diff options
Diffstat (limited to 'drivers/i2c/chips')
| -rw-r--r-- | drivers/i2c/chips/Kconfig | 402 | ||||
| -rw-r--r-- | drivers/i2c/chips/Makefile | 38 |
2 files changed, 3 insertions, 437 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index fddfc11b297..43f70dbfc03 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,410 +1,12 @@ # -# I2C Sensor and "other" chip configuration +# Miscellaneous I2C chip drivers configuration # -menu "Hardware Sensors Chip support" - depends on I2C - config I2C_SENSOR tristate default n -config SENSORS_ADM1021 - tristate "Analog Devices ADM1021 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1021 - and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, - and the XEON processor built-in sensor. - - This driver can also be built as a module. If so, the module - will be called adm1021. - -config SENSORS_ADM1025 - tristate "Analog Devices ADM1025 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1025 - and Philips NE1619 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm1025. - -config SENSORS_ADM1026 - tristate "Analog Devices ADM1026 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1026 - sensor chip. - - This driver can also be built as a module. If so, the module - will be called adm1026. - -config SENSORS_ADM1031 - tristate "Analog Devices ADM1031 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1031 - and ADM1030 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm1031. - -config SENSORS_ADM9240 - tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM9240, - Dallas DS1780, National Semiconductor LM81 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm9240. - -config SENSORS_ASB100 - tristate "Asus ASB100 Bach" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the ASB100 Bach sensor - chip found on some Asus mainboards. - - This driver can also be built as a module. If so, the module - will be called asb100. - -config SENSORS_ATXP1 - tristate "Attansic ATXP1 VID controller" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the Attansic ATXP1 VID - controller. - - If your board have such a chip, you are able to control your CPU - core and other voltages. - - This driver can also be built as a module. If so, the module - will be called atxp1. - -config SENSORS_DS1621 - tristate "Dallas Semiconductor DS1621 and DS1625" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Dallas Semiconductor - DS1621 and DS1625 sensor chips. - - This driver can also be built as a module. If so, the module - will be called ds1621. - -config SENSORS_FSCHER - tristate "FSC Hermes" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Fujitsu Siemens - Computers Hermes sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscher. - -config SENSORS_FSCPOS - tristate "FSC Poseidon" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Fujitsu Siemens - Computers Poseidon sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscpos. - -config SENSORS_GL518SM - tristate "Genesys Logic GL518SM" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for Genesys Logic GL518SM - sensor chips. - - This driver can also be built as a module. If so, the module - will be called gl518sm. - -config SENSORS_GL520SM - tristate "Genesys Logic GL520SM" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Genesys Logic GL520SM - sensor chips. - - This driver can also be built as a module. If so, the module - will be called gl520sm. - -config SENSORS_IT87 - tristate "ITE IT87xx and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for ITE IT87xx sensor chips - and clones: SiS960. - - This driver can also be built as a module. If so, the module - will be called it87. - -config SENSORS_LM63 - tristate "National Semiconductor LM63" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the National Semiconductor - LM63 remote diode digital temperature sensor with integrated fan - control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) - motherboard, among others. - - This driver can also be built as a module. If so, the module - will be called lm63. - -config SENSORS_LM75 - tristate "National Semiconductor LM75 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. - - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. - - This driver can also be built as a module. If so, the module - will be called lm75. - -config SENSORS_LM77 - tristate "National Semiconductor LM77" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM77 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm77. - -config SENSORS_LM78 - tristate "National Semiconductor LM78 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM78, - LM78-J and LM79. - - This driver can also be built as a module. If so, the module - will be called lm78. - -config SENSORS_LM80 - tristate "National Semiconductor LM80" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor - LM80 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm80. - -config SENSORS_LM83 - tristate "National Semiconductor LM83" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor - LM83 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm83. - -config SENSORS_LM85 - tristate "National Semiconductor LM85 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM85 - sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. - - This driver can also be built as a module. If so, the module - will be called lm85. - -config SENSORS_LM87 - tristate "National Semiconductor LM87" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM87 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm87. - -config SENSORS_LM90 - tristate "National Semiconductor LM90 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and - MAX6658 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. - - This driver can also be built as a module. If so, the module - will be called lm90. - -config SENSORS_LM92 - tristate "National Semiconductor LM92 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM92 - and Maxim MAX6635 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm92. - -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for MAX1619 sensor chip. - - This driver can also be built as a module. If so, the module - will be called max1619. - -config SENSORS_PC87360 - tristate "National Semiconductor PC87360 family" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC8736x Super-I/O chips. - The PC87360, PC87363 and PC87364 only have fan monitoring and - control. The PC87365 and PC87366 additionally have voltage and - temperature monitoring. - - This driver can also be built as a module. If so, the module - will be called pc87360. - -config SENSORS_SMSC47B397 - tristate "SMSC LPC47B397-NC" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the SMSC LPC47B397-NC - sensor chip. - - This driver can also be built as a module. If so, the module - will be called smsc47b397. - -config SENSORS_SIS5595 - tristate "Silicon Integrated Systems Corp. SiS5595" - depends on I2C && PCI && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated sensors in - SiS5595 South Bridges. - - This driver can also be built as a module. If so, the module - will be called sis5595. - -config SENSORS_SMSC47M1 - tristate "SMSC LPC47M10x and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated fan - monitoring and control capabilities of the SMSC LPC47B27x, - LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips. - - This driver can also be built as a module. If so, the module - will be called smsc47m1. - -config SENSORS_VIA686A - tristate "VIA686A" - depends on I2C && PCI - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated sensors in - Via 686A/B South Bridges. - - This driver can also be built as a module. If so, the module - will be called via686a. - -config SENSORS_W83781D - tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for the Winbond W8378x series - of sensor chips: the W83781D, W83782D, W83783S and W83627HF, - and the similar Asus AS99127F. - - This driver can also be built as a module. If so, the module - will be called w83781d. - -config SENSORS_W83L785TS - tristate "Winbond W83L785TS-S" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the Winbond W83L785TS-S - sensor chip, which is used on the Asus A7N8X, among other - motherboards. - - This driver can also be built as a module. If so, the module - will be called w83l785ts. - -config SENSORS_W83627HF - tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the Winbond W836X7 series - of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF - - This driver can also be built as a module. If so, the module - will be called w83627hf. - -config SENSORS_W83627EHF - tristate "Winbond W83627EHF" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get preliminary support for the hardware - monitoring functionality of the Winbond W83627EHF Super-I/O chip. - Only fan and temperature inputs are supported at the moment, while - the chip does much more than that. - - This driver can also be built as a module. If so, the module - will be called w83627ehf. - -endmenu - -menu "Other I2C Chip support" +menu "Miscellaneous I2C Chip support" depends on I2C config SENSORS_DS1337 diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index b5e6d2f84f9..a876dd42b86 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,52 +1,16 @@ # -# Makefile for sensor and "other" I2C chip drivers. +# Makefile for miscellaneous I2C chip drivers. # -# asb100, then w83781d go first, as they can override other drivers' addresses. -obj-$(CONFIG_SENSORS_ASB100) += asb100.o -obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o -obj-$(CONFIG_SENSORS_W83781D) += w83781d.o - -obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o -obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o -obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o -obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o -obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o -obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_DS1337) += ds1337.o obj-$(CONFIG_SENSORS_DS1374) += ds1374.o -obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o -obj-$(CONFIG_SENSORS_FSCHER) += fscher.o -obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o -obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o -obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o -obj-$(CONFIG_SENSORS_IT87) += it87.o -obj-$(CONFIG_SENSORS_LM63) += lm63.o -obj-$(CONFIG_SENSORS_LM75) += lm75.o -obj-$(CONFIG_SENSORS_LM77) += lm77.o -obj-$(CONFIG_SENSORS_LM78) += lm78.o -obj-$(CONFIG_SENSORS_LM80) += lm80.o -obj-$(CONFIG_SENSORS_LM83) += lm83.o -obj-$(CONFIG_SENSORS_LM85) += lm85.o -obj-$(CONFIG_SENSORS_LM87) += lm87.o -obj-$(CONFIG_SENSORS_LM90) += lm90.o -obj-$(CONFIG_SENSORS_LM92) += lm92.o -obj-$(CONFIG_SENSORS_MAX1619) += max1619.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_M41T00) += m41t00.o -obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o -obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o -obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o -obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o -obj-$(CONFIG_SENSORS_VIA686A) += via686a.o -obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o -obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o |