aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/chips/w83l785ts.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/chips/w83l785ts.c')
-rw-r--r--drivers/i2c/chips/w83l785ts.c328
1 files changed, 0 insertions, 328 deletions
diff --git a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c
deleted file mode 100644
index 4469d52aba4..00000000000
--- a/drivers/i2c/chips/w83l785ts.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
- * monitoring
- * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
- *
- * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
- * by Winbond. It reports a single external temperature with a 1 deg
- * resolution and a 3 deg accuracy. Datasheet can be obtained from
- * Winbond's website at:
- * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
- *
- * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare
- * <khali@linux-fr.org>.
- *
- * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read
- * error handling mechanism.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-
-/* How many retries on register read error */
-#define MAX_RETRIES 5
-
-/*
- * Address to scan
- * Address is fully defined internally and cannot be changed.
- */
-
-static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-
-/*
- * Insmod parameters
- */
-
-SENSORS_INSMOD_1(w83l785ts);
-
-/*
- * The W83L785TS-S registers
- * Manufacturer ID is 0x5CA3 for Winbond.
- */
-
-#define W83L785TS_REG_MAN_ID1 0x4D
-#define W83L785TS_REG_MAN_ID2 0x4C
-#define W83L785TS_REG_CHIP_ID 0x4E
-#define W83L785TS_REG_CONFIG 0x40
-#define W83L785TS_REG_TYPE 0x52
-#define W83L785TS_REG_TEMP 0x27
-#define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */
-
-/*
- * Conversions
- * The W83L785TS-S uses signed 8-bit values.
- */
-
-#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000)
-
-/*
- * Functions declaration
- */
-
-static int w83l785ts_attach_adapter(struct i2c_adapter *adapter);
-static int w83l785ts_detect(struct i2c_adapter *adapter, int address,
- int kind);
-static int w83l785ts_detach_client(struct i2c_client *client);
-static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
-static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
-
-/*
- * Driver data (common to all clients)
- */
-
-static struct i2c_driver w83l785ts_driver = {
- .owner = THIS_MODULE,
- .name = "w83l785ts",
- .id = I2C_DRIVERID_W83L785TS,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = w83l785ts_attach_adapter,
- .detach_client = w83l785ts_detach_client,
-};
-
-/*
- * Client data (each client gets its own)
- */
-
-struct w83l785ts_data {
- struct i2c_client client;
- struct semaphore update_lock;
- char valid; /* zero until following fields are valid */
- unsigned long last_updated; /* in jiffies */
-
- /* registers values */
- u8 temp, temp_over;
-};
-
-/*
- * Sysfs stuff
- */
-
-static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83l785ts_data *data = w83l785ts_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
-}
-
-static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83l785ts_data *data = w83l785ts_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
-}
-
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
-static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL);
-
-/*
- * Real code
- */
-
-static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_detect(adapter, &addr_data, w83l785ts_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct w83l785ts_data *data;
- int err = 0;
-
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
- memset(data, 0, sizeof(struct w83l785ts_data));
-
-
- /* The common I2C client data is placed right before the
- * W83L785TS-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &w83l785ts_driver;
- new_client->flags = 0;
-
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip (actually there is only
- * one possible kind of chip for now, W83L785TS-S). A zero kind means
- * that the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- if (((w83l785ts_read_value(new_client,
- W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00)
- || ((w83l785ts_read_value(new_client,
- W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
- dev_dbg(&adapter->dev,
- "W83L785TS-S detection failed at 0x%02x.\n",
- address);
- goto exit_free;
- }
- }
-
- if (kind <= 0) { /* identification */
- u16 man_id;
- u8 chip_id;
-
- man_id = (w83l785ts_read_value(new_client,
- W83L785TS_REG_MAN_ID1, 0) << 8) +
- w83l785ts_read_value(new_client,
- W83L785TS_REG_MAN_ID2, 0);
- chip_id = w83l785ts_read_value(new_client,
- W83L785TS_REG_CHIP_ID, 0);
-
- if (man_id == 0x5CA3) { /* Winbond */
- if (chip_id == 0x70) { /* W83L785TS-S */
- kind = w83l785ts;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%04X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
- }
- }
-
- /* We can fill in the remaining client fields. */
- strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE);
- data->valid = 0;
- init_MUTEX(&data->update_lock);
-
- /* Default values in case the first read fails (unlikely). */
- data->temp_over = data->temp = 0;
-
- /* Tell the I2C layer a new client has arrived. */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
- /*
- * Initialize the W83L785TS chip
- * Nothing yet, assume it is already started.
- */
-
- /* Register sysfs hooks */
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
-
- return 0;
-
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static int w83l785ts_detach_client(struct i2c_client *client)
-{
- int err;
-
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
-
- kfree(i2c_get_clientdata(client));
- return 0;
-}
-
-static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
-{
- int value, i;
-
- /* Frequent read errors have been reported on Asus boards, so we
- * retry on read errors. If it still fails (unlikely), return the
- * default value requested by the caller. */
- for (i = 1; i <= MAX_RETRIES; i++) {
- value = i2c_smbus_read_byte_data(client, reg);
- if (value >= 0) {
- dev_dbg(&client->dev, "Read 0x%02x from register "
- "0x%02x.\n", value, reg);
- return value;
- }
- dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i);
- msleep(i);
- }
-
- dev_err(&client->dev, "Couldn't read value from register 0x%02x. "
- "Please report.\n", reg);
- return defval;
-}
-
-static struct w83l785ts_data *w83l785ts_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83l785ts_data *data = i2c_get_clientdata(client);
-
- down(&data->update_lock);
-
- if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
- dev_dbg(&client->dev, "Updating w83l785ts data.\n");
- data->temp = w83l785ts_read_value(client,
- W83L785TS_REG_TEMP, data->temp);
- data->temp_over = w83l785ts_read_value(client,
- W83L785TS_REG_TEMP_OVER, data->temp_over);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- up(&data->update_lock);
-
- return data;
-}
-
-static int __init sensors_w83l785ts_init(void)
-{
- return i2c_add_driver(&w83l785ts_driver);
-}
-
-static void __exit sensors_w83l785ts_exit(void)
-{
- i2c_del_driver(&w83l785ts_driver);
-}
-
-MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
-MODULE_DESCRIPTION("W83L785TS-S driver");
-MODULE_LICENSE("GPL");
-
-module_init(sensors_w83l785ts_init);
-module_exit(sensors_w83l785ts_exit);