aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig18
-rw-r--r--drivers/i2c/Makefile1
-rw-r--r--drivers/i2c/algos/Kconfig8
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c286
-rw-r--r--drivers/i2c/algos/i2c-algo-sgi.c9
-rw-r--r--drivers/i2c/busses/Kconfig151
-rw-r--r--drivers/i2c/busses/Makefile4
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c2
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c2
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c2
-rw-r--r--drivers/i2c/busses/i2c-at91.c1
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c644
-rw-r--r--drivers/i2c/busses/i2c-elektor.c51
-rw-r--r--drivers/i2c/busses/i2c-gpio.c215
-rw-r--r--drivers/i2c/busses/i2c-i801.c2
-rw-r--r--drivers/i2c/busses/i2c-isa.c43
-rw-r--r--drivers/i2c/busses/i2c-ixp2000.c2
-rw-r--r--drivers/i2c/busses/i2c-ixp4xx.c2
-rw-r--r--drivers/i2c/busses/i2c-mpc.c1
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c2
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c6
-rw-r--r--drivers/i2c/busses/i2c-omap.c3
-rw-r--r--drivers/i2c/busses/i2c-parport-light.c144
-rw-r--r--drivers/i2c/busses/i2c-parport.c25
-rw-r--r--drivers/i2c/busses/i2c-pasemi.c2
-rw-r--r--drivers/i2c/busses/i2c-pca-isa.c36
-rw-r--r--drivers/i2c/busses/i2c-piix4.c2
-rw-r--r--drivers/i2c/busses/i2c-pxa.c33
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c96
-rw-r--r--drivers/i2c/busses/i2c-simtec.c186
-rw-r--r--drivers/i2c/busses/i2c-sis96x.c2
-rw-r--r--drivers/i2c/busses/i2c-tiny-usb.c277
-rw-r--r--drivers/i2c/busses/i2c-viapro.c2
-rw-r--r--drivers/i2c/busses/scx200_acb.c3
-rw-r--r--drivers/i2c/chips/Kconfig21
-rw-r--r--drivers/i2c/chips/tps65010.c4
-rw-r--r--drivers/i2c/i2c-boardinfo.c90
-rw-r--r--drivers/i2c/i2c-core.c662
-rw-r--r--drivers/i2c/i2c-core.h31
39 files changed, 2529 insertions, 542 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 11935f66fcd..434a61b415a 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -2,9 +2,7 @@
# I2C subsystem configuration
#
-menu "I2C support"
-
-config I2C
+menuconfig I2C
tristate "I2C support"
---help---
I2C (pronounce: I-square-C) is a slow serial bus protocol used in
@@ -22,9 +20,14 @@ config I2C
This I2C support can also be built as a module. If so, the module
will be called i2c-core.
+if I2C
+
+config I2C_BOARDINFO
+ boolean
+ default y
+
config I2C_CHARDEV
tristate "I2C device interface"
- depends on I2C
help
Say Y here to use i2c-* device files, usually found in the /dev
directory on your system. They make it possible to have user-space
@@ -40,7 +43,6 @@ source drivers/i2c/chips/Kconfig
config I2C_DEBUG_CORE
bool "I2C Core debugging messages"
- depends on I2C
help
Say Y here if you want the I2C core to produce a bunch of debug
messages to the system log. Select this if you are having a
@@ -48,7 +50,6 @@ config I2C_DEBUG_CORE
config I2C_DEBUG_ALGO
bool "I2C Algorithm debugging messages"
- depends on I2C
help
Say Y here if you want the I2C algorithm drivers to produce a bunch
of debug messages to the system log. Select this if you are having
@@ -57,7 +58,6 @@ config I2C_DEBUG_ALGO
config I2C_DEBUG_BUS
bool "I2C Bus debugging messages"
- depends on I2C
help
Say Y here if you want the I2C bus drivers to produce a bunch of
debug messages to the system log. Select this if you are having
@@ -66,12 +66,10 @@ config I2C_DEBUG_BUS
config I2C_DEBUG_CHIP
bool "I2C Chip debugging messages"
- depends on I2C
help
Say Y here if you want the I2C chip drivers to produce a bunch of
debug messages to the system log. Select this if you are having
a problem with I2C support and want to see more of what is going
on.
-endmenu
-
+endif # I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 71c5a854ac5..ba26e6cbe74 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -2,6 +2,7 @@
# Makefile for the i2c core.
#
+obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-y += busses/ chips/ algos/
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index af0203409dd..58899078810 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -3,11 +3,9 @@
#
menu "I2C Algorithms"
- depends on I2C
config I2C_ALGOBIT
tristate "I2C bit-banging interfaces"
- depends on I2C
help
This allows you to use a range of I2C adapters called bit-banging
adapters. Say Y if you own an I2C adapter belonging to this class
@@ -18,7 +16,6 @@ config I2C_ALGOBIT
config I2C_ALGOPCF
tristate "I2C PCF 8584 interfaces"
- depends on I2C
help
This allows you to use a range of I2C adapters called PCF adapters.
Say Y if you own an I2C adapter belonging to this class and then say
@@ -29,7 +26,6 @@ config I2C_ALGOPCF
config I2C_ALGOPCA
tristate "I2C PCA 9564 interfaces"
- depends on I2C
help
This allows you to use a range of I2C adapters called PCA adapters.
Say Y if you own an I2C adapter belonging to this class and then say
@@ -40,11 +36,11 @@ config I2C_ALGOPCA
config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
- depends on 8xx && I2C
+ depends on 8xx
config I2C_ALGO_SGI
tristate "I2C SGI interfaces"
- depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
+ depends on SGI_IP22 || SGI_IP32 || X86_VISWS
help
Supports the SGI interfaces like the ones found on SGI Indy VINO
or SGI O2 MACE.
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 95aa5395a5b..8a5f5825bb7 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -33,19 +33,30 @@
/* ----- global defines ----------------------------------------------- */
-#define DEB(x) if (i2c_debug>=1) x;
-#define DEB2(x) if (i2c_debug>=2) x;
-#define DEBSTAT(x) if (i2c_debug>=3) x; /* print several statistical values*/
-#define DEBPROTO(x) if (i2c_debug>=9) { x; }
- /* debug the protocol by showing transferred bits */
+#ifdef DEBUG
+#define bit_dbg(level, dev, format, args...) \
+ do { \
+ if (i2c_debug >= level) \
+ dev_dbg(dev, format, ##args); \
+ } while (0)
+#else
+#define bit_dbg(level, dev, format, args...) \
+ do {} while (0)
+#endif /* DEBUG */
/* ----- global variables --------------------------------------------- */
-/* module parameters:
- */
-static int i2c_debug;
static int bit_test; /* see if the line-setting functions work */
+module_param(bit_test, bool, 0);
+MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
+
+#ifdef DEBUG
+static int i2c_debug = 1;
+module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(i2c_debug,
+ "debug level - 0 off; 1 normal; 2 verbose; 3 very verbose");
+#endif
/* --- setting states on the bus with the right timing: --------------- */
@@ -57,19 +68,19 @@ static int bit_test; /* see if the line-setting functions work */
static inline void sdalo(struct i2c_algo_bit_data *adap)
{
setsda(adap,0);
- udelay(adap->udelay);
+ udelay((adap->udelay + 1) / 2);
}
static inline void sdahi(struct i2c_algo_bit_data *adap)
{
setsda(adap,1);
- udelay(adap->udelay);
+ udelay((adap->udelay + 1) / 2);
}
static inline void scllo(struct i2c_algo_bit_data *adap)
{
setscl(adap,0);
- udelay(adap->udelay);
+ udelay(adap->udelay / 2);
}
/*
@@ -98,7 +109,11 @@ static int sclhi(struct i2c_algo_bit_data *adap)
}
cond_resched();
}
- DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start));
+#ifdef DEBUG
+ if (jiffies != start && i2c_debug >= 3)
+ pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go "
+ "high\n", jiffies - start);
+#endif
done:
udelay(adap->udelay);
@@ -110,30 +125,29 @@ done:
static void i2c_start(struct i2c_algo_bit_data *adap)
{
/* assert: scl, sda are high */
- DEBPROTO(printk("S "));
- sdalo(adap);
+ setsda(adap, 0);
+ udelay(adap->udelay);
scllo(adap);
}
static void i2c_repstart(struct i2c_algo_bit_data *adap)
{
- /* scl, sda may not be high */
- DEBPROTO(printk(" Sr "));
- setsda(adap,1);
+ /* assert: scl is low */
+ sdahi(adap);
sclhi(adap);
-
- sdalo(adap);
+ setsda(adap, 0);
+ udelay(adap->udelay);
scllo(adap);
}
static void i2c_stop(struct i2c_algo_bit_data *adap)
{
- DEBPROTO(printk("P\n"));
/* assert: scl is low */
sdalo(adap);
sclhi(adap);
- sdahi(adap);
+ setsda(adap, 1);
+ udelay(adap->udelay);
}
@@ -145,7 +159,7 @@ static void i2c_stop(struct i2c_algo_bit_data *adap)
* 0 if the device did not ack
* -ETIMEDOUT if an error occurred (while raising the scl line)
*/
-static int i2c_outb(struct i2c_adapter *i2c_adap, char c)
+static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c)
{
int i;
int sb;
@@ -154,34 +168,32 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, char c)
/* assert: scl is low */
for ( i=7 ; i>=0 ; i-- ) {
- sb = c & ( 1 << i );
+ sb = (c >> i) & 1;
setsda(adap,sb);
- udelay(adap->udelay);
- DEBPROTO(printk(KERN_DEBUG "%d",sb!=0));
+ udelay((adap->udelay + 1) / 2);
if (sclhi(adap)<0) { /* timed out */
- sdahi(adap); /* we don't want to block the net */
- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at bit #%d\n", c&0xff, i));
+ bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
+ "timeout at bit #%d\n", (int)c, i);
return -ETIMEDOUT;
};
/* do arbitration here:
* if ( sb && ! getsda(adap) ) -> ouch! Get out of here.
*/
- setscl(adap, 0 );
- udelay(adap->udelay);
+ scllo(adap);
}
sdahi(adap);
if (sclhi(adap)<0){ /* timeout */
- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at ack\n", c&0xff));
- return -ETIMEDOUT;
+ bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
+ "timeout at ack\n", (int)c);
+ return -ETIMEDOUT;
};
/* read ack: SDA should be pulled down by slave */
- ack=getsda(adap); /* ack: sda is pulled low ->success. */
- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x , getsda() = %d\n", c & 0xff, ack));
+ ack = !getsda(adap); /* ack: sda is pulled low -> success */
+ bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c,
+ ack ? "A" : "NA");
- DEBPROTO( printk(KERN_DEBUG "[%2.2x]",c&0xff) );
- DEBPROTO(if (0==ack){ printk(KERN_DEBUG " A ");} else printk(KERN_DEBUG " NA ") );
scllo(adap);
- return 0==ack; /* return 1 if device acked */
+ return ack;
/* assert: scl is low (sda undef) */
}
@@ -198,19 +210,18 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
sdahi(adap);
for (i=0;i<8;i++) {
if (sclhi(adap)<0) { /* timeout */
- DEB2(printk(KERN_DEBUG " i2c_inb: timeout at bit #%d\n", 7-i));
+ bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit "
+ "#%d\n", 7 - i);
return -ETIMEDOUT;
};
indata *= 2;
if ( getsda(adap) )
indata |= 0x01;
- scllo(adap);
+ setscl(adap, 0);
+ udelay(i == 7 ? adap->udelay / 2 : adap->udelay);
}
/* assert: scl is low */
- DEB2(printk(KERN_DEBUG "i2c_inb: 0x%02x\n", indata & 0xff));
-
- DEBPROTO(printk(KERN_DEBUG " 0x%02x", indata & 0xff));
- return (int) (indata & 0xff);
+ return indata;
}
/*
@@ -221,73 +232,67 @@ static int test_bus(struct i2c_algo_bit_data *adap, char* name) {
int scl,sda;
if (adap->getscl==NULL)
- printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, "
- "SCL is not readable.\n");
+ pr_info("%s: Testing SDA only, SCL is not readable\n", name);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda);
if (!scl || !sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name);
+ printk(KERN_WARNING "%s: bus seems to be busy\n", name);
goto bailout;
}
sdalo(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda);
if ( 0 != sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n");
+ printk(KERN_WARNING "%s: SDA stuck high!\n", name);
goto bailout;
}
if ( 0 == scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
- "while pulling SDA low!\n");
+ printk(KERN_WARNING "%s: SCL unexpected low "
+ "while pulling SDA low!\n", name);
goto bailout;
}
sdahi(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda);
if ( 0 == sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n");
+ printk(KERN_WARNING "%s: SDA stuck low!\n", name);
goto bailout;
}
if ( 0 == scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
- "while pulling SDA high!\n");
+ printk(KERN_WARNING "%s: SCL unexpected low "
+ "while pulling SDA high!\n", name);
goto bailout;
}
scllo(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?0:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda);
if ( 0 != scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n");
+ printk(KERN_WARNING "%s: SCL stuck high!\n", name);
goto bailout;
}
if ( 0 == sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
- "while pulling SCL low!\n");
+ printk(KERN_WARNING "%s: SDA unexpected low "
+ "while pulling SCL low!\n", name);
goto bailout;
}
sclhi(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda);
if ( 0 == scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n");
+ printk(KERN_WARNING "%s: SCL stuck low!\n", name);
goto bailout;
}
if ( 0 == sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
- "while pulling SCL high!\n");
+ printk(KERN_WARNING "%s: SDA unexpected low "
+ "while pulling SCL high!\n", name);
goto bailout;
}
- printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name);
+ pr_info("%s: Test OK\n", name);
return 0;
bailout:
sdahi(adap);
@@ -312,44 +317,39 @@ static int try_address(struct i2c_adapter *i2c_adap,
int i,ret = -1;
for (i=0;i<=retries;i++) {
ret = i2c_outb(i2c_adap,addr);
- if (ret==1)
- break; /* success! */
- i2c_stop(adap);
- udelay(5/*adap->udelay*/);
- if (i==retries) /* no success */
+ if (ret == 1 || i == retries)
break;
- i2c_start(adap);
+ bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
+ i2c_stop(adap);
udelay(adap->udelay);
+ yield();
+ bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
+ i2c_start(adap);
}
- DEB2(if (i)
- printk(KERN_DEBUG "i2c-algo-bit.o: Used %d tries to %s client at 0x%02x : %s\n",
- i+1, addr & 1 ? "read" : "write", addr>>1,
- ret==1 ? "success" : ret==0 ? "no ack" : "failed, timeout?" )
- );
+ if (i && ret)
+ bit_dbg(1, &i2c_adap->dev, "Used %d tries to %s client at "
+ "0x%02x: %s\n", i + 1,
+ addr & 1 ? "read from" : "write to", addr >> 1,
+ ret == 1 ? "success" : "failed, timeout?");
return ret;
}
static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
{
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
- char c;
- const char *temp = msg->buf;
+ const unsigned char *temp = msg->buf;
int count = msg->len;
unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
int retval;
int wrcount=0;
while (count > 0) {
- c = *temp;
- DEB2(dev_dbg(&i2c_adap->dev, "sendbytes: writing %2.2X\n", c&0xff));
- retval = i2c_outb(i2c_adap,c);
+ retval = i2c_outb(i2c_adap, *temp);
if ((retval>0) || (nak_ok && (retval==0))) { /* ok or ignored NAK */
count--;
temp++;
wrcount++;
} else { /* arbitration or no acknowledge */
dev_err(&i2c_adap->dev, "sendbytes: error - bailout.\n");
- i2c_stop(adap);
return (retval<0)? retval : -EFAULT;
/* got a better one ?? */
}
@@ -362,7 +362,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
int inval;
int rdcount=0; /* counts bytes read */
struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
- char *temp = msg->buf;
+ unsigned char *temp = msg->buf;
int count = msg->len;
while (count > 0) {
@@ -371,30 +371,44 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
*temp = inval;
rdcount++;
} else { /* read timed out */
- printk(KERN_ERR "i2c-algo-bit.o: readbytes: i2c_inb timed out.\n");
break;
}
temp++;
count--;
- if (msg->flags & I2C_M_NO_RD_ACK)
+ if (msg->flags & I2C_M_NO_RD_ACK) {
+ bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x\n",
+ inval);
continue;
-
- if ( count > 0 ) { /* send ack */
- sdalo(adap);
- DEBPROTO(printk(" Am "));
- } else {
- sdahi(adap); /* neg. ack on last byte */
- DEBPROTO(printk(" NAm "));
}
+
+ /* assert: sda is high */
+ if (count) /* send ack */
+ setsda(adap, 0);
+ udelay((adap->udelay + 1) / 2);
+ bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x %s\n", inval,
+ count ? "A" : "NA");
if (sclhi(adap)<0) { /* timeout */
- sdahi(adap);
- printk(KERN_ERR "i2c-algo-bit.o: readbytes: Timeout at ack\n");
+ dev_err(&i2c_adap->dev, "readbytes: timeout at ack\n");
return -ETIMEDOUT;
};
scllo(adap);
- sdahi(adap);
+
+ /* Some SMBus transactions require that we receive the
+ transaction length as the first read byte. */
+ if (rdcount == 1 && (msg->flags & I2C_M_RECV_LEN)) {
+ if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&i2c_adap->dev, "readbytes: invalid "
+ "block length (%d)\n", inval);
+ return -EREMOTEIO;
+ }
+ /* The original count value accounts for the extra
+ bytes, that is, either 1 for a regular transaction,
+ or 2 for a PEC transaction. */
+ count += inval;
+ msg->len += inval;
+ }
}
return rdcount;
}
@@ -421,27 +435,31 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
if ( (flags & I2C_M_TEN) ) {
/* a ten bit address */
addr = 0xf0 | (( msg->addr >> 7) & 0x03);
- DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
+ bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
/* try extended address code...*/
ret = try_address(i2c_adap, addr, retries);
if ((ret != 1) && !nak_ok) {
- printk(KERN_ERR "died at extended address code.\n");
+ dev_err(&i2c_adap->dev,
+ "died at extended address code\n");
return -EREMOTEIO;
}
/* the remaining 8 bit address */
ret = i2c_outb(i2c_adap,msg->addr & 0x7f);
if ((ret != 1) && !nak_ok) {
/* the chip did not ack / xmission error occurred */
- printk(KERN_ERR "died at 2nd address code.\n");
+ dev_err(&i2c_adap->dev, "died at 2nd address code\n");
return -EREMOTEIO;
}
if ( flags & I2C_M_RD ) {
+ bit_dbg(3, &i2c_adap->dev, "emitting repeated "
+ "start condition\n");
i2c_repstart(adap);
/* okay, now switch into reading mode */
addr |= 0x01;
ret = try_address(i2c_adap, addr, retries);
if ((ret!=1) && !nak_ok) {
- printk(KERN_ERR "died at extended address code.\n");
+ dev_err(&i2c_adap->dev,
+ "died at repeated address code\n");
return -EREMOTEIO;
}
}
@@ -468,44 +486,62 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
int i,ret;
unsigned short nak_ok;
+ bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
i2c_start(adap);
for (i=0;i<num;i++) {
pmsg = &msgs[i];
nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
if (!(pmsg->flags & I2C_M_NOSTART)) {
if (i) {
+ bit_dbg(3, &i2c_adap->dev, "emitting "
+ "repeated start condition\n");
i2c_repstart(adap);
}
ret = bit_doAddress(i2c_adap, pmsg);
if ((ret != 0) && !nak_ok) {
- DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: NAK from device addr %2.2x msg #%d\n"
- ,msgs[i].addr,i));
- return (ret<0) ? ret : -EREMOTEIO;
+ bit_dbg(1, &i2c_adap->dev, "NAK from "
+ "device addr 0x%02x msg #%d\n",
+ msgs[i].addr, i);
+ goto bailout;
}
}
if (pmsg->flags & I2C_M_RD ) {
/* read bytes into buffer*/
ret = readbytes(i2c_adap, pmsg);
- DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: read %d bytes.\n",ret));
- if (ret < pmsg->len ) {
- return (ret<0)? ret : -EREMOTEIO;
+ if (ret >= 1)
+ bit_dbg(2, &i2c_adap->dev, "read %d byte%s\n",
+ ret, ret == 1 ? "" : "s");
+ if (ret < pmsg->len) {
+ if (ret >= 0)
+ ret = -EREMOTEIO;
+ goto bailout;
}
} else {
/* write bytes from buffer */
ret = sendbytes(i2c_adap, pmsg);
- DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: wrote %d bytes.\n",ret));
- if (ret < pmsg->len ) {
- return (ret<0) ? ret : -EREMOTEIO;
+ if (ret >= 1)
+ bit_dbg(2, &i2c_adap->dev, "wrote %d byte%s\n",
+ ret, ret == 1 ? "" : "s");
+ if (ret < pmsg->len) {
+ if (ret >= 0)
+ ret = -EREMOTEIO;
+ goto bailout;
}
}
}
+ ret = i;
+
+bailout:
+ bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
i2c_stop(adap);
- return num;
+ return ret;
}
static u32 bit_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
}
@@ -520,7 +556,7 @@ static const struct i2c_algorithm i2c_bit_algo = {
/*
* registering functions to load algorithms at runtime
*/
-int i2c_bit_add_bus(struct i2c_adapter *adap)
+static int i2c_bit_prepare_bus(struct i2c_adapter *adap)
{
struct i2c_algo_bit_data *bit_adap = adap->algo_data;
@@ -530,25 +566,39 @@ int i2c_bit_add_bus(struct i2c_adapter *adap)
return -ENODEV;
}
- DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));
-
/* register new adapter to i2c module... */
adap->algo = &i2c_bit_algo;
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
+ return 0;
+}
+
+int i2c_bit_add_bus(struct i2c_adapter *adap)
+{
+ int err;
+
+ err = i2c_bit_prepare_bus(adap);
+ if (err)
+ return err;
+
return i2c_add_adapter(adap);
}
EXPORT_SYMBOL(i2c_bit_add_bus);
+int i2c_bit_add_numbered_bus(struct i2c_adapter *adap)
+{
+ int err;
+
+ err = i2c_bit_prepare_bus(adap);
+ if (err)
+ return err;
+
+ return i2c_add_numbered_adapter(adap);
+}
+EXPORT_SYMBOL(i2c_bit_add_numbered_bus);
+
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
MODULE_LICENSE("GPL");
-
-module_param(bit_test, bool, 0);
-module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
-
-MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
-MODULE_PARM_DESC(i2c_debug,
- "debug level - 0 off; 1 normal; 2,3 more verbose; 9 bit-protocol");
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
index ac2d5053078..6eaf145e1ad 100644
--- a/drivers/i2c/algos/i2c-algo-sgi.c
+++ b/drivers/i2c/algos/i2c-algo-sgi.c
@@ -1,6 +1,7 @@
/*
- * i2c-algo-sgi.c: i2c driver algorithms for SGI adapters.
- *
+ * i2c-algo-sgi.c: i2c driver algorithm used by the VINO (SGI Indy) and
+ * MACE (SGI O2) chips.
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License version 2 as published by the Free Software Foundation.
*
@@ -162,8 +163,8 @@ static const struct i2c_algorithm sgi_algo = {
.functionality = sgi_func,
};
-/*
- * registering functions to load algorithms at runtime
+/*
+ * registering functions to load algorithms at runtime
*/
int i2c_sgi_add_bus(struct i2c_adapter *adap)
{
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ece31d2c6c6..838dc1c19d6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -3,11 +3,10 @@
#
menu "I2C Hardware Bus support"
- depends on I2C
config I2C_ALI1535
tristate "ALI 1535"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
@@ -19,7 +18,7 @@ config I2C_ALI1535
config I2C_ALI1563
tristate "ALI 1563"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
@@ -31,7 +30,7 @@ config I2C_ALI1563
config I2C_ALI15X3
tristate "ALI 15x3"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -41,7 +40,7 @@ config I2C_ALI15X3
config I2C_AMD756
tristate "AMD 756/766/768/8111 and nVidia nForce"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the AMD
756/766/768 mainboard I2C interfaces. The driver also includes
@@ -66,7 +65,7 @@ config I2C_AMD756_S4882
config I2C_AMD8111
tristate "AMD 8111"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -76,14 +75,14 @@ config I2C_AMD8111
config I2C_AT91
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
- depends on I2C && ARCH_AT91 && EXPERIMENTAL
+ depends on ARCH_AT91 && EXPERIMENTAL
help
This supports the use of the I2C interface on Atmel AT91
processors.
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
- depends on I2C && (SOC_AU1550 || SOC_AU1200)
+ depends on SOC_AU1550 || SOC_AU1200
help
If you say yes to this option, support will be included for the
Au1550 and Au1200 SMBus interface.
@@ -91,9 +90,25 @@ config I2C_AU1550
This driver can also be built as a module. If so, the module
will be called i2c-au1550.
+config I2C_BLACKFIN_TWI
+ tristate "Blackfin TWI I2C support"
+ depends on BF534 || BF536 || BF537
+ help
+ This is the TWI I2C device driver for Blackfin 534/536/537.
+ This driver can also be built as a module. If so, the module
+ will be called i2c-bfin-twi.
+
+config I2C_BLACKFIN_TWI_CLK_KHZ
+ int "Blackfin TWI I2C clock (kHz)"
+ depends on I2C_BLACKFIN_TWI
+ range 10 400
+ default 50
+ help
+ The unit of the TWI clock is kHz.
+
config I2C_ELEKTOR
tristate "Elektor ISA card"
- depends on I2C && ISA && BROKEN_ON_SMP
+ depends on ISA && BROKEN_ON_SMP
select I2C_ALGOPCF
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
@@ -102,9 +117,17 @@ config I2C_ELEKTOR
This support is also available as a module. If so, the module
will be called i2c-elektor.
+config I2C_GPIO
+ tristate "GPIO-based bitbanging I2C"
+ depends on GENERIC_GPIO
+ select I2C_ALGOBIT
+ help
+ This is a very simple bitbanging I2C driver utilizing the
+ arch-neutral GPIO API to control the SCL and SDA lines.
+
config I2C_HYDRA
tristate "CHRP Apple Hydra Mac I/O I2C interface"
- depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
+ depends on PCI && PPC_CHRP && EXPERIMENTAL
select I2C_ALGOBIT
help
This supports the use of the I2C interface in the Apple Hydra Mac
@@ -116,7 +139,7 @@ config I2C_HYDRA
config I2C_I801
tristate "Intel 82801 (ICH)"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
@@ -139,7 +162,7 @@ config I2C_I801
config I2C_I810
tristate "Intel 810/815"
- depends on I2C && PCI
+ depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the Intel
@@ -156,7 +179,7 @@ config I2C_I810
config I2C_PXA
tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
- depends on I2C && EXPERIMENTAL && ARCH_PXA
+ depends on EXPERIMENTAL && ARCH_PXA
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
@@ -172,7 +195,7 @@ config I2C_PXA_SLAVE
config I2C_PIIX4
tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the Intel
PIIX4 family of mainboard I2C interfaces. Specifically, the following
@@ -195,7 +218,7 @@ config I2C_PIIX4
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
- depends on IBM_OCP && I2C
+ depends on IBM_OCP
help
Say Y here if you want to use IIC peripheral found on
embedded IBM PPC 4xx based systems.
@@ -205,7 +228,7 @@ config I2C_IBM_IIC
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
- depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX) && I2C
+ depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
help
Say Y here if you want to use the IIC bus controller on
the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
@@ -215,11 +238,10 @@ config I2C_IOP3XX
config I2C_ISA
tristate
- depends on I2C
config I2C_IXP4XX
- tristate "IXP4xx GPIO-Based I2C Interface"
- depends on I2C && ARCH_IXP4XX
+ tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)"
+ depends on ARCH_IXP4XX
select I2C_ALGOBIT
help
Say Y here if you have an Intel IXP4xx(420,421,422,425) based
@@ -228,9 +250,12 @@ config I2C_IXP4XX
This support is also available as a module. If so, the module
will be called i2c-ixp4xx.
+ This driver is deprecated and will be dropped soon. Use i2c-gpio
+ instead.
+
config I2C_IXP2000
- tristate "IXP2000 GPIO-Based I2C Interface"
- depends on I2C && ARCH_IXP2000
+ tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
+ depends on ARCH_IXP2000
select I2C_ALGOBIT
help
Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
@@ -239,9 +264,12 @@ config I2C_IXP2000
This support is also available as a module. If so, the module
will be called i2c-ixp2000.
+ This driver is deprecated and will be dropped soon. Use i2c-gpio
+ instead.
+
config I2C_POWERMAC
tristate "Powermac I2C interface"
- depends on I2C && PPC_PMAC
+ depends on PPC_PMAC
default y
help
This exposes the various PowerMac i2c interfaces to the linux i2c
@@ -253,7 +281,7 @@ config I2C_POWERMAC
config I2C_MPC
tristate "MPC107/824x/85xx/52xx/86xx"
- depends on I2C && PPC32
+ depends on PPC32
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
@@ -265,7 +293,7 @@ config I2C_MPC
config I2C_NFORCE2
tristate "Nvidia nForce2, nForce3 and nForce4"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the Nvidia
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@@ -275,7 +303,7 @@ config I2C_NFORCE2
config I2C_OCORES
tristate "OpenCores I2C Controller"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
@@ -286,7 +314,7 @@ config I2C_OCORES
config I2C_OMAP
tristate "OMAP I2C adapter"
- depends on I2C && ARCH_OMAP
+ depends on ARCH_OMAP
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
@@ -296,7 +324,7 @@ config I2C_OMAP
config I2C_PARPORT
tristate "Parallel port adapter"
- depends on I2C && PARPORT
+ depends on PARPORT
select I2C_ALGOBIT
help
This supports parallel port I2C adapters such as the ones made by
@@ -320,7 +348,6 @@ config I2C_PARPORT
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
- depends on I2C
select I2C_ALGOBIT
help
This supports parallel port I2C adapters such as the ones made by
@@ -344,13 +371,13 @@ config I2C_PARPORT_LIGHT
config I2C_PASEMI
tristate "PA Semi SMBus interface"
- depends on PPC_PASEMI && I2C && PCI
+ depends on PPC_PASEMI && PCI
help
Supports the PA Semi PWRficient on-chip SMBus interfaces.
config I2C_PROSAVAGE
tristate "S3/VIA (Pro)Savage"
- depends on I2C && PCI
+ depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
@@ -365,19 +392,19 @@ config I2C_PROSAVAGE
config I2C_RPXLITE
tristate "Embedded Planet RPX Lite/Classic support"
- depends on (RPXLITE || RPXCLASSIC) && I2C
+ depends on RPXLITE || RPXCLASSIC
select I2C_ALGO8XX
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on I2C && ARCH_S3C2410
+ depends on ARCH_S3C2410
help
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
config I2C_SAVAGE4
tristate "S3 Savage 4"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
@@ -388,13 +415,25 @@ config I2C_SAVAGE4
config I2C_SIBYTE
tristate "SiByte SMBus interface"
- depends on SIBYTE_SB1xxx_SOC && I2C
+ depends on SIBYTE_SB1xxx_SOC
help
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+config I2C_SIMTEC
+ tristate "Simtec Generic I2C interface"
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be inclyded for
+ the Simtec Generic I2C interface. This driver is for the
+ simple I2C bus used on newer Simtec products for general
+ I2C, such as DDC on the Simtec BBD2016A.
+
+ This driver can also be build as a module. If so, the module
+ will be called i2c-simtec.
+
config SCx200_I2C
- tristate "NatSemi SCx200 I2C using GPIO pins"
- depends on SCx200_GPIO && I2C
+ tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
+ depends on SCx200_GPIO
select I2C_ALGOBIT
help
Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
@@ -404,6 +443,9 @@ config SCx200_I2C
This support is also available as a module. If so, the module
will be called scx200_i2c.
+ This driver is deprecated and will be dropped soon. Use i2c-gpio
+ (or scx200_acb) instead.
+
config SCx200_I2C_SCL
int "GPIO pin used for SCL"
depends on SCx200_I2C
@@ -422,7 +464,7 @@ config SCx200_I2C_SDA
config SCx200_ACB
tristate "Geode ACCESS.bus support"
- depends on X86_32 && I2C && PCI
+ depends on X86_32 && PCI
help
Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
SC1100 processors and the CS5535 and CS5536 Geode companion devices.
@@ -434,7 +476,7 @@ config SCx200_ACB
config I2C_SIS5595
tristate "SiS 5595"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
@@ -444,7 +486,7 @@ config I2C_SIS5595
config I2C_SIS630
tristate "SiS 630/730"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
SiS630 and SiS730 SMBus (a subset of I2C) interface.
@@ -454,7 +496,7 @@ config I2C_SIS630
config I2C_SIS96X
tristate "SiS 96x"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the SiS
96x SMBus (a subset of I2C) interfaces. Specifically, the following
@@ -472,7 +514,7 @@ config I2C_SIS96X
config I2C_STUB
tristate "I2C/SMBus Test Stub"
- depends on I2C && EXPERIMENTAL && 'm'
+ depends on EXPERIMENTAL && m
default 'n'
help
This module may be useful to developers of SMBus client drivers,
@@ -483,9 +525,20 @@ config I2C_STUB
If you don't know what to do here, definitely say N.
+config I2C_TINY_USB
+ tristate "I2C-Tiny-USB"
+ depends on USB
+ help
+ If you say yes to this option, support will be included for the
+ i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
+ http://www.harbaum.org/till/i2c_tiny_usb for hardware details.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-tiny-usb.
+
config I2C_VERSATILE
tristate "ARM Versatile/Realview I2C bus support"
- depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW)
+ depends on ARCH_VERSATILE || ARCH_REALVIEW
select I2C_ALGOBIT
help
Say yes if you want to support the I2C serial bus on ARMs Versatile
@@ -496,7 +549,7 @@ config I2C_VERSATILE
config I2C_ACORN
bool "Acorn IOC/IOMD I2C bus support"
- depends on I2C && ARCH_ACORN
+ depends on ARCH_ACORN
default y
select I2C_ALGOBIT
help
@@ -506,7 +559,7 @@ config I2C_ACORN
config I2C_VIA
tristate "VIA 82C586B"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the VIA
@@ -517,7 +570,7 @@ config I2C_VIA
config I2C_VIAPRO
tristate "VIA VT82C596/82C686/82xx and CX700"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the VIA
VT82C596 and later SMBus interface. Specifically, the following
@@ -536,7 +589,7 @@ config I2C_VIAPRO
config I2C_VOODOO3
tristate "Voodoo 3"
- depends on I2C && PCI
+ depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
@@ -547,7 +600,7 @@ config I2C_VOODOO3
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
- depends on I2C
+ depends on ISA
select I2C_ALGOPCA
default n
help
@@ -564,7 +617,7 @@ config I2C_PCA_ISA
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on I2C && MV64X60 && EXPERIMENTAL
+ depends on MV64X60 && EXPERIMENTAL
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
@@ -574,7 +627,7 @@ config I2C_MV64XXX
config I2C_PNX
tristate "I2C bus support for Philips PNX targets"
- depends on ARCH_PNX4008 && I2C
+ depends on ARCH_PNX4008
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 290b5401835..14d1432f698 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -10,7 +10,9 @@ obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
+obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
+obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_I810) += i2c-i810.o
@@ -37,10 +39,12 @@ obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
+obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_VIA) += i2c-via.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 1e277ba5a9f..f14372ac2fc 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -497,7 +497,7 @@ static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_
/* set up the sysfs linkage to our parent device */
ali1535_adapter.dev.parent = &dev->dev;
- snprintf(ali1535_adapter.name, I2C_NAME_SIZE,
+ snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
"SMBus ALI1535 adapter at %04x", ali1535_smba);
return i2c_add_adapter(&ali1535_adapter);
}
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index e47fe01bf42..93bf87d7096 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -492,7 +492,7 @@ static int __devinit ali15x3_probe(struct pci_dev *dev, const struct pci_device_
/* set up the sysfs linkage to our parent device */
ali15x3_adapter.dev.parent = &dev->dev;
- snprintf(ali15x3_adapter.name, I2C_NAME_SIZE,
+ snprintf(ali15x3_adapter.name, sizeof(ali15x3_adapter.name),
"SMBus ALI15X3 adapter at %04x", ali15x3_smba);
return i2c_add_adapter(&ali15x3_adapter);
}
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 0c70f829334..c9fca7b4926 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -365,7 +365,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
}
smbus->adapter.owner = THIS_MODULE;
- snprintf(smbus->adapter.name, I2C_NAME_SIZE,
+ snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"SMBus2 AMD8111 adapter at %04x", smbus->base);
smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
smbus->adapter.class = I2C_CLASS_HWMON;
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 67f91bdda08..f35156c5892 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -17,7 +17,6 @@
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/pci.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/i2c.h>
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
new file mode 100644
index 00000000000..6311039dfe6
--- /dev/null
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -0,0 +1,644 @@
+/*
+ * drivers/i2c/busses/i2c-bfin-twi.c
+ *
+ * Description: Driver for Blackfin Two Wire Interface
+ *
+ * Author: sonicz <sonic.zhang@analog.com>
+ *
+ * Copyright (c) 2005-2007 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+#define POLL_TIMEOUT (2 * HZ)
+
+/* SMBus mode*/
+#define TWI_I2C_MODE_STANDARD 0x01
+#define TWI_I2C_MODE_STANDARDSUB 0x02
+#define TWI_I2C_MODE_COMBINED 0x04
+
+struct bfin_twi_iface {
+ struct mutex twi_lock;
+ int irq;
+ spinlock_t lock;
+ char read_write;
+ u8 command;
+ u8 *transPtr;
+ int readNum;
+ int writeNum;
+ int cur_mode;
+ int manual_stop;
+ int result;
+ int timeout_count;
+ struct timer_list timeout_timer;
+ struct i2c_adapter adap;
+ struct completion complete;
+};
+
+static struct bfin_twi_iface twi_iface;
+
+static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
+{
+ unsigned short twi_int_status = bfin_read_TWI_INT_STAT();
+ unsigned short mast_stat = bfin_read_TWI_MASTER_STAT();
+
+ if (twi_int_status & XMTSERV) {
+ /* Transmit next data */
+ if (iface->writeNum > 0) {
+ bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
+ iface->writeNum--;
+ }
+ /* start receive immediately after complete sending in
+ * combine mode.
+ */
+ else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ | MDIR | RSTART);
+ } else if (iface->manual_stop)
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ | STOP);
+ SSYNC();
+ /* Clear status */
+ bfin_write_TWI_INT_STAT(XMTSERV);
+ SSYNC();
+ }
+ if (twi_int_status & RCVSERV) {
+ if (iface->readNum > 0) {
+ /* Receive next data */
+ *(iface->transPtr) = bfin_read_TWI_RCV_DATA8();
+ if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+ /* Change combine mode into sub mode after
+ * read first data.
+ */
+ iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+ /* Get read number from first byte in block
+ * combine mode.
+ */
+ if (iface->readNum == 1 && iface->manual_stop)
+ iface->readNum = *iface->transPtr + 1;
+ }
+ iface->transPtr++;
+ iface->readNum--;
+ } else if (iface->manual_stop) {
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ | STOP);
+ SSYNC();
+ }
+ /* Clear interrupt source */
+ bfin_write_TWI_INT_STAT(RCVSERV);
+ SSYNC();
+ }
+ if (twi_int_status & MERR) {
+ bfin_write_TWI_INT_STAT(MERR);
+ bfin_write_TWI_INT_MASK(0);
+ bfin_write_TWI_MASTER_STAT(0x3e);
+ bfin_write_TWI_MASTER_CTL(0);
+ SSYNC();
+ iface->result = -1;
+ /* if both err and complete int stats are set, return proper
+ * results.
+ */
+ if (twi_int_status & MCOMP) {
+ bfin_write_TWI_INT_STAT(MCOMP);
+ bfin_write_TWI_INT_MASK(0);
+ bfin_write_TWI_MASTER_CTL(0);
+ SSYNC();
+ /* If it is a quick transfer, only address bug no data,
+ * not an err, return 1.
+ */
+ if (iface->writeNum == 0 && (mast_stat & BUFRDERR))
+ iface->result = 1;
+ /* If address not acknowledged return -1,
+ * else return 0.
+ */
+ else if (!(mast_stat & ANAK))
+ iface->result = 0;
+ }
+ complete(&iface->complete);
+ return;
+ }
+ if (twi_int_status & MCOMP) {
+ bfin_write_TWI_INT_STAT(MCOMP);
+ SSYNC();
+ if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+ if (iface->readNum == 0) {
+ /* set the read number to 1 and ask for manual
+ * stop in block combine mode
+ */
+ iface->readNum = 1;
+ iface->manual_stop = 1;
+ bfin_write_TWI_MASTER_CTL(
+ bfin_read_TWI_MASTER_CTL()
+ | (0xff << 6));
+ } else {
+ /* set the readd number in other
+ * combine mode.
+ */
+ bfin_write_TWI_MASTER_CTL(
+ (bfin_read_TWI_MASTER_CTL() &
+ (~(0xff << 6))) |
+ ( iface->readNum << 6));
+ }
+ /* remove restart bit and enable master receive */
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() &
+ ~RSTART);
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
+ MEN | MDIR);
+ SSYNC();
+ } else {
+ iface->result = 1;
+ bfin_write_TWI_INT_MASK(0);
+ bfin_write_TWI_MASTER_CTL(0);
+ SSYNC();
+ complete(&iface->complete);
+ }
+ }
+}
+
+/* Interrupt handler */
+static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
+{
+ struct bfin_twi_iface *iface = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&iface->lock, flags);
+ del_timer(&iface->timeout_timer);
+ bfin_twi_handle_interrupt(iface);
+ spin_unlock_irqrestore(&iface->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void bfin_twi_timeout(unsigned long data)
+{
+ struct bfin_twi_iface *iface = (struct bfin_twi_iface *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&iface->lock, flags);
+ bfin_twi_handle_interrupt(iface);
+ if (iface->result == 0) {
+ iface->timeout_count--;
+ if (iface->timeout_count > 0) {
+ iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+ add_timer(&iface->timeout_timer);
+ } else {
+ iface->result = -1;
+ complete(&iface->complete);
+ }
+ }
+ spin_unlock_irqrestore(&iface->lock, flags);
+}
+
+/*
+ * Generic i2c master transfer entrypoint
+ */
+static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct bfin_twi_iface *iface = adap->algo_data;
+ struct i2c_msg *pmsg;
+ int i, ret;
+ int rc = 0;
+
+ if (!(bfin_read_TWI_CONTROL() & TWI_ENA))
+ return -ENXIO;
+
+ mutex_lock(&iface->twi_lock);
+
+ while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) {
+ mutex_unlock(&iface->twi_lock);
+ yield();
+ mutex_lock(&iface->twi_lock);
+ }
+
+ ret = 0;
+ for (i = 0; rc >= 0 && i < num; i++) {
+ pmsg = &msgs[i];
+ if (pmsg->flags & I2C_M_TEN) {
+ dev_err(&(adap->dev), "i2c-bfin-twi: 10 bits addr "
+ "not supported !\n");
+ rc = -EINVAL;
+ break;
+ }
+
+ iface->cur_mode = TWI_I2C_MODE_STANDARD;
+ iface->manual_stop = 0;
+ iface->transPtr = pmsg->buf;
+ iface->writeNum = iface->readNum = pmsg->len;
+ iface->result = 0;
+ iface->timeout_count = 10;
+ /* Set Transmit device address */
+ bfin_write_TWI_MASTER_ADDR(pmsg->addr);
+
+ /* FIFO Initiation. Data in FIFO should be
+ * discarded before start a new operation.
+ */
+ bfin_write_TWI_FIFO_CTL(0x3);
+ SSYNC();
+ bfin_write_TWI_FIFO_CTL(0);
+ SSYNC();
+
+ if (pmsg->flags & I2C_M_RD)
+ iface->read_write = I2C_SMBUS_READ;
+ else {
+ iface->read_write = I2C_SMBUS_WRITE;
+ /* Transmit first data */
+ if (iface->writeNum > 0) {
+ bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
+ iface->writeNum--;
+ SSYNC();
+ }
+ }
+
+ /* clear int stat */
+ bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV);
+
+ /* Interrupt mask . Enable XMT, RCV interrupt */
+ bfin_write_TWI_INT_MASK(MCOMP | MERR |
+ ((iface->read_write == I2C_SMBUS_READ)?
+ RCVSERV : XMTSERV));
+ SSYNC();
+
+ if (pmsg->len > 0 && pmsg->len <= 255)
+ bfin_write_TWI_MASTER_CTL(pmsg->len << 6);
+ else if (pmsg->len > 255) {
+ bfin_write_TWI_MASTER_CTL(0xff << 6);
+ iface->manual_stop = 1;
+ } else
+ break;
+
+ iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+ add_timer(&iface->timeout_timer);
+
+ /* Master enable */
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
+ ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
+ SSYNC();
+
+ wait_for_completion(&iface->complete);
+
+ rc = iface->result;
+ if (rc == 1)
+ ret++;
+ else if (rc == -1)
+ break;
+ }
+
+ /* Release mutex */
+ mutex_unlock(&iface->twi_lock);
+
+ return ret;
+}
+
+/*
+ * SMBus type transfer entrypoint
+ */
+
+int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ struct bfin_twi_iface *iface = adap->algo_data;
+ int rc = 0;
+
+ if (!(bfin_read_TWI_CONTROL() & TWI_ENA))
+ return -ENXIO;
+
+ mutex_lock(&iface->twi_lock);
+
+ while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) {
+ mutex_unlock(&iface->twi_lock);
+ yield();
+ mutex_lock(&iface->twi_lock);
+ }
+
+ iface->writeNum = 0;
+ iface->readNum = 0;
+
+ /* Prepare datas & select mode */
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ iface->transPtr = NULL;
+ iface->cur_mode = TWI_I2C_MODE_STANDARD;
+ break;
+ case I2C_SMBUS_BYTE:
+ if (data == NULL)
+ iface->transPtr = NULL;
+ else {
+ if (read_write == I2C_SMBUS_READ)
+ iface->readNum = 1;
+ else
+ iface->writeNum = 1;
+ iface->transPtr = &data->byte;
+ }
+ iface->cur_mode = TWI_I2C_MODE_STANDARD;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ iface->readNum = 1;
+ iface->cur_mode = TWI_I2C_MODE_COMBINED;
+ } else {
+ iface->writeNum = 1;
+ iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+ }
+ iface->transPtr = &data->byte;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ iface->readNum = 2;
+ iface->cur_mode = TWI_I2C_MODE_COMBINED;
+ } else {
+ iface->writeNum = 2;
+ iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+ }
+ iface->transPtr = (u8 *)&data->word;
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ iface->writeNum = 2;
+ iface->readNum = 2;
+ iface->cur_mode = TWI_I2C_MODE_COMBINED;
+ iface->transPtr = (u8 *)&data->word;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ iface->readNum = 0;
+ iface->cur_mode = TWI_I2C_MODE_COMBINED;
+ } else {
+ iface->writeNum = data->block[0] + 1;
+ iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+ }
+ iface->transPtr = data->block;
+ break;
+ default:
+ return -1;
+ }
+
+ iface->result = 0;
+ iface->manual_stop = 0;
+ iface->read_write = read_write;
+ iface->command = command;
+ iface->timeout_count = 10;
+
+ /* FIFO Initiation. Data in FIFO should be discarded before
+ * start a new operation.
+ */
+ bfin_write_TWI_FIFO_CTL(0x3);
+ SSYNC();
+ bfin_write_TWI_FIFO_CTL(0);
+
+ /* clear int stat */
+ bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV);
+
+ /* Set Transmit device address */
+ bfin_write_TWI_MASTER_ADDR(addr);
+ SSYNC();
+
+ iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+ add_timer(&iface->timeout_timer);
+
+ switch (iface->cur_mode) {
+ case TWI_I2C_MODE_STANDARDSUB:
+ bfin_write_TWI_XMT_DATA8(iface->command);
+ bfin_write_TWI_INT_MASK(MCOMP | MERR |
+ ((iface->read_write == I2C_SMBUS_READ) ?
+ RCVSERV : XMTSERV));
+ SSYNC();
+
+ if (iface->writeNum + 1 <= 255)
+ bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6);
+ else {
+ bfin_write_TWI_MASTER_CTL(0xff << 6);
+ iface->manual_stop = 1;
+ }
+ /* Master enable */
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
+ break;
+ case TWI_I2C_MODE_COMBINED:
+ bfin_write_TWI_XMT_DATA8(iface->command);
+ bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
+ SSYNC();
+
+ if (iface->writeNum > 0)
+ bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6);
+ else
+ bfin_write_TWI_MASTER_CTL(0x1 << 6);
+ /* Master enable */
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
+ break;
+ default:
+ bfin_write_TWI_MASTER_CTL(0);
+ if (size != I2C_SMBUS_QUICK) {
+ /* Don't access xmit data register when this is a
+ * read operation.
+ */
+ if (iface->read_write != I2C_SMBUS_READ) {
+ if (iface->writeNum > 0) {
+ bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
+ if (iface->writeNum <= 255)
+ bfin_write_TWI_MASTER_CTL(iface->writeNum << 6);
+ else {
+ bfin_write_TWI_MASTER_CTL(0xff << 6);
+ iface->manual_stop = 1;
+ }
+ iface->writeNum--;
+ } else {
+ bfin_write_TWI_XMT_DATA8(iface->command);
+ bfin_write_TWI_MASTER_CTL(1 << 6);
+ }
+ } else {
+ if (iface->readNum > 0 && iface->readNum <= 255)
+ bfin_write_TWI_MASTER_CTL(iface->readNum << 6);
+ else if (iface->readNum > 255) {
+ bfin_write_TWI_MASTER_CTL(0xff << 6);
+ iface->manual_stop = 1;
+ } else {
+ del_timer(&iface->timeout_timer);
+ break;
+ }
+ }
+ }
+ bfin_write_TWI_INT_MASK(MCOMP | MERR |
+ ((iface->read_write == I2C_SMBUS_READ) ?
+ RCVSERV : XMTSERV));
+ SSYNC();
+
+ /* Master enable */
+ bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
+ ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
+ break;
+ }
+ SSYNC();
+
+ wait_for_completion(&iface->complete);
+
+ rc = (iface->result >= 0) ? 0 : -1;
+
+ /* Release mutex */
+ mutex_unlock(&iface->twi_lock);
+
+ return rc;
+}
+
+/*
+ * Return what the adapter supports
+ */
+static u32 bfin_twi_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
+ I2C_FUNC_I2C;
+}
+
+
+static struct i2c_algorithm bfin_twi_algorithm = {
+ .master_xfer = bfin_twi_master_xfer,
+ .smbus_xfer = bfin_twi_smbus_xfer,
+ .functionality = bfin_twi_functionality,
+};
+
+
+static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
+{
+/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/
+
+ /* Disable TWI */
+ bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() & ~TWI_ENA);
+ SSYNC();
+
+ return 0;
+}
+
+static int i2c_bfin_twi_resume(struct platform_device *dev)
+{
+/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/
+
+ /* Enable TWI */
+ bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
+ SSYNC();
+
+ return 0;
+}
+
+static int i2c_bfin_twi_probe(struct platform_device *dev)
+{
+ struct bfin_twi_iface *iface = &twi_iface;
+ struct i2c_adapter *p_adap;
+ int rc;
+
+ mutex_init(&(iface->twi_lock));
+ spin_lock_init(&(iface->lock));
+ init_completion(&(iface->complete));
+ iface->irq = IRQ_TWI;
+
+ init_timer(&(iface->timeout_timer));
+ iface->timeout_timer.function = bfin_twi_timeout;
+ iface->timeout_timer.data = (unsigned long)iface;
+
+ p_adap = &iface->adap;
+ p_adap->id = I2C_HW_BLACKFIN;
+ strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
+ p_adap->algo = &bfin_twi_algorithm;
+ p_adap->algo_data = iface;
+ p_adap->class = I2C_CLASS_ALL;
+ p_adap->dev.parent = &dev->dev;
+
+ rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+ IRQF_DISABLED, dev->name, iface);
+ if (rc) {
+ dev_err(&(p_adap->dev), "i2c-bfin-twi: can't get IRQ %d !\n",
+ iface->irq);
+ return -ENODEV;
+ }
+
+ /* Set TWI internal clock as 10MHz */
+ bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
+
+ /* Set Twi interface clock as specified */
+ bfin_write_TWI_CLKDIV((( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ )
+ << 8) | (( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ )
+ & 0xFF));
+
+ /* Enable TWI */
+ bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
+ SSYNC();
+
+ rc = i2c_add_adapter(p_adap);
+ if (rc < 0)
+ free_irq(iface->irq, iface);
+ else
+ platform_set_drvdata(dev, iface);
+
+ return rc;
+}
+
+static int i2c_bfin_twi_remove(struct platform_device *pdev)
+{
+ struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ i2c_del_adapter(&(iface->adap));
+ free_irq(iface->irq, iface);
+
+ return 0;
+}
+
+static struct platform_driver i2c_bfin_twi_driver = {
+ .probe = i2c_bfin_twi_probe,
+ .remove = i2c_bfin_twi_remove,
+ .suspend = i2c_bfin_twi_suspend,
+ .resume = i2c_bfin_twi_resume,
+ .driver = {
+ .name = "i2c-bfin-twi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init i2c_bfin_twi_init(void)
+{
+ pr_info("I2C: Blackfin I2C TWI driver\n");
+
+ return platform_driver_register(&i2c_bfin_twi_driver);
+}
+
+static void __exit i2c_bfin_twi_exit(void)
+{
+ platform_driver_unregister(&i2c_bfin_twi_driver);
+}
+
+MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for Blackfin TWI");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_bfin_twi_init);
+module_exit(i2c_bfin_twi_exit);
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 83496746481..804f0a551c0 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -35,6 +35,7 @@
#include <linux/pci.h>
#include <linux/wait.h>
+#include <linux/isa.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-pcf.h>
@@ -207,7 +208,7 @@ static struct i2c_adapter pcf_isa_ops = {
.name = "i2c-elektor",
};
-static int __init i2c_pcfisa_init(void)
+static int __devinit elektor_match(struct device *dev, unsigned int id)
{
#ifdef __alpha__
/* check to see we have memory mapped PCF8584 connected to the
@@ -222,9 +223,8 @@ static int __init i2c_pcfisa_init(void)
/* yeap, we've found cypress, let's check config */
if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
- pr_debug("%s: found cy82c693, config "
- "register 0x47 = 0x%02x\n",
- pcf_isa_ops.name, config);
+ dev_dbg(dev, "found cy82c693, config "
+ "register 0x47 = 0x%02x\n", config);
/* UP2000 board has this register set to 0xe1,
but the most significant bit as seems can be
@@ -244,9 +244,9 @@ static int __init i2c_pcfisa_init(void)
8.25 MHz (PCI/4) clock
(this can be read from cypress) */
clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
- pr_info("%s: found API UP2000 like "
- "board, will probe PCF8584 "
- "later\n", pcf_isa_ops.name);
+ dev_info(dev, "found API UP2000 like "
+ "board, will probe PCF8584 "
+ "later\n");
}
}
pci_dev_put(cy693_dev);
@@ -256,22 +256,27 @@ static int __init i2c_pcfisa_init(void)
/* sanity checks for mmapped I/O */
if (mmapped && base < 0xc8000) {
- printk(KERN_ERR "%s: incorrect base address (%#x) specified "
- "for mmapped I/O\n", pcf_isa_ops.name, base);
- return -ENODEV;
+ dev_err(dev, "incorrect base address (%#x) specified "
+ "for mmapped I/O\n", base);
+ return 0;
}
if (base == 0) {
base = DEFAULT_BASE;
}
+ return 1;
+}
+static int __devinit elektor_probe(struct device *dev, unsigned int id)
+{
init_waitqueue_head(&pcf_wait);
if (pcf_isa_init())
return -ENODEV;
+ pcf_isa_ops.dev.parent = dev;
if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
goto fail;
- dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base);
+ dev_info(dev, "found device at %#x\n", base);
return 0;
@@ -291,7 +296,7 @@ static int __init i2c_pcfisa_init(void)
return -ENODEV;
}
-static void i2c_pcfisa_exit(void)
+static int __devexit elektor_remove(struct device *dev, unsigned int id)
{
i2c_del_adapter(&pcf_isa_ops);
@@ -307,6 +312,28 @@ static void i2c_pcfisa_exit(void)
iounmap(base_iomem);
release_mem_region(base, 2);
}
+
+ return 0;
+}
+
+static struct isa_driver i2c_elektor_driver = {
+ .match = elektor_match,
+ .probe = elektor_probe,
+ .remove = __devexit_p(elektor_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "i2c-elektor",
+ },
+};
+
+static int __init i2c_pcfisa_init(void)
+{
+ return isa_register_driver(&i2c_elektor_driver, 1);
+}
+
+static void __exit i2c_pcfisa_exit(void)
+{
+ isa_unregister_driver(&i2c_elektor_driver);
}
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
new file mode 100644
index 00000000000..a7dd54654a9
--- /dev/null
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -0,0 +1,215 @@
+/*
+ * Bitbanging I2C bus driver using the GPIO API
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/gpio.h>
+
+/* Toggle SDA by changing the direction of the pin */
+static void i2c_gpio_setsda_dir(void *data, int state)
+{
+ struct i2c_gpio_platform_data *pdata = data;
+
+ if (state)
+ gpio_direction_input(pdata->sda_pin);
+ else
+ gpio_direction_output(pdata->sda_pin, 0);
+}
+
+/*
+ * Toggle SDA by changing the output value of the pin. This is only
+ * valid for pins configured as open drain (i.e. setting the value
+ * high effectively turns off the output driver.)
+ */
+static void i2c_gpio_setsda_val(void *data, int state)
+{
+ struct i2c_gpio_platform_data *pdata = data;
+
+ gpio_set_value(pdata->sda_pin, state);
+}
+
+/* Toggle SCL by changing the direction of the pin. */
+static void i2c_gpio_setscl_dir(void *data, int state)
+{
+ struct i2c_gpio_platform_data *pdata = data;
+
+ if (state)
+ gpio_direction_input(pdata->scl_pin);
+ else
+ gpio_direction_output(pdata->scl_pin, 0);
+}
+
+/*
+ * Toggle SCL by changing the output value of the pin. This is used
+ * for pins that are configured as open drain and for output-only
+ * pins. The latter case will break the i2c protocol, but it will
+ * often work in practice.
+ */
+static void i2c_gpio_setscl_val(void *data, int state)
+{
+ struct i2c_gpio_platform_data *pdata = data;
+
+ gpio_set_value(pdata->scl_pin, state);
+}
+
+int i2c_gpio_getsda(void *data)
+{
+ struct i2c_gpio_platform_data *pdata = data;
+
+ return gpio_get_value(pdata->sda_pin);
+}
+
+int i2c_gpio_getscl(void *data)
+{
+ struct i2c_gpio_platform_data *pdata = data;
+
+ return gpio_get_value(pdata->scl_pin);
+}
+
+static int __init i2c_gpio_probe(struct platform_device *pdev)
+{
+ struct i2c_gpio_platform_data *pdata;
+ struct i2c_algo_bit_data *bit_data;
+ struct i2c_adapter *adap;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -ENXIO;
+
+ ret = -ENOMEM;
+ adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (!adap)
+ goto err_alloc_adap;
+ bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
+ if (!bit_data)
+ goto err_alloc_bit_data;
+
+ ret = gpio_request(pdata->sda_pin, "sda");
+ if (ret)
+ goto err_request_sda;
+ ret = gpio_request(pdata->scl_pin, "scl");
+ if (ret)
+ goto err_request_scl;
+
+ if (pdata->sda_is_open_drain) {
+ gpio_direction_output(pdata->sda_pin, 1);
+ bit_data->setsda = i2c_gpio_setsda_val;
+ } else {
+ gpio_direction_input(pdata->sda_pin);
+ bit_data->setsda = i2c_gpio_setsda_dir;
+ }
+
+ if (pdata->scl_is_open_drain || pdata->scl_is_output_only) {
+ gpio_direction_output(pdata->scl_pin, 1);
+ bit_data->setscl = i2c_gpio_setscl_val;
+ } else {
+ gpio_direction_input(pdata->scl_pin);
+ bit_data->setscl = i2c_gpio_setscl_dir;
+ }
+
+ if (!pdata->scl_is_output_only)
+ bit_data->getscl = i2c_gpio_getscl;
+ bit_data->getsda = i2c_gpio_getsda;
+
+ if (pdata->udelay)
+ bit_data->udelay = pdata->udelay;
+ else if (pdata->scl_is_output_only)
+ bit_data->udelay = 50; /* 10 kHz */
+ else
+ bit_data->udelay = 5; /* 100 kHz */
+
+ if (pdata->timeout)
+ bit_data->timeout = pdata->timeout;
+ else
+ bit_data->timeout = HZ / 10; /* 100 ms */
+
+ bit_data->data = pdata;
+
+ adap->owner = THIS_MODULE;
+ snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
+ adap->algo_data = bit_data;
+ adap->dev.parent = &pdev->dev;
+
+ ret = i2c_bit_add_bus(adap);
+ if (ret)
+ goto err_add_bus;
+
+ platform_set_drvdata(pdev, adap);
+
+ dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
+ pdata->sda_pin, pdata->scl_pin,
+ pdata->scl_is_output_only
+ ? ", no clock stretching" : "");
+
+ return 0;
+
+err_add_bus:
+ gpio_free(pdata->scl_pin);
+err_request_scl:
+ gpio_free(pdata->sda_pin);
+err_request_sda:
+ kfree(bit_data);
+err_alloc_bit_data:
+ kfree(adap);
+err_alloc_adap:
+ return ret;
+}
+
+static int __exit i2c_gpio_remove(struct platform_device *pdev)
+{
+ struct i2c_gpio_platform_data *pdata;
+ struct i2c_adapter *adap;
+
+ adap = platform_get_drvdata(pdev);
+ pdata = pdev->dev.platform_data;
+
+ i2c_del_adapter(adap);
+ gpio_free(pdata->scl_pin);
+ gpio_free(pdata->sda_pin);
+ kfree(adap->algo_data);
+ kfree(adap);
+
+ return 0;
+}
+
+static struct platform_driver i2c_gpio_driver = {
+ .driver = {
+ .name = "i2c-gpio",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(i2c_gpio_remove),
+};
+
+static int __init i2c_gpio_init(void)
+{
+ int ret;
+
+ ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
+ if (ret)
+ printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
+
+ return ret;
+}
+module_init(i2c_gpio_init);
+
+static void __exit i2c_gpio_exit(void)
+{
+ platform_driver_unregister(&i2c_gpio_driver);
+}
+module_exit(i2c_gpio_exit);
+
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index a320e7d82c1..611b57192c9 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -527,7 +527,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
/* set up the sysfs linkage to our parent device */
i801_adapter.dev.parent = &dev->dev;
- snprintf(i801_adapter.name, I2C_NAME_SIZE,
+ snprintf(i801_adapter.name, sizeof(i801_adapter.name),
"SMBus I801 adapter at %04lx", i801_smba);
err = i2c_add_adapter(&i801_adapter);
if (err) {
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index 5f33bc9c1e0..b0e1370075d 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -41,6 +41,10 @@
#include <linux/platform_device.h>
#include <linux/completion.h>
+/* Exported by i2c-core for i2c-isa only */
+extern void i2c_adapter_dev_release(struct device *dev);
+extern struct class i2c_adapter_class;
+
static u32 isa_func(struct i2c_adapter *adapter);
/* This is the actual algorithm we define */
@@ -64,16 +68,6 @@ static u32 isa_func(struct i2c_adapter *adapter)
}
-/* Copied from i2c-core */
-static ssize_t show_adapter_name(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
- return sprintf(buf, "%s\n", adap->name);
-}
-static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
-
-
/* We implement an interface which resembles i2c_{add,del}_driver,
but for i2c-isa drivers. We don't have to remember and handle lists
of drivers and adapters so this is much more simple, of course. */
@@ -139,41 +133,18 @@ static int __init i2c_isa_init(void)
isa_adapter.nr = ANY_I2C_ISA_BUS;
isa_adapter.dev.parent = &platform_bus;
sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr);
- isa_adapter.dev.driver = &i2c_adapter_driver;
isa_adapter.dev.release = &i2c_adapter_dev_release;
+ isa_adapter.dev.class = &i2c_adapter_class;
err = device_register(&isa_adapter.dev);
if (err) {
printk(KERN_ERR "i2c-isa: Failed to register device\n");
goto exit;
}
- err = device_create_file(&isa_adapter.dev, &dev_attr_name);
- if (err) {
- printk(KERN_ERR "i2c-isa: Failed to create name file\n");
- goto exit_unregister;
- }
-
- /* Add this adapter to the i2c_adapter class */
- memset(&isa_adapter.class_dev, 0x00, sizeof(struct class_device));
- isa_adapter.class_dev.dev = &isa_adapter.dev;
- isa_adapter.class_dev.class = &i2c_adapter_class;
- strlcpy(isa_adapter.class_dev.class_id, isa_adapter.dev.bus_id,
- BUS_ID_SIZE);
- err = class_device_register(&isa_adapter.class_dev);
- if (err) {
- printk(KERN_ERR "i2c-isa: Failed to register class device\n");
- goto exit_remove_name;
- }
dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name);
return 0;
-exit_remove_name:
- device_remove_file(&isa_adapter.dev, &dev_attr_name);
-exit_unregister:
- init_completion(&isa_adapter.dev_released); /* Needed? */
- device_unregister(&isa_adapter.dev);
- wait_for_completion(&isa_adapter.dev_released);
exit:
return err;
}
@@ -201,15 +172,11 @@ static void __exit i2c_isa_exit(void)
/* Clean up the sysfs representation */
dev_dbg(&isa_adapter.dev, "Unregistering from sysfs\n");
init_completion(&isa_adapter.dev_released);
- init_completion(&isa_adapter.class_dev_released);
- class_device_unregister(&isa_adapter.class_dev);
- device_remove_file(&isa_adapter.dev, &dev_attr_name);
device_unregister(&isa_adapter.dev);
/* Wait for sysfs to drop all references */
dev_dbg(&isa_adapter.dev, "Waiting for sysfs completion\n");
wait_for_completion(&isa_adapter.dev_released);
- wait_for_completion(&isa_adapter.class_dev_released);
dev_dbg(&isa_adapter.dev, "%s unregistered\n", isa_adapter.name);
}
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index efa3ecc5522..6352121a282 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -118,7 +118,7 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev)
drv_data->adapter.id = I2C_HW_B_IXP2000,
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
- I2C_NAME_SIZE);
+ sizeof(drv_data->adapter.name));
drv_data->adapter.algo_data = &drv_data->algo_data,
drv_data->adapter.dev.parent = &plat_dev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index 08e89b83984..069ed7f3b39 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -127,7 +127,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev)
drv_data->adapter.id = I2C_HW_B_IXP4XX;
drv_data->adapter.class = I2C_CLASS_HWMON;
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
- I2C_NAME_SIZE);
+ sizeof(drv_data->adapter.name));
drv_data->adapter.algo_data = &drv_data->algo_data;
drv_data->adapter.dev.parent = &plat_dev->dev;
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index ee65aa1be13..c6b6898592b 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
-#include <linux/pci.h>
#include <linux/platform_device.h>
#include <asm/io.h>
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index a3283b907eb..a55b3335d1b 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -508,7 +508,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
}
strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
- I2C_NAME_SIZE);
+ sizeof(drv_data->adapter.name));
init_waitqueue_head(&drv_data->waitq);
spin_lock_init(&drv_data->lock);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 1514ec5b77f..3cd0d63e7b5 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -33,6 +33,8 @@
nForce4 MCP-04 0034
nForce4 MCP51 0264
nForce4 MCP55 0368
+ nForce MCP61 03EB
+ nForce MCP65 0446
This driver supports the 2 SMBuses that are included in the MCP of the
nForce2/3/4/5xx chipsets.
@@ -200,6 +202,8 @@ static struct pci_device_id nforce2_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS) },
{ 0 }
};
@@ -240,7 +244,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
smbus->adapter.dev.parent = &dev->dev;
- snprintf(smbus->adapter.name, I2C_NAME_SIZE,
+ snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"SMBus nForce2 adapter at %04x", smbus->base);
error = i2c_add_adapter(&smbus->adapter);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index bcd8367cede..e471e3bfdc1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -605,7 +605,8 @@ omap_i2c_probe(struct platform_device *pdev)
adap->dev.parent = &pdev->dev;
/* i2c device drivers may be active on return from add_adapter() */
- r = i2c_add_adapter(adap);
+ adap->nr = pdev->id;
+ r = i2c_add_numbered_adapter(adap);
if (r) {
dev_err(dev->dev, "failure adding adapter\n");
goto err_free_irq;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 4bc42810b9a..49a95e2887b 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------ *
- * i2c-parport.c I2C bus over parallel port *
+ * i2c-parport-light.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
- Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org>
Based on older i2c-velleman.c driver
Copyright (C) 1995-2000 Simon G. Vogl
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
@@ -34,6 +35,9 @@
#include "i2c-parport.h"
#define DEFAULT_BASE 0x378
+#define DRVNAME "i2c-parport-light"
+
+static struct platform_device *pdev;
static u16 base;
module_param(base, ushort, 0);
@@ -106,7 +110,7 @@ static struct i2c_algo_bit_data parport_algo_data = {
.timeout = HZ,
};
-/* ----- I2c structure ---------------------------------------------------- */
+/* ----- Driver registration ---------------------------------------------- */
static struct i2c_adapter parport_adapter = {
.owner = THIS_MODULE,
@@ -116,55 +120,141 @@ static struct i2c_adapter parport_adapter = {
.name = "Parallel port adapter (light)",
};
-/* ----- Module loading, unloading and information ------------------------ */
+static int __devinit i2c_parport_probe(struct platform_device *pdev)
+{
+ int err;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, res->end - res->start + 1, DRVNAME))
+ return -EBUSY;
+
+ /* Reset hardware to a sane state (SCL and SDA high) */
+ parport_setsda(NULL, 1);
+ parport_setscl(NULL, 1);
+ /* Other init if needed (power on...) */
+ if (adapter_parm[type].init.val)
+ line_set(1, &adapter_parm[type].init);
+
+ parport_adapter.dev.parent = &pdev->dev;
+ err = i2c_bit_add_bus(&parport_adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to register with I2C\n");
+ goto exit_region;
+ }
+ return 0;
+
+exit_region:
+ release_region(res->start, res->end - res->start + 1);
+ return err;
+}
+
+static int __devexit i2c_parport_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ i2c_del_adapter(&parport_adapter);
+
+ /* Un-init if needed (power off...) */
+ if (adapter_parm[type].init.val)
+ line_set(0, &adapter_parm[type].init);
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ release_region(res->start, res->end - res->start + 1);
+ return 0;
+}
+
+static struct platform_driver i2c_parport_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = i2c_parport_probe,
+ .remove = __devexit_p(i2c_parport_remove),
+};
+
+static int __init i2c_parport_device_add(u16 address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + 2,
+ .name = DRVNAME,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc(DRVNAME, -1);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
static int __init i2c_parport_init(void)
{
+ int err;
+
if (type < 0) {
- printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
+ printk(KERN_ERR DRVNAME ": adapter type unspecified\n");
return -ENODEV;
}
if (type >= ARRAY_SIZE(adapter_parm)) {
- printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
+ printk(KERN_ERR DRVNAME ": invalid type (%d)\n", type);
return -ENODEV;
}
if (base == 0) {
- printk(KERN_INFO "i2c-parport: using default base 0x%x\n", DEFAULT_BASE);
+ pr_info(DRVNAME ": using default base 0x%x\n", DEFAULT_BASE);
base = DEFAULT_BASE;
}
- if (!request_region(base, 3, "i2c-parport"))
- return -ENODEV;
-
if (!adapter_parm[type].getscl.val)
parport_algo_data.getscl = NULL;
- /* Reset hardware to a sane state (SCL and SDA high) */
- parport_setsda(NULL, 1);
- parport_setscl(NULL, 1);
- /* Other init if needed (power on...) */
- if (adapter_parm[type].init.val)
- line_set(1, &adapter_parm[type].init);
+ /* Sets global pdev as a side effect */
+ err = i2c_parport_device_add(base);
+ if (err)
+ goto exit;
- if (i2c_bit_add_bus(&parport_adapter) < 0) {
- printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
- release_region(base, 3);
- return -ENODEV;
- }
+ err = platform_driver_register(&i2c_parport_driver);
+ if (err)
+ goto exit_device;
return 0;
+
+exit_device:
+ platform_device_unregister(pdev);
+exit:
+ return err;
}
static void __exit i2c_parport_exit(void)
{
- /* Un-init if needed (power off...) */
- if (adapter_parm[type].init.val)
- line_set(0, &adapter_parm[type].init);
-
- i2c_del_adapter(&parport_adapter);
- release_region(base, 3);
+ platform_driver_unregister(&i2c_parport_driver);
+ platform_device_unregister(pdev);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 66696a40c7b..8c953707253 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------ *
* i2c-parport.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
- Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org>
Based on older i2c-philips-par.c driver
Copyright (C) 1995-2000 Simon G. Vogl
@@ -137,19 +137,12 @@ static struct i2c_algo_bit_data parport_algo_data = {
.setscl = parport_setscl,
.getsda = parport_getsda,
.getscl = parport_getscl,
- .udelay = 60,
+ .udelay = 10, /* ~50 kbps */
.timeout = HZ,
};
/* ----- I2c and parallel port call-back functions and structures --------- */
-static struct i2c_adapter parport_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
- .id = I2C_HW_B_LP,
- .name = "Parallel port adapter",
-};
-
static void i2c_parport_attach (struct parport *port)
{
struct i2c_par *adapter;
@@ -169,10 +162,17 @@ static void i2c_parport_attach (struct parport *port)
}
/* Fill the rest of the structure */
- adapter->adapter = parport_adapter;
+ adapter->adapter.owner = THIS_MODULE;
+ adapter->adapter.class = I2C_CLASS_HWMON;
+ adapter->adapter.id = I2C_HW_B_LP;
+ strlcpy(adapter->adapter.name, "Parallel port adapter",
+ sizeof(adapter->adapter.name));
adapter->algo_data = parport_algo_data;
- if (!adapter_parm[type].getscl.val)
+ /* Slow down if we can't sense SCL */
+ if (!adapter_parm[type].getscl.val) {
adapter->algo_data.getscl = NULL;
+ adapter->algo_data.udelay = 50; /* ~10 kbps */
+ }
adapter->algo_data.data = port;
adapter->adapter.algo_data = &adapter->algo_data;
@@ -214,11 +214,12 @@ static void i2c_parport_detach (struct parport *port)
for (prev = NULL, adapter = adapter_list; adapter;
prev = adapter, adapter = adapter->next) {
if (adapter->pdev->port == port) {
+ i2c_del_adapter(&adapter->adapter);
+
/* Un-init if needed (power off...) */
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
- i2c_del_adapter(&adapter->adapter);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index bf89eeef74e..58e32714afb 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -358,7 +358,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev,
}
smbus->adapter.owner = THIS_MODULE;
- snprintf(smbus->adapter.name, I2C_NAME_SIZE,
+ snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"PA Semi SMBus adapter at 0x%lx", smbus->base);
smbus->adapter.class = I2C_CLASS_HWMON;
smbus->adapter.algo = &smbus_algorithm;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index cc6536a19ec..5161aaf9341 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -25,9 +25,9 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/pci.h>
#include <linux/wait.h>
+#include <linux/isa.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-pca.h>
@@ -119,27 +119,26 @@ static struct i2c_adapter pca_isa_ops = {
.name = "PCA9564 ISA Adapter",
};
-static int __init pca_isa_init(void)
+static int __devinit pca_isa_probe(struct device *dev, unsigned int id)
{
-
init_waitqueue_head(&pca_wait);
- printk(KERN_INFO "i2c-pca-isa: i/o base %#08lx. irq %d\n", base, irq);
+ dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
- printk(KERN_ERR "i2c-pca-isa: I/O address %#08lx is in use.\n", base);
+ dev_err(dev, "I/O address %#08lx is in use\n", base);
goto out;
}
if (irq > -1) {
if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) {
- printk(KERN_ERR "i2c-pca-isa: Request irq%d failed\n", irq);
+ dev_err(dev, "Request irq%d failed\n", irq);
goto out_region;
}
}
if (i2c_pca_add_bus(&pca_isa_ops) < 0) {
- printk(KERN_ERR "i2c-pca-isa: Failed to add i2c bus\n");
+ dev_err(dev, "Failed to add i2c bus\n");
goto out_irq;
}
@@ -154,7 +153,7 @@ static int __init pca_isa_init(void)
return -ENODEV;
}
-static void pca_isa_exit(void)
+static int __devexit pca_isa_remove(struct device *dev, unsigned int id)
{
i2c_del_adapter(&pca_isa_ops);
@@ -163,6 +162,27 @@ static void pca_isa_exit(void)
free_irq(irq, &pca_isa_ops);
}
release_region(base, IO_SIZE);
+
+ return 0;
+}
+
+static struct isa_driver pca_isa_driver = {
+ .probe = pca_isa_probe,
+ .remove = __devexit_p(pca_isa_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "i2c-pca-isa",
+ }
+};
+
+static int __init pca_isa_init(void)
+{
+ return isa_register_driver(&pca_isa_driver, 1);
+}
+
+static void __exit pca_isa_exit(void)
+{
+ isa_unregister_driver(&pca_isa_driver);
}
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 21b18090408..5a52bf5e3fb 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -428,7 +428,7 @@ static int __devinit piix4_probe(struct pci_dev *dev,
/* set up the sysfs linkage to our parent device */
piix4_adapter.dev.parent = &dev->dev;
- snprintf(piix4_adapter.name, I2C_NAME_SIZE,
+ snprintf(piix4_adapter.name, sizeof(piix4_adapter.name),
"SMBus PIIX4 adapter at %04x", piix4_smba);
if ((retval = i2c_add_adapter(&piix4_adapter))) {
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 14e83d0aac8..873544ab598 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -539,6 +539,18 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
writel(icr | ICR_START | ICR_TB, _ICR(i2c));
}
+static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c)
+{
+ u32 icr;
+
+ /*
+ * Clear the STOP and ACK flags
+ */
+ icr = readl(_ICR(i2c));
+ icr &= ~(ICR_STOP | ICR_ACKNAK);
+ writel(icr, _IRC(i2c));
+}
+
/*
* We are protected by the adapter bus mutex.
*/
@@ -581,6 +593,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
* The rest of the processing occurs in the interrupt handler.
*/
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+ i2c_pxa_stop_message(i2c);
/*
* We place the return code in i2c->msg_idx.
@@ -825,7 +838,7 @@ static const struct i2c_algorithm i2c_pxa_algorithm = {
};
static struct pxa_i2c i2c_pxa = {
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(i2c_pxa.lock),
.adap = {
.owner = THIS_MODULE,
.algo = &i2c_pxa_algorithm,
@@ -839,9 +852,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
{
struct pxa_i2c *i2c = &i2c_pxa;
struct resource *res;
-#ifdef CONFIG_I2C_PXA_SLAVE
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
-#endif
int ret;
int irq;
@@ -889,14 +900,14 @@ static int i2c_pxa_probe(struct platform_device *dev)
pxa_gpio_mode(GPIO117_I2CSCL_MD);
pxa_gpio_mode(GPIO118_I2CSDA_MD);
#endif
- pxa_set_cken(CKEN14_I2C, 1);
+ pxa_set_cken(CKEN_I2C, 1);
break;
#ifdef CONFIG_PXA27x
case 1:
local_irq_disable();
PCFR |= PCFR_PI2CEN;
local_irq_enable();
- pxa_set_cken(CKEN15_PWRI2C, 1);
+ pxa_set_cken(CKEN_PWRI2C, 1);
#endif
}
@@ -911,6 +922,10 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &dev->dev;
+ if (plat) {
+ i2c->adap.class = plat->class;
+ }
+
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
@@ -933,11 +948,11 @@ eadapt:
ereqirq:
switch (dev->id) {
case 0:
- pxa_set_cken(CKEN14_I2C, 0);
+ pxa_set_cken(CKEN_I2C, 0);
break;
#ifdef CONFIG_PXA27x
case 1:
- pxa_set_cken(CKEN15_PWRI2C, 0);
+ pxa_set_cken(CKEN_PWRI2C, 0);
local_irq_disable();
PCFR &= ~PCFR_PI2CEN;
local_irq_enable();
@@ -960,11 +975,11 @@ static int i2c_pxa_remove(struct platform_device *dev)
free_irq(i2c->irq, i2c);
switch (dev->id) {
case 0:
- pxa_set_cken(CKEN14_I2C, 0);
+ pxa_set_cken(CKEN_I2C, 0);
break;
#ifdef CONFIG_PXA27x
case 1:
- pxa_set_cken(CKEN15_PWRI2C, 0);
+ pxa_set_cken(CKEN_PWRI2C, 0);
local_irq_disable();
PCFR &= ~PCFR_PI2CEN;
local_irq_enable();
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 556f244aae7..e68a96f589f 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -61,6 +61,8 @@ struct s3c24xx_i2c {
unsigned int msg_idx;
unsigned int msg_ptr;
+ unsigned int tx_setup;
+
enum s3c24xx_i2c_state state;
void __iomem *regs;
@@ -199,8 +201,11 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
writeb(addr, i2c->regs + S3C2410_IICDS);
- // delay a bit and reset iiccon before setting start (per samsung)
- udelay(1);
+ /* delay here to ensure the data byte has gotten onto the bus
+ * before the transaction is started */
+
+ ndelay(i2c->tx_setup);
+
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
writel(iiccon, i2c->regs + S3C2410_IICCON);
@@ -322,7 +327,15 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
if (!is_msgend(i2c)) {
byte = i2c->msg->buf[i2c->msg_ptr++];
writeb(byte, i2c->regs + S3C2410_IICDS);
-
+
+ /* delay after writing the byte to allow the
+ * data setup time on the bus, as writing the
+ * data to the register causes the first bit
+ * to appear on SDA, and SCL will change as
+ * soon as the interrupt is acknowledged */
+
+ ndelay(i2c->tx_setup);
+
} else if (!is_lastmsg(i2c)) {
/* we need to go to the next i2c message */
@@ -570,9 +583,10 @@ static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
};
static struct s3c24xx_i2c s3c24xx_i2c = {
- .lock = SPIN_LOCK_UNLOCKED,
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
- .adap = {
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock),
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
+ .tx_setup = 50,
+ .adap = {
.name = "s3c2410-i2c",
.owner = THIS_MODULE,
.algo = &s3c24xx_i2c_algorithm,
@@ -731,26 +745,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
return 0;
}
-static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c)
-{
- if (i2c->clk != NULL && !IS_ERR(i2c->clk)) {
- clk_disable(i2c->clk);
- clk_put(i2c->clk);
- i2c->clk = NULL;
- }
-
- if (i2c->regs != NULL) {
- iounmap(i2c->regs);
- i2c->regs = NULL;
- }
-
- if (i2c->ioarea != NULL) {
- release_resource(i2c->ioarea);
- kfree(i2c->ioarea);
- i2c->ioarea = NULL;
- }
-}
-
/* s3c24xx_i2c_probe
*
* called by the bus driver when a suitable device is found
@@ -769,7 +763,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (IS_ERR(i2c->clk)) {
dev_err(&pdev->dev, "cannot get clock\n");
ret = -ENOENT;
- goto out;
+ goto err_noclk;
}
dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
@@ -782,7 +776,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (res == NULL) {
dev_err(&pdev->dev, "cannot find IO resource\n");
ret = -ENOENT;
- goto out;
+ goto err_clk;
}
i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1,
@@ -791,7 +785,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (i2c->ioarea == NULL) {
dev_err(&pdev->dev, "cannot request IO\n");
ret = -ENXIO;
- goto out;
+ goto err_clk;
}
i2c->regs = ioremap(res->start, (res->end-res->start)+1);
@@ -799,7 +793,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (i2c->regs == NULL) {
dev_err(&pdev->dev, "cannot map IO\n");
ret = -ENXIO;
- goto out;
+ goto err_ioarea;
}
dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
@@ -813,7 +807,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
ret = s3c24xx_i2c_init(i2c);
if (ret != 0)
- goto out;
+ goto err_iomap;
/* find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
@@ -823,7 +817,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (res == NULL) {
dev_err(&pdev->dev, "cannot find IRQ\n");
ret = -ENOENT;
- goto out;
+ goto err_iomap;
}
ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
@@ -831,7 +825,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ\n");
- goto out;
+ goto err_iomap;
}
i2c->irq = res;
@@ -841,17 +835,29 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
dev_err(&pdev->dev, "failed to add bus to i2c core\n");
- goto out;
+ goto err_irq;
}
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
+ return 0;
- out:
- if (ret < 0)
- s3c24xx_i2c_free(i2c);
+ err_irq:
+ free_irq(i2c->irq->start, i2c);
+
+ err_iomap:
+ iounmap(i2c->regs);
+ err_ioarea:
+ release_resource(i2c->ioarea);
+ kfree(i2c->ioarea);
+
+ err_clk:
+ clk_disable(i2c->clk);
+ clk_put(i2c->clk);
+
+ err_noclk:
return ret;
}
@@ -863,11 +869,17 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
static int s3c24xx_i2c_remove(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
-
- if (i2c != NULL) {
- s3c24xx_i2c_free(i2c);
- platform_set_drvdata(pdev, NULL);
- }
+
+ i2c_del_adapter(&i2c->adap);
+ free_irq(i2c->irq->start, i2c);
+
+ clk_disable(i2c->clk);
+ clk_put(i2c->clk);
+
+ iounmap(i2c->regs);
+
+ release_resource(i2c->ioarea);
+ kfree(i2c->ioarea);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
new file mode 100644
index 00000000000..10af8d31e12
--- /dev/null
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Generic I2C Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/io.h>
+
+struct simtec_i2c_data {
+ struct resource *ioarea;
+ void __iomem *reg;
+ struct i2c_adapter adap;
+ struct i2c_algo_bit_data bit;
+};
+
+#define CMD_SET_SDA (1<<2)
+#define CMD_SET_SCL (1<<3)
+
+#define STATE_SDA (1<<0)
+#define STATE_SCL (1<<1)
+
+/* i2c bit-bus functions */
+
+static void simtec_i2c_setsda(void *pw, int state)
+{
+ struct simtec_i2c_data *pd = pw;
+ writeb(CMD_SET_SDA | (state ? STATE_SDA : 0), pd->reg);
+}
+
+static void simtec_i2c_setscl(void *pw, int state)
+{
+ struct simtec_i2c_data *pd = pw;
+ writeb(CMD_SET_SCL | (state ? STATE_SCL : 0), pd->reg);
+}
+
+static int simtec_i2c_getsda(void *pw)
+{
+ struct simtec_i2c_data *pd = pw;
+ return readb(pd->reg) & STATE_SDA ? 1 : 0;
+}
+
+static int simtec_i2c_getscl(void *pw)
+{
+ struct simtec_i2c_data *pd = pw;
+ return readb(pd->reg) & STATE_SCL ? 1 : 0;
+}
+
+/* device registration */
+
+static int simtec_i2c_probe(struct platform_device *dev)
+{
+ struct simtec_i2c_data *pd;
+ struct resource *res;
+ int size;
+ int ret;
+
+ pd = kzalloc(sizeof(struct simtec_i2c_data), GFP_KERNEL);
+ if (pd == NULL) {
+ dev_err(&dev->dev, "cannot allocate private data\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(dev, pd);
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&dev->dev, "cannot find IO resource\n");
+ ret = -ENOENT;
+ goto err;
+ }
+
+ size = (res->end-res->start)+1;
+
+ pd->ioarea = request_mem_region(res->start, size, dev->name);
+ if (pd->ioarea == NULL) {
+ dev_err(&dev->dev, "cannot request IO\n");
+ ret = -ENXIO;
+ goto err;
+ }
+
+ pd->reg = ioremap(res->start, size);
+ if (pd->reg == NULL) {
+ dev_err(&dev->dev, "cannot map IO\n");
+ ret = -ENXIO;
+ goto err_res;
+ }
+
+ /* setup the private data */
+
+ pd->adap.owner = THIS_MODULE;
+ pd->adap.algo_data = &pd->bit;
+ pd->adap.dev.parent = &dev->dev;
+
+ strlcpy(pd->adap.name, "Simtec I2C", sizeof(pd->adap.name));
+
+ pd->bit.data = pd;
+ pd->bit.setsda = simtec_i2c_setsda;
+ pd->bit.setscl = simtec_i2c_setscl;
+ pd->bit.getsda = simtec_i2c_getsda;
+ pd->bit.getscl = simtec_i2c_getscl;
+ pd->bit.timeout = HZ;
+ pd->bit.udelay = 20;
+
+ ret = i2c_bit_add_bus(&pd->adap);
+ if (ret)
+ goto err_all;
+
+ return 0;
+
+ err_all:
+ iounmap(pd->reg);
+
+ err_res:
+ release_resource(pd->ioarea);
+ kfree(pd->ioarea);
+
+ err:
+ kfree(pd);
+ return ret;
+}
+
+static int simtec_i2c_remove(struct platform_device *dev)
+{
+ struct simtec_i2c_data *pd = platform_get_drvdata(dev);
+
+ i2c_del_adapter(&pd->adap);
+
+ iounmap(pd->reg);
+ release_resource(pd->ioarea);
+ kfree(pd->ioarea);
+ kfree(pd);
+
+ return 0;
+}
+
+
+/* device driver */
+
+static struct platform_driver simtec_i2c_driver = {
+ .driver = {
+ .name = "simtec-i2c",
+ .owner = THIS_MODULE,
+ },
+ .probe = simtec_i2c_probe,
+ .remove = simtec_i2c_remove,
+};
+
+static int __init i2c_adap_simtec_init(void)
+{
+ return platform_driver_register(&simtec_i2c_driver);
+}
+
+static void __exit i2c_adap_simtec_exit(void)
+{
+ platform_driver_unregister(&simtec_i2c_driver);
+}
+
+module_init(i2c_adap_simtec_init);
+module_exit(i2c_adap_simtec_exit);
+
+MODULE_DESCRIPTION("Simtec Generic I2C Bus driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 4157b0cd604..dc235bb8e24 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -300,7 +300,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
/* set up the sysfs linkage to our parent device */
sis96x_adapter.dev.parent = &dev->dev;
- snprintf(sis96x_adapter.name, I2C_NAME_SIZE,
+ snprintf(sis96x_adapter.name, sizeof(sis96x_adapter.name),
"SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base);
if ((retval = i2c_add_adapter(&sis96x_adapter))) {
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
new file mode 100644
index 00000000000..907999049d5
--- /dev/null
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -0,0 +1,277 @@
+/*
+ * driver for the i2c-tiny-usb adapter - 1.0
+ * http://www.harbaum.org/till/i2c_tiny_usb
+ *
+ * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+/* include interfaces to usb layer */
+#include <linux/usb.h>
+
+/* include interface to i2c layer */
+#include <linux/i2c.h>
+
+/* commands via USB, must match command ids in the firmware */
+#define CMD_ECHO 0
+#define CMD_GET_FUNC 1
+#define CMD_SET_DELAY 2
+#define CMD_GET_STATUS 3
+
+#define CMD_I2C_IO 4
+#define CMD_I2C_IO_BEGIN (1<<0)
+#define CMD_I2C_IO_END (1<<1)
+
+/* i2c bit delay, default is 10us -> 100kHz */
+static int delay = 10;
+module_param(delay, int, 0);
+MODULE_PARM_DESC(delay, "bit delay in microseconds, "
+ "e.g. 10 for 100kHz (default is 100kHz)");
+
+static int usb_read(struct i2c_adapter *adapter, int cmd,
+ int value, int index, void *data, int len);
+
+static int usb_write(struct i2c_adapter *adapter, int cmd,
+ int value, int index, void *data, int len);
+
+/* ----- begin of i2c layer ---------------------------------------------- */
+
+#define STATUS_IDLE 0
+#define STATUS_ADDRESS_ACK 1
+#define STATUS_ADDRESS_NAK 2
+
+static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+ unsigned char status;
+ struct i2c_msg *pmsg;
+ int i;
+
+ dev_dbg(&adapter->dev, "master xfer %d messages:\n", num);
+
+ for (i = 0 ; i < num ; i++) {
+ int cmd = CMD_I2C_IO;
+
+ if (i == 0)
+ cmd |= CMD_I2C_IO_BEGIN;
+
+ if (i == num-1)
+ cmd |= CMD_I2C_IO_END;
+
+ pmsg = &msgs[i];
+
+ dev_dbg(&adapter->dev,
+ " %d: %s (flags %d) %d bytes to 0x%02x\n",
+ i, pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->flags, pmsg->len, pmsg->addr);
+
+ /* and directly send the message */
+ if (pmsg->flags & I2C_M_RD) {
+ /* read data */
+ if (usb_read(adapter, cmd,
+ pmsg->flags, pmsg->addr,
+ pmsg->buf, pmsg->len) != pmsg->len) {
+ dev_err(&adapter->dev,
+ "failure reading data\n");
+ return -EREMOTEIO;
+ }
+ } else {
+ /* write data */
+ if (usb_write(adapter, cmd,
+ pmsg->flags, pmsg->addr,
+ pmsg->buf, pmsg->len) != pmsg->len) {
+ dev_err(&adapter->dev,
+ "failure writing data\n");
+ return -EREMOTEIO;
+ }
+ }
+
+ /* read status */
+ if (usb_read(adapter, CMD_GET_STATUS, 0, 0, &status, 1) != 1) {
+ dev_err(&adapter->dev, "failure reading status\n");
+ return -EREMOTEIO;
+ }
+
+ dev_dbg(&adapter->dev, " status = %d\n", status);
+ if (status == STATUS_ADDRESS_NAK)
+ return -EREMOTEIO;
+ }
+
+ return i;
+}
+
+static u32 usb_func(struct i2c_adapter *adapter)
+{
+ u32 func;
+
+ /* get functionality from adapter */
+ if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) !=
+ sizeof(func)) {
+ dev_err(&adapter->dev, "failure reading functionality\n");
+ return 0;
+ }
+
+ return func;
+}
+
+/* This is the actual algorithm we define */
+static const struct i2c_algorithm usb_algorithm = {
+ .master_xfer = usb_xfer,
+ .functionality = usb_func,
+};
+
+/* ----- end of i2c layer ------------------------------------------------ */
+
+/* ----- begin of usb layer ---------------------------------------------- */
+
+/* The usb i2c interface uses a vid/pid pair donated by */
+/* Future Technology Devices International Ltd. */
+static struct usb_device_id i2c_tiny_usb_table [] = {
+ { USB_DEVICE(0x0403, 0xc631) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
+
+/* Structure to hold all of our device specific stuff */
+struct i2c_tiny_usb {
+ struct usb_device *usb_dev; /* the usb device for this device */
+ struct usb_interface *interface; /* the interface for this device */
+ struct i2c_adapter adapter; /* i2c related things */
+};
+
+static int usb_read(struct i2c_adapter *adapter, int cmd,
+ int value, int index, void *data, int len)
+{
+ struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+
+ /* do control transfer */
+ return usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
+ cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_IN, value, index, data, len, 2000);
+}
+
+static int usb_write(struct i2c_adapter *adapter, int cmd,
+ int value, int index, void *data, int len)
+{
+ struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+
+ /* do control transfer */
+ return usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
+ cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ value, index, data, len, 2000);
+}
+
+static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)
+{
+ usb_put_dev(dev->usb_dev);
+ kfree(dev);
+}
+
+static int i2c_tiny_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct i2c_tiny_usb *dev;
+ int retval = -ENOMEM;
+ u16 version;
+
+ dev_dbg(&interface->dev, "probing usb device\n");
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&interface->dev, "Out of memory\n");
+ goto error;
+ }
+
+ dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+ dev->interface = interface;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ version = le16_to_cpu(dev->usb_dev->descriptor.bcdDevice);
+ dev_info(&interface->dev,
+ "version %x.%02x found at bus %03d address %03d\n",
+ version >> 8, version & 0xff,
+ dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+ /* setup i2c adapter description */
+ dev->adapter.owner = THIS_MODULE;
+ dev->adapter.class = I2C_CLASS_HWMON;
+ dev->adapter.algo = &usb_algorithm;
+ dev->adapter.algo_data = dev;
+ snprintf(dev->adapter.name, I2C_NAME_SIZE,
+ "i2c-tiny-usb at bus %03d device %03d",
+ dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+ if (usb_write(&dev->adapter, CMD_SET_DELAY,
+ cpu_to_le16(delay), 0, NULL, 0) != 0) {
+ dev_err(&dev->adapter.dev,
+ "failure setting delay to %dus\n", delay);
+ retval = -EIO;
+ goto error;
+ }
+
+ dev->adapter.dev.parent = &dev->interface->dev;
+
+ /* and finally attach to i2c layer */
+ i2c_add_adapter(&dev->adapter);
+
+ /* inform user about successful attachment to i2c layer */
+ dev_info(&dev->adapter.dev, "connected i2c-tiny-usb device\n");
+
+ return 0;
+
+ error:
+ if (dev)
+ i2c_tiny_usb_free(dev);
+
+ return retval;
+}
+
+static void i2c_tiny_usb_disconnect(struct usb_interface *interface)
+{
+ struct i2c_tiny_usb *dev = usb_get_intfdata(interface);
+
+ i2c_del_adapter(&dev->adapter);
+ usb_set_intfdata(interface, NULL);
+ i2c_tiny_usb_free(dev);
+
+ dev_dbg(&interface->dev, "disconnected\n");
+}
+
+static struct usb_driver i2c_tiny_usb_driver = {
+ .name = "i2c-tiny-usb",
+ .probe = i2c_tiny_usb_probe,
+ .disconnect = i2c_tiny_usb_disconnect,
+ .id_table = i2c_tiny_usb_table,
+};
+
+static int __init usb_i2c_tiny_usb_init(void)
+{
+ /* register this driver with the USB subsystem */
+ return usb_register(&i2c_tiny_usb_driver);
+}
+
+static void __exit usb_i2c_tiny_usb_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&i2c_tiny_usb_driver);
+}
+
+module_init(usb_i2c_tiny_usb_init);
+module_exit(usb_i2c_tiny_usb_exit);
+
+/* ----- end of usb layer ------------------------------------------------ */
+
+MODULE_AUTHOR("Till Harbaum <Till@Harbaum.org>");
+MODULE_DESCRIPTION("i2c-tiny-usb driver v1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 03c5fc86854..7a2bc06304f 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -404,7 +404,7 @@ found:
}
vt596_adapter.dev.parent = &pdev->dev;
- snprintf(vt596_adapter.name, I2C_NAME_SIZE,
+ snprintf(vt596_adapter.name, sizeof(vt596_adapter.name),
"SMBus Via Pro adapter at %04x", vt596_smba);
vt596_pdev = pci_dev_get(pdev);
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 0b082c5a019..0db56e7bc34 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -441,7 +441,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
adapter = &iface->adapter;
i2c_set_adapdata(adapter, iface);
- snprintf(adapter->name, I2C_NAME_SIZE, "%s ACB%d", text, index);
+ snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
adapter->owner = THIS_MODULE;
adapter->id = I2C_HW_SMBUS_SCX200;
adapter->algo = &scx200_acb_algorithm;
@@ -599,6 +599,7 @@ static __init int scx200_scan_pci(void)
else {
int i;
+ pci_dev_put(pdev);
for (i = 0; i < MAX_DEVICES; ++i) {
if (base[i] == 0)
continue;
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 87ee3ce5861..ea085a006ea 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -3,11 +3,10 @@
#
menu "Miscellaneous I2C Chip support"
- depends on I2C
config SENSORS_DS1337
tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes here you get support for Dallas Semiconductor
DS1337 and DS1339 real-time clock chips.
@@ -17,7 +16,7 @@ config SENSORS_DS1337
config SENSORS_DS1374
tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes here you get support for Dallas Semiconductor
DS1374 real-time clock chips.
@@ -27,7 +26,7 @@ config SENSORS_DS1374
config SENSORS_EEPROM
tristate "EEPROM reader"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes here you get read-only access to the EEPROM data
available on modern memory DIMMs and Sony Vaio laptops. Such
@@ -38,7 +37,7 @@ config SENSORS_EEPROM
config SENSORS_PCF8574
tristate "Philips PCF8574 and PCF8574A"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
default n
help
If you say yes here you get support for Philips PCF8574 and
@@ -52,7 +51,7 @@ config SENSORS_PCF8574
config SENSORS_PCA9539
tristate "Philips PCA9539 16-bit I/O port"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes here you get support for the Philips PCA9539
16-bit I/O port.
@@ -62,7 +61,7 @@ config SENSORS_PCA9539
config SENSORS_PCF8591
tristate "Philips PCF8591"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
default n
help
If you say yes here you get support for Philips PCF8591 chips.
@@ -75,7 +74,7 @@ config SENSORS_PCF8591
config ISP1301_OMAP
tristate "Philips ISP1301 with OMAP OTG"
- depends on I2C && ARCH_OMAP_OTG
+ depends on ARCH_OMAP_OTG
help
If you say yes here you get support for the Philips ISP1301
USB-On-The-Go transceiver working with the OMAP OTG controller.
@@ -90,7 +89,7 @@ config ISP1301_OMAP
# and having mostly OMAP-specific board support
config TPS65010
tristate "TPS6501x Power Management chips"
- depends on I2C && ARCH_OMAP
+ depends on ARCH_OMAP
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes here you get support for the TPS6501x series of
@@ -103,7 +102,7 @@ config TPS65010
config SENSORS_M41T00
tristate "ST M41T00 RTC chip"
- depends on I2C && PPC32
+ depends on PPC32
help
If you say yes here you get support for the ST M41T00 RTC chip.
@@ -112,7 +111,7 @@ config SENSORS_M41T00
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes here you get support for the Maxim MAX6875
EEPROM-programmable, quad power-supply sequencer/supervisor.
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 214fbb1423c..7ed92dc3d83 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -351,8 +351,10 @@ static void tps65010_interrupt(struct tps65010 *tps)
#if 0
/* REVISIT: this might need its own workqueue
* plus tweaks including deadlock avoidance ...
+ * also needs to get error handling and probably
+ * an #ifdef CONFIG_SOFTWARE_SUSPEND
*/
- software_suspend();
+ pm_suspend(PM_SUSPEND_DISK);
#endif
poll = 1;
}
diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c
new file mode 100644
index 00000000000..ffb35f09df0
--- /dev/null
+++ b/drivers/i2c/i2c-boardinfo.c
@@ -0,0 +1,90 @@
+/*
+ * i2c-boardinfo.h - collect pre-declarations of I2C devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include "i2c-core.h"
+
+
+/* These symbols are exported ONLY FOR the i2c core.
+ * No other users will be supported.
+ */
+DEFINE_MUTEX(__i2c_board_lock);
+EXPORT_SYMBOL_GPL(__i2c_board_lock);
+
+LIST_HEAD(__i2c_board_list);
+EXPORT_SYMBOL_GPL(__i2c_board_list);
+
+int __i2c_first_dynamic_bus_num;
+EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num);
+
+
+/**
+ * i2c_register_board_info - statically declare I2C devices
+ * @busnum: identifies the bus to which these devices belong
+ * @info: vector of i2c device descriptors
+ * @len: how many descriptors in the vector; may be zero to reserve
+ * the specified bus number.
+ *
+ * Systems using the Linux I2C driver stack can declare tables of board info
+ * while they initialize. This should be done in board-specific init code
+ * near arch_initcall() time, or equivalent, before any I2C adapter driver is
+ * registered. For example, mainboard init code could define several devices,
+ * as could the init code for each daughtercard in a board stack.
+ *
+ * The I2C devices will be created later, after the adapter for the relevant
+ * bus has been registered. After that moment, standard driver model tools
+ * are used to bind "new style" I2C drivers to the devices. The bus number
+ * for any device declared using this routine is not available for dynamic
+ * allocation.
+ *
+ * The board info passed can safely be __initdata, but be careful of embedded
+ * pointers (for platform_data, functions, etc) since that won't be copied.
+ */
+int __init
+i2c_register_board_info(int busnum,
+ struct i2c_board_info const *info, unsigned len)
+{
+ int status;
+
+ mutex_lock(&__i2c_board_lock);
+
+ /* dynamic bus numbers will be assigned after the last static one */
+ if (busnum >= __i2c_first_dynamic_bus_num)
+ __i2c_first_dynamic_bus_num = busnum + 1;
+
+ for (status = 0; len; len--, info++) {
+ struct i2c_devinfo *devinfo;
+
+ devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
+ if (!devinfo) {
+ pr_debug("i2c-core: can't register boardinfo!\n");
+ status = -ENOMEM;
+ break;
+ }
+
+ devinfo->busnum = busnum;
+ devinfo->board_info = *info;
+ list_add_tail(&devinfo->list, &__i2c_board_list);
+ }
+
+ mutex_unlock(&__i2c_board_lock);
+
+ return status;
+}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 21fe1406c8b..64f8e56d300 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -35,29 +35,92 @@
#include <linux/completion.h>
#include <asm/uaccess.h>
+#include "i2c-core.h"
+
static LIST_HEAD(adapters);
static LIST_HEAD(drivers);
static DEFINE_MUTEX(core_lists);
static DEFINE_IDR(i2c_adapter_idr);
+#define is_newstyle_driver(d) ((d)->probe || (d)->remove)
/* ------------------------------------------------------------------------- */
-/* match always succeeds, as we want the probe() to tell if we really accept this match */
static int i2c_device_match(struct device *dev, struct device_driver *drv)
{
- return 1;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_driver *driver = to_i2c_driver(drv);
+
+ /* make legacy i2c drivers bypass driver model probing entirely;
+ * such drivers scan each i2c adapter/bus themselves.
+ */
+ if (!is_newstyle_driver(driver))
+ return 0;
+
+ /* new style drivers use the same kind of driver matching policy
+ * as platform devices or SPI: compare device and driver IDs.
+ */
+ return strcmp(client->driver_name, drv->name) == 0;
+}
+
+#ifdef CONFIG_HOTPLUG
+
+/* uevent helps with hotplug: modprobe -q $(MODALIAS) */
+static int i2c_device_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int i = 0, length = 0;
+
+ /* by definition, legacy drivers can't hotplug */
+ if (dev->driver || !client->driver_name)
+ return 0;
+
+ if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
+ "MODALIAS=%s", client->driver_name))
+ return -ENOMEM;
+ envp[i] = NULL;
+ dev_dbg(dev, "uevent\n");
+ return 0;
}
+#else
+#define i2c_device_uevent NULL
+#endif /* CONFIG_HOTPLUG */
+
static int i2c_device_probe(struct device *dev)
{
- return -ENODEV;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_driver *driver = to_i2c_driver(dev->driver);
+
+ if (!driver->probe)
+ return -ENODEV;
+ client->driver = driver;
+ dev_dbg(dev, "probe\n");
+ return driver->probe(client);
}
static int i2c_device_remove(struct device *dev)
{
- return 0;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_driver *driver;
+ int status;
+
+ if (!dev->driver)
+ return 0;
+
+ driver = to_i2c_driver(dev->driver);
+ if (driver->remove) {
+ dev_dbg(dev, "remove\n");
+ status = driver->remove(client);
+ } else {
+ dev->driver = NULL;
+ status = 0;
+ }
+ if (status == 0)
+ client->driver = NULL;
+ return status;
}
static void i2c_device_shutdown(struct device *dev)
@@ -95,122 +158,184 @@ static int i2c_device_resume(struct device * dev)
return driver->resume(to_i2c_client(dev));
}
+static void i2c_client_release(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ complete(&client->released);
+}
+
+static void i2c_client_dev_release(struct device *dev)
+{
+ kfree(to_i2c_client(dev));
+}
+
+static ssize_t show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%s\n", client->name);
+}
+
+static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return client->driver_name
+ ? sprintf(buf, "%s\n", client->driver_name)
+ : 0;
+}
+
+static struct device_attribute i2c_dev_attrs[] = {
+ __ATTR(name, S_IRUGO, show_client_name, NULL),
+ /* modalias helps coldplug: modprobe $(cat .../modalias) */
+ __ATTR(modalias, S_IRUGO, show_modalias, NULL),
+ { },
+};
+
struct bus_type i2c_bus_type = {
.name = "i2c",
+ .dev_attrs = i2c_dev_attrs,
.match = i2c_device_match,
+ .uevent = i2c_device_uevent,
.probe = i2c_device_probe,
.remove = i2c_device_remove,
.shutdown = i2c_device_shutdown,
.suspend = i2c_device_suspend,
.resume = i2c_device_resume,
};
+EXPORT_SYMBOL_GPL(i2c_bus_type);
-/* ------------------------------------------------------------------------- */
+/**
+ * i2c_new_device - instantiate an i2c device for use with a new style driver
+ * @adap: the adapter managing the device
+ * @info: describes one I2C device; bus_num is ignored
+ *
+ * Create a device to work with a new style i2c driver, where binding is
+ * handled through driver model probe()/remove() methods. This call is not
+ * appropriate for use by mainboad initialization logic, which usually runs
+ * during an arch_initcall() long before any i2c_adapter could exist.
+ *
+ * This returns the new i2c client, which may be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *
+i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
+{
+ struct i2c_client *client;
+ int status;
-void i2c_adapter_dev_release(struct device *dev)
+ client = kzalloc(sizeof *client, GFP_KERNEL);
+ if (!client)
+ return NULL;
+
+ client->adapter = adap;
+
+ client->dev.platform_data = info->platform_data;
+ client->flags = info->flags;
+ client->addr = info->addr;
+ client->irq = info->irq;
+
+ strlcpy(client->driver_name, info->driver_name,
+ sizeof(client->driver_name));
+ strlcpy(client->name, info->type, sizeof(client->name));
+
+ /* a new style driver may be bound to this device when we
+ * return from this function, or any later moment (e.g. maybe
+ * hotplugging will load the driver module). and the device
+ * refcount model is the standard driver model one.
+ */
+ status = i2c_attach_client(client);
+ if (status < 0) {
+ kfree(client);
+ client = NULL;
+ }
+ return client;
+}
+EXPORT_SYMBOL_GPL(i2c_new_device);
+
+
+/**
+ * i2c_unregister_device - reverse effect of i2c_new_device()
+ * @client: value returned from i2c_new_device()
+ */
+void i2c_unregister_device(struct i2c_client *client)
{
- struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
- complete(&adap->dev_released);
+ struct i2c_adapter *adapter = client->adapter;
+ struct i2c_driver *driver = client->driver;
+
+ if (driver && !is_newstyle_driver(driver)) {
+ dev_err(&client->dev, "can't unregister devices "
+ "with legacy drivers\n");
+ WARN_ON(1);
+ return;
+ }
+
+ mutex_lock(&adapter->clist_lock);
+ list_del(&client->list);
+ mutex_unlock(&adapter->clist_lock);
+
+ device_unregister(&client->dev);
}
+EXPORT_SYMBOL_GPL(i2c_unregister_device);
-struct device_driver i2c_adapter_driver = {
- .owner = THIS_MODULE,
- .name = "i2c_adapter",
- .bus = &i2c_bus_type,
-};
/* ------------------------------------------------------------------------- */
/* I2C bus adapters -- one roots each I2C or SMBUS segment */
-static void i2c_adapter_class_dev_release(struct class_device *dev)
+void i2c_adapter_dev_release(struct device *dev)
{
- struct i2c_adapter *adap = class_dev_to_i2c_adapter(dev);
- complete(&adap->class_dev_released);
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
+ complete(&adap->dev_released);
}
+EXPORT_SYMBOL_GPL(i2c_adapter_dev_release); /* exported to i2c-isa */
-static ssize_t i2c_adapter_show_name(struct class_device *cdev, char *buf)
+static ssize_t
+show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct i2c_adapter *adap = class_dev_to_i2c_adapter(cdev);
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
return sprintf(buf, "%s\n", adap->name);
}
-static struct class_device_attribute i2c_adapter_attrs[] = {
- __ATTR(name, S_IRUGO, i2c_adapter_show_name, NULL),
+static struct device_attribute i2c_adapter_attrs[] = {
+ __ATTR(name, S_IRUGO, show_adapter_name, NULL),
{ },
};
struct class i2c_adapter_class = {
.owner = THIS_MODULE,
.name = "i2c-adapter",
- .class_dev_attrs = i2c_adapter_attrs,
- .release = &i2c_adapter_class_dev_release,
+ .dev_attrs = i2c_adapter_attrs,
};
+EXPORT_SYMBOL_GPL(i2c_adapter_class); /* exported to i2c-isa */
-static ssize_t show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
- return sprintf(buf, "%s\n", adap->name);
-}
-static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
-
-
-static void i2c_client_release(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- complete(&client->released);
-}
-
-static ssize_t show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
+static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
{
- struct i2c_client *client = to_i2c_client(dev);
- return sprintf(buf, "%s\n", client->name);
+ struct i2c_devinfo *devinfo;
+
+ mutex_lock(&__i2c_board_lock);
+ list_for_each_entry(devinfo, &__i2c_board_list, list) {
+ if (devinfo->busnum == adapter->nr
+ && !i2c_new_device(adapter,
+ &devinfo->board_info))
+ printk(KERN_ERR "i2c-core: can't create i2c%d-%04x\n",
+ i2c_adapter_id(adapter),
+ devinfo->board_info.addr);
+ }
+ mutex_unlock(&__i2c_board_lock);
}
-/*
- * We can't use the DEVICE_ATTR() macro here, as we used the same name for
- * an i2c adapter attribute (above).
- */
-static struct device_attribute dev_attr_client_name =
- __ATTR(name, S_IRUGO, &show_client_name, NULL);
-
-
-/* ---------------------------------------------------
- * registering functions
- * ---------------------------------------------------
- */
-
-/* -----
- * i2c_add_adapter is called from within the algorithm layer,
- * when a new hw adapter registers. A new device is register to be
- * available for clients.
- */
-int i2c_add_adapter(struct i2c_adapter *adap)
+static int i2c_register_adapter(struct i2c_adapter *adap)
{
- int id, res = 0;
+ int res = 0;
struct list_head *item;
struct i2c_driver *driver;
- mutex_lock(&core_lists);
-
- if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) {
- res = -ENOMEM;
- goto out_unlock;
- }
-
- res = idr_get_new(&i2c_adapter_idr, adap, &id);
- if (res < 0) {
- if (res == -EAGAIN)
- res = -ENOMEM;
- goto out_unlock;
- }
-
- adap->nr = id & MAX_ID_MASK;
mutex_init(&adap->bus_lock);
mutex_init(&adap->clist_lock);
- list_add_tail(&adap->list,&adapters);
INIT_LIST_HEAD(&adap->clients);
+ mutex_lock(&core_lists);
+ list_add_tail(&adap->list, &adapters);
+
/* Add the adapter to the driver core.
* If the parent pointer is not set up,
* we add this adapter to the host bus.
@@ -221,27 +346,19 @@ int i2c_add_adapter(struct i2c_adapter *adap)
"physical device\n", adap->name);
}
sprintf(adap->dev.bus_id, "i2c-%d", adap->nr);
- adap->dev.driver = &i2c_adapter_driver;
adap->dev.release = &i2c_adapter_dev_release;
+ adap->dev.class = &i2c_adapter_class;
res = device_register(&adap->dev);
if (res)
goto out_list;
- res = device_create_file(&adap->dev, &dev_attr_name);
- if (res)
- goto out_unregister;
-
- /* Add this adapter to the i2c_adapter class */
- memset(&adap->class_dev, 0x00, sizeof(struct class_device));
- adap->class_dev.dev = &adap->dev;
- adap->class_dev.class = &i2c_adapter_class;
- strlcpy(adap->class_dev.class_id, adap->dev.bus_id, BUS_ID_SIZE);
- res = class_device_register(&adap->class_dev);
- if (res)
- goto out_remove_name;
dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
- /* inform drivers of new adapters */
+ /* create pre-declared device nodes for new-style drivers */
+ if (adap->nr < __i2c_first_dynamic_bus_num)
+ i2c_scan_static_board_info(adap);
+
+ /* let legacy drivers scan this bus for matching devices */
list_for_each(item,&drivers) {
driver = list_entry(item, struct i2c_driver, list);
if (driver->attach_adapter)
@@ -253,18 +370,98 @@ out_unlock:
mutex_unlock(&core_lists);
return res;
-out_remove_name:
- device_remove_file(&adap->dev, &dev_attr_name);
-out_unregister:
- init_completion(&adap->dev_released); /* Needed? */
- device_unregister(&adap->dev);
- wait_for_completion(&adap->dev_released);
out_list:
list_del(&adap->list);
idr_remove(&i2c_adapter_idr, adap->nr);
goto out_unlock;
}
+/**
+ * i2c_add_adapter - declare i2c adapter, use dynamic bus number
+ * @adapter: the adapter to add
+ *
+ * This routine is used to declare an I2C adapter when its bus number
+ * doesn't matter. Examples: for I2C adapters dynamically added by
+ * USB links or PCI plugin cards.
+ *
+ * When this returns zero, a new bus number was allocated and stored
+ * in adap->nr, and the specified adapter became available for clients.
+ * Otherwise, a negative errno value is returned.
+ */
+int i2c_add_adapter(struct i2c_adapter *adapter)
+{
+ int id, res = 0;
+
+retry:
+ if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0)
+ return -ENOMEM;
+
+ mutex_lock(&core_lists);
+ /* "above" here means "above or equal to", sigh */
+ res = idr_get_new_above(&i2c_adapter_idr, adapter,
+ __i2c_first_dynamic_bus_num, &id);
+ mutex_unlock(&core_lists);
+
+ if (res < 0) {
+ if (res == -EAGAIN)
+ goto retry;
+ return res;
+ }
+
+ adapter->nr = id;
+ return i2c_register_adapter(adapter);
+}
+EXPORT_SYMBOL(i2c_add_adapter);
+
+/**
+ * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
+ * @adap: the adapter to register (with adap->nr initialized)
+ *
+ * This routine is used to declare an I2C adapter when its bus number
+ * matters. Example: for I2C adapters from system-on-chip CPUs, or
+ * otherwise built in to the system's mainboard, and where i2c_board_info
+ * is used to properly configure I2C devices.
+ *
+ * If no devices have pre-been declared for this bus, then be sure to
+ * register the adapter before any dynamically allocated ones. Otherwise
+ * the required bus ID may not be available.
+ *
+ * When this returns zero, the specified adapter became available for
+ * clients using the bus number provided in adap->nr. Also, the table
+ * of I2C devices pre-declared using i2c_register_board_info() is scanned,
+ * and the appropriate driver model device nodes are created. Otherwise, a
+ * negative errno value is returned.
+ */
+int i2c_add_numbered_adapter(struct i2c_adapter *adap)
+{
+ int id;
+ int status;
+
+ if (adap->nr & ~MAX_ID_MASK)
+ return -EINVAL;
+
+retry:
+ if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0)
+ return -ENOMEM;
+
+ mutex_lock(&core_lists);
+ /* "above" here means "above or equal to", sigh;
+ * we need the "equal to" result to force the result
+ */
+ status = idr_get_new_above(&i2c_adapter_idr, adap, adap->nr, &id);
+ if (status == 0 && id != adap->nr) {
+ status = -EBUSY;
+ idr_remove(&i2c_adapter_idr, id);
+ }
+ mutex_unlock(&core_lists);
+ if (status == -EAGAIN)
+ goto retry;
+
+ if (status == 0)
+ status = i2c_register_adapter(adap);
+ return status;
+}
+EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
int i2c_del_adapter(struct i2c_adapter *adap)
{
@@ -302,9 +499,19 @@ int i2c_del_adapter(struct i2c_adapter *adap)
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
list_for_each_safe(item, _n, &adap->clients) {
+ struct i2c_driver *driver;
+
client = list_entry(item, struct i2c_client, list);
+ driver = client->driver;
+
+ /* new style, follow standard driver model */
+ if (!driver || is_newstyle_driver(driver)) {
+ i2c_unregister_device(client);
+ continue;
+ }
- if ((res=client->driver->detach_client(client))) {
+ /* legacy drivers create and remove clients themselves */
+ if ((res = driver->detach_client(client))) {
dev_err(&adap->dev, "detach_client failed for client "
"[%s] at address 0x%02x\n", client->name,
client->addr);
@@ -314,17 +521,13 @@ int i2c_del_adapter(struct i2c_adapter *adap)
/* clean up the sysfs representation */
init_completion(&adap->dev_released);
- init_completion(&adap->class_dev_released);
- class_device_unregister(&adap->class_dev);
- device_remove_file(&adap->dev, &dev_attr_name);
device_unregister(&adap->dev);
list_del(&adap->list);
/* wait for sysfs to drop all references */
wait_for_completion(&adap->dev_released);
- wait_for_completion(&adap->class_dev_released);
- /* free dynamically allocated bus id */
+ /* free bus id */
idr_remove(&i2c_adapter_idr, adap->nr);
dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
@@ -333,24 +536,42 @@ int i2c_del_adapter(struct i2c_adapter *adap)
mutex_unlock(&core_lists);
return res;
}
+EXPORT_SYMBOL(i2c_del_adapter);
+
+/* ------------------------------------------------------------------------- */
-/* -----
- * What follows is the "upwards" interface: commands for talking to clients,
- * which implement the functions to access the physical information of the
- * chips.
+/*
+ * An i2c_driver is used with one or more i2c_client (device) nodes to access
+ * i2c slave chips, on a bus instance associated with some i2c_adapter. There
+ * are two models for binding the driver to its device: "new style" drivers
+ * follow the standard Linux driver model and just respond to probe() calls
+ * issued if the driver core sees they match(); "legacy" drivers create device
+ * nodes themselves.
*/
int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
{
- struct list_head *item;
- struct i2c_adapter *adapter;
int res;
+ /* new style driver methods can't mix with legacy ones */
+ if (is_newstyle_driver(driver)) {
+ if (driver->attach_adapter || driver->detach_adapter
+ || driver->detach_client) {
+ printk(KERN_WARNING
+ "i2c-core: driver [%s] is confused\n",
+ driver->driver.name);
+ return -EINVAL;
+ }
+ }
+
/* add the driver to the list of i2c drivers in the driver core */
driver->driver.owner = owner;
driver->driver.bus = &i2c_bus_type;
+ /* for new style drivers, when registration returns the driver core
+ * will have called probe() for all matching-but-unbound devices.
+ */
res = driver_register(&driver->driver);
if (res)
return res;
@@ -360,10 +581,11 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
list_add_tail(&driver->list,&drivers);
pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
- /* now look for instances of driver on our adapters */
+ /* legacy drivers scan i2c busses directly */
if (driver->attach_adapter) {
- list_for_each(item,&adapters) {
- adapter = list_entry(item, struct i2c_adapter, list);
+ struct i2c_adapter *adapter;
+
+ list_for_each_entry(adapter, &adapters, list) {
driver->attach_adapter(adapter);
}
}
@@ -373,16 +595,22 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
}
EXPORT_SYMBOL(i2c_register_driver);
-int i2c_del_driver(struct i2c_driver *driver)
+/**
+ * i2c_del_driver - unregister I2C driver
+ * @driver: the driver being unregistered
+ */
+void i2c_del_driver(struct i2c_driver *driver)
{
struct list_head *item1, *item2, *_n;
struct i2c_client *client;
struct i2c_adapter *adap;
- int res = 0;
-
mutex_lock(&core_lists);
+ /* new-style driver? */
+ if (is_newstyle_driver(driver))
+ goto unregister;
+
/* Have a look at each adapter, if clients of this driver are still
* attached. If so, detach them to be able to kill the driver
* afterwards.
@@ -390,11 +618,10 @@ int i2c_del_driver(struct i2c_driver *driver)
list_for_each(item1,&adapters) {
adap = list_entry(item1, struct i2c_adapter, list);
if (driver->detach_adapter) {
- if ((res = driver->detach_adapter(adap))) {
+ if (driver->detach_adapter(adap)) {
dev_err(&adap->dev, "detach_adapter failed "
"for driver [%s]\n",
driver->driver.name);
- goto out_unlock;
}
} else {
list_for_each_safe(item2, _n, &adap->clients) {
@@ -404,25 +631,26 @@ int i2c_del_driver(struct i2c_driver *driver)
dev_dbg(&adap->dev, "detaching client [%s] "
"at 0x%02x\n", client->name,
client->addr);
- if ((res = driver->detach_client(client))) {
+ if (driver->detach_client(client)) {
dev_err(&adap->dev, "detach_client "
"failed for client [%s] at "
"0x%02x\n", client->name,
client->addr);
- goto out_unlock;
}
}
}
}
+ unregister:
driver_unregister(&driver->driver);
list_del(&driver->list);
pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
- out_unlock:
mutex_unlock(&core_lists);
- return 0;
}
+EXPORT_SYMBOL(i2c_del_driver);
+
+/* ------------------------------------------------------------------------- */
static int __i2c_check_addr(struct i2c_adapter *adapter, unsigned int addr)
{
@@ -447,6 +675,7 @@ int i2c_check_addr(struct i2c_adapter *adapter, int addr)
return rval;
}
+EXPORT_SYMBOL(i2c_check_addr);
int i2c_attach_client(struct i2c_client *client)
{
@@ -463,9 +692,15 @@ int i2c_attach_client(struct i2c_client *client)
client->usage_count = 0;
client->dev.parent = &client->adapter->dev;
- client->dev.driver = &client->driver->driver;
client->dev.bus = &i2c_bus_type;
- client->dev.release = &i2c_client_release;
+
+ if (client->driver)
+ client->dev.driver = &client->driver->driver;
+
+ if (client->driver && !is_newstyle_driver(client->driver))
+ client->dev.release = i2c_client_release;
+ else
+ client->dev.release = i2c_client_dev_release;
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
@@ -474,9 +709,6 @@ int i2c_attach_client(struct i2c_client *client)
res = device_register(&client->dev);
if (res)
goto out_list;
- res = device_create_file(&client->dev, &dev_attr_client_name);
- if (res)
- goto out_unregister;
mutex_unlock(&adapter->clist_lock);
if (adapter->client_register) {
@@ -489,10 +721,6 @@ int i2c_attach_client(struct i2c_client *client)
return 0;
-out_unregister:
- init_completion(&client->released); /* Needed? */
- device_unregister(&client->dev);
- wait_for_completion(&client->released);
out_list:
list_del(&client->list);
dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x "
@@ -501,7 +729,7 @@ out_unlock:
mutex_unlock(&adapter->clist_lock);
return res;
}
-
+EXPORT_SYMBOL(i2c_attach_client);
int i2c_detach_client(struct i2c_client *client)
{
@@ -527,7 +755,6 @@ int i2c_detach_client(struct i2c_client *client)
mutex_lock(&adapter->clist_lock);
list_del(&client->list);
init_completion(&client->released);
- device_remove_file(&client->dev, &dev_attr_client_name);
device_unregister(&client->dev);
mutex_unlock(&adapter->clist_lock);
wait_for_completion(&client->released);
@@ -535,6 +762,7 @@ int i2c_detach_client(struct i2c_client *client)
out:
return res;
}
+EXPORT_SYMBOL(i2c_detach_client);
static int i2c_inc_use_client(struct i2c_client *client)
{
@@ -567,6 +795,7 @@ int i2c_use_client(struct i2c_client *client)
return 0;
}
+EXPORT_SYMBOL(i2c_use_client);
int i2c_release_client(struct i2c_client *client)
{
@@ -581,6 +810,7 @@ int i2c_release_client(struct i2c_client *client)
return 0;
}
+EXPORT_SYMBOL(i2c_release_client);
void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
{
@@ -601,6 +831,7 @@ void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
}
mutex_unlock(&adap->clist_lock);
}
+EXPORT_SYMBOL(i2c_clients_command);
static int __init i2c_init(void)
{
@@ -609,16 +840,12 @@ static int __init i2c_init(void)
retval = bus_register(&i2c_bus_type);
if (retval)
return retval;
- retval = driver_register(&i2c_adapter_driver);
- if (retval)
- return retval;
return class_register(&i2c_adapter_class);
}
static void __exit i2c_exit(void)
{
class_unregister(&i2c_adapter_class);
- driver_unregister(&i2c_adapter_driver);
bus_unregister(&i2c_bus_type);
}
@@ -638,8 +865,9 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num)
#ifdef DEBUG
for (ret = 0; ret < num; ret++) {
dev_dbg(&adap->dev, "master_xfer[%d] %c, addr=0x%02x, "
- "len=%d\n", ret, msgs[ret].flags & I2C_M_RD ?
- 'R' : 'W', msgs[ret].addr, msgs[ret].len);
+ "len=%d%s\n", ret, (msgs[ret].flags & I2C_M_RD)
+ ? 'R' : 'W', msgs[ret].addr, msgs[ret].len,
+ (msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
}
#endif
@@ -653,6 +881,7 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num)
return -ENOSYS;
}
}
+EXPORT_SYMBOL(i2c_transfer);
int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
{
@@ -671,6 +900,7 @@ int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
transmitted, else error code. */
return (ret == 1) ? count : ret;
}
+EXPORT_SYMBOL(i2c_master_send);
int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
{
@@ -690,7 +920,7 @@ int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
transmitted, else error code. */
return (ret == 1) ? count : ret;
}
-
+EXPORT_SYMBOL(i2c_master_recv);
int i2c_control(struct i2c_client *client,
unsigned int cmd, unsigned long arg)
@@ -712,6 +942,7 @@ int i2c_control(struct i2c_client *client,
}
return ret;
}
+EXPORT_SYMBOL(i2c_control);
/* ----------------------------------------------------
* the i2c address scanning function
@@ -853,6 +1084,70 @@ int i2c_probe(struct i2c_adapter *adapter,
return 0;
}
+EXPORT_SYMBOL(i2c_probe);
+
+struct i2c_client *
+i2c_new_probed_device(struct i2c_adapter *adap,
+ struct i2c_board_info *info,
+ unsigned short const *addr_list)
+{
+ int i;
+
+ /* Stop here if the bus doesn't support probing */
+ if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE)) {
+ dev_err(&adap->dev, "Probing not supported\n");
+ return NULL;
+ }
+
+ mutex_lock(&adap->clist_lock);
+ for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
+ /* Check address validity */
+ if (addr_list[i] < 0x03 || addr_list[i] > 0x77) {
+ dev_warn(&adap->dev, "Invalid 7-bit address "
+ "0x%02x\n", addr_list[i]);
+ continue;
+ }
+
+ /* Check address availability */
+ if (__i2c_check_addr(adap, addr_list[i])) {
+ dev_dbg(&adap->dev, "Address 0x%02x already in "
+ "use, not probing\n", addr_list[i]);
+ continue;
+ }
+
+ /* Test address responsiveness
+ The default probe method is a quick write, but it is known
+ to corrupt the 24RF08 EEPROMs due to a state machine bug,
+ and could also irreversibly write-protect some EEPROMs, so
+ for address ranges 0x30-0x37 and 0x50-0x5f, we use a byte
+ read instead. Also, some bus drivers don't implement
+ quick write, so we fallback to a byte read it that case
+ too. */
+ if ((addr_list[i] & ~0x07) == 0x30
+ || (addr_list[i] & ~0x0f) == 0x50
+ || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
+ if (i2c_smbus_xfer(adap, addr_list[i], 0,
+ I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE, NULL) >= 0)
+ break;
+ } else {
+ if (i2c_smbus_xfer(adap, addr_list[i], 0,
+ I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL) >= 0)
+ break;
+ }
+ }
+ mutex_unlock(&adap->clist_lock);
+
+ if (addr_list[i] == I2C_CLIENT_END) {
+ dev_dbg(&adap->dev, "Probing failed, no device found\n");
+ return NULL;
+ }
+
+ info->addr = addr_list[i];
+ return i2c_new_device(adap, info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_probed_device);
struct i2c_adapter* i2c_get_adapter(int id)
{
@@ -866,11 +1161,13 @@ struct i2c_adapter* i2c_get_adapter(int id)
mutex_unlock(&core_lists);
return adapter;
}
+EXPORT_SYMBOL(i2c_get_adapter);
void i2c_put_adapter(struct i2c_adapter *adap)
{
module_put(adap->owner);
}
+EXPORT_SYMBOL(i2c_put_adapter);
/* The SMBus parts */
@@ -939,6 +1236,7 @@ s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
value,0,I2C_SMBUS_QUICK,NULL);
}
+EXPORT_SYMBOL(i2c_smbus_write_quick);
s32 i2c_smbus_read_byte(struct i2c_client *client)
{
@@ -949,12 +1247,14 @@ s32 i2c_smbus_read_byte(struct i2c_client *client)
else
return data.byte;
}
+EXPORT_SYMBOL(i2c_smbus_read_byte);
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
}
+EXPORT_SYMBOL(i2c_smbus_write_byte);
s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
{
@@ -965,6 +1265,7 @@ s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
else
return data.byte;
}
+EXPORT_SYMBOL(i2c_smbus_read_byte_data);
s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
{
@@ -974,6 +1275,7 @@ s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
I2C_SMBUS_WRITE,command,
I2C_SMBUS_BYTE_DATA,&data);
}
+EXPORT_SYMBOL(i2c_smbus_write_byte_data);
s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command)
{
@@ -984,6 +1286,7 @@ s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command)
else
return data.word;
}
+EXPORT_SYMBOL(i2c_smbus_read_word_data);
s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
{
@@ -993,6 +1296,23 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
I2C_SMBUS_WRITE,command,
I2C_SMBUS_WORD_DATA,&data);
}
+EXPORT_SYMBOL(i2c_smbus_write_word_data);
+
+/* Returns the number of read bytes */
+s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command,
+ u8 *values)
+{
+ union i2c_smbus_data data;
+
+ if (i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_BLOCK_DATA, &data))
+ return -1;
+
+ memcpy(values, &data.block[1], data.block[0]);
+ return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_block_data);
s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
u8 length, const u8 *values)
@@ -1007,6 +1327,7 @@ s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
I2C_SMBUS_WRITE,command,
I2C_SMBUS_BLOCK_DATA,&data);
}
+EXPORT_SYMBOL(i2c_smbus_write_block_data);
/* Returns the number of read bytes */
s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values)
@@ -1021,6 +1342,7 @@ s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *val
memcpy(values, &data.block[1], data.block[0]);
return data.block[0];
}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
u8 length, const u8 *values)
@@ -1035,6 +1357,7 @@ s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
I2C_SMBUS_WRITE, command,
I2C_SMBUS_I2C_BLOCK_DATA, &data);
}
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
@@ -1098,9 +1421,9 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
- dev_err(&adapter->dev, "Block read not supported "
- "under I2C emulation!\n");
- return -1;
+ msg[1].flags |= I2C_M_RECV_LEN;
+ msg[1].len = 1; /* block length will be added by
+ the underlying bus driver */
} else {
msg[0].len = data->block[0] + 2;
if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
@@ -1114,9 +1437,21 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
}
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- dev_dbg(&adapter->dev, "Block process call not supported "
- "under I2C emulation!\n");
- return -1;
+ num = 2; /* Another special case */
+ read_write = I2C_SMBUS_READ;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&adapter->dev, "%s called with invalid "
+ "block proc call size (%d)\n", __FUNCTION__,
+ data->block[0]);
+ return -1;
+ }
+ msg[0].len = data->block[0] + 2;
+ for (i = 1; i < msg[0].len; i++)
+ msgbuf0[i] = data->block[i-1];
+ msg[1].flags |= I2C_M_RECV_LEN;
+ msg[1].len = 1; /* block length will be added by
+ the underlying bus driver */
+ break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
msg[1].len = I2C_SMBUS_BLOCK_MAX;
@@ -1180,6 +1515,11 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
data->block[i+1] = msgbuf1[i];
break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ for (i = 0; i < msgbuf1[0] + 1; i++)
+ data->block[i] = msgbuf1[i];
+ break;
}
return 0;
}
@@ -1204,43 +1544,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
return res;
}
-
-
-/* Next four are needed by i2c-isa */
-EXPORT_SYMBOL_GPL(i2c_adapter_dev_release);
-EXPORT_SYMBOL_GPL(i2c_adapter_driver);
-EXPORT_SYMBOL_GPL(i2c_adapter_class);
-EXPORT_SYMBOL_GPL(i2c_bus_type);
-
-EXPORT_SYMBOL(i2c_add_adapter);
-EXPORT_SYMBOL(i2c_del_adapter);
-EXPORT_SYMBOL(i2c_del_driver);
-EXPORT_SYMBOL(i2c_attach_client);
-EXPORT_SYMBOL(i2c_detach_client);
-EXPORT_SYMBOL(i2c_use_client);
-EXPORT_SYMBOL(i2c_release_client);
-EXPORT_SYMBOL(i2c_clients_command);
-EXPORT_SYMBOL(i2c_check_addr);
-
-EXPORT_SYMBOL(i2c_master_send);
-EXPORT_SYMBOL(i2c_master_recv);
-EXPORT_SYMBOL(i2c_control);
-EXPORT_SYMBOL(i2c_transfer);
-EXPORT_SYMBOL(i2c_get_adapter);
-EXPORT_SYMBOL(i2c_put_adapter);
-EXPORT_SYMBOL(i2c_probe);
-
EXPORT_SYMBOL(i2c_smbus_xfer);
-EXPORT_SYMBOL(i2c_smbus_write_quick);
-EXPORT_SYMBOL(i2c_smbus_read_byte);
-EXPORT_SYMBOL(i2c_smbus_write_byte);
-EXPORT_SYMBOL(i2c_smbus_read_byte_data);
-EXPORT_SYMBOL(i2c_smbus_write_byte_data);
-EXPORT_SYMBOL(i2c_smbus_read_word_data);
-EXPORT_SYMBOL(i2c_smbus_write_word_data);
-EXPORT_SYMBOL(i2c_smbus_write_block_data);
-EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
-EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
new file mode 100644
index 00000000000..cd5bff87485
--- /dev/null
+++ b/drivers/i2c/i2c-core.h
@@ -0,0 +1,31 @@
+/*
+ * i2c-core.h - interfaces internal to the I2C framework
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+struct i2c_devinfo {
+ struct list_head list;
+ int busnum;
+ struct i2c_board_info board_info;
+};
+
+/* board_lock protects board_list and first_dynamic_bus_num.
+ * only i2c core components are allowed to use these symbols.
+ */
+extern struct mutex __i2c_board_lock;
+extern struct list_head __i2c_board_list;
+extern int __i2c_first_dynamic_bus_num;
+