aboutsummaryrefslogtreecommitdiff
path: root/drivers/edac
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/edac')
-rw-r--r--drivers/edac/amd64_edac.c181
1 files changed, 181 insertions, 0 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 24c031f7975..b4ef2c70500 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1185,4 +1185,185 @@ static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
return nr_pages;
}
+/*
+ * Get the number of DCT channels in use.
+ *
+ * Return:
+ * number of Memory Channels in operation
+ * Pass back:
+ * contents of the DCL0_LOW register
+ */
+static int f10_early_channel_count(struct amd64_pvt *pvt)
+{
+ int err = 0, channels = 0;
+ u32 dbam;
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
+ if (err)
+ goto err_reg;
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
+ if (err)
+ goto err_reg;
+
+ /* If we are in 128 bit mode, then we are using 2 channels */
+ if (pvt->dclr0 & F10_WIDTH_128) {
+ debugf0("Data WIDTH is 128 bits - 2 channels\n");
+ channels = 2;
+ return channels;
+ }
+
+ /*
+ * Need to check if in UN-ganged mode: In such, there are 2 channels,
+ * but they are NOT in 128 bit mode and thus the above 'dcl0' status bit
+ * will be OFF.
+ *
+ * Need to check DCT0[0] and DCT1[0] to see if only one of them has
+ * their CSEnable bit on. If so, then SINGLE DIMM case.
+ */
+ debugf0("Data WIDTH is NOT 128 bits - need more decoding\n");
+ /*
+ * Check DRAM Bank Address Mapping values for each DIMM to see if there
+ * is more than just one DIMM present in unganged mode. Need to check
+ * both controllers since DIMMs can be placed in either one.
+ */
+ channels = 0;
+ err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &dbam);
+ if (err)
+ goto err_reg;
+
+ if (DBAM_DIMM(0, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(1, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(2, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(3, dbam) > 0)
+ channels++;
+
+ /* If more than 2 DIMMs are present, then we have 2 channels */
+ if (channels > 2)
+ channels = 2;
+ else if (channels == 0) {
+ /* No DIMMs on DCT0, so look at DCT1 */
+ err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM1, &dbam);
+ if (err)
+ goto err_reg;
+
+ if (DBAM_DIMM(0, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(1, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(2, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(3, dbam) > 0)
+ channels++;
+
+ if (channels > 2)
+ channels = 2;
+ }
+
+ /* If we found ALL 0 values, then assume just ONE DIMM-ONE Channel */
+ if (channels == 0)
+ channels = 1;
+
+ debugf0("DIMM count= %d\n", channels);
+
+ return channels;
+
+err_reg:
+ return -1;
+
+}
+
+static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+{
+ return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
+}
+
+/* Enable extended configuration access via 0xCF8 feature */
+static void amd64_setup(struct amd64_pvt *pvt)
+{
+ u32 reg;
+
+ pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
+
+ pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG);
+ reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+ pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
+}
+
+/* Restore the extended configuration access via 0xCF8 feature */
+static void amd64_teardown(struct amd64_pvt *pvt)
+{
+ u32 reg;
+
+ pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
+
+ reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+ if (pvt->flags.cf8_extcfg)
+ reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+ pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
+}
+
+static u64 f10_get_error_address(struct mem_ctl_info *mci,
+ struct amd64_error_info_regs *info)
+{
+ return (((u64) (info->nbeah & 0xffff)) << 32) +
+ (info->nbeal & ~0x01);
+}
+
+/*
+ * Read the Base and Limit registers for F10 based Memory controllers. Extract
+ * fields from the 'raw' reg into separate data fields.
+ *
+ * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN.
+ */
+static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
+{
+ u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit;
+
+ low_offset = K8_DRAM_BASE_LOW + (dram << 3);
+ high_offset = F10_DRAM_BASE_HIGH + (dram << 3);
+
+ /* read the 'raw' DRAM BASE Address register */
+ pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_base);
+
+ /* Read from the ECS data register */
+ pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_base);
+
+ /* Extract parts into separate data entries */
+ pvt->dram_rw_en[dram] = (low_base & 0x3);
+
+ if (pvt->dram_rw_en[dram] == 0)
+ return;
+
+ pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
+
+ pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) |
+ ((u64) low_base & 0xFFFF0000))) << 8;
+
+ low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
+ high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
+
+ /* read the 'raw' LIMIT registers */
+ pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_limit);
+
+ /* Read from the ECS data register for the HIGH portion */
+ pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_limit);
+
+ debugf0(" HW Regs: BASE=0x%08x-%08x LIMIT= 0x%08x-%08x\n",
+ high_base, low_base, high_limit, low_limit);
+
+ pvt->dram_DstNode[dram] = (low_limit & 0x7);
+ pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7;
+
+ /*
+ * Extract address values and form a LIMIT address. Limit is the HIGHEST
+ * memory location of the region, so low 24 bits need to be all ones.
+ */
+ low_limit |= 0x0000FFFF;
+ pvt->dram_limit[dram] =
+ ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
+}