1 files changed, 140 insertions, 154 deletions

diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index a1cfe033a55..aaf38109eae 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -4,7 +4,7 @@
 
 /*
  *  Original authors:	abramov@cecmow.enet.dec.com (Igor Abramov)
- *  			mlord@pobox.com (Mark Lord)
+ *			mlord@pobox.com (Mark Lord)
  *
  *  See linux/MAINTAINERS for address of current maintainer.
  *
@@ -98,7 +98,7 @@
 
 #define CMD640_PREFETCH_MASKS 1
 
-//#define CMD640_DUMP_REGS
+/*#define CMD640_DUMP_REGS */
 
 #include <linux/types.h>
 #include <linux/kernel.h>
@@ -109,10 +109,9 @@
 
 #include <asm/io.h>
 
-/*
- * This flag is set in ide.c by the parameter:  ide0=cmd640_vlb
- */
-int cmd640_vlb = 0;
+#define DRV_NAME "cmd640"
+
+static int cmd640_vlb;
 
 /*
  * CMD640 specific registers definition.
@@ -185,7 +184,6 @@ static DEFINE_SPINLOCK(cmd640_lock);
  * These are initialized to point at the devices we control
  */
 static ide_hwif_t  *cmd_hwif0, *cmd_hwif1;
-static ide_drive_t *cmd_drives[4];
 
 /*
  * Interface to access cmd640x registers
@@ -207,13 +205,13 @@ static unsigned int cmd640_chip_version;
 
 /* PCI method 1 access */
 
-static void put_cmd640_reg_pci1 (u16 reg, u8 val)
+static void put_cmd640_reg_pci1(u16 reg, u8 val)
 {
 	outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
 	outb_p(val, (reg & 3) | 0xcfc);
 }
 
-static u8 get_cmd640_reg_pci1 (u16 reg)
+static u8 get_cmd640_reg_pci1(u16 reg)
 {
 	outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
 	return inb_p((reg & 3) | 0xcfc);
@@ -221,14 +219,14 @@ static u8 get_cmd640_reg_pci1 (u16 reg)
 
 /* PCI method 2 access (from CMD datasheet) */
 
-static void put_cmd640_reg_pci2 (u16 reg, u8 val)
+static void put_cmd640_reg_pci2(u16 reg, u8 val)
 {
 	outb_p(0x10, 0xcf8);
 	outb_p(val, cmd640_key + reg);
 	outb_p(0, 0xcf8);
 }
 
-static u8 get_cmd640_reg_pci2 (u16 reg)
+static u8 get_cmd640_reg_pci2(u16 reg)
 {
 	u8 b;
 
@@ -240,13 +238,13 @@ static u8 get_cmd640_reg_pci2 (u16 reg)
 
 /* VLB access */
 
-static void put_cmd640_reg_vlb (u16 reg, u8 val)
+static void put_cmd640_reg_vlb(u16 reg, u8 val)
 {
 	outb_p(reg, cmd640_key);
 	outb_p(val, cmd640_key + 4);
 }
 
-static u8 get_cmd640_reg_vlb (u16 reg)
+static u8 get_cmd640_reg_vlb(u16 reg)
 {
 	outb_p(reg, cmd640_key);
 	return inb_p(cmd640_key + 4);
@@ -268,11 +266,11 @@ static void put_cmd640_reg(u16 reg, u8 val)
 	unsigned long flags;
 
 	spin_lock_irqsave(&cmd640_lock, flags);
-	__put_cmd640_reg(reg,val);
+	__put_cmd640_reg(reg, val);
 	spin_unlock_irqrestore(&cmd640_lock, flags);
 }
 
-static int __init match_pci_cmd640_device (void)
+static int __init match_pci_cmd640_device(void)
 {
 	const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
 	unsigned int i;
@@ -292,7 +290,7 @@ static int __init match_pci_cmd640_device (void)
 /*
  * Probe for CMD640x -- pci method 1
  */
-static int __init probe_for_cmd640_pci1 (void)
+static int __init probe_for_cmd640_pci1(void)
 {
 	__get_cmd640_reg = get_cmd640_reg_pci1;
 	__put_cmd640_reg = put_cmd640_reg_pci1;
@@ -308,7 +306,7 @@ static int __init probe_for_cmd640_pci1 (void)
 /*
  * Probe for CMD640x -- pci method 2
  */
-static int __init probe_for_cmd640_pci2 (void)
+static int __init probe_for_cmd640_pci2(void)
 {
 	__get_cmd640_reg = get_cmd640_reg_pci2;
 	__put_cmd640_reg = put_cmd640_reg_pci2;
@@ -322,7 +320,7 @@ static int __init probe_for_cmd640_pci2 (void)
 /*
  * Probe for CMD640x -- vlb
  */
-static int __init probe_for_cmd640_vlb (void)
+static int __init probe_for_cmd640_vlb(void)
 {
 	u8 b;
 
@@ -343,18 +341,18 @@ static int __init probe_for_cmd640_vlb (void)
  *  Returns 1 if an IDE interface/drive exists at 0x170,
  *  Returns 0 otherwise.
  */
-static int __init secondary_port_responding (void)
+static int __init secondary_port_responding(void)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&cmd640_lock, flags);
 
-	outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET);	/* select drive0 */
+	outb_p(0x0a, 0x176);	/* select drive0 */
 	udelay(100);
-	if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) {
-		outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */
+	if ((inb_p(0x176) & 0x1f) != 0x0a) {
+		outb_p(0x1a, 0x176); /* select drive1 */
 		udelay(100);
-		if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) {
+		if ((inb_p(0x176) & 0x1f) != 0x1a) {
 			spin_unlock_irqrestore(&cmd640_lock, flags);
 			return 0; /* nothing responded */
 		}
@@ -367,7 +365,7 @@ static int __init secondary_port_responding (void)
 /*
  * Dump out all cmd640 registers.  May be called from ide.c
  */
-static void cmd640_dump_regs (void)
+static void cmd640_dump_regs(void)
 {
 	unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
 
@@ -382,13 +380,13 @@ static void cmd640_dump_regs (void)
 }
 #endif
 
+#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED
 /*
  * Check whether prefetch is on for a drive,
  * and initialize the unmask flags for safe operation.
  */
-static void __init check_prefetch (unsigned int index)
+static void __init check_prefetch(ide_drive_t *drive, unsigned int index)
 {
-	ide_drive_t *drive = cmd_drives[index];
 	u8 b = get_cmd640_reg(prefetch_regs[index]);
 
 	if (b & prefetch_masks[index]) {	/* is prefetch off? */
@@ -403,29 +401,12 @@ static void __init check_prefetch (unsigned int index)
 		drive->no_io_32bit = 0;
 	}
 }
-
-/*
- * Figure out which devices we control
- */
-static void __init setup_device_ptrs (void)
-{
-	cmd_hwif0 = &ide_hwifs[0];
-	cmd_hwif1 = &ide_hwifs[1];
-
-	cmd_drives[0] = &cmd_hwif0->drives[0];
-	cmd_drives[1] = &cmd_hwif0->drives[1];
-	cmd_drives[2] = &cmd_hwif1->drives[0];
-	cmd_drives[3] = &cmd_hwif1->drives[1];
-}
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
+#else
 /*
  * Sets prefetch mode for a drive.
  */
-static void set_prefetch_mode (unsigned int index, int mode)
+static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode)
 {
-	ide_drive_t *drive = cmd_drives[index];
 	unsigned long flags;
 	int reg = prefetch_regs[index];
 	u8 b;
@@ -452,7 +433,7 @@ static void set_prefetch_mode (unsigned int index, int mode)
 /*
  * Dump out current drive clocks settings
  */
-static void display_clocks (unsigned int index)
+static void display_clocks(unsigned int index)
 {
 	u8 active_count, recovery_count;
 
@@ -471,44 +452,16 @@ static void display_clocks (unsigned int index)
  * Pack active and recovery counts into single byte representation
  * used by controller
  */
-static inline u8 pack_nibbles (u8 upper, u8 lower)
+static inline u8 pack_nibbles(u8 upper, u8 lower)
 {
 	return ((upper & 0x0f) << 4) | (lower & 0x0f);
 }
 
 /*
- * This routine retrieves the initial drive timings from the chipset.
- */
-static void __init retrieve_drive_counts (unsigned int index)
-{
-	u8 b;
-
-	/*
-	 * Get the internal setup timing, and convert to clock count
-	 */
-	b = get_cmd640_reg(arttim_regs[index]) & ~0x3f;
-	switch (b) {
-		case 0x00: b = 4; break;
-		case 0x80: b = 3; break;
-		case 0x40: b = 2; break;
-		default:   b = 5; break;
-	}
-	setup_counts[index] = b;
-
-	/*
-	 * Get the active/recovery counts
-	 */
-	b = get_cmd640_reg(drwtim_regs[index]);
-	active_counts[index]   = (b >> 4)   ? (b >> 4)   : 0x10;
-	recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10;
-}
-
-
-/*
  * This routine writes the prepared setup/active/recovery counts
  * for a drive into the cmd640 chipset registers to active them.
  */
-static void program_drive_counts (unsigned int index)
+static void program_drive_counts(ide_drive_t *drive, unsigned int index)
 {
 	unsigned long flags;
 	u8 setup_count    = setup_counts[index];
@@ -522,8 +475,11 @@ static void program_drive_counts (unsigned int index)
 	 * so we merge the timings, using the slowest value for each timing.
 	 */
 	if (index > 1) {
-		unsigned int mate;
-		if (cmd_drives[mate = index ^ 1]->present) {
+		ide_hwif_t *hwif = drive->hwif;
+		ide_drive_t *peer = &hwif->drives[!drive->select.b.unit];
+		unsigned int mate = index ^ 1;
+
+		if (peer->present) {
 			if (setup_count < setup_counts[mate])
 				setup_count = setup_counts[mate];
 			if (active_count < active_counts[mate])
@@ -537,11 +493,11 @@ static void program_drive_counts (unsigned int index)
 	 * Convert setup_count to internal chipset representation
 	 */
 	switch (setup_count) {
-		case 4:	 setup_count = 0x00; break;
-		case 3:	 setup_count = 0x80; break;
-		case 1:
-		case 2:	 setup_count = 0x40; break;
-		default: setup_count = 0xc0; /* case 5 */
+	case 4:	 setup_count = 0x00; break;
+	case 3:	 setup_count = 0x80; break;
+	case 1:
+	case 2:	 setup_count = 0x40; break;
+	default: setup_count = 0xc0; /* case 5 */
 	}
 
 	/*
@@ -562,11 +518,19 @@ static void program_drive_counts (unsigned int index)
 /*
  * Set a specific pio_mode for a drive
  */
-static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time)
+static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
+			    u8 pio_mode, unsigned int cycle_time)
 {
 	int setup_time, active_time, recovery_time, clock_time;
 	u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
-	int bus_speed = system_bus_clock();
+	int bus_speed;
+
+	if (cmd640_vlb && ide_vlb_clk)
+		bus_speed = ide_vlb_clk;
+	else if (!cmd640_vlb && ide_pci_clk)
+		bus_speed = ide_pci_clk;
+	else
+		bus_speed = system_bus_clock();
 
 	if (pio_mode > 5)
 		pio_mode = 5;
@@ -574,15 +538,15 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle
 	active_time = ide_pio_timings[pio_mode].active_time;
 	recovery_time = cycle_time - (setup_time + active_time);
 	clock_time = 1000 / bus_speed;
-	cycle_count = (cycle_time + clock_time - 1) / clock_time;
+	cycle_count = DIV_ROUND_UP(cycle_time, clock_time);
 
-	setup_count = (setup_time + clock_time - 1) / clock_time;
+	setup_count = DIV_ROUND_UP(setup_time, clock_time);
 
-	active_count = (active_time + clock_time - 1) / clock_time;
+	active_count = DIV_ROUND_UP(active_time, clock_time);
 	if (active_count < 2)
 		active_count = 2; /* minimum allowed by cmd640 */
 
-	recovery_count = (recovery_time + clock_time - 1) / clock_time;
+	recovery_count = DIV_ROUND_UP(recovery_time, clock_time);
 	recovery_count2 = cycle_count - (setup_count + active_count);
 	if (recovery_count2 > recovery_count)
 		recovery_count = recovery_count2;
@@ -611,7 +575,7 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle
 	 *	1) this is the wrong place to do it (proper is do_special() in ide.c)
 	 * 	2) in practice this is rarely, if ever, necessary
 	 */
-	program_drive_counts (index);
+	program_drive_counts(drive, index);
 }
 
 static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -619,32 +583,26 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	unsigned int index = 0, cycle_time;
 	u8 b;
 
-	while (drive != cmd_drives[index]) {
-		if (++index > 3) {
-			printk(KERN_ERR "%s: bad news in %s\n",
-					drive->name, __FUNCTION__);
-			return;
-		}
-	}
 	switch (pio) {
-		case 6: /* set fast-devsel off */
-		case 7: /* set fast-devsel on */
-			b = get_cmd640_reg(CNTRL) & ~0x27;
-			if (pio & 1)
-				b |= 0x27;
-			put_cmd640_reg(CNTRL, b);
-			printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis");
-			return;
-
-		case 8: /* set prefetch off */
-		case 9: /* set prefetch on */
-			set_prefetch_mode(index, pio & 1);
-			printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis");
-			return;
+	case 6: /* set fast-devsel off */
+	case 7: /* set fast-devsel on */
+		b = get_cmd640_reg(CNTRL) & ~0x27;
+		if (pio & 1)
+			b |= 0x27;
+		put_cmd640_reg(CNTRL, b);
+		printk("%s: %sabled cmd640 fast host timing (devsel)\n",
+			drive->name, (pio & 1) ? "en" : "dis");
+		return;
+	case 8: /* set prefetch off */
+	case 9: /* set prefetch on */
+		set_prefetch_mode(drive, index, pio & 1);
+		printk("%s: %sabled cmd640 prefetch\n",
+			drive->name, (pio & 1) ? "en" : "dis");
+		return;
 	}
 
 	cycle_time = ide_pio_cycle_time(drive, pio);
-	cmd640_set_mode(index, pio, cycle_time);
+	cmd640_set_mode(drive, index, pio, cycle_time);
 
 	printk("%s: selected cmd640 PIO mode%d (%dns)",
 		drive->name, pio, cycle_time);
@@ -652,6 +610,9 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	display_clocks(index);
 }
 
+static const struct ide_port_ops cmd640_port_ops = {
+	.set_pio_mode		= cmd640_set_pio_mode,
+};
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
 static int pci_conf1(void)
@@ -693,14 +654,32 @@ static const struct ide_port_info cmd640_port_info __initdata = {
 	.chipset		= ide_cmd640,
 	.host_flags		= IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA |
-				  IDE_HFLAG_NO_AUTOTUNE |
 				  IDE_HFLAG_ABUSE_PREFETCH |
 				  IDE_HFLAG_ABUSE_FAST_DEVSEL,
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+	.port_ops		= &cmd640_port_ops,
 	.pio_mask		= ATA_PIO5,
 #endif
 };
 
+static int cmd640x_init_one(unsigned long base, unsigned long ctl)
+{
+	if (!request_region(base, 8, DRV_NAME)) {
+		printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
+				DRV_NAME, base, base + 7);
+		return -EBUSY;
+	}
+
+	if (!request_region(ctl, 1, DRV_NAME)) {
+		printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
+				DRV_NAME, ctl);
+		release_region(base, 8);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
 /*
  * Probe for a cmd640 chipset, and initialize it if found.
  */
@@ -709,7 +688,7 @@ static int __init cmd640x_init(void)
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
 	int second_port_toggled = 0;
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-	int second_port_cmd640 = 0;
+	int second_port_cmd640 = 0, rc;
 	const char *bus_type, *port2;
 	unsigned int index;
 	u8 b, cfr;
@@ -749,10 +728,21 @@ static int __init cmd640x_init(void)
 	cfr = get_cmd640_reg(CFR);
 	cmd640_chip_version = cfr & CFR_DEVREV;
 	if (cmd640_chip_version == 0) {
-		printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
+		printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
 		return 0;
 	}
 
+	rc = cmd640x_init_one(0x1f0, 0x3f6);
+	if (rc)
+		return rc;
+
+	rc = cmd640x_init_one(0x170, 0x376);
+	if (rc) {
+		release_region(0x3f6, 1);
+		release_region(0x1f0, 8);
+		return rc;
+	}
+
 	memset(&hw, 0, sizeof(hw));
 
 	ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
@@ -764,17 +754,15 @@ static int __init cmd640x_init(void)
 	printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
 			 "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
 
+	cmd_hwif0 = ide_find_port();
+
 	/*
 	 * Initialize data for primary port
 	 */
-	setup_device_ptrs ();
-
-	ide_init_port_hw(cmd_hwif0, &hw[0]);
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-	cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-	idx[0] = cmd_hwif0->index;
+	if (cmd_hwif0) {
+		ide_init_port_hw(cmd_hwif0, &hw[0]);
+		idx[0] = cmd_hwif0->index;
+	}
 
 	/*
 	 * Ensure compatibility by always using the slowest timings
@@ -786,10 +774,13 @@ static int __init cmd640x_init(void)
 	put_cmd640_reg(CMDTIM, 0);
 	put_cmd640_reg(BRST, 0x40);
 
+	cmd_hwif1 = ide_find_port();
+
 	/*
 	 * Try to enable the secondary interface, if not already enabled
 	 */
-	if (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
+	if (cmd_hwif1 &&
+	    cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
 		port2 = "not probed";
 	} else {
 		b = get_cmd640_reg(CNTRL);
@@ -820,15 +811,11 @@ static int __init cmd640x_init(void)
 	/*
 	 * Initialize data for secondary cmd640 port, if enabled
 	 */
-	if (second_port_cmd640) {
+	if (second_port_cmd640 && cmd_hwif1) {
 		ide_init_port_hw(cmd_hwif1, &hw[1]);
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-		cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
 		idx[1] = cmd_hwif1->index;
 	}
-	printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
+	printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
 			 second_port_cmd640 ? "" : "not ", port2);
 
 	/*
@@ -836,35 +823,34 @@ static int __init cmd640x_init(void)
 	 * Do not unnecessarily disturb any prior BIOS setup of these.
 	 */
 	for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
-		ide_drive_t *drive = cmd_drives[index];
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-		if (drive->autotune || ((index > 1) && second_port_toggled)) {
-	 		/*
-	 		 * Reset timing to the slowest speed and turn off prefetch.
-			 * This way, the drive identify code has a better chance.
-			 */
-			setup_counts    [index] = 4;	/* max possible */
-			active_counts   [index] = 16;	/* max possible */
-			recovery_counts [index] = 16;	/* max possible */
-			program_drive_counts (index);
-			set_prefetch_mode (index, 0);
-			printk("cmd640: drive%d timings/prefetch cleared\n", index);
-		} else {
-			/*
-			 * Record timings/prefetch without changing them.
-			 * This preserves any prior BIOS setup.
-			 */
-			retrieve_drive_counts (index);
-			check_prefetch (index);
-			printk("cmd640: drive%d timings/prefetch(%s) preserved",
-				index, drive->no_io_32bit ? "off" : "on");
-			display_clocks(index);
+		ide_drive_t *drive;
+
+		if (index > 1) {
+			if (cmd_hwif1 == NULL)
+				continue;
+			drive = &cmd_hwif1->drives[index & 1];
+		} else  {
+			if (cmd_hwif0 == NULL)
+				continue;
+			drive = &cmd_hwif0->drives[index & 1];
 		}
+
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+		/*
+		 * Reset timing to the slowest speed and turn off prefetch.
+		 * This way, the drive identify code has a better chance.
+		 */
+		setup_counts    [index] = 4;	/* max possible */
+		active_counts   [index] = 16;	/* max possible */
+		recovery_counts [index] = 16;	/* max possible */
+		program_drive_counts(drive, index);
+		set_prefetch_mode(drive, index, 0);
+		printk("cmd640: drive%d timings/prefetch cleared\n", index);
 #else
 		/*
 		 * Set the drive unmask flags to match the prefetch setting
 		 */
-		check_prefetch (index);
+		check_prefetch(drive, index);
 		printk("cmd640: drive%d timings/prefetch(%s) preserved\n",
 			index, drive->no_io_32bit ? "off" : "on");
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */