aboutsummaryrefslogtreecommitdiff
path: root/drivers/char
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/Kconfig9
-rw-r--r--drivers/char/agp/agp.h2
-rw-r--r--drivers/char/amiserial.c30
-rw-r--r--drivers/char/apm-emulation.c23
-rw-r--r--drivers/char/applicom.c4
-rw-r--r--drivers/char/consolemap.c1
-rw-r--r--drivers/char/cyclades.c432
-rw-r--r--drivers/char/drm/drmP.h8
-rw-r--r--drivers/char/drm/drm_sysfs.c2
-rw-r--r--drivers/char/drm/i830_dma.c18
-rw-r--r--drivers/char/drm/i830_drv.h2
-rw-r--r--drivers/char/drm/i830_irq.c8
-rw-r--r--drivers/char/drm/i915_dma.c4
-rw-r--r--drivers/char/drm/i915_drv.h2
-rw-r--r--drivers/char/drm/radeon_cp.c2
-rw-r--r--drivers/char/ds1286.c3
-rw-r--r--drivers/char/epca.c315
-rw-r--r--drivers/char/esp.c611
-rw-r--r--drivers/char/generic_serial.c18
-rw-r--r--drivers/char/hpet.c10
-rw-r--r--drivers/char/hvsi.c52
-rw-r--r--drivers/char/i8k.c12
-rw-r--r--drivers/char/ip2/i2ellis.c194
-rw-r--r--drivers/char/ip2/i2ellis.h58
-rw-r--r--drivers/char/ip2/i2hw.h6
-rw-r--r--drivers/char/ip2/i2lib.c141
-rw-r--r--drivers/char/ip2/i2os.h127
-rw-r--r--drivers/char/ip2/ip2main.c144
-rw-r--r--drivers/char/ipmi/Makefile4
-rw-r--r--drivers/char/ipmi/ipmi_bt_sm.c153
-rw-r--r--drivers/char/ipmi/ipmi_kcs_sm.c153
-rw-r--r--drivers/char/ipmi/ipmi_msghandler.c1508
-rw-r--r--drivers/char/ipmi/ipmi_poweroff.c206
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c698
-rw-r--r--drivers/char/ipmi/ipmi_si_sm.h89
-rw-r--r--drivers/char/ipmi/ipmi_smic_sm.c149
-rw-r--r--drivers/char/ipmi/ipmi_watchdog.c244
-rw-r--r--drivers/char/isicom.c171
-rw-r--r--drivers/char/istallion.c22
-rw-r--r--drivers/char/keyboard.c4
-rw-r--r--drivers/char/mem.c10
-rw-r--r--drivers/char/misc.c27
-rw-r--r--drivers/char/mmtimer.c424
-rw-r--r--drivers/char/moxa.c2999
-rw-r--r--drivers/char/moxa.h304
-rw-r--r--drivers/char/mspec.c12
-rw-r--r--drivers/char/mxser.c346
-rw-r--r--drivers/char/mxser.h137
-rw-r--r--drivers/char/n_hdlc.c35
-rw-r--r--drivers/char/n_r3964.c33
-rw-r--r--drivers/char/n_tty.c160
-rw-r--r--drivers/char/nozomi.c17
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c2
-rw-r--r--drivers/char/pcmcia/cm4040_cs.c2
-rw-r--r--drivers/char/pcmcia/ipwireless/hardware.c26
-rw-r--r--drivers/char/pcmcia/ipwireless/hardware.h2
-rw-r--r--drivers/char/pcmcia/ipwireless/network.c15
-rw-r--r--drivers/char/pcmcia/ipwireless/network.h3
-rw-r--r--drivers/char/pcmcia/synclink_cs.c23
-rw-r--r--drivers/char/pty.c32
-rw-r--r--drivers/char/random.c297
-rw-r--r--drivers/char/rio/cirrus.h210
-rw-r--r--drivers/char/rio/rio_linux.c10
-rw-r--r--drivers/char/rio/rio_linux.h6
-rw-r--r--drivers/char/rio/riocmd.c19
-rw-r--r--drivers/char/rio/rioctrl.c37
-rw-r--r--drivers/char/rio/riointr.c5
-rw-r--r--drivers/char/rio/rioparam.c70
-rw-r--r--drivers/char/rio/riotty.c25
-rw-r--r--drivers/char/riscom8.c706
-rw-r--r--drivers/char/rocket.c43
-rw-r--r--drivers/char/rocket_int.h2
-rw-r--r--drivers/char/rtc.c6
-rw-r--r--drivers/char/serial167.c25
-rw-r--r--drivers/char/snsc.c18
-rw-r--r--drivers/char/snsc_event.c16
-rw-r--r--drivers/char/sonypi.c2
-rw-r--r--drivers/char/specialix.c111
-rw-r--r--drivers/char/stallion.c17
-rw-r--r--drivers/char/sx.c35
-rw-r--r--drivers/char/synclink.c45
-rw-r--r--drivers/char/synclink_gt.c80
-rw-r--r--drivers/char/synclinkmp.c41
-rw-r--r--drivers/char/sysrq.c46
-rw-r--r--drivers/char/toshiba.c5
-rw-r--r--drivers/char/tpm/Kconfig5
-rw-r--r--drivers/char/tpm/tpm_nsc.c2
-rw-r--r--drivers/char/tty_audit.c64
-rw-r--r--drivers/char/tty_io.c378
-rw-r--r--drivers/char/tty_ioctl.c126
-rw-r--r--drivers/char/viocons.c12
-rw-r--r--drivers/char/viotape.c9
-rw-r--r--drivers/char/vt.c28
-rw-r--r--drivers/char/vt_ioctl.c452
94 files changed, 6671 insertions, 6530 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 929d4fa73fd..5dce3877eee 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -80,6 +80,15 @@ config VT_HW_CONSOLE_BINDING
information. For framebuffer console users, please refer to
<file:Documentation/fb/fbcon.txt>.
+config DEVKMEM
+ bool "/dev/kmem virtual device support"
+ default y
+ help
+ Say Y here if you want to support the /dev/kmem device. The
+ /dev/kmem device is rarely used, but can be used for certain
+ kind of kernel debugging operations.
+ When in doubt, say "N".
+
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
depends on HAS_IOMEM
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index c69f79598e4..99e6a406efb 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -35,7 +35,7 @@
//#define AGP_DEBUG 1
#ifdef AGP_DEBUG
-#define DBG(x,y...) printk (KERN_DEBUG PFX "%s: " x "\n", __FUNCTION__ , ## y)
+#define DBG(x,y...) printk (KERN_DEBUG PFX "%s: " x "\n", __func__ , ## y)
#else
#define DBG(x,y...) do { } while (0)
#endif
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 3d468f502d2..37457e5a4f2 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -832,33 +832,34 @@ static void change_speed(struct async_struct *info,
local_irq_restore(flags);
}
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
struct async_struct *info;
unsigned long flags;
if (!tty)
- return;
+ return 0;
info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
- return;
+ return 0;
if (!info->xmit.buf)
- return;
+ return 0;
local_irq_save(flags);
if (CIRC_SPACE(info->xmit.head,
info->xmit.tail,
SERIAL_XMIT_SIZE) == 0) {
local_irq_restore(flags);
- return;
+ return 0;
}
info->xmit.buf[info->xmit.head++] = ch;
info->xmit.head &= SERIAL_XMIT_SIZE-1;
local_irq_restore(flags);
+ return 1;
}
static void rs_flush_chars(struct tty_struct *tty)
@@ -1074,6 +1075,7 @@ static int get_serial_info(struct async_struct * info,
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
+ lock_kernel();
tmp.type = state->type;
tmp.line = state->line;
tmp.port = state->port;
@@ -1084,6 +1086,7 @@ static int get_serial_info(struct async_struct * info,
tmp.close_delay = state->close_delay;
tmp.closing_wait = state->closing_wait;
tmp.custom_divisor = state->custom_divisor;
+ unlock_kernel();
if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
return -EFAULT;
return 0;
@@ -1099,13 +1102,17 @@ static int set_serial_info(struct async_struct * info,
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
+
+ lock_kernel();
state = info->state;
old_state = *state;
change_irq = new_serial.irq != state->irq;
change_port = (new_serial.port != state->port);
- if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size))
+ if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) {
+ unlock_kernel();
return -EINVAL;
+ }
if (!serial_isroot()) {
if ((new_serial.baud_base != state->baud_base) ||
@@ -1122,8 +1129,10 @@ static int set_serial_info(struct async_struct * info,
goto check_and_exit;
}
- if (new_serial.baud_base < 9600)
+ if (new_serial.baud_base < 9600) {
+ unlock_kernel();
return -EINVAL;
+ }
/*
* OK, past this point, all the error checking has been done.
@@ -1157,6 +1166,7 @@ check_and_exit:
}
} else
retval = startup(info);
+ unlock_kernel();
return retval;
}
@@ -1496,8 +1506,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
rs_wait_until_sent(tty, info->timeout);
}
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ rs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
@@ -1530,6 +1539,8 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
return; /* Just in case.... */
orig_jiffies = jiffies;
+
+ lock_kernel();
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1570,6 +1581,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
__set_current_state(TASK_RUNNING);
+ unlock_kernel();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 17d54315e14..cdd876dbb2b 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -14,6 +14,7 @@
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/miscdevice.h>
#include <linux/apm_bios.h>
#include <linux/capability.h>
@@ -493,11 +494,10 @@ static struct miscdevice apm_device = {
* -1: Unknown
* 8) min = minutes; sec = seconds
*/
-static int apm_get_info(char *buf, char **start, off_t fpos, int length)
+static int proc_apm_show(struct seq_file *m, void *v)
{
struct apm_power_info info;
char *units;
- int ret;
info.ac_line_status = 0xff;
info.battery_status = 0xff;
@@ -515,14 +515,27 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length)
case 1: units = "sec"; break;
}
- ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+ seq_printf(m, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
driver_version, APM_32_BIT_SUPPORT,
info.ac_line_status, info.battery_status,
info.battery_flag, info.battery_life,
info.time, units);
- return ret;
+ return 0;
}
+
+static int proc_apm_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, proc_apm_show, NULL);
+}
+
+static const struct file_operations apm_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = proc_apm_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif
static int kapmd(void *arg)
@@ -593,7 +606,7 @@ static int __init apm_init(void)
wake_up_process(kapmd_tsk);
#ifdef CONFIG_PROC_FS
- create_proc_info_entry("apm", 0, NULL, apm_get_info);
+ proc_create("apm", 0, NULL, &apm_proc_fops);
#endif
ret = misc_register(&apm_device);
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index a7c4990b5b6..31d08b641f5 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -199,7 +199,7 @@ static int __init applicom_init(void)
if (pci_enable_device(dev))
return -EIO;
- RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO);
+ RamIO = ioremap_nocache(pci_resource_start(dev, 0), LEN_RAM_IO);
if (!RamIO) {
printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
@@ -254,7 +254,7 @@ static int __init applicom_init(void)
/* Now try the specified ISA cards */
for (i = 0; i < MAX_ISA_BOARD; i++) {
- RamIO = ioremap(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
+ RamIO = ioremap_nocache(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
if (!RamIO) {
printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1);
diff --git a/drivers/char/consolemap.c b/drivers/char/consolemap.c
index 6b104e45a32..4246b8e36cb 100644
--- a/drivers/char/consolemap.c
+++ b/drivers/char/consolemap.c
@@ -277,6 +277,7 @@ u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode)
return p->inverse_translations[m][glyph];
}
}
+EXPORT_SYMBOL_GPL(inverse_translate);
static void update_user_maps(void)
{
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index e4f579c3e24..ef73e72daed 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -21,7 +21,6 @@
*
* This version supports shared IRQ's (only for PCI boards).
*
- * $Log: cyclades.c,v $
* Prevent users from opening non-existing Z ports.
*
* Revision 2.3.2.8 2000/07/06 18:14:16 ivan
@@ -62,7 +61,7 @@
* Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined;
*
* Revision 2.3.2.2 1999/10/01 11:27:43 ivan
- * Fixed bug in cyz_poll that would make all ports but port 0
+ * Fixed bug in cyz_poll that would make all ports but port 0
* unable to transmit/receive data (Cyclades-Z only);
* Implemented logic to prevent the RX buffer from being stuck with data
* due to a driver / firmware race condition in interrupt op mode
@@ -83,25 +82,25 @@
* Revision 2.3.1.1 1999/07/15 16:45:53 ivan
* Removed CY_PROC conditional compilation;
* Implemented SMP-awareness for the driver;
- * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
+ * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
* functions;
* The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs
* (irq=NN) as parameters (only for ISA boards);
- * Fixed bug in set_line_char that would prevent the Cyclades-Z
+ * Fixed bug in set_line_char that would prevent the Cyclades-Z
* ports from being configured at speeds above 115.2Kbps;
* Fixed bug in cy_set_termios that would prevent XON/XOFF flow control
* switching from working properly;
- * The driver now only prints IRQ info for the Cyclades-Z if it's
+ * The driver now only prints IRQ info for the Cyclades-Z if it's
* configured to work in interrupt mode;
*
* Revision 2.2.2.3 1999/06/28 11:13:29 ivan
* Added support for interrupt mode operation for the Z cards;
* Removed the driver inactivity control for the Z;
- * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
+ * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
* the Z firmware is not loaded yet;
- * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
+ * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
* same functionality;
- * Implemented workaround for IRQ setting loss on the PCI configuration
+ * Implemented workaround for IRQ setting loss on the PCI configuration
* registers after a PCI bridge EEPROM reload (affects PLX9060 only);
*
* Revision 2.2.2.2 1999/05/14 17:18:15 ivan
@@ -112,22 +111,22 @@
* BREAK implementation changed in order to make use of the 'break_ctl'
* TTY facility;
* Fixed typo in TTY structure field 'driver_name';
- * Included a PCI bridge reset and EEPROM reload in the board
+ * Included a PCI bridge reset and EEPROM reload in the board
* initialization code (for both Y and Z series).
*
* Revision 2.2.2.1 1999/04/08 16:17:43 ivan
- * Fixed a bug in cy_wait_until_sent that was preventing the port to be
+ * Fixed a bug in cy_wait_until_sent that was preventing the port to be
* closed properly after a SIGINT;
* Module usage counter scheme revisited;
* Added support to the upcoming Y PCI boards (i.e., support to additional
* PCI Device ID's).
- *
+ *
* Revision 2.2.1.10 1999/01/20 16:14:29 ivan
* Removed all unnecessary page-alignement operations in ioremap calls
* (ioremap is currently safe for these operations).
*
* Revision 2.2.1.9 1998/12/30 18:18:30 ivan
- * Changed access to PLX PCI bridge registers from I/O to MMIO, in
+ * Changed access to PLX PCI bridge registers from I/O to MMIO, in
* order to make PLX9050-based boards work with certain motherboards.
*
* Revision 2.2.1.8 1998/11/13 12:46:20 ivan
@@ -148,7 +147,7 @@
* Fixed Cyclom-4Yo hardware detection bug.
*
* Revision 2.2.1.4 1998/08/04 11:02:50 ivan
- * /proc/cyclades implementation with great collaboration of
+ * /proc/cyclades implementation with great collaboration of
* Marc Lewis <marc@blarg.net>;
* cyy_interrupt was changed to avoid occurrence of kernel oopses
* during PPP operation.
@@ -157,7 +156,7 @@
* General code review in order to comply with 2.1 kernel standards;
* data loss prevention for slow devices revisited (cy_wait_until_sent
* was created);
- * removed conditional compilation for new/old PCI structure support
+ * removed conditional compilation for new/old PCI structure support
* (now the driver only supports the new PCI structure).
*
* Revision 2.2.1.1 1998/03/19 16:43:12 ivan
@@ -168,7 +167,7 @@
* cleaned up the data loss fix;
* fixed XON/XOFF handling once more (Cyclades-Z);
* general review of the driver routines;
- * introduction of a mechanism to prevent data loss with slow
+ * introduction of a mechanism to prevent data loss with slow
* printers, by forcing a delay before closing the port.
*
* Revision 2.1.1.2 1998/02/17 16:50:00 ivan
@@ -182,12 +181,12 @@
* Code review for the module cleanup routine;
* fixed RTS and DTR status report for new CD1400's in get_modem_info;
* includes anonymous changes regarding signal_pending.
- *
+ *
* Revision 2.1 1997/11/01 17:42:41 ivan
* Changes in the driver to support Alpha systems (except 8Zo V_1);
* BREAK fix for the Cyclades-Z boards;
* driver inactivity control by FW implemented;
- * introduction of flag that allows driver to take advantage of
+ * introduction of flag that allows driver to take advantage of
* a special CD1400 feature related to HW flow control;
* added support for the CD1400 rev. J (Cyclom-Y boards);
* introduction of ioctls to:
@@ -196,17 +195,17 @@
* - adjust the polling interval (Cyclades-Z);
*
* Revision 1.36.4.33 1997/06/27 19:00:00 ivan
- * Fixes related to kernel version conditional
+ * Fixes related to kernel version conditional
* compilation.
- *
+ *
* Revision 1.36.4.32 1997/06/14 19:30:00 ivan
- * Compatibility issues between kernels 2.0.x and
+ * Compatibility issues between kernels 2.0.x and
* 2.1.x (mainly related to clear_bit function).
- *
+ *
* Revision 1.36.4.31 1997/06/03 15:30:00 ivan
- * Changes to define the memory window according to the
+ * Changes to define the memory window according to the
* board type.
- *
+ *
* Revision 1.36.4.30 1997/05/16 15:30:00 daniel
* Changes to support new cycladesZ boards.
*
@@ -624,7 +623,7 @@
#undef CY_PCI_DEBUG
/*
- * Include section
+ * Include section
*/
#include <linux/module.h>
#include <linux/errno.h>
@@ -649,9 +648,9 @@
#include <linux/firmware.h>
#include <asm/system.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -668,10 +667,10 @@ static void cy_send_xchar(struct tty_struct *tty, char ch);
((readl(&((struct RUNTIME_9060 __iomem *) \
((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
-#define ISZLOADED(card) (((ZO_V1==readl(&((struct RUNTIME_9060 __iomem *) \
+#define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \
((card).ctl_addr))->mail_box_0)) || \
Z_FPGA_CHECK(card)) && \
- (ZFIRM_ID==readl(&((struct FIRM_ID __iomem *) \
+ (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \
((card).base_addr+ID_ADDRESS))->signature)))
#ifndef SERIAL_XMIT_SIZE
@@ -809,12 +808,12 @@ static char baud_cor3[] = { /* receive threshold */
/*
* The Cyclades driver implements HW flow control as any serial driver.
- * The cyclades_port structure member rflow and the vector rflow_thr
- * allows us to take advantage of a special feature in the CD1400 to avoid
- * data loss even when the system interrupt latency is too high. These flags
- * are to be used only with very special applications. Setting these flags
- * requires the use of a special cable (DTR and RTS reversed). In the new
- * CD1400-based boards (rev. 6.00 or later), there is no need for special
+ * The cyclades_port structure member rflow and the vector rflow_thr
+ * allows us to take advantage of a special feature in the CD1400 to avoid
+ * data loss even when the system interrupt latency is too high. These flags
+ * are to be used only with very special applications. Setting these flags
+ * requires the use of a special cable (DTR and RTS reversed). In the new
+ * CD1400-based boards (rev. 6.00 or later), there is no need for special
* cables.
*/
@@ -841,14 +840,22 @@ static int cy_chip_offset[] = { 0x0000,
#ifdef CONFIG_PCI
static struct pci_device_id cy_pci_dev_id[] __devinitdata = {
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, /* PCI < 1Mb */
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, /* PCI > 1Mb */
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, /* 4Y PCI < 1Mb */
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, /* 4Y PCI > 1Mb */
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, /* 8Y PCI < 1Mb */
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, /* 8Y PCI > 1Mb */
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, /* Z PCI < 1Mb */
- { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, /* Z PCI > 1Mb */
+ /* PCI < 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
+ /* PCI > 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) },
+ /* 4Y PCI < 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) },
+ /* 4Y PCI > 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) },
+ /* 8Y PCI < 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) },
+ /* 8Y PCI > 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) },
+ /* Z PCI < 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) },
+ /* Z PCI > 1Mb */
+ { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) },
{ } /* end of table */
};
MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
@@ -905,15 +912,14 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
This function is only called from inside spinlock-protected code.
*/
-static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index)
+static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
{
unsigned int i;
/* Check to see that the previous command has completed */
for (i = 0; i < 100; i++) {
- if (readb(base_addr + (CyCCR << index)) == 0) {
+ if (readb(base_addr + (CyCCR << index)) == 0)
break;
- }
udelay(10L);
}
/* if the CCR never cleared, the previous command
@@ -929,7 +935,7 @@ static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index)
#ifdef CONFIG_ISA
/* ISA interrupt detection code */
-static unsigned detect_isa_irq(void __iomem * address)
+static unsigned detect_isa_irq(void __iomem *address)
{
int irq;
unsigned long irqs, flags;
@@ -1038,7 +1044,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (data & CyFRAME) {
- tty_insert_flip_char( tty,
+ tty_insert_flip_char(tty,
readb(base_addr + (CyRDSR <<
index)), TTY_FRAME);
info->icount.rx++;
@@ -1320,7 +1326,8 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id)
if (unlikely(cinfo == NULL)) {
#ifdef CY_DEBUG_INTERRUPTS
- printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",irq);
+ printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",
+ irq);
#endif
return IRQ_NONE; /* spurious interrupt */
}
@@ -1375,12 +1382,12 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id)
/***********************************************************/
/********* End of block of Cyclom-Y specific code **********/
-/******** Start of block of Cyclades-Z specific code *********/
+/******** Start of block of Cyclades-Z specific code *******/
/***********************************************************/
static int
cyz_fetch_msg(struct cyclades_card *cinfo,
- __u32 * channel, __u8 * cmd, __u32 * param)
+ __u32 *channel, __u8 *cmd, __u32 *param)
{
struct FIRM_ID __iomem *firm_id;
struct ZFW_CTRL __iomem *zfw_ctrl;
@@ -1388,9 +1395,8 @@ cyz_fetch_msg(struct cyclades_card *cinfo,
unsigned long loc_doorbell;
firm_id = cinfo->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo)) {
+ if (!ISZLOADED(*cinfo))
return -1;
- }
zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
@@ -1418,9 +1424,9 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
unsigned int index;
firm_id = cinfo->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo)) {
+ if (!ISZLOADED(*cinfo))
return -1;
- }
+
zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
@@ -1428,9 +1434,8 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
pci_doorbell =
&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
while ((readl(pci_doorbell) & 0xff) != 0) {
- if (index++ == 1000) {
+ if (index++ == 1000)
return (int)(readl(pci_doorbell) & 0xff);
- }
udelay(50L);
}
cy_writel(&board_ctrl->hcmd_channel, channel);
@@ -1504,7 +1509,8 @@ static void cyz_handle_rx(struct cyclades_port *info,
while (len--) {
data = readb(cinfo->base_addr + rx_bufaddr +
new_rx_get);
- new_rx_get = (new_rx_get + 1)& (rx_bufsize - 1);
+ new_rx_get = (new_rx_get + 1) &
+ (rx_bufsize - 1);
tty_insert_flip_char(tty, data, TTY_NORMAL);
info->idle_stats.recv_bytes++;
info->icount.rx++;
@@ -1636,7 +1642,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
special_count = 0;
delta_count = 0;
info = &cinfo->ports[channel];
- if ((tty = info->tty) == NULL)
+ tty = info->tty;
+ if (tty == NULL)
continue;
ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
@@ -1732,7 +1739,8 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id)
if (unlikely(cinfo == NULL)) {
#ifdef CY_DEBUG_INTERRUPTS
- printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",irq);
+ printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",
+ irq);
#endif
return IRQ_NONE; /* spurious interrupt */
}
@@ -1851,9 +1859,8 @@ static int startup(struct cyclades_port *info)
}
if (!info->type) {
- if (info->tty) {
+ if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
free_page(page);
goto errout;
}
@@ -1904,9 +1911,8 @@ static int startup(struct cyclades_port *info)
readb(base_addr + (CySRER << index)) | CyRxData);
info->flags |= ASYNC_INITIALIZED;
- if (info->tty) {
+ if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
info->breakon = info->breakoff = 0;
memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -1925,9 +1931,8 @@ static int startup(struct cyclades_port *info)
base_addr = card->base_addr;
firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(*card)) {
+ if (!ISZLOADED(*card))
return -ENODEV;
- }
zfw_ctrl = card->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
@@ -1990,9 +1995,8 @@ static int startup(struct cyclades_port *info)
/* enable send, recv, modem !!! */
info->flags |= ASYNC_INITIALIZED;
- if (info->tty) {
+ if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
info->breakon = info->breakoff = 0;
memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -2061,9 +2065,8 @@ static void shutdown(struct cyclades_port *info)
void __iomem *base_addr;
int chip, channel, index;
- if (!(info->flags & ASYNC_INITIALIZED)) {
+ if (!(info->flags & ASYNC_INITIALIZED))
return;
- }
card = info->card;
channel = info->line - card->first_line;
@@ -2105,9 +2108,8 @@ static void shutdown(struct cyclades_port *info)
/* it may be appropriate to clear _XMIT at
some later date (after testing)!!! */
- if (info->tty) {
+ if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
info->flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
@@ -2124,9 +2126,8 @@ static void shutdown(struct cyclades_port *info)
#endif
firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(*card)) {
+ if (!ISZLOADED(*card))
return;
- }
zfw_ctrl = card->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
@@ -2157,9 +2158,8 @@ static void shutdown(struct cyclades_port *info)
#endif
}
- if (info->tty) {
+ if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
info->flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2204,7 +2204,8 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
* If non-blocking mode is set, then make the check up front
* and then exit.
*/
- if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -2301,7 +2302,8 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
return -EINVAL;
}
- zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)& 0xfffff);
+ zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)
+ & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
ch_ctrl = zfw_ctrl->ch_ctrl;
@@ -2378,9 +2380,9 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
int retval;
line = tty->index;
- if ((tty->index < 0) || (NR_PORTS <= line)) {
+ if (tty->index < 0 || NR_PORTS <= line)
return -ENODEV;
- }
+
for (i = 0; i < NR_CARDS; i++)
if (line < cy_card[i].first_line + cy_card[i].nports &&
line >= cy_card[i].first_line)
@@ -2388,9 +2390,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
if (i >= NR_CARDS)
return -ENODEV;
info = &cy_card[i].ports[line - cy_card[i].first_line];
- if (info->line < 0) {
+ if (info->line < 0)
return -ENODEV;
- }
/* If the card's firmware hasn't been loaded,
treat it as absent from the system. This
@@ -2456,9 +2457,9 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
#endif
tty->driver_data = info;
info->tty = tty;
- if (serial_paranoia_check(info, tty->name, "cy_open")) {
+ if (serial_paranoia_check(info, tty->name, "cy_open"))
return -ENODEV;
- }
+
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
info->count);
@@ -2482,9 +2483,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
* Start up serial port
*/
retval = startup(info);
- if (retval) {
+ if (retval)
return retval;
- }
retval = block_til_ready(tty, filp, info);
if (retval) {
@@ -2522,6 +2522,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
return; /* Just in case.... */
orig_jiffies = jiffies;
+ lock_kernel();
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -2573,11 +2574,47 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
}
/* Run one more char cycle */
msleep_interruptible(jiffies_to_msecs(char_time * 5));
+ unlock_kernel();
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
#endif
}
+static void cy_flush_buffer(struct tty_struct *tty)
+{
+ struct cyclades_port *info = tty->driver_data;
+ struct cyclades_card *card;
+ int channel, retval;
+ unsigned long flags;
+
+#ifdef CY_DEBUG_IO
+ printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line);
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
+ return;
+
+ card = info->card;
+ channel = info->line - card->first_line;
+
+ spin_lock_irqsave(&card->card_lock, flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
+
+ if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board
+ buffers as well */
+ spin_lock_irqsave(&card->card_lock, flags);
+ retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
+ if (retval != 0) {
+ printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d "
+ "was %x\n", info->line, retval);
+ }
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ }
+ tty_wakeup(tty);
+} /* cy_flush_buffer */
+
+
/*
* This routine is called when a particular tty device is closed.
*/
@@ -2591,9 +2628,8 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line);
#endif
- if (!info || serial_paranoia_check(info, tty->name, "cy_close")) {
+ if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
return;
- }
card = info->card;
@@ -2641,9 +2677,9 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
*/
tty->closing = 1;
spin_unlock_irqrestore(&card->card_lock, flags);
- if (info->closing_wait != CY_CLOSING_WAIT_NONE) {
+ if (info->closing_wait != CY_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->closing_wait);
- }
+
spin_lock_irqsave(&card->card_lock, flags);
if (!IS_CYC_Z(*card)) {
@@ -2657,15 +2693,16 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) & ~CyRxData);
if (info->flags & ASYNC_INITIALIZED) {
- /* Waiting for on-board buffers to be empty before closing
- the port */
+ /* Waiting for on-board buffers to be empty before
+ closing the port */
spin_unlock_irqrestore(&card->card_lock, flags);
cy_wait_until_sent(tty, info->timeout);
spin_lock_irqsave(&card->card_lock, flags);
}
} else {
#ifdef Z_WAKE
- /* Waiting for on-board buffers to be empty before closing the port */
+ /* Waiting for on-board buffers to be empty before closing
+ the port */
void __iomem *base_addr = card->base_addr;
struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
struct ZFW_CTRL __iomem *zfw_ctrl =
@@ -2689,8 +2726,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&card->card_lock, flags);
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ cy_flush_buffer(tty);
tty_ldisc_flush(tty);
spin_lock_irqsave(&card->card_lock, flags);
@@ -2738,17 +2774,16 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line);
#endif
- if (serial_paranoia_check(info, tty->name, "cy_write")) {
+ if (serial_paranoia_check(info, tty->name, "cy_write"))
return 0;
- }
if (!info->xmit_buf)
return 0;
spin_lock_irqsave(&info->card->card_lock, flags);
while (1) {
- c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1),
- (int)(SERIAL_XMIT_SIZE - info->xmit_head)));
+ c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1));
+ c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
@@ -2766,9 +2801,9 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
info->idle_stats.xmit_bytes += ret;
info->idle_stats.xmit_idle = jiffies;
- if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
+ if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped)
start_xmit(info);
- }
+
return ret;
} /* cy_write */
@@ -2779,7 +2814,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
* done stuffing characters into the driver. If there is no room
* in the queue, the character is ignored.
*/
-static void cy_put_char(struct tty_struct *tty, unsigned char ch)
+static int cy_put_char(struct tty_struct *tty, unsigned char ch)
{
struct cyclades_port *info = tty->driver_data;
unsigned long flags;
@@ -2789,15 +2824,15 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch)
#endif
if (serial_paranoia_check(info, tty->name, "cy_put_char"))
- return;
+ return 0;
if (!info->xmit_buf)
- return;
+ return 0;
spin_lock_irqsave(&info->card->card_lock, flags);
if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) {
spin_unlock_irqrestore(&info->card->card_lock, flags);
- return;
+ return 0;
}
info->xmit_buf[info->xmit_head++] = ch;
@@ -2806,11 +2841,12 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch)
info->idle_stats.xmit_bytes++;
info->idle_stats.xmit_idle = jiffies;
spin_unlock_irqrestore(&info->card->card_lock, flags);
+ return 1;
} /* cy_put_char */
/*
* This routine is called by the kernel after it has written a
- * series of characters to the tty device using put_char().
+ * series of characters to the tty device using put_char().
*/
static void cy_flush_chars(struct tty_struct *tty)
{
@@ -2882,6 +2918,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
int char_count;
__u32 tx_put, tx_get, tx_bufsize;
+ lock_kernel();
firm_id = card->base_addr + ID_ADDRESS;
zfw_ctrl = card->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
@@ -2899,6 +2936,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
info->line, info->xmit_cnt + char_count);
#endif
+ unlock_kernel();
return info->xmit_cnt + char_count;
}
#endif /* Z_EXT_CHARS_IN_BUFFER */
@@ -2950,12 +2988,12 @@ static void set_line_char(struct cyclades_port *info)
int baud, baud_rate = 0;
int i;
- if (!info->tty || !info->tty->termios) {
+ if (!info->tty || !info->tty->termios)
return;
- }
- if (info->line == -1) {
+
+ if (info->line == -1)
return;
- }
+
cflag = info->tty->termios->c_cflag;
iflag = info->tty->termios->c_iflag;
@@ -2994,13 +3032,11 @@ static void set_line_char(struct cyclades_port *info)
}
/* find the baud index */
for (i = 0; i < 20; i++) {
- if (baud == baud_table[i]) {
+ if (baud == baud_table[i])
break;
- }
}
- if (i == 20) {
+ if (i == 20)
i = 19; /* CD1400_MAX_SPEED */
- }
if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
@@ -3059,18 +3095,16 @@ static void set_line_char(struct cyclades_port *info)
info->cor1 = Cy_8_BITS;
break;
}
- if (cflag & CSTOPB) {
+ if (cflag & CSTOPB)
info->cor1 |= Cy_2_STOP;
- }
+
if (cflag & PARENB) {
- if (cflag & PARODD) {
+ if (cflag & PARODD)
info->cor1 |= CyPARITY_O;
- } else {
+ else
info->cor1 |= CyPARITY_E;
- }
- } else {
+ } else
info->cor1 |= CyPARITY_NONE;
- }
/* CTS flow control flag */
if (cflag & CRTSCTS) {
@@ -3123,7 +3157,8 @@ static void set_line_char(struct cyclades_port *info)
cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
CyCOR3ch, index);
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel); /* !!! Is this needed? */
+ /* !!! Is this needed? */
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
cy_writeb(base_addr + (CyRTPR << index),
(info->default_timeout ? info->default_timeout : 0x02));
/* 10ms rx timeout */
@@ -3191,9 +3226,8 @@ static void set_line_char(struct cyclades_port *info)
#endif
}
- if (info->tty) {
+ if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
@@ -3206,9 +3240,8 @@ static void set_line_char(struct cyclades_port *info)
int retval;
firm_id = card->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*card)) {
+ if (!ISZLOADED(*card))
return;
- }
zfw_ctrl = card->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
@@ -3268,14 +3301,12 @@ static void set_line_char(struct cyclades_port *info)
readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
}
if (cflag & PARENB) {
- if (cflag & PARODD) {
+ if (cflag & PARODD)
cy_writel(&ch_ctrl->comm_parity, C_PR_ODD);
- } else {
+ else
cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN);
- }
- } else {
+ } else
cy_writel(&ch_ctrl->comm_parity, C_PR_NONE);
- }
/* CTS flow control flag */
if (cflag & CRTSCTS) {
@@ -3305,11 +3336,10 @@ static void set_line_char(struct cyclades_port *info)
}
/* CD sensitivity */
- if (cflag & CLOCAL) {
+ if (cflag & CLOCAL)
info->flags &= ~ASYNC_CHECK_CD;
- } else {
+ else
info->flags |= ASYNC_CHECK_CD;
- }
if (baud == 0) { /* baud rate is zero, turn off line */
cy_writel(&ch_ctrl->rs_control,
@@ -3325,21 +3355,20 @@ static void set_line_char(struct cyclades_port *info)
#endif
}
- retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM,0L);
+ retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
if (retval != 0) {
printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d "
"was %x\n", info->line, retval);
}
- if (info->tty) {
+ if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
}
} /* set_line_char */
static int
get_serial_info(struct cyclades_port *info,
- struct serial_struct __user * retinfo)
+ struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
struct cyclades_card *cinfo = info->card;
@@ -3363,7 +3392,7 @@ get_serial_info(struct cyclades_port *info,
static int
set_serial_info(struct cyclades_port *info,
- struct serial_struct __user * new_info)
+ struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
struct cyclades_port old_info;
@@ -3417,7 +3446,7 @@ check_and_exit:
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
-static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value)
+static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
{
struct cyclades_card *card;
int chip, channel, index;
@@ -3461,9 +3490,11 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
struct BOARD_CTRL __iomem *board_ctrl;
struct CH_CTRL __iomem *ch_ctrl;
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
+ lock_kernel();
+
card = info->card;
channel = info->line - card->first_line;
if (!IS_CYC_Z(*card)) {
@@ -3506,10 +3537,12 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
} else {
result = 0;
+ unlock_kernel();
return -ENODEV;
}
}
+ unlock_kernel();
return result;
} /* cy_tiomget */
@@ -3528,7 +3561,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
struct CH_CTRL __iomem *ch_ctrl;
int retval;
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
card = info->card;
@@ -3727,8 +3760,8 @@ static void cy_break(struct tty_struct *tty, int break_state)
spin_unlock_irqrestore(&card->card_lock, flags);
} /* cy_break */
-static int
-get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon)
+static int get_mon_info(struct cyclades_port *info,
+ struct cyclades_monitor __user *mon)
{
if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
@@ -3767,8 +3800,8 @@ static int set_threshold(struct cyclades_port *info, unsigned long value)
return 0;
} /* set_threshold */
-static int
-get_threshold(struct cyclades_port *info, unsigned long __user * value)
+static int get_threshold(struct cyclades_port *info,
+ unsigned long __user *value)
{
struct cyclades_card *card;
void __iomem *base_addr;
@@ -3789,15 +3822,15 @@ get_threshold(struct cyclades_port *info, unsigned long __user * value)
return 0;
} /* get_threshold */
-static int
-set_default_threshold(struct cyclades_port *info, unsigned long value)
+static int set_default_threshold(struct cyclades_port *info,
+ unsigned long value)
{
info->default_threshold = value & 0x0f;
return 0;
} /* set_default_threshold */
-static int
-get_default_threshold(struct cyclades_port *info, unsigned long __user * value)
+static int get_default_threshold(struct cyclades_port *info,
+ unsigned long __user *value)
{
return put_user(info->default_threshold, value);
} /* get_default_threshold */
@@ -3824,7 +3857,8 @@ static int set_timeout(struct cyclades_port *info, unsigned long value)
return 0;
} /* set_timeout */
-static int get_timeout(struct cyclades_port *info, unsigned long __user * value)
+static int get_timeout(struct cyclades_port *info,
+ unsigned long __user *value)
{
struct cyclades_card *card;
void __iomem *base_addr;
@@ -3851,8 +3885,8 @@ static int set_default_timeout(struct cyclades_port *info, unsigned long value)
return 0;
} /* set_default_timeout */
-static int
-get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
+static int get_default_timeout(struct cyclades_port *info,
+ unsigned long __user *value)
{
return put_user(info->default_timeout, value);
} /* get_default_timeout */
@@ -3880,6 +3914,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
info->line, cmd, arg);
#endif
+ lock_kernel();
switch (cmd) {
case CYGETMON:
@@ -3936,7 +3971,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
break;
#endif /* CONFIG_CYZ_INTR */
case CYSETWAIT:
- info->closing_wait = (unsigned short)arg *HZ / 100;
+ info->closing_wait = (unsigned short)arg * HZ / 100;
ret_val = 0;
break;
case CYGETWAIT:
@@ -3988,47 +4023,47 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
p_cuser = argp;
ret_val = put_user(cnow.cts, &p_cuser->cts);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.dsr, &p_cuser->dsr);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.rng, &p_cuser->rng);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.dcd, &p_cuser->dcd);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.rx, &p_cuser->rx);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.tx, &p_cuser->tx);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.frame, &p_cuser->frame);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.overrun, &p_cuser->overrun);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.parity, &p_cuser->parity);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.brk, &p_cuser->brk);
if (ret_val)
- return ret_val;
+ break;
ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
if (ret_val)
- return ret_val;
+ break;
ret_val = 0;
break;
default:
ret_val = -ENOIOCTLCMD;
}
+ unlock_kernel();
#ifdef CY_DEBUG_OTHER
printk(KERN_DEBUG "cyc:cy_ioctl done\n");
#endif
-
return ret_val;
} /* cy_ioctl */
@@ -4113,9 +4148,8 @@ static void cy_throttle(struct tty_struct *tty)
tty->ldisc.chars_in_buffer(tty), info->line);
#endif
- if (serial_paranoia_check(info, tty->name, "cy_throttle")) {
+ if (serial_paranoia_check(info, tty->name, "cy_throttle"))
return;
- }
card = info->card;
@@ -4169,12 +4203,11 @@ static void cy_unthrottle(struct tty_struct *tty)
char buf[64];
printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
- tty_name(tty, buf), tty->ldisc.chars_in_buffer(tty),info->line);
+ tty_name(tty, buf), tty_chars_in_buffer(tty), info->line);
#endif
- if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) {
+ if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
return;
- }
if (I_IXOFF(tty)) {
if (info->x_char)
@@ -4269,47 +4302,14 @@ static void cy_start(struct tty_struct *tty)
base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
spin_lock_irqsave(&cinfo->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index), (u_char) (channel & 0x0003)); /* index channel */
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) (channel & 0x0003)); /* index channel */
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) | CyTxRdy);
spin_unlock_irqrestore(&cinfo->card_lock, flags);
}
} /* cy_start */
-static void cy_flush_buffer(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- struct cyclades_card *card;
- int channel, retval;
- unsigned long flags;
-
-#ifdef CY_DEBUG_IO
- printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
- return;
-
- card = info->card;
- channel = info->line - card->first_line;
-
- spin_lock_irqsave(&card->card_lock, flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- spin_unlock_irqrestore(&card->card_lock, flags);
-
- if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board
- buffers as well */
- spin_lock_irqsave(&card->card_lock, flags);
- retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
- if (retval != 0) {
- printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d "
- "was %x\n", info->line, retval);
- }
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- tty_wakeup(tty);
-} /* cy_flush_buffer */
-
/*
* cy_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
@@ -4406,10 +4406,11 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
info->cor3 = 0x08; /* _very_ small rcv threshold */
chip_number = (port - cinfo->first_line) / 4;
- if ((info->chip_rev = readb(cinfo->base_addr +
- (cy_chip_offset[chip_number] <<
- index) + (CyGFRCR << index))) >=
- CD1400_REV_J) {
+ info->chip_rev = readb(cinfo->base_addr +
+ (cy_chip_offset[chip_number] << index) +
+ (CyGFRCR << index));
+
+ if (info->chip_rev >= CD1400_REV_J) {
/* It is a CD1400 rev. J or later */
info->tbpr = baud_bpr_60[13]; /* Tx BPR */
info->tco = baud_co_60[13]; /* Tx CO */
@@ -4454,7 +4455,8 @@ static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
/* Cy_ClrIntr is 0x1800 */
udelay(500L);
- for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; chip_number++) {
+ for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD;
+ chip_number++) {
base_addr =
true_base_addr + (cy_chip_offset[chip_number] << index);
mdelay(1);
@@ -4555,12 +4557,11 @@ static int __init cy_detect_isa(void)
/* scan the address table probing for Cyclom-Y/ISA boards */
for (i = 0; i < NR_ISA_ADDRS; i++) {
unsigned int isa_address = cy_isa_addresses[i];
- if (isa_address == 0x0000) {
+ if (isa_address == 0x0000)
return nboard;
- }
/* probe for CD1400... */
- cy_isa_address = ioremap(isa_address, CyISA_Ywin);
+ cy_isa_address = ioremap_nocache(isa_address, CyISA_Ywin);
if (cy_isa_address == NULL) {
printk(KERN_ERR "Cyclom-Y/ISA: can't remap base "
"address\n");
@@ -4847,12 +4848,10 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
if (mailbox != 0) {
/* set window to last 512K of RAM */
cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE);
- //sleep(1);
for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
cy_writeb(tmp, 255);
/* set window to beginning of RAM */
cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
- //sleep(1);
}
retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL);
@@ -5382,7 +5381,8 @@ static void __exit cy_cleanup_module(void)
del_timer_sync(&cyz_timerlist);
#endif /* CONFIG_CYZ_INTR */
- if ((e1 = tty_unregister_driver(cy_serial_driver)))
+ e1 = tty_unregister_driver(cy_serial_driver);
+ if (e1)
printk(KERN_ERR "failed to unregister Cyclades serial "
"driver(%d)\n", e1);
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index ecee3547a13..213b3ca3468 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -160,7 +160,7 @@ struct drm_device;
* \param arg arguments
*/
#define DRM_ERROR(fmt, arg...) \
- printk(KERN_ERR "[" DRM_NAME ":%s] *ERROR* " fmt , __FUNCTION__ , ##arg)
+ printk(KERN_ERR "[" DRM_NAME ":%s] *ERROR* " fmt , __func__ , ##arg)
/**
* Memory error output.
@@ -170,7 +170,7 @@ struct drm_device;
* \param arg arguments
*/
#define DRM_MEM_ERROR(area, fmt, arg...) \
- printk(KERN_ERR "[" DRM_NAME ":%s:%s] *ERROR* " fmt , __FUNCTION__, \
+ printk(KERN_ERR "[" DRM_NAME ":%s:%s] *ERROR* " fmt , __func__, \
drm_mem_stats[area].name , ##arg)
#define DRM_INFO(fmt, arg...) printk(KERN_INFO "[" DRM_NAME "] " fmt , ##arg)
@@ -187,7 +187,7 @@ struct drm_device;
if ( drm_debug ) \
printk(KERN_DEBUG \
"[" DRM_NAME ":%s] " fmt , \
- __FUNCTION__ , ##arg); \
+ __func__ , ##arg); \
} while (0)
#else
#define DRM_DEBUG(fmt, arg...) do { } while (0)
@@ -238,7 +238,7 @@ do { \
if ( !_DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ) || \
dev->lock.file_priv != file_priv ) { \
DRM_ERROR( "%s called without lock held, held %d owner %p %p\n",\
- __FUNCTION__, _DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ),\
+ __func__, _DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ),\
dev->lock.file_priv, file_priv ); \
return -EINVAL; \
} \
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index 7a1d9a782dd..9a32169e88f 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -34,7 +34,7 @@ static int drm_sysfs_suspend(struct device *dev, pm_message_t state)
struct drm_minor *drm_minor = to_drm_minor(dev);
struct drm_device *drm_dev = drm_minor->dev;
- printk(KERN_ERR "%s\n", __FUNCTION__);
+ printk(KERN_ERR "%s\n", __func__);
if (drm_dev->driver->suspend)
return drm_dev->driver->suspend(drm_dev, state);
diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c
index 60c9376be48..a86ab30b462 100644
--- a/drivers/char/drm/i830_dma.c
+++ b/drivers/char/drm/i830_dma.c
@@ -692,7 +692,7 @@ static void i830EmitState(struct drm_device * dev)
drm_i830_sarea_t *sarea_priv = dev_priv->sarea_priv;
unsigned int dirty = sarea_priv->dirty;
- DRM_DEBUG("%s %x\n", __FUNCTION__, dirty);
+ DRM_DEBUG("%s %x\n", __func__, dirty);
if (dirty & I830_UPLOAD_BUFFERS) {
i830EmitDestVerified(dev, sarea_priv->BufferState);
@@ -1043,7 +1043,7 @@ static void i830_dma_dispatch_flip(struct drm_device * dev)
RING_LOCALS;
DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n",
- __FUNCTION__,
+ __func__,
dev_priv->current_page,
dev_priv->sarea_priv->pf_current_page);
@@ -1206,7 +1206,7 @@ static void i830_dma_quiescent(struct drm_device * dev)
OUT_RING(0);
ADVANCE_LP_RING();
- i830_wait_ring(dev, dev_priv->ring.Size - 8, __FUNCTION__);
+ i830_wait_ring(dev, dev_priv->ring.Size - 8, __func__);
}
static int i830_flush_queue(struct drm_device * dev)
@@ -1223,7 +1223,7 @@ static int i830_flush_queue(struct drm_device * dev)
OUT_RING(0);
ADVANCE_LP_RING();
- i830_wait_ring(dev, dev_priv->ring.Size - 8, __FUNCTION__);
+ i830_wait_ring(dev, dev_priv->ring.Size - 8, __func__);
for (i = 0; i < dma->buf_count; i++) {
struct drm_buf *buf = dma->buflist[i];
@@ -1344,7 +1344,7 @@ static void i830_do_init_pageflip(struct drm_device * dev)
{
drm_i830_private_t *dev_priv = dev->dev_private;
- DRM_DEBUG("%s\n", __FUNCTION__);
+ DRM_DEBUG("%s\n", __func__);
dev_priv->page_flipping = 1;
dev_priv->current_page = 0;
dev_priv->sarea_priv->pf_current_page = dev_priv->current_page;
@@ -1354,7 +1354,7 @@ static int i830_do_cleanup_pageflip(struct drm_device * dev)
{
drm_i830_private_t *dev_priv = dev->dev_private;
- DRM_DEBUG("%s\n", __FUNCTION__);
+ DRM_DEBUG("%s\n", __func__);
if (dev_priv->current_page != 0)
i830_dma_dispatch_flip(dev);
@@ -1367,7 +1367,7 @@ static int i830_flip_bufs(struct drm_device *dev, void *data,
{
drm_i830_private_t *dev_priv = dev->dev_private;
- DRM_DEBUG("%s\n", __FUNCTION__);
+ DRM_DEBUG("%s\n", __func__);
LOCK_TEST_WITH_RETURN(dev, file_priv);
@@ -1437,7 +1437,7 @@ static int i830_getparam(struct drm_device *dev, void *data,
int value;
if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+ DRM_ERROR("%s called with no initialization\n", __func__);
return -EINVAL;
}
@@ -1464,7 +1464,7 @@ static int i830_setparam(struct drm_device *dev, void *data,
drm_i830_setparam_t *param = data;
if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+ DRM_ERROR("%s called with no initialization\n", __func__);
return -EINVAL;
}
diff --git a/drivers/char/drm/i830_drv.h b/drivers/char/drm/i830_drv.h
index 4caba8c5445..b5bf8cc0fda 100644
--- a/drivers/char/drm/i830_drv.h
+++ b/drivers/char/drm/i830_drv.h
@@ -158,7 +158,7 @@ extern int i830_driver_device_is_agp(struct drm_device * dev);
if (I830_VERBOSE) \
printk("BEGIN_LP_RING(%d)\n", (n)); \
if (dev_priv->ring.space < n*4) \
- i830_wait_ring(dev, n*4, __FUNCTION__); \
+ i830_wait_ring(dev, n*4, __func__); \
outcount = 0; \
outring = dev_priv->ring.tail; \
ringmask = dev_priv->ring.tail_mask; \
diff --git a/drivers/char/drm/i830_irq.c b/drivers/char/drm/i830_irq.c
index a33db5f0967..91ec2bb497e 100644
--- a/drivers/char/drm/i830_irq.c
+++ b/drivers/char/drm/i830_irq.c
@@ -58,7 +58,7 @@ static int i830_emit_irq(struct drm_device * dev)
drm_i830_private_t *dev_priv = dev->dev_private;
RING_LOCALS;
- DRM_DEBUG("%s\n", __FUNCTION__);
+ DRM_DEBUG("%s\n", __func__);
atomic_inc(&dev_priv->irq_emitted);
@@ -77,7 +77,7 @@ static int i830_wait_irq(struct drm_device * dev, int irq_nr)
unsigned long end = jiffies + HZ * 3;
int ret = 0;
- DRM_DEBUG("%s\n", __FUNCTION__);
+ DRM_DEBUG("%s\n", __func__);
if (atomic_read(&dev_priv->irq_received) >= irq_nr)
return 0;
@@ -124,7 +124,7 @@ int i830_irq_emit(struct drm_device *dev, void *data,
LOCK_TEST_WITH_RETURN(dev, file_priv);
if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+ DRM_ERROR("%s called with no initialization\n", __func__);
return -EINVAL;
}
@@ -147,7 +147,7 @@ int i830_irq_wait(struct drm_device *dev, void *data,
drm_i830_irq_wait_t *irqwait = data;
if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+ DRM_ERROR("%s called with no initialization\n", __func__);
return -EINVAL;
}
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index ef7bf143a80..f47e46e3529 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -194,7 +194,7 @@ static int i915_dma_resume(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- DRM_DEBUG("%s\n", __FUNCTION__);
+ DRM_DEBUG("%s\n", __func__);
if (!dev_priv->sarea) {
DRM_ERROR("can not find sarea!\n");
@@ -609,7 +609,7 @@ static int i915_quiescent(struct drm_device * dev)
drm_i915_private_t *dev_priv = dev->dev_private;
i915_kernel_lost_context(dev);
- return i915_wait_ring(dev, dev_priv->ring.Size - 8, __FUNCTION__);
+ return i915_wait_ring(dev, dev_priv->ring.Size - 8, __func__);
}
static int i915_flush_ioctl(struct drm_device *dev, void *data,
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index c614d78b3df..db7001f2256 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -272,7 +272,7 @@ extern void i915_mem_release(struct drm_device * dev,
if (I915_VERBOSE) \
DRM_DEBUG("BEGIN_LP_RING(%d)\n", (n)); \
if (dev_priv->ring.space < (n)*4) \
- i915_wait_ring(dev, (n)*4, __FUNCTION__); \
+ i915_wait_ring(dev, (n)*4, __func__); \
outcount = 0; \
outring = dev_priv->ring.tail; \
ringmask = dev_priv->ring.tail_mask; \
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index 9072e4a1894..f6f6c92bf77 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -894,7 +894,7 @@ static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr)
#if RADEON_FIFO_DEBUG
static void radeon_status(drm_radeon_private_t * dev_priv)
{
- printk("%s:\n", __FUNCTION__);
+ printk("%s:\n", __func__);
printk("RBBM_STATUS = 0x%08x\n",
(unsigned int)RADEON_READ(RADEON_RBBM_STATUS));
printk("CP_RB_RTPR = 0x%08x\n",
diff --git a/drivers/char/ds1286.c b/drivers/char/ds1286.c
index 59146e3365b..ea35ab2c990 100644
--- a/drivers/char/ds1286.c
+++ b/drivers/char/ds1286.c
@@ -39,6 +39,7 @@
#include <linux/spinlock.h>
#include <linux/bcd.h>
#include <linux/proc_fs.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -451,7 +452,7 @@ static void ds1286_get_time(struct rtc_time *rtc_tm)
*/
if (ds1286_is_updating() != 0)
- while (jiffies - uip_watchdog < 2*HZ/100)
+ while (time_before(jiffies, uip_watchdog + 2*HZ/100))
barrier();
/*
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index ffd747c5dff..60a4df7dac1 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -38,8 +38,8 @@
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include "digiPCI.h"
@@ -73,7 +73,8 @@ static int invalid_lilo_config;
*/
static DEFINE_SPINLOCK(epca_lock);
-/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted to 7 below. */
+/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted
+ to 7 below. */
static struct board_info boards[MAXBOARDS];
static struct tty_driver *pc_driver;
@@ -157,13 +158,12 @@ static void epca_error(int, char *);
static void pc_close(struct tty_struct *, struct file *);
static void shutdown(struct channel *);
static void pc_hangup(struct tty_struct *);
-static void pc_put_char(struct tty_struct *, unsigned char);
static int pc_write_room(struct tty_struct *);
static int pc_chars_in_buffer(struct tty_struct *);
static void pc_flush_buffer(struct tty_struct *);
static void pc_flush_chars(struct tty_struct *);
static int block_til_ready(struct tty_struct *, struct file *,
- struct channel *);
+ struct channel *);
static int pc_open(struct tty_struct *, struct file *);
static void post_fep_init(unsigned int crd);
static void epcapoll(unsigned long);
@@ -175,18 +175,18 @@ static unsigned termios2digi_c(struct channel *ch, unsigned);
static void epcaparam(struct tty_struct *, struct channel *);
static void receive_data(struct channel *);
static int pc_ioctl(struct tty_struct *, struct file *,
- unsigned int, unsigned long);
+ unsigned int, unsigned long);
static int info_ioctl(struct tty_struct *, struct file *,
- unsigned int, unsigned long);
+ unsigned int, unsigned long);
static void pc_set_termios(struct tty_struct *, struct ktermios *);
static void do_softint(struct work_struct *work);
static void pc_stop(struct tty_struct *);
static void pc_start(struct tty_struct *);
-static void pc_throttle(struct tty_struct * tty);
+static void pc_throttle(struct tty_struct *tty);
static void pc_unthrottle(struct tty_struct *tty);
static void digi_send_break(struct channel *ch, int msec);
static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
-void epca_setup(char *, int *);
+static void epca_setup(char *, int *);
static int pc_write(struct tty_struct *, const unsigned char *, int);
static int pc_init(void);
@@ -243,7 +243,7 @@ static void assertmemoff(struct channel *ch)
/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */
static void pcxem_memwinon(struct board_info *b, unsigned int win)
{
- outb_p(FEPWIN|win, b->port + 1);
+ outb_p(FEPWIN | win, b->port + 1);
}
static void pcxem_memwinoff(struct board_info *b, unsigned int win)
@@ -253,7 +253,7 @@ static void pcxem_memwinoff(struct board_info *b, unsigned int win)
static void pcxem_globalwinon(struct channel *ch)
{
- outb_p( FEPWIN, (int)ch->board->port + 1);
+ outb_p(FEPWIN, (int)ch->board->port + 1);
}
static void pcxem_rxwinon(struct channel *ch)
@@ -394,7 +394,7 @@ static struct channel *verifyChannel(struct tty_struct *tty)
*/
if (tty) {
struct channel *ch = (struct channel *)tty->driver_data;
- if ((ch >= &digi_channels[0]) && (ch < &digi_channels[nbdevs])) {
+ if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) {
if (ch->magic == EPCA_MAGIC)
return ch;
}
@@ -414,7 +414,7 @@ static void pc_sched_event(struct channel *ch, int event)
static void epca_error(int line, char *msg)
{
- printk(KERN_ERR "epca_error (Digi): line = %d %s\n",line,msg);
+ printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg);
}
static void pc_close(struct tty_struct *tty, struct file *filp)
@@ -425,7 +425,8 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
if (tty_hung_up_p(filp)) {
spin_unlock_irqrestore(&epca_lock, flags);
@@ -440,7 +441,6 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&epca_lock, flags);
return;
}
-
/* Port open only once go ahead with shutdown & reset */
BUG_ON(ch->count < 0);
@@ -455,12 +455,13 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&epca_lock, flags);
if (ch->asyncflags & ASYNC_INITIALIZED) {
- /* Setup an event to indicate when the transmit buffer empties */
+ /* Setup an event to indicate when the
+ transmit buffer empties */
setup_empty_event(tty, ch);
- tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
+ /* 30 seconds timeout */
+ tty_wait_until_sent(tty, 3000);
}
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ pc_flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(ch);
@@ -477,7 +478,7 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
wake_up_interruptible(&ch->open_wait);
}
ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED |
- ASYNC_CLOSING);
+ ASYNC_CLOSING);
wake_up_interruptible(&ch->close_wait);
}
}
@@ -524,16 +525,15 @@ static void shutdown(struct channel *ch)
static void pc_hangup(struct tty_struct *tty)
{
struct channel *ch;
-
/*
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
unsigned long flags;
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ pc_flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(ch);
@@ -548,7 +548,7 @@ static void pc_hangup(struct tty_struct *tty)
}
static int pc_write(struct tty_struct *tty,
- const unsigned char *buf, int bytesAvailable)
+ const unsigned char *buf, int bytesAvailable)
{
unsigned int head, tail;
int dataLen;
@@ -572,7 +572,8 @@ static int pc_write(struct tty_struct *tty,
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) == NULL)
+ ch = verifyChannel(tty);
+ if (ch == NULL)
return 0;
/* Make a pointer to the channel data structure found on the board. */
@@ -645,26 +646,19 @@ static int pc_write(struct tty_struct *tty,
return amountCopied;
}
-static void pc_put_char(struct tty_struct *tty, unsigned char c)
-{
- pc_write(tty, &c, 1);
-}
-
static int pc_write_room(struct tty_struct *tty)
{
- int remain;
+ int remain = 0;
struct channel *ch;
unsigned long flags;
unsigned int head, tail;
struct board_chan __iomem *bc;
-
- remain = 0;
-
/*
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
globalwinon(ch);
@@ -676,8 +670,8 @@ static int pc_write_room(struct tty_struct *tty)
tail = readw(&bc->tout);
/* Wrap tail if necessary */
tail &= (ch->txbufsize - 1);
-
- if ((remain = tail - head - 1) < 0 )
+ remain = tail - head - 1;
+ if (remain < 0)
remain += ch->txbufsize;
if (remain && (ch->statusflags & LOWWAIT) == 0) {
@@ -699,12 +693,12 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
unsigned long flags;
struct channel *ch;
struct board_chan __iomem *bc;
-
/*
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) == NULL)
+ ch = verifyChannel(tty);
+ if (ch == NULL)
return 0;
spin_lock_irqsave(&epca_lock, flags);
@@ -715,7 +709,8 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
head = readw(&bc->tin);
ctail = readw(&ch->mailbox->cout);
- if (tail == head && readw(&ch->mailbox->cin) == ctail && readb(&bc->tbusy) == 0)
+ if (tail == head && readw(&ch->mailbox->cin) == ctail &&
+ readb(&bc->tbusy) == 0)
chars = 0;
else { /* Begin if some space on the card has been used */
head = readw(&bc->tin) & (ch->txbufsize - 1);
@@ -725,7 +720,8 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
* pc_write_room here we are finding the amount of bytes in the
* buffer filled. Not the amount of bytes empty.
*/
- if ((remain = tail - head - 1) < 0 )
+ remain = tail - head - 1;
+ if (remain < 0)
remain += ch->txbufsize;
chars = (int)(ch->txbufsize - remain);
/*
@@ -736,7 +732,7 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
* transmit buffer empties.
*/
if (!(ch->statusflags & EMPTYWAIT))
- setup_empty_event(tty,ch);
+ setup_empty_event(tty, ch);
} /* End if some space on the card has been used */
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
@@ -754,7 +750,8 @@ static void pc_flush_buffer(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) == NULL)
+ ch = verifyChannel(tty);
+ if (ch == NULL)
return;
spin_lock_irqsave(&epca_lock, flags);
@@ -775,23 +772,25 @@ static void pc_flush_chars(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
unsigned long flags;
spin_lock_irqsave(&epca_lock, flags);
/*
* If not already set and the transmitter is busy setup an
* event to indicate when the transmit empties.
*/
- if ((ch->statusflags & TXBUSY) && !(ch->statusflags & EMPTYWAIT))
- setup_empty_event(tty,ch);
+ if ((ch->statusflags & TXBUSY) &&
+ !(ch->statusflags & EMPTYWAIT))
+ setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
}
}
static int block_til_ready(struct tty_struct *tty,
- struct file *filp, struct channel *ch)
+ struct file *filp, struct channel *ch)
{
- DECLARE_WAITQUEUE(wait,current);
+ DECLARE_WAITQUEUE(wait, current);
int retval, do_clocal = 0;
unsigned long flags;
@@ -839,8 +838,7 @@ static int block_til_ready(struct tty_struct *tty,
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(ch->asyncflags & ASYNC_INITIALIZED))
- {
+ !(ch->asyncflags & ASYNC_INITIALIZED)) {
if (ch->asyncflags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
@@ -880,7 +878,7 @@ static int block_til_ready(struct tty_struct *tty,
return 0;
}
-static int pc_open(struct tty_struct *tty, struct file * filp)
+static int pc_open(struct tty_struct *tty, struct file *filp)
{
struct channel *ch;
unsigned long flags;
@@ -923,7 +921,8 @@ static int pc_open(struct tty_struct *tty, struct file * filp)
return(-ENODEV);
}
- if ((bc = ch->brdchan) == 0) {
+ bc = ch->brdchan;
+ if (bc == NULL) {
tty->driver_data = NULL;
return -ENODEV;
}
@@ -964,7 +963,7 @@ static int pc_open(struct tty_struct *tty, struct file * filp)
* The below routine generally sets up parity, baud, flow control
* issues, etc.... It effect both control flags and input flags.
*/
- epcaparam(tty,ch);
+ epcaparam(tty, ch);
ch->asyncflags |= ASYNC_INITIALIZED;
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
@@ -1002,8 +1001,8 @@ static void __exit epca_module_exit(void)
del_timer_sync(&epca_timer);
- if (tty_unregister_driver(pc_driver) || tty_unregister_driver(pc_info))
- {
+ if (tty_unregister_driver(pc_driver) ||
+ tty_unregister_driver(pc_info)) {
printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n");
return;
}
@@ -1034,7 +1033,6 @@ static const struct tty_operations pc_ops = {
.flush_buffer = pc_flush_buffer,
.chars_in_buffer = pc_chars_in_buffer,
.flush_chars = pc_flush_chars,
- .put_char = pc_put_char,
.ioctl = pc_ioctl,
.set_termios = pc_set_termios,
.stop = pc_stop,
@@ -1044,7 +1042,7 @@ static const struct tty_operations pc_ops = {
.hangup = pc_hangup,
};
-static int info_open(struct tty_struct *tty, struct file * filp)
+static int info_open(struct tty_struct *tty, struct file *filp)
{
return 0;
}
@@ -1099,7 +1097,7 @@ static int __init pc_init(void)
* Set up interrupt, we will worry about memory allocation in
* post_fep_init.
*/
- printk(KERN_INFO "DIGI epca driver version %s loaded.\n",VERSION);
+ printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION);
/*
* NOTE : This code assumes that the number of ports found in the
@@ -1252,7 +1250,7 @@ static int __init pc_init(void)
if ((board_id & 0x30) == 0x30)
bd->memory_seg = 0x8000;
} else
- printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n",(int)bd->port);
+ printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port);
break;
}
}
@@ -1326,12 +1324,12 @@ static void post_fep_init(unsigned int crd)
*/
/* PCI cards are already remapped at this point ISA are not */
bd->numports = readw(bd->re_map_membase + XEMPORTS);
- epcaassert(bd->numports <= 64,"PCI returned a invalid number of ports");
+ epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports");
nbdevs += (bd->numports);
} else {
/* Fix up the mappings for ISA/EISA etc */
/* FIXME: 64K - can we be smarter ? */
- bd->re_map_membase = ioremap(bd->membase, 0x10000);
+ bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000);
}
if (crd != 0)
@@ -1362,7 +1360,8 @@ static void post_fep_init(unsigned int crd)
* XEPORTS (address 0xc22) points at the number of channels the card
* supports. (For 64XE, XI, XEM, and XR use 0xc02)
*/
- if ((bd->type == PCXEVE || bd->type == PCXE) && (readw(memaddr + XEPORTS) < 3))
+ if ((bd->type == PCXEVE || bd->type == PCXE) &&
+ (readw(memaddr + XEPORTS) < 3))
shrinkmem = 1;
if (bd->type < PCIXEM)
if (!request_region((int)bd->port, 4, board_desc[bd->type]))
@@ -1461,10 +1460,12 @@ static void post_fep_init(unsigned int crd)
case PCXEVE:
case PCXE:
- ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) & 0x1fff);
+ ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4)
+ & 0x1fff);
ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9);
- ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) & 0x1fff);
- ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >>9 );
+ ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4)
+ & 0x1fff);
+ ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9);
break;
case PCXI:
@@ -1518,8 +1519,9 @@ static void post_fep_init(unsigned int crd)
}
printk(KERN_INFO
- "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
- VERSION, board_desc[bd->type], (long)bd->port, (long)bd->membase, bd->numports);
+ "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
+ VERSION, board_desc[bd->type], (long)bd->port,
+ (long)bd->membase, bd->numports);
memwinoff(bd, 0);
}
@@ -1527,7 +1529,7 @@ static void epcapoll(unsigned long ignored)
{
unsigned long flags;
int crd;
- volatile unsigned int head, tail;
+ unsigned int head, tail;
struct channel *ch;
struct board_info *bd;
@@ -1593,7 +1595,9 @@ static void doevent(int crd)
chan0 = card_ptr[crd];
epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range");
assertgwinon(chan0);
- while ((tail = readw(&chan0->mailbox->eout)) != (head = readw(&chan0->mailbox->ein))) { /* Begin while something in event queue */
+ while ((tail = readw(&chan0->mailbox->eout)) !=
+ (head = readw(&chan0->mailbox->ein))) {
+ /* Begin while something in event queue */
assertgwinon(chan0);
eventbuf = bd->re_map_membase + tail + ISTART;
/* Get the channel the event occurred on */
@@ -1617,7 +1621,8 @@ static void doevent(int crd)
goto next;
}
- if ((bc = ch->brdchan) == NULL)
+ bc = ch->brdchan;
+ if (bc == NULL)
goto next;
if (event & DATA_IND) { /* Begin DATA_IND */
@@ -1629,10 +1634,11 @@ static void doevent(int crd)
/* A modem signal change has been indicated */
ch->imodem = mstat;
if (ch->asyncflags & ASYNC_CHECK_CD) {
- if (mstat & ch->dcd) /* We are now receiving dcd */
+ /* We are now receiving dcd */
+ if (mstat & ch->dcd)
wake_up_interruptible(&ch->open_wait);
- else
- pc_sched_event(ch, EPCA_EVENT_HANGUP); /* No dcd; hangup */
+ else /* No dcd; hangup */
+ pc_sched_event(ch, EPCA_EVENT_HANGUP);
}
}
tty = ch->tty;
@@ -1647,7 +1653,8 @@ static void doevent(int crd)
tty_wakeup(tty);
}
} else if (event & EMPTYTX_IND) {
- /* This event is generated by setup_empty_event */
+ /* This event is generated by
+ setup_empty_event */
ch->statusflags &= ~TXBUSY;
if (ch->statusflags & EMPTYWAIT) {
ch->statusflags &= ~EMPTYWAIT;
@@ -1655,7 +1662,7 @@ static void doevent(int crd)
}
}
}
- next:
+next:
globalwinon(ch);
BUG_ON(!bc);
writew(1, &bc->idata);
@@ -1665,7 +1672,7 @@ static void doevent(int crd)
}
static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
- int byte2, int ncmds, int bytecmd)
+ int byte2, int ncmds, int bytecmd)
{
unchar __iomem *memaddr;
unsigned int head, cmdTail, cmdStart, cmdMax;
@@ -1690,8 +1697,10 @@ static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
memaddr = ch->board->re_map_membase;
if (head >= (cmdMax - cmdStart) || (head & 03)) {
- printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", __LINE__, cmd, head);
- printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", __LINE__, cmdMax, cmdStart);
+ printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n",
+ __LINE__, cmd, head);
+ printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n",
+ __LINE__, cmdMax, cmdStart);
return;
}
if (bytecmd) {
@@ -1770,7 +1779,7 @@ static unsigned termios2digi_h(struct channel *ch, unsigned cflag)
static unsigned termios2digi_i(struct channel *ch, unsigned iflag)
{
unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
- INPCK | ISTRIP|IXON|IXANY|IXOFF);
+ INPCK | ISTRIP | IXON | IXANY | IXOFF);
if (ch->digiext.digi_flags & DIGI_AIXON)
res |= IAIXON;
return res;
@@ -1838,7 +1847,7 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch)
unsigned mval, hflow, cflag, iflag;
bc = ch->brdchan;
- epcaassert(bc !=0, "bc out of range");
+ epcaassert(bc != NULL, "bc out of range");
assertgwinon(ch);
ts = tty->termios;
@@ -1884,8 +1893,10 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch)
* Command sets channels iflag structure on the board. Such
* things as input soft flow control, handling of parity
* errors, and break handling are all set here.
+ *
+ * break handling, parity handling, input stripping,
+ * flow control chars
*/
- /* break handling, parity handling, input stripping, flow control chars */
fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0);
}
/*
@@ -1981,7 +1992,7 @@ static void receive_data(struct channel *ch)
return;
/* If CREAD bit is off or device not open, set TX tail to head */
- if (!tty || !ts || !(ts->c_cflag & CREAD)) {
+ if (!tty || !ts || !(ts->c_cflag & CREAD)) {
writew(head, &bc->rout);
return;
}
@@ -1991,18 +2002,21 @@ static void receive_data(struct channel *ch)
if (readb(&bc->orun)) {
writeb(0, &bc->orun);
- printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",tty->name);
+ printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",
+ tty->name);
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
rxwinon(ch);
- while (bytesAvailable > 0) { /* Begin while there is data on the card */
+ while (bytesAvailable > 0) {
+ /* Begin while there is data on the card */
wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail;
/*
* Even if head has wrapped around only report the amount of
* data to be equal to the size - tail. Remember memcpy can't
* automaticly wrap around the receive buffer.
*/
- dataToRead = (wrapgap < bytesAvailable) ? wrapgap : bytesAvailable;
+ dataToRead = (wrapgap < bytesAvailable) ? wrapgap
+ : bytesAvailable;
/* Make sure we don't overflow the buffer */
dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead);
if (dataToRead == 0)
@@ -2153,14 +2167,14 @@ static int pc_tiocmset(struct tty_struct *tty, struct file *file,
* The below routine generally sets up parity, baud, flow control
* issues, etc.... It effect both control flags and input flags.
*/
- epcaparam(tty,ch);
+ epcaparam(tty, ch);
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
return 0;
}
-static int pc_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
+static int pc_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
digiflow_t dflow;
int retval;
@@ -2175,7 +2189,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
bc = ch->brdchan;
else
return -EINVAL;
-
/*
* For POSIX compliance we need to add more ioctls. See tty_ioctl.c in
* /usr/src/linux/drivers/char for a good example. In particular think
@@ -2186,9 +2199,10 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
retval = tty_check_change(tty);
if (retval)
return retval;
- /* Setup an event to indicate when the transmit buffer empties */
+ /* Setup an event to indicate when the transmit
+ buffer empties */
spin_lock_irqsave(&epca_lock, flags);
- setup_empty_event(tty,ch);
+ setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
tty_wait_until_sent(tty, 0);
if (!arg)
@@ -2198,29 +2212,14 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
retval = tty_check_change(tty);
if (retval)
return retval;
-
- /* Setup an event to indicate when the transmit buffer empties */
+ /* Setup an event to indicate when the transmit buffer
+ empties */
spin_lock_irqsave(&epca_lock, flags);
- setup_empty_event(tty,ch);
+ setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
tty_wait_until_sent(tty, 0);
digi_send_break(ch, arg ? arg*(HZ/10) : HZ/4);
return 0;
- case TIOCGSOFTCAR:
- if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)arg))
- return -EFAULT;
- return 0;
- case TIOCSSOFTCAR:
- {
- unsigned int value;
-
- if (get_user(value, (unsigned __user *)argp))
- return -EFAULT;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (value ? CLOCAL : 0));
- return 0;
- }
case TIOCMODG:
mflag = pc_tiocmget(tty, file);
if (put_user(mflag, (unsigned long __user *)argp))
@@ -2253,10 +2252,12 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
break;
case DIGI_SETAW:
case DIGI_SETAF:
+ lock_kernel();
if (cmd == DIGI_SETAW) {
- /* Setup an event to indicate when the transmit buffer empties */
+ /* Setup an event to indicate when the transmit
+ buffer empties */
spin_lock_irqsave(&epca_lock, flags);
- setup_empty_event(tty,ch);
+ setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
tty_wait_until_sent(tty, 0);
} else {
@@ -2264,6 +2265,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
}
+ unlock_kernel();
/* Fall Thru */
case DIGI_SETA:
if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))
@@ -2285,7 +2287,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
* control issues, etc.... It effect both control flags and
* input flags.
*/
- epcaparam(tty,ch);
+ epcaparam(tty, ch);
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
break;
@@ -2321,18 +2323,21 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
if (copy_from_user(&dflow, argp, sizeof(dflow)))
return -EFAULT;
- if (dflow.startc != startc || dflow.stopc != stopc) { /* Begin if setflow toggled */
+ if (dflow.startc != startc || dflow.stopc != stopc) {
+ /* Begin if setflow toggled */
spin_lock_irqsave(&epca_lock, flags);
globalwinon(ch);
if (cmd == DIGI_SETFLOW) {
ch->fepstartc = ch->startc = dflow.startc;
ch->fepstopc = ch->stopc = dflow.stopc;
- fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
+ fepcmd(ch, SONOFFC, ch->fepstartc,
+ ch->fepstopc, 0, 1);
} else {
ch->fepstartca = ch->startca = dflow.startc;
ch->fepstopca = ch->stopca = dflow.stopc;
- fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
+ fepcmd(ch, SAUXONOFFC, ch->fepstartca,
+ ch->fepstopca, 0, 1);
}
if (ch->statusflags & TXSTOPPED)
@@ -2356,7 +2361,9 @@ static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */
+ ch = verifyChannel(tty);
+
+ if (ch != NULL) { /* Begin if channel valid */
spin_lock_irqsave(&epca_lock, flags);
globalwinon(ch);
epcaparam(tty, ch);
@@ -2383,7 +2390,7 @@ static void do_softint(struct work_struct *work)
if (tty && tty->driver_data) {
if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
- tty_hangup(tty); /* FIXME: module removal race here - AKPM */
+ tty_hangup(tty);
wake_up_interruptible(&ch->open_wait);
ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
}
@@ -2403,9 +2410,11 @@ static void pc_stop(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
- if ((ch->statusflags & TXSTOPPED) == 0) { /* Begin if transmit stop requested */
+ if ((ch->statusflags & TXSTOPPED) == 0) {
+ /* Begin if transmit stop requested */
globalwinon(ch);
/* STOP transmitting now !! */
fepcmd(ch, PAUSETX, 0, 0, 0, 0);
@@ -2423,11 +2432,14 @@ static void pc_start(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
unsigned long flags;
spin_lock_irqsave(&epca_lock, flags);
- /* Just in case output was resumed because of a change in Digi-flow */
- if (ch->statusflags & TXSTOPPED) { /* Begin transmit resume requested */
+ /* Just in case output was resumed because of a change
+ in Digi-flow */
+ if (ch->statusflags & TXSTOPPED) {
+ /* Begin transmit resume requested */
struct board_chan __iomem *bc;
globalwinon(ch);
bc = ch->brdchan;
@@ -2457,7 +2469,8 @@ static void pc_throttle(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
if ((ch->statusflags & RXSTOPPED) == 0) {
globalwinon(ch);
@@ -2477,8 +2490,10 @@ static void pc_unthrottle(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
- if ((ch = verifyChannel(tty)) != NULL) {
- /* Just in case output was resumed because of a change in Digi-flow */
+ ch = verifyChannel(tty);
+ if (ch != NULL) {
+ /* Just in case output was resumed because of a change
+ in Digi-flow */
spin_lock_irqsave(&epca_lock, flags);
if (ch->statusflags & RXSTOPPED) {
globalwinon(ch);
@@ -2490,7 +2505,7 @@ static void pc_unthrottle(struct tty_struct *tty)
}
}
-void digi_send_break(struct channel *ch, int msec)
+static void digi_send_break(struct channel *ch, int msec)
{
unsigned long flags;
@@ -2523,7 +2538,7 @@ static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
memoff(ch);
}
-void epca_setup(char *str, int *ints)
+static void epca_setup(char *str, int *ints)
{
struct board_info board;
int index, loop, last;
@@ -2552,14 +2567,16 @@ void epca_setup(char *str, int *ints)
* instructing the driver to ignore epcaconfig.) For
* this reason we check for 2.
*/
- if (board.status == 2) { /* Begin ignore epcaconfig as well as lilo cmd line */
+ if (board.status == 2) {
+ /* Begin ignore epcaconfig as well as lilo cmd line */
nbdevs = 0;
num_cards = 0;
return;
} /* End ignore epcaconfig as well as lilo cmd line */
if (board.status > 2) {
- printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", board.status);
+ printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n",
+ board.status);
invalid_lilo_config = 1;
setup_error_code |= INVALID_BOARD_STATUS;
return;
@@ -2613,7 +2630,8 @@ void epca_setup(char *str, int *ints)
case 6:
board.membase = ints[index];
if (ints[index] <= 0) {
- printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",(unsigned int)board.membase);
+ printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",
+ (unsigned int)board.membase);
invalid_lilo_config = 1;
setup_error_code |= INVALID_MEM_BASE;
return;
@@ -2744,7 +2762,7 @@ void epca_setup(char *str, int *ints)
t2++;
if (*t2) {
- printk(KERN_ERR "epca_setup: Invalid memory base %s\n",str);
+ printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str);
invalid_lilo_config = 1;
setup_error_code |= INVALID_MEM_BASE;
return;
@@ -2766,7 +2784,7 @@ void epca_setup(char *str, int *ints)
/* I should REALLY validate the stuff here */
/* Copies our local copy of board into boards */
- memcpy((void *)&boards[num_cards],(void *)&board, sizeof(board));
+ memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board));
/* Does this get called once per lilo arg are what ? */
printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n",
num_cards, board_desc[board.type],
@@ -2807,9 +2825,9 @@ static int __devinit epca_init_one(struct pci_dev *pdev,
if (board_idx >= MAXBOARDS)
goto err_out;
- addr = pci_resource_start (pdev, epca_info_tbl[info_idx].bar_idx);
+ addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx);
if (!addr) {
- printk (KERN_ERR PFX "PCI region #%d not available (size 0)\n",
+ printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n",
epca_info_tbl[info_idx].bar_idx);
goto err_out;
}
@@ -2820,28 +2838,29 @@ static int __devinit epca_init_one(struct pci_dev *pdev,
boards[board_idx].port = addr + PCI_IO_OFFSET;
boards[board_idx].membase = addr;
- if (!request_mem_region (addr + PCI_IO_OFFSET, 0x200000, "epca")) {
- printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
+ if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) {
+ printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
0x200000, addr + PCI_IO_OFFSET);
goto err_out;
}
- boards[board_idx].re_map_port = ioremap(addr + PCI_IO_OFFSET, 0x200000);
+ boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET,
+ 0x200000);
if (!boards[board_idx].re_map_port) {
- printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
+ printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
0x200000, addr + PCI_IO_OFFSET);
goto err_out_free_pciio;
}
- if (!request_mem_region (addr, 0x200000, "epca")) {
- printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
+ if (!request_mem_region(addr, 0x200000, "epca")) {
+ printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
0x200000, addr);
goto err_out_free_iounmap;
}
- boards[board_idx].re_map_membase = ioremap(addr, 0x200000);
+ boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000);
if (!boards[board_idx].re_map_membase) {
- printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
+ printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
0x200000, addr + PCI_IO_OFFSET);
goto err_out_free_memregion;
}
@@ -2858,11 +2877,11 @@ static int __devinit epca_init_one(struct pci_dev *pdev,
return 0;
err_out_free_memregion:
- release_mem_region (addr, 0x200000);
+ release_mem_region(addr, 0x200000);
err_out_free_iounmap:
- iounmap (boards[board_idx].re_map_port);
+ iounmap(boards[board_idx].re_map_port);
err_out_free_pciio:
- release_mem_region (addr + PCI_IO_OFFSET, 0x200000);
+ release_mem_region(addr + PCI_IO_OFFSET, 0x200000);
err_out:
return -ENODEV;
}
@@ -2878,9 +2897,9 @@ static struct pci_device_id epca_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, epca_pci_tbl);
-int __init init_PCI (void)
+static int __init init_PCI(void)
{
- memset (&epca_driver, 0, sizeof (epca_driver));
+ memset(&epca_driver, 0, sizeof(epca_driver));
epca_driver.name = "epca";
epca_driver.id_table = epca_pci_tbl;
epca_driver.probe = epca_init_one;
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index f3fe6206734..84840ba13ff 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -8,7 +8,7 @@
* Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now
* much more extensible to support other serial cards based on the
* 16450/16550A UART's. Added support for the AST FourPort and the
- * Accent Async board.
+ * Accent Async board.
*
* set_serial_info fixed to set the flags, custom divisor, and uart
* type fields. Fix suggested by Michael K. Johnson 12/12/92.
@@ -61,11 +61,11 @@
#include <linux/bitops.h>
#include <asm/system.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/dma.h>
#include <linux/slab.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/hayesesp.h>
@@ -127,8 +127,10 @@ static struct tty_driver *esp_driver;
#undef SERIAL_DEBUG_FLOW
#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
-#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
- tty->name, (info->flags), serial_driver.refcount,info->count,tty->count,s)
+#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
+ tty->name, info->flags, \
+ serial_driver.refcount, \
+ info->count, tty->count, s)
#else
#define DBG_CNT(s)
#endif
@@ -189,7 +191,7 @@ static inline void serial_out(struct esp_struct *info, int offset,
*/
static void rs_stop(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_stop"))
@@ -206,12 +208,12 @@ static void rs_stop(struct tty_struct *tty)
static void rs_start(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_start"))
return;
-
+
spin_lock_irqsave(&info->lock, flags);
if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) {
info->IER |= UART_IER_THRI;
@@ -233,7 +235,7 @@ static void rs_start(struct tty_struct *tty)
* rs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
- *
+ *
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
*
* and look at the resulting assemble code in serial.s.
@@ -290,7 +292,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
}
status_mask = (info->read_status_mask >> 2) & 0x07;
-
+
for (i = 0; i < num_bytes - 1; i += 2) {
*((unsigned short *)(pio_buf->data + i)) =
inw(info->port + UART_ESI_RX);
@@ -325,8 +327,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
flag = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
- }
- else if (err_buf->data[i] & 0x02)
+ } else if (err_buf->data[i] & 0x02)
flag = TTY_FRAME;
else if (err_buf->data[i] & 0x01)
flag = TTY_PARITY;
@@ -341,23 +342,29 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
release_pio_buffer(err_buf);
}
-static inline void receive_chars_dma(struct esp_struct *info, int num_bytes)
+static void program_isa_dma(int dma, int dir, unsigned long addr, int len)
{
unsigned long flags;
+
+ flags = claim_dma_lock();
+ disable_dma(dma);
+ clear_dma_ff(dma);
+ set_dma_mode(dma, dir);
+ set_dma_addr(dma, addr);
+ set_dma_count(dma, len);
+ enable_dma(dma);
+ release_dma_lock(flags);
+}
+
+static void receive_chars_dma(struct esp_struct *info, int num_bytes)
+{
info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
dma_bytes = num_bytes;
info->stat_flags |= ESP_STAT_DMA_RX;
-
- flags=claim_dma_lock();
- disable_dma(dma);
- clear_dma_ff(dma);
- set_dma_mode(dma, DMA_MODE_READ);
- set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
- set_dma_count(dma, dma_bytes);
- enable_dma(dma);
- release_dma_lock(flags);
-
- serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX);
+
+ program_isa_dma(dma, DMA_MODE_READ, isa_virt_to_bus(dma_buffer),
+ dma_bytes);
+ serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX);
}
static inline void receive_chars_dma_done(struct esp_struct *info,
@@ -366,22 +373,22 @@ static inline void receive_chars_dma_done(struct esp_struct *info,
struct tty_struct *tty = info->tty;
int num_bytes;
unsigned long flags;
-
- flags=claim_dma_lock();
+
+ flags = claim_dma_lock();
disable_dma(dma);
clear_dma_ff(dma);
info->stat_flags &= ~ESP_STAT_DMA_RX;
num_bytes = dma_bytes - get_dma_residue(dma);
release_dma_lock(flags);
-
+
info->icount.rx += num_bytes;
if (num_bytes > 0) {
tty_insert_flip_string(tty, dma_buffer, num_bytes - 1);
status &= (0x1c & info->read_status_mask);
-
+
/* Is the status significant or do we throw the last byte ? */
if (!(status & info->ignore_status_mask)) {
int statflag = 0;
@@ -393,13 +400,13 @@ static inline void receive_chars_dma_done(struct esp_struct *info,
do_SAK(tty);
} else if (status & 0x08) {
statflag = TTY_FRAME;
- (info->icount.frame)++;
- }
- else if (status & 0x04) {
+ info->icount.frame++;
+ } else if (status & 0x04) {
statflag = TTY_PARITY;
- (info->icount.parity)++;
+ info->icount.parity++;
}
- tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], statflag);
+ tty_insert_flip_char(tty, dma_buffer[num_bytes - 1],
+ statflag);
}
tty_schedule_flip(tty);
}
@@ -484,8 +491,6 @@ static inline void transmit_chars_pio(struct esp_struct *info,
/* Caller must hold info->lock */
static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes)
{
- unsigned long flags;
-
dma_bytes = num_bytes;
if (info->xmit_tail + dma_bytes <= ESP_XMIT_SIZE) {
@@ -517,26 +522,18 @@ static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes)
}
info->stat_flags |= ESP_STAT_DMA_TX;
-
- flags=claim_dma_lock();
- disable_dma(dma);
- clear_dma_ff(dma);
- set_dma_mode(dma, DMA_MODE_WRITE);
- set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
- set_dma_count(dma, dma_bytes);
- enable_dma(dma);
- release_dma_lock(flags);
-
- serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
+
+ program_isa_dma(dma, DMA_MODE_WRITE, isa_virt_to_bus(dma_buffer),
+ dma_bytes);
+ serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
}
static inline void transmit_chars_dma_done(struct esp_struct *info)
{
int num_bytes;
unsigned long flags;
-
- flags=claim_dma_lock();
+ flags = claim_dma_lock();
disable_dma(dma);
clear_dma_ff(dma);
@@ -547,27 +544,21 @@ static inline void transmit_chars_dma_done(struct esp_struct *info)
if (dma_bytes != num_bytes) {
dma_bytes -= num_bytes;
memmove(dma_buffer, dma_buffer + num_bytes, dma_bytes);
-
- flags=claim_dma_lock();
- disable_dma(dma);
- clear_dma_ff(dma);
- set_dma_mode(dma, DMA_MODE_WRITE);
- set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
- set_dma_count(dma, dma_bytes);
- enable_dma(dma);
- release_dma_lock(flags);
-
- serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
+
+ program_isa_dma(dma, DMA_MODE_WRITE,
+ isa_virt_to_bus(dma_buffer), dma_bytes);
+
+ serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
} else {
dma_bytes = 0;
info->stat_flags &= ~ESP_STAT_DMA_TX;
}
}
-static inline void check_modem_status(struct esp_struct *info)
+static void check_modem_status(struct esp_struct *info)
{
int status;
-
+
serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
status = serial_in(info, UART_ESI_STAT2);
@@ -588,7 +579,7 @@ static inline void check_modem_status(struct esp_struct *info)
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
printk("ttys%d CD now %s...", info->line,
(status & UART_MSR_DCD) ? "on" : "off");
-#endif
+#endif
if (status & UART_MSR_DCD)
wake_up_interruptible(&info->open_wait);
else {
@@ -605,7 +596,7 @@ static inline void check_modem_status(struct esp_struct *info)
*/
static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
{
- struct esp_struct * info;
+ struct esp_struct *info;
unsigned err_status;
unsigned int scratch;
@@ -617,7 +608,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
scratch = serial_in(info, UART_ESI_SID);
spin_lock(&info->lock);
-
+
if (!info->tty) {
spin_unlock(&info->lock);
return IRQ_NONE;
@@ -637,7 +628,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
if (err_status & 0x80) /* Start break */
wake_up_interruptible(&info->break_wait);
}
-
+
if ((scratch & 0x88) || /* DMA completed or timed out */
(err_status & 0x1c) /* receive error */) {
if (info->stat_flags & ESP_STAT_DMA_RX)
@@ -667,7 +658,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
receive_chars_dma(info, num_bytes);
}
}
-
+
if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) &&
(scratch & 0x02) && (info->IER & UART_IER_THRI)) {
if ((info->xmit_cnt <= 0) || info->tty->stopped) {
@@ -722,11 +713,11 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
* ---------------------------------------------------------------
*/
-static inline void esp_basic_init(struct esp_struct * info)
+static void esp_basic_init(struct esp_struct *info)
{
/* put ESPC in enhanced mode */
serial_out(info, UART_ESI_CMD1, ESI_SET_MODE);
-
+
if (info->stat_flags & ESP_STAT_NEVER_DMA)
serial_out(info, UART_ESI_CMD2, 0x01);
else
@@ -783,13 +774,13 @@ static inline void esp_basic_init(struct esp_struct * info)
serial_out(info, UART_ESI_CMD2, 0xff);
}
-static int startup(struct esp_struct * info)
+static int startup(struct esp_struct *info)
{
unsigned long flags;
- int retval=0;
- unsigned int num_chars;
+ int retval = 0;
+ unsigned int num_chars;
- spin_lock_irqsave(&info->lock, flags);
+ spin_lock_irqsave(&info->lock, flags);
if (info->flags & ASYNC_INITIALIZED)
goto out;
@@ -802,7 +793,8 @@ static int startup(struct esp_struct * info)
}
#ifdef SERIAL_DEBUG_OPEN
- printk("starting up ttys%d (irq %d)...", info->line, info->irq);
+ printk(KERN_DEBUG "starting up ttys%d (irq %d)...",
+ info->line, info->irq);
#endif
/* Flush the RX buffer. Using the ESI flush command may cause */
@@ -863,7 +855,7 @@ static int startup(struct esp_struct * info)
dma_buffer = NULL;
info->stat_flags |= ESP_STAT_USE_PIO;
}
-
+
}
info->MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
@@ -872,7 +864,7 @@ static int startup(struct esp_struct * info)
serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
serial_out(info, UART_ESI_CMD2, UART_MCR);
serial_out(info, UART_ESI_CMD2, info->MCR);
-
+
/*
* Finally, enable interrupts
*/
@@ -881,7 +873,7 @@ static int startup(struct esp_struct * info)
UART_IER_DMA_TC;
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
serial_out(info, UART_ESI_CMD2, info->IER);
-
+
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
@@ -900,7 +892,7 @@ static int startup(struct esp_struct * info)
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
info->tty->alt_speed = 460800;
}
-
+
/*
* set the speed of the serial port
*/
@@ -918,7 +910,7 @@ out_unlocked:
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
-static void shutdown(struct esp_struct * info)
+static void shutdown(struct esp_struct *info)
{
unsigned long flags, f;
@@ -929,7 +921,7 @@ static void shutdown(struct esp_struct * info)
printk("Shutting down serial port %d (irq %d)....", info->line,
info->irq);
#endif
-
+
spin_lock_irqsave(&info->lock, flags);
/*
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
@@ -941,14 +933,14 @@ static void shutdown(struct esp_struct * info)
/* stop a DMA transfer on the port being closed */
/* DMA lock is higher priority always */
if (info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) {
- f=claim_dma_lock();
+ f = claim_dma_lock();
disable_dma(dma);
clear_dma_ff(dma);
release_dma_lock(f);
-
+
dma_bytes = 0;
}
-
+
/*
* Free the IRQ
*/
@@ -970,7 +962,7 @@ static void shutdown(struct esp_struct * info)
free_pages((unsigned long)dma_buffer,
get_order(DMA_BUFFER_SZ));
dma_buffer = NULL;
- }
+ }
}
if (info->xmit_buf) {
@@ -992,7 +984,7 @@ static void shutdown(struct esp_struct * info)
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
-
+
info->flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->lock, flags);
}
@@ -1005,7 +997,7 @@ static void change_speed(struct esp_struct *info)
{
unsigned short port;
int quot = 0;
- unsigned cflag,cval;
+ unsigned cflag, cval;
int baud, bits;
unsigned char flow1 = 0, flow2 = 0;
unsigned long flags;
@@ -1014,14 +1006,14 @@ static void change_speed(struct esp_struct *info)
return;
cflag = info->tty->termios->c_cflag;
port = info->port;
-
+
/* byte size and parity */
switch (cflag & CSIZE) {
- case CS5: cval = 0x00; bits = 7; break;
- case CS6: cval = 0x01; bits = 8; break;
- case CS7: cval = 0x02; bits = 9; break;
- case CS8: cval = 0x03; bits = 10; break;
- default: cval = 0x00; bits = 7; break;
+ case CS5: cval = 0x00; bits = 7; break;
+ case CS6: cval = 0x01; bits = 8; break;
+ case CS7: cval = 0x02; bits = 9; break;
+ case CS8: cval = 0x03; bits = 10; break;
+ default: cval = 0x00; bits = 7; break;
}
if (cflag & CSTOPB) {
cval |= 0x04;
@@ -1037,14 +1029,12 @@ static void change_speed(struct esp_struct *info)
if (cflag & CMSPAR)
cval |= UART_LCR_SPAR;
#endif
-
baud = tty_get_baud_rate(info->tty);
if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
quot = info->custom_divisor;
else {
- if (baud == 134)
- /* Special case since 134 is really 134.5 */
+ if (baud == 134) /* Special case since 134 is really 134.5 */
quot = (2*BASE_BAUD / 269);
else if (baud)
quot = BASE_BAUD / baud;
@@ -1052,7 +1042,12 @@ static void change_speed(struct esp_struct *info)
/* If the quotient is ever zero, default to 9600 bps */
if (!quot)
quot = BASE_BAUD / 9600;
-
+
+ if (baud) {
+ /* Actual rate */
+ baud = BASE_BAUD/quot;
+ tty_encode_baud_rate(info->tty, baud, baud);
+ }
info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50);
/* CTS flow control flag and modem status interrupts */
@@ -1066,10 +1061,8 @@ static void change_speed(struct esp_struct *info)
info->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
info->flags &= ~ASYNC_CHECK_CD;
- else {
+ else
info->flags |= ASYNC_CHECK_CD;
- /* info->IER |= UART_IER_MSI; */
- }
/*
* Set up parity check flag
@@ -1079,7 +1072,7 @@ static void change_speed(struct esp_struct *info)
info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
info->read_status_mask |= UART_LSR_BI;
-
+
info->ignore_status_mask = 0;
#if 0
/* This should be safe, but for some broken bits of hardware... */
@@ -1092,7 +1085,7 @@ static void change_speed(struct esp_struct *info)
info->ignore_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_BI;
/*
- * If we're ignore parity and break indicators, ignore
+ * If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(info->tty)) {
@@ -1130,19 +1123,19 @@ static void change_speed(struct esp_struct *info)
serial_out(info, UART_ESI_CMD2, 0x10);
serial_out(info, UART_ESI_CMD2, 0x21);
switch (cflag & CSIZE) {
- case CS5:
- serial_out(info, UART_ESI_CMD2, 0x1f);
- break;
- case CS6:
- serial_out(info, UART_ESI_CMD2, 0x3f);
- break;
- case CS7:
- case CS8:
- serial_out(info, UART_ESI_CMD2, 0x7f);
- break;
- default:
- serial_out(info, UART_ESI_CMD2, 0xff);
- break;
+ case CS5:
+ serial_out(info, UART_ESI_CMD2, 0x1f);
+ break;
+ case CS6:
+ serial_out(info, UART_ESI_CMD2, 0x3f);
+ break;
+ case CS7:
+ case CS8:
+ serial_out(info, UART_ESI_CMD2, 0x7f);
+ break;
+ default:
+ serial_out(info, UART_ESI_CMD2, 0xff);
+ break;
}
}
@@ -1156,31 +1149,34 @@ static void change_speed(struct esp_struct *info)
spin_unlock_irqrestore(&info->lock, flags);
}
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
+ int ret = 0;
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
- return;
+ return 0;
if (!info->xmit_buf)
- return;
+ return 0;
spin_lock_irqsave(&info->lock, flags);
if (info->xmit_cnt < ESP_XMIT_SIZE - 1) {
info->xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= ESP_XMIT_SIZE-1;
info->xmit_cnt++;
+ ret = 1;
}
spin_unlock_irqrestore(&info->lock, flags);
+ return ret;
}
static void rs_flush_chars(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
return;
@@ -1198,11 +1194,11 @@ out:
spin_unlock_irqrestore(&info->lock, flags);
}
-static int rs_write(struct tty_struct * tty,
+static int rs_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
int c, t, ret = 0;
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_write"))
@@ -1210,19 +1206,19 @@ static int rs_write(struct tty_struct * tty,
if (!info->xmit_buf)
return 0;
-
+
while (1) {
/* Thanks to R. Wolff for suggesting how to do this with */
/* interrupts enabled */
c = count;
t = ESP_XMIT_SIZE - info->xmit_cnt - 1;
-
+
if (t < c)
c = t;
t = ESP_XMIT_SIZE - info->xmit_head;
-
+
if (t < c)
c = t;
@@ -1252,10 +1248,10 @@ static int rs_write(struct tty_struct * tty,
static int rs_write_room(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
int ret;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_write_room"))
return 0;
@@ -1270,8 +1266,8 @@ static int rs_write_room(struct tty_struct *tty)
static int rs_chars_in_buffer(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
-
+ struct esp_struct *info = tty->driver_data;
+
if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
return 0;
return info->xmit_cnt;
@@ -1279,9 +1275,9 @@ static int rs_chars_in_buffer(struct tty_struct *tty)
static void rs_flush_buffer(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
spin_lock_irqsave(&info->lock, flags);
@@ -1293,20 +1289,20 @@ static void rs_flush_buffer(struct tty_struct *tty)
/*
* ------------------------------------------------------------
* rs_throttle()
- *
+ *
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
-static void rs_throttle(struct tty_struct * tty)
+static void rs_throttle(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
-
+
printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
+ tty_chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_throttle"))
@@ -1321,20 +1317,20 @@ static void rs_throttle(struct tty_struct * tty)
spin_unlock_irqrestore(&info->lock, flags);
}
-static void rs_unthrottle(struct tty_struct * tty)
+static void rs_unthrottle(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
-
- printk("unthrottle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
+
+ printk(KERN_DEBUG "unthrottle %s: %d....\n", tty_name(tty, buf),
+ tty_chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
return;
-
+
spin_lock_irqsave(&info->lock, flags);
info->IER |= UART_IER_RDI;
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
@@ -1350,11 +1346,12 @@ static void rs_unthrottle(struct tty_struct * tty)
* ------------------------------------------------------------
*/
-static int get_serial_info(struct esp_struct * info,
+static int get_serial_info(struct esp_struct *info,
struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
-
+
+ lock_kernel();
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
tmp.line = info->line;
@@ -1367,20 +1364,22 @@ static int get_serial_info(struct esp_struct * info,
tmp.closing_wait = info->closing_wait;
tmp.custom_divisor = info->custom_divisor;
tmp.hub6 = 0;
- if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
+ unlock_kernel();
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
}
-static int get_esp_config(struct esp_struct * info,
+static int get_esp_config(struct esp_struct *info,
struct hayes_esp_config __user *retinfo)
{
struct hayes_esp_config tmp;
-
+
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
+ lock_kernel();
tmp.rx_timeout = info->config.rx_timeout;
tmp.rx_trigger = info->config.rx_trigger;
tmp.tx_trigger = info->config.tx_trigger;
@@ -1388,11 +1387,12 @@ static int get_esp_config(struct esp_struct * info,
tmp.flow_on = info->config.flow_on;
tmp.pio_threshold = info->config.pio_threshold;
tmp.dma_channel = (info->stat_flags & ESP_STAT_NEVER_DMA ? 0 : dma);
+ unlock_kernel();
return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
}
-static int set_serial_info(struct esp_struct * info,
+static int set_serial_info(struct esp_struct *info,
struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
@@ -1401,7 +1401,7 @@ static int set_serial_info(struct esp_struct * info,
int retval = 0;
struct esp_struct *current_async;
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
old_info = *info;
@@ -1422,7 +1422,7 @@ static int set_serial_info(struct esp_struct * info,
return -EINVAL;
if (!capable(CAP_SYS_ADMIN)) {
- if (change_irq ||
+ if (change_irq ||
(new_serial.close_delay != info->close_delay) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
(info->flags & ~ASYNC_USR_MASK)))
@@ -1507,8 +1507,8 @@ static int set_serial_info(struct esp_struct * info,
return retval;
}
-static int set_esp_config(struct esp_struct * info,
- struct hayes_esp_config __user * new_info)
+static int set_esp_config(struct esp_struct *info,
+ struct hayes_esp_config __user *new_info)
{
struct hayes_esp_config new_config;
unsigned int change_dma;
@@ -1550,7 +1550,6 @@ static int set_esp_config(struct esp_struct * info,
if (new_config.dma_channel) {
/* PIO mode to DMA mode transition OR */
/* change current DMA channel */
-
current_async = ports;
while (current_async) {
@@ -1559,16 +1558,15 @@ static int set_esp_config(struct esp_struct * info,
return -EBUSY;
} else if (current_async->count)
return -EBUSY;
-
- current_async =
- current_async->next_port;
+
+ current_async = current_async->next_port;
}
shutdown(info);
dma = new_config.dma_channel;
info->stat_flags &= ~ESP_STAT_NEVER_DMA;
-
- /* all ports must use the same DMA channel */
+
+ /* all ports must use the same DMA channel */
spin_lock_irqsave(&info->lock, flags);
current_async = ports;
@@ -1580,7 +1578,6 @@ static int set_esp_config(struct esp_struct * info,
spin_unlock_irqrestore(&info->lock, flags);
} else {
/* DMA mode to PIO mode only */
-
if (info->count > 1)
return -EBUSY;
@@ -1596,8 +1593,6 @@ static int set_esp_config(struct esp_struct * info,
if ((new_config.flow_off != info->config.flow_off) ||
(new_config.flow_on != info->config.flow_on)) {
- unsigned long flags;
-
info->config.flow_off = new_config.flow_off;
info->config.flow_on = new_config.flow_on;
@@ -1612,8 +1607,6 @@ static int set_esp_config(struct esp_struct * info,
if ((new_config.rx_trigger != info->config.rx_trigger) ||
(new_config.tx_trigger != info->config.tx_trigger)) {
- unsigned long flags;
-
info->config.rx_trigger = new_config.rx_trigger;
info->config.tx_trigger = new_config.tx_trigger;
spin_lock_irqsave(&info->lock, flags);
@@ -1628,8 +1621,6 @@ static int set_esp_config(struct esp_struct * info,
}
if (new_config.rx_timeout != info->config.rx_timeout) {
- unsigned long flags;
-
info->config.rx_timeout = new_config.rx_timeout;
spin_lock_irqsave(&info->lock, flags);
@@ -1657,9 +1648,9 @@ static int set_esp_config(struct esp_struct * info,
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
+ * allows an RS485 driver to be written in user space.
*/
-static int get_lsr_info(struct esp_struct * info, unsigned int __user *value)
+static int get_lsr_info(struct esp_struct *info, unsigned int __user *value)
{
unsigned char status;
unsigned int result;
@@ -1670,17 +1661,17 @@ static int get_lsr_info(struct esp_struct * info, unsigned int __user *value)
status = serial_in(info, UART_ESI_STAT1);
spin_unlock_irqrestore(&info->lock, flags);
result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
- return put_user(result,value);
+ return put_user(result, value);
}
static int esp_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned char control, status;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
@@ -1703,10 +1694,10 @@ static int esp_tiocmget(struct tty_struct *tty, struct file *file)
static int esp_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
@@ -1736,9 +1727,9 @@ static int esp_tiocmset(struct tty_struct *tty, struct file *file,
*/
static void esp_break(struct tty_struct *tty, int break_state)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "esp_break"))
return;
@@ -1758,14 +1749,15 @@ static void esp_break(struct tty_struct *tty, int break_state)
}
}
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser; /* user space */
void __user *argp = (void __user *)arg;
unsigned long flags;
+ int ret;
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
return -ENODEV;
@@ -1778,97 +1770,93 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
-
- switch (cmd) {
- case TIOCGSERIAL:
- return get_serial_info(info, argp);
- case TIOCSSERIAL:
- return set_serial_info(info, argp);
- case TIOCSERCONFIG:
- /* do not reconfigure after initial configuration */
- return 0;
-
- case TIOCSERGWILD:
- return put_user(0L, (unsigned long __user *)argp);
- case TIOCSERGETLSR: /* Get line status register */
- return get_lsr_info(info, argp);
-
- case TIOCSERSWILD:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- return 0;
-
- /*
- * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
- * - mask passed in arg for lines of interest
- * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
- * Caller should use TIOCGICOUNT to see which one it was
- */
- case TIOCMIWAIT:
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return get_serial_info(info, argp);
+ case TIOCSSERIAL:
+ lock_kernel();
+ ret = set_serial_info(info, argp);
+ unlock_kernel();
+ return ret;
+ case TIOCSERGWILD:
+ return put_user(0L, (unsigned long __user *)argp);
+ case TIOCSERGETLSR: /* Get line status register */
+ return get_lsr_info(info, argp);
+ case TIOCSERSWILD:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ return 0;
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+ spin_lock_irqsave(&info->lock, flags);
+ cprev = info->icount; /* note the counters on entry */
+ spin_unlock_irqrestore(&info->lock, flags);
+ while (1) {
+ /* FIXME: convert to new style wakeup */
+ interruptible_sleep_on(&info->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
spin_lock_irqsave(&info->lock, flags);
- cprev = info->icount; /* note the counters on entry */
+ cnow = info->icount; /* atomic copy */
spin_unlock_irqrestore(&info->lock, flags);
- while (1) {
- /* FIXME: convert to new style wakeup */
- interruptible_sleep_on(&info->delta_msr_wait);
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
- spin_lock_irqsave(&info->lock, flags);
- cnow = info->icount; /* atomic copy */
- spin_unlock_irqrestore(&info->lock, flags);
- if (cnow.rng == cprev.rng &&
- cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd &&
- cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
- if (((arg & TIOCM_RNG) &&
- (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) &&
- (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) &&
- (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) &&
- (cnow.cts != cprev.cts)) ) {
- return 0;
- }
- cprev = cnow;
+ if (cnow.rng == cprev.rng &&
+ cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd &&
+ cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) &&
+ (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) &&
+ (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) &&
+ (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) &&
+ (cnow.cts != cprev.cts))) {
+ return 0;
}
- /* NOTREACHED */
-
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock, flags);
- p_cuser = argp;
- if (put_user(cnow.cts, &p_cuser->cts) ||
- put_user(cnow.dsr, &p_cuser->dsr) ||
- put_user(cnow.rng, &p_cuser->rng) ||
- put_user(cnow.dcd, &p_cuser->dcd))
- return -EFAULT;
-
+ cprev = cnow;
+ }
+ /* NOTREACHED */
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ spin_lock_irqsave(&info->lock, flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock, flags);
+ p_cuser = argp;
+ if (put_user(cnow.cts, &p_cuser->cts) ||
+ put_user(cnow.dsr, &p_cuser->dsr) ||
+ put_user(cnow.rng, &p_cuser->rng) ||
+ put_user(cnow.dcd, &p_cuser->dcd))
+ return -EFAULT;
return 0;
case TIOCGHAYESESP:
return get_esp_config(info, argp);
case TIOCSHAYESESP:
- return set_esp_config(info, argp);
-
- default:
- return -ENOIOCTLCMD;
- }
+ lock_kernel();
+ ret = set_esp_config(info, argp);
+ unlock_kernel();
+ return ret;
+ default:
+ return -ENOIOCTLCMD;
+ }
return 0;
}
static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
change_speed(info);
@@ -1905,32 +1893,33 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/*
* ------------------------------------------------------------
* rs_close()
- *
+ *
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* async structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
* ------------------------------------------------------------
*/
-static void rs_close(struct tty_struct *tty, struct file * filp)
+static void rs_close(struct tty_struct *tty, struct file *filp)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
return;
-
+
spin_lock_irqsave(&info->lock, flags);
-
+
if (tty_hung_up_p(filp)) {
DBG_CNT("before DEC-hung");
goto out;
}
-
+
#ifdef SERIAL_DEBUG_OPEN
- printk("rs_close ttys%d, count = %d\n", info->line, info->count);
+ printk(KERN_DEBUG "rs_close ttys%d, count = %d\n",
+ info->line, info->count);
#endif
- if ((tty->count == 1) && (info->count != 1)) {
+ if (tty->count == 1 && info->count != 1) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -1938,12 +1927,11 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
- printk("rs_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
+ printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
- printk("rs_close: bad serial port count for ttys%d: %d\n",
+ printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
info->line, info->count);
info->count = 0;
}
@@ -1955,7 +1943,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
spin_unlock_irqrestore(&info->lock, flags);
/*
- * Now we wait for the transmit buffer to clear; and we notify
+ * Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
@@ -1990,16 +1978,14 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
rs_wait_until_sent(tty, info->timeout);
}
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ rs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
info->tty = NULL;
if (info->blocked_open) {
- if (info->close_delay) {
+ if (info->close_delay)
msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@@ -2012,7 +1998,7 @@ out:
static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long orig_jiffies, char_time;
unsigned long flags;
@@ -2036,10 +2022,10 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
- break;
+ return;
if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
+ return;
spin_lock_irqsave(&info->lock, flags);
serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND);
@@ -2054,11 +2040,11 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
*/
static void esp_hangup(struct tty_struct *tty)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
-
+ struct esp_struct *info = tty->driver_data;
+
if (serial_paranoia_check(info, tty->name, "esp_hangup"))
return;
-
+
rs_flush_buffer(tty);
shutdown(info);
info->count = 0;
@@ -2072,7 +2058,7 @@ static void esp_hangup(struct tty_struct *tty)
* esp_open() and friends
* ------------------------------------------------------------
*/
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
struct esp_struct *info)
{
DECLARE_WAITQUEUE(wait, current);
@@ -2121,11 +2107,11 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
retval = 0;
add_wait_queue(&info->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttys%d, count = %d\n",
+ printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n",
info->line, info->count);
#endif
spin_lock_irqsave(&info->lock, flags);
- if (!tty_hung_up_p(filp))
+ if (!tty_hung_up_p(filp))
info->count--;
info->blocked_open++;
while (1) {
@@ -2147,7 +2133,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
- retval = -ERESTARTSYS;
+ retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
@@ -2166,7 +2152,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
break;
}
#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttys%d, count = %d\n",
+ printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n",
info->line, info->count);
#endif
spin_unlock_irqrestore(&info->lock, flags);
@@ -2180,14 +2166,14 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
info->blocked_open--;
spin_unlock_irqrestore(&info->lock, flags);
#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttys%d, count = %d\n",
+ printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n",
info->line, info->count);
#endif
if (retval)
return retval;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
-}
+}
/*
* This routine is called whenever a serial port is opened. It
@@ -2195,7 +2181,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
-static int esp_open(struct tty_struct *tty, struct file * filp)
+static int esp_open(struct tty_struct *tty, struct file *filp)
{
struct esp_struct *info;
int retval, line;
@@ -2218,7 +2204,7 @@ static int esp_open(struct tty_struct *tty, struct file * filp)
}
#ifdef SERIAL_DEBUG_OPEN
- printk("esp_open %s, count = %d\n", tty->name, info->count);
+ printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->count);
#endif
spin_lock_irqsave(&info->lock, flags);
info->count++;
@@ -2226,7 +2212,7 @@ static int esp_open(struct tty_struct *tty, struct file * filp)
info->tty = tty;
spin_unlock_irqrestore(&info->lock, flags);
-
+
/*
* Start up serial port
*/
@@ -2237,14 +2223,13 @@ static int esp_open(struct tty_struct *tty, struct file * filp)
retval = block_til_ready(tty, filp, info);
if (retval) {
#ifdef SERIAL_DEBUG_OPEN
- printk("esp_open returning after block_til_ready with %d\n",
+ printk(KERN_DEBUG "esp_open returning after block_til_ready with %d\n",
retval);
#endif
return retval;
}
-
#ifdef SERIAL_DEBUG_OPEN
- printk("esp_open %s successful...", tty->name);
+ printk(KERN_DEBUG "esp_open %s successful...", tty->name);
#endif
return 0;
}
@@ -2262,10 +2247,10 @@ static int esp_open(struct tty_struct *tty, struct file * filp)
* number, and identifies which options were configured into this
* driver.
*/
-
-static inline void show_serial_version(void)
+
+static void show_serial_version(void)
{
- printk(KERN_INFO "%s version %s (DMA %u)\n",
+ printk(KERN_INFO "%s version %s (DMA %u)\n",
serial_name, serial_version, dma);
}
@@ -2273,7 +2258,7 @@ static inline void show_serial_version(void)
* This routine is called by espserial_init() to initialize a specific serial
* port.
*/
-static inline int autoconfig(struct esp_struct * info)
+static int autoconfig(struct esp_struct *info)
{
int port_detected = 0;
unsigned long flags;
@@ -2349,14 +2334,14 @@ static const struct tty_operations esp_ops = {
static int __init espserial_init(void)
{
int i, offset;
- struct esp_struct * info;
+ struct esp_struct *info;
struct esp_struct *last_primary = NULL;
- int esp[] = {0x100,0x140,0x180,0x200,0x240,0x280,0x300,0x380};
+ int esp[] = { 0x100, 0x140, 0x180, 0x200, 0x240, 0x280, 0x300, 0x380 };
esp_driver = alloc_tty_driver(NR_PORTS);
if (!esp_driver)
return -ENOMEM;
-
+
for (i = 0; i < NR_PRIMARY; i++) {
if (irq[i] != 0) {
if ((irq[i] < 2) || (irq[i] > 15) || (irq[i] == 6) ||
@@ -2378,20 +2363,20 @@ static int __init espserial_init(void)
if ((flow_off < 1) || (flow_off > 1023))
flow_off = 1016;
-
+
if ((flow_on < 1) || (flow_on > 1023))
flow_on = 944;
if ((rx_timeout < 0) || (rx_timeout > 255))
rx_timeout = 128;
-
+
if (flow_on >= flow_off)
flow_on = flow_off - 1;
show_serial_version();
/* Initialize the tty_driver structure */
-
+
esp_driver->owner = THIS_MODULE;
esp_driver->name = "ttyP";
esp_driver->major = ESP_IN_MAJOR;
@@ -2401,10 +2386,11 @@ static int __init espserial_init(void)
esp_driver->init_termios = tty_std_termios;
esp_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ esp_driver->init_termios.c_ispeed = 9600;
+ esp_driver->init_termios.c_ospeed = 9600;
esp_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(esp_driver, &esp_ops);
- if (tty_register_driver(esp_driver))
- {
+ if (tty_register_driver(esp_driver)) {
printk(KERN_ERR "Couldn't register esp serial driver");
put_tty_driver(esp_driver);
return 1;
@@ -2412,8 +2398,7 @@ static int __init espserial_init(void)
info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL);
- if (!info)
- {
+ if (!info) {
printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
tty_unregister_driver(esp_driver);
put_tty_driver(esp_driver);
@@ -2476,10 +2461,8 @@ static int __init espserial_init(void)
info->stat_flags |= ESP_STAT_NEVER_DMA;
info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL);
- if (!info)
- {
- printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
-
+ if (!info) {
+ printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
/* allow use of the already detected ports */
return 0;
}
@@ -2503,22 +2486,20 @@ static int __init espserial_init(void)
return 0;
}
-static void __exit espserial_exit(void)
+static void __exit espserial_exit(void)
{
int e1;
struct esp_struct *temp_async;
struct esp_pio_buffer *pio_buf;
- /* printk("Unloading %s: version %s\n", serial_name, serial_version); */
- if ((e1 = tty_unregister_driver(esp_driver)))
- printk("SERIAL: failed to unregister serial driver (%d)\n",
- e1);
+ e1 = tty_unregister_driver(esp_driver);
+ if (e1)
+ printk(KERN_ERR "esp: failed to unregister driver (%d)\n", e1);
put_tty_driver(esp_driver);
while (ports) {
- if (ports->port) {
+ if (ports->port)
release_region(ports->port, REGION_SIZE);
- }
temp_async = ports->next_port;
kfree(ports);
ports = temp_async;
diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c
index 7ed7da1d99c..252f73e4859 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/char/generic_serial.c
@@ -40,27 +40,27 @@ static int gs_debug;
#define gs_dprintk(f, str...) /* nothing */
#endif
-#define func_enter() gs_dprintk (GS_DEBUG_FLOW, "gs: enter %s\n", __FUNCTION__)
-#define func_exit() gs_dprintk (GS_DEBUG_FLOW, "gs: exit %s\n", __FUNCTION__)
+#define func_enter() gs_dprintk (GS_DEBUG_FLOW, "gs: enter %s\n", __func__)
+#define func_exit() gs_dprintk (GS_DEBUG_FLOW, "gs: exit %s\n", __func__)
#define RS_EVENT_WRITE_WAKEUP 1
module_param(gs_debug, int, 0644);
-void gs_put_char(struct tty_struct * tty, unsigned char ch)
+int gs_put_char(struct tty_struct * tty, unsigned char ch)
{
struct gs_port *port;
func_enter ();
- if (!tty) return;
+ if (!tty) return 0;
port = tty->driver_data;
- if (!port) return;
+ if (!port) return 0;
- if (! (port->flags & ASYNC_INITIALIZED)) return;
+ if (! (port->flags & ASYNC_INITIALIZED)) return 0;
/* Take a lock on the serial tranmit buffer! */
mutex_lock(& port->port_write_mutex);
@@ -68,7 +68,7 @@ void gs_put_char(struct tty_struct * tty, unsigned char ch)
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
/* Sorry, buffer is full, drop character. Update statistics???? -- REW */
mutex_unlock(&port->port_write_mutex);
- return;
+ return 0;
}
port->xmit_buf[port->xmit_head++] = ch;
@@ -77,6 +77,7 @@ void gs_put_char(struct tty_struct * tty, unsigned char ch)
mutex_unlock(&port->port_write_mutex);
func_exit ();
+ return 1;
}
@@ -586,8 +587,7 @@ void gs_close(struct tty_struct * tty, struct file * filp)
port->flags &= ~GS_ACTIVE;
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ gs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 1399971be68..e7fb0bca366 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -308,7 +308,7 @@ static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
PAGE_SIZE, vma->vm_page_prot)) {
printk(KERN_ERR "%s: io_remap_pfn_range failed\n",
- __FUNCTION__);
+ __func__);
return -EAGAIN;
}
@@ -748,7 +748,7 @@ int hpet_alloc(struct hpet_data *hdp)
*/
if (hpet_is_known(hdp)) {
printk(KERN_DEBUG "%s: duplicate HPET ignored\n",
- __FUNCTION__);
+ __func__);
return 0;
}
@@ -869,7 +869,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
if (hpet_is_known(hdp)) {
printk(KERN_DEBUG "%s: 0x%lx is busy\n",
- __FUNCTION__, hdp->hd_phys_address);
+ __func__, hdp->hd_phys_address);
iounmap(hdp->hd_address);
return AE_ALREADY_EXISTS;
}
@@ -886,7 +886,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
if (hpet_is_known(hdp)) {
printk(KERN_DEBUG "%s: 0x%lx is busy\n",
- __FUNCTION__, hdp->hd_phys_address);
+ __func__, hdp->hd_phys_address);
iounmap(hdp->hd_address);
return AE_ALREADY_EXISTS;
}
@@ -925,7 +925,7 @@ static int hpet_acpi_add(struct acpi_device *device)
return -ENODEV;
if (!data.hd_address || !data.hd_nirqs) {
- printk("%s: no address or irqs in _CRS\n", __FUNCTION__);
+ printk("%s: no address or irqs in _CRS\n", __func__);
return -ENODEV;
}
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index d5a752da322..59c6f9ab94e 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -246,7 +246,7 @@ static void compact_inbuf(struct hvsi_struct *hp, uint8_t *read_to)
{
int remaining = (int)(hp->inbuf_end - read_to);
- pr_debug("%s: %i chars remain\n", __FUNCTION__, remaining);
+ pr_debug("%s: %i chars remain\n", __func__, remaining);
if (read_to != hp->inbuf)
memmove(hp->inbuf, read_to, remaining);
@@ -365,7 +365,7 @@ static int hvsi_version_respond(struct hvsi_struct *hp, uint16_t query_seqno)
packet.u.version = HVSI_VERSION;
packet.query_seqno = query_seqno+1;
- pr_debug("%s: sending %i bytes\n", __FUNCTION__, packet.len);
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
dbg_dump_hex((uint8_t*)&packet, packet.len);
wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
@@ -437,7 +437,7 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
return NULL;
if (overflow > 0) {
- pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __FUNCTION__);
+ pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__);
datalen = TTY_THRESHOLD_THROTTLE;
}
@@ -448,7 +448,7 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
* we still have more data to deliver, so we need to save off the
* overflow and send it later
*/
- pr_debug("%s: deferring overflow\n", __FUNCTION__);
+ pr_debug("%s: deferring overflow\n", __func__);
memcpy(hp->throttle_buf, data + TTY_THRESHOLD_THROTTLE, overflow);
hp->n_throttle = overflow;
}
@@ -474,11 +474,11 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ);
if (chunklen == 0) {
- pr_debug("%s: 0-length read\n", __FUNCTION__);
+ pr_debug("%s: 0-length read\n", __func__);
return 0;
}
- pr_debug("%s: got %i bytes\n", __FUNCTION__, chunklen);
+ pr_debug("%s: got %i bytes\n", __func__, chunklen);
dbg_dump_hex(hp->inbuf_end, chunklen);
hp->inbuf_end += chunklen;
@@ -495,7 +495,7 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
continue;
}
- pr_debug("%s: handling %i-byte packet\n", __FUNCTION__,
+ pr_debug("%s: handling %i-byte packet\n", __func__,
len_packet(packet));
dbg_dump_packet(packet);
@@ -526,7 +526,7 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
packet += len_packet(packet);
if (*hangup || *handshake) {
- pr_debug("%s: hangup or handshake\n", __FUNCTION__);
+ pr_debug("%s: hangup or handshake\n", __func__);
/*
* we need to send the hangup now before receiving any more data.
* If we get "data, hangup, data", we can't deliver the second
@@ -543,7 +543,7 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
static void hvsi_send_overflow(struct hvsi_struct *hp)
{
- pr_debug("%s: delivering %i bytes overflow\n", __FUNCTION__,
+ pr_debug("%s: delivering %i bytes overflow\n", __func__,
hp->n_throttle);
hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle);
@@ -563,7 +563,7 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
unsigned long flags;
int again = 1;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
while (again) {
spin_lock_irqsave(&hp->lock, flags);
@@ -647,7 +647,7 @@ static int hvsi_query(struct hvsi_struct *hp, uint16_t verb)
packet.seqno = atomic_inc_return(&hp->seqno);
packet.verb = verb;
- pr_debug("%s: sending %i bytes\n", __FUNCTION__, packet.len);
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
dbg_dump_hex((uint8_t*)&packet, packet.len);
wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
@@ -674,7 +674,7 @@ static int hvsi_get_mctrl(struct hvsi_struct *hp)
return ret;
}
- pr_debug("%s: mctrl 0x%x\n", __FUNCTION__, hp->mctrl);
+ pr_debug("%s: mctrl 0x%x\n", __func__, hp->mctrl);
return 0;
}
@@ -694,7 +694,7 @@ static int hvsi_set_mctrl(struct hvsi_struct *hp, uint16_t mctrl)
if (mctrl & TIOCM_DTR)
packet.word = HVSI_TSDTR;
- pr_debug("%s: sending %i bytes\n", __FUNCTION__, packet.len);
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
dbg_dump_hex((uint8_t*)&packet, packet.len);
wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
@@ -790,7 +790,7 @@ static void hvsi_close_protocol(struct hvsi_struct *hp)
packet.len = 6;
packet.verb = VSV_CLOSE_PROTOCOL;
- pr_debug("%s: sending %i bytes\n", __FUNCTION__, packet.len);
+ pr_debug("%s: sending %i bytes\n", __func__, packet.len);
dbg_dump_hex((uint8_t*)&packet, packet.len);
hvc_put_chars(hp->vtermno, (char *)&packet, packet.len);
@@ -803,7 +803,7 @@ static int hvsi_open(struct tty_struct *tty, struct file *filp)
int line = tty->index;
int ret;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
if (line < 0 || line >= hvsi_count)
return -ENODEV;
@@ -868,7 +868,7 @@ static void hvsi_close(struct tty_struct *tty, struct file *filp)
struct hvsi_struct *hp = tty->driver_data;
unsigned long flags;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
if (tty_hung_up_p(filp))
return;
@@ -920,7 +920,7 @@ static void hvsi_hangup(struct tty_struct *tty)
struct hvsi_struct *hp = tty->driver_data;
unsigned long flags;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
spin_lock_irqsave(&hp->lock, flags);
@@ -942,7 +942,7 @@ static void hvsi_push(struct hvsi_struct *hp)
n = hvsi_put_chars(hp, hp->outbuf, hp->n_outbuf);
if (n > 0) {
/* success */
- pr_debug("%s: wrote %i chars\n", __FUNCTION__, n);
+ pr_debug("%s: wrote %i chars\n", __func__, n);
hp->n_outbuf = 0;
} else if (n == -EIO) {
__set_state(hp, HVSI_FSP_DIED);
@@ -965,7 +965,7 @@ static void hvsi_write_worker(struct work_struct *work)
spin_lock_irqsave(&hp->lock, flags);
- pr_debug("%s: %i chars in buffer\n", __FUNCTION__, hp->n_outbuf);
+ pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf);
if (!is_open(hp)) {
/*
@@ -983,7 +983,7 @@ static void hvsi_write_worker(struct work_struct *work)
schedule_delayed_work(&hp->writer, 10);
else {
#ifdef DEBUG
- pr_debug("%s: outbuf emptied after %li jiffies\n", __FUNCTION__,
+ pr_debug("%s: outbuf emptied after %li jiffies\n", __func__,
jiffies - start_j);
start_j = 0;
#endif /* DEBUG */
@@ -1020,11 +1020,11 @@ static int hvsi_write(struct tty_struct *tty,
spin_lock_irqsave(&hp->lock, flags);
- pr_debug("%s: %i chars in buffer\n", __FUNCTION__, hp->n_outbuf);
+ pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf);
if (!is_open(hp)) {
/* we're either closing or not yet open; don't accept data */
- pr_debug("%s: not open\n", __FUNCTION__);
+ pr_debug("%s: not open\n", __func__);
goto out;
}
@@ -1058,7 +1058,7 @@ out:
spin_unlock_irqrestore(&hp->lock, flags);
if (total != origcount)
- pr_debug("%s: wanted %i, only wrote %i\n", __FUNCTION__, origcount,
+ pr_debug("%s: wanted %i, only wrote %i\n", __func__, origcount,
total);
return total;
@@ -1072,7 +1072,7 @@ static void hvsi_throttle(struct tty_struct *tty)
{
struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE);
}
@@ -1083,7 +1083,7 @@ static void hvsi_unthrottle(struct tty_struct *tty)
unsigned long flags;
int shouldflip = 0;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
spin_lock_irqsave(&hp->lock, flags);
if (hp->n_throttle) {
@@ -1302,7 +1302,7 @@ static int __init hvsi_console_init(void)
hp->virq = irq_create_mapping(NULL, irq[0]);
if (hp->virq == NO_IRQ) {
printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
- __FUNCTION__, irq[0]);
+ __func__, irq[0]);
continue;
}
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index 8609b8236c6..b60d425ce8d 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -77,11 +77,16 @@ static int power_status;
module_param(power_status, bool, 0600);
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
+static int fan_mult = I8K_FAN_MULT;
+module_param(fan_mult, int, 0);
+MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with");
+
static int i8k_open_fs(struct inode *inode, struct file *file);
static int i8k_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
static const struct file_operations i8k_fops = {
+ .owner = THIS_MODULE,
.open = i8k_open_fs,
.read = seq_read,
.llseek = seq_lseek,
@@ -238,7 +243,7 @@ static int i8k_get_fan_speed(int fan)
struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
regs.ebx = fan & 0xff;
- return i8k_smm(&regs) ? : (regs.eax & 0xffff) * I8K_FAN_MULT;
+ return i8k_smm(&regs) ? : (regs.eax & 0xffff) * fan_mult;
}
/*
@@ -554,13 +559,10 @@ static int __init i8k_init(void)
return -ENODEV;
/* Register the proc entry */
- proc_i8k = create_proc_entry("i8k", 0, NULL);
+ proc_i8k = proc_create("i8k", 0, NULL, &i8k_fops);
if (!proc_i8k)
return -ENOENT;
- proc_i8k->proc_fops = &i8k_fops;
- proc_i8k->owner = THIS_MODULE;
-
printk(KERN_INFO
"Dell laptop SMM driver v%s Massimo Dal Zotto (dz@debian.org)\n",
I8K_VERSION);
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c
index 61ef013b844..3601017f58c 100644
--- a/drivers/char/ip2/i2ellis.c
+++ b/drivers/char/ip2/i2ellis.c
@@ -53,7 +53,7 @@ static int ii2Safe; // Safe I/O address for delay routine
static int iiDelayed; // Set when the iiResetDelay function is
// called. Cleared when ANY board is reset.
-static rwlock_t Dl_spinlock;
+static DEFINE_RWLOCK(Dl_spinlock);
//********
//* Code *
@@ -82,7 +82,6 @@ static rwlock_t Dl_spinlock;
static void
iiEllisInit(void)
{
- LOCK_INIT(&Dl_spinlock);
}
//******************************************************************************
@@ -132,7 +131,7 @@ iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay )
|| (address & 0x7)
)
{
- COMPLETE(pB,I2EE_BADADDR);
+ I2_COMPLETE(pB, I2EE_BADADDR);
}
// Initialize accelerators
@@ -152,7 +151,7 @@ iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay )
pB->i2eValid = I2E_MAGIC;
pB->i2eState = II_STATE_COLD;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -177,12 +176,12 @@ iiReset(i2eBordStrPtr pB)
// Magic number should be set, else even the address is suspect
if (pB->i2eValid != I2E_MAGIC)
{
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
- OUTB(pB->i2eBase + FIFO_RESET, 0); // Any data will do
+ outb(0, pB->i2eBase + FIFO_RESET); /* Any data will do */
iiDelay(pB, 50); // Pause between resets
- OUTB(pB->i2eBase + FIFO_RESET, 0); // Second reset
+ outb(0, pB->i2eBase + FIFO_RESET); /* Second reset */
// We must wait before even attempting to read anything from the FIFO: the
// board's P.O.S.T may actually attempt to read and write its end of the
@@ -203,7 +202,7 @@ iiReset(i2eBordStrPtr pB)
// Ensure anything which would have been of use to standard loadware is
// blanked out, since board has now forgotten everything!.
- pB->i2eUsingIrq = IRQ_UNDEFINED; // Not set up to use an interrupt yet
+ pB->i2eUsingIrq = I2_IRQ_UNDEFINED; /* to not use an interrupt so far */
pB->i2eWaitingForEmptyFifo = 0;
pB->i2eOutMailWaiting = 0;
pB->i2eChannelPtr = NULL;
@@ -215,7 +214,7 @@ iiReset(i2eBordStrPtr pB)
pB->i2eFatalTrap = NULL;
pB->i2eFatal = 0;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -235,14 +234,14 @@ static int
iiResetDelay(i2eBordStrPtr pB)
{
if (pB->i2eValid != I2E_MAGIC) {
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
if (pB->i2eState != II_STATE_RESET) {
- COMPLETE(pB, I2EE_BADSTATE);
+ I2_COMPLETE(pB, I2EE_BADSTATE);
}
iiDelay(pB,2000); /* Now we wait for two seconds. */
iiDelayed = 1; /* Delay has been called: ok to initialize */
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -273,12 +272,12 @@ iiInitialize(i2eBordStrPtr pB)
if (pB->i2eValid != I2E_MAGIC)
{
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
if (pB->i2eState != II_STATE_RESET || !iiDelayed)
{
- COMPLETE(pB, I2EE_BADSTATE);
+ I2_COMPLETE(pB, I2EE_BADSTATE);
}
// In case there is a failure short of our completely reading the power-up
@@ -291,13 +290,12 @@ iiInitialize(i2eBordStrPtr pB)
for (itemp = 0; itemp < sizeof(porStr); itemp++)
{
// We expect the entire message is ready.
- if (HAS_NO_INPUT(pB))
- {
+ if (!I2_HAS_INPUT(pB)) {
pB->i2ePomSize = itemp;
- COMPLETE(pB, I2EE_PORM_SHORT);
+ I2_COMPLETE(pB, I2EE_PORM_SHORT);
}
- pB->i2ePom.c[itemp] = c = BYTE_FROM(pB);
+ pB->i2ePom.c[itemp] = c = inb(pB->i2eData);
// We check the magic numbers as soon as they are supposed to be read
// (rather than after) to minimize effect of reading something we
@@ -306,22 +304,22 @@ iiInitialize(i2eBordStrPtr pB)
(itemp == POR_2_INDEX && c != POR_MAGIC_2))
{
pB->i2ePomSize = itemp+1;
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
}
pB->i2ePomSize = itemp;
// Ensure that this was all the data...
- if (HAS_INPUT(pB))
- COMPLETE(pB, I2EE_PORM_LONG);
+ if (I2_HAS_INPUT(pB))
+ I2_COMPLETE(pB, I2EE_PORM_LONG);
// For now, we'll fail to initialize if P.O.S.T reports bad chip mapper:
// Implying we will not be able to download any code either: That's ok: the
// condition is pretty explicit.
if (pB->i2ePom.e.porDiag1 & POR_BAD_MAPPER)
{
- COMPLETE(pB, I2EE_POSTERR);
+ I2_COMPLETE(pB, I2EE_POSTERR);
}
// Determine anything which must be done differently depending on the family
@@ -332,7 +330,7 @@ iiInitialize(i2eBordStrPtr pB)
pB->i2eFifoStyle = FIFO_II;
pB->i2eFifoSize = 512; // 512 bytes, always
- pB->i2eDataWidth16 = NO;
+ pB->i2eDataWidth16 = false;
pB->i2eMaxIrq = 15; // Because board cannot tell us it is in an 8-bit
// slot, we do allow it to be done (documentation!)
@@ -354,7 +352,7 @@ iiInitialize(i2eBordStrPtr pB)
// should always be consistent for IntelliPort-II. Ditto below...
if (pB->i2ePom.e.porPorts1 != 4)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
break;
@@ -364,7 +362,7 @@ iiInitialize(i2eBordStrPtr pB)
pB->i2eChannelMap[0] = 0xff; // Eight port
if (pB->i2ePom.e.porPorts1 != 8)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
break;
@@ -373,7 +371,7 @@ iiInitialize(i2eBordStrPtr pB)
pB->i2eChannelMap[0] = 0x3f; // Six Port
if (pB->i2ePom.e.porPorts1 != 6)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
break;
}
@@ -402,7 +400,7 @@ iiInitialize(i2eBordStrPtr pB)
if (itemp < 8 || itemp > 15)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
pB->i2eFifoSize = (1 << itemp);
@@ -450,26 +448,26 @@ iiInitialize(i2eBordStrPtr pB)
switch (pB->i2ePom.e.porBus & (POR_BUS_SLOT16 | POR_BUS_DIP16) )
{
case POR_BUS_SLOT16 | POR_BUS_DIP16:
- pB->i2eDataWidth16 = YES;
+ pB->i2eDataWidth16 = true;
pB->i2eMaxIrq = 15;
break;
case POR_BUS_SLOT16:
- pB->i2eDataWidth16 = NO;
+ pB->i2eDataWidth16 = false;
pB->i2eMaxIrq = 15;
break;
case 0:
case POR_BUS_DIP16: // In an 8-bit slot, DIP switch don't care.
default:
- pB->i2eDataWidth16 = NO;
+ pB->i2eDataWidth16 = false;
pB->i2eMaxIrq = 7;
break;
}
break; // POR_ID_FIIEX case
default: // Unknown type of board
- COMPLETE(pB, I2EE_BAD_FAMILY);
+ I2_COMPLETE(pB, I2EE_BAD_FAMILY);
break;
} // End the switch based on family
@@ -483,17 +481,14 @@ iiInitialize(i2eBordStrPtr pB)
{
case POR_BUS_T_ISA:
case POR_BUS_T_UNK: // If the type of bus is undeclared, assume ok.
- pB->i2eChangeIrq = YES;
- break;
case POR_BUS_T_MCA:
case POR_BUS_T_EISA:
- pB->i2eChangeIrq = NO;
break;
default:
- COMPLETE(pB, I2EE_BADBUS);
+ I2_COMPLETE(pB, I2EE_BADBUS);
}
- if (pB->i2eDataWidth16 == YES)
+ if (pB->i2eDataWidth16)
{
pB->i2eWriteBuf = iiWriteBuf16;
pB->i2eReadBuf = iiReadBuf16;
@@ -529,7 +524,7 @@ iiInitialize(i2eBordStrPtr pB)
break;
default:
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
// Initialize state information.
@@ -549,7 +544,7 @@ iiInitialize(i2eBordStrPtr pB)
// Everything is ok now, return with good status/
pB->i2eValid = I2E_MAGIC;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -658,7 +653,7 @@ ii2DelayIO(unsigned int mseconds)
while(mseconds--) {
int i = ii2DelValue;
while ( i-- ) {
- INB ( ii2Safe );
+ inb(ii2Safe);
}
}
}
@@ -709,11 +704,11 @@ iiWriteBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
{
// Rudimentary sanity checking here.
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- OUTSW ( pB->i2eData, address, count);
+ I2_OUTSW(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -738,11 +733,11 @@ iiWriteBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
{
/* Rudimentary sanity checking here */
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- OUTSB ( pB->i2eData, address, count );
+ I2_OUTSB(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -767,11 +762,11 @@ iiReadBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
{
// Rudimentary sanity checking here.
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- INSW ( pB->i2eData, address, count);
+ I2_INSW(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -796,11 +791,11 @@ iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
{
// Rudimentary sanity checking here.
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- INSB ( pB->i2eData, address, count);
+ I2_INSB(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -820,7 +815,7 @@ iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
static unsigned short
iiReadWord16(i2eBordStrPtr pB)
{
- return (unsigned short)( INW(pB->i2eData) );
+ return inw(pB->i2eData);
}
//******************************************************************************
@@ -842,9 +837,9 @@ iiReadWord8(i2eBordStrPtr pB)
{
unsigned short urs;
- urs = INB ( pB->i2eData );
+ urs = inb(pB->i2eData);
- return ( ( INB ( pB->i2eData ) << 8 ) | urs );
+ return (inb(pB->i2eData) << 8) | urs;
}
//******************************************************************************
@@ -865,7 +860,7 @@ iiReadWord8(i2eBordStrPtr pB)
static void
iiWriteWord16(i2eBordStrPtr pB, unsigned short value)
{
- WORD_TO(pB, (int)value);
+ outw((int)value, pB->i2eData);
}
//******************************************************************************
@@ -886,8 +881,8 @@ iiWriteWord16(i2eBordStrPtr pB, unsigned short value)
static void
iiWriteWord8(i2eBordStrPtr pB, unsigned short value)
{
- BYTE_TO(pB, (char)value);
- BYTE_TO(pB, (char)(value >> 8) );
+ outb((char)value, pB->i2eData);
+ outb((char)(value >> 8), pB->i2eData);
}
//******************************************************************************
@@ -939,30 +934,30 @@ iiWaitForTxEmptyII(i2eBordStrPtr pB, int mSdelay)
// interrupts of any kind.
- WRITE_LOCK_IRQSAVE(&Dl_spinlock,flags)
- OUTB(pB->i2ePointer, SEL_COMMAND);
- OUTB(pB->i2ePointer, SEL_CMD_SH);
+ write_lock_irqsave(&Dl_spinlock, flags);
+ outb(SEL_COMMAND, pB->i2ePointer);
+ outb(SEL_CMD_SH, pB->i2ePointer);
- itemp = INB(pB->i2eStatus);
+ itemp = inb(pB->i2eStatus);
- OUTB(pB->i2ePointer, SEL_COMMAND);
- OUTB(pB->i2ePointer, SEL_CMD_UNSH);
+ outb(SEL_COMMAND, pB->i2ePointer);
+ outb(SEL_CMD_UNSH, pB->i2ePointer);
if (itemp & ST_IN_EMPTY)
{
- UPDATE_FIFO_ROOM(pB);
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
- COMPLETE(pB, I2EE_GOOD);
+ I2_UPDATE_FIFO_ROOM(pB);
+ write_unlock_irqrestore(&Dl_spinlock, flags);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
+ write_unlock_irqrestore(&Dl_spinlock, flags);
if (mSdelay-- == 0)
break;
iiDelay(pB, 1); /* 1 mS granularity on checking condition */
}
- COMPLETE(pB, I2EE_TXE_TIME);
+ I2_COMPLETE(pB, I2EE_TXE_TIME);
}
//******************************************************************************
@@ -1002,21 +997,21 @@ iiWaitForTxEmptyIIEX(i2eBordStrPtr pB, int mSdelay)
// you will generally not want to service interrupts or in any way
// disrupt the assumptions implicit in the larger context.
- WRITE_LOCK_IRQSAVE(&Dl_spinlock,flags)
+ write_lock_irqsave(&Dl_spinlock, flags);
- if (INB(pB->i2eStatus) & STE_OUT_MT) {
- UPDATE_FIFO_ROOM(pB);
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
- COMPLETE(pB, I2EE_GOOD);
+ if (inb(pB->i2eStatus) & STE_OUT_MT) {
+ I2_UPDATE_FIFO_ROOM(pB);
+ write_unlock_irqrestore(&Dl_spinlock, flags);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
+ write_unlock_irqrestore(&Dl_spinlock, flags);
if (mSdelay-- == 0)
break;
iiDelay(pB, 1); // 1 mS granularity on checking condition
}
- COMPLETE(pB, I2EE_TXE_TIME);
+ I2_COMPLETE(pB, I2EE_TXE_TIME);
}
//******************************************************************************
@@ -1038,8 +1033,8 @@ static int
iiTxMailEmptyII(i2eBordStrPtr pB)
{
int port = pB->i2ePointer;
- OUTB ( port, SEL_OUTMAIL );
- return ( INB(port) == 0 );
+ outb(SEL_OUTMAIL, port);
+ return inb(port) == 0;
}
//******************************************************************************
@@ -1060,7 +1055,7 @@ iiTxMailEmptyII(i2eBordStrPtr pB)
static int
iiTxMailEmptyIIEX(i2eBordStrPtr pB)
{
- return !(INB(pB->i2eStatus) & STE_OUT_MAIL);
+ return !(inb(pB->i2eStatus) & STE_OUT_MAIL);
}
//******************************************************************************
@@ -1084,10 +1079,10 @@ iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail)
{
int port = pB->i2ePointer;
- OUTB(port, SEL_OUTMAIL);
- if (INB(port) == 0) {
- OUTB(port, SEL_OUTMAIL);
- OUTB(port, mail);
+ outb(SEL_OUTMAIL, port);
+ if (inb(port) == 0) {
+ outb(SEL_OUTMAIL, port);
+ outb(mail, port);
return 1;
}
return 0;
@@ -1112,10 +1107,9 @@ iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail)
static int
iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail)
{
- if(INB(pB->i2eStatus) & STE_OUT_MAIL) {
+ if (inb(pB->i2eStatus) & STE_OUT_MAIL)
return 0;
- }
- OUTB(pB->i2eXMail, mail);
+ outb(mail, pB->i2eXMail);
return 1;
}
@@ -1136,9 +1130,9 @@ iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail)
static unsigned short
iiGetMailII(i2eBordStrPtr pB)
{
- if (HAS_MAIL(pB)) {
- OUTB(pB->i2ePointer, SEL_INMAIL);
- return INB(pB->i2ePointer);
+ if (I2_HAS_MAIL(pB)) {
+ outb(SEL_INMAIL, pB->i2ePointer);
+ return inb(pB->i2ePointer);
} else {
return NO_MAIL_HERE;
}
@@ -1161,11 +1155,10 @@ iiGetMailII(i2eBordStrPtr pB)
static unsigned short
iiGetMailIIEX(i2eBordStrPtr pB)
{
- if (HAS_MAIL(pB)) {
- return INB(pB->i2eXMail);
- } else {
+ if (I2_HAS_MAIL(pB))
+ return inb(pB->i2eXMail);
+ else
return NO_MAIL_HERE;
- }
}
//******************************************************************************
@@ -1184,8 +1177,8 @@ iiGetMailIIEX(i2eBordStrPtr pB)
static void
iiEnableMailIrqII(i2eBordStrPtr pB)
{
- OUTB(pB->i2ePointer, SEL_MASK);
- OUTB(pB->i2ePointer, ST_IN_MAIL);
+ outb(SEL_MASK, pB->i2ePointer);
+ outb(ST_IN_MAIL, pB->i2ePointer);
}
//******************************************************************************
@@ -1204,7 +1197,7 @@ iiEnableMailIrqII(i2eBordStrPtr pB)
static void
iiEnableMailIrqIIEX(i2eBordStrPtr pB)
{
- OUTB(pB->i2eXMask, MX_IN_MAIL);
+ outb(MX_IN_MAIL, pB->i2eXMask);
}
//******************************************************************************
@@ -1223,8 +1216,8 @@ iiEnableMailIrqIIEX(i2eBordStrPtr pB)
static void
iiWriteMaskII(i2eBordStrPtr pB, unsigned char value)
{
- OUTB(pB->i2ePointer, SEL_MASK);
- OUTB(pB->i2ePointer, value);
+ outb(SEL_MASK, pB->i2ePointer);
+ outb(value, pB->i2ePointer);
}
//******************************************************************************
@@ -1243,7 +1236,7 @@ iiWriteMaskII(i2eBordStrPtr pB, unsigned char value)
static void
iiWriteMaskIIEX(i2eBordStrPtr pB, unsigned char value)
{
- OUTB(pB->i2eXMask, value);
+ outb(value, pB->i2eXMask);
}
//******************************************************************************
@@ -1354,9 +1347,8 @@ iiDownloadBlock ( i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard)
// immediately and be harmless, though not strictly necessary.
itemp = MAX_DLOAD_ACK_TIME/10;
while (--itemp) {
- if (HAS_INPUT(pB)) {
- switch(BYTE_FROM(pB))
- {
+ if (I2_HAS_INPUT(pB)) {
+ switch (inb(pB->i2eData)) {
case LOADWARE_OK:
pB->i2eState =
isStandard ? II_STATE_STDLOADED :II_STATE_LOADED;
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h
index 433305062fb..c88a64e527a 100644
--- a/drivers/char/ip2/i2ellis.h
+++ b/drivers/char/ip2/i2ellis.h
@@ -185,10 +185,6 @@ typedef struct _i2eBordStr
// The highest allowable IRQ, based on the
// slot size.
- unsigned char i2eChangeIrq;
- // Whether tis valid to change IRQ's
- // ISA = ok, EISA, MicroChannel, no
-
// Accelerators for various addresses on the board
int i2eBase; // I/O Address of the Board
int i2eData; // From here data transfers happen
@@ -431,12 +427,6 @@ typedef struct _i2eBordStr
// Manifests for i2eBordStr:
//-------------------------------------------
-#define YES 1
-#define NO 0
-
-#define NULLFUNC (void (*)(void))0
-#define NULLPTR (void *)0
-
typedef void (*delayFunc_t)(unsigned int);
// i2eValid
@@ -494,8 +484,8 @@ typedef void (*delayFunc_t)(unsigned int);
// i2eUsingIrq
//
-#define IRQ_UNDEFINED 0x1352 // No valid irq (or polling = 0) can ever
- // promote to this!
+#define I2_IRQ_UNDEFINED 0x1352 /* No valid irq (or polling = 0) can
+ * ever promote to this! */
//------------------------------------------
// Handy Macros for i2ellis.c and others
// Note these are common to -II and -IIEX
@@ -504,41 +494,14 @@ typedef void (*delayFunc_t)(unsigned int);
// Given a pointer to the board structure, does the input FIFO have any data or
// not?
//
-#define HAS_INPUT(pB) !(INB(pB->i2eStatus) & ST_IN_EMPTY)
-#define HAS_NO_INPUT(pB) (INB(pB->i2eStatus) & ST_IN_EMPTY)
-
-// Given a pointer to board structure, read a byte or word from the fifo
-//
-#define BYTE_FROM(pB) (unsigned char)INB(pB->i2eData)
-#define WORD_FROM(pB) (unsigned short)INW(pB->i2eData)
-
-// Given a pointer to board structure, is there room for any data to be written
-// to the data fifo?
-//
-#define HAS_OUTROOM(pB) !(INB(pB->i2eStatus) & ST_OUT_FULL)
-#define HAS_NO_OUTROOM(pB) (INB(pB->i2eStatus) & ST_OUT_FULL)
-
-// Given a pointer to board structure, write a single byte to the fifo
-// structure. Note that for 16-bit interfaces, the high order byte is undefined
-// and unknown.
-//
-#define BYTE_TO(pB, c) OUTB(pB->i2eData,(c))
-
-// Write a word to the fifo structure. For 8-bit interfaces, this may have
-// unknown results.
-//
-#define WORD_TO(pB, c) OUTW(pB->i2eData,(c))
+#define I2_HAS_INPUT(pB) !(inb(pB->i2eStatus) & ST_IN_EMPTY)
// Given a pointer to the board structure, is there anything in the incoming
// mailbox?
//
-#define HAS_MAIL(pB) (INB(pB->i2eStatus) & ST_IN_MAIL)
+#define I2_HAS_MAIL(pB) (inb(pB->i2eStatus) & ST_IN_MAIL)
-#define UPDATE_FIFO_ROOM(pB) (pB)->i2eFifoRemains=(pB)->i2eFifoSize
-
-// Handy macro to round up a number (like the buffer write and read routines do)
-//
-#define ROUNDUP(number) (((number)+1) & (~1))
+#define I2_UPDATE_FIFO_ROOM(pB) ((pB)->i2eFifoRemains = (pB)->i2eFifoSize)
//------------------------------------------
// Function Declarations for i2ellis.c
@@ -593,20 +556,11 @@ static int iiDownloadBlock(i2eBordStrPtr, loadHdrStrPtr, int);
//
static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int);
-// Called indirectly always. Needed externally so the routine might be
-// SPECIFIED as an argument to iiReset()
-//
-//static void ii2DelayIO(unsigned int); // N-millisecond delay using
- //hardware spin
-//static void ii2DelayTimer(unsigned int); // N-millisecond delay using Linux
- //timer
-
// Many functions defined here return True if good, False otherwise, with an
// error code in i2eError field. Here is a handy macro for setting the error
// code and returning.
//
-#define COMPLETE(pB,code) \
- do { \
+#define I2_COMPLETE(pB,code) do { \
pB->i2eError = code; \
return (code == I2EE_GOOD);\
} while (0)
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 15fe04e748f..8aa6e7ab8d5 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -129,7 +129,6 @@ registers, use byte operations only.
//------------------------------------------------
//
#include "ip2types.h"
-#include "i2os.h" /* For any o.s., compiler, or host-related issues */
//-------------------------------------------------------------------------
// Manifests for the I/O map:
@@ -644,5 +643,10 @@ typedef union _loadHdrStr
#define ABS_BIGGEST_BOX 16 // Absolute the most ports per box
#define ABS_MOST_PORTS (ABS_MAX_BOXES * ABS_BIGGEST_BOX)
+#define I2_OUTSW(port, addr, count) outsw((port), (addr), (((count)+1)/2))
+#define I2_OUTSB(port, addr, count) outsb((port), (addr), (((count)+1))&-2)
+#define I2_INSW(port, addr, count) insw((port), (addr), (((count)+1)/2))
+#define I2_INSB(port, addr, count) insb((port), (addr), (((count)+1))&-2)
+
#endif // I2HW_H
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index 9c25320121e..938879cc7bc 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -227,17 +227,17 @@ i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
i2ChanStrPtr *ppCh;
if (pB->i2eValid != I2E_MAGIC) {
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
if (pB->i2eState != II_STATE_STDLOADED) {
- COMPLETE(pB, I2EE_BADSTATE);
+ I2_COMPLETE(pB, I2EE_BADSTATE);
}
- LOCK_INIT(&pB->read_fifo_spinlock);
- LOCK_INIT(&pB->write_fifo_spinlock);
- LOCK_INIT(&pB->Dbuf_spinlock);
- LOCK_INIT(&pB->Bbuf_spinlock);
- LOCK_INIT(&pB->Fbuf_spinlock);
+ rwlock_init(&pB->read_fifo_spinlock);
+ rwlock_init(&pB->write_fifo_spinlock);
+ rwlock_init(&pB->Dbuf_spinlock);
+ rwlock_init(&pB->Bbuf_spinlock);
+ rwlock_init(&pB->Fbuf_spinlock);
// NO LOCK needed yet - this is init
@@ -259,10 +259,10 @@ i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) {
continue;
}
- LOCK_INIT(&pCh->Ibuf_spinlock);
- LOCK_INIT(&pCh->Obuf_spinlock);
- LOCK_INIT(&pCh->Cbuf_spinlock);
- LOCK_INIT(&pCh->Pbuf_spinlock);
+ rwlock_init(&pCh->Ibuf_spinlock);
+ rwlock_init(&pCh->Obuf_spinlock);
+ rwlock_init(&pCh->Cbuf_spinlock);
+ rwlock_init(&pCh->Pbuf_spinlock);
// NO LOCK needed yet - this is init
// Set up validity flag according to support level
if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) {
@@ -347,7 +347,7 @@ i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
}
// No need to check for wrap here; this is initialization.
pB->i2Fbuf_stuff = stuffIndex;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
@@ -374,7 +374,7 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
case NEED_INLINE:
- WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Dbuf_spinlock, flags);
if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip)
{
queueIndex = pB->i2Dbuf_strip;
@@ -386,12 +386,12 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
pB->i2Dbuf_strip = queueIndex;
pCh->channelNeeds &= ~NEED_INLINE;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
break;
case NEED_BYPASS:
- WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Bbuf_spinlock, flags);
if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip)
{
queueIndex = pB->i2Bbuf_strip;
@@ -403,12 +403,12 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
pB->i2Bbuf_strip = queueIndex;
pCh->channelNeeds &= ~NEED_BYPASS;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
break;
case NEED_FLOW:
- WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Fbuf_spinlock, flags);
if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip)
{
queueIndex = pB->i2Fbuf_strip;
@@ -420,7 +420,7 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
pB->i2Fbuf_strip = queueIndex;
pCh->channelNeeds &= ~NEED_FLOW;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
break;
default:
printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type);
@@ -453,7 +453,7 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
case NEED_INLINE:
- WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Dbuf_spinlock, flags);
if ( !(pCh->channelNeeds & NEED_INLINE) )
{
pCh->channelNeeds |= NEED_INLINE;
@@ -463,12 +463,12 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
queueIndex = 0;
pB->i2Dbuf_stuff = queueIndex;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
break;
case NEED_BYPASS:
- WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Bbuf_spinlock, flags);
if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS))
{
pCh->channelNeeds |= NEED_BYPASS;
@@ -478,12 +478,12 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
queueIndex = 0;
pB->i2Bbuf_stuff = queueIndex;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
break;
case NEED_FLOW:
- WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Fbuf_spinlock, flags);
if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW))
{
pCh->channelNeeds |= NEED_FLOW;
@@ -493,7 +493,7 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
queueIndex = 0;
pB->i2Fbuf_stuff = queueIndex;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
break;
case NEED_CREDIT:
@@ -562,9 +562,8 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
pB = pCh->pMyBord;
// Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT
- if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == IRQ_UNDEFINED) {
+ if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED)
return -2;
- }
// If the board has gone fatal, return bad, and also hit the trap routine if
// it exists.
if (pB->i2eFatal) {
@@ -620,13 +619,13 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
switch(type) {
case PTYPE_INLINE:
lock_var_p = &pCh->Obuf_spinlock;
- WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+ write_lock_irqsave(lock_var_p, flags);
stuffIndex = pCh->Obuf_stuff;
bufroom = pCh->Obuf_strip - stuffIndex;
break;
case PTYPE_BYPASS:
lock_var_p = &pCh->Cbuf_spinlock;
- WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+ write_lock_irqsave(lock_var_p, flags);
stuffIndex = pCh->Cbuf_stuff;
bufroom = pCh->Cbuf_strip - stuffIndex;
break;
@@ -645,7 +644,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
break; /* from for()- Enough room: goto proceed */
}
ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
- WRITE_UNLOCK_IRQRESTORE(lock_var_p, flags);
+ write_unlock_irqrestore(lock_var_p, flags);
} else
ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
@@ -747,7 +746,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
{
case PTYPE_INLINE:
pCh->Obuf_stuff = stuffIndex; // Store buffer pointer
- WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
pB->debugInlineQueued++;
// Add the channel pointer to list of channels needing service (first
@@ -757,7 +756,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
case PTYPE_BYPASS:
pCh->Cbuf_stuff = stuffIndex; // Store buffer pointer
- WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
pB->debugBypassQueued++;
// Add the channel pointer to list of channels needing service (first
@@ -840,7 +839,7 @@ i2Input(i2ChanStrPtr pCh)
count = -1;
goto i2Input_exit;
}
- WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
// initialize some accelerators and private copies
stripIndex = pCh->Ibuf_strip;
@@ -850,7 +849,7 @@ i2Input(i2ChanStrPtr pCh)
// If buffer is empty or requested data count was 0, (trivial case) return
// without any further thought.
if ( count == 0 ) {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
goto i2Input_exit;
}
// Adjust for buffer wrap
@@ -891,10 +890,10 @@ i2Input(i2ChanStrPtr pCh)
if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) {
pCh->sinceLastFlow -= pCh->whenSendFlow;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
} else {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
}
i2Input_exit:
@@ -926,7 +925,7 @@ i2InputFlush(i2ChanStrPtr pCh)
ip2trace (CHANN, ITRC_INPUT, 10, 0);
- WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
// Adjust for buffer wrap
@@ -947,10 +946,10 @@ i2InputFlush(i2ChanStrPtr pCh)
if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow )
{
pCh->sinceLastFlow -= pCh->whenSendFlow;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
} else {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
}
ip2trace (CHANN, ITRC_INPUT, 19, 1, count);
@@ -979,9 +978,9 @@ i2InputAvailable(i2ChanStrPtr pCh)
// initialize some accelerators and private copies
- READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
// Adjust for buffer wrap
if (count < 0)
@@ -1045,9 +1044,9 @@ i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
while ( count > 0 ) {
// How much room in output buffer is there?
- READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Obuf_spinlock, flags);
amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
- READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
if (amountToMove < 0) {
amountToMove += OBUF_SIZE;
}
@@ -1075,7 +1074,7 @@ i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) )
&& amountToMove > 0 )
{
- WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Obuf_spinlock, flags);
stuffIndex = pCh->Obuf_stuff;
// Had room to move some data: don't know whether the block size,
@@ -1102,7 +1101,7 @@ i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
}
pCh->Obuf_stuff = stuffIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex );
@@ -1352,9 +1351,9 @@ i2OutputFree(i2ChanStrPtr pCh)
if ( !i2Validate ( pCh ) ) {
return -1;
}
- READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Obuf_spinlock, flags);
amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
- READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
if (amountToMove < 0) {
amountToMove += OBUF_SIZE;
@@ -1464,11 +1463,11 @@ i2StripFifo(i2eBordStrPtr pB)
// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 );
- while (HAS_INPUT(pB)) {
+ while (I2_HAS_INPUT(pB)) {
// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 );
// Process packet from fifo a one atomic unit
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock,bflags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, bflags);
// The first word (or two bytes) will have channel number and type of
// packet, possibly other information
@@ -1490,7 +1489,8 @@ i2StripFifo(i2eBordStrPtr pB)
// sick!
if ( ((unsigned int)count) > IBUF_SIZE ) {
pB->i2eFatal = 2;
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
return; /* Bail out ASAP */
}
// Channel is illegally big ?
@@ -1498,7 +1498,8 @@ i2StripFifo(i2eBordStrPtr pB)
(NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])))
{
iiReadBuf(pB, junkBuffer, count);
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
break; /* From switch: ready for next packet */
}
@@ -1512,14 +1513,15 @@ i2StripFifo(i2eBordStrPtr pB)
if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY)
{
pCh->hotKeyIn = iiReadWord(pB) & 0xff;
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK);
break; /* From the switch: ready for next packet */
}
// Normal data! We crudely assume there is room for the data in our
// buffer because the board wouldn't have exceeded his credit limit.
- WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,cflags);
+ write_lock_irqsave(&pCh->Ibuf_spinlock, cflags);
// We have 2 locks now
stuffIndex = pCh->Ibuf_stuff;
amountToRead = IBUF_SIZE - stuffIndex;
@@ -1562,8 +1564,9 @@ i2StripFifo(i2eBordStrPtr pB)
// Update stuff index
pCh->Ibuf_stuff = stuffIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,cflags);
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, cflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
#ifdef USE_IQ
schedule_work(&pCh->tqueue_input);
@@ -1585,7 +1588,8 @@ i2StripFifo(i2eBordStrPtr pB)
iiReadBuf(pB, cmdBuffer, count);
// We can release early with buffer grab
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
pc = cmdBuffer;
pcLimit = &(cmdBuffer[count]);
@@ -1830,12 +1834,12 @@ i2StripFifo(i2eBordStrPtr pB)
default: // Neither packet? should be impossible
ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
PTYPE_OF(pB->i2eLeadoffWord) );
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
bflags);
break;
} // End of switch on type of packets
- } //while(board HAS_INPUT)
+ } /*while(board I2_HAS_INPUT)*/
ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 );
@@ -1858,7 +1862,7 @@ i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve)
{
int rc = 0;
unsigned long flags;
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
if (!pB->i2eWaitingForEmptyFifo) {
if (pB->i2eFifoRemains > (count+reserve)) {
pB->i2eFifoRemains -= count;
@@ -1867,7 +1871,7 @@ i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve)
rc = count;
}
}
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
return rc;
}
//******************************************************************************
@@ -1898,7 +1902,7 @@ i2StuffFifoBypass(i2eBordStrPtr pB)
while ( --bailout && notClogged &&
(NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS))))
{
- WRITE_LOCK_IRQSAVE(&pCh->Cbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Cbuf_spinlock, flags);
stripIndex = pCh->Cbuf_strip;
// as long as there are packets for this channel...
@@ -1906,7 +1910,7 @@ i2StuffFifoBypass(i2eBordStrPtr pB)
while (stripIndex != pCh->Cbuf_stuff) {
pRemove = &(pCh->Cbuf[stripIndex]);
packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader);
- paddedSize = ROUNDUP(packetSize);
+ paddedSize = roundup(packetSize, 2);
if (paddedSize > 0) {
if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) {
@@ -1930,7 +1934,7 @@ WriteDBGBuf("BYPS", pRemove, paddedSize);
// Done with this channel. Move to next, removing this one from
// the queue of channels if we cleaned it out (i.e., didn't get clogged.
pCh->Cbuf_strip = stripIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
} // Either clogged or finished all the work
#ifdef IP2DEBUG_TRACE
@@ -1954,7 +1958,7 @@ static inline void
i2StuffFifoFlow(i2eBordStrPtr pB)
{
i2ChanStrPtr pCh;
- unsigned short paddedSize = ROUNDUP(sizeof(flowIn));
+ unsigned short paddedSize = roundup(sizeof(flowIn), 2);
ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2,
pB->i2eFifoRemains, paddedSize );
@@ -2010,7 +2014,7 @@ i2StuffFifoInline(i2eBordStrPtr pB)
while ( --bailout && notClogged &&
(NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) )
{
- WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Obuf_spinlock, flags);
stripIndex = pCh->Obuf_strip;
ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff );
@@ -2031,7 +2035,7 @@ i2StuffFifoInline(i2eBordStrPtr pB)
packetSize = flowsize + sizeof(i2CmdHeader);
}
flowsize = CREDIT_USAGE(flowsize);
- paddedSize = ROUNDUP(packetSize);
+ paddedSize = roundup(packetSize, 2);
ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize );
@@ -2086,7 +2090,7 @@ WriteDBGBuf("DATA", pRemove, paddedSize);
// Done with this channel. Move to next, removing this one from the
// queue of channels if we cleaned it out (i.e., didn't get clogged.
pCh->Obuf_strip = stripIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
if ( notClogged )
{
@@ -2190,10 +2194,11 @@ i2ServiceBoard ( i2eBordStrPtr pB )
if (inmail & MB_OUT_STRIPPED) {
pB->i2eFifoOutInts++;
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
pB->i2eFifoRemains = pB->i2eFifoSize;
pB->i2eWaitingForEmptyFifo = 0;
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock,
+ flags);
ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains );
diff --git a/drivers/char/ip2/i2os.h b/drivers/char/ip2/i2os.h
deleted file mode 100644
index eff9b542d69..00000000000
--- a/drivers/char/ip2/i2os.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Defines, definitions and includes which are heavily dependent
-* on O/S, host, compiler, etc. This file is tailored for:
-* Linux v2.0.0 and later
-* Gnu gcc c2.7.2
-* 80x86 architecture
-*
-*******************************************************************************/
-
-#ifndef I2OS_H /* To prevent multiple includes */
-#define I2OS_H 1
-
-//-------------------------------------------------
-// Required Includes
-//-------------------------------------------------
-
-#include "ip2types.h"
-#include <asm/io.h> /* For inb, etc */
-
-//------------------------------------
-// Defines for I/O instructions:
-//------------------------------------
-
-#define INB(port) inb(port)
-#define OUTB(port,value) outb((value),(port))
-#define INW(port) inw(port)
-#define OUTW(port,value) outw((value),(port))
-#define OUTSW(port,addr,count) outsw((port),(addr),(((count)+1)/2))
-#define OUTSB(port,addr,count) outsb((port),(addr),(((count)+1))&-2)
-#define INSW(port,addr,count) insw((port),(addr),(((count)+1)/2))
-#define INSB(port,addr,count) insb((port),(addr),(((count)+1))&-2)
-
-//--------------------------------------------
-// Interrupt control
-//--------------------------------------------
-
-#define LOCK_INIT(a) rwlock_init(a)
-
-#define SAVE_AND_DISABLE_INTS(a,b) { \
- /* printk("get_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- spin_lock_irqsave(a,b); \
-}
-
-#define RESTORE_INTS(a,b) { \
- /* printk("rel_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- spin_unlock_irqrestore(a,b); \
-}
-
-#define READ_LOCK_IRQSAVE(a,b) { \
- /* printk("get_read_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- read_lock_irqsave(a,b); \
-}
-
-#define READ_UNLOCK_IRQRESTORE(a,b) { \
- /* printk("rel_read_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- read_unlock_irqrestore(a,b); \
-}
-
-#define WRITE_LOCK_IRQSAVE(a,b) { \
- /* printk("get_write_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- write_lock_irqsave(a,b); \
-}
-
-#define WRITE_UNLOCK_IRQRESTORE(a,b) { \
- /* printk("rel_write_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- write_unlock_irqrestore(a,b); \
-}
-
-
-//------------------------------------------------------------------------------
-// Hardware-delay loop
-//
-// Probably used in only one place (see i2ellis.c) but this helps keep things
-// together. Note we have unwound the IN instructions. On machines with a
-// reasonable cache, the eight instructions (1 byte each) should fit in cache
-// nicely, and on un-cached machines, the code-fetch would tend not to dominate.
-// Note that cx is shifted so that "count" still reflects the total number of
-// iterations assuming no unwinding.
-//------------------------------------------------------------------------------
-
-//#define DELAY1MS(port,count,label)
-
-//------------------------------------------------------------------------------
-// Macros to switch to a new stack, saving stack pointers, and to restore the
-// old stack (Used, for example, in i2lib.c) "heap" is the address of some
-// buffer which will become the new stack (working down from highest address).
-// The two words at the two lowest addresses in this stack are for storing the
-// SS and SP.
-//------------------------------------------------------------------------------
-
-//#define TO_NEW_STACK(heap,size)
-//#define TO_OLD_STACK(heap)
-
-//------------------------------------------------------------------------------
-// Macros to save the original IRQ vectors and masks, and to patch in new ones.
-//------------------------------------------------------------------------------
-
-//#define SAVE_IRQ_MASKS(dest)
-//#define WRITE_IRQ_MASKS(src)
-//#define SAVE_IRQ_VECTOR(value,dest)
-//#define WRITE_IRQ_VECTOR(value,src)
-
-//------------------------------------------------------------------------------
-// Macro to copy data from one far pointer to another.
-//------------------------------------------------------------------------------
-
-#define I2_MOVE_DATA(fpSource,fpDest,count) memmove(fpDest,fpSource,count);
-
-//------------------------------------------------------------------------------
-// Macros to issue eoi's to host interrupt control (IBM AT 8259-style).
-//------------------------------------------------------------------------------
-
-//#define MASTER_EOI
-//#define SLAVE_EOI
-
-#endif /* I2OS_H */
-
-
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index b1d6cad8428..70957acaa96 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -133,8 +133,9 @@
*****************/
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
-static int ip2_read_procmem(char *, char **, off_t, int);
+static const struct file_operations ip2mem_proc_fops;
static int ip2_read_proc(char *, char **, off_t, int, int *, void * );
/********************/
@@ -168,7 +169,7 @@ static int Fip_firmware_size;
static int ip2_open(PTTY, struct file *);
static void ip2_close(PTTY, struct file *);
static int ip2_write(PTTY, const unsigned char *, int);
-static void ip2_putchar(PTTY, unsigned char);
+static int ip2_putchar(PTTY, unsigned char);
static void ip2_flush_chars(PTTY);
static int ip2_write_room(PTTY);
static int ip2_chars_in_buf(PTTY);
@@ -354,14 +355,15 @@ have_requested_irq( char irq )
/* the driver initialisation function and returns what it returns. */
/******************************************************************************/
#ifdef MODULE
-int
-init_module(void)
+static int __init
+ip2_init_module(void)
{
#ifdef IP2DEBUG_INIT
printk (KERN_DEBUG "Loading module ...\n" );
#endif
return 0;
}
+module_init(ip2_init_module);
#endif /* MODULE */
/******************************************************************************/
@@ -380,8 +382,8 @@ init_module(void)
/* driver should be returned since it may be unloaded from memory. */
/******************************************************************************/
#ifdef MODULE
-void
-cleanup_module(void)
+void __exit
+ip2_cleanup_module(void)
{
int err;
int i;
@@ -423,7 +425,7 @@ cleanup_module(void)
}
put_tty_driver(ip2_tty_driver);
unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
- remove_proc_entry("ip2mem", &proc_root);
+ remove_proc_entry("ip2mem", NULL);
// free memory
for (i = 0; i < IP2_MAX_BOARDS; i++) {
@@ -451,6 +453,7 @@ cleanup_module(void)
printk (KERN_DEBUG "IP2 Unloaded\n" );
#endif
}
+module_exit(ip2_cleanup_module);
#endif /* MODULE */
static const struct tty_operations ip2_ops = {
@@ -695,7 +698,7 @@ ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize)
}
}
/* Register the read_procmem thing */
- if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) {
+ if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) {
printk(KERN_ERR "IP2: failed to register read_procmem\n");
} else {
@@ -1049,9 +1052,9 @@ set_irq( int boardnum, int boardIrq )
* Write to FIFO; don't bother to adjust fifo capacity for this, since
* board will respond almost immediately after SendMail hit.
*/
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
iiWriteBuf(pB, tempCommand, 4);
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
pB->i2eUsingIrq = boardIrq;
pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
@@ -1069,9 +1072,9 @@ set_irq( int boardnum, int boardIrq )
(CMD_OF(tempCommand))[4] = 64; // chars
(CMD_OF(tempCommand))[5] = 87; // HW_TEST
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
iiWriteBuf(pB, tempCommand, 8);
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
CHANNEL_OF(tempCommand) = 0;
PTYPE_OF(tempCommand) = PTYPE_BYPASS;
@@ -1086,9 +1089,9 @@ set_irq( int boardnum, int boardIrq )
CMD_COUNT_OF(tempCommand) = 2;
(CMD_OF(tempCommand))[0] = 44; /* get ping */
(CMD_OF(tempCommand))[1] = 200; /* 200 ms */
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
iiWriteBuf(pB, tempCommand, 4);
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
#endif
iiEnableMailIrq(pB);
@@ -1267,12 +1270,12 @@ static void do_input(struct work_struct *work)
// Data input
if ( pCh->pTTY != NULL ) {
- READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
+ read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
i2Input( pCh );
} else
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
} else {
ip2trace(CHANN, ITRC_INPUT, 22, 0 );
@@ -1613,10 +1616,8 @@ ip2_close( PTTY tty, struct file *pFile )
serviceOutgoingFifo ( pCh->pMyBord );
- if ( tty->driver->flush_buffer )
- tty->driver->flush_buffer(tty);
- if ( tty->ldisc.flush_buffer )
- tty->ldisc.flush_buffer(tty);
+ tty_ldisc_flush(tty);
+ tty_driver_flush_buffer(tty);
tty->closing = 0;
pCh->pTTY = NULL;
@@ -1716,9 +1717,9 @@ ip2_write( PTTY tty, const unsigned char *pData, int count)
ip2_flush_chars( tty );
/* This is the actual move bit. Make sure it does what we need!!!!! */
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
bytesSent = i2Output( pCh, pData, count);
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
@@ -1735,7 +1736,7 @@ ip2_write( PTTY tty, const unsigned char *pData, int count)
/* */
/* */
/******************************************************************************/
-static void
+static int
ip2_putchar( PTTY tty, unsigned char ch )
{
i2ChanStrPtr pCh = tty->driver_data;
@@ -1743,13 +1744,14 @@ ip2_putchar( PTTY tty, unsigned char ch )
// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
ip2_flush_chars( tty );
} else
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
+ return 1;
// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
}
@@ -1769,7 +1771,7 @@ ip2_flush_chars( PTTY tty )
i2ChanStrPtr pCh = tty->driver_data;
unsigned long flags;
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
if ( pCh->Pbuf_stuff ) {
// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
@@ -1783,7 +1785,7 @@ ip2_flush_chars( PTTY tty )
}
pCh->Pbuf_stuff -= strip;
}
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
}
/******************************************************************************/
@@ -1801,9 +1803,9 @@ ip2_write_room ( PTTY tty )
i2ChanStrPtr pCh = tty->driver_data;
unsigned long flags;
- READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
- READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
@@ -1833,12 +1835,12 @@ ip2_chars_in_buf ( PTTY tty )
pCh->Obuf_char_count + pCh->Pbuf_stuff,
pCh->Obuf_char_count, pCh->Pbuf_stuff );
#endif
- READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Obuf_spinlock, flags);
rc = pCh->Obuf_char_count;
- READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
- READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
+ read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
rc += pCh->Pbuf_stuff;
- READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
return rc;
}
@@ -1862,9 +1864,9 @@ ip2_flush_buffer( PTTY tty )
#ifdef IP2DEBUG_WRITE
printk (KERN_DEBUG "IP2: flush buffer\n" );
#endif
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
pCh->Pbuf_stuff = 0;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
i2FlushOutput( pCh );
ip2_owake(tty);
@@ -1950,15 +1952,15 @@ ip2_unthrottle ( PTTY tty )
pCh->throttled = 0;
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
serviceOutgoingFifo( pCh->pMyBord );
- READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
+ read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
#ifdef IP2DEBUG_READ
printk (KERN_DEBUG "i2Input called from unthrottle\n" );
#endif
i2Input( pCh );
} else
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
}
static void
@@ -2201,9 +2203,9 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
* for masking). Caller should use TIOCGICOUNT to see which one it was
*/
case TIOCMIWAIT:
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cprev = pCh->icount; /* note the counters on entry */
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4,
CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
init_waitqueue_entry(&wait, current);
@@ -2223,9 +2225,9 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
rc = -ERESTARTSYS;
break;
}
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount; /* atomic copy */
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
rc = -EIO; /* no change => rc */
@@ -2263,9 +2265,9 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
case TIOCGICOUNT:
ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount;
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
p_cuser = argp;
rc = put_user(cnow.cts, &p_cuser->cts);
rc = put_user(cnow.dsr, &p_cuser->dsr);
@@ -2871,7 +2873,7 @@ ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
case 65: /* Board - ip2stat */
if ( pB ) {
rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
- rc = put_user(INB(pB->i2eStatus),
+ rc = put_user(inb(pB->i2eStatus),
(ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
} else {
rc = -ENODEV;
@@ -2967,65 +2969,61 @@ ip2_ipl_open( struct inode *pInode, struct file *pFile )
}
return 0;
}
-/******************************************************************************/
-/* Function: ip2_read_procmem */
-/* Parameters: */
-/* */
-/* Returns: Length of output */
-/* */
-/* Description: */
-/* Supplies some driver operating parameters */
-/* Not real useful unless your debugging the fifo */
-/* */
-/******************************************************************************/
-
-#define LIMIT (PAGE_SIZE - 120)
static int
-ip2_read_procmem(char *buf, char **start, off_t offset, int len)
+proc_ip2mem_show(struct seq_file *m, void *v)
{
i2eBordStrPtr pB;
i2ChanStrPtr pCh;
PTTY tty;
int i;
- len = 0;
-
#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n"
#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n"
#define FMTLIN3 " 0x%04x 0x%04x rc flow\n"
- len += sprintf(buf+len,"\n");
+ seq_printf(m,"\n");
for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
pB = i2BoardPtrTable[i];
if ( pB ) {
- len += sprintf(buf+len,"board %d:\n",i);
- len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n",
+ seq_printf(m,"board %d:\n",i);
+ seq_printf(m,"\tFifo rem: %d mty: %x outM %x\n",
pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting);
}
}
- len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n");
+ seq_printf(m,"#: tty flags, port flags, cflags, iflags\n");
for (i=0; i < IP2_MAX_PORTS; i++) {
- if (len > LIMIT)
- break;
pCh = DevTable[i];
if (pCh) {
tty = pCh->pTTY;
if (tty && tty->count) {
- len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags,
+ seq_printf(m,FMTLINE,i,(int)tty->flags,pCh->flags,
tty->termios->c_cflag,tty->termios->c_iflag);
- len += sprintf(buf+len,FMTLIN2,
+ seq_printf(m,FMTLIN2,
pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds);
- len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room);
+ seq_printf(m,FMTLIN3,pCh->infl.asof,pCh->infl.room);
}
}
}
- return len;
+ return 0;
+}
+
+static int proc_ip2mem_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, proc_ip2mem_show, NULL);
}
+static const struct file_operations ip2mem_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = proc_ip2mem_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* This is the handler for /proc/tty/driver/ip2
*
diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
index 553f0a408ed..eb8a1a8c188 100644
--- a/drivers/char/ipmi/Makefile
+++ b/drivers/char/ipmi/Makefile
@@ -9,7 +9,3 @@ obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
obj-$(CONFIG_IPMI_SI) += ipmi_si.o
obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o
obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o
-
-ipmi_si.o: $(ipmi_si-objs)
- $(LD) -r -o $@ $(ipmi_si-objs)
-
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index e736119b649..7b98c067190 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -37,26 +37,32 @@
#define BT_DEBUG_ENABLE 1 /* Generic messages */
#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */
#define BT_DEBUG_STATES 4 /* Verbose look at state changes */
-/* BT_DEBUG_OFF must be zero to correspond to the default uninitialized
- value */
+/*
+ * BT_DEBUG_OFF must be zero to correspond to the default uninitialized
+ * value
+ */
static int bt_debug; /* 0 == BT_DEBUG_OFF */
module_param(bt_debug, int, 0644);
MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
-/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
- and 64 byte buffers. However, one HP implementation wants 255 bytes of
- buffer (with a documented message of 160 bytes) so go for the max.
- Since the Open IPMI architecture is single-message oriented at this
- stage, the queue depth of BT is of no concern. */
+/*
+ * Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
+ * and 64 byte buffers. However, one HP implementation wants 255 bytes of
+ * buffer (with a documented message of 160 bytes) so go for the max.
+ * Since the Open IPMI architecture is single-message oriented at this
+ * stage, the queue depth of BT is of no concern.
+ */
#define BT_NORMAL_TIMEOUT 5 /* seconds */
#define BT_NORMAL_RETRY_LIMIT 2
#define BT_RESET_DELAY 6 /* seconds after warm reset */
-/* States are written in chronological order and usually cover
- multiple rows of the state table discussion in the IPMI spec. */
+/*
+ * States are written in chronological order and usually cover
+ * multiple rows of the state table discussion in the IPMI spec.
+ */
enum bt_states {
BT_STATE_IDLE = 0, /* Order is critical in this list */
@@ -76,10 +82,12 @@ enum bt_states {
BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */
};
-/* Macros seen at the end of state "case" blocks. They help with legibility
- and debugging. */
+/*
+ * Macros seen at the end of state "case" blocks. They help with legibility
+ * and debugging.
+ */
-#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; }
+#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; }
#define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; }
@@ -110,11 +118,13 @@ struct si_sm_data {
#define BT_H_BUSY 0x40
#define BT_B_BUSY 0x80
-/* Some bits are toggled on each write: write once to set it, once
- more to clear it; writing a zero does nothing. To absolutely
- clear it, check its state and write if set. This avoids the "get
- current then use as mask" scheme to modify one bit. Note that the
- variable "bt" is hardcoded into these macros. */
+/*
+ * Some bits are toggled on each write: write once to set it, once
+ * more to clear it; writing a zero does nothing. To absolutely
+ * clear it, check its state and write if set. This avoids the "get
+ * current then use as mask" scheme to modify one bit. Note that the
+ * variable "bt" is hardcoded into these macros.
+ */
#define BT_STATUS bt->io->inputb(bt->io, 0)
#define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x)
@@ -125,8 +135,10 @@ struct si_sm_data {
#define BT_INTMASK_R bt->io->inputb(bt->io, 2)
#define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x)
-/* Convenience routines for debugging. These are not multi-open safe!
- Note the macros have hardcoded variables in them. */
+/*
+ * Convenience routines for debugging. These are not multi-open safe!
+ * Note the macros have hardcoded variables in them.
+ */
static char *state2txt(unsigned char state)
{
@@ -182,7 +194,8 @@ static char *status2txt(unsigned char status)
static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io)
{
memset(bt, 0, sizeof(struct si_sm_data));
- if (bt->io != io) { /* external: one-time only things */
+ if (bt->io != io) {
+ /* external: one-time only things */
bt->io = io;
bt->seq = 0;
}
@@ -229,7 +242,7 @@ static int bt_start_transaction(struct si_sm_data *bt,
printk(KERN_WARNING "BT: +++++++++++++++++ New command\n");
printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2);
for (i = 0; i < size; i ++)
- printk (" %02x", data[i]);
+ printk(" %02x", data[i]);
printk("\n");
}
bt->write_data[0] = size + 1; /* all data plus seq byte */
@@ -246,8 +259,10 @@ static int bt_start_transaction(struct si_sm_data *bt,
return 0;
}
-/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
- it calls this. Strip out the length and seq bytes. */
+/*
+ * After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
+ * it calls this. Strip out the length and seq bytes.
+ */
static int bt_get_result(struct si_sm_data *bt,
unsigned char *data,
@@ -269,10 +284,10 @@ static int bt_get_result(struct si_sm_data *bt,
memcpy(data + 2, bt->read_data + 4, msg_len - 2);
if (bt_debug & BT_DEBUG_MSG) {
- printk (KERN_WARNING "BT: result %d bytes:", msg_len);
+ printk(KERN_WARNING "BT: result %d bytes:", msg_len);
for (i = 0; i < msg_len; i++)
printk(" %02x", data[i]);
- printk ("\n");
+ printk("\n");
}
return msg_len;
}
@@ -292,8 +307,10 @@ static void reset_flags(struct si_sm_data *bt)
BT_INTMASK_W(BT_BMC_HWRST);
}
-/* Get rid of an unwanted/stale response. This should only be needed for
- BMCs that support multiple outstanding requests. */
+/*
+ * Get rid of an unwanted/stale response. This should only be needed for
+ * BMCs that support multiple outstanding requests.
+ */
static void drain_BMC2HOST(struct si_sm_data *bt)
{
@@ -326,8 +343,8 @@ static inline void write_all_bytes(struct si_sm_data *bt)
printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
bt->write_count, bt->seq);
for (i = 0; i < bt->write_count; i++)
- printk (" %02x", bt->write_data[i]);
- printk ("\n");
+ printk(" %02x", bt->write_data[i]);
+ printk("\n");
}
for (i = 0; i < bt->write_count; i++)
HOST2BMC(bt->write_data[i]);
@@ -337,8 +354,10 @@ static inline int read_all_bytes(struct si_sm_data *bt)
{
unsigned char i;
- /* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
- Keep layout of first four bytes aligned with write_data[] */
+ /*
+ * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
+ * Keep layout of first four bytes aligned with write_data[]
+ */
bt->read_data[0] = BMC2HOST;
bt->read_count = bt->read_data[0];
@@ -362,8 +381,8 @@ static inline int read_all_bytes(struct si_sm_data *bt)
if (max > 16)
max = 16;
for (i = 0; i < max; i++)
- printk (" %02x", bt->read_data[i]);
- printk ("%s\n", bt->read_count == max ? "" : " ...");
+ printk(KERN_CONT " %02x", bt->read_data[i]);
+ printk(KERN_CONT "%s\n", bt->read_count == max ? "" : " ...");
}
/* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */
@@ -402,8 +421,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */
reason, STATE2TXT, STATUS2TXT);
- /* Per the IPMI spec, retries are based on the sequence number
- known only to this module, so manage a restart here. */
+ /*
+ * Per the IPMI spec, retries are based on the sequence number
+ * known only to this module, so manage a restart here.
+ */
(bt->error_retries)++;
if (bt->error_retries < bt->BT_CAP_retries) {
printk("%d retries left\n",
@@ -412,8 +433,8 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
return SI_SM_CALL_WITHOUT_DELAY;
}
- printk("failed %d retries, sending error response\n",
- bt->BT_CAP_retries);
+ printk(KERN_WARNING "failed %d retries, sending error response\n",
+ bt->BT_CAP_retries);
if (!bt->nonzero_status)
printk(KERN_ERR "IPMI BT: stuck, try power cycle\n");
@@ -424,8 +445,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
return SI_SM_CALL_WITHOUT_DELAY;
}
- /* Concoct a useful error message, set up the next state, and
- be done with this sequence. */
+ /*
+ * Concoct a useful error message, set up the next state, and
+ * be done with this sequence.
+ */
bt->state = BT_STATE_IDLE;
switch (cCode) {
@@ -461,10 +484,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
last_printed = bt->state;
}
- /* Commands that time out may still (eventually) provide a response.
- This stale response will get in the way of a new response so remove
- it if possible (hopefully during IDLE). Even if it comes up later
- it will be rejected by its (now-forgotten) seq number. */
+ /*
+ * Commands that time out may still (eventually) provide a response.
+ * This stale response will get in the way of a new response so remove
+ * it if possible (hopefully during IDLE). Even if it comes up later
+ * it will be rejected by its (now-forgotten) seq number.
+ */
if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) {
drain_BMC2HOST(bt);
@@ -472,7 +497,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
}
if ((bt->state != BT_STATE_IDLE) &&
- (bt->state < BT_STATE_PRINTME)) { /* check timeout */
+ (bt->state < BT_STATE_PRINTME)) {
+ /* check timeout */
bt->timeout -= time;
if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1))
return error_recovery(bt,
@@ -482,8 +508,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
switch (bt->state) {
- /* Idle state first checks for asynchronous messages from another
- channel, then does some opportunistic housekeeping. */
+ /*
+ * Idle state first checks for asynchronous messages from another
+ * channel, then does some opportunistic housekeeping.
+ */
case BT_STATE_IDLE:
if (status & BT_SMS_ATN) {
@@ -531,16 +559,19 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
BT_CONTROL(BT_H_BUSY); /* set */
- /* Uncached, ordered writes should just proceeed serially but
- some BMCs don't clear B2H_ATN with one hit. Fast-path a
- workaround without too much penalty to the general case. */
+ /*
+ * Uncached, ordered writes should just proceeed serially but
+ * some BMCs don't clear B2H_ATN with one hit. Fast-path a
+ * workaround without too much penalty to the general case.
+ */
BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */
BT_STATE_CHANGE(BT_STATE_CLEAR_B2H,
SI_SM_CALL_WITHOUT_DELAY);
case BT_STATE_CLEAR_B2H:
- if (status & BT_B2H_ATN) { /* keep hitting it */
+ if (status & BT_B2H_ATN) {
+ /* keep hitting it */
BT_CONTROL(BT_B2H_ATN);
BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
}
@@ -548,7 +579,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
SI_SM_CALL_WITHOUT_DELAY);
case BT_STATE_READ_BYTES:
- if (!(status & BT_H_BUSY)) /* check in case of retry */
+ if (!(status & BT_H_BUSY))
+ /* check in case of retry */
BT_CONTROL(BT_H_BUSY);
BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */
i = read_all_bytes(bt); /* true == packet seq match */
@@ -599,8 +631,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
BT_STATE_CHANGE(BT_STATE_XACTION_START,
SI_SM_CALL_WITH_DELAY);
- /* Get BT Capabilities, using timing of upper level state machine.
- Set outreqs to prevent infinite loop on timeout. */
+ /*
+ * Get BT Capabilities, using timing of upper level state machine.
+ * Set outreqs to prevent infinite loop on timeout.
+ */
case BT_STATE_CAPABILITIES_BEGIN:
bt->BT_CAP_outreqs = 1;
{
@@ -638,10 +672,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
static int bt_detect(struct si_sm_data *bt)
{
- /* It's impossible for the BT status and interrupt registers to be
- all 1's, (assuming a properly functioning, self-initialized BMC)
- but that's what you get from reading a bogus address, so we
- test that first. The calling routine uses negative logic. */
+ /*
+ * It's impossible for the BT status and interrupt registers to be
+ * all 1's, (assuming a properly functioning, self-initialized BMC)
+ * but that's what you get from reading a bogus address, so we
+ * test that first. The calling routine uses negative logic.
+ */
if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF))
return 1;
@@ -658,8 +694,7 @@ static int bt_size(void)
return sizeof(struct si_sm_data);
}
-struct si_sm_handlers bt_smi_handlers =
-{
+struct si_sm_handlers bt_smi_handlers = {
.init_data = bt_init_data,
.start_transaction = bt_start_transaction,
.get_result = bt_get_result,
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index c1b8228cb7b..80704875794 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -60,37 +60,58 @@ MODULE_PARM_DESC(kcs_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
/* The states the KCS driver may be in. */
enum kcs_states {
- KCS_IDLE, /* The KCS interface is currently
- doing nothing. */
- KCS_START_OP, /* We are starting an operation. The
- data is in the output buffer, but
- nothing has been done to the
- interface yet. This was added to
- the state machine in the spec to
- wait for the initial IBF. */
- KCS_WAIT_WRITE_START, /* We have written a write cmd to the
- interface. */
- KCS_WAIT_WRITE, /* We are writing bytes to the
- interface. */
- KCS_WAIT_WRITE_END, /* We have written the write end cmd
- to the interface, and still need to
- write the last byte. */
- KCS_WAIT_READ, /* We are waiting to read data from
- the interface. */
- KCS_ERROR0, /* State to transition to the error
- handler, this was added to the
- state machine in the spec to be
- sure IBF was there. */
- KCS_ERROR1, /* First stage error handler, wait for
- the interface to respond. */
- KCS_ERROR2, /* The abort cmd has been written,
- wait for the interface to
- respond. */
- KCS_ERROR3, /* We wrote some data to the
- interface, wait for it to switch to
- read mode. */
- KCS_HOSED /* The hardware failed to follow the
- state machine. */
+ /* The KCS interface is currently doing nothing. */
+ KCS_IDLE,
+
+ /*
+ * We are starting an operation. The data is in the output
+ * buffer, but nothing has been done to the interface yet. This
+ * was added to the state machine in the spec to wait for the
+ * initial IBF.
+ */
+ KCS_START_OP,
+
+ /* We have written a write cmd to the interface. */
+ KCS_WAIT_WRITE_START,
+
+ /* We are writing bytes to the interface. */
+ KCS_WAIT_WRITE,
+
+ /*
+ * We have written the write end cmd to the interface, and
+ * still need to write the last byte.
+ */
+ KCS_WAIT_WRITE_END,
+
+ /* We are waiting to read data from the interface. */
+ KCS_WAIT_READ,
+
+ /*
+ * State to transition to the error handler, this was added to
+ * the state machine in the spec to be sure IBF was there.
+ */
+ KCS_ERROR0,
+
+ /*
+ * First stage error handler, wait for the interface to
+ * respond.
+ */
+ KCS_ERROR1,
+
+ /*
+ * The abort cmd has been written, wait for the interface to
+ * respond.
+ */
+ KCS_ERROR2,
+
+ /*
+ * We wrote some data to the interface, wait for it to switch
+ * to read mode.
+ */
+ KCS_ERROR3,
+
+ /* The hardware failed to follow the state machine. */
+ KCS_HOSED
};
#define MAX_KCS_READ_SIZE IPMI_MAX_MSG_LENGTH
@@ -102,8 +123,7 @@ enum kcs_states {
#define MAX_ERROR_RETRIES 10
#define ERROR0_OBF_WAIT_JIFFIES (2*HZ)
-struct si_sm_data
-{
+struct si_sm_data {
enum kcs_states state;
struct si_sm_io *io;
unsigned char write_data[MAX_KCS_WRITE_SIZE];
@@ -187,7 +207,8 @@ static inline void start_error_recovery(struct si_sm_data *kcs, char *reason)
(kcs->error_retries)++;
if (kcs->error_retries > MAX_ERROR_RETRIES) {
if (kcs_debug & KCS_DEBUG_ENABLE)
- printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", reason);
+ printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n",
+ reason);
kcs->state = KCS_HOSED;
} else {
kcs->error0_timeout = jiffies + ERROR0_OBF_WAIT_JIFFIES;
@@ -271,10 +292,9 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data,
if (kcs_debug & KCS_DEBUG_MSG) {
printk(KERN_DEBUG "start_kcs_transaction -");
- for (i = 0; i < size; i ++) {
+ for (i = 0; i < size; i++)
printk(" %02x", (unsigned char) (data [i]));
- }
- printk ("\n");
+ printk("\n");
}
kcs->error_retries = 0;
memcpy(kcs->write_data, data, size);
@@ -305,9 +325,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data,
kcs->read_pos = 3;
}
if (kcs->truncated) {
- /* Report a truncated error. We might overwrite
- another error, but that's too bad, the user needs
- to know it was truncated. */
+ /*
+ * Report a truncated error. We might overwrite
+ * another error, but that's too bad, the user needs
+ * to know it was truncated.
+ */
data[2] = IPMI_ERR_MSG_TRUNCATED;
kcs->truncated = 0;
}
@@ -315,9 +337,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data,
return kcs->read_pos;
}
-/* This implements the state machine defined in the IPMI manual, see
- that for details on how this works. Divide that flowchart into
- sections delimited by "Wait for IBF" and this will become clear. */
+/*
+ * This implements the state machine defined in the IPMI manual, see
+ * that for details on how this works. Divide that flowchart into
+ * sections delimited by "Wait for IBF" and this will become clear.
+ */
static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
{
unsigned char status;
@@ -388,11 +412,12 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
write_next_byte(kcs);
}
break;
-
+
case KCS_WAIT_WRITE_END:
if (state != KCS_WRITE_STATE) {
start_error_recovery(kcs,
- "Not in write state for write end");
+ "Not in write state"
+ " for write end");
break;
}
clear_obf(kcs, status);
@@ -413,13 +438,15 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
return SI_SM_CALL_WITH_DELAY;
read_next_byte(kcs);
} else {
- /* We don't implement this exactly like the state
- machine in the spec. Some broken hardware
- does not write the final dummy byte to the
- read register. Thus obf will never go high
- here. We just go straight to idle, and we
- handle clearing out obf in idle state if it
- happens to come in. */
+ /*
+ * We don't implement this exactly like the state
+ * machine in the spec. Some broken hardware
+ * does not write the final dummy byte to the
+ * read register. Thus obf will never go high
+ * here. We just go straight to idle, and we
+ * handle clearing out obf in idle state if it
+ * happens to come in.
+ */
clear_obf(kcs, status);
kcs->orig_write_count = 0;
kcs->state = KCS_IDLE;
@@ -430,7 +457,8 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
case KCS_ERROR0:
clear_obf(kcs, status);
status = read_status(kcs);
- if (GET_STATUS_OBF(status)) /* controller isn't responding */
+ if (GET_STATUS_OBF(status))
+ /* controller isn't responding */
if (time_before(jiffies, kcs->error0_timeout))
return SI_SM_CALL_WITH_TICK_DELAY;
write_cmd(kcs, KCS_GET_STATUS_ABORT);
@@ -442,7 +470,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
write_data(kcs, 0);
kcs->state = KCS_ERROR2;
break;
-
+
case KCS_ERROR2:
if (state != KCS_READ_STATE) {
start_error_recovery(kcs,
@@ -456,7 +484,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
write_data(kcs, KCS_READ_BYTE);
kcs->state = KCS_ERROR3;
break;
-
+
case KCS_ERROR3:
if (state != KCS_IDLE_STATE) {
start_error_recovery(kcs,
@@ -475,7 +503,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
return SI_SM_TRANSACTION_COMPLETE;
}
break;
-
+
case KCS_HOSED:
break;
}
@@ -495,10 +523,12 @@ static int kcs_size(void)
static int kcs_detect(struct si_sm_data *kcs)
{
- /* It's impossible for the KCS status register to be all 1's,
- (assuming a properly functioning, self-initialized BMC)
- but that's what you get from reading a bogus address, so we
- test that first. */
+ /*
+ * It's impossible for the KCS status register to be all 1's,
+ * (assuming a properly functioning, self-initialized BMC)
+ * but that's what you get from reading a bogus address, so we
+ * test that first.
+ */
if (read_status(kcs) == 0xff)
return 1;
@@ -509,8 +539,7 @@ static void kcs_cleanup(struct si_sm_data *kcs)
{
}
-struct si_sm_handlers kcs_smi_handlers =
-{
+struct si_sm_handlers kcs_smi_handlers = {
.init_data = init_kcs_data,
.start_transaction = start_kcs_transaction,
.get_result = get_kcs_result,
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 32b2b22996d..8a59aaa21be 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -47,7 +47,7 @@
#define PFX "IPMI message handler: "
-#define IPMI_DRIVER_VERSION "39.1"
+#define IPMI_DRIVER_VERSION "39.2"
static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
static int ipmi_init_msghandler(void);
@@ -63,16 +63,16 @@ static struct proc_dir_entry *proc_ipmi_root;
#define MAX_EVENTS_IN_QUEUE 25
-/* Don't let a message sit in a queue forever, always time it with at lest
- the max message timer. This is in milliseconds. */
+/*
+ * Don't let a message sit in a queue forever, always time it with at lest
+ * the max message timer. This is in milliseconds.
+ */
#define MAX_MSG_TIMEOUT 60000
-
/*
* The main "user" data structure.
*/
-struct ipmi_user
-{
+struct ipmi_user {
struct list_head link;
/* Set to "0" when the user is destroyed. */
@@ -91,8 +91,7 @@ struct ipmi_user
int gets_events;
};
-struct cmd_rcvr
-{
+struct cmd_rcvr {
struct list_head link;
ipmi_user_t user;
@@ -106,12 +105,12 @@ struct cmd_rcvr
* or change any data until the RCU period completes. So we
* use this next variable during mass deletion so we can have
* a list and don't have to wait and restart the search on
- * every individual deletion of a command. */
+ * every individual deletion of a command.
+ */
struct cmd_rcvr *next;
};
-struct seq_table
-{
+struct seq_table {
unsigned int inuse : 1;
unsigned int broadcast : 1;
@@ -119,53 +118,60 @@ struct seq_table
unsigned long orig_timeout;
unsigned int retries_left;
- /* To verify on an incoming send message response that this is
- the message that the response is for, we keep a sequence id
- and increment it every time we send a message. */
+ /*
+ * To verify on an incoming send message response that this is
+ * the message that the response is for, we keep a sequence id
+ * and increment it every time we send a message.
+ */
long seqid;
- /* This is held so we can properly respond to the message on a
- timeout, and it is used to hold the temporary data for
- retransmission, too. */
+ /*
+ * This is held so we can properly respond to the message on a
+ * timeout, and it is used to hold the temporary data for
+ * retransmission, too.
+ */
struct ipmi_recv_msg *recv_msg;
};
-/* Store the information in a msgid (long) to allow us to find a
- sequence table entry from the msgid. */
+/*
+ * Store the information in a msgid (long) to allow us to find a
+ * sequence table entry from the msgid.
+ */
#define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff))
#define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \
do { \
seq = ((msgid >> 26) & 0x3f); \
seqid = (msgid & 0x3fffff); \
- } while (0)
+ } while (0)
#define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff)
-struct ipmi_channel
-{
+struct ipmi_channel {
unsigned char medium;
unsigned char protocol;
- /* My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR,
- but may be changed by the user. */
+ /*
+ * My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR,
+ * but may be changed by the user.
+ */
unsigned char address;
- /* My LUN. This should generally stay the SMS LUN, but just in
- case... */
+ /*
+ * My LUN. This should generally stay the SMS LUN, but just in
+ * case...
+ */
unsigned char lun;
};
#ifdef CONFIG_PROC_FS
-struct ipmi_proc_entry
-{
+struct ipmi_proc_entry {
char *name;
struct ipmi_proc_entry *next;
};
#endif
-struct bmc_device
-{
+struct bmc_device {
struct platform_device *dev;
struct ipmi_device_id id;
unsigned char guid[16];
@@ -186,10 +192,108 @@ struct bmc_device
struct device_attribute aux_firmware_rev_attr;
};
+/*
+ * Various statistics for IPMI, these index stats[] in the ipmi_smi
+ * structure.
+ */
+enum ipmi_stat_indexes {
+ /* Commands we got from the user that were invalid. */
+ IPMI_STAT_sent_invalid_commands = 0,
+
+ /* Commands we sent to the MC. */
+ IPMI_STAT_sent_local_commands,
+
+ /* Responses from the MC that were delivered to a user. */
+ IPMI_STAT_handled_local_responses,
+
+ /* Responses from the MC that were not delivered to a user. */
+ IPMI_STAT_unhandled_local_responses,
+
+ /* Commands we sent out to the IPMB bus. */
+ IPMI_STAT_sent_ipmb_commands,
+
+ /* Commands sent on the IPMB that had errors on the SEND CMD */
+ IPMI_STAT_sent_ipmb_command_errs,
+
+ /* Each retransmit increments this count. */
+ IPMI_STAT_retransmitted_ipmb_commands,
+
+ /*
+ * When a message times out (runs out of retransmits) this is
+ * incremented.
+ */
+ IPMI_STAT_timed_out_ipmb_commands,
+
+ /*
+ * This is like above, but for broadcasts. Broadcasts are
+ * *not* included in the above count (they are expected to
+ * time out).
+ */
+ IPMI_STAT_timed_out_ipmb_broadcasts,
+
+ /* Responses I have sent to the IPMB bus. */
+ IPMI_STAT_sent_ipmb_responses,
+
+ /* The response was delivered to the user. */
+ IPMI_STAT_handled_ipmb_responses,
+
+ /* The response had invalid data in it. */
+ IPMI_STAT_invalid_ipmb_responses,
+
+ /* The response didn't have anyone waiting for it. */
+ IPMI_STAT_unhandled_ipmb_responses,
+
+ /* Commands we sent out to the IPMB bus. */
+ IPMI_STAT_sent_lan_commands,
+
+ /* Commands sent on the IPMB that had errors on the SEND CMD */
+ IPMI_STAT_sent_lan_command_errs,
+
+ /* Each retransmit increments this count. */
+ IPMI_STAT_retransmitted_lan_commands,
+
+ /*
+ * When a message times out (runs out of retransmits) this is
+ * incremented.
+ */
+ IPMI_STAT_timed_out_lan_commands,
+
+ /* Responses I have sent to the IPMB bus. */
+ IPMI_STAT_sent_lan_responses,
+
+ /* The response was delivered to the user. */
+ IPMI_STAT_handled_lan_responses,
+
+ /* The response had invalid data in it. */
+ IPMI_STAT_invalid_lan_responses,
+
+ /* The response didn't have anyone waiting for it. */
+ IPMI_STAT_unhandled_lan_responses,
+
+ /* The command was delivered to the user. */
+ IPMI_STAT_handled_commands,
+
+ /* The command had invalid data in it. */
+ IPMI_STAT_invalid_commands,
+
+ /* The command didn't have anyone waiting for it. */
+ IPMI_STAT_unhandled_commands,
+
+ /* Invalid data in an event. */
+ IPMI_STAT_invalid_events,
+
+ /* Events that were received with the proper format. */
+ IPMI_STAT_events,
+
+
+ /* This *must* remain last, add new values above this. */
+ IPMI_NUM_STATS
+};
+
+
#define IPMI_IPMB_NUM_SEQ 64
#define IPMI_MAX_CHANNELS 16
-struct ipmi_smi
-{
+struct ipmi_smi {
/* What interface number are we? */
int intf_num;
@@ -198,8 +302,10 @@ struct ipmi_smi
/* Used for a list of interfaces. */
struct list_head link;
- /* The list of upper layers that are using me. seq_lock
- * protects this. */
+ /*
+ * The list of upper layers that are using me. seq_lock
+ * protects this.
+ */
struct list_head users;
/* Information to supply to users. */
@@ -213,10 +319,12 @@ struct ipmi_smi
char *my_dev_name;
char *sysfs_name;
- /* This is the lower-layer's sender routine. Note that you
+ /*
+ * This is the lower-layer's sender routine. Note that you
* must either be holding the ipmi_interfaces_mutex or be in
* an umpreemptible region to use this. You must fetch the
- * value into a local variable and make sure it is not NULL. */
+ * value into a local variable and make sure it is not NULL.
+ */
struct ipmi_smi_handlers *handlers;
void *send_info;
@@ -229,34 +337,45 @@ struct ipmi_smi
/* Driver-model device for the system interface. */
struct device *si_dev;
- /* A table of sequence numbers for this interface. We use the
- sequence numbers for IPMB messages that go out of the
- interface to match them up with their responses. A routine
- is called periodically to time the items in this list. */
+ /*
+ * A table of sequence numbers for this interface. We use the
+ * sequence numbers for IPMB messages that go out of the
+ * interface to match them up with their responses. A routine
+ * is called periodically to time the items in this list.
+ */
spinlock_t seq_lock;
struct seq_table seq_table[IPMI_IPMB_NUM_SEQ];
int curr_seq;
- /* Messages that were delayed for some reason (out of memory,
- for instance), will go in here to be processed later in a
- periodic timer interrupt. */
+ /*
+ * Messages that were delayed for some reason (out of memory,
+ * for instance), will go in here to be processed later in a
+ * periodic timer interrupt.
+ */
spinlock_t waiting_msgs_lock;
struct list_head waiting_msgs;
- /* The list of command receivers that are registered for commands
- on this interface. */
+ /*
+ * The list of command receivers that are registered for commands
+ * on this interface.
+ */
struct mutex cmd_rcvrs_mutex;
struct list_head cmd_rcvrs;
- /* Events that were queues because no one was there to receive
- them. */
+ /*
+ * Events that were queues because no one was there to receive
+ * them.
+ */
spinlock_t events_lock; /* For dealing with event stuff. */
struct list_head waiting_events;
unsigned int waiting_events_count; /* How many events in queue? */
- int delivering_events;
+ char delivering_events;
+ char event_msg_printed;
- /* The event receiver for my BMC, only really used at panic
- shutdown as a place to store this. */
+ /*
+ * The event receiver for my BMC, only really used at panic
+ * shutdown as a place to store this.
+ */
unsigned char event_receiver;
unsigned char event_receiver_lun;
unsigned char local_sel_device;
@@ -268,14 +387,18 @@ struct ipmi_smi
int auto_maintenance_timeout;
spinlock_t maintenance_mode_lock; /* Used in a timer... */
- /* A cheap hack, if this is non-null and a message to an
- interface comes in with a NULL user, call this routine with
- it. Note that the message will still be freed by the
- caller. This only works on the system interface. */
+ /*
+ * A cheap hack, if this is non-null and a message to an
+ * interface comes in with a NULL user, call this routine with
+ * it. Note that the message will still be freed by the
+ * caller. This only works on the system interface.
+ */
void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg);
- /* When we are scanning the channels for an SMI, this will
- tell which channel we are scanning. */
+ /*
+ * When we are scanning the channels for an SMI, this will
+ * tell which channel we are scanning.
+ */
int curr_channel;
/* Channel information */
@@ -285,74 +408,14 @@ struct ipmi_smi
struct proc_dir_entry *proc_dir;
char proc_dir_name[10];
- spinlock_t counter_lock; /* For making counters atomic. */
-
- /* Commands we got that were invalid. */
- unsigned int sent_invalid_commands;
-
- /* Commands we sent to the MC. */
- unsigned int sent_local_commands;
- /* Responses from the MC that were delivered to a user. */
- unsigned int handled_local_responses;
- /* Responses from the MC that were not delivered to a user. */
- unsigned int unhandled_local_responses;
-
- /* Commands we sent out to the IPMB bus. */
- unsigned int sent_ipmb_commands;
- /* Commands sent on the IPMB that had errors on the SEND CMD */
- unsigned int sent_ipmb_command_errs;
- /* Each retransmit increments this count. */
- unsigned int retransmitted_ipmb_commands;
- /* When a message times out (runs out of retransmits) this is
- incremented. */
- unsigned int timed_out_ipmb_commands;
-
- /* This is like above, but for broadcasts. Broadcasts are
- *not* included in the above count (they are expected to
- time out). */
- unsigned int timed_out_ipmb_broadcasts;
+ atomic_t stats[IPMI_NUM_STATS];
- /* Responses I have sent to the IPMB bus. */
- unsigned int sent_ipmb_responses;
-
- /* The response was delivered to the user. */
- unsigned int handled_ipmb_responses;
- /* The response had invalid data in it. */
- unsigned int invalid_ipmb_responses;
- /* The response didn't have anyone waiting for it. */
- unsigned int unhandled_ipmb_responses;
-
- /* Commands we sent out to the IPMB bus. */
- unsigned int sent_lan_commands;
- /* Commands sent on the IPMB that had errors on the SEND CMD */
- unsigned int sent_lan_command_errs;
- /* Each retransmit increments this count. */
- unsigned int retransmitted_lan_commands;
- /* When a message times out (runs out of retransmits) this is
- incremented. */
- unsigned int timed_out_lan_commands;
-
- /* Responses I have sent to the IPMB bus. */
- unsigned int sent_lan_responses;
-
- /* The response was delivered to the user. */
- unsigned int handled_lan_responses;
- /* The response had invalid data in it. */
- unsigned int invalid_lan_responses;
- /* The response didn't have anyone waiting for it. */
- unsigned int unhandled_lan_responses;
-
- /* The command was delivered to the user. */
- unsigned int handled_commands;
- /* The command had invalid data in it. */
- unsigned int invalid_commands;
- /* The command didn't have anyone waiting for it. */
- unsigned int unhandled_commands;
-
- /* Invalid data in an event. */
- unsigned int invalid_events;
- /* Events that were received with the proper format. */
- unsigned int events;
+ /*
+ * run_to_completion duplicate of smb_info, smi_info
+ * and ipmi_serial_info structures. Used to decrease numbers of
+ * parameters passed by "low" level IPMI code.
+ */
+ int run_to_completion;
};
#define to_si_intf_from_dev(device) container_of(device, struct ipmi_smi, dev)
@@ -368,12 +431,19 @@ static DEFINE_MUTEX(ipmidriver_mutex);
static LIST_HEAD(ipmi_interfaces);
static DEFINE_MUTEX(ipmi_interfaces_mutex);
-/* List of watchers that want to know when smi's are added and
- deleted. */
+/*
+ * List of watchers that want to know when smi's are added and deleted.
+ */
static LIST_HEAD(smi_watchers);
static DEFINE_MUTEX(smi_watchers_mutex);
+#define ipmi_inc_stat(intf, stat) \
+ atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat])
+#define ipmi_get_stat(intf, stat) \
+ ((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat]))
+
+
static void free_recv_msg_list(struct list_head *q)
{
struct ipmi_recv_msg *msg, *msg2;
@@ -417,10 +487,8 @@ static void clean_up_interface_data(ipmi_smi_t intf)
for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) {
if ((intf->seq_table[i].inuse)
- && (intf->seq_table[i].recv_msg))
- {
+ && (intf->seq_table[i].recv_msg))
ipmi_free_recv_msg(intf->seq_table[i].recv_msg);
- }
}
}
@@ -487,6 +555,7 @@ int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher)
}
return -ENOMEM;
}
+EXPORT_SYMBOL(ipmi_smi_watcher_register);
int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher)
{
@@ -495,6 +564,7 @@ int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher)
mutex_unlock(&smi_watchers_mutex);
return 0;
}
+EXPORT_SYMBOL(ipmi_smi_watcher_unregister);
/*
* Must be called with smi_watchers_mutex held.
@@ -530,8 +600,7 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2)
}
if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
- {
+ || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
struct ipmi_ipmb_addr *ipmb_addr1
= (struct ipmi_ipmb_addr *) addr1;
struct ipmi_ipmb_addr *ipmb_addr2
@@ -559,9 +628,8 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2)
int ipmi_validate_addr(struct ipmi_addr *addr, int len)
{
- if (len < sizeof(struct ipmi_system_interface_addr)) {
+ if (len < sizeof(struct ipmi_system_interface_addr))
return -EINVAL;
- }
if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
if (addr->channel != IPMI_BMC_CHANNEL)
@@ -575,23 +643,21 @@ int ipmi_validate_addr(struct ipmi_addr *addr, int len)
return -EINVAL;
if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
- {
- if (len < sizeof(struct ipmi_ipmb_addr)) {
+ || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ if (len < sizeof(struct ipmi_ipmb_addr))
return -EINVAL;
- }
return 0;
}
if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
- if (len < sizeof(struct ipmi_lan_addr)) {
+ if (len < sizeof(struct ipmi_lan_addr))
return -EINVAL;
- }
return 0;
}
return -EINVAL;
}
+EXPORT_SYMBOL(ipmi_validate_addr);
unsigned int ipmi_addr_length(int addr_type)
{
@@ -599,34 +665,28 @@ unsigned int ipmi_addr_length(int addr_type)
return sizeof(struct ipmi_system_interface_addr);
if ((addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
- {
+ || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
return sizeof(struct ipmi_ipmb_addr);
- }
if (addr_type == IPMI_LAN_ADDR_TYPE)
return sizeof(struct ipmi_lan_addr);
return 0;
}
+EXPORT_SYMBOL(ipmi_addr_length);
static void deliver_response(struct ipmi_recv_msg *msg)
{
if (!msg->user) {
ipmi_smi_t intf = msg->user_msg_data;
- unsigned long flags;
/* Special handling for NULL users. */
if (intf->null_user_handler) {
intf->null_user_handler(intf, msg);
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->handled_local_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, handled_local_responses);
} else {
/* No handler, so give up. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->unhandled_local_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, unhandled_local_responses);
}
ipmi_free_recv_msg(msg);
} else {
@@ -646,9 +706,11 @@ deliver_err_response(struct ipmi_recv_msg *msg, int err)
deliver_response(msg);
}
-/* Find the next sequence number not being used and add the given
- message with the given timeout to the sequence table. This must be
- called with the interface's seq_lock held. */
+/*
+ * Find the next sequence number not being used and add the given
+ * message with the given timeout to the sequence table. This must be
+ * called with the interface's seq_lock held.
+ */
static int intf_next_seq(ipmi_smi_t intf,
struct ipmi_recv_msg *recv_msg,
unsigned long timeout,
@@ -660,10 +722,8 @@ static int intf_next_seq(ipmi_smi_t intf,
int rv = 0;
unsigned int i;
- for (i = intf->curr_seq;
- (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq;
- i = (i+1)%IPMI_IPMB_NUM_SEQ)
- {
+ for (i = intf->curr_seq; (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq;
+ i = (i+1)%IPMI_IPMB_NUM_SEQ) {
if (!intf->seq_table[i].inuse)
break;
}
@@ -671,8 +731,10 @@ static int intf_next_seq(ipmi_smi_t intf,
if (!intf->seq_table[i].inuse) {
intf->seq_table[i].recv_msg = recv_msg;
- /* Start with the maximum timeout, when the send response
- comes in we will start the real timer. */
+ /*
+ * Start with the maximum timeout, when the send response
+ * comes in we will start the real timer.
+ */
intf->seq_table[i].timeout = MAX_MSG_TIMEOUT;
intf->seq_table[i].orig_timeout = timeout;
intf->seq_table[i].retries_left = retries;
@@ -685,15 +747,17 @@ static int intf_next_seq(ipmi_smi_t intf,
} else {
rv = -EAGAIN;
}
-
+
return rv;
}
-/* Return the receive message for the given sequence number and
- release the sequence number so it can be reused. Some other data
- is passed in to be sure the message matches up correctly (to help
- guard against message coming in after their timeout and the
- sequence number being reused). */
+/*
+ * Return the receive message for the given sequence number and
+ * release the sequence number so it can be reused. Some other data
+ * is passed in to be sure the message matches up correctly (to help
+ * guard against message coming in after their timeout and the
+ * sequence number being reused).
+ */
static int intf_find_seq(ipmi_smi_t intf,
unsigned char seq,
short channel,
@@ -712,11 +776,9 @@ static int intf_find_seq(ipmi_smi_t intf,
if (intf->seq_table[seq].inuse) {
struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg;
- if ((msg->addr.channel == channel)
- && (msg->msg.cmd == cmd)
- && (msg->msg.netfn == netfn)
- && (ipmi_addr_equal(addr, &(msg->addr))))
- {
+ if ((msg->addr.channel == channel) && (msg->msg.cmd == cmd)
+ && (msg->msg.netfn == netfn)
+ && (ipmi_addr_equal(addr, &(msg->addr)))) {
*recv_msg = msg;
intf->seq_table[seq].inuse = 0;
rv = 0;
@@ -741,11 +803,12 @@ static int intf_start_seq_timer(ipmi_smi_t intf,
GET_SEQ_FROM_MSGID(msgid, seq, seqid);
spin_lock_irqsave(&(intf->seq_lock), flags);
- /* We do this verification because the user can be deleted
- while a message is outstanding. */
+ /*
+ * We do this verification because the user can be deleted
+ * while a message is outstanding.
+ */
if ((intf->seq_table[seq].inuse)
- && (intf->seq_table[seq].seqid == seqid))
- {
+ && (intf->seq_table[seq].seqid == seqid)) {
struct seq_table *ent = &(intf->seq_table[seq]);
ent->timeout = ent->orig_timeout;
rv = 0;
@@ -770,11 +833,12 @@ static int intf_err_seq(ipmi_smi_t intf,
GET_SEQ_FROM_MSGID(msgid, seq, seqid);
spin_lock_irqsave(&(intf->seq_lock), flags);
- /* We do this verification because the user can be deleted
- while a message is outstanding. */
+ /*
+ * We do this verification because the user can be deleted
+ * while a message is outstanding.
+ */
if ((intf->seq_table[seq].inuse)
- && (intf->seq_table[seq].seqid == seqid))
- {
+ && (intf->seq_table[seq].seqid == seqid)) {
struct seq_table *ent = &(intf->seq_table[seq]);
ent->inuse = 0;
@@ -800,24 +864,30 @@ int ipmi_create_user(unsigned int if_num,
int rv = 0;
ipmi_smi_t intf;
- /* There is no module usecount here, because it's not
- required. Since this can only be used by and called from
- other modules, they will implicitly use this module, and
- thus this can't be removed unless the other modules are
- removed. */
+ /*
+ * There is no module usecount here, because it's not
+ * required. Since this can only be used by and called from
+ * other modules, they will implicitly use this module, and
+ * thus this can't be removed unless the other modules are
+ * removed.
+ */
if (handler == NULL)
return -EINVAL;
- /* Make sure the driver is actually initialized, this handles
- problems with initialization order. */
+ /*
+ * Make sure the driver is actually initialized, this handles
+ * problems with initialization order.
+ */
if (!initialized) {
rv = ipmi_init_msghandler();
if (rv)
return rv;
- /* The init code doesn't return an error if it was turned
- off, but it won't initialize. Check that. */
+ /*
+ * The init code doesn't return an error if it was turned
+ * off, but it won't initialize. Check that.
+ */
if (!initialized)
return -ENODEV;
}
@@ -858,8 +928,10 @@ int ipmi_create_user(unsigned int if_num,
}
}
- /* Hold the lock so intf->handlers is guaranteed to be good
- * until now */
+ /*
+ * Hold the lock so intf->handlers is guaranteed to be good
+ * until now
+ */
mutex_unlock(&ipmi_interfaces_mutex);
new_user->valid = 1;
@@ -876,6 +948,7 @@ out_kfree:
kfree(new_user);
return rv;
}
+EXPORT_SYMBOL(ipmi_create_user);
static void free_user(struct kref *ref)
{
@@ -899,8 +972,7 @@ int ipmi_destroy_user(ipmi_user_t user)
for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) {
if (intf->seq_table[i].inuse
- && (intf->seq_table[i].recv_msg->user == user))
- {
+ && (intf->seq_table[i].recv_msg->user == user)) {
intf->seq_table[i].inuse = 0;
ipmi_free_recv_msg(intf->seq_table[i].recv_msg);
}
@@ -943,6 +1015,7 @@ int ipmi_destroy_user(ipmi_user_t user)
return 0;
}
+EXPORT_SYMBOL(ipmi_destroy_user);
void ipmi_get_version(ipmi_user_t user,
unsigned char *major,
@@ -951,6 +1024,7 @@ void ipmi_get_version(ipmi_user_t user,
*major = user->intf->ipmi_version_major;
*minor = user->intf->ipmi_version_minor;
}
+EXPORT_SYMBOL(ipmi_get_version);
int ipmi_set_my_address(ipmi_user_t user,
unsigned int channel,
@@ -961,6 +1035,7 @@ int ipmi_set_my_address(ipmi_user_t user,
user->intf->channels[channel].address = address;
return 0;
}
+EXPORT_SYMBOL(ipmi_set_my_address);
int ipmi_get_my_address(ipmi_user_t user,
unsigned int channel,
@@ -971,6 +1046,7 @@ int ipmi_get_my_address(ipmi_user_t user,
*address = user->intf->channels[channel].address;
return 0;
}
+EXPORT_SYMBOL(ipmi_get_my_address);
int ipmi_set_my_LUN(ipmi_user_t user,
unsigned int channel,
@@ -981,6 +1057,7 @@ int ipmi_set_my_LUN(ipmi_user_t user,
user->intf->channels[channel].lun = LUN & 0x3;
return 0;
}
+EXPORT_SYMBOL(ipmi_set_my_LUN);
int ipmi_get_my_LUN(ipmi_user_t user,
unsigned int channel,
@@ -991,6 +1068,7 @@ int ipmi_get_my_LUN(ipmi_user_t user,
*address = user->intf->channels[channel].lun;
return 0;
}
+EXPORT_SYMBOL(ipmi_get_my_LUN);
int ipmi_get_maintenance_mode(ipmi_user_t user)
{
@@ -1075,6 +1153,11 @@ int ipmi_set_gets_events(ipmi_user_t user, int val)
list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link)
list_move_tail(&msg->link, &msgs);
intf->waiting_events_count = 0;
+ if (intf->event_msg_printed) {
+ printk(KERN_WARNING PFX "Event queue no longer"
+ " full\n");
+ intf->event_msg_printed = 0;
+ }
intf->delivering_events = 1;
spin_unlock_irqrestore(&intf->events_lock, flags);
@@ -1094,6 +1177,7 @@ int ipmi_set_gets_events(ipmi_user_t user, int val)
return 0;
}
+EXPORT_SYMBOL(ipmi_set_gets_events);
static struct cmd_rcvr *find_cmd_rcvr(ipmi_smi_t intf,
unsigned char netfn,
@@ -1159,6 +1243,7 @@ int ipmi_register_for_cmd(ipmi_user_t user,
return rv;
}
+EXPORT_SYMBOL(ipmi_register_for_cmd);
int ipmi_unregister_for_cmd(ipmi_user_t user,
unsigned char netfn,
@@ -1196,19 +1281,13 @@ int ipmi_unregister_for_cmd(ipmi_user_t user,
}
return rv;
}
-
-void ipmi_user_set_run_to_completion(ipmi_user_t user, int val)
-{
- ipmi_smi_t intf = user->intf;
- if (intf->handlers)
- intf->handlers->set_run_to_completion(intf->send_info, val);
-}
+EXPORT_SYMBOL(ipmi_unregister_for_cmd);
static unsigned char
ipmb_checksum(unsigned char *data, int size)
{
unsigned char csum = 0;
-
+
for (; size > 0; size--, data++)
csum += *data;
@@ -1250,8 +1329,10 @@ static inline void format_ipmb_msg(struct ipmi_smi_msg *smi_msg,
= ipmb_checksum(&(smi_msg->data[i+6]),
smi_msg->data_size-6);
- /* Add on the checksum size and the offset from the
- broadcast. */
+ /*
+ * Add on the checksum size and the offset from the
+ * broadcast.
+ */
smi_msg->data_size += 1 + i;
smi_msg->msgid = msgid;
@@ -1287,17 +1368,21 @@ static inline void format_lan_msg(struct ipmi_smi_msg *smi_msg,
= ipmb_checksum(&(smi_msg->data[7]),
smi_msg->data_size-7);
- /* Add on the checksum size and the offset from the
- broadcast. */
+ /*
+ * Add on the checksum size and the offset from the
+ * broadcast.
+ */
smi_msg->data_size += 1;
smi_msg->msgid = msgid;
}
-/* Separate from ipmi_request so that the user does not have to be
- supplied in certain circumstances (mainly at panic time). If
- messages are supplied, they will be freed, even if an error
- occurs. */
+/*
+ * Separate from ipmi_request so that the user does not have to be
+ * supplied in certain circumstances (mainly at panic time). If
+ * messages are supplied, they will be freed, even if an error
+ * occurs.
+ */
static int i_ipmi_request(ipmi_user_t user,
ipmi_smi_t intf,
struct ipmi_addr *addr,
@@ -1319,19 +1404,18 @@ static int i_ipmi_request(ipmi_user_t user,
struct ipmi_smi_handlers *handlers;
- if (supplied_recv) {
+ if (supplied_recv)
recv_msg = supplied_recv;
- } else {
+ else {
recv_msg = ipmi_alloc_recv_msg();
- if (recv_msg == NULL) {
+ if (recv_msg == NULL)
return -ENOMEM;
- }
}
recv_msg->user_msg_data = user_msg_data;
- if (supplied_smi) {
+ if (supplied_smi)
smi_msg = (struct ipmi_smi_msg *) supplied_smi;
- } else {
+ else {
smi_msg = ipmi_alloc_smi_msg();
if (smi_msg == NULL) {
ipmi_free_recv_msg(recv_msg);
@@ -1350,8 +1434,10 @@ static int i_ipmi_request(ipmi_user_t user,
if (user)
kref_get(&user->refcount);
recv_msg->msgid = msgid;
- /* Store the message to send in the receive message so timeout
- responses can get the proper response data. */
+ /*
+ * Store the message to send in the receive message so timeout
+ * responses can get the proper response data.
+ */
recv_msg->msg = *msg;
if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
@@ -1365,9 +1451,7 @@ static int i_ipmi_request(ipmi_user_t user,
smi_addr = (struct ipmi_system_interface_addr *) addr;
if (smi_addr->lun > 3) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
@@ -1377,13 +1461,12 @@ static int i_ipmi_request(ipmi_user_t user,
if ((msg->netfn == IPMI_NETFN_APP_REQUEST)
&& ((msg->cmd == IPMI_SEND_MSG_CMD)
|| (msg->cmd == IPMI_GET_MSG_CMD)
- || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD)))
- {
- /* We don't let the user do these, since we manage
- the sequence numbers. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) {
+ /*
+ * We don't let the user do these, since we manage
+ * the sequence numbers.
+ */
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
@@ -1391,14 +1474,12 @@ static int i_ipmi_request(ipmi_user_t user,
if (((msg->netfn == IPMI_NETFN_APP_REQUEST)
&& ((msg->cmd == IPMI_COLD_RESET_CMD)
|| (msg->cmd == IPMI_WARM_RESET_CMD)))
- || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST))
- {
+ || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST)) {
spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
intf->auto_maintenance_timeout
= IPMI_MAINTENANCE_MODE_TIMEOUT;
if (!intf->maintenance_mode
- && !intf->maintenance_mode_enable)
- {
+ && !intf->maintenance_mode_enable) {
intf->maintenance_mode_enable = 1;
maintenance_mode_update(intf);
}
@@ -1407,9 +1488,7 @@ static int i_ipmi_request(ipmi_user_t user,
}
if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EMSGSIZE;
goto out_err;
}
@@ -1421,31 +1500,23 @@ static int i_ipmi_request(ipmi_user_t user,
if (msg->data_len > 0)
memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
smi_msg->data_size = msg->data_len + 2;
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_local_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_local_commands);
} else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
- {
+ || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
struct ipmi_ipmb_addr *ipmb_addr;
unsigned char ipmb_seq;
long seqid;
int broadcast = 0;
if (addr->channel >= IPMI_MAX_CHANNELS) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
if (intf->channels[addr->channel].medium
- != IPMI_CHANNEL_MEDIUM_IPMB)
- {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ != IPMI_CHANNEL_MEDIUM_IPMB) {
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
@@ -1457,9 +1528,11 @@ static int i_ipmi_request(ipmi_user_t user,
retries = 4;
}
if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) {
- /* Broadcasts add a zero at the beginning of the
- message, but otherwise is the same as an IPMB
- address. */
+ /*
+ * Broadcasts add a zero at the beginning of the
+ * message, but otherwise is the same as an IPMB
+ * address.
+ */
addr->addr_type = IPMI_IPMB_ADDR_TYPE;
broadcast = 1;
}
@@ -1469,21 +1542,19 @@ static int i_ipmi_request(ipmi_user_t user,
if (retry_time_ms == 0)
retry_time_ms = 1000;
- /* 9 for the header and 1 for the checksum, plus
- possibly one for the broadcast. */
+ /*
+ * 9 for the header and 1 for the checksum, plus
+ * possibly one for the broadcast.
+ */
if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EMSGSIZE;
goto out_err;
}
ipmb_addr = (struct ipmi_ipmb_addr *) addr;
if (ipmb_addr->lun > 3) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
@@ -1491,29 +1562,31 @@ static int i_ipmi_request(ipmi_user_t user,
memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr));
if (recv_msg->msg.netfn & 0x1) {
- /* It's a response, so use the user's sequence
- from msgid. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_ipmb_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ /*
+ * It's a response, so use the user's sequence
+ * from msgid.
+ */
+ ipmi_inc_stat(intf, sent_ipmb_responses);
format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid,
msgid, broadcast,
source_address, source_lun);
- /* Save the receive message so we can use it
- to deliver the response. */
+ /*
+ * Save the receive message so we can use it
+ * to deliver the response.
+ */
smi_msg->user_data = recv_msg;
} else {
/* It's a command, so get a sequence for it. */
spin_lock_irqsave(&(intf->seq_lock), flags);
- spin_lock(&intf->counter_lock);
- intf->sent_ipmb_commands++;
- spin_unlock(&intf->counter_lock);
+ ipmi_inc_stat(intf, sent_ipmb_commands);
- /* Create a sequence number with a 1 second
- timeout and 4 retries. */
+ /*
+ * Create a sequence number with a 1 second
+ * timeout and 4 retries.
+ */
rv = intf_next_seq(intf,
recv_msg,
retry_time_ms,
@@ -1522,34 +1595,42 @@ static int i_ipmi_request(ipmi_user_t user,
&ipmb_seq,
&seqid);
if (rv) {
- /* We have used up all the sequence numbers,
- probably, so abort. */
+ /*
+ * We have used up all the sequence numbers,
+ * probably, so abort.
+ */
spin_unlock_irqrestore(&(intf->seq_lock),
flags);
goto out_err;
}
- /* Store the sequence number in the message,
- so that when the send message response
- comes back we can start the timer. */
+ /*
+ * Store the sequence number in the message,
+ * so that when the send message response
+ * comes back we can start the timer.
+ */
format_ipmb_msg(smi_msg, msg, ipmb_addr,
STORE_SEQ_IN_MSGID(ipmb_seq, seqid),
ipmb_seq, broadcast,
source_address, source_lun);
- /* Copy the message into the recv message data, so we
- can retransmit it later if necessary. */
+ /*
+ * Copy the message into the recv message data, so we
+ * can retransmit it later if necessary.
+ */
memcpy(recv_msg->msg_data, smi_msg->data,
smi_msg->data_size);
recv_msg->msg.data = recv_msg->msg_data;
recv_msg->msg.data_len = smi_msg->data_size;
- /* We don't unlock until here, because we need
- to copy the completed message into the
- recv_msg before we release the lock.
- Otherwise, race conditions may bite us. I
- know that's pretty paranoid, but I prefer
- to be correct. */
+ /*
+ * We don't unlock until here, because we need
+ * to copy the completed message into the
+ * recv_msg before we release the lock.
+ * Otherwise, race conditions may bite us. I
+ * know that's pretty paranoid, but I prefer
+ * to be correct.
+ */
spin_unlock_irqrestore(&(intf->seq_lock), flags);
}
} else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
@@ -1558,21 +1639,16 @@ static int i_ipmi_request(ipmi_user_t user,
long seqid;
if (addr->channel >= IPMI_MAX_CHANNELS) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
if ((intf->channels[addr->channel].medium
- != IPMI_CHANNEL_MEDIUM_8023LAN)
+ != IPMI_CHANNEL_MEDIUM_8023LAN)
&& (intf->channels[addr->channel].medium
- != IPMI_CHANNEL_MEDIUM_ASYNC))
- {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ != IPMI_CHANNEL_MEDIUM_ASYNC)) {
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
@@ -1585,18 +1661,14 @@ static int i_ipmi_request(ipmi_user_t user,
/* 11 for the header and 1 for the checksum. */
if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EMSGSIZE;
goto out_err;
}
lan_addr = (struct ipmi_lan_addr *) addr;
if (lan_addr->lun > 3) {
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
@@ -1604,28 +1676,30 @@ static int i_ipmi_request(ipmi_user_t user,
memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr));
if (recv_msg->msg.netfn & 0x1) {
- /* It's a response, so use the user's sequence
- from msgid. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_lan_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ /*
+ * It's a response, so use the user's sequence
+ * from msgid.
+ */
+ ipmi_inc_stat(intf, sent_lan_responses);
format_lan_msg(smi_msg, msg, lan_addr, msgid,
msgid, source_lun);
- /* Save the receive message so we can use it
- to deliver the response. */
+ /*
+ * Save the receive message so we can use it
+ * to deliver the response.
+ */
smi_msg->user_data = recv_msg;
} else {
/* It's a command, so get a sequence for it. */
spin_lock_irqsave(&(intf->seq_lock), flags);
- spin_lock(&intf->counter_lock);
- intf->sent_lan_commands++;
- spin_unlock(&intf->counter_lock);
+ ipmi_inc_stat(intf, sent_lan_commands);
- /* Create a sequence number with a 1 second
- timeout and 4 retries. */
+ /*
+ * Create a sequence number with a 1 second
+ * timeout and 4 retries.
+ */
rv = intf_next_seq(intf,
recv_msg,
retry_time_ms,
@@ -1634,40 +1708,46 @@ static int i_ipmi_request(ipmi_user_t user,
&ipmb_seq,
&seqid);
if (rv) {
- /* We have used up all the sequence numbers,
- probably, so abort. */
+ /*
+ * We have used up all the sequence numbers,
+ * probably, so abort.
+ */
spin_unlock_irqrestore(&(intf->seq_lock),
flags);
goto out_err;
}
- /* Store the sequence number in the message,
- so that when the send message response
- comes back we can start the timer. */
+ /*
+ * Store the sequence number in the message,
+ * so that when the send message response
+ * comes back we can start the timer.
+ */
format_lan_msg(smi_msg, msg, lan_addr,
STORE_SEQ_IN_MSGID(ipmb_seq, seqid),
ipmb_seq, source_lun);
- /* Copy the message into the recv message data, so we
- can retransmit it later if necessary. */
+ /*
+ * Copy the message into the recv message data, so we
+ * can retransmit it later if necessary.
+ */
memcpy(recv_msg->msg_data, smi_msg->data,
smi_msg->data_size);
recv_msg->msg.data = recv_msg->msg_data;
recv_msg->msg.data_len = smi_msg->data_size;
- /* We don't unlock until here, because we need
- to copy the completed message into the
- recv_msg before we release the lock.
- Otherwise, race conditions may bite us. I
- know that's pretty paranoid, but I prefer
- to be correct. */
+ /*
+ * We don't unlock until here, because we need
+ * to copy the completed message into the
+ * recv_msg before we release the lock.
+ * Otherwise, race conditions may bite us. I
+ * know that's pretty paranoid, but I prefer
+ * to be correct.
+ */
spin_unlock_irqrestore(&(intf->seq_lock), flags);
}
} else {
/* Unknown address type. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->sent_invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_invalid_commands);
rv = -EINVAL;
goto out_err;
}
@@ -1735,6 +1815,7 @@ int ipmi_request_settime(ipmi_user_t user,
retries,
retry_time_ms);
}
+EXPORT_SYMBOL(ipmi_request_settime);
int ipmi_request_supply_msgs(ipmi_user_t user,
struct ipmi_addr *addr,
@@ -1766,6 +1847,7 @@ int ipmi_request_supply_msgs(ipmi_user_t user,
lun,
-1, 0);
}
+EXPORT_SYMBOL(ipmi_request_supply_msgs);
#ifdef CONFIG_PROC_FS
static int ipmb_file_read_proc(char *page, char **start, off_t off,
@@ -1790,7 +1872,7 @@ static int version_file_read_proc(char *page, char **start, off_t off,
char *out = (char *) page;
ipmi_smi_t intf = data;
- return sprintf(out, "%d.%d\n",
+ return sprintf(out, "%u.%u\n",
ipmi_version_major(&intf->bmc->id),
ipmi_version_minor(&intf->bmc->id));
}
@@ -1801,65 +1883,65 @@ static int stat_file_read_proc(char *page, char **start, off_t off,
char *out = (char *) page;
ipmi_smi_t intf = data;
- out += sprintf(out, "sent_invalid_commands: %d\n",
- intf->sent_invalid_commands);
- out += sprintf(out, "sent_local_commands: %d\n",
- intf->sent_local_commands);
- out += sprintf(out, "handled_local_responses: %d\n",
- intf->handled_local_responses);
- out += sprintf(out, "unhandled_local_responses: %d\n",
- intf->unhandled_local_responses);
- out += sprintf(out, "sent_ipmb_commands: %d\n",
- intf->sent_ipmb_commands);
- out += sprintf(out, "sent_ipmb_command_errs: %d\n",
- intf->sent_ipmb_command_errs);
- out += sprintf(out, "retransmitted_ipmb_commands: %d\n",
- intf->retransmitted_ipmb_commands);
- out += sprintf(out, "timed_out_ipmb_commands: %d\n",
- intf->timed_out_ipmb_commands);
- out += sprintf(out, "timed_out_ipmb_broadcasts: %d\n",
- intf->timed_out_ipmb_broadcasts);
- out += sprintf(out, "sent_ipmb_responses: %d\n",
- intf->sent_ipmb_responses);
- out += sprintf(out, "handled_ipmb_responses: %d\n",
- intf->handled_ipmb_responses);
- out += sprintf(out, "invalid_ipmb_responses: %d\n",
- intf->invalid_ipmb_responses);
- out += sprintf(out, "unhandled_ipmb_responses: %d\n",
- intf->unhandled_ipmb_responses);
- out += sprintf(out, "sent_lan_commands: %d\n",
- intf->sent_lan_commands);
- out += sprintf(out, "sent_lan_command_errs: %d\n",
- intf->sent_lan_command_errs);
- out += sprintf(out, "retransmitted_lan_commands: %d\n",
- intf->retransmitted_lan_commands);
- out += sprintf(out, "timed_out_lan_commands: %d\n",
- intf->timed_out_lan_commands);
- out += sprintf(out, "sent_lan_responses: %d\n",
- intf->sent_lan_responses);
- out += sprintf(out, "handled_lan_responses: %d\n",
- intf->handled_lan_responses);
- out += sprintf(out, "invalid_lan_responses: %d\n",
- intf->invalid_lan_responses);
- out += sprintf(out, "unhandled_lan_responses: %d\n",
- intf->unhandled_lan_responses);
- out += sprintf(out, "handled_commands: %d\n",
- intf->handled_commands);
- out += sprintf(out, "invalid_commands: %d\n",
- intf->invalid_commands);
- out += sprintf(out, "unhandled_commands: %d\n",
- intf->unhandled_commands);
- out += sprintf(out, "invalid_events: %d\n",
- intf->invalid_events);
- out += sprintf(out, "events: %d\n",
- intf->events);
+ out += sprintf(out, "sent_invalid_commands: %u\n",
+ ipmi_get_stat(intf, sent_invalid_commands));
+ out += sprintf(out, "sent_local_commands: %u\n",
+ ipmi_get_stat(intf, sent_local_commands));
+ out += sprintf(out, "handled_local_responses: %u\n",
+ ipmi_get_stat(intf, handled_local_responses));
+ out += sprintf(out, "unhandled_local_responses: %u\n",
+ ipmi_get_stat(intf, unhandled_local_responses));
+ out += sprintf(out, "sent_ipmb_commands: %u\n",
+ ipmi_get_stat(intf, sent_ipmb_commands));
+ out += sprintf(out, "sent_ipmb_command_errs: %u\n",
+ ipmi_get_stat(intf, sent_ipmb_command_errs));
+ out += sprintf(out, "retransmitted_ipmb_commands: %u\n",
+ ipmi_get_stat(intf, retransmitted_ipmb_commands));
+ out += sprintf(out, "timed_out_ipmb_commands: %u\n",
+ ipmi_get_stat(intf, timed_out_ipmb_commands));
+ out += sprintf(out, "timed_out_ipmb_broadcasts: %u\n",
+ ipmi_get_stat(intf, timed_out_ipmb_broadcasts));
+ out += sprintf(out, "sent_ipmb_responses: %u\n",
+ ipmi_get_stat(intf, sent_ipmb_responses));
+ out += sprintf(out, "handled_ipmb_responses: %u\n",
+ ipmi_get_stat(intf, handled_ipmb_responses));
+ out += sprintf(out, "invalid_ipmb_responses: %u\n",
+ ipmi_get_stat(intf, invalid_ipmb_responses));
+ out += sprintf(out, "unhandled_ipmb_responses: %u\n",
+ ipmi_get_stat(intf, unhandled_ipmb_responses));
+ out += sprintf(out, "sent_lan_commands: %u\n",
+ ipmi_get_stat(intf, sent_lan_commands));
+ out += sprintf(out, "sent_lan_command_errs: %u\n",
+ ipmi_get_stat(intf, sent_lan_command_errs));
+ out += sprintf(out, "retransmitted_lan_commands: %u\n",
+ ipmi_get_stat(intf, retransmitted_lan_commands));
+ out += sprintf(out, "timed_out_lan_commands: %u\n",
+ ipmi_get_stat(intf, timed_out_lan_commands));
+ out += sprintf(out, "sent_lan_responses: %u\n",
+ ipmi_get_stat(intf, sent_lan_responses));
+ out += sprintf(out, "handled_lan_responses: %u\n",
+ ipmi_get_stat(intf, handled_lan_responses));
+ out += sprintf(out, "invalid_lan_responses: %u\n",
+ ipmi_get_stat(intf, invalid_lan_responses));
+ out += sprintf(out, "unhandled_lan_responses: %u\n",
+ ipmi_get_stat(intf, unhandled_lan_responses));
+ out += sprintf(out, "handled_commands: %u\n",
+ ipmi_get_stat(intf, handled_commands));
+ out += sprintf(out, "invalid_commands: %u\n",
+ ipmi_get_stat(intf, invalid_commands));
+ out += sprintf(out, "unhandled_commands: %u\n",
+ ipmi_get_stat(intf, unhandled_commands));
+ out += sprintf(out, "invalid_events: %u\n",
+ ipmi_get_stat(intf, invalid_events));
+ out += sprintf(out, "events: %u\n",
+ ipmi_get_stat(intf, events));
return (out - ((char *) page));
}
#endif /* CONFIG_PROC_FS */
int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
- read_proc_t *read_proc, write_proc_t *write_proc,
+ read_proc_t *read_proc,
void *data, struct module *owner)
{
int rv = 0;
@@ -1886,7 +1968,6 @@ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
} else {
file->data = data;
file->read_proc = read_proc;
- file->write_proc = write_proc;
file->owner = owner;
mutex_lock(&smi->proc_entry_lock);
@@ -1899,6 +1980,7 @@ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
return rv;
}
+EXPORT_SYMBOL(ipmi_smi_add_proc_entry);
static int add_proc_entries(ipmi_smi_t smi, int num)
{
@@ -1909,23 +1991,22 @@ static int add_proc_entries(ipmi_smi_t smi, int num)
smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root);
if (!smi->proc_dir)
rv = -ENOMEM;
- else {
+ else
smi->proc_dir->owner = THIS_MODULE;
- }
if (rv == 0)
rv = ipmi_smi_add_proc_entry(smi, "stats",
- stat_file_read_proc, NULL,
+ stat_file_read_proc,
smi, THIS_MODULE);
if (rv == 0)
rv = ipmi_smi_add_proc_entry(smi, "ipmb",
- ipmb_file_read_proc, NULL,
+ ipmb_file_read_proc,
smi, THIS_MODULE);
if (rv == 0)
rv = ipmi_smi_add_proc_entry(smi, "version",
- version_file_read_proc, NULL,
+ version_file_read_proc,
smi, THIS_MODULE);
#endif /* CONFIG_PROC_FS */
@@ -2210,37 +2291,47 @@ static int create_files(struct bmc_device *bmc)
err = device_create_file(&bmc->dev->dev,
&bmc->device_id_attr);
- if (err) goto out;
+ if (err)
+ goto out;
err = device_create_file(&bmc->dev->dev,
&bmc->provides_dev_sdrs_attr);
- if (err) goto out_devid;
+ if (err)
+ goto out_devid;
err = device_create_file(&bmc->dev->dev,
&bmc->revision_attr);
- if (err) goto out_sdrs;
+ if (err)
+ goto out_sdrs;
err = device_create_file(&bmc->dev->dev,
&bmc->firmware_rev_attr);
- if (err) goto out_rev;
+ if (err)
+ goto out_rev;
err = device_create_file(&bmc->dev->dev,
&bmc->version_attr);
- if (err) goto out_firm;
+ if (err)
+ goto out_firm;
err = device_create_file(&bmc->dev->dev,
&bmc->add_dev_support_attr);
- if (err) goto out_version;
+ if (err)
+ goto out_version;
err = device_create_file(&bmc->dev->dev,
&bmc->manufacturer_id_attr);
- if (err) goto out_add_dev;
+ if (err)
+ goto out_add_dev;
err = device_create_file(&bmc->dev->dev,
&bmc->product_id_attr);
- if (err) goto out_manu;
+ if (err)
+ goto out_manu;
if (bmc->id.aux_firmware_revision_set) {
err = device_create_file(&bmc->dev->dev,
&bmc->aux_firmware_rev_attr);
- if (err) goto out_prod_id;
+ if (err)
+ goto out_prod_id;
}
if (bmc->guid_set) {
err = device_create_file(&bmc->dev->dev,
&bmc->guid_attr);
- if (err) goto out_aux_firm;
+ if (err)
+ goto out_aux_firm;
}
return 0;
@@ -2368,8 +2459,10 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
"ipmi_msghandler:"
" Unable to register bmc device: %d\n",
rv);
- /* Don't go to out_err, you can only do that if
- the device is registered already. */
+ /*
+ * Don't go to out_err, you can only do that if
+ * the device is registered already.
+ */
return rv;
}
@@ -2560,17 +2653,18 @@ channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
&& (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE)
- && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD))
- {
+ && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD)) {
/* It's the one we want */
if (msg->msg.data[0] != 0) {
/* Got an error from the channel, just go on. */
if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) {
- /* If the MC does not support this
- command, that is legal. We just
- assume it has one IPMB at channel
- zero. */
+ /*
+ * If the MC does not support this
+ * command, that is legal. We just
+ * assume it has one IPMB at channel
+ * zero.
+ */
intf->channels[0].medium
= IPMI_CHANNEL_MEDIUM_IPMB;
intf->channels[0].protocol
@@ -2591,7 +2685,7 @@ channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
intf->channels[chan].medium = msg->msg.data[2] & 0x7f;
intf->channels[chan].protocol = msg->msg.data[3] & 0x1f;
- next_channel:
+ next_channel:
intf->curr_channel++;
if (intf->curr_channel >= IPMI_MAX_CHANNELS)
wake_up(&intf->waitq);
@@ -2619,6 +2713,7 @@ void ipmi_poll_interface(ipmi_user_t user)
if (intf->handlers->poll)
intf->handlers->poll(intf->send_info);
}
+EXPORT_SYMBOL(ipmi_poll_interface);
int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
void *send_info,
@@ -2633,14 +2728,18 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
ipmi_smi_t tintf;
struct list_head *link;
- /* Make sure the driver is actually initialized, this handles
- problems with initialization order. */
+ /*
+ * Make sure the driver is actually initialized, this handles
+ * problems with initialization order.
+ */
if (!initialized) {
rv = ipmi_init_msghandler();
if (rv)
return rv;
- /* The init code doesn't return an error if it was turned
- off, but it won't initialize. Check that. */
+ /*
+ * The init code doesn't return an error if it was turned
+ * off, but it won't initialize. Check that.
+ */
if (!initialized)
return -ENODEV;
}
@@ -2688,8 +2787,9 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
spin_lock_init(&intf->maintenance_mode_lock);
INIT_LIST_HEAD(&intf->cmd_rcvrs);
init_waitqueue_head(&intf->waitq);
+ for (i = 0; i < IPMI_NUM_STATS; i++)
+ atomic_set(&intf->stats[i], 0);
- spin_lock_init(&intf->counter_lock);
intf->proc_dir = NULL;
mutex_lock(&smi_watchers_mutex);
@@ -2717,11 +2817,12 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
get_guid(intf);
if ((intf->ipmi_version_major > 1)
- || ((intf->ipmi_version_major == 1)
- && (intf->ipmi_version_minor >= 5)))
- {
- /* Start scanning the channels to see what is
- available. */
+ || ((intf->ipmi_version_major == 1)
+ && (intf->ipmi_version_minor >= 5))) {
+ /*
+ * Start scanning the channels to see what is
+ * available.
+ */
intf->null_user_handler = channel_handler;
intf->curr_channel = 0;
rv = send_channel_info_cmd(intf, 0);
@@ -2769,6 +2870,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
return rv;
}
+EXPORT_SYMBOL(ipmi_register_smi);
static void cleanup_smi_msgs(ipmi_smi_t intf)
{
@@ -2803,8 +2905,10 @@ int ipmi_unregister_smi(ipmi_smi_t intf)
remove_proc_entries(intf);
- /* Call all the watcher interfaces to tell them that
- an interface is gone. */
+ /*
+ * Call all the watcher interfaces to tell them that
+ * an interface is gone.
+ */
list_for_each_entry(w, &smi_watchers, link)
w->smi_gone(intf_num);
mutex_unlock(&smi_watchers_mutex);
@@ -2812,22 +2916,21 @@ int ipmi_unregister_smi(ipmi_smi_t intf)
kref_put(&intf->refcount, intf_free);
return 0;
}
+EXPORT_SYMBOL(ipmi_unregister_smi);
static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf,
struct ipmi_smi_msg *msg)
{
struct ipmi_ipmb_addr ipmb_addr;
struct ipmi_recv_msg *recv_msg;
- unsigned long flags;
-
- /* This is 11, not 10, because the response must contain a
- * completion code. */
+ /*
+ * This is 11, not 10, because the response must contain a
+ * completion code.
+ */
if (msg->rsp_size < 11) {
/* Message not big enough, just ignore it. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->invalid_ipmb_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, invalid_ipmb_responses);
return 0;
}
@@ -2841,37 +2944,38 @@ static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf,
ipmb_addr.channel = msg->rsp[3] & 0x0f;
ipmb_addr.lun = msg->rsp[7] & 3;
- /* It's a response from a remote entity. Look up the sequence
- number and handle the response. */
+ /*
+ * It's a response from a remote entity. Look up the sequence
+ * number and handle the response.
+ */
if (intf_find_seq(intf,
msg->rsp[7] >> 2,
msg->rsp[3] & 0x0f,
msg->rsp[8],
(msg->rsp[4] >> 2) & (~1),
(struct ipmi_addr *) &(ipmb_addr),
- &recv_msg))
- {
- /* We were unable to find the sequence number,
- so just nuke the message. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->unhandled_ipmb_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ &recv_msg)) {
+ /*
+ * We were unable to find the sequence number,
+ * so just nuke the message.
+ */
+ ipmi_inc_stat(intf, unhandled_ipmb_responses);
return 0;
}
memcpy(recv_msg->msg_data,
&(msg->rsp[9]),
msg->rsp_size - 9);
- /* THe other fields matched, so no need to set them, except
- for netfn, which needs to be the response that was
- returned, not the request value. */
+ /*
+ * The other fields matched, so no need to set them, except
+ * for netfn, which needs to be the response that was
+ * returned, not the request value.
+ */
recv_msg->msg.netfn = msg->rsp[4] >> 2;
recv_msg->msg.data = recv_msg->msg_data;
recv_msg->msg.data_len = msg->rsp_size - 10;
recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->handled_ipmb_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, handled_ipmb_responses);
deliver_response(recv_msg);
return 0;
@@ -2888,14 +2992,11 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf,
ipmi_user_t user = NULL;
struct ipmi_ipmb_addr *ipmb_addr;
struct ipmi_recv_msg *recv_msg;
- unsigned long flags;
struct ipmi_smi_handlers *handlers;
if (msg->rsp_size < 10) {
/* Message not big enough, just ignore it. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, invalid_commands);
return 0;
}
@@ -2919,19 +3020,17 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf,
if (user == NULL) {
/* We didn't find a user, deliver an error response. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->unhandled_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, unhandled_commands);
msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg->data[1] = IPMI_SEND_MSG_CMD;
msg->data[2] = msg->rsp[3];
msg->data[3] = msg->rsp[6];
- msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3);
+ msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3);
msg->data[5] = ipmb_checksum(&(msg->data[3]), 2);
msg->data[6] = intf->channels[msg->rsp[3] & 0xf].address;
- /* rqseq/lun */
- msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3);
+ /* rqseq/lun */
+ msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3);
msg->data[8] = msg->rsp[8]; /* cmd */
msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE;
msg->data[10] = ipmb_checksum(&(msg->data[6]), 4);
@@ -2950,23 +3049,25 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf,
handlers = intf->handlers;
if (handlers) {
handlers->sender(intf->send_info, msg, 0);
- /* We used the message, so return the value
- that causes it to not be freed or
- queued. */
+ /*
+ * We used the message, so return the value
+ * that causes it to not be freed or
+ * queued.
+ */
rv = -1;
}
rcu_read_unlock();
} else {
/* Deliver the message to the user. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->handled_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, handled_commands);
recv_msg = ipmi_alloc_recv_msg();
if (!recv_msg) {
- /* We couldn't allocate memory for the
- message, so requeue it for handling
- later. */
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling
+ * later.
+ */
rv = 1;
kref_put(&user->refcount, free_user);
} else {
@@ -2977,8 +3078,10 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf,
ipmb_addr->lun = msg->rsp[7] & 3;
ipmb_addr->channel = msg->rsp[3] & 0xf;
- /* Extract the rest of the message information
- from the IPMB header.*/
+ /*
+ * Extract the rest of the message information
+ * from the IPMB header.
+ */
recv_msg->user = user;
recv_msg->recv_type = IPMI_CMD_RECV_TYPE;
recv_msg->msgid = msg->rsp[7] >> 2;
@@ -2986,8 +3089,10 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf,
recv_msg->msg.cmd = msg->rsp[8];
recv_msg->msg.data = recv_msg->msg_data;
- /* We chop off 10, not 9 bytes because the checksum
- at the end also needs to be removed. */
+ /*
+ * We chop off 10, not 9 bytes because the checksum
+ * at the end also needs to be removed.
+ */
recv_msg->msg.data_len = msg->rsp_size - 10;
memcpy(recv_msg->msg_data,
&(msg->rsp[9]),
@@ -3004,16 +3109,15 @@ static int handle_lan_get_msg_rsp(ipmi_smi_t intf,
{
struct ipmi_lan_addr lan_addr;
struct ipmi_recv_msg *recv_msg;
- unsigned long flags;
- /* This is 13, not 12, because the response must contain a
- * completion code. */
+ /*
+ * This is 13, not 12, because the response must contain a
+ * completion code.
+ */
if (msg->rsp_size < 13) {
/* Message not big enough, just ignore it. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->invalid_lan_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, invalid_lan_responses);
return 0;
}
@@ -3030,37 +3134,38 @@ static int handle_lan_get_msg_rsp(ipmi_smi_t intf,
lan_addr.privilege = msg->rsp[3] >> 4;
lan_addr.lun = msg->rsp[9] & 3;
- /* It's a response from a remote entity. Look up the sequence
- number and handle the response. */
+ /*
+ * It's a response from a remote entity. Look up the sequence
+ * number and handle the response.
+ */
if (intf_find_seq(intf,
msg->rsp[9] >> 2,
msg->rsp[3] & 0x0f,
msg->rsp[10],
(msg->rsp[6] >> 2) & (~1),
(struct ipmi_addr *) &(lan_addr),
- &recv_msg))
- {
- /* We were unable to find the sequence number,
- so just nuke the message. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->unhandled_lan_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ &recv_msg)) {
+ /*
+ * We were unable to find the sequence number,
+ * so just nuke the message.
+ */
+ ipmi_inc_stat(intf, unhandled_lan_responses);
return 0;
}
memcpy(recv_msg->msg_data,
&(msg->rsp[11]),
msg->rsp_size - 11);
- /* The other fields matched, so no need to set them, except
- for netfn, which needs to be the response that was
- returned, not the request value. */
+ /*
+ * The other fields matched, so no need to set them, except
+ * for netfn, which needs to be the response that was
+ * returned, not the request value.
+ */
recv_msg->msg.netfn = msg->rsp[6] >> 2;
recv_msg->msg.data = recv_msg->msg_data;
recv_msg->msg.data_len = msg->rsp_size - 12;
recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->handled_lan_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, handled_lan_responses);
deliver_response(recv_msg);
return 0;
@@ -3077,13 +3182,10 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf,
ipmi_user_t user = NULL;
struct ipmi_lan_addr *lan_addr;
struct ipmi_recv_msg *recv_msg;
- unsigned long flags;
if (msg->rsp_size < 12) {
/* Message not big enough, just ignore it. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->invalid_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, invalid_commands);
return 0;
}
@@ -3107,23 +3209,23 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf,
if (user == NULL) {
/* We didn't find a user, just give up. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->unhandled_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, unhandled_commands);
- rv = 0; /* Don't do anything with these messages, just
- allow them to be freed. */
+ /*
+ * Don't do anything with these messages, just allow
+ * them to be freed.
+ */
+ rv = 0;
} else {
/* Deliver the message to the user. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->handled_commands++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, handled_commands);
recv_msg = ipmi_alloc_recv_msg();
if (!recv_msg) {
- /* We couldn't allocate memory for the
- message, so requeue it for handling
- later. */
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling later.
+ */
rv = 1;
kref_put(&user->refcount, free_user);
} else {
@@ -3137,8 +3239,10 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf,
lan_addr->channel = msg->rsp[3] & 0xf;
lan_addr->privilege = msg->rsp[3] >> 4;
- /* Extract the rest of the message information
- from the IPMB header.*/
+ /*
+ * Extract the rest of the message information
+ * from the IPMB header.
+ */
recv_msg->user = user;
recv_msg->recv_type = IPMI_CMD_RECV_TYPE;
recv_msg->msgid = msg->rsp[9] >> 2;
@@ -3146,8 +3250,10 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf,
recv_msg->msg.cmd = msg->rsp[10];
recv_msg->msg.data = recv_msg->msg_data;
- /* We chop off 12, not 11 bytes because the checksum
- at the end also needs to be removed. */
+ /*
+ * We chop off 12, not 11 bytes because the checksum
+ * at the end also needs to be removed.
+ */
recv_msg->msg.data_len = msg->rsp_size - 12;
memcpy(recv_msg->msg_data,
&(msg->rsp[11]),
@@ -3163,7 +3269,7 @@ static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
struct ipmi_smi_msg *msg)
{
struct ipmi_system_interface_addr *smi_addr;
-
+
recv_msg->msgid = 0;
smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr);
smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
@@ -3189,9 +3295,7 @@ static int handle_read_event_rsp(ipmi_smi_t intf,
if (msg->rsp_size < 19) {
/* Message is too small to be an IPMB event. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->invalid_events++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, invalid_events);
return 0;
}
@@ -3204,12 +3308,12 @@ static int handle_read_event_rsp(ipmi_smi_t intf,
spin_lock_irqsave(&intf->events_lock, flags);
- spin_lock(&intf->counter_lock);
- intf->events++;
- spin_unlock(&intf->counter_lock);
+ ipmi_inc_stat(intf, events);
- /* Allocate and fill in one message for every user that is getting
- events. */
+ /*
+ * Allocate and fill in one message for every user that is
+ * getting events.
+ */
rcu_read_lock();
list_for_each_entry_rcu(user, &intf->users, link) {
if (!user->gets_events)
@@ -3223,9 +3327,11 @@ static int handle_read_event_rsp(ipmi_smi_t intf,
list_del(&recv_msg->link);
ipmi_free_recv_msg(recv_msg);
}
- /* We couldn't allocate memory for the
- message, so requeue it for handling
- later. */
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling
+ * later.
+ */
rv = 1;
goto out;
}
@@ -3246,13 +3352,17 @@ static int handle_read_event_rsp(ipmi_smi_t intf,
deliver_response(recv_msg);
}
} else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) {
- /* No one to receive the message, put it in queue if there's
- not already too many things in the queue. */
+ /*
+ * No one to receive the message, put it in queue if there's
+ * not already too many things in the queue.
+ */
recv_msg = ipmi_alloc_recv_msg();
if (!recv_msg) {
- /* We couldn't allocate memory for the
- message, so requeue it for handling
- later. */
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling
+ * later.
+ */
rv = 1;
goto out;
}
@@ -3260,11 +3370,14 @@ static int handle_read_event_rsp(ipmi_smi_t intf,
copy_event_into_recv_msg(recv_msg, msg);
list_add_tail(&(recv_msg->link), &(intf->waiting_events));
intf->waiting_events_count++;
- } else {
- /* There's too many things in the queue, discard this
- message. */
- printk(KERN_WARNING PFX "Event queue full, discarding an"
- " incoming event\n");
+ } else if (!intf->event_msg_printed) {
+ /*
+ * There's too many things in the queue, discard this
+ * message.
+ */
+ printk(KERN_WARNING PFX "Event queue full, discarding"
+ " incoming events\n");
+ intf->event_msg_printed = 1;
}
out:
@@ -3277,16 +3390,15 @@ static int handle_bmc_rsp(ipmi_smi_t intf,
struct ipmi_smi_msg *msg)
{
struct ipmi_recv_msg *recv_msg;
- unsigned long flags;
struct ipmi_user *user;
recv_msg = (struct ipmi_recv_msg *) msg->user_data;
- if (recv_msg == NULL)
- {
- printk(KERN_WARNING"IPMI message received with no owner. This\n"
- "could be because of a malformed message, or\n"
- "because of a hardware error. Contact your\n"
- "hardware vender for assistance\n");
+ if (recv_msg == NULL) {
+ printk(KERN_WARNING
+ "IPMI message received with no owner. This\n"
+ "could be because of a malformed message, or\n"
+ "because of a hardware error. Contact your\n"
+ "hardware vender for assistance\n");
return 0;
}
@@ -3294,16 +3406,12 @@ static int handle_bmc_rsp(ipmi_smi_t intf,
/* Make sure the user still exists. */
if (user && !user->valid) {
/* The user for the message went away, so give up. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->unhandled_local_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, unhandled_local_responses);
ipmi_free_recv_msg(recv_msg);
} else {
struct ipmi_system_interface_addr *smi_addr;
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->handled_local_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, handled_local_responses);
recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
recv_msg->msgid = msg->msgid;
smi_addr = ((struct ipmi_system_interface_addr *)
@@ -3324,9 +3432,11 @@ static int handle_bmc_rsp(ipmi_smi_t intf,
return 0;
}
-/* Handle a new message. Return 1 if the message should be requeued,
- 0 if the message should be freed, or -1 if the message should not
- be freed or requeued. */
+/*
+ * Handle a new message. Return 1 if the message should be requeued,
+ * 0 if the message should be freed, or -1 if the message should not
+ * be freed or requeued.
+ */
static int handle_new_recv_msg(ipmi_smi_t intf,
struct ipmi_smi_msg *msg)
{
@@ -3351,10 +3461,12 @@ static int handle_new_recv_msg(ipmi_smi_t intf,
msg->rsp[1] = msg->data[1];
msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
msg->rsp_size = 3;
- } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))/* Netfn */
- || (msg->rsp[1] != msg->data[1])) /* Command */
- {
- /* The response is not even marginally correct. */
+ } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))
+ || (msg->rsp[1] != msg->data[1])) {
+ /*
+ * The NetFN and Command in the response is not even
+ * marginally correct.
+ */
printk(KERN_WARNING PFX "BMC returned incorrect response,"
" expected netfn %x cmd %x, got netfn %x cmd %x\n",
(msg->data[0] >> 2) | 1, msg->data[1],
@@ -3369,10 +3481,11 @@ static int handle_new_recv_msg(ipmi_smi_t intf,
if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
&& (msg->rsp[1] == IPMI_SEND_MSG_CMD)
- && (msg->user_data != NULL))
- {
- /* It's a response to a response we sent. For this we
- deliver a send message response to the user. */
+ && (msg->user_data != NULL)) {
+ /*
+ * It's a response to a response we sent. For this we
+ * deliver a send message response to the user.
+ */
struct ipmi_recv_msg *recv_msg = msg->user_data;
requeue = 0;
@@ -3398,8 +3511,7 @@ static int handle_new_recv_msg(ipmi_smi_t intf,
recv_msg->msg_data[0] = msg->rsp[2];
deliver_response(recv_msg);
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
- && (msg->rsp[1] == IPMI_GET_MSG_CMD))
- {
+ && (msg->rsp[1] == IPMI_GET_MSG_CMD)) {
/* It's from the receive queue. */
chan = msg->rsp[3] & 0xf;
if (chan >= IPMI_MAX_CHANNELS) {
@@ -3411,12 +3523,16 @@ static int handle_new_recv_msg(ipmi_smi_t intf,
switch (intf->channels[chan].medium) {
case IPMI_CHANNEL_MEDIUM_IPMB:
if (msg->rsp[4] & 0x04) {
- /* It's a response, so find the
- requesting message and send it up. */
+ /*
+ * It's a response, so find the
+ * requesting message and send it up.
+ */
requeue = handle_ipmb_get_msg_rsp(intf, msg);
} else {
- /* It's a command to the SMS from some other
- entity. Handle that. */
+ /*
+ * It's a command to the SMS from some other
+ * entity. Handle that.
+ */
requeue = handle_ipmb_get_msg_cmd(intf, msg);
}
break;
@@ -3424,25 +3540,30 @@ static int handle_new_recv_msg(ipmi_smi_t intf,
case IPMI_CHANNEL_MEDIUM_8023LAN:
case IPMI_CHANNEL_MEDIUM_ASYNC:
if (msg->rsp[6] & 0x04) {
- /* It's a response, so find the
- requesting message and send it up. */
+ /*
+ * It's a response, so find the
+ * requesting message and send it up.
+ */
requeue = handle_lan_get_msg_rsp(intf, msg);
} else {
- /* It's a command to the SMS from some other
- entity. Handle that. */
+ /*
+ * It's a command to the SMS from some other
+ * entity. Handle that.
+ */
requeue = handle_lan_get_msg_cmd(intf, msg);
}
break;
default:
- /* We don't handle the channel type, so just
- * free the message. */
+ /*
+ * We don't handle the channel type, so just
+ * free the message.
+ */
requeue = 0;
}
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
- && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD))
- {
+ && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) {
/* It's an asyncronous event. */
requeue = handle_read_event_rsp(intf, msg);
} else {
@@ -3458,71 +3579,82 @@ static int handle_new_recv_msg(ipmi_smi_t intf,
void ipmi_smi_msg_received(ipmi_smi_t intf,
struct ipmi_smi_msg *msg)
{
- unsigned long flags;
+ unsigned long flags = 0; /* keep us warning-free. */
int rv;
+ int run_to_completion;
if ((msg->data_size >= 2)
&& (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2))
&& (msg->data[1] == IPMI_SEND_MSG_CMD)
- && (msg->user_data == NULL))
- {
- /* This is the local response to a command send, start
- the timer for these. The user_data will not be
- NULL if this is a response send, and we will let
- response sends just go through. */
-
- /* Check for errors, if we get certain errors (ones
- that mean basically we can try again later), we
- ignore them and start the timer. Otherwise we
- report the error immediately. */
+ && (msg->user_data == NULL)) {
+ /*
+ * This is the local response to a command send, start
+ * the timer for these. The user_data will not be
+ * NULL if this is a response send, and we will let
+ * response sends just go through.
+ */
+
+ /*
+ * Check for errors, if we get certain errors (ones
+ * that mean basically we can try again later), we
+ * ignore them and start the timer. Otherwise we
+ * report the error immediately.
+ */
if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0)
&& (msg->rsp[2] != IPMI_NODE_BUSY_ERR)
&& (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)
&& (msg->rsp[2] != IPMI_BUS_ERR)
- && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR))
- {
+ && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) {
int chan = msg->rsp[3] & 0xf;
/* Got an error sending the message, handle it. */
- spin_lock_irqsave(&intf->counter_lock, flags);
if (chan >= IPMI_MAX_CHANNELS)
; /* This shouldn't happen */
else if ((intf->channels[chan].medium
== IPMI_CHANNEL_MEDIUM_8023LAN)
|| (intf->channels[chan].medium
== IPMI_CHANNEL_MEDIUM_ASYNC))
- intf->sent_lan_command_errs++;
+ ipmi_inc_stat(intf, sent_lan_command_errs);
else
- intf->sent_ipmb_command_errs++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
+ ipmi_inc_stat(intf, sent_ipmb_command_errs);
intf_err_seq(intf, msg->msgid, msg->rsp[2]);
- } else {
+ } else
/* The message was sent, start the timer. */
intf_start_seq_timer(intf, msg->msgid);
- }
ipmi_free_smi_msg(msg);
goto out;
}
- /* To preserve message order, if the list is not empty, we
- tack this message onto the end of the list. */
- spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
+ /*
+ * To preserve message order, if the list is not empty, we
+ * tack this message onto the end of the list.
+ */
+ run_to_completion = intf->run_to_completion;
+ if (!run_to_completion)
+ spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
if (!list_empty(&intf->waiting_msgs)) {
list_add_tail(&msg->link, &intf->waiting_msgs);
- spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
+ if (!run_to_completion)
+ spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
goto out;
}
- spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
-
+ if (!run_to_completion)
+ spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
+
rv = handle_new_recv_msg(intf, msg);
if (rv > 0) {
- /* Could not handle the message now, just add it to a
- list to handle later. */
- spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
+ /*
+ * Could not handle the message now, just add it to a
+ * list to handle later.
+ */
+ run_to_completion = intf->run_to_completion;
+ if (!run_to_completion)
+ spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
list_add_tail(&msg->link, &intf->waiting_msgs);
- spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
+ if (!run_to_completion)
+ spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
} else if (rv == 0) {
ipmi_free_smi_msg(msg);
}
@@ -3530,6 +3662,7 @@ void ipmi_smi_msg_received(ipmi_smi_t intf,
out:
return;
}
+EXPORT_SYMBOL(ipmi_smi_msg_received);
void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf)
{
@@ -3544,7 +3677,7 @@ void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf)
}
rcu_read_unlock();
}
-
+EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout);
static struct ipmi_smi_msg *
smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg,
@@ -3552,14 +3685,16 @@ smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg,
{
struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg();
if (!smi_msg)
- /* If we can't allocate the message, then just return, we
- get 4 retries, so this should be ok. */
+ /*
+ * If we can't allocate the message, then just return, we
+ * get 4 retries, so this should be ok.
+ */
return NULL;
memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len);
smi_msg->data_size = recv_msg->msg.data_len;
smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid);
-
+
#ifdef DEBUG_MSGING
{
int m;
@@ -3594,28 +3729,26 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
ent->inuse = 0;
msg = ent->recv_msg;
list_add_tail(&msg->link, timeouts);
- spin_lock(&intf->counter_lock);
if (ent->broadcast)
- intf->timed_out_ipmb_broadcasts++;
+ ipmi_inc_stat(intf, timed_out_ipmb_broadcasts);
else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
- intf->timed_out_lan_commands++;
+ ipmi_inc_stat(intf, timed_out_lan_commands);
else
- intf->timed_out_ipmb_commands++;
- spin_unlock(&intf->counter_lock);
+ ipmi_inc_stat(intf, timed_out_ipmb_commands);
} else {
struct ipmi_smi_msg *smi_msg;
/* More retries, send again. */
- /* Start with the max timer, set to normal
- timer after the message is sent. */
+ /*
+ * Start with the max timer, set to normal timer after
+ * the message is sent.
+ */
ent->timeout = MAX_MSG_TIMEOUT;
ent->retries_left--;
- spin_lock(&intf->counter_lock);
if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
- intf->retransmitted_lan_commands++;
+ ipmi_inc_stat(intf, retransmitted_lan_commands);
else
- intf->retransmitted_ipmb_commands++;
- spin_unlock(&intf->counter_lock);
+ ipmi_inc_stat(intf, retransmitted_ipmb_commands);
smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
ent->seqid);
@@ -3624,11 +3757,13 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
spin_unlock_irqrestore(&intf->seq_lock, *flags);
- /* Send the new message. We send with a zero
- * priority. It timed out, I doubt time is
- * that critical now, and high priority
- * messages are really only for messages to the
- * local MC, which don't get resent. */
+ /*
+ * Send the new message. We send with a zero
+ * priority. It timed out, I doubt time is that
+ * critical now, and high priority messages are really
+ * only for messages to the local MC, which don't get
+ * resent.
+ */
handlers = intf->handlers;
if (handlers)
intf->handlers->sender(intf->send_info,
@@ -3659,16 +3794,20 @@ static void ipmi_timeout_handler(long timeout_period)
list_del(&smi_msg->link);
ipmi_free_smi_msg(smi_msg);
} else {
- /* To preserve message order, quit if we
- can't handle a message. */
+ /*
+ * To preserve message order, quit if we
+ * can't handle a message.
+ */
break;
}
}
spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
- /* Go through the seq table and find any messages that
- have timed out, putting them in the timeouts
- list. */
+ /*
+ * Go through the seq table and find any messages that
+ * have timed out, putting them in the timeouts
+ * list.
+ */
INIT_LIST_HEAD(&timeouts);
spin_lock_irqsave(&intf->seq_lock, flags);
for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
@@ -3694,8 +3833,7 @@ static void ipmi_timeout_handler(long timeout_period)
intf->auto_maintenance_timeout
-= timeout_period;
if (!intf->maintenance_mode
- && (intf->auto_maintenance_timeout <= 0))
- {
+ && (intf->auto_maintenance_timeout <= 0)) {
intf->maintenance_mode_enable = 0;
maintenance_mode_update(intf);
}
@@ -3713,8 +3851,10 @@ static void ipmi_request_event(void)
struct ipmi_smi_handlers *handlers;
rcu_read_lock();
- /* Called from the timer, no need to check if handlers is
- * valid. */
+ /*
+ * Called from the timer, no need to check if handlers is
+ * valid.
+ */
list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
/* No event requests when in maintenance mode. */
if (intf->maintenance_mode_enable)
@@ -3735,10 +3875,12 @@ static struct timer_list ipmi_timer;
/* How many jiffies does it take to get to the timeout time. */
#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000)
-/* Request events from the queue every second (this is the number of
- IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the
- future, IPMI will add a way to know immediately if an event is in
- the queue and this silliness can go away. */
+/*
+ * Request events from the queue every second (this is the number of
+ * IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the
+ * future, IPMI will add a way to know immediately if an event is in
+ * the queue and this silliness can go away.
+ */
#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME))
static atomic_t stop_operation;
@@ -3782,6 +3924,7 @@ struct ipmi_smi_msg *ipmi_alloc_smi_msg(void)
}
return rv;
}
+EXPORT_SYMBOL(ipmi_alloc_smi_msg);
static void free_recv_msg(struct ipmi_recv_msg *msg)
{
@@ -3789,7 +3932,7 @@ static void free_recv_msg(struct ipmi_recv_msg *msg)
kfree(msg);
}
-struct ipmi_recv_msg *ipmi_alloc_recv_msg(void)
+static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void)
{
struct ipmi_recv_msg *rv;
@@ -3808,6 +3951,7 @@ void ipmi_free_recv_msg(struct ipmi_recv_msg *msg)
kref_put(&msg->user->refcount, free_user);
msg->done(msg);
}
+EXPORT_SYMBOL(ipmi_free_recv_msg);
#ifdef CONFIG_IPMI_PANIC_EVENT
@@ -3825,8 +3969,7 @@ static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
&& (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE)
&& (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD)
- && (msg->msg.data[0] == IPMI_CC_NO_ERROR))
- {
+ && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) {
/* A get event receiver command, save it. */
intf->event_receiver = msg->msg.data[1];
intf->event_receiver_lun = msg->msg.data[2] & 0x3;
@@ -3838,10 +3981,11 @@ static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
&& (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE)
&& (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD)
- && (msg->msg.data[0] == IPMI_CC_NO_ERROR))
- {
- /* A get device id command, save if we are an event
- receiver or generator. */
+ && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) {
+ /*
+ * A get device id command, save if we are an event
+ * receiver or generator.
+ */
intf->local_sel_device = (msg->msg.data[6] >> 2) & 1;
intf->local_event_generator = (msg->msg.data[6] >> 5) & 1;
}
@@ -3874,8 +4018,10 @@ static void send_panic_events(char *str)
data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */
data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */
- /* Put a few breadcrumbs in. Hopefully later we can add more things
- to make the panic events more useful. */
+ /*
+ * Put a few breadcrumbs in. Hopefully later we can add more things
+ * to make the panic events more useful.
+ */
if (str) {
data[3] = str[0];
data[6] = str[1];
@@ -3891,6 +4037,7 @@ static void send_panic_events(char *str)
/* Interface is not ready. */
continue;
+ intf->run_to_completion = 1;
/* Send the event announcing the panic. */
intf->handlers->set_run_to_completion(intf->send_info, 1);
i_ipmi_request(NULL,
@@ -3908,9 +4055,11 @@ static void send_panic_events(char *str)
}
#ifdef CONFIG_IPMI_PANIC_STRING
- /* On every interface, dump a bunch of OEM event holding the
- string. */
- if (!str)
+ /*
+ * On every interface, dump a bunch of OEM event holding the
+ * string.
+ */
+ if (!str)
return;
/* For every registered interface, send the event. */
@@ -3931,11 +4080,13 @@ static void send_panic_events(char *str)
*/
smp_rmb();
- /* First job here is to figure out where to send the
- OEM events. There's no way in IPMI to send OEM
- events using an event send command, so we have to
- find the SEL to put them in and stick them in
- there. */
+ /*
+ * First job here is to figure out where to send the
+ * OEM events. There's no way in IPMI to send OEM
+ * events using an event send command, so we have to
+ * find the SEL to put them in and stick them in
+ * there.
+ */
/* Get capabilities from the get device id. */
intf->local_sel_device = 0;
@@ -3983,24 +4134,29 @@ static void send_panic_events(char *str)
}
intf->null_user_handler = NULL;
- /* Validate the event receiver. The low bit must not
- be 1 (it must be a valid IPMB address), it cannot
- be zero, and it must not be my address. */
- if (((intf->event_receiver & 1) == 0)
+ /*
+ * Validate the event receiver. The low bit must not
+ * be 1 (it must be a valid IPMB address), it cannot
+ * be zero, and it must not be my address.
+ */
+ if (((intf->event_receiver & 1) == 0)
&& (intf->event_receiver != 0)
- && (intf->event_receiver != intf->channels[0].address))
- {
- /* The event receiver is valid, send an IPMB
- message. */
+ && (intf->event_receiver != intf->channels[0].address)) {
+ /*
+ * The event receiver is valid, send an IPMB
+ * message.
+ */
ipmb = (struct ipmi_ipmb_addr *) &addr;
ipmb->addr_type = IPMI_IPMB_ADDR_TYPE;
ipmb->channel = 0; /* FIXME - is this right? */
ipmb->lun = intf->event_receiver_lun;
ipmb->slave_addr = intf->event_receiver;
} else if (intf->local_sel_device) {
- /* The event receiver was not valid (or was
- me), but I am an SEL device, just dump it
- in my SEL. */
+ /*
+ * The event receiver was not valid (or was
+ * me), but I am an SEL device, just dump it
+ * in my SEL.
+ */
si = (struct ipmi_system_interface_addr *) &addr;
si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
si->channel = IPMI_BMC_CHANNEL;
@@ -4008,7 +4164,6 @@ static void send_panic_events(char *str)
} else
continue; /* No where to send the event. */
-
msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */
msg.cmd = IPMI_ADD_SEL_ENTRY_CMD;
msg.data = data;
@@ -4025,8 +4180,10 @@ static void send_panic_events(char *str)
data[2] = 0xf0; /* OEM event without timestamp. */
data[3] = intf->channels[0].address;
data[4] = j++; /* sequence # */
- /* Always give 11 bytes, so strncpy will fill
- it with zeroes for me. */
+ /*
+ * Always give 11 bytes, so strncpy will fill
+ * it with zeroes for me.
+ */
strncpy(data+5, p, 11);
p += size;
@@ -4043,7 +4200,7 @@ static void send_panic_events(char *str)
intf->channels[0].lun,
0, 1); /* no retry, and no wait. */
}
- }
+ }
#endif /* CONFIG_IPMI_PANIC_STRING */
}
#endif /* CONFIG_IPMI_PANIC_EVENT */
@@ -4052,7 +4209,7 @@ static int has_panicked;
static int panic_event(struct notifier_block *this,
unsigned long event,
- void *ptr)
+ void *ptr)
{
ipmi_smi_t intf;
@@ -4066,6 +4223,7 @@ static int panic_event(struct notifier_block *this,
/* Interface is not ready. */
continue;
+ intf->run_to_completion = 1;
intf->handlers->set_run_to_completion(intf->send_info, 1);
}
@@ -4133,11 +4291,16 @@ static __exit void cleanup_ipmi(void)
atomic_notifier_chain_unregister(&panic_notifier_list, &panic_block);
- /* This can't be called if any interfaces exist, so no worry about
- shutting down the interfaces. */
+ /*
+ * This can't be called if any interfaces exist, so no worry
+ * about shutting down the interfaces.
+ */
- /* Tell the timer to stop, then wait for it to stop. This avoids
- problems with race conditions removing the timer here. */
+ /*
+ * Tell the timer to stop, then wait for it to stop. This
+ * avoids problems with race conditions removing the timer
+ * here.
+ */
atomic_inc(&stop_operation);
del_timer_sync(&ipmi_timer);
@@ -4164,31 +4327,6 @@ module_exit(cleanup_ipmi);
module_init(ipmi_init_msghandler_mod);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
-MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI interface.");
+MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI"
+ " interface.");
MODULE_VERSION(IPMI_DRIVER_VERSION);
-
-EXPORT_SYMBOL(ipmi_create_user);
-EXPORT_SYMBOL(ipmi_destroy_user);
-EXPORT_SYMBOL(ipmi_get_version);
-EXPORT_SYMBOL(ipmi_request_settime);
-EXPORT_SYMBOL(ipmi_request_supply_msgs);
-EXPORT_SYMBOL(ipmi_poll_interface);
-EXPORT_SYMBOL(ipmi_register_smi);
-EXPORT_SYMBOL(ipmi_unregister_smi);
-EXPORT_SYMBOL(ipmi_register_for_cmd);
-EXPORT_SYMBOL(ipmi_unregister_for_cmd);
-EXPORT_SYMBOL(ipmi_smi_msg_received);
-EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout);
-EXPORT_SYMBOL(ipmi_alloc_smi_msg);
-EXPORT_SYMBOL(ipmi_addr_length);
-EXPORT_SYMBOL(ipmi_validate_addr);
-EXPORT_SYMBOL(ipmi_set_gets_events);
-EXPORT_SYMBOL(ipmi_smi_watcher_register);
-EXPORT_SYMBOL(ipmi_smi_watcher_unregister);
-EXPORT_SYMBOL(ipmi_set_my_address);
-EXPORT_SYMBOL(ipmi_get_my_address);
-EXPORT_SYMBOL(ipmi_set_my_LUN);
-EXPORT_SYMBOL(ipmi_get_my_LUN);
-EXPORT_SYMBOL(ipmi_smi_add_proc_entry);
-EXPORT_SYMBOL(ipmi_user_set_run_to_completion);
-EXPORT_SYMBOL(ipmi_free_recv_msg);
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
index b86186de7f0..a261bd735df 100644
--- a/drivers/char/ipmi/ipmi_poweroff.c
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -87,7 +87,10 @@ MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog "
/* parameter definition to allow user to flag power cycle */
module_param(poweroff_powercycle, int, 0644);
-MODULE_PARM_DESC(poweroff_powercycle, " Set to non-zero to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down.");
+MODULE_PARM_DESC(poweroff_powercycle,
+ " Set to non-zero to enable power cycle instead of power"
+ " down. Power cycle is contingent on hardware support,"
+ " otherwise it defaults back to power down.");
/* Stuff from the get device id command. */
static unsigned int mfg_id;
@@ -95,22 +98,25 @@ static unsigned int prod_id;
static unsigned char capabilities;
static unsigned char ipmi_version;
-/* We use our own messages for this operation, we don't let the system
- allocate them, since we may be in a panic situation. The whole
- thing is single-threaded, anyway, so multiple messages are not
- required. */
+/*
+ * We use our own messages for this operation, we don't let the system
+ * allocate them, since we may be in a panic situation. The whole
+ * thing is single-threaded, anyway, so multiple messages are not
+ * required.
+ */
+static atomic_t dummy_count = ATOMIC_INIT(0);
static void dummy_smi_free(struct ipmi_smi_msg *msg)
{
+ atomic_dec(&dummy_count);
}
static void dummy_recv_free(struct ipmi_recv_msg *msg)
{
+ atomic_dec(&dummy_count);
}
-static struct ipmi_smi_msg halt_smi_msg =
-{
+static struct ipmi_smi_msg halt_smi_msg = {
.done = dummy_smi_free
};
-static struct ipmi_recv_msg halt_recv_msg =
-{
+static struct ipmi_recv_msg halt_recv_msg = {
.done = dummy_recv_free
};
@@ -127,8 +133,7 @@ static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
complete(comp);
}
-static struct ipmi_user_hndl ipmi_poweroff_handler =
-{
+static struct ipmi_user_hndl ipmi_poweroff_handler = {
.ipmi_recv_hndl = receive_handler
};
@@ -152,17 +157,28 @@ static int ipmi_request_wait_for_response(ipmi_user_t user,
return halt_recv_msg.msg.data[0];
}
-/* We are in run-to-completion mode, no completion is desired. */
+/* Wait for message to complete, spinning. */
static int ipmi_request_in_rc_mode(ipmi_user_t user,
struct ipmi_addr *addr,
struct kernel_ipmi_msg *send_msg)
{
int rv;
+ atomic_set(&dummy_count, 2);
rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL,
&halt_smi_msg, &halt_recv_msg, 0);
- if (rv)
+ if (rv) {
+ atomic_set(&dummy_count, 0);
return rv;
+ }
+
+ /*
+ * Spin until our message is done.
+ */
+ while (atomic_read(&dummy_count) > 0) {
+ ipmi_poll_interface(user);
+ cpu_relax();
+ }
return halt_recv_msg.msg.data[0];
}
@@ -184,47 +200,47 @@ static int ipmi_request_in_rc_mode(ipmi_user_t user,
static void (*atca_oem_poweroff_hook)(ipmi_user_t user);
-static void pps_poweroff_atca (ipmi_user_t user)
+static void pps_poweroff_atca(ipmi_user_t user)
{
- struct ipmi_system_interface_addr smi_addr;
- struct kernel_ipmi_msg send_msg;
- int rv;
- /*
- * Configure IPMI address for local access
- */
- smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
- smi_addr.channel = IPMI_BMC_CHANNEL;
- smi_addr.lun = 0;
-
- printk(KERN_INFO PFX "PPS powerdown hook used");
-
- send_msg.netfn = IPMI_NETFN_OEM;
- send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART;
- send_msg.data = IPMI_ATCA_PPS_IANA;
- send_msg.data_len = 3;
- rv = ipmi_request_in_rc_mode(user,
- (struct ipmi_addr *) &smi_addr,
- &send_msg);
- if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
- printk(KERN_ERR PFX "Unable to send ATCA ,"
- " IPMI error 0x%x\n", rv);
- }
+ struct ipmi_system_interface_addr smi_addr;
+ struct kernel_ipmi_msg send_msg;
+ int rv;
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
+
+ printk(KERN_INFO PFX "PPS powerdown hook used");
+
+ send_msg.netfn = IPMI_NETFN_OEM;
+ send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART;
+ send_msg.data = IPMI_ATCA_PPS_IANA;
+ send_msg.data_len = 3;
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
+ printk(KERN_ERR PFX "Unable to send ATCA ,"
+ " IPMI error 0x%x\n", rv);
+ }
return;
}
-static int ipmi_atca_detect (ipmi_user_t user)
+static int ipmi_atca_detect(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[1];
- /*
- * Configure IPMI address for local access
- */
- smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
- smi_addr.channel = IPMI_BMC_CHANNEL;
- smi_addr.lun = 0;
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
/*
* Use get address info to check and see if we are ATCA
@@ -238,28 +254,30 @@ static int ipmi_atca_detect (ipmi_user_t user)
(struct ipmi_addr *) &smi_addr,
&send_msg);
- printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", mfg_id, prod_id);
- if((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID)
- && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) {
- printk(KERN_INFO PFX "Installing Pigeon Point Systems Poweroff Hook\n");
+ printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n",
+ mfg_id, prod_id);
+ if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID)
+ && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) {
+ printk(KERN_INFO PFX
+ "Installing Pigeon Point Systems Poweroff Hook\n");
atca_oem_poweroff_hook = pps_poweroff_atca;
}
return !rv;
}
-static void ipmi_poweroff_atca (ipmi_user_t user)
+static void ipmi_poweroff_atca(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[4];
- /*
- * Configure IPMI address for local access
- */
- smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
- smi_addr.channel = IPMI_BMC_CHANNEL;
- smi_addr.lun = 0;
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
printk(KERN_INFO PFX "Powering down via ATCA power command\n");
@@ -273,23 +291,24 @@ static void ipmi_poweroff_atca (ipmi_user_t user)
data[2] = 0; /* Power Level */
data[3] = 0; /* Don't change saved presets */
send_msg.data = data;
- send_msg.data_len = sizeof (data);
+ send_msg.data_len = sizeof(data);
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
- /** At this point, the system may be shutting down, and most
- ** serial drivers (if used) will have interrupts turned off
- ** it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE
- ** return code
- **/
- if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
+ /*
+ * At this point, the system may be shutting down, and most
+ * serial drivers (if used) will have interrupts turned off
+ * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE
+ * return code
+ */
+ if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
printk(KERN_ERR PFX "Unable to send ATCA powerdown message,"
" IPMI error 0x%x\n", rv);
goto out;
}
- if(atca_oem_poweroff_hook)
- return atca_oem_poweroff_hook(user);
+ if (atca_oem_poweroff_hook)
+ atca_oem_poweroff_hook(user);
out:
return;
}
@@ -310,13 +329,13 @@ static void ipmi_poweroff_atca (ipmi_user_t user)
#define IPMI_CPI1_PRODUCT_ID 0x000157
#define IPMI_CPI1_MANUFACTURER_ID 0x0108
-static int ipmi_cpi1_detect (ipmi_user_t user)
+static int ipmi_cpi1_detect(ipmi_user_t user)
{
return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID)
&& (prod_id == IPMI_CPI1_PRODUCT_ID));
}
-static void ipmi_poweroff_cpi1 (ipmi_user_t user)
+static void ipmi_poweroff_cpi1(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct ipmi_ipmb_addr ipmb_addr;
@@ -328,12 +347,12 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user)
unsigned char aer_addr;
unsigned char aer_lun;
- /*
- * Configure IPMI address for local access
- */
- smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
- smi_addr.channel = IPMI_BMC_CHANNEL;
- smi_addr.lun = 0;
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
printk(KERN_INFO PFX "Powering down via CPI1 power command\n");
@@ -425,7 +444,7 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user)
*/
#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
-static int ipmi_dell_chassis_detect (ipmi_user_t user)
+static int ipmi_dell_chassis_detect(ipmi_user_t user)
{
const char ipmi_version_major = ipmi_version & 0xF;
const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
@@ -444,25 +463,25 @@ static int ipmi_dell_chassis_detect (ipmi_user_t user)
#define IPMI_NETFN_CHASSIS_REQUEST 0
#define IPMI_CHASSIS_CONTROL_CMD 0x02
-static int ipmi_chassis_detect (ipmi_user_t user)
+static int ipmi_chassis_detect(ipmi_user_t user)
{
/* Chassis support, use it. */
return (capabilities & 0x80);
}
-static void ipmi_poweroff_chassis (ipmi_user_t user)
+static void ipmi_poweroff_chassis(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[1];
- /*
- * Configure IPMI address for local access
- */
- smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
- smi_addr.channel = IPMI_BMC_CHANNEL;
- smi_addr.lun = 0;
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
powercyclefailed:
printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n",
@@ -525,15 +544,13 @@ static struct poweroff_function poweroff_functions[] = {
/* Called on a powerdown request. */
-static void ipmi_poweroff_function (void)
+static void ipmi_poweroff_function(void)
{
if (!ready)
return;
/* Use run-to-completion mode, since interrupts may be off. */
- ipmi_user_set_run_to_completion(ipmi_user, 1);
specific_poweroff_func(ipmi_user);
- ipmi_user_set_run_to_completion(ipmi_user, 0);
}
/* Wait for an IPMI interface to be installed, the first one installed
@@ -561,13 +578,13 @@ static void ipmi_po_new_smi(int if_num, struct device *device)
ipmi_ifnum = if_num;
- /*
- * Do a get device ide and store some results, since this is
+ /*
+ * Do a get device ide and store some results, since this is
* used by several functions.
- */
- smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
- smi_addr.channel = IPMI_BMC_CHANNEL;
- smi_addr.lun = 0;
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
send_msg.netfn = IPMI_NETFN_APP_REQUEST;
send_msg.cmd = IPMI_GET_DEVICE_ID_CMD;
@@ -632,8 +649,7 @@ static void ipmi_po_smi_gone(int if_num)
pm_power_off = old_poweroff_func;
}
-static struct ipmi_smi_watcher smi_watcher =
-{
+static struct ipmi_smi_watcher smi_watcher = {
.owner = THIS_MODULE,
.new_smi = ipmi_po_new_smi,
.smi_gone = ipmi_po_smi_gone
@@ -675,12 +691,12 @@ static struct ctl_table_header *ipmi_table_header;
/*
* Startup and shutdown functions.
*/
-static int ipmi_poweroff_init (void)
+static int ipmi_poweroff_init(void)
{
int rv;
- printk (KERN_INFO "Copyright (C) 2004 MontaVista Software -"
- " IPMI Powerdown via sys_reboot.\n");
+ printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -"
+ " IPMI Powerdown via sys_reboot.\n");
if (poweroff_powercycle)
printk(KERN_INFO PFX "Power cycle is enabled.\n");
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 4f560d0bb80..5a5455585c1 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -80,7 +80,7 @@
#define SI_USEC_PER_JIFFY (1000000/HZ)
#define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
- short timeout */
+ short timeout */
/* Bit for BMC global enables. */
#define IPMI_BMC_RCV_MSG_INTR 0x01
@@ -114,14 +114,61 @@ static char *si_to_str[] = { "kcs", "smic", "bt" };
#define DEVICE_NAME "ipmi_si"
-static struct device_driver ipmi_driver =
-{
+static struct device_driver ipmi_driver = {
.name = DEVICE_NAME,
.bus = &platform_bus_type
};
-struct smi_info
-{
+
+/*
+ * Indexes into stats[] in smi_info below.
+ */
+enum si_stat_indexes {
+ /*
+ * Number of times the driver requested a timer while an operation
+ * was in progress.
+ */
+ SI_STAT_short_timeouts = 0,
+
+ /*
+ * Number of times the driver requested a timer while nothing was in
+ * progress.
+ */
+ SI_STAT_long_timeouts,
+
+ /* Number of times the interface was idle while being polled. */
+ SI_STAT_idles,
+
+ /* Number of interrupts the driver handled. */
+ SI_STAT_interrupts,
+
+ /* Number of time the driver got an ATTN from the hardware. */
+ SI_STAT_attentions,
+
+ /* Number of times the driver requested flags from the hardware. */
+ SI_STAT_flag_fetches,
+
+ /* Number of times the hardware didn't follow the state machine. */
+ SI_STAT_hosed_count,
+
+ /* Number of completed messages. */
+ SI_STAT_complete_transactions,
+
+ /* Number of IPMI events received from the hardware. */
+ SI_STAT_events,
+
+ /* Number of watchdog pretimeouts. */
+ SI_STAT_watchdog_pretimeouts,
+
+ /* Number of asyncronous messages received. */
+ SI_STAT_incoming_messages,
+
+
+ /* This *must* remain last, add new values above this. */
+ SI_NUM_STATS
+};
+
+struct smi_info {
int intf_num;
ipmi_smi_t intf;
struct si_sm_data *si_sm;
@@ -134,8 +181,10 @@ struct smi_info
struct ipmi_smi_msg *curr_msg;
enum si_intf_state si_state;
- /* Used to handle the various types of I/O that can occur with
- IPMI */
+ /*
+ * Used to handle the various types of I/O that can occur with
+ * IPMI
+ */
struct si_sm_io io;
int (*io_setup)(struct smi_info *info);
void (*io_cleanup)(struct smi_info *info);
@@ -146,15 +195,18 @@ struct smi_info
void (*addr_source_cleanup)(struct smi_info *info);
void *addr_source_data;
- /* Per-OEM handler, called from handle_flags().
- Returns 1 when handle_flags() needs to be re-run
- or 0 indicating it set si_state itself.
- */
+ /*
+ * Per-OEM handler, called from handle_flags(). Returns 1
+ * when handle_flags() needs to be re-run or 0 indicating it
+ * set si_state itself.
+ */
int (*oem_data_avail_handler)(struct smi_info *smi_info);
- /* Flags from the last GET_MSG_FLAGS command, used when an ATTN
- is set to hold the flags until we are done handling everything
- from the flags. */
+ /*
+ * Flags from the last GET_MSG_FLAGS command, used when an ATTN
+ * is set to hold the flags until we are done handling everything
+ * from the flags.
+ */
#define RECEIVE_MSG_AVAIL 0x01
#define EVENT_MSG_BUFFER_FULL 0x02
#define WDT_PRE_TIMEOUT_INT 0x08
@@ -162,25 +214,31 @@ struct smi_info
#define OEM1_DATA_AVAIL 0x40
#define OEM2_DATA_AVAIL 0x80
#define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \
- OEM1_DATA_AVAIL | \
- OEM2_DATA_AVAIL)
+ OEM1_DATA_AVAIL | \
+ OEM2_DATA_AVAIL)
unsigned char msg_flags;
- /* If set to true, this will request events the next time the
- state machine is idle. */
+ /*
+ * If set to true, this will request events the next time the
+ * state machine is idle.
+ */
atomic_t req_events;
- /* If true, run the state machine to completion on every send
- call. Generally used after a panic to make sure stuff goes
- out. */
+ /*
+ * If true, run the state machine to completion on every send
+ * call. Generally used after a panic to make sure stuff goes
+ * out.
+ */
int run_to_completion;
/* The I/O port of an SI interface. */
int port;
- /* The space between start addresses of the two ports. For
- instance, if the first port is 0xca2 and the spacing is 4, then
- the second port is 0xca6. */
+ /*
+ * The space between start addresses of the two ports. For
+ * instance, if the first port is 0xca2 and the spacing is 4, then
+ * the second port is 0xca6.
+ */
unsigned int spacing;
/* zero if no irq; */
@@ -195,10 +253,12 @@ struct smi_info
/* Used to gracefully stop the timer without race conditions. */
atomic_t stop_operation;
- /* The driver will disable interrupts when it gets into a
- situation where it cannot handle messages due to lack of
- memory. Once that situation clears up, it will re-enable
- interrupts. */
+ /*
+ * The driver will disable interrupts when it gets into a
+ * situation where it cannot handle messages due to lack of
+ * memory. Once that situation clears up, it will re-enable
+ * interrupts.
+ */
int interrupt_disabled;
/* From the get device id response... */
@@ -208,33 +268,28 @@ struct smi_info
struct device *dev;
struct platform_device *pdev;
- /* True if we allocated the device, false if it came from
- * someplace else (like PCI). */
+ /*
+ * True if we allocated the device, false if it came from
+ * someplace else (like PCI).
+ */
int dev_registered;
/* Slave address, could be reported from DMI. */
unsigned char slave_addr;
/* Counters and things for the proc filesystem. */
- spinlock_t count_lock;
- unsigned long short_timeouts;
- unsigned long long_timeouts;
- unsigned long timeout_restarts;
- unsigned long idles;
- unsigned long interrupts;
- unsigned long attentions;
- unsigned long flag_fetches;
- unsigned long hosed_count;
- unsigned long complete_transactions;
- unsigned long events;
- unsigned long watchdog_pretimeouts;
- unsigned long incoming_messages;
-
- struct task_struct *thread;
+ atomic_t stats[SI_NUM_STATS];
+
+ struct task_struct *thread;
struct list_head link;
};
+#define smi_inc_stat(smi, stat) \
+ atomic_inc(&(smi)->stats[SI_STAT_ ## stat])
+#define smi_get_stat(smi, stat) \
+ ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
+
#define SI_MAX_PARMS 4
static int force_kipmid[SI_MAX_PARMS];
@@ -246,7 +301,7 @@ static int try_smi_init(struct smi_info *smi);
static void cleanup_one_si(struct smi_info *to_clean);
static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
-static int register_xaction_notifier(struct notifier_block * nb)
+static int register_xaction_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_register(&xaction_notifier_list, nb);
}
@@ -255,7 +310,7 @@ static void deliver_recv_msg(struct smi_info *smi_info,
struct ipmi_smi_msg *msg)
{
/* Deliver the message to the upper layer with the lock
- released. */
+ released. */
spin_unlock(&(smi_info->si_lock));
ipmi_smi_msg_received(smi_info->intf, msg);
spin_lock(&(smi_info->si_lock));
@@ -287,9 +342,12 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
struct timeval t;
#endif
- /* No need to save flags, we aleady have interrupts off and we
- already hold the SMI lock. */
- spin_lock(&(smi_info->msg_lock));
+ /*
+ * No need to save flags, we aleady have interrupts off and we
+ * already hold the SMI lock.
+ */
+ if (!smi_info->run_to_completion)
+ spin_lock(&(smi_info->msg_lock));
/* Pick the high priority queue first. */
if (!list_empty(&(smi_info->hp_xmit_msgs))) {
@@ -310,7 +368,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
link);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
err = atomic_notifier_call_chain(&xaction_notifier_list,
0, smi_info);
@@ -322,14 +380,14 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
smi_info->si_sm,
smi_info->curr_msg->data,
smi_info->curr_msg->data_size);
- if (err) {
+ if (err)
return_hosed_msg(smi_info, err);
- }
rv = SI_SM_CALL_WITHOUT_DELAY;
}
- out:
- spin_unlock(&(smi_info->msg_lock));
+ out:
+ if (!smi_info->run_to_completion)
+ spin_unlock(&(smi_info->msg_lock));
return rv;
}
@@ -338,8 +396,10 @@ static void start_enable_irq(struct smi_info *smi_info)
{
unsigned char msg[2];
- /* If we are enabling interrupts, we have to tell the
- BMC to use them. */
+ /*
+ * If we are enabling interrupts, we have to tell the
+ * BMC to use them.
+ */
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
@@ -371,10 +431,12 @@ static void start_clear_flags(struct smi_info *smi_info)
smi_info->si_state = SI_CLEARING_FLAGS;
}
-/* When we have a situtaion where we run out of memory and cannot
- allocate messages, we just leave them in the BMC and run the system
- polled until we can allocate some memory. Once we have some
- memory, we will re-enable the interrupt. */
+/*
+ * When we have a situtaion where we run out of memory and cannot
+ * allocate messages, we just leave them in the BMC and run the system
+ * polled until we can allocate some memory. Once we have some
+ * memory, we will re-enable the interrupt.
+ */
static inline void disable_si_irq(struct smi_info *smi_info)
{
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
@@ -396,9 +458,7 @@ static void handle_flags(struct smi_info *smi_info)
retry:
if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
/* Watchdog pre-timeout */
- spin_lock(&smi_info->count_lock);
- smi_info->watchdog_pretimeouts++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, watchdog_pretimeouts);
start_clear_flags(smi_info);
smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
@@ -444,12 +504,11 @@ static void handle_flags(struct smi_info *smi_info)
smi_info->curr_msg->data_size);
smi_info->si_state = SI_GETTING_EVENTS;
} else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
- smi_info->oem_data_avail_handler) {
+ smi_info->oem_data_avail_handler) {
if (smi_info->oem_data_avail_handler(smi_info))
goto retry;
- } else {
+ } else
smi_info->si_state = SI_NORMAL;
- }
}
static void handle_transaction_done(struct smi_info *smi_info)
@@ -459,7 +518,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
struct timeval t;
do_gettimeofday(&t);
- printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
switch (smi_info->si_state) {
case SI_NORMAL:
@@ -472,9 +531,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
deliver_recv_msg(smi_info, msg);
@@ -488,12 +549,13 @@ static void handle_transaction_done(struct smi_info *smi_info)
/* We got the flags from the SMI, now handle them. */
len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- /* Error fetching flags, just give up for
- now. */
+ /* Error fetching flags, just give up for now. */
smi_info->si_state = SI_NORMAL;
} else if (len < 4) {
- /* Hmm, no flags. That's technically illegal, but
- don't use uninitialized data. */
+ /*
+ * Hmm, no flags. That's technically illegal, but
+ * don't use uninitialized data.
+ */
smi_info->si_state = SI_NORMAL;
} else {
smi_info->msg_flags = msg[3];
@@ -530,9 +592,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
@@ -543,14 +607,14 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
handle_flags(smi_info);
} else {
- spin_lock(&smi_info->count_lock);
- smi_info->events++;
- spin_unlock(&smi_info->count_lock);
-
- /* Do this before we deliver the message
- because delivering the message releases the
- lock and something else can mess with the
- state. */
+ smi_inc_stat(smi_info, events);
+
+ /*
+ * Do this before we deliver the message
+ * because delivering the message releases the
+ * lock and something else can mess with the
+ * state.
+ */
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
@@ -566,9 +630,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
@@ -579,14 +645,14 @@ static void handle_transaction_done(struct smi_info *smi_info)
smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
handle_flags(smi_info);
} else {
- spin_lock(&smi_info->count_lock);
- smi_info->incoming_messages++;
- spin_unlock(&smi_info->count_lock);
-
- /* Do this before we deliver the message
- because delivering the message releases the
- lock and something else can mess with the
- state. */
+ smi_inc_stat(smi_info, incoming_messages);
+
+ /*
+ * Do this before we deliver the message
+ * because delivering the message releases the
+ * lock and something else can mess with the
+ * state.
+ */
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
@@ -674,69 +740,70 @@ static void handle_transaction_done(struct smi_info *smi_info)
}
}
-/* Called on timeouts and events. Timeouts should pass the elapsed
- time, interrupts should pass in zero. Must be called with
- si_lock held and interrupts disabled. */
+/*
+ * Called on timeouts and events. Timeouts should pass the elapsed
+ * time, interrupts should pass in zero. Must be called with
+ * si_lock held and interrupts disabled.
+ */
static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
int time)
{
enum si_sm_result si_sm_result;
restart:
- /* There used to be a loop here that waited a little while
- (around 25us) before giving up. That turned out to be
- pointless, the minimum delays I was seeing were in the 300us
- range, which is far too long to wait in an interrupt. So
- we just run until the state machine tells us something
- happened or it needs a delay. */
+ /*
+ * There used to be a loop here that waited a little while
+ * (around 25us) before giving up. That turned out to be
+ * pointless, the minimum delays I was seeing were in the 300us
+ * range, which is far too long to wait in an interrupt. So
+ * we just run until the state machine tells us something
+ * happened or it needs a delay.
+ */
si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
time = 0;
while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
- {
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
- }
- if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
- {
- spin_lock(&smi_info->count_lock);
- smi_info->complete_transactions++;
- spin_unlock(&smi_info->count_lock);
+ if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) {
+ smi_inc_stat(smi_info, complete_transactions);
handle_transaction_done(smi_info);
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
- }
- else if (si_sm_result == SI_SM_HOSED)
- {
- spin_lock(&smi_info->count_lock);
- smi_info->hosed_count++;
- spin_unlock(&smi_info->count_lock);
+ } else if (si_sm_result == SI_SM_HOSED) {
+ smi_inc_stat(smi_info, hosed_count);
- /* Do the before return_hosed_msg, because that
- releases the lock. */
+ /*
+ * Do the before return_hosed_msg, because that
+ * releases the lock.
+ */
smi_info->si_state = SI_NORMAL;
if (smi_info->curr_msg != NULL) {
- /* If we were handling a user message, format
- a response to send to the upper layer to
- tell it about the error. */
+ /*
+ * If we were handling a user message, format
+ * a response to send to the upper layer to
+ * tell it about the error.
+ */
return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
}
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
}
- /* We prefer handling attn over new messages. */
- if (si_sm_result == SI_SM_ATTN)
- {
+ /*
+ * We prefer handling attn over new messages. But don't do
+ * this if there is not yet an upper layer to handle anything.
+ */
+ if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) {
unsigned char msg[2];
- spin_lock(&smi_info->count_lock);
- smi_info->attentions++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, attentions);
- /* Got a attn, send down a get message flags to see
- what's causing it. It would be better to handle
- this in the upper layer, but due to the way
- interrupts work with the SMI, that's not really
- possible. */
+ /*
+ * Got a attn, send down a get message flags to see
+ * what's causing it. It would be better to handle
+ * this in the upper layer, but due to the way
+ * interrupts work with the SMI, that's not really
+ * possible.
+ */
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_MSG_FLAGS_CMD;
@@ -748,20 +815,19 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
/* If we are currently idle, try to start the next message. */
if (si_sm_result == SI_SM_IDLE) {
- spin_lock(&smi_info->count_lock);
- smi_info->idles++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, idles);
si_sm_result = start_next_msg(smi_info);
if (si_sm_result != SI_SM_IDLE)
goto restart;
- }
+ }
if ((si_sm_result == SI_SM_IDLE)
- && (atomic_read(&smi_info->req_events)))
- {
- /* We are idle and the upper layer requested that I fetch
- events, so do so. */
+ && (atomic_read(&smi_info->req_events))) {
+ /*
+ * We are idle and the upper layer requested that I fetch
+ * events, so do so.
+ */
atomic_set(&smi_info->req_events, 0);
smi_info->curr_msg = ipmi_alloc_smi_msg();
@@ -803,56 +869,50 @@ static void sender(void *send_info,
return;
}
- spin_lock_irqsave(&(smi_info->msg_lock), flags);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
if (smi_info->run_to_completion) {
- /* If we are running to completion, then throw it in
- the list and run transactions until everything is
- clear. Priority doesn't matter here. */
+ /*
+ * If we are running to completion, then throw it in
+ * the list and run transactions until everything is
+ * clear. Priority doesn't matter here.
+ */
+
+ /*
+ * Run to completion means we are single-threaded, no
+ * need for locks.
+ */
list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
- /* We have to release the msg lock and claim the smi
- lock in this case, because of race conditions. */
- spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
-
- spin_lock_irqsave(&(smi_info->si_lock), flags);
result = smi_event_handler(smi_info, 0);
while (result != SI_SM_IDLE) {
udelay(SI_SHORT_TIMEOUT_USEC);
result = smi_event_handler(smi_info,
SI_SHORT_TIMEOUT_USEC);
}
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
return;
- } else {
- if (priority > 0) {
- list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs));
- } else {
- list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
- }
}
- spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
- spin_lock_irqsave(&(smi_info->si_lock), flags);
- if ((smi_info->si_state == SI_NORMAL)
- && (smi_info->curr_msg == NULL))
- {
+ spin_lock_irqsave(&smi_info->msg_lock, flags);
+ if (priority > 0)
+ list_add_tail(&msg->link, &smi_info->hp_xmit_msgs);
+ else
+ list_add_tail(&msg->link, &smi_info->xmit_msgs);
+ spin_unlock_irqrestore(&smi_info->msg_lock, flags);
+
+ spin_lock_irqsave(&smi_info->si_lock, flags);
+ if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL)
start_next_msg(smi_info);
- }
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+ spin_unlock_irqrestore(&smi_info->si_lock, flags);
}
static void set_run_to_completion(void *send_info, int i_run_to_completion)
{
struct smi_info *smi_info = send_info;
enum si_sm_result result;
- unsigned long flags;
-
- spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_info->run_to_completion = i_run_to_completion;
if (i_run_to_completion) {
@@ -863,8 +923,6 @@ static void set_run_to_completion(void *send_info, int i_run_to_completion)
SI_SHORT_TIMEOUT_USEC);
}
}
-
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
}
static int ipmi_thread(void *data)
@@ -878,9 +936,8 @@ static int ipmi_thread(void *data)
spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_result = smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
- if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
- /* do nothing */
- }
+ if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
+ ; /* do nothing */
else if (smi_result == SI_SM_CALL_WITH_DELAY)
schedule();
else
@@ -931,7 +988,7 @@ static void smi_timeout(unsigned long data)
spin_lock_irqsave(&(smi_info->si_lock), flags);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
jiffies_now = jiffies;
time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
@@ -945,23 +1002,19 @@ static void smi_timeout(unsigned long data)
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
/* Running with interrupts, only do long timeouts. */
smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->long_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
+ smi_inc_stat(smi_info, long_timeouts);
goto do_add_timer;
}
- /* If the state machine asks for a short delay, then shorten
- the timer timeout. */
+ /*
+ * If the state machine asks for a short delay, then shorten
+ * the timer timeout.
+ */
if (smi_result == SI_SM_CALL_WITH_DELAY) {
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->short_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
+ smi_inc_stat(smi_info, short_timeouts);
smi_info->si_timer.expires = jiffies + 1;
} else {
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->long_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
+ smi_inc_stat(smi_info, long_timeouts);
smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
}
@@ -979,13 +1032,11 @@ static irqreturn_t si_irq_handler(int irq, void *data)
spin_lock_irqsave(&(smi_info->si_lock), flags);
- spin_lock(&smi_info->count_lock);
- smi_info->interrupts++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, interrupts);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
@@ -1028,7 +1079,7 @@ static int smi_start_processing(void *send_info,
* The BT interface is efficient enough to not need a thread,
* and there is no need for a thread if we have interrupts.
*/
- else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
+ else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
enable = 1;
if (enable) {
@@ -1054,8 +1105,7 @@ static void set_maintenance_mode(void *send_info, int enable)
atomic_set(&smi_info->req_events, 0);
}
-static struct ipmi_smi_handlers handlers =
-{
+static struct ipmi_smi_handlers handlers = {
.owner = THIS_MODULE,
.start_processing = smi_start_processing,
.sender = sender,
@@ -1065,8 +1115,10 @@ static struct ipmi_smi_handlers handlers =
.poll = poll,
};
-/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
- a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */
+/*
+ * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
+ * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS.
+ */
static LIST_HEAD(smi_infos);
static DEFINE_MUTEX(smi_infos_lock);
@@ -1257,10 +1309,9 @@ static void port_cleanup(struct smi_info *info)
int idx;
if (addr) {
- for (idx = 0; idx < info->io_size; idx++) {
+ for (idx = 0; idx < info->io_size; idx++)
release_region(addr + idx * info->io.regspacing,
info->io.regsize);
- }
}
}
@@ -1274,8 +1325,10 @@ static int port_setup(struct smi_info *info)
info->io_cleanup = port_cleanup;
- /* Figure out the actual inb/inw/inl/etc routine to use based
- upon the register size. */
+ /*
+ * Figure out the actual inb/inw/inl/etc routine to use based
+ * upon the register size.
+ */
switch (info->io.regsize) {
case 1:
info->io.inputb = port_inb;
@@ -1290,17 +1343,18 @@ static int port_setup(struct smi_info *info)
info->io.outputb = port_outl;
break;
default:
- printk("ipmi_si: Invalid register size: %d\n",
+ printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
info->io.regsize);
return -EINVAL;
}
- /* Some BIOSes reserve disjoint I/O regions in their ACPI
+ /*
+ * Some BIOSes reserve disjoint I/O regions in their ACPI
* tables. This causes problems when trying to register the
* entire I/O region. Therefore we must register each I/O
* port separately.
*/
- for (idx = 0; idx < info->io_size; idx++) {
+ for (idx = 0; idx < info->io_size; idx++) {
if (request_region(addr + idx * info->io.regspacing,
info->io.regsize, DEVICE_NAME) == NULL) {
/* Undo allocations */
@@ -1388,8 +1442,10 @@ static int mem_setup(struct smi_info *info)
info->io_cleanup = mem_cleanup;
- /* Figure out the actual readb/readw/readl/etc routine to use based
- upon the register size. */
+ /*
+ * Figure out the actual readb/readw/readl/etc routine to use based
+ * upon the register size.
+ */
switch (info->io.regsize) {
case 1:
info->io.inputb = intf_mem_inb;
@@ -1410,16 +1466,18 @@ static int mem_setup(struct smi_info *info)
break;
#endif
default:
- printk("ipmi_si: Invalid register size: %d\n",
+ printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
info->io.regsize);
return -EINVAL;
}
- /* Calculate the total amount of memory to claim. This is an
+ /*
+ * Calculate the total amount of memory to claim. This is an
* unusual looking calculation, but it avoids claiming any
* more memory than it has to. It will claim everything
* between the first address to the end of the last full
- * register. */
+ * register.
+ */
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
@@ -1749,9 +1807,11 @@ static __devinit void hardcode_find_bmc(void)
#include <linux/acpi.h>
-/* Once we get an ACPI failure, we don't try any more, because we go
- through the tables sequentially. Once we don't find a table, there
- are no more. */
+/*
+ * Once we get an ACPI failure, we don't try any more, because we go
+ * through the tables sequentially. Once we don't find a table, there
+ * are no more.
+ */
static int acpi_failure;
/* For GPE-type interrupts. */
@@ -1765,9 +1825,7 @@ static u32 ipmi_acpi_gpe(void *context)
spin_lock_irqsave(&(smi_info->si_lock), flags);
- spin_lock(&smi_info->count_lock);
- smi_info->interrupts++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, interrupts);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
@@ -1816,7 +1874,8 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
/*
* Defined at
- * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
+ * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
+ * Docs/TechPapers/IA64/hpspmi.pdf
*/
struct SPMITable {
s8 Signature[4];
@@ -1838,14 +1897,18 @@ struct SPMITable {
*/
u8 InterruptType;
- /* If bit 0 of InterruptType is set, then this is the SCI
- interrupt in the GPEx_STS register. */
+ /*
+ * If bit 0 of InterruptType is set, then this is the SCI
+ * interrupt in the GPEx_STS register.
+ */
u8 GPE;
s16 Reserved;
- /* If bit 1 of InterruptType is set, then this is the I/O
- APIC/SAPIC interrupt. */
+ /*
+ * If bit 1 of InterruptType is set, then this is the I/O
+ * APIC/SAPIC interrupt.
+ */
u32 GlobalSystemInterrupt;
/* The actual register address. */
@@ -1863,7 +1926,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
if (spmi->IPMIlegacy != 1) {
printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
- return -ENODEV;
+ return -ENODEV;
}
if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
@@ -1880,8 +1943,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
info->addr_source = "ACPI";
/* Figure out the interface type. */
- switch (spmi->InterfaceType)
- {
+ switch (spmi->InterfaceType) {
case 1: /* KCS */
info->si_type = SI_KCS;
break;
@@ -1929,7 +1991,8 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
kfree(info);
- printk("ipmi_si: Unknown ACPI I/O Address type\n");
+ printk(KERN_WARNING
+ "ipmi_si: Unknown ACPI I/O Address type\n");
return -EIO;
}
info->io.addr_data = spmi->addr.address;
@@ -1963,8 +2026,7 @@ static __devinit void acpi_find_bmc(void)
#endif
#ifdef CONFIG_DMI
-struct dmi_ipmi_data
-{
+struct dmi_ipmi_data {
u8 type;
u8 addr_space;
unsigned long base_addr;
@@ -1989,11 +2051,10 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
/* I/O */
base_addr &= 0xFFFE;
dmi->addr_space = IPMI_IO_ADDR_SPACE;
- }
- else {
+ } else
/* Memory */
dmi->addr_space = IPMI_MEM_ADDR_SPACE;
- }
+
/* If bit 4 of byte 0x10 is set, then the lsb for the address
is odd. */
dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
@@ -2002,7 +2063,7 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
/* The top two bits of byte 0x10 hold the register spacing. */
reg_spacing = (data[0x10] & 0xC0) >> 6;
- switch(reg_spacing){
+ switch (reg_spacing) {
case 0x00: /* Byte boundaries */
dmi->offset = 1;
break;
@@ -2018,12 +2079,14 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
}
} else {
/* Old DMI spec. */
- /* Note that technically, the lower bit of the base
+ /*
+ * Note that technically, the lower bit of the base
* address should be 1 if the address is I/O and 0 if
* the address is in memory. So many systems get that
* wrong (and all that I have seen are I/O) so we just
* ignore that bit and assume I/O. Systems that use
- * memory should use the newer spec, anyway. */
+ * memory should use the newer spec, anyway.
+ */
dmi->base_addr = base_addr & 0xfffe;
dmi->addr_space = IPMI_IO_ADDR_SPACE;
dmi->offset = 1;
@@ -2230,13 +2293,13 @@ static struct pci_device_id ipmi_pci_devices[] = {
MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
static struct pci_driver ipmi_pci_driver = {
- .name = DEVICE_NAME,
- .id_table = ipmi_pci_devices,
- .probe = ipmi_pci_probe,
- .remove = __devexit_p(ipmi_pci_remove),
+ .name = DEVICE_NAME,
+ .id_table = ipmi_pci_devices,
+ .probe = ipmi_pci_probe,
+ .remove = __devexit_p(ipmi_pci_remove),
#ifdef CONFIG_PM
- .suspend = ipmi_pci_suspend,
- .resume = ipmi_pci_resume,
+ .suspend = ipmi_pci_suspend,
+ .resume = ipmi_pci_resume,
#endif
};
#endif /* CONFIG_PCI */
@@ -2306,7 +2369,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev,
info->io.addr_data, info->io.regsize, info->io.regspacing,
info->irq);
- dev->dev.driver_data = (void*) info;
+ dev->dev.driver_data = (void *) info;
return try_smi_init(info);
}
@@ -2319,14 +2382,16 @@ static int __devexit ipmi_of_remove(struct of_device *dev)
static struct of_device_id ipmi_match[] =
{
- { .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS },
- { .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC },
- { .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT },
+ { .type = "ipmi", .compatible = "ipmi-kcs",
+ .data = (void *)(unsigned long) SI_KCS },
+ { .type = "ipmi", .compatible = "ipmi-smic",
+ .data = (void *)(unsigned long) SI_SMIC },
+ { .type = "ipmi", .compatible = "ipmi-bt",
+ .data = (void *)(unsigned long) SI_BT },
{},
};
-static struct of_platform_driver ipmi_of_platform_driver =
-{
+static struct of_platform_driver ipmi_of_platform_driver = {
.name = "ipmi",
.match_table = ipmi_match,
.probe = ipmi_of_probe,
@@ -2347,32 +2412,32 @@ static int try_get_dev_id(struct smi_info *smi_info)
if (!resp)
return -ENOMEM;
- /* Do a Get Device ID command, since it comes back with some
- useful info. */
+ /*
+ * Do a Get Device ID command, since it comes back with some
+ * useful info.
+ */
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_GET_DEVICE_ID_CMD;
smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
- for (;;)
- {
+ for (;;) {
if (smi_result == SI_SM_CALL_WITH_DELAY ||
smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
schedule_timeout_uninterruptible(1);
smi_result = smi_info->handlers->event(
smi_info->si_sm, 100);
- }
- else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
- {
+ } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
smi_result = smi_info->handlers->event(
smi_info->si_sm, 0);
- }
- else
+ } else
break;
}
if (smi_result == SI_SM_HOSED) {
- /* We couldn't get the state machine to run, so whatever's at
- the port is probably not an IPMI SMI interface. */
+ /*
+ * We couldn't get the state machine to run, so whatever's at
+ * the port is probably not an IPMI SMI interface.
+ */
rv = -ENODEV;
goto out;
}
@@ -2405,30 +2470,28 @@ static int stat_file_read_proc(char *page, char **start, off_t off,
out += sprintf(out, "interrupts_enabled: %d\n",
smi->irq && !smi->interrupt_disabled);
- out += sprintf(out, "short_timeouts: %ld\n",
- smi->short_timeouts);
- out += sprintf(out, "long_timeouts: %ld\n",
- smi->long_timeouts);
- out += sprintf(out, "timeout_restarts: %ld\n",
- smi->timeout_restarts);
- out += sprintf(out, "idles: %ld\n",
- smi->idles);
- out += sprintf(out, "interrupts: %ld\n",
- smi->interrupts);
- out += sprintf(out, "attentions: %ld\n",
- smi->attentions);
- out += sprintf(out, "flag_fetches: %ld\n",
- smi->flag_fetches);
- out += sprintf(out, "hosed_count: %ld\n",
- smi->hosed_count);
- out += sprintf(out, "complete_transactions: %ld\n",
- smi->complete_transactions);
- out += sprintf(out, "events: %ld\n",
- smi->events);
- out += sprintf(out, "watchdog_pretimeouts: %ld\n",
- smi->watchdog_pretimeouts);
- out += sprintf(out, "incoming_messages: %ld\n",
- smi->incoming_messages);
+ out += sprintf(out, "short_timeouts: %u\n",
+ smi_get_stat(smi, short_timeouts));
+ out += sprintf(out, "long_timeouts: %u\n",
+ smi_get_stat(smi, long_timeouts));
+ out += sprintf(out, "idles: %u\n",
+ smi_get_stat(smi, idles));
+ out += sprintf(out, "interrupts: %u\n",
+ smi_get_stat(smi, interrupts));
+ out += sprintf(out, "attentions: %u\n",
+ smi_get_stat(smi, attentions));
+ out += sprintf(out, "flag_fetches: %u\n",
+ smi_get_stat(smi, flag_fetches));
+ out += sprintf(out, "hosed_count: %u\n",
+ smi_get_stat(smi, hosed_count));
+ out += sprintf(out, "complete_transactions: %u\n",
+ smi_get_stat(smi, complete_transactions));
+ out += sprintf(out, "events: %u\n",
+ smi_get_stat(smi, events));
+ out += sprintf(out, "watchdog_pretimeouts: %u\n",
+ smi_get_stat(smi, watchdog_pretimeouts));
+ out += sprintf(out, "incoming_messages: %u\n",
+ smi_get_stat(smi, incoming_messages));
return out - page;
}
@@ -2460,7 +2523,7 @@ static int param_read_proc(char *page, char **start, off_t off,
static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
{
smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
- RECEIVE_MSG_AVAIL);
+ RECEIVE_MSG_AVAIL);
return 1;
}
@@ -2502,10 +2565,9 @@ static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
smi_info->oem_data_avail_handler =
oem_data_avail_to_receive_msg_avail;
- }
- else if (ipmi_version_major(id) < 1 ||
- (ipmi_version_major(id) == 1 &&
- ipmi_version_minor(id) < 5)) {
+ } else if (ipmi_version_major(id) < 1 ||
+ (ipmi_version_major(id) == 1 &&
+ ipmi_version_minor(id) < 5)) {
smi_info->oem_data_avail_handler =
oem_data_avail_to_receive_msg_avail;
}
@@ -2597,8 +2659,10 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
if (smi_info->intf) {
- /* The timer and thread are only running if the
- interface has been started up and registered. */
+ /*
+ * The timer and thread are only running if the
+ * interface has been started up and registered.
+ */
if (smi_info->thread != NULL)
kthread_stop(smi_info->thread);
del_timer_sync(&smi_info->si_timer);
@@ -2676,6 +2740,7 @@ static int is_new_interface(struct smi_info *info)
static int try_smi_init(struct smi_info *new_smi)
{
int rv;
+ int i;
if (new_smi->addr_source) {
printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
@@ -2722,7 +2787,7 @@ static int try_smi_init(struct smi_info *new_smi)
/* Allocate the state machine's data and initialize it. */
new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
if (!new_smi->si_sm) {
- printk(" Could not allocate state machine memory\n");
+ printk(KERN_ERR "Could not allocate state machine memory\n");
rv = -ENOMEM;
goto out_err;
}
@@ -2732,13 +2797,12 @@ static int try_smi_init(struct smi_info *new_smi)
/* Now that we know the I/O size, we can set up the I/O. */
rv = new_smi->io_setup(new_smi);
if (rv) {
- printk(" Could not set up I/O space\n");
+ printk(KERN_ERR "Could not set up I/O space\n");
goto out_err;
}
spin_lock_init(&(new_smi->si_lock));
spin_lock_init(&(new_smi->msg_lock));
- spin_lock_init(&(new_smi->count_lock));
/* Do low-level detection first. */
if (new_smi->handlers->detect(new_smi->si_sm)) {
@@ -2749,8 +2813,10 @@ static int try_smi_init(struct smi_info *new_smi)
goto out_err;
}
- /* Attempt a get device id command. If it fails, we probably
- don't have a BMC here. */
+ /*
+ * Attempt a get device id command. If it fails, we probably
+ * don't have a BMC here.
+ */
rv = try_get_dev_id(new_smi);
if (rv) {
if (new_smi->addr_source)
@@ -2767,22 +2833,28 @@ static int try_smi_init(struct smi_info *new_smi)
new_smi->curr_msg = NULL;
atomic_set(&new_smi->req_events, 0);
new_smi->run_to_completion = 0;
+ for (i = 0; i < SI_NUM_STATS; i++)
+ atomic_set(&new_smi->stats[i], 0);
new_smi->interrupt_disabled = 0;
atomic_set(&new_smi->stop_operation, 0);
new_smi->intf_num = smi_num;
smi_num++;
- /* Start clearing the flags before we enable interrupts or the
- timer to avoid racing with the timer. */
+ /*
+ * Start clearing the flags before we enable interrupts or the
+ * timer to avoid racing with the timer.
+ */
start_clear_flags(new_smi);
/* IRQ is defined to be set when non-zero. */
if (new_smi->irq)
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
if (!new_smi->dev) {
- /* If we don't already have a device from something
- * else (like PCI), then register a new one. */
+ /*
+ * If we don't already have a device from something
+ * else (like PCI), then register a new one.
+ */
new_smi->pdev = platform_device_alloc("ipmi_si",
new_smi->intf_num);
if (rv) {
@@ -2820,7 +2892,7 @@ static int try_smi_init(struct smi_info *new_smi)
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
- type_file_read_proc, NULL,
+ type_file_read_proc,
new_smi, THIS_MODULE);
if (rv) {
printk(KERN_ERR
@@ -2830,7 +2902,7 @@ static int try_smi_init(struct smi_info *new_smi)
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
- stat_file_read_proc, NULL,
+ stat_file_read_proc,
new_smi, THIS_MODULE);
if (rv) {
printk(KERN_ERR
@@ -2840,7 +2912,7 @@ static int try_smi_init(struct smi_info *new_smi)
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "params",
- param_read_proc, NULL,
+ param_read_proc,
new_smi, THIS_MODULE);
if (rv) {
printk(KERN_ERR
@@ -2853,7 +2925,8 @@ static int try_smi_init(struct smi_info *new_smi)
mutex_unlock(&smi_infos_lock);
- printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
+ printk(KERN_INFO "IPMI %s interface initialized\n",
+ si_to_str[new_smi->si_type]);
return 0;
@@ -2868,9 +2941,11 @@ static int try_smi_init(struct smi_info *new_smi)
if (new_smi->irq_cleanup)
new_smi->irq_cleanup(new_smi);
- /* Wait until we know that we are out of any interrupt
- handlers might have been running before we freed the
- interrupt. */
+ /*
+ * Wait until we know that we are out of any interrupt
+ * handlers might have been running before we freed the
+ * interrupt.
+ */
synchronize_sched();
if (new_smi->si_sm) {
@@ -2942,11 +3017,10 @@ static __devinit int init_ipmi_si(void)
#ifdef CONFIG_PCI
rv = pci_register_driver(&ipmi_pci_driver);
- if (rv){
+ if (rv)
printk(KERN_ERR
"init_ipmi_si: Unable to register PCI driver: %d\n",
rv);
- }
#endif
#ifdef CONFIG_PPC_OF
@@ -2975,7 +3049,8 @@ static __devinit int init_ipmi_si(void)
of_unregister_platform_driver(&ipmi_of_platform_driver);
#endif
driver_unregister(&ipmi_driver);
- printk("ipmi_si: Unable to find any System Interface(s)\n");
+ printk(KERN_WARNING
+ "ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
} else {
mutex_unlock(&smi_infos_lock);
@@ -2997,13 +3072,17 @@ static void cleanup_one_si(struct smi_info *to_clean)
/* Tell the driver that we are shutting down. */
atomic_inc(&to_clean->stop_operation);
- /* Make sure the timer and thread are stopped and will not run
- again. */
+ /*
+ * Make sure the timer and thread are stopped and will not run
+ * again.
+ */
wait_for_timer_and_thread(to_clean);
- /* Timeouts are stopped, now make sure the interrupts are off
- for the device. A little tricky with locks to make sure
- there are no races. */
+ /*
+ * Timeouts are stopped, now make sure the interrupts are off
+ * for the device. A little tricky with locks to make sure
+ * there are no races.
+ */
spin_lock_irqsave(&to_clean->si_lock, flags);
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
spin_unlock_irqrestore(&to_clean->si_lock, flags);
@@ -3074,4 +3153,5 @@ module_exit(cleanup_ipmi_si);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
-MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");
+MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
+ " system interfaces.");
diff --git a/drivers/char/ipmi/ipmi_si_sm.h b/drivers/char/ipmi/ipmi_si_sm.h
index 4b731b24dc1..df89f73475f 100644
--- a/drivers/char/ipmi/ipmi_si_sm.h
+++ b/drivers/char/ipmi/ipmi_si_sm.h
@@ -34,22 +34,27 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* This is defined by the state machines themselves, it is an opaque
- data type for them to use. */
+/*
+ * This is defined by the state machines themselves, it is an opaque
+ * data type for them to use.
+ */
struct si_sm_data;
-/* The structure for doing I/O in the state machine. The state
- machine doesn't have the actual I/O routines, they are done through
- this interface. */
-struct si_sm_io
-{
+/*
+ * The structure for doing I/O in the state machine. The state
+ * machine doesn't have the actual I/O routines, they are done through
+ * this interface.
+ */
+struct si_sm_io {
unsigned char (*inputb)(struct si_sm_io *io, unsigned int offset);
void (*outputb)(struct si_sm_io *io,
unsigned int offset,
unsigned char b);
- /* Generic info used by the actual handling routines, the
- state machine shouldn't touch these. */
+ /*
+ * Generic info used by the actual handling routines, the
+ * state machine shouldn't touch these.
+ */
void __iomem *addr;
int regspacing;
int regsize;
@@ -59,53 +64,67 @@ struct si_sm_io
};
/* Results of SMI events. */
-enum si_sm_result
-{
+enum si_sm_result {
SI_SM_CALL_WITHOUT_DELAY, /* Call the driver again immediately */
SI_SM_CALL_WITH_DELAY, /* Delay some before calling again. */
- SI_SM_CALL_WITH_TICK_DELAY, /* Delay at least 1 tick before calling again. */
+ SI_SM_CALL_WITH_TICK_DELAY,/* Delay >=1 tick before calling again. */
SI_SM_TRANSACTION_COMPLETE, /* A transaction is finished. */
SI_SM_IDLE, /* The SM is in idle state. */
SI_SM_HOSED, /* The hardware violated the state machine. */
- SI_SM_ATTN /* The hardware is asserting attn and the
- state machine is idle. */
+
+ /*
+ * The hardware is asserting attn and the state machine is
+ * idle.
+ */
+ SI_SM_ATTN
};
/* Handlers for the SMI state machine. */
-struct si_sm_handlers
-{
- /* Put the version number of the state machine here so the
- upper layer can print it. */
+struct si_sm_handlers {
+ /*
+ * Put the version number of the state machine here so the
+ * upper layer can print it.
+ */
char *version;
- /* Initialize the data and return the amount of I/O space to
- reserve for the space. */
+ /*
+ * Initialize the data and return the amount of I/O space to
+ * reserve for the space.
+ */
unsigned int (*init_data)(struct si_sm_data *smi,
struct si_sm_io *io);
- /* Start a new transaction in the state machine. This will
- return -2 if the state machine is not idle, -1 if the size
- is invalid (to large or too small), or 0 if the transaction
- is successfully completed. */
+ /*
+ * Start a new transaction in the state machine. This will
+ * return -2 if the state machine is not idle, -1 if the size
+ * is invalid (to large or too small), or 0 if the transaction
+ * is successfully completed.
+ */
int (*start_transaction)(struct si_sm_data *smi,
unsigned char *data, unsigned int size);
- /* Return the results after the transaction. This will return
- -1 if the buffer is too small, zero if no transaction is
- present, or the actual length of the result data. */
+ /*
+ * Return the results after the transaction. This will return
+ * -1 if the buffer is too small, zero if no transaction is
+ * present, or the actual length of the result data.
+ */
int (*get_result)(struct si_sm_data *smi,
unsigned char *data, unsigned int length);
- /* Call this periodically (for a polled interface) or upon
- receiving an interrupt (for a interrupt-driven interface).
- If interrupt driven, you should probably poll this
- periodically when not in idle state. This should be called
- with the time that passed since the last call, if it is
- significant. Time is in microseconds. */
+ /*
+ * Call this periodically (for a polled interface) or upon
+ * receiving an interrupt (for a interrupt-driven interface).
+ * If interrupt driven, you should probably poll this
+ * periodically when not in idle state. This should be called
+ * with the time that passed since the last call, if it is
+ * significant. Time is in microseconds.
+ */
enum si_sm_result (*event)(struct si_sm_data *smi, long time);
- /* Attempt to detect an SMI. Returns 0 on success or nonzero
- on failure. */
+ /*
+ * Attempt to detect an SMI. Returns 0 on success or nonzero
+ * on failure.
+ */
int (*detect)(struct si_sm_data *smi);
/* The interface is shutting down, so clean it up. */
diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c
index e64ea7d25d2..faed9297190 100644
--- a/drivers/char/ipmi/ipmi_smic_sm.c
+++ b/drivers/char/ipmi/ipmi_smic_sm.c
@@ -85,6 +85,7 @@ enum smic_states {
/* SMIC Flags Register Bits */
#define SMIC_RX_DATA_READY 0x80
#define SMIC_TX_DATA_READY 0x40
+
/*
* SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by
* a few systems, and then only by Systems Management
@@ -104,23 +105,22 @@ enum smic_states {
#define EC_ILLEGAL_COMMAND 0x04
#define EC_BUFFER_FULL 0x05
-struct si_sm_data
-{
+struct si_sm_data {
enum smic_states state;
struct si_sm_io *io;
- unsigned char write_data[MAX_SMIC_WRITE_SIZE];
- int write_pos;
- int write_count;
- int orig_write_count;
- unsigned char read_data[MAX_SMIC_READ_SIZE];
- int read_pos;
- int truncated;
- unsigned int error_retries;
- long smic_timeout;
+ unsigned char write_data[MAX_SMIC_WRITE_SIZE];
+ int write_pos;
+ int write_count;
+ int orig_write_count;
+ unsigned char read_data[MAX_SMIC_READ_SIZE];
+ int read_pos;
+ int truncated;
+ unsigned int error_retries;
+ long smic_timeout;
};
-static unsigned int init_smic_data (struct si_sm_data *smic,
- struct si_sm_io *io)
+static unsigned int init_smic_data(struct si_sm_data *smic,
+ struct si_sm_io *io)
{
smic->state = SMIC_IDLE;
smic->io = io;
@@ -150,11 +150,10 @@ static int start_smic_transaction(struct si_sm_data *smic,
return IPMI_NOT_IN_MY_STATE_ERR;
if (smic_debug & SMIC_DEBUG_MSG) {
- printk(KERN_INFO "start_smic_transaction -");
- for (i = 0; i < size; i ++) {
- printk (" %02x", (unsigned char) (data [i]));
- }
- printk ("\n");
+ printk(KERN_DEBUG "start_smic_transaction -");
+ for (i = 0; i < size; i++)
+ printk(" %02x", (unsigned char) data[i]);
+ printk("\n");
}
smic->error_retries = 0;
memcpy(smic->write_data, data, size);
@@ -173,11 +172,10 @@ static int smic_get_result(struct si_sm_data *smic,
int i;
if (smic_debug & SMIC_DEBUG_MSG) {
- printk (KERN_INFO "smic_get result -");
- for (i = 0; i < smic->read_pos; i ++) {
- printk (" %02x", (smic->read_data [i]));
- }
- printk ("\n");
+ printk(KERN_DEBUG "smic_get result -");
+ for (i = 0; i < smic->read_pos; i++)
+ printk(" %02x", smic->read_data[i]);
+ printk("\n");
}
if (length < smic->read_pos) {
smic->read_pos = length;
@@ -223,8 +221,8 @@ static inline void write_smic_control(struct si_sm_data *smic,
smic->io->outputb(smic->io, 1, control);
}
-static inline void write_si_sm_data (struct si_sm_data *smic,
- unsigned char data)
+static inline void write_si_sm_data(struct si_sm_data *smic,
+ unsigned char data)
{
smic->io->outputb(smic->io, 0, data);
}
@@ -233,10 +231,9 @@ static inline void start_error_recovery(struct si_sm_data *smic, char *reason)
{
(smic->error_retries)++;
if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) {
- if (smic_debug & SMIC_DEBUG_ENABLE) {
+ if (smic_debug & SMIC_DEBUG_ENABLE)
printk(KERN_WARNING
"ipmi_smic_drv: smic hosed: %s\n", reason);
- }
smic->state = SMIC_HOSED;
} else {
smic->write_count = smic->orig_write_count;
@@ -254,14 +251,14 @@ static inline void write_next_byte(struct si_sm_data *smic)
(smic->write_count)--;
}
-static inline void read_next_byte (struct si_sm_data *smic)
+static inline void read_next_byte(struct si_sm_data *smic)
{
if (smic->read_pos >= MAX_SMIC_READ_SIZE) {
- read_smic_data (smic);
+ read_smic_data(smic);
smic->truncated = 1;
} else {
smic->read_data[smic->read_pos] = read_smic_data(smic);
- (smic->read_pos)++;
+ smic->read_pos++;
}
}
@@ -336,7 +333,7 @@ static inline void read_next_byte (struct si_sm_data *smic)
SMIC_SC_SMS_RD_END 0xC6
*/
-static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
+static enum si_sm_result smic_event(struct si_sm_data *smic, long time)
{
unsigned char status;
unsigned char flags;
@@ -347,13 +344,15 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
return SI_SM_HOSED;
}
if (smic->state != SMIC_IDLE) {
- if (smic_debug & SMIC_DEBUG_STATES) {
- printk(KERN_INFO
+ if (smic_debug & SMIC_DEBUG_STATES)
+ printk(KERN_DEBUG
"smic_event - smic->smic_timeout = %ld,"
" time = %ld\n",
smic->smic_timeout, time);
- }
-/* FIXME: smic_event is sometimes called with time > SMIC_RETRY_TIMEOUT */
+ /*
+ * FIXME: smic_event is sometimes called with time >
+ * SMIC_RETRY_TIMEOUT
+ */
if (time < SMIC_RETRY_TIMEOUT) {
smic->smic_timeout -= time;
if (smic->smic_timeout < 0) {
@@ -366,9 +365,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
if (flags & SMIC_FLAG_BSY)
return SI_SM_CALL_WITH_DELAY;
- status = read_smic_status (smic);
+ status = read_smic_status(smic);
if (smic_debug & SMIC_DEBUG_STATES)
- printk(KERN_INFO
+ printk(KERN_DEBUG
"smic_event - state = %d, flags = 0x%02x,"
" status = 0x%02x\n",
smic->state, flags, status);
@@ -377,9 +376,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
case SMIC_IDLE:
/* in IDLE we check for available messages */
if (flags & SMIC_SMS_DATA_AVAIL)
- {
return SI_SM_ATTN;
- }
return SI_SM_IDLE;
case SMIC_START_OP:
@@ -391,7 +388,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
case SMIC_OP_OK:
if (status != SMIC_SC_SMS_READY) {
- /* this should not happen */
+ /* this should not happen */
start_error_recovery(smic,
"state = SMIC_OP_OK,"
" status != SMIC_SC_SMS_READY");
@@ -411,8 +408,10 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
"status != SMIC_SC_SMS_WR_START");
return SI_SM_CALL_WITH_DELAY;
}
- /* we must not issue WR_(NEXT|END) unless
- TX_DATA_READY is set */
+ /*
+ * we must not issue WR_(NEXT|END) unless
+ * TX_DATA_READY is set
+ * */
if (flags & SMIC_TX_DATA_READY) {
if (smic->write_count == 1) {
/* last byte */
@@ -424,10 +423,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
}
write_next_byte(smic);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
- }
- else {
+ } else
return SI_SM_CALL_WITH_DELAY;
- }
break;
case SMIC_WRITE_NEXT:
@@ -442,52 +439,48 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
if (smic->write_count == 1) {
write_smic_control(smic, SMIC_CC_SMS_WR_END);
smic->state = SMIC_WRITE_END;
- }
- else {
+ } else {
write_smic_control(smic, SMIC_CC_SMS_WR_NEXT);
smic->state = SMIC_WRITE_NEXT;
}
write_next_byte(smic);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
- }
- else {
+ } else
return SI_SM_CALL_WITH_DELAY;
- }
break;
case SMIC_WRITE_END:
if (status != SMIC_SC_SMS_WR_END) {
- start_error_recovery (smic,
- "state = SMIC_WRITE_END, "
- "status != SMIC_SC_SMS_WR_END");
+ start_error_recovery(smic,
+ "state = SMIC_WRITE_END, "
+ "status != SMIC_SC_SMS_WR_END");
return SI_SM_CALL_WITH_DELAY;
}
/* data register holds an error code */
data = read_smic_data(smic);
if (data != 0) {
- if (smic_debug & SMIC_DEBUG_ENABLE) {
- printk(KERN_INFO
+ if (smic_debug & SMIC_DEBUG_ENABLE)
+ printk(KERN_DEBUG
"SMIC_WRITE_END: data = %02x\n", data);
- }
start_error_recovery(smic,
"state = SMIC_WRITE_END, "
"data != SUCCESS");
return SI_SM_CALL_WITH_DELAY;
- } else {
+ } else
smic->state = SMIC_WRITE2READ;
- }
break;
case SMIC_WRITE2READ:
- /* we must wait for RX_DATA_READY to be set before we
- can continue */
+ /*
+ * we must wait for RX_DATA_READY to be set before we
+ * can continue
+ */
if (flags & SMIC_RX_DATA_READY) {
write_smic_control(smic, SMIC_CC_SMS_RD_START);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
smic->state = SMIC_READ_START;
- } else {
+ } else
return SI_SM_CALL_WITH_DELAY;
- }
break;
case SMIC_READ_START:
@@ -502,15 +495,16 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
smic->state = SMIC_READ_NEXT;
- } else {
+ } else
return SI_SM_CALL_WITH_DELAY;
- }
break;
case SMIC_READ_NEXT:
switch (status) {
- /* smic tells us that this is the last byte to be read
- --> clean up */
+ /*
+ * smic tells us that this is the last byte to be read
+ * --> clean up
+ */
case SMIC_SC_SMS_RD_END:
read_next_byte(smic);
write_smic_control(smic, SMIC_CC_SMS_RD_END);
@@ -523,9 +517,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
write_smic_flags(smic, flags | SMIC_FLAG_BSY);
smic->state = SMIC_READ_NEXT;
- } else {
+ } else
return SI_SM_CALL_WITH_DELAY;
- }
break;
default:
start_error_recovery(
@@ -546,10 +539,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
data = read_smic_data(smic);
/* data register holds an error code */
if (data != 0) {
- if (smic_debug & SMIC_DEBUG_ENABLE) {
- printk(KERN_INFO
+ if (smic_debug & SMIC_DEBUG_ENABLE)
+ printk(KERN_DEBUG
"SMIC_READ_END: data = %02x\n", data);
- }
start_error_recovery(smic,
"state = SMIC_READ_END, "
"data != SUCCESS");
@@ -565,7 +557,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
default:
if (smic_debug & SMIC_DEBUG_ENABLE) {
- printk(KERN_WARNING "smic->state = %d\n", smic->state);
+ printk(KERN_DEBUG "smic->state = %d\n", smic->state);
start_error_recovery(smic, "state = UNKNOWN");
return SI_SM_CALL_WITH_DELAY;
}
@@ -576,10 +568,12 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time)
static int smic_detect(struct si_sm_data *smic)
{
- /* It's impossible for the SMIC fnags register to be all 1's,
- (assuming a properly functioning, self-initialized BMC)
- but that's what you get from reading a bogus address, so we
- test that first. */
+ /*
+ * It's impossible for the SMIC fnags register to be all 1's,
+ * (assuming a properly functioning, self-initialized BMC)
+ * but that's what you get from reading a bogus address, so we
+ * test that first.
+ */
if (read_smic_flags(smic) == 0xff)
return 1;
@@ -595,8 +589,7 @@ static int smic_size(void)
return sizeof(struct si_sm_data);
}
-struct si_sm_handlers smic_smi_handlers =
-{
+struct si_sm_handlers smic_smi_handlers = {
.init_data = init_smic_data,
.start_transaction = start_smic_transaction,
.get_result = smic_get_result,
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 8f45ca9235a..1b9a8704781 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -54,13 +54,15 @@
#include <asm/atomic.h>
#ifdef CONFIG_X86
-/* This is ugly, but I've determined that x86 is the only architecture
- that can reasonably support the IPMI NMI watchdog timeout at this
- time. If another architecture adds this capability somehow, it
- will have to be a somewhat different mechanism and I have no idea
- how it will work. So in the unlikely event that another
- architecture supports this, we can figure out a good generic
- mechanism for it at that time. */
+/*
+ * This is ugly, but I've determined that x86 is the only architecture
+ * that can reasonably support the IPMI NMI watchdog timeout at this
+ * time. If another architecture adds this capability somehow, it
+ * will have to be a somewhat different mechanism and I have no idea
+ * how it will work. So in the unlikely event that another
+ * architecture supports this, we can figure out a good generic
+ * mechanism for it at that time.
+ */
#include <asm/kdebug.h>
#define HAVE_DIE_NMI
#endif
@@ -95,9 +97,8 @@
/* Operations that can be performed on a pretimout. */
#define WDOG_PREOP_NONE 0
#define WDOG_PREOP_PANIC 1
-#define WDOG_PREOP_GIVE_DATA 2 /* Cause data to be available to
- read. Doesn't work in NMI
- mode. */
+/* Cause data to be available to read. Doesn't work in NMI mode. */
+#define WDOG_PREOP_GIVE_DATA 2
/* Actions to perform on a full timeout. */
#define WDOG_SET_TIMEOUT_ACT(byte, use) \
@@ -108,8 +109,10 @@
#define WDOG_TIMEOUT_POWER_DOWN 2
#define WDOG_TIMEOUT_POWER_CYCLE 3
-/* Byte 3 of the get command, byte 4 of the get response is the
- pre-timeout in seconds. */
+/*
+ * Byte 3 of the get command, byte 4 of the get response is the
+ * pre-timeout in seconds.
+ */
/* Bits for setting byte 4 of the set command, byte 5 of the get response. */
#define WDOG_EXPIRE_CLEAR_BIOS_FRB2 (1 << 1)
@@ -118,11 +121,13 @@
#define WDOG_EXPIRE_CLEAR_SMS_OS (1 << 4)
#define WDOG_EXPIRE_CLEAR_OEM (1 << 5)
-/* Setting/getting the watchdog timer value. This is for bytes 5 and
- 6 (the timeout time) of the set command, and bytes 6 and 7 (the
- timeout time) and 8 and 9 (the current countdown value) of the
- response. The timeout value is given in seconds (in the command it
- is 100ms intervals). */
+/*
+ * Setting/getting the watchdog timer value. This is for bytes 5 and
+ * 6 (the timeout time) of the set command, and bytes 6 and 7 (the
+ * timeout time) and 8 and 9 (the current countdown value) of the
+ * response. The timeout value is given in seconds (in the command it
+ * is 100ms intervals).
+ */
#define WDOG_SET_TIMEOUT(byte1, byte2, val) \
(byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8)
#define WDOG_GET_TIMEOUT(byte1, byte2) \
@@ -184,8 +189,10 @@ static int ipmi_set_timeout(int do_heartbeat);
static void ipmi_register_watchdog(int ipmi_intf);
static void ipmi_unregister_watchdog(int ipmi_intf);
-/* If true, the driver will start running as soon as it is configured
- and ready. */
+/*
+ * If true, the driver will start running as soon as it is configured
+ * and ready.
+ */
static int start_now;
static int set_param_int(const char *val, struct kernel_param *kp)
@@ -309,10 +316,12 @@ static int ipmi_ignore_heartbeat;
/* Is someone using the watchdog? Only one user is allowed. */
static unsigned long ipmi_wdog_open;
-/* If set to 1, the heartbeat command will set the state to reset and
- start the timer. The timer doesn't normally run when the driver is
- first opened until the heartbeat is set the first time, this
- variable is used to accomplish this. */
+/*
+ * If set to 1, the heartbeat command will set the state to reset and
+ * start the timer. The timer doesn't normally run when the driver is
+ * first opened until the heartbeat is set the first time, this
+ * variable is used to accomplish this.
+ */
static int ipmi_start_timer_on_heartbeat;
/* IPMI version of the BMC. */
@@ -329,10 +338,12 @@ static int nmi_handler_registered;
static int ipmi_heartbeat(void);
-/* We use a mutex to make sure that only one thing can send a set
- timeout at one time, because we only have one copy of the data.
- The mutex is claimed when the set_timeout is sent and freed
- when both messages are free. */
+/*
+ * We use a mutex to make sure that only one thing can send a set
+ * timeout at one time, because we only have one copy of the data.
+ * The mutex is claimed when the set_timeout is sent and freed
+ * when both messages are free.
+ */
static atomic_t set_timeout_tofree = ATOMIC_INIT(0);
static DEFINE_MUTEX(set_timeout_lock);
static DECLARE_COMPLETION(set_timeout_wait);
@@ -346,15 +357,13 @@ static void set_timeout_free_recv(struct ipmi_recv_msg *msg)
if (atomic_dec_and_test(&set_timeout_tofree))
complete(&set_timeout_wait);
}
-static struct ipmi_smi_msg set_timeout_smi_msg =
-{
+static struct ipmi_smi_msg set_timeout_smi_msg = {
.done = set_timeout_free_smi
};
-static struct ipmi_recv_msg set_timeout_recv_msg =
-{
+static struct ipmi_recv_msg set_timeout_recv_msg = {
.done = set_timeout_free_recv
};
-
+
static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg,
struct ipmi_recv_msg *recv_msg,
int *send_heartbeat_now)
@@ -373,13 +382,14 @@ static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg,
WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS);
if ((ipmi_version_major > 1)
- || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5)))
- {
+ || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) {
/* This is an IPMI 1.5-only feature. */
data[0] |= WDOG_DONT_STOP_ON_SET;
} else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
- /* In ipmi 1.0, setting the timer stops the watchdog, we
- need to start it back up again. */
+ /*
+ * In ipmi 1.0, setting the timer stops the watchdog, we
+ * need to start it back up again.
+ */
hbnow = 1;
}
@@ -465,12 +475,10 @@ static void panic_recv_free(struct ipmi_recv_msg *msg)
atomic_dec(&panic_done_count);
}
-static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg =
-{
+static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = {
.done = panic_smi_free
};
-static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg =
-{
+static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = {
.done = panic_recv_free
};
@@ -480,8 +488,10 @@ static void panic_halt_ipmi_heartbeat(void)
struct ipmi_system_interface_addr addr;
int rv;
- /* Don't reset the timer if we have the timer turned off, that
- re-enables the watchdog. */
+ /*
+ * Don't reset the timer if we have the timer turned off, that
+ * re-enables the watchdog.
+ */
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
return;
@@ -505,19 +515,19 @@ static void panic_halt_ipmi_heartbeat(void)
atomic_add(2, &panic_done_count);
}
-static struct ipmi_smi_msg panic_halt_smi_msg =
-{
+static struct ipmi_smi_msg panic_halt_smi_msg = {
.done = panic_smi_free
};
-static struct ipmi_recv_msg panic_halt_recv_msg =
-{
+static struct ipmi_recv_msg panic_halt_recv_msg = {
.done = panic_recv_free
};
-/* Special call, doesn't claim any locks. This is only to be called
- at panic or halt time, in run-to-completion mode, when the caller
- is the only CPU and the only thing that will be going is these IPMI
- calls. */
+/*
+ * Special call, doesn't claim any locks. This is only to be called
+ * at panic or halt time, in run-to-completion mode, when the caller
+ * is the only CPU and the only thing that will be going is these IPMI
+ * calls.
+ */
static void panic_halt_ipmi_set_timeout(void)
{
int send_heartbeat_now;
@@ -540,10 +550,12 @@ static void panic_halt_ipmi_set_timeout(void)
ipmi_poll_interface(watchdog_user);
}
-/* We use a semaphore to make sure that only one thing can send a
- heartbeat at one time, because we only have one copy of the data.
- The semaphore is claimed when the set_timeout is sent and freed
- when both messages are free. */
+/*
+ * We use a mutex to make sure that only one thing can send a
+ * heartbeat at one time, because we only have one copy of the data.
+ * The semaphore is claimed when the set_timeout is sent and freed
+ * when both messages are free.
+ */
static atomic_t heartbeat_tofree = ATOMIC_INIT(0);
static DEFINE_MUTEX(heartbeat_lock);
static DECLARE_COMPLETION(heartbeat_wait);
@@ -557,15 +569,13 @@ static void heartbeat_free_recv(struct ipmi_recv_msg *msg)
if (atomic_dec_and_test(&heartbeat_tofree))
complete(&heartbeat_wait);
}
-static struct ipmi_smi_msg heartbeat_smi_msg =
-{
+static struct ipmi_smi_msg heartbeat_smi_msg = {
.done = heartbeat_free_smi
};
-static struct ipmi_recv_msg heartbeat_recv_msg =
-{
+static struct ipmi_recv_msg heartbeat_recv_msg = {
.done = heartbeat_free_recv
};
-
+
static int ipmi_heartbeat(void)
{
struct kernel_ipmi_msg msg;
@@ -580,10 +590,12 @@ static int ipmi_heartbeat(void)
ipmi_watchdog_state = action_val;
return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
} else if (pretimeout_since_last_heartbeat) {
- /* A pretimeout occurred, make sure we set the timeout.
- We don't want to set the action, though, we want to
- leave that alone (thus it can't be combined with the
- above operation. */
+ /*
+ * A pretimeout occurred, make sure we set the timeout.
+ * We don't want to set the action, though, we want to
+ * leave that alone (thus it can't be combined with the
+ * above operation.
+ */
return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
}
@@ -591,8 +603,10 @@ static int ipmi_heartbeat(void)
atomic_set(&heartbeat_tofree, 2);
- /* Don't reset the timer if we have the timer turned off, that
- re-enables the watchdog. */
+ /*
+ * Don't reset the timer if we have the timer turned off, that
+ * re-enables the watchdog.
+ */
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) {
mutex_unlock(&heartbeat_lock);
return 0;
@@ -625,10 +639,12 @@ static int ipmi_heartbeat(void)
wait_for_completion(&heartbeat_wait);
if (heartbeat_recv_msg.msg.data[0] != 0) {
- /* Got an error in the heartbeat response. It was already
- reported in ipmi_wdog_msg_handler, but we should return
- an error here. */
- rv = -EINVAL;
+ /*
+ * Got an error in the heartbeat response. It was already
+ * reported in ipmi_wdog_msg_handler, but we should return
+ * an error here.
+ */
+ rv = -EINVAL;
}
mutex_unlock(&heartbeat_lock);
@@ -636,8 +652,7 @@ static int ipmi_heartbeat(void)
return rv;
}
-static struct watchdog_info ident =
-{
+static struct watchdog_info ident = {
.options = 0, /* WDIOF_SETTIMEOUT, */
.firmware_version = 1,
.identity = "IPMI"
@@ -650,7 +665,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file,
int i;
int val;
- switch(cmd) {
+ switch (cmd) {
case WDIOC_GETSUPPORT:
i = copy_to_user(argp, &ident, sizeof(ident));
return i ? -EFAULT : 0;
@@ -690,15 +705,13 @@ static int ipmi_ioctl(struct inode *inode, struct file *file,
i = copy_from_user(&val, argp, sizeof(int));
if (i)
return -EFAULT;
- if (val & WDIOS_DISABLECARD)
- {
+ if (val & WDIOS_DISABLECARD) {
ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
ipmi_start_timer_on_heartbeat = 0;
}
- if (val & WDIOS_ENABLECARD)
- {
+ if (val & WDIOS_ENABLECARD) {
ipmi_watchdog_state = action_val;
ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
}
@@ -724,13 +737,13 @@ static ssize_t ipmi_write(struct file *file,
int rv;
if (len) {
- if (!nowayout) {
- size_t i;
+ if (!nowayout) {
+ size_t i;
/* In case it was set long ago */
expect_close = 0;
- for (i = 0; i != len; i++) {
+ for (i = 0; i != len; i++) {
char c;
if (get_user(c, buf + i))
@@ -758,15 +771,17 @@ static ssize_t ipmi_read(struct file *file,
if (count <= 0)
return 0;
- /* Reading returns if the pretimeout has gone off, and it only does
- it once per pretimeout. */
+ /*
+ * Reading returns if the pretimeout has gone off, and it only does
+ * it once per pretimeout.
+ */
spin_lock(&ipmi_read_lock);
if (!data_to_read) {
if (file->f_flags & O_NONBLOCK) {
rv = -EAGAIN;
goto out;
}
-
+
init_waitqueue_entry(&wait, current);
add_wait_queue(&read_q, &wait);
while (!data_to_read) {
@@ -776,7 +791,7 @@ static ssize_t ipmi_read(struct file *file,
spin_lock(&ipmi_read_lock);
}
remove_wait_queue(&read_q, &wait);
-
+
if (signal_pending(current)) {
rv = -ERESTARTSYS;
goto out;
@@ -799,25 +814,27 @@ static ssize_t ipmi_read(struct file *file,
static int ipmi_open(struct inode *ino, struct file *filep)
{
- switch (iminor(ino)) {
- case WATCHDOG_MINOR:
+ switch (iminor(ino)) {
+ case WATCHDOG_MINOR:
if (test_and_set_bit(0, &ipmi_wdog_open))
- return -EBUSY;
+ return -EBUSY;
- /* Don't start the timer now, let it start on the
- first heartbeat. */
+ /*
+ * Don't start the timer now, let it start on the
+ * first heartbeat.
+ */
ipmi_start_timer_on_heartbeat = 1;
return nonseekable_open(ino, filep);
default:
return (-ENODEV);
- }
+ }
}
static unsigned int ipmi_poll(struct file *file, poll_table *wait)
{
unsigned int mask = 0;
-
+
poll_wait(file, &read_q, wait);
spin_lock(&ipmi_read_lock);
@@ -851,7 +868,7 @@ static int ipmi_close(struct inode *ino, struct file *filep)
clear_bit(0, &ipmi_wdog_open);
}
- ipmi_fasync (-1, filep, 0);
+ ipmi_fasync(-1, filep, 0);
expect_close = 0;
return 0;
@@ -882,7 +899,7 @@ static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg,
msg->msg.data[0],
msg->msg.cmd);
}
-
+
ipmi_free_recv_msg(msg);
}
@@ -902,14 +919,14 @@ static void ipmi_wdog_pretimeout_handler(void *handler_data)
}
}
- /* On some machines, the heartbeat will give
- an error and not work unless we re-enable
- the timer. So do so. */
+ /*
+ * On some machines, the heartbeat will give an error and not
+ * work unless we re-enable the timer. So do so.
+ */
pretimeout_since_last_heartbeat = 1;
}
-static struct ipmi_user_hndl ipmi_hndlrs =
-{
+static struct ipmi_user_hndl ipmi_hndlrs = {
.ipmi_recv_hndl = ipmi_wdog_msg_handler,
.ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler
};
@@ -949,8 +966,10 @@ static void ipmi_register_watchdog(int ipmi_intf)
int old_timeout = timeout;
int old_preop_val = preop_val;
- /* Set the pretimeout to go off in a second and give
- ourselves plenty of time to stop the timer. */
+ /*
+ * Set the pretimeout to go off in a second and give
+ * ourselves plenty of time to stop the timer.
+ */
ipmi_watchdog_state = WDOG_TIMEOUT_RESET;
preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */
pretimeout = 99;
@@ -974,7 +993,7 @@ static void ipmi_register_watchdog(int ipmi_intf)
" occur. The NMI pretimeout will"
" likely not work\n");
}
- out_restore:
+ out_restore:
testing_nmi = 0;
preop_val = old_preop_val;
pretimeout = old_pretimeout;
@@ -1009,9 +1028,11 @@ static void ipmi_unregister_watchdog(int ipmi_intf)
/* Make sure no one can call us any more. */
misc_deregister(&ipmi_wdog_miscdev);
- /* Wait to make sure the message makes it out. The lower layer has
- pointers to our buffers, we want to make sure they are done before
- we release our memory. */
+ /*
+ * Wait to make sure the message makes it out. The lower layer has
+ * pointers to our buffers, we want to make sure they are done before
+ * we release our memory.
+ */
while (atomic_read(&set_timeout_tofree))
schedule_timeout_uninterruptible(1);
@@ -1052,15 +1073,17 @@ ipmi_nmi(struct notifier_block *self, unsigned long val, void *data)
return NOTIFY_STOP;
}
- /* If we are not expecting a timeout, ignore it. */
+ /* If we are not expecting a timeout, ignore it. */
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
return NOTIFY_OK;
if (preaction_val != WDOG_PRETIMEOUT_NMI)
return NOTIFY_OK;
- /* If no one else handled the NMI, we assume it was the IPMI
- watchdog. */
+ /*
+ * If no one else handled the NMI, we assume it was the IPMI
+ * watchdog.
+ */
if (preop_val == WDOG_PREOP_PANIC) {
/* On some machines, the heartbeat will give
an error and not work unless we re-enable
@@ -1082,7 +1105,7 @@ static int wdog_reboot_handler(struct notifier_block *this,
unsigned long code,
void *unused)
{
- static int reboot_event_handled = 0;
+ static int reboot_event_handled;
if ((watchdog_user) && (!reboot_event_handled)) {
/* Make sure we only do this once. */
@@ -1115,7 +1138,7 @@ static int wdog_panic_handler(struct notifier_block *this,
unsigned long event,
void *unused)
{
- static int panic_event_handled = 0;
+ static int panic_event_handled;
/* On a panic, if we have a panic timeout, make sure to extend
the watchdog timer to a reasonable value to complete the
@@ -1125,7 +1148,7 @@ static int wdog_panic_handler(struct notifier_block *this,
ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
/* Make sure we do this only once. */
panic_event_handled = 1;
-
+
timeout = 255;
pretimeout = 0;
panic_halt_ipmi_set_timeout();
@@ -1151,8 +1174,7 @@ static void ipmi_smi_gone(int if_num)
ipmi_unregister_watchdog(if_num);
}
-static struct ipmi_smi_watcher smi_watcher =
-{
+static struct ipmi_smi_watcher smi_watcher = {
.owner = THIS_MODULE,
.new_smi = ipmi_new_smi,
.smi_gone = ipmi_smi_gone
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index eba2883b630..4f3cefa8eb0 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -126,8 +126,8 @@
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <linux/pci.h>
@@ -189,7 +189,7 @@ struct isi_board {
unsigned short status;
unsigned short port_status; /* each bit for each port */
unsigned short shift_count;
- struct isi_port * ports;
+ struct isi_port *ports;
signed char count;
spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
unsigned long flags;
@@ -205,11 +205,11 @@ struct isi_port {
u16 channel;
u16 status;
u16 closing_wait;
- struct isi_board * card;
- struct tty_struct * tty;
+ struct isi_board *card;
+ struct tty_struct *tty;
wait_queue_head_t close_wait;
wait_queue_head_t open_wait;
- unsigned char * xmit_buf;
+ unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
@@ -405,7 +405,7 @@ static void isicom_tx(unsigned long _data)
/* find next active board */
card = (prev_card + 1) & 0x0003;
- while(count-- > 0) {
+ while (count-- > 0) {
if (isi_card[card].status & BOARD_ACTIVE)
break;
card = (card + 1) & 0x0003;
@@ -428,7 +428,7 @@ static void isicom_tx(unsigned long _data)
if (retries >= 100)
goto unlock;
- for (;count > 0;count--, port++) {
+ for (; count > 0; count--, port++) {
/* port not active or tx disabled to force flow control */
if (!(port->flags & ASYNC_INITIALIZED) ||
!(port->status & ISI_TXOK))
@@ -471,9 +471,10 @@ static void isicom_tx(unsigned long _data)
break;
}
}
- if (cnt <= 0) break;
+ if (cnt <= 0)
+ break;
word_count = cnt >> 1;
- outsw(base, port->xmit_buf+port->xmit_tail,word_count);
+ outsw(base, port->xmit_buf+port->xmit_tail, word_count);
port->xmit_tail = (port->xmit_tail
+ (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
txcount -= (word_count << 1);
@@ -556,7 +557,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
tty = port->tty;
if (tty == NULL) {
word_count = byte_count >> 1;
- while(byte_count > 1) {
+ while (byte_count > 1) {
inw(base);
byte_count -= 2;
}
@@ -569,7 +570,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
if (header & 0x8000) { /* Status Packet */
header = inw(base);
- switch(header & 0xff) {
+ switch (header & 0xff) {
case 0: /* Change in EIA signals */
if (port->flags & ASYNC_CHECK_CD) {
if (port->status & ISI_DCD) {
@@ -656,7 +657,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
if (byte_count > 0) {
pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
"bytes...\n", base, channel + 1);
- while(byte_count > 0) { /* drain out unread xtra data */
+ /* drain out unread xtra data */
+ while (byte_count > 0) {
inw(base);
byte_count -= 2;
}
@@ -679,8 +681,11 @@ static void isicom_config_port(struct isi_port *port)
shift_count = card->shift_count;
unsigned char flow_ctrl;
- if (!(tty = port->tty) || !tty->termios)
+ tty = port->tty;
+
+ if (tty == NULL)
return;
+ /* FIXME: Switch to new tty baud API */
baud = C_BAUD(tty);
if (baud & CBAUDEX) {
baud &= ~CBAUDEX;
@@ -706,7 +711,7 @@ static void isicom_config_port(struct isi_port *port)
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baud++; /* 57.6 Kbps */
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- baud +=2; /* 115 Kbps */
+ baud += 2; /* 115 Kbps */
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
baud += 3; /* 230 kbps*/
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
@@ -716,15 +721,14 @@ static void isicom_config_port(struct isi_port *port)
/* hang up */
drop_dtr(port);
return;
- }
- else
+ } else
raise_dtr(port);
if (WaitTillCardIsFree(base) == 0) {
- outw(0x8000 | (channel << shift_count) |0x03, base);
+ outw(0x8000 | (channel << shift_count) | 0x03, base);
outw(linuxb_to_isib[baud] << 8 | 0x03, base);
channel_setup = 0;
- switch(C_CSIZE(tty)) {
+ switch (C_CSIZE(tty)) {
case CS5:
channel_setup |= ISICOM_CS5;
break;
@@ -767,7 +771,7 @@ static void isicom_config_port(struct isi_port *port)
flow_ctrl |= ISICOM_INITIATE_XONXOFF;
if (WaitTillCardIsFree(base) == 0) {
- outw(0x8000 | (channel << shift_count) |0x04, base);
+ outw(0x8000 | (channel << shift_count) | 0x04, base);
outw(flow_ctrl << 8 | 0x05, base);
outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
InterruptTheCard(base);
@@ -805,20 +809,17 @@ static int isicom_setup_port(struct isi_port *port)
struct isi_board *card = port->card;
unsigned long flags;
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED)
return 0;
- }
if (!port->xmit_buf) {
- unsigned long page;
-
- if (!(page = get_zeroed_page(GFP_KERNEL)))
+ /* Relies on BKL */
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
+ if (page == 0)
return -ENOMEM;
-
- if (port->xmit_buf) {
+ if (port->xmit_buf)
free_page(page);
- return -ERESTARTSYS;
- }
- port->xmit_buf = (unsigned char *) page;
+ else
+ port->xmit_buf = (unsigned char *) page;
}
spin_lock_irqsave(&card->card_lock, flags);
@@ -949,21 +950,18 @@ static int isicom_open(struct tty_struct *tty, struct file *filp)
port->count++;
tty->driver_data = port;
port->tty = tty;
- if ((error = isicom_setup_port(port))!=0)
- return error;
- if ((error = block_til_ready(tty, filp, port))!=0)
- return error;
-
- return 0;
+ error = isicom_setup_port(port);
+ if (error == 0)
+ error = block_til_ready(tty, filp, port);
+ return error;
}
/* close et all */
static inline void isicom_shutdown_board(struct isi_board *bp)
{
- if (bp->status & BOARD_ACTIVE) {
+ if (bp->status & BOARD_ACTIVE)
bp->status &= ~BOARD_ACTIVE;
- }
}
/* card->lock HAS to be held */
@@ -1012,6 +1010,22 @@ static void isicom_shutdown_port(struct isi_port *port)
}
}
+static void isicom_flush_buffer(struct tty_struct *tty)
+{
+ struct isi_port *port = tty->driver_data;
+ struct isi_board *card = port->card;
+ unsigned long flags;
+
+ if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
+ return;
+
+ spin_lock_irqsave(&card->card_lock, flags);
+ port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
+
+ tty_wakeup(tty);
+}
+
static void isicom_close(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port = tty->driver_data;
@@ -1065,8 +1079,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
isicom_shutdown_port(port);
spin_unlock_irqrestore(&card->card_lock, flags);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ isicom_flush_buffer(tty);
tty_ldisc_flush(tty);
spin_lock_irqsave(&card->card_lock, flags);
@@ -1104,7 +1117,7 @@ static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
spin_lock_irqsave(&card->card_lock, flags);
- while(1) {
+ while (1) {
cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
- 1, SERIAL_XMIT_SIZE - port->xmit_head));
if (cnt <= 0)
@@ -1125,28 +1138,29 @@ static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
}
/* put_char et all */
-static void isicom_put_char(struct tty_struct *tty, unsigned char ch)
+static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
{
struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
- return;
+ return 0;
if (!port->xmit_buf)
- return;
+ return 0;
spin_lock_irqsave(&card->card_lock, flags);
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
spin_unlock_irqrestore(&card->card_lock, flags);
- return;
+ return 0;
}
port->xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt++;
spin_unlock_irqrestore(&card->card_lock, flags);
+ return 1;
}
/* flush_chars et all */
@@ -1258,6 +1272,8 @@ static int isicom_set_serial_info(struct isi_port *port,
if (copy_from_user(&newinfo, info, sizeof(newinfo)))
return -EFAULT;
+ lock_kernel();
+
reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
(newinfo.flags & ASYNC_SPD_MASK));
@@ -1265,12 +1281,13 @@ static int isicom_set_serial_info(struct isi_port *port,
if ((newinfo.close_delay != port->close_delay) ||
(newinfo.closing_wait != port->closing_wait) ||
((newinfo.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->flags & ~ASYNC_USR_MASK))) {
+ unlock_kernel();
return -EPERM;
- port->flags = ((port->flags & ~ ASYNC_USR_MASK) |
+ }
+ port->flags = ((port->flags & ~ASYNC_USR_MASK) |
(newinfo.flags & ASYNC_USR_MASK));
- }
- else {
+ } else {
port->close_delay = newinfo.close_delay;
port->closing_wait = newinfo.closing_wait;
port->flags = ((port->flags & ~ASYNC_FLAGS) |
@@ -1282,6 +1299,7 @@ static int isicom_set_serial_info(struct isi_port *port,
isicom_config_port(port);
spin_unlock_irqrestore(&port->card->card_lock, flags);
}
+ unlock_kernel();
return 0;
}
@@ -1290,6 +1308,7 @@ static int isicom_get_serial_info(struct isi_port *port,
{
struct serial_struct out_info;
+ lock_kernel();
memset(&out_info, 0, sizeof(out_info));
/* out_info.type = ? */
out_info.line = port - isi_ports;
@@ -1299,6 +1318,7 @@ static int isicom_get_serial_info(struct isi_port *port,
/* out_info.baud_base = ? */
out_info.close_delay = port->close_delay;
out_info.closing_wait = port->closing_wait;
+ unlock_kernel();
if (copy_to_user(info, &out_info, sizeof(out_info)))
return -EFAULT;
return 0;
@@ -1314,7 +1334,7 @@ static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
return -ENODEV;
- switch(cmd) {
+ switch (cmd) {
case TCSBRK:
retval = tty_check_change(tty);
if (retval)
@@ -1331,19 +1351,6 @@ static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
tty_wait_until_sent(tty, 0);
isicom_send_break(port, arg ? arg * (HZ/10) : HZ/4);
return 0;
-
- case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0,
- (unsigned long __user *)argp);
-
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned long __user *) argp))
- return -EFAULT;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- return 0;
-
case TIOCGSERIAL:
return isicom_get_serial_info(port, argp);
@@ -1453,22 +1460,6 @@ static void isicom_hangup(struct tty_struct *tty)
wake_up_interruptible(&port->open_wait);
}
-/* flush_buffer et all */
-static void isicom_flush_buffer(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
- unsigned long flags;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
- return;
-
- spin_lock_irqsave(&card->card_lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&card->card_lock, flags);
-
- tty_wakeup(tty);
-}
/*
* Driver init and deinit functions
@@ -1592,7 +1583,7 @@ static int __devinit load_firmware(struct pci_dev *pdev,
default:
dev_err(&pdev->dev, "Unknown signature.\n");
goto end;
- }
+ }
retval = request_firmware(&fw, name, &pdev->dev);
if (retval)
@@ -1620,7 +1611,8 @@ static int __devinit load_firmware(struct pci_dev *pdev,
if (WaitTillCardIsFree(base))
goto errrelfw;
- if ((status = inw(base + 0x4)) != 0) {
+ status = inw(base + 0x4);
+ if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected load header:\n"
KERN_WARNING "Address:0x%x\n"
KERN_WARNING "Count:0x%x\n"
@@ -1637,12 +1629,13 @@ static int __devinit load_firmware(struct pci_dev *pdev,
if (WaitTillCardIsFree(base))
goto errrelfw;
- if ((status = inw(base + 0x4)) != 0) {
+ status = inw(base + 0x4);
+ if (status != 0) {
dev_err(&pdev->dev, "Card%d got out of sync.Card "
"Status:0x%x\n", index + 1, status);
goto errrelfw;
}
- }
+ }
/* XXX: should we test it by reading it back and comparing with original like
* in load firmware package? */
@@ -1666,7 +1659,8 @@ static int __devinit load_firmware(struct pci_dev *pdev,
if (WaitTillCardIsFree(base))
goto errrelfw;
- if ((status = inw(base + 0x4)) != 0) {
+ status = inw(base + 0x4);
+ if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
KERN_WARNING "Address:0x%x\n"
KERN_WARNING "Count:0x%x\n"
@@ -1699,7 +1693,8 @@ static int __devinit load_firmware(struct pci_dev *pdev,
if (WaitTillCardIsFree(base))
goto errrelfw;
- if ((status = inw(base + 0x4)) != 0) {
+ status = inw(base + 0x4);
+ if (status != 0) {
dev_err(&pdev->dev, "Card%d verify got out of sync. "
"Card Status:0x%x\n", index + 1, status);
goto errrelfw;
@@ -1764,7 +1759,7 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
index + 1);
retval = -EBUSY;
goto errdec;
- }
+ }
retval = request_irq(board->irq, isicom_interrupt,
IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
@@ -1818,7 +1813,7 @@ static int __init isicom_init(void)
int retval, idx, channel;
struct isi_port *port;
- for(idx = 0; idx < BOARD_COUNT; idx++) {
+ for (idx = 0; idx < BOARD_COUNT; idx++) {
port = &isi_ports[idx * 16];
isi_card[idx].ports = port;
spin_lock_init(&isi_card[idx].card_lock);
@@ -1832,7 +1827,7 @@ static int __init isicom_init(void)
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
/* . . . */
- }
+ }
isi_card[idx].base = 0;
isi_card[idx].irq = 0;
}
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index c645455c3fd..7c8b62f162b 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -1682,16 +1682,6 @@ static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cm
rc = 0;
switch (cmd) {
- case TIOCGSOFTCAR:
- rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
- (unsigned __user *) arg);
- break;
- case TIOCSSOFTCAR:
- if ((rc = get_user(ival, (unsigned __user *) arg)) == 0)
- tty->termios->c_cflag =
- (tty->termios->c_cflag & ~CLOCAL) |
- (ival ? CLOCAL : 0);
- break;
case TIOCGSERIAL:
rc = stli_getserial(portp, argp);
break;
@@ -3267,7 +3257,7 @@ static int stli_initecp(struct stlibrd *brdp)
*/
EBRDINIT(brdp);
- brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
+ brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
if (brdp->membase == NULL) {
retval = -ENOMEM;
goto err_reg;
@@ -3424,7 +3414,7 @@ static int stli_initonb(struct stlibrd *brdp)
*/
EBRDINIT(brdp);
- brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
+ brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
if (brdp->membase == NULL) {
retval = -ENOMEM;
goto err_reg;
@@ -3675,7 +3665,7 @@ static int stli_eisamemprobe(struct stlibrd *brdp)
*/
for (i = 0; (i < stli_eisamempsize); i++) {
brdp->memaddr = stli_eisamemprobeaddrs[i];
- brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
+ brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
if (brdp->membase == NULL)
continue;
@@ -4433,6 +4423,8 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un
done = 0;
rc = 0;
+ lock_kernel();
+
switch (cmd) {
case COM_GETPORTSTATS:
rc = stli_getportstats(NULL, argp);
@@ -4455,6 +4447,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un
done++;
break;
}
+ unlock_kernel();
if (done)
return rc;
@@ -4472,6 +4465,8 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un
if (brdp->state == 0)
return -ENODEV;
+ lock_kernel();
+
switch (cmd) {
case STL_BINTR:
EBRDINTR(brdp);
@@ -4494,6 +4489,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un
rc = -ENOIOCTLCMD;
break;
}
+ unlock_kernel();
return rc;
}
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 60b934adea6..7f7e798c138 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -110,6 +110,7 @@ const int max_vals[] = {
const int NR_TYPES = ARRAY_SIZE(max_vals);
struct kbd_struct kbd_table[MAX_NR_CONSOLES];
+EXPORT_SYMBOL_GPL(kbd_table);
static struct kbd_struct *kbd = kbd_table;
struct vt_spawn_console vt_spawn_con = {
@@ -260,6 +261,7 @@ void kd_mksound(unsigned int hz, unsigned int ticks)
} else
kd_nosound(0);
}
+EXPORT_SYMBOL(kd_mksound);
/*
* Setting the keyboard rate.
@@ -1230,7 +1232,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
if (rep &&
(!vc_kbd_mode(kbd, VC_REPEAT) ||
- (tty && !L_ECHO(tty) && tty->driver->chars_in_buffer(tty)))) {
+ (tty && !L_ECHO(tty) && tty_chars_in_buffer(tty)))) {
/*
* Don't repeat a key if the input buffers are not empty and the
* characters get aren't echoed locally. This makes key repeat
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index e83623ead44..934ffafedae 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -364,6 +364,7 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
return 0;
}
+#ifdef CONFIG_DEVKMEM
static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
{
unsigned long pfn;
@@ -384,6 +385,7 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
vma->vm_pgoff = pfn;
return mmap_mem(file, vma);
}
+#endif
#ifdef CONFIG_CRASH_DUMP
/*
@@ -422,6 +424,7 @@ static ssize_t read_oldmem(struct file *file, char __user *buf,
extern long vread(char *buf, char *addr, unsigned long count);
extern long vwrite(char *buf, char *addr, unsigned long count);
+#ifdef CONFIG_DEVKMEM
/*
* This function reads the *virtual* memory as seen by the kernel.
*/
@@ -626,6 +629,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf,
*ppos = p;
return virtr + wrote;
}
+#endif
#ifdef CONFIG_DEVPORT
static ssize_t read_port(struct file * file, char __user * buf,
@@ -803,6 +807,7 @@ static const struct file_operations mem_fops = {
.get_unmapped_area = get_unmapped_area_mem,
};
+#ifdef CONFIG_DEVKMEM
static const struct file_operations kmem_fops = {
.llseek = memory_lseek,
.read = read_kmem,
@@ -811,6 +816,7 @@ static const struct file_operations kmem_fops = {
.open = open_kmem,
.get_unmapped_area = get_unmapped_area_mem,
};
+#endif
static const struct file_operations null_fops = {
.llseek = null_lseek,
@@ -889,11 +895,13 @@ static int memory_open(struct inode * inode, struct file * filp)
filp->f_mapping->backing_dev_info =
&directly_mappable_cdev_bdi;
break;
+#ifdef CONFIG_DEVKMEM
case 2:
filp->f_op = &kmem_fops;
filp->f_mapping->backing_dev_info =
&directly_mappable_cdev_bdi;
break;
+#endif
case 3:
filp->f_op = &null_fops;
break;
@@ -942,7 +950,9 @@ static const struct {
const struct file_operations *fops;
} devlist[] = { /* list of minor devices */
{1, "mem", S_IRUSR | S_IWUSR | S_IRGRP, &mem_fops},
+#ifdef CONFIG_DEVKMEM
{2, "kmem", S_IRUSR | S_IWUSR | S_IRGRP, &kmem_fops},
+#endif
{3, "null", S_IRUGO | S_IWUGO, &null_fops},
#ifdef CONFIG_DEVPORT
{4, "port", S_IRUSR | S_IWUSR | S_IRGRP, &port_fops},
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index 4d058dadbfc..eaace0db0ff 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -263,23 +263,26 @@ EXPORT_SYMBOL(misc_deregister);
static int __init misc_init(void)
{
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *ent;
+ int err;
- ent = create_proc_entry("misc", 0, NULL);
- if (ent)
- ent->proc_fops = &misc_proc_fops;
+#ifdef CONFIG_PROC_FS
+ proc_create("misc", 0, NULL, &misc_proc_fops);
#endif
misc_class = class_create(THIS_MODULE, "misc");
+ err = PTR_ERR(misc_class);
if (IS_ERR(misc_class))
- return PTR_ERR(misc_class);
+ goto fail_remove;
- if (register_chrdev(MISC_MAJOR,"misc",&misc_fops)) {
- printk("unable to get major %d for misc devices\n",
- MISC_MAJOR);
- class_destroy(misc_class);
- return -EIO;
- }
+ err = -EIO;
+ if (register_chrdev(MISC_MAJOR,"misc",&misc_fops))
+ goto fail_printk;
return 0;
+
+fail_printk:
+ printk("unable to get major %d for misc devices\n", MISC_MAJOR);
+ class_destroy(misc_class);
+fail_remove:
+ remove_proc_entry("misc", NULL);
+ return err;
}
subsys_initcall(misc_init);
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index e60a74c66e3..192961fd717 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -30,6 +30,8 @@
#include <linux/miscdevice.h>
#include <linux/posix-timers.h>
#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/math64.h>
#include <asm/uaccess.h>
#include <asm/sn/addrs.h>
@@ -74,9 +76,8 @@ static const struct file_operations mmtimer_fops = {
* We only have comparison registers RTC1-4 currently available per
* node. RTC0 is used by SAL.
*/
-#define NUM_COMPARATORS 3
/* Check for an RTC interrupt pending */
-static int inline mmtimer_int_pending(int comparator)
+static int mmtimer_int_pending(int comparator)
{
if (HUB_L((unsigned long *)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED)) &
SH_EVENT_OCCURRED_RTC1_INT_MASK << comparator)
@@ -84,15 +85,16 @@ static int inline mmtimer_int_pending(int comparator)
else
return 0;
}
+
/* Clear the RTC interrupt pending bit */
-static void inline mmtimer_clr_int_pending(int comparator)
+static void mmtimer_clr_int_pending(int comparator)
{
HUB_S((u64 *)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
SH_EVENT_OCCURRED_RTC1_INT_MASK << comparator);
}
/* Setup timer on comparator RTC1 */
-static void inline mmtimer_setup_int_0(u64 expires)
+static void mmtimer_setup_int_0(int cpu, u64 expires)
{
u64 val;
@@ -106,7 +108,7 @@ static void inline mmtimer_setup_int_0(u64 expires)
mmtimer_clr_int_pending(0);
val = ((u64)SGI_MMTIMER_VECTOR << SH_RTC1_INT_CONFIG_IDX_SHFT) |
- ((u64)cpu_physical_id(smp_processor_id()) <<
+ ((u64)cpu_physical_id(cpu) <<
SH_RTC1_INT_CONFIG_PID_SHFT);
/* Set configuration */
@@ -122,7 +124,7 @@ static void inline mmtimer_setup_int_0(u64 expires)
}
/* Setup timer on comparator RTC2 */
-static void inline mmtimer_setup_int_1(u64 expires)
+static void mmtimer_setup_int_1(int cpu, u64 expires)
{
u64 val;
@@ -133,7 +135,7 @@ static void inline mmtimer_setup_int_1(u64 expires)
mmtimer_clr_int_pending(1);
val = ((u64)SGI_MMTIMER_VECTOR << SH_RTC2_INT_CONFIG_IDX_SHFT) |
- ((u64)cpu_physical_id(smp_processor_id()) <<
+ ((u64)cpu_physical_id(cpu) <<
SH_RTC2_INT_CONFIG_PID_SHFT);
HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC2_INT_CONFIG), val);
@@ -144,7 +146,7 @@ static void inline mmtimer_setup_int_1(u64 expires)
}
/* Setup timer on comparator RTC3 */
-static void inline mmtimer_setup_int_2(u64 expires)
+static void mmtimer_setup_int_2(int cpu, u64 expires)
{
u64 val;
@@ -155,7 +157,7 @@ static void inline mmtimer_setup_int_2(u64 expires)
mmtimer_clr_int_pending(2);
val = ((u64)SGI_MMTIMER_VECTOR << SH_RTC3_INT_CONFIG_IDX_SHFT) |
- ((u64)cpu_physical_id(smp_processor_id()) <<
+ ((u64)cpu_physical_id(cpu) <<
SH_RTC3_INT_CONFIG_PID_SHFT);
HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC3_INT_CONFIG), val);
@@ -170,22 +172,22 @@ static void inline mmtimer_setup_int_2(u64 expires)
* in order to insure that the setup succeeds in a deterministic time frame.
* It will check if the interrupt setup succeeded.
*/
-static int inline mmtimer_setup(int comparator, unsigned long expires)
+static int mmtimer_setup(int cpu, int comparator, unsigned long expires)
{
switch (comparator) {
case 0:
- mmtimer_setup_int_0(expires);
+ mmtimer_setup_int_0(cpu, expires);
break;
case 1:
- mmtimer_setup_int_1(expires);
+ mmtimer_setup_int_1(cpu, expires);
break;
case 2:
- mmtimer_setup_int_2(expires);
+ mmtimer_setup_int_2(cpu, expires);
break;
}
/* We might've missed our expiration time */
- if (rtc_time() < expires)
+ if (rtc_time() <= expires)
return 1;
/*
@@ -195,7 +197,7 @@ static int inline mmtimer_setup(int comparator, unsigned long expires)
return mmtimer_int_pending(comparator);
}
-static int inline mmtimer_disable_int(long nasid, int comparator)
+static int mmtimer_disable_int(long nasid, int comparator)
{
switch (comparator) {
case 0:
@@ -216,18 +218,124 @@ static int inline mmtimer_disable_int(long nasid, int comparator)
return 0;
}
-#define TIMER_OFF 0xbadcabLL
+#define COMPARATOR 1 /* The comparator to use */
-/* There is one of these for each comparator */
-typedef struct mmtimer {
- spinlock_t lock ____cacheline_aligned;
+#define TIMER_OFF 0xbadcabLL /* Timer is not setup */
+#define TIMER_SET 0 /* Comparator is set for this timer */
+
+/* There is one of these for each timer */
+struct mmtimer {
+ struct rb_node list;
struct k_itimer *timer;
- int i;
int cpu;
+};
+
+struct mmtimer_node {
+ spinlock_t lock ____cacheline_aligned;
+ struct rb_root timer_head;
+ struct rb_node *next;
struct tasklet_struct tasklet;
-} mmtimer_t;
+};
+static struct mmtimer_node *timers;
+
+
+/*
+ * Add a new mmtimer struct to the node's mmtimer list.
+ * This function assumes the struct mmtimer_node is locked.
+ */
+static void mmtimer_add_list(struct mmtimer *n)
+{
+ int nodeid = n->timer->it.mmtimer.node;
+ unsigned long expires = n->timer->it.mmtimer.expires;
+ struct rb_node **link = &timers[nodeid].timer_head.rb_node;
+ struct rb_node *parent = NULL;
+ struct mmtimer *x;
+
+ /*
+ * Find the right place in the rbtree:
+ */
+ while (*link) {
+ parent = *link;
+ x = rb_entry(parent, struct mmtimer, list);
+
+ if (expires < x->timer->it.mmtimer.expires)
+ link = &(*link)->rb_left;
+ else
+ link = &(*link)->rb_right;
+ }
+
+ /*
+ * Insert the timer to the rbtree and check whether it
+ * replaces the first pending timer
+ */
+ rb_link_node(&n->list, parent, link);
+ rb_insert_color(&n->list, &timers[nodeid].timer_head);
+
+ if (!timers[nodeid].next || expires < rb_entry(timers[nodeid].next,
+ struct mmtimer, list)->timer->it.mmtimer.expires)
+ timers[nodeid].next = &n->list;
+}
+
+/*
+ * Set the comparator for the next timer.
+ * This function assumes the struct mmtimer_node is locked.
+ */
+static void mmtimer_set_next_timer(int nodeid)
+{
+ struct mmtimer_node *n = &timers[nodeid];
+ struct mmtimer *x;
+ struct k_itimer *t;
+ int o;
+
+restart:
+ if (n->next == NULL)
+ return;
-static mmtimer_t ** timers;
+ x = rb_entry(n->next, struct mmtimer, list);
+ t = x->timer;
+ if (!t->it.mmtimer.incr) {
+ /* Not an interval timer */
+ if (!mmtimer_setup(x->cpu, COMPARATOR,
+ t->it.mmtimer.expires)) {
+ /* Late setup, fire now */
+ tasklet_schedule(&n->tasklet);
+ }
+ return;
+ }
+
+ /* Interval timer */
+ o = 0;
+ while (!mmtimer_setup(x->cpu, COMPARATOR, t->it.mmtimer.expires)) {
+ unsigned long e, e1;
+ struct rb_node *next;
+ t->it.mmtimer.expires += t->it.mmtimer.incr << o;
+ t->it_overrun += 1 << o;
+ o++;
+ if (o > 20) {
+ printk(KERN_ALERT "mmtimer: cannot reschedule timer\n");
+ t->it.mmtimer.clock = TIMER_OFF;
+ n->next = rb_next(&x->list);
+ rb_erase(&x->list, &n->timer_head);
+ kfree(x);
+ goto restart;
+ }
+
+ e = t->it.mmtimer.expires;
+ next = rb_next(&x->list);
+
+ if (next == NULL)
+ continue;
+
+ e1 = rb_entry(next, struct mmtimer, list)->
+ timer->it.mmtimer.expires;
+ if (e > e1) {
+ n->next = next;
+ rb_erase(&x->list, &n->timer_head);
+ mmtimer_add_list(x);
+ goto restart;
+ }
+ }
+}
/**
* mmtimer_ioctl - ioctl interface for /dev/mmtimer
@@ -366,8 +474,8 @@ static int sgi_clock_get(clockid_t clockid, struct timespec *tp)
nsec = rtc_time() * sgi_clock_period
+ sgi_clock_offset.tv_nsec;
- tp->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tp->tv_nsec)
- + sgi_clock_offset.tv_sec;
+ *tp = ns_to_timespec(nsec);
+ tp->tv_sec += sgi_clock_offset.tv_sec;
return 0;
};
@@ -375,11 +483,11 @@ static int sgi_clock_set(clockid_t clockid, struct timespec *tp)
{
u64 nsec;
- u64 rem;
+ u32 rem;
nsec = rtc_time() * sgi_clock_period;
- sgi_clock_offset.tv_sec = tp->tv_sec - div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+ sgi_clock_offset.tv_sec = tp->tv_sec - div_u64_rem(nsec, NSEC_PER_SEC, &rem);
if (rem <= tp->tv_nsec)
sgi_clock_offset.tv_nsec = tp->tv_sec - rem;
@@ -390,35 +498,6 @@ static int sgi_clock_set(clockid_t clockid, struct timespec *tp)
return 0;
}
-/*
- * Schedule the next periodic interrupt. This function will attempt
- * to schedule a periodic interrupt later if necessary. If the scheduling
- * of an interrupt fails then the time to skip is lengthened
- * exponentially in order to ensure that the next interrupt
- * can be properly scheduled..
- */
-static int inline reschedule_periodic_timer(mmtimer_t *x)
-{
- int n;
- struct k_itimer *t = x->timer;
-
- t->it.mmtimer.clock = x->i;
- t->it_overrun--;
-
- n = 0;
- do {
-
- t->it.mmtimer.expires += t->it.mmtimer.incr << n;
- t->it_overrun += 1 << n;
- n++;
- if (n > 20)
- return 1;
-
- } while (!mmtimer_setup(x->i, t->it.mmtimer.expires));
-
- return 0;
-}
-
/**
* mmtimer_interrupt - timer interrupt handler
* @irq: irq received
@@ -435,71 +514,75 @@ static int inline reschedule_periodic_timer(mmtimer_t *x)
static irqreturn_t
mmtimer_interrupt(int irq, void *dev_id)
{
- int i;
unsigned long expires = 0;
int result = IRQ_NONE;
unsigned indx = cpu_to_node(smp_processor_id());
+ struct mmtimer *base;
- /*
- * Do this once for each comparison register
- */
- for (i = 0; i < NUM_COMPARATORS; i++) {
- mmtimer_t *base = timers[indx] + i;
- /* Make sure this doesn't get reused before tasklet_sched */
- spin_lock(&base->lock);
- if (base->cpu == smp_processor_id()) {
- if (base->timer)
- expires = base->timer->it.mmtimer.expires;
- /* expires test won't work with shared irqs */
- if ((mmtimer_int_pending(i) > 0) ||
- (expires && (expires < rtc_time()))) {
- mmtimer_clr_int_pending(i);
- tasklet_schedule(&base->tasklet);
- result = IRQ_HANDLED;
- }
+ spin_lock(&timers[indx].lock);
+ base = rb_entry(timers[indx].next, struct mmtimer, list);
+ if (base == NULL) {
+ spin_unlock(&timers[indx].lock);
+ return result;
+ }
+
+ if (base->cpu == smp_processor_id()) {
+ if (base->timer)
+ expires = base->timer->it.mmtimer.expires;
+ /* expires test won't work with shared irqs */
+ if ((mmtimer_int_pending(COMPARATOR) > 0) ||
+ (expires && (expires <= rtc_time()))) {
+ mmtimer_clr_int_pending(COMPARATOR);
+ tasklet_schedule(&timers[indx].tasklet);
+ result = IRQ_HANDLED;
}
- spin_unlock(&base->lock);
- expires = 0;
}
+ spin_unlock(&timers[indx].lock);
return result;
}
-void mmtimer_tasklet(unsigned long data) {
- mmtimer_t *x = (mmtimer_t *)data;
- struct k_itimer *t = x->timer;
+static void mmtimer_tasklet(unsigned long data)
+{
+ int nodeid = data;
+ struct mmtimer_node *mn = &timers[nodeid];
+ struct mmtimer *x = rb_entry(mn->next, struct mmtimer, list);
+ struct k_itimer *t;
unsigned long flags;
- if (t == NULL)
- return;
-
/* Send signal and deal with periodic signals */
- spin_lock_irqsave(&t->it_lock, flags);
- spin_lock(&x->lock);
- /* If timer was deleted between interrupt and here, leave */
- if (t != x->timer)
+ spin_lock_irqsave(&mn->lock, flags);
+ if (!mn->next)
goto out;
- t->it_overrun = 0;
- if (posix_timer_event(t, 0) != 0) {
+ x = rb_entry(mn->next, struct mmtimer, list);
+ t = x->timer;
+
+ if (t->it.mmtimer.clock == TIMER_OFF)
+ goto out;
+
+ t->it_overrun = 0;
- // printk(KERN_WARNING "mmtimer: cannot deliver signal.\n");
+ mn->next = rb_next(&x->list);
+ rb_erase(&x->list, &mn->timer_head);
+ if (posix_timer_event(t, 0) != 0)
t->it_overrun++;
- }
+
if(t->it.mmtimer.incr) {
- /* Periodic timer */
- if (reschedule_periodic_timer(x)) {
- printk(KERN_WARNING "mmtimer: unable to reschedule\n");
- x->timer = NULL;
- }
+ t->it.mmtimer.expires += t->it.mmtimer.incr;
+ mmtimer_add_list(x);
} else {
/* Ensure we don't false trigger in mmtimer_interrupt */
+ t->it.mmtimer.clock = TIMER_OFF;
t->it.mmtimer.expires = 0;
+ kfree(x);
}
+ /* Set comparator for next timer, if there is one */
+ mmtimer_set_next_timer(nodeid);
+
t->it_overrun_last = t->it_overrun;
out:
- spin_unlock(&x->lock);
- spin_unlock_irqrestore(&t->it_lock, flags);
+ spin_unlock_irqrestore(&mn->lock, flags);
}
static int sgi_timer_create(struct k_itimer *timer)
@@ -516,25 +599,53 @@ static int sgi_timer_create(struct k_itimer *timer)
*/
static int sgi_timer_del(struct k_itimer *timr)
{
- int i = timr->it.mmtimer.clock;
cnodeid_t nodeid = timr->it.mmtimer.node;
- mmtimer_t *t = timers[nodeid] + i;
unsigned long irqflags;
- if (i != TIMER_OFF) {
- spin_lock_irqsave(&t->lock, irqflags);
- mmtimer_disable_int(cnodeid_to_nasid(nodeid),i);
- t->timer = NULL;
+ spin_lock_irqsave(&timers[nodeid].lock, irqflags);
+ if (timr->it.mmtimer.clock != TIMER_OFF) {
+ unsigned long expires = timr->it.mmtimer.expires;
+ struct rb_node *n = timers[nodeid].timer_head.rb_node;
+ struct mmtimer *uninitialized_var(t);
+ int r = 0;
+
timr->it.mmtimer.clock = TIMER_OFF;
timr->it.mmtimer.expires = 0;
- spin_unlock_irqrestore(&t->lock, irqflags);
+
+ while (n) {
+ t = rb_entry(n, struct mmtimer, list);
+ if (t->timer == timr)
+ break;
+
+ if (expires < t->timer->it.mmtimer.expires)
+ n = n->rb_left;
+ else
+ n = n->rb_right;
+ }
+
+ if (!n) {
+ spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
+ return 0;
+ }
+
+ if (timers[nodeid].next == n) {
+ timers[nodeid].next = rb_next(n);
+ r = 1;
+ }
+
+ rb_erase(n, &timers[nodeid].timer_head);
+ kfree(t);
+
+ if (r) {
+ mmtimer_disable_int(cnodeid_to_nasid(nodeid),
+ COMPARATOR);
+ mmtimer_set_next_timer(nodeid);
+ }
}
+ spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
return 0;
}
-#define timespec_to_ns(x) ((x).tv_nsec + (x).tv_sec * NSEC_PER_SEC)
-#define ns_to_timespec(ts, nsec) (ts).tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &(ts).tv_nsec)
-
/* Assumption: it_lock is already held with irq's disabled */
static void sgi_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
{
@@ -547,9 +658,8 @@ static void sgi_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
return;
}
- ns_to_timespec(cur_setting->it_interval, timr->it.mmtimer.incr * sgi_clock_period);
- ns_to_timespec(cur_setting->it_value, (timr->it.mmtimer.expires - rtc_time())* sgi_clock_period);
- return;
+ cur_setting->it_interval = ns_to_timespec(timr->it.mmtimer.incr * sgi_clock_period);
+ cur_setting->it_value = ns_to_timespec((timr->it.mmtimer.expires - rtc_time()) * sgi_clock_period);
}
@@ -557,30 +667,33 @@ static int sgi_timer_set(struct k_itimer *timr, int flags,
struct itimerspec * new_setting,
struct itimerspec * old_setting)
{
-
- int i;
unsigned long when, period, irqflags;
int err = 0;
cnodeid_t nodeid;
- mmtimer_t *base;
+ struct mmtimer *base;
+ struct rb_node *n;
if (old_setting)
sgi_timer_get(timr, old_setting);
sgi_timer_del(timr);
- when = timespec_to_ns(new_setting->it_value);
- period = timespec_to_ns(new_setting->it_interval);
+ when = timespec_to_ns(&new_setting->it_value);
+ period = timespec_to_ns(&new_setting->it_interval);
if (when == 0)
/* Clear timer */
return 0;
+ base = kmalloc(sizeof(struct mmtimer), GFP_KERNEL);
+ if (base == NULL)
+ return -ENOMEM;
+
if (flags & TIMER_ABSTIME) {
struct timespec n;
unsigned long now;
getnstimeofday(&n);
- now = timespec_to_ns(n);
+ now = timespec_to_ns(&n);
if (when > now)
when -= now;
else
@@ -604,47 +717,38 @@ static int sgi_timer_set(struct k_itimer *timr, int flags,
preempt_disable();
nodeid = cpu_to_node(smp_processor_id());
-retry:
- /* Don't use an allocated timer, or a deleted one that's pending */
- for(i = 0; i< NUM_COMPARATORS; i++) {
- base = timers[nodeid] + i;
- if (!base->timer && !base->tasklet.state) {
- break;
- }
- }
-
- if (i == NUM_COMPARATORS) {
- preempt_enable();
- return -EBUSY;
- }
- spin_lock_irqsave(&base->lock, irqflags);
+ /* Lock the node timer structure */
+ spin_lock_irqsave(&timers[nodeid].lock, irqflags);
- if (base->timer || base->tasklet.state != 0) {
- spin_unlock_irqrestore(&base->lock, irqflags);
- goto retry;
- }
base->timer = timr;
base->cpu = smp_processor_id();
- timr->it.mmtimer.clock = i;
+ timr->it.mmtimer.clock = TIMER_SET;
timr->it.mmtimer.node = nodeid;
timr->it.mmtimer.incr = period;
timr->it.mmtimer.expires = when;
- if (period == 0) {
- if (!mmtimer_setup(i, when)) {
- mmtimer_disable_int(-1, i);
- posix_timer_event(timr, 0);
- timr->it.mmtimer.expires = 0;
- }
- } else {
- timr->it.mmtimer.expires -= period;
- if (reschedule_periodic_timer(base))
- err = -EINVAL;
+ n = timers[nodeid].next;
+
+ /* Add the new struct mmtimer to node's timer list */
+ mmtimer_add_list(base);
+
+ if (timers[nodeid].next == n) {
+ /* No need to reprogram comparator for now */
+ spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
+ preempt_enable();
+ return err;
}
- spin_unlock_irqrestore(&base->lock, irqflags);
+ /* We need to reprogram the comparator */
+ if (n)
+ mmtimer_disable_int(cnodeid_to_nasid(nodeid), COMPARATOR);
+
+ mmtimer_set_next_timer(nodeid);
+
+ /* Unlock the node timer structure */
+ spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
preempt_enable();
@@ -669,7 +773,6 @@ static struct k_clock sgi_clock = {
*/
static int __init mmtimer_init(void)
{
- unsigned i;
cnodeid_t node, maxn = -1;
if (!ia64_platform_is("sn2"))
@@ -706,31 +809,18 @@ static int __init mmtimer_init(void)
maxn++;
/* Allocate list of node ptrs to mmtimer_t's */
- timers = kzalloc(sizeof(mmtimer_t *)*maxn, GFP_KERNEL);
+ timers = kzalloc(sizeof(struct mmtimer_node)*maxn, GFP_KERNEL);
if (timers == NULL) {
printk(KERN_ERR "%s: failed to allocate memory for device\n",
MMTIMER_NAME);
goto out3;
}
- /* Allocate mmtimer_t's for each online node */
+ /* Initialize struct mmtimer's for each online node */
for_each_online_node(node) {
- timers[node] = kmalloc_node(sizeof(mmtimer_t)*NUM_COMPARATORS, GFP_KERNEL, node);
- if (timers[node] == NULL) {
- printk(KERN_ERR "%s: failed to allocate memory for device\n",
- MMTIMER_NAME);
- goto out4;
- }
- for (i=0; i< NUM_COMPARATORS; i++) {
- mmtimer_t * base = timers[node] + i;
-
- spin_lock_init(&base->lock);
- base->timer = NULL;
- base->cpu = 0;
- base->i = i;
- tasklet_init(&base->tasklet, mmtimer_tasklet,
- (unsigned long) (base));
- }
+ spin_lock_init(&timers[node].lock);
+ tasklet_init(&timers[node].tasklet, mmtimer_tasklet,
+ (unsigned long) node);
}
sgi_clock_period = sgi_clock.res = NSEC_PER_SEC / sn_rtc_cycles_per_second;
@@ -741,11 +831,8 @@ static int __init mmtimer_init(void)
return 0;
-out4:
- for_each_online_node(node) {
- kfree(timers[node]);
- }
out3:
+ kfree(timers);
misc_deregister(&mmtimer_miscdev);
out2:
free_irq(SGI_MMTIMER_VECTOR, NULL);
@@ -754,4 +841,3 @@ out1:
}
module_init(mmtimer_init);
-
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 64b7b2b1835..d57d3a61919 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -2,7 +2,8 @@
/*
* moxa.c -- MOXA Intellio family multiport serial driver.
*
- * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com.tw).
+ * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com).
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
*
* This code is loosely based on the Linux serial driver, written by
* Linus Torvalds, Theodore T'so and others.
@@ -25,6 +26,7 @@
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/errno.h>
+#include <linux/firmware.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
@@ -41,21 +43,26 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
-#include <linux/completion.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#define MOXA_VERSION "5.1k"
+#include "moxa.h"
+
+#define MOXA_VERSION "6.0k"
+
+#define MOXA_FW_HDRLEN 32
#define MOXAMAJOR 172
-#define MOXACUMAJOR 173
#define MAX_BOARDS 4 /* Don't change this value */
#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
+#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
+ (brd)->boardType == MOXA_BOARD_C320_PCI)
+
/*
* Define the Moxa PCI vendor and device IDs.
*/
@@ -92,24 +99,16 @@ static struct pci_device_id moxa_pcibrds[] = {
MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
#endif /* CONFIG_PCI */
-struct moxa_isa_board_conf {
- int boardType;
- int numPorts;
- unsigned long baseAddr;
-};
-
-static struct moxa_isa_board_conf moxa_isa_boards[] =
-{
-/* {MOXA_BOARD_C218_ISA,8,0xDC000}, */
-};
+struct moxa_port;
static struct moxa_board_conf {
int boardType;
int numPorts;
- unsigned long baseAddr;
int busType;
- int loadstat;
+ unsigned int ready;
+
+ struct moxa_port *ports;
void __iomem *basemem;
void __iomem *intNdx;
@@ -131,30 +130,27 @@ struct moxaq_str {
};
struct moxa_port {
+ struct moxa_board_conf *board;
+ struct tty_struct *tty;
+ void __iomem *tableAddr;
+
int type;
- int port;
int close_delay;
- unsigned short closing_wait;
- int count;
- int blocked_open;
- long event; /* long req'd for set_bit --RR */
+ unsigned int count;
int asyncflags;
- unsigned long statusflags;
- struct tty_struct *tty;
int cflag;
+ unsigned long statusflags;
wait_queue_head_t open_wait;
- struct completion close_wait;
-
- struct timer_list emptyTimer;
- char chkPort;
- char lineCtrl;
- void __iomem *tableAddr;
- long curBaud;
- char DCDState;
- char lowChkFlag;
+ u8 DCDState;
+ u8 lineCtrl;
+ u8 lowChkFlag;
+};
- ushort breakCnt;
+struct mon_str {
+ int tick;
+ int rxcnt[MAX_PORTS];
+ int txcnt[MAX_PORTS];
};
/* statusflags */
@@ -168,20 +164,27 @@ struct moxa_port {
#define WAKEUP_CHARS 256
static int ttymajor = MOXAMAJOR;
+static struct mon_str moxaLog;
+static unsigned int moxaFuncTout = HZ / 2;
+static unsigned int moxaLowWaterChk;
+static DEFINE_MUTEX(moxa_openlock);
/* Variables for insmod */
#ifdef MODULE
-static int baseaddr[4];
-static int type[4];
-static int numports[4];
+static unsigned long baseaddr[MAX_BOARDS];
+static unsigned int type[MAX_BOARDS];
+static unsigned int numports[MAX_BOARDS];
#endif
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
MODULE_LICENSE("GPL");
#ifdef MODULE
-module_param_array(type, int, NULL, 0);
-module_param_array(baseaddr, int, NULL, 0);
-module_param_array(numports, int, NULL, 0);
+module_param_array(type, uint, NULL, 0);
+MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
+module_param_array(baseaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(baseaddr, "base address");
+module_param_array(numports, uint, NULL, 0);
+MODULE_PARM_DESC(numports, "numports (ignored for C218)");
#endif
module_param(ttymajor, int, 0);
@@ -194,9 +197,6 @@ static int moxa_write(struct tty_struct *, const unsigned char *, int);
static int moxa_write_room(struct tty_struct *);
static void moxa_flush_buffer(struct tty_struct *);
static int moxa_chars_in_buffer(struct tty_struct *);
-static void moxa_flush_chars(struct tty_struct *);
-static void moxa_put_char(struct tty_struct *, unsigned char);
-static int moxa_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long);
static void moxa_throttle(struct tty_struct *);
static void moxa_unthrottle(struct tty_struct *);
static void moxa_set_termios(struct tty_struct *, struct ktermios *);
@@ -208,44 +208,183 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static void moxa_poll(unsigned long);
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
-static int moxa_block_till_ready(struct tty_struct *, struct file *,
- struct moxa_port *);
static void moxa_setup_empty_event(struct tty_struct *);
-static void moxa_check_xmit_empty(unsigned long);
static void moxa_shut_down(struct moxa_port *);
-static void moxa_receive_data(struct moxa_port *);
/*
* moxa board interface functions:
*/
-static void MoxaDriverInit(void);
-static int MoxaDriverIoctl(unsigned int, unsigned long, int);
-static int MoxaDriverPoll(void);
-static int MoxaPortsOfCard(int);
-static int MoxaPortIsValid(int);
-static void MoxaPortEnable(int);
-static void MoxaPortDisable(int);
-static long MoxaPortGetMaxBaud(int);
-static long MoxaPortSetBaud(int, long);
-static int MoxaPortSetTermio(int, struct ktermios *, speed_t);
-static int MoxaPortGetLineOut(int, int *, int *);
-static void MoxaPortLineCtrl(int, int, int);
-static void MoxaPortFlowCtrl(int, int, int, int, int, int);
-static int MoxaPortLineStatus(int);
-static int MoxaPortDCDChange(int);
-static int MoxaPortDCDON(int);
-static void MoxaPortFlushData(int, int);
-static int MoxaPortWriteData(int, unsigned char *, int);
-static int MoxaPortReadData(int, struct tty_struct *tty);
-static int MoxaPortTxQueue(int);
-static int MoxaPortRxQueue(int);
-static int MoxaPortTxFree(int);
-static void MoxaPortTxDisable(int);
-static void MoxaPortTxEnable(int);
-static int MoxaPortResetBrkCnt(int);
-static void MoxaPortSendBreak(int, int);
+static void MoxaPortEnable(struct moxa_port *);
+static void MoxaPortDisable(struct moxa_port *);
+static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
+static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
+static void MoxaPortLineCtrl(struct moxa_port *, int, int);
+static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
+static int MoxaPortLineStatus(struct moxa_port *);
+static void MoxaPortFlushData(struct moxa_port *, int);
+static int MoxaPortWriteData(struct moxa_port *, const unsigned char *, int);
+static int MoxaPortReadData(struct moxa_port *);
+static int MoxaPortTxQueue(struct moxa_port *);
+static int MoxaPortRxQueue(struct moxa_port *);
+static int MoxaPortTxFree(struct moxa_port *);
+static void MoxaPortTxDisable(struct moxa_port *);
+static void MoxaPortTxEnable(struct moxa_port *);
static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
-static void MoxaSetFifo(int port, int enable);
+static void MoxaSetFifo(struct moxa_port *port, int enable);
+
+/*
+ * I/O functions
+ */
+
+static void moxa_wait_finish(void __iomem *ofsAddr)
+{
+ unsigned long end = jiffies + moxaFuncTout;
+
+ while (readw(ofsAddr + FuncCode) != 0)
+ if (time_after(jiffies, end))
+ return;
+ if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit())
+ printk(KERN_WARNING "moxa function expired\n");
+}
+
+static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
+{
+ writew(arg, ofsAddr + FuncArg);
+ writew(cmd, ofsAddr + FuncCode);
+ moxa_wait_finish(ofsAddr);
+}
+
+static void moxa_low_water_check(void __iomem *ofsAddr)
+{
+ u16 rptr, wptr, mask, len;
+
+ if (readb(ofsAddr + FlagStat) & Xoff_state) {
+ rptr = readw(ofsAddr + RXrptr);
+ wptr = readw(ofsAddr + RXwptr);
+ mask = readw(ofsAddr + RX_mask);
+ len = (wptr - rptr) & mask;
+ if (len <= Low_water)
+ moxafunc(ofsAddr, FC_SendXon, 0);
+ }
+}
+
+/*
+ * TTY operations
+ */
+
+static int moxa_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct moxa_port *ch = tty->driver_data;
+ void __user *argp = (void __user *)arg;
+ int status, ret = 0;
+
+ if (tty->index == MAX_PORTS) {
+ if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
+ cmd != MOXA_GETMSTATUS)
+ return -EINVAL;
+ } else if (!ch)
+ return -ENODEV;
+
+ switch (cmd) {
+ case MOXA_GETDATACOUNT:
+ moxaLog.tick = jiffies;
+ if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
+ ret = -EFAULT;
+ break;
+ case MOXA_FLUSH_QUEUE:
+ MoxaPortFlushData(ch, arg);
+ break;
+ case MOXA_GET_IOQUEUE: {
+ struct moxaq_str __user *argm = argp;
+ struct moxaq_str tmp;
+ struct moxa_port *p;
+ unsigned int i, j;
+
+ mutex_lock(&moxa_openlock);
+ for (i = 0; i < MAX_BOARDS; i++) {
+ p = moxa_boards[i].ports;
+ for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+ memset(&tmp, 0, sizeof(tmp));
+ if (moxa_boards[i].ready) {
+ tmp.inq = MoxaPortRxQueue(p);
+ tmp.outq = MoxaPortTxQueue(p);
+ }
+ if (copy_to_user(argm, &tmp, sizeof(tmp))) {
+ mutex_unlock(&moxa_openlock);
+ return -EFAULT;
+ }
+ }
+ }
+ mutex_unlock(&moxa_openlock);
+ break;
+ } case MOXA_GET_OQUEUE:
+ status = MoxaPortTxQueue(ch);
+ ret = put_user(status, (unsigned long __user *)argp);
+ break;
+ case MOXA_GET_IQUEUE:
+ status = MoxaPortRxQueue(ch);
+ ret = put_user(status, (unsigned long __user *)argp);
+ break;
+ case MOXA_GETMSTATUS: {
+ struct mxser_mstatus __user *argm = argp;
+ struct mxser_mstatus tmp;
+ struct moxa_port *p;
+ unsigned int i, j;
+
+ mutex_lock(&moxa_openlock);
+ for (i = 0; i < MAX_BOARDS; i++) {
+ p = moxa_boards[i].ports;
+ for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+ memset(&tmp, 0, sizeof(tmp));
+ if (!moxa_boards[i].ready)
+ goto copy;
+
+ status = MoxaPortLineStatus(p);
+ if (status & 1)
+ tmp.cts = 1;
+ if (status & 2)
+ tmp.dsr = 1;
+ if (status & 4)
+ tmp.dcd = 1;
+
+ if (!p->tty || !p->tty->termios)
+ tmp.cflag = p->cflag;
+ else
+ tmp.cflag = p->tty->termios->c_cflag;
+copy:
+ if (copy_to_user(argm, &tmp, sizeof(tmp))) {
+ mutex_unlock(&moxa_openlock);
+ return -EFAULT;
+ }
+ }
+ }
+ mutex_unlock(&moxa_openlock);
+ break;
+ }
+ case TIOCGSERIAL:
+ mutex_lock(&moxa_openlock);
+ ret = moxa_get_serial_info(ch, argp);
+ mutex_unlock(&moxa_openlock);
+ break;
+ case TIOCSSERIAL:
+ mutex_lock(&moxa_openlock);
+ ret = moxa_set_serial_info(ch, argp);
+ mutex_unlock(&moxa_openlock);
+ break;
+ default:
+ ret = -ENOIOCTLCMD;
+ }
+ return ret;
+}
+
+static void moxa_break_ctl(struct tty_struct *tty, int state)
+{
+ struct moxa_port *port = tty->driver_data;
+
+ moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
+ Magic_code);
+}
static const struct tty_operations moxa_ops = {
.open = moxa_open,
@@ -254,8 +393,6 @@ static const struct tty_operations moxa_ops = {
.write_room = moxa_write_room,
.flush_buffer = moxa_flush_buffer,
.chars_in_buffer = moxa_chars_in_buffer,
- .flush_chars = moxa_flush_chars,
- .put_char = moxa_put_char,
.ioctl = moxa_ioctl,
.throttle = moxa_throttle,
.unthrottle = moxa_unthrottle,
@@ -263,15 +400,509 @@ static const struct tty_operations moxa_ops = {
.stop = moxa_stop,
.start = moxa_start,
.hangup = moxa_hangup,
+ .break_ctl = moxa_break_ctl,
.tiocmget = moxa_tiocmget,
.tiocmset = moxa_tiocmset,
};
static struct tty_driver *moxaDriver;
-static struct moxa_port moxa_ports[MAX_PORTS];
static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
static DEFINE_SPINLOCK(moxa_lock);
+/*
+ * HW init
+ */
+
+static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
+{
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ if (model != 1)
+ goto err;
+ break;
+ case MOXA_BOARD_CP204J:
+ if (model != 3)
+ goto err;
+ break;
+ default:
+ if (model != 2)
+ goto err;
+ break;
+ }
+ return 0;
+err:
+ return -EINVAL;
+}
+
+static int moxa_check_fw(const void *ptr)
+{
+ const __le16 *lptr = ptr;
+
+ if (*lptr != cpu_to_le16(0x7980))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
+ size_t len)
+{
+ void __iomem *baseAddr = brd->basemem;
+ u16 tmp;
+
+ writeb(HW_reset, baseAddr + Control_reg); /* reset */
+ msleep(10);
+ memset_io(baseAddr, 0, 4096);
+ memcpy_toio(baseAddr, buf, len); /* download BIOS */
+ writeb(0, baseAddr + Control_reg); /* restart */
+
+ msleep(2000);
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ tmp = readw(baseAddr + C218_key);
+ if (tmp != C218_KeyCode)
+ goto err;
+ break;
+ case MOXA_BOARD_CP204J:
+ tmp = readw(baseAddr + C218_key);
+ if (tmp != CP204J_KeyCode)
+ goto err;
+ break;
+ default:
+ tmp = readw(baseAddr + C320_key);
+ if (tmp != C320_KeyCode)
+ goto err;
+ tmp = readw(baseAddr + C320_status);
+ if (tmp != STS_init) {
+ printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
+ "module not found\n");
+ return -EIO;
+ }
+ break;
+ }
+
+ return 0;
+err:
+ printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
+ return -EIO;
+}
+
+static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
+ size_t len)
+{
+ void __iomem *baseAddr = brd->basemem;
+
+ if (len < 7168) {
+ printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
+ return -EINVAL;
+ }
+
+ writew(len - 7168 - 2, baseAddr + C320bapi_len);
+ writeb(1, baseAddr + Control_reg); /* Select Page 1 */
+ memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
+ writeb(2, baseAddr + Control_reg); /* Select Page 2 */
+ memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
+
+ return 0;
+}
+
+static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
+ size_t len)
+{
+ void __iomem *baseAddr = brd->basemem;
+ const u16 *uptr = ptr;
+ size_t wlen, len2, j;
+ unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
+ unsigned int i, retry;
+ u16 usum, keycode;
+
+ keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
+ C218_KeyCode;
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_CP204J:
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ key = C218_key;
+ loadbuf = C218_LoadBuf;
+ loadlen = C218DLoad_len;
+ checksum = C218check_sum;
+ checksum_ok = C218chksum_ok;
+ break;
+ default:
+ key = C320_key;
+ keycode = C320_KeyCode;
+ loadbuf = C320_LoadBuf;
+ loadlen = C320DLoad_len;
+ checksum = C320check_sum;
+ checksum_ok = C320chksum_ok;
+ break;
+ }
+
+ usum = 0;
+ wlen = len >> 1;
+ for (i = 0; i < wlen; i++)
+ usum += le16_to_cpu(uptr[i]);
+ retry = 0;
+ do {
+ wlen = len >> 1;
+ j = 0;
+ while (wlen) {
+ len2 = (wlen > 2048) ? 2048 : wlen;
+ wlen -= len2;
+ memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
+ j += len2 << 1;
+
+ writew(len2, baseAddr + loadlen);
+ writew(0, baseAddr + key);
+ for (i = 0; i < 100; i++) {
+ if (readw(baseAddr + key) == keycode)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + key) != keycode)
+ return -EIO;
+ }
+ writew(0, baseAddr + loadlen);
+ writew(usum, baseAddr + checksum);
+ writew(0, baseAddr + key);
+ for (i = 0; i < 100; i++) {
+ if (readw(baseAddr + key) == keycode)
+ break;
+ msleep(10);
+ }
+ retry++;
+ } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
+ if (readb(baseAddr + checksum_ok) != 1)
+ return -EIO;
+
+ writew(0, baseAddr + key);
+ for (i = 0; i < 600; i++) {
+ if (readw(baseAddr + Magic_no) == Magic_code)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + Magic_no) != Magic_code)
+ return -EIO;
+
+ if (MOXA_IS_320(brd)) {
+ if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
+ writew(0x3800, baseAddr + TMS320_PORT1);
+ writew(0x3900, baseAddr + TMS320_PORT2);
+ writew(28499, baseAddr + TMS320_CLOCK);
+ } else {
+ writew(0x3200, baseAddr + TMS320_PORT1);
+ writew(0x3400, baseAddr + TMS320_PORT2);
+ writew(19999, baseAddr + TMS320_CLOCK);
+ }
+ }
+ writew(1, baseAddr + Disable_IRQ);
+ writew(0, baseAddr + Magic_no);
+ for (i = 0; i < 500; i++) {
+ if (readw(baseAddr + Magic_no) == Magic_code)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + Magic_no) != Magic_code)
+ return -EIO;
+
+ if (MOXA_IS_320(brd)) {
+ j = readw(baseAddr + Module_cnt);
+ if (j <= 0)
+ return -EIO;
+ brd->numPorts = j * 8;
+ writew(j, baseAddr + Module_no);
+ writew(0, baseAddr + Magic_no);
+ for (i = 0; i < 600; i++) {
+ if (readw(baseAddr + Magic_no) == Magic_code)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + Magic_no) != Magic_code)
+ return -EIO;
+ }
+ brd->intNdx = baseAddr + IRQindex;
+ brd->intPend = baseAddr + IRQpending;
+ brd->intTable = baseAddr + IRQtable;
+
+ return 0;
+}
+
+static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
+ size_t len)
+{
+ void __iomem *ofsAddr, *baseAddr = brd->basemem;
+ struct moxa_port *port;
+ int retval, i;
+
+ if (len % 2) {
+ printk(KERN_ERR "MOXA: bios length is not even\n");
+ return -EINVAL;
+ }
+
+ retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
+ if (retval)
+ return retval;
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ case MOXA_BOARD_CP204J:
+ port = brd->ports;
+ for (i = 0; i < brd->numPorts; i++, port++) {
+ port->board = brd;
+ port->DCDState = 0;
+ port->tableAddr = baseAddr + Extern_table +
+ Extern_size * i;
+ ofsAddr = port->tableAddr;
+ writew(C218rx_mask, ofsAddr + RX_mask);
+ writew(C218tx_mask, ofsAddr + TX_mask);
+ writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
+
+ writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
+
+ }
+ break;
+ default:
+ port = brd->ports;
+ for (i = 0; i < brd->numPorts; i++, port++) {
+ port->board = brd;
+ port->DCDState = 0;
+ port->tableAddr = baseAddr + Extern_table +
+ Extern_size * i;
+ ofsAddr = port->tableAddr;
+ switch (brd->numPorts) {
+ case 8:
+ writew(C320p8rx_mask, ofsAddr + RX_mask);
+ writew(C320p8tx_mask, ofsAddr + TX_mask);
+ writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
+ writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
+
+ break;
+ case 16:
+ writew(C320p16rx_mask, ofsAddr + RX_mask);
+ writew(C320p16tx_mask, ofsAddr + TX_mask);
+ writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
+ writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
+ break;
+
+ case 24:
+ writew(C320p24rx_mask, ofsAddr + RX_mask);
+ writew(C320p24tx_mask, ofsAddr + TX_mask);
+ writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
+ writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+ break;
+ case 32:
+ writew(C320p32rx_mask, ofsAddr + RX_mask);
+ writew(C320p32tx_mask, ofsAddr + TX_mask);
+ writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
+ writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
+ writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
+ writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+ break;
+ }
+ }
+ break;
+ }
+ return 0;
+}
+
+static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
+{
+ void *ptr = fw->data;
+ char rsn[64];
+ u16 lens[5];
+ size_t len;
+ unsigned int a, lenp, lencnt;
+ int ret = -EINVAL;
+ struct {
+ __le32 magic; /* 0x34303430 */
+ u8 reserved1[2];
+ u8 type; /* UNIX = 3 */
+ u8 model; /* C218T=1, C320T=2, CP204=3 */
+ u8 reserved2[8];
+ __le16 len[5];
+ } *hdr = ptr;
+
+ BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
+
+ if (fw->size < MOXA_FW_HDRLEN) {
+ strcpy(rsn, "too short (even header won't fit)");
+ goto err;
+ }
+ if (hdr->magic != cpu_to_le32(0x30343034)) {
+ sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
+ goto err;
+ }
+ if (hdr->type != 3) {
+ sprintf(rsn, "not for linux, type is %u", hdr->type);
+ goto err;
+ }
+ if (moxa_check_fw_model(brd, hdr->model)) {
+ sprintf(rsn, "not for this card, model is %u", hdr->model);
+ goto err;
+ }
+
+ len = MOXA_FW_HDRLEN;
+ lencnt = hdr->model == 2 ? 5 : 3;
+ for (a = 0; a < ARRAY_SIZE(lens); a++) {
+ lens[a] = le16_to_cpu(hdr->len[a]);
+ if (lens[a] && len + lens[a] <= fw->size &&
+ moxa_check_fw(&fw->data[len]))
+ printk(KERN_WARNING "MOXA firmware: unexpected input "
+ "at offset %u, but going on\n", (u32)len);
+ if (!lens[a] && a < lencnt) {
+ sprintf(rsn, "too few entries in fw file");
+ goto err;
+ }
+ len += lens[a];
+ }
+
+ if (len != fw->size) {
+ sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
+ (u32)len);
+ goto err;
+ }
+
+ ptr += MOXA_FW_HDRLEN;
+ lenp = 0; /* bios */
+
+ strcpy(rsn, "read above");
+
+ ret = moxa_load_bios(brd, ptr, lens[lenp]);
+ if (ret)
+ goto err;
+
+ /* we skip the tty section (lens[1]), since we don't need it */
+ ptr += lens[lenp] + lens[lenp + 1];
+ lenp += 2; /* comm */
+
+ if (hdr->model == 2) {
+ ret = moxa_load_320b(brd, ptr, lens[lenp]);
+ if (ret)
+ goto err;
+ /* skip another tty */
+ ptr += lens[lenp] + lens[lenp + 1];
+ lenp += 2;
+ }
+
+ ret = moxa_load_code(brd, ptr, lens[lenp]);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
+ return ret;
+}
+
+static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
+{
+ const struct firmware *fw;
+ const char *file;
+ struct moxa_port *p;
+ unsigned int i;
+ int ret;
+
+ brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
+ GFP_KERNEL);
+ if (brd->ports == NULL) {
+ printk(KERN_ERR "cannot allocate memory for ports\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
+ p->type = PORT_16550A;
+ p->close_delay = 5 * HZ / 10;
+ p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
+ init_waitqueue_head(&p->open_wait);
+ }
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ file = "c218tunx.cod";
+ break;
+ case MOXA_BOARD_CP204J:
+ file = "cp204unx.cod";
+ break;
+ default:
+ file = "c320tunx.cod";
+ break;
+ }
+
+ ret = request_firmware(&fw, file, dev);
+ if (ret) {
+ printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
+ "you've placed '%s' file into your firmware "
+ "loader directory (e.g. /lib/firmware)\n",
+ file);
+ goto err_free;
+ }
+
+ ret = moxa_load_fw(brd, fw);
+
+ release_firmware(fw);
+
+ if (ret)
+ goto err_free;
+
+ spin_lock_bh(&moxa_lock);
+ brd->ready = 1;
+ if (!timer_pending(&moxaTimer))
+ mod_timer(&moxaTimer, jiffies + HZ / 50);
+ spin_unlock_bh(&moxa_lock);
+
+ return 0;
+err_free:
+ kfree(brd->ports);
+err:
+ return ret;
+}
+
+static void moxa_board_deinit(struct moxa_board_conf *brd)
+{
+ unsigned int a, opened;
+
+ mutex_lock(&moxa_openlock);
+ spin_lock_bh(&moxa_lock);
+ brd->ready = 0;
+ spin_unlock_bh(&moxa_lock);
+
+ /* pci hot-un-plug support */
+ for (a = 0; a < brd->numPorts; a++)
+ if (brd->ports[a].asyncflags & ASYNC_INITIALIZED)
+ tty_hangup(brd->ports[a].tty);
+ while (1) {
+ opened = 0;
+ for (a = 0; a < brd->numPorts; a++)
+ if (brd->ports[a].asyncflags & ASYNC_INITIALIZED)
+ opened++;
+ mutex_unlock(&moxa_openlock);
+ if (!opened)
+ break;
+ msleep(50);
+ mutex_lock(&moxa_openlock);
+ }
+
+ iounmap(brd->basemem);
+ brd->basemem = NULL;
+ kfree(brd->ports);
+}
+
#ifdef CONFIG_PCI
static int __devinit moxa_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
@@ -299,10 +930,17 @@ static int __devinit moxa_pci_probe(struct pci_dev *pdev,
}
board = &moxa_boards[i];
- board->basemem = pci_iomap(pdev, 2, 0x4000);
+
+ retval = pci_request_region(pdev, 2, "moxa-base");
+ if (retval) {
+ dev_err(&pdev->dev, "can't request pci region 2\n");
+ goto err;
+ }
+
+ board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
if (board->basemem == NULL) {
dev_err(&pdev->dev, "can't remap io space 2\n");
- goto err;
+ goto err_reg;
}
board->boardType = board_type;
@@ -321,9 +959,21 @@ static int __devinit moxa_pci_probe(struct pci_dev *pdev,
}
board->busType = MOXA_BUS_TYPE_PCI;
+ retval = moxa_init_board(board, &pdev->dev);
+ if (retval)
+ goto err_base;
+
pci_set_drvdata(pdev, board);
- return (0);
+ dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
+ moxa_brdname[board_type - 1], board->numPorts);
+
+ return 0;
+err_base:
+ iounmap(board->basemem);
+ board->basemem = NULL;
+err_reg:
+ pci_release_region(pdev, 2);
err:
return retval;
}
@@ -332,8 +982,9 @@ static void __devexit moxa_pci_remove(struct pci_dev *pdev)
{
struct moxa_board_conf *brd = pci_get_drvdata(pdev);
- pci_iounmap(pdev, brd->basemem);
- brd->basemem = NULL;
+ moxa_board_deinit(brd);
+
+ pci_release_region(pdev, 2);
}
static struct pci_driver moxa_pci_driver = {
@@ -346,8 +997,8 @@ static struct pci_driver moxa_pci_driver = {
static int __init moxa_init(void)
{
- int i, numBoards, retval = 0;
- struct moxa_port *ch;
+ unsigned int isabrds = 0;
+ int retval = 0;
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
@@ -368,154 +1019,176 @@ static int __init moxa_init(void)
moxaDriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(moxaDriver, &moxa_ops);
- for (i = 0, ch = moxa_ports; i < MAX_PORTS; i++, ch++) {
- ch->type = PORT_16550A;
- ch->port = i;
- ch->close_delay = 5 * HZ / 10;
- ch->closing_wait = 30 * HZ;
- ch->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
- init_waitqueue_head(&ch->open_wait);
- init_completion(&ch->close_wait);
-
- setup_timer(&ch->emptyTimer, moxa_check_xmit_empty,
- (unsigned long)ch);
- }
-
- pr_debug("Moxa tty devices major number = %d\n", ttymajor);
-
if (tty_register_driver(moxaDriver)) {
- printk(KERN_ERR "Couldn't install MOXA Smartio family driver !\n");
+ printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
put_tty_driver(moxaDriver);
return -1;
}
- mod_timer(&moxaTimer, jiffies + HZ / 50);
-
- /* Find the boards defined in source code */
- numBoards = 0;
- for (i = 0; i < MAX_BOARDS; i++) {
- if ((moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA) ||
- (moxa_isa_boards[i].boardType == MOXA_BOARD_C320_ISA)) {
- moxa_boards[numBoards].boardType = moxa_isa_boards[i].boardType;
- if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA)
- moxa_boards[numBoards].numPorts = 8;
- else
- moxa_boards[numBoards].numPorts = moxa_isa_boards[i].numPorts;
- moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA;
- moxa_boards[numBoards].baseAddr = moxa_isa_boards[i].baseAddr;
- pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
- numBoards + 1,
- moxa_brdname[moxa_boards[numBoards].boardType-1],
- moxa_boards[numBoards].baseAddr);
- numBoards++;
- }
- }
- /* Find the boards defined form module args. */
+ /* Find the boards defined from module args. */
#ifdef MODULE
+ {
+ struct moxa_board_conf *brd = moxa_boards;
+ unsigned int i;
for (i = 0; i < MAX_BOARDS; i++) {
- if ((type[i] == MOXA_BOARD_C218_ISA) ||
- (type[i] == MOXA_BOARD_C320_ISA)) {
+ if (!baseaddr[i])
+ break;
+ if (type[i] == MOXA_BOARD_C218_ISA ||
+ type[i] == MOXA_BOARD_C320_ISA) {
pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
- numBoards + 1, moxa_brdname[type[i] - 1],
- (unsigned long)baseaddr[i]);
- if (numBoards >= MAX_BOARDS) {
- printk(KERN_WARNING "More than %d MOXA "
- "Intellio family boards found. Board "
- "is ignored.\n", MAX_BOARDS);
+ isabrds + 1, moxa_brdname[type[i] - 1],
+ baseaddr[i]);
+ brd->boardType = type[i];
+ brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
+ numports[i];
+ brd->busType = MOXA_BUS_TYPE_ISA;
+ brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
+ if (!brd->basemem) {
+ printk(KERN_ERR "MOXA: can't remap %lx\n",
+ baseaddr[i]);
continue;
}
- moxa_boards[numBoards].boardType = type[i];
- if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA)
- moxa_boards[numBoards].numPorts = 8;
- else
- moxa_boards[numBoards].numPorts = numports[i];
- moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA;
- moxa_boards[numBoards].baseAddr = baseaddr[i];
- numBoards++;
+ if (moxa_init_board(brd, NULL)) {
+ iounmap(brd->basemem);
+ brd->basemem = NULL;
+ continue;
+ }
+
+ printk(KERN_INFO "MOXA isa board found at 0x%.8lu and "
+ "ready (%u ports, firmware loaded)\n",
+ baseaddr[i], brd->numPorts);
+
+ brd++;
+ isabrds++;
}
}
+ }
#endif
#ifdef CONFIG_PCI
retval = pci_register_driver(&moxa_pci_driver);
if (retval) {
- printk(KERN_ERR "Can't register moxa pci driver!\n");
- if (numBoards)
+ printk(KERN_ERR "Can't register MOXA pci driver!\n");
+ if (isabrds)
retval = 0;
}
#endif
- for (i = 0; i < numBoards; i++) {
- moxa_boards[i].basemem = ioremap(moxa_boards[i].baseAddr,
- 0x4000);
- }
-
return retval;
}
static void __exit moxa_exit(void)
{
- int i;
+ unsigned int i;
- del_timer_sync(&moxaTimer);
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&moxa_pci_driver);
+#endif
+
+ for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
+ if (moxa_boards[i].ready)
+ moxa_board_deinit(&moxa_boards[i]);
- for (i = 0; i < MAX_PORTS; i++)
- del_timer_sync(&moxa_ports[i].emptyTimer);
+ del_timer_sync(&moxaTimer);
if (tty_unregister_driver(moxaDriver))
printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
"serial driver\n");
put_tty_driver(moxaDriver);
-
-#ifdef CONFIG_PCI
- pci_unregister_driver(&moxa_pci_driver);
-#endif
-
- for (i = 0; i < MAX_BOARDS; i++)
- if (moxa_boards[i].basemem)
- iounmap(moxa_boards[i].basemem);
}
module_init(moxa_init);
module_exit(moxa_exit);
+static void moxa_close_port(struct moxa_port *ch)
+{
+ moxa_shut_down(ch);
+ MoxaPortFlushData(ch, 2);
+ ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
+ ch->tty->driver_data = NULL;
+ ch->tty = NULL;
+}
+
+static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
+ struct moxa_port *ch)
+{
+ DEFINE_WAIT(wait);
+ int retval = 0;
+ u8 dcd;
+
+ while (1) {
+ prepare_to_wait(&ch->open_wait, &wait, TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp)) {
+#ifdef SERIAL_DO_RESTART
+ retval = -ERESTARTSYS;
+#else
+ retval = -EAGAIN;
+#endif
+ break;
+ }
+ spin_lock_bh(&moxa_lock);
+ dcd = ch->DCDState;
+ spin_unlock_bh(&moxa_lock);
+ if (dcd)
+ break;
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+ finish_wait(&ch->open_wait, &wait);
+
+ return retval;
+}
+
static int moxa_open(struct tty_struct *tty, struct file *filp)
{
+ struct moxa_board_conf *brd;
struct moxa_port *ch;
int port;
int retval;
port = tty->index;
if (port == MAX_PORTS) {
- return (0);
+ return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
}
- if (!MoxaPortIsValid(port)) {
- tty->driver_data = NULL;
- return (-ENODEV);
+ if (mutex_lock_interruptible(&moxa_openlock))
+ return -ERESTARTSYS;
+ brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
+ if (!brd->ready) {
+ mutex_unlock(&moxa_openlock);
+ return -ENODEV;
}
- ch = &moxa_ports[port];
+ ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
ch->count++;
tty->driver_data = ch;
ch->tty = tty;
if (!(ch->asyncflags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
moxa_set_tty_param(tty, tty->termios);
- MoxaPortLineCtrl(ch->port, 1, 1);
- MoxaPortEnable(ch->port);
+ MoxaPortLineCtrl(ch, 1, 1);
+ MoxaPortEnable(ch);
+ MoxaSetFifo(ch, ch->type == PORT_16550A);
ch->asyncflags |= ASYNC_INITIALIZED;
}
- retval = moxa_block_till_ready(tty, filp, ch);
+ mutex_unlock(&moxa_openlock);
- moxa_unthrottle(tty);
-
- if (ch->type == PORT_16550A) {
- MoxaSetFifo(ch->port, 1);
- } else {
- MoxaSetFifo(ch->port, 0);
- }
+ retval = 0;
+ if (!(filp->f_flags & O_NONBLOCK) && !C_CLOCAL(tty))
+ retval = moxa_block_till_ready(tty, filp, ch);
+ mutex_lock(&moxa_openlock);
+ if (retval) {
+ if (ch->count) /* 0 means already hung up... */
+ if (--ch->count == 0)
+ moxa_close_port(ch);
+ } else
+ ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
+ mutex_unlock(&moxa_openlock);
- return (retval);
+ return retval;
}
static void moxa_close(struct tty_struct *tty, struct file *filp)
@@ -524,23 +1197,14 @@ static void moxa_close(struct tty_struct *tty, struct file *filp)
int port;
port = tty->index;
- if (port == MAX_PORTS) {
- return;
- }
- if (!MoxaPortIsValid(port)) {
- pr_debug("Invalid portno in moxa_close\n");
- tty->driver_data = NULL;
- return;
- }
- if (tty->driver_data == NULL) {
+ if (port == MAX_PORTS || tty_hung_up_p(filp))
return;
- }
- if (tty_hung_up_p(filp)) {
- return;
- }
- ch = (struct moxa_port *) tty->driver_data;
- if ((tty->count == 1) && (ch->count != 1)) {
+ mutex_lock(&moxa_openlock);
+ ch = tty->driver_data;
+ if (ch == NULL)
+ goto unlock;
+ if (tty->count == 1 && ch->count != 1) {
printk(KERN_WARNING "moxa_close: bad serial port count; "
"tty->count is 1, ch->count is %d\n", ch->count);
ch->count = 1;
@@ -550,59 +1214,35 @@ static void moxa_close(struct tty_struct *tty, struct file *filp)
"device=%s\n", tty->name);
ch->count = 0;
}
- if (ch->count) {
- return;
- }
- ch->asyncflags |= ASYNC_CLOSING;
+ if (ch->count)
+ goto unlock;
ch->cflag = tty->termios->c_cflag;
if (ch->asyncflags & ASYNC_INITIALIZED) {
moxa_setup_empty_event(tty);
tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
- del_timer_sync(&moxa_ports[ch->port].emptyTimer);
- }
- moxa_shut_down(ch);
- MoxaPortFlushData(port, 2);
-
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- ch->event = 0;
- ch->tty = NULL;
- if (ch->blocked_open) {
- if (ch->close_delay) {
- msleep_interruptible(jiffies_to_msecs(ch->close_delay));
- }
- wake_up_interruptible(&ch->open_wait);
}
- ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- complete_all(&ch->close_wait);
+
+ moxa_close_port(ch);
+unlock:
+ mutex_unlock(&moxa_openlock);
}
static int moxa_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
- struct moxa_port *ch;
- int len, port;
- unsigned long flags;
+ struct moxa_port *ch = tty->driver_data;
+ int len;
- ch = (struct moxa_port *) tty->driver_data;
if (ch == NULL)
- return (0);
- port = ch->port;
+ return 0;
- spin_lock_irqsave(&moxa_lock, flags);
- len = MoxaPortWriteData(port, (unsigned char *) buf, count);
- spin_unlock_irqrestore(&moxa_lock, flags);
+ spin_lock_bh(&moxa_lock);
+ len = MoxaPortWriteData(ch, buf, count);
+ spin_unlock_bh(&moxa_lock);
- /*********************************************
- if ( !(ch->statusflags & LOWWAIT) &&
- ((len != count) || (MoxaPortTxFree(port) <= 100)) )
- ************************************************/
ch->statusflags |= LOWWAIT;
- return (len);
+ return len;
}
static int moxa_write_room(struct tty_struct *tty)
@@ -610,27 +1250,27 @@ static int moxa_write_room(struct tty_struct *tty)
struct moxa_port *ch;
if (tty->stopped)
- return (0);
- ch = (struct moxa_port *) tty->driver_data;
+ return 0;
+ ch = tty->driver_data;
if (ch == NULL)
- return (0);
- return (MoxaPortTxFree(ch->port));
+ return 0;
+ return MoxaPortTxFree(ch);
}
static void moxa_flush_buffer(struct tty_struct *tty)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch = tty->driver_data;
if (ch == NULL)
return;
- MoxaPortFlushData(ch->port, 1);
+ MoxaPortFlushData(ch, 1);
tty_wakeup(tty);
}
static int moxa_chars_in_buffer(struct tty_struct *tty)
{
+ struct moxa_port *ch = tty->driver_data;
int chars;
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
/*
* Sigh...I have to check if driver_data is NULL here, because
@@ -639,8 +1279,9 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
* routine. And since the open() failed, we return 0 here. TDJ
*/
if (ch == NULL)
- return (0);
- chars = MoxaPortTxQueue(ch->port);
+ return 0;
+ lock_kernel();
+ chars = MoxaPortTxQueue(ch);
if (chars) {
/*
* Make it possible to wakeup anything waiting for output
@@ -649,73 +1290,54 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
if (!(ch->statusflags & EMPTYWAIT))
moxa_setup_empty_event(tty);
}
- return (chars);
-}
-
-static void moxa_flush_chars(struct tty_struct *tty)
-{
- /*
- * Don't think I need this, because this is called to empty the TX
- * buffer for the 16450, 16550, etc.
- */
-}
-
-static void moxa_put_char(struct tty_struct *tty, unsigned char c)
-{
- struct moxa_port *ch;
- int port;
- unsigned long flags;
-
- ch = (struct moxa_port *) tty->driver_data;
- if (ch == NULL)
- return;
- port = ch->port;
- spin_lock_irqsave(&moxa_lock, flags);
- MoxaPortWriteData(port, &c, 1);
- spin_unlock_irqrestore(&moxa_lock, flags);
- /************************************************
- if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) )
- *************************************************/
- ch->statusflags |= LOWWAIT;
+ unlock_kernel();
+ return chars;
}
static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
- int port;
+ struct moxa_port *ch;
int flag = 0, dtr, rts;
- port = tty->index;
- if ((port != MAX_PORTS) && (!ch))
- return (-EINVAL);
+ mutex_lock(&moxa_openlock);
+ ch = tty->driver_data;
+ if (!ch) {
+ mutex_unlock(&moxa_openlock);
+ return -EINVAL;
+ }
- MoxaPortGetLineOut(ch->port, &dtr, &rts);
+ MoxaPortGetLineOut(ch, &dtr, &rts);
if (dtr)
flag |= TIOCM_DTR;
if (rts)
flag |= TIOCM_RTS;
- dtr = MoxaPortLineStatus(ch->port);
+ dtr = MoxaPortLineStatus(ch);
if (dtr & 1)
flag |= TIOCM_CTS;
if (dtr & 2)
flag |= TIOCM_DSR;
if (dtr & 4)
flag |= TIOCM_CD;
+ mutex_unlock(&moxa_openlock);
return flag;
}
static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch;
int port;
int dtr, rts;
port = tty->index;
- if ((port != MAX_PORTS) && (!ch))
- return (-EINVAL);
+ mutex_lock(&moxa_openlock);
+ ch = tty->driver_data;
+ if (!ch) {
+ mutex_unlock(&moxa_openlock);
+ return -EINVAL;
+ }
- MoxaPortGetLineOut(ch->port, &dtr, &rts);
+ MoxaPortGetLineOut(ch, &dtr, &rts);
if (set & TIOCM_RTS)
rts = 1;
if (set & TIOCM_DTR)
@@ -724,105 +1346,51 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
rts = 0;
if (clear & TIOCM_DTR)
dtr = 0;
- MoxaPortLineCtrl(ch->port, dtr, rts);
+ MoxaPortLineCtrl(ch, dtr, rts);
+ mutex_unlock(&moxa_openlock);
return 0;
}
-static int moxa_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
- register int port;
- void __user *argp = (void __user *)arg;
- int retval;
-
- port = tty->index;
- if ((port != MAX_PORTS) && (!ch))
- return (-EINVAL);
-
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return (retval);
- moxa_setup_empty_event(tty);
- tty_wait_until_sent(tty, 0);
- if (!arg)
- MoxaPortSendBreak(ch->port, 0);
- return (0);
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return (retval);
- moxa_setup_empty_event(tty);
- tty_wait_until_sent(tty, 0);
- MoxaPortSendBreak(ch->port, arg);
- return (0);
- case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp);
- case TIOCSSOFTCAR:
- if(get_user(retval, (unsigned long __user *) argp))
- return -EFAULT;
- arg = retval;
- tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- if (C_CLOCAL(tty))
- ch->asyncflags &= ~ASYNC_CHECK_CD;
- else
- ch->asyncflags |= ASYNC_CHECK_CD;
- return (0);
- case TIOCGSERIAL:
- return moxa_get_serial_info(ch, argp);
-
- case TIOCSSERIAL:
- return moxa_set_serial_info(ch, argp);
- default:
- retval = MoxaDriverIoctl(cmd, arg, port);
- }
- return (retval);
-}
-
static void moxa_throttle(struct tty_struct *tty)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch = tty->driver_data;
ch->statusflags |= THROTTLE;
}
static void moxa_unthrottle(struct tty_struct *tty)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch = tty->driver_data;
ch->statusflags &= ~THROTTLE;
}
static void moxa_set_termios(struct tty_struct *tty,
- struct ktermios *old_termios)
+ struct ktermios *old_termios)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch = tty->driver_data;
if (ch == NULL)
return;
moxa_set_tty_param(tty, old_termios);
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
+ if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
wake_up_interruptible(&ch->open_wait);
}
static void moxa_stop(struct tty_struct *tty)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch = tty->driver_data;
if (ch == NULL)
return;
- MoxaPortTxDisable(ch->port);
+ MoxaPortTxDisable(ch);
ch->statusflags |= TXSTOPPED;
}
static void moxa_start(struct tty_struct *tty)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch = tty->driver_data;
if (ch == NULL)
return;
@@ -830,91 +1398,143 @@ static void moxa_start(struct tty_struct *tty)
if (!(ch->statusflags & TXSTOPPED))
return;
- MoxaPortTxEnable(ch->port);
+ MoxaPortTxEnable(ch);
ch->statusflags &= ~TXSTOPPED;
}
static void moxa_hangup(struct tty_struct *tty)
{
- struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+ struct moxa_port *ch;
- moxa_flush_buffer(tty);
- moxa_shut_down(ch);
- ch->event = 0;
+ mutex_lock(&moxa_openlock);
+ ch = tty->driver_data;
+ if (ch == NULL) {
+ mutex_unlock(&moxa_openlock);
+ return;
+ }
ch->count = 0;
- ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
- ch->tty = NULL;
+ moxa_close_port(ch);
+ mutex_unlock(&moxa_openlock);
+
wake_up_interruptible(&ch->open_wait);
}
-static void moxa_poll(unsigned long ignored)
+static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
{
- register int card;
- struct moxa_port *ch;
- struct tty_struct *tp;
- int i, ports;
+ dcd = !!dcd;
- del_timer(&moxaTimer);
+ if (dcd != p->DCDState && p->tty && C_CLOCAL(p->tty)) {
+ if (!dcd)
+ tty_hangup(p->tty);
+ }
+ p->DCDState = dcd;
+}
- if (MoxaDriverPoll() < 0) {
- mod_timer(&moxaTimer, jiffies + HZ / 50);
- return;
+static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
+ u16 __iomem *ip)
+{
+ struct tty_struct *tty = p->tty;
+ void __iomem *ofsAddr;
+ unsigned int inited = p->asyncflags & ASYNC_INITIALIZED;
+ u16 intr;
+
+ if (tty) {
+ if ((p->statusflags & EMPTYWAIT) &&
+ MoxaPortTxQueue(p) == 0) {
+ p->statusflags &= ~EMPTYWAIT;
+ tty_wakeup(tty);
+ }
+ if ((p->statusflags & LOWWAIT) && !tty->stopped &&
+ MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
+ p->statusflags &= ~LOWWAIT;
+ tty_wakeup(tty);
+ }
+
+ if (inited && !(p->statusflags & THROTTLE) &&
+ MoxaPortRxQueue(p) > 0) { /* RX */
+ MoxaPortReadData(p);
+ tty_schedule_flip(tty);
+ }
+ } else {
+ p->statusflags &= ~EMPTYWAIT;
+ MoxaPortFlushData(p, 0); /* flush RX */
}
+
+ if (!handle) /* nothing else to do */
+ return 0;
+
+ intr = readw(ip); /* port irq status */
+ if (intr == 0)
+ return 0;
+
+ writew(0, ip); /* ACK port */
+ ofsAddr = p->tableAddr;
+ if (intr & IntrTx) /* disable tx intr */
+ writew(readw(ofsAddr + HostStat) & ~WakeupTx,
+ ofsAddr + HostStat);
+
+ if (!inited)
+ return 0;
+
+ if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ tty_schedule_flip(tty);
+ }
+
+ if (intr & IntrLine)
+ moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
+
+ return 0;
+}
+
+static void moxa_poll(unsigned long ignored)
+{
+ struct moxa_board_conf *brd;
+ u16 __iomem *ip;
+ unsigned int card, port, served = 0;
+
+ spin_lock(&moxa_lock);
for (card = 0; card < MAX_BOARDS; card++) {
- if ((ports = MoxaPortsOfCard(card)) <= 0)
+ brd = &moxa_boards[card];
+ if (!brd->ready)
continue;
- ch = &moxa_ports[card * MAX_PORTS_PER_BOARD];
- for (i = 0; i < ports; i++, ch++) {
- if ((ch->asyncflags & ASYNC_INITIALIZED) == 0)
- continue;
- if (!(ch->statusflags & THROTTLE) &&
- (MoxaPortRxQueue(ch->port) > 0))
- moxa_receive_data(ch);
- if ((tp = ch->tty) == 0)
- continue;
- if (ch->statusflags & LOWWAIT) {
- if (MoxaPortTxQueue(ch->port) <= WAKEUP_CHARS) {
- if (!tp->stopped) {
- ch->statusflags &= ~LOWWAIT;
- tty_wakeup(tp);
- }
- }
- }
- if (!I_IGNBRK(tp) && (MoxaPortResetBrkCnt(ch->port) > 0)) {
- tty_insert_flip_char(tp, 0, TTY_BREAK);
- tty_schedule_flip(tp);
- }
- if (MoxaPortDCDChange(ch->port)) {
- if (ch->asyncflags & ASYNC_CHECK_CD) {
- if (MoxaPortDCDON(ch->port))
- wake_up_interruptible(&ch->open_wait);
- else {
- tty_hangup(tp);
- wake_up_interruptible(&ch->open_wait);
- ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
- }
+
+ served++;
+
+ ip = NULL;
+ if (readb(brd->intPend) == 0xff)
+ ip = brd->intTable + readb(brd->intNdx);
+
+ for (port = 0; port < brd->numPorts; port++)
+ moxa_poll_port(&brd->ports[port], !!ip, ip + port);
+
+ if (ip)
+ writeb(0, brd->intPend); /* ACK */
+
+ if (moxaLowWaterChk) {
+ struct moxa_port *p = brd->ports;
+ for (port = 0; port < brd->numPorts; port++, p++)
+ if (p->lowChkFlag) {
+ p->lowChkFlag = 0;
+ moxa_low_water_check(p->tableAddr);
}
- }
}
}
+ moxaLowWaterChk = 0;
- mod_timer(&moxaTimer, jiffies + HZ / 50);
+ if (served)
+ mod_timer(&moxaTimer, jiffies + HZ / 50);
+ spin_unlock(&moxa_lock);
}
/******************************************************************************/
static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
{
- register struct ktermios *ts;
- struct moxa_port *ch;
+ register struct ktermios *ts = tty->termios;
+ struct moxa_port *ch = tty->driver_data;
int rts, cts, txflow, rxflow, xany, baud;
- ch = (struct moxa_port *) tty->driver_data;
- ts = tty->termios;
- if (ts->c_cflag & CLOCAL)
- ch->asyncflags &= ~ASYNC_CHECK_CD;
- else
- ch->asyncflags |= ASYNC_CHECK_CD;
rts = cts = txflow = rxflow = xany = 0;
if (ts->c_cflag & CRTSCTS)
rts = cts = 1;
@@ -927,776 +1547,60 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_term
/* Clear the features we don't support */
ts->c_cflag &= ~CMSPAR;
- MoxaPortFlowCtrl(ch->port, rts, cts, txflow, rxflow, xany);
- baud = MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty));
+ MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
+ baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
if (baud == -1)
baud = tty_termios_baud_rate(old_termios);
/* Not put the baud rate into the termios data */
tty_encode_baud_rate(tty, baud, baud);
}
-static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
- struct moxa_port *ch)
-{
- DECLARE_WAITQUEUE(wait,current);
- unsigned long flags;
- int retval;
- int do_clocal = C_CLOCAL(tty);
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || (ch->asyncflags & ASYNC_CLOSING)) {
- if (ch->asyncflags & ASYNC_CLOSING)
- wait_for_completion_interruptible(&ch->close_wait);
-#ifdef SERIAL_DO_RESTART
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
- return (-EAGAIN);
- else
- return (-ERESTARTSYS);
-#else
- return (-EAGAIN);
-#endif
- }
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if (filp->f_flags & O_NONBLOCK) {
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
- return (0);
- }
- /*
- * Block waiting for the carrier detect and the line to become free
- */
- retval = 0;
- add_wait_queue(&ch->open_wait, &wait);
- pr_debug("block_til_ready before block: ttys%d, count = %d\n",
- ch->port, ch->count);
- spin_lock_irqsave(&moxa_lock, flags);
- if (!tty_hung_up_p(filp))
- ch->count--;
- ch->blocked_open++;
- spin_unlock_irqrestore(&moxa_lock, flags);
-
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(ch->asyncflags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(ch->asyncflags & ASYNC_CLOSING) && (do_clocal ||
- MoxaPortDCDON(ch->port)))
- break;
-
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&ch->open_wait, &wait);
-
- spin_lock_irqsave(&moxa_lock, flags);
- if (!tty_hung_up_p(filp))
- ch->count++;
- ch->blocked_open--;
- spin_unlock_irqrestore(&moxa_lock, flags);
- pr_debug("block_til_ready after blocking: ttys%d, count = %d\n",
- ch->port, ch->count);
- if (retval)
- return (retval);
- /* FIXME: review to see if we need to use set_bit on these */
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
static void moxa_setup_empty_event(struct tty_struct *tty)
{
struct moxa_port *ch = tty->driver_data;
- unsigned long flags;
- spin_lock_irqsave(&moxa_lock, flags);
+ spin_lock_bh(&moxa_lock);
ch->statusflags |= EMPTYWAIT;
- mod_timer(&moxa_ports[ch->port].emptyTimer, jiffies + HZ);
- spin_unlock_irqrestore(&moxa_lock, flags);
-}
-
-static void moxa_check_xmit_empty(unsigned long data)
-{
- struct moxa_port *ch;
-
- ch = (struct moxa_port *) data;
- if (ch->tty && (ch->statusflags & EMPTYWAIT)) {
- if (MoxaPortTxQueue(ch->port) == 0) {
- ch->statusflags &= ~EMPTYWAIT;
- tty_wakeup(ch->tty);
- return;
- }
- mod_timer(&moxa_ports[ch->port].emptyTimer,
- round_jiffies(jiffies + HZ));
- } else
- ch->statusflags &= ~EMPTYWAIT;
+ spin_unlock_bh(&moxa_lock);
}
static void moxa_shut_down(struct moxa_port *ch)
{
- struct tty_struct *tp;
+ struct tty_struct *tp = ch->tty;
if (!(ch->asyncflags & ASYNC_INITIALIZED))
return;
- tp = ch->tty;
-
- MoxaPortDisable(ch->port);
+ MoxaPortDisable(ch);
/*
* If we're a modem control device and HUPCL is on, drop RTS & DTR.
*/
- if (tp->termios->c_cflag & HUPCL)
- MoxaPortLineCtrl(ch->port, 0, 0);
+ if (C_HUPCL(tp))
+ MoxaPortLineCtrl(ch, 0, 0);
+ spin_lock_bh(&moxa_lock);
ch->asyncflags &= ~ASYNC_INITIALIZED;
+ spin_unlock_bh(&moxa_lock);
}
-static void moxa_receive_data(struct moxa_port *ch)
-{
- struct tty_struct *tp;
- struct ktermios *ts;
- unsigned long flags;
-
- ts = NULL;
- tp = ch->tty;
- if (tp)
- ts = tp->termios;
- /**************************************************
- if ( !tp || !ts || !(ts->c_cflag & CREAD) ) {
- *****************************************************/
- if (!tp || !ts) {
- MoxaPortFlushData(ch->port, 0);
- return;
- }
- spin_lock_irqsave(&moxa_lock, flags);
- MoxaPortReadData(ch->port, tp);
- spin_unlock_irqrestore(&moxa_lock, flags);
- tty_schedule_flip(tp);
-}
-
-#define Magic_code 0x404
-
-/*
- * System Configuration
- */
-/*
- * for C218 BIOS initialization
- */
-#define C218_ConfBase 0x800
-#define C218_status (C218_ConfBase + 0) /* BIOS running status */
-#define C218_diag (C218_ConfBase + 2) /* diagnostic status */
-#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */
-#define C218DLoad_len (C218_ConfBase + 6) /* WORD */
-#define C218check_sum (C218_ConfBase + 8) /* BYTE */
-#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */
-#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */
-#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */
-#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */
-#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */
-
-#define C218_LoadBuf 0x0F00
-#define C218_KeyCode 0x218
-#define CP204J_KeyCode 0x204
-
-/*
- * for C320 BIOS initialization
- */
-#define C320_ConfBase 0x800
-#define C320_LoadBuf 0x0f00
-#define STS_init 0x05 /* for C320_status */
-
-#define C320_status C320_ConfBase + 0 /* BIOS running status */
-#define C320_diag C320_ConfBase + 2 /* diagnostic status */
-#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */
-#define C320DLoad_len C320_ConfBase + 6 /* WORD */
-#define C320check_sum C320_ConfBase + 8 /* WORD */
-#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */
-#define C320bapi_len C320_ConfBase + 0x0c /* WORD */
-#define C320UART_no C320_ConfBase + 0x0e /* WORD */
-
-#define C320_KeyCode 0x320
-
-#define FixPage_addr 0x0000 /* starting addr of static page */
-#define DynPage_addr 0x2000 /* starting addr of dynamic page */
-#define C218_start 0x3000 /* starting addr of C218 BIOS prg */
-#define Control_reg 0x1ff0 /* select page and reset control */
-#define HW_reset 0x80
-
-/*
- * Function Codes
- */
-#define FC_CardReset 0x80
-#define FC_ChannelReset 1 /* C320 firmware not supported */
-#define FC_EnableCH 2
-#define FC_DisableCH 3
-#define FC_SetParam 4
-#define FC_SetMode 5
-#define FC_SetRate 6
-#define FC_LineControl 7
-#define FC_LineStatus 8
-#define FC_XmitControl 9
-#define FC_FlushQueue 10
-#define FC_SendBreak 11
-#define FC_StopBreak 12
-#define FC_LoopbackON 13
-#define FC_LoopbackOFF 14
-#define FC_ClrIrqTable 15
-#define FC_SendXon 16
-#define FC_SetTermIrq 17 /* C320 firmware not supported */
-#define FC_SetCntIrq 18 /* C320 firmware not supported */
-#define FC_SetBreakIrq 19
-#define FC_SetLineIrq 20
-#define FC_SetFlowCtl 21
-#define FC_GenIrq 22
-#define FC_InCD180 23
-#define FC_OutCD180 24
-#define FC_InUARTreg 23
-#define FC_OutUARTreg 24
-#define FC_SetXonXoff 25
-#define FC_OutCD180CCR 26
-#define FC_ExtIQueue 27
-#define FC_ExtOQueue 28
-#define FC_ClrLineIrq 29
-#define FC_HWFlowCtl 30
-#define FC_GetClockRate 35
-#define FC_SetBaud 36
-#define FC_SetDataMode 41
-#define FC_GetCCSR 43
-#define FC_GetDataError 45
-#define FC_RxControl 50
-#define FC_ImmSend 51
-#define FC_SetXonState 52
-#define FC_SetXoffState 53
-#define FC_SetRxFIFOTrig 54
-#define FC_SetTxFIFOCnt 55
-#define FC_UnixRate 56
-#define FC_UnixResetTimer 57
-
-#define RxFIFOTrig1 0
-#define RxFIFOTrig4 1
-#define RxFIFOTrig8 2
-#define RxFIFOTrig14 3
-
-/*
- * Dual-Ported RAM
- */
-#define DRAM_global 0
-#define INT_data (DRAM_global + 0)
-#define Config_base (DRAM_global + 0x108)
-
-#define IRQindex (INT_data + 0)
-#define IRQpending (INT_data + 4)
-#define IRQtable (INT_data + 8)
-
-/*
- * Interrupt Status
- */
-#define IntrRx 0x01 /* receiver data O.K. */
-#define IntrTx 0x02 /* transmit buffer empty */
-#define IntrFunc 0x04 /* function complete */
-#define IntrBreak 0x08 /* received break */
-#define IntrLine 0x10 /* line status change
- for transmitter */
-#define IntrIntr 0x20 /* received INTR code */
-#define IntrQuit 0x40 /* received QUIT code */
-#define IntrEOF 0x80 /* received EOF code */
-
-#define IntrRxTrigger 0x100 /* rx data count reach tigger value */
-#define IntrTxTrigger 0x200 /* tx data count below trigger value */
-
-#define Magic_no (Config_base + 0)
-#define Card_model_no (Config_base + 2)
-#define Total_ports (Config_base + 4)
-#define Module_cnt (Config_base + 8)
-#define Module_no (Config_base + 10)
-#define Timer_10ms (Config_base + 14)
-#define Disable_IRQ (Config_base + 20)
-#define TMS320_PORT1 (Config_base + 22)
-#define TMS320_PORT2 (Config_base + 24)
-#define TMS320_CLOCK (Config_base + 26)
-
-/*
- * DATA BUFFER in DRAM
- */
-#define Extern_table 0x400 /* Base address of the external table
- (24 words * 64) total 3K bytes
- (24 words * 128) total 6K bytes */
-#define Extern_size 0x60 /* 96 bytes */
-#define RXrptr 0x00 /* read pointer for RX buffer */
-#define RXwptr 0x02 /* write pointer for RX buffer */
-#define TXrptr 0x04 /* read pointer for TX buffer */
-#define TXwptr 0x06 /* write pointer for TX buffer */
-#define HostStat 0x08 /* IRQ flag and general flag */
-#define FlagStat 0x0A
-#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */
- /* x x x x | | | | */
- /* | | | + CTS flow */
- /* | | +--- RTS flow */
- /* | +------ TX Xon/Xoff */
- /* +--------- RX Xon/Xoff */
-#define Break_cnt 0x0E /* received break count */
-#define CD180TXirq 0x10 /* if non-0: enable TX irq */
-#define RX_mask 0x12
-#define TX_mask 0x14
-#define Ofs_rxb 0x16
-#define Ofs_txb 0x18
-#define Page_rxb 0x1A
-#define Page_txb 0x1C
-#define EndPage_rxb 0x1E
-#define EndPage_txb 0x20
-#define Data_error 0x22
-#define RxTrigger 0x28
-#define TxTrigger 0x2a
-
-#define rRXwptr 0x34
-#define Low_water 0x36
-
-#define FuncCode 0x40
-#define FuncArg 0x42
-#define FuncArg1 0x44
-
-#define C218rx_size 0x2000 /* 8K bytes */
-#define C218tx_size 0x8000 /* 32K bytes */
-
-#define C218rx_mask (C218rx_size - 1)
-#define C218tx_mask (C218tx_size - 1)
-
-#define C320p8rx_size 0x2000
-#define C320p8tx_size 0x8000
-#define C320p8rx_mask (C320p8rx_size - 1)
-#define C320p8tx_mask (C320p8tx_size - 1)
-
-#define C320p16rx_size 0x2000
-#define C320p16tx_size 0x4000
-#define C320p16rx_mask (C320p16rx_size - 1)
-#define C320p16tx_mask (C320p16tx_size - 1)
-
-#define C320p24rx_size 0x2000
-#define C320p24tx_size 0x2000
-#define C320p24rx_mask (C320p24rx_size - 1)
-#define C320p24tx_mask (C320p24tx_size - 1)
-
-#define C320p32rx_size 0x1000
-#define C320p32tx_size 0x1000
-#define C320p32rx_mask (C320p32rx_size - 1)
-#define C320p32tx_mask (C320p32tx_size - 1)
-
-#define Page_size 0x2000
-#define Page_mask (Page_size - 1)
-#define C218rx_spage 3
-#define C218tx_spage 4
-#define C218rx_pageno 1
-#define C218tx_pageno 4
-#define C218buf_pageno 5
-
-#define C320p8rx_spage 3
-#define C320p8tx_spage 4
-#define C320p8rx_pgno 1
-#define C320p8tx_pgno 4
-#define C320p8buf_pgno 5
-
-#define C320p16rx_spage 3
-#define C320p16tx_spage 4
-#define C320p16rx_pgno 1
-#define C320p16tx_pgno 2
-#define C320p16buf_pgno 3
-
-#define C320p24rx_spage 3
-#define C320p24tx_spage 4
-#define C320p24rx_pgno 1
-#define C320p24tx_pgno 1
-#define C320p24buf_pgno 2
-
-#define C320p32rx_spage 3
-#define C320p32tx_ofs C320p32rx_size
-#define C320p32tx_spage 3
-#define C320p32buf_pgno 1
-
-/*
- * Host Status
- */
-#define WakeupRx 0x01
-#define WakeupTx 0x02
-#define WakeupBreak 0x08
-#define WakeupLine 0x10
-#define WakeupIntr 0x20
-#define WakeupQuit 0x40
-#define WakeupEOF 0x80 /* used in VTIME control */
-#define WakeupRxTrigger 0x100
-#define WakeupTxTrigger 0x200
-/*
- * Flag status
- */
-#define Rx_over 0x01
-#define Xoff_state 0x02
-#define Tx_flowOff 0x04
-#define Tx_enable 0x08
-#define CTS_state 0x10
-#define DSR_state 0x20
-#define DCD_state 0x80
-/*
- * FlowControl
- */
-#define CTS_FlowCtl 1
-#define RTS_FlowCtl 2
-#define Tx_FlowCtl 4
-#define Rx_FlowCtl 8
-#define IXM_IXANY 0x10
-
-#define LowWater 128
-
-#define DTR_ON 1
-#define RTS_ON 2
-#define CTS_ON 1
-#define DSR_ON 2
-#define DCD_ON 8
-
-/* mode definition */
-#define MX_CS8 0x03
-#define MX_CS7 0x02
-#define MX_CS6 0x01
-#define MX_CS5 0x00
-
-#define MX_STOP1 0x00
-#define MX_STOP15 0x04
-#define MX_STOP2 0x08
-
-#define MX_PARNONE 0x00
-#define MX_PAREVEN 0x40
-#define MX_PARODD 0xC0
-
-/*
- * Query
- */
-
-struct mon_str {
- int tick;
- int rxcnt[MAX_PORTS];
- int txcnt[MAX_PORTS];
-};
-
-#define DCD_changed 0x01
-#define DCD_oldstate 0x80
-
-static unsigned char moxaBuff[10240];
-static int moxaLowWaterChk;
-static int moxaCard;
-static struct mon_str moxaLog;
-static int moxaFuncTout = HZ / 2;
-
-static void moxafunc(void __iomem *, int, ushort);
-static void moxa_wait_finish(void __iomem *);
-static void moxa_low_water_check(void __iomem *);
-static int moxaloadbios(int, unsigned char __user *, int);
-static int moxafindcard(int);
-static int moxaload320b(int, unsigned char __user *, int);
-static int moxaloadcode(int, unsigned char __user *, int);
-static int moxaloadc218(int, void __iomem *, int);
-static int moxaloadc320(int, void __iomem *, int, int *);
-
/*****************************************************************************
* Driver level functions: *
- * 1. MoxaDriverInit(void); *
- * 2. MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); *
- * 3. MoxaDriverPoll(void); *
*****************************************************************************/
-void MoxaDriverInit(void)
-{
- struct moxa_port *p;
- unsigned int i;
- moxaFuncTout = HZ / 2; /* 500 mini-seconds */
- moxaCard = 0;
- moxaLog.tick = 0;
- moxaLowWaterChk = 0;
- for (i = 0; i < MAX_PORTS; i++) {
- p = &moxa_ports[i];
- p->chkPort = 0;
- p->lowChkFlag = 0;
- p->lineCtrl = 0;
- moxaLog.rxcnt[i] = 0;
- moxaLog.txcnt[i] = 0;
- }
-}
-
-#define MOXA 0x400
-#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */
-#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */
-#define MOXA_INIT_DRIVER (MOXA + 6) /* moxaCard=0 */
-#define MOXA_LOAD_BIOS (MOXA + 9) /* download BIOS */
-#define MOXA_FIND_BOARD (MOXA + 10) /* Check if MOXA card exist? */
-#define MOXA_LOAD_C320B (MOXA + 11) /* download 320B firmware */
-#define MOXA_LOAD_CODE (MOXA + 12) /* download firmware */
-#define MOXA_GETDATACOUNT (MOXA + 23)
-#define MOXA_GET_IOQUEUE (MOXA + 27)
-#define MOXA_FLUSH_QUEUE (MOXA + 28)
-#define MOXA_GET_CONF (MOXA + 35) /* configuration */
-#define MOXA_GET_MAJOR (MOXA + 63)
-#define MOXA_GET_CUMAJOR (MOXA + 64)
-#define MOXA_GETMSTATUS (MOXA + 65)
-
-struct dl_str {
- char __user *buf;
- int len;
- int cardno;
-};
-
-static struct dl_str dltmp;
-
-void MoxaPortFlushData(int port, int mode)
+static void MoxaPortFlushData(struct moxa_port *port, int mode)
{
void __iomem *ofsAddr;
- if ((mode < 0) || (mode > 2))
+ if (mode < 0 || mode > 2)
return;
- ofsAddr = moxa_ports[port].tableAddr;
+ ofsAddr = port->tableAddr;
moxafunc(ofsAddr, FC_FlushQueue, mode);
if (mode != 1) {
- moxa_ports[port].lowChkFlag = 0;
+ port->lowChkFlag = 0;
moxa_low_water_check(ofsAddr);
}
}
-int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port)
-{
- int i;
- int status;
- int MoxaPortTxQueue(int), MoxaPortRxQueue(int);
- void __user *argp = (void __user *)arg;
-
- if (port == MAX_PORTS) {
- if ((cmd != MOXA_GET_CONF) && (cmd != MOXA_INIT_DRIVER) &&
- (cmd != MOXA_LOAD_BIOS) && (cmd != MOXA_FIND_BOARD) && (cmd != MOXA_LOAD_C320B) &&
- (cmd != MOXA_LOAD_CODE) && (cmd != MOXA_GETDATACOUNT) &&
- (cmd != MOXA_GET_IOQUEUE) && (cmd != MOXA_GET_MAJOR) &&
- (cmd != MOXA_GET_CUMAJOR) && (cmd != MOXA_GETMSTATUS))
- return (-EINVAL);
- }
- switch (cmd) {
- case MOXA_GET_CONF:
- if(copy_to_user(argp, &moxa_boards, MAX_BOARDS *
- sizeof(struct moxa_board_conf)))
- return -EFAULT;
- return (0);
- case MOXA_INIT_DRIVER:
- if ((int) arg == 0x404)
- MoxaDriverInit();
- return (0);
- case MOXA_GETDATACOUNT:
- moxaLog.tick = jiffies;
- if(copy_to_user(argp, &moxaLog, sizeof(struct mon_str)))
- return -EFAULT;
- return (0);
- case MOXA_FLUSH_QUEUE:
- MoxaPortFlushData(port, arg);
- return (0);
- case MOXA_GET_IOQUEUE: {
- struct moxaq_str __user *argm = argp;
- struct moxaq_str tmp;
-
- for (i = 0; i < MAX_PORTS; i++, argm++) {
- memset(&tmp, 0, sizeof(tmp));
- if (moxa_ports[i].chkPort) {
- tmp.inq = MoxaPortRxQueue(i);
- tmp.outq = MoxaPortTxQueue(i);
- }
- if (copy_to_user(argm, &tmp, sizeof(tmp)))
- return -EFAULT;
- }
- return (0);
- } case MOXA_GET_OQUEUE:
- i = MoxaPortTxQueue(port);
- return put_user(i, (unsigned long __user *)argp);
- case MOXA_GET_IQUEUE:
- i = MoxaPortRxQueue(port);
- return put_user(i, (unsigned long __user *)argp);
- case MOXA_GET_MAJOR:
- if(copy_to_user(argp, &ttymajor, sizeof(int)))
- return -EFAULT;
- return 0;
- case MOXA_GET_CUMAJOR:
- i = 0;
- if(copy_to_user(argp, &i, sizeof(int)))
- return -EFAULT;
- return 0;
- case MOXA_GETMSTATUS: {
- struct mxser_mstatus __user *argm = argp;
- struct mxser_mstatus tmp;
- struct moxa_port *p;
-
- for (i = 0; i < MAX_PORTS; i++, argm++) {
- p = &moxa_ports[i];
- memset(&tmp, 0, sizeof(tmp));
- if (!p->chkPort) {
- goto copy;
- } else {
- status = MoxaPortLineStatus(p->port);
- if (status & 1)
- tmp.cts = 1;
- if (status & 2)
- tmp.dsr = 1;
- if (status & 4)
- tmp.dcd = 1;
- }
-
- if (!p->tty || !p->tty->termios)
- tmp.cflag = p->cflag;
- else
- tmp.cflag = p->tty->termios->c_cflag;
-copy:
- if (copy_to_user(argm, &tmp, sizeof(tmp)))
- return -EFAULT;
- }
- return 0;
- } default:
- return (-ENOIOCTLCMD);
- case MOXA_LOAD_BIOS:
- case MOXA_FIND_BOARD:
- case MOXA_LOAD_C320B:
- case MOXA_LOAD_CODE:
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
- break;
- }
-
- if(copy_from_user(&dltmp, argp, sizeof(struct dl_str)))
- return -EFAULT;
- if(dltmp.cardno < 0 || dltmp.cardno >= MAX_BOARDS || dltmp.len < 0)
- return -EINVAL;
-
- switch(cmd)
- {
- case MOXA_LOAD_BIOS:
- i = moxaloadbios(dltmp.cardno, dltmp.buf, dltmp.len);
- return (i);
- case MOXA_FIND_BOARD:
- return moxafindcard(dltmp.cardno);
- case MOXA_LOAD_C320B:
- moxaload320b(dltmp.cardno, dltmp.buf, dltmp.len);
- default: /* to keep gcc happy */
- return (0);
- case MOXA_LOAD_CODE:
- i = moxaloadcode(dltmp.cardno, dltmp.buf, dltmp.len);
- if (i == -1)
- return (-EFAULT);
- return (i);
-
- }
-}
-
-int MoxaDriverPoll(void)
-{
- struct moxa_board_conf *brd;
- register ushort temp;
- register int card;
- void __iomem *ofsAddr;
- void __iomem *ip;
- int port, p, ports;
-
- if (moxaCard == 0)
- return (-1);
- for (card = 0; card < MAX_BOARDS; card++) {
- brd = &moxa_boards[card];
- if (brd->loadstat == 0)
- continue;
- if ((ports = brd->numPorts) == 0)
- continue;
- if (readb(brd->intPend) == 0xff) {
- ip = brd->intTable + readb(brd->intNdx);
- p = card * MAX_PORTS_PER_BOARD;
- ports <<= 1;
- for (port = 0; port < ports; port += 2, p++) {
- if ((temp = readw(ip + port)) != 0) {
- writew(0, ip + port);
- ofsAddr = moxa_ports[p].tableAddr;
- if (temp & IntrTx)
- writew(readw(ofsAddr + HostStat) & ~WakeupTx, ofsAddr + HostStat);
- if (temp & IntrBreak) {
- moxa_ports[p].breakCnt++;
- }
- if (temp & IntrLine) {
- if (readb(ofsAddr + FlagStat) & DCD_state) {
- if ((moxa_ports[p].DCDState & DCD_oldstate) == 0)
- moxa_ports[p].DCDState = (DCD_oldstate |
- DCD_changed);
- } else {
- if (moxa_ports[p].DCDState & DCD_oldstate)
- moxa_ports[p].DCDState = DCD_changed;
- }
- }
- }
- }
- writeb(0, brd->intPend);
- }
- if (moxaLowWaterChk) {
- p = card * MAX_PORTS_PER_BOARD;
- for (port = 0; port < ports; port++, p++) {
- if (moxa_ports[p].lowChkFlag) {
- moxa_ports[p].lowChkFlag = 0;
- ofsAddr = moxa_ports[p].tableAddr;
- moxa_low_water_check(ofsAddr);
- }
- }
- }
- }
- moxaLowWaterChk = 0;
- return (0);
-}
-
-/*****************************************************************************
- * Card level function: *
- * 1. MoxaPortsOfCard(int cardno); *
- *****************************************************************************/
-int MoxaPortsOfCard(int cardno)
-{
-
- if (moxa_boards[cardno].boardType == 0)
- return (0);
- return (moxa_boards[cardno].numPorts);
-}
-
-/*****************************************************************************
- * Port level functions: *
- * 1. MoxaPortIsValid(int port); *
- * 2. MoxaPortEnable(int port); *
- * 3. MoxaPortDisable(int port); *
- * 4. MoxaPortGetMaxBaud(int port); *
- * 6. MoxaPortSetBaud(int port, long baud); *
- * 8. MoxaPortSetTermio(int port, unsigned char *termio); *
- * 9. MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); *
- * 10. MoxaPortLineCtrl(int port, int dtrState, int rtsState); *
- * 11. MoxaPortFlowCtrl(int port, int rts, int cts, int rx, int tx,int xany); *
- * 12. MoxaPortLineStatus(int port); *
- * 13. MoxaPortDCDChange(int port); *
- * 14. MoxaPortDCDON(int port); *
- * 15. MoxaPortFlushData(int port, int mode); *
- * 16. MoxaPortWriteData(int port, unsigned char * buffer, int length); *
- * 17. MoxaPortReadData(int port, struct tty_struct *tty); *
- * 20. MoxaPortTxQueue(int port); *
- * 21. MoxaPortTxFree(int port); *
- * 22. MoxaPortRxQueue(int port); *
- * 24. MoxaPortTxDisable(int port); *
- * 25. MoxaPortTxEnable(int port); *
- * 27. MoxaPortResetBrkCnt(int port); *
- * 30. MoxaPortSendBreak(int port, int ticks); *
- *****************************************************************************/
/*
* Moxa Port Number Description:
*
@@ -1733,33 +1637,6 @@ int MoxaPortsOfCard(int cardno)
* -ENOIOCTLCMD
*
*
- * Function 3: Moxa driver polling process routine.
- * Syntax:
- * int MoxaDriverPoll(void);
- *
- * return: 0 ; polling O.K.
- * -1 : no any Moxa card.
- *
- *
- * Function 4: Get the ports of this card.
- * Syntax:
- * int MoxaPortsOfCard(int cardno);
- *
- * int cardno : card number (0 - 3)
- *
- * return: 0 : this card is invalid
- * 8/16/24/32
- *
- *
- * Function 5: Check this port is valid or invalid
- * Syntax:
- * int MoxaPortIsValid(int port);
- * int port : port number (0 - 127, ref port description)
- *
- * return: 0 : this port is invalid
- * 1 : this port is valid
- *
- *
* Function 6: Enable this port to start Tx/Rx data.
* Syntax:
* void MoxaPortEnable(int port);
@@ -1772,18 +1649,9 @@ int MoxaPortsOfCard(int cardno)
* int port : port number (0 - 127)
*
*
- * Function 8: Get the maximun available baud rate of this port.
- * Syntax:
- * long MoxaPortGetMaxBaud(int port);
- * int port : port number (0 - 127)
- *
- * return: 0 : this port is invalid
- * 38400/57600/115200 bps
- *
- *
* Function 10: Setting baud rate of this port.
* Syntax:
- * long MoxaPortSetBaud(int port, long baud);
+ * speed_t MoxaPortSetBaud(int port, speed_t baud);
* int port : port number (0 - 127)
* long baud : baud rate (50 - 115200)
*
@@ -1850,25 +1718,6 @@ int MoxaPortsOfCard(int cardno)
* Bit 2 - DCD state (0: off, 1: on)
*
*
- * Function 17: Check the DCD state has changed since the last read
- * of this function.
- * Syntax:
- * int MoxaPortDCDChange(int port);
- * int port : port number (0 - 127)
- *
- * return: 0 : no changed
- * 1 : DCD has changed
- *
- *
- * Function 18: Check ths current DCD state is ON or not.
- * Syntax:
- * int MoxaPortDCDON(int port);
- * int port : port number (0 - 127)
- *
- * return: 0 : DCD off
- * 1 : DCD on
- *
- *
* Function 19: Flush the Rx/Tx buffer data of this port.
* Syntax:
* void MoxaPortFlushData(int port, int mode);
@@ -1942,40 +1791,20 @@ int MoxaPortsOfCard(int cardno)
* return: 0 - .. : BREAK signal count
*
*
- * Function 34: Send out a BREAK signal.
- * Syntax:
- * void MoxaPortSendBreak(int port, int ms100);
- * int port : port number (0 - 127)
- * int ms100 : break signal time interval.
- * unit: 100 mini-second. if ms100 == 0, it will
- * send out a about 250 ms BREAK signal.
- *
*/
-int MoxaPortIsValid(int port)
-{
-
- if (moxaCard == 0)
- return (0);
- if (moxa_ports[port].chkPort == 0)
- return (0);
- return (1);
-}
-void MoxaPortEnable(int port)
+static void MoxaPortEnable(struct moxa_port *port)
{
void __iomem *ofsAddr;
- int MoxaPortLineStatus(int);
- short lowwater = 512;
+ u16 lowwater = 512;
- ofsAddr = moxa_ports[port].tableAddr;
+ ofsAddr = port->tableAddr;
writew(lowwater, ofsAddr + Low_water);
- moxa_ports[port].breakCnt = 0;
- if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
- (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
+ if (MOXA_IS_320(port->board))
moxafunc(ofsAddr, FC_SetBreakIrq, 0);
- } else {
- writew(readw(ofsAddr + HostStat) | WakeupBreak, ofsAddr + HostStat);
- }
+ else
+ writew(readw(ofsAddr + HostStat) | WakeupBreak,
+ ofsAddr + HostStat);
moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
moxafunc(ofsAddr, FC_FlushQueue, 2);
@@ -1984,9 +1813,9 @@ void MoxaPortEnable(int port)
MoxaPortLineStatus(port);
}
-void MoxaPortDisable(int port)
+static void MoxaPortDisable(struct moxa_port *port)
{
- void __iomem *ofsAddr = moxa_ports[port].tableAddr;
+ void __iomem *ofsAddr = port->tableAddr;
moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
@@ -1994,49 +1823,32 @@ void MoxaPortDisable(int port)
moxafunc(ofsAddr, FC_DisableCH, Magic_code);
}
-long MoxaPortGetMaxBaud(int port)
-{
- if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
- (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI))
- return (460800L);
- else
- return (921600L);
-}
-
-
-long MoxaPortSetBaud(int port, long baud)
+static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
{
- void __iomem *ofsAddr;
- long max, clock;
- unsigned int val;
+ void __iomem *ofsAddr = port->tableAddr;
+ unsigned int clock, val;
+ speed_t max;
- if ((baud < 50L) || ((max = MoxaPortGetMaxBaud(port)) == 0))
- return (0);
- ofsAddr = moxa_ports[port].tableAddr;
+ max = MOXA_IS_320(port->board) ? 460800 : 921600;
+ if (baud < 50)
+ return 0;
if (baud > max)
baud = max;
- if (max == 38400L)
- clock = 614400L; /* for 9.8304 Mhz : max. 38400 bps */
- else if (max == 57600L)
- clock = 691200L; /* for 11.0592 Mhz : max. 57600 bps */
- else
- clock = 921600L; /* for 14.7456 Mhz : max. 115200 bps */
+ clock = 921600;
val = clock / baud;
moxafunc(ofsAddr, FC_SetBaud, val);
baud = clock / val;
- moxa_ports[port].curBaud = baud;
- return (baud);
+ return baud;
}
-int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud)
+static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
+ speed_t baud)
{
void __iomem *ofsAddr;
tcflag_t cflag;
tcflag_t mode = 0;
- if (moxa_ports[port].chkPort == 0 || termio == 0)
- return (-1);
- ofsAddr = moxa_ports[port].tableAddr;
+ ofsAddr = port->tableAddr;
cflag = termio->c_cflag; /* termio->c_cflag */
mode = termio->c_cflag & CSIZE;
@@ -2065,13 +1877,11 @@ int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud)
} else
mode |= MX_PARNONE;
- moxafunc(ofsAddr, FC_SetDataMode, (ushort) mode);
+ moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
+
+ if (MOXA_IS_320(port->board) && baud >= 921600)
+ return -1;
- if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
- (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
- if (baud >= 921600L)
- return (-1);
- }
baud = MoxaPortSetBaud(port, baud);
if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
@@ -2081,51 +1891,37 @@ int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud)
moxa_wait_finish(ofsAddr);
}
- return (baud);
+ return baud;
}
-int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState)
+static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
+ int *rtsState)
{
+ if (dtrState)
+ *dtrState = !!(port->lineCtrl & DTR_ON);
+ if (rtsState)
+ *rtsState = !!(port->lineCtrl & RTS_ON);
- if (!MoxaPortIsValid(port))
- return (-1);
- if (dtrState) {
- if (moxa_ports[port].lineCtrl & DTR_ON)
- *dtrState = 1;
- else
- *dtrState = 0;
- }
- if (rtsState) {
- if (moxa_ports[port].lineCtrl & RTS_ON)
- *rtsState = 1;
- else
- *rtsState = 0;
- }
- return (0);
+ return 0;
}
-void MoxaPortLineCtrl(int port, int dtr, int rts)
+static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
{
- void __iomem *ofsAddr;
- int mode;
+ u8 mode = 0;
- ofsAddr = moxa_ports[port].tableAddr;
- mode = 0;
if (dtr)
mode |= DTR_ON;
if (rts)
mode |= RTS_ON;
- moxa_ports[port].lineCtrl = mode;
- moxafunc(ofsAddr, FC_LineControl, mode);
+ port->lineCtrl = mode;
+ moxafunc(port->tableAddr, FC_LineControl, mode);
}
-void MoxaPortFlowCtrl(int port, int rts, int cts, int txflow, int rxflow, int txany)
+static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
+ int txflow, int rxflow, int txany)
{
- void __iomem *ofsAddr;
- int mode;
+ int mode = 0;
- ofsAddr = moxa_ports[port].tableAddr;
- mode = 0;
if (rts)
mode |= RTS_FlowCtl;
if (cts)
@@ -2136,81 +1932,50 @@ void MoxaPortFlowCtrl(int port, int rts, int cts, int txflow, int rxflow, int tx
mode |= Rx_FlowCtl;
if (txany)
mode |= IXM_IXANY;
- moxafunc(ofsAddr, FC_SetFlowCtl, mode);
+ moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
}
-int MoxaPortLineStatus(int port)
+static int MoxaPortLineStatus(struct moxa_port *port)
{
void __iomem *ofsAddr;
int val;
- ofsAddr = moxa_ports[port].tableAddr;
- if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
- (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
+ ofsAddr = port->tableAddr;
+ if (MOXA_IS_320(port->board)) {
moxafunc(ofsAddr, FC_LineStatus, 0);
val = readw(ofsAddr + FuncArg);
} else {
val = readw(ofsAddr + FlagStat) >> 4;
}
val &= 0x0B;
- if (val & 8) {
+ if (val & 8)
val |= 4;
- if ((moxa_ports[port].DCDState & DCD_oldstate) == 0)
- moxa_ports[port].DCDState = (DCD_oldstate | DCD_changed);
- } else {
- if (moxa_ports[port].DCDState & DCD_oldstate)
- moxa_ports[port].DCDState = DCD_changed;
- }
+ spin_lock_bh(&moxa_lock);
+ moxa_new_dcdstate(port, val & 8);
+ spin_unlock_bh(&moxa_lock);
val &= 7;
- return (val);
-}
-
-int MoxaPortDCDChange(int port)
-{
- int n;
-
- if (moxa_ports[port].chkPort == 0)
- return (0);
- n = moxa_ports[port].DCDState;
- moxa_ports[port].DCDState &= ~DCD_changed;
- n &= DCD_changed;
- return (n);
-}
-
-int MoxaPortDCDON(int port)
-{
- int n;
-
- if (moxa_ports[port].chkPort == 0)
- return (0);
- if (moxa_ports[port].DCDState & DCD_oldstate)
- n = 1;
- else
- n = 0;
- return (n);
+ return val;
}
-int MoxaPortWriteData(int port, unsigned char * buffer, int len)
+static int MoxaPortWriteData(struct moxa_port *port,
+ const unsigned char *buffer, int len)
{
- int c, total, i;
- ushort tail;
- int cnt;
- ushort head, tx_mask, spage, epage;
- ushort pageno, pageofs, bufhead;
void __iomem *baseAddr, *ofsAddr, *ofs;
+ unsigned int c, total;
+ u16 head, tail, tx_mask, spage, epage;
+ u16 pageno, pageofs, bufhead;
- ofsAddr = moxa_ports[port].tableAddr;
- baseAddr = moxa_boards[port / MAX_PORTS_PER_BOARD].basemem;
+ ofsAddr = port->tableAddr;
+ baseAddr = port->board->basemem;
tx_mask = readw(ofsAddr + TX_mask);
spage = readw(ofsAddr + Page_txb);
epage = readw(ofsAddr + EndPage_txb);
tail = readw(ofsAddr + TXwptr);
head = readw(ofsAddr + TXrptr);
- c = (head > tail) ? (head - tail - 1)
- : (head - tail + tx_mask);
+ c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
if (c > len)
c = len;
- moxaLog.txcnt[port] += c;
+ moxaLog.txcnt[port->tty->index] += c;
total = c;
if (spage == epage) {
bufhead = readw(ofsAddr + Ofs_txb);
@@ -2222,249 +1987,179 @@ int MoxaPortWriteData(int port, unsigned char * buffer, int len)
len = tx_mask + 1 - tail;
len = (c > len) ? len : c;
ofs = baseAddr + DynPage_addr + bufhead + tail;
- for (i = 0; i < len; i++)
- writeb(*buffer++, ofs + i);
+ memcpy_toio(ofs, buffer, len);
+ buffer += len;
tail = (tail + len) & tx_mask;
c -= len;
}
- writew(tail, ofsAddr + TXwptr);
} else {
- len = c;
pageno = spage + (tail >> 13);
pageofs = tail & Page_mask;
- do {
- cnt = Page_size - pageofs;
- if (cnt > c)
- cnt = c;
- c -= cnt;
+ while (c > 0) {
+ len = Page_size - pageofs;
+ if (len > c)
+ len = c;
writeb(pageno, baseAddr + Control_reg);
ofs = baseAddr + DynPage_addr + pageofs;
- for (i = 0; i < cnt; i++)
- writeb(*buffer++, ofs + i);
- if (c == 0) {
- writew((tail + len) & tx_mask, ofsAddr + TXwptr);
- break;
- }
+ memcpy_toio(ofs, buffer, len);
+ buffer += len;
if (++pageno == epage)
pageno = spage;
pageofs = 0;
- } while (1);
+ c -= len;
+ }
+ tail = (tail + total) & tx_mask;
}
+ writew(tail, ofsAddr + TXwptr);
writeb(1, ofsAddr + CD180TXirq); /* start to send */
- return (total);
+ return total;
}
-int MoxaPortReadData(int port, struct tty_struct *tty)
+static int MoxaPortReadData(struct moxa_port *port)
{
- register ushort head, pageofs;
- int i, count, cnt, len, total, remain;
- ushort tail, rx_mask, spage, epage;
- ushort pageno, bufhead;
+ struct tty_struct *tty = port->tty;
+ unsigned char *dst;
void __iomem *baseAddr, *ofsAddr, *ofs;
+ unsigned int count, len, total;
+ u16 tail, rx_mask, spage, epage;
+ u16 pageno, pageofs, bufhead, head;
- ofsAddr = moxa_ports[port].tableAddr;
- baseAddr = moxa_boards[port / MAX_PORTS_PER_BOARD].basemem;
+ ofsAddr = port->tableAddr;
+ baseAddr = port->board->basemem;
head = readw(ofsAddr + RXrptr);
tail = readw(ofsAddr + RXwptr);
rx_mask = readw(ofsAddr + RX_mask);
spage = readw(ofsAddr + Page_rxb);
epage = readw(ofsAddr + EndPage_rxb);
- count = (tail >= head) ? (tail - head)
- : (tail - head + rx_mask + 1);
+ count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
if (count == 0)
return 0;
total = count;
- remain = count - total;
- moxaLog.rxcnt[port] += total;
- count = total;
+ moxaLog.rxcnt[tty->index] += total;
if (spage == epage) {
bufhead = readw(ofsAddr + Ofs_rxb);
writew(spage, baseAddr + Control_reg);
while (count > 0) {
- if (tail >= head)
- len = tail - head;
- else
- len = rx_mask + 1 - head;
- len = (count > len) ? len : count;
ofs = baseAddr + DynPage_addr + bufhead + head;
- for (i = 0; i < len; i++)
- tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
+ len = (tail >= head) ? (tail - head) :
+ (rx_mask + 1 - head);
+ len = tty_prepare_flip_string(tty, &dst,
+ min(len, count));
+ memcpy_fromio(dst, ofs, len);
head = (head + len) & rx_mask;
count -= len;
}
- writew(head, ofsAddr + RXrptr);
} else {
- len = count;
pageno = spage + (head >> 13);
pageofs = head & Page_mask;
- do {
- cnt = Page_size - pageofs;
- if (cnt > count)
- cnt = count;
- count -= cnt;
+ while (count > 0) {
writew(pageno, baseAddr + Control_reg);
ofs = baseAddr + DynPage_addr + pageofs;
- for (i = 0; i < cnt; i++)
- tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
- if (count == 0) {
- writew((head + len) & rx_mask, ofsAddr + RXrptr);
- break;
- }
- if (++pageno == epage)
+ len = tty_prepare_flip_string(tty, &dst,
+ min(Page_size - pageofs, count));
+ memcpy_fromio(dst, ofs, len);
+
+ count -= len;
+ pageofs = (pageofs + len) & Page_mask;
+ if (pageofs == 0 && ++pageno == epage)
pageno = spage;
- pageofs = 0;
- } while (1);
+ }
+ head = (head + total) & rx_mask;
}
- if ((readb(ofsAddr + FlagStat) & Xoff_state) && (remain < LowWater)) {
+ writew(head, ofsAddr + RXrptr);
+ if (readb(ofsAddr + FlagStat) & Xoff_state) {
moxaLowWaterChk = 1;
- moxa_ports[port].lowChkFlag = 1;
+ port->lowChkFlag = 1;
}
- return (total);
+ return total;
}
-int MoxaPortTxQueue(int port)
+static int MoxaPortTxQueue(struct moxa_port *port)
{
- void __iomem *ofsAddr;
- ushort rptr, wptr, mask;
- int len;
+ void __iomem *ofsAddr = port->tableAddr;
+ u16 rptr, wptr, mask;
- ofsAddr = moxa_ports[port].tableAddr;
rptr = readw(ofsAddr + TXrptr);
wptr = readw(ofsAddr + TXwptr);
mask = readw(ofsAddr + TX_mask);
- len = (wptr - rptr) & mask;
- return (len);
+ return (wptr - rptr) & mask;
}
-int MoxaPortTxFree(int port)
+static int MoxaPortTxFree(struct moxa_port *port)
{
- void __iomem *ofsAddr;
- ushort rptr, wptr, mask;
- int len;
+ void __iomem *ofsAddr = port->tableAddr;
+ u16 rptr, wptr, mask;
- ofsAddr = moxa_ports[port].tableAddr;
rptr = readw(ofsAddr + TXrptr);
wptr = readw(ofsAddr + TXwptr);
mask = readw(ofsAddr + TX_mask);
- len = mask - ((wptr - rptr) & mask);
- return (len);
+ return mask - ((wptr - rptr) & mask);
}
-int MoxaPortRxQueue(int port)
+static int MoxaPortRxQueue(struct moxa_port *port)
{
- void __iomem *ofsAddr;
- ushort rptr, wptr, mask;
- int len;
+ void __iomem *ofsAddr = port->tableAddr;
+ u16 rptr, wptr, mask;
- ofsAddr = moxa_ports[port].tableAddr;
rptr = readw(ofsAddr + RXrptr);
wptr = readw(ofsAddr + RXwptr);
mask = readw(ofsAddr + RX_mask);
- len = (wptr - rptr) & mask;
- return (len);
+ return (wptr - rptr) & mask;
}
-
-void MoxaPortTxDisable(int port)
+static void MoxaPortTxDisable(struct moxa_port *port)
{
- void __iomem *ofsAddr;
-
- ofsAddr = moxa_ports[port].tableAddr;
- moxafunc(ofsAddr, FC_SetXoffState, Magic_code);
+ moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
}
-void MoxaPortTxEnable(int port)
+static void MoxaPortTxEnable(struct moxa_port *port)
{
- void __iomem *ofsAddr;
-
- ofsAddr = moxa_ports[port].tableAddr;
- moxafunc(ofsAddr, FC_SetXonState, Magic_code);
-}
-
-
-int MoxaPortResetBrkCnt(int port)
-{
- ushort cnt;
- cnt = moxa_ports[port].breakCnt;
- moxa_ports[port].breakCnt = 0;
- return (cnt);
-}
-
-
-void MoxaPortSendBreak(int port, int ms100)
-{
- void __iomem *ofsAddr;
-
- ofsAddr = moxa_ports[port].tableAddr;
- if (ms100) {
- moxafunc(ofsAddr, FC_SendBreak, Magic_code);
- msleep(ms100 * 10);
- } else {
- moxafunc(ofsAddr, FC_SendBreak, Magic_code);
- msleep(250);
- }
- moxafunc(ofsAddr, FC_StopBreak, Magic_code);
+ moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
}
static int moxa_get_serial_info(struct moxa_port *info,
- struct serial_struct __user *retinfo)
+ struct serial_struct __user *retinfo)
{
- struct serial_struct tmp;
-
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->port;
- tmp.port = 0;
- tmp.irq = 0;
- tmp.flags = info->asyncflags;
- tmp.baud_base = 921600;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
- tmp.custom_divisor = 0;
- tmp.hub6 = 0;
- if(copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
- return (0);
+ struct serial_struct tmp = {
+ .type = info->type,
+ .line = info->tty->index,
+ .flags = info->asyncflags,
+ .baud_base = 921600,
+ .close_delay = info->close_delay
+ };
+ return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
}
static int moxa_set_serial_info(struct moxa_port *info,
- struct serial_struct __user *new_info)
+ struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
- if(copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
- if ((new_serial.irq != 0) ||
- (new_serial.port != 0) ||
-// (new_serial.type != info->type) ||
- (new_serial.custom_divisor != 0) ||
- (new_serial.baud_base != 921600))
- return (-EPERM);
+ if (new_serial.irq != 0 || new_serial.port != 0 ||
+ new_serial.custom_divisor != 0 ||
+ new_serial.baud_base != 921600)
+ return -EPERM;
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
(info->asyncflags & ~ASYNC_USR_MASK)))
- return (-EPERM);
- } else {
+ return -EPERM;
+ } else
info->close_delay = new_serial.close_delay * HZ / 100;
- info->closing_wait = new_serial.closing_wait * HZ / 100;
- }
new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
new_serial.flags |= (info->asyncflags & ASYNC_FLAGS);
- if (new_serial.type == PORT_16550A) {
- MoxaSetFifo(info->port, 1);
- } else {
- MoxaSetFifo(info->port, 0);
- }
+ MoxaSetFifo(info, new_serial.type == PORT_16550A);
info->type = new_serial.type;
- return (0);
+ return 0;
}
@@ -2472,374 +2167,10 @@ static int moxa_set_serial_info(struct moxa_port *info,
/*****************************************************************************
* Static local functions: *
*****************************************************************************/
-static void moxafunc(void __iomem *ofsAddr, int cmd, ushort arg)
-{
-
- writew(arg, ofsAddr + FuncArg);
- writew(cmd, ofsAddr + FuncCode);
- moxa_wait_finish(ofsAddr);
-}
-
-static void moxa_wait_finish(void __iomem *ofsAddr)
-{
- unsigned long i, j;
-
- i = jiffies;
- while (readw(ofsAddr + FuncCode) != 0) {
- j = jiffies;
- if ((j - i) > moxaFuncTout) {
- return;
- }
- }
-}
-
-static void moxa_low_water_check(void __iomem *ofsAddr)
-{
- int len;
- ushort rptr, wptr, mask;
-
- if (readb(ofsAddr + FlagStat) & Xoff_state) {
- rptr = readw(ofsAddr + RXrptr);
- wptr = readw(ofsAddr + RXwptr);
- mask = readw(ofsAddr + RX_mask);
- len = (wptr - rptr) & mask;
- if (len <= Low_water)
- moxafunc(ofsAddr, FC_SendXon, 0);
- }
-}
-
-static int moxaloadbios(int cardno, unsigned char __user *tmp, int len)
-{
- void __iomem *baseAddr;
- int i;
-
- if(len < 0 || len > sizeof(moxaBuff))
- return -EINVAL;
- if(copy_from_user(moxaBuff, tmp, len))
- return -EFAULT;
- baseAddr = moxa_boards[cardno].basemem;
- writeb(HW_reset, baseAddr + Control_reg); /* reset */
- msleep(10);
- for (i = 0; i < 4096; i++)
- writeb(0, baseAddr + i); /* clear fix page */
- for (i = 0; i < len; i++)
- writeb(moxaBuff[i], baseAddr + i); /* download BIOS */
- writeb(0, baseAddr + Control_reg); /* restart */
- return (0);
-}
-
-static int moxafindcard(int cardno)
-{
- void __iomem *baseAddr;
- ushort tmp;
-
- baseAddr = moxa_boards[cardno].basemem;
- switch (moxa_boards[cardno].boardType) {
- case MOXA_BOARD_C218_ISA:
- case MOXA_BOARD_C218_PCI:
- if ((tmp = readw(baseAddr + C218_key)) != C218_KeyCode) {
- return (-1);
- }
- break;
- case MOXA_BOARD_CP204J:
- if ((tmp = readw(baseAddr + C218_key)) != CP204J_KeyCode) {
- return (-1);
- }
- break;
- default:
- if ((tmp = readw(baseAddr + C320_key)) != C320_KeyCode) {
- return (-1);
- }
- if ((tmp = readw(baseAddr + C320_status)) != STS_init) {
- return (-2);
- }
- }
- return (0);
-}
-
-static int moxaload320b(int cardno, unsigned char __user *tmp, int len)
-{
- void __iomem *baseAddr;
- int i;
-
- if(len < 0 || len > sizeof(moxaBuff))
- return -EINVAL;
- if(copy_from_user(moxaBuff, tmp, len))
- return -EFAULT;
- baseAddr = moxa_boards[cardno].basemem;
- writew(len - 7168 - 2, baseAddr + C320bapi_len);
- writeb(1, baseAddr + Control_reg); /* Select Page 1 */
- for (i = 0; i < 7168; i++)
- writeb(moxaBuff[i], baseAddr + DynPage_addr + i);
- writeb(2, baseAddr + Control_reg); /* Select Page 2 */
- for (i = 0; i < (len - 7168); i++)
- writeb(moxaBuff[i + 7168], baseAddr + DynPage_addr + i);
- return (0);
-}
-
-static int moxaloadcode(int cardno, unsigned char __user *tmp, int len)
-{
- void __iomem *baseAddr, *ofsAddr;
- int retval, port, i;
-
- if(len < 0 || len > sizeof(moxaBuff))
- return -EINVAL;
- if(copy_from_user(moxaBuff, tmp, len))
- return -EFAULT;
- baseAddr = moxa_boards[cardno].basemem;
- switch (moxa_boards[cardno].boardType) {
- case MOXA_BOARD_C218_ISA:
- case MOXA_BOARD_C218_PCI:
- case MOXA_BOARD_CP204J:
- retval = moxaloadc218(cardno, baseAddr, len);
- if (retval)
- return (retval);
- port = cardno * MAX_PORTS_PER_BOARD;
- for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) {
- struct moxa_port *p = &moxa_ports[port];
-
- p->chkPort = 1;
- p->curBaud = 9600L;
- p->DCDState = 0;
- p->tableAddr = baseAddr + Extern_table + Extern_size * i;
- ofsAddr = p->tableAddr;
- writew(C218rx_mask, ofsAddr + RX_mask);
- writew(C218tx_mask, ofsAddr + TX_mask);
- writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
- writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
-
- writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
- writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
-
- }
- break;
- default:
- retval = moxaloadc320(cardno, baseAddr, len,
- &moxa_boards[cardno].numPorts);
- if (retval)
- return (retval);
- port = cardno * MAX_PORTS_PER_BOARD;
- for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) {
- struct moxa_port *p = &moxa_ports[port];
-
- p->chkPort = 1;
- p->curBaud = 9600L;
- p->DCDState = 0;
- p->tableAddr = baseAddr + Extern_table + Extern_size * i;
- ofsAddr = p->tableAddr;
- if (moxa_boards[cardno].numPorts == 8) {
- writew(C320p8rx_mask, ofsAddr + RX_mask);
- writew(C320p8tx_mask, ofsAddr + TX_mask);
- writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
- writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
- writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
- writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
-
- } else if (moxa_boards[cardno].numPorts == 16) {
- writew(C320p16rx_mask, ofsAddr + RX_mask);
- writew(C320p16tx_mask, ofsAddr + TX_mask);
- writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
- writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
- writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
- writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
-
- } else if (moxa_boards[cardno].numPorts == 24) {
- writew(C320p24rx_mask, ofsAddr + RX_mask);
- writew(C320p24tx_mask, ofsAddr + TX_mask);
- writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
- writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
- writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
- writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
- } else if (moxa_boards[cardno].numPorts == 32) {
- writew(C320p32rx_mask, ofsAddr + RX_mask);
- writew(C320p32tx_mask, ofsAddr + TX_mask);
- writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
- writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
- writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
- writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
- writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
- }
- }
- break;
- }
- moxa_boards[cardno].loadstat = 1;
- return (0);
-}
-
-static int moxaloadc218(int cardno, void __iomem *baseAddr, int len)
-{
- char retry;
- int i, j, len1, len2;
- ushort usum, *ptr, keycode;
-
- if (moxa_boards[cardno].boardType == MOXA_BOARD_CP204J)
- keycode = CP204J_KeyCode;
- else
- keycode = C218_KeyCode;
- usum = 0;
- len1 = len >> 1;
- ptr = (ushort *) moxaBuff;
- for (i = 0; i < len1; i++)
- usum += le16_to_cpu(*(ptr + i));
- retry = 0;
- do {
- len1 = len >> 1;
- j = 0;
- while (len1) {
- len2 = (len1 > 2048) ? 2048 : len1;
- len1 -= len2;
- for (i = 0; i < len2 << 1; i++)
- writeb(moxaBuff[i + j], baseAddr + C218_LoadBuf + i);
- j += i;
-
- writew(len2, baseAddr + C218DLoad_len);
- writew(0, baseAddr + C218_key);
- for (i = 0; i < 100; i++) {
- if (readw(baseAddr + C218_key) == keycode)
- break;
- msleep(10);
- }
- if (readw(baseAddr + C218_key) != keycode) {
- return (-1);
- }
- }
- writew(0, baseAddr + C218DLoad_len);
- writew(usum, baseAddr + C218check_sum);
- writew(0, baseAddr + C218_key);
- for (i = 0; i < 100; i++) {
- if (readw(baseAddr + C218_key) == keycode)
- break;
- msleep(10);
- }
- retry++;
- } while ((readb(baseAddr + C218chksum_ok) != 1) && (retry < 3));
- if (readb(baseAddr + C218chksum_ok) != 1) {
- return (-1);
- }
- writew(0, baseAddr + C218_key);
- for (i = 0; i < 100; i++) {
- if (readw(baseAddr + Magic_no) == Magic_code)
- break;
- msleep(10);
- }
- if (readw(baseAddr + Magic_no) != Magic_code) {
- return (-1);
- }
- writew(1, baseAddr + Disable_IRQ);
- writew(0, baseAddr + Magic_no);
- for (i = 0; i < 100; i++) {
- if (readw(baseAddr + Magic_no) == Magic_code)
- break;
- msleep(10);
- }
- if (readw(baseAddr + Magic_no) != Magic_code) {
- return (-1);
- }
- moxaCard = 1;
- moxa_boards[cardno].intNdx = baseAddr + IRQindex;
- moxa_boards[cardno].intPend = baseAddr + IRQpending;
- moxa_boards[cardno].intTable = baseAddr + IRQtable;
- return (0);
-}
-
-static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPorts)
-{
- ushort usum;
- int i, j, wlen, len2, retry;
- ushort *uptr;
-
- usum = 0;
- wlen = len >> 1;
- uptr = (ushort *) moxaBuff;
- for (i = 0; i < wlen; i++)
- usum += le16_to_cpu(uptr[i]);
- retry = 0;
- j = 0;
- do {
- while (wlen) {
- if (wlen > 2048)
- len2 = 2048;
- else
- len2 = wlen;
- wlen -= len2;
- len2 <<= 1;
- for (i = 0; i < len2; i++)
- writeb(moxaBuff[j + i], baseAddr + C320_LoadBuf + i);
- len2 >>= 1;
- j += i;
- writew(len2, baseAddr + C320DLoad_len);
- writew(0, baseAddr + C320_key);
- for (i = 0; i < 10; i++) {
- if (readw(baseAddr + C320_key) == C320_KeyCode)
- break;
- msleep(10);
- }
- if (readw(baseAddr + C320_key) != C320_KeyCode)
- return (-1);
- }
- writew(0, baseAddr + C320DLoad_len);
- writew(usum, baseAddr + C320check_sum);
- writew(0, baseAddr + C320_key);
- for (i = 0; i < 10; i++) {
- if (readw(baseAddr + C320_key) == C320_KeyCode)
- break;
- msleep(10);
- }
- retry++;
- } while ((readb(baseAddr + C320chksum_ok) != 1) && (retry < 3));
- if (readb(baseAddr + C320chksum_ok) != 1)
- return (-1);
- writew(0, baseAddr + C320_key);
- for (i = 0; i < 600; i++) {
- if (readw(baseAddr + Magic_no) == Magic_code)
- break;
- msleep(10);
- }
- if (readw(baseAddr + Magic_no) != Magic_code)
- return (-100);
-
- if (moxa_boards[cardno].busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
- writew(0x3800, baseAddr + TMS320_PORT1);
- writew(0x3900, baseAddr + TMS320_PORT2);
- writew(28499, baseAddr + TMS320_CLOCK);
- } else {
- writew(0x3200, baseAddr + TMS320_PORT1);
- writew(0x3400, baseAddr + TMS320_PORT2);
- writew(19999, baseAddr + TMS320_CLOCK);
- }
- writew(1, baseAddr + Disable_IRQ);
- writew(0, baseAddr + Magic_no);
- for (i = 0; i < 500; i++) {
- if (readw(baseAddr + Magic_no) == Magic_code)
- break;
- msleep(10);
- }
- if (readw(baseAddr + Magic_no) != Magic_code)
- return (-102);
-
- j = readw(baseAddr + Module_cnt);
- if (j <= 0)
- return (-101);
- *numPorts = j * 8;
- writew(j, baseAddr + Module_no);
- writew(0, baseAddr + Magic_no);
- for (i = 0; i < 600; i++) {
- if (readw(baseAddr + Magic_no) == Magic_code)
- break;
- msleep(10);
- }
- if (readw(baseAddr + Magic_no) != Magic_code)
- return (-102);
- moxaCard = 1;
- moxa_boards[cardno].intNdx = baseAddr + IRQindex;
- moxa_boards[cardno].intPend = baseAddr + IRQpending;
- moxa_boards[cardno].intTable = baseAddr + IRQtable;
- return (0);
-}
-static void MoxaSetFifo(int port, int enable)
+static void MoxaSetFifo(struct moxa_port *port, int enable)
{
- void __iomem *ofsAddr = moxa_ports[port].tableAddr;
+ void __iomem *ofsAddr = port->tableAddr;
if (!enable) {
moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
diff --git a/drivers/char/moxa.h b/drivers/char/moxa.h
new file mode 100644
index 00000000000..87d16ce57be
--- /dev/null
+++ b/drivers/char/moxa.h
@@ -0,0 +1,304 @@
+#ifndef MOXA_H_FILE
+#define MOXA_H_FILE
+
+#define MOXA 0x400
+#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */
+#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */
+#define MOXA_GETDATACOUNT (MOXA + 23)
+#define MOXA_GET_IOQUEUE (MOXA + 27)
+#define MOXA_FLUSH_QUEUE (MOXA + 28)
+#define MOXA_GETMSTATUS (MOXA + 65)
+
+/*
+ * System Configuration
+ */
+
+#define Magic_code 0x404
+
+/*
+ * for C218 BIOS initialization
+ */
+#define C218_ConfBase 0x800
+#define C218_status (C218_ConfBase + 0) /* BIOS running status */
+#define C218_diag (C218_ConfBase + 2) /* diagnostic status */
+#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */
+#define C218DLoad_len (C218_ConfBase + 6) /* WORD */
+#define C218check_sum (C218_ConfBase + 8) /* BYTE */
+#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */
+#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */
+#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */
+#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */
+#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */
+
+#define C218_LoadBuf 0x0F00
+#define C218_KeyCode 0x218
+#define CP204J_KeyCode 0x204
+
+/*
+ * for C320 BIOS initialization
+ */
+#define C320_ConfBase 0x800
+#define C320_LoadBuf 0x0f00
+#define STS_init 0x05 /* for C320_status */
+
+#define C320_status C320_ConfBase + 0 /* BIOS running status */
+#define C320_diag C320_ConfBase + 2 /* diagnostic status */
+#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */
+#define C320DLoad_len C320_ConfBase + 6 /* WORD */
+#define C320check_sum C320_ConfBase + 8 /* WORD */
+#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */
+#define C320bapi_len C320_ConfBase + 0x0c /* WORD */
+#define C320UART_no C320_ConfBase + 0x0e /* WORD */
+
+#define C320_KeyCode 0x320
+
+#define FixPage_addr 0x0000 /* starting addr of static page */
+#define DynPage_addr 0x2000 /* starting addr of dynamic page */
+#define C218_start 0x3000 /* starting addr of C218 BIOS prg */
+#define Control_reg 0x1ff0 /* select page and reset control */
+#define HW_reset 0x80
+
+/*
+ * Function Codes
+ */
+#define FC_CardReset 0x80
+#define FC_ChannelReset 1 /* C320 firmware not supported */
+#define FC_EnableCH 2
+#define FC_DisableCH 3
+#define FC_SetParam 4
+#define FC_SetMode 5
+#define FC_SetRate 6
+#define FC_LineControl 7
+#define FC_LineStatus 8
+#define FC_XmitControl 9
+#define FC_FlushQueue 10
+#define FC_SendBreak 11
+#define FC_StopBreak 12
+#define FC_LoopbackON 13
+#define FC_LoopbackOFF 14
+#define FC_ClrIrqTable 15
+#define FC_SendXon 16
+#define FC_SetTermIrq 17 /* C320 firmware not supported */
+#define FC_SetCntIrq 18 /* C320 firmware not supported */
+#define FC_SetBreakIrq 19
+#define FC_SetLineIrq 20
+#define FC_SetFlowCtl 21
+#define FC_GenIrq 22
+#define FC_InCD180 23
+#define FC_OutCD180 24
+#define FC_InUARTreg 23
+#define FC_OutUARTreg 24
+#define FC_SetXonXoff 25
+#define FC_OutCD180CCR 26
+#define FC_ExtIQueue 27
+#define FC_ExtOQueue 28
+#define FC_ClrLineIrq 29
+#define FC_HWFlowCtl 30
+#define FC_GetClockRate 35
+#define FC_SetBaud 36
+#define FC_SetDataMode 41
+#define FC_GetCCSR 43
+#define FC_GetDataError 45
+#define FC_RxControl 50
+#define FC_ImmSend 51
+#define FC_SetXonState 52
+#define FC_SetXoffState 53
+#define FC_SetRxFIFOTrig 54
+#define FC_SetTxFIFOCnt 55
+#define FC_UnixRate 56
+#define FC_UnixResetTimer 57
+
+#define RxFIFOTrig1 0
+#define RxFIFOTrig4 1
+#define RxFIFOTrig8 2
+#define RxFIFOTrig14 3
+
+/*
+ * Dual-Ported RAM
+ */
+#define DRAM_global 0
+#define INT_data (DRAM_global + 0)
+#define Config_base (DRAM_global + 0x108)
+
+#define IRQindex (INT_data + 0)
+#define IRQpending (INT_data + 4)
+#define IRQtable (INT_data + 8)
+
+/*
+ * Interrupt Status
+ */
+#define IntrRx 0x01 /* receiver data O.K. */
+#define IntrTx 0x02 /* transmit buffer empty */
+#define IntrFunc 0x04 /* function complete */
+#define IntrBreak 0x08 /* received break */
+#define IntrLine 0x10 /* line status change
+ for transmitter */
+#define IntrIntr 0x20 /* received INTR code */
+#define IntrQuit 0x40 /* received QUIT code */
+#define IntrEOF 0x80 /* received EOF code */
+
+#define IntrRxTrigger 0x100 /* rx data count reach tigger value */
+#define IntrTxTrigger 0x200 /* tx data count below trigger value */
+
+#define Magic_no (Config_base + 0)
+#define Card_model_no (Config_base + 2)
+#define Total_ports (Config_base + 4)
+#define Module_cnt (Config_base + 8)
+#define Module_no (Config_base + 10)
+#define Timer_10ms (Config_base + 14)
+#define Disable_IRQ (Config_base + 20)
+#define TMS320_PORT1 (Config_base + 22)
+#define TMS320_PORT2 (Config_base + 24)
+#define TMS320_CLOCK (Config_base + 26)
+
+/*
+ * DATA BUFFER in DRAM
+ */
+#define Extern_table 0x400 /* Base address of the external table
+ (24 words * 64) total 3K bytes
+ (24 words * 128) total 6K bytes */
+#define Extern_size 0x60 /* 96 bytes */
+#define RXrptr 0x00 /* read pointer for RX buffer */
+#define RXwptr 0x02 /* write pointer for RX buffer */
+#define TXrptr 0x04 /* read pointer for TX buffer */
+#define TXwptr 0x06 /* write pointer for TX buffer */
+#define HostStat 0x08 /* IRQ flag and general flag */
+#define FlagStat 0x0A
+#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */
+ /* x x x x | | | | */
+ /* | | | + CTS flow */
+ /* | | +--- RTS flow */
+ /* | +------ TX Xon/Xoff */
+ /* +--------- RX Xon/Xoff */
+#define Break_cnt 0x0E /* received break count */
+#define CD180TXirq 0x10 /* if non-0: enable TX irq */
+#define RX_mask 0x12
+#define TX_mask 0x14
+#define Ofs_rxb 0x16
+#define Ofs_txb 0x18
+#define Page_rxb 0x1A
+#define Page_txb 0x1C
+#define EndPage_rxb 0x1E
+#define EndPage_txb 0x20
+#define Data_error 0x22
+#define RxTrigger 0x28
+#define TxTrigger 0x2a
+
+#define rRXwptr 0x34
+#define Low_water 0x36
+
+#define FuncCode 0x40
+#define FuncArg 0x42
+#define FuncArg1 0x44
+
+#define C218rx_size 0x2000 /* 8K bytes */
+#define C218tx_size 0x8000 /* 32K bytes */
+
+#define C218rx_mask (C218rx_size - 1)
+#define C218tx_mask (C218tx_size - 1)
+
+#define C320p8rx_size 0x2000
+#define C320p8tx_size 0x8000
+#define C320p8rx_mask (C320p8rx_size - 1)
+#define C320p8tx_mask (C320p8tx_size - 1)
+
+#define C320p16rx_size 0x2000
+#define C320p16tx_size 0x4000
+#define C320p16rx_mask (C320p16rx_size - 1)
+#define C320p16tx_mask (C320p16tx_size - 1)
+
+#define C320p24rx_size 0x2000
+#define C320p24tx_size 0x2000
+#define C320p24rx_mask (C320p24rx_size - 1)
+#define C320p24tx_mask (C320p24tx_size - 1)
+
+#define C320p32rx_size 0x1000
+#define C320p32tx_size 0x1000
+#define C320p32rx_mask (C320p32rx_size - 1)
+#define C320p32tx_mask (C320p32tx_size - 1)
+
+#define Page_size 0x2000U
+#define Page_mask (Page_size - 1)
+#define C218rx_spage 3
+#define C218tx_spage 4
+#define C218rx_pageno 1
+#define C218tx_pageno 4
+#define C218buf_pageno 5
+
+#define C320p8rx_spage 3
+#define C320p8tx_spage 4
+#define C320p8rx_pgno 1
+#define C320p8tx_pgno 4
+#define C320p8buf_pgno 5
+
+#define C320p16rx_spage 3
+#define C320p16tx_spage 4
+#define C320p16rx_pgno 1
+#define C320p16tx_pgno 2
+#define C320p16buf_pgno 3
+
+#define C320p24rx_spage 3
+#define C320p24tx_spage 4
+#define C320p24rx_pgno 1
+#define C320p24tx_pgno 1
+#define C320p24buf_pgno 2
+
+#define C320p32rx_spage 3
+#define C320p32tx_ofs C320p32rx_size
+#define C320p32tx_spage 3
+#define C320p32buf_pgno 1
+
+/*
+ * Host Status
+ */
+#define WakeupRx 0x01
+#define WakeupTx 0x02
+#define WakeupBreak 0x08
+#define WakeupLine 0x10
+#define WakeupIntr 0x20
+#define WakeupQuit 0x40
+#define WakeupEOF 0x80 /* used in VTIME control */
+#define WakeupRxTrigger 0x100
+#define WakeupTxTrigger 0x200
+/*
+ * Flag status
+ */
+#define Rx_over 0x01
+#define Xoff_state 0x02
+#define Tx_flowOff 0x04
+#define Tx_enable 0x08
+#define CTS_state 0x10
+#define DSR_state 0x20
+#define DCD_state 0x80
+/*
+ * FlowControl
+ */
+#define CTS_FlowCtl 1
+#define RTS_FlowCtl 2
+#define Tx_FlowCtl 4
+#define Rx_FlowCtl 8
+#define IXM_IXANY 0x10
+
+#define LowWater 128
+
+#define DTR_ON 1
+#define RTS_ON 2
+#define CTS_ON 1
+#define DSR_ON 2
+#define DCD_ON 8
+
+/* mode definition */
+#define MX_CS8 0x03
+#define MX_CS7 0x02
+#define MX_CS6 0x01
+#define MX_CS5 0x00
+
+#define MX_STOP1 0x00
+#define MX_STOP15 0x04
+#define MX_STOP2 0x08
+
+#define MX_PARNONE 0x00
+#define MX_PAREVEN 0x40
+#define MX_PARODD 0xC0
+
+#endif
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index ff146c2b08f..fe2a95b5d3c 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -180,7 +180,7 @@ mspec_close(struct vm_area_struct *vma)
my_page = vdata->maddr[index];
vdata->maddr[index] = 0;
if (!mspec_zero_block(my_page, PAGE_SIZE))
- uncached_free_page(my_page);
+ uncached_free_page(my_page, 1);
else
printk(KERN_WARNING "mspec_close(): "
"failed to zero page %ld\n", my_page);
@@ -209,7 +209,7 @@ mspec_nopfn(struct vm_area_struct *vma, unsigned long address)
index = (address - vdata->vm_start) >> PAGE_SHIFT;
maddr = (volatile unsigned long) vdata->maddr[index];
if (maddr == 0) {
- maddr = uncached_alloc_page(numa_node_id());
+ maddr = uncached_alloc_page(numa_node_id(), 1);
if (maddr == 0)
return NOPFN_OOM;
@@ -218,7 +218,7 @@ mspec_nopfn(struct vm_area_struct *vma, unsigned long address)
vdata->count++;
vdata->maddr[index] = maddr;
} else {
- uncached_free_page(maddr);
+ uncached_free_page(maddr, 1);
maddr = vdata->maddr[index];
}
spin_unlock(&vdata->lock);
@@ -367,7 +367,7 @@ mspec_init(void)
int nasid;
unsigned long phys;
- scratch_page[nid] = uncached_alloc_page(nid);
+ scratch_page[nid] = uncached_alloc_page(nid, 1);
if (scratch_page[nid] == 0)
goto free_scratch_pages;
phys = __pa(scratch_page[nid]);
@@ -414,7 +414,7 @@ mspec_init(void)
free_scratch_pages:
for_each_node(nid) {
if (scratch_page[nid] != 0)
- uncached_free_page(scratch_page[nid]);
+ uncached_free_page(scratch_page[nid], 1);
}
return ret;
}
@@ -431,7 +431,7 @@ mspec_exit(void)
for_each_node(nid) {
if (scratch_page[nid] != 0)
- uncached_free_page(scratch_page[nid]);
+ uncached_free_page(scratch_page[nid], 1);
}
}
}
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 68c2e923469..4b81a85c5b5 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -307,6 +307,200 @@ static unsigned char mxser_msr[MXSER_PORTS + 1];
static struct mxser_mon_ext mon_data_ext;
static int mxser_set_baud_method[MXSER_PORTS + 1];
+static void mxser_enable_must_enchance_mode(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr |= MOXA_MUST_EFR_EFRB_ENABLE;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_enchance_mode(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK0;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(value, baseio + MOXA_MUST_XON1_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK0;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_fifo_value(struct mxser_port *info)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(info->ioaddr + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
+
+ efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK1;
+
+ outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
+ outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
+ outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
+ outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
+ outb(oldlcr, info->ioaddr + UART_LCR);
+}
+
+static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK2;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_BANK_MASK;
+ efr |= MOXA_MUST_EFR_BANK2;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ *pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_MASK;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+ efr |= MOXA_MUST_EFR_SF_TX1;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
+ efr |= MOXA_MUST_EFR_SF_RX1;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
+{
+ u8 oldlcr;
+ u8 efr;
+
+ oldlcr = inb(baseio + UART_LCR);
+ outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+ efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+ efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
+
+ outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+ outb(oldlcr, baseio + UART_LCR);
+}
+
#ifdef CONFIG_PCI
static int __devinit CheckIsMoxaMust(unsigned long io)
{
@@ -314,16 +508,16 @@ static int __devinit CheckIsMoxaMust(unsigned long io)
int i;
outb(0, io + UART_LCR);
- DISABLE_MOXA_MUST_ENCHANCE_MODE(io);
+ mxser_disable_must_enchance_mode(io);
oldmcr = inb(io + UART_MCR);
outb(0, io + UART_MCR);
- SET_MOXA_MUST_XON1_VALUE(io, 0x11);
+ mxser_set_must_xon1_value(io, 0x11);
if ((hwid = inb(io + UART_MCR)) != 0) {
outb(oldmcr, io + UART_MCR);
return MOXA_OTHER_UART;
}
- GET_MOXA_MUST_HARDWARE_ID(io, &hwid);
+ mxser_get_must_hardware_id(io, &hwid);
for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
if (hwid == Gpci_uart_info[i].type)
return (int)hwid;
@@ -494,10 +688,10 @@ static int mxser_set_baud(struct mxser_port *info, long newspd)
} else
quot /= newspd;
- SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, quot);
+ mxser_set_must_enum_value(info->ioaddr, quot);
} else
#endif
- SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, 0);
+ mxser_set_must_enum_value(info->ioaddr, 0);
return 0;
}
@@ -553,14 +747,14 @@ static int mxser_change_speed(struct mxser_port *info,
if (info->board->chip_flag) {
fcr = UART_FCR_ENABLE_FIFO;
fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
- SET_MOXA_MUST_FIFO_VALUE(info);
+ mxser_set_must_fifo_value(info);
} else
fcr = 0;
} else {
fcr = UART_FCR_ENABLE_FIFO;
if (info->board->chip_flag) {
fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
- SET_MOXA_MUST_FIFO_VALUE(info);
+ mxser_set_must_fifo_value(info);
} else {
switch (info->rx_trigger) {
case 1:
@@ -657,17 +851,21 @@ static int mxser_change_speed(struct mxser_port *info,
}
}
if (info->board->chip_flag) {
- SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty));
- SET_MOXA_MUST_XOFF1_VALUE(info->ioaddr, STOP_CHAR(info->tty));
+ mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->tty));
+ mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->tty));
if (I_IXON(info->tty)) {
- ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ mxser_enable_must_rx_software_flow_control(
+ info->ioaddr);
} else {
- DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ mxser_disable_must_rx_software_flow_control(
+ info->ioaddr);
}
if (I_IXOFF(info->tty)) {
- ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ mxser_enable_must_tx_software_flow_control(
+ info->ioaddr);
} else {
- DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ mxser_disable_must_tx_software_flow_control(
+ info->ioaddr);
}
}
@@ -927,6 +1125,27 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
return 0;
}
+static void mxser_flush_buffer(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ char fcr;
+ unsigned long flags;
+
+
+ spin_lock_irqsave(&info->slock, flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ fcr = inb(info->ioaddr + UART_FCR);
+ outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
+ info->ioaddr + UART_FCR);
+ outb(fcr, info->ioaddr + UART_FCR);
+
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ tty_wakeup(tty);
+}
+
+
/*
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
@@ -1013,9 +1232,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
}
mxser_shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
-
+ mxser_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
@@ -1072,16 +1289,16 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou
return total;
}
-static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
+static int mxser_put_char(struct tty_struct *tty, unsigned char ch)
{
struct mxser_port *info = tty->driver_data;
unsigned long flags;
if (!info->xmit_buf)
- return;
+ return 0;
if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
- return;
+ return 0;
spin_lock_irqsave(&info->slock, flags);
info->xmit_buf[info->xmit_head++] = ch;
@@ -1099,6 +1316,7 @@ static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
spin_unlock_irqrestore(&info->slock, flags);
}
}
+ return 1;
}
@@ -1142,26 +1360,6 @@ static int mxser_chars_in_buffer(struct tty_struct *tty)
return info->xmit_cnt;
}
-static void mxser_flush_buffer(struct tty_struct *tty)
-{
- struct mxser_port *info = tty->driver_data;
- char fcr;
- unsigned long flags;
-
-
- spin_lock_irqsave(&info->slock, flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- fcr = inb(info->ioaddr + UART_FCR);
- outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
- info->ioaddr + UART_FCR);
- outb(fcr, info->ioaddr + UART_FCR);
-
- spin_unlock_irqrestore(&info->slock, flags);
-
- tty_wakeup(tty);
-}
-
/*
* ------------------------------------------------------------
* friends of mxser_ioctl()
@@ -1460,6 +1658,7 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
struct mxser_port *port;
int result, status;
unsigned int i, j;
+ int ret = 0;
switch (cmd) {
case MOXA_GET_MAJOR:
@@ -1467,18 +1666,21 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
case MOXA_CHKPORTENABLE:
result = 0;
-
+ lock_kernel();
for (i = 0; i < MXSER_BOARDS; i++)
for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
if (mxser_boards[i].ports[j].ioaddr)
result |= (1 << i);
-
+ unlock_kernel();
return put_user(result, (unsigned long __user *)argp);
case MOXA_GETDATACOUNT:
+ lock_kernel();
if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ unlock_kernel();
+ return ret;
case MOXA_GETMSTATUS:
+ lock_kernel();
for (i = 0; i < MXSER_BOARDS; i++)
for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
port = &mxser_boards[i].ports[j];
@@ -1515,6 +1717,7 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
else
GMStatus[i].cts = 0;
}
+ unlock_kernel();
if (copy_to_user(argp, GMStatus,
sizeof(struct mxser_mstatus) * MXSER_PORTS))
return -EFAULT;
@@ -1524,7 +1727,8 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
unsigned long opmode;
unsigned cflag, iflag;
- for (i = 0; i < MXSER_BOARDS; i++)
+ lock_kernel();
+ for (i = 0; i < MXSER_BOARDS; i++) {
for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
port = &mxser_boards[i].ports[j];
if (!port->ioaddr)
@@ -1589,13 +1793,14 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
mon_data_ext.iftype[i] = opmode;
}
- if (copy_to_user(argp, &mon_data_ext,
- sizeof(mon_data_ext)))
- return -EFAULT;
-
- return 0;
-
- } default:
+ }
+ unlock_kernel();
+ if (copy_to_user(argp, &mon_data_ext,
+ sizeof(mon_data_ext)))
+ return -EFAULT;
+ return 0;
+ }
+ default:
return -ENOIOCTLCMD;
}
return 0;
@@ -1651,16 +1856,20 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
opmode != RS422_MODE &&
opmode != RS485_4WIRE_MODE)
return -EFAULT;
+ lock_kernel();
mask = ModeMask[p];
shiftbit = p * 2;
val = inb(info->opmode_ioaddr);
val &= mask;
val |= (opmode << shiftbit);
outb(val, info->opmode_ioaddr);
+ unlock_kernel();
} else {
+ lock_kernel();
shiftbit = p * 2;
opmode = inb(info->opmode_ioaddr) >> shiftbit;
opmode &= OP_MODE_MASK;
+ unlock_kernel();
if (put_user(opmode, (int __user *)argp))
return -EFAULT;
}
@@ -1687,19 +1896,18 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
tty_wait_until_sent(tty, 0);
mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
return 0;
- case TIOCGSOFTCAR:
- return put_user(!!C_CLOCAL(tty), (unsigned long __user *)argp);
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned long __user *)argp))
- return -EFAULT;
- tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
- return 0;
case TIOCGSERIAL:
- return mxser_get_serial_info(info, argp);
+ lock_kernel();
+ retval = mxser_get_serial_info(info, argp);
+ unlock_kernel();
+ return retval;
case TIOCSSERIAL:
- return mxser_set_serial_info(info, argp);
+ lock_kernel();
+ retval = mxser_set_serial_info(info, argp);
+ unlock_kernel();
+ return retval;
case TIOCSERGETLSR: /* Get line status register */
- return mxser_get_lsr_info(info, argp);
+ return mxser_get_lsr_info(info, argp);
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
@@ -1746,24 +1954,27 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
case MOXA_HighSpeedOn:
return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
case MOXA_SDS_RSTICOUNTER:
+ lock_kernel();
info->mon_data.rxcnt = 0;
info->mon_data.txcnt = 0;
+ unlock_kernel();
return 0;
case MOXA_ASPP_OQUEUE:{
int len, lsr;
+ lock_kernel();
len = mxser_chars_in_buffer(tty);
-
lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
-
len += (lsr ? 0 : 1);
+ unlock_kernel();
return put_user(len, (int __user *)argp);
}
case MOXA_ASPP_MON: {
int mcr, status;
+ lock_kernel();
status = mxser_get_msr(info->ioaddr, 1, tty->index);
mxser_check_modem_status(info, status);
@@ -1782,7 +1993,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
else
info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
-
+ unlock_kernel();
if (copy_to_user(argp, &info->mon_data,
sizeof(struct mxser_mon)))
return -EFAULT;
@@ -1925,7 +2136,8 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
if (info->board->chip_flag) {
spin_lock_irqsave(&info->slock, flags);
- DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ mxser_disable_must_rx_software_flow_control(
+ info->ioaddr);
spin_unlock_irqrestore(&info->slock, flags);
}
@@ -1979,6 +2191,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
timeout, char_time);
printk("jiff=%lu...", jiffies);
#endif
+ lock_kernel();
while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
@@ -1990,6 +2203,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
set_current_state(TASK_RUNNING);
+ unlock_kernel();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
@@ -2342,7 +2556,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
/* Enhance mode enabled here */
if (brd->chip_flag != MOXA_OTHER_UART)
- ENABLE_MOXA_MUST_ENCHANCE_MODE(info->ioaddr);
+ mxser_enable_must_enchance_mode(info->ioaddr);
info->flags = ASYNC_SHARE_IRQ;
info->type = brd->uart_type;
diff --git a/drivers/char/mxser.h b/drivers/char/mxser.h
index 84417111595..41878a69203 100644
--- a/drivers/char/mxser.h
+++ b/drivers/char/mxser.h
@@ -147,141 +147,4 @@
/* Rx software flow control mask */
#define MOXA_MUST_EFR_SF_RX_MASK 0x03
-#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr |= MOXA_MUST_EFR_EFRB_ENABLE; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
- __efr |= MOXA_MUST_EFR_BANK0; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb((u8)(Value), (baseio)+MOXA_MUST_XON1_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
- __efr |= MOXA_MUST_EFR_BANK0; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb((u8)(Value), (baseio)+MOXA_MUST_XOFF1_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define SET_MOXA_MUST_FIFO_VALUE(info) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((info)->ioaddr+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (info)->ioaddr+UART_LCR);\
- __efr = inb((info)->ioaddr+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
- __efr |= MOXA_MUST_EFR_BANK1; \
- outb(__efr, (info)->ioaddr+MOXA_MUST_EFR_REGISTER); \
- outb((u8)((info)->rx_high_water), (info)->ioaddr+ \
- MOXA_MUST_RBRTH_REGISTER); \
- outb((u8)((info)->rx_trigger), (info)->ioaddr+ \
- MOXA_MUST_RBRTI_REGISTER); \
- outb((u8)((info)->rx_low_water), (info)->ioaddr+ \
- MOXA_MUST_RBRTL_REGISTER); \
- outb(__oldlcr, (info)->ioaddr+UART_LCR); \
-} while (0)
-
-#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
- __efr |= MOXA_MUST_EFR_BANK2; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb((u8)(Value), (baseio)+MOXA_MUST_ENUM_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
- __efr |= MOXA_MUST_EFR_BANK2; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- *pId = inb((baseio)+MOXA_MUST_HWID_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_SF_MASK; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
- __efr |= MOXA_MUST_EFR_SF_TX1; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
- __efr |= MOXA_MUST_EFR_SF_RX1; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
-#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do { \
- u8 __oldlcr, __efr; \
- __oldlcr = inb((baseio)+UART_LCR); \
- outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
- __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
- __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
- outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
- outb(__oldlcr, (baseio)+UART_LCR); \
-} while (0)
-
#endif
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 06803ed5568..a35bfd7ee80 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -342,12 +342,10 @@ static int n_hdlc_tty_open (struct tty_struct *tty)
#endif
/* Flush any pending characters in the driver and discipline. */
-
if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer (tty);
+ tty->ldisc.flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer (tty);
+ tty_driver_flush_buffer(tty);
if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
@@ -399,7 +397,7 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
/* Send the next block of data to device */
tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
- actual = tty->driver->write(tty, tbuf->buf, tbuf->count);
+ actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
/* rollback was possible and has been done */
if (actual == -ERESTARTSYS) {
@@ -578,26 +576,36 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
return -EFAULT;
}
+ lock_kernel();
+
for (;;) {
- if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
+ unlock_kernel();
return -EIO;
+ }
n_hdlc = tty2n_hdlc (tty);
if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
- tty != n_hdlc->tty)
+ tty != n_hdlc->tty) {
+ unlock_kernel();
return 0;
+ }
rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
if (rbuf)
break;
/* no data */
- if (file->f_flags & O_NONBLOCK)
+ if (file->f_flags & O_NONBLOCK) {
+ unlock_kernel();
return -EAGAIN;
+ }
interruptible_sleep_on (&tty->read_wait);
- if (signal_pending(current))
+ if (signal_pending(current)) {
+ unlock_kernel();
return -EINTR;
+ }
}
if (rbuf->count > nr)
@@ -618,7 +626,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
kfree(rbuf);
else
n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf);
-
+ unlock_kernel();
return ret;
} /* end of n_hdlc_tty_read() */
@@ -661,6 +669,8 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
count = maxframe;
}
+ lock_kernel();
+
add_wait_queue(&tty->write_wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
@@ -695,7 +705,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
n_hdlc_send_frames(n_hdlc,tty);
}
-
+ unlock_kernel();
return error;
} /* end of n_hdlc_tty_write() */
@@ -740,8 +750,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
case TIOCOUTQ:
/* get the pending tx byte count in the driver */
- count = tty->driver->chars_in_buffer ?
- tty->driver->chars_in_buffer(tty) : 0;
+ count = tty_chars_in_buffer(tty);
/* add size of next output frame in queue */
spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
if (n_hdlc->tx_buf_list.head)
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 6b918b80f73..90216906233 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -376,8 +376,9 @@ static void put_char(struct r3964_info *pInfo, unsigned char ch)
if (tty == NULL)
return;
- if (tty->driver->put_char) {
- tty->driver->put_char(tty, ch);
+ /* FIXME: put_char should not be called from an IRQ */
+ if (tty->ops->put_char) {
+ tty->ops->put_char(tty, ch);
}
pInfo->bcc ^= ch;
}
@@ -386,12 +387,9 @@ static void flush(struct r3964_info *pInfo)
{
struct tty_struct *tty = pInfo->tty;
- if (tty == NULL)
+ if (tty == NULL || tty->ops->flush_chars == NULL)
return;
-
- if (tty->driver->flush_chars) {
- tty->driver->flush_chars(tty);
- }
+ tty->ops->flush_chars(tty);
}
static void trigger_transmit(struct r3964_info *pInfo)
@@ -449,12 +447,11 @@ static void transmit_block(struct r3964_info *pInfo)
struct r3964_block_header *pBlock = pInfo->tx_first;
int room = 0;
- if ((tty == NULL) || (pBlock == NULL)) {
+ if (tty == NULL || pBlock == NULL) {
return;
}
- if (tty->driver->write_room)
- room = tty->driver->write_room(tty);
+ room = tty_write_room(tty);
TRACE_PS("transmit_block %p, room %d, length %d",
pBlock, room, pBlock->length);
@@ -1075,12 +1072,15 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
TRACE_L("read()");
+ lock_kernel();
+
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
pMsg = remove_msg(pInfo, pClient);
if (pMsg == NULL) {
/* no messages available. */
if (file->f_flags & O_NONBLOCK) {
+ unlock_kernel();
return -EAGAIN;
}
/* block until there is a message: */
@@ -1090,8 +1090,10 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
/* If we still haven't got a message, we must have been signalled */
- if (!pMsg)
+ if (!pMsg) {
+ unlock_kernel();
return -EINTR;
+ }
/* deliver msg to client process: */
theMsg.msg_id = pMsg->msg_id;
@@ -1102,12 +1104,15 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
kfree(pMsg);
TRACE_M("r3964_read - msg kfree %p", pMsg);
- if (copy_to_user(buf, &theMsg, count))
+ if (copy_to_user(buf, &theMsg, count)) {
+ unlock_kernel();
return -EFAULT;
+ }
TRACE_PS("read - return %d", count);
return count;
}
+ unlock_kernel();
return -EPERM;
}
@@ -1156,6 +1161,8 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
pHeader->locks = 0;
pHeader->owner = NULL;
+ lock_kernel();
+
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
pHeader->owner = pClient;
@@ -1173,6 +1180,8 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
add_tx_queue(pInfo, pHeader);
trigger_transmit(pInfo);
+ unlock_kernel();
+
return 0;
}
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 0c09409fa45..19105ec203f 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -147,10 +147,8 @@ static void put_tty_queue(unsigned char c, struct tty_struct *tty)
static void check_unthrottle(struct tty_struct *tty)
{
- if (tty->count &&
- test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
- tty->driver->unthrottle)
- tty->driver->unthrottle(tty);
+ if (tty->count)
+ tty_unthrottle(tty);
}
/**
@@ -183,22 +181,24 @@ static void reset_buffer_flags(struct tty_struct *tty)
* at hangup) or when the N_TTY line discipline internally has to
* clean the pending queue (for example some signals).
*
- * FIXME: tty->ctrl_status is not spinlocked and relies on
- * lock_kernel() still.
+ * Locking: ctrl_lock
*/
static void n_tty_flush_buffer(struct tty_struct *tty)
{
+ unsigned long flags;
/* clear everything and unthrottle the driver */
reset_buffer_flags(tty);
if (!tty->link)
return;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
if (tty->link->packet) {
tty->ctrl_status |= TIOCPKT_FLUSHREAD;
wake_up_interruptible(&tty->link->read_wait);
}
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
}
/**
@@ -264,17 +264,18 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty)
* relevant in the world today. If you ever need them, add them here.
*
* Called from both the receive and transmit sides and can be called
- * re-entrantly. Relies on lock_kernel() still.
+ * re-entrantly. Relies on lock_kernel() for tty->column state.
*/
static int opost(unsigned char c, struct tty_struct *tty)
{
int space, spaces;
- space = tty->driver->write_room(tty);
+ space = tty_write_room(tty);
if (!space)
return -1;
+ lock_kernel();
if (O_OPOST(tty)) {
switch (c) {
case '\n':
@@ -283,7 +284,7 @@ static int opost(unsigned char c, struct tty_struct *tty)
if (O_ONLCR(tty)) {
if (space < 2)
return -1;
- tty->driver->put_char(tty, '\r');
+ tty_put_char(tty, '\r');
tty->column = 0;
}
tty->canon_column = tty->column;
@@ -305,7 +306,7 @@ static int opost(unsigned char c, struct tty_struct *tty)
if (space < spaces)
return -1;
tty->column += spaces;
- tty->driver->write(tty, " ", spaces);
+ tty->ops->write(tty, " ", spaces);
return 0;
}
tty->column += spaces;
@@ -322,7 +323,8 @@ static int opost(unsigned char c, struct tty_struct *tty)
break;
}
}
- tty->driver->put_char(tty, c);
+ tty_put_char(tty, c);
+ unlock_kernel();
return 0;
}
@@ -337,7 +339,8 @@ static int opost(unsigned char c, struct tty_struct *tty)
* the simple cases normally found and helps to generate blocks of
* symbols for the console driver and thus improve performance.
*
- * Called from write_chan under the tty layer write lock.
+ * Called from write_chan under the tty layer write lock. Relies
+ * on lock_kernel for the tty->column state.
*/
static ssize_t opost_block(struct tty_struct *tty,
@@ -347,12 +350,13 @@ static ssize_t opost_block(struct tty_struct *tty,
int i;
const unsigned char *cp;
- space = tty->driver->write_room(tty);
+ space = tty_write_room(tty);
if (!space)
return 0;
if (nr > space)
nr = space;
+ lock_kernel();
for (i = 0, cp = buf; i < nr; i++, cp++) {
switch (*cp) {
case '\n':
@@ -384,27 +388,15 @@ static ssize_t opost_block(struct tty_struct *tty,
}
}
break_out:
- if (tty->driver->flush_chars)
- tty->driver->flush_chars(tty);
- i = tty->driver->write(tty, buf, i);
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
+ i = tty->ops->write(tty, buf, i);
+ unlock_kernel();
return i;
}
/**
- * put_char - write character to driver
- * @c: character (or part of unicode symbol)
- * @tty: terminal device
- *
- * Queue a byte to the driver layer for output
- */
-
-static inline void put_char(unsigned char c, struct tty_struct *tty)
-{
- tty->driver->put_char(tty, c);
-}
-
-/**
* echo_char - echo characters
* @c: unicode byte to echo
* @tty: terminal device
@@ -416,8 +408,8 @@ static inline void put_char(unsigned char c, struct tty_struct *tty)
static void echo_char(unsigned char c, struct tty_struct *tty)
{
if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') {
- put_char('^', tty);
- put_char(c ^ 0100, tty);
+ tty_put_char(tty, '^');
+ tty_put_char(tty, c ^ 0100);
tty->column += 2;
} else
opost(c, tty);
@@ -426,7 +418,7 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
static inline void finish_erasing(struct tty_struct *tty)
{
if (tty->erasing) {
- put_char('/', tty);
+ tty_put_char(tty, '/');
tty->column++;
tty->erasing = 0;
}
@@ -510,7 +502,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
if (!tty->erasing) {
- put_char('\\', tty);
+ tty_put_char(tty, '\\');
tty->column++;
tty->erasing = 1;
}
@@ -518,7 +510,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
echo_char(c, tty);
while (--cnt > 0) {
head = (head+1) & (N_TTY_BUF_SIZE-1);
- put_char(tty->read_buf[head], tty);
+ tty_put_char(tty, tty->read_buf[head]);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
echo_char(ERASE_CHAR(tty), tty);
@@ -546,22 +538,22 @@ static void eraser(unsigned char c, struct tty_struct *tty)
/* Now backup to that column. */
while (tty->column > col) {
/* Can't use opost here. */
- put_char('\b', tty);
+ tty_put_char(tty, '\b');
if (tty->column > 0)
tty->column--;
}
} else {
if (iscntrl(c) && L_ECHOCTL(tty)) {
- put_char('\b', tty);
- put_char(' ', tty);
- put_char('\b', tty);
+ tty_put_char(tty, '\b');
+ tty_put_char(tty, ' ');
+ tty_put_char(tty, '\b');
if (tty->column > 0)
tty->column--;
}
if (!iscntrl(c) || L_ECHOCTL(tty)) {
- put_char('\b', tty);
- put_char(' ', tty);
- put_char('\b', tty);
+ tty_put_char(tty, '\b');
+ tty_put_char(tty, ' ');
+ tty_put_char(tty, '\b');
if (tty->column > 0)
tty->column--;
}
@@ -592,8 +584,7 @@ static inline void isig(int sig, struct tty_struct *tty, int flush)
kill_pgrp(tty->pgrp, sig, 1);
if (flush || !L_NOFLSH(tty)) {
n_tty_flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
}
}
@@ -701,7 +692,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
((I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty)) ||
- c == INTR_CHAR(tty) || c == QUIT_CHAR(tty)))
+ c == INTR_CHAR(tty) || c == QUIT_CHAR(tty) || c == SUSP_CHAR(tty)))
start_tty(tty);
if (tty->closing) {
@@ -725,7 +716,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
tty->lnext = 0;
if (L_ECHO(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1) {
- put_char('\a', tty); /* beep if no space */
+ tty_put_char(tty, '\a'); /* beep if no space */
return;
}
/* Record the column of first canon char. */
@@ -739,13 +730,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
return;
}
- if (c == '\r') {
- if (I_IGNCR(tty))
- return;
- if (I_ICRNL(tty))
- c = '\n';
- } else if (c == '\n' && I_INLCR(tty))
- c = '\r';
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
@@ -756,6 +740,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
return;
}
}
+
if (L_ISIG(tty)) {
int signal;
signal = SIGINT;
@@ -775,8 +760,7 @@ send_signal:
*/
if (!L_NOFLSH(tty)) {
n_tty_flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
}
if (L_ECHO(tty))
echo_char(c, tty);
@@ -785,6 +769,15 @@ send_signal:
return;
}
}
+
+ if (c == '\r') {
+ if (I_IGNCR(tty))
+ return;
+ if (I_ICRNL(tty))
+ c = '\n';
+ } else if (c == '\n' && I_INLCR(tty))
+ c = '\r';
+
if (tty->icanon) {
if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
@@ -796,8 +789,8 @@ send_signal:
if (L_ECHO(tty)) {
finish_erasing(tty);
if (L_ECHOCTL(tty)) {
- put_char('^', tty);
- put_char('\b', tty);
+ tty_put_char(tty, '^');
+ tty_put_char(tty, '\b');
}
}
return;
@@ -818,7 +811,7 @@ send_signal:
if (c == '\n') {
if (L_ECHO(tty) || L_ECHONL(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1)
- put_char('\a', tty);
+ tty_put_char(tty, '\a');
opost('\n', tty);
}
goto handle_newline;
@@ -836,7 +829,7 @@ send_signal:
*/
if (L_ECHO(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1)
- put_char('\a', tty);
+ tty_put_char(tty, '\a');
/* Record the column of first canon char. */
if (tty->canon_head == tty->read_head)
tty->canon_column = tty->column;
@@ -866,7 +859,7 @@ handle_newline:
finish_erasing(tty);
if (L_ECHO(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1) {
- put_char('\a', tty); /* beep if no space */
+ tty_put_char(tty, '\a'); /* beep if no space */
return;
}
if (c == '\n')
@@ -970,8 +963,8 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
break;
}
}
- if (tty->driver->flush_chars)
- tty->driver->flush_chars(tty);
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
}
n_tty_set_room(tty);
@@ -987,12 +980,8 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
* mode. We don't want to throttle the driver if we're in
* canonical mode and don't have a newline yet!
*/
- if (tty->receive_room < TTY_THRESHOLD_THROTTLE) {
- /* check TTY_THROTTLED first so it indicates our state */
- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
- tty->driver->throttle)
- tty->driver->throttle(tty);
- }
+ if (tty->receive_room < TTY_THRESHOLD_THROTTLE)
+ tty_throttle(tty);
}
int is_ignored(int sig)
@@ -1076,6 +1065,9 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
tty->real_raw = 0;
}
n_tty_set_room(tty);
+ /* The termios change make the tty ready for I/O */
+ wake_up_interruptible(&tty->write_wait);
+ wake_up_interruptible(&tty->read_wait);
}
/**
@@ -1194,6 +1186,11 @@ extern ssize_t redirected_tty_write(struct file *, const char __user *,
* Perform job control management checks on this file/tty descriptor
* and if appropriate send any needed signals and return a negative
* error code if action should be taken.
+ *
+ * FIXME:
+ * Locking: None - redirected write test is safe, testing
+ * current->signal should possibly lock current->sighand
+ * pgrp locking ?
*/
static int job_control(struct tty_struct *tty, struct file *file)
@@ -1246,6 +1243,7 @@ static ssize_t read_chan(struct tty_struct *tty, struct file *file,
ssize_t size;
long timeout;
unsigned long flags;
+ int packet;
do_it_again:
@@ -1289,16 +1287,19 @@ do_it_again:
if (mutex_lock_interruptible(&tty->atomic_read_lock))
return -ERESTARTSYS;
}
+ packet = tty->packet;
add_wait_queue(&tty->read_wait, &wait);
while (nr) {
/* First test for status change. */
- if (tty->packet && tty->link->ctrl_status) {
+ if (packet && tty->link->ctrl_status) {
unsigned char cs;
if (b != buf)
break;
+ spin_lock_irqsave(&tty->link->ctrl_lock, flags);
cs = tty->link->ctrl_status;
tty->link->ctrl_status = 0;
+ spin_unlock_irqrestore(&tty->link->ctrl_lock, flags);
if (tty_put_user(tty, cs, b++)) {
retval = -EFAULT;
b--;
@@ -1333,6 +1334,7 @@ do_it_again:
retval = -ERESTARTSYS;
break;
}
+ /* FIXME: does n_tty_set_room need locking ? */
n_tty_set_room(tty);
timeout = schedule_timeout(timeout);
continue;
@@ -1340,7 +1342,7 @@ do_it_again:
__set_current_state(TASK_RUNNING);
/* Deal with packet mode. */
- if (tty->packet && b == buf) {
+ if (packet && b == buf) {
if (tty_put_user(tty, TIOCPKT_DATA, b++)) {
retval = -EFAULT;
b--;
@@ -1388,6 +1390,8 @@ do_it_again:
break;
} else {
int uncopied;
+ /* The copy function takes the read lock and handles
+ locking internally for this case */
uncopied = copy_from_read_buf(tty, &b, &nr);
uncopied += copy_from_read_buf(tty, &b, &nr);
if (uncopied) {
@@ -1429,7 +1433,6 @@ do_it_again:
goto do_it_again;
n_tty_set_room(tty);
-
return retval;
}
@@ -1492,11 +1495,11 @@ static ssize_t write_chan(struct tty_struct *tty, struct file *file,
break;
b++; nr--;
}
- if (tty->driver->flush_chars)
- tty->driver->flush_chars(tty);
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
} else {
while (nr > 0) {
- c = tty->driver->write(tty, b, nr);
+ c = tty->ops->write(tty, b, nr);
if (c < 0) {
retval = c;
goto break_out;
@@ -1533,11 +1536,6 @@ break_out:
*
* This code must be sure never to sleep through a hangup.
* Called without the kernel lock held - fine
- *
- * FIXME: if someone changes the VMIN or discipline settings for the
- * terminal while another process is in poll() the poll does not
- * recompute the new limits. Possibly set_termios should issue
- * a read wakeup to fix this bug.
*/
static unsigned int normal_poll(struct tty_struct *tty, struct file *file,
@@ -1561,9 +1559,9 @@ static unsigned int normal_poll(struct tty_struct *tty, struct file *file,
else
tty->minimum_to_wake = 1;
}
- if (!tty_is_writelocked(tty) &&
- tty->driver->chars_in_buffer(tty) < WAKEUP_CHARS &&
- tty->driver->write_room(tty) > 0)
+ if (tty->ops->write && !tty_is_writelocked(tty) &&
+ tty_chars_in_buffer(tty) < WAKEUP_CHARS &&
+ tty_write_room(tty) > 0)
mask |= POLLOUT | POLLWRNORM;
return mask;
}
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 6a6843a0a67..66a0f931c66 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -73,7 +73,7 @@ do { \
char tmp[P_BUF_SIZE]; \
snprintf(tmp, sizeof(tmp), ##args); \
printk(_err_flag_ "[%d] %s(): %s\n", __LINE__, \
- __FUNCTION__, tmp); \
+ __func__, tmp); \
} while (0)
#define DBG1(args...) D_(0x01, ##args)
@@ -1407,7 +1407,7 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
/* Find out what card type it is */
nozomi_get_card_type(dc);
- dc->base_addr = ioremap(start, dc->card_type);
+ dc->base_addr = ioremap_nocache(start, dc->card_type);
if (!dc->base_addr) {
dev_err(&pdev->dev, "Unable to map card MMIO\n");
ret = -ENODEV;
@@ -1724,6 +1724,8 @@ static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
const struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
+ /* Note: these could change under us but it is not clear this
+ matters if so */
return (ctrl_ul->RTS ? TIOCM_RTS : 0) |
(ctrl_ul->DTR ? TIOCM_DTR : 0) |
(ctrl_dl->DCD ? TIOCM_CAR : 0) |
@@ -1849,16 +1851,6 @@ static void ntty_throttle(struct tty_struct *tty)
spin_unlock_irqrestore(&dc->spin_mutex, flags);
}
-/* just to discard single character writes */
-static void ntty_put_char(struct tty_struct *tty, unsigned char c)
-{
- /*
- * card does not react correct when we write single chars
- * to the card, so we discard them
- */
- DBG2("PUT CHAR Function: %c", c);
-}
-
/* Returns number of chars in buffer, called by tty layer */
static s32 ntty_chars_in_buffer(struct tty_struct *tty)
{
@@ -1892,7 +1884,6 @@ static const struct tty_operations tty_ops = {
.unthrottle = ntty_unthrottle,
.throttle = ntty_throttle,
.chars_in_buffer = ntty_chars_in_buffer,
- .put_char = ntty_put_char,
.tiocmget = ntty_tiocmget,
.tiocmset = ntty_tiocmset,
};
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 454d7324ba4..4a933d41342 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -53,7 +53,7 @@ module_param(pc_debug, int, 0600);
#define DEBUGP(n, rdr, x, args...) do { \
if (pc_debug >= (n)) \
dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, \
- __FUNCTION__ , ## args); \
+ __func__ , ## args); \
} while (0)
#else
#define DEBUGP(n, rdr, x, args...)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 5f291bf739a..035084c0732 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -47,7 +47,7 @@ module_param(pc_debug, int, 0600);
#define DEBUGP(n, rdr, x, args...) do { \
if (pc_debug >= (n)) \
dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, \
- __FUNCTION__ , ##args); \
+ __func__ , ##args); \
} while (0)
#else
#define DEBUGP(n, rdr, x, args...)
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index 1f978ff87fa..fa9d3c945f3 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -354,32 +354,6 @@ struct ipw_rx_packet {
unsigned int channel_idx;
};
-#ifdef IPWIRELESS_STATE_DEBUG
-int ipwireless_dump_hardware_state(char *p, size_t limit,
- struct ipw_hardware *hw)
-{
- return snprintf(p, limit,
- "debug: initializing=%d\n"
- "debug: tx_ready=%d\n"
- "debug: tx_queued=%d\n"
- "debug: rx_ready=%d\n"
- "debug: rx_bytes_queued=%d\n"
- "debug: blocking_rx=%d\n"
- "debug: removed=%d\n"
- "debug: hardware.shutting_down=%d\n"
- "debug: to_setup=%d\n",
- hw->initializing,
- hw->tx_ready,
- hw->tx_queued,
- hw->rx_ready,
- hw->rx_bytes_queued,
- hw->blocking_rx,
- hw->removed,
- hw->shutting_down,
- hw->to_setup);
-}
-#endif
-
static char *data_type(const unsigned char *buf, unsigned length)
{
struct nl_packet_header *hdr = (struct nl_packet_header *) buf;
diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/char/pcmcia/ipwireless/hardware.h
index c83190ffb0e..19ce5eb266b 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.h
+++ b/drivers/char/pcmcia/ipwireless/hardware.h
@@ -58,7 +58,5 @@ void ipwireless_init_hardware_v1(struct ipw_hardware *hw,
void *reboot_cb_data);
void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw);
void ipwireless_sleep(unsigned int tenths);
-int ipwireless_dump_hardware_state(char *p, size_t limit,
- struct ipw_hardware *hw);
#endif
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c
index d793e68b3e0..fe914d34f7f 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/char/pcmcia/ipwireless/network.c
@@ -63,21 +63,6 @@ struct ipw_network {
struct work_struct work_go_offline;
};
-
-#ifdef IPWIRELESS_STATE_DEBUG
-int ipwireless_dump_network_state(char *p, size_t limit,
- struct ipw_network *network)
-{
- return snprintf(p, limit,
- "debug: ppp_blocked=%d\n"
- "debug: outgoing_packets_queued=%d\n"
- "debug: network.shutting_down=%d\n",
- network->ppp_blocked,
- network->outgoing_packets_queued,
- network->shutting_down);
-}
-#endif
-
static void notify_packet_sent(void *callback_data, unsigned int packet_length)
{
struct ipw_network *network = callback_data;
diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/char/pcmcia/ipwireless/network.h
index b0e1e952fd1..ccacd26fc7e 100644
--- a/drivers/char/pcmcia/ipwireless/network.h
+++ b/drivers/char/pcmcia/ipwireless/network.h
@@ -49,7 +49,4 @@ void ipwireless_ppp_close(struct ipw_network *net);
int ipwireless_ppp_channel_index(struct ipw_network *net);
int ipwireless_ppp_unit_number(struct ipw_network *net);
-int ipwireless_dump_network_state(char *p, size_t limit,
- struct ipw_network *net);
-
#endif
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 583356426df..1dd0e992c83 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -503,20 +503,9 @@ static void* mgslpc_get_text_ptr(void)
* The wrappers maintain line discipline references
* while calling into the line discipline.
*
- * ldisc_flush_buffer - flush line discipline receive buffers
* ldisc_receive_buf - pass receive data to line discipline
*/
-static void ldisc_flush_buffer(struct tty_struct *tty)
-{
- struct tty_ldisc *ld = tty_ldisc_ref(tty);
- if (ld) {
- if (ld->flush_buffer)
- ld->flush_buffer(tty);
- tty_ldisc_deref(ld);
- }
-}
-
static void ldisc_receive_buf(struct tty_struct *tty,
const __u8 *data, char *flags, int count)
{
@@ -1556,7 +1545,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info)
/* Add a character to the transmit buffer
*/
-static void mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
+static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
@@ -1567,10 +1556,10 @@ static void mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
}
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
- return;
+ return 0;
if (!info->tx_buf)
- return;
+ return 0;
spin_lock_irqsave(&info->lock,flags);
@@ -1583,6 +1572,7 @@ static void mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
}
spin_unlock_irqrestore(&info->lock,flags);
+ return 1;
}
/* Enable transmitter so remaining characters in the
@@ -2467,10 +2457,9 @@ static void mgslpc_close(struct tty_struct *tty, struct file * filp)
if (info->flags & ASYNC_INITIALIZED)
mgslpc_wait_until_sent(tty, info->timeout);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ mgslpc_flush_buffer(tty);
- ldisc_flush_buffer(tty);
+ tty_ldisc_flush(tty);
shutdown(info);
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 706ff34728f..0a05c038ae6 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -181,6 +181,7 @@ static int pty_set_lock(struct tty_struct *tty, int __user * arg)
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
+ unsigned long flags;
if (!to)
return;
@@ -189,8 +190,10 @@ static void pty_flush_buffer(struct tty_struct *tty)
to->ldisc.flush_buffer(to);
if (to->packet) {
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
wake_up_interruptible(&to->read_wait);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
}
}
@@ -251,6 +254,18 @@ static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
module_param(legacy_count, int, 0);
+static const struct tty_operations pty_ops_bsd = {
+ .open = pty_open,
+ .close = pty_close,
+ .write = pty_write,
+ .write_room = pty_write_room,
+ .flush_buffer = pty_flush_buffer,
+ .chars_in_buffer = pty_chars_in_buffer,
+ .unthrottle = pty_unthrottle,
+ .set_termios = pty_set_termios,
+ .ioctl = pty_bsd_ioctl,
+};
+
static void __init legacy_pty_init(void)
{
if (legacy_count <= 0)
@@ -281,7 +296,6 @@ static void __init legacy_pty_init(void)
pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
pty_driver->other = pty_slave_driver;
tty_set_operations(pty_driver, &pty_ops);
- pty_driver->ioctl = pty_bsd_ioctl;
pty_slave_driver->owner = THIS_MODULE;
pty_slave_driver->driver_name = "pty_slave";
@@ -374,6 +388,19 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
return -ENOIOCTLCMD;
}
+static const struct tty_operations pty_unix98_ops = {
+ .open = pty_open,
+ .close = pty_close,
+ .write = pty_write,
+ .write_room = pty_write_room,
+ .flush_buffer = pty_flush_buffer,
+ .chars_in_buffer = pty_chars_in_buffer,
+ .unthrottle = pty_unthrottle,
+ .set_termios = pty_set_termios,
+ .ioctl = pty_unix98_ioctl
+};
+
+
static void __init unix98_pty_init(void)
{
ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
@@ -400,8 +427,7 @@ static void __init unix98_pty_init(void)
ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
- tty_set_operations(ptm_driver, &pty_ops);
- ptm_driver->ioctl = pty_unix98_ioctl;
+ tty_set_operations(ptm_driver, &pty_unix98_ops);
pts_driver->owner = THIS_MODULE;
pts_driver->driver_name = "pty_slave";
diff --git a/drivers/char/random.c b/drivers/char/random.c
index f43c89f7c44..0cf98bd4f2d 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -272,7 +272,7 @@ static int random_write_wakeup_thresh = 128;
static int trickle_thresh __read_mostly = INPUT_POOL_WORDS * 28;
-static DEFINE_PER_CPU(int, trickle_count) = 0;
+static DEFINE_PER_CPU(int, trickle_count);
/*
* A pool of size .poolwords is stirred with a primitive polynomial
@@ -370,17 +370,19 @@ static struct poolinfo {
*/
static DECLARE_WAIT_QUEUE_HEAD(random_read_wait);
static DECLARE_WAIT_QUEUE_HEAD(random_write_wait);
+static struct fasync_struct *fasync;
#if 0
-static int debug = 0;
+static int debug;
module_param(debug, bool, 0644);
-#define DEBUG_ENT(fmt, arg...) do { if (debug) \
- printk(KERN_DEBUG "random %04d %04d %04d: " \
- fmt,\
- input_pool.entropy_count,\
- blocking_pool.entropy_count,\
- nonblocking_pool.entropy_count,\
- ## arg); } while (0)
+#define DEBUG_ENT(fmt, arg...) do { \
+ if (debug) \
+ printk(KERN_DEBUG "random %04d %04d %04d: " \
+ fmt,\
+ input_pool.entropy_count,\
+ blocking_pool.entropy_count,\
+ nonblocking_pool.entropy_count,\
+ ## arg); } while (0)
#else
#define DEBUG_ENT(fmt, arg...) do {} while (0)
#endif
@@ -394,7 +396,7 @@ module_param(debug, bool, 0644);
struct entropy_store;
struct entropy_store {
- /* mostly-read data: */
+ /* read-only data: */
struct poolinfo *poolinfo;
__u32 *pool;
const char *name;
@@ -402,7 +404,7 @@ struct entropy_store {
struct entropy_store *pull;
/* read-write data: */
- spinlock_t lock ____cacheline_aligned_in_smp;
+ spinlock_t lock;
unsigned add_ptr;
int entropy_count;
int input_rotate;
@@ -438,25 +440,26 @@ static struct entropy_store nonblocking_pool = {
};
/*
- * This function adds a byte into the entropy "pool". It does not
+ * This function adds bytes into the entropy "pool". It does not
* update the entropy estimate. The caller should call
- * credit_entropy_store if this is appropriate.
+ * credit_entropy_bits if this is appropriate.
*
* The pool is stirred with a primitive polynomial of the appropriate
* degree, and then twisted. We twist by three bits at a time because
* it's cheap to do so and helps slightly in the expected case where
* the entropy is concentrated in the low-order bits.
*/
-static void __add_entropy_words(struct entropy_store *r, const __u32 *in,
- int nwords, __u32 out[16])
+static void mix_pool_bytes_extract(struct entropy_store *r, const void *in,
+ int nbytes, __u8 out[64])
{
static __u32 const twist_table[8] = {
0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 };
- unsigned long i, add_ptr, tap1, tap2, tap3, tap4, tap5;
- int new_rotate, input_rotate;
+ unsigned long i, j, tap1, tap2, tap3, tap4, tap5;
+ int input_rotate;
int wordmask = r->poolinfo->poolwords - 1;
- __u32 w, next_w;
+ const char *bytes = in;
+ __u32 w;
unsigned long flags;
/* Taps are constant, so we can load them without holding r->lock. */
@@ -465,78 +468,76 @@ static void __add_entropy_words(struct entropy_store *r, const __u32 *in,
tap3 = r->poolinfo->tap3;
tap4 = r->poolinfo->tap4;
tap5 = r->poolinfo->tap5;
- next_w = *in++;
spin_lock_irqsave(&r->lock, flags);
- prefetch_range(r->pool, wordmask);
input_rotate = r->input_rotate;
- add_ptr = r->add_ptr;
+ i = r->add_ptr;
- while (nwords--) {
- w = rol32(next_w, input_rotate);
- if (nwords > 0)
- next_w = *in++;
- i = add_ptr = (add_ptr - 1) & wordmask;
- /*
- * Normally, we add 7 bits of rotation to the pool.
- * At the beginning of the pool, add an extra 7 bits
- * rotation, so that successive passes spread the
- * input bits across the pool evenly.
- */
- new_rotate = input_rotate + 14;
- if (i)
- new_rotate = input_rotate + 7;
- input_rotate = new_rotate & 31;
+ /* mix one byte at a time to simplify size handling and churn faster */
+ while (nbytes--) {
+ w = rol32(*bytes++, input_rotate & 31);
+ i = (i - 1) & wordmask;
/* XOR in the various taps */
+ w ^= r->pool[i];
w ^= r->pool[(i + tap1) & wordmask];
w ^= r->pool[(i + tap2) & wordmask];
w ^= r->pool[(i + tap3) & wordmask];
w ^= r->pool[(i + tap4) & wordmask];
w ^= r->pool[(i + tap5) & wordmask];
- w ^= r->pool[i];
+
+ /* Mix the result back in with a twist */
r->pool[i] = (w >> 3) ^ twist_table[w & 7];
+
+ /*
+ * Normally, we add 7 bits of rotation to the pool.
+ * At the beginning of the pool, add an extra 7 bits
+ * rotation, so that successive passes spread the
+ * input bits across the pool evenly.
+ */
+ input_rotate += i ? 7 : 14;
}
r->input_rotate = input_rotate;
- r->add_ptr = add_ptr;
+ r->add_ptr = i;
- if (out) {
- for (i = 0; i < 16; i++) {
- out[i] = r->pool[add_ptr];
- add_ptr = (add_ptr - 1) & wordmask;
- }
- }
+ if (out)
+ for (j = 0; j < 16; j++)
+ ((__u32 *)out)[j] = r->pool[(i - j) & wordmask];
spin_unlock_irqrestore(&r->lock, flags);
}
-static inline void add_entropy_words(struct entropy_store *r, const __u32 *in,
- int nwords)
+static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes)
{
- __add_entropy_words(r, in, nwords, NULL);
+ mix_pool_bytes_extract(r, in, bytes, NULL);
}
/*
* Credit (or debit) the entropy store with n bits of entropy
*/
-static void credit_entropy_store(struct entropy_store *r, int nbits)
+static void credit_entropy_bits(struct entropy_store *r, int nbits)
{
unsigned long flags;
+ if (!nbits)
+ return;
+
spin_lock_irqsave(&r->lock, flags);
- if (r->entropy_count + nbits < 0) {
- DEBUG_ENT("negative entropy/overflow (%d+%d)\n",
- r->entropy_count, nbits);
+ DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name);
+ r->entropy_count += nbits;
+ if (r->entropy_count < 0) {
+ DEBUG_ENT("negative entropy/overflow\n");
r->entropy_count = 0;
- } else if (r->entropy_count + nbits > r->poolinfo->POOLBITS) {
+ } else if (r->entropy_count > r->poolinfo->POOLBITS)
r->entropy_count = r->poolinfo->POOLBITS;
- } else {
- r->entropy_count += nbits;
- if (nbits)
- DEBUG_ENT("added %d entropy credits to %s\n",
- nbits, r->name);
+
+ /* should we wake readers? */
+ if (r == &input_pool &&
+ r->entropy_count >= random_read_wakeup_thresh) {
+ wake_up_interruptible(&random_read_wait);
+ kill_fasync(&fasync, SIGIO, POLL_IN);
}
spin_unlock_irqrestore(&r->lock, flags);
@@ -551,7 +552,7 @@ static void credit_entropy_store(struct entropy_store *r, int nbits)
/* There is one of these per entropy source */
struct timer_rand_state {
cycles_t last_time;
- long last_delta,last_delta2;
+ long last_delta, last_delta2;
unsigned dont_count_entropy:1;
};
@@ -586,7 +587,7 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num)
sample.jiffies = jiffies;
sample.cycles = get_cycles();
sample.num = num;
- add_entropy_words(&input_pool, (u32 *)&sample, sizeof(sample)/4);
+ mix_pool_bytes(&input_pool, &sample, sizeof(sample));
/*
* Calculate number of bits of randomness we probably added.
@@ -620,13 +621,9 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num)
* Round down by 1 bit on general principles,
* and limit entropy entimate to 12 bits.
*/
- credit_entropy_store(&input_pool,
- min_t(int, fls(delta>>1), 11));
+ credit_entropy_bits(&input_pool,
+ min_t(int, fls(delta>>1), 11));
}
-
- if(input_pool.entropy_count >= random_read_wakeup_thresh)
- wake_up_interruptible(&random_read_wait);
-
out:
preempt_enable();
}
@@ -677,7 +674,7 @@ void add_disk_randomness(struct gendisk *disk)
*
*********************************************************************/
-static ssize_t extract_entropy(struct entropy_store *r, void * buf,
+static ssize_t extract_entropy(struct entropy_store *r, void *buf,
size_t nbytes, int min, int rsvd);
/*
@@ -704,10 +701,10 @@ static void xfer_secondary_pool(struct entropy_store *r, size_t nbytes)
"(%d of %d requested)\n",
r->name, bytes * 8, nbytes * 8, r->entropy_count);
- bytes=extract_entropy(r->pull, tmp, bytes,
- random_read_wakeup_thresh / 8, rsvd);
- add_entropy_words(r, tmp, (bytes + 3) / 4);
- credit_entropy_store(r, bytes*8);
+ bytes = extract_entropy(r->pull, tmp, bytes,
+ random_read_wakeup_thresh / 8, rsvd);
+ mix_pool_bytes(r, tmp, bytes);
+ credit_entropy_bits(r, bytes*8);
}
}
@@ -744,13 +741,15 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min,
if (r->limit && nbytes + reserved >= r->entropy_count / 8)
nbytes = r->entropy_count/8 - reserved;
- if(r->entropy_count / 8 >= nbytes + reserved)
+ if (r->entropy_count / 8 >= nbytes + reserved)
r->entropy_count -= nbytes*8;
else
r->entropy_count = reserved;
- if (r->entropy_count < random_write_wakeup_thresh)
+ if (r->entropy_count < random_write_wakeup_thresh) {
wake_up_interruptible(&random_write_wait);
+ kill_fasync(&fasync, SIGIO, POLL_OUT);
+ }
}
DEBUG_ENT("debiting %d entropy credits from %s%s\n",
@@ -764,45 +763,46 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min,
static void extract_buf(struct entropy_store *r, __u8 *out)
{
int i;
- __u32 data[16], buf[5 + SHA_WORKSPACE_WORDS];
+ __u32 hash[5], workspace[SHA_WORKSPACE_WORDS];
+ __u8 extract[64];
+
+ /* Generate a hash across the pool, 16 words (512 bits) at a time */
+ sha_init(hash);
+ for (i = 0; i < r->poolinfo->poolwords; i += 16)
+ sha_transform(hash, (__u8 *)(r->pool + i), workspace);
- sha_init(buf);
/*
- * As we hash the pool, we mix intermediate values of
- * the hash back into the pool. This eliminates
- * backtracking attacks (where the attacker knows
- * the state of the pool plus the current outputs, and
- * attempts to find previous ouputs), unless the hash
- * function can be inverted.
+ * We mix the hash back into the pool to prevent backtracking
+ * attacks (where the attacker knows the state of the pool
+ * plus the current outputs, and attempts to find previous
+ * ouputs), unless the hash function can be inverted. By
+ * mixing at least a SHA1 worth of hash data back, we make
+ * brute-forcing the feedback as hard as brute-forcing the
+ * hash.
*/
- for (i = 0; i < r->poolinfo->poolwords; i += 16) {
- /* hash blocks of 16 words = 512 bits */
- sha_transform(buf, (__u8 *)(r->pool + i), buf + 5);
- /* feed back portion of the resulting hash */
- add_entropy_words(r, &buf[i % 5], 1);
- }
+ mix_pool_bytes_extract(r, hash, sizeof(hash), extract);
/*
- * To avoid duplicates, we atomically extract a
- * portion of the pool while mixing, and hash one
- * final time.
+ * To avoid duplicates, we atomically extract a portion of the
+ * pool while mixing, and hash one final time.
*/
- __add_entropy_words(r, &buf[i % 5], 1, data);
- sha_transform(buf, (__u8 *)data, buf + 5);
+ sha_transform(hash, extract, workspace);
+ memset(extract, 0, sizeof(extract));
+ memset(workspace, 0, sizeof(workspace));
/*
- * In case the hash function has some recognizable
- * output pattern, we fold it in half.
+ * In case the hash function has some recognizable output
+ * pattern, we fold it in half. Thus, we always feed back
+ * twice as much data as we output.
*/
-
- buf[0] ^= buf[3];
- buf[1] ^= buf[4];
- buf[2] ^= rol32(buf[2], 16);
- memcpy(out, buf, EXTRACT_SIZE);
- memset(buf, 0, sizeof(buf));
+ hash[0] ^= hash[3];
+ hash[1] ^= hash[4];
+ hash[2] ^= rol32(hash[2], 16);
+ memcpy(out, hash, EXTRACT_SIZE);
+ memset(hash, 0, sizeof(hash));
}
-static ssize_t extract_entropy(struct entropy_store *r, void * buf,
+static ssize_t extract_entropy(struct entropy_store *r, void *buf,
size_t nbytes, int min, int reserved)
{
ssize_t ret = 0, i;
@@ -872,7 +872,6 @@ void get_random_bytes(void *buf, int nbytes)
{
extract_entropy(&nonblocking_pool, buf, nbytes, 0, 0);
}
-
EXPORT_SYMBOL(get_random_bytes);
/*
@@ -894,12 +893,11 @@ static void init_std_data(struct entropy_store *r)
spin_unlock_irqrestore(&r->lock, flags);
now = ktime_get_real();
- add_entropy_words(r, (__u32 *)&now, sizeof(now)/4);
- add_entropy_words(r, (__u32 *)utsname(),
- sizeof(*(utsname()))/4);
+ mix_pool_bytes(r, &now, sizeof(now));
+ mix_pool_bytes(r, utsname(), sizeof(*(utsname())));
}
-static int __init rand_initialize(void)
+static int rand_initialize(void)
{
init_std_data(&input_pool);
init_std_data(&blocking_pool);
@@ -940,7 +938,7 @@ void rand_initialize_disk(struct gendisk *disk)
#endif
static ssize_t
-random_read(struct file * file, char __user * buf, size_t nbytes, loff_t *ppos)
+random_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
{
ssize_t n, retval = 0, count = 0;
@@ -1002,8 +1000,7 @@ random_read(struct file * file, char __user * buf, size_t nbytes, loff_t *ppos)
}
static ssize_t
-urandom_read(struct file * file, char __user * buf,
- size_t nbytes, loff_t *ppos)
+urandom_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
{
return extract_entropy_user(&nonblocking_pool, buf, nbytes);
}
@@ -1038,16 +1035,15 @@ write_pool(struct entropy_store *r, const char __user *buffer, size_t count)
count -= bytes;
p += bytes;
- add_entropy_words(r, buf, (bytes + 3) / 4);
+ mix_pool_bytes(r, buf, bytes);
cond_resched();
}
return 0;
}
-static ssize_t
-random_write(struct file * file, const char __user * buffer,
- size_t count, loff_t *ppos)
+static ssize_t random_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
size_t ret;
struct inode *inode = file->f_path.dentry->d_inode;
@@ -1064,9 +1060,7 @@ random_write(struct file * file, const char __user * buffer,
return (ssize_t)count;
}
-static int
-random_ioctl(struct inode * inode, struct file * file,
- unsigned int cmd, unsigned long arg)
+static long random_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
{
int size, ent_count;
int __user *p = (int __user *)arg;
@@ -1074,8 +1068,8 @@ random_ioctl(struct inode * inode, struct file * file,
switch (cmd) {
case RNDGETENTCNT:
- ent_count = input_pool.entropy_count;
- if (put_user(ent_count, p))
+ /* inherently racy, no point locking */
+ if (put_user(input_pool.entropy_count, p))
return -EFAULT;
return 0;
case RNDADDTOENTCNT:
@@ -1083,13 +1077,7 @@ random_ioctl(struct inode * inode, struct file * file,
return -EPERM;
if (get_user(ent_count, p))
return -EFAULT;
- credit_entropy_store(&input_pool, ent_count);
- /*
- * Wake up waiting processes if we have enough
- * entropy.
- */
- if (input_pool.entropy_count >= random_read_wakeup_thresh)
- wake_up_interruptible(&random_read_wait);
+ credit_entropy_bits(&input_pool, ent_count);
return 0;
case RNDADDENTROPY:
if (!capable(CAP_SYS_ADMIN))
@@ -1104,39 +1092,45 @@ random_ioctl(struct inode * inode, struct file * file,
size);
if (retval < 0)
return retval;
- credit_entropy_store(&input_pool, ent_count);
- /*
- * Wake up waiting processes if we have enough
- * entropy.
- */
- if (input_pool.entropy_count >= random_read_wakeup_thresh)
- wake_up_interruptible(&random_read_wait);
+ credit_entropy_bits(&input_pool, ent_count);
return 0;
case RNDZAPENTCNT:
case RNDCLEARPOOL:
/* Clear the entropy pool counters. */
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- init_std_data(&input_pool);
- init_std_data(&blocking_pool);
- init_std_data(&nonblocking_pool);
+ rand_initialize();
return 0;
default:
return -EINVAL;
}
}
+static int random_fasync(int fd, struct file *filp, int on)
+{
+ return fasync_helper(fd, filp, on, &fasync);
+}
+
+static int random_release(struct inode *inode, struct file *filp)
+{
+ return fasync_helper(-1, filp, 0, &fasync);
+}
+
const struct file_operations random_fops = {
.read = random_read,
.write = random_write,
.poll = random_poll,
- .ioctl = random_ioctl,
+ .unlocked_ioctl = random_ioctl,
+ .fasync = random_fasync,
+ .release = random_release,
};
const struct file_operations urandom_fops = {
.read = urandom_read,
.write = random_write,
- .ioctl = random_ioctl,
+ .unlocked_ioctl = random_ioctl,
+ .fasync = random_fasync,
+ .release = random_release,
};
/***************************************************************
@@ -1157,7 +1151,6 @@ void generate_random_uuid(unsigned char uuid_out[16])
/* Set the UUID variant to DCE */
uuid_out[8] = (uuid_out[8] & 0x3F) | 0x80;
}
-
EXPORT_SYMBOL(generate_random_uuid);
/********************************************************************
@@ -1339,7 +1332,7 @@ ctl_table random_table[] = {
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-static __u32 twothirdsMD4Transform (__u32 const buf[4], __u32 const in[12])
+static __u32 twothirdsMD4Transform(__u32 const buf[4], __u32 const in[12])
{
__u32 a = buf[0], b = buf[1], c = buf[2], d = buf[3];
@@ -1487,8 +1480,8 @@ __u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr,
*/
memcpy(hash, saddr, 16);
- hash[4]=((__force u16)sport << 16) + (__force u16)dport;
- memcpy(&hash[5],keyptr->secret,sizeof(__u32) * 7);
+ hash[4] = ((__force u16)sport << 16) + (__force u16)dport;
+ memcpy(&hash[5], keyptr->secret, sizeof(__u32) * 7);
seq = twothirdsMD4Transform((const __u32 *)daddr, hash) & HASH_MASK;
seq += keyptr->count;
@@ -1538,10 +1531,10 @@ __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
* Note that the words are placed into the starting vector, which is
* then mixed with a partial MD4 over random data.
*/
- hash[0]=(__force u32)saddr;
- hash[1]=(__force u32)daddr;
- hash[2]=((__force u16)sport << 16) + (__force u16)dport;
- hash[3]=keyptr->secret[11];
+ hash[0] = (__force u32)saddr;
+ hash[1] = (__force u32)daddr;
+ hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
+ hash[3] = keyptr->secret[11];
seq = half_md4_transform(hash, keyptr->secret) & HASH_MASK;
seq += keyptr->count;
@@ -1556,10 +1549,7 @@ __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
* Choosing a clock of 64 ns period is OK. (period of 274 s)
*/
seq += ktime_to_ns(ktime_get_real()) >> 6;
-#if 0
- printk("init_seq(%lx, %lx, %d, %d) = %d\n",
- saddr, daddr, sport, dport, seq);
-#endif
+
return seq;
}
@@ -1582,14 +1572,15 @@ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, __be16 dport)
+u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+ __be16 dport)
{
struct keydata *keyptr = get_keyptr();
u32 hash[12];
memcpy(hash, saddr, 16);
hash[4] = (__force u32)dport;
- memcpy(&hash[5],keyptr->secret,sizeof(__u32) * 7);
+ memcpy(&hash[5], keyptr->secret, sizeof(__u32) * 7);
return twothirdsMD4Transform((const __u32 *)daddr, hash);
}
@@ -1617,13 +1608,9 @@ u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
seq += ktime_to_ns(ktime_get_real());
seq &= (1ull << 48) - 1;
-#if 0
- printk("dccp init_seq(%lx, %lx, %d, %d) = %d\n",
- saddr, daddr, sport, dport, seq);
-#endif
+
return seq;
}
-
EXPORT_SYMBOL(secure_dccp_sequence_number);
#endif
diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
index f4f837f8682..a03a538a3ef 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/char/rio/cirrus.h
@@ -43,83 +43,83 @@
/* Bit fields for particular registers shared with driver */
/* COR1 - driver and RTA */
-#define COR1_ODD 0x80 /* Odd parity */
-#define COR1_EVEN 0x00 /* Even parity */
-#define COR1_NOP 0x00 /* No parity */
-#define COR1_FORCE 0x20 /* Force parity */
-#define COR1_NORMAL 0x40 /* With parity */
-#define COR1_1STOP 0x00 /* 1 stop bit */
-#define COR1_15STOP 0x04 /* 1.5 stop bits */
-#define COR1_2STOP 0x08 /* 2 stop bits */
-#define COR1_5BITS 0x00 /* 5 data bits */
-#define COR1_6BITS 0x01 /* 6 data bits */
-#define COR1_7BITS 0x02 /* 7 data bits */
-#define COR1_8BITS 0x03 /* 8 data bits */
-
-#define COR1_HOST 0xef /* Safe host bits */
+#define RIOC_COR1_ODD 0x80 /* Odd parity */
+#define RIOC_COR1_EVEN 0x00 /* Even parity */
+#define RIOC_COR1_NOP 0x00 /* No parity */
+#define RIOC_COR1_FORCE 0x20 /* Force parity */
+#define RIOC_COR1_NORMAL 0x40 /* With parity */
+#define RIOC_COR1_1STOP 0x00 /* 1 stop bit */
+#define RIOC_COR1_15STOP 0x04 /* 1.5 stop bits */
+#define RIOC_COR1_2STOP 0x08 /* 2 stop bits */
+#define RIOC_COR1_5BITS 0x00 /* 5 data bits */
+#define RIOC_COR1_6BITS 0x01 /* 6 data bits */
+#define RIOC_COR1_7BITS 0x02 /* 7 data bits */
+#define RIOC_COR1_8BITS 0x03 /* 8 data bits */
+
+#define RIOC_COR1_HOST 0xef /* Safe host bits */
/* RTA only */
-#define COR1_CINPCK 0x00 /* Check parity of received characters */
-#define COR1_CNINPCK 0x10 /* Don't check parity */
+#define RIOC_COR1_CINPCK 0x00 /* Check parity of received characters */
+#define RIOC_COR1_CNINPCK 0x10 /* Don't check parity */
/* COR2 bits for both RTA and driver use */
-#define COR2_IXANY 0x80 /* IXANY - any character is XON */
-#define COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */
-#define COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */
+#define RIOC_COR2_IXANY 0x80 /* IXANY - any character is XON */
+#define RIOC_COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */
+#define RIOC_COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */
/* Additional driver bits */
-#define COR2_HUPCL 0x20 /* Hang up on close */
-#define COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */
-#define COR2_IXOFF 0x01 /* Enable rx software flow control */
-#define COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */
+#define RIOC_COR2_HUPCL 0x20 /* Hang up on close */
+#define RIOC_COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */
+#define RIOC_COR2_IXOFF 0x01 /* Enable rx software flow control */
+#define RIOC_COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */
/* RTA use only */
-#define COR2_ETC 0x20 /* Embedded transmit options */
-#define COR2_LOCAL 0x10 /* Local loopback mode */
-#define COR2_REMOTE 0x08 /* Remote loopback mode */
-#define COR2_HOST 0xc2 /* Safe host bits */
+#define RIOC_COR2_ETC 0x20 /* Embedded transmit options */
+#define RIOC_COR2_LOCAL 0x10 /* Local loopback mode */
+#define RIOC_COR2_REMOTE 0x08 /* Remote loopback mode */
+#define RIOC_COR2_HOST 0xc2 /* Safe host bits */
/* COR3 - RTA use only */
-#define COR3_SCDRNG 0x80 /* Enable special char detect for range */
-#define COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */
-#define COR3_FCT 0x20 /* Flow control transparency */
-#define COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */
-#define COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */
-#define COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */
-#define COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */
-#define COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */
-
-#define COR3_THRESHOLD COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */
-
-#define COR3_DEFAULT (COR3_FCT | COR3_THRESHOLD)
+#define RIOC_COR3_SCDRNG 0x80 /* Enable special char detect for range */
+#define RIOC_COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */
+#define RIOC_COR3_FCT 0x20 /* Flow control transparency */
+#define RIOC_COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */
+#define RIOC_COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */
+#define RIOC_COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */
+#define RIOC_COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */
+#define RIOC_COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */
+
+#define RIOC_COR3_THRESHOLD RIOC_COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */
+
+#define RIOC_COR3_DEFAULT (RIOC_COR3_FCT | RIOC_COR3_THRESHOLD)
/* Default bits for COR3 */
/* COR4 driver and RTA use */
-#define COR4_IGNCR 0x80 /* Throw away CR's on input */
-#define COR4_ICRNL 0x40 /* Map CR -> NL on input */
-#define COR4_INLCR 0x20 /* Map NL -> CR on input */
-#define COR4_IGNBRK 0x10 /* Ignore Break */
-#define COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */
-#define COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */
+#define RIOC_COR4_IGNCR 0x80 /* Throw away CR's on input */
+#define RIOC_COR4_ICRNL 0x40 /* Map CR -> NL on input */
+#define RIOC_COR4_INLCR 0x20 /* Map NL -> CR on input */
+#define RIOC_COR4_IGNBRK 0x10 /* Ignore Break */
+#define RIOC_COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */
+#define RIOC_COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */
/* COR4 driver only */
-#define COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */
-#define COR4_PARMRK 0x02 /* PARMRK */
+#define RIOC_COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */
+#define RIOC_COR4_PARMRK 0x02 /* PARMRK */
-#define COR4_HOST 0xf8 /* Safe host bits */
+#define RIOC_COR4_HOST 0xf8 /* Safe host bits */
/* COR4 RTA only */
-#define COR4_CIGNPAR 0x02 /* Thrown away bad characters */
-#define COR4_CPARMRK 0x04 /* PARMRK characters */
-#define COR4_CNPARMRK 0x03 /* Don't PARMRK */
+#define RIOC_COR4_CIGNPAR 0x02 /* Thrown away bad characters */
+#define RIOC_COR4_CPARMRK 0x04 /* PARMRK characters */
+#define RIOC_COR4_CNPARMRK 0x03 /* Don't PARMRK */
/* COR5 driver and RTA use */
-#define COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */
-#define COR5_LNE 0x40 /* Enable LNEXT processing */
-#define COR5_CMOE 0x20 /* Match good and errored characters */
-#define COR5_ONLCR 0x02 /* NL -> CR NL on output */
-#define COR5_OCRNL 0x01 /* CR -> NL on output */
+#define RIOC_COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */
+#define RIOC_COR5_LNE 0x40 /* Enable LNEXT processing */
+#define RIOC_COR5_CMOE 0x20 /* Match good and errored characters */
+#define RIOC_COR5_ONLCR 0x02 /* NL -> CR NL on output */
+#define RIOC_COR5_OCRNL 0x01 /* CR -> NL on output */
/*
** Spare bits - these are not used in the CIRRUS registers, so we use
@@ -128,86 +128,86 @@
/*
** tstop and tbusy indication
*/
-#define COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */
-#define COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */
+#define RIOC_COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */
+#define RIOC_COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */
/*
** TAB3
*/
-#define COR5_TAB3 0x10 /* TAB3 mode */
+#define RIOC_COR5_TAB3 0x10 /* TAB3 mode */
-#define COR5_HOST 0xc3 /* Safe host bits */
+#define RIOC_COR5_HOST 0xc3 /* Safe host bits */
/* CCSR */
-#define CCSR_TXFLOFF 0x04 /* Tx is xoffed */
+#define RIOC_CCSR_TXFLOFF 0x04 /* Tx is xoffed */
/* MSVR1 */
/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the
RTA. This is because otherwise DCD would get lost on the 1 parallel / 3
serial option.
*/
-#define MSVR1_CD 0x80 /* CD (DSR on Cirrus) */
-#define MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */
-#define MSVR1_RI 0x20 /* RI */
-#define MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */
-#define MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */
+#define RIOC_MSVR1_CD 0x80 /* CD (DSR on Cirrus) */
+#define RIOC_MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */
+#define RIOC_MSVR1_RI 0x20 /* RI */
+#define RIOC_MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */
+#define RIOC_MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */
/* Next two used to indicate state of tbusy and tstop to driver */
-#define MSVR1_TSTOP 0x08 /* Set if port flow controlled */
-#define MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */
+#define RIOC_MSVR1_TSTOP 0x08 /* Set if port flow controlled */
+#define RIOC_MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */
-#define MSVR1_HOST 0xf3 /* The bits the host wants */
+#define RIOC_MSVR1_HOST 0xf3 /* The bits the host wants */
/* Defines for the subscripts of a CONFIG packet */
-#define CONFIG_COR1 1 /* Option register 1 */
-#define CONFIG_COR2 2 /* Option register 2 */
-#define CONFIG_COR4 3 /* Option register 4 */
-#define CONFIG_COR5 4 /* Option register 5 */
-#define CONFIG_TXXON 5 /* Tx XON character */
-#define CONFIG_TXXOFF 6 /* Tx XOFF character */
-#define CONFIG_RXXON 7 /* Rx XON character */
-#define CONFIG_RXXOFF 8 /* Rx XOFF character */
-#define CONFIG_LNEXT 9 /* LNEXT character */
-#define CONFIG_TXBAUD 10 /* Tx baud rate */
-#define CONFIG_RXBAUD 11 /* Rx baud rate */
-
-#define PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */
+#define RIOC_CONFIG_COR1 1 /* Option register 1 */
+#define RIOC_CONFIG_COR2 2 /* Option register 2 */
+#define RIOC_CONFIG_COR4 3 /* Option register 4 */
+#define RIOC_CONFIG_COR5 4 /* Option register 5 */
+#define RIOC_CONFIG_TXXON 5 /* Tx XON character */
+#define RIOC_CONFIG_TXXOFF 6 /* Tx XOFF character */
+#define RIOC_CONFIG_RXXON 7 /* Rx XON character */
+#define RIOC_CONFIG_RXXOFF 8 /* Rx XOFF character */
+#define RIOC_CONFIG_LNEXT 9 /* LNEXT character */
+#define RIOC_CONFIG_TXBAUD 10 /* Tx baud rate */
+#define RIOC_CONFIG_RXBAUD 11 /* Rx baud rate */
+
+#define RIOC_PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */
/* Packet types going from Host to remote - with the exception of OPEN, MOPEN,
CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not
be used
*/
-#define OPEN 0x00 /* Open a port */
-#define CONFIG 0x01 /* Configure a port */
-#define MOPEN 0x02 /* Modem open (block for DCD) */
-#define CLOSE 0x03 /* Close a port */
-#define WFLUSH (0x04 | PRE_EMPTIVE) /* Write flush */
-#define RFLUSH (0x05 | PRE_EMPTIVE) /* Read flush */
-#define RESUME (0x06 | PRE_EMPTIVE) /* Resume if xoffed */
-#define SBREAK 0x07 /* Start break */
-#define EBREAK 0x08 /* End break */
-#define SUSPEND (0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
-#define FCLOSE (0x0a | PRE_EMPTIVE) /* Force close */
-#define XPRINT 0x0b /* Xprint packet */
-#define MBIS (0x0c | PRE_EMPTIVE) /* Set modem lines */
-#define MBIC (0x0d | PRE_EMPTIVE) /* Clear modem lines */
-#define MSET (0x0e | PRE_EMPTIVE) /* Set modem lines */
-#define PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */
-#define MGET (0x10 | PRE_EMPTIVE) /* Force update of modem status */
-#define MEMDUMP (0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */
-#define READ_REGISTER (0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */
+#define RIOC_OPEN 0x00 /* Open a port */
+#define RIOC_CONFIG 0x01 /* Configure a port */
+#define RIOC_MOPEN 0x02 /* Modem open (block for DCD) */
+#define RIOC_CLOSE 0x03 /* Close a port */
+#define RIOC_WFLUSH (0x04 | RIOC_PRE_EMPTIVE) /* Write flush */
+#define RIOC_RFLUSH (0x05 | RIOC_PRE_EMPTIVE) /* Read flush */
+#define RIOC_RESUME (0x06 | RIOC_PRE_EMPTIVE) /* Resume if xoffed */
+#define RIOC_SBREAK 0x07 /* Start break */
+#define RIOC_EBREAK 0x08 /* End break */
+#define RIOC_SUSPEND (0x09 | RIOC_PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
+#define RIOC_FCLOSE (0x0a | RIOC_PRE_EMPTIVE) /* Force close */
+#define RIOC_XPRINT 0x0b /* Xprint packet */
+#define RIOC_MBIS (0x0c | RIOC_PRE_EMPTIVE) /* Set modem lines */
+#define RIOC_MBIC (0x0d | RIOC_PRE_EMPTIVE) /* Clear modem lines */
+#define RIOC_MSET (0x0e | RIOC_PRE_EMPTIVE) /* Set modem lines */
+#define RIOC_PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */
+#define RIOC_MGET (0x10 | RIOC_PRE_EMPTIVE) /* Force update of modem status */
+#define RIOC_MEMDUMP (0x11 | RIOC_PRE_EMPTIVE) /* Send back mem from addr supplied */
+#define RIOC_READ_REGISTER (0x12 | RIOC_PRE_EMPTIVE) /* Read CD1400 register (debug) */
/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
use data[4] / data[3] to indicate current state and modem status respectively
*/
-#define COMPLETE (0x20 | PRE_EMPTIVE)
+#define RIOC_COMPLETE (0x20 | RIOC_PRE_EMPTIVE)
/* Command complete */
-#define BREAK_RECEIVED (0x21 | PRE_EMPTIVE)
+#define RIOC_BREAK_RECEIVED (0x21 | RIOC_PRE_EMPTIVE)
/* Break received */
-#define MODEM_STATUS (0x22 | PRE_EMPTIVE)
+#define RIOC_MODEM_STATUS (0x22 | RIOC_PRE_EMPTIVE)
/* Change in modem status */
/* "Command" packet that could go either way - handshake wake-up */
-#define HANDSHAKE (0x23 | PRE_EMPTIVE)
+#define RIOC_HANDSHAKE (0x23 | RIOC_PRE_EMPTIVE)
/* Wake-up to HOST / RTA */
#endif
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index 0ce96670f97..412777cd1e6 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -344,7 +344,7 @@ int rio_minor(struct tty_struct *tty)
static int rio_set_real_termios(void *ptr)
{
- return RIOParam((struct Port *) ptr, CONFIG, 1, 1);
+ return RIOParam((struct Port *) ptr, RIOC_CONFIG, 1, 1);
}
@@ -487,7 +487,7 @@ static int rio_get_CD(void *ptr)
int rv;
func_enter();
- rv = (PortP->ModemState & MSVR1_CD) != 0;
+ rv = (PortP->ModemState & RIOC_MSVR1_CD) != 0;
rio_dprintk(RIO_DEBUG_INIT, "Getting CD status: %d\n", rv);
@@ -607,7 +607,8 @@ static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd
rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n");
rc = -EIO;
} else {
- if (RIOShortCommand(p, PortP, SBREAK, 2, 250) == RIO_FAIL) {
+ if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, 250) ==
+ RIO_FAIL) {
rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n");
rc = -EIO;
}
@@ -622,7 +623,8 @@ static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd
l = arg ? arg * 100 : 250;
if (l > 255)
l = 255;
- if (RIOShortCommand(p, PortP, SBREAK, 2, arg ? arg * 100 : 250) == RIO_FAIL) {
+ if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2,
+ arg ? arg * 100 : 250) == RIO_FAIL) {
rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n");
rc = -EIO;
}
diff --git a/drivers/char/rio/rio_linux.h b/drivers/char/rio/rio_linux.h
index dc3f005614a..7f26cd7c815 100644
--- a/drivers/char/rio/rio_linux.h
+++ b/drivers/char/rio/rio_linux.h
@@ -186,9 +186,9 @@ static inline void *rio_memcpy_fromio(void *dest, void __iomem *source, int n)
#ifdef DEBUG
#define rio_dprintk(f, str...) do { if (rio_debug & f) printk (str);} while (0)
-#define func_enter() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s\n", __FUNCTION__)
-#define func_exit() rio_dprintk (RIO_DEBUG_FLOW, "rio: exit %s\n", __FUNCTION__)
-#define func_enter2() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s (port %d)\n",__FUNCTION__, port->line)
+#define func_enter() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s\n", __func__)
+#define func_exit() rio_dprintk (RIO_DEBUG_FLOW, "rio: exit %s\n", __func__)
+#define func_enter2() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s (port %d)\n",__func__, port->line)
#else
#define rio_dprintk(f, str...) /* nothing */
#define func_enter()
diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c
index bf36959fc12..7b96e081488 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/char/rio/riocmd.c
@@ -417,7 +417,7 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struc
PortP = p->RIOPortp[SysPort];
rio_spin_lock_irqsave(&PortP->portSem, flags);
switch (readb(&PktCmdP->Command)) {
- case BREAK_RECEIVED:
+ case RIOC_BREAK_RECEIVED:
rio_dprintk(RIO_DEBUG_CMD, "Received a break!\n");
/* If the current line disc. is not multi-threading and
the current processor is not the default, reset rup_intr
@@ -428,16 +428,16 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struc
gs_got_break(&PortP->gs);
break;
- case COMPLETE:
+ case RIOC_COMPLETE:
rio_dprintk(RIO_DEBUG_CMD, "Command complete on phb %d host %Zd\n", readb(&PktCmdP->PhbNum), HostP - p->RIOHosts);
subCommand = 1;
switch (readb(&PktCmdP->SubCommand)) {
- case MEMDUMP:
+ case RIOC_MEMDUMP:
rio_dprintk(RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n", readb(&PktCmdP->SubCommand), readw(&PktCmdP->SubAddr));
break;
- case READ_REGISTER:
+ case RIOC_READ_REGISTER:
rio_dprintk(RIO_DEBUG_CMD, "Read register (0x%x)\n", readw(&PktCmdP->SubAddr));
- p->CdRegister = (readb(&PktCmdP->ModemStatus) & MSVR1_HOST);
+ p->CdRegister = (readb(&PktCmdP->ModemStatus) & RIOC_MSVR1_HOST);
break;
default:
subCommand = 0;
@@ -456,14 +456,15 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struc
rio_dprintk(RIO_DEBUG_CMD, "No change\n");
/* FALLTHROUGH */
- case MODEM_STATUS:
+ case RIOC_MODEM_STATUS:
/*
** Knock out the tbusy and tstop bits, as these are not relevant
** to the check for modem status change (they're just there because
** it's a convenient place to put them!).
*/
ReportedModemStatus = readb(&PktCmdP->ModemStatus);
- if ((PortP->ModemState & MSVR1_HOST) == (ReportedModemStatus & MSVR1_HOST)) {
+ if ((PortP->ModemState & RIOC_MSVR1_HOST) ==
+ (ReportedModemStatus & RIOC_MSVR1_HOST)) {
rio_dprintk(RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState);
/*
** Update ModemState just in case tbusy or tstop states have
@@ -497,7 +498,7 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struc
/*
** Is there a carrier?
*/
- if (PortP->ModemState & MSVR1_CD) {
+ if (PortP->ModemState & RIOC_MSVR1_CD) {
/*
** Has carrier just appeared?
*/
@@ -691,7 +692,7 @@ void RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
*/
rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
FreeMe = RIOCommandRup(p, Rup, HostP, PacketP);
- if (readb(&PacketP->data[5]) == MEMDUMP) {
+ if (readb(&PacketP->data[5]) == RIOC_MEMDUMP) {
rio_dprintk(RIO_DEBUG_CMD, "Memdump from 0x%x complete\n", readw(&(PacketP->data[6])));
rio_memcpy_fromio(p->RIOMemDump, &(PacketP->data[8]), 32);
}
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index d8eb2bcbe01..d65ceb9a434 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -422,7 +422,8 @@ int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su
}
rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (RIOPreemptiveCmd(p, (p->RIOPortp[port]), RESUME) == RIO_FAIL) {
+ if (RIOPreemptiveCmd(p, (p->RIOPortp[port]), RIOC_RESUME) ==
+ RIO_FAIL) {
rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME failed\n");
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
return -EBUSY;
@@ -636,7 +637,8 @@ int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su
return -ENXIO;
}
PortP = (p->RIOPortp[PortTty.port]);
- RIOParam(PortP, CONFIG, PortP->State & RIO_MODEM, OK_TO_SLEEP);
+ RIOParam(PortP, RIOC_CONFIG, PortP->State & RIO_MODEM,
+ OK_TO_SLEEP);
return retval;
case RIO_SET_PORT_PARAMS:
@@ -1247,7 +1249,7 @@ int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su
rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (RIOPreemptiveCmd(p, PortP, MEMDUMP) == RIO_FAIL) {
+ if (RIOPreemptiveCmd(p, PortP, RIOC_MEMDUMP) == RIO_FAIL) {
rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP failed\n");
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
return -EBUSY;
@@ -1313,7 +1315,8 @@ int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su
rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (RIOPreemptiveCmd(p, PortP, READ_REGISTER) == RIO_FAIL) {
+ if (RIOPreemptiveCmd(p, PortP, RIOC_READ_REGISTER) ==
+ RIO_FAIL) {
rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER failed\n");
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
return -EBUSY;
@@ -1434,50 +1437,50 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
PktCmdP->PhbNum = port;
switch (Cmd) {
- case MEMDUMP:
+ case RIOC_MEMDUMP:
rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
"(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
- PktCmdP->SubCommand = MEMDUMP;
+ PktCmdP->SubCommand = RIOC_MEMDUMP;
PktCmdP->SubAddr = SubCmd.Addr;
break;
- case FCLOSE:
+ case RIOC_FCLOSE:
rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
CmdBlkP);
break;
- case READ_REGISTER:
+ case RIOC_READ_REGISTER:
rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
"command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
- PktCmdP->SubCommand = READ_REGISTER;
+ PktCmdP->SubCommand = RIOC_READ_REGISTER;
PktCmdP->SubAddr = SubCmd.Addr;
break;
- case RESUME:
+ case RIOC_RESUME:
rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
CmdBlkP);
break;
- case RFLUSH:
+ case RIOC_RFLUSH:
rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
CmdBlkP);
CmdBlkP->PostFuncP = RIORFlushEnable;
break;
- case SUSPEND:
+ case RIOC_SUSPEND:
rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
CmdBlkP);
break;
- case MGET:
+ case RIOC_MGET:
rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
CmdBlkP);
break;
- case MSET:
- case MBIC:
- case MBIS:
+ case RIOC_MSET:
+ case RIOC_MBIC:
+ case RIOC_MBIS:
CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
"blk %p\n", CmdBlkP);
break;
- case WFLUSH:
+ case RIOC_WFLUSH:
/*
** If we have queued up the maximum number of Write flushes
** allowed then we should not bother sending any more to the
diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c
index 4734e26e1cc..ea21686c69a 100644
--- a/drivers/char/rio/riointr.c
+++ b/drivers/char/rio/riointr.c
@@ -401,9 +401,8 @@ void RIOServiceHost(struct rio_info *p, struct Host *HostP)
PortP->InUse = NOT_INUSE;
rio_spin_unlock(&PortP->portSem);
- if (RIOParam(PortP, OPEN, ((PortP->Cor2Copy & (COR2_RTSFLOW | COR2_CTSFLOW)) == (COR2_RTSFLOW | COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL) {
+ if (RIOParam(PortP, RIOC_OPEN, ((PortP->Cor2Copy & (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) == (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL)
continue; /* with next port */
- }
rio_spin_lock(&PortP->portSem);
PortP->MagicFlags &= ~MAGIC_REBOOT;
}
@@ -429,7 +428,7 @@ void RIOServiceHost(struct rio_info *p, struct Host *HostP)
*/
PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0];
- writeb(WFLUSH, &PktCmdP->Command);
+ writeb(RIOC_WFLUSH, &PktCmdP->Command);
p = PortP->HostPort % (u16) PORTS_PER_RTA;
diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c
index da276ed57b3..4810b845cc2 100644
--- a/drivers/char/rio/rioparam.c
+++ b/drivers/char/rio/rioparam.c
@@ -177,7 +177,7 @@ int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
}
rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (cmd == OPEN) {
+ if (cmd == RIOC_OPEN) {
/*
** If the port is set to store or lock the parameters, and it is
** paramed with OPEN, we want to restore the saved port termio, but
@@ -241,50 +241,50 @@ int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
case CS5:
{
rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n");
- Cor1 |= COR1_5BITS;
+ Cor1 |= RIOC_COR1_5BITS;
break;
}
case CS6:
{
rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n");
- Cor1 |= COR1_6BITS;
+ Cor1 |= RIOC_COR1_6BITS;
break;
}
case CS7:
{
rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n");
- Cor1 |= COR1_7BITS;
+ Cor1 |= RIOC_COR1_7BITS;
break;
}
case CS8:
{
rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n");
- Cor1 |= COR1_8BITS;
+ Cor1 |= RIOC_COR1_8BITS;
break;
}
}
if (TtyP->termios->c_cflag & CSTOPB) {
rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n");
- Cor1 |= COR1_2STOP;
+ Cor1 |= RIOC_COR1_2STOP;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n");
- Cor1 |= COR1_1STOP;
+ Cor1 |= RIOC_COR1_1STOP;
}
if (TtyP->termios->c_cflag & PARENB) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n");
- Cor1 |= COR1_NORMAL;
+ Cor1 |= RIOC_COR1_NORMAL;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n");
- Cor1 |= COR1_NOP;
+ Cor1 |= RIOC_COR1_NOP;
}
if (TtyP->termios->c_cflag & PARODD) {
rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n");
- Cor1 |= COR1_ODD;
+ Cor1 |= RIOC_COR1_ODD;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n");
- Cor1 |= COR1_EVEN;
+ Cor1 |= RIOC_COR1_EVEN;
}
/*
@@ -292,11 +292,11 @@ int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
*/
if (TtyP->termios->c_iflag & IXON) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n");
- Cor2 |= COR2_IXON;
+ Cor2 |= RIOC_COR2_IXON;
} else {
if (PortP->Config & RIO_IXON) {
rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n");
- Cor2 |= COR2_IXON;
+ Cor2 |= RIOC_COR2_IXON;
} else
rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n");
}
@@ -304,29 +304,29 @@ int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
if (TtyP->termios->c_iflag & IXANY) {
if (PortP->Config & RIO_IXANY) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n");
- Cor2 |= COR2_IXANY;
+ Cor2 |= RIOC_COR2_IXANY;
} else
rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n");
}
if (TtyP->termios->c_iflag & IXOFF) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n");
- Cor2 |= COR2_IXOFF;
+ Cor2 |= RIOC_COR2_IXOFF;
}
if (TtyP->termios->c_cflag & HUPCL) {
rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n");
- Cor2 |= COR2_HUPCL;
+ Cor2 |= RIOC_COR2_HUPCL;
}
if (C_CRTSCTS(TtyP)) {
rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n");
- Cor2 |= COR2_CTSFLOW;
- Cor2 |= COR2_RTSFLOW;
+ Cor2 |= RIOC_COR2_CTSFLOW;
+ Cor2 |= RIOC_COR2_RTSFLOW;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n");
- Cor2 &= ~COR2_CTSFLOW;
- Cor2 &= ~COR2_RTSFLOW;
+ Cor2 &= ~RIOC_COR2_CTSFLOW;
+ Cor2 &= ~RIOC_COR2_RTSFLOW;
}
@@ -341,36 +341,36 @@ int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
*/
if (TtyP->termios->c_iflag & IGNBRK) {
rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n");
- Cor4 |= COR4_IGNBRK;
+ Cor4 |= RIOC_COR4_IGNBRK;
}
if (!(TtyP->termios->c_iflag & BRKINT)) {
rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n");
- Cor4 |= COR4_NBRKINT;
+ Cor4 |= RIOC_COR4_NBRKINT;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on break condition\n");
}
if (TtyP->termios->c_iflag & INLCR) {
rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n");
- Cor4 |= COR4_INLCR;
+ Cor4 |= RIOC_COR4_INLCR;
}
if (TtyP->termios->c_iflag & IGNCR) {
rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n");
- Cor4 |= COR4_IGNCR;
+ Cor4 |= RIOC_COR4_IGNCR;
}
if (TtyP->termios->c_iflag & ICRNL) {
rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n");
- Cor4 |= COR4_ICRNL;
+ Cor4 |= RIOC_COR4_ICRNL;
}
if (TtyP->termios->c_iflag & IGNPAR) {
rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n");
- Cor4 |= COR4_IGNPAR;
+ Cor4 |= RIOC_COR4_IGNPAR;
}
if (TtyP->termios->c_iflag & PARMRK) {
rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n");
- Cor4 |= COR4_PARMRK;
+ Cor4 |= RIOC_COR4_PARMRK;
}
/*
@@ -378,22 +378,22 @@ int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
** on reception of a config packet.
** The download code handles the zero baud condition.
*/
- Cor4 |= COR4_RAISEMOD;
+ Cor4 |= RIOC_COR4_RAISEMOD;
/*
** COR 5
*/
- Cor5 = COR5_CMOE;
+ Cor5 = RIOC_COR5_CMOE;
/*
** Set to monitor tbusy/tstop (or not).
*/
if (PortP->MonitorTstate)
- Cor5 |= COR5_TSTATE_ON;
+ Cor5 |= RIOC_COR5_TSTATE_ON;
else
- Cor5 |= COR5_TSTATE_OFF;
+ Cor5 |= RIOC_COR5_TSTATE_OFF;
/*
** Could set LNE here if you wanted LNext processing. SVR4 will use it.
@@ -401,24 +401,24 @@ int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
if (TtyP->termios->c_iflag & ISTRIP) {
rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n");
if (!(PortP->State & RIO_TRIAD_MODE)) {
- Cor5 |= COR5_ISTRIP;
+ Cor5 |= RIOC_COR5_ISTRIP;
}
}
if (TtyP->termios->c_oflag & ONLCR) {
rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n");
if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= COR5_ONLCR;
+ Cor5 |= RIOC_COR5_ONLCR;
}
if (TtyP->termios->c_oflag & OCRNL) {
rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n");
if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= COR5_OCRNL;
+ Cor5 |= RIOC_COR5_OCRNL;
}
if ((TtyP->termios->c_oflag & TABDLY) == TAB3) {
rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n");
if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= COR5_TAB3;
+ Cor5 |= RIOC_COR5_TAB3;
}
/*
diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c
index 1cb8580a161..c99354843be 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/char/rio/riotty.c
@@ -211,7 +211,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
rio_dprintk(RIO_DEBUG_TTY, "Waiting for RIO_CLOSING to go away\n");
if (repeat_this-- <= 0) {
rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n");
- RIOPreemptiveCmd(p, PortP, FCLOSE);
+ RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
retval = -EINTR;
goto bombout;
}
@@ -264,7 +264,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
here. If I read the docs correctly the "open"
command piggybacks the parameters immediately.
-- REW */
- RIOParam(PortP, OPEN, 1, OK_TO_SLEEP); /* Open the port */
+ RIOParam(PortP, RIOC_OPEN, 1, OK_TO_SLEEP); /* Open the port */
rio_spin_lock_irqsave(&PortP->portSem, flags);
/*
@@ -275,7 +275,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
rio_dprintk(RIO_DEBUG_TTY, "Waiting for open to finish broken by signal\n");
- RIOPreemptiveCmd(p, PortP, FCLOSE);
+ RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
func_exit();
return -EINTR;
}
@@ -297,7 +297,8 @@ int riotopen(struct tty_struct *tty, struct file *filp)
** insert test for carrier here. -- ???
** I already see that test here. What's the deal? -- REW
*/
- if ((PortP->gs.tty->termios->c_cflag & CLOCAL) || (PortP->ModemState & MSVR1_CD)) {
+ if ((PortP->gs.tty->termios->c_cflag & CLOCAL) ||
+ (PortP->ModemState & RIOC_MSVR1_CD)) {
rio_dprintk(RIO_DEBUG_TTY, "open(%d) Modem carr on\n", SysPort);
/*
tp->tm.c_state |= CARR_ON;
@@ -325,7 +326,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
** I think it's OK. -- REW
*/
rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr broken by signal\n", SysPort);
- RIOPreemptiveCmd(p, PortP, FCLOSE);
+ RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
/*
tp->tm.c_state &= ~WOPEN;
*/
@@ -416,7 +417,7 @@ int riotclose(void *ptr)
*/
PortP->State &= ~RIO_MOPEN;
PortP->State &= ~RIO_CARR_ON;
- PortP->ModemState &= ~MSVR1_CD;
+ PortP->ModemState &= ~RIOC_MSVR1_CD;
/*
** If the device was open as both a Modem and a tty line
** then we need to wimp out here, as the port has not really
@@ -453,7 +454,7 @@ int riotclose(void *ptr)
if (repeat_this-- <= 0) {
rv = -EINTR;
rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n");
- RIOPreemptiveCmd(p, PortP, FCLOSE);
+ RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
goto close_end;
}
rio_dprintk(RIO_DEBUG_TTY, "Calling timeout to flush in closing\n");
@@ -492,8 +493,8 @@ int riotclose(void *ptr)
/* Can't call RIOShortCommand with the port locked. */
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (RIOShortCommand(p, PortP, CLOSE, 1, 0) == RIO_FAIL) {
- RIOPreemptiveCmd(p, PortP, FCLOSE);
+ if (RIOShortCommand(p, PortP, RIOC_CLOSE, 1, 0) == RIO_FAIL) {
+ RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
rio_spin_lock_irqsave(&PortP->portSem, flags);
goto close_end;
}
@@ -503,7 +504,7 @@ int riotclose(void *ptr)
try--;
if (time_after(jiffies, end_time)) {
rio_dprintk(RIO_DEBUG_TTY, "Run out of tries - force the bugger shut!\n");
- RIOPreemptiveCmd(p, PortP, FCLOSE);
+ RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
break;
}
rio_dprintk(RIO_DEBUG_TTY, "Close: PortState:ISOPEN is %d\n", PortP->PortState & PORT_ISOPEN);
@@ -515,14 +516,14 @@ int riotclose(void *ptr)
}
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n");
- RIOPreemptiveCmd(p, PortP, FCLOSE);
+ RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
break;
}
}
rio_spin_lock_irqsave(&PortP->portSem, flags);
rio_dprintk(RIO_DEBUG_TTY, "Close: try was %d on completion\n", try);
- /* RIOPreemptiveCmd(p, PortP, FCLOSE); */
+ /* RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); */
/*
** 15.10.1998 ARG - ESIL 0761 part fix
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 3f9d0a9ac36..f073c710ab8 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -4,9 +4,9 @@
* Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
*
* This code is loosely based on the Linux serial driver, written by
- * Linus Torvalds, Theodore T'so and others. The RISCom/8 card
- * programming info was obtained from various drivers for other OSes
- * (FreeBSD, ISC, etc), but no source code from those drivers were
+ * Linus Torvalds, Theodore T'so and others. The RISCom/8 card
+ * programming info was obtained from various drivers for other OSes
+ * (FreeBSD, ISC, etc), but no source code from those drivers were
* directly included in this driver.
*
*
@@ -33,7 +33,7 @@
#include <linux/module.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ioport.h>
@@ -49,7 +49,7 @@
#include <linux/tty_flip.h>
#include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include "riscom8.h"
#include "riscom8_reg.h"
@@ -57,15 +57,15 @@
/* Am I paranoid or not ? ;-) */
#define RISCOM_PARANOIA_CHECK
-/*
- * Crazy InteliCom/8 boards sometimes has swapped CTS & DSR signals.
+/*
+ * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals.
* You can slightly speed up things by #undefing the following option,
- * if you are REALLY sure that your board is correct one.
+ * if you are REALLY sure that your board is correct one.
*/
#define RISCOM_BRAIN_DAMAGED_CTS
-/*
+/*
* The following defines are mostly for testing purposes. But if you need
* some nice reporting in your syslog, you can define them also.
*/
@@ -112,7 +112,7 @@ static unsigned short rc_ioport[] = {
#define RC_NIOPORT ARRAY_SIZE(rc_ioport)
-static inline int rc_paranoia_check(struct riscom_port const * port,
+static int rc_paranoia_check(struct riscom_port const *port,
char *name, const char *routine)
{
#ifdef RISCOM_PARANOIA_CHECK
@@ -134,52 +134,53 @@ static inline int rc_paranoia_check(struct riscom_port const * port,
}
/*
- *
+ *
* Service functions for RISCom/8 driver.
- *
+ *
*/
/* Get board number from pointer */
-static inline int board_No (struct riscom_board const * bp)
+static inline int board_No(struct riscom_board const *bp)
{
return bp - rc_board;
}
/* Get port number from pointer */
-static inline int port_No (struct riscom_port const * port)
+static inline int port_No(struct riscom_port const *port)
{
- return RC_PORT(port - rc_port);
+ return RC_PORT(port - rc_port);
}
/* Get pointer to board from pointer to port */
-static inline struct riscom_board * port_Board(struct riscom_port const * port)
+static inline struct riscom_board *port_Board(struct riscom_port const *port)
{
return &rc_board[RC_BOARD(port - rc_port)];
}
/* Input Byte from CL CD180 register */
-static inline unsigned char rc_in(struct riscom_board const * bp, unsigned short reg)
+static inline unsigned char rc_in(struct riscom_board const *bp,
+ unsigned short reg)
{
return inb(bp->base + RC_TO_ISA(reg));
}
/* Output Byte to CL CD180 register */
-static inline void rc_out(struct riscom_board const * bp, unsigned short reg,
+static inline void rc_out(struct riscom_board const *bp, unsigned short reg,
unsigned char val)
{
outb(val, bp->base + RC_TO_ISA(reg));
}
/* Wait for Channel Command Register ready */
-static inline void rc_wait_CCR(struct riscom_board const * bp)
+static void rc_wait_CCR(struct riscom_board const *bp)
{
unsigned long delay;
/* FIXME: need something more descriptive then 100000 :) */
- for (delay = 100000; delay; delay--)
+ for (delay = 100000; delay; delay--)
if (!rc_in(bp, CD180_CCR))
return;
-
+
printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
}
@@ -187,11 +188,11 @@ static inline void rc_wait_CCR(struct riscom_board const * bp)
* RISCom/8 probe functions.
*/
-static inline int rc_request_io_range(struct riscom_board * const bp)
+static int rc_request_io_range(struct riscom_board * const bp)
{
int i;
-
- for (i = 0; i < RC_NIOPORT; i++)
+
+ for (i = 0; i < RC_NIOPORT; i++)
if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
"RISCom/8")) {
goto out_release;
@@ -200,42 +201,42 @@ static inline int rc_request_io_range(struct riscom_board * const bp)
out_release:
printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
board_No(bp), bp->base);
- while(--i >= 0)
+ while (--i >= 0)
release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
return 1;
}
-static inline void rc_release_io_range(struct riscom_board * const bp)
+static void rc_release_io_range(struct riscom_board * const bp)
{
int i;
-
- for (i = 0; i < RC_NIOPORT; i++)
+
+ for (i = 0; i < RC_NIOPORT; i++)
release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
}
-
+
/* Reset and setup CD180 chip */
-static void __init rc_init_CD180(struct riscom_board const * bp)
+static void __init rc_init_CD180(struct riscom_board const *bp)
{
unsigned long flags;
-
+
spin_lock_irqsave(&riscom_lock, flags);
- rc_out(bp, RC_CTOUT, 0); /* Clear timeout */
- rc_wait_CCR(bp); /* Wait for CCR ready */
- rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */
+ rc_out(bp, RC_CTOUT, 0); /* Clear timeout */
+ rc_wait_CCR(bp); /* Wait for CCR ready */
+ rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */
spin_unlock_irqrestore(&riscom_lock, flags);
- msleep(50); /* Delay 0.05 sec */
+ msleep(50); /* Delay 0.05 sec */
spin_lock_irqsave(&riscom_lock, flags);
- rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */
- rc_out(bp, CD180_GICR, 0); /* Clear all bits */
- rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */
- rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for transmitter intr */
- rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for receiver intr */
-
+ rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */
+ rc_out(bp, CD180_GICR, 0); /* Clear all bits */
+ rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */
+ rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for tx intr */
+ rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for rx intr */
+
/* Setting up prescaler. We need 4 ticks per 1 ms */
rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
-
+
spin_unlock_irqrestore(&riscom_lock, flags);
}
@@ -245,12 +246,12 @@ static int __init rc_probe(struct riscom_board *bp)
unsigned char val1, val2;
int irqs = 0;
int retries;
-
+
bp->irq = 0;
if (rc_request_io_range(bp))
return 1;
-
+
/* Are the I/O ports here ? */
rc_out(bp, CD180_PPRL, 0x5a);
outb(0xff, 0x80);
@@ -258,34 +259,34 @@ static int __init rc_probe(struct riscom_board *bp)
rc_out(bp, CD180_PPRL, 0xa5);
outb(0x00, 0x80);
val2 = rc_in(bp, CD180_PPRL);
-
+
if ((val1 != 0x5a) || (val2 != 0xa5)) {
printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
board_No(bp), bp->base);
goto out_release;
}
-
+
/* It's time to find IRQ for this board */
- for (retries = 0; retries < 5 && irqs <= 0; retries++) {
+ for (retries = 0; retries < 5 && irqs <= 0; retries++) {
irqs = probe_irq_on();
- rc_init_CD180(bp); /* Reset CD180 chip */
- rc_out(bp, CD180_CAR, 2); /* Select port 2 */
+ rc_init_CD180(bp); /* Reset CD180 chip */
+ rc_out(bp, CD180_CAR, 2); /* Select port 2 */
rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */
- rc_out(bp, CD180_IER, IER_TXRDY); /* Enable tx empty intr */
+ rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */
+ rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr */
msleep(50);
irqs = probe_irq_off(irqs);
- val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */
- val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */
- rc_init_CD180(bp); /* Reset CD180 again */
-
+ val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */
+ val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */
+ rc_init_CD180(bp); /* Reset CD180 again */
+
if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) {
printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
"found.\n", board_No(bp), bp->base);
goto out_release;
}
}
-
+
if (irqs <= 0) {
printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
"at 0x%03x.\n", board_No(bp), bp->base);
@@ -293,113 +294,112 @@ static int __init rc_probe(struct riscom_board *bp)
}
bp->irq = irqs;
bp->flags |= RC_BOARD_PRESENT;
-
+
printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
"0x%03x, IRQ %d.\n",
board_No(bp),
(rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */
bp->base, bp->irq);
-
+
return 0;
out_release:
rc_release_io_range(bp);
return 1;
}
-/*
- *
+/*
+ *
* Interrupt processing routines.
- *
+ *
*/
-static inline struct riscom_port * rc_get_port(struct riscom_board const * bp,
- unsigned char const * what)
+static struct riscom_port *rc_get_port(struct riscom_board const *bp,
+ unsigned char const *what)
{
unsigned char channel;
- struct riscom_port * port;
-
+ struct riscom_port *port;
+
channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
if (channel < CD180_NCH) {
port = &rc_port[board_No(bp) * RC_NPORT + channel];
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED)
return port;
- }
}
- printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
+ printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
board_No(bp), what, channel);
return NULL;
}
-static inline void rc_receive_exc(struct riscom_board const * bp)
+static void rc_receive_exc(struct riscom_board const *bp)
{
struct riscom_port *port;
struct tty_struct *tty;
unsigned char status;
unsigned char ch, flag;
-
- if (!(port = rc_get_port(bp, "Receive")))
+
+ port = rc_get_port(bp, "Receive");
+ if (port == NULL)
return;
tty = port->tty;
-
-#ifdef RC_REPORT_OVERRUN
+
+#ifdef RC_REPORT_OVERRUN
status = rc_in(bp, CD180_RCSR);
if (status & RCSR_OE)
port->overrun++;
status &= port->mark_mask;
-#else
+#else
status = rc_in(bp, CD180_RCSR) & port->mark_mask;
-#endif
+#endif
ch = rc_in(bp, CD180_RDR);
- if (!status) {
+ if (!status)
return;
- }
if (status & RCSR_TOUT) {
printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
- "Hardware problems ?\n",
+ "Hardware problems ?\n",
board_No(bp), port_No(port));
return;
-
+
} else if (status & RCSR_BREAK) {
printk(KERN_INFO "rc%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
flag = TTY_BREAK;
if (port->flags & ASYNC_SAK)
do_SAK(tty);
-
- } else if (status & RCSR_PE)
+
+ } else if (status & RCSR_PE)
flag = TTY_PARITY;
-
- else if (status & RCSR_FE)
+
+ else if (status & RCSR_FE)
flag = TTY_FRAME;
-
- else if (status & RCSR_OE)
+
+ else if (status & RCSR_OE)
flag = TTY_OVERRUN;
-
else
flag = TTY_NORMAL;
-
+
tty_insert_flip_char(tty, ch, flag);
tty_flip_buffer_push(tty);
}
-static inline void rc_receive(struct riscom_board const * bp)
+static void rc_receive(struct riscom_board const *bp)
{
struct riscom_port *port;
struct tty_struct *tty;
unsigned char count;
-
- if (!(port = rc_get_port(bp, "Receive")))
+
+ port = rc_get_port(bp, "Receive");
+ if (port == NULL)
return;
-
+
tty = port->tty;
-
+
count = rc_in(bp, CD180_RDCR);
-
+
#ifdef RC_REPORT_FIFO
port->hits[count > 8 ? 9 : count]++;
-#endif
-
+#endif
+
while (count--) {
if (tty_buffer_request_room(tty, 1) == 0) {
printk(KERN_WARNING "rc%d: port %d: Working around "
@@ -412,26 +412,26 @@ static inline void rc_receive(struct riscom_board const * bp)
tty_flip_buffer_push(tty);
}
-static inline void rc_transmit(struct riscom_board const * bp)
+static void rc_transmit(struct riscom_board const *bp)
{
struct riscom_port *port;
struct tty_struct *tty;
unsigned char count;
-
-
- if (!(port = rc_get_port(bp, "Transmit")))
+
+ port = rc_get_port(bp, "Transmit");
+ if (port == NULL)
return;
-
+
tty = port->tty;
-
- if (port->IER & IER_TXEMPTY) {
+
+ if (port->IER & IER_TXEMPTY) {
/* FIFO drained */
rc_out(bp, CD180_CAR, port_No(port));
port->IER &= ~IER_TXEMPTY;
rc_out(bp, CD180_IER, port->IER);
return;
}
-
+
if ((port->xmit_cnt <= 0 && !port->break_length)
|| tty->stopped || tty->hw_stopped) {
rc_out(bp, CD180_CAR, port_No(port));
@@ -439,7 +439,7 @@ static inline void rc_transmit(struct riscom_board const * bp)
rc_out(bp, CD180_IER, port->IER);
return;
}
-
+
if (port->break_length) {
if (port->break_length > 0) {
if (port->COR2 & COR2_ETC) {
@@ -451,7 +451,8 @@ static inline void rc_transmit(struct riscom_board const * bp)
rc_out(bp, CD180_TDR, CD180_C_ESC);
rc_out(bp, CD180_TDR, CD180_C_DELAY);
rc_out(bp, CD180_TDR, count);
- if (!(port->break_length -= count))
+ port->break_length -= count;
+ if (port->break_length == 0)
port->break_length--;
} else {
rc_out(bp, CD180_TDR, CD180_C_ESC);
@@ -463,7 +464,7 @@ static inline void rc_transmit(struct riscom_board const * bp)
}
return;
}
-
+
count = CD180_NFIFO;
do {
rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]);
@@ -471,7 +472,7 @@ static inline void rc_transmit(struct riscom_board const * bp)
if (--port->xmit_cnt <= 0)
break;
} while (--count > 0);
-
+
if (port->xmit_cnt <= 0) {
rc_out(bp, CD180_CAR, port_No(port));
port->IER &= ~IER_TXRDY;
@@ -481,25 +482,26 @@ static inline void rc_transmit(struct riscom_board const * bp)
tty_wakeup(tty);
}
-static inline void rc_check_modem(struct riscom_board const * bp)
+static void rc_check_modem(struct riscom_board const *bp)
{
struct riscom_port *port;
struct tty_struct *tty;
unsigned char mcr;
-
- if (!(port = rc_get_port(bp, "Modem")))
+
+ port = rc_get_port(bp, "Modem");
+ if (port == NULL)
return;
-
+
tty = port->tty;
-
+
mcr = rc_in(bp, CD180_MCR);
- if (mcr & MCR_CDCHG) {
- if (rc_in(bp, CD180_MSVR) & MSVR_CD)
+ if (mcr & MCR_CDCHG) {
+ if (rc_in(bp, CD180_MSVR) & MSVR_CD)
wake_up_interruptible(&port->open_wait);
else
tty_hangup(tty);
}
-
+
#ifdef RISCOM_BRAIN_DAMAGED_CTS
if (mcr & MCR_CTSCHG) {
if (rc_in(bp, CD180_MSVR) & MSVR_CTS) {
@@ -526,13 +528,13 @@ static inline void rc_check_modem(struct riscom_board const * bp)
rc_out(bp, CD180_IER, port->IER);
}
#endif /* RISCOM_BRAIN_DAMAGED_CTS */
-
+
/* Clear change bits */
rc_out(bp, CD180_MCR, 0);
}
/* The main interrupt processing routine */
-static irqreturn_t rc_interrupt(int dummy, void * dev_id)
+static irqreturn_t rc_interrupt(int dummy, void *dev_id)
{
unsigned char status;
unsigned char ack;
@@ -547,13 +549,11 @@ static irqreturn_t rc_interrupt(int dummy, void * dev_id)
(RC_BSR_TOUT | RC_BSR_TINT |
RC_BSR_MINT | RC_BSR_RINT))) {
handled = 1;
- if (status & RC_BSR_TOUT)
+ if (status & RC_BSR_TOUT)
printk(KERN_WARNING "rc%d: Got timeout. Hardware "
"error?\n", board_No(bp));
-
else if (status & RC_BSR_RINT) {
ack = rc_in(bp, RC_ACK_RINT);
-
if (ack == (RC_ID | GIVR_IT_RCV))
rc_receive(bp);
else if (ack == (RC_ID | GIVR_IT_REXC))
@@ -562,29 +562,23 @@ static irqreturn_t rc_interrupt(int dummy, void * dev_id)
printk(KERN_WARNING "rc%d: Bad receive ack "
"0x%02x.\n",
board_No(bp), ack);
-
} else if (status & RC_BSR_TINT) {
ack = rc_in(bp, RC_ACK_TINT);
-
if (ack == (RC_ID | GIVR_IT_TX))
rc_transmit(bp);
else
printk(KERN_WARNING "rc%d: Bad transmit ack "
"0x%02x.\n",
board_No(bp), ack);
-
} else /* if (status & RC_BSR_MINT) */ {
ack = rc_in(bp, RC_ACK_MINT);
-
- if (ack == (RC_ID | GIVR_IT_MODEM))
+ if (ack == (RC_ID | GIVR_IT_MODEM))
rc_check_modem(bp);
else
printk(KERN_WARNING "rc%d: Bad modem ack "
"0x%02x.\n",
board_No(bp), ack);
-
- }
-
+ }
rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */
rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */
}
@@ -596,24 +590,24 @@ static irqreturn_t rc_interrupt(int dummy, void * dev_id)
*/
/* Called with disabled interrupts */
-static int rc_setup_board(struct riscom_board * bp)
+static int rc_setup_board(struct riscom_board *bp)
{
int error;
- if (bp->flags & RC_BOARD_ACTIVE)
+ if (bp->flags & RC_BOARD_ACTIVE)
return 0;
-
+
error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
"RISCom/8", bp);
- if (error)
+ if (error)
return error;
-
+
rc_out(bp, RC_CTOUT, 0); /* Just in case */
bp->DTR = ~0;
rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
-
+
bp->flags |= RC_BOARD_ACTIVE;
-
+
return 0;
}
@@ -622,40 +616,40 @@ static void rc_shutdown_board(struct riscom_board *bp)
{
if (!(bp->flags & RC_BOARD_ACTIVE))
return;
-
+
bp->flags &= ~RC_BOARD_ACTIVE;
-
+
free_irq(bp->irq, NULL);
-
+
bp->DTR = ~0;
rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
-
+
}
/*
- * Setting up port characteristics.
+ * Setting up port characteristics.
* Must be called with disabled interrupts
*/
static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
{
- struct tty_struct *tty;
+ struct tty_struct *tty = port->tty;
unsigned long baud;
long tmp;
unsigned char cor1 = 0, cor3 = 0;
unsigned char mcor1 = 0, mcor2 = 0;
-
- if (!(tty = port->tty) || !tty->termios)
+
+ if (tty == NULL || tty->termios == NULL)
return;
port->IER = 0;
port->COR2 = 0;
port->MSVR = MSVR_RTS;
-
+
baud = tty_get_baud_rate(tty);
-
+
/* Select port on the board */
rc_out(bp, CD180_CAR, port_No(port));
-
+
if (!baud) {
/* Drop DTR & exit */
bp->DTR |= (1u << port_No(port));
@@ -666,69 +660,68 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
bp->DTR &= ~(1u << port_No(port));
rc_out(bp, RC_DTR, bp->DTR);
}
-
+
/*
- * Now we must calculate some speed depended things
+ * Now we must calculate some speed depended things
*/
-
+
/* Set baud rate for port */
tmp = (((RC_OSCFREQ + baud/2) / baud +
CD180_TPC/2) / CD180_TPC);
- rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
- rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
- rc_out(bp, CD180_RBPRL, tmp & 0xff);
+ rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
+ rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
+ rc_out(bp, CD180_RBPRL, tmp & 0xff);
rc_out(bp, CD180_TBPRL, tmp & 0xff);
-
+
baud = (baud + 5) / 10; /* Estimated CPS */
-
+
/* Two timer ticks seems enough to wakeup something like SLIP driver */
- tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
+ tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
SERIAL_XMIT_SIZE - 1 : tmp);
-
+
/* Receiver timeout will be transmission time for 1.5 chars */
tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
tmp = (tmp > 0xff) ? 0xff : tmp;
rc_out(bp, CD180_RTPR, tmp);
-
- switch (C_CSIZE(tty)) {
- case CS5:
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
cor1 |= COR1_5BITS;
break;
- case CS6:
+ case CS6:
cor1 |= COR1_6BITS;
break;
- case CS7:
+ case CS7:
cor1 |= COR1_7BITS;
break;
- case CS8:
+ case CS8:
cor1 |= COR1_8BITS;
break;
}
-
- if (C_CSTOPB(tty))
+ if (C_CSTOPB(tty))
cor1 |= COR1_2SB;
-
+
cor1 |= COR1_IGNORE;
- if (C_PARENB(tty)) {
+ if (C_PARENB(tty)) {
cor1 |= COR1_NORMPAR;
- if (C_PARODD(tty))
+ if (C_PARODD(tty))
cor1 |= COR1_ODDP;
- if (I_INPCK(tty))
+ if (I_INPCK(tty))
cor1 &= ~COR1_IGNORE;
}
/* Set marking of some errors */
port->mark_mask = RCSR_OE | RCSR_TOUT;
- if (I_INPCK(tty))
+ if (I_INPCK(tty))
port->mark_mask |= RCSR_FE | RCSR_PE;
- if (I_BRKINT(tty) || I_PARMRK(tty))
+ if (I_BRKINT(tty) || I_PARMRK(tty))
port->mark_mask |= RCSR_BREAK;
- if (I_IGNPAR(tty))
+ if (I_IGNPAR(tty))
port->mark_mask &= ~(RCSR_FE | RCSR_PE);
- if (I_IGNBRK(tty)) {
+ if (I_IGNBRK(tty)) {
port->mark_mask &= ~RCSR_BREAK;
- if (I_IGNPAR(tty))
+ if (I_IGNPAR(tty))
/* Real raw mode. Ignore all */
port->mark_mask &= ~RCSR_OE;
}
@@ -738,7 +731,8 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
port->IER |= IER_DSR | IER_CTS;
mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
- tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR));
+ tty->hw_stopped = !(rc_in(bp, CD180_MSVR) &
+ (MSVR_CTS|MSVR_DSR));
#else
port->COR2 |= COR2_CTSAE;
#endif
@@ -761,13 +755,13 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
mcor1 |= MCOR1_CDZD;
mcor2 |= MCOR2_CDOD;
}
-
- if (C_CREAD(tty))
+
+ if (C_CREAD(tty))
/* Enable receiver */
port->IER |= IER_RXD;
-
+
/* Set input FIFO size (1-8 bytes) */
- cor3 |= RISCOM_RXFIFO;
+ cor3 |= RISCOM_RXFIFO;
/* Setting up CD180 channel registers */
rc_out(bp, CD180_COR1, cor1);
rc_out(bp, CD180_COR2, port->COR2);
@@ -791,36 +785,30 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
{
unsigned long flags;
-
+
if (port->flags & ASYNC_INITIALIZED)
return 0;
-
+
if (!port->xmit_buf) {
/* We may sleep in get_zeroed_page() */
- unsigned long tmp;
-
- if (!(tmp = get_zeroed_page(GFP_KERNEL)))
+ unsigned long tmp = get_zeroed_page(GFP_KERNEL);
+ if (tmp == 0)
return -ENOMEM;
-
- if (port->xmit_buf) {
+ if (port->xmit_buf)
free_page(tmp);
- return -ERESTARTSYS;
- }
- port->xmit_buf = (unsigned char *) tmp;
+ else
+ port->xmit_buf = (unsigned char *) tmp;
}
-
spin_lock_irqsave(&riscom_lock, flags);
- if (port->tty)
+ if (port->tty)
clear_bit(TTY_IO_ERROR, &port->tty->flags);
-
- if (port->count == 1)
+ if (port->count == 1)
bp->count++;
-
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
rc_change_speed(bp, port);
port->flags |= ASYNC_INITIALIZED;
-
+
spin_unlock_irqrestore(&riscom_lock, flags);
return 0;
}
@@ -829,38 +817,39 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
{
struct tty_struct *tty;
-
- if (!(port->flags & ASYNC_INITIALIZED))
+
+ if (!(port->flags & ASYNC_INITIALIZED))
return;
-
+
#ifdef RC_REPORT_OVERRUN
printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
board_No(bp), port_No(port), port->overrun);
-#endif
+#endif
#ifdef RC_REPORT_FIFO
{
int i;
-
+
printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
board_No(bp), port_No(port));
- for (i = 0; i < 10; i++) {
+ for (i = 0; i < 10; i++)
printk("%ld ", port->hits[i]);
- }
printk("].\n");
}
-#endif
+#endif
if (port->xmit_buf) {
free_page((unsigned long) port->xmit_buf);
port->xmit_buf = NULL;
}
- if (!(tty = port->tty) || C_HUPCL(tty)) {
+ tty = port->tty;
+
+ if (tty == NULL || C_HUPCL(tty)) {
/* Drop DTR */
bp->DTR |= (1u << port_No(port));
rc_out(bp, RC_DTR, bp->DTR);
}
-
- /* Select port */
+
+ /* Select port */
rc_out(bp, CD180_CAR, port_No(port));
/* Reset port */
rc_wait_CCR(bp);
@@ -868,28 +857,26 @@ static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
/* Disable all interrupts from this port */
port->IER = 0;
rc_out(bp, CD180_IER, port->IER);
-
- if (tty)
+
+ if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
port->flags &= ~ASYNC_INITIALIZED;
-
+
if (--bp->count < 0) {
printk(KERN_INFO "rc%d: rc_shutdown_port: "
"bad board count: %d\n",
board_No(bp), bp->count);
bp->count = 0;
}
-
/*
* If this is the last opened port on the board
* shutdown whole board
*/
- if (!bp->count)
+ if (!bp->count)
rc_shutdown_board(bp);
}
-
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
struct riscom_port *port)
{
DECLARE_WAITQUEUE(wait, current);
@@ -921,7 +908,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
return 0;
}
- if (C_CLOCAL(tty))
+ if (C_CLOCAL(tty))
do_clocal = 1;
/*
@@ -959,7 +946,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
- retval = -ERESTARTSYS;
+ retval = -ERESTARTSYS;
break;
}
if (!(port->flags & ASYNC_CLOSING) &&
@@ -978,50 +965,63 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
port->blocked_open--;
if (retval)
return retval;
-
+
port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
-}
+}
-static int rc_open(struct tty_struct * tty, struct file * filp)
+static int rc_open(struct tty_struct *tty, struct file *filp)
{
int board;
int error;
- struct riscom_port * port;
- struct riscom_board * bp;
-
+ struct riscom_port *port;
+ struct riscom_board *bp;
+
board = RC_BOARD(tty->index);
if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
return -ENODEV;
-
+
bp = &rc_board[board];
port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
if (rc_paranoia_check(port, tty->name, "rc_open"))
return -ENODEV;
-
- if ((error = rc_setup_board(bp)))
+
+ error = rc_setup_board(bp);
+ if (error)
return error;
-
+
port->count++;
tty->driver_data = port;
port->tty = tty;
-
- if ((error = rc_setup_port(bp, port)))
- return error;
-
- if ((error = block_til_ready(tty, filp, port)))
- return error;
-
- return 0;
+
+ error = rc_setup_port(bp, port);
+ if (error == 0)
+ error = block_til_ready(tty, filp, port);
+ return error;
}
-static void rc_close(struct tty_struct * tty, struct file * filp)
+static void rc_flush_buffer(struct tty_struct *tty)
+{
+ struct riscom_port *port = (struct riscom_port *)tty->driver_data;
+ unsigned long flags;
+
+ if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
+ return;
+
+ spin_lock_irqsave(&riscom_lock, flags);
+ port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+ spin_unlock_irqrestore(&riscom_lock, flags);
+
+ tty_wakeup(tty);
+}
+
+static void rc_close(struct tty_struct *tty, struct file *filp)
{
struct riscom_port *port = (struct riscom_port *) tty->driver_data;
struct riscom_board *bp;
unsigned long flags;
unsigned long timeout;
-
+
if (!port || rc_paranoia_check(port, tty->name, "close"))
return;
@@ -1029,7 +1029,7 @@ static void rc_close(struct tty_struct * tty, struct file * filp)
if (tty_hung_up_p(filp))
goto out;
-
+
bp = port_Board(port);
if ((tty->count == 1) && (port->count != 1)) {
printk(KERN_INFO "rc%d: rc_close: bad port count;"
@@ -1047,7 +1047,7 @@ static void rc_close(struct tty_struct * tty, struct file * filp)
goto out;
port->flags |= ASYNC_CLOSING;
/*
- * Now we wait for the transmit buffer to clear; and we notify
+ * Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
@@ -1070,24 +1070,22 @@ static void rc_close(struct tty_struct * tty, struct file * filp)
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
- timeout = jiffies+HZ;
- while(port->IER & IER_TXEMPTY) {
+ timeout = jiffies + HZ;
+ while (port->IER & IER_TXEMPTY) {
msleep_interruptible(jiffies_to_msecs(port->timeout));
if (time_after(jiffies, timeout))
break;
}
}
rc_shutdown_port(bp, port);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ rc_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
port->tty = NULL;
if (port->blocked_open) {
- if (port->close_delay) {
+ if (port->close_delay)
msleep_interruptible(jiffies_to_msecs(port->close_delay));
- }
wake_up_interruptible(&port->open_wait);
}
port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@@ -1097,17 +1095,17 @@ out:
spin_unlock_irqrestore(&riscom_lock, flags);
}
-static int rc_write(struct tty_struct * tty,
+static int rc_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
struct riscom_board *bp;
int c, total = 0;
unsigned long flags;
-
+
if (rc_paranoia_check(port, tty->name, "rc_write"))
return 0;
-
+
bp = port_Board(port);
if (!tty || !port->xmit_buf)
@@ -1144,38 +1142,41 @@ static int rc_write(struct tty_struct * tty,
return total;
}
-static void rc_put_char(struct tty_struct * tty, unsigned char ch)
+static int rc_put_char(struct tty_struct *tty, unsigned char ch)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
unsigned long flags;
+ int ret = 0;
if (rc_paranoia_check(port, tty->name, "rc_put_char"))
- return;
+ return 0;
if (!tty || !port->xmit_buf)
- return;
+ return 0;
spin_lock_irqsave(&riscom_lock, flags);
-
+
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
goto out;
port->xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= SERIAL_XMIT_SIZE - 1;
port->xmit_cnt++;
+ ret = 1;
out:
spin_unlock_irqrestore(&riscom_lock, flags);
+ return ret;
}
-static void rc_flush_chars(struct tty_struct * tty)
+static void rc_flush_chars(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
unsigned long flags;
-
+
if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
return;
-
+
if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
!port->xmit_buf)
return;
@@ -1189,11 +1190,11 @@ static void rc_flush_chars(struct tty_struct * tty)
spin_unlock_irqrestore(&riscom_lock, flags);
}
-static int rc_write_room(struct tty_struct * tty)
+static int rc_write_room(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
int ret;
-
+
if (rc_paranoia_check(port, tty->name, "rc_write_room"))
return 0;
@@ -1206,39 +1207,22 @@ static int rc_write_room(struct tty_struct * tty)
static int rc_chars_in_buffer(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
-
+
if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
return 0;
-
- return port->xmit_cnt;
-}
-
-static void rc_flush_buffer(struct tty_struct *tty)
-{
- struct riscom_port *port = (struct riscom_port *)tty->driver_data;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
- return;
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&riscom_lock, flags);
-
- tty_wakeup(tty);
+ return port->xmit_cnt;
}
static int rc_tiocmget(struct tty_struct *tty, struct file *file)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
- struct riscom_board * bp;
+ struct riscom_board *bp;
unsigned char status;
unsigned int result;
unsigned long flags;
- if (rc_paranoia_check(port, tty->name, __FUNCTION__))
+ if (rc_paranoia_check(port, tty->name, __func__))
return -ENODEV;
bp = port_Board(port);
@@ -1266,7 +1250,7 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file,
unsigned long flags;
struct riscom_board *bp;
- if (rc_paranoia_check(port, tty->name, __FUNCTION__))
+ if (rc_paranoia_check(port, tty->name, __func__))
return -ENODEV;
bp = port_Board(port);
@@ -1292,11 +1276,11 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static inline void rc_send_break(struct riscom_port * port, unsigned long length)
+static void rc_send_break(struct riscom_port *port, unsigned long length)
{
struct riscom_board *bp = port_Board(port);
unsigned long flags;
-
+
spin_lock_irqsave(&riscom_lock, flags);
port->break_length = RISCOM_TPS / HZ * length;
@@ -1312,17 +1296,17 @@ static inline void rc_send_break(struct riscom_port * port, unsigned long length
spin_unlock_irqrestore(&riscom_lock, flags);
}
-static inline int rc_set_serial_info(struct riscom_port * port,
- struct serial_struct __user * newinfo)
+static int rc_set_serial_info(struct riscom_port *port,
+ struct serial_struct __user *newinfo)
{
struct serial_struct tmp;
struct riscom_board *bp = port_Board(port);
int change_speed;
-
+
if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
return -EFAULT;
-
-#if 0
+
+#if 0
if ((tmp.irq != bp->irq) ||
(tmp.port != bp->base) ||
(tmp.type != PORT_CIRRUS) ||
@@ -1331,16 +1315,16 @@ static inline int rc_set_serial_info(struct riscom_port * port,
(tmp.xmit_fifo_size != CD180_NFIFO) ||
(tmp.flags & ~RISCOM_LEGAL_FLAGS))
return -EINVAL;
-#endif
-
+#endif
+
change_speed = ((port->flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
-
+
if (!capable(CAP_SYS_ADMIN)) {
if ((tmp.close_delay != port->close_delay) ||
(tmp.closing_wait != port->closing_wait) ||
((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->flags & ~ASYNC_USR_MASK)))
return -EPERM;
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
(tmp.flags & ASYNC_USR_MASK));
@@ -1360,12 +1344,12 @@ static inline int rc_set_serial_info(struct riscom_port * port,
return 0;
}
-static inline int rc_get_serial_info(struct riscom_port * port,
+static int rc_get_serial_info(struct riscom_port *port,
struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
struct riscom_board *bp = port_Board(port);
-
+
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_CIRRUS;
tmp.line = port - rc_port;
@@ -1379,19 +1363,18 @@ static inline int rc_get_serial_info(struct riscom_port * port,
return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
-static int rc_ioctl(struct tty_struct * tty, struct file * filp,
+static int rc_ioctl(struct tty_struct *tty, struct file *filp,
unsigned int cmd, unsigned long arg)
-
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
void __user *argp = (void __user *)arg;
- int retval;
-
+ int retval = 0;
+
if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
return -ENODEV;
-
+
switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
return retval;
@@ -1399,45 +1382,40 @@ static int rc_ioctl(struct tty_struct * tty, struct file * filp,
if (!arg)
rc_send_break(port, HZ/4); /* 1/4 second */
break;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
rc_send_break(port, arg ? arg*(HZ/10) : HZ/4);
break;
- case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned __user *)argp);
- case TIOCSSOFTCAR:
- if (get_user(arg,(unsigned __user *) argp))
- return -EFAULT;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
+ case TIOCGSERIAL:
+ lock_kernel();
+ retval = rc_get_serial_info(port, argp);
+ unlock_kernel();
break;
- case TIOCGSERIAL:
- return rc_get_serial_info(port, argp);
- case TIOCSSERIAL:
- return rc_set_serial_info(port, argp);
- default:
- return -ENOIOCTLCMD;
+ case TIOCSSERIAL:
+ lock_kernel();
+ retval = rc_set_serial_info(port, argp);
+ unlock_kernel();
+ break;
+ default:
+ retval = -ENOIOCTLCMD;
}
- return 0;
+ return retval;
}
-static void rc_throttle(struct tty_struct * tty)
+static void rc_throttle(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
struct riscom_board *bp;
unsigned long flags;
-
+
if (rc_paranoia_check(port, tty->name, "rc_throttle"))
return;
-
bp = port_Board(port);
spin_lock_irqsave(&riscom_lock, flags);
-
port->MSVR &= ~MSVR_RTS;
rc_out(bp, CD180_CAR, port_No(port));
if (I_IXOFF(tty)) {
@@ -1446,23 +1424,20 @@ static void rc_throttle(struct tty_struct * tty)
rc_wait_CCR(bp);
}
rc_out(bp, CD180_MSVR, port->MSVR);
-
spin_unlock_irqrestore(&riscom_lock, flags);
}
-static void rc_unthrottle(struct tty_struct * tty)
+static void rc_unthrottle(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
struct riscom_board *bp;
unsigned long flags;
-
+
if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
return;
-
bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
+ spin_lock_irqsave(&riscom_lock, flags);
port->MSVR |= MSVR_RTS;
rc_out(bp, CD180_CAR, port_No(port));
if (I_IXOFF(tty)) {
@@ -1471,62 +1446,58 @@ static void rc_unthrottle(struct tty_struct * tty)
rc_wait_CCR(bp);
}
rc_out(bp, CD180_MSVR, port->MSVR);
-
spin_unlock_irqrestore(&riscom_lock, flags);
}
-static void rc_stop(struct tty_struct * tty)
+static void rc_stop(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
struct riscom_board *bp;
unsigned long flags;
-
+
if (rc_paranoia_check(port, tty->name, "rc_stop"))
return;
-
+
bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
+ spin_lock_irqsave(&riscom_lock, flags);
port->IER &= ~IER_TXRDY;
rc_out(bp, CD180_CAR, port_No(port));
rc_out(bp, CD180_IER, port->IER);
-
spin_unlock_irqrestore(&riscom_lock, flags);
}
-static void rc_start(struct tty_struct * tty)
+static void rc_start(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
struct riscom_board *bp;
unsigned long flags;
-
+
if (rc_paranoia_check(port, tty->name, "rc_start"))
return;
-
+
bp = port_Board(port);
-
+
spin_lock_irqsave(&riscom_lock, flags);
- if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
+ if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
rc_out(bp, CD180_CAR, port_No(port));
rc_out(bp, CD180_IER, port->IER);
}
-
spin_unlock_irqrestore(&riscom_lock, flags);
}
-static void rc_hangup(struct tty_struct * tty)
+static void rc_hangup(struct tty_struct *tty)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
struct riscom_board *bp;
-
+
if (rc_paranoia_check(port, tty->name, "rc_hangup"))
return;
-
+
bp = port_Board(port);
-
+
rc_shutdown_port(bp, port);
port->count = 0;
port->flags &= ~ASYNC_NORMAL_ACTIVE;
@@ -1534,17 +1505,14 @@ static void rc_hangup(struct tty_struct * tty)
wake_up_interruptible(&port->open_wait);
}
-static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
+static void rc_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
unsigned long flags;
-
+
if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
return;
-
- if (tty->termios->c_cflag == old_termios->c_cflag &&
- tty->termios->c_iflag == old_termios->c_iflag)
- return;
spin_lock_irqsave(&riscom_lock, flags);
rc_change_speed(port_Board(port), port);
@@ -1583,9 +1551,9 @@ static int __init rc_init_drivers(void)
int i;
riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
- if (!riscom_driver)
+ if (!riscom_driver)
return -ENOMEM;
-
+
riscom_driver->owner = THIS_MODULE;
riscom_driver->name = "ttyL";
riscom_driver->major = RISCOM8_NORMAL_MAJOR;
@@ -1598,23 +1566,21 @@ static int __init rc_init_drivers(void)
riscom_driver->init_termios.c_ospeed = 9600;
riscom_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(riscom_driver, &riscom_ops);
- if ((error = tty_register_driver(riscom_driver))) {
+ error = tty_register_driver(riscom_driver);
+ if (error != 0) {
put_tty_driver(riscom_driver);
printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
- "error = %d\n",
- error);
+ "error = %d\n", error);
return 1;
}
-
memset(rc_port, 0, sizeof(rc_port));
for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
rc_port[i].magic = RISCOM8_MAGIC;
- rc_port[i].close_delay = 50 * HZ/100;
- rc_port[i].closing_wait = 3000 * HZ/100;
+ rc_port[i].close_delay = 50 * HZ / 100;
+ rc_port[i].closing_wait = 3000 * HZ / 100;
init_waitqueue_head(&rc_port[i].open_wait);
init_waitqueue_head(&rc_port[i].close_wait);
}
-
return 0;
}
@@ -1627,13 +1593,13 @@ static void rc_release_drivers(void)
#ifndef MODULE
/*
* Called at boot time.
- *
+ *
* You can specify IO base for up to RC_NBOARD cards,
* using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
* Note that there will be no probing at default
* addresses in this case.
*
- */
+ */
static int __init riscom8_setup(char *str)
{
int ints[RC_NBOARD];
@@ -1644,7 +1610,7 @@ static int __init riscom8_setup(char *str)
for (i = 0; i < RC_NBOARD; i++) {
if (i < ints[0])
rc_board[i].base = ints[i+1];
- else
+ else
rc_board[i].base = 0;
}
return 1;
@@ -1659,8 +1625,8 @@ static char banner[] __initdata =
static char no_boards_msg[] __initdata =
KERN_INFO "rc: No RISCom/8 boards detected.\n";
-/*
- * This routine must be called by kernel at boot time
+/*
+ * This routine must be called by kernel at boot time
*/
static int __init riscom8_init(void)
{
@@ -1669,13 +1635,12 @@ static int __init riscom8_init(void)
printk(banner);
- if (rc_init_drivers())
+ if (rc_init_drivers())
return -EIO;
- for (i = 0; i < RC_NBOARD; i++)
- if (rc_board[i].base && !rc_probe(&rc_board[i]))
+ for (i = 0; i < RC_NBOARD; i++)
+ if (rc_board[i].base && !rc_probe(&rc_board[i]))
found++;
-
if (!found) {
rc_release_drivers();
printk(no_boards_msg);
@@ -1702,13 +1667,13 @@ MODULE_LICENSE("GPL");
* by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
*
*/
-static int __init riscom8_init_module (void)
+static int __init riscom8_init_module(void)
{
#ifdef MODULE
int i;
if (iobase || iobase1 || iobase2 || iobase3) {
- for(i = 0; i < RC_NBOARD; i++)
+ for (i = 0; i < RC_NBOARD; i++)
rc_board[i].base = 0;
}
@@ -1724,18 +1689,17 @@ static int __init riscom8_init_module (void)
return riscom8_init();
}
-
-static void __exit riscom8_exit_module (void)
+
+static void __exit riscom8_exit_module(void)
{
int i;
-
+
rc_release_drivers();
- for (i = 0; i < RC_NBOARD; i++)
- if (rc_board[i].flags & RC_BOARD_PRESENT)
+ for (i = 0; i < RC_NBOARD; i++)
+ if (rc_board[i].flags & RC_BOARD_PRESENT)
rc_release_io_range(&rc_board[i]);
-
+
}
module_init(riscom8_init_module);
module_exit(riscom8_exit_module);
-
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index f585bc8579e..743dc80a932 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -449,7 +449,8 @@ static void rp_do_transmit(struct r_port *info)
while (1) {
if (tty->stopped || tty->hw_stopped)
break;
- c = min(info->xmit_fifo_room, min(info->xmit_cnt, XMIT_BUF_SIZE - info->xmit_tail));
+ c = min(info->xmit_fifo_room, info->xmit_cnt);
+ c = min(c, XMIT_BUF_SIZE - info->xmit_tail);
if (c <= 0 || info->xmit_fifo_room <= 0)
break;
sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
@@ -1433,29 +1434,38 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
{
struct r_port *info = (struct r_port *) tty->driver_data;
void __user *argp = (void __user *)arg;
+ int ret = 0;
if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
return -ENXIO;
+ lock_kernel();
+
switch (cmd) {
case RCKP_GET_STRUCT:
if (copy_to_user(argp, info, sizeof (struct r_port)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ break;
case RCKP_GET_CONFIG:
- return get_config(info, argp);
+ ret = get_config(info, argp);
+ break;
case RCKP_SET_CONFIG:
- return set_config(info, argp);
+ ret = set_config(info, argp);
+ break;
case RCKP_GET_PORTS:
- return get_ports(info, argp);
+ ret = get_ports(info, argp);
+ break;
case RCKP_RESET_RM2:
- return reset_rm2(info, argp);
+ ret = reset_rm2(info, argp);
+ break;
case RCKP_GET_VERSION:
- return get_version(info, argp);
+ ret = get_version(info, argp);
+ break;
default:
- return -ENOIOCTLCMD;
+ ret = -ENOIOCTLCMD;
}
- return 0;
+ unlock_kernel();
+ return ret;
}
static void rp_send_xchar(struct tty_struct *tty, char ch)
@@ -1575,6 +1585,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
jiffies);
printk(KERN_INFO "cps=%d...\n", info->cps);
#endif
+ lock_kernel();
while (1) {
txcnt = sGetTxCnt(cp);
if (!txcnt) {
@@ -1602,6 +1613,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
__set_current_state(TASK_RUNNING);
+ unlock_kernel();
#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
#endif
@@ -1651,14 +1663,14 @@ static void rp_hangup(struct tty_struct *tty)
* writing routines will write directly to transmit FIFO.
* Write buffer and counters protected by spinlocks
*/
-static void rp_put_char(struct tty_struct *tty, unsigned char ch)
+static int rp_put_char(struct tty_struct *tty, unsigned char ch)
{
struct r_port *info = (struct r_port *) tty->driver_data;
CHANNEL_t *cp;
unsigned long flags;
if (rocket_paranoia_check(info, "rp_put_char"))
- return;
+ return 0;
/*
* Grab the port write mutex, locking out other processes that try to
@@ -1687,6 +1699,7 @@ static void rp_put_char(struct tty_struct *tty, unsigned char ch)
}
spin_unlock_irqrestore(&info->slock, flags);
mutex_unlock(&info->write_mtx);
+ return 1;
}
/*
@@ -1749,10 +1762,10 @@ static int rp_write(struct tty_struct *tty,
/* Write remaining data into the port's xmit_buf */
while (1) {
- if (!info->tty) /* Seemingly obligatory check... */
+ if (!info->tty) /* Seemingly obligatory check... */
goto end;
-
- c = min(count, min(XMIT_BUF_SIZE - info->xmit_cnt - 1, XMIT_BUF_SIZE - info->xmit_head));
+ c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
+ c = min(c, XMIT_BUF_SIZE - info->xmit_head);
if (c <= 0)
break;
diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h
index b01d38125a8..143cc432fdb 100644
--- a/drivers/char/rocket_int.h
+++ b/drivers/char/rocket_int.h
@@ -55,7 +55,7 @@ static inline void sOutW(unsigned short port, unsigned short value)
static inline void out32(unsigned short port, Byte_t *p)
{
- u32 value = le32_to_cpu(get_unaligned((__le32 *)p));
+ u32 value = get_unaligned_le32(p);
#ifdef ROCKET_DEBUG_IO
printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value);
#endif
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index e2ec2ee4cf7..5f80a9dff57 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -1069,10 +1069,8 @@ no_irq:
}
#ifdef CONFIG_PROC_FS
- ent = create_proc_entry("driver/rtc", 0, NULL);
- if (ent)
- ent->proc_fops = &rtc_proc_fops;
- else
+ ent = proc_create("driver/rtc", 0, NULL, &rtc_proc_fops);
+ if (!ent)
printk(KERN_WARNING "rtc: Failed to register with procfs.\n");
#endif
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index df8cd0ca97e..fd2db07a50f 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1060,7 +1060,7 @@ static void config_setup(struct cyclades_port *info)
} /* config_setup */
-static void cy_put_char(struct tty_struct *tty, unsigned char ch)
+static int cy_put_char(struct tty_struct *tty, unsigned char ch)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
unsigned long flags;
@@ -1070,7 +1070,7 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch)
#endif
if (serial_paranoia_check(info, tty->name, "cy_put_char"))
- return;
+ return 0;
if (!info->xmit_buf)
return;
@@ -1078,13 +1078,14 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch)
local_irq_save(flags);
if (info->xmit_cnt >= PAGE_SIZE - 1) {
local_irq_restore(flags);
- return;
+ return 0;
}
info->xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= PAGE_SIZE - 1;
info->xmit_cnt++;
local_irq_restore(flags);
+ return 1;
} /* cy_put_char */
static void cy_flush_chars(struct tty_struct *tty)
@@ -1539,6 +1540,8 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */
#endif
+ lock_kernel();
+
switch (cmd) {
case CYGETMON:
ret_val = get_mon_info(info, argp);
@@ -1584,18 +1587,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
break;
/* The following commands are incompletely implemented!!! */
- case TIOCGSOFTCAR:
- ret_val =
- put_user(C_CLOCAL(tty) ? 1 : 0,
- (unsigned long __user *)argp);
- break;
- case TIOCSSOFTCAR:
- ret_val = get_user(val, (unsigned long __user *)argp);
- if (ret_val)
- break;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) | (val ? CLOCAL : 0));
- break;
case TIOCGSERIAL:
ret_val = get_serial_info(info, argp);
break;
@@ -1605,6 +1596,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
default:
ret_val = -ENOIOCTLCMD;
}
+ unlock_kernel();
#ifdef SERIAL_DEBUG_OTHER
printk("cy_ioctl done\n");
@@ -1683,8 +1675,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
if (info->flags & ASYNC_INITIALIZED)
tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ cy_flush_buffer(tty);
tty_ldisc_flush(tty);
info->tty = NULL;
if (info->blocked_open) {
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index b9c1dba6bd0..8fe099a4106 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -80,7 +80,7 @@ scdrv_open(struct inode *inode, struct file *file)
sd = kzalloc(sizeof (struct subch_data_s), GFP_KERNEL);
if (sd == NULL) {
printk("%s: couldn't allocate subchannel data\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
@@ -90,7 +90,7 @@ scdrv_open(struct inode *inode, struct file *file)
if (sd->sd_subch < 0) {
kfree(sd);
- printk("%s: couldn't allocate subchannel\n", __FUNCTION__);
+ printk("%s: couldn't allocate subchannel\n", __func__);
return -EBUSY;
}
@@ -110,7 +110,7 @@ scdrv_open(struct inode *inode, struct file *file)
if (rv) {
ia64_sn_irtr_close(sd->sd_nasid, sd->sd_subch);
kfree(sd);
- printk("%s: irq request failed (%d)\n", __FUNCTION__, rv);
+ printk("%s: irq request failed (%d)\n", __func__, rv);
return -EBUSY;
}
@@ -215,7 +215,7 @@ scdrv_read(struct file *file, char __user *buf, size_t count, loff_t *f_pos)
*/
if (count < len) {
pr_debug("%s: only accepting %d of %d bytes\n",
- __FUNCTION__, (int) count, len);
+ __func__, (int) count, len);
}
len = min((int) count, len);
if (copy_to_user(buf, sd->sd_rb, len))
@@ -384,7 +384,7 @@ scdrv_init(void)
if (alloc_chrdev_region(&first_dev, 0, num_cnodes,
SYSCTL_BASENAME) < 0) {
printk("%s: failed to register SN system controller device\n",
- __FUNCTION__);
+ __func__);
return -ENODEV;
}
snsc_class = class_create(THIS_MODULE, SYSCTL_BASENAME);
@@ -403,7 +403,7 @@ scdrv_init(void)
GFP_KERNEL);
if (!scd) {
printk("%s: failed to allocate device info"
- "for %s/%s\n", __FUNCTION__,
+ "for %s/%s\n", __func__,
SYSCTL_BASENAME, devname);
continue;
}
@@ -412,7 +412,7 @@ scdrv_init(void)
scd->scd_nasid = cnodeid_to_nasid(cnode);
if (!(salbuf = kmalloc(SCDRV_BUFSZ, GFP_KERNEL))) {
printk("%s: failed to allocate driver buffer"
- "(%s%s)\n", __FUNCTION__,
+ "(%s%s)\n", __func__,
SYSCTL_BASENAME, devname);
kfree(scd);
continue;
@@ -424,7 +424,7 @@ scdrv_init(void)
("%s: failed to initialize SAL for"
" system controller communication"
" (%s/%s): outdated PROM?\n",
- __FUNCTION__, SYSCTL_BASENAME, devname);
+ __func__, SYSCTL_BASENAME, devname);
kfree(scd);
kfree(salbuf);
continue;
@@ -435,7 +435,7 @@ scdrv_init(void)
if (cdev_add(&scd->scd_cdev, dev, 1)) {
printk("%s: failed to register system"
" controller device (%s%s)\n",
- __FUNCTION__, SYSCTL_BASENAME, devname);
+ __func__, SYSCTL_BASENAME, devname);
kfree(scd);
kfree(salbuf);
continue;
diff --git a/drivers/char/snsc_event.c b/drivers/char/snsc_event.c
index 1b75b0b7d54..53b3d44f8c0 100644
--- a/drivers/char/snsc_event.c
+++ b/drivers/char/snsc_event.c
@@ -63,16 +63,13 @@ static int
scdrv_parse_event(char *event, int *src, int *code, int *esp_code, char *desc)
{
char *desc_end;
- __be32 from_buf;
/* record event source address */
- from_buf = get_unaligned((__be32 *)event);
- *src = be32_to_cpup(&from_buf);
+ *src = get_unaligned_be32(event);
event += 4; /* move on to event code */
/* record the system controller's event code */
- from_buf = get_unaligned((__be32 *)event);
- *code = be32_to_cpup(&from_buf);
+ *code = get_unaligned_be32(event);
event += 4; /* move on to event arguments */
/* how many arguments are in the packet? */
@@ -86,8 +83,7 @@ scdrv_parse_event(char *event, int *src, int *code, int *esp_code, char *desc)
/* not an integer argument, so give up */
return -1;
}
- from_buf = get_unaligned((__be32 *)event);
- *esp_code = be32_to_cpup(&from_buf);
+ *esp_code = get_unaligned_be32(event);
event += 4;
/* parse out the event description */
@@ -275,7 +271,7 @@ scdrv_event_init(struct sysctl_data_s *scd)
event_sd = kzalloc(sizeof (struct subch_data_s), GFP_KERNEL);
if (event_sd == NULL) {
printk(KERN_WARNING "%s: couldn't allocate subchannel info"
- " for event monitoring\n", __FUNCTION__);
+ " for event monitoring\n", __func__);
return;
}
@@ -289,7 +285,7 @@ scdrv_event_init(struct sysctl_data_s *scd)
if (event_sd->sd_subch < 0) {
kfree(event_sd);
printk(KERN_WARNING "%s: couldn't open event subchannel\n",
- __FUNCTION__);
+ __func__);
return;
}
@@ -299,7 +295,7 @@ scdrv_event_init(struct sysctl_data_s *scd)
"system controller events", event_sd);
if (rv) {
printk(KERN_WARNING "%s: irq request failed (%d)\n",
- __FUNCTION__, rv);
+ __func__, rv);
ia64_sn_irtr_close(event_sd->sd_nasid, event_sd->sd_subch);
kfree(event_sd);
return;
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index c03ad164c39..58533de5902 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -506,7 +506,7 @@ static struct sonypi_device {
while (--n && (command)) \
udelay(1); \
if (!n && (verbose || !quiet)) \
- printk(KERN_WARNING "sonypi command failed at %s : %s (line %d)\n", __FILE__, __FUNCTION__, __LINE__); \
+ printk(KERN_WARNING "sonypi command failed at %s : %s (line %d)\n", __FILE__, __func__, __LINE__); \
}
#ifdef CONFIG_ACPI
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 4b5b5b78acb..2ee4d989375 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -131,8 +131,8 @@ static int sx_rxfifo = SPECIALIX_RXFIFO;
#define SX_DEBUG_FIFO 0x0800
-#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__FUNCTION__)
-#define func_exit() dprintk (SX_DEBUG_FLOW, "io8: exit %s\n", __FUNCTION__)
+#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__func__)
+#define func_exit() dprintk (SX_DEBUG_FLOW, "io8: exit %s\n", __func__)
#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
@@ -874,7 +874,7 @@ static irqreturn_t sx_interrupt(int dummy, void *dev_id)
spin_lock_irqsave(&bp->lock, flags);
- dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __FUNCTION__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
+ dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
if (!(bp->flags & SX_BOARD_ACTIVE)) {
dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", bp->irq);
spin_unlock_irqrestore(&bp->lock, flags);
@@ -1504,6 +1504,27 @@ static int sx_open(struct tty_struct * tty, struct file * filp)
return 0;
}
+static void sx_flush_buffer(struct tty_struct *tty)
+{
+ struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+ unsigned long flags;
+ struct specialix_board * bp;
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
+ func_exit();
+ return;
+ }
+
+ bp = port_Board(port);
+ spin_lock_irqsave(&port->lock, flags);
+ port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_wakeup(tty);
+
+ func_exit();
+}
static void sx_close(struct tty_struct * tty, struct file * filp)
{
@@ -1597,8 +1618,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
}
sx_shutdown_port(bp, port);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ sx_flush_buffer(tty);
tty_ldisc_flush(tty);
spin_lock_irqsave(&port->lock, flags);
tty->closing = 0;
@@ -1670,7 +1690,7 @@ static int sx_write(struct tty_struct * tty,
}
-static void sx_put_char(struct tty_struct * tty, unsigned char ch)
+static int sx_put_char(struct tty_struct * tty, unsigned char ch)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
@@ -1680,12 +1700,12 @@ static void sx_put_char(struct tty_struct * tty, unsigned char ch)
if (sx_paranoia_check(port, tty->name, "sx_put_char")) {
func_exit();
- return;
+ return 0;
}
dprintk (SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
if (!port->xmit_buf) {
func_exit();
- return;
+ return 0;
}
bp = port_Board(port);
spin_lock_irqsave(&port->lock, flags);
@@ -1695,7 +1715,7 @@ static void sx_put_char(struct tty_struct * tty, unsigned char ch)
spin_unlock_irqrestore(&port->lock, flags);
dprintk (SX_DEBUG_TX, "Exit size\n");
func_exit();
- return;
+ return 0;
}
dprintk (SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
port->xmit_buf[port->xmit_head++] = ch;
@@ -1704,6 +1724,7 @@ static void sx_put_char(struct tty_struct * tty, unsigned char ch)
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
+ return 1;
}
@@ -1770,28 +1791,6 @@ static int sx_chars_in_buffer(struct tty_struct *tty)
}
-static void sx_flush_buffer(struct tty_struct *tty)
-{
- struct specialix_port *port = (struct specialix_port *)tty->driver_data;
- unsigned long flags;
- struct specialix_board * bp;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
- spin_lock_irqsave(&port->lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&port->lock, flags);
- tty_wakeup(tty);
-
- func_exit();
-}
-
static int sx_tiocmget(struct tty_struct *tty, struct file *file)
{
@@ -1803,7 +1802,7 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
func_enter();
- if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+ if (sx_paranoia_check(port, tty->name, __func__)) {
func_exit();
return -ENODEV;
}
@@ -1845,7 +1844,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
func_enter();
- if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+ if (sx_paranoia_check(port, tty->name, __func__)) {
func_exit();
return -ENODEV;
}
@@ -1922,29 +1921,13 @@ static inline int sx_set_serial_info(struct specialix_port * port,
int change_speed;
func_enter();
- /*
- if (!access_ok(VERIFY_READ, (void *) newinfo, sizeof(tmp))) {
- func_exit();
- return -EFAULT;
- }
- */
+
if (copy_from_user(&tmp, newinfo, sizeof(tmp))) {
func_enter();
return -EFAULT;
}
-#if 0
- if ((tmp.irq != bp->irq) ||
- (tmp.port != bp->base) ||
- (tmp.type != PORT_CIRRUS) ||
- (tmp.baud_base != (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC) ||
- (tmp.custom_divisor != 0) ||
- (tmp.xmit_fifo_size != CD186x_NFIFO) ||
- (tmp.flags & ~SPECIALIX_LEGAL_FLAGS)) {
- func_exit();
- return -EINVAL;
- }
-#endif
+ lock_kernel();
change_speed = ((port->flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
@@ -1956,6 +1939,7 @@ static inline int sx_set_serial_info(struct specialix_port * port,
((tmp.flags & ~ASYNC_USR_MASK) !=
(port->flags & ~ASYNC_USR_MASK))) {
func_exit();
+ unlock_kernel();
return -EPERM;
}
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
@@ -1972,6 +1956,7 @@ static inline int sx_set_serial_info(struct specialix_port * port,
sx_change_speed(bp, port);
}
func_exit();
+ unlock_kernel();
return 0;
}
@@ -1984,12 +1969,8 @@ static inline int sx_get_serial_info(struct specialix_port * port,
func_enter();
- /*
- if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp)))
- return -EFAULT;
- */
-
memset(&tmp, 0, sizeof(tmp));
+ lock_kernel();
tmp.type = PORT_CIRRUS;
tmp.line = port - sx_port;
tmp.port = bp->base;
@@ -2000,6 +1981,7 @@ static inline int sx_get_serial_info(struct specialix_port * port,
tmp.closing_wait = port->closing_wait * HZ/100;
tmp.custom_divisor = port->custom_divisor;
tmp.xmit_fifo_size = CD186x_NFIFO;
+ unlock_kernel();
if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
func_exit();
return -EFAULT;
@@ -2045,23 +2027,6 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
sx_send_break(port, arg ? arg*(HZ/10) : HZ/4);
func_exit();
return 0;
- case TIOCGSOFTCAR:
- if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)argp)) {
- func_exit();
- return -EFAULT;
- }
- func_exit();
- return 0;
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned long __user *) argp)) {
- func_exit();
- return -EFAULT;
- }
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- func_exit();
- return 0;
case TIOCGSERIAL:
func_exit();
return sx_get_serial_info(port, argp);
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 874aaa08e95..d17be10c5d2 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -875,6 +875,7 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
timeout = HZ;
tend = jiffies + timeout;
+ lock_kernel();
while (stl_datastate(portp)) {
if (signal_pending(current))
break;
@@ -882,6 +883,7 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
if (time_after_eq(jiffies, tend))
break;
}
+ unlock_kernel();
}
/*****************************************************************************/
@@ -1273,18 +1275,9 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
rc = 0;
+ lock_kernel();
+
switch (cmd) {
- case TIOCGSOFTCAR:
- rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
- (unsigned __user *) argp);
- break;
- case TIOCSSOFTCAR:
- if (get_user(ival, (unsigned int __user *) arg))
- return -EFAULT;
- tty->termios->c_cflag =
- (tty->termios->c_cflag & ~CLOCAL) |
- (ival ? CLOCAL : 0);
- break;
case TIOCGSERIAL:
rc = stl_getserial(portp, argp);
break;
@@ -1308,7 +1301,7 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
rc = -ENOIOCTLCMD;
break;
}
-
+ unlock_kernel();
return rc;
}
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index a6e1c9ba121..f39f6fd8935 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -384,11 +384,11 @@ static struct real_driver sx_real_driver = {
#define sx_dprintk(f, str...) /* nothing */
#endif
-#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__FUNCTION__)
-#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__FUNCTION__)
+#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__func__)
+#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__func__)
#define func_enter2() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \
- __FUNCTION__, port->line)
+ __func__, port->line)
/*
* Firmware loader driver specific routines
@@ -1574,7 +1574,7 @@ static void sx_close(void *ptr)
sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n",
port->gs.count);
/*printk("%s SETTING port count to zero: %p count: %d\n",
- __FUNCTION__, port, port->gs.count);
+ __func__, port, port->gs.count);
port->gs.count = 0;*/
}
@@ -1844,6 +1844,7 @@ static void sx_break(struct tty_struct *tty, int flag)
int rv;
func_enter();
+ lock_kernel();
if (flag)
rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK);
@@ -1852,7 +1853,7 @@ static void sx_break(struct tty_struct *tty, int flag)
if (rv != 1)
printk(KERN_ERR "sx: couldn't send break (%x).\n",
read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat)));
-
+ unlock_kernel();
func_exit();
}
@@ -1888,23 +1889,12 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp,
int rc;
struct sx_port *port = tty->driver_data;
void __user *argp = (void __user *)arg;
- int ival;
/* func_enter2(); */
rc = 0;
+ lock_kernel();
switch (cmd) {
- case TIOCGSOFTCAR:
- rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
- (unsigned __user *)argp);
- break;
- case TIOCSSOFTCAR:
- if ((rc = get_user(ival, (unsigned __user *)argp)) == 0) {
- tty->termios->c_cflag =
- (tty->termios->c_cflag & ~CLOCAL) |
- (ival ? CLOCAL : 0);
- }
- break;
case TIOCGSERIAL:
rc = gs_getserial(&port->gs, argp);
break;
@@ -1915,6 +1905,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp,
rc = -ENOIOCTLCMD;
break;
}
+ unlock_kernel();
/* func_exit(); */
return rc;
@@ -2549,7 +2540,7 @@ static int __devinit sx_eisa_probe(struct device *dev)
goto err_flag;
}
board->base2 =
- board->base = ioremap(board->hw_base, SI2_EISA_WINDOW_LEN);
+ board->base = ioremap_nocache(board->hw_base, SI2_EISA_WINDOW_LEN);
if (!board->base) {
dev_err(dev, "can't remap memory\n");
goto err_reg;
@@ -2626,7 +2617,7 @@ static void __devinit fix_sx_pci(struct pci_dev *pdev, struct sx_board *board)
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase);
hwbase &= PCI_BASE_ADDRESS_MEM_MASK;
- rebase = ioremap(hwbase, 0x80);
+ rebase = ioremap_nocache(hwbase, 0x80);
t = readl(rebase + CNTRL_REG_OFFSET);
if (t != CNTRL_REG_GOODVALUE) {
printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> "
@@ -2770,7 +2761,7 @@ static int __init sx_init(void)
if (!request_region(board->hw_base, board->hw_len, "sx"))
continue;
board->base2 =
- board->base = ioremap(board->hw_base, board->hw_len);
+ board->base = ioremap_nocache(board->hw_base, board->hw_len);
if (!board->base)
goto err_sx_reg;
board->flags &= ~SX_BOARD_TYPE;
@@ -2794,7 +2785,7 @@ err_sx_reg:
if (!request_region(board->hw_base, board->hw_len, "sx"))
continue;
board->base2 =
- board->base = ioremap(board->hw_base, board->hw_len);
+ board->base = ioremap_nocache(board->hw_base, board->hw_len);
if (!board->base)
goto err_si_reg;
board->flags &= ~SX_BOARD_TYPE;
@@ -2817,7 +2808,7 @@ err_si_reg:
if (!request_region(board->hw_base, board->hw_len, "sx"))
continue;
board->base2 =
- board->base = ioremap(board->hw_base, board->hw_len);
+ board->base = ioremap_nocache(board->hw_base, board->hw_len);
if (!board->base)
goto err_si1_reg;
board->flags &= ~SX_BOARD_TYPE;
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index fadab1d9510..ac5080df256 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2026,34 +2026,35 @@ static void mgsl_change_params(struct mgsl_struct *info)
*
* Return Value: None
*/
-static void mgsl_put_char(struct tty_struct *tty, unsigned char ch)
+static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
+ struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
+ int ret = 0;
- if ( debug_level >= DEBUG_LEVEL_INFO ) {
- printk( "%s(%d):mgsl_put_char(%d) on %s\n",
- __FILE__,__LINE__,ch,info->device_name);
+ if (debug_level >= DEBUG_LEVEL_INFO) {
+ printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
+ __FILE__, __LINE__, ch, info->device_name);
}
if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
- return;
+ return 0;
if (!tty || !info->xmit_buf)
- return;
+ return 0;
- spin_lock_irqsave(&info->irq_spinlock,flags);
-
- if ( (info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active ) {
+ spin_lock_irqsave(&info->irq_spinlock, flags);
+ if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
info->xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= SERIAL_XMIT_SIZE-1;
info->xmit_cnt++;
+ ret = 1;
}
}
-
- spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
+ return ret;
} /* end of mgsl_put_char() */
@@ -2942,6 +2943,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
+ int ret;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@@ -2956,7 +2958,10 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
return -EIO;
}
- return mgsl_ioctl_common(info, cmd, arg);
+ lock_kernel();
+ ret = mgsl_ioctl_common(info, cmd, arg);
+ unlock_kernel();
+ return ret;
}
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
@@ -3153,8 +3158,7 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
if (info->flags & ASYNC_INITIALIZED)
mgsl_wait_until_sent(tty, info->timeout);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ mgsl_flush_buffer(tty);
tty_ldisc_flush(tty);
@@ -3217,7 +3221,8 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
* interval should also be less than the timeout.
* Note: use tight timings here to satisfy the NIST-PCTS.
*/
-
+
+ lock_kernel();
if ( info->params.data_rate ) {
char_time = info->timeout/(32 * 5);
if (!char_time)
@@ -3247,6 +3252,7 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
}
+ unlock_kernel();
exit:
if (debug_level >= DEBUG_LEVEL_INFO)
@@ -4144,7 +4150,8 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
}
info->lcr_mem_requested = true;
- info->memory_base = ioremap(info->phys_memory_base,0x40000);
+ info->memory_base = ioremap_nocache(info->phys_memory_base,
+ 0x40000);
if (!info->memory_base) {
printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
@@ -4157,12 +4164,14 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
goto errout;
}
- info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE) + info->lcr_offset;
+ info->lcr_base = ioremap_nocache(info->phys_lcr_base,
+ PAGE_SIZE);
if (!info->lcr_base) {
printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
goto errout;
}
+ info->lcr_base += info->lcr_offset;
} else {
/* claim DMA channel */
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index f3d8d72e5ea..2001b0e52dc 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -151,7 +151,7 @@ static void hangup(struct tty_struct *tty);
static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
-static void put_char(struct tty_struct *tty, unsigned char ch);
+static int put_char(struct tty_struct *tty, unsigned char ch);
static void send_xchar(struct tty_struct *tty, char ch);
static void wait_until_sent(struct tty_struct *tty, int timeout);
static int write_room(struct tty_struct *tty);
@@ -771,8 +771,7 @@ static void close(struct tty_struct *tty, struct file *filp)
if (info->flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
@@ -913,20 +912,24 @@ cleanup:
return ret;
}
-static void put_char(struct tty_struct *tty, unsigned char ch)
+static int put_char(struct tty_struct *tty, unsigned char ch)
{
struct slgt_info *info = tty->driver_data;
unsigned long flags;
+ int ret;
if (sanity_check(info, tty->name, "put_char"))
- return;
+ return 0;
DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
if (!info->tx_buf)
- return;
+ return 0;
spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active && (info->tx_count < info->max_frame_size))
+ if (!info->tx_active && (info->tx_count < info->max_frame_size)) {
info->tx_buf[info->tx_count++] = ch;
+ ret = 1;
+ }
spin_unlock_irqrestore(&info->lock,flags);
+ return ret;
}
static void send_xchar(struct tty_struct *tty, char ch)
@@ -967,6 +970,8 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
* Note: use tight timings here to satisfy the NIST-PCTS.
*/
+ lock_kernel();
+
if (info->params.data_rate) {
char_time = info->timeout/(32 * 5);
if (!char_time)
@@ -984,6 +989,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
+ unlock_kernel();
exit:
DBGINFO(("%s wait_until_sent exit\n", info->device_name));
@@ -1097,6 +1103,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
struct serial_icounter_struct __user *p_cuser; /* user space */
unsigned long flags;
void __user *argp = (void __user *)arg;
+ int ret;
if (sanity_check(info, tty->name, "ioctl"))
return -ENODEV;
@@ -1108,37 +1115,54 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return -EIO;
}
+ lock_kernel();
+
switch (cmd) {
case MGSL_IOCGPARAMS:
- return get_params(info, argp);
+ ret = get_params(info, argp);
+ break;
case MGSL_IOCSPARAMS:
- return set_params(info, argp);
+ ret = set_params(info, argp);
+ break;
case MGSL_IOCGTXIDLE:
- return get_txidle(info, argp);
+ ret = get_txidle(info, argp);
+ break;
case MGSL_IOCSTXIDLE:
- return set_txidle(info, (int)arg);
+ ret = set_txidle(info, (int)arg);
+ break;
case MGSL_IOCTXENABLE:
- return tx_enable(info, (int)arg);
+ ret = tx_enable(info, (int)arg);
+ break;
case MGSL_IOCRXENABLE:
- return rx_enable(info, (int)arg);
+ ret = rx_enable(info, (int)arg);
+ break;
case MGSL_IOCTXABORT:
- return tx_abort(info);
+ ret = tx_abort(info);
+ break;
case MGSL_IOCGSTATS:
- return get_stats(info, argp);
+ ret = get_stats(info, argp);
+ break;
case MGSL_IOCWAITEVENT:
- return wait_mgsl_event(info, argp);
+ ret = wait_mgsl_event(info, argp);
+ break;
case TIOCMIWAIT:
- return modem_input_wait(info,(int)arg);
+ ret = modem_input_wait(info,(int)arg);
+ break;
case MGSL_IOCGIF:
- return get_interface(info, argp);
+ ret = get_interface(info, argp);
+ break;
case MGSL_IOCSIF:
- return set_interface(info,(int)arg);
+ ret = set_interface(info,(int)arg);
+ break;
case MGSL_IOCSGPIO:
- return set_gpio(info, argp);
+ ret = set_gpio(info, argp);
+ break;
case MGSL_IOCGGPIO:
- return get_gpio(info, argp);
+ ret = get_gpio(info, argp);
+ break;
case MGSL_IOCWAITGPIO:
- return wait_gpio(info, argp);
+ ret = wait_gpio(info, argp);
+ break;
case TIOCGICOUNT:
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
@@ -1155,12 +1179,14 @@ static int ioctl(struct tty_struct *tty, struct file *file,
put_user(cnow.parity, &p_cuser->parity) ||
put_user(cnow.brk, &p_cuser->brk) ||
put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ ret = 0;
+ break;
default:
- return -ENOIOCTLCMD;
+ ret = -ENOIOCTLCMD;
}
- return 0;
+ unlock_kernel();
+ return ret;
}
/*
@@ -3324,7 +3350,7 @@ static int claim_resources(struct slgt_info *info)
else
info->reg_addr_requested = true;
- info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE);
+ info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
if (!info->reg_addr) {
DBGERR(("%s cant map device registers, addr=%08X\n",
info->device_name, info->phys_reg_addr));
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index e98c3e6f821..bec54866e0b 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -519,7 +519,7 @@ static void hangup(struct tty_struct *tty);
static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
-static void put_char(struct tty_struct *tty, unsigned char ch);
+static int put_char(struct tty_struct *tty, unsigned char ch);
static void send_xchar(struct tty_struct *tty, char ch);
static void wait_until_sent(struct tty_struct *tty, int timeout);
static int write_room(struct tty_struct *tty);
@@ -862,8 +862,7 @@ static void close(struct tty_struct *tty, struct file *filp)
if (info->flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ flush_buffer(tty);
tty_ldisc_flush(tty);
@@ -1046,10 +1045,11 @@ cleanup:
/* Add a character to the transmit buffer.
*/
-static void put_char(struct tty_struct *tty, unsigned char ch)
+static int put_char(struct tty_struct *tty, unsigned char ch)
{
SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
unsigned long flags;
+ int ret = 0;
if ( debug_level >= DEBUG_LEVEL_INFO ) {
printk( "%s(%d):%s put_char(%d)\n",
@@ -1057,10 +1057,10 @@ static void put_char(struct tty_struct *tty, unsigned char ch)
}
if (sanity_check(info, tty->name, "put_char"))
- return;
+ return 0;
if (!info->tx_buf)
- return;
+ return 0;
spin_lock_irqsave(&info->lock,flags);
@@ -1072,10 +1072,12 @@ static void put_char(struct tty_struct *tty, unsigned char ch)
if (info->tx_put >= info->max_frame_size)
info->tx_put -= info->max_frame_size;
info->tx_count++;
+ ret = 1;
}
}
spin_unlock_irqrestore(&info->lock,flags);
+ return ret;
}
/* Send a high-priority XON/XOFF character
@@ -1119,6 +1121,8 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
if (sanity_check(info, tty->name, "wait_until_sent"))
return;
+ lock_kernel();
+
if (!(info->flags & ASYNC_INITIALIZED))
goto exit;
@@ -1161,6 +1165,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
}
exit:
+ unlock_kernel();
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s wait_until_sent() exit\n",
__FILE__,__LINE__, info->device_name );
@@ -1176,6 +1181,7 @@ static int write_room(struct tty_struct *tty)
if (sanity_check(info, tty->name, "write_room"))
return 0;
+ lock_kernel();
if (info->params.mode == MGSL_MODE_HDLC) {
ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
} else {
@@ -1183,6 +1189,7 @@ static int write_room(struct tty_struct *tty)
if (ret < 0)
ret = 0;
}
+ unlock_kernel();
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s write_room()=%d\n",
@@ -1303,7 +1310,7 @@ static void tx_release(struct tty_struct *tty)
*
* Return Value: 0 if success, otherwise error code
*/
-static int ioctl(struct tty_struct *tty, struct file *file,
+static int do_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
@@ -1393,6 +1400,16 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
+static int ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret;
+ lock_kernel();
+ ret = do_ioctl(tty, file, cmd, arg);
+ unlock_kernel();
+ return ret;
+}
+
/*
* /proc fs routines....
*/
@@ -3626,7 +3643,8 @@ static int claim_resources(SLMP_INFO *info)
else
info->sca_statctrl_requested = true;
- info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE);
+ info->memory_base = ioremap_nocache(info->phys_memory_base,
+ SCA_MEM_SIZE);
if (!info->memory_base) {
printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
@@ -3634,7 +3652,7 @@ static int claim_resources(SLMP_INFO *info)
goto errout;
}
- info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE);
+ info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
if (!info->lcr_base) {
printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
@@ -3643,7 +3661,7 @@ static int claim_resources(SLMP_INFO *info)
}
info->lcr_base += info->lcr_offset;
- info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE);
+ info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
if (!info->sca_base) {
printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_sca_base );
@@ -3652,7 +3670,8 @@ static int claim_resources(SLMP_INFO *info)
}
info->sca_base += info->sca_offset;
- info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE);
+ info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
+ PAGE_SIZE);
if (!info->statctrl_base) {
printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 1ade193c912..9e9bad8bdcf 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -196,6 +196,48 @@ static struct sysrq_key_op sysrq_showlocks_op = {
#define sysrq_showlocks_op (*(struct sysrq_key_op *)0)
#endif
+#ifdef CONFIG_SMP
+static DEFINE_SPINLOCK(show_lock);
+
+static void showacpu(void *dummy)
+{
+ unsigned long flags;
+
+ /* Idle CPUs have no interesting backtrace. */
+ if (idle_cpu(smp_processor_id()))
+ return;
+
+ spin_lock_irqsave(&show_lock, flags);
+ printk(KERN_INFO "CPU%d:\n", smp_processor_id());
+ show_stack(NULL, NULL);
+ spin_unlock_irqrestore(&show_lock, flags);
+}
+
+static void sysrq_showregs_othercpus(struct work_struct *dummy)
+{
+ smp_call_function(showacpu, NULL, 0, 0);
+}
+
+static DECLARE_WORK(sysrq_showallcpus, sysrq_showregs_othercpus);
+
+static void sysrq_handle_showallcpus(int key, struct tty_struct *tty)
+{
+ struct pt_regs *regs = get_irq_regs();
+ if (regs) {
+ printk(KERN_INFO "CPU%d:\n", smp_processor_id());
+ show_regs(regs);
+ }
+ schedule_work(&sysrq_showallcpus);
+}
+
+static struct sysrq_key_op sysrq_showallcpus_op = {
+ .handler = sysrq_handle_showallcpus,
+ .help_msg = "aLlcpus",
+ .action_msg = "Show backtrace of all active CPUs",
+ .enable_mask = SYSRQ_ENABLE_DUMP,
+};
+#endif
+
static void sysrq_handle_showregs(int key, struct tty_struct *tty)
{
struct pt_regs *regs = get_irq_regs();
@@ -340,7 +382,11 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
&sysrq_kill_op, /* i */
NULL, /* j */
&sysrq_SAK_op, /* k */
+#ifdef CONFIG_SMP
+ &sysrq_showallcpus_op, /* l */
+#else
NULL, /* l */
+#endif
&sysrq_showmem_op, /* m */
&sysrq_unrt_op, /* n */
/* o: This will often be registered as 'Off' at init time */
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index ce5ebe3b168..663cd15d7c7 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -426,7 +426,7 @@ static int tosh_probe(void)
int i,major,minor,day,year,month,flag;
unsigned char signature[7] = { 0x54,0x4f,0x53,0x48,0x49,0x42,0x41 };
SMMRegisters regs;
- void __iomem *bios = ioremap(0xf0000, 0x10000);
+ void __iomem *bios = ioremap_cache(0xf0000, 0x10000);
if (!bios)
return -ENOMEM;
@@ -520,12 +520,11 @@ static int __init toshiba_init(void)
{
struct proc_dir_entry *pde;
- pde = create_proc_entry("toshiba", 0, NULL);
+ pde = proc_create("toshiba", 0, NULL, &proc_toshiba_fops);
if (!pde) {
misc_deregister(&tosh_device);
return -ENOMEM;
}
- pde->proc_fops = &proc_toshiba_fops;
}
#endif
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 8f3f7620f95..3738cfa209f 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -23,7 +23,7 @@ if TCG_TPM
config TCG_TIS
tristate "TPM Interface Specification 1.2 Interface"
- depends on PNPACPI
+ depends on PNP
---help---
If you have a TPM security chip that is compliant with the
TCG TIS 1.2 TPM specification say Yes and it will be accessible
@@ -32,7 +32,6 @@ config TCG_TIS
config TCG_NSC
tristate "National Semiconductor TPM Interface"
- depends on PNPACPI
---help---
If you have a TPM security chip from National Semiconductor
say Yes and it will be accessible from within Linux. To
@@ -48,7 +47,7 @@ config TCG_ATMEL
config TCG_INFINEON
tristate "Infineon Technologies TPM Interface"
- depends on PNPACPI
+ depends on PNP
---help---
If you have a TPM security chip from Infineon Technologies
(either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 6313326bc41..ab18c1e7b11 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -264,7 +264,7 @@ static const struct tpm_vendor_specific tpm_nsc = {
static struct platform_device *pdev = NULL;
-static void __devexit tpm_nsc_remove(struct device *dev)
+static void tpm_nsc_remove(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
if ( chip ) {
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 7722466e052..3582f43345a 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -11,6 +11,7 @@
#include <linux/audit.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/tty.h>
struct tty_audit_buf {
@@ -92,7 +93,7 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid,
get_task_comm(name, tsk);
audit_log_untrustedstring(ab, name);
audit_log_format(ab, " data=");
- audit_log_n_untrustedstring(ab, buf->valid, buf->data);
+ audit_log_n_untrustedstring(ab, buf->data, buf->valid);
audit_log_end(ab);
}
buf->valid = 0;
@@ -151,14 +152,9 @@ void tty_audit_fork(struct signal_struct *sig)
/**
* tty_audit_push_task - Flush task's pending audit data
*/
-void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid)
+void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid)
{
struct tty_audit_buf *buf;
- /* FIXME I think this is correct. Check against netlink once that is
- * I really need to read this code more closely. But that's for
- * another patch.
- */
- unsigned int sessionid = audit_get_sessionid(tsk);
spin_lock_irq(&tsk->sighand->siglock);
buf = tsk->signal->tty_audit_buf;
@@ -238,6 +234,10 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
if (unlikely(size == 0))
return;
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY
+ && tty->driver->subtype == PTY_TYPE_MASTER)
+ return;
+
buf = tty_audit_buf_get(tty);
if (!buf)
return;
@@ -300,53 +300,3 @@ void tty_audit_push(struct tty_struct *tty)
tty_audit_buf_put(buf);
}
}
-
-/**
- * tty_audit_opening - A TTY is being opened.
- *
- * As a special hack, tasks that close all their TTYs and open new ones
- * are assumed to be system daemons (e.g. getty) and auditing is
- * automatically disabled for them.
- */
-void tty_audit_opening(void)
-{
- int disable;
-
- disable = 1;
- spin_lock_irq(&current->sighand->siglock);
- if (current->signal->audit_tty == 0)
- disable = 0;
- spin_unlock_irq(&current->sighand->siglock);
- if (!disable)
- return;
-
- task_lock(current);
- if (current->files) {
- struct fdtable *fdt;
- unsigned i;
-
- /*
- * We don't take a ref to the file, so we must hold ->file_lock
- * instead.
- */
- spin_lock(&current->files->file_lock);
- fdt = files_fdtable(current->files);
- for (i = 0; i < fdt->max_fds; i++) {
- struct file *filp;
-
- filp = fcheck_files(current->files, i);
- if (filp && is_tty(filp)) {
- disable = 0;
- break;
- }
- }
- spin_unlock(&current->files->file_lock);
- }
- task_unlock(current);
- if (!disable)
- return;
-
- spin_lock_irq(&current->sighand->siglock);
- current->signal->audit_tty = 0;
- spin_unlock_irq(&current->sighand->siglock);
-}
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 98b65a23099..49c1a2267a5 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -78,6 +78,7 @@
#include <linux/tty_flip.h>
#include <linux/devpts_fs.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/console.h>
#include <linux/timer.h>
#include <linux/ctype.h>
@@ -91,7 +92,6 @@
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
-#include <linux/idr.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/delay.h>
@@ -137,9 +137,6 @@ EXPORT_SYMBOL(tty_mutex);
#ifdef CONFIG_UNIX98_PTYS
extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */
-extern int pty_limit; /* Config limit on Unix98 ptys */
-static DEFINE_IDR(allocated_ptys);
-static DEFINE_MUTEX(allocated_ptys_lock);
static int ptmx_open(struct inode *, struct file *);
#endif
@@ -152,8 +149,7 @@ ssize_t redirected_tty_write(struct file *, const char __user *,
static unsigned int tty_poll(struct file *, poll_table *);
static int tty_open(struct inode *, struct file *);
static int tty_release(struct inode *, struct file *);
-int tty_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
#ifdef CONFIG_COMPAT
static long tty_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg);
@@ -1109,8 +1105,8 @@ restart:
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
- if (tty->ldisc.num != o_ldisc.num && tty->driver->set_ldisc)
- tty->driver->set_ldisc(tty);
+ if (tty->ldisc.num != o_ldisc.num && tty->ops->set_ldisc)
+ tty->ops->set_ldisc(tty);
tty_ldisc_put(o_ldisc.num);
@@ -1182,9 +1178,8 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
if (*str == '\0')
str = NULL;
- if (tty_line >= 0 && tty_line <= p->num && p->poll_init &&
- !p->poll_init(p, tty_line, str)) {
-
+ if (tty_line >= 0 && tty_line <= p->num && p->ops &&
+ p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) {
res = p;
*line = tty_line;
break;
@@ -1205,26 +1200,37 @@ EXPORT_SYMBOL_GPL(tty_find_polling_driver);
* not in the foreground, send a SIGTTOU. If the signal is blocked or
* ignored, go ahead and perform the operation. (POSIX 7.2)
*
- * Locking: none
+ * Locking: ctrl_lock
*/
int tty_check_change(struct tty_struct *tty)
{
+ unsigned long flags;
+ int ret = 0;
+
if (current->signal->tty != tty)
return 0;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+
if (!tty->pgrp) {
printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n");
- return 0;
+ goto out;
}
if (task_pgrp(current) == tty->pgrp)
- return 0;
+ goto out;
if (is_ignored(SIGTTOU))
- return 0;
- if (is_current_pgrp_orphaned())
- return -EIO;
+ goto out;
+ if (is_current_pgrp_orphaned()) {
+ ret = -EIO;
+ goto out;
+ }
kill_pgrp(task_pgrp(current), SIGTTOU, 1);
set_thread_flag(TIF_SIGPENDING);
- return -ERESTARTSYS;
+ ret = -ERESTARTSYS;
+out:
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ return ret;
}
EXPORT_SYMBOL(tty_check_change);
@@ -1247,8 +1253,8 @@ static unsigned int hung_up_tty_poll(struct file *filp, poll_table *wait)
return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
}
-static int hung_up_tty_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long hung_up_tty_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}
@@ -1264,7 +1270,7 @@ static const struct file_operations tty_fops = {
.read = tty_read,
.write = tty_write,
.poll = tty_poll,
- .ioctl = tty_ioctl,
+ .unlocked_ioctl = tty_ioctl,
.compat_ioctl = tty_compat_ioctl,
.open = tty_open,
.release = tty_release,
@@ -1277,7 +1283,7 @@ static const struct file_operations ptmx_fops = {
.read = tty_read,
.write = tty_write,
.poll = tty_poll,
- .ioctl = tty_ioctl,
+ .unlocked_ioctl = tty_ioctl,
.compat_ioctl = tty_compat_ioctl,
.open = ptmx_open,
.release = tty_release,
@@ -1290,7 +1296,7 @@ static const struct file_operations console_fops = {
.read = tty_read,
.write = redirected_tty_write,
.poll = tty_poll,
- .ioctl = tty_ioctl,
+ .unlocked_ioctl = tty_ioctl,
.compat_ioctl = tty_compat_ioctl,
.open = tty_open,
.release = tty_release,
@@ -1302,7 +1308,7 @@ static const struct file_operations hung_up_tty_fops = {
.read = hung_up_tty_read,
.write = hung_up_tty_write,
.poll = hung_up_tty_poll,
- .ioctl = hung_up_tty_ioctl,
+ .unlocked_ioctl = hung_up_tty_ioctl,
.compat_ioctl = hung_up_tty_compat_ioctl,
.release = tty_release,
};
@@ -1404,6 +1410,7 @@ static void do_tty_hangup(struct work_struct *work)
struct task_struct *p;
struct tty_ldisc *ld;
int closecount = 0, n;
+ unsigned long flags;
if (!tty)
return;
@@ -1441,8 +1448,7 @@ static void do_tty_hangup(struct work_struct *work)
/* We may have no line discipline at this point */
if (ld->flush_buffer)
ld->flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
ld->write_wakeup)
ld->write_wakeup(tty);
@@ -1480,19 +1486,24 @@ static void do_tty_hangup(struct work_struct *work)
__group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
__group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
put_pid(p->signal->tty_old_pgrp); /* A noop */
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
if (tty->pgrp)
p->signal->tty_old_pgrp = get_pid(tty->pgrp);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
spin_unlock_irq(&p->sighand->siglock);
} while_each_pid_task(tty->session, PIDTYPE_SID, p);
}
read_unlock(&tasklist_lock);
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->flags = 0;
put_pid(tty->session);
put_pid(tty->pgrp);
tty->session = NULL;
tty->pgrp = NULL;
tty->ctrl_status = 0;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
/*
* If one of the devices matches a console pointer, we
* cannot just call hangup() because that will cause
@@ -1500,11 +1511,11 @@ static void do_tty_hangup(struct work_struct *work)
* So we just call close() the right number of times.
*/
if (cons_filp) {
- if (tty->driver->close)
+ if (tty->ops->close)
for (n = 0; n < closecount; n++)
- tty->driver->close(tty, cons_filp);
- } else if (tty->driver->hangup)
- (tty->driver->hangup)(tty);
+ tty->ops->close(tty, cons_filp);
+ } else if (tty->ops->hangup)
+ (tty->ops->hangup)(tty);
/*
* We don't want to have driver/ldisc interactions beyond
* the ones we did here. The driver layer expects no
@@ -1626,16 +1637,17 @@ void disassociate_ctty(int on_exit)
struct tty_struct *tty;
struct pid *tty_pgrp = NULL;
- lock_kernel();
mutex_lock(&tty_mutex);
tty = get_current_tty();
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
mutex_unlock(&tty_mutex);
+ lock_kernel();
/* XXX: here we race, there is nothing protecting tty */
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
+ unlock_kernel();
} else if (on_exit) {
struct pid *old_pgrp;
spin_lock_irq(&current->sighand->siglock);
@@ -1648,7 +1660,6 @@ void disassociate_ctty(int on_exit)
put_pid(old_pgrp);
}
mutex_unlock(&tty_mutex);
- unlock_kernel();
return;
}
if (tty_pgrp) {
@@ -1667,10 +1678,13 @@ void disassociate_ctty(int on_exit)
/* It is possible that do_tty_hangup has free'd this tty */
tty = get_current_tty();
if (tty) {
+ unsigned long flags;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
put_pid(tty->session);
put_pid(tty->pgrp);
tty->session = NULL;
tty->pgrp = NULL;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
} else {
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "error attempted to write to tty [0x%p]"
@@ -1683,7 +1697,6 @@ void disassociate_ctty(int on_exit)
read_lock(&tasklist_lock);
session_clear_tty(task_session(current));
read_unlock(&tasklist_lock);
- unlock_kernel();
}
/**
@@ -1693,8 +1706,10 @@ void disassociate_ctty(int on_exit)
void no_tty(void)
{
struct task_struct *tsk = current;
+ lock_kernel();
if (tsk->signal->leader)
disassociate_ctty(0);
+ unlock_kernel();
proc_clear_tty(tsk);
}
@@ -1714,21 +1729,26 @@ void no_tty(void)
* but not always.
*
* Locking:
- * Broken. Relies on BKL which is unsafe here.
+ * Uses the tty control lock internally
*/
void stop_tty(struct tty_struct *tty)
{
- if (tty->stopped)
+ unsigned long flags;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ if (tty->stopped) {
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
return;
+ }
tty->stopped = 1;
if (tty->link && tty->link->packet) {
tty->ctrl_status &= ~TIOCPKT_START;
tty->ctrl_status |= TIOCPKT_STOP;
wake_up_interruptible(&tty->link->read_wait);
}
- if (tty->driver->stop)
- (tty->driver->stop)(tty);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ if (tty->ops->stop)
+ (tty->ops->stop)(tty);
}
EXPORT_SYMBOL(stop_tty);
@@ -1743,21 +1763,26 @@ EXPORT_SYMBOL(stop_tty);
* driver start method is invoked and the line discipline woken.
*
* Locking:
- * Broken. Relies on BKL which is unsafe here.
+ * ctrl_lock
*/
void start_tty(struct tty_struct *tty)
{
- if (!tty->stopped || tty->flow_stopped)
+ unsigned long flags;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ if (!tty->stopped || tty->flow_stopped) {
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
return;
+ }
tty->stopped = 0;
if (tty->link && tty->link->packet) {
tty->ctrl_status &= ~TIOCPKT_STOP;
tty->ctrl_status |= TIOCPKT_START;
wake_up_interruptible(&tty->link->read_wait);
}
- if (tty->driver->start)
- (tty->driver->start)(tty);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ if (tty->ops->start)
+ (tty->ops->start)(tty);
/* If we have a running line discipline it may need kicking */
tty_wakeup(tty);
}
@@ -1775,10 +1800,8 @@ EXPORT_SYMBOL(start_tty);
* for hung up devices before calling the line discipline method.
*
* Locking:
- * Locks the line discipline internally while needed
- * For historical reasons the line discipline read method is
- * invoked under the BKL. This will go away in time so do not rely on it
- * in new code. Multiple read calls may be outstanding in parallel.
+ * Locks the line discipline internally while needed. Multiple
+ * read calls may be outstanding in parallel.
*/
static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
@@ -1799,13 +1822,11 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
/* We want to wait for the line discipline to sort out in this
situation */
ld = tty_ldisc_ref_wait(tty);
- lock_kernel();
if (ld->read)
i = (ld->read)(tty, file, buf, count);
else
i = -EIO;
tty_ldisc_deref(ld);
- unlock_kernel();
if (i > 0)
inode->i_atime = current_fs_time(inode->i_sb);
return i;
@@ -1893,9 +1914,7 @@ static inline ssize_t do_tty_write(
ret = -EFAULT;
if (copy_from_user(tty->write_buf, buf, size))
break;
- lock_kernel();
ret = write(tty, file, tty->write_buf, size);
- unlock_kernel();
if (ret <= 0)
break;
written += ret;
@@ -1948,10 +1967,13 @@ static ssize_t tty_write(struct file *file, const char __user *buf,
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_write"))
return -EIO;
- if (!tty || !tty->driver->write ||
+ if (!tty || !tty->ops->write ||
(test_bit(TTY_IO_ERROR, &tty->flags)))
return -EIO;
-
+ /* Short term debug to catch buggy drivers */
+ if (tty->ops->write_room == NULL)
+ printk(KERN_ERR "tty driver %s lacks a write_room method.\n",
+ tty->driver->name);
ld = tty_ldisc_ref_wait(tty);
if (!ld->write)
ret = -EIO;
@@ -2098,6 +2120,7 @@ static int init_dev(struct tty_driver *driver, int idx,
goto fail_no_mem;
initialize_tty_struct(tty);
tty->driver = driver;
+ tty->ops = driver->ops;
tty->index = idx;
tty_line_name(driver, idx, tty->name);
@@ -2128,6 +2151,7 @@ static int init_dev(struct tty_driver *driver, int idx,
goto free_mem_out;
initialize_tty_struct(o_tty);
o_tty->driver = driver->other;
+ o_tty->ops = driver->ops;
o_tty->index = idx;
tty_line_name(driver->other, idx, o_tty->name);
@@ -2432,8 +2456,8 @@ static void release_dev(struct file *filp)
}
}
#endif
- if (tty->driver->close)
- tty->driver->close(tty, filp);
+ if (tty->ops->close)
+ tty->ops->close(tty, filp);
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
@@ -2612,15 +2636,9 @@ static void release_dev(struct file *filp)
*/
release_tty(tty, idx);
-#ifdef CONFIG_UNIX98_PTYS
/* Make this pty number available for reallocation */
- if (devpts) {
- mutex_lock(&allocated_ptys_lock);
- idr_remove(&allocated_ptys, idx);
- mutex_unlock(&allocated_ptys_lock);
- }
-#endif
-
+ if (devpts)
+ devpts_kill_index(idx);
}
/**
@@ -2716,8 +2734,8 @@ got_driver:
printk(KERN_DEBUG "opening %s...", tty->name);
#endif
if (!retval) {
- if (tty->driver->open)
- retval = tty->driver->open(tty, filp);
+ if (tty->ops->open)
+ retval = tty->ops->open(tty, filp);
else
retval = -ENODEV;
}
@@ -2755,7 +2773,6 @@ got_driver:
__proc_set_tty(current, tty);
spin_unlock_irq(&current->sighand->siglock);
mutex_unlock(&tty_mutex);
- tty_audit_opening();
return 0;
}
@@ -2777,29 +2794,13 @@ static int ptmx_open(struct inode *inode, struct file *filp)
struct tty_struct *tty;
int retval;
int index;
- int idr_ret;
nonseekable_open(inode, filp);
/* find a device that is not in use. */
- mutex_lock(&allocated_ptys_lock);
- if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) {
- mutex_unlock(&allocated_ptys_lock);
- return -ENOMEM;
- }
- idr_ret = idr_get_new(&allocated_ptys, NULL, &index);
- if (idr_ret < 0) {
- mutex_unlock(&allocated_ptys_lock);
- if (idr_ret == -EAGAIN)
- return -ENOMEM;
- return -EIO;
- }
- if (index >= pty_limit) {
- idr_remove(&allocated_ptys, index);
- mutex_unlock(&allocated_ptys_lock);
- return -EIO;
- }
- mutex_unlock(&allocated_ptys_lock);
+ index = devpts_new_index();
+ if (index < 0)
+ return index;
mutex_lock(&tty_mutex);
retval = init_dev(ptm_driver, index, &tty);
@@ -2812,23 +2813,19 @@ static int ptmx_open(struct inode *inode, struct file *filp)
filp->private_data = tty;
file_move(filp, &tty->tty_files);
- retval = -ENOMEM;
- if (devpts_pty_new(tty->link))
+ retval = devpts_pty_new(tty->link);
+ if (retval)
goto out1;
- check_tty_count(tty, "tty_open");
- retval = ptm_driver->open(tty, filp);
- if (!retval) {
- tty_audit_opening();
+ check_tty_count(tty, "ptmx_open");
+ retval = ptm_driver->ops->open(tty, filp);
+ if (!retval)
return 0;
- }
out1:
release_dev(filp);
return retval;
out:
- mutex_lock(&allocated_ptys_lock);
- idr_remove(&allocated_ptys, index);
- mutex_unlock(&allocated_ptys_lock);
+ devpts_kill_index(index);
return retval;
}
#endif
@@ -2885,6 +2882,7 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait)
static int tty_fasync(int fd, struct file *filp, int on)
{
struct tty_struct *tty;
+ unsigned long flags;
int retval;
tty = (struct tty_struct *)filp->private_data;
@@ -2900,6 +2898,7 @@ static int tty_fasync(int fd, struct file *filp, int on)
struct pid *pid;
if (!waitqueue_active(&tty->read_wait))
tty->minimum_to_wake = 1;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
if (tty->pgrp) {
pid = tty->pgrp;
type = PIDTYPE_PGID;
@@ -2907,6 +2906,7 @@ static int tty_fasync(int fd, struct file *filp, int on)
pid = task_pid(current);
type = PIDTYPE_PID;
}
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
retval = __f_setown(filp, pid, type, 0);
if (retval)
return retval;
@@ -2992,6 +2992,8 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize __user *arg)
{
struct winsize tmp_ws;
+ struct pid *pgrp, *rpgrp;
+ unsigned long flags;
if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
return -EFAULT;
@@ -3009,10 +3011,21 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
}
}
#endif
- if (tty->pgrp)
- kill_pgrp(tty->pgrp, SIGWINCH, 1);
- if ((real_tty->pgrp != tty->pgrp) && real_tty->pgrp)
- kill_pgrp(real_tty->pgrp, SIGWINCH, 1);
+ /* Get the PID values and reference them so we can
+ avoid holding the tty ctrl lock while sending signals */
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ pgrp = get_pid(tty->pgrp);
+ rpgrp = get_pid(real_tty->pgrp);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+ if (pgrp)
+ kill_pgrp(pgrp, SIGWINCH, 1);
+ if (rpgrp != pgrp && rpgrp)
+ kill_pgrp(rpgrp, SIGWINCH, 1);
+
+ put_pid(pgrp);
+ put_pid(rpgrp);
+
tty->winsize = tmp_ws;
real_tty->winsize = tmp_ws;
done:
@@ -3073,10 +3086,13 @@ static int fionbio(struct file *file, int __user *p)
if (get_user(nonblock, p))
return -EFAULT;
+ /* file->f_flags is still BKL protected in the fs layer - vomit */
+ lock_kernel();
if (nonblock)
file->f_flags |= O_NONBLOCK;
else
file->f_flags &= ~O_NONBLOCK;
+ unlock_kernel();
return 0;
}
@@ -3134,6 +3150,27 @@ unlock:
}
/**
+ * tty_get_pgrp - return a ref counted pgrp pid
+ * @tty: tty to read
+ *
+ * Returns a refcounted instance of the pid struct for the process
+ * group controlling the tty.
+ */
+
+struct pid *tty_get_pgrp(struct tty_struct *tty)
+{
+ unsigned long flags;
+ struct pid *pgrp;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ pgrp = get_pid(tty->pgrp);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+ return pgrp;
+}
+EXPORT_SYMBOL_GPL(tty_get_pgrp);
+
+/**
* tiocgpgrp - get process group
* @tty: tty passed by user
* @real_tty: tty side of the tty pased by the user if a pty else the tty
@@ -3147,13 +3184,18 @@ unlock:
static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
+ struct pid *pid;
+ int ret;
/*
* (tty == real_tty) is a cheap way of
* testing if the tty is NOT a master pty.
*/
if (tty == real_tty && current->signal->tty != real_tty)
return -ENOTTY;
- return put_user(pid_vnr(real_tty->pgrp), p);
+ pid = tty_get_pgrp(real_tty);
+ ret = put_user(pid_vnr(pid), p);
+ put_pid(pid);
+ return ret;
}
/**
@@ -3165,7 +3207,7 @@ static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t
* Set the process group of the tty to the session passed. Only
* permitted where the tty session is our session.
*
- * Locking: None
+ * Locking: RCU, ctrl lock
*/
static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
@@ -3173,6 +3215,7 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t
struct pid *pgrp;
pid_t pgrp_nr;
int retval = tty_check_change(real_tty);
+ unsigned long flags;
if (retval == -EIO)
return -ENOTTY;
@@ -3195,8 +3238,10 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t
if (session_of_pgrp(pgrp) != task_session(current))
goto out_unlock;
retval = 0;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
put_pid(real_tty->pgrp);
real_tty->pgrp = get_pid(pgrp);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
out_unlock:
rcu_read_unlock();
return retval;
@@ -3240,10 +3285,16 @@ static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t _
static int tiocsetd(struct tty_struct *tty, int __user *p)
{
int ldisc;
+ int ret;
if (get_user(ldisc, p))
return -EFAULT;
- return tty_set_ldisc(tty, ldisc);
+
+ lock_kernel();
+ ret = tty_set_ldisc(tty, ldisc);
+ unlock_kernel();
+
+ return ret;
}
/**
@@ -3263,18 +3314,18 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
{
if (tty_write_lock(tty, 0) < 0)
return -EINTR;
- tty->driver->break_ctl(tty, -1);
+ tty->ops->break_ctl(tty, -1);
if (!signal_pending(current))
msleep_interruptible(duration);
- tty->driver->break_ctl(tty, 0);
+ tty->ops->break_ctl(tty, 0);
tty_write_unlock(tty);
- if (signal_pending(current))
+ if (!signal_pending(current))
return -EINTR;
return 0;
}
/**
- * tiocmget - get modem status
+ * tty_tiocmget - get modem status
* @tty: tty device
* @file: user file pointer
* @p: pointer to result
@@ -3289,8 +3340,8 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
{
int retval = -EINVAL;
- if (tty->driver->tiocmget) {
- retval = tty->driver->tiocmget(tty, file);
+ if (tty->ops->tiocmget) {
+ retval = tty->ops->tiocmget(tty, file);
if (retval >= 0)
retval = put_user(retval, p);
@@ -3299,7 +3350,7 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
}
/**
- * tiocmset - set modem status
+ * tty_tiocmset - set modem status
* @tty: tty device
* @file: user file pointer
* @cmd: command - clear bits, set bits or set all
@@ -3316,7 +3367,7 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
{
int retval = -EINVAL;
- if (tty->driver->tiocmset) {
+ if (tty->ops->tiocmset) {
unsigned int set, clear, val;
retval = get_user(val, p);
@@ -3340,7 +3391,7 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
- retval = tty->driver->tiocmset(tty, file, set, clear);
+ retval = tty->ops->tiocmset(tty, file, set, clear);
}
return retval;
}
@@ -3348,20 +3399,18 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
/*
* Split this up, as gcc can choke on it otherwise..
*/
-int tty_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct tty_struct *tty, *real_tty;
void __user *p = (void __user *)arg;
int retval;
struct tty_ldisc *ld;
+ struct inode *inode = file->f_dentry->d_inode;
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
- /* CHECKME: is this safe as one end closes ? */
-
real_tty = tty;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
@@ -3370,21 +3419,28 @@ int tty_ioctl(struct inode *inode, struct file *file,
/*
* Break handling by driver
*/
- if (!tty->driver->break_ctl) {
+
+ retval = -EINVAL;
+
+ if (!tty->ops->break_ctl) {
switch (cmd) {
case TIOCSBRK:
case TIOCCBRK:
- if (tty->driver->ioctl)
- return tty->driver->ioctl(tty, file, cmd, arg);
- return -EINVAL;
+ if (tty->ops->ioctl)
+ retval = tty->ops->ioctl(tty, file, cmd, arg);
+ if (retval != -EINVAL && retval != -ENOIOCTLCMD)
+ printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
+ return retval;
/* These two ioctl's always return success; even if */
/* the driver doesn't support them. */
case TCSBRK:
case TCSBRKP:
- if (!tty->driver->ioctl)
+ if (!tty->ops->ioctl)
return 0;
- retval = tty->driver->ioctl(tty, file, cmd, arg);
+ retval = tty->ops->ioctl(tty, file, cmd, arg);
+ if (retval != -EINVAL && retval != -ENOIOCTLCMD)
+ printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
if (retval == -ENOIOCTLCMD)
retval = 0;
return retval;
@@ -3442,7 +3498,6 @@ int tty_ioctl(struct inode *inode, struct file *file,
case TIOCGSID:
return tiocgsid(tty, real_tty, p);
case TIOCGETD:
- /* FIXME: check this is ok */
return put_user(tty->ldisc.num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
@@ -3454,11 +3509,13 @@ int tty_ioctl(struct inode *inode, struct file *file,
* Break handling
*/
case TIOCSBRK: /* Turn break on, unconditionally */
- tty->driver->break_ctl(tty, -1);
+ if (tty->ops->break_ctl)
+ tty->ops->break_ctl(tty, -1);
return 0;
case TIOCCBRK: /* Turn break off, unconditionally */
- tty->driver->break_ctl(tty, 0);
+ if (tty->ops->break_ctl)
+ tty->ops->break_ctl(tty, 0);
return 0;
case TCSBRK: /* SVID version: non-zero arg --> no break */
/* non-zero arg means wait for all output data
@@ -3487,8 +3544,8 @@ int tty_ioctl(struct inode *inode, struct file *file,
}
break;
}
- if (tty->driver->ioctl) {
- retval = (tty->driver->ioctl)(tty, file, cmd, arg);
+ if (tty->ops->ioctl) {
+ retval = (tty->ops->ioctl)(tty, file, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
@@ -3515,8 +3572,8 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
- if (tty->driver->compat_ioctl) {
- retval = (tty->driver->compat_ioctl)(tty, file, cmd, arg);
+ if (tty->ops->compat_ioctl) {
+ retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
@@ -3566,8 +3623,7 @@ void __do_SAK(struct tty_struct *tty)
tty_ldisc_flush(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
read_lock(&tasklist_lock);
/* Kill the entire session */
@@ -3773,19 +3829,32 @@ static void initialize_tty_struct(struct tty_struct *tty)
mutex_init(&tty->atomic_read_lock);
mutex_init(&tty->atomic_write_lock);
spin_lock_init(&tty->read_lock);
+ spin_lock_init(&tty->ctrl_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
}
-/*
- * The default put_char routine if the driver did not define one.
+/**
+ * tty_put_char - write one character to a tty
+ * @tty: tty
+ * @ch: character
+ *
+ * Write one byte to the tty using the provided put_char method
+ * if present. Returns the number of characters successfully output.
+ *
+ * Note: the specific put_char operation in the driver layer may go
+ * away soon. Don't call it directly, use this method
*/
-static void tty_default_put_char(struct tty_struct *tty, unsigned char ch)
+int tty_put_char(struct tty_struct *tty, unsigned char ch)
{
- tty->driver->write(tty, &ch, 1);
+ if (tty->ops->put_char)
+ return tty->ops->put_char(tty, ch);
+ return tty->ops->write(tty, &ch, 1);
}
+EXPORT_SYMBOL_GPL(tty_put_char);
+
static struct class *tty_class;
/**
@@ -3868,37 +3937,8 @@ void put_tty_driver(struct tty_driver *driver)
void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op)
{
- driver->open = op->open;
- driver->close = op->close;
- driver->write = op->write;
- driver->put_char = op->put_char;
- driver->flush_chars = op->flush_chars;
- driver->write_room = op->write_room;
- driver->chars_in_buffer = op->chars_in_buffer;
- driver->ioctl = op->ioctl;
- driver->compat_ioctl = op->compat_ioctl;
- driver->set_termios = op->set_termios;
- driver->throttle = op->throttle;
- driver->unthrottle = op->unthrottle;
- driver->stop = op->stop;
- driver->start = op->start;
- driver->hangup = op->hangup;
- driver->break_ctl = op->break_ctl;
- driver->flush_buffer = op->flush_buffer;
- driver->set_ldisc = op->set_ldisc;
- driver->wait_until_sent = op->wait_until_sent;
- driver->send_xchar = op->send_xchar;
- driver->read_proc = op->read_proc;
- driver->write_proc = op->write_proc;
- driver->tiocmget = op->tiocmget;
- driver->tiocmset = op->tiocmset;
-#ifdef CONFIG_CONSOLE_POLL
- driver->poll_init = op->poll_init;
- driver->poll_get_char = op->poll_get_char;
- driver->poll_put_char = op->poll_put_char;
-#endif
-}
-
+ driver->ops = op;
+};
EXPORT_SYMBOL(alloc_tty_driver);
EXPORT_SYMBOL(put_tty_driver);
@@ -3961,9 +4001,6 @@ int tty_register_driver(struct tty_driver *driver)
return error;
}
- if (!driver->put_char)
- driver->put_char = tty_default_put_char;
-
mutex_lock(&tty_mutex);
list_add(&driver->tty_drivers, &tty_drivers);
mutex_unlock(&tty_mutex);
@@ -4039,14 +4076,19 @@ void proc_clear_tty(struct task_struct *p)
}
EXPORT_SYMBOL(proc_clear_tty);
+/* Called under the sighand lock */
+
static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
{
if (tty) {
- /* We should not have a session or pgrp to here but.... */
+ unsigned long flags;
+ /* We should not have a session or pgrp to put here but.... */
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
put_pid(tty->session);
put_pid(tty->pgrp);
- tty->session = get_pid(task_session(tsk));
tty->pgrp = get_pid(task_pgrp(tsk));
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty->session = get_pid(task_session(tsk));
}
put_pid(tsk->signal->tty_old_pgrp);
tsk->signal->tty = tty;
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index f95a80b2265..b1a757a5ee2 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -39,6 +40,50 @@
#define TERMIOS_OLD 8
+int tty_chars_in_buffer(struct tty_struct *tty)
+{
+ if (tty->ops->chars_in_buffer)
+ return tty->ops->chars_in_buffer(tty);
+ else
+ return 0;
+}
+
+EXPORT_SYMBOL(tty_chars_in_buffer);
+
+int tty_write_room(struct tty_struct *tty)
+{
+ if (tty->ops->write_room)
+ return tty->ops->write_room(tty);
+ return 2048;
+}
+
+EXPORT_SYMBOL(tty_write_room);
+
+void tty_driver_flush_buffer(struct tty_struct *tty)
+{
+ if (tty->ops->flush_buffer)
+ tty->ops->flush_buffer(tty);
+}
+
+EXPORT_SYMBOL(tty_driver_flush_buffer);
+
+void tty_throttle(struct tty_struct *tty)
+{
+ /* check TTY_THROTTLED first so it indicates our state */
+ if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
+ tty->ops->throttle)
+ tty->ops->throttle(tty);
+}
+EXPORT_SYMBOL(tty_throttle);
+
+void tty_unthrottle(struct tty_struct *tty)
+{
+ if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
+ tty->ops->unthrottle)
+ tty->ops->unthrottle(tty);
+}
+EXPORT_SYMBOL(tty_unthrottle);
+
/**
* tty_wait_until_sent - wait for I/O to finish
* @tty: tty we are waiting for
@@ -57,15 +102,13 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout)
printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf));
#endif
- if (!tty->driver->chars_in_buffer)
- return;
if (!timeout)
timeout = MAX_SCHEDULE_TIMEOUT;
if (wait_event_interruptible_timeout(tty->write_wait,
- !tty->driver->chars_in_buffer(tty), timeout) < 0)
- return;
- if (tty->driver->wait_until_sent)
- tty->driver->wait_until_sent(tty, timeout);
+ !tty_chars_in_buffer(tty), timeout) >= 0) {
+ if (tty->ops->wait_until_sent)
+ tty->ops->wait_until_sent(tty, timeout);
+ }
}
EXPORT_SYMBOL(tty_wait_until_sent);
@@ -393,8 +436,9 @@ EXPORT_SYMBOL(tty_termios_hw_change);
static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
int canon_change;
- struct ktermios old_termios = *tty->termios;
+ struct ktermios old_termios;
struct tty_ldisc *ld;
+ unsigned long flags;
/*
* Perform the actual termios internal changes under lock.
@@ -404,7 +448,7 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
mutex_lock(&tty->termios_mutex);
-
+ old_termios = *tty->termios;
*tty->termios = *new_termios;
unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
canon_change = (old_termios.c_lflag ^ tty->termios->c_lflag) & ICANON;
@@ -429,17 +473,19 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
STOP_CHAR(tty) == '\023' &&
START_CHAR(tty) == '\021');
if (old_flow != new_flow) {
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
if (new_flow)
tty->ctrl_status |= TIOCPKT_DOSTOP;
else
tty->ctrl_status |= TIOCPKT_NOSTOP;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
wake_up_interruptible(&tty->link->read_wait);
}
}
- if (tty->driver->set_termios)
- (*tty->driver->set_termios)(tty, &old_termios);
+ if (tty->ops->set_termios)
+ (*tty->ops->set_termios)(tty, &old_termios);
else
tty_termios_copy_hw(tty->termios, &old_termios);
@@ -474,7 +520,9 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
if (retval)
return retval;
+ mutex_lock(&tty->termios_mutex);
memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios));
+ mutex_unlock(&tty->termios_mutex);
if (opt & TERMIOS_TERMIO) {
if (user_termio_to_kernel_termios(&tmp_termios,
@@ -660,12 +708,14 @@ static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars)
{
struct tchars tmp;
+ mutex_lock(&tty->termios_mutex);
tmp.t_intrc = tty->termios->c_cc[VINTR];
tmp.t_quitc = tty->termios->c_cc[VQUIT];
tmp.t_startc = tty->termios->c_cc[VSTART];
tmp.t_stopc = tty->termios->c_cc[VSTOP];
tmp.t_eofc = tty->termios->c_cc[VEOF];
tmp.t_brkc = tty->termios->c_cc[VEOL2]; /* what is brkc anyway? */
+ mutex_unlock(&tty->termios_mutex);
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -675,12 +725,14 @@ static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars)
if (copy_from_user(&tmp, tchars, sizeof(tmp)))
return -EFAULT;
+ mutex_lock(&tty->termios_mutex);
tty->termios->c_cc[VINTR] = tmp.t_intrc;
tty->termios->c_cc[VQUIT] = tmp.t_quitc;
tty->termios->c_cc[VSTART] = tmp.t_startc;
tty->termios->c_cc[VSTOP] = tmp.t_stopc;
tty->termios->c_cc[VEOF] = tmp.t_eofc;
tty->termios->c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
+ mutex_unlock(&tty->termios_mutex);
return 0;
}
#endif
@@ -690,6 +742,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
{
struct ltchars tmp;
+ mutex_lock(&tty->termios_mutex);
tmp.t_suspc = tty->termios->c_cc[VSUSP];
/* what is dsuspc anyway? */
tmp.t_dsuspc = tty->termios->c_cc[VSUSP];
@@ -698,6 +751,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
tmp.t_flushc = tty->termios->c_cc[VEOL2];
tmp.t_werasc = tty->termios->c_cc[VWERASE];
tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
+ mutex_unlock(&tty->termios_mutex);
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -708,6 +762,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
if (copy_from_user(&tmp, ltchars, sizeof(tmp)))
return -EFAULT;
+ mutex_lock(&tty->termios_mutex);
tty->termios->c_cc[VSUSP] = tmp.t_suspc;
/* what is dsuspc anyway? */
tty->termios->c_cc[VEOL2] = tmp.t_dsuspc;
@@ -716,6 +771,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
tty->termios->c_cc[VEOL2] = tmp.t_flushc;
tty->termios->c_cc[VWERASE] = tmp.t_werasc;
tty->termios->c_cc[VLNEXT] = tmp.t_lnextc;
+ mutex_unlock(&tty->termios_mutex);
return 0;
}
#endif
@@ -732,8 +788,8 @@ static int send_prio_char(struct tty_struct *tty, char ch)
{
int was_stopped = tty->stopped;
- if (tty->driver->send_xchar) {
- tty->driver->send_xchar(tty, ch);
+ if (tty->ops->send_xchar) {
+ tty->ops->send_xchar(tty, ch);
return 0;
}
@@ -742,7 +798,7 @@ static int send_prio_char(struct tty_struct *tty, char ch)
if (was_stopped)
start_tty(tty);
- tty->driver->write(tty, &ch, 1);
+ tty->ops->write(tty, &ch, 1);
if (was_stopped)
stop_tty(tty);
tty_write_unlock(tty);
@@ -750,6 +806,33 @@ static int send_prio_char(struct tty_struct *tty, char ch)
}
/**
+ * tty_change_softcar - carrier change ioctl helper
+ * @tty: tty to update
+ * @arg: enable/disable CLOCAL
+ *
+ * Perform a change to the CLOCAL state and call into the driver
+ * layer to make it visible. All done with the termios mutex
+ */
+
+static int tty_change_softcar(struct tty_struct *tty, int arg)
+{
+ int ret = 0;
+ int bit = arg ? CLOCAL : 0;
+ struct ktermios old;
+
+ mutex_lock(&tty->termios_mutex);
+ old = *tty->termios;
+ tty->termios->c_cflag &= ~CLOCAL;
+ tty->termios->c_cflag |= bit;
+ if (tty->ops->set_termios)
+ tty->ops->set_termios(tty, &old);
+ if ((tty->termios->c_cflag & CLOCAL) != bit)
+ ret = -EINVAL;
+ mutex_unlock(&tty->termios_mutex);
+ return ret;
+}
+
+/**
* tty_mode_ioctl - mode related ioctls
* @tty: tty for the ioctl
* @file: file pointer for the tty
@@ -859,12 +942,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
case TIOCSSOFTCAR:
if (get_user(arg, (unsigned int __user *) arg))
return -EFAULT;
- mutex_lock(&tty->termios_mutex);
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- mutex_unlock(&tty->termios_mutex);
- return 0;
+ return tty_change_softcar(tty, arg);
default:
return -ENOIOCTLCMD;
}
@@ -889,8 +967,7 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
ld->flush_buffer(tty);
/* fall through */
case TCOFLUSH:
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
break;
default:
tty_ldisc_deref(ld);
@@ -905,6 +982,7 @@ int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct tty_struct *real_tty;
+ unsigned long flags;
int retval;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -946,9 +1024,7 @@ int n_tty_ioctl(struct tty_struct *tty, struct file *file,
case TCFLSH:
return tty_perform_flush(tty, arg);
case TIOCOUTQ:
- return put_user(tty->driver->chars_in_buffer ?
- tty->driver->chars_in_buffer(tty) : 0,
- (int __user *) arg);
+ return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
retval = tty->read_cnt;
if (L_ICANON(tty))
@@ -963,6 +1039,7 @@ int n_tty_ioctl(struct tty_struct *tty, struct file *file,
return -ENOTTY;
if (get_user(pktmode, (int __user *) arg))
return -EFAULT;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
if (pktmode) {
if (!tty->packet) {
tty->packet = 1;
@@ -970,6 +1047,7 @@ int n_tty_ioctl(struct tty_struct *tty, struct file *file,
}
} else
tty->packet = 0;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
return 0;
}
default:
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c
index 8de6b95aeb8..3d3e1c2b310 100644
--- a/drivers/char/viocons.c
+++ b/drivers/char/viocons.c
@@ -628,13 +628,13 @@ static int viotty_write(struct tty_struct *tty, const unsigned char *buf,
/*
* TTY put_char method
*/
-static void viotty_put_char(struct tty_struct *tty, unsigned char ch)
+static int viotty_put_char(struct tty_struct *tty, unsigned char ch)
{
struct port_info *pi;
pi = get_port_data(tty);
if (pi == NULL)
- return;
+ return 0;
/* This will append '\r' as well if the char is '\n' */
if (viochar_is_console(pi))
@@ -642,6 +642,7 @@ static void viotty_put_char(struct tty_struct *tty, unsigned char ch)
if (viopath_isactive(pi->lp))
internal_write(pi, &ch, 1);
+ return 1;
}
/*
@@ -704,8 +705,11 @@ static int viotty_ioctl(struct tty_struct *tty, struct file *file,
case KDSKBLED:
return 0;
}
-
- return n_tty_ioctl(tty, file, cmd, arg);
+ /* FIXME: WTF is this being called for ??? */
+ lock_kernel();
+ ret = n_tty_ioctl(tty, file, cmd, arg);
+ unlock_kernel();
+ return ret;
}
/*
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index db7a731e236..58aad63831f 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -249,6 +249,7 @@ static int proc_viotape_open(struct inode *inode, struct file *file)
}
static const struct file_operations proc_viotape_operations = {
+ .owner = THIS_MODULE,
.open = proc_viotape_open,
.read = seq_read,
.llseek = seq_lseek,
@@ -915,7 +916,6 @@ static struct vio_driver viotape_driver = {
int __init viotap_init(void)
{
int ret;
- struct proc_dir_entry *e;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
@@ -968,11 +968,8 @@ int __init viotap_init(void)
if (ret)
goto unreg_class;
- e = create_proc_entry("iSeries/viotape", S_IFREG|S_IRUGO, NULL);
- if (e) {
- e->owner = THIS_MODULE;
- e->proc_fops = &proc_viotape_operations;
- }
+ proc_create("iSeries/viotape", S_IFREG|S_IRUGO, NULL,
+ &proc_viotape_operations);
return 0;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index df4c3ead9e2..e458b08139a 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -301,7 +301,7 @@ static void scrup(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
d = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * (t + nr));
scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
- scr_memsetw(d + (b - t - nr) * vc->vc_cols, vc->vc_video_erase_char,
+ scr_memsetw(d + (b - t - nr) * vc->vc_cols, vc->vc_scrl_erase_char,
vc->vc_size_row * nr);
}
@@ -319,7 +319,7 @@ static void scrdown(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
step = vc->vc_cols * nr;
scr_memmovew(s + step, s, (b - t - nr) * vc->vc_size_row);
- scr_memsetw(s, vc->vc_video_erase_char, 2 * step);
+ scr_memsetw(s, vc->vc_scrl_erase_char, 2 * step);
}
static void do_update_region(struct vc_data *vc, unsigned long start, int count)
@@ -400,7 +400,7 @@ static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink,
* Bit 7 : blink
*/
{
- u8 a = vc->vc_color;
+ u8 a = _color;
if (!vc->vc_can_do_color)
return _intensity |
(_italic ? 2 : 0) |
@@ -434,6 +434,7 @@ static void update_attr(struct vc_data *vc)
vc->vc_blink, vc->vc_underline,
vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic);
vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' ';
+ vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' ';
}
/* Note: inverting the screen twice should revert to the original state */
@@ -908,15 +909,21 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
if (vc->vc_tty) {
struct winsize ws, *cws = &vc->vc_tty->winsize;
+ unsigned long flags;
memset(&ws, 0, sizeof(ws));
ws.ws_row = vc->vc_rows;
ws.ws_col = vc->vc_cols;
ws.ws_ypixel = vc->vc_scan_lines;
+
+ mutex_lock(&vc->vc_tty->termios_mutex);
+ spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags);
if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) &&
vc->vc_tty->pgrp)
kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
+ spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags);
*cws = ws;
+ mutex_unlock(&vc->vc_tty->termios_mutex);
}
if (CON_IS_VISIBLE(vc))
@@ -2540,6 +2547,9 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
if (get_user(type, p))
return -EFAULT;
ret = 0;
+
+ lock_kernel();
+
switch (type)
{
case TIOCL_SETSEL:
@@ -2559,7 +2569,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
ret = sel_loadlut(p);
break;
case TIOCL_GETSHIFTSTATE:
-
+
/*
* Make it possible to react to Shift+Mousebutton.
* Note that 'shift_state' is an undocumented
@@ -2614,6 +2624,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
ret = -EINVAL;
break;
}
+ unlock_kernel();
return ret;
}
@@ -2631,11 +2642,11 @@ static int con_write(struct tty_struct *tty, const unsigned char *buf, int count
return retval;
}
-static void con_put_char(struct tty_struct *tty, unsigned char ch)
+static int con_put_char(struct tty_struct *tty, unsigned char ch)
{
if (in_interrupt())
- return; /* n_r3964 calls put_char() from interrupt context */
- do_con_write(tty, &ch, 1);
+ return 0; /* n_r3964 calls put_char() from interrupt context */
+ return do_con_write(tty, &ch, 1);
}
static int con_write_room(struct tty_struct *tty)
@@ -3828,7 +3839,7 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
goto out;
c = (font.width+7)/8 * 32 * font.charcount;
-
+
if (op->data && font.charcount > op->charcount)
rc = -ENOSPC;
if (!(op->flags & KD_FONT_FLAG_OLD)) {
@@ -3993,6 +4004,7 @@ u16 screen_glyph(struct vc_data *vc, int offset)
c |= 0x100;
return c;
}
+EXPORT_SYMBOL_GPL(screen_glyph);
/* used by vcs - note the word offset */
unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed)
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index e6f89e8b925..3211afd9d57 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -373,11 +373,17 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
unsigned char ucval;
void __user *up = (void __user *)arg;
int i, perm;
-
+ int ret = 0;
+
console = vc->vc_num;
- if (!vc_cons_allocated(console)) /* impossible? */
- return -ENOIOCTLCMD;
+ lock_kernel();
+
+ if (!vc_cons_allocated(console)) { /* impossible? */
+ ret = -ENOIOCTLCMD;
+ goto out;
+ }
+
/*
* To have permissions to do most of the vt ioctls, we either have
@@ -391,15 +397,15 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
switch (cmd) {
case KIOCSOUND:
if (!perm)
- return -EPERM;
+ goto eperm;
if (arg)
arg = CLOCK_TICK_RATE / arg;
kd_mksound(arg, 0);
- return 0;
+ break;
case KDMKTONE:
if (!perm)
- return -EPERM;
+ goto eperm;
{
unsigned int ticks, count;
@@ -412,7 +418,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
if (count)
count = CLOCK_TICK_RATE / count;
kd_mksound(count, ticks);
- return 0;
+ break;
}
case KDGKBTYPE:
@@ -435,14 +441,18 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
* KDADDIO and KDDELIO may be able to add ports beyond what
* we reject here, but to be safe...
*/
- if (arg < GPFIRST || arg > GPLAST)
- return -EINVAL;
- return sys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0;
+ if (arg < GPFIRST || arg > GPLAST) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = sys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0;
+ break;
case KDENABIO:
case KDDISABIO:
- return sys_ioperm(GPFIRST, GPNUM,
+ ret = sys_ioperm(GPFIRST, GPNUM,
(cmd == KDENABIO)) ? -ENXIO : 0;
+ break;
#endif
/* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */
@@ -450,19 +460,20 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
case KDKBDREP:
{
struct kbd_repeat kbrep;
- int err;
if (!capable(CAP_SYS_TTY_CONFIG))
- return -EPERM;
+ goto eperm;
- if (copy_from_user(&kbrep, up, sizeof(struct kbd_repeat)))
- return -EFAULT;
- err = kbd_rate(&kbrep);
- if (err)
- return err;
+ if (copy_from_user(&kbrep, up, sizeof(struct kbd_repeat))) {
+ ret = -EFAULT;
+ break;
+ }
+ ret = kbd_rate(&kbrep);
+ if (ret)
+ break;
if (copy_to_user(up, &kbrep, sizeof(struct kbd_repeat)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ break;
}
case KDSETMODE:
@@ -475,7 +486,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
* need to restore their engine state. --BenH
*/
if (!perm)
- return -EPERM;
+ goto eperm;
switch (arg) {
case KD_GRAPHICS:
break;
@@ -485,13 +496,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
case KD_TEXT:
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (vc->vc_mode == (unsigned char) arg)
- return 0;
+ break;
vc->vc_mode = (unsigned char) arg;
if (console != fg_console)
- return 0;
+ break;
/*
* explicitly blank/unblank the screen if switching modes
*/
@@ -501,7 +513,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
else
do_blank_screen(1);
release_console_sem();
- return 0;
+ break;
case KDGETMODE:
ucval = vc->vc_mode;
@@ -513,11 +525,12 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
* these work like a combination of mmap and KDENABIO.
* this could be easily finished.
*/
- return -EINVAL;
+ ret = -EINVAL;
+ break;
case KDSKBMODE:
if (!perm)
- return -EPERM;
+ goto eperm;
switch(arg) {
case K_RAW:
kbd->kbdmode = VC_RAW;
@@ -534,10 +547,11 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
compute_shiftstate();
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
tty_ldisc_flush(tty);
- return 0;
+ break;
case KDGKBMODE:
ucval = ((kbd->kbdmode == VC_RAW) ? K_RAW :
@@ -557,28 +571,32 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
set_vc_kbd_mode(kbd, VC_META);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ break;
case KDGKBMETA:
ucval = (vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT);
setint:
- return put_user(ucval, (int __user *)arg);
+ ret = put_user(ucval, (int __user *)arg);
+ break;
case KDGETKEYCODE:
case KDSETKEYCODE:
if(!capable(CAP_SYS_TTY_CONFIG))
- perm=0;
- return do_kbkeycode_ioctl(cmd, up, perm);
+ perm = 0;
+ ret = do_kbkeycode_ioctl(cmd, up, perm);
+ break;
case KDGKBENT:
case KDSKBENT:
- return do_kdsk_ioctl(cmd, up, perm, kbd);
+ ret = do_kdsk_ioctl(cmd, up, perm, kbd);
+ break;
case KDGKBSENT:
case KDSKBSENT:
- return do_kdgkb_ioctl(cmd, up, perm);
+ ret = do_kdgkb_ioctl(cmd, up, perm);
+ break;
case KDGKBDIACR:
{
@@ -586,26 +604,31 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
struct kbdiacr diacr;
int i;
- if (put_user(accent_table_size, &a->kb_cnt))
- return -EFAULT;
+ if (put_user(accent_table_size, &a->kb_cnt)) {
+ ret = -EFAULT;
+ break;
+ }
for (i = 0; i < accent_table_size; i++) {
diacr.diacr = conv_uni_to_8bit(accent_table[i].diacr);
diacr.base = conv_uni_to_8bit(accent_table[i].base);
diacr.result = conv_uni_to_8bit(accent_table[i].result);
- if (copy_to_user(a->kbdiacr + i, &diacr, sizeof(struct kbdiacr)))
- return -EFAULT;
+ if (copy_to_user(a->kbdiacr + i, &diacr, sizeof(struct kbdiacr))) {
+ ret = -EFAULT;
+ break;
+ }
}
- return 0;
+ break;
}
case KDGKBDIACRUC:
{
struct kbdiacrsuc __user *a = up;
if (put_user(accent_table_size, &a->kb_cnt))
- return -EFAULT;
- if (copy_to_user(a->kbdiacruc, accent_table, accent_table_size*sizeof(struct kbdiacruc)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ else if (copy_to_user(a->kbdiacruc, accent_table,
+ accent_table_size*sizeof(struct kbdiacruc)))
+ ret = -EFAULT;
+ break;
}
case KDSKBDIACR:
@@ -616,20 +639,26 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
int i;
if (!perm)
- return -EPERM;
- if (get_user(ct,&a->kb_cnt))
- return -EFAULT;
- if (ct >= MAX_DIACR)
- return -EINVAL;
+ goto eperm;
+ if (get_user(ct,&a->kb_cnt)) {
+ ret = -EFAULT;
+ break;
+ }
+ if (ct >= MAX_DIACR) {
+ ret = -EINVAL;
+ break;
+ }
accent_table_size = ct;
for (i = 0; i < ct; i++) {
- if (copy_from_user(&diacr, a->kbdiacr + i, sizeof(struct kbdiacr)))
- return -EFAULT;
+ if (copy_from_user(&diacr, a->kbdiacr + i, sizeof(struct kbdiacr))) {
+ ret = -EFAULT;
+ break;
+ }
accent_table[i].diacr = conv_8bit_to_uni(diacr.diacr);
accent_table[i].base = conv_8bit_to_uni(diacr.base);
accent_table[i].result = conv_8bit_to_uni(diacr.result);
}
- return 0;
+ break;
}
case KDSKBDIACRUC:
@@ -638,15 +667,19 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
unsigned int ct;
if (!perm)
- return -EPERM;
- if (get_user(ct,&a->kb_cnt))
- return -EFAULT;
- if (ct >= MAX_DIACR)
- return -EINVAL;
+ goto eperm;
+ if (get_user(ct,&a->kb_cnt)) {
+ ret = -EFAULT;
+ break;
+ }
+ if (ct >= MAX_DIACR) {
+ ret = -EINVAL;
+ break;
+ }
accent_table_size = ct;
if (copy_from_user(accent_table, a->kbdiacruc, ct*sizeof(struct kbdiacruc)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ break;
}
/* the ioctls below read/set the flags usually shown in the leds */
@@ -657,26 +690,29 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
case KDSKBLED:
if (!perm)
- return -EPERM;
- if (arg & ~0x77)
- return -EINVAL;
+ goto eperm;
+ if (arg & ~0x77) {
+ ret = -EINVAL;
+ break;
+ }
kbd->ledflagstate = (arg & 7);
kbd->default_ledflagstate = ((arg >> 4) & 7);
set_leds();
- return 0;
+ break;
/* the ioctls below only set the lights, not the functions */
/* for those, see KDGKBLED and KDSKBLED above */
case KDGETLED:
ucval = getledstate();
setchar:
- return put_user(ucval, (char __user *)arg);
+ ret = put_user(ucval, (char __user *)arg);
+ break;
case KDSETLED:
if (!perm)
- return -EPERM;
+ goto eperm;
setledstate(kbd, arg);
- return 0;
+ break;
/*
* A process can indicate its willingness to accept signals
@@ -688,16 +724,17 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
case KDSIGACCEPT:
{
if (!perm || !capable(CAP_KILL))
- return -EPERM;
+ goto eperm;
if (!valid_signal(arg) || arg < 1 || arg == SIGKILL)
- return -EINVAL;
-
- spin_lock_irq(&vt_spawn_con.lock);
- put_pid(vt_spawn_con.pid);
- vt_spawn_con.pid = get_pid(task_pid(current));
- vt_spawn_con.sig = arg;
- spin_unlock_irq(&vt_spawn_con.lock);
- return 0;
+ ret = -EINVAL;
+ else {
+ spin_lock_irq(&vt_spawn_con.lock);
+ put_pid(vt_spawn_con.pid);
+ vt_spawn_con.pid = get_pid(task_pid(current));
+ vt_spawn_con.sig = arg;
+ spin_unlock_irq(&vt_spawn_con.lock);
+ }
+ break;
}
case VT_SETMODE:
@@ -705,11 +742,15 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
struct vt_mode tmp;
if (!perm)
- return -EPERM;
- if (copy_from_user(&tmp, up, sizeof(struct vt_mode)))
- return -EFAULT;
- if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS)
- return -EINVAL;
+ goto eperm;
+ if (copy_from_user(&tmp, up, sizeof(struct vt_mode))) {
+ ret = -EFAULT;
+ goto out;
+ }
+ if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) {
+ ret = -EINVAL;
+ goto out;
+ }
acquire_console_sem();
vc->vt_mode = tmp;
/* the frsig is ignored, so we set it to 0 */
@@ -719,7 +760,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
/* no switch is required -- saw@shade.msu.ru */
vc->vt_newvt = -1;
release_console_sem();
- return 0;
+ break;
}
case VT_GETMODE:
@@ -732,7 +773,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
release_console_sem();
rc = copy_to_user(up, &tmp, sizeof(struct vt_mode));
- return rc ? -EFAULT : 0;
+ if (rc)
+ ret = -EFAULT;
+ break;
}
/*
@@ -746,12 +789,16 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
unsigned short state, mask;
if (put_user(fg_console + 1, &vtstat->v_active))
- return -EFAULT;
- state = 1; /* /dev/tty0 is always open */
- for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask; ++i, mask <<= 1)
- if (VT_IS_IN_USE(i))
- state |= mask;
- return put_user(state, &vtstat->v_state);
+ ret = -EFAULT;
+ else {
+ state = 1; /* /dev/tty0 is always open */
+ for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
+ ++i, mask <<= 1)
+ if (VT_IS_IN_USE(i))
+ state |= mask;
+ ret = put_user(state, &vtstat->v_state);
+ }
+ break;
}
/*
@@ -771,27 +818,31 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
*/
case VT_ACTIVATE:
if (!perm)
- return -EPERM;
+ goto eperm;
if (arg == 0 || arg > MAX_NR_CONSOLES)
- return -ENXIO;
- arg--;
- acquire_console_sem();
- i = vc_allocate(arg);
- release_console_sem();
- if (i)
- return i;
- set_console(arg);
- return 0;
+ ret = -ENXIO;
+ else {
+ arg--;
+ acquire_console_sem();
+ ret = vc_allocate(arg);
+ release_console_sem();
+ if (ret)
+ break;
+ set_console(arg);
+ }
+ break;
/*
* wait until the specified VT has been activated
*/
case VT_WAITACTIVE:
if (!perm)
- return -EPERM;
+ goto eperm;
if (arg == 0 || arg > MAX_NR_CONSOLES)
- return -ENXIO;
- return vt_waitactive(arg-1);
+ ret = -ENXIO;
+ else
+ ret = vt_waitactive(arg - 1);
+ break;
/*
* If a vt is under process control, the kernel will not switch to it
@@ -805,10 +856,12 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
*/
case VT_RELDISP:
if (!perm)
- return -EPERM;
- if (vc->vt_mode.mode != VT_PROCESS)
- return -EINVAL;
+ goto eperm;
+ if (vc->vt_mode.mode != VT_PROCESS) {
+ ret = -EINVAL;
+ break;
+ }
/*
* Switching-from response
*/
@@ -829,10 +882,10 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
int newvt;
newvt = vc->vt_newvt;
vc->vt_newvt = -1;
- i = vc_allocate(newvt);
- if (i) {
+ ret = vc_allocate(newvt);
+ if (ret) {
release_console_sem();
- return i;
+ break;
}
/*
* When we actually do the console switch,
@@ -841,31 +894,27 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
*/
complete_change_console(vc_cons[newvt].d);
}
- }
-
- /*
- * Switched-to response
- */
- else
- {
+ } else {
+ /*
+ * Switched-to response
+ */
/*
* If it's just an ACK, ignore it
*/
- if (arg != VT_ACKACQ) {
- release_console_sem();
- return -EINVAL;
- }
+ if (arg != VT_ACKACQ)
+ ret = -EINVAL;
}
release_console_sem();
-
- return 0;
+ break;
/*
* Disallocate memory associated to VT (but leave VT1)
*/
case VT_DISALLOCATE:
- if (arg > MAX_NR_CONSOLES)
- return -ENXIO;
+ if (arg > MAX_NR_CONSOLES) {
+ ret = -ENXIO;
+ break;
+ }
if (arg == 0) {
/* deallocate all unused consoles, but leave 0 */
acquire_console_sem();
@@ -877,14 +926,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
/* deallocate a single console, if possible */
arg--;
if (VT_BUSY(arg))
- return -EBUSY;
- if (arg) { /* leave 0 */
+ ret = -EBUSY;
+ else if (arg) { /* leave 0 */
acquire_console_sem();
vc_deallocate(arg);
release_console_sem();
}
}
- return 0;
+ break;
case VT_RESIZE:
{
@@ -893,21 +942,21 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
ushort ll,cc;
if (!perm)
- return -EPERM;
+ goto eperm;
if (get_user(ll, &vtsizes->v_rows) ||
get_user(cc, &vtsizes->v_cols))
- return -EFAULT;
-
- for (i = 0; i < MAX_NR_CONSOLES; i++) {
- vc = vc_cons[i].d;
+ ret = -EFAULT;
+ else {
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ vc = vc_cons[i].d;
- if (vc) {
- vc->vc_resize_user = 1;
- vc_lock_resize(vc_cons[i].d, cc, ll);
+ if (vc) {
+ vc->vc_resize_user = 1;
+ vc_lock_resize(vc_cons[i].d, cc, ll);
+ }
}
}
-
- return 0;
+ break;
}
case VT_RESIZEX:
@@ -915,10 +964,13 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
struct vt_consize __user *vtconsize = up;
ushort ll,cc,vlin,clin,vcol,ccol;
if (!perm)
- return -EPERM;
+ goto eperm;
if (!access_ok(VERIFY_READ, vtconsize,
- sizeof(struct vt_consize)))
- return -EFAULT;
+ sizeof(struct vt_consize))) {
+ ret = -EFAULT;
+ break;
+ }
+ /* FIXME: Should check the copies properly */
__get_user(ll, &vtconsize->v_rows);
__get_user(cc, &vtconsize->v_cols);
__get_user(vlin, &vtconsize->v_vlin);
@@ -928,21 +980,28 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
vlin = vlin ? vlin : vc->vc_scan_lines;
if (clin) {
if (ll) {
- if (ll != vlin/clin)
- return -EINVAL; /* Parameters don't add up */
+ if (ll != vlin/clin) {
+ /* Parameters don't add up */
+ ret = -EINVAL;
+ break;
+ }
} else
ll = vlin/clin;
}
if (vcol && ccol) {
if (cc) {
- if (cc != vcol/ccol)
- return -EINVAL;
+ if (cc != vcol/ccol) {
+ ret = -EINVAL;
+ break;
+ }
} else
cc = vcol/ccol;
}
- if (clin > 32)
- return -EINVAL;
+ if (clin > 32) {
+ ret = -EINVAL;
+ break;
+ }
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons[i].d)
@@ -956,19 +1015,20 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
vc_resize(vc_cons[i].d, cc, ll);
release_console_sem();
}
- return 0;
+ break;
}
case PIO_FONT: {
if (!perm)
- return -EPERM;
+ goto eperm;
op.op = KD_FONT_OP_SET;
op.flags = KD_FONT_FLAG_OLD | KD_FONT_FLAG_DONT_RECALC; /* Compatibility */
op.width = 8;
op.height = 0;
op.charcount = 256;
op.data = up;
- return con_font_op(vc_cons[fg_console].d, &op);
+ ret = con_font_op(vc_cons[fg_console].d, &op);
+ break;
}
case GIO_FONT: {
@@ -978,100 +1038,124 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
op.height = 32;
op.charcount = 256;
op.data = up;
- return con_font_op(vc_cons[fg_console].d, &op);
+ ret = con_font_op(vc_cons[fg_console].d, &op);
+ break;
}
case PIO_CMAP:
if (!perm)
- return -EPERM;
- return con_set_cmap(up);
+ ret = -EPERM;
+ else
+ ret = con_set_cmap(up);
+ break;
case GIO_CMAP:
- return con_get_cmap(up);
+ ret = con_get_cmap(up);
+ break;
case PIO_FONTX:
case GIO_FONTX:
- return do_fontx_ioctl(cmd, up, perm, &op);
+ ret = do_fontx_ioctl(cmd, up, perm, &op);
+ break;
case PIO_FONTRESET:
{
if (!perm)
- return -EPERM;
+ goto eperm;
#ifdef BROKEN_GRAPHICS_PROGRAMS
/* With BROKEN_GRAPHICS_PROGRAMS defined, the default
font is not saved. */
- return -ENOSYS;
+ ret = -ENOSYS;
+ break;
#else
{
op.op = KD_FONT_OP_SET_DEFAULT;
op.data = NULL;
- i = con_font_op(vc_cons[fg_console].d, &op);
- if (i)
- return i;
+ ret = con_font_op(vc_cons[fg_console].d, &op);
+ if (ret)
+ break;
con_set_default_unimap(vc_cons[fg_console].d);
- return 0;
+ break;
}
#endif
}
case KDFONTOP: {
- if (copy_from_user(&op, up, sizeof(op)))
- return -EFAULT;
+ if (copy_from_user(&op, up, sizeof(op))) {
+ ret = -EFAULT;
+ break;
+ }
if (!perm && op.op != KD_FONT_OP_GET)
- return -EPERM;
- i = con_font_op(vc, &op);
- if (i) return i;
+ goto eperm;
+ ret = con_font_op(vc, &op);
+ if (ret)
+ break;
if (copy_to_user(up, &op, sizeof(op)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ break;
}
case PIO_SCRNMAP:
if (!perm)
- return -EPERM;
- return con_set_trans_old(up);
+ ret = -EPERM;
+ else
+ ret = con_set_trans_old(up);
+ break;
case GIO_SCRNMAP:
- return con_get_trans_old(up);
+ ret = con_get_trans_old(up);
+ break;
case PIO_UNISCRNMAP:
if (!perm)
- return -EPERM;
- return con_set_trans_new(up);
+ ret = -EPERM;
+ else
+ ret = con_set_trans_new(up);
+ break;
case GIO_UNISCRNMAP:
- return con_get_trans_new(up);
+ ret = con_get_trans_new(up);
+ break;
case PIO_UNIMAPCLR:
{ struct unimapinit ui;
if (!perm)
- return -EPERM;
- i = copy_from_user(&ui, up, sizeof(struct unimapinit));
- if (i) return -EFAULT;
- con_clear_unimap(vc, &ui);
- return 0;
+ goto eperm;
+ ret = copy_from_user(&ui, up, sizeof(struct unimapinit));
+ if (!ret)
+ con_clear_unimap(vc, &ui);
+ break;
}
case PIO_UNIMAP:
case GIO_UNIMAP:
- return do_unimap_ioctl(cmd, up, perm, vc);
+ ret = do_unimap_ioctl(cmd, up, perm, vc);
+ break;
case VT_LOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
- return -EPERM;
+ goto eperm;
vt_dont_switch = 1;
- return 0;
+ break;
case VT_UNLOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
- return -EPERM;
+ goto eperm;
vt_dont_switch = 0;
- return 0;
+ break;
case VT_GETHIFONTMASK:
- return put_user(vc->vc_hi_font_mask, (unsigned short __user *)arg);
+ ret = put_user(vc->vc_hi_font_mask,
+ (unsigned short __user *)arg);
+ break;
default:
- return -ENOIOCTLCMD;
+ ret = -ENOIOCTLCMD;
}
+out:
+ unlock_kernel();
+ return ret;
+eperm:
+ ret = -EPERM;
+ goto out;
}
/*