1 files changed, 72 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
new file mode 100644
index 00000000000..74fac0f5c34
--- /dev/null
+++ b/drivers/gpio/Kconfig
@@ -0,0 +1,72 @@
+#
+# GPIO infrastructure and expanders
+#
+
+config HAVE_GPIO_LIB
+	bool
+	help
+	  Platforms select gpiolib if they use this infrastructure
+	  for all their GPIOs, usually starting with ones integrated
+	  into SOC processors.
+
+menu "GPIO Support"
+	depends on HAVE_GPIO_LIB
+
+config DEBUG_GPIO
+	bool "Debug GPIO calls"
+	depends on DEBUG_KERNEL
+	help
+	  Say Y here to add some extra checks and diagnostics to GPIO calls.
+	  The checks help ensure that GPIOs have been properly initialized
+	  before they are used and that sleeping calls aren not made from
+	  nonsleeping contexts.  They can make bitbanged serial protocols
+	  slower.  The diagnostics help catch the type of setup errors
+	  that are most common when setting up new platforms or boards.
+
+# put expanders in the right section, in alphabetical order
+
+comment "I2C GPIO expanders:"
+
+config GPIO_PCA9539
+	tristate "PCA9539 16-bit I/O port"
+	depends on I2C
+	help
+	  Say yes here to support the PCA9539 16-bit I/O port. These
+	  parts are made by NXP and TI.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pca9539.
+
+config GPIO_PCF857X
+	tristate "PCF857x, PCA857x, and PCA967x I2C GPIO expanders"
+	depends on I2C
+	help
+	  Say yes here to provide access to most "quasi-bidirectional" I2C
+	  GPIO expanders used for additional digital outputs or inputs.
+	  Most of these parts are from NXP, though TI is a second source for
+	  some of them.  Compatible models include:
+
+	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
+	            pca9670, pca9672, pca9674, pca9674a
+
+	  16 bits:  pcf8575, pcf8575c, pca8575,
+	            pca9671, pca9673, pca9675
+
+	  Your board setup code will need to declare the expanders in
+	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
+	  can then be used from drivers and other kernel code, just like
+	  other GPIOs, but only accessible from task contexts.
+
+	  This driver provides an in-kernel interface to those GPIOs using
+	  platform-neutral GPIO calls.
+
+comment "SPI GPIO expanders:"
+
+config GPIO_MCP23S08
+	tristate "Microchip MCP23S08 I/O expander"
+	depends on SPI_MASTER
+	help
+	  SPI driver for Microchip MCP23S08 I/O expander.  This provides
+	  a GPIO interface supporting inputs and outputs.
+
+endmenu