diff options
Diffstat (limited to 'drivers/ide/pci')
36 files changed, 0 insertions, 15275 deletions
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile deleted file mode 100644 index 02e6ee7d751..00000000000 --- a/drivers/ide/pci/Makefile +++ /dev/null @@ -1,44 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o -obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o -obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o -obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o -obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o -obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o -obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o -obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o -obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o -obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o -obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o -obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o -obj-$(CONFIG_BLK_DEV_HPT34X) += hpt34x.o -obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o -obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o -obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o -obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o -obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o -obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o -obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o -obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o -obj-$(CONFIG_BLK_DEV_PIIX) += piix.o -obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o -obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o -obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o -obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o -obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o -obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o -obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o -obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o -obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o -obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o -obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o - -# Must appear at the end of the block -obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o -ide-pci-generic-y += generic.o - -ifeq ($(CONFIG_BLK_DEV_CMD640), m) - obj-m += cmd640.o -endif - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c deleted file mode 100644 index 4142c698e0d..00000000000 --- a/drivers/ide/pci/aec62xx.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "aec62xx" - -struct chipset_bus_clock_list_entry { - u8 xfer_speed; - u8 chipset_settings; - u8 ultra_settings; -}; - -static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = { - { XFER_UDMA_6, 0x31, 0x07 }, - { XFER_UDMA_5, 0x31, 0x06 }, - { XFER_UDMA_4, 0x31, 0x05 }, - { XFER_UDMA_3, 0x31, 0x04 }, - { XFER_UDMA_2, 0x31, 0x03 }, - { XFER_UDMA_1, 0x31, 0x02 }, - { XFER_UDMA_0, 0x31, 0x01 }, - - { XFER_MW_DMA_2, 0x31, 0x00 }, - { XFER_MW_DMA_1, 0x31, 0x00 }, - { XFER_MW_DMA_0, 0x0a, 0x00 }, - { XFER_PIO_4, 0x31, 0x00 }, - { XFER_PIO_3, 0x33, 0x00 }, - { XFER_PIO_2, 0x08, 0x00 }, - { XFER_PIO_1, 0x0a, 0x00 }, - { XFER_PIO_0, 0x00, 0x00 }, - { 0, 0x00, 0x00 } -}; - -static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { - { XFER_UDMA_6, 0x41, 0x06 }, - { XFER_UDMA_5, 0x41, 0x05 }, - { XFER_UDMA_4, 0x41, 0x04 }, - { XFER_UDMA_3, 0x41, 0x03 }, - { XFER_UDMA_2, 0x41, 0x02 }, - { XFER_UDMA_1, 0x41, 0x01 }, - { XFER_UDMA_0, 0x41, 0x01 }, - - { XFER_MW_DMA_2, 0x41, 0x00 }, - { XFER_MW_DMA_1, 0x42, 0x00 }, - { XFER_MW_DMA_0, 0x7a, 0x00 }, - { XFER_PIO_4, 0x41, 0x00 }, - { XFER_PIO_3, 0x43, 0x00 }, - { XFER_PIO_2, 0x78, 0x00 }, - { XFER_PIO_1, 0x7a, 0x00 }, - { XFER_PIO_0, 0x70, 0x00 }, - { 0, 0x00, 0x00 } -}; - -/* - * TO DO: active tuning and correction of cards without a bios. - */ -static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) -{ - for ( ; chipset_table->xfer_speed ; chipset_table++) - if (chipset_table->xfer_speed == speed) { - return chipset_table->chipset_settings; - } - return chipset_table->chipset_settings; -} - -static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) -{ - for ( ; chipset_table->xfer_speed ; chipset_table++) - if (chipset_table->xfer_speed == speed) { - return chipset_table->ultra_settings; - } - return chipset_table->ultra_settings; -} - -static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; - u16 d_conf = 0; - u8 ultra = 0, ultra_conf = 0; - u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; - unsigned long flags; - - local_irq_save(flags); - /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */ - pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf); - tmp0 = pci_bus_clock_list(speed, bus_clock); - d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf); - pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf); - - tmp1 = 0x00; - tmp2 = 0x00; - pci_read_config_byte(dev, 0x54, &ultra); - tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn)))); - ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock); - tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn)))); - pci_write_config_byte(dev, 0x54, tmp2); - local_irq_restore(flags); -} - -static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; - u8 unit = drive->dn & 1; - u8 tmp1 = 0, tmp2 = 0; - u8 ultra = 0, drive_conf = 0, ultra_conf = 0; - unsigned long flags; - - local_irq_save(flags); - /* high 4-bits: Active, low 4-bits: Recovery */ - pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf); - drive_conf = pci_bus_clock_list(speed, bus_clock); - pci_write_config_byte(dev, 0x40|drive->dn, drive_conf); - - pci_read_config_byte(dev, (0x44|hwif->channel), &ultra); - tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit)))); - ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock); - tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit)))); - pci_write_config_byte(dev, (0x44|hwif->channel), tmp2); - local_irq_restore(flags); -} - -static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); -} - -static unsigned int init_chipset_aec62xx(struct pci_dev *dev) -{ - /* These are necessary to get AEC6280 Macintosh cards to work */ - if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) || - (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) { - u8 reg49h = 0, reg4ah = 0; - /* Clear reset and test bits. */ - pci_read_config_byte(dev, 0x49, ®49h); - pci_write_config_byte(dev, 0x49, reg49h & ~0x30); - /* Enable chip interrupt output. */ - pci_read_config_byte(dev, 0x4a, ®4ah); - pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01); - /* Enable burst mode. */ - pci_read_config_byte(dev, 0x4a, ®4ah); - pci_write_config_byte(dev, 0x4a, reg4ah | 0x80); - } - - return dev->irq; -} - -static u8 atp86x_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01; - - pci_read_config_byte(dev, 0x49, &ata66); - - return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; -} - -static const struct ide_port_ops atp850_port_ops = { - .set_pio_mode = aec_set_pio_mode, - .set_dma_mode = aec6210_set_mode, -}; - -static const struct ide_port_ops atp86x_port_ops = { - .set_pio_mode = aec_set_pio_mode, - .set_dma_mode = aec6260_set_mode, - .cable_detect = atp86x_cable_detect, -}; - -static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { - { /* 0: AEC6210 */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .port_ops = &atp850_port_ops, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_NO_DSC | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, - }, - { /* 1: AEC6260 */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA4, - }, - { /* 2: AEC6260R */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_NON_BOOTABLE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA4, - }, - { /* 3: AEC6280 */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - }, - { /* 4: AEC6280R */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - } -}; - -/** - * aec62xx_init_one - called when a AEC is found - * @dev: the aec62xx device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - * - * NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R] - * chips, pass a local copy of 'struct ide_port_info' down the call chain. - */ - -static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct chipset_bus_clock_list_entry *bus_clock; - struct ide_port_info d; - u8 idx = id->driver_data; - int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - int err; - - if (bus_speed <= 33) - bus_clock = aec6xxx_33_base; - else - bus_clock = aec6xxx_34_base; - - err = pci_enable_device(dev); - if (err) - return err; - - d = aec62xx_chipsets[idx]; - - if (idx == 3 || idx == 4) { - unsigned long dma_base = pci_resource_start(dev, 4); - - if (inb(dma_base + 2) & 0x10) { - printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected" - "\n", pci_name(dev), (idx == 4) ? "R" : ""); - d.udma_mask = ATA_UDMA6; - } - } - - err = ide_pci_init_one(dev, &d, (void *)bus_clock); - if (err) - pci_disable_device(dev); - - return err; -} - -static void __devexit aec62xx_remove(struct pci_dev *dev) -{ - ide_pci_remove(dev); - pci_disable_device(dev); -} - -static const struct pci_device_id aec62xx_pci_tbl[] = { - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); - -static struct pci_driver aec62xx_pci_driver = { - .name = "AEC62xx_IDE", - .id_table = aec62xx_pci_tbl, - .probe = aec62xx_init_one, - .remove = __devexit_p(aec62xx_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init aec62xx_ide_init(void) -{ - return ide_pci_register_driver(&aec62xx_pci_driver); -} - -static void __exit aec62xx_ide_exit(void) -{ - pci_unregister_driver(&aec62xx_pci_driver); -} - -module_init(aec62xx_ide_init); -module_exit(aec62xx_ide_exit); - -MODULE_AUTHOR("Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c deleted file mode 100644 index daf9dce39e5..00000000000 --- a/drivers/ide/pci/alim15x3.c +++ /dev/null @@ -1,602 +0,0 @@ -/* - * Copyright (C) 1998-2000 Michel Aubry, Maintainer - * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer - * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer - * - * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) - * May be copied or modified under the terms of the GNU General Public License - * Copyright (C) 2002 Alan Cox <alan@redhat.com> - * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> - * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> - * - * (U)DMA capable version of ali 1533/1543(C), 1535(D) - * - ********************************************************************** - * 9/7/99 --Parts from the above author are included and need to be - * converted into standard interface, once I finish the thought. - * - * Recent changes - * Don't use LBA48 mode on ALi <= 0xC4 - * Don't poke 0x79 with a non ALi northbridge - * Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang) - * Allow UDMA6 on revisions > 0xC4 - * - * Documentation - * Chipset documentation available under NDA only - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> -#include <linux/dmi.h> - -#include <asm/io.h> - -#define DRV_NAME "alim15x3" - -/* - * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking - * (this is DANGEROUS and could result in data corruption). - */ -static int wdc_udma; - -module_param(wdc_udma, bool, 0); -MODULE_PARM_DESC(wdc_udma, - "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)"); - -/* - * ALi devices are not plug in. Otherwise these static values would - * need to go. They ought to go away anyway - */ - -static u8 m5229_revision; -static u8 chip_is_1543c_e; -static struct pci_dev *isa_dev; - -/** - * ali_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Program the controller for the given PIO mode. - */ - -static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - int s_time = t->setup, a_time = t->active, c_time = t->cycle; - u8 s_clc, a_clc, r_clc; - unsigned long flags; - int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - int port = hwif->channel ? 0x5c : 0x58; - int portFIFO = hwif->channel ? 0x55 : 0x54; - u8 cd_dma_fifo = 0, unit = drive->dn & 1; - - if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) - s_clc = 0; - if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) - a_clc = 0; - - if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { - r_clc = 1; - } else { - if (r_clc >= 16) - r_clc = 0; - } - local_irq_save(flags); - - /* - * PIO mode => ATA FIFO on, ATAPI FIFO off - */ - pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); - if (drive->media==ide_disk) { - if (unit) { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); - } else { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); - } - } else { - if (unit) { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); - } else { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); - } - } - - pci_write_config_byte(dev, port, s_clc); - pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc); - local_irq_restore(flags); -} - -/** - * ali_udma_filter - compute UDMA mask - * @drive: IDE device - * - * Return available UDMA modes. - * - * The actual rules for the ALi are: - * No UDMA on revisions <= 0x20 - * Disk only for revisions < 0xC2 - * Not WDC drives on M1543C-E (?) - */ - -static u8 ali_udma_filter(ide_drive_t *drive) -{ - if (m5229_revision > 0x20 && m5229_revision < 0xC2) { - if (drive->media != ide_disk) - return 0; - if (wdc_udma == 0 && chip_is_1543c_e && - strstr((char *)&drive->id[ATA_ID_PROD], "WDC ")) - return 0; - } - - return drive->hwif->ultra_mask; -} - -/** - * ali_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Configure the hardware for the desired IDE transfer mode. - */ - -static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 speed1 = speed; - u8 unit = drive->dn & 1; - u8 tmpbyte = 0x00; - int m5229_udma = (hwif->channel) ? 0x57 : 0x56; - - if (speed == XFER_UDMA_6) - speed1 = 0x47; - - if (speed < XFER_UDMA_0) { - u8 ultra_enable = (unit) ? 0x7f : 0xf7; - /* - * clear "ultra enable" bit - */ - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= ultra_enable; - pci_write_config_byte(dev, m5229_udma, tmpbyte); - - /* - * FIXME: Oh, my... DMA timings are never set. - */ - } else { - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= (0x0f << ((1-unit) << 2)); - /* - * enable ultra dma and set timing - */ - tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); - pci_write_config_byte(dev, m5229_udma, tmpbyte); - if (speed >= XFER_UDMA_3) { - pci_read_config_byte(dev, 0x4b, &tmpbyte); - tmpbyte |= 1; - pci_write_config_byte(dev, 0x4b, tmpbyte); - } - } -} - -/** - * ali15x3_dma_setup - begin a DMA phase - * @drive: target device - * - * Returns 1 if the DMA cannot be performed, zero on success. - */ - -static int ali15x3_dma_setup(ide_drive_t *drive) -{ - if (m5229_revision < 0xC2 && drive->media != ide_disk) { - if (rq_data_dir(drive->hwif->hwgroup->rq)) - return 1; /* try PIO instead of DMA */ - } - return ide_dma_setup(drive); -} - -/** - * init_chipset_ali15x3 - Initialise an ALi IDE controller - * @dev: PCI device - * - * This function initializes the ALI IDE controller and where - * appropriate also sets up the 1533 southbridge. - */ - -static unsigned int init_chipset_ali15x3(struct pci_dev *dev) -{ - unsigned long flags; - u8 tmpbyte; - struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0)); - - m5229_revision = dev->revision; - - isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); - - local_irq_save(flags); - - if (m5229_revision < 0xC2) { - /* - * revision 0x20 (1543-E, 1543-F) - * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E) - * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7 - */ - pci_read_config_byte(dev, 0x4b, &tmpbyte); - /* - * clear bit 7 - */ - pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); - /* - * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 - */ - if (m5229_revision >= 0x20 && isa_dev) { - pci_read_config_byte(isa_dev, 0x5e, &tmpbyte); - chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0; - } - goto out; - } - - /* - * 1543C-B?, 1535, 1535D, 1553 - * Note 1: not all "motherboard" support this detection - * Note 2: if no udma 66 device, the detection may "error". - * but in this case, we will not set the device to - * ultra 66, the detection result is not important - */ - - /* - * enable "Cable Detection", m5229, 0x4b, bit3 - */ - pci_read_config_byte(dev, 0x4b, &tmpbyte); - pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08); - - /* - * We should only tune the 1533 enable if we are using an ALi - * North bridge. We might have no north found on some zany - * box without a device at 0:0.0. The ALi bridge will be at - * 0:0.0 so if we didn't find one we know what is cooking. - */ - if (north && north->vendor != PCI_VENDOR_ID_AL) - goto out; - - if (m5229_revision < 0xC5 && isa_dev) - { - /* - * set south-bridge's enable bit, m1533, 0x79 - */ - - pci_read_config_byte(isa_dev, 0x79, &tmpbyte); - if (m5229_revision == 0xC2) { - /* - * 1543C-B0 (m1533, 0x79, bit 2) - */ - pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04); - } else if (m5229_revision >= 0xC3) { - /* - * 1553/1535 (m1533, 0x79, bit 1) - */ - pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); - } - } - -out: - /* - * CD_ROM DMA on (m5229, 0x53, bit0) - * Enable this bit even if we want to use PIO. - * PIO FIFO off (m5229, 0x53, bit1) - * The hardware will use 0x54h and 0x55h to control PIO FIFO. - * (Not on later devices it seems) - * - * 0x53 changes meaning on later revs - we must no touch - * bit 1 on them. Need to check if 0x20 is the right break. - */ - if (m5229_revision >= 0x20) { - pci_read_config_byte(dev, 0x53, &tmpbyte); - - if (m5229_revision <= 0x20) - tmpbyte = (tmpbyte & (~0x02)) | 0x01; - else if (m5229_revision == 0xc7 || m5229_revision == 0xc8) - tmpbyte |= 0x03; - else - tmpbyte |= 0x01; - - pci_write_config_byte(dev, 0x53, tmpbyte); - } - pci_dev_put(north); - pci_dev_put(isa_dev); - local_irq_restore(flags); - return 0; -} - -/* - * Cable special cases - */ - -static const struct dmi_system_id cable_dmi_table[] = { - { - .ident = "HP Pavilion N5430", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), - }, - }, - { - .ident = "Toshiba Satellite S1800-814", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), - }, - }, - { } -}; - -static int ali_cable_override(struct pci_dev *pdev) -{ - /* Fujitsu P2000 */ - if (pdev->subsystem_vendor == 0x10CF && - pdev->subsystem_device == 0x10AF) - return 1; - - /* Mitac 8317 (Winbook-A) and relatives */ - if (pdev->subsystem_vendor == 0x1071 && - pdev->subsystem_device == 0x8317) - return 1; - - /* Systems by DMI */ - if (dmi_check_system(cable_dmi_table)) - return 1; - - return 0; -} - -/** - * ali_cable_detect - cable detection - * @hwif: IDE interface - * - * This checks if the controller and the cable are capable - * of UDMA66 transfers. It doesn't check the drives. - * But see note 2 below! - * - * FIXME: frobs bits that are not defined on newer ALi devicea - */ - -static u8 ali_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long flags; - u8 cbl = ATA_CBL_PATA40, tmpbyte; - - local_irq_save(flags); - - if (m5229_revision >= 0xC2) { - /* - * m5229 80-pin cable detection (from Host View) - * - * 0x4a bit0 is 0 => primary channel has 80-pin - * 0x4a bit1 is 0 => secondary channel has 80-pin - * - * Certain laptops use short but suitable cables - * and don't implement the detect logic. - */ - if (ali_cable_override(dev)) - cbl = ATA_CBL_PATA40_SHORT; - else { - pci_read_config_byte(dev, 0x4a, &tmpbyte); - if ((tmpbyte & (1 << hwif->channel)) == 0) - cbl = ATA_CBL_PATA80; - } - } - - local_irq_restore(flags); - - return cbl; -} - -#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) -/** - * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff - * @hwif: interface to configure - * - * Obtain the IRQ tables for an ALi based IDE solution on the PC - * class platforms. This part of the code isn't applicable to the - * Sparc and PowerPC systems. - */ - -static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 ideic, inmir; - s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, - 1, 11, 0, 12, 0, 14, 0, 15 }; - int irq = -1; - - if (dev->device == PCI_DEVICE_ID_AL_M5229) - hwif->irq = hwif->channel ? 15 : 14; - - if (isa_dev) { - /* - * read IDE interface control - */ - pci_read_config_byte(isa_dev, 0x58, &ideic); - - /* bit0, bit1 */ - ideic = ideic & 0x03; - - /* get IRQ for IDE Controller */ - if ((hwif->channel && ideic == 0x03) || - (!hwif->channel && !ideic)) { - /* - * get SIRQ1 routing table - */ - pci_read_config_byte(isa_dev, 0x44, &inmir); - inmir = inmir & 0x0f; - irq = irq_routing_table[inmir]; - } else if (hwif->channel && !(ideic & 0x01)) { - /* - * get SIRQ2 routing table - */ - pci_read_config_byte(isa_dev, 0x75, &inmir); - inmir = inmir & 0x0f; - irq = irq_routing_table[inmir]; - } - if(irq >= 0) - hwif->irq = irq; - } -} -#else -#define init_hwif_ali15x3 NULL -#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ - -/** - * init_dma_ali15x3 - set up DMA on ALi15x3 - * @hwif: IDE interface - * @d: IDE port info - * - * Set up the DMA functionality on the ALi 15x3. - */ - -static int __devinit init_dma_ali15x3(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long base = ide_pci_dma_base(hwif, d); - - if (base == 0) - return -1; - - hwif->dma_base = base; - - if (ide_pci_check_simplex(hwif, d) < 0) - return -1; - - if (ide_pci_set_master(dev, d->name) < 0) - return -1; - - if (!hwif->channel) - outb(inb(base + 2) & 0x60, base + 2); - - printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", - hwif->name, base, base + 7); - - if (ide_allocate_dma_engine(hwif)) - return -1; - - hwif->dma_ops = &sff_dma_ops; - - return 0; -} - -static const struct ide_port_ops ali_port_ops = { - .set_pio_mode = ali_set_pio_mode, - .set_dma_mode = ali_set_dma_mode, - .udma_filter = ali_udma_filter, - .cable_detect = ali_cable_detect, -}; - -static const struct ide_dma_ops ali_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ali15x3_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = ide_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info ali15x3_chipset __devinitdata = { - .name = DRV_NAME, - .init_chipset = init_chipset_ali15x3, - .init_hwif = init_hwif_ali15x3, - .init_dma = init_dma_ali15x3, - .port_ops = &ali_port_ops, - .pio_mask = ATA_PIO5, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, -}; - -/** - * alim15x3_init_one - set up an ALi15x3 IDE controller - * @dev: PCI device to set up - * - * Perform the actual set up for an ALi15x3 that has been found by the - * hot plug layer. - */ - -static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_port_info d = ali15x3_chipset; - u8 rev = dev->revision, idx = id->driver_data; - - /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ - if (rev <= 0xC4) - d.host_flags |= IDE_HFLAG_NO_LBA48_DMA; - - if (rev >= 0x20) { - if (rev == 0x20) - d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - - if (rev < 0xC2) - d.udma_mask = ATA_UDMA2; - else if (rev == 0xC2 || rev == 0xC3) - d.udma_mask = ATA_UDMA4; - else if (rev == 0xC4) - d.udma_mask = ATA_UDMA5; - else - d.udma_mask = ATA_UDMA6; - - d.dma_ops = &ali_dma_ops; - } else { - d.host_flags |= IDE_HFLAG_NO_DMA; - - d.mwdma_mask = d.swdma_mask = 0; - } - - if (idx == 0) - d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; - - return ide_pci_init_one(dev, &d, NULL); -} - - -static const struct pci_device_id alim15x3_pci_tbl[] = { - { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 }, - { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl); - -static struct pci_driver alim15x3_pci_driver = { - .name = "ALI15x3_IDE", - .id_table = alim15x3_pci_tbl, - .probe = alim15x3_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init ali15x3_ide_init(void) -{ - return ide_pci_register_driver(&alim15x3_pci_driver); -} - -static void __exit ali15x3_ide_exit(void) -{ - return pci_unregister_driver(&alim15x3_pci_driver); -} - -module_init(ali15x3_ide_init); -module_exit(ali15x3_ide_exit); - -MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); -MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c deleted file mode 100644 index 81ec73134ed..00000000000 --- a/drivers/ide/pci/amd74xx.c +++ /dev/null @@ -1,346 +0,0 @@ -/* - * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 - * IDE driver for Linux. - * - * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz - * - * Based on the work of: - * Andre Hedrick - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> - -#define DRV_NAME "amd74xx" - -enum { - AMD_IDE_CONFIG = 0x41, - AMD_CABLE_DETECT = 0x42, - AMD_DRIVE_TIMING = 0x48, - AMD_8BIT_TIMING = 0x4e, - AMD_ADDRESS_SETUP = 0x4c, - AMD_UDMA_TIMING = 0x50, -}; - -static unsigned int amd_80w; -static unsigned int amd_clock; - -static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; -static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 }; - -static inline u8 amd_offset(struct pci_dev *dev) -{ - return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0; -} - -/* - * amd_set_speed() writes timing values to the chipset registers - */ - -static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, - struct ide_timing *timing) -{ - u8 t = 0, offset = amd_offset(dev); - - pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); - pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t); - - pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)), - ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); - - pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn), - ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); - - switch (udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break; - case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break; - case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break; - default: return; - } - - pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); -} - -/* - * amd_set_drive() computes timing values and configures the chipset - * to a desired transfer mode. It also can be called by upper layers. - */ - -static void amd_set_drive(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - ide_drive_t *peer = hwif->drives + (~drive->dn & 1); - struct ide_timing t, p; - int T, UT; - u8 udma_mask = hwif->ultra_mask; - - T = 1000000000 / amd_clock; - UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); - - ide_timing_compute(drive, speed, &t, T, UT); - - if (peer->dev_flags & IDE_DFLAG_PRESENT) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); - ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); - } - - if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1; - if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15; - - amd_set_speed(dev, drive->dn, udma_mask, &t); -} - -/* - * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. - */ - -static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - amd_set_drive(drive, XFER_PIO_0 + pio); -} - -static void amd7409_cable_detect(struct pci_dev *dev) -{ - /* no host side cable detection */ - amd_80w = 0x03; -} - -static void amd7411_cable_detect(struct pci_dev *dev) -{ - int i; - u32 u = 0; - u8 t = 0, offset = amd_offset(dev); - - pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t); - pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u); - amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { - printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set " - "cable bits correctly. Enabling workaround.\n", - pci_name(dev)); - amd_80w |= (1 << (1 - (i >> 4))); - } -} - -/* - * The initialization callback. Initialize drive independent registers. - */ - -static unsigned int init_chipset_amd74xx(struct pci_dev *dev) -{ - u8 t = 0, offset = amd_offset(dev); - -/* - * Check 80-wire cable presence. - */ - - if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_COBRA_7401) - ; /* no UDMA > 2 */ - else if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_VIPER_7409) - amd7409_cable_detect(dev); - else - amd7411_cable_detect(dev); - -/* - * Take care of prefetch & postwrite. - */ - - pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t); - /* - * Check for broken FIFO support. - */ - if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411) - t &= 0x0f; - else - t |= 0xf0; - pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t); - - return dev->irq; -} - -static u8 amd_cable_detect(ide_hwif_t *hwif) -{ - if ((amd_80w >> hwif->channel) & 1) - return ATA_CBL_PATA80; - else - return ATA_CBL_PATA40; -} - -static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - if (hwif->irq == 0) /* 0 is bogus but will do for now */ - hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); -} - -static const struct ide_port_ops amd_port_ops = { - .set_pio_mode = amd_set_pio_mode, - .set_dma_mode = amd_set_drive, - .cable_detect = amd_cable_detect, -}; - -#define IDE_HFLAGS_AMD \ - (IDE_HFLAG_PIO_NO_BLACKLIST | \ - IDE_HFLAG_POST_SET_MODE | \ - IDE_HFLAG_IO_32BIT | \ - IDE_HFLAG_UNMASK_IRQS) - -#define DECLARE_AMD_DEV(swdma, udma) \ - { \ - .name = DRV_NAME, \ - .init_chipset = init_chipset_amd74xx, \ - .init_hwif = init_hwif_amd74xx, \ - .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ - .port_ops = &amd_port_ops, \ - .host_flags = IDE_HFLAGS_AMD, \ - .pio_mask = ATA_PIO5, \ - .swdma_mask = swdma, \ - .mwdma_mask = ATA_MWDMA2, \ - .udma_mask = udma, \ - } - -#define DECLARE_NV_DEV(udma) \ - { \ - .name = DRV_NAME, \ - .init_chipset = init_chipset_amd74xx, \ - .init_hwif = init_hwif_amd74xx, \ - .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ - .port_ops = &amd_port_ops, \ - .host_flags = IDE_HFLAGS_AMD, \ - .pio_mask = ATA_PIO5, \ - .swdma_mask = ATA_SWDMA2, \ - .mwdma_mask = ATA_MWDMA2, \ - .udma_mask = udma, \ - } - -static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { - /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2), - /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4), - /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), - /* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6), - - /* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5), - /* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6), - - /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), -}; - -static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_port_info d; - u8 idx = id->driver_data; - - d = amd74xx_chipsets[idx]; - - /* - * Check for bad SWDMA and incorrectly wired Serenade mainboards. - */ - if (idx == 1) { - if (dev->revision <= 7) - d.swdma_mask = 0; - d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; - } else if (idx == 3) { - if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD && - dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) - d.udma_mask = ATA_UDMA5; - } - - printk(KERN_INFO "%s %s: UDMA%s controller\n", - d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); - - /* - * Determine the system bus clock. - */ - amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; - - switch (amd_clock) { - case 33000: amd_clock = 33333; break; - case 37000: amd_clock = 37500; break; - case 41000: amd_clock = 41666; break; - } - - if (amd_clock < 20000 || amd_clock > 50000) { - printk(KERN_WARNING "%s: User given PCI clock speed impossible" - " (%d), using 33 MHz instead.\n", - d.name, amd_clock); - amd_clock = 33333; - } - - return ide_pci_init_one(dev, &d, NULL); -} - -static const struct pci_device_id amd74xx_pci_tbl[] = { - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 }, -#ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 }, -#endif - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 }, -#ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 }, -#endif - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); - -static struct pci_driver amd74xx_pci_driver = { - .name = "AMD_IDE", - .id_table = amd74xx_pci_tbl, - .probe = amd74xx_probe, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init amd74xx_ide_init(void) -{ - return ide_pci_register_driver(&amd74xx_pci_driver); -} - -static void __exit amd74xx_ide_exit(void) -{ - pci_unregister_driver(&amd74xx_pci_driver); -} - -module_init(amd74xx_ide_init); -module_exit(amd74xx_ide_exit); - -MODULE_AUTHOR("Vojtech Pavlik"); -MODULE_DESCRIPTION("AMD PCI IDE driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c deleted file mode 100644 index b2735d28f5c..00000000000 --- a/drivers/ide/pci/atiixp.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) 2003 ATI Inc. <hyu@ati.com> - * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "atiixp" - -#define ATIIXP_IDE_PIO_TIMING 0x40 -#define ATIIXP_IDE_MDMA_TIMING 0x44 -#define ATIIXP_IDE_PIO_CONTROL 0x48 -#define ATIIXP_IDE_PIO_MODE 0x4a -#define ATIIXP_IDE_UDMA_CONTROL 0x54 -#define ATIIXP_IDE_UDMA_MODE 0x56 - -typedef struct { - u8 command_width; - u8 recover_width; -} atiixp_ide_timing; - -static atiixp_ide_timing pio_timing[] = { - { 0x05, 0x0d }, - { 0x04, 0x07 }, - { 0x03, 0x04 }, - { 0x02, 0x02 }, - { 0x02, 0x00 }, -}; - -static atiixp_ide_timing mdma_timing[] = { - { 0x07, 0x07 }, - { 0x02, 0x01 }, - { 0x02, 0x00 }, -}; - -static DEFINE_SPINLOCK(atiixp_lock); - -/** - * atiixp_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Set the interface PIO mode. - */ - -static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; - u32 pio_timing_data; - u16 pio_mode_data; - - spin_lock_irqsave(&atiixp_lock, flags); - - pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); - pio_mode_data &= ~(0x07 << (drive->dn * 4)); - pio_mode_data |= (pio << (drive->dn * 4)); - pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data); - - pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); - pio_timing_data &= ~(0xff << timing_shift); - pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) | - (pio_timing[pio].command_width << (timing_shift + 4)); - pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); - - spin_unlock_irqrestore(&atiixp_lock, flags); -} - -/** - * atiixp_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Set a ATIIXP host controller to the desired DMA mode. This involves - * programming the right timing data into the PCI configuration space. - */ - -static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; - u32 tmp32; - u16 tmp16; - u16 udma_ctl = 0; - - spin_lock_irqsave(&atiixp_lock, flags); - - pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl); - - if (speed >= XFER_UDMA_0) { - pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16); - tmp16 &= ~(0x07 << (drive->dn * 4)); - tmp16 |= ((speed & 0x07) << (drive->dn * 4)); - pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16); - - udma_ctl |= (1 << drive->dn); - } else if (speed >= XFER_MW_DMA_0) { - u8 i = speed & 0x03; - - pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32); - tmp32 &= ~(0xff << timing_shift); - tmp32 |= (mdma_timing[i].recover_width << timing_shift) | - (mdma_timing[i].command_width << (timing_shift + 4)); - pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32); - - udma_ctl &= ~(1 << drive->dn); - } - - pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl); - - spin_unlock_irqrestore(&atiixp_lock, flags); -} - -static u8 atiixp_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *pdev = to_pci_dev(hwif->dev); - u8 udma_mode = 0, ch = hwif->channel; - - pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); - - if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) - return ATA_CBL_PATA80; - else - return ATA_CBL_PATA40; -} - -static const struct ide_port_ops atiixp_port_ops = { - .set_pio_mode = atiixp_set_pio_mode, - .set_dma_mode = atiixp_set_dma_mode, - .cable_detect = atiixp_cable_detect, -}; - -static const struct ide_port_info atiixp_pci_info[] __devinitdata = { - { /* 0: IXP200/300/400/700 */ - .name = DRV_NAME, - .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, - .port_ops = &atiixp_port_ops, - .host_flags = IDE_HFLAG_LEGACY_IRQS, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - }, - { /* 1: IXP600 */ - .name = DRV_NAME, - .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, - .port_ops = &atiixp_port_ops, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - }, -}; - -/** - * atiixp_init_one - called when a ATIIXP is found - * @dev: the atiixp device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - */ - -static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL); -} - -static const struct pci_device_id atiixp_pci_tbl[] = { - { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 }, - { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 }, - { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 }, - { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 }, - { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); - -static struct pci_driver atiixp_pci_driver = { - .name = "ATIIXP_IDE", - .id_table = atiixp_pci_tbl, - .probe = atiixp_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init atiixp_ide_init(void) -{ - return ide_pci_register_driver(&atiixp_pci_driver); -} - -static void __exit atiixp_ide_exit(void) -{ - pci_unregister_driver(&atiixp_pci_driver); -} - -module_init(atiixp_ide_init); -module_exit(atiixp_ide_exit); - -MODULE_AUTHOR("HUI YU"); -MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c deleted file mode 100644 index e4306647d00..00000000000 --- a/drivers/ide/pci/cmd640.c +++ /dev/null @@ -1,836 +0,0 @@ -/* - * Copyright (C) 1995-1996 Linus Torvalds & authors (see below) - */ - -/* - * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov) - * mlord@pobox.com (Mark Lord) - * - * See linux/MAINTAINERS for address of current maintainer. - * - * This file provides support for the advanced features and bugs - * of IDE interfaces using the CMD Technologies 0640 IDE interface chip. - * - * These chips are basically fucked by design, and getting this driver - * to work on every motherboard design that uses this screwed chip seems - * bloody well impossible. However, we're still trying. - * - * Version 0.97 worked for everybody. - * - * User feedback is essential. Many thanks to the beta test team: - * - * A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com, - * bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz, - * chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de, - * derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de, - * flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net, - * j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net, - * kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu, - * peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com, - * s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net, - * steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com - * liug@mama.indstate.edu, and others. - * - * Version 0.01 Initial version, hacked out of ide.c, - * and #include'd rather than compiled separately. - * This will get cleaned up in a subsequent release. - * - * Version 0.02 Fixes for vlb initialization code, enable prefetch - * for versions 'B' and 'C' of chip by default, - * some code cleanup. - * - * Version 0.03 Added reset of secondary interface, - * and black list for devices which are not compatible - * with prefetch mode. Separate function for setting - * prefetch is added, possibly it will be called some - * day from ioctl processing code. - * - * Version 0.04 Now configs/compiles separate from ide.c - * - * Version 0.05 Major rewrite of interface timing code. - * Added new function cmd640_set_mode to set PIO mode - * from ioctl call. New drives added to black list. - * - * Version 0.06 More code cleanup. Prefetch is enabled only for - * detected hard drives, not included in prefetch - * black list. - * - * Version 0.07 Changed to more conservative drive tuning policy. - * Unknown drives, which report PIO < 4 are set to - * (reported_PIO - 1) if it is supported, or to PIO0. - * List of known drives extended by info provided by - * CMD at their ftp site. - * - * Version 0.08 Added autotune/noautotune support. - * - * Version 0.09 Try to be smarter about 2nd port enabling. - * Version 0.10 Be nice and don't reset 2nd port. - * Version 0.11 Try to handle more weird situations. - * - * Version 0.12 Lots of bug fixes from Laszlo Peter - * irq unmasking disabled for reliability. - * try to be even smarter about the second port. - * tidy up source code formatting. - * Version 0.13 permit irq unmasking again. - * Version 0.90 massive code cleanup, some bugs fixed. - * defaults all drives to PIO mode0, prefetch off. - * autotune is OFF by default, with compile time flag. - * prefetch can be turned OFF/ON using "hdparm -p8/-p9" - * (requires hdparm-3.1 or newer) - * Version 0.91 first release to linux-kernel list. - * Version 0.92 move initial reg dump to separate callable function - * change "readahead" to "prefetch" to avoid confusion - * Version 0.95 respect original BIOS timings unless autotuning. - * tons of code cleanup and rearrangement. - * added CONFIG_BLK_DEV_CMD640_ENHANCED option - * prevent use of unmask when prefetch is on - * Version 0.96 prevent use of io_32bit when prefetch is off - * Version 0.97 fix VLB secondary interface for sjd@slip.net - * other minor tune-ups: 0.96 was very good. - * Version 0.98 ignore PCI version when disabled by BIOS - * Version 0.99 display setup/active/recovery clocks with PIO mode - * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems - * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7" - * ("fast" is necessary for 32bit I/O in some systems) - * Version 1.02 fix bug that resulted in slow "setup times" - * (patch courtesy of Zoltan Hidvegi) - */ - -#define CMD640_PREFETCH_MASKS 1 - -/*#define CMD640_DUMP_REGS */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "cmd640" - -static int cmd640_vlb; - -/* - * CMD640 specific registers definition. - */ - -#define VID 0x00 -#define DID 0x02 -#define PCMD 0x04 -#define PCMD_ENA 0x01 -#define PSTTS 0x06 -#define REVID 0x08 -#define PROGIF 0x09 -#define SUBCL 0x0a -#define BASCL 0x0b -#define BaseA0 0x10 -#define BaseA1 0x14 -#define BaseA2 0x18 -#define BaseA3 0x1c -#define INTLINE 0x3c -#define INPINE 0x3d - -#define CFR 0x50 -#define CFR_DEVREV 0x03 -#define CFR_IDE01INTR 0x04 -#define CFR_DEVID 0x18 -#define CFR_AT_VESA_078h 0x20 -#define CFR_DSA1 0x40 -#define CFR_DSA0 0x80 - -#define CNTRL 0x51 -#define CNTRL_DIS_RA0 0x40 -#define CNTRL_DIS_RA1 0x80 -#define CNTRL_ENA_2ND 0x08 - -#define CMDTIM 0x52 -#define ARTTIM0 0x53 -#define DRWTIM0 0x54 -#define ARTTIM1 0x55 -#define DRWTIM1 0x56 -#define ARTTIM23 0x57 -#define ARTTIM23_DIS_RA2 0x04 -#define ARTTIM23_DIS_RA3 0x08 -#define DRWTIM23 0x58 -#define BRST 0x59 - -/* - * Registers and masks for easy access by drive index: - */ -static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23}; -static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3}; - -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - -static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; -static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23}; - -/* - * Current cmd640 timing values for each drive. - * The defaults for each are the slowest possible timings. - */ -static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */ -static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */ -static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */ - -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - -static DEFINE_SPINLOCK(cmd640_lock); - -/* - * Interface to access cmd640x registers - */ -static unsigned int cmd640_key; -static void (*__put_cmd640_reg)(u16 reg, u8 val); -static u8 (*__get_cmd640_reg)(u16 reg); - -/* - * This is read from the CFR reg, and is used in several places. - */ -static unsigned int cmd640_chip_version; - -/* - * The CMD640x chip does not support DWORD config write cycles, but some - * of the BIOSes use them to implement the config services. - * Therefore, we must use direct IO instead. - */ - -/* PCI method 1 access */ - -static void put_cmd640_reg_pci1(u16 reg, u8 val) -{ - outl_p((reg & 0xfc) | cmd640_key, 0xcf8); - outb_p(val, (reg & 3) | 0xcfc); -} - -static u8 get_cmd640_reg_pci1(u16 reg) -{ - outl_p((reg & 0xfc) | cmd640_key, 0xcf8); - return inb_p((reg & 3) | 0xcfc); -} - -/* PCI method 2 access (from CMD datasheet) */ - -static void put_cmd640_reg_pci2(u16 reg, u8 val) -{ - outb_p(0x10, 0xcf8); - outb_p(val, cmd640_key + reg); - outb_p(0, 0xcf8); -} - -static u8 get_cmd640_reg_pci2(u16 reg) -{ - u8 b; - - outb_p(0x10, 0xcf8); - b = inb_p(cmd640_key + reg); - outb_p(0, 0xcf8); - return b; -} - -/* VLB access */ - -static void put_cmd640_reg_vlb(u16 reg, u8 val) -{ - outb_p(reg, cmd640_key); - outb_p(val, cmd640_key + 4); -} - -static u8 get_cmd640_reg_vlb(u16 reg) -{ - outb_p(reg, cmd640_key); - return inb_p(cmd640_key + 4); -} - -static u8 get_cmd640_reg(u16 reg) -{ - unsigned long flags; - u8 b; - - spin_lock_irqsave(&cmd640_lock, flags); - b = __get_cmd640_reg(reg); - spin_unlock_irqrestore(&cmd640_lock, flags); - return b; -} - -static void put_cmd640_reg(u16 reg, u8 val) -{ - unsigned long flags; - - spin_lock_irqsave(&cmd640_lock, flags); - __put_cmd640_reg(reg, val); - spin_unlock_irqrestore(&cmd640_lock, flags); -} - -static int __init match_pci_cmd640_device(void) -{ - const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06}; - unsigned int i; - for (i = 0; i < 4; i++) { - if (get_cmd640_reg(i) != ven_dev[i]) - return 0; - } -#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT - if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) { - printk("ide: cmd640 on PCI disabled by BIOS\n"); - return 0; - } -#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */ - return 1; /* success */ -} - -/* - * Probe for CMD640x -- pci method 1 - */ -static int __init probe_for_cmd640_pci1(void) -{ - __get_cmd640_reg = get_cmd640_reg_pci1; - __put_cmd640_reg = put_cmd640_reg_pci1; - for (cmd640_key = 0x80000000; - cmd640_key <= 0x8000f800; - cmd640_key += 0x800) { - if (match_pci_cmd640_device()) - return 1; /* success */ - } - return 0; -} - -/* - * Probe for CMD640x -- pci method 2 - */ -static int __init probe_for_cmd640_pci2(void) -{ - __get_cmd640_reg = get_cmd640_reg_pci2; - __put_cmd640_reg = put_cmd640_reg_pci2; - for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) { - if (match_pci_cmd640_device()) - return 1; /* success */ - } - return 0; -} - -/* - * Probe for CMD640x -- vlb - */ -static int __init probe_for_cmd640_vlb(void) -{ - u8 b; - - __get_cmd640_reg = get_cmd640_reg_vlb; - __put_cmd640_reg = put_cmd640_reg_vlb; - cmd640_key = 0x178; - b = get_cmd640_reg(CFR); - if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) { - cmd640_key = 0x78; - b = get_cmd640_reg(CFR); - if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h)) - return 0; - } - return 1; /* success */ -} - -/* - * Returns 1 if an IDE interface/drive exists at 0x170, - * Returns 0 otherwise. - */ -static int __init secondary_port_responding(void) -{ - unsigned long flags; - - spin_lock_irqsave(&cmd640_lock, flags); - - outb_p(0x0a, 0x176); /* select drive0 */ - udelay(100); - if ((inb_p(0x176) & 0x1f) != 0x0a) { - outb_p(0x1a, 0x176); /* select drive1 */ - udelay(100); - if ((inb_p(0x176) & 0x1f) != 0x1a) { - spin_unlock_irqrestore(&cmd640_lock, flags); - return 0; /* nothing responded */ - } - } - spin_unlock_irqrestore(&cmd640_lock, flags); - return 1; /* success */ -} - -#ifdef CMD640_DUMP_REGS -/* - * Dump out all cmd640 registers. May be called from ide.c - */ -static void cmd640_dump_regs(void) -{ - unsigned int reg = cmd640_vlb ? 0x50 : 0x00; - - /* Dump current state of chip registers */ - printk("ide: cmd640 internal register dump:"); - for (; reg <= 0x59; reg++) { - if (!(reg & 0x0f)) - printk("\n%04x:", reg); - printk(" %02x", get_cmd640_reg(reg)); - } - printk("\n"); -} -#endif - -static void __set_prefetch_mode(ide_drive_t *drive, int mode) -{ - if (mode) { /* want prefetch on? */ -#if CMD640_PREFETCH_MASKS - drive->dev_flags |= IDE_DFLAG_NO_UNMASK; - drive->dev_flags &= ~IDE_DFLAG_UNMASK; -#endif - drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT; - } else { - drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK; - drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT; - drive->io_32bit = 0; - } -} - -#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED -/* - * Check whether prefetch is on for a drive, - * and initialize the unmask flags for safe operation. - */ -static void __init check_prefetch(ide_drive_t *drive, unsigned int index) -{ - u8 b = get_cmd640_reg(prefetch_regs[index]); - - __set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1); -} -#else - -/* - * Sets prefetch mode for a drive. - */ -static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode) -{ - unsigned long flags; - int reg = prefetch_regs[index]; - u8 b; - - spin_lock_irqsave(&cmd640_lock, flags); - b = __get_cmd640_reg(reg); - __set_prefetch_mode(drive, mode); - if (mode) - b &= ~prefetch_masks[index]; /* enable prefetch */ - else - b |= prefetch_masks[index]; /* disable prefetch */ - __put_cmd640_reg(reg, b); - spin_unlock_irqrestore(&cmd640_lock, flags); -} - -/* - * Dump out current drive clocks settings - */ -static void display_clocks(unsigned int index) -{ - u8 active_count, recovery_count; - - active_count = active_counts[index]; - if (active_count == 1) - ++active_count; - recovery_count = recovery_counts[index]; - if (active_count > 3 && recovery_count == 1) - ++recovery_count; - if (cmd640_chip_version > 1) - recovery_count += 1; /* cmd640b uses (count + 1)*/ - printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count); -} - -/* - * Pack active and recovery counts into single byte representation - * used by controller - */ -static inline u8 pack_nibbles(u8 upper, u8 lower) -{ - return ((upper & 0x0f) << 4) | (lower & 0x0f); -} - -/* - * This routine writes the prepared setup/active/recovery counts - * for a drive into the cmd640 chipset registers to active them. - */ -static void program_drive_counts(ide_drive_t *drive, unsigned int index) -{ - unsigned long flags; - u8 setup_count = setup_counts[index]; - u8 active_count = active_counts[index]; - u8 recovery_count = recovery_counts[index]; - - /* - * Set up address setup count and drive read/write timing registers. - * Primary interface has individual count/timing registers for - * each drive. Secondary interface has one common set of registers, - * so we merge the timings, using the slowest value for each timing. - */ - if (index > 1) { - ide_hwif_t *hwif = drive->hwif; - ide_drive_t *peer = &hwif->drives[!(drive->dn & 1)]; - unsigned int mate = index ^ 1; - - if (peer->dev_flags & IDE_DFLAG_PRESENT) { - if (setup_count < setup_counts[mate]) - setup_count = setup_counts[mate]; - if (active_count < active_counts[mate]) - active_count = active_counts[mate]; - if (recovery_count < recovery_counts[mate]) - recovery_count = recovery_counts[mate]; - } - } - - /* - * Convert setup_count to internal chipset representation - */ - switch (setup_count) { - case 4: setup_count = 0x00; break; - case 3: setup_count = 0x80; break; - case 1: - case 2: setup_count = 0x40; break; - default: setup_count = 0xc0; /* case 5 */ - } - - /* - * Now that everything is ready, program the new timings - */ - spin_lock_irqsave(&cmd640_lock, flags); - /* - * Program the address_setup clocks into ARTTIM reg, - * and then the active/recovery counts into the DRWTIM reg - * (this converts counts of 16 into counts of zero -- okay). - */ - setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f; - __put_cmd640_reg(arttim_regs[index], setup_count); - __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count)); - spin_unlock_irqrestore(&cmd640_lock, flags); -} - -/* - * Set a specific pio_mode for a drive - */ -static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, - u8 pio_mode, unsigned int cycle_time) -{ - struct ide_timing *t; - int setup_time, active_time, recovery_time, clock_time; - u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; - int bus_speed; - - if (cmd640_vlb) - bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; - else - bus_speed = ide_pci_clk ? ide_pci_clk : 33; - - if (pio_mode > 5) - pio_mode = 5; - - t = ide_timing_find_mode(XFER_PIO_0 + pio_mode); - setup_time = t->setup; - active_time = t->active; - - recovery_time = cycle_time - (setup_time + active_time); - clock_time = 1000 / bus_speed; - cycle_count = DIV_ROUND_UP(cycle_time, clock_time); - - setup_count = DIV_ROUND_UP(setup_time, clock_time); - - active_count = DIV_ROUND_UP(active_time, clock_time); - if (active_count < 2) - active_count = 2; /* minimum allowed by cmd640 */ - - recovery_count = DIV_ROUND_UP(recovery_time, clock_time); - recovery_count2 = cycle_count - (setup_count + active_count); - if (recovery_count2 > recovery_count) - recovery_count = recovery_count2; - if (recovery_count < 2) - recovery_count = 2; /* minimum allowed by cmd640 */ - if (recovery_count > 17) { - active_count += recovery_count - 17; - recovery_count = 17; - } - if (active_count > 16) - active_count = 16; /* maximum allowed by cmd640 */ - if (cmd640_chip_version > 1) - recovery_count -= 1; /* cmd640b uses (count + 1)*/ - if (recovery_count > 16) - recovery_count = 16; /* maximum allowed by cmd640 */ - - setup_counts[index] = setup_count; - active_counts[index] = active_count; - recovery_counts[index] = recovery_count; - - /* - * In a perfect world, we might set the drive pio mode here - * (using WIN_SETFEATURE) before continuing. - * - * But we do not, because: - * 1) this is the wrong place to do it (proper is do_special() in ide.c) - * 2) in practice this is rarely, if ever, necessary - */ - program_drive_counts(drive, index); -} - -static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - unsigned int index = 0, cycle_time; - u8 b; - - switch (pio) { - case 6: /* set fast-devsel off */ - case 7: /* set fast-devsel on */ - b = get_cmd640_reg(CNTRL) & ~0x27; - if (pio & 1) - b |= 0x27; - put_cmd640_reg(CNTRL, b); - printk("%s: %sabled cmd640 fast host timing (devsel)\n", - drive->name, (pio & 1) ? "en" : "dis"); - return; - case 8: /* set prefetch off */ - case 9: /* set prefetch on */ - set_prefetch_mode(drive, index, pio & 1); - printk("%s: %sabled cmd640 prefetch\n", - drive->name, (pio & 1) ? "en" : "dis"); - return; - } - - cycle_time = ide_pio_cycle_time(drive, pio); - cmd640_set_mode(drive, index, pio, cycle_time); - - printk("%s: selected cmd640 PIO mode%d (%dns)", - drive->name, pio, cycle_time); - - display_clocks(index); -} -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - -static void cmd640_init_dev(ide_drive_t *drive) -{ - unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1); - -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - /* - * Reset timing to the slowest speed and turn off prefetch. - * This way, the drive identify code has a better chance. - */ - setup_counts[i] = 4; /* max possible */ - active_counts[i] = 16; /* max possible */ - recovery_counts[i] = 16; /* max possible */ - program_drive_counts(drive, i); - set_prefetch_mode(drive, i, 0); - printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i); -#else - /* - * Set the drive unmask flags to match the prefetch setting. - */ - check_prefetch(drive, i); - printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n", - i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on"); -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ -} - - -static const struct ide_port_ops cmd640_port_ops = { - .init_dev = cmd640_init_dev, -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - .set_pio_mode = cmd640_set_pio_mode, -#endif -}; - -static int pci_conf1(void) -{ - unsigned long flags; - u32 tmp; - - spin_lock_irqsave(&cmd640_lock, flags); - outb(0x01, 0xCFB); - tmp = inl(0xCF8); - outl(0x80000000, 0xCF8); - if (inl(0xCF8) == 0x80000000) { - outl(tmp, 0xCF8); - spin_unlock_irqrestore(&cmd640_lock, flags); - return 1; - } - outl(tmp, 0xCF8); - spin_unlock_irqrestore(&cmd640_lock, flags); - return 0; -} - -static int pci_conf2(void) -{ - unsigned long flags; - - spin_lock_irqsave(&cmd640_lock, flags); - outb(0x00, 0xCFB); - outb(0x00, 0xCF8); - outb(0x00, 0xCFA); - if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) { - spin_unlock_irqrestore(&cmd640_lock, flags); - return 1; - } - spin_unlock_irqrestore(&cmd640_lock, flags); - return 0; -} - -static const struct ide_port_info cmd640_port_info __initdata = { - .chipset = ide_cmd640, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_NO_DMA | - IDE_HFLAG_ABUSE_PREFETCH | - IDE_HFLAG_ABUSE_FAST_DEVSEL, - .port_ops = &cmd640_port_ops, - .pio_mask = ATA_PIO5, -}; - -static int cmd640x_init_one(unsigned long base, unsigned long ctl) -{ - if (!request_region(base, 8, DRV_NAME)) { - printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", - DRV_NAME, base, base + 7); - return -EBUSY; - } - - if (!request_region(ctl, 1, DRV_NAME)) { - printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", - DRV_NAME, ctl); - release_region(base, 8); - return -EBUSY; - } - - return 0; -} - -/* - * Probe for a cmd640 chipset, and initialize it if found. - */ -static int __init cmd640x_init(void) -{ - int second_port_cmd640 = 0, rc; - const char *bus_type, *port2; - u8 b, cfr; - hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL }; - - if (cmd640_vlb && probe_for_cmd640_vlb()) { - bus_type = "VLB"; - } else { - cmd640_vlb = 0; - /* Find out what kind of PCI probing is supported otherwise - Justin Gibbs will sulk.. */ - if (pci_conf1() && probe_for_cmd640_pci1()) - bus_type = "PCI (type1)"; - else if (pci_conf2() && probe_for_cmd640_pci2()) - bus_type = "PCI (type2)"; - else - return 0; - } - /* - * Undocumented magic (there is no 0x5b reg in specs) - */ - put_cmd640_reg(0x5b, 0xbd); - if (get_cmd640_reg(0x5b) != 0xbd) { - printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n"); - return 0; - } - put_cmd640_reg(0x5b, 0); - -#ifdef CMD640_DUMP_REGS - cmd640_dump_regs(); -#endif - - /* - * Documented magic begins here - */ - cfr = get_cmd640_reg(CFR); - cmd640_chip_version = cfr & CFR_DEVREV; - if (cmd640_chip_version == 0) { - printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version); - return 0; - } - - rc = cmd640x_init_one(0x1f0, 0x3f6); - if (rc) - return rc; - - rc = cmd640x_init_one(0x170, 0x376); - if (rc) { - release_region(0x3f6, 1); - release_region(0x1f0, 8); - return rc; - } - - memset(&hw, 0, sizeof(hw)); - - ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); - hw[0].irq = 14; - hw[0].chipset = ide_cmd640; - - ide_std_init_ports(&hw[1], 0x170, 0x376); - hw[1].irq = 15; - hw[1].chipset = ide_cmd640; - - printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" - "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); - - /* - * Initialize data for primary port - */ - hws[0] = &hw[0]; - - /* - * Ensure compatibility by always using the slowest timings - * for access to the drive's command register block, - * and reset the prefetch burstsize to default (512 bytes). - * - * Maybe we need a way to NOT do these on *some* systems? - */ - put_cmd640_reg(CMDTIM, 0); - put_cmd640_reg(BRST, 0x40); - - b = get_cmd640_reg(CNTRL); - - /* - * Try to enable the secondary interface, if not already enabled - */ - if (secondary_port_responding()) { - if ((b & CNTRL_ENA_2ND)) { - second_port_cmd640 = 1; - port2 = "okay"; - } else if (cmd640_vlb) { - second_port_cmd640 = 1; - port2 = "alive"; - } else - port2 = "not cmd640"; - } else { - put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ - if (secondary_port_responding()) { - second_port_cmd640 = 1; - port2 = "enabled"; - } else { - put_cmd640_reg(CNTRL, b); /* restore original setting */ - port2 = "not responding"; - } - } - - /* - * Initialize data for secondary cmd640 port, if enabled - */ - if (second_port_cmd640) - hws[1] = &hw[1]; - - printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", - second_port_cmd640 ? "" : "not ", port2); - -#ifdef CMD640_DUMP_REGS - cmd640_dump_regs(); -#endif - - return ide_host_add(&cmd640_port_info, hws, NULL); -} - -module_param_named(probe_vlb, cmd640_vlb, bool, 0); -MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset"); - -module_init(cmd640x_init); - -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c deleted file mode 100644 index 935385c77e0..00000000000 --- a/drivers/ide/pci/cmd64x.c +++ /dev/null @@ -1,532 +0,0 @@ -/* - * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. - * Due to massive hardware bugs, UltraDMA is only supported - * on the 646U2 and not on the 646U. - * - * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 1998 David S. Miller (davem@redhat.com) - * - * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "cmd64x" - -#define CMD_DEBUG 0 - -#if CMD_DEBUG -#define cmdprintk(x...) printk(x) -#else -#define cmdprintk(x...) -#endif - -/* - * CMD64x specific registers definition. - */ -#define CFR 0x50 -#define CFR_INTR_CH0 0x04 - -#define CMDTIM 0x52 -#define ARTTIM0 0x53 -#define DRWTIM0 0x54 -#define ARTTIM1 0x55 -#define DRWTIM1 0x56 -#define ARTTIM23 0x57 -#define ARTTIM23_DIS_RA2 0x04 -#define ARTTIM23_DIS_RA3 0x08 -#define ARTTIM23_INTR_CH1 0x10 -#define DRWTIM2 0x58 -#define BRST 0x59 -#define DRWTIM3 0x5b - -#define BMIDECR0 0x70 -#define MRDMODE 0x71 -#define MRDMODE_INTR_CH0 0x04 -#define MRDMODE_INTR_CH1 0x08 -#define UDIDETCR0 0x73 -#define DTPR0 0x74 -#define BMIDECR1 0x78 -#define BMIDECSR 0x79 -#define UDIDETCR1 0x7B -#define DTPR1 0x7C - -static u8 quantize_timing(int timing, int quant) -{ - return (timing + quant - 1) / quant; -} - -/* - * This routine calculates active/recovery counts and then writes them into - * the chipset registers. - */ -static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); - u8 cycle_count, active_count, recovery_count, drwtim; - static const u8 recovery_values[] = - {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; - static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; - - cmdprintk("program_cycle_times parameters: total=%d, active=%d\n", - cycle_time, active_time); - - cycle_count = quantize_timing( cycle_time, clock_time); - active_count = quantize_timing(active_time, clock_time); - recovery_count = cycle_count - active_count; - - /* - * In case we've got too long recovery phase, try to lengthen - * the active phase - */ - if (recovery_count > 16) { - active_count += recovery_count - 16; - recovery_count = 16; - } - if (active_count > 16) /* shouldn't actually happen... */ - active_count = 16; - - cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n", - cycle_count, active_count, recovery_count); - - /* - * Convert values to internal chipset representation - */ - recovery_count = recovery_values[recovery_count]; - active_count &= 0x0f; - - /* Program the active/recovery counts into the DRWTIM register */ - drwtim = (active_count << 4) | recovery_count; - (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); - cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]); -} - -/* - * This routine writes into the chipset registers - * PIO setup/active/recovery timings. - */ -static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - unsigned int cycle_time; - u8 setup_count, arttim = 0; - - static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; - static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; - - cycle_time = ide_pio_cycle_time(drive, pio); - - program_cycle_times(drive, cycle_time, t->active); - - setup_count = quantize_timing(t->setup, - 1000 / (ide_pci_clk ? ide_pci_clk : 33)); - - /* - * The primary channel has individual address setup timing registers - * for each drive and the hardware selects the slowest timing itself. - * The secondary channel has one common register and we have to select - * the slowest address setup timing ourselves. - */ - if (hwif->channel) { - ide_drive_t *drives = hwif->drives; - - drive->drive_data = setup_count; - setup_count = max(drives[0].drive_data, drives[1].drive_data); - } - - if (setup_count > 5) /* shouldn't actually happen... */ - setup_count = 5; - cmdprintk("Final address setup count: %d\n", setup_count); - - /* - * Program the address setup clocks into the ARTTIM registers. - * Avoid clearing the secondary channel's interrupt bit. - */ - (void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim); - if (hwif->channel) - arttim &= ~ARTTIM23_INTR_CH1; - arttim &= ~0xc0; - arttim |= setup_values[setup_count]; - (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); - cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]); -} - -/* - * Attempts to set drive's PIO mode. - * Special cases are 8: prefetch off, 9: prefetch on (both never worked) - */ - -static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - /* - * Filter out the prefetch control values - * to prevent PIO5 from being programmed - */ - if (pio == 8 || pio == 9) - return; - - cmd64x_tune_pio(drive, pio); -} - -static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 unit = drive->dn & 0x01; - u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; - - if (speed >= XFER_SW_DMA_0) { - (void) pci_read_config_byte(dev, pciU, ®U); - regU &= ~(unit ? 0xCA : 0x35); - } - - switch(speed) { - case XFER_UDMA_5: - regU |= unit ? 0x0A : 0x05; - break; - case XFER_UDMA_4: - regU |= unit ? 0x4A : 0x15; - break; - case XFER_UDMA_3: - regU |= unit ? 0x8A : 0x25; - break; - case XFER_UDMA_2: - regU |= unit ? 0x42 : 0x11; - break; - case XFER_UDMA_1: - regU |= unit ? 0x82 : 0x21; - break; - case XFER_UDMA_0: - regU |= unit ? 0xC2 : 0x31; - break; - case XFER_MW_DMA_2: - program_cycle_times(drive, 120, 70); - break; - case XFER_MW_DMA_1: - program_cycle_times(drive, 150, 80); - break; - case XFER_MW_DMA_0: - program_cycle_times(drive, 480, 215); - break; - } - - if (speed >= XFER_SW_DMA_0) - (void) pci_write_config_byte(dev, pciU, regU); -} - -static int cmd648_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long base = hwif->dma_base - (hwif->channel * 8); - int err = ide_dma_end(drive); - u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : - MRDMODE_INTR_CH0; - u8 mrdmode = inb(base + 1); - - /* clear the interrupt bit */ - outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask, - base + 1); - - return err; -} - -static int cmd64x_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - int irq_reg = hwif->channel ? ARTTIM23 : CFR; - u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : - CFR_INTR_CH0; - u8 irq_stat = 0; - int err = ide_dma_end(drive); - - (void) pci_read_config_byte(dev, irq_reg, &irq_stat); - /* clear the interrupt bit */ - (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask); - - return err; -} - -static int cmd648_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long base = hwif->dma_base - (hwif->channel * 8); - u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : - MRDMODE_INTR_CH0; - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - u8 mrdmode = inb(base + 1); - -#ifdef DEBUG - printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n", - drive->name, dma_stat, mrdmode, irq_mask); -#endif - if (!(mrdmode & irq_mask)) - return 0; - - /* return 1 if INTR asserted */ - if (dma_stat & 4) - return 1; - - return 0; -} - -static int cmd64x_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - int irq_reg = hwif->channel ? ARTTIM23 : CFR; - u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : - CFR_INTR_CH0; - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - u8 irq_stat = 0; - - (void) pci_read_config_byte(dev, irq_reg, &irq_stat); - -#ifdef DEBUG - printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n", - drive->name, dma_stat, irq_stat, irq_mask); -#endif - if (!(irq_stat & irq_mask)) - return 0; - - /* return 1 if INTR asserted */ - if (dma_stat & 4) - return 1; - - return 0; -} - -/* - * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old - * event order for DMA transfers. - */ - -static int cmd646_1_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 dma_stat = 0, dma_cmd = 0; - - drive->waiting_for_dma = 0; - /* get DMA status */ - dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - /* read DMA command state */ - dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - /* stop DMA */ - outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); - /* clear the INTR & ERROR bits */ - outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS); - /* and free any DMA resources */ - ide_destroy_dmatable(drive); - /* verify good DMA status */ - return (dma_stat & 7) != 4; -} - -static unsigned int init_chipset_cmd64x(struct pci_dev *dev) -{ - u8 mrdmode = 0; - - /* Set a good latency timer and cache line size value. */ - (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); - /* FIXME: pci_set_master() to ensure a good latency timer value */ - - /* - * Enable interrupts, select MEMORY READ LINE for reads. - * - * NOTE: although not mentioned in the PCI0646U specs, - * bits 0-1 are write only and won't be read back as - * set or not -- PCI0646U2 specs clarify this point. - */ - (void) pci_read_config_byte (dev, MRDMODE, &mrdmode); - mrdmode &= ~0x30; - (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02)); - - return 0; -} - -static u8 cmd64x_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01; - - switch (dev->device) { - case PCI_DEVICE_ID_CMD_648: - case PCI_DEVICE_ID_CMD_649: - pci_read_config_byte(dev, BMIDECSR, &bmidecsr); - return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - default: - return ATA_CBL_PATA40; - } -} - -static const struct ide_port_ops cmd64x_port_ops = { - .set_pio_mode = cmd64x_set_pio_mode, - .set_dma_mode = cmd64x_set_dma_mode, - .cable_detect = cmd64x_cable_detect, -}; - -static const struct ide_dma_ops cmd64x_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = cmd64x_dma_end, - .dma_test_irq = cmd64x_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_dma_ops cmd646_rev1_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = cmd646_1_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_dma_ops cmd648_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = cmd648_dma_end, - .dma_test_irq = cmd648_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { - { /* 0: CMD643 */ - .name = DRV_NAME, - .init_chipset = init_chipset_cmd64x, - .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, - .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd64x_dma_ops, - .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | - IDE_HFLAG_ABUSE_PREFETCH, - .pio_mask = ATA_PIO5, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = 0x00, /* no udma */ - }, - { /* 1: CMD646 */ - .name = DRV_NAME, - .init_chipset = init_chipset_cmd64x, - .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .chipset = ide_cmd646, - .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd648_dma_ops, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH, - .pio_mask = ATA_PIO5, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, - }, - { /* 2: CMD648 */ - .name = DRV_NAME, - .init_chipset = init_chipset_cmd64x, - .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd648_dma_ops, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH, - .pio_mask = ATA_PIO5, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA4, - }, - { /* 3: CMD649 */ - .name = DRV_NAME, - .init_chipset = init_chipset_cmd64x, - .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd648_dma_ops, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH, - .pio_mask = ATA_PIO5, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - } -}; - -static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_port_info d; - u8 idx = id->driver_data; - - d = cmd64x_chipsets[idx]; - - if (idx == 1) { - /* - * UltraDMA only supported on PCI646U and PCI646U2, which - * correspond to revisions 0x03, 0x05 and 0x07 respectively. - * Actually, although the CMD tech support people won't - * tell me the details, the 0x03 revision cannot support - * UDMA correctly without hardware modifications, and even - * then it only works with Quantum disks due to some - * hold time assumptions in the 646U part which are fixed - * in the 646U2. - * - * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. - */ - if (dev->revision < 5) { - d.udma_mask = 0x00; - /* - * The original PCI0646 didn't have the primary - * channel enable bit, it appeared starting with - * PCI0646U (i.e. revision ID 3). - */ - if (dev->revision < 3) { - d.enablebits[0].reg = 0; - if (dev->revision == 1) - d.dma_ops = &cmd646_rev1_dma_ops; - else - d.dma_ops = &cmd64x_dma_ops; - } - } - } - - return ide_pci_init_one(dev, &d, NULL); -} - -static const struct pci_device_id cmd64x_pci_tbl[] = { - { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 }, - { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 }, - { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 }, - { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl); - -static struct pci_driver cmd64x_pci_driver = { - .name = "CMD64x_IDE", - .id_table = cmd64x_pci_tbl, - .probe = cmd64x_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init cmd64x_ide_init(void) -{ - return ide_pci_register_driver(&cmd64x_pci_driver); -} - -static void __exit cmd64x_ide_exit(void) -{ - pci_unregister_driver(&cmd64x_pci_driver); -} - -module_init(cmd64x_ide_init); -module_exit(cmd64x_ide_exit); - -MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c deleted file mode 100644 index 5efb467f8fa..00000000000 --- a/drivers/ide/pci/cs5520.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * IDE tuning and bus mastering support for the CS5510/CS5520 - * chipsets - * - * The CS5510/CS5520 are slightly unusual devices. Unlike the - * typical IDE controllers they do bus mastering with the drive in - * PIO mode and smarter silicon. - * - * The practical upshot of this is that we must always tune the - * drive for the right PIO mode. We must also ignore all the blacklists - * and the drive bus mastering DMA information. - * - * *** This driver is strictly experimental *** - * - * (c) Copyright Red Hat Inc 2002 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * For the avoidance of doubt the "preferred form" of this code is one which - * is in an open non patent encumbered format. Where cryptographic key signing - * forms part of the process of creating an executable the information - * including keys needed to generate an equivalently functional executable - * are deemed to be part of the source code. - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/dma-mapping.h> - -#define DRV_NAME "cs5520" - -struct pio_clocks -{ - int address; - int assert; - int recovery; -}; - -static struct pio_clocks cs5520_pio_clocks[]={ - {3, 6, 11}, - {2, 5, 6}, - {1, 4, 3}, - {1, 3, 2}, - {1, 2, 1} -}; - -static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *pdev = to_pci_dev(hwif->dev); - int controller = drive->dn > 1 ? 1 : 0; - - /* 8bit CAT/CRT - 8bit command timing for channel */ - pci_write_config_byte(pdev, 0x62 + controller, - (cs5520_pio_clocks[pio].recovery << 4) | - (cs5520_pio_clocks[pio].assert)); - - /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */ - - /* FIXME: should these use address ? */ - /* Data read timing */ - pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1), - (cs5520_pio_clocks[pio].recovery << 4) | - (cs5520_pio_clocks[pio].assert)); - /* Write command timing */ - pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1), - (cs5520_pio_clocks[pio].recovery << 4) | - (cs5520_pio_clocks[pio].assert)); -} - -static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - printk(KERN_ERR "cs55x0: bad ide timing.\n"); - - cs5520_set_pio_mode(drive, 0); -} - -static const struct ide_port_ops cs5520_port_ops = { - .set_pio_mode = cs5520_set_pio_mode, - .set_dma_mode = cs5520_set_dma_mode, -}; - -static const struct ide_port_info cyrix_chipset __devinitdata = { - .name = DRV_NAME, - .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } }, - .port_ops = &cs5520_port_ops, - .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520, - .pio_mask = ATA_PIO4, -}; - -/* - * The 5510/5520 are a bit weird. They don't quite set up the way - * the PCI helper layer expects so we must do much of the set up - * work longhand. - */ - -static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct ide_port_info *d = &cyrix_chipset; - hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; - - ide_setup_pci_noise(dev, d); - - /* We must not grab the entire device, it has 'ISA' space in its - * BARS too and we will freak out other bits of the kernel - */ - if (pci_enable_device_io(dev)) { - printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); - return -ENODEV; - } - pci_set_master(dev); - if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { - printk(KERN_WARNING "%s: No suitable DMA available.\n", - d->name); - return -ENODEV; - } - - /* - * Now the chipset is configured we can let the core - * do all the device setup for us - */ - - ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]); - - return ide_host_add(d, hws, NULL); -} - -static const struct pci_device_id cs5520_pci_tbl[] = { - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 }, - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl); - -static struct pci_driver cs5520_pci_driver = { - .name = "Cyrix_IDE", - .id_table = cs5520_pci_tbl, - .probe = cs5520_init_one, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init cs5520_ide_init(void) -{ - return ide_pci_register_driver(&cs5520_pci_driver); -} - -module_init(cs5520_ide_init); - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c deleted file mode 100644 index 53f079cc00a..00000000000 --- a/drivers/ide/pci/cs5530.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2000 Mark Lord <mlord@pobox.com> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * - * May be copied or modified under the terms of the GNU General Public License - * - * Development of this chipset driver was funded - * by the nice folks at National Semiconductor. - * - * Documentation: - * CS5530 documentation available from National Semiconductor. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> - -#define DRV_NAME "cs5530" - -/* - * Here are the standard PIO mode 0-4 timings for each "format". - * Format-0 uses fast data reg timings, with slower command reg timings. - * Format-1 uses fast timings for all registers, but won't work with all drives. - */ -static unsigned int cs5530_pio_timings[2][5] = { - {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, - {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} -}; - -/* - * After chip reset, the PIO timings are set to 0x0000e132, which is not valid. - */ -#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132) -#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20)) - -/** - * cs5530_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Handles setting of PIO mode for the chipset. - * - * The init_hwif_cs5530() routine guarantees that all drives - * will have valid default PIO timings set up before we get here. - */ - -static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - unsigned long basereg = CS5530_BASEREG(drive->hwif); - unsigned int format = (inl(basereg + 4) >> 31) & 1; - - outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); -} - -/** - * cs5530_udma_filter - UDMA filter - * @drive: drive - * - * cs5530_udma_filter() does UDMA mask filtering for the given drive - * taking into the consideration capabilities of the mate device. - * - * The CS5530 specifies that two drives sharing a cable cannot mix - * UDMA/MDMA. It has to be one or the other, for the pair, though - * different timings can still be chosen for each drive. We could - * set the appropriate timing bits on the fly, but that might be - * a bit confusing. So, for now we statically handle this requirement - * by looking at our mate drive to see what it is capable of, before - * choosing a mode for our own drive. - * - * Note: This relies on the fact we never fail from UDMA to MWDMA2 - * but instead drop to PIO. - */ - -static u8 cs5530_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; - u8 mask = hwif->ultra_mask; - - if (mate == NULL) - goto out; - - if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { - if ((mateid[ATA_ID_FIELD_VALID] & 4) && - (mateid[ATA_ID_UDMA_MODES] & 7)) - goto out; - if ((mateid[ATA_ID_FIELD_VALID] & 2) && - (mateid[ATA_ID_MWDMA_MODES] & 7)) - mask = 0; - } -out: - return mask; -} - -static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ - unsigned long basereg; - unsigned int reg, timings = 0; - - switch (mode) { - case XFER_UDMA_0: timings = 0x00921250; break; - case XFER_UDMA_1: timings = 0x00911140; break; - case XFER_UDMA_2: timings = 0x00911030; break; - case XFER_MW_DMA_0: timings = 0x00077771; break; - case XFER_MW_DMA_1: timings = 0x00012121; break; - case XFER_MW_DMA_2: timings = 0x00002020; break; - } - basereg = CS5530_BASEREG(drive->hwif); - reg = inl(basereg + 4); /* get drive0 config register */ - timings |= reg & 0x80000000; /* preserve PIO format bit */ - if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ - outl(timings, basereg + 4); /* write drive0 config register */ - } else { - if (timings & 0x00100000) - reg |= 0x00100000; /* enable UDMA timings for both drives */ - else - reg &= ~0x00100000; /* disable UDMA timings for both drives */ - outl(reg, basereg + 4); /* write drive0 config register */ - outl(timings, basereg + 12); /* write drive1 config register */ - } -} - -/** - * init_chipset_5530 - set up 5530 bridge - * @dev: PCI device - * - * Initialize the cs5530 bridge for reliable IDE DMA operation. - */ - -static unsigned int init_chipset_cs5530(struct pci_dev *dev) -{ - struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; - - if (pci_resource_start(dev, 4) == 0) - return -EFAULT; - - dev = NULL; - while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { - switch (dev->device) { - case PCI_DEVICE_ID_CYRIX_PCI_MASTER: - master_0 = pci_dev_get(dev); - break; - case PCI_DEVICE_ID_CYRIX_5530_LEGACY: - cs5530_0 = pci_dev_get(dev); - break; - } - } - if (!master_0) { - printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); - goto out; - } - if (!cs5530_0) { - printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); - goto out; - } - - /* - * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530: - * --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530 - */ - - pci_set_master(cs5530_0); - pci_try_set_mwi(cs5530_0); - - /* - * Set PCI CacheLineSize to 16-bytes: - * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 - */ - - pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); - - /* - * Disable trapping of UDMA register accesses (Win98 hack): - * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 - */ - - pci_write_config_word(cs5530_0, 0xd0, 0x5006); - - /* - * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: - * The other settings are what is necessary to get the register - * into a sane state for IDE DMA operation. - */ - - pci_write_config_byte(master_0, 0x40, 0x1e); - - /* - * Set max PCI burst size (16-bytes seems to work best): - * 16bytes: set bit-1 at 0x41 (reg value of 0x16) - * all others: clear bit-1 at 0x41, and do: - * 128bytes: OR 0x00 at 0x41 - * 256bytes: OR 0x04 at 0x41 - * 512bytes: OR 0x08 at 0x41 - * 1024bytes: OR 0x0c at 0x41 - */ - - pci_write_config_byte(master_0, 0x41, 0x14); - - /* - * These settings are necessary to get the chip - * into a sane state for IDE DMA operation. - */ - - pci_write_config_byte(master_0, 0x42, 0x00); - pci_write_config_byte(master_0, 0x43, 0xc1); - -out: - pci_dev_put(master_0); - pci_dev_put(cs5530_0); - return 0; -} - -/** - * init_hwif_cs5530 - initialise an IDE channel - * @hwif: IDE to initialize - * - * This gets invoked by the IDE driver once for each channel. It - * performs channel-specific pre-initialization before drive probing. - */ - -static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) -{ - unsigned long basereg; - u32 d0_timings; - - basereg = CS5530_BASEREG(hwif); - d0_timings = inl(basereg + 0); - if (CS5530_BAD_PIO(d0_timings)) - outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0); - if (CS5530_BAD_PIO(inl(basereg + 8))) - outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8); -} - -static const struct ide_port_ops cs5530_port_ops = { - .set_pio_mode = cs5530_set_pio_mode, - .set_dma_mode = cs5530_set_dma_mode, - .udma_filter = cs5530_udma_filter, -}; - -static const struct ide_port_info cs5530_chipset __devinitdata = { - .name = DRV_NAME, - .init_chipset = init_chipset_cs5530, - .init_hwif = init_hwif_cs5530, - .port_ops = &cs5530_port_ops, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_POST_SET_MODE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, -}; - -static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &cs5530_chipset, NULL); -} - -static const struct pci_device_id cs5530_pci_tbl[] = { - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl); - -static struct pci_driver cs5530_pci_driver = { - .name = "CS5530 IDE", - .id_table = cs5530_pci_tbl, - .probe = cs5530_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init cs5530_ide_init(void) -{ - return ide_pci_register_driver(&cs5530_pci_driver); -} - -static void __exit cs5530_ide_exit(void) -{ - pci_unregister_driver(&cs5530_pci_driver); -} - -module_init(cs5530_ide_init); -module_exit(cs5530_ide_exit); - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c deleted file mode 100644 index 983d957a018..00000000000 --- a/drivers/ide/pci/cs5535.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright (C) 2004-2005 Advanced Micro Devices, Inc. - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * - * History: - * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com> - * - Reworked tuneproc, set_drive, misc mods to prep for mainline - * - Work was sponsored by CIS (M) Sdn Bhd. - * Ported to Kernel 2.6.11 on June 26, 2005 by - * Wolfgang Zuleger <wolfgang.zuleger@gmx.de> - * Alexander Kiausch <alex.kiausch@t-online.de> - * Originally developed by AMD for 2.4/2.6 - * - * Development of this chipset driver was funded - * by the nice folks at National Semiconductor/AMD. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * Documentation: - * CS5535 documentation available from AMD - */ - -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/ide.h> - -#define DRV_NAME "cs5535" - -#define MSR_ATAC_BASE 0x51300000 -#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) -#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) -#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) -#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) -#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) -#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) -#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) -#define ATAC_RESET (MSR_ATAC_BASE+0x10) -#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) -#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) -#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) -#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) -#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) -#define ATAC_BM0_CMD_PRIM 0x00 -#define ATAC_BM0_STS_PRIM 0x02 -#define ATAC_BM0_PRD 0x04 -#define CS5535_CABLE_DETECT 0x48 - -/* Format I PIO settings. We separate out cmd and data for safer timings */ - -static unsigned int cs5535_pio_cmd_timings[5] = -{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 }; -static unsigned int cs5535_pio_dta_timings[5] = -{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 }; - -static unsigned int cs5535_mwdma_timings[3] = -{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 }; - -static unsigned int cs5535_udma_timings[5] = -{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 }; - -/* Macros to check if the register is the reset value - reset value is an - invalid timing and indicates the register has not been set previously */ - -#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 ) -#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 ) - -/**** - * cs5535_set_speed - Configure the chipset to the new speed - * @drive: Drive to set up - * @speed: desired speed - * - * cs5535_set_speed() configures the chipset to a new speed. - */ -static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) -{ - u32 reg = 0, dummy; - u8 unit = drive->dn & 1; - - /* Set the PIO timings */ - if (speed < XFER_SW_DMA_0) { - ide_drive_t *pair = ide_get_pair_dev(drive); - u8 cmd, pioa; - - cmd = pioa = speed - XFER_PIO_0; - - if (pair) { - u8 piob = ide_get_best_pio_mode(pair, 255, 4); - - if (piob < cmd) - cmd = piob; - } - - /* Write the speed of the current drive */ - reg = (cs5535_pio_cmd_timings[cmd] << 16) | - cs5535_pio_dta_timings[pioa]; - wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0); - - /* And if nessesary - change the speed of the other drive */ - rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy); - - if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) != - cs5535_pio_cmd_timings[cmd]) { - reg &= 0x0000FFFF; - reg |= cs5535_pio_cmd_timings[cmd] << 16; - wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0); - } - - /* Set bit 31 of the DMA register for PIO format 1 timings */ - rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); - wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, - reg | 0x80000000UL, 0); - } else { - rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); - - reg &= 0x80000000UL; /* Preserve the PIO format bit */ - - if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4) - reg |= cs5535_udma_timings[speed - XFER_UDMA_0]; - else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) - reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0]; - else - return; - - wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0); - } -} - -/** - * cs5535_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Programs the chipset for DMA mode. - */ - -static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - cs5535_set_speed(drive, speed); -} - -/** - * cs5535_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * A callback from the upper layers for PIO-only tuning. - */ - -static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - cs5535_set_speed(drive, XFER_PIO_0 + pio); -} - -static u8 cs5535_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 bit; - - /* if a 80 wire cable was detected */ - pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit); - - return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; -} - -static const struct ide_port_ops cs5535_port_ops = { - .set_pio_mode = cs5535_set_pio_mode, - .set_dma_mode = cs5535_set_dma_mode, - .cable_detect = cs5535_cable_detect, -}; - -static const struct ide_port_info cs5535_chipset __devinitdata = { - .name = DRV_NAME, - .port_ops = &cs5535_port_ops, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA4, -}; - -static int __devinit cs5535_init_one(struct pci_dev *dev, - const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &cs5535_chipset, NULL); -} - -static const struct pci_device_id cs5535_pci_tbl[] = { - { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 }, - { 0, }, -}; - -MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl); - -static struct pci_driver cs5535_pci_driver = { - .name = "CS5535_IDE", - .id_table = cs5535_pci_tbl, - .probe = cs5535_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init cs5535_ide_init(void) -{ - return ide_pci_register_driver(&cs5535_pci_driver); -} - -static void __exit cs5535_ide_exit(void) -{ - pci_unregister_driver(&cs5535_pci_driver); -} - -module_init(cs5535_ide_init); -module_exit(cs5535_ide_exit); - -MODULE_AUTHOR("AMD"); -MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c deleted file mode 100644 index 5297f07d293..00000000000 --- a/drivers/ide/pci/cy82c693.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer - * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator - * - * CYPRESS CY82C693 chipset IDE controller - * - * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. - * Writing the driver was quite simple, since most of the job is - * done by the generic pci-ide support. - * The hard part was finding the CY82C693's datasheet on Cypress's - * web page :-(. But Altavista solved this problem :-). - * - * - * Notes: - * - I recently got a 16.8G IBM DTTA, so I was able to test it with - * a large and fast disk - the results look great, so I'd say the - * driver is working fine :-) - * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA - * - this is my first linux driver, so there's probably a lot of room - * for optimizations and bug fixing, so feel free to do it. - * - if using PIO mode it's a good idea to set the PIO mode and - * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda - * - I had some problems with my IBM DHEA with PIO modes < 2 - * (lost interrupts) ????? - * - first tests with DMA look okay, they seem to work, but there is a - * problem with sound - the BusMaster IDE TimeOut should fixed this - * - * Ancient History: - * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693 - * ASK@1999-01-23: v0.33 made a few minor code clean ups - * removed DMA clock speed setting by default - * added boot message - * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut - * added support to set DMA Controller Clock Speed - * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes - * on some drives. - * ASK@1998-10-29: v0.3 added support to set DMA modes - * ASK@1998-10-28: v0.2 added support to set PIO modes - * ASK@1998-10-27: v0.1 first version - chipset detection - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "cy82c693" - -/* - * The following are used to debug the driver. - */ -#define CY82C693_DEBUG_INFO 0 - -/* - * NOTE: the value for busmaster timeout is tricky and I got it by - * trial and error! By using a to low value will cause DMA timeouts - * and drop IDE performance, and by using a to high value will cause - * audio playback to scatter. - * If you know a better value or how to calc it, please let me know. - */ - -/* twice the value written in cy82c693ub datasheet */ -#define BUSMASTER_TIMEOUT 0x50 -/* - * the value above was tested on my machine and it seems to work okay - */ - -/* here are the offset definitions for the registers */ -#define CY82_IDE_CMDREG 0x04 -#define CY82_IDE_ADDRSETUP 0x48 -#define CY82_IDE_MASTER_IOR 0x4C -#define CY82_IDE_MASTER_IOW 0x4D -#define CY82_IDE_SLAVE_IOR 0x4E -#define CY82_IDE_SLAVE_IOW 0x4F -#define CY82_IDE_MASTER_8BIT 0x50 -#define CY82_IDE_SLAVE_8BIT 0x51 - -#define CY82_INDEX_PORT 0x22 -#define CY82_DATA_PORT 0x23 - -#define CY82_INDEX_CHANNEL0 0x30 -#define CY82_INDEX_CHANNEL1 0x31 -#define CY82_INDEX_TIMEOUT 0x32 - -/* the min and max PCI bus speed in MHz - from datasheet */ -#define CY82C963_MIN_BUS_SPEED 25 -#define CY82C963_MAX_BUS_SPEED 33 - -/* the struct for the PIO mode timings */ -typedef struct pio_clocks_s { - u8 address_time; /* Address setup (clocks) */ - u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */ - u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */ - u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */ -} pio_clocks_t; - -/* - * calc clocks using bus_speed - * returns (rounded up) time in bus clocks for time in ns - */ -static int calc_clk(int time, int bus_speed) -{ - int clocks; - - clocks = (time*bus_speed+999)/1000 - 1; - - if (clocks < 0) - clocks = 0; - - if (clocks > 0x0F) - clocks = 0x0F; - - return clocks; -} - -/* - * compute the values for the clock registers for PIO - * mode and pci_clk [MHz] speed - * - * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used - * for mode 3 and 4 drives 8 and 16-bit timings are the same - * - */ -static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) -{ - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - int clk1, clk2; - int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - - /* we don't check against CY82C693's min and max speed, - * so you can play with the idebus=xx parameter - */ - - /* let's calc the address setup time clocks */ - p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed); - - /* let's calc the active and recovery time clocks */ - clk1 = calc_clk(t->active, bus_speed); - - /* calc recovery timing */ - clk2 = t->cycle - t->active - t->setup; - - clk2 = calc_clk(clk2, bus_speed); - - clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ - - /* note: we use the same values for 16bit IOR and IOW - * those are all the same, since I don't have other - * timings than those from ide-lib.c - */ - - p_pclk->time_16r = (u8)clk1; - p_pclk->time_16w = (u8)clk1; - - /* what are good values for 8bit ?? */ - p_pclk->time_8 = (u8)clk1; -} - -/* - * set DMA mode a specific channel for CY82C693 - */ - -static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - u8 single = (mode & 0x10) >> 4, index = 0, data = 0; - - index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; - - data = (mode & 3) | (single << 2); - - outb(index, CY82_INDEX_PORT); - outb(data, CY82_DATA_PORT); - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", - drive->name, hwif->channel, drive->dn & 1, mode & 3, single); -#endif /* CY82C693_DEBUG_INFO */ - - /* - * note: below we set the value for Bus Master IDE TimeOut Register - * I'm not absolutly sure what this does, but it solved my problem - * with IDE DMA and sound, so I now can play sound and work with - * my IDE driver at the same time :-) - * - * If you know the correct (best) value for this register please - * let me know - ASK - */ - - data = BUSMASTER_TIMEOUT; - outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); - outb(data, CY82_DATA_PORT); - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", - drive->name, data); -#endif /* CY82C693_DEBUG_INFO */ -} - -static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - pio_clocks_t pclk; - unsigned int addrCtrl; - - /* select primary or secondary channel */ - if (hwif->index > 0) { /* drive is on the secondary channel */ - dev = pci_get_slot(dev->bus, dev->devfn+1); - if (!dev) { - printk(KERN_ERR "%s: tune_drive: " - "Cannot find secondary interface!\n", - drive->name); - return; - } - } - - /* let's calc the values for this PIO mode */ - compute_clocks(pio, &pclk); - - /* now let's write the clocks registers */ - if ((drive->dn & 1) == 0) { - /* - * set master drive - * address setup control register - * is 32 bit !!! - */ - pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); - - addrCtrl &= (~0xF); - addrCtrl |= (unsigned int)pclk.address_time; - pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); - - /* now let's set the remaining registers */ - pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); - pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); - pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); - - addrCtrl &= 0xF; - } else { - /* - * set slave drive - * address setup control register - * is 32 bit !!! - */ - pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); - - addrCtrl &= (~0xF0); - addrCtrl |= ((unsigned int)pclk.address_time<<4); - pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); - - /* now let's set the remaining registers */ - pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r); - pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w); - pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8); - - addrCtrl >>= 4; - addrCtrl &= 0xF; - } - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " - "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", - drive->name, hwif->channel, drive->dn & 1, - addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); -#endif /* CY82C693_DEBUG_INFO */ -} - -static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) -{ - static ide_hwif_t *primary; - struct pci_dev *dev = to_pci_dev(hwif->dev); - - if (PCI_FUNC(dev->devfn) == 1) - primary = hwif; - else { - hwif->mate = primary; - hwif->channel = 1; - } -} - -static const struct ide_port_ops cy82c693_port_ops = { - .set_pio_mode = cy82c693_set_pio_mode, - .set_dma_mode = cy82c693_set_dma_mode, -}; - -static const struct ide_port_info cy82c693_chipset __devinitdata = { - .name = DRV_NAME, - .init_iops = init_iops_cy82c693, - .port_ops = &cy82c693_port_ops, - .chipset = ide_cy82c693, - .host_flags = IDE_HFLAG_SINGLE, - .pio_mask = ATA_PIO4, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, -}; - -static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct pci_dev *dev2; - int ret = -ENODEV; - - /* CY82C693 is more than only a IDE controller. - Function 1 is primary IDE channel, function 2 - secondary. */ - if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && - PCI_FUNC(dev->devfn) == 1) { - dev2 = pci_get_slot(dev->bus, dev->devfn + 1); - ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL); - if (ret) - pci_dev_put(dev2); - } - return ret; -} - -static void __devexit cy82c693_remove(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; - - ide_pci_remove(dev); - pci_dev_put(dev2); -} - -static const struct pci_device_id cy82c693_pci_tbl[] = { - { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl); - -static struct pci_driver cy82c693_pci_driver = { - .name = "Cypress_IDE", - .id_table = cy82c693_pci_tbl, - .probe = cy82c693_init_one, - .remove = __devexit_p(cy82c693_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init cy82c693_ide_init(void) -{ - return ide_pci_register_driver(&cy82c693_pci_driver); -} - -static void __exit cy82c693_ide_exit(void) -{ - pci_unregister_driver(&cy82c693_pci_driver); -} - -module_init(cy82c693_ide_init); -module_exit(cy82c693_ide_exit); - -MODULE_AUTHOR("Andreas Krebs, Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c deleted file mode 100644 index 8689a706f53..00000000000 --- a/drivers/ide/pci/delkin_cb.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Created 20 Oct 2004 by Mark Lord - * - * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter - * - * Modeled after the 16-bit PCMCIA driver: ide-cs.c - * - * This is slightly peculiar, in that it is a PCI driver, - * but is NOT an IDE PCI driver -- the IDE layer does not directly - * support hot insertion/removal of PCI interfaces, so this driver - * is unable to use the IDE PCI interfaces. Instead, it uses the - * same interfaces as the ide-cs (PCMCIA) driver uses. - * On the plus side, the driver is also smaller/simpler this way. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/ide.h> -#include <linux/init.h> -#include <linux/pci.h> - -#include <asm/io.h> - -/* - * No chip documentation has yet been found, - * so these configuration values were pulled from - * a running Win98 system using "debug". - * This gives around 3MByte/second read performance, - * which is about 2/3 of what the chip is capable of. - * - * There is also a 4KByte mmio region on the card, - * but its purpose has yet to be reverse-engineered. - */ -static const u8 setup[] = { - 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00, - 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13, -}; - -static const struct ide_port_ops delkin_cb_port_ops = { - .quirkproc = ide_undecoded_slave, -}; - -static const struct ide_port_info delkin_cb_port_info = { - .port_ops = &delkin_cb_port_ops, - .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | - IDE_HFLAG_NO_DMA, -}; - -static int __devinit -delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_host *host; - unsigned long base; - int i, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - rc = pci_enable_device(dev); - if (rc) { - printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc); - return rc; - } - rc = pci_request_regions(dev, "delkin_cb"); - if (rc) { - printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc); - pci_disable_device(dev); - return rc; - } - base = pci_resource_start(dev, 0); - outb(0x02, base + 0x1e); /* set nIEN to block interrupts */ - inb(base + 0x17); /* read status to clear interrupts */ - for (i = 0; i < sizeof(setup); ++i) { - if (setup[i]) - outb(setup[i], base + i); - } - - memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, base + 0x10, base + 0x1e); - hw.irq = dev->irq; - hw.dev = &dev->dev; - hw.chipset = ide_pci; /* this enables IRQ sharing */ - - rc = ide_host_add(&delkin_cb_port_info, hws, &host); - if (rc) - goto out_disable; - - pci_set_drvdata(dev, host); - - return 0; - -out_disable: - pci_release_regions(dev); - pci_disable_device(dev); - return rc; -} - -static void -delkin_cb_remove (struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - - ide_host_remove(host); - - pci_release_regions(dev); - pci_disable_device(dev); -} - -static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = { - { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl); - -static struct pci_driver delkin_cb_pci_driver = { - .name = "Delkin-ASKA-Workbit Cardbus IDE", - .id_table = delkin_cb_pci_tbl, - .probe = delkin_cb_probe, - .remove = delkin_cb_remove, -}; - -static int __init delkin_cb_init(void) -{ - return pci_register_driver(&delkin_cb_pci_driver); -} - -static void __exit delkin_cb_exit(void) -{ - pci_unregister_driver(&delkin_cb_pci_driver); -} - -module_init(delkin_cb_init); -module_exit(delkin_cb_exit); - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c deleted file mode 100644 index 474f96a7c07..00000000000 --- a/drivers/ide/pci/generic.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * For the avoidance of doubt the "preferred form" of this code is one which - * is in an open non patent encumbered format. Where cryptographic key signing - * forms part of the process of creating an executable the information - * including keys needed to generate an equivalently functional executable - * are deemed to be part of the source code. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "ide_pci_generic" - -static int ide_generic_all; /* Set to claim all devices */ - -module_param_named(all_generic_ide, ide_generic_all, bool, 0444); -MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); - -#define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS) - -#define DECLARE_GENERIC_PCI_DEV(extra_flags) \ - { \ - .name = DRV_NAME, \ - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \ - extra_flags, \ - .swdma_mask = ATA_SWDMA2, \ - .mwdma_mask = ATA_MWDMA2, \ - .udma_mask = ATA_UDMA6, \ - } - -static const struct ide_port_info generic_chipsets[] __devinitdata = { - /* 0: Unknown */ - DECLARE_GENERIC_PCI_DEV(0), - - { /* 1: NS87410 */ - .name = DRV_NAME, - .enablebits = { {0x43, 0x08, 0x08}, {0x47, 0x08, 0x08} }, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA6, - }, - - /* 2: SAMURAI / HT6565 / HINT_IDE */ - DECLARE_GENERIC_PCI_DEV(0), - /* 3: UM8673F / UM8886A / UM8886BF */ - DECLARE_GENERIC_PCI_DEV(IDE_HFLAGS_UMC), - /* 4: VIA_IDE / OPTI621V / Piccolo010{2,3,5} */ - DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_AUTODMA), - - { /* 5: VIA8237SATA */ - .name = DRV_NAME, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_OFF_BOARD, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA6, - }, - - { /* 6: Revolution */ - .name = DRV_NAME, - .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | - IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_OFF_BOARD, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA6, - } -}; - -/** - * generic_init_one - called when a PIIX is found - * @dev: the generic device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - */ - -static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct ide_port_info *d = &generic_chipsets[id->driver_data]; - int ret = -ENODEV; - - /* Don't use the generic entry unless instructed to do so */ - if (id->driver_data == 0 && ide_generic_all == 0) - goto out; - - switch (dev->vendor) { - case PCI_VENDOR_ID_UMC: - if (dev->device == PCI_DEVICE_ID_UMC_UM8886A && - !(PCI_FUNC(dev->devfn) & 1)) - goto out; /* UM8886A/BF pair */ - break; - case PCI_VENDOR_ID_OPTI: - if (dev->device == PCI_DEVICE_ID_OPTI_82C558 && - !(PCI_FUNC(dev->devfn) & 1)) - goto out; - break; - case PCI_VENDOR_ID_JMICRON: - if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 && - PCI_FUNC(dev->devfn) != 1) - goto out; - break; - case PCI_VENDOR_ID_NS: - if (dev->device == PCI_DEVICE_ID_NS_87410 && - (dev->class >> 8) != PCI_CLASS_STORAGE_IDE) - goto out; - break; - } - - if (dev->vendor != PCI_VENDOR_ID_JMICRON) { - u16 command; - pci_read_config_word(dev, PCI_COMMAND, &command); - if (!(command & PCI_COMMAND_IO)) { - printk(KERN_INFO "%s %s: skipping disabled " - "controller\n", d->name, pci_name(dev)); - goto out; - } - } - ret = ide_pci_init_one(dev, d, NULL); -out: - return ret; -} - -static const struct pci_device_id generic_pci_tbl[] = { - { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), 1 }, - { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), 2 }, - { PCI_VDEVICE(HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), 2 }, - { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8673F), 3 }, - { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886A), 3 }, - { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886BF), 3 }, - { PCI_VDEVICE(HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), 2 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C561), 4 }, - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C558), 4 }, -#ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237_SATA), 5 }, -#endif - { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO), 4 }, - { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), 4 }, - { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), 4 }, - { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), 6 }, - /* - * Must come last. If you add entries adjust - * this table and generic_chipsets[] appropriately. - */ - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, generic_pci_tbl); - -static struct pci_driver generic_pci_driver = { - .name = "PCI_IDE", - .id_table = generic_pci_tbl, - .probe = generic_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init generic_ide_init(void) -{ - return ide_pci_register_driver(&generic_pci_driver); -} - -static void __exit generic_ide_exit(void) -{ - pci_unregister_driver(&generic_pci_driver); -} - -module_init(generic_ide_init); -module_exit(generic_ide_exit); - -MODULE_AUTHOR("Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for generic PCI IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c deleted file mode 100644 index fb1a3aa57f0..00000000000 --- a/drivers/ide/pci/hpt34x.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * - * May be copied or modified under the terms of the GNU General Public License - * - * - * 00:12.0 Unknown mass storage controller: - * Triones Technologies, Inc. - * Unknown device 0003 (rev 01) - * - * hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010) - * hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030) - * hde: DMA 2 (0x0000 0x0002) (0x0000 0x0010) - * hdf: DMA 2 (0x0002 0x0012) (0x0010 0x0030) - * hdg: DMA 1 (0x0012 0x0052) (0x0030 0x0070) - * hdh: DMA 1 (0x0052 0x0252) (0x0070 0x00f0) - * - * ide-pci.c reference - * - * Since there are two cards that report almost identically, - * the only discernable difference is the values reported in pcicmd. - * Booting-BIOS card or HPT363 :: pcicmd == 0x07 - * Non-bootable card or HPT343 :: pcicmd == 0x05 - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> - -#define DRV_NAME "hpt34x" - -#define HPT343_DEBUG_DRIVE_INFO 0 - -static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; - u8 hi_speed, lo_speed; - - hi_speed = speed >> 4; - lo_speed = speed & 0x0f; - - if (hi_speed & 7) { - hi_speed = (hi_speed & 4) ? 0x01 : 0x10; - } else { - lo_speed <<= 5; - lo_speed >>= 5; - } - - pci_read_config_dword(dev, 0x44, ®1); - pci_read_config_dword(dev, 0x48, ®2); - tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn)))); - tmp2 = ((hi_speed << drive->dn) | (reg2 & ~(0x11 << drive->dn))); - pci_write_config_dword(dev, 0x44, tmp1); - pci_write_config_dword(dev, 0x48, tmp2); - -#if HPT343_DEBUG_DRIVE_INFO - printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \ - " (0x%02x 0x%02x)\n", - drive->name, ide_xfer_verbose(speed), - drive->dn, reg1, tmp1, reg2, tmp2, - hi_speed, lo_speed); -#endif /* HPT343_DEBUG_DRIVE_INFO */ -} - -static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - hpt34x_set_mode(drive, XFER_PIO_0 + pio); -} - -/* - * If the BIOS does not set the IO base addaress to XX00, 343 will fail. - */ -#define HPT34X_PCI_INIT_REG 0x80 - -static unsigned int init_chipset_hpt34x(struct pci_dev *dev) -{ - int i = 0; - unsigned long hpt34xIoBase = pci_resource_start(dev, 4); - unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c }; - unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 }; - u16 cmd; - unsigned long flags; - - local_irq_save(flags); - - pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00); - pci_read_config_word(dev, PCI_COMMAND, &cmd); - - if (cmd & PCI_COMMAND_MEMORY) - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0); - else - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); - - /* - * Since 20-23 can be assigned and are R/W, we correct them. - */ - pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO); - for(i=0; i<4; i++) { - dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]); - dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i]; - dev->resource[i].flags = IORESOURCE_IO; - pci_write_config_dword(dev, - (PCI_BASE_ADDRESS_0 + (i * 4)), - dev->resource[i].start); - } - pci_write_config_word(dev, PCI_COMMAND, cmd); - - local_irq_restore(flags); - - return dev->irq; -} - -static const struct ide_port_ops hpt34x_port_ops = { - .set_pio_mode = hpt34x_set_pio_mode, - .set_dma_mode = hpt34x_set_mode, -}; - -#define IDE_HFLAGS_HPT34X \ - (IDE_HFLAG_NO_ATAPI_DMA | \ - IDE_HFLAG_NO_DSC | \ - IDE_HFLAG_NO_AUTODMA) - -static const struct ide_port_info hpt34x_chipsets[] __devinitdata = { - { /* 0: HPT343 */ - .name = DRV_NAME, - .init_chipset = init_chipset_hpt34x, - .port_ops = &hpt34x_port_ops, - .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE, - .pio_mask = ATA_PIO5, - }, - { /* 1: HPT345 */ - .name = DRV_NAME, - .init_chipset = init_chipset_hpt34x, - .port_ops = &hpt34x_port_ops, - .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO5, -#ifdef CONFIG_HPT34X_AUTODMA - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, -#endif - } -}; - -static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct ide_port_info *d; - u16 pcicmd = 0; - - pci_read_config_word(dev, PCI_COMMAND, &pcicmd); - - d = &hpt34x_chipsets[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0]; - - return ide_pci_init_one(dev, d, NULL); -} - -static const struct pci_device_id hpt34x_pci_tbl[] = { - { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl); - -static struct pci_driver hpt34x_pci_driver = { - .name = "HPT34x_IDE", - .id_table = hpt34x_pci_tbl, - .probe = hpt34x_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init hpt34x_ide_init(void) -{ - return ide_pci_register_driver(&hpt34x_pci_driver); -} - -static void __exit hpt34x_ide_exit(void) -{ - pci_unregister_driver(&hpt34x_pci_driver); -} - -module_init(hpt34x_ide_init); -module_exit(hpt34x_ide_exit); - -MODULE_AUTHOR("Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c deleted file mode 100644 index 9cf171cb937..00000000000 --- a/drivers/ide/pci/hpt366.c +++ /dev/null @@ -1,1646 +0,0 @@ -/* - * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> - * Portions Copyright (C) 2001 Sun Microsystems, Inc. - * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. - * - * Thanks to HighPoint Technologies for their assistance, and hardware. - * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his - * donation of an ABit BP6 mainboard, processor, and memory acellerated - * development and support. - * - * - * HighPoint has its own drivers (open source except for the RAID part) - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. - * This may be useful to anyone wanting to work on this driver, however do not - * trust them too much since the code tends to become less and less meaningful - * as the time passes... :-/ - * - * Note that final HPT370 support was done by force extraction of GPL. - * - * - add function for getting/setting power status of drive - * - the HPT370's state machine can get confused. reset it before each dma - * xfer to prevent that from happening. - * - reset state engine whenever we get an error. - * - check for busmaster state at end of dma. - * - use new highpoint timings. - * - detect bus speed using highpoint register. - * - use pll if we don't have a clock table. added a 66MHz table that's - * just 2x the 33MHz table. - * - removed turnaround. NOTE: we never want to switch between pll and - * pci clocks as the chip can glitch in those cases. the highpoint - * approved workaround slows everything down too much to be useful. in - * addition, we would have to serialize access to each chip. - * Adrian Sun <a.sun@sun.com> - * - * add drive timings for 66MHz PCI bus, - * fix ATA Cable signal detection, fix incorrect /proc info - * add /proc display for per-drive PIO/DMA/UDMA mode and - * per-channel ATA-33/66 Cable detect. - * Duncan Laurie <void@sun.com> - * - * fixup /proc output for multiple controllers - * Tim Hockin <thockin@sun.com> - * - * On hpt366: - * Reset the hpt366 on error, reset on dma - * Fix disabling Fast Interrupt hpt366. - * Mike Waychison <crlf@sun.com> - * - * Added support for 372N clocking and clock switching. The 372N needs - * different clocks on read/write. This requires overloading rw_disk and - * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for - * keeping me sane. - * Alan Cox <alan@redhat.com> - * - * - fix the clock turnaround code: it was writing to the wrong ports when - * called for the secondary channel, caching the current clock mode per- - * channel caused the cached register value to get out of sync with the - * actual one, the channels weren't serialized, the turnaround shouldn't - * be done on 66 MHz PCI bus - * - disable UltraATA/100 for HPT370 by default as the 33 MHz clock being used - * does not allow for this speed anyway - * - avoid touching disabled channels (e.g. HPT371/N are single channel chips, - * their primary channel is kind of virtual, it isn't tied to any pins) - * - fix/remove bad/unused timing tables and use one set of tables for the whole - * HPT37x chip family; save space by introducing the separate transfer mode - * table in which the mode lookup is done - * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives - * the wrong PCI frequency since DPLL has already been calibrated by BIOS; - * read it only from the function 0 of HPT374 chips - * - fix the hotswap code: it caused RESET- to glitch when tristating the bus, - * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead - * - pass to init_chipset() handlers a copy of the IDE PCI device structure as - * they tamper with its fields - * - pass to the init_setup handlers a copy of the ide_pci_device_t structure - * since they may tamper with its fields - * - prefix the driver startup messages with the real chip name - * - claim the extra 240 bytes of I/O space for all chips - * - optimize the UltraDMA filtering and the drive list lookup code - * - use pci_get_slot() to get to the function 1 of HPT36x/374 - * - cache offset of the channel's misc. control registers (MCRs) being used - * throughout the driver - * - only touch the relevant MCR when detecting the cable type on HPT374's - * function 1 - * - rename all the register related variables consistently - * - move all the interrupt twiddling code from the speedproc handlers into - * init_hwif_hpt366(), also grouping all the DMA related code together there - * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and - * separate the UltraDMA and MWDMA masks there to avoid changing PIO timings - * when setting an UltraDMA mode - * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select - * the best possible one - * - clean up DMA timeout handling for HPT370 - * - switch to using the enumeration type to differ between the numerous chip - * variants, matching PCI device/revision ID with the chip type early, at the - * init_setup stage - * - extend the hpt_info structure to hold the DPLL and PCI clock frequencies, - * stop duplicating it for each channel by storing the pointer in the pci_dev - * structure: first, at the init_setup stage, point it to a static "template" - * with only the chip type and its specific base DPLL frequency, the highest - * UltraDMA mode, and the chip settings table pointer filled, then, at the - * init_chipset stage, allocate per-chip instance and fill it with the rest - * of the necessary information - * - get rid of the constant thresholds in the HPT37x PCI clock detection code, - * switch to calculating PCI clock frequency based on the chip's base DPLL - * frequency - * - switch to using the DPLL clock and enable UltraATA/133 mode by default on - * anything newer than HPT370/A (except HPT374 that is not capable of this - * mode according to the manual) - * - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(), - * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips; - * unify HPT36x/37x timing setup code and the speedproc handlers by joining - * the register setting lists into the table indexed by the clock selected - * - set the correct hwif->ultra_mask for each individual chip - * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards - * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com> - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/blkdev.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - -#define DRV_NAME "hpt366" - -/* various tuning parameters */ -#define HPT_RESET_STATE_ENGINE -#undef HPT_DELAY_INTERRUPT -#define HPT_SERIALIZE_IO 0 - -static const char *quirk_drives[] = { - "QUANTUM FIREBALLlct08 08", - "QUANTUM FIREBALLP KA6.4", - "QUANTUM FIREBALLP LM20.4", - "QUANTUM FIREBALLP LM20.5", - NULL -}; - -static const char *bad_ata100_5[] = { - "IBM-DTLA-307075", - "IBM-DTLA-307060", - "IBM-DTLA-307045", - "IBM-DTLA-307030", - "IBM-DTLA-307020", - "IBM-DTLA-307015", - "IBM-DTLA-305040", - "IBM-DTLA-305030", - "IBM-DTLA-305020", - "IC35L010AVER07-0", - "IC35L020AVER07-0", - "IC35L030AVER07-0", - "IC35L040AVER07-0", - "IC35L060AVER07-0", - "WDC AC310200R", - NULL -}; - -static const char *bad_ata66_4[] = { - "IBM-DTLA-307075", - "IBM-DTLA-307060", - "IBM-DTLA-307045", - "IBM-DTLA-307030", - "IBM-DTLA-307020", - "IBM-DTLA-307015", - "IBM-DTLA-305040", - "IBM-DTLA-305030", - "IBM-DTLA-305020", - "IC35L010AVER07-0", - "IC35L020AVER07-0", - "IC35L030AVER07-0", - "IC35L040AVER07-0", - "IC35L060AVER07-0", - "WDC AC310200R", - "MAXTOR STM3320620A", - NULL -}; - -static const char *bad_ata66_3[] = { - "WDC AC310200R", - NULL -}; - -static const char *bad_ata33[] = { - "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", - "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", - "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", - "Maxtor 90510D4", - "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", - "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", - "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", - NULL -}; - -static u8 xfer_speeds[] = { - XFER_UDMA_6, - XFER_UDMA_5, - XFER_UDMA_4, - XFER_UDMA_3, - XFER_UDMA_2, - XFER_UDMA_1, - XFER_UDMA_0, - - XFER_MW_DMA_2, - XFER_MW_DMA_1, - XFER_MW_DMA_0, - - XFER_PIO_4, - XFER_PIO_3, - XFER_PIO_2, - XFER_PIO_1, - XFER_PIO_0 -}; - -/* Key for bus clock timings - * 36x 37x - * bits bits - * 0:3 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. - * cycles = value + 1 - * 4:7 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. - * cycles = value + 1 - * 8:11 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file - * register access. - * 12:15 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file - * register access. - * 16:18 18:20 udma_cycle_time. Clock cycles for UDMA xfer. - * - 21 CLK frequency: 0=ATA clock, 1=dual ATA clock. - * 19:21 22:24 pre_high_time. Time to initialize the 1st cycle for PIO and - * MW DMA xfer. - * 22:24 25:27 cmd_pre_high_time. Time to initialize the 1st PIO cycle for - * task file register access. - * 28 28 UDMA enable. - * 29 29 DMA enable. - * 30 30 PIO MST enable. If set, the chip is in bus master mode during - * PIO xfer. - * 31 31 FIFO enable. - */ - -static u32 forty_base_hpt36x[] = { - /* XFER_UDMA_6 */ 0x900fd943, - /* XFER_UDMA_5 */ 0x900fd943, - /* XFER_UDMA_4 */ 0x900fd943, - /* XFER_UDMA_3 */ 0x900ad943, - /* XFER_UDMA_2 */ 0x900bd943, - /* XFER_UDMA_1 */ 0x9008d943, - /* XFER_UDMA_0 */ 0x9008d943, - - /* XFER_MW_DMA_2 */ 0xa008d943, - /* XFER_MW_DMA_1 */ 0xa010d955, - /* XFER_MW_DMA_0 */ 0xa010d9fc, - - /* XFER_PIO_4 */ 0xc008d963, - /* XFER_PIO_3 */ 0xc010d974, - /* XFER_PIO_2 */ 0xc010d997, - /* XFER_PIO_1 */ 0xc010d9c7, - /* XFER_PIO_0 */ 0xc018d9d9 -}; - -static u32 thirty_three_base_hpt36x[] = { - /* XFER_UDMA_6 */ 0x90c9a731, - /* XFER_UDMA_5 */ 0x90c9a731, - /* XFER_UDMA_4 */ 0x90c9a731, - /* XFER_UDMA_3 */ 0x90cfa731, - /* XFER_UDMA_2 */ 0x90caa731, - /* XFER_UDMA_1 */ 0x90cba731, - /* XFER_UDMA_0 */ 0x90c8a731, - - /* XFER_MW_DMA_2 */ 0xa0c8a731, - /* XFER_MW_DMA_1 */ 0xa0c8a732, /* 0xa0c8a733 */ - /* XFER_MW_DMA_0 */ 0xa0c8a797, - - /* XFER_PIO_4 */ 0xc0c8a731, - /* XFER_PIO_3 */ 0xc0c8a742, - /* XFER_PIO_2 */ 0xc0d0a753, - /* XFER_PIO_1 */ 0xc0d0a7a3, /* 0xc0d0a793 */ - /* XFER_PIO_0 */ 0xc0d0a7aa /* 0xc0d0a7a7 */ -}; - -static u32 twenty_five_base_hpt36x[] = { - /* XFER_UDMA_6 */ 0x90c98521, - /* XFER_UDMA_5 */ 0x90c98521, - /* XFER_UDMA_4 */ 0x90c98521, - /* XFER_UDMA_3 */ 0x90cf8521, - /* XFER_UDMA_2 */ 0x90cf8521, - /* XFER_UDMA_1 */ 0x90cb8521, - /* XFER_UDMA_0 */ 0x90cb8521, - - /* XFER_MW_DMA_2 */ 0xa0ca8521, - /* XFER_MW_DMA_1 */ 0xa0ca8532, - /* XFER_MW_DMA_0 */ 0xa0ca8575, - - /* XFER_PIO_4 */ 0xc0ca8521, - /* XFER_PIO_3 */ 0xc0ca8532, - /* XFER_PIO_2 */ 0xc0ca8542, - /* XFER_PIO_1 */ 0xc0d08572, - /* XFER_PIO_0 */ 0xc0d08585 -}; - -#if 0 -/* These are the timing tables from the HighPoint open source drivers... */ -static u32 thirty_three_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */ - /* XFER_UDMA_5 */ 0x12446231, - /* XFER_UDMA_4 */ 0x12446231, - /* XFER_UDMA_3 */ 0x126c6231, - /* XFER_UDMA_2 */ 0x12486231, - /* XFER_UDMA_1 */ 0x124c6233, - /* XFER_UDMA_0 */ 0x12506297, - - /* XFER_MW_DMA_2 */ 0x22406c31, - /* XFER_MW_DMA_1 */ 0x22406c33, - /* XFER_MW_DMA_0 */ 0x22406c97, - - /* XFER_PIO_4 */ 0x06414e31, - /* XFER_PIO_3 */ 0x06414e42, - /* XFER_PIO_2 */ 0x06414e53, - /* XFER_PIO_1 */ 0x06814e93, - /* XFER_PIO_0 */ 0x06814ea7 -}; - -static u32 fifty_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x12848242, - /* XFER_UDMA_5 */ 0x12848242, - /* XFER_UDMA_4 */ 0x12ac8242, - /* XFER_UDMA_3 */ 0x128c8242, - /* XFER_UDMA_2 */ 0x120c8242, - /* XFER_UDMA_1 */ 0x12148254, - /* XFER_UDMA_0 */ 0x121882ea, - - /* XFER_MW_DMA_2 */ 0x22808242, - /* XFER_MW_DMA_1 */ 0x22808254, - /* XFER_MW_DMA_0 */ 0x228082ea, - - /* XFER_PIO_4 */ 0x0a81f442, - /* XFER_PIO_3 */ 0x0a81f443, - /* XFER_PIO_2 */ 0x0a81f454, - /* XFER_PIO_1 */ 0x0ac1f465, - /* XFER_PIO_0 */ 0x0ac1f48a -}; - -static u32 sixty_six_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x1c869c62, - /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */ - /* XFER_UDMA_4 */ 0x1c8a9c62, - /* XFER_UDMA_3 */ 0x1c8e9c62, - /* XFER_UDMA_2 */ 0x1c929c62, - /* XFER_UDMA_1 */ 0x1c9a9c62, - /* XFER_UDMA_0 */ 0x1c829c62, - - /* XFER_MW_DMA_2 */ 0x2c829c62, - /* XFER_MW_DMA_1 */ 0x2c829c66, - /* XFER_MW_DMA_0 */ 0x2c829d2e, - - /* XFER_PIO_4 */ 0x0c829c62, - /* XFER_PIO_3 */ 0x0c829c84, - /* XFER_PIO_2 */ 0x0c829ca6, - /* XFER_PIO_1 */ 0x0d029d26, - /* XFER_PIO_0 */ 0x0d029d5e -}; -#else -/* - * The following are the new timing tables with PIO mode data/taskfile transfer - * overclocking fixed... - */ - -/* This table is taken from the HPT370 data manual rev. 1.02 */ -static u32 thirty_three_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */ - /* XFER_UDMA_5 */ 0x16455031, - /* XFER_UDMA_4 */ 0x16455031, - /* XFER_UDMA_3 */ 0x166d5031, - /* XFER_UDMA_2 */ 0x16495031, - /* XFER_UDMA_1 */ 0x164d5033, - /* XFER_UDMA_0 */ 0x16515097, - - /* XFER_MW_DMA_2 */ 0x26515031, - /* XFER_MW_DMA_1 */ 0x26515033, - /* XFER_MW_DMA_0 */ 0x26515097, - - /* XFER_PIO_4 */ 0x06515021, - /* XFER_PIO_3 */ 0x06515022, - /* XFER_PIO_2 */ 0x06515033, - /* XFER_PIO_1 */ 0x06915065, - /* XFER_PIO_0 */ 0x06d1508a -}; - -static u32 fifty_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x1a861842, - /* XFER_UDMA_5 */ 0x1a861842, - /* XFER_UDMA_4 */ 0x1aae1842, - /* XFER_UDMA_3 */ 0x1a8e1842, - /* XFER_UDMA_2 */ 0x1a0e1842, - /* XFER_UDMA_1 */ 0x1a161854, - /* XFER_UDMA_0 */ 0x1a1a18ea, - - /* XFER_MW_DMA_2 */ 0x2a821842, - /* XFER_MW_DMA_1 */ 0x2a821854, - /* XFER_MW_DMA_0 */ 0x2a8218ea, - - /* XFER_PIO_4 */ 0x0a821842, - /* XFER_PIO_3 */ 0x0a821843, - /* XFER_PIO_2 */ 0x0a821855, - /* XFER_PIO_1 */ 0x0ac218a8, - /* XFER_PIO_0 */ 0x0b02190c -}; - -static u32 sixty_six_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x1c86fe62, - /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */ - /* XFER_UDMA_4 */ 0x1c8afe62, - /* XFER_UDMA_3 */ 0x1c8efe62, - /* XFER_UDMA_2 */ 0x1c92fe62, - /* XFER_UDMA_1 */ 0x1c9afe62, - /* XFER_UDMA_0 */ 0x1c82fe62, - - /* XFER_MW_DMA_2 */ 0x2c82fe62, - /* XFER_MW_DMA_1 */ 0x2c82fe66, - /* XFER_MW_DMA_0 */ 0x2c82ff2e, - - /* XFER_PIO_4 */ 0x0c82fe62, - /* XFER_PIO_3 */ 0x0c82fe84, - /* XFER_PIO_2 */ 0x0c82fea6, - /* XFER_PIO_1 */ 0x0d02ff26, - /* XFER_PIO_0 */ 0x0d42ff7f -}; -#endif - -#define HPT366_DEBUG_DRIVE_INFO 0 -#define HPT371_ALLOW_ATA133_6 1 -#define HPT302_ALLOW_ATA133_6 1 -#define HPT372_ALLOW_ATA133_6 1 -#define HPT370_ALLOW_ATA100_5 0 -#define HPT366_ALLOW_ATA66_4 1 -#define HPT366_ALLOW_ATA66_3 1 -#define HPT366_MAX_DEVS 8 - -/* Supported ATA clock frequencies */ -enum ata_clock { - ATA_CLOCK_25MHZ, - ATA_CLOCK_33MHZ, - ATA_CLOCK_40MHZ, - ATA_CLOCK_50MHZ, - ATA_CLOCK_66MHZ, - NUM_ATA_CLOCKS -}; - -struct hpt_timings { - u32 pio_mask; - u32 dma_mask; - u32 ultra_mask; - u32 *clock_table[NUM_ATA_CLOCKS]; -}; - -/* - * Hold all the HighPoint chip information in one place. - */ - -struct hpt_info { - char *chip_name; /* Chip name */ - u8 chip_type; /* Chip type */ - u8 udma_mask; /* Allowed UltraDMA modes mask. */ - u8 dpll_clk; /* DPLL clock in MHz */ - u8 pci_clk; /* PCI clock in MHz */ - struct hpt_timings *timings; /* Chipset timing data */ - u8 clock; /* ATA clock selected */ -}; - -/* Supported HighPoint chips */ -enum { - HPT36x, - HPT370, - HPT370A, - HPT374, - HPT372, - HPT372A, - HPT302, - HPT371, - HPT372N, - HPT302N, - HPT371N -}; - -static struct hpt_timings hpt36x_timings = { - .pio_mask = 0xc1f8ffff, - .dma_mask = 0x303800ff, - .ultra_mask = 0x30070000, - .clock_table = { - [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x, - [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x, - [ATA_CLOCK_40MHZ] = forty_base_hpt36x, - [ATA_CLOCK_50MHZ] = NULL, - [ATA_CLOCK_66MHZ] = NULL - } -}; - -static struct hpt_timings hpt37x_timings = { - .pio_mask = 0xcfc3ffff, - .dma_mask = 0x31c001ff, - .ultra_mask = 0x303c0000, - .clock_table = { - [ATA_CLOCK_25MHZ] = NULL, - [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x, - [ATA_CLOCK_40MHZ] = NULL, - [ATA_CLOCK_50MHZ] = fifty_base_hpt37x, - [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x - } -}; - -static const struct hpt_info hpt36x __devinitdata = { - .chip_name = "HPT36x", - .chip_type = HPT36x, - .udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2, - .dpll_clk = 0, /* no DPLL */ - .timings = &hpt36x_timings -}; - -static const struct hpt_info hpt370 __devinitdata = { - .chip_name = "HPT370", - .chip_type = HPT370, - .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, - .dpll_clk = 48, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt370a __devinitdata = { - .chip_name = "HPT370A", - .chip_type = HPT370A, - .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, - .dpll_clk = 48, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt374 __devinitdata = { - .chip_name = "HPT374", - .chip_type = HPT374, - .udma_mask = ATA_UDMA5, - .dpll_clk = 48, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt372 __devinitdata = { - .chip_name = "HPT372", - .chip_type = HPT372, - .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, - .dpll_clk = 55, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt372a __devinitdata = { - .chip_name = "HPT372A", - .chip_type = HPT372A, - .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, - .dpll_clk = 66, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt302 __devinitdata = { - .chip_name = "HPT302", - .chip_type = HPT302, - .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, - .dpll_clk = 66, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt371 __devinitdata = { - .chip_name = "HPT371", - .chip_type = HPT371, - .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, - .dpll_clk = 66, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt372n __devinitdata = { - .chip_name = "HPT372N", - .chip_type = HPT372N, - .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, - .dpll_clk = 77, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt302n __devinitdata = { - .chip_name = "HPT302N", - .chip_type = HPT302N, - .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, - .dpll_clk = 77, - .timings = &hpt37x_timings -}; - -static const struct hpt_info hpt371n __devinitdata = { - .chip_name = "HPT371N", - .chip_type = HPT371N, - .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, - .dpll_clk = 77, - .timings = &hpt37x_timings -}; - -static int check_in_drive_list(ide_drive_t *drive, const char **list) -{ - char *m = (char *)&drive->id[ATA_ID_PROD]; - - while (*list) - if (!strcmp(*list++, m)) - return 1; - return 0; -} - -static struct hpt_info *hpt3xx_get_info(struct device *dev) -{ - struct ide_host *host = dev_get_drvdata(dev); - struct hpt_info *info = (struct hpt_info *)host->host_priv; - - return dev == host->dev[1] ? info + 1 : info; -} - -/* - * The Marvell bridge chips used on the HighPoint SATA cards do not seem - * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... - */ - -static u8 hpt3xx_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct hpt_info *info = hpt3xx_get_info(hwif->dev); - u8 mask = hwif->ultra_mask; - - switch (info->chip_type) { - case HPT36x: - if (!HPT366_ALLOW_ATA66_4 || - check_in_drive_list(drive, bad_ata66_4)) - mask = ATA_UDMA3; - - if (!HPT366_ALLOW_ATA66_3 || - check_in_drive_list(drive, bad_ata66_3)) - mask = ATA_UDMA2; - break; - case HPT370: - if (!HPT370_ALLOW_ATA100_5 || - check_in_drive_list(drive, bad_ata100_5)) - mask = ATA_UDMA4; - break; - case HPT370A: - if (!HPT370_ALLOW_ATA100_5 || - check_in_drive_list(drive, bad_ata100_5)) - return ATA_UDMA4; - case HPT372 : - case HPT372A: - case HPT372N: - case HPT374 : - if (ata_id_is_sata(drive->id)) - mask &= ~0x0e; - /* Fall thru */ - default: - return mask; - } - - return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask; -} - -static u8 hpt3xx_mdma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct hpt_info *info = hpt3xx_get_info(hwif->dev); - - switch (info->chip_type) { - case HPT372 : - case HPT372A: - case HPT372N: - case HPT374 : - if (ata_id_is_sata(drive->id)) - return 0x00; - /* Fall thru */ - default: - return 0x07; - } -} - -static u32 get_speed_setting(u8 speed, struct hpt_info *info) -{ - int i; - - /* - * Lookup the transfer mode table to get the index into - * the timing table. - * - * NOTE: For XFER_PIO_SLOW, PIO mode 0 timings will be used. - */ - for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++) - if (xfer_speeds[i] == speed) - break; - - return info->timings->clock_table[info->clock][i]; -} - -static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct hpt_info *info = hpt3xx_get_info(hwif->dev); - struct hpt_timings *t = info->timings; - u8 itr_addr = 0x40 + (drive->dn * 4); - u32 old_itr = 0; - u32 new_itr = get_speed_setting(speed, info); - u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask : - (speed < XFER_UDMA_0 ? t->dma_mask : - t->ultra_mask); - - pci_read_config_dword(dev, itr_addr, &old_itr); - new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask); - /* - * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) - * to avoid problems handling I/O errors later - */ - new_itr &= ~0xc0000000; - - pci_write_config_dword(dev, itr_addr, new_itr); -} - -static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - hpt3xx_set_mode(drive, XFER_PIO_0 + pio); -} - -static void hpt3xx_quirkproc(ide_drive_t *drive) -{ - char *m = (char *)&drive->id[ATA_ID_PROD]; - const char **list = quirk_drives; - - while (*list) - if (strstr(m, *list++)) { - drive->quirk_list = 1; - return; - } - - drive->quirk_list = 0; -} - -static void hpt3xx_maskproc(ide_drive_t *drive, int mask) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct hpt_info *info = hpt3xx_get_info(hwif->dev); - - if (drive->quirk_list) { - if (info->chip_type >= HPT370) { - u8 scr1 = 0; - - pci_read_config_byte(dev, 0x5a, &scr1); - if (((scr1 & 0x10) >> 4) != mask) { - if (mask) - scr1 |= 0x10; - else - scr1 &= ~0x10; - pci_write_config_byte(dev, 0x5a, scr1); - } - } else { - if (mask) - disable_irq(hwif->irq); - else - enable_irq (hwif->irq); - } - } else - outb(ATA_DEVCTL_OBS | (mask ? 2 : 0), hwif->io_ports.ctl_addr); -} - -/* - * This is specific to the HPT366 UDMA chipset - * by HighPoint|Triones Technologies, Inc. - */ -static void hpt366_dma_lost_irq(ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u8 mcr1 = 0, mcr3 = 0, scr1 = 0; - - pci_read_config_byte(dev, 0x50, &mcr1); - pci_read_config_byte(dev, 0x52, &mcr3); - pci_read_config_byte(dev, 0x5a, &scr1); - printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n", - drive->name, __func__, mcr1, mcr3, scr1); - if (scr1 & 0x10) - pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); - ide_dma_lost_irq(drive); -} - -static void hpt370_clear_engine(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - - pci_write_config_byte(dev, hwif->select_data, 0x37); - udelay(10); -} - -static void hpt370_irq_timeout(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 bfifo = 0; - u8 dma_cmd; - - pci_read_config_word(dev, hwif->select_data + 2, &bfifo); - printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff); - - /* get DMA command mode */ - dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - /* stop DMA */ - outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD); - hpt370_clear_engine(drive); -} - -static void hpt370_dma_start(ide_drive_t *drive) -{ -#ifdef HPT_RESET_STATE_ENGINE - hpt370_clear_engine(drive); -#endif - ide_dma_start(drive); -} - -static int hpt370_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - - if (dma_stat & 0x01) { - /* wait a little */ - udelay(20); - dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - if (dma_stat & 0x01) - hpt370_irq_timeout(drive); - } - return ide_dma_end(drive); -} - -static void hpt370_dma_timeout(ide_drive_t *drive) -{ - hpt370_irq_timeout(drive); - ide_dma_timeout(drive); -} - -/* returns 1 if DMA IRQ issued, 0 otherwise */ -static int hpt374_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 bfifo = 0; - u8 dma_stat; - - pci_read_config_word(dev, hwif->select_data + 2, &bfifo); - if (bfifo & 0x1FF) { -// printk("%s: %d bytes in FIFO\n", drive->name, bfifo); - return 0; - } - - dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - /* return 1 if INTR asserted */ - if (dma_stat & 4) - return 1; - - return 0; -} - -static int hpt374_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 mcr = 0, mcr_addr = hwif->select_data; - u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01; - - pci_read_config_byte(dev, 0x6a, &bwsr); - pci_read_config_byte(dev, mcr_addr, &mcr); - if (bwsr & mask) - pci_write_config_byte(dev, mcr_addr, mcr | 0x30); - return ide_dma_end(drive); -} - -/** - * hpt3xxn_set_clock - perform clock switching dance - * @hwif: hwif to switch - * @mode: clocking mode (0x21 for write, 0x23 otherwise) - * - * Switch the DPLL clock on the HPT3xxN devices. This is a right mess. - */ - -static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode) -{ - unsigned long base = hwif->extra_base; - u8 scr2 = inb(base + 0x6b); - - if ((scr2 & 0x7f) == mode) - return; - - /* Tristate the bus */ - outb(0x80, base + 0x63); - outb(0x80, base + 0x67); - - /* Switch clock and reset channels */ - outb(mode, base + 0x6b); - outb(0xc0, base + 0x69); - - /* - * Reset the state machines. - * NOTE: avoid accidentally enabling the disabled channels. - */ - outb(inb(base + 0x60) | 0x32, base + 0x60); - outb(inb(base + 0x64) | 0x32, base + 0x64); - - /* Complete reset */ - outb(0x00, base + 0x69); - - /* Reconnect channels to bus */ - outb(0x00, base + 0x63); - outb(0x00, base + 0x67); -} - -/** - * hpt3xxn_rw_disk - prepare for I/O - * @drive: drive for command - * @rq: block request structure - * - * This is called when a disk I/O is issued to HPT3xxN. - * We need it because of the clock switching. - */ - -static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) -{ - hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21); -} - -/** - * hpt37x_calibrate_dpll - calibrate the DPLL - * @dev: PCI device - * - * Perform a calibration cycle on the DPLL. - * Returns 1 if this succeeds - */ -static int hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high) -{ - u32 dpll = (f_high << 16) | f_low | 0x100; - u8 scr2; - int i; - - pci_write_config_dword(dev, 0x5c, dpll); - - /* Wait for oscillator ready */ - for(i = 0; i < 0x5000; ++i) { - udelay(50); - pci_read_config_byte(dev, 0x5b, &scr2); - if (scr2 & 0x80) - break; - } - /* See if it stays ready (we'll just bail out if it's not yet) */ - for(i = 0; i < 0x1000; ++i) { - pci_read_config_byte(dev, 0x5b, &scr2); - /* DPLL destabilized? */ - if(!(scr2 & 0x80)) - return 0; - } - /* Turn off tuning, we have the DPLL set */ - pci_read_config_dword (dev, 0x5c, &dpll); - pci_write_config_dword(dev, 0x5c, (dpll & ~0x100)); - return 1; -} - -static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]); - u8 chip_type = info->chip_type; - u8 new_mcr, old_mcr = 0; - - /* - * Disable the "fast interrupt" prediction. Don't hold off - * on interrupts. (== 0x01 despite what the docs say) - */ - pci_read_config_byte(dev, mcr_addr + 1, &old_mcr); - - if (chip_type >= HPT374) - new_mcr = old_mcr & ~0x07; - else if (chip_type >= HPT370) { - new_mcr = old_mcr; - new_mcr &= ~0x02; -#ifdef HPT_DELAY_INTERRUPT - new_mcr &= ~0x01; -#else - new_mcr |= 0x01; -#endif - } else /* HPT366 and HPT368 */ - new_mcr = old_mcr & ~0x80; - - if (new_mcr != old_mcr) - pci_write_config_byte(dev, mcr_addr + 1, new_mcr); -} - -static unsigned int init_chipset_hpt366(struct pci_dev *dev) -{ - unsigned long io_base = pci_resource_start(dev, 4); - struct hpt_info *info = hpt3xx_get_info(&dev->dev); - const char *name = DRV_NAME; - u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ - u8 chip_type; - enum ata_clock clock; - - chip_type = info->chip_type; - - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); - pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); - pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); - - /* - * First, try to estimate the PCI clock frequency... - */ - if (chip_type >= HPT370) { - u8 scr1 = 0; - u16 f_cnt = 0; - u32 temp = 0; - - /* Interrupt force enable. */ - pci_read_config_byte(dev, 0x5a, &scr1); - if (scr1 & 0x10) - pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); - - /* - * HighPoint does this for HPT372A. - * NOTE: This register is only writeable via I/O space. - */ - if (chip_type == HPT372A) - outb(0x0e, io_base + 0x9c); - - /* - * Default to PCI clock. Make sure MA15/16 are set to output - * to prevent drives having problems with 40-pin cables. - */ - pci_write_config_byte(dev, 0x5b, 0x23); - - /* - * We'll have to read f_CNT value in order to determine - * the PCI clock frequency according to the following ratio: - * - * f_CNT = Fpci * 192 / Fdpll - * - * First try reading the register in which the HighPoint BIOS - * saves f_CNT value before reprogramming the DPLL from its - * default setting (which differs for the various chips). - * - * NOTE: This register is only accessible via I/O space; - * HPT374 BIOS only saves it for the function 0, so we have to - * always read it from there -- no need to check the result of - * pci_get_slot() for the function 0 as the whole device has - * been already "pinned" (via function 1) in init_setup_hpt374() - */ - if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { - struct pci_dev *dev1 = pci_get_slot(dev->bus, - dev->devfn - 1); - unsigned long io_base = pci_resource_start(dev1, 4); - - temp = inl(io_base + 0x90); - pci_dev_put(dev1); - } else - temp = inl(io_base + 0x90); - - /* - * In case the signature check fails, we'll have to - * resort to reading the f_CNT register itself in hopes - * that nobody has touched the DPLL yet... - */ - if ((temp & 0xFFFFF000) != 0xABCDE000) { - int i; - - printk(KERN_WARNING "%s %s: no clock data saved by " - "BIOS\n", name, pci_name(dev)); - - /* Calculate the average value of f_CNT. */ - for (temp = i = 0; i < 128; i++) { - pci_read_config_word(dev, 0x78, &f_cnt); - temp += f_cnt & 0x1ff; - mdelay(1); - } - f_cnt = temp / 128; - } else - f_cnt = temp & 0x1ff; - - dpll_clk = info->dpll_clk; - pci_clk = (f_cnt * dpll_clk) / 192; - - /* Clamp PCI clock to bands. */ - if (pci_clk < 40) - pci_clk = 33; - else if(pci_clk < 45) - pci_clk = 40; - else if(pci_clk < 55) - pci_clk = 50; - else - pci_clk = 66; - - printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, " - "assuming %d MHz PCI\n", name, pci_name(dev), - dpll_clk, f_cnt, pci_clk); - } else { - u32 itr1 = 0; - - pci_read_config_dword(dev, 0x40, &itr1); - - /* Detect PCI clock by looking at cmd_high_time. */ - switch((itr1 >> 8) & 0x07) { - case 0x09: - pci_clk = 40; - break; - case 0x05: - pci_clk = 25; - break; - case 0x07: - default: - pci_clk = 33; - break; - } - } - - /* Let's assume we'll use PCI clock for the ATA clock... */ - switch (pci_clk) { - case 25: - clock = ATA_CLOCK_25MHZ; - break; - case 33: - default: - clock = ATA_CLOCK_33MHZ; - break; - case 40: - clock = ATA_CLOCK_40MHZ; - break; - case 50: - clock = ATA_CLOCK_50MHZ; - break; - case 66: - clock = ATA_CLOCK_66MHZ; - break; - } - - /* - * Only try the DPLL if we don't have a table for the PCI clock that - * we are running at for HPT370/A, always use it for anything newer... - * - * NOTE: Using the internal DPLL results in slow reads on 33 MHz PCI. - * We also don't like using the DPLL because this causes glitches - * on PRST-/SRST- when the state engine gets reset... - */ - if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) { - u16 f_low, delta = pci_clk < 50 ? 2 : 4; - int adjust; - - /* - * Select 66 MHz DPLL clock only if UltraATA/133 mode is - * supported/enabled, use 50 MHz DPLL clock otherwise... - */ - if (info->udma_mask == ATA_UDMA6) { - dpll_clk = 66; - clock = ATA_CLOCK_66MHZ; - } else if (dpll_clk) { /* HPT36x chips don't have DPLL */ - dpll_clk = 50; - clock = ATA_CLOCK_50MHZ; - } - - if (info->timings->clock_table[clock] == NULL) { - printk(KERN_ERR "%s %s: unknown bus timing!\n", - name, pci_name(dev)); - return -EIO; - } - - /* Select the DPLL clock. */ - pci_write_config_byte(dev, 0x5b, 0x21); - - /* - * Adjust the DPLL based upon PCI clock, enable it, - * and wait for stabilization... - */ - f_low = (pci_clk * 48) / dpll_clk; - - for (adjust = 0; adjust < 8; adjust++) { - if(hpt37x_calibrate_dpll(dev, f_low, f_low + delta)) - break; - - /* - * See if it'll settle at a fractionally different clock - */ - if (adjust & 1) - f_low -= adjust >> 1; - else - f_low += adjust >> 1; - } - if (adjust == 8) { - printk(KERN_ERR "%s %s: DPLL did not stabilize!\n", - name, pci_name(dev)); - return -EIO; - } - - printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n", - name, pci_name(dev), dpll_clk); - } else { - /* Mark the fact that we're not using the DPLL. */ - dpll_clk = 0; - - printk(KERN_INFO "%s %s: using %d MHz PCI clock\n", - name, pci_name(dev), pci_clk); - } - - /* Store the clock frequencies. */ - info->dpll_clk = dpll_clk; - info->pci_clk = pci_clk; - info->clock = clock; - - if (chip_type >= HPT370) { - u8 mcr1, mcr4; - - /* - * Reset the state engines. - * NOTE: Avoid accidentally enabling the disabled channels. - */ - pci_read_config_byte (dev, 0x50, &mcr1); - pci_read_config_byte (dev, 0x54, &mcr4); - pci_write_config_byte(dev, 0x50, (mcr1 | 0x32)); - pci_write_config_byte(dev, 0x54, (mcr4 | 0x32)); - udelay(100); - } - - /* - * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in - * the MISC. register to stretch the UltraDMA Tss timing. - * NOTE: This register is only writeable via I/O space. - */ - if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ) - outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c); - - hpt3xx_disable_fast_irq(dev, 0x50); - hpt3xx_disable_fast_irq(dev, 0x54); - - return dev->irq; -} - -static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct hpt_info *info = hpt3xx_get_info(hwif->dev); - u8 chip_type = info->chip_type; - u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; - - /* - * The HPT37x uses the CBLID pins as outputs for MA15/MA16 - * address lines to access an external EEPROM. To read valid - * cable detect state the pins must be enabled as inputs. - */ - if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { - /* - * HPT374 PCI function 1 - * - set bit 15 of reg 0x52 to enable TCBLID as input - * - set bit 15 of reg 0x56 to enable FCBLID as input - */ - u8 mcr_addr = hwif->select_data + 2; - u16 mcr; - - pci_read_config_word(dev, mcr_addr, &mcr); - pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); - /* now read cable id register */ - pci_read_config_byte(dev, 0x5a, &scr1); - pci_write_config_word(dev, mcr_addr, mcr); - } else if (chip_type >= HPT370) { - /* - * HPT370/372 and 374 pcifn 0 - * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs - */ - u8 scr2 = 0; - - pci_read_config_byte(dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); - /* now read cable id register */ - pci_read_config_byte(dev, 0x5a, &scr1); - pci_write_config_byte(dev, 0x5b, scr2); - } else - pci_read_config_byte(dev, 0x5a, &scr1); - - return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; -} - -static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct hpt_info *info = hpt3xx_get_info(hwif->dev); - int serialize = HPT_SERIALIZE_IO; - u8 chip_type = info->chip_type; - - /* Cache the channel's MISC. control registers' offset */ - hwif->select_data = hwif->channel ? 0x54 : 0x50; - - /* - * HPT3xxN chips have some complications: - * - * - on 33 MHz PCI we must clock switch - * - on 66 MHz PCI we must NOT use the PCI clock - */ - if (chip_type >= HPT372N && info->dpll_clk && info->pci_clk < 66) { - /* - * Clock is shared between the channels, - * so we'll have to serialize them... :-( - */ - serialize = 1; - hwif->rw_disk = &hpt3xxn_rw_disk; - } - - /* Serialize access to this device if needed */ - if (serialize && hwif->mate) - hwif->serialized = hwif->mate->serialized = 1; -} - -static int __devinit init_dma_hpt366(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long flags, base = ide_pci_dma_base(hwif, d); - u8 dma_old, dma_new, masterdma = 0, slavedma = 0; - - if (base == 0) - return -1; - - hwif->dma_base = base; - - if (ide_pci_check_simplex(hwif, d) < 0) - return -1; - - if (ide_pci_set_master(dev, d->name) < 0) - return -1; - - dma_old = inb(base + 2); - - local_irq_save(flags); - - dma_new = dma_old; - pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma); - pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma); - - if (masterdma & 0x30) dma_new |= 0x20; - if ( slavedma & 0x30) dma_new |= 0x40; - if (dma_new != dma_old) - outb(dma_new, base + 2); - - local_irq_restore(flags); - - printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", - hwif->name, base, base + 7); - - hwif->extra_base = base + (hwif->channel ? 8 : 16); - - if (ide_allocate_dma_engine(hwif)) - return -1; - - hwif->dma_ops = &sff_dma_ops; - - return 0; -} - -static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) -{ - if (dev2->irq != dev->irq) { - /* FIXME: we need a core pci_set_interrupt() */ - dev2->irq = dev->irq; - printk(KERN_INFO DRV_NAME " %s: PCI config space interrupt " - "fixed\n", pci_name(dev2)); - } -} - -static void __devinit hpt371_init(struct pci_dev *dev) -{ - u8 mcr1 = 0; - - /* - * HPT371 chips physically have only one channel, the secondary one, - * but the primary channel registers do exist! Go figure... - * So, we manually disable the non-existing channel here - * (if the BIOS hasn't done this already). - */ - pci_read_config_byte(dev, 0x50, &mcr1); - if (mcr1 & 0x04) - pci_write_config_byte(dev, 0x50, mcr1 & ~0x04); -} - -static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) -{ - u8 mcr1 = 0, pin1 = 0, pin2 = 0; - - /* - * Now we'll have to force both channels enabled if - * at least one of them has been enabled by BIOS... - */ - pci_read_config_byte(dev, 0x50, &mcr1); - if (mcr1 & 0x30) - pci_write_config_byte(dev, 0x50, mcr1 | 0x30); - - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1); - pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2); - - if (pin1 != pin2 && dev->irq == dev2->irq) { - printk(KERN_INFO DRV_NAME " %s: onboard version of chipset, " - "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2); - return 1; - } - - return 0; -} - -#define IDE_HFLAGS_HPT3XX \ - (IDE_HFLAG_NO_ATAPI_DMA | \ - IDE_HFLAG_OFF_BOARD) - -static const struct ide_port_ops hpt3xx_port_ops = { - .set_pio_mode = hpt3xx_set_pio_mode, - .set_dma_mode = hpt3xx_set_mode, - .quirkproc = hpt3xx_quirkproc, - .maskproc = hpt3xx_maskproc, - .mdma_filter = hpt3xx_mdma_filter, - .udma_filter = hpt3xx_udma_filter, - .cable_detect = hpt3xx_cable_detect, -}; - -static const struct ide_dma_ops hpt37x_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = hpt374_dma_end, - .dma_test_irq = hpt374_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_dma_ops hpt370_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = hpt370_dma_start, - .dma_end = hpt370_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = hpt370_dma_timeout, -}; - -static const struct ide_dma_ops hpt36x_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = ide_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = hpt366_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info hpt366_chipsets[] __devinitdata = { - { /* 0: HPT36x */ - .name = DRV_NAME, - .init_chipset = init_chipset_hpt366, - .init_hwif = init_hwif_hpt366, - .init_dma = init_dma_hpt366, - /* - * HPT36x chips have one channel per function and have - * both channel enable bits located differently and visible - * to both functions -- really stupid design decision... :-( - * Bit 4 is for the primary channel, bit 5 for the secondary. - */ - .enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}}, - .port_ops = &hpt3xx_port_ops, - .dma_ops = &hpt36x_dma_ops, - .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - }, - { /* 1: HPT3xx */ - .name = DRV_NAME, - .init_chipset = init_chipset_hpt366, - .init_hwif = init_hwif_hpt366, - .init_dma = init_dma_hpt366, - .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .port_ops = &hpt3xx_port_ops, - .dma_ops = &hpt37x_dma_ops, - .host_flags = IDE_HFLAGS_HPT3XX, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - } -}; - -/** - * hpt366_init_one - called when an HPT366 is found - * @dev: the hpt366 device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - */ -static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct hpt_info *info = NULL; - struct hpt_info *dyn_info; - struct pci_dev *dev2 = NULL; - struct ide_port_info d; - u8 idx = id->driver_data; - u8 rev = dev->revision; - int ret; - - if ((idx == 0 || idx == 4) && (PCI_FUNC(dev->devfn) & 1)) - return -ENODEV; - - switch (idx) { - case 0: - if (rev < 3) - info = &hpt36x; - else { - switch (min_t(u8, rev, 6)) { - case 3: info = &hpt370; break; - case 4: info = &hpt370a; break; - case 5: info = &hpt372; break; - case 6: info = &hpt372n; break; - } - idx++; - } - break; - case 1: - info = (rev > 1) ? &hpt372n : &hpt372a; - break; - case 2: - info = (rev > 1) ? &hpt302n : &hpt302; - break; - case 3: - hpt371_init(dev); - info = (rev > 1) ? &hpt371n : &hpt371; - break; - case 4: - info = &hpt374; - break; - case 5: - info = &hpt372n; - break; - } - - printk(KERN_INFO DRV_NAME ": %s chipset detected\n", info->chip_name); - - d = hpt366_chipsets[min_t(u8, idx, 1)]; - - d.udma_mask = info->udma_mask; - - /* fixup ->dma_ops for HPT370/HPT370A */ - if (info == &hpt370 || info == &hpt370a) - d.dma_ops = &hpt370_dma_ops; - - if (info == &hpt36x || info == &hpt374) - dev2 = pci_get_slot(dev->bus, dev->devfn + 1); - - dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL); - if (dyn_info == NULL) { - printk(KERN_ERR "%s %s: out of memory!\n", - d.name, pci_name(dev)); - pci_dev_put(dev2); - return -ENOMEM; - } - - /* - * Copy everything from a static "template" structure - * to just allocated per-chip hpt_info structure. - */ - memcpy(dyn_info, info, sizeof(*dyn_info)); - - if (dev2) { - memcpy(dyn_info + 1, info, sizeof(*dyn_info)); - - if (info == &hpt374) - hpt374_init(dev, dev2); - else { - if (hpt36x_init(dev, dev2)) - d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE; - } - - ret = ide_pci_init_two(dev, dev2, &d, dyn_info); - if (ret < 0) { - pci_dev_put(dev2); - kfree(dyn_info); - } - return ret; - } - - ret = ide_pci_init_one(dev, &d, dyn_info); - if (ret < 0) - kfree(dyn_info); - - return ret; -} - -static void __devexit hpt366_remove(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct ide_info *info = host->host_priv; - struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; - - ide_pci_remove(dev); - pci_dev_put(dev2); - kfree(info); -} - -static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = { - { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 }, - { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 }, - { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 }, - { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), 3 }, - { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT374), 4 }, - { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), 5 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl); - -static struct pci_driver hpt366_pci_driver = { - .name = "HPT366_IDE", - .id_table = hpt366_pci_tbl, - .probe = hpt366_init_one, - .remove = __devexit_p(hpt366_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init hpt366_ide_init(void) -{ - return ide_pci_register_driver(&hpt366_pci_driver); -} - -static void __exit hpt366_ide_exit(void) -{ - pci_unregister_driver(&hpt366_pci_driver); -} - -module_init(hpt366_ide_init); -module_exit(hpt366_ide_exit); - -MODULE_AUTHOR("Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c deleted file mode 100644 index 7c2feeb3c5e..00000000000 --- a/drivers/ide/pci/it8213.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * ITE 8213 IDE driver - * - * Copyright (C) 2006 Jack Lee - * Copyright (C) 2006 Alan Cox - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "it8213" - -/** - * it8213_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Set the interface PIO mode. - */ - -static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - int is_slave = drive->dn & 1; - int master_port = 0x40; - int slave_port = 0x44; - unsigned long flags; - u16 master_data; - u8 slave_data; - static DEFINE_SPINLOCK(tune_lock); - int control = 0; - - static const u8 timings[][2] = { - { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - spin_lock_irqsave(&tune_lock, flags); - pci_read_config_word(dev, master_port, &master_data); - - if (pio > 1) - control |= 1; /* Programmable timing on */ - if (drive->media != ide_disk) - control |= 4; /* ATAPI */ - if (pio > 2) - control |= 2; /* IORDY */ - if (is_slave) { - master_data |= 0x4000; - master_data &= ~0x0070; - if (pio > 1) - master_data = master_data | (control << 4); - pci_read_config_byte(dev, slave_port, &slave_data); - slave_data = slave_data & 0xf0; - slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1]; - } else { - master_data &= ~0x3307; - if (pio > 1) - master_data = master_data | control; - master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); - } - pci_write_config_word(dev, master_port, master_data); - if (is_slave) - pci_write_config_byte(dev, slave_port, slave_data); - spin_unlock_irqrestore(&tune_lock, flags); -} - -/** - * it8213_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Tune the ITE chipset for the DMA mode. - */ - -static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 maslave = 0x40; - int a_speed = 3 << (drive->dn * 4); - int u_flag = 1 << drive->dn; - int v_flag = 0x01 << drive->dn; - int w_flag = 0x10 << drive->dn; - int u_speed = 0; - u16 reg4042, reg4a; - u8 reg48, reg54, reg55; - - pci_read_config_word(dev, maslave, ®4042); - pci_read_config_byte(dev, 0x48, ®48); - pci_read_config_word(dev, 0x4a, ®4a); - pci_read_config_byte(dev, 0x54, ®54); - pci_read_config_byte(dev, 0x55, ®55); - - if (speed >= XFER_UDMA_0) { - u8 udma = speed - XFER_UDMA_0; - - u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4); - - if (!(reg48 & u_flag)) - pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed >= XFER_UDMA_5) - pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - else - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - - if ((reg4a & a_speed) != u_speed) - pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); - if (speed > XFER_UDMA_2) { - if (!(reg54 & v_flag)) - pci_write_config_byte(dev, 0x54, reg54 | v_flag); - } else - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - } else { - const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; - - if (reg48 & u_flag) - pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); - if (reg4a & a_speed) - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - if (reg54 & v_flag) - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - if (reg55 & w_flag) - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - - if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; - else - pio = 2; /* only SWDMA2 is allowed */ - - it8213_set_pio_mode(drive, pio); - } -} - -static u8 it8213_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 reg42h = 0; - - pci_read_config_byte(dev, 0x42, ®42h); - - return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; -} - -static const struct ide_port_ops it8213_port_ops = { - .set_pio_mode = it8213_set_pio_mode, - .set_dma_mode = it8213_set_dma_mode, - .cable_detect = it8213_cable_detect, -}; - -static const struct ide_port_info it8213_chipset __devinitdata = { - .name = DRV_NAME, - .enablebits = { {0x41, 0x80, 0x80} }, - .port_ops = &it8213_port_ops, - .host_flags = IDE_HFLAG_SINGLE, - .pio_mask = ATA_PIO4, - .swdma_mask = ATA_SWDMA2_ONLY, - .mwdma_mask = ATA_MWDMA12_ONLY, - .udma_mask = ATA_UDMA6, -}; - -/** - * it8213_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an ITE8213 controller. As - * this device follows the standard interfaces we can use the - * standard helper functions to do almost all the work for us. - */ - -static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &it8213_chipset, NULL); -} - -static const struct pci_device_id it8213_pci_tbl[] = { - { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), 0 }, - { 0, }, -}; - -MODULE_DEVICE_TABLE(pci, it8213_pci_tbl); - -static struct pci_driver it8213_pci_driver = { - .name = "ITE8213_IDE", - .id_table = it8213_pci_tbl, - .probe = it8213_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init it8213_ide_init(void) -{ - return ide_pci_register_driver(&it8213_pci_driver); -} - -static void __exit it8213_ide_exit(void) -{ - pci_unregister_driver(&it8213_pci_driver); -} - -module_init(it8213_ide_init); -module_exit(it8213_ide_exit); - -MODULE_AUTHOR("Jack Lee, Alan Cox"); -MODULE_DESCRIPTION("PCI driver module for the ITE 8213"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c deleted file mode 100644 index 995e18bb313..00000000000 --- a/drivers/ide/pci/it821x.c +++ /dev/null @@ -1,706 +0,0 @@ -/* - * Copyright (C) 2004 Red Hat <alan@redhat.com> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * - * May be copied or modified under the terms of the GNU General Public License - * Based in part on the ITE vendor provided SCSI driver. - * - * Documentation available from - * http://www.ite.com.tw/pc/IT8212F_V04.pdf - * Some other documents are NDA. - * - * The ITE8212 isn't exactly a standard IDE controller. It has two - * modes. In pass through mode then it is an IDE controller. In its smart - * mode its actually quite a capable hardware raid controller disguised - * as an IDE controller. Smart mode only understands DMA read/write and - * identify, none of the fancier commands apply. The IT8211 is identical - * in other respects but lacks the raid mode. - * - * Errata: - * o Rev 0x10 also requires master/slave hold the same DMA timings and - * cannot do ATAPI MWDMA. - * o The identify data for raid volumes lacks CHS info (technically ok) - * but also fails to set the LBA28 and other bits. We fix these in - * the IDE probe quirk code. - * o If you write LBA48 sized I/O's (ie > 256 sector) in smart mode - * raid then the controller firmware dies - * o Smart mode without RAID doesn't clear all the necessary identify - * bits to reduce the command set to the one used - * - * This has a few impacts on the driver - * - In pass through mode we do all the work you would expect - * - In smart mode the clocking set up is done by the controller generally - * but we must watch the other limits and filter. - * - There are a few extra vendor commands that actually talk to the - * controller but only work PIO with no IRQ. - * - * Vendor areas of the identify block in smart mode are used for the - * timing and policy set up. Each HDD in raid mode also has a serial - * block on the disk. The hardware extra commands are get/set chip status, - * rebuild, get rebuild status. - * - * In Linux the driver supports pass through mode as if the device was - * just another IDE controller. If the smart mode is running then - * volumes are managed by the controller firmware and each IDE "disk" - * is a raid volume. Even more cute - the controller can do automated - * hotplug and rebuild. - * - * The pass through controller itself is a little demented. It has a - * flaw that it has a single set of PIO/MWDMA timings per channel so - * non UDMA devices restrict each others performance. It also has a - * single clock source per channel so mixed UDMA100/133 performance - * isn't perfect and we have to pick a clock. Thankfully none of this - * matters in smart mode. ATAPI DMA is not currently supported. - * - * It seems the smart mode is a win for RAID1/RAID10 but otherwise not. - * - * TODO - * - ATAPI UDMA is ok but not MWDMA it seems - * - RAID configuration ioctls - * - Move to libata once it grows up - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "it821x" - -struct it821x_dev -{ - unsigned int smart:1, /* Are we in smart raid mode */ - timing10:1; /* Rev 0x10 */ - u8 clock_mode; /* 0, ATA_50 or ATA_66 */ - u8 want[2][2]; /* Mode/Pri log for master slave */ - /* We need these for switching the clock when DMA goes on/off - The high byte is the 66Mhz timing */ - u16 pio[2]; /* Cached PIO values */ - u16 mwdma[2]; /* Cached MWDMA values */ - u16 udma[2]; /* Cached UDMA values (per drive) */ -}; - -#define ATA_66 0 -#define ATA_50 1 -#define ATA_ANY 2 - -#define UDMA_OFF 0 -#define MWDMA_OFF 0 - -/* - * We allow users to force the card into non raid mode without - * flashing the alternative BIOS. This is also necessary right now - * for embedded platforms that cannot run a PC BIOS but are using this - * device. - */ - -static int it8212_noraid; - -/** - * it821x_program - program the PIO/MWDMA registers - * @drive: drive to tune - * @timing: timing info - * - * Program the PIO/MWDMA timing for this channel according to the - * current clock. - */ - -static void it821x_program(ide_drive_t *drive, u16 timing) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int channel = hwif->channel; - u8 conf; - - /* Program PIO/MWDMA timing bits */ - if(itdev->clock_mode == ATA_66) - conf = timing >> 8; - else - conf = timing & 0xFF; - - pci_write_config_byte(dev, 0x54 + 4 * channel, conf); -} - -/** - * it821x_program_udma - program the UDMA registers - * @drive: drive to tune - * @timing: timing info - * - * Program the UDMA timing for this drive according to the - * current clock. - */ - -static void it821x_program_udma(ide_drive_t *drive, u16 timing) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int channel = hwif->channel; - u8 unit = drive->dn & 1, conf; - - /* Program UDMA timing bits */ - if(itdev->clock_mode == ATA_66) - conf = timing >> 8; - else - conf = timing & 0xFF; - - if (itdev->timing10 == 0) - pci_write_config_byte(dev, 0x56 + 4 * channel + unit, conf); - else { - pci_write_config_byte(dev, 0x56 + 4 * channel, conf); - pci_write_config_byte(dev, 0x56 + 4 * channel + 1, conf); - } -} - -/** - * it821x_clock_strategy - * @drive: drive to set up - * - * Select between the 50 and 66Mhz base clocks to get the best - * results for this interface. - */ - -static void it821x_clock_strategy(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - ide_drive_t *pair; - int clock, altclock, sel = 0; - u8 unit = drive->dn & 1, v; - - pair = &hwif->drives[1 - unit]; - - if(itdev->want[0][0] > itdev->want[1][0]) { - clock = itdev->want[0][1]; - altclock = itdev->want[1][1]; - } else { - clock = itdev->want[1][1]; - altclock = itdev->want[0][1]; - } - - /* - * if both clocks can be used for the mode with the higher priority - * use the clock needed by the mode with the lower priority - */ - if (clock == ATA_ANY) - clock = altclock; - - /* Nobody cares - keep the same clock */ - if(clock == ATA_ANY) - return; - /* No change */ - if(clock == itdev->clock_mode) - return; - - /* Load this into the controller ? */ - if(clock == ATA_66) - itdev->clock_mode = ATA_66; - else { - itdev->clock_mode = ATA_50; - sel = 1; - } - - pci_read_config_byte(dev, 0x50, &v); - v &= ~(1 << (1 + hwif->channel)); - v |= sel << (1 + hwif->channel); - pci_write_config_byte(dev, 0x50, v); - - /* - * Reprogram the UDMA/PIO of the pair drive for the switch - * MWDMA will be dealt with by the dma switcher - */ - if(pair && itdev->udma[1-unit] != UDMA_OFF) { - it821x_program_udma(pair, itdev->udma[1-unit]); - it821x_program(pair, itdev->pio[1-unit]); - } - /* - * Reprogram the UDMA/PIO of our drive for the switch. - * MWDMA will be dealt with by the dma switcher - */ - if(itdev->udma[unit] != UDMA_OFF) { - it821x_program_udma(drive, itdev->udma[unit]); - it821x_program(drive, itdev->pio[unit]); - } -} - -/** - * it821x_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Tune the host to the desired PIO mode taking into the consideration - * the maximum PIO mode supported by the other device on the cable. - */ - -static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - ide_drive_t *pair; - u8 unit = drive->dn & 1, set_pio = pio; - - /* Spec says 89 ref driver uses 88 */ - static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 }; - static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY }; - - pair = &hwif->drives[1 - unit]; - - /* - * Compute the best PIO mode we can for a given device. We must - * pick a speed that does not cause problems with the other device - * on the cable. - */ - if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); - /* trim PIO to the slowest of the master/slave */ - if (pair_pio < set_pio) - set_pio = pair_pio; - } - - /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ - itdev->want[unit][1] = pio_want[set_pio]; - itdev->want[unit][0] = 1; /* PIO is lowest priority */ - itdev->pio[unit] = pio_timings[set_pio]; - it821x_clock_strategy(drive); - it821x_program(drive, itdev->pio[unit]); -} - -/** - * it821x_tune_mwdma - tune a channel for MWDMA - * @drive: drive to set up - * @mode_wanted: the target operating mode - * - * Load the timing settings for this device mode into the - * controller when doing MWDMA in pass through mode. The caller - * must manage the whole lack of per device MWDMA/PIO timings and - * the shared MWDMA/PIO timing register. - */ - -static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif); - u8 unit = drive->dn & 1, channel = hwif->channel, conf; - - static u16 dma[] = { 0x8866, 0x3222, 0x3121 }; - static u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY }; - - itdev->want[unit][1] = mwdma_want[mode_wanted]; - itdev->want[unit][0] = 2; /* MWDMA is low priority */ - itdev->mwdma[unit] = dma[mode_wanted]; - itdev->udma[unit] = UDMA_OFF; - - /* UDMA bits off - Revision 0x10 do them in pairs */ - pci_read_config_byte(dev, 0x50, &conf); - if (itdev->timing10) - conf |= channel ? 0x60: 0x18; - else - conf |= 1 << (3 + 2 * channel + unit); - pci_write_config_byte(dev, 0x50, conf); - - it821x_clock_strategy(drive); - /* FIXME: do we need to program this ? */ - /* it821x_program(drive, itdev->mwdma[unit]); */ -} - -/** - * it821x_tune_udma - tune a channel for UDMA - * @drive: drive to set up - * @mode_wanted: the target operating mode - * - * Load the timing settings for this device mode into the - * controller when doing UDMA modes in pass through. - */ - -static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - u8 unit = drive->dn & 1, channel = hwif->channel, conf; - - static u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 }; - static u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 }; - - itdev->want[unit][1] = udma_want[mode_wanted]; - itdev->want[unit][0] = 3; /* UDMA is high priority */ - itdev->mwdma[unit] = MWDMA_OFF; - itdev->udma[unit] = udma[mode_wanted]; - if(mode_wanted >= 5) - itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */ - - /* UDMA on. Again revision 0x10 must do the pair */ - pci_read_config_byte(dev, 0x50, &conf); - if (itdev->timing10) - conf &= channel ? 0x9F: 0xE7; - else - conf &= ~ (1 << (3 + 2 * channel + unit)); - pci_write_config_byte(dev, 0x50, conf); - - it821x_clock_strategy(drive); - it821x_program_udma(drive, itdev->udma[unit]); - -} - -/** - * it821x_dma_read - DMA hook - * @drive: drive for DMA - * - * The IT821x has a single timing register for MWDMA and for PIO - * operations. As we flip back and forth we have to reload the - * clock. In addition the rev 0x10 device only works if the same - * timing value is loaded into the master and slave UDMA clock - * so we must also reload that. - * - * FIXME: we could figure out in advance if we need to do reloads - */ - -static void it821x_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - u8 unit = drive->dn & 1; - - if(itdev->mwdma[unit] != MWDMA_OFF) - it821x_program(drive, itdev->mwdma[unit]); - else if(itdev->udma[unit] != UDMA_OFF && itdev->timing10) - it821x_program_udma(drive, itdev->udma[unit]); - ide_dma_start(drive); -} - -/** - * it821x_dma_write - DMA hook - * @drive: drive for DMA stop - * - * The IT821x has a single timing register for MWDMA and for PIO - * operations. As we flip back and forth we have to reload the - * clock. - */ - -static int it821x_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int ret = ide_dma_end(drive); - u8 unit = drive->dn & 1; - - if(itdev->mwdma[unit] != MWDMA_OFF) - it821x_program(drive, itdev->pio[unit]); - return ret; -} - -/** - * it821x_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Tune the ITE chipset for the desired DMA mode. - */ - -static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - /* - * MWDMA tuning is really hard because our MWDMA and PIO - * timings are kept in the same place. We can switch in the - * host dma on/off callbacks. - */ - if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_6) - it821x_tune_udma(drive, speed - XFER_UDMA_0); - else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) - it821x_tune_mwdma(drive, speed - XFER_MW_DMA_0); -} - -/** - * it821x_cable_detect - cable detection - * @hwif: interface to check - * - * Check for the presence of an ATA66 capable cable on the - * interface. Problematic as it seems some cards don't have - * the needed logic onboard. - */ - -static u8 it821x_cable_detect(ide_hwif_t *hwif) -{ - /* The reference driver also only does disk side */ - return ATA_CBL_PATA80; -} - -/** - * it821x_quirkproc - post init callback - * @drive: drive - * - * This callback is run after the drive has been probed but - * before anything gets attached. It allows drivers to do any - * final tuning that is needed, or fixups to work around bugs. - */ - -static void it821x_quirkproc(ide_drive_t *drive) -{ - struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif); - u16 *id = drive->id; - - if (!itdev->smart) { - /* - * If we are in pass through mode then not much - * needs to be done, but we do bother to clear the - * IRQ mask as we may well be in PIO (eg rev 0x10) - * for now and we know unmasking is safe on this chipset. - */ - drive->dev_flags |= IDE_DFLAG_UNMASK; - } else { - /* - * Perform fixups on smart mode. We need to "lose" some - * capabilities the firmware lacks but does not filter, and - * also patch up some capability bits that it forgets to set - * in RAID mode. - */ - - /* Check for RAID v native */ - if (strstr((char *)&id[ATA_ID_PROD], - "Integrated Technology Express")) { - /* In raid mode the ident block is slightly buggy - We need to set the bits so that the IDE layer knows - LBA28. LBA48 and DMA ar valid */ - id[ATA_ID_CAPABILITY] |= (3 << 8); /* LBA28, DMA */ - id[ATA_ID_COMMAND_SET_2] |= 0x0400; /* LBA48 valid */ - id[ATA_ID_CFS_ENABLE_2] |= 0x0400; /* LBA48 on */ - /* Reporting logic */ - printk(KERN_INFO "%s: IT8212 %sRAID %d volume", - drive->name, id[147] ? "Bootable " : "", - id[ATA_ID_CSFO]); - if (id[ATA_ID_CSFO] != 1) - printk(KERN_CONT "(%dK stripe)", id[146]); - printk(KERN_CONT ".\n"); - } else { - /* Non RAID volume. Fixups to stop the core code - doing unsupported things */ - id[ATA_ID_FIELD_VALID] &= 3; - id[ATA_ID_QUEUE_DEPTH] = 0; - id[ATA_ID_COMMAND_SET_1] = 0; - id[ATA_ID_COMMAND_SET_2] &= 0xC400; - id[ATA_ID_CFSSE] &= 0xC000; - id[ATA_ID_CFS_ENABLE_1] = 0; - id[ATA_ID_CFS_ENABLE_2] &= 0xC400; - id[ATA_ID_CSF_DEFAULT] &= 0xC000; - id[127] = 0; - id[ATA_ID_DLF] = 0; - id[ATA_ID_CSFO] = 0; - id[ATA_ID_CFA_POWER] = 0; - printk(KERN_INFO "%s: Performing identify fixups.\n", - drive->name); - } - - /* - * Set MWDMA0 mode as enabled/support - just to tell - * IDE core that DMA is supported (it821x hardware - * takes care of DMA mode programming). - */ - if (ata_id_has_dma(id)) { - id[ATA_ID_MWDMA_MODES] |= 0x0101; - drive->current_speed = XFER_MW_DMA_0; - } - } - -} - -static struct ide_dma_ops it821x_pass_through_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = it821x_dma_start, - .dma_end = it821x_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, - .dma_lost_irq = ide_dma_lost_irq, -}; - -/** - * init_hwif_it821x - set up hwif structs - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The IT8212 - * requires several custom handlers so we override the default - * ide DMA handlers appropriately - */ - -static void __devinit init_hwif_it821x(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct it821x_dev *itdevs = host->host_priv; - struct it821x_dev *idev = itdevs + hwif->channel; - u8 conf; - - ide_set_hwifdata(hwif, idev); - - pci_read_config_byte(dev, 0x50, &conf); - if (conf & 1) { - idev->smart = 1; - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - /* Long I/O's although allowed in LBA48 space cause the - onboard firmware to enter the twighlight zone */ - hwif->rqsize = 256; - } - - /* Pull the current clocks from 0x50 also */ - if (conf & (1 << (1 + hwif->channel))) - idev->clock_mode = ATA_50; - else - idev->clock_mode = ATA_66; - - idev->want[0][1] = ATA_ANY; - idev->want[1][1] = ATA_ANY; - - /* - * Not in the docs but according to the reference driver - * this is necessary. - */ - - pci_read_config_byte(dev, 0x08, &conf); - if (conf == 0x10) { - idev->timing10 = 1; - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - if (idev->smart == 0) - printk(KERN_WARNING DRV_NAME " %s: revision 0x10, " - "workarounds activated\n", pci_name(dev)); - } - - if (idev->smart == 0) { - /* MWDMA/PIO clock switching for pass through mode */ - hwif->dma_ops = &it821x_pass_through_dma_ops; - } else - hwif->host_flags |= IDE_HFLAG_NO_SET_MODE; - - if (hwif->dma_base == 0) - return; - - hwif->ultra_mask = ATA_UDMA6; - hwif->mwdma_mask = ATA_MWDMA2; -} - -static void it8212_disable_raid(struct pci_dev *dev) -{ - /* Reset local CPU, and set BIOS not ready */ - pci_write_config_byte(dev, 0x5E, 0x01); - - /* Set to bypass mode, and reset PCI bus */ - pci_write_config_byte(dev, 0x50, 0x00); - pci_write_config_word(dev, PCI_COMMAND, - PCI_COMMAND_PARITY | PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - pci_write_config_word(dev, 0x40, 0xA0F3); - - pci_write_config_dword(dev,0x4C, 0x02040204); - pci_write_config_byte(dev, 0x42, 0x36); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); -} - -static unsigned int init_chipset_it821x(struct pci_dev *dev) -{ - u8 conf; - static char *mode[2] = { "pass through", "smart" }; - - /* Force the card into bypass mode if so requested */ - if (it8212_noraid) { - printk(KERN_INFO DRV_NAME " %s: forcing bypass mode\n", - pci_name(dev)); - it8212_disable_raid(dev); - } - pci_read_config_byte(dev, 0x50, &conf); - printk(KERN_INFO DRV_NAME " %s: controller in %s mode\n", - pci_name(dev), mode[conf & 1]); - return 0; -} - -static const struct ide_port_ops it821x_port_ops = { - /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */ - .set_pio_mode = it821x_set_pio_mode, - .set_dma_mode = it821x_set_dma_mode, - .quirkproc = it821x_quirkproc, - .cable_detect = it821x_cable_detect, -}; - -static const struct ide_port_info it821x_chipset __devinitdata = { - .name = DRV_NAME, - .init_chipset = init_chipset_it821x, - .init_hwif = init_hwif_it821x, - .port_ops = &it821x_port_ops, - .pio_mask = ATA_PIO4, -}; - -/** - * it821x_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an ITE821x controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct it821x_dev *itdevs; - int rc; - - itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL); - if (itdevs == NULL) { - printk(KERN_ERR DRV_NAME " %s: out of memory\n", pci_name(dev)); - return -ENOMEM; - } - - rc = ide_pci_init_one(dev, &it821x_chipset, itdevs); - if (rc) - kfree(itdevs); - - return rc; -} - -static void __devexit it821x_remove(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct it821x_dev *itdevs = host->host_priv; - - ide_pci_remove(dev); - kfree(itdevs); -} - -static const struct pci_device_id it821x_pci_tbl[] = { - { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 }, - { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 }, - { 0, }, -}; - -MODULE_DEVICE_TABLE(pci, it821x_pci_tbl); - -static struct pci_driver it821x_pci_driver = { - .name = "ITE821x IDE", - .id_table = it821x_pci_tbl, - .probe = it821x_init_one, - .remove = __devexit_p(it821x_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init it821x_ide_init(void) -{ - return ide_pci_register_driver(&it821x_pci_driver); -} - -static void __exit it821x_ide_exit(void) -{ - pci_unregister_driver(&it821x_pci_driver); -} - -module_init(it821x_ide_init); -module_exit(it821x_ide_exit); - -module_param_named(noraid, it8212_noraid, int, S_IRUGO); -MODULE_PARM_DESC(noraid, "Force card into bypass mode"); - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("PCI driver module for the ITE 821x"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c deleted file mode 100644 index 9a68433cf46..00000000000 --- a/drivers/ide/pci/jmicron.c +++ /dev/null @@ -1,176 +0,0 @@ - -/* - * Copyright (C) 2006 Red Hat <alan@redhat.com> - * - * May be copied or modified under the terms of the GNU General Public License - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "jmicron" - -typedef enum { - PORT_PATA0 = 0, - PORT_PATA1 = 1, - PORT_SATA = 2, -} port_type; - -/** - * jmicron_cable_detect - cable detection - * @hwif: IDE port - * - * Returns the cable type. - */ - -static u8 jmicron_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *pdev = to_pci_dev(hwif->dev); - - u32 control; - u32 control5; - - int port = hwif->channel; - port_type port_map[2]; - - pci_read_config_dword(pdev, 0x40, &control); - - /* There are two basic mappings. One has the two SATA ports merged - as master/slave and the secondary as PATA, the other has only the - SATA port mapped */ - if (control & (1 << 23)) { - port_map[0] = PORT_SATA; - port_map[1] = PORT_PATA0; - } else { - port_map[0] = PORT_SATA; - port_map[1] = PORT_SATA; - } - - /* The 365/366 may have this bit set to map the second PATA port - as the internal primary channel */ - pci_read_config_dword(pdev, 0x80, &control5); - if (control5 & (1<<24)) - port_map[0] = PORT_PATA1; - - /* The two ports may then be logically swapped by the firmware */ - if (control & (1 << 22)) - port = port ^ 1; - - /* - * Now we know which physical port we are talking about we can - * actually do our cable checking etc. Thankfully we don't need - * to do the plumbing for other cases. - */ - switch (port_map[port]) { - case PORT_PATA0: - if (control & (1 << 3)) /* 40/80 pin primary */ - return ATA_CBL_PATA40; - return ATA_CBL_PATA80; - case PORT_PATA1: - if (control5 & (1 << 19)) /* 40/80 pin secondary */ - return ATA_CBL_PATA40; - return ATA_CBL_PATA80; - case PORT_SATA: - break; - } - /* Avoid bogus "control reaches end of non-void function" */ - return ATA_CBL_PATA80; -} - -static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ -} - -/** - * jmicron_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @mode: DMA mode - * - * As the JMicron snoops for timings we don't need to do anything here. - */ - -static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ -} - -static const struct ide_port_ops jmicron_port_ops = { - .set_pio_mode = jmicron_set_pio_mode, - .set_dma_mode = jmicron_set_dma_mode, - .cable_detect = jmicron_cable_detect, -}; - -static const struct ide_port_info jmicron_chipset __devinitdata = { - .name = DRV_NAME, - .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, - .port_ops = &jmicron_port_ops, - .pio_mask = ATA_PIO5, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA6, -}; - -/** - * jmicron_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds a Jmicron controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &jmicron_chipset, NULL); -} - -/* All JMB PATA controllers have and will continue to have the same - * interface. Matching vendor and device class is enough for all - * current and future controllers if the controller is programmed - * properly. - * - * If libata is configured, jmicron PCI quirk programs the controller - * into the correct mode. If libata isn't configured, match known - * device IDs too to maintain backward compatibility. - */ -static struct pci_device_id jmicron_pci_tbl[] = { -#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE) - { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) }, - { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) }, - { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) }, - { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) }, - { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) }, -#endif - { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 }, - { 0, }, -}; - -MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl); - -static struct pci_driver jmicron_pci_driver = { - .name = "JMicron IDE", - .id_table = jmicron_pci_tbl, - .probe = jmicron_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init jmicron_ide_init(void) -{ - return ide_pci_register_driver(&jmicron_pci_driver); -} - -static void __exit jmicron_ide_exit(void) -{ - pci_unregister_driver(&jmicron_pci_driver); -} - -module_init(jmicron_ide_init); -module_exit(jmicron_ide_exit); - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("PCI driver module for the JMicron in legacy modes"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c deleted file mode 100644 index 13789060f40..00000000000 --- a/drivers/ide/pci/ns87415.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com> - * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be> - * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org> - * - * Inspired by an earlier effort from David S. Miller <davem@redhat.com> - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "ns87415" - -#ifdef CONFIG_SUPERIO -/* SUPERIO 87560 is a PoS chip that NatSem denies exists. - * Unfortunately, it's built-in on all Astro-based PA-RISC workstations - * which use the integrated NS87514 cell for CD-ROM support. - * i.e we have to support for CD-ROM installs. - * See drivers/parisc/superio.c for more gory details. - */ -#include <asm/superio.h> - -#define SUPERIO_IDE_MAX_RETRIES 25 - -/* Because of a defect in Super I/O, all reads of the PCI DMA status - * registers, IDE status register and the IDE select register need to be - * retried - */ -static u8 superio_ide_inb (unsigned long port) -{ - u8 tmp; - int retries = SUPERIO_IDE_MAX_RETRIES; - - /* printk(" [ reading port 0x%x with retry ] ", port); */ - - do { - tmp = inb(port); - if (tmp == 0) - udelay(50); - } while (tmp == 0 && retries-- > 0); - - return tmp; -} - -static u8 superio_read_status(ide_hwif_t *hwif) -{ - return superio_ide_inb(hwif->io_ports.status_addr); -} - -static u8 superio_read_sff_dma_status(ide_hwif_t *hwif) -{ - return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS); -} - -static void superio_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = inw(io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = superio_ide_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = inb(io_ports->lbah_addr); - } -} - -static const struct ide_tp_ops superio_tp_ops = { - .exec_command = ide_exec_command, - .read_status = superio_read_status, - .read_altstatus = ide_read_altstatus, - .read_sff_dma_status = superio_read_sff_dma_status, - - .set_irq = ide_set_irq, - - .tf_load = ide_tf_load, - .tf_read = superio_tf_read, - - .input_data = ide_input_data, - .output_data = ide_output_data, -}; - -static void __devinit superio_init_iops(struct hwif_s *hwif) -{ - struct pci_dev *pdev = to_pci_dev(hwif->dev); - u32 dma_stat; - u8 port = hwif->channel, tmp; - - dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa); - - /* Clear error/interrupt, enable dma */ - tmp = superio_ide_inb(dma_stat); - outb(tmp | 0x66, dma_stat); -} -#endif - -static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 }; - -/* - * This routine either enables/disables (according to IDE_DFLAG_PRESENT) - * the IRQ associated with the port (HWIF(drive)), - * and selects either PIO or DMA handshaking for the next I/O operation. - */ -static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data; - unsigned long flags; - - local_irq_save(flags); - new = *old; - - /* Adjust IRQ enable bit */ - bit = 1 << (8 + hwif->channel); - - if (drive->dev_flags & IDE_DFLAG_PRESENT) - new &= ~bit; - else - new |= bit; - - /* Select PIO or DMA, DMA may only be selected for one drive/channel. */ - bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1)); - other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1)); - new = use_dma ? ((new & ~other) | bit) : (new & ~bit); - - if (new != *old) { - unsigned char stat; - - /* - * Don't change DMA engine settings while Write Buffers - * are busy. - */ - (void) pci_read_config_byte(dev, 0x43, &stat); - while (stat & 0x03) { - udelay(1); - (void) pci_read_config_byte(dev, 0x43, &stat); - } - - *old = new; - (void) pci_write_config_dword(dev, 0x40, new); - - /* - * And let things settle... - */ - udelay(10); - } - - local_irq_restore(flags); -} - -static void ns87415_selectproc (ide_drive_t *drive) -{ - ns87415_prepare_drive(drive, - !!(drive->dev_flags & IDE_DFLAG_USING_DMA)); -} - -static int ns87415_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 dma_stat = 0, dma_cmd = 0; - - drive->waiting_for_dma = 0; - dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); - /* get DMA command mode */ - dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - /* stop DMA */ - outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); - /* from ERRATA: clear the INTR & ERROR bits */ - dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD); - /* and free any DMA resources */ - ide_destroy_dmatable(drive); - /* verify good DMA status */ - return (dma_stat & 7) != 4; -} - -static int ns87415_dma_setup(ide_drive_t *drive) -{ - /* select DMA xfer */ - ns87415_prepare_drive(drive, 1); - if (!ide_dma_setup(drive)) - return 0; - /* DMA failed: select PIO xfer */ - ns87415_prepare_drive(drive, 0); - return 1; -} - -static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned int ctrl, using_inta; - u8 progif; -#ifdef __sparc_v9__ - int timeout; - u8 stat; -#endif - - /* - * We cannot probe for IRQ: both ports share common IRQ on INTA. - * Also, leave IRQ masked during drive probing, to prevent infinite - * interrupts from a potentially floating INTA.. - * - * IRQs get unmasked in selectproc when drive is first used. - */ - (void) pci_read_config_dword(dev, 0x40, &ctrl); - (void) pci_read_config_byte(dev, 0x09, &progif); - /* is irq in "native" mode? */ - using_inta = progif & (1 << (hwif->channel << 1)); - if (!using_inta) - using_inta = ctrl & (1 << (4 + hwif->channel)); - if (hwif->mate) { - hwif->select_data = hwif->mate->select_data; - } else { - hwif->select_data = (unsigned long) - &ns87415_control[ns87415_count++]; - ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */ - if (using_inta) - ctrl &= ~(1 << 6); /* unmask INTA */ - *((unsigned int *)hwif->select_data) = ctrl; - (void) pci_write_config_dword(dev, 0x40, ctrl); - - /* - * Set prefetch size to 512 bytes for both ports, - * but don't turn on/off prefetching here. - */ - pci_write_config_byte(dev, 0x55, 0xee); - -#ifdef __sparc_v9__ - /* - * XXX: Reset the device, if we don't it will not respond to - * SELECT_DRIVE() properly during first ide_probe_port(). - */ - timeout = 10000; - outb(12, hwif->io_ports.ctl_addr); - udelay(10); - outb(8, hwif->io_ports.ctl_addr); - do { - udelay(50); - stat = hwif->tp_ops->read_status(hwif); - if (stat == 0xff) - break; - } while ((stat & ATA_BUSY) && --timeout); -#endif - } - - if (!using_inta) - hwif->irq = __ide_default_irq(hwif->io_ports.data_addr); - else if (!hwif->irq && hwif->mate && hwif->mate->irq) - hwif->irq = hwif->mate->irq; /* share IRQ with mate */ - - if (!hwif->dma_base) - return; - - outb(0x60, hwif->dma_base + ATA_DMA_STATUS); -} - -static const struct ide_port_ops ns87415_port_ops = { - .selectproc = ns87415_selectproc, -}; - -static const struct ide_dma_ops ns87415_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ns87415_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = ns87415_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info ns87415_chipset __devinitdata = { - .name = DRV_NAME, - .init_hwif = init_hwif_ns87415, - .port_ops = &ns87415_port_ops, - .dma_ops = &ns87415_dma_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_NO_ATAPI_DMA, -}; - -static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_port_info d = ns87415_chipset; - -#ifdef CONFIG_SUPERIO - if (PCI_SLOT(dev->devfn) == 0xE) { - /* Built-in - assume it's under superio. */ - d.init_iops = superio_init_iops; - d.tp_ops = &superio_tp_ops; - } -#endif - return ide_pci_init_one(dev, &d, NULL); -} - -static const struct pci_device_id ns87415_pci_tbl[] = { - { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl); - -static struct pci_driver ns87415_pci_driver = { - .name = "NS87415_IDE", - .id_table = ns87415_pci_tbl, - .probe = ns87415_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init ns87415_ide_init(void) -{ - return ide_pci_register_driver(&ns87415_pci_driver); -} - -static void __exit ns87415_ide_exit(void) -{ - pci_unregister_driver(&ns87415_pci_driver); -} - -module_init(ns87415_ide_init); -module_exit(ns87415_ide_exit); - -MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for NS87415 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c deleted file mode 100644 index 6048eda3cd6..00000000000 --- a/drivers/ide/pci/opti621.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Copyright (C) 1996-1998 Linus Torvalds & authors (see below) - */ - -/* - * Authors: - * Jaromir Koutek <miri@punknet.cz>, - * Jan Harkes <jaharkes@cwi.nl>, - * Mark Lord <mlord@pobox.com> - * Some parts of code are from ali14xx.c and from rz1000.c. - * - * OPTi is trademark of OPTi, Octek is trademark of Octek. - * - * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps - * and disassembled/traced setupvic.exe (DOS program). - * It increases kernel code about 2 kB. - * I don't have this card no more, but I hope I can get some in case - * of needed development. - * My card is Octek PIDE 1.01 (on card) or OPTiViC (program). - * It has a place for a secondary connector in circuit, but nothing - * is there. Also BIOS says no address for - * secondary controller (see bellow in ide_init_opti621). - * I've only tested this on my system, which only has one disk. - * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus - * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random - * lockups). I tried the OCTEK double speed CD-ROM and - * it does not work! But I can't boot DOS also, so it's probably - * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no - * problems) and Seagate 1GB (as slave, WD as master). My experiences - * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes - * it slows to about 100kB/s! I don't know why and I have - * not this drive now, so I can't try it again. - * I write this driver because I lost the paper ("manual") with - * settings of jumpers on the card and I have to boot Linux with - * Loadlin except LILO, cause I have to run the setupvic.exe program - * already or I get disk errors (my test: rpm -Vf - * /usr/X11R6/bin/XF86_SVGA - or any big file). - * Some numbers from hdparm -t /dev/hda: - * Timing buffer-cache reads: 32 MB in 3.02 seconds =10.60 MB/sec - * Timing buffered disk reads: 16 MB in 5.52 seconds = 2.90 MB/sec - * I have 4 Megs/s before, but I don't know why (maybe changes - * in hdparm test). - * After release of 0.1, I got some successful reports, so it might work. - * - * The main problem with OPTi is that some timings for master - * and slave must be the same. For example, if you have master - * PIO 3 and slave PIO 0, driver have to set some timings of - * master for PIO 0. Second problem is that opti621_set_pio_mode - * got only one drive to set, but have to set both drives. - * This is solved in compute_pios. If you don't set - * the second drive, compute_pios use ide_get_best_pio_mode - * for autoselect mode (you can change it to PIO 0, if you want). - * If you then set the second drive to another PIO, the old value - * (automatically selected) will be overrided by yours. - * There is a 25/33MHz switch in configuration - * register, but driver is written for use at any frequency. - * - * Version 0.1, Nov 8, 1996 - * by Jaromir Koutek, for 2.1.8. - * Initial version of driver. - * - * Version 0.2 - * Number 0.2 skipped. - * - * Version 0.3, Nov 29, 1997 - * by Mark Lord (probably), for 2.1.68 - * Updates for use with new IDE block driver. - * - * Version 0.4, Dec 14, 1997 - * by Jan Harkes - * Fixed some errors and cleaned the code. - * - * Version 0.5, Jan 2, 1998 - * by Jaromir Koutek - * Updates for use with (again) new IDE block driver. - * Update of documentation. - * - * Version 0.6, Jan 2, 1999 - * by Jaromir Koutek - * Reversed to version 0.3 of the driver, because - * 0.5 doesn't work. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> - -#include <asm/io.h> - -#define DRV_NAME "opti621" - -#define READ_REG 0 /* index of Read cycle timing register */ -#define WRITE_REG 1 /* index of Write cycle timing register */ -#define CNTRL_REG 3 /* index of Control register */ -#define STRAP_REG 5 /* index of Strap register */ -#define MISC_REG 6 /* index of Miscellaneous register */ - -static int reg_base; - -static DEFINE_SPINLOCK(opti621_lock); - -/* Write value to register reg, base of register - * is at reg_base (0x1f0 primary, 0x170 secondary, - * if not changed by PCI configuration). - * This is from setupvic.exe program. - */ -static void write_reg(u8 value, int reg) -{ - inw(reg_base + 1); - inw(reg_base + 1); - outb(3, reg_base + 2); - outb(value, reg_base + reg); - outb(0x83, reg_base + 2); -} - -/* Read value from register reg, base of register - * is at reg_base (0x1f0 primary, 0x170 secondary, - * if not changed by PCI configuration). - * This is from setupvic.exe program. - */ -static u8 read_reg(int reg) -{ - u8 ret = 0; - - inw(reg_base + 1); - inw(reg_base + 1); - outb(3, reg_base + 2); - ret = inb(reg_base + reg); - outb(0x83, reg_base + 2); - - return ret; -} - -static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - ide_drive_t *pair = ide_get_pair_dev(drive); - unsigned long flags; - u8 tim, misc, addr_pio = pio, clk; - - /* DRDY is default 2 (by OPTi Databook) */ - static const u8 addr_timings[2][5] = { - { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */ - { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */ - }; - static const u8 data_rec_timings[2][5] = { - { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */ - { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ - }; - - drive->drive_data = XFER_PIO_0 + pio; - - if (pair) { - if (pair->drive_data && pair->drive_data < drive->drive_data) - addr_pio = pair->drive_data - XFER_PIO_0; - } - - spin_lock_irqsave(&opti621_lock, flags); - - reg_base = hwif->io_ports.data_addr; - - /* allow Register-B */ - outb(0xc0, reg_base + CNTRL_REG); - /* hmm, setupvic.exe does this ;-) */ - outb(0xff, reg_base + 5); - /* if reads 0xff, adapter not exist? */ - (void)inb(reg_base + CNTRL_REG); - /* if reads 0xc0, no interface exist? */ - read_reg(CNTRL_REG); - - /* check CLK speed */ - clk = read_reg(STRAP_REG) & 1; - - printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - - tim = data_rec_timings[clk][pio]; - misc = addr_timings[clk][addr_pio]; - - /* select Index-0/1 for Register-A/B */ - write_reg(drive->dn & 1, MISC_REG); - /* set read cycle timings */ - write_reg(tim, READ_REG); - /* set write cycle timings */ - write_reg(tim, WRITE_REG); - - /* use Register-A for drive 0 */ - /* use Register-B for drive 1 */ - write_reg(0x85, CNTRL_REG); - - /* set address setup, DRDY timings, */ - /* and read prefetch for both drives */ - write_reg(misc, MISC_REG); - - spin_unlock_irqrestore(&opti621_lock, flags); -} - -static const struct ide_port_ops opti621_port_ops = { - .set_pio_mode = opti621_set_pio_mode, -}; - -static const struct ide_port_info opti621_chipset __devinitdata = { - .name = DRV_NAME, - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_NO_DMA, - .pio_mask = ATA_PIO4, -}; - -static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &opti621_chipset, NULL); -} - -static const struct pci_device_id opti621_pci_tbl[] = { - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); - -static struct pci_driver opti621_pci_driver = { - .name = "Opti621_IDE", - .id_table = opti621_pci_tbl, - .probe = opti621_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init opti621_ide_init(void) -{ - return ide_pci_register_driver(&opti621_pci_driver); -} - -static void __exit opti621_ide_exit(void) -{ - pci_unregister_driver(&opti621_pci_driver); -} - -module_init(opti621_ide_init); -module_exit(opti621_ide_exit); - -MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord"); -MODULE_DESCRIPTION("PCI driver module for Opti621 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c deleted file mode 100644 index 211ae46e3e0..00000000000 --- a/drivers/ide/pci/pdc202xx_new.c +++ /dev/null @@ -1,588 +0,0 @@ -/* - * Promise TX2/TX4/TX2000/133 IDE driver - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Split from: - * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002 - * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2005-2007 MontaVista Software, Inc. - * Portions Copyright (C) 1999 Promise Technology, Inc. - * Author: Frank Tiernan (frankt@promise.com) - * Released under terms of General Public License - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> - -#ifdef CONFIG_PPC_PMAC -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#endif - -#define DRV_NAME "pdc202xx_new" - -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args) -#else -#define DBG(fmt, args...) -#endif - -static const char *pdc_quirk_drives[] = { - "QUANTUM FIREBALLlct08 08", - "QUANTUM FIREBALLP KA6.4", - "QUANTUM FIREBALLP KA9.1", - "QUANTUM FIREBALLP LM20.4", - "QUANTUM FIREBALLP KX13.6", - "QUANTUM FIREBALLP KX20.5", - "QUANTUM FIREBALLP KX27.3", - "QUANTUM FIREBALLP LM20.5", - NULL -}; - -static u8 max_dma_rate(struct pci_dev *pdev) -{ - u8 mode; - - switch(pdev->device) { - case PCI_DEVICE_ID_PROMISE_20277: - case PCI_DEVICE_ID_PROMISE_20276: - case PCI_DEVICE_ID_PROMISE_20275: - case PCI_DEVICE_ID_PROMISE_20271: - case PCI_DEVICE_ID_PROMISE_20269: - mode = 4; - break; - case PCI_DEVICE_ID_PROMISE_20270: - case PCI_DEVICE_ID_PROMISE_20268: - mode = 3; - break; - default: - return 0; - } - - return mode; -} - -/** - * get_indexed_reg - Get indexed register - * @hwif: for the port address - * @index: index of the indexed register - */ -static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) -{ - u8 value; - - outb(index, hwif->dma_base + 1); - value = inb(hwif->dma_base + 3); - - DBG("index[%02X] value[%02X]\n", index, value); - return value; -} - -/** - * set_indexed_reg - Set indexed register - * @hwif: for the port address - * @index: index of the indexed register - */ -static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value) -{ - outb(index, hwif->dma_base + 1); - outb(value, hwif->dma_base + 3); - DBG("index[%02X] value[%02X]\n", index, value); -} - -/* - * ATA Timing Tables based on 133 MHz PLL output clock. - * - * If the PLL outputs 100 MHz clock, the ASIC hardware will set - * the timing registers automatically when "set features" command is - * issued to the device. However, if the PLL output clock is 133 MHz, - * the following tables must be used. - */ -static struct pio_timing { - u8 reg0c, reg0d, reg13; -} pio_timings [] = { - { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */ - { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */ - { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */ - { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ - { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ -}; - -static struct mwdma_timing { - u8 reg0e, reg0f; -} mwdma_timings [] = { - { 0xdf, 0x5f }, /* MWDMA mode 0 */ - { 0x6b, 0x27 }, /* MWDMA mode 1 */ - { 0x69, 0x25 }, /* MWDMA mode 2 */ -}; - -static struct udma_timing { - u8 reg10, reg11, reg12; -} udma_timings [] = { - { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ - { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ - { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ - { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ - { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ - { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ - { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ -}; - -static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 adj = (drive->dn & 1) ? 0x08 : 0x00; - - /* - * IDE core issues SETFEATURES_XFER to the drive first (thanks to - * IDE_HFLAG_POST_SET_MODE in ->host_flags). PDC202xx hardware will - * automatically set the timing registers based on 100 MHz PLL output. - * - * As we set up the PLL to output 133 MHz for UltraDMA/133 capable - * chips, we must override the default register settings... - */ - if (max_dma_rate(dev) == 4) { - u8 mode = speed & 0x07; - - if (speed >= XFER_UDMA_0) { - set_indexed_reg(hwif, 0x10 + adj, - udma_timings[mode].reg10); - set_indexed_reg(hwif, 0x11 + adj, - udma_timings[mode].reg11); - set_indexed_reg(hwif, 0x12 + adj, - udma_timings[mode].reg12); - } else { - set_indexed_reg(hwif, 0x0e + adj, - mwdma_timings[mode].reg0e); - set_indexed_reg(hwif, 0x0f + adj, - mwdma_timings[mode].reg0f); - } - } else if (speed == XFER_UDMA_2) { - /* Set tHOLD bit to 0 if using UDMA mode 2 */ - u8 tmp = get_indexed_reg(hwif, 0x10 + adj); - - set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f); - } -} - -static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 adj = (drive->dn & 1) ? 0x08 : 0x00; - - if (max_dma_rate(dev) == 4) { - set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); - set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d); - set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13); - } -} - -static u8 pdcnew_cable_detect(ide_hwif_t *hwif) -{ - if (get_indexed_reg(hwif, 0x0b) & 0x04) - return ATA_CBL_PATA40; - else - return ATA_CBL_PATA80; -} - -static void pdcnew_quirkproc(ide_drive_t *drive) -{ - const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; - - for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(m, *list) != NULL) { - drive->quirk_list = 2; - return; - } - - drive->quirk_list = 0; -} - -static void pdcnew_reset(ide_drive_t *drive) -{ - /* - * Deleted this because it is redundant from the caller. - */ - printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n", - HWIF(drive)->channel ? "Secondary" : "Primary"); -} - -/** - * read_counter - Read the byte count registers - * @dma_base: for the port address - */ -static long read_counter(u32 dma_base) -{ - u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08; - u8 cnt0, cnt1, cnt2, cnt3; - long count = 0, last; - int retry = 3; - - do { - last = count; - - /* Read the current count */ - outb(0x20, pri_dma_base + 0x01); - cnt0 = inb(pri_dma_base + 0x03); - outb(0x21, pri_dma_base + 0x01); - cnt1 = inb(pri_dma_base + 0x03); - outb(0x20, sec_dma_base + 0x01); - cnt2 = inb(sec_dma_base + 0x03); - outb(0x21, sec_dma_base + 0x01); - cnt3 = inb(sec_dma_base + 0x03); - - count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0; - - /* - * The 30-bit decrementing counter is read in 4 pieces. - * Incorrect value may be read when the most significant bytes - * are changing... - */ - } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count)); - - DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n", - cnt0, cnt1, cnt2, cnt3); - - return count; -} - -/** - * detect_pll_input_clock - Detect the PLL input clock in Hz. - * @dma_base: for the port address - * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock. - */ -static long detect_pll_input_clock(unsigned long dma_base) -{ - struct timeval start_time, end_time; - long start_count, end_count; - long pll_input, usec_elapsed; - u8 scr1; - - start_count = read_counter(dma_base); - do_gettimeofday(&start_time); - - /* Start the test mode */ - outb(0x01, dma_base + 0x01); - scr1 = inb(dma_base + 0x03); - DBG("scr1[%02X]\n", scr1); - outb(scr1 | 0x40, dma_base + 0x03); - - /* Let the counter run for 10 ms. */ - mdelay(10); - - end_count = read_counter(dma_base); - do_gettimeofday(&end_time); - - /* Stop the test mode */ - outb(0x01, dma_base + 0x01); - scr1 = inb(dma_base + 0x03); - DBG("scr1[%02X]\n", scr1); - outb(scr1 & ~0x40, dma_base + 0x03); - - /* - * Calculate the input clock in Hz - * (the clock counter is 30 bit wide and counts down) - */ - usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + - (end_time.tv_usec - start_time.tv_usec); - pll_input = ((start_count - end_count) & 0x3fffffff) / 10 * - (10000000 / usec_elapsed); - - DBG("start[%ld] end[%ld]\n", start_count, end_count); - - return pll_input; -} - -#ifdef CONFIG_PPC_PMAC -static void apple_kiwi_init(struct pci_dev *pdev) -{ - struct device_node *np = pci_device_to_OF_node(pdev); - u8 conf; - - if (np == NULL || !of_device_is_compatible(np, "kiwi-root")) - return; - - if (pdev->revision >= 0x03) { - /* Setup chip magic config stuff (from darwin) */ - pci_read_config_byte (pdev, 0x40, &conf); - pci_write_config_byte(pdev, 0x40, (conf | 0x01)); - } -} -#endif /* CONFIG_PPC_PMAC */ - -static unsigned int init_chipset_pdcnew(struct pci_dev *dev) -{ - const char *name = DRV_NAME; - unsigned long dma_base = pci_resource_start(dev, 4); - unsigned long sec_dma_base = dma_base + 0x08; - long pll_input, pll_output, ratio; - int f, r; - u8 pll_ctl0, pll_ctl1; - - if (dma_base == 0) - return -EFAULT; - -#ifdef CONFIG_PPC_PMAC - apple_kiwi_init(dev); -#endif - - /* Calculate the required PLL output frequency */ - switch(max_dma_rate(dev)) { - case 4: /* it's 133 MHz for Ultra133 chips */ - pll_output = 133333333; - break; - case 3: /* and 100 MHz for Ultra100 chips */ - default: - pll_output = 100000000; - break; - } - - /* - * Detect PLL input clock. - * On some systems, where PCI bus is running at non-standard clock rate - * (e.g. 25 or 40 MHz), we have to adjust the cycle time. - * PDC20268 and newer chips employ PLL circuit to help correct timing - * registers setting. - */ - pll_input = detect_pll_input_clock(dma_base); - printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n", - name, pci_name(dev), pll_input / 1000); - - /* Sanity check */ - if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) { - printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!" - "\n", name, pci_name(dev), pll_input); - goto out; - } - -#ifdef DEBUG - DBG("pll_output is %ld Hz\n", pll_output); - - /* Show the current clock value of PLL control register - * (maybe already configured by the BIOS) - */ - outb(0x02, sec_dma_base + 0x01); - pll_ctl0 = inb(sec_dma_base + 0x03); - outb(0x03, sec_dma_base + 0x01); - pll_ctl1 = inb(sec_dma_base + 0x03); - - DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); -#endif - - /* - * Calculate the ratio of F, R and NO - * POUT = (F + 2) / (( R + 2) * NO) - */ - ratio = pll_output / (pll_input / 1000); - if (ratio < 8600L) { /* 8.6x */ - /* Using NO = 0x01, R = 0x0d */ - r = 0x0d; - } else if (ratio < 12900L) { /* 12.9x */ - /* Using NO = 0x01, R = 0x08 */ - r = 0x08; - } else if (ratio < 16100L) { /* 16.1x */ - /* Using NO = 0x01, R = 0x06 */ - r = 0x06; - } else if (ratio < 64000L) { /* 64x */ - r = 0x00; - } else { - /* Invalid ratio */ - printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n", - name, pci_name(dev), ratio); - goto out; - } - - f = (ratio * (r + 2)) / 1000 - 2; - - DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio); - - if (unlikely(f < 0 || f > 127)) { - /* Invalid F */ - printk(KERN_ERR "%s %s: F[%d] invalid!\n", - name, pci_name(dev), f); - goto out; - } - - pll_ctl0 = (u8) f; - pll_ctl1 = (u8) r; - - DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); - - outb(0x02, sec_dma_base + 0x01); - outb(pll_ctl0, sec_dma_base + 0x03); - outb(0x03, sec_dma_base + 0x01); - outb(pll_ctl1, sec_dma_base + 0x03); - - /* Wait the PLL circuit to be stable */ - mdelay(30); - -#ifdef DEBUG - /* - * Show the current clock value of PLL control register - */ - outb(0x02, sec_dma_base + 0x01); - pll_ctl0 = inb(sec_dma_base + 0x03); - outb(0x03, sec_dma_base + 0x01); - pll_ctl1 = inb(sec_dma_base + 0x03); - - DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); -#endif - - out: - return dev->irq; -} - -static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) -{ - struct pci_dev *dev2; - - dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1, - PCI_FUNC(dev->devfn))); - - if (dev2 && - dev2->vendor == dev->vendor && - dev2->device == dev->device) { - - if (dev2->irq != dev->irq) { - dev2->irq = dev->irq; - printk(KERN_INFO DRV_NAME " %s: PCI config space " - "interrupt fixed\n", pci_name(dev)); - } - - return dev2; - } - - return NULL; -} - -static const struct ide_port_ops pdcnew_port_ops = { - .set_pio_mode = pdcnew_set_pio_mode, - .set_dma_mode = pdcnew_set_dma_mode, - .quirkproc = pdcnew_quirkproc, - .resetproc = pdcnew_reset, - .cable_detect = pdcnew_cable_detect, -}; - -#define DECLARE_PDCNEW_DEV(udma) \ - { \ - .name = DRV_NAME, \ - .init_chipset = init_chipset_pdcnew, \ - .port_ops = &pdcnew_port_ops, \ - .host_flags = IDE_HFLAG_POST_SET_MODE | \ - IDE_HFLAG_ERROR_STOPS_FIFO | \ - IDE_HFLAG_OFF_BOARD, \ - .pio_mask = ATA_PIO4, \ - .mwdma_mask = ATA_MWDMA2, \ - .udma_mask = udma, \ - } - -static const struct ide_port_info pdcnew_chipsets[] __devinitdata = { - /* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5), - /* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6), -}; - -/** - * pdc202new_init_one - called when a pdc202xx is found - * @dev: the pdc202new device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - */ - -static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data]; - struct pci_dev *bridge = dev->bus->self; - - if (dev->device == PCI_DEVICE_ID_PROMISE_20270 && bridge && - bridge->vendor == PCI_VENDOR_ID_DEC && - bridge->device == PCI_DEVICE_ID_DEC_21150) { - struct pci_dev *dev2; - - if (PCI_SLOT(dev->devfn) & 2) - return -ENODEV; - - dev2 = pdc20270_get_dev2(dev); - - if (dev2) { - int ret = ide_pci_init_two(dev, dev2, d, NULL); - if (ret < 0) - pci_dev_put(dev2); - return ret; - } - } - - if (dev->device == PCI_DEVICE_ID_PROMISE_20276 && bridge && - bridge->vendor == PCI_VENDOR_ID_INTEL && - (bridge->device == PCI_DEVICE_ID_INTEL_I960 || - bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { - printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller," - " skipping\n", pci_name(dev)); - return -ENODEV; - } - - return ide_pci_init_one(dev, d, NULL); -} - -static void __devexit pdc202new_remove(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; - - ide_pci_remove(dev); - pci_dev_put(dev2); -} - -static const struct pci_device_id pdc202new_pci_tbl[] = { - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 0 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 1 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 1 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 1 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 1 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl); - -static struct pci_driver pdc202new_pci_driver = { - .name = "Promise_IDE", - .id_table = pdc202new_pci_tbl, - .probe = pdc202new_init_one, - .remove = __devexit_p(pdc202new_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init pdc202new_ide_init(void) -{ - return ide_pci_register_driver(&pdc202new_pci_driver); -} - -static void __exit pdc202new_ide_exit(void) -{ - pci_unregister_driver(&pdc202new_pci_driver); -} - -module_init(pdc202new_ide_init); -module_exit(pdc202new_ide_exit); - -MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); -MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c deleted file mode 100644 index 799557c25ee..00000000000 --- a/drivers/ide/pci/pdc202xx_old.c +++ /dev/null @@ -1,453 +0,0 @@ -/* - * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2006-2007 MontaVista Software, Inc. - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * - * Portions Copyright (C) 1999 Promise Technology, Inc. - * Author: Frank Tiernan (frankt@promise.com) - * Released under terms of General Public License - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/blkdev.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> - -#define DRV_NAME "pdc202xx_old" - -#define PDC202XX_DEBUG_DRIVE_INFO 0 - -static const char *pdc_quirk_drives[] = { - "QUANTUM FIREBALLlct08 08", - "QUANTUM FIREBALLP KA6.4", - "QUANTUM FIREBALLP KA9.1", - "QUANTUM FIREBALLP LM20.4", - "QUANTUM FIREBALLP KX13.6", - "QUANTUM FIREBALLP KX20.5", - "QUANTUM FIREBALLP KX27.3", - "QUANTUM FIREBALLP LM20.5", - NULL -}; - -static void pdc_old_disable_66MHz_clock(ide_hwif_t *); - -static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 drive_pci = 0x60 + (drive->dn << 2); - - u8 AP = 0, BP = 0, CP = 0; - u8 TA = 0, TB = 0, TC = 0; - -#if PDC202XX_DEBUG_DRIVE_INFO - u32 drive_conf = 0; - pci_read_config_dword(dev, drive_pci, &drive_conf); -#endif - - /* - * TODO: do this once per channel - */ - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) - pdc_old_disable_66MHz_clock(hwif); - - pci_read_config_byte(dev, drive_pci, &AP); - pci_read_config_byte(dev, drive_pci + 1, &BP); - pci_read_config_byte(dev, drive_pci + 2, &CP); - - switch(speed) { - case XFER_UDMA_5: - case XFER_UDMA_4: TB = 0x20; TC = 0x01; break; - case XFER_UDMA_2: TB = 0x20; TC = 0x01; break; - case XFER_UDMA_3: - case XFER_UDMA_1: TB = 0x40; TC = 0x02; break; - case XFER_UDMA_0: - case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break; - case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break; - case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break; - case XFER_PIO_4: TA = 0x01; TB = 0x04; break; - case XFER_PIO_3: TA = 0x02; TB = 0x06; break; - case XFER_PIO_2: TA = 0x03; TB = 0x08; break; - case XFER_PIO_1: TA = 0x05; TB = 0x0C; break; - case XFER_PIO_0: - default: TA = 0x09; TB = 0x13; break; - } - - if (speed < XFER_SW_DMA_0) { - /* - * preserve SYNC_INT / ERDDY_EN bits while clearing - * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A - */ - AP &= ~0x3f; - if (ata_id_iordy_disable(drive->id)) - AP |= 0x20; /* set IORDY_EN bit */ - if (drive->media == ide_disk) - AP |= 0x10; /* set Prefetch_EN bit */ - /* clear PB[4:0] bits of register B */ - BP &= ~0x1f; - pci_write_config_byte(dev, drive_pci, AP | TA); - pci_write_config_byte(dev, drive_pci + 1, BP | TB); - } else { - /* clear MB[2:0] bits of register B */ - BP &= ~0xe0; - /* clear MC[3:0] bits of register C */ - CP &= ~0x0f; - pci_write_config_byte(dev, drive_pci + 1, BP | TB); - pci_write_config_byte(dev, drive_pci + 2, CP | TC); - } - -#if PDC202XX_DEBUG_DRIVE_INFO - printk(KERN_DEBUG "%s: %s drive%d 0x%08x ", - drive->name, ide_xfer_verbose(speed), - drive->dn, drive_conf); - pci_read_config_dword(dev, drive_pci, &drive_conf); - printk("0x%08x\n", drive_conf); -#endif -} - -static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - pdc202xx_set_mode(drive, XFER_PIO_0 + pio); -} - -static u8 pdc2026x_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10); - - pci_read_config_word(dev, 0x50, &CIS); - - return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; -} - -/* - * Set the control register to use the 66MHz system - * clock for UDMA 3/4/5 mode operation when necessary. - * - * FIXME: this register is shared by both channels, some locking is needed - * - * It may also be possible to leave the 66MHz clock on - * and readjust the timing parameters. - */ -static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif) -{ - unsigned long clock_reg = hwif->extra_base + 0x01; - u8 clock = inb(clock_reg); - - outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg); -} - -static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) -{ - unsigned long clock_reg = hwif->extra_base + 0x01; - u8 clock = inb(clock_reg); - - outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); -} - -static void pdc202xx_quirkproc(ide_drive_t *drive) -{ - const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; - - for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(m, *list) != NULL) { - drive->quirk_list = 2; - return; - } - - drive->quirk_list = 0; -} - -static void pdc202xx_dma_start(ide_drive_t *drive) -{ - if (drive->current_speed > XFER_UDMA_2) - pdc_old_enable_66MHz_clock(drive->hwif); - if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) { - struct request *rq = HWGROUP(drive)->rq; - ide_hwif_t *hwif = HWIF(drive); - unsigned long high_16 = hwif->extra_base - 16; - unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); - u32 word_count = 0; - u8 clock = inb(high_16 + 0x11); - - outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11); - word_count = (rq->nr_sectors << 8); - word_count = (rq_data_dir(rq) == READ) ? - word_count | 0x05000000 : - word_count | 0x06000000; - outl(word_count, atapi_reg); - } - ide_dma_start(drive); -} - -static int pdc202xx_dma_end(ide_drive_t *drive) -{ - if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) { - ide_hwif_t *hwif = HWIF(drive); - unsigned long high_16 = hwif->extra_base - 16; - unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); - u8 clock = 0; - - outl(0, atapi_reg); /* zero out extra */ - clock = inb(high_16 + 0x11); - outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11); - } - if (drive->current_speed > XFER_UDMA_2) - pdc_old_disable_66MHz_clock(drive->hwif); - return ide_dma_end(drive); -} - -static int pdc202xx_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long high_16 = hwif->extra_base - 16; - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - u8 sc1d = inb(high_16 + 0x001d); - - if (hwif->channel) { - /* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */ - if ((sc1d & 0x50) == 0x50) - goto somebody_else; - else if ((sc1d & 0x40) == 0x40) - return (dma_stat & 4) == 4; - } else { - /* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */ - if ((sc1d & 0x05) == 0x05) - goto somebody_else; - else if ((sc1d & 0x04) == 0x04) - return (dma_stat & 4) == 4; - } -somebody_else: - return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ -} - -static void pdc202xx_reset_host (ide_hwif_t *hwif) -{ - unsigned long high_16 = hwif->extra_base - 16; - u8 udma_speed_flag = inb(high_16 | 0x001f); - - outb(udma_speed_flag | 0x10, high_16 | 0x001f); - mdelay(100); - outb(udma_speed_flag & ~0x10, high_16 | 0x001f); - mdelay(2000); /* 2 seconds ?! */ - - printk(KERN_WARNING "PDC202XX: %s channel reset.\n", - hwif->channel ? "Secondary" : "Primary"); -} - -static void pdc202xx_reset (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - ide_hwif_t *mate = hwif->mate; - - pdc202xx_reset_host(hwif); - pdc202xx_reset_host(mate); - - ide_set_max_pio(drive); -} - -static void pdc202xx_dma_lost_irq(ide_drive_t *drive) -{ - pdc202xx_reset(drive); - ide_dma_lost_irq(drive); -} - -static void pdc202xx_dma_timeout(ide_drive_t *drive) -{ - pdc202xx_reset(drive); - ide_dma_timeout(drive); -} - -static unsigned int init_chipset_pdc202xx(struct pci_dev *dev) -{ - unsigned long dmabase = pci_resource_start(dev, 4); - u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; - - if (dmabase == 0) - goto out; - - udma_speed_flag = inb(dmabase | 0x1f); - primary_mode = inb(dmabase | 0x1a); - secondary_mode = inb(dmabase | 0x1b); - printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \ - "Primary %s Mode " \ - "Secondary %s Mode.\n", pci_name(dev), - (udma_speed_flag & 1) ? "EN" : "DIS", - (primary_mode & 1) ? "MASTER" : "PCI", - (secondary_mode & 1) ? "MASTER" : "PCI" ); - - if (!(udma_speed_flag & 1)) { - printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ", - pci_name(dev), udma_speed_flag, - (udma_speed_flag|1)); - outb(udma_speed_flag | 1, dmabase | 0x1f); - printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN"); - } -out: - return dev->irq; -} - -static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, - const char *name) -{ - if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) { - u8 irq = 0, irq2 = 0; - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); - /* 0xbc */ - pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2); - if (irq != irq2) { - pci_write_config_byte(dev, - (PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */ - printk(KERN_INFO "%s %s: PCI config space interrupt " - "mirror fixed\n", name, pci_name(dev)); - } - } -} - -#define IDE_HFLAGS_PDC202XX \ - (IDE_HFLAG_ERROR_STOPS_FIFO | \ - IDE_HFLAG_OFF_BOARD) - -static const struct ide_port_ops pdc20246_port_ops = { - .set_pio_mode = pdc202xx_set_pio_mode, - .set_dma_mode = pdc202xx_set_mode, - .quirkproc = pdc202xx_quirkproc, -}; - -static const struct ide_port_ops pdc2026x_port_ops = { - .set_pio_mode = pdc202xx_set_pio_mode, - .set_dma_mode = pdc202xx_set_mode, - .quirkproc = pdc202xx_quirkproc, - .resetproc = pdc202xx_reset, - .cable_detect = pdc2026x_cable_detect, -}; - -static const struct ide_dma_ops pdc20246_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = ide_dma_end, - .dma_test_irq = pdc202xx_dma_test_irq, - .dma_lost_irq = pdc202xx_dma_lost_irq, - .dma_timeout = pdc202xx_dma_timeout, -}; - -static const struct ide_dma_ops pdc2026x_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = pdc202xx_dma_start, - .dma_end = pdc202xx_dma_end, - .dma_test_irq = pdc202xx_dma_test_irq, - .dma_lost_irq = pdc202xx_dma_lost_irq, - .dma_timeout = pdc202xx_dma_timeout, -}; - -#define DECLARE_PDC2026X_DEV(udma, extra_flags) \ - { \ - .name = DRV_NAME, \ - .init_chipset = init_chipset_pdc202xx, \ - .port_ops = &pdc2026x_port_ops, \ - .dma_ops = &pdc2026x_dma_ops, \ - .host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \ - .pio_mask = ATA_PIO4, \ - .mwdma_mask = ATA_MWDMA2, \ - .udma_mask = udma, \ - } - -static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { - { /* 0: PDC20246 */ - .name = DRV_NAME, - .init_chipset = init_chipset_pdc202xx, - .port_ops = &pdc20246_port_ops, - .dma_ops = &pdc20246_dma_ops, - .host_flags = IDE_HFLAGS_PDC202XX, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, - }, - - /* 1: PDC2026{2,3} */ - DECLARE_PDC2026X_DEV(ATA_UDMA4, 0), - /* 2: PDC2026{5,7} */ - DECLARE_PDC2026X_DEV(ATA_UDMA5, IDE_HFLAG_RQSIZE_256), -}; - -/** - * pdc202xx_init_one - called when a PDC202xx is found - * @dev: the pdc202xx device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - */ - -static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct ide_port_info *d; - u8 idx = id->driver_data; - - d = &pdc202xx_chipsets[idx]; - - if (idx < 2) - pdc202ata4_fixup_irq(dev, d->name); - - if (dev->vendor == PCI_DEVICE_ID_PROMISE_20265) { - struct pci_dev *bridge = dev->bus->self; - - if (bridge && - bridge->vendor == PCI_VENDOR_ID_INTEL && - (bridge->device == PCI_DEVICE_ID_INTEL_I960 || - bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { - printk(KERN_INFO DRV_NAME " %s: skipping Promise " - "PDC20265 attached to I2O RAID controller\n", - pci_name(dev)); - return -ENODEV; - } - } - - return ide_pci_init_one(dev, d, NULL); -} - -static const struct pci_device_id pdc202xx_pci_tbl[] = { - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 }, - { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl); - -static struct pci_driver pdc202xx_pci_driver = { - .name = "Promise_Old_IDE", - .id_table = pdc202xx_pci_tbl, - .probe = pdc202xx_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init pdc202xx_ide_init(void) -{ - return ide_pci_register_driver(&pdc202xx_pci_driver); -} - -static void __exit pdc202xx_ide_exit(void) -{ - pci_unregister_driver(&pdc202xx_pci_driver); -} - -module_init(pdc202xx_ide_init); -module_exit(pdc202xx_ide_exit); - -MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); -MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c deleted file mode 100644 index d63f9fdca76..00000000000 --- a/drivers/ide/pci/piix.c +++ /dev/null @@ -1,480 +0,0 @@ -/* - * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> - * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> - * - * May be copied or modified under the terms of the GNU General Public License - * - * Documentation: - * - * Publically available from Intel web site. Errata documentation - * is also publically available. As an aide to anyone hacking on this - * driver the list of errata that are relevant is below.going back to - * PIIX4. Older device documentation is now a bit tricky to find. - * - * Errata of note: - * - * Unfixable - * PIIX4 errata #9 - Only on ultra obscure hw - * ICH3 errata #13 - Not observed to affect real hw - * by Intel - * - * Things we must deal with - * PIIX4 errata #10 - BM IDE hang with non UDMA - * (must stop/start dma to recover) - * 440MX errata #15 - As PIIX4 errata #10 - * PIIX4 errata #15 - Must not read control registers - * during a PIO transfer - * 440MX errata #13 - As PIIX4 errata #15 - * ICH2 errata #21 - DMA mode 0 doesn't work right - * ICH0/1 errata #55 - As ICH2 errata #21 - * ICH2 spec c #9 - Extra operations needed to handle - * drive hotswap [NOT YET SUPPORTED] - * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary - * and must be dword aligned - * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 - * - * Should have been BIOS fixed: - * 450NX: errata #19 - DMA hangs on old 450NX - * 450NX: errata #20 - DMA hangs on old 450NX - * 450NX: errata #25 - Corruption with DMA on old 450NX - * ICH3 errata #15 - IDE deadlock under high load - * (BIOS must set dev 31 fn 0 bit 23) - * ICH3 errata #18 - Don't use native mode - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "piix" - -static int no_piix_dma; - -/** - * piix_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Set the interface PIO mode based upon the settings done by AMI BIOS. - */ - -static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - int is_slave = drive->dn & 1; - int master_port = hwif->channel ? 0x42 : 0x40; - int slave_port = 0x44; - unsigned long flags; - u16 master_data; - u8 slave_data; - static DEFINE_SPINLOCK(tune_lock); - int control = 0; - - /* ISP RTC */ - static const u8 timings[][2]= { - { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - /* - * Master vs slave is synchronized above us but the slave register is - * shared by the two hwifs so the corner case of two slave timeouts in - * parallel must be locked. - */ - spin_lock_irqsave(&tune_lock, flags); - pci_read_config_word(dev, master_port, &master_data); - - if (pio > 1) - control |= 1; /* Programmable timing on */ - if (drive->media == ide_disk) - control |= 4; /* Prefetch, post write */ - if (pio > 2) - control |= 2; /* IORDY */ - if (is_slave) { - master_data |= 0x4000; - master_data &= ~0x0070; - if (pio > 1) { - /* Set PPE, IE and TIME */ - master_data |= control << 4; - } - pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= hwif->channel ? 0x0f : 0xf0; - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << - (hwif->channel ? 4 : 0); - } else { - master_data &= ~0x3307; - if (pio > 1) { - /* enable PPE, IE and TIME */ - master_data |= control; - } - master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); - } - pci_write_config_word(dev, master_port, master_data); - if (is_slave) - pci_write_config_byte(dev, slave_port, slave_data); - spin_unlock_irqrestore(&tune_lock, flags); -} - -/** - * piix_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Set a PIIX host controller to the desired DMA mode. This involves - * programming the right timing data into the PCI configuration space. - */ - -static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 maslave = hwif->channel ? 0x42 : 0x40; - int a_speed = 3 << (drive->dn * 4); - int u_flag = 1 << drive->dn; - int v_flag = 0x01 << drive->dn; - int w_flag = 0x10 << drive->dn; - int u_speed = 0; - int sitre; - u16 reg4042, reg4a; - u8 reg48, reg54, reg55; - - pci_read_config_word(dev, maslave, ®4042); - sitre = (reg4042 & 0x4000) ? 1 : 0; - pci_read_config_byte(dev, 0x48, ®48); - pci_read_config_word(dev, 0x4a, ®4a); - pci_read_config_byte(dev, 0x54, ®54); - pci_read_config_byte(dev, 0x55, ®55); - - if (speed >= XFER_UDMA_0) { - u8 udma = speed - XFER_UDMA_0; - - u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4); - - if (!(reg48 & u_flag)) - pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed == XFER_UDMA_5) { - pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - } else { - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - } - if ((reg4a & a_speed) != u_speed) - pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); - if (speed > XFER_UDMA_2) { - if (!(reg54 & v_flag)) - pci_write_config_byte(dev, 0x54, reg54 | v_flag); - } else - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - } else { - const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; - - if (reg48 & u_flag) - pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); - if (reg4a & a_speed) - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - if (reg54 & v_flag) - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - if (reg55 & w_flag) - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - - if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; - else - pio = 2; /* only SWDMA2 is allowed */ - - piix_set_pio_mode(drive, pio); - } -} - -/** - * init_chipset_ich - set up the ICH chipset - * @dev: PCI device to set up - * - * Initialize the PCI device as required. For the ICH this turns - * out to be nice and simple. - */ - -static unsigned int init_chipset_ich(struct pci_dev *dev) -{ - u32 extra = 0; - - pci_read_config_dword(dev, 0x54, &extra); - pci_write_config_dword(dev, 0x54, extra | 0x400); - - return 0; -} - -/** - * ich_clear_irq - clear BMDMA status - * @drive: IDE drive - * - * ICHx contollers set DMA INTR no matter DMA or PIO. - * BMDMA status might need to be cleared even for - * PIO interrupts to prevent spurious/lost IRQ. - */ -static void ich_clear_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 dma_stat; - - /* - * ide_dma_end() needs BMDMA status for error checking. - * So, skip clearing BMDMA status here and leave it - * to ide_dma_end() if this is DMA interrupt. - */ - if (drive->waiting_for_dma || hwif->dma_base == 0) - return; - - /* clear the INTR & ERROR bits */ - dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - /* Should we force the bit as well ? */ - outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS); -} - -struct ich_laptop { - u16 device; - u16 subvendor; - u16 subdevice; -}; - -/* - * List of laptops that use short cables rather than 80 wire - */ - -static const struct ich_laptop ich_laptop[] = { - /* devid, subvendor, subdev */ - { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */ - { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ - { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ - { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ - { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ - { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ - { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ - { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ - /* end marker */ - { 0, } -}; - -static u8 piix_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *pdev = to_pci_dev(hwif->dev); - const struct ich_laptop *lap = &ich_laptop[0]; - u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30; - - /* check for specials */ - while (lap->device) { - if (lap->device == pdev->device && - lap->subvendor == pdev->subsystem_vendor && - lap->subdevice == pdev->subsystem_device) { - return ATA_CBL_PATA40_SHORT; - } - lap++; - } - - pci_read_config_byte(pdev, 0x54, ®54h); - - return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; -} - -/** - * init_hwif_piix - fill in the hwif for the PIIX - * @hwif: IDE interface - * - * Set up the ide_hwif_t for the PIIX interface according to the - * capabilities of the hardware. - */ - -static void __devinit init_hwif_piix(ide_hwif_t *hwif) -{ - if (!hwif->dma_base) - return; - - if (no_piix_dma) - hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0; -} - -static const struct ide_port_ops piix_port_ops = { - .set_pio_mode = piix_set_pio_mode, - .set_dma_mode = piix_set_dma_mode, - .cable_detect = piix_cable_detect, -}; - -static const struct ide_port_ops ich_port_ops = { - .set_pio_mode = piix_set_pio_mode, - .set_dma_mode = piix_set_dma_mode, - .clear_irq = ich_clear_irq, - .cable_detect = piix_cable_detect, -}; - -#ifndef CONFIG_IA64 - #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS -#else - #define IDE_HFLAGS_PIIX 0 -#endif - -#define DECLARE_PIIX_DEV(udma) \ - { \ - .name = DRV_NAME, \ - .init_hwif = init_hwif_piix, \ - .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ - .port_ops = &piix_port_ops, \ - .host_flags = IDE_HFLAGS_PIIX, \ - .pio_mask = ATA_PIO4, \ - .swdma_mask = ATA_SWDMA2_ONLY, \ - .mwdma_mask = ATA_MWDMA12_ONLY, \ - .udma_mask = udma, \ - } - -#define DECLARE_ICH_DEV(udma) \ - { \ - .name = DRV_NAME, \ - .init_chipset = init_chipset_ich, \ - .init_hwif = init_hwif_piix, \ - .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ - .port_ops = &ich_port_ops, \ - .host_flags = IDE_HFLAGS_PIIX, \ - .pio_mask = ATA_PIO4, \ - .swdma_mask = ATA_SWDMA2_ONLY, \ - .mwdma_mask = ATA_MWDMA12_ONLY, \ - .udma_mask = udma, \ - } - -static const struct ide_port_info piix_pci_info[] __devinitdata = { - /* 0: MPIIX */ - { /* - * MPIIX actually has only a single IDE channel mapped to - * the primary or secondary ports depending on the value - * of the bit 14 of the IDETIM register at offset 0x6c - */ - .name = DRV_NAME, - .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}}, - .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA | - IDE_HFLAGS_PIIX, - .pio_mask = ATA_PIO4, - /* This is a painful system best to let it self tune for now */ - }, - /* 1: PIIXa/PIIXb/PIIX3 */ - DECLARE_PIIX_DEV(0x00), /* no udma */ - /* 2: PIIX4 */ - DECLARE_PIIX_DEV(ATA_UDMA2), - /* 3: ICH0 */ - DECLARE_ICH_DEV(ATA_UDMA2), - /* 4: ICH */ - DECLARE_ICH_DEV(ATA_UDMA4), - /* 5: PIIX4 */ - DECLARE_PIIX_DEV(ATA_UDMA4), - /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ - DECLARE_ICH_DEV(ATA_UDMA5), -}; - -/** - * piix_init_one - called when a PIIX is found - * @dev: the piix device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - */ - -static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL); -} - -/** - * piix_check_450nx - Check for problem 450NX setup - * - * Check for the present of 450NX errata #19 and errata #25. If - * they are found, disable use of DMA IDE - */ - -static void __devinit piix_check_450nx(void) -{ - struct pci_dev *pdev = NULL; - u16 cfg; - while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL) - { - /* Look for 450NX PXB. Check for problem configurations - A PCI quirk checks bit 6 already */ - pci_read_config_word(pdev, 0x41, &cfg); - /* Only on the original revision: IDE DMA can hang */ - if (pdev->revision == 0x00) - no_piix_dma = 1; - /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if (cfg & (1<<14) && pdev->revision < 5) - no_piix_dma = 2; - } - if(no_piix_dma) - printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n"); - if(no_piix_dma == 2) - printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n"); -} - -static const struct pci_device_id piix_pci_tbl[] = { - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0), 1 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1), 1 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), 0 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1), 1 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB), 2 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1), 3 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1), 2 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1), 4 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1), 5 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX), 2 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 6 }, -#ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1), 6 }, -#endif - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, piix_pci_tbl); - -static struct pci_driver piix_pci_driver = { - .name = "PIIX_IDE", - .id_table = piix_pci_tbl, - .probe = piix_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init piix_ide_init(void) -{ - piix_check_450nx(); - return ide_pci_register_driver(&piix_pci_driver); -} - -static void __exit piix_ide_exit(void) -{ - pci_unregister_driver(&piix_pci_driver); -} - -module_init(piix_ide_init); -module_exit(piix_ide_exit); - -MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz"); -MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c deleted file mode 100644 index 7daf0135cba..00000000000 --- a/drivers/ide/pci/rz1000.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 1995-1998 Linus Torvalds & author (see below) - */ - -/* - * Principal Author: mlord@pobox.com (Mark Lord) - * - * See linux/MAINTAINERS for address of current maintainer. - * - * This file provides support for disabling the buggy read-ahead - * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards. - * - * Dunno if this fixes both ports, or only the primary port (?). - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "rz1000" - -static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 reg; - - if (!pci_read_config_word (dev, 0x40, ®) && - !pci_write_config_word(dev, 0x40, reg & 0xdfff)) { - printk(KERN_INFO "%s: disabled chipset read-ahead " - "(buggy RZ1000/RZ1001)\n", hwif->name); - } else { - if (hwif->mate) - hwif->mate->serialized = hwif->serialized = 1; - hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS; - printk(KERN_INFO "%s: serialized, disabled unmasking " - "(buggy RZ1000/RZ1001)\n", hwif->name); - } -} - -static const struct ide_port_info rz1000_chipset __devinitdata = { - .name = DRV_NAME, - .init_hwif = init_hwif_rz1000, - .chipset = ide_rz1000, - .host_flags = IDE_HFLAG_NO_DMA, -}; - -static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &rz1000_chipset, NULL); -} - -static const struct pci_device_id rz1000_pci_tbl[] = { - { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), 0 }, - { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl); - -static struct pci_driver rz1000_pci_driver = { - .name = "RZ1000_IDE", - .id_table = rz1000_pci_tbl, - .probe = rz1000_init_one, - .remove = ide_pci_remove, -}; - -static int __init rz1000_ide_init(void) -{ - return ide_pci_register_driver(&rz1000_pci_driver); -} - -static void __exit rz1000_ide_exit(void) -{ - pci_unregister_driver(&rz1000_pci_driver); -} - -module_init(rz1000_ide_init); -module_exit(rz1000_ide_exit); - -MODULE_AUTHOR("Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c deleted file mode 100644 index f1a8758e3a9..00000000000 --- a/drivers/ide/pci/sc1200.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * - * May be copied or modified under the terms of the GNU General Public License - * - * Development of this chipset driver was funded - * by the nice folks at National Semiconductor. - * - * Documentation: - * Available from National Semiconductor - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> -#include <linux/pm.h> - -#include <asm/io.h> - -#define DRV_NAME "sc1200" - -#define SC1200_REV_A 0x00 -#define SC1200_REV_B1 0x01 -#define SC1200_REV_B3 0x02 -#define SC1200_REV_C1 0x03 -#define SC1200_REV_D1 0x04 - -#define PCI_CLK_33 0x00 -#define PCI_CLK_48 0x01 -#define PCI_CLK_66 0x02 -#define PCI_CLK_33A 0x03 - -static unsigned short sc1200_get_pci_clock (void) -{ - unsigned char chip_id, silicon_revision; - unsigned int pci_clock; - /* - * Check the silicon revision, as not all versions of the chip - * have the register with the fast PCI bus timings. - */ - chip_id = inb (0x903c); - silicon_revision = inb (0x903d); - - // Read the fast pci clock frequency - if (chip_id == 0x04 && silicon_revision < SC1200_REV_B1) { - pci_clock = PCI_CLK_33; - } else { - // check clock generator configuration (cfcc) - // the clock is in bits 8 and 9 of this word - - pci_clock = inw (0x901e); - pci_clock >>= 8; - pci_clock &= 0x03; - if (pci_clock == PCI_CLK_33A) - pci_clock = PCI_CLK_33; - } - return pci_clock; -} - -/* - * Here are the standard PIO mode 0-4 timings for each "format". - * Format-0 uses fast data reg timings, with slower command reg timings. - * Format-1 uses fast timings for all registers, but won't work with all drives. - */ -static const unsigned int sc1200_pio_timings[4][5] = - {{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz - {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz - {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz - {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}}; // format1, 66Mhz - -/* - * After chip reset, the PIO timings are set to 0x00009172, which is not valid. - */ -//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172) - -static void sc1200_tunepio(ide_drive_t *drive, u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *pdev = to_pci_dev(hwif->dev); - unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0; - - pci_read_config_dword(pdev, basereg + 4, &format); - format = (format >> 31) & 1; - if (format) - format += sc1200_get_pci_clock(); - pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3), - sc1200_pio_timings[format][pio]); -} - -/* - * The SC1200 specifies that two drives sharing a cable cannot mix - * UDMA/MDMA. It has to be one or the other, for the pair, though - * different timings can still be chosen for each drive. We could - * set the appropriate timing bits on the fly, but that might be - * a bit confusing. So, for now we statically handle this requirement - * by looking at our mate drive to see what it is capable of, before - * choosing a mode for our own drive. - */ -static u8 sc1200_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; - u8 mask = hwif->ultra_mask; - - if (mate == NULL) - goto out; - - if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { - if ((mateid[ATA_ID_FIELD_VALID] & 4) && - (mateid[ATA_ID_UDMA_MODES] & 7)) - goto out; - if ((mateid[ATA_ID_FIELD_VALID] & 2) && - (mateid[ATA_ID_MWDMA_MODES] & 7)) - mask = 0; - } -out: - return mask; -} - -static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned int reg, timings; - unsigned short pci_clock; - unsigned int basereg = hwif->channel ? 0x50 : 0x40; - - static const u32 udma_timing[3][3] = { - { 0x00921250, 0x00911140, 0x00911030 }, - { 0x00932470, 0x00922260, 0x00922140 }, - { 0x009436a1, 0x00933481, 0x00923261 }, - }; - - static const u32 mwdma_timing[3][3] = { - { 0x00077771, 0x00012121, 0x00002020 }, - { 0x000bbbb2, 0x00024241, 0x00013131 }, - { 0x000ffff3, 0x00035352, 0x00015151 }, - }; - - pci_clock = sc1200_get_pci_clock(); - - /* - * Note that each DMA mode has several timings associated with it. - * The correct timing depends on the fast PCI clock freq. - */ - - if (mode >= XFER_UDMA_0) - timings = udma_timing[pci_clock][mode - XFER_UDMA_0]; - else - timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0]; - - if ((drive->dn & 1) == 0) { - pci_read_config_dword(dev, basereg + 4, ®); - timings |= reg & 0x80000000; /* preserve PIO format bit */ - pci_write_config_dword(dev, basereg + 4, timings); - } else - pci_write_config_dword(dev, basereg + 12, timings); -} - -/* Replacement for the standard ide_dma_end action in - * dma_proc. - * - * returns 1 on error, 0 otherwise - */ -static int sc1200_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long dma_base = hwif->dma_base; - byte dma_stat; - - dma_stat = inb(dma_base+2); /* get DMA status */ - - if (!(dma_stat & 4)) - printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n", - dma_stat, ((dma_stat&7)!=4), ((dma_stat&2)==2)); - - outb(dma_stat|0x1b, dma_base+2); /* clear the INTR & ERROR bits */ - outb(inb(dma_base)&~1, dma_base); /* !! DO THIS HERE !! stop DMA */ - - drive->waiting_for_dma = 0; - ide_destroy_dmatable(drive); /* purge DMA mappings */ - - return (dma_stat & 7) != 4; /* verify good DMA status */ -} - -/* - * sc1200_set_pio_mode() handles setting of PIO modes - * for both the chipset and drive. - * - * All existing BIOSs for this chipset guarantee that all drives - * will have valid default PIO timings set up before we get here. - */ - -static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - int mode = -1; - - /* - * bad abuse of ->set_pio_mode interface - */ - switch (pio) { - case 200: mode = XFER_UDMA_0; break; - case 201: mode = XFER_UDMA_1; break; - case 202: mode = XFER_UDMA_2; break; - case 100: mode = XFER_MW_DMA_0; break; - case 101: mode = XFER_MW_DMA_1; break; - case 102: mode = XFER_MW_DMA_2; break; - } - if (mode != -1) { - printk("SC1200: %s: changing (U)DMA mode\n", drive->name); - ide_dma_off_quietly(drive); - if (ide_set_dma_mode(drive, mode) == 0 && - (drive->dev_flags & IDE_DFLAG_USING_DMA)) - hwif->dma_ops->dma_host_set(drive, 1); - return; - } - - sc1200_tunepio(drive, pio); -} - -#ifdef CONFIG_PM -struct sc1200_saved_state { - u32 regs[8]; -}; - -static int sc1200_suspend (struct pci_dev *dev, pm_message_t state) -{ - printk("SC1200: suspend(%u)\n", state.event); - - /* - * we only save state when going from full power to less - */ - if (state.event == PM_EVENT_ON) { - struct ide_host *host = pci_get_drvdata(dev); - struct sc1200_saved_state *ss = host->host_priv; - unsigned int r; - - /* - * save timing registers - * (this may be unnecessary if BIOS also does it) - */ - for (r = 0; r < 8; r++) - pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]); - } - - pci_disable_device(dev); - pci_set_power_state(dev, pci_choose_state(dev, state)); - return 0; -} - -static int sc1200_resume (struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct sc1200_saved_state *ss = host->host_priv; - unsigned int r; - int i; - - i = pci_enable_device(dev); - if (i) - return i; - - /* - * restore timing registers - * (this may be unnecessary if BIOS also does it) - */ - for (r = 0; r < 8; r++) - pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]); - - return 0; -} -#endif - -static const struct ide_port_ops sc1200_port_ops = { - .set_pio_mode = sc1200_set_pio_mode, - .set_dma_mode = sc1200_set_dma_mode, - .udma_filter = sc1200_udma_filter, -}; - -static const struct ide_dma_ops sc1200_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = sc1200_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info sc1200_chipset __devinitdata = { - .name = DRV_NAME, - .port_ops = &sc1200_port_ops, - .dma_ops = &sc1200_dma_ops, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_ABUSE_DMA_MODES, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, -}; - -static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct sc1200_saved_state *ss = NULL; - int rc; - -#ifdef CONFIG_PM - ss = kmalloc(sizeof(*ss), GFP_KERNEL); - if (ss == NULL) - return -ENOMEM; -#endif - rc = ide_pci_init_one(dev, &sc1200_chipset, ss); - if (rc) - kfree(ss); - - return rc; -} - -static const struct pci_device_id sc1200_pci_tbl[] = { - { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), 0}, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl); - -static struct pci_driver sc1200_pci_driver = { - .name = "SC1200_IDE", - .id_table = sc1200_pci_tbl, - .probe = sc1200_init_one, - .remove = ide_pci_remove, -#ifdef CONFIG_PM - .suspend = sc1200_suspend, - .resume = sc1200_resume, -#endif -}; - -static int __init sc1200_ide_init(void) -{ - return ide_pci_register_driver(&sc1200_pci_driver); -} - -static void __exit sc1200_ide_exit(void) -{ - pci_unregister_driver(&sc1200_pci_driver); -} - -module_init(sc1200_ide_init); -module_exit(sc1200_ide_exit); - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c deleted file mode 100644 index 9ce1d805992..00000000000 --- a/drivers/ide/pci/scc_pata.c +++ /dev/null @@ -1,970 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ide/pci/siimage.c: - * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -#define SCC_PATA_NAME "scc IDE" - -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - -#define ECMODE_VALUE 0x01 - -static struct scc_ports { - unsigned long ctl, dma; - struct ide_host *host; /* for removing port from system */ -} scc_ports[MAX_HWIFS]; - -/* PIO transfer mode table */ -/* JCHST */ -static unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - - -static u8 scc_ide_inb(unsigned long port) -{ - u32 data = in_be32((void*)port); - return (u8)data; -} - -static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - out_be32((void *)hwif->io_ports.command_addr, cmd); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static u8 scc_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.status_addr); -} - -static u8 scc_read_altstatus(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.ctl_addr); -} - -static u8 scc_read_sff_dma_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)(hwif->dma_base + 4)); -} - -static void scc_set_irq(ide_hwif_t *hwif, int on) -{ - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - - out_be32((void *)hwif->io_ports.ctl_addr, ctl); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static void scc_ide_insw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_insl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_outb(u8 addr, unsigned long port) -{ - out_be32((void*)port, addr); -} - -static void -scc_ide_outsw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -static void -scc_ide_outsl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -/** - * scc_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long piosht_port = ctl_base + 0x000; - unsigned long pioct_port = ctl_base + 0x004; - unsigned long reg; - int offset; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32((void __iomem *)piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32((void __iomem *)pioct_port, reg); -} - -/** - * scc_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long mdmact_port = ctl_base + 0x008; - unsigned long mcrcst_port = ctl_base + 0x00c; - unsigned long sdmact_port = ctl_base + 0x010; - unsigned long scrcst_port = ctl_base + 0x014; - unsigned long udenvt_port = ctl_base + 0x018; - unsigned long tdvhsel_port = ctl_base + 0x020; - int is_slave = (&hwif->drives[1] == drive); - int offset, idx; - unsigned long reg; - unsigned long jcactsel; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - - idx = speed - XFER_UDMA_0; - - jcactsel = JCACTSELtbl[offset][idx]; - if (is_slave) { - out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); - jcactsel = jcactsel << 2; - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); - } else { - out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); - } - reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; - out_be32((void __iomem *)udenvt_port, reg); -} - -static void scc_dma_host_set(ide_drive_t *drive, int on) -{ - ide_hwif_t *hwif = drive->hwif; - u8 unit = drive->dn & 1; - u8 dma_stat = scc_ide_inb(hwif->dma_base + 4); - - if (on) - dma_stat |= (1 << (5 + unit)); - else - dma_stat &= ~(1 << (5 + unit)); - - scc_ide_outb(dma_stat, hwif->dma_base + 4); -} - -/** - * scc_ide_dma_setup - begin a DMA phase - * @drive: target device - * - * Build an IDE DMA PRD (IDE speak for scatter gather table) - * and then set up the DMA transfer registers. - * - * Returns 0 on success. If a PIO fallback is required then 1 - * is returned. - */ - -static int scc_dma_setup(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq = HWGROUP(drive)->rq; - unsigned int reading; - u8 dma_stat; - - if (rq_data_dir(rq)) - reading = 0; - else - reading = 1 << 3; - - /* fall back to pio! */ - if (!ide_build_dmatable(drive, rq)) { - ide_map_sg(drive, rq); - return 1; - } - - /* PRD table */ - out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); - - /* specify r/w */ - out_be32((void __iomem *)hwif->dma_base, reading); - - /* read DMA status for INTR & ERROR flags */ - dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4)); - - /* clear INTR & ERROR flags */ - out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); - drive->waiting_for_dma = 1; - return 0; -} - -static void scc_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_cmd = scc_ide_inb(hwif->dma_base); - - /* start DMA */ - scc_ide_outb(dma_cmd | 1, hwif->dma_base); - wmb(); -} - -static int __scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_stat, dma_cmd; - - drive->waiting_for_dma = 0; - /* get DMA command mode */ - dma_cmd = scc_ide_inb(hwif->dma_base); - /* stop DMA */ - scc_ide_outb(dma_cmd & ~1, hwif->dma_base); - /* get DMA status */ - dma_stat = scc_ide_inb(hwif->dma_base + 4); - /* clear the INTR & ERROR bits */ - scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); - /* purge DMA mappings */ - ide_destroy_dmatable(drive); - /* verify good DMA status */ - wmb(); - return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; -} - -/** - * scc_dma_end - Stop DMA - * @drive: IDE drive - * - * Check and clear INT Status register. - * Then call __scc_dma_end(). - */ - -static int scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - void __iomem *dma_base = (void __iomem *)hwif->dma_base; - unsigned long intsts_port = hwif->dma_base + 0x014; - u32 reg; - int dma_stat, data_loss = 0; - static int retry = 0; - - /* errata A308 workaround: Step5 (check data loss) */ - /* We don't check non ide_disk because it is limited to UDMA4 */ - if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { - reg = in_be32((void __iomem *)intsts_port); - if (!(reg & INTSTS_ACTEINT)) { - printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", - drive->name); - data_loss = 1; - if (retry++) { - struct request *rq = HWGROUP(drive)->rq; - int unit; - /* ERROR_RESET and drive->crc_count are needed - * to reduce DMA transfer mode in retry process. - */ - if (rq) - rq->errors |= ERROR_RESET; - for (unit = 0; unit < MAX_DRIVES; unit++) { - ide_drive_t *drive = &hwif->drives[unit]; - drive->crc_count++; - } - } - } - } - - while (1) { - reg = in_be32((void __iomem *)intsts_port); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - unsigned long ctl_base = hwif->config_data; - - maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); - maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); - - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); - - out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - - printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); - - ide_do_reset(drive); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32((void __iomem *)intsts_port, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); - continue; - } - break; - } - - dma_stat = __scc_dma_end(drive); - if (data_loss) - dma_stat |= 2; /* emulate DMA error (to retry command) */ - return dma_stat; -} - -/* returns 1 if dma irq issued, 0 otherwise */ -static int scc_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); - - /* SCC errata A252,A308 workaround: Step4 */ - if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - (int_stat & INTSTS_INTRQ)) - return 1; - - /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ - if (int_stat & INTSTS_IOIRQS) - return 1; - - return 0; -} - -static u8 scc_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mask = hwif->ultra_mask; - - /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ - if ((drive->media != ide_disk) && (mask & 0xE0)) { - printk(KERN_INFO "%s: limit %s to UDMA4\n", - SCC_PATA_NAME, drive->name); - mask = ATA_UDMA4; - } - - return mask; -} - -/** - * setup_mmio_scc - map CTRL/BMID region - * @dev: PCI device we are configuring - * @name: device name - * - */ - -static int setup_mmio_scc (struct pci_dev *dev, const char *name) -{ - unsigned long ctl_base = pci_resource_start(dev, 0); - unsigned long dma_base = pci_resource_start(dev, 1); - unsigned long ctl_size = pci_resource_len(dev, 0); - unsigned long dma_size = pci_resource_len(dev, 1); - void __iomem *ctl_addr; - void __iomem *dma_addr; - int i, ret; - - for (i = 0; i < MAX_HWIFS; i++) { - if (scc_ports[i].ctl == 0) - break; - } - if (i >= MAX_HWIFS) - return -ENOMEM; - - ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); - if (ret < 0) { - printk(KERN_ERR "%s: can't reserve resources\n", name); - return ret; - } - - if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL) - goto fail_0; - - if ((dma_addr = ioremap(dma_base, dma_size)) == NULL) - goto fail_1; - - pci_set_master(dev); - scc_ports[i].ctl = (unsigned long)ctl_addr; - scc_ports[i].dma = (unsigned long)dma_addr; - pci_set_drvdata(dev, (void *) &scc_ports[i]); - - return 1; - - fail_1: - iounmap(ctl_addr); - fail_0: - return -ENOMEM; -} - -static int scc_ide_setup_pci_device(struct pci_dev *dev, - const struct ide_port_info *d) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - int i, rc; - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 8; i++) - hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; - hw.irq = dev->irq; - hw.dev = &dev->dev; - hw.chipset = ide_pci; - - rc = ide_host_add(d, hws, &host); - if (rc) - return rc; - - ports->host = host; - - return 0; -} - -/** - * init_setup_scc - set up an SCC PATA Controller - * @dev: PCI device - * @d: IDE port info - * - * Perform the initial set up for this device. - */ - -static int __devinit init_setup_scc(struct pci_dev *dev, - const struct ide_port_info *d) -{ - unsigned long ctl_base; - unsigned long dma_base; - unsigned long cckctrl_port; - unsigned long intmask_port; - unsigned long mode_port; - unsigned long ecmode_port; - unsigned long dma_status_port; - u32 reg = 0; - struct scc_ports *ports; - int rc; - - rc = pci_enable_device(dev); - if (rc) - goto end; - - rc = setup_mmio_scc(dev, d->name); - if (rc < 0) - goto end; - - ports = pci_get_drvdata(dev); - ctl_base = ports->ctl; - dma_base = ports->dma; - cckctrl_port = ctl_base + 0xff0; - intmask_port = dma_base + 0x010; - mode_port = ctl_base + 0x024; - ecmode_port = ctl_base + 0xf00; - dma_status_port = dma_base + 0x004; - - /* controller initialization */ - reg = 0; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32((void*)cckctrl_port, reg); - - for (;;) { - reg = in_be32((void*)cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32((void*)cckctrl_port, reg); - - out_be32((void*)ecmode_port, ECMODE_VALUE); - out_be32((void*)mode_port, MODE_JCUSFEN); - out_be32((void*)intmask_port, INTMASK_MSK); - - rc = scc_ide_setup_pci_device(dev, d); - - end: - return rc; -} - -static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) - out_be32((void *)io_ports->data_addr, - (tf->hob_data << 8) | tf->data); - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - scc_ide_outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - scc_ide_outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - scc_ide_outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - scc_ide_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} - -static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = (u16)in_be32((void *)io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = scc_ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = scc_ide_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = scc_ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); - } -} - -static void scc_input_data(ide_drive_t *drive, struct request *rq, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_insl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_insw(data_addr, buf, len / 2); -} - -static void scc_output_data(ide_drive_t *drive, struct request *rq, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_outsl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_outsw(data_addr, buf, len / 2); -} - -/** - * init_mmio_iops_scc - set up the iops for MMIO - * @hwif: interface to set up - * - */ - -static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct scc_ports *ports = pci_get_drvdata(dev); - unsigned long dma_base = ports->dma; - - ide_set_hwifdata(hwif, ports); - - hwif->dma_base = dma_base; - hwif->config_data = ports->ctl; -} - -/** - * init_iops_scc - set up iops - * @hwif: interface to set up - * - * Do the basic setup for the SCC hardware interface - * and then do the MMIO setup. - */ - -static void __devinit init_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->hwif_data = NULL; - if (pci_get_drvdata(dev) == NULL) - return; - init_mmio_iops_scc(hwif); -} - -static int __devinit scc_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - return ide_allocate_dma_engine(hwif); -} - -static u8 scc_cable_detect(ide_hwif_t *hwif) -{ - return ATA_CBL_PATA80; -} - -/** - * init_hwif_scc - set up hwif - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SCC - * requires several custom handlers so we override the default - * ide DMA handlers appropriately. - */ - -static void __devinit init_hwif_scc(ide_hwif_t *hwif) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - - /* PTERADD */ - out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); - - if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) - hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ - else - hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ -} - -static const struct ide_tp_ops scc_tp_ops = { - .exec_command = scc_exec_command, - .read_status = scc_read_status, - .read_altstatus = scc_read_altstatus, - .read_sff_dma_status = scc_read_sff_dma_status, - - .set_irq = scc_set_irq, - - .tf_load = scc_tf_load, - .tf_read = scc_tf_read, - - .input_data = scc_input_data, - .output_data = scc_output_data, -}; - -static const struct ide_port_ops scc_port_ops = { - .set_pio_mode = scc_set_pio_mode, - .set_dma_mode = scc_set_dma_mode, - .udma_filter = scc_udma_filter, - .cable_detect = scc_cable_detect, -}; - -static const struct ide_dma_ops scc_dma_ops = { - .dma_host_set = scc_dma_host_set, - .dma_setup = scc_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = scc_dma_start, - .dma_end = scc_dma_end, - .dma_test_irq = scc_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -#define DECLARE_SCC_DEV(name_str) \ - { \ - .name = name_str, \ - .init_iops = init_iops_scc, \ - .init_dma = scc_init_dma, \ - .init_hwif = init_hwif_scc, \ - .tp_ops = &scc_tp_ops, \ - .port_ops = &scc_port_ops, \ - .dma_ops = &scc_dma_ops, \ - .host_flags = IDE_HFLAG_SINGLE, \ - .pio_mask = ATA_PIO4, \ - } - -static const struct ide_port_info scc_chipsets[] __devinitdata = { - /* 0 */ DECLARE_SCC_DEV("sccIDE"), -}; - -/** - * scc_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an SCC PATA controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return init_setup_scc(dev, &scc_chipsets[id->driver_data]); -} - -/** - * scc_remove - pci layer remove entry - * @dev: PCI device - * - * Called by the PCI code when it removes an SCC PATA controller. - */ - -static void __devexit scc_remove(struct pci_dev *dev) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host = ports->host; - - ide_host_remove(host); - - iounmap((void*)ports->dma); - iounmap((void*)ports->ctl); - pci_release_selected_regions(dev, (1 << 2) - 1); - memset(ports, 0, sizeof(*ports)); -} - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); - -static struct pci_driver scc_pci_driver = { - .name = "SCC IDE", - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = __devexit_p(scc_remove), -}; - -static int scc_ide_init(void) -{ - return ide_pci_register_driver(&scc_pci_driver); -} - -module_init(scc_ide_init); -/* -- No exit code? -static void scc_ide_exit(void) -{ - ide_pci_unregister_driver(&scc_pci_driver); -} -module_exit(scc_ide_exit); - */ - - -MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c deleted file mode 100644 index 437bc919daf..00000000000 --- a/drivers/ide/pci/serverworks.c +++ /dev/null @@ -1,470 +0,0 @@ -/* - * Copyright (C) 1998-2000 Michel Aubry - * Copyright (C) 1998-2000 Andrzej Krzysztofowicz - * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * Portions copyright (c) 2001 Sun Microsystems - * - * - * RCC/ServerWorks IDE driver for Linux - * - * OSB4: `Open South Bridge' IDE Interface (fn 1) - * supports UDMA mode 2 (33 MB/s) - * - * CSB5: `Champion South Bridge' IDE Interface (fn 1) - * all revisions support UDMA mode 4 (66 MB/s) - * revision A2.0 and up support UDMA mode 5 (100 MB/s) - * - * *** The CSB5 does not provide ANY register *** - * *** to detect 80-conductor cable presence. *** - * - * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) - * - * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE - * controller same as the CSB6. Single channel ATA100 only. - * - * Documentation: - * Available under NDA only. Errata info very hard to get. - * - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "serverworks" - -#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ -#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ - -/* Seagate Barracuda ATA IV Family drives in UDMA mode 5 - * can overrun their FIFOs when used with the CSB5 */ -static const char *svwks_bad_ata100[] = { - "ST320011A", - "ST340016A", - "ST360021A", - "ST380021A", - NULL -}; - -static struct pci_dev *isa_dev; - -static int check_in_drive_lists (ide_drive_t *drive, const char **list) -{ - char *m = (char *)&drive->id[ATA_ID_PROD]; - - while (*list) - if (!strcmp(*list++, m)) - return 1; - return 0; -} - -static u8 svwks_udma_filter(ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u8 mask = 0; - - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) - return 0x1f; - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - u32 reg = 0; - if (isa_dev) - pci_read_config_dword(isa_dev, 0x64, ®); - - /* - * Don't enable UDMA on disk devices for the moment - */ - if(drive->media == ide_disk) - return 0; - /* Check the OSB4 DMA33 enable bit */ - return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; - } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { - return 0x07; - } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { - u8 btr = 0, mode; - pci_read_config_byte(dev, 0x5A, &btr); - mode = btr & 0x3; - - /* If someone decides to do UDMA133 on CSB5 the same - issue will bite so be inclusive */ - if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100)) - mode = 2; - - switch(mode) { - case 3: mask = 0x3f; break; - case 2: mask = 0x1f; break; - case 1: mask = 0x07; break; - default: mask = 0x00; break; - } - } - if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && - (!(PCI_FUNC(dev->devfn) & 1))) - mask = 0x1f; - - return mask; -} - -static u8 svwks_csb_check (struct pci_dev *dev) -{ - switch (dev->device) { - case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: - case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: - case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: - case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: - return 1; - default: - break; - } - return 0; -} - -static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; - static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; - - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - - pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]); - - if (svwks_csb_check(dev)) { - u16 csb_pio = 0; - - pci_read_config_word(dev, 0x4a, &csb_pio); - - csb_pio &= ~(0x0f << (4 * drive->dn)); - csb_pio |= (pio << (4 * drive->dn)); - - pci_write_config_word(dev, 0x4a, csb_pio); - } -} - -static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; - static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; - static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; - - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 unit = drive->dn & 1; - - u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; - - pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing); - pci_read_config_byte(dev, 0x54, &ultra_enable); - - ultra_timing &= ~(0x0F << (4*unit)); - ultra_enable &= ~(0x01 << drive->dn); - - if (speed >= XFER_UDMA_0) { - dma_timing |= dma_modes[2]; - ultra_timing |= (udma_modes[speed - XFER_UDMA_0] << (4 * unit)); - ultra_enable |= (0x01 << drive->dn); - } else if (speed >= XFER_MW_DMA_0) - dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; - - pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing); - pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing); - pci_write_config_byte(dev, 0x54, ultra_enable); -} - -static unsigned int init_chipset_svwks(struct pci_dev *dev) -{ - unsigned int reg; - u8 btr; - - /* force Master Latency Timer value to 64 PCICLKs */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); - - /* OSB4 : South Bridge and IDE */ - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, - PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); - if (isa_dev) { - pci_read_config_dword(isa_dev, 0x64, ®); - reg &= ~0x00002000; /* disable 600ns interrupt mask */ - if(!(reg & 0x00004000)) - printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS " - "enabled.\n", pci_name(dev)); - reg |= 0x00004000; /* enable UDMA/33 support */ - pci_write_config_dword(isa_dev, 0x64, reg); - } - } - - /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ - else if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { - - /* Third Channel Test */ - if (!(PCI_FUNC(dev->devfn) & 1)) { - struct pci_dev * findev = NULL; - u32 reg4c = 0; - findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, - PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL); - if (findev) { - pci_read_config_dword(findev, 0x4C, ®4c); - reg4c &= ~0x000007FF; - reg4c |= 0x00000040; - reg4c |= 0x00000020; - pci_write_config_dword(findev, 0x4C, reg4c); - pci_dev_put(findev); - } - outb_p(0x06, 0x0c00); - dev->irq = inb_p(0x0c01); - } else { - struct pci_dev * findev = NULL; - u8 reg41 = 0; - - findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, - PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL); - if (findev) { - pci_read_config_byte(findev, 0x41, ®41); - reg41 &= ~0x40; - pci_write_config_byte(findev, 0x41, reg41); - pci_dev_put(findev); - } - /* - * This is a device pin issue on CSB6. - * Since there will be a future raid mode, - * early versions of the chipset require the - * interrupt pin to be set, and it is a compatibility - * mode issue. - */ - if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) - dev->irq = 0; - } -// pci_read_config_dword(dev, 0x40, &pioreg) -// pci_write_config_dword(dev, 0x40, 0x99999999); -// pci_read_config_dword(dev, 0x44, &dmareg); -// pci_write_config_dword(dev, 0x44, 0xFFFFFFFF); - /* setup the UDMA Control register - * - * 1. clear bit 6 to enable DMA - * 2. enable DMA modes with bits 0-1 - * 00 : legacy - * 01 : udma2 - * 10 : udma2/udma4 - * 11 : udma2/udma4/udma5 - */ - pci_read_config_byte(dev, 0x5A, &btr); - btr &= ~0x40; - if (!(PCI_FUNC(dev->devfn) & 1)) - btr |= 0x2; - else - btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; - pci_write_config_byte(dev, 0x5A, btr); - } - /* Setup HT1000 SouthBridge Controller - Single Channel Only */ - else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) { - pci_read_config_byte(dev, 0x5A, &btr); - btr &= ~0x40; - btr |= 0x3; - pci_write_config_byte(dev, 0x5A, btr); - } - - return dev->irq; -} - -static u8 ata66_svwks_svwks(ide_hwif_t *hwif) -{ - return ATA_CBL_PATA80; -} - -/* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits - * of the subsystem device ID indicate presence of an 80-pin cable. - * Bit 15 clear = secondary IDE channel does not have 80-pin cable. - * Bit 15 set = secondary IDE channel has 80-pin cable. - * Bit 14 clear = primary IDE channel does not have 80-pin cable. - * Bit 14 set = primary IDE channel has 80-pin cable. - */ -static u8 ata66_svwks_dell(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL && - dev->vendor == PCI_VENDOR_ID_SERVERWORKS && - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE || - dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE)) - return ((1 << (hwif->channel + 14)) & - dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - return ATA_CBL_PATA40; -} - -/* Sun Cobalt Alpine hardware avoids the 80-pin cable - * detect issue by attaching the drives directly to the board. - * This check follows the Dell precedent (how scary is that?!) - * - * WARNING: this only works on Alpine hardware! - */ -static u8 ata66_svwks_cobalt(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN && - dev->vendor == PCI_VENDOR_ID_SERVERWORKS && - dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) - return ((1 << (hwif->channel + 14)) & - dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - return ATA_CBL_PATA40; -} - -static u8 svwks_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - /* Server Works */ - if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS) - return ata66_svwks_svwks (hwif); - - /* Dell PowerEdge */ - if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL) - return ata66_svwks_dell (hwif); - - /* Cobalt Alpine */ - if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN) - return ata66_svwks_cobalt (hwif); - - /* Per Specified Design by OEM, and ASIC Architect */ - if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) - return ATA_CBL_PATA80; - - return ATA_CBL_PATA40; -} - -static const struct ide_port_ops osb4_port_ops = { - .set_pio_mode = svwks_set_pio_mode, - .set_dma_mode = svwks_set_dma_mode, - .udma_filter = svwks_udma_filter, -}; - -static const struct ide_port_ops svwks_port_ops = { - .set_pio_mode = svwks_set_pio_mode, - .set_dma_mode = svwks_set_dma_mode, - .udma_filter = svwks_udma_filter, - .cable_detect = svwks_cable_detect, -}; - -#define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS - -static const struct ide_port_info serverworks_chipsets[] __devinitdata = { - { /* 0: OSB4 */ - .name = DRV_NAME, - .init_chipset = init_chipset_svwks, - .port_ops = &osb4_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = 0x00, /* UDMA is problematic on OSB4 */ - }, - { /* 1: CSB5 */ - .name = DRV_NAME, - .init_chipset = init_chipset_svwks, - .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - }, - { /* 2: CSB6 */ - .name = DRV_NAME, - .init_chipset = init_chipset_svwks, - .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - }, - { /* 3: CSB6-2 */ - .name = DRV_NAME, - .init_chipset = init_chipset_svwks, - .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - }, - { /* 4: HT1000 */ - .name = DRV_NAME, - .init_chipset = init_chipset_svwks, - .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - } -}; - -/** - * svwks_init_one - called when a OSB/CSB is found - * @dev: the svwks device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - */ - -static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_port_info d; - u8 idx = id->driver_data; - - d = serverworks_chipsets[idx]; - - if (idx == 1) - d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; - else if (idx == 2 || idx == 3) { - if ((PCI_FUNC(dev->devfn) & 1) == 0) { - if (pci_resource_start(dev, 0) != 0x01f1) - d.host_flags |= IDE_HFLAG_NON_BOOTABLE; - d.host_flags |= IDE_HFLAG_SINGLE; - } else - d.host_flags &= ~IDE_HFLAG_SINGLE; - } - - return ide_pci_init_one(dev, &d, NULL); -} - -static const struct pci_device_id svwks_pci_tbl[] = { - { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0 }, - { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1 }, - { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2 }, - { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3 }, - { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); - -static struct pci_driver svwks_pci_driver = { - .name = "Serverworks_IDE", - .id_table = svwks_pci_tbl, - .probe = svwks_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init svwks_ide_init(void) -{ - return ide_pci_register_driver(&svwks_pci_driver); -} - -static void __exit svwks_ide_exit(void) -{ - pci_unregister_driver(&svwks_pci_driver); -} - -module_init(svwks_ide_init); -module_exit(svwks_ide_exit); - -MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c deleted file mode 100644 index dd634541ce3..00000000000 --- a/drivers/ide/pci/sgiioc4.c +++ /dev/null @@ -1,701 +0,0 @@ -/* - * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. - * Copyright (C) 2008 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * For further information regarding this notice, see: - * - * http://oss.sgi.com/projects/GenInfo/NoticeExplan - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> -#include <linux/scatterlist.h> -#include <linux/ioc4.h> -#include <asm/io.h> - -#include <linux/ide.h> - -#define DRV_NAME "SGIIOC4" - -/* IOC4 Specific Definitions */ -#define IOC4_CMD_OFFSET 0x100 -#define IOC4_CTRL_OFFSET 0x120 -#define IOC4_DMA_OFFSET 0x140 -#define IOC4_INTR_OFFSET 0x0 - -#define IOC4_TIMING 0x00 -#define IOC4_DMA_PTR_L 0x01 -#define IOC4_DMA_PTR_H 0x02 -#define IOC4_DMA_ADDR_L 0x03 -#define IOC4_DMA_ADDR_H 0x04 -#define IOC4_BC_DEV 0x05 -#define IOC4_BC_MEM 0x06 -#define IOC4_DMA_CTRL 0x07 -#define IOC4_DMA_END_ADDR 0x08 - -/* Bits in the IOC4 Control/Status Register */ -#define IOC4_S_DMA_START 0x01 -#define IOC4_S_DMA_STOP 0x02 -#define IOC4_S_DMA_DIR 0x04 -#define IOC4_S_DMA_ACTIVE 0x08 -#define IOC4_S_DMA_ERROR 0x10 -#define IOC4_ATA_MEMERR 0x02 - -/* Read/Write Directions */ -#define IOC4_DMA_WRITE 0x04 -#define IOC4_DMA_READ 0x00 - -/* Interrupt Register Offsets */ -#define IOC4_INTR_REG 0x03 -#define IOC4_INTR_SET 0x05 -#define IOC4_INTR_CLEAR 0x07 - -#define IOC4_IDE_CACHELINE_SIZE 128 -#define IOC4_CMD_CTL_BLK_SIZE 0x20 -#define IOC4_SUPPORTED_FIRMWARE_REV 46 - -typedef struct { - u32 timing_reg0; - u32 timing_reg1; - u32 low_mem_ptr; - u32 high_mem_ptr; - u32 low_mem_addr; - u32 high_mem_addr; - u32 dev_byte_count; - u32 mem_byte_count; - u32 status; -} ioc4_dma_regs_t; - -/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */ -/* IOC4 has only 1 IDE channel */ -#define IOC4_PRD_BYTES 16 -#define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES)) - - -static void -sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, - unsigned long ctrl_port, unsigned long irq_port) -{ - unsigned long reg = data_port; - int i; - - /* Registers are word (32 bit) aligned */ - for (i = 0; i <= 7; i++) - hw->io_ports_array[i] = reg + i * 4; - - if (ctrl_port) - hw->io_ports.ctl_addr = ctrl_port; - - if (irq_port) - hw->io_ports.irq_addr = irq_port; -} - -static void -sgiioc4_maskproc(ide_drive_t * drive, int mask) -{ - writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0), - (void __iomem *)drive->hwif->io_ports.ctl_addr); -} - -static int -sgiioc4_checkirq(ide_hwif_t * hwif) -{ - unsigned long intr_addr = - hwif->io_ports.irq_addr + IOC4_INTR_REG * 4; - - if ((u8)readl((void __iomem *)intr_addr) & 0x03) - return 1; - - return 0; -} - -static u8 sgiioc4_read_status(ide_hwif_t *); - -static int -sgiioc4_clearirq(ide_drive_t * drive) -{ - u32 intr_reg; - ide_hwif_t *hwif = HWIF(drive); - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2); - - /* Code to check for PCI error conditions */ - intr_reg = readl((void __iomem *)other_ir); - if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */ - /* - * Using sgiioc4_read_status to read the Status register has a - * side effect of clearing the interrupt. The first read should - * clear it if it is set. The second read should return - * a "clear" status if it got cleared. If not, then spin - * for a bit trying to clear it. - */ - u8 stat = sgiioc4_read_status(hwif); - int count = 0; - - stat = sgiioc4_read_status(hwif); - while ((stat & ATA_BUSY) && (count++ < 100)) { - udelay(1); - stat = sgiioc4_read_status(hwif); - } - - if (intr_reg & 0x02) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - /* Error when transferring DMA data on PCI bus */ - u32 pci_err_addr_low, pci_err_addr_high, - pci_stat_cmd_reg; - - pci_err_addr_low = - readl((void __iomem *)io_ports->irq_addr); - pci_err_addr_high = - readl((void __iomem *)(io_ports->irq_addr + 4)); - pci_read_config_dword(dev, PCI_COMMAND, - &pci_stat_cmd_reg); - printk(KERN_ERR - "%s(%s) : PCI Bus Error when doing DMA:" - " status-cmd reg is 0x%x\n", - __func__, drive->name, pci_stat_cmd_reg); - printk(KERN_ERR - "%s(%s) : PCI Error Address is 0x%x%x\n", - __func__, drive->name, - pci_err_addr_high, pci_err_addr_low); - /* Clear the PCI Error indicator */ - pci_write_config_dword(dev, PCI_COMMAND, 0x00000146); - } - - /* Clear the Interrupt, Error bits on the IOC4 */ - writel(0x03, (void __iomem *)other_ir); - - intr_reg = readl((void __iomem *)other_ir); - } - - return intr_reg & 3; -} - -static void sgiioc4_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4; - unsigned int reg = readl((void __iomem *)ioc4_dma_addr); - unsigned int temp_reg = reg | IOC4_S_DMA_START; - - writel(temp_reg, (void __iomem *)ioc4_dma_addr); -} - -static u32 -sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) -{ - unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4; - u32 ioc4_dma; - int count; - - count = 0; - ioc4_dma = readl((void __iomem *)ioc4_dma_addr); - while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) { - udelay(1); - ioc4_dma = readl((void __iomem *)ioc4_dma_addr); - } - return ioc4_dma; -} - -/* Stops the IOC4 DMA Engine */ -static int sgiioc4_dma_end(ide_drive_t *drive) -{ - u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0; - ide_hwif_t *hwif = HWIF(drive); - unsigned long dma_base = hwif->dma_base; - int dma_stat = 0; - unsigned long *ending_dma = ide_get_hwifdata(hwif); - - writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4)); - - ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); - - if (ioc4_dma & IOC4_S_DMA_STOP) { - printk(KERN_ERR - "%s(%s): IOC4 DMA STOP bit is still 1 :" - "ioc4_dma_reg 0x%x\n", - __func__, drive->name, ioc4_dma); - dma_stat = 1; - } - - /* - * The IOC4 will DMA 1's to the ending dma area to indicate that - * previous data DMA is complete. This is necessary because of relaxed - * ordering between register reads and DMA writes on the Altix. - */ - while ((cnt++ < 200) && (!valid)) { - for (num = 0; num < 16; num++) { - if (ending_dma[num]) { - valid = 1; - break; - } - } - udelay(1); - } - if (!valid) { - printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__, - drive->name); - dma_stat = 1; - } - - bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4)); - bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4)); - - if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) { - if (bc_dev > bc_mem + 8) { - printk(KERN_ERR - "%s(%s): WARNING!! byte_count_dev %d " - "!= byte_count_mem %d\n", - __func__, drive->name, bc_dev, bc_mem); - } - } - - drive->waiting_for_dma = 0; - ide_destroy_dmatable(drive); - - return dma_stat; -} - -static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ -} - -/* returns 1 if dma irq issued, 0 otherwise */ -static int sgiioc4_dma_test_irq(ide_drive_t *drive) -{ - return sgiioc4_checkirq(HWIF(drive)); -} - -static void sgiioc4_dma_host_set(ide_drive_t *drive, int on) -{ - if (!on) - sgiioc4_clearirq(drive); -} - -static void -sgiioc4_resetproc(ide_drive_t * drive) -{ - sgiioc4_dma_end(drive); - sgiioc4_clearirq(drive); -} - -static void -sgiioc4_dma_lost_irq(ide_drive_t * drive) -{ - sgiioc4_resetproc(drive); - - ide_dma_lost_irq(drive); -} - -static u8 sgiioc4_read_status(ide_hwif_t *hwif) -{ - unsigned long port = hwif->io_ports.status_addr; - u8 reg = (u8) readb((void __iomem *) port); - - if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */ - if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */ - unsigned long other_ir = port - 0x110; - unsigned int intr_reg = (u32) readl((void __iomem *) other_ir); - - /* Clear the Interrupt, Error bits on the IOC4 */ - if (intr_reg & 0x03) { - writel(0x03, (void __iomem *) other_ir); - intr_reg = (u32) readl((void __iomem *) other_ir); - } - } - } - - return reg; -} - -/* Creates a dma map for the scatter-gather list entries */ -static int __devinit -ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; - void __iomem *virt_dma_base; - int num_ports = sizeof (ioc4_dma_regs_t); - void *pad; - - if (dma_base == 0) - return -1; - - printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); - - if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) { - printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx " - "already in use\n", __func__, hwif->name, - dma_base, dma_base + num_ports - 1); - return -1; - } - - virt_dma_base = ioremap(dma_base, num_ports); - if (virt_dma_base == NULL) { - printk(KERN_ERR "%s(%s) -- ERROR: unable to map addresses " - "0x%lx to 0x%lx\n", __func__, hwif->name, - dma_base, dma_base + num_ports - 1); - goto dma_remap_failure; - } - hwif->dma_base = (unsigned long) virt_dma_base; - - hwif->sg_max_nents = IOC4_PRD_ENTRIES; - - hwif->prd_max_nents = IOC4_PRD_ENTRIES; - hwif->prd_ent_size = IOC4_PRD_BYTES; - - if (ide_allocate_dma_engine(hwif)) - goto dma_pci_alloc_failure; - - pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE, - (dma_addr_t *)&hwif->extra_base); - if (pad) { - ide_set_hwifdata(hwif, pad); - return 0; - } - - ide_release_dma_engine(hwif); - - printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n", - __func__, hwif->name); - printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name); - -dma_pci_alloc_failure: - iounmap(virt_dma_base); - -dma_remap_failure: - release_mem_region(dma_base, num_ports); - - return -1; -} - -/* Initializes the IOC4 DMA Engine */ -static void -sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) -{ - u32 ioc4_dma; - ide_hwif_t *hwif = HWIF(drive); - unsigned long dma_base = hwif->dma_base; - unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4; - u32 dma_addr, ending_dma_addr; - - ioc4_dma = readl((void __iomem *)ioc4_dma_addr); - - if (ioc4_dma & IOC4_S_DMA_ACTIVE) { - printk(KERN_WARNING - "%s(%s):Warning!! DMA from previous transfer was still active\n", - __func__, drive->name); - writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); - ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); - - if (ioc4_dma & IOC4_S_DMA_STOP) - printk(KERN_ERR - "%s(%s) : IOC4 Dma STOP bit is still 1\n", - __func__, drive->name); - } - - ioc4_dma = readl((void __iomem *)ioc4_dma_addr); - if (ioc4_dma & IOC4_S_DMA_ERROR) { - printk(KERN_WARNING - "%s(%s) : Warning!! - DMA Error during Previous" - " transfer | status 0x%x\n", - __func__, drive->name, ioc4_dma); - writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); - ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); - - if (ioc4_dma & IOC4_S_DMA_STOP) - printk(KERN_ERR - "%s(%s) : IOC4 DMA STOP bit is still 1\n", - __func__, drive->name); - } - - /* Address of the Scatter Gather List */ - dma_addr = cpu_to_le32(hwif->dmatable_dma); - writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4)); - - /* Address of the Ending DMA */ - memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); - ending_dma_addr = cpu_to_le32(hwif->extra_base); - writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4)); - - writel(dma_direction, (void __iomem *)ioc4_dma_addr); - drive->waiting_for_dma = 1; -} - -/* IOC4 Scatter Gather list Format */ -/* 128 Bit entries to support 64 bit addresses in the future */ -/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */ -/* --------------------------------------------------------------------- */ -/* | Upper 32 bits - Zero | Lower 32 bits- address | */ -/* --------------------------------------------------------------------- */ -/* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */ -/* --------------------------------------------------------------------- */ -/* Creates the scatter gather list, DMA Table */ -static unsigned int -sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned int *table = hwif->dmatable_cpu; - unsigned int count = 0, i = 1; - struct scatterlist *sg; - - hwif->sg_nents = i = ide_build_sglist(drive, rq); - - if (!i) - return 0; /* sglist of length Zero */ - - sg = hwif->sg_table; - while (i && sg_dma_len(sg)) { - dma_addr_t cur_addr; - int cur_len; - cur_addr = sg_dma_address(sg); - cur_len = sg_dma_len(sg); - - while (cur_len) { - if (count++ >= IOC4_PRD_ENTRIES) { - printk(KERN_WARNING - "%s: DMA table too small\n", - drive->name); - goto use_pio_instead; - } else { - u32 bcount = - 0x10000 - (cur_addr & 0xffff); - - if (bcount > cur_len) - bcount = cur_len; - - /* put the addr, length in - * the IOC4 dma-table format */ - *table = 0x0; - table++; - *table = cpu_to_be32(cur_addr); - table++; - *table = 0x0; - table++; - - *table = cpu_to_be32(bcount); - table++; - - cur_addr += bcount; - cur_len -= bcount; - } - } - - sg = sg_next(sg); - i--; - } - - if (count) { - table--; - *table |= cpu_to_be32(0x80000000); - return count; - } - -use_pio_instead: - ide_destroy_dmatable(drive); - - return 0; /* revert to PIO for this request */ -} - -static int sgiioc4_dma_setup(ide_drive_t *drive) -{ - struct request *rq = HWGROUP(drive)->rq; - unsigned int count = 0; - int ddir; - - if (rq_data_dir(rq)) - ddir = PCI_DMA_TODEVICE; - else - ddir = PCI_DMA_FROMDEVICE; - - if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) { - /* try PIO instead of DMA */ - ide_map_sg(drive, rq); - return 1; - } - - if (rq_data_dir(rq)) - /* Writes TO the IOC4 FROM Main Memory */ - ddir = IOC4_DMA_READ; - else - /* Writes FROM the IOC4 TO Main Memory */ - ddir = IOC4_DMA_WRITE; - - sgiioc4_configure_for_dma(ddir, drive); - - return 0; -} - -static const struct ide_tp_ops sgiioc4_tp_ops = { - .exec_command = ide_exec_command, - .read_status = sgiioc4_read_status, - .read_altstatus = ide_read_altstatus, - .read_sff_dma_status = ide_read_sff_dma_status, - - .set_irq = ide_set_irq, - - .tf_load = ide_tf_load, - .tf_read = ide_tf_read, - - .input_data = ide_input_data, - .output_data = ide_output_data, -}; - -static const struct ide_port_ops sgiioc4_port_ops = { - .set_dma_mode = sgiioc4_set_dma_mode, - /* reset DMA engine, clear IRQs */ - .resetproc = sgiioc4_resetproc, - /* mask on/off NIEN register */ - .maskproc = sgiioc4_maskproc, -}; - -static const struct ide_dma_ops sgiioc4_dma_ops = { - .dma_host_set = sgiioc4_dma_host_set, - .dma_setup = sgiioc4_dma_setup, - .dma_start = sgiioc4_dma_start, - .dma_end = sgiioc4_dma_end, - .dma_test_irq = sgiioc4_dma_test_irq, - .dma_lost_irq = sgiioc4_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info sgiioc4_port_info __devinitdata = { - .name = DRV_NAME, - .chipset = ide_pci, - .init_dma = ide_dma_sgiioc4, - .tp_ops = &sgiioc4_tp_ops, - .port_ops = &sgiioc4_port_ops, - .dma_ops = &sgiioc4_dma_ops, - .host_flags = IDE_HFLAG_MMIO, - .mwdma_mask = ATA_MWDMA2_ONLY, -}; - -static int __devinit -sgiioc4_ide_setup_pci_device(struct pci_dev *dev) -{ - unsigned long cmd_base, irqport; - unsigned long bar0, cmd_phys_base, ctl; - void __iomem *virt_base; - struct ide_host *host; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - struct ide_port_info d = sgiioc4_port_info; - int rc; - - /* Get the CmdBlk and CtrlBlk Base Registers */ - bar0 = pci_resource_start(dev, 0); - virt_base = ioremap(bar0, pci_resource_len(dev, 0)); - if (virt_base == NULL) { - printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n", - DRV_NAME, bar0); - return -ENOMEM; - } - cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; - ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; - irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; - - cmd_phys_base = bar0 + IOC4_CMD_OFFSET; - if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, - DRV_NAME) == NULL) { - printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx " - "already in use\n", DRV_NAME, pci_name(dev), - cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); - return -EBUSY; - } - - /* Initialize the IO registers */ - memset(&hw, 0, sizeof(hw)); - sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport); - hw.irq = dev->irq; - hw.chipset = ide_pci; - hw.dev = &dev->dev; - - /* Initializing chipset IRQ Registers */ - writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); - - host = ide_host_alloc(&d, hws); - if (host == NULL) { - rc = -ENOMEM; - goto err; - } - - rc = ide_host_register(host, &d, hws); - if (rc) - goto err_free; - - return 0; -err_free: - ide_host_free(host); -err: - release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE); - iounmap(virt_base); - return rc; -} - -static unsigned int __devinit -pci_init_sgiioc4(struct pci_dev *dev) -{ - int ret; - - printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n", - DRV_NAME, pci_name(dev), dev->revision); - - if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) { - printk(KERN_ERR "Skipping %s IDE controller in slot %s: " - "firmware is obsolete - please upgrade to " - "revision46 or higher\n", - DRV_NAME, pci_name(dev)); - ret = -EAGAIN; - goto out; - } - ret = sgiioc4_ide_setup_pci_device(dev); -out: - return ret; -} - -int -ioc4_ide_attach_one(struct ioc4_driver_data *idd) -{ - /* PCI-RT does not bring out IDE connection. - * Do not attach to this particular IOC4. - */ - if (idd->idd_variant == IOC4_VARIANT_PCI_RT) - return 0; - - return pci_init_sgiioc4(idd->idd_pdev); -} - -static struct ioc4_submodule ioc4_ide_submodule = { - .is_name = "IOC4_ide", - .is_owner = THIS_MODULE, - .is_probe = ioc4_ide_attach_one, -/* .is_remove = ioc4_ide_remove_one, */ -}; - -static int __init ioc4_ide_init(void) -{ - return ioc4_register_submodule(&ioc4_ide_submodule); -} - -late_initcall(ioc4_ide_init); /* Call only after IDE init is done */ - -MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); -MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c deleted file mode 100644 index eb4faf92c57..00000000000 --- a/drivers/ide/pci/siimage.c +++ /dev/null @@ -1,857 +0,0 @@ -/* - * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> - * Copyright (C) 2007-2008 MontaVista Software, Inc. - * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz - * - * May be copied or modified under the terms of the GNU General Public License - * - * Documentation for CMD680: - * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2 - * - * Documentation for SiI 3112: - * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 - * - * Errata and other documentation only available under NDA. - * - * - * FAQ Items: - * If you are using Marvell SATA-IDE adapters with Maxtor drives - * ensure the system is set up for ATA100/UDMA5, not UDMA6. - * - * If you are using WD drives with SATA bridges you must set the - * drive to "Single". "Master" will hang. - * - * If you have strange problems with nVidia chipset systems please - * see the SI support documentation and update your system BIOS - * if necessary - * - * The Dell DRAC4 has some interesting features including effectively hot - * unplugging/replugging the virtual CD interface when the DRAC is reset. - * This often causes drivers/ide/siimage to panic but is ok with the rather - * smarter code in libata. - * - * TODO: - * - IORDY fixes - * - VDMA support - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> -#include <linux/io.h> - -#define DRV_NAME "siimage" - -/** - * pdev_is_sata - check if device is SATA - * @pdev: PCI device to check - * - * Returns true if this is a SATA controller - */ - -static int pdev_is_sata(struct pci_dev *pdev) -{ -#ifdef CONFIG_BLK_DEV_IDE_SATA - switch (pdev->device) { - case PCI_DEVICE_ID_SII_3112: - case PCI_DEVICE_ID_SII_1210SA: - return 1; - case PCI_DEVICE_ID_SII_680: - return 0; - } - BUG(); -#endif - return 0; -} - -/** - * is_sata - check if hwif is SATA - * @hwif: interface to check - * - * Returns true if this is a SATA controller - */ - -static inline int is_sata(ide_hwif_t *hwif) -{ - return pdev_is_sata(to_pci_dev(hwif->dev)); -} - -/** - * siimage_selreg - return register base - * @hwif: interface - * @r: config offset - * - * Turn a config register offset into the right address in either - * PCI space or MMIO space to access the control register in question - * Thankfully this is a configuration operation, so isn't performance - * critical. - */ - -static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) -{ - unsigned long base = (unsigned long)hwif->hwif_data; - - base += 0xA0 + r; - if (hwif->host_flags & IDE_HFLAG_MMIO) - base += hwif->channel << 6; - else - base += hwif->channel << 4; - return base; -} - -/** - * siimage_seldev - return register base - * @hwif: interface - * @r: config offset - * - * Turn a config register offset into the right address in either - * PCI space or MMIO space to access the control register in question - * including accounting for the unit shift. - */ - -static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long base = (unsigned long)hwif->hwif_data; - u8 unit = drive->dn & 1; - - base += 0xA0 + r; - if (hwif->host_flags & IDE_HFLAG_MMIO) - base += hwif->channel << 6; - else - base += hwif->channel << 4; - base |= unit << unit; - return base; -} - -static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr) -{ - struct ide_host *host = pci_get_drvdata(dev); - u8 tmp = 0; - - if (host->host_priv) - tmp = readb((void __iomem *)addr); - else - pci_read_config_byte(dev, addr, &tmp); - - return tmp; -} - -static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr) -{ - struct ide_host *host = pci_get_drvdata(dev); - u16 tmp = 0; - - if (host->host_priv) - tmp = readw((void __iomem *)addr); - else - pci_read_config_word(dev, addr, &tmp); - - return tmp; -} - -static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr) -{ - struct ide_host *host = pci_get_drvdata(dev); - - if (host->host_priv) - writeb(val, (void __iomem *)addr); - else - pci_write_config_byte(dev, addr, val); -} - -static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr) -{ - struct ide_host *host = pci_get_drvdata(dev); - - if (host->host_priv) - writew(val, (void __iomem *)addr); - else - pci_write_config_word(dev, addr, val); -} - -static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr) -{ - struct ide_host *host = pci_get_drvdata(dev); - - if (host->host_priv) - writel(val, (void __iomem *)addr); - else - pci_write_config_dword(dev, addr, val); -} - -/** - * sil_udma_filter - compute UDMA mask - * @drive: IDE device - * - * Compute the available UDMA speeds for the device on the interface. - * - * For the CMD680 this depends on the clocking mode (scsc), for the - * SI3112 SATA controller life is a bit simpler. - */ - -static u8 sil_pata_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long base = (unsigned long)hwif->hwif_data; - u8 scsc, mask = 0; - - base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A; - - scsc = sil_ioread8(dev, base); - - switch (scsc & 0x30) { - case 0x10: /* 133 */ - mask = ATA_UDMA6; - break; - case 0x20: /* 2xPCI */ - mask = ATA_UDMA6; - break; - case 0x00: /* 100 */ - mask = ATA_UDMA5; - break; - default: /* Disabled ? */ - BUG(); - } - - return mask; -} - -static u8 sil_sata_udma_filter(ide_drive_t *drive) -{ - char *m = (char *)&drive->id[ATA_ID_PROD]; - - return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6; -} - -/** - * sil_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * Load the timing settings for this device mode into the - * controller. If we are in PIO mode 3 or 4 turn on IORDY - * monitoring (bit 9). The TF timing is bits 31:16 - */ - -static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) -{ - static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; - static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; - - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - ide_drive_t *pair = ide_get_pair_dev(drive); - u32 speedt = 0; - u16 speedp = 0; - unsigned long addr = siimage_seldev(drive, 0x04); - unsigned long tfaddr = siimage_selreg(hwif, 0x02); - unsigned long base = (unsigned long)hwif->hwif_data; - u8 tf_pio = pio; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) - : (mmio ? 0xB4 : 0x80); - u8 mode = 0; - u8 unit = drive->dn & 1; - - /* trim *taskfile* PIO to the slowest of the master/slave */ - if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); - - if (pair_pio < tf_pio) - tf_pio = pair_pio; - } - - /* cheat for now and use the docs */ - speedp = data_speed[pio]; - speedt = tf_speed[tf_pio]; - - sil_iowrite16(dev, speedp, addr); - sil_iowrite16(dev, speedt, tfaddr); - - /* now set up IORDY */ - speedp = sil_ioread16(dev, tfaddr - 2); - speedp &= ~0x200; - if (pio > 2) - speedp |= 0x200; - sil_iowrite16(dev, speedp, tfaddr - 2); - - mode = sil_ioread8(dev, base + addr_mask); - mode &= ~(unit ? 0x30 : 0x03); - mode |= unit ? 0x10 : 0x01; - sil_iowrite8(dev, mode, base + addr_mask); -} - -/** - * sil_set_dma_mode - set host controller for DMA mode - * @drive: drive - * @speed: DMA mode - * - * Tune the SiI chipset for the desired DMA mode. - */ - -static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; - static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; - static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; - - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long base = (unsigned long)hwif->hwif_data; - u16 ultra = 0, multi = 0; - u8 mode = 0, unit = drive->dn & 1; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) - : (mmio ? 0xB4 : 0x80); - unsigned long ma = siimage_seldev(drive, 0x08); - unsigned long ua = siimage_seldev(drive, 0x0C); - - scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); - mode = sil_ioread8 (dev, base + addr_mask); - multi = sil_ioread16(dev, ma); - ultra = sil_ioread16(dev, ua); - - mode &= ~(unit ? 0x30 : 0x03); - ultra &= ~0x3F; - scsc = ((scsc & 0x30) == 0x00) ? 0 : 1; - - scsc = is_sata(hwif) ? 1 : scsc; - - if (speed >= XFER_UDMA_0) { - multi = dma[2]; - ultra |= scsc ? ultra6[speed - XFER_UDMA_0] : - ultra5[speed - XFER_UDMA_0]; - mode |= unit ? 0x30 : 0x03; - } else { - multi = dma[speed - XFER_MW_DMA_0]; - mode |= unit ? 0x20 : 0x02; - } - - sil_iowrite8 (dev, mode, base + addr_mask); - sil_iowrite16(dev, multi, ma); - sil_iowrite16(dev, ultra, ua); -} - -/* returns 1 if dma irq issued, 0 otherwise */ -static int siimage_io_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 dma_altstat = 0; - unsigned long addr = siimage_selreg(hwif, 1); - - /* return 1 if INTR asserted */ - if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4) - return 1; - - /* return 1 if Device INTR asserted */ - pci_read_config_byte(dev, addr, &dma_altstat); - if (dma_altstat & 8) - return 0; /* return 1; */ - - return 0; -} - -/** - * siimage_mmio_dma_test_irq - check we caused an IRQ - * @drive: drive we are testing - * - * Check if we caused an IDE DMA interrupt. We may also have caused - * SATA status interrupts, if so we clean them up and continue. - */ - -static int siimage_mmio_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long addr = siimage_selreg(hwif, 0x1); - void __iomem *sata_error_addr - = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; - - if (sata_error_addr) { - unsigned long base = (unsigned long)hwif->hwif_data; - u32 ext_stat = readl((void __iomem *)(base + 0x10)); - u8 watchdog = 0; - - if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) { - u32 sata_error = readl(sata_error_addr); - - writel(sata_error, sata_error_addr); - watchdog = (sata_error & 0x00680000) ? 1 : 0; - printk(KERN_WARNING "%s: sata_error = 0x%08x, " - "watchdog = %d, %s\n", - drive->name, sata_error, watchdog, __func__); - } else - watchdog = (ext_stat & 0x8000) ? 1 : 0; - - ext_stat >>= 16; - if (!(ext_stat & 0x0404) && !watchdog) - return 0; - } - - /* return 1 if INTR asserted */ - if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4) - return 1; - - /* return 1 if Device INTR asserted */ - if (readb((void __iomem *)addr) & 8) - return 0; /* return 1; */ - - return 0; -} - -static int siimage_dma_test_irq(ide_drive_t *drive) -{ - if (drive->hwif->host_flags & IDE_HFLAG_MMIO) - return siimage_mmio_dma_test_irq(drive); - else - return siimage_io_dma_test_irq(drive); -} - -/** - * sil_sata_reset_poll - wait for SATA reset - * @drive: drive we are resetting - * - * Poll the SATA phy and see whether it has come back from the dead - * yet. - */ - -static int sil_sata_reset_poll(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - void __iomem *sata_status_addr - = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET]; - - if (sata_status_addr) { - /* SATA Status is available only when in MMIO mode */ - u32 sata_stat = readl(sata_status_addr); - - if ((sata_stat & 0x03) != 0x03) { - printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", - hwif->name, sata_stat); - return -ENXIO; - } - } - - return 0; -} - -/** - * sil_sata_pre_reset - reset hook - * @drive: IDE device being reset - * - * For the SATA devices we need to handle recalibration/geometry - * differently - */ - -static void sil_sata_pre_reset(ide_drive_t *drive) -{ - if (drive->media == ide_disk) { - drive->special.b.set_geometry = 0; - drive->special.b.recalibrate = 0; - } -} - -/** - * init_chipset_siimage - set up an SI device - * @dev: PCI device - * - * Perform the initial PCI set up for this device. Attempt to switch - * to 133 MHz clocking if the system isn't already set up to do it. - */ - -static unsigned int init_chipset_siimage(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - void __iomem *ioaddr = host->host_priv; - unsigned long base, scsc_addr; - u8 rev = dev->revision, tmp; - - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255); - - if (ioaddr) - pci_set_master(dev); - - base = (unsigned long)ioaddr; - - if (ioaddr && pdev_is_sata(dev)) { - u32 tmp32, irq_mask; - - /* make sure IDE0/1 interrupts are not masked */ - irq_mask = (1 << 22) | (1 << 23); - tmp32 = readl(ioaddr + 0x48); - if (tmp32 & irq_mask) { - tmp32 &= ~irq_mask; - writel(tmp32, ioaddr + 0x48); - readl(ioaddr + 0x48); /* flush */ - } - writel(0, ioaddr + 0x148); - writel(0, ioaddr + 0x1C8); - } - - sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80); - sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84); - - scsc_addr = base ? (base + 0x4A) : 0x8A; - tmp = sil_ioread8(dev, scsc_addr); - - switch (tmp & 0x30) { - case 0x00: - /* On 100 MHz clocking, try and switch to 133 MHz */ - sil_iowrite8(dev, tmp | 0x10, scsc_addr); - break; - case 0x30: - /* Clocking is disabled, attempt to force 133MHz clocking. */ - sil_iowrite8(dev, tmp & ~0x20, scsc_addr); - case 0x10: - /* On 133Mhz clocking. */ - break; - case 0x20: - /* On PCIx2 clocking. */ - break; - } - - tmp = sil_ioread8(dev, scsc_addr); - - sil_iowrite8 (dev, 0x72, base + 0xA1); - sil_iowrite16(dev, 0x328A, base + 0xA2); - sil_iowrite32(dev, 0x62DD62DD, base + 0xA4); - sil_iowrite32(dev, 0x43924392, base + 0xA8); - sil_iowrite32(dev, 0x40094009, base + 0xAC); - sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1); - sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2); - sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4); - sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8); - sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC); - - if (base && pdev_is_sata(dev)) { - writel(0xFFFF0000, ioaddr + 0x108); - writel(0xFFFF0000, ioaddr + 0x188); - writel(0x00680000, ioaddr + 0x148); - writel(0x00680000, ioaddr + 0x1C8); - } - - /* report the clocking mode of the controller */ - if (!pdev_is_sata(dev)) { - static const char *clk_str[] = - { "== 100", "== 133", "== 2X PCI", "DISABLED!" }; - - tmp >>= 4; - printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n", - pci_name(dev), clk_str[tmp & 3]); - } - - return 0; -} - -/** - * init_mmio_iops_siimage - set up the iops for MMIO - * @hwif: interface to set up - * - * The basic setup here is fairly simple, we can use standard MMIO - * operations. However we do have to set the taskfile register offsets - * by hand as there isn't a standard defined layout for them this time. - * - * The hardware supports buffered taskfiles and also some rather nice - * extended PRD tables. For better SI3112 support use the libata driver - */ - -static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - void *addr = host->host_priv; - u8 ch = hwif->channel; - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long base; - - /* - * Fill in the basic hwif bits - */ - hwif->host_flags |= IDE_HFLAG_MMIO; - - hwif->hwif_data = addr; - - /* - * Now set up the hw. We have to do this ourselves as the - * MMIO layout isn't the same as the standard port based I/O. - */ - memset(io_ports, 0, sizeof(*io_ports)); - - base = (unsigned long)addr; - if (ch) - base += 0xC0; - else - base += 0x80; - - /* - * The buffered task file doesn't have status/control, so we - * can't currently use it sanely since we want to use LBA48 mode. - */ - io_ports->data_addr = base; - io_ports->error_addr = base + 1; - io_ports->nsect_addr = base + 2; - io_ports->lbal_addr = base + 3; - io_ports->lbam_addr = base + 4; - io_ports->lbah_addr = base + 5; - io_ports->device_addr = base + 6; - io_ports->status_addr = base + 7; - io_ports->ctl_addr = base + 10; - - if (pdev_is_sata(dev)) { - base = (unsigned long)addr; - if (ch) - base += 0x80; - hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104; - hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108; - hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100; - } - - hwif->irq = dev->irq; - - hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00); -} - -static int is_dev_seagate_sata(ide_drive_t *drive) -{ - const char *s = (const char *)&drive->id[ATA_ID_PROD]; - unsigned len = strnlen(s, ATA_ID_PROD_LEN); - - if ((len > 4) && (!memcmp(s, "ST", 2))) - if ((!memcmp(s + len - 2, "AS", 2)) || - (!memcmp(s + len - 3, "ASL", 3))) { - printk(KERN_INFO "%s: applying pessimistic Seagate " - "errata fix\n", drive->name); - return 1; - } - - return 0; -} - -/** - * sil_quirkproc - post probe fixups - * @drive: drive - * - * Called after drive probe we use this to decide whether the - * Seagate fixup must be applied. This used to be in init_iops but - * that can occur before we know what drives are present. - */ - -static void sil_quirkproc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - - /* Try and rise the rqsize */ - if (!is_sata(hwif) || !is_dev_seagate_sata(drive)) - hwif->rqsize = 128; -} - -/** - * init_iops_siimage - set up iops - * @hwif: interface to set up - * - * Do the basic setup for the SIIMAGE hardware interface - * and then do the MMIO setup if we can. This is the first - * look in we get for setting up the hwif so that we - * can get the iops right before using them. - */ - -static void __devinit init_iops_siimage(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - - hwif->hwif_data = NULL; - - /* Pessimal until we finish probing */ - hwif->rqsize = 15; - - if (host->host_priv) - init_mmio_iops_siimage(hwif); -} - -/** - * sil_cable_detect - cable detection - * @hwif: interface to check - * - * Check for the presence of an ATA66 capable cable on the interface. - */ - -static u8 sil_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long addr = siimage_selreg(hwif, 0); - u8 ata66 = sil_ioread8(dev, addr); - - return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; -} - -static const struct ide_port_ops sil_pata_port_ops = { - .set_pio_mode = sil_set_pio_mode, - .set_dma_mode = sil_set_dma_mode, - .quirkproc = sil_quirkproc, - .udma_filter = sil_pata_udma_filter, - .cable_detect = sil_cable_detect, -}; - -static const struct ide_port_ops sil_sata_port_ops = { - .set_pio_mode = sil_set_pio_mode, - .set_dma_mode = sil_set_dma_mode, - .reset_poll = sil_sata_reset_poll, - .pre_reset = sil_sata_pre_reset, - .quirkproc = sil_quirkproc, - .udma_filter = sil_sata_udma_filter, - .cable_detect = sil_cable_detect, -}; - -static const struct ide_dma_ops sil_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = ide_dma_end, - .dma_test_irq = siimage_dma_test_irq, - .dma_timeout = ide_dma_timeout, - .dma_lost_irq = ide_dma_lost_irq, -}; - -#define DECLARE_SII_DEV(p_ops) \ - { \ - .name = DRV_NAME, \ - .init_chipset = init_chipset_siimage, \ - .init_iops = init_iops_siimage, \ - .port_ops = p_ops, \ - .dma_ops = &sil_dma_ops, \ - .pio_mask = ATA_PIO4, \ - .mwdma_mask = ATA_MWDMA2, \ - .udma_mask = ATA_UDMA6, \ - } - -static const struct ide_port_info siimage_chipsets[] __devinitdata = { - /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops), - /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops) -}; - -/** - * siimage_init_one - PCI layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an SiI680 or SiI3112 controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int __devinit siimage_init_one(struct pci_dev *dev, - const struct pci_device_id *id) -{ - void __iomem *ioaddr = NULL; - resource_size_t bar5 = pci_resource_start(dev, 5); - unsigned long barsize = pci_resource_len(dev, 5); - int rc; - struct ide_port_info d; - u8 idx = id->driver_data; - u8 BA5_EN; - - d = siimage_chipsets[idx]; - - if (idx) { - static int first = 1; - - if (first) { - printk(KERN_INFO DRV_NAME ": For full SATA support you " - "should use the libata sata_sil module.\n"); - first = 0; - } - - d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - } - - rc = pci_enable_device(dev); - if (rc) - return rc; - - pci_read_config_byte(dev, 0x8A, &BA5_EN); - if ((BA5_EN & 0x01) || bar5) { - /* - * Drop back to PIO if we can't map the MMIO. Some systems - * seem to get terminally confused in the PCI spaces. - */ - if (!request_mem_region(bar5, barsize, d.name)) { - printk(KERN_WARNING DRV_NAME " %s: MMIO ports not " - "available\n", pci_name(dev)); - } else { - ioaddr = ioremap(bar5, barsize); - if (ioaddr == NULL) - release_mem_region(bar5, barsize); - } - } - - rc = ide_pci_init_one(dev, &d, ioaddr); - if (rc) { - if (ioaddr) { - iounmap(ioaddr); - release_mem_region(bar5, barsize); - } - pci_disable_device(dev); - } - - return rc; -} - -static void __devexit siimage_remove(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - void __iomem *ioaddr = host->host_priv; - - ide_pci_remove(dev); - - if (ioaddr) { - resource_size_t bar5 = pci_resource_start(dev, 5); - unsigned long barsize = pci_resource_len(dev, 5); - - iounmap(ioaddr); - release_mem_region(bar5, barsize); - } - - pci_disable_device(dev); -} - -static const struct pci_device_id siimage_pci_tbl[] = { - { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), 0 }, -#ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112), 1 }, - { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 }, -#endif - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, siimage_pci_tbl); - -static struct pci_driver siimage_pci_driver = { - .name = "SiI_IDE", - .id_table = siimage_pci_tbl, - .probe = siimage_init_one, - .remove = __devexit_p(siimage_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init siimage_ide_init(void) -{ - return ide_pci_register_driver(&siimage_pci_driver); -} - -static void __exit siimage_ide_exit(void) -{ - pci_unregister_driver(&siimage_pci_driver); -} - -module_init(siimage_ide_init); -module_exit(siimage_ide_exit); - -MODULE_AUTHOR("Andre Hedrick, Alan Cox"); -MODULE_DESCRIPTION("PCI driver module for SiI IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c deleted file mode 100644 index ad32e18c5ba..00000000000 --- a/drivers/ide/pci/sis5513.c +++ /dev/null @@ -1,641 +0,0 @@ -/* - * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer - * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * - * May be copied or modified under the terms of the GNU General Public License - * - * - * Thanks : - * - * SiS Taiwan : for direct support and hardware. - * Daniela Engert : for initial ATA100 advices and numerous others. - * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : - * for checking code correctness, providing patches. - * - * - * Original tests and design on the SiS620 chipset. - * ATA100 tests and design on the SiS735 chipset. - * ATA16/33 support from specs - * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw> - * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz> - * - * Documentation: - * SiS chipset documentation available under NDA to companies only - * (not to individuals). - */ - -/* - * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original - * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511 - * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip. - * - * Later SiS chipsets integrated the 5513 functionality into the NorthBridge, - * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We - * can figure out that we have a more modern and more capable 5513 by looking - * for the respective NorthBridge IDs. - * - * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513 - * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI - * ID, while the now ATA-133 capable 5513 still has the same PCI ID. - * Fortunately the 5513 can be 'unmasked' by fiddling with some config space - * bits, changing its device id to the true one - 5517 for 961 and 5518 for - * 962/963. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> - -#define DRV_NAME "sis5513" - -/* registers layout and init values are chipset family dependant */ - -#define ATA_16 0x01 -#define ATA_33 0x02 -#define ATA_66 0x03 -#define ATA_100a 0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */ -#define ATA_100 0x05 -#define ATA_133a 0x06 /* SiS961b with 133 support */ -#define ATA_133 0x07 /* SiS962/963 */ - -static u8 chipset_family; - -/* - * Devices supported - */ -static const struct { - const char *name; - u16 host_id; - u8 chipset_family; - u8 flags; -} SiSHostChipInfo[] = { - { "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 }, - { "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 }, - { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 }, - { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, - { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, - { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 }, - { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 }, - { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 }, - - { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a }, - { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a }, - - { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 }, - { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 }, - { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 }, - { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 }, - { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 }, - - { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 }, - { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 }, - { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 }, - { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 }, - { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 }, - { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 }, - - { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 }, - { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 }, - { "SiS5517", PCI_DEVICE_ID_SI_5517, ATA_16 }, - { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 }, -}; - -/* Cycle time bits and values vary across chip dma capabilities - These three arrays hold the register layout and the values to set. - Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */ - -/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */ -static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 }; -static u8 cycle_time_range[] = { 0, 0, 2, 3, 3, 4, 4 }; -static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { - { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ - { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ - { 3, 2, 1, 0, 0, 0, 0 }, /* ATA_33 */ - { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_66 */ - { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific), - different cycle_time range and offset */ - { 11, 7, 5, 4, 2, 1, 0 }, /* ATA_100 */ - { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */ - { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */ -}; -/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133 - See SiS962 data sheet for more detail */ -static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { - { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ - { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ - { 2, 1, 1, 0, 0, 0, 0 }, - { 4, 3, 2, 1, 0, 0, 0 }, - { 4, 3, 2, 1, 0, 0, 0 }, - { 6, 4, 3, 1, 1, 1, 0 }, - { 9, 6, 4, 2, 2, 2, 2 }, - { 9, 6, 4, 2, 2, 2, 2 }, -}; -/* Initialize time, Active time, Recovery time vary across - IDE clock settings. These 3 arrays hold the register value - for PIO0/1/2/3/4 and DMA0/1/2 mode in order */ -static u8 ini_time_value[][8] = { - { 0, 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0, 0 }, - { 2, 1, 0, 0, 0, 1, 0, 0 }, - { 4, 3, 1, 1, 1, 3, 1, 1 }, - { 4, 3, 1, 1, 1, 3, 1, 1 }, - { 6, 4, 2, 2, 2, 4, 2, 2 }, - { 9, 6, 3, 3, 3, 6, 3, 3 }, - { 9, 6, 3, 3, 3, 6, 3, 3 }, -}; -static u8 act_time_value[][8] = { - { 0, 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0, 0 }, - { 9, 9, 9, 2, 2, 7, 2, 2 }, - { 19, 19, 19, 5, 4, 14, 5, 4 }, - { 19, 19, 19, 5, 4, 14, 5, 4 }, - { 28, 28, 28, 7, 6, 21, 7, 6 }, - { 38, 38, 38, 10, 9, 28, 10, 9 }, - { 38, 38, 38, 10, 9, 28, 10, 9 }, -}; -static u8 rco_time_value[][8] = { - { 0, 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0, 0 }, - { 9, 2, 0, 2, 0, 7, 1, 1 }, - { 19, 5, 1, 5, 2, 16, 3, 2 }, - { 19, 5, 1, 5, 2, 16, 3, 2 }, - { 30, 9, 3, 9, 4, 25, 6, 4 }, - { 40, 12, 4, 12, 5, 34, 12, 5 }, - { 40, 12, 4, 12, 5, 34, 12, 5 }, -}; - -/* - * Printing configuration - */ -/* Used for chipset type printing at boot time */ -static char *chipset_capability[] = { - "ATA", "ATA 16", - "ATA 33", "ATA 66", - "ATA 100 (1st gen)", "ATA 100 (2nd gen)", - "ATA 133 (1st gen)", "ATA 133 (2nd gen)" -}; - -/* - * Configuration functions - */ - -static u8 sis_ata133_get_base(ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u32 reg54 = 0; - - pci_read_config_dword(dev, 0x54, ®54); - - return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4; -} - -static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u16 t1 = 0; - u8 drive_pci = 0x40 + drive->dn * 2; - - const u16 pio_timings[] = { 0x000, 0x607, 0x404, 0x303, 0x301 }; - const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 }; - - pci_read_config_word(dev, drive_pci, &t1); - - /* clear active/recovery timings */ - t1 &= ~0x070f; - if (mode >= XFER_MW_DMA_0) { - if (chipset_family > ATA_16) - t1 &= ~0x8000; /* disable UDMA */ - t1 |= mwdma_timings[mode - XFER_MW_DMA_0]; - } else - t1 |= pio_timings[mode - XFER_PIO_0]; - - pci_write_config_word(dev, drive_pci, t1); -} - -static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u8 t1, drive_pci = 0x40 + drive->dn * 2; - - /* timing bits: 7:4 active 3:0 recovery */ - const u8 pio_timings[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; - const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 }; - - if (mode >= XFER_MW_DMA_0) { - u8 t2 = 0; - - pci_read_config_byte(dev, drive_pci, &t2); - t2 &= ~0x80; /* disable UDMA */ - pci_write_config_byte(dev, drive_pci, t2); - - t1 = mwdma_timings[mode - XFER_MW_DMA_0]; - } else - t1 = pio_timings[mode - XFER_PIO_0]; - - pci_write_config_byte(dev, drive_pci + 1, t1); -} - -static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u32 t1 = 0; - u8 drive_pci = sis_ata133_get_base(drive), clk, idx; - - pci_read_config_dword(dev, drive_pci, &t1); - - t1 &= 0xc0c00fff; - clk = (t1 & 0x08) ? ATA_133 : ATA_100; - if (mode >= XFER_MW_DMA_0) { - t1 &= ~0x04; /* disable UDMA */ - idx = mode - XFER_MW_DMA_0 + 5; - } else - idx = mode - XFER_PIO_0; - t1 |= ini_time_value[clk][idx] << 12; - t1 |= act_time_value[clk][idx] << 16; - t1 |= rco_time_value[clk][idx] << 24; - - pci_write_config_dword(dev, drive_pci, t1); -} - -static void sis_program_timings(ide_drive_t *drive, const u8 mode) -{ - if (chipset_family < ATA_100) /* ATA_16/33/66/100a */ - sis_ata16_program_timings(drive, mode); - else if (chipset_family < ATA_133) /* ATA_100/133a */ - sis_ata100_program_timings(drive, mode); - else /* ATA_133 */ - sis_ata133_program_timings(drive, mode); -} - -static void config_drive_art_rwp(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 reg4bh = 0; - u8 rw_prefetch = 0; - - pci_read_config_byte(dev, 0x4b, ®4bh); - - if (drive->media == ide_disk) - rw_prefetch = 0x11 << drive->dn; - - if ((reg4bh & (0x11 << drive->dn)) != rw_prefetch) - pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch); -} - -static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - config_drive_art_rwp(drive); - sis_program_timings(drive, XFER_PIO_0 + pio); -} - -static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u32 regdw = 0; - u8 drive_pci = sis_ata133_get_base(drive), clk, idx; - - pci_read_config_dword(dev, drive_pci, ®dw); - - regdw |= 0x04; - regdw &= 0xfffff00f; - /* check if ATA133 enable */ - clk = (regdw & 0x08) ? ATA_133 : ATA_100; - idx = mode - XFER_UDMA_0; - regdw |= cycle_time_value[clk][idx] << 4; - regdw |= cvs_time_value[clk][idx] << 8; - - pci_write_config_dword(dev, drive_pci, regdw); -} - -static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family; - - pci_read_config_byte(dev, drive_pci + 1, ®); - - /* force the UDMA bit on if we want to use UDMA */ - reg |= 0x80; - /* clean reg cycle time bits */ - reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]); - /* set reg cycle time bits */ - reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i]; - - pci_write_config_byte(dev, drive_pci + 1, reg); -} - -static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) -{ - if (chipset_family >= ATA_133) /* ATA_133 */ - sis_ata133_program_udma_timings(drive, mode); - else /* ATA_33/66/100a/100/133a */ - sis_ata33_program_udma_timings(drive, mode); -} - -static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - if (speed >= XFER_UDMA_0) - sis_program_udma_timings(drive, speed); - else - sis_program_timings(drive, speed); -} - -static u8 sis_ata133_udma_filter(ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u32 regdw = 0; - u8 drive_pci = sis_ata133_get_base(drive); - - pci_read_config_dword(dev, drive_pci, ®dw); - - /* if ATA133 disable, we should not set speed above UDMA5 */ - return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5; -} - -static int __devinit sis_find_family(struct pci_dev *dev) -{ - struct pci_dev *host; - int i = 0; - - chipset_family = 0; - - for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) { - - host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL); - - if (!host) - continue; - - chipset_family = SiSHostChipInfo[i].chipset_family; - - /* Special case for SiS630 : 630S/ET is ATA_100a */ - if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) { - if (host->revision >= 0x30) - chipset_family = ATA_100a; - } - pci_dev_put(host); - - printk(KERN_INFO DRV_NAME " %s: %s %s controller\n", - pci_name(dev), SiSHostChipInfo[i].name, - chipset_capability[chipset_family]); - } - - if (!chipset_family) { /* Belongs to pci-quirks */ - - u32 idemisc; - u16 trueid; - - /* Disable ID masking and register remapping */ - pci_read_config_dword(dev, 0x54, &idemisc); - pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff)); - pci_read_config_word(dev, PCI_DEVICE_ID, &trueid); - pci_write_config_dword(dev, 0x54, idemisc); - - if (trueid == 0x5518) { - printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n", - pci_name(dev)); - chipset_family = ATA_133; - - /* Check for 5513 compability mapping - * We must use this, else the port enabled code will fail, - * as it expects the enablebits at 0x4a. - */ - if ((idemisc & 0x40000000) == 0) { - pci_write_config_dword(dev, 0x54, idemisc | 0x40000000); - printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n", - pci_name(dev)); - } - } - } - - if (!chipset_family) { /* Belongs to pci-quirks */ - - struct pci_dev *lpc_bridge; - u16 trueid; - u8 prefctl; - u8 idecfg; - - pci_read_config_byte(dev, 0x4a, &idecfg); - pci_write_config_byte(dev, 0x4a, idecfg | 0x10); - pci_read_config_word(dev, PCI_DEVICE_ID, &trueid); - pci_write_config_byte(dev, 0x4a, idecfg); - - if (trueid == 0x5517) { /* SiS 961/961B */ - - lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */ - pci_read_config_byte(dev, 0x49, &prefctl); - pci_dev_put(lpc_bridge); - - if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { - printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n", - pci_name(dev)); - chipset_family = ATA_133a; - } else { - printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n", - pci_name(dev)); - chipset_family = ATA_100; - } - } - } - - return chipset_family; -} - -static unsigned int init_chipset_sis5513(struct pci_dev *dev) -{ - /* Make general config ops here - 1/ tell IDE channels to operate in Compatibility mode only - 2/ tell old chips to allow per drive IDE timings */ - - u8 reg; - u16 regw; - - switch (chipset_family) { - case ATA_133: - /* SiS962 operation mode */ - pci_read_config_word(dev, 0x50, ®w); - if (regw & 0x08) - pci_write_config_word(dev, 0x50, regw&0xfff7); - pci_read_config_word(dev, 0x52, ®w); - if (regw & 0x08) - pci_write_config_word(dev, 0x52, regw&0xfff7); - break; - case ATA_133a: - case ATA_100: - /* Fixup latency */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); - /* Set compatibility bit */ - pci_read_config_byte(dev, 0x49, ®); - if (!(reg & 0x01)) - pci_write_config_byte(dev, 0x49, reg|0x01); - break; - case ATA_100a: - case ATA_66: - /* Fixup latency */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10); - - /* On ATA_66 chips the bit was elsewhere */ - pci_read_config_byte(dev, 0x52, ®); - if (!(reg & 0x04)) - pci_write_config_byte(dev, 0x52, reg|0x04); - break; - case ATA_33: - /* On ATA_33 we didn't have a single bit to set */ - pci_read_config_byte(dev, 0x09, ®); - if ((reg & 0x0f) != 0x00) - pci_write_config_byte(dev, 0x09, reg&0xf0); - case ATA_16: - /* force per drive recovery and active timings - needed on ATA_33 and below chips */ - pci_read_config_byte(dev, 0x52, ®); - if (!(reg & 0x08)) - pci_write_config_byte(dev, 0x52, reg|0x08); - break; - } - - return 0; -} - -struct sis_laptop { - u16 device; - u16 subvendor; - u16 subdevice; -}; - -static const struct sis_laptop sis_laptop[] = { - /* devid, subvendor, subdev */ - { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ - { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */ - { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ - /* end marker */ - { 0, } -}; - -static u8 sis_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *pdev = to_pci_dev(hwif->dev); - const struct sis_laptop *lap = &sis_laptop[0]; - u8 ata66 = 0; - - while (lap->device) { - if (lap->device == pdev->device && - lap->subvendor == pdev->subsystem_vendor && - lap->subdevice == pdev->subsystem_device) - return ATA_CBL_PATA40_SHORT; - lap++; - } - - if (chipset_family >= ATA_133) { - u16 regw = 0; - u16 reg_addr = hwif->channel ? 0x52: 0x50; - pci_read_config_word(pdev, reg_addr, ®w); - ata66 = (regw & 0x8000) ? 0 : 1; - } else if (chipset_family >= ATA_66) { - u8 reg48h = 0; - u8 mask = hwif->channel ? 0x20 : 0x10; - pci_read_config_byte(pdev, 0x48, ®48h); - ata66 = (reg48h & mask) ? 0 : 1; - } - - return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; -} - -static const struct ide_port_ops sis_port_ops = { - .set_pio_mode = sis_set_pio_mode, - .set_dma_mode = sis_set_dma_mode, - .cable_detect = sis_cable_detect, -}; - -static const struct ide_port_ops sis_ata133_port_ops = { - .set_pio_mode = sis_set_pio_mode, - .set_dma_mode = sis_set_dma_mode, - .udma_filter = sis_ata133_udma_filter, - .cable_detect = sis_cable_detect, -}; - -static const struct ide_port_info sis5513_chipset __devinitdata = { - .name = DRV_NAME, - .init_chipset = init_chipset_sis5513, - .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, -}; - -static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_port_info d = sis5513_chipset; - u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; - int rc; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - if (sis_find_family(dev) == 0) - return -ENOTSUPP; - - if (chipset_family >= ATA_133) - d.port_ops = &sis_ata133_port_ops; - else - d.port_ops = &sis_port_ops; - - d.udma_mask = udma_rates[chipset_family]; - - return ide_pci_init_one(dev, &d, NULL); -} - -static void __devexit sis5513_remove(struct pci_dev *dev) -{ - ide_pci_remove(dev); - pci_disable_device(dev); -} - -static const struct pci_device_id sis5513_pci_tbl[] = { - { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 }, - { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 }, - { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_1180), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl); - -static struct pci_driver sis5513_pci_driver = { - .name = "SIS_IDE", - .id_table = sis5513_pci_tbl, - .probe = sis5513_init_one, - .remove = __devexit_p(sis5513_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init sis5513_ide_init(void) -{ - return ide_pci_register_driver(&sis5513_pci_driver); -} - -static void __exit sis5513_ide_exit(void) -{ - pci_unregister_driver(&sis5513_pci_driver); -} - -module_init(sis5513_ide_init); -module_exit(sis5513_ide_exit); - -MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik"); -MODULE_DESCRIPTION("PCI driver module for SIS IDE"); -MODULE_LICENSE("GPL"); - -/* - * TODO: - * - CLEANUP - * - More checks in the config registers (force values instead of - * relying on the BIOS setting them correctly). - * - Further optimisations ? - * . for example ATA66+ regs 0x48 & 0x4A - */ diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c deleted file mode 100644 index 84dc33602ff..00000000000 --- a/drivers/ide/pci/sl82c105.c +++ /dev/null @@ -1,371 +0,0 @@ -/* - * SL82C105/Winbond 553 IDE driver - * - * Maintainer unknown. - * - * Drive tuning added from Rebel.com's kernel sources - * -- Russell King (15/11/98) linux@arm.linux.org.uk - * - * Merge in Russell's HW workarounds, fix various problems - * with the timing registers setup. - * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org - * - * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> - -#include <asm/io.h> - -#define DRV_NAME "sl82c105" - -#undef DEBUG - -#ifdef DEBUG -#define DBG(arg) printk arg -#else -#define DBG(fmt,...) -#endif -/* - * SL82C105 PCI config register 0x40 bits. - */ -#define CTRL_IDE_IRQB (1 << 30) -#define CTRL_IDE_IRQA (1 << 28) -#define CTRL_LEGIRQ (1 << 11) -#define CTRL_P1F16 (1 << 5) -#define CTRL_P1EN (1 << 4) -#define CTRL_P0F16 (1 << 1) -#define CTRL_P0EN (1 << 0) - -/* - * Convert a PIO mode and cycle time to the required on/off times - * for the interface. This has protection against runaway timings. - */ -static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) -{ - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - unsigned int cmd_on, cmd_off; - u8 iordy = 0; - - cmd_on = (t->active + 29) / 30; - cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30; - - if (cmd_on == 0) - cmd_on = 1; - - if (cmd_off == 0) - cmd_off = 1; - - if (pio > 2 || ata_id_has_iordy(drive->id)) - iordy = 0x40; - - return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy; -} - -/* - * Configure the chipset for PIO mode. - */ -static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int reg = 0x44 + drive->dn * 4; - u16 drv_ctrl; - - drv_ctrl = get_pio_timings(drive, pio); - - /* - * Store the PIO timings so that we can restore them - * in case DMA will be turned off... - */ - drive->drive_data &= 0xffff0000; - drive->drive_data |= drv_ctrl; - - pci_write_config_word(dev, reg, drv_ctrl); - pci_read_config_word (dev, reg, &drv_ctrl); - - printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name, - ide_xfer_verbose(pio + XFER_PIO_0), - ide_pio_cycle_time(drive, pio), drv_ctrl); -} - -/* - * Configure the chipset for DMA mode. - */ -static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; - u16 drv_ctrl; - - DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n", - drive->name, ide_xfer_verbose(speed))); - - drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; - - /* - * Store the DMA timings so that we can actually program - * them when DMA will be turned on... - */ - drive->drive_data &= 0x0000ffff; - drive->drive_data |= (unsigned long)drv_ctrl << 16; -} - -/* - * The SL82C105 holds off all IDE interrupts while in DMA mode until - * all DMA activity is completed. Sometimes this causes problems (eg, - * when the drive wants to report an error condition). - * - * 0x7e is a "chip testing" register. Bit 2 resets the DMA controller - * state machine. We need to kick this to work around various bugs. - */ -static inline void sl82c105_reset_host(struct pci_dev *dev) -{ - u16 val; - - pci_read_config_word(dev, 0x7e, &val); - pci_write_config_word(dev, 0x7e, val | (1 << 2)); - pci_write_config_word(dev, 0x7e, val & ~(1 << 2)); -} - -/* - * If we get an IRQ timeout, it might be that the DMA state machine - * got confused. Fix from Todd Inglett. Details from Winbond. - * - * This function is called when the IDE timer expires, the drive - * indicates that it is READY, and we were waiting for DMA to complete. - */ -static void sl82c105_dma_lost_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; - u8 dma_cmd; - - printk("sl82c105: lost IRQ, resetting host\n"); - - /* - * Check the raw interrupt from the drive. - */ - pci_read_config_dword(dev, 0x40, &val); - if (val & mask) - printk("sl82c105: drive was requesting IRQ, but host lost it\n"); - - /* - * Was DMA enabled? If so, disable it - we're resetting the - * host. The IDE layer will be handling the drive for us. - */ - dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - if (dma_cmd & 1) { - outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); - printk("sl82c105: DMA was enabled\n"); - } - - sl82c105_reset_host(dev); -} - -/* - * ATAPI devices can cause the SL82C105 DMA state machine to go gaga. - * Winbond recommend that the DMA state machine is reset prior to - * setting the bus master DMA enable bit. - * - * The generic IDE core will have disabled the BMEN bit before this - * function is called. - */ -static void sl82c105_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - int reg = 0x44 + drive->dn * 4; - - DBG(("%s(drive:%s)\n", __func__, drive->name)); - - pci_write_config_word(dev, reg, drive->drive_data >> 16); - - sl82c105_reset_host(dev); - ide_dma_start(drive); -} - -static void sl82c105_dma_timeout(ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - - DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name)); - - sl82c105_reset_host(dev); - ide_dma_timeout(drive); -} - -static int sl82c105_dma_end(ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int reg = 0x44 + drive->dn * 4; - int ret; - - DBG(("%s(drive:%s)\n", __func__, drive->name)); - - ret = ide_dma_end(drive); - - pci_write_config_word(dev, reg, drive->drive_data); - - return ret; -} - -/* - * ATA reset will clear the 16 bits mode in the control - * register, we need to reprogram it - */ -static void sl82c105_resetproc(ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u32 val; - - DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); - - pci_read_config_dword(dev, 0x40, &val); - val |= (CTRL_P1F16 | CTRL_P0F16); - pci_write_config_dword(dev, 0x40, val); -} - -/* - * Return the revision of the Winbond bridge - * which this function is part of. - */ -static u8 sl82c105_bridge_revision(struct pci_dev *dev) -{ - struct pci_dev *bridge; - - /* - * The bridge should be part of the same device, but function 0. - */ - bridge = pci_get_bus_and_slot(dev->bus->number, - PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); - if (!bridge) - return -1; - - /* - * Make sure it is a Winbond 553 and is an ISA bridge. - */ - if (bridge->vendor != PCI_VENDOR_ID_WINBOND || - bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || - bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) { - pci_dev_put(bridge); - return -1; - } - /* - * We need to find function 0's revision, not function 1 - */ - pci_dev_put(bridge); - - return bridge->revision; -} - -/* - * Enable the PCI device - * - * --BenH: It's arch fixup code that should enable channels that - * have not been enabled by firmware. I decided we can still enable - * channel 0 here at least, but channel 1 has to be enabled by - * firmware or arch code. We still set both to 16 bits mode. - */ -static unsigned int init_chipset_sl82c105(struct pci_dev *dev) -{ - u32 val; - - DBG(("init_chipset_sl82c105()\n")); - - pci_read_config_dword(dev, 0x40, &val); - val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; - pci_write_config_dword(dev, 0x40, val); - - return dev->irq; -} - -static const struct ide_port_ops sl82c105_port_ops = { - .set_pio_mode = sl82c105_set_pio_mode, - .set_dma_mode = sl82c105_set_dma_mode, - .resetproc = sl82c105_resetproc, -}; - -static const struct ide_dma_ops sl82c105_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = sl82c105_dma_start, - .dma_end = sl82c105_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = sl82c105_dma_lost_irq, - .dma_timeout = sl82c105_dma_timeout, -}; - -static const struct ide_port_info sl82c105_chipset __devinitdata = { - .name = DRV_NAME, - .init_chipset = init_chipset_sl82c105, - .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, - .port_ops = &sl82c105_port_ops, - .dma_ops = &sl82c105_dma_ops, - .host_flags = IDE_HFLAG_IO_32BIT | - IDE_HFLAG_UNMASK_IRQS | -/* FIXME: check for Compatibility mode in generic IDE PCI code */ -#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT) - IDE_HFLAG_FORCE_LEGACY_IRQS | -#endif - IDE_HFLAG_SERIALIZE_DMA | - IDE_HFLAG_NO_AUTODMA, - .pio_mask = ATA_PIO5, - .mwdma_mask = ATA_MWDMA2, -}; - -static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct ide_port_info d = sl82c105_chipset; - u8 rev = sl82c105_bridge_revision(dev); - - if (rev <= 5) { - /* - * Never ever EVER under any circumstances enable - * DMA when the bridge is this old. - */ - printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge " - "revision %d, BM-DMA disabled\n", rev); - d.dma_ops = NULL; - d.mwdma_mask = 0; - d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA; - } - - return ide_pci_init_one(dev, &d, NULL); -} - -static const struct pci_device_id sl82c105_pci_tbl[] = { - { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl); - -static struct pci_driver sl82c105_pci_driver = { - .name = "W82C105_IDE", - .id_table = sl82c105_pci_tbl, - .probe = sl82c105_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init sl82c105_ide_init(void) -{ - return ide_pci_register_driver(&sl82c105_pci_driver); -} - -static void __exit sl82c105_ide_exit(void) -{ - pci_unregister_driver(&sl82c105_pci_driver); -} - -module_init(sl82c105_ide_init); -module_exit(sl82c105_ide_exit); - -MODULE_DESCRIPTION("PCI driver module for W82C105 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c deleted file mode 100644 index 0f759e4ed77..00000000000 --- a/drivers/ide/pci/slc90e66.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> - * - * This is a look-alike variation of the ICH0 PIIX4 Ultra-66, - * but this keeps the ISA-Bridge and slots alive. - * - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "slc90e66" - -static DEFINE_SPINLOCK(slc90e66_lock); - -static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - int is_slave = drive->dn & 1; - int master_port = hwif->channel ? 0x42 : 0x40; - int slave_port = 0x44; - unsigned long flags; - u16 master_data; - u8 slave_data; - int control = 0; - /* ISP RTC */ - static const u8 timings[][2] = { - { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - spin_lock_irqsave(&slc90e66_lock, flags); - pci_read_config_word(dev, master_port, &master_data); - - if (pio > 1) - control |= 1; /* Programmable timing on */ - if (drive->media == ide_disk) - control |= 4; /* Prefetch, post write */ - if (pio > 2) - control |= 2; /* IORDY */ - if (is_slave) { - master_data |= 0x4000; - master_data &= ~0x0070; - if (pio > 1) { - /* Set PPE, IE and TIME */ - master_data |= control << 4; - } - pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= hwif->channel ? 0x0f : 0xf0; - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << - (hwif->channel ? 4 : 0); - } else { - master_data &= ~0x3307; - if (pio > 1) { - /* enable PPE, IE and TIME */ - master_data |= control; - } - master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); - } - pci_write_config_word(dev, master_port, master_data); - if (is_slave) - pci_write_config_byte(dev, slave_port, slave_data); - spin_unlock_irqrestore(&slc90e66_lock, flags); -} - -static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 maslave = hwif->channel ? 0x42 : 0x40; - int sitre = 0, a_speed = 7 << (drive->dn * 4); - int u_speed = 0, u_flag = 1 << drive->dn; - u16 reg4042, reg44, reg48, reg4a; - - pci_read_config_word(dev, maslave, ®4042); - sitre = (reg4042 & 0x4000) ? 1 : 0; - pci_read_config_word(dev, 0x44, ®44); - pci_read_config_word(dev, 0x48, ®48); - pci_read_config_word(dev, 0x4a, ®4a); - - if (speed >= XFER_UDMA_0) { - u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4); - - if (!(reg48 & u_flag)) - pci_write_config_word(dev, 0x48, reg48|u_flag); - /* FIXME: (reg4a & a_speed) ? */ - if ((reg4a & u_speed) != u_speed) { - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - pci_read_config_word(dev, 0x4a, ®4a); - pci_write_config_word(dev, 0x4a, reg4a|u_speed); - } - } else { - const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; - - if (reg48 & u_flag) - pci_write_config_word(dev, 0x48, reg48 & ~u_flag); - if (reg4a & a_speed) - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - - if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; - else - pio = 2; /* only SWDMA2 is allowed */ - - slc90e66_set_pio_mode(drive, pio); - } -} - -static u8 slc90e66_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02; - - pci_read_config_byte(dev, 0x47, ®47); - - /* bit[0(1)]: 0:80, 1:40 */ - return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; -} - -static const struct ide_port_ops slc90e66_port_ops = { - .set_pio_mode = slc90e66_set_pio_mode, - .set_dma_mode = slc90e66_set_dma_mode, - .cable_detect = slc90e66_cable_detect, -}; - -static const struct ide_port_info slc90e66_chipset __devinitdata = { - .name = DRV_NAME, - .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, - .port_ops = &slc90e66_port_ops, - .host_flags = IDE_HFLAG_LEGACY_IRQS, - .pio_mask = ATA_PIO4, - .swdma_mask = ATA_SWDMA2_ONLY, - .mwdma_mask = ATA_MWDMA12_ONLY, - .udma_mask = ATA_UDMA4, -}; - -static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &slc90e66_chipset, NULL); -} - -static const struct pci_device_id slc90e66_pci_tbl[] = { - { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl); - -static struct pci_driver slc90e66_pci_driver = { - .name = "SLC90e66_IDE", - .id_table = slc90e66_pci_tbl, - .probe = slc90e66_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init slc90e66_ide_init(void) -{ - return ide_pci_register_driver(&slc90e66_pci_driver); -} - -static void __exit slc90e66_ide_exit(void) -{ - pci_unregister_driver(&slc90e66_pci_driver); -} - -module_init(slc90e66_ide_init); -module_exit(slc90e66_ide_exit); - -MODULE_AUTHOR("Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c deleted file mode 100644 index 93e2cce4b29..00000000000 --- a/drivers/ide/pci/tc86c001.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Copyright (C) 2002 Toshiba Corporation - * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/ide.h> - -#define DRV_NAME "tc86c001" - -static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); - u16 mode, scr = inw(scr_port); - - switch (speed) { - case XFER_UDMA_4: mode = 0x00c0; break; - case XFER_UDMA_3: mode = 0x00b0; break; - case XFER_UDMA_2: mode = 0x00a0; break; - case XFER_UDMA_1: mode = 0x0090; break; - case XFER_UDMA_0: mode = 0x0080; break; - case XFER_MW_DMA_2: mode = 0x0070; break; - case XFER_MW_DMA_1: mode = 0x0060; break; - case XFER_MW_DMA_0: mode = 0x0050; break; - case XFER_PIO_4: mode = 0x0400; break; - case XFER_PIO_3: mode = 0x0300; break; - case XFER_PIO_2: mode = 0x0200; break; - case XFER_PIO_1: mode = 0x0100; break; - case XFER_PIO_0: - default: mode = 0x0000; break; - } - - scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f; - scr |= mode; - outw(scr, scr_port); -} - -static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - tc86c001_set_mode(drive, XFER_PIO_0 + pio); -} - -/* - * HACKITY HACK - * - * This is a workaround for the limitation 5 of the TC86C001 IDE controller: - * if a DMA transfer terminates prematurely, the controller leaves the device's - * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or - * set the interrupt bit in the DMA status register), thus no PCI interrupt - * will occur until a DMA transfer has been successfully completed. - * - * We work around this by initiating dummy, zero-length DMA transfer on - * a DMA timeout expiration. I found no better way to do this with the current - * IDE core than to temporarily replace a higher level driver's timer expiry - * handler with our own backing up to that handler in case our recovery fails. - */ -static int tc86c001_timer_expiry(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - ide_expiry_t *expiry = ide_get_hwifdata(hwif); - ide_hwgroup_t *hwgroup = HWGROUP(drive); - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - - /* Restore a higher level driver's expiry handler first. */ - hwgroup->expiry = expiry; - - if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */ - unsigned long sc_base = hwif->config_data; - unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04); - u8 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - - printk(KERN_WARNING "%s: DMA interrupt possibly stuck, " - "attempting recovery...\n", drive->name); - - /* Stop DMA */ - outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD); - - /* Setup the dummy DMA transfer */ - outw(0, sc_base + 0x0a); /* Sector Count */ - outw(0, twcr_port); /* Transfer Word Count 1 or 2 */ - - /* Start the dummy DMA transfer */ - - /* clear R_OR_WCTR for write */ - outb(0x00, hwif->dma_base + ATA_DMA_CMD); - /* set START_STOPBM */ - outb(0x01, hwif->dma_base + ATA_DMA_CMD); - - /* - * If an interrupt was pending, it should come thru shortly. - * If not, a higher level driver's expiry handler should - * eventually cause some kind of recovery from the DMA stall. - */ - return WAIT_MIN_SLEEP; - } - - /* Chain to the restored expiry handler if DMA wasn't active. */ - if (likely(expiry != NULL)) - return expiry(drive); - - /* If there was no handler, "emulate" that for ide_timer_expiry()... */ - return -1; -} - -static void tc86c001_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - ide_hwgroup_t *hwgroup = HWGROUP(drive); - unsigned long sc_base = hwif->config_data; - unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04); - unsigned long nsectors = hwgroup->rq->nr_sectors; - - /* - * We have to manually load the sector count and size into - * the appropriate system control registers for DMA to work - * with LBA48 and ATAPI devices... - */ - outw(nsectors, sc_base + 0x0a); /* Sector Count */ - outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */ - - /* Install our timeout expiry hook, saving the current handler... */ - ide_set_hwifdata(hwif, hwgroup->expiry); - hwgroup->expiry = &tc86c001_timer_expiry; - - ide_dma_start(drive); -} - -static u8 tc86c001_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long sc_base = pci_resource_start(dev, 5); - u16 scr1 = inw(sc_base + 0x00); - - /* - * System Control 1 Register bit 13 (PDIAGN): - * 0=80-pin cable, 1=40-pin cable - */ - return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; -} - -static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long sc_base = pci_resource_start(dev, 5); - u16 scr1 = inw(sc_base + 0x00); - - /* System Control 1 Register bit 15 (Soft Reset) set */ - outw(scr1 | 0x8000, sc_base + 0x00); - - /* System Control 1 Register bit 14 (FIFO Reset) set */ - outw(scr1 | 0x4000, sc_base + 0x00); - - /* System Control 1 Register: reset clear */ - outw(scr1 & ~0xc000, sc_base + 0x00); - - /* Store the system control register base for convenience... */ - hwif->config_data = sc_base; - - if (!hwif->dma_base) - return; - - /* - * Sector Count Control Register bits 0 and 1 set: - * software sets Sector Count Register for master and slave device - */ - outw(0x0003, sc_base + 0x0c); - - /* Sector Count Register limit */ - hwif->rqsize = 0xffff; -} - -static const struct ide_port_ops tc86c001_port_ops = { - .set_pio_mode = tc86c001_set_pio_mode, - .set_dma_mode = tc86c001_set_mode, - .cable_detect = tc86c001_cable_detect, -}; - -static const struct ide_dma_ops tc86c001_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = tc86c001_dma_start, - .dma_end = ide_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info tc86c001_chipset __devinitdata = { - .name = DRV_NAME, - .init_hwif = init_hwif_tc86c001, - .port_ops = &tc86c001_port_ops, - .dma_ops = &tc86c001_dma_ops, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA4, -}; - -static int __devinit tc86c001_init_one(struct pci_dev *dev, - const struct pci_device_id *id) -{ - int rc; - - rc = pci_enable_device(dev); - if (rc) - goto out; - - rc = pci_request_region(dev, 5, DRV_NAME); - if (rc) { - printk(KERN_ERR DRV_NAME ": system control regs already in use"); - goto out_disable; - } - - rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL); - if (rc) - goto out_release; - - goto out; - -out_release: - pci_release_region(dev, 5); -out_disable: - pci_disable_device(dev); -out: - return rc; -} - -static void __devexit tc86c001_remove(struct pci_dev *dev) -{ - ide_pci_remove(dev); - pci_release_region(dev, 5); - pci_disable_device(dev); -} - -static const struct pci_device_id tc86c001_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 }, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl); - -static struct pci_driver tc86c001_pci_driver = { - .name = "TC86C001", - .id_table = tc86c001_pci_tbl, - .probe = tc86c001_init_one, - .remove = __devexit_p(tc86c001_remove), -}; - -static int __init tc86c001_ide_init(void) -{ - return ide_pci_register_driver(&tc86c001_pci_driver); -} - -static void __exit tc86c001_ide_exit(void) -{ - pci_unregister_driver(&tc86c001_pci_driver); -} - -module_init(tc86c001_ide_init); -module_exit(tc86c001_ide_exit); - -MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); -MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c deleted file mode 100644 index b6ff40336aa..00000000000 --- a/drivers/ide/pci/triflex.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * IDE Chipset driver for the Compaq TriFlex IDE controller. - * - * Known to work with the Compaq Workstation 5x00 series. - * - * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. - * Author: Torben Mathiasen <torben.mathiasen@hp.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Loosely based on the piix & svwks drivers. - * - * Documentation: - * Not publically available. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define DRV_NAME "triflex" - -static void triflex_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u32 triflex_timings = 0; - u16 timing = 0; - u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1; - - pci_read_config_dword(dev, channel_offset, &triflex_timings); - - switch(speed) { - case XFER_MW_DMA_2: - timing = 0x0103; - break; - case XFER_MW_DMA_1: - timing = 0x0203; - break; - case XFER_MW_DMA_0: - timing = 0x0808; - break; - case XFER_SW_DMA_2: - case XFER_SW_DMA_1: - case XFER_SW_DMA_0: - timing = 0x0f0f; - break; - case XFER_PIO_4: - timing = 0x0202; - break; - case XFER_PIO_3: - timing = 0x0204; - break; - case XFER_PIO_2: - timing = 0x0404; - break; - case XFER_PIO_1: - timing = 0x0508; - break; - case XFER_PIO_0: - timing = 0x0808; - break; - } - - triflex_timings &= ~(0xFFFF << (16 * unit)); - triflex_timings |= (timing << (16 * unit)); - - pci_write_config_dword(dev, channel_offset, triflex_timings); -} - -static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - triflex_set_mode(drive, XFER_PIO_0 + pio); -} - -static const struct ide_port_ops triflex_port_ops = { - .set_pio_mode = triflex_set_pio_mode, - .set_dma_mode = triflex_set_mode, -}; - -static const struct ide_port_info triflex_device __devinitdata = { - .name = DRV_NAME, - .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, - .port_ops = &triflex_port_ops, - .pio_mask = ATA_PIO4, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, -}; - -static int __devinit triflex_init_one(struct pci_dev *dev, - const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &triflex_device, NULL); -} - -static const struct pci_device_id triflex_pci_tbl[] = { - { PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); - -static struct pci_driver triflex_pci_driver = { - .name = "TRIFLEX_IDE", - .id_table = triflex_pci_tbl, - .probe = triflex_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init triflex_ide_init(void) -{ - return ide_pci_register_driver(&triflex_pci_driver); -} - -static void __exit triflex_ide_exit(void) -{ - pci_unregister_driver(&triflex_pci_driver); -} - -module_init(triflex_ide_init); -module_exit(triflex_ide_exit); - -MODULE_AUTHOR("Torben Mathiasen"); -MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE"); -MODULE_LICENSE("GPL"); - - diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c deleted file mode 100644 index 75ea6152656..00000000000 --- a/drivers/ide/pci/trm290.c +++ /dev/null @@ -1,375 +0,0 @@ -/* - * Copyright (c) 1997-1998 Mark Lord - * Copyright (c) 2007 MontaVista Software, Inc. <source@mvista.com> - * - * May be copied or modified under the terms of the GNU General Public License - * - * June 22, 2004 - get rid of check_region - * - Jesper Juhl - * - */ - -/* - * This module provides support for the bus-master IDE DMA function - * of the Tekram TRM290 chip, used on a variety of PCI IDE add-on boards, - * including a "Precision Instruments" board. The TRM290 pre-dates - * the sff-8038 standard (ide-dma.c) by a few months, and differs - * significantly enough to warrant separate routines for some functions, - * while re-using others from ide-dma.c. - * - * EXPERIMENTAL! It works for me (a sample of one). - * - * Works reliably for me in DMA mode (READs only), - * DMA WRITEs are disabled by default (see #define below); - * - * DMA is not enabled automatically for this chipset, - * but can be turned on manually (with "hdparm -d1") at run time. - * - * I need volunteers with "spare" drives for further testing - * and development, and maybe to help figure out the peculiarities. - * Even knowing the registers (below), some things behave strangely. - */ - -#define TRM290_NO_DMA_WRITES /* DMA writes seem unreliable sometimes */ - -/* - * TRM-290 PCI-IDE2 Bus Master Chip - * ================================ - * The configuration registers are addressed in normal I/O port space - * and are used as follows: - * - * trm290_base depends on jumper settings, and is probed for by ide-dma.c - * - * trm290_base+2 when WRITTEN: chiptest register (byte, write-only) - * bit7 must always be written as "1" - * bits6-2 undefined - * bit1 1=legacy_compatible_mode, 0=native_pci_mode - * bit0 1=test_mode, 0=normal(default) - * - * trm290_base+2 when READ: status register (byte, read-only) - * bits7-2 undefined - * bit1 channel0 busmaster interrupt status 0=none, 1=asserted - * bit0 channel0 interrupt status 0=none, 1=asserted - * - * trm290_base+3 Interrupt mask register - * bits7-5 undefined - * bit4 legacy_header: 1=present, 0=absent - * bit3 channel1 busmaster interrupt status 0=none, 1=asserted (read only) - * bit2 channel1 interrupt status 0=none, 1=asserted (read only) - * bit1 channel1 interrupt mask: 1=masked, 0=unmasked(default) - * bit0 channel0 interrupt mask: 1=masked, 0=unmasked(default) - * - * trm290_base+1 "CPR" Config Pointer Register (byte) - * bit7 1=autoincrement CPR bits 2-0 after each access of CDR - * bit6 1=min. 1 wait-state posted write cycle (default), 0=0 wait-state - * bit5 0=enabled master burst access (default), 1=disable (write only) - * bit4 PCI DEVSEL# timing select: 1=medium(default), 0=fast - * bit3 0=primary IDE channel, 1=secondary IDE channel - * bits2-0 register index for accesses through CDR port - * - * trm290_base+0 "CDR" Config Data Register (word) - * two sets of seven config registers, - * selected by CPR bit 3 (channel) and CPR bits 2-0 (index 0 to 6), - * each index defined below: - * - * Index-0 Base address register for command block (word) - * defaults: 0x1f0 for primary, 0x170 for secondary - * - * Index-1 general config register (byte) - * bit7 1=DMA enable, 0=DMA disable - * bit6 1=activate IDE_RESET, 0=no action (default) - * bit5 1=enable IORDY, 0=disable IORDY (default) - * bit4 0=16-bit data port(default), 1=8-bit (XT) data port - * bit3 interrupt polarity: 1=active_low, 0=active_high(default) - * bit2 power-saving-mode(?): 1=enable, 0=disable(default) (write only) - * bit1 bus_master_mode(?): 1=enable, 0=disable(default) - * bit0 enable_io_ports: 1=enable(default), 0=disable - * - * Index-2 read-ahead counter preload bits 0-7 (byte, write only) - * bits7-0 bits7-0 of readahead count - * - * Index-3 read-ahead config register (byte, write only) - * bit7 1=enable_readahead, 0=disable_readahead(default) - * bit6 1=clear_FIFO, 0=no_action - * bit5 undefined - * bit4 mode4 timing control: 1=enable, 0=disable(default) - * bit3 undefined - * bit2 undefined - * bits1-0 bits9-8 of read-ahead count - * - * Index-4 base address register for control block (word) - * defaults: 0x3f6 for primary, 0x376 for secondary - * - * Index-5 data port timings (shared by both drives) (byte) - * standard PCI "clk" (clock) counts, default value = 0xf5 - * - * bits7-6 setup time: 00=1clk, 01=2clk, 10=3clk, 11=4clk - * bits5-3 hold time: 000=1clk, 001=2clk, 010=3clk, - * 011=4clk, 100=5clk, 101=6clk, - * 110=8clk, 111=12clk - * bits2-0 active time: 000=2clk, 001=3clk, 010=4clk, - * 011=5clk, 100=6clk, 101=8clk, - * 110=12clk, 111=16clk - * - * Index-6 command/control port timings (shared by both drives) (byte) - * same layout as Index-5, default value = 0xde - * - * Suggested CDR programming for PIO mode0 (600ns): - * 0x01f0,0x21,0xff,0x80,0x03f6,0xf5,0xde ; primary - * 0x0170,0x21,0xff,0x80,0x0376,0xf5,0xde ; secondary - * - * Suggested CDR programming for PIO mode3 (180ns): - * 0x01f0,0x21,0xff,0x80,0x03f6,0x09,0xde ; primary - * 0x0170,0x21,0xff,0x80,0x0376,0x09,0xde ; secondary - * - * Suggested CDR programming for PIO mode4 (120ns): - * 0x01f0,0x21,0xff,0x80,0x03f6,0x00,0xde ; primary - * 0x0170,0x21,0xff,0x80,0x0376,0x00,0xde ; secondary - * - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/ide.h> - -#include <asm/io.h> - -#define DRV_NAME "trm290" - -static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma) -{ - ide_hwif_t *hwif = HWIF(drive); - u16 reg = 0; - unsigned long flags; - - /* select PIO or DMA */ - reg = use_dma ? (0x21 | 0x82) : (0x21 & ~0x82); - - local_irq_save(flags); - - if (reg != hwif->select_data) { - hwif->select_data = reg; - /* set PIO/DMA */ - outb(0x51 | (hwif->channel << 3), hwif->config_data + 1); - outw(reg & 0xff, hwif->config_data); - } - - /* enable IRQ if not probing */ - if (drive->dev_flags & IDE_DFLAG_PRESENT) { - reg = inw(hwif->config_data + 3); - reg &= 0x13; - reg &= ~(1 << hwif->channel); - outw(reg, hwif->config_data + 3); - } - - local_irq_restore(flags); -} - -static void trm290_selectproc (ide_drive_t *drive) -{ - trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA)); -} - -static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL); -} - -static int trm290_dma_setup(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->hwgroup->rq; - unsigned int count, rw; - - if (rq_data_dir(rq)) { -#ifdef TRM290_NO_DMA_WRITES - /* always use PIO for writes */ - trm290_prepare_drive(drive, 0); /* select PIO xfer */ - return 1; -#endif - rw = 1; - } else - rw = 2; - - if (!(count = ide_build_dmatable(drive, rq))) { - /* try PIO instead of DMA */ - trm290_prepare_drive(drive, 0); /* select PIO xfer */ - return 1; - } - /* select DMA xfer */ - trm290_prepare_drive(drive, 1); - outl(hwif->dmatable_dma | rw, hwif->dma_base); - drive->waiting_for_dma = 1; - /* start DMA */ - outw(count * 2 - 1, hwif->dma_base + 2); - return 0; -} - -static void trm290_dma_start(ide_drive_t *drive) -{ -} - -static int trm290_dma_end(ide_drive_t *drive) -{ - u16 status; - - drive->waiting_for_dma = 0; - /* purge DMA mappings */ - ide_destroy_dmatable(drive); - status = inw(HWIF(drive)->dma_base + 2); - return status != 0x00ff; -} - -static int trm290_dma_test_irq(ide_drive_t *drive) -{ - u16 status; - - status = inw(HWIF(drive)->dma_base + 2); - return status == 0x00ff; -} - -static void trm290_dma_host_set(ide_drive_t *drive, int on) -{ -} - -static void __devinit init_hwif_trm290(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned int cfg_base = pci_resource_start(dev, 4); - unsigned long flags; - u8 reg = 0; - - if ((dev->class & 5) && cfg_base) - printk(KERN_INFO DRV_NAME " %s: chip", pci_name(dev)); - else { - cfg_base = 0x3df0; - printk(KERN_INFO DRV_NAME " %s: using default", pci_name(dev)); - } - printk(KERN_CONT " config base at 0x%04x\n", cfg_base); - hwif->config_data = cfg_base; - hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0); - - printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", - hwif->name, hwif->dma_base, hwif->dma_base + 3); - - if (ide_allocate_dma_engine(hwif)) - return; - - local_irq_save(flags); - /* put config reg into first byte of hwif->select_data */ - outb(0x51 | (hwif->channel << 3), hwif->config_data + 1); - /* select PIO as default */ - hwif->select_data = 0x21; - outb(hwif->select_data, hwif->config_data); - /* get IRQ info */ - reg = inb(hwif->config_data + 3); - /* mask IRQs for both ports */ - reg = (reg & 0x10) | 0x03; - outb(reg, hwif->config_data + 3); - local_irq_restore(flags); - - if (reg & 0x10) - /* legacy mode */ - hwif->irq = hwif->channel ? 15 : 14; - else if (!hwif->irq && hwif->mate && hwif->mate->irq) - /* sharing IRQ with mate */ - hwif->irq = hwif->mate->irq; - -#if 1 - { - /* - * My trm290-based card doesn't seem to work with all possible values - * for the control basereg, so this kludge ensures that we use only - * values that are known to work. Ugh. -ml - */ - u16 new, old, compat = hwif->channel ? 0x374 : 0x3f4; - static u16 next_offset = 0; - u8 old_mask; - - outb(0x54 | (hwif->channel << 3), hwif->config_data + 1); - old = inw(hwif->config_data); - old &= ~1; - old_mask = inb(old + 2); - if (old != compat && old_mask == 0xff) { - /* leave lower 10 bits untouched */ - compat += (next_offset += 0x400); - hwif->io_ports.ctl_addr = compat + 2; - outw(compat | 1, hwif->config_data); - new = inw(hwif->config_data); - printk(KERN_INFO "%s: control basereg workaround: " - "old=0x%04x, new=0x%04x\n", - hwif->name, old, new & ~1); - } - } -#endif -} - -static const struct ide_port_ops trm290_port_ops = { - .selectproc = trm290_selectproc, -}; - -static struct ide_dma_ops trm290_dma_ops = { - .dma_host_set = trm290_dma_host_set, - .dma_setup = trm290_dma_setup, - .dma_exec_cmd = trm290_dma_exec_cmd, - .dma_start = trm290_dma_start, - .dma_end = trm290_dma_end, - .dma_test_irq = trm290_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -static const struct ide_port_info trm290_chipset __devinitdata = { - .name = DRV_NAME, - .init_hwif = init_hwif_trm290, - .chipset = ide_trm290, - .port_ops = &trm290_port_ops, - .dma_ops = &trm290_dma_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | -#if 0 /* play it safe for now */ - IDE_HFLAG_TRUST_BIOS_FOR_DMA | -#endif - IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_NO_LBA48, -}; - -static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &trm290_chipset, NULL); -} - -static const struct pci_device_id trm290_pci_tbl[] = { - { PCI_VDEVICE(TEKRAM, PCI_DEVICE_ID_TEKRAM_DC290), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, trm290_pci_tbl); - -static struct pci_driver trm290_pci_driver = { - .name = "TRM290_IDE", - .id_table = trm290_pci_tbl, - .probe = trm290_init_one, - .remove = ide_pci_remove, -}; - -static int __init trm290_ide_init(void) -{ - return ide_pci_register_driver(&trm290_pci_driver); -} - -static void __exit trm290_ide_exit(void) -{ - pci_unregister_driver(&trm290_pci_driver); -} - -module_init(trm290_ide_init); -module_exit(trm290_ide_exit); - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("PCI driver module for Tekram TRM290 IDE"); -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c deleted file mode 100644 index 2a812d3207e..00000000000 --- a/drivers/ide/pci/via82cxxx.c +++ /dev/null @@ -1,514 +0,0 @@ -/* - * VIA IDE driver for Linux. Supported southbridges: - * - * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b, - * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a, - * vt8235, vt8237, vt8237a - * - * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz - * - * Based on the work of: - * Michel Aubry - * Jeff Garzik - * Andre Hedrick - * - * Documentation: - * Obsolete device documentation publically available from via.com.tw - * Current device documentation available under NDA only - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> -#include <linux/dmi.h> - -#ifdef CONFIG_PPC_CHRP -#include <asm/processor.h> -#endif - -#define DRV_NAME "via82cxxx" - -#define VIA_IDE_ENABLE 0x40 -#define VIA_IDE_CONFIG 0x41 -#define VIA_FIFO_CONFIG 0x43 -#define VIA_MISC_1 0x44 -#define VIA_MISC_2 0x45 -#define VIA_MISC_3 0x46 -#define VIA_DRIVE_TIMING 0x48 -#define VIA_8BIT_TIMING 0x4e -#define VIA_ADDRESS_SETUP 0x4c -#define VIA_UDMA_TIMING 0x50 - -#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */ -#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */ -#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */ -#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ -#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ -#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ - -/* - * VIA SouthBridge chips. - */ - -static struct via_isa_bridge { - char *name; - u16 id; - u8 rev_min; - u8 rev_max; - u8 udma_mask; - u8 flags; -} via_isa_bridges[] = { - { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, - { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, - { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, - { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, - { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, - { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, - { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, - { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, - { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, - { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, - { NULL } -}; - -static unsigned int via_clock; -static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; - -struct via82cxxx_dev -{ - struct via_isa_bridge *via_config; - unsigned int via_80w; -}; - -/** - * via_set_speed - write timing registers - * @dev: PCI device - * @dn: device - * @timing: IDE timing data to use - * - * via_set_speed writes timing values to the chipset registers - */ - -static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - u8 t; - - if (~vdev->via_config->flags & VIA_BAD_AST) { - pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); - pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); - } - - pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)), - ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); - - pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), - ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); - - switch (vdev->via_config->udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; - case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; - case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; - default: return; - } - - pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); -} - -/** - * via_set_drive - configure transfer mode - * @drive: Drive to set up - * @speed: desired speed - * - * via_set_drive() computes timing values configures the chipset to - * a desired transfer mode. It also can be called by upper layers. - */ - -static void via_set_drive(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - ide_drive_t *peer = ide_get_pair_dev(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - struct ide_timing t, p; - unsigned int T, UT; - - T = 1000000000 / via_clock; - - switch (vdev->via_config->udma_mask) { - case ATA_UDMA2: UT = T; break; - case ATA_UDMA4: UT = T/2; break; - case ATA_UDMA5: UT = T/3; break; - case ATA_UDMA6: UT = T/4; break; - default: UT = T; - } - - ide_timing_compute(drive, speed, &t, T, UT); - - if (peer) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); - ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); - } - - via_set_speed(HWIF(drive), drive->dn, &t); -} - -/** - * via_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * A callback from the upper layers for PIO-only tuning. - */ - -static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - via_set_drive(drive, XFER_PIO_0 + pio); -} - -static struct via_isa_bridge *via_config_find(struct pci_dev **isa) -{ - struct via_isa_bridge *via_config; - - for (via_config = via_isa_bridges; via_config->id; via_config++) - if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + - !!(via_config->flags & VIA_BAD_ID), - via_config->id, NULL))) { - - if ((*isa)->revision >= via_config->rev_min && - (*isa)->revision <= via_config->rev_max) - break; - pci_dev_put(*isa); - } - - return via_config; -} - -/* - * Check and handle 80-wire cable presence - */ -static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u) -{ - int i; - - switch (vdev->via_config->udma_mask) { - case ATA_UDMA4: - for (i = 24; i >= 0; i -= 8) - if (((u >> (i & 16)) & 8) && - ((u >> i) & 0x20) && - (((u >> i) & 7) < 2)) { - /* - * 2x PCI clock and - * UDMA w/ < 3T/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case ATA_UDMA5: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 4))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case ATA_UDMA6: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 6))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - } -} - -/** - * init_chipset_via82cxxx - initialization handler - * @dev: PCI device - * - * The initialization callback. Here we determine the IDE chip type - * and initialize its drive independent registers. - */ - -static unsigned int init_chipset_via82cxxx(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - struct via_isa_bridge *via_config = vdev->via_config; - u8 t, v; - u32 u; - - /* - * Detect cable and configure Clk66 - */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - - via_cable_detect(vdev, u); - - if (via_config->udma_mask == ATA_UDMA4) { - /* Enable Clk66 */ - pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); - } else if (via_config->flags & VIA_BAD_CLK66) { - /* Would cause trouble on 596a and 686 */ - pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); - } - - /* - * Check whether interfaces are enabled. - */ - - pci_read_config_byte(dev, VIA_IDE_ENABLE, &v); - - /* - * Set up FIFO sizes and thresholds. - */ - - pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t); - - /* Disable PREQ# till DDACK# */ - if (via_config->flags & VIA_BAD_PREQ) { - /* Would crash on 586b rev 41 */ - t &= 0x7f; - } - - /* Fix FIFO split between channels */ - if (via_config->flags & VIA_SET_FIFO) { - t &= (t & 0x9f); - switch (v & 3) { - case 2: t |= 0x00; break; /* 16 on primary */ - case 1: t |= 0x60; break; /* 16 on secondary */ - case 3: t |= 0x20; break; /* 8 pri 8 sec */ - } - } - - pci_write_config_byte(dev, VIA_FIFO_CONFIG, t); - - return 0; -} - -/* - * Cable special cases - */ - -static const struct dmi_system_id cable_dmi_table[] = { - { - .ident = "Acer Ferrari 3400", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."), - DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"), - }, - }, - { } -}; - -static int via_cable_override(struct pci_dev *pdev) -{ - /* Systems by DMI */ - if (dmi_check_system(cable_dmi_table)) - return 1; - - /* Arima W730-K8/Targa Visionary 811/... */ - if (pdev->subsystem_vendor == 0x161F && - pdev->subsystem_device == 0x2032) - return 1; - - return 0; -} - -static u8 via82cxxx_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *pdev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(pdev); - struct via82cxxx_dev *vdev = host->host_priv; - - if (via_cable_override(pdev)) - return ATA_CBL_PATA40_SHORT; - - if ((vdev->via_80w >> hwif->channel) & 1) - return ATA_CBL_PATA80; - else - return ATA_CBL_PATA40; -} - -static const struct ide_port_ops via_port_ops = { - .set_pio_mode = via_set_pio_mode, - .set_dma_mode = via_set_drive, - .cable_detect = via82cxxx_cable_detect, -}; - -static const struct ide_port_info via82cxxx_chipset __devinitdata = { - .name = DRV_NAME, - .init_chipset = init_chipset_via82cxxx, - .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, - .port_ops = &via_port_ops, - .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | - IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_IO_32BIT, - .pio_mask = ATA_PIO5, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, -}; - -static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct pci_dev *isa = NULL; - struct via_isa_bridge *via_config; - struct via82cxxx_dev *vdev; - int rc; - u8 idx = id->driver_data; - struct ide_port_info d; - - d = via82cxxx_chipset; - - /* - * Find the ISA bridge and check we know what it is. - */ - via_config = via_config_find(&isa); - if (!via_config->id) { - printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n", - pci_name(dev)); - return -ENODEV; - } - - /* - * Print the boot message. - */ - printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n", - pci_name(dev), via_config->name, isa->revision, - via_config->udma_mask ? "U" : "MW", - via_dma[via_config->udma_mask ? - (fls(via_config->udma_mask) - 1) : 0]); - - pci_dev_put(isa); - - /* - * Determine system bus clock. - */ - via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; - - switch (via_clock) { - case 33000: via_clock = 33333; break; - case 37000: via_clock = 37500; break; - case 41000: via_clock = 41666; break; - } - - if (via_clock < 20000 || via_clock > 50000) { - printk(KERN_WARNING DRV_NAME ": User given PCI clock speed " - "impossible (%d), using 33 MHz instead.\n", via_clock); - printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want " - "to assume 80-wire cable.\n"); - via_clock = 33333; - } - - if (idx == 0) - d.host_flags |= IDE_HFLAG_NO_AUTODMA; - else - d.enablebits[1].reg = d.enablebits[0].reg = 0; - - if ((via_config->flags & VIA_NO_UNMASK) == 0) - d.host_flags |= IDE_HFLAG_UNMASK_IRQS; - -#ifdef CONFIG_PPC_CHRP - if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos) - d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; -#endif - - d.udma_mask = via_config->udma_mask; - - vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); - if (!vdev) { - printk(KERN_ERR DRV_NAME " %s: out of memory :(\n", - pci_name(dev)); - return -ENOMEM; - } - - vdev->via_config = via_config; - - rc = ide_pci_init_one(dev, &d, vdev); - if (rc) - kfree(vdev); - - return rc; -} - -static void __devexit via_remove(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - - ide_pci_remove(dev); - kfree(vdev); -} - -static const struct pci_device_id via_pci_tbl[] = { - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, via_pci_tbl); - -static struct pci_driver via_pci_driver = { - .name = "VIA_IDE", - .id_table = via_pci_tbl, - .probe = via_init_one, - .remove = __devexit_p(via_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init via_ide_init(void) -{ - return ide_pci_register_driver(&via_pci_driver); -} - -static void __exit via_ide_exit(void) -{ - pci_unregister_driver(&via_pci_driver); -} - -module_init(via_ide_init); -module_exit(via_ide_exit); - -MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for VIA IDE"); -MODULE_LICENSE("GPL"); |