aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/tc86c001.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/tc86c001.c')
-rw-r--r--drivers/ide/pci/tc86c001.c270
1 files changed, 0 insertions, 270 deletions
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
deleted file mode 100644
index 93e2cce4b29..00000000000
--- a/drivers/ide/pci/tc86c001.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2002 Toshiba Corporation
- * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "tc86c001"
-
-static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
- u16 mode, scr = inw(scr_port);
-
- switch (speed) {
- case XFER_UDMA_4: mode = 0x00c0; break;
- case XFER_UDMA_3: mode = 0x00b0; break;
- case XFER_UDMA_2: mode = 0x00a0; break;
- case XFER_UDMA_1: mode = 0x0090; break;
- case XFER_UDMA_0: mode = 0x0080; break;
- case XFER_MW_DMA_2: mode = 0x0070; break;
- case XFER_MW_DMA_1: mode = 0x0060; break;
- case XFER_MW_DMA_0: mode = 0x0050; break;
- case XFER_PIO_4: mode = 0x0400; break;
- case XFER_PIO_3: mode = 0x0300; break;
- case XFER_PIO_2: mode = 0x0200; break;
- case XFER_PIO_1: mode = 0x0100; break;
- case XFER_PIO_0:
- default: mode = 0x0000; break;
- }
-
- scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
- scr |= mode;
- outw(scr, scr_port);
-}
-
-static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- tc86c001_set_mode(drive, XFER_PIO_0 + pio);
-}
-
-/*
- * HACKITY HACK
- *
- * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
- * if a DMA transfer terminates prematurely, the controller leaves the device's
- * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
- * set the interrupt bit in the DMA status register), thus no PCI interrupt
- * will occur until a DMA transfer has been successfully completed.
- *
- * We work around this by initiating dummy, zero-length DMA transfer on
- * a DMA timeout expiration. I found no better way to do this with the current
- * IDE core than to temporarily replace a higher level driver's timer expiry
- * handler with our own backing up to that handler in case our recovery fails.
- */
-static int tc86c001_timer_expiry(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- ide_expiry_t *expiry = ide_get_hwifdata(hwif);
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-
- /* Restore a higher level driver's expiry handler first. */
- hwgroup->expiry = expiry;
-
- if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
- unsigned long sc_base = hwif->config_data;
- unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- u8 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
-
- printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
- "attempting recovery...\n", drive->name);
-
- /* Stop DMA */
- outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
-
- /* Setup the dummy DMA transfer */
- outw(0, sc_base + 0x0a); /* Sector Count */
- outw(0, twcr_port); /* Transfer Word Count 1 or 2 */
-
- /* Start the dummy DMA transfer */
-
- /* clear R_OR_WCTR for write */
- outb(0x00, hwif->dma_base + ATA_DMA_CMD);
- /* set START_STOPBM */
- outb(0x01, hwif->dma_base + ATA_DMA_CMD);
-
- /*
- * If an interrupt was pending, it should come thru shortly.
- * If not, a higher level driver's expiry handler should
- * eventually cause some kind of recovery from the DMA stall.
- */
- return WAIT_MIN_SLEEP;
- }
-
- /* Chain to the restored expiry handler if DMA wasn't active. */
- if (likely(expiry != NULL))
- return expiry(drive);
-
- /* If there was no handler, "emulate" that for ide_timer_expiry()... */
- return -1;
-}
-
-static void tc86c001_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
- unsigned long sc_base = hwif->config_data;
- unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- unsigned long nsectors = hwgroup->rq->nr_sectors;
-
- /*
- * We have to manually load the sector count and size into
- * the appropriate system control registers for DMA to work
- * with LBA48 and ATAPI devices...
- */
- outw(nsectors, sc_base + 0x0a); /* Sector Count */
- outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
-
- /* Install our timeout expiry hook, saving the current handler... */
- ide_set_hwifdata(hwif, hwgroup->expiry);
- hwgroup->expiry = &tc86c001_timer_expiry;
-
- ide_dma_start(drive);
-}
-
-static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long sc_base = pci_resource_start(dev, 5);
- u16 scr1 = inw(sc_base + 0x00);
-
- /*
- * System Control 1 Register bit 13 (PDIAGN):
- * 0=80-pin cable, 1=40-pin cable
- */
- return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long sc_base = pci_resource_start(dev, 5);
- u16 scr1 = inw(sc_base + 0x00);
-
- /* System Control 1 Register bit 15 (Soft Reset) set */
- outw(scr1 | 0x8000, sc_base + 0x00);
-
- /* System Control 1 Register bit 14 (FIFO Reset) set */
- outw(scr1 | 0x4000, sc_base + 0x00);
-
- /* System Control 1 Register: reset clear */
- outw(scr1 & ~0xc000, sc_base + 0x00);
-
- /* Store the system control register base for convenience... */
- hwif->config_data = sc_base;
-
- if (!hwif->dma_base)
- return;
-
- /*
- * Sector Count Control Register bits 0 and 1 set:
- * software sets Sector Count Register for master and slave device
- */
- outw(0x0003, sc_base + 0x0c);
-
- /* Sector Count Register limit */
- hwif->rqsize = 0xffff;
-}
-
-static const struct ide_port_ops tc86c001_port_ops = {
- .set_pio_mode = tc86c001_set_pio_mode,
- .set_dma_mode = tc86c001_set_mode,
- .cable_detect = tc86c001_cable_detect,
-};
-
-static const struct ide_dma_ops tc86c001_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = tc86c001_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info tc86c001_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_tc86c001,
- .port_ops = &tc86c001_port_ops,
- .dma_ops = &tc86c001_dma_ops,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
-};
-
-static int __devinit tc86c001_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- goto out;
-
- rc = pci_request_region(dev, 5, DRV_NAME);
- if (rc) {
- printk(KERN_ERR DRV_NAME ": system control regs already in use");
- goto out_disable;
- }
-
- rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
- if (rc)
- goto out_release;
-
- goto out;
-
-out_release:
- pci_release_region(dev, 5);
-out_disable:
- pci_disable_device(dev);
-out:
- return rc;
-}
-
-static void __devexit tc86c001_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_release_region(dev, 5);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id tc86c001_pci_tbl[] = {
- { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
-
-static struct pci_driver tc86c001_pci_driver = {
- .name = "TC86C001",
- .id_table = tc86c001_pci_tbl,
- .probe = tc86c001_init_one,
- .remove = __devexit_p(tc86c001_remove),
-};
-
-static int __init tc86c001_ide_init(void)
-{
- return ide_pci_register_driver(&tc86c001_pci_driver);
-}
-
-static void __exit tc86c001_ide_exit(void)
-{
- pci_unregister_driver(&tc86c001_pci_driver);
-}
-
-module_init(tc86c001_ide_init);
-module_exit(tc86c001_ide_exit);
-
-MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
-MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 07:11:36 +0000