aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mthca/mthca_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/mthca/mthca_main.c')
-rw-r--r--drivers/infiniband/hw/mthca/mthca_main.c28
1 files changed, 28 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 266f347c670..9b9ff7bff35 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -52,6 +52,14 @@ MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
+#ifdef CONFIG_INFINIBAND_MTHCA_DEBUG
+
+int mthca_debug_level = 0;
+module_param_named(debug_level, mthca_debug_level, int, 0644);
+MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0");
+
+#endif /* CONFIG_INFINIBAND_MTHCA_DEBUG */
+
#ifdef CONFIG_PCI_MSI
static int msi_x = 0;
@@ -69,6 +77,10 @@ MODULE_PARM_DESC(msi, "attempt to use MSI if nonzero");
#endif /* CONFIG_PCI_MSI */
+static int tune_pci = 0;
+module_param(tune_pci, int, 0444);
+MODULE_PARM_DESC(tune_pci, "increase PCI burst from the default set by BIOS if nonzero");
+
static const char mthca_version[] __devinitdata =
DRV_NAME ": Mellanox InfiniBand HCA driver v"
DRV_VERSION " (" DRV_RELDATE ")\n";
@@ -90,6 +102,9 @@ static int __devinit mthca_tune_pci(struct mthca_dev *mdev)
int cap;
u16 val;
+ if (!tune_pci)
+ return 0;
+
/* First try to max out Read Byte Count */
cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX);
if (cap) {
@@ -176,6 +191,7 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim
mdev->limits.reserved_srqs = dev_lim->reserved_srqs;
mdev->limits.reserved_eecs = dev_lim->reserved_eecs;
mdev->limits.max_desc_sz = dev_lim->max_desc_sz;
+ mdev->limits.max_srq_sge = mthca_max_srq_sge(mdev);
/*
* Subtract 1 from the limit because we need to allocate a
* spare CQE so the HCA HW can tell the difference between an
@@ -191,6 +207,18 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim
mdev->limits.port_width_cap = dev_lim->max_port_width;
mdev->limits.page_size_cap = ~(u32) (dev_lim->min_page_sz - 1);
mdev->limits.flags = dev_lim->flags;
+ /*
+ * For old FW that doesn't return static rate support, use a
+ * value of 0x3 (only static rate values of 0 or 1 are handled),
+ * except on Sinai, where even old FW can handle static rate
+ * values of 2 and 3.
+ */
+ if (dev_lim->stat_rate_support)
+ mdev->limits.stat_rate_support = dev_lim->stat_rate_support;
+ else if (mdev->mthca_flags & MTHCA_FLAG_SINAI_OPT)
+ mdev->limits.stat_rate_support = 0xf;
+ else
+ mdev->limits.stat_rate_support = 0x3;
/* IB_DEVICE_RESIZE_MAX_WR not supported by driver.
May be doable since hardware supports it for SRQ.