diff options
Diffstat (limited to 'drivers/edac')
-rw-r--r-- | drivers/edac/amd64_edac.c | 315 |
1 files changed, 315 insertions, 0 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 09991c8a6ee..5a6e714b115 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2455,4 +2455,319 @@ int amd64_process_error_info(struct mem_ctl_info *mci, } EXPORT_SYMBOL_GPL(amd64_process_error_info); +/* + * The main polling 'check' function, called FROM the edac core to perform the + * error checking and if an error is encountered, error processing. + */ +static void amd64_check(struct mem_ctl_info *mci) +{ + struct amd64_error_info_regs info; + + if (amd64_get_error_info(mci, &info)) + amd64_process_error_info(mci, &info, 1); +} + +/* + * Input: + * 1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer + * 2) AMD Family index value + * + * Ouput: + * Upon return of 0, the following filled in: + * + * struct pvt->addr_f1_ctl + * struct pvt->misc_f3_ctl + * + * Filled in with related device funcitions of 'dram_f2_ctl' + * These devices are "reserved" via the pci_get_device() + * + * Upon return of 1 (error status): + * + * Nothing reserved + */ +static int amd64_reserve_mc_sibling_devices(struct amd64_pvt *pvt, int mc_idx) +{ + const struct amd64_family_type *amd64_dev = &amd64_family_types[mc_idx]; + + /* Reserve the ADDRESS MAP Device */ + pvt->addr_f1_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor, + amd64_dev->addr_f1_ctl, + pvt->dram_f2_ctl); + + if (!pvt->addr_f1_ctl) { + amd64_printk(KERN_ERR, "error address map device not found: " + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_AMD, amd64_dev->addr_f1_ctl); + return 1; + } + + /* Reserve the MISC Device */ + pvt->misc_f3_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor, + amd64_dev->misc_f3_ctl, + pvt->dram_f2_ctl); + + if (!pvt->misc_f3_ctl) { + pci_dev_put(pvt->addr_f1_ctl); + pvt->addr_f1_ctl = NULL; + + amd64_printk(KERN_ERR, "error miscellaneous device not found: " + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_AMD, amd64_dev->misc_f3_ctl); + return 1; + } + + debugf1(" Addr Map device PCI Bus ID:\t%s\n", + pci_name(pvt->addr_f1_ctl)); + debugf1(" DRAM MEM-CTL PCI Bus ID:\t%s\n", + pci_name(pvt->dram_f2_ctl)); + debugf1(" Misc device PCI Bus ID:\t%s\n", + pci_name(pvt->misc_f3_ctl)); + + return 0; +} + +static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt) +{ + pci_dev_put(pvt->addr_f1_ctl); + pci_dev_put(pvt->misc_f3_ctl); +} + +/* + * Retrieve the hardware registers of the memory controller (this includes the + * 'Address Map' and 'Misc' device regs) + */ +static void amd64_read_mc_registers(struct amd64_pvt *pvt) +{ + u64 msr_val; + int dram, err = 0; + + /* + * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since + * those are Read-As-Zero + */ + rdmsrl(MSR_K8_TOP_MEM1, msr_val); + pvt->top_mem = msr_val >> 23; + debugf0(" TOP_MEM=0x%08llx\n", pvt->top_mem); + + /* check first whether TOP_MEM2 is enabled */ + rdmsrl(MSR_K8_SYSCFG, msr_val); + if (msr_val & (1U << 21)) { + rdmsrl(MSR_K8_TOP_MEM2, msr_val); + pvt->top_mem2 = msr_val >> 23; + debugf0(" TOP_MEM2=0x%08llx\n", pvt->top_mem2); + } else + debugf0(" TOP_MEM2 disabled.\n"); + + amd64_cpu_display_info(pvt); + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCAP, &pvt->nbcap); + if (err) + goto err_reg; + + if (pvt->ops->read_dram_ctl_register) + pvt->ops->read_dram_ctl_register(pvt); + + for (dram = 0; dram < DRAM_REG_COUNT; dram++) { + /* + * Call CPU specific READ function to get the DRAM Base and + * Limit values from the DCT. + */ + pvt->ops->read_dram_base_limit(pvt, dram); + + /* + * Only print out debug info on rows with both R and W Enabled. + * Normal processing, compiler should optimize this whole 'if' + * debug output block away. + */ + if (pvt->dram_rw_en[dram] != 0) { + debugf1(" DRAM_BASE[%d]: 0x%8.08x-%8.08x " + "DRAM_LIMIT: 0x%8.08x-%8.08x\n", + dram, + (u32)(pvt->dram_base[dram] >> 32), + (u32)(pvt->dram_base[dram] & 0xFFFFFFFF), + (u32)(pvt->dram_limit[dram] >> 32), + (u32)(pvt->dram_limit[dram] & 0xFFFFFFFF)); + debugf1(" IntlvEn=%s %s %s " + "IntlvSel=%d DstNode=%d\n", + pvt->dram_IntlvEn[dram] ? + "Enabled" : "Disabled", + (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W", + (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R", + pvt->dram_IntlvSel[dram], + pvt->dram_DstNode[dram]); + } + } + + amd64_read_dct_base_mask(pvt); + + err = pci_read_config_dword(pvt->addr_f1_ctl, K8_DHAR, &pvt->dhar); + if (err) + goto err_reg; + + amd64_read_dbam_reg(pvt); + + err = pci_read_config_dword(pvt->misc_f3_ctl, + F10_ONLINE_SPARE, &pvt->online_spare); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0); + if (err) + goto err_reg; + + if (!dct_ganging_enabled(pvt)) { + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, + &pvt->dclr1); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_1, + &pvt->dchr1); + if (err) + goto err_reg; + } + + amd64_dump_misc_regs(pvt); + +err_reg: + debugf0("Reading an MC register failed\n"); + +} + +/* + * NOTE: CPU Revision Dependent code + * + * Input: + * @csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1) + * k8 private pointer to --> + * DRAM Bank Address mapping register + * node_id + * DCL register where dual_channel_active is + * + * The DBAM register consists of 4 sets of 4 bits each definitions: + * + * Bits: CSROWs + * 0-3 CSROWs 0 and 1 + * 4-7 CSROWs 2 and 3 + * 8-11 CSROWs 4 and 5 + * 12-15 CSROWs 6 and 7 + * + * Values range from: 0 to 15 + * The meaning of the values depends on CPU revision and dual-channel state, + * see relevant BKDG more info. + * + * The memory controller provides for total of only 8 CSROWs in its current + * architecture. Each "pair" of CSROWs normally represents just one DIMM in + * single channel or two (2) DIMMs in dual channel mode. + * + * The following code logic collapses the various tables for CSROW based on CPU + * revision. + * + * Returns: + * The number of PAGE_SIZE pages on the specified CSROW number it + * encompasses + * + */ +static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt) +{ + u32 dram_map, nr_pages; + + /* + * The math on this doesn't look right on the surface because x/2*4 can + * be simplified to x*2 but this expression makes use of the fact that + * it is integral math where 1/2=0. This intermediate value becomes the + * number of bits to shift the DBAM register to extract the proper CSROW + * field. + */ + dram_map = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF; + + nr_pages = pvt->ops->dbam_map_to_pages(pvt, dram_map); + + /* + * If dual channel then double the memory size of single channel. + * Channel count is 1 or 2 + */ + nr_pages <<= (pvt->channel_count - 1); + + debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, dram_map); + debugf0(" nr_pages= %u channel-count = %d\n", + nr_pages, pvt->channel_count); + + return nr_pages; +} + +/* + * Initialize the array of csrow attribute instances, based on the values + * from pci config hardware registers. + */ +static int amd64_init_csrows(struct mem_ctl_info *mci) +{ + struct csrow_info *csrow; + struct amd64_pvt *pvt; + u64 input_addr_min, input_addr_max, sys_addr; + int i, err = 0, empty = 1; + + pvt = mci->pvt_info; + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &pvt->nbcfg); + if (err) + debugf0("Reading K8_NBCFG failed\n"); + + debugf0("NBCFG= 0x%x CHIPKILL= %s DRAM ECC= %s\n", pvt->nbcfg, + (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled", + (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled" + ); + + for (i = 0; i < CHIPSELECT_COUNT; i++) { + csrow = &mci->csrows[i]; + + if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) { + debugf1("----CSROW %d EMPTY for node %d\n", i, + pvt->mc_node_id); + continue; + } + + debugf1("----CSROW %d VALID for MC node %d\n", + i, pvt->mc_node_id); + + empty = 0; + csrow->nr_pages = amd64_csrow_nr_pages(i, pvt); + find_csrow_limits(mci, i, &input_addr_min, &input_addr_max); + sys_addr = input_addr_to_sys_addr(mci, input_addr_min); + csrow->first_page = (u32) (sys_addr >> PAGE_SHIFT); + sys_addr = input_addr_to_sys_addr(mci, input_addr_max); + csrow->last_page = (u32) (sys_addr >> PAGE_SHIFT); + csrow->page_mask = ~mask_from_dct_mask(pvt, i); + /* 8 bytes of resolution */ + + csrow->mtype = amd64_determine_memory_type(pvt); + + debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i); + debugf1(" input_addr_min: 0x%lx input_addr_max: 0x%lx\n", + (unsigned long)input_addr_min, + (unsigned long)input_addr_max); + debugf1(" sys_addr: 0x%lx page_mask: 0x%lx\n", + (unsigned long)sys_addr, csrow->page_mask); + debugf1(" nr_pages: %u first_page: 0x%lx " + "last_page: 0x%lx\n", + (unsigned)csrow->nr_pages, + csrow->first_page, csrow->last_page); + + /* + * determine whether CHIPKILL or JUST ECC or NO ECC is operating + */ + if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) + csrow->edac_mode = + (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? + EDAC_S4ECD4ED : EDAC_SECDED; + else + csrow->edac_mode = EDAC_NONE; + } + + return empty; +} |