diff options
Diffstat (limited to 'drivers/ide/pci/serverworks.c')
-rw-r--r-- | drivers/ide/pci/serverworks.c | 219 |
1 files changed, 68 insertions, 151 deletions
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index d9c4fd1ae99..9fead2e7d4c 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/serverworks.c Version 0.11 Jun 2 2007 + * linux/drivers/ide/pci/serverworks.c Version 0.22 Jun 27 2007 * * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz @@ -55,7 +55,6 @@ static const char *svwks_bad_ata100[] = { NULL }; -static u8 svwks_revision = 0; static struct pci_dev *isa_dev; static int check_in_drive_lists (ide_drive_t *drive, const char **list) @@ -71,9 +70,6 @@ static u8 svwks_udma_filter(ide_drive_t *drive) struct pci_dev *dev = HWIF(drive)->pci_dev; u8 mask = 0; - if (!svwks_revision) - pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) return 0x1f; if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { @@ -88,9 +84,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive) return 0; /* Check the OSB4 DMA33 enable bit */ return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; - } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { + } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { return 0x07; - } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { + } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { u8 btr = 0, mode; pci_read_config_byte(dev, 0x5A, &btr); mode = btr & 0x3; @@ -127,23 +123,45 @@ static u8 svwks_csb_check (struct pci_dev *dev) } return 0; } + +static void svwks_tune_pio(ide_drive_t *drive, const u8 pio) +{ + static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; + static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; + + struct pci_dev *dev = drive->hwif->pci_dev; + + pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]); + + if (svwks_csb_check(dev)) { + u16 csb_pio = 0; + + pci_read_config_word(dev, 0x4a, &csb_pio); + + csb_pio &= ~(0x0f << (4 * drive->dn)); + csb_pio |= (pio << (4 * drive->dn)); + + pci_write_config_word(dev, 0x4a, csb_pio); + } +} + static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) { static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; - static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; - static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u8 speed = ide_rate_filter(drive, xferspeed); - u8 pio = ide_get_best_pio_mode(drive, 255, 4, NULL); u8 unit = (drive->select.b.unit & 0x01); - u8 csb5 = svwks_csb_check(dev); - u8 ultra_enable = 0, ultra_timing = 0; - u8 dma_timing = 0, pio_timing = 0; - u16 csb5_pio = 0; + + u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; + + if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) { + svwks_tune_pio(drive, speed - XFER_PIO_0); + return ide_config_drive_speed(drive, speed); + } /* If we are about to put a disk into UDMA mode we screwed up. Our code assumes we never _ever_ do this on an OSB4 */ @@ -151,106 +169,17 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) if(dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4 && drive->media == ide_disk && speed >= XFER_UDMA_0) BUG(); - - pci_read_config_byte(dev, drive_pci[drive->dn], &pio_timing); - pci_read_config_byte(dev, drive_pci2[drive->dn], &dma_timing); + pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing); - pci_read_config_word(dev, 0x4A, &csb5_pio); pci_read_config_byte(dev, 0x54, &ultra_enable); - /* If we are in RAID mode (eg AMI MegaIDE) then we can't it - turns out trust the firmware configuration */ - - if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) - goto oem_setup_failed; - - /* Per Specified Design by OEM, and ASIC Architect */ - if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { - if (!drive->init_speed) { - u8 dma_stat = inb(hwif->dma_status); - - if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) && - ((dma_stat & (1<<(5+unit))) == (1<<(5+unit)))) { - drive->current_speed = drive->init_speed = XFER_UDMA_0 + udma_modes[(ultra_timing >> (4*unit)) & ~(0xF0)]; - return 0; - } else if ((dma_timing) && - ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) { - u8 dmaspeed; - - switch (dma_timing & 0x77) { - case 0x20: - dmaspeed = XFER_MW_DMA_2; - break; - case 0x21: - dmaspeed = XFER_MW_DMA_1; - break; - case 0x77: - dmaspeed = XFER_MW_DMA_0; - break; - default: - goto dma_pio; - } - - drive->current_speed = drive->init_speed = dmaspeed; - return 0; - } -dma_pio: - if (pio_timing) { - u8 piospeed; - - switch (pio_timing & 0x7f) { - case 0x20: - piospeed = XFER_PIO_4; - break; - case 0x22: - piospeed = XFER_PIO_3; - break; - case 0x34: - piospeed = XFER_PIO_2; - break; - case 0x47: - piospeed = XFER_PIO_1; - break; - case 0x5d: - piospeed = XFER_PIO_0; - break; - default: - goto oem_setup_failed; - } - - drive->current_speed = drive->init_speed = piospeed; - return 0; - } - } - } - -oem_setup_failed: - - pio_timing = 0; - dma_timing = 0; ultra_timing &= ~(0x0F << (4*unit)); ultra_enable &= ~(0x01 << drive->dn); - csb5_pio &= ~(0x0F << (4*drive->dn)); switch(speed) { - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - pio_timing |= pio_modes[speed - XFER_PIO_0]; - csb5_pio |= ((speed - XFER_PIO_0) << (4*drive->dn)); - break; - case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_MW_DMA_0: - /* - * TODO: always setup PIO mode so this won't be needed - */ - pio_timing |= pio_modes[pio]; - csb5_pio |= (pio << (4*drive->dn)); dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; break; @@ -260,11 +189,6 @@ oem_setup_failed: case XFER_UDMA_2: case XFER_UDMA_1: case XFER_UDMA_0: - /* - * TODO: always setup PIO mode so this won't be needed - */ - pio_timing |= pio_modes[pio]; - csb5_pio |= (pio << (4*drive->dn)); dma_timing |= dma_modes[2]; ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit)); ultra_enable |= (0x01 << drive->dn); @@ -272,10 +196,6 @@ oem_setup_failed: break; } - pci_write_config_byte(dev, drive_pci[drive->dn], pio_timing); - if (csb5) - pci_write_config_word(dev, 0x4A, csb5_pio); - pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing); pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing); pci_write_config_byte(dev, 0x54, ultra_enable); @@ -285,8 +205,9 @@ oem_setup_failed: static void svwks_tune_drive (ide_drive_t *drive, u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); - (void)svwks_tune_chipset(drive, XFER_PIO_0 + pio); + pio = ide_get_best_pio_mode(drive, pio, 4); + svwks_tune_pio(drive, pio); + (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } static int svwks_config_drive_xfer_rate (ide_drive_t *drive) @@ -307,9 +228,6 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha unsigned int reg; u8 btr; - /* save revision id to determine DMA capability */ - pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); - /* force Master Latency Timer value to 64 PCICLKs */ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); @@ -388,7 +306,7 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha if (!(PCI_FUNC(dev->devfn) & 1)) btr |= 0x2; else - btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(dev, 0x5A, btr); } /* Setup HT1000 SouthBridge Controller - Single Channel Only */ @@ -402,9 +320,9 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha return dev->irq; } -static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif) { - return 1; + return ATA_CBL_PATA80; } /* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits @@ -414,7 +332,7 @@ static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif) * Bit 14 clear = primary IDE channel does not have 80-pin cable. * Bit 14 set = primary IDE channel has 80-pin cable. */ -static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL && @@ -422,8 +340,8 @@ static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif) (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE || dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE)) return ((1 << (hwif->channel + 14)) & - dev->subsystem_device) ? 1 : 0; - return 0; + dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; + return ATA_CBL_PATA40; } /* Sun Cobalt Alpine hardware avoids the 80-pin cable @@ -432,18 +350,18 @@ static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif) * * WARNING: this only works on Alpine hardware! */ -static unsigned int __devinit ata66_svwks_cobalt (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN && dev->vendor == PCI_VENDOR_ID_SERVERWORKS && dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) return ((1 << (hwif->channel + 14)) & - dev->subsystem_device) ? 1 : 0; - return 0; + dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; + return ATA_CBL_PATA40; } -static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; @@ -462,15 +380,13 @@ static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif) /* Per Specified Design by OEM, and ASIC Architect */ if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) - return 1; + return ATA_CBL_PATA80; - return 0; + return ATA_CBL_PATA40; } static void __devinit init_hwif_svwks (ide_hwif_t *hwif) { - u8 dma_stat = 0; - if (!hwif->irq) hwif->irq = hwif->channel ? 15 : 14; @@ -487,25 +403,21 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) hwif->autodma = 0; - if (!hwif->dma_base) { - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + + if (!hwif->dma_base) return; - } hwif->ide_dma_check = &svwks_config_drive_xfer_rate; if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - if (!hwif->udma_four) - hwif->udma_four = ata66_svwks(hwif); + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_svwks(hwif); } if (!noautodma) hwif->autodma = 1; - dma_stat = inb(hwif->dma_status); - hwif->drives[0].autodma = (dma_stat & 0x20); - hwif->drives[1].autodma = (dma_stat & 0x40); - hwif->drives[0].autotune = (!(dma_stat & 0x20)); - hwif->drives[1].autotune = (!(dma_stat & 0x40)); + hwif->drives[0].autodma = hwif->drives[1].autodma = 1; } static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d) @@ -521,9 +433,12 @@ static int __devinit init_setup_csb6 (struct pci_dev *dev, ide_pci_device_t *d) d->bootable = ON_BOARD; } - d->channels = ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE || - dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) && - (!(PCI_FUNC(dev->devfn) & 1))) ? 1 : 2; + if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE || + dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) && + (!(PCI_FUNC(dev->devfn) & 1))) + d->host_flags |= IDE_HFLAG_SINGLE; + else + d->host_flags &= ~IDE_HFLAG_SINGLE; return ide_setup_pci_device(dev, d); } @@ -534,41 +449,43 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = { .init_setup = init_setup_svwks, .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .channels = 2, .autodma = AUTODMA, .bootable = ON_BOARD, + .pio_mask = ATA_PIO4, },{ /* 1 */ .name = "SvrWks CSB5", .init_setup = init_setup_svwks, .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .channels = 2, .autodma = AUTODMA, .bootable = ON_BOARD, + .pio_mask = ATA_PIO4, },{ /* 2 */ .name = "SvrWks CSB6", .init_setup = init_setup_csb6, .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .channels = 2, .autodma = AUTODMA, .bootable = ON_BOARD, + .pio_mask = ATA_PIO4, },{ /* 3 */ .name = "SvrWks CSB6", .init_setup = init_setup_csb6, .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .channels = 1, /* 2 */ .autodma = AUTODMA, .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_SINGLE, + .pio_mask = ATA_PIO4, },{ /* 4 */ .name = "SvrWks HT1000", .init_setup = init_setup_svwks, .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .channels = 1, /* 2 */ .autodma = AUTODMA, .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_SINGLE, + .pio_mask = ATA_PIO4, } }; |