-kcs", + .data = (void *)(unsigned long) SI_KCS }, + { .type = "ipmi", .compatible = "ipmi-smic", + .data = (void *)(unsigned long) SI_SMIC }, + { .type = "ipmi", .compatible = "ipmi-bt", + .data = (void *)(unsigned long) SI_BT }, {}, }; -static struct of_platform_driver ipmi_of_platform_driver = -{ +static struct of_platform_driver ipmi_of_platform_driver = { .name = "ipmi", .match_table = ipmi_match, .probe = ipmi_of_probe, @@ -2365,32 +2412,32 @@ static int try_get_dev_id(struct smi_info *smi_info) if (!resp) return -ENOMEM; - /* Do a Get Device ID command, since it comes back with some - useful info. */ + /* + * Do a Get Device ID command, since it comes back with some + * useful info. + */ msg[0] = IPMI_NETFN_APP_REQUEST << 2; msg[1] = IPMI_GET_DEVICE_ID_CMD; smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); smi_result = smi_info->handlers->event(smi_info->si_sm, 0); - for (;;) - { + for (;;) { if (smi_result == SI_SM_CALL_WITH_DELAY || smi_result == SI_SM_CALL_WITH_TICK_DELAY) { schedule_timeout_uninterruptible(1); smi_result = smi_info->handlers->event( smi_info->si_sm, 100); - } - else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) - { + } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { smi_result = smi_info->handlers->event( smi_info->si_sm, 0); - } - else + } else break; } if (smi_result == SI_SM_HOSED) { - /* We couldn't get the state machine to run, so whatever's at - the port is probably not an IPMI SMI interface. */ + /* + * We couldn't get the state machine to run, so whatever's at + * the port is probably not an IPMI SMI interface. + */ rv = -ENODEV; goto out; } @@ -2476,7 +2523,7 @@ static int param_read_proc(char *page, char **start, off_t off, static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info) { smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) | - RECEIVE_MSG_AVAIL); + RECEIVE_MSG_AVAIL); return 1; } @@ -2518,10 +2565,9 @@ static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info) id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) { smi_info->oem_data_avail_handler = oem_data_avail_to_receive_msg_avail; - } - else if (ipmi_version_major(id) < 1 || - (ipmi_version_major(id) == 1 && - ipmi_version_minor(id) < 5)) { + } else if (ipmi_version_major(id) < 1 || + (ipmi_version_major(id) == 1 && + ipmi_version_minor(id) < 5)) { smi_info->oem_data_avail_handler = oem_data_avail_to_receive_msg_avail; } @@ -2613,8 +2659,10 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { if (smi_info->intf) { - /* The timer and thread are only running if the - interface has been started up and registered. */ + /* + * The timer and thread are only running if the + * interface has been started up and registered. + */ if (smi_info->thread != NULL) kthread_stop(smi_info->thread); del_timer_sync(&smi_info->si_timer); @@ -2739,7 +2787,7 @@ static int try_smi_init(struct smi_info *new_smi) /* Allocate the state machine's data and initialize it. */ new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); if (!new_smi->si_sm) { - printk(" Could not allocate state machine memory\n"); + printk(KERN_ERR "Could not allocate state machine memory\n"); rv = -ENOMEM; goto out_err; } @@ -2749,7 +2797,7 @@ static int try_smi_init(struct smi_info *new_smi) /* Now that we know the I/O size, we can set up the I/O. */ rv = new_smi->io_setup(new_smi); if (rv) { - printk(" Could not set up I/O space\n"); + printk(KERN_ERR "Could not set up I/O space\n"); goto out_err; } @@ -2765,8 +2813,10 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } - /* Attempt a get device id command. If it fails, we probably - don't have a BMC here. */ + /* + * Attempt a get device id command. If it fails, we probably + * don't have a BMC here. + */ rv = try_get_dev_id(new_smi); if (rv) { if (new_smi->addr_source) @@ -2791,16 +2841,20 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->intf_num = smi_num; smi_num++; - /* Start clearing the flags before we enable interrupts or the - timer to avoid racing with the timer. */ + /* + * Start clearing the flags before we enable interrupts or the + * timer to avoid racing with the timer. + */ start_clear_flags(new_smi); /* IRQ is defined to be set when non-zero. */ if (new_smi->irq) new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ; if (!new_smi->dev) { - /* If we don't already have a device from something - * else (like PCI), then register a new one. */ + /* + * If we don't already have a device from something + * else (like PCI), then register a new one. + */ new_smi->pdev = platform_device_alloc("ipmi_si", new_smi->intf_num); if (rv) { @@ -2871,7 +2925,8 @@ static int try_smi_init(struct smi_info *new_smi) mutex_unlock(&smi_infos_lock); - printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]); + printk(KERN_INFO "IPMI %s interface initialized\n", + si_to_str[new_smi->si_type]); return 0; @@ -2886,9 +2941,11 @@ static int try_smi_init(struct smi_info *new_smi) if (new_smi->irq_cleanup) new_smi->irq_cleanup(new_smi); - /* Wait until we know that we are out of any interrupt - handlers might have been running before we freed the - interrupt. */ + /* + * Wait until we know that we are out of any interrupt + * handlers might have been running before we freed the + * interrupt. + */ synchronize_sched(); if (new_smi->si_sm) { @@ -2960,11 +3017,10 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PCI rv = pci_register_driver(&ipmi_pci_driver); - if (rv){ + if (rv) printk(KERN_ERR "init_ipmi_si: Unable to register PCI driver: %d\n", rv); - } #endif #ifdef CONFIG_PPC_OF @@ -2993,7 +3049,8 @@ static __devinit int init_ipmi_si(void) of_unregister_platform_driver(&ipmi_of_platform_driver); #endif driver_unregister(&ipmi_driver); - printk("ipmi_si: Unable to find any System Interface(s)\n"); + printk(KERN_WARNING + "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; } else { mutex_unlock(&smi_infos_lock); @@ -3015,13 +3072,17 @@ static void cleanup_one_si(struct smi_info *to_clean) /* Tell the driver that we are shutting down. */ atomic_inc(&to_clean->stop_operation); - /* Make sure the timer and thread are stopped and will not run - again. */ + /* + * Make sure the timer and thread are stopped and will not run + * again. + */ wait_for_timer_and_thread(to_clean); - /* Timeouts are stopped, now make sure the interrupts are off - for the device. A little tricky with locks to make sure - there are no races. */ + /* + * Timeouts are stopped, now make sure the interrupts are off + * for the device. A little tricky with locks to make sure + * there are no races. + */ spin_lock_irqsave(&to_clean->si_lock, flags); while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { spin_unlock_irqrestore(&to_clean->si_lock, flags); @@ -3092,4 +3153,5 @@ module_exit(cleanup_ipmi_si); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); -MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces."); +MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT" + " system interfaces."); diff --git a/drivers/char/ipmi/ipmi_si_sm.h b/drivers/char/ipmi/ipmi_si_sm.h index 4b731b24dc1..df89f73475f 100644 --- a/drivers/char/ipmi/ipmi_si_sm.h +++ b/drivers/char/ipmi/ipmi_si_sm.h @@ -34,22 +34,27 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* This is defined by the state machines themselves, it is an opaque - data type for them to use. */ +/* + * This is defined by the state machines themselves, it is an opaque + * data type for them to use. + */ struct si_sm_data; -/* The structure for doing I/O in the state machine. The state - machine doesn't have the actual I/O routines, they are done through - this interface. */ -struct si_sm_io -{ +/* + * The structure for doing I/O in the state machine. The state + * machine doesn't have the actual I/O routines, they are done through + * this interface. + */ +struct si_sm_io { unsigned char (*inputb)(struct si_sm_io *io, unsigned int offset); void (*outputb)(struct si_sm_io *io, unsigned int offset, unsigned char b); - /* Generic info used by the actual handling routines, the - state machine shouldn't touch these. */ + /* + * Generic info used by the actual handling routines, the + * state machine shouldn't touch these. + */ void __iomem *addr; int regspacing; int regsize; @@ -59,53 +64,67 @@ struct si_sm_io }; /* Results of SMI events. */ -enum si_sm_result -{ +enum si_sm_result { SI_SM_CALL_WITHOUT_DELAY, /* Call the driver again immediately */ SI_SM_CALL_WITH_DELAY, /* Delay some before calling again. */ - SI_SM_CALL_WITH_TICK_DELAY, /* Delay at least 1 tick before calling again. */ + SI_SM_CALL_WITH_TICK_DELAY,/* Delay >=1 tick before calling again. */ SI_SM_TRANSACTION_COMPLETE, /* A transaction is finished. */ SI_SM_IDLE, /* The SM is in idle state. */ SI_SM_HOSED, /* The hardware violated the state machine. */ - SI_SM_ATTN /* The hardware is asserting attn and the - state machine is idle. */ + + /* + * The hardware is asserting attn and the state machine is + * idle. + */ + SI_SM_ATTN }; /* Handlers for the SMI state machine. */ -struct si_sm_handlers -{ - /* Put the version number of the state machine here so the - upper layer can print it. */ +struct si_sm_handlers { + /* + * Put the version number of the state machine here so the + * upper layer can print it. + */ char *version; - /* Initialize the data and return the amount of I/O space to - reserve for the space. */ + /* + * Initialize the data and return the amount of I/O space to + * reserve for the space. + */ unsigned int (*init_data)(struct si_sm_data *smi, struct si_sm_io *io); - /* Start a new transaction in the state machine. This will - return -2 if the state machine is not idle, -1 if the size - is invalid (to large or too small), or 0 if the transaction - is successfully completed. */ + /* + * Start a new transaction in the state machine. This will + * return -2 if the state machine is not idle, -1 if the size + * is invalid (to large or too small), or 0 if the transaction + * is successfully completed. + */ int (*start_transaction)(struct si_sm_data *smi, unsigned char *data, unsigned int size); - /* Return the results after the transaction. This will return - -1 if the buffer is too small, zero if no transaction is - present, or the actual length of the result data. */ + /* + * Return the results after the transaction. This will return + * -1 if the buffer is too small, zero if no transaction is + * present, or the actual length of the result data. + */ int (*get_result)(struct si_sm_data *smi, unsigned char *data, unsigned int length); - /* Call this periodically (for a polled interface) or upon - receiving an interrupt (for a interrupt-driven interface). - If interrupt driven, you should probably poll this - periodically when not in idle state. This should be called - with the time that passed since the last call, if it is - significant. Time is in microseconds. */ + /* + * Call this periodically (for a polled interface) or upon + * receiving an interrupt (for a interrupt-driven interface). + * If interrupt driven, you should probably poll this + * periodically when not in idle state. This should be called + * with the time that passed since the last call, if it is + * significant. Time is in microseconds. + */ enum si_sm_result (*event)(struct si_sm_data *smi, long time); - /* Attempt to detect an SMI. Returns 0 on success or nonzero - on failure. */ + /* + * Attempt to detect an SMI. Returns 0 on success or nonzero + * on failure. + */ int (*detect)(struct si_sm_data *smi); /* The interface is shutting down, so clean it up. */ diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c index e64ea7d25d2..faed9297190 100644 --- a/drivers/char/ipmi/ipmi_smic_sm.c +++ b/drivers/char/ipmi/ipmi_smic_sm.c @@ -85,6 +85,7 @@ enum smic_states { /* SMIC Flags Register Bits */ #define SMIC_RX_DATA_READY 0x80 #define SMIC_TX_DATA_READY 0x40 + /* * SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by * a few systems, and then only by Systems Management @@ -104,23 +105,22 @@ enum smic_states { #define EC_ILLEGAL_COMMAND 0x04 #define EC_BUFFER_FULL 0x05 -struct si_sm_data -{ +struct si_sm_data { enum smic_states state; struct si_sm_io *io; - unsigned char write_data[MAX_SMIC_WRITE_SIZE]; - int write_pos; - int write_count; - int orig_write_count; - unsigned char read_data[MAX_SMIC_READ_SIZE]; - int read_pos; - int truncated; - unsigned int error_retries; - long smic_timeout; + unsigned char write_data[MAX_SMIC_WRITE_SIZE]; + int write_pos; + int write_count; + int orig_write_count; + unsigned char read_data[MAX_SMIC_READ_SIZE]; + int read_pos; + int truncated; + unsigned int error_retries; + long smic_timeout; }; -static unsigned int init_smic_data (struct si_sm_data *smic, - struct si_sm_io *io) +static unsigned int init_smic_data(struct si_sm_data *smic, + struct si_sm_io *io) { smic->state = SMIC_IDLE; smic->io = io; @@ -150,11 +150,10 @@ static int start_smic_transaction(struct si_sm_data *smic, return IPMI_NOT_IN_MY_STATE_ERR; if (smic_debug & SMIC_DEBUG_MSG) { - printk(KERN_INFO "start_smic_transaction -"); - for (i = 0; i < size; i ++) { - printk (" %02x", (unsigned char) (data [i])); - } - printk ("\n"); + printk(KERN_DEBUG "start_smic_transaction -"); + for (i = 0; i < size; i++) + printk(" %02x", (unsigned char) data[i]); + printk("\n"); } smic->error_retries = 0; memcpy(smic->write_data, data, size); @@ -173,11 +172,10 @@ static int smic_get_result(struct si_sm_data *smic, int i; if (smic_debug & SMIC_DEBUG_MSG) { - printk (KERN_INFO "smic_get result -"); - for (i = 0; i < smic->read_pos; i ++) { - printk (" %02x", (smic->read_data [i])); - } - printk ("\n"); + printk(KERN_DEBUG "smic_get result -"); + for (i = 0; i < smic->read_pos; i++) + printk(" %02x", smic->read_data[i]); + printk("\n"); } if (length < smic->read_pos) { smic->read_pos = length; @@ -223,8 +221,8 @@ static inline void write_smic_control(struct si_sm_data *smic, smic->io->outputb(smic->io, 1, control); } -static inline void write_si_sm_data (struct si_sm_data *smic, - unsigned char data) +static inline void write_si_sm_data(struct si_sm_data *smic, + unsigned char data) { smic->io->outputb(smic->io, 0, data); } @@ -233,10 +231,9 @@ static inline void start_error_recovery(struct si_sm_data *smic, char *reason) { (smic->error_retries)++; if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) { - if (smic_debug & SMIC_DEBUG_ENABLE) { + if (smic_debug & SMIC_DEBUG_ENABLE) printk(KERN_WARNING "ipmi_smic_drv: smic hosed: %s\n", reason); - } smic->state = SMIC_HOSED; } else { smic->write_count = smic->orig_write_count; @@ -254,14 +251,14 @@ static inline void write_next_byte(struct si_sm_data *smic) (smic->write_count)--; } -static inline void read_next_byte (struct si_sm_data *smic) +static inline void read_next_byte(struct si_sm_data *smic) { if (smic->read_pos >= MAX_SMIC_READ_SIZE) { - read_smic_data (smic); + read_smic_data(smic); smic->truncated = 1; } else { smic->read_data[smic->read_pos] = read_smic_data(smic); - (smic->read_pos)++; + smic->read_pos++; } } @@ -336,7 +333,7 @@ static inline void read_next_byte (struct si_sm_data *smic) SMIC_SC_SMS_RD_END 0xC6 */ -static enum si_sm_result smic_event (struct si_sm_data *smic, long time) +static enum si_sm_result smic_event(struct si_sm_data *smic, long time) { unsigned char status; unsigned char flags; @@ -347,13 +344,15 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) return SI_SM_HOSED; } if (smic->state != SMIC_IDLE) { - if (smic_debug & SMIC_DEBUG_STATES) { - printk(KERN_INFO + if (smic_debug & SMIC_DEBUG_STATES) + printk(KERN_DEBUG "smic_event - smic->smic_timeout = %ld," " time = %ld\n", smic->smic_timeout, time); - } -/* FIXME: smic_event is sometimes called with time > SMIC_RETRY_TIMEOUT */ + /* + * FIXME: smic_event is sometimes called with time > + * SMIC_RETRY_TIMEOUT + */ if (time < SMIC_RETRY_TIMEOUT) { smic->smic_timeout -= time; if (smic->smic_timeout < 0) { @@ -366,9 +365,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) if (flags & SMIC_FLAG_BSY) return SI_SM_CALL_WITH_DELAY; - status = read_smic_status (smic); + status = read_smic_status(smic); if (smic_debug & SMIC_DEBUG_STATES) - printk(KERN_INFO + printk(KERN_DEBUG "smic_event - state = %d, flags = 0x%02x," " status = 0x%02x\n", smic->state, flags, status); @@ -377,9 +376,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) case SMIC_IDLE: /* in IDLE we check for available messages */ if (flags & SMIC_SMS_DATA_AVAIL) - { return SI_SM_ATTN; - } return SI_SM_IDLE; case SMIC_START_OP: @@ -391,7 +388,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) case SMIC_OP_OK: if (status != SMIC_SC_SMS_READY) { - /* this should not happen */ + /* this should not happen */ start_error_recovery(smic, "state = SMIC_OP_OK," " status != SMIC_SC_SMS_READY"); @@ -411,8 +408,10 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) "status != SMIC_SC_SMS_WR_START"); return SI_SM_CALL_WITH_DELAY; } - /* we must not issue WR_(NEXT|END) unless - TX_DATA_READY is set */ + /* + * we must not issue WR_(NEXT|END) unless + * TX_DATA_READY is set + * */ if (flags & SMIC_TX_DATA_READY) { if (smic->write_count == 1) { /* last byte */ @@ -424,10 +423,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) } write_next_byte(smic); write_smic_flags(smic, flags | SMIC_FLAG_BSY); - } - else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_WRITE_NEXT: @@ -442,52 +439,48 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) if (smic->write_count == 1) { write_smic_control(smic, SMIC_CC_SMS_WR_END); smic->state = SMIC_WRITE_END; - } - else { + } else { write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); smic->state = SMIC_WRITE_NEXT; } write_next_byte(smic); write_smic_flags(smic, flags | SMIC_FLAG_BSY); - } - else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_WRITE_END: if (status != SMIC_SC_SMS_WR_END) { - start_error_recovery (smic, - "state = SMIC_WRITE_END, " - "status != SMIC_SC_SMS_WR_END"); + start_error_recovery(smic, + "state = SMIC_WRITE_END, " + "status != SMIC_SC_SMS_WR_END"); return SI_SM_CALL_WITH_DELAY; } /* data register holds an error code */ data = read_smic_data(smic); if (data != 0) { - if (smic_debug & SMIC_DEBUG_ENABLE) { - printk(KERN_INFO + if (smic_debug & SMIC_DEBUG_ENABLE) + printk(KERN_DEBUG "SMIC_WRITE_END: data = %02x\n", data); - } start_error_recovery(smic, "state = SMIC_WRITE_END, " "data != SUCCESS"); return SI_SM_CALL_WITH_DELAY; - } else { + } else smic->state = SMIC_WRITE2READ; - } break; case SMIC_WRITE2READ: - /* we must wait for RX_DATA_READY to be set before we - can continue */ + /* + * we must wait for RX_DATA_READY to be set before we + * can continue + */ if (flags & SMIC_RX_DATA_READY) { write_smic_control(smic, SMIC_CC_SMS_RD_START); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_START; - } else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_READ_START: @@ -502,15 +495,16 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_NEXT; - } else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_READ_NEXT: switch (status) { - /* smic tells us that this is the last byte to be read - --> clean up */ + /* + * smic tells us that this is the last byte to be read + * --> clean up + */ case SMIC_SC_SMS_RD_END: read_next_byte(smic); write_smic_control(smic, SMIC_CC_SMS_RD_END); @@ -523,9 +517,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_NEXT; - } else { + } else return SI_SM_CALL_WITH_DELAY; - } break; default: start_error_recovery( @@ -546,10 +539,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) data = read_smic_data(smic); /* data register holds an error code */ if (data != 0) { - if (smic_debug & SMIC_DEBUG_ENABLE) { - printk(KERN_INFO + if (smic_debug & SMIC_DEBUG_ENABLE) + printk(KERN_DEBUG "SMIC_READ_END: data = %02x\n", data); - } start_error_recovery(smic, "state = SMIC_READ_END, " "data != SUCCESS"); @@ -565,7 +557,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) default: if (smic_debug & SMIC_DEBUG_ENABLE) { - printk(KERN_WARNING "smic->state = %d\n", smic->state); + printk(KERN_DEBUG "smic->state = %d\n", smic->state); start_error_recovery(smic, "state = UNKNOWN"); return SI_SM_CALL_WITH_DELAY; } @@ -576,10 +568,12 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) static int smic_detect(struct si_sm_data *smic) { - /* It's impossible for the SMIC fnags register to be all 1's, - (assuming a properly functioning, self-initialized BMC) - but that's what you get from reading a bogus address, so we - test that first. */ + /* + * It's impossible for the SMIC fnags register to be all 1's, + * (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. + */ if (read_smic_flags(smic) == 0xff) return 1; @@ -595,8 +589,7 @@ static int smic_size(void) return sizeof(struct si_sm_data); } -struct si_sm_handlers smic_smi_handlers = -{ +struct si_sm_handlers smic_smi_handlers = { .init_data = init_smic_data, .start_transaction = start_smic_transaction, .get_result = smic_get_result, |