aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/chips/Kconfig10
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/chips/ds1682.c267
3 files changed, 0 insertions, 278 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index f9618f4d4e4..ae4539d99be 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -6,16 +6,6 @@
menu "Miscellaneous I2C Chip support"
-config DS1682
- tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
- depends on EXPERIMENTAL
- help
- If you say yes here you get support for Dallas Semiconductor
- DS1682 Total Elapsed Time Recorder.
-
- This driver can also be built as a module. If so, the module
- will be called ds1682.
-
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 749cf360629..fe0af0f81f2 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -10,7 +10,6 @@
# * I/O expander drivers go to drivers/gpio
#
-obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c
deleted file mode 100644
index f3ee4a1abb7..00000000000
--- a/drivers/i2c/chips/ds1682.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
- *
- * Written by: Grant Likely <grant.likely@secretlab.ca>
- *
- * Copyright (C) 2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * The DS1682 elapsed timer recorder is a simple device that implements
- * one elapsed time counter, one event counter, an alarm signal and 10
- * bytes of general purpose EEPROM.
- *
- * This driver provides access to the DS1682 counters and user data via
- * the sysfs. The following attributes are added to the device node:
- * elapsed_time (u32): Total elapsed event time in ms resolution
- * alarm_time (u32): When elapsed time exceeds the value in alarm_time,
- * then the alarm pin is asserted.
- * event_count (u16): number of times the event pin has gone low.
- * eeprom (u8[10]): general purpose EEPROM
- *
- * Counter registers and user data are both read/write unless the device
- * has been write protected. This driver does not support turning off write
- * protection. Once write protection is turned on, it is impossible to
- * turn it off again, so I have left the feature out of this driver to avoid
- * accidental enabling, but it is trivial to add write protect support.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/string.h>
-#include <linux/list.h>
-#include <linux/sysfs.h>
-#include <linux/ctype.h>
-#include <linux/hwmon-sysfs.h>
-
-/* Device registers */
-#define DS1682_REG_CONFIG 0x00
-#define DS1682_REG_ALARM 0x01
-#define DS1682_REG_ELAPSED 0x05
-#define DS1682_REG_EVT_CNTR 0x09
-#define DS1682_REG_EEPROM 0x0b
-#define DS1682_REG_RESET 0x1d
-#define DS1682_REG_WRITE_DISABLE 0x1e
-#define DS1682_REG_WRITE_MEM_DISABLE 0x1f
-
-#define DS1682_EEPROM_SIZE 10
-
-/*
- * Generic counter attributes
- */
-static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
- struct i2c_client *client = to_i2c_client(dev);
- __le32 val = 0;
- int rc;
-
- dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
-
- /* Read the register */
- rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr,
- (u8 *) & val);
- if (rc < 0)
- return -EIO;
-
- /* Special case: the 32 bit regs are time values with 1/4s
- * resolution, scale them up to milliseconds */
- if (sattr->nr == 4)
- return sprintf(buf, "%llu\n",
- ((unsigned long long)le32_to_cpu(val)) * 250);
-
- /* Format the output string and return # of bytes */
- return sprintf(buf, "%li\n", (long)le32_to_cpu(val));
-}
-
-static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
- struct i2c_client *client = to_i2c_client(dev);
- char *endp;
- u64 val;
- __le32 val_le;
- int rc;
-
- dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
-
- /* Decode input */
- val = simple_strtoull(buf, &endp, 0);
- if (buf == endp) {
- dev_dbg(dev, "input string not a number\n");
- return -EINVAL;
- }
-
- /* Special case: the 32 bit regs are time values with 1/4s
- * resolution, scale input down to quarter-seconds */
- if (sattr->nr == 4)
- do_div(val, 250);
-
- /* write out the value */
- val_le = cpu_to_le32(val);
- rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
- (u8 *) & val_le);
- if (rc < 0) {
- dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
- sattr->index, sattr->nr);
- return -EIO;
- }
-
- return count;
-}
-
-/*
- * Simple register attributes
- */
-static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
- ds1682_store, 4, DS1682_REG_ELAPSED);
-static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show,
- ds1682_store, 4, DS1682_REG_ALARM);
-static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show,
- ds1682_store, 2, DS1682_REG_EVT_CNTR);
-
-static const struct attribute_group ds1682_group = {
- .attrs = (struct attribute *[]) {
- &sensor_dev_attr_elapsed_time.dev_attr.attr,
- &sensor_dev_attr_alarm_time.dev_attr.attr,
- &sensor_dev_attr_event_count.dev_attr.attr,
- NULL,
- },
-};
-
-/*
- * User data attribute
- */
-static ssize_t ds1682_eeprom_read(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct i2c_client *client = kobj_to_i2c_client(kobj);
- int rc;
-
- dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n",
- buf, off, count);
-
- if (off >= DS1682_EEPROM_SIZE)
- return 0;
-
- if (off + count > DS1682_EEPROM_SIZE)
- count = DS1682_EEPROM_SIZE - off;
-
- rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off,
- count, buf);
- if (rc < 0)
- return -EIO;
-
- return count;
-}
-
-static ssize_t ds1682_eeprom_write(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct i2c_client *client = kobj_to_i2c_client(kobj);
-
- dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n",
- buf, off, count);
-
- if (off >= DS1682_EEPROM_SIZE)
- return -ENOSPC;
-
- if (off + count > DS1682_EEPROM_SIZE)
- count = DS1682_EEPROM_SIZE - off;
-
- /* Write out to the device */
- if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
- count, buf) < 0)
- return -EIO;
-
- return count;
-}
-
-static struct bin_attribute ds1682_eeprom_attr = {
- .attr = {
- .name = "eeprom",
- .mode = S_IRUGO | S_IWUSR,
- },
- .size = DS1682_EEPROM_SIZE,
- .read = ds1682_eeprom_read,
- .write = ds1682_eeprom_write,
-};
-
-/*
- * Called when a ds1682 device is matched with this driver
- */
-static int ds1682_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- int rc;
-
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_I2C_BLOCK)) {
- dev_err(&client->dev, "i2c bus does not support the ds1682\n");
- rc = -ENODEV;
- goto exit;
- }
-
- rc = sysfs_create_group(&client->dev.kobj, &ds1682_group);
- if (rc)
- goto exit;
-
- rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
- if (rc)
- goto exit_bin_attr;
-
- return 0;
-
- exit_bin_attr:
- sysfs_remove_group(&client->dev.kobj, &ds1682_group);
- exit:
- return rc;
-}
-
-static int ds1682_remove(struct i2c_client *client)
-{
- sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
- sysfs_remove_group(&client->dev.kobj, &ds1682_group);
- return 0;
-}
-
-static const struct i2c_device_id ds1682_id[] = {
- { "ds1682", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ds1682_id);
-
-static struct i2c_driver ds1682_driver = {
- .driver = {
- .name = "ds1682",
- },
- .probe = ds1682_probe,
- .remove = ds1682_remove,
- .id_table = ds1682_id,
-};
-
-static int __init ds1682_init(void)
-{
- return i2c_add_driver(&ds1682_driver);
-}
-
-static void __exit ds1682_exit(void)
-{
- i2c_del_driver(&ds1682_driver);
-}
-
-MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
-MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
-MODULE_LICENSE("GPL");
-
-module_init(ds1682_init);
-module_exit(ds1682_exit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 18:32:15 +0000