aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig45
-rw-r--r--drivers/ide/atiixp.c2
-rw-r--r--drivers/ide/au1xxx-ide.c7
-rw-r--r--drivers/ide/hpt366.c65
-rw-r--r--drivers/ide/ide-acpi.c5
-rw-r--r--drivers/ide/ide-tape.c21
-rw-r--r--drivers/ide/ide_platform.c8
-rw-r--r--drivers/ide/tx4938ide.c2
8 files changed, 35 insertions, 120 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9a5d0aaac9d..98ccfeb3f5a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -7,50 +7,25 @@ config HAVE_IDE
bool
menuconfig IDE
- tristate "ATA/ATAPI/MFM/RLL support"
+ tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
depends on HAVE_IDE
depends on BLOCK
---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself doesn't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters from disk drives.
+ If you say Y here, your kernel will be able to manage ATA/(E)IDE and
+ ATAPI units. The most common cases are IDE hard drives and ATAPI
+ CD-ROM drives.
+
+ This subsystem is currently in maintenance mode with only bug fix
+ changes applied. Users of ATA hardware are encouraged to migrate to
+ the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
+ (experimental) drivers") which is more actively maintained.
To compile this driver as a module, choose M here: the
module will be called ide-core.
For further information, please read <file:Documentation/ide/ide.txt>.
- If unsure, say Y.
+ If unsure, say N.
if IDE
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index 6396c3ad325..837322b10a4 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -177,7 +177,7 @@ static const struct pci_device_id atiixp_pci_tbl[] = {
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 58121bd6c11..87cef0c440a 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -532,14 +532,13 @@ static int au_ide_probe(struct platform_device *dev)
goto out;
}
- if (!request_mem_region(res->start, res->end - res->start + 1,
- dev->name)) {
+ if (!request_mem_region(res->start, resource_size(res), dev->name)) {
pr_debug("%s: request_mem_region failed\n", DRV_NAME);
ret = -EBUSY;
goto out;
}
- ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
+ ahwif->regbase = (u32)ioremap(res->start, resource_size(res));
if (ahwif->regbase == 0) {
ret = -ENOMEM;
goto out;
@@ -575,7 +574,7 @@ static int au_ide_remove(struct platform_device *dev)
iounmap((void *)ahwif->regbase);
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
return 0;
}
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 7ce68ef6b90..4d90ac2dbb1 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -297,68 +297,6 @@ static u32 twenty_five_base_hpt36x[] = {
/* XFER_PIO_0 */ 0xc0d08585
};
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
- /* XFER_UDMA_5 */ 0x12446231,
- /* XFER_UDMA_4 */ 0x12446231,
- /* XFER_UDMA_3 */ 0x126c6231,
- /* XFER_UDMA_2 */ 0x12486231,
- /* XFER_UDMA_1 */ 0x124c6233,
- /* XFER_UDMA_0 */ 0x12506297,
-
- /* XFER_MW_DMA_2 */ 0x22406c31,
- /* XFER_MW_DMA_1 */ 0x22406c33,
- /* XFER_MW_DMA_0 */ 0x22406c97,
-
- /* XFER_PIO_4 */ 0x06414e31,
- /* XFER_PIO_3 */ 0x06414e42,
- /* XFER_PIO_2 */ 0x06414e53,
- /* XFER_PIO_1 */ 0x06814e93,
- /* XFER_PIO_0 */ 0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12848242,
- /* XFER_UDMA_5 */ 0x12848242,
- /* XFER_UDMA_4 */ 0x12ac8242,
- /* XFER_UDMA_3 */ 0x128c8242,
- /* XFER_UDMA_2 */ 0x120c8242,
- /* XFER_UDMA_1 */ 0x12148254,
- /* XFER_UDMA_0 */ 0x121882ea,
-
- /* XFER_MW_DMA_2 */ 0x22808242,
- /* XFER_MW_DMA_1 */ 0x22808254,
- /* XFER_MW_DMA_0 */ 0x228082ea,
-
- /* XFER_PIO_4 */ 0x0a81f442,
- /* XFER_PIO_3 */ 0x0a81f443,
- /* XFER_PIO_2 */ 0x0a81f454,
- /* XFER_PIO_1 */ 0x0ac1f465,
- /* XFER_PIO_0 */ 0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1c869c62,
- /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */
- /* XFER_UDMA_4 */ 0x1c8a9c62,
- /* XFER_UDMA_3 */ 0x1c8e9c62,
- /* XFER_UDMA_2 */ 0x1c929c62,
- /* XFER_UDMA_1 */ 0x1c9a9c62,
- /* XFER_UDMA_0 */ 0x1c829c62,
-
- /* XFER_MW_DMA_2 */ 0x2c829c62,
- /* XFER_MW_DMA_1 */ 0x2c829c66,
- /* XFER_MW_DMA_0 */ 0x2c829d2e,
-
- /* XFER_PIO_4 */ 0x0c829c62,
- /* XFER_PIO_3 */ 0x0c829c84,
- /* XFER_PIO_2 */ 0x0c829ca6,
- /* XFER_PIO_1 */ 0x0d029d26,
- /* XFER_PIO_0 */ 0x0d029d5e
-};
-#else
/*
* The following are the new timing tables with PIO mode data/taskfile transfer
* overclocking fixed...
@@ -424,16 +362,13 @@ static u32 sixty_six_base_hpt37x[] = {
/* XFER_PIO_1 */ 0x0d02ff26,
/* XFER_PIO_0 */ 0x0d42ff7f
};
-#endif
-#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT371_ALLOW_ATA133_6 1
#define HPT302_ALLOW_ATA133_6 1
#define HPT372_ALLOW_ATA133_6 1
#define HPT370_ALLOW_ATA100_5 0
#define HPT366_ALLOW_ATA66_4 1
#define HPT366_ALLOW_ATA66_3 1
-#define HPT366_MAX_DEVS 8
/* Supported ATA clock frequencies */
enum ata_clock {
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index c509c991646..c0cf45a11b9 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -114,8 +114,6 @@ static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
unsigned int bus, devnum, func;
acpi_integer addr;
acpi_handle dev_handle;
- struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
- .pointer = NULL};
acpi_status status;
struct acpi_device_info *dinfo = NULL;
int ret = -ENODEV;
@@ -134,12 +132,11 @@ static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
goto err;
}
- status = acpi_get_object_info(dev_handle, &buffer);
+ status = acpi_get_object_info(dev_handle, &dinfo);
if (ACPI_FAILURE(status)) {
DEBPRINT("get_object_info for device failed\n");
goto err;
}
- dinfo = buffer.pointer;
if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
dinfo->address == addr) {
*pcidevfn = addr;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 58fc920d5c3..6a0e6254216 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -221,6 +221,8 @@ typedef struct ide_tape_obj {
static DEFINE_MUTEX(idetape_ref_mutex);
+static DEFINE_MUTEX(idetape_chrdev_mutex);
+
static struct class *idetape_sysfs_class;
static void ide_tape_release(struct device *);
@@ -1457,10 +1459,11 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
if (i >= MAX_HWIFS * MAX_DRIVES)
return -ENXIO;
- lock_kernel();
+ mutex_lock(&idetape_chrdev_mutex);
+
tape = ide_tape_get(NULL, true, i);
if (!tape) {
- unlock_kernel();
+ mutex_unlock(&idetape_chrdev_mutex);
return -ENXIO;
}
@@ -1519,12 +1522,15 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
tape->door_locked = DOOR_LOCKED;
}
}
- unlock_kernel();
+ mutex_unlock(&idetape_chrdev_mutex);
+
return 0;
out_put_tape:
ide_tape_put(tape);
- unlock_kernel();
+
+ mutex_unlock(&idetape_chrdev_mutex);
+
return retval;
}
@@ -1551,7 +1557,8 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
ide_drive_t *drive = tape->drive;
unsigned int minor = iminor(inode);
- lock_kernel();
+ mutex_lock(&idetape_chrdev_mutex);
+
tape = drive->driver_data;
ide_debug_log(IDE_DBG_FUNC, "enter");
@@ -1575,7 +1582,9 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
}
clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
ide_tape_put(tape);
- unlock_kernel();
+
+ mutex_unlock(&idetape_chrdev_mutex);
+
return 0;
}
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index b579fbe8837..42965b3e30b 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -81,14 +81,14 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
if (mmio) {
base = devm_ioremap(&pdev->dev,
- res_base->start, res_base->end - res_base->start + 1);
+ res_base->start, resource_size(res_base));
alt_base = devm_ioremap(&pdev->dev,
- res_alt->start, res_alt->end - res_alt->start + 1);
+ res_alt->start, resource_size(res_alt));
} else {
base = devm_ioport_map(&pdev->dev,
- res_base->start, res_base->end - res_base->start + 1);
+ res_base->start, resource_size(res_base));
alt_base = devm_ioport_map(&pdev->dev,
- res_alt->start, res_alt->end - res_alt->start + 1);
+ res_alt->start, resource_size(res_alt));
}
memset(&hw, 0, sizeof(hw));
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index ea89fddeed9..fd59c0d235b 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -146,7 +146,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev)
return -ENODEV;
if (!devm_request_mem_region(&pdev->dev, res->start,
- res->end - res->start + 1, "tx4938ide"))
+ resource_size(res), "tx4938ide"))
return -EBUSY;
mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
8 << pdata->ioport_shift);
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 08:40:48 +0000