1 files changed, 0 insertions, 247 deletions
diff --git a/drivers/md/dm-mpath-hp-sw.c b/drivers/md/dm-mpath-hp-sw.c
deleted file mode 100644
index b63a0ab37c5..00000000000
--- a/drivers/md/dm-mpath-hp-sw.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (C) 2005 Mike Christie, All rights reserved.
- * Copyright (C) 2007 Red Hat, Inc. All rights reserved.
- * Authors: Mike Christie
- *          Dave Wysochanski
- *
- * This file is released under the GPL.
- *
- * This module implements the specific path activation code for
- * HP StorageWorks and FSC FibreCat Asymmetric (Active/Passive)
- * storage arrays.
- * These storage arrays have controller-based failover, not
- * LUN-based failover.  However, LUN-based failover is the design
- * of dm-multipath. Thus, this module is written for LUN-based failover.
- */
-#include <linux/blkdev.h>
-#include <linux/list.h>
-#include <linux/types.h>
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_dbg.h>
-
-#include "dm.h"
-#include "dm-hw-handler.h"
-
-#define DM_MSG_PREFIX "multipath hp-sw"
-#define DM_HP_HWH_NAME "hp-sw"
-#define DM_HP_HWH_VER "1.0.0"
-
-struct hp_sw_context {
-	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
-};
-
-/*
- * hp_sw_error_is_retryable - Is an HP-specific check condition retryable?
- * @req: path activation request
- *
- * Examine error codes of request and determine whether the error is retryable.
- * Some error codes are already retried by scsi-ml (see
- * scsi_decide_disposition), but some HP specific codes are not.
- * The intent of this routine is to supply the logic for the HP specific
- * check conditions.
- *
- * Returns:
- *  1 - command completed with retryable error
- *  0 - command completed with non-retryable error
- *
- * Possible optimizations
- * 1. More hardware-specific error codes
- */
-static int hp_sw_error_is_retryable(struct request *req)
-{
-	/*
-	 * NOT_READY is known to be retryable
-	 * For now we just dump out the sense data and call it retryable
-	 */
-	if (status_byte(req->errors) == CHECK_CONDITION)
-		__scsi_print_sense(DM_HP_HWH_NAME, req->sense, req->sense_len);
-
-	/*
-	 * At this point we don't have complete information about all the error
-	 * codes from this hardware, so we are just conservative and retry
-	 * when in doubt.
-	 */
-	return 1;
-}
-
-/*
- * hp_sw_end_io - Completion handler for HP path activation.
- * @req: path activation request
- * @error: scsi-ml error
- *
- *  Check sense data, free request structure, and notify dm that
- *  pg initialization has completed.
- *
- * Context: scsi-ml softirq
- *
- */
-static void hp_sw_end_io(struct request *req, int error)
-{
-	struct dm_path *path = req->end_io_data;
-	unsigned err_flags = 0;
-
-	if (!error) {
-		DMDEBUG("%s path activation command - success",
-			path->dev->name);
-		goto out;
-	}
-
-	if (hp_sw_error_is_retryable(req)) {
-		DMDEBUG("%s path activation command - retry",
-			path->dev->name);
-		err_flags = MP_RETRY;
-		goto out;
-	}
-
-	DMWARN("%s path activation fail - error=0x%x",
-	       path->dev->name, error);
-	err_flags = MP_FAIL_PATH;
-
-out:
-	req->end_io_data = NULL;
-	__blk_put_request(req->q, req);
-	dm_pg_init_complete(path, err_flags);
-}
-
-/*
- * hp_sw_get_request - Allocate an HP specific path activation request
- * @path: path on which request will be sent (needed for request queue)
- *
- * The START command is used for path activation request.
- * These arrays are controller-based failover, not LUN based.
- * One START command issued to a single path will fail over all
- * LUNs for the same controller.
- *
- * Possible optimizations
- * 1. Make timeout configurable
- * 2. Preallocate request
- */
-static struct request *hp_sw_get_request(struct dm_path *path)
-{
-	struct request *req;
-	struct block_device *bdev = path->dev->bdev;
-	struct request_queue *q = bdev_get_queue(bdev);
-	struct hp_sw_context *h = path->hwhcontext;
-
-	req = blk_get_request(q, WRITE, GFP_NOIO);
-	if (!req)
-		goto out;
-
-	req->timeout = 60 * HZ;
-
-	req->errors = 0;
-	req->cmd_type = REQ_TYPE_BLOCK_PC;
-	req->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
-	req->end_io_data = path;
-	req->sense = h->sense;
-	memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
-
-	req->cmd[0] = START_STOP;
-	req->cmd[4] = 1;
-	req->cmd_len = COMMAND_SIZE(req->cmd[0]);
-
-out:
-	return req;
-}
-
-/*
- * hp_sw_pg_init - HP path activation implementation.
- * @hwh: hardware handler specific data
- * @bypassed: unused; is the path group bypassed? (see dm-mpath.c)
- * @path: path to send initialization command
- *
- * Send an HP-specific path activation command on 'path'.
- * Do not try to optimize in any way, just send the activation command.
- * More than one path activation command may be sent to the same controller.
- * This seems to work fine for basic failover support.
- *
- * Possible optimizations
- * 1. Detect an in-progress activation request and avoid submitting another one
- * 2. Model the controller and only send a single activation request at a time
- * 3. Determine the state of a path before sending an activation request
- *
- * Context: kmpathd (see process_queued_ios() in dm-mpath.c)
- */
-static void hp_sw_pg_init(struct hw_handler *hwh, unsigned bypassed,
-			  struct dm_path *path)
-{
-	struct request *req;
-	struct hp_sw_context *h;
-
-	path->hwhcontext = hwh->context;
-	h = hwh->context;
-
-	req = hp_sw_get_request(path);
-	if (!req) {
-		DMERR("%s path activation command - allocation fail",
-		      path->dev->name);
-		goto retry;
-	}
-
-	DMDEBUG("%s path activation command - sent", path->dev->name);
-
-	blk_execute_rq_nowait(req->q, NULL, req, 1, hp_sw_end_io);
-	return;
-
-retry:
-	dm_pg_init_complete(path, MP_RETRY);
-}
-
-static int hp_sw_create(struct hw_handler *hwh, unsigned argc, char **argv)
-{
-	struct hp_sw_context *h;
-
-	h = kmalloc(sizeof(*h), GFP_KERNEL);
-	if (!h)
-		return -ENOMEM;
-
-	hwh->context = h;
-
-	return 0;
-}
-
-static void hp_sw_destroy(struct hw_handler *hwh)
-{
-	struct hp_sw_context *h = hwh->context;
-
-	kfree(h);
-}
-
-static struct hw_handler_type hp_sw_hwh = {
-	.name = DM_HP_HWH_NAME,
-	.module = THIS_MODULE,
-	.create = hp_sw_create,
-	.destroy = hp_sw_destroy,
-	.pg_init = hp_sw_pg_init,
-};
-
-static int __init hp_sw_init(void)
-{
-	int r;
-
-	r = dm_register_hw_handler(&hp_sw_hwh);
-	if (r < 0)
-		DMERR("register failed %d", r);
-	else
-		DMINFO("version " DM_HP_HWH_VER " loaded");
-
-	return r;
-}
-
-static void __exit hp_sw_exit(void)
-{
-	int r;
-
-	r = dm_unregister_hw_handler(&hp_sw_hwh);
-	if (r < 0)
-		DMERR("unregister failed %d", r);
-}
-
-module_init(hp_sw_init);
-module_exit(hp_sw_exit);
-
-MODULE_DESCRIPTION("DM Multipath HP StorageWorks / FSC FibreCat (A/P) support");
-MODULE_AUTHOR("Mike Christie, Dave Wysochanski <dm-devel@redhat.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DM_HP_HWH_VER);