aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/chips/ds1374.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/chips/ds1374.c')
-rw-r--r--drivers/i2c/chips/ds1374.c260
1 files changed, 260 insertions, 0 deletions
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
new file mode 100644
index 00000000000..a445736d883
--- /dev/null
+++ b/drivers/i2c/chips/ds1374.c
@@ -0,0 +1,260 @@
+/*
+ * drivers/i2c/chips/ds1374.c
+ *
+ * I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock
+ *
+ * Author: Randy Vinson <rvinson@mvista.com>
+ *
+ * Based on the m41t00.c by Mark Greer <mgreer@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+/*
+ * This i2c client/driver wedges between the drivers/char/genrtc.c RTC
+ * interface and the SMBus interface of the i2c subsystem.
+ * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
+ * recommened in .../Documentation/i2c/writing-clients section
+ * "Sending and receiving", using SMBus level communication is preferred.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#define DS1374_REG_TOD0 0x00
+#define DS1374_REG_TOD1 0x01
+#define DS1374_REG_TOD2 0x02
+#define DS1374_REG_TOD3 0x03
+#define DS1374_REG_WDALM0 0x04
+#define DS1374_REG_WDALM1 0x05
+#define DS1374_REG_WDALM2 0x06
+#define DS1374_REG_CR 0x07
+#define DS1374_REG_SR 0x08
+#define DS1374_REG_SR_OSF 0x80
+#define DS1374_REG_TCR 0x09
+
+#define DS1374_DRV_NAME "ds1374"
+
+static DECLARE_MUTEX(ds1374_mutex);
+
+static struct i2c_driver ds1374_driver;
+static struct i2c_client *save_client;
+
+static unsigned short ignore[] = { I2C_CLIENT_END };
+static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
+
+static struct i2c_client_address_data addr_data = {
+ .normal_i2c = normal_addr,
+ .probe = ignore,
+ .ignore = ignore,
+ .force = ignore,
+};
+
+static ulong ds1374_read_rtc(void)
+{
+ ulong time = 0;
+ int reg = DS1374_REG_WDALM0;
+
+ while (reg--) {
+ s32 tmp;
+ if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) {
+ dev_warn(&save_client->dev,
+ "can't read from rtc chip\n");
+ return 0;
+ }
+ time = (time << 8) | (tmp & 0xff);
+ }
+ return time;
+}
+
+static void ds1374_write_rtc(ulong time)
+{
+ int reg;
+
+ for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) {
+ if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff)
+ < 0) {
+ dev_warn(&save_client->dev,
+ "can't write to rtc chip\n");
+ break;
+ }
+ time = time >> 8;
+ }
+}
+
+static void ds1374_check_rtc_status(void)
+{
+ s32 tmp;
+
+ tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR);
+ if (tmp < 0) {
+ dev_warn(&save_client->dev,
+ "can't read status from rtc chip\n");
+ return;
+ }
+ if (tmp & DS1374_REG_SR_OSF) {
+ dev_warn(&save_client->dev,
+ "oscillator discontinuity flagged, time unreliable\n");
+ tmp &= ~DS1374_REG_SR_OSF;
+ tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR,
+ tmp & 0xff);
+ if (tmp < 0)
+ dev_warn(&save_client->dev,
+ "can't clear discontinuity notification\n");
+ }
+}
+
+ulong ds1374_get_rtc_time(void)
+{
+ ulong t1, t2;
+ int limit = 10; /* arbitrary retry limit */
+
+ down(&ds1374_mutex);
+
+ /*
+ * Since the reads are being performed one byte at a time using
+ * the SMBus vs a 4-byte i2c transfer, there is a chance that a
+ * carry will occur during the read. To detect this, 2 reads are
+ * performed and compared.
+ */
+ do {
+ t1 = ds1374_read_rtc();
+ t2 = ds1374_read_rtc();
+ } while (t1 != t2 && limit--);
+
+ up(&ds1374_mutex);
+
+ if (t1 != t2) {
+ dev_warn(&save_client->dev,
+ "can't get consistent time from rtc chip\n");
+ t1 = 0;
+ }
+
+ return t1;
+}
+
+static void ds1374_set_tlet(ulong arg)
+{
+ ulong t1, t2;
+ int limit = 10; /* arbitrary retry limit */
+
+ t1 = *(ulong *) arg;
+
+ down(&ds1374_mutex);
+
+ /*
+ * Since the writes are being performed one byte at a time using
+ * the SMBus vs a 4-byte i2c transfer, there is a chance that a
+ * carry will occur during the write. To detect this, the write
+ * value is read back and compared.
+ */
+ do {
+ ds1374_write_rtc(t1);
+ t2 = ds1374_read_rtc();
+ } while (t1 != t2 && limit--);
+
+ up(&ds1374_mutex);
+
+ if (t1 != t2)
+ dev_warn(&save_client->dev,
+ "can't confirm time set from rtc chip\n");
+}
+
+ulong new_time;
+
+DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time);
+
+int ds1374_set_rtc_time(ulong nowtime)
+{
+ new_time = nowtime;
+
+ if (in_interrupt())
+ tasklet_schedule(&ds1374_tasklet);
+ else
+ ds1374_set_tlet((ulong) & new_time);
+
+ return 0;
+}
+
+/*
+ *****************************************************************************
+ *
+ * Driver Interface
+ *
+ *****************************************************************************
+ */
+static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
+{
+ struct i2c_client *client;
+ int rc;
+
+ client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!client)
+ return -ENOMEM;
+
+ memset(client, 0, sizeof(struct i2c_client));
+ strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
+ client->flags = I2C_DF_NOTIFY;
+ client->addr = addr;
+ client->adapter = adap;
+ client->driver = &ds1374_driver;
+
+ if ((rc = i2c_attach_client(client)) != 0) {
+ kfree(client);
+ return rc;
+ }
+
+ save_client = client;
+
+ ds1374_check_rtc_status();
+
+ return 0;
+}
+
+static int ds1374_attach(struct i2c_adapter *adap)
+{
+ return i2c_probe(adap, &addr_data, ds1374_probe);
+}
+
+static int ds1374_detach(struct i2c_client *client)
+{
+ int rc;
+
+ if ((rc = i2c_detach_client(client)) == 0) {
+ kfree(i2c_get_clientdata(client));
+ tasklet_kill(&ds1374_tasklet);
+ }
+ return rc;
+}
+
+static struct i2c_driver ds1374_driver = {
+ .owner = THIS_MODULE,
+ .name = DS1374_DRV_NAME,
+ .id = I2C_DRIVERID_DS1374,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = ds1374_attach,
+ .detach_client = ds1374_detach,
+};
+
+static int __init ds1374_init(void)
+{
+ return i2c_add_driver(&ds1374_driver);
+}
+
+static void __exit ds1374_exit(void)
+{
+ i2c_del_driver(&ds1374_driver);
+}
+
+module_init(ds1374_init);
+module_exit(ds1374_exit);
+
+MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver");
+MODULE_LICENSE("GPL");