diff options
Diffstat (limited to 'drivers/macintosh')
-rw-r--r-- | drivers/macintosh/macio_asic.c | 17 | ||||
-rw-r--r-- | drivers/macintosh/rack-meter.c | 2 | ||||
-rw-r--r-- | drivers/macintosh/therm_adt746x.c | 4 | ||||
-rw-r--r-- | drivers/macintosh/therm_pm72.c | 4 | ||||
-rw-r--r-- | drivers/macintosh/therm_windtunnel.c | 4 | ||||
-rw-r--r-- | drivers/macintosh/via-maciisi.c | 2 | ||||
-rw-r--r-- | drivers/macintosh/via-pmu-led.c | 2 | ||||
-rw-r--r-- | drivers/macintosh/windfarm_lm75_sensor.c | 4 | ||||
-rw-r--r-- | drivers/macintosh/windfarm_max6690_sensor.c | 4 | ||||
-rw-r--r-- | drivers/macintosh/windfarm_smu_sat.c | 4 |
10 files changed, 35 insertions, 12 deletions
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 6e149f4a1ff..588a5b0bc4b 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -294,10 +294,11 @@ static void macio_setup_interrupts(struct macio_dev *dev) int i = 0, j = 0; for (;;) { - struct resource *res = &dev->interrupt[j]; + struct resource *res; if (j >= MACIO_DEV_COUNT_IRQS) break; + res = &dev->interrupt[j]; irq = irq_of_parse_and_map(np, i++); if (irq == NO_IRQ) break; @@ -321,9 +322,10 @@ static void macio_setup_resources(struct macio_dev *dev, int index; for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) { - struct resource *res = &dev->resource[index]; + struct resource *res; if (index >= MACIO_DEV_COUNT_RESOURCES) break; + res = &dev->resource[index]; *res = r; res->name = dev_name(&dev->ofdev.dev); @@ -378,6 +380,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, dev->ofdev.dev.bus = &macio_bus_type; dev->ofdev.dev.release = macio_release_dev; +#ifdef CONFIG_PCI + /* Set the DMA ops to the ones from the PCI device, this could be + * fishy if we didn't know that on PowerMac it's always direct ops + * or iommu ops that will work fine + */ + dev->ofdev.dev.archdata.dma_ops = + chip->lbus.pdev->dev.archdata.dma_ops; + dev->ofdev.dev.archdata.dma_data = + chip->lbus.pdev->dev.archdata.dma_data; +#endif /* CONFIG_PCI */ + #ifdef DEBUG printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n", dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj); diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c index a98ab72adf9..93fb32038b1 100644 --- a/drivers/macintosh/rack-meter.c +++ b/drivers/macintosh/rack-meter.c @@ -274,7 +274,7 @@ static void __devinit rackmeter_init_cpu_sniffer(struct rackmeter *rm) if (cpu > 1) continue; - rcpu = &rm->cpu[cpu];; + rcpu = &rm->cpu[cpu]; rcpu->prev_idle = get_cpu_idle_time(cpu); rcpu->prev_wall = jiffies64_to_cputime64(get_jiffies_64()); schedule_delayed_work_on(cpu, &rm->cpu[cpu].sniffer, diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index fde377c60cc..556f0feaa4d 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -124,6 +124,8 @@ read_reg(struct thermostat* th, int reg) return data; } +static struct i2c_driver thermostat_driver; + static int attach_thermostat(struct i2c_adapter *adapter) { @@ -148,7 +150,7 @@ attach_thermostat(struct i2c_adapter *adapter) * Let i2c-core delete that device on driver removal. * This is safe because i2c-core holds the core_lock mutex for us. */ - list_add_tail(&client->detected, &client->driver->clients); + list_add_tail(&client->detected, &thermostat_driver.clients); return 0; } diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index a028598af2d..ea32c7e5a9a 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -286,6 +286,8 @@ struct fcu_fan_table fcu_fans[] = { }, }; +static struct i2c_driver therm_pm72_driver; + /* * Utility function to create an i2c_client structure and * attach it to one of u3 adapters @@ -318,7 +320,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name) * Let i2c-core delete that device on driver removal. * This is safe because i2c-core holds the core_lock mutex for us. */ - list_add_tail(&clt->detected, &clt->driver->clients); + list_add_tail(&clt->detected, &therm_pm72_driver.clients); return clt; } diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 40023313a76..8b9364434aa 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -239,8 +239,8 @@ setup_hardware( void ) * to be on the safe side (OSX doesn't)... */ if( x.overheat_temp == (80 << 8) ) { - x.overheat_temp = 65 << 8; - x.overheat_hyst = 60 << 8; + x.overheat_temp = 75 << 8; + x.overheat_hyst = 70 << 8; write_reg( x.thermostat, 2, x.overheat_hyst, 2 ); write_reg( x.thermostat, 3, x.overheat_temp, 2 ); diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 4d686c0bdea..9ab5b0c34f0 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -288,7 +288,7 @@ static void maciisi_sync(struct adb_request *req) } /* This could be BAD... when the ADB controller doesn't respond * for this long, it's probably not coming back :-( */ - if(count >= 50) /* Hopefully shouldn't happen */ + if (count > 50) /* Hopefully shouldn't happen */ printk(KERN_ERR "maciisi_send_request: poll timed out!\n"); } diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index 55ad9567138..d242976bcfe 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -72,7 +72,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, } static struct led_classdev pmu_led = { - .name = "pmu-front-led", + .name = "pmu-led::front", #ifdef CONFIG_ADB_PMU_LED_IDE .default_trigger = "ide-disk", #endif diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index 529886c7a82..ed6426a1077 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -115,6 +115,8 @@ static int wf_lm75_probe(struct i2c_client *client, return rc; } +static struct i2c_driver wf_lm75_driver; + static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter, u8 addr, int ds1775, const char *loc) @@ -157,7 +159,7 @@ static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter, * Let i2c-core delete that device on driver removal. * This is safe because i2c-core holds the core_lock mutex for us. */ - list_add_tail(&client->detected, &client->driver->clients); + list_add_tail(&client->detected, &wf_lm75_driver.clients); return client; fail: return NULL; diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c index e2a55ecda2b..a67b349319e 100644 --- a/drivers/macintosh/windfarm_max6690_sensor.c +++ b/drivers/macintosh/windfarm_max6690_sensor.c @@ -88,6 +88,8 @@ static int wf_max6690_probe(struct i2c_client *client, return rc; } +static struct i2c_driver wf_max6690_driver; + static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter, u8 addr, const char *loc) { @@ -119,7 +121,7 @@ static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter, * Let i2c-core delete that device on driver removal. * This is safe because i2c-core holds the core_lock mutex for us. */ - list_add_tail(&client->detected, &client->driver->clients); + list_add_tail(&client->detected, &wf_max6690_driver.clients); return client; fail: diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c index 5da729e58f9..e20330a2895 100644 --- a/drivers/macintosh/windfarm_smu_sat.c +++ b/drivers/macintosh/windfarm_smu_sat.c @@ -194,6 +194,8 @@ static struct wf_sensor_ops wf_sat_ops = { .owner = THIS_MODULE, }; +static struct i2c_driver wf_sat_driver; + static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev) { struct i2c_board_info info; @@ -222,7 +224,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev) * Let i2c-core delete that device on driver removal. * This is safe because i2c-core holds the core_lock mutex for us. */ - list_add_tail(&client->detected, &client->driver->clients); + list_add_tail(&client->detected, &wf_sat_driver.clients); } static int wf_sat_probe(struct i2c_client *client, |