aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig715
-rw-r--r--drivers/i2c/busses/Makefile57
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c38
-rw-r--r--drivers/i2c/busses/i2c-ali1563.c38
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c32
-rw-r--r--drivers/i2c/busses/i2c-amd756-s4882.c4
-rw-r--r--drivers/i2c/busses/i2c-amd756.c35
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c54
-rw-r--r--drivers/i2c/busses/i2c-au1550.c130
-rw-r--r--drivers/i2c/busses/i2c-cpm.c745
-rw-r--r--drivers/i2c/busses/i2c-davinci.c89
-rw-r--r--drivers/i2c/busses/i2c-elektor.c4
-rw-r--r--drivers/i2c/busses/i2c-gpio.c2
-rw-r--r--drivers/i2c/busses/i2c-hydra.c3
-rw-r--r--drivers/i2c/busses/i2c-i801.c284
-rw-r--r--drivers/i2c/busses/i2c-i810.c260
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c206
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c2
-rw-r--r--drivers/i2c/busses/i2c-isch.c339
-rw-r--r--drivers/i2c/busses/i2c-mpc.c2
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c2
-rw-r--r--drivers/i2c/busses/i2c-nforce2-s4985.c257
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c49
-rw-r--r--drivers/i2c/busses/i2c-ocores.c44
-rw-r--r--drivers/i2c/busses/i2c-pasemi.c2
-rw-r--r--drivers/i2c/busses/i2c-pca-platform.c2
-rw-r--r--drivers/i2c/busses/i2c-piix4.c73
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c2
-rw-r--r--drivers/i2c/busses/i2c-prosavage.c325
-rw-r--r--drivers/i2c/busses/i2c-pxa.c2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c2
-rw-r--r--drivers/i2c/busses/i2c-savage4.c185
-rw-r--r--drivers/i2c/busses/i2c-sibyte.c8
-rw-r--r--drivers/i2c/busses/i2c-sis5595.c29
-rw-r--r--drivers/i2c/busses/i2c-sis630.c59
-rw-r--r--drivers/i2c/busses/i2c-sis96x.c37
-rw-r--r--drivers/i2c/busses/i2c-stub.c6
-rw-r--r--drivers/i2c/busses/i2c-taos-evm.c5
-rw-r--r--drivers/i2c/busses/i2c-via.c5
-rw-r--r--drivers/i2c/busses/i2c-viapro.c31
-rw-r--r--drivers/i2c/busses/i2c-voodoo3.c2
-rw-r--r--drivers/i2c/busses/scx200_acb.c2
42 files changed, 2352 insertions, 1816 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 48438cc5d0c..6ee997b2817 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -4,6 +4,9 @@
menu "I2C Hardware Bus support"
+comment "PC SMBus host controller drivers"
+ depends on PCI
+
config I2C_ALI1535
tristate "ALI 1535"
depends on PCI
@@ -73,6 +76,186 @@ config I2C_AMD8111
This driver can also be built as a module. If so, the module
will be called i2c-amd8111.
+config I2C_I801
+ tristate "Intel 82801 (ICH)"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the Intel
+ 801 family of mainboard I2C interfaces. Specifically, the following
+ versions of the chipset are supported:
+ 82801AA
+ 82801AB
+ 82801BA
+ 82801CA/CAM
+ 82801DB
+ 82801EB/ER (ICH5/ICH5R)
+ 6300ESB
+ ICH6
+ ICH7
+ ESB2
+ ICH8
+ ICH9
+ Tolapai
+ ICH10
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-i801.
+
+config I2C_ISCH
+ tristate "Intel SCH SMBus 1.0"
+ depends on PCI
+ help
+ Say Y here if you want to use SMBus controller on the Intel SCH
+ based systems.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-isch.
+
+config I2C_PIIX4
+ tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the Intel
+ PIIX4 family of mainboard I2C interfaces. Specifically, the following
+ versions of the chipset are supported (note that Serverworks is part
+ of Broadcom):
+ Intel PIIX4
+ Intel 440MX
+ ATI IXP200
+ ATI IXP300
+ ATI IXP400
+ ATI SB600
+ ATI SB700
+ ATI SB800
+ Serverworks OSB4
+ Serverworks CSB5
+ Serverworks CSB6
+ Serverworks HT-1000
+ SMSC Victory66
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-piix4.
+
+config I2C_NFORCE2
+ tristate "Nvidia nForce2, nForce3 and nForce4"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the Nvidia
+ nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-nforce2.
+
+config I2C_NFORCE2_S4985
+ tristate "SMBus multiplexing on the Tyan S4985"
+ depends on I2C_NFORCE2 && EXPERIMENTAL
+ help
+ Enabling this option will add specific SMBus support for the Tyan
+ S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed
+ over 4 different channels, where the various memory module EEPROMs
+ live. Saying yes here will give you access to these in addition
+ to the trunk.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-nforce2-s4985.
+
+config I2C_SIS5595
+ tristate "SiS 5595"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the
+ SiS5595 SMBus (a subset of I2C) interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sis5595.
+
+config I2C_SIS630
+ tristate "SiS 630/730"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the
+ SiS630 and SiS730 SMBus (a subset of I2C) interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sis630.
+
+config I2C_SIS96X
+ tristate "SiS 96x"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the SiS
+ 96x SMBus (a subset of I2C) interfaces. Specifically, the following
+ chipsets are supported:
+ 645/961
+ 645DX/961
+ 645DX/962
+ 648/961
+ 650/961
+ 735
+ 745
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sis96x.
+
+config I2C_VIA
+ tristate "VIA VT82C586B"
+ depends on PCI && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be included for the VIA
+ 82C586B I2C interface
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-via.
+
+config I2C_VIAPRO
+ tristate "VIA VT82C596/82C686/82xx and CX700"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the VIA
+ VT82C596 and later SMBus interface. Specifically, the following
+ chipsets are supported:
+ VT82C596A/B
+ VT82C686A/B
+ VT8231
+ VT8233/A
+ VT8235
+ VT8237R/A/S
+ VT8251
+ CX700
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-viapro.
+
+comment "Mac SMBus host controller drivers"
+ depends on PPC_CHRP || PPC_PMAC
+
+config I2C_HYDRA
+ tristate "CHRP Apple Hydra Mac I/O I2C interface"
+ depends on PCI && PPC_CHRP && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ This supports the use of the I2C interface in the Apple Hydra Mac
+ I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
+ have such a machine.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-hydra.
+
+config I2C_POWERMAC
+ tristate "Powermac I2C interface"
+ depends on PPC_PMAC
+ default y
+ help
+ This exposes the various PowerMac i2c interfaces to the linux i2c
+ layer and to userland. It is used by various drivers on the PowerMac
+ platform, and should generally be enabled.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-powermac.
+
+comment "I2C system bus drivers (mostly embedded / system-on-chip)"
+
config I2C_AT91
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
depends on ARCH_AT91 && EXPERIMENTAL && BROKEN
@@ -101,10 +284,9 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
depends on BLACKFIN
+ depends on !BF561 && !BF531 && !BF532 && !BF533
help
- This is the TWI I2C device driver for Blackfin BF522, BF525,
- BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors,
- please don't use this driver.
+ This is the I2C bus driver for Blackfin on-chip TWI interface.
This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
@@ -117,6 +299,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
help
The unit of the TWI clock is kHz.
+config I2C_CPM
+ tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
+ depends on (CPM1 || CPM2) && OF_I2C
+ help
+ This supports the use of the I2C interface on Freescale
+ processors with CPM1 or CPM2.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-cpm.
+
config I2C_DAVINCI
tristate "DaVinci I2C driver"
depends on ARCH_DAVINCI
@@ -130,17 +322,6 @@ config I2C_DAVINCI
devices such as DaVinci NIC.
For details please see http://www.ti.com/davinci
-config I2C_ELEKTOR
- tristate "Elektor ISA card"
- depends on ISA && BROKEN_ON_SMP
- select I2C_ALGOPCF
- help
- This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
- such an adapter.
-
- This support is also available as a module. If so, the module
- will be called i2c-elektor.
-
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
depends on GENERIC_GPIO
@@ -149,104 +330,6 @@ config I2C_GPIO
This is a very simple bitbanging I2C driver utilizing the
arch-neutral GPIO API to control the SCL and SDA lines.
-config I2C_HYDRA
- tristate "CHRP Apple Hydra Mac I/O I2C interface"
- depends on PCI && PPC_CHRP && EXPERIMENTAL
- select I2C_ALGOBIT
- help
- This supports the use of the I2C interface in the Apple Hydra Mac
- I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
- have such a machine.
-
- This support is also available as a module. If so, the module
- will be called i2c-hydra.
-
-config I2C_I801
- tristate "Intel 82801 (ICH)"
- depends on PCI
- help
- If you say yes to this option, support will be included for the Intel
- 801 family of mainboard I2C interfaces. Specifically, the following
- versions of the chipset are supported:
- 82801AA
- 82801AB
- 82801BA
- 82801CA/CAM
- 82801DB
- 82801EB/ER (ICH5/ICH5R)
- 6300ESB
- ICH6
- ICH7
- ESB2
- ICH8
- ICH9
- Tolapai
- ICH10
-
- This driver can also be built as a module. If so, the module
- will be called i2c-i801.
-
-config I2C_I810
- tristate "Intel 810/815 (DEPRECATED)"
- default n
- depends on PCI
- select I2C_ALGOBIT
- help
- If you say yes to this option, support will be included for the Intel
- 810/815 family of mainboard I2C interfaces. Specifically, the
- following versions of the chipset are supported:
- i810AA
- i810AB
- i810E
- i815
- i845G
-
- This driver is deprecated in favor of the i810fb and intelfb drivers.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-i810.
-
-config I2C_PXA
- tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ARCH_PXA
- help
- If you have devices in the PXA I2C bus, say yes to this option.
- This driver can also be built as a module. If so, the module
- will be called i2c-pxa.
-
-config I2C_PXA_SLAVE
- bool "Intel PXA2XX I2C Slave comms support"
- depends on I2C_PXA
- help
- Support I2C slave mode communications on the PXA I2C bus. This
- is necessary for systems where the PXA may be a target on the
- I2C bus.
-
-config I2C_PIIX4
- tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
- depends on PCI
- help
- If you say yes to this option, support will be included for the Intel
- PIIX4 family of mainboard I2C interfaces. Specifically, the following
- versions of the chipset are supported (note that Serverworks is part
- of Broadcom):
- Intel PIIX4
- Intel 440MX
- ATI IXP200
- ATI IXP300
- ATI IXP400
- ATI SB600
- ATI SB700
- ATI SB800
- Serverworks OSB4
- Serverworks CSB5
- Serverworks CSB6
- Serverworks HT-1000
- SMSC Victory66
-
- This driver can also be built as a module. If so, the module
- will be called i2c-piix4.
-
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
depends on 4xx
@@ -281,18 +364,6 @@ config I2C_IXP2000
This driver is deprecated and will be dropped soon. Use i2c-gpio
instead.
-config I2C_POWERMAC
- tristate "Powermac I2C interface"
- depends on PPC_PMAC
- default y
- help
- This exposes the various PowerMac i2c interfaces to the linux i2c
- layer and to userland. It is used by various drivers on the PowerMac
- platform, and should generally be enabled.
-
- This support is also available as a module. If so, the module
- will be called i2c-powermac.
-
config I2C_MPC
tristate "MPC107/824x/85xx/52xx/86xx"
depends on PPC32
@@ -305,15 +376,15 @@ config I2C_MPC
This driver can also be built as a module. If so, the module
will be called i2c-mpc.
-config I2C_NFORCE2
- tristate "Nvidia nForce2, nForce3 and nForce4"
- depends on PCI
+config I2C_MV64XXX
+ tristate "Marvell mv64xxx I2C Controller"
+ depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
help
- If you say yes to this option, support will be included for the Nvidia
- nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the Marvell 64xxx line of host bridges.
This driver can also be built as a module. If so, the module
- will be called i2c-nforce2.
+ will be called i2c-mv64xxx.
config I2C_OCORES
tristate "OpenCores I2C Controller"
@@ -336,76 +407,37 @@ config I2C_OMAP
Like OMAP1510/1610/1710/5912 and OMAP242x.
For details see http://www.ti.com/omap.
-config I2C_PARPORT
- tristate "Parallel port adapter"
- depends on PARPORT
- select I2C_ALGOBIT
- help
- This supports parallel port I2C adapters such as the ones made by
- Philips or Velleman, Analog Devices evaluation boards, and more.
- Basically any adapter using the parallel port as an I2C bus with
- no extra chipset is supported by this driver, or could be.
-
- This driver is a replacement for (and was inspired by) an older
- driver named i2c-philips-par. The new driver supports more devices,
- and makes it easier to add support for new devices.
-
- An adapter type parameter is now mandatory. Please read the file
- Documentation/i2c/busses/i2c-parport for details.
-
- Another driver exists, named i2c-parport-light, which doesn't depend
- on the parport driver. This is meant for embedded systems. Don't say
- Y here if you intend to say Y or M there.
-
- This support is also available as a module. If so, the module
- will be called i2c-parport.
-
-config I2C_PARPORT_LIGHT
- tristate "Parallel port adapter (light)"
- select I2C_ALGOBIT
- help
- This supports parallel port I2C adapters such as the ones made by
- Philips or Velleman, Analog Devices evaluation boards, and more.
- Basically any adapter using the parallel port as an I2C bus with
- no extra chipset is supported by this driver, or could be.
-
- This driver is a light version of i2c-parport. It doesn't depend
- on the parport driver, and uses direct I/O access instead. This
- might be preferred on embedded systems where wasting memory for
- the clean but heavy parport handling is not an option. The
- drawback is a reduced portability and the impossibility to
- daisy-chain other parallel port devices.
-
- Don't say Y here if you said Y or M to i2c-parport. Saying M to
- both is possible but both modules should not be loaded at the same
- time.
-
- This support is also available as a module. If so, the module
- will be called i2c-parport-light.
-
config I2C_PASEMI
tristate "PA Semi SMBus interface"
depends on PPC_PASEMI && PCI
help
Supports the PA Semi PWRficient on-chip SMBus interfaces.
-config I2C_PROSAVAGE
- tristate "S3/VIA (Pro)Savage (DEPRECATED)"
- default n
- depends on PCI
- select I2C_ALGOBIT
+config I2C_PNX
+ tristate "I2C bus support for Philips PNX targets"
+ depends on ARCH_PNX4008
help
- If you say yes to this option, support will be included for the
- I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
- graphics processors.
- chipsets supported:
- S3/VIA KM266/VT8375 aka ProSavage8
- S3/VIA KM133/VT8365 aka Savage4
+ This driver supports the Philips IP3204 I2C IP block master and/or
+ slave controller
- This driver is deprecated in favor of the savagefb driver.
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pnx.
- This support is also available as a module. If so, the module
- will be called i2c-prosavage.
+config I2C_PXA
+ tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && ARCH_PXA
+ help
+ If you have devices in the PXA I2C bus, say yes to this option.
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pxa.
+
+config I2C_PXA_SLAVE
+ bool "Intel PXA2XX I2C Slave comms support"
+ depends on I2C_PXA
+ help
+ Support I2C slave mode communications on the PXA I2C bus. This
+ is necessary for systems where the PXA may be a target on the
+ I2C bus.
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
@@ -414,25 +446,24 @@ config I2C_S3C2410
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
-config I2C_SAVAGE4
- tristate "S3 Savage 4 (DEPRECATED)"
- default n
- depends on PCI
- select I2C_ALGOBIT
+config I2C_SH7760
+ tristate "Renesas SH7760 I2C Controller"
+ depends on CPU_SUBTYPE_SH7760
help
- If you say yes to this option, support will be included for the
- S3 Savage 4 I2C interface.
-
- This driver is deprecated in favor of the savagefb driver.
+ This driver supports the 2 I2C interfaces on the Renesas SH7760.
This driver can also be built as a module. If so, the module
- will be called i2c-savage4.
+ will be called i2c-sh7760.
-config I2C_SIBYTE
- tristate "SiByte SMBus interface"
- depends on SIBYTE_SB1xxx_SOC
+config I2C_SH_MOBILE
+ tristate "SuperH Mobile I2C Controller"
+ depends on SUPERH
help
- Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the Renesas SH-Mobile processor.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sh_mobile.
config I2C_SIMTEC
tristate "Simtec Generic I2C interface"
@@ -446,86 +477,65 @@ config I2C_SIMTEC
This driver can also be built as a module. If so, the module
will be called i2c-simtec.
-config SCx200_I2C
- tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
- depends on SCx200_GPIO
+config I2C_VERSATILE
+ tristate "ARM Versatile/Realview I2C bus support"
+ depends on ARCH_VERSATILE || ARCH_REALVIEW
select I2C_ALGOBIT
help
- Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
-
- If you don't know what to do here, say N.
+ Say yes if you want to support the I2C serial bus on ARMs Versatile
+ range of platforms.
- This support is also available as a module. If so, the module
- will be called scx200_i2c.
+ This driver can also be built as a module. If so, the module
+ will be called i2c-versatile.
- This driver is deprecated and will be dropped soon. Use i2c-gpio
- (or scx200_acb) instead.
+comment "External I2C/SMBus adapter drivers"
-config SCx200_I2C_SCL
- int "GPIO pin used for SCL"
- depends on SCx200_I2C
- default "12"
+config I2C_PARPORT
+ tristate "Parallel port adapter"
+ depends on PARPORT
+ select I2C_ALGOBIT
help
- Enter the GPIO pin number used for the SCL signal. This value can
- also be specified with a module parameter.
+ This supports parallel port I2C adapters such as the ones made by
+ Philips or Velleman, Analog Devices evaluation boards, and more.
+ Basically any adapter using the parallel port as an I2C bus with
+ no extra chipset is supported by this driver, or could be.
-config SCx200_I2C_SDA
- int "GPIO pin used for SDA"
- depends on SCx200_I2C
- default "13"
- help
- Enter the GPIO pin number used for the SSA signal. This value can
- also be specified with a module parameter.
+ This driver is a replacement for (and was inspired by) an older
+ driver named i2c-philips-par. The new driver supports more devices,
+ and makes it easier to add support for new devices.
-config SCx200_ACB
- tristate "Geode ACCESS.bus support"
- depends on X86_32 && PCI
- help
- Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
- SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+ An adapter type parameter is now mandatory. Please read the file
+ Documentation/i2c/busses/i2c-parport for details.
- If you don't know what to do here, say N.
+ Another driver exists, named i2c-parport-light, which doesn't depend
+ on the parport driver. This is meant for embedded systems. Don't say
+ Y here if you intend to say Y or M there.
This support is also available as a module. If so, the module
- will be called scx200_acb.
-
-config I2C_SIS5595
- tristate "SiS 5595"
- depends on PCI
- help
- If you say yes to this option, support will be included for the
- SiS5595 SMBus (a subset of I2C) interface.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-sis5595.
+ will be called i2c-parport.
-config I2C_SIS630
- tristate "SiS 630/730"
- depends on PCI
+config I2C_PARPORT_LIGHT
+ tristate "Parallel port adapter (light)"
+ select I2C_ALGOBIT
help
- If you say yes to this option, support will be included for the
- SiS630 and SiS730 SMBus (a subset of I2C) interface.
+ This supports parallel port I2C adapters such as the ones made by
+ Philips or Velleman, Analog Devices evaluation boards, and more.
+ Basically any adapter using the parallel port as an I2C bus with
+ no extra chipset is supported by this driver, or could be.
- This driver can also be built as a module. If so, the module
- will be called i2c-sis630.
+ This driver is a light version of i2c-parport. It doesn't depend
+ on the parport driver, and uses direct I/O access instead. This
+ might be preferred on embedded systems where wasting memory for
+ the clean but heavy parport handling is not an option. The
+ drawback is a reduced portability and the impossibility to
+ daisy-chain other parallel port devices.
-config I2C_SIS96X
- tristate "SiS 96x"
- depends on PCI
- help
- If you say yes to this option, support will be included for the SiS
- 96x SMBus (a subset of I2C) interfaces. Specifically, the following
- chipsets are supported:
- 645/961
- 645DX/961
- 645DX/962
- 648/961
- 650/961
- 735
- 745
+ Don't say Y here if you said Y or M to i2c-parport. Saying M to
+ both is possible but both modules should not be loaded at the same
+ time.
- This driver can also be built as a module. If so, the module
- will be called i2c-sis96x.
+ This support is also available as a module. If so, the module
+ will be called i2c-parport-light.
config I2C_TAOS_EVM
tristate "TAOS evaluation module"
@@ -543,21 +553,8 @@ config I2C_TAOS_EVM
This support is also available as a module. If so, the module
will be called i2c-taos-evm.
-config I2C_STUB
- tristate "I2C/SMBus Test Stub"
- depends on EXPERIMENTAL && m
- default 'n'
- help
- This module may be useful to developers of SMBus client drivers,
- especially for certain kinds of sensor chips.
-
- If you do build this module, be sure to read the notes and warnings
- in <file:Documentation/i2c/i2c-stub>.
-
- If you don't know what to do here, definitely say N.
-
config I2C_TINY_USB
- tristate "I2C-Tiny-USB"
+ tristate "Tiny-USB adapter"
depends on USB
help
If you say yes to this option, support will be included for the
@@ -567,16 +564,21 @@ config I2C_TINY_USB
This driver can also be built as a module. If so, the module
will be called i2c-tiny-usb.
-config I2C_VERSATILE
- tristate "ARM Versatile/Realview I2C bus support"
- depends on ARCH_VERSATILE || ARCH_REALVIEW
+comment "Graphics adapter I2C/DDC channel drivers"
+ depends on PCI
+
+config I2C_VOODOO3
+ tristate "Voodoo 3"
+ depends on PCI
select I2C_ALGOBIT
help
- Say yes if you want to support the I2C serial bus on ARMs Versatile
- range of platforms.
+ If you say yes to this option, support will be included for the
+ Voodoo 3 I2C interface.
This driver can also be built as a module. If so, the module
- will be called i2c-versatile.
+ will be called i2c-voodoo3.
+
+comment "Other I2C/SMBus bus drivers"
config I2C_ACORN
tristate "Acorn IOC/IOMD I2C bus support"
@@ -588,46 +590,16 @@ config I2C_ACORN
If you don't know, say Y.
-config I2C_VIA
- tristate "VIA 82C586B"
- depends on PCI && EXPERIMENTAL
- select I2C_ALGOBIT
- help
- If you say yes to this option, support will be included for the VIA
- 82C586B I2C interface
-
- This driver can also be built as a module. If so, the module
- will be called i2c-via.
-
-config I2C_VIAPRO
- tristate "VIA VT82C596/82C686/82xx and CX700"
- depends on PCI
- help
- If you say yes to this option, support will be included for the VIA
- VT82C596 and later SMBus interface. Specifically, the following
- chipsets are supported:
- VT82C596A/B
- VT82C686A/B
- VT8231
- VT8233/A
- VT8235
- VT8237R/A/S
- VT8251
- CX700
-
- This driver can also be built as a module. If so, the module
- will be called i2c-viapro.
-
-config I2C_VOODOO3
- tristate "Voodoo 3"
- depends on PCI
- select I2C_ALGOBIT
+config I2C_ELEKTOR
+ tristate "Elektor ISA card"
+ depends on ISA && BROKEN_ON_SMP
+ select I2C_ALGOPCF
help
- If you say yes to this option, support will be included for the
- Voodoo 3 I2C interface.
+ This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
+ such an adapter.
- This driver can also be built as a module. If so, the module
- will be called i2c-voodoo3.
+ This support is also available as a module. If so, the module
+ will be called i2c-elektor.
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
@@ -657,26 +629,6 @@ config I2C_PCA_PLATFORM
This driver can also be built as a module. If so, the module
will be called i2c-pca-platform.
-config I2C_MV64XXX
- tristate "Marvell mv64xxx I2C Controller"
- depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
- help
- If you say yes to this option, support will be included for the
- built-in I2C interface on the Marvell 64xxx line of host bridges.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-mv64xxx.
-
-config I2C_PNX
- tristate "I2C bus support for Philips PNX targets"
- depends on ARCH_PNX4008
- help
- This driver supports the Philips IP3204 I2C IP block master and/or
- slave controller
-
- This driver can also be built as a module. If so, the module
- will be called i2c-pnx.
-
config I2C_PMCMSP
tristate "PMC MSP I2C TWI Controller"
depends on PMC_MSP
@@ -686,23 +638,66 @@ config I2C_PMCMSP
This driver can also be built as module. If so, the module
will be called i2c-pmcmsp.
-config I2C_SH7760
- tristate "Renesas SH7760 I2C Controller"
- depends on CPU_SUBTYPE_SH7760
+config I2C_SIBYTE
+ tristate "SiByte SMBus interface"
+ depends on SIBYTE_SB1xxx_SOC
help
- This driver supports the 2 I2C interfaces on the Renesas SH7760.
+ Supports the SiByte SOC on-chip I2C interfaces (2 channels).
- This driver can also be built as a module. If so, the module
- will be called i2c-sh7760.
+config I2C_STUB
+ tristate "I2C/SMBus Test Stub"
+ depends on EXPERIMENTAL && m
+ default 'n'
+ help
+ This module may be useful to developers of SMBus client drivers,
+ especially for certain kinds of sensor chips.
-config I2C_SH_MOBILE
- tristate "SuperH Mobile I2C Controller"
- depends on SUPERH
+ If you do build this module, be sure to read the notes and warnings
+ in <file:Documentation/i2c/i2c-stub>.
+
+ If you don't know what to do here, definitely say N.
+
+config SCx200_I2C
+ tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
+ depends on SCx200_GPIO
+ select I2C_ALGOBIT
help
- If you say yes to this option, support will be included for the
- built-in I2C interface on the Renesas SH-Mobile processor.
+ Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
- This driver can also be built as a module. If so, the module
- will be called i2c-sh_mobile.
+ If you don't know what to do here, say N.
+
+ This support is also available as a module. If so, the module
+ will be called scx200_i2c.
+
+ This driver is deprecated and will be dropped soon. Use i2c-gpio
+ (or scx200_acb) instead.
+
+config SCx200_I2C_SCL
+ int "GPIO pin used for SCL"
+ depends on SCx200_I2C
+ default "12"
+ help
+ Enter the GPIO pin number used for the SCL signal. This value can
+ also be specified with a module parameter.
+
+config SCx200_I2C_SDA
+ int "GPIO pin used for SDA"
+ depends on SCx200_I2C
+ default "13"
+ help
+ Enter the GPIO pin number used for the SSA signal. This value can
+ also be specified with a module parameter.
+
+config SCx200_ACB
+ tristate "Geode ACCESS.bus support"
+ depends on X86_32 && PCI
+ help
+ Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
+ SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+
+ If you don't know what to do here, say N.
+
+ This support is also available as a module. If so, the module
+ will be called scx200_acb.
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e8c882a5ea6..97dbfa2107f 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -2,57 +2,68 @@
# Makefile for the i2c bus drivers.
#
+# PC SMBus host controller drivers
obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o
obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o
obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
+obj-$(CONFIG_I2C_I801) += i2c-i801.o
+obj-$(CONFIG_I2C_ISCH) += i2c-isch.o
+obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
+obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
+obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
+obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
+obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
+obj-$(CONFIG_I2C_VIA) += i2c-via.o
+obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+
+# Mac SMBus host controller drivers
+obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
+obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
+
+# Embebbed system I2C/SMBus host controller drivers
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
+obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
-obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
-obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
-obj-$(CONFIG_I2C_I801) += i2c-i801.o
-obj-$(CONFIG_I2C_I810) += i2c-i810.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
-obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
-obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
-obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
-obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
-obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
-obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
-obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
-obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
-obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
-obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
-obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
-obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
-obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
-obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
-obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
+
+# External I2C/SMBus adapter drivers
+obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
+obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
-obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
-obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
-obj-$(CONFIG_I2C_VIA) += i2c-via.o
-obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+
+# Graphics adapter I2C/DDC channel drivers
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+
+# Other I2C/SMBus bus drivers
+obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
+obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
+obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
+obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
+obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
+obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
+obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index f14372ac2fc..9cead9b9458 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -1,6 +1,4 @@
/*
- i2c-ali1535.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -61,6 +59,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
@@ -159,6 +158,11 @@ static int ali1535_setup(struct pci_dev *dev)
goto exit;
}
+ retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+ ali1535_driver.name);
+ if (retval)
+ goto exit;
+
if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
ali1535_driver.name)) {
dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
@@ -259,7 +263,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
dev_err(&adap->dev,
"SMBus reset failed! (0x%02x) - controller or "
"device on bus is probably hung\n", temp);
- return -1;
+ return -EBUSY;
}
} else {
/* check and clear done bit */
@@ -281,12 +285,12 @@ static int ali1535_transaction(struct i2c_adapter *adap)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
- result = -1;
+ result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
if (temp & ALI1535_STS_FAIL) {
- result = -1;
+ result = -EIO;
dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
}
@@ -295,7 +299,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
* do a printk. This means that bus collisions go unreported.
*/
if (temp & ALI1535_STS_BUSERR) {
- result = -1;
+ result = -ENXIO;
dev_dbg(&adap->dev,
"Error: no response or bus collision ADD=%02x\n",
inb_p(SMBHSTADD));
@@ -303,13 +307,13 @@ static int ali1535_transaction(struct i2c_adapter *adap)
/* haven't ever seen this */
if (temp & ALI1535_STS_DEV) {
- result = -1;
+ result = -EIO;
dev_err(&adap->dev, "Error: device error\n");
}
/* check to see if the "command complete" indication is set */
if (!(temp & ALI1535_STS_DONE)) {
- result = -1;
+ result = -ETIMEDOUT;
dev_err(&adap->dev, "Error: command never completed\n");
}
@@ -332,7 +336,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
@@ -357,10 +361,6 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
outb_p(0xFF, SMBHSTSTS);
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- result = -1;
- goto EXIT;
case I2C_SMBUS_QUICK:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMBHSTADD);
@@ -418,13 +418,15 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
outb_p(data->block[i], SMBBLKDAT);
}
break;
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ result = -EOPNOTSUPP;
+ goto EXIT;
}
- if (ali1535_transaction(adap)) {
- /* Error in transaction */
- result = -1;
+ result = ali1535_transaction(adap);
+ if (result)
goto EXIT;
- }
if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) {
result = 0;
@@ -475,7 +477,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter ali1535_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_ALI1535,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 6b68074e518..fc3e5b02642 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -21,6 +21,7 @@
#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#define ALI1563_MAX_TIMEOUT 500
#define ALI1563_SMBBA 0x80
@@ -67,6 +68,7 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
{
u32 data;
int timeout;
+ int status = -EIO;
dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -103,13 +105,15 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
/* Issue 'kill' to host controller */
outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
data = inb_p(SMB_HST_STS);
+ status = -ETIMEDOUT;
}
/* device error - no response, ignore the autodetection case */
- if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) {
- dev_err(&a->dev, "Device error!\n");
+ if (data & HST_STS_DEVERR) {
+ if (size != HST_CNTL2_QUICK)
+ dev_err(&a->dev, "Device error!\n");
+ status = -ENXIO;
}
-
/* bus collision */
if (data & HST_STS_BUSERR) {
dev_err(&a->dev, "Bus collision!\n");
@@ -122,13 +126,14 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
outb_p(0x0,SMB_HST_CNTL2);
}
- return -1;
+ return status;
}
static int ali1563_block_start(struct i2c_adapter * a)
{
u32 data;
int timeout;
+ int status = -EIO;
dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -164,13 +169,20 @@ static int ali1563_block_start(struct i2c_adapter * a)
if (timeout && !(data & HST_STS_BAD))
return 0;
+
+ if (timeout == 0)
+ status = -ETIMEDOUT;
+
+ if (data & HST_STS_DEVERR)
+ status = -ENXIO;
+
dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
- timeout ? "Timeout " : "",
+ timeout ? "" : "Timeout ",
data & HST_STS_FAIL ? "Transaction Failed " : "",
data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
data & HST_STS_DEVERR ? "Device Error " : "",
!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
- return -1;
+ return status;
}
static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw)
@@ -235,10 +247,6 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
/* Map the size to what the chip understands */
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_err(&a->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- error = -EINVAL;
- break;
case I2C_SMBUS_QUICK:
size = HST_CNTL2_QUICK;
break;
@@ -254,6 +262,10 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
case I2C_SMBUS_BLOCK_DATA:
size = HST_CNTL2_BLOCK;
break;
+ default:
+ dev_warn(&a->dev, "Unsupported transaction %d\n", size);
+ error = -EOPNOTSUPP;
+ goto Done;
}
outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
@@ -345,6 +357,10 @@ static int __devinit ali1563_setup(struct pci_dev * dev)
}
}
+ if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+ ali1563_pci_driver.name))
+ goto Err;
+
if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
ali1563_pci_driver.name)) {
dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
@@ -371,7 +387,7 @@ static const struct i2c_algorithm ali1563_algorithm = {
static struct i2c_adapter ali1563_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_ALI1563,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &ali1563_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 93bf87d7096..234fdde7d40 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -1,6 +1,4 @@
/*
- ali15x3.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1999 Frodo Looijaard <frodol@dds.nl> and
Philip Edelbrock <phil@netroedge.com> and
Mark D. Studebaker <mdsxyz123@yahoo.com>
@@ -68,6 +66,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* ALI15X3 SMBus address offsets */
@@ -166,6 +165,10 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
if(force_addr)
ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
+ if (acpi_check_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+ ali15x3_driver.name))
+ return -EBUSY;
+
if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
ali15x3_driver.name)) {
dev_err(&ALI15X3_dev->dev,
@@ -282,7 +285,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - "
"controller or device on bus is probably hung\n",
temp);
- return -1;
+ return -EBUSY;
}
} else {
/* check and clear done bit */
@@ -304,12 +307,12 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
- result = -1;
+ result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
if (temp & ALI15X3_STS_TERM) {
- result = -1;
+ result = -EIO;
dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
}
@@ -320,7 +323,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
This means that bus collisions go unreported.
*/
if (temp & ALI15X3_STS_COLL) {
- result = -1;
+ result = -ENXIO;
dev_dbg(&adap->dev,
"Error: no response or bus collision ADD=%02x\n",
inb_p(SMBHSTADD));
@@ -328,7 +331,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
/* haven't ever seen this */
if (temp & ALI15X3_STS_DEV) {
- result = -1;
+ result = -EIO;
dev_err(&adap->dev, "Error: device error\n");
}
dev_dbg(&adap->dev, "Transaction (post): STS=%02x, CNT=%02x, CMD=%02x, "
@@ -338,7 +341,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
@@ -362,9 +365,6 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
}
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
case I2C_SMBUS_QUICK:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMBHSTADD);
@@ -417,12 +417,16 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
}
size = ALI15X3_BLOCK_DATA;
break;
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
}
outb_p(size, SMBHSTCNT); /* output command */
- if (ali15x3_transaction(adap)) /* Error in transaction */
- return -1;
+ temp = ali15x3_transaction(adap);
+ if (temp)
+ return temp;
if ((read_write == I2C_SMBUS_WRITE) || (size == ALI15X3_QUICK))
return 0;
@@ -470,7 +474,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter ali15x3_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_ALI15X3,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index c38a0a11220..2f150e33c74 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -58,7 +58,7 @@ static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr,
/* We exclude the multiplexed addresses */
if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
|| addr == 0x18)
- return -1;
+ return -ENXIO;
mutex_lock(&amd756_lock);
@@ -86,7 +86,7 @@ static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr,
/* We exclude the non-multiplexed addresses */
if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
- return -1;
+ return -ENXIO;
mutex_lock(&amd756_lock);
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 43508d61eb7..1ea39254dac 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -1,7 +1,4 @@
/*
- amd756.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
-
Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>
Shamelessly ripped from i2c-piix4.c:
@@ -45,6 +42,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* AMD756 SMBus address offsets */
@@ -151,17 +149,17 @@ static int amd756_transaction(struct i2c_adapter *adap)
}
if (temp & GS_PRERR_STS) {
- result = -1;
+ result = -ENXIO;
dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
}
if (temp & GS_COL_STS) {
- result = -1;
+ result = -EIO;
dev_warn(&adap->dev, "SMBus collision!\n");
}
if (temp & GS_TO_STS) {
- result = -1;
+ result = -ETIMEDOUT;
dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
}
@@ -189,22 +187,18 @@ static int amd756_transaction(struct i2c_adapter *adap)
outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
msleep(100);
outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
- return -1;
+ return -EIO;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
{
int i, len;
+ int status;
- /** TODO: Should I supporte the 10-bit transfers? */
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- /* TODO: Well... It is supported, I'm just not sure what to do here... */
- return -1;
case I2C_SMBUS_QUICK:
outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMB_HOST_ADDRESS);
@@ -251,13 +245,17 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
}
size = AMD756_BLOCK_DATA;
break;
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
}
/* How about enabling interrupts... */
outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
- if (amd756_transaction(adap)) /* Error in transaction */
- return -1;
+ status = amd756_transaction(adap);
+ if (status)
+ return status;
if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
return 0;
@@ -301,7 +299,7 @@ static const struct i2c_algorithm smbus_algorithm = {
struct i2c_adapter amd756_smbus = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_AMD756,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
@@ -368,6 +366,11 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
amd756_ioport += SMB_ADDR_OFFSET;
}
+ error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
+ amd756_driver.name);
+ if (error)
+ return error;
+
if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
amd756_ioport);
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 5d1a27ef250..3972208876b 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/acpi.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
@@ -77,7 +78,7 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus)
if (!timeout) {
dev_warn(&smbus->dev->dev,
"Timeout while waiting for IBF to clear\n");
- return -1;
+ return -ETIMEDOUT;
}
return 0;
@@ -93,7 +94,7 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
if (!timeout) {
dev_warn(&smbus->dev->dev,
"Timeout while waiting for OBF to set\n");
- return -1;
+ return -ETIMEDOUT;
}
return 0;
@@ -102,16 +103,21 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
unsigned char *data)
{
- if (amd_ec_wait_write(smbus))
- return -1;
+ int status;
+
+ status = amd_ec_wait_write(smbus);
+ if (status)
+ return status;
outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD);
- if (amd_ec_wait_write(smbus))
- return -1;
+ status = amd_ec_wait_write(smbus);
+ if (status)
+ return status;
outb(address, smbus->base + AMD_EC_DATA);
- if (amd_ec_wait_read(smbus))
- return -1;
+ status = amd_ec_wait_read(smbus);
+ if (status)
+ return status;
*data = inb(smbus->base + AMD_EC_DATA);
return 0;
@@ -120,16 +126,21 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address,
unsigned char data)
{
- if (amd_ec_wait_write(smbus))
- return -1;
+ int status;
+
+ status = amd_ec_wait_write(smbus);
+ if (status)
+ return status;
outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD);
- if (amd_ec_wait_write(smbus))
- return -1;
+ status = amd_ec_wait_write(smbus);
+ if (status)
+ return status;
outb(address, smbus->base + AMD_EC_DATA);
- if (amd_ec_wait_write(smbus))
- return -1;
+ status = amd_ec_wait_write(smbus);
+ if (status)
+ return status;
outb(data, smbus->base + AMD_EC_DATA);
return 0;
@@ -267,12 +278,17 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
default:
dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
- return -1;
+ return -EOPNOTSUPP;
}
amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1);
amd_ec_write(smbus, AMD_SMB_PRTCL, protocol);
+ /* FIXME this discards status from ec_read(); so temp[0] will
+ * hold stack garbage ... the rest of this routine will act
+ * nonsensically. Ignored ec_write() status might explain
+ * some such failures...
+ */
amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
if (~temp[0] & AMD_SMB_STS_DONE) {
@@ -286,7 +302,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
}
if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS))
- return -1;
+ return -EIO;
if (read_write == I2C_SMBUS_WRITE)
return 0;
@@ -359,6 +375,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
+ error = acpi_check_resource_conflict(&dev->resource[0]);
+ if (error)
+ goto out_kfree;
+
if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
error = -EBUSY;
goto out_kfree;
@@ -368,7 +388,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"SMBus2 AMD8111 adapter at %04x", smbus->base);
smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
- smbus->adapter.class = I2C_CLASS_HWMON;
+ smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index cae9dc89d88..66a04c2c660 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -269,9 +269,13 @@ static int
au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
{
struct i2c_au1550_data *adap = i2c_adap->algo_data;
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)adap->psc_base;
struct i2c_msg *p;
int i, err = 0;
+ sp->psc_ctrl = PSC_CTRL_ENABLE;
+ au_sync();
+
for (i = 0; !err && i < num; i++) {
p = &msgs[i];
err = do_address(adap, p->addr, p->flags & I2C_M_RD,
@@ -288,6 +292,10 @@ au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
*/
if (err == 0)
err = num;
+
+ sp->psc_ctrl = PSC_CTRL_SUSPEND;
+ au_sync();
+
return err;
}
@@ -302,6 +310,61 @@ static const struct i2c_algorithm au1550_algo = {
.functionality = au1550_func,
};
+static void i2c_au1550_setup(struct i2c_au1550_data *priv)
+{
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+ u32 stat;
+
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+ sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
+ sp->psc_smbcfg = 0;
+ au_sync();
+ sp->psc_ctrl = PSC_CTRL_ENABLE;
+ au_sync();
+ do {
+ stat = sp->psc_smbstat;
+ au_sync();
+ } while ((stat & PSC_SMBSTAT_SR) == 0);
+
+ sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
+ PSC_SMBCFG_DD_DISABLE);
+
+ /* Divide by 8 to get a 6.25 MHz clock. The later protocol
+ * timings are based on this clock.
+ */
+ sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
+ sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
+ au_sync();
+
+ /* Set the protocol timer values. See Table 71 in the
+ * Au1550 Data Book for standard timing values.
+ */
+ sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
+ PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
+ PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
+ PSC_SMBTMR_SET_CH(15);
+ au_sync();
+
+ sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
+ do {
+ stat = sp->psc_smbstat;
+ au_sync();
+ } while ((stat & PSC_SMBSTAT_SR) == 0);
+
+ sp->psc_ctrl = PSC_CTRL_SUSPEND;
+ au_sync();
+}
+
+static void i2c_au1550_disable(struct i2c_au1550_data *priv)
+{
+ volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+
+ sp->psc_smbcfg = 0;
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+}
+
/*
* registering functions to load algorithms at runtime
* Prior to calling us, the 50MHz clock frequency and routing
@@ -311,9 +374,7 @@ static int __devinit
i2c_au1550_probe(struct platform_device *pdev)
{
struct i2c_au1550_data *priv;
- volatile psc_smb_t *sp;
struct resource *r;
- u32 stat;
int ret;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -348,43 +409,7 @@ i2c_au1550_probe(struct platform_device *pdev)
/* Now, set up the PSC for SMBus PIO mode.
*/
- sp = (volatile psc_smb_t *)priv->psc_base;
- sp->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
- sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
- sp->psc_smbcfg = 0;
- au_sync();
- sp->psc_ctrl = PSC_CTRL_ENABLE;
- au_sync();
- do {
- stat = sp->psc_smbstat;
- au_sync();
- } while ((stat & PSC_SMBSTAT_SR) == 0);
-
- sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
- PSC_SMBCFG_DD_DISABLE);
-
- /* Divide by 8 to get a 6.25 MHz clock. The later protocol
- * timings are based on this clock.
- */
- sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
- sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
- au_sync();
-
- /* Set the protocol timer values. See Table 71 in the
- * Au1550 Data Book for standard timing values.
- */
- sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
- PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
- PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
- PSC_SMBTMR_SET_CH(15);
- au_sync();
-
- sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
- do {
- stat = sp->psc_smbstat;
- au_sync();
- } while ((stat & PSC_SMBSTAT_DR) == 0);
+ i2c_au1550_setup(priv);
ret = i2c_add_numbered_adapter(&priv->adap);
if (ret == 0) {
@@ -392,10 +417,7 @@ i2c_au1550_probe(struct platform_device *pdev)
return 0;
}
- /* disable the PSC */
- sp->psc_smbcfg = 0;
- sp->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
+ i2c_au1550_disable(priv);
release_resource(priv->ioarea);
kfree(priv->ioarea);
@@ -409,27 +431,24 @@ static int __devexit
i2c_au1550_remove(struct platform_device *pdev)
{
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
- volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
platform_set_drvdata(pdev, NULL);
i2c_del_adapter(&priv->adap);
- sp->psc_smbcfg = 0;
- sp->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
+ i2c_au1550_disable(priv);
release_resource(priv->ioarea);
kfree(priv->ioarea);
kfree(priv);
return 0;
}
+#ifdef CONFIG_PM
static int
i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
{
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
- volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
- sp->psc_ctrl = PSC_CTRL_SUSPEND;
- au_sync();
+ i2c_au1550_disable(priv);
+
return 0;
}
@@ -437,14 +456,15 @@ static int
i2c_au1550_resume(struct platform_device *pdev)
{
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
- volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
- sp->psc_ctrl = PSC_CTRL_ENABLE;
- au_sync();
- while (!(sp->psc_smbstat & PSC_SMBSTAT_SR))
- au_sync();
+ i2c_au1550_setup(priv);
+
return 0;
}
+#else
+#define i2c_au1550_suspend NULL
+#define i2c_au1550_resume NULL
+#endif
static struct platform_driver au1xpsc_smbus_driver = {
.driver = {
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
new file mode 100644
index 00000000000..8164de1f4d7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -0,0 +1,745 @@
+/*
+ * Freescale CPM1/CPM2 I2C interface.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
+ *
+ * moved into proper i2c interface;
+ * Brad Parker (brad@heeltoe.com)
+ *
+ * Parts from dbox2_i2c.c (cvs.tuxbox.org)
+ * (C) 2000-2001 Felix Domke (tmbinc@gmx.net), Gillem (htoa@gmx.net)
+ *
+ * (C) 2007 Montavista Software, Inc.
+ * Vitaly Bordug <vitb@kernel.crashing.org>
+ *
+ * Converted to of_platform_device. Renamed to i2c-cpm.c.
+ * (C) 2007,2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/stddef.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_i2c.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/cpm.h>
+
+/* Try to define this if you have an older CPU (earlier than rev D4) */
+/* However, better use a GPIO based bitbang driver in this case :/ */
+#undef I2C_CHIP_ERRATA
+
+#define CPM_MAX_READ 513
+#define CPM_MAXBD 4
+
+#define I2C_EB (0x10) /* Big endian mode */
+#define I2C_EB_CPM2 (0x30) /* Big endian mode, memory snoop */
+
+#define DPRAM_BASE ((u8 __iomem __force *)cpm_muram_addr(0))
+
+/* I2C parameter RAM. */
+struct i2c_ram {
+ ushort rbase; /* Rx Buffer descriptor base address */
+ ushort tbase; /* Tx Buffer descriptor base address */
+ u_char rfcr; /* Rx function code */
+ u_char tfcr; /* Tx function code */
+ ushort mrblr; /* Max receive buffer length */
+ uint rstate; /* Internal */
+ uint rdp; /* Internal */
+ ushort rbptr; /* Rx Buffer descriptor pointer */
+ ushort rbc; /* Internal */
+ uint rxtmp; /* Internal */
+ uint tstate; /* Internal */
+ uint tdp; /* Internal */
+ ushort tbptr; /* Tx Buffer descriptor pointer */
+ ushort tbc; /* Internal */
+ uint txtmp; /* Internal */
+ char res1[4]; /* Reserved */
+ ushort rpbase; /* Relocation pointer */
+ char res2[2]; /* Reserved */
+};
+
+#define I2COM_START 0x80
+#define I2COM_MASTER 0x01
+#define I2CER_TXE 0x10
+#define I2CER_BUSY 0x04
+#define I2CER_TXB 0x02
+#define I2CER_RXB 0x01
+#define I2MOD_EN 0x01
+
+/* I2C Registers */
+struct i2c_reg {
+ u8 i2mod;
+ u8 res1[3];
+ u8 i2add;
+ u8 res2[3];
+ u8 i2brg;
+ u8 res3[3];
+ u8 i2com;
+ u8 res4[3];
+ u8 i2cer;
+ u8 res5[3];
+ u8 i2cmr;
+};
+
+struct cpm_i2c {
+ char *base;
+ struct of_device *ofdev;
+ struct i2c_adapter adap;
+ uint dp_addr;
+ int version; /* CPM1=1, CPM2=2 */
+ int irq;
+ int cp_command;
+ int freq;
+ struct i2c_reg __iomem *i2c_reg;
+ struct i2c_ram __iomem *i2c_ram;
+ u16 i2c_addr;
+ wait_queue_head_t i2c_wait;
+ cbd_t __iomem *tbase;
+ cbd_t __iomem *rbase;
+ u_char *txbuf[CPM_MAXBD];
+ u_char *rxbuf[CPM_MAXBD];
+ u32 txdma[CPM_MAXBD];
+ u32 rxdma[CPM_MAXBD];
+};
+
+static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id)
+{
+ struct cpm_i2c *cpm;
+ struct i2c_reg __iomem *i2c_reg;
+ struct i2c_adapter *adap = dev_id;
+ int i;
+
+ cpm = i2c_get_adapdata(dev_id);
+ i2c_reg = cpm->i2c_reg;
+
+ /* Clear interrupt. */
+ i = in_8(&i2c_reg->i2cer);
+ out_8(&i2c_reg->i2cer, i);
+
+ dev_dbg(&adap->dev, "Interrupt: %x\n", i);
+
+ wake_up_interruptible(&cpm->i2c_wait);
+
+ return i ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void cpm_reset_i2c_params(struct cpm_i2c *cpm)
+{
+ struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
+
+ /* Set up the I2C parameters in the parameter ram. */
+ out_be16(&i2c_ram->tbase, (u8 __iomem *)cpm->tbase - DPRAM_BASE);
+ out_be16(&i2c_ram->rbase, (u8 __iomem *)cpm->rbase - DPRAM_BASE);
+
+ if (cpm->version == 1) {
+ out_8(&i2c_ram->tfcr, I2C_EB);
+ out_8(&i2c_ram->rfcr, I2C_EB);
+ } else {
+ out_8(&i2c_ram->tfcr, I2C_EB_CPM2);
+ out_8(&i2c_ram->rfcr, I2C_EB_CPM2);
+ }
+
+ out_be16(&i2c_ram->mrblr, CPM_MAX_READ);
+
+ out_be32(&i2c_ram->rstate, 0);
+ out_be32(&i2c_ram->rdp, 0);
+ out_be16(&i2c_ram->rbptr, 0);
+ out_be16(&i2c_ram->rbc, 0);
+ out_be32(&i2c_ram->rxtmp, 0);
+ out_be32(&i2c_ram->tstate, 0);
+ out_be32(&i2c_ram->tdp, 0);
+ out_be16(&i2c_ram->tbptr, 0);
+ out_be16(&i2c_ram->tbc, 0);
+ out_be32(&i2c_ram->txtmp, 0);
+}
+
+static void cpm_i2c_force_close(struct i2c_adapter *adap)
+{
+ struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+ struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
+
+ dev_dbg(&adap->dev, "cpm_i2c_force_close()\n");
+
+ cpm_command(cpm->cp_command, CPM_CR_CLOSE_RX_BD);
+
+ out_8(&i2c_reg->i2cmr, 0x00); /* Disable all interrupts */
+ out_8(&i2c_reg->i2cer, 0xff);
+}
+
+static void cpm_i2c_parse_message(struct i2c_adapter *adap,
+ struct i2c_msg *pmsg, int num, int tx, int rx)
+{
+ cbd_t __iomem *tbdf;
+ cbd_t __iomem *rbdf;
+ u_char addr;
+ u_char *tb;
+ u_char *rb;
+ struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+
+ tbdf = cpm->tbase + tx;
+ rbdf = cpm->rbase + rx;
+
+ addr = pmsg->addr << 1;
+ if (pmsg->flags & I2C_M_RD)
+ addr |= 1;
+
+ tb = cpm->txbuf[tx];
+ rb = cpm->rxbuf[rx];
+
+ /* Align read buffer */
+ rb = (u_char *) (((ulong) rb + 1) & ~1);
+
+ tb[0] = addr; /* Device address byte w/rw flag */
+
+ out_be16(&tbdf->cbd_datlen, pmsg->len + 1);
+ out_be16(&tbdf->cbd_sc, 0);
+
+ if (!(pmsg->flags & I2C_M_NOSTART))
+ setbits16(&tbdf->cbd_sc, BD_I2C_START);
+
+ if (tx + 1 == num)
+ setbits16(&tbdf->cbd_sc, BD_SC_LAST | BD_SC_WRAP);
+
+ if (pmsg->flags & I2C_M_RD) {
+ /*
+ * To read, we need an empty buffer of the proper length.
+ * All that is used is the first byte for address, the remainder
+ * is just used for timing (and doesn't really have to exist).
+ */
+
+ dev_dbg(&adap->dev, "cpm_i2c_read(abyte=0x%x)\n", addr);
+
+ out_be16(&rbdf->cbd_datlen, 0);
+ out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);
+
+ if (rx + 1 == CPM_MAXBD)
+ setbits16(&rbdf->cbd_sc, BD_SC_WRAP);
+
+ eieio();
+ setbits16(&tbdf->cbd_sc, BD_SC_READY);
+ } else {
+ dev_dbg(&adap->dev, "cpm_i2c_write(abyte=0x%x)\n", addr);
+
+ memcpy(tb+1, pmsg->buf, pmsg->len);
+
+ eieio();
+ setbits16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_INTRPT);
+ }
+}
+
+static int cpm_i2c_check_message(struct i2c_adapter *adap,
+ struct i2c_msg *pmsg, int tx, int rx)
+{
+ cbd_t __iomem *tbdf;
+ cbd_t __iomem *rbdf;
+ u_char *tb;
+ u_char *rb;
+ struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+
+ tbdf = cpm->tbase + tx;
+ rbdf = cpm->rbase + rx;
+
+ tb = cpm->txbuf[tx];
+ rb = cpm->rxbuf[rx];
+
+ /* Align read buffer */
+ rb = (u_char *) (((uint) rb + 1) & ~1);
+
+ eieio();
+ if (pmsg->flags & I2C_M_RD) {
+ dev_dbg(&adap->dev, "tx sc 0x%04x, rx sc 0x%04x\n",
+ in_be16(&tbdf->cbd_sc), in_be16(&rbdf->cbd_sc));
+
+ if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
+ dev_dbg(&adap->dev, "I2C read; No ack\n");
+ return -ENXIO;
+ }
+ if (in_be16(&rbdf->cbd_sc) & BD_SC_EMPTY) {
+ dev_err(&adap->dev,
+ "I2C read; complete but rbuf empty\n");
+ return -EREMOTEIO;
+ }
+ if (in_be16(&rbdf->cbd_sc) & BD_SC_OV) {
+ dev_err(&adap->dev, "I2C read; Overrun\n");
+ return -EREMOTEIO;
+ }
+ memcpy(pmsg->buf, rb, pmsg->len);
+ } else {
+ dev_dbg(&adap->dev, "tx sc %d 0x%04x\n", tx,
+ in_be16(&tbdf->cbd_sc));
+
+ if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
+ dev_dbg(&adap->dev, "I2C write; No ack\n");
+ return -ENXIO;
+ }
+ if (in_be16(&tbdf->cbd_sc) & BD_SC_UN) {
+ dev_err(&adap->dev, "I2C write; Underrun\n");
+ return -EIO;
+ }
+ if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {
+ dev_err(&adap->dev, "I2C write; Collision\n");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+ struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
+ struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
+ struct i2c_msg *pmsg;
+ int ret, i;
+ int tptr;
+ int rptr;
+ cbd_t __iomem *tbdf;
+ cbd_t __iomem *rbdf;
+
+ if (num > CPM_MAXBD)
+ return -EINVAL;
+
+ /* Check if we have any oversized READ requests */
+ for (i = 0; i < num; i++) {
+ pmsg = &msgs[i];
+ if (pmsg->len >= CPM_MAX_READ)
+ return -EINVAL;
+ }
+
+ /* Reset to use first buffer */
+ out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase));
+ out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase));
+
+ tbdf = cpm->tbase;
+ rbdf = cpm->rbase;
+
+ tptr = 0;
+ rptr = 0;
+
+ while (tptr < num) {
+ pmsg = &msgs[tptr];
+ dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr);
+
+ cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr);
+ if (pmsg->flags & I2C_M_RD)
+ rptr++;
+ tptr++;
+ }
+ /* Start transfer now */
+ /* Enable RX/TX/Error interupts */
+ out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB);
+ out_8(&i2c_reg->i2cer, 0xff); /* Clear interrupt status */
+ /* Chip bug, set enable here */
+ setbits8(&i2c_reg->i2mod, I2MOD_EN); /* Enable */
+ /* Begin transmission */
+ setbits8(&i2c_reg->i2com, I2COM_START);
+
+ tptr = 0;
+ rptr = 0;
+
+ while (tptr < num) {
+ /* Check for outstanding messages */
+ dev_dbg(&adap->dev, "test ready.\n");
+ pmsg = &msgs[tptr];
+ if (pmsg->flags & I2C_M_RD)
+ ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+ !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
+ 1 * HZ);
+ else
+ ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+ !(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY),
+ 1 * HZ);
+ if (ret == 0) {
+ ret = -EREMOTEIO;
+ dev_err(&adap->dev, "I2C transfer: timeout\n");
+ goto out_err;
+ }
+ if (ret > 0) {
+ dev_dbg(&adap->dev, "ready.\n");
+ ret = cpm_i2c_check_message(adap, pmsg, tptr, rptr);
+ tptr++;
+ if (pmsg->flags & I2C_M_RD)
+ rptr++;
+ if (ret)
+ goto out_err;
+ }
+ }
+#ifdef I2C_CHIP_ERRATA
+ /*
+ * Chip errata, clear enable. This is not needed on rev D4 CPUs.
+ * Disabling I2C too early may cause too short stop condition
+ */
+ udelay(4);
+ clrbits8(&i2c_reg->i2mod, I2MOD_EN);
+#endif
+ return (num);
+
+out_err:
+ cpm_i2c_force_close(adap);
+#ifdef I2C_CHIP_ERRATA
+ /*
+ * Chip errata, clear enable. This is not needed on rev D4 CPUs.
+ */
+ clrbits8(&i2c_reg->i2mod, I2MOD_EN);
+#endif
+ return ret;
+}
+
+static u32 cpm_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+/* -----exported algorithm data: ------------------------------------- */
+
+static const struct i2c_algorithm cpm_i2c_algo = {
+ .master_xfer = cpm_i2c_xfer,
+ .functionality = cpm_i2c_func,
+};
+
+static const struct i2c_adapter cpm_ops = {
+ .owner = THIS_MODULE,
+ .name = "i2c-cpm",
+ .algo = &cpm_i2c_algo,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+};
+
+static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
+{
+ struct of_device *ofdev = cpm->ofdev;
+ const u32 *data;
+ int len, ret, i;
+ void __iomem *i2c_base;
+ cbd_t __iomem *tbdf;
+ cbd_t __iomem *rbdf;
+ unsigned char brg;
+
+ dev_dbg(&cpm->ofdev->dev, "cpm_i2c_setup()\n");
+
+ init_waitqueue_head(&cpm->i2c_wait);
+
+ cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL);
+ if (cpm->irq == NO_IRQ)
+ return -EINVAL;
+
+ /* Install interrupt handler. */
+ ret = request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c",
+ &cpm->adap);
+ if (ret)
+ return ret;
+
+ /* I2C parameter RAM */
+ i2c_base = of_iomap(ofdev->node, 1);
+ if (i2c_base == NULL) {
+ ret = -EINVAL;
+ goto out_irq;
+ }
+
+ if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) {
+
+ /* Check for and use a microcode relocation patch. */
+ cpm->i2c_ram = i2c_base;
+ cpm->i2c_addr = in_be16(&cpm->i2c_ram->rpbase);
+
+ /*
+ * Maybe should use cpm_muram_alloc instead of hardcoding
+ * this in micropatch.c
+ */
+ if (cpm->i2c_addr) {
+ cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
+ iounmap(i2c_base);
+ }
+
+ cpm->version = 1;
+
+ } else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) {
+ cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64);
+ cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
+ out_be16(i2c_base, cpm->i2c_addr);
+ iounmap(i2c_base);
+
+ cpm->version = 2;
+
+ } else {
+ iounmap(i2c_base);
+ ret = -EINVAL;
+ goto out_irq;
+ }
+
+ /* I2C control/status registers */
+ cpm->i2c_reg = of_iomap(ofdev->node, 0);
+ if (cpm->i2c_reg == NULL) {
+ ret = -EINVAL;
+ goto out_ram;
+ }
+
+ data = of_get_property(ofdev->node, "fsl,cpm-command", &len);
+ if (!data || len != 4) {
+ ret = -EINVAL;
+ goto out_reg;
+ }
+ cpm->cp_command = *data;
+
+ data = of_get_property(ofdev->node, "linux,i2c-class", &len);
+ if (data && len == 4)
+ cpm->adap.class = *data;
+
+ data = of_get_property(ofdev->node, "clock-frequency", &len);
+ if (data && len == 4)
+ cpm->freq = *data;
+ else
+ cpm->freq = 60000; /* use 60kHz i2c clock by default */
+
+ /*
+ * Allocate space for CPM_MAXBD transmit and receive buffer
+ * descriptors in the DP ram.
+ */
+ cpm->dp_addr = cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8);
+ if (!cpm->dp_addr) {
+ ret = -ENOMEM;
+ goto out_reg;
+ }
+
+ cpm->tbase = cpm_muram_addr(cpm->dp_addr);
+ cpm->rbase = cpm_muram_addr(cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD);
+
+ /* Allocate TX and RX buffers */
+
+ tbdf = cpm->tbase;
+ rbdf = cpm->rbase;
+
+ for (i = 0; i < CPM_MAXBD; i++) {
+ cpm->rxbuf[i] = dma_alloc_coherent(
+ NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+ if (!cpm->rxbuf[i]) {
+ ret = -ENOMEM;
+ goto out_muram;
+ }
+ out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
+
+ cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
+ NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+ if (!cpm->txbuf[i]) {
+ ret = -ENOMEM;
+ goto out_muram;
+ }
+ out_be32(&tbdf[i].cbd_bufaddr, cpm->txdma[i]);
+ }
+
+ /* Initialize Tx/Rx parameters. */
+
+ cpm_reset_i2c_params(cpm);
+
+ dev_dbg(&cpm->ofdev->dev, "i2c_ram 0x%p, i2c_addr 0x%04x, freq %d\n",
+ cpm->i2c_ram, cpm->i2c_addr, cpm->freq);
+ dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n",
+ (u8 __iomem *)cpm->tbase - DPRAM_BASE,
+ (u8 __iomem *)cpm->rbase - DPRAM_BASE);
+
+ cpm_command(cpm->cp_command, CPM_CR_INIT_TRX);
+
+ /*
+ * Select an invalid address. Just make sure we don't use loopback mode
+ */
+ out_8(&cpm->i2c_reg->i2add, 0x7f << 1);
+
+ /*
+ * PDIV is set to 00 in i2mod, so brgclk/32 is used as input to the
+ * i2c baud rate generator. This is divided by 2 x (DIV + 3) to get
+ * the actual i2c bus frequency.
+ */
+ brg = get_brgfreq() / (32 * 2 * cpm->freq) - 3;
+ out_8(&cpm->i2c_reg->i2brg, brg);
+
+ out_8(&cpm->i2c_reg->i2mod, 0x00);
+ out_8(&cpm->i2c_reg->i2com, I2COM_MASTER); /* Master mode */
+
+ /* Disable interrupts. */
+ out_8(&cpm->i2c_reg->i2cmr, 0);
+ out_8(&cpm->i2c_reg->i2cer, 0xff);
+
+ return 0;
+
+out_muram:
+ for (i = 0; i < CPM_MAXBD; i++) {
+ if (cpm->rxbuf[i])
+ dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ cpm->rxbuf[i], cpm->rxdma[i]);
+ if (cpm->txbuf[i])
+ dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ cpm->txbuf[i], cpm->txdma[i]);
+ }
+ cpm_muram_free(cpm->dp_addr);
+out_reg:
+ iounmap(cpm->i2c_reg);
+out_ram:
+ if ((cpm->version == 1) && (!cpm->i2c_addr))
+ iounmap(cpm->i2c_ram);
+ if (cpm->version == 2)
+ cpm_muram_free(cpm->i2c_addr);
+out_irq:
+ free_irq(cpm->irq, &cpm->adap);
+ return ret;
+}
+
+static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
+{
+ int i;
+
+ /* Shut down I2C. */
+ clrbits8(&cpm->i2c_reg->i2mod, I2MOD_EN);
+
+ /* Disable interrupts */
+ out_8(&cpm->i2c_reg->i2cmr, 0);
+ out_8(&cpm->i2c_reg->i2cer, 0xff);
+
+ free_irq(cpm->irq, &cpm->adap);
+
+ /* Free all memory */
+ for (i = 0; i < CPM_MAXBD; i++) {
+ dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ cpm->rxbuf[i], cpm->rxdma[i]);
+ dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ cpm->txbuf[i], cpm->txdma[i]);
+ }
+
+ cpm_muram_free(cpm->dp_addr);
+ iounmap(cpm->i2c_reg);
+
+ if ((cpm->version == 1) && (!cpm->i2c_addr))
+ iounmap(cpm->i2c_ram);
+ if (cpm->version == 2)
+ cpm_muram_free(cpm->i2c_addr);
+}
+
+static int __devinit cpm_i2c_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ int result, len;
+ struct cpm_i2c *cpm;
+ const u32 *data;
+
+ cpm = kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL);
+ if (!cpm)
+ return -ENOMEM;
+
+ cpm->ofdev = ofdev;
+
+ dev_set_drvdata(&ofdev->dev, cpm);
+
+ cpm->adap = cpm_ops;
+ i2c_set_adapdata(&cpm->adap, cpm);
+ cpm->adap.dev.parent = &ofdev->dev;
+
+ result = cpm_i2c_setup(cpm);
+ if (result) {
+ dev_err(&ofdev->dev, "Unable to init hardware\n");
+ goto out_free;
+ }
+
+ /* register new adapter to i2c module... */
+
+ data = of_get_property(ofdev->node, "linux,i2c-index", &len);
+ if (data && len == 4) {
+ cpm->adap.nr = *data;
+ result = i2c_add_numbered_adapter(&cpm->adap);
+ } else
+ result = i2c_add_adapter(&cpm->adap);
+
+ if (result < 0) {
+ dev_err(&ofdev->dev, "Unable to register with I2C\n");
+ goto out_shut;
+ }
+
+ dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
+ cpm->adap.name);
+
+ /*
+ * register OF I2C devices
+ */
+ of_register_i2c_devices(&cpm->adap, ofdev->node);
+
+ return 0;
+out_shut:
+ cpm_i2c_shutdown(cpm);
+out_free:
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(cpm);
+
+ return result;
+}
+
+static int __devexit cpm_i2c_remove(struct of_device *ofdev)
+{
+ struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
+
+ i2c_del_adapter(&cpm->adap);
+
+ cpm_i2c_shutdown(cpm);
+
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(cpm);
+
+ return 0;
+}
+
+static const struct of_device_id cpm_i2c_match[] = {
+ {
+ .compatible = "fsl,cpm1-i2c",
+ },
+ {
+ .compatible = "fsl,cpm2-i2c",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, cpm_i2c_match);
+
+static struct of_platform_driver cpm_i2c_driver = {
+ .match_table = cpm_i2c_match,
+ .probe = cpm_i2c_probe,
+ .remove = __devexit_p(cpm_i2c_remove),
+ .driver = {
+ .name = "fsl-i2c-cpm",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init cpm_i2c_init(void)
+{
+ return of_register_platform_driver(&cpm_i2c_driver);
+}
+
+static void __exit cpm_i2c_exit(void)
+{
+ of_unregister_platform_driver(&cpm_i2c_driver);
+}
+
+module_init(cpm_i2c_init);
+module_exit(cpm_i2c_exit);
+
+MODULE_AUTHOR("Jochen Friedrich <jochen@scram.de>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 7ecbfc429b1..af3846eda98 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -85,6 +85,7 @@
#define DAVINCI_I2C_MDR_MST (1 << 10)
#define DAVINCI_I2C_MDR_TRX (1 << 9)
#define DAVINCI_I2C_MDR_XA (1 << 8)
+#define DAVINCI_I2C_MDR_RM (1 << 7)
#define DAVINCI_I2C_MDR_IRS (1 << 5)
#define DAVINCI_I2C_IMR_AAS (1 << 6)
@@ -112,6 +113,7 @@ struct davinci_i2c_dev {
u8 *buf;
size_t buf_len;
int irq;
+ u8 terminate;
struct i2c_adapter adapter;
};
@@ -142,6 +144,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
u16 psc;
u32 clk;
+ u32 d;
u32 clkh;
u32 clkl;
u32 input_clock = clk_get_rate(dev->clk);
@@ -171,23 +174,29 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
* if PSC > 1 , d = 5
*/
- psc = 26; /* To get 1MHz clock */
+ /* get minimum of 7 MHz clock, but max of 12 MHz */
+ psc = (input_clock / 7000000) - 1;
+ if ((input_clock / (psc + 1)) > 12000000)
+ psc++; /* better to run under spec than over */
+ d = (psc >= 2) ? 5 : 7 - psc;
- clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - 10;
- clkh = (50 * clk) / 100;
+ clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - (d << 1);
+ clkh = clk >> 1;
clkl = clk - clkh;
davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
- dev_dbg(dev->dev, "CLK = %d\n", clk);
+ dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
dev_dbg(dev->dev, "PSC = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
dev_dbg(dev->dev, "CLKL = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
dev_dbg(dev->dev, "CLKH = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
+ dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n",
+ pdata->bus_freq, pdata->bus_delay);
/* Take the I2C module out of reset: */
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
@@ -233,7 +242,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
u32 flag;
- u32 stat;
u16 w;
int r;
@@ -254,12 +262,9 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
- init_completion(&dev->cmd_complete);
+ INIT_COMPLETION(dev->cmd_complete);
dev->cmd_err = 0;
- /* Clear any pending interrupts by reading the IVR */
- stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG);
-
/* Take I2C out of reset, configure it as master and set the
* start bit */
flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT;
@@ -280,20 +285,34 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1);
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
+ dev->terminate = 0;
/* write the data into mode register */
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
DAVINCI_I2C_TIMEOUT);
- dev->buf_len = 0;
- if (r < 0)
- return r;
-
if (r == 0) {
dev_err(dev->dev, "controller timed out\n");
i2c_davinci_init(dev);
+ dev->buf_len = 0;
return -ETIMEDOUT;
}
+ if (dev->buf_len) {
+ /* This should be 0 if all bytes were transferred
+ * or dev->cmd_err denotes an error.
+ * A signal may have aborted the transfer.
+ */
+ if (r >= 0) {
+ dev_err(dev->dev, "abnormal termination buf_len=%i\n",
+ dev->buf_len);
+ r = -EREMOTEIO;
+ }
+ dev->terminate = 1;
+ wmb();
+ dev->buf_len = 0;
+ }
+ if (r < 0)
+ return r;
/* no error */
if (likely(!dev->cmd_err))
@@ -338,12 +357,11 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
for (i = 0; i < num; i++) {
ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+ dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
+ ret);
if (ret < 0)
return ret;
}
-
- dev_dbg(dev->dev, "%s:%d ret: %d\n", __func__, __LINE__, ret);
-
return num;
}
@@ -352,6 +370,27 @@ static u32 i2c_davinci_func(struct i2c_adapter *adap)
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
}
+static void terminate_read(struct davinci_i2c_dev *dev)
+{
+ u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_NACK;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+ /* Throw away data */
+ davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG);
+ if (!dev->terminate)
+ dev_err(dev->dev, "RDR IRQ while no data requested\n");
+}
+static void terminate_write(struct davinci_i2c_dev *dev)
+{
+ u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+ if (!dev->terminate)
+ dev_err(dev->dev, "TDR IRQ while no data to send\n");
+}
+
/*
* Interrupt service routine. This gets called whenever an I2C interrupt
* occurs.
@@ -372,12 +411,15 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
switch (stat) {
case DAVINCI_I2C_IVR_AL:
+ /* Arbitration lost, must retry */
dev->cmd_err |= DAVINCI_I2C_STR_AL;
+ dev->buf_len = 0;
complete(&dev->cmd_complete);
break;
case DAVINCI_I2C_IVR_NACK:
dev->cmd_err |= DAVINCI_I2C_STR_NACK;
+ dev->buf_len = 0;
complete(&dev->cmd_complete);
break;
@@ -399,9 +441,10 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
davinci_i2c_write_reg(dev,
DAVINCI_I2C_STR_REG,
DAVINCI_I2C_IMR_RRDY);
- } else
- dev_err(dev->dev, "RDR IRQ while no "
- "data requested\n");
+ } else {
+ /* signal can terminate transfer */
+ terminate_read(dev);
+ }
break;
case DAVINCI_I2C_IVR_XRDY:
@@ -418,9 +461,10 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
davinci_i2c_write_reg(dev,
DAVINCI_I2C_IMR_REG,
w);
- } else
- dev_err(dev->dev, "TDR IRQ while no data to "
- "send\n");
+ } else {
+ /* signal can terminate transfer */
+ terminate_write(dev);
+ }
break;
case DAVINCI_I2C_IVR_SCD:
@@ -475,6 +519,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
goto err_release_region;
}
+ init_completion(&dev->cmd_complete);
dev->dev = get_device(&pdev->dev);
dev->irq = irq->start;
platform_set_drvdata(pdev, dev);
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index b7a9977b025..7f38c01fb3a 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -196,13 +196,11 @@ static struct i2c_algo_pcf_data pcf_isa_data = {
.getown = pcf_isa_getown,
.getclock = pcf_isa_getclock,
.waitforpin = pcf_isa_waitforpin,
- .udelay = 10,
- .timeout = 100,
};
static struct i2c_adapter pcf_isa_ops = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.id = I2C_HW_P_ELEK,
.algo_data = &pcf_isa_data,
.name = "i2c-elektor",
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 7c1b762aa68..79b455a1f09 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -140,7 +140,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev)
adap->owner = THIS_MODULE;
snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
adap->algo_data = bit_data;
- adap->class = I2C_CLASS_HWMON;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->dev.parent = &pdev->dev;
/*
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index f9972f9651e..1098f21ace1 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -1,7 +1,4 @@
/*
- i2c-hydra.c - Part of lm_sensors, Linux kernel modules
- for hardware monitoring
-
i2c Support for the Apple `Hydra' Mac I/O
Copyright (c) 1999-2004 Geert Uytterhoeven <geert@linux-m68k.org>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index b0f771fe432..dc7ea32b69a 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1,10 +1,8 @@
/*
- i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
- Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -64,6 +62,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* I801 SMBus address offsets */
@@ -121,6 +120,10 @@
#define SMBHSTSTS_INTR 0x02
#define SMBHSTSTS_HOST_BUSY 0x01
+#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
+ SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
+ SMBHSTSTS_INTR)
+
static unsigned long i801_smba;
static unsigned char i801_original_hstcfg;
static struct pci_driver i801_driver;
@@ -132,105 +135,137 @@ static struct pci_dev *I801_dev;
#define FEATURE_I2C_BLOCK_READ (1 << 3)
static unsigned int i801_features;
-static int i801_transaction(int xact)
+/* Make sure the SMBus host is ready to start transmitting.
+ Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(void)
{
- int temp;
- int result = 0;
- int timeout = 0;
+ int status;
- dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
-
- /* Make sure the SMBus host is ready to start transmitting */
- /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n",
- temp);
- outb_p(temp, SMBHSTSTS);
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
- return -1;
- } else {
- dev_dbg(&I801_dev->dev, "Successful!\n");
+ status = inb_p(SMBHSTSTS);
+ if (status & SMBHSTSTS_HOST_BUSY) {
+ dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n");
+ return -EBUSY;
+ }
+
+ status &= STATUS_FLAGS;
+ if (status) {
+ dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n",
+ status);
+ outb_p(status, SMBHSTSTS);
+ status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+ if (status) {
+ dev_err(&I801_dev->dev,
+ "Failed clearing status flags (%02x)\n",
+ status);
+ return -EBUSY;
}
}
- /* the current contents of SMBHSTCNT can be overwritten, since PEC,
- * INTREN, SMBSCMD are passed in xact */
- outb_p(xact | I801_START, SMBHSTCNT);
+ return 0;
+}
- /* We will always wait for a fraction of a second! */
- do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+/* Convert the status register to an error code, and clear it. */
+static int i801_check_post(int status, int timeout)
+{
+ int result = 0;
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- result = -1;
+ if (timeout) {
+ dev_err(&I801_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
msleep(1);
outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
- }
- if (temp & SMBHSTSTS_FAILED) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
+ /* Check if it worked */
+ status = inb_p(SMBHSTSTS);
+ if ((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & SMBHSTSTS_FAILED))
+ dev_err(&I801_dev->dev,
+ "Failed terminating the transaction\n");
+ outb_p(STATUS_FLAGS, SMBHSTSTS);
+ return -ETIMEDOUT;
}
- if (temp & SMBHSTSTS_BUS_ERR) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
- "until next hard reset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ if (status & SMBHSTSTS_FAILED) {
+ result = -EIO;
+ dev_err(&I801_dev->dev, "Transaction failed\n");
}
-
- if (temp & SMBHSTSTS_DEV_ERR) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
+ if (status & SMBHSTSTS_DEV_ERR) {
+ result = -ENXIO;
+ dev_dbg(&I801_dev->dev, "No response\n");
+ }
+ if (status & SMBHSTSTS_BUS_ERR) {
+ result = -EAGAIN;
+ dev_dbg(&I801_dev->dev, "Lost arbitration\n");
}
- if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
- outb_p(inb(SMBHSTSTS), SMBHSTSTS);
-
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
- "(%02x)\n", temp);
+ if (result) {
+ /* Clear error flags */
+ outb_p(status & STATUS_FLAGS, SMBHSTSTS);
+ status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+ if (status) {
+ dev_warn(&I801_dev->dev, "Failed clearing status "
+ "flags at end of transaction (%02x)\n",
+ status);
+ }
}
- dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
+
return result;
}
+static int i801_transaction(int xact)
+{
+ int status;
+ int result;
+ int timeout = 0;
+
+ result = i801_check_pre();
+ if (result < 0)
+ return result;
+
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * INTREN, SMBSCMD are passed in xact */
+ outb_p(xact | I801_START, SMBHSTCNT);
+
+ /* We will always wait for a fraction of a second! */
+ do {
+ msleep(1);
+ status = inb_p(SMBHSTSTS);
+ } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+
+ result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ if (result < 0)
+ return result;
+
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+ return 0;
+}
+
/* wait for INTR bit as advised by Intel */
static void i801_wait_hwpec(void)
{
int timeout = 0;
- int temp;
+ int status;
do {
msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((!(temp & SMBHSTSTS_INTR))
+ status = inb_p(SMBHSTSTS);
+ } while ((!(status & SMBHSTSTS_INTR))
&& (timeout++ < MAX_TIMEOUT));
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
}
- outb_p(temp, SMBHSTSTS);
+ outb_p(status, SMBHSTSTS);
}
static int i801_block_transaction_by_block(union i2c_smbus_data *data,
char read_write, int hwpec)
{
int i, len;
+ int status;
inb_p(SMBHSTCNT); /* reset the data buffer index */
@@ -242,14 +277,15 @@ static int i801_block_transaction_by_block(union i2c_smbus_data *data,
outb_p(data->block[i+1], SMBBLKDAT);
}
- if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
- I801_PEC_EN * hwpec))
- return -1;
+ status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+ I801_PEC_EN * hwpec);
+ if (status)
+ return status;
if (read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0);
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
- return -1;
+ return -EPROTO;
data->block[0] = len;
for (i = 0; i < len; i++)
@@ -264,10 +300,13 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
{
int i, len;
int smbcmd;
- int temp;
- int result = 0;
+ int status;
+ int result;
int timeout;
- unsigned char errmask;
+
+ result = i801_check_pre();
+ if (result < 0)
+ return result;
len = data->block[0];
@@ -291,36 +330,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
}
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
- dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
-
- /* Make sure the SMBus host is ready to start transmitting */
- temp = inb_p(SMBHSTSTS);
- if (i == 1) {
- /* Erroneous conditions before transaction:
- * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- errmask = 0x9f;
- } else {
- /* Erroneous conditions during transaction:
- * Failed, Bus_Err, Dev_Err, Intr */
- errmask = 0x1e;
- }
- if (temp & errmask) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
- "Resetting...\n", temp);
- outb_p(temp, SMBHSTSTS);
- if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
- dev_err(&I801_dev->dev,
- "Reset failed! (%02x)\n", temp);
- return -1;
- }
- if (i != 1)
- /* if die in middle of block transaction, fail */
- return -1;
- }
-
if (i == 1)
outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
@@ -328,41 +337,28 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
timeout = 0;
do {
msleep(1);
- temp = inb_p(SMBHSTSTS);
+ status = inb_p(SMBHSTSTS);
}
- while ((!(temp & SMBHSTSTS_BYTE_DONE))
+ while ((!(status & SMBHSTSTS_BYTE_DONE))
&& (timeout++ < MAX_TIMEOUT));
- /* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- /* try to stop the current command */
- dev_dbg(&I801_dev->dev, "Terminating the current "
- "operation\n");
- outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
- msleep(1);
- outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
- SMBHSTCNT);
- result = -1;
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- }
-
- if (temp & SMBHSTSTS_FAILED) {
- result = -1;
- dev_dbg(&I801_dev->dev,
- "Error: Failed bus transaction\n");
- } else if (temp & SMBHSTSTS_BUS_ERR) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision!\n");
- } else if (temp & SMBHSTSTS_DEV_ERR) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
- }
+ result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ if (result < 0)
+ return result;
if (i == 1 && read_write == I2C_SMBUS_READ
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0);
- if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
- return -1;
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&I801_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ len);
+ /* Recover */
+ while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY)
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS);
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+ return -EPROTO;
+ }
data->block[0] = len;
}
@@ -371,30 +367,19 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
data->block[i] = inb_p(SMBBLKDAT);
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
outb_p(data->block[i+1], SMBBLKDAT);
- if ((temp & 0x9e) != 0x00)
- outb_p(temp, SMBHSTSTS); /* signals SMBBLKDAT ready */
-
- if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev,
- "Bad status (%02x) at end of transaction\n",
- temp);
- }
- dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
- if (result < 0)
- return result;
+ /* signals SMBBLKDAT ready */
+ outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS);
}
- return result;
+
+ return 0;
}
static int i801_set_block_buffer_mode(void)
{
outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
- return -1;
+ return -EIO;
return 0;
}
@@ -414,7 +399,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
} else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
dev_err(&I801_dev->dev,
"I2C block read is unsupported!\n");
- return -1;
+ return -EOPNOTSUPP;
}
}
@@ -449,7 +434,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 i801_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
@@ -511,10 +496,9 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
outb_p(command, SMBHSTCMD);
block = 1;
break;
- case I2C_SMBUS_PROC_CALL:
default:
dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
- return -1;
+ return -EOPNOTSUPP;
}
if (hwpec) /* enable/disable hardware PEC */
@@ -537,7 +521,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
if(block)
return ret;
if(ret)
- return -1;
+ return ret;
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
return 0;
@@ -572,7 +556,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter i801_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_I801,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
@@ -639,6 +623,10 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
goto exit;
}
+ err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+ if (err)
+ goto exit;
+
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
dev_err(&dev->dev, "Failed to request SMBus region "
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
deleted file mode 100644
index 42e8d94c276..00000000000
--- a/drivers/i2c/busses/i2c-i810.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (c) 1998, 1999, 2000 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Ralph Metzler <rjkm@thp.uni-koeln.de>, and
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
- Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
- Simon Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-/*
- This interfaces to the I810/I815 to provide access to
- the DDC Bus and the I2C Bus.
-
- SUPPORTED DEVICES PCI ID
- i810AA 7121
- i810AB 7123
- i810E 7125
- i815 1132
- i845G 2562
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* GPIO register locations */
-#define I810_IOCONTROL_OFFSET 0x5000
-#define I810_HVSYNC 0x00 /* not used */
-#define I810_GPIOA 0x10
-#define I810_GPIOB 0x14
-
-/* bit locations in the registers */
-#define SCL_DIR_MASK 0x0001
-#define SCL_DIR 0x0002
-#define SCL_VAL_MASK 0x0004
-#define SCL_VAL_OUT 0x0008
-#define SCL_VAL_IN 0x0010
-#define SDA_DIR_MASK 0x0100
-#define SDA_DIR 0x0200
-#define SDA_VAL_MASK 0x0400
-#define SDA_VAL_OUT 0x0800
-#define SDA_VAL_IN 0x1000
-
-/* initialization states */
-#define INIT1 0x1
-#define INIT2 0x2
-#define INIT3 0x4
-
-/* delays */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-static void __iomem *ioaddr;
-
-/* The i810 GPIO registers have individual masks for each bit
- so we never have to read before writing. Nice. */
-
-static void bit_i810i2c_setscl(void *data, int val)
-{
- writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
- ioaddr + I810_GPIOB);
- readl(ioaddr + I810_GPIOB); /* flush posted write */
-}
-
-static void bit_i810i2c_setsda(void *data, int val)
-{
- writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
- ioaddr + I810_GPIOB);
- readl(ioaddr + I810_GPIOB); /* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins could always remain outputs.
- However, some chip versions don't latch the inputs unless they
- are set as inputs.
- We rely on the i2c-algo-bit routines to set the pins high before
- reading the input from other chips. Following guidance in the 815
- prog. ref. guide, we do a "dummy write" of 0 to the register before
- reading which forces the input value to be latched. We presume this
- applies to the 810 as well; shouldn't hurt anyway. This is necessary to get
- i2c_algo_bit bit_test=1 to pass. */
-
-static int bit_i810i2c_getscl(void *data)
-{
- writel(SCL_DIR_MASK, ioaddr + I810_GPIOB);
- writel(0, ioaddr + I810_GPIOB);
- return (0 != (readl(ioaddr + I810_GPIOB) & SCL_VAL_IN));
-}
-
-static int bit_i810i2c_getsda(void *data)
-{
- writel(SDA_DIR_MASK, ioaddr + I810_GPIOB);
- writel(0, ioaddr + I810_GPIOB);
- return (0 != (readl(ioaddr + I810_GPIOB) & SDA_VAL_IN));
-}
-
-static void bit_i810ddc_setscl(void *data, int val)
-{
- writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
- ioaddr + I810_GPIOA);
- readl(ioaddr + I810_GPIOA); /* flush posted write */
-}
-
-static void bit_i810ddc_setsda(void *data, int val)
-{
- writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
- ioaddr + I810_GPIOA);
- readl(ioaddr + I810_GPIOA); /* flush posted write */
-}
-
-static int bit_i810ddc_getscl(void *data)
-{
- writel(SCL_DIR_MASK, ioaddr + I810_GPIOA);
- writel(0, ioaddr + I810_GPIOA);
- return (0 != (readl(ioaddr + I810_GPIOA) & SCL_VAL_IN));
-}
-
-static int bit_i810ddc_getsda(void *data)
-{
- writel(SDA_DIR_MASK, ioaddr + I810_GPIOA);
- writel(0, ioaddr + I810_GPIOA);
- return (0 != (readl(ioaddr + I810_GPIOA) & SDA_VAL_IN));
-}
-
-static int config_i810(struct pci_dev *dev)
-{
- unsigned long cadr;
-
- /* map I810 memory */
- cadr = dev->resource[1].start;
- cadr += I810_IOCONTROL_OFFSET;
- cadr &= PCI_BASE_ADDRESS_MEM_MASK;
- ioaddr = ioremap_nocache(cadr, 0x1000);
- if (ioaddr) {
- bit_i810i2c_setscl(NULL, 1);
- bit_i810i2c_setsda(NULL, 1);
- bit_i810ddc_setscl(NULL, 1);
- bit_i810ddc_setsda(NULL, 1);
- return 0;
- }
- return -ENODEV;
-}
-
-static struct i2c_algo_bit_data i810_i2c_bit_data = {
- .setsda = bit_i810i2c_setsda,
- .setscl = bit_i810i2c_setscl,
- .getsda = bit_i810i2c_getsda,
- .getscl = bit_i810i2c_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT,
-};
-
-static struct i2c_adapter i810_i2c_adapter = {
- .owner = THIS_MODULE,
- .id = I2C_HW_B_I810,
- .name = "I810/I815 I2C Adapter",
- .algo_data = &i810_i2c_bit_data,
-};
-
-static struct i2c_algo_bit_data i810_ddc_bit_data = {
- .setsda = bit_i810ddc_setsda,
- .setscl = bit_i810ddc_setscl,
- .getsda = bit_i810ddc_getsda,
- .getscl = bit_i810ddc_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT,
-};
-
-static struct i2c_adapter i810_ddc_adapter = {
- .owner = THIS_MODULE,
- .id = I2C_HW_B_I810,
- .name = "I810/I815 DDC Adapter",
- .algo_data = &i810_ddc_bit_data,
-};
-
-static struct pci_device_id i810_ids[] __devinitdata = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG1) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810E_IG) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG) },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE (pci, i810_ids);
-
-static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int retval;
-
- retval = config_i810(dev);
- if (retval)
- return retval;
- dev_info(&dev->dev, "i810/i815 i2c device found.\n");
-
- /* set up the sysfs linkage to our parent device */
- i810_i2c_adapter.dev.parent = &dev->dev;
- i810_ddc_adapter.dev.parent = &dev->dev;
-
- retval = i2c_bit_add_bus(&i810_i2c_adapter);
- if (retval)
- return retval;
- retval = i2c_bit_add_bus(&i810_ddc_adapter);
- if (retval)
- i2c_del_adapter(&i810_i2c_adapter);
- return retval;
-}
-
-static void __devexit i810_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&i810_ddc_adapter);
- i2c_del_adapter(&i810_i2c_adapter);
- iounmap(ioaddr);
-}
-
-static struct pci_driver i810_driver = {
- .name = "i810_smbus",
- .id_table = i810_ids,
- .probe = i810_probe,
- .remove = __devexit_p(i810_remove),
-};
-
-static int __init i2c_i810_init(void)
-{
- return pci_register_driver(&i810_driver);
-}
-
-static void __exit i2c_i810_exit(void)
-{
- pci_unregister_driver(&i810_driver);
-}
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "Ralph Metzler <rjkm@thp.uni-koeln.de>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("I810/I815 I2C/DDC driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_i810_init);
-module_exit(i2c_i810_exit);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 85dbf34382e..651f2f1ae5b 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -42,13 +42,8 @@
#include <asm/io.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
-
-#ifdef CONFIG_IBM_OCP
-#include <asm/ocp.h>
-#include <asm/ibm4xx.h>
-#else
#include <linux/of_platform.h>
-#endif
+#include <linux/of_i2c.h>
#include "i2c-ibm_iic.h"
@@ -665,180 +660,6 @@ static inline u8 iic_clckdiv(unsigned int opb)
return (u8)((opb + 9) / 10 - 1);
}
-#ifdef CONFIG_IBM_OCP
-/*
- * Register single IIC interface
- */
-static int __devinit iic_probe(struct ocp_device *ocp){
-
- struct ibm_iic_private* dev;
- struct i2c_adapter* adap;
- struct ocp_func_iic_data* iic_data = ocp->def->additions;
- int ret;
-
- if (!iic_data)
- printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
- ocp->def->index);
-
- if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) {
- printk(KERN_ERR "ibm-iic%d: failed to allocate device data\n",
- ocp->def->index);
- return -ENOMEM;
- }
-
- dev->idx = ocp->def->index;
- ocp_set_drvdata(ocp, dev);
-
- if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
- "ibm_iic")) {
- ret = -EBUSY;
- goto fail1;
- }
-
- if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
- printk(KERN_ERR "ibm-iic%d: failed to ioremap device registers\n",
- dev->idx);
- ret = -ENXIO;
- goto fail2;
- }
-
- init_waitqueue_head(&dev->wq);
-
- dev->irq = iic_force_poll ? -1 : ocp->def->irq;
- if (dev->irq >= 0){
- /* Disable interrupts until we finish initialization,
- assumes level-sensitive IRQ setup...
- */
- iic_interrupt_mode(dev, 0);
- if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
- printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
- dev->idx, dev->irq);
- /* Fallback to the polling mode */
- dev->irq = -1;
- }
- }
-
- if (dev->irq < 0)
- printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
- dev->idx);
-
- /* Board specific settings */
- dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
-
- /* clckdiv is the same for *all* IIC interfaces,
- * but I'd rather make a copy than introduce another global. --ebs
- */
- dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
- DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
-
- /* Initialize IIC interface */
- iic_dev_init(dev);
-
- /* Register it with i2c layer */
- adap = &dev->adap;
- adap->dev.parent = &ocp->dev;
- strcpy(adap->name, "IBM IIC");
- i2c_set_adapdata(adap, dev);
- adap->id = I2C_HW_OCP;
- adap->class = I2C_CLASS_HWMON;
- adap->algo = &iic_algo;
- adap->client_register = NULL;
- adap->client_unregister = NULL;
- adap->timeout = 1;
-
- /*
- * If "dev->idx" is negative we consider it as zero.
- * The reason to do so is to avoid sysfs names that only make
- * sense when there are multiple adapters.
- */
- adap->nr = dev->idx >= 0 ? dev->idx : 0;
-
- if ((ret = i2c_add_numbered_adapter(adap)) < 0) {
- printk(KERN_ERR "ibm-iic%d: failed to register i2c adapter\n",
- dev->idx);
- goto fail;
- }
-
- printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
- dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
-
- return 0;
-
-fail:
- if (dev->irq >= 0){
- iic_interrupt_mode(dev, 0);
- free_irq(dev->irq, dev);
- }
-
- iounmap(dev->vaddr);
-fail2:
- release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
-fail1:
- ocp_set_drvdata(ocp, NULL);
- kfree(dev);
- return ret;
-}
-
-/*
- * Cleanup initialized IIC interface
- */
-static void __devexit iic_remove(struct ocp_device *ocp)
-{
- struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp);
- BUG_ON(dev == NULL);
- if (i2c_del_adapter(&dev->adap)){
- printk(KERN_ERR "ibm-iic%d: failed to delete i2c adapter :(\n",
- dev->idx);
- /* That's *very* bad, just shutdown IRQ ... */
- if (dev->irq >= 0){
- iic_interrupt_mode(dev, 0);
- free_irq(dev->irq, dev);
- dev->irq = -1;
- }
- } else {
- if (dev->irq >= 0){
- iic_interrupt_mode(dev, 0);
- free_irq(dev->irq, dev);
- }
- iounmap(dev->vaddr);
- release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
- kfree(dev);
- }
-}
-
-static struct ocp_device_id ibm_iic_ids[] __devinitdata =
-{
- { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
- { .vendor = OCP_VENDOR_INVALID }
-};
-
-MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
-
-static struct ocp_driver ibm_iic_driver =
-{
- .name = "iic",
- .id_table = ibm_iic_ids,
- .probe = iic_probe,
- .remove = __devexit_p(iic_remove),
-#if defined(CONFIG_PM)
- .suspend = NULL,
- .resume = NULL,
-#endif
-};
-
-static int __init iic_init(void)
-{
- printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
- return ocp_register_driver(&ibm_iic_driver);
-}
-
-static void __exit iic_exit(void)
-{
- ocp_unregister_driver(&ibm_iic_driver);
-}
-
-#else /* !CONFIG_IBM_OCP */
-
static int __devinit iic_request_irq(struct of_device *ofdev,
struct ibm_iic_private *dev)
{
@@ -876,7 +697,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
struct device_node *np = ofdev->node;
struct ibm_iic_private *dev;
struct i2c_adapter *adap;
- const u32 *indexp, *freq;
+ const u32 *freq;
int ret;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
@@ -887,14 +708,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
dev_set_drvdata(&ofdev->dev, dev);
- indexp = of_get_property(np, "index", NULL);
- if (!indexp) {
- dev_err(&ofdev->dev, "no index specified\n");
- ret = -EINVAL;
- goto error_cleanup;
- }
- dev->idx = *indexp;
-
dev->vaddr = of_iomap(np, 0);
if (dev->vaddr == NULL) {
dev_err(&ofdev->dev, "failed to iomap device\n");
@@ -934,17 +747,19 @@ static int __devinit iic_probe(struct of_device *ofdev,
strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
i2c_set_adapdata(adap, dev);
adap->id = I2C_HW_OCP;
- adap->class = I2C_CLASS_HWMON;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &iic_algo;
adap->timeout = 1;
- adap->nr = dev->idx;
- ret = i2c_add_numbered_adapter(adap);
+ ret = i2c_add_adapter(adap);
if (ret < 0) {
dev_err(&ofdev->dev, "failed to register i2c adapter\n");
goto error_cleanup;
}
+ /* Now register all the child nodes */
+ of_register_i2c_devices(adap, np);
+
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
@@ -987,11 +802,7 @@ static int __devexit iic_remove(struct of_device *ofdev)
}
static const struct of_device_id ibm_iic_match[] = {
- { .compatible = "ibm,iic-405ex", },
- { .compatible = "ibm,iic-405gp", },
- { .compatible = "ibm,iic-440gp", },
- { .compatible = "ibm,iic-440gpx", },
- { .compatible = "ibm,iic-440grx", },
+ { .compatible = "ibm,iic", },
{}
};
@@ -1011,7 +822,6 @@ static void __exit iic_exit(void)
{
of_unregister_platform_driver(&ibm_iic_driver);
}
-#endif /* CONFIG_IBM_OCP */
module_init(iic_init);
module_exit(iic_exit);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 39884e79759..fc2714ac0c0 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -482,7 +482,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
- new_adapter->class = I2C_CLASS_HWMON;
+ new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
new_adapter->dev.parent = &pdev->dev;
new_adapter->nr = pdev->id;
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
new file mode 100644
index 00000000000..b9c01aa9003
--- /dev/null
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -0,0 +1,339 @@
+/*
+ i2c-isch.c - Linux kernel driver for Intel SCH chipset SMBus
+ - Based on i2c-piix4.c
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+ Philip Edelbrock <phil@netroedge.com>
+ - Intel SCH support
+ Copyright (c) 2007 - 2008 Jacob Jun Pan <jacob.jun.pan@intel.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License version 2 as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ Supports:
+ Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L)
+ Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+/* SCH SMBus address offsets */
+#define SMBHSTCNT (0 + sch_smba)
+#define SMBHSTSTS (1 + sch_smba)
+#define SMBHSTADD (4 + sch_smba) /* TSA */
+#define SMBHSTCMD (5 + sch_smba)
+#define SMBHSTDAT0 (6 + sch_smba)
+#define SMBHSTDAT1 (7 + sch_smba)
+#define SMBBLKDAT (0x20 + sch_smba)
+
+/* count for request_region */
+#define SMBIOSIZE 64
+
+/* PCI Address Constants */
+#define SMBBA_SCH 0x40
+
+/* Other settings */
+#define MAX_TIMEOUT 500
+
+/* I2C constants */
+#define SCH_QUICK 0x00
+#define SCH_BYTE 0x01
+#define SCH_BYTE_DATA 0x02
+#define SCH_WORD_DATA 0x03
+#define SCH_BLOCK_DATA 0x05
+
+static unsigned short sch_smba;
+static struct pci_driver sch_driver;
+static struct i2c_adapter sch_adapter;
+
+/*
+ * Start the i2c transaction -- the i2c_access will prepare the transaction
+ * and this function will execute it.
+ * return 0 for success and others for failure.
+ */
+static int sch_transaction(void)
+{
+ int temp;
+ int result = 0;
+ int timeout = 0;
+
+ dev_dbg(&sch_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+ "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT),
+ inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0),
+ inb(SMBHSTDAT1));
+
+ /* Make sure the SMBus host is ready to start transmitting */
+ temp = inb(SMBHSTSTS) & 0x0f;
+ if (temp) {
+ /* Can not be busy since we checked it in sch_access */
+ if (temp & 0x01) {
+ dev_dbg(&sch_adapter.dev, "Completion (%02x). "
+ "Clear...\n", temp);
+ }
+ if (temp & 0x06) {
+ dev_dbg(&sch_adapter.dev, "SMBus error (%02x). "
+ "Resetting...\n", temp);
+ }
+ outb(temp, SMBHSTSTS);
+ temp = inb(SMBHSTSTS) & 0x0f;
+ if (temp) {
+ dev_err(&sch_adapter.dev,
+ "SMBus is not ready: (%02x)\n", temp);
+ return -EAGAIN;
+ }
+ }
+
+ /* start the transaction by setting bit 4 */
+ outb(inb(SMBHSTCNT) | 0x10, SMBHSTCNT);
+
+ do {
+ msleep(1);
+ temp = inb(SMBHSTSTS) & 0x0f;
+ } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
+
+ /* If the SMBus is still busy, we give up */
+ if (timeout >= MAX_TIMEOUT) {
+ dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
+ result = -ETIMEDOUT;
+ }
+ if (temp & 0x04) {
+ result = -EIO;
+ dev_dbg(&sch_adapter.dev, "Bus collision! SMBus may be "
+ "locked until next hard reset. (sorry!)\n");
+ /* Clock stops and slave is stuck in mid-transmission */
+ } else if (temp & 0x02) {
+ result = -EIO;
+ dev_err(&sch_adapter.dev, "Error: no response!\n");
+ } else if (temp & 0x01) {
+ dev_dbg(&sch_adapter.dev, "Post complete!\n");
+ outb(temp, SMBHSTSTS);
+ temp = inb(SMBHSTSTS) & 0x07;
+ if (temp & 0x06) {
+ /* Completion clear failed */
+ dev_dbg(&sch_adapter.dev, "Failed reset at end of "
+ "transaction (%02x), Bus error!\n", temp);
+ }
+ } else {
+ result = -ENXIO;
+ dev_dbg(&sch_adapter.dev, "No such address.\n");
+ }
+ dev_dbg(&sch_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+ "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT),
+ inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0),
+ inb(SMBHSTDAT1));
+ return result;
+}
+
+/*
+ * This is the main access entry for i2c-sch access
+ * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write
+ * (0 for read and 1 for write), size is i2c transaction type and data is the
+ * union of transaction for data to be transfered or data read from bus.
+ * return 0 for success and others for failure.
+ */
+static s32 sch_access(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ int i, len, temp, rc;
+
+ /* Make sure the SMBus host is not busy */
+ temp = inb(SMBHSTSTS) & 0x0f;
+ if (temp & 0x08) {
+ dev_dbg(&sch_adapter.dev, "SMBus busy (%02x)\n", temp);
+ return -EAGAIN;
+ }
+ dev_dbg(&sch_adapter.dev, "access size: %d %s\n", size,
+ (read_write)?"READ":"WRITE");
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ outb((addr << 1) | read_write, SMBHSTADD);
+ size = SCH_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ outb((addr << 1) | read_write, SMBHSTADD);
+ if (read_write == I2C_SMBUS_WRITE)
+ outb(command, SMBHSTCMD);
+ size = SCH_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ outb((addr << 1) | read_write, SMBHSTADD);
+ outb(command, SMBHSTCMD);
+ if (read_write == I2C_SMBUS_WRITE)
+ outb(data->byte, SMBHSTDAT0);
+ size = SCH_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ outb((addr << 1) | read_write, SMBHSTADD);
+ outb(command, SMBHSTCMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb(data->word & 0xff, SMBHSTDAT0);
+ outb((data->word & 0xff00) >> 8, SMBHSTDAT1);
+ }
+ size = SCH_WORD_DATA;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ outb((addr << 1) | read_write, SMBHSTADD);
+ outb(command, SMBHSTCMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EINVAL;
+ outb(len, SMBHSTDAT0);
+ for (i = 1; i <= len; i++)
+ outb(data->block[i], SMBBLKDAT+i-1);
+ }
+ size = SCH_BLOCK_DATA;
+ break;
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
+ }
+ dev_dbg(&sch_adapter.dev, "write size %d to 0x%04x\n", size, SMBHSTCNT);
+ outb((inb(SMBHSTCNT) & 0xb0) | (size & 0x7), SMBHSTCNT);
+
+ rc = sch_transaction();
+ if (rc) /* Error in transaction */
+ return rc;
+
+ if ((read_write == I2C_SMBUS_WRITE) || (size == SCH_QUICK))
+ return 0;
+
+ switch (size) {
+ case SCH_BYTE:
+ case SCH_BYTE_DATA:
+ data->byte = inb(SMBHSTDAT0);
+ break;
+ case SCH_WORD_DATA:
+ data->word = inb(SMBHSTDAT0) + (inb(SMBHSTDAT1) << 8);
+ break;
+ case SCH_BLOCK_DATA:
+ data->block[0] = inb(SMBHSTDAT0);
+ if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+ for (i = 1; i <= data->block[0]; i++)
+ data->block[i] = inb(SMBBLKDAT+i-1);
+ break;
+ }
+ return 0;
+}
+
+static u32 sch_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = sch_access,
+ .functionality = sch_func,
+};
+
+static struct i2c_adapter sch_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &smbus_algorithm,
+};
+
+static struct pci_device_id sch_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, sch_ids);
+
+static int __devinit sch_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int retval;
+ unsigned int smba;
+
+ pci_read_config_dword(dev, SMBBA_SCH, &smba);
+ if (!(smba & (1 << 31))) {
+ dev_err(&dev->dev, "SMBus I/O space disabled!\n");
+ return -ENODEV;
+ }
+
+ sch_smba = (unsigned short)smba;
+ if (sch_smba == 0) {
+ dev_err(&dev->dev, "SMBus base address uninitialized!\n");
+ return -ENODEV;
+ }
+ if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name))
+ return -EBUSY;
+ if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) {
+ dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
+ sch_smba);
+ return -EBUSY;
+ }
+ dev_dbg(&dev->dev, "SMBA = 0x%X\n", sch_smba);
+
+ /* set up the sysfs linkage to our parent device */
+ sch_adapter.dev.parent = &dev->dev;
+
+ snprintf(sch_adapter.name, sizeof(sch_adapter.name),
+ "SMBus SCH adapter at %04x", sch_smba);
+
+ retval = i2c_add_adapter(&sch_adapter);
+ if (retval) {
+ dev_err(&dev->dev, "Couldn't register adapter!\n");
+ release_region(sch_smba, SMBIOSIZE);
+ sch_smba = 0;
+ }
+
+ return retval;
+}
+
+static void __devexit sch_remove(struct pci_dev *dev)
+{
+ if (sch_smba) {
+ i2c_del_adapter(&sch_adapter);
+ release_region(sch_smba, SMBIOSIZE);
+ sch_smba = 0;
+ }
+}
+
+static struct pci_driver sch_driver = {
+ .name = "isch_smbus",
+ .id_table = sch_ids,
+ .probe = sch_probe,
+ .remove = __devexit_p(sch_remove),
+};
+
+static int __init i2c_sch_init(void)
+{
+ return pci_register_driver(&sch_driver);
+}
+
+static void __exit i2c_sch_exit(void)
+{
+ pci_unregister_driver(&sch_driver);
+}
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com>");
+MODULE_DESCRIPTION("Intel SCH SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_sch_init);
+module_exit(i2c_sch_exit);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 4fdfb62d6f3..27443f073bc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -312,7 +312,7 @@ static struct i2c_adapter mpc_ops = {
.name = "MPC adapter",
.id = I2C_HW_MPC107,
.algo = &mpc_algo,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.timeout = 1,
};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 036e6a883e6..9e8118d2fe6 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -530,7 +530,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->adapter.id = I2C_HW_MV64XXX;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
- drv_data->adapter.class = I2C_CLASS_HWMON;
+ drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
drv_data->adapter.timeout = pdata->timeout;
drv_data->adapter.nr = pd->id;
platform_set_drvdata(pd, drv_data);
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
new file mode 100644
index 00000000000..6a8995dfd0b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -0,0 +1,257 @@
+/*
+ * i2c-nforce2-s4985.c - i2c-nforce2 extras for the Tyan S4985 motherboard
+ *
+ * Copyright (C) 2008 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * We select the channels by sending commands to the Philips
+ * PCA9556 chip at I2C address 0x18. The main adapter is used for
+ * the non-multiplexed part of the bus, and 4 virtual adapters
+ * are defined for the multiplexed addresses: 0x50-0x53 (memory
+ * module EEPROM) located on channels 1-4. We define one virtual
+ * adapter per CPU, which corresponds to one multiplexed channel:
+ * CPU0: virtual adapter 1, channel 1
+ * CPU1: virtual adapter 2, channel 2
+ * CPU2: virtual adapter 3, channel 3
+ * CPU3: virtual adapter 4, channel 4
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+extern struct i2c_adapter *nforce2_smbus;
+
+static struct i2c_adapter *s4985_adapter;
+static struct i2c_algorithm *s4985_algo;
+
+/* Wrapper access functions for multiplexed SMBus */
+static DEFINE_MUTEX(nforce2_lock);
+
+static s32 nforce2_access_virt0(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ int error;
+
+ /* We exclude the multiplexed addresses */
+ if ((addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
+ || addr == 0x18)
+ return -ENXIO;
+
+ mutex_lock(&nforce2_lock);
+ error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
+ command, size, data);
+ mutex_unlock(&nforce2_lock);
+
+ return error;
+}
+
+/* We remember the last used channels combination so as to only switch
+ channels when it is really needed. This greatly reduces the SMBus
+ overhead, but also assumes that nobody will be writing to the PCA9556
+ in our back. */
+static u8 last_channels;
+
+static inline s32 nforce2_access_channel(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data,
+ u8 channels)
+{
+ int error;
+
+ /* We exclude the non-multiplexed addresses */
+ if ((addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
+ return -ENXIO;
+
+ mutex_lock(&nforce2_lock);
+ if (last_channels != channels) {
+ union i2c_smbus_data mplxdata;
+ mplxdata.byte = channels;
+
+ error = nforce2_smbus->algo->smbus_xfer(adap, 0x18, 0,
+ I2C_SMBUS_WRITE, 0x01,
+ I2C_SMBUS_BYTE_DATA,
+ &mplxdata);
+ if (error)
+ goto UNLOCK;
+ last_channels = channels;
+ }
+ error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
+ command, size, data);
+
+UNLOCK:
+ mutex_unlock(&nforce2_lock);
+ return error;
+}
+
+static s32 nforce2_access_virt1(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ /* CPU0: channel 1 enabled */
+ return nforce2_access_channel(adap, addr, flags, read_write, command,
+ size, data, 0x02);
+}
+
+static s32 nforce2_access_virt2(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ /* CPU1: channel 2 enabled */
+ return nforce2_access_channel(adap, addr, flags, read_write, command,
+ size, data, 0x04);
+}
+
+static s32 nforce2_access_virt3(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ /* CPU2: channel 3 enabled */
+ return nforce2_access_channel(adap, addr, flags, read_write, command,
+ size, data, 0x08);
+}
+
+static s32 nforce2_access_virt4(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ /* CPU3: channel 4 enabled */
+ return nforce2_access_channel(adap, addr, flags, read_write, command,
+ size, data, 0x10);
+}
+
+static int __init nforce2_s4985_init(void)
+{
+ int i, error;
+ union i2c_smbus_data ioconfig;
+
+ /* Unregister physical bus */
+ if (!nforce2_smbus)
+ return -ENODEV;
+ error = i2c_del_adapter(nforce2_smbus);
+ if (error) {
+ dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
+ goto ERROR0;
+ }
+
+ printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4985\n");
+ /* Define the 5 virtual adapters and algorithms structures */
+ s4985_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (!s4985_adapter) {
+ error = -ENOMEM;
+ goto ERROR1;
+ }
+ s4985_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL);
+ if (!s4985_algo) {
+ error = -ENOMEM;
+ goto ERROR2;
+ }
+
+ /* Fill in the new structures */
+ s4985_algo[0] = *(nforce2_smbus->algo);
+ s4985_algo[0].smbus_xfer = nforce2_access_virt0;
+ s4985_adapter[0] = *nforce2_smbus;
+ s4985_adapter[0].algo = s4985_algo;
+ s4985_adapter[0].dev.parent = nforce2_smbus->dev.parent;
+ for (i = 1; i < 5; i++) {
+ s4985_algo[i] = *(nforce2_smbus->algo);
+ s4985_adapter[i] = *nforce2_smbus;
+ snprintf(s4985_adapter[i].name, sizeof(s4985_adapter[i].name),
+ "SMBus nForce2 adapter (CPU%d)", i - 1);
+ s4985_adapter[i].algo = s4985_algo + i;
+ s4985_adapter[i].dev.parent = nforce2_smbus->dev.parent;
+ }
+ s4985_algo[1].smbus_xfer = nforce2_access_virt1;
+ s4985_algo[2].smbus_xfer = nforce2_access_virt2;
+ s4985_algo[3].smbus_xfer = nforce2_access_virt3;
+ s4985_algo[4].smbus_xfer = nforce2_access_virt4;
+
+ /* Configure the PCA9556 multiplexer */
+ ioconfig.byte = 0x00; /* All I/O to output mode */
+ error = nforce2_smbus->algo->smbus_xfer(nforce2_smbus, 0x18, 0,
+ I2C_SMBUS_WRITE, 0x03,
+ I2C_SMBUS_BYTE_DATA, &ioconfig);
+ if (error) {
+ dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
+ error = -EIO;
+ goto ERROR3;
+ }
+
+ /* Register virtual adapters */
+ for (i = 0; i < 5; i++) {
+ error = i2c_add_adapter(s4985_adapter + i);
+ if (error) {
+ dev_err(&nforce2_smbus->dev,
+ "Virtual adapter %d registration "
+ "failed, module not inserted\n", i);
+ for (i--; i >= 0; i--)
+ i2c_del_adapter(s4985_adapter + i);
+ goto ERROR3;
+ }
+ }
+
+ return 0;
+
+ERROR3:
+ kfree(s4985_algo);
+ s4985_algo = NULL;
+ERROR2:
+ kfree(s4985_adapter);
+ s4985_adapter = NULL;
+ERROR1:
+ /* Restore physical bus */
+ i2c_add_adapter(nforce2_smbus);
+ERROR0:
+ return error;
+}
+
+static void __exit nforce2_s4985_exit(void)
+{
+ if (s4985_adapter) {
+ int i;
+
+ for (i = 0; i < 5; i++)
+ i2c_del_adapter(s4985_adapter+i);
+ kfree(s4985_adapter);
+ s4985_adapter = NULL;
+ }
+ kfree(s4985_algo);
+ s4985_algo = NULL;
+
+ /* Restore physical bus */
+ if (i2c_add_adapter(nforce2_smbus))
+ dev_err(&nforce2_smbus->dev, "Physical bus restoration "
+ "failed\n");
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("S4985 SMBus multiplexing");
+MODULE_LICENSE("GPL");
+
+module_init(nforce2_s4985_init);
+module_exit(nforce2_s4985_exit);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 43c9f8df950..3b19bc41a60 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -51,6 +51,7 @@
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/dmi.h>
+#include <linux/acpi.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
@@ -124,6 +125,20 @@ static struct dmi_system_id __devinitdata nforce2_dmi_blacklist2[] = {
static struct pci_driver nforce2_driver;
+/* For multiplexing support, we need a global reference to the 1st
+ SMBus channel */
+#if defined CONFIG_I2C_NFORCE2_S4985 || defined CONFIG_I2C_NFORCE2_S4985_MODULE
+struct i2c_adapter *nforce2_smbus;
+EXPORT_SYMBOL_GPL(nforce2_smbus);
+
+static void nforce2_set_reference(struct i2c_adapter *adap)
+{
+ nforce2_smbus = adap;
+}
+#else
+static inline void nforce2_set_reference(struct i2c_adapter *adap) { }
+#endif
+
static void nforce2_abort(struct i2c_adapter *adap)
{
struct nforce2_smbus *smbus = adap->algo_data;
@@ -158,16 +173,16 @@ static int nforce2_check_status(struct i2c_adapter *adap)
dev_dbg(&adap->dev, "SMBus Timeout!\n");
if (smbus->can_abort)
nforce2_abort(adap);
- return -1;
+ return -ETIMEDOUT;
}
if (!(temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
dev_dbg(&adap->dev, "Transaction failed (0x%02x)!\n", temp);
- return -1;
+ return -EIO;
}
return 0;
}
-/* Return -1 on error */
+/* Return negative errno on error */
static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
@@ -175,7 +190,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec;
u8 len;
- int i;
+ int i, status;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
NVIDIA_SMB_PRTCL_WRITE;
@@ -219,7 +234,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
"Transaction failed "
"(requested block size: %d)\n",
len);
- return -1;
+ return -EINVAL;
}
outb_p(len, NVIDIA_SMB_BCNT);
for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
@@ -231,14 +246,15 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
- return -1;
+ return -EOPNOTSUPP;
}
outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
outb_p(protocol, NVIDIA_SMB_PRTCL);
- if (nforce2_check_status(adap))
- return -1;
+ status = nforce2_check_status(adap);
+ if (status)
+ return status;
if (read_write == I2C_SMBUS_WRITE)
return 0;
@@ -260,7 +276,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
dev_err(&adap->dev, "Transaction failed "
"(received block size: 0x%02x)\n",
len);
- return -1;
+ return -EPROTO;
}
for (i = 0; i < len; i++)
data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
@@ -321,21 +337,26 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
!= PCIBIOS_SUCCESSFUL) {
dev_err(&dev->dev, "Error reading PCI config for %s\n",
name);
- return -1;
+ return -EIO;
}
smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
smbus->size = 64;
}
+ error = acpi_check_region(smbus->base, smbus->size,
+ nforce2_driver.name);
+ if (error)
+ return -1;
+
if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
smbus->base, smbus->base+smbus->size-1, name);
- return -1;
+ return -EBUSY;
}
smbus->adapter.owner = THIS_MODULE;
smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
- smbus->adapter.class = I2C_CLASS_HWMON;
+ smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
smbus->adapter.dev.parent = &dev->dev;
@@ -346,7 +367,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
if (error) {
dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
release_region(smbus->base, smbus->size);
- return -1;
+ return error;
}
dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base);
return 0;
@@ -398,6 +419,7 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
return -ENODEV;
}
+ nforce2_set_reference(&smbuses[0].adapter);
return 0;
}
@@ -406,6 +428,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev)
{
struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev);
+ nforce2_set_reference(NULL);
if (smbuses[0].base) {
i2c_del_adapter(&smbuses[0].adapter);
release_region(smbuses[0].base, smbuses[0].size);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index f145692cbb7..e5193bf7548 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -29,6 +29,7 @@ struct ocores_i2c {
int pos;
int nmsgs;
int state; /* see STATE_ */
+ int clock_khz;
};
/* registers */
@@ -173,8 +174,7 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
return -ETIMEDOUT;
}
-static void ocores_init(struct ocores_i2c *i2c,
- struct ocores_i2c_platform_data *pdata)
+static void ocores_init(struct ocores_i2c *i2c)
{
int prescale;
u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
@@ -182,7 +182,7 @@ static void ocores_init(struct ocores_i2c *i2c,
/* make sure the device is disabled */
oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
- prescale = (pdata->clock_khz / (5*100)) - 1;
+ prescale = (i2c->clock_khz / (5*100)) - 1;
oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff);
oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);
@@ -205,7 +205,7 @@ static const struct i2c_algorithm ocores_algorithm = {
static struct i2c_adapter ocores_adapter = {
.owner = THIS_MODULE,
.name = "i2c-ocores",
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &ocores_algorithm,
};
@@ -248,7 +248,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
}
i2c->regstep = pdata->regstep;
- ocores_init(i2c, pdata);
+ i2c->clock_khz = pdata->clock_khz;
+ ocores_init(i2c);
init_waitqueue_head(&i2c->wait);
ret = request_irq(res2->start, ocores_isr, 0, pdev->name, i2c);
@@ -312,13 +313,40 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+ u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+
+ /* make sure the device is disabled */
+ oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+ return 0;
+}
+
+static int ocores_i2c_resume(struct platform_device *pdev)
+{
+ struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+
+ ocores_init(i2c);
+
+ return 0;
+}
+#else
+#define ocores_i2c_suspend NULL
+#define ocores_i2c_resume NULL
+#endif
+
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:ocores-i2c");
static struct platform_driver ocores_i2c_driver = {
- .probe = ocores_i2c_probe,
- .remove = __devexit_p(ocores_i2c_remove),
- .driver = {
+ .probe = ocores_i2c_probe,
+ .remove = __devexit_p(ocores_i2c_remove),
+ .suspend = ocores_i2c_suspend,
+ .resume = ocores_i2c_resume,
+ .driver = {
.owner = THIS_MODULE,
.name = "ocores-i2c",
},
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index 1603c81e39d..adf0fbb902f 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -365,7 +365,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev,
smbus->adapter.owner = THIS_MODULE;
snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"PA Semi SMBus adapter at 0x%lx", smbus->base);
- smbus->adapter.class = I2C_CLASS_HWMON;
+ smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
smbus->adapter.nr = PCI_FUNC(dev->devfn);
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 9d75f51e8f0..6bb15ad0a6b 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -163,7 +163,7 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
i2c->reg_base = ioremap(res->start, res_len(res));
if (!i2c->reg_base) {
- ret = -EIO;
+ ret = -ENOMEM;
goto e_remap;
}
i2c->io_base = res->start;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index ac916596858..eaa9b387543 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -1,6 +1,4 @@
/*
- piix4.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
Philip Edelbrock <phil@netroedge.com>
@@ -39,16 +37,10 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/acpi.h>
#include <asm/io.h>
-struct sd {
- const unsigned short mfr;
- const unsigned short dev;
- const unsigned char fn;
- const char *name;
-};
-
/* PIIX4 SMBus address offsets */
#define SMBHSTSTS (0 + piix4_smba)
#define SMBHSLVSTS (1 + piix4_smba)
@@ -101,8 +93,6 @@ MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
"EXTREMELY DANGEROUS!");
-static int piix4_transaction(void);
-
static unsigned short piix4_smba;
static int srvrworks_csb5_delay;
static struct pci_driver piix4_driver;
@@ -141,8 +131,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
{
unsigned char temp;
- dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev));
-
if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
(PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
srvrworks_csb5_delay = 1;
@@ -172,17 +160,20 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
piix4_smba &= 0xfff0;
if(piix4_smba == 0) {
- dev_err(&PIIX4_dev->dev, "SMB base address "
+ dev_err(&PIIX4_dev->dev, "SMBus base address "
"uninitialized - upgrade BIOS or use "
"force_addr=0xaddr\n");
return -ENODEV;
}
}
+ if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+ return -EBUSY;
+
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
- dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
+ dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
piix4_smba);
- return -ENODEV;
+ return -EBUSY;
}
pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
@@ -228,13 +219,13 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
"(or code out of date)!\n");
pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
- dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp);
- dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba);
+ dev_info(&PIIX4_dev->dev,
+ "SMBus Host Controller at 0x%x, revision %d\n",
+ piix4_smba, temp);
return 0;
}
-/* Another internally used function */
static int piix4_transaction(void)
{
int temp;
@@ -253,7 +244,7 @@ static int piix4_transaction(void)
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp);
- return -1;
+ return -EBUSY;
} else {
dev_dbg(&piix4_adapter.dev, "Successful!\n");
}
@@ -275,23 +266,23 @@ static int piix4_transaction(void)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
- result = -1;
+ result = -ETIMEDOUT;
}
if (temp & 0x10) {
- result = -1;
+ result = -EIO;
dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n");
}
if (temp & 0x08) {
- result = -1;
+ result = -EIO;
dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be "
"locked until next hard reset. (sorry!)\n");
/* Clock stops and slave is stuck in mid-transmission */
}
if (temp & 0x04) {
- result = -1;
+ result = -ENXIO;
dev_dbg(&piix4_adapter.dev, "Error: no response!\n");
}
@@ -309,31 +300,29 @@ static int piix4_transaction(void)
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
{
int i, len;
+ int status;
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
case I2C_SMBUS_QUICK:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p((addr << 1) | read_write,
SMBHSTADD);
size = PIIX4_QUICK;
break;
case I2C_SMBUS_BYTE:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p((addr << 1) | read_write,
SMBHSTADD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD);
size = PIIX4_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p((addr << 1) | read_write,
SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE)
@@ -341,7 +330,7 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
size = PIIX4_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p((addr << 1) | read_write,
SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
@@ -351,15 +340,13 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
size = PIIX4_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p((addr << 1) | read_write,
SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
- if (len < 0)
- len = 0;
- if (len > 32)
- len = 32;
+ if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EINVAL;
outb_p(len, SMBHSTDAT0);
i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
@@ -367,12 +354,16 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
}
size = PIIX4_BLOCK_DATA;
break;
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
}
outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
- if (piix4_transaction()) /* Error in transaction */
- return -1;
+ status = piix4_transaction();
+ if (status)
+ return status;
if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
return 0;
@@ -388,6 +379,8 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
break;
case PIIX4_BLOCK_DATA:
data->block[0] = inb_p(SMBHSTDAT0);
+ if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);
@@ -411,7 +404,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter piix4_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_PIIX4,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 63b3e2c11cf..dcf2045b522 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -622,7 +622,7 @@ static struct i2c_algorithm pmcmsptwi_algo = {
static struct i2c_adapter pmcmsptwi_adapter = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &pmcmsptwi_algo,
.name = DRV_NAME,
};
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
deleted file mode 100644
index 07c1f1e27df..00000000000
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * kernel/busses/i2c-prosavage.c
- *
- * i2c bus driver for S3/VIA 8365/8375 graphics processor.
- * Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
- * Based on code written by:
- * Frodo Looijaard <frodol@dds.nl>,
- * Philip Edelbrock <phil@netroedge.com>,
- * Ralph Metzler <rjkm@thp.uni-koeln.de>, and
- * Mark D. Studebaker <mdsxyz123@yahoo.com>
- * Simon Vogl
- * and others
- *
- * Please read the lm_sensors documentation for details on use.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-/* 18-05-2003 HVE - created
- * 14-06-2003 HVE - adapted for lm_sensors2
- * 17-06-2003 HVE - linux 2.5.xx compatible
- * 18-06-2003 HVE - codingstyle
- * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
- * codingstyle, mmio enabled
- *
- * This driver interfaces to the I2C bus of the VIA north bridge embedded
- * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
- *
- * Graphics cores:
- * S3/VIA KM266/VT8375 aka ProSavage8
- * S3/VIA KM133/VT8365 aka Savage4
- *
- * Two serial busses are implemented:
- * SERIAL1 - I2C serial communications interface
- * SERIAL2 - DDC2 monitor communications interface
- *
- * Tested on a FX41 mainboard, see http://www.shuttle.com
- *
- *
- * TODO:
- * - integration with prosavage framebuffer device
- * (Additional documentation needed :(
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/*
- * driver configuration
- */
-#define MAX_BUSSES 2
-
-struct s_i2c_bus {
- void __iomem *mmvga;
- int i2c_reg;
- int adap_ok;
- struct i2c_adapter adap;
- struct i2c_algo_bit_data algo;
-};
-
-struct s_i2c_chip {
- void __iomem *mmio;
- struct s_i2c_bus i2c_bus[MAX_BUSSES];
-};
-
-
-/*
- * i2c configuration
- */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-
-/*
- * S3/VIA 8365/8375 registers
- */
-#define VGA_CR_IX 0x3d4
-#define VGA_CR_DATA 0x3d5
-
-#define CR_SERIAL1 0xa0 /* I2C serial communications interface */
-#define MM_SERIAL1 0xff20
-#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */
-
-/* based on vt8365 documentation */
-#define I2C_ENAB 0x10
-#define I2C_SCL_OUT 0x01
-#define I2C_SDA_OUT 0x02
-#define I2C_SCL_IN 0x04
-#define I2C_SDA_IN 0x08
-
-#define SET_CR_IX(p, val) writeb((val), (p)->mmvga + VGA_CR_IX)
-#define SET_CR_DATA(p, val) writeb((val), (p)->mmvga + VGA_CR_DATA)
-#define GET_CR_DATA(p) readb((p)->mmvga + VGA_CR_DATA)
-
-
-/*
- * Serial bus line handling
- *
- * serial communications register as parameter in private data
- *
- * TODO: locks with other code sections accessing video registers?
- */
-static void bit_s3via_setscl(void *bus, int val)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
- unsigned int r;
-
- SET_CR_IX(p, p->i2c_reg);
- r = GET_CR_DATA(p);
- r |= I2C_ENAB;
- if (val) {
- r |= I2C_SCL_OUT;
- } else {
- r &= ~I2C_SCL_OUT;
- }
- SET_CR_DATA(p, r);
-}
-
-static void bit_s3via_setsda(void *bus, int val)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
- unsigned int r;
-
- SET_CR_IX(p, p->i2c_reg);
- r = GET_CR_DATA(p);
- r |= I2C_ENAB;
- if (val) {
- r |= I2C_SDA_OUT;
- } else {
- r &= ~I2C_SDA_OUT;
- }
- SET_CR_DATA(p, r);
-}
-
-static int bit_s3via_getscl(void *bus)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
- SET_CR_IX(p, p->i2c_reg);
- return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
-}
-
-static int bit_s3via_getsda(void *bus)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
- SET_CR_IX(p, p->i2c_reg);
- return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
-}
-
-
-/*
- * adapter initialisation
- */
-static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg)
-{
- int ret;
- p->adap.owner = THIS_MODULE;
- p->adap.id = I2C_HW_B_S3VIA;
- p->adap.algo_data = &p->algo;
- p->adap.dev.parent = &dev->dev;
- p->algo.setsda = bit_s3via_setsda;
- p->algo.setscl = bit_s3via_setscl;
- p->algo.getsda = bit_s3via_getsda;
- p->algo.getscl = bit_s3via_getscl;
- p->algo.udelay = CYCLE_DELAY;
- p->algo.timeout = TIMEOUT;
- p->algo.data = p;
- p->mmvga = mmvga;
- p->i2c_reg = i2c_reg;
-
- ret = i2c_bit_add_bus(&p->adap);
- if (ret) {
- return ret;
- }
-
- p->adap_ok = 1;
- return 0;
-}
-
-
-/*
- * Cleanup stuff
- */
-static void prosavage_remove(struct pci_dev *dev)
-{
- struct s_i2c_chip *chip;
- int i, ret;
-
- chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
-
- if (!chip) {
- return;
- }
- for (i = MAX_BUSSES - 1; i >= 0; i--) {
- if (chip->i2c_bus[i].adap_ok == 0)
- continue;
-
- ret = i2c_del_adapter(&chip->i2c_bus[i].adap);
- if (ret) {
- dev_err(&dev->dev, "%s not removed\n",
- chip->i2c_bus[i].adap.name);
- }
- }
- if (chip->mmio) {
- iounmap(chip->mmio);
- }
- kfree(chip);
-}
-
-
-/*
- * Detect chip and initialize it
- */
-static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int ret;
- unsigned long base, len;
- struct s_i2c_chip *chip;
- struct s_i2c_bus *bus;
-
- pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
- chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
- if (chip == NULL) {
- return -ENOMEM;
- }
-
- base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
- len = dev->resource[0].end - base + 1;
- chip->mmio = ioremap_nocache(base, len);
-
- if (chip->mmio == NULL) {
- dev_err(&dev->dev, "ioremap failed\n");
- prosavage_remove(dev);
- return -ENODEV;
- }
-
-
- /*
- * Chip initialisation
- */
- /* Unlock Extended IO Space ??? */
-
-
- /*
- * i2c bus registration
- */
- bus = &chip->i2c_bus[0];
- snprintf(bus->adap.name, sizeof(bus->adap.name),
- "ProSavage I2C bus at %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
- if (ret) {
- goto err_adap;
- }
- /*
- * ddc bus registration
- */
- bus = &chip->i2c_bus[1];
- snprintf(bus->adap.name, sizeof(bus->adap.name),
- "ProSavage DDC bus at %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
- if (ret) {
- goto err_adap;
- }
- return 0;
-err_adap:
- dev_err(&dev->dev, "%s failed\n", bus->adap.name);
- prosavage_remove(dev);
- return ret;
-}
-
-
-/*
- * Data for PCI driver interface
- */
-static struct pci_device_id prosavage_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
-
-static struct pci_driver prosavage_driver = {
- .name = "prosavage_smbus",
- .id_table = prosavage_pci_tbl,
- .probe = prosavage_probe,
- .remove = prosavage_remove,
-};
-
-static int __init i2c_prosavage_init(void)
-{
- return pci_register_driver(&prosavage_driver);
-}
-
-static void __exit i2c_prosavage_exit(void)
-{
- pci_unregister_driver(&prosavage_driver);
-}
-
-MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
-MODULE_AUTHOR("Henk Vergonet");
-MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
-MODULE_LICENSE("GPL");
-
-module_init (i2c_prosavage_init);
-module_exit (i2c_prosavage_exit);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index dde6ce963a1..af9e6034d7f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1104,5 +1104,5 @@ static void __exit i2c_adap_pxa_exit(void)
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pxa2xx-i2c");
-module_init(i2c_adap_pxa_init);
+subsys_initcall(i2c_adap_pxa_init);
module_exit(i2c_adap_pxa_exit);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 9e8c875437b..007390ad981 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -590,7 +590,7 @@ static struct s3c24xx_i2c s3c24xx_i2c = {
.owner = THIS_MODULE,
.algo = &s3c24xx_i2c_algorithm,
.retries = 2,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
},
};
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
deleted file mode 100644
index 8adf4abaa03..00000000000
--- a/drivers/i2c/busses/i2c-savage4.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (C) 1998-2003 The LM Sensors Team
- Alexander Wold <awold@bigfoot.com>
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
- Based on i2c-voodoo3.c.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This interfaces to the I2C bus of the Savage4 to gain access to
- the BT869 and possibly other I2C devices. The DDC bus is not
- yet supported because its register is not memory-mapped.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* device IDs */
-#define PCI_CHIP_SAVAGE4 0x8A22
-#define PCI_CHIP_SAVAGE2000 0x9102
-
-#define REG 0xff20 /* Serial Port 1 Register */
-
-/* bit locations in the register */
-#define I2C_ENAB 0x00000020
-#define I2C_SCL_OUT 0x00000001
-#define I2C_SDA_OUT 0x00000002
-#define I2C_SCL_IN 0x00000008
-#define I2C_SDA_IN 0x00000010
-
-/* delays */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-
-static void __iomem *ioaddr;
-
-/* The sav GPIO registers don't have individual masks for each bit
- so we always have to read before writing. */
-
-static void bit_savi2c_setscl(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if(val)
- r |= I2C_SCL_OUT;
- else
- r &= ~I2C_SCL_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static void bit_savi2c_setsda(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if(val)
- r |= I2C_SDA_OUT;
- else
- r &= ~I2C_SDA_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins always remain outputs.
- We rely on the i2c-algo-bit routines to set the pins high before
- reading the input from other chips. */
-
-static int bit_savi2c_getscl(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
-}
-
-static int bit_savi2c_getsda(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
-}
-
-/* Configures the chip */
-
-static int config_s4(struct pci_dev *dev)
-{
- unsigned long cadr;
-
- /* map memory */
- cadr = dev->resource[0].start;
- cadr &= PCI_BASE_ADDRESS_MEM_MASK;
- ioaddr = ioremap_nocache(cadr, 0x0080000);
- if (ioaddr) {
- /* writel(0x8160, ioaddr + REG2); */
- writel(0x00000020, ioaddr + REG);
- dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr);
- return 0;
- }
- return -ENODEV;
-}
-
-static struct i2c_algo_bit_data sav_i2c_bit_data = {
- .setsda = bit_savi2c_setsda,
- .setscl = bit_savi2c_setscl,
- .getsda = bit_savi2c_getsda,
- .getscl = bit_savi2c_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT
-};
-
-static struct i2c_adapter savage4_i2c_adapter = {
- .owner = THIS_MODULE,
- .id = I2C_HW_B_SAVAGE,
- .name = "I2C Savage4 adapter",
- .algo_data = &sav_i2c_bit_data,
-};
-
-static struct pci_device_id savage4_ids[] __devinitdata = {
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) },
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE (pci, savage4_ids);
-
-static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int retval;
-
- retval = config_s4(dev);
- if (retval)
- return retval;
-
- /* set up the sysfs linkage to our parent device */
- savage4_i2c_adapter.dev.parent = &dev->dev;
-
- return i2c_bit_add_bus(&savage4_i2c_adapter);
-}
-
-static void __devexit savage4_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&savage4_i2c_adapter);
- iounmap(ioaddr);
-}
-
-static struct pci_driver savage4_driver = {
- .name = "savage4_smbus",
- .id_table = savage4_ids,
- .probe = savage4_probe,
- .remove = __devexit_p(savage4_remove),
-};
-
-static int __init i2c_savage4_init(void)
-{
- return pci_register_driver(&savage4_driver);
-}
-
-static void __exit i2c_savage4_exit(void)
-{
- pci_unregister_driver(&savage4_driver);
-}
-
-MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_savage4_init);
-module_exit(i2c_savage4_exit);
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 114634da6c6..4ddefbf238e 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -143,7 +143,7 @@ static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
- return i2c_add_adapter(i2c_adap);
+ return i2c_add_numbered_adapter(i2c_adap);
}
@@ -156,17 +156,19 @@ static struct i2c_adapter sibyte_board_adapter[2] = {
{
.owner = THIS_MODULE,
.id = I2C_HW_SIBYTE,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[0],
+ .nr = 0,
.name = "SiByte SMBus 0",
},
{
.owner = THIS_MODULE,
.id = I2C_HW_SIBYTE,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[1],
+ .nr = 1,
.name = "SiByte SMBus 1",
},
};
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 9ca8f9155f9..dfc2d5eb6a6 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -1,6 +1,4 @@
/*
- sis5595.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
Philip Edelbrock <phil@netroedge.com>
@@ -62,6 +60,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <asm/io.h>
static int blacklist[] = {
@@ -174,6 +173,11 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
/* NB: We grab just the two SMBus registers here, but this may still
* interfere with ACPI :-( */
+ retval = acpi_check_region(sis5595_base + SMB_INDEX, 2,
+ sis5595_driver.name);
+ if (retval)
+ return retval;
+
if (!request_region(sis5595_base + SMB_INDEX, 2,
sis5595_driver.name)) {
dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
@@ -236,7 +240,7 @@ static int sis5595_transaction(struct i2c_adapter *adap)
sis5595_write(SMB_STS_HI, temp >> 8);
if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) {
dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
- return -1;
+ return -EBUSY;
} else {
dev_dbg(&adap->dev, "Successful!\n");
}
@@ -254,19 +258,19 @@ static int sis5595_transaction(struct i2c_adapter *adap)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
- result = -1;
+ result = -ETIMEDOUT;
}
if (temp & 0x10) {
dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
- result = -1;
+ result = -ENXIO;
}
if (temp & 0x20) {
dev_err(&adap->dev, "Bus collision! SMBus may be locked until "
"next hard reset (or not...)\n");
/* Clock stops and slave is stuck in mid-transmission */
- result = -1;
+ result = -EIO;
}
temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
@@ -282,11 +286,13 @@ static int sis5595_transaction(struct i2c_adapter *adap)
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
+ int status;
+
switch (size) {
case I2C_SMBUS_QUICK:
sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
@@ -318,13 +324,14 @@ static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
break;
default:
dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
- return -1;
+ return -EOPNOTSUPP;
}
sis5595_write(SMB_CTL_LO, ((size & 0x0E)));
- if (sis5595_transaction(adap))
- return -1;
+ status = sis5595_transaction(adap);
+ if (status)
+ return status;
if ((size != SIS5595_PROC_CALL) &&
((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK)))
@@ -359,7 +366,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis5595_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_SIS5595,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 3765dd7f450..e7c4b790da5 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -1,7 +1,4 @@
/*
- i2c-sis630.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
-
Copyright (c) 2002,2003 Alexander Malysh <amalysh@web.de>
This program is free software; you can redistribute it and/or modify
@@ -55,6 +52,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* SIS630 SMBus registers */
@@ -134,7 +132,7 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc
if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
- return -1;
+ return -EBUSY;
} else {
dev_dbg(&adap->dev, "Successful!\n");
}
@@ -177,17 +175,17 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
- result = -1;
+ result = -ETIMEDOUT;
}
if (temp & 0x02) {
dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
- result = -1;
+ result = -ENXIO;
}
if (temp & 0x04) {
dev_err(&adap->dev, "Bus collision!\n");
- result = -1;
+ result = -EIO;
/*
TBD: Datasheet say:
the software should clear this bit and restart SMBUS operation.
@@ -250,8 +248,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
if (i==8 || (len<8 && i==len)) {
dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i);
/* first transaction */
- if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock))
- return -1;
+ rc = sis630_transaction_start(adap,
+ SIS630_BLOCK_DATA, &oldclock);
+ if (rc)
+ return rc;
}
else if ((i-1)%8 == 7 || i==len) {
dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i);
@@ -264,9 +264,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
*/
sis630_write(SMB_STS,0x10);
}
- if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
+ rc = sis630_transaction_wait(adap,
+ SIS630_BLOCK_DATA);
+ if (rc) {
dev_dbg(&adap->dev, "trans_wait failed\n");
- rc = -1;
break;
}
}
@@ -275,13 +276,14 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
else {
/* read request */
data->block[0] = len = 0;
- if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) {
- return -1;
- }
+ rc = sis630_transaction_start(adap,
+ SIS630_BLOCK_DATA, &oldclock);
+ if (rc)
+ return rc;
do {
- if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
+ rc = sis630_transaction_wait(adap, SIS630_BLOCK_DATA);
+ if (rc) {
dev_dbg(&adap->dev, "trans_wait failed\n");
- rc = -1;
break;
}
/* if this first transaction then read byte count */
@@ -311,11 +313,13 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
return rc;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
+ int status;
+
switch (size) {
case I2C_SMBUS_QUICK:
sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
@@ -350,13 +354,14 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
size = SIS630_BLOCK_DATA;
return sis630_block_data(adap, data, read_write);
default:
- printk("Unsupported I2C size\n");
- return -1;
- break;
+ dev_warn(&adap->dev, "Unsupported transaction %d\n",
+ size);
+ return -EOPNOTSUPP;
}
- if (sis630_transaction(adap, size))
- return -1;
+ status = sis630_transaction(adap, size);
+ if (status)
+ return status;
if ((size != SIS630_PCALL) &&
((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) {
@@ -372,9 +377,6 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
case SIS630_WORD_DATA:
data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8);
break;
- default:
- return -1;
- break;
}
return 0;
@@ -433,6 +435,11 @@ static int sis630_setup(struct pci_dev *sis630_dev)
dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
+ retval = acpi_check_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+ sis630_driver.name);
+ if (retval)
+ goto exit;
+
/* Everything is happy, let's grab the memory and set things up. */
if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
sis630_driver.name)) {
@@ -458,7 +465,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis630_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_SIS630,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index dc235bb8e24..f1bba639664 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -1,7 +1,4 @@
/*
- sis96x.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
-
Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
This program is free software; you can redistribute it and/or modify
@@ -40,6 +37,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* base address register in PCI config space */
@@ -111,7 +109,7 @@ static int sis96x_transaction(int size)
/* check it again */
if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
- return -1;
+ return -EBUSY;
} else {
dev_dbg(&sis96x_adapter.dev, "Successful\n");
}
@@ -136,19 +134,19 @@ static int sis96x_transaction(int size)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
- result = -1;
+ result = -ETIMEDOUT;
}
/* device error - probably missing ACK */
if (temp & 0x02) {
dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
- result = -1;
+ result = -ENXIO;
}
/* bus collision */
if (temp & 0x04) {
dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
- result = -1;
+ result = -EIO;
}
/* Finish up by resetting the bus */
@@ -161,11 +159,12 @@ static int sis96x_transaction(int size)
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
{
+ int status;
switch (size) {
case I2C_SMBUS_QUICK:
@@ -200,20 +199,14 @@ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
SIS96x_PROC_CALL : SIS96x_WORD_DATA);
break;
- case I2C_SMBUS_BLOCK_DATA:
- /* TO DO: */
- dev_info(&adap->dev, "SMBus block not implemented!\n");
- return -1;
- break;
-
default:
- dev_info(&adap->dev, "Unsupported I2C size\n");
- return -1;
- break;
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
}
- if (sis96x_transaction(size))
- return -1;
+ status = sis96x_transaction(size);
+ if (status)
+ return status;
if ((size != SIS96x_PROC_CALL) &&
((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK)))
@@ -249,7 +242,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis96x_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_SIS96X,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
@@ -286,6 +279,10 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
sis96x_smbus_base);
+ retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
+ if (retval)
+ return retval;
+
/* Everything is happy, let's grab the memory and set things up. */
if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
sis96x_driver.name)) {
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index d08eeec5391..1b7b2af9403 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -43,7 +43,7 @@ struct stub_chip {
static struct stub_chip *stub_chips;
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data * data)
{
@@ -120,7 +120,7 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
default:
dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
- ret = -1;
+ ret = -EOPNOTSUPP;
break;
} /* switch (size) */
@@ -140,7 +140,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter stub_adapter = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
.name = "SMBus stub driver",
};
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index de9db49e54d..224aa12ee7c 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -96,9 +96,8 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
sprintf(p, "$%02X", command);
break;
default:
- dev_dbg(&adapter->dev, "Unsupported transaction size %d\n",
- size);
- return -EINVAL;
+ dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
}
/* Send the transaction to the TAOS EVM */
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 61716f6b14d..29cef0433f3 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -1,7 +1,4 @@
/*
- i2c-via.c - Part of lm_sensors, Linux kernel modules
- for hardware monitoring
-
i2c Support for Via Technologies 82C586B South Bridge
Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi>
@@ -87,7 +84,7 @@ static struct i2c_algo_bit_data bit_data = {
static struct i2c_adapter vt586b_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_B_VIA,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.name = "VIA i2c",
.algo_data = &bit_data,
};
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 77b13d027f8..862eb352a2d 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -1,6 +1,4 @@
/*
- i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
@@ -50,6 +48,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
static struct pci_dev *vt596_pdev;
@@ -152,7 +151,7 @@ static int vt596_transaction(u8 size)
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_err(&vt596_adapter.dev, "SMBus reset failed! "
"(0x%02x)\n", temp);
- return -1;
+ return -EBUSY;
}
}
@@ -167,24 +166,24 @@ static int vt596_transaction(u8 size)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
- result = -1;
+ result = -ETIMEDOUT;
dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
if (temp & 0x10) {
- result = -1;
+ result = -EIO;
dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
size);
}
if (temp & 0x08) {
- result = -1;
+ result = -EIO;
dev_err(&vt596_adapter.dev, "SMBus collision!\n");
}
if (temp & 0x04) {
int read = inb_p(SMBHSTADD) & 0x01;
- result = -1;
+ result = -ENXIO;
/* The quick and receive byte commands are used to probe
for chips, so errors are expected, and we don't want
to frighten the user. */
@@ -202,12 +201,13 @@ static int vt596_transaction(u8 size)
return result;
}
-/* Return -1 on error, 0 on success */
+/* Return negative errno on error, 0 on success */
static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
int i;
+ int status;
switch (size) {
case I2C_SMBUS_QUICK:
@@ -258,8 +258,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
- if (vt596_transaction(size)) /* Error in transaction */
- return -1;
+ status = vt596_transaction(size);
+ if (status)
+ return status;
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
return 0;
@@ -285,9 +286,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
return 0;
exit_unsupported:
- dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+ dev_warn(&vt596_adapter.dev, "Unsupported transaction %d\n",
size);
- return -1;
+ return -EOPNOTSUPP;
}
static u32 vt596_func(struct i2c_adapter *adapter)
@@ -309,7 +310,7 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter vt596_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_VIA2,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
@@ -354,6 +355,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
}
found:
+ error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
+ if (error)
+ return error;
+
if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
vt596_smba);
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 88a3447e11e..1d4ae26ba73 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -1,6 +1,4 @@
/*
- voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 61abe0f3325..ed794b145a1 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -442,7 +442,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
adapter->owner = THIS_MODULE;
adapter->id = I2C_HW_SMBUS_SCX200;
adapter->algo = &scx200_acb_algorithm;
- adapter->class = I2C_CLASS_HWMON;
+ adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adapter->dev.parent = dev;
mutex_init(&iface->mutex);