aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/ide-proc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/ide-proc.c')
-rw-r--r--drivers/ide/ide-proc.c310
1 files changed, 308 insertions, 2 deletions
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index a9e0b30fb1f..949a6f609d8 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -3,6 +3,8 @@
*
* Copyright (C) 1997-1998 Mark Lord
* Copyright (C) 2003 Red Hat <alan@redhat.com>
+ *
+ * Some code was moved here from ide.c, see it for original copyrights.
*/
/*
@@ -121,6 +123,265 @@ static int proc_ide_read_identify
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
}
+/**
+ * __ide_add_setting - add an ide setting option
+ * @drive: drive to use
+ * @name: setting name
+ * @rw: true if the function is read write
+ * @data_type: type of data
+ * @min: range minimum
+ * @max: range maximum
+ * @mul_factor: multiplication scale
+ * @div_factor: divison scale
+ * @data: private data field
+ * @set: setting
+ * @auto_remove: setting auto removal flag
+ *
+ * Removes the setting named from the device if it is present.
+ * The function takes the settings_lock to protect against
+ * parallel changes. This function must not be called from IRQ
+ * context. Returns 0 on success or -1 on failure.
+ *
+ * BUGS: This code is seriously over-engineered. There is also
+ * magic about how the driver specific features are setup. If
+ * a driver is attached we assume the driver settings are auto
+ * remove.
+ */
+
+static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
+{
+ ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
+
+ down(&ide_setting_sem);
+ while ((*p) && strcmp((*p)->name, name) < 0)
+ p = &((*p)->next);
+ if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
+ goto abort;
+ if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
+ goto abort;
+ strcpy(setting->name, name);
+ setting->rw = rw;
+ setting->data_type = data_type;
+ setting->min = min;
+ setting->max = max;
+ setting->mul_factor = mul_factor;
+ setting->div_factor = div_factor;
+ setting->data = data;
+ setting->set = set;
+
+ setting->next = *p;
+ if (auto_remove)
+ setting->auto_remove = 1;
+ *p = setting;
+ up(&ide_setting_sem);
+ return 0;
+abort:
+ up(&ide_setting_sem);
+ kfree(setting);
+ return -1;
+}
+
+int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
+{
+ return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1);
+}
+
+EXPORT_SYMBOL(ide_add_setting);
+
+/**
+ * __ide_remove_setting - remove an ide setting option
+ * @drive: drive to use
+ * @name: setting name
+ *
+ * Removes the setting named from the device if it is present.
+ * The caller must hold the setting semaphore.
+ */
+
+static void __ide_remove_setting (ide_drive_t *drive, char *name)
+{
+ ide_settings_t **p, *setting;
+
+ p = (ide_settings_t **) &drive->settings;
+
+ while ((*p) && strcmp((*p)->name, name))
+ p = &((*p)->next);
+ if ((setting = (*p)) == NULL)
+ return;
+
+ (*p) = setting->next;
+
+ kfree(setting->name);
+ kfree(setting);
+}
+
+/**
+ * auto_remove_settings - remove driver specific settings
+ * @drive: drive
+ *
+ * Automatically remove all the driver specific settings for this
+ * drive. This function may not be called from IRQ context. The
+ * caller must hold ide_setting_sem.
+ */
+
+static void auto_remove_settings (ide_drive_t *drive)
+{
+ ide_settings_t *setting;
+repeat:
+ setting = drive->settings;
+ while (setting) {
+ if (setting->auto_remove) {
+ __ide_remove_setting(drive, setting->name);
+ goto repeat;
+ }
+ setting = setting->next;
+ }
+}
+
+/**
+ * ide_find_setting_by_name - find a drive specific setting
+ * @drive: drive to scan
+ * @name: setting name
+ *
+ * Scan's the device setting table for a matching entry and returns
+ * this or NULL if no entry is found. The caller must hold the
+ * setting semaphore
+ */
+
+static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name)
+{
+ ide_settings_t *setting = drive->settings;
+
+ while (setting) {
+ if (strcmp(setting->name, name) == 0)
+ break;
+ setting = setting->next;
+ }
+ return setting;
+}
+
+/**
+ * ide_read_setting - read an IDE setting
+ * @drive: drive to read from
+ * @setting: drive setting
+ *
+ * Read a drive setting and return the value. The caller
+ * must hold the ide_setting_sem when making this call.
+ *
+ * BUGS: the data return and error are the same return value
+ * so an error -EINVAL and true return of the same value cannot
+ * be told apart
+ */
+
+static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting)
+{
+ int val = -EINVAL;
+ unsigned long flags;
+
+ if ((setting->rw & SETTING_READ)) {
+ spin_lock_irqsave(&ide_lock, flags);
+ switch(setting->data_type) {
+ case TYPE_BYTE:
+ val = *((u8 *) setting->data);
+ break;
+ case TYPE_SHORT:
+ val = *((u16 *) setting->data);
+ break;
+ case TYPE_INT:
+ val = *((u32 *) setting->data);
+ break;
+ }
+ spin_unlock_irqrestore(&ide_lock, flags);
+ }
+ return val;
+}
+
+/**
+ * ide_write_setting - read an IDE setting
+ * @drive: drive to read from
+ * @setting: drive setting
+ * @val: value
+ *
+ * Write a drive setting if it is possible. The caller
+ * must hold the ide_setting_sem when making this call.
+ *
+ * BUGS: the data return and error are the same return value
+ * so an error -EINVAL and true return of the same value cannot
+ * be told apart
+ *
+ * FIXME: This should be changed to enqueue a special request
+ * to the driver to change settings, and then wait on a sema for completion.
+ * The current scheme of polling is kludgy, though safe enough.
+ */
+
+static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (setting->set)
+ return setting->set(drive, val);
+ if (!(setting->rw & SETTING_WRITE))
+ return -EPERM;
+ if (val < setting->min || val > setting->max)
+ return -EINVAL;
+ if (ide_spin_wait_hwgroup(drive))
+ return -EBUSY;
+ switch (setting->data_type) {
+ case TYPE_BYTE:
+ *((u8 *) setting->data) = val;
+ break;
+ case TYPE_SHORT:
+ *((u16 *) setting->data) = val;
+ break;
+ case TYPE_INT:
+ *((u32 *) setting->data) = val;
+ break;
+ }
+ spin_unlock_irq(&ide_lock);
+ return 0;
+}
+
+static int set_xfer_rate (ide_drive_t *drive, int arg)
+{
+ int err;
+
+ if (arg < 0 || arg > 70)
+ return -EINVAL;
+
+ err = ide_wait_cmd(drive,
+ WIN_SETFEATURES, (u8) arg,
+ SETFEATURES_XFER, 0, NULL);
+
+ if (!err && arg) {
+ ide_set_xfer_rate(drive, (u8) arg);
+ ide_driveid_update(drive);
+ }
+ return err;
+}
+
+/**
+ * ide_add_generic_settings - generic ide settings
+ * @drive: drive being configured
+ *
+ * Add the generic parts of the system settings to the /proc files.
+ * The caller must not be holding the ide_setting_sem.
+ */
+
+void ide_add_generic_settings (ide_drive_t *drive)
+{
+/*
+ * drive setting name read/write access data type min max mul_factor div_factor data pointer set function
+ */
+ __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
+ __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0);
+ __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0);
+ __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0);
+ __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0);
+ __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0);
+ __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
+ __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
+ __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0);
+}
+
static void proc_ide_settings_warn(void)
{
static int warned = 0;
@@ -399,7 +660,7 @@ static ide_proc_entry_t generic_drive_entries[] = {
{ NULL, 0, NULL, NULL }
};
-void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data)
+static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data)
{
struct proc_dir_entry *ent;
@@ -415,7 +676,7 @@ void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void
}
}
-void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p)
+static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p)
{
if (!dir || !p)
return;
@@ -425,6 +686,51 @@ void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p)
}
}
+void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver)
+{
+ ide_add_proc_entries(drive->proc, driver->proc, drive);
+}
+
+EXPORT_SYMBOL(ide_proc_register_driver);
+
+/**
+ * ide_proc_unregister_driver - remove driver specific data
+ * @drive: drive
+ * @driver: driver
+ *
+ * Clean up the driver specific /proc files and IDE settings
+ * for a given drive.
+ *
+ * Takes ide_setting_sem and ide_lock.
+ * Caller must hold none of the locks.
+ */
+
+void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
+{
+ unsigned long flags;
+
+ ide_remove_proc_entries(drive->proc, driver->proc);
+
+ down(&ide_setting_sem);
+ spin_lock_irqsave(&ide_lock, flags);
+ /*
+ * ide_setting_sem protects the settings list
+ * ide_lock protects the use of settings
+ *
+ * so we need to hold both, ide_settings_sem because we want to
+ * modify the settings list, and ide_lock because we cannot take
+ * a setting out that is being used.
+ *
+ * OTOH both ide_{read,write}_setting are only ever used under
+ * ide_setting_sem.
+ */
+ auto_remove_settings(drive);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ up(&ide_setting_sem);
+}
+
+EXPORT_SYMBOL(ide_proc_unregister_driver);
+
static void create_proc_ide_drives(ide_hwif_t *hwif)
{
int d;