diff options
Diffstat (limited to 'drivers/char')
-rw-r--r-- | drivers/char/Kconfig | 13 | ||||
-rw-r--r-- | drivers/char/Makefile | 1 | ||||
-rw-r--r-- | drivers/char/bfin_jtag_comm.c | 365 | ||||
-rw-r--r-- | drivers/char/cyclades.c | 290 | ||||
-rw-r--r-- | drivers/char/epca.c | 17 | ||||
-rw-r--r-- | drivers/char/ip2/i2lib.c | 4 | ||||
-rw-r--r-- | drivers/char/ip2/ip2main.c | 4 | ||||
-rw-r--r-- | drivers/char/isicom.c | 19 | ||||
-rw-r--r-- | drivers/char/istallion.c | 8 | ||||
-rw-r--r-- | drivers/char/moxa.c | 5 | ||||
-rw-r--r-- | drivers/char/mxser.c | 12 | ||||
-rw-r--r-- | drivers/char/n_hdlc.c | 4 | ||||
-rw-r--r-- | drivers/char/n_tty.c | 29 | ||||
-rw-r--r-- | drivers/char/pcmcia/synclink_cs.c | 11 | ||||
-rw-r--r-- | drivers/char/pty.c | 11 | ||||
-rw-r--r-- | drivers/char/raw.c | 2 | ||||
-rw-r--r-- | drivers/char/rocket.c | 19 | ||||
-rw-r--r-- | drivers/char/selection.c | 2 | ||||
-rw-r--r-- | drivers/char/stallion.c | 6 | ||||
-rw-r--r-- | drivers/char/synclink.c | 9 | ||||
-rw-r--r-- | drivers/char/synclink_gt.c | 86 | ||||
-rw-r--r-- | drivers/char/synclinkmp.c | 9 | ||||
-rw-r--r-- | drivers/char/tty_audit.c | 10 | ||||
-rw-r--r-- | drivers/char/tty_io.c | 122 | ||||
-rw-r--r-- | drivers/char/tty_ioctl.c | 88 | ||||
-rw-r--r-- | drivers/char/tty_ldisc.c | 549 | ||||
-rw-r--r-- | drivers/char/tty_port.c | 47 | ||||
-rw-r--r-- | drivers/char/vt.c | 8 |
28 files changed, 1164 insertions, 586 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 735bbe2be51..02ecfd5fa61 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -97,6 +97,19 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". +config BFIN_JTAG_COMM + tristate "Blackfin JTAG Communication" + depends on BLACKFIN + help + Add support for emulating a TTY device over the Blackfin JTAG. + + To compile this driver as a module, choose M here: the + module will be called bfin_jtag_comm. + +config BFIN_JTAG_COMM_CONSOLE + bool "Console on Blackfin JTAG" + depends on BFIN_JTAG_COMM=y + config SERIAL_NONSTANDARD bool "Non-standard serial port support" depends on HAS_IOMEM diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 9caf5b5ad1c..189efcff08c 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-y += misc.o obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o +obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c new file mode 100644 index 00000000000..44c113d5604 --- /dev/null +++ b/drivers/char/bfin_jtag_comm.c @@ -0,0 +1,365 @@ +/* + * TTY over Blackfin JTAG Communication + * + * Copyright 2008-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/circ_buf.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <asm/atomic.h> + +/* See the Debug/Emulation chapter in the HRM */ +#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ +#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ +#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ +#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ + +#define DRV_NAME "bfin-jtag-comm" +#define DEV_NAME "ttyBFJC" + +#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); }) +#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args) + +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d) +{ + return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24)); +} + +#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */ +#define CIRC_MASK (CIRC_SIZE - 1) +#define circ_empty(circ) ((circ)->head == (circ)->tail) +#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK]) + +static struct tty_driver *bfin_jc_driver; +static struct task_struct *bfin_jc_kthread; +static struct tty_struct * volatile bfin_jc_tty; +static unsigned long bfin_jc_count; +static DEFINE_MUTEX(bfin_jc_tty_mutex); +static volatile struct circ_buf bfin_jc_write_buf; + +static int +bfin_jc_emudat_manager(void *arg) +{ + uint32_t inbound_len = 0, outbound_len = 0; + + while (!kthread_should_stop()) { + /* no one left to give data to, so sleep */ + if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for readers\n"); + __set_current_state(TASK_UNINTERRUPTIBLE); + schedule(); + __set_current_state(TASK_RUNNING); + } + + /* no data available, so just chill */ + if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for data (in_len = %i) (circ: %i %i)\n", + inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head); + if (inbound_len) + schedule(); + else + schedule_timeout_interruptible(HZ); + continue; + } + + /* if incoming data is ready, eat it */ + if (bfin_read_DBGSTAT() & EMUDIF) { + struct tty_struct *tty; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty != NULL) { + uint32_t emudat = bfin_read_emudat(); + if (inbound_len == 0) { + debug("incoming length: 0x%08x\n", emudat); + inbound_len = emudat; + } else { + size_t num_chars = (4 <= inbound_len ? 4 : inbound_len); + debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars); + inbound_len -= num_chars; + tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars); + tty_flip_buffer_push(tty); + } + } + mutex_unlock(&bfin_jc_tty_mutex); + } + + /* if outgoing data is ready, post it */ + if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) { + if (outbound_len == 0) { + outbound_len = circ_cnt(&bfin_jc_write_buf); + bfin_write_emudat(outbound_len); + debug("outgoing length: 0x%08x\n", outbound_len); + } else { + struct tty_struct *tty; + int tail = bfin_jc_write_buf.tail; + size_t ate = (4 <= outbound_len ? 4 : outbound_len); + uint32_t emudat = + bfin_write_emudat_chars( + circ_byte(&bfin_jc_write_buf, tail + 0), + circ_byte(&bfin_jc_write_buf, tail + 1), + circ_byte(&bfin_jc_write_buf, tail + 2), + circ_byte(&bfin_jc_write_buf, tail + 3) + ); + bfin_jc_write_buf.tail += ate; + outbound_len -= ate; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty) + tty_wakeup(tty); + mutex_unlock(&bfin_jc_tty_mutex); + debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate); + } + } + } + + __set_current_state(TASK_RUNNING); + return 0; +} + +static int +bfin_jc_open(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + debug("open %lu\n", bfin_jc_count); + ++bfin_jc_count; + bfin_jc_tty = tty; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); + return 0; +} + +static void +bfin_jc_close(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + debug("close %lu\n", bfin_jc_count); + if (--bfin_jc_count == 0) + bfin_jc_tty = NULL; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); +} + +/* XXX: we dont handle the put_char() case where we must handle count = 1 */ +static int +bfin_jc_circ_write(const unsigned char *buf, int count) +{ + int i; + count = min(count, circ_free(&bfin_jc_write_buf)); + debug("going to write chunk of %i bytes\n", count); + for (i = 0; i < count; ++i) + circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i]; + bfin_jc_write_buf.head += i; + return i; +} + +#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE +# define acquire_console_sem() +# define release_console_sem() +#endif +static int +bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int i; + acquire_console_sem(); + i = bfin_jc_circ_write(buf, count); + release_console_sem(); + wake_up_process(bfin_jc_kthread); + return i; +} + +static void +bfin_jc_flush_chars(struct tty_struct *tty) +{ + wake_up_process(bfin_jc_kthread); +} + +static int +bfin_jc_write_room(struct tty_struct *tty) +{ + return circ_free(&bfin_jc_write_buf); +} + +static int +bfin_jc_chars_in_buffer(struct tty_struct *tty) +{ + return circ_cnt(&bfin_jc_write_buf); +} + +static void +bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) +{ + unsigned long expire = jiffies + timeout; + while (!circ_empty(&bfin_jc_write_buf)) { + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} + +static struct tty_operations bfin_jc_ops = { + .open = bfin_jc_open, + .close = bfin_jc_close, + .write = bfin_jc_write, + /*.put_char = bfin_jc_put_char,*/ + .flush_chars = bfin_jc_flush_chars, + .write_room = bfin_jc_write_room, + .chars_in_buffer = bfin_jc_chars_in_buffer, + .wait_until_sent = bfin_jc_wait_until_sent, +}; + +static int __init bfin_jc_init(void) +{ + int ret; + + bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME); + if (IS_ERR(bfin_jc_kthread)) + return PTR_ERR(bfin_jc_kthread); + + ret = -ENOMEM; + + bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0; + bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL); + if (!bfin_jc_write_buf.buf) + goto err; + + bfin_jc_driver = alloc_tty_driver(1); + if (!bfin_jc_driver) + goto err; + + bfin_jc_driver->owner = THIS_MODULE; + bfin_jc_driver->driver_name = DRV_NAME; + bfin_jc_driver->name = DEV_NAME; + bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; + bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL; + bfin_jc_driver->init_termios = tty_std_termios; + tty_set_operations(bfin_jc_driver, &bfin_jc_ops); + + ret = tty_register_driver(bfin_jc_driver); + if (ret) + goto err; + + pr_init(KERN_INFO DRV_NAME ": initialized\n"); + + return 0; + + err: + put_tty_driver(bfin_jc_driver); + kfree(bfin_jc_write_buf.buf); + kthread_stop(bfin_jc_kthread); + return ret; +} +module_init(bfin_jc_init); + +static void __exit bfin_jc_exit(void) +{ + kthread_stop(bfin_jc_kthread); + kfree(bfin_jc_write_buf.buf); + tty_unregister_driver(bfin_jc_driver); + put_tty_driver(bfin_jc_driver); +} +module_exit(bfin_jc_exit); + +#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +static void +bfin_jc_straight_buffer_write(const char *buf, unsigned count) +{ + unsigned ate = 0; + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat(count); + while (ate < count) { + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]); + ate += 4; + } +} +#endif + +#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE +static void +bfin_jc_console_write(struct console *co, const char *buf, unsigned count) +{ + if (bfin_jc_kthread == NULL) + bfin_jc_straight_buffer_write(buf, count); + else + bfin_jc_circ_write(buf, count); +} + +static struct tty_driver * +bfin_jc_console_device(struct console *co, int *index) +{ + *index = co->index; + return bfin_jc_driver; +} + +static struct console bfin_jc_console = { + .name = DEV_NAME, + .write = bfin_jc_console_write, + .device = bfin_jc_console_device, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +static int __init bfin_jc_console_init(void) +{ + register_console(&bfin_jc_console); + return 0; +} +console_initcall(bfin_jc_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +static void __init +bfin_jc_early_write(struct console *co, const char *buf, unsigned int count) +{ + bfin_jc_straight_buffer_write(buf, count); +} + +static struct __initdata console bfin_jc_early_console = { + .name = "early_BFJC", + .write = bfin_jc_early_write, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +struct console * __init +bfin_jc_early_init(unsigned int port, unsigned int cflag) +{ + return &bfin_jc_early_console; +} +#endif + +MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>"); +MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 1fdb9f657d8..f3366d3f06c 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -604,7 +604,6 @@ #define NR_PORTS 256 -#define ZE_V1_NPORTS 64 #define ZO_V1 0 #define ZO_V2 1 #define ZE_V1 2 @@ -663,18 +662,6 @@ static void cy_throttle(struct tty_struct *tty); static void cy_send_xchar(struct tty_struct *tty, char ch); -#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1) - -#define Z_FPGA_CHECK(card) \ - ((readl(&((struct RUNTIME_9060 __iomem *) \ - ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) - -#define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \ - ((card).ctl_addr))->mail_box_0)) || \ - Z_FPGA_CHECK(card)) && \ - (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ - ((card).base_addr+ID_ADDRESS))->signature))) - #ifndef SERIAL_XMIT_SIZE #define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) #endif @@ -687,8 +674,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define DRIVER_VERSION 0x02010203 #define RAM_SIZE 0x80000 -#define Z_FPGA_LOADED(X) ((readl(&(X)->init_ctrl) & (1<<17)) != 0) - enum zblock_type { ZBLOCK_PRG = 0, ZBLOCK_FPGA = 1 @@ -883,6 +868,29 @@ static void cyz_rx_restart(unsigned long); static struct timer_list cyz_rx_full_timer[NR_PORTS]; #endif /* CONFIG_CYZ_INTR */ +static inline bool cy_is_Z(struct cyclades_card *card) +{ + return card->num_chips == (unsigned int)-1; +} + +static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr) +{ + return readl(&ctl_addr->init_ctrl) & (1 << 17); +} + +static inline bool cyz_fpga_loaded(struct cyclades_card *card) +{ + return __cyz_fpga_loaded(card->ctl_addr.p9060); +} + +static inline bool cyz_is_loaded(struct cyclades_card *card) +{ + struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS; + + return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) && + readl(&fw_id->signature) == ZFIRM_ID; +} + static inline int serial_paranoia_check(struct cyclades_port *info, char *name, const char *routine) { @@ -1395,19 +1403,15 @@ cyz_fetch_msg(struct cyclades_card *cinfo, unsigned long loc_doorbell; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) - return -1; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; - loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->loc_doorbell); + loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell); if (loc_doorbell) { *cmd = (char)(0xff & loc_doorbell); *channel = readl(&board_ctrl->fwcmd_channel); *param = (__u32) readl(&board_ctrl->fwcmd_param); - cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> - loc_doorbell, 0xffffffff); + cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff); return 1; } return 0; @@ -1424,15 +1428,14 @@ cyz_issue_cmd(struct cyclades_card *cinfo, unsigned int index; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) + if (!cyz_is_loaded(cinfo)) return -1; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; index = 0; - pci_doorbell = - &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; + pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell; while ((readl(pci_doorbell) & 0xff) != 0) { if (index++ == 1000) return (int)(readl(pci_doorbell) & 0xff); @@ -1624,10 +1627,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) static struct BOARD_CTRL __iomem *board_ctrl; static struct CH_CTRL __iomem *ch_ctrl; static struct BUF_CTRL __iomem *buf_ctrl; - __u32 channel; + __u32 channel, param, fw_ver; __u8 cmd; - __u32 param; - __u32 hw_ver, fw_ver; int special_count; int delta_count; @@ -1635,8 +1636,6 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; fw_ver = readl(&board_ctrl->fw_version); - hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> - mail_box_0); while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { special_count = 0; @@ -1737,15 +1736,7 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id) { struct cyclades_card *cinfo = dev_id; - if (unlikely(cinfo == NULL)) { -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n", - irq); -#endif - return IRQ_NONE; /* spurious interrupt */ - } - - if (unlikely(!ISZLOADED(*cinfo))) { + if (unlikely(!cyz_is_loaded(cinfo))) { #ifdef CY_DEBUG_INTERRUPTS printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " "(IRQ%d).\n", irq); @@ -1785,7 +1776,6 @@ static void cyz_poll(unsigned long arg) struct tty_struct *tty; struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; struct BUF_CTRL __iomem *buf_ctrl; unsigned long expires = jiffies + HZ; unsigned int port, card; @@ -1793,19 +1783,17 @@ static void cyz_poll(unsigned long arg) for (card = 0; card < NR_CARDS; card++) { cinfo = &cy_card[card]; - if (!IS_CYC_Z(*cinfo)) + if (!cy_is_Z(cinfo)) continue; - if (!ISZLOADED(*cinfo)) + if (!cyz_is_loaded(cinfo)) continue; firm_id = cinfo->base_addr + ID_ADDRESS; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &(zfw_ctrl->board_ctrl); /* Skip first polling cycle to avoid racing conditions with the FW */ if (!cinfo->intr_enabled) { - cinfo->nports = (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; continue; } @@ -1874,7 +1862,7 @@ static int startup(struct cyclades_port *info) set_line_char(info); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -1931,7 +1919,7 @@ static int startup(struct cyclades_port *info) base_addr = card->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return -ENODEV; zfw_ctrl = card->base_addr + @@ -2026,7 +2014,7 @@ static void start_xmit(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2070,7 +2058,7 @@ static void shutdown(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2126,7 +2114,7 @@ static void shutdown(struct cyclades_port *info) #endif firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return; zfw_ctrl = card->base_addr + @@ -2233,7 +2221,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, #endif info->port.blocked_open++; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { chip = channel >> 2; channel &= 0x03; index = cinfo->bus_index; @@ -2296,7 +2284,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, base_addr = cinfo->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { + if (!cyz_is_loaded(cinfo)) { __set_current_state(TASK_RUNNING); remove_wait_queue(&info->port.open_wait, &wait); return -EINVAL; @@ -2397,16 +2385,14 @@ static int cy_open(struct tty_struct *tty, struct file *filp) treat it as absent from the system. This will make the user pay attention. */ - if (IS_CYC_Z(*info->card)) { + if (cy_is_Z(info->card)) { struct cyclades_card *cinfo = info->card; struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { - if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->mail_box_0)) && - Z_FPGA_CHECK(*cinfo)) && - (ZFIRM_HLT == readl( - &firm_id->signature))) { + if (!cyz_is_loaded(cinfo)) { + if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) && + readl(&firm_id->signature) == + ZFIRM_HLT) { printk(KERN_ERR "cyc:Cyclades-Z Error: you " "need an external power supply for " "this number of ports.\nFirmware " @@ -2423,18 +2409,13 @@ static int cy_open(struct tty_struct *tty, struct file *filp) interrupts should be enabled as soon as the first open happens to one of its ports. */ if (!cinfo->intr_enabled) { - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; - - zfw_ctrl = cinfo->base_addr + - (readl(&firm_id->zfwctrl_addr) & - 0xfffff); - - board_ctrl = &zfw_ctrl->board_ctrl; + u16 intr; /* Enable interrupts on the PLX chip */ - cy_writew(cinfo->ctl_addr + 0x68, - readw(cinfo->ctl_addr + 0x68) | 0x0900); + intr = readw(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat) | 0x0900; + cy_writew(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat, intr); /* Enable interrupts on the FW */ retval = cyz_issue_cmd(cinfo, 0, C_CM_IRQ_ENBL, 0L); @@ -2442,8 +2423,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp) printk(KERN_ERR "cyc:IRQ enable retval " "was %x\n", retval); } - cinfo->nports = - (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; } } @@ -2556,7 +2535,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) #endif card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2601,7 +2580,7 @@ static void cy_flush_buffer(struct tty_struct *tty) info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; spin_unlock_irqrestore(&card->card_lock, flags); - if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board + if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board buffers as well */ spin_lock_irqsave(&card->card_lock, flags); retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); @@ -2682,7 +2661,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp) spin_lock_irqsave(&card->card_lock, flags); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { int channel = info->line - card->first_line; int index = card->bus_index; void __iomem *base_addr = card->base_addr + @@ -2902,7 +2881,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty) channel = (info->line) - (card->first_line); #ifdef Z_EXT_CHARS_IN_BUFFER - if (!IS_CYC_Z(cy_card[card])) { + if (!cy_is_Z(card)) { #endif /* Z_EXT_CHARS_IN_BUFFER */ #ifdef CY_DEBUG_IO printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", @@ -2984,7 +2963,6 @@ static void set_line_char(struct cyclades_port *info) void __iomem *base_addr; int chip, channel, index; unsigned cflag, iflag; - unsigned short chip_number; int baud, baud_rate = 0; int i; @@ -3013,9 +2991,8 @@ static void set_line_char(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - chip_number = channel / 4; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { index = card->bus_index; @@ -3233,21 +3210,17 @@ static void set_line_char(struct cyclades_port *info) } else { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; struct CH_CTRL __iomem *ch_ctrl; - struct BUF_CTRL __iomem *buf_ctrl; __u32 sw_flow; int retval; firm_id = card->base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return; zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); - buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; /* baud rate */ baud = tty_get_baud_rate(info->port.tty); @@ -3457,7 +3430,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3497,7 +3470,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3523,7 +3496,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) } else { base_addr = card->base_addr; firm_id = card->base_addr + ID_ADDRESS; - if (ISZLOADED(*card)) { + if (cyz_is_loaded(card)) { zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -3566,7 +3539,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3641,7 +3614,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, base_addr = card->base_addr; firm_id = card->base_addr + ID_ADDRESS; - if (ISZLOADED(*card)) { + if (cyz_is_loaded(card)) { zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -3713,7 +3686,7 @@ static int cy_break(struct tty_struct *tty, int break_state) card = info->card; spin_lock_irqsave(&card->card_lock, flags); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { /* Let the transmit ISR take care of this (since it requires stuffing characters into the output stream). */ @@ -3782,7 +3755,7 @@ static int set_threshold(struct cyclades_port *info, unsigned long value) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3810,7 +3783,7 @@ static int get_threshold(struct cyclades_port *info, card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3844,7 +3817,7 @@ static int set_timeout(struct cyclades_port *info, unsigned long value) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3867,7 +3840,7 @@ static int get_timeout(struct cyclades_port *info, card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4121,7 +4094,7 @@ static void cy_send_xchar(struct tty_struct *tty, char ch) card = info->card; channel = info->line - card->first_line; - if (IS_CYC_Z(*card)) { + if (cy_is_Z(card)) { if (ch == STOP_CHAR(tty)) cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); else if (ch == START_CHAR(tty)) @@ -4154,7 +4127,7 @@ static void cy_throttle(struct tty_struct *tty) card = info->card; if (I_IXOFF(tty)) { - if (!IS_CYC_Z(*card)) + if (!cy_is_Z(card)) cy_send_xchar(tty, STOP_CHAR(tty)); else info->throttle = 1; @@ -4162,7 +4135,7 @@ static void cy_throttle(struct tty_struct *tty) if (tty->termios->c_cflag & CRTSCTS) { channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4219,7 +4192,7 @@ static void cy_unthrottle(struct tty_struct *tty) if (tty->termios->c_cflag & CRTSCTS) { card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4263,7 +4236,7 @@ static void cy_stop(struct tty_struct *tty) cinfo = info->card; channel = info->line - cinfo->first_line; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { index = cinfo->bus_index; chip = channel >> 2; channel &= 0x03; @@ -4296,7 +4269,7 @@ static void cy_start(struct tty_struct *tty) cinfo = info->card; channel = info->line - cinfo->first_line; index = cinfo->bus_index; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { chip = channel >> 2; channel &= 0x03; base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); @@ -4347,33 +4320,20 @@ static void cy_hangup(struct tty_struct *tty) static int __devinit cy_init_card(struct cyclades_card *cinfo) { struct cyclades_port *info; - u32 uninitialized_var(mailbox); - unsigned int nports, port; + unsigned int port; unsigned short chip_number; - int uninitialized_var(index); spin_lock_init(&cinfo->card_lock); + cinfo->intr_enabled = 0; - if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ - mailbox = readl(&((struct RUNTIME_9060 __iomem *) - cinfo->ctl_addr)->mail_box_0); - nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; - cinfo->intr_enabled = 0; - cinfo->nports = 0; /* Will be correctly set later, after - Z FW is loaded */ - } else { - index = cinfo->bus_index; - nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; - } - - cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL); + cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports), + GFP_KERNEL); if (cinfo->ports == NULL) { printk(KERN_ERR "Cyclades: cannot allocate ports\n"); - cinfo->nports = 0; return -ENOMEM; } - for (port = cinfo->first_line; port < cinfo->first_line + nports; + for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports; port++) { info = &cinfo->ports[port - cinfo->first_line]; tty_port_init(&info->port); @@ -4387,9 +4347,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) init_completion(&info->shutdown_wait); init_waitqueue_head(&info->delta_msr_wait); - if (IS_CYC_Z(*cinfo)) { + if (cy_is_Z(cinfo)) { info->type = PORT_STARTECH; - if (mailbox == ZO_V1) + if (cinfo->hw_ver == ZO_V1) info->xmit_fifo_size = CYZ_FIFO_SIZE; else info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; @@ -4398,6 +4358,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) cyz_rx_restart, (unsigned long)info); #endif } else { + int index = cinfo->bus_index; info->type = PORT_CIRRUS; info->xmit_fifo_size = CyMAX_CHAR_FIFO; info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; @@ -4430,7 +4391,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) } #ifndef CONFIG_CYZ_INTR - if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) { + if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) { mod_timer(&cyz_timerlist, jiffies + 1); #ifdef CY_PCI_DEBUG printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); @@ -4621,11 +4582,12 @@ static int __init cy_detect_isa(void) /* set cy_card */ cy_card[j].base_addr = cy_isa_address; - cy_card[j].ctl_addr = NULL; + cy_card[j].ctl_addr.p9050 = NULL; cy_card[j].irq = (int)cy_isa_irq; cy_card[j].bus_index = 0; cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_isa_nchan / 4; + cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; + cy_card[j].nports = cy_isa_nchan; if (cy_init_card(&cy_card[j])) { cy_card[j].base_addr = NULL; free_irq(cy_isa_irq, &cy_card[j]); @@ -4781,7 +4743,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, struct CUSTOM_REG __iomem *cust = base_addr; struct ZFW_CTRL __iomem *pt_zfwctrl; void __iomem *tmp; - u32 mailbox, status; + u32 mailbox, status, nchan; unsigned int i; int retval; @@ -4793,7 +4755,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, /* Check whether the firmware is already loaded and running. If positive, skip this board */ - if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { + if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { u32 cntval = readl(base_addr + 0x190); udelay(100); @@ -4812,7 +4774,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, mailbox = readl(&ctl_addr->mail_box_0); - if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) { + if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) { /* stops CPU and set window to beginning of RAM */ cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); cy_writel(&cust->cpu_stop, 0); @@ -4828,7 +4790,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, base_addr); if (retval) goto err_rel; - if (!Z_FPGA_LOADED(ctl_addr)) { + if (!__cyz_fpga_loaded(ctl_addr)) { dev_err(&pdev->dev, "fw upload successful, but fw is " "not loaded\n"); goto err_rel; @@ -4887,7 +4849,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, "system before loading the new FW to the " "Cyclades-Z.\n"); - if (Z_FPGA_LOADED(ctl_addr)) + if (__cyz_fpga_loaded(ctl_addr)) plx_init(pdev, irq, ctl_addr); retval = -EIO; @@ -4902,16 +4864,16 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), base_addr + readl(&fid->zfwctrl_addr)); + nchan = readl(&pt_zfwctrl->board_ctrl.n_channel); dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", - readl(&pt_zfwctrl->board_ctrl.fw_version), - readl(&pt_zfwctrl->board_ctrl.n_channel)); + readl(&pt_zfwctrl->board_ctrl.fw_version), nchan); - if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) { + if (nchan == 0) { dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " "check the connection between the Z host card and the " "serial expanders.\n"); - if (Z_FPGA_LOADED(ctl_addr)) + if (__cyz_fpga_loaded(ctl_addr)) plx_init(pdev, irq, ctl_addr); dev_info(&pdev->dev, "Null number of ports detected. Board " @@ -4932,9 +4894,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | 0x00030800UL); - plx_init(pdev, irq, ctl_addr); - - return 0; + return nchan; err_rel: release_firmware(fw); err: @@ -4946,7 +4906,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, { void __iomem *addr0 = NULL, *addr2 = NULL; char *card_name = NULL; - u32 mailbox; + u32 uninitialized_var(mailbox); unsigned int device_id, nchan = 0, card_no, i; unsigned char plx_ver; int retval, irq; @@ -5023,11 +4983,12 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } /* Disable interrupts on the PLX before resetting it */ - cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) & ~0x0900); plx_init(pdev, irq, addr0); - mailbox = (u32)readl(&ctl_addr->mail_box_0); + mailbox = readl(&ctl_addr->mail_box_0); addr2 = ioremap_nocache(pci_resource_start(pdev, 2), mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin); @@ -5038,12 +4999,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (mailbox == ZE_V1) { card_name = "Cyclades-Ze"; - - readl(&ctl_addr->mail_box_0); - nchan = ZE_V1_NPORTS; } else { card_name = "Cyclades-8Zo"; - #ifdef CY_PCI_DEBUG if (mailbox == ZO_V1) { cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); @@ -5065,15 +5022,12 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, */ if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) cy_writel(addr2 + ID_ADDRESS, 0L); - - retval = cyz_load_fw(pdev, addr2, addr0, irq); - if (retval) - goto err_unmap; - /* This must be a Cyclades-8Zo/PCI. The extendable - version will have a different device_id and will - be allocated its maximum number of ports. */ - nchan = 8; } + + retval = cyz_load_fw(pdev, addr2, addr0, irq); + if (retval <= 0) + goto err_unmap; + nchan = retval; } if ((cy_next_channel + nchan) > NR_PORTS) { @@ -5103,8 +5057,10 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "could not allocate IRQ\n"); goto err_unmap; } - cy_card[card_no].num_chips = nchan / 4; + cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP; } else { + cy_card[card_no].hw_ver = mailbox; + cy_card[card_no].num_chips = (unsigned int)-1; #ifdef CONFIG_CYZ_INTR /* allocate IRQ only if board has an IRQ */ if (irq != 0 && irq != 255) { @@ -5117,15 +5073,15 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } } #endif /* CONFIG_CYZ_INTR */ - cy_card[card_no].num_chips = (unsigned int)-1; } /* set cy_card */ cy_card[card_no].base_addr = addr2; - cy_card[card_no].ctl_addr = addr0; + cy_card[card_no].ctl_addr.p9050 = addr0; cy_card[card_no].irq = irq; cy_card[card_no].bus_index = 1; cy_card[card_no].first_line = cy_next_channel; + cy_card[card_no].nports = nchan; retval = cy_init_card(&cy_card[card_no]); if (retval) goto err_null; @@ -5138,17 +5094,20 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; switch (plx_ver) { case PLX_9050: - cy_writeb(addr0 + 0x4c, 0x43); break; case PLX_9060: case PLX_9080: default: /* Old boards, use PLX_9060 */ - plx_init(pdev, irq, addr0); - cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900); + { + struct RUNTIME_9060 __iomem *ctl_addr = addr0; + plx_init(pdev, irq, ctl_addr); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) | 0x0900); break; } + } } dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " @@ -5179,22 +5138,23 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) unsigned int i; /* non-Z with old PLX */ - if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == + if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == PLX_9050) - cy_writeb(cinfo->ctl_addr + 0x4c, 0); + cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); else #ifndef CONFIG_CYZ_INTR - if (!IS_CYC_Z(*cinfo)) + if (!cy_is_Z(cinfo)) #endif - cy_writew(cinfo->ctl_addr + 0x68, - readw(cinfo->ctl_addr + 0x68) & ~0x0900); + cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, + readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & + ~0x0900); iounmap(cinfo->base_addr); - if (cinfo->ctl_addr) - iounmap(cinfo->ctl_addr); + if (cinfo->ctl_addr.p9050) + iounmap(cinfo->ctl_addr.p9050); if (cinfo->irq #ifndef CONFIG_CYZ_INTR - && !IS_CYC_Z(*cinfo) + && !cy_is_Z(cinfo) #endif /* CONFIG_CYZ_INTR */ ) free_irq(cinfo->irq, cinfo); @@ -5240,7 +5200,7 @@ static int cyclades_proc_show(struct seq_file *m, void *v) (cur_jifs - info->idle_stats.recv_idle)/ HZ, info->idle_stats.overruns, /* FIXME: double check locking */ - (long)info->port.tty->ldisc.ops->num); + (long)info->port.tty->ldisc->ops->num); else seq_printf(m, "%3d %8lu %10lu %8lu " "%10lu %8lu %9lu %6ld\n", @@ -5386,11 +5346,11 @@ static void __exit cy_cleanup_module(void) /* clear interrupt */ cy_writeb(card->base_addr + Cy_ClrIntr, 0); iounmap(card->base_addr); - if (card->ctl_addr) - iounmap(card->ctl_addr); + if (card->ctl_addr.p9050) + iounmap(card->ctl_addr.p9050); if (card->irq #ifndef CONFIG_CYZ_INTR - && !IS_CYC_Z(*card) + && !cy_is_Z(card) #endif /* CONFIG_CYZ_INTR */ ) free_irq(card->irq, card); diff --git a/drivers/char/epca.c b/drivers/char/epca.c index af7c13ca949..abef1f7d84f 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -745,7 +745,7 @@ static int epca_carrier_raised(struct tty_port *port) return 0; } -static void epca_raise_dtr_rts(struct tty_port *port) +static void epca_dtr_rts(struct tty_port *port, int onoff) { } @@ -925,7 +925,7 @@ static const struct tty_operations pc_ops = { static const struct tty_port_operations epca_port_ops = { .carrier_raised = epca_carrier_raised, - .raise_dtr_rts = epca_raise_dtr_rts, + .dtr_rts = epca_dtr_rts, }; static int info_open(struct tty_struct *tty, struct file *filp) @@ -1518,7 +1518,7 @@ static void doevent(int crd) if (event & MODEMCHG_IND) { /* A modem signal change has been indicated */ ch->imodem = mstat; - if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) { + if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) { /* We are now receiving dcd */ if (mstat & ch->dcd) wake_up_interruptible(&ch->port.open_wait); @@ -1765,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) * that the driver will wait on carrier detect. */ if (ts->c_cflag & CLOCAL) - clear_bit(ASYNC_CHECK_CD, &ch->port.flags); + clear_bit(ASYNCB_CHECK_CD, &ch->port.flags); else - set_bit(ASYNC_CHECK_CD, &ch->port.flags); + set_bit(ASYNCB_CHECK_CD, &ch->port.flags); mval = ch->m_dtr | ch->m_rts; } /* End CBAUD not detected */ iflag = termios2digi_i(ch, ts->c_iflag); @@ -2114,8 +2114,8 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, tty_wait_until_sent(tty, 0); } else { /* ldisc lock already held in ioctl */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); } unlock_kernel(); /* Fall Thru */ @@ -2244,7 +2244,8 @@ static void do_softint(struct work_struct *work) if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { tty_hangup(tty); wake_up_interruptible(&ch->port.open_wait); - clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags); + clear_bit(ASYNCB_NORMAL_ACTIVE, + &ch->port.flags); } } tty_kref_put(tty); diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c index 0061e18aff6..0d10b89218e 100644 --- a/drivers/char/ip2/i2lib.c +++ b/drivers/char/ip2/i2lib.c @@ -868,11 +868,11 @@ i2Input(i2ChanStrPtr pCh) amountToMove = count; } // Move the first block - pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY, + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, &(pCh->Ibuf[stripIndex]), NULL, amountToMove ); // If we needed to wrap, do the second data move if (count > amountToMove) { - pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY, + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, pCh->Ibuf, NULL, count - amountToMove ); } // Bump and wrap the stripIndex all at once by the amount of data read. This diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index afd9247cf08..517271c762e 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -1315,8 +1315,8 @@ static inline void isig(int sig, struct tty_struct *tty, int flush) if (tty->pgrp) kill_pgrp(tty->pgrp, sig, 1); if (flush || !L_NOFLSH(tty)) { - if ( tty->ldisc.ops->flush_buffer ) - tty->ldisc.ops->flush_buffer(tty); + if ( tty->ldisc->ops->flush_buffer ) + tty->ldisc->ops->flush_buffer(tty); i2InputFlush( tty->driver_data ); } } diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index a59eac584d1..4d745a89504 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -329,7 +329,7 @@ static inline void drop_rts(struct isi_port *port) /* card->lock MUST NOT be held */ -static void isicom_raise_dtr_rts(struct tty_port *port) +static void isicom_dtr_rts(struct tty_port *port, int on) { struct isi_port *ip = container_of(port, struct isi_port, port); struct isi_board *card = ip->card; @@ -339,10 +339,17 @@ static void isicom_raise_dtr_rts(struct tty_port *port) if (!lock_card(card)) return; - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0f04, base); - InterruptTheCard(base); - ip->status |= (ISI_DTR | ISI_RTS); + if (on) { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0f04, base); + InterruptTheCard(base); + ip->status |= (ISI_DTR | ISI_RTS); + } else { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0C04, base); + InterruptTheCard(base); + ip->status &= ~(ISI_DTR | ISI_RTS); + } unlock_card(card); } @@ -1339,7 +1346,7 @@ static const struct tty_operations isicom_ops = { static const struct tty_port_operations isicom_port_ops = { .carrier_raised = isicom_carrier_raised, - .raise_dtr_rts = isicom_raise_dtr_rts, + .dtr_rts = isicom_dtr_rts, }; static int __devinit reset_card(struct pci_dev *pdev, diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index fff19f7e29d..e18800c400b 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -1140,14 +1140,14 @@ static int stli_carrier_raised(struct tty_port *port) return (portp->sigs & TIOCM_CD) ? 1 : 0; } -static void stli_raise_dtr_rts(struct tty_port *port) +static void stli_dtr_rts(struct tty_port *port, int on) { struct stliport *portp = container_of(port, struct stliport, port); struct stlibrd *brdp = stli_brds[portp->brdnr]; - stli_mkasysigs(&portp->asig, 1, 1); + stli_mkasysigs(&portp->asig, on, on); if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, sizeof(asysigs_t), 0) < 0) - printk(KERN_WARNING "istallion: dtr raise failed.\n"); + printk(KERN_WARNING "istallion: dtr set failed.\n"); } @@ -4417,7 +4417,7 @@ static const struct tty_operations stli_ops = { static const struct tty_port_operations stli_port_ops = { .carrier_raised = stli_carrier_raised, - .raise_dtr_rts = stli_raise_dtr_rts, + .dtr_rts = stli_dtr_rts, }; /*****************************************************************************/ diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 4a4cab73d0b..65b6ff2442c 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -1184,6 +1184,11 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } + if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + ch = &brd->ports[port % MAX_PORTS_PER_BOARD]; ch->port.count++; tty->driver_data = ch; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 13f8871e5b2..9533f43a30b 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -547,14 +547,18 @@ static int mxser_carrier_raised(struct tty_port *port) return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; } -static void mxser_raise_dtr_rts(struct tty_port *port) +static void mxser_dtr_rts(struct tty_port *port, int on) { struct mxser_port *mp = container_of(port, struct mxser_port, port); unsigned long flags; spin_lock_irqsave(&mp->slock, flags); - outb(inb(mp->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + if (on) + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + else + outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), + mp->ioaddr + UART_MCR); spin_unlock_irqrestore(&mp->slock, flags); } @@ -2356,7 +2360,7 @@ static const struct tty_operations mxser_ops = { struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, - .raise_dtr_rts = mxser_raise_dtr_rts, + .dtr_rts = mxser_dtr_rts, }; /* diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c index bacb3e2872a..461ece591a5 100644 --- a/drivers/char/n_hdlc.c +++ b/drivers/char/n_hdlc.c @@ -342,8 +342,8 @@ static int n_hdlc_tty_open (struct tty_struct *tty) #endif /* Flush any pending characters in the driver and discipline. */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); tty_driver_flush_buffer(tty); diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index f6f0e4ec2b5..94a5d5020ab 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -73,24 +73,6 @@ #define ECHO_OP_SET_CANON_COL 0x81 #define ECHO_OP_ERASE_TAB 0x82 -static inline unsigned char *alloc_buf(void) -{ - gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; - - if (PAGE_SIZE != N_TTY_BUF_SIZE) - return kmalloc(N_TTY_BUF_SIZE, prio); - else - return (unsigned char *)__get_free_page(prio); -} - -static inline void free_buf(unsigned char *buf) -{ - if (PAGE_SIZE != N_TTY_BUF_SIZE) - kfree(buf); - else - free_page((unsigned long) buf); -} - static inline int tty_put_user(struct tty_struct *tty, unsigned char x, unsigned char __user *ptr) { @@ -1558,11 +1540,11 @@ static void n_tty_close(struct tty_struct *tty) { n_tty_flush_buffer(tty); if (tty->read_buf) { - free_buf(tty->read_buf); + kfree(tty->read_buf); tty->read_buf = NULL; } if (tty->echo_buf) { - free_buf(tty->echo_buf); + kfree(tty->echo_buf); tty->echo_buf = NULL; } } @@ -1584,17 +1566,16 @@ static int n_tty_open(struct tty_struct *tty) /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { - tty->read_buf = alloc_buf(); + tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!tty->read_buf) return -ENOMEM; } if (!tty->echo_buf) { - tty->echo_buf = alloc_buf(); + tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); + if (!tty->echo_buf) return -ENOMEM; } - memset(tty->read_buf, 0, N_TTY_BUF_SIZE); - memset(tty->echo_buf, 0, N_TTY_BUF_SIZE); reset_buffer_flags(tty); tty->column = 0; n_tty_set_termios(tty, NULL); diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 19d79fc5446..77b36488922 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -383,7 +383,7 @@ static void async_mode(MGSLPC_INFO *info); static void tx_timeout(unsigned long context); static int carrier_raised(struct tty_port *port); -static void raise_dtr_rts(struct tty_port *port); +static void dtr_rts(struct tty_port *port, int onoff); #if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) @@ -513,7 +513,7 @@ static void ldisc_receive_buf(struct tty_struct *tty, static const struct tty_port_operations mgslpc_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts + .dtr_rts = dtr_rts }; static int mgslpc_probe(struct pcmcia_device *link) @@ -2528,13 +2528,16 @@ static int carrier_raised(struct tty_port *port) return 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int onoff) { MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); unsigned long flags; spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (onoff) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR; set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 31038a0052a..5acd29e6e04 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -30,7 +30,6 @@ #include <asm/system.h> -/* These are global because they are accessed in tty_io.c */ #ifdef CONFIG_UNIX98_PTYS static struct tty_driver *ptm_driver; static struct tty_driver *pts_driver; @@ -111,7 +110,7 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, c = to->receive_room; if (c > count) c = count; - to->ldisc.ops->receive_buf(to, buf, NULL, c); + to->ldisc->ops->receive_buf(to, buf, NULL, c); return c; } @@ -149,11 +148,11 @@ static int pty_chars_in_buffer(struct tty_struct *tty) int count; /* We should get the line discipline lock for "tty->link" */ - if (!to || !to->ldisc.ops->chars_in_buffer) + if (!to || !to->ldisc->ops->chars_in_buffer) return 0; /* The ldisc must report 0 if no characters available to be read */ - count = to->ldisc.ops->chars_in_buffer(to); + count = to->ldisc->ops->chars_in_buffer(to); if (tty->driver->subtype == PTY_TYPE_SLAVE) return count; @@ -187,8 +186,8 @@ static void pty_flush_buffer(struct tty_struct *tty) if (!to) return; - if (to->ldisc.ops->flush_buffer) - to->ldisc.ops->flush_buffer(to); + if (to->ldisc->ops->flush_buffer) + to->ldisc->ops->flush_buffer(to); if (to->packet) { spin_lock_irqsave(&tty->ctrl_lock, flags); diff --git a/drivers/char/raw.c b/drivers/char/raw.c index 20d90e6a6e5..db32f0e4c7d 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -71,7 +71,7 @@ static int raw_open(struct inode *inode, struct file *filp) err = bd_claim(bdev, raw_open); if (err) goto out1; - err = set_blocksize(bdev, bdev_hardsect_size(bdev)); + err = set_blocksize(bdev, bdev_logical_block_size(bdev)); if (err) goto out2; filp->f_flags |= O_DIRECT; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index f59fc5cea06..63d5b628477 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -872,11 +872,16 @@ static int carrier_raised(struct tty_port *port) return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { struct r_port *info = container_of(port, struct r_port, port); - sSetDTR(&info->channel); - sSetRTS(&info->channel); + if (on) { + sSetDTR(&info->channel); + sSetRTS(&info->channel); + } else { + sClrDTR(&info->channel); + sClrRTS(&info->channel); + } } /* @@ -934,7 +939,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* * Info->count is now 1; so it's safe to sleep now. */ - if (!test_bit(ASYNC_INITIALIZED, &port->flags)) { + if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { cp = &info->channel; sSetRxTrigger(cp, TRIG_1); if (sGetChanStatus(cp) & CD_ACT) @@ -958,7 +963,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) sEnRxFIFO(cp); sEnTransmit(cp); - set_bit(ASYNC_INITIALIZED, &info->port.flags); + set_bit(ASYNCB_INITIALIZED, &info->port.flags); /* * Set up the tty->alt_speed kludge @@ -1641,7 +1646,7 @@ static int rp_write(struct tty_struct *tty, /* Write remaining data into the port's xmit_buf */ while (1) { /* Hung up ? */ - if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags)) + if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags)) goto end; c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); c = min(c, XMIT_BUF_SIZE - info->xmit_head); @@ -2250,7 +2255,7 @@ static const struct tty_operations rocket_ops = { static const struct tty_port_operations rocket_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* diff --git a/drivers/char/selection.c b/drivers/char/selection.c index cb8ca569896..f97b9e84806 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -327,7 +327,7 @@ int paste_selection(struct tty_struct *tty) } count = sel_buffer_lth - pasted; count = min(count, tty->receive_room); - tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted, + tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, NULL, count); pasted += count; } diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 2ad813a801d..53e504f41b2 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -772,11 +772,11 @@ static int stl_carrier_raised(struct tty_port *port) return (portp->sigs & TIOCM_CD) ? 1 : 0; } -static void stl_raise_dtr_rts(struct tty_port *port) +static void stl_dtr_rts(struct tty_port *port, int on) { struct stlport *portp = container_of(port, struct stlport, port); /* Takes brd_lock internally */ - stl_setsignals(portp, 1, 1); + stl_setsignals(portp, on, on); } /*****************************************************************************/ @@ -2547,7 +2547,7 @@ static const struct tty_operations stl_ops = { static const struct tty_port_operations stl_port_ops = { .carrier_raised = stl_carrier_raised, - .raise_dtr_rts = stl_raise_dtr_rts, + .dtr_rts = stl_dtr_rts, }; /*****************************************************************************/ diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index afd0b26ca05..afded3a2379 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -3247,13 +3247,16 @@ static int carrier_raised(struct tty_port *port) return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); unsigned long flags; spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); usc_set_serial_signals(info); spin_unlock_irqrestore(&info->irq_spinlock,flags); } @@ -4258,7 +4261,7 @@ static void mgsl_add_device( struct mgsl_struct *info ) static const struct tty_port_operations mgsl_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 5e256494686..1386625fc4c 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -214,6 +214,7 @@ struct slgt_desc #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) +#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) #define desc_count(a) (le16_to_cpu((a).count)) #define desc_status(a) (le16_to_cpu((a).status)) #define desc_complete(a) (le16_to_cpu((a).status) & BIT15) @@ -297,6 +298,7 @@ struct slgt_info { u32 max_frame_size; /* as set by device config */ unsigned int rbuf_fill_level; + unsigned int rx_pio; unsigned int if_mode; unsigned int base_clock; @@ -331,6 +333,8 @@ struct slgt_info { struct slgt_desc *rbufs; unsigned int rbuf_current; unsigned int rbuf_index; + unsigned int rbuf_fill_index; + unsigned short rbuf_fill_count; unsigned int tbuf_count; struct slgt_desc *tbufs; @@ -2110,6 +2114,40 @@ static void ri_change(struct slgt_info *info, unsigned short status) info->pending_bh |= BH_STATUS; } +static void isr_rxdata(struct slgt_info *info) +{ + unsigned int count = info->rbuf_fill_count; + unsigned int i = info->rbuf_fill_index; + unsigned short reg; + + while (rd_reg16(info, SSR) & IRQ_RXDATA) { + reg = rd_reg16(info, RDR); + DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); + if (desc_complete(info->rbufs[i])) { + /* all buffers full */ + rx_stop(info); + info->rx_restart = 1; + continue; + } + info->rbufs[i].buf[count++] = (unsigned char)reg; + /* async mode saves status byte to buffer for each data byte */ + if (info->params.mode == MGSL_MODE_ASYNC) + info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); + if (count == info->rbuf_fill_level || (reg & BIT10)) { + /* buffer full or end of frame */ + set_desc_count(info->rbufs[i], count); + set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); + info->rbuf_fill_count = count = 0; + if (++i == info->rbuf_count) + i = 0; + info->pending_bh |= BH_RECEIVE; + } + } + + info->rbuf_fill_index = i; + info->rbuf_fill_count = count; +} + static void isr_serial(struct slgt_info *info) { unsigned short status = rd_reg16(info, SSR); @@ -2125,6 +2163,8 @@ static void isr_serial(struct slgt_info *info) if (info->tx_count) isr_txeom(info, status); } + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { info->icount.brk++; /* process break detection if tty control allows */ @@ -2141,7 +2181,8 @@ static void isr_serial(struct slgt_info *info) } else { if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) isr_txeom(info, status); - + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); if (status & IRQ_RXIDLE) { if (status & RXIDLE) info->icount.rxidle++; @@ -2642,6 +2683,10 @@ static int rx_enable(struct slgt_info *info, int enable) return -EINVAL; } info->rbuf_fill_level = rbuf_fill_level; + if (rbuf_fill_level < 128) + info->rx_pio = 1; /* PIO mode */ + else + info->rx_pio = 0; /* DMA mode */ rx_stop(info); /* restart receiver to use new fill level */ } @@ -3099,13 +3144,16 @@ static int carrier_raised(struct tty_port *port) return (info->signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { unsigned long flags; struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3419,7 +3467,7 @@ static void add_device(struct slgt_info *info) static const struct tty_port_operations slgt_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* @@ -3841,15 +3889,27 @@ static void rx_start(struct slgt_info *info) rdma_reset(info); reset_rbufs(info); - /* set 1st descriptor address */ - wr_reg32(info, RDDAR, info->rbufs[0].pdesc); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* enable rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT2 + BIT0)); + if (info->rx_pio) { + /* rx request when rx FIFO not empty */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); + slgt_irq_on(info, IRQ_RXDATA); + if (info->params.mode == MGSL_MODE_ASYNC) { + /* enable saving of rx status */ + wr_reg32(info, RDCSR, BIT6); + } } else { - /* enable saving of rx status, rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + /* rx request when rx FIFO half full */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); + /* set 1st descriptor address */ + wr_reg32(info, RDDAR, info->rbufs[0].pdesc); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* enable rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT2 + BIT0)); + } else { + /* enable saving of rx status, rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + } } slgt_irq_on(info, IRQ_RXOVER); @@ -4467,6 +4527,8 @@ static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last static void reset_rbufs(struct slgt_info *info) { free_rbufs(info, 0, info->rbuf_count - 1); + info->rbuf_fill_index = 0; + info->rbuf_fill_count = 0; } /* diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 26de60efe4b..6f727e3c53a 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -3277,13 +3277,16 @@ static int carrier_raised(struct tty_port *port) return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { SLMP_INFO *info = container_of(port, SLMP_INFO, port); unsigned long flags; spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3746,7 +3749,7 @@ static void add_device(SLMP_INFO *info) static const struct tty_port_operations port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* Allocate and initialize a device instance structure diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c index 55ba6f14288..ac16fbec72d 100644 --- a/drivers/char/tty_audit.c +++ b/drivers/char/tty_audit.c @@ -29,10 +29,7 @@ static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor, buf = kmalloc(sizeof(*buf), GFP_KERNEL); if (!buf) goto err; - if (PAGE_SIZE != N_TTY_BUF_SIZE) - buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL); - else - buf->data = (unsigned char *)__get_free_page(GFP_KERNEL); + buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!buf->data) goto err_buf; atomic_set(&buf->count, 1); @@ -52,10 +49,7 @@ err: static void tty_audit_buf_free(struct tty_audit_buf *buf) { WARN_ON(buf->valid != 0); - if (PAGE_SIZE != N_TTY_BUF_SIZE) - kfree(buf->data); - else - free_page((unsigned long)buf->data); + kfree(buf->data); kfree(buf); } diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 66b99a2049e..939e198d767 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -295,7 +295,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) struct tty_driver *p, *res = NULL; int tty_line = 0; int len; - char *str; + char *str, *stp; for (str = name; *str; str++) if ((*str >= '0' && *str <= '9') || *str == ',') @@ -311,13 +311,14 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) list_for_each_entry(p, &tty_drivers, tty_drivers) { if (strncmp(name, p->name, len) != 0) continue; - if (*str == ',') - str++; - if (*str == '\0') - str = NULL; + stp = str; + if (*stp == ',') + stp++; + if (*stp == '\0') + stp = NULL; if (tty_line >= 0 && tty_line <= p->num && p->ops && - p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) { + p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) { res = tty_driver_kref_get(p); *line = tty_line; break; @@ -470,43 +471,6 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); /** - * tty_ldisc_flush - flush line discipline queue - * @tty: tty - * - * Flush the line discipline queue (if any) for this tty. If there - * is no line discipline active this is a no-op. - */ - -void tty_ldisc_flush(struct tty_struct *tty) -{ - struct tty_ldisc *ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_ldisc_deref(ld); - } - tty_buffer_flush(tty); -} - -EXPORT_SYMBOL_GPL(tty_ldisc_flush); - -/** - * tty_reset_termios - reset terminal state - * @tty: tty to reset - * - * Restore a terminal to the driver default state - */ - -static void tty_reset_termios(struct tty_struct *tty) -{ - mutex_lock(&tty->termios_mutex); - *tty->termios = tty->driver->init_termios; - tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); - tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); - mutex_unlock(&tty->termios_mutex); -} - -/** * do_tty_hangup - actual handler for hangup events * @work: tty device * @@ -535,7 +499,6 @@ static void do_tty_hangup(struct work_struct *work) struct file *cons_filp = NULL; struct file *filp, *f = NULL; struct task_struct *p; - struct tty_ldisc *ld; int closecount = 0, n; unsigned long flags; int refs = 0; @@ -566,40 +529,8 @@ static void do_tty_hangup(struct work_struct *work) filp->f_op = &hung_up_tty_fops; } file_list_unlock(); - /* - * FIXME! What are the locking issues here? This may me overdoing - * things... This question is especially important now that we've - * removed the irqlock. - */ - ld = tty_ldisc_ref(tty); - if (ld != NULL) { - /* We may have no line discipline at this point */ - if (ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_driver_flush_buffer(tty); - if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) && - ld->ops->write_wakeup) - ld->ops->write_wakeup(tty); - if (ld->ops->hangup) - ld->ops->hangup(tty); - } - /* - * FIXME: Once we trust the LDISC code better we can wait here for - * ldisc completion and fix the driver call race - */ - wake_up_interruptible_poll(&tty->write_wait, POLLOUT); - wake_up_interruptible_poll(&tty->read_wait, POLLIN); - /* - * Shutdown the current line discipline, and reset it to - * N_TTY. - */ - if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) - tty_reset_termios(tty); - /* Defer ldisc switch */ - /* tty_deferred_ldisc_switch(N_TTY); - This should get done automatically when the port closes and - tty_release is called */ + tty_ldisc_hangup(tty); read_lock(&tasklist_lock); if (tty->session) { @@ -628,12 +559,15 @@ static void do_tty_hangup(struct work_struct *work) read_unlock(&tasklist_lock); spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->flags = 0; + clear_bit(TTY_THROTTLED, &tty->flags); + clear_bit(TTY_PUSH, &tty->flags); + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); put_pid(tty->session); put_pid(tty->pgrp); tty->session = NULL; tty->pgrp = NULL; tty->ctrl_status = 0; + set_bit(TTY_HUPPED, &tty->flags); spin_unlock_irqrestore(&tty->ctrl_lock, flags); /* Account for the p->signal references we killed */ @@ -659,10 +593,7 @@ static void do_tty_hangup(struct work_struct *work) * can't yet guarantee all that. */ set_bit(TTY_HUPPED, &tty->flags); - if (ld) { - tty_ldisc_enable(tty); - tty_ldisc_deref(ld); - } + tty_ldisc_enable(tty); unlock_kernel(); if (f) fput(f); @@ -2480,6 +2411,24 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int return tty->ops->tiocmset(tty, file, set, clear); } +struct tty_struct *tty_pair_get_tty(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + tty = tty->link; + return tty; +} +EXPORT_SYMBOL(tty_pair_get_tty); + +struct tty_struct *tty_pair_get_pty(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + return tty; + return tty->link; +} +EXPORT_SYMBOL(tty_pair_get_pty); + /* * Split this up, as gcc can choke on it otherwise.. */ @@ -2495,11 +2444,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (tty_paranoia_check(tty, inode, "tty_ioctl")) return -EINVAL; - real_tty = tty; - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && - tty->driver->subtype == PTY_TYPE_MASTER) - real_tty = tty->link; - + real_tty = tty_pair_get_tty(tty); /* * Factor out some common prep work @@ -2555,7 +2500,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGSID: return tiocgsid(tty, real_tty, p); case TIOCGETD: - return put_user(tty->ldisc.ops->num, (int __user *)p); + return put_user(tty->ldisc->ops->num, (int __user *)p); case TIOCSETD: return tiocsetd(tty, p); /* @@ -2770,6 +2715,7 @@ void initialize_tty_struct(struct tty_struct *tty, tty->buf.head = tty->buf.tail = NULL; tty_buffer_init(tty); mutex_init(&tty->termios_mutex); + mutex_init(&tty->ldisc_mutex); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); INIT_WORK(&tty->hangup_work, do_tty_hangup); diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 6f4c7d0a53b..8116bb1c8f8 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -97,14 +97,19 @@ EXPORT_SYMBOL(tty_driver_flush_buffer); * @tty: terminal * * Indicate that a tty should stop transmitting data down the stack. + * Takes the termios mutex to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. */ void tty_throttle(struct tty_struct *tty) { + mutex_lock(&tty->termios_mutex); /* check TTY_THROTTLED first so it indicates our state */ if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) && tty->ops->throttle) tty->ops->throttle(tty); + mutex_unlock(&tty->termios_mutex); } EXPORT_SYMBOL(tty_throttle); @@ -113,13 +118,21 @@ EXPORT_SYMBOL(tty_throttle); * @tty: terminal * * Indicate that a tty may continue transmitting data down the stack. + * Takes the termios mutex to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. + * + * Drivers should however remember that the stack can issue a throttle, + * then change flow control method, then unthrottle. */ void tty_unthrottle(struct tty_struct *tty) { + mutex_lock(&tty->termios_mutex); if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) && tty->ops->unthrottle) tty->ops->unthrottle(tty); + mutex_unlock(&tty->termios_mutex); } EXPORT_SYMBOL(tty_unthrottle); @@ -613,9 +626,25 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) return 0; } +static void copy_termios(struct tty_struct *tty, struct ktermios *kterm) +{ + mutex_lock(&tty->termios_mutex); + memcpy(kterm, tty->termios, sizeof(struct ktermios)); + mutex_unlock(&tty->termios_mutex); +} + +static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm) +{ + mutex_lock(&tty->termios_mutex); + memcpy(kterm, tty->termios_locked, sizeof(struct ktermios)); + mutex_unlock(&tty->termios_mutex); +} + static int get_termio(struct tty_struct *tty, struct termio __user *termio) { - if (kernel_termios_to_user_termio(termio, tty->termios)) + struct ktermios kterm; + copy_termios(tty, &kterm); + if (kernel_termios_to_user_termio(termio, &kterm)) return -EFAULT; return 0; } @@ -917,6 +946,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, struct tty_struct *real_tty; void __user *p = (void __user *)arg; int ret = 0; + struct ktermios kterm; + struct termiox ktermx; if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) @@ -952,23 +983,20 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termios(real_tty, p, TERMIOS_OLD); #ifndef TCGETS2 case TCGETS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; #else case TCGETS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TCGETS2: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios2 __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TCSETSF2: return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT); @@ -987,34 +1015,36 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termios(real_tty, p, TERMIOS_TERMIO); #ifndef TCGETS2 case TIOCGLCKTRMIOS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSLCKTRMIOS: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - mutex_lock(&real_tty->termios_mutex); - if (user_termios_to_kernel_termios(real_tty->termios_locked, + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios(&kterm, (struct termios __user *) arg)) - ret = -EFAULT; + return -EFAULT; + mutex_lock(&real_tty->termios_mutex); + memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); mutex_unlock(&real_tty->termios_mutex); - return ret; + return 0; #else case TIOCGLCKTRMIOS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSLCKTRMIOS: if (!capable(CAP_SYS_ADMIN)) - ret = -EPERM; - mutex_lock(&real_tty->termios_mutex); - if (user_termios_to_kernel_termios_1(real_tty->termios_locked, + return -EPERM; + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios_1(&kterm, (struct termios __user *) arg)) - ret = -EFAULT; + return -EFAULT; + mutex_lock(&real_tty->termios_mutex); + memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); mutex_unlock(&real_tty->termios_mutex); return ret; #endif @@ -1023,9 +1053,10 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, if (real_tty->termiox == NULL) return -EINVAL; mutex_lock(&real_tty->termios_mutex); - if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox))) - ret = -EFAULT; + memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox)); mutex_unlock(&real_tty->termios_mutex); + if (copy_to_user(p, &ktermx, sizeof(struct termiox))) + ret = -EFAULT; return ret; case TCSETX: return set_termiox(real_tty, p, 0); @@ -1035,10 +1066,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termiox(real_tty, p, TERMIOS_FLUSH); #endif case TIOCGSOFTCAR: - mutex_lock(&real_tty->termios_mutex); - ret = put_user(C_CLOCAL(real_tty) ? 1 : 0, + copy_termios(real_tty, &kterm); + ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0, (int __user *)arg); - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSSOFTCAR: if (get_user(arg, (unsigned int __user *) arg)) diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index f78f5b0127a..39c8f86dedd 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -115,19 +115,22 @@ EXPORT_SYMBOL(tty_unregister_ldisc); /** * tty_ldisc_try_get - try and reference an ldisc * @disc: ldisc number - * @ld: tty ldisc structure to complete * * Attempt to open and lock a line discipline into place. Return - * the line discipline refcounted and assigned in ld. On an error - * report the error code back + * the line discipline refcounted or an error. */ -static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) +static struct tty_ldisc *tty_ldisc_try_get(int disc) { unsigned long flags; + struct tty_ldisc *ld; struct tty_ldisc_ops *ldops; int err = -EINVAL; - + + ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL); + if (ld == NULL) + return ERR_PTR(-ENOMEM); + spin_lock_irqsave(&tty_ldisc_lock, flags); ld->ops = NULL; ldops = tty_ldiscs[disc]; @@ -140,17 +143,19 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) /* lock it */ ldops->refcount++; ld->ops = ldops; + ld->refcount = 0; err = 0; } } spin_unlock_irqrestore(&tty_ldisc_lock, flags); - return err; + if (err) + return ERR_PTR(err); + return ld; } /** * tty_ldisc_get - take a reference to an ldisc * @disc: ldisc number - * @ld: tty line discipline structure to use * * Takes a reference to a line discipline. Deals with refcounts and * module locking counts. Returns NULL if the discipline is not available. @@ -161,52 +166,54 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) * takes tty_ldisc_lock to guard against ldisc races */ -static int tty_ldisc_get(int disc, struct tty_ldisc *ld) +static struct tty_ldisc *tty_ldisc_get(int disc) { - int err; + struct tty_ldisc *ld; if (disc < N_TTY || disc >= NR_LDISCS) - return -EINVAL; - err = tty_ldisc_try_get(disc, ld); - if (err < 0) { + return ERR_PTR(-EINVAL); + ld = tty_ldisc_try_get(disc); + if (IS_ERR(ld)) { request_module("tty-ldisc-%d", disc); - err = tty_ldisc_try_get(disc, ld); + ld = tty_ldisc_try_get(disc); } - return err; + return ld; } /** * tty_ldisc_put - drop ldisc reference - * @disc: ldisc number + * @ld: ldisc * * Drop a reference to a line discipline. Manage refcounts and - * module usage counts + * module usage counts. Free the ldisc once the recount hits zero. * * Locking: * takes tty_ldisc_lock to guard against ldisc races */ -static void tty_ldisc_put(struct tty_ldisc_ops *ld) +static void tty_ldisc_put(struct tty_ldisc *ld) { unsigned long flags; - int disc = ld->num; + int disc = ld->ops->num; + struct tty_ldisc_ops *ldo; BUG_ON(disc < N_TTY || disc >= NR_LDISCS); spin_lock_irqsave(&tty_ldisc_lock, flags); - ld = tty_ldiscs[disc]; - BUG_ON(ld->refcount == 0); - ld->refcount--; - module_put(ld->owner); + ldo = tty_ldiscs[disc]; + BUG_ON(ldo->refcount == 0); + ldo->refcount--; + module_put(ldo->owner); spin_unlock_irqrestore(&tty_ldisc_lock, flags); + kfree(ld); } -static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) +static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) { return (*pos < NR_LDISCS) ? pos : NULL; } -static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos) +static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos) { (*pos)++; return (*pos < NR_LDISCS) ? pos : NULL; @@ -219,12 +226,13 @@ static void tty_ldiscs_seq_stop(struct seq_file *m, void *v) static int tty_ldiscs_seq_show(struct seq_file *m, void *v) { int i = *(loff_t *)v; - struct tty_ldisc ld; - - if (tty_ldisc_get(i, &ld) < 0) + struct tty_ldisc *ld; + + ld = tty_ldisc_try_get(i); + if (IS_ERR(ld)) return 0; - seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i); - tty_ldisc_put(ld.ops); + seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i); + tty_ldisc_put(ld); return 0; } @@ -263,8 +271,7 @@ const struct file_operations tty_ldiscs_proc_fops = { static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld) { - ld->refcount = 0; - tty->ldisc = *ld; + tty->ldisc = ld; } /** @@ -286,7 +293,7 @@ static int tty_ldisc_try(struct tty_struct *tty) int ret = 0; spin_lock_irqsave(&tty_ldisc_lock, flags); - ld = &tty->ldisc; + ld = tty->ldisc; if (test_bit(TTY_LDISC, &tty->flags)) { ld->refcount++; ret = 1; @@ -315,10 +322,9 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { /* wait_event is a macro */ wait_event(tty_ldisc_wait, tty_ldisc_try(tty)); - WARN_ON(tty->ldisc.refcount == 0); - return &tty->ldisc; + WARN_ON(tty->ldisc->refcount == 0); + return tty->ldisc; } - EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); /** @@ -335,10 +341,9 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) { if (tty_ldisc_try(tty)) - return &tty->ldisc; + return tty->ldisc; return NULL; } - EXPORT_SYMBOL_GPL(tty_ldisc_ref); /** @@ -366,7 +371,6 @@ void tty_ldisc_deref(struct tty_ldisc *ld) wake_up(&tty_ldisc_wait); spin_unlock_irqrestore(&tty_ldisc_lock, flags); } - EXPORT_SYMBOL_GPL(tty_ldisc_deref); /** @@ -389,6 +393,26 @@ void tty_ldisc_enable(struct tty_struct *tty) } /** + * tty_ldisc_flush - flush line discipline queue + * @tty: tty + * + * Flush the line discipline queue (if any) for this tty. If there + * is no line discipline active this is a no-op. + */ + +void tty_ldisc_flush(struct tty_struct *tty) +{ + struct tty_ldisc *ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_ldisc_deref(ld); + } + tty_buffer_flush(tty); +} +EXPORT_SYMBOL_GPL(tty_ldisc_flush); + +/** * tty_set_termios_ldisc - set ldisc field * @tty: tty structure * @num: line discipline number @@ -407,6 +431,39 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) mutex_unlock(&tty->termios_mutex); } +/** + * tty_ldisc_open - open a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to open + * + * A helper opening method. Also a convenient debugging and check + * point. + */ + +static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) +{ + WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); + if (ld->ops->open) + return ld->ops->open(tty); + return 0; +} + +/** + * tty_ldisc_close - close a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to close + * + * A helper close method. Also a convenient debugging and check + * point. + */ + +static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) +{ + WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags)); + clear_bit(TTY_LDISC_OPEN, &tty->flags); + if (ld->ops->close) + ld->ops->close(tty); +} /** * tty_ldisc_restore - helper for tty ldisc change @@ -420,66 +477,136 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) { char buf[64]; - struct tty_ldisc new_ldisc; + struct tty_ldisc *new_ldisc; + int r; /* There is an outstanding reference here so this is safe */ - tty_ldisc_get(old->ops->num, old); + old = tty_ldisc_get(old->ops->num); + WARN_ON(IS_ERR(old)); tty_ldisc_assign(tty, old); tty_set_termios_ldisc(tty, old->ops->num); - if (old->ops->open && (old->ops->open(tty) < 0)) { - tty_ldisc_put(old->ops); + if (tty_ldisc_open(tty, old) < 0) { + tty_ldisc_put(old); /* This driver is always present */ - if (tty_ldisc_get(N_TTY, &new_ldisc) < 0) + new_ldisc = tty_ldisc_get(N_TTY); + if (IS_ERR(new_ldisc)) panic("n_tty: get"); - tty_ldisc_assign(tty, &new_ldisc); + tty_ldisc_assign(tty, new_ldisc); tty_set_termios_ldisc(tty, N_TTY); - if (new_ldisc.ops->open) { - int r = new_ldisc.ops->open(tty); - if (r < 0) - panic("Couldn't open N_TTY ldisc for " - "%s --- error %d.", - tty_name(tty, buf), r); - } + r = tty_ldisc_open(tty, new_ldisc); + if (r < 0) + panic("Couldn't open N_TTY ldisc for " + "%s --- error %d.", + tty_name(tty, buf), r); } } /** + * tty_ldisc_halt - shut down the line discipline + * @tty: tty device + * + * Shut down the line discipline and work queue for this tty device. + * The TTY_LDISC flag being cleared ensures no further references can + * be obtained while the delayed work queue halt ensures that no more + * data is fed to the ldisc. + * + * In order to wait for any existing references to complete see + * tty_ldisc_wait_idle. + */ + +static int tty_ldisc_halt(struct tty_struct *tty) +{ + clear_bit(TTY_LDISC, &tty->flags); + return cancel_delayed_work(&tty->buf.work); +} + +/** + * tty_ldisc_wait_idle - wait for the ldisc to become idle + * @tty: tty to wait for + * + * Wait for the line discipline to become idle. The discipline must + * have been halted for this to guarantee it remains idle. + * + * tty_ldisc_lock protects the ref counts currently. + */ + +static int tty_ldisc_wait_idle(struct tty_struct *tty) +{ + unsigned long flags; + spin_lock_irqsave(&tty_ldisc_lock, flags); + while (tty->ldisc->refcount) { + spin_unlock_irqrestore(&tty_ldisc_lock, flags); + if (wait_event_timeout(tty_ldisc_wait, + tty->ldisc->refcount == 0, 5 * HZ) == 0) + return -EBUSY; + spin_lock_irqsave(&tty_ldisc_lock, flags); + } + spin_unlock_irqrestore(&tty_ldisc_lock, flags); + return 0; +} + +/** * tty_set_ldisc - set line discipline * @tty: the terminal to set * @ldisc: the line discipline * * Set the discipline of a tty line. Must be called from a process - * context. + * context. The ldisc change logic has to protect itself against any + * overlapping ldisc change (including on the other end of pty pairs), + * the close of one side of a tty/pty pair, and eventually hangup. * - * Locking: takes tty_ldisc_lock. - * called functions take termios_mutex + * Locking: takes tty_ldisc_lock, termios_mutex */ int tty_set_ldisc(struct tty_struct *tty, int ldisc) { int retval; - struct tty_ldisc o_ldisc, new_ldisc; - int work; - unsigned long flags; + struct tty_ldisc *o_ldisc, *new_ldisc; + int work, o_work = 0; struct tty_struct *o_tty; -restart: - /* This is a bit ugly for now but means we can break the 'ldisc - is part of the tty struct' assumption later */ - retval = tty_ldisc_get(ldisc, &new_ldisc); - if (retval) - return retval; + new_ldisc = tty_ldisc_get(ldisc); + if (IS_ERR(new_ldisc)) + return PTR_ERR(new_ldisc); + + /* + * We need to look at the tty locking here for pty/tty pairs + * when both sides try to change in parallel. + */ + + o_tty = tty->link; /* o_tty is the pty side or NULL */ + + + /* + * Check the no-op case + */ + + if (tty->ldisc->ops->num == ldisc) { + tty_ldisc_put(new_ldisc); + return 0; + } /* * Problem: What do we do if this blocks ? + * We could deadlock here */ tty_wait_until_sent(tty, 0); - if (tty->ldisc.ops->num == ldisc) { - tty_ldisc_put(new_ldisc.ops); - return 0; + mutex_lock(&tty->ldisc_mutex); + + /* + * We could be midstream of another ldisc change which has + * dropped the lock during processing. If so we need to wait. + */ + + while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { + mutex_unlock(&tty->ldisc_mutex); + wait_event(tty_ldisc_wait, + test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); + mutex_lock(&tty->ldisc_mutex); } + set_bit(TTY_LDISC_CHANGING, &tty->flags); /* * No more input please, we are switching. The new ldisc @@ -489,8 +616,6 @@ restart: tty->receive_room = 0; o_ldisc = tty->ldisc; - o_tty = tty->link; - /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -501,108 +626,181 @@ restart: * with a userspace app continually trying to use the tty in * parallel to the change and re-referencing the tty. */ - clear_bit(TTY_LDISC, &tty->flags); - if (o_tty) - clear_bit(TTY_LDISC, &o_tty->flags); - spin_lock_irqsave(&tty_ldisc_lock, flags); - if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) { - if (tty->ldisc.refcount) { - /* Free the new ldisc we grabbed. Must drop the lock - first. */ - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(o_ldisc.ops); - /* - * There are several reasons we may be busy, including - * random momentary I/O traffic. We must therefore - * retry. We could distinguish between blocking ops - * and retries if we made tty_ldisc_wait() smarter. - * That is up for discussion. - */ - if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0) - return -ERESTARTSYS; - goto restart; - } - if (o_tty && o_tty->ldisc.refcount) { - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(o_tty->ldisc.ops); - if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0) - return -ERESTARTSYS; - goto restart; - } - } - /* - * If the TTY_LDISC bit is set, then we are racing against - * another ldisc change - */ - if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { - struct tty_ldisc *ld; - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(new_ldisc.ops); - ld = tty_ldisc_ref_wait(tty); - tty_ldisc_deref(ld); - goto restart; - } - /* - * This flag is used to avoid two parallel ldisc changes. Once - * open and close are fine grained locked this may work better - * as a mutex shared with the open/close/hup paths - */ - set_bit(TTY_LDISC_CHANGING, &tty->flags); + work = tty_ldisc_halt(tty); if (o_tty) - set_bit(TTY_LDISC_CHANGING, &o_tty->flags); - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - - /* - * From this point on we know nobody has an ldisc - * usage reference, nor can they obtain one until - * we say so later on. - */ + o_work = tty_ldisc_halt(o_tty); - work = cancel_delayed_work(&tty->buf.work); /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - * MUST NOT hold locks here. + * Wait for ->hangup_work and ->buf.work handlers to terminate. + * We must drop the mutex here in case a hangup is also in process. */ + + mutex_unlock(&tty->ldisc_mutex); + flush_scheduled_work(); + + /* Let any existing reference holders finish */ + retval = tty_ldisc_wait_idle(tty); + if (retval < 0) { + clear_bit(TTY_LDISC_CHANGING, &tty->flags); + tty_ldisc_put(new_ldisc); + return retval; + } + + mutex_lock(&tty->ldisc_mutex); + if (test_bit(TTY_HUPPED, &tty->flags)) { + /* We were raced by the hangup method. It will have stomped + the ldisc data and closed the ldisc down */ + clear_bit(TTY_LDISC_CHANGING, &tty->flags); + mutex_unlock(&tty->ldisc_mutex); + tty_ldisc_put(new_ldisc); + return -EIO; + } + /* Shutdown the current discipline. */ - if (o_ldisc.ops->close) - (o_ldisc.ops->close)(tty); + tty_ldisc_close(tty, o_ldisc); /* Now set up the new line discipline. */ - tty_ldisc_assign(tty, &new_ldisc); + tty_ldisc_assign(tty, new_ldisc); tty_set_termios_ldisc(tty, ldisc); - if (new_ldisc.ops->open) - retval = (new_ldisc.ops->open)(tty); + + retval = tty_ldisc_open(tty, new_ldisc); if (retval < 0) { - tty_ldisc_put(new_ldisc.ops); - tty_ldisc_restore(tty, &o_ldisc); + /* Back to the old one or N_TTY if we can't */ + tty_ldisc_put(new_ldisc); + tty_ldisc_restore(tty, o_ldisc); } + /* At this point we hold a reference to the new ldisc and a a reference to the old ldisc. If we ended up flipping back to the existing ldisc we have two references to it */ - if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc) + if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc) tty->ops->set_ldisc(tty); - tty_ldisc_put(o_ldisc.ops); + tty_ldisc_put(o_ldisc); /* - * Allow ldisc referencing to occur as soon as the driver - * ldisc callback completes. + * Allow ldisc referencing to occur again */ tty_ldisc_enable(tty); if (o_tty) tty_ldisc_enable(o_tty); - /* Restart it in case no characters kick it off. Safe if + /* Restart the work queue in case no characters kick it off. Safe if already running */ if (work) schedule_delayed_work(&tty->buf.work, 1); + if (o_work) + schedule_delayed_work(&o_tty->buf.work, 1); + mutex_unlock(&tty->ldisc_mutex); return retval; } +/** + * tty_reset_termios - reset terminal state + * @tty: tty to reset + * + * Restore a terminal to the driver default state. + */ + +static void tty_reset_termios(struct tty_struct *tty) +{ + mutex_lock(&tty->termios_mutex); + *tty->termios = tty->driver->init_termios; + tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); + tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); + mutex_unlock(&tty->termios_mutex); +} + + +/** + * tty_ldisc_reinit - reinitialise the tty ldisc + * @tty: tty to reinit + * + * Switch the tty back to N_TTY line discipline and leave the + * ldisc state closed + */ + +static void tty_ldisc_reinit(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + tty->ldisc = NULL; + /* + * Switch the line discipline back + */ + ld = tty_ldisc_get(N_TTY); + BUG_ON(IS_ERR(ld)); + tty_ldisc_assign(tty, ld); + tty_set_termios_ldisc(tty, N_TTY); +} + +/** + * tty_ldisc_hangup - hangup ldisc reset + * @tty: tty being hung up + * + * Some tty devices reset their termios when they receive a hangup + * event. In that situation we must also switch back to N_TTY properly + * before we reset the termios data. + * + * Locking: We can take the ldisc mutex as the rest of the code is + * careful to allow for this. + * + * In the pty pair case this occurs in the close() path of the + * tty itself so we must be careful about locking rules. + */ + +void tty_ldisc_hangup(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + /* + * FIXME! What are the locking issues here? This may me overdoing + * things... This question is especially important now that we've + * removed the irqlock. + */ + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + /* We may have no line discipline at this point */ + if (ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_driver_flush_buffer(tty); + if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) && + ld->ops->write_wakeup) + ld->ops->write_wakeup(tty); + if (ld->ops->hangup) + ld->ops->hangup(tty); + tty_ldisc_deref(ld); + } + /* + * FIXME: Once we trust the LDISC code better we can wait here for + * ldisc completion and fix the driver call race + */ + wake_up_interruptible_poll(&tty->write_wait, POLLOUT); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); + /* + * Shutdown the current line discipline, and reset it to + * N_TTY. + */ + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) { + /* Avoid racing set_ldisc */ + mutex_lock(&tty->ldisc_mutex); + /* Switch back to N_TTY */ + tty_ldisc_reinit(tty); + /* At this point we have a closed ldisc and we want to + reopen it. We could defer this to the next open but + it means auditing a lot of other paths so this is a FIXME */ + WARN_ON(tty_ldisc_open(tty, tty->ldisc)); + tty_ldisc_enable(tty); + mutex_unlock(&tty->ldisc_mutex); + tty_reset_termios(tty); + } +} /** * tty_ldisc_setup - open line discipline @@ -610,24 +808,23 @@ restart: * @o_tty: pair tty for pty/tty pairs * * Called during the initial open of a tty/pty pair in order to set up the - * line discplines and bind them to the tty. + * line disciplines and bind them to the tty. This has no locking issues + * as the device isn't yet active. */ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) { - struct tty_ldisc *ld = &tty->ldisc; + struct tty_ldisc *ld = tty->ldisc; int retval; - if (ld->ops->open) { - retval = (ld->ops->open)(tty); - if (retval) - return retval; - } - if (o_tty && o_tty->ldisc.ops->open) { - retval = (o_tty->ldisc.ops->open)(o_tty); + retval = tty_ldisc_open(tty, ld); + if (retval) + return retval; + + if (o_tty) { + retval = tty_ldisc_open(o_tty, o_tty->ldisc); if (retval) { - if (ld->ops->close) - (ld->ops->close)(tty); + tty_ldisc_close(tty, ld); return retval; } tty_ldisc_enable(o_tty); @@ -635,32 +832,25 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_enable(tty); return 0; } - /** * tty_ldisc_release - release line discipline * @tty: tty being shut down * @o_tty: pair tty for pty/tty pairs * - * Called during the final close of a tty/pty pair in order to shut down the - * line discpline layer. + * Called during the final close of a tty/pty pair in order to shut down + * the line discpline layer. On exit the ldisc assigned is N_TTY and the + * ldisc has not been opened. */ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) { - unsigned long flags; - struct tty_ldisc ld; /* * Prevent flush_to_ldisc() from rescheduling the work for later. Then * kill any delayed work. As this is the final close it does not * race with the set_ldisc code path. */ - clear_bit(TTY_LDISC, &tty->flags); - cancel_delayed_work(&tty->buf.work); - - /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - */ + tty_ldisc_halt(tty); flush_scheduled_work(); /* @@ -668,38 +858,19 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) * side waiters as the file is closing so user count on the file * side is zero. */ - spin_lock_irqsave(&tty_ldisc_lock, flags); - while (tty->ldisc.refcount) { - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); - spin_lock_irqsave(&tty_ldisc_lock, flags); - } - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + + tty_ldisc_wait_idle(tty); + /* * Shutdown the current line discipline, and reset it to N_TTY. * * FIXME: this MUST get fixed for the new reflocking */ - if (tty->ldisc.ops->close) - (tty->ldisc.ops->close)(tty); - tty_ldisc_put(tty->ldisc.ops); - /* - * Switch the line discipline back - */ - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(tty, &ld); - tty_set_termios_ldisc(tty, N_TTY); - if (o_tty) { - /* FIXME: could o_tty be in setldisc here ? */ - clear_bit(TTY_LDISC, &o_tty->flags); - if (o_tty->ldisc.ops->close) - (o_tty->ldisc.ops->close)(o_tty); - tty_ldisc_put(o_tty->ldisc.ops); - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(o_tty, &ld); - tty_set_termios_ldisc(o_tty, N_TTY); - } + tty_ldisc_reinit(tty); + /* This will need doing differently if we need to lock */ + if (o_tty) + tty_ldisc_release(o_tty, NULL); } /** @@ -712,10 +883,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) void tty_ldisc_init(struct tty_struct *tty) { - struct tty_ldisc ld; - if (tty_ldisc_get(N_TTY, &ld) < 0) + struct tty_ldisc *ld = tty_ldisc_get(N_TTY); + if (IS_ERR(ld)) panic("n_tty: init_tty"); - tty_ldisc_assign(tty, &ld); + tty_ldisc_assign(tty, ld); } void tty_ldisc_begin(void) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 9b8004c7268..62dadfc95e3 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -137,7 +137,7 @@ int tty_port_carrier_raised(struct tty_port *port) EXPORT_SYMBOL(tty_port_carrier_raised); /** - * tty_port_raise_dtr_rts - Riase DTR/RTS + * tty_port_raise_dtr_rts - Raise DTR/RTS * @port: tty port * * Wrapper for the DTR/RTS raise logic. For the moment this is used @@ -147,12 +147,28 @@ EXPORT_SYMBOL(tty_port_carrier_raised); void tty_port_raise_dtr_rts(struct tty_port *port) { - if (port->ops->raise_dtr_rts) - port->ops->raise_dtr_rts(port); + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 1); } EXPORT_SYMBOL(tty_port_raise_dtr_rts); /** + * tty_port_lower_dtr_rts - Lower DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +void tty_port_lower_dtr_rts(struct tty_port *port) +{ + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 0); +} +EXPORT_SYMBOL(tty_port_lower_dtr_rts); + +/** * tty_port_block_til_ready - Waiting logic for tty open * @port: the tty port being opened * @tty: the tty device being bound @@ -167,7 +183,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts); * - port flags and counts * * The passed tty_port must implement the carrier_raised method if it can - * do carrier detect and the raise_dtr_rts method if it supports software + * do carrier detect and the dtr_rts method if it supports software * management of these lines. Note that the dtr/rts raise is done each * iteration as a hangup may have previously dropped them while we wait. */ @@ -182,7 +198,8 @@ int tty_port_block_til_ready(struct tty_port *port, /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->close_wait); + wait_event_interruptible(port->close_wait, + !(port->flags & ASYNC_CLOSING)); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else @@ -205,7 +222,6 @@ int tty_port_block_til_ready(struct tty_port *port, before the next open may complete */ retval = 0; - add_wait_queue(&port->open_wait, &wait); /* The port lock protects the port counts */ spin_lock_irqsave(&port->lock, flags); @@ -219,7 +235,7 @@ int tty_port_block_til_ready(struct tty_port *port, if (tty->termios->c_cflag & CBAUD) tty_port_raise_dtr_rts(port); - set_current_state(TASK_INTERRUPTIBLE); + prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); /* Check for a hangup or uninitialised port. Return accordingly */ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { if (port->flags & ASYNC_HUP_NOTIFY) @@ -240,8 +256,7 @@ int tty_port_block_til_ready(struct tty_port *port, } schedule(); } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); + finish_wait(&port->open_wait, &wait); /* Update counts. A parallel hangup will have set count to zero and we must not mess that up further */ @@ -292,6 +307,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f if (port->flags & ASYNC_INITIALIZED && port->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, port->closing_wait); + if (port->drain_delay) { + unsigned int bps = tty_get_baud_rate(tty); + long timeout; + + if (bps > 1200) + timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps, + HZ / 10); + else + timeout = 2 * HZ; + schedule_timeout_interruptible(timeout); + } return 1; } EXPORT_SYMBOL(tty_port_close_start); @@ -302,6 +328,9 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) tty_ldisc_flush(tty); + if (tty->termios->c_cflag & HUPCL) + tty_port_lower_dtr_rts(port); + spin_lock_irqsave(&port->lock, flags); tty->closing = 0; diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 08151d4de48..c796a86ab7f 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -95,7 +95,6 @@ #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/workqueue.h> -#include <linux/bootmem.h> #include <linux/pm.h> #include <linux/font.h> #include <linux/bitops.h> @@ -2875,14 +2874,11 @@ static int __init con_init(void) mod_timer(&console_timer, jiffies + blankinterval); } - /* - * kmalloc is not running yet - we use the bootmem allocator. - */ for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { - vc_cons[currcons].d = vc = alloc_bootmem(sizeof(struct vc_data)); + vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT); INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); - vc->vc_screenbuf = (unsigned short *)alloc_bootmem(vc->vc_screenbuf_size); + vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); vc->vc_kmalloced = 0; vc_init(vc, vc->vc_rows, vc->vc_cols, currcons || !vc->vc_sw->con_save_screen); |