diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/touchright.c | 196 |
3 files changed, 209 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index fa038126d50..216db122937 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -120,4 +120,16 @@ config TOUCHSCREEN_PENMOUNT To compile this driver as a module, choose M here: the module will be called penmount. +config TOUCHSCREEN_TOUCHRIGHT + tristate "Touchright serial touchscreen" + select SERIO + help + Say Y here if you have a Touchright serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called touchright. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 72e7be8097a..deda25e3680 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o +obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c new file mode 100644 index 00000000000..1c89fa53865 --- /dev/null +++ b/drivers/input/touchscreen/touchright.c @@ -0,0 +1,196 @@ +/* + * Touchright serial touchscreen driver + * + * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com> + * + * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c) + * Copyright (c) 2004 Vojtech Pavlik + * and Dan Streetman <ddstreet@ieee.org> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Touchright serial touchscreen driver" + +MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define TR_FORMAT_TOUCH_BIT 0x01 +#define TR_FORMAT_STATUS_BYTE 0x40 +#define TR_FORMAT_STATUS_MASK ~TR_FORMAT_TOUCH_BIT + +#define TR_LENGTH 5 + +#define TR_MIN_XC 0 +#define TR_MAX_XC 0x1ff +#define TR_MIN_YC 0 +#define TR_MAX_YC 0x1ff + +/* + * Per-touchscreen data. + */ + +struct tr { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[TR_LENGTH]; + char phys[32]; +}; + +static irqreturn_t tr_interrupt(struct serio *serio, + unsigned char data, unsigned int flags, struct pt_regs *regs) +{ + struct tr *tr = serio_get_drvdata(serio); + struct input_dev *dev = tr->dev; + + tr->data[tr->idx] = data; + + if ((tr->data[0] & TR_FORMAT_STATUS_MASK) == TR_FORMAT_STATUS_BYTE) { + if (++tr->idx == TR_LENGTH) { + input_regs(dev, regs); + input_report_abs(dev, ABS_X, + (tr->data[1] << 5) | (tr->data[2] >> 1)); + input_report_abs(dev, ABS_Y, + (tr->data[3] << 5) | (tr->data[4] >> 1)); + input_report_key(dev, BTN_TOUCH, + tr->data[0] & TR_FORMAT_TOUCH_BIT); + input_sync(dev); + tr->idx = 0; + } + } + + return IRQ_HANDLED; +} + +/* + * tr_disconnect() is the opposite of tr_connect() + */ + +static void tr_disconnect(struct serio *serio) +{ + struct tr *tr = serio_get_drvdata(serio); + + input_get_device(tr->dev); + input_unregister_device(tr->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(tr->dev); + kfree(tr); +} + +/* + * tr_connect() is the routine that is called when someone adds a + * new serio device that supports the Touchright protocol and registers it as + * an input device. + */ + +static int tr_connect(struct serio *serio, struct serio_driver *drv) +{ + struct tr *tr; + struct input_dev *input_dev; + int err; + + tr = kzalloc(sizeof(struct tr), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!tr || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + tr->serio = serio; + tr->dev = input_dev; + snprintf(tr->phys, sizeof(tr->phys), "%s/input0", serio->phys); + + input_dev->private = tr; + input_dev->name = "Touchright Serial TouchScreen"; + input_dev->phys = tr->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TOUCHRIGHT; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(tr->dev, ABS_X, TR_MIN_XC, TR_MAX_XC, 0, 0); + input_set_abs_params(tr->dev, ABS_Y, TR_MIN_YC, TR_MAX_YC, 0, 0); + + serio_set_drvdata(serio, tr); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(tr->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(tr); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id tr_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_TOUCHRIGHT, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, tr_serio_ids); + +static struct serio_driver tr_drv = { + .driver = { + .name = "touchright", + }, + .description = DRIVER_DESC, + .id_table = tr_serio_ids, + .interrupt = tr_interrupt, + .connect = tr_connect, + .disconnect = tr_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init tr_init(void) +{ + serio_register_driver(&tr_drv); + return 0; +} + +static void __exit tr_exit(void) +{ + serio_unregister_driver(&tr_drv); +} + +module_init(tr_init); +module_exit(tr_exit); |