diff options
Diffstat (limited to 'drivers/infiniband')
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_driver.c | 31 | ||||
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_file_ops.c | 7 | ||||
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_iba6120.c | 10 | ||||
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_init_chip.c | 30 | ||||
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_kernel.h | 1 | ||||
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_mad.c | 12 | ||||
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_qp.c | 12 | ||||
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_verbs.c | 7 |
8 files changed, 45 insertions, 65 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 367f2a38744..7121fe84ff8 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -73,6 +73,10 @@ module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO); MODULE_PARM_DESC(debug, "mask for debug prints"); EXPORT_SYMBOL_GPL(ipath_debug); +unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */ +module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO); +MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported"); + MODULE_LICENSE("GPL"); MODULE_AUTHOR("QLogic <support@pathscale.com>"); MODULE_DESCRIPTION("QLogic InfiniPath driver"); @@ -1800,7 +1804,7 @@ int ipath_set_mtu(struct ipath_devdata *dd, u16 arg) * piosize). We check that it's one of the valid IB sizes. */ if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 && - arg != 4096) { + (arg != 4096 || !ipath_mtu4096)) { ipath_dbg("Trying to set invalid mtu %u, failing\n", arg); ret = -EINVAL; goto bail; @@ -1816,6 +1820,8 @@ int ipath_set_mtu(struct ipath_devdata *dd, u16 arg) if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) { /* Only if it's not the initial value (or reset to it) */ if (piosize != dd->ipath_init_ibmaxlen) { + if (arg > piosize && arg <= dd->ipath_init_ibmaxlen) + piosize = dd->ipath_init_ibmaxlen; dd->ipath_ibmaxlen = piosize; changed = 1; } @@ -1829,24 +1835,17 @@ int ipath_set_mtu(struct ipath_devdata *dd, u16 arg) } if (changed) { + u64 ibc = dd->ipath_ibcctrl, ibdw; /* - * set the IBC maxpktlength to the size of our pio - * buffers in words + * update our housekeeping variables, and set IBC max + * size, same as init code; max IBC is max we allow in + * buffer, less the qword pbc, plus 1 for ICRC, in dwords */ - u64 ibc = dd->ipath_ibcctrl; + dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32); + ibdw = (dd->ipath_ibmaxlen >> 2) + 1; ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK << - INFINIPATH_IBCC_MAXPKTLEN_SHIFT); - - piosize = piosize - 2 * sizeof(u32); /* ignore pbc */ - dd->ipath_ibmaxlen = piosize; - piosize /= sizeof(u32); /* in words */ - /* - * for ICRC, which we only send in diag test pkt mode, and - * we don't need to worry about that for mtu - */ - piosize += 1; - - ibc |= piosize << INFINIPATH_IBCC_MAXPKTLEN_SHIFT; + dd->ibcc_mpl_shift); + ibc |= ibdw << dd->ibcc_mpl_shift; dd->ipath_ibcctrl = ibc; ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, dd->ipath_ibcctrl); diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 219b62d32ee..cddf29b9554 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -219,7 +219,12 @@ static int ipath_get_base_info(struct file *fp, kinfo->spi_pioalign = dd->ipath_palign; kinfo->spi_qpair = IPATH_KD_QP; - kinfo->spi_piosize = dd->ipath_ibmaxlen; + /* + * user mode PIO buffers are always 2KB, even when 4KB can + * be received, and sent via the kernel; this is ibmaxlen + * for 2K MTU. + */ + kinfo->spi_piosize = dd->ipath_piosize2k - 2 * sizeof(u32); kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */ kinfo->spi_port = pd->port_port; kinfo->spi_subport = subport_fp(fp); diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 828066e20ad..a9fc80409e5 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -1441,17 +1441,13 @@ static int ipath_pe_early_init(struct ipath_devdata *dd) dd->ipath_egrtidbase = (u64 __iomem *) ((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase); - /* - * To truly support a 4KB MTU (for usermode), we need to - * bump this to a larger value. For now, we use them for - * the kernel only. - */ - dd->ipath_rcvegrbufsize = 2048; + dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048; /* * the min() check here is currently a nop, but it may not always * be, depending on just how we do ipath_rcvegrbufsize */ - dd->ipath_ibmaxlen = min(dd->ipath_piosize2k, + dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k : + dd->ipath_piosize2k, dd->ipath_rcvegrbufsize + (dd->ipath_rcvhdrentsize << 2)); dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen; diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 5428affa910..f0d7848d9bb 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -155,24 +155,13 @@ static int bringup_link(struct ipath_devdata *dd) dd->ipath_control); /* - * Note that prior to try 14 or 15 of IB, the credit scaling - * wasn't working, because it was swapped for writes with the - * 1 bit default linkstate field + * set initial max size pkt IBC will send, including ICRC; it's the + * PIO buffer size in dwords, less 1; also see ipath_set_mtu() */ + val = (dd->ipath_ibmaxlen >> 2) + 1; + ibc = val << dd->ibcc_mpl_shift; - /* ignore pbc and align word */ - val = dd->ipath_piosize2k - 2 * sizeof(u32); - /* - * for ICRC, which we only send in diag test pkt mode, and we - * don't need to worry about that for mtu - */ - val += 1; - /* - * Set the IBC maxpktlength to the size of our pio buffers the - * maxpktlength is in words. This is *not* the IB data MTU. - */ - ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT; - /* in KB */ + /* flowcontrolwatermark is in units of KBytes */ ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT; /* * How often flowctrl sent. More or less in usecs; balance against @@ -295,12 +284,9 @@ static int init_chip_first(struct ipath_devdata *dd, val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize); dd->ipath_piosize2k = val & ~0U; dd->ipath_piosize4k = val >> 32; - /* - * Note: the chips support a maximum MTU of 4096, but the driver - * hasn't implemented this feature yet, so set the initial value - * to 2048. - */ - dd->ipath_ibmtu = 2048; + if (dd->ipath_piosize4k == 0 && ipath_mtu4096) + ipath_mtu4096 = 0; /* 4KB not supported by this chip */ + dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048; val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt); dd->ipath_piobcnt2k = val & ~0U; dd->ipath_piobcnt4k = val >> 32; diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 59dc8951624..70c0a0dd693 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -1066,6 +1066,7 @@ dma_addr_t ipath_map_single(struct pci_dev *, void *, size_t, int); #endif extern unsigned ipath_debug; /* debugging bit mask */ +extern unsigned ipath_mtu4096; #define IPATH_MAX_PARITY_ATTEMPTS 10000 /* max times to try recovery */ diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index b34b91d3723..aca876bae1c 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -292,13 +292,9 @@ static int recv_subn_get_portinfo(struct ib_smp *smp, /* pip->vl_arb_high_cap; // only one VL */ /* pip->vl_arb_low_cap; // only one VL */ /* InitTypeReply = 0 */ - /* - * Note: the chips support a maximum MTU of 4096, but the driver - * hasn't implemented this feature yet, so set the maximum value - * to 2048. - */ - pip->inittypereply_mtucap = IB_MTU_2048; - // HCAs ignore VLStallCount and HOQLife + /* our mtu cap depends on whether 4K MTU enabled or not */ + pip->inittypereply_mtucap = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048; + /* HCAs ignore VLStallCount and HOQLife */ /* pip->vlstallcnt_hoqlife; */ pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */ pip->mkey_violations = cpu_to_be16(dev->mkey_violations); @@ -491,6 +487,8 @@ static int recv_subn_set_portinfo(struct ib_smp *smp, mtu = 2048; break; case IB_MTU_4096: + if (!ipath_mtu4096) + goto err; mtu = 4096; break; default: diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c index 087ed316647..5c8094a0364 100644 --- a/drivers/infiniband/hw/ipath/ipath_qp.c +++ b/drivers/infiniband/hw/ipath/ipath_qp.c @@ -516,13 +516,13 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, goto inval; /* - * Note: the chips support a maximum MTU of 4096, but the driver - * hasn't implemented this feature yet, so don't allow Path MTU - * values greater than 2048. + * don't allow invalid Path MTU values or greater than 2048 + * unless we are configured for a 4KB MTU */ - if (attr_mask & IB_QP_PATH_MTU) - if (attr->path_mtu > IB_MTU_2048) - goto inval; + if ((attr_mask & IB_QP_PATH_MTU) && + (ib_mtu_enum_to_int(attr->path_mtu) == -1 || + (attr->path_mtu > IB_MTU_2048 && !ipath_mtu4096))) + goto inval; if (attr_mask & IB_QP_PATH_MIG_STATE) if (attr->path_mig_state != IB_MIG_MIGRATED && diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index 32d8f882e56..012ccb4f9a3 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1201,12 +1201,7 @@ static int ipath_query_port(struct ib_device *ibdev, props->max_vl_num = 1; /* VLCap = VL0 */ props->init_type_reply = 0; - /* - * Note: the chip supports a maximum MTU of 4096, but the driver - * hasn't implemented this feature yet, so set the maximum value - * to 2048. - */ - props->max_mtu = IB_MTU_2048; + props->max_mtu = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048; switch (dd->ipath_ibmtu) { case 4096: mtu = IB_MTU_4096; |