diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/keyboard/hilkbd.c | 140 |
1 files changed, 80 insertions, 60 deletions
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index aacf71f3cd4..e9d639ec283 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -198,45 +198,28 @@ static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) } -/* initialise HIL */ -static int __init -hil_keyb_init(void) +/* initialize HIL */ +static int __devinit hil_keyb_init(void) { unsigned char c; unsigned int i, kbid; wait_queue_head_t hil_wait; int err; - if (hil_dev.dev) { + if (hil_dev.dev) return -ENODEV; /* already initialized */ - } + init_waitqueue_head(&hil_wait); spin_lock_init(&hil_dev.lock); + hil_dev.dev = input_allocate_device(); if (!hil_dev.dev) return -ENOMEM; -#if defined(CONFIG_HP300) - if (!MACH_IS_HP300) { - err = -ENODEV; - goto err1; - } - if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { - printk(KERN_ERR "HIL: hardware register was not found\n"); - err = -ENODEV; - goto err1; - } - if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { - printk(KERN_ERR "HIL: IOPORT region already used\n"); - err = -EIO; - goto err1; - } -#endif - err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); if (err) { printk(KERN_ERR "HIL: Can't get IRQ\n"); - goto err2; + goto err1; } /* Turn on interrupts */ @@ -246,11 +229,9 @@ hil_keyb_init(void) hil_dev.valid = 0; /* clear any pending data */ hil_do(HIL_READKBDSADR, NULL, 0); - init_waitqueue_head(&hil_wait); - wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ); - if (!hil_dev.valid) { + wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ); + if (!hil_dev.valid) printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n"); - } c = hil_dev.c; hil_dev.valid = 0; @@ -268,7 +249,7 @@ hil_keyb_init(void) for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++) if (hphilkeyb_keycode[i] != KEY_RESERVED) - set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); + __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | @@ -287,34 +268,45 @@ hil_keyb_init(void) err = input_register_device(hil_dev.dev); if (err) { printk(KERN_ERR "HIL: Can't register device\n"); - goto err3; + goto err2; } + printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", hil_dev.dev->name, kbid, HILBASE, HIL_IRQ); return 0; -err3: +err2: hil_do(HIL_INTOFF, NULL, 0); - disable_irq(HIL_IRQ); free_irq(HIL_IRQ, hil_dev.dev_id); -err2: -#if defined(CONFIG_HP300) - release_region(HILBASE + HIL_DATA, 2); err1: -#endif input_free_device(hil_dev.dev); hil_dev.dev = NULL; return err; } +static void __devexit hil_keyb_exit(void) +{ + if (HIL_IRQ) + free_irq(HIL_IRQ, hil_dev.dev_id); + + /* Turn off interrupts */ + hil_do(HIL_INTOFF, NULL, 0); + + input_unregister_device(hil_dev.dev); + hil_dev.dev = NULL; +} #if defined(CONFIG_PARISC) -static int __init -hil_init_chip(struct parisc_device *dev) +static int __devinit hil_probe_chip(struct parisc_device *dev) { + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -ENODEV; + if (!dev->irq) { - printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n", + (void *)dev->hpa.start); return -ENODEV; } @@ -327,51 +319,79 @@ hil_init_chip(struct parisc_device *dev) return hil_keyb_init(); } +static int __devexit hil_remove_chip(struct parisc_device *dev) +{ + hil_keyb_exit(); + + return 0; +} + static struct parisc_device_id hil_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 }, { 0, } }; +#if 0 +/* Disabled to avoid conflicts with the HP SDC HIL drivers */ MODULE_DEVICE_TABLE(parisc, hil_tbl); +#endif static struct parisc_driver hil_driver = { - .name = "hil", - .id_table = hil_tbl, - .probe = hil_init_chip, + .name = "hil", + .id_table = hil_tbl, + .probe = hil_probe_chip, + .remove = __devexit_p(hil_remove_chip), }; -#endif /* CONFIG_PARISC */ - static int __init hil_init(void) { -#if defined(CONFIG_PARISC) return register_parisc_driver(&hil_driver); -#else - return hil_keyb_init(); -#endif } - static void __exit hil_exit(void) { - if (HIL_IRQ) { - disable_irq(HIL_IRQ); - free_irq(HIL_IRQ, hil_dev.dev_id); + unregister_parisc_driver(&hil_driver); +} + +#else /* !CONFIG_PARISC */ + +static int __init hil_init(void) +{ + int error; + + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -EBUSY; + + if (!MACH_IS_HP300) + return -ENODEV; + + if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { + printk(KERN_ERR "HIL: hardware register was not found\n"); + return -ENODEV; } - /* Turn off interrupts */ - hil_do(HIL_INTOFF, NULL, 0); + if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { + printk(KERN_ERR "HIL: IOPORT region already used\n"); + return -EIO; + } - input_unregister_device(hil_dev.dev); + error = hil_keyb_init(); + if (error) { + release_region(HILBASE + HIL_DATA, 2); + return error; + } - hil_dev.dev = NULL; + return 0; +} -#if defined(CONFIG_PARISC) - unregister_parisc_driver(&hil_driver); -#else - release_region(HILBASE+HIL_DATA, 2); -#endif +static void __exit hil_exit(void) +{ + hil_keyb_exit(); + release_region(HILBASE + HIL_DATA, 2); } +#endif /* CONFIG_PARISC */ + module_init(hil_init); module_exit(hil_exit); |