diff options
Diffstat (limited to 'drivers/ide')
-rw-r--r-- | drivers/ide/Kconfig | 1 | ||||
-rw-r--r-- | drivers/ide/arm/bast-ide.c | 1 | ||||
-rw-r--r-- | drivers/ide/arm/ide_arm.c | 1 | ||||
-rw-r--r-- | drivers/ide/arm/palm_bk3710.c | 25 | ||||
-rw-r--r-- | drivers/ide/ide-generic.c | 10 | ||||
-rw-r--r-- | drivers/ide/ide-pnp.c | 1 | ||||
-rw-r--r-- | drivers/ide/ide-probe.c | 8 | ||||
-rw-r--r-- | drivers/ide/ide-proc.c | 3 | ||||
-rw-r--r-- | drivers/ide/ide-taskfile.c | 6 | ||||
-rw-r--r-- | drivers/ide/ide.c | 24 | ||||
-rw-r--r-- | drivers/ide/legacy/buddha.c | 2 | ||||
-rw-r--r-- | drivers/ide/legacy/falconide.c | 2 | ||||
-rw-r--r-- | drivers/ide/legacy/gayle.c | 6 | ||||
-rw-r--r-- | drivers/ide/legacy/ide-cs.c | 44 | ||||
-rw-r--r-- | drivers/ide/legacy/macide.c | 2 | ||||
-rw-r--r-- | drivers/ide/legacy/q40ide.c | 2 | ||||
-rw-r--r-- | drivers/ide/pci/cmd640.c | 2 | ||||
-rw-r--r-- | drivers/ide/pci/delkin_cb.c | 28 | ||||
-rw-r--r-- | drivers/ide/pci/opti621.c | 221 | ||||
-rw-r--r-- | drivers/ide/pci/sis5513.c | 5 | ||||
-rw-r--r-- | drivers/ide/ppc/mpc8xx.c | 4 | ||||
-rw-r--r-- | drivers/ide/ppc/pmac.c | 60 |
22 files changed, 171 insertions, 287 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b4f3aefa12b..1607536ff5f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1028,6 +1028,7 @@ endif config BLK_DEV_HD_ONLY bool "Old hard disk (MFM/RLL/IDE) driver" + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help There are two drivers for MFM/RLL/IDE hard disks. Most people use the newer enhanced driver, but this old one is still around for two diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 713cef20622..8e8c28104b4 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -42,6 +42,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) hw.io_ports.ctl_addr = aux + (6 * 0x20); hw.irq = irq; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif == NULL) diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 4263ffd4ab2..2f311da4c96 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -49,6 +49,7 @@ static int __init ide_arm_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = IDE_ARM_IRQ; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 96378ebfb31..cc24803fadf 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -353,8 +353,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) struct clk *clkp; struct resource *mem, *irq; ide_hwif_t *hwif; - void __iomem *base; - int pribase, i; + unsigned long base; + int i; hw_regs_t hw; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -374,22 +374,27 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) printk(KERN_ERR "failed to get memory region resource\n"); return -ENODEV; } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (irq == NULL) { printk(KERN_ERR "failed to get IRQ resource\n"); return -ENODEV; } - base = (void *)mem->start; + if (request_mem_region(mem->start, mem->end - mem->start + 1, + "palm_bk3710") == NULL) { + printk(KERN_ERR "failed to request memory region\n"); + return -EBUSY; + } + + base = IO_ADDRESS(mem->start); /* Configure the Palm Chip controller */ - palm_bk3710_chipinit(base); + palm_bk3710_chipinit((void __iomem *)base); - pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET; for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = pribase + i; - hw.io_ports.ctl_addr = mem->start + - IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; + hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; hw.irq = irq->start; hw.chipset = ide_palm3710; @@ -409,9 +414,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) ide_device_add(idx, &palm_bk3710_port_info); - if (!hwif->present) - goto out; - return 0; out: printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n"); @@ -437,4 +439,3 @@ static int __init palm_bk3710_init(void) module_init(palm_bk3710_init); MODULE_LICENSE("GPL"); - diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index a6073e248f4..2d92214096a 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -22,6 +22,10 @@ #define DRV_NAME "ide_generic" +static int probe_mask = 0x03; +module_param(probe_mask, int, 0); +MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); + static ssize_t store_add(struct class *cls, const char *buf, size_t n) { ide_hwif_t *hwif; @@ -89,6 +93,9 @@ static int __init ide_generic_init(void) u8 idx[MAX_HWIFS]; int i; + printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module " + "parameter for probing all legacy ISA IDE ports\n"); + for (i = 0; i < MAX_HWIFS; i++) { ide_hwif_t *hwif; unsigned long io_addr = ide_default_io_base(i); @@ -96,7 +103,7 @@ static int __init ide_generic_init(void) idx[i] = 0xff; - if (io_addr) { + if ((probe_mask & (1 << i)) && io_addr) { if (!request_region(io_addr, 8, DRV_NAME)) { printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " "not free.\n", @@ -125,6 +132,7 @@ static int __init ide_generic_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io_addr, io_addr + 0x206); hw.irq = ide_default_irq(io_addr); + hw.chipset = ide_generic; ide_init_port_hw(hwif, &hw); idx[i] = i; diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 6a8953f68e9..adbd0178416 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -55,6 +55,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = pnp_irq(dev, 0); + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 655ec7ef568..d27061b3932 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -646,8 +646,6 @@ static int ide_register_port(ide_hwif_t *hwif) goto out; } - get_device(&hwif->gendev); - hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev, MKDEV(0, 0), hwif, hwif->name); if (IS_ERR(hwif->portdev)) { @@ -1333,8 +1331,7 @@ static void ide_port_init_devices(ide_hwif_t *hwif) static void ide_init_port(ide_hwif_t *hwif, unsigned int port, const struct ide_port_info *d) { - if (d->chipset != ide_etrax100) - hwif->channel = port; + hwif->channel = port; if (d->chipset) hwif->chipset = d->chipset; @@ -1519,7 +1516,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) continue; } - if (d->chipset != ide_etrax100 && (i & 1) && mate) { + if ((i & 1) && mate) { hwif->mate = mate; mate->mate = hwif; } @@ -1665,6 +1662,7 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no, ide_std_init_ports(hw, base, ctl); hw->irq = irq; + hw->chipset = d->chipset; hwif = ide_find_port_slot(d); if (hwif) { diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 8d6ad812a01..8af88bf0969 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -63,7 +63,6 @@ static int proc_ide_read_imodel case ide_pmac: name = "mac-io"; break; case ide_au1xxx: name = "au1xxx"; break; case ide_palm3710: name = "palm3710"; break; - case ide_etrax100: name = "etrax100"; break; case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; } @@ -77,7 +76,7 @@ static int proc_ide_read_mate ide_hwif_t *hwif = (ide_hwif_t *) data; int len; - if (hwif && hwif->mate && hwif->mate->present) + if (hwif && hwif->mate) len = sprintf(page, "%s\n", hwif->mate->name); else len = sprintf(page, "(none)\n"); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0c908ca3ff7..ab545ffa154 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat; /* - * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms. + * Last sector was transfered, wait until device is ready. This can + * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ - for (retries = 0; retries < 100; retries++) { + for (retries = 0; retries < 1000; retries++) { stat = ide_read_status(drive); if (stat & BUSY_STAT) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index c758dcb13b1..300431d080a 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -315,13 +315,14 @@ void ide_unregister(ide_hwif_t *hwif) BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); + mutex_lock(&ide_cfg_mtx); - spin_lock_irq(&ide_lock); - if (!hwif->present) - goto abort; - __ide_port_unregister_devices(hwif); - hwif->present = 0; + spin_lock_irq(&ide_lock); + if (hwif->present) { + __ide_port_unregister_devices(hwif); + hwif->present = 0; + } spin_unlock_irq(&ide_lock); ide_proc_unregister_port(hwif); @@ -351,16 +352,15 @@ void ide_unregister(ide_hwif_t *hwif) blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS); kfree(hwif->sg_table); unregister_blkdev(hwif->major, hwif->name); - spin_lock_irq(&ide_lock); if (hwif->dma_base) ide_release_dma_engine(hwif); + spin_lock_irq(&ide_lock); /* restore hwif data to pristine status */ ide_init_port_data(hwif, hwif->index); - -abort: spin_unlock_irq(&ide_lock); + mutex_unlock(&ide_cfg_mtx); } @@ -1094,13 +1094,6 @@ struct bus_type ide_bus_type = { EXPORT_SYMBOL_GPL(ide_bus_type); -static void ide_port_class_release(struct device *portdev) -{ - ide_hwif_t *hwif = dev_get_drvdata(portdev); - - put_device(&hwif->gendev); -} - int ide_vlb_clk; EXPORT_SYMBOL_GPL(ide_vlb_clk); @@ -1305,7 +1298,6 @@ static int __init ide_init(void) ret = PTR_ERR(ide_port_class); goto out_port_class; } - ide_port_class->dev_release = ide_port_class_release; init_ide_data(); diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 5c730e4dd73..9a1d27ef3f8 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -138,6 +138,8 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 9e449a0c623..af11028b479 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -81,6 +81,8 @@ static void __init falconide_setup_ports(hw_regs_t *hw) hw->irq = IRQ_MFP_IDE; hw->ack_intr = NULL; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index a9c2593a898..fed7d812761 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -16,6 +16,7 @@ #include <linux/ide.h> #include <linux/init.h> #include <linux/zorro.h> +#include <linux/module.h> #include <asm/setup.h> #include <asm/amigahw.h> @@ -62,7 +63,10 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) + int ide_doubler = 0; /* support IDE doublers? */ +EXPORT_SYMBOL_GPL(ide_doubler); + module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ @@ -112,6 +116,8 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index aa2ea3deac8..3381424d70a 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -135,13 +135,17 @@ static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; ide_hwif_t *hwif = info->hwif; + unsigned long data_addr, ctl_addr; DEBUG(0, "ide_detach(0x%p)\n", link); + data_addr = hwif->io_ports.data_addr; + ctl_addr = hwif->io_ports.ctl_addr; + ide_release(link); - release_region(hwif->io_ports.ctl_addr, 1); - release_region(hwif->io_ports.data_addr, 8); + release_region(ctl_addr, 1); + release_region(data_addr, 8); kfree(info); } /* ide_detach */ @@ -194,6 +198,16 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, if (hwif->present) return hwif; + /* retry registration in case device is still spinning up */ + for (i = 0; i < 10; i++) { + msleep(100); + ide_port_scan(hwif); + if (hwif->present) + return hwif; + } + + return hwif; + out_release: release_region(ctl, 1); release_region(io, 8); @@ -222,7 +236,7 @@ static int ide_config(struct pcmcia_device *link) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int i, pass, last_ret = 0, last_fn = 0, is_kme = 0; + int pass, last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; ide_hwif_t *hwif; @@ -319,30 +333,15 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - /* retry registration in case device is still spinning up */ - for (i = 0; i < 10; i++) { - hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (hwif) - break; - if (link->io.NumPorts1 == 0x20) { + hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + if (hwif == NULL && link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); hwif = idecs_register(io_base + 0x10, ctl_base + 0x10, link->irq.AssignedIRQ, link); - if (hwif) { - io_base += 0x10; - ctl_base += 0x10; - break; - } - } - msleep(100); } - if (hwif == NULL) { - printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx" - ", irq %u failed\n", io_base, ctl_base, - link->irq.AssignedIRQ); + if (hwif == NULL) goto failed; - } info->ndev = 1; sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2); @@ -411,6 +410,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ @@ -440,6 +440,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), @@ -450,6 +451,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index caa2632dd08..2e84290d0bc 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -78,6 +78,8 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static const char *mac_ide_name[] = diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 6f535d00e63..8ff6e2d2083 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -70,6 +70,8 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static void q40ide_input_data(ide_drive_t *drive, struct request *rq, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index aaf38109eae..b38a1980dcd 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -747,9 +747,11 @@ static int __init cmd640x_init(void) ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); hw[0].irq = 14; + hw[0].chipset = ide_cmd640; ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; + hw[1].chipset = ide_cmd640; printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index b9e457996d0..af0f30051d5 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -47,13 +47,18 @@ static const struct ide_port_ops delkin_cb_port_ops = { .quirkproc = ide_undecoded_slave, }; +static const struct ide_port_info delkin_cb_port_info = { + .port_ops = &delkin_cb_port_ops, + .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | + IDE_HFLAG_NO_DMA, +}; + static int __devinit delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) { unsigned long base; hw_regs_t hw; ide_hwif_t *hwif = NULL; - ide_drive_t *drive; int i, rc; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -79,6 +84,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base + 0x10, base + 0x1e); hw.irq = dev->irq; + hw.dev = &dev->dev; hw.chipset = ide_pci; /* this enables IRQ sharing */ hwif = ide_find_port(); @@ -89,26 +95,16 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->port_ops = &delkin_cb_port_ops; idx[0] = i; - ide_device_add(idx, NULL); - - if (!hwif->present) - goto out_disable; + ide_device_add(idx, &delkin_cb_port_info); pci_set_drvdata(dev, hwif); - hwif->dev = &dev->dev; - drive = &hwif->drives[0]; - if (drive->present) { - drive->io_32bit = 1; - drive->unmask = 1; - } + return 0; out_disable: - printk(KERN_ERR "delkin_cb: no IDE devices found\n"); pci_release_regions(dev); pci_disable_device(dev); return -ENODEV; @@ -139,14 +135,12 @@ static struct pci_driver driver = { .remove = delkin_cb_remove, }; -static int -delkin_cb_init (void) +static int __init delkin_cb_init(void) { return pci_register_driver(&driver); } -static void -delkin_cb_exit (void) +static void __exit delkin_cb_exit(void) { pci_unregister_driver(&driver); } diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 6e99080497b..725c80508d9 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -81,8 +81,6 @@ * 0.5 doesn't work. */ -#define OPTI621_DEBUG /* define for debug messages */ - #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> @@ -92,28 +90,6 @@ #include <asm/io.h> -//#define OPTI621_MAX_PIO 3 -/* In fact, I do not have any PIO 4 drive - * (address: 25 ns, data: 70 ns, recovery: 35 ns), - * but OPTi 82C621 is programmable and it can do (minimal values): - * on 40MHz PCI bus (pulse 25 ns): - * address: 25 ns, data: 25 ns, recovery: 50 ns; - * on 20MHz PCI bus (pulse 50 ns): - * address: 50 ns, data: 50 ns, recovery: 100 ns. - */ - -/* #define READ_PREFETCH 0 */ -/* Uncomment for disable read prefetch. - * There is some readprefetch capatibility in hdparm, - * but when I type hdparm -P 1 /dev/hda, I got errors - * and till reset drive is inaccessible. - * This (hw) read prefetch is safe on my drive. - */ - -#ifndef READ_PREFETCH -#define READ_PREFETCH 0x40 /* read prefetch is enabled */ -#endif /* else read prefetch is disabled */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -122,51 +98,8 @@ static int reg_base; -#define PIO_NOT_EXIST 254 -#define PIO_DONT_KNOW 255 - static DEFINE_SPINLOCK(opti621_lock); -/* there are stored pio numbers from other calls of opti621_set_pio_mode */ -static void compute_pios(ide_drive_t *drive, const u8 pio) -/* Store values into drive->drive_data - * second_contr - 0 for primary controller, 1 for secondary - * slave_drive - 0 -> pio is for master, 1 -> pio is for slave - * pio - PIO mode for selected drive (for other we don't know) - */ -{ - int d; - ide_hwif_t *hwif = HWIF(drive); - - drive->drive_data = pio; - - for (d = 0; d < 2; ++d) { - drive = &hwif->drives[d]; - if (drive->present) { - if (drive->drive_data == PIO_DONT_KNOW) - drive->drive_data = ide_get_best_pio_mode(drive, 255, 3); -#ifdef OPTI621_DEBUG - printk("%s: Selected PIO mode %d\n", - drive->name, drive->drive_data); -#endif - } else { - drive->drive_data = PIO_NOT_EXIST; - } - } -} - -static int cmpt_clk(int time, int bus_speed) -/* Returns (rounded up) time in clocks for time in ns, - * with bus_speed in MHz. - * Example: bus_speed = 40 MHz, time = 80 ns - * 1000/40 = 25 ns (clk value), - * 80/25 = 3.2, rounded up to 4 (I hope ;-)). - * Use idebus=xx to select right frequency. - */ -{ - return ((time*bus_speed+999)/1000); -} - /* Write value to register reg, base of register * is at reg_base (0x1f0 primary, 0x170 secondary, * if not changed by PCI configuration). @@ -199,83 +132,29 @@ static u8 read_reg(int reg) return ret; } -typedef struct pio_clocks_s { - int address_time; /* Address setup (clocks) */ - int data_time; /* Active/data pulse (clocks) */ - int recovery_time; /* Recovery time (clocks) */ -} pio_clocks_t; - -static void compute_clocks(int pio, pio_clocks_t *clks) -{ - if (pio != PIO_NOT_EXIST) { - int adr_setup, data_pls; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); - - adr_setup = ide_pio_timings[pio].setup_time; - data_pls = ide_pio_timings[pio].active_time; - clks->address_time = cmpt_clk(adr_setup, bus_speed); - clks->data_time = cmpt_clk(data_pls, bus_speed); - clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time - - adr_setup-data_pls, bus_speed); - if (clks->address_time < 1) - clks->address_time = 1; - if (clks->address_time > 4) - clks->address_time = 4; - if (clks->data_time < 1) - clks->data_time = 1; - if (clks->data_time > 16) - clks->data_time = 16; - if (clks->recovery_time < 2) - clks->recovery_time = 2; - if (clks->recovery_time > 17) - clks->recovery_time = 17; - } else { - clks->address_time = 1; - clks->data_time = 1; - clks->recovery_time = 2; - /* minimal values */ - } -} - static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { - /* primary and secondary drives share some registers, - * so we have to program both drives - */ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - u8 pio1 = 0, pio2 = 0; - pio_clocks_t first, second; - int ax, drdy; - u8 cycle1, cycle2, misc; - ide_hwif_t *hwif = HWIF(drive); - - /* sets drive->drive_data for both drives */ - compute_pios(drive, pio); - pio1 = hwif->drives[0].drive_data; - pio2 = hwif->drives[1].drive_data; - - compute_clocks(pio1, &first); - compute_clocks(pio2, &second); - - /* ax = max(a1,a2) */ - ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; - - drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ - - cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); - misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1); - -#ifdef OPTI621_DEBUG - printk("%s: master: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, first.data_time, - first.recovery_time, drdy); - printk("%s: slave: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, second.data_time, - second.recovery_time, drdy); -#endif + u8 tim, misc, addr_pio = pio, clk; + + /* DRDY is default 2 (by OPTi Databook) */ + static const u8 addr_timings[2][5] = { + { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */ + }; + static const u8 data_rec_timings[2][5] = { + { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ + }; + + drive->drive_data = XFER_PIO_0 + pio; + + if (pair->present) { + if (pair->drive_data && pair->drive_data < drive->drive_data) + addr_pio = pair->drive_data - XFER_PIO_0; + } spin_lock_irqsave(&opti621_lock, flags); @@ -289,24 +168,21 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) (void)inb(reg_base + CNTRL_REG); /* if reads 0xc0, no interface exist? */ read_reg(CNTRL_REG); - /* read version, probably 0 */ - read_reg(STRAP_REG); - /* program primary drive */ - /* select Index-0 for Register-A */ - write_reg(0, MISC_REG); - /* set read cycle timings */ - write_reg(cycle1, READ_REG); - /* set write cycle timings */ - write_reg(cycle1, WRITE_REG); + /* check CLK speed */ + clk = read_reg(STRAP_REG) & 1; + + printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - /* program secondary drive */ - /* select Index-1 for Register-B */ - write_reg(1, MISC_REG); + tim = data_rec_timings[clk][pio]; + misc = addr_timings[clk][addr_pio]; + + /* select Index-0/1 for Register-A/B */ + write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ - write_reg(cycle2, READ_REG); + write_reg(tim, READ_REG); /* set write cycle timings */ - write_reg(cycle2, WRITE_REG); + write_reg(tim, WRITE_REG); /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ @@ -319,45 +195,26 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&opti621_lock, flags); } -static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) -{ - hwif->drives[0].drive_data = PIO_DONT_KNOW; - hwif->drives[1].drive_data = PIO_DONT_KNOW; -} - static const struct ide_port_ops opti621_port_ops = { - .port_init_devs = opti621_port_init_devs, .set_pio_mode = opti621_set_pio_mode, }; -static const struct ide_port_info opti621_chipsets[] __devinitdata = { - { /* 0 */ - .name = "OPTI621", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, - .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - }, { /* 1 */ - .name = "OPTI621X", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, - .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - } +static const struct ide_port_info opti621_chipset __devinitdata = { + .name = "OPTI621/X", + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, + .pio_mask = ATA_PIO4, }; static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]); + return ide_setup_pci_device(dev, &opti621_chipset); } static const struct pci_device_id opti621_pci_tbl[] = { { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 }, + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 4b0b85d8faf..e127eb25ab6 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -569,6 +569,11 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi { struct ide_port_info d = sis5513_chipset; u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; if (sis_find_family(dev) == 0) return -ENOTSUPP; diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index f0e638dcc3a..236f9c38e51 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -303,6 +303,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) pcmp->pcmc_per = 0x100000 >> (16 * _slot_); #endif /* CONFIG_IDE_8xx_PCCARD */ + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ @@ -377,6 +379,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= (0x80000000 >> ioport_dsc[data_port].irq); + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_DIRECT */ diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 48aa019127b..ba2d5872796 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -59,7 +59,6 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned cable_80 : 1; unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; @@ -918,10 +917,40 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) +{ + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif); + struct device_node *np = pmif->node; + const char *cable = of_get_property(np, "cable-type", NULL); + + /* Get cable type from device-tree. */ + if (cable && !strncmp(cable, "80-", 3)) + return ATA_CBL_PATA80; + + /* + * G5's seem to have incorrect cable type in device-tree. + * Let's assume they have a 80 conductor cable, this seem + * to be always the case unless the user mucked around. + */ + if (of_device_is_compatible(np, "K2-UATA") || + of_device_is_compatible(np, "shasta-ata")) + return ATA_CBL_PATA80; + + return ATA_CBL_PATA40; +} + static const struct ide_port_ops pmac_ide_ata6_port_ops = { .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_kauai_selectproc, + .cable_detect = pmac_ide_cable_detect, +}; + +static const struct ide_port_ops pmac_ide_ata4_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, + .cable_detect = pmac_ide_cable_detect, }; static const struct ide_port_ops pmac_ide_port_ops = { @@ -949,10 +978,7 @@ static const struct ide_port_info pmac_port_info = { /* * Setup, register & probe an IDE channel driven by this driver, this is - * called by one of the 2 probe functions (macio or PCI). Note that a channel - * that ends up beeing free of any device is not kept around by this driver - * (it is kept in 2.4). This introduce an interface numbering change on some - * rare machines unfortunately, but it's better this way. + * called by one of the 2 probe functions (macio or PCI). */ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) @@ -962,7 +988,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = pmac_port_info; - pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; @@ -979,6 +1004,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA4; } else pmif->kind = controller_kl_ata3; @@ -992,22 +1018,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) bidp = of_get_property(np, "AAPL,bus-id", NULL); pmif->aapl_bus_id = bidp ? *bidp : 0; - /* Get cable type from device-tree */ - if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) { - const char* cable = of_get_property(np, "cable-type", NULL); - if (cable && !strncmp(cable, "80-", 3)) - pmif->cable_80 = 1; - } - /* G5's seem to have incorrect cable type in device-tree. Let's assume - * they have a 80 conductor cable, this seem to be always the case unless - * the user mucked around - */ - if (of_device_is_compatible(np, "K2-UATA") || - of_device_is_compatible(np, "shasta-ata")) - pmif->cable_80 = 1; - /* On Kauai-type controllers, we make sure the FCR is correct */ if (pmif->kauai_fcr) writel(KAUAI_FCR_UATA_MAGIC | @@ -1053,7 +1063,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) hwif->hwif_data = pmif; ide_init_port_hw(hwif, hw); - hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, @@ -1070,11 +1079,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - if (pmif->cable_80 == 0) - d.udma_mask &= ATA_UDMA2; -#endif - idx[0] = hwif->index; ide_device_add(idx, &d); |