aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/ppc/pmac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/ppc/pmac.c')
-rw-r--r--drivers/ide/ppc/pmac.c183
1 files changed, 108 insertions, 75 deletions
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 88619b50d9e..3cac6b2790d 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -79,8 +79,6 @@ typedef struct pmac_ide_hwif {
} pmac_ide_hwif_t;
-static pmac_ide_hwif_t pmac_ide[MAX_HWIFS];
-
enum {
controller_ohare, /* OHare based */
controller_heathrow, /* Heathrow/Paddington */
@@ -411,7 +409,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
*/
#define IDE_WAKEUP_DELAY (1*HZ)
-static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
+static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
@@ -419,7 +417,7 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
#define PMAC_IDE_REG(x) \
- ((void __iomem *)((drive)->hwif->io_ports[IDE_DATA_OFFSET] + (x)))
+ ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
/*
* Apply the timings of the proper unit (master/slave) to the shared
@@ -920,12 +918,29 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
return 0;
}
+static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+ .set_pio_mode = pmac_ide_set_pio_mode,
+ .set_dma_mode = pmac_ide_set_dma_mode,
+ .selectproc = pmac_ide_kauai_selectproc,
+};
+
+static const struct ide_port_ops pmac_ide_port_ops = {
+ .set_pio_mode = pmac_ide_set_pio_mode,
+ .set_dma_mode = pmac_ide_set_dma_mode,
+ .selectproc = pmac_ide_selectproc,
+};
+
+static const struct ide_dma_ops pmac_dma_ops;
+
static const struct ide_port_info pmac_port_info = {
+ .init_dma = pmac_ide_init_dma,
.chipset = ide_pmac,
+#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ .dma_ops = &pmac_dma_ops,
+#endif
+ .port_ops = &pmac_ide_port_ops,
.host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
- IDE_HFLAG_PIO_NO_DOWNGRADE |
IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
IDE_HFLAG_UNMASK_IRQS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -950,12 +965,15 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
+ d.port_ops = &pmac_ide_ata6_port_ops;
d.udma_mask = ATA_UDMA6;
} else if (of_device_is_compatible(np, "kauai-ata")) {
pmif->kind = controller_un_ata6;
+ d.port_ops = &pmac_ide_ata6_port_ops;
d.udma_mask = ATA_UDMA5;
} else if (of_device_is_compatible(np, "K2-UATA")) {
pmif->kind = controller_k2_ata6;
+ d.port_ops = &pmac_ide_ata6_port_ops;
d.udma_mask = ATA_UDMA5;
} else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0) {
@@ -1032,37 +1050,29 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
default_hwif_mmiops(hwif);
hwif->OUTBSYNC = pmac_outbsync;
- /* Tell common code _not_ to mess with resources */
- hwif->mmio = 1;
hwif->hwif_data = pmif;
ide_init_port_hw(hwif, hw);
- hwif->noprobe = pmif->mediabay;
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- hwif->set_pio_mode = pmac_ide_set_pio_mode;
- if (pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6
- || pmif->kind == controller_sh_ata6)
- hwif->selectproc = pmac_ide_kauai_selectproc;
- else
- hwif->selectproc = pmac_ide_selectproc;
- hwif->set_dma_mode = pmac_ide_set_dma_mode;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);
-
+
+ if (pmif->mediabay) {
#ifdef CONFIG_PMAC_MEDIABAY
- if (pmif->mediabay && check_media_bay_by_base(pmif->regbase, MB_CD) == 0)
- hwif->noprobe = 0;
-#endif /* CONFIG_PMAC_MEDIABAY */
+ if (check_media_bay_by_base(pmif->regbase, MB_CD)) {
+#else
+ if (1) {
+#endif
+ hwif->drives[0].noprobe = 1;
+ hwif->drives[1].noprobe = 1;
+ }
+ }
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (pmif->cable_80 == 0)
d.udma_mask &= ATA_UDMA2;
- /* has a DBDMA controller channel */
- if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0)
#endif
- d.udma_mask = d.mwdma_mask = 0;
idx[0] = hwif->index;
@@ -1076,8 +1086,9 @@ static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
int i;
for (i = 0; i < 8; ++i)
- hw->io_ports[i] = base + i * 0x10;
- hw->io_ports[8] = base + 0x160;
+ hw->io_ports_array[i] = base + i * 0x10;
+
+ hw->io_ports.ctl_addr = base + 0x160;
}
/*
@@ -1088,35 +1099,36 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
void __iomem *base;
unsigned long regbase;
- int irq;
ide_hwif_t *hwif;
pmac_ide_hwif_t *pmif;
- int i, rc;
+ int irq, rc;
hw_regs_t hw;
- i = 0;
- while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0
- || pmac_ide[i].node != NULL))
- ++i;
- if (i >= MAX_HWIFS) {
+ pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
+ if (pmif == NULL)
+ return -ENOMEM;
+
+ hwif = ide_find_port();
+ if (hwif == NULL) {
printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n");
printk(KERN_ERR " %s\n", mdev->ofdev.node->full_name);
- return -ENODEV;
+ rc = -ENODEV;
+ goto out_free_pmif;
}
- pmif = &pmac_ide[i];
- hwif = &ide_hwifs[i];
-
if (macio_resource_count(mdev) == 0) {
- printk(KERN_WARNING "ide%d: no address for %s\n",
- i, mdev->ofdev.node->full_name);
- return -ENXIO;
+ printk(KERN_WARNING "ide-pmac: no address for %s\n",
+ mdev->ofdev.node->full_name);
+ rc = -ENXIO;
+ goto out_free_pmif;
}
/* Request memory resource for IO ports */
if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) {
- printk(KERN_ERR "ide%d: can't request mmio resource !\n", i);
- return -EBUSY;
+ printk(KERN_ERR "ide-pmac: can't request MMIO resource for "
+ "%s!\n", mdev->ofdev.node->full_name);
+ rc = -EBUSY;
+ goto out_free_pmif;
}
/* XXX This is bogus. Should be fixed in the registry by checking
@@ -1125,8 +1137,8 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
* where that happens though...
*/
if (macio_irq_count(mdev) == 0) {
- printk(KERN_WARNING "ide%d: no intrs for device %s, using 13\n",
- i, mdev->ofdev.node->full_name);
+ printk(KERN_WARNING "ide-pmac: no intrs for device %s, using "
+ "13\n", mdev->ofdev.node->full_name);
irq = irq_create_mapping(NULL, 13);
} else
irq = macio_irq(mdev, 0);
@@ -1144,7 +1156,9 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (macio_resource_count(mdev) >= 2) {
if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
- printk(KERN_WARNING "ide%d: can't request DMA resource !\n", i);
+ printk(KERN_WARNING "ide-pmac: can't request DMA "
+ "resource for %s!\n",
+ mdev->ofdev.node->full_name);
else
pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
} else
@@ -1166,11 +1180,15 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
iounmap(pmif->dma_regs);
macio_release_resource(mdev, 1);
}
- memset(pmif, 0, sizeof(*pmif));
macio_release_resource(mdev, 0);
+ kfree(pmif);
}
return rc;
+
+out_free_pmif:
+ kfree(pmif);
+ return rc;
}
static int
@@ -1215,7 +1233,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
pmac_ide_hwif_t *pmif;
void __iomem *base;
unsigned long rbase, rlen;
- int i, rc;
+ int rc;
hw_regs_t hw;
np = pci_device_to_OF_node(pdev);
@@ -1223,30 +1241,32 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n");
return -ENODEV;
}
- i = 0;
- while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0
- || pmac_ide[i].node != NULL))
- ++i;
- if (i >= MAX_HWIFS) {
+
+ pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
+ if (pmif == NULL)
+ return -ENOMEM;
+
+ hwif = ide_find_port();
+ if (hwif == NULL) {
printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n");
printk(KERN_ERR " %s\n", np->full_name);
- return -ENODEV;
+ rc = -ENODEV;
+ goto out_free_pmif;
}
- pmif = &pmac_ide[i];
- hwif = &ide_hwifs[i];
-
if (pci_enable_device(pdev)) {
- printk(KERN_WARNING "ide%i: Can't enable PCI device for %s\n",
- i, np->full_name);
- return -ENXIO;
+ printk(KERN_WARNING "ide-pmac: Can't enable PCI device for "
+ "%s\n", np->full_name);
+ rc = -ENXIO;
+ goto out_free_pmif;
}
pci_set_master(pdev);
if (pci_request_regions(pdev, "Kauai ATA")) {
- printk(KERN_ERR "ide%d: Cannot obtain PCI resources for %s\n",
- i, np->full_name);
- return -ENXIO;
+ printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for "
+ "%s\n", np->full_name);
+ rc = -ENXIO;
+ goto out_free_pmif;
}
hwif->dev = &pdev->dev;
@@ -1276,11 +1296,15 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
/* The inteface is released to the common IDE layer */
pci_set_drvdata(pdev, NULL);
iounmap(base);
- memset(pmif, 0, sizeof(*pmif));
pci_release_regions(pdev);
+ kfree(pmif);
}
return rc;
+
+out_free_pmif:
+ kfree(pmif);
+ return rc;
}
static int
@@ -1652,18 +1676,31 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive)
printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
}
+static const struct ide_dma_ops pmac_dma_ops = {
+ .dma_host_set = pmac_ide_dma_host_set,
+ .dma_setup = pmac_ide_dma_setup,
+ .dma_exec_cmd = pmac_ide_dma_exec_cmd,
+ .dma_start = pmac_ide_dma_start,
+ .dma_end = pmac_ide_dma_end,
+ .dma_test_irq = pmac_ide_dma_test_irq,
+ .dma_timeout = ide_dma_timeout,
+ .dma_lost_irq = pmac_ide_dma_lost_irq,
+};
+
/*
* Allocate the data structures needed for using DMA with an interface
* and fill the proper list of functions pointers
*/
-static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
{
+ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
struct pci_dev *dev = to_pci_dev(hwif->dev);
/* We won't need pci_dev if we switch to generic consistent
* DMA routines ...
*/
- if (dev == NULL)
+ if (dev == NULL || pmif->dma_regs == 0)
return -ENODEV;
/*
* Allocate space for the DBDMA commands.
@@ -1682,18 +1719,14 @@ static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->sg_max_nents = MAX_DCMDS;
- hwif->dma_host_set = &pmac_ide_dma_host_set;
- hwif->dma_setup = &pmac_ide_dma_setup;
- hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd;
- hwif->dma_start = &pmac_ide_dma_start;
- hwif->ide_dma_end = &pmac_ide_dma_end;
- hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq;
- hwif->dma_timeout = &ide_dma_timeout;
- hwif->dma_lost_irq = &pmac_ide_dma_lost_irq;
-
return 0;
}
-
+#else
+static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
+{
+ return -EOPNOTSUPP;
+}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);