diff options
Diffstat (limited to 'drivers/ide')
73 files changed, 1181 insertions, 1301 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 87532034d10..3f9e10001e1 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1031,7 +1031,7 @@ comment "Other IDE chipsets support" comment "Note: most of these also require special kernel boot parameters" config BLK_DEV_4DRIVES - bool "Generic 4 drives/port support" + tristate "Generic 4 drives/port support" help Certain older chipsets, including the Tekram 690CD, use a single set of I/O ports at 0x1f0 to control up to four drives, instead of the diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index ec46c44b061..a80b9574865 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -21,6 +21,8 @@ #include <asm/arch/bast-map.h> #include <asm/arch/bast-irq.h> +#define DRV_NAME "bast-ide" + static int __init bastide_register(unsigned int base, unsigned int aux, int irq) { ide_hwif_t *hwif; @@ -41,7 +43,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); hw.irq = irq; - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) goto out; @@ -53,6 +55,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); + hwif->mmio = 1; hwif->quirkproc = NULL; idx[0] = i; @@ -64,6 +67,8 @@ out: static int __init bastide_init(void) { + unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; + /* we can treat the VR1000 and the BAST the same */ if (!(machine_is_bast() || machine_is_vr1000())) @@ -71,6 +76,11 @@ static int __init bastide_init(void) printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); + if (!request_mem_region(base, 0x400000, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index e816b0ffcfe..fd12bbe93f1 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -400,7 +400,7 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e unsigned long port = (unsigned long)base + info->dataoffset; ide_hwif_t *hwif; - hwif = ide_find_port(port); + hwif = ide_find_port(); if (hwif) { int i; diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index be9ff7334c5..82643df7c49 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -34,7 +34,7 @@ static int __init ide_arm_init(void) ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); hw.irq = IDE_ARM_IRQ; - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { ide_init_port_hw(hwif, &hw); idx[0] = hwif->index; diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 420fcb78a7c..666df779a5f 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -96,11 +96,11 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, u16 val16; /* DMA Data Setup */ - t0 = (palm_bk3710_udmatimings[mode].cycletime + ide_palm_clk - 1) - / ide_palm_clk - 1; - tenv = (20 + ide_palm_clk - 1) / ide_palm_clk - 1; - trp = (palm_bk3710_udmatimings[mode].rptime + ide_palm_clk - 1) - / ide_palm_clk - 1; + t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime, + ide_palm_clk) - 1; + tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1; + trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime, + ide_palm_clk) - 1; /* udmatim Register */ val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); @@ -141,8 +141,8 @@ static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev, cycletime = max_t(int, t->cycle, min_cycle); /* DMA Data Setup */ - t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; - td = (t->active + ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(cycletime, ide_palm_clk); + td = DIV_ROUND_UP(t->active, ide_palm_clk); tkw = t0 - td - 1; td -= 1; @@ -168,9 +168,9 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, struct ide_timing *t; /* PIO Data Setup */ - t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; - t2 = (ide_timing_find_mode(XFER_PIO_0 + mode)->active + - ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(cycletime, ide_palm_clk); + t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active, + ide_palm_clk); t2i = t0 - t2 - 1; t2 -= 1; @@ -192,8 +192,8 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, /* TASKFILE Setup */ t = ide_timing_find_mode(XFER_PIO_0 + mode); - t0 = (t->cyc8b + ide_palm_clk - 1) / ide_palm_clk; - t2 = (t->act8b + ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk); + t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk); t2i = t0 - t2 - 1; t2 -= 1; @@ -378,7 +378,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) hw.irq = irq->start; hw.chipset = ide_palm3710; - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) goto out; diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index b30adcf321c..2c3d0ec91dc 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -44,7 +44,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) goto release; } - hwif = ide_find_port((unsigned long)base); + hwif = ide_find_port(); if (hwif) { memset(&hw, 0, sizeof(hw)); rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 31266d27809..790a7759d45 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -804,7 +804,7 @@ static int __init init_e100_ide(void) cris_setup_ports(&hw, cris_ide_base_address(h)); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) continue; ide_init_port_data(hwif, hwif->index); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 4108ec4ffa7..92b02b96d7d 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -99,8 +99,7 @@ static int __init h8300_ide_init(void) hw_setup(&hw); - /* register if */ - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) { printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); return -ENOENT; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index fe5aefbf833..1afd95ad465 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -13,8 +13,8 @@ * * Suggestions are welcome. Patches that work are more welcome though. ;-) * For those wishing to work on this driver, please be sure you download - * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI - * (SFF-8020i rev 2.6) standards. These documents can be obtained by + * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI + * (SFF-8020i rev 2.6) standards. These documents can be obtained by * anonymous ftp from: * ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps * ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf @@ -51,7 +51,7 @@ static DEFINE_MUTEX(idecd_ref_mutex); -#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref) +#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref) #define ide_cd_g(disk) \ container_of((disk)->private_data, struct cdrom_info, driver) @@ -83,13 +83,12 @@ static void ide_cd_put(struct cdrom_info *cd) /* Mark that we've seen a media change, and invalidate our internal buffers. */ -static void cdrom_saw_media_change (ide_drive_t *drive) +static void cdrom_saw_media_change(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; cd->cd_flags |= IDE_CD_FLAG_MEDIA_CHANGED; cd->cd_flags &= ~IDE_CD_FLAG_TOC_VALID; - cd->nsectors_buffered = 0; } static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, @@ -101,38 +100,39 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, return 0; switch (sense->sense_key) { - case NO_SENSE: case RECOVERED_ERROR: - break; - case NOT_READY: - /* - * don't care about tray state messages for - * e.g. capacity commands or in-progress or - * becoming ready - */ - if (sense->asc == 0x3a || sense->asc == 0x04) - break; - log = 1; - break; - case ILLEGAL_REQUEST: - /* - * don't log START_STOP unit with LoEj set, since - * we cannot reliably check if drive can auto-close - */ - if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24) - break; - log = 1; - break; - case UNIT_ATTENTION: - /* - * Make good and sure we've seen this potential media - * change. Some drives (i.e. Creative) fail to present - * the correct sense key in the error register. - */ - cdrom_saw_media_change(drive); + case NO_SENSE: + case RECOVERED_ERROR: + break; + case NOT_READY: + /* + * don't care about tray state messages for + * e.g. capacity commands or in-progress or + * becoming ready + */ + if (sense->asc == 0x3a || sense->asc == 0x04) break; - default: - log = 1; + log = 1; + break; + case ILLEGAL_REQUEST: + /* + * don't log START_STOP unit with LoEj set, since + * we cannot reliably check if drive can auto-close + */ + if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24) break; + log = 1; + break; + case UNIT_ATTENTION: + /* + * Make good and sure we've seen this potential media + * change. Some drives (i.e. Creative) fail to present + * the correct sense key in the error register. + */ + cdrom_saw_media_change(drive); + break; + default: + log = 1; + break; } return log; } @@ -159,8 +159,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, if (sense->sense_key == 0x05 && sense->asc == 0x24) return; - if (sense->error_code == 0x70) { /* Current Error */ - switch(sense->sense_key) { + if (sense->error_code == 0x70) { /* Current Error */ + switch (sense->sense_key) { case MEDIUM_ERROR: case VOLUME_OVERFLOW: case ILLEGAL_REQUEST: @@ -179,7 +179,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, bio_sectors = 4; if (drive->queue->hardsect_size == 2048) sector <<= 2; /* Device sector size is 2K */ - sector &= ~(bio_sectors -1); + sector &= ~(bio_sectors - 1); valid = (sector - failed_command->sector) << 9; if (valid < 0) @@ -188,8 +188,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, drive->probed_capacity - sector < 4 * 75) { set_capacity(info->disk, sector); } - } - } + } + } ide_cd_log_error(drive->name, failed_command, sense); } @@ -230,7 +230,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, (void) ide_do_drive_cmd(drive, rq, ide_preempt); } -static void cdrom_end_request (ide_drive_t *drive, int uptodate) +static void cdrom_end_request(ide_drive_t *drive, int uptodate) { struct request *rq = HWGROUP(drive)->rq; int nsectors = rq->hard_cur_sectors; @@ -293,7 +293,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) { struct request *rq = HWGROUP(drive)->rq; int stat, err, sense_key; - + /* Check for errors. */ stat = ide_read_status(drive); @@ -334,26 +334,26 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) /* Check for tray open. */ if (sense_key == NOT_READY) { - cdrom_saw_media_change (drive); + cdrom_saw_media_change(drive); } else if (sense_key == UNIT_ATTENTION) { /* Check for media change. */ - cdrom_saw_media_change (drive); + cdrom_saw_media_change(drive); /*printk("%s: media changed\n",drive->name);*/ return 0; - } else if ((sense_key == ILLEGAL_REQUEST) && - (rq->cmd[0] == GPCMD_START_STOP_UNIT)) { - /* - * Don't print error message for this condition-- - * SFF8090i indicates that 5/24/00 is the correct - * response to a request to close the tray if the - * drive doesn't have that capability. - * cdrom_log_sense() knows this! - */ + } else if (sense_key == ILLEGAL_REQUEST && + rq->cmd[0] == GPCMD_START_STOP_UNIT) { + /* + * Don't print error message for this condition-- + * SFF8090i indicates that 5/24/00 is the correct + * response to a request to close the tray if the + * drive doesn't have that capability. + * cdrom_log_sense() knows this! + */ } else if (!(rq->cmd_flags & REQ_QUIET)) { /* Otherwise, print an error. */ ide_dump_status(drive, "packet command error", stat); } - + rq->cmd_flags |= REQ_FAILED; /* @@ -374,10 +374,10 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) if (sense_key == NOT_READY) { /* Tray open. */ if (rq_data_dir(rq) == READ) { - cdrom_saw_media_change (drive); + cdrom_saw_media_change(drive); /* Fail the request. */ - printk ("%s: tray open\n", drive->name); + printk("%s: tray open\n", drive->name); do_end_request = 1; } else { struct cdrom_info *info = drive->driver_data; @@ -399,7 +399,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) */ spin_lock_irqsave(&ide_lock, flags); blk_plug_device(drive->queue); - spin_unlock_irqrestore(&ide_lock,flags); + spin_unlock_irqrestore(&ide_lock, flags); return 1; } } @@ -407,25 +407,31 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) /* Media change. */ cdrom_saw_media_change (drive); - /* Arrange to retry the request. - But be sure to give up if we've retried - too many times. */ + /* + * Arrange to retry the request. + * But be sure to give up if we've retried + * too many times. + */ if (++rq->errors > ERROR_MAX) do_end_request = 1; } else if (sense_key == ILLEGAL_REQUEST || sense_key == DATA_PROTECT) { - /* No point in retrying after an illegal - request or data protect error.*/ - ide_dump_status_no_sense (drive, "command error", stat); + /* + * No point in retrying after an illegal + * request or data protect error. + */ + ide_dump_status_no_sense(drive, "command error", stat); do_end_request = 1; } else if (sense_key == MEDIUM_ERROR) { - /* No point in re-trying a zillion times on a bad - * sector... If we got here the error is not correctable */ - ide_dump_status_no_sense (drive, "media error (bad sector)", stat); + /* + * No point in re-trying a zillion times on a bad + * sector... If we got here the error is not correctable + */ + ide_dump_status_no_sense(drive, "media error (bad sector)", stat); do_end_request = 1; } else if (sense_key == BLANK_CHECK) { /* Disk appears blank ?? */ - ide_dump_status_no_sense (drive, "media error (blank)", stat); + ide_dump_status_no_sense(drive, "media error (blank)", stat); do_end_request = 1; } else if ((err & ~ABRT_ERR) != 0) { /* Go to the default handler @@ -486,18 +492,18 @@ static int cdrom_timer_expiry(ide_drive_t *drive) * ide_timer_expiry keep polling us for these. */ switch (rq->cmd[0]) { - case GPCMD_BLANK: - case GPCMD_FORMAT_UNIT: - case GPCMD_RESERVE_RZONE_TRACK: - case GPCMD_CLOSE_TRACK: - case GPCMD_FLUSH_CACHE: - wait = ATAPI_WAIT_PC; - break; - default: - if (!(rq->cmd_flags & REQ_QUIET)) - printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", rq->cmd[0]); - wait = 0; - break; + case GPCMD_BLANK: + case GPCMD_FORMAT_UNIT: + case GPCMD_RESERVE_RZONE_TRACK: + case GPCMD_CLOSE_TRACK: + case GPCMD_FLUSH_CACHE: + wait = ATAPI_WAIT_PC; + break; + default: + if (!(rq->cmd_flags & REQ_QUIET)) + printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", rq->cmd[0]); + wait = 0; + break; } return wait; } @@ -557,7 +563,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, HANDLER is the interrupt handler to call when the command completes or there's data ready. */ #define ATAPI_MIN_CDB_BYTES 12 -static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, +static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, struct request *rq, ide_handler_t *handler) { @@ -626,47 +632,6 @@ static void ide_cd_drain_data(ide_drive_t *drive, int nsects) } /* - * Buffer up to SECTORS_TO_TRANSFER sectors from the drive in our sector - * buffer. Once the first sector is added, any subsequent sectors are - * assumed to be continuous (until the buffer is cleared). For the first - * sector added, SECTOR is its sector number. (SECTOR is then ignored until - * the buffer is cleared.) - */ -static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector, - int sectors_to_transfer) -{ - struct cdrom_info *info = drive->driver_data; - - /* Number of sectors to read into the buffer. */ - int sectors_to_buffer = min_t(int, sectors_to_transfer, - (SECTOR_BUFFER_SIZE >> SECTOR_BITS) - - info->nsectors_buffered); - - char *dest; - - /* If we couldn't get a buffer, don't try to buffer anything... */ - if (info->buffer == NULL) - sectors_to_buffer = 0; - - /* If this is the first sector in the buffer, remember its number. */ - if (info->nsectors_buffered == 0) - info->sector_buffered = sector; - - /* Read the data into the buffer. */ - dest = info->buffer + info->nsectors_buffered * SECTOR_SIZE; - while (sectors_to_buffer > 0) { - HWIF(drive)->atapi_input_bytes(drive, dest, SECTOR_SIZE); - --sectors_to_buffer; - --sectors_to_transfer; - ++info->nsectors_buffered; - dest += SECTOR_SIZE; - } - - /* Throw away any remaining data. */ - ide_cd_drain_data(drive, sectors_to_transfer); -} - -/* * Check the contents of the interrupt reason register from the cdrom * and attempt to recover if there are problems. Returns 0 if everything's * ok; nonzero if the request has been terminated. @@ -686,7 +651,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, /* Whoops... */ printk(KERN_ERR "%s: %s: wrong transfer direction!\n", - drive->name, __FUNCTION__); + drive->name, __func__); xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes; ide_cd_pad_transfer(drive, xf, len); @@ -699,7 +664,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, } else { /* Drive wants a command packet, or invalid ireason... */ printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n", - drive->name, __FUNCTION__, ireason); + drive->name, __func__, ireason); } if (rq->cmd_type == REQ_TYPE_ATA_PC) @@ -721,7 +686,7 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) return 0; printk(KERN_ERR "%s: %s: Bad transfer size %d\n", - drive->name, __FUNCTION__, len); + drive->name, __func__, len); if (cd->cd_flags & IDE_CD_FLAG_LIMIT_NFRAMES) printk(KERN_ERR " This drive is not supported by " @@ -734,65 +699,6 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) return 1; } -/* - * Try to satisfy some of the current read request from our cached data. - * Returns nonzero if the request has been completed, zero otherwise. - */ -static int cdrom_read_from_buffer (ide_drive_t *drive) -{ - struct cdrom_info *info = drive->driver_data; - struct request *rq = HWGROUP(drive)->rq; - unsigned short sectors_per_frame; - - sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; - - /* Can't do anything if there's no buffer. */ - if (info->buffer == NULL) return 0; - - /* Loop while this request needs data and the next block is present - in our cache. */ - while (rq->nr_sectors > 0 && - rq->sector >= info->sector_buffered && - rq->sector < info->sector_buffered + info->nsectors_buffered) { - if (rq->current_nr_sectors == 0) - cdrom_end_request(drive, 1); - - memcpy (rq->buffer, - info->buffer + - (rq->sector - info->sector_buffered) * SECTOR_SIZE, - SECTOR_SIZE); - rq->buffer += SECTOR_SIZE; - --rq->current_nr_sectors; - --rq->nr_sectors; - ++rq->sector; - } - - /* If we've satisfied the current request, - terminate it successfully. */ - if (rq->nr_sectors == 0) { - cdrom_end_request(drive, 1); - return -1; - } - - /* Move on to the next buffer if needed. */ - if (rq->current_nr_sectors == 0) - cdrom_end_request(drive, 1); - - /* If this condition does not hold, then the kluge i use to - represent the number of sectors to skip at the start of a transfer - will fail. I think that this will never happen, but let's be - paranoid and check. */ - if (rq->current_nr_sectors < bio_cur_sectors(rq->bio) && - (rq->sector & (sectors_per_frame - 1))) { - printk(KERN_ERR "%s: cdrom_read_from_buffer: buffer botch (%ld)\n", - drive->name, (long)rq->sector); - cdrom_end_request(drive, 0); - return -1; - } - - return 0; -} - static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); /* @@ -825,7 +731,7 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) if (rq->current_nr_sectors != bio_cur_sectors(rq->bio)) { printk(KERN_ERR "%s: %s: buffer botch (%u)\n", - drive->name, __FUNCTION__, + drive->name, __func__, rq->current_nr_sectors); cdrom_end_request(drive, 0); return ide_stopped; @@ -849,7 +755,7 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) #define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */ #define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */ -static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive) +static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; int stat; @@ -866,14 +772,14 @@ static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive) * this condition is far too common, to bother * users about it */ - /* printk("%s: disabled DSC seek overlap\n", drive->name);*/ + /* printk("%s: disabled DSC seek overlap\n", drive->name);*/ drive->dsc_overlap = 0; } } return ide_stopped; } -static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive) +static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; sector_t frame = rq->sector; @@ -888,7 +794,7 @@ static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block) +static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) { struct cdrom_info *info = drive->driver_data; @@ -897,9 +803,11 @@ static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block) return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation); } -/* Fix up a possibly partially-processed request so that we can - start it over entirely, or even put it back on the request queue. */ -static void restore_request (struct request *rq) +/* + * Fix up a possibly partially-processed request so that we can + * start it over entirely, or even put it back on the request queue. + */ +static void restore_request(struct request *rq) { if (rq->buffer != bio_data(rq->bio)) { sector_t n = (rq->buffer - (char *) bio_data(rq->bio)) / SECTOR_SIZE; @@ -950,7 +858,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) error = ide_do_drive_cmd(drive, rq, ide_wait); time = jiffies - time; - /* FIXME: we should probably abort/retry or something + /* FIXME: we should probably abort/retry or something * in case of failure */ if (rq->cmd_flags & REQ_FAILED) { /* The request failed. Retry if it was due to a unit @@ -1057,7 +965,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (rq->current_nr_sectors > 0) { printk(KERN_ERR "%s: %s: data underrun " "(%d blocks)\n", - drive->name, __FUNCTION__, + drive->name, __func__, rq->current_nr_sectors); if (!write) rq->cmd_flags |= REQ_FAILED; @@ -1134,11 +1042,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (!ptr) { if (blk_fs_request(rq) && !write) /* - * If the buffers are full, cache the rest - * of the data in our internal buffer. - */ - cdrom_buffer_sectors(drive, rq->sector, - thislen >> 9); + * If the buffers are full, pipe the rest into + * oblivion. */ + ide_cd_drain_data(drive, thislen >> 9); else { printk(KERN_ERR "%s: confused, missing data\n", drive->name); @@ -1243,10 +1149,6 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) * weirdness which might be present in the request packet. */ restore_request(rq); - - /* Satisfy whatever we can of this request from our cache. */ - if (cdrom_read_from_buffer(drive)) - return ide_stopped; } /* @@ -1262,9 +1164,6 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) } else cd->dma = drive->using_dma; - /* Clear the local sector buffer. */ - cd->nsectors_buffered = 0; - if (write) cd->devinfo.media_written = 1; @@ -1320,7 +1219,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * cdrom driver request routine. */ static ide_startstop_t -ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) +ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) { ide_startstop_t action; struct cdrom_info *info = drive->driver_data; @@ -1335,13 +1234,13 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) ide_stall_queue(drive, IDECD_SEEK_TIMER); return ide_stopped; } - printk (KERN_ERR "%s: DSC timeout\n", drive->name); + printk(KERN_ERR "%s: DSC timeout\n", drive->name); } info->cd_flags &= ~IDE_CD_FLAG_SEEKING; } - if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) { + if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) action = cdrom_start_seek(drive, block); - } else + else action = cdrom_start_rw(drive, rq); info->last_block = block; return action; @@ -1374,7 +1273,7 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) */ static -void msf_from_bcd (struct atapi_msf *msf) +void msf_from_bcd(struct atapi_msf *msf) { msf->minute = BCD2BIN(msf->minute); msf->second = BCD2BIN(msf->second); @@ -1474,7 +1373,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) /* Try to allocate space. */ toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL); if (toc == NULL) { - printk (KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name); + printk(KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name); return -ENOMEM; } info->toc = toc; @@ -1569,9 +1468,9 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->ent[i].track = BCD2BIN(toc->ent[i].track); msf_from_bcd(&toc->ent[i].addr.msf); } - toc->ent[i].addr.lba = msf_to_lba (toc->ent[i].addr.msf.minute, - toc->ent[i].addr.msf.second, - toc->ent[i].addr.msf.frame); + toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute, + toc->ent[i].addr.msf.second, + toc->ent[i].addr.msf.frame); } /* Read the multisession information. */ @@ -1595,9 +1494,9 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) if (stat) return stat; - msf_from_bcd (&ms_tmp.ent.addr.msf); + msf_from_bcd(&ms_tmp.ent.addr.msf); toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute, - ms_tmp.ent.addr.msf.second, + ms_tmp.ent.addr.msf.second, ms_tmp.ent.addr.msf.frame); } @@ -1679,7 +1578,7 @@ static struct cdrom_device_ops ide_cdrom_dops = { .generic_packet = ide_cdrom_packet, }; -static int ide_cdrom_register (ide_drive_t *drive, int nslots) +static int ide_cdrom_register(ide_drive_t *drive, int nslots) { struct cdrom_info *info = drive->driver_data; struct cdrom_device_info *devinfo = &info->devinfo; @@ -1698,7 +1597,7 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots) } static -int ide_cdrom_probe_capabilities (ide_drive_t *drive) +int ide_cdrom_probe_capabilities(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; @@ -1870,7 +1769,7 @@ static int ide_cdrom_prep_pc(struct request *rq) rq->errors = ILLEGAL_REQUEST; return BLKPREP_KILL; } - + return BLKPREP_OK; } @@ -1948,7 +1847,7 @@ static unsigned int ide_cd_flags(struct hd_driveid *id) } static -int ide_cdrom_setup (ide_drive_t *drive) +int ide_cdrom_setup(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; @@ -1979,7 +1878,7 @@ int ide_cdrom_setup (ide_drive_t *drive) else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD) cdi->sanyo_slot = 3; /* 3 => use CD in slot 0 */ - nslots = ide_cdrom_probe_capabilities (drive); + nslots = ide_cdrom_probe_capabilities(drive); /* * set correct block size @@ -1991,7 +1890,7 @@ int ide_cdrom_setup (ide_drive_t *drive) drive->dsc_overlap = (drive->next != drive); if (ide_cdrom_register(drive, nslots)) { - printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name); + printk(KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name); cd->devinfo.handle = NULL; return 1; } @@ -1999,19 +1898,6 @@ int ide_cdrom_setup (ide_drive_t *drive) return 0; } -#ifdef CONFIG_IDE_PROC_FS -static -sector_t ide_cdrom_capacity (ide_drive_t *drive) -{ - unsigned long capacity, sectors_per_frame; - - if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL)) - return 0; - - return capacity * sectors_per_frame; -} -#endif - static void ide_cd_remove(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; @@ -2030,7 +1916,6 @@ static void ide_cd_release(struct kref *kref) ide_drive_t *drive = info->drive; struct gendisk *g = info->disk; - kfree(info->buffer); kfree(info->toc); if (devinfo->handle == drive) unregister_cdrom(devinfo); @@ -2045,14 +1930,24 @@ static void ide_cd_release(struct kref *kref) static int ide_cd_probe(ide_drive_t *); #ifdef CONFIG_IDE_PROC_FS +static sector_t ide_cdrom_capacity(ide_drive_t *drive) +{ + unsigned long capacity, sectors_per_frame; + + if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL)) + return 0; + + return capacity * sectors_per_frame; +} + static int proc_idecd_read_capacity (char *page, char **start, off_t off, int count, int *eof, void *data) { ide_drive_t *drive = data; int len; - len = sprintf(page,"%llu\n", (long long)ide_cdrom_capacity(drive)); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive)); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static ide_proc_entry_t idecd_proc[] = { @@ -2081,20 +1976,17 @@ static ide_driver_t ide_cdrom_driver = { #endif }; -static int idecd_open(struct inode * inode, struct file * file) +static int idecd_open(struct inode *inode, struct file *file) { struct gendisk *disk = inode->i_bdev->bd_disk; struct cdrom_info *info; int rc = -ENOMEM; - if (!(info = ide_cd_get(disk))) + info = ide_cd_get(disk); + if (!info) return -ENXIO; - if (!info->buffer) - info->buffer = kmalloc(SECTOR_BUFFER_SIZE, GFP_KERNEL|__GFP_REPEAT); - - if (info->buffer) - rc = cdrom_open(&info->devinfo, inode, file); + rc = cdrom_open(&info->devinfo, inode, file); if (rc < 0) ide_cd_put(info); @@ -2102,12 +1994,12 @@ static int idecd_open(struct inode * inode, struct file * file) return rc; } -static int idecd_release(struct inode * inode, struct file * file) +static int idecd_release(struct inode *inode, struct file *file) { struct gendisk *disk = inode->i_bdev->bd_disk; struct cdrom_info *info = ide_cd_g(disk); - cdrom_release (&info->devinfo, file); + cdrom_release(&info->devinfo, file); ide_cd_put(info); @@ -2139,7 +2031,7 @@ static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg) struct packet_command cgc; char buffer[16]; int stat; - char spindown; + char spindown; init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN); @@ -2148,12 +2040,12 @@ static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg) return stat; spindown = buffer[11] & 0x0f; - if (copy_to_user((void __user *)arg, &spindown, sizeof (char))) + if (copy_to_user((void __user *)arg, &spindown, sizeof(char))) return -EFAULT; return 0; } -static int idecd_ioctl (struct inode *inode, struct file *file, +static int idecd_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; @@ -2161,13 +2053,13 @@ static int idecd_ioctl (struct inode *inode, struct file *file, int err; switch (cmd) { - case CDROMSETSPINDOWN: + case CDROMSETSPINDOWN: return idecd_set_spindown(&info->devinfo, arg); - case CDROMGETSPINDOWN: + case CDROMGETSPINDOWN: return idecd_get_spindown(&info->devinfo, arg); default: break; - } + } err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg); if (err == -EINVAL) @@ -2193,16 +2085,16 @@ static int idecd_revalidate_disk(struct gendisk *disk) } static struct block_device_operations idecd_ops = { - .owner = THIS_MODULE, - .open = idecd_open, - .release = idecd_release, - .ioctl = idecd_ioctl, - .media_changed = idecd_media_changed, - .revalidate_disk= idecd_revalidate_disk + .owner = THIS_MODULE, + .open = idecd_open, + .release = idecd_release, + .ioctl = idecd_ioctl, + .media_changed = idecd_media_changed, + .revalidate_disk = idecd_revalidate_disk }; /* options */ -static char *ignore = NULL; +static char *ignore; module_param(ignore, charp, 0400); MODULE_DESCRIPTION("ATAPI CD-ROM Driver"); diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 22e3751a681..a58801c4484 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -119,10 +119,6 @@ struct cdrom_info { struct atapi_toc *toc; - unsigned long sector_buffered; - unsigned long nsectors_buffered; - unsigned char *buffer; - /* The result of the last successful request sense command on this device. */ struct request_sense sense_data; diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 39501d13025..8e08d083fce 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -16,8 +16,6 @@ #define IDEDISK_VERSION "1.18" -//#define DEBUG - #include <linux/module.h> #include <linux/types.h> #include <linux/string.h> @@ -88,7 +86,7 @@ static void ide_disk_put(struct ide_disk_obj *idkp) * * It is called only once for each drive. */ -static int lba_capacity_is_ok (struct hd_driveid *id) +static int lba_capacity_is_ok(struct hd_driveid *id) { unsigned long lba_sects, chs_sects, head, tail; @@ -176,7 +174,8 @@ static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma) * __ide_do_rw_disk() issues READ and WRITE commands to a disk, * using LBA if supported, or CHS otherwise, to address sectors. */ -static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) +static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, + sector_t block) { ide_hwif_t *hwif = HWIF(drive); unsigned int dma = drive->using_dma; @@ -228,7 +227,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->device = (block >> 8) & 0xf; } } else { - unsigned int sect,head,cyl,track; + unsigned int sect, head, cyl, track; + track = (int)block / drive->sect; sect = (int)block % drive->sect + 1; head = track % drive->head; @@ -271,7 +271,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, * 1073741822 == 549756 MB or 48bit addressing fake drive */ -static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) +static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, + sector_t block) { ide_hwif_t *hwif = HWIF(drive); @@ -452,7 +453,7 @@ static void idedisk_check_hpa(ide_drive_t *drive) * in above order (i.e., if value of higher priority is available, * reset will be ignored). */ -static void init_idedisk_capacity (ide_drive_t *drive) +static void init_idedisk_capacity(ide_drive_t *drive) { struct hd_driveid *id = drive->id; /* @@ -479,7 +480,7 @@ static void init_idedisk_capacity (ide_drive_t *drive) } } -static sector_t idedisk_capacity (ide_drive_t *drive) +static sector_t idedisk_capacity(ide_drive_t *drive) { return drive->capacity64 - drive->sect0; } @@ -524,10 +525,11 @@ static int proc_idedisk_read_cache int len; if (drive->id_read) - len = sprintf(out,"%i\n", drive->id->buf_size / 2); + len = sprintf(out, "%i\n", drive->id->buf_size / 2); else - len = sprintf(out,"(none)\n"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(out, "(none)\n"); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_idedisk_read_capacity @@ -536,54 +538,52 @@ static int proc_idedisk_read_capacity ide_drive_t*drive = (ide_drive_t *)data; int len; - len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive)); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(page, "%llu\n", (long long)idedisk_capacity(drive)); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } -static int proc_idedisk_read_smart_thresholds - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int proc_idedisk_read_smart(char *page, char **start, off_t off, + int count, int *eof, void *data, u8 sub_cmd) { ide_drive_t *drive = (ide_drive_t *)data; int len = 0, i = 0; - if (get_smart_data(drive, page, SMART_READ_THRESHOLDS) == 0) { + if (get_smart_data(drive, page, sub_cmd) == 0) { unsigned short *val = (unsigned short *) page; char *out = ((char *)val) + (SECTOR_WORDS * 4); page = out; do { - out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); + out += sprintf(out, "%04x%c", le16_to_cpu(*val), + (++i & 7) ? ' ' : '\n'); val += 1; } while (i < (SECTOR_WORDS * 2)); len = out - page; } - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } -static int proc_idedisk_read_smart_values +static int proc_idedisk_read_sv (char *page, char **start, off_t off, int count, int *eof, void *data) { - ide_drive_t *drive = (ide_drive_t *)data; - int len = 0, i = 0; + return proc_idedisk_read_smart(page, start, off, count, eof, data, + SMART_READ_VALUES); +} - if (get_smart_data(drive, page, SMART_READ_VALUES) == 0) { - unsigned short *val = (unsigned short *) page; - char *out = ((char *)val) + (SECTOR_WORDS * 4); - page = out; - do { - out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); - val += 1; - } while (i < (SECTOR_WORDS * 2)); - len = out - page; - } - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); +static int proc_idedisk_read_st + (char *page, char **start, off_t off, int count, int *eof, void *data) +{ + return proc_idedisk_read_smart(page, start, off, count, eof, data, + SMART_READ_THRESHOLDS); } static ide_proc_entry_t idedisk_proc[] = { - { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, - { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL }, - { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL }, + { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, + { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, + { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, + { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL }, + { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL }, { NULL, 0, NULL, NULL } }; #endif /* CONFIG_IDE_PROC_FS */ @@ -625,12 +625,13 @@ static int set_multcount(ide_drive_t *drive, int arg) if (drive->special.b.set_multmode) return -EBUSY; - ide_init_drive_cmd (&rq); + ide_init_drive_cmd(&rq); rq.cmd_type = REQ_TYPE_ATA_TASKFILE; drive->mult_req = arg; drive->special.b.set_multmode = 1; - (void) ide_do_drive_cmd (drive, &rq, ide_wait); + (void)ide_do_drive_cmd(drive, &rq, ide_wait); + return (drive->mult_count == arg) ? 0 : -EIO; } @@ -706,7 +707,7 @@ static int write_cache(ide_drive_t *drive, int arg) return err; } -static int do_idedisk_flushcache (ide_drive_t *drive) +static int do_idedisk_flushcache(ide_drive_t *drive) { ide_task_t args; @@ -719,7 +720,7 @@ static int do_idedisk_flushcache (ide_drive_t *drive) return ide_no_data_taskfile(drive, &args); } -static int set_acoustic (ide_drive_t *drive, int arg) +static int set_acoustic(ide_drive_t *drive, int arg) { ide_task_t args; @@ -753,7 +754,7 @@ static int set_lba_addressing(ide_drive_t *drive, int arg) return 0; if (!idedisk_supports_lba48(drive->id)) - return -EIO; + return -EIO; drive->addressing = arg; return 0; } @@ -763,23 +764,35 @@ static void idedisk_add_settings(ide_drive_t *drive) { struct hd_driveid *id = drive->id; - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); - ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1, &drive->addressing, set_lba_addressing); - ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, id->max_multsect, 1, 1, &drive->mult_count, set_multcount); - ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr); - ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL); - ide_add_setting(drive, "wcache", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache); - ide_add_setting(drive, "acoustic", SETTING_RW, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic); - ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL); - ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL); + ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, + &drive->bios_cyl, NULL); + ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &drive->bios_head, NULL); + ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, + &drive->bios_sect, NULL); + ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1, + &drive->addressing, set_lba_addressing); + ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, + id->max_multsect, 1, 1, &drive->mult_count, + set_multcount); + ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, + &drive->nowerr, set_nowerr); + ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1, + &drive->lun, NULL); + ide_add_setting(drive, "wcache", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, + &drive->wcache, write_cache); + ide_add_setting(drive, "acoustic", SETTING_RW, TYPE_BYTE, 0, 254, 1, 1, + &drive->acoustic, set_acoustic); + ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, + &drive->failures, NULL); + ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, + 1, 1, &drive->max_failures, NULL); } #else static inline void idedisk_add_settings(ide_drive_t *drive) { ; } #endif -static void idedisk_setup (ide_drive_t *drive) +static void idedisk_setup(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct hd_driveid *id = drive->id; @@ -792,11 +805,10 @@ static void idedisk_setup (ide_drive_t *drive) if (drive->removable) { /* - * Removable disks (eg. SYQUEST); ignore 'WD' drives + * Removable disks (eg. SYQUEST); ignore 'WD' drives */ - if (id->model[0] != 'W' || id->model[1] != 'D') { + if (id->model[0] != 'W' || id->model[1] != 'D') drive->doorlocking = 1; - } } (void)set_lba_addressing(drive, 1); @@ -810,10 +822,11 @@ static void idedisk_setup (ide_drive_t *drive) blk_queue_max_sectors(drive->queue, max_s); } - printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2); + printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, + drive->queue->max_sectors / 2); /* calculate drive capacity, and select LBA if possible */ - init_idedisk_capacity (drive); + init_idedisk_capacity(drive); /* limit drive capacity to 137GB if LBA48 cannot be used */ if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { @@ -826,9 +839,9 @@ static void idedisk_setup (ide_drive_t *drive) if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && drive->addressing) { if (drive->capacity64 > 1ULL << 28) { - printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will" - " be used for accessing sectors > %u\n", - drive->name, 1 << 28); + printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode" + " will be used for accessing sectors " + "> %u\n", drive->name, 1 << 28); } else drive->addressing = 0; } @@ -837,7 +850,8 @@ static void idedisk_setup (ide_drive_t *drive) * if possible, give fdisk access to more of the drive, * by correcting bios_cyls: */ - capacity = idedisk_capacity (drive); + capacity = idedisk_capacity(drive); + if (!drive->forced_geom) { if (idedisk_supports_lba48(drive->id)) { @@ -993,7 +1007,8 @@ static int idedisk_open(struct inode *inode, struct file *filp) struct ide_disk_obj *idkp; ide_drive_t *drive; - if (!(idkp = ide_disk_get(disk))) + idkp = ide_disk_get(disk); + if (idkp == NULL) return -ENXIO; drive = idkp->drive; @@ -1115,13 +1130,13 @@ static int idedisk_revalidate_disk(struct gendisk *disk) } static struct block_device_operations idedisk_ops = { - .owner = THIS_MODULE, - .open = idedisk_open, - .release = idedisk_release, - .ioctl = idedisk_ioctl, - .getgeo = idedisk_getgeo, - .media_changed = idedisk_media_changed, - .revalidate_disk= idedisk_revalidate_disk + .owner = THIS_MODULE, + .open = idedisk_open, + .release = idedisk_release, + .ioctl = idedisk_ioctl, + .getgeo = idedisk_getgeo, + .media_changed = idedisk_media_changed, + .revalidate_disk = idedisk_revalidate_disk }; MODULE_DESCRIPTION("ATA DISK Driver"); @@ -1184,7 +1199,7 @@ failed: return -ENODEV; } -static void __exit idedisk_exit (void) +static void __exit idedisk_exit(void) { driver_unregister(&idedisk_driver.gen_driver); } diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index d61e5788d31..8757e5ef6c9 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -703,17 +703,8 @@ static int ide_tune_dma(ide_drive_t *drive) speed = ide_max_dma_mode(drive); - if (!speed) { - /* is this really correct/needed? */ - if ((hwif->host_flags & IDE_HFLAG_CY82C693) && - ide_dma_good_drive(drive)) - return 1; - else - return 0; - } - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 1; + if (!speed) + return 0; if (ide_set_dma_mode(drive, speed)) return 0; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 5f133dfb541..ed19a8bbd2d 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -396,7 +396,7 @@ static void idefloppy_retry_pc(ide_drive_t *drive) } /* The usual interrupt handler called during a packet command. */ -static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) +static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; @@ -1596,13 +1596,13 @@ static int idefloppy_revalidate_disk(struct gendisk *disk) } static struct block_device_operations idefloppy_ops = { - .owner = THIS_MODULE, - .open = idefloppy_open, - .release = idefloppy_release, - .ioctl = idefloppy_ioctl, - .getgeo = idefloppy_getgeo, - .media_changed = idefloppy_media_changed, - .revalidate_disk= idefloppy_revalidate_disk + .owner = THIS_MODULE, + .open = idefloppy_open, + .release = idefloppy_release, + .ioctl = idefloppy_ioctl, + .getgeo = idefloppy_getgeo, + .media_changed = idefloppy_media_changed, + .revalidate_disk = idefloppy_revalidate_disk }; static int ide_floppy_probe(ide_drive_t *drive) diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 25fda0a3263..19f63e393d1 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -33,7 +33,7 @@ static ssize_t store_add(struct class *cls, const char *buf, size_t n) if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3) return -EINVAL; - hwif = ide_find_port(base); + hwif = ide_find_port(); if (hwif == NULL) return -ENOENT; @@ -90,11 +90,21 @@ static int __init ide_generic_init(void) int i; for (i = 0; i < MAX_HWIFS; i++) { - ide_hwif_t *hwif = &ide_hwifs[i]; + ide_hwif_t *hwif; unsigned long io_addr = ide_default_io_base(i); hw_regs_t hw; - if (hwif->chipset == ide_unknown && io_addr) { + if (io_addr) { + /* + * Skip probing if the corresponding + * slot is already occupied. + */ + hwif = ide_find_port(); + if (hwif == NULL || hwif->index != i) { + idx[i] = 0xff; + continue; + } + memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io_addr, io_addr + 0x206); hw.irq = ide_default_irq(io_addr); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 31e5afadb7e..51d181ee9cf 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -726,10 +726,6 @@ static ide_startstop_t do_special (ide_drive_t *drive) s->b.set_tune = 0; if (set_pio_mode_abuse(drive->hwif, req_pio)) { - - if (hwif->set_pio_mode == NULL) - return ide_stopped; - /* * take ide_lock for drive->[no_]unmask/[no_]io_32bit */ diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 7031a8dcf69..c859de77aa8 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -274,16 +274,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode) if (overridden) printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", drive->name); - - /* - * Conservative "downgrade" for all pre-ATA2 drives - */ - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 && - pio_mode && pio_mode < 4) { - pio_mode--; - printk(KERN_INFO "%s: applying conservative " - "PIO \"downgrade\"\n", drive->name); - } } if (pio_mode > max_mode) @@ -300,7 +290,8 @@ void ide_set_pio(ide_drive_t *drive, u8 req_pio) ide_hwif_t *hwif = drive->hwif; u8 host_pio, pio; - if (hwif->set_pio_mode == NULL) + if (hwif->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return; BUG_ON(hwif->pio_mask == 0x00); @@ -353,6 +344,9 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = drive->hwif; + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + if (hwif->set_pio_mode == NULL) return -1; @@ -380,6 +374,9 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = drive->hwif; + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + if (hwif->set_dma_mode == NULL) return -1; @@ -410,7 +407,8 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { ide_hwif_t *hwif = drive->hwif; - if (hwif->set_dma_mode == NULL) + if (hwif->set_dma_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return -1; rate = ide_rate_filter(drive, rate); diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 34c2ad36ce5..8a178a55a02 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -11,7 +11,7 @@ * * You should have received a copy of the GNU General Public License * (for example /usr/src/linux/COPYING); if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/init.h> @@ -20,12 +20,12 @@ /* Add your devices here :)) */ static struct pnp_device_id idepnp_devices[] = { - /* Generic ESDI/IDE/ATA compatible hard disk controller */ + /* Generic ESDI/IDE/ATA compatible hard disk controller */ {.id = "PNP0600", .driver_data = 0}, {.id = ""} }; -static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id) +static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { hw_regs_t hw; ide_hwif_t *hwif; @@ -38,7 +38,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id pnp_port_start(dev, 1)); hw.irq = pnp_irq(dev, 0); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; @@ -47,7 +47,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id ide_init_port_hw(hwif, &hw); printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); - pnp_set_drvdata(dev,hwif); + pnp_set_drvdata(dev, hwif); ide_device_add(idx, NULL); @@ -57,7 +57,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id return -1; } -static void idepnp_remove(struct pnp_dev * dev) +static void idepnp_remove(struct pnp_dev *dev) { ide_hwif_t *hwif = pnp_get_drvdata(dev); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 6a196c27b0a..87542972802 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1444,6 +1444,54 @@ static int ide_sysfs_register_port(ide_hwif_t *hwif) return rc; } +/** + * ide_find_port_slot - find free ide_hwifs[] slot + * @d: IDE port info + * + * Return the new hwif. If we are out of free slots return NULL. + */ + +ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d) +{ + ide_hwif_t *hwif; + int i; + u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1; + + /* + * Claim an unassigned slot. + * + * Give preference to claiming other slots before claiming ide0/ide1, + * just in case there's another interface yet-to-be-scanned + * which uses ports 0x1f0/0x170 (the ide0/ide1 defaults). + * + * Unless there is a bootable card that does not use the standard + * ports 0x1f0/0x170 (the ide0/ide1 defaults). + */ + if (bootable) { + i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0; + + for (; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown) + return hwif; + } + } else { + for (i = 2; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown) + return hwif; + } + for (i = 0; i < 2 && i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown) + return hwif; + } + } + + return NULL; +} +EXPORT_SYMBOL_GPL(ide_find_port_slot); + int ide_device_add_all(u8 *idx, const struct ide_port_info *d) { ide_hwif_t *hwif, *mate = NULL; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index edd7f186dc4..5d3562b4503 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -47,28 +47,28 @@ static int proc_ide_read_imodel const char *name; switch (hwif->chipset) { - case ide_generic: name = "generic"; break; - case ide_pci: name = "pci"; break; - case ide_cmd640: name = "cmd640"; break; - case ide_dtc2278: name = "dtc2278"; break; - case ide_ali14xx: name = "ali14xx"; break; - case ide_qd65xx: name = "qd65xx"; break; - case ide_umc8672: name = "umc8672"; break; - case ide_ht6560b: name = "ht6560b"; break; - case ide_rz1000: name = "rz1000"; break; - case ide_trm290: name = "trm290"; break; - case ide_cmd646: name = "cmd646"; break; - case ide_cy82c693: name = "cy82c693"; break; - case ide_4drives: name = "4drives"; break; - case ide_pmac: name = "mac-io"; break; - case ide_au1xxx: name = "au1xxx"; break; - case ide_palm3710: name = "palm3710"; break; - case ide_etrax100: name = "etrax100"; break; - case ide_acorn: name = "acorn"; break; - default: name = "(unknown)"; break; + case ide_generic: name = "generic"; break; + case ide_pci: name = "pci"; break; + case ide_cmd640: name = "cmd640"; break; + case ide_dtc2278: name = "dtc2278"; break; + case ide_ali14xx: name = "ali14xx"; break; + case ide_qd65xx: name = "qd65xx"; break; + case ide_umc8672: name = "umc8672"; break; + case ide_ht6560b: name = "ht6560b"; break; + case ide_rz1000: name = "rz1000"; break; + case ide_trm290: name = "trm290"; break; + case ide_cmd646: name = "cmd646"; break; + case ide_cy82c693: name = "cy82c693"; break; + case ide_4drives: name = "4drives"; break; + case ide_pmac: name = "mac-io"; break; + case ide_au1xxx: name = "au1xxx"; break; + case ide_palm3710: name = "palm3710"; break; + case ide_etrax100: name = "etrax100"; break; + case ide_acorn: name = "acorn"; break; + default: name = "(unknown)"; break; } len = sprintf(page, "%s\n", name); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_mate @@ -81,7 +81,7 @@ static int proc_ide_read_mate len = sprintf(page, "%s\n", hwif->mate->name); else len = sprintf(page, "(none)\n"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_channel @@ -93,7 +93,7 @@ static int proc_ide_read_channel page[0] = hwif->channel ? '1' : '0'; page[1] = '\n'; len = 2; - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_identify @@ -120,7 +120,7 @@ static int proc_ide_read_identify len = out - page; } } - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } /** @@ -197,7 +197,7 @@ EXPORT_SYMBOL(ide_add_setting); * The caller must hold the setting semaphore. */ -static void __ide_remove_setting (ide_drive_t *drive, char *name) +static void __ide_remove_setting(ide_drive_t *drive, char *name) { ide_settings_t **p, *setting; @@ -205,7 +205,8 @@ static void __ide_remove_setting (ide_drive_t *drive, char *name) while ((*p) && strcmp((*p)->name, name)) p = &((*p)->next); - if ((setting = (*p)) == NULL) + setting = (*p); + if (setting == NULL) return; (*p) = setting->next; @@ -223,7 +224,7 @@ static void __ide_remove_setting (ide_drive_t *drive, char *name) * caller must hold ide_setting_mtx. */ -static void auto_remove_settings (ide_drive_t *drive) +static void auto_remove_settings(ide_drive_t *drive) { ide_settings_t *setting; repeat: @@ -279,16 +280,16 @@ static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting) if ((setting->rw & SETTING_READ)) { spin_lock_irqsave(&ide_lock, flags); - switch(setting->data_type) { - case TYPE_BYTE: - val = *((u8 *) setting->data); - break; - case TYPE_SHORT: - val = *((u16 *) setting->data); - break; - case TYPE_INT: - val = *((u32 *) setting->data); - break; + switch (setting->data_type) { + case TYPE_BYTE: + val = *((u8 *) setting->data); + break; + case TYPE_SHORT: + val = *((u16 *) setting->data); + break; + case TYPE_INT: + val = *((u32 *) setting->data); + break; } spin_unlock_irqrestore(&ide_lock, flags); } @@ -326,15 +327,15 @@ static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int va if (ide_spin_wait_hwgroup(drive)) return -EBUSY; switch (setting->data_type) { - case TYPE_BYTE: - *((u8 *) setting->data) = val; - break; - case TYPE_SHORT: - *((u16 *) setting->data) = val; - break; - case TYPE_INT: - *((u32 *) setting->data) = val; - break; + case TYPE_BYTE: + *((u8 *) setting->data) = val; + break; + case TYPE_SHORT: + *((u16 *) setting->data) = val; + break; + case TYPE_INT: + *((u32 *) setting->data) = val; + break; } spin_unlock_irq(&ide_lock); return 0; @@ -390,7 +391,7 @@ void ide_add_generic_settings (ide_drive_t *drive) static void proc_ide_settings_warn(void) { - static int warned = 0; + static int warned; if (warned) return; @@ -413,11 +414,12 @@ static int proc_ide_read_settings mutex_lock(&ide_setting_mtx); out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); - while(setting) { + while (setting) { mul_factor = setting->mul_factor; div_factor = setting->div_factor; out += sprintf(out, "%-24s", setting->name); - if ((rc = ide_read_setting(drive, setting)) >= 0) + rc = ide_read_setting(drive, setting); + if (rc >= 0) out += sprintf(out, "%-16d", rc * mul_factor / div_factor); else out += sprintf(out, "%-16s", "write-only"); @@ -431,7 +433,7 @@ static int proc_ide_read_settings } len = out - page; mutex_unlock(&ide_setting_mtx); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } #define MAX_LEN 30 @@ -512,8 +514,7 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer, mutex_lock(&ide_setting_mtx); setting = ide_find_setting_by_name(drive, name); - if (!setting) - { + if (!setting) { mutex_unlock(&ide_setting_mtx); goto parse_error; } @@ -533,8 +534,8 @@ parse_error: int proc_ide_read_capacity (char *page, char **start, off_t off, int count, int *eof, void *data) { - int len = sprintf(page,"%llu\n", (long long)0x7fffffff); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + int len = sprintf(page, "%llu\n", (long long)0x7fffffff); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } EXPORT_SYMBOL_GPL(proc_ide_read_capacity); @@ -546,13 +547,13 @@ int proc_ide_read_geometry char *out = page; int len; - out += sprintf(out,"physical %d/%d/%d\n", + out += sprintf(out, "physical %d/%d/%d\n", drive->cyl, drive->head, drive->sect); - out += sprintf(out,"logical %d/%d/%d\n", + out += sprintf(out, "logical %d/%d/%d\n", drive->bios_cyl, drive->bios_head, drive->bios_sect); len = out - page; - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } EXPORT_SYMBOL(proc_ide_read_geometry); @@ -566,7 +567,7 @@ static int proc_ide_read_dmodel len = sprintf(page, "%.40s\n", (id && id->model[0]) ? (char *)id->model : "(none)"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_driver @@ -583,7 +584,7 @@ static int proc_ide_read_driver dev->driver->name, ide_drv->version); } else len = sprintf(page, "ide-default version 0.9.newide\n"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) @@ -639,30 +640,26 @@ static int proc_ide_read_media int len; switch (drive->media) { - case ide_disk: media = "disk\n"; - break; - case ide_cdrom: media = "cdrom\n"; - break; - case ide_tape: media = "tape\n"; - break; - case ide_floppy:media = "floppy\n"; - break; - case ide_optical:media = "optical\n"; - break; - default: media = "UNKNOWN\n"; - break; + case ide_disk: media = "disk\n"; break; + case ide_cdrom: media = "cdrom\n"; break; + case ide_tape: media = "tape\n"; break; + case ide_floppy: media = "floppy\n"; break; + case ide_optical: media = "optical\n"; break; + default: media = "UNKNOWN\n"; break; } - strcpy(page,media); + strcpy(page, media); len = strlen(media); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static ide_proc_entry_t generic_drive_entries[] = { - { "driver", S_IFREG|S_IRUGO, proc_ide_read_driver, proc_ide_write_driver }, - { "identify", S_IFREG|S_IRUSR, proc_ide_read_identify, NULL }, - { "media", S_IFREG|S_IRUGO, proc_ide_read_media, NULL }, - { "model", S_IFREG|S_IRUGO, proc_ide_read_dmodel, NULL }, - { "settings", S_IFREG|S_IRUSR|S_IWUSR,proc_ide_read_settings, proc_ide_write_settings }, + { "driver", S_IFREG|S_IRUGO, proc_ide_read_driver, + proc_ide_write_driver }, + { "identify", S_IFREG|S_IRUSR, proc_ide_read_identify, NULL }, + { "media", S_IFREG|S_IRUGO, proc_ide_read_media, NULL }, + { "model", S_IFREG|S_IRUGO, proc_ide_read_dmodel, NULL }, + { "settings", S_IFREG|S_IRUSR|S_IWUSR, proc_ide_read_settings, + proc_ide_write_settings }, { NULL, 0, NULL, NULL } }; @@ -734,7 +731,6 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) spin_unlock_irqrestore(&ide_lock, flags); mutex_unlock(&ide_setting_mtx); } - EXPORT_SYMBOL(ide_proc_unregister_driver); void ide_proc_port_register_devices(ide_hwif_t *hwif) @@ -755,7 +751,7 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif) drive->proc = proc_mkdir(drive->name, parent); if (drive->proc) ide_add_proc_entries(drive->proc, generic_drive_entries, drive); - sprintf(name,"ide%d/%s", (drive->name[2]-'a')/2, drive->name); + sprintf(name, "ide%d/%s", (drive->name[2]-'a')/2, drive->name); ent = proc_symlink(drive->name, proc_ide_root, name); if (!ent) return; } @@ -795,7 +791,6 @@ void ide_pci_create_host_proc(const char *name, get_info_t *get_info) { create_proc_info_entry(name, 0, proc_ide_root, get_info); } - EXPORT_SYMBOL_GPL(ide_pci_create_host_proc); #endif diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 917c72dcd33..d868ca44d03 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -100,13 +100,8 @@ int ide_noacpitfs = 1; int ide_noacpionboot = 1; #endif -/* - * This is declared extern in ide.h, for access by other IDE modules: - */ ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ -EXPORT_SYMBOL(ide_hwifs); - static void ide_port_init_devices_data(ide_hwif_t *); /* @@ -232,30 +227,6 @@ static int ide_system_bus_speed(void) return pci_dev_present(pci_default) ? 33 : 50; } -ide_hwif_t * ide_find_port(unsigned long base) -{ - ide_hwif_t *hwif; - int i; - - for (i = 0; i < MAX_HWIFS; i++) { - hwif = &ide_hwifs[i]; - if (hwif->io_ports[IDE_DATA_OFFSET] == base) - goto found; - } - - for (i = 0; i < MAX_HWIFS; i++) { - hwif = &ide_hwifs[i]; - if (hwif->chipset == ide_unknown) - goto found; - } - - hwif = NULL; -found: - return hwif; -} - -EXPORT_SYMBOL_GPL(ide_find_port); - static struct resource* hwif_request_region(ide_hwif_t *hwif, unsigned long addr, int num) { @@ -280,29 +251,21 @@ static struct resource* hwif_request_region(ide_hwif_t *hwif, int ide_hwif_request_regions(ide_hwif_t *hwif) { unsigned long addr; - unsigned int i; if (hwif->mmio) return 0; + addr = hwif->io_ports[IDE_CONTROL_OFFSET]; + if (addr && !hwif_request_region(hwif, addr, 1)) goto control_region_busy; - hwif->straight8 = 0; + addr = hwif->io_ports[IDE_DATA_OFFSET]; - if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) { - if (!hwif_request_region(hwif, addr, 8)) - goto data_region_busy; - hwif->straight8 = 1; - return 0; - } - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - addr = hwif->io_ports[i]; - if (!hwif_request_region(hwif, addr, 1)) { - while (--i) - release_region(addr, 1); - goto data_region_busy; - } - } + BUG_ON((addr | 7) != hwif->io_ports[IDE_STATUS_OFFSET]); + + if (!hwif_request_region(hwif, addr, 8)) + goto data_region_busy; + return 0; data_region_busy: @@ -328,19 +291,13 @@ control_region_busy: void ide_hwif_release_regions(ide_hwif_t *hwif) { - u32 i = 0; - if (hwif->mmio) return; + if (hwif->io_ports[IDE_CONTROL_OFFSET]) release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1); - if (hwif->straight8) { - release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); - return; - } - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) - if (hwif->io_ports[i]) - release_region(hwif->io_ports[i], 1); + + release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); } void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) @@ -627,11 +584,13 @@ out: int set_pio_mode(ide_drive_t *drive, int arg) { struct request rq; + ide_hwif_t *hwif = drive->hwif; if (arg < 0 || arg > 255) return -EINVAL; - if (drive->hwif->set_pio_mode == NULL) + if (hwif->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return -ENOSYS; if (drive->special.b.set_tune) diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index bc8b1f8de61..33bb7b87be5 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -86,7 +86,7 @@ static u8 regOff; /* output to base port to close registers */ /* * Read a controller register. */ -static inline u8 inReg (u8 reg) +static inline u8 inReg(u8 reg) { outb_p(reg, regPort); return inb(dataPort); @@ -95,7 +95,7 @@ static inline u8 inReg (u8 reg) /* * Write a controller register. */ -static void outReg (u8 data, u8 reg) +static void outReg(u8 data, u8 reg) { outb_p(reg, regPort); outb_p(data, dataPort); @@ -143,7 +143,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) /* * Auto-detect the IDE controller port. */ -static int __init findPort (void) +static int __init findPort(void) { int i; u8 t; @@ -175,7 +175,8 @@ static int __init findPort (void) /* * Initialize controller registers with default values. */ -static int __init initRegisters (void) { +static int __init initRegisters(void) +{ const RegInitializer *p; u8 t; unsigned long flags; @@ -199,7 +200,8 @@ static const struct ide_port_info ali14xx_port_info = { static int __init ali14xx_probe(void) { - static u8 idx[4] = { 0, 1, 0xff, 0xff }; + ide_hwif_t *hwif, *mate; + static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n", @@ -219,18 +221,26 @@ static int __init ali14xx_probe(void) ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; - ide_init_port_hw(&ide_hwifs[0], &hw[0]); - ide_init_port_hw(&ide_hwifs[1], &hw[1]); + hwif = ide_find_port(); + if (hwif) { + ide_init_port_hw(hwif, &hw[0]); + hwif->set_pio_mode = &ali14xx_set_pio_mode; + idx[0] = hwif->index; + } - ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode; - ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode; + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw[1]); + mate->set_pio_mode = &ali14xx_set_pio_mode; + idx[1] = mate->index; + } ide_device_add(idx, &ali14xx_port_info); return 0; } -int probe_ali14xx = 0; +int probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index fdd3791e465..6956eb8f2d5 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -221,7 +221,7 @@ fail_base2: buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 5f69cd2ea6f..9c6b3249a00 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -102,15 +102,9 @@ static int __init dtc2278_probe(void) { unsigned long flags; ide_hwif_t *hwif, *mate; - static u8 idx[4] = { 0, 1, 0xff, 0xff }; + static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - if (hwif->chipset != ide_unknown || mate->chipset != ide_unknown) - return 1; - local_irq_save(flags); /* * This enables the second interface @@ -137,10 +131,18 @@ static int __init dtc2278_probe(void) ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; - ide_init_port_hw(hwif, &hw[0]); - ide_init_port_hw(mate, &hw[1]); + hwif = ide_find_port(); + if (hwif) { + ide_init_port_hw(hwif, &hw[0]); + hwif->set_pio_mode = dtc2278_set_pio_mode; + idx[0] = hwif->index; + } - hwif->set_pio_mode = &dtc2278_set_pio_mode; + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw[1]); + idx[1] = mate->index; + } ide_device_add(idx, &dtc2278_port_info); diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index e950afa5939..8c9c9f7f54c 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -22,6 +22,7 @@ #include <asm/atariints.h> #include <asm/atari_stdma.h> +#define DRV_NAME "falconide" /* * Base of the IDE interface @@ -74,15 +75,21 @@ static int __init falconide_init(void) printk(KERN_INFO "ide: Falcon IDE controller\n"); + if (!request_mem_region(ATA_HD_BASE, 0x40, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + falconide_setup_ports(&hw); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); + hwif->mmio = 1; ide_get_lock(NULL, NULL); ide_device_add(idx, NULL); diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index e3b4638cc88..fcc8d52bf2a 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -175,7 +175,7 @@ found: gayle_setup_ports(&hw, base, ctrlport, irqport, ack_intr); - hwif = ide_find_port(base); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c index 0b0d8673192..abdedf56643 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/ide/legacy/hd.c @@ -122,12 +122,12 @@ static int hd_error; * This struct defines the HD's and their types. */ struct hd_i_struct { - unsigned int head,sect,cyl,wpcom,lzone,ctl; + unsigned int head, sect, cyl, wpcom, lzone, ctl; int unit; int recalibrate; int special_op; }; - + #ifdef HD_TYPE static struct hd_i_struct hd_info[] = { HD_TYPE }; static int NR_HD = ARRAY_SIZE(hd_info); @@ -168,7 +168,7 @@ unsigned long read_timer(void) spin_lock_irqsave(&i8253_lock, flags); t = jiffies * 11932; - outb_p(0, 0x43); + outb_p(0, 0x43); i = inb_p(0x40); i |= inb(0x40) << 8; spin_unlock_irqrestore(&i8253_lock, flags); @@ -183,7 +183,7 @@ static void __init hd_setup(char *str, int *ints) if (ints[0] != 3) return; if (hd_info[0].head != 0) - hdind=1; + hdind = 1; hd_info[hdind].head = ints[2]; hd_info[hdind].sect = ints[3]; hd_info[hdind].cyl = ints[1]; @@ -193,7 +193,7 @@ static void __init hd_setup(char *str, int *ints) NR_HD = hdind+1; } -static void dump_status (const char *msg, unsigned int stat) +static void dump_status(const char *msg, unsigned int stat) { char *name = "hd?"; if (CURRENT) @@ -291,7 +291,6 @@ static int controller_ready(unsigned int drive, unsigned int head) return 0; } - static void hd_out(struct hd_i_struct *disk, unsigned int nsect, unsigned int sect, @@ -313,15 +312,15 @@ static void hd_out(struct hd_i_struct *disk, return; } SET_HANDLER(intr_addr); - outb_p(disk->ctl,HD_CMD); - port=HD_DATA; - outb_p(disk->wpcom>>2,++port); - outb_p(nsect,++port); - outb_p(sect,++port); - outb_p(cyl,++port); - outb_p(cyl>>8,++port); - outb_p(0xA0|(disk->unit<<4)|head,++port); - outb_p(cmd,++port); + outb_p(disk->ctl, HD_CMD); + port = HD_DATA; + outb_p(disk->wpcom >> 2, ++port); + outb_p(nsect, ++port); + outb_p(sect, ++port); + outb_p(cyl, ++port); + outb_p(cyl >> 8, ++port); + outb_p(0xA0 | (disk->unit << 4) | head, ++port); + outb_p(cmd, ++port); } static void hd_request (void); @@ -344,14 +343,14 @@ static void reset_controller(void) { int i; - outb_p(4,HD_CMD); - for(i = 0; i < 1000; i++) barrier(); - outb_p(hd_info[0].ctl & 0x0f,HD_CMD); - for(i = 0; i < 1000; i++) barrier(); + outb_p(4, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + outb_p(hd_info[0].ctl & 0x0f, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); if (drive_busy()) printk("hd: controller still busy\n"); else if ((hd_error = inb(HD_ERROR)) != 1) - printk("hd: controller reset failed: %02x\n",hd_error); + printk("hd: controller reset failed: %02x\n", hd_error); } static void reset_hd(void) @@ -371,8 +370,8 @@ repeat: if (++i < NR_HD) { struct hd_i_struct *disk = &hd_info[i]; disk->special_op = disk->recalibrate = 1; - hd_out(disk,disk->sect,disk->sect,disk->head-1, - disk->cyl,WIN_SPECIFY,&reset_hd); + hd_out(disk, disk->sect, disk->sect, disk->head-1, + disk->cyl, WIN_SPECIFY, &reset_hd); if (reset) goto repeat; } else @@ -393,7 +392,7 @@ static void unexpected_hd_interrupt(void) unsigned int stat = inb_p(HD_STATUS); if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) { - dump_status ("unexpected interrupt", stat); + dump_status("unexpected interrupt", stat); SET_TIMER; } } @@ -453,7 +452,7 @@ static void read_intr(void) return; ok_to_read: req = CURRENT; - insw(HD_DATA,req->buffer,256); + insw(HD_DATA, req->buffer, 256); req->sector++; req->buffer += 512; req->errors = 0; @@ -507,7 +506,7 @@ ok_to_write: end_request(req, 1); if (i > 0) { SET_HANDLER(&write_intr); - outsw(HD_DATA,req->buffer,256); + outsw(HD_DATA, req->buffer, 256); local_irq_enable(); } else { #if (HD_DELAY > 0) @@ -560,11 +559,11 @@ static int do_special_op(struct hd_i_struct *disk, struct request *req) { if (disk->recalibrate) { disk->recalibrate = 0; - hd_out(disk,disk->sect,0,0,0,WIN_RESTORE,&recal_intr); + hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr); return reset; } if (disk->head > 16) { - printk ("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); + printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); end_request(req, 0); } disk->special_op = 0; @@ -633,19 +632,21 @@ repeat: if (blk_fs_request(req)) { switch (rq_data_dir(req)) { case READ: - hd_out(disk,nsect,sec,head,cyl,WIN_READ,&read_intr); + hd_out(disk, nsect, sec, head, cyl, WIN_READ, + &read_intr); if (reset) goto repeat; break; case WRITE: - hd_out(disk,nsect,sec,head,cyl,WIN_WRITE,&write_intr); + hd_out(disk, nsect, sec, head, cyl, WIN_WRITE, + &write_intr); if (reset) goto repeat; if (wait_DRQ()) { bad_rw_intr(); goto repeat; } - outsw(HD_DATA,req->buffer,256); + outsw(HD_DATA, req->buffer, 256); break; default: printk("unknown hd-command\n"); @@ -655,7 +656,7 @@ repeat: } } -static void do_hd_request (struct request_queue * q) +static void do_hd_request(struct request_queue *q) { disable_irq(HD_IRQ); hd_request(); @@ -708,12 +709,12 @@ static int __init hd_init(void) { int drive; - if (register_blkdev(MAJOR_NR,"hd")) + if (register_blkdev(MAJOR_NR, "hd")) return -1; hd_queue = blk_init_queue(do_hd_request, &hd_lock); if (!hd_queue) { - unregister_blkdev(MAJOR_NR,"hd"); + unregister_blkdev(MAJOR_NR, "hd"); return -ENOMEM; } @@ -742,7 +743,7 @@ static int __init hd_init(void) goto out; } - for (drive=0 ; drive < NR_HD ; drive++) { + for (drive = 0 ; drive < NR_HD ; drive++) { struct gendisk *disk = alloc_disk(64); struct hd_i_struct *p = &hd_info[drive]; if (!disk) @@ -756,7 +757,7 @@ static int __init hd_init(void) disk->queue = hd_queue; p->unit = drive; hd_gendisk[drive] = disk; - printk ("%s: %luMB, CHS=%d/%d/%d\n", + printk("%s: %luMB, CHS=%d/%d/%d\n", disk->disk_name, (unsigned long)get_capacity(disk)/2048, p->cyl, p->head, p->sect); } @@ -776,7 +777,7 @@ static int __init hd_init(void) } /* Let them fly */ - for(drive=0; drive < NR_HD; drive++) + for (drive = 0; drive < NR_HD; drive++) add_disk(hd_gendisk[drive]); return 0; @@ -791,7 +792,7 @@ out1: NR_HD = 0; out: del_timer(&device_timer); - unregister_blkdev(MAJOR_NR,"hd"); + unregister_blkdev(MAJOR_NR, "hd"); blk_cleanup_queue(hd_queue); return -1; Enomem: @@ -800,7 +801,8 @@ Enomem: goto out; } -static int __init parse_hd_setup (char *line) { +static int __init parse_hd_setup(char *line) +{ int ints[6]; (void) get_options(line, ARRAY_SIZE(ints), ints); diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 88fe9070c9c..60f52f5158c 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -35,6 +35,7 @@ * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ +#define DRV_NAME "ht6560b" #define HT6560B_VERSION "v0.08" #include <linux/module.h> @@ -339,16 +340,13 @@ static const struct ide_port_info ht6560b_port_info __initdata = { static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; - static u8 idx[4] = { 0, 1, 0xff, 0xff }; + static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; if (probe_ht6560b == 0) return -ENODEV; - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - if (!request_region(HT_CONFIG_PORT, 1, hwif->name)) { + if (!request_region(HT_CONFIG_PORT, 1, DRV_NAME)) { printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n", __FUNCTION__); return -ENODEV; @@ -367,17 +365,23 @@ static int __init ht6560b_init(void) ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; - ide_init_port_hw(hwif, &hw[0]); - ide_init_port_hw(mate, &hw[1]); - - hwif->selectproc = &ht6560b_selectproc; - hwif->set_pio_mode = &ht6560b_set_pio_mode; - - mate->selectproc = &ht6560b_selectproc; - mate->set_pio_mode = &ht6560b_set_pio_mode; + hwif = ide_find_port(); + if (hwif) { + ide_init_port_hw(hwif, &hw[0]); + hwif->selectproc = ht6560b_selectproc; + hwif->set_pio_mode = ht6560b_set_pio_mode; + hwif->port_init_devs = ht6560b_port_init_devs; + idx[0] = hwif->index; + } - hwif->port_init_devs = ht6560b_port_init_devs; - mate->port_init_devs = ht6560b_port_init_devs; + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw[1]); + mate->selectproc = ht6560b_selectproc; + mate->set_pio_mode = ht6560b_set_pio_mode; + mate->port_init_devs = ht6560b_port_init_devs; + idx[1] = mate->index; + } ide_device_add(idx, &ht6560b_port_info); diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index ecd7f355355..c352f12348a 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -4,7 +4,7 @@ #include <linux/module.h> #include <linux/ide.h> -int probe_4drives = 0; +int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); @@ -12,31 +12,37 @@ MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); static int __init ide_4drives_init(void) { ide_hwif_t *hwif, *mate; - u8 idx[4] = { 0, 1, 0xff, 0xff }; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw; if (probe_4drives == 0) return -ENODEV; - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, 0x1f0, 0x3f6); hw.irq = 14; hw.chipset = ide_4drives; - ide_init_port_hw(hwif, &hw); - ide_init_port_hw(mate, &hw); - - mate->drives[0].select.all ^= 0x20; - mate->drives[1].select.all ^= 0x20; - - hwif->mate = mate; - mate->mate = hwif; - - hwif->serialized = mate->serialized = 1; + hwif = ide_find_port(); + if (hwif) { + ide_init_port_hw(hwif, &hw); + idx[0] = hwif->index; + } + + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw); + mate->drives[0].select.all ^= 0x20; + mate->drives[1].select.all ^= 0x20; + idx[1] = mate->index; + + if (hwif) { + hwif->mate = mate; + mate->mate = hwif; + hwif->serialized = mate->serialized = 1; + } + } ide_device_add(idx, NULL); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 9a23b94f293..b97b8d51b3e 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -156,7 +156,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq hw.chipset = ide_pci; hw.dev = &handle->dev; - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) return -1; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 361b1bb544b..bf240775531 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -89,7 +89,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) res_alt->start, res_alt->end - res_alt->start + 1); } - hwif = ide_find_port((unsigned long)base); + hwif = ide_find_port(); if (!hwif) { ret = -ENODEV; goto out; @@ -100,11 +100,10 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) hw.dev = &pdev->dev; ide_init_port_hw(hwif, &hw); + hwif->mmio = 1; - if (mmio) { - hwif->mmio = 1; + if (mmio) default_hwif_mmiops(hwif); - } idx[0] = hwif->index; diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index eaf5dbe58bc..7429b80cb08 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -120,7 +120,7 @@ static int __init macide_init(void) macide_setup_ports(&hw, base, irq, ack_intr); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 2da28759686..fcbff0eced1 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -137,7 +137,7 @@ static int __init q40ide_init(void) // m68kide_iops, q40ide_default_irq(pcide_bases[i])); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 7016bdf4fcc..6e820c7c5c6 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -88,12 +88,12 @@ static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */ /* - * qd_select: + * qd65xx_select: * - * This routine is invoked from ide.c to prepare for access to a given drive. + * This routine is invoked to prepare for access to a given drive. */ -static void qd_select (ide_drive_t *drive) +static void qd65xx_select(ide_drive_t *drive) { u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) | (QD_TIMREG(drive) & 0x02); @@ -168,36 +168,15 @@ static int qd_find_disk_type (ide_drive_t *drive, } /* - * qd_timing_ok: - * - * check whether timings don't conflict - */ - -static int qd_timing_ok (ide_drive_t drives[]) -{ - return (IDE_IMPLY(drives[0].present && drives[1].present, - IDE_IMPLY(QD_TIMREG(drives) == QD_TIMREG(drives+1), - QD_TIMING(drives) == QD_TIMING(drives+1)))); - /* if same timing register, must be same timing */ -} - -/* * qd_set_timing: * - * records the timing, and enables selectproc as needed + * records the timing */ static void qd_set_timing (ide_drive_t *drive, u8 timing) { - ide_hwif_t *hwif = HWIF(drive); - drive->drive_data &= 0xff00; drive->drive_data |= timing; - if (qd_timing_ok(hwif->drives)) { - qd_select(drive); /* selects once */ - hwif->selectproc = NULL; - } else - hwif->selectproc = &qd_select; printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); } @@ -225,10 +204,11 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) { - int base = HWIF(drive)->select_data; + ide_hwif_t *hwif = drive->hwif; unsigned int cycle_time; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ + u8 base = (hwif->config_data & 0xff00) >> 8; if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) { cycle_time = ide_pio_cycle_time(drive, pio); @@ -299,21 +279,10 @@ static int __init qd_testreg(int port) return (readreg != QD_TESTVAL); } -/* - * qd_setup: - * - * called to setup an ata channel : adjusts attributes & links for tuning - */ - -static void __init qd_setup(ide_hwif_t *hwif, int base, int config) -{ - hwif->select_data = base; - hwif->config_data = config; -} - static void __init qd6500_port_init_devs(ide_hwif_t *hwif) { - u8 base = hwif->select_data, config = QD_CONFIG(hwif); + u8 base = (hwif->config_data & 0xff00) >> 8; + u8 config = QD_CONFIG(hwif); hwif->drives[0].drive_data = QD6500_DEF_DATA; hwif->drives[1].drive_data = QD6500_DEF_DATA; @@ -322,9 +291,10 @@ static void __init qd6500_port_init_devs(ide_hwif_t *hwif) static void __init qd6580_port_init_devs(ide_hwif_t *hwif) { u16 t1, t2; - u8 base = hwif->select_data, config = QD_CONFIG(hwif); + u8 base = (hwif->config_data & 0xff00) >> 8; + u8 config = QD_CONFIG(hwif); - if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) { + if (hwif->host_flags & IDE_HFLAG_SINGLE) { t1 = QD6580_DEF_DATA; t2 = QD6580_DEF_DATA2; } else @@ -355,14 +325,18 @@ static int __init qd_probe(int base) u8 config, unit; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; + struct ide_port_info d = qd65xx_port_info; config = inb(QD_CONFIG_PORT); if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) ) - return 1; + return -ENODEV; unit = ! (config & QD_CONFIG_IDE_BASEPORT); + if (unit) + d.host_flags |= IDE_HFLAG_QD_2ND_PORT; + memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); @@ -373,30 +347,37 @@ static int __init qd_probe(int base) if ((config & 0xf0) == QD_CONFIG_QD6500) { - if (qd_testreg(base)) return 1; /* bad register */ + if (qd_testreg(base)) + return -ENODEV; /* bad register */ /* qd6500 found */ - hwif = &ide_hwifs[unit]; - printk(KERN_NOTICE "%s: qd6500 at %#x\n", hwif->name, base); - printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", - config, QD_ID3); - if (config & QD_CONFIG_DISABLED) { printk(KERN_WARNING "qd6500 is disabled !\n"); - return 1; + return -ENODEV; } + printk(KERN_NOTICE "qd6500 at %#x\n", base); + printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", + config, QD_ID3); + + d.host_flags |= IDE_HFLAG_SINGLE; + + hwif = ide_find_port_slot(&d); + if (hwif == NULL) + return -ENOENT; + ide_init_port_hw(hwif, &hw[unit]); - qd_setup(hwif, base, config); + hwif->config_data = (base << 8) | config; hwif->port_init_devs = qd6500_port_init_devs; - hwif->set_pio_mode = &qd6500_set_pio_mode; + hwif->set_pio_mode = qd6500_set_pio_mode; + hwif->selectproc = qd65xx_select; - idx[unit] = unit; + idx[unit] = hwif->index; - ide_device_add(idx, &qd65xx_port_info); + ide_device_add(idx, &d); return 1; } @@ -406,8 +387,8 @@ static int __init qd_probe(int base) u8 control; - if (qd_testreg(base) || qd_testreg(base+0x02)) return 1; - /* bad registers */ + if (qd_testreg(base) || qd_testreg(base + 0x02)) + return -ENODEV; /* bad registers */ /* qd6580 found */ @@ -422,46 +403,52 @@ static int __init qd_probe(int base) if (control & QD_CONTR_SEC_DISABLED) { /* secondary disabled */ - hwif = &ide_hwifs[unit]; - printk(KERN_INFO "%s: qd6580: single IDE board\n", - hwif->name); + printk(KERN_INFO "qd6580: single IDE board\n"); + + d.host_flags |= IDE_HFLAG_SINGLE; + + hwif = ide_find_port_slot(&d); + if (hwif == NULL) + return -ENOENT; ide_init_port_hw(hwif, &hw[unit]); - qd_setup(hwif, base, config | (control << 8)); + hwif->config_data = (base << 8) | config; hwif->port_init_devs = qd6580_port_init_devs; - hwif->set_pio_mode = &qd6580_set_pio_mode; + hwif->set_pio_mode = qd6580_set_pio_mode; + hwif->selectproc = qd65xx_select; - idx[unit] = unit; + idx[unit] = hwif->index; - ide_device_add(idx, &qd65xx_port_info); + ide_device_add(idx, &d); return 1; } else { ide_hwif_t *mate; - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; /* secondary enabled */ - printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n", - hwif->name, mate->name); - - ide_init_port_hw(hwif, &hw[0]); - ide_init_port_hw(mate, &hw[1]); - - qd_setup(hwif, base, config | (control << 8)); - - hwif->port_init_devs = qd6580_port_init_devs; - hwif->set_pio_mode = &qd6580_set_pio_mode; - - qd_setup(mate, base, config | (control << 8)); - - mate->port_init_devs = qd6580_port_init_devs; - mate->set_pio_mode = &qd6580_set_pio_mode; - - idx[0] = 0; - idx[1] = 1; + printk(KERN_INFO "qd6580: dual IDE board\n"); + + hwif = ide_find_port(); + if (hwif) { + ide_init_port_hw(hwif, &hw[0]); + hwif->config_data = (base << 8) | config; + hwif->port_init_devs = qd6580_port_init_devs; + hwif->set_pio_mode = qd6580_set_pio_mode; + hwif->selectproc = qd65xx_select; + idx[0] = hwif->index; + } + + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw[1]); + mate->config_data = (base << 8) | config; + mate->port_init_devs = qd6580_port_init_devs; + mate->set_pio_mode = qd6580_set_pio_mode; + mate->selectproc = qd65xx_select; + idx[1] = mate->index; + } ide_device_add(idx, &qd65xx_port_info); @@ -469,7 +456,7 @@ static int __init qd_probe(int base) } } /* no qd65xx found */ - return 1; + return -ENODEV; } int probe_qd65xx = 0; @@ -479,14 +466,18 @@ MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); static int __init qd65xx_init(void) { + int rc1, rc2 = -ENODEV; + if (probe_qd65xx == 0) return -ENODEV; - if (qd_probe(0x30)) - qd_probe(0xb0); - if (ide_hwifs[0].chipset != ide_qd65xx && - ide_hwifs[1].chipset != ide_qd65xx) + rc1 = qd_probe(0x30); + if (rc1) + rc2 = qd_probe(0xb0); + + if (rc1 < 0 && rc2 < 0) return -ENODEV; + return 0; } diff --git a/drivers/ide/legacy/qd65xx.h b/drivers/ide/legacy/qd65xx.h index 28dd50a15d5..c83dea85e62 100644 --- a/drivers/ide/legacy/qd65xx.h +++ b/drivers/ide/legacy/qd65xx.h @@ -30,7 +30,6 @@ #define QD_ID3 ((config & QD_CONFIG_ID3)!=0) #define QD_CONFIG(hwif) ((hwif)->config_data & 0x00ff) -#define QD_CONTROL(hwif) (((hwif)->config_data & 0xff00) >> 8) #define QD_TIMING(drive) (byte)(((drive)->drive_data) & 0x00ff) #define QD_TIMREG(drive) (byte)((((drive)->drive_data) & 0xff00) >> 8) diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index bc1944811b9..4d90badd2bd 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -19,7 +19,7 @@ */ /* - * VLB Controller Support from + * VLB Controller Support from * Wolfram Podien * Rohoefe 3 * D28832 Achim @@ -32,7 +32,7 @@ * #define UMC_DRIVE0 11 * in the beginning of the driver, which sets the speed of drive 0 to 11 (there * are some lines present). 0 - 11 are allowed speed values. These values are - * the results from the DOS speed test program supplied from UMC. 11 is the + * the results from the DOS speed test program supplied from UMC. 11 is the * highest speed (about PIO mode 3) */ #define REALLY_SLOW_IO /* some systems can safely undef this */ @@ -60,62 +60,62 @@ #define UMC_DRIVE3 1 /* In case of crash reduce speed */ static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3}; -static const u8 pio_to_umc [5] = {0,3,7,10,11}; /* rough guesses */ +static const u8 pio_to_umc [5] = {0, 3, 7, 10, 11}; /* rough guesses */ /* 0 1 2 3 4 5 6 7 8 9 10 11 */ static const u8 speedtab [3][12] = { - {0xf, 0xb, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 }, - {0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 }, - {0xff,0xcb,0xc0,0x58,0x36,0x33,0x23,0x22,0x21,0x11,0x10,0x0}}; + {0x0f, 0x0b, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1}, + {0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1}, + {0xff, 0xcb, 0xc0, 0x58, 0x36, 0x33, 0x23, 0x22, 0x21, 0x11, 0x10, 0x0} +}; -static void out_umc (char port,char wert) +static void out_umc(char port, char wert) { - outb_p(port,0x108); - outb_p(wert,0x109); + outb_p(port, 0x108); + outb_p(wert, 0x109); } -static inline u8 in_umc (char port) +static inline u8 in_umc(char port) { - outb_p(port,0x108); + outb_p(port, 0x108); return inb_p(0x109); } -static void umc_set_speeds (u8 speeds[]) +static void umc_set_speeds(u8 speeds[]) { int i, tmp; - outb_p(0x5A,0x108); /* enable umc */ + outb_p(0x5A, 0x108); /* enable umc */ - out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4))); - out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4))); + out_umc(0xd7, (speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4))); + out_umc(0xd6, (speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4))); tmp = 0; - for (i = 3; i >= 0; i--) { + for (i = 3; i >= 0; i--) tmp = (tmp << 2) | speedtab[1][speeds[i]]; + out_umc(0xdc, tmp); + for (i = 0; i < 4; i++) { + out_umc(0xd0 + i, speedtab[2][speeds[i]]); + out_umc(0xd8 + i, speedtab[2][speeds[i]]); } - out_umc (0xdc,tmp); - for (i = 0;i < 4; i++) { - out_umc (0xd0+i,speedtab[2][speeds[i]]); - out_umc (0xd8+i,speedtab[2][speeds[i]]); - } - outb_p(0xa5,0x108); /* disable umc */ + outb_p(0xa5, 0x108); /* disable umc */ - printk ("umc8672: drive speeds [0 to 11]: %d %d %d %d\n", + printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n", speeds[0], speeds[1], speeds[2], speeds[3]); } static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) { + ide_hwif_t *hwif = drive->hwif; unsigned long flags; - ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup; printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]); spin_lock_irqsave(&ide_lock, flags); - if (hwgroup && hwgroup->handler != NULL) { + if (hwif->mate && hwif->mate->hwgroup->handler) { printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n"); } else { current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio]; - umc_set_speeds (current_speeds); + umc_set_speeds(current_speeds); } spin_unlock_irqrestore(&ide_lock, flags); } @@ -128,8 +128,9 @@ static const struct ide_port_info umc8672_port_info __initdata = { static int __init umc8672_probe(void) { + ide_hwif_t *hwif, *mate; unsigned long flags; - static u8 idx[4] = { 0, 1, 0xff, 0xff }; + static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; if (!request_region(0x108, 2, "umc8672")) { @@ -137,16 +138,16 @@ static int __init umc8672_probe(void) return 1; } local_irq_save(flags); - outb_p(0x5A,0x108); /* enable umc */ + outb_p(0x5A, 0x108); /* enable umc */ if (in_umc (0xd5) != 0xa0) { local_irq_restore(flags); printk(KERN_ERR "umc8672: not found\n"); release_region(0x108, 2); - return 1; + return 1; } - outb_p(0xa5,0x108); /* disable umc */ + outb_p(0xa5, 0x108); /* disable umc */ - umc_set_speeds (current_speeds); + umc_set_speeds(current_speeds); local_irq_restore(flags); memset(&hw, 0, sizeof(hw)); @@ -157,18 +158,26 @@ static int __init umc8672_probe(void) ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; - ide_init_port_hw(&ide_hwifs[0], &hw[0]); - ide_init_port_hw(&ide_hwifs[1], &hw[1]); + hwif = ide_find_port(); + if (hwif) { + ide_init_port_hw(hwif, &hw[0]); + hwif->set_pio_mode = umc_set_pio_mode; + idx[0] = hwif->index; + } - ide_hwifs[0].set_pio_mode = &umc_set_pio_mode; - ide_hwifs[1].set_pio_mode = &umc_set_pio_mode; + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw[1]); + mate->set_pio_mode = umc_set_pio_mode; + idx[1] = mate->index; + } ide_device_add(idx, &umc8672_port_info); return 0; } -int probe_umc8672 = 0; +int probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 9b628248f2f..a8cd0035936 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -599,9 +599,11 @@ static int au_ide_probe(struct device *dev) goto out; } - /* FIXME: This might possibly break PCMCIA IDE devices */ - - hwif = &ide_hwifs[pdev->id]; + hwif = ide_find_port(); + if (hwif == NULL) { + ret = -ENOENT; + goto out; + } memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 956259fc09b..bbe8d585334 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -76,17 +76,12 @@ static int __devinit swarm_ide_probe(struct device *dev) if (!SIBYTE_HAVE_IDE) return -ENODEV; - /* Find an empty slot. */ - for (i = 0; i < MAX_HWIFS; i++) - if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET]) - break; - if (i >= MAX_HWIFS) { + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); return -ENOMEM; } - hwif = ide_hwifs + i; - base = ioremap(A_IO_EXT_BASE, 0x800); offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index cfb3265bc1a..c9ba15afe97 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -220,7 +220,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_ABUSE_SET_DMA_MODE, + IDE_HFLAG_ABUSE_SET_DMA_MODE | + IDE_HFLAG_NON_BOOTABLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index b3b6f514ce2..3fa2d9f7b1b 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -750,7 +750,6 @@ static const struct ide_port_info ali15x3_chipset __devinitdata = { .init_chipset = init_chipset_ali15x3, .init_hwif = init_hwif_ali15x3, .init_dma = init_dma_ali15x3, - .host_flags = IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO5, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 2ef890ce809..ff684d31237 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -219,12 +219,10 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) #define IDE_HFLAGS_AMD \ (IDE_HFLAG_PIO_NO_BLACKLIST | \ - IDE_HFLAG_PIO_NO_DOWNGRADE | \ IDE_HFLAG_ABUSE_SET_DMA_MODE | \ IDE_HFLAG_POST_SET_MODE | \ IDE_HFLAG_IO_32BIT | \ - IDE_HFLAG_UNMASK_IRQS | \ - IDE_HFLAG_BOOTABLE) + IDE_HFLAG_UNMASK_IRQS) #define DECLARE_AMD_DEV(name_str, swdma, udma) \ { \ diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 7e037c880cb..91722f88b7b 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -151,7 +151,7 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = { .name = "ATIIXP", .init_hwif = init_hwif_atiixp, .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -159,8 +159,7 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = { .name = "SB600_PATA", .init_hwif = init_hwif_atiixp, .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS | - IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index a1cfe033a55..b076dbfc43a 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -4,7 +4,7 @@ /* * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov) - * mlord@pobox.com (Mark Lord) + * mlord@pobox.com (Mark Lord) * * See linux/MAINTAINERS for address of current maintainer. * @@ -98,7 +98,7 @@ #define CMD640_PREFETCH_MASKS 1 -//#define CMD640_DUMP_REGS +/*#define CMD640_DUMP_REGS */ #include <linux/types.h> #include <linux/kernel.h> @@ -112,7 +112,7 @@ /* * This flag is set in ide.c by the parameter: ide0=cmd640_vlb */ -int cmd640_vlb = 0; +int cmd640_vlb; /* * CMD640 specific registers definition. @@ -185,7 +185,6 @@ static DEFINE_SPINLOCK(cmd640_lock); * These are initialized to point at the devices we control */ static ide_hwif_t *cmd_hwif0, *cmd_hwif1; -static ide_drive_t *cmd_drives[4]; /* * Interface to access cmd640x registers @@ -207,13 +206,13 @@ static unsigned int cmd640_chip_version; /* PCI method 1 access */ -static void put_cmd640_reg_pci1 (u16 reg, u8 val) +static void put_cmd640_reg_pci1(u16 reg, u8 val) { outl_p((reg & 0xfc) | cmd640_key, 0xcf8); outb_p(val, (reg & 3) | 0xcfc); } -static u8 get_cmd640_reg_pci1 (u16 reg) +static u8 get_cmd640_reg_pci1(u16 reg) { outl_p((reg & 0xfc) | cmd640_key, 0xcf8); return inb_p((reg & 3) | 0xcfc); @@ -221,14 +220,14 @@ static u8 get_cmd640_reg_pci1 (u16 reg) /* PCI method 2 access (from CMD datasheet) */ -static void put_cmd640_reg_pci2 (u16 reg, u8 val) +static void put_cmd640_reg_pci2(u16 reg, u8 val) { outb_p(0x10, 0xcf8); outb_p(val, cmd640_key + reg); outb_p(0, 0xcf8); } -static u8 get_cmd640_reg_pci2 (u16 reg) +static u8 get_cmd640_reg_pci2(u16 reg) { u8 b; @@ -240,13 +239,13 @@ static u8 get_cmd640_reg_pci2 (u16 reg) /* VLB access */ -static void put_cmd640_reg_vlb (u16 reg, u8 val) +static void put_cmd640_reg_vlb(u16 reg, u8 val) { outb_p(reg, cmd640_key); outb_p(val, cmd640_key + 4); } -static u8 get_cmd640_reg_vlb (u16 reg) +static u8 get_cmd640_reg_vlb(u16 reg) { outb_p(reg, cmd640_key); return inb_p(cmd640_key + 4); @@ -268,11 +267,11 @@ static void put_cmd640_reg(u16 reg, u8 val) unsigned long flags; spin_lock_irqsave(&cmd640_lock, flags); - __put_cmd640_reg(reg,val); + __put_cmd640_reg(reg, val); spin_unlock_irqrestore(&cmd640_lock, flags); } -static int __init match_pci_cmd640_device (void) +static int __init match_pci_cmd640_device(void) { const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06}; unsigned int i; @@ -292,7 +291,7 @@ static int __init match_pci_cmd640_device (void) /* * Probe for CMD640x -- pci method 1 */ -static int __init probe_for_cmd640_pci1 (void) +static int __init probe_for_cmd640_pci1(void) { __get_cmd640_reg = get_cmd640_reg_pci1; __put_cmd640_reg = put_cmd640_reg_pci1; @@ -308,7 +307,7 @@ static int __init probe_for_cmd640_pci1 (void) /* * Probe for CMD640x -- pci method 2 */ -static int __init probe_for_cmd640_pci2 (void) +static int __init probe_for_cmd640_pci2(void) { __get_cmd640_reg = get_cmd640_reg_pci2; __put_cmd640_reg = put_cmd640_reg_pci2; @@ -322,7 +321,7 @@ static int __init probe_for_cmd640_pci2 (void) /* * Probe for CMD640x -- vlb */ -static int __init probe_for_cmd640_vlb (void) +static int __init probe_for_cmd640_vlb(void) { u8 b; @@ -343,7 +342,7 @@ static int __init probe_for_cmd640_vlb (void) * Returns 1 if an IDE interface/drive exists at 0x170, * Returns 0 otherwise. */ -static int __init secondary_port_responding (void) +static int __init secondary_port_responding(void) { unsigned long flags; @@ -367,7 +366,7 @@ static int __init secondary_port_responding (void) /* * Dump out all cmd640 registers. May be called from ide.c */ -static void cmd640_dump_regs (void) +static void cmd640_dump_regs(void) { unsigned int reg = cmd640_vlb ? 0x50 : 0x00; @@ -386,9 +385,8 @@ static void cmd640_dump_regs (void) * Check whether prefetch is on for a drive, * and initialize the unmask flags for safe operation. */ -static void __init check_prefetch (unsigned int index) +static void __init check_prefetch(ide_drive_t *drive, unsigned int index) { - ide_drive_t *drive = cmd_drives[index]; u8 b = get_cmd640_reg(prefetch_regs[index]); if (b & prefetch_masks[index]) { /* is prefetch off? */ @@ -404,28 +402,13 @@ static void __init check_prefetch (unsigned int index) } } -/* - * Figure out which devices we control - */ -static void __init setup_device_ptrs (void) -{ - cmd_hwif0 = &ide_hwifs[0]; - cmd_hwif1 = &ide_hwifs[1]; - - cmd_drives[0] = &cmd_hwif0->drives[0]; - cmd_drives[1] = &cmd_hwif0->drives[1]; - cmd_drives[2] = &cmd_hwif1->drives[0]; - cmd_drives[3] = &cmd_hwif1->drives[1]; -} - #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED /* * Sets prefetch mode for a drive. */ -static void set_prefetch_mode (unsigned int index, int mode) +static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode) { - ide_drive_t *drive = cmd_drives[index]; unsigned long flags; int reg = prefetch_regs[index]; u8 b; @@ -452,7 +435,7 @@ static void set_prefetch_mode (unsigned int index, int mode) /* * Dump out current drive clocks settings */ -static void display_clocks (unsigned int index) +static void display_clocks(unsigned int index) { u8 active_count, recovery_count; @@ -471,7 +454,7 @@ static void display_clocks (unsigned int index) * Pack active and recovery counts into single byte representation * used by controller */ -static inline u8 pack_nibbles (u8 upper, u8 lower) +static inline u8 pack_nibbles(u8 upper, u8 lower) { return ((upper & 0x0f) << 4) | (lower & 0x0f); } @@ -479,7 +462,7 @@ static inline u8 pack_nibbles (u8 upper, u8 lower) /* * This routine retrieves the initial drive timings from the chipset. */ -static void __init retrieve_drive_counts (unsigned int index) +static void __init retrieve_drive_counts(unsigned int index) { u8 b; @@ -488,10 +471,10 @@ static void __init retrieve_drive_counts (unsigned int index) */ b = get_cmd640_reg(arttim_regs[index]) & ~0x3f; switch (b) { - case 0x00: b = 4; break; - case 0x80: b = 3; break; - case 0x40: b = 2; break; - default: b = 5; break; + case 0x00: b = 4; break; + case 0x80: b = 3; break; + case 0x40: b = 2; break; + default: b = 5; break; } setup_counts[index] = b; @@ -508,7 +491,7 @@ static void __init retrieve_drive_counts (unsigned int index) * This routine writes the prepared setup/active/recovery counts * for a drive into the cmd640 chipset registers to active them. */ -static void program_drive_counts (unsigned int index) +static void program_drive_counts(ide_drive_t *drive, unsigned int index) { unsigned long flags; u8 setup_count = setup_counts[index]; @@ -522,8 +505,11 @@ static void program_drive_counts (unsigned int index) * so we merge the timings, using the slowest value for each timing. */ if (index > 1) { - unsigned int mate; - if (cmd_drives[mate = index ^ 1]->present) { + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *peer = &hwif->drives[!drive->select.b.unit]; + unsigned int mate = index ^ 1; + + if (peer->present) { if (setup_count < setup_counts[mate]) setup_count = setup_counts[mate]; if (active_count < active_counts[mate]) @@ -537,11 +523,11 @@ static void program_drive_counts (unsigned int index) * Convert setup_count to internal chipset representation */ switch (setup_count) { - case 4: setup_count = 0x00; break; - case 3: setup_count = 0x80; break; - case 1: - case 2: setup_count = 0x40; break; - default: setup_count = 0xc0; /* case 5 */ + case 4: setup_count = 0x00; break; + case 3: setup_count = 0x80; break; + case 1: + case 2: setup_count = 0x40; break; + default: setup_count = 0xc0; /* case 5 */ } /* @@ -562,7 +548,8 @@ static void program_drive_counts (unsigned int index) /* * Set a specific pio_mode for a drive */ -static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time) +static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, + u8 pio_mode, unsigned int cycle_time) { int setup_time, active_time, recovery_time, clock_time; u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; @@ -574,15 +561,15 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle active_time = ide_pio_timings[pio_mode].active_time; recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / bus_speed; - cycle_count = (cycle_time + clock_time - 1) / clock_time; + cycle_count = DIV_ROUND_UP(cycle_time, clock_time); - setup_count = (setup_time + clock_time - 1) / clock_time; + setup_count = DIV_ROUND_UP(setup_time, clock_time); - active_count = (active_time + clock_time - 1) / clock_time; + active_count = DIV_ROUND_UP(active_time, clock_time); if (active_count < 2) active_count = 2; /* minimum allowed by cmd640 */ - recovery_count = (recovery_time + clock_time - 1) / clock_time; + recovery_count = DIV_ROUND_UP(recovery_time, clock_time); recovery_count2 = cycle_count - (setup_count + active_count); if (recovery_count2 > recovery_count) recovery_count = recovery_count2; @@ -611,7 +598,7 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle * 1) this is the wrong place to do it (proper is do_special() in ide.c) * 2) in practice this is rarely, if ever, necessary */ - program_drive_counts (index); + program_drive_counts(drive, index); } static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) @@ -619,32 +606,26 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) unsigned int index = 0, cycle_time; u8 b; - while (drive != cmd_drives[index]) { - if (++index > 3) { - printk(KERN_ERR "%s: bad news in %s\n", - drive->name, __FUNCTION__); - return; - } - } switch (pio) { - case 6: /* set fast-devsel off */ - case 7: /* set fast-devsel on */ - b = get_cmd640_reg(CNTRL) & ~0x27; - if (pio & 1) - b |= 0x27; - put_cmd640_reg(CNTRL, b); - printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis"); - return; - - case 8: /* set prefetch off */ - case 9: /* set prefetch on */ - set_prefetch_mode(index, pio & 1); - printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis"); - return; + case 6: /* set fast-devsel off */ + case 7: /* set fast-devsel on */ + b = get_cmd640_reg(CNTRL) & ~0x27; + if (pio & 1) + b |= 0x27; + put_cmd640_reg(CNTRL, b); + printk("%s: %sabled cmd640 fast host timing (devsel)\n", + drive->name, (pio & 1) ? "en" : "dis"); + return; + case 8: /* set prefetch off */ + case 9: /* set prefetch on */ + set_prefetch_mode(drive, index, pio & 1); + printk("%s: %sabled cmd640 prefetch\n", + drive->name, (pio & 1) ? "en" : "dis"); + return; } cycle_time = ide_pio_cycle_time(drive, pio); - cmd640_set_mode(index, pio, cycle_time); + cmd640_set_mode(drive, index, pio, cycle_time); printk("%s: selected cmd640 PIO mode%d (%dns)", drive->name, pio, cycle_time); @@ -749,7 +730,7 @@ static int __init cmd640x_init(void) cfr = get_cmd640_reg(CFR); cmd640_chip_version = cfr & CFR_DEVREV; if (cmd640_chip_version == 0) { - printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version); + printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version); return 0; } @@ -764,17 +745,19 @@ static int __init cmd640x_init(void) printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); + cmd_hwif0 = ide_find_port(); + /* * Initialize data for primary port */ - setup_device_ptrs (); - - ide_init_port_hw(cmd_hwif0, &hw[0]); + if (cmd_hwif0) { + ide_init_port_hw(cmd_hwif0, &hw[0]); #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; + cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - idx[0] = cmd_hwif0->index; + idx[0] = cmd_hwif0->index; + } /* * Ensure compatibility by always using the slowest timings @@ -786,10 +769,13 @@ static int __init cmd640x_init(void) put_cmd640_reg(CMDTIM, 0); put_cmd640_reg(BRST, 0x40); + cmd_hwif1 = ide_find_port(); + /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { + if (cmd_hwif1 && + cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { port2 = "not probed"; } else { b = get_cmd640_reg(CNTRL); @@ -820,7 +806,7 @@ static int __init cmd640x_init(void) /* * Initialize data for secondary cmd640 port, if enabled */ - if (second_port_cmd640) { + if (second_port_cmd640 && cmd_hwif1) { ide_init_port_hw(cmd_hwif1, &hw[1]); #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; @@ -828,7 +814,7 @@ static int __init cmd640x_init(void) idx[1] = cmd_hwif1->index; } - printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, + printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); /* @@ -836,18 +822,30 @@ static int __init cmd640x_init(void) * Do not unnecessarily disturb any prior BIOS setup of these. */ for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { - ide_drive_t *drive = cmd_drives[index]; + ide_drive_t *drive; + + if (index > 1) { + if (cmd_hwif1 == NULL) + continue; + drive = &cmd_hwif1->drives[index & 1]; + } else { + if (cmd_hwif0 == NULL) + continue; + drive = &cmd_hwif0->drives[index & 1]; + } + #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED if (drive->autotune || ((index > 1) && second_port_toggled)) { - /* - * Reset timing to the slowest speed and turn off prefetch. - * This way, the drive identify code has a better chance. + /* + * Reset timing to the slowest speed and turn off + * prefetch. This way, the drive identify code has + * a better chance. */ setup_counts [index] = 4; /* max possible */ active_counts [index] = 16; /* max possible */ recovery_counts [index] = 16; /* max possible */ - program_drive_counts (index); - set_prefetch_mode (index, 0); + program_drive_counts(drive, index); + set_prefetch_mode(drive, index, 0); printk("cmd640: drive%d timings/prefetch cleared\n", index); } else { /* @@ -855,7 +853,7 @@ static int __init cmd640x_init(void) * This preserves any prior BIOS setup. */ retrieve_drive_counts (index); - check_prefetch (index); + check_prefetch(drive, index); printk("cmd640: drive%d timings/prefetch(%s) preserved", index, drive->no_io_32bit ? "off" : "on"); display_clocks(index); @@ -864,7 +862,7 @@ static int __init cmd640x_init(void) /* * Set the drive unmask flags to match the prefetch setting */ - check_prefetch (index); + check_prefetch(drive, index); printk("cmd640: drive%d timings/prefetch(%s) preserved\n", index, drive->no_io_32bit ? "off" : "on"); #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index edabe6299ef..8baccfef237 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -440,8 +440,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { .init_hwif = init_hwif_cmd64x, .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | - IDE_HFLAG_ABUSE_PREFETCH | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = 0x00, /* no udma */ @@ -451,7 +450,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .chipset = ide_cmd646, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, @@ -460,7 +459,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { .init_chipset = init_chipset_cmd64x, .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -469,7 +468,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { .init_chipset = init_chipset_cmd64x, .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 1c163e4ef03..01b37ecb5a5 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -122,8 +122,7 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) IDE_HFLAG_CS5520 | \ IDE_HFLAG_VDMA | \ IDE_HFLAG_NO_ATAPI_DMA | \ - IDE_HFLAG_ABUSE_SET_DMA_MODE |\ - IDE_HFLAG_BOOTABLE, \ + IDE_HFLAG_ABUSE_SET_DMA_MODE, \ .pio_mask = ATA_PIO4, \ } diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 941a1344820..56a369c2a78 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -249,8 +249,7 @@ static const struct ide_port_info cs5530_chipset __devinitdata = { .init_chipset = init_chipset_cs5530, .init_hwif = init_hwif_cs5530, .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_POST_SET_MODE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index d7b5ea992e9..c9685f239c6 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -186,7 +186,7 @@ static const struct ide_port_info cs5535_chipset __devinitdata = { .name = "CS5535", .init_hwif = init_hwif_cs5535, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_BOOTABLE, + IDE_HFLAG_ABUSE_SET_DMA_MODE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 724cbacf4e5..08eab7e7f05 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -6,7 +6,7 @@ * * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. * Writing the driver was quite simple, since most of the job is - * done by the generic pci-ide support. + * done by the generic pci-ide support. * The hard part was finding the CY82C693's datasheet on Cypress's * web page :-(. But Altavista solved this problem :-). * @@ -15,12 +15,12 @@ * - I recently got a 16.8G IBM DTTA, so I was able to test it with * a large and fast disk - the results look great, so I'd say the * driver is working fine :-) - * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA - * - this is my first linux driver, so there's probably a lot of room + * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA + * - this is my first linux driver, so there's probably a lot of room * for optimizations and bug fixing, so feel free to do it. * - use idebus=xx parameter to set PCI bus speed - needed to calc * timings for PIO modes (default will be 40) - * - if using PIO mode it's a good idea to set the PIO mode and + * - if using PIO mode it's a good idea to set the PIO mode and * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda * - I had some problems with my IBM DHEA with PIO modes < 2 * (lost interrupts) ????? @@ -110,11 +110,11 @@ typedef struct pio_clocks_s { * calc clocks using bus_speed * returns (rounded up) time in bus clocks for time in ns */ -static int calc_clk (int time, int bus_speed) +static int calc_clk(int time, int bus_speed) { int clocks; - clocks = (time*bus_speed+999)/1000 -1; + clocks = (time*bus_speed+999)/1000 - 1; if (clocks < 0) clocks = 0; @@ -132,8 +132,8 @@ static int calc_clk (int time, int bus_speed) * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used * for mode 3 and 4 drives 8 and 16-bit timings are the same * - */ -static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) + */ +static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { int clk1, clk2; int bus_speed = system_bus_clock(); /* get speed of PCI bus */ @@ -158,7 +158,7 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ /* note: we use the same values for 16bit IOR and IOW - * those are all the same, since I don't have other + * those are all the same, since I don't have other * timings than those from ide-lib.c */ @@ -186,7 +186,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(index, CY82_INDEX_PORT); data = inb(CY82_DATA_PORT); - printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", + printk(KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", drive->name, HWIF(drive)->channel, drive->select.b.unit, (data&0x3), ((data>>2)&1)); #endif /* CY82C693_DEBUG_LOGS */ @@ -202,7 +202,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) mode & 3, single); #endif /* CY82C693_DEBUG_INFO */ - /* + /* * note: below we set the value for Bus Master IDE TimeOut Register * I'm not absolutly sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with @@ -216,8 +216,8 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); -#if CY82C693_DEBUG_INFO - printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", +#if CY82C693_DEBUG_INFO + printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", drive->name, data); #endif /* CY82C693_DEBUG_INFO */ } @@ -242,14 +242,14 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) #if CY82C693_DEBUG_LOGS /* for debug let's show the register values */ - - if (drive->select.b.unit == 0) { + + if (drive->select.b.unit == 0) { /* - * get master drive registers + * get master drive registers * address setup control register * is 32 bit !!! - */ - pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); + */ + pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= 0x0F; /* now let's get the remaining registers */ @@ -261,7 +261,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) * set slave drive registers * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= 0xF0; @@ -288,9 +288,9 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) * set master drive * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); - + addrCtrl &= (~0xF); addrCtrl |= (unsigned int)pclk.address_time; pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); @@ -299,14 +299,14 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); - + addrCtrl &= 0xF; } else { /* * set slave drive * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF0); @@ -320,7 +320,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) addrCtrl >>= 4; addrCtrl &= 0xF; - } + } #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " @@ -340,41 +340,41 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c #ifdef CY82C693_SETDMA_CLOCK u8 data = 0; -#endif /* CY82C693_SETDMA_CLOCK */ +#endif /* CY82C693_SETDMA_CLOCK */ /* write info about this verion of the driver */ printk(KERN_INFO CY82_VERSION "\n"); #ifdef CY82C693_SETDMA_CLOCK /* okay let's set the DMA clock speed */ - - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - data = inb(CY82_DATA_PORT); + + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + data = inb(CY82_DATA_PORT); #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n", name, data); #endif /* CY82C693_DEBUG_INFO */ - /* + /* * for some reason sometimes the DMA controller * speed is set to ATCLK/2 ???? - we fix this here - * + * * note: i don't know what causes this strange behaviour, * but even changing the dma speed doesn't solve it :-( - * the ide performance is still only half the normal speed - * + * the ide performance is still only half the normal speed + * * if anybody knows what goes wrong with my machine, please * let me know - ASK - */ + */ data |= 0x03; - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - outb(data, CY82_DATA_PORT); + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + outb(data, CY82_DATA_PORT); #if CY82C693_DEBUG_INFO - printk (KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", + printk(KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", name, data); #endif /* CY82C693_DEBUG_INFO */ @@ -410,8 +410,7 @@ static const struct ide_port_info cy82c693_chipset __devinitdata = { .init_iops = init_iops_cy82c693, .init_hwif = init_hwif_cy82c693, .chipset = ide_cy82c693, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_CY82C693 | - IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, @@ -424,7 +423,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev /* CY82C693 is more than only a IDE controller. Function 1 is primary IDE channel, function 2 - secondary. */ - if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && PCI_FUNC(dev->devfn) == 1) { dev2 = pci_get_slot(dev->bus, dev->devfn + 1); ret = ide_setup_pci_devices(dev, dev2, &cy82c693_chipset); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 961698d655e..753b86fc663 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -71,14 +71,13 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) if (setup[i]) outb(setup[i], base + i); } - pci_release_regions(dev); /* IDE layer handles regions itself */ memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base + 0x10, base + 0x1e); hw.irq = dev->irq; hw.chipset = ide_pci; /* this enables IRQ sharing */ - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) goto out_disable; @@ -90,6 +89,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); + hwif->mmio = 1; hwif->quirkproc = &ide_undecoded_slave; idx[0] = i; @@ -110,6 +110,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) out_disable: printk(KERN_ERR "delkin_cb: no IDE devices found\n"); + pci_release_regions(dev); pci_disable_device(dev); return -ENODEV; } @@ -122,6 +123,7 @@ delkin_cb_remove (struct pci_dev *dev) if (hwif) ide_unregister(hwif->index); + pci_release_regions(dev); pci_disable_device(dev); } diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 7fd83a9d4de..041720e2276 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -38,8 +38,7 @@ MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE st { \ .name = name_str, \ .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \ - extra_flags | \ - IDE_HFLAG_BOOTABLE, \ + extra_flags, \ .swdma_mask = ATA_SWDMA2, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = ATA_UDMA6, \ @@ -50,9 +49,8 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { { /* 1 */ .name = "NS87410", - .enablebits = {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x43, 0x08, 0x08}, {0x47, 0x08, 0x08} }, + .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, @@ -99,7 +97,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. */ - + static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &generic_chipsets[id->driver_data]; diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 9f01da46b01..9f2fc309400 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -133,7 +133,7 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = { .init_chipset = init_chipset_hpt34x, .init_hwif = init_hwif_hpt34x, .extra = 16, - .host_flags = IDE_HFLAGS_HPT34X, + .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE, .pio_mask = ATA_PIO5, }, { /* 1 */ diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 82d0e318a1f..a4909067214 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1557,7 +1557,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic hpt374_init(dev, dev2); else { if (hpt36x_init(dev, dev2)) - d.host_flags |= IDE_HFLAG_BOOTABLE; + d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE; } ret = ide_setup_pci_devices(dev, dev2, &d); diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index e3427eaab43..5b5b0cc4b76 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -35,7 +35,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) static DEFINE_SPINLOCK(tune_lock); int control = 0; - static const u8 timings[][2]= { + static const u8 timings[][2] = { { 0, 0 }, { 0, 0 }, { 1, 0 }, @@ -105,11 +105,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) if (!(reg48 & u_flag)) pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed >= XFER_UDMA_5) { + if (speed >= XFER_UDMA_5) pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - } else { + else pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - } if ((reg4a & a_speed) != u_speed) pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); @@ -170,9 +169,8 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif) { \ .name = name_str, \ .init_hwif = init_hwif_it8213, \ - .enablebits = {{0x41,0x80,0x80}}, \ - .host_flags = IDE_HFLAG_SINGLE | \ - IDE_HFLAG_BOOTABLE, \ + .enablebits = { {0x41, 0x80, 0x80} }, \ + .host_flags = IDE_HFLAG_SINGLE, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ .mwdma_mask = ATA_MWDMA12_ONLY, \ diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index d8a167451fd..a38ec47423a 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -523,16 +523,12 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive) static void __devinit init_hwif_it821x(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL); + struct it821x_dev **itdevs = (struct it821x_dev **)pci_get_drvdata(dev); + struct it821x_dev *idev = itdevs[hwif->channel]; u8 conf; hwif->quirkproc = &it821x_quirkproc; - if (idev == NULL) { - printk(KERN_ERR "it821x: out of memory, falling back to legacy behaviour.\n"); - return; - } - ide_set_hwifdata(hwif, idev); pci_read_config_byte(dev, 0x50, &conf); @@ -623,7 +619,6 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha .name = name_str, \ .init_chipset = init_chipset_it821x, \ .init_hwif = init_hwif_it821x, \ - .host_flags = IDE_HFLAG_BOOTABLE, \ .pio_mask = ATA_PIO4, \ } @@ -642,6 +637,22 @@ static const struct ide_port_info it821x_chipsets[] __devinitdata = { static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { + struct it821x_dev *itdevs[2] = { NULL, NULL} , *itdev; + unsigned int i; + + for (i = 0; i < 2; i++) { + itdev = kzalloc(sizeof(*itdev), GFP_KERNEL); + if (itdev == NULL) { + kfree(itdevs[0]); + printk(KERN_ERR "it821x: out of memory\n"); + return -ENOMEM; + } + + itdevs[i] = itdev; + } + + pci_set_drvdata(dev, itdevs); + return ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]); } diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index a56bcb4f22f..673f7dc8ba6 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -63,8 +63,7 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) * actually do our cable checking etc. Thankfully we don't need * to do the plumbing for other cases. */ - switch (port_map[port]) - { + switch (port_map[port]) { case PORT_PATA0: if (control & (1 << 3)) /* 40/80 pin primary */ return ATA_CBL_PATA40; @@ -114,7 +113,6 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) static const struct ide_port_info jmicron_chipset __devinitdata = { .name = "JMB", .init_hwif = init_hwif_jmicron, - .host_flags = IDE_HFLAG_BOOTABLE, .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index 75513320aad..3015d6916d4 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -265,8 +265,7 @@ static const struct ide_port_info ns87415_chipset __devinitdata = { #endif .init_hwif = init_hwif_ns87415, .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_NO_ATAPI_DMA, }; static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 46e8748f507..88a4dd94eee 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -57,9 +57,9 @@ * (use idebus=xx to select PCI bus speed). * * Version 0.1, Nov 8, 1996 - * by Jaromir Koutek, for 2.1.8. + * by Jaromir Koutek, for 2.1.8. * Initial version of driver. - * + * * Version 0.2 * Number 0.2 skipped. * @@ -75,7 +75,7 @@ * by Jaromir Koutek * Updates for use with (again) new IDE block driver. * Update of documentation. - * + * * Version 0.6, Jan 2, 1999 * by Jaromir Koutek * Reversed to version 0.3 of the driver, because @@ -208,29 +208,34 @@ typedef struct pio_clocks_s { static void compute_clocks(int pio, pio_clocks_t *clks) { - if (pio != PIO_NOT_EXIST) { - int adr_setup, data_pls; + if (pio != PIO_NOT_EXIST) { + int adr_setup, data_pls; int bus_speed = system_bus_clock(); - adr_setup = ide_pio_timings[pio].setup_time; - data_pls = ide_pio_timings[pio].active_time; - clks->address_time = cmpt_clk(adr_setup, bus_speed); - clks->data_time = cmpt_clk(data_pls, bus_speed); - clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time - - adr_setup-data_pls, bus_speed); - if (clks->address_time<1) clks->address_time = 1; - if (clks->address_time>4) clks->address_time = 4; - if (clks->data_time<1) clks->data_time = 1; - if (clks->data_time>16) clks->data_time = 16; - if (clks->recovery_time<2) clks->recovery_time = 2; - if (clks->recovery_time>17) clks->recovery_time = 17; + adr_setup = ide_pio_timings[pio].setup_time; + data_pls = ide_pio_timings[pio].active_time; + clks->address_time = cmpt_clk(adr_setup, bus_speed); + clks->data_time = cmpt_clk(data_pls, bus_speed); + clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time + - adr_setup-data_pls, bus_speed); + if (clks->address_time < 1) + clks->address_time = 1; + if (clks->address_time > 4) + clks->address_time = 4; + if (clks->data_time < 1) + clks->data_time = 1; + if (clks->data_time > 16) + clks->data_time = 16; + if (clks->recovery_time < 2) + clks->recovery_time = 2; + if (clks->recovery_time > 17) + clks->recovery_time = 17; } else { clks->address_time = 1; clks->data_time = 1; clks->recovery_time = 2; /* minimal values */ } - } static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) @@ -247,8 +252,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) /* sets drive->drive_data for both drives */ compute_pios(drive, pio); - pio1 = hwif->drives[0].drive_data; - pio2 = hwif->drives[1].drive_data; + pio1 = hwif->drives[0].drive_data; + pio2 = hwif->drives[1].drive_data; compute_clocks(pio1, &first); compute_clocks(pio2, &second); @@ -275,7 +280,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_lock_irqsave(&opti621_lock, flags); - reg_base = hwif->io_ports[IDE_DATA_OFFSET]; + reg_base = hwif->io_ports[IDE_DATA_OFFSET]; /* allow Register-B */ outb(0xc0, reg_base + CNTRL_REG); @@ -324,7 +329,7 @@ static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) /* * init_hwif_opti621() is called once for each hwif found at boot. */ -static void __devinit init_hwif_opti621 (ide_hwif_t *hwif) +static void __devinit init_hwif_opti621(ide_hwif_t *hwif) { hwif->port_init_devs = opti621_port_init_devs; hwif->set_pio_mode = &opti621_set_pio_mode; @@ -334,18 +339,16 @@ static const struct ide_port_info opti621_chipsets[] __devinitdata = { { /* 0 */ .name = "OPTI621", .init_hwif = init_hwif_opti621, - .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}}, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .pio_mask = ATA_PIO3, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, - },{ /* 1 */ + }, { /* 1 */ .name = "OPTI621X", .init_hwif = init_hwif_opti621, - .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}}, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .pio_mask = ATA_PIO3, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index decef0f4767..89d74ffdb20 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -307,9 +307,9 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif) } #ifndef CONFIG_IA64 - #define IDE_HFLAGS_PIIX (IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE) + #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS #else - #define IDE_HFLAGS_PIIX IDE_HFLAG_BOOTABLE + #define IDE_HFLAGS_PIIX 0 #endif #define DECLARE_PIIX_DEV(name_str, udma) \ diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c index 51676612f78..532154adba2 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/pci/rz1000.c @@ -43,7 +43,7 @@ static const struct ide_port_info rz1000_chipset __devinitdata = { .name = "RZ100x", .init_hwif = init_hwif_rz1000, .chipset = ide_rz1000, - .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_NO_DMA, }; static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 561aa47c772..44985c8f36e 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -307,8 +307,7 @@ static const struct ide_port_info sc1200_chipset __devinitdata = { .init_hwif = init_hwif_sc1200, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_ABUSE_DMA_MODES | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_ABUSE_DMA_MODES, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index ef07c7a8b97..52145796f12 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -65,7 +65,7 @@ static struct scc_ports { unsigned long ctl, dma; - unsigned char hwif_id; /* for removing hwif from system */ + ide_hwif_t *hwif; /* for removing port from system */ } scc_ports[MAX_HWIFS]; /* PIO transfer mode table */ @@ -534,12 +534,8 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; int i; - for (i = 0; i < MAX_HWIFS; i++) { - hwif = &ide_hwifs[i]; - if (hwif->chipset == ide_unknown) - break; /* pick an unused entry */ - } - if (i == MAX_HWIFS) { + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR "%s: too many IDE interfaces, " "no room in table\n", SCC_PATA_NAME); return -ENOMEM; @@ -696,7 +692,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) { struct scc_ports *ports = ide_get_hwifdata(hwif); - ports->hwif_id = hwif->index; + ports->hwif = hwif; hwif->dma_command = hwif->dma_base; hwif->dma_status = hwif->dma_base + 0x04; @@ -725,8 +721,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) .name = name_str, \ .init_iops = init_iops_scc, \ .init_hwif = init_hwif_scc, \ - .host_flags = IDE_HFLAG_SINGLE | \ - IDE_HFLAG_BOOTABLE, \ + .host_flags = IDE_HFLAG_SINGLE, \ .pio_mask = ATA_PIO4, \ } @@ -758,7 +753,7 @@ static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_i static void __devexit scc_remove(struct pci_dev *dev) { struct scc_ports *ports = pci_get_drvdata(dev); - ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id]; + ide_hwif_t *hwif = ports->hwif; unsigned long ctl_base = pci_resource_start(dev, 0); unsigned long dma_base = pci_resource_start(dev, 1); unsigned long ctl_size = pci_resource_len(dev, 0); diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index c11880b0709..cfe92746979 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -350,8 +350,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) #define IDE_HFLAGS_SVWKS \ (IDE_HFLAG_LEGACY_IRQS | \ - IDE_HFLAG_ABUSE_SET_DMA_MODE | \ - IDE_HFLAG_BOOTABLE) + IDE_HFLAG_ABUSE_SET_DMA_MODE) static const struct ide_port_info serverworks_chipsets[] __devinitdata = { { /* 0 */ @@ -418,7 +417,7 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device else if (idx == 2 || idx == 3) { if ((PCI_FUNC(dev->devfn) & 1) == 0) { if (pci_resource_start(dev, 0) != 0x01f1) - d.host_flags &= ~IDE_HFLAG_BOOTABLE; + d.host_flags |= IDE_HFLAG_NON_BOOTABLE; d.host_flags |= IDE_HFLAG_SINGLE; } else d.host_flags &= ~IDE_HFLAG_SINGLE; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 9d1a3038af9..6bd9523cf64 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -590,20 +590,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) unsigned long bar0, cmd_phys_base, ctl; void __iomem *virt_base; ide_hwif_t *hwif; - int h; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw; struct ide_port_info d = sgiioc4_port_info; - /* - * Find an empty HWIF; if none available, return -ENOMEM. - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->chipset == ide_unknown) - break; - } - if (h == MAX_HWIFS) { + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", DRV_NAME); return -ENOMEM; diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index b6be1b45f32..c9ecab8aeb6 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -808,7 +808,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) .init_chipset = init_chipset_siimage, \ .init_iops = init_iops_siimage, \ .init_hwif = init_hwif_siimage, \ - .host_flags = IDE_HFLAG_BOOTABLE, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = ATA_UDMA6, \ diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 512bb4c1fd5..181b647e5ca 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -59,10 +59,10 @@ #define ATA_16 0x01 #define ATA_33 0x02 #define ATA_66 0x03 -#define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout +#define ATA_100a 0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */ #define ATA_100 0x05 -#define ATA_133a 0x06 // SiS961b with 133 support -#define ATA_133 0x07 // SiS962/963 +#define ATA_133a 0x06 /* SiS961b with 133 support */ +#define ATA_133 0x07 /* SiS962/963 */ static u8 chipset_family; @@ -111,69 +111,70 @@ static const struct { Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */ /* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */ -static u8 cycle_time_offset[] = {0,0,5,4,4,0,0}; -static u8 cycle_time_range[] = {0,0,2,3,3,4,4}; +static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 }; +static u8 cycle_time_range[] = { 0, 0, 2, 3, 3, 4, 4 }; static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { - {0,0,0,0,0,0,0}, /* no udma */ - {0,0,0,0,0,0,0}, /* no udma */ - {3,2,1,0,0,0,0}, /* ATA_33 */ - {7,5,3,2,1,0,0}, /* ATA_66 */ - {7,5,3,2,1,0,0}, /* ATA_100a (730 specific), differences are on cycle_time range and offset */ - {11,7,5,4,2,1,0}, /* ATA_100 */ - {15,10,7,5,3,2,1}, /* ATA_133a (earliest 691 southbridges) */ - {15,10,7,5,3,2,1}, /* ATA_133 */ + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 3, 2, 1, 0, 0, 0, 0 }, /* ATA_33 */ + { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_66 */ + { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific), + different cycle_time range and offset */ + { 11, 7, 5, 4, 2, 1, 0 }, /* ATA_100 */ + { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */ + { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */ }; /* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133 See SiS962 data sheet for more detail */ static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { - {0,0,0,0,0,0,0}, /* no udma */ - {0,0,0,0,0,0,0}, /* no udma */ - {2,1,1,0,0,0,0}, - {4,3,2,1,0,0,0}, - {4,3,2,1,0,0,0}, - {6,4,3,1,1,1,0}, - {9,6,4,2,2,2,2}, - {9,6,4,2,2,2,2}, + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 2, 1, 1, 0, 0, 0, 0 }, + { 4, 3, 2, 1, 0, 0, 0 }, + { 4, 3, 2, 1, 0, 0, 0 }, + { 6, 4, 3, 1, 1, 1, 0 }, + { 9, 6, 4, 2, 2, 2, 2 }, + { 9, 6, 4, 2, 2, 2, 2 }, }; /* Initialize time, Active time, Recovery time vary across IDE clock settings. These 3 arrays hold the register value for PIO0/1/2/3/4 and DMA0/1/2 mode in order */ static u8 ini_time_value[][8] = { - {0,0,0,0,0,0,0,0}, - {0,0,0,0,0,0,0,0}, - {2,1,0,0,0,1,0,0}, - {4,3,1,1,1,3,1,1}, - {4,3,1,1,1,3,1,1}, - {6,4,2,2,2,4,2,2}, - {9,6,3,3,3,6,3,3}, - {9,6,3,3,3,6,3,3}, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 2, 1, 0, 0, 0, 1, 0, 0 }, + { 4, 3, 1, 1, 1, 3, 1, 1 }, + { 4, 3, 1, 1, 1, 3, 1, 1 }, + { 6, 4, 2, 2, 2, 4, 2, 2 }, + { 9, 6, 3, 3, 3, 6, 3, 3 }, + { 9, 6, 3, 3, 3, 6, 3, 3 }, }; static u8 act_time_value[][8] = { - {0,0,0,0,0,0,0,0}, - {0,0,0,0,0,0,0,0}, - {9,9,9,2,2,7,2,2}, - {19,19,19,5,4,14,5,4}, - {19,19,19,5,4,14,5,4}, - {28,28,28,7,6,21,7,6}, - {38,38,38,10,9,28,10,9}, - {38,38,38,10,9,28,10,9}, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 9, 9, 9, 2, 2, 7, 2, 2 }, + { 19, 19, 19, 5, 4, 14, 5, 4 }, + { 19, 19, 19, 5, 4, 14, 5, 4 }, + { 28, 28, 28, 7, 6, 21, 7, 6 }, + { 38, 38, 38, 10, 9, 28, 10, 9 }, + { 38, 38, 38, 10, 9, 28, 10, 9 }, }; static u8 rco_time_value[][8] = { - {0,0,0,0,0,0,0,0}, - {0,0,0,0,0,0,0,0}, - {9,2,0,2,0,7,1,1}, - {19,5,1,5,2,16,3,2}, - {19,5,1,5,2,16,3,2}, - {30,9,3,9,4,25,6,4}, - {40,12,4,12,5,34,12,5}, - {40,12,4,12,5,34,12,5}, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 9, 2, 0, 2, 0, 7, 1, 1 }, + { 19, 5, 1, 5, 2, 16, 3, 2 }, + { 19, 5, 1, 5, 2, 16, 3, 2 }, + { 30, 9, 3, 9, 4, 25, 6, 4 }, + { 40, 12, 4, 12, 5, 34, 12, 5 }, + { 40, 12, 4, 12, 5, 34, 12, 5 }, }; /* * Printing configuration */ /* Used for chipset type printing at boot time */ -static char* chipset_capability[] = { +static char *chipset_capability[] = { "ATA", "ATA 16", "ATA 33", "ATA 66", "ATA 100 (1st gen)", "ATA 100 (2nd gen)", @@ -272,7 +273,7 @@ static void sis_program_timings(ide_drive_t *drive, const u8 mode) sis_ata133_program_timings(drive, mode); } -static void config_drive_art_rwp (ide_drive_t *drive) +static void config_drive_art_rwp(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -358,8 +359,7 @@ static u8 sis5513_ata133_udma_filter(ide_drive_t *drive) return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5; } -/* Chip detection and general config */ -static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name) +static int __devinit sis_find_family(struct pci_dev *dev) { struct pci_dev *host; int i = 0; @@ -381,7 +381,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c chipset_family = ATA_100a; } pci_dev_put(host); - + printk(KERN_INFO "SIS5513: %s %s controller\n", SiSHostChipInfo[i].name, chipset_capability[chipset_family]); } @@ -440,63 +440,60 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c } } - if (!chipset_family) - return -1; + return chipset_family; +} +static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev, + const char *name) +{ /* Make general config ops here 1/ tell IDE channels to operate in Compatibility mode only 2/ tell old chips to allow per drive IDE timings */ - { - u8 reg; - u16 regw; - - switch(chipset_family) { - case ATA_133: - /* SiS962 operation mode */ - pci_read_config_word(dev, 0x50, ®w); - if (regw & 0x08) - pci_write_config_word(dev, 0x50, regw&0xfff7); - pci_read_config_word(dev, 0x52, ®w); - if (regw & 0x08) - pci_write_config_word(dev, 0x52, regw&0xfff7); - break; - case ATA_133a: - case ATA_100: - /* Fixup latency */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); - /* Set compatibility bit */ - pci_read_config_byte(dev, 0x49, ®); - if (!(reg & 0x01)) { - pci_write_config_byte(dev, 0x49, reg|0x01); - } - break; - case ATA_100a: - case ATA_66: - /* Fixup latency */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10); - - /* On ATA_66 chips the bit was elsewhere */ - pci_read_config_byte(dev, 0x52, ®); - if (!(reg & 0x04)) { - pci_write_config_byte(dev, 0x52, reg|0x04); - } - break; - case ATA_33: - /* On ATA_33 we didn't have a single bit to set */ - pci_read_config_byte(dev, 0x09, ®); - if ((reg & 0x0f) != 0x00) { - pci_write_config_byte(dev, 0x09, reg&0xf0); - } - case ATA_16: - /* force per drive recovery and active timings - needed on ATA_33 and below chips */ - pci_read_config_byte(dev, 0x52, ®); - if (!(reg & 0x08)) { - pci_write_config_byte(dev, 0x52, reg|0x08); - } - break; - } + u8 reg; + u16 regw; + + switch (chipset_family) { + case ATA_133: + /* SiS962 operation mode */ + pci_read_config_word(dev, 0x50, ®w); + if (regw & 0x08) + pci_write_config_word(dev, 0x50, regw&0xfff7); + pci_read_config_word(dev, 0x52, ®w); + if (regw & 0x08) + pci_write_config_word(dev, 0x52, regw&0xfff7); + break; + case ATA_133a: + case ATA_100: + /* Fixup latency */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(dev, 0x49, ®); + if (!(reg & 0x01)) + pci_write_config_byte(dev, 0x49, reg|0x01); + break; + case ATA_100a: + case ATA_66: + /* Fixup latency */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10); + + /* On ATA_66 chips the bit was elsewhere */ + pci_read_config_byte(dev, 0x52, ®); + if (!(reg & 0x04)) + pci_write_config_byte(dev, 0x52, reg|0x04); + break; + case ATA_33: + /* On ATA_33 we didn't have a single bit to set */ + pci_read_config_byte(dev, 0x09, ®); + if ((reg & 0x0f) != 0x00) + pci_write_config_byte(dev, 0x09, reg&0xf0); + case ATA_16: + /* force per drive recovery and active timings + needed on ATA_33 and below chips */ + pci_read_config_byte(dev, 0x52, ®); + if (!(reg & 0x08)) + pci_write_config_byte(dev, 0x52, reg|0x08); + break; } return 0; @@ -546,10 +543,8 @@ static u8 __devinit ata66_sis5513(ide_hwif_t *hwif) return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) +static void __devinit init_hwif_sis5513(ide_hwif_t *hwif) { - u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; - hwif->set_pio_mode = &sis_set_pio_mode; hwif->set_dma_mode = &sis_set_dma_mode; @@ -557,27 +552,29 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) hwif->udma_filter = sis5513_ata133_udma_filter; hwif->cable_detect = ata66_sis5513; - - if (hwif->dma_base == 0) - return; - - hwif->ultra_mask = udma_rates[chipset_family]; } static const struct ide_port_info sis5513_chipset __devinitdata = { .name = "SIS5513", .init_chipset = init_chipset_sis5513, .init_hwif = init_hwif_sis5513, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, + .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, }; static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &sis5513_chipset); + struct ide_port_info d = sis5513_chipset; + u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; + + if (sis_find_family(dev) == 0) + return -ENOTSUPP; + + d.udma_mask = udma_rates[chipset_family]; + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id sis5513_pci_tbl[] = { diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 1f00251a4a8..40b3eeb2d84 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -332,8 +332,7 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = { #if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT) IDE_HFLAG_FORCE_LEGACY_IRQS | #endif - IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO5, }; diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 65f4c2ffaa5..eab557c45d1 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -27,9 +27,9 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) unsigned long flags; u16 master_data; u8 slave_data; - int control = 0; + int control = 0; /* ISP RTC */ - static const u8 timings[][2]= { + static const u8 timings[][2] = { { 0, 0 }, { 0, 0 }, { 1, 0 }, @@ -136,8 +136,8 @@ static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif) static const struct ide_port_info slc90e66_chipset __devinitdata = { .name = "SLC90E66", .init_hwif = init_hwif_slc90e66, - .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, + .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, + .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2_ONLY, .mwdma_mask = ATA_MWDMA12_ONLY, diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index 1e4a6262bce..c15435182e3 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -18,20 +18,20 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) u16 mode, scr = inw(scr_port); switch (speed) { - case XFER_UDMA_4: mode = 0x00c0; break; - case XFER_UDMA_3: mode = 0x00b0; break; - case XFER_UDMA_2: mode = 0x00a0; break; - case XFER_UDMA_1: mode = 0x0090; break; - case XFER_UDMA_0: mode = 0x0080; break; - case XFER_MW_DMA_2: mode = 0x0070; break; - case XFER_MW_DMA_1: mode = 0x0060; break; - case XFER_MW_DMA_0: mode = 0x0050; break; - case XFER_PIO_4: mode = 0x0400; break; - case XFER_PIO_3: mode = 0x0300; break; - case XFER_PIO_2: mode = 0x0200; break; - case XFER_PIO_1: mode = 0x0100; break; - case XFER_PIO_0: - default: mode = 0x0000; break; + case XFER_UDMA_4: mode = 0x00c0; break; + case XFER_UDMA_3: mode = 0x00b0; break; + case XFER_UDMA_2: mode = 0x00a0; break; + case XFER_UDMA_1: mode = 0x0090; break; + case XFER_UDMA_0: mode = 0x0080; break; + case XFER_MW_DMA_2: mode = 0x0070; break; + case XFER_MW_DMA_1: mode = 0x0060; break; + case XFER_MW_DMA_0: mode = 0x0050; break; + case XFER_PIO_4: mode = 0x0400; break; + case XFER_PIO_3: mode = 0x0300; break; + case XFER_PIO_2: mode = 0x0200; break; + case XFER_PIO_1: mode = 0x0100; break; + case XFER_PIO_0: + default: mode = 0x0000; break; } scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f; diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index a67d02a3f96..3316b197c77 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -97,7 +97,6 @@ static const struct ide_port_info triflex_device __devinitdata = { .name = "TRIFLEX", .init_hwif = init_hwif_triflex, .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, - .host_flags = IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index de750f7a43e..2b8f3a2837d 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -337,7 +337,6 @@ static const struct ide_port_info trm290_chipset __devinitdata = { IDE_HFLAG_TRUST_BIOS_FOR_DMA | #endif IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_BOOTABLE | IDE_HFLAG_NO_LBA48, }; diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 9004e752188..cff3cafedc4 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -429,11 +429,9 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = { .init_hwif = init_hwif_via82cxxx, .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | - IDE_HFLAG_PIO_NO_DOWNGRADE | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_IO_32BIT | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_IO_32BIT, .pio_mask = ATA_PIO5, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index a784a97ca7e..467656f06cc 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -36,6 +36,8 @@ #include <asm/machdep.h> #include <asm/irq.h> +#define DRV_NAME "ide-mpc8xx" + static int identify (volatile u8 *p); static void print_fixed (volatile u8 *p); static void print_funcid (int func); @@ -127,7 +129,7 @@ static int pcmcia_schlvl = PCMCIA_SCHLVL; * MPC8xx's internal PCMCIA interface */ #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) -static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) +static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) { unsigned long *p = hw->io_ports; int i; @@ -182,6 +184,13 @@ static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) pcmcia_phy_base, pcmcia_phy_end, pcmcia_phy_end - pcmcia_phy_base); + if (!request_mem_region(pcmcia_phy_base, + pcmcia_phy_end - pcmcia_phy_base, + DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base, pcmcia_phy_end-pcmcia_phy_base); @@ -236,7 +245,7 @@ static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) { printk ("No card in slot %c: PIPR=%08x\n", 'A' + _slot_, (u32) pcmp->pcmc_pipr); - return; /* No card in slot */ + return -ENODEV; /* No card in slot */ } check_ide_device (pcmcia_base); @@ -279,9 +288,6 @@ static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) } #endif /* CONFIG_IDE_8xx_PCCARD */ - ide_hwifs[data_port].pio_mask = ATA_PIO4; - ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode; - /* Enable Harddisk Interrupt, * and make it edge sensitive */ @@ -296,6 +302,8 @@ static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) /* Enable falling edge irq */ pcmp->pcmc_per = 0x100000 >> (16 * _slot_); #endif /* CONFIG_IDE_8xx_PCCARD */ + + return 0; } #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ @@ -304,7 +312,7 @@ static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) * MPC8xx's internal PCMCIA interface */ #if defined(CONFIG_IDE_EXT_DIRECT) -static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) +static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) { unsigned long *p = hw->io_ports; int i; @@ -327,7 +335,12 @@ static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) printk ("IDE phys mem : %08x...%08x (size %08x)\n", ide_phy_base, ide_phy_end, ide_phy_end - ide_phy_base); - + + if (!request_mem_region(ide_phy_base, 0x200, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + ide_base=(unsigned long)ioremap(ide_phy_base, ide_phy_end-ide_phy_base); @@ -357,15 +370,14 @@ static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) hw->irq = ioport_dsc[data_port].irq; hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - ide_hwifs[data_port].pio_mask = ATA_PIO4; - ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode; - /* Enable Harddisk Interrupt, * and make it edge sensitive */ /* (11-18) Set edge detect for irq, no wakeup from low power mode */ ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= (0x80000000 >> ioport_dsc[data_port].irq); + + return 0; } #endif /* CONFIG_IDE_8xx_DIRECT */ @@ -794,14 +806,28 @@ static int __init mpc8xx_ide_probe(void) #ifdef IDE0_BASE_OFFSET memset(&hw, 0, sizeof(hw)); - m8xx_ide_init_ports(&hw, 0); - ide_init_port_hw(&ide_hwifs[0], &hw); - idx[0] = 0; + if (!m8xx_ide_init_ports(&hw, 0)) { + ide_hwif_t *hwif = &ide_hwifs[0]; + + ide_init_port_hw(hwif, &hw); + hwif->mmio = 1; + hwif->pio_mask = ATA_PIO4; + hwif->set_pio_mode = m8xx_ide_set_pio_mode; + + idx[0] = 0; + } #ifdef IDE1_BASE_OFFSET memset(&hw, 0, sizeof(hw)); - m8xx_ide_init_ports(&hw, 1); - ide_init_port_hw(&ide_hwifs[1], &hw); - idx[1] = 1; + if (!m8xx_ide_init_ports(&hw, 1)) { + ide_hwif_t *mate = &ide_hwifs[1]; + + ide_init_port_hw(mate, &hw); + mate->mmio = 1; + mate->pio_mask = ATA_PIO4; + mate->set_pio_mode = m8xx_ide_set_pio_mode; + + idx[1] = 1; + } #endif #endif diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 88619b50d9e..177961edc43 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -79,8 +79,6 @@ typedef struct pmac_ide_hwif { } pmac_ide_hwif_t; -static pmac_ide_hwif_t pmac_ide[MAX_HWIFS]; - enum { controller_ohare, /* OHare based */ controller_heathrow, /* Heathrow/Paddington */ @@ -923,7 +921,6 @@ pmac_ide_do_resume(ide_hwif_t *hwif) static const struct ide_port_info pmac_port_info = { .chipset = ide_pmac, .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | - IDE_HFLAG_PIO_NO_DOWNGRADE | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ IDE_HFLAG_UNMASK_IRQS, @@ -1088,35 +1085,36 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) { void __iomem *base; unsigned long regbase; - int irq; ide_hwif_t *hwif; pmac_ide_hwif_t *pmif; - int i, rc; + int irq, rc; hw_regs_t hw; - i = 0; - while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0 - || pmac_ide[i].node != NULL)) - ++i; - if (i >= MAX_HWIFS) { + pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); + if (pmif == NULL) + return -ENOMEM; + + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n"); printk(KERN_ERR " %s\n", mdev->ofdev.node->full_name); - return -ENODEV; + rc = -ENODEV; + goto out_free_pmif; } - pmif = &pmac_ide[i]; - hwif = &ide_hwifs[i]; - if (macio_resource_count(mdev) == 0) { - printk(KERN_WARNING "ide%d: no address for %s\n", - i, mdev->ofdev.node->full_name); - return -ENXIO; + printk(KERN_WARNING "ide-pmac: no address for %s\n", + mdev->ofdev.node->full_name); + rc = -ENXIO; + goto out_free_pmif; } /* Request memory resource for IO ports */ if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) { - printk(KERN_ERR "ide%d: can't request mmio resource !\n", i); - return -EBUSY; + printk(KERN_ERR "ide-pmac: can't request MMIO resource for " + "%s!\n", mdev->ofdev.node->full_name); + rc = -EBUSY; + goto out_free_pmif; } /* XXX This is bogus. Should be fixed in the registry by checking @@ -1125,8 +1123,8 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) * where that happens though... */ if (macio_irq_count(mdev) == 0) { - printk(KERN_WARNING "ide%d: no intrs for device %s, using 13\n", - i, mdev->ofdev.node->full_name); + printk(KERN_WARNING "ide-pmac: no intrs for device %s, using " + "13\n", mdev->ofdev.node->full_name); irq = irq_create_mapping(NULL, 13); } else irq = macio_irq(mdev, 0); @@ -1144,7 +1142,9 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (macio_resource_count(mdev) >= 2) { if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) - printk(KERN_WARNING "ide%d: can't request DMA resource !\n", i); + printk(KERN_WARNING "ide-pmac: can't request DMA " + "resource for %s!\n", + mdev->ofdev.node->full_name); else pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else @@ -1166,11 +1166,15 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) iounmap(pmif->dma_regs); macio_release_resource(mdev, 1); } - memset(pmif, 0, sizeof(*pmif)); macio_release_resource(mdev, 0); + kfree(pmif); } return rc; + +out_free_pmif: + kfree(pmif); + return rc; } static int @@ -1215,7 +1219,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) pmac_ide_hwif_t *pmif; void __iomem *base; unsigned long rbase, rlen; - int i, rc; + int rc; hw_regs_t hw; np = pci_device_to_OF_node(pdev); @@ -1223,30 +1227,32 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n"); return -ENODEV; } - i = 0; - while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0 - || pmac_ide[i].node != NULL)) - ++i; - if (i >= MAX_HWIFS) { + + pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); + if (pmif == NULL) + return -ENOMEM; + + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n"); printk(KERN_ERR " %s\n", np->full_name); - return -ENODEV; + rc = -ENODEV; + goto out_free_pmif; } - pmif = &pmac_ide[i]; - hwif = &ide_hwifs[i]; - if (pci_enable_device(pdev)) { - printk(KERN_WARNING "ide%i: Can't enable PCI device for %s\n", - i, np->full_name); - return -ENXIO; + printk(KERN_WARNING "ide-pmac: Can't enable PCI device for " + "%s\n", np->full_name); + rc = -ENXIO; + goto out_free_pmif; } pci_set_master(pdev); if (pci_request_regions(pdev, "Kauai ATA")) { - printk(KERN_ERR "ide%d: Cannot obtain PCI resources for %s\n", - i, np->full_name); - return -ENXIO; + printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for " + "%s\n", np->full_name); + rc = -ENXIO; + goto out_free_pmif; } hwif->dev = &pdev->dev; @@ -1276,11 +1282,15 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) /* The inteface is released to the common IDE layer */ pci_set_drvdata(pdev, NULL); iounmap(base); - memset(pmif, 0, sizeof(*pmif)); pci_release_regions(pdev); + kfree(pmif); } return rc; + +out_free_pmif: + kfree(pmif); + return rc; } static int diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index f7ede0e4288..6302010fd8e 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -20,73 +20,6 @@ #include <asm/io.h> #include <asm/irq.h> - -/** - * ide_match_hwif - match a PCI IDE against an ide_hwif - * @io_base: I/O base of device - * @bootable: set if its bootable - * @name: name of device - * - * Match a PCI IDE port against an entry in ide_hwifs[], - * based on io_base port if possible. Return the matching hwif, - * or a new hwif. If we find an error (clashing, out of devices, etc) - * return NULL - * - * FIXME: we need to handle mmio matches here too - */ - -static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char *name) -{ - int h; - ide_hwif_t *hwif; - - /* - * Look for a hwif with matching io_base default value. - * If chipset is "ide_unknown", then claim that hwif slot. - * Otherwise, some other chipset has already claimed it.. :( - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_unknown) - return hwif; /* match */ - printk(KERN_ERR "%s: port 0x%04lx already claimed by %s\n", - name, io_base, hwif->name); - return NULL; /* already claimed */ - } - } - /* - * Okay, there is no hwif matching our io_base, - * so we'll just claim an unassigned slot. - * Give preference to claiming other slots before claiming ide0/ide1, - * just in case there's another interface yet-to-be-scanned - * which uses ports 1f0/170 (the ide0/ide1 defaults). - * - * Unless there is a bootable card that does not use the standard - * ports 1f0/170 (the ide0/ide1 defaults). The (bootable) flag. - */ - if (bootable) { - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } else { - for (h = 2; h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } - for (h = 0; h < 2 && h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", name); - return NULL; -} - /** * ide_setup_pci_baseregs - place a PCI IDE controller native * @dev: PCI device of interface to switch native @@ -94,13 +27,13 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char * * We attempt to place the PCI interface into PCI native mode. If * we succeed the BARs are ok and the controller is in PCI mode. - * Returns 0 on success or an errno code. + * Returns 0 on success or an errno code. * * FIXME: if we program the interface and then fail to set the BARS * we don't switch it back to legacy mode. Do we actually care ?? */ - -static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name) + +static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) { u8 progif = 0; @@ -207,7 +140,6 @@ void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) " PCI slot %s\n", d->name, dev->vendor, dev->device, dev->revision, pci_name(dev)); } - EXPORT_SYMBOL_GPL(ide_setup_pci_noise); @@ -220,7 +152,7 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); * but if that fails then we only need IO space. The PCI code should * have setup the proper resources for us already for controllers in * legacy mode. - * + * * Returns zero on success or an error code */ @@ -279,8 +211,8 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * Maybe the user deliberately *disabled* the device, * but we'll eventually ignore it again if no drives respond. */ - if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd|PCI_COMMAND_IO)) - { + if (ide_setup_pci_baseregs(dev, d->name) || + pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) { printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name); return -ENODEV; } @@ -301,26 +233,24 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * @d: IDE port info * @bar: BAR number * - * Checks if a BAR is configured and points to MMIO space. If so - * print an error and return an error code. Otherwise return 0 + * Checks if a BAR is configured and points to MMIO space. If so, + * return an error code. Otherwise return 0 */ -static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar) +static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, + int bar) { ulong flags = pci_resource_flags(dev, bar); - + /* Unconfigured ? */ if (!flags || pci_resource_len(dev, bar) == 0) return 0; - /* I/O space */ - if(flags & PCI_BASE_ADDRESS_IO_MASK) + /* I/O space */ + if (flags & IORESOURCE_IO) return 0; - + /* Bad */ - printk(KERN_ERR "%s: IO baseregs (BIOS) are reported " - "as MEM, report to " - "<andre@linux-ide.org>.\n", d->name); return -EINVAL; } @@ -344,14 +274,16 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, { unsigned long ctl = 0, base = 0; ide_hwif_t *hwif; - u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0; struct hw_regs_s hw; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { - /* Possibly we should fail if these checks report true */ - ide_pci_check_iomem(dev, d, 2*port); - ide_pci_check_iomem(dev, d, 2*port+1); - + if (ide_pci_check_iomem(dev, d, 2 * port) || + ide_pci_check_iomem(dev, d, 2 * port + 1)) { + printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported " + "as MEM for port %d!\n", d->name, port); + return NULL; + } + ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); if ((ctl && !base) || (base && !ctl)) { @@ -360,14 +292,18 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, return NULL; } } - if (!ctl) - { + if (!ctl) { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } - if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL) - return NULL; /* no room in ide_hwifs[] */ + + hwif = ide_find_port_slot(d); + if (hwif == NULL) { + printk(KERN_ERR "%s: too many IDE interfaces, no room in " + "table\n", d->name); + return NULL; + } memset(&hw, 0, sizeof(hw)); hw.irq = irq; @@ -407,9 +343,9 @@ void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) unsigned long dma_base = ide_get_or_set_dma_base(d, hwif); if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) { /* - * Set up BM-DMA capability + * Set up BM-DMA capability * (PnP BIOS should have done this) - */ + */ pci_set_master(dev); if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) { printk(KERN_ERR "%s: %s error updating PCICMD\n", @@ -514,7 +450,6 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int *(idx + port) = hwif->index; } } - EXPORT_SYMBOL_GPL(ide_pci_setup_ports); /* @@ -597,7 +532,6 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_device); int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, @@ -621,5 +555,4 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, out: return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_devices); |