diff options
Diffstat (limited to 'drivers/media/dvb/ttpci')
-rw-r--r-- | drivers/media/dvb/ttpci/budget-av.c | 194 |
1 files changed, 120 insertions, 74 deletions
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 68004187860..3ff67523cce 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -50,6 +50,12 @@ #define DEBICICAM 0x02420000 +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + struct budget_av { struct budget budget; struct video_device *vd; @@ -58,8 +64,15 @@ struct budget_av { struct tasklet_struct ciintf_irq_tasklet; int slot_status; struct dvb_ca_en50221 ca; + u8 reinitialise_demod:1; + u8 tda10021_poclkp:1; + u8 tda10021_ts_enabled; + int (*tda10021_set_frontend)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p); }; +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot); + + /* GPIO Connections: * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory @@ -129,9 +142,10 @@ static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int ad udelay(1); result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 1\n"); + } return result; } @@ -147,9 +161,10 @@ static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int a udelay(1); result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 2\n"); + } return result; } @@ -165,9 +180,11 @@ static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 addre udelay(1); result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 3\n"); + return -ETIMEDOUT; + } return result; } @@ -183,9 +200,10 @@ static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 addr udelay(1); result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 5\n"); + } return result; } @@ -193,12 +211,12 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) { struct budget_av *budget_av = (struct budget_av *) ca->data; struct saa7146_dev *saa = budget_av->budget.dev; - int timeout = 50; // 5 seconds (4.4.6 Ready) if (slot != 0) return -EINVAL; dprintk(1, "ciintf_slot_reset\n"); + budget_av->slot_status = SLOTSTATUS_RESET; saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ @@ -208,20 +226,17 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) msleep(20); /* 20 ms Vcc settling time */ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + msleep(20); - /* This should have been based on pin 16 READY of the pcmcia port, - * but AFAICS it is not routed to the saa7146 */ - while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d) - msleep(100); - - /* reinitialise the frontend */ - dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); + /* reinitialise the frontend if necessary */ + if (budget_av->reinitialise_demod) + dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); - if (timeout <= 0) - { - printk(KERN_ERR "budget-av: cam reset failed (timeout).\n"); - saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - return -ETIMEDOUT; + /* set tda10021 back to original clock configuration on reset */ + if (budget_av->tda10021_poclkp) { + tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0); + budget_av->tda10021_ts_enabled = 0; } return 0; @@ -238,7 +253,13 @@ static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) dprintk(1, "ciintf_slot_shutdown\n"); ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - budget_av->slot_status = 0; + budget_av->slot_status = SLOTSTATUS_NONE; + + /* set tda10021 back to original clock configuration when cam removed */ + if (budget_av->tda10021_poclkp) { + tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0); + budget_av->tda10021_ts_enabled = 0; + } return 0; } @@ -253,6 +274,13 @@ static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status); ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + + /* tda10021 seems to need a different TS clock config when data is routed to the CAM */ + if (budget_av->tda10021_poclkp) { + tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1); + budget_av->tda10021_ts_enabled = 1; + } + return 0; } @@ -260,50 +288,61 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open { struct budget_av *budget_av = (struct budget_av *) ca->data; struct saa7146_dev *saa = budget_av->budget.dev; - int cam_present = 0; + int result; if (slot != 0) return -EINVAL; - if (!budget_av->slot_status) - { - // first of all test the card detect line + /* test the card detect line - needs to be done carefully + * since it never goes high for some CAMs on this interface (e.g. topuptv) */ + if (budget_av->slot_status == SLOTSTATUS_NONE) { saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); udelay(1); - if (saa7146_read(saa, PSR) & MASK_06) - { - cam_present = 1; + if (saa7146_read(saa, PSR) & MASK_06) { + if (budget_av->slot_status == SLOTSTATUS_NONE) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + printk(KERN_INFO "budget-av: cam inserted A\n"); + } } saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } - // that is unreliable however, so try and read from IO memory - if (!cam_present) - { - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); - if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT) - { - cam_present = 1; + /* We also try and read from IO memory to work round the above detection bug. If + * there is no CAM, we will get a timeout. Only done if there is no cam + * present, since this test actually breaks some cams :( + * + * if the CI interface is not open, we also do the above test since we + * don't care if the cam has problems - we'll be resetting it on open() anyway */ + if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) { + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1); + if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + printk(KERN_INFO "budget-av: cam inserted B\n"); + } else if (result < 0) { + if (budget_av->slot_status != SLOTSTATUS_NONE) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 5\n"); + return 0; } } + } - // did we find something? - if (cam_present) { - printk(KERN_INFO "budget-av: cam inserted\n"); - budget_av->slot_status = 1; - } - } else if (!open) { - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); - if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT) - { - printk(KERN_INFO "budget-av: cam ejected\n"); - saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - budget_av->slot_status = 0; + /* read from attribute memory in reset/ready state to know when the CAM is ready */ + if (budget_av->slot_status == SLOTSTATUS_RESET) { + result = ciintf_read_attribute_mem(ca, slot, 0); + if (result == 0x1d) { + budget_av->slot_status = SLOTSTATUS_READY; } } - if (budget_av->slot_status == 1) - return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; - + /* work out correct return code */ + if (budget_av->slot_status != SLOTSTATUS_NONE) { + if (budget_av->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } return 0; } @@ -333,6 +372,8 @@ static int ciintf_init(struct budget_av *budget_av) budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; budget_av->ca.poll_slot_status = ciintf_poll_slot_status; budget_av->ca.data = budget_av; + budget_av->budget.ci_present = 1; + budget_av->slot_status = SLOTSTATUS_NONE; if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, &budget_av->ca, 0, 1)) != 0) { @@ -341,7 +382,6 @@ static int ciintf_init(struct budget_av *budget_av) } printk(KERN_INFO "budget-av: ci interface initialised.\n"); - budget_av->budget.ci_present = 1; return 0; error: @@ -976,7 +1016,7 @@ static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, static struct stv0299_config philips_sd1878_config = { .demod_address = 0x68, - .inittab = philips_sd1878_inittab, + .inittab = philips_sd1878_inittab, .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, @@ -1018,6 +1058,23 @@ static u8 read_pwm(struct budget_av *budget_av) #define SUBID_DVBT_KNC1 0x0030 #define SUBID_DVBT_CINERGY1200 0x1157 + +static int tda10021_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct budget_av* budget_av = fe->dvb->priv; + int result; + + result = budget_av->tda10021_set_frontend(fe, p); + if (budget_av->tda10021_ts_enabled) { + tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1); + } else { + tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0); + } + + return result; +} + static void frontend_init(struct budget_av *budget_av) { struct saa7146_dev * saa = budget_av->budget.dev; @@ -1083,34 +1140,23 @@ static void frontend_init(struct budget_av *budget_av) case SUBID_DVBC_KNC1: case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBC_CINERGY1200: + budget_av->reinitialise_demod = 1; fe = tda10021_attach(&philips_cu1216_config, &budget_av->budget.i2c_adap, read_pwm(budget_av)); if (fe) { + budget_av->tda10021_poclkp = 1; + budget_av->tda10021_set_frontend = fe->ops->set_frontend; + fe->ops->set_frontend = tda10021_set_frontend; fe->ops->tuner_ops.set_params = philips_cu1216_tuner_set_params; } break; case SUBID_DVBT_KNC1: case SUBID_DVBT_KNC1_PLUS: - fe = tda10046_attach(&philips_tu1216_config, - &budget_av->budget.i2c_adap); - if (fe) { - fe->ops->tuner_ops.init = philips_tu1216_tuner_init; - fe->ops->tuner_ops.set_params = philips_tu1216_tuner_set_params; - } - break; - - case SUBID_DVBC_CINERGY1200: - fe = tda10021_attach(&philips_cu1216_config, - &budget_av->budget.i2c_adap, - read_pwm(budget_av)); - if (fe) { - fe->ops->tuner_ops.set_params = philips_cu1216_tuner_set_params; - } - break; - case SUBID_DVBT_CINERGY1200: + budget_av->reinitialise_demod = 1; fe = tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap); if (fe) { |