diff options
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_iba6120.c')
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_iba6120.c | 1264 |
1 files changed, 1264 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c new file mode 100644 index 00000000000..d86516d23df --- /dev/null +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -0,0 +1,1264 @@ +/* + * Copyright (c) 2006 QLogic, Inc. All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +/* + * This file contains all of the code that is specific to the + * InfiniPath PCIe chip. + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> + + +#include "ipath_kernel.h" +#include "ipath_registers.h" + +/* + * This file contains all the chip-specific register information and + * access functions for the QLogic InfiniPath PCI-Express chip. + * + * This lists the InfiniPath registers, in the actual chip layout. + * This structure should never be directly accessed. + */ +struct _infinipath_do_not_use_kernel_regs { + unsigned long long Revision; + unsigned long long Control; + unsigned long long PageAlign; + unsigned long long PortCnt; + unsigned long long DebugPortSelect; + unsigned long long Reserved0; + unsigned long long SendRegBase; + unsigned long long UserRegBase; + unsigned long long CounterRegBase; + unsigned long long Scratch; + unsigned long long Reserved1; + unsigned long long Reserved2; + unsigned long long IntBlocked; + unsigned long long IntMask; + unsigned long long IntStatus; + unsigned long long IntClear; + unsigned long long ErrorMask; + unsigned long long ErrorStatus; + unsigned long long ErrorClear; + unsigned long long HwErrMask; + unsigned long long HwErrStatus; + unsigned long long HwErrClear; + unsigned long long HwDiagCtrl; + unsigned long long MDIO; + unsigned long long IBCStatus; + unsigned long long IBCCtrl; + unsigned long long ExtStatus; + unsigned long long ExtCtrl; + unsigned long long GPIOOut; + unsigned long long GPIOMask; + unsigned long long GPIOStatus; + unsigned long long GPIOClear; + unsigned long long RcvCtrl; + unsigned long long RcvBTHQP; + unsigned long long RcvHdrSize; + unsigned long long RcvHdrCnt; + unsigned long long RcvHdrEntSize; + unsigned long long RcvTIDBase; + unsigned long long RcvTIDCnt; + unsigned long long RcvEgrBase; + unsigned long long RcvEgrCnt; + unsigned long long RcvBufBase; + unsigned long long RcvBufSize; + unsigned long long RxIntMemBase; + unsigned long long RxIntMemSize; + unsigned long long RcvPartitionKey; + unsigned long long Reserved3; + unsigned long long RcvPktLEDCnt; + unsigned long long Reserved4[8]; + unsigned long long SendCtrl; + unsigned long long SendPIOBufBase; + unsigned long long SendPIOSize; + unsigned long long SendPIOBufCnt; + unsigned long long SendPIOAvailAddr; + unsigned long long TxIntMemBase; + unsigned long long TxIntMemSize; + unsigned long long Reserved5; + unsigned long long PCIeRBufTestReg0; + unsigned long long PCIeRBufTestReg1; + unsigned long long Reserved51[6]; + unsigned long long SendBufferError; + unsigned long long SendBufferErrorCONT1; + unsigned long long Reserved6SBE[6]; + unsigned long long RcvHdrAddr0; + unsigned long long RcvHdrAddr1; + unsigned long long RcvHdrAddr2; + unsigned long long RcvHdrAddr3; + unsigned long long RcvHdrAddr4; + unsigned long long Reserved7RHA[11]; + unsigned long long RcvHdrTailAddr0; + unsigned long long RcvHdrTailAddr1; + unsigned long long RcvHdrTailAddr2; + unsigned long long RcvHdrTailAddr3; + unsigned long long RcvHdrTailAddr4; + unsigned long long Reserved8RHTA[11]; + unsigned long long Reserved9SW[8]; + unsigned long long SerdesConfig0; + unsigned long long SerdesConfig1; + unsigned long long SerdesStatus; + unsigned long long XGXSConfig; + unsigned long long IBPLLCfg; + unsigned long long Reserved10SW2[3]; + unsigned long long PCIEQ0SerdesConfig0; + unsigned long long PCIEQ0SerdesConfig1; + unsigned long long PCIEQ0SerdesStatus; + unsigned long long Reserved11; + unsigned long long PCIEQ1SerdesConfig0; + unsigned long long PCIEQ1SerdesConfig1; + unsigned long long PCIEQ1SerdesStatus; + unsigned long long Reserved12; +}; + +#define IPATH_KREG_OFFSET(field) (offsetof(struct \ + _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) +#define IPATH_CREG_OFFSET(field) (offsetof( \ + struct infinipath_counters, field) / sizeof(u64)) + +static const struct ipath_kregs ipath_pe_kregs = { + .kr_control = IPATH_KREG_OFFSET(Control), + .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase), + .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect), + .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear), + .kr_errormask = IPATH_KREG_OFFSET(ErrorMask), + .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus), + .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl), + .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus), + .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear), + .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask), + .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut), + .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus), + .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl), + .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear), + .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask), + .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus), + .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl), + .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus), + .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked), + .kr_intclear = IPATH_KREG_OFFSET(IntClear), + .kr_intmask = IPATH_KREG_OFFSET(IntMask), + .kr_intstatus = IPATH_KREG_OFFSET(IntStatus), + .kr_mdio = IPATH_KREG_OFFSET(MDIO), + .kr_pagealign = IPATH_KREG_OFFSET(PageAlign), + .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey), + .kr_portcnt = IPATH_KREG_OFFSET(PortCnt), + .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP), + .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase), + .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize), + .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl), + .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase), + .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt), + .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt), + .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize), + .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize), + .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase), + .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize), + .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase), + .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt), + .kr_revision = IPATH_KREG_OFFSET(Revision), + .kr_scratch = IPATH_KREG_OFFSET(Scratch), + .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError), + .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl), + .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr), + .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase), + .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt), + .kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize), + .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase), + .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase), + .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize), + .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase), + .kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0), + .kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1), + .kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus), + .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig), + .kr_ibpllcfg = IPATH_KREG_OFFSET(IBPLLCfg), + + /* + * These should not be used directly via ipath_read_kreg64(), + * use them with ipath_read_kreg64_port() + */ + .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0), + .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0), + + /* The rcvpktled register controls one of the debug port signals, so + * a packet activity LED can be connected to it. */ + .kr_rcvpktledcnt = IPATH_KREG_OFFSET(RcvPktLEDCnt), + .kr_pcierbuftestreg0 = IPATH_KREG_OFFSET(PCIeRBufTestReg0), + .kr_pcierbuftestreg1 = IPATH_KREG_OFFSET(PCIeRBufTestReg1), + .kr_pcieq0serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig0), + .kr_pcieq0serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig1), + .kr_pcieq0serdesstatus = IPATH_KREG_OFFSET(PCIEQ0SerdesStatus), + .kr_pcieq1serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig0), + .kr_pcieq1serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig1), + .kr_pcieq1serdesstatus = IPATH_KREG_OFFSET(PCIEQ1SerdesStatus) +}; + +static const struct ipath_cregs ipath_pe_cregs = { + .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt), + .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt), + .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt), + .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt), + .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt), + .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt), + .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt), + .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt), + .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt), + .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt), + .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt), + .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt), + .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt), + .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt), + .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt), + .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt), + .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt), + .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt), + .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt), + .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt), + .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt), + .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt), + .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt), + .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt), + .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt), + .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt), + .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt), + .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt), + .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt), + .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt), + .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt), + .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt), + .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt) +}; + +/* kr_intstatus, kr_intclear, kr_intmask bits */ +#define INFINIPATH_I_RCVURG_MASK 0x1F +#define INFINIPATH_I_RCVAVAIL_MASK 0x1F + +/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */ +#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK 0x000000000000003fULL +#define INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT 0 +#define INFINIPATH_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL +#define INFINIPATH_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL +#define INFINIPATH_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL +#define INFINIPATH_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL +#define INFINIPATH_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL +#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL +#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL +#define INFINIPATH_HWE_PCIE1PLLFAILED 0x0400000000000000ULL +#define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL +#define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL + +/* kr_extstatus bits */ +#define INFINIPATH_EXTS_FREQSEL 0x2 +#define INFINIPATH_EXTS_SERDESSEL 0x4 +#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000 +#define INFINIPATH_EXTS_MEMBIST_FOUND 0x0000000000008000 + +#define _IPATH_GPIO_SDA_NUM 1 +#define _IPATH_GPIO_SCL_NUM 0 + +#define IPATH_GPIO_SDA (1ULL << \ + (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) +#define IPATH_GPIO_SCL (1ULL << \ + (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) + +/** + * ipath_pe_handle_hwerrors - display hardware errors. + * @dd: the infinipath device + * @msg: the output buffer + * @msgl: the size of the output buffer + * + * Use same msg buffer as regular errors to avoid excessive stack + * use. Most hardware errors are catastrophic, but for right now, + * we'll print them and continue. We reuse the same message buffer as + * ipath_handle_errors() to avoid excessive stack usage. + */ +static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, + size_t msgl) +{ + ipath_err_t hwerrs; + u32 bits, ctrl; + int isfatal = 0; + char bitsmsg[64]; + + hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus); + if (!hwerrs) { + /* + * better than printing cofusing messages + * This seems to be related to clearing the crc error, or + * the pll error during init. + */ + ipath_cdbg(VERBOSE, "Called but no hardware errors set\n"); + return; + } else if (hwerrs == ~0ULL) { + ipath_dev_err(dd, "Read of hardware error status failed " + "(all bits set); ignoring\n"); + return; + } + ipath_stats.sps_hwerrs++; + + /* Always clear the error status register, except MEMBISTFAIL, + * regardless of whether we continue or stop using the chip. + * We want that set so we know it failed, even across driver reload. + * We'll still ignore it in the hwerrmask. We do this partly for + * diagnostics, but also for support */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, + hwerrs&~INFINIPATH_HWE_MEMBISTFAILED); + + hwerrs &= dd->ipath_hwerrmask; + + /* + * make sure we get this much out, unless told to be quiet, + * or it's occurred within the last 5 seconds + */ + if ((hwerrs & ~dd->ipath_lasthwerror) || + (ipath_debug & __IPATH_VERBDBG)) + dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx " + "(cleared)\n", (unsigned long long) hwerrs); + dd->ipath_lasthwerror |= hwerrs; + + if (hwerrs & ~infinipath_hwe_bitsextant) + ipath_dev_err(dd, "hwerror interrupt with unknown errors " + "%llx set\n", (unsigned long long) + (hwerrs & ~infinipath_hwe_bitsextant)); + + ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control); + if (ctrl & INFINIPATH_C_FREEZEMODE) { + if (hwerrs) { + /* + * if any set that we aren't ignoring only make the + * complaint once, in case it's stuck or recurring, + * and we get here multiple times + */ + if (dd->ipath_flags & IPATH_INITTED) { + ipath_dev_err(dd, "Fatal Hardware Error (freeze " + "mode), no longer usable, SN %.16s\n", + dd->ipath_serial); + isfatal = 1; + } + /* + * Mark as having had an error for driver, and also + * for /sys and status word mapped to user programs. + * This marks unit as not usable, until reset + */ + *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY; + *dd->ipath_statusp |= IPATH_STATUS_HWERROR; + dd->ipath_flags &= ~IPATH_INITTED; + } else { + ipath_dbg("Clearing freezemode on ignored hardware " + "error\n"); + ctrl &= ~INFINIPATH_C_FREEZEMODE; + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + ctrl); + } + } + + *msg = '\0'; + + if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) { + strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]", + msgl); + /* ignore from now on, so disable until driver reloaded */ + *dd->ipath_statusp |= IPATH_STATUS_HWERROR; + dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED; + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, + dd->ipath_hwerrmask); + } + if (hwerrs & (INFINIPATH_HWE_RXEMEMPARITYERR_MASK + << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)) { + bits = (u32) ((hwerrs >> + INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) & + INFINIPATH_HWE_RXEMEMPARITYERR_MASK); + snprintf(bitsmsg, sizeof bitsmsg, "[RXE Parity Errs %x] ", + bits); + strlcat(msg, bitsmsg, msgl); + } + if (hwerrs & (INFINIPATH_HWE_TXEMEMPARITYERR_MASK + << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) { + bits = (u32) ((hwerrs >> + INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) & + INFINIPATH_HWE_TXEMEMPARITYERR_MASK); + snprintf(bitsmsg, sizeof bitsmsg, "[TXE Parity Errs %x] ", + bits); + strlcat(msg, bitsmsg, msgl); + } + if (hwerrs & (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK + << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT)) { + bits = (u32) ((hwerrs >> + INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) & + INFINIPATH_HWE_PCIEMEMPARITYERR_MASK); + snprintf(bitsmsg, sizeof bitsmsg, + "[PCIe Mem Parity Errs %x] ", bits); + strlcat(msg, bitsmsg, msgl); + } + if (hwerrs & INFINIPATH_HWE_IBCBUSTOSPCPARITYERR) + strlcat(msg, "[IB2IPATH Parity]", msgl); + if (hwerrs & INFINIPATH_HWE_IBCBUSFRSPCPARITYERR) + strlcat(msg, "[IPATH2IB Parity]", msgl); + +#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \ + INFINIPATH_HWE_COREPLL_RFSLIP ) + + if (hwerrs & _IPATH_PLL_FAIL) { + snprintf(bitsmsg, sizeof bitsmsg, + "[PLL failed (%llx), InfiniPath hardware unusable]", + (unsigned long long) hwerrs & _IPATH_PLL_FAIL); + strlcat(msg, bitsmsg, msgl); + /* ignore from now on, so disable until driver reloaded */ + dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL); + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, + dd->ipath_hwerrmask); + } + + if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) { + /* + * If it occurs, it is left masked since the eternal + * interface is unused + */ + dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED; + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, + dd->ipath_hwerrmask); + } + + if (hwerrs & INFINIPATH_HWE_PCIEPOISONEDTLP) + strlcat(msg, "[PCIe Poisoned TLP]", msgl); + if (hwerrs & INFINIPATH_HWE_PCIECPLTIMEOUT) + strlcat(msg, "[PCIe completion timeout]", msgl); + + /* + * In practice, it's unlikely wthat we'll see PCIe PLL, or bus + * parity or memory parity error failures, because most likely we + * won't be able to talk to the core of the chip. Nonetheless, we + * might see them, if they are in parts of the PCIe core that aren't + * essential. + */ + if (hwerrs & INFINIPATH_HWE_PCIE1PLLFAILED) + strlcat(msg, "[PCIePLL1]", msgl); + if (hwerrs & INFINIPATH_HWE_PCIE0PLLFAILED) + strlcat(msg, "[PCIePLL0]", msgl); + if (hwerrs & INFINIPATH_HWE_PCIEBUSPARITYXTLH) + strlcat(msg, "[PCIe XTLH core parity]", msgl); + if (hwerrs & INFINIPATH_HWE_PCIEBUSPARITYXADM) + strlcat(msg, "[PCIe ADM TX core parity]", msgl); + if (hwerrs & INFINIPATH_HWE_PCIEBUSPARITYRADM) + strlcat(msg, "[PCIe ADM RX core parity]", msgl); + + if (hwerrs & INFINIPATH_HWE_RXDSYNCMEMPARITYERR) + strlcat(msg, "[Rx Dsync]", msgl); + if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) + strlcat(msg, "[SerDes PLL]", msgl); + + ipath_dev_err(dd, "%s hardware error\n", msg); + if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg) { + /* + * for /sys status file ; if no trailing } is copied, we'll + * know it was truncated. + */ + snprintf(dd->ipath_freezemsg, dd->ipath_freezelen, + "{%s}", msg); + } +} + +/** + * ipath_pe_boardname - fill in the board name + * @dd: the infinipath device + * @name: the output buffer + * @namelen: the size of the output buffer + * + * info is based on the board revision register + */ +static int ipath_pe_boardname(struct ipath_devdata *dd, char *name, + size_t namelen) +{ + char *n = NULL; + u8 boardrev = dd->ipath_boardrev; + int ret; + + switch (boardrev) { + case 0: + n = "InfiniPath_Emulation"; + break; + case 1: + n = "InfiniPath_QLE7140-Bringup"; + break; + case 2: + n = "InfiniPath_QLE7140"; + break; + case 3: + n = "InfiniPath_QMI7140"; + break; + case 4: + n = "InfiniPath_QEM7140"; + break; + case 5: + n = "InfiniPath_QMH7140"; + break; + default: + ipath_dev_err(dd, + "Don't yet know about board with ID %u\n", + boardrev); + snprintf(name, namelen, "Unknown_InfiniPath_PCIe_%u", + boardrev); + break; + } + if (n) + snprintf(name, namelen, "%s", n); + + if (dd->ipath_majrev != 4 || !dd->ipath_minrev || dd->ipath_minrev>2) { + ipath_dev_err(dd, "Unsupported InfiniPath hardware revision %u.%u!\n", + dd->ipath_majrev, dd->ipath_minrev); + ret = 1; + } else + ret = 0; + + return ret; +} + +/** + * ipath_pe_init_hwerrors - enable hardware errors + * @dd: the infinipath device + * + * now that we have finished initializing everything that might reasonably + * cause a hardware error, and cleared those errors bits as they occur, + * we can enable hardware errors in the mask (potentially enabling + * freeze mode), and enable hardware errors as errors (along with + * everything else) in errormask + */ +static void ipath_pe_init_hwerrors(struct ipath_devdata *dd) +{ + ipath_err_t val; + u64 extsval; + + extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus); + + if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST)) + ipath_dev_err(dd, "MemBIST did not complete!\n"); + + val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */ + + if (!dd->ipath_boardrev) // no PLL for Emulator + val &= ~INFINIPATH_HWE_SERDESPLLFAILED; + + /* workaround bug 9460 in internal interface bus parity checking */ + val &= ~INFINIPATH_HWE_PCIEBUSPARITYRADM; + + dd->ipath_hwerrmask = val; +} + +/** + * ipath_pe_bringup_serdes - bring up the serdes + * @dd: the infinipath device + */ +static int ipath_pe_bringup_serdes(struct ipath_devdata *dd) +{ + u64 val, tmp, config1; + int ret = 0, change = 0; + + ipath_dbg("Trying to bringup serdes\n"); + + if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) & + INFINIPATH_HWE_SERDESPLLFAILED) { + ipath_dbg("At start, serdes PLL failed bit set " + "in hwerrstatus, clearing and continuing\n"); + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, + INFINIPATH_HWE_SERDESPLLFAILED); + } + + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0); + config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1); + + ipath_cdbg(VERBOSE, "SerDes status config0=%llx config1=%llx, " + "xgxsconfig %llx\n", (unsigned long long) val, + (unsigned long long) config1, (unsigned long long) + ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); + + /* + * Force reset on, also set rxdetect enable. Must do before reading + * serdesstatus at least for simulation, or some of the bits in + * serdes status will come back as undefined and cause simulation + * failures + */ + val |= INFINIPATH_SERDC0_RESET_PLL | INFINIPATH_SERDC0_RXDETECT_EN + | INFINIPATH_SERDC0_L1PWR_DN; + ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); + /* be sure chip saw it */ + tmp = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + udelay(5); /* need pll reset set at least for a bit */ + /* + * after PLL is reset, set the per-lane Resets and TxIdle and + * clear the PLL reset and rxdetect (to get falling edge). + * Leave L1PWR bits set (permanently) + */ + val &= ~(INFINIPATH_SERDC0_RXDETECT_EN | INFINIPATH_SERDC0_RESET_PLL + | INFINIPATH_SERDC0_L1PWR_DN); + val |= INFINIPATH_SERDC0_RESET_MASK | INFINIPATH_SERDC0_TXIDLE; + ipath_cdbg(VERBOSE, "Clearing pll reset and setting lane resets " + "and txidle (%llx)\n", (unsigned long long) val); + ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); + /* be sure chip saw it */ + tmp = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + /* need PLL reset clear for at least 11 usec before lane + * resets cleared; give it a few more to be sure */ + udelay(15); + val &= ~(INFINIPATH_SERDC0_RESET_MASK | INFINIPATH_SERDC0_TXIDLE); + + ipath_cdbg(VERBOSE, "Clearing lane resets and txidle " + "(writing %llx)\n", (unsigned long long) val); + ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); + /* be sure chip saw it */ + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); + if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) & + INFINIPATH_XGXS_MDIOADDR_MASK) != 3) { + val &= + ~(INFINIPATH_XGXS_MDIOADDR_MASK << + INFINIPATH_XGXS_MDIOADDR_SHIFT); + /* MDIO address 3 */ + val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT; + change = 1; + } + if (val & INFINIPATH_XGXS_RESET) { + val &= ~INFINIPATH_XGXS_RESET; + change = 1; + } + if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) & + INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) { + /* need to compensate for Tx inversion in partner */ + val &= ~(INFINIPATH_XGXS_RX_POL_MASK << + INFINIPATH_XGXS_RX_POL_SHIFT); + val |= dd->ipath_rx_pol_inv << + INFINIPATH_XGXS_RX_POL_SHIFT; + change = 1; + } + if (change) + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); + + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0); + + /* clear current and de-emphasis bits */ + config1 &= ~0x0ffffffff00ULL; + /* set current to 20ma */ + config1 |= 0x00000000000ULL; + /* set de-emphasis to -5.68dB */ + config1 |= 0x0cccc000000ULL; + ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1); + + ipath_cdbg(VERBOSE, "done: SerDes status config0=%llx " + "config1=%llx, sstatus=%llx xgxs=%llx\n", + (unsigned long long) val, (unsigned long long) config1, + (unsigned long long) + ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus), + (unsigned long long) + ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); + + if (!ipath_waitfor_mdio_cmdready(dd)) { + ipath_write_kreg( + dd, dd->ipath_kregs->kr_mdio, + ipath_mdio_req(IPATH_MDIO_CMD_READ, 31, + IPATH_MDIO_CTRL_XGXS_REG_8, 0)); + if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio, + IPATH_MDIO_DATAVALID, &val)) + ipath_dbg("Never got MDIO data for XGXS " + "status read\n"); + else + ipath_cdbg(VERBOSE, "MDIO Read reg8, " + "'bank' 31 %x\n", (u32) val); + } else + ipath_dbg("Never got MDIO cmdready for XGXS status read\n"); + + return ret; +} + +/** + * ipath_pe_quiet_serdes - set serdes to txidle + * @dd: the infinipath device + * Called when driver is being unloaded + */ +static void ipath_pe_quiet_serdes(struct ipath_devdata *dd) +{ + u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0); + + val |= INFINIPATH_SERDC0_TXIDLE; + ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n", + (unsigned long long) val); + ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); +} + +/* this is not yet needed on this chip, so just return 0. */ +static int ipath_pe_intconfig(struct ipath_devdata *dd) +{ + return 0; +} + +/** + * ipath_setup_pe_setextled - set the state of the two external LEDs + * @dd: the infinipath device + * @lst: the L state + * @ltst: the LT state + + * These LEDs indicate the physical and logical state of IB link. + * For this chip (at least with recommended board pinouts), LED1 + * is Yellow (logical state) and LED2 is Green (physical state), + * + * Note: We try to match the Mellanox HCA LED behavior as best + * we can. Green indicates physical link state is OK (something is + * plugged in, and we can train). + * Amber indicates the link is logically up (ACTIVE). + * Mellanox further blinks the amber LED to indicate data packet + * activity, but we have no hardware support for that, so it would + * require waking up every 10-20 msecs and checking the counters + * on the chip, and then turning the LED off if appropriate. That's + * visible overhead, so not something we will do. + * + */ +static void ipath_setup_pe_setextled(struct ipath_devdata *dd, u64 lst, + u64 ltst) +{ + u64 extctl; + + /* the diags use the LED to indicate diag info, so we leave + * the external LED alone when the diags are running */ + if (ipath_diag_inuse) + return; + + extctl = dd->ipath_extctrl & ~(INFINIPATH_EXTC_LED1PRIPORT_ON | + INFINIPATH_EXTC_LED2PRIPORT_ON); + + if (ltst & INFINIPATH_IBCS_LT_STATE_LINKUP) + extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON; + if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE) + extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON; + dd->ipath_extctrl = extctl; + ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl); +} + +/** + * ipath_setup_pe_cleanup - clean up any per-chip chip-specific stuff + * @dd: the infinipath device + * + * This is called during driver unload. + * We do the pci_disable_msi here, not in generic code, because it + * isn't used for the HT chips. If we do end up needing pci_enable_msi + * at some point in the future for HT, we'll move the call back + * into the main init_one code. + */ +static void ipath_setup_pe_cleanup(struct ipath_devdata *dd) +{ + dd->ipath_msi_lo = 0; /* just in case unload fails */ + pci_disable_msi(dd->pcidev); +} + +/** + * ipath_setup_pe_config - setup PCIe config related stuff + * @dd: the infinipath device + * @pdev: the PCI device + * + * The pci_enable_msi() call will fail on systems with MSI quirks + * such as those with AMD8131, even if the device of interest is not + * attached to that device, (in the 2.6.13 - 2.6.15 kernels, at least, fixed + * late in 2.6.16). + * All that can be done is to edit the kernel source to remove the quirk + * check until that is fixed. + * We do not need to call enable_msi() for our HyperTransport chip, + * even though it uses MSI, and we want to avoid the quirk warning, so + * So we call enable_msi only for PCIe. If we do end up needing + * pci_enable_msi at some point in the future for HT, we'll move the + * call back into the main init_one code. + * We save the msi lo and hi values, so we can restore them after + * chip reset (the kernel PCI infrastructure doesn't yet handle that + * correctly). + */ +static int ipath_setup_pe_config(struct ipath_devdata *dd, + struct pci_dev *pdev) +{ + int pos, ret; + + dd->ipath_msi_lo = 0; /* used as a flag during reset processing */ + ret = pci_enable_msi(dd->pcidev); + if (ret) + ipath_dev_err(dd, "pci_enable_msi failed: %d, " + "interrupts may not work\n", ret); + /* continue even if it fails, we may still be OK... */ + + if ((pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) { + u16 control; + pci_read_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO, + &dd->ipath_msi_lo); + pci_read_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI, + &dd->ipath_msi_hi); + pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, + &control); + /* now save the data (vector) info */ + pci_read_config_word(dd->pcidev, + pos + ((control & PCI_MSI_FLAGS_64BIT) + ? 12 : 8), + &dd->ipath_msi_data); + ipath_cdbg(VERBOSE, "Read msi data 0x%x from config offset " + "0x%x, control=0x%x\n", dd->ipath_msi_data, + pos + ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8), + control); + /* we save the cachelinesize also, although it doesn't + * really matter */ + pci_read_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, + &dd->ipath_pci_cacheline); + } else + ipath_dev_err(dd, "Can't find MSI capability, " + "can't save MSI settings for reset\n"); + if ((pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP))) { + u16 linkstat; + pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA, + &linkstat); + linkstat >>= 4; + linkstat &= 0x1f; + if (linkstat != 8) + ipath_dev_err(dd, "PCIe width %u, " + "performance reduced\n", linkstat); + } + else + ipath_dev_err(dd, "Can't find PCI Express " + "capability!\n"); + return 0; +} + +static void ipath_init_pe_variables(void) +{ + /* + * bits for selecting i2c direction and values, + * used for I2C serial flash + */ + ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM; + ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM; + ipath_gpio_sda = IPATH_GPIO_SDA; + ipath_gpio_scl = IPATH_GPIO_SCL; + + /* variables for sanity checking interrupt and errors */ + infinipath_hwe_bitsextant = + (INFINIPATH_HWE_RXEMEMPARITYERR_MASK << + INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) | + (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK << + INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) | + INFINIPATH_HWE_PCIE1PLLFAILED | + INFINIPATH_HWE_PCIE0PLLFAILED | + INFINIPATH_HWE_PCIEPOISONEDTLP | + INFINIPATH_HWE_PCIECPLTIMEOUT | + INFINIPATH_HWE_PCIEBUSPARITYXTLH | + INFINIPATH_HWE_PCIEBUSPARITYXADM | + INFINIPATH_HWE_PCIEBUSPARITYRADM | + INFINIPATH_HWE_MEMBISTFAILED | + INFINIPATH_HWE_COREPLL_FBSLIP | + INFINIPATH_HWE_COREPLL_RFSLIP | + INFINIPATH_HWE_SERDESPLLFAILED | + INFINIPATH_HWE_IBCBUSTOSPCPARITYERR | + INFINIPATH_HWE_IBCBUSFRSPCPARITYERR; + infinipath_i_bitsextant = + (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) | + (INFINIPATH_I_RCVAVAIL_MASK << + INFINIPATH_I_RCVAVAIL_SHIFT) | + INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT | + INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO; + infinipath_e_bitsextant = + INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC | + INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN | + INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN | + INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR | + INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP | + INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION | + INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL | + INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN | + INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK | + INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN | + INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN | + INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT | + INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | + INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED | + INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET | + INFINIPATH_E_HARDWARE; + + infinipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK; + infinipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK; +} + +/* setup the MSI stuff again after a reset. I'd like to just call + * pci_enable_msi() and request_irq() again, but when I do that, + * the MSI enable bit doesn't get set in the command word, and + * we switch to to a different interrupt vector, which is confusing, + * so I instead just do it all inline. Perhaps somehow can tie this + * into the PCIe hotplug support at some point + * Note, because I'm doing it all here, I don't call pci_disable_msi() + * or free_irq() at the start of ipath_setup_pe_reset(). + */ +static int ipath_reinit_msi(struct ipath_devdata *dd) +{ + int pos; + u16 control; + int ret; + + if (!dd->ipath_msi_lo) { + dev_info(&dd->pcidev->dev, "Can't restore MSI config, " + "initial setup failed?\n"); + ret = 0; + goto bail; + } + + if (!(pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) { + ipath_dev_err(dd, "Can't find MSI capability, " + "can't restore MSI settings\n"); + ret = 0; + goto bail; + } + ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n", + dd->ipath_msi_lo, pos + PCI_MSI_ADDRESS_LO); + pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO, + dd->ipath_msi_lo); + ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n", + dd->ipath_msi_hi, pos + PCI_MSI_ADDRESS_HI); + pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI, + dd->ipath_msi_hi); + pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, &control); + if (!(control & PCI_MSI_FLAGS_ENABLE)) { + ipath_cdbg(VERBOSE, "MSI control at off %x was %x, " + "setting MSI enable (%x)\n", pos + PCI_MSI_FLAGS, + control, control | PCI_MSI_FLAGS_ENABLE); + control |= PCI_MSI_FLAGS_ENABLE; + pci_write_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, + control); + } + /* now rewrite the data (vector) info */ + pci_write_config_word(dd->pcidev, pos + + ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8), + dd->ipath_msi_data); + /* we restore the cachelinesize also, although it doesn't really + * matter */ + pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, + dd->ipath_pci_cacheline); + /* and now set the pci master bit again */ + pci_set_master(dd->pcidev); + ret = 1; + +bail: + return ret; +} + +/* This routine sleeps, so it can only be called from user context, not + * from interrupt context. If we need interrupt context, we can split + * it into two routines. +*/ +static int ipath_setup_pe_reset(struct ipath_devdata *dd) +{ + u64 val; + int i; + int ret; + + /* Use ERROR so it shows up in logs, etc. */ + ipath_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->ipath_unit); + /* keep chip from being accessed in a few places */ + dd->ipath_flags &= ~(IPATH_INITTED|IPATH_PRESENT); + val = dd->ipath_control | INFINIPATH_C_RESET; + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val); + mb(); + + for (i = 1; i <= 5; i++) { + int r; + /* allow MBIST, etc. to complete; longer on each retry. + * We sometimes get machine checks from bus timeout if no + * response, so for now, make it *really* long. + */ + msleep(1000 + (1 + i) * 2000); + if ((r = + pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, + dd->ipath_pcibar0))) + ipath_dev_err(dd, "rewrite of BAR0 failed: %d\n", + r); + if ((r = + pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, + dd->ipath_pcibar1))) + ipath_dev_err(dd, "rewrite of BAR1 failed: %d\n", + r); + /* now re-enable memory access */ + if ((r = pci_enable_device(dd->pcidev))) + ipath_dev_err(dd, "pci_enable_device failed after " + "reset: %d\n", r); + /* whether it worked or not, mark as present, again */ + dd->ipath_flags |= IPATH_PRESENT; + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision); + if (val == dd->ipath_revision) { + ipath_cdbg(VERBOSE, "Got matching revision " + "register %llx on try %d\n", + (unsigned long long) val, i); + ret = ipath_reinit_msi(dd); + goto bail; + } + /* Probably getting -1 back */ + ipath_dbg("Didn't get expected revision register, " + "got %llx, try %d\n", (unsigned long long) val, + i + 1); + } + ret = 0; /* failed */ + +bail: + return ret; +} + +/** + * ipath_pe_put_tid - write a TID in chip + * @dd: the infinipath device + * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidtype: 0 for eager, 1 for expected + * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing + * + * This exists as a separate routine to allow for special locking etc. + * It's used for both the full cleanup on exit, as well as the normal + * setup and teardown. + */ +static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr, + u32 type, unsigned long pa) +{ + u32 __iomem *tidp32 = (u32 __iomem *)tidptr; + unsigned long flags = 0; /* keep gcc quiet */ + + if (pa != dd->ipath_tidinvalid) { + if (pa & ((1U << 11) - 1)) { + dev_info(&dd->pcidev->dev, "BUG: physaddr %lx " + "not 4KB aligned!\n", pa); + return; + } + pa >>= 11; + /* paranoia check */ + if (pa & (7<<29)) + ipath_dev_err(dd, + "BUG: Physical page address 0x%lx " + "has bits set in 31-29\n", pa); + + if (type == 0) + pa |= dd->ipath_tidtemplate; + else /* for now, always full 4KB page */ + pa |= 2 << 29; + } + + /* workaround chip bug 9437 by writing each TID twice + * and holding a spinlock around the writes, so they don't + * intermix with other TID (eager or expected) writes + * Unfortunately, this call can be done from interrupt level + * for the port 0 eager TIDs, so we have to use irqsave + */ + spin_lock_irqsave(&dd->ipath_tid_lock, flags); + ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xfeeddeaf); + if (dd->ipath_kregbase) + writel(pa, tidp32); + ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xdeadbeef); + mmiowb(); + spin_unlock_irqrestore(&dd->ipath_tid_lock, flags); +} + +/** + * ipath_pe_clear_tid - clear all TID entries for a port, expected and eager + * @dd: the infinipath device + * @port: the port + * + * clear all TID entries for a port, expected and eager. + * Used from ipath_close(). On this chip, TIDs are only 32 bits, + * not 64, but they are still on 64 bit boundaries, so tidbase + * is declared as u64 * for the pointer math, even though we write 32 bits + */ +static void ipath_pe_clear_tids(struct ipath_devdata *dd, unsigned port) +{ + u64 __iomem *tidbase; + unsigned long tidinv; + int i; + + if (!dd->ipath_kregbase) + return; + + ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port); + + tidinv = dd->ipath_tidinvalid; + tidbase = (u64 __iomem *) + ((char __iomem *)(dd->ipath_kregbase) + + dd->ipath_rcvtidbase + + port * dd->ipath_rcvtidcnt * sizeof(*tidbase)); + + for (i = 0; i < dd->ipath_rcvtidcnt; i++) + ipath_pe_put_tid(dd, &tidbase[i], 0, tidinv); + + tidbase = (u64 __iomem *) + ((char __iomem *)(dd->ipath_kregbase) + + dd->ipath_rcvegrbase + + port * dd->ipath_rcvegrcnt * sizeof(*tidbase)); + + for (i = 0; i < dd->ipath_rcvegrcnt; i++) + ipath_pe_put_tid(dd, &tidbase[i], 1, tidinv); +} + +/** + * ipath_pe_tidtemplate - setup constants for TID updates + * @dd: the infinipath device + * + * We setup stuff that we use a lot, to avoid calculating each time + */ +static void ipath_pe_tidtemplate(struct ipath_devdata *dd) +{ + u32 egrsize = dd->ipath_rcvegrbufsize; + + /* For now, we always allocate 4KB buffers (at init) so we can + * receive max size packets. We may want a module parameter to + * specify 2KB or 4KB and/or make be per port instead of per device + * for those who want to reduce memory footprint. Note that the + * ipath_rcvhdrentsize size must be large enough to hold the largest + * IB header (currently 96 bytes) that we expect to handle (plus of + * course the 2 dwords of RHF). + */ + if (egrsize == 2048) + dd->ipath_tidtemplate = 1U << 29; + else if (egrsize == 4096) + dd->ipath_tidtemplate = 2U << 29; + else { + egrsize = 4096; + dev_info(&dd->pcidev->dev, "BUG: unsupported egrbufsize " + "%u, using %u\n", dd->ipath_rcvegrbufsize, + egrsize); + dd->ipath_tidtemplate = 2U << 29; + } + dd->ipath_tidinvalid = 0; +} + +static int ipath_pe_early_init(struct ipath_devdata *dd) +{ + dd->ipath_flags |= IPATH_4BYTE_TID; + + /* + * For openfabrics, we need to be able to handle an IB header of + * 24 dwords. HT chip has arbitrary sized receive buffers, so we + * made them the same size as the PIO buffers. This chip does not + * handle arbitrary size buffers, so we need the header large enough + * to handle largest IB header, but still have room for a 2KB MTU + * standard IB packet. + */ + dd->ipath_rcvhdrentsize = 24; + dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE; + + /* + * To truly support a 4KB MTU (for usermode), we need to + * bump this to a larger value. For now, we use them for + * the kernel only. + */ + dd->ipath_rcvegrbufsize = 2048; + /* + * the min() check here is currently a nop, but it may not always + * be, depending on just how we do ipath_rcvegrbufsize + */ + dd->ipath_ibmaxlen = min(dd->ipath_piosize2k, + dd->ipath_rcvegrbufsize + + (dd->ipath_rcvhdrentsize << 2)); + dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen; + + /* + * We can request a receive interrupt for 1 or + * more packets from current offset. For now, we set this + * up for a single packet. + */ + dd->ipath_rhdrhead_intr_off = 1ULL<<32; + + ipath_get_eeprom_info(dd); + + return 0; +} + +int __attribute__((weak)) ipath_unordered_wc(void) +{ + return 0; +} + +/** + * ipath_init_pe_get_base_info - set chip-specific flags for user code + * @dd: the infinipath device + * @kbase: ipath_base_info pointer + * + * We set the PCIE flag because the lower bandwidth on PCIe vs + * HyperTransport can affect some user packet algorithims. + */ +static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase) +{ + struct ipath_base_info *kinfo = kbase; + + if (ipath_unordered_wc()) { + kinfo->spi_runtime_flags |= IPATH_RUNTIME_FORCE_WC_ORDER; + ipath_cdbg(PROC, "Intel processor, forcing WC order\n"); + } + else + ipath_cdbg(PROC, "Not Intel processor, WC ordered\n"); + + kinfo->spi_runtime_flags |= IPATH_RUNTIME_PCIE; + + return 0; +} + +/** + * ipath_init_iba6120_funcs - set up the chip-specific function pointers + * @dd: the infinipath device + * + * This is global, and is called directly at init to set up the + * chip-specific function pointers for later use. + */ +void ipath_init_iba6120_funcs(struct ipath_devdata *dd) +{ + dd->ipath_f_intrsetup = ipath_pe_intconfig; + dd->ipath_f_bus = ipath_setup_pe_config; + dd->ipath_f_reset = ipath_setup_pe_reset; + dd->ipath_f_get_boardname = ipath_pe_boardname; + dd->ipath_f_init_hwerrors = ipath_pe_init_hwerrors; + dd->ipath_f_early_init = ipath_pe_early_init; + dd->ipath_f_handle_hwerrors = ipath_pe_handle_hwerrors; + dd->ipath_f_quiet_serdes = ipath_pe_quiet_serdes; + dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes; + dd->ipath_f_clear_tids = ipath_pe_clear_tids; + dd->ipath_f_put_tid = ipath_pe_put_tid; + dd->ipath_f_cleanup = ipath_setup_pe_cleanup; + dd->ipath_f_setextled = ipath_setup_pe_setextled; + dd->ipath_f_get_base_info = ipath_pe_get_base_info; + + /* initialize chip-specific variables */ + dd->ipath_f_tidtemplate = ipath_pe_tidtemplate; + + /* + * setup the register offsets, since they are different for each + * chip + */ + dd->ipath_kregs = &ipath_pe_kregs; + dd->ipath_cregs = &ipath_pe_cregs; + + ipath_init_pe_variables(); +} + |