diff options
Diffstat (limited to 'drivers/ide/pci')
| -rw-r--r-- | drivers/ide/pci/alim15x3.c | 42 | ||||
| -rw-r--r-- | drivers/ide/pci/cs5520.c | 2 |
2 files changed, 14 insertions, 30 deletions
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index c1922f9cfe8..f2129d5e07f 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -39,6 +39,16 @@ #include <asm/io.h> /* + * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking + * (this is DANGEROUS and could result in data corruption). + */ +static int wdc_udma; + +module_param(wdc_udma, bool, 0); +MODULE_PARM_DESC(wdc_udma, + "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)"); + +/* * ALi devices are not plug in. Otherwise these static values would * need to go. They ought to go away anyway */ @@ -76,11 +86,6 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) a_clc = 0; c_time = ide_pio_timings[pio].cycle_time; -#if 0 - if ((r_clc = ((c_time - s_time - a_time) * bus_speed + 999) / 1000) >= 16) - r_clc = 0; -#endif - if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { r_clc = 1; } else { @@ -110,16 +115,6 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_byte(dev, port, s_clc); pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc); local_irq_restore(flags); - - /* - * setup active rec - * { 70, 165, 365 }, PIO Mode 0 - * { 50, 125, 208 }, PIO Mode 1 - * { 30, 100, 110 }, PIO Mode 2 - * { 30, 80, 70 }, PIO Mode 3 with IORDY - * { 25, 70, 25 }, PIO Mode 4 with IORDY ns - * { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard) - */ } /** @@ -131,9 +126,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) * The actual rules for the ALi are: * No UDMA on revisions <= 0x20 * Disk only for revisions < 0xC2 - * Not WDC drives for revisions < 0xC2 - * - * FIXME: WDC ifdef needs to die + * Not WDC drives on M1543C-E (?) */ static u8 ali_udma_filter(ide_drive_t *drive) @@ -141,10 +134,9 @@ static u8 ali_udma_filter(ide_drive_t *drive) if (m5229_revision > 0x20 && m5229_revision < 0xC2) { if (drive->media != ide_disk) return 0; -#ifndef CONFIG_WDC_ALI15X3 - if (chip_is_1543c_e && strstr(drive->id->model, "WDC ")) + if (chip_is_1543c_e && strstr(drive->id->model, "WDC ") && + wdc_udma == 0) return 0; -#endif } return drive->hwif->ultra_mask; @@ -537,17 +529,9 @@ static const struct ide_port_info ali15x3_chipset __devinitdata = { static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct pci_device_id ati_rs100[] = { - { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) }, - { }, - }; - struct ide_port_info d = ali15x3_chipset; u8 rev = dev->revision, idx = id->driver_data; - if (pci_dev_present(ati_rs100)) - printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n"); - /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ if (rev <= 0xC4) d.host_flags |= IDE_HFLAG_NO_LBA48_DMA; diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 17669a43443..992b1cf8db6 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -119,6 +119,7 @@ static const struct ide_dma_ops cs5520_dma_ops = { .dma_timeout = ide_dma_timeout, }; +/* FIXME: VDMA is disabled because it caused system hangs */ #define DECLARE_CS_DEV(name_str) \ { \ .name = name_str, \ @@ -126,7 +127,6 @@ static const struct ide_dma_ops cs5520_dma_ops = { .dma_ops = &cs5520_dma_ops, \ .host_flags = IDE_HFLAG_ISA_PORTS | \ IDE_HFLAG_CS5520 | \ - IDE_HFLAG_VDMA | \ IDE_HFLAG_NO_ATAPI_DMA | \ IDE_HFLAG_ABUSE_SET_DMA_MODE, \ .pio_mask = ATA_PIO4, \ |