diff options
Diffstat (limited to 'drivers/ide/ide-lib.c')
| -rw-r--r-- | drivers/ide/ide-lib.c | 137 |
1 files changed, 104 insertions, 33 deletions
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 92a6c7bcf52..0e2562f0f74 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -76,41 +76,26 @@ EXPORT_SYMBOL(ide_xfer_verbose); * Given the available transfer modes this function returns * the best available speed at or below the speed requested. * - * FIXME: filter also PIO/SWDMA/MWDMA modes + * TODO: check device PIO capabilities */ -u8 ide_rate_filter(ide_drive_t *drive, u8 speed) +static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) { -#ifdef CONFIG_BLK_DEV_IDEDMA ide_hwif_t *hwif = drive->hwif; - u8 mask = hwif->ultra_mask, mode = XFER_MW_DMA_2; + u8 mode = ide_find_dma_mode(drive, speed); - if (hwif->udma_filter) - mask = hwif->udma_filter(drive); - - /* - * TODO: speed > XFER_UDMA_2 extra check is needed to avoid false - * cable warning from eighty_ninty_three(), moving ide_rate_filter() - * calls from ->speedproc to core code will make this hack go away - */ - if (speed > XFER_UDMA_2) { - if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) - mask &= 0x07; + if (mode == 0) { + if (hwif->pio_mask) + mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; + else + mode = XFER_PIO_4; } - if (mask) - mode = fls(mask) - 1 + XFER_UDMA_0; - // printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); return min(speed, mode); -#else /* !CONFIG_BLK_DEV_IDEDMA */ - return min(speed, (u8)XFER_PIO_4); -#endif /* CONFIG_BLK_DEV_IDEDMA */ } -EXPORT_SYMBOL(ide_rate_filter); - int ide_use_fast_pio(ide_drive_t *drive) { struct hd_driveid *id = drive->id; @@ -340,6 +325,35 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode) EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); +/* req_pio == "255" for auto-tune */ +void ide_set_pio(ide_drive_t *drive, u8 req_pio) +{ + ide_hwif_t *hwif = drive->hwif; + u8 host_pio, pio; + + if (hwif->set_pio_mode == NULL) + return; + + BUG_ON(hwif->pio_mask == 0x00); + + host_pio = fls(hwif->pio_mask) - 1; + + pio = ide_get_best_pio_mode(drive, req_pio, host_pio); + + /* + * TODO: + * - report device max PIO mode + * - check req_pio != 255 against device max PIO mode + */ + printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", + drive->name, host_pio, req_pio, + req_pio == 255 ? "(auto-tune)" : "", pio); + + (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); +} + +EXPORT_SYMBOL_GPL(ide_set_pio); + /** * ide_toggle_bounce - handle bounce buffering * @drive: drive to update @@ -364,26 +378,83 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } +int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + + if (hwif->set_pio_mode == NULL) + return -1; + + /* + * TODO: temporary hack for some legacy host drivers that didn't + * set transfer mode on the device in ->set_pio_mode method... + */ + if (hwif->set_dma_mode == NULL) { + hwif->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + hwif->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } else { + hwif->set_pio_mode(drive, mode - XFER_PIO_0); + return ide_config_drive_speed(drive, mode); + } +} + +int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + + if (hwif->set_dma_mode == NULL) + return -1; + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + hwif->set_dma_mode(drive, mode); + return 0; + } else { + hwif->set_dma_mode(drive, mode); + return ide_config_drive_speed(drive, mode); + } +} + +EXPORT_SYMBOL_GPL(ide_set_dma_mode); + /** * ide_set_xfer_rate - set transfer rate * @drive: drive to set - * @speed: speed to attempt to set + * @rate: speed to attempt to set * * General helper for setting the speed of an IDE device. This * function knows about user enforced limits from the configuration - * which speedproc() does not. High level drivers should never - * invoke speedproc() directly. + * which ->set_pio_mode/->set_dma_mode does not. */ - + int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { -#ifndef CONFIG_BLK_DEV_IDEDMA - rate = min(rate, (u8) XFER_PIO_4); -#endif - if(HWIF(drive)->speedproc) - return HWIF(drive)->speedproc(drive, rate); - else + ide_hwif_t *hwif = drive->hwif; + + if (hwif->set_dma_mode == NULL) return -1; + + rate = ide_rate_filter(drive, rate); + + if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) + return ide_set_pio_mode(drive, rate); + + /* + * TODO: transfer modes 0x00-0x07 passed from the user-space are + * currently handled here which needs fixing (please note that such + * case could happen iff the transfer mode has already been set on + * the device by ide-proc.c::set_xfer_rate()). + */ + + return ide_set_dma_mode(drive, rate); } static void ide_dump_opcode(ide_drive_t *drive) |