diff options
Diffstat (limited to 'drivers/hwmon')
40 files changed, 1407 insertions, 1413 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7230d4e0819..99cdc612d2c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -406,13 +406,14 @@ config SENSORS_W83L785TS will be called w83l785ts. config SENSORS_W83627HF - tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" - depends on HWMON && I2C && EXPERIMENTAL + tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on HWMON && I2C select I2C_ISA select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series - of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF + of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and + W83697HF. This driver can also be built as a module. If so, the module will be called w83627hf. diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 665612729cb..2b6e74dd4a8 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -26,6 +26,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ @@ -92,7 +93,7 @@ struct adm1021_data { struct class_device *class_dev; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -162,10 +163,10 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co struct adm1021_data *data = i2c_get_clientdata(client); \ int temp = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = TEMP_TO_REG(temp); \ adm1021_write_value(client, reg, data->value); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } set(temp_max, ADM1021_REG_TOS_W); @@ -275,7 +276,7 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) strlcpy(new_client->name, type_name, I2C_NAME_SIZE); data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -351,7 +352,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct adm1021_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -375,7 +376,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 9331c56d2ba..a4c859c9fbf 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -53,6 +53,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> /* * Addresses to scan @@ -133,7 +134,7 @@ static struct i2c_driver adm1025_driver = { struct adm1025_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -207,11 +208,11 @@ static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute struct adm1025_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \ i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \ data->in_min[offset]); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } \ static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ @@ -221,11 +222,11 @@ static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute struct adm1025_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \ i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \ data->in_max[offset]); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } \ static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ @@ -247,11 +248,11 @@ static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribut struct adm1025_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->temp_min[offset-1] = TEMP_TO_REG(val); \ i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \ data->temp_min[offset-1]); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } \ static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ @@ -261,11 +262,11 @@ static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribut struct adm1025_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->temp_max[offset-1] = TEMP_TO_REG(val); \ i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \ data->temp_max[offset-1]); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } \ static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ @@ -404,7 +405,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) /* We can fill in the remaining client fields */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -523,7 +524,7 @@ static struct adm1025_data *adm1025_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct adm1025_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { int i; @@ -558,7 +559,7 @@ static struct adm1025_data *adm1025_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index fefe6e74fd0..6d4f8b8d358 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -32,6 +32,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; @@ -260,10 +261,10 @@ struct pwm_data { struct adm1026_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; int valid; /* !=0 if following fields are valid */ unsigned long last_reading; /* In jiffies */ unsigned long last_config; /* In jiffies */ @@ -298,9 +299,8 @@ static int adm1026_attach_adapter(struct i2c_adapter *adapter); static int adm1026_detect(struct i2c_adapter *adapter, int address, int kind); static int adm1026_detach_client(struct i2c_client *client); -static int adm1026_read_value(struct i2c_client *client, u8 register); -static int adm1026_write_value(struct i2c_client *client, u8 register, - int value); +static int adm1026_read_value(struct i2c_client *client, u8 reg); +static int adm1026_write_value(struct i2c_client *client, u8 reg, int value); static void adm1026_print_gpio(struct i2c_client *client); static void adm1026_fixup_gpio(struct i2c_client *client); static struct adm1026_data *adm1026_update_device(struct device *dev); @@ -575,7 +575,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev) int i; long value, alarms, gpio; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (!data->valid || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) { /* Things that change quickly */ @@ -710,7 +710,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev) dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n"); data->vid = (data->gpio >> 11) & 0x1f; data->valid = 1; - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } @@ -739,10 +739,10 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = INS_TO_REG(nr, val); adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, @@ -762,10 +762,10 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = INS_TO_REG(nr, val); adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -813,10 +813,10 @@ static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, c struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET); adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf) @@ -831,10 +831,10 @@ static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, c struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET); adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -874,11 +874,11 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]); adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -939,7 +939,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, if (new_div == 0) { return -EINVAL; } - down(&data->update_lock); + mutex_lock(&data->update_lock); orig_div = data->fan_div[nr]; data->fan_div[nr] = DIV_FROM_REG(new_div); @@ -958,7 +958,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, if (data->fan_div[nr] != orig_div) { fixup_fan_min(dev,nr,orig_div); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1001,11 +1001,11 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); adm1026_write_value(client, ADM1026_REG_TEMP_MIN[nr], data->temp_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, @@ -1025,11 +1025,11 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); adm1026_write_value(client, ADM1026_REG_TEMP_MAX[nr], data->temp_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1064,11 +1064,11 @@ static ssize_t set_temp_offset(struct device *dev, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_offset[nr] = TEMP_TO_REG(val); adm1026_write_value(client, ADM1026_REG_TEMP_OFFSET[nr], data->temp_offset[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1115,11 +1115,11 @@ static ssize_t set_temp_auto_point1_temp(struct device *dev, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_tmin[nr] = TEMP_TO_REG(val); adm1026_write_value(client, ADM1026_REG_TEMP_TMIN[nr], data->temp_tmin[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1150,11 +1150,11 @@ static ssize_t set_temp_crit_enable(struct device *dev, int val = simple_strtol(buf, NULL, 10); if ((val == 1) || (val==0)) { - down(&data->update_lock); + mutex_lock(&data->update_lock); data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4); adm1026_write_value(client, ADM1026_REG_CONFIG1, data->config1); - up(&data->update_lock); + mutex_unlock(&data->update_lock); } return count; } @@ -1184,11 +1184,11 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_crit[nr] = TEMP_TO_REG(val); adm1026_write_value(client, ADM1026_REG_TEMP_THERM[nr], data->temp_crit[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1212,10 +1212,10 @@ static ssize_t set_analog_out_reg(struct device *dev, struct device_attribute *a struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->analog_out = DAC_TO_REG(val); adm1026_write_value(client, ADM1026_REG_DAC, data->analog_out); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1267,7 +1267,7 @@ static ssize_t set_alarm_mask(struct device *dev, struct device_attribute *attr, int val = simple_strtol(buf, NULL, 10); unsigned long mask; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->alarm_mask = val & 0x7fffffff; mask = data->alarm_mask | (data->gpio_mask & 0x10000 ? 0x80000000 : 0); @@ -1282,7 +1282,7 @@ static ssize_t set_alarm_mask(struct device *dev, struct device_attribute *attr, mask >>= 8; adm1026_write_value(client, ADM1026_REG_MASK4, mask & 0xff); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1303,7 +1303,7 @@ static ssize_t set_gpio(struct device *dev, struct device_attribute *attr, const int val = simple_strtol(buf, NULL, 10); long gpio; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->gpio = val & 0x1ffff; gpio = data->gpio; adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff); @@ -1311,7 +1311,7 @@ static ssize_t set_gpio(struct device *dev, struct device_attribute *attr, const adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff); gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f); adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1331,7 +1331,7 @@ static ssize_t set_gpio_mask(struct device *dev, struct device_attribute *attr, int val = simple_strtol(buf, NULL, 10); long mask; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->gpio_mask = val & 0x1ffff; mask = data->gpio_mask; adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff); @@ -1339,7 +1339,7 @@ static ssize_t set_gpio_mask(struct device *dev, struct device_attribute *attr, adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff); mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f); adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1359,10 +1359,10 @@ static ssize_t set_pwm_reg(struct device *dev, struct device_attribute *attr, co if (data->pwm1.enable == 1) { int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm1.pwm = PWM_TO_REG(val); adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm); - up(&data->update_lock); + mutex_unlock(&data->update_lock); } return count; } @@ -1378,14 +1378,14 @@ static ssize_t set_auto_pwm_min(struct device *dev, struct device_attribute *att struct adm1026_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255); if (data->pwm1.enable == 2) { /* apply immediately */ data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) | PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_auto_pwm_max(struct device *dev, struct device_attribute *attr, char *buf) @@ -1406,7 +1406,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, int old_enable; if ((val >= 0) && (val < 3)) { - down(&data->update_lock); + mutex_lock(&data->update_lock); old_enable = data->pwm1.enable; data->pwm1.enable = val; data->config1 = (data->config1 & ~CFG1_PWM_AFC) @@ -1424,7 +1424,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); } return count; } @@ -1541,7 +1541,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, /* Fill in the remaining client fields */ data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index d0639796608..3bf2da621ae 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -28,6 +28,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* Following macros takes channel parameter starting from 0 to 2 */ #define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr)) @@ -70,7 +71,7 @@ typedef u8 auto_chan_table_t[8][2]; struct adm1031_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; int chip_type; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -262,10 +263,10 @@ set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr) old_fan_mode = data->conf1; - down(&data->update_lock); + mutex_lock(&data->update_lock); if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, ®))) { - up(&data->update_lock); + mutex_unlock(&data->update_lock); return ret; } if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ @@ -288,7 +289,7 @@ set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr) } data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -329,11 +330,11 @@ set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr) struct adm1031_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), data->auto_temp[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr) @@ -349,11 +350,11 @@ set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr) struct adm1031_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]); adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), data->temp_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -405,11 +406,11 @@ set_pwm(struct device *dev, const char *buf, size_t count, int nr) int val = simple_strtol(buf, NULL, 10); int reg; - down(&data->update_lock); + mutex_lock(&data->update_lock); if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && (((val>>4) & 0xf) != 5)) { /* In automatic mode, the only PWM accepted is 33% */ - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } data->pwm[nr] = PWM_TO_REG(val); @@ -417,7 +418,7 @@ set_pwm(struct device *dev, const char *buf, size_t count, int nr) adm1031_write_value(client, ADM1031_REG_PWM, nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf) : (data->pwm[nr] & 0xf) | (reg & 0xf0)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -511,7 +512,7 @@ set_fan_min(struct device *dev, const char *buf, size_t count, int nr) struct adm1031_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (val) { data->fan_min[nr] = FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr])); @@ -519,7 +520,7 @@ set_fan_min(struct device *dev, const char *buf, size_t count, int nr) data->fan_min[nr] = 0xff; } adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t @@ -540,7 +541,7 @@ set_fan_div(struct device *dev, const char *buf, size_t count, int nr) if (tmp == 0xff) return -EINVAL; - down(&data->update_lock); + mutex_lock(&data->update_lock); old_div = FAN_DIV_FROM_REG(data->fan_div[nr]); data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]); new_min = data->fan_min[nr] * old_div / @@ -553,7 +554,7 @@ set_fan_div(struct device *dev, const char *buf, size_t count, int nr) data->fan_div[nr]); adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -627,11 +628,11 @@ set_temp_min(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtol(buf, NULL, 10); val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), data->temp_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t @@ -643,11 +644,11 @@ set_temp_max(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtol(buf, NULL, 10); val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), data->temp_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t @@ -659,11 +660,11 @@ set_temp_crit(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtol(buf, NULL, 10); val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_crit[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), data->temp_crit[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -778,7 +779,7 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -891,7 +892,7 @@ static struct adm1031_data *adm1031_update_device(struct device *dev) struct adm1031_data *data = i2c_get_clientdata(client); int chan; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -965,7 +966,7 @@ static struct adm1031_data *adm1031_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 5ddc22fea4a..43f6991b588 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -49,6 +49,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, @@ -150,7 +151,7 @@ struct adm9240_data { enum chips type; struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; unsigned long last_updated_measure; unsigned long last_updated_config; @@ -195,11 +196,11 @@ static ssize_t set_max(struct device *dev, struct device_attribute *devattr, struct adm9240_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[attr->index] = TEMP_TO_REG(val); i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index), data->temp_max[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -246,11 +247,11 @@ static ssize_t set_in_min(struct device *dev, struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[attr->index] = IN_TO_REG(val, attr->index); i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index), data->in_min[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -263,11 +264,11 @@ static ssize_t set_in_max(struct device *dev, struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[attr->index] = IN_TO_REG(val, attr->index); i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index), data->in_max[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -350,7 +351,7 @@ static ssize_t set_fan_min(struct device *dev, int nr = attr->index; u8 new_div; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (!val) { data->fan_min[nr] = 255; @@ -390,7 +391,7 @@ static ssize_t set_fan_min(struct device *dev, i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -439,10 +440,10 @@ static ssize_t set_aout(struct device *dev, struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->aout = AOUT_TO_REG(val); i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); @@ -539,7 +540,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) /* fill in the remaining client fields and attach */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->type = kind; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); if ((err = i2c_attach_client(new_client))) goto exit_free; @@ -691,7 +692,7 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) struct adm9240_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); /* minimum measurement cycle: 1.75 seconds */ if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4)) @@ -771,7 +772,7 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) data->last_updated_config = jiffies; data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index ae9de63cf2e..65b2709f750 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -44,6 +44,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/jiffies.h> +#include <linux/mutex.h> #include "lm75.h" /* @@ -182,10 +183,10 @@ static u8 DIV_TO_REG(long val) struct asb100_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; unsigned long last_updated; /* In jiffies */ /* array of 2 pointers to subclients */ @@ -245,11 +246,11 @@ static ssize_t set_in_##reg(struct device *dev, const char *buf, \ struct asb100_data *data = i2c_get_clientdata(client); \ unsigned long val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->in_##reg[nr] = IN_TO_REG(val); \ asb100_write_value(client, ASB100_REG_IN_##REG(nr), \ data->in_##reg[nr]); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } @@ -331,10 +332,10 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, struct asb100_data *data = i2c_get_clientdata(client); u32 val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -351,7 +352,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, unsigned long val = simple_strtoul(buf, NULL, 10); int reg; - down(&data->update_lock); + mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); @@ -381,7 +382,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -461,7 +462,7 @@ static ssize_t set_##reg(struct device *dev, const char *buf, \ struct asb100_data *data = i2c_get_clientdata(client); \ unsigned long val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ switch (nr) { \ case 1: case 2: \ data->reg[nr] = LM75_TEMP_TO_REG(val); \ @@ -472,7 +473,7 @@ static ssize_t set_##reg(struct device *dev, const char *buf, \ } \ asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \ data->reg[nr]); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } @@ -574,11 +575,11 @@ static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr, const struct asb100_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm &= 0x80; /* keep the enable bit */ data->pwm |= (0x0f & ASB100_PWM_TO_REG(val)); asb100_write_value(client, ASB100_REG_PWM1, data->pwm); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -595,11 +596,11 @@ static ssize_t set_pwm_enable1(struct device *dev, struct device_attribute *attr struct asb100_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm &= 0x0f; /* keep the duty cycle bits */ data->pwm |= (val ? 0x80 : 0x00); asb100_write_value(client, ASB100_REG_PWM1, data->pwm); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -729,7 +730,7 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) } new_client = &data->client; - init_MUTEX(&data->lock); + mutex_init(&data->lock); i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; @@ -789,7 +790,7 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -885,7 +886,7 @@ static int asb100_read_value(struct i2c_client *client, u16 reg) struct i2c_client *cl; int res, bank; - down(&data->lock); + mutex_lock(&data->lock); bank = (reg >> 8) & 0x0f; if (bank > 2) @@ -919,7 +920,7 @@ static int asb100_read_value(struct i2c_client *client, u16 reg) if (bank > 2) i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); - up(&data->lock); + mutex_unlock(&data->lock); return res; } @@ -930,7 +931,7 @@ static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value) struct i2c_client *cl; int bank; - down(&data->lock); + mutex_lock(&data->lock); bank = (reg >> 8) & 0x0f; if (bank > 2) @@ -960,7 +961,7 @@ static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value) if (bank > 2) i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); - up(&data->lock); + mutex_unlock(&data->lock); } static void asb100_init_client(struct i2c_client *client) @@ -984,7 +985,7 @@ static struct asb100_data *asb100_update_device(struct device *dev) struct asb100_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -1042,7 +1043,7 @@ static struct asb100_data *asb100_update_device(struct device *dev) dev_dbg(&client->dev, "... device update complete\n"); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index b0c490073c8..728a1e8b919 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -26,6 +26,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("System voltages control via Attansic ATXP1"); @@ -60,7 +61,7 @@ static struct i2c_driver atxp1_driver = { struct atxp1_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; unsigned long last_updated; u8 valid; struct { @@ -80,7 +81,7 @@ static struct atxp1_data * atxp1_update_device(struct device *dev) client = to_i2c_client(dev); data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { @@ -93,7 +94,7 @@ static struct atxp1_data * atxp1_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return(data); } @@ -309,7 +310,7 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); err = i2c_attach_client(new_client); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 203f9c7abb2..478eb4bb857 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -28,6 +28,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> #include "lm75.h" /* Addresses to scan */ @@ -72,7 +73,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") struct ds1621_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -156,10 +157,10 @@ static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *at struct ds1621_data *data = ds1621_update_client(dev); \ u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = val; \ ds1621_write_value(client, reg, data->value); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } @@ -242,7 +243,7 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, /* Fill in remaining client fields and put it into the global list */ strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -297,7 +298,7 @@ static struct ds1621_data *ds1621_update_client(struct device *dev) struct ds1621_data *data = i2c_get_clientdata(client); u8 new_conf; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -327,7 +328,7 @@ static struct ds1621_data *ds1621_update_client(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index e029e0a94ec..885465df6e6 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -30,6 +30,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> static struct platform_device *pdev; @@ -131,10 +132,10 @@ static struct resource f71805f_resource __initdata = { struct f71805f_data { unsigned short addr; const char *name; - struct semaphore lock; + struct mutex lock; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ unsigned long last_limits; /* In jiffies */ @@ -224,20 +225,20 @@ static u8 f71805f_read8(struct f71805f_data *data, u8 reg) { u8 val; - down(&data->lock); + mutex_lock(&data->lock); outb(reg, data->addr + ADDR_REG_OFFSET); val = inb(data->addr + DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return val; } static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val) { - down(&data->lock); + mutex_lock(&data->lock); outb(reg, data->addr + ADDR_REG_OFFSET); outb(val, data->addr + DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); } /* It is important to read the MSB first, because doing so latches the @@ -246,24 +247,24 @@ static u16 f71805f_read16(struct f71805f_data *data, u8 reg) { u16 val; - down(&data->lock); + mutex_lock(&data->lock); outb(reg, data->addr + ADDR_REG_OFFSET); val = inb(data->addr + DATA_REG_OFFSET) << 8; outb(++reg, data->addr + ADDR_REG_OFFSET); val |= inb(data->addr + DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return val; } static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val) { - down(&data->lock); + mutex_lock(&data->lock); outb(reg, data->addr + ADDR_REG_OFFSET); outb(val >> 8, data->addr + DATA_REG_OFFSET); outb(++reg, data->addr + ADDR_REG_OFFSET); outb(val & 0xff, data->addr + DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); } static struct f71805f_data *f71805f_update_device(struct device *dev) @@ -271,7 +272,7 @@ static struct f71805f_data *f71805f_update_device(struct device *dev) struct f71805f_data *data = dev_get_drvdata(dev); int nr; - down(&data->update_lock); + mutex_lock(&data->update_lock); /* Limit registers cache is refreshed after 60 seconds */ if (time_after(jiffies, data->last_updated + 60 * HZ) @@ -323,7 +324,7 @@ static struct f71805f_data *f71805f_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } @@ -362,10 +363,10 @@ static ssize_t set_in0_max(struct device *dev, struct device_attribute struct f71805f_data *data = dev_get_drvdata(dev); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_high[0] = in0_to_reg(val); f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -376,18 +377,14 @@ static ssize_t set_in0_min(struct device *dev, struct device_attribute struct f71805f_data *data = dev_get_drvdata(dev); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_low[0] = in0_to_reg(val); f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL); -static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max); -static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min); - static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -426,10 +423,10 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute int nr = attr->index; long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_high[nr] = in_to_reg(val); f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -442,31 +439,14 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute int nr = attr->index; long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_low[nr] = in_to_reg(val); f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define sysfs_in(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset) - -sysfs_in(1); -sysfs_in(2); -sysfs_in(3); -sysfs_in(4); -sysfs_in(5); -sysfs_in(6); -sysfs_in(7); -sysfs_in(8); - static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -495,24 +475,14 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute int nr = attr->index; long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_low[nr] = fan_to_reg(val); f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define sysfs_fan(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1) - -sysfs_fan(1); -sysfs_fan(2); -sysfs_fan(3); - static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -562,10 +532,10 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute int nr = attr->index; long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_high[nr] = temp_to_reg(val); f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -578,28 +548,14 @@ static ssize_t set_temp_hyst(struct device *dev, struct device_attribute int nr = attr->index; long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_hyst[nr] = temp_to_reg(val); f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define sysfs_temp(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \ - show_temp_hyst, set_temp_hyst, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO, \ - show_temp_type, NULL, offset - 1) - -sysfs_temp(1); -sysfs_temp(2); -sysfs_temp(3); - static ssize_t show_alarms_in(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -625,10 +581,6 @@ static ssize_t show_alarms_temp(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", (data->alarms[1] >> 3) & 0x07); } -static DEVICE_ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL); -static DEVICE_ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL); -static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL); - static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -637,7 +589,89 @@ static ssize_t show_name(struct device *dev, struct device_attribute return sprintf(buf, "%s\n", data->name); } -static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); +static struct device_attribute f71805f_dev_attr[] = { + __ATTR(in0_input, S_IRUGO, show_in0, NULL), + __ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max), + __ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min), + __ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL), + __ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL), + __ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL), + __ATTR(name, S_IRUGO, show_name, NULL), +}; + +static struct sensor_device_attribute f71805f_sensor_attr[] = { + SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), + SENSOR_ATTR(in1_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 1), + SENSOR_ATTR(in1_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 1), + SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), + SENSOR_ATTR(in2_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 2), + SENSOR_ATTR(in2_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 2), + SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), + SENSOR_ATTR(in3_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 3), + SENSOR_ATTR(in3_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 3), + SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), + SENSOR_ATTR(in4_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 4), + SENSOR_ATTR(in4_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 4), + SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), + SENSOR_ATTR(in5_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 5), + SENSOR_ATTR(in5_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 5), + SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), + SENSOR_ATTR(in6_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 6), + SENSOR_ATTR(in6_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 6), + SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), + SENSOR_ATTR(in7_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 7), + SENSOR_ATTR(in7_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 7), + SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), + SENSOR_ATTR(in8_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 8), + SENSOR_ATTR(in8_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 8), + + SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0), + SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 0), + SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst, 0), + SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0), + SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1), + SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 1), + SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst, 1), + SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1), + SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2), + SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 2), + SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst, 2), + SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2), +}; + +static struct sensor_device_attribute f71805f_fan_attr[] = { + SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), + SENSOR_ATTR(fan1_min, S_IRUGO | S_IWUSR, + show_fan_min, set_fan_min, 0), + SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), + SENSOR_ATTR(fan2_min, S_IRUGO | S_IWUSR, + show_fan_min, set_fan_min, 1), + SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), + SENSOR_ATTR(fan3_min, S_IRUGO | S_IWUSR, + show_fan_min, set_fan_min, 2), +}; /* * Device registration and initialization @@ -668,7 +702,7 @@ static int __devinit f71805f_probe(struct platform_device *pdev) { struct f71805f_data *data; struct resource *res; - int err; + int i, err; if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) { err = -ENOMEM; @@ -678,9 +712,9 @@ static int __devinit f71805f_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IO, 0); data->addr = res->start; - init_MUTEX(&data->lock); + mutex_init(&data->lock); data->name = "f71805f"; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); @@ -695,76 +729,31 @@ static int __devinit f71805f_probe(struct platform_device *pdev) f71805f_init_device(data); /* Register sysfs interface files */ - device_create_file(&pdev->dev, &dev_attr_in0_input); - device_create_file(&pdev->dev, &dev_attr_in0_max); - device_create_file(&pdev->dev, &dev_attr_in0_min); - device_create_file(&pdev->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in8_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in8_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_in8_min.dev_attr); - if (data->fan_enabled & (1 << 0)) { - device_create_file(&pdev->dev, - &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_fan1_min.dev_attr); + for (i = 0; i < ARRAY_SIZE(f71805f_dev_attr); i++) { + err = device_create_file(&pdev->dev, &f71805f_dev_attr[i]); + if (err) + goto exit_class; } - if (data->fan_enabled & (1 << 1)) { - device_create_file(&pdev->dev, - &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_fan2_min.dev_attr); + for (i = 0; i < ARRAY_SIZE(f71805f_sensor_attr); i++) { + err = device_create_file(&pdev->dev, + &f71805f_sensor_attr[i].dev_attr); + if (err) + goto exit_class; } - if (data->fan_enabled & (1 << 2)) { - device_create_file(&pdev->dev, - &sensor_dev_attr_fan3_input.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_fan3_min.dev_attr); + for (i = 0; i < ARRAY_SIZE(f71805f_fan_attr); i++) { + if (!(data->fan_enabled & (1 << (i / 2)))) + continue; + err = device_create_file(&pdev->dev, + &f71805f_fan_attr[i].dev_attr); + if (err) + goto exit_class; } - device_create_file(&pdev->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_temp1_max_hyst.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_temp2_max_hyst.dev_attr); - device_create_file(&pdev->dev, - &sensor_dev_attr_temp3_max_hyst.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_temp1_type.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_temp2_type.dev_attr); - device_create_file(&pdev->dev, &sensor_dev_attr_temp3_type.dev_attr); - device_create_file(&pdev->dev, &dev_attr_alarms_in); - device_create_file(&pdev->dev, &dev_attr_alarms_fan); - device_create_file(&pdev->dev, &dev_attr_alarms_temp); - device_create_file(&pdev->dev, &dev_attr_name); return 0; +exit_class: + dev_err(&pdev->dev, "Sysfs interface creation failed\n"); + hwmon_device_unregister(data->class_dev); exit_free: kfree(data); exit: diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c index 25409181d1e..6bc76b40763 100644 --- a/drivers/hwmon/fscher.c +++ b/drivers/hwmon/fscher.c @@ -33,6 +33,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* * Addresses to scan @@ -133,7 +134,7 @@ static struct i2c_driver fscher_driver = { struct fscher_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -332,7 +333,7 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) * global list */ strlcpy(new_client->name, "fscher", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -417,7 +418,7 @@ static struct fscher_data *fscher_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct fscher_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { @@ -457,7 +458,7 @@ static struct fscher_data *fscher_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } @@ -472,10 +473,10 @@ static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *dat /* bits 0..1, 3..7 reserved => mask with 0x04 */ unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v; fscher_write_value(client, reg, v); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -490,10 +491,10 @@ static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data, { unsigned long v = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v; fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -518,14 +519,14 @@ static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data, return -EINVAL; } - down(&data->update_lock); + mutex_lock(&data->update_lock); /* bits 2..7 reserved => mask with 0x03 */ data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03; data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v; fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -552,10 +553,10 @@ static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *da /* bits 2..7 reserved, 0 read only => mask with 0x02 */ unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v; fscher_write_value(client, reg, v); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -609,10 +610,10 @@ static ssize_t set_control(struct i2c_client *client, struct fscher_data *data, /* bits 1..7 reserved => mask with 0x01 */ unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->global_control &= ~v; fscher_write_value(client, reg, v); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -631,11 +632,11 @@ static ssize_t set_watchdog_control(struct i2c_client *client, struct /* bits 0..3 reserved => mask with 0xf0 */ unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->watchdog[2] &= ~0xf0; data->watchdog[2] |= v; fscher_write_value(client, reg, data->watchdog[2]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -651,10 +652,10 @@ static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data /* bits 0, 2..7 reserved => mask with 0x02 */ unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->watchdog[1] &= ~v; fscher_write_value(client, reg, v); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -669,10 +670,10 @@ static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data { unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->watchdog[0] = v; fscher_write_value(client, reg, data->watchdog[0]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 6d0146b5702..6dc4846b9ee 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -37,6 +37,7 @@ #include <linux/init.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* * Addresses to scan @@ -89,8 +90,8 @@ static int fscpos_attach_adapter(struct i2c_adapter *adapter); static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind); static int fscpos_detach_client(struct i2c_client *client); -static int fscpos_read_value(struct i2c_client *client, u8 register); -static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value); +static int fscpos_read_value(struct i2c_client *client, u8 reg); +static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value); static struct fscpos_data *fscpos_update_device(struct device *dev); static void fscpos_init_client(struct i2c_client *client); @@ -114,7 +115,7 @@ static struct i2c_driver fscpos_driver = { struct fscpos_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* 0 until following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -208,13 +209,13 @@ static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data return -EINVAL; } - down(&data->update_lock); + mutex_lock(&data->update_lock); /* bits 2..7 reserved => mask with 0x03 */ data->fan_ripple[nr - 1] &= ~0x03; data->fan_ripple[nr - 1] |= v; fscpos_write_value(client, reg, data->fan_ripple[nr - 1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -232,10 +233,10 @@ static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data, if (v < 0) v = 0; if (v > 255) v = 255; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm[nr - 1] = v; fscpos_write_value(client, reg, data->pwm[nr - 1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -278,11 +279,11 @@ static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data /* bits 0..3 reserved => mask with 0xf0 */ unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->wdog_control &= ~0xf0; data->wdog_control |= v; fscpos_write_value(client, reg, data->wdog_control); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -304,10 +305,10 @@ static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data return -EINVAL; } - down(&data->update_lock); + mutex_lock(&data->update_lock); data->wdog_state &= ~v; fscpos_write_value(client, reg, v); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -321,10 +322,10 @@ static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data { unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->wdog_preset = v; fscpos_write_value(client, reg, data->wdog_preset); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -483,7 +484,7 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -579,7 +580,7 @@ static struct fscpos_data *fscpos_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct fscpos_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { int i; @@ -625,7 +626,7 @@ static struct fscpos_data *fscpos_update_device(struct device *dev) data->last_updated = jiffies; data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 9e685e3a3bc..6606aabdb49 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -43,6 +43,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; @@ -120,7 +121,7 @@ struct gl518_data { struct class_device *class_dev; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -212,10 +213,10 @@ static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, c struct gl518_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = type##_TO_REG(val); \ gl518_write_value(client, reg, data->value); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } @@ -228,12 +229,12 @@ static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, c int regvalue; \ unsigned long val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ regvalue = gl518_read_value(client, reg); \ data->value = type##_TO_REG(val); \ regvalue = (regvalue & ~mask) | (data->value << shift); \ gl518_write_value(client, reg, regvalue); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } @@ -265,7 +266,7 @@ static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, c int regvalue; unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT); data->fan_min[0] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[0])); @@ -280,7 +281,7 @@ static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, c data->beep_mask &= data->alarm_mask; gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -291,7 +292,7 @@ static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, c int regvalue; unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT); data->fan_min[1] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[1])); @@ -306,7 +307,7 @@ static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, c data->beep_mask &= data->alarm_mask; gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -407,7 +408,7 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE); data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -525,7 +526,7 @@ static struct gl518_data *gl518_update_device(struct device *dev) struct gl518_data *data = i2c_get_clientdata(client); int val; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -586,7 +587,7 @@ static struct gl518_data *gl518_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index baee60e44b5..14e810f3c2c 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -29,6 +29,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> /* Type of the extra sensor */ static unsigned short extra_sensor_type; @@ -121,7 +122,7 @@ static struct i2c_driver gl520_driver = { struct gl520_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until the following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -303,7 +304,7 @@ static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, co long v = simple_strtol(buf, NULL, 10); u8 r; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (n == 0) r = VDD_TO_REG(v); @@ -317,7 +318,7 @@ static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, co else gl520_write_value(client, reg, r); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -331,7 +332,7 @@ static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, co else r = IN_TO_REG(v); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[n] = r; @@ -340,7 +341,7 @@ static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, co else gl520_write_value(client, reg, r); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -373,7 +374,7 @@ static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, c unsigned long v = simple_strtoul(buf, NULL, 10); u8 r; - down(&data->update_lock); + mutex_lock(&data->update_lock); r = FAN_TO_REG(v, data->fan_div[n - 1]); data->fan_min[n - 1] = r; @@ -390,7 +391,7 @@ static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, c data->beep_mask &= data->alarm_mask; gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -409,7 +410,7 @@ static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, c return -EINVAL; } - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_div[n - 1] = r; if (n == 1) @@ -417,7 +418,7 @@ static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, c else gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -425,10 +426,10 @@ static ssize_t set_fan_off(struct i2c_client *client, struct gl520_data *data, c { u8 r = simple_strtoul(buf, NULL, 10)?1:0; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_off = r; gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -454,10 +455,10 @@ static ssize_t set_temp_max(struct i2c_client *client, struct gl520_data *data, { long v = simple_strtol(buf, NULL, 10); - down(&data->update_lock); - data->temp_max[n - 1] = TEMP_TO_REG(v);; + mutex_lock(&data->update_lock); + data->temp_max[n - 1] = TEMP_TO_REG(v); gl520_write_value(client, reg, data->temp_max[n - 1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -465,10 +466,10 @@ static ssize_t set_temp_max_hyst(struct i2c_client *client, struct gl520_data *d { long v = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max_hyst[n - 1] = TEMP_TO_REG(v); gl520_write_value(client, reg, data->temp_max_hyst[n - 1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -491,10 +492,10 @@ static ssize_t set_beep_enable(struct i2c_client *client, struct gl520_data *dat { u8 r = simple_strtoul(buf, NULL, 10)?0:1; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->beep_enable = !r; gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -502,11 +503,11 @@ static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, { u8 r = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); r &= data->alarm_mask; data->beep_mask = r; gl520_write_value(client, reg, r); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -561,7 +562,7 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) /* Fill in the remaining client fields */ strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -685,7 +686,7 @@ static struct gl520_data *gl520_update_device(struct device *dev) struct gl520_data *data = i2c_get_clientdata(client); int val; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { @@ -750,7 +751,7 @@ static struct gl520_data *gl520_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 23a9e1ea8e3..7636c1a58f9 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -33,6 +33,7 @@ #include <linux/module.h> #include <linux/timer.h> #include <linux/dmi.h> +#include <linux/mutex.h> #include <asm/io.h> #define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */ @@ -70,10 +71,10 @@ static u8 km_activity; static int rest_x; static int rest_y; -static DECLARE_MUTEX(hdaps_sem); +static DEFINE_MUTEX(hdaps_mutex); /* - * __get_latch - Get the value from a given port. Callers must hold hdaps_sem. + * __get_latch - Get the value from a given port. Callers must hold hdaps_mutex. */ static inline u8 __get_latch(u16 port) { @@ -82,7 +83,7 @@ static inline u8 __get_latch(u16 port) /* * __check_latch - Check a port latch for a given value. Returns zero if the - * port contains the given value. Callers must hold hdaps_sem. + * port contains the given value. Callers must hold hdaps_mutex. */ static inline int __check_latch(u16 port, u8 val) { @@ -93,7 +94,7 @@ static inline int __check_latch(u16 port, u8 val) /* * __wait_latch - Wait up to 100us for a port latch to get a certain value, - * returning zero if the value is obtained. Callers must hold hdaps_sem. + * returning zero if the value is obtained. Callers must hold hdaps_mutex. */ static int __wait_latch(u16 port, u8 val) { @@ -110,7 +111,7 @@ static int __wait_latch(u16 port, u8 val) /* * __device_refresh - request a refresh from the accelerometer. Does not wait - * for refresh to complete. Callers must hold hdaps_sem. + * for refresh to complete. Callers must hold hdaps_mutex. */ static void __device_refresh(void) { @@ -124,7 +125,7 @@ static void __device_refresh(void) /* * __device_refresh_sync - request a synchronous refresh from the * accelerometer. We wait for the refresh to complete. Returns zero if - * successful and nonzero on error. Callers must hold hdaps_sem. + * successful and nonzero on error. Callers must hold hdaps_mutex. */ static int __device_refresh_sync(void) { @@ -134,7 +135,7 @@ static int __device_refresh_sync(void) /* * __device_complete - indicate to the accelerometer that we are done reading - * data, and then initiate an async refresh. Callers must hold hdaps_sem. + * data, and then initiate an async refresh. Callers must hold hdaps_mutex. */ static inline void __device_complete(void) { @@ -152,7 +153,7 @@ static int hdaps_readb_one(unsigned int port, u8 *val) { int ret; - down(&hdaps_sem); + mutex_lock(&hdaps_mutex); /* do a sync refresh -- we need to be sure that we read fresh data */ ret = __device_refresh_sync(); @@ -163,7 +164,7 @@ static int hdaps_readb_one(unsigned int port, u8 *val) __device_complete(); out: - up(&hdaps_sem); + mutex_unlock(&hdaps_mutex); return ret; } @@ -198,9 +199,9 @@ static int hdaps_read_pair(unsigned int port1, unsigned int port2, { int ret; - down(&hdaps_sem); + mutex_lock(&hdaps_mutex); ret = __hdaps_read_pair(port1, port2, val1, val2); - up(&hdaps_sem); + mutex_unlock(&hdaps_mutex); return ret; } @@ -213,7 +214,7 @@ static int hdaps_device_init(void) { int total, ret = -ENXIO; - down(&hdaps_sem); + mutex_lock(&hdaps_mutex); outb(0x13, 0x1610); outb(0x01, 0x161f); @@ -279,7 +280,7 @@ static int hdaps_device_init(void) } out: - up(&hdaps_sem); + mutex_unlock(&hdaps_mutex); return ret; } @@ -313,7 +314,7 @@ static struct platform_driver hdaps_driver = { }; /* - * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_sem. + * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mutex. */ static void hdaps_calibrate(void) { @@ -325,7 +326,7 @@ static void hdaps_mousedev_poll(unsigned long unused) int x, y; /* Cannot sleep. Try nonblockingly. If we fail, try again later. */ - if (down_trylock(&hdaps_sem)) { + if (!mutex_trylock(&hdaps_mutex)) { mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD); return; } @@ -340,7 +341,7 @@ static void hdaps_mousedev_poll(unsigned long unused) mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD); out: - up(&hdaps_sem); + mutex_unlock(&hdaps_mutex); } @@ -420,9 +421,9 @@ static ssize_t hdaps_calibrate_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - down(&hdaps_sem); + mutex_lock(&hdaps_mutex); hdaps_calibrate(); - up(&hdaps_sem); + mutex_unlock(&hdaps_mutex); return count; } diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index e497274916c..a74a44f16f5 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -54,6 +54,10 @@ (IMVP-II). You can find more information in the datasheet of Max1718 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 + The 13 specification corresponds to the Intel Pentium M series. There + doesn't seem to be any named specification for these. The conversion + tables are detailed directly in the various Pentium M datasheets: + http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm */ /* vrm is the VRM/VRD document version multiplied by 10. @@ -100,6 +104,8 @@ int vid_from_reg(int val, u8 vrm) case 17: /* Intel IMVP-II */ return(val & 0x10 ? 975 - (val & 0xF) * 25 : 1750 - val * 50); + case 13: + return(1708 - (val & 0x3f) * 16); default: /* report 0 for unknown */ printk(KERN_INFO "hwmon-vid: requested unknown VRM version\n"); return 0; @@ -129,8 +135,9 @@ struct vrm_model { static struct vrm_model vrm_models[] = { {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */ {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */ - {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 85}, /* 0.13um too */ + {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */ {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */ + {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */ {X86_VENDOR_INTEL, 0x6, ANY, ANY, 82}, /* any P6 */ {X86_VENDOR_INTEL, 0x7, ANY, ANY, 0}, /* Itanium */ {X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90}, /* P4 */ diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index dddd3eb9b38..106fa01cdb6 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -17,6 +17,7 @@ #include <linux/idr.h> #include <linux/hwmon.h> #include <linux/gfp.h> +#include <linux/spinlock.h> #define HWMON_ID_PREFIX "hwmon" #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d" @@ -24,6 +25,7 @@ static struct class *hwmon_class; static DEFINE_IDR(hwmon_idr); +static DEFINE_SPINLOCK(idr_lock); /** * hwmon_device_register - register w/ hwmon sysfs class @@ -37,20 +39,30 @@ static DEFINE_IDR(hwmon_idr); struct class_device *hwmon_device_register(struct device *dev) { struct class_device *cdev; - int id; + int id, err; - if (idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0) +again: + if (unlikely(idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0)) return ERR_PTR(-ENOMEM); - if (idr_get_new(&hwmon_idr, NULL, &id) < 0) - return ERR_PTR(-ENOMEM); + spin_lock(&idr_lock); + err = idr_get_new(&hwmon_idr, NULL, &id); + spin_unlock(&idr_lock); + + if (unlikely(err == -EAGAIN)) + goto again; + else if (unlikely(err)) + return ERR_PTR(err); id = id & MAX_ID_MASK; cdev = class_device_create(hwmon_class, NULL, MKDEV(0,0), dev, HWMON_ID_FORMAT, id); - if (IS_ERR(cdev)) + if (IS_ERR(cdev)) { + spin_lock(&idr_lock); idr_remove(&hwmon_idr, id); + spin_unlock(&idr_lock); + } return cdev; } @@ -64,9 +76,11 @@ void hwmon_device_unregister(struct class_device *cdev) { int id; - if (sscanf(cdev->class_id, HWMON_ID_FORMAT, &id) == 1) { + if (likely(sscanf(cdev->class_id, HWMON_ID_FORMAT, &id) == 1)) { class_device_unregister(cdev); + spin_lock(&idr_lock); idr_remove(&hwmon_idr, id); + spin_unlock(&idr_lock); } else dev_dbg(cdev->dev, "hwmon_device_unregister() failed: bad class ID!\n"); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index d7a9401600b..06df92b3ee4 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -41,6 +41,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> @@ -194,10 +195,10 @@ static int DIV_TO_REG(int val) struct it87_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -224,9 +225,8 @@ static int it87_isa_attach_adapter(struct i2c_adapter *adapter); static int it87_detect(struct i2c_adapter *adapter, int address, int kind); static int it87_detach_client(struct i2c_client *client); -static int it87_read_value(struct i2c_client *client, u8 register); -static int it87_write_value(struct i2c_client *client, u8 register, - u8 value); +static int it87_read_value(struct i2c_client *client, u8 reg); +static int it87_write_value(struct i2c_client *client, u8 reg, u8 value); static struct it87_data *it87_update_device(struct device *dev); static int it87_check_pwm(struct i2c_client *client); static void it87_init_client(struct i2c_client *client, struct it87_data *data); @@ -290,11 +290,11 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, struct it87_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = IN_TO_REG(val); it87_write_value(client, IT87_REG_VIN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, @@ -307,11 +307,11 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, struct it87_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = IN_TO_REG(val); it87_write_value(client, IT87_REG_VIN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -381,10 +381,10 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_high[nr] = TEMP_TO_REG(val); it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, @@ -397,10 +397,10 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_low[nr] = TEMP_TO_REG(val); it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define show_temp_offset(offset) \ @@ -440,7 +440,7 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->sensor &= ~(1 << nr); data->sensor &= ~(8 << nr); @@ -450,11 +450,11 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, else if (val == 2) data->sensor |= 8 << nr; else if (val != 0) { - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define show_sensor_offset(offset) \ @@ -524,7 +524,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, int val = simple_strtol(buf, NULL, 10); u8 reg = it87_read_value(client, IT87_REG_FAN_DIV); - down(&data->update_lock); + mutex_lock(&data->update_lock); switch (nr) { case 0: data->fan_div[nr] = reg & 0x07; break; case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break; @@ -533,7 +533,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, @@ -548,7 +548,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, int i, min[3]; u8 old; - down(&data->update_lock); + mutex_lock(&data->update_lock); old = it87_read_value(client, IT87_REG_FAN_DIV); for (i = 0; i < 3; i++) @@ -576,7 +576,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i])); it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_pwm_enable(struct device *dev, @@ -589,7 +589,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (val == 0) { int tmp; @@ -606,11 +606,11 @@ static ssize_t set_pwm_enable(struct device *dev, /* set saved pwm value, clear FAN_CTLX PWM mode bit */ it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); } else { - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, @@ -626,11 +626,11 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, if (val < 0 || val > 255) return -EINVAL; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->manual_pwm_ctl[nr] = val; if (data->fan_main_ctrl & (1 << nr)) it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -776,7 +776,7 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind) new_client = &data->client; if (is_isa) - init_MUTEX(&data->lock); + mutex_init(&data->lock); i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; @@ -823,7 +823,7 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind) strlcpy(new_client->name, name, I2C_NAME_SIZE); data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -950,10 +950,10 @@ static int it87_read_value(struct i2c_client *client, u8 reg) int res; if (i2c_is_isa_client(client)) { - down(&data->lock); + mutex_lock(&data->lock); outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); res = inb_p(client->addr + IT87_DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return res; } else return i2c_smbus_read_byte_data(client, reg); @@ -969,10 +969,10 @@ static int it87_write_value(struct i2c_client *client, u8 reg, u8 value) struct it87_data *data = i2c_get_clientdata(client); if (i2c_is_isa_client(client)) { - down(&data->lock); + mutex_lock(&data->lock); outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); outb_p(value, client->addr + IT87_DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return 0; } else return i2c_smbus_write_byte_data(client, reg, value); @@ -1098,7 +1098,7 @@ static struct it87_data *it87_update_device(struct device *dev) struct it87_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -1160,7 +1160,7 @@ static struct it87_data *it87_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 6b1aa7ef552..071f0fc6ade 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -45,6 +45,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* * Addresses to scan @@ -153,7 +154,7 @@ static struct i2c_driver lm63_driver = { struct lm63_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -192,13 +193,13 @@ static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, struct lm63_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan[1] = FAN_TO_REG(val); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, data->fan[1] & 0xFF); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, data->fan[1] >> 8); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -222,12 +223,12 @@ static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy, return -EPERM; val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm1_value = val <= 0 ? 0 : val >= 255 ? 2 * data->pwm1_freq : (val * data->pwm1_freq * 2 + 127) / 255; i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -253,10 +254,10 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy, struct lm63_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp8[1] = TEMP8_TO_REG(val); i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -284,13 +285,13 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp11[nr] = TEMP11_TO_REG(val); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], data->temp11[nr] >> 8); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], data->temp11[nr] & 0xff); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -314,11 +315,11 @@ static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute * long val = simple_strtol(buf, NULL, 10); long hyst; - down(&data->update_lock); + mutex_lock(&data->update_lock); hyst = TEMP8_FROM_REG(data->temp8[2]) - val; i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, HYST_TO_REG(hyst)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -427,7 +428,7 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -530,7 +531,7 @@ static struct lm63_data *lm63_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { if (data->config & 0x04) { /* tachometer enabled */ @@ -582,7 +583,7 @@ static struct lm63_data *lm63_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 74ca2c8c61c..fc25b90ec24 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -25,6 +25,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> #include "lm75.h" @@ -47,7 +48,7 @@ I2C_CLIENT_INSMOD_1(lm75); struct lm75_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ u16 temp_input; /* Register values */ @@ -91,10 +92,10 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co struct lm75_data *data = i2c_get_clientdata(client); \ int temp = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = LM75_TEMP_TO_REG(temp); \ lm75_write_value(client, reg, data->value); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } set(temp_max, LM75_REG_TEMP_OS); @@ -188,7 +189,7 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) /* Fill in the remaining client fields and put it into the global list */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -264,7 +265,7 @@ static struct lm75_data *lm75_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm75_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -277,7 +278,7 @@ static struct lm75_data *lm75_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index df9e02aaa70..459cc977380 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -32,6 +32,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; @@ -51,7 +52,7 @@ I2C_CLIENT_INSMOD_1(lm77); struct lm77_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; unsigned long last_updated; /* In jiffies */ int temp_input; /* Temperatures */ @@ -139,10 +140,10 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co struct lm77_data *data = i2c_get_clientdata(client); \ long val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = val; \ lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value)); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } @@ -157,11 +158,11 @@ static ssize_t set_temp_crit_hyst(struct device *dev, struct device_attribute *a struct lm77_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_hyst = data->temp_crit - val; lm77_write_value(client, LM77_REG_TEMP_HYST, LM77_TEMP_TO_REG(data->temp_hyst)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -173,7 +174,7 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, long val = simple_strtoul(buf, NULL, 10); int oldcrithyst; - down(&data->update_lock); + mutex_lock(&data->update_lock); oldcrithyst = data->temp_crit - data->temp_hyst; data->temp_crit = val; data->temp_hyst = data->temp_crit - oldcrithyst; @@ -181,7 +182,7 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, LM77_TEMP_TO_REG(data->temp_crit)); lm77_write_value(client, LM77_REG_TEMP_HYST, LM77_TEMP_TO_REG(data->temp_hyst)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -306,7 +307,7 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) /* Fill in the remaining client fields and put it into the global list */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -380,7 +381,7 @@ static struct lm77_data *lm77_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm77_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -406,7 +407,7 @@ static struct lm77_data *lm77_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index e404001e20d..94be3d797e6 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -27,6 +27,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> /* Addresses to scan */ @@ -131,10 +132,10 @@ static inline int TEMP_FROM_REG(s8 val) struct lm78_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -157,8 +158,8 @@ static int lm78_isa_attach_adapter(struct i2c_adapter *adapter); static int lm78_detect(struct i2c_adapter *adapter, int address, int kind); static int lm78_detach_client(struct i2c_client *client); -static int lm78_read_value(struct i2c_client *client, u8 register); -static int lm78_write_value(struct i2c_client *client, u8 register, u8 value); +static int lm78_read_value(struct i2c_client *client, u8 reg); +static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value); static struct lm78_data *lm78_update_device(struct device *dev); static void lm78_init_client(struct i2c_client *client); @@ -207,10 +208,10 @@ static ssize_t set_in_min(struct device *dev, const char *buf, struct lm78_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = IN_TO_REG(val); lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -221,10 +222,10 @@ static ssize_t set_in_max(struct device *dev, const char *buf, struct lm78_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = IN_TO_REG(val); lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -288,10 +289,10 @@ static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, struct lm78_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_over = TEMP_TO_REG(val); lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -307,10 +308,10 @@ static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, struct lm78_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_hyst = TEMP_TO_REG(val); lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -342,10 +343,10 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, struct lm78_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -368,7 +369,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, unsigned long min; u8 reg; - down(&data->update_lock); + mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); @@ -380,7 +381,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, default: dev_err(&client->dev, "fan_div value %ld not " "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } @@ -398,7 +399,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -548,7 +549,7 @@ static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) new_client = &data->client; if (is_isa) - init_MUTEX(&data->lock); + mutex_init(&data->lock); i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; @@ -598,7 +599,7 @@ static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -697,10 +698,10 @@ static int lm78_read_value(struct i2c_client *client, u8 reg) int res; if (i2c_is_isa_client(client)) { struct lm78_data *data = i2c_get_clientdata(client); - down(&data->lock); + mutex_lock(&data->lock); outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); res = inb_p(client->addr + LM78_DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return res; } else return i2c_smbus_read_byte_data(client, reg); @@ -717,10 +718,10 @@ static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value) { if (i2c_is_isa_client(client)) { struct lm78_data *data = i2c_get_clientdata(client); - down(&data->lock); + mutex_lock(&data->lock); outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); outb_p(value, client->addr + LM78_DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return 0; } else return i2c_smbus_write_byte_data(client, reg, value); @@ -742,7 +743,7 @@ static struct lm78_data *lm78_update_device(struct device *dev) struct lm78_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -786,7 +787,7 @@ static struct lm78_data *lm78_update_device(struct device *dev) data->fan_div[2] = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index c9a7cdea7bd..f72120d08c4 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -28,6 +28,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, @@ -108,7 +109,7 @@ static inline long TEMP_FROM_REG(u16 temp) struct lm80_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -191,10 +192,10 @@ static ssize_t set_in_##suffix(struct device *dev, struct device_attribute *attr struct lm80_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock);\ + mutex_lock(&data->update_lock);\ data->value = IN_TO_REG(val); \ lm80_write_value(client, reg, data->value); \ - up(&data->update_lock);\ + mutex_unlock(&data->update_lock);\ return count; \ } set_in(min0, in_min[0], LM80_REG_IN_MIN(0)); @@ -241,10 +242,10 @@ static ssize_t set_fan_##suffix(struct device *dev, struct device_attribute *att struct lm80_data *data = i2c_get_clientdata(client); \ long val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock);\ + mutex_lock(&data->update_lock);\ data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \ lm80_write_value(client, reg, data->value); \ - up(&data->update_lock);\ + mutex_unlock(&data->update_lock);\ return count; \ } set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]); @@ -263,7 +264,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, u8 reg; /* Save fan_min */ - down(&data->update_lock); + mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); @@ -275,7 +276,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, default: dev_err(&client->dev, "fan_div value %ld not " "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } @@ -286,7 +287,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, /* Restore fan_min */ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -325,10 +326,10 @@ static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *at struct lm80_data *data = i2c_get_clientdata(client); \ long val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = TEMP_LIMIT_TO_REG(val); \ lm80_write_value(client, reg, data->value); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX); @@ -437,7 +438,7 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) /* Fill in the remaining client fields and put it into the global list */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -545,7 +546,7 @@ static struct lm80_data *lm80_update_device(struct device *dev) struct lm80_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { dev_dbg(&client->dev, "Starting lm80 update\n"); @@ -585,7 +586,7 @@ static struct lm80_data *lm80_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index 26dfa9e216c..aac4ec2bf69 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -35,6 +35,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* * Addresses to scan @@ -139,7 +140,7 @@ static struct i2c_driver lm83_driver = { struct lm83_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -171,11 +172,11 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp[nr] = TEMP_TO_REG(val); i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4], data->temp[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -300,7 +301,7 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) /* We can fill in the remaining client fields */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -373,7 +374,7 @@ static struct lm83_data *lm83_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm83_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { int nr; @@ -393,7 +394,7 @@ static struct lm83_data *lm83_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 7389a012754..342e9663119 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -31,6 +31,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; @@ -331,10 +332,10 @@ struct lm85_autofan { struct lm85_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; int valid; /* !=0 if following fields are valid */ unsigned long last_reading; /* In jiffies */ unsigned long last_config; /* In jiffies */ @@ -373,8 +374,8 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, int kind); static int lm85_detach_client(struct i2c_client *client); -static int lm85_read_value(struct i2c_client *client, u8 register); -static int lm85_write_value(struct i2c_client *client, u8 register, int value); +static int lm85_read_value(struct i2c_client *client, u8 reg); +static int lm85_write_value(struct i2c_client *client, u8 reg, int value); static struct lm85_data *lm85_update_device(struct device *dev); static void lm85_init_client(struct i2c_client *client); @@ -407,10 +408,10 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val); lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -499,10 +500,10 @@ static ssize_t set_pwm(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm[nr] = PWM_TO_REG(val); lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr) @@ -559,10 +560,10 @@ static ssize_t set_in_min(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = INS_TO_REG(nr, val); lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_in_max(struct device *dev, char *buf, int nr) @@ -577,10 +578,10 @@ static ssize_t set_in_max(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = INS_TO_REG(nr, val); lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define show_in_reg(offset) \ @@ -640,10 +641,10 @@ static ssize_t set_temp_min(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_max(struct device *dev, char *buf, int nr) @@ -658,10 +659,10 @@ static ssize_t set_temp_max(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define show_temp_reg(offset) \ @@ -713,12 +714,12 @@ static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) | ZONE_TO_REG(val) ; lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), data->autofan[nr].config); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr) @@ -733,11 +734,11 @@ static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->autofan[nr].min_pwm = PWM_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr), data->autofan[nr].min_pwm); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr) @@ -752,7 +753,7 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->autofan[nr].min_off = val; lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0] | data->syncpwm3 @@ -760,7 +761,7 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf, | (data->autofan[1].min_off ? 0x40 : 0) | (data->autofan[2].min_off ? 0x80 : 0) ); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr) @@ -775,13 +776,13 @@ static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->autofan[nr].freq = FREQ_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), (data->zone[nr].range << 4) | data->autofan[nr].freq ); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define pwm_auto(offset) \ @@ -857,7 +858,7 @@ static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf, int min; long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); min = TEMP_FROM_REG(data->zone[nr].limit); data->zone[nr].off_desired = TEMP_TO_REG(val); data->zone[nr].hyst = HYST_TO_REG(min - val); @@ -871,7 +872,7 @@ static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf, (data->zone[2].hyst << 4) ); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr) @@ -886,7 +887,7 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->zone[nr].limit = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr), data->zone[nr].limit); @@ -913,7 +914,7 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf, (data->zone[2].hyst << 4) ); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr) @@ -930,7 +931,7 @@ static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf, int min; long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); min = TEMP_FROM_REG(data->zone[nr].limit); data->zone[nr].max_desired = TEMP_TO_REG(val); data->zone[nr].range = RANGE_TO_REG( @@ -938,7 +939,7 @@ static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf, lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), ((data->zone[nr].range & 0x0f) << 4) | (data->autofan[nr].freq & 0x07)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr) @@ -953,11 +954,11 @@ static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->zone[nr].critical = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr), data->zone[nr].critical); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define temp_auto(offset) \ @@ -1149,7 +1150,7 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, /* Fill in the remaining client fields */ data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -1368,7 +1369,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) struct lm85_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if ( !data->valid || time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) { @@ -1571,7 +1572,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->valid = 1; - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index 6ba34c302d8..e229daf666d 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -60,6 +60,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> /* * Addresses to scan @@ -176,7 +177,7 @@ static struct i2c_driver lm87_driver = { struct lm87_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -253,11 +254,11 @@ static void set_in_min(struct device *dev, const char *buf, int nr) struct lm87_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]); lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) : LM87_REG_AIN_MIN(nr-6), data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); } static void set_in_max(struct device *dev, const char *buf, int nr) @@ -266,11 +267,11 @@ static void set_in_max(struct device *dev, const char *buf, int nr) struct lm87_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]); lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) : LM87_REG_AIN_MAX(nr-6), data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); } #define set_in(offset) \ @@ -327,10 +328,10 @@ static void set_temp_low(struct device *dev, const char *buf, int nr) struct lm87_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_low[nr] = TEMP_TO_REG(val); lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); } static void set_temp_high(struct device *dev, const char *buf, int nr) @@ -339,10 +340,10 @@ static void set_temp_high(struct device *dev, const char *buf, int nr) struct lm87_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_high[nr] = TEMP_TO_REG(val); lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); } #define set_temp(offset) \ @@ -411,11 +412,11 @@ static void set_fan_min(struct device *dev, const char *buf, int nr) struct lm87_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr])); lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); } /* Note: we save and restore the fan minimum here, because its value is @@ -431,7 +432,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, unsigned long min; u8 reg; - down(&data->update_lock); + mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], FAN_DIV_FROM_REG(data->fan_div[nr])); @@ -441,7 +442,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, case 4: data->fan_div[nr] = 2; break; case 8: data->fan_div[nr] = 3; break; default: - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } @@ -459,7 +460,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, data->fan_min[nr] = FAN_TO_REG(min, val); lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -522,10 +523,10 @@ static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const struct lm87_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->aout = AOUT_TO_REG(val); lm87_write_value(client, LM87_REG_AOUT, data->aout); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); @@ -589,7 +590,7 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) /* We can fill in the remaining client fields */ strlcpy(new_client->name, "lm87", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -744,7 +745,7 @@ static struct lm87_data *lm87_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm87_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { int i, j; @@ -813,7 +814,7 @@ static struct lm87_data *lm87_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 5679464447c..d9eeaf7585b 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -78,6 +78,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* * Addresses to scan @@ -201,7 +202,7 @@ static struct i2c_driver lm90_driver = { struct lm90_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ int kind; @@ -247,13 +248,13 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (data->kind == adt7461) data->temp8[nr] = TEMP1_TO_REG_ADT7461(val); else data->temp8[nr] = TEMP1_TO_REG(val); i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -281,7 +282,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (data->kind == adt7461) data->temp11[nr] = TEMP2_TO_REG_ADT7461(val); else @@ -290,7 +291,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, data->temp11[nr] >> 8); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], data->temp11[nr] & 0xff); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -311,11 +312,11 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, long val = simple_strtol(buf, NULL, 10); long hyst; - down(&data->update_lock); + mutex_lock(&data->update_lock); hyst = TEMP1_FROM_REG(data->temp8[3]) - val; i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, HYST_TO_REG(hyst)); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -558,7 +559,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; data->kind = kind; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -646,7 +647,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm90_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { u8 oldh, newh, l; @@ -692,7 +693,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index b0c4cb730a7..197f77226dc 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -46,6 +46,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> /* The LM92 and MAX6635 have 2 two-state pins for address selection, resulting in 4 possible addresses. */ @@ -96,7 +97,7 @@ static struct i2c_driver lm92_driver; struct lm92_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -114,7 +115,7 @@ static struct lm92_data *lm92_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm92_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { @@ -134,7 +135,7 @@ static struct lm92_data *lm92_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } @@ -158,10 +159,10 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co struct lm92_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = TEMP_TO_REG(val); \ i2c_smbus_write_word_data(client, reg, swab16(data->value)); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } set_temp(temp1_crit, LM92_REG_TEMP_CRIT); @@ -194,11 +195,11 @@ static ssize_t set_temp1_crit_hyst(struct device *dev, struct device_attribute * struct lm92_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val; i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST, swab16(TEMP_TO_REG(data->temp1_hyst))); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -348,7 +349,7 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) /* Fill in the remaining client fields */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the i2c subsystem a new client has arrived */ if ((err = i2c_attach_client(new_client))) diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 3abe330b22c..b4135b5971f 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -33,6 +33,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/err.h> +#include <linux/mutex.h> static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, @@ -104,7 +105,7 @@ static struct i2c_driver max1619_driver = { struct max1619_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -141,10 +142,10 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co struct max1619_data *data = i2c_get_clientdata(client); \ long val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->value = TEMP_TO_REG(val); \ i2c_smbus_write_byte_data(client, reg, data->value); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } @@ -262,7 +263,7 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) /* We can fill in the remaining client fields */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -330,7 +331,7 @@ static struct max1619_data *max1619_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct max1619_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { dev_dbg(&client->dev, "Updating max1619 data.\n"); @@ -353,7 +354,7 @@ static struct max1619_data *max1619_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index f161e88e3bb..ae05e483a77 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -43,6 +43,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> static u8 devid; @@ -183,8 +184,8 @@ static inline u8 PWM_TO_REG(int val, int inv) struct pc87360_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; - struct semaphore update_lock; + struct mutex lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -283,7 +284,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr, struct pc87360_data *data = i2c_get_clientdata(client); long fan_min = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[attr->index])); /* If it wouldn't fit, change clock divisor */ @@ -300,23 +301,31 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr, /* Write new divider, preserve alarm bits */ pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(attr->index), data->fan_status[attr->index] & 0xF9); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define show_and_set_fan(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan_input, NULL, offset-1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \ - show_fan_min, set_fan_min, offset-1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_fan_div, NULL, offset-1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_status, S_IRUGO, \ - show_fan_status, NULL, offset-1); -show_and_set_fan(1) -show_and_set_fan(2) -show_and_set_fan(3) +static struct sensor_device_attribute fan_input[] = { + SENSOR_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0), + SENSOR_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1), + SENSOR_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2), +}; +static struct sensor_device_attribute fan_status[] = { + SENSOR_ATTR(fan1_status, S_IRUGO, show_fan_status, NULL, 0), + SENSOR_ATTR(fan2_status, S_IRUGO, show_fan_status, NULL, 1), + SENSOR_ATTR(fan3_status, S_IRUGO, show_fan_status, NULL, 2), +}; +static struct sensor_device_attribute fan_div[] = { + SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0), + SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1), + SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2), +}; +static struct sensor_device_attribute fan_min[] = { + SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 0), + SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 1), + SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 2), +}; static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -335,21 +344,20 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, con struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm[attr->index] = PWM_TO_REG(val, FAN_CONFIG_INVERT(data->fan_conf, attr->index)); pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(attr->index), data->pwm[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define show_and_set_pwm(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \ - show_pwm, set_pwm, offset-1); -show_and_set_pwm(1) -show_and_set_pwm(2) -show_and_set_pwm(3) +static struct sensor_device_attribute pwm[] = { + SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0), + SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1), + SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2), +}; static ssize_t show_in_input(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -386,11 +394,11 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[attr->index] = IN_TO_REG(val, data->in_vref); pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MIN, data->in_min[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -401,35 +409,67 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[attr->index] = IN_TO_REG(val, data->in_vref); pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MAX, data->in_max[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define show_and_set_in(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in_input, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ - show_in_max, set_in_max, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_status, S_IRUGO, \ - show_in_status, NULL, offset); -show_and_set_in(0) -show_and_set_in(1) -show_and_set_in(2) -show_and_set_in(3) -show_and_set_in(4) -show_and_set_in(5) -show_and_set_in(6) -show_and_set_in(7) -show_and_set_in(8) -show_and_set_in(9) -show_and_set_in(10) +static struct sensor_device_attribute in_input[] = { + SENSOR_ATTR(in0_input, S_IRUGO, show_in_input, NULL, 0), + SENSOR_ATTR(in1_input, S_IRUGO, show_in_input, NULL, 1), + SENSOR_ATTR(in2_input, S_IRUGO, show_in_input, NULL, 2), + SENSOR_ATTR(in3_input, S_IRUGO, show_in_input, NULL, 3), + SENSOR_ATTR(in4_input, S_IRUGO, show_in_input, NULL, 4), + SENSOR_ATTR(in5_input, S_IRUGO, show_in_input, NULL, 5), + SENSOR_ATTR(in6_input, S_IRUGO, show_in_input, NULL, 6), + SENSOR_ATTR(in7_input, S_IRUGO, show_in_input, NULL, 7), + SENSOR_ATTR(in8_input, S_IRUGO, show_in_input, NULL, 8), + SENSOR_ATTR(in9_input, S_IRUGO, show_in_input, NULL, 9), + SENSOR_ATTR(in10_input, S_IRUGO, show_in_input, NULL, 10), +}; +static struct sensor_device_attribute in_status[] = { + SENSOR_ATTR(in0_status, S_IRUGO, show_in_status, NULL, 0), + SENSOR_ATTR(in1_status, S_IRUGO, show_in_status, NULL, 1), + SENSOR_ATTR(in2_status, S_IRUGO, show_in_status, NULL, 2), + SENSOR_ATTR(in3_status, S_IRUGO, show_in_status, NULL, 3), + SENSOR_ATTR(in4_status, S_IRUGO, show_in_status, NULL, 4), + SENSOR_ATTR(in5_status, S_IRUGO, show_in_status, NULL, 5), + SENSOR_ATTR(in6_status, S_IRUGO, show_in_status, NULL, 6), + SENSOR_ATTR(in7_status, S_IRUGO, show_in_status, NULL, 7), + SENSOR_ATTR(in8_status, S_IRUGO, show_in_status, NULL, 8), + SENSOR_ATTR(in9_status, S_IRUGO, show_in_status, NULL, 9), + SENSOR_ATTR(in10_status, S_IRUGO, show_in_status, NULL, 10), +}; +static struct sensor_device_attribute in_min[] = { + SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 0), + SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 1), + SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 2), + SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 3), + SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 4), + SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 5), + SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 6), + SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 7), + SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 8), + SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 9), + SENSOR_ATTR(in10_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 10), +}; +static struct sensor_device_attribute in_max[] = { + SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 0), + SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 1), + SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 2), + SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 3), + SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 4), + SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 5), + SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 6), + SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 7), + SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 8), + SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 9), + SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10), +}; static ssize_t show_therm_input(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -473,11 +513,11 @@ static ssize_t set_therm_min(struct device *dev, struct device_attribute *devatt struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[attr->index] = IN_TO_REG(val, data->in_vref); pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MIN, data->in_min[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_therm_max(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -488,11 +528,11 @@ static ssize_t set_therm_max(struct device *dev, struct device_attribute *devatt struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[attr->index] = IN_TO_REG(val, data->in_vref); pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MAX, data->in_max[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -503,28 +543,51 @@ static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devat struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_crit[attr->index-11] = IN_TO_REG(val, data->in_vref); pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_CRIT, data->in_crit[attr->index-11]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define show_and_set_therm(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_therm_input, NULL, 11+offset-4); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_therm_min, set_therm_min, 11+offset-4); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_therm_max, set_therm_max, 11+offset-4); \ -static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ - show_therm_crit, set_therm_crit, 11+offset-4); \ -static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ - show_therm_status, NULL, 11+offset-4); -show_and_set_therm(4) -show_and_set_therm(5) -show_and_set_therm(6) +/* the +11 term below reflects the fact that VLM units 11,12,13 are + used in the chip to measure voltage across the thermistors +*/ +static struct sensor_device_attribute therm_input[] = { + SENSOR_ATTR(temp4_input, S_IRUGO, show_therm_input, NULL, 0+11), + SENSOR_ATTR(temp5_input, S_IRUGO, show_therm_input, NULL, 1+11), + SENSOR_ATTR(temp6_input, S_IRUGO, show_therm_input, NULL, 2+11), +}; +static struct sensor_device_attribute therm_status[] = { + SENSOR_ATTR(temp4_status, S_IRUGO, show_therm_status, NULL, 0+11), + SENSOR_ATTR(temp5_status, S_IRUGO, show_therm_status, NULL, 1+11), + SENSOR_ATTR(temp6_status, S_IRUGO, show_therm_status, NULL, 2+11), +}; +static struct sensor_device_attribute therm_min[] = { + SENSOR_ATTR(temp4_min, S_IRUGO | S_IWUSR, + show_therm_min, set_therm_min, 0+11), + SENSOR_ATTR(temp5_min, S_IRUGO | S_IWUSR, + show_therm_min, set_therm_min, 1+11), + SENSOR_ATTR(temp6_min, S_IRUGO | S_IWUSR, + show_therm_min, set_therm_min, 2+11), +}; +static struct sensor_device_attribute therm_max[] = { + SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR, + show_therm_max, set_therm_max, 0+11), + SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR, + show_therm_max, set_therm_max, 1+11), + SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, + show_therm_max, set_therm_max, 2+11), +}; +static struct sensor_device_attribute therm_crit[] = { + SENSOR_ATTR(temp4_crit, S_IRUGO | S_IWUSR, + show_therm_crit, set_therm_crit, 0+11), + SENSOR_ATTR(temp5_crit, S_IRUGO | S_IWUSR, + show_therm_crit, set_therm_crit, 1+11), + SENSOR_ATTR(temp6_crit, S_IRUGO | S_IWUSR, + show_therm_crit, set_therm_crit, 2+11), +}; static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) { @@ -592,11 +655,11 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_min[attr->index] = TEMP_TO_REG(val); pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MIN, data->temp_min[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -607,11 +670,11 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[attr->index] = TEMP_TO_REG(val); pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MAX, data->temp_max[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -622,28 +685,48 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devatt struct pc87360_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_crit[attr->index] = TEMP_TO_REG(val); pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_CRIT, data->temp_crit[attr->index]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define show_and_set_temp(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp_input, NULL, offset-1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_temp_min, set_temp_min, offset-1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_temp_max, set_temp_max, offset-1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ - show_temp_crit, set_temp_crit, offset-1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ - show_temp_status, NULL, offset-1); -show_and_set_temp(1) -show_and_set_temp(2) -show_and_set_temp(3) +static struct sensor_device_attribute temp_input[] = { + SENSOR_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0), + SENSOR_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1), + SENSOR_ATTR(temp3_input, S_IRUGO, show_temp_input, NULL, 2), +}; +static struct sensor_device_attribute temp_status[] = { + SENSOR_ATTR(temp1_status, S_IRUGO, show_temp_status, NULL, 0), + SENSOR_ATTR(temp2_status, S_IRUGO, show_temp_status, NULL, 1), + SENSOR_ATTR(temp3_status, S_IRUGO, show_temp_status, NULL, 2), +}; +static struct sensor_device_attribute temp_min[] = { + SENSOR_ATTR(temp1_min, S_IRUGO | S_IWUSR, + show_temp_min, set_temp_min, 0), + SENSOR_ATTR(temp2_min, S_IRUGO | S_IWUSR, + show_temp_min, set_temp_min, 1), + SENSOR_ATTR(temp3_min, S_IRUGO | S_IWUSR, + show_temp_min, set_temp_min, 2), +}; +static struct sensor_device_attribute temp_max[] = { + SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 0), + SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 1), + SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 2), +}; +static struct sensor_device_attribute temp_crit[] = { + SENSOR_ATTR(temp1_crit, S_IRUGO | S_IWUSR, + show_temp_crit, set_temp_crit, 0), + SENSOR_ATTR(temp2_crit, S_IRUGO | S_IWUSR, + show_temp_crit, set_temp_crit, 1), + SENSOR_ATTR(temp3_crit, S_IRUGO | S_IWUSR, + show_temp_crit, set_temp_crit, 2), +}; static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *attr, char *buf) { @@ -749,22 +832,24 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses static int pc87360_detect(struct i2c_adapter *adapter) { int i; - struct i2c_client *new_client; + struct i2c_client *client; struct pc87360_data *data; int err = 0; const char *name = "pc87360"; int use_thermistors = 0; + struct device *dev; if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL))) return -ENOMEM; - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - init_MUTEX(&data->lock); - new_client->adapter = adapter; - new_client->driver = &pc87360_driver; - new_client->flags = 0; + client = &data->client; + dev = &client->dev; + i2c_set_clientdata(client, data); + client->addr = address; + mutex_init(&data->lock); + client->adapter = adapter; + client->driver = &pc87360_driver; + client->flags = 0; data->fannr = 2; data->innr = 0; @@ -792,15 +877,15 @@ static int pc87360_detect(struct i2c_adapter *adapter) break; } - strcpy(new_client->name, name); + strlcpy(client->name, name, sizeof(client->name)); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); for (i = 0; i < 3; i++) { if (((data->address[i] = extra_isa[i])) && !request_region(extra_isa[i], PC87360_EXTENT, pc87360_driver.driver.name)) { - dev_err(&new_client->dev, "Region 0x%x-0x%x already " + dev_err(&client->dev, "Region 0x%x-0x%x already " "in use!\n", extra_isa[i], extra_isa[i]+PC87360_EXTENT-1); for (i--; i >= 0; i--) @@ -814,7 +899,7 @@ static int pc87360_detect(struct i2c_adapter *adapter) if (data->fannr) data->fan_conf = confreg[0] | (confreg[1] << 8); - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto ERROR2; /* Use the correct reference voltage @@ -828,7 +913,7 @@ static int pc87360_detect(struct i2c_adapter *adapter) PC87365_REG_TEMP_CONFIG); } data->in_vref = (i&0x02) ? 3025 : 2966; - dev_dbg(&new_client->dev, "Using %s reference voltage\n", + dev_dbg(&client->dev, "Using %s reference voltage\n", (i&0x02) ? "external" : "internal"); data->vid_conf = confreg[3]; @@ -847,154 +932,64 @@ static int pc87360_detect(struct i2c_adapter *adapter) if (devid == 0xe9 && data->address[1]) /* PC87366 */ use_thermistors = confreg[2] & 0x40; - pc87360_init_client(new_client, use_thermistors); + pc87360_init_client(client, use_thermistors); } /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); + data->class_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto ERROR3; } if (data->innr) { - device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_status.dev_attr); - - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); - device_create_file(&new_client->dev, &dev_attr_alarms_in); + for (i = 0; i < 11; i++) { + device_create_file(dev, &in_input[i].dev_attr); + device_create_file(dev, &in_min[i].dev_attr); + device_create_file(dev, &in_max[i].dev_attr); + device_create_file(dev, &in_status[i].dev_attr); + } + device_create_file(dev, &dev_attr_cpu0_vid); + device_create_file(dev, &dev_attr_vrm); + device_create_file(dev, &dev_attr_alarms_in); } if (data->tempnr) { - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_status.dev_attr); - - device_create_file(&new_client->dev, &dev_attr_alarms_temp); - } - if (data->tempnr == 3) { - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_status.dev_attr); - } - if (data->innr == 14) { - device_create_file(&new_client->dev, &sensor_dev_attr_temp4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp4_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp5_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp6_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp4_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp5_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp6_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp4_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp5_status.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp6_status.dev_attr); - } - - if (data->fannr) { - if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) { - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_status.dev_attr); + for (i = 0; i < data->tempnr; i++) { + device_create_file(dev, &temp_input[i].dev_attr); + device_create_file(dev, &temp_min[i].dev_attr); + device_create_file(dev, &temp_max[i].dev_attr); + device_create_file(dev, &temp_crit[i].dev_attr); + device_create_file(dev, &temp_status[i].dev_attr); } + device_create_file(dev, &dev_attr_alarms_temp); + } - if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) { - device_create_file(&new_client->dev, - &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan2_div.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan2_status.dev_attr); + if (data->innr == 14) { + for (i = 0; i < 3; i++) { + device_create_file(dev, &therm_input[i].dev_attr); + device_create_file(dev, &therm_min[i].dev_attr); + device_create_file(dev, &therm_max[i].dev_attr); + device_create_file(dev, &therm_crit[i].dev_attr); + device_create_file(dev, &therm_status[i].dev_attr); } - - if (FAN_CONFIG_CONTROL(data->fan_conf, 0)) - device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr); - if (FAN_CONFIG_CONTROL(data->fan_conf, 1)) - device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr); } - if (data->fannr == 3) { - if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) { - device_create_file(&new_client->dev, - &sensor_dev_attr_fan3_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan3_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan3_div.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan3_status.dev_attr); - } - if (FAN_CONFIG_CONTROL(data->fan_conf, 2)) - device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr); + for (i = 0; i < data->fannr; i++) { + if (FAN_CONFIG_MONITOR(data->fan_conf, i)) { + device_create_file(dev, &fan_input[i].dev_attr); + device_create_file(dev, &fan_min[i].dev_attr); + device_create_file(dev, &fan_div[i].dev_attr); + device_create_file(dev, &fan_status[i].dev_attr); + } + if (FAN_CONFIG_CONTROL(data->fan_conf, i)) + device_create_file(dev, &pwm[i].dev_attr); } return 0; ERROR3: - i2c_detach_client(new_client); + i2c_detach_client(client); ERROR2: for (i = 0; i < 3; i++) { if (data->address[i]) { @@ -1033,11 +1028,11 @@ static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, { int res; - down(&(data->lock)); + mutex_lock(&(data->lock)); if (bank != NO_BANK) outb_p(bank, data->address[ldi] + PC87365_REG_BANK); res = inb_p(data->address[ldi] + reg); - up(&(data->lock)); + mutex_unlock(&(data->lock)); return res; } @@ -1045,11 +1040,11 @@ static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, u8 reg, u8 value) { - down(&(data->lock)); + mutex_lock(&(data->lock)); if (bank != NO_BANK) outb_p(bank, data->address[ldi] + PC87365_REG_BANK); outb_p(value, data->address[ldi] + reg); - up(&(data->lock)); + mutex_unlock(&(data->lock)); } static void pc87360_init_client(struct i2c_client *client, int use_thermistors) @@ -1071,7 +1066,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors) } nr = data->innr < 11 ? data->innr : 11; - for (i=0; i<nr; i++) { + for (i = 0; i < nr; i++) { if (init >= init_in[i]) { /* Forcibly enable voltage channel */ reg = pc87360_read_value(data, LD_IN, i, @@ -1088,14 +1083,14 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors) /* We can't blindly trust the Super-I/O space configuration bit, most BIOS won't set it properly */ - for (i=11; i<data->innr; i++) { + for (i = 11; i < data->innr; i++) { reg = pc87360_read_value(data, LD_IN, i, PC87365_REG_TEMP_STATUS); use_thermistors = use_thermistors || (reg & 0x01); } i = use_thermistors ? 2 : 0; - for (; i<data->tempnr; i++) { + for (; i < data->tempnr; i++) { if (init >= init_temp[i]) { /* Forcibly enable temperature channel */ reg = pc87360_read_value(data, LD_TEMP, i, @@ -1111,7 +1106,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors) } if (use_thermistors) { - for (i=11; i<data->innr; i++) { + for (i = 11; i < data->innr; i++) { if (init >= init_in[i]) { /* The pin may already be used by thermal diodes */ @@ -1221,7 +1216,7 @@ static struct pc87360_data *pc87360_update_device(struct device *dev) struct pc87360_data *data = i2c_get_clientdata(client); u8 i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { dev_dbg(&client->dev, "Data update\n"); @@ -1321,7 +1316,7 @@ static struct pc87360_data *pc87360_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 8be5189d9bd..6f3fda73f70 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -60,6 +60,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/jiffies.h> +#include <linux/mutex.h> #include <asm/io.h> @@ -167,9 +168,9 @@ static inline u8 DIV_TO_REG(int val) struct sis5595_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ char maxins; /* == 3 if temp enabled, otherwise == 4 */ @@ -192,8 +193,8 @@ static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */ static int sis5595_detect(struct i2c_adapter *adapter); static int sis5595_detach_client(struct i2c_client *client); -static int sis5595_read_value(struct i2c_client *client, u8 register); -static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value); +static int sis5595_read_value(struct i2c_client *client, u8 reg); +static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value); static struct sis5595_data *sis5595_update_device(struct device *dev); static void sis5595_init_client(struct i2c_client *client); @@ -231,10 +232,10 @@ static ssize_t set_in_min(struct device *dev, const char *buf, struct sis5595_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = IN_TO_REG(val); sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -245,10 +246,10 @@ static ssize_t set_in_max(struct device *dev, const char *buf, struct sis5595_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = IN_TO_REG(val); sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -310,10 +311,10 @@ static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, struct sis5595_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_over = TEMP_TO_REG(val); sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -329,10 +330,10 @@ static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, struct sis5595_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_hyst = TEMP_TO_REG(val); sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -364,10 +365,10 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, struct sis5595_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -390,7 +391,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, unsigned long val = simple_strtoul(buf, NULL, 10); int reg; - down(&data->update_lock); + mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); reg = sis5595_read_value(client, SIS5595_REG_FANDIV); @@ -403,7 +404,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, default: dev_err(&client->dev, "fan_div value %ld not " "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } @@ -419,7 +420,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -527,7 +528,7 @@ static int sis5595_detect(struct i2c_adapter *adapter) new_client = &data->client; new_client->addr = address; - init_MUTEX(&data->lock); + mutex_init(&data->lock); i2c_set_clientdata(new_client, data); new_client->adapter = adapter; new_client->driver = &sis5595_driver; @@ -548,7 +549,7 @@ static int sis5595_detect(struct i2c_adapter *adapter) strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -635,20 +636,20 @@ static int sis5595_read_value(struct i2c_client *client, u8 reg) int res; struct sis5595_data *data = i2c_get_clientdata(client); - down(&data->lock); + mutex_lock(&data->lock); outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return res; } static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value) { struct sis5595_data *data = i2c_get_clientdata(client); - down(&data->lock); + mutex_lock(&data->lock); outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET); - up(&data->lock); + mutex_unlock(&data->lock); return 0; } @@ -667,7 +668,7 @@ static struct sis5595_data *sis5595_update_device(struct device *dev) struct sis5595_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -707,7 +708,7 @@ static struct sis5595_data *sis5595_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 8663bbbe97f..b6086186d22 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -35,6 +35,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/mutex.h> #include <asm/io.h> /* Address is autodetected, there is no default value */ @@ -92,9 +93,9 @@ static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80}; struct smsc47b397_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; - struct semaphore update_lock; + struct mutex update_lock; unsigned long last_updated; /* in jiffies */ int valid; @@ -108,10 +109,10 @@ static int smsc47b397_read_value(struct i2c_client *client, u8 reg) struct smsc47b397_data *data = i2c_get_clientdata(client); int res; - down(&data->lock); + mutex_lock(&data->lock); outb(reg, client->addr); res = inb_p(client->addr + 1); - up(&data->lock); + mutex_unlock(&data->lock); return res; } @@ -121,7 +122,7 @@ static struct smsc47b397_data *smsc47b397_update_device(struct device *dev) struct smsc47b397_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { dev_dbg(&client->dev, "starting device update...\n"); @@ -144,7 +145,7 @@ static struct smsc47b397_data *smsc47b397_update_device(struct device *dev) dev_dbg(&client->dev, "... device update complete\n"); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } @@ -254,14 +255,14 @@ static int smsc47b397_detect(struct i2c_adapter *adapter) new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; - init_MUTEX(&data->lock); + mutex_init(&data->lock); new_client->adapter = adapter; new_client->driver = &smsc47b397_driver; new_client->flags = 0; strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE); - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); if ((err = i2c_attach_client(new_client))) goto error_free; diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index d1e3ec0fe4d..7732aec5459 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -34,6 +34,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/mutex.h> #include <asm/io.h> /* Address is autodetected, there is no default value */ @@ -102,9 +103,9 @@ superio_exit(void) struct smsc47m1_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; - struct semaphore update_lock; + struct mutex update_lock; unsigned long last_updated; /* In jiffies */ u8 fan[2]; /* Register value */ @@ -188,18 +189,18 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, struct smsc47m1_data *data = i2c_get_clientdata(client); long rpmdiv, val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]); if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) { - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv); smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), data->fan_preload[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -220,14 +221,14 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, if (new_div == old_div) /* No change */ return count; - down(&data->update_lock); + mutex_lock(&data->update_lock); switch (new_div) { case 1: data->fan_div[nr] = 0; break; case 2: data->fan_div[nr] = 1; break; case 4: data->fan_div[nr] = 2; break; case 8: data->fan_div[nr] = 3; break; default: - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } @@ -241,7 +242,7 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191); smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), data->fan_preload[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -257,12 +258,12 @@ static ssize_t set_pwm(struct device *dev, const char *buf, if (val < 0 || val > 255) return -EINVAL; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm[nr] &= 0x81; /* Preserve additional bits */ data->pwm[nr] |= PWM_TO_REG(val); smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), data->pwm[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -278,12 +279,12 @@ static ssize_t set_pwm_en(struct device *dev, const char *buf, if (val != 0 && val != 1) return -EINVAL; - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm[nr] &= 0xFE; /* preserve the other bits */ data->pwm[nr] |= !val; smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), data->pwm[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -408,13 +409,13 @@ static int smsc47m1_detect(struct i2c_adapter *adapter) new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; - init_MUTEX(&data->lock); + mutex_init(&data->lock); new_client->adapter = adapter; new_client->driver = &smsc47m1_driver; new_client->flags = 0; strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE); - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* If no function is properly configured, there's no point in actually registering the chip. */ @@ -512,17 +513,17 @@ static int smsc47m1_read_value(struct i2c_client *client, u8 reg) { int res; - down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + mutex_lock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); res = inb_p(client->addr + reg); - up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + mutex_unlock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); return res; } static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value) { - down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + mutex_lock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); outb_p(value, client->addr + reg); - up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + mutex_unlock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); } static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, @@ -531,7 +532,7 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct smsc47m1_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) { int i; @@ -558,7 +559,7 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, data->last_updated = jiffies; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index cb01848729b..166298f1f19 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -39,6 +39,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/mutex.h> #include <asm/io.h> @@ -296,7 +297,7 @@ static inline long TEMP_FROM_REG10(u16 val) struct via686a_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -355,11 +356,11 @@ static ssize_t set_in_min(struct device *dev, const char *buf, struct via686a_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = IN_TO_REG(val, nr); via686a_write_value(client, VIA686A_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_in_max(struct device *dev, const char *buf, @@ -368,11 +369,11 @@ static ssize_t set_in_max(struct device *dev, const char *buf, struct via686a_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = IN_TO_REG(val, nr); via686a_write_value(client, VIA686A_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define show_in_offset(offset) \ @@ -432,11 +433,11 @@ static ssize_t set_temp_over(struct device *dev, const char *buf, struct via686a_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_over[nr] = TEMP_TO_REG(val); via686a_write_value(client, VIA686A_REG_TEMP_OVER[nr], data->temp_over[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_temp_hyst(struct device *dev, const char *buf, @@ -445,11 +446,11 @@ static ssize_t set_temp_hyst(struct device *dev, const char *buf, struct via686a_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_hyst[nr] = TEMP_TO_REG(val); via686a_write_value(client, VIA686A_REG_TEMP_HYST[nr], data->temp_hyst[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } #define show_temp_offset(offset) \ @@ -508,10 +509,10 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, struct via686a_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_fan_div(struct device *dev, const char *buf, @@ -521,12 +522,12 @@ static ssize_t set_fan_div(struct device *dev, const char *buf, int val = simple_strtol(buf, NULL, 10); int old; - down(&data->update_lock); + mutex_lock(&data->update_lock); old = via686a_read_value(client, VIA686A_REG_FANDIV); data->fan_div[nr] = DIV_TO_REG(val); old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4); via686a_write_value(client, VIA686A_REG_FANDIV, old); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -639,7 +640,7 @@ static int via686a_detect(struct i2c_adapter *adapter) strlcpy(new_client->name, client_name, I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) goto exit_free; @@ -733,7 +734,7 @@ static struct via686a_data *via686a_update_device(struct device *dev) struct via686a_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -788,7 +789,7 @@ static struct via686a_data *via686a_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 271e9cb9532..686f3deb309 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -35,6 +35,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> static int force_addr; @@ -148,7 +149,7 @@ static inline u8 FAN_TO_REG(long rpm, int div) struct vt8231_data { struct i2c_client client; - struct semaphore update_lock; + struct mutex update_lock; struct class_device *class_dev; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -223,10 +224,10 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255); vt8231_write_value(client, regvoltmin[nr], data->in_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -239,10 +240,10 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255); vt8231_write_value(client, regvoltmax[nr], data->in_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -281,11 +282,11 @@ static ssize_t set_in5_min(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3, 0, 255); vt8231_write_value(client, regvoltmin[5], data->in_min[5]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -296,11 +297,11 @@ static ssize_t set_in5_max(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3, 0, 255); vt8231_write_value(client, regvoltmax[5], data->in_max[5]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -351,10 +352,10 @@ static ssize_t set_temp0_max(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255); vt8231_write_value(client, regtempmax[0], data->temp_max[0]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr, @@ -364,10 +365,10 @@ static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255); vt8231_write_value(client, regtempmin[0], data->temp_min[0]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -407,10 +408,10 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255); vt8231_write_value(client, regtempmax[nr], data->temp_max[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, @@ -422,10 +423,10 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255); vt8231_write_value(client, regtempmin[nr], data->temp_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -520,10 +521,10 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, struct vt8231_data *data = i2c_get_clientdata(client); int val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -539,7 +540,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, long min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); - down(&data->update_lock); + mutex_lock(&data->update_lock); switch (val) { case 1: data->fan_div[nr] = 0; break; case 2: data->fan_div[nr] = 1; break; @@ -548,7 +549,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, default: dev_err(&client->dev, "fan_div value %ld not supported." "Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } @@ -558,7 +559,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4); vt8231_write_value(client, VT8231_REG_FANDIV, old); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -660,7 +661,7 @@ int vt8231_detect(struct i2c_adapter *adapter) /* Fill in the remaining client fields and put into the global list */ strlcpy(client->name, "vt8231", I2C_NAME_SIZE); - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(client))) @@ -745,7 +746,7 @@ static struct vt8231_data *vt8231_update_device(struct device *dev) int i; u16 low; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -804,7 +805,7 @@ static struct vt8231_data *vt8231_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 12d79f5e490..b6bd5685fd3 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -42,7 +42,9 @@ #include <linux/i2c.h> #include <linux/i2c-isa.h> #include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> #include "lm75.h" @@ -177,9 +179,9 @@ temp1_to_reg(int temp) struct w83627ehf_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -230,7 +232,7 @@ static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg) struct w83627ehf_data *data = i2c_get_clientdata(client); int res, word_sized = is_word_sized(reg); - down(&data->lock); + mutex_lock(&data->lock); w83627ehf_set_bank(client, reg); outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); @@ -242,7 +244,7 @@ static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg) } w83627ehf_reset_bank(client, reg); - up(&data->lock); + mutex_unlock(&data->lock); return res; } @@ -252,7 +254,7 @@ static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value) struct w83627ehf_data *data = i2c_get_clientdata(client); int word_sized = is_word_sized(reg); - down(&data->lock); + mutex_lock(&data->lock); w83627ehf_set_bank(client, reg); outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); @@ -264,7 +266,7 @@ static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value) outb_p(value & 0xff, client->addr + DATA_REG_OFFSET); w83627ehf_reset_bank(client, reg); - up(&data->lock); + mutex_unlock(&data->lock); return 0; } @@ -322,7 +324,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) struct w83627ehf_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { @@ -397,7 +399,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } @@ -407,9 +409,12 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) #define show_fan_reg(reg) \ static ssize_t \ -show_##reg(struct device *dev, char *buf, int nr) \ +show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ return sprintf(buf, "%d\n", \ fan_from_reg(data->reg[nr], \ div_from_reg(data->fan_div[nr]))); \ @@ -418,23 +423,28 @@ show_fan_reg(fan); show_fan_reg(fan_min); static ssize_t -show_fan_div(struct device *dev, char *buf, int nr) +show_fan_div(struct device *dev, struct device_attribute *attr, + char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); - return sprintf(buf, "%u\n", - div_from_reg(data->fan_div[nr])); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr])); } static ssize_t -store_fan_min(struct device *dev, const char *buf, size_t count, int nr) +store_fan_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; unsigned int val = simple_strtoul(buf, NULL, 10); unsigned int reg; u8 new_div; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (!val) { /* No min limit, alarm disabled */ data->fan_min[nr] = 255; @@ -482,63 +492,46 @@ store_fan_min(struct device *dev, const char *buf, size_t count, int nr) } w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr], data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } -#define sysfs_fan_offset(offset) \ -static ssize_t \ -show_reg_fan_##offset(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_fan(dev, buf, offset-1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_reg_fan_##offset, NULL); +static struct sensor_device_attribute sda_fan_input[] = { + SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), + SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), + SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), + SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3), + SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4), +}; -#define sysfs_fan_min_offset(offset) \ -static ssize_t \ -show_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_fan_min(dev, buf, offset-1); \ -} \ -static ssize_t \ -store_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_fan_min(dev, buf, count, offset-1); \ -} \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_reg_fan##offset##_min, \ - store_reg_fan##offset##_min); +static struct sensor_device_attribute sda_fan_min[] = { + SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + store_fan_min, 0), + SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + store_fan_min, 1), + SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + store_fan_min, 2), + SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + store_fan_min, 3), + SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + store_fan_min, 4), +}; -#define sysfs_fan_div_offset(offset) \ -static ssize_t \ -show_reg_fan##offset##_div(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_reg_fan##offset##_div, NULL); - -sysfs_fan_offset(1); -sysfs_fan_min_offset(1); -sysfs_fan_div_offset(1); -sysfs_fan_offset(2); -sysfs_fan_min_offset(2); -sysfs_fan_div_offset(2); -sysfs_fan_offset(3); -sysfs_fan_min_offset(3); -sysfs_fan_div_offset(3); -sysfs_fan_offset(4); -sysfs_fan_min_offset(4); -sysfs_fan_div_offset(4); -sysfs_fan_offset(5); -sysfs_fan_min_offset(5); -sysfs_fan_div_offset(5); +static struct sensor_device_attribute sda_fan_div[] = { + SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0), + SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1), + SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2), + SENSOR_ATTR(fan4_div, S_IRUGO, show_fan_div, NULL, 3), + SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4), +}; + +static void device_create_file_fan(struct device *dev, int i) +{ + device_create_file(dev, &sda_fan_input[i].dev_attr); + device_create_file(dev, &sda_fan_div[i].dev_attr); + device_create_file(dev, &sda_fan_min[i].dev_attr); +} #define show_temp1_reg(reg) \ static ssize_t \ @@ -561,27 +554,24 @@ store_temp1_##reg(struct device *dev, struct device_attribute *attr, \ struct w83627ehf_data *data = i2c_get_clientdata(client); \ u32 val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->temp1_##reg = temp1_to_reg(val); \ w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \ data->temp1_##reg); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } store_temp1_reg(OVER, max); store_temp1_reg(HYST, max_hyst); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO| S_IWUSR, - show_temp1_max, store_temp1_max); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO| S_IWUSR, - show_temp1_max_hyst, store_temp1_max_hyst); - #define show_temp_reg(reg) \ static ssize_t \ -show_##reg (struct device *dev, char *buf, int nr) \ +show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ return sprintf(buf, "%d\n", \ LM75_TEMP_FROM_REG(data->reg[nr])); \ } @@ -591,55 +581,42 @@ show_temp_reg(temp_max_hyst); #define store_temp_reg(REG, reg) \ static ssize_t \ -store_##reg (struct device *dev, const char *buf, size_t count, int nr) \ +store_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ { \ struct i2c_client *client = to_i2c_client(dev); \ struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ u32 val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->reg[nr] = LM75_TEMP_TO_REG(val); \ w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \ data->reg[nr]); \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } store_temp_reg(OVER, temp_max); store_temp_reg(HYST, temp_max_hyst); -#define sysfs_temp_offset(offset) \ -static ssize_t \ -show_reg_temp##offset (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp(dev, buf, offset - 2); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_reg_temp##offset, NULL); - -#define sysfs_temp_reg_offset(reg, offset) \ -static ssize_t \ -show_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_##reg(dev, buf, offset - 2); \ -} \ -static ssize_t \ -store_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_temp_##reg(dev, buf, count, offset - 2); \ -} \ -static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \ - show_reg_temp##offset##_##reg, \ - store_reg_temp##offset##_##reg); - -sysfs_temp_offset(2); -sysfs_temp_reg_offset(max, 2); -sysfs_temp_reg_offset(max_hyst, 2); -sysfs_temp_offset(3); -sysfs_temp_reg_offset(max, 3); -sysfs_temp_reg_offset(max_hyst, 3); +static struct sensor_device_attribute sda_temp[] = { + SENSOR_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0), + SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0), + SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 1), + SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1_max, + store_temp1_max, 0), + SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max, + store_temp_max, 0), + SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max, + store_temp_max, 1), + SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1_max_hyst, + store_temp1_max_hyst, 0), + SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 0), + SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 1), +}; /* * Driver and client management @@ -673,6 +650,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) { struct i2c_client *client; struct w83627ehf_data *data; + struct device *dev; int i, err = 0; if (!request_region(address + REGION_OFFSET, REGION_LENGTH, @@ -689,14 +667,15 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) client = &data->client; i2c_set_clientdata(client, data); client->addr = address; - init_MUTEX(&data->lock); + mutex_init(&data->lock); client->adapter = adapter; client->driver = &w83627ehf_driver; client->flags = 0; + dev = &client->dev; strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the i2c layer a new client has arrived */ if ((err = i2c_attach_client(client))) @@ -720,42 +699,18 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) data->has_fan |= (1 << 4); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&client->dev); + data->class_dev = hwmon_device_register(dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto exit_detach; } - device_create_file(&client->dev, &dev_attr_fan1_input); - device_create_file(&client->dev, &dev_attr_fan1_min); - device_create_file(&client->dev, &dev_attr_fan1_div); - device_create_file(&client->dev, &dev_attr_fan2_input); - device_create_file(&client->dev, &dev_attr_fan2_min); - device_create_file(&client->dev, &dev_attr_fan2_div); - device_create_file(&client->dev, &dev_attr_fan3_input); - device_create_file(&client->dev, &dev_attr_fan3_min); - device_create_file(&client->dev, &dev_attr_fan3_div); - - if (data->has_fan & (1 << 3)) { - device_create_file(&client->dev, &dev_attr_fan4_input); - device_create_file(&client->dev, &dev_attr_fan4_min); - device_create_file(&client->dev, &dev_attr_fan4_div); - } - if (data->has_fan & (1 << 4)) { - device_create_file(&client->dev, &dev_attr_fan5_input); - device_create_file(&client->dev, &dev_attr_fan5_min); - device_create_file(&client->dev, &dev_attr_fan5_div); + for (i = 0; i < 5; i++) { + if (data->has_fan & (1 << i)) + device_create_file_fan(dev, i); } - - device_create_file(&client->dev, &dev_attr_temp1_input); - device_create_file(&client->dev, &dev_attr_temp1_max); - device_create_file(&client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&client->dev, &dev_attr_temp2_input); - device_create_file(&client->dev, &dev_attr_temp2_max); - device_create_file(&client->dev, &dev_attr_temp2_max_hyst); - device_create_file(&client->dev, &dev_attr_temp3_input); - device_create_file(&client->dev, &dev_attr_temp3_max); - device_create_file(&client->dev, &dev_attr_temp3_max_hyst); + for (i = 0; i < ARRAY_SIZE(sda_temp); i++) + device_create_file(dev, &sda_temp[i].dev_attr); return 0; diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 7ea441d4da6..71fb7f1af8f 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -28,6 +28,7 @@ w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC) w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC) + w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) For other winbond chips, and for i2c support in the above chips, @@ -46,6 +47,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> #include "lm75.h" @@ -62,7 +64,7 @@ MODULE_PARM_DESC(force_i2c, static unsigned short address; /* Insmod parameters */ -enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf }; +enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf, w83687thf }; static int reset; module_param(reset, bool, 0); @@ -100,6 +102,10 @@ static int VAL; /* The value to read/write */ #define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */ #define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */ +#define W83687THF_VID_EN 0x29 /* w83687thf only */ +#define W83687THF_VID_CFG 0xF0 /* w83687thf only */ +#define W83687THF_VID_DATA 0xF1 /* w83687thf only */ + static inline void superio_outb(int reg, int val) { @@ -138,6 +144,7 @@ superio_exit(void) #define W627THF_DEVID 0x82 #define W697_DEVID 0x60 #define W637_DEVID 0x70 +#define W687THF_DEVID 0x85 #define WINB_ACT_REG 0x30 #define WINB_BASE_REG 0x60 /* Constants specified below */ @@ -201,11 +208,11 @@ superio_exit(void) #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B -#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */ -#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */ -#define W83627THF_REG_PWM3 0x11 /* 637HF too */ +#define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */ +#define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */ +#define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */ -#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF too */ +#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */ static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 }; static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2, @@ -285,10 +292,10 @@ static inline u8 DIV_TO_REG(long val) struct w83627hf_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -318,16 +325,15 @@ struct w83627hf_data { Default = 3435. Other Betas unimplemented */ u8 vrm; - u8 vrm_ovt; /* Register value, 627thf & 637hf only */ + u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */ }; static int w83627hf_detect(struct i2c_adapter *adapter); static int w83627hf_detach_client(struct i2c_client *client); -static int w83627hf_read_value(struct i2c_client *client, u16 register); -static int w83627hf_write_value(struct i2c_client *client, u16 register, - u16 value); +static int w83627hf_read_value(struct i2c_client *client, u16 reg); +static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value); static struct w83627hf_data *w83627hf_update_device(struct device *dev); static void w83627hf_init_client(struct i2c_client *client); @@ -360,12 +366,12 @@ store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \ \ val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->in_##reg[nr] = IN_TO_REG(val); \ w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \ data->in_##reg[nr]); \ \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } store_in_reg(MIN, min) @@ -413,7 +419,8 @@ static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg) long in0; if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) /* use VRM9 calculation */ in0 = (long)((reg * 488 + 70000 + 50) / 100); @@ -451,10 +458,11 @@ static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *a val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) /* use VRM9 calculation */ data->in_min[0] = @@ -465,7 +473,7 @@ static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *a data->in_min[0] = IN_TO_REG(val); w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -478,10 +486,11 @@ static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *a val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) /* use VRM9 calculation */ data->in_max[0] = @@ -492,7 +501,7 @@ static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *a data->in_max[0] = IN_TO_REG(val); w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -529,13 +538,13 @@ store_fan_min(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr - 1] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1])); w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr), data->fan_min[nr - 1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -597,7 +606,7 @@ store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \ \ val = simple_strtoul(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ \ if (nr >= 2) { /* TEMP2 and TEMP3 */ \ data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \ @@ -609,7 +618,7 @@ store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \ data->temp_##reg); \ } \ \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } store_temp_reg(OVER, max); @@ -718,7 +727,7 @@ store_beep_reg(struct device *dev, const char *buf, size_t count, val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (update_mask == BEEP_MASK) { /* We are storing beep_mask */ data->beep_mask = BEEP_MASK_TO_REG(val); @@ -736,7 +745,7 @@ store_beep_reg(struct device *dev, const char *buf, size_t count, w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, val2 | data->beep_enable << 7); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -783,7 +792,7 @@ store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) u8 reg; unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); /* Save fan_min */ min = FAN_FROM_REG(data->fan_min[nr], @@ -805,7 +814,7 @@ store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -848,7 +857,7 @@ store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (data->type == w83627thf) { /* bits 0-3 are reserved in 627THF */ @@ -865,7 +874,7 @@ store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr) data->pwm[nr - 1]); } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -907,7 +916,7 @@ store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); switch (val) { case 1: /* PII/Celeron diode */ @@ -941,7 +950,7 @@ store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) break; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -980,7 +989,8 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr) if(val != W627_DEVID && val != W627THF_DEVID && val != W697_DEVID && - val != W637_DEVID) { + val != W637_DEVID && + val != W687THF_DEVID) { superio_exit(); return -ENODEV; } @@ -1034,6 +1044,8 @@ static int w83627hf_detect(struct i2c_adapter *adapter) kind = w83627thf; else if(val == W637_DEVID) kind = w83637hf; + else if (val == W687THF_DEVID) + kind = w83687thf; else { dev_info(&adapter->dev, "Unsupported chip (dev_id=0x%02X).\n", val); @@ -1057,7 +1069,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter) new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; - init_MUTEX(&data->lock); + mutex_init(&data->lock); new_client->adapter = adapter; new_client->driver = &w83627hf_driver; new_client->flags = 0; @@ -1071,13 +1083,15 @@ static int w83627hf_detect(struct i2c_adapter *adapter) client_name = "w83697hf"; } else if (kind == w83637hf) { client_name = "w83637hf"; + } else if (kind == w83687thf) { + client_name = "w83687thf"; } /* Fill in the remaining client fields and put into the global list */ strlcpy(new_client->name, client_name, I2C_NAME_SIZE); data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -1106,7 +1120,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter) device_create_file_in(new_client, 2); device_create_file_in(new_client, 3); device_create_file_in(new_client, 4); - if (kind != w83627thf && kind != w83637hf) { + if (kind == w83627hf || kind == w83697hf) { device_create_file_in(new_client, 5); device_create_file_in(new_client, 6); } @@ -1139,7 +1153,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter) device_create_file_pwm(new_client, 1); device_create_file_pwm(new_client, 2); - if (kind == w83627thf || kind == w83637hf) + if (kind == w83627thf || kind == w83637hf || kind == w83687thf) device_create_file_pwm(new_client, 3); device_create_file_sensor(new_client, 1); @@ -1187,7 +1201,7 @@ static int w83627hf_read_value(struct i2c_client *client, u16 reg) struct w83627hf_data *data = i2c_get_clientdata(client); int res, word_sized; - down(&data->lock); + mutex_lock(&data->lock); word_sized = (((reg & 0xff00) == 0x100) || ((reg & 0xff00) == 0x200)) && (((reg & 0x00ff) == 0x50) @@ -1213,7 +1227,7 @@ static int w83627hf_read_value(struct i2c_client *client, u16 reg) client->addr + W83781D_ADDR_REG_OFFSET); outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); } - up(&data->lock); + mutex_unlock(&data->lock); return res; } @@ -1247,12 +1261,39 @@ exit: return res; } +static int w83687thf_read_vid(struct i2c_client *client) +{ + int res = 0xff; + + superio_enter(); + superio_select(W83627HF_LD_HWM); + + /* Make sure these GPIO pins are enabled */ + if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) { + dev_dbg(&client->dev, "VID disabled, no VID function\n"); + goto exit; + } + + /* Make sure the pins are configured for input */ + if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) { + dev_dbg(&client->dev, "VID configured as output, " + "no VID function\n"); + goto exit; + } + + res = superio_inb(W83687THF_VID_DATA) & 0x3f; + +exit: + superio_exit(); + return res; +} + static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value) { struct w83627hf_data *data = i2c_get_clientdata(client); int word_sized; - down(&data->lock); + mutex_lock(&data->lock); word_sized = (((reg & 0xff00) == 0x100) || ((reg & 0xff00) == 0x200)) && (((reg & 0x00ff) == 0x53) @@ -1277,7 +1318,7 @@ static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value) client->addr + W83781D_ADDR_REG_OFFSET); outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); } - up(&data->lock); + mutex_unlock(&data->lock); return 0; } @@ -1324,10 +1365,13 @@ static void w83627hf_init_client(struct i2c_client *client) data->vid = (lo & 0x0f) | ((hi & 0x01) << 4); } else if (w83627thf == data->type) { data->vid = w83627thf_read_gpio5(client); + } else if (w83687thf == data->type) { + data->vid = w83687thf_read_vid(client); } /* Read VRM & OVT Config only once */ - if (w83627thf == data->type || w83637hf == data->type) { + if (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type) { data->vrm_ovt = w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG); } @@ -1387,14 +1431,14 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) struct w83627hf_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { for (i = 0; i <= 8; i++) { /* skip missing sensors */ if (((data->type == w83697hf) && (i == 1)) || - ((data->type == w83627thf || data->type == w83637hf) + ((data->type != w83627hf && data->type != w83697hf) && (i == 5 || i == 6))) continue; data->in[i] = @@ -1470,7 +1514,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 64c1f8af5bb..e4c700356c4 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -42,6 +42,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/mutex.h> #include <asm/io.h> #include "lm75.h" @@ -56,6 +57,10 @@ I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f); I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); +static int reset; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); + static int init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); @@ -226,10 +231,10 @@ DIV_TO_REG(long val, enum chips type) struct w83781d_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore lock; + struct mutex lock; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -267,9 +272,8 @@ static int w83781d_isa_attach_adapter(struct i2c_adapter *adapter); static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind); static int w83781d_detach_client(struct i2c_client *client); -static int w83781d_read_value(struct i2c_client *client, u16 register); -static int w83781d_write_value(struct i2c_client *client, u16 register, - u16 value); +static int w83781d_read_value(struct i2c_client *client, u16 reg); +static int w83781d_write_value(struct i2c_client *client, u16 reg, u16 value); static struct w83781d_data *w83781d_update_device(struct device *dev); static void w83781d_init_client(struct i2c_client *client); @@ -311,11 +315,11 @@ static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count \ val = simple_strtoul(buf, NULL, 10) / 10; \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ data->in_##reg[nr] = IN_TO_REG(val); \ w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \ \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } store_in_reg(MIN, min); @@ -381,13 +385,13 @@ store_fan_min(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->fan_min[nr - 1] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1])); w83781d_write_value(client, W83781D_REG_FAN_MIN(nr), data->fan_min[nr - 1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -446,7 +450,7 @@ static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t cou \ val = simple_strtol(buf, NULL, 10); \ \ - down(&data->update_lock); \ + mutex_lock(&data->update_lock); \ \ if (nr >= 2) { /* TEMP2 and TEMP3 */ \ data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \ @@ -458,7 +462,7 @@ static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t cou data->temp_##reg); \ } \ \ - up(&data->update_lock); \ + mutex_unlock(&data->update_lock); \ return count; \ } store_temp_reg(OVER, max); @@ -571,7 +575,7 @@ store_beep_reg(struct device *dev, const char *buf, size_t count, val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (update_mask == BEEP_MASK) { /* We are storing beep_mask */ data->beep_mask = BEEP_MASK_TO_REG(val, data->type); @@ -592,7 +596,7 @@ store_beep_reg(struct device *dev, const char *buf, size_t count, w83781d_write_value(client, W83781D_REG_BEEP_INTS2, val2 | data->beep_enable << 7); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -637,7 +641,7 @@ store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) u8 reg; unsigned long val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); /* Save fan_min */ min = FAN_FROM_REG(data->fan_min[nr], @@ -662,7 +666,7 @@ store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -709,10 +713,10 @@ store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); data->pwm[nr - 1] = PWM_TO_REG(val); w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]); - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -725,7 +729,7 @@ store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); switch (val) { case 0: @@ -742,11 +746,11 @@ store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr) break; default: - up(&data->update_lock); + mutex_unlock(&data->update_lock); return -EINVAL; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -808,7 +812,7 @@ store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); + mutex_lock(&data->update_lock); switch (val) { case 1: /* PII/Celeron diode */ @@ -841,7 +845,7 @@ store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) break; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return count; } @@ -1073,7 +1077,7 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; - init_MUTEX(&data->lock); + mutex_init(&data->lock); new_client->adapter = adapter; new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver; new_client->flags = 0; @@ -1178,7 +1182,7 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) @@ -1325,7 +1329,7 @@ w83781d_read_value(struct i2c_client *client, u16 reg) int res, word_sized, bank; struct i2c_client *cl; - down(&data->lock); + mutex_lock(&data->lock); if (i2c_is_isa_client(client)) { word_sized = (((reg & 0xff00) == 0x100) || ((reg & 0xff00) == 0x200)) @@ -1383,7 +1387,7 @@ w83781d_read_value(struct i2c_client *client, u16 reg) if (bank > 2) i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); } - up(&data->lock); + mutex_unlock(&data->lock); return res; } @@ -1394,7 +1398,7 @@ w83781d_write_value(struct i2c_client *client, u16 reg, u16 value) int word_sized, bank; struct i2c_client *cl; - down(&data->lock); + mutex_lock(&data->lock); if (i2c_is_isa_client(client)) { word_sized = (((reg & 0xff00) == 0x100) || ((reg & 0xff00) == 0x200)) @@ -1447,7 +1451,7 @@ w83781d_write_value(struct i2c_client *client, u16 reg, u16 value) if (bank > 2) i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); } - up(&data->lock); + mutex_unlock(&data->lock); return 0; } @@ -1459,8 +1463,17 @@ w83781d_init_client(struct i2c_client *client) int type = data->type; u8 tmp; - if (init && type != as99127f) { /* this resets registers we don't have + if (reset && type != as99127f) { /* this resets registers we don't have documentation for on the as99127f */ + /* Resetting the chip has been the default for a long time, + but it causes the BIOS initializations (fan clock dividers, + thermal sensor types...) to be lost, so it is now optional. + It might even go away if nobody reports it as being useful, + as I see very little reason why this would be needed at + all. */ + dev_info(&client->dev, "If reset=1 solved a problem you were " + "having, please report!\n"); + /* save these registers */ i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); p = w83781d_read_value(client, W83781D_REG_PWMCLK12); @@ -1477,6 +1490,13 @@ w83781d_init_client(struct i2c_client *client) w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0); } + /* Disable power-on abnormal beep, as advised by the datasheet. + Already done if reset=1. */ + if (init && !reset && type != as99127f) { + i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); + w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80); + } + data->vrm = vid_which_vrm(); if ((type != w83781d) && (type != as99127f)) { @@ -1533,7 +1553,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev) struct w83781d_data *data = i2c_get_clientdata(client); int i; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { @@ -1641,7 +1661,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index a2f6bb67623..6865c64d8a5 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -43,6 +43,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> +#include <linux/mutex.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; @@ -271,7 +272,7 @@ struct w83792d_data { struct class_device *class_dev; enum chips type; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -382,30 +383,40 @@ static ssize_t store_in_##reg (struct device *dev, \ store_in_reg(MIN, min); store_in_reg(MAX, max); -#define sysfs_in_reg(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, \ - NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, store_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, store_in_max, offset); - -sysfs_in_reg(0); -sysfs_in_reg(1); -sysfs_in_reg(2); -sysfs_in_reg(3); -sysfs_in_reg(4); -sysfs_in_reg(5); -sysfs_in_reg(6); -sysfs_in_reg(7); -sysfs_in_reg(8); - -#define device_create_file_in(client, offset) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_in##offset##_input.dev_attr); \ -device_create_file(&client->dev, &sensor_dev_attr_in##offset##_max.dev_attr); \ -device_create_file(&client->dev, &sensor_dev_attr_in##offset##_min.dev_attr); \ -} while (0) +static struct sensor_device_attribute sda_in_input[] = { + SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), + SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), + SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), + SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), + SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), + SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), + SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), + SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), + SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), +}; +static struct sensor_device_attribute sda_in_min[] = { + SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), + SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), + SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), + SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3), + SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4), + SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5), + SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6), + SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7), + SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8), +}; +static struct sensor_device_attribute sda_in_max[] = { + SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), + SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), + SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), + SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3), + SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4), + SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5), + SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6), + SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7), + SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8), +}; + #define show_fan_reg(reg) \ static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ @@ -486,28 +497,33 @@ store_fan_div(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_fan(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \ - offset); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, store_fan_div, offset); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, store_fan_min, offset); - -sysfs_fan(1); -sysfs_fan(2); -sysfs_fan(3); -sysfs_fan(4); -sysfs_fan(5); -sysfs_fan(6); -sysfs_fan(7); - -#define device_create_file_fan(client, offset) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_input.dev_attr); \ -device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_div.dev_attr); \ -device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_min.dev_attr); \ -} while (0) +static struct sensor_device_attribute sda_fan_input[] = { + SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1), + SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2), + SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3), + SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4), + SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5), + SENSOR_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6), + SENSOR_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7), +}; +static struct sensor_device_attribute sda_fan_min[] = { + SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 1), + SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 2), + SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 3), + SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 4), + SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 5), + SENSOR_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 6), + SENSOR_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 7), +}; +static struct sensor_device_attribute sda_fan_div[] = { + SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 1), + SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 2), + SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 3), + SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 4), + SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 5), + SENSOR_ATTR(fan6_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 6), + SENSOR_ATTR(fan7_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 7), +}; /* read/write the temperature1, includes measured value and limits */ @@ -539,21 +555,6 @@ static ssize_t store_temp1(struct device *dev, struct device_attribute *attr, return count; } - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0); -static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1, - store_temp1, 1); -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1, - store_temp1, 2); - -#define device_create_file_temp1(client) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); \ -device_create_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); \ -device_create_file(&client->dev, &sensor_dev_attr_temp1_max_hyst.dev_attr); \ -} while (0) - - /* read/write the temperature2-3, includes measured value and limits */ static ssize_t show_temp23(struct device *dev, struct device_attribute *attr, @@ -590,25 +591,23 @@ static ssize_t store_temp23(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_temp23(name,idx) \ -static SENSOR_DEVICE_ATTR_2(name##_input, S_IRUGO, show_temp23, NULL, \ - idx, 0); \ -static SENSOR_DEVICE_ATTR_2(name##_max, S_IRUGO | S_IWUSR, \ - show_temp23, store_temp23, idx, 2); \ -static SENSOR_DEVICE_ATTR_2(name##_max_hyst, S_IRUGO | S_IWUSR, \ - show_temp23, store_temp23, idx, 4); - -sysfs_temp23(temp2,0) -sysfs_temp23(temp3,1) +static struct sensor_device_attribute_2 sda_temp_input[] = { + SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0), + SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0), + SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0), +}; -#define device_create_file_temp_add(client, offset) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_input.dev_attr); \ -device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_max.dev_attr); \ -device_create_file(&client->dev, \ -&sensor_dev_attr_temp##offset##_max_hyst.dev_attr); \ -} while (0) +static struct sensor_device_attribute_2 sda_temp_max[] = { + SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 1), + SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 2), + SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 2), +}; +static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { + SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 2), + SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 4), + SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 4), +}; /* get reatime status of all sensors items: voltage, temp, fan */ static ssize_t @@ -620,10 +619,6 @@ show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); -#define device_create_file_alarms(client) \ -device_create_file(&client->dev, &dev_attr_alarms); - - static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, @@ -711,26 +706,19 @@ store_pwmenable(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_pwm(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm, store_pwm, offset); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwmenable, store_pwmenable, offset); \ - -sysfs_pwm(1); -sysfs_pwm(2); -sysfs_pwm(3); - - -#define device_create_file_pwm(client, offset) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_pwm##offset.dev_attr); \ -} while (0) - -#define device_create_file_pwmenable(client, offset) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_enable.dev_attr); \ -} while (0) +static struct sensor_device_attribute sda_pwm[] = { + SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1), + SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2), + SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3), +}; +static struct sensor_device_attribute sda_pwm_enable[] = { + SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 1), + SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 2), + SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 3), +}; static ssize_t @@ -764,18 +752,14 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_pwm_mode(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset##_mode, S_IRUGO | S_IWUSR, \ - show_pwm_mode, store_pwm_mode, offset); - -sysfs_pwm_mode(1); -sysfs_pwm_mode(2); -sysfs_pwm_mode(3); - -#define device_create_file_pwm_mode(client, offset) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_mode.dev_attr); \ -} while (0) +static struct sensor_device_attribute sda_pwm_mode[] = { + SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, + show_pwm_mode, store_pwm_mode, 1), + SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, + show_pwm_mode, store_pwm_mode, 2), + SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, + show_pwm_mode, store_pwm_mode, 3), +}; static ssize_t @@ -788,12 +772,6 @@ show_regs_chassis(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL); -#define device_create_file_chassis(client) \ -do { \ -device_create_file(&client->dev, &dev_attr_chassis); \ -} while (0) - - static ssize_t show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf) { @@ -824,13 +802,6 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR, show_chassis_clear, store_chassis_clear); -#define device_create_file_chassis_clear(client) \ -do { \ -device_create_file(&client->dev, &dev_attr_chassis_clear); \ -} while (0) - - - /* For Smart Fan I / Thermal Cruise */ static ssize_t show_thermal_cruise(struct device *dev, struct device_attribute *attr, @@ -864,20 +835,14 @@ store_thermal_cruise(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_thermal_cruise(offset) \ -static SENSOR_DEVICE_ATTR(thermal_cruise##offset, S_IRUGO | S_IWUSR, \ - show_thermal_cruise, store_thermal_cruise, offset); - -sysfs_thermal_cruise(1); -sysfs_thermal_cruise(2); -sysfs_thermal_cruise(3); - -#define device_create_file_thermal_cruise(client, offset) \ -do { \ -device_create_file(&client->dev, \ -&sensor_dev_attr_thermal_cruise##offset.dev_attr); \ -} while (0) - +static struct sensor_device_attribute sda_thermal_cruise[] = { + SENSOR_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO, + show_thermal_cruise, store_thermal_cruise, 1), + SENSOR_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO, + show_thermal_cruise, store_thermal_cruise, 2), + SENSOR_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO, + show_thermal_cruise, store_thermal_cruise, 3), +}; /* For Smart Fan I/Thermal Cruise and Smart Fan II */ static ssize_t @@ -916,19 +881,14 @@ store_tolerance(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_tolerance(offset) \ -static SENSOR_DEVICE_ATTR(tolerance##offset, S_IRUGO | S_IWUSR, \ - show_tolerance, store_tolerance, offset); - -sysfs_tolerance(1); -sysfs_tolerance(2); -sysfs_tolerance(3); - -#define device_create_file_tolerance(client, offset) \ -do { \ -device_create_file(&client->dev, &sensor_dev_attr_tolerance##offset.dev_attr); \ -} while (0) - +static struct sensor_device_attribute sda_tolerance[] = { + SENSOR_ATTR(tolerance1, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 1), + SENSOR_ATTR(tolerance2, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 2), + SENSOR_ATTR(tolerance3, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 3), +}; /* For Smart Fan II */ static ssize_t @@ -964,28 +924,34 @@ store_sf2_point(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_sf2_point(offset, index) \ -static SENSOR_DEVICE_ATTR_2(sf2_point##offset##_fan##index, S_IRUGO | S_IWUSR, \ - show_sf2_point, store_sf2_point, offset, index); - -sysfs_sf2_point(1, 1); /* Fan1 */ -sysfs_sf2_point(2, 1); /* Fan1 */ -sysfs_sf2_point(3, 1); /* Fan1 */ -sysfs_sf2_point(4, 1); /* Fan1 */ -sysfs_sf2_point(1, 2); /* Fan2 */ -sysfs_sf2_point(2, 2); /* Fan2 */ -sysfs_sf2_point(3, 2); /* Fan2 */ -sysfs_sf2_point(4, 2); /* Fan2 */ -sysfs_sf2_point(1, 3); /* Fan3 */ -sysfs_sf2_point(2, 3); /* Fan3 */ -sysfs_sf2_point(3, 3); /* Fan3 */ -sysfs_sf2_point(4, 3); /* Fan3 */ - -#define device_create_file_sf2_point(client, offset, index) \ -do { \ -device_create_file(&client->dev, \ -&sensor_dev_attr_sf2_point##offset##_fan##index.dev_attr); \ -} while (0) +static struct sensor_device_attribute_2 sda_sf2_point[] = { + SENSOR_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 1, 1), + SENSOR_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 2, 1), + SENSOR_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 3, 1), + SENSOR_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 4, 1), + + SENSOR_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 1, 2), + SENSOR_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 2, 2), + SENSOR_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 3, 2), + SENSOR_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 4, 2), + + SENSOR_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 1, 3), + SENSOR_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 2, 3), + SENSOR_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 3, 3), + SENSOR_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 4, 3), +}; static ssize_t @@ -1026,26 +992,28 @@ store_sf2_level(struct device *dev, struct device_attribute *attr, return count; } -#define sysfs_sf2_level(offset, index) \ -static SENSOR_DEVICE_ATTR_2(sf2_level##offset##_fan##index, S_IRUGO | S_IWUSR, \ - show_sf2_level, store_sf2_level, offset, index); - -sysfs_sf2_level(1, 1); /* Fan1 */ -sysfs_sf2_level(2, 1); /* Fan1 */ -sysfs_sf2_level(3, 1); /* Fan1 */ -sysfs_sf2_level(1, 2); /* Fan2 */ -sysfs_sf2_level(2, 2); /* Fan2 */ -sysfs_sf2_level(3, 2); /* Fan2 */ -sysfs_sf2_level(1, 3); /* Fan3 */ -sysfs_sf2_level(2, 3); /* Fan3 */ -sysfs_sf2_level(3, 3); /* Fan3 */ - -#define device_create_file_sf2_level(client, offset, index) \ -do { \ -device_create_file(&client->dev, \ -&sensor_dev_attr_sf2_level##offset##_fan##index.dev_attr); \ -} while (0) - +static struct sensor_device_attribute_2 sda_sf2_level[] = { + SENSOR_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 1, 1), + SENSOR_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 2, 1), + SENSOR_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 3, 1), + + SENSOR_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 1, 2), + SENSOR_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 2, 2), + SENSOR_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 3, 2), + + SENSOR_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 1, 3), + SENSOR_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 2, 3), + SENSOR_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 3, 3), +}; /* This function is called when: * w83792d_driver is inserted (when this module is loaded), for each @@ -1147,12 +1115,19 @@ ERROR_SC_0: return err; } +static void device_create_file_fan(struct device *dev, int i) +{ + device_create_file(dev, &sda_fan_input[i].dev_attr); + device_create_file(dev, &sda_fan_div[i].dev_attr); + device_create_file(dev, &sda_fan_min[i].dev_attr); +} static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind) { int i = 0, val1 = 0, val2; - struct i2c_client *new_client; + struct i2c_client *client; + struct device *dev; struct w83792d_data *data; int err = 0; const char *client_name = ""; @@ -1170,12 +1145,13 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) goto ERROR0; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &w83792d_driver; - new_client->flags = 0; + client = &data->client; + dev = &client->dev; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &w83792d_driver; + client->flags = 0; /* Now, we do the remaining detection. */ @@ -1184,13 +1160,12 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) force_*=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { - if (w83792d_read_value(new_client, W83792D_REG_CONFIG) & 0x80) { - dev_warn(&new_client->dev, "Detection failed at step " - "3\n"); + if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) { + dev_warn(dev, "Detection failed at step 3\n"); goto ERROR1; } - val1 = w83792d_read_value(new_client, W83792D_REG_BANK); - val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN); + val1 = w83792d_read_value(client, W83792D_REG_BANK); + val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); /* Check for Winbond ID if in bank 0 */ if (!(val1 & 0x07)) { /* is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || @@ -1200,34 +1175,33 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) } /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR should match */ - if (w83792d_read_value(new_client, + if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) { - dev_warn(&new_client->dev, "Detection failed " - "at step 5\n"); + dev_warn(dev, "Detection failed at step 5\n"); goto ERROR1; } } /* We have either had a force parameter, or we have already detected the Winbond. Put it now into bank 0 and Vendor ID High Byte */ - w83792d_write_value(new_client, + w83792d_write_value(client, W83792D_REG_BANK, - (w83792d_read_value(new_client, + (w83792d_read_value(client, W83792D_REG_BANK) & 0x78) | 0x80); /* Determine the chip type. */ if (kind <= 0) { /* get vendor ID */ - val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN); + val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); if (val2 != 0x5c) { /* the vendor is NOT Winbond */ goto ERROR1; } - val1 = w83792d_read_value(new_client, W83792D_REG_WCHIPID); + val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); if (val1 == 0x7a) { kind = w83792d; } else { if (kind == 0) - dev_warn(&new_client->dev, + dev_warn(dev, "w83792d: Ignoring 'force' parameter for" " unknown chip at adapter %d, address" " 0x%02x\n", i2c_adapter_id(adapter), @@ -1239,120 +1213,86 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) if (kind == w83792d) { client_name = "w83792d"; } else { - dev_err(&new_client->dev, "w83792d: Internal error: unknown" + dev_err(dev, "w83792d: Internal error: unknown" " kind (%d)?!?", kind); goto ERROR1; } /* Fill in the remaining client fields and put into the global list */ - strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + strlcpy(client->name, client_name, I2C_NAME_SIZE); data->type = kind; data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto ERROR1; if ((err = w83792d_detect_subclients(adapter, address, - kind, new_client))) + kind, client))) goto ERROR2; /* Initialize the chip */ - w83792d_init_client(new_client); + w83792d_init_client(client); /* A few vars need to be filled upon startup */ for (i = 0; i < 7; i++) { - data->fan_min[i] = w83792d_read_value(new_client, + data->fan_min[i] = w83792d_read_value(client, W83792D_REG_FAN_MIN[i]); } /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); + data->class_dev = hwmon_device_register(dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto ERROR3; } - device_create_file_in(new_client, 0); - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - device_create_file_in(new_client, 4); - device_create_file_in(new_client, 5); - device_create_file_in(new_client, 6); - device_create_file_in(new_client, 7); - device_create_file_in(new_client, 8); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); + for (i = 0; i < 9; i++) { + device_create_file(dev, &sda_in_input[i].dev_attr); + device_create_file(dev, &sda_in_max[i].dev_attr); + device_create_file(dev, &sda_in_min[i].dev_attr); + } + for (i = 0; i < 3; i++) + device_create_file_fan(dev, i); /* Read GPIO enable register to check if pins for fan 4,5 are used as GPIO */ - val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN); + val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN); if (!(val1 & 0x40)) - device_create_file_fan(new_client, 4); + device_create_file_fan(dev, 3); if (!(val1 & 0x20)) - device_create_file_fan(new_client, 5); + device_create_file_fan(dev, 4); - val1 = w83792d_read_value(new_client, W83792D_REG_PIN); + val1 = w83792d_read_value(client, W83792D_REG_PIN); if (val1 & 0x40) - device_create_file_fan(new_client, 6); + device_create_file_fan(dev, 5); if (val1 & 0x04) - device_create_file_fan(new_client, 7); - - device_create_file_temp1(new_client); /* Temp1 */ - device_create_file_temp_add(new_client, 2); /* Temp2 */ - device_create_file_temp_add(new_client, 3); /* Temp3 */ - - device_create_file_alarms(new_client); - - device_create_file_pwm(new_client, 1); - device_create_file_pwm(new_client, 2); - device_create_file_pwm(new_client, 3); - - device_create_file_pwmenable(new_client, 1); - device_create_file_pwmenable(new_client, 2); - device_create_file_pwmenable(new_client, 3); - - device_create_file_pwm_mode(new_client, 1); - device_create_file_pwm_mode(new_client, 2); - device_create_file_pwm_mode(new_client, 3); - - device_create_file_chassis(new_client); - device_create_file_chassis_clear(new_client); - - device_create_file_thermal_cruise(new_client, 1); - device_create_file_thermal_cruise(new_client, 2); - device_create_file_thermal_cruise(new_client, 3); - - device_create_file_tolerance(new_client, 1); - device_create_file_tolerance(new_client, 2); - device_create_file_tolerance(new_client, 3); - - device_create_file_sf2_point(new_client, 1, 1); /* Fan1 */ - device_create_file_sf2_point(new_client, 2, 1); /* Fan1 */ - device_create_file_sf2_point(new_client, 3, 1); /* Fan1 */ - device_create_file_sf2_point(new_client, 4, 1); /* Fan1 */ - device_create_file_sf2_point(new_client, 1, 2); /* Fan2 */ - device_create_file_sf2_point(new_client, 2, 2); /* Fan2 */ - device_create_file_sf2_point(new_client, 3, 2); /* Fan2 */ - device_create_file_sf2_point(new_client, 4, 2); /* Fan2 */ - device_create_file_sf2_point(new_client, 1, 3); /* Fan3 */ - device_create_file_sf2_point(new_client, 2, 3); /* Fan3 */ - device_create_file_sf2_point(new_client, 3, 3); /* Fan3 */ - device_create_file_sf2_point(new_client, 4, 3); /* Fan3 */ - - device_create_file_sf2_level(new_client, 1, 1); /* Fan1 */ - device_create_file_sf2_level(new_client, 2, 1); /* Fan1 */ - device_create_file_sf2_level(new_client, 3, 1); /* Fan1 */ - device_create_file_sf2_level(new_client, 1, 2); /* Fan2 */ - device_create_file_sf2_level(new_client, 2, 2); /* Fan2 */ - device_create_file_sf2_level(new_client, 3, 2); /* Fan2 */ - device_create_file_sf2_level(new_client, 1, 3); /* Fan3 */ - device_create_file_sf2_level(new_client, 2, 3); /* Fan3 */ - device_create_file_sf2_level(new_client, 3, 3); /* Fan3 */ + device_create_file_fan(dev, 6); + + for (i = 0; i < 3; i++) { + device_create_file(dev, &sda_temp_input[i].dev_attr); + device_create_file(dev, &sda_temp_max[i].dev_attr); + device_create_file(dev, &sda_temp_max_hyst[i].dev_attr); + device_create_file(dev, &sda_thermal_cruise[i].dev_attr); + device_create_file(dev, &sda_tolerance[i].dev_attr); + } + + for (i = 0; i < ARRAY_SIZE(sda_pwm); i++) { + device_create_file(dev, &sda_pwm[i].dev_attr); + device_create_file(dev, &sda_pwm_enable[i].dev_attr); + device_create_file(dev, &sda_pwm_mode[i].dev_attr); + } + + device_create_file(dev, &dev_attr_alarms); + device_create_file(dev, &dev_attr_chassis); + device_create_file(dev, &dev_attr_chassis_clear); + + for (i = 0; i < ARRAY_SIZE(sda_sf2_point); i++) + device_create_file(dev, &sda_sf2_point[i].dev_attr); + + for (i = 0; i < ARRAY_SIZE(sda_sf2_level); i++) + device_create_file(dev, &sda_sf2_level[i].dev_attr); return 0; @@ -1366,7 +1306,7 @@ ERROR3: kfree(data->lm75[1]); } ERROR2: - i2c_detach_client(new_client); + i2c_detach_client(client); ERROR1: kfree(data); ERROR0: @@ -1434,7 +1374,7 @@ static struct w83792d_data *w83792d_update_device(struct device *dev) int i, j; u8 reg_array_tmp[4], pwm_array_tmp[7], reg_tmp; - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after (jiffies - data->last_updated, (unsigned long) (HZ * 3)) @@ -1545,7 +1485,7 @@ static struct w83792d_data *w83792d_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); #ifdef DEBUG w83792d_print_debug(data, dev); diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index f66c0cfdeda..3f2bac125fb 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -39,6 +39,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> +#include <linux/mutex.h> /* How many retries on register read error */ #define MAX_RETRIES 5 @@ -107,7 +108,7 @@ static struct i2c_driver w83l785ts_driver = { struct w83l785ts_data { struct i2c_client client; struct class_device *class_dev; - struct semaphore update_lock; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -221,7 +222,7 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) /* We can fill in the remaining client fields. */ strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE); data->valid = 0; - init_MUTEX(&data->update_lock); + mutex_init(&data->update_lock); /* Default values in case the first read fails (unlikely). */ data->temp[1] = data->temp[0] = 0; @@ -299,7 +300,7 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct w83l785ts_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { dev_dbg(&client->dev, "Updating w83l785ts data.\n"); @@ -312,7 +313,7 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; } |