aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/hpt366.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/hpt366.c')
-rw-r--r--drivers/ide/pci/hpt366.c231
1 files changed, 117 insertions, 114 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index ce8a5449a57..2cd74c345a6 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.04 Jun 4, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.10 Jun 29, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
@@ -77,7 +77,7 @@
* since they may tamper with its fields
* - prefix the driver startup messages with the real chip name
* - claim the extra 240 bytes of I/O space for all chips
- * - optimize the rate masking/filtering and the drive list lookup code
+ * - optimize the UltraDMA filtering and the drive list lookup code
* - use pci_get_slot() to get to the function 1 of HPT36x/374
* - cache offset of the channel's misc. control registers (MCRs) being used
* throughout the driver
@@ -99,9 +99,9 @@
* stop duplicating it for each channel by storing the pointer in the pci_dev
* structure: first, at the init_setup stage, point it to a static "template"
* with only the chip type and its specific base DPLL frequency, the highest
- * supported DMA mode, and the chip settings table pointer filled, then, at
- * the init_chipset stage, allocate per-chip instance and fill it with the
- * rest of the necessary information
+ * UltraDMA mode, and the chip settings table pointer filled, then, at the
+ * init_chipset stage, allocate per-chip instance and fill it with the rest
+ * of the necessary information
* - get rid of the constant thresholds in the HPT37x PCI clock detection code,
* switch to calculating PCI clock frequency based on the chip's base DPLL
* frequency
@@ -112,6 +112,7 @@
* also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips;
* unify HPT36x/37x timing setup code and the speedproc handlers by joining
* the register setting lists into the table indexed by the clock selected
+ * - set the correct hwif->ultra_mask for each individual chip
* Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
*/
@@ -182,6 +183,7 @@ static const char *bad_ata66_4[] = {
"IC35L040AVER07-0",
"IC35L060AVER07-0",
"WDC AC310200R",
+ "MAXTOR STM3320620A",
NULL
};
@@ -390,7 +392,7 @@ enum ata_clock {
struct hpt_info {
u8 chip_type; /* Chip type */
- u8 max_mode; /* Speeds allowed */
+ u8 max_ultra; /* Max. UltraDMA mode allowed */
u8 dpll_clk; /* DPLL clock in MHz */
u8 pci_clk; /* PCI clock in MHz */
u32 **settings; /* Chipset settings table */
@@ -429,77 +431,77 @@ static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
static struct hpt_info hpt36x __devinitdata = {
.chip_type = HPT36x,
- .max_mode = (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1,
+ .max_ultra = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? 4 : 3) : 2,
.dpll_clk = 0, /* no DPLL */
.settings = hpt36x_settings
};
static struct hpt_info hpt370 __devinitdata = {
.chip_type = HPT370,
- .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2,
+ .max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4,
.dpll_clk = 48,
.settings = hpt37x_settings
};
static struct hpt_info hpt370a __devinitdata = {
.chip_type = HPT370A,
- .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2,
+ .max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4,
.dpll_clk = 48,
.settings = hpt37x_settings
};
static struct hpt_info hpt374 __devinitdata = {
.chip_type = HPT374,
- .max_mode = 3,
+ .max_ultra = 5,
.dpll_clk = 48,
.settings = hpt37x_settings
};
static struct hpt_info hpt372 __devinitdata = {
.chip_type = HPT372,
- .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
+ .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
.dpll_clk = 55,
.settings = hpt37x_settings
};
static struct hpt_info hpt372a __devinitdata = {
.chip_type = HPT372A,
- .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
+ .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
.dpll_clk = 66,
.settings = hpt37x_settings
};
static struct hpt_info hpt302 __devinitdata = {
.chip_type = HPT302,
- .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3,
+ .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
.dpll_clk = 66,
.settings = hpt37x_settings
};
static struct hpt_info hpt371 __devinitdata = {
.chip_type = HPT371,
- .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3,
+ .max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5,
.dpll_clk = 66,
.settings = hpt37x_settings
};
static struct hpt_info hpt372n __devinitdata = {
.chip_type = HPT372N,
- .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
+ .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
.dpll_clk = 77,
.settings = hpt37x_settings
};
static struct hpt_info hpt302n __devinitdata = {
.chip_type = HPT302N,
- .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3,
+ .max_ultra = HPT302_ALLOW_ATA133_6 ? 6 : 5,
.dpll_clk = 77,
.settings = hpt37x_settings
};
static struct hpt_info hpt371n __devinitdata = {
.chip_type = HPT371N,
- .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3,
+ .max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5,
.dpll_clk = 77,
.settings = hpt37x_settings
};
@@ -522,53 +524,38 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev);
- u8 chip_type = info->chip_type;
- u8 mode = info->max_mode;
u8 mask;
- switch (mode) {
- case 0x04:
- mask = 0x7f;
- break;
- case 0x03:
+ switch (info->chip_type) {
+ case HPT370A:
+ if (!HPT370_ALLOW_ATA100_5 ||
+ check_in_drive_list(drive, bad_ata100_5))
+ return 0x1f;
+ else
+ return 0x3f;
+ case HPT370:
+ if (!HPT370_ALLOW_ATA100_5 ||
+ check_in_drive_list(drive, bad_ata100_5))
+ mask = 0x1f;
+ else
mask = 0x3f;
- if (chip_type >= HPT374)
- break;
- if (!check_in_drive_list(drive, bad_ata100_5))
- goto check_bad_ata33;
- /* fall thru */
- case 0x02:
+ break;
+ case HPT36x:
+ if (!HPT366_ALLOW_ATA66_4 ||
+ check_in_drive_list(drive, bad_ata66_4))
+ mask = 0x0f;
+ else
mask = 0x1f;
- /*
- * CHECK ME, Does this need to be changed to HPT374 ??
- */
- if (chip_type >= HPT370)
- goto check_bad_ata33;
- if (HPT366_ALLOW_ATA66_4 &&
- !check_in_drive_list(drive, bad_ata66_4))
- goto check_bad_ata33;
-
- mask = 0x0f;
- if (HPT366_ALLOW_ATA66_3 &&
- !check_in_drive_list(drive, bad_ata66_3))
- goto check_bad_ata33;
- /* fall thru */
- case 0x01:
+ if (!HPT366_ALLOW_ATA66_3 ||
+ check_in_drive_list(drive, bad_ata66_3))
mask = 0x07;
-
- check_bad_ata33:
- if (chip_type >= HPT370A)
- break;
- if (!check_in_drive_list(drive, bad_ata33))
- break;
- /* fall thru */
- case 0x00:
- default:
- mask = 0x00;
- break;
+ break;
+ default:
+ return 0x7f;
}
- return mask;
+
+ return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
}
static u32 get_speed_setting(u8 speed, struct hpt_info *info)
@@ -665,7 +652,7 @@ static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
@@ -736,7 +723,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive)
* This is specific to the HPT366 UDMA chipset
* by HighPoint|Triones Technologies, Inc.
*/
-static int hpt366_ide_dma_lostirq(ide_drive_t *drive)
+static void hpt366_dma_lost_irq(ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
@@ -748,7 +735,7 @@ static int hpt366_ide_dma_lostirq(ide_drive_t *drive)
drive->name, __FUNCTION__, mcr1, mcr3, scr1);
if (scr1 & 0x10)
pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
- return __ide_dma_lostirq(drive);
+ ide_dma_lost_irq(drive);
}
static void hpt370_clear_engine(ide_drive_t *drive)
@@ -798,10 +785,10 @@ static int hpt370_ide_dma_end(ide_drive_t *drive)
return __ide_dma_end(drive);
}
-static int hpt370_ide_dma_timeout(ide_drive_t *drive)
+static void hpt370_dma_timeout(ide_drive_t *drive)
{
hpt370_irq_timeout(drive);
- return __ide_dma_timeout(drive);
+ ide_dma_timeout(drive);
}
/* returns 1 if DMA IRQ issued, 0 otherwise */
@@ -1007,14 +994,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
*/
*info = *(struct hpt_info *)pci_get_drvdata(dev);
- /*
- * FIXME: Not portable. Also, why do we enable the ROM in the first place?
- * We don't seem to be using it.
- */
- if (dev->resource[PCI_ROM_RESOURCE].start)
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
- dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
@@ -1149,7 +1128,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
* Select 66 MHz DPLL clock only if UltraATA/133 mode is
* supported/enabled, use 50 MHz DPLL clock otherwise...
*/
- if (info->max_mode == 0x04) {
+ if (info->max_ultra == 6) {
dpll_clk = 66;
clock = ATA_CLOCK_66MHZ;
} else if (dpll_clk) { /* HPT36x chips don't have DPLL */
@@ -1242,7 +1221,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
- u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02;
+ u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
@@ -1255,7 +1234,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;
hwif->busproc = &hpt3xx_busproc;
- hwif->udma_filter = &hpt3xx_udma_filter;
+
+ if (chip_type <= HPT370A)
+ hwif->udma_filter = &hpt3xx_udma_filter;
/*
* HPT3xxN chips have some complications:
@@ -1304,7 +1285,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
return;
}
- hwif->ultra_mask = 0x7f;
+ hwif->ultra_mask = hwif->cds->udma_mask;
hwif->mwdma_mask = 0x07;
/*
@@ -1341,8 +1322,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
} else
pci_read_config_byte (dev, 0x5a, &scr1);
- if (!hwif->udma_four)
- hwif->udma_four = (scr1 & ata66) ? 0 : 1;
+ if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+ hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
hwif->ide_dma_check = &hpt366_config_drive_xfer_rate;
@@ -1352,9 +1333,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
} else if (chip_type >= HPT370) {
hwif->dma_start = &hpt370_ide_dma_start;
hwif->ide_dma_end = &hpt370_ide_dma_end;
- hwif->ide_dma_timeout = &hpt370_ide_dma_timeout;
+ hwif->dma_timeout = &hpt370_dma_timeout;
} else
- hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;
+ hwif->dma_lost_irq = &hpt366_dma_lost_irq;
if (!noautodma)
hwif->autodma = 1;
@@ -1424,11 +1405,9 @@ static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d
static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0, mcr1 = 0;
+ u8 mcr1 = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT371N";
info = &hpt371n;
@@ -1453,11 +1432,8 @@ static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0;
-
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT372N";
info = &hpt372n;
@@ -1471,11 +1447,8 @@ static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d
static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT302N";
info = &hpt302n;
@@ -1489,7 +1462,7 @@ static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *dev2;
- u8 rev = 0;
+ u8 rev = dev->revision;
static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
"HPT370", "HPT370A", "HPT372",
"HPT372N" };
@@ -1500,11 +1473,35 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+ switch (rev) {
+ case 0:
+ case 1:
+ case 2:
+ /*
+ * HPT36x chips have one channel per function and have
+ * both channel enable bits located differently and visible
+ * to both functions -- really stupid design decision... :-(
+ * Bit 4 is for the primary channel, bit 5 for the secondary.
+ */
+ d->host_flags |= IDE_HFLAG_SINGLE;
+ d->enablebits[0].mask = d->enablebits[0].val = 0x10;
- if (rev > 6)
+ d->udma_mask = HPT366_ALLOW_ATA66_3 ?
+ (HPT366_ALLOW_ATA66_4 ? 0x1f : 0x0f) : 0x07;
+ break;
+ case 3:
+ case 4:
+ d->udma_mask = HPT370_ALLOW_ATA100_5 ? 0x3f : 0x1f;
+ break;
+ default:
rev = 6;
-
+ /* fall thru */
+ case 5:
+ case 6:
+ d->udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f;
+ break;
+ }
+
d->name = chipset_names[rev];
pci_set_drvdata(dev, info[rev]);
@@ -1512,19 +1509,20 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
if (rev > 2)
goto init_single;
- /*
- * HPT36x chips are single channel and
- * do not seem to have the channel enable bit...
- */
- d->channels = 1;
- d->enablebits[0].reg = 0;
-
if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
- u8 pin1 = 0, pin2 = 0;
+ u8 mcr1 = 0, pin1 = 0, pin2 = 0;
int ret;
pci_set_drvdata(dev2, info[rev]);
+ /*
+ * Now we'll have to force both channels enabled if
+ * at least one of them has been enabled by BIOS...
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ if (mcr1 & 0x30)
+ pci_write_config_byte(dev, 0x50, mcr1 | 0x30);
+
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
if (pin1 != pin2 && dev->irq == dev2->irq) {
@@ -1548,66 +1546,71 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 1 */
.name = "HPT372A",
.init_setup = init_setup_hpt372a,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+ .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 2 */
.name = "HPT302",
.init_setup = init_setup_hpt302,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+ .udma_mask = HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 3 */
.name = "HPT371",
.init_setup = init_setup_hpt371,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+ .udma_mask = HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 4 */
.name = "HPT374",
.init_setup = init_setup_hpt374,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2, /* 4 */
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+ .udma_mask = 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 5 */
.name = "HPT372N",
.init_setup = init_setup_hpt372n,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2, /* 4 */
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+ .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
}
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 11:53:18 +0000