diff options
Diffstat (limited to 'drivers/char')
29 files changed, 1464 insertions, 86 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 39a9f8cc641..2af12fc4511 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -409,14 +409,6 @@ config SGI_MBCS If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. -config MSPEC - tristate "Memory special operations driver" - depends on IA64 - help - If you have an ia64 and you want to enable memory special - operations support (formerly known as fetchop), say Y here, - otherwise say N. - source "drivers/serial/Kconfig" config UNIX98_PTYS diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index c3920016168..5ff457b41ef 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -1054,7 +1054,7 @@ void *agp_generic_alloc_page(struct agp_bridge_data *bridge) { struct page * page; - page = alloc_page(GFP_KERNEL); + page = alloc_page(GFP_KERNEL | GFP_DMA32); if (page == NULL) return NULL; diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index d1ede7db5a1..555b3a8ab49 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -169,7 +169,7 @@ static void *i8xx_alloc_pages(void) { struct page * page; - page = alloc_pages(GFP_KERNEL, 2); + page = alloc_pages(GFP_KERNEL | GFP_DMA32, 2); if (page == NULL) return NULL; @@ -387,11 +387,7 @@ static void intel_i830_init_gtt_entries(void) /* We obtain the size of the GTT, which is also stored (for some * reason) at the top of stolen memory. Then we add 4KB to that * for the video BIOS popup, which is also stored in there. */ - - if (IS_I965) - size = 512 + 4; - else - size = agp_bridge->driver->fetch_size() + 4; + size = agp_bridge->driver->fetch_size() + 4; if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82830_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) { @@ -805,6 +801,26 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) return 0; } + +/* + * The i965 supports 36-bit physical addresses, but to keep + * the format of the GTT the same, the bits that don't fit + * in a 32-bit word are shifted down to bits 4..7. + * + * Gcc is smart enough to notice that "(addr >> 28) & 0xf0" + * is always zero on 32-bit architectures, so no need to make + * this conditional. + */ +static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge, + unsigned long addr, int type) +{ + /* Shift high bits down */ + addr |= (addr >> 28) & 0xf0; + + /* Type checking must be done elsewhere */ + return addr | bridge->driver->masks[type].mask; +} + static int intel_i965_fetch_size(void) { struct aper_size_info_fixed *values; @@ -832,7 +848,8 @@ static int intel_i965_fetch_size(void) agp_bridge->previous_size = agp_bridge->current_size = (void *)(values + offset); - return values[offset].size; + /* The i965 GTT is always sized as if it had a 512kB aperture size */ + return 512; } /* The intel i965 automatically initializes the agp aperture during POST. @@ -1584,7 +1601,7 @@ static struct agp_bridge_driver intel_i965_driver = { .fetch_size = intel_i965_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i810_mask_memory, + .mask_memory = intel_i965_mask_memory, .masks = intel_i810_masks, .agp_enable = intel_i810_agp_enable, .cache_flush = global_cache_flush, diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 91b71e750ee..dffc19382f7 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -27,32 +27,42 @@ static int uninorth_rev; static int is_u3; +static char __devinitdata *aperture = NULL; static int uninorth_fetch_size(void) { - int i; - u32 temp; - struct aper_size_info_32 *values; - - pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_BASE, &temp); - temp &= ~(0xfffff000); - values = A_SIZE_32(agp_bridge->driver->aperture_sizes); - - for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) { - if (temp == values[i].size_value) { - agp_bridge->previous_size = - agp_bridge->current_size = (void *) (values + i); - agp_bridge->aperture_size_idx = i; - return values[i].size; + int i, size = 0; + struct aper_size_info_32 *values = + A_SIZE_32(agp_bridge->driver->aperture_sizes); + + if (aperture) { + char *save = aperture; + + size = memparse(aperture, &aperture) >> 20; + aperture = save; + + for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) + if (size == values[i].size) + break; + + if (i == agp_bridge->driver->num_aperture_sizes) { + printk(KERN_ERR PFX "Invalid aperture size, using" + " default\n"); + size = 0; + aperture = NULL; } } - agp_bridge->previous_size = - agp_bridge->current_size = (void *) (values + 1); - agp_bridge->aperture_size_idx = 1; - return values[1].size; + if (!size) { + for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) + if (values[i].size == 32) + break; + } - return 0; + agp_bridge->previous_size = + agp_bridge->current_size = (void *)(values + i); + agp_bridge->aperture_size_idx = i; + return values[i].size; } static void uninorth_tlbflush(struct agp_memory *mem) @@ -683,5 +693,11 @@ static void __exit agp_uninorth_cleanup(void) module_init(agp_uninorth_init); module_exit(agp_uninorth_cleanup); +module_param(aperture, charp, 0); +MODULE_PARM_DESC(aperture, + "Aperture size, must be power of two between 4MB and an\n" + "\t\tupper limit specific to the UniNorth revision.\n" + "\t\tDefault: 32M"); + MODULE_AUTHOR("Ben Herrenschmidt & Paul Mackerras"); MODULE_LICENSE("GPL"); diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 029baea33b6..6eafff13dab 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -237,6 +237,8 @@ static int drm_addmap_core(drm_device_t * dev, unsigned int offset, list = drm_alloc(sizeof(*list), DRM_MEM_MAPS); if (!list) { + if (map->type == _DRM_REGISTERS) + drm_ioremapfree(map->handle, map->size, dev); drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; } @@ -252,6 +254,8 @@ static int drm_addmap_core(drm_device_t * dev, unsigned int offset, map->offset; ret = drm_map_handle(dev, &list->hash, user_token, 0); if (ret) { + if (map->type == _DRM_REGISTERS) + drm_ioremapfree(map->handle, map->size, dev); drm_free(map, sizeof(*map), DRM_MEM_MAPS); drm_free(list, sizeof(*list), DRM_MEM_MAPS); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c index 51ad98c685c..ba4b8de83cf 100644 --- a/drivers/char/drm/drm_sysfs.c +++ b/drivers/char/drm/drm_sysfs.c @@ -42,13 +42,24 @@ static CLASS_ATTR(version, S_IRUGO, version_show, NULL); struct class *drm_sysfs_create(struct module *owner, char *name) { struct class *class; + int err; class = class_create(owner, name); - if (!class) - return class; + if (!class) { + err = -ENOMEM; + goto err_out; + } + + err = class_create_file(class, &class_attr_version); + if (err) + goto err_out_class; - class_create_file(class, &class_attr_version); return class; + +err_out_class: + class_destroy(class); +err_out: + return ERR_PTR(err); } /** @@ -96,20 +107,36 @@ static struct class_device_attribute class_device_attrs[] = { struct class_device *drm_sysfs_device_add(struct class *cs, drm_head_t *head) { struct class_device *class_dev; - int i; + int i, j, err; class_dev = class_device_create(cs, NULL, MKDEV(DRM_MAJOR, head->minor), &(head->dev->pdev)->dev, "card%d", head->minor); - if (!class_dev) - return NULL; + if (!class_dev) { + err = -ENOMEM; + goto err_out; + } class_set_devdata(class_dev, head); - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_create_file(class_dev, &class_device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { + err = class_device_create_file(class_dev, + &class_device_attrs[i]); + if (err) + goto err_out_files; + } + return class_dev; + +err_out_files: + if (i > 0) + for (j = 0; j < i; j++) + class_device_remove_file(class_dev, + &class_device_attrs[i]); + class_device_unregister(class_dev); +err_out: + return ERR_PTR(err); } /** diff --git a/drivers/char/drm/mga_drv.c b/drivers/char/drm/mga_drv.c index e30f556b79f..be49dbb9ec3 100644 --- a/drivers/char/drm/mga_drv.c +++ b/drivers/char/drm/mga_drv.c @@ -47,6 +47,7 @@ static struct drm_driver driver = { DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, + .dev_priv_size = sizeof(drm_mga_buf_priv_t), .load = mga_driver_load, .unload = mga_driver_unload, .lastclose = mga_driver_lastclose, diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index 26bdf2ca59d..d14477ba367 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -538,6 +538,36 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv, return 0; } +static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv, + drm_radeon_kcmd_buffer_t *cmdbuf) +{ + u32 *cmd = (u32 *) cmdbuf->buf; + int count, ret; + RING_LOCALS; + + count=(cmd[0]>>16) & 0x3fff; + + if ((cmd[1] & 0x8000ffff) != 0x80000810) { + DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]); + return DRM_ERR(EINVAL); + } + ret = r300_check_offset(dev_priv, cmd[2]); + if (ret) { + DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]); + return DRM_ERR(EINVAL); + } + + BEGIN_RING(count+2); + OUT_RING(cmd[0]); + OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1); + ADVANCE_RING(); + + cmdbuf->buf += (count+2)*4; + cmdbuf->bufsz -= (count+2)*4; + + return 0; +} + static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, drm_radeon_kcmd_buffer_t *cmdbuf) { @@ -578,10 +608,11 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, case RADEON_CNTL_BITBLT_MULTI: return r300_emit_bitblt_multi(dev_priv, cmdbuf); + case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ + return r300_emit_indx_buffer(dev_priv, cmdbuf); case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */ case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */ case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */ - case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ case RADEON_WAIT_FOR_IDLE: case RADEON_CP_NOP: /* these packets are safe */ diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index feac5f005d4..6e04fdd732a 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -275,6 +275,8 @@ static __inline__ int radeon_check_and_fixup_packet3(drm_radeon_private_t * unsigned int *cmdsz) { u32 *cmd = (u32 *) cmdbuf->buf; + u32 offset, narrays; + int count, i, k; *cmdsz = 2 + ((cmd[0] & RADEON_CP_PACKET_COUNT_MASK) >> 16); @@ -288,10 +290,106 @@ static __inline__ int radeon_check_and_fixup_packet3(drm_radeon_private_t * return DRM_ERR(EINVAL); } - /* Check client state and fix it up if necessary */ - if (cmd[0] & 0x8000) { /* MSB of opcode: next DWORD GUI_CNTL */ - u32 offset; + switch(cmd[0] & 0xff00) { + /* XXX Are there old drivers needing other packets? */ + case RADEON_3D_DRAW_IMMD: + case RADEON_3D_DRAW_VBUF: + case RADEON_3D_DRAW_INDX: + case RADEON_WAIT_FOR_IDLE: + case RADEON_CP_NOP: + case RADEON_3D_CLEAR_ZMASK: +/* case RADEON_CP_NEXT_CHAR: + case RADEON_CP_PLY_NEXTSCAN: + case RADEON_CP_SET_SCISSORS: */ /* probably safe but will never need them? */ + /* these packets are safe */ + break; + + case RADEON_CP_3D_DRAW_IMMD_2: + case RADEON_CP_3D_DRAW_VBUF_2: + case RADEON_CP_3D_DRAW_INDX_2: + case RADEON_3D_CLEAR_HIZ: + /* safe but r200 only */ + if (dev_priv->microcode_version != UCODE_R200) { + DRM_ERROR("Invalid 3d packet for r100-class chip\n"); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_3D_LOAD_VBPNTR: + count = (cmd[0] >> 16) & 0x3fff; + + if (count > 18) { /* 12 arrays max */ + DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n", + count); + return DRM_ERR(EINVAL); + } + + /* carefully check packet contents */ + narrays = cmd[1] & ~0xc000; + k = 0; + i = 2; + while ((k < narrays) && (i < (count + 2))) { + i++; /* skip attribute field */ + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[i])) { + DRM_ERROR + ("Invalid offset (k=%d i=%d) in 3D_LOAD_VBPNTR packet.\n", + k, i); + return DRM_ERR(EINVAL); + } + k++; + i++; + if (k == narrays) + break; + /* have one more to process, they come in pairs */ + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[i])) { + DRM_ERROR + ("Invalid offset (k=%d i=%d) in 3D_LOAD_VBPNTR packet.\n", + k, i); + return DRM_ERR(EINVAL); + } + k++; + i++; + } + /* do the counts match what we expect ? */ + if ((k != narrays) || (i != (count + 2))) { + DRM_ERROR + ("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n", + k, i, narrays, count + 1); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_3D_RNDR_GEN_INDX_PRIM: + if (dev_priv->microcode_version != UCODE_R100) { + DRM_ERROR("Invalid 3d packet for r200-class chip\n"); + return DRM_ERR(EINVAL); + } + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[1])) { + DRM_ERROR("Invalid rndr_gen_indx offset\n"); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_CP_INDX_BUFFER: + if (dev_priv->microcode_version != UCODE_R200) { + DRM_ERROR("Invalid 3d packet for r100-class chip\n"); + return DRM_ERR(EINVAL); + } + if ((cmd[1] & 0x8000ffff) != 0x80000810) { + DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]); + return DRM_ERR(EINVAL); + } + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[2])) { + DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_CNTL_HOSTDATA_BLT: + case RADEON_CNTL_PAINT_MULTI: + case RADEON_CNTL_BITBLT_MULTI: + /* MSB of opcode: next DWORD GUI_CNTL */ if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL | RADEON_GMC_DST_PITCH_OFFSET_CNTL)) { offset = cmd[2] << 10; @@ -313,6 +411,11 @@ static __inline__ int radeon_check_and_fixup_packet3(drm_radeon_private_t * } cmd[3] = (cmd[3] & 0xffc00000) | offset >> 10; } + break; + + default: + DRM_ERROR("Invalid packet type %x\n", cmd[0] & 0xff00); + return DRM_ERR(EINVAL); } return 0; diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c index 59c7520bf9a..a9a84f88df5 100644 --- a/drivers/char/drm/savage_bci.c +++ b/drivers/char/drm/savage_bci.c @@ -728,6 +728,7 @@ static int savage_do_init_bci(drm_device_t * dev, drm_savage_init_t * init) dev_priv->status = NULL; } if (dev_priv->dma_type == SAVAGE_DMA_AGP && init->buffers_offset) { + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if (!dev->agp_buffer_map) { diff --git a/drivers/char/drm/savage_state.c b/drivers/char/drm/savage_state.c index ef2581d1614..1ca1e9cb5a3 100644 --- a/drivers/char/drm/savage_state.c +++ b/drivers/char/drm/savage_state.c @@ -994,7 +994,7 @@ int savage_bci_cmdbuf(DRM_IOCTL_ARGS) if (cmdbuf.size) { kcmd_addr = drm_alloc(cmdbuf.size * 8, DRM_MEM_DRIVER); if (kcmd_addr == NULL) - return ENOMEM; + return DRM_ERR(ENOMEM); if (DRM_COPY_FROM_USER(kcmd_addr, cmdbuf.cmd_addr, cmdbuf.size * 8)) diff --git a/drivers/char/ftape/zftape/zftape-buffers.c b/drivers/char/ftape/zftape/zftape-buffers.c index da06f138334..7ebce2ec789 100644 --- a/drivers/char/ftape/zftape/zftape-buffers.c +++ b/drivers/char/ftape/zftape/zftape-buffers.c @@ -85,7 +85,7 @@ int zft_vmalloc_once(void *new, size_t size) peak_memory = used_memory; } TRACE_ABORT(0, ft_t_noise, - "allocated buffer @ %p, %d bytes", *(void **)new, size); + "allocated buffer @ %p, %zd bytes", *(void **)new, size); } int zft_vmalloc_always(void *new, size_t size) { @@ -101,7 +101,7 @@ void zft_vfree(void *old, size_t size) if (*(void **)old) { vfree(*(void **)old); used_memory -= size; - TRACE(ft_t_noise, "released buffer @ %p, %d bytes", + TRACE(ft_t_noise, "released buffer @ %p, %zd bytes", *(void **)old, size); *(void **)old = NULL; } diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 34a4fd13fa8..c47add8e47d 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -376,13 +376,23 @@ static void free_recv_msg_list(struct list_head *q) } } +static void free_smi_msg_list(struct list_head *q) +{ + struct ipmi_smi_msg *msg, *msg2; + + list_for_each_entry_safe(msg, msg2, q, link) { + list_del(&msg->link); + ipmi_free_smi_msg(msg); + } +} + static void clean_up_interface_data(ipmi_smi_t intf) { int i; struct cmd_rcvr *rcvr, *rcvr2; struct list_head list; - free_recv_msg_list(&intf->waiting_msgs); + free_smi_msg_list(&intf->waiting_msgs); free_recv_msg_list(&intf->waiting_events); /* Wholesale remove all the entries from the list in the @@ -1844,7 +1854,7 @@ static ssize_t provides_dev_sdrs_show(struct device *dev, struct bmc_device *bmc = dev_get_drvdata(dev); return snprintf(buf, 10, "%u\n", - bmc->id.device_revision && 0x80 >> 7); + (bmc->id.device_revision & 0x80) >> 7); } static ssize_t revision_show(struct device *dev, struct device_attribute *attr, @@ -1853,7 +1863,7 @@ static ssize_t revision_show(struct device *dev, struct device_attribute *attr, struct bmc_device *bmc = dev_get_drvdata(dev); return snprintf(buf, 20, "%u\n", - bmc->id.device_revision && 0x0F); + bmc->id.device_revision & 0x0F); } static ssize_t firmware_rev_show(struct device *dev, @@ -2108,7 +2118,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf) dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); - rv = platform_device_register(bmc->dev); + rv = platform_device_add(bmc->dev); mutex_unlock(&ipmidriver_mutex); if (rv) { printk(KERN_ERR @@ -3232,7 +3242,9 @@ void ipmi_smi_msg_received(ipmi_smi_t intf, report the error immediately. */ if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) - && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)) + && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR) + && (msg->rsp[2] != IPMI_BUS_ERR) + && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) { int chan = msg->rsp[3] & 0xf; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index e5cfb1fa47d..bb1fac104fd 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1211,7 +1211,7 @@ static void intf_mem_outb(struct si_sm_io *io, unsigned int offset, static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset) { return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void intf_mem_outw(struct si_sm_io *io, unsigned int offset, @@ -1223,7 +1223,7 @@ static void intf_mem_outw(struct si_sm_io *io, unsigned int offset, static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset) { return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void intf_mem_outl(struct si_sm_io *io, unsigned int offset, @@ -1236,7 +1236,7 @@ static void intf_mem_outl(struct si_sm_io *io, unsigned int offset, static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset) { return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void mem_outq(struct si_sm_io *io, unsigned int offset, @@ -1867,7 +1867,7 @@ static int ipmi_pci_resume(struct pci_dev *pdev) static struct pci_device_id ipmi_pci_devices[] = { { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) }, - { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) } + { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) } }; MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); @@ -2346,7 +2346,7 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->dev = &new_smi->pdev->dev; new_smi->dev->driver = &ipmi_driver; - rv = platform_device_register(new_smi->pdev); + rv = platform_device_add(new_smi->pdev); if (rv) { printk(KERN_ERR "ipmi_si_intf:" diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index e9e9bf31c36..58c955e390b 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1062,11 +1062,12 @@ static void isicom_shutdown_port(struct isi_port *port) static void isicom_close(struct tty_struct *tty, struct file *filp) { struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; + struct isi_board *card; unsigned long flags; if (!port) return; + card = port->card; if (isicom_paranoia_check(port, tty->name, "isicom_close")) return; diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index b401383808c..96cb1f07332 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -130,6 +130,7 @@ static moxa_isa_board_conf moxa_isa_boards[] = typedef struct _moxa_pci_devinfo { ushort busNum; ushort devNum; + struct pci_dev *pdev; } moxa_pci_devinfo; typedef struct _moxa_board_conf { @@ -324,6 +325,9 @@ static int moxa_get_PCI_conf(struct pci_dev *p, int board_type, moxa_board_conf board->busType = MOXA_BUS_TYPE_PCI; board->pciInfo.busNum = p->bus->number; board->pciInfo.devNum = p->devfn >> 3; + board->pciInfo.pdev = p; + /* don't lose the reference in the next pci_get_device iteration */ + pci_dev_get(p); return (0); } @@ -493,6 +497,11 @@ static void __exit moxa_exit(void) if (tty_unregister_driver(moxaDriver)) printk("Couldn't unregister MOXA Intellio family serial driver\n"); put_tty_driver(moxaDriver); + + for (i = 0; i < MAX_BOARDS; i++) + if (moxa_boards[i].busType == MOXA_BUS_TYPE_PCI) + pci_dev_put(moxa_boards[i].pciInfo.pdev); + if (verbose) printk("Done\n"); } diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 5c0dec39cf6..235e8922611 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -72,7 +72,11 @@ enum { MSPEC_UNCACHED }; +#ifdef CONFIG_SGI_SN static int is_sn2; +#else +#define is_sn2 0 +#endif /* * One of these structures is allocated when an mspec region is mmaped. The @@ -211,7 +215,7 @@ mspec_nopfn(struct vm_area_struct *vma, unsigned long address) if (vdata->type == MSPEC_FETCHOP) paddr = TO_AMO(maddr); else - paddr = __pa(TO_CAC(maddr)); + paddr = maddr & ~__IA64_UNCACHED_OFFSET; pfn = paddr >> PAGE_SHIFT; @@ -335,6 +339,7 @@ mspec_init(void) * The fetchop device only works on SN2 hardware, uncached and cached * memory drivers should both be valid on all ia64 hardware */ +#ifdef CONFIG_SGI_SN if (ia64_platform_is("sn2")) { is_sn2 = 1; if (is_shub2()) { @@ -363,6 +368,7 @@ mspec_init(void) goto free_scratch_pages; } } +#endif ret = misc_register(&cached_miscdev); if (ret) { printk(KERN_ERR "%s: failed to register device %i\n", diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h index ee2ddea7a63..23d0681fe49 100644 --- a/drivers/char/rio/host.h +++ b/drivers/char/rio/host.h @@ -44,6 +44,7 @@ ** the host. */ struct Host { + struct pci_dev *pdev; unsigned char Type; /* RIO_EISA, RIO_MCA, ... */ unsigned char Ivec; /* POLLED or ivec number */ unsigned char Mode; /* Control stuff */ diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index c382df0f82f..7ac68cb3bed 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -1017,6 +1017,10 @@ static int __init rio_init(void) rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); fix_rio_pci(pdev); + + p->RIOHosts[p->RIONumHosts].pdev = pdev; + pci_dev_get(pdev); + p->RIOLastPCISearch = 0; p->RIONumHosts++; found++; @@ -1066,6 +1070,9 @@ static int __init rio_init(void) ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); + p->RIOHosts[p->RIONumHosts].pdev = pdev; + pci_dev_get(pdev); + p->RIOLastPCISearch = 0; p->RIONumHosts++; found++; @@ -1181,6 +1188,8 @@ static void __exit rio_exit(void) } /* It is safe/allowed to del_timer a non-active timer */ del_timer(&hp->timer); + if (hp->Type == RIO_PCI) + pci_dev_put(hp->pdev); } if (misc_deregister(&rio_fw_device) < 0) { diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c index 2444a0e24b3..244d30a03fe 100644 --- a/drivers/char/tlclk.c +++ b/drivers/char/tlclk.c @@ -792,15 +792,14 @@ static int __init tlclk_init(void) ret = misc_register(&tlclk_miscdev); if (ret < 0) { printk(KERN_ERR "tlclk: misc_register returns %d.\n", ret); - ret = -EBUSY; goto out3; } tlclk_device = platform_device_register_simple("telco_clock", -1, NULL, 0); - if (!tlclk_device) { + if (IS_ERR(tlclk_device)) { printk(KERN_ERR "tlclk: platform_device_register failed.\n"); - ret = -EBUSY; + ret = PTR_ERR(tlclk_device); goto out4; } diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 89e46d6dfc4..0187b118532 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -13,7 +13,7 @@ config WATCHDOG subsequently opening the file and then failing to write to it for longer than 1 minute will result in rebooting the machine. This could be useful for a networked machine that needs to come back - online as fast as possible after a lock-up. There's both a watchdog + on-line as fast as possible after a lock-up. There's both a watchdog implementation entirely in software (which can sometimes fail to reboot the machine) and a driver for hardware watchdog boards, which are more robust and can also keep track of the temperature inside @@ -60,7 +60,7 @@ config SOFT_WATCHDOG # ARM Architecture -config AT91_WATCHDOG +config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" depends on WATCHDOG && ARCH_AT91RM9200 help @@ -71,7 +71,7 @@ config 21285_WATCHDOG tristate "DC21285 watchdog" depends on WATCHDOG && FOOTBRIDGE help - The Intel Footbridge chip contains a builtin watchdog circuit. Say Y + The Intel Footbridge chip contains a built-in watchdog circuit. Say Y here if you wish to use this. Alternatively say M to compile the driver as a module, which will be called wdt285. @@ -269,11 +269,11 @@ config IB700_WDT Most people will say N. config IBMASR - tristate "IBM Automatic Server Restart" - depends on WATCHDOG && X86 - help + tristate "IBM Automatic Server Restart" + depends on WATCHDOG && X86 + help This is the driver for the IBM Automatic Server Restart watchdog - timer builtin into some eServer xSeries machines. + timer built-in into some eServer xSeries machines. To compile this driver as a module, choose M here: the module will be called ibmasr. @@ -316,13 +316,16 @@ config I8XX_TCO To compile this driver as a module, choose M here: the module will be called i8xx_tco. + Note: This driver will be removed in the near future. Please + use the Intel TCO Timer/Watchdog driver. + config ITCO_WDT - tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)" - depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL + tristate "Intel TCO Timer/Watchdog" + depends on WATCHDOG && (X86 || IA64) && PCI ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller - Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB + Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB controller hub. The TCO (Total Cost of Ownership) timer is a watchdog timer @@ -395,6 +398,26 @@ config CPU5_WDT To compile this driver as a module, choose M here: the module will be called cpu5wdt. +config SMSC37B787_WDT + tristate "Winbond SMsC37B787 Watchdog Timer" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog component on the + Winbond SMsC37B787 chipset as used on the NetRunner Mainboard + from Vision Systems and maybe others. + + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + Usually a userspace daemon will notify the kernel WDT driver that + userspace is still alive, at regular intervals. + + To compile this driver as a module, choose M here: the + module will be called smsc37b787_wdt. + + Most people will say N. + config W83627HF_WDT tristate "W83627HF Watchdog Timer" depends on WATCHDOG && X86 @@ -410,6 +433,21 @@ config W83627HF_WDT Most people will say N. +config W83697HF_WDT + tristate "W83697HF/W83697HG Watchdog Timer" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog on the W83697HF/HG + chipset as used in Dedibox/VIA motherboards (and likely others). + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + To compile this driver as a module, choose M here: the + module will be called w83697hf_wdt. + + Most people will say N. + config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" depends on WATCHDOG && X86 @@ -443,7 +481,7 @@ config MACHZ_WDT depends on WATCHDOG && X86 ---help--- If you are using a ZF Micro MachZ processor, say Y here, otherwise - N. This is the driver for the watchdog timer builtin on that + N. This is the driver for the watchdog timer built-in on that processor using ZF-Logic interface. This watchdog simply watches your kernel to make sure it doesn't freeze, and if it does, it reboots your computer after a certain amount of time. @@ -472,7 +510,6 @@ config SBC_EPX_C3_WATCHDOG To compile this driver as a module, choose M here: the module will be called sbc_epx_c3. - # PowerPC Architecture config 8xx_WDT @@ -502,7 +539,7 @@ config WATCHDOG_RTAS help This driver adds watchdog support for the RTAS watchdog. - To compile this driver as a module, choose M here. The module + To compile this driver as a module, choose M here. The module will be called wdrtas. # MIPS Architecture @@ -556,7 +593,7 @@ config SH_WDT_MMAP help If you say Y here, user applications will be able to mmap the WDT/CPG registers. -# + # SPARC64 Architecture config WATCHDOG_CP1XXX diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 7f70abad465..36440497047 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_WDTPCI) += wdt_pci.o obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o # ARM Architecture -obj-$(CONFIG_AT91_WATCHDOG) += at91_wdt.o +obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o obj-$(CONFIG_21285_WATCHDOG) += wdt285.o obj-$(CONFIG_977_WATCHDOG) += wdt977.o @@ -53,7 +53,9 @@ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o +obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o +obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o obj-$(CONFIG_MACHZ_WDT) += machzwd.o diff --git a/drivers/char/watchdog/at91_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c index 4e7a1145e78..4e7a1145e78 100644 --- a/drivers/char/watchdog/at91_wdt.c +++ b/drivers/char/watchdog/at91rm9200_wdt.c diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c index aaac94db0d8..b6f29cb8bd3 100644 --- a/drivers/char/watchdog/iTCO_wdt.c +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -35,6 +35,10 @@ * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, + * 82801HB (ICH8) : document number 313056-002, 313057-004, + * 82801HR (ICH8R) : document number 313056-002, 313057-004, + * 82801HH (ICH8DH) : document number 313056-002, 313057-004, + * 82801HO (ICH8DO) : document number 313056-002, 313057-004, * 6300ESB (6300ESB) : document number 300641-003 */ @@ -45,7 +49,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" #define DRV_VERSION "1.00" -#define DRV_RELDATE "30-Jul-2006" +#define DRV_RELDATE "08-Oct-2006" #define PFX DRV_NAME ": " /* Includes */ @@ -85,6 +89,9 @@ enum iTCO_chipsets { TCO_ICH7, /* ICH7 & ICH7R */ TCO_ICH7M, /* ICH7-M */ TCO_ICH7MDH, /* ICH7-M DH */ + TCO_ICH8, /* ICH8 & ICH8R */ + TCO_ICH8DH, /* ICH8DH */ + TCO_ICH8DO, /* ICH8DO */ }; static struct { @@ -108,6 +115,9 @@ static struct { {"ICH7 or ICH7R", 2}, {"ICH7-M", 2}, {"ICH7-M DH", 2}, + {"ICH8 or ICH8R", 2}, + {"ICH8DH", 2}, + {"ICH8DO", 2}, {NULL,0} }; @@ -135,6 +145,9 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO }, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); @@ -355,7 +368,8 @@ static int iTCO_wdt_get_timeleft (int *time_left) spin_unlock(&iTCO_wdt_private.io_lock); *time_left = (val8 * 6) / 10; - } + } else + return -EINVAL; return 0; } @@ -426,7 +440,6 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, { int new_options, retval = -EINVAL; int new_heartbeat; - int time_left; void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { @@ -486,6 +499,8 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, case WDIOC_GETTIMELEFT: { + int time_left; + if (iTCO_wdt_get_timeleft(&time_left)) return -EINVAL; diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 68b1ca976d5..18cb050c386 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -380,18 +380,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { printk(KERN_INFO PFX "failed to get irq resource\n"); + iounmap(wdt_base); return -ENOENT; } ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev); if (ret != 0) { printk(KERN_INFO PFX "failed to install irq (%d)\n", ret); + iounmap(wdt_base); return ret; } wdt_clock = clk_get(&pdev->dev, "watchdog"); if (wdt_clock == NULL) { printk(KERN_INFO PFX "failed to find watchdog clock source\n"); + iounmap(wdt_base); return -ENOENT; } @@ -415,6 +418,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) if (ret) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); + iounmap(wdt_base); return ret; } @@ -451,6 +455,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) wdt_clock = NULL; } + iounmap(wdt_base); misc_deregister(&s3c2410wdt_miscdev); return 0; } diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c index d8d0f28e0ac..e3239833e4b 100644 --- a/drivers/char/watchdog/sc1200wdt.c +++ b/drivers/char/watchdog/sc1200wdt.c @@ -392,7 +392,7 @@ static int __init sc1200wdt_init(void) if (io == -1) { printk(KERN_ERR PFX "io parameter must be specified\n"); ret = -EINVAL; - goto out_clean; + goto out_pnp; } #if defined CONFIG_PNP @@ -405,7 +405,7 @@ static int __init sc1200wdt_init(void) if (!request_region(io, io_len, SC1200_MODULE_NAME)) { printk(KERN_ERR PFX "Unable to register IO port %#x\n", io); ret = -EBUSY; - goto out_clean; + goto out_pnp; } ret = sc1200wdt_probe(); @@ -435,6 +435,11 @@ out_rbt: out_io: release_region(io, io_len); +out_pnp: +#if defined CONFIG_PNP + if (isapnp) + pnp_unregister_driver(&scl200wdt_pnp_driver); +#endif goto out_clean; } diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c new file mode 100644 index 00000000000..9f56913b484 --- /dev/null +++ b/drivers/char/watchdog/smsc37b787_wdt.c @@ -0,0 +1,627 @@ +/* + * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x + * + * Based on acquirewdt.c by Alan Cox <alan@redhat.com> + * and some other existing drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The authors do NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * (C) Copyright 2003-2006 Sven Anders <anders@anduras.de> + * + * History: + * 2003 - Created version 1.0 for Linux 2.4.x. + * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE + * features. Released version 1.1 + * + * Theory of operation: + * + * A Watchdog Timer (WDT) is a hardware circuit that can + * reset the computer system in case of a software fault. + * You probably knew that already. + * + * Usually a userspace daemon will notify the kernel WDT driver + * via the /dev/watchdog special device file that userspace is + * still alive, at regular intervals. When such a notification + * occurs, the driver will usually tell the hardware watchdog + * that everything is in order, and that the watchdog should wait + * for yet another little while to reset the system. + * If userspace fails (RAM error, kernel bug, whatever), the + * notifications cease to occur, and the hardware watchdog will + * reset the system (causing a reboot) after the timeout occurs. + * + * Create device with: + * mknod /dev/watchdog c 10 130 + * + * For an example userspace keep-alive daemon, see: + * Documentation/watchdog/watchdog.txt + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +/* enable support for minutes as units? */ +/* (does not always work correctly, so disabled by default!) */ +#define SMSC_SUPPORT_MINUTES +#undef SMSC_SUPPORT_MINUTES + +#define MAX_TIMEOUT 255 + +#define UNIT_SECOND 0 +#define UNIT_MINUTE 1 + +#define MODNAME "smsc37b787_wdt: " +#define VERSION "1.1" + +#define IOPORT 0x3F0 +#define IOPORT_SIZE 2 +#define IODEV_NO 8 + +static int unit = UNIT_SECOND; /* timer's unit */ +static int timeout = 60; /* timeout value: default is 60 "units" */ +static unsigned long timer_enabled = 0; /* is the timer enabled? */ + +static char expect_close; /* is the close expected? */ + +static spinlock_t io_lock; /* to guard the watchdog from io races */ + +static int nowayout = WATCHDOG_NOWAYOUT; + +/* -- Low level function ----------------------------------------*/ + +/* unlock the IO chip */ + +static inline void open_io_config(void) +{ + outb(0x55, IOPORT); + mdelay(1); + outb(0x55, IOPORT); +} + +/* lock the IO chip */ +static inline void close_io_config(void) +{ + outb(0xAA, IOPORT); +} + +/* select the IO device */ +static inline void select_io_device(unsigned char devno) +{ + outb(0x07, IOPORT); + outb(devno, IOPORT+1); +} + +/* write to the control register */ +static inline void write_io_cr(unsigned char reg, unsigned char data) +{ + outb(reg, IOPORT); + outb(data, IOPORT+1); +} + +/* read from the control register */ +static inline char read_io_cr(unsigned char reg) +{ + outb(reg, IOPORT); + return inb(IOPORT+1); +} + +/* -- Medium level functions ------------------------------------*/ + +static inline void gpio_bit12(unsigned char reg) +{ + // -- General Purpose I/O Bit 1.2 -- + // Bit 0, In/Out: 0 = Output, 1 = Input + // Bit 1, Polarity: 0 = No Invert, 1 = Invert + // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, + // 11 = Either Edge Triggered Intr. 2 + // Bit 5/6 (Reserved) + // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + write_io_cr(0xE2, reg); +} + +static inline void gpio_bit13(unsigned char reg) +{ + // -- General Purpose I/O Bit 1.3 -- + // Bit 0, In/Out: 0 = Output, 1 = Input + // Bit 1, Polarity: 0 = No Invert, 1 = Invert + // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + // Bit 3, Function select: 0 = GPI/O, 1 = LED + // Bit 4-6 (Reserved) + // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + write_io_cr(0xE3, reg); +} + +static inline void wdt_timer_units(unsigned char new_units) +{ + // -- Watchdog timer units -- + // Bit 0-6 (Reserved) + // Bit 7, WDT Time-out Value Units Select + // (0 = Minutes, 1 = Seconds) + write_io_cr(0xF1, new_units); +} + +static inline void wdt_timeout_value(unsigned char new_timeout) +{ + // -- Watchdog Timer Time-out Value -- + // Bit 0-7 Binary coded units (0=Disabled, 1..255) + write_io_cr(0xF2, new_timeout); +} + +static inline void wdt_timer_conf(unsigned char conf) +{ + // -- Watchdog timer configuration -- + // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O + // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr. + // Bit 3 Reset the timer + // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled) + // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + write_io_cr(0xF3, conf); +} + +static inline void wdt_timer_ctrl(unsigned char reg) +{ + // -- Watchdog timer control -- + // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured + // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz + // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + // Bit 3 P20 Force Timeout enabled: + // 0 = P20 activity does not generate the WD timeout event + // 1 = P20 Allows rising edge of P20, from the keyboard + // controller, to force the WD timeout event. + // Bit 4 (Reserved) + // -- Soft power management -- + // Bit 5 Stop Counter: 1 = Stop software power down counter + // set via register 0xB8, (self-cleaning) + // (Upon read: 0 = Counter running, 1 = Counter stopped) + // Bit 6 Restart Counter: 1 = Restart software power down counter + // set via register 0xB8, (self-cleaning) + // Bit 7 SPOFF: 1 = Force software power down (self-cleaning) + + write_io_cr(0xF4, reg); +} + +/* -- Higher level functions ------------------------------------*/ + +/* initialize watchdog */ + +static void wb_smsc_wdt_initialize(void) +{ + unsigned char old; + + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // enable the watchdog + gpio_bit13(0x08); // Select pin 80 = LED not GPIO + gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert + + // disable the timeout + wdt_timeout_value(0); + + // reset control register + wdt_timer_ctrl(0x00); + + // reset configuration register + wdt_timer_conf(0x00); + + // read old (timer units) register + old = read_io_cr(0xF1) & 0x7F; + if (unit == UNIT_SECOND) old |= 0x80; // set to seconds + + // set the watchdog timer units + wdt_timer_units(old); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* shutdown the watchdog */ + +static void wb_smsc_wdt_shutdown(void) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // disable the watchdog + gpio_bit13(0x09); + gpio_bit12(0x09); + + // reset watchdog config register + wdt_timer_conf(0x00); + + // reset watchdog control register + wdt_timer_ctrl(0x00); + + // disable timeout + wdt_timeout_value(0x00); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* set timeout => enable watchdog */ + +static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // set Power LED to blink, if we enable the timeout + wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); + + // set timeout value + wdt_timeout_value(new_timeout); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* get timeout */ + +static unsigned char wb_smsc_wdt_get_timeout(void) +{ + unsigned char set_timeout; + + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + set_timeout = read_io_cr(0xF2); + close_io_config(); + spin_unlock(&io_lock); + + return set_timeout; +} + +/* disable watchdog */ + +static void wb_smsc_wdt_disable(void) +{ + // set the timeout to 0 to disable the watchdog + wb_smsc_wdt_set_timeout(0); +} + +/* enable watchdog by setting the current timeout */ + +static void wb_smsc_wdt_enable(void) +{ + // set the current timeout... + wb_smsc_wdt_set_timeout(timeout); +} + +/* reset the timer */ + +static void wb_smsc_wdt_reset_timer(void) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // reset the timer + wdt_timeout_value(timeout); + wdt_timer_conf(0x08); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* return, if the watchdog is enabled (timeout is set...) */ + +static int wb_smsc_wdt_status(void) +{ + return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING; +} + + +/* -- File operations -------------------------------------------*/ + +/* open => enable watchdog and set initial timeout */ + +static int wb_smsc_wdt_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + + if (test_and_set_bit(0, &timer_enabled)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Reload and activate timer */ + wb_smsc_wdt_enable(); + + printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + + return nonseekable_open(inode, file); +} + +/* close => shut off the timer */ + +static int wb_smsc_wdt_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. */ + + if (expect_close == 42) { + wb_smsc_wdt_disable(); + printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n"); + } else { + printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n"); + wb_smsc_wdt_reset_timer(); + } + + clear_bit(0, &timer_enabled); + expect_close = 0; + return 0; +} + +/* write => update the timer to keep the machine alive */ + +static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* reset expect flag */ + expect_close = 0; + + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + wb_smsc_wdt_reset_timer(); + } + return len; +} + +/* ioctl => control interface */ + +static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int new_timeout; + + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "SMsC 37B787 Watchdog" + }; + + uarg.i = (int __user *)arg; + + switch (cmd) { + default: + return -ENOTTY; + + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + return put_user(wb_smsc_wdt_status(), uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_KEEPALIVE: + wb_smsc_wdt_reset_timer(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + // the API states this is given in secs + if (unit == UNIT_MINUTE) + new_timeout /= 60; + + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + + timeout = new_timeout; + wb_smsc_wdt_set_timeout(timeout); + + // fall through and return the new timeout... + + case WDIOC_GETTIMEOUT: + + new_timeout = timeout; + + if (unit == UNIT_MINUTE) + new_timeout *= 60; + + return put_user(new_timeout, uarg.i); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + + return retval; + } + } +} + +/* -- Notifier funtions -----------------------------------------*/ + +static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + { + // set timeout to 0, to avoid possible race-condition + timeout = 0; + wb_smsc_wdt_disable(); + } + return NOTIFY_DONE; +} + +/* -- Module's structures ---------------------------------------*/ + +static struct file_operations wb_smsc_wdt_fops = +{ + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wb_smsc_wdt_write, + .ioctl = wb_smsc_wdt_ioctl, + .open = wb_smsc_wdt_open, + .release = wb_smsc_wdt_release, +}; + +static struct notifier_block wb_smsc_wdt_notifier = +{ + .notifier_call = wb_smsc_wdt_notify_sys, +}; + +static struct miscdevice wb_smsc_wdt_miscdev = +{ + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wb_smsc_wdt_fops, +}; + +/* -- Module init functions -------------------------------------*/ + +/* module's "constructor" */ + +static int __init wb_smsc_wdt_init(void) +{ + int ret; + + spin_lock_init(&io_lock); + + printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n"); + + if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { + printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT); + ret = -EBUSY; + goto out_pnp; + } + + // set new maximum, if it's too big + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; + + // init the watchdog timer + wb_smsc_wdt_initialize(); + + ret = register_reboot_notifier(&wb_smsc_wdt_notifier); + if (ret) { + printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret); + goto out_io; + } + + ret = misc_register(&wb_smsc_wdt_miscdev); + if (ret) { + printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + goto out_rbt; + } + + // output info + printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout); + + // ret = 0 + +out_clean: + return ret; + +out_rbt: + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + +out_io: + release_region(IOPORT, IOPORT_SIZE); + +out_pnp: + goto out_clean; +} + +/* module's "destructor" */ + +static void __exit wb_smsc_wdt_exit(void) +{ + /* Stop the timer before we leave */ + if (!nowayout) + { + wb_smsc_wdt_shutdown(); + printk(KERN_INFO MODNAME "Watchdog disabled.\n"); + } + + misc_deregister(&wb_smsc_wdt_miscdev); + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + release_region(IOPORT, IOPORT_SIZE); + + printk("SMsC 37B787 watchdog component driver removed.\n"); +} + +module_init(wb_smsc_wdt_init); +module_exit(wb_smsc_wdt_exit); + +MODULE_AUTHOR("Sven Anders <anders@anduras.de>"); +MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")"); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +#ifdef SMSC_SUPPORT_MINUTES +module_param(unit, int, 0); +MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0"); +#endif + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); + +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c index b4adc527e68..07d4bff2722 100644 --- a/drivers/char/watchdog/w83627hf_wdt.c +++ b/drivers/char/watchdog/w83627hf_wdt.c @@ -33,6 +33,7 @@ #include <linux/notifier.h> #include <linux/reboot.h> #include <linux/init.h> +#include <linux/spinlock.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -44,6 +45,7 @@ static unsigned long wdt_is_open; static char expect_close; +static spinlock_t io_lock; /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2E; @@ -110,12 +112,16 @@ w83627hf_init(void) static void wdt_ctrl(int timeout) { + spin_lock(&io_lock); + w83627hf_select_wd_register(); outb_p(0xF6, WDT_EFER); /* Select CRF6 */ outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */ w83627hf_unselect_wd_register(); + + spin_unlock(&io_lock); } static int @@ -303,6 +309,8 @@ wdt_init(void) { int ret; + spin_lock_init(&io_lock); + printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n"); if (wdt_set_heartbeat(timeout)) { diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c new file mode 100644 index 00000000000..7768b55487c --- /dev/null +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -0,0 +1,450 @@ +/* + * w83697hf/hg WDT driver + * + * (c) Copyright 2006 Samuel Tardieu <sam@rfc1149.net> + * (c) Copyright 2006 Marcus Junker <junker@anduras.de> + * + * Based on w83627hf_wdt.c which is based on advantechwdt.c + * which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 2003 Pádraig Brady <P@draigBrady.com> + * + * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> + * + * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. + * http://www.redhat.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Marcus Junker nor ANDURAS AG admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +#define WATCHDOG_NAME "w83697hf/hg WDT" +#define PFX WATCHDOG_NAME ": " +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ + +static unsigned long wdt_is_open; +static char expect_close; +static spinlock_t io_lock; + +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_io = 0x2e; +module_param(wdt_io, int, 0); +MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)"); + +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + +/* + * Kernel methods. + */ + +#define W83697HF_EFER (wdt_io+0) /* Extended Function Enable Register */ +#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ +#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */ + +static inline void +w83697hf_unlock(void) +{ + outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */ + outb_p(0x87, W83697HF_EFER); /* Again according to manual */ +} + +static inline void +w83697hf_lock(void) +{ + outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ +} + +/* + * The three functions w83697hf_get_reg(), w83697hf_set_reg() and + * w83697hf_write_timeout() must be called with the device unlocked. + */ + +static unsigned char +w83697hf_get_reg(unsigned char reg) +{ + outb_p(reg, W83697HF_EFIR); + return inb_p(W83697HF_EFDR); +} + +static void +w83697hf_set_reg(unsigned char reg, unsigned char data) +{ + outb_p(reg, W83697HF_EFIR); + outb_p(data, W83697HF_EFDR); +} + +static void +w83697hf_write_timeout(int timeout) +{ + w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ +} + +static void +w83697hf_select_wdt(void) +{ + w83697hf_unlock(); + w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */ +} + +static inline void +w83697hf_deselect_wdt(void) +{ + w83697hf_lock(); +} + +static void +w83697hf_init(void) +{ + unsigned char bbuf; + + w83697hf_select_wdt(); + + bbuf = w83697hf_get_reg(0x29); + bbuf &= ~0x60; + bbuf |= 0x20; + w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + + bbuf = w83697hf_get_reg(0xF3); + bbuf &= ~0x04; + w83697hf_set_reg(0xF3, bbuf); /* Count mode is seconds */ + + w83697hf_deselect_wdt(); +} + +static int +wdt_ping(void) +{ + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_write_timeout(timeout); + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + return 0; +} + +static int +wdt_enable(void) +{ + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_write_timeout(timeout); + w83697hf_set_reg(0x30, 1); /* Enable timer */ + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + return 0; +} + +static int +wdt_disable(void) +{ + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_set_reg(0x30, 0); /* Disable timer */ + w83697hf_write_timeout(0); + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + return 0; +} + +static int +wdt_set_heartbeat(int t) +{ + if ((t < 1) || (t > 255)) + return -EINVAL; + + timeout = t; + return 0; +} + +static ssize_t +wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + wdt_ping(); + } + return count; +} + +static int +wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_timeout; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "W83697HF WDT", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + wdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + retval = 0; + } + + return retval; + } + + default: + return -ENOTTY; + } + return 0; +} + +static int +wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + /* + * Activate + */ + + wdt_enable(); + return nonseekable_open(inode, file); +} + +static int +wdt_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + wdt_disable(); + } else { + printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + wdt_ping(); + } + expect_close = 0; + clear_bit(0, &wdt_is_open); + return 0; +} + +/* + * Notifier for system down + */ + +static int +wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) { + /* Turn the WDT off */ + wdt_disable(); + } + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt_write, + .ioctl = wdt_ioctl, + .open = wdt_open, + .release = wdt_close, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static int +w83697hf_check_wdt(void) +{ + if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { + printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io); + return -EIO; + } + + printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io); + w83697hf_unlock(); + if (w83697hf_get_reg(0x20) == 0x60) { + printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io); + w83697hf_lock(); + return 0; + } + w83697hf_lock(); /* Reprotect in case it was a compatible device */ + + printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); + release_region(wdt_io, 2); + return -EIO; +} + +static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 }; + +static int __init +wdt_init(void) +{ + int ret, i, found = 0; + + spin_lock_init(&io_lock); + + printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); + + if (wdt_io == 0) { + /* we will autodetect the W83697HF/HG watchdog */ + for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) { + wdt_io = w83697hf_ioports[i]; + if (!w83697hf_check_wdt()) + found++; + } + } else { + if (!w83697hf_check_wdt()) + found++; + } + + if (!found) { + printk (KERN_ERR PFX "No W83697HF/HG could be found\n"); + ret = -EIO; + goto out; + } + + w83697hf_init(); + wdt_disable(); /* Disable watchdog until first use */ + + if (wdt_set_heartbeat(timeout)) { + wdt_set_heartbeat(WATCHDOG_TIMEOUT); + printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", + WATCHDOG_TIMEOUT); + } + + ret = register_reboot_notifier(&wdt_notifier); + if (ret != 0) { + printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", + ret); + goto unreg_regions; + } + + ret = misc_register(&wdt_miscdev); + if (ret != 0) { + printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto unreg_reboot; + } + + printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + +out: + return ret; +unreg_reboot: + unregister_reboot_notifier(&wdt_notifier); +unreg_regions: + release_region(wdt_io, 2); + goto out; +} + +static void __exit +wdt_exit(void) +{ + misc_deregister(&wdt_miscdev); + unregister_reboot_notifier(&wdt_notifier); + release_region(wdt_io, 2); +} + +module_init(wdt_init); +module_exit(wdt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>"); +MODULE_DESCRIPTION("w83697hf/hg WDT driver"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |