aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig38
-rw-r--r--drivers/ide/Makefile8
2 files changed, 6 insertions, 40 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b50b5dac95b..6c6dd2faced 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -54,38 +54,6 @@ menuconfig IDE
if IDE
-config BLK_DEV_IDE
- tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
- ---help---
- If you say Y here, you will use the full-featured IDE driver to
- control up to ten ATA/IDE interfaces, each being able to serve a
- "master" and a "slave" device, for a total of up to twenty ATA/IDE
- disk/cdrom/tape/floppy drives.
-
- Useful information about large (>540 MB) IDE disks, multiple
- interfaces, what to do if ATA/IDE devices are not automatically
- detected, sound card ATA/IDE ports, module support, and other
- topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
- information about hard drives, consult the Disk-HOWTO and the
- Multi-Disk-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To fine-tune ATA/IDE drive/interface parameters for improved
- performance, look for the hdparm package at
- <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
- Do not compile this driver as a module if your root file system (the
- one containing the directory /) is located on an IDE device.
-
- If you have one or more IDE drives, say Y or M here. If your system
- has no IDE drives, or if memory requirements are really tight, you
- could say N here, and select the "Old hard disk driver" below
- instead to save about 13 KB of memory in the kernel.
-
-if BLK_DEV_IDE
-
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
config IDE_TIMINGS
@@ -348,7 +316,7 @@ config BLK_DEV_IDEPCI
config IDEPCI_PCIBUS_ORDER
bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
- depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI
+ depends on IDE=y && BLK_DEV_IDEPCI
default y
help
Probe IDE PCI devices in the order in which they appear on the
@@ -729,7 +697,7 @@ endif
config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
- depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
+ depends on PPC_PMAC && IDE=y
select IDE_TIMINGS
help
This driver provides support for the on-board IDE controller on
@@ -963,6 +931,4 @@ config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-endif
-
endif # IDE
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 308b8a12f31..f408983f89f 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -15,14 +15,14 @@ ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
-obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
+obj-$(CONFIG_IDE) += ide-core.o
ifeq ($(CONFIG_IDE_ARM), y)
ide-arm-core-y += arm/ide_arm.o
obj-y += ide-arm-core.o
endif
-obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/
+obj-$(CONFIG_IDE) += legacy/ pci/
obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o
@@ -31,7 +31,7 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y)
obj-y += cmd640-core.o
endif
-obj-$(CONFIG_BLK_DEV_IDE) += ppc/
+obj-$(CONFIG_IDE) += ppc/
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
@@ -54,4 +54,4 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
obj-y += ide-platform-core.o
endif
-obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/
+obj-$(CONFIG_IDE) += arm/ mips/