aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/ide.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/ide.c')
-rw-r--r--drivers/ide/ide.c119
1 files changed, 23 insertions, 96 deletions
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 0cd76bf6683..5e88a060df0 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -16,10 +16,6 @@
* (usually 14 & 15).
* There can be up to two drives per interface, as per the ATA-2 spec.
*
- * Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64
- * Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
- * Tertiary: ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
- * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
* ...
*
* From hd.c:
@@ -47,80 +43,6 @@
* This was a rewrite of just about everything from hd.c, though some original
* code is still sprinkled about. Think of it as a major evolution, with
* inspiration from lots of linux users, esp. hamish@zot.apana.org.au
- *
- * Version 1.0 ALPHA initial code, primary i/f working okay
- * Version 1.3 BETA dual i/f on shared irq tested & working!
- * Version 1.4 BETA added auto probing for irq(s)
- * Version 1.5 BETA added ALPHA (untested) support for IDE cd-roms,
- * ...
- * Version 5.50 allow values as small as 20 for idebus=
- * Version 5.51 force non io_32bit in drive_cmd_intr()
- * change delay_10ms() to delay_50ms() to fix problems
- * Version 5.52 fix incorrect invalidation of removable devices
- * add "hdx=slow" command line option
- * Version 5.60 start to modularize the driver; the disk and ATAPI
- * drivers can be compiled as loadable modules.
- * move IDE probe code to ide-probe.c
- * move IDE disk code to ide-disk.c
- * add support for generic IDE device subdrivers
- * add m68k code from Geert Uytterhoeven
- * probe all interfaces by default
- * add ioctl to (re)probe an interface
- * Version 6.00 use per device request queues
- * attempt to optimize shared hwgroup performance
- * add ioctl to manually adjust bandwidth algorithms
- * add kerneld support for the probe module
- * fix bug in ide_error()
- * fix bug in the first ide_get_lock() call for Atari
- * don't flush leftover data for ATAPI devices
- * Version 6.01 clear hwgroup->active while the hwgroup sleeps
- * support HDIO_GETGEO for floppies
- * Version 6.02 fix ide_ack_intr() call
- * check partition table on floppies
- * Version 6.03 handle bad status bit sequencing in ide_wait_stat()
- * Version 6.10 deleted old entries from this list of updates
- * replaced triton.c with ide-dma.c generic PCI DMA
- * added support for BIOS-enabled UltraDMA
- * rename all "promise" things to "pdc4030"
- * fix EZ-DRIVE handling on small disks
- * Version 6.11 fix probe error in ide_scan_devices()
- * fix ancient "jiffies" polling bugs
- * mask all hwgroup interrupts on each irq entry
- * Version 6.12 integrate ioctl and proc interfaces
- * fix parsing of "idex=" command line parameter
- * Version 6.13 add support for ide4/ide5 courtesy rjones@orchestream.com
- * Version 6.14 fixed IRQ sharing among PCI devices
- * Version 6.15 added SMP awareness to IDE drivers
- * Version 6.16 fixed various bugs; even more SMP friendly
- * Version 6.17 fix for newest EZ-Drive problem
- * Version 6.18 default unpartitioned-disk translation now "BIOS LBA"
- * Version 6.19 Re-design for a UNIFORM driver for all platforms,
- * model based on suggestions from Russell King and
- * Geert Uytterhoeven
- * Promise DC4030VL now supported.
- * add support for ide6/ide7
- * delay_50ms() changed to ide_delay_50ms() and exported.
- * Version 6.20 Added/Fixed Generic ATA-66 support and hwif detection.
- * Added hdx=flash to allow for second flash disk
- * detection w/o the hang loop.
- * Added support for ide8/ide9
- * Added idex=ata66 for the quirky chipsets that are
- * ATA-66 compliant, but have yet to determine a method
- * of verification of the 80c cable presence.
- * Specifically Promise's PDC20262 chipset.
- * Version 6.21 Fixing/Fixed SMP spinlock issue with insight from an old
- * hat that clarified original low level driver design.
- * Version 6.30 Added SMP support; fixed multmode issues. -ml
- * Version 6.31 Debug Share INTR's and request queue streaming
- * Native ATA-100 support
- * Prep for Cascades Project
- * Version 7.00alpha First named revision of ide rearrange
- *
- * Some additional driver compile-time options are in ./include/linux/ide.h
- *
- * To do, in likely order of completion:
- * - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
- *
*/
#define REVISION "Revision: 7.00alpha2"
@@ -169,7 +91,7 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
static int idebus_parameter; /* holds the "idebus=" parameter */
static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */
-DECLARE_MUTEX(ide_cfg_sem);
+DEFINE_MUTEX(ide_cfg_mtx);
__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
@@ -455,11 +377,17 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->straight8 = tmp_hwif->straight8;
hwif->bus_state = tmp_hwif->bus_state;
+ hwif->host_flags = tmp_hwif->host_flags;
+
+ hwif->pio_mask = tmp_hwif->pio_mask;
+
hwif->atapi_dma = tmp_hwif->atapi_dma;
hwif->ultra_mask = tmp_hwif->ultra_mask;
hwif->mwdma_mask = tmp_hwif->mwdma_mask;
hwif->swdma_mask = tmp_hwif->swdma_mask;
+ hwif->cbl = tmp_hwif->cbl;
+
hwif->chipset = tmp_hwif->chipset;
hwif->hold = tmp_hwif->hold;
@@ -496,8 +424,8 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq;
hwif->dma_host_on = tmp_hwif->dma_host_on;
hwif->dma_host_off = tmp_hwif->dma_host_off;
- hwif->ide_dma_lostirq = tmp_hwif->ide_dma_lostirq;
- hwif->ide_dma_timeout = tmp_hwif->ide_dma_timeout;
+ hwif->dma_lost_irq = tmp_hwif->dma_lost_irq;
+ hwif->dma_timeout = tmp_hwif->dma_timeout;
hwif->OUTB = tmp_hwif->OUTB;
hwif->OUTBSYNC = tmp_hwif->OUTBSYNC;
@@ -533,7 +461,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->extra_base = tmp_hwif->extra_base;
hwif->extra_ports = tmp_hwif->extra_ports;
hwif->autodma = tmp_hwif->autodma;
- hwif->udma_four = tmp_hwif->udma_four;
hwif->hwif_data = tmp_hwif->hwif_data;
}
@@ -564,7 +491,7 @@ void ide_unregister(unsigned int index)
{
ide_drive_t *drive;
ide_hwif_t *hwif, *g;
- static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */
+ static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */
ide_hwgroup_t *hwgroup;
int irq_count = 0, unit;
@@ -572,7 +499,7 @@ void ide_unregister(unsigned int index)
BUG_ON(in_interrupt());
BUG_ON(irqs_disabled());
- down(&ide_cfg_sem);
+ mutex_lock(&ide_cfg_mtx);
spin_lock_irq(&ide_lock);
hwif = &ide_hwifs[index];
if (!hwif->present)
@@ -679,7 +606,7 @@ void ide_unregister(unsigned int index)
abort:
spin_unlock_irq(&ide_lock);
- up(&ide_cfg_sem);
+ mutex_unlock(&ide_cfg_mtx);
}
EXPORT_SYMBOL(ide_unregister);
@@ -817,9 +744,9 @@ EXPORT_SYMBOL(ide_register_hw);
* Locks for IDE setting functionality
*/
-DECLARE_MUTEX(ide_setting_sem);
+DEFINE_MUTEX(ide_setting_mtx);
-EXPORT_SYMBOL_GPL(ide_setting_sem);
+EXPORT_SYMBOL_GPL(ide_setting_mtx);
/**
* ide_spin_wait_hwgroup - wait for group
@@ -1170,10 +1097,6 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
return 0;
}
- case CDROMEJECT:
- case CDROMCLOSETRAY:
- return scsi_cmd_ioctl(file, bdev->bd_disk, cmd, p);
-
case HDIO_GET_BUSSTATE:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
@@ -1192,11 +1115,11 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
}
read_val:
- down(&ide_setting_sem);
+ mutex_lock(&ide_setting_mtx);
spin_lock_irqsave(&ide_lock, flags);
err = *val;
spin_unlock_irqrestore(&ide_lock, flags);
- up(&ide_setting_sem);
+ mutex_unlock(&ide_setting_mtx);
return err >= 0 ? put_user(err, (long __user *)arg) : err;
set_val:
@@ -1206,9 +1129,9 @@ set_val:
if (!capable(CAP_SYS_ADMIN))
err = -EACCES;
else {
- down(&ide_setting_sem);
+ mutex_lock(&ide_setting_mtx);
err = setfunc(drive, arg);
- up(&ide_setting_sem);
+ mutex_unlock(&ide_setting_mtx);
}
}
return err;
@@ -1548,7 +1471,11 @@ static int __init ide_setup(char *s)
goto bad_option;
case -7: /* ata66 */
#ifdef CONFIG_BLK_DEV_IDEPCI
- hwif->udma_four = 1;
+ /*
+ * Use ATA_CBL_PATA40_SHORT so drive side
+ * cable detection is also overriden.
+ */
+ hwif->cbl = ATA_CBL_PATA40_SHORT;
goto obsolete_option;
#else
goto bad_hwif;