aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig82
-rw-r--r--drivers/hwmon/Makefile3
-rw-r--r--drivers/hwmon/abituguru.c45
-rw-r--r--drivers/hwmon/abituguru3.c1140
-rw-r--r--drivers/hwmon/coretemp.c3
-rw-r--r--drivers/hwmon/dme1737.c2080
-rw-r--r--drivers/hwmon/ds1621.c161
-rw-r--r--drivers/hwmon/f71805f.c178
-rw-r--r--drivers/hwmon/it87.c497
-rw-r--r--drivers/hwmon/lm63.c4
-rw-r--r--drivers/hwmon/lm70.c4
-rw-r--r--drivers/hwmon/lm83.c12
-rw-r--r--drivers/hwmon/lm90.c78
-rw-r--r--drivers/hwmon/lm93.c2655
-rw-r--r--drivers/hwmon/pc87360.c232
-rw-r--r--drivers/hwmon/pc87427.c2
-rw-r--r--drivers/hwmon/sis5595.c510
-rw-r--r--drivers/hwmon/smsc47b397.c7
-rw-r--r--drivers/hwmon/smsc47m1.c12
-rw-r--r--drivers/hwmon/smsc47m192.c37
-rw-r--r--drivers/hwmon/via686a.c538
-rw-r--r--drivers/hwmon/vt8231.c318
-rw-r--r--drivers/hwmon/w83627ehf.c615
-rw-r--r--drivers/hwmon/w83627hf.c153
24 files changed, 7958 insertions, 1408 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 13eea47dceb..dbdca6f10e4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -29,17 +29,34 @@ config HWMON_VID
default n
config SENSORS_ABITUGURU
- tristate "Abit uGuru"
+ tristate "Abit uGuru (rev 1 & 2)"
depends on EXPERIMENTAL
help
- If you say yes here you get support for the Abit uGuru chips
- sensor part. The voltage and frequency control parts of the Abit
- uGuru are not supported. The Abit uGuru chip can be found on Abit
- uGuru featuring motherboards (most modern Abit motherboards).
+ If you say yes here you get support for the sensor part of the first
+ and second revision of the Abit uGuru chip. The voltage and frequency
+ control parts of the Abit uGuru are not supported. The Abit uGuru
+ chip can be found on Abit uGuru featuring motherboards (most modern
+ Abit motherboards from before end 2005). For more info and a list
+ of which motherboards have which revision see
+ Documentation/hwmon/abituguru
This driver can also be built as a module. If so, the module
will be called abituguru.
+config SENSORS_ABITUGURU3
+ tristate "Abit uGuru (rev 3)"
+ depends on HWMON && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the
+ third revision of the Abit uGuru chip. Only reading the sensors
+ and their settings is supported. The third revision of the Abit
+ uGuru chip can be found on recent Abit motherboards (since end
+ 2005). For more info and a list of which motherboards have which
+ revision see Documentation/hwmon/abituguru3
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru3.
+
config SENSORS_AD7418
tristate "Analog Devices AD7416, AD7417 and AD7418"
depends on I2C && EXPERIMENTAL
@@ -250,12 +267,10 @@ config SENSORS_CORETEMP
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
- depends on I2C
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
- IT8716F and IT8718F sensor chips, and the SiS960 clone.
+ IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
@@ -365,8 +380,8 @@ config SENSORS_LM90
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
- MAX6658 sensor chips.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
+ MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
The Analog Devices ADT7461 sensor chip is also supported, but only
if found in ADM1032 compatibility mode.
@@ -384,6 +399,17 @@ config SENSORS_LM92
This driver can also be built as a module. If so, the module
will be called lm92.
+config SENSORS_LM93
+ tristate "National Semiconductor LM93 and compatibles"
+ depends on HWMON && I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM93
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm93.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
@@ -405,8 +431,6 @@ config SENSORS_MAX6650
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
- depends on I2C && EXPERIMENTAL
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get access to the hardware monitoring
@@ -433,8 +457,7 @@ config SENSORS_PC87427
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on I2C && PCI && EXPERIMENTAL
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
@@ -442,6 +465,18 @@ config SENSORS_SIS5595
This driver can also be built as a module. If so, the module
will be called sis5595.
+config SENSORS_DME1737
+ tristate "SMSC DME1737 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware monitoring
+ and fan control features of the SMSC DME1737 (and compatibles
+ like the Asus A8000) Super-I/O chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called dme1737.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
help
@@ -487,8 +522,7 @@ config SENSORS_SMSC47B397
config SENSORS_VIA686A
tristate "VIA686A"
- depends on I2C && PCI
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
@@ -509,9 +543,8 @@ config SENSORS_VT1211
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI
select HWMON_VID
- select I2C_ISA
help
If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.
@@ -584,17 +617,16 @@ config SENSORS_W83627HF
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF"
- depends on I2C && EXPERIMENTAL
- select I2C_ISA
+ tristate "Winbond W83627EHF/DHG"
+ select HWMON_VID
help
- If you say yes here you get preliminary support for the hardware
+ If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
- Only fan and temperature inputs are supported at the moment, while
- the chip does much more than that.
This driver also supports the W83627EHG, which is the lead-free
- version of the W83627EHF.
+ version of the W83627EHF, and the W83627DHG, which is a similar
+ chip suited for specific Intel processors that use PECI such as
+ the Core 2 Duo.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index cfaf338919d..59f81fae40a 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o
+obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
@@ -25,6 +26,7 @@ obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
+obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
@@ -45,6 +47,7 @@ obj-$(CONFIG_SENSORS_LM85) += lm85.o
obj-$(CONFIG_SENSORS_LM87) += lm87.o
obj-$(CONFIG_SENSORS_LM90) += lm90.o
obj-$(CONFIG_SENSORS_LM92) += lm92.o
+obj-$(CONFIG_SENSORS_LM93) += lm93.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index bede4d990ea..d575ee958de 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -16,9 +16,9 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
- This driver supports the sensor part of the custom Abit uGuru chip found
- on Abit uGuru motherboards. Note: because of lack of specs the CPU / RAM /
- etc voltage & frequency control is not supported!
+ This driver supports the sensor part of the first and second revision of
+ the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because
+ of lack of specs the CPU/RAM voltage & frequency control is not supported!
*/
#include <linux/module.h>
#include <linux/sched.h>
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/dmi.h>
#include <asm/io.h>
/* Banks */
@@ -418,7 +419,7 @@ static int __devinit
abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
u8 sensor_addr)
{
- u8 val, buf[3];
+ u8 val, test_flag, buf[3];
int i, ret = -ENODEV; /* error is the most common used retval :| */
/* If overriden by the user return the user selected type */
@@ -436,7 +437,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
return -ENODEV;
/* Test val is sane / usable for sensor type detection. */
- if ((val < 10u) || (val > 240u)) {
+ if ((val < 10u) || (val > 250u)) {
printk(KERN_WARNING ABIT_UGURU_NAME
": bank1-sensor: %d reading (%d) too close to limits, "
"unable to determine sensor type, skipping sensor\n",
@@ -449,10 +450,20 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr);
/* Volt sensor test, enable volt low alarm, set min value ridicously
- high. If its a volt sensor this should always give us an alarm. */
- buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE;
- buf[1] = 245;
- buf[2] = 250;
+ high, or vica versa if the reading is very high. If its a volt
+ sensor this should always give us an alarm. */
+ if (val <= 240u) {
+ buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE;
+ buf[1] = 245;
+ buf[2] = 250;
+ test_flag = ABIT_UGURU_VOLT_LOW_ALARM_FLAG;
+ } else {
+ buf[0] = ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE;
+ buf[1] = 5;
+ buf[2] = 10;
+ test_flag = ABIT_UGURU_VOLT_HIGH_ALARM_FLAG;
+ }
+
if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
buf, 3) != 3)
goto abituguru_detect_bank1_sensor_type_exit;
@@ -469,13 +480,13 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
sensor_addr, buf, 3,
ABIT_UGURU_MAX_RETRIES) != 3)
goto abituguru_detect_bank1_sensor_type_exit;
- if (buf[0] & ABIT_UGURU_VOLT_LOW_ALARM_FLAG) {
+ if (buf[0] & test_flag) {
ABIT_UGURU_DEBUG(2, " found volt sensor\n");
ret = ABIT_UGURU_IN_SENSOR;
goto abituguru_detect_bank1_sensor_type_exit;
} else
ABIT_UGURU_DEBUG(2, " alarm raised during volt "
- "sensor test, but volt low flag not set\n");
+ "sensor test, but volt range flag not set\n");
} else
ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor "
"test\n");
@@ -1287,6 +1298,7 @@ abituguru_probe_error:
for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++)
device_remove_file(&pdev->dev,
&abituguru_sysfs_attr[i].dev_attr);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return res;
}
@@ -1296,13 +1308,13 @@ static int __devexit abituguru_remove(struct platform_device *pdev)
int i;
struct abituguru_data *data = platform_get_drvdata(pdev);
- platform_set_drvdata(pdev, NULL);
hwmon_device_unregister(data->class_dev);
for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++)
device_remove_file(&pdev->dev,
&abituguru_sysfs_attr[i].dev_attr);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
@@ -1436,6 +1448,15 @@ static int __init abituguru_init(void)
int address, err;
struct resource res = { .flags = IORESOURCE_IO };
+#ifdef CONFIG_DMI
+ char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+
+ /* safety check, refuse to load on non Abit motherboards */
+ if (!force && (!board_vendor ||
+ strcmp(board_vendor, "http://www.abit.com.tw/")))
+ return -ENODEV;
+#endif
+
address = abituguru_detect();
if (address < 0)
return address;
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
new file mode 100644
index 00000000000..a003d104ca4
--- /dev/null
+++ b/drivers/hwmon/abituguru3.c
@@ -0,0 +1,1140 @@
+/*
+ abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+/*
+ This driver supports the sensor part of revision 3 of the custom Abit uGuru
+ chip found on newer Abit uGuru motherboards. Note: because of lack of specs
+ only reading the sensors and their settings is supported.
+*/
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <asm/io.h>
+
+/* uGuru3 bank addresses */
+#define ABIT_UGURU3_SETTINGS_BANK 0x01
+#define ABIT_UGURU3_SENSORS_BANK 0x08
+#define ABIT_UGURU3_MISC_BANK 0x09
+#define ABIT_UGURU3_ALARMS_START 0x1E
+#define ABIT_UGURU3_SETTINGS_START 0x24
+#define ABIT_UGURU3_VALUES_START 0x80
+#define ABIT_UGURU3_BOARD_ID 0x0A
+/* uGuru3 sensor bank flags */ /* Alarm if: */
+#define ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE 0x01 /* temp over warn */
+#define ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE 0x02 /* volt over max */
+#define ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE 0x04 /* volt under min */
+#define ABIT_UGURU3_TEMP_HIGH_ALARM_FLAG 0x10 /* temp is over warn */
+#define ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG 0x20 /* volt is over max */
+#define ABIT_UGURU3_VOLT_LOW_ALARM_FLAG 0x40 /* volt is under min */
+#define ABIT_UGURU3_FAN_LOW_ALARM_ENABLE 0x01 /* fan under min */
+#define ABIT_UGURU3_BEEP_ENABLE 0x08 /* beep if alarm */
+#define ABIT_UGURU3_SHUTDOWN_ENABLE 0x80 /* shutdown if alarm */
+/* sensor types */
+#define ABIT_UGURU3_IN_SENSOR 0
+#define ABIT_UGURU3_TEMP_SENSOR 1
+#define ABIT_UGURU3_FAN_SENSOR 2
+
+/* Timeouts / Retries, if these turn out to need a lot of fiddling we could
+ convert them to params. Determined by trial and error. I assume this is
+ cpu-speed independent, since the ISA-bus and not the CPU should be the
+ bottleneck. */
+#define ABIT_UGURU3_WAIT_TIMEOUT 250
+/* Normally the 0xAC at the end of synchronize() is reported after the
+ first read, but sometimes not and we need to poll */
+#define ABIT_UGURU3_SYNCHRONIZE_TIMEOUT 5
+/* utility macros */
+#define ABIT_UGURU3_NAME "abituguru3"
+#define ABIT_UGURU3_DEBUG(format, arg...) \
+ if (verbose) \
+ printk(KERN_DEBUG ABIT_UGURU3_NAME ": " format , ## arg)
+
+/* Macros to help calculate the sysfs_names array length */
+#define ABIT_UGURU3_MAX_NO_SENSORS 26
+/* sum of strlen +1 of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0,
+ in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0, in??_label\0 */
+#define ABIT_UGURU3_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14 + 11)
+/* sum of strlen +1 of: temp??_input\0, temp??_max\0, temp??_crit\0,
+ temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0,
+ temp??_label\0 */
+#define ABIT_UGURU3_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16 + 13)
+/* sum of strlen +1 of: fan??_input\0, fan??_min\0, fan??_alarm\0,
+ fan??_alarm_enable\0, fan??_beep\0, fan??_shutdown\0, fan??_label\0 */
+#define ABIT_UGURU3_FAN_NAMES_LENGTH (12 + 10 + 12 + 19 + 11 + 15 + 12)
+/* Worst case scenario 16 in sensors (longest names_length) and the rest
+ temp sensors (second longest names_length). */
+#define ABIT_UGURU3_SYSFS_NAMES_LENGTH (16 * ABIT_UGURU3_IN_NAMES_LENGTH + \
+ (ABIT_UGURU3_MAX_NO_SENSORS - 16) * ABIT_UGURU3_TEMP_NAMES_LENGTH)
+
+/* All the macros below are named identical to the openguru2 program
+ reverse engineered by Louis Kruger, hence the names might not be 100%
+ logical. I could come up with better names, but I prefer keeping the names
+ identical so that this driver can be compared with his work more easily. */
+/* Two i/o-ports are used by uGuru */
+#define ABIT_UGURU3_BASE 0x00E0
+#define ABIT_UGURU3_CMD 0x00
+#define ABIT_UGURU3_DATA 0x04
+#define ABIT_UGURU3_REGION_LENGTH 5
+/* The wait_xxx functions return this on success and the last contents
+ of the DATA register (0-255) on failure. */
+#define ABIT_UGURU3_SUCCESS -1
+/* uGuru status flags */
+#define ABIT_UGURU3_STATUS_READY_FOR_READ 0x01
+#define ABIT_UGURU3_STATUS_BUSY 0x02
+
+
+/* Structures */
+struct abituguru3_sensor_info {
+ const char* name;
+ int port;
+ int type;
+ int multiplier;
+ int divisor;
+ int offset;
+};
+
+struct abituguru3_motherboard_info {
+ u16 id;
+ const char *name;
+ /* + 1 -> end of sensors indicated by a sensor with name == NULL */
+ struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
+};
+
+/* For the Abit uGuru, we need to keep some data in memory.
+ The structure is dynamically allocated, at the same time when a new
+ abituguru3 device is allocated. */
+struct abituguru3_data {
+ struct class_device *class_dev; /* hwmon registered device */
+ struct mutex update_lock; /* protect access to data and uGuru */
+ unsigned short addr; /* uguru base address */
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ /* For convenience the sysfs attr and their names are generated
+ automatically. We have max 10 entries per sensor (for in sensors) */
+ struct sensor_device_attribute_2 sysfs_attr[ABIT_UGURU3_MAX_NO_SENSORS
+ * 10];
+
+ /* Buffer to store the dynamically generated sysfs names */
+ char sysfs_names[ABIT_UGURU3_SYSFS_NAMES_LENGTH];
+
+ /* Pointer to the sensors info for the detected motherboard */
+ const struct abituguru3_sensor_info *sensors;
+
+ /* The abituguru3 supports upto 48 sensors, and thus has registers
+ sets for 48 sensors, for convienence reasons / simplicity of the
+ code we always read and store all registers for all 48 sensors */
+
+ /* Alarms for all 48 sensors (1 bit per sensor) */
+ u8 alarms[48/8];
+
+ /* Value of all 48 sensors */
+ u8 value[48];
+
+ /* Settings of all 48 sensors, note in and temp sensors (the first 32
+ sensors) have 3 bytes of settings, while fans only have 2 bytes,
+ for convenience we use 3 bytes for all sensors */
+ u8 settings[48][3];
+};
+
+
+/* Constants */
+static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
+ { 0x000C, "unknown", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 10, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
+ { "MCH 2.5V", 5, 0, 20, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM", 26, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS FAN", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 35, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x000D, "Abit AW8", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 10, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
+ { "MCH 2.5V", 5, 0, 20, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM1", 26, 1, 1, 1, 0 },
+ { "PWM2", 27, 1, 1, 1, 0 },
+ { "PWM3", 28, 1, 1, 1, 0 },
+ { "PWM4", 29, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 35, 2, 60, 1, 0 },
+ { "AUX2 Fan", 36, 2, 60, 1, 0 },
+ { "AUX3 Fan", 37, 2, 60, 1, 0 },
+ { "AUX4 Fan", 38, 2, 60, 1, 0 },
+ { "AUX5 Fan", 39, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x000E, "AL-8", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 10, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
+ { "MCH 2.5V", 5, 0, 20, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM", 26, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x000F, "unknown", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 10, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
+ { "MCH 2.5V", 5, 0, 20, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM", 26, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0010, "Abit NI8 SLI GR", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 10, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "NB 1.4V", 4, 0, 10, 1, 0 },
+ { "SB 1.5V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "SYS", 25, 1, 1, 1, 0 },
+ { "PWM", 26, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 35, 2, 60, 1, 0 },
+ { "OTES1 Fan", 36, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0011, "Abit AT8 32X", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 20, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 },
+ { "NB 1.8V", 4, 0, 10, 1, 0 },
+ { "NB 1.8V Dual", 5, 0, 10, 1, 0 },
+ { "HTV 1.2", 3, 0, 10, 1, 0 },
+ { "PCIE 1.2V", 12, 0, 10, 1, 0 },
+ { "NB 1.2V", 13, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "NB", 25, 1, 1, 1, 0 },
+ { "System", 26, 1, 1, 1, 0 },
+ { "PWM", 27, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 35, 2, 60, 1, 0 },
+ { "AUX2 Fan", 36, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0012, "Abit AN8 32X", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 20, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "HyperTransport", 3, 0, 10, 1, 0 },
+ { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 },
+ { "NB", 4, 0, 10, 1, 0 },
+ { "SB", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "SYS", 25, 1, 1, 1, 0 },
+ { "PWM", 26, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 36, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0013, "unknown", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 10, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
+ { "MCH 2.5V", 5, 0, 20, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM1", 26, 1, 1, 1, 0 },
+ { "PWM2", 27, 1, 1, 1, 0 },
+ { "PWM3", 28, 1, 1, 1, 0 },
+ { "PWM4", 29, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 35, 2, 60, 1, 0 },
+ { "AUX2 Fan", 36, 2, 60, 1, 0 },
+ { "AUX3 Fan", 37, 2, 60, 1, 0 },
+ { "AUX4 Fan", 38, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0014, "Abit AB9 Pro", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 10, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
+ { "MCH 2.5V", 5, 0, 20, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM", 26, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0015, "unknown", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR", 1, 0, 20, 1, 0 },
+ { "DDR VTT", 2, 0, 10, 1, 0 },
+ { "HyperTransport", 3, 0, 10, 1, 0 },
+ { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 },
+ { "NB", 4, 0, 10, 1, 0 },
+ { "SB", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "SYS", 25, 1, 1, 1, 0 },
+ { "PWM", 26, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 33, 2, 60, 1, 0 },
+ { "AUX2 Fan", 35, 2, 60, 1, 0 },
+ { "AUX3 Fan", 36, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0016, "AW9D-MAX", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR2", 1, 0, 20, 1, 0 },
+ { "DDR2 VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
+ { "MCH 2.5V", 5, 0, 20, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM1", 26, 1, 1, 1, 0 },
+ { "PWM2", 27, 1, 1, 1, 0 },
+ { "PWM3", 28, 1, 1, 1, 0 },
+ { "PWM4", 29, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "NB Fan", 33, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 35, 2, 60, 1, 0 },
+ { "AUX2 Fan", 36, 2, 60, 1, 0 },
+ { "AUX3 Fan", 37, 2, 60, 1, 0 },
+ { "OTES1 Fan", 38, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0017, "unknown", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR2", 1, 0, 20, 1, 0 },
+ { "DDR2 VTT", 2, 0, 10, 1, 0 },
+ { "HyperTransport", 3, 0, 10, 1, 0 },
+ { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 },
+ { "NB 1.8V", 4, 0, 10, 1, 0 },
+ { "NB 1.2V ", 13, 0, 10, 1, 0 },
+ { "SB 1.2V", 5, 0, 10, 1, 0 },
+ { "PCIE 1.2V", 12, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "ATX +3.3V", 10, 0, 20, 1, 0 },
+ { "ATX 5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 26, 1, 1, 1, 0 },
+ { "PWM", 27, 1, 1, 1, 0 },
+ { "CPU FAN", 32, 2, 60, 1, 0 },
+ { "SYS FAN", 34, 2, 60, 1, 0 },
+ { "AUX1 FAN", 35, 2, 60, 1, 0 },
+ { "AUX2 FAN", 36, 2, 60, 1, 0 },
+ { "AUX3 FAN", 37, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0018, "unknown", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR2", 1, 0, 20, 1, 0 },
+ { "DDR2 VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT", 3, 0, 10, 1, 0 },
+ { "MCH 1.25V", 4, 0, 10, 1, 0 },
+ { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM Phase1", 26, 1, 1, 1, 0 },
+ { "PWM Phase2", 27, 1, 1, 1, 0 },
+ { "PWM Phase3", 28, 1, 1, 1, 0 },
+ { "PWM Phase4", 29, 1, 1, 1, 0 },
+ { "PWM Phase5", 30, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 33, 2, 60, 1, 0 },
+ { "AUX2 Fan", 35, 2, 60, 1, 0 },
+ { "AUX3 Fan", 36, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0019, "unknown", {
+ { "CPU Core", 7, 0, 10, 1, 0 },
+ { "DDR2", 13, 0, 20, 1, 0 },
+ { "DDR2 VTT", 14, 0, 10, 1, 0 },
+ { "CPU VTT", 3, 0, 20, 1, 0 },
+ { "NB 1.2V ", 4, 0, 10, 1, 0 },
+ { "SB 1.5V", 6, 0, 10, 1, 0 },
+ { "HyperTransport", 5, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 12, 0, 60, 1, 0 },
+ { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "ATX +3.3V", 10, 0, 20, 1, 0 },
+ { "ATX 5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM Phase1", 26, 1, 1, 1, 0 },
+ { "PWM Phase2", 27, 1, 1, 1, 0 },
+ { "PWM Phase3", 28, 1, 1, 1, 0 },
+ { "PWM Phase4", 29, 1, 1, 1, 0 },
+ { "PWM Phase5", 30, 1, 1, 1, 0 },
+ { "CPU FAN", 32, 2, 60, 1, 0 },
+ { "SYS FAN", 34, 2, 60, 1, 0 },
+ { "AUX1 FAN", 33, 2, 60, 1, 0 },
+ { "AUX2 FAN", 35, 2, 60, 1, 0 },
+ { "AUX3 FAN", 36, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x001A, "unknown", {
+ { "CPU Core", 0, 0, 10, 1, 0 },
+ { "DDR2", 1, 0, 20, 1, 0 },
+ { "DDR2 VTT", 2, 0, 10, 1, 0 },
+ { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
+ { "MCH 1.25V", 4, 0, 10, 1, 0 },
+ { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
+ { "ICH 1.05V", 6, 0, 10, 1, 0 },
+ { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
+ { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 },
+ { "ATX +5V", 9, 0, 30, 1, 0 },
+ { "+3.3V", 10, 0, 20, 1, 0 },
+ { "5VSB", 11, 0, 30, 1, 0 },
+ { "CPU", 24, 1, 1, 1, 0 },
+ { "System ", 25, 1, 1, 1, 0 },
+ { "PWM ", 26, 1, 1, 1, 0 },
+ { "PWM Phase2", 27, 1, 1, 1, 0 },
+ { "PWM Phase3", 28, 1, 1, 1, 0 },
+ { "PWM Phase4", 29, 1, 1, 1, 0 },
+ { "PWM Phase5", 30, 1, 1, 1, 0 },
+ { "CPU Fan", 32, 2, 60, 1, 0 },
+ { "SYS Fan", 34, 2, 60, 1, 0 },
+ { "AUX1 Fan", 33, 2, 60, 1, 0 },
+ { "AUX2 Fan", 35, 2, 60, 1, 0 },
+ { "AUX3 Fan", 36, 2, 60, 1, 0 },
+ { NULL, 0, 0, 0, 0, 0 } }
+ },
+ { 0x0000, NULL, { { NULL, 0, 0, 0, 0, 0 } } }
+};
+
+
+/* Insmod parameters */
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Set to one to force detection.");
+/* Default verbose is 1, since this driver is still in the testing phase */
+static int verbose = 1;
+module_param(verbose, bool, 0644);
+MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
+
+
+/* wait while the uguru is busy (usually after a write) */
+static int abituguru3_wait_while_busy(struct abituguru3_data *data)
+{
+ u8 x;
+ int timeout = ABIT_UGURU3_WAIT_TIMEOUT;
+
+ while ((x = inb_p(data->addr + ABIT_UGURU3_DATA)) &
+ ABIT_UGURU3_STATUS_BUSY) {
+ timeout--;
+ if (timeout == 0)
+ return x;
+ /* sleep a bit before our last try, to give the uGuru3 one
+ last chance to respond. */
+ if (timeout == 1)
+ msleep(1);
+ }
+ return ABIT_UGURU3_SUCCESS;
+}
+
+/* wait till uguru is ready to be read */
+static int abituguru3_wait_for_read(struct abituguru3_data *data)
+{
+ u8 x;
+ int timeout = ABIT_UGURU3_WAIT_TIMEOUT;
+
+ while (!((x = inb_p(data->addr + ABIT_UGURU3_DATA)) &
+ ABIT_UGURU3_STATUS_READY_FOR_READ)) {
+ timeout--;
+ if (timeout == 0)
+ return x;
+ /* sleep a bit before our last try, to give the uGuru3 one
+ last chance to respond. */
+ if (timeout == 1)
+ msleep(1);
+ }
+ return ABIT_UGURU3_SUCCESS;
+}
+
+/* This synchronizes us with the uGuru3's protocol state machine, this
+ must be done before each command. */
+static int abituguru3_synchronize(struct abituguru3_data *data)
+{
+ int x, timeout = ABIT_UGURU3_SYNCHRONIZE_TIMEOUT;
+
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("synchronize timeout during initial busy "
+ "wait, status: 0x%02x\n", x);
+ return -EIO;
+ }
+
+ outb(0x20, data->addr + ABIT_UGURU3_DATA);
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x20, "
+ "status: 0x%02x\n", x);
+ return -EIO;
+ }
+
+ outb(0x10, data->addr + ABIT_UGURU3_CMD);
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x10, "
+ "status: 0x%02x\n", x);
+ return -EIO;
+ }
+
+ outb(0x00, data->addr + ABIT_UGURU3_CMD);
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x00, "
+ "status: 0x%02x\n", x);
+ return -EIO;
+ }
+
+ if ((x = abituguru3_wait_for_read(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("synchronize timeout waiting for read, "
+ "status: 0x%02x\n", x);
+ return -EIO;
+ }
+
+ while ((x = inb(data->addr + ABIT_UGURU3_CMD)) != 0xAC) {
+ timeout--;
+ if (timeout == 0) {
+ ABIT_UGURU3_DEBUG("synchronize timeout cmd does not "
+ "hold 0xAC after synchronize, cmd: 0x%02x\n",
+ x);
+ return -EIO;
+ }
+ msleep(1);
+ }
+ return 0;
+}
+
+/* Read count bytes from sensor sensor_addr in bank bank_addr and store the
+ result in buf */
+static int abituguru3_read(struct abituguru3_data *data, u8 bank, u8 offset,
+ u8 count, u8 *buf)
+{
+ int i, x;
+
+ if ((x = abituguru3_synchronize(data)))
+ return x;
+
+ outb(0x1A, data->addr + ABIT_UGURU3_DATA);
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
+ "sending 0x1A, status: 0x%02x\n", (unsigned int)bank,
+ (unsigned int)offset, x);
+ return -EIO;
+ }
+
+ outb(bank, data->addr + ABIT_UGURU3_CMD);
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
+ "sending the bank, status: 0x%02x\n",
+ (unsigned int)bank, (unsigned int)offset, x);
+ return -EIO;
+ }
+
+ outb(offset, data->addr + ABIT_UGURU3_CMD);
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
+ "sending the offset, status: 0x%02x\n",
+ (unsigned int)bank, (unsigned int)offset, x);
+ return -EIO;
+ }
+
+ outb(count, data->addr + ABIT_UGURU3_CMD);
+ if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
+ "sending the count, status: 0x%02x\n",
+ (unsigned int)bank, (unsigned int)offset, x);
+ return -EIO;
+ }
+
+ for (i = 0; i < count; i++) {
+ if ((x = abituguru3_wait_for_read(data)) !=
+ ABIT_UGURU3_SUCCESS) {
+ ABIT_UGURU3_DEBUG("timeout reading byte %d from "
+ "0x%02x:0x%02x, status: 0x%02x\n", i,
+ (unsigned int)bank, (unsigned int)offset, x);
+ break;
+ }
+ buf[i] = inb(data->addr + ABIT_UGURU3_CMD);
+ }
+ return i;
+}
+
+/* Sensor settings are stored 1 byte per offset with the bytes
+ placed add consecutive offsets. */
+int abituguru3_read_increment_offset(struct abituguru3_data *data, u8 bank,
+ u8 offset, u8 count, u8 *buf, int offset_count)
+{
+ int i, x;
+
+ for (i = 0; i < offset_count; i++)
+ if ((x = abituguru3_read(data, bank, offset + i, count,
+ buf + i * count)) != count)
+ return i * count + (i && (x < 0)) ? 0 : x;
+
+ return i * count;
+}
+
+/* Following are the sysfs callback functions. These functions expect:
+ sensor_device_attribute_2->index: index into the data->sensors array
+ sensor_device_attribute_2->nr: register offset, bitmask or NA. */
+static struct abituguru3_data *abituguru3_update_device(struct device *dev);
+
+static ssize_t show_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int value;
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ struct abituguru3_data *data = abituguru3_update_device(dev);
+ const struct abituguru3_sensor_info *sensor;
+
+ if (!data)
+ return -EIO;
+
+ sensor = &data->sensors[attr->index];
+
+ /* are we reading a setting, or is this a normal read? */
+ if (attr->nr)
+ value = data->settings[sensor->port][attr->nr];
+ else
+ value = data->value[sensor->port];
+
+ /* convert the value */
+ value = (value * sensor->multiplier) / sensor->divisor +
+ sensor->offset;
+
+ /* alternatively we could update the sensors settings struct for this,
+ but then its contents would differ from the windows sw ini files */
+ if (sensor->type == ABIT_UGURU3_TEMP_SENSOR)
+ value *= 1000;
+
+ return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int port;
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ struct abituguru3_data *data = abituguru3_update_device(dev);
+
+ if (!data)
+ return -EIO;
+
+ port = data->sensors[attr->index].port;
+
+ /* See if the alarm bit for this sensor is set and if a bitmask is
+ given in attr->nr also check if the alarm matches the type of alarm
+ we're looking for (for volt it can be either low or high). The type
+ is stored in a few readonly bits in the settings of the sensor. */
+ if ((data->alarms[port / 8] & (0x01 << (port % 8))) &&
+ (!attr->nr || (data->settings[port][0] & attr->nr)))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_mask(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ struct abituguru3_data *data = dev_get_drvdata(dev);
+
+ if (data->settings[data->sensors[attr->index].port][0] & attr->nr)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ struct abituguru3_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->sensors[attr->index].name);
+}
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n", ABIT_UGURU3_NAME);
+}
+
+/* Sysfs attr templates, the real entries are generated automatically. */
+static const
+struct sensor_device_attribute_2 abituguru3_sysfs_templ[3][10] = { {
+ SENSOR_ATTR_2(in%d_input, 0444, show_value, NULL, 0, 0),
+ SENSOR_ATTR_2(in%d_min, 0444, show_value, NULL, 1, 0),
+ SENSOR_ATTR_2(in%d_max, 0444, show_value, NULL, 2, 0),
+ SENSOR_ATTR_2(in%d_min_alarm, 0444, show_alarm, NULL,
+ ABIT_UGURU3_VOLT_LOW_ALARM_FLAG, 0),
+ SENSOR_ATTR_2(in%d_max_alarm, 0444, show_alarm, NULL,
+ ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG, 0),
+ SENSOR_ATTR_2(in%d_beep, 0444, show_mask, NULL,
+ ABIT_UGURU3_BEEP_ENABLE, 0),
+ SENSOR_ATTR_2(in%d_shutdown, 0444, show_mask, NULL,
+ ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
+ SENSOR_ATTR_2(in%d_min_alarm_enable, 0444, show_mask, NULL,
+ ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE, 0),
+ SENSOR_ATTR_2(in%d_max_alarm_enable, 0444, show_mask, NULL,
+ ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE, 0),
+ SENSOR_ATTR_2(in%d_label, 0444, show_label, NULL, 0, 0)
+ }, {
+ SENSOR_ATTR_2(temp%d_input, 0444, show_value, NULL, 0, 0),
+ SENSOR_ATTR_2(temp%d_max, 0444, show_value, NULL, 1, 0),
+ SENSOR_ATTR_2(temp%d_crit, 0444, show_value, NULL, 2, 0),
+ SENSOR_ATTR_2(temp%d_alarm, 0444, show_alarm, NULL, 0, 0),
+ SENSOR_ATTR_2(temp%d_beep, 0444, show_mask, NULL,
+ ABIT_UGURU3_BEEP_ENABLE, 0),
+ SENSOR_ATTR_2(temp%d_shutdown, 0444, show_mask, NULL,
+ ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
+ SENSOR_ATTR_2(temp%d_alarm_enable, 0444, show_mask, NULL,
+ ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE, 0),
+ SENSOR_ATTR_2(temp%d_label, 0444, show_label, NULL, 0, 0)
+ }, {
+ SENSOR_ATTR_2(fan%d_input, 0444, show_value, NULL, 0, 0),
+ SENSOR_ATTR_2(fan%d_min, 0444, show_value, NULL, 1, 0),
+ SENSOR_ATTR_2(fan%d_alarm, 0444, show_alarm, NULL, 0, 0),
+ SENSOR_ATTR_2(fan%d_beep, 0444, show_mask, NULL,
+ ABIT_UGURU3_BEEP_ENABLE, 0),
+ SENSOR_ATTR_2(fan%d_shutdown, 0444, show_mask, NULL,
+ ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
+ SENSOR_ATTR_2(fan%d_alarm_enable, 0444, show_mask, NULL,
+ ABIT_UGURU3_FAN_LOW_ALARM_ENABLE, 0),
+ SENSOR_ATTR_2(fan%d_label, 0444, show_label, NULL, 0, 0)
+} };
+
+static struct sensor_device_attribute_2 abituguru3_sysfs_attr[] = {
+ SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0),
+};
+
+static int __devinit abituguru3_probe(struct platform_device *pdev)
+{
+ const int no_sysfs_attr[3] = { 10, 8, 7 };
+ int sensor_index[3] = { 0, 1, 1 };
+ struct abituguru3_data *data;
+ int i, j, type, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV;
+ char *sysfs_filename;
+ u8 buf[2];
+ u16 id;
+
+ if (!(data = kzalloc(sizeof(struct abituguru3_data), GFP_KERNEL)))
+ return -ENOMEM;
+
+ data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
+ mutex_init(&data->update_lock);
+ platform_set_drvdata(pdev, data);
+
+ /* Read the motherboard ID */
+ if ((i = abituguru3_read(data, ABIT_UGURU3_MISC_BANK,
+ ABIT_UGURU3_BOARD_ID, 2, buf)) != 2) {
+ goto abituguru3_probe_error;
+ }
+
+ /* Completely read the uGuru to see if one really is there */
+ if (!abituguru3_update_device(&pdev->dev))
+ goto abituguru3_probe_error;
+
+ /* lookup the ID in our motherboard table */
+ id = ((u16)buf[0] << 8) | (u16)buf[1];
+ for (i = 0; abituguru3_motherboards[i].id; i++)
+ if (abituguru3_motherboards[i].id == id)
+ break;
+ if (!abituguru3_motherboards[i].id) {
+ printk(KERN_ERR ABIT_UGURU3_NAME ": error unknown motherboard "
+ "ID: %04X. Please report this to the abituguru3 "
+ "maintainer (see MAINTAINERS)\n", (unsigned int)id);
+ goto abituguru3_probe_error;
+ }
+ data->sensors = abituguru3_motherboards[i].sensors;
+ printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
+ "ID: %04X (%s)\n", (unsigned int)id,
+ abituguru3_motherboards[i].name);
+
+ /* Fill the sysfs attr array */
+ sysfs_attr_i = 0;
+ sysfs_filename = data->sysfs_names;
+ sysfs_names_free = ABIT_UGURU3_SYSFS_NAMES_LENGTH;
+ for (i = 0; data->sensors[i].name; i++) {
+ /* Fail safe check, this should never happen! */
+ if (i >= ABIT_UGURU3_MAX_NO_SENSORS) {
+ printk(KERN_ERR ABIT_UGURU3_NAME
+ ": Fatal error motherboard has more sensors "
+ "then ABIT_UGURU3_MAX_NO_SENSORS. This should "
+ "never happen please report to the abituguru3 "
+ "maintainer (see MAINTAINERS)\n");
+ res = -ENAMETOOLONG;
+ goto abituguru3_probe_error;
+ }
+ type = data->sensors[i].type;
+ for (j = 0; j < no_sysfs_attr[type]; j++) {
+ used = snprintf(sysfs_filename, sysfs_names_free,
+ abituguru3_sysfs_templ[type][j].dev_attr.attr.
+ name, sensor_index[type]) + 1;
+ data->sysfs_attr[sysfs_attr_i] =
+ abituguru3_sysfs_templ[type][j];
+ data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name =
+ sysfs_filename;
+ data->sysfs_attr[sysfs_attr_i].index = i;
+ sysfs_filename += used;
+ sysfs_names_free -= used;
+ sysfs_attr_i++;
+ }
+ sensor_index[type]++;
+ }
+ /* Fail safe check, this should never happen! */
+ if (sysfs_names_free < 0) {
+ printk(KERN_ERR ABIT_UGURU3_NAME
+ ": Fatal error ran out of space for sysfs attr names. "
+ "This should never happen please report to the "
+ "abituguru3 maintainer (see MAINTAINERS)\n");
+ res = -ENAMETOOLONG;
+ goto abituguru3_probe_error;
+ }
+
+ /* Register sysfs hooks */
+ for (i = 0; i < sysfs_attr_i; i++)
+ if (device_create_file(&pdev->dev,
+ &data->sysfs_attr[i].dev_attr))
+ goto abituguru3_probe_error;
+ for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
+ if (device_create_file(&pdev->dev,
+ &abituguru3_sysfs_attr[i].dev_attr))
+ goto abituguru3_probe_error;
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ res = PTR_ERR(data->class_dev);
+ goto abituguru3_probe_error;
+ }
+
+ return 0; /* success */
+
+abituguru3_probe_error:
+ for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
+ device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
+ device_remove_file(&pdev->dev,
+ &abituguru3_sysfs_attr[i].dev_attr);
+ kfree(data);
+ return res;
+}
+
+static int __devexit abituguru3_remove(struct platform_device *pdev)
+{
+ int i;
+ struct abituguru3_data *data = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ hwmon_device_unregister(data->class_dev);
+ for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
+ device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
+ device_remove_file(&pdev->dev,
+ &abituguru3_sysfs_attr[i].dev_attr);
+ kfree(data);
+
+ return 0;
+}
+
+static struct abituguru3_data *abituguru3_update_device(struct device *dev)
+{
+ int i;
+ struct abituguru3_data *data = dev_get_drvdata(dev);
+
+ mutex_lock(&data->update_lock);
+ if (!data->valid || time_after(jiffies, data->last_updated + HZ)) {
+ /* Clear data->valid while updating */
+ data->valid = 0;
+ /* Read alarms */
+ if (abituguru3_read_increment_offset(data,
+ ABIT_UGURU3_SETTINGS_BANK,
+ ABIT_UGURU3_ALARMS_START,
+ 1, data->alarms, 48/8) != (48/8))
+ goto LEAVE_UPDATE;
+ /* Read in and temp sensors (3 byte settings / sensor) */
+ for (i = 0; i < 32; i++) {
+ if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK,
+ ABIT_UGURU3_VALUES_START + i,
+ 1, &data->value[i]) != 1)
+ goto LEAVE_UPDATE;
+ if (abituguru3_read_increment_offset(data,
+ ABIT_UGURU3_SETTINGS_BANK,
+ ABIT_UGURU3_SETTINGS_START + i * 3,
+ 1,
+ data->settings[i], 3) != 3)
+ goto LEAVE_UPDATE;
+ }
+ /* Read temp sensors (2 byte settings / sensor) */
+ for (i = 0; i < 16; i++) {
+ if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK,
+ ABIT_UGURU3_VALUES_START + 32 + i,
+ 1, &data->value[32 + i]) != 1)
+ goto LEAVE_UPDATE;
+ if (abituguru3_read_increment_offset(data,
+ ABIT_UGURU3_SETTINGS_BANK,
+ ABIT_UGURU3_SETTINGS_START + 32 * 3 +
+ i * 2, 1,
+ data->settings[32 + i], 2) != 2)
+ goto LEAVE_UPDATE;
+ }
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+LEAVE_UPDATE:
+ mutex_unlock(&data->update_lock);
+ if (data->valid)
+ return data;
+ else
+ return NULL;
+}
+
+#ifdef CONFIG_PM
+static int abituguru3_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct abituguru3_data *data = platform_get_drvdata(pdev);
+ /* make sure all communications with the uguru3 are done and no new
+ ones are started */
+ mutex_lock(&data->update_lock);
+ return 0;
+}
+
+static int abituguru3_resume(struct platform_device *pdev)
+{
+ struct abituguru3_data *data = platform_get_drvdata(pdev);
+ mutex_unlock(&data->update_lock);
+ return 0;
+}
+#else
+#define abituguru3_suspend NULL
+#define abituguru3_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver abituguru3_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = ABIT_UGURU3_NAME,
+ },
+ .probe = abituguru3_probe,
+ .remove = __devexit_p(abituguru3_remove),
+ .suspend = abituguru3_suspend,
+ .resume = abituguru3_resume
+};
+
+static int __init abituguru3_detect(void)
+{
+ /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
+ 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
+ at CMD instead, why is unknown. So we test for 0x05 too. */
+ u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
+ u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
+ if (((data_val == 0x00) || (data_val == 0x08)) &&
+ ((cmd_val == 0xAC) || (cmd_val == 0x05)))
+ return ABIT_UGURU3_BASE;
+
+ ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
+ "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
+
+ if (force) {
+ printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
+ "present because of \"force\" parameter\n");
+ return ABIT_UGURU3_BASE;
+ }
+
+ /* No uGuru3 found */
+ return -ENODEV;
+}
+
+static struct platform_device *abituguru3_pdev;
+
+static int __init abituguru3_init(void)
+{
+ int address, err;
+ struct resource res = { .flags = IORESOURCE_IO };
+
+ address = abituguru3_detect();
+ if (address < 0)
+ return address;
+
+ err = platform_driver_register(&abituguru3_driver);
+ if (err)
+ goto exit;
+
+ abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
+ if (!abituguru3_pdev) {
+ printk(KERN_ERR ABIT_UGURU3_NAME
+ ": Device allocation failed\n");
+ err = -ENOMEM;
+ goto exit_driver_unregister;
+ }
+
+ res.start = address;
+ res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
+ res.name = ABIT_UGURU3_NAME;
+
+ err = platform_device_add_resources(abituguru3_pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR ABIT_UGURU3_NAME
+ ": Device resource addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(abituguru3_pdev);
+ if (err) {
+ printk(KERN_ERR ABIT_UGURU3_NAME
+ ": Device addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(abituguru3_pdev);
+exit_driver_unregister:
+ platform_driver_unregister(&abituguru3_driver);
+exit:
+ return err;
+}
+
+static void __exit abituguru3_exit(void)
+{
+ platform_device_unregister(abituguru3_pdev);
+ platform_driver_unregister(&abituguru3_driver);
+}
+
+MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
+MODULE_DESCRIPTION("Abit uGuru3 Sensor device");
+MODULE_LICENSE("GPL");
+
+module_init(abituguru3_init);
+module_exit(abituguru3_exit);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 0328382df8f..7c1795225b0 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -185,6 +185,7 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
/* check for microcode update */
rdmsr_on_cpu(data->id, MSR_IA32_UCODE_REV, &eax, &edx);
if (edx < 0x39) {
+ err = -ENODEV;
dev_err(&pdev->dev,
"Errata AE18 not fixed, update BIOS or "
"microcode of the CPU!\n");
@@ -317,7 +318,7 @@ exit:
}
#ifdef CONFIG_HOTPLUG_CPU
-void coretemp_device_remove(unsigned int cpu)
+static void coretemp_device_remove(unsigned int cpu)
{
struct pdev_entry *p, *n;
mutex_lock(&pdev_list_mutex);
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
new file mode 100644
index 00000000000..be3aaa5d0b9
--- /dev/null
+++ b/drivers/hwmon/dme1737.c
@@ -0,0 +1,2080 @@
+/*
+ * dme1737.c - driver for the SMSC DME1737 and Asus A8000 Super-I/O chips
+ * integrated hardware monitoring features.
+ * Copyright (c) 2007 Juerg Haefliger <juergh@gmail.com>
+ *
+ * This driver is based on the LM85 driver. The hardware monitoring
+ * capabilities of the DME1737 are very similar to the LM85 with some
+ * additional features. Even though the DME1737 is a Super-I/O chip, the
+ * hardware monitoring registers are only accessible via SMBus.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <asm/io.h>
+
+/* Module load parameters */
+static int force_start;
+module_param(force_start, bool, 0);
+MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(dme1737);
+
+/* ---------------------------------------------------------------------
+ * Registers
+ *
+ * The sensors are defined as follows:
+ *
+ * Voltages Temperatures
+ * -------- ------------
+ * in0 +5VTR (+5V stdby) temp1 Remote diode 1
+ * in1 Vccp (proc core) temp2 Internal temp
+ * in2 VCC (internal +3.3V) temp3 Remote diode 2
+ * in3 +5V
+ * in4 +12V
+ * in5 VTR (+3.3V stby)
+ * in6 Vbat
+ *
+ * --------------------------------------------------------------------- */
+
+/* Voltages (in) numbered 0-6 (ix) */
+#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) \
+ : 0x94 + (ix))
+#define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \
+ : 0x91 + (ix) * 2)
+#define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \
+ : 0x92 + (ix) * 2)
+
+/* Temperatures (temp) numbered 0-2 (ix) */
+#define DME1737_REG_TEMP(ix) (0x25 + (ix))
+#define DME1737_REG_TEMP_MIN(ix) (0x4e + (ix) * 2)
+#define DME1737_REG_TEMP_MAX(ix) (0x4f + (ix) * 2)
+#define DME1737_REG_TEMP_OFFSET(ix) ((ix) == 0 ? 0x1f \
+ : 0x1c + (ix))
+
+/* Voltage and temperature LSBs
+ * The LSBs (4 bits each) are stored in 5 registers with the following layouts:
+ * IN_TEMP_LSB(0) = [in5, in6]
+ * IN_TEMP_LSB(1) = [temp3, temp1]
+ * IN_TEMP_LSB(2) = [in4, temp2]
+ * IN_TEMP_LSB(3) = [in3, in0]
+ * IN_TEMP_LSB(4) = [in2, in1] */
+#define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix))
+static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0};
+static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4};
+static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
+static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
+
+/* Fans numbered 0-5 (ix) */
+#define DME1737_REG_FAN(ix) ((ix) < 4 ? 0x28 + (ix) * 2 \
+ : 0xa1 + (ix) * 2)
+#define DME1737_REG_FAN_MIN(ix) ((ix) < 4 ? 0x54 + (ix) * 2 \
+ : 0xa5 + (ix) * 2)
+#define DME1737_REG_FAN_OPT(ix) ((ix) < 4 ? 0x90 + (ix) \
+ : 0xb2 + (ix))
+#define DME1737_REG_FAN_MAX(ix) (0xb4 + (ix)) /* only for fan[4-5] */
+
+/* PWMs numbered 0-2, 4-5 (ix) */
+#define DME1737_REG_PWM(ix) ((ix) < 3 ? 0x30 + (ix) \
+ : 0xa1 + (ix))
+#define DME1737_REG_PWM_CONFIG(ix) (0x5c + (ix)) /* only for pwm[0-2] */
+#define DME1737_REG_PWM_MIN(ix) (0x64 + (ix)) /* only for pwm[0-2] */
+#define DME1737_REG_PWM_FREQ(ix) ((ix) < 3 ? 0x5f + (ix) \
+ : 0xa3 + (ix))
+/* The layout of the ramp rate registers is different from the other pwm
+ * registers. The bits for the 3 PWMs are stored in 2 registers:
+ * PWM_RR(0) = [OFF3, OFF2, OFF1, RES, RR1E, RR1-2, RR1-1, RR1-0]
+ * PWM_RR(1) = [RR2E, RR2-2, RR2-1, RR2-0, RR3E, RR3-2, RR3-1, RR3-0] */
+#define DME1737_REG_PWM_RR(ix) (0x62 + (ix)) /* only for pwm[0-2] */
+
+/* Thermal zones 0-2 */
+#define DME1737_REG_ZONE_LOW(ix) (0x67 + (ix))
+#define DME1737_REG_ZONE_ABS(ix) (0x6a + (ix))
+/* The layout of the hysteresis registers is different from the other zone
+ * registers. The bits for the 3 zones are stored in 2 registers:
+ * ZONE_HYST(0) = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
+ * ZONE_HYST(1) = [H3-3, H3-2, H3-1, H3-0, RES, RES, RES, RES] */
+#define DME1737_REG_ZONE_HYST(ix) (0x6d + (ix))
+
+/* Alarm registers and bit mapping
+ * The 3 8-bit alarm registers will be concatenated to a single 32-bit
+ * alarm value [0, ALARM3, ALARM2, ALARM1]. */
+#define DME1737_REG_ALARM1 0x41
+#define DME1737_REG_ALARM2 0x42
+#define DME1737_REG_ALARM3 0x83
+static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17};
+static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
+static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
+
+/* Miscellaneous registers */
+#define DME1737_REG_COMPANY 0x3e
+#define DME1737_REG_VERSTEP 0x3f
+#define DME1737_REG_CONFIG 0x40
+#define DME1737_REG_CONFIG2 0x7f
+#define DME1737_REG_VID 0x43
+#define DME1737_REG_TACH_PWM 0x81
+
+/* ---------------------------------------------------------------------
+ * Misc defines
+ * --------------------------------------------------------------------- */
+
+/* Chip identification */
+#define DME1737_COMPANY_SMSC 0x5c
+#define DME1737_VERSTEP 0x88
+#define DME1737_VERSTEP_MASK 0xf8
+
+/* ---------------------------------------------------------------------
+ * Data structures and manipulation thereof
+ * --------------------------------------------------------------------- */
+
+struct dme1737_data {
+ struct i2c_client client;
+ struct class_device *class_dev;
+
+ struct mutex update_lock;
+ int valid; /* !=0 if following fields are valid */
+ unsigned long last_update; /* in jiffies */
+ unsigned long last_vbat; /* in jiffies */
+
+ u8 vid;
+ u8 pwm_rr_en;
+ u8 has_pwm;
+ u8 has_fan;
+
+ /* Register values */
+ u16 in[7];
+ u8 in_min[7];
+ u8 in_max[7];
+ s16 temp[3];
+ s8 temp_min[3];
+ s8 temp_max[3];
+ s8 temp_offset[3];
+ u8 config;
+ u8 config2;
+ u8 vrm;
+ u16 fan[6];
+ u16 fan_min[6];
+ u8 fan_max[2];
+ u8 fan_opt[6];
+ u8 pwm[6];
+ u8 pwm_min[3];
+ u8 pwm_config[3];
+ u8 pwm_acz[3];
+ u8 pwm_freq[6];
+ u8 pwm_rr[2];
+ u8 zone_low[3];
+ u8 zone_abs[3];
+ u8 zone_hyst[2];
+ u32 alarms;
+};
+
+/* Nominal voltage values */
+static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300};
+
+/* Voltage input
+ * Voltage inputs have 16 bits resolution, limit values have 8 bits
+ * resolution. */
+static inline int IN_FROM_REG(int reg, int ix, int res)
+{
+ return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2));
+}
+
+static inline int IN_TO_REG(int val, int ix)
+{
+ return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) /
+ IN_NOMINAL[ix], 0, 255);
+}
+
+/* Temperature input
+ * The register values represent temperatures in 2's complement notation from
+ * -127 degrees C to +127 degrees C. Temp inputs have 16 bits resolution, limit
+ * values have 8 bits resolution. */
+static inline int TEMP_FROM_REG(int reg, int res)
+{
+ return (reg * 1000) >> (res - 8);
+}
+
+static inline int TEMP_TO_REG(int val)
+{
+ return SENSORS_LIMIT((val < 0 ? val - 500 : val + 500) / 1000,
+ -128, 127);
+}
+
+/* Temperature range */
+static const int TEMP_RANGE[] = {2000, 2500, 3333, 4000, 5000, 6666, 8000,
+ 10000, 13333, 16000, 20000, 26666, 32000,
+ 40000, 53333, 80000};
+
+static inline int TEMP_RANGE_FROM_REG(int reg)
+{
+ return TEMP_RANGE[(reg >> 4) & 0x0f];
+}
+
+static int TEMP_RANGE_TO_REG(int val, int reg)
+{
+ int i;
+
+ for (i = 15; i > 0; i--) {
+ if (val > (TEMP_RANGE[i] + TEMP_RANGE[i - 1] + 1) / 2) {
+ break;
+ }
+ }
+
+ return (reg & 0x0f) | (i << 4);
+}
+
+/* Temperature hysteresis
+ * Register layout:
+ * reg[0] = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
+ * reg[1] = [H3-3, H3-2, H3-1, H3-0, xxxx, xxxx, xxxx, xxxx] */
+static inline int TEMP_HYST_FROM_REG(int reg, int ix)
+{
+ return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000;
+}
+
+static inline int TEMP_HYST_TO_REG(int val, int ix, int reg)
+{
+ int hyst = SENSORS_LIMIT((val + 500) / 1000, 0, 15);
+
+ return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4);
+}
+
+/* Fan input RPM */
+static inline int FAN_FROM_REG(int reg, int tpc)
+{
+ return (reg == 0 || reg == 0xffff) ? 0 :
+ (tpc == 0) ? 90000 * 60 / reg : tpc * reg;
+}
+
+static inline int FAN_TO_REG(int val, int tpc)
+{
+ return SENSORS_LIMIT((tpc == 0) ? 90000 * 60 / val : val / tpc,
+ 0, 0xffff);
+}
+
+/* Fan TPC (tach pulse count)
+ * Converts a register value to a TPC multiplier or returns 0 if the tachometer
+ * is configured in legacy (non-tpc) mode */
+static inline int FAN_TPC_FROM_REG(int reg)
+{
+ return (reg & 0x20) ? 0 : 60 >> (reg & 0x03);
+}
+
+/* Fan type
+ * The type of a fan is expressed in number of pulses-per-revolution that it
+ * emits */
+static inline int FAN_TYPE_FROM_REG(int reg)
+{
+ int edge = (reg >> 1) & 0x03;
+
+ return (edge > 0) ? 1 << (edge - 1) : 0;
+}
+
+static inline int FAN_TYPE_TO_REG(int val, int reg)
+{
+ int edge = (val == 4) ? 3 : val;
+
+ return (reg & 0xf9) | (edge << 1);
+}
+
+/* Fan max RPM */
+static const int FAN_MAX[] = {0x54, 0x38, 0x2a, 0x21, 0x1c, 0x18, 0x15, 0x12,
+ 0x11, 0x0f, 0x0e};
+
+static int FAN_MAX_FROM_REG(int reg)
+{
+ int i;
+
+ for (i = 10; i > 0; i--) {
+ if (reg == FAN_MAX[i]) {
+ break;
+ }
+ }
+
+ return 1000 + i * 500;
+}
+
+static int FAN_MAX_TO_REG(int val)
+{
+ int i;
+
+ for (i = 10; i > 0; i--) {
+ if (val > (1000 + (i - 1) * 500)) {
+ break;
+ }
+ }
+
+ return FAN_MAX[i];
+}
+
+/* PWM enable
+ * Register to enable mapping:
+ * 000: 2 fan on zone 1 auto
+ * 001: 2 fan on zone 2 auto
+ * 010: 2 fan on zone 3 auto
+ * 011: 0 fan full on
+ * 100: -1 fan disabled
+ * 101: 2 fan on hottest of zones 2,3 auto
+ * 110: 2 fan on hottest of zones 1,2,3 auto
+ * 111: 1 fan in manual mode */
+static inline int PWM_EN_FROM_REG(int reg)
+{
+ static const int en[] = {2, 2, 2, 0, -1, 2, 2, 1};
+
+ return en[(reg >> 5) & 0x07];
+}
+
+static inline int PWM_EN_TO_REG(int val, int reg)
+{
+ int en = (val == 1) ? 7 : 3;
+
+ return (reg & 0x1f) | ((en & 0x07) << 5);
+}
+
+/* PWM auto channels zone
+ * Register to auto channels zone mapping (ACZ is a bitfield with bit x
+ * corresponding to zone x+1):
+ * 000: 001 fan on zone 1 auto
+ * 001: 010 fan on zone 2 auto
+ * 010: 100 fan on zone 3 auto
+ * 011: 000 fan full on
+ * 100: 000 fan disabled
+ * 101: 110 fan on hottest of zones 2,3 auto
+ * 110: 111 fan on hottest of zones 1,2,3 auto
+ * 111: 000 fan in manual mode */
+static inline int PWM_ACZ_FROM_REG(int reg)
+{
+ static const int acz[] = {1, 2, 4, 0, 0, 6, 7, 0};
+
+ return acz[(reg >> 5) & 0x07];
+}
+
+static inline int PWM_ACZ_TO_REG(int val, int reg)
+{
+ int acz = (val == 4) ? 2 : val - 1;
+
+ return (reg & 0x1f) | ((acz & 0x07) << 5);
+}
+
+/* PWM frequency */
+static const int PWM_FREQ[] = {11, 15, 22, 29, 35, 44, 59, 88,
+ 15000, 20000, 30000, 25000, 0, 0, 0, 0};
+
+static inline int PWM_FREQ_FROM_REG(int reg)
+{
+ return PWM_FREQ[reg & 0x0f];
+}
+
+static int PWM_FREQ_TO_REG(int val, int reg)
+{
+ int i;
+
+ /* the first two cases are special - stupid chip design! */
+ if (val > 27500) {
+ i = 10;
+ } else if (val > 22500) {
+ i = 11;
+ } else {
+ for (i = 9; i > 0; i--) {
+ if (val > (PWM_FREQ[i] + PWM_FREQ[i - 1] + 1) / 2) {
+ break;
+ }
+ }
+ }
+
+ return (reg & 0xf0) | i;
+}
+
+/* PWM ramp rate
+ * Register layout:
+ * reg[0] = [OFF3, OFF2, OFF1, RES, RR1-E, RR1-2, RR1-1, RR1-0]
+ * reg[1] = [RR2-E, RR2-2, RR2-1, RR2-0, RR3-E, RR3-2, RR3-1, RR3-0] */
+static const u8 PWM_RR[] = {206, 104, 69, 41, 26, 18, 10, 5};
+
+static inline int PWM_RR_FROM_REG(int reg, int ix)
+{
+ int rr = (ix == 1) ? reg >> 4 : reg;
+
+ return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0;
+}
+
+static int PWM_RR_TO_REG(int val, int ix, int reg)
+{
+ int i;
+
+ for (i = 0; i < 7; i++) {
+ if (val > (PWM_RR[i] + PWM_RR[i + 1] + 1) / 2) {
+ break;
+ }
+ }
+
+ return (ix == 1) ? (reg & 0x8f) | (i << 4) : (reg & 0xf8) | i;
+}
+
+/* PWM ramp rate enable */
+static inline int PWM_RR_EN_FROM_REG(int reg, int ix)
+{
+ return PWM_RR_FROM_REG(reg, ix) ? 1 : 0;
+}
+
+static inline int PWM_RR_EN_TO_REG(int val, int ix, int reg)
+{
+ int en = (ix == 1) ? 0x80 : 0x08;
+
+ return val ? reg | en : reg & ~en;
+}
+
+/* PWM min/off
+ * The PWM min/off bits are part of the PMW ramp rate register 0 (see above for
+ * the register layout). */
+static inline int PWM_OFF_FROM_REG(int reg, int ix)
+{
+ return (reg >> (ix + 5)) & 0x01;
+}
+
+static inline int PWM_OFF_TO_REG(int val, int ix, int reg)
+{
+ return (reg & ~(1 << (ix + 5))) | ((val & 0x01) << (ix + 5));
+}
+
+/* ---------------------------------------------------------------------
+ * Device I/O access
+ * --------------------------------------------------------------------- */
+
+static u8 dme1737_read(struct i2c_client *client, u8 reg)
+{
+ s32 val = i2c_smbus_read_byte_data(client, reg);
+
+ if (val < 0) {
+ dev_warn(&client->dev, "Read from register 0x%02x failed! "
+ "Please report to the driver maintainer.\n", reg);
+ }
+
+ return val;
+}
+
+static s32 dme1737_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ s32 res = i2c_smbus_write_byte_data(client, reg, value);
+
+ if (res < 0) {
+ dev_warn(&client->dev, "Write to register 0x%02x failed! "
+ "Please report to the driver maintainer.\n", reg);
+ }
+
+ return res;
+}
+
+static struct dme1737_data *dme1737_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ int ix;
+ u8 lsb[5];
+
+ mutex_lock(&data->update_lock);
+
+ /* Enable a Vbat monitoring cycle every 10 mins */
+ if (time_after(jiffies, data->last_vbat + 600 * HZ) || !data->valid) {
+ dme1737_write(client, DME1737_REG_CONFIG, dme1737_read(client,
+ DME1737_REG_CONFIG) | 0x10);
+ data->last_vbat = jiffies;
+ }
+
+ /* Sample register contents every 1 sec */
+ if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
+ data->vid = dme1737_read(client, DME1737_REG_VID) & 0x3f;
+
+ /* In (voltage) registers */
+ for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+ /* Voltage inputs are stored as 16 bit values even
+ * though they have only 12 bits resolution. This is
+ * to make it consistent with the temp inputs. */
+ data->in[ix] = dme1737_read(client,
+ DME1737_REG_IN(ix)) << 8;
+ data->in_min[ix] = dme1737_read(client,
+ DME1737_REG_IN_MIN(ix));
+ data->in_max[ix] = dme1737_read(client,
+ DME1737_REG_IN_MAX(ix));
+ }
+
+ /* Temp registers */
+ for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
+ /* Temp inputs are stored as 16 bit values even
+ * though they have only 12 bits resolution. This is
+ * to take advantage of implicit conversions between
+ * register values (2's complement) and temp values
+ * (signed decimal). */
+ data->temp[ix] = dme1737_read(client,
+ DME1737_REG_TEMP(ix)) << 8;
+ data->temp_min[ix] = dme1737_read(client,
+ DME1737_REG_TEMP_MIN(ix));
+ data->temp_max[ix] = dme1737_read(client,
+ DME1737_REG_TEMP_MAX(ix));
+ data->temp_offset[ix] = dme1737_read(client,
+ DME1737_REG_TEMP_OFFSET(ix));
+ }
+
+ /* In and temp LSB registers
+ * The LSBs are latched when the MSBs are read, so the order in
+ * which the registers are read (MSB first, then LSB) is
+ * important! */
+ for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
+ lsb[ix] = dme1737_read(client,
+ DME1737_REG_IN_TEMP_LSB(ix));
+ }
+ for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+ data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
+ DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
+ }
+ for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
+ data->temp[ix] |= (lsb[DME1737_REG_TEMP_LSB[ix]] <<
+ DME1737_REG_TEMP_LSB_SHL[ix]) & 0xf0;
+ }
+
+ /* Fan registers */
+ for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
+ /* Skip reading registers if optional fans are not
+ * present */
+ if (!(data->has_fan & (1 << ix))) {
+ continue;
+ }
+ data->fan[ix] = dme1737_read(client,
+ DME1737_REG_FAN(ix));
+ data->fan[ix] |= dme1737_read(client,
+ DME1737_REG_FAN(ix) + 1) << 8;
+ data->fan_min[ix] = dme1737_read(client,
+ DME1737_REG_FAN_MIN(ix));
+ data->fan_min[ix] |= dme1737_read(client,
+ DME1737_REG_FAN_MIN(ix) + 1) << 8;
+ data->fan_opt[ix] = dme1737_read(client,
+ DME1737_REG_FAN_OPT(ix));
+ /* fan_max exists only for fan[5-6] */
+ if (ix > 3) {
+ data->fan_max[ix - 4] = dme1737_read(client,
+ DME1737_REG_FAN_MAX(ix));
+ }
+ }
+
+ /* PWM registers */
+ for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) {
+ /* Skip reading registers if optional PWMs are not
+ * present */
+ if (!(data->has_pwm & (1 << ix))) {
+ continue;
+ }
+ data->pwm[ix] = dme1737_read(client,
+ DME1737_REG_PWM(ix));
+ data->pwm_freq[ix] = dme1737_read(client,
+ DME1737_REG_PWM_FREQ(ix));
+ /* pwm_config and pwm_min exist only for pwm[1-3] */
+ if (ix < 3) {
+ data->pwm_config[ix] = dme1737_read(client,
+ DME1737_REG_PWM_CONFIG(ix));
+ data->pwm_min[ix] = dme1737_read(client,
+ DME1737_REG_PWM_MIN(ix));
+ }
+ }
+ for (ix = 0; ix < ARRAY_SIZE(data->pwm_rr); ix++) {
+ data->pwm_rr[ix] = dme1737_read(client,
+ DME1737_REG_PWM_RR(ix));
+ }
+
+ /* Thermal zone registers */
+ for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) {
+ data->zone_low[ix] = dme1737_read(client,
+ DME1737_REG_ZONE_LOW(ix));
+ data->zone_abs[ix] = dme1737_read(client,
+ DME1737_REG_ZONE_ABS(ix));
+ }
+ for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
+ data->zone_hyst[ix] = dme1737_read(client,
+ DME1737_REG_ZONE_HYST(ix));
+ }
+
+ /* Alarm registers */
+ data->alarms = dme1737_read(client,
+ DME1737_REG_ALARM1);
+ /* Bit 7 tells us if the other alarm registers are non-zero and
+ * therefore also need to be read */
+ if (data->alarms & 0x80) {
+ data->alarms |= dme1737_read(client,
+ DME1737_REG_ALARM2) << 8;
+ data->alarms |= dme1737_read(client,
+ DME1737_REG_ALARM3) << 16;
+ }
+
+ data->last_update = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+/* ---------------------------------------------------------------------
+ * Voltage sysfs attributes
+ * ix = [0-5]
+ * --------------------------------------------------------------------- */
+
+#define SYS_IN_INPUT 0
+#define SYS_IN_MIN 1
+#define SYS_IN_MAX 2
+#define SYS_IN_ALARM 3
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dme1737_data *data = dme1737_update_device(dev);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ int res;
+
+ switch (fn) {
+ case SYS_IN_INPUT:
+ res = IN_FROM_REG(data->in[ix], ix, 16);
+ break;
+ case SYS_IN_MIN:
+ res = IN_FROM_REG(data->in_min[ix], ix, 8);
+ break;
+ case SYS_IN_MAX:
+ res = IN_FROM_REG(data->in_max[ix], ix, 8);
+ break;
+ case SYS_IN_ALARM:
+ res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
+ break;
+ default:
+ res = 0;
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+
+ return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ switch (fn) {
+ case SYS_IN_MIN:
+ data->in_min[ix] = IN_TO_REG(val, ix);
+ dme1737_write(client, DME1737_REG_IN_MIN(ix),
+ data->in_min[ix]);
+ break;
+ case SYS_IN_MAX:
+ data->in_max[ix] = IN_TO_REG(val, ix);
+ dme1737_write(client, DME1737_REG_IN_MAX(ix),
+ data->in_max[ix]);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Temperature sysfs attributes
+ * ix = [0-2]
+ * --------------------------------------------------------------------- */
+
+#define SYS_TEMP_INPUT 0
+#define SYS_TEMP_MIN 1
+#define SYS_TEMP_MAX 2
+#define SYS_TEMP_OFFSET 3
+#define SYS_TEMP_ALARM 4
+#define SYS_TEMP_FAULT 5
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dme1737_data *data = dme1737_update_device(dev);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ int res;
+
+ switch (fn) {
+ case SYS_TEMP_INPUT:
+ res = TEMP_FROM_REG(data->temp[ix], 16);
+ break;
+ case SYS_TEMP_MIN:
+ res = TEMP_FROM_REG(data->temp_min[ix], 8);
+ break;
+ case SYS_TEMP_MAX:
+ res = TEMP_FROM_REG(data->temp_max[ix], 8);
+ break;
+ case SYS_TEMP_OFFSET:
+ res = TEMP_FROM_REG(data->temp_offset[ix], 8);
+ break;
+ case SYS_TEMP_ALARM:
+ res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01;
+ break;
+ case SYS_TEMP_FAULT:
+ res = (data->temp[ix] == 0x0800);
+ break;
+ default:
+ res = 0;
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+
+ return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ switch (fn) {
+ case SYS_TEMP_MIN:
+ data->temp_min[ix] = TEMP_TO_REG(val);
+ dme1737_write(client, DME1737_REG_TEMP_MIN(ix),
+ data->temp_min[ix]);
+ break;
+ case SYS_TEMP_MAX:
+ data->temp_max[ix] = TEMP_TO_REG(val);
+ dme1737_write(client, DME1737_REG_TEMP_MAX(ix),
+ data->temp_max[ix]);
+ break;
+ case SYS_TEMP_OFFSET:
+ data->temp_offset[ix] = TEMP_TO_REG(val);
+ dme1737_write(client, DME1737_REG_TEMP_OFFSET(ix),
+ data->temp_offset[ix]);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Zone sysfs attributes
+ * ix = [0-2]
+ * --------------------------------------------------------------------- */
+
+#define SYS_ZONE_AUTO_CHANNELS_TEMP 0
+#define SYS_ZONE_AUTO_POINT1_TEMP_HYST 1
+#define SYS_ZONE_AUTO_POINT1_TEMP 2
+#define SYS_ZONE_AUTO_POINT2_TEMP 3
+#define SYS_ZONE_AUTO_POINT3_TEMP 4
+
+static ssize_t show_zone(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dme1737_data *data = dme1737_update_device(dev);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ int res;
+
+ switch (fn) {
+ case SYS_ZONE_AUTO_CHANNELS_TEMP:
+ /* check config2 for non-standard temp-to-zone mapping */
+ if ((ix == 1) && (data->config2 & 0x02)) {
+ res = 4;
+ } else {
+ res = 1 << ix;
+ }
+ break;
+ case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
+ res = TEMP_FROM_REG(data->zone_low[ix], 8) -
+ TEMP_HYST_FROM_REG(data->zone_hyst[ix == 2], ix);
+ break;
+ case SYS_ZONE_AUTO_POINT1_TEMP:
+ res = TEMP_FROM_REG(data->zone_low[ix], 8);
+ break;
+ case SYS_ZONE_AUTO_POINT2_TEMP:
+ /* pwm_freq holds the temp range bits in the upper nibble */
+ res = TEMP_FROM_REG(data->zone_low[ix], 8) +
+ TEMP_RANGE_FROM_REG(data->pwm_freq[ix]);
+ break;
+ case SYS_ZONE_AUTO_POINT3_TEMP:
+ res = TEMP_FROM_REG(data->zone_abs[ix], 8);
+ break;
+ default:
+ res = 0;
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+
+ return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_zone(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ switch (fn) {
+ case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
+ /* Refresh the cache */
+ data->zone_low[ix] = dme1737_read(client,
+ DME1737_REG_ZONE_LOW(ix));
+ /* Modify the temp hyst value */
+ data->zone_hyst[ix == 2] = TEMP_HYST_TO_REG(
+ TEMP_FROM_REG(data->zone_low[ix], 8) -
+ val, ix, dme1737_read(client,
+ DME1737_REG_ZONE_HYST(ix == 2)));
+ dme1737_write(client, DME1737_REG_ZONE_HYST(ix == 2),
+ data->zone_hyst[ix == 2]);
+ break;
+ case SYS_ZONE_AUTO_POINT1_TEMP:
+ data->zone_low[ix] = TEMP_TO_REG(val);
+ dme1737_write(client, DME1737_REG_ZONE_LOW(ix),
+ data->zone_low[ix]);
+ break;
+ case SYS_ZONE_AUTO_POINT2_TEMP:
+ /* Refresh the cache */
+ data->zone_low[ix] = dme1737_read(client,
+ DME1737_REG_ZONE_LOW(ix));
+ /* Modify the temp range value (which is stored in the upper
+ * nibble of the pwm_freq register) */
+ data->pwm_freq[ix] = TEMP_RANGE_TO_REG(val -
+ TEMP_FROM_REG(data->zone_low[ix], 8),
+ dme1737_read(client,
+ DME1737_REG_PWM_FREQ(ix)));
+ dme1737_write(client, DME1737_REG_PWM_FREQ(ix),
+ data->pwm_freq[ix]);
+ break;
+ case SYS_ZONE_AUTO_POINT3_TEMP:
+ data->zone_abs[ix] = TEMP_TO_REG(val);
+ dme1737_write(client, DME1737_REG_ZONE_ABS(ix),
+ data->zone_abs[ix]);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Fan sysfs attributes
+ * ix = [0-5]
+ * --------------------------------------------------------------------- */
+
+#define SYS_FAN_INPUT 0
+#define SYS_FAN_MIN 1
+#define SYS_FAN_MAX 2
+#define SYS_FAN_ALARM 3
+#define SYS_FAN_TYPE 4
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dme1737_data *data = dme1737_update_device(dev);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ int res;
+
+ switch (fn) {
+ case SYS_FAN_INPUT:
+ res = FAN_FROM_REG(data->fan[ix],
+ ix < 4 ? 0 :
+ FAN_TPC_FROM_REG(data->fan_opt[ix]));
+ break;
+ case SYS_FAN_MIN:
+ res = FAN_FROM_REG(data->fan_min[ix],
+ ix < 4 ? 0 :
+ FAN_TPC_FROM_REG(data->fan_opt[ix]));
+ break;
+ case SYS_FAN_MAX:
+ /* only valid for fan[5-6] */
+ res = FAN_MAX_FROM_REG(data->fan_max[ix - 4]);
+ break;
+ case SYS_FAN_ALARM:
+ res = (data->alarms >> DME1737_BIT_ALARM_FAN[ix]) & 0x01;
+ break;
+ case SYS_FAN_TYPE:
+ /* only valid for fan[1-4] */
+ res = FAN_TYPE_FROM_REG(data->fan_opt[ix]);
+ break;
+ default:
+ res = 0;
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+
+ return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ switch (fn) {
+ case SYS_FAN_MIN:
+ if (ix < 4) {
+ data->fan_min[ix] = FAN_TO_REG(val, 0);
+ } else {
+ /* Refresh the cache */
+ data->fan_opt[ix] = dme1737_read(client,
+ DME1737_REG_FAN_OPT(ix));
+ /* Modify the fan min value */
+ data->fan_min[ix] = FAN_TO_REG(val,
+ FAN_TPC_FROM_REG(data->fan_opt[ix]));
+ }
+ dme1737_write(client, DME1737_REG_FAN_MIN(ix),
+ data->fan_min[ix] & 0xff);
+ dme1737_write(client, DME1737_REG_FAN_MIN(ix) + 1,
+ data->fan_min[ix] >> 8);
+ break;
+ case SYS_FAN_MAX:
+ /* Only valid for fan[5-6] */
+ data->fan_max[ix - 4] = FAN_MAX_TO_REG(val);
+ dme1737_write(client, DME1737_REG_FAN_MAX(ix),
+ data->fan_max[ix - 4]);
+ break;
+ case SYS_FAN_TYPE:
+ /* Only valid for fan[1-4] */
+ if (!(val == 1 || val == 2 || val == 4)) {
+ count = -EINVAL;
+ dev_warn(&client->dev, "Fan type value %ld not "
+ "supported. Choose one of 1, 2, or 4.\n",
+ val);
+ goto exit;
+ }
+ data->fan_opt[ix] = FAN_TYPE_TO_REG(val, dme1737_read(client,
+ DME1737_REG_FAN_OPT(ix)));
+ dme1737_write(client, DME1737_REG_FAN_OPT(ix),
+ data->fan_opt[ix]);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+exit:
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* ---------------------------------------------------------------------
+ * PWM sysfs attributes
+ * ix = [0-4]
+ * --------------------------------------------------------------------- */
+
+#define SYS_PWM 0
+#define SYS_PWM_FREQ 1
+#define SYS_PWM_ENABLE 2
+#define SYS_PWM_RAMP_RATE 3
+#define SYS_PWM_AUTO_CHANNELS_ZONE 4
+#define SYS_PWM_AUTO_PWM_MIN 5
+#define SYS_PWM_AUTO_POINT1_PWM 6
+#define SYS_PWM_AUTO_POINT2_PWM 7
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dme1737_data *data = dme1737_update_device(dev);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ int res;
+
+ switch (fn) {
+ case SYS_PWM:
+ if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 0) {
+ res = 255;
+ } else {
+ res = data->pwm[ix];
+ }
+ break;
+ case SYS_PWM_FREQ:
+ res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]);
+ break;
+ case SYS_PWM_ENABLE:
+ if (ix > 3) {
+ res = 1; /* pwm[5-6] hard-wired to manual mode */
+ } else {
+ res = PWM_EN_FROM_REG(data->pwm_config[ix]);
+ }
+ break;
+ case SYS_PWM_RAMP_RATE:
+ /* Only valid for pwm[1-3] */
+ res = PWM_RR_FROM_REG(data->pwm_rr[ix > 0], ix);
+ break;
+ case SYS_PWM_AUTO_CHANNELS_ZONE:
+ /* Only valid for pwm[1-3] */
+ if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
+ res = PWM_ACZ_FROM_REG(data->pwm_config[ix]);
+ } else {
+ res = data->pwm_acz[ix];
+ }
+ break;
+ case SYS_PWM_AUTO_PWM_MIN:
+ /* Only valid for pwm[1-3] */
+ if (PWM_OFF_FROM_REG(data->pwm_rr[0], ix)) {
+ res = data->pwm_min[ix];
+ } else {
+ res = 0;
+ }
+ break;
+ case SYS_PWM_AUTO_POINT1_PWM:
+ /* Only valid for pwm[1-3] */
+ res = data->pwm_min[ix];
+ break;
+ case SYS_PWM_AUTO_POINT2_PWM:
+ /* Only valid for pwm[1-3] */
+ res = 255; /* hard-wired */
+ break;
+ default:
+ res = 0;
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+
+ return sprintf(buf, "%d\n", res);
+}
+
+static struct attribute *dme1737_attr_pwm[];
+static void dme1737_chmod_file(struct i2c_client*, struct attribute*, mode_t);
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2
+ *sensor_attr_2 = to_sensor_dev_attr_2(attr);
+ int ix = sensor_attr_2->index;
+ int fn = sensor_attr_2->nr;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ switch (fn) {
+ case SYS_PWM:
+ data->pwm[ix] = SENSORS_LIMIT(val, 0, 255);
+ dme1737_write(client, DME1737_REG_PWM(ix), data->pwm[ix]);
+ break;
+ case SYS_PWM_FREQ:
+ data->pwm_freq[ix] = PWM_FREQ_TO_REG(val, dme1737_read(client,
+ DME1737_REG_PWM_FREQ(ix)));
+ dme1737_write(client, DME1737_REG_PWM_FREQ(ix),
+ data->pwm_freq[ix]);
+ break;
+ case SYS_PWM_ENABLE:
+ /* Only valid for pwm[1-3] */
+ if (val < 0 || val > 2) {
+ count = -EINVAL;
+ dev_warn(&client->dev, "PWM enable %ld not "
+ "supported. Choose one of 0, 1, or 2.\n",
+ val);
+ goto exit;
+ }
+ /* Refresh the cache */
+ data->pwm_config[ix] = dme1737_read(client,
+ DME1737_REG_PWM_CONFIG(ix));
+ if (val == PWM_EN_FROM_REG(data->pwm_config[ix])) {
+ /* Bail out if no change */
+ goto exit;
+ }
+ /* Do some housekeeping if we are currently in auto mode */
+ if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
+ /* Save the current zone channel assignment */
+ data->pwm_acz[ix] = PWM_ACZ_FROM_REG(
+ data->pwm_config[ix]);
+ /* Save the current ramp rate state and disable it */
+ data->pwm_rr[ix > 0] = dme1737_read(client,
+ DME1737_REG_PWM_RR(ix > 0));
+ data->pwm_rr_en &= ~(1 << ix);
+ if (PWM_RR_EN_FROM_REG(data->pwm_rr[ix > 0], ix)) {
+ data->pwm_rr_en |= (1 << ix);
+ data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(0, ix,
+ data->pwm_rr[ix > 0]);
+ dme1737_write(client,
+ DME1737_REG_PWM_RR(ix > 0),
+ data->pwm_rr[ix > 0]);
+ }
+ }
+ /* Set the new PWM mode */
+ switch (val) {
+ case 0:
+ /* Change permissions of pwm[ix] to read-only */
+ dme1737_chmod_file(client, dme1737_attr_pwm[ix],
+ S_IRUGO);
+ /* Turn fan fully on */
+ data->pwm_config[ix] = PWM_EN_TO_REG(0,
+ data->pwm_config[ix]);
+ dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
+ data->pwm_config[ix]);
+ break;
+ case 1:
+ /* Turn on manual mode */
+ data->pwm_config[ix] = PWM_EN_TO_REG(1,
+ data->pwm_config[ix]);
+ dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
+ data->pwm_config[ix]);
+ /* Change permissions of pwm[ix] to read-writeable */
+ dme1737_chmod_file(client, dme1737_attr_pwm[ix],
+ S_IRUGO | S_IWUSR);
+ break;
+ case 2:
+ /* Change permissions of pwm[ix] to read-only */
+ dme1737_chmod_file(client, dme1737_attr_pwm[ix],
+ S_IRUGO);
+ /* Turn on auto mode using the saved zone channel
+ * assignment */
+ data->pwm_config[ix] = PWM_ACZ_TO_REG(
+ data->pwm_acz[ix],
+ data->pwm_config[ix]);
+ dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
+ data->pwm_config[ix]);
+ /* Enable PWM ramp rate if previously enabled */
+ if (data->pwm_rr_en & (1 << ix)) {
+ data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(1, ix,
+ dme1737_read(client,
+ DME1737_REG_PWM_RR(ix > 0)));
+ dme1737_write(client,
+ DME1737_REG_PWM_RR(ix > 0),
+ data->pwm_rr[ix > 0]);
+ }
+ break;
+ }
+ break;
+ case SYS_PWM_RAMP_RATE:
+ /* Only valid for pwm[1-3] */
+ /* Refresh the cache */
+ data->pwm_config[ix] = dme1737_read(client,
+ DME1737_REG_PWM_CONFIG(ix));
+ data->pwm_rr[ix > 0] = dme1737_read(client,
+ DME1737_REG_PWM_RR(ix > 0));
+ /* Set the ramp rate value */
+ if (val > 0) {
+ data->pwm_rr[ix > 0] = PWM_RR_TO_REG(val, ix,
+ data->pwm_rr[ix > 0]);
+ }
+ /* Enable/disable the feature only if the associated PWM
+ * output is in automatic mode. */
+ if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
+ data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(val > 0, ix,
+ data->pwm_rr[ix > 0]);
+ }
+ dme1737_write(client, DME1737_REG_PWM_RR(ix > 0),
+ data->pwm_rr[ix > 0]);
+ break;
+ case SYS_PWM_AUTO_CHANNELS_ZONE:
+ /* Only valid for pwm[1-3] */
+ if (!(val == 1 || val == 2 || val == 4 ||
+ val == 6 || val == 7)) {
+ count = -EINVAL;
+ dev_warn(&client->dev, "PWM auto channels zone %ld "
+ "not supported. Choose one of 1, 2, 4, 6, "
+ "or 7.\n", val);
+ goto exit;
+ }
+ /* Refresh the cache */
+ data->pwm_config[ix] = dme1737_read(client,
+ DME1737_REG_PWM_CONFIG(ix));
+ if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
+ /* PWM is already in auto mode so update the temp
+ * channel assignment */
+ data->pwm_config[ix] = PWM_ACZ_TO_REG(val,
+ data->pwm_config[ix]);
+ dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
+ data->pwm_config[ix]);
+ } else {
+ /* PWM is not in auto mode so we save the temp
+ * channel assignment for later use */
+ data->pwm_acz[ix] = val;
+ }
+ break;
+ case SYS_PWM_AUTO_PWM_MIN:
+ /* Only valid for pwm[1-3] */
+ /* Refresh the cache */
+ data->pwm_min[ix] = dme1737_read(client,
+ DME1737_REG_PWM_MIN(ix));
+ /* There are only 2 values supported for the auto_pwm_min
+ * value: 0 or auto_point1_pwm. So if the temperature drops
+ * below the auto_point1_temp_hyst value, the fan either turns
+ * off or runs at auto_point1_pwm duty-cycle. */
+ if (val > ((data->pwm_min[ix] + 1) / 2)) {
+ data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix,
+ dme1737_read(client,
+ DME1737_REG_PWM_RR(0)));
+
+ } else {
+ data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix,
+ dme1737_read(client,
+ DME1737_REG_PWM_RR(0)));
+
+ }
+ dme1737_write(client, DME1737_REG_PWM_RR(0),
+ data->pwm_rr[0]);
+ break;
+ case SYS_PWM_AUTO_POINT1_PWM:
+ /* Only valid for pwm[1-3] */
+ data->pwm_min[ix] = SENSORS_LIMIT(val, 0, 255);
+ dme1737_write(client, DME1737_REG_PWM_MIN(ix),
+ data->pwm_min[ix]);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ }
+exit:
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Miscellaneous sysfs attributes
+ * --------------------------------------------------------------------- */
+
+static ssize_t show_vrm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ data->vrm = val;
+ return count;
+}
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dme1737_data *data = dme1737_update_device(dev);
+
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+/* ---------------------------------------------------------------------
+ * Sysfs device attribute defines and structs
+ * --------------------------------------------------------------------- */
+
+/* Voltages 0-6 */
+
+#define SENSOR_DEVICE_ATTR_IN(ix) \
+static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
+ show_in, NULL, SYS_IN_INPUT, ix); \
+static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \
+ show_in, set_in, SYS_IN_MIN, ix); \
+static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \
+ show_in, set_in, SYS_IN_MAX, ix); \
+static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \
+ show_in, NULL, SYS_IN_ALARM, ix)
+
+SENSOR_DEVICE_ATTR_IN(0);
+SENSOR_DEVICE_ATTR_IN(1);
+SENSOR_DEVICE_ATTR_IN(2);
+SENSOR_DEVICE_ATTR_IN(3);
+SENSOR_DEVICE_ATTR_IN(4);
+SENSOR_DEVICE_ATTR_IN(5);
+SENSOR_DEVICE_ATTR_IN(6);
+
+/* Temperatures 1-3 */
+
+#define SENSOR_DEVICE_ATTR_TEMP(ix) \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \
+ show_temp, NULL, SYS_TEMP_INPUT, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \
+ show_temp, set_temp, SYS_TEMP_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \
+ show_temp, set_temp, SYS_TEMP_MAX, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \
+ show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \
+ show_temp, NULL, SYS_TEMP_ALARM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \
+ show_temp, NULL, SYS_TEMP_FAULT, ix-1)
+
+SENSOR_DEVICE_ATTR_TEMP(1);
+SENSOR_DEVICE_ATTR_TEMP(2);
+SENSOR_DEVICE_ATTR_TEMP(3);
+
+/* Zones 1-3 */
+
+#define SENSOR_DEVICE_ATTR_ZONE(ix) \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \
+ show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1)
+
+SENSOR_DEVICE_ATTR_ZONE(1);
+SENSOR_DEVICE_ATTR_ZONE(2);
+SENSOR_DEVICE_ATTR_ZONE(3);
+
+/* Fans 1-4 */
+
+#define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
+ show_fan, NULL, SYS_FAN_INPUT, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
+ show_fan, set_fan, SYS_FAN_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
+ show_fan, NULL, SYS_FAN_ALARM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \
+ show_fan, set_fan, SYS_FAN_TYPE, ix-1)
+
+SENSOR_DEVICE_ATTR_FAN_1TO4(1);
+SENSOR_DEVICE_ATTR_FAN_1TO4(2);
+SENSOR_DEVICE_ATTR_FAN_1TO4(3);
+SENSOR_DEVICE_ATTR_FAN_1TO4(4);
+
+/* Fans 5-6 */
+
+#define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
+ show_fan, NULL, SYS_FAN_INPUT, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
+ show_fan, set_fan, SYS_FAN_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
+ show_fan, NULL, SYS_FAN_ALARM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \
+ show_fan, set_fan, SYS_FAN_MAX, ix-1)
+
+SENSOR_DEVICE_ATTR_FAN_5TO6(5);
+SENSOR_DEVICE_ATTR_FAN_5TO6(6);
+
+/* PWMs 1-3 */
+
+#define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \
+static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
+ show_pwm, set_pwm, SYS_PWM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
+ show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
+ show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \
+ show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \
+ show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \
+ show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \
+ show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \
+ show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1)
+
+SENSOR_DEVICE_ATTR_PWM_1TO3(1);
+SENSOR_DEVICE_ATTR_PWM_1TO3(2);
+SENSOR_DEVICE_ATTR_PWM_1TO3(3);
+
+/* PWMs 5-6 */
+
+#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
+static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \
+ show_pwm, set_pwm, SYS_PWM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
+ show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
+ show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
+
+SENSOR_DEVICE_ATTR_PWM_5TO6(5);
+SENSOR_DEVICE_ATTR_PWM_5TO6(6);
+
+/* Misc */
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+#define SENSOR_DEV_ATTR_IN(ix) \
+&sensor_dev_attr_in##ix##_input.dev_attr.attr, \
+&sensor_dev_attr_in##ix##_min.dev_attr.attr, \
+&sensor_dev_attr_in##ix##_max.dev_attr.attr, \
+&sensor_dev_attr_in##ix##_alarm.dev_attr.attr
+
+/* These attributes are read-writeable only if the chip is *not* locked */
+#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \
+&sensor_dev_attr_temp##ix##_offset.dev_attr.attr
+
+#define SENSOR_DEV_ATTR_TEMP(ix) \
+SENSOR_DEV_ATTR_TEMP_LOCK(ix), \
+&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \
+&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \
+&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \
+&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \
+&sensor_dev_attr_temp##ix##_fault.dev_attr.attr
+
+/* These attributes are read-writeable only if the chip is *not* locked */
+#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \
+&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \
+&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \
+&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \
+&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr
+
+#define SENSOR_DEV_ATTR_ZONE(ix) \
+SENSOR_DEV_ATTR_ZONE_LOCK(ix), \
+&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr
+
+#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \
+&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
+&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
+&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
+&sensor_dev_attr_fan##ix##_type.dev_attr.attr
+
+#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \
+&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
+&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
+&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
+&sensor_dev_attr_fan##ix##_max.dev_attr.attr
+
+/* These attributes are read-writeable only if the chip is *not* locked */
+#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \
+&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \
+&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \
+&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \
+&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \
+&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \
+&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr
+
+#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \
+SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \
+&sensor_dev_attr_pwm##ix.dev_attr.attr, \
+&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr
+
+/* These attributes are read-writeable only if the chip is *not* locked */
+#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \
+&sensor_dev_attr_pwm##ix.dev_attr.attr, \
+&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr
+
+#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \
+SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \
+&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr
+
+/* This struct holds all the attributes that are always present and need to be
+ * created unconditionally. The attributes that need modification of their
+ * permissions are created read-only and write permissions are added or removed
+ * on the fly when required */
+static struct attribute *dme1737_attr[] ={
+ /* Voltages */
+ SENSOR_DEV_ATTR_IN(0),
+ SENSOR_DEV_ATTR_IN(1),
+ SENSOR_DEV_ATTR_IN(2),
+ SENSOR_DEV_ATTR_IN(3),
+ SENSOR_DEV_ATTR_IN(4),
+ SENSOR_DEV_ATTR_IN(5),
+ SENSOR_DEV_ATTR_IN(6),
+ /* Temperatures */
+ SENSOR_DEV_ATTR_TEMP(1),
+ SENSOR_DEV_ATTR_TEMP(2),
+ SENSOR_DEV_ATTR_TEMP(3),
+ /* Zones */
+ SENSOR_DEV_ATTR_ZONE(1),
+ SENSOR_DEV_ATTR_ZONE(2),
+ SENSOR_DEV_ATTR_ZONE(3),
+ /* Misc */
+ &dev_attr_vrm.attr,
+ &dev_attr_cpu0_vid.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_group = {
+ .attrs = dme1737_attr,
+};
+
+/* The following structs hold the PWM attributes, some of which are optional.
+ * Their creation depends on the chip configuration which is determined during
+ * module load. */
+static struct attribute *dme1737_attr_pwm1[] = {
+ SENSOR_DEV_ATTR_PWM_1TO3(1),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm2[] = {
+ SENSOR_DEV_ATTR_PWM_1TO3(2),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm3[] = {
+ SENSOR_DEV_ATTR_PWM_1TO3(3),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm5[] = {
+ SENSOR_DEV_ATTR_PWM_5TO6(5),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm6[] = {
+ SENSOR_DEV_ATTR_PWM_5TO6(6),
+ NULL
+};
+
+static const struct attribute_group dme1737_pwm_group[] = {
+ { .attrs = dme1737_attr_pwm1 },
+ { .attrs = dme1737_attr_pwm2 },
+ { .attrs = dme1737_attr_pwm3 },
+ { .attrs = NULL },
+ { .attrs = dme1737_attr_pwm5 },
+ { .attrs = dme1737_attr_pwm6 },
+};
+
+/* The following structs hold the fan attributes, some of which are optional.
+ * Their creation depends on the chip configuration which is determined during
+ * module load. */
+static struct attribute *dme1737_attr_fan1[] = {
+ SENSOR_DEV_ATTR_FAN_1TO4(1),
+ NULL
+};
+static struct attribute *dme1737_attr_fan2[] = {
+ SENSOR_DEV_ATTR_FAN_1TO4(2),
+ NULL
+};
+static struct attribute *dme1737_attr_fan3[] = {
+ SENSOR_DEV_ATTR_FAN_1TO4(3),
+ NULL
+};
+static struct attribute *dme1737_attr_fan4[] = {
+ SENSOR_DEV_ATTR_FAN_1TO4(4),
+ NULL
+};
+static struct attribute *dme1737_attr_fan5[] = {
+ SENSOR_DEV_ATTR_FAN_5TO6(5),
+ NULL
+};
+static struct attribute *dme1737_attr_fan6[] = {
+ SENSOR_DEV_ATTR_FAN_5TO6(6),
+ NULL
+};
+
+static const struct attribute_group dme1737_fan_group[] = {
+ { .attrs = dme1737_attr_fan1 },
+ { .attrs = dme1737_attr_fan2 },
+ { .attrs = dme1737_attr_fan3 },
+ { .attrs = dme1737_attr_fan4 },
+ { .attrs = dme1737_attr_fan5 },
+ { .attrs = dme1737_attr_fan6 },
+};
+
+/* The permissions of all of the following attributes are changed to read-
+ * writeable if the chip is *not* locked. Otherwise they stay read-only. */
+static struct attribute *dme1737_attr_lock[] = {
+ /* Temperatures */
+ SENSOR_DEV_ATTR_TEMP_LOCK(1),
+ SENSOR_DEV_ATTR_TEMP_LOCK(2),
+ SENSOR_DEV_ATTR_TEMP_LOCK(3),
+ /* Zones */
+ SENSOR_DEV_ATTR_ZONE_LOCK(1),
+ SENSOR_DEV_ATTR_ZONE_LOCK(2),
+ SENSOR_DEV_ATTR_ZONE_LOCK(3),
+ NULL
+};
+
+static const struct attribute_group dme1737_lock_group = {
+ .attrs = dme1737_attr_lock,
+};
+
+/* The permissions of the following PWM attributes are changed to read-
+ * writeable if the chip is *not* locked and the respective PWM is available.
+ * Otherwise they stay read-only. */
+static struct attribute *dme1737_attr_pwm1_lock[] = {
+ SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm2_lock[] = {
+ SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm3_lock[] = {
+ SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm5_lock[] = {
+ SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
+ NULL
+};
+static struct attribute *dme1737_attr_pwm6_lock[] = {
+ SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
+ NULL
+};
+
+static const struct attribute_group dme1737_pwm_lock_group[] = {
+ { .attrs = dme1737_attr_pwm1_lock },
+ { .attrs = dme1737_attr_pwm2_lock },
+ { .attrs = dme1737_attr_pwm3_lock },
+ { .attrs = NULL },
+ { .attrs = dme1737_attr_pwm5_lock },
+ { .attrs = dme1737_attr_pwm6_lock },
+};
+
+/* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the
+ * chip is not locked. Otherwise they are read-only. */
+static struct attribute *dme1737_attr_pwm[] = {
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+};
+
+/* ---------------------------------------------------------------------
+ * Super-IO functions
+ * --------------------------------------------------------------------- */
+
+static inline int dme1737_sio_inb(int sio_cip, int reg)
+{
+ outb(reg, sio_cip);
+ return inb(sio_cip + 1);
+}
+
+static inline void dme1737_sio_outb(int sio_cip, int reg, int val)
+{
+ outb(reg, sio_cip);
+ outb(val, sio_cip + 1);
+}
+
+static int dme1737_sio_get_features(int sio_cip, struct i2c_client *client)
+{
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ int err = 0, reg;
+ u16 addr;
+
+ /* Enter configuration mode */
+ outb(0x55, sio_cip);
+
+ /* Check device ID
+ * The DME1737 can return either 0x78 or 0x77 as its device ID. */
+ reg = dme1737_sio_inb(sio_cip, 0x20);
+ if (!(reg == 0x77 || reg == 0x78)) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* Select logical device A (runtime registers) */
+ dme1737_sio_outb(sio_cip, 0x07, 0x0a);
+
+ /* Get the base address of the runtime registers */
+ if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+ dme1737_sio_inb(sio_cip, 0x61))) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* Read the runtime registers to determine which optional features
+ * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
+ * to '10' if the respective feature is enabled. */
+ if ((inb(addr + 0x43) & 0x0c) == 0x08) { /* fan6 */
+ data->has_fan |= (1 << 5);
+ }
+ if ((inb(addr + 0x44) & 0x0c) == 0x08) { /* pwm6 */
+ data->has_pwm |= (1 << 5);
+ }
+ if ((inb(addr + 0x45) & 0x0c) == 0x08) { /* fan5 */
+ data->has_fan |= (1 << 4);
+ }
+ if ((inb(addr + 0x46) & 0x0c) == 0x08) { /* pwm5 */
+ data->has_pwm |= (1 << 4);
+ }
+
+exit:
+ /* Exit configuration mode */
+ outb(0xaa, sio_cip);
+
+ return err;
+}
+
+/* ---------------------------------------------------------------------
+ * Device detection, registration and initialization
+ * --------------------------------------------------------------------- */
+
+static struct i2c_driver dme1737_driver;
+
+static void dme1737_chmod_file(struct i2c_client *client,
+ struct attribute *attr, mode_t mode)
+{
+ if (sysfs_chmod_file(&client->dev.kobj, attr, mode)) {
+ dev_warn(&client->dev, "Failed to change permissions of %s.\n",
+ attr->name);
+ }
+}
+
+static void dme1737_chmod_group(struct i2c_client *client,
+ const struct attribute_group *group,
+ mode_t mode)
+{
+ struct attribute **attr;
+
+ for (attr = group->attrs; *attr; attr++) {
+ dme1737_chmod_file(client, *attr, mode);
+ }
+}
+
+static int dme1737_init_client(struct i2c_client *client)
+{
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ int ix;
+ u8 reg;
+
+ data->config = dme1737_read(client, DME1737_REG_CONFIG);
+ /* Inform if part is not monitoring/started */
+ if (!(data->config & 0x01)) {
+ if (!force_start) {
+ dev_err(&client->dev, "Device is not monitoring. "
+ "Use the force_start load parameter to "
+ "override.\n");
+ return -EFAULT;
+ }
+
+ /* Force monitoring */
+ data->config |= 0x01;
+ dme1737_write(client, DME1737_REG_CONFIG, data->config);
+ }
+ /* Inform if part is not ready */
+ if (!(data->config & 0x04)) {
+ dev_err(&client->dev, "Device is not ready.\n");
+ return -EFAULT;
+ }
+
+ data->config2 = dme1737_read(client, DME1737_REG_CONFIG2);
+ /* Check if optional fan3 input is enabled */
+ if (data->config2 & 0x04) {
+ data->has_fan |= (1 << 2);
+ }
+
+ /* Fan4 and pwm3 are only available if the client's I2C address
+ * is the default 0x2e. Otherwise the I/Os associated with these
+ * functions are used for addr enable/select. */
+ if (client->addr == 0x2e) {
+ data->has_fan |= (1 << 3);
+ data->has_pwm |= (1 << 2);
+ }
+
+ /* Determine if the optional fan[5-6] and/or pwm[5-6] are enabled.
+ * For this, we need to query the runtime registers through the
+ * Super-IO LPC interface. Try both config ports 0x2e and 0x4e. */
+ if (dme1737_sio_get_features(0x2e, client) &&
+ dme1737_sio_get_features(0x4e, client)) {
+ dev_warn(&client->dev, "Failed to query Super-IO for optional "
+ "features.\n");
+ }
+
+ /* Fan1, fan2, pwm1, and pwm2 are always present */
+ data->has_fan |= 0x03;
+ data->has_pwm |= 0x03;
+
+ dev_info(&client->dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, "
+ "fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
+ (data->has_pwm & (1 << 2)) ? "yes" : "no",
+ (data->has_pwm & (1 << 4)) ? "yes" : "no",
+ (data->has_pwm & (1 << 5)) ? "yes" : "no",
+ (data->has_fan & (1 << 2)) ? "yes" : "no",
+ (data->has_fan & (1 << 3)) ? "yes" : "no",
+ (data->has_fan & (1 << 4)) ? "yes" : "no",
+ (data->has_fan & (1 << 5)) ? "yes" : "no");
+
+ reg = dme1737_read(client, DME1737_REG_TACH_PWM);
+ /* Inform if fan-to-pwm mapping differs from the default */
+ if (reg != 0xa4) {
+ dev_warn(&client->dev, "Non-standard fan to pwm mapping: "
+ "fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, "
+ "fan4->pwm%d. Please report to the driver "
+ "maintainer.\n",
+ (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
+ ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1);
+ }
+
+ /* Switch pwm[1-3] to manual mode if they are currently disabled and
+ * set the duty-cycles to 0% (which is identical to the PWMs being
+ * disabled). */
+ if (!(data->config & 0x02)) {
+ for (ix = 0; ix < 3; ix++) {
+ data->pwm_config[ix] = dme1737_read(client,
+ DME1737_REG_PWM_CONFIG(ix));
+ if ((data->has_pwm & (1 << ix)) &&
+ (PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
+ dev_info(&client->dev, "Switching pwm%d to "
+ "manual mode.\n", ix + 1);
+ data->pwm_config[ix] = PWM_EN_TO_REG(1,
+ data->pwm_config[ix]);
+ dme1737_write(client, DME1737_REG_PWM(ix), 0);
+ dme1737_write(client,
+ DME1737_REG_PWM_CONFIG(ix),
+ data->pwm_config[ix]);
+ }
+ }
+ }
+
+ /* Initialize the default PWM auto channels zone (acz) assignments */
+ data->pwm_acz[0] = 1; /* pwm1 -> zone1 */
+ data->pwm_acz[1] = 2; /* pwm2 -> zone2 */
+ data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
+
+ /* Set VRM */
+ data->vrm = vid_which_vrm();
+
+ return 0;
+}
+
+static int dme1737_detect(struct i2c_adapter *adapter, int address,
+ int kind)
+{
+ u8 company, verstep = 0;
+ struct i2c_client *client;
+ struct dme1737_data *data;
+ int ix, err = 0;
+ const char *name;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ goto exit;
+ }
+
+ if (!(data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &dme1737_driver;
+
+ /* A negative kind means that the driver was loaded with no force
+ * parameter (default), so we must identify the chip. */
+ if (kind < 0) {
+ company = dme1737_read(client, DME1737_REG_COMPANY);
+ verstep = dme1737_read(client, DME1737_REG_VERSTEP);
+
+ if (!((company == DME1737_COMPANY_SMSC) &&
+ ((verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP))) {
+ err = -ENODEV;
+ goto exit_kfree;
+ }
+ }
+
+ kind = dme1737;
+ name = "dme1737";
+
+ /* Fill in the remaining client fields and put it into the global
+ * list */
+ strlcpy(client->name, name, I2C_NAME_SIZE);
+ mutex_init(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client))) {
+ goto exit_kfree;
+ }
+
+ /* Initialize the DME1737 chip */
+ if ((err = dme1737_init_client(client))) {
+ goto exit_detach;
+ }
+
+ /* Create standard sysfs attributes */
+ if ((err = sysfs_create_group(&client->dev.kobj, &dme1737_group))) {
+ goto exit_detach;
+ }
+
+ /* Create fan sysfs attributes */
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
+ if (data->has_fan & (1 << ix)) {
+ if ((err = sysfs_create_group(&client->dev.kobj,
+ &dme1737_fan_group[ix]))) {
+ goto exit_remove;
+ }
+ }
+ }
+
+ /* Create PWM sysfs attributes */
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
+ if (data->has_pwm & (1 << ix)) {
+ if ((err = sysfs_create_group(&client->dev.kobj,
+ &dme1737_pwm_group[ix]))) {
+ goto exit_remove;
+ }
+ }
+ }
+
+ /* Inform if the device is locked. Otherwise change the permissions of
+ * selected attributes from read-only to read-writeable. */
+ if (data->config & 0x02) {
+ dev_info(&client->dev, "Device is locked. Some attributes "
+ "will be read-only.\n");
+ } else {
+ /* Change permissions of standard attributes */
+ dme1737_chmod_group(client, &dme1737_lock_group,
+ S_IRUGO | S_IWUSR);
+
+ /* Change permissions of PWM attributes */
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) {
+ if (data->has_pwm & (1 << ix)) {
+ dme1737_chmod_group(client,
+ &dme1737_pwm_lock_group[ix],
+ S_IRUGO | S_IWUSR);
+ }
+ }
+
+ /* Change permissions of pwm[1-3] if in manual mode */
+ for (ix = 0; ix < 3; ix++) {
+ if ((data->has_pwm & (1 << ix)) &&
+ (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
+ dme1737_chmod_file(client,
+ dme1737_attr_pwm[ix],
+ S_IRUGO | S_IWUSR);
+ }
+ }
+ }
+
+ /* Register device */
+ data->class_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove;
+ }
+
+ dev_info(&adapter->dev, "Found a DME1737 chip at 0x%02x "
+ "(rev 0x%02x)\n", client->addr, verstep);
+
+ return 0;
+
+exit_remove:
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
+ if (data->has_fan & (1 << ix)) {
+ sysfs_remove_group(&client->dev.kobj,
+ &dme1737_fan_group[ix]);
+ }
+ }
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
+ if (data->has_pwm & (1 << ix)) {
+ sysfs_remove_group(&client->dev.kobj,
+ &dme1737_pwm_group[ix]);
+ }
+ }
+ sysfs_remove_group(&client->dev.kobj, &dme1737_group);
+exit_detach:
+ i2c_detach_client(client);
+exit_kfree:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int dme1737_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON)) {
+ return 0;
+ }
+
+ return i2c_probe(adapter, &addr_data, dme1737_detect);
+}
+
+static int dme1737_detach_client(struct i2c_client *client)
+{
+ struct dme1737_data *data = i2c_get_clientdata(client);
+ int ix, err;
+
+ hwmon_device_unregister(data->class_dev);
+
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
+ if (data->has_fan & (1 << ix)) {
+ sysfs_remove_group(&client->dev.kobj,
+ &dme1737_fan_group[ix]);
+ }
+ }
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
+ if (data->has_pwm & (1 << ix)) {
+ sysfs_remove_group(&client->dev.kobj,
+ &dme1737_pwm_group[ix]);
+ }
+ }
+ sysfs_remove_group(&client->dev.kobj, &dme1737_group);
+
+ if ((err = i2c_detach_client(client))) {
+ return err;
+ }
+
+ kfree(data);
+ return 0;
+}
+
+static struct i2c_driver dme1737_driver = {
+ .driver = {
+ .name = "dme1737",
+ },
+ .attach_adapter = dme1737_attach_adapter,
+ .detach_client = dme1737_detach_client,
+};
+
+static int __init dme1737_init(void)
+{
+ return i2c_add_driver(&dme1737_driver);
+}
+
+static void __exit dme1737_exit(void)
+{
+ i2c_del_driver(&dme1737_driver);
+}
+
+MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
+MODULE_DESCRIPTION("DME1737 sensors");
+MODULE_LICENSE("GPL");
+
+module_init(dme1737_init);
+module_exit(dme1737_exit);
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index d5ac422d73b..1212d6b7f31 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -27,6 +27,7 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
@@ -52,9 +53,11 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low")
#define DS1621_REG_CONFIG_DONE 0x80
/* The DS1621 registers */
-#define DS1621_REG_TEMP 0xAA /* word, RO */
-#define DS1621_REG_TEMP_MIN 0xA2 /* word, RW */
-#define DS1621_REG_TEMP_MAX 0xA1 /* word, RW */
+static const u8 DS1621_REG_TEMP[3] = {
+ 0xAA, /* input, word, RO */
+ 0xA2, /* min, word, RW */
+ 0xA1, /* max, word, RW */
+};
#define DS1621_REG_CONF 0xAC /* byte, RW */
#define DS1621_COM_START 0xEE /* no data */
#define DS1621_COM_STOP 0x22 /* no data */
@@ -63,10 +66,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low")
#define DS1621_ALARM_TEMP_HIGH 0x40
#define DS1621_ALARM_TEMP_LOW 0x20
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
+/* Conversions */
#define ALARMS_FROM_REG(val) ((val) & \
(DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
@@ -78,7 +78,7 @@ struct ds1621_data {
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- u16 temp, temp_min, temp_max; /* Register values, word */
+ u16 temp[3]; /* Register values, word */
u8 conf; /* Register encoding, combined */
};
@@ -101,7 +101,7 @@ static struct i2c_driver ds1621_driver = {
/* All registers are word-sized, except for the configuration register.
DS1621 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
+ the SMBus standard. */
static int ds1621_read_value(struct i2c_client *client, u8 reg)
{
if (reg == DS1621_REG_CONF)
@@ -110,9 +110,6 @@ static int ds1621_read_value(struct i2c_client *client, u8 reg)
return swab16(i2c_smbus_read_word_data(client, reg));
}
-/* All registers are word-sized, except for the configuration register.
- DS1621 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == DS1621_REG_CONF)
@@ -139,50 +136,61 @@ static void ds1621_init_client(struct i2c_client *client)
i2c_smbus_write_byte(client, DS1621_COM_START);
}
-#define show(value) \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct ds1621_data *data = ds1621_update_client(dev); \
- return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ds1621_data *data = ds1621_update_client(dev);
+ return sprintf(buf, "%d\n",
+ LM75_TEMP_FROM_REG(data->temp[attr->index]));
}
-show(temp);
-show(temp_min);
-show(temp_max);
-
-#define set_temp(suffix, value, reg) \
-static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct ds1621_data *data = ds1621_update_client(dev); \
- u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \
- \
- mutex_lock(&data->update_lock); \
- data->value = val; \
- ds1621_write_value(client, reg, data->value); \
- mutex_unlock(&data->update_lock); \
- return count; \
-}
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds1621_data *data = ds1621_update_client(dev);
+ u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10));
-set_temp(min, temp_min, DS1621_REG_TEMP_MIN);
-set_temp(max, temp_max, DS1621_REG_TEMP_MAX);
+ mutex_lock(&data->update_lock);
+ data->temp[attr->index] = val;
+ ds1621_write_value(client, DS1621_REG_TEMP[attr->index],
+ data->temp[attr->index]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct ds1621_data *data = ds1621_update_client(dev);
return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
}
+static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ds1621_data *data = ds1621_update_client(dev);
+ return sprintf(buf, "%d\n", !!(data->conf & attr->index));
+}
+
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
+ DS1621_ALARM_TEMP_LOW);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+ DS1621_ALARM_TEMP_HIGH);
static struct attribute *ds1621_attributes[] = {
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_min.attr,
- &dev_attr_temp1_max.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
NULL
};
@@ -204,9 +212,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
int kind)
{
int conf, temp;
- struct i2c_client *new_client;
+ struct i2c_client *client;
struct ds1621_data *data;
- int err = 0;
+ int i, err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA
@@ -221,55 +229,44 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
goto exit;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &ds1621_driver;
- new_client->flags = 0;
-
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &ds1621_driver;
/* Now, we do the remaining detection. It is lousy. */
if (kind < 0) {
/* The NVB bit should be low if no EEPROM write has been
requested during the latest 10ms, which is highly
improbable in our case. */
- conf = ds1621_read_value(new_client, DS1621_REG_CONF);
+ conf = ds1621_read_value(client, DS1621_REG_CONF);
if (conf & DS1621_REG_CONFIG_NVB)
goto exit_free;
/* The 7 lowest bits of a temperature should always be 0. */
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP);
- if (temp & 0x007f)
- goto exit_free;
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);
- if (temp & 0x007f)
- goto exit_free;
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);
- if (temp & 0x007f)
- goto exit_free;
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ temp = ds1621_read_value(client, DS1621_REG_TEMP[i]);
+ if (temp & 0x007f)
+ goto exit_free;
+ }
}
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = ds1621;
-
/* Fill in remaining client fields and put it into the global list */
- strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
- data->valid = 0;
+ strlcpy(client->name, "ds1621", I2C_NAME_SIZE);
mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
+ if ((err = i2c_attach_client(client)))
goto exit_free;
/* Initialize the DS1621 chip */
- ds1621_init_client(new_client);
+ ds1621_init_client(client);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group)))
+ if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -278,9 +275,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
return 0;
exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &ds1621_group);
+ sysfs_remove_group(&client->dev.kobj, &ds1621_group);
exit_detach:
- i2c_detach_client(new_client);
+ i2c_detach_client(client);
exit_free:
kfree(data);
exit:
@@ -314,23 +311,21 @@ static struct ds1621_data *ds1621_update_client(struct device *dev)
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
+ int i;
dev_dbg(&client->dev, "Starting ds1621 update\n");
data->conf = ds1621_read_value(client, DS1621_REG_CONF);
- data->temp = ds1621_read_value(client, DS1621_REG_TEMP);
-
- data->temp_min = ds1621_read_value(client,
- DS1621_REG_TEMP_MIN);
- data->temp_max = ds1621_read_value(client,
- DS1621_REG_TEMP_MAX);
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+ data->temp[i] = ds1621_read_value(client,
+ DS1621_REG_TEMP[i]);
/* reset alarms if necessary */
new_conf = data->conf;
- if (data->temp > data->temp_min)
+ if (data->temp[0] > data->temp[1]) /* input > min */
new_conf &= ~DS1621_ALARM_TEMP_LOW;
- if (data->temp < data->temp_max)
+ if (data->temp[0] < data->temp[2]) /* input < max */
new_conf &= ~DS1621_ALARM_TEMP_HIGH;
if (data->conf != new_conf)
ds1621_write_value(client, DS1621_REG_CONF,
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index cdbe309b8fc..6f60715f34f 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -127,6 +127,13 @@ superio_exit(int base)
#define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr))
#define F71805F_REG_TEMP_HYST(nr) (0x55 + 2 * (nr))
#define F71805F_REG_TEMP_MODE 0x01
+/* pwm/fan pwmnr from 0 to 2, auto point apnr from 0 to 2 */
+/* map Fintek numbers to our numbers as follows: 9->0, 5->1, 1->2 */
+#define F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr) \
+ (0xA0 + 0x10 * (pwmnr) + (2 - (apnr)))
+#define F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr) \
+ (0xA4 + 0x10 * (pwmnr) + \
+ 2 * (2 - (apnr)))
#define F71805F_REG_START 0x00
/* status nr from 0 to 2 */
@@ -144,6 +151,11 @@ superio_exit(int base)
* Data structures and manipulation thereof
*/
+struct f71805f_auto_point {
+ u8 temp[3];
+ u16 fan[3];
+};
+
struct f71805f_data {
unsigned short addr;
const char *name;
@@ -170,6 +182,7 @@ struct f71805f_data {
u8 temp_hyst[3];
u8 temp_mode;
unsigned long alarms;
+ struct f71805f_auto_point auto_points[3];
};
struct f71805f_sio_data {
@@ -312,7 +325,7 @@ static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val)
static struct f71805f_data *f71805f_update_device(struct device *dev)
{
struct f71805f_data *data = dev_get_drvdata(dev);
- int nr;
+ int nr, apnr;
mutex_lock(&data->update_lock);
@@ -342,6 +355,18 @@ static struct f71805f_data *f71805f_update_device(struct device *dev)
F71805F_REG_TEMP_HYST(nr));
}
data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE);
+ for (nr = 0; nr < 3; nr++) {
+ for (apnr = 0; apnr < 3; apnr++) {
+ data->auto_points[nr].temp[apnr] =
+ f71805f_read8(data,
+ F71805F_REG_PWM_AUTO_POINT_TEMP(nr,
+ apnr));
+ data->auto_points[nr].fan[apnr] =
+ f71805f_read16(data,
+ F71805F_REG_PWM_AUTO_POINT_FAN(nr,
+ apnr));
+ }
+ }
data->last_limits = jiffies;
}
@@ -705,6 +730,70 @@ static ssize_t set_pwm_freq(struct device *dev, struct device_attribute
return count;
}
+static ssize_t show_pwm_auto_point_temp(struct device *dev,
+ struct device_attribute *devattr,
+ char* buf)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ int pwmnr = attr->nr;
+ int apnr = attr->index;
+
+ return sprintf(buf, "%ld\n",
+ temp_from_reg(data->auto_points[pwmnr].temp[apnr]));
+}
+
+static ssize_t set_pwm_auto_point_temp(struct device *dev,
+ struct device_attribute *devattr,
+ const char* buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ int pwmnr = attr->nr;
+ int apnr = attr->index;
+ unsigned long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->auto_points[pwmnr].temp[apnr] = temp_to_reg(val);
+ f71805f_write8(data, F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr),
+ data->auto_points[pwmnr].temp[apnr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_auto_point_fan(struct device *dev,
+ struct device_attribute *devattr,
+ char* buf)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ int pwmnr = attr->nr;
+ int apnr = attr->index;
+
+ return sprintf(buf, "%ld\n",
+ fan_from_reg(data->auto_points[pwmnr].fan[apnr]));
+}
+
+static ssize_t set_pwm_auto_point_fan(struct device *dev,
+ struct device_attribute *devattr,
+ const char* buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ int pwmnr = attr->nr;
+ int apnr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->auto_points[pwmnr].fan[apnr] = fan_to_reg(val);
+ f71805f_write16(data, F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr),
+ data->auto_points[pwmnr].fan[apnr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
char *buf)
{
@@ -932,6 +1021,63 @@ static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR,
show_pwm_freq, set_pwm_freq, 2);
static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 0, 2);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 0, 2);
+
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 1, 2);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 1, 2);
+
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_temp, set_pwm_auto_point_temp,
+ 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_fan, S_IRUGO | S_IWUSR,
+ show_pwm_auto_point_fan, set_pwm_auto_point_fan,
+ 2, 2);
+
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
@@ -1014,6 +1160,25 @@ static struct attribute *f71805f_attributes[] = {
&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point3_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_fan.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point3_fan.dev_attr.attr,
+
&sensor_dev_attr_in0_alarm.dev_attr.attr,
&sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in2_alarm.dev_attr.attr,
@@ -1242,12 +1407,12 @@ static int __devexit f71805f_remove(struct platform_device *pdev)
struct resource *res;
int i;
- platform_set_drvdata(pdev, NULL);
hwmon_device_unregister(data->class_dev);
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
for (i = 0; i < 4; i++)
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -1290,15 +1455,12 @@ static int __init f71805f_device_add(unsigned short address,
goto exit_device_put;
}
- pdev->dev.platform_data = kmalloc(sizeof(struct f71805f_sio_data),
- GFP_KERNEL);
- if (!pdev->dev.platform_data) {
- err = -ENOMEM;
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct f71805f_sio_data));
+ if (err) {
printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
goto exit_device_put;
}
- memcpy(pdev->dev.platform_data, sio_data,
- sizeof(struct f71805f_sio_data));
err = platform_device_add(pdev);
if (err) {
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 62afc63708a..eff6036e15c 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -6,6 +6,7 @@
IT8712F Super I/O chip w/LPC interface
IT8716F Super I/O chip w/LPC interface
IT8718F Super I/O chip w/LPC interface
+ IT8726F Super I/O chip w/LPC interface
Sis950 A clone of the IT8705F
Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com>
@@ -30,8 +31,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
@@ -40,10 +40,12 @@
#include <linux/sysfs.h>
#include <asm/io.h>
+#define DRVNAME "it87"
-static unsigned short isa_address;
enum chips { it87, it8712, it8716, it8718 };
+static struct platform_device *pdev;
+
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
#define VAL 0x2f /* The value to read/write */
@@ -97,6 +99,7 @@ superio_exit(void)
#define IT8705F_DEVID 0x8705
#define IT8716F_DEVID 0x8716
#define IT8718F_DEVID 0x8718
+#define IT8726F_DEVID 0x8726
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
@@ -110,10 +113,6 @@ static int update_vbat;
/* Not all BIOSes properly configure the PWM registers */
static int fix_pwm_polarity;
-/* Values read from Super-I/O config space */
-static u16 chip_type;
-static u8 vid_value;
-
/* Many IT87 constants specified below */
/* Length of ISA address segment */
@@ -214,13 +213,20 @@ static const unsigned int pwm_freq[8] = {
};
+struct it87_sio_data {
+ enum chips type;
+ /* Values read from Super-I/O config space */
+ u8 vid_value;
+};
+
/* For each registered chip, we need to keep some data in memory.
The structure is dynamically allocated. */
struct it87_data {
- struct i2c_client client;
struct class_device *class_dev;
enum chips type;
+ unsigned short addr;
+ const char *name;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -245,26 +251,25 @@ struct it87_data {
};
-static int it87_detect(struct i2c_adapter *adapter);
-static int it87_detach_client(struct i2c_client *client);
+static int it87_probe(struct platform_device *pdev);
+static int it87_remove(struct platform_device *pdev);
-static int it87_read_value(struct i2c_client *client, u8 reg);
-static void it87_write_value(struct i2c_client *client, u8 reg, u8 value);
+static int it87_read_value(struct it87_data *data, u8 reg);
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
static struct it87_data *it87_update_device(struct device *dev);
-static int it87_check_pwm(struct i2c_client *client);
-static void it87_init_client(struct i2c_client *client, struct it87_data *data);
+static int it87_check_pwm(struct device *dev);
+static void it87_init_device(struct platform_device *pdev);
-static struct i2c_driver it87_isa_driver = {
+static struct platform_driver it87_driver = {
.driver = {
.owner = THIS_MODULE,
- .name = "it87-isa",
+ .name = DRVNAME,
},
- .attach_adapter = it87_detect,
- .detach_client = it87_detach_client,
+ .probe = it87_probe,
+ .remove = __devexit_p(it87_remove),
};
-
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -301,13 +306,12 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
- it87_write_value(client, IT87_REG_VIN_MIN(nr),
+ it87_write_value(data, IT87_REG_VIN_MIN(nr),
data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -318,13 +322,12 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
- it87_write_value(client, IT87_REG_VIN_MAX(nr),
+ it87_write_value(data, IT87_REG_VIN_MAX(nr),
data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -392,13 +395,12 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_high[nr] = TEMP_TO_REG(val);
- it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -408,13 +410,12 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_low[nr] = TEMP_TO_REG(val);
- it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+ it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -451,8 +452,7 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -468,7 +468,7 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
mutex_unlock(&data->update_lock);
return -EINVAL;
}
- it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+ it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
mutex_unlock(&data->update_lock);
return count;
}
@@ -542,13 +542,12 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
u8 reg;
mutex_lock(&data->update_lock);
- reg = it87_read_value(client, IT87_REG_FAN_DIV);
+ reg = it87_read_value(data, IT87_REG_FAN_DIV);
switch (nr) {
case 0: data->fan_div[nr] = reg & 0x07; break;
case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
@@ -556,7 +555,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
}
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -566,14 +565,13 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
int min;
u8 old;
mutex_lock(&data->update_lock);
- old = it87_read_value(client, IT87_REG_FAN_DIV);
+ old = it87_read_value(data, IT87_REG_FAN_DIV);
/* Save fan min limit */
min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
@@ -594,11 +592,11 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
val |= (data->fan_div[1] & 0x07) << 3;
if (data->fan_div[2] == 3)
val |= 0x1 << 6;
- it87_write_value(client, IT87_REG_FAN_DIV, val);
+ it87_write_value(data, IT87_REG_FAN_DIV, val);
/* Restore fan min limit */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -609,8 +607,7 @@ static ssize_t set_pwm_enable(struct device *dev,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -618,17 +615,17 @@ static ssize_t set_pwm_enable(struct device *dev,
if (val == 0) {
int tmp;
/* make sure the fan is on when in on/off mode */
- tmp = it87_read_value(client, IT87_REG_FAN_CTL);
- it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr));
+ tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+ it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
/* set on/off mode */
data->fan_main_ctrl &= ~(1 << nr);
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
} else if (val == 1) {
/* set SmartGuardian mode */
data->fan_main_ctrl |= (1 << nr);
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
/* set saved pwm value, clear FAN_CTLX PWM mode bit */
- it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
} else {
mutex_unlock(&data->update_lock);
return -EINVAL;
@@ -643,8 +640,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
if (val < 0 || val > 255)
@@ -653,15 +649,14 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->update_lock);
data->manual_pwm_ctl[nr] = val;
if (data->fan_main_ctrl & (1 << nr))
- it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_pwm_freq(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
int i;
@@ -672,9 +667,9 @@ static ssize_t set_pwm_freq(struct device *dev,
}
mutex_lock(&data->update_lock);
- data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL) & 0x8f;
+ data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
data->fan_ctl |= i << 4;
- it87_write_value(client, IT87_REG_FAN_CTL, data->fan_ctl);
+ it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
mutex_unlock(&data->update_lock);
return count;
@@ -729,15 +724,14 @@ static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN16_TO_REG(val);
- it87_write_value(client, IT87_REG_FAN_MIN(nr),
+ it87_write_value(data, IT87_REG_FAN_MIN(nr),
data->fan_min[nr] & 0xff);
- it87_write_value(client, IT87_REG_FANX_MIN(nr),
+ it87_write_value(data, IT87_REG_FANX_MIN(nr),
data->fan_min[nr] >> 8);
mutex_unlock(&data->update_lock);
return count;
@@ -775,8 +769,7 @@ show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
static ssize_t
store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
u32 val;
val = simple_strtoul(buf, NULL, 10);
@@ -794,6 +787,14 @@ show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
static struct attribute *it87_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
@@ -835,6 +836,7 @@ static struct attribute *it87_attributes[] = {
&sensor_dev_attr_temp3_type.dev_attr.attr,
&dev_attr_alarms.attr,
+ &dev_attr_name.attr,
NULL
};
@@ -877,17 +879,36 @@ static const struct attribute_group it87_group_opt = {
};
/* SuperIO detection - will change isa_address if a chip is found */
-static int __init it87_find(unsigned short *address)
+static int __init it87_find(unsigned short *address,
+ struct it87_sio_data *sio_data)
{
int err = -ENODEV;
+ u16 chip_type;
superio_enter();
chip_type = superio_inw(DEVID);
- if (chip_type != IT8712F_DEVID
- && chip_type != IT8716F_DEVID
- && chip_type != IT8718F_DEVID
- && chip_type != IT8705F_DEVID)
- goto exit;
+
+ switch (chip_type) {
+ case IT8705F_DEVID:
+ sio_data->type = it87;
+ break;
+ case IT8712F_DEVID:
+ sio_data->type = it8712;
+ break;
+ case IT8716F_DEVID:
+ case IT8726F_DEVID:
+ sio_data->type = it8716;
+ break;
+ case IT8718F_DEVID:
+ sio_data->type = it8718;
+ break;
+ case 0xffff: /* No device at all */
+ goto exit;
+ default:
+ pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
+ chip_type);
+ goto exit;
+ }
superio_select(PME);
if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
@@ -911,7 +932,7 @@ static int __init it87_find(unsigned short *address)
superio_select(GPIO);
if (chip_type == it8718)
- vid_value = superio_inb(IT87_SIO_VID_REG);
+ sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
if (reg & (1 << 0))
@@ -925,18 +946,26 @@ exit:
return err;
}
-/* This function is called by i2c_probe */
-static int it87_detect(struct i2c_adapter *adapter)
+static int __devinit it87_probe(struct platform_device *pdev)
{
- struct i2c_client *new_client;
struct it87_data *data;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct it87_sio_data *sio_data = dev->platform_data;
int err = 0;
- const char *name;
int enable_pwm_interface;
-
- /* Reserve the ISA region */
- if (!request_region(isa_address, IT87_EXTENT,
- it87_isa_driver.driver.name)){
+ static const char *names[] = {
+ "it87",
+ "it8712",
+ "it8716",
+ "it8718",
+ };
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, IT87_EXTENT, DRVNAME)) {
+ dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)(res->start + IT87_EXTENT - 1));
err = -EBUSY;
goto ERROR0;
}
@@ -946,129 +975,104 @@ static int it87_detect(struct i2c_adapter *adapter)
goto ERROR1;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = isa_address;
- new_client->adapter = adapter;
- new_client->driver = &it87_isa_driver;
+ data->addr = res->start;
+ data->type = sio_data->type;
+ data->name = names[sio_data->type];
/* Now, we do the remaining detection. */
- if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
- || it87_read_value(new_client, IT87_REG_CHIPID) != 0x90) {
+ if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
+ || it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
err = -ENODEV;
goto ERROR2;
}
- /* Determine the chip type. */
- switch (chip_type) {
- case IT8712F_DEVID:
- data->type = it8712;
- name = "it8712";
- break;
- case IT8716F_DEVID:
- data->type = it8716;
- name = "it8716";
- break;
- case IT8718F_DEVID:
- data->type = it8718;
- name = "it8718";
- break;
- default:
- data->type = it87;
- name = "it87";
- }
+ platform_set_drvdata(pdev, data);
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto ERROR2;
-
/* Check PWM configuration */
- enable_pwm_interface = it87_check_pwm(new_client);
+ enable_pwm_interface = it87_check_pwm(dev);
/* Initialize the IT87 chip */
- it87_init_client(new_client, data);
+ it87_init_device(pdev);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &it87_group)))
- goto ERROR3;
+ if ((err = sysfs_create_group(&dev->kobj, &it87_group)))
+ goto ERROR2;
/* Do not create fan files for disabled fans */
if (data->type == it8716 || data->type == it8718) {
/* 16-bit tachometers */
if (data->has_fan & (1 << 0)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan1_input16.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan1_min16.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 1)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan2_input16.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan2_min16.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 2)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan3_input16.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan3_min16.dev_attr)))
goto ERROR4;
}
} else {
/* 8-bit tachometers with clock divider */
if (data->has_fan & (1 << 0)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan1_input.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan1_min.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan1_div.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 1)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan2_input.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan2_min.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan2_div.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 2)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan3_input.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan3_min.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan3_div.dev_attr)))
goto ERROR4;
}
}
if (enable_pwm_interface) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_pwm1_enable.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_pwm2_enable.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_pwm3_enable.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_pwm1.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_pwm2.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_pwm3.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&dev_attr_pwm1_freq))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&dev_attr_pwm2_freq))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&dev_attr_pwm3_freq)))
goto ERROR4;
}
@@ -1077,15 +1081,15 @@ static int it87_detect(struct i2c_adapter *adapter)
|| data->type == it8718) {
data->vrm = vid_which_vrm();
/* VID reading from Super-I/O config space if available */
- data->vid = vid_value;
- if ((err = device_create_file(&new_client->dev,
+ data->vid = sio_data->vid_value;
+ if ((err = device_create_file(dev,
&dev_attr_vrm))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&dev_attr_cpu0_vid)))
goto ERROR4;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR4;
@@ -1094,31 +1098,27 @@ static int it87_detect(struct i2c_adapter *adapter)
return 0;
ERROR4:
- sysfs_remove_group(&new_client->dev.kobj, &it87_group);
- sysfs_remove_group(&new_client->dev.kobj, &it87_group_opt);
-ERROR3:
- i2c_detach_client(new_client);
+ sysfs_remove_group(&dev->kobj, &it87_group);
+ sysfs_remove_group(&dev->kobj, &it87_group_opt);
ERROR2:
+ platform_set_drvdata(pdev, NULL);
kfree(data);
ERROR1:
- release_region(isa_address, IT87_EXTENT);
+ release_region(res->start, IT87_EXTENT);
ERROR0:
return err;
}
-static int it87_detach_client(struct i2c_client *client)
+static int __devexit it87_remove(struct platform_device *pdev)
{
- struct it87_data *data = i2c_get_clientdata(client);
- int err;
+ struct it87_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->class_dev);
- sysfs_remove_group(&client->dev.kobj, &it87_group);
- sysfs_remove_group(&client->dev.kobj, &it87_group_opt);
+ sysfs_remove_group(&pdev->dev.kobj, &it87_group);
+ sysfs_remove_group(&pdev->dev.kobj, &it87_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
- release_region(client->addr, IT87_EXTENT);
+ release_region(data->addr, IT87_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
@@ -1127,28 +1127,29 @@ static int it87_detach_client(struct i2c_client *client)
/* Must be called with data->update_lock held, except during initialization.
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
-static int it87_read_value(struct i2c_client *client, u8 reg)
+static int it87_read_value(struct it87_data *data, u8 reg)
{
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- return inb_p(client->addr + IT87_DATA_REG_OFFSET);
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ return inb_p(data->addr + IT87_DATA_REG_OFFSET);
}
/* Must be called with data->update_lock held, except during initialization.
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
-static void it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
{
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
}
/* Return 1 if and only if the PWM interface is safe to use */
-static int it87_check_pwm(struct i2c_client *client)
+static int __devinit it87_check_pwm(struct device *dev)
{
+ struct it87_data *data = dev_get_drvdata(dev);
/* Some BIOSes fail to correctly configure the IT87 fans. All fans off
* and polarity set to active low is sign that this is the case so we
* disable pwm control to protect the user. */
- int tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+ int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
if ((tmp & 0x87) == 0) {
if (fix_pwm_polarity) {
/* The user asks us to attempt a chip reconfiguration.
@@ -1158,7 +1159,7 @@ static int it87_check_pwm(struct i2c_client *client)
u8 pwm[3];
for (i = 0; i < 3; i++)
- pwm[i] = it87_read_value(client,
+ pwm[i] = it87_read_value(data,
IT87_REG_PWM(i));
/* If any fan is in automatic pwm mode, the polarity
@@ -1166,26 +1167,26 @@ static int it87_check_pwm(struct i2c_client *client)
* better don't change anything (but still disable the
* PWM interface). */
if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
- dev_info(&client->dev, "Reconfiguring PWM to "
+ dev_info(dev, "Reconfiguring PWM to "
"active high polarity\n");
- it87_write_value(client, IT87_REG_FAN_CTL,
+ it87_write_value(data, IT87_REG_FAN_CTL,
tmp | 0x87);
for (i = 0; i < 3; i++)
- it87_write_value(client,
+ it87_write_value(data,
IT87_REG_PWM(i),
0x7f & ~pwm[i]);
return 1;
}
- dev_info(&client->dev, "PWM configuration is "
+ dev_info(dev, "PWM configuration is "
"too broken to be fixed\n");
}
- dev_info(&client->dev, "Detected broken BIOS "
+ dev_info(dev, "Detected broken BIOS "
"defaults, disabling PWM interface\n");
return 0;
} else if (fix_pwm_polarity) {
- dev_info(&client->dev, "PWM configuration looks "
+ dev_info(dev, "PWM configuration looks "
"sane, won't touch\n");
}
@@ -1193,8 +1194,9 @@ static int it87_check_pwm(struct i2c_client *client)
}
/* Called when we have found a new IT87. */
-static void it87_init_client(struct i2c_client *client, struct it87_data *data)
+static void __devinit it87_init_device(struct platform_device *pdev)
{
+ struct it87_data *data = platform_get_drvdata(pdev);
int tmp, i;
/* initialize to sane defaults:
@@ -1214,48 +1216,48 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data)
* means -1 degree C, which surprisingly doesn't trigger an alarm,
* but is still confusing, so change to 127 degrees C. */
for (i = 0; i < 8; i++) {
- tmp = it87_read_value(client, IT87_REG_VIN_MIN(i));
+ tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
if (tmp == 0xff)
- it87_write_value(client, IT87_REG_VIN_MIN(i), 0);
+ it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
}
for (i = 0; i < 3; i++) {
- tmp = it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+ tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
if (tmp == 0xff)
- it87_write_value(client, IT87_REG_TEMP_HIGH(i), 127);
+ it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
}
/* Check if temperature channnels are reset manually or by some reason */
- tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+ tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE);
if ((tmp & 0x3f) == 0) {
/* Temp1,Temp3=thermistor; Temp2=thermal diode */
tmp = (tmp & 0xc0) | 0x2a;
- it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+ it87_write_value(data, IT87_REG_TEMP_ENABLE, tmp);
}
data->sensor = tmp;
/* Check if voltage monitors are reset manually or by some reason */
- tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+ tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
if ((tmp & 0xff) == 0) {
/* Enable all voltage monitors */
- it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+ it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
}
/* Check if tachometers are reset manually or by some reason */
- data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+ data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
if ((data->fan_main_ctrl & 0x70) == 0) {
/* Enable all fan tachometers */
data->fan_main_ctrl |= 0x70;
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
}
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
/* Set tachometers to 16-bit mode if needed */
if (data->type == it8716 || data->type == it8718) {
- tmp = it87_read_value(client, IT87_REG_FAN_16BIT);
+ tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
if (~tmp & 0x07 & data->has_fan) {
- dev_dbg(&client->dev,
+ dev_dbg(&pdev->dev,
"Setting fan1-3 to 16-bit mode\n");
- it87_write_value(client, IT87_REG_FAN_16BIT,
+ it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
}
@@ -1265,7 +1267,7 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data)
for (i = 0; i < 3; i++) {
if (data->fan_main_ctrl & (1 << i)) {
/* pwm mode */
- tmp = it87_read_value(client, IT87_REG_PWM(i));
+ tmp = it87_read_value(data, IT87_REG_PWM(i));
if (tmp & 0x80) {
/* automatic pwm - not yet implemented, but
* leave the settings made by the BIOS alone
@@ -1279,15 +1281,14 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data)
}
/* Start monitoring */
- it87_write_value(client, IT87_REG_CONFIG,
- (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
+ it87_write_value(data, IT87_REG_CONFIG,
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
| (update_vbat ? 0x41 : 0x01));
}
static struct it87_data *it87_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int i;
mutex_lock(&data->update_lock);
@@ -1298,20 +1299,20 @@ static struct it87_data *it87_update_device(struct device *dev)
if (update_vbat) {
/* Cleared after each update, so reenable. Value
returned by this read will be previous value */
- it87_write_value(client, IT87_REG_CONFIG,
- it87_read_value(client, IT87_REG_CONFIG) | 0x40);
+ it87_write_value(data, IT87_REG_CONFIG,
+ it87_read_value(data, IT87_REG_CONFIG) | 0x40);
}
for (i = 0; i <= 7; i++) {
data->in[i] =
- it87_read_value(client, IT87_REG_VIN(i));
+ it87_read_value(data, IT87_REG_VIN(i));
data->in_min[i] =
- it87_read_value(client, IT87_REG_VIN_MIN(i));
+ it87_read_value(data, IT87_REG_VIN_MIN(i));
data->in_max[i] =
- it87_read_value(client, IT87_REG_VIN_MAX(i));
+ it87_read_value(data, IT87_REG_VIN_MAX(i));
}
/* in8 (battery) has no limit registers */
data->in[8] =
- it87_read_value(client, IT87_REG_VIN(8));
+ it87_read_value(data, IT87_REG_VIN(8));
for (i = 0; i < 3; i++) {
/* Skip disabled fans */
@@ -1319,46 +1320,47 @@ static struct it87_data *it87_update_device(struct device *dev)
continue;
data->fan_min[i] =
- it87_read_value(client, IT87_REG_FAN_MIN(i));
- data->fan[i] = it87_read_value(client,
+ it87_read_value(data, IT87_REG_FAN_MIN(i));
+ data->fan[i] = it87_read_value(data,
IT87_REG_FAN(i));
/* Add high byte if in 16-bit mode */
if (data->type == it8716 || data->type == it8718) {
- data->fan[i] |= it87_read_value(client,
+ data->fan[i] |= it87_read_value(data,
IT87_REG_FANX(i)) << 8;
- data->fan_min[i] |= it87_read_value(client,
+ data->fan_min[i] |= it87_read_value(data,
IT87_REG_FANX_MIN(i)) << 8;
}
}
for (i = 0; i < 3; i++) {
data->temp[i] =
- it87_read_value(client, IT87_REG_TEMP(i));
+ it87_read_value(data, IT87_REG_TEMP(i));
data->temp_high[i] =
- it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+ it87_read_value(data, IT87_REG_TEMP_HIGH(i));
data->temp_low[i] =
- it87_read_value(client, IT87_REG_TEMP_LOW(i));
+ it87_read_value(data, IT87_REG_TEMP_LOW(i));
}
/* Newer chips don't have clock dividers */
if ((data->has_fan & 0x07) && data->type != it8716
&& data->type != it8718) {
- i = it87_read_value(client, IT87_REG_FAN_DIV);
+ i = it87_read_value(data, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
data->fan_div[2] = (i & 0x40) ? 3 : 1;
}
data->alarms =
- it87_read_value(client, IT87_REG_ALARM1) |
- (it87_read_value(client, IT87_REG_ALARM2) << 8) |
- (it87_read_value(client, IT87_REG_ALARM3) << 16);
- data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
- data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL);
-
- data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+ it87_read_value(data, IT87_REG_ALARM1) |
+ (it87_read_value(data, IT87_REG_ALARM2) << 8) |
+ (it87_read_value(data, IT87_REG_ALARM3) << 16);
+ data->fan_main_ctrl = it87_read_value(data,
+ IT87_REG_FAN_MAIN_CTRL);
+ data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
+
+ data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
/* The 8705 does not have VID capability */
if (data->type == it8712 || data->type == it8716) {
- data->vid = it87_read_value(client, IT87_REG_VID);
+ data->vid = it87_read_value(data, IT87_REG_VID);
/* The older IT8712F revisions had only 5 VID pins,
but we assume it is always safe to read 6 bits. */
data->vid &= 0x3f;
@@ -1372,24 +1374,85 @@ static struct it87_data *it87_update_device(struct device *dev)
return data;
}
+static int __init it87_device_add(unsigned short address,
+ const struct it87_sio_data *sio_data)
+{
+ struct resource res = {
+ .start = address ,
+ .end = address + IT87_EXTENT - 1,
+ .name = DRVNAME,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct it87_sio_data));
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __init sm_it87_init(void)
{
- int res;
+ int err;
+ unsigned short isa_address=0;
+ struct it87_sio_data sio_data;
+
+ err = it87_find(&isa_address, &sio_data);
+ if (err)
+ return err;
+ err = platform_driver_register(&it87_driver);
+ if (err)
+ return err;
- if ((res = it87_find(&isa_address)))
- return res;
- return i2c_isa_add_driver(&it87_isa_driver);
+ err = it87_device_add(isa_address, &sio_data);
+ if (err){
+ platform_driver_unregister(&it87_driver);
+ return err;
+ }
+
+ return 0;
}
static void __exit sm_it87_exit(void)
{
- i2c_isa_del_driver(&it87_isa_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&it87_driver);
}
MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>, "
"Jean Delvare <khali@linux-fr.org>");
-MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F, SiS950 driver");
+MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8726F, SiS950 driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
module_param(fix_pwm_polarity, bool, 0);
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index d69f3cf0712..2162d69a8c0 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -364,7 +364,7 @@ static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
/* Individual alarm files */
static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
@@ -383,7 +383,7 @@ static struct attribute *lm63_attributes[] = {
&dev_attr_temp2_crit_hyst.attr,
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index 7eaae3834e1..275d392eca6 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -96,6 +96,10 @@ static int __devinit lm70_probe(struct spi_device *spi)
struct lm70 *p_lm70;
int status;
+ /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */
+ if ((spi->mode & (SPI_CPOL|SPI_CPHA)) || !(spi->mode & SPI_3WIRE))
+ return -EINVAL;
+
p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL);
if (!p_lm70)
return -ENOMEM;
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index feb87b41e98..654c0f73464 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -223,14 +223,14 @@ static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8);
/* Individual alarm files */
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_input_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8);
static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
-static SENSOR_DEVICE_ATTR(temp4_input_fault, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, 10);
static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 12);
-static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 15);
/* Raw alarm file for compatibility */
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
@@ -245,7 +245,7 @@ static struct attribute *lm83_attributes[] = {
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
@@ -266,9 +266,9 @@ static struct attribute *lm83_attributes_opt[] = {
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
NULL
};
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 6882ce75fee..48833fff492 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -43,6 +43,13 @@
* variants. The extra address and features of the MAX6659 are not
* supported by this driver.
*
+ * This driver also supports the MAX6680 and MAX6681, two other sensor
+ * chips made by Maxim. These are quite similar to the other Maxim
+ * chips. Complete datasheet can be obtained at:
+ * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+ * The MAX6680 and MAX6681 only differ in the pinout so they can be
+ * treated identically.
+ *
* This driver also supports the ADT7461 chip from Analog Devices but
* only in its "compatability mode". If an ADT7461 chip is found but
* is configured in non-compatible mode (where its temperature
@@ -84,20 +91,25 @@
/*
* Addresses to scan
* Address is fully defined internally and cannot be changed except for
- * MAX6659.
+ * MAX6659, MAX6680 and MAX6681.
* LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658
* have address 0x4c.
* ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d.
* MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
+ * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+ * 0x4c, 0x4d or 0x4e.
*/
-static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
+ 0x29, 0x2a, 0x2b,
+ 0x4c, 0x4d, 0x4e,
+ I2C_CLIENT_END };
/*
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
+I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680);
/*
* The LM90 registers
@@ -359,7 +371,7 @@ static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
/* Individual alarm files */
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5);
@@ -381,7 +393,7 @@ static struct attribute *lm90_attributes[] = {
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
@@ -429,7 +441,7 @@ static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec);
*/
/* The ADM1032 supports PEC but not on write byte transactions, so we need
- to explicitely ask for a transaction without PEC. */
+ to explicitly ask for a transaction without PEC. */
static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter, client->addr,
@@ -525,7 +537,8 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
&reg_convrate) < 0)
goto exit_free;
- if (man_id == 0x01) { /* National Semiconductor */
+ if ((address == 0x4C || address == 0x4D)
+ && man_id == 0x01) { /* National Semiconductor */
u8 reg_config2;
if (lm90_read_reg(new_client, LM90_REG_R_CONFIG2,
@@ -548,7 +561,8 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
}
}
} else
- if (man_id == 0x41) { /* Analog Devices */
+ if ((address == 0x4C || address == 0x4D)
+ && man_id == 0x41) { /* Analog Devices */
if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
&& (reg_config1 & 0x3F) == 0x00
&& reg_convrate <= 0x0A) {
@@ -562,18 +576,30 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
} else
if (man_id == 0x4D) { /* Maxim */
/*
- * The Maxim variants do NOT have a chip_id register.
- * Reading from that address will return the last read
- * value, which in our case is those of the man_id
- * register. Likewise, the config1 register seems to
- * lack a low nibble, so the value will be those of the
- * previous read, so in our case those of the man_id
- * register.
+ * The MAX6657, MAX6658 and MAX6659 do NOT have a
+ * chip_id register. Reading from that address will
+ * return the last read value, which in our case is
+ * those of the man_id register. Likewise, the config1
+ * register seems to lack a low nibble, so the value
+ * will be those of the previous read, so in our case
+ * those of the man_id register.
*/
if (chip_id == man_id
+ && (address == 0x4F || address == 0x4D)
&& (reg_config1 & 0x1F) == (man_id & 0x0F)
&& reg_convrate <= 0x09) {
kind = max6657;
+ } else
+ /* The chip_id register of the MAX6680 and MAX6681
+ * holds the revision of the chip.
+ * the lowest bit of the config1 register is unused
+ * and should return zero when read, so should the
+ * second to last bit of config1 (software reset)
+ */
+ if (chip_id == 0x01
+ && (reg_config1 & 0x03) == 0x00
+ && reg_convrate <= 0x07) {
+ kind = max6680;
}
}
@@ -599,6 +625,8 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
name = "lm86";
} else if (kind == max6657) {
name = "max6657";
+ } else if (kind == max6680) {
+ name = "max6680";
} else if (kind == adt7461) {
name = "adt7461";
}
@@ -646,7 +674,8 @@ exit:
static void lm90_init_client(struct i2c_client *client)
{
- u8 config;
+ u8 config, config_orig;
+ struct lm90_data *data = i2c_get_clientdata(client);
/*
* Start the conversions.
@@ -657,9 +686,20 @@ static void lm90_init_client(struct i2c_client *client)
dev_warn(&client->dev, "Initialization failed!\n");
return;
}
- if (config & 0x40)
- i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
- config & 0xBF); /* run */
+ config_orig = config;
+
+ /*
+ * Put MAX6680/MAX8881 into extended resolution (bit 0x10,
+ * 0.125 degree resolution) and range (0x08, extend range
+ * to -64 degree) mode for the remote temperature sensor.
+ */
+ if (data->kind == max6680) {
+ config |= 0x18;
+ }
+
+ config &= 0xBF; /* run */
+ if (config != config_orig) /* Only write if changed */
+ i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
}
static int lm90_detach_client(struct i2c_client *client)
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
new file mode 100644
index 00000000000..23edf4fe422
--- /dev/null
+++ b/drivers/hwmon/lm93.c
@@ -0,0 +1,2655 @@
+/*
+ lm93.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
+
+ Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com>
+ Copyright (c) 2004 Utilitek Systems, Inc.
+
+ derived in part from lm78.c:
+ Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+
+ derived in part from lm85.c:
+ Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
+ Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
+
+ derived in part from w83l785ts.c:
+ Copyright (c) 2003-2004 Jean Delvare <khali@linux-fr.org>
+
+ Ported to Linux 2.6 by Eric J. Bowersox <ericb@aspsys.com>
+ Copyright (c) 2005 Aspen Systems, Inc.
+
+ Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
+ Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
+
+ Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+ Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+/* LM93 REGISTER ADDRESSES */
+
+/* miscellaneous */
+#define LM93_REG_MFR_ID 0x3e
+#define LM93_REG_VER 0x3f
+#define LM93_REG_STATUS_CONTROL 0xe2
+#define LM93_REG_CONFIG 0xe3
+#define LM93_REG_SLEEP_CONTROL 0xe4
+
+/* alarm values start here */
+#define LM93_REG_HOST_ERROR_1 0x48
+
+/* voltage inputs: in1-in16 (nr => 0-15) */
+#define LM93_REG_IN(nr) (0x56 + (nr))
+#define LM93_REG_IN_MIN(nr) (0x90 + (nr) * 2)
+#define LM93_REG_IN_MAX(nr) (0x91 + (nr) * 2)
+
+/* temperature inputs: temp1-temp4 (nr => 0-3) */
+#define LM93_REG_TEMP(nr) (0x50 + (nr))
+#define LM93_REG_TEMP_MIN(nr) (0x78 + (nr) * 2)
+#define LM93_REG_TEMP_MAX(nr) (0x79 + (nr) * 2)
+
+/* temp[1-4]_auto_boost (nr => 0-3) */
+#define LM93_REG_BOOST(nr) (0x80 + (nr))
+
+/* #PROCHOT inputs: prochot1-prochot2 (nr => 0-1) */
+#define LM93_REG_PROCHOT_CUR(nr) (0x67 + (nr) * 2)
+#define LM93_REG_PROCHOT_AVG(nr) (0x68 + (nr) * 2)
+#define LM93_REG_PROCHOT_MAX(nr) (0xb0 + (nr))
+
+/* fan tach inputs: fan1-fan4 (nr => 0-3) */
+#define LM93_REG_FAN(nr) (0x6e + (nr) * 2)
+#define LM93_REG_FAN_MIN(nr) (0xb4 + (nr) * 2)
+
+/* pwm outputs: pwm1-pwm2 (nr => 0-1, reg => 0-3) */
+#define LM93_REG_PWM_CTL(nr,reg) (0xc8 + (reg) + (nr) * 4)
+#define LM93_PWM_CTL1 0x0
+#define LM93_PWM_CTL2 0x1
+#define LM93_PWM_CTL3 0x2
+#define LM93_PWM_CTL4 0x3
+
+/* GPIO input state */
+#define LM93_REG_GPI 0x6b
+
+/* vid inputs: vid1-vid2 (nr => 0-1) */
+#define LM93_REG_VID(nr) (0x6c + (nr))
+
+/* vccp1 & vccp2: VID relative inputs (nr => 0-1) */
+#define LM93_REG_VCCP_LIMIT_OFF(nr) (0xb2 + (nr))
+
+/* temp[1-4]_auto_boost_hyst */
+#define LM93_REG_BOOST_HYST_12 0xc0
+#define LM93_REG_BOOST_HYST_34 0xc1
+#define LM93_REG_BOOST_HYST(nr) (0xc0 + (nr)/2)
+
+/* temp[1-4]_auto_pwm_[min|hyst] */
+#define LM93_REG_PWM_MIN_HYST_12 0xc3
+#define LM93_REG_PWM_MIN_HYST_34 0xc4
+#define LM93_REG_PWM_MIN_HYST(nr) (0xc3 + (nr)/2)
+
+/* prochot_override & prochot_interval */
+#define LM93_REG_PROCHOT_OVERRIDE 0xc6
+#define LM93_REG_PROCHOT_INTERVAL 0xc7
+
+/* temp[1-4]_auto_base (nr => 0-3) */
+#define LM93_REG_TEMP_BASE(nr) (0xd0 + (nr))
+
+/* temp[1-4]_auto_offsets (step => 0-11) */
+#define LM93_REG_TEMP_OFFSET(step) (0xd4 + (step))
+
+/* #PROCHOT & #VRDHOT PWM ramp control */
+#define LM93_REG_PWM_RAMP_CTL 0xbf
+
+/* miscellaneous */
+#define LM93_REG_SFC1 0xbc
+#define LM93_REG_SFC2 0xbd
+#define LM93_REG_GPI_VID_CTL 0xbe
+#define LM93_REG_SF_TACH_TO_PWM 0xe0
+
+/* error masks */
+#define LM93_REG_GPI_ERR_MASK 0xec
+#define LM93_REG_MISC_ERR_MASK 0xed
+
+/* LM93 REGISTER VALUES */
+#define LM93_MFR_ID 0x73
+#define LM93_MFR_ID_PROTOTYPE 0x72
+
+/* SMBus capabilities */
+#define LM93_SMBUS_FUNC_FULL (I2C_FUNC_SMBUS_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA)
+#define LM93_SMBUS_FUNC_MIN (I2C_FUNC_SMBUS_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WORD_DATA)
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(lm93);
+
+static int disable_block;
+module_param(disable_block, bool, 0);
+MODULE_PARM_DESC(disable_block,
+ "Set to non-zero to disable SMBus block data transactions.");
+
+static int init;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to non-zero to force chip initialization.");
+
+static int vccp_limit_type[2] = {0,0};
+module_param_array(vccp_limit_type, int, NULL, 0);
+MODULE_PARM_DESC(vccp_limit_type, "Configures in7 and in8 limit modes.");
+
+static int vid_agtl;
+module_param(vid_agtl, int, 0);
+MODULE_PARM_DESC(vid_agtl, "Configures VID pin input thresholds.");
+
+/* Driver data */
+static struct i2c_driver lm93_driver;
+
+/* LM93 BLOCK READ COMMANDS */
+static const struct { u8 cmd; u8 len; } lm93_block_read_cmds[12] = {
+ { 0xf2, 8 },
+ { 0xf3, 8 },
+ { 0xf4, 6 },
+ { 0xf5, 16 },
+ { 0xf6, 4 },
+ { 0xf7, 8 },
+ { 0xf8, 12 },
+ { 0xf9, 32 },
+ { 0xfa, 8 },
+ { 0xfb, 8 },
+ { 0xfc, 16 },
+ { 0xfd, 9 },
+};
+
+/* ALARMS: SYSCTL format described further below
+ REG: 64 bits in 8 registers, as immediately below */
+struct block1_t {
+ u8 host_status_1;
+ u8 host_status_2;
+ u8 host_status_3;
+ u8 host_status_4;
+ u8 p1_prochot_status;
+ u8 p2_prochot_status;
+ u8 gpi_status;
+ u8 fan_status;
+};
+
+/*
+ * Client-specific data
+ */
+struct lm93_data {
+ struct i2c_client client;
+ struct class_device *class_dev;
+
+ struct mutex update_lock;
+ unsigned long last_updated; /* In jiffies */
+
+ /* client update function */
+ void (*update)(struct lm93_data *, struct i2c_client *);
+
+ char valid; /* !=0 if following fields are valid */
+
+ /* register values, arranged by block read groups */
+ struct block1_t block1;
+
+ /* temp1 - temp4: unfiltered readings
+ temp1 - temp2: filtered readings */
+ u8 block2[6];
+
+ /* vin1 - vin16: readings */
+ u8 block3[16];
+
+ /* prochot1 - prochot2: readings */
+ struct {
+ u8 cur;
+ u8 avg;
+ } block4[2];
+
+ /* fan counts 1-4 => 14-bits, LE, *left* justified */
+ u16 block5[4];
+
+ /* block6 has a lot of data we don't need */
+ struct {
+ u8 min;
+ u8 max;
+ } temp_lim[3];
+
+ /* vin1 - vin16: low and high limits */
+ struct {
+ u8 min;
+ u8 max;
+ } block7[16];
+
+ /* fan count limits 1-4 => same format as block5 */
+ u16 block8[4];
+
+ /* pwm control registers (2 pwms, 4 regs) */
+ u8 block9[2][4];
+
+ /* auto/pwm base temp and offset temp registers */
+ struct {
+ u8 base[4];
+ u8 offset[12];
+ } block10;
+
+ /* master config register */
+ u8 config;
+
+ /* VID1 & VID2 => register format, 6-bits, right justified */
+ u8 vid[2];
+
+ /* prochot1 - prochot2: limits */
+ u8 prochot_max[2];
+
+ /* vccp1 & vccp2 (in7 & in8): VID relative limits (register format) */
+ u8 vccp_limits[2];
+
+ /* GPIO input state (register format, i.e. inverted) */
+ u8 gpi;
+
+ /* #PROCHOT override (register format) */
+ u8 prochot_override;
+
+ /* #PROCHOT intervals (register format) */
+ u8 prochot_interval;
+
+ /* Fan Boost Temperatures (register format) */
+ u8 boost[4];
+
+ /* Fan Boost Hysteresis (register format) */
+ u8 boost_hyst[2];
+
+ /* Temperature Zone Min. PWM & Hysteresis (register format) */
+ u8 auto_pwm_min_hyst[2];
+
+ /* #PROCHOT & #VRDHOT PWM Ramp Control */
+ u8 pwm_ramp_ctl;
+
+ /* miscellaneous setup regs */
+ u8 sfc1;
+ u8 sfc2;
+ u8 sf_tach_to_pwm;
+
+ /* The two PWM CTL2 registers can read something other than what was
+ last written for the OVR_DC field (duty cycle override). So, we
+ save the user-commanded value here. */
+ u8 pwm_override[2];
+};
+
+/* VID: mV
+ REG: 6-bits, right justified, *always* using Intel VRM/VRD 10 */
+static int LM93_VID_FROM_REG(u8 reg)
+{
+ return vid_from_reg((reg & 0x3f), 100);
+}
+
+/* min, max, and nominal register values, per channel (u8) */
+static const u8 lm93_vin_reg_min[16] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xae,
+};
+static const u8 lm93_vin_reg_max[16] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xd1,
+};
+/* Values from the datasheet. They're here for documentation only.
+static const u8 lm93_vin_reg_nom[16] = {
+ 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0,
+ 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x40, 0xc0,
+};
+*/
+
+/* min, max, and nominal voltage readings, per channel (mV)*/
+static const unsigned long lm93_vin_val_min[16] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 3000,
+};
+
+static const unsigned long lm93_vin_val_max[16] = {
+ 1236, 1236, 1236, 1600, 2000, 2000, 1600, 1600,
+ 4400, 6500, 3333, 2625, 1312, 1312, 1236, 3600,
+};
+/* Values from the datasheet. They're here for documentation only.
+static const unsigned long lm93_vin_val_nom[16] = {
+ 927, 927, 927, 1200, 1500, 1500, 1200, 1200,
+ 3300, 5000, 2500, 1969, 984, 984, 309, 3300,
+};
+*/
+
+static unsigned LM93_IN_FROM_REG(int nr, u8 reg)
+{
+ const long uV_max = lm93_vin_val_max[nr] * 1000;
+ const long uV_min = lm93_vin_val_min[nr] * 1000;
+
+ const long slope = (uV_max - uV_min) /
+ (lm93_vin_reg_max[nr] - lm93_vin_reg_min[nr]);
+ const long intercept = uV_min - slope * lm93_vin_reg_min[nr];
+
+ return (slope * reg + intercept + 500) / 1000;
+}
+
+/* IN: mV, limits determined by channel nr
+ REG: scaling determined by channel nr */
+static u8 LM93_IN_TO_REG(int nr, unsigned val)
+{
+ /* range limit */
+ const long mV = SENSORS_LIMIT(val,
+ lm93_vin_val_min[nr], lm93_vin_val_max[nr]);
+
+ /* try not to lose too much precision here */
+ const long uV = mV * 1000;
+ const long uV_max = lm93_vin_val_max[nr] * 1000;
+ const long uV_min = lm93_vin_val_min[nr] * 1000;
+
+ /* convert */
+ const long slope = (uV_max - uV_min) /
+ (lm93_vin_reg_max[nr] - lm93_vin_reg_min[nr]);
+ const long intercept = uV_min - slope * lm93_vin_reg_min[nr];
+
+ u8 result = ((uV - intercept + (slope/2)) / slope);
+ result = SENSORS_LIMIT(result,
+ lm93_vin_reg_min[nr], lm93_vin_reg_max[nr]);
+ return result;
+}
+
+/* vid in mV, upper == 0 indicates low limit, otherwise upper limit */
+static unsigned LM93_IN_REL_FROM_REG(u8 reg, int upper, int vid)
+{
+ const long uV_offset = upper ? (((reg >> 4 & 0x0f) + 1) * 12500) :
+ (((reg >> 0 & 0x0f) + 1) * -25000);
+ const long uV_vid = vid * 1000;
+ return (uV_vid + uV_offset + 5000) / 10000;
+}
+
+#define LM93_IN_MIN_FROM_REG(reg,vid) LM93_IN_REL_FROM_REG(reg,0,vid)
+#define LM93_IN_MAX_FROM_REG(reg,vid) LM93_IN_REL_FROM_REG(reg,1,vid)
+
+/* vid in mV , upper == 0 indicates low limit, otherwise upper limit
+ upper also determines which nibble of the register is returned
+ (the other nibble will be 0x0) */
+static u8 LM93_IN_REL_TO_REG(unsigned val, int upper, int vid)
+{
+ long uV_offset = vid * 1000 - val * 10000;
+ if (upper) {
+ uV_offset = SENSORS_LIMIT(uV_offset, 12500, 200000);
+ return (u8)((uV_offset / 12500 - 1) << 4);
+ } else {
+ uV_offset = SENSORS_LIMIT(uV_offset, -400000, -25000);
+ return (u8)((uV_offset / -25000 - 1) << 0);
+ }
+}
+
+/* TEMP: 1/1000 degrees C (-128C to +127C)
+ REG: 1C/bit, two's complement */
+static int LM93_TEMP_FROM_REG(u8 reg)
+{
+ return (s8)reg * 1000;
+}
+
+#define LM93_TEMP_MIN (-128000)
+#define LM93_TEMP_MAX ( 127000)
+
+/* TEMP: 1/1000 degrees C (-128C to +127C)
+ REG: 1C/bit, two's complement */
+static u8 LM93_TEMP_TO_REG(int temp)
+{
+ int ntemp = SENSORS_LIMIT(temp, LM93_TEMP_MIN, LM93_TEMP_MAX);
+ ntemp += (ntemp<0 ? -500 : 500);
+ return (u8)(ntemp / 1000);
+}
+
+/* Determine 4-bit temperature offset resolution */
+static int LM93_TEMP_OFFSET_MODE_FROM_REG(u8 sfc2, int nr)
+{
+ /* mode: 0 => 1C/bit, nonzero => 0.5C/bit */
+ return sfc2 & (nr < 2 ? 0x10 : 0x20);
+}
+
+/* This function is common to all 4-bit temperature offsets
+ reg is 4 bits right justified
+ mode 0 => 1C/bit, mode !0 => 0.5C/bit */
+static int LM93_TEMP_OFFSET_FROM_REG(u8 reg, int mode)
+{
+ return (reg & 0x0f) * (mode ? 5 : 10);
+}
+
+#define LM93_TEMP_OFFSET_MIN ( 0)
+#define LM93_TEMP_OFFSET_MAX0 (150)
+#define LM93_TEMP_OFFSET_MAX1 ( 75)
+
+/* This function is common to all 4-bit temperature offsets
+ returns 4 bits right justified
+ mode 0 => 1C/bit, mode !0 => 0.5C/bit */
+static u8 LM93_TEMP_OFFSET_TO_REG(int off, int mode)
+{
+ int factor = mode ? 5 : 10;
+
+ off = SENSORS_LIMIT(off, LM93_TEMP_OFFSET_MIN,
+ mode ? LM93_TEMP_OFFSET_MAX1 : LM93_TEMP_OFFSET_MAX0);
+ return (u8)((off + factor/2) / factor);
+}
+
+/* 0 <= nr <= 3 */
+static int LM93_TEMP_AUTO_OFFSET_FROM_REG(u8 reg, int nr, int mode)
+{
+ /* temp1-temp2 (nr=0,1) use lower nibble */
+ if (nr < 2)
+ return LM93_TEMP_OFFSET_FROM_REG(reg & 0x0f, mode);
+
+ /* temp3-temp4 (nr=2,3) use upper nibble */
+ else
+ return LM93_TEMP_OFFSET_FROM_REG(reg >> 4 & 0x0f, mode);
+}
+
+/* TEMP: 1/10 degrees C (0C to +15C (mode 0) or +7.5C (mode non-zero))
+ REG: 1.0C/bit (mode 0) or 0.5C/bit (mode non-zero)
+ 0 <= nr <= 3 */
+static u8 LM93_TEMP_AUTO_OFFSET_TO_REG(u8 old, int off, int nr, int mode)
+{
+ u8 new = LM93_TEMP_OFFSET_TO_REG(off, mode);
+
+ /* temp1-temp2 (nr=0,1) use lower nibble */
+ if (nr < 2)
+ return (old & 0xf0) | (new & 0x0f);
+
+ /* temp3-temp4 (nr=2,3) use upper nibble */
+ else
+ return (new << 4 & 0xf0) | (old & 0x0f);
+}
+
+static int LM93_AUTO_BOOST_HYST_FROM_REGS(struct lm93_data *data, int nr,
+ int mode)
+{
+ u8 reg;
+
+ switch (nr) {
+ case 0:
+ reg = data->boost_hyst[0] & 0x0f;
+ break;
+ case 1:
+ reg = data->boost_hyst[0] >> 4 & 0x0f;
+ break;
+ case 2:
+ reg = data->boost_hyst[1] & 0x0f;
+ break;
+ case 3:
+ default:
+ reg = data->boost_hyst[1] >> 4 & 0x0f;
+ break;
+ }
+
+ return LM93_TEMP_FROM_REG(data->boost[nr]) -
+ LM93_TEMP_OFFSET_FROM_REG(reg, mode);
+}
+
+static u8 LM93_AUTO_BOOST_HYST_TO_REG(struct lm93_data *data, long hyst,
+ int nr, int mode)
+{
+ u8 reg = LM93_TEMP_OFFSET_TO_REG(
+ (LM93_TEMP_FROM_REG(data->boost[nr]) - hyst), mode);
+
+ switch (nr) {
+ case 0:
+ reg = (data->boost_hyst[0] & 0xf0) | (reg & 0x0f);
+ break;
+ case 1:
+ reg = (reg << 4 & 0xf0) | (data->boost_hyst[0] & 0x0f);
+ break;
+ case 2:
+ reg = (data->boost_hyst[1] & 0xf0) | (reg & 0x0f);
+ break;
+ case 3:
+ default:
+ reg = (reg << 4 & 0xf0) | (data->boost_hyst[1] & 0x0f);
+ break;
+ }
+
+ return reg;
+}
+
+/* PWM: 0-255 per sensors documentation
+ REG: 0-13 as mapped below... right justified */
+typedef enum { LM93_PWM_MAP_HI_FREQ, LM93_PWM_MAP_LO_FREQ } pwm_freq_t;
+static int lm93_pwm_map[2][16] = {
+ {
+ 0x00, /* 0.00% */ 0x40, /* 25.00% */
+ 0x50, /* 31.25% */ 0x60, /* 37.50% */
+ 0x70, /* 43.75% */ 0x80, /* 50.00% */
+ 0x90, /* 56.25% */ 0xa0, /* 62.50% */
+ 0xb0, /* 68.75% */ 0xc0, /* 75.00% */
+ 0xd0, /* 81.25% */ 0xe0, /* 87.50% */
+ 0xf0, /* 93.75% */ 0xff, /* 100.00% */
+ 0xff, 0xff, /* 14, 15 are reserved and should never occur */
+ },
+ {
+ 0x00, /* 0.00% */ 0x40, /* 25.00% */
+ 0x49, /* 28.57% */ 0x52, /* 32.14% */
+ 0x5b, /* 35.71% */ 0x64, /* 39.29% */
+ 0x6d, /* 42.86% */ 0x76, /* 46.43% */
+ 0x80, /* 50.00% */ 0x89, /* 53.57% */
+ 0x92, /* 57.14% */ 0xb6, /* 71.43% */
+ 0xdb, /* 85.71% */ 0xff, /* 100.00% */
+ 0xff, 0xff, /* 14, 15 are reserved and should never occur */
+ },
+};
+
+static int LM93_PWM_FROM_REG(u8 reg, pwm_freq_t freq)
+{
+ return lm93_pwm_map[freq][reg & 0x0f];
+}
+
+/* round up to nearest match */
+static u8 LM93_PWM_TO_REG(int pwm, pwm_freq_t freq)
+{
+ int i;
+ for (i = 0; i < 13; i++)
+ if (pwm <= lm93_pwm_map[freq][i])
+ break;
+
+ /* can fall through with i==13 */
+ return (u8)i;
+}
+
+static int LM93_FAN_FROM_REG(u16 regs)
+{
+ const u16 count = le16_to_cpu(regs) >> 2;
+ return count==0 ? -1 : count==0x3fff ? 0: 1350000 / count;
+}
+
+/*
+ * RPM: (82.5 to 1350000)
+ * REG: 14-bits, LE, *left* justified
+ */
+static u16 LM93_FAN_TO_REG(long rpm)
+{
+ u16 count, regs;
+
+ if (rpm == 0) {
+ count = 0x3fff;
+ } else {
+ rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+ count = SENSORS_LIMIT((1350000 + rpm) / rpm, 1, 0x3ffe);
+ }
+
+ regs = count << 2;
+ return cpu_to_le16(regs);
+}
+
+/* PWM FREQ: HZ
+ REG: 0-7 as mapped below */
+static int lm93_pwm_freq_map[8] = {
+ 22500, 96, 84, 72, 60, 48, 36, 12
+};
+
+static int LM93_PWM_FREQ_FROM_REG(u8 reg)
+{
+ return lm93_pwm_freq_map[reg & 0x07];
+}
+
+/* round up to nearest match */
+static u8 LM93_PWM_FREQ_TO_REG(int freq)
+{
+ int i;
+ for (i = 7; i > 0; i--)
+ if (freq <= lm93_pwm_freq_map[i])
+ break;
+
+ /* can fall through with i==0 */
+ return (u8)i;
+}
+
+/* TIME: 1/100 seconds
+ * REG: 0-7 as mapped below */
+static int lm93_spinup_time_map[8] = {
+ 0, 10, 25, 40, 70, 100, 200, 400,
+};
+
+static int LM93_SPINUP_TIME_FROM_REG(u8 reg)
+{
+ return lm93_spinup_time_map[reg >> 5 & 0x07];
+}
+
+/* round up to nearest match */
+static u8 LM93_SPINUP_TIME_TO_REG(int time)
+{
+ int i;
+ for (i = 0; i < 7; i++)
+ if (time <= lm93_spinup_time_map[i])
+ break;
+
+ /* can fall through with i==8 */
+ return (u8)i;
+}
+
+#define LM93_RAMP_MIN 0
+#define LM93_RAMP_MAX 75
+
+static int LM93_RAMP_FROM_REG(u8 reg)
+{
+ return (reg & 0x0f) * 5;
+}
+
+/* RAMP: 1/100 seconds
+ REG: 50mS/bit 4-bits right justified */
+static u8 LM93_RAMP_TO_REG(int ramp)
+{
+ ramp = SENSORS_LIMIT(ramp, LM93_RAMP_MIN, LM93_RAMP_MAX);
+ return (u8)((ramp + 2) / 5);
+}
+
+/* PROCHOT: 0-255, 0 => 0%, 255 => > 96.6%
+ * REG: (same) */
+static u8 LM93_PROCHOT_TO_REG(long prochot)
+{
+ prochot = SENSORS_LIMIT(prochot, 0, 255);
+ return (u8)prochot;
+}
+
+/* PROCHOT-INTERVAL: 73 - 37200 (1/100 seconds)
+ * REG: 0-9 as mapped below */
+static int lm93_interval_map[10] = {
+ 73, 146, 290, 580, 1170, 2330, 4660, 9320, 18600, 37200,
+};
+
+static int LM93_INTERVAL_FROM_REG(u8 reg)
+{
+ return lm93_interval_map[reg & 0x0f];
+}
+
+/* round up to nearest match */
+static u8 LM93_INTERVAL_TO_REG(long interval)
+{
+ int i;
+ for (i = 0; i < 9; i++)
+ if (interval <= lm93_interval_map[i])
+ break;
+
+ /* can fall through with i==9 */
+ return (u8)i;
+}
+
+/* GPIO: 0-255, GPIO0 is LSB
+ * REG: inverted */
+static unsigned LM93_GPI_FROM_REG(u8 reg)
+{
+ return ~reg & 0xff;
+}
+
+/* alarm bitmask definitions
+ The LM93 has nearly 64 bits of error status... I've pared that down to
+ what I think is a useful subset in order to fit it into 32 bits.
+
+ Especially note that the #VRD_HOT alarms are missing because we provide
+ that information as values in another sysfs file.
+
+ If libsensors is extended to support 64 bit values, this could be revisited.
+*/
+#define LM93_ALARM_IN1 0x00000001
+#define LM93_ALARM_IN2 0x00000002
+#define LM93_ALARM_IN3 0x00000004
+#define LM93_ALARM_IN4 0x00000008
+#define LM93_ALARM_IN5 0x00000010
+#define LM93_ALARM_IN6 0x00000020
+#define LM93_ALARM_IN7 0x00000040
+#define LM93_ALARM_IN8 0x00000080
+#define LM93_ALARM_IN9 0x00000100
+#define LM93_ALARM_IN10 0x00000200
+#define LM93_ALARM_IN11 0x00000400
+#define LM93_ALARM_IN12 0x00000800
+#define LM93_ALARM_IN13 0x00001000
+#define LM93_ALARM_IN14 0x00002000
+#define LM93_ALARM_IN15 0x00004000
+#define LM93_ALARM_IN16 0x00008000
+#define LM93_ALARM_FAN1 0x00010000
+#define LM93_ALARM_FAN2 0x00020000
+#define LM93_ALARM_FAN3 0x00040000
+#define LM93_ALARM_FAN4 0x00080000
+#define LM93_ALARM_PH1_ERR 0x00100000
+#define LM93_ALARM_PH2_ERR 0x00200000
+#define LM93_ALARM_SCSI1_ERR 0x00400000
+#define LM93_ALARM_SCSI2_ERR 0x00800000
+#define LM93_ALARM_DVDDP1_ERR 0x01000000
+#define LM93_ALARM_DVDDP2_ERR 0x02000000
+#define LM93_ALARM_D1_ERR 0x04000000
+#define LM93_ALARM_D2_ERR 0x08000000
+#define LM93_ALARM_TEMP1 0x10000000
+#define LM93_ALARM_TEMP2 0x20000000
+#define LM93_ALARM_TEMP3 0x40000000
+
+static unsigned LM93_ALARMS_FROM_REG(struct block1_t b1)
+{
+ unsigned result;
+ result = b1.host_status_2 & 0x3f;
+
+ if (vccp_limit_type[0])
+ result |= (b1.host_status_4 & 0x10) << 2;
+ else
+ result |= b1.host_status_2 & 0x40;
+
+ if (vccp_limit_type[1])
+ result |= (b1.host_status_4 & 0x20) << 2;
+ else
+ result |= b1.host_status_2 & 0x80;
+
+ result |= b1.host_status_3 << 8;
+ result |= (b1.fan_status & 0x0f) << 16;
+ result |= (b1.p1_prochot_status & 0x80) << 13;
+ result |= (b1.p2_prochot_status & 0x80) << 14;
+ result |= (b1.host_status_4 & 0xfc) << 20;
+ result |= (b1.host_status_1 & 0x07) << 28;
+ return result;
+}
+
+#define MAX_RETRIES 5
+
+static u8 lm93_read_byte(struct i2c_client *client, u8 reg)
+{
+ int value, i;
+
+ /* retry in case of read errors */
+ for (i=1; i<=MAX_RETRIES; i++) {
+ if ((value = i2c_smbus_read_byte_data(client, reg)) >= 0) {
+ return value;
+ } else {
+ dev_warn(&client->dev,"lm93: read byte data failed, "
+ "address 0x%02x.\n", reg);
+ mdelay(i + 3);
+ }
+
+ }
+
+ /* <TODO> what to return in case of error? */
+ dev_err(&client->dev,"lm93: All read byte retries failed!!\n");
+ return 0;
+}
+
+static int lm93_write_byte(struct i2c_client *client, u8 reg, u8 value)
+{
+ int result;
+
+ /* <TODO> how to handle write errors? */
+ result = i2c_smbus_write_byte_data(client, reg, value);
+
+ if (result < 0)
+ dev_warn(&client->dev,"lm93: write byte data failed, "
+ "0x%02x at address 0x%02x.\n", value, reg);
+
+ return result;
+}
+
+static u16 lm93_read_word(struct i2c_client *client, u8 reg)
+{
+ int value, i;
+
+ /* retry in case of read errors */
+ for (i=1; i<=MAX_RETRIES; i++) {
+ if ((value = i2c_smbus_read_word_data(client, reg)) >= 0) {
+ return value;
+ } else {
+ dev_warn(&client->dev,"lm93: read word data failed, "
+ "address 0x%02x.\n", reg);
+ mdelay(i + 3);
+ }
+
+ }
+
+ /* <TODO> what to return in case of error? */
+ dev_err(&client->dev,"lm93: All read word retries failed!!\n");
+ return 0;
+}
+
+static int lm93_write_word(struct i2c_client *client, u8 reg, u16 value)
+{
+ int result;
+
+ /* <TODO> how to handle write errors? */
+ result = i2c_smbus_write_word_data(client, reg, value);
+
+ if (result < 0)
+ dev_warn(&client->dev,"lm93: write word data failed, "
+ "0x%04x at address 0x%02x.\n", value, reg);
+
+ return result;
+}
+
+static u8 lm93_block_buffer[I2C_SMBUS_BLOCK_MAX];
+
+/*
+ read block data into values, retry if not expected length
+ fbn => index to lm93_block_read_cmds table
+ (Fixed Block Number - section 14.5.2 of LM93 datasheet)
+*/
+static void lm93_read_block(struct i2c_client *client, u8 fbn, u8 *values)
+{
+ int i, result=0;
+
+ for (i = 1; i <= MAX_RETRIES; i++) {
+ result = i2c_smbus_read_block_data(client,
+ lm93_block_read_cmds[fbn].cmd, lm93_block_buffer);
+
+ if (result == lm93_block_read_cmds[fbn].len) {
+ break;
+ } else {
+ dev_warn(&client->dev,"lm93: block read data failed, "
+ "command 0x%02x.\n",
+ lm93_block_read_cmds[fbn].cmd);
+ mdelay(i + 3);
+ }
+ }
+
+ if (result == lm93_block_read_cmds[fbn].len) {
+ memcpy(values,lm93_block_buffer,lm93_block_read_cmds[fbn].len);
+ } else {
+ /* <TODO> what to do in case of error? */
+ }
+}
+
+static struct lm93_data *lm93_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ const unsigned long interval = HZ + (HZ / 2);
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + interval) ||
+ !data->valid) {
+
+ data->update(data, client);
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+/* update routine for data that has no corresponding SMBus block command */
+static void lm93_update_client_common(struct lm93_data *data,
+ struct i2c_client *client)
+{
+ int i;
+ u8 *ptr;
+
+ /* temp1 - temp4: limits */
+ for (i = 0; i < 4; i++) {
+ data->temp_lim[i].min =
+ lm93_read_byte(client, LM93_REG_TEMP_MIN(i));
+ data->temp_lim[i].max =
+ lm93_read_byte(client, LM93_REG_TEMP_MAX(i));
+ }
+
+ /* config register */
+ data->config = lm93_read_byte(client, LM93_REG_CONFIG);
+
+ /* vid1 - vid2: values */
+ for (i = 0; i < 2; i++)
+ data->vid[i] = lm93_read_byte(client, LM93_REG_VID(i));
+
+ /* prochot1 - prochot2: limits */
+ for (i = 0; i < 2; i++)
+ data->prochot_max[i] = lm93_read_byte(client,
+ LM93_REG_PROCHOT_MAX(i));
+
+ /* vccp1 - vccp2: VID relative limits */
+ for (i = 0; i < 2; i++)
+ data->vccp_limits[i] = lm93_read_byte(client,
+ LM93_REG_VCCP_LIMIT_OFF(i));
+
+ /* GPIO input state */
+ data->gpi = lm93_read_byte(client, LM93_REG_GPI);
+
+ /* #PROCHOT override state */
+ data->prochot_override = lm93_read_byte(client,
+ LM93_REG_PROCHOT_OVERRIDE);
+
+ /* #PROCHOT intervals */
+ data->prochot_interval = lm93_read_byte(client,
+ LM93_REG_PROCHOT_INTERVAL);
+
+ /* Fan Boost Termperature registers */
+ for (i = 0; i < 4; i++)
+ data->boost[i] = lm93_read_byte(client, LM93_REG_BOOST(i));
+
+ /* Fan Boost Temperature Hyst. registers */
+ data->boost_hyst[0] = lm93_read_byte(client, LM93_REG_BOOST_HYST_12);
+ data->boost_hyst[1] = lm93_read_byte(client, LM93_REG_BOOST_HYST_34);
+
+ /* Temperature Zone Min. PWM & Hysteresis registers */
+ data->auto_pwm_min_hyst[0] =
+ lm93_read_byte(client, LM93_REG_PWM_MIN_HYST_12);
+ data->auto_pwm_min_hyst[1] =
+ lm93_read_byte(client, LM93_REG_PWM_MIN_HYST_34);
+
+ /* #PROCHOT & #VRDHOT PWM Ramp Control register */
+ data->pwm_ramp_ctl = lm93_read_byte(client, LM93_REG_PWM_RAMP_CTL);
+
+ /* misc setup registers */
+ data->sfc1 = lm93_read_byte(client, LM93_REG_SFC1);
+ data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
+ data->sf_tach_to_pwm = lm93_read_byte(client,
+ LM93_REG_SF_TACH_TO_PWM);
+
+ /* write back alarm values to clear */
+ for (i = 0, ptr = (u8 *)(&data->block1); i < 8; i++)
+ lm93_write_byte(client, LM93_REG_HOST_ERROR_1 + i, *(ptr + i));
+}
+
+/* update routine which uses SMBus block data commands */
+static void lm93_update_client_full(struct lm93_data *data,
+ struct i2c_client *client)
+{
+ dev_dbg(&client->dev,"starting device update (block data enabled)\n");
+
+ /* in1 - in16: values & limits */
+ lm93_read_block(client, 3, (u8 *)(data->block3));
+ lm93_read_block(client, 7, (u8 *)(data->block7));
+
+ /* temp1 - temp4: values */
+ lm93_read_block(client, 2, (u8 *)(data->block2));
+
+ /* prochot1 - prochot2: values */
+ lm93_read_block(client, 4, (u8 *)(data->block4));
+
+ /* fan1 - fan4: values & limits */
+ lm93_read_block(client, 5, (u8 *)(data->block5));
+ lm93_read_block(client, 8, (u8 *)(data->block8));
+
+ /* pmw control registers */
+ lm93_read_block(client, 9, (u8 *)(data->block9));
+
+ /* alarm values */
+ lm93_read_block(client, 1, (u8 *)(&data->block1));
+
+ /* auto/pwm registers */
+ lm93_read_block(client, 10, (u8 *)(&data->block10));
+
+ lm93_update_client_common(data, client);
+}
+
+/* update routine which uses SMBus byte/word data commands only */
+static void lm93_update_client_min(struct lm93_data *data,
+ struct i2c_client *client)
+{
+ int i,j;
+ u8 *ptr;
+
+ dev_dbg(&client->dev,"starting device update (block data disabled)\n");
+
+ /* in1 - in16: values & limits */
+ for (i = 0; i < 16; i++) {
+ data->block3[i] =
+ lm93_read_byte(client, LM93_REG_IN(i));
+ data->block7[i].min =
+ lm93_read_byte(client, LM93_REG_IN_MIN(i));
+ data->block7[i].max =
+ lm93_read_byte(client, LM93_REG_IN_MAX(i));
+ }
+
+ /* temp1 - temp4: values */
+ for (i = 0; i < 4; i++) {
+ data->block2[i] =
+ lm93_read_byte(client, LM93_REG_TEMP(i));
+ }
+
+ /* prochot1 - prochot2: values */
+ for (i = 0; i < 2; i++) {
+ data->block4[i].cur =
+ lm93_read_byte(client, LM93_REG_PROCHOT_CUR(i));
+ data->block4[i].avg =
+ lm93_read_byte(client, LM93_REG_PROCHOT_AVG(i));
+ }
+
+ /* fan1 - fan4: values & limits */
+ for (i = 0; i < 4; i++) {
+ data->block5[i] =
+ lm93_read_word(client, LM93_REG_FAN(i));
+ data->block8[i] =
+ lm93_read_word(client, LM93_REG_FAN_MIN(i));
+ }
+
+ /* pwm control registers */
+ for (i = 0; i < 2; i++) {
+ for (j = 0; j < 4; j++) {
+ data->block9[i][j] =
+ lm93_read_byte(client, LM93_REG_PWM_CTL(i,j));
+ }
+ }
+
+ /* alarm values */
+ for (i = 0, ptr = (u8 *)(&data->block1); i < 8; i++) {
+ *(ptr + i) =
+ lm93_read_byte(client, LM93_REG_HOST_ERROR_1 + i);
+ }
+
+ /* auto/pwm (base temp) registers */
+ for (i = 0; i < 4; i++) {
+ data->block10.base[i] =
+ lm93_read_byte(client, LM93_REG_TEMP_BASE(i));
+ }
+
+ /* auto/pwm (offset temp) registers */
+ for (i = 0; i < 12; i++) {
+ data->block10.offset[i] =
+ lm93_read_byte(client, LM93_REG_TEMP_OFFSET(i));
+ }
+
+ lm93_update_client_common(data, client);
+}
+
+/* following are the sysfs callback functions */
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf, "%d\n", LM93_IN_FROM_REG(nr, data->block3[nr]));
+}
+
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 7);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in, NULL, 8);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in, NULL, 9);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_in, NULL, 10);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_in, NULL, 11);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_in, NULL, 12);
+static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, show_in, NULL, 13);
+static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, show_in, NULL, 14);
+static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_in, NULL, 15);
+
+static ssize_t show_in_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ int vccp = nr - 6;
+ long rc, vid;
+
+ if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
+ vid = LM93_VID_FROM_REG(data->vid[vccp]);
+ rc = LM93_IN_MIN_FROM_REG(data->vccp_limits[vccp], vid);
+ }
+ else {
+ rc = LM93_IN_FROM_REG(nr, data->block7[nr].min); \
+ }
+ return sprintf(buf, "%ld\n", rc); \
+}
+
+static ssize_t store_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ int vccp = nr - 6;
+ long vid;
+
+ mutex_lock(&data->update_lock);
+ if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
+ vid = LM93_VID_FROM_REG(data->vid[vccp]);
+ data->vccp_limits[vccp] = (data->vccp_limits[vccp] & 0xf0) |
+ LM93_IN_REL_TO_REG(val, 0, vid);
+ lm93_write_byte(client, LM93_REG_VCCP_LIMIT_OFF(vccp),
+ data->vccp_limits[vccp]);
+ }
+ else {
+ data->block7[nr].min = LM93_IN_TO_REG(nr,val);
+ lm93_write_byte(client, LM93_REG_IN_MIN(nr),
+ data->block7[nr].min);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 0);
+static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 1);
+static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 2);
+static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 3);
+static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 4);
+static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 5);
+static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 6);
+static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 7);
+static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 8);
+static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 9);
+static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 10);
+static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 11);
+static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 12);
+static SENSOR_DEVICE_ATTR(in14_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 13);
+static SENSOR_DEVICE_ATTR(in15_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 14);
+static SENSOR_DEVICE_ATTR(in16_min, S_IWUSR | S_IRUGO,
+ show_in_min, store_in_min, 15);
+
+static ssize_t show_in_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ int vccp = nr - 6;
+ long rc, vid;
+
+ if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
+ vid = LM93_VID_FROM_REG(data->vid[vccp]);
+ rc = LM93_IN_MAX_FROM_REG(data->vccp_limits[vccp],vid);
+ }
+ else {
+ rc = LM93_IN_FROM_REG(nr,data->block7[nr].max); \
+ }
+ return sprintf(buf,"%ld\n",rc); \
+}
+
+static ssize_t store_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ int vccp = nr - 6;
+ long vid;
+
+ mutex_lock(&data->update_lock);
+ if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
+ vid = LM93_VID_FROM_REG(data->vid[vccp]);
+ data->vccp_limits[vccp] = (data->vccp_limits[vccp] & 0x0f) |
+ LM93_IN_REL_TO_REG(val, 1, vid);
+ lm93_write_byte(client, LM93_REG_VCCP_LIMIT_OFF(vccp),
+ data->vccp_limits[vccp]);
+ }
+ else {
+ data->block7[nr].max = LM93_IN_TO_REG(nr,val);
+ lm93_write_byte(client, LM93_REG_IN_MAX(nr),
+ data->block7[nr].max);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 0);
+static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 1);
+static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 2);
+static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 3);
+static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 4);
+static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 5);
+static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 6);
+static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 7);
+static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 8);
+static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 9);
+static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 10);
+static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 11);
+static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 12);
+static SENSOR_DEVICE_ATTR(in14_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 13);
+static SENSOR_DEVICE_ATTR(in15_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 14);
+static SENSOR_DEVICE_ATTR(in16_max, S_IWUSR | S_IRUGO,
+ show_in_max, store_in_max, 15);
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->block2[nr]));
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+
+static ssize_t show_temp_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->temp_lim[nr].min));
+}
+
+static ssize_t store_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp_lim[nr].min = LM93_TEMP_TO_REG(val);
+ lm93_write_byte(client, LM93_REG_TEMP_MIN(nr), data->temp_lim[nr].min);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+ show_temp_min, store_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO,
+ show_temp_min, store_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO,
+ show_temp_min, store_temp_min, 2);
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->temp_lim[nr].max));
+}
+
+static ssize_t store_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp_lim[nr].max = LM93_TEMP_TO_REG(val);
+ lm93_write_byte(client, LM93_REG_TEMP_MAX(nr), data->temp_lim[nr].max);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+ show_temp_max, store_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO,
+ show_temp_max, store_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO,
+ show_temp_max, store_temp_max, 2);
+
+static ssize_t show_temp_auto_base(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->block10.base[nr]));
+}
+
+static ssize_t store_temp_auto_base(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->block10.base[nr] = LM93_TEMP_TO_REG(val);
+ lm93_write_byte(client, LM93_REG_TEMP_BASE(nr), data->block10.base[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_auto_base, S_IWUSR | S_IRUGO,
+ show_temp_auto_base, store_temp_auto_base, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_base, S_IWUSR | S_IRUGO,
+ show_temp_auto_base, store_temp_auto_base, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_base, S_IWUSR | S_IRUGO,
+ show_temp_auto_base, store_temp_auto_base, 2);
+
+static ssize_t show_temp_auto_boost(struct device *dev,
+ struct device_attribute *attr,char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->boost[nr]));
+}
+
+static ssize_t store_temp_auto_boost(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->boost[nr] = LM93_TEMP_TO_REG(val);
+ lm93_write_byte(client, LM93_REG_BOOST(nr), data->boost[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_auto_boost, S_IWUSR | S_IRUGO,
+ show_temp_auto_boost, store_temp_auto_boost, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_boost, S_IWUSR | S_IRUGO,
+ show_temp_auto_boost, store_temp_auto_boost, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_boost, S_IWUSR | S_IRUGO,
+ show_temp_auto_boost, store_temp_auto_boost, 2);
+
+static ssize_t show_temp_auto_boost_hyst(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
+ return sprintf(buf,"%d\n",
+ LM93_AUTO_BOOST_HYST_FROM_REGS(data, nr, mode));
+}
+
+static ssize_t store_temp_auto_boost_hyst(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ /* force 0.5C/bit mode */
+ data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
+ data->sfc2 |= ((nr < 2) ? 0x10 : 0x20);
+ lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
+ data->boost_hyst[nr/2] = LM93_AUTO_BOOST_HYST_TO_REG(data, val, nr, 1);
+ lm93_write_byte(client, LM93_REG_BOOST_HYST(nr),
+ data->boost_hyst[nr/2]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_auto_boost_hyst, S_IWUSR | S_IRUGO,
+ show_temp_auto_boost_hyst,
+ store_temp_auto_boost_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_boost_hyst, S_IWUSR | S_IRUGO,
+ show_temp_auto_boost_hyst,
+ store_temp_auto_boost_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_boost_hyst, S_IWUSR | S_IRUGO,
+ show_temp_auto_boost_hyst,
+ store_temp_auto_boost_hyst, 2);
+
+static ssize_t show_temp_auto_offset(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *s_attr = to_sensor_dev_attr_2(attr);
+ int nr = s_attr->index;
+ int ofs = s_attr->nr;
+ struct lm93_data *data = lm93_update_device(dev);
+ int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
+ return sprintf(buf,"%d\n",
+ LM93_TEMP_AUTO_OFFSET_FROM_REG(data->block10.offset[ofs],
+ nr,mode));
+}
+
+static ssize_t store_temp_auto_offset(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *s_attr = to_sensor_dev_attr_2(attr);
+ int nr = s_attr->index;
+ int ofs = s_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ /* force 0.5C/bit mode */
+ data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
+ data->sfc2 |= ((nr < 2) ? 0x10 : 0x20);
+ lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
+ data->block10.offset[ofs] = LM93_TEMP_AUTO_OFFSET_TO_REG(
+ data->block10.offset[ofs], val, nr, 1);
+ lm93_write_byte(client, LM93_REG_TEMP_OFFSET(ofs),
+ data->block10.offset[ofs]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset1, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset2, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset3, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 2, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset4, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 3, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset5, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 4, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset6, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 5, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset7, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 6, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset8, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 7, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset9, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 8, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset10, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 9, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset11, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 10, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_offset12, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 11, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset1, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset2, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 1, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset3, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 2, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset4, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 3, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset5, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 4, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset6, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 5, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset7, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 6, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset8, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 7, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset9, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 8, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset10, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 9, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset11, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 10, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_offset12, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 11, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset1, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset2, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 1, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset3, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 2, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset4, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 3, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset5, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 4, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset6, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 5, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset7, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 6, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset8, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 7, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset9, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 8, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset10, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 9, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset11, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 10, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_offset12, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset, store_temp_auto_offset, 11, 2);
+
+static ssize_t show_temp_auto_pwm_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ u8 reg, ctl4;
+ struct lm93_data *data = lm93_update_device(dev);
+ reg = data->auto_pwm_min_hyst[nr/2] >> 4 & 0x0f;
+ ctl4 = data->block9[nr][LM93_PWM_CTL4];
+ return sprintf(buf,"%d\n",LM93_PWM_FROM_REG(reg, (ctl4 & 0x07) ?
+ LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ));
+}
+
+static ssize_t store_temp_auto_pwm_min(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 reg, ctl4;
+
+ mutex_lock(&data->update_lock);
+ reg = lm93_read_byte(client, LM93_REG_PWM_MIN_HYST(nr));
+ ctl4 = lm93_read_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
+ reg = (reg & 0x0f) |
+ LM93_PWM_TO_REG(val, (ctl4 & 0x07) ?
+ LM93_PWM_MAP_LO_FREQ :
+ LM93_PWM_MAP_HI_FREQ) << 4;
+ data->auto_pwm_min_hyst[nr/2] = reg;
+ lm93_write_byte(client, LM93_REG_PWM_MIN_HYST(nr), reg);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_auto_pwm_min, S_IWUSR | S_IRUGO,
+ show_temp_auto_pwm_min,
+ store_temp_auto_pwm_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_pwm_min, S_IWUSR | S_IRUGO,
+ show_temp_auto_pwm_min,
+ store_temp_auto_pwm_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_pwm_min, S_IWUSR | S_IRUGO,
+ show_temp_auto_pwm_min,
+ store_temp_auto_pwm_min, 2);
+
+static ssize_t show_temp_auto_offset_hyst(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
+ return sprintf(buf,"%d\n",LM93_TEMP_OFFSET_FROM_REG(
+ data->auto_pwm_min_hyst[nr/2], mode));
+}
+
+static ssize_t store_temp_auto_offset_hyst(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 reg;
+
+ mutex_lock(&data->update_lock);
+ /* force 0.5C/bit mode */
+ data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
+ data->sfc2 |= ((nr < 2) ? 0x10 : 0x20);
+ lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
+ reg = data->auto_pwm_min_hyst[nr/2];
+ reg = (reg & 0xf0) | (LM93_TEMP_OFFSET_TO_REG(val, 1) & 0x0f);
+ data->auto_pwm_min_hyst[nr/2] = reg;
+ lm93_write_byte(client, LM93_REG_PWM_MIN_HYST(nr), reg);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_auto_offset_hyst, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset_hyst,
+ store_temp_auto_offset_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_offset_hyst, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset_hyst,
+ store_temp_auto_offset_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_offset_hyst, S_IWUSR | S_IRUGO,
+ show_temp_auto_offset_hyst,
+ store_temp_auto_offset_hyst, 2);
+
+static ssize_t show_fan_input(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute *s_attr = to_sensor_dev_attr(attr);
+ int nr = s_attr->index;
+ struct lm93_data *data = lm93_update_device(dev);
+
+ return sprintf(buf,"%d\n",LM93_FAN_FROM_REG(data->block5[nr]));
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3);
+
+static ssize_t show_fan_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+
+ return sprintf(buf,"%d\n",LM93_FAN_FROM_REG(data->block8[nr]));
+}
+
+static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->block8[nr] = LM93_FAN_TO_REG(val);
+ lm93_write_word(client,LM93_REG_FAN_MIN(nr),data->block8[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
+ show_fan_min, store_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
+ show_fan_min, store_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
+ show_fan_min, store_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
+ show_fan_min, store_fan_min, 3);
+
+/* some tedious bit-twiddling here to deal with the register format:
+
+ data->sf_tach_to_pwm: (tach to pwm mapping bits)
+
+ bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ T4:P2 T4:P1 T3:P2 T3:P1 T2:P2 T2:P1 T1:P2 T1:P1
+
+ data->sfc2: (enable bits)
+
+ bit | 3 | 2 | 1 | 0
+ T4 T3 T2 T1
+*/
+
+static ssize_t show_fan_smart_tach(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ long rc = 0;
+ int mapping;
+
+ /* extract the relevant mapping */
+ mapping = (data->sf_tach_to_pwm >> (nr * 2)) & 0x03;
+
+ /* if there's a mapping and it's enabled */
+ if (mapping && ((data->sfc2 >> nr) & 0x01))
+ rc = mapping;
+ return sprintf(buf,"%ld\n",rc);
+}
+
+/* helper function - must grab data->update_lock before calling
+ fan is 0-3, indicating fan1-fan4 */
+static void lm93_write_fan_smart_tach(struct i2c_client *client,
+ struct lm93_data *data, int fan, long value)
+{
+ /* insert the new mapping and write it out */
+ data->sf_tach_to_pwm = lm93_read_byte(client, LM93_REG_SF_TACH_TO_PWM);
+ data->sf_tach_to_pwm &= ~(0x3 << fan * 2);
+ data->sf_tach_to_pwm |= value << fan * 2;
+ lm93_write_byte(client, LM93_REG_SF_TACH_TO_PWM, data->sf_tach_to_pwm);
+
+ /* insert the enable bit and write it out */
+ data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
+ if (value)
+ data->sfc2 |= 1 << fan;
+ else
+ data->sfc2 &= ~(1 << fan);
+ lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
+}
+
+static ssize_t store_fan_smart_tach(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ /* sanity test, ignore the write otherwise */
+ if (0 <= val && val <= 2) {
+ /* can't enable if pwm freq is 22.5KHz */
+ if (val) {
+ u8 ctl4 = lm93_read_byte(client,
+ LM93_REG_PWM_CTL(val-1,LM93_PWM_CTL4));
+ if ((ctl4 & 0x07) == 0)
+ val = 0;
+ }
+ lm93_write_fan_smart_tach(client, data, nr, val);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(fan1_smart_tach, S_IWUSR | S_IRUGO,
+ show_fan_smart_tach, store_fan_smart_tach, 0);
+static SENSOR_DEVICE_ATTR(fan2_smart_tach, S_IWUSR | S_IRUGO,
+ show_fan_smart_tach, store_fan_smart_tach, 1);
+static SENSOR_DEVICE_ATTR(fan3_smart_tach, S_IWUSR | S_IRUGO,
+ show_fan_smart_tach, store_fan_smart_tach, 2);
+static SENSOR_DEVICE_ATTR(fan4_smart_tach, S_IWUSR | S_IRUGO,
+ show_fan_smart_tach, store_fan_smart_tach, 3);
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ u8 ctl2, ctl4;
+ long rc;
+
+ ctl2 = data->block9[nr][LM93_PWM_CTL2];
+ ctl4 = data->block9[nr][LM93_PWM_CTL4];
+ if (ctl2 & 0x01) /* show user commanded value if enabled */
+ rc = data->pwm_override[nr];
+ else /* show present h/w value if manual pwm disabled */
+ rc = LM93_PWM_FROM_REG(ctl2 >> 4, (ctl4 & 0x07) ?
+ LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ);
+ return sprintf(buf,"%ld\n",rc);
+}
+
+static ssize_t store_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 ctl2, ctl4;
+
+ mutex_lock(&data->update_lock);
+ ctl2 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2));
+ ctl4 = lm93_read_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
+ ctl2 = (ctl2 & 0x0f) | LM93_PWM_TO_REG(val,(ctl4 & 0x07) ?
+ LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ) << 4;
+ /* save user commanded value */
+ data->pwm_override[nr] = LM93_PWM_FROM_REG(ctl2 >> 4,
+ (ctl4 & 0x07) ? LM93_PWM_MAP_LO_FREQ :
+ LM93_PWM_MAP_HI_FREQ);
+ lm93_write_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2),ctl2);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
+
+static ssize_t show_pwm_enable(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ u8 ctl2;
+ long rc;
+
+ ctl2 = data->block9[nr][LM93_PWM_CTL2];
+ if (ctl2 & 0x01) /* manual override enabled ? */
+ rc = ((ctl2 & 0xF0) == 0xF0) ? 0 : 1;
+ else
+ rc = 2;
+ return sprintf(buf,"%ld\n",rc);
+}
+
+static ssize_t store_pwm_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 ctl2;
+
+ mutex_lock(&data->update_lock);
+ ctl2 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2));
+
+ switch (val) {
+ case 0:
+ ctl2 |= 0xF1; /* enable manual override, set PWM to max */
+ break;
+ case 1: ctl2 |= 0x01; /* enable manual override */
+ break;
+ case 2: ctl2 &= ~0x01; /* disable manual override */
+ break;
+ default:
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ }
+
+ lm93_write_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2),ctl2);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ show_pwm_enable, store_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
+ show_pwm_enable, store_pwm_enable, 1);
+
+static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ u8 ctl4;
+
+ ctl4 = data->block9[nr][LM93_PWM_CTL4];
+ return sprintf(buf,"%d\n",LM93_PWM_FREQ_FROM_REG(ctl4));
+}
+
+/* helper function - must grab data->update_lock before calling
+ pwm is 0-1, indicating pwm1-pwm2
+ this disables smart tach for all tach channels bound to the given pwm */
+static void lm93_disable_fan_smart_tach(struct i2c_client *client,
+ struct lm93_data *data, int pwm)
+{
+ int mapping = lm93_read_byte(client, LM93_REG_SF_TACH_TO_PWM);
+ int mask;
+
+ /* collapse the mapping into a mask of enable bits */
+ mapping = (mapping >> pwm) & 0x55;
+ mask = mapping & 0x01;
+ mask |= (mapping & 0x04) >> 1;
+ mask |= (mapping & 0x10) >> 2;
+ mask |= (mapping & 0x40) >> 3;
+
+ /* disable smart tach according to the mask */
+ data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
+ data->sfc2 &= ~mask;
+ lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
+}
+
+static ssize_t store_pwm_freq(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 ctl4;
+
+ mutex_lock(&data->update_lock);
+ ctl4 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
+ ctl4 = (ctl4 & 0xf8) | LM93_PWM_FREQ_TO_REG(val);
+ data->block9[nr][LM93_PWM_CTL4] = ctl4;
+ /* ctl4 == 0 -> 22.5KHz -> disable smart tach */
+ if (!ctl4)
+ lm93_disable_fan_smart_tach(client, data, nr);
+ lm93_write_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4), ctl4);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_freq, S_IWUSR | S_IRUGO,
+ show_pwm_freq, store_pwm_freq, 0);
+static SENSOR_DEVICE_ATTR(pwm2_freq, S_IWUSR | S_IRUGO,
+ show_pwm_freq, store_pwm_freq, 1);
+
+static ssize_t show_pwm_auto_channels(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",data->block9[nr][LM93_PWM_CTL1]);
+}
+
+static ssize_t store_pwm_auto_channels(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->block9[nr][LM93_PWM_CTL1] = SENSORS_LIMIT(val, 0, 255);
+ lm93_write_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL1),
+ data->block9[nr][LM93_PWM_CTL1]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels, S_IWUSR | S_IRUGO,
+ show_pwm_auto_channels, store_pwm_auto_channels, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels, S_IWUSR | S_IRUGO,
+ show_pwm_auto_channels, store_pwm_auto_channels, 1);
+
+static ssize_t show_pwm_auto_spinup_min(struct device *dev,
+ struct device_attribute *attr,char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ u8 ctl3, ctl4;
+
+ ctl3 = data->block9[nr][LM93_PWM_CTL3];
+ ctl4 = data->block9[nr][LM93_PWM_CTL4];
+ return sprintf(buf,"%d\n",
+ LM93_PWM_FROM_REG(ctl3 & 0x0f, (ctl4 & 0x07) ?
+ LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ));
+}
+
+static ssize_t store_pwm_auto_spinup_min(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 ctl3, ctl4;
+
+ mutex_lock(&data->update_lock);
+ ctl3 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3));
+ ctl4 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL4));
+ ctl3 = (ctl3 & 0xf0) | LM93_PWM_TO_REG(val, (ctl4 & 0x07) ?
+ LM93_PWM_MAP_LO_FREQ :
+ LM93_PWM_MAP_HI_FREQ);
+ data->block9[nr][LM93_PWM_CTL3] = ctl3;
+ lm93_write_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3), ctl3);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_spinup_min, S_IWUSR | S_IRUGO,
+ show_pwm_auto_spinup_min,
+ store_pwm_auto_spinup_min, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_spinup_min, S_IWUSR | S_IRUGO,
+ show_pwm_auto_spinup_min,
+ store_pwm_auto_spinup_min, 1);
+
+static ssize_t show_pwm_auto_spinup_time(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_SPINUP_TIME_FROM_REG(
+ data->block9[nr][LM93_PWM_CTL3]));
+}
+
+static ssize_t store_pwm_auto_spinup_time(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 ctl3;
+
+ mutex_lock(&data->update_lock);
+ ctl3 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3));
+ ctl3 = (ctl3 & 0x1f) | (LM93_SPINUP_TIME_TO_REG(val) << 5 & 0xe0);
+ data->block9[nr][LM93_PWM_CTL3] = ctl3;
+ lm93_write_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3), ctl3);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_spinup_time, S_IWUSR | S_IRUGO,
+ show_pwm_auto_spinup_time,
+ store_pwm_auto_spinup_time, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_spinup_time, S_IWUSR | S_IRUGO,
+ show_pwm_auto_spinup_time,
+ store_pwm_auto_spinup_time, 1);
+
+static ssize_t show_pwm_auto_prochot_ramp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",
+ LM93_RAMP_FROM_REG(data->pwm_ramp_ctl >> 4 & 0x0f));
+}
+
+static ssize_t store_pwm_auto_prochot_ramp(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 ramp;
+
+ mutex_lock(&data->update_lock);
+ ramp = lm93_read_byte(client, LM93_REG_PWM_RAMP_CTL);
+ ramp = (ramp & 0x0f) | (LM93_RAMP_TO_REG(val) << 4 & 0xf0);
+ lm93_write_byte(client, LM93_REG_PWM_RAMP_CTL, ramp);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static DEVICE_ATTR(pwm_auto_prochot_ramp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_prochot_ramp,
+ store_pwm_auto_prochot_ramp);
+
+static ssize_t show_pwm_auto_vrdhot_ramp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",
+ LM93_RAMP_FROM_REG(data->pwm_ramp_ctl & 0x0f));
+}
+
+static ssize_t store_pwm_auto_vrdhot_ramp(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 ramp;
+
+ mutex_lock(&data->update_lock);
+ ramp = lm93_read_byte(client, LM93_REG_PWM_RAMP_CTL);
+ ramp = (ramp & 0xf0) | (LM93_RAMP_TO_REG(val) & 0x0f);
+ lm93_write_byte(client, LM93_REG_PWM_RAMP_CTL, ramp);
+ mutex_unlock(&data->update_lock);
+ return 0;
+}
+
+static DEVICE_ATTR(pwm_auto_vrdhot_ramp, S_IRUGO | S_IWUSR,
+ show_pwm_auto_vrdhot_ramp,
+ store_pwm_auto_vrdhot_ramp);
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_VID_FROM_REG(data->vid[nr]));
+}
+
+static SENSOR_DEVICE_ATTR(vid1, S_IRUGO, show_vid, NULL, 0);
+static SENSOR_DEVICE_ATTR(vid2, S_IRUGO, show_vid, NULL, 1);
+
+static ssize_t show_prochot(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",data->block4[nr].cur);
+}
+
+static SENSOR_DEVICE_ATTR(prochot1, S_IRUGO, show_prochot, NULL, 0);
+static SENSOR_DEVICE_ATTR(prochot2, S_IRUGO, show_prochot, NULL, 1);
+
+static ssize_t show_prochot_avg(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",data->block4[nr].avg);
+}
+
+static SENSOR_DEVICE_ATTR(prochot1_avg, S_IRUGO, show_prochot_avg, NULL, 0);
+static SENSOR_DEVICE_ATTR(prochot2_avg, S_IRUGO, show_prochot_avg, NULL, 1);
+
+static ssize_t show_prochot_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",data->prochot_max[nr]);
+}
+
+static ssize_t store_prochot_max(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->prochot_max[nr] = LM93_PROCHOT_TO_REG(val);
+ lm93_write_byte(client, LM93_REG_PROCHOT_MAX(nr),
+ data->prochot_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(prochot1_max, S_IWUSR | S_IRUGO,
+ show_prochot_max, store_prochot_max, 0);
+static SENSOR_DEVICE_ATTR(prochot2_max, S_IWUSR | S_IRUGO,
+ show_prochot_max, store_prochot_max, 1);
+
+static const u8 prochot_override_mask[] = { 0x80, 0x40 };
+
+static ssize_t show_prochot_override(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",
+ (data->prochot_override & prochot_override_mask[nr]) ? 1 : 0);
+}
+
+static ssize_t store_prochot_override(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ if (val)
+ data->prochot_override |= prochot_override_mask[nr];
+ else
+ data->prochot_override &= (~prochot_override_mask[nr]);
+ lm93_write_byte(client, LM93_REG_PROCHOT_OVERRIDE,
+ data->prochot_override);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(prochot1_override, S_IWUSR | S_IRUGO,
+ show_prochot_override, store_prochot_override, 0);
+static SENSOR_DEVICE_ATTR(prochot2_override, S_IWUSR | S_IRUGO,
+ show_prochot_override, store_prochot_override, 1);
+
+static ssize_t show_prochot_interval(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ u8 tmp;
+ if (nr==1)
+ tmp = (data->prochot_interval & 0xf0) >> 4;
+ else
+ tmp = data->prochot_interval & 0x0f;
+ return sprintf(buf,"%d\n",LM93_INTERVAL_FROM_REG(tmp));
+}
+
+static ssize_t store_prochot_interval(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+ u8 tmp;
+
+ mutex_lock(&data->update_lock);
+ tmp = lm93_read_byte(client, LM93_REG_PROCHOT_INTERVAL);
+ if (nr==1)
+ tmp = (tmp & 0x0f) | (LM93_INTERVAL_TO_REG(val) << 4);
+ else
+ tmp = (tmp & 0xf0) | LM93_INTERVAL_TO_REG(val);
+ data->prochot_interval = tmp;
+ lm93_write_byte(client, LM93_REG_PROCHOT_INTERVAL, tmp);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(prochot1_interval, S_IWUSR | S_IRUGO,
+ show_prochot_interval, store_prochot_interval, 0);
+static SENSOR_DEVICE_ATTR(prochot2_interval, S_IWUSR | S_IRUGO,
+ show_prochot_interval, store_prochot_interval, 1);
+
+static ssize_t show_prochot_override_duty_cycle(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",data->prochot_override & 0x0f);
+}
+
+static ssize_t store_prochot_override_duty_cycle(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->prochot_override = (data->prochot_override & 0xf0) |
+ SENSORS_LIMIT(val, 0, 15);
+ lm93_write_byte(client, LM93_REG_PROCHOT_OVERRIDE,
+ data->prochot_override);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static DEVICE_ATTR(prochot_override_duty_cycle, S_IRUGO | S_IWUSR,
+ show_prochot_override_duty_cycle,
+ store_prochot_override_duty_cycle);
+
+static ssize_t show_prochot_short(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",(data->config & 0x10) ? 1 : 0);
+}
+
+static ssize_t store_prochot_short(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm93_data *data = i2c_get_clientdata(client);
+ u32 val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ if (val)
+ data->config |= 0x10;
+ else
+ data->config &= ~0x10;
+ lm93_write_byte(client, LM93_REG_CONFIG, data->config);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static DEVICE_ATTR(prochot_short, S_IRUGO | S_IWUSR,
+ show_prochot_short, store_prochot_short);
+
+static ssize_t show_vrdhot(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = (to_sensor_dev_attr(attr))->index;
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",
+ data->block1.host_status_1 & (1 << (nr+4)) ? 1 : 0);
+}
+
+static SENSOR_DEVICE_ATTR(vrdhot1, S_IRUGO, show_vrdhot, NULL, 0);
+static SENSOR_DEVICE_ATTR(vrdhot2, S_IRUGO, show_vrdhot, NULL, 1);
+
+static ssize_t show_gpio(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_GPI_FROM_REG(data->gpi));
+}
+
+static DEVICE_ATTR(gpio, S_IRUGO, show_gpio, NULL);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lm93_data *data = lm93_update_device(dev);
+ return sprintf(buf,"%d\n",LM93_ALARMS_FROM_REG(data->block1));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static struct attribute *lm93_attrs[] = {
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in11_input.dev_attr.attr,
+ &sensor_dev_attr_in12_input.dev_attr.attr,
+ &sensor_dev_attr_in13_input.dev_attr.attr,
+ &sensor_dev_attr_in14_input.dev_attr.attr,
+ &sensor_dev_attr_in15_input.dev_attr.attr,
+ &sensor_dev_attr_in16_input.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in6_min.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in8_min.dev_attr.attr,
+ &sensor_dev_attr_in9_min.dev_attr.attr,
+ &sensor_dev_attr_in10_min.dev_attr.attr,
+ &sensor_dev_attr_in11_min.dev_attr.attr,
+ &sensor_dev_attr_in12_min.dev_attr.attr,
+ &sensor_dev_attr_in13_min.dev_attr.attr,
+ &sensor_dev_attr_in14_min.dev_attr.attr,
+ &sensor_dev_attr_in15_min.dev_attr.attr,
+ &sensor_dev_attr_in16_min.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in8_max.dev_attr.attr,
+ &sensor_dev_attr_in9_max.dev_attr.attr,
+ &sensor_dev_attr_in10_max.dev_attr.attr,
+ &sensor_dev_attr_in11_max.dev_attr.attr,
+ &sensor_dev_attr_in12_max.dev_attr.attr,
+ &sensor_dev_attr_in13_max.dev_attr.attr,
+ &sensor_dev_attr_in14_max.dev_attr.attr,
+ &sensor_dev_attr_in15_max.dev_attr.attr,
+ &sensor_dev_attr_in16_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_base.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_base.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_base.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_boost.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_boost.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_boost.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_boost_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_boost_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_boost_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset1.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset2.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset3.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset4.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset5.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset6.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset7.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset8.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset9.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset10.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset11.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset12.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset1.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset2.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset3.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset4.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset5.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset6.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset7.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset8.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset9.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset10.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset11.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset12.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset1.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset2.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset3.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset4.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset5.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset6.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset7.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset8.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset9.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset10.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset11.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset12.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_pwm_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_pwm_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_pwm_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_offset_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_offset_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_offset_hyst.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_smart_tach.dev_attr.attr,
+ &sensor_dev_attr_fan2_smart_tach.dev_attr.attr,
+ &sensor_dev_attr_fan3_smart_tach.dev_attr.attr,
+ &sensor_dev_attr_fan4_smart_tach.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channels.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_spinup_min.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_spinup_min.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_spinup_time.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_spinup_time.dev_attr.attr,
+ &dev_attr_pwm_auto_prochot_ramp.attr,
+ &dev_attr_pwm_auto_vrdhot_ramp.attr,
+ &sensor_dev_attr_vid1.dev_attr.attr,
+ &sensor_dev_attr_vid2.dev_attr.attr,
+ &sensor_dev_attr_prochot1.dev_attr.attr,
+ &sensor_dev_attr_prochot2.dev_attr.attr,
+ &sensor_dev_attr_prochot1_avg.dev_attr.attr,
+ &sensor_dev_attr_prochot2_avg.dev_attr.attr,
+ &sensor_dev_attr_prochot1_max.dev_attr.attr,
+ &sensor_dev_attr_prochot2_max.dev_attr.attr,
+ &sensor_dev_attr_prochot1_override.dev_attr.attr,
+ &sensor_dev_attr_prochot2_override.dev_attr.attr,
+ &sensor_dev_attr_prochot1_interval.dev_attr.attr,
+ &sensor_dev_attr_prochot2_interval.dev_attr.attr,
+ &dev_attr_prochot_override_duty_cycle.attr,
+ &dev_attr_prochot_short.attr,
+ &sensor_dev_attr_vrdhot1.dev_attr.attr,
+ &sensor_dev_attr_vrdhot2.dev_attr.attr,
+ &dev_attr_gpio.attr,
+ &dev_attr_alarms.attr,
+ NULL
+};
+
+static struct attribute_group lm93_attr_grp = {
+ .attrs = lm93_attrs,
+};
+
+static void lm93_init_client(struct i2c_client *client)
+{
+ int i;
+ u8 reg;
+
+ /* configure VID pin input thresholds */
+ reg = lm93_read_byte(client, LM93_REG_GPI_VID_CTL);
+ lm93_write_byte(client, LM93_REG_GPI_VID_CTL,
+ reg | (vid_agtl ? 0x03 : 0x00));
+
+ if (init) {
+ /* enable #ALERT pin */
+ reg = lm93_read_byte(client, LM93_REG_CONFIG);
+ lm93_write_byte(client, LM93_REG_CONFIG, reg | 0x08);
+
+ /* enable ASF mode for BMC status registers */
+ reg = lm93_read_byte(client, LM93_REG_STATUS_CONTROL);
+ lm93_write_byte(client, LM93_REG_STATUS_CONTROL, reg | 0x02);
+
+ /* set sleep state to S0 */
+ lm93_write_byte(client, LM93_REG_SLEEP_CONTROL, 0);
+
+ /* unmask #VRDHOT and dynamic VCCP (if nec) error events */
+ reg = lm93_read_byte(client, LM93_REG_MISC_ERR_MASK);
+ reg &= ~0x03;
+ reg &= ~(vccp_limit_type[0] ? 0x10 : 0);
+ reg &= ~(vccp_limit_type[1] ? 0x20 : 0);
+ lm93_write_byte(client, LM93_REG_MISC_ERR_MASK, reg);
+ }
+
+ /* start monitoring */
+ reg = lm93_read_byte(client, LM93_REG_CONFIG);
+ lm93_write_byte(client, LM93_REG_CONFIG, reg | 0x01);
+
+ /* spin until ready */
+ for (i=0; i<20; i++) {
+ msleep(10);
+ if ((lm93_read_byte(client, LM93_REG_CONFIG) & 0x80) == 0x80)
+ return;
+ }
+
+ dev_warn(&client->dev,"timed out waiting for sensor "
+ "chip to signal ready!\n");
+}
+
+static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct lm93_data *data;
+ struct i2c_client *client;
+
+ int err = -ENODEV, func;
+ void (*update)(struct lm93_data *, struct i2c_client *);
+
+ /* choose update routine based on bus capabilities */
+ func = i2c_get_functionality(adapter);
+ if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
+ (!disable_block) ) {
+ dev_dbg(&adapter->dev,"using SMBus block data transactions\n");
+ update = lm93_update_client_full;
+ } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
+ dev_dbg(&adapter->dev,"disabled SMBus block data "
+ "transactions\n");
+ update = lm93_update_client_min;
+ } else {
+ dev_dbg(&adapter->dev,"detect failed, "
+ "smbus byte and/or word data not supported!\n");
+ goto err_out;
+ }
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access lm78_{read,write}_value. */
+
+ if ( !(data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL))) {
+ dev_dbg(&adapter->dev,"out of memory!\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &lm93_driver;
+
+ /* detection */
+ if (kind < 0) {
+ int mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
+
+ if (mfr != 0x01) {
+ dev_dbg(&adapter->dev,"detect failed, "
+ "bad manufacturer id 0x%02x!\n", mfr);
+ goto err_free;
+ }
+ }
+
+ if (kind <= 0) {
+ int ver = lm93_read_byte(client, LM93_REG_VER);
+
+ if ((ver == LM93_MFR_ID) || (ver == LM93_MFR_ID_PROTOTYPE)) {
+ kind = lm93;
+ } else {
+ dev_dbg(&adapter->dev,"detect failed, "
+ "bad version id 0x%02x!\n", ver);
+ if (kind == 0)
+ dev_dbg(&adapter->dev,
+ "(ignored 'force' parameter)\n");
+ goto err_free;
+ }
+ }
+
+ /* fill in remaining client fields */
+ strlcpy(client->name, "lm93", I2C_NAME_SIZE);
+ dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
+ client->name, i2c_adapter_id(client->adapter),
+ client->addr);
+
+ /* housekeeping */
+ data->valid = 0;
+ data->update = update;
+ mutex_init(&data->update_lock);
+
+ /* tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto err_free;
+
+ /* initialize the chip */
+ lm93_init_client(client);
+
+ err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp);
+ if (err)
+ goto err_detach;
+
+ /* Register hwmon driver class */
+ data->class_dev = hwmon_device_register(&client->dev);
+ if ( !IS_ERR(data->class_dev))
+ return 0;
+
+ err = PTR_ERR(data->class_dev);
+ dev_err(&client->dev, "error registering hwmon device.\n");
+ sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
+err_detach:
+ i2c_detach_client(client);
+err_free:
+ kfree(data);
+err_out:
+ return err;
+}
+
+/* This function is called when:
+ * lm93_driver is inserted (when this module is loaded), for each
+ available adapter
+ * when a new adapter is inserted (and lm93_driver is still present) */
+static int lm93_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, lm93_detect);
+}
+
+static int lm93_detach_client(struct i2c_client *client)
+{
+ struct lm93_data *data = i2c_get_clientdata(client);
+ int err = 0;
+
+ hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
+
+ err = i2c_detach_client(client);
+ if (!err)
+ kfree(data);
+ return err;
+}
+
+static struct i2c_driver lm93_driver = {
+ .driver = {
+ .name = "lm93",
+ },
+ .attach_adapter = lm93_attach_adapter,
+ .detach_client = lm93_detach_client,
+};
+
+static int __init lm93_init(void)
+{
+ return i2c_add_driver(&lm93_driver);
+}
+
+static void __exit lm93_exit(void)
+{
+ i2c_del_driver(&lm93_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
+ "Hans J. Koch <hjk@linutronix.de");
+MODULE_DESCRIPTION("LM93 driver");
+MODULE_LICENSE("GPL");
+
+module_init(lm93_init);
+module_exit(lm93_exit);
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index c8a21be09d8..cb72526c346 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1,7 +1,7 @@
/*
* pc87360.c - Part of lm_sensors, Linux kernel modules
* for hardware monitoring
- * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004, 2007 Jean Delvare <khali@linux-fr.org>
*
* Copied from smsc47m1.c:
* Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
@@ -37,8 +37,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
@@ -47,12 +46,10 @@
#include <asm/io.h>
static u8 devid;
-static unsigned short address;
+static struct platform_device *pdev;
static unsigned short extra_isa[3];
static u8 confreg[4];
-enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 };
-
static int init = 1;
module_param(init, int, 0);
MODULE_PARM_DESC(init,
@@ -178,11 +175,11 @@ static inline u8 PWM_TO_REG(int val, int inv)
((val) + 500) / 1000)
/*
- * Client data (each client gets its own)
+ * Device data
*/
struct pc87360_data {
- struct i2c_client client;
+ const char *name;
struct class_device *class_dev;
struct mutex lock;
struct mutex update_lock;
@@ -222,27 +219,28 @@ struct pc87360_data {
* Functions declaration
*/
-static int pc87360_detect(struct i2c_adapter *adapter);
-static int pc87360_detach_client(struct i2c_client *client);
+static int pc87360_probe(struct platform_device *pdev);
+static int pc87360_remove(struct platform_device *pdev);
static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg);
static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg, u8 value);
-static void pc87360_init_client(struct i2c_client *client, int use_thermistors);
+static void pc87360_init_device(struct platform_device *pdev,
+ int use_thermistors);
static struct pc87360_data *pc87360_update_device(struct device *dev);
/*
- * Driver data (common to all clients)
+ * Driver data
*/
-static struct i2c_driver pc87360_driver = {
+static struct platform_driver pc87360_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "pc87360",
},
- .attach_adapter = pc87360_detect,
- .detach_client = pc87360_detach_client,
+ .probe = pc87360_probe,
+ .remove = __devexit_p(pc87360_remove),
};
/*
@@ -281,8 +279,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr,
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long fan_min = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -347,8 +344,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, con
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -410,8 +406,7 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr,
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -425,8 +420,7 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr,
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -511,8 +505,7 @@ static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char
}
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
data->vrm = simple_strtoul(buf, NULL, 10);
return count;
}
@@ -584,8 +577,7 @@ static ssize_t set_therm_min(struct device *dev, struct device_attribute *devatt
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -599,8 +591,7 @@ static ssize_t set_therm_max(struct device *dev, struct device_attribute *devatt
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -614,8 +605,7 @@ static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devat
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -715,8 +705,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -730,8 +719,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -745,8 +733,7 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devatt
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -818,6 +805,14 @@ static const struct attribute_group pc8736x_temp_group = {
.attrs = pc8736x_temp_attr_array,
};
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87360_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
/*
* Device detection, registration and update
*/
@@ -912,28 +907,18 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
return 0;
}
-static int pc87360_detect(struct i2c_adapter *adapter)
+static int __devinit pc87360_probe(struct platform_device *pdev)
{
int i;
- struct i2c_client *client;
struct pc87360_data *data;
int err = 0;
const char *name = "pc87360";
int use_thermistors = 0;
- struct device *dev;
+ struct device *dev = &pdev->dev;
if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
return -ENOMEM;
- client = &data->client;
- dev = &client->dev;
- i2c_set_clientdata(client, data);
- client->addr = address;
- mutex_init(&data->lock);
- client->adapter = adapter;
- client->driver = &pc87360_driver;
- client->flags = 0;
-
data->fannr = 2;
data->innr = 0;
data->tempnr = 0;
@@ -960,15 +945,17 @@ static int pc87360_detect(struct i2c_adapter *adapter)
break;
}
- strlcpy(client->name, name, sizeof(client->name));
+ data->name = name;
data->valid = 0;
+ mutex_init(&data->lock);
mutex_init(&data->update_lock);
+ platform_set_drvdata(pdev, data);
for (i = 0; i < 3; i++) {
if (((data->address[i] = extra_isa[i]))
&& !request_region(extra_isa[i], PC87360_EXTENT,
pc87360_driver.driver.name)) {
- dev_err(&client->dev, "Region 0x%x-0x%x already "
+ dev_err(dev, "Region 0x%x-0x%x already "
"in use!\n", extra_isa[i],
extra_isa[i]+PC87360_EXTENT-1);
for (i--; i >= 0; i--)
@@ -982,9 +969,6 @@ static int pc87360_detect(struct i2c_adapter *adapter)
if (data->fannr)
data->fan_conf = confreg[0] | (confreg[1] << 8);
- if ((err = i2c_attach_client(client)))
- goto ERROR2;
-
/* Use the correct reference voltage
Unless both the VLM and the TMS logical devices agree to
use an external Vref, the internal one is used. */
@@ -996,7 +980,7 @@ static int pc87360_detect(struct i2c_adapter *adapter)
PC87365_REG_TEMP_CONFIG);
}
data->in_vref = (i&0x02) ? 3025 : 2966;
- dev_dbg(&client->dev, "Using %s reference voltage\n",
+ dev_dbg(dev, "Using %s reference voltage\n",
(i&0x02) ? "external" : "internal");
data->vid_conf = confreg[3];
@@ -1015,18 +999,18 @@ static int pc87360_detect(struct i2c_adapter *adapter)
if (devid == 0xe9 && data->address[1]) /* PC87366 */
use_thermistors = confreg[2] & 0x40;
- pc87360_init_client(client, use_thermistors);
+ pc87360_init_device(pdev, use_thermistors);
}
/* Register all-or-nothing sysfs groups */
if (data->innr &&
- (err = sysfs_create_group(&client->dev.kobj,
+ (err = sysfs_create_group(&dev->kobj,
&pc8736x_vin_group)))
goto ERROR3;
if (data->innr == 14 &&
- (err = sysfs_create_group(&client->dev.kobj,
+ (err = sysfs_create_group(&dev->kobj,
&pc8736x_therm_group)))
goto ERROR3;
@@ -1067,7 +1051,10 @@ static int pc87360_detect(struct i2c_adapter *adapter)
goto ERROR3;
}
- data->class_dev = hwmon_device_register(&client->dev);
+ if ((err = device_create_file(dev, &dev_attr_name)))
+ goto ERROR3;
+
+ data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR3;
@@ -1075,14 +1062,12 @@ static int pc87360_detect(struct i2c_adapter *adapter)
return 0;
ERROR3:
+ device_remove_file(dev, &dev_attr_name);
/* can still remove groups whose members were added individually */
- sysfs_remove_group(&client->dev.kobj, &pc8736x_temp_group);
- sysfs_remove_group(&client->dev.kobj, &pc8736x_fan_group);
- sysfs_remove_group(&client->dev.kobj, &pc8736x_therm_group);
- sysfs_remove_group(&client->dev.kobj, &pc8736x_vin_group);
-
- i2c_detach_client(client);
-ERROR2:
+ sysfs_remove_group(&dev->kobj, &pc8736x_temp_group);
+ sysfs_remove_group(&dev->kobj, &pc8736x_fan_group);
+ sysfs_remove_group(&dev->kobj, &pc8736x_therm_group);
+ sysfs_remove_group(&dev->kobj, &pc8736x_vin_group);
for (i = 0; i < 3; i++) {
if (data->address[i]) {
release_region(data->address[i], PC87360_EXTENT);
@@ -1093,20 +1078,18 @@ ERROR1:
return err;
}
-static int pc87360_detach_client(struct i2c_client *client)
+static int __devexit pc87360_remove(struct platform_device *pdev)
{
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = platform_get_drvdata(pdev);
int i;
hwmon_device_unregister(data->class_dev);
- sysfs_remove_group(&client->dev.kobj, &pc8736x_temp_group);
- sysfs_remove_group(&client->dev.kobj, &pc8736x_fan_group);
- sysfs_remove_group(&client->dev.kobj, &pc8736x_therm_group);
- sysfs_remove_group(&client->dev.kobj, &pc8736x_vin_group);
-
- if ((i = i2c_detach_client(client)))
- return i;
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ sysfs_remove_group(&pdev->dev.kobj, &pc8736x_temp_group);
+ sysfs_remove_group(&pdev->dev.kobj, &pc8736x_fan_group);
+ sysfs_remove_group(&pdev->dev.kobj, &pc8736x_therm_group);
+ sysfs_remove_group(&pdev->dev.kobj, &pc8736x_vin_group);
for (i = 0; i < 3; i++) {
if (data->address[i]) {
@@ -1144,9 +1127,10 @@ static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
mutex_unlock(&(data->lock));
}
-static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
+static void pc87360_init_device(struct platform_device *pdev,
+ int use_thermistors)
{
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = platform_get_drvdata(pdev);
int i, nr;
const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 };
const u8 init_temp[3] = { 2, 2, 1 };
@@ -1155,7 +1139,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
if (init >= 2 && data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE);
- dev_info(&client->dev, "VLM conversion set to "
+ dev_info(&pdev->dev, "VLM conversion set to "
"1s period, 160us delay\n");
pc87360_write_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE,
@@ -1169,7 +1153,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
if (!(reg & 0x01)) {
- dev_dbg(&client->dev, "Forcibly "
+ dev_dbg(&pdev->dev, "Forcibly "
"enabling in%d\n", i);
pc87360_write_value(data, LD_IN, i,
PC87365_REG_IN_STATUS,
@@ -1193,7 +1177,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
reg = pc87360_read_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS);
if (!(reg & 0x01)) {
- dev_dbg(&client->dev, "Forcibly "
+ dev_dbg(&pdev->dev, "Forcibly "
"enabling temp%d\n", i+1);
pc87360_write_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS,
@@ -1210,7 +1194,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
reg = pc87360_read_value(data, LD_TEMP,
(i-11)/2, PC87365_REG_TEMP_STATUS);
if (reg & 0x01) {
- dev_dbg(&client->dev, "Skipping "
+ dev_dbg(&pdev->dev, "Skipping "
"temp%d, pin already in use "
"by temp%d\n", i-7, (i-11)/2);
continue;
@@ -1220,7 +1204,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
if (!(reg & 0x01)) {
- dev_dbg(&client->dev, "Forcibly "
+ dev_dbg(&pdev->dev, "Forcibly "
"enabling temp%d\n", i-7);
pc87360_write_value(data, LD_IN, i,
PC87365_REG_TEMP_STATUS,
@@ -1234,7 +1218,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONFIG);
if (reg & 0x01) {
- dev_dbg(&client->dev, "Forcibly "
+ dev_dbg(&pdev->dev, "Forcibly "
"enabling monitoring (VLM)\n");
pc87360_write_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONFIG,
@@ -1246,7 +1230,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
PC87365_REG_TEMP_CONFIG);
if (reg & 0x01) {
- dev_dbg(&client->dev, "Forcibly enabling "
+ dev_dbg(&pdev->dev, "Forcibly enabling "
"monitoring (TMS)\n");
pc87360_write_value(data, LD_TEMP, NO_BANK,
PC87365_REG_TEMP_CONFIG,
@@ -1268,9 +1252,9 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
}
}
-static void pc87360_autodiv(struct i2c_client *client, int nr)
+static void pc87360_autodiv(struct device *dev, int nr)
{
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
u8 old_min = data->fan_min[nr];
/* Increase clock divider if needed and possible */
@@ -1280,7 +1264,7 @@ static void pc87360_autodiv(struct i2c_client *client, int nr)
data->fan_status[nr] += 0x20;
data->fan_min[nr] >>= 1;
data->fan[nr] >>= 1;
- dev_dbg(&client->dev, "Increasing "
+ dev_dbg(dev, "Increasing "
"clock divider to %d for fan %d\n",
FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1);
}
@@ -1292,7 +1276,7 @@ static void pc87360_autodiv(struct i2c_client *client, int nr)
data->fan_status[nr] -= 0x20;
data->fan_min[nr] <<= 1;
data->fan[nr] <<= 1;
- dev_dbg(&client->dev, "Decreasing "
+ dev_dbg(dev, "Decreasing "
"clock divider to %d for fan %d\n",
FAN_DIV_FROM_REG(data->fan_status[nr]),
nr+1);
@@ -1309,14 +1293,13 @@ static void pc87360_autodiv(struct i2c_client *client, int nr)
static struct pc87360_data *pc87360_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct pc87360_data *data = i2c_get_clientdata(client);
+ struct pc87360_data *data = dev_get_drvdata(dev);
u8 i;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
- dev_dbg(&client->dev, "Data update\n");
+ dev_dbg(dev, "Data update\n");
/* Fans */
for (i = 0; i < data->fannr; i++) {
@@ -1330,7 +1313,7 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
LD_FAN, NO_BANK,
PC87360_REG_FAN_MIN(i));
/* Change clock divider if needed */
- pc87360_autodiv(client, i);
+ pc87360_autodiv(dev, i);
/* Clear bits and write new divider */
pc87360_write_value(data, LD_FAN, NO_BANK,
PC87360_REG_FAN_STATUS(i),
@@ -1418,9 +1401,53 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
return data;
}
+static int __init pc87360_device_add(unsigned short address)
+{
+ struct resource res = {
+ .name = "pc87360",
+ .flags = IORESOURCE_IO,
+ };
+ int err, i;
+
+ pdev = platform_device_alloc("pc87360", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "pc87360: Device allocation failed\n");
+ goto exit;
+ }
+
+ for (i = 0; i < 3; i++) {
+ if (!extra_isa[i])
+ continue;
+ res.start = extra_isa[i];
+ res.end = extra_isa[i] + PC87360_EXTENT - 1;
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "pc87360: Device resource[%d] "
+ "addition failed (%d)\n", i, err);
+ goto exit_device_put;
+ }
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "pc87360: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __init pc87360_init(void)
{
- int i;
+ int err, i;
+ unsigned short address = 0;
if (pc87360_find(0x2e, &devid, extra_isa)
&& pc87360_find(0x4e, &devid, extra_isa)) {
@@ -1443,12 +1470,27 @@ static int __init pc87360_init(void)
return -ENODEV;
}
- return i2c_isa_add_driver(&pc87360_driver);
+ err = platform_driver_register(&pc87360_driver);
+ if (err)
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ err = pc87360_device_add(address);
+ if (err)
+ goto exit_driver;
+
+ return 0;
+
+ exit_driver:
+ platform_driver_unregister(&pc87360_driver);
+ exit:
+ return err;
}
static void __exit pc87360_exit(void)
{
- i2c_isa_del_driver(&pc87360_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&pc87360_driver);
}
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
index 29354fa26f8..2915bc4ad0d 100644
--- a/drivers/hwmon/pc87427.c
+++ b/drivers/hwmon/pc87427.c
@@ -484,7 +484,6 @@ static int __devexit pc87427_remove(struct platform_device *pdev)
struct resource *res;
int i;
- platform_set_drvdata(pdev, NULL);
hwmon_device_unregister(data->class_dev);
device_remove_file(&pdev->dev, &dev_attr_name);
for (i = 0; i < 8; i++) {
@@ -492,6 +491,7 @@ static int __devexit pc87427_remove(struct platform_device *pdev)
continue;
sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
}
+ platform_set_drvdata(pdev, NULL);
kfree(data);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 3f400263fc0..83321b28cf0 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -54,9 +54,9 @@
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
@@ -72,17 +72,13 @@ module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
-/* Device address
- Note that we can't determine the ISA address until we have initialized
- our module */
-static unsigned short address;
+static struct platform_device *pdev;
/* Many SIS5595 constants specified below */
/* Length of ISA address segment */
#define SIS5595_EXTENT 8
/* PCI Config Registers */
-#define SIS5595_REVISION_REG 0x08
#define SIS5595_BASE_REG 0x68
#define SIS5595_PIN_REG 0x7A
#define SIS5595_ENABLE_REG 0x7B
@@ -165,7 +161,8 @@ static inline u8 DIV_TO_REG(int val)
/* For each registered chip, we need to keep some data in memory.
The structure is dynamically allocated. */
struct sis5595_data {
- struct i2c_client client;
+ unsigned short addr;
+ const char *name;
struct class_device *class_dev;
struct mutex lock;
@@ -189,102 +186,88 @@ struct sis5595_data {
static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */
-static int sis5595_detect(struct i2c_adapter *adapter);
-static int sis5595_detach_client(struct i2c_client *client);
+static int sis5595_probe(struct platform_device *pdev);
+static int sis5595_remove(struct platform_device *pdev);
-static int sis5595_read_value(struct i2c_client *client, u8 reg);
-static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value);
+static int sis5595_read_value(struct sis5595_data *data, u8 reg);
+static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);
static struct sis5595_data *sis5595_update_device(struct device *dev);
-static void sis5595_init_client(struct i2c_client *client);
+static void sis5595_init_device(struct sis5595_data *data);
-static struct i2c_driver sis5595_driver = {
+static struct platform_driver sis5595_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "sis5595",
},
- .attach_adapter = sis5595_detect,
- .detach_client = sis5595_detach_client,
+ .probe = sis5595_probe,
+ .remove = __devexit_p(sis5595_remove),
};
/* 4 Voltages */
-static ssize_t show_in(struct device *dev, char *buf, int nr)
+static ssize_t show_in(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
}
-static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+static ssize_t show_in_min(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
}
-static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+static ssize_t show_in_max(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
}
-static ssize_t set_in_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
+ sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_in_max(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
+ sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_in_offset(offset) \
-static ssize_t \
- show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
- show_in##offset, NULL); \
-static ssize_t \
- show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_min(dev, buf, offset); \
-} \
-static ssize_t \
- show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_max(dev, buf, offset); \
-} \
-static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_min(dev, buf, count, offset); \
-} \
-static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_max(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in##offset##_max, set_in##offset##_max);
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset);
show_in_offset(0);
show_in_offset(1);
@@ -307,13 +290,12 @@ static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr,
static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_over = TEMP_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over);
+ sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over);
mutex_unlock(&data->update_lock);
return count;
}
@@ -326,13 +308,12 @@ static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr,
static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_hyst = TEMP_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst);
+ sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst);
mutex_unlock(&data->update_lock);
return count;
}
@@ -344,37 +325,47 @@ static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
show_temp_hyst, set_temp_hyst);
/* 2 Fans */
-static ssize_t show_fan(struct device *dev, char *buf, int nr)
+static ssize_t show_fan(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
DIV_FROM_REG(data->fan_div[nr])) );
}
-static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr])) );
}
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+ sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
+ char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
}
@@ -382,11 +373,12 @@ static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
determined in part by the fan divisor. This follows the principle of
least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
-static ssize_t set_fan_div(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
unsigned long min;
unsigned long val = simple_strtoul(buf, NULL, 10);
int reg;
@@ -394,7 +386,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf,
mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
- reg = sis5595_read_value(client, SIS5595_REG_FANDIV);
+ reg = sis5595_read_value(data, SIS5595_REG_FANDIV);
switch (val) {
case 1: data->fan_div[nr] = 0; break;
@@ -402,7 +394,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf,
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
- dev_err(&client->dev, "fan_div value %ld not "
+ dev_err(dev, "fan_div value %ld not "
"supported. Choose one of 1, 2, 4 or 8!\n", val);
mutex_unlock(&data->update_lock);
return -EINVAL;
@@ -416,55 +408,25 @@ static ssize_t set_fan_div(struct device *dev, const char *buf,
reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
break;
}
- sis5595_write_value(client, SIS5595_REG_FANDIV, reg);
+ sis5595_write_value(data, SIS5595_REG_FANDIV, reg);
data->fan_min[nr] =
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+ sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_fan_offset(offset) \
-static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_min(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_div(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_min(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_min, set_fan_##offset##_min);
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1);
show_fan_offset(1);
show_fan_offset(2);
-static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf,
- size_t count)
-{
- return set_fan_div(dev, buf, count, 0) ;
-}
-
-static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf,
- size_t count)
-{
- return set_fan_div(dev, buf, count, 1) ;
-}
-static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
- show_fan_1_div, set_fan_1_div);
-static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
- show_fan_2_div, set_fan_2_div);
-
/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -473,28 +435,37 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sis5595_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
static struct attribute *sis5595_attributes[] = {
- &dev_attr_in0_input.attr,
- &dev_attr_in0_min.attr,
- &dev_attr_in0_max.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in1_min.attr,
- &dev_attr_in1_max.attr,
- &dev_attr_in2_input.attr,
- &dev_attr_in2_min.attr,
- &dev_attr_in2_max.attr,
- &dev_attr_in3_input.attr,
- &dev_attr_in3_min.attr,
- &dev_attr_in3_max.attr,
-
- &dev_attr_fan1_input.attr,
- &dev_attr_fan1_min.attr,
- &dev_attr_fan1_div.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan2_min.attr,
- &dev_attr_fan2_div.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_div.dev_attr.attr,
&dev_attr_alarms.attr,
+ &dev_attr_name.attr,
NULL
};
@@ -503,9 +474,9 @@ static const struct attribute_group sis5595_group = {
};
static struct attribute *sis5595_attributes_opt[] = {
- &dev_attr_in4_input.attr,
- &dev_attr_in4_min.attr,
- &dev_attr_in4_max.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
&dev_attr_temp1_input.attr,
&dev_attr_temp1_max.attr,
@@ -518,68 +489,35 @@ static const struct attribute_group sis5595_group_opt = {
};
/* This is called when the module is loaded */
-static int sis5595_detect(struct i2c_adapter *adapter)
+static int __devinit sis5595_probe(struct platform_device *pdev)
{
int err = 0;
int i;
- struct i2c_client *new_client;
struct sis5595_data *data;
+ struct resource *res;
char val;
- u16 a;
- if (force_addr)
- address = force_addr & ~(SIS5595_EXTENT - 1);
/* Reserve the ISA region */
- if (!request_region(address, SIS5595_EXTENT,
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, SIS5595_EXTENT,
sis5595_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
- if (force_addr) {
- dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address);
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, SIS5595_BASE_REG, address))
- goto exit_release;
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a))
- goto exit_release;
- if ((a & ~(SIS5595_EXTENT - 1)) != address)
- /* doesn't work for some chips? */
- goto exit_release;
- }
-
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) {
- goto exit_release;
- }
- if ((val & 0x80) == 0) {
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG,
- val | 0x80))
- goto exit_release;
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val))
- goto exit_release;
- if ((val & 0x80) == 0)
- /* doesn't work for some chips! */
- goto exit_release;
- }
if (!(data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- new_client = &data->client;
- new_client->addr = address;
mutex_init(&data->lock);
- i2c_set_clientdata(new_client, data);
- new_client->adapter = adapter;
- new_client->driver = &sis5595_driver;
- new_client->flags = 0;
+ mutex_init(&data->update_lock);
+ data->addr = res->start;
+ data->name = "sis5595";
+ platform_set_drvdata(pdev, data);
/* Check revision and pin registers to determine whether 4 or 5 voltages */
- pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision));
+ pci_read_config_byte(s_bridge, PCI_REVISION_ID, &data->revision);
/* 4 voltages, 1 temp */
data->maxins = 3;
if (data->revision >= REV2MIN) {
@@ -589,47 +527,37 @@ static int sis5595_detect(struct i2c_adapter *adapter)
data->maxins = 4;
}
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE);
-
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the SIS5595 chip */
- sis5595_init_client(new_client);
+ sis5595_init_device(data);
/* A few vars need to be filled upon startup */
for (i = 0; i < 2; i++) {
- data->fan_min[i] = sis5595_read_value(new_client,
+ data->fan_min[i] = sis5595_read_value(data,
SIS5595_REG_FAN_MIN(i));
}
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &sis5595_group)))
- goto exit_detach;
+ if ((err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group)))
+ goto exit_free;
if (data->maxins == 4) {
- if ((err = device_create_file(&new_client->dev,
- &dev_attr_in4_input))
- || (err = device_create_file(&new_client->dev,
- &dev_attr_in4_min))
- || (err = device_create_file(&new_client->dev,
- &dev_attr_in4_max)))
+ if ((err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_in4_input.dev_attr))
+ || (err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_in4_min.dev_attr))
+ || (err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_in4_max.dev_attr)))
goto exit_remove_files;
} else {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(&pdev->dev,
&dev_attr_temp1_input))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(&pdev->dev,
&dev_attr_temp1_max))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(&pdev->dev,
&dev_attr_temp1_max_hyst)))
goto exit_remove_files;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -638,32 +566,26 @@ static int sis5595_detect(struct i2c_adapter *adapter)
return 0;
exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &sis5595_group);
- sysfs_remove_group(&new_client->dev.kobj, &sis5595_group_opt);
-exit_detach:
- i2c_detach_client(new_client);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_opt);
exit_free:
kfree(data);
exit_release:
- release_region(address, SIS5595_EXTENT);
+ release_region(res->start, SIS5595_EXTENT);
exit:
return err;
}
-static int sis5595_detach_client(struct i2c_client *client)
+static int __devexit sis5595_remove(struct platform_device *pdev)
{
- struct sis5595_data *data = i2c_get_clientdata(client);
- int err;
+ struct sis5595_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->class_dev);
- sysfs_remove_group(&client->dev.kobj, &sis5595_group);
- sysfs_remove_group(&client->dev.kobj, &sis5595_group_opt);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- release_region(client->addr, SIS5595_EXTENT);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_opt);
+ release_region(data->addr, SIS5595_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
@@ -671,41 +593,37 @@ static int sis5595_detach_client(struct i2c_client *client)
/* ISA access must be locked explicitly. */
-static int sis5595_read_value(struct i2c_client *client, u8 reg)
+static int sis5595_read_value(struct sis5595_data *data, u8 reg)
{
int res;
- struct sis5595_data *data = i2c_get_clientdata(client);
mutex_lock(&data->lock);
- outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
- res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET);
+ outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
+ res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET);
mutex_unlock(&data->lock);
return res;
}
-static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value)
{
- struct sis5595_data *data = i2c_get_clientdata(client);
mutex_lock(&data->lock);
- outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
- outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET);
+ outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
+ outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET);
mutex_unlock(&data->lock);
- return 0;
}
/* Called when we have found a new SIS5595. */
-static void sis5595_init_client(struct i2c_client *client)
+static void __devinit sis5595_init_device(struct sis5595_data *data)
{
- u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG);
+ u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
if (!(config & 0x01))
- sis5595_write_value(client, SIS5595_REG_CONFIG,
+ sis5595_write_value(data, SIS5595_REG_CONFIG,
(config & 0xf7) | 0x01);
}
static struct sis5595_data *sis5595_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
int i;
mutex_lock(&data->update_lock);
@@ -715,35 +633,35 @@ static struct sis5595_data *sis5595_update_device(struct device *dev)
for (i = 0; i <= data->maxins; i++) {
data->in[i] =
- sis5595_read_value(client, SIS5595_REG_IN(i));
+ sis5595_read_value(data, SIS5595_REG_IN(i));
data->in_min[i] =
- sis5595_read_value(client,
+ sis5595_read_value(data,
SIS5595_REG_IN_MIN(i));
data->in_max[i] =
- sis5595_read_value(client,
+ sis5595_read_value(data,
SIS5595_REG_IN_MAX(i));
}
for (i = 0; i < 2; i++) {
data->fan[i] =
- sis5595_read_value(client, SIS5595_REG_FAN(i));
+ sis5595_read_value(data, SIS5595_REG_FAN(i));
data->fan_min[i] =
- sis5595_read_value(client,
+ sis5595_read_value(data,
SIS5595_REG_FAN_MIN(i));
}
if (data->maxins == 3) {
data->temp =
- sis5595_read_value(client, SIS5595_REG_TEMP);
+ sis5595_read_value(data, SIS5595_REG_TEMP);
data->temp_over =
- sis5595_read_value(client, SIS5595_REG_TEMP_OVER);
+ sis5595_read_value(data, SIS5595_REG_TEMP_OVER);
data->temp_hyst =
- sis5595_read_value(client, SIS5595_REG_TEMP_HYST);
+ sis5595_read_value(data, SIS5595_REG_TEMP_HYST);
}
- i = sis5595_read_value(client, SIS5595_REG_FANDIV);
+ i = sis5595_read_value(data, SIS5595_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
data->alarms =
- sis5595_read_value(client, SIS5595_REG_ALARM1) |
- (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8);
+ sis5595_read_value(data, SIS5595_REG_ALARM1) |
+ (sis5595_read_value(data, SIS5595_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
}
@@ -774,10 +692,50 @@ static int blacklist[] __devinitdata = {
PCI_DEVICE_ID_SI_5598,
0 };
+static int __devinit sis5595_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + SIS5595_EXTENT - 1,
+ .name = "sis5595",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc("sis5595", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "sis5595: Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "sis5595: Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "sis5595: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __devinit sis5595_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
- u16 val;
+ u16 address;
+ u8 enable;
int *i;
for (i = blacklist; *i != 0; i++) {
@@ -790,27 +748,68 @@ static int __devinit sis5595_pci_probe(struct pci_dev *dev,
}
}
+ force_addr &= ~(SIS5595_EXTENT - 1);
+ if (force_addr) {
+ dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr);
+ pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
+ }
+
if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(dev, SIS5595_BASE_REG, &val))
+ pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
+ dev_err(&dev->dev, "Failed to read ISA address\n");
return -ENODEV;
+ }
- address = val & ~(SIS5595_EXTENT - 1);
- if (address == 0 && force_addr == 0) {
+ address &= ~(SIS5595_EXTENT - 1);
+ if (!address) {
dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
+ if (force_addr && address != force_addr) {
+ /* doesn't work for some chips? */
+ dev_err(&dev->dev, "Failed to force ISA address\n");
+ return -ENODEV;
+ }
- s_bridge = pci_dev_get(dev);
- if (i2c_isa_add_driver(&sis5595_driver)) {
- pci_dev_put(s_bridge);
- s_bridge = NULL;
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
+ dev_err(&dev->dev, "Failed to read enable register\n");
+ return -ENODEV;
+ }
+ if (!(enable & 0x80)) {
+ if ((PCIBIOS_SUCCESSFUL !=
+ pci_write_config_byte(dev, SIS5595_ENABLE_REG,
+ enable | 0x80))
+ || (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
+ || (!(enable & 0x80))) {
+ /* doesn't work for some chips! */
+ dev_err(&dev->dev, "Failed to enable HWM device\n");
+ return -ENODEV;
+ }
}
+ if (platform_driver_register(&sis5595_driver)) {
+ dev_dbg(&dev->dev, "Failed to register sis5595 driver\n");
+ goto exit;
+ }
+
+ s_bridge = pci_dev_get(dev);
+ /* Sets global pdev as a side effect */
+ if (sis5595_device_add(address))
+ goto exit_unregister;
+
/* Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
return -ENODEV;
+
+exit_unregister:
+ pci_dev_put(dev);
+ platform_driver_unregister(&sis5595_driver);
+exit:
+ return -ENODEV;
}
static struct pci_driver sis5595_pci_driver = {
@@ -828,7 +827,8 @@ static void __exit sm_sis5595_exit(void)
{
pci_unregister_driver(&sis5595_pci_driver);
if (s_bridge != NULL) {
- i2c_isa_del_driver(&sis5595_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&sis5595_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 943abbd95ab..45266b30ce1 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -174,6 +174,8 @@ static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
REG: count of 90kHz pulses / revolution */
static int fan_from_reg(u16 reg)
{
+ if (reg == 0 || reg == 0xffff)
+ return 0;
return 90000 * 60 / reg;
}
@@ -333,7 +335,7 @@ static int __init smsc47b397_find(unsigned short *addr)
superio_enter();
id = superio_inb(SUPERIO_REG_DEVID);
- if ((id != 0x6f) && (id != 0x81)) {
+ if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) {
superio_exit();
return -ENODEV;
}
@@ -346,7 +348,8 @@ static int __init smsc47b397_find(unsigned short *addr)
printk(KERN_INFO DRVNAME ": found SMSC %s "
"(base address 0x%04x, revision %u)\n",
- id == 0x81 ? "SCH5307-NS" : "LPC47B397-NC", *addr, rev);
+ id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" :
+ "LPC47B397-NC", *addr, rev);
superio_exit();
return 0;
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 1e21c8cc948..1de2f2be870 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -597,6 +597,7 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
error_remove_files:
sysfs_remove_group(&dev->kobj, &smsc47m1_group);
error_free:
+ platform_set_drvdata(pdev, NULL);
kfree(data);
error_release:
release_region(res->start, SMSC_EXTENT);
@@ -608,12 +609,12 @@ static int __devexit smsc47m1_remove(struct platform_device *pdev)
struct smsc47m1_data *data = platform_get_drvdata(pdev);
struct resource *res;
- platform_set_drvdata(pdev, NULL);
hwmon_device_unregister(data->class_dev);
sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
release_region(res->start, SMSC_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
@@ -693,15 +694,12 @@ static int __init smsc47m1_device_add(unsigned short address,
goto exit_device_put;
}
- pdev->dev.platform_data = kmalloc(sizeof(struct smsc47m1_sio_data),
- GFP_KERNEL);
- if (!pdev->dev.platform_data) {
- err = -ENOMEM;
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct smsc47m1_sio_data));
+ if (err) {
printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
goto exit_device_put;
}
- memcpy(pdev->dev.platform_data, sio_data,
- sizeof(struct smsc47m1_sio_data));
err = platform_device_add(pdev);
if (err) {
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index a012f396f35..d3a3ba04cb0 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -31,6 +31,7 @@
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/sysfs.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
@@ -97,7 +98,7 @@ static inline int TEMP_FROM_REG(s8 val)
struct smsc47m192_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -164,11 +165,11 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, nr);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_IN_MIN(nr),
data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -181,11 +182,11 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, nr);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_IN_MAX(nr),
data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -243,11 +244,11 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_TEMP_MIN[nr],
data->temp_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -260,11 +261,11 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_TEMP_MAX[nr],
data->temp_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -287,7 +288,7 @@ static ssize_t set_temp_offset(struct device *dev, struct device_attribute
u8 sfr = i2c_smbus_read_byte_data(client, SMSC47M192_REG_SFR);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_offset[nr] = TEMP_TO_REG(val);
if (nr>1)
i2c_smbus_write_byte_data(client,
@@ -303,7 +304,7 @@ static ssize_t set_temp_offset(struct device *dev, struct device_attribute
} else if ((sfr & 0x10) == (nr==0 ? 0x10 : 0))
i2c_smbus_write_byte_data(client,
SMSC47M192_REG_TEMP_OFFSET(nr), 0);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -360,8 +361,8 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0x0010);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 0x0020);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 0x0040);
-static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 0x4000);
-static SENSOR_DEVICE_ATTR(temp3_input_fault, S_IRUGO, show_alarm, NULL, 0x8000);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 0x4000);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 0x8000);
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0x0001);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 0x0002);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 0x0004);
@@ -411,13 +412,13 @@ static struct attribute *smsc47m192_attributes[] = {
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_offset.dev_attr.attr,
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
&dev_attr_cpu0_vid.attr,
&dev_attr_vrm.attr,
@@ -531,7 +532,7 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
/* Fill in the remaining client fields and put into the global list */
strlcpy(client->name, "smsc47m192", I2C_NAME_SIZE);
data->vrm = vid_which_vrm();
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(client)))
@@ -594,7 +595,7 @@ static struct smsc47m192_data *smsc47m192_update_device(struct device *dev)
struct smsc47m192_data *data = i2c_get_clientdata(client);
int i, config;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -645,7 +646,7 @@ static struct smsc47m192_data *smsc47m192_update_device(struct device *dev)
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 9a440c8cc52..24a6851491d 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -34,9 +34,9 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/mutex.h>
@@ -51,10 +51,7 @@ module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
-/* Device address
- Note that we can't determine the ISA address until we have initialized
- our module */
-static unsigned short address;
+static struct platform_device *pdev;
/*
The Via 686a southbridge has a LM78-like chip integrated on the same IC.
@@ -295,7 +292,8 @@ static inline long TEMP_FROM_REG10(u16 val)
/* For each registered chip, we need to keep some data in memory.
The structure is dynamically allocated. */
struct via686a_data {
- struct i2c_client client;
+ unsigned short addr;
+ const char *name;
struct class_device *class_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
@@ -315,98 +313,85 @@ struct via686a_data {
static struct pci_dev *s_bridge; /* pointer to the (only) via686a */
-static int via686a_detect(struct i2c_adapter *adapter);
-static int via686a_detach_client(struct i2c_client *client);
+static int via686a_probe(struct platform_device *pdev);
+static int via686a_remove(struct platform_device *pdev);
-static inline int via686a_read_value(struct i2c_client *client, u8 reg)
+static inline int via686a_read_value(struct via686a_data *data, u8 reg)
{
- return (inb_p(client->addr + reg));
+ return inb_p(data->addr + reg);
}
-static inline void via686a_write_value(struct i2c_client *client, u8 reg,
+static inline void via686a_write_value(struct via686a_data *data, u8 reg,
u8 value)
{
- outb_p(value, client->addr + reg);
+ outb_p(value, data->addr + reg);
}
static struct via686a_data *via686a_update_device(struct device *dev);
-static void via686a_init_client(struct i2c_client *client);
+static void via686a_init_device(struct via686a_data *data);
/* following are the sysfs callback functions */
/* 7 voltage sensors */
-static ssize_t show_in(struct device *dev, char *buf, int nr) {
+static ssize_t show_in(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr));
}
-static ssize_t show_in_min(struct device *dev, char *buf, int nr) {
+static ssize_t show_in_min(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr));
}
-static ssize_t show_in_max(struct device *dev, char *buf, int nr) {
+static ssize_t show_in_max(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr));
}
-static ssize_t set_in_min(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, nr);
- via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
+ via686a_write_value(data, VIA686A_REG_IN_MIN(nr),
data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_in_max(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, nr);
- via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
+ via686a_write_value(data, VIA686A_REG_IN_MAX(nr),
data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_in_offset(offset) \
-static ssize_t \
- show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static ssize_t \
- show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_min(dev, buf, offset); \
-} \
-static ssize_t \
- show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_max(dev, buf, offset); \
-} \
-static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_min(dev, buf, count, offset); \
-} \
-static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_max(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);\
-static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in##offset##_max, set_in##offset##_max);
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset);
show_in_offset(0);
show_in_offset(1);
@@ -415,150 +400,128 @@ show_in_offset(3);
show_in_offset(4);
/* 3 temperatures */
-static ssize_t show_temp(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr]));
}
-static ssize_t show_temp_over(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_over(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr]));
}
-static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr]));
}
-static ssize_t set_temp_over(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+static ssize_t set_temp_over(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_over[nr] = TEMP_TO_REG(val);
- via686a_write_value(client, VIA686A_REG_TEMP_OVER[nr],
+ via686a_write_value(data, VIA686A_REG_TEMP_OVER[nr],
data->temp_over[nr]);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_temp_hyst(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_hyst[nr] = TEMP_TO_REG(val);
- via686a_write_value(client, VIA686A_REG_TEMP_HYST[nr],
+ via686a_write_value(data, VIA686A_REG_TEMP_HYST[nr],
data->temp_hyst[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_temp_offset(offset) \
-static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp(dev, buf, offset - 1); \
-} \
-static ssize_t \
-show_temp_##offset##_over (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_over(dev, buf, offset - 1); \
-} \
-static ssize_t \
-show_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_hyst(dev, buf, offset - 1); \
-} \
-static ssize_t set_temp_##offset##_over (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_over(dev, buf, count, offset - 1); \
-} \
-static ssize_t set_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_hyst(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL);\
-static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
- show_temp_##offset##_over, set_temp_##offset##_over); \
-static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
- show_temp_##offset##_hyst, set_temp_##offset##_hyst);
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_over, set_temp_over, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp_hyst, set_temp_hyst, offset - 1);
show_temp_offset(1);
show_temp_offset(2);
show_temp_offset(3);
/* 2 Fans */
-static ssize_t show_fan(struct device *dev, char *buf, int nr) {
+static ssize_t show_fan(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
DIV_FROM_REG(data->fan_div[nr])) );
}
-static ssize_t show_fan_min(struct device *dev, char *buf, int nr) {
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n",
FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
}
-static ssize_t show_fan_div(struct device *dev, char *buf, int nr) {
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
}
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+ via686a_write_value(data, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_fan_div(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
int val = simple_strtol(buf, NULL, 10);
int old;
mutex_lock(&data->update_lock);
- old = via686a_read_value(client, VIA686A_REG_FANDIV);
+ old = via686a_read_value(data, VIA686A_REG_FANDIV);
data->fan_div[nr] = DIV_TO_REG(val);
old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
- via686a_write_value(client, VIA686A_REG_FANDIV, old);
+ via686a_write_value(data, VIA686A_REG_FANDIV, old);
mutex_unlock(&data->update_lock);
return count;
}
#define show_fan_offset(offset) \
-static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_min(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_div(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_min(dev, buf, count, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_div(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_min, set_fan_##offset##_min); \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_div, set_fan_##offset##_div);
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1);
show_fan_offset(1);
show_fan_offset(2);
@@ -570,41 +533,50 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct via686a_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
static struct attribute *via686a_attributes[] = {
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
- &dev_attr_in3_input.attr,
- &dev_attr_in4_input.attr,
- &dev_attr_in0_min.attr,
- &dev_attr_in1_min.attr,
- &dev_attr_in2_min.attr,
- &dev_attr_in3_min.attr,
- &dev_attr_in4_min.attr,
- &dev_attr_in0_max.attr,
- &dev_attr_in1_max.attr,
- &dev_attr_in2_max.attr,
- &dev_attr_in3_max.attr,
- &dev_attr_in4_max.attr,
-
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp3_input.attr,
- &dev_attr_temp1_max.attr,
- &dev_attr_temp2_max.attr,
- &dev_attr_temp3_max.attr,
- &dev_attr_temp1_max_hyst.attr,
- &dev_attr_temp2_max_hyst.attr,
- &dev_attr_temp3_max_hyst.attr,
-
- &dev_attr_fan1_input.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan1_min.attr,
- &dev_attr_fan2_min.attr,
- &dev_attr_fan1_div.attr,
- &dev_attr_fan2_div.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_div.dev_attr.attr,
&dev_attr_alarms.attr,
+ &dev_attr_name.attr,
NULL
};
@@ -612,58 +584,29 @@ static const struct attribute_group via686a_group = {
.attrs = via686a_attributes,
};
-/* The driver. I choose to use type i2c_driver, as at is identical to both
- smbus_driver and isa_driver, and clients could be of either kind */
-static struct i2c_driver via686a_driver = {
+static struct platform_driver via686a_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "via686a",
},
- .attach_adapter = via686a_detect,
- .detach_client = via686a_detach_client,
+ .probe = via686a_probe,
+ .remove = __devexit_p(via686a_remove),
};
/* This is called when the module is loaded */
-static int via686a_detect(struct i2c_adapter *adapter)
+static int __devinit via686a_probe(struct platform_device *pdev)
{
- struct i2c_client *new_client;
struct via686a_data *data;
- int err = 0;
- const char client_name[] = "via686a";
- u16 val;
-
- /* 8231 requires multiple of 256, we enforce that on 686 as well */
- if (force_addr) {
- address = force_addr & 0xFF00;
- dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
- address);
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_BASE_REG, address))
- return -ENODEV;
- }
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
- return -ENODEV;
- if (!(val & 0x0001)) {
- if (force_addr) {
- dev_info(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
- val | 0x0001))
- return -ENODEV;
- } else {
- dev_warn(&adapter->dev, "sensors disabled - enable "
- "with force_addr=0x%x\n", address);
- return -ENODEV;
- }
- }
+ struct resource *res;
+ int err;
/* Reserve the ISA region */
- if (!request_region(address, VIA686A_EXTENT,
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, VIA686A_EXTENT,
via686a_driver.driver.name)) {
- dev_err(&adapter->dev, "region 0x%x already in use!\n",
- address);
+ dev_err(&pdev->dev, "Region 0x%lx-0x%lx already in use!\n",
+ (unsigned long)res->start, (unsigned long)res->end);
return -ENODEV;
}
@@ -672,30 +615,19 @@ static int via686a_detect(struct i2c_adapter *adapter)
goto exit_release;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &via686a_driver;
- new_client->flags = 0;
-
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
-
- data->valid = 0;
+ platform_set_drvdata(pdev, data);
+ data->addr = res->start;
+ data->name = "via686a";
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
/* Initialize the VIA686A chip */
- via686a_init_client(new_client);
+ via686a_init_device(data);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &via686a_group)))
- goto exit_detach;
+ if ((err = sysfs_create_group(&pdev->dev.kobj, &via686a_group)))
+ goto exit_free;
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -704,51 +636,46 @@ static int via686a_detect(struct i2c_adapter *adapter)
return 0;
exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &via686a_group);
-exit_detach:
- i2c_detach_client(new_client);
+ sysfs_remove_group(&pdev->dev.kobj, &via686a_group);
exit_free:
kfree(data);
exit_release:
- release_region(address, VIA686A_EXTENT);
+ release_region(res->start, VIA686A_EXTENT);
return err;
}
-static int via686a_detach_client(struct i2c_client *client)
+static int __devexit via686a_remove(struct platform_device *pdev)
{
- struct via686a_data *data = i2c_get_clientdata(client);
- int err;
+ struct via686a_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->class_dev);
- sysfs_remove_group(&client->dev.kobj, &via686a_group);
+ sysfs_remove_group(&pdev->dev.kobj, &via686a_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
- release_region(client->addr, VIA686A_EXTENT);
+ release_region(data->addr, VIA686A_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
-static void via686a_init_client(struct i2c_client *client)
+static void __devinit via686a_init_device(struct via686a_data *data)
{
u8 reg;
/* Start monitoring */
- reg = via686a_read_value(client, VIA686A_REG_CONFIG);
- via686a_write_value(client, VIA686A_REG_CONFIG, (reg|0x01)&0x7F);
+ reg = via686a_read_value(data, VIA686A_REG_CONFIG);
+ via686a_write_value(data, VIA686A_REG_CONFIG, (reg | 0x01) & 0x7F);
/* Configure temp interrupt mode for continuous-interrupt operation */
- via686a_write_value(client, VIA686A_REG_TEMP_MODE,
- via686a_read_value(client, VIA686A_REG_TEMP_MODE) &
- !(VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS));
+ reg = via686a_read_value(data, VIA686A_REG_TEMP_MODE);
+ via686a_write_value(data, VIA686A_REG_TEMP_MODE,
+ (reg & ~VIA686A_TEMP_MODE_MASK)
+ | VIA686A_TEMP_MODE_CONTINUOUS);
}
static struct via686a_data *via686a_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+ struct via686a_data *data = dev_get_drvdata(dev);
int i;
mutex_lock(&data->update_lock);
@@ -757,27 +684,27 @@ static struct via686a_data *via686a_update_device(struct device *dev)
|| !data->valid) {
for (i = 0; i <= 4; i++) {
data->in[i] =
- via686a_read_value(client, VIA686A_REG_IN(i));
- data->in_min[i] = via686a_read_value(client,
+ via686a_read_value(data, VIA686A_REG_IN(i));
+ data->in_min[i] = via686a_read_value(data,
VIA686A_REG_IN_MIN
(i));
data->in_max[i] =
- via686a_read_value(client, VIA686A_REG_IN_MAX(i));
+ via686a_read_value(data, VIA686A_REG_IN_MAX(i));
}
for (i = 1; i <= 2; i++) {
data->fan[i - 1] =
- via686a_read_value(client, VIA686A_REG_FAN(i));
- data->fan_min[i - 1] = via686a_read_value(client,
+ via686a_read_value(data, VIA686A_REG_FAN(i));
+ data->fan_min[i - 1] = via686a_read_value(data,
VIA686A_REG_FAN_MIN(i));
}
for (i = 0; i <= 2; i++) {
- data->temp[i] = via686a_read_value(client,
+ data->temp[i] = via686a_read_value(data,
VIA686A_REG_TEMP[i]) << 2;
data->temp_over[i] =
- via686a_read_value(client,
+ via686a_read_value(data,
VIA686A_REG_TEMP_OVER[i]);
data->temp_hyst[i] =
- via686a_read_value(client,
+ via686a_read_value(data,
VIA686A_REG_TEMP_HYST[i]);
}
/* add in lower 2 bits
@@ -785,23 +712,23 @@ static struct via686a_data *via686a_update_device(struct device *dev)
temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
*/
- data->temp[0] |= (via686a_read_value(client,
+ data->temp[0] |= (via686a_read_value(data,
VIA686A_REG_TEMP_LOW1)
& 0xc0) >> 6;
data->temp[1] |=
- (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+ (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0x30) >> 4;
data->temp[2] |=
- (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+ (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0xc0) >> 6;
- i = via686a_read_value(client, VIA686A_REG_FANDIV);
+ i = via686a_read_value(data, VIA686A_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
data->alarms =
- via686a_read_value(client,
+ via686a_read_value(data,
VIA686A_REG_ALARM1) |
- (via686a_read_value(client, VIA686A_REG_ALARM2) << 8);
+ (via686a_read_value(data, VIA686A_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
}
@@ -818,32 +745,102 @@ static struct pci_device_id via686a_pci_ids[] = {
MODULE_DEVICE_TABLE(pci, via686a_pci_ids);
+static int __devinit via686a_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + VIA686A_EXTENT - 1,
+ .name = "via686a",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc("via686a", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "via686a: Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "via686a: Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "via686a: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __devinit via686a_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
- u16 val;
+ u16 address, val;
+ if (force_addr) {
+ address = force_addr & ~(VIA686A_EXTENT - 1);
+ dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address);
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VIA686A_BASE_REG, address | 1))
+ return -ENODEV;
+ }
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(dev, VIA686A_BASE_REG, &val))
return -ENODEV;
address = val & ~(VIA686A_EXTENT - 1);
- if (address == 0 && force_addr == 0) {
+ if (address == 0) {
dev_err(&dev->dev, "base address not set - upgrade BIOS "
"or use force_addr=0xaddr\n");
return -ENODEV;
}
- s_bridge = pci_dev_get(dev);
- if (i2c_isa_add_driver(&via686a_driver)) {
- pci_dev_put(s_bridge);
- s_bridge = NULL;
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_word(dev, VIA686A_ENABLE_REG, &val))
+ return -ENODEV;
+ if (!(val & 0x0001)) {
+ if (!force_addr) {
+ dev_warn(&dev->dev, "Sensors disabled, enable "
+ "with force_addr=0x%x\n", address);
+ return -ENODEV;
+ }
+
+ dev_warn(&dev->dev, "Enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VIA686A_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
}
+ if (platform_driver_register(&via686a_driver))
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ if (via686a_device_add(address))
+ goto exit_unregister;
+
/* Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
+ s_bridge = pci_dev_get(dev);
+ return -ENODEV;
+
+exit_unregister:
+ platform_driver_unregister(&via686a_driver);
+exit:
return -ENODEV;
}
@@ -862,7 +859,8 @@ static void __exit sm_via686a_exit(void)
{
pci_unregister_driver(&via686a_pci_driver);
if (s_bridge != NULL) {
- i2c_isa_del_driver(&via686a_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&via686a_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index a6a4aa0eee1..c604972f018 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -29,8 +29,7 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
@@ -42,10 +41,7 @@ static int force_addr;
module_param(force_addr, int, 0);
MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors");
-/* Device address
- Note that we can't determine the ISA address until we have initialized
- our module */
-static unsigned short isa_address;
+static struct platform_device *pdev;
#define VT8231_EXTENT 0x80
#define VT8231_BASE_REG 0x70
@@ -148,7 +144,9 @@ static inline u8 FAN_TO_REG(long rpm, int div)
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : 1310720 / ((val) * (div)))
struct vt8231_data {
- struct i2c_client client;
+ unsigned short addr;
+ const char *name;
+
struct mutex update_lock;
struct class_device *class_dev;
char valid; /* !=0 if following fields are valid */
@@ -168,20 +166,20 @@ struct vt8231_data {
};
static struct pci_dev *s_bridge;
-static int vt8231_detect(struct i2c_adapter *adapter);
-static int vt8231_detach_client(struct i2c_client *client);
+static int vt8231_probe(struct platform_device *pdev);
+static int vt8231_remove(struct platform_device *pdev);
static struct vt8231_data *vt8231_update_device(struct device *dev);
-static void vt8231_init_client(struct i2c_client *client);
+static void vt8231_init_device(struct vt8231_data *data);
-static inline int vt8231_read_value(struct i2c_client *client, u8 reg)
+static inline int vt8231_read_value(struct vt8231_data *data, u8 reg)
{
- return inb_p(client->addr + reg);
+ return inb_p(data->addr + reg);
}
-static inline void vt8231_write_value(struct i2c_client *client, u8 reg,
+static inline void vt8231_write_value(struct vt8231_data *data, u8 reg,
u8 value)
{
- outb_p(value, client->addr + reg);
+ outb_p(value, data->addr + reg);
}
/* following are the sysfs callback functions */
@@ -220,13 +218,12 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
- vt8231_write_value(client, regvoltmin[nr], data->in_min[nr]);
+ vt8231_write_value(data, regvoltmin[nr], data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -236,13 +233,12 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
- vt8231_write_value(client, regvoltmax[nr], data->in_max[nr]);
+ vt8231_write_value(data, regvoltmax[nr], data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -278,14 +274,13 @@ static ssize_t show_in5_max(struct device *dev, struct device_attribute *attr,
static ssize_t set_in5_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
0, 255);
- vt8231_write_value(client, regvoltmin[5], data->in_min[5]);
+ vt8231_write_value(data, regvoltmin[5], data->in_min[5]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -293,14 +288,13 @@ static ssize_t set_in5_min(struct device *dev, struct device_attribute *attr,
static ssize_t set_in5_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
0, 255);
- vt8231_write_value(client, regvoltmax[5], data->in_max[5]);
+ vt8231_write_value(data, regvoltmax[5], data->in_max[5]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -348,26 +342,24 @@ static ssize_t show_temp0_min(struct device *dev, struct device_attribute *attr,
static ssize_t set_temp0_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
- vt8231_write_value(client, regtempmax[0], data->temp_max[0]);
+ vt8231_write_value(data, regtempmax[0], data->temp_max[0]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
- vt8231_write_value(client, regtempmin[0], data->temp_min[0]);
+ vt8231_write_value(data, regtempmin[0], data->temp_min[0]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -404,13 +396,12 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
- vt8231_write_value(client, regtempmax[nr], data->temp_max[nr]);
+ vt8231_write_value(data, regtempmax[nr], data->temp_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -419,13 +410,12 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
- vt8231_write_value(client, regtempmin[nr], data->temp_min[nr]);
+ vt8231_write_value(data, regtempmin[nr], data->temp_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -486,13 +476,12 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+ vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -500,12 +489,11 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
unsigned long val = simple_strtoul(buf, NULL, 10);
int nr = sensor_attr->index;
- int old = vt8231_read_value(client, VT8231_REG_FANDIV);
+ int old = vt8231_read_value(data, VT8231_REG_FANDIV);
long min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
@@ -516,7 +504,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
- dev_err(&client->dev, "fan_div value %ld not supported."
+ dev_err(dev, "fan_div value %ld not supported."
"Choose one of 1, 2, 4 or 8!\n", val);
mutex_unlock(&data->update_lock);
return -EINVAL;
@@ -524,10 +512,10 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
/* Correct the fan minimum speed */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+ vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
- vt8231_write_value(client, VT8231_REG_FANDIV, old);
+ vt8231_write_value(data, VT8231_REG_FANDIV, old);
mutex_unlock(&data->update_lock);
return count;
}
@@ -551,9 +539,16 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
struct vt8231_data *data = vt8231_update_device(dev);
return sprintf(buf, "%d\n", data->alarms);
}
-
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
static struct attribute *vt8231_attributes_temps[6][4] = {
{
&dev_attr_temp1_input.attr,
@@ -648,6 +643,7 @@ static struct attribute *vt8231_attributes[] = {
&sensor_dev_attr_fan1_div.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr,
&dev_attr_alarms.attr,
+ &dev_attr_name.attr,
NULL
};
@@ -655,13 +651,13 @@ static const struct attribute_group vt8231_group = {
.attrs = vt8231_attributes,
};
-static struct i2c_driver vt8231_driver = {
+static struct platform_driver vt8231_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "vt8231",
},
- .attach_adapter = vt8231_detect,
- .detach_client = vt8231_detach_client,
+ .probe = vt8231_probe,
+ .remove = __devexit_p(vt8231_remove),
};
static struct pci_device_id vt8231_pci_ids[] = {
@@ -680,40 +676,18 @@ static struct pci_driver vt8231_pci_driver = {
.probe = vt8231_pci_probe,
};
-int vt8231_detect(struct i2c_adapter *adapter)
+int vt8231_probe(struct platform_device *pdev)
{
- struct i2c_client *client;
+ struct resource *res;
struct vt8231_data *data;
int err = 0, i;
- u16 val;
-
- /* 8231 requires multiple of 256 */
- if (force_addr) {
- isa_address = force_addr & 0xFF00;
- dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
- isa_address);
- if (PCIBIOS_SUCCESSFUL != pci_write_config_word(s_bridge,
- VT8231_BASE_REG, isa_address))
- return -ENODEV;
- }
-
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(s_bridge, VT8231_ENABLE_REG, &val))
- return -ENODEV;
-
- if (!(val & 0x0001)) {
- dev_warn(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VT8231_ENABLE_REG,
- val | 0x0001))
- return -ENODEV;
- }
/* Reserve the ISA region */
- if (!request_region(isa_address, VT8231_EXTENT,
- vt8231_pci_driver.name)) {
- dev_err(&adapter->dev, "region 0x%x already in use!\n",
- isa_address);
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, VT8231_EXTENT,
+ vt8231_driver.driver.name)) {
+ dev_err(&pdev->dev, "Region 0x%lx-0x%lx already in use!\n",
+ (unsigned long)res->start, (unsigned long)res->end);
return -ENODEV;
}
@@ -722,33 +696,23 @@ int vt8231_detect(struct i2c_adapter *adapter)
goto exit_release;
}
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = isa_address;
- client->adapter = adapter;
- client->driver = &vt8231_driver;
-
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, "vt8231", I2C_NAME_SIZE);
+ platform_set_drvdata(pdev, data);
+ data->addr = res->start;
+ data->name = "vt8231";
mutex_init(&data->update_lock);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
- vt8231_init_client(client);
+ vt8231_init_device(data);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&client->dev.kobj, &vt8231_group)))
- goto exit_detach;
+ if ((err = sysfs_create_group(&pdev->dev.kobj, &vt8231_group)))
+ goto exit_free;
/* Must update device information to find out the config field */
- data->uch_config = vt8231_read_value(client, VT8231_REG_UCH_CONFIG);
+ data->uch_config = vt8231_read_value(data, VT8231_REG_UCH_CONFIG);
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++) {
if (ISTEMP(i, data->uch_config)) {
- if ((err = sysfs_create_group(&client->dev.kobj,
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
&vt8231_group_temps[i])))
goto exit_remove_files;
}
@@ -756,13 +720,13 @@ int vt8231_detect(struct i2c_adapter *adapter)
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++) {
if (ISVOLT(i, data->uch_config)) {
- if ((err = sysfs_create_group(&client->dev.kobj,
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
&vt8231_group_volts[i])))
goto exit_remove_files;
}
}
- data->class_dev = hwmon_device_register(&client->dev);
+ data->class_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -771,56 +735,52 @@ int vt8231_detect(struct i2c_adapter *adapter)
exit_remove_files:
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_volts[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_temps[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
+
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
- sysfs_remove_group(&client->dev.kobj, &vt8231_group);
-exit_detach:
- i2c_detach_client(client);
exit_free:
+ platform_set_drvdata(pdev, NULL);
kfree(data);
+
exit_release:
- release_region(isa_address, VT8231_EXTENT);
+ release_region(res->start, VT8231_EXTENT);
return err;
}
-static int vt8231_detach_client(struct i2c_client *client)
+static int vt8231_remove(struct platform_device *pdev)
{
- struct vt8231_data *data = i2c_get_clientdata(client);
- int err, i;
+ struct vt8231_data *data = platform_get_drvdata(pdev);
+ int i;
hwmon_device_unregister(data->class_dev);
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_volts[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_temps[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
- sysfs_remove_group(&client->dev.kobj, &vt8231_group);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
- if ((err = i2c_detach_client(client))) {
- return err;
- }
-
- release_region(client->addr, VT8231_EXTENT);
+ release_region(data->addr, VT8231_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
-
return 0;
}
-static void vt8231_init_client(struct i2c_client *client)
+static void vt8231_init_device(struct vt8231_data *data)
{
- vt8231_write_value(client, VT8231_REG_TEMP1_CONFIG, 0);
- vt8231_write_value(client, VT8231_REG_TEMP2_CONFIG, 0);
+ vt8231_write_value(data, VT8231_REG_TEMP1_CONFIG, 0);
+ vt8231_write_value(data, VT8231_REG_TEMP2_CONFIG, 0);
}
static struct vt8231_data *vt8231_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int i;
u16 low;
@@ -830,41 +790,41 @@ static struct vt8231_data *vt8231_update_device(struct device *dev)
|| !data->valid) {
for (i = 0; i < 6; i++) {
if (ISVOLT(i, data->uch_config)) {
- data->in[i] = vt8231_read_value(client,
+ data->in[i] = vt8231_read_value(data,
regvolt[i]);
- data->in_min[i] = vt8231_read_value(client,
+ data->in_min[i] = vt8231_read_value(data,
regvoltmin[i]);
- data->in_max[i] = vt8231_read_value(client,
+ data->in_max[i] = vt8231_read_value(data,
regvoltmax[i]);
}
}
for (i = 0; i < 2; i++) {
- data->fan[i] = vt8231_read_value(client,
+ data->fan[i] = vt8231_read_value(data,
VT8231_REG_FAN(i));
- data->fan_min[i] = vt8231_read_value(client,
+ data->fan_min[i] = vt8231_read_value(data,
VT8231_REG_FAN_MIN(i));
}
- low = vt8231_read_value(client, VT8231_REG_TEMP_LOW01);
+ low = vt8231_read_value(data, VT8231_REG_TEMP_LOW01);
low = (low >> 6) | ((low & 0x30) >> 2)
- | (vt8231_read_value(client, VT8231_REG_TEMP_LOW25) << 4);
+ | (vt8231_read_value(data, VT8231_REG_TEMP_LOW25) << 4);
for (i = 0; i < 6; i++) {
if (ISTEMP(i, data->uch_config)) {
- data->temp[i] = (vt8231_read_value(client,
+ data->temp[i] = (vt8231_read_value(data,
regtemp[i]) << 2)
| ((low >> (2 * i)) & 0x03);
- data->temp_max[i] = vt8231_read_value(client,
+ data->temp_max[i] = vt8231_read_value(data,
regtempmax[i]);
- data->temp_min[i] = vt8231_read_value(client,
+ data->temp_min[i] = vt8231_read_value(data,
regtempmin[i]);
}
}
- i = vt8231_read_value(client, VT8231_REG_FANDIV);
+ i = vt8231_read_value(data, VT8231_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
- data->alarms = vt8231_read_value(client, VT8231_REG_ALARM1) |
- (vt8231_read_value(client, VT8231_REG_ALARM2) << 8);
+ data->alarms = vt8231_read_value(data, VT8231_REG_ALARM1) |
+ (vt8231_read_value(data, VT8231_REG_ALARM2) << 8);
/* Set alarm flags correctly */
if (!data->fan[0] && data->fan_min[0]) {
@@ -888,33 +848,102 @@ static struct vt8231_data *vt8231_update_device(struct device *dev)
return data;
}
+static int __devinit vt8231_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + VT8231_EXTENT - 1,
+ .name = "vt8231",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc("vt8231", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "vt8231: Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "vt8231: Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "vt8231: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __devinit vt8231_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
- u16 val;
+ u16 address, val;
+ if (force_addr) {
+ address = force_addr & 0xff00;
+ dev_warn(&dev->dev, "Forcing ISA address 0x%x\n",
+ address);
+
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VT8231_BASE_REG, address | 1))
+ return -ENODEV;
+ }
if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_BASE_REG,
&val))
return -ENODEV;
- isa_address = val & ~(VT8231_EXTENT - 1);
- if (isa_address == 0 && force_addr == 0) {
+ address = val & ~(VT8231_EXTENT - 1);
+ if (address == 0) {
dev_err(&dev->dev, "base address not set -\
upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
- s_bridge = pci_dev_get(dev);
+ if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_ENABLE_REG,
+ &val))
+ return -ENODEV;
- if (i2c_isa_add_driver(&vt8231_driver)) {
- pci_dev_put(s_bridge);
- s_bridge = NULL;
+ if (!(val & 0x0001)) {
+ dev_warn(&dev->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VT8231_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
}
+ if (platform_driver_register(&vt8231_driver))
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ if (vt8231_device_add(address))
+ goto exit_unregister;
+
/* Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
+
+ /* We do, however, mark ourselves as using the PCI device to stop it
+ getting unloaded. */
+ s_bridge = pci_dev_get(dev);
+ return -ENODEV;
+
+exit_unregister:
+ platform_driver_unregister(&vt8231_driver);
+exit:
return -ENODEV;
}
@@ -927,7 +956,8 @@ static void __exit sm_vt8231_exit(void)
{
pci_unregister_driver(&vt8231_pci_driver);
if (s_bridge != NULL) {
- i2c_isa_del_driver(&vt8231_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&vt8231_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 30a76404f0a..c51ae2e1775 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -41,41 +41,39 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/io.h>
#include "lm75.h"
-/* The actual ISA address is read from Super-I/O configuration space */
-static unsigned short address;
+enum kinds { w83627ehf, w83627dhg };
-/*
- * Super-I/O constants and functions
- */
+/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
+static const char * w83627ehf_device_names[] = {
+ "w83627ehf",
+ "w83627dhg",
+};
+
+#define DRVNAME "w83627ehf"
/*
- * The three following globals are initialized in w83627ehf_find(), before
- * the i2c-isa device is created. Otherwise, they could be stored in
- * w83627ehf_data. This is ugly, but necessary, and when the driver is next
- * updated to become a platform driver, the globals will disappear.
+ * Super-I/O constants and functions
*/
-static int REG; /* The register to read/write */
-static int VAL; /* The value to read/write */
-/* The w83627ehf/ehg have 10 voltage inputs, but the w83627dhg has 9. This
- * value is also used in w83627ehf_detect() to export a device name in sysfs
- * (e.g. w83627ehf or w83627dhg) */
-static int w83627ehf_num_in;
#define W83627EHF_LD_HWM 0x0b
#define SIO_REG_LDSEL 0x07 /* Logical device select */
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_EN_VRM10 0x2C /* GPIO3, GPIO4 selection */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+#define SIO_REG_VID_CTRL 0xF0 /* VID control */
+#define SIO_REG_VID_DATA 0xF1 /* VID data */
#define SIO_W83627EHF_ID 0x8850
#define SIO_W83627EHG_ID 0x8860
@@ -83,38 +81,38 @@ static int w83627ehf_num_in;
#define SIO_ID_MASK 0xFFF0
static inline void
-superio_outb(int reg, int val)
+superio_outb(int ioreg, int reg, int val)
{
- outb(reg, REG);
- outb(val, VAL);
+ outb(reg, ioreg);
+ outb(val, ioreg + 1);
}
static inline int
-superio_inb(int reg)
+superio_inb(int ioreg, int reg)
{
- outb(reg, REG);
- return inb(VAL);
+ outb(reg, ioreg);
+ return inb(ioreg + 1);
}
static inline void
-superio_select(int ld)
+superio_select(int ioreg, int ld)
{
- outb(SIO_REG_LDSEL, REG);
- outb(ld, VAL);
+ outb(SIO_REG_LDSEL, ioreg);
+ outb(ld, ioreg + 1);
}
static inline void
-superio_enter(void)
+superio_enter(int ioreg)
{
- outb(0x87, REG);
- outb(0x87, REG);
+ outb(0x87, ioreg);
+ outb(0x87, ioreg);
}
static inline void
-superio_exit(void)
+superio_exit(int ioreg)
{
- outb(0x02, REG);
- outb(0x02, VAL);
+ outb(0x02, ioreg);
+ outb(0x02, ioreg + 1);
}
/*
@@ -124,8 +122,8 @@ superio_exit(void)
#define IOREGION_ALIGNMENT ~7
#define IOREGION_OFFSET 5
#define IOREGION_LENGTH 2
-#define ADDR_REG_OFFSET 5
-#define DATA_REG_OFFSET 6
+#define ADDR_REG_OFFSET 0
+#define DATA_REG_OFFSET 1
#define W83627EHF_REG_BANK 0x4E
#define W83627EHF_REG_CONFIG 0x40
@@ -255,7 +253,9 @@ static inline u8 in_to_reg(u32 val, u8 nr)
*/
struct w83627ehf_data {
- struct i2c_client client;
+ int addr; /* IO base of hw monitor block */
+ const char *name;
+
struct class_device *class_dev;
struct mutex lock;
@@ -264,6 +264,7 @@ struct w83627ehf_data {
unsigned long last_updated; /* In jiffies */
/* Register values */
+ u8 in_num; /* number of in inputs we have */
u8 in[10]; /* Register value */
u8 in_max[10]; /* Register value */
u8 in_min[10]; /* Register value */
@@ -271,6 +272,7 @@ struct w83627ehf_data {
u8 fan_min[5];
u8 fan_div[5];
u8 has_fan; /* some fan inputs can be disabled */
+ u8 temp_type[3];
s8 temp1;
s8 temp1_max;
s8 temp1_max_hyst;
@@ -288,6 +290,14 @@ struct w83627ehf_data {
u8 fan_min_output[4]; /* minimum fan speed */
u8 fan_stop_time[4];
+
+ u8 vid;
+ u8 vrm;
+};
+
+struct w83627ehf_sio_data {
+ int sioreg;
+ enum kinds kind;
};
static inline int is_word_sized(u16 reg)
@@ -303,156 +313,152 @@ static inline int is_word_sized(u16 reg)
nothing for registers which live in bank 0. For others, they respectively
set the bank register to the correct value (before the register is
accessed), and back to 0 (afterwards). */
-static inline void w83627ehf_set_bank(struct i2c_client *client, u16 reg)
+static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg)
{
if (reg & 0xff00) {
- outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
- outb_p(reg >> 8, client->addr + DATA_REG_OFFSET);
+ outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
+ outb_p(reg >> 8, data->addr + DATA_REG_OFFSET);
}
}
-static inline void w83627ehf_reset_bank(struct i2c_client *client, u16 reg)
+static inline void w83627ehf_reset_bank(struct w83627ehf_data *data, u16 reg)
{
if (reg & 0xff00) {
- outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
- outb_p(0, client->addr + DATA_REG_OFFSET);
+ outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
+ outb_p(0, data->addr + DATA_REG_OFFSET);
}
}
-static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg)
+static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
int res, word_sized = is_word_sized(reg);
mutex_lock(&data->lock);
- w83627ehf_set_bank(client, reg);
- outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
- res = inb_p(client->addr + DATA_REG_OFFSET);
+ w83627ehf_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
+ res = inb_p(data->addr + DATA_REG_OFFSET);
if (word_sized) {
outb_p((reg & 0xff) + 1,
- client->addr + ADDR_REG_OFFSET);
- res = (res << 8) + inb_p(client->addr + DATA_REG_OFFSET);
+ data->addr + ADDR_REG_OFFSET);
+ res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET);
}
- w83627ehf_reset_bank(client, reg);
+ w83627ehf_reset_bank(data, reg);
mutex_unlock(&data->lock);
return res;
}
-static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value)
+static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, u16 value)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
int word_sized = is_word_sized(reg);
mutex_lock(&data->lock);
- w83627ehf_set_bank(client, reg);
- outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
+ w83627ehf_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
if (word_sized) {
- outb_p(value >> 8, client->addr + DATA_REG_OFFSET);
+ outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
outb_p((reg & 0xff) + 1,
- client->addr + ADDR_REG_OFFSET);
+ data->addr + ADDR_REG_OFFSET);
}
- outb_p(value & 0xff, client->addr + DATA_REG_OFFSET);
- w83627ehf_reset_bank(client, reg);
+ outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
+ w83627ehf_reset_bank(data, reg);
mutex_unlock(&data->lock);
return 0;
}
/* This function assumes that the caller holds data->update_lock */
-static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
+static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
u8 reg;
switch (nr) {
case 0:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf)
| ((data->fan_div[0] & 0x03) << 4);
/* fan5 input control bit is write only, compute the value */
reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
- w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf)
+ w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf)
| ((data->fan_div[0] & 0x04) << 3);
- w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
break;
case 1:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f)
| ((data->fan_div[1] & 0x03) << 6);
/* fan5 input control bit is write only, compute the value */
reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
- w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf)
+ w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf)
| ((data->fan_div[1] & 0x04) << 4);
- w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
break;
case 2:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV2) & 0x3f)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f)
| ((data->fan_div[2] & 0x03) << 6);
- w83627ehf_write_value(client, W83627EHF_REG_FANDIV2, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0x7f)
+ w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f)
| ((data->fan_div[2] & 0x04) << 5);
- w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
break;
case 3:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0xfc)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc)
| (data->fan_div[3] & 0x03);
- w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT) & 0x7f)
+ w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f)
| ((data->fan_div[3] & 0x04) << 5);
- w83627ehf_write_value(client, W83627EHF_REG_SMI_OVT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg);
break;
case 4:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73)
| ((data->fan_div[4] & 0x03) << 2)
| ((data->fan_div[4] & 0x04) << 5);
- w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
break;
}
}
static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
int pwmcfg = 0, tolerance = 0; /* shut up the compiler */
int i;
mutex_lock(&data->update_lock);
- if (time_after(jiffies, data->last_updated + HZ)
+ if (time_after(jiffies, data->last_updated + HZ + HZ/2)
|| !data->valid) {
/* Fan clock dividers */
- i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = (i >> 6) & 0x03;
- i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV2);
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
data->fan_div[2] = (i >> 6) & 0x03;
- i = w83627ehf_read_value(client, W83627EHF_REG_VBAT);
+ i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
data->fan_div[0] |= (i >> 3) & 0x04;
data->fan_div[1] |= (i >> 4) & 0x04;
data->fan_div[2] |= (i >> 5) & 0x04;
if (data->has_fan & ((1 << 3) | (1 << 4))) {
- i = w83627ehf_read_value(client, W83627EHF_REG_DIODE);
+ i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
data->fan_div[3] = i & 0x03;
data->fan_div[4] = ((i >> 2) & 0x03)
| ((i >> 5) & 0x04);
}
if (data->has_fan & (1 << 3)) {
- i = w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT);
+ i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
data->fan_div[3] |= (i >> 5) & 0x04;
}
/* Measured voltages and limits */
- for (i = 0; i < w83627ehf_num_in; i++) {
- data->in[i] = w83627ehf_read_value(client,
+ for (i = 0; i < data->in_num; i++) {
+ data->in[i] = w83627ehf_read_value(data,
W83627EHF_REG_IN(i));
- data->in_min[i] = w83627ehf_read_value(client,
+ data->in_min[i] = w83627ehf_read_value(data,
W83627EHF_REG_IN_MIN(i));
- data->in_max[i] = w83627ehf_read_value(client,
+ data->in_max[i] = w83627ehf_read_value(data,
W83627EHF_REG_IN_MAX(i));
}
@@ -461,9 +467,9 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
if (!(data->has_fan & (1 << i)))
continue;
- data->fan[i] = w83627ehf_read_value(client,
+ data->fan[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN[i]);
- data->fan_min[i] = w83627ehf_read_value(client,
+ data->fan_min[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_MIN[i]);
/* If we failed to measure the fan speed and clock
@@ -471,16 +477,16 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
time */
if (data->fan[i] == 0xff
&& data->fan_div[i] < 0x07) {
- dev_dbg(&client->dev, "Increasing fan%d "
+ dev_dbg(dev, "Increasing fan%d "
"clock divider from %u to %u\n",
i + 1, div_from_reg(data->fan_div[i]),
div_from_reg(data->fan_div[i] + 1));
data->fan_div[i]++;
- w83627ehf_write_fan_div(client, i);
+ w83627ehf_write_fan_div(data, i);
/* Preserve min limit if possible */
if (data->fan_min[i] >= 2
&& data->fan_min[i] != 255)
- w83627ehf_write_value(client,
+ w83627ehf_write_value(data,
W83627EHF_REG_FAN_MIN[i],
(data->fan_min[i] /= 2));
}
@@ -489,9 +495,9 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
for (i = 0; i < 4; i++) {
/* pwmcfg, tolarance mapped for i=0, i=1 to same reg */
if (i != 1) {
- pwmcfg = w83627ehf_read_value(client,
+ pwmcfg = w83627ehf_read_value(data,
W83627EHF_REG_PWM_ENABLE[i]);
- tolerance = w83627ehf_read_value(client,
+ tolerance = w83627ehf_read_value(data,
W83627EHF_REG_TOLERANCE[i]);
}
data->pwm_mode[i] =
@@ -500,14 +506,14 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
data->pwm_enable[i] =
((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
& 3) + 1;
- data->pwm[i] = w83627ehf_read_value(client,
+ data->pwm[i] = w83627ehf_read_value(data,
W83627EHF_REG_PWM[i]);
- data->fan_min_output[i] = w83627ehf_read_value(client,
+ data->fan_min_output[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_MIN_OUTPUT[i]);
- data->fan_stop_time[i] = w83627ehf_read_value(client,
+ data->fan_stop_time[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_STOP_TIME[i]);
data->target_temp[i] =
- w83627ehf_read_value(client,
+ w83627ehf_read_value(data,
W83627EHF_REG_TARGET[i]) &
(data->pwm_mode[i] == 1 ? 0x7f : 0xff);
data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0))
@@ -515,26 +521,26 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
}
/* Measured temperatures and limits */
- data->temp1 = w83627ehf_read_value(client,
+ data->temp1 = w83627ehf_read_value(data,
W83627EHF_REG_TEMP1);
- data->temp1_max = w83627ehf_read_value(client,
+ data->temp1_max = w83627ehf_read_value(data,
W83627EHF_REG_TEMP1_OVER);
- data->temp1_max_hyst = w83627ehf_read_value(client,
+ data->temp1_max_hyst = w83627ehf_read_value(data,
W83627EHF_REG_TEMP1_HYST);
for (i = 0; i < 2; i++) {
- data->temp[i] = w83627ehf_read_value(client,
+ data->temp[i] = w83627ehf_read_value(data,
W83627EHF_REG_TEMP[i]);
- data->temp_max[i] = w83627ehf_read_value(client,
+ data->temp_max[i] = w83627ehf_read_value(data,
W83627EHF_REG_TEMP_OVER[i]);
- data->temp_max_hyst[i] = w83627ehf_read_value(client,
+ data->temp_max_hyst[i] = w83627ehf_read_value(data,
W83627EHF_REG_TEMP_HYST[i]);
}
- data->alarms = w83627ehf_read_value(client,
+ data->alarms = w83627ehf_read_value(data,
W83627EHF_REG_ALARM1) |
- (w83627ehf_read_value(client,
+ (w83627ehf_read_value(data,
W83627EHF_REG_ALARM2) << 8) |
- (w83627ehf_read_value(client,
+ (w83627ehf_read_value(data,
W83627EHF_REG_ALARM3) << 16);
data->last_updated = jiffies;
@@ -567,15 +573,14 @@ static ssize_t \
store_in_##reg (struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u32 val = simple_strtoul(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->in_##reg[nr] = in_to_reg(val, nr); \
- w83627ehf_write_value(client, W83627EHF_REG_IN_##REG(nr), \
+ w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
mutex_unlock(&data->update_lock); \
return count; \
@@ -673,8 +678,7 @@ static ssize_t
store_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
unsigned int val = simple_strtoul(buf, NULL, 10);
@@ -716,18 +720,25 @@ store_fan_min(struct device *dev, struct device_attribute *attr,
/* Write both the fan clock divider (if it changed) and the new
fan min (unconditionally) */
if (new_div != data->fan_div[nr]) {
- if (new_div > data->fan_div[nr])
- data->fan[nr] >>= (data->fan_div[nr] - new_div);
- else
- data->fan[nr] <<= (new_div - data->fan_div[nr]);
+ /* Preserve the fan speed reading */
+ if (data->fan[nr] != 0xff) {
+ if (new_div > data->fan_div[nr])
+ data->fan[nr] >>= new_div - data->fan_div[nr];
+ else if (data->fan[nr] & 0x80)
+ data->fan[nr] = 0xff;
+ else
+ data->fan[nr] <<= data->fan_div[nr] - new_div;
+ }
dev_dbg(dev, "fan%u clock divider changed from %u to %u\n",
nr + 1, div_from_reg(data->fan_div[nr]),
div_from_reg(new_div));
data->fan_div[nr] = new_div;
- w83627ehf_write_fan_div(client, nr);
+ w83627ehf_write_fan_div(data, nr);
+ /* Give the chip time to sample a new speed value */
+ data->last_updated = jiffies;
}
- w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr],
+ w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[nr],
data->fan_min[nr]);
mutex_unlock(&data->update_lock);
@@ -788,13 +799,12 @@ static ssize_t \
store_temp1_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
u32 val = simple_strtoul(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->temp1_##reg = temp1_to_reg(val, -128000, 127000); \
- w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \
+ w83627ehf_write_value(data, W83627EHF_REG_TEMP1_##REG, \
data->temp1_##reg); \
mutex_unlock(&data->update_lock); \
return count; \
@@ -822,15 +832,14 @@ static ssize_t \
store_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u32 val = simple_strtoul(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
- w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \
+ w83627ehf_write_value(data, W83627EHF_REG_TEMP_##REG[nr], \
data->reg[nr]); \
mutex_unlock(&data->update_lock); \
return count; \
@@ -838,6 +847,15 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
store_temp_reg(OVER, temp_max);
store_temp_reg(HYST, temp_max_hyst);
+static ssize_t
+show_temp_type(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627ehf_data *data = w83627ehf_update_device(dev);
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ return sprintf(buf, "%d\n", (int)data->temp_type[nr]);
+}
+
static struct sensor_device_attribute sda_temp[] = {
SENSOR_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0),
SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0),
@@ -857,6 +875,9 @@ static struct sensor_device_attribute sda_temp[] = {
SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4),
SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5),
SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13),
+ SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0),
+ SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1),
+ SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2),
};
#define show_pwm_reg(reg) \
@@ -877,8 +898,7 @@ static ssize_t
store_pwm_mode(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u32 val = simple_strtoul(buf, NULL, 10);
@@ -887,12 +907,12 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
if (val > 1)
return -EINVAL;
mutex_lock(&data->update_lock);
- reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
data->pwm_mode[nr] = val;
reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]);
if (!val)
reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr];
- w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg);
+ w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
mutex_unlock(&data->update_lock);
return count;
}
@@ -901,15 +921,14 @@ static ssize_t
store_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255);
mutex_lock(&data->update_lock);
data->pwm[nr] = val;
- w83627ehf_write_value(client, W83627EHF_REG_PWM[nr], val);
+ w83627ehf_write_value(data, W83627EHF_REG_PWM[nr], val);
mutex_unlock(&data->update_lock);
return count;
}
@@ -918,8 +937,7 @@ static ssize_t
store_pwm_enable(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u32 val = simple_strtoul(buf, NULL, 10);
@@ -928,11 +946,11 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
if (!val || (val > 2)) /* only modes 1 and 2 are supported */
return -EINVAL;
mutex_lock(&data->update_lock);
- reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
data->pwm_enable[nr] = val;
reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]);
reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr];
- w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg);
+ w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
mutex_unlock(&data->update_lock);
return count;
}
@@ -955,15 +973,14 @@ static ssize_t
store_target_temp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 127000);
mutex_lock(&data->update_lock);
data->target_temp[nr] = val;
- w83627ehf_write_value(client, W83627EHF_REG_TARGET[nr], val);
+ w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val);
mutex_unlock(&data->update_lock);
return count;
}
@@ -972,8 +989,7 @@ static ssize_t
store_tolerance(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u16 reg;
@@ -981,13 +997,13 @@ store_tolerance(struct device *dev, struct device_attribute *attr,
u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 15000);
mutex_lock(&data->update_lock);
- reg = w83627ehf_read_value(client, W83627EHF_REG_TOLERANCE[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
data->tolerance[nr] = val;
if (nr == 1)
reg = (reg & 0x0f) | (val << 4);
else
reg = (reg & 0xf0) | val;
- w83627ehf_write_value(client, W83627EHF_REG_TOLERANCE[nr], reg);
+ w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
mutex_unlock(&data->update_lock);
return count;
}
@@ -1058,14 +1074,13 @@ static ssize_t \
store_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{\
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \
+ w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
}
@@ -1087,21 +1102,28 @@ static ssize_t \
store_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u8 val = step_time_to_reg(simple_strtoul(buf, NULL, 10), \
data->pwm_mode[nr]); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \
+ w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
} \
fan_time_functions(fan_stop_time, FAN_STOP_TIME)
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct sensor_device_attribute sda_sf3_arrays_fan4[] = {
SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
@@ -1125,8 +1147,16 @@ static struct sensor_device_attribute sda_sf3_arrays[] = {
store_fan_min_output, 2),
};
+static ssize_t
+show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
/*
- * Driver and client management
+ * Driver and device management
*/
static void w83627ehf_device_remove_files(struct device *dev)
@@ -1134,12 +1164,13 @@ static void w83627ehf_device_remove_files(struct device *dev)
/* some entries in the following arrays may not have been used in
* device_create_file(), but device_remove_file() will ignore them */
int i;
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
- for (i = 0; i < w83627ehf_num_in; i++) {
+ for (i = 0; i < data->in_num; i++) {
device_remove_file(dev, &sda_in_input[i].dev_attr);
device_remove_file(dev, &sda_in_alarm[i].dev_attr);
device_remove_file(dev, &sda_in_min[i].dev_attr);
@@ -1160,43 +1191,64 @@ static void w83627ehf_device_remove_files(struct device *dev)
}
for (i = 0; i < ARRAY_SIZE(sda_temp); i++)
device_remove_file(dev, &sda_temp[i].dev_attr);
-}
-static struct i2c_driver w83627ehf_driver;
+ device_remove_file(dev, &dev_attr_name);
+ if (data->vid != 0x3f)
+ device_remove_file(dev, &dev_attr_cpu0_vid);
+}
-static void w83627ehf_init_client(struct i2c_client *client)
+/* Get the monitoring functions started */
+static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
{
int i;
- u8 tmp;
+ u8 tmp, diode;
/* Start monitoring is needed */
- tmp = w83627ehf_read_value(client, W83627EHF_REG_CONFIG);
+ tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG);
if (!(tmp & 0x01))
- w83627ehf_write_value(client, W83627EHF_REG_CONFIG,
+ w83627ehf_write_value(data, W83627EHF_REG_CONFIG,
tmp | 0x01);
/* Enable temp2 and temp3 if needed */
for (i = 0; i < 2; i++) {
- tmp = w83627ehf_read_value(client,
+ tmp = w83627ehf_read_value(data,
W83627EHF_REG_TEMP_CONFIG[i]);
if (tmp & 0x01)
- w83627ehf_write_value(client,
+ w83627ehf_write_value(data,
W83627EHF_REG_TEMP_CONFIG[i],
tmp & 0xfe);
}
+
+ /* Enable VBAT monitoring if needed */
+ tmp = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
+ if (!(tmp & 0x01))
+ w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01);
+
+ /* Get thermal sensor types */
+ diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+ for (i = 0; i < 3; i++) {
+ if ((tmp & (0x02 << i)))
+ data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 2;
+ else
+ data->temp_type[i] = 4; /* thermistor */
+ }
}
-static int w83627ehf_detect(struct i2c_adapter *adapter)
+static int __devinit w83627ehf_probe(struct platform_device *pdev)
{
- struct i2c_client *client;
+ struct device *dev = &pdev->dev;
+ struct w83627ehf_sio_data *sio_data = dev->platform_data;
struct w83627ehf_data *data;
- struct device *dev;
- u8 fan4pin, fan5pin;
+ struct resource *res;
+ u8 fan4pin, fan5pin, en_vrm10;
int i, err = 0;
- if (!request_region(address + IOREGION_OFFSET, IOREGION_LENGTH,
- w83627ehf_driver.driver.name)) {
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, IOREGION_LENGTH, DRVNAME)) {
err = -EBUSY;
+ dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)res->start + IOREGION_LENGTH - 1);
goto exit;
}
@@ -1205,41 +1257,47 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
goto exit_release;
}
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
+ data->addr = res->start;
mutex_init(&data->lock);
- client->adapter = adapter;
- client->driver = &w83627ehf_driver;
- client->flags = 0;
- dev = &client->dev;
-
- if (w83627ehf_num_in == 9)
- strlcpy(client->name, "w83627dhg", I2C_NAME_SIZE);
- else /* just say ehf. 627EHG is 627EHF in lead-free packaging. */
- strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
-
- data->valid = 0;
mutex_init(&data->update_lock);
+ data->name = w83627ehf_device_names[sio_data->kind];
+ platform_set_drvdata(pdev, data);
- /* Tell the i2c layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ /* 627EHG and 627EHF have 10 voltage inputs; DHG has 9 */
+ data->in_num = (sio_data->kind == w83627dhg) ? 9 : 10;
/* Initialize the chip */
- w83627ehf_init_client(client);
-
- /* A few vars need to be filled upon startup */
- for (i = 0; i < 5; i++)
- data->fan_min[i] = w83627ehf_read_value(client,
- W83627EHF_REG_FAN_MIN[i]);
+ w83627ehf_init_device(data);
+
+ data->vrm = vid_which_vrm();
+ superio_enter(sio_data->sioreg);
+ /* Set VID input sensibility if needed. In theory the BIOS should
+ have set it, but in practice it's not always the case. */
+ en_vrm10 = superio_inb(sio_data->sioreg, SIO_REG_EN_VRM10);
+ if ((en_vrm10 & 0x08) && data->vrm != 100) {
+ dev_warn(dev, "Setting VID input voltage to TTL\n");
+ superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
+ en_vrm10 & ~0x08);
+ } else if (!(en_vrm10 & 0x08) && data->vrm == 100) {
+ dev_warn(dev, "Setting VID input voltage to VRM10\n");
+ superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
+ en_vrm10 | 0x08);
+ }
+ /* Read VID value */
+ superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
+ if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80)
+ data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA) & 0x3f;
+ else {
+ dev_info(dev, "VID pins in output mode, CPU VID not "
+ "available\n");
+ data->vid = 0x3f;
+ }
/* fan4 and fan5 share some pins with the GPIO and serial flash */
- superio_enter();
- fan5pin = superio_inb(0x24) & 0x2;
- fan4pin = superio_inb(0x29) & 0x6;
- superio_exit();
+ fan5pin = superio_inb(sio_data->sioreg, 0x24) & 0x2;
+ fan4pin = superio_inb(sio_data->sioreg, 0x29) & 0x6;
+ superio_exit(sio_data->sioreg);
/* It looks like fan4 and fan5 pins can be alternatively used
as fan on/off switches, but fan5 control is write only :/
@@ -1248,7 +1306,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
is not the default. */
data->has_fan = 0x07; /* fan1, fan2 and fan3 */
- i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
if ((i & (1 << 2)) && (!fan4pin))
data->has_fan |= (1 << 3);
if (!(i & (1 << 1)) && (!fan5pin))
@@ -1268,7 +1326,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
goto exit_remove;
}
- for (i = 0; i < w83627ehf_num_in; i++)
+ for (i = 0; i < data->in_num; i++)
if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
|| (err = device_create_file(dev,
&sda_in_alarm[i].dev_attr))
@@ -1308,6 +1366,16 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
if ((err = device_create_file(dev, &sda_temp[i].dev_attr)))
goto exit_remove;
+ err = device_create_file(dev, &dev_attr_name);
+ if (err)
+ goto exit_remove;
+
+ if (data->vid != 0x3f) {
+ err = device_create_file(dev, &dev_attr_cpu0_vid);
+ if (err)
+ goto exit_remove;
+ }
+
data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
@@ -1318,95 +1386,172 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
exit_remove:
w83627ehf_device_remove_files(dev);
- i2c_detach_client(client);
-exit_free:
kfree(data);
+ platform_set_drvdata(pdev, NULL);
exit_release:
- release_region(address + IOREGION_OFFSET, IOREGION_LENGTH);
+ release_region(res->start, IOREGION_LENGTH);
exit:
return err;
}
-static int w83627ehf_detach_client(struct i2c_client *client)
+static int __devexit w83627ehf_remove(struct platform_device *pdev)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
- int err;
+ struct w83627ehf_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->class_dev);
- w83627ehf_device_remove_files(&client->dev);
-
- if ((err = i2c_detach_client(client)))
- return err;
- release_region(client->addr + IOREGION_OFFSET, IOREGION_LENGTH);
+ w83627ehf_device_remove_files(&pdev->dev);
+ release_region(data->addr, IOREGION_LENGTH);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
-static struct i2c_driver w83627ehf_driver = {
+static struct platform_driver w83627ehf_driver = {
.driver = {
.owner = THIS_MODULE,
- .name = "w83627ehf",
+ .name = DRVNAME,
},
- .attach_adapter = w83627ehf_detect,
- .detach_client = w83627ehf_detach_client,
+ .probe = w83627ehf_probe,
+ .remove = __devexit_p(w83627ehf_remove),
};
-static int __init w83627ehf_find(int sioaddr, unsigned short *addr)
+/* w83627ehf_find() looks for a '627 in the Super-I/O config space */
+static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
+ struct w83627ehf_sio_data *sio_data)
{
+ static const char __initdata sio_name_W83627EHF[] = "W83627EHF";
+ static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
+ static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
+
u16 val;
+ const char *sio_name;
- REG = sioaddr;
- VAL = sioaddr + 1;
- superio_enter();
+ superio_enter(sioaddr);
- val = (superio_inb(SIO_REG_DEVID) << 8)
- | superio_inb(SIO_REG_DEVID + 1);
+ val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8)
+ | superio_inb(sioaddr, SIO_REG_DEVID + 1);
switch (val & SIO_ID_MASK) {
- case SIO_W83627DHG_ID:
- w83627ehf_num_in = 9;
- break;
case SIO_W83627EHF_ID:
+ sio_data->kind = w83627ehf;
+ sio_name = sio_name_W83627EHF;
+ break;
case SIO_W83627EHG_ID:
- w83627ehf_num_in = 10;
+ sio_data->kind = w83627ehf;
+ sio_name = sio_name_W83627EHG;
+ break;
+ case SIO_W83627DHG_ID:
+ sio_data->kind = w83627dhg;
+ sio_name = sio_name_W83627DHG;
break;
default:
- printk(KERN_WARNING "w83627ehf: unsupported chip ID: 0x%04x\n",
- val);
- superio_exit();
+ if (val != 0xffff)
+ pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n",
+ val);
+ superio_exit(sioaddr);
return -ENODEV;
}
- superio_select(W83627EHF_LD_HWM);
- val = (superio_inb(SIO_REG_ADDR) << 8)
- | superio_inb(SIO_REG_ADDR + 1);
+ /* We have a known chip, find the HWM I/O address */
+ superio_select(sioaddr, W83627EHF_LD_HWM);
+ val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8)
+ | superio_inb(sioaddr, SIO_REG_ADDR + 1);
*addr = val & IOREGION_ALIGNMENT;
if (*addr == 0) {
- superio_exit();
+ printk(KERN_ERR DRVNAME ": Refusing to enable a Super-I/O "
+ "device with a base I/O port 0.\n");
+ superio_exit(sioaddr);
return -ENODEV;
}
/* Activate logical device if needed */
- val = superio_inb(SIO_REG_ENABLE);
- if (!(val & 0x01))
- superio_outb(SIO_REG_ENABLE, val | 0x01);
+ val = superio_inb(sioaddr, SIO_REG_ENABLE);
+ if (!(val & 0x01)) {
+ printk(KERN_WARNING DRVNAME ": Forcibly enabling Super-I/O. "
+ "Sensor is probably unusable.\n");
+ superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
+ }
+
+ superio_exit(sioaddr);
+ pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, *addr);
+ sio_data->sioreg = sioaddr;
- superio_exit();
return 0;
}
+/* when Super-I/O functions move to a separate file, the Super-I/O
+ * bus will manage the lifetime of the device and this module will only keep
+ * track of the w83627ehf driver. But since we platform_device_alloc(), we
+ * must keep track of the device */
+static struct platform_device *pdev;
+
static int __init sensors_w83627ehf_init(void)
{
- if (w83627ehf_find(0x2e, &address)
- && w83627ehf_find(0x4e, &address))
+ int err;
+ unsigned short address;
+ struct resource res;
+ struct w83627ehf_sio_data sio_data;
+
+ /* initialize sio_data->kind and sio_data->sioreg.
+ *
+ * when Super-I/O functions move to a separate file, the Super-I/O
+ * driver will probe 0x2e and 0x4e and auto-detect the presence of a
+ * w83627ehf hardware monitor, and call probe() */
+ if (w83627ehf_find(0x2e, &address, &sio_data) &&
+ w83627ehf_find(0x4e, &address, &sio_data))
return -ENODEV;
- return i2c_isa_add_driver(&w83627ehf_driver);
+ err = platform_driver_register(&w83627ehf_driver);
+ if (err)
+ goto exit;
+
+ if (!(pdev = platform_device_alloc(DRVNAME, address))) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit_unregister;
+ }
+
+ err = platform_device_add_data(pdev, &sio_data,
+ sizeof(struct w83627ehf_sio_data));
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+
+ memset(&res, 0, sizeof(res));
+ res.name = DRVNAME;
+ res.start = address + IOREGION_OFFSET;
+ res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
+ res.flags = IORESOURCE_IO;
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ /* platform_device_add calls probe() */
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit_unregister:
+ platform_driver_unregister(&w83627ehf_driver);
+exit:
+ return err;
}
static void __exit sensors_w83627ehf_exit(void)
{
- i2c_isa_del_driver(&w83627ehf_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&w83627ehf_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 12cb40a975d..1ce78179b00 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -220,6 +220,18 @@ static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
+#define W83627HF_REG_PWM_FREQ 0x5C /* Only for the 627HF */
+
+#define W83637HF_REG_PWM_FREQ1 0x00 /* 697HF/687THF too */
+#define W83637HF_REG_PWM_FREQ2 0x02 /* 697HF/687THF too */
+#define W83637HF_REG_PWM_FREQ3 0x10 /* 687THF too */
+
+static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1,
+ W83637HF_REG_PWM_FREQ2,
+ W83637HF_REG_PWM_FREQ3 };
+
+#define W83627HF_BASE_PWM_FREQ 46870
+
#define W83781D_REG_I2C_ADDR 0x48
#define W83781D_REG_I2C_SUBADDR 0x4A
@@ -267,6 +279,49 @@ static int TEMP_FROM_REG(u8 reg)
#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+static inline unsigned long pwm_freq_from_reg_627hf(u8 reg)
+{
+ unsigned long freq;
+ freq = W83627HF_BASE_PWM_FREQ >> reg;
+ return freq;
+}
+static inline u8 pwm_freq_to_reg_627hf(unsigned long val)
+{
+ u8 i;
+ /* Only 5 dividers (1 2 4 8 16)
+ Search for the nearest available frequency */
+ for (i = 0; i < 4; i++) {
+ if (val > (((W83627HF_BASE_PWM_FREQ >> i) +
+ (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2))
+ break;
+ }
+ return i;
+}
+
+static inline unsigned long pwm_freq_from_reg(u8 reg)
+{
+ /* Clock bit 8 -> 180 kHz or 24 MHz */
+ unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL;
+
+ reg &= 0x7f;
+ /* This should not happen but anyway... */
+ if (reg == 0)
+ reg++;
+ return (clock / (reg << 8));
+}
+static inline u8 pwm_freq_to_reg(unsigned long val)
+{
+ /* Minimum divider value is 0x01 and maximum is 0x7F */
+ if (val >= 93750) /* The highest we can do */
+ return 0x01;
+ if (val >= 720) /* Use 24 MHz clock */
+ return (24000000UL / (val << 8));
+ if (val < 6) /* The lowest we can do */
+ return 0xFF;
+ else /* Use 180 kHz clock */
+ return (0x80 | (180000UL / (val << 8)));
+}
+
#define BEEP_MASK_FROM_REG(val) (val)
#define BEEP_MASK_TO_REG(val) ((val) & 0xffffff)
#define BEEP_ENABLE_TO_REG(val) ((val)?1:0)
@@ -316,6 +371,7 @@ struct w83627hf_data {
u32 beep_mask; /* Register encoding, combined */
u8 beep_enable; /* Boolean */
u8 pwm[3]; /* Register value */
+ u8 pwm_freq[3]; /* Register value */
u16 sens[3]; /* 782D/783S only.
1 = pentium diode; 2 = 3904 diode;
3000-5000 = thermistor beta.
@@ -852,6 +908,64 @@ sysfs_pwm(2);
sysfs_pwm(3);
static ssize_t
+show_pwm_freq_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ if (data->type == w83627hf)
+ return sprintf(buf, "%ld\n",
+ pwm_freq_from_reg_627hf(data->pwm_freq[nr - 1]));
+ else
+ return sprintf(buf, "%ld\n",
+ pwm_freq_from_reg(data->pwm_freq[nr - 1]));
+}
+
+static ssize_t
+store_pwm_freq_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ static const u8 mask[]={0xF8, 0x8F};
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+
+ if (data->type == w83627hf) {
+ data->pwm_freq[nr - 1] = pwm_freq_to_reg_627hf(val);
+ w83627hf_write_value(data, W83627HF_REG_PWM_FREQ,
+ (data->pwm_freq[nr - 1] << ((nr - 1)*4)) |
+ (w83627hf_read_value(data,
+ W83627HF_REG_PWM_FREQ) & mask[nr - 1]));
+ } else {
+ data->pwm_freq[nr - 1] = pwm_freq_to_reg(val);
+ w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr - 1],
+ data->pwm_freq[nr - 1]);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define sysfs_pwm_freq(offset) \
+static ssize_t show_regs_pwm_freq_##offset(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ return show_pwm_freq_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_pwm_freq_##offset(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ return store_pwm_freq_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \
+ show_regs_pwm_freq_##offset, store_regs_pwm_freq_##offset);
+
+sysfs_pwm_freq(1);
+sysfs_pwm_freq(2);
+sysfs_pwm_freq(3);
+
+static ssize_t
show_sensor_reg(struct device *dev, char *buf, int nr)
{
struct w83627hf_data *data = w83627hf_update_device(dev);
@@ -1077,6 +1191,9 @@ static struct attribute *w83627hf_attributes_opt[] = {
&dev_attr_pwm3.attr,
+ &dev_attr_pwm1_freq.attr,
+ &dev_attr_pwm2_freq.attr,
+ &dev_attr_pwm3_freq.attr,
NULL
};
@@ -1139,7 +1256,9 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
|| (err = device_create_file(dev, &dev_attr_in5_max))
|| (err = device_create_file(dev, &dev_attr_in6_input))
|| (err = device_create_file(dev, &dev_attr_in6_min))
- || (err = device_create_file(dev, &dev_attr_in6_max)))
+ || (err = device_create_file(dev, &dev_attr_in6_max))
+ || (err = device_create_file(dev, &dev_attr_pwm1_freq))
+ || (err = device_create_file(dev, &dev_attr_pwm2_freq)))
goto ERROR4;
if (data->type != w83697hf)
@@ -1169,6 +1288,12 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
if ((err = device_create_file(dev, &dev_attr_pwm3)))
goto ERROR4;
+ if (data->type == w83637hf || data->type == w83687thf)
+ if ((err = device_create_file(dev, &dev_attr_pwm1_freq))
+ || (err = device_create_file(dev, &dev_attr_pwm2_freq))
+ || (err = device_create_file(dev, &dev_attr_pwm3_freq)))
+ goto ERROR4;
+
data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
@@ -1181,6 +1306,7 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
sysfs_remove_group(&dev->kobj, &w83627hf_group);
sysfs_remove_group(&dev->kobj, &w83627hf_group_opt);
ERROR3:
+ platform_set_drvdata(pdev, NULL);
kfree(data);
ERROR1:
release_region(res->start, WINB_REGION_SIZE);
@@ -1193,11 +1319,11 @@ static int __devexit w83627hf_remove(struct platform_device *pdev)
struct w83627hf_data *data = platform_get_drvdata(pdev);
struct resource *res;
- platform_set_drvdata(pdev, NULL);
hwmon_device_unregister(data->class_dev);
sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -1472,6 +1598,20 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
(data->type == w83627hf || data->type == w83697hf))
break;
}
+ if (data->type == w83627hf) {
+ u8 tmp = w83627hf_read_value(data,
+ W83627HF_REG_PWM_FREQ);
+ data->pwm_freq[0] = tmp & 0x07;
+ data->pwm_freq[1] = (tmp >> 4) & 0x07;
+ } else if (data->type != w83627thf) {
+ for (i = 1; i <= 3; i++) {
+ data->pwm_freq[i - 1] =
+ w83627hf_read_value(data,
+ W83637HF_REG_PWM_FREQ[i - 1]);
+ if (i == 2 && (data->type == w83697hf))
+ break;
+ }
+ }
data->temp = w83627hf_read_value(data, W83781D_REG_TEMP(1));
data->temp_max =
@@ -1548,15 +1688,12 @@ static int __init w83627hf_device_add(unsigned short address,
goto exit_device_put;
}
- pdev->dev.platform_data = kmalloc(sizeof(struct w83627hf_sio_data),
- GFP_KERNEL);
- if (!pdev->dev.platform_data) {
- err = -ENOMEM;
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct w83627hf_sio_data));
+ if (err) {
printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
goto exit_device_put;
}
- memcpy(pdev->dev.platform_data, sio_data,
- sizeof(struct w83627hf_sio_data));
err = platform_device_add(pdev);
if (err) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 15:10:20 +0000