diff options
Diffstat (limited to 'drivers/media')
522 files changed, 49904 insertions, 9405 deletions
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 11950698a2e..7a7803b5d49 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -5,16 +5,20 @@ menu "Multimedia devices" depends on HAS_IOMEM +comment "Multimedia core support" + +# +# V4L core and enabled API's +# + config VIDEO_DEV tristate "Video For Linux" ---help--- - Support for audio/video capture and overlay devices and FM radio - cards. The exact capabilities of each device vary. + V4L core support for video capture and overlay devices, webcams and + AM/FM radio cards. This kernel includes support for the new Video for Linux Two API, - (V4L2) as well as the original system. Drivers and applications - need to be rewritten to use V4L2, but drivers for popular cards - and applications for most video capture functions already exist. + (V4L2). Additional info and docs are available on the web at <http://linuxtv.org> @@ -30,14 +34,17 @@ config VIDEO_V4L2_COMMON depends on (I2C || I2C=n) && VIDEO_DEV default (I2C || I2C=n) && VIDEO_DEV -config VIDEO_V4L1 +config VIDEO_ALLOW_V4L1 bool "Enable Video For Linux API 1 (DEPRECATED)" depends on VIDEO_DEV && VIDEO_V4L2_COMMON default VIDEO_DEV && VIDEO_V4L2_COMMON select VIDEO_V4L1_COMPAT ---help--- - Enables a compatibility API used by most V4L2 devices to allow - its usage with legacy applications that supports only V4L1 api. + Enables drivers based on the legacy V4L1 API. + + This api were developed to be used at Kernel 2.2 and 2.4, but + lacks support for several video standards. There are several + drivers at kernel that still depends on it. If you are unsure as to whether this is required, answer Y. @@ -46,9 +53,8 @@ config VIDEO_V4L1_COMPAT depends on VIDEO_DEV default VIDEO_DEV ---help--- - This api were developed to be used at Kernel 2.2 and 2.4, but - lacks support for several video standards. There are several - drivers at kernel that still depends on it. + Enables a compatibility API used by most V4L2 devices to allow + its usage with legacy applications that supports only V4L1 api. Documentation for the original API is included in the file <Documentation/video4linux/API.html>. @@ -58,130 +64,56 @@ config VIDEO_V4L1_COMPAT If you are unsure as to whether this is required, answer Y. -config VIDEO_V4L2 - bool - depends on VIDEO_DEV && VIDEO_V4L2_COMMON - default VIDEO_DEV && VIDEO_V4L2_COMMON - -source "drivers/media/video/Kconfig" - -source "drivers/media/radio/Kconfig" - -source "drivers/media/dvb/Kconfig" - -source "drivers/media/common/Kconfig" +# +# DVB Core +# -config VIDEO_TUNER - tristate - depends on I2C - select TUNER_XC2028 if !VIDEO_TUNER_CUSTOMIZE - select TUNER_MT20XX if !VIDEO_TUNER_CUSTOMIZE - select TUNER_TDA8290 if !VIDEO_TUNER_CUSTOMIZE - select TUNER_TEA5761 if !VIDEO_TUNER_CUSTOMIZE - select TUNER_TEA5767 if !VIDEO_TUNER_CUSTOMIZE - select TUNER_SIMPLE if !VIDEO_TUNER_CUSTOMIZE - select TUNER_TDA9887 if !VIDEO_TUNER_CUSTOMIZE - -menuconfig VIDEO_TUNER_CUSTOMIZE - bool "Customize analog tuner modules to build" - depends on VIDEO_TUNER +config DVB_CORE + tristate "DVB for Linux" + depends on NET && INET + select CRC32 help - This allows the user to deselect tuner drivers unnecessary - for their hardware from the build. Use this option with care - as deselecting tuner drivers which are in fact necessary will - result in V4L devices which cannot be tuned due to lack of - driver support - - If unsure say N. - -if VIDEO_TUNER_CUSTOMIZE + DVB core utility functions for device handling, software fallbacks etc. -config TUNER_XC2028 - tristate "XCeive xc2028/xc3028 tuners" - depends on I2C && FW_LOADER - default m if VIDEO_TUNER_CUSTOMIZE - help - Say Y here to include support for the xc2028/xc3028 tuners. + Enable this if you own a DVB/ATSC adapter and want to use it or if + you compile Linux for a digital SetTopBox. -config TUNER_MT20XX - tristate "Microtune 2032 / 2050 tuners" - depends on I2C - default m if VIDEO_TUNER_CUSTOMIZE - help - Say Y here to include support for the MT2032 / MT2050 tuner. - -config TUNER_TDA8290 - tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo" - depends on I2C - select DVB_TDA827X - select DVB_TDA18271 - default m if VIDEO_TUNER_CUSTOMIZE - help - Say Y here to include support for Philips TDA8290+8275(a) tuner. + Say Y when you have a DVB or an ATSC card and want to use it. -config TUNER_TEA5761 - tristate "TEA 5761 radio tuner (EXPERIMENTAL)" - depends on I2C && EXPERIMENTAL - default m if VIDEO_TUNER_CUSTOMIZE - help - Say Y here to include support for the Philips TEA5761 radio tuner. + API specs and user tools are available from <http://www.linuxtv.org/>. -config TUNER_TEA5767 - tristate "TEA 5767 radio tuner" - depends on I2C - default m if VIDEO_TUNER_CUSTOMIZE - help - Say Y here to include support for the Philips TEA5767 radio tuner. + Please report problems regarding this support to the LinuxDVB + mailing list. -config TUNER_SIMPLE - tristate "Simple tuner support" - depends on I2C - select TUNER_TDA9887 - default m if VIDEO_TUNER_CUSTOMIZE - help - Say Y here to include support for various simple tuners. + If unsure say N. -config TUNER_TDA9887 - tristate "TDA 9885/6/7 analog IF demodulator" - depends on I2C - default m if VIDEO_TUNER_CUSTOMIZE - help - Say Y here to include support for Philips TDA9885/6/7 - analog IF demodulator. +config VIDEO_MEDIA + tristate + default (DVB_CORE && (VIDEO_DEV = n)) || (VIDEO_DEV && (DVB_CORE = n)) || (DVB_CORE && VIDEO_DEV) -endif # VIDEO_TUNER_CUSTOMIZE +comment "Multimedia drivers" -config VIDEOBUF_GEN - tristate +source "drivers/media/common/Kconfig" -config VIDEOBUF_DMA_SG - depends on PCI - select VIDEOBUF_GEN - tristate +# +# Tuner drivers for DVB and V4L +# -config VIDEOBUF_VMALLOC - select VIDEOBUF_GEN - tristate +source "drivers/media/common/tuners/Kconfig" -config VIDEOBUF_DVB - tristate - select VIDEOBUF_GEN - select VIDEOBUF_DMA_SG +# +# Video/Radio/Hybrid adapters +# -config VIDEO_BTCX - tristate +source "drivers/media/video/Kconfig" -config VIDEO_IR_I2C - tristate +source "drivers/media/radio/Kconfig" -config VIDEO_IR - tristate - depends on INPUT - select VIDEO_IR_I2C if I2C +# +# DVB adapters +# -config VIDEO_TVEEPROM - tristate - depends on I2C +source "drivers/media/dvb/Kconfig" config DAB boolean "DAB adapters" diff --git a/drivers/media/Makefile b/drivers/media/Makefile index 8cf91353b56..09a829d8a7e 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -2,7 +2,7 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := common/ -obj-y += video/ +obj-y += common/ video/ + obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ diff --git a/drivers/media/common/Makefile b/drivers/media/common/Makefile index 8e744823064..351b98b9b30 100644 --- a/drivers/media/common/Makefile +++ b/drivers/media/common/Makefile @@ -2,6 +2,7 @@ saa7146-objs := saa7146_i2c.o saa7146_core.o saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o ir-common-objs := ir-functions.o ir-keymaps.o +obj-y += tuners/ obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o obj-$(CONFIG_VIDEO_IR) += ir-common.o diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c index bb2a027b948..26650520792 100644 --- a/drivers/media/common/ir-functions.c +++ b/drivers/media/common/ir-functions.c @@ -34,7 +34,7 @@ static int repeat = 1; module_param(repeat, int, 0444); MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)"); -static int debug = 0; /* debug level (0,1,2) */ +static int debug; /* debug level (0,1,2) */ module_param(debug, int, 0644); #define dprintk(level, fmt, arg...) if (debug >= level) \ diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 2ab5a120470..8fa91f846d5 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -212,6 +212,51 @@ IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE] = { EXPORT_SYMBOL_GPL(ir_codes_pixelview); +/* + Mauro Carvalho Chehab <mchehab@infradead.org> + present on PV MPEG 8000GT + */ +IR_KEYTAB_TYPE ir_codes_pixelview_new[IR_KEYTAB_SIZE] = { + [0x3c] = KEY_PAUSE, /* Timeshift */ + [0x12] = KEY_POWER, + + [0x3d] = KEY_1, + [0x38] = KEY_2, + [0x18] = KEY_3, + [0x35] = KEY_4, + [0x39] = KEY_5, + [0x15] = KEY_6, + [0x36] = KEY_7, + [0x3a] = KEY_8, + [0x1e] = KEY_9, + [0x3e] = KEY_0, + + [0x1c] = KEY_AGAIN, /* LOOP */ + [0x3f] = KEY_MEDIA, /* Source */ + [0x1f] = KEY_LAST, /* +100 */ + [0x1b] = KEY_MUTE, + + [0x17] = KEY_CHANNELDOWN, + [0x16] = KEY_CHANNELUP, + [0x10] = KEY_VOLUMEUP, + [0x14] = KEY_VOLUMEDOWN, + [0x13] = KEY_ZOOM, + + [0x19] = KEY_SHUFFLE, /* SNAPSHOT */ + [0x1a] = KEY_SEARCH, /* scan */ + + [0x37] = KEY_REWIND, /* << */ + [0x32] = KEY_RECORD, /* o (red) */ + [0x33] = KEY_FORWARD, /* >> */ + [0x11] = KEY_STOP, /* square */ + [0x3b] = KEY_PLAY, /* > */ + [0x30] = KEY_PLAYPAUSE, /* || */ + + [0x31] = KEY_TV, + [0x34] = KEY_RADIO, +}; +EXPORT_SYMBOL_GPL(ir_codes_pixelview_new); + IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = { [ 0x00 ] = KEY_0, [ 0x01 ] = KEY_1, @@ -726,7 +771,11 @@ IR_KEYTAB_TYPE ir_codes_flyvideo[IR_KEYTAB_SIZE] = { [ 0x12 ] = KEY_CHANNELUP, // Channel + [ 0x13 ] = KEY_CHANNELDOWN, // Channel - [ 0x06 ] = KEY_AGAIN, // Recall - [ 0x10 ] = KEY_ENTER, // Enter + [ 0x10 ] = KEY_ENTER, // Enter + + [ 0x19 ] = KEY_BACK, // Rewind ( <<< ) + [ 0x1f ] = KEY_FORWARD, // Forward ( >>> ) + [ 0x0a ] = KEY_ANGLE, // (no label, may be used as the PAUSE button) }; EXPORT_SYMBOL_GPL(ir_codes_flyvideo); @@ -1157,7 +1206,8 @@ EXPORT_SYMBOL_GPL(ir_codes_purpletv); /* Mapping for the 28 key remote control as seen at http://www.sednacomputer.com/photo/cardbus-tv.jpg - Pavel Mihaylov <bin@bash.info> */ + Pavel Mihaylov <bin@bash.info> + Also for the remote bundled with Kozumi KTV-01C card */ IR_KEYTAB_TYPE ir_codes_pctv_sedna[IR_KEYTAB_SIZE] = { [ 0x00 ] = KEY_0, [ 0x01 ] = KEY_1, @@ -1188,6 +1238,11 @@ IR_KEYTAB_TYPE ir_codes_pctv_sedna[IR_KEYTAB_SIZE] = { [ 0x1c ] = KEY_RADIO, /* FM Radio */ [ 0x1d ] = KEY_RECORD, [ 0x1e ] = KEY_PAUSE, + /* additional codes for Kozumi's remote */ + [0x14] = KEY_INFO, /* OSD */ + [0x16] = KEY_OK, /* OK */ + [0x17] = KEY_DIGITS, /* Plus */ + [0x1f] = KEY_PLAY, /* Play */ }; EXPORT_SYMBOL_GPL(ir_codes_pctv_sedna); @@ -1988,6 +2043,76 @@ IR_KEYTAB_TYPE ir_codes_behold[IR_KEYTAB_SIZE] = { EXPORT_SYMBOL_GPL(ir_codes_behold); +/* Beholder Intl. Ltd. 2008 + * Dmitry Belimov d.belimov@google.com + * Keytable is used by BeholdTV Columbus + * The "ascii-art picture" below (in comments, first row + * is the keycode in hex, and subsequent row(s) shows + * the button labels (several variants when appropriate) + * helps to descide which keycodes to assign to the buttons. + */ +IR_KEYTAB_TYPE ir_codes_behold_columbus[IR_KEYTAB_SIZE] = { + + /* 0x13 0x11 0x1C 0x12 * + * Mute Source TV/FM Power * + * */ + + [0x13] = KEY_MUTE, + [0x11] = KEY_PROPS, + [0x1C] = KEY_TUNER, /* KEY_TV/KEY_RADIO */ + [0x12] = KEY_POWER, + + /* 0x01 0x02 0x03 0x0D * + * 1 2 3 Stereo * + * * + * 0x04 0x05 0x06 0x19 * + * 4 5 6 Snapshot * + * * + * 0x07 0x08 0x09 0x10 * + * 7 8 9 Zoom * + * */ + [0x01] = KEY_1, + [0x02] = KEY_2, + [0x03] = KEY_3, + [0x0D] = KEY_SETUP, /* Setup key */ + [0x04] = KEY_4, + [0x05] = KEY_5, + [0x06] = KEY_6, + [0x19] = KEY_BOOKMARKS, /* Snapshot key */ + [0x07] = KEY_7, + [0x08] = KEY_8, + [0x09] = KEY_9, + [0x10] = KEY_ZOOM, + + /* 0x0A 0x00 0x0B 0x0C * + * RECALL 0 ChannelUp VolumeUp * + * */ + [0x0A] = KEY_AGAIN, + [0x00] = KEY_0, + [0x0B] = KEY_CHANNELUP, + [0x0C] = KEY_VOLUMEUP, + + /* 0x1B 0x1D 0x15 0x18 * + * Timeshift Record ChannelDown VolumeDown * + * */ + + [0x1B] = KEY_REWIND, + [0x1D] = KEY_RECORD, + [0x15] = KEY_CHANNELDOWN, + [0x18] = KEY_VOLUMEDOWN, + + /* 0x0E 0x1E 0x0F 0x1A * + * Stop Pause Previouse Next * + * */ + + [0x0E] = KEY_STOP, + [0x1E] = KEY_PAUSE, + [0x0F] = KEY_PREVIOUS, + [0x1A] = KEY_NEXT, + +}; +EXPORT_SYMBOL_GPL(ir_codes_behold_columbus); + /* * Remote control for the Genius TVGO A11MCE * Adrian Pardini <pardo.bsso@gmail.com> @@ -2033,3 +2158,84 @@ IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE] = { [0x50] = KEY_BLUE, }; EXPORT_SYMBOL_GPL(ir_codes_genius_tvgo_a11mce); + +/* + * Remote control for Powercolor Real Angel 330 + * Daniel Fraga <fragabr@gmail.com> + */ +IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE] = { + [0x38] = KEY_SWITCHVIDEOMODE, /* switch inputs */ + [0x0c] = KEY_MEDIA, /* Turn ON/OFF App */ + [0x00] = KEY_0, + [0x01] = KEY_1, + [0x02] = KEY_2, + [0x03] = KEY_3, + [0x04] = KEY_4, + [0x05] = KEY_5, + [0x06] = KEY_6, + [0x07] = KEY_7, + [0x08] = KEY_8, + [0x09] = KEY_9, + [0x0a] = KEY_DIGITS, /* single, double, tripple digit */ + [0x29] = KEY_PREVIOUS, /* previous channel */ + [0x12] = KEY_BRIGHTNESSUP, + [0x13] = KEY_BRIGHTNESSDOWN, + [0x2b] = KEY_MODE, /* stereo/mono */ + [0x2c] = KEY_TEXT, /* teletext */ + [0x20] = KEY_UP, /* channel up */ + [0x21] = KEY_DOWN, /* channel down */ + [0x10] = KEY_RIGHT, /* volume up */ + [0x11] = KEY_LEFT, /* volume down */ + [0x0d] = KEY_MUTE, + [0x1f] = KEY_RECORD, + [0x17] = KEY_PLAY, + [0x16] = KEY_PAUSE, + [0x0b] = KEY_STOP, + [0x27] = KEY_FASTFORWARD, + [0x26] = KEY_REWIND, + [0x1e] = KEY_SEARCH, /* autoscan */ + [0x0e] = KEY_SHUFFLE, /* snapshot */ + [0x2d] = KEY_SETUP, + [0x0f] = KEY_SCREEN, /* full screen */ + [0x14] = KEY_RADIO, /* FM radio */ + [0x25] = KEY_POWER, /* power */ +}; +EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel); + +IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = { + [0x20] = KEY_LIST, + [0x00] = KEY_POWER, + [0x28] = KEY_1, + [0x18] = KEY_2, + [0x38] = KEY_3, + [0x24] = KEY_4, + [0x14] = KEY_5, + [0x34] = KEY_6, + [0x2c] = KEY_7, + [0x1c] = KEY_8, + [0x3c] = KEY_9, + [0x12] = KEY_SUBTITLE, + [0x22] = KEY_0, + [0x32] = KEY_REWIND, + [0x3a] = KEY_SHUFFLE, + [0x02] = KEY_PRINT, + [0x11] = KEY_CHANNELDOWN, + [0x31] = KEY_CHANNELUP, + [0x0c] = KEY_ZOOM, + [0x1e] = KEY_VOLUMEDOWN, + [0x3e] = KEY_VOLUMEUP, + [0x0a] = KEY_MUTE, + [0x04] = KEY_AUDIO, + [0x26] = KEY_RECORD, + [0x06] = KEY_PLAY, + [0x36] = KEY_STOP, + [0x16] = KEY_PAUSE, + [0x2e] = KEY_REWIND, + [0x0e] = KEY_FASTFORWARD, + [0x30] = KEY_TEXT, + [0x21] = KEY_GREEN, + [0x01] = KEY_BLUE, + [0x08] = KEY_EPG, + [0x2a] = KEY_MENU, +}; +EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d); diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c index 168a8d3a5e5..89c7660b85d 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146_core.c @@ -74,7 +74,7 @@ static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev, if (err) { printk(KERN_ERR "%s: %s timed out while waiting for " "registers getting programmed\n", - dev->name, __FUNCTION__); + dev->name, __func__); return -ETIMEDOUT; } msleep(1); @@ -89,7 +89,7 @@ static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev, saa7146_read(dev, MC2); if (err) { DEB_S(("%s: %s timed out while waiting for transfer " - "completion\n", dev->name, __FUNCTION__)); + "completion\n", dev->name, __func__)); return -ETIMEDOUT; } msleep(1); @@ -111,7 +111,7 @@ static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev, if (!loops--) { printk(KERN_ERR "%s: %s timed out while waiting for " "registers getting programmed\n", - dev->name, __FUNCTION__); + dev->name, __func__); return -ETIMEDOUT; } udelay(1); @@ -125,7 +125,7 @@ static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev, saa7146_read(dev, MC2); if (!loops--) { DEB_S(("%s: %s timed out while waiting for transfer " - "completion\n", dev->name, __FUNCTION__)); + "completion\n", dev->name, __func__)); return -ETIMEDOUT; } udelay(5); @@ -306,25 +306,22 @@ static irqreturn_t interrupt_hw(int irq, void *dev_id) return IRQ_NONE; } - if( 0 != (dev->ext)) { - if( 0 != (dev->ext->irq_mask & isr )) { - if( 0 != dev->ext->irq_func ) { + if (dev->ext) { + if (dev->ext->irq_mask & isr) { + if (dev->ext->irq_func) dev->ext->irq_func(dev, &isr); - } isr &= ~dev->ext->irq_mask; } } if (0 != (isr & (MASK_27))) { DEB_INT(("irq: RPS0 (0x%08x).\n",isr)); - if( 0 != dev->vv_data && 0 != dev->vv_callback) { + if (dev->vv_data && dev->vv_callback) dev->vv_callback(dev,isr); - } isr &= ~MASK_27; } if (0 != (isr & (MASK_28))) { - if( 0 != dev->vv_data && 0 != dev->vv_callback) { + if (dev->vv_data && dev->vv_callback) dev->vv_callback(dev,isr); - } isr &= ~MASK_28; } if (0 != (isr & (MASK_16|MASK_17))) { diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index f0703d8bc3e..171afe7da6b 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -272,7 +272,7 @@ static int fops_open(struct inode *inode, struct file *file) result = 0; out: - if( fh != 0 && result != 0 ) { + if (fh && result != 0) { kfree(fh); file->private_data = NULL; } diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c index 7e7689afae6..35b01ec40a5 100644 --- a/drivers/media/common/saa7146_i2c.c +++ b/drivers/media/common/saa7146_i2c.c @@ -203,7 +203,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d return -ERESTARTSYS; printk(KERN_WARNING "%s %s [irq]: timed out waiting for end of xfer\n", - dev->name, __FUNCTION__); + dev->name, __func__); return -EIO; } status = saa7146_read(dev, I2C_STATUS); @@ -221,7 +221,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d } if (time_after(jiffies,timeout)) { printk(KERN_WARNING "%s %s: timed out waiting for MC2\n", - dev->name, __FUNCTION__); + dev->name, __func__); return -EIO; } } @@ -238,7 +238,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d * (no answer from nonexisistant device...) */ printk(KERN_WARNING "%s %s [poll]: timed out waiting for end of xfer\n", - dev->name, __FUNCTION__); + dev->name, __func__); return -EIO; } if (++trial < 50 && short_delay) diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c index bfbd5a841eb..74e2b56ecb5 100644 --- a/drivers/media/common/saa7146_vbi.c +++ b/drivers/media/common/saa7146_vbi.c @@ -407,8 +407,8 @@ static int vbi_open(struct saa7146_dev *dev, struct file *file) fh->vbi_fmt.start[1] = 312; fh->vbi_fmt.count[1] = 16; - videobuf_queue_pci_init(&fh->vbi_q, &vbi_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, // FIXME: does this really work? sizeof(struct saa7146_buf), diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 66fdbd0e6a6..3cbc6ebbe64 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1410,8 +1410,8 @@ static int video_open(struct saa7146_dev *dev, struct file *file) sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat); fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8; - videobuf_queue_pci_init(&fh->video_q, &video_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->video_q, &video_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct saa7146_buf), diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig new file mode 100644 index 00000000000..85482960d01 --- /dev/null +++ b/drivers/media/common/tuners/Kconfig @@ -0,0 +1,164 @@ +config MEDIA_ATTACH + bool "Load and attach frontend and tuner driver modules as needed" + depends on VIDEO_MEDIA + depends on MODULES + help + Remove the static dependency of DVB card drivers on all + frontend modules for all possible card variants. Instead, + allow the card drivers to only load the frontend modules + they require. + + Also, tuner module will automatically load a tuner driver + when needed, for analog mode. + + This saves several KBytes of memory. + + Note: You will need module-init-tools v3.2 or later for this feature. + + If unsure say Y. + +config MEDIA_TUNER + tristate + default VIDEO_MEDIA && I2C + depends on VIDEO_MEDIA && I2C + select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG + select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG + select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TEA5767 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMIZE + +menuconfig MEDIA_TUNER_CUSTOMIZE + bool "Customize analog and hybrid tuner modules to build" + depends on MEDIA_TUNER + help + This allows the user to deselect tuner drivers unnecessary + for their hardware from the build. Use this option with care + as deselecting tuner drivers which are in fact necessary will + result in V4L/DVB devices which cannot be tuned due to lack of + driver support + + If unsure say N. + +if MEDIA_TUNER_CUSTOMIZE + +config MEDIA_TUNER_SIMPLE + tristate "Simple tuner support" + depends on VIDEO_MEDIA && I2C + select MEDIA_TUNER_TDA9887 + default m if MEDIA_TUNER_CUSTOMIZE + help + Say Y here to include support for various simple tuners. + +config MEDIA_TUNER_TDA8290 + tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo" + depends on VIDEO_MEDIA && I2C + select MEDIA_TUNER_TDA827X + select MEDIA_TUNER_TDA18271 + default m if MEDIA_TUNER_CUSTOMIZE + help + Say Y here to include support for Philips TDA8290+8275(a) tuner. + +config MEDIA_TUNER_TDA827X + tristate "Philips TDA827X silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-T silicon tuner module. Say Y when you want to support this tuner. + +config MEDIA_TUNER_TDA18271 + tristate "NXP TDA18271 silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if DVB_FE_CUSTOMISE + help + A silicon tuner module. Say Y when you want to support this tuner. + +config MEDIA_TUNER_TDA9887 + tristate "TDA 9885/6/7 analog IF demodulator" + depends on VIDEO_MEDIA && I2C + default m if MEDIA_TUNER_CUSTOMIZE + help + Say Y here to include support for Philips TDA9885/6/7 + analog IF demodulator. + +config MEDIA_TUNER_TEA5761 + tristate "TEA 5761 radio tuner (EXPERIMENTAL)" + depends on VIDEO_MEDIA && I2C + depends on EXPERIMENTAL + default m if MEDIA_TUNER_CUSTOMIZE + help + Say Y here to include support for the Philips TEA5761 radio tuner. + +config MEDIA_TUNER_TEA5767 + tristate "TEA 5767 radio tuner" + depends on VIDEO_MEDIA && I2C + default m if MEDIA_TUNER_CUSTOMIZE + help + Say Y here to include support for the Philips TEA5767 radio tuner. + +config MEDIA_TUNER_MT20XX + tristate "Microtune 2032 / 2050 tuners" + depends on VIDEO_MEDIA && I2C + default m if MEDIA_TUNER_CUSTOMIZE + help + Say Y here to include support for the MT2032 / MT2050 tuner. + +config MEDIA_TUNER_MT2060 + tristate "Microtune MT2060 silicon IF tuner" + depends on VIDEO_MEDIA && I2C + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon IF tuner MT2060 from Microtune. + +config MEDIA_TUNER_MT2266 + tristate "Microtune MT2266 silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon baseband tuner MT2266 from Microtune. + +config MEDIA_TUNER_MT2131 + tristate "Microtune MT2131 silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon baseband tuner MT2131 from Microtune. + +config MEDIA_TUNER_QT1010 + tristate "Quantek QT1010 silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon tuner QT1010 from Quantek. + +config MEDIA_TUNER_XC2028 + tristate "XCeive xc2028/xc3028 tuners" + depends on VIDEO_MEDIA && I2C + depends on HOTPLUG + select FW_LOADER + default m if MEDIA_TUNER_CUSTOMIZE + help + Say Y here to include support for the xc2028/xc3028 tuners. + +config MEDIA_TUNER_XC5000 + tristate "Xceive XC5000 silicon tuner" + depends on VIDEO_MEDIA && I2C + depends on HOTPLUG + select FW_LOADER + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon tuner XC5000 from Xceive. + This device is only used inside a SiP called togther with a + demodulator for now. + +config MEDIA_TUNER_MXL5005S + tristate "MaxLinear MSL5005S silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon tuner MXL5005S from MaxLinear. + +endif # MEDIA_TUNER_CUSTOMIZE diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile new file mode 100644 index 00000000000..55f7e670629 --- /dev/null +++ b/drivers/media/common/tuners/Makefile @@ -0,0 +1,26 @@ +# +# Makefile for common V4L/DVB tuners +# + +tda18271-objs := tda18271-maps.o tda18271-common.o tda18271-fe.o + +obj-$(CONFIG_MEDIA_TUNER_XC2028) += tuner-xc2028.o +obj-$(CONFIG_MEDIA_TUNER_SIMPLE) += tuner-simple.o +# tuner-types will be merged into tuner-simple, in the future +obj-$(CONFIG_MEDIA_TUNER_SIMPLE) += tuner-types.o +obj-$(CONFIG_MEDIA_TUNER_MT20XX) += mt20xx.o +obj-$(CONFIG_MEDIA_TUNER_TDA8290) += tda8290.o +obj-$(CONFIG_MEDIA_TUNER_TEA5767) += tea5767.o +obj-$(CONFIG_MEDIA_TUNER_TEA5761) += tea5761.o +obj-$(CONFIG_MEDIA_TUNER_TDA9887) += tda9887.o +obj-$(CONFIG_MEDIA_TUNER_TDA827X) += tda827x.o +obj-$(CONFIG_MEDIA_TUNER_TDA18271) += tda18271.o +obj-$(CONFIG_MEDIA_TUNER_XC5000) += xc5000.o +obj-$(CONFIG_MEDIA_TUNER_MT2060) += mt2060.o +obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o +obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o +obj-$(CONFIG_MEDIA_TUNER_MT2131) += mt2131.o +obj-$(CONFIG_MEDIA_TUNER_MXL5005S) += mxl5005s.o + +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends diff --git a/drivers/media/dvb/frontends/mt2060.c b/drivers/media/common/tuners/mt2060.c index 1305b0e63ce..1305b0e63ce 100644 --- a/drivers/media/dvb/frontends/mt2060.c +++ b/drivers/media/common/tuners/mt2060.c diff --git a/drivers/media/dvb/frontends/mt2060.h b/drivers/media/common/tuners/mt2060.h index 0a86eab3a95..cb60caffb6b 100644 --- a/drivers/media/dvb/frontends/mt2060.h +++ b/drivers/media/common/tuners/mt2060.h @@ -30,14 +30,14 @@ struct mt2060_config { u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */ }; -#if defined(CONFIG_DVB_TUNER_MT2060) || (defined(CONFIG_DVB_TUNER_MT2060_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_MT2060) || (defined(CONFIG_MEDIA_TUNER_MT2060_MODULE) && defined(MODULE)) extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1); #else static inline struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_TUNER_MT2060 +#endif // CONFIG_MEDIA_TUNER_MT2060 #endif diff --git a/drivers/media/dvb/frontends/mt2060_priv.h b/drivers/media/common/tuners/mt2060_priv.h index 5eaccdefd0b..5eaccdefd0b 100644 --- a/drivers/media/dvb/frontends/mt2060_priv.h +++ b/drivers/media/common/tuners/mt2060_priv.h diff --git a/drivers/media/video/mt20xx.c b/drivers/media/common/tuners/mt20xx.c index 58bab653330..fbcb2823373 100644 --- a/drivers/media/video/mt20xx.c +++ b/drivers/media/common/tuners/mt20xx.c @@ -10,12 +10,10 @@ #include "tuner-i2c.h" #include "mt20xx.h" -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); -#define PREFIX "mt20xx" - /* ---------------------------------------------------------------------- */ static unsigned int optimize_vco = 1; @@ -24,7 +22,7 @@ module_param(optimize_vco, int, 0644); static unsigned int tv_antenna = 1; module_param(tv_antenna, int, 0644); -static unsigned int radio_antenna = 0; +static unsigned int radio_antenna; module_param(radio_antenna, int, 0644); /* ---------------------------------------------------------------------- */ @@ -611,6 +609,7 @@ struct dvb_frontend *microtune_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; + priv->i2c_props.name = "mt20xx"; //priv->radio_if2 = 10700 * 1000; /* 10.7MHz - FM radio */ @@ -647,7 +646,7 @@ struct dvb_frontend *microtune_attach(struct dvb_frontend *fe, default: tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n", name); - return 0; + return NULL; } strlcpy(fe->ops.tuner_ops.info.name, name, diff --git a/drivers/media/video/mt20xx.h b/drivers/media/common/tuners/mt20xx.h index 5e9c825d2e9..259553a2490 100644 --- a/drivers/media/video/mt20xx.h +++ b/drivers/media/common/tuners/mt20xx.h @@ -20,7 +20,7 @@ #include <linux/i2c.h> #include "dvb_frontend.h" -#if defined(CONFIG_TUNER_MT20XX) || (defined(CONFIG_TUNER_MT20XX_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_MT20XX) || (defined(CONFIG_MEDIA_TUNER_MT20XX_MODULE) && defined(MODULE)) extern struct dvb_frontend *microtune_attach(struct dvb_frontend *fe, struct i2c_adapter* i2c_adap, u8 i2c_addr); @@ -29,7 +29,7 @@ static inline struct dvb_frontend *microtune_attach(struct dvb_frontend *fe, struct i2c_adapter* i2c_adap, u8 i2c_addr) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/mt2131.c b/drivers/media/common/tuners/mt2131.c index 13cf1666817..e254bcfc2ef 100644 --- a/drivers/media/dvb/frontends/mt2131.c +++ b/drivers/media/common/tuners/mt2131.c @@ -110,7 +110,7 @@ static int mt2131_set_params(struct dvb_frontend *fe, priv->bandwidth = 0; freq = params->frequency / 1000; // Hz -> kHz - dprintk(1, "%s() freq=%d\n", __FUNCTION__, freq); + dprintk(1, "%s() freq=%d\n", __func__, freq); f_lo1 = freq + MT2131_IF1 * 1000; f_lo1 = (f_lo1 / 250) * 250; @@ -187,7 +187,7 @@ static int mt2131_set_params(struct dvb_frontend *fe, static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency) { struct mt2131_priv *priv = fe->tuner_priv; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); *frequency = priv->frequency; return 0; } @@ -195,7 +195,7 @@ static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency) static int mt2131_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) { struct mt2131_priv *priv = fe->tuner_priv; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); *bandwidth = priv->bandwidth; return 0; } @@ -214,7 +214,7 @@ static int mt2131_get_status(struct dvb_frontend *fe, u32 *status) mt2131_readreg(priv, 0x09, &afc_status); dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n", - __FUNCTION__, lock_status, afc_status); + __func__, lock_status, afc_status); return 0; } @@ -223,7 +223,7 @@ static int mt2131_init(struct dvb_frontend *fe) { struct mt2131_priv *priv = fe->tuner_priv; int ret; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); if ((ret = mt2131_writeregs(priv, mt2131_config1, sizeof(mt2131_config1))) < 0) @@ -243,7 +243,7 @@ static int mt2131_init(struct dvb_frontend *fe) static int mt2131_release(struct dvb_frontend *fe) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); kfree(fe->tuner_priv); fe->tuner_priv = NULL; return 0; @@ -273,7 +273,7 @@ struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe, struct mt2131_priv *priv = NULL; u8 id = 0; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL); if (priv == NULL) diff --git a/drivers/media/dvb/frontends/mt2131.h b/drivers/media/common/tuners/mt2131.h index 1e4ffe7dc8c..cd8376f6f7b 100644 --- a/drivers/media/dvb/frontends/mt2131.h +++ b/drivers/media/common/tuners/mt2131.h @@ -30,7 +30,7 @@ struct mt2131_config { u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */ }; -#if defined(CONFIG_DVB_TUNER_MT2131) || (defined(CONFIG_DVB_TUNER_MT2131_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_MT2131) || (defined(CONFIG_MEDIA_TUNER_MT2131_MODULE) && defined(MODULE)) extern struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2131_config *cfg, @@ -41,10 +41,10 @@ static inline struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe, struct mt2131_config *cfg, u16 if1) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif /* CONFIG_DVB_TUNER_MT2131 */ +#endif /* CONFIG_MEDIA_TUNER_MT2131 */ #endif /* __MT2131_H__ */ diff --git a/drivers/media/dvb/frontends/mt2131_priv.h b/drivers/media/common/tuners/mt2131_priv.h index e930759c2c0..e930759c2c0 100644 --- a/drivers/media/dvb/frontends/mt2131_priv.h +++ b/drivers/media/common/tuners/mt2131_priv.h diff --git a/drivers/media/dvb/frontends/mt2266.c b/drivers/media/common/tuners/mt2266.c index 54b18f94b14..54b18f94b14 100644 --- a/drivers/media/dvb/frontends/mt2266.c +++ b/drivers/media/common/tuners/mt2266.c diff --git a/drivers/media/dvb/frontends/mt2266.h b/drivers/media/common/tuners/mt2266.h index f31dd613ad3..4d083882d04 100644 --- a/drivers/media/dvb/frontends/mt2266.h +++ b/drivers/media/common/tuners/mt2266.h @@ -24,14 +24,14 @@ struct mt2266_config { u8 i2c_address; }; -#if defined(CONFIG_DVB_TUNER_MT2266) || (defined(CONFIG_DVB_TUNER_MT2266_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_MT2266) || (defined(CONFIG_MEDIA_TUNER_MT2266_MODULE) && defined(MODULE)) extern struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg); #else static inline struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_TUNER_MT2266 +#endif // CONFIG_MEDIA_TUNER_MT2266 #endif diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c new file mode 100644 index 00000000000..0dc2bef9f6a --- /dev/null +++ b/drivers/media/common/tuners/mxl5005s.c @@ -0,0 +1,4110 @@ +/* + MaxLinear MXL5005S VSB/QAM/DVBT tuner driver + + Copyright (C) 2008 MaxLinear + Copyright (C) 2006 Steven Toth <stoth@hauppauge.com> + Functions: + mxl5005s_reset() + mxl5005s_writereg() + mxl5005s_writeregs() + mxl5005s_init() + mxl5005s_reconfigure() + mxl5005s_AssignTunerMode() + mxl5005s_set_params() + mxl5005s_get_frequency() + mxl5005s_get_bandwidth() + mxl5005s_release() + mxl5005s_attach() + + Copyright (C) 2008 Realtek + Copyright (C) 2008 Jan Hoogenraad + Functions: + mxl5005s_SetRfFreqHz() + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +/* + History of this driver (Steven Toth): + I was given a public release of a linux driver that included + support for the MaxLinear MXL5005S silicon tuner. Analysis of + the tuner driver showed clearly three things. + + 1. The tuner driver didn't support the LinuxTV tuner API + so the code Realtek added had to be removed. + + 2. A significant amount of the driver is reference driver code + from MaxLinear, I felt it was important to identify and + preserve this. + + 3. New code has to be added to interface correctly with the + LinuxTV API, as a regular kernel module. + + Other than the reference driver enum's, I've clearly marked + sections of the code and retained the copyright of the + respective owners. +*/ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include "dvb_frontend.h" +#include "mxl5005s.h" + +static int debug; + +#define dprintk(level, arg...) do { \ + if (level <= debug) \ + printk(arg); \ + } while (0) + +#define TUNER_REGS_NUM 104 +#define INITCTRL_NUM 40 + +#ifdef _MXL_PRODUCTION +#define CHCTRL_NUM 39 +#else +#define CHCTRL_NUM 36 +#endif + +#define MXLCTRL_NUM 189 +#define MASTER_CONTROL_ADDR 9 + +/* Enumeration of Master Control Register State */ +enum master_control_state { + MC_LOAD_START = 1, + MC_POWER_DOWN, + MC_SYNTH_RESET, + MC_SEQ_OFF +}; + +/* Enumeration of MXL5005 Tuner Modulation Type */ +enum { + MXL_DEFAULT_MODULATION = 0, + MXL_DVBT, + MXL_ATSC, + MXL_QAM, + MXL_ANALOG_CABLE, + MXL_ANALOG_OTA +}; + +/* MXL5005 Tuner Register Struct */ +struct TunerReg { + u16 Reg_Num; /* Tuner Register Address */ + u16 Reg_Val; /* Current sw programmed value waiting to be writen */ +}; + +enum { + /* Initialization Control Names */ + DN_IQTN_AMP_CUT = 1, /* 1 */ + BB_MODE, /* 2 */ + BB_BUF, /* 3 */ + BB_BUF_OA, /* 4 */ + BB_ALPF_BANDSELECT, /* 5 */ + BB_IQSWAP, /* 6 */ + BB_DLPF_BANDSEL, /* 7 */ + RFSYN_CHP_GAIN, /* 8 */ + RFSYN_EN_CHP_HIGAIN, /* 9 */ + AGC_IF, /* 10 */ + AGC_RF, /* 11 */ + IF_DIVVAL, /* 12 */ + IF_VCO_BIAS, /* 13 */ + CHCAL_INT_MOD_IF, /* 14 */ + CHCAL_FRAC_MOD_IF, /* 15 */ + DRV_RES_SEL, /* 16 */ + I_DRIVER, /* 17 */ + EN_AAF, /* 18 */ + EN_3P, /* 19 */ + EN_AUX_3P, /* 20 */ + SEL_AAF_BAND, /* 21 */ + SEQ_ENCLK16_CLK_OUT, /* 22 */ + SEQ_SEL4_16B, /* 23 */ + XTAL_CAPSELECT, /* 24 */ + IF_SEL_DBL, /* 25 */ + RFSYN_R_DIV, /* 26 */ + SEQ_EXTSYNTHCALIF, /* 27 */ + SEQ_EXTDCCAL, /* 28 */ + AGC_EN_RSSI, /* 29 */ + RFA_ENCLKRFAGC, /* 30 */ + RFA_RSSI_REFH, /* 31 */ + RFA_RSSI_REF, /* 32 */ + RFA_RSSI_REFL, /* 33 */ + RFA_FLR, /* 34 */ + RFA_CEIL, /* 35 */ + SEQ_EXTIQFSMPULSE, /* 36 */ + OVERRIDE_1, /* 37 */ + BB_INITSTATE_DLPF_TUNE, /* 38 */ + TG_R_DIV, /* 39 */ + EN_CHP_LIN_B, /* 40 */ + + /* Channel Change Control Names */ + DN_POLY = 51, /* 51 */ + DN_RFGAIN, /* 52 */ + DN_CAP_RFLPF, /* 53 */ + DN_EN_VHFUHFBAR, /* 54 */ + DN_GAIN_ADJUST, /* 55 */ + DN_IQTNBUF_AMP, /* 56 */ + DN_IQTNGNBFBIAS_BST, /* 57 */ + RFSYN_EN_OUTMUX, /* 58 */ + RFSYN_SEL_VCO_OUT, /* 59 */ + RFSYN_SEL_VCO_HI, /* 60 */ + RFSYN_SEL_DIVM, /* 61 */ + RFSYN_RF_DIV_BIAS, /* 62 */ + DN_SEL_FREQ, /* 63 */ + RFSYN_VCO_BIAS, /* 64 */ + CHCAL_INT_MOD_RF, /* 65 */ + CHCAL_FRAC_MOD_RF, /* 66 */ + RFSYN_LPF_R, /* 67 */ + CHCAL_EN_INT_RF, /* 68 */ + TG_LO_DIVVAL, /* 69 */ + TG_LO_SELVAL, /* 70 */ + TG_DIV_VAL, /* 71 */ + TG_VCO_BIAS, /* 72 */ + SEQ_EXTPOWERUP, /* 73 */ + OVERRIDE_2, /* 74 */ + OVERRIDE_3, /* 75 */ + OVERRIDE_4, /* 76 */ + SEQ_FSM_PULSE, /* 77 */ + GPIO_4B, /* 78 */ + GPIO_3B, /* 79 */ + GPIO_4, /* 80 */ + GPIO_3, /* 81 */ + GPIO_1B, /* 82 */ + DAC_A_ENABLE, /* 83 */ + DAC_B_ENABLE, /* 84 */ + DAC_DIN_A, /* 85 */ + DAC_DIN_B, /* 86 */ +#ifdef _MXL_PRODUCTION + RFSYN_EN_DIV, /* 87 */ + RFSYN_DIVM, /* 88 */ + DN_BYPASS_AGC_I2C /* 89 */ +#endif +}; + +/* + * The following context is source code provided by MaxLinear. + * MaxLinear source code - Common_MXL.h (?) + */ + +/* Constants */ +#define MXL5005S_REG_WRITING_TABLE_LEN_MAX 104 +#define MXL5005S_LATCH_BYTE 0xfe + +/* Register address, MSB, and LSB */ +#define MXL5005S_BB_IQSWAP_ADDR 59 +#define MXL5005S_BB_IQSWAP_MSB 0 +#define MXL5005S_BB_IQSWAP_LSB 0 + +#define MXL5005S_BB_DLPF_BANDSEL_ADDR 53 +#define MXL5005S_BB_DLPF_BANDSEL_MSB 4 +#define MXL5005S_BB_DLPF_BANDSEL_LSB 3 + +/* Standard modes */ +enum { + MXL5005S_STANDARD_DVBT, + MXL5005S_STANDARD_ATSC, +}; +#define MXL5005S_STANDARD_MODE_NUM 2 + +/* Bandwidth modes */ +enum { + MXL5005S_BANDWIDTH_6MHZ = 6000000, + MXL5005S_BANDWIDTH_7MHZ = 7000000, + MXL5005S_BANDWIDTH_8MHZ = 8000000, +}; +#define MXL5005S_BANDWIDTH_MODE_NUM 3 + +/* MXL5005 Tuner Control Struct */ +struct TunerControl { + u16 Ctrl_Num; /* Control Number */ + u16 size; /* Number of bits to represent Value */ + u16 addr[25]; /* Array of Tuner Register Address for each bit pos */ + u16 bit[25]; /* Array of bit pos in Reg Addr for each bit pos */ + u16 val[25]; /* Binary representation of Value */ +}; + +/* MXL5005 Tuner Struct */ +struct mxl5005s_state { + u8 Mode; /* 0: Analog Mode ; 1: Digital Mode */ + u8 IF_Mode; /* for Analog Mode, 0: zero IF; 1: low IF */ + u32 Chan_Bandwidth; /* filter channel bandwidth (6, 7, 8) */ + u32 IF_OUT; /* Desired IF Out Frequency */ + u16 IF_OUT_LOAD; /* IF Out Load Resistor (200/300 Ohms) */ + u32 RF_IN; /* RF Input Frequency */ + u32 Fxtal; /* XTAL Frequency */ + u8 AGC_Mode; /* AGC Mode 0: Dual AGC; 1: Single AGC */ + u16 TOP; /* Value: take over point */ + u8 CLOCK_OUT; /* 0: turn off clk out; 1: turn on clock out */ + u8 DIV_OUT; /* 4MHz or 16MHz */ + u8 CAPSELECT; /* 0: disable On-Chip pulling cap; 1: enable */ + u8 EN_RSSI; /* 0: disable RSSI; 1: enable RSSI */ + + /* Modulation Type; */ + /* 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable */ + u8 Mod_Type; + + /* Tracking Filter Type */ + /* 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H */ + u8 TF_Type; + + /* Calculated Settings */ + u32 RF_LO; /* Synth RF LO Frequency */ + u32 IF_LO; /* Synth IF LO Frequency */ + u32 TG_LO; /* Synth TG_LO Frequency */ + + /* Pointers to ControlName Arrays */ + u16 Init_Ctrl_Num; /* Number of INIT Control Names */ + struct TunerControl + Init_Ctrl[INITCTRL_NUM]; /* INIT Control Names Array Pointer */ + + u16 CH_Ctrl_Num; /* Number of CH Control Names */ + struct TunerControl + CH_Ctrl[CHCTRL_NUM]; /* CH Control Name Array Pointer */ + + u16 MXL_Ctrl_Num; /* Number of MXL Control Names */ + struct TunerControl + MXL_Ctrl[MXLCTRL_NUM]; /* MXL Control Name Array Pointer */ + + /* Pointer to Tuner Register Array */ + u16 TunerRegs_Num; /* Number of Tuner Registers */ + struct TunerReg + TunerRegs[TUNER_REGS_NUM]; /* Tuner Register Array Pointer */ + + /* Linux driver framework specific */ + struct mxl5005s_config *config; + struct dvb_frontend *frontend; + struct i2c_adapter *i2c; + + /* Cache values */ + u32 current_mode; + +}; + +static u16 MXL_GetMasterControl(u8 *MasterReg, int state); +static u16 MXL_ControlWrite(struct dvb_frontend *fe, u16 ControlNum, u32 value); +static u16 MXL_ControlRead(struct dvb_frontend *fe, u16 controlNum, u32 *value); +static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit, + u8 bitVal); +static u16 MXL_GetCHRegister(struct dvb_frontend *fe, u8 *RegNum, + u8 *RegVal, int *count); +static u32 MXL_Ceiling(u32 value, u32 resolution); +static u16 MXL_RegRead(struct dvb_frontend *fe, u8 RegNum, u8 *RegVal); +static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum, + u32 value, u16 controlGroup); +static u16 MXL_SetGPIO(struct dvb_frontend *fe, u8 GPIO_Num, u8 GPIO_Val); +static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum, + u8 *RegVal, int *count); +static u32 MXL_GetXtalInt(u32 Xtal_Freq); +static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq); +static void MXL_SynthIFLO_Calc(struct dvb_frontend *fe); +static void MXL_SynthRFTGLO_Calc(struct dvb_frontend *fe); +static u16 MXL_GetCHRegister_ZeroIF(struct dvb_frontend *fe, u8 *RegNum, + u8 *RegVal, int *count); +static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable, + u8 *datatable, u8 len); +static u16 MXL_IFSynthInit(struct dvb_frontend *fe); +static int mxl5005s_AssignTunerMode(struct dvb_frontend *fe, u32 mod_type, + u32 bandwidth); +static int mxl5005s_reconfigure(struct dvb_frontend *fe, u32 mod_type, + u32 bandwidth); + +/* ---------------------------------------------------------------- + * Begin: Custom code salvaged from the Realtek driver. + * Copyright (C) 2008 Realtek + * Copyright (C) 2008 Jan Hoogenraad + * This code is placed under the terms of the GNU General Public License + * + * Released by Realtek under GPLv2. + * Thanks to Realtek for a lot of support we received ! + * + * Revision: 080314 - original version + */ + +static int mxl5005s_SetRfFreqHz(struct dvb_frontend *fe, unsigned long RfFreqHz) +{ + struct mxl5005s_state *state = fe->tuner_priv; + unsigned char AddrTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX]; + unsigned char ByteTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX]; + int TableLen; + + u32 IfDivval = 0; + unsigned char MasterControlByte; + + dprintk(1, "%s() freq=%ld\n", __func__, RfFreqHz); + + /* Set MxL5005S tuner RF frequency according to example code. */ + + /* Tuner RF frequency setting stage 0 */ + MXL_GetMasterControl(ByteTable, MC_SYNTH_RESET); + AddrTable[0] = MASTER_CONTROL_ADDR; + ByteTable[0] |= state->config->AgcMasterByte; + + mxl5005s_writeregs(fe, AddrTable, ByteTable, 1); + + /* Tuner RF frequency setting stage 1 */ + MXL_TuneRF(fe, RfFreqHz); + + MXL_ControlRead(fe, IF_DIVVAL, &IfDivval); + + MXL_ControlWrite(fe, SEQ_FSM_PULSE, 0); + MXL_ControlWrite(fe, SEQ_EXTPOWERUP, 1); + MXL_ControlWrite(fe, IF_DIVVAL, 8); + MXL_GetCHRegister(fe, AddrTable, ByteTable, &TableLen); + + MXL_GetMasterControl(&MasterControlByte, MC_LOAD_START); + AddrTable[TableLen] = MASTER_CONTROL_ADDR ; + ByteTable[TableLen] = MasterControlByte | + state->config->AgcMasterByte; + TableLen += 1; + + mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen); + + /* Wait 30 ms. */ + msleep(150); + + /* Tuner RF frequency setting stage 2 */ + MXL_ControlWrite(fe, SEQ_FSM_PULSE, 1); + MXL_ControlWrite(fe, IF_DIVVAL, IfDivval); + MXL_GetCHRegister_ZeroIF(fe, AddrTable, ByteTable, &TableLen); + + MXL_GetMasterControl(&MasterControlByte, MC_LOAD_START); + AddrTable[TableLen] = MASTER_CONTROL_ADDR ; + ByteTable[TableLen] = MasterControlByte | + state->config->AgcMasterByte ; + TableLen += 1; + + mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen); + + msleep(100); + + return 0; +} +/* End: Custom code taken from the Realtek driver */ + +/* ---------------------------------------------------------------- + * Begin: Reference driver code found in the Realtek driver. + * Copyright (C) 2008 MaxLinear + */ +static u16 MXL5005_RegisterInit(struct dvb_frontend *fe) +{ + struct mxl5005s_state *state = fe->tuner_priv; + state->TunerRegs_Num = TUNER_REGS_NUM ; + + state->TunerRegs[0].Reg_Num = 9 ; + state->TunerRegs[0].Reg_Val = 0x40 ; + + state->TunerRegs[1].Reg_Num = 11 ; + state->TunerRegs[1].Reg_Val = 0x19 ; + + state->TunerRegs[2].Reg_Num = 12 ; + state->TunerRegs[2].Reg_Val = 0x60 ; + + state->TunerRegs[3].Reg_Num = 13 ; + state->TunerRegs[3].Reg_Val = 0x00 ; + + state->TunerRegs[4].Reg_Num = 14 ; + state->TunerRegs[4].Reg_Val = 0x00 ; + + state->TunerRegs[5].Reg_Num = 15 ; + state->TunerRegs[5].Reg_Val = 0xC0 ; + + state->TunerRegs[6].Reg_Num = 16 ; + state->TunerRegs[6].Reg_Val = 0x00 ; + + state->TunerRegs[7].Reg_Num = 17 ; + state->TunerRegs[7].Reg_Val = 0x00 ; + + state->TunerRegs[8].Reg_Num = 18 ; + state->TunerRegs[8].Reg_Val = 0x00 ; + + state->TunerRegs[9].Reg_Num = 19 ; + state->TunerRegs[9].Reg_Val = 0x34 ; + + state->TunerRegs[10].Reg_Num = 21 ; + state->TunerRegs[10].Reg_Val = 0x00 ; + + state->TunerRegs[11].Reg_Num = 22 ; + state->TunerRegs[11].Reg_Val = 0x6B ; + + state->TunerRegs[12].Reg_Num = 23 ; + state->TunerRegs[12].Reg_Val = 0x35 ; + + state->TunerRegs[13].Reg_Num = 24 ; + state->TunerRegs[13].Reg_Val = 0x70 ; + + state->TunerRegs[14].Reg_Num = 25 ; + state->TunerRegs[14].Reg_Val = 0x3E ; + + state->TunerRegs[15].Reg_Num = 26 ; + state->TunerRegs[15].Reg_Val = 0x82 ; + + state->TunerRegs[16].Reg_Num = 31 ; + state->TunerRegs[16].Reg_Val = 0x00 ; + + state->TunerRegs[17].Reg_Num = 32 ; + state->TunerRegs[17].Reg_Val = 0x40 ; + + state->TunerRegs[18].Reg_Num = 33 ; + state->TunerRegs[18].Reg_Val = 0x53 ; + + state->TunerRegs[19].Reg_Num = 34 ; + state->TunerRegs[19].Reg_Val = 0x81 ; + + state->TunerRegs[20].Reg_Num = 35 ; + state->TunerRegs[20].Reg_Val = 0xC9 ; + + state->TunerRegs[21].Reg_Num = 36 ; + state->TunerRegs[21].Reg_Val = 0x01 ; + + state->TunerRegs[22].Reg_Num = 37 ; + state->TunerRegs[22].Reg_Val = 0x00 ; + + state->TunerRegs[23].Reg_Num = 41 ; + state->TunerRegs[23].Reg_Val = 0x00 ; + + state->TunerRegs[24].Reg_Num = 42 ; + state->TunerRegs[24].Reg_Val = 0xF8 ; + + state->TunerRegs[25].Reg_Num = 43 ; + state->TunerRegs[25].Reg_Val = 0x43 ; + + state->TunerRegs[26].Reg_Num = 44 ; + state->TunerRegs[26].Reg_Val = 0x20 ; + + state->TunerRegs[27].Reg_Num = 45 ; + state->TunerRegs[27].Reg_Val = 0x80 ; + + state->TunerRegs[28].Reg_Num = 46 ; + state->TunerRegs[28].Reg_Val = 0x88 ; + + state->TunerRegs[29].Reg_Num = 47 ; + state->TunerRegs[29].Reg_Val = 0x86 ; + + state->TunerRegs[30].Reg_Num = 48 ; + state->TunerRegs[30].Reg_Val = 0x00 ; + + state->TunerRegs[31].Reg_Num = 49 ; + state->TunerRegs[31].Reg_Val = 0x00 ; + + state->TunerRegs[32].Reg_Num = 53 ; + state->TunerRegs[32].Reg_Val = 0x94 ; + + state->TunerRegs[33].Reg_Num = 54 ; + state->TunerRegs[33].Reg_Val = 0xFA ; + + state->TunerRegs[34].Reg_Num = 55 ; + state->TunerRegs[34].Reg_Val = 0x92 ; + + state->TunerRegs[35].Reg_Num = 56 ; + state->TunerRegs[35].Reg_Val = 0x80 ; + + state->TunerRegs[36].Reg_Num = 57 ; + state->TunerRegs[36].Reg_Val = 0x41 ; + + state->TunerRegs[37].Reg_Num = 58 ; + state->TunerRegs[37].Reg_Val = 0xDB ; + + state->TunerRegs[38].Reg_Num = 59 ; + state->TunerRegs[38].Reg_Val = 0x00 ; + + state->TunerRegs[39].Reg_Num = 60 ; + state->TunerRegs[39].Reg_Val = 0x00 ; + + state->TunerRegs[40].Reg_Num = 61 ; + state->TunerRegs[40].Reg_Val = 0x00 ; + + state->TunerRegs[41].Reg_Num = 62 ; + state->TunerRegs[41].Reg_Val = 0x00 ; + + state->TunerRegs[42].Reg_Num = 65 ; + state->TunerRegs[42].Reg_Val = 0xF8 ; + + state->TunerRegs[43].Reg_Num = 66 ; + state->TunerRegs[43].Reg_Val = 0xE4 ; + + state->TunerRegs[44].Reg_Num = 67 ; + state->TunerRegs[44].Reg_Val = 0x90 ; + + state->TunerRegs[45].Reg_Num = 68 ; + state->TunerRegs[45].Reg_Val = 0xC0 ; + + state->TunerRegs[46].Reg_Num = 69 ; + state->TunerRegs[46].Reg_Val = 0x01 ; + + state->TunerRegs[47].Reg_Num = 70 ; + state->TunerRegs[47].Reg_Val = 0x50 ; + + state->TunerRegs[48].Reg_Num = 71 ; + state->TunerRegs[48].Reg_Val = 0x06 ; + + state->TunerRegs[49].Reg_Num = 72 ; + state->TunerRegs[49].Reg_Val = 0x00 ; + + state->TunerRegs[50].Reg_Num = 73 ; + state->TunerRegs[50].Reg_Val = 0x20 ; + + state->TunerRegs[51].Reg_Num = 76 ; + state->TunerRegs[51].Reg_Val = 0xBB ; + + state->TunerRegs[52].Reg_Num = 77 ; + state->TunerRegs[52].Reg_Val = 0x13 ; + + state->TunerRegs[53].Reg_Num = 81 ; + state->TunerRegs[53].Reg_Val = 0x04 ; + + state->TunerRegs[54].Reg_Num = 82 ; + state->TunerRegs[54].Reg_Val = 0x75 ; + + state->TunerRegs[55].Reg_Num = 83 ; + state->TunerRegs[55].Reg_Val = 0x00 ; + + state->TunerRegs[56].Reg_Num = 84 ; + state->TunerRegs[56].Reg_Val = 0x00 ; + + state->TunerRegs[57].Reg_Num = 85 ; + state->TunerRegs[57].Reg_Val = 0x00 ; + + state->TunerRegs[58].Reg_Num = 91 ; + state->TunerRegs[58].Reg_Val = 0x70 ; + + state->TunerRegs[59].Reg_Num = 92 ; + state->TunerRegs[59].Reg_Val = 0x00 ; + + state->TunerRegs[60].Reg_Num = 93 ; + state->TunerRegs[60].Reg_Val = 0x00 ; + + state->TunerRegs[61].Reg_Num = 94 ; + state->TunerRegs[61].Reg_Val = 0x00 ; + + state->TunerRegs[62].Reg_Num = 95 ; + state->TunerRegs[62].Reg_Val = 0x0C ; + + state->TunerRegs[63].Reg_Num = 96 ; + state->TunerRegs[63].Reg_Val = 0x00 ; + + state->TunerRegs[64].Reg_Num = 97 ; + state->TunerRegs[64].Reg_Val = 0x00 ; + + state->TunerRegs[65].Reg_Num = 98 ; + state->TunerRegs[65].Reg_Val = 0xE2 ; + + state->TunerRegs[66].Reg_Num = 99 ; + state->TunerRegs[66].Reg_Val = 0x00 ; + + state->TunerRegs[67].Reg_Num = 100 ; + state->TunerRegs[67].Reg_Val = 0x00 ; + + state->TunerRegs[68].Reg_Num = 101 ; + state->TunerRegs[68].Reg_Val = 0x12 ; + + state->TunerRegs[69].Reg_Num = 102 ; + state->TunerRegs[69].Reg_Val = 0x80 ; + + state->TunerRegs[70].Reg_Num = 103 ; + state->TunerRegs[70].Reg_Val = 0x32 ; + + state->TunerRegs[71].Reg_Num = 104 ; + state->TunerRegs[71].Reg_Val = 0xB4 ; + + state->TunerRegs[72].Reg_Num = 105 ; + state->TunerRegs[72].Reg_Val = 0x60 ; + + state->TunerRegs[73].Reg_Num = 106 ; + state->TunerRegs[73].Reg_Val = 0x83 ; + + state->TunerRegs[74].Reg_Num = 107 ; + state->TunerRegs[74].Reg_Val = 0x84 ; + + state->TunerRegs[75].Reg_Num = 108 ; + state->TunerRegs[75].Reg_Val = 0x9C ; + + state->TunerRegs[76].Reg_Num = 109 ; + state->TunerRegs[76].Reg_Val = 0x02 ; + + state->TunerRegs[77].Reg_Num = 110 ; + state->TunerRegs[77].Reg_Val = 0x81 ; + + state->TunerRegs[78].Reg_Num = 111 ; + state->TunerRegs[78].Reg_Val = 0xC0 ; + + state->TunerRegs[79].Reg_Num = 112 ; + state->TunerRegs[79].Reg_Val = 0x10 ; + + state->TunerRegs[80].Reg_Num = 131 ; + state->TunerRegs[80].Reg_Val = 0x8A ; + + state->TunerRegs[81].Reg_Num = 132 ; + state->TunerRegs[81].Reg_Val = 0x10 ; + + state->TunerRegs[82].Reg_Num = 133 ; + state->TunerRegs[82].Reg_Val = 0x24 ; + + state->TunerRegs[83].Reg_Num = 134 ; + state->TunerRegs[83].Reg_Val = 0x00 ; + + state->TunerRegs[84].Reg_Num = 135 ; + state->TunerRegs[84].Reg_Val = 0x00 ; + + state->TunerRegs[85].Reg_Num = 136 ; + state->TunerRegs[85].Reg_Val = 0x7E ; + + state->TunerRegs[86].Reg_Num = 137 ; + state->TunerRegs[86].Reg_Val = 0x40 ; + + state->TunerRegs[87].Reg_Num = 138 ; + state->TunerRegs[87].Reg_Val = 0x38 ; + + state->TunerRegs[88].Reg_Num = 146 ; + state->TunerRegs[88].Reg_Val = 0xF6 ; + + state->TunerRegs[89].Reg_Num = 147 ; + state->TunerRegs[89].Reg_Val = 0x1A ; + + state->TunerRegs[90].Reg_Num = 148 ; + state->TunerRegs[90].Reg_Val = 0x62 ; + + state->TunerRegs[91].Reg_Num = 149 ; + state->TunerRegs[91].Reg_Val = 0x33 ; + + state->TunerRegs[92].Reg_Num = 150 ; + state->TunerRegs[92].Reg_Val = 0x80 ; + + state->TunerRegs[93].Reg_Num = 156 ; + state->TunerRegs[93].Reg_Val = 0x56 ; + + state->TunerRegs[94].Reg_Num = 157 ; + state->TunerRegs[94].Reg_Val = 0x17 ; + + state->TunerRegs[95].Reg_Num = 158 ; + state->TunerRegs[95].Reg_Val = 0xA9 ; + + state->TunerRegs[96].Reg_Num = 159 ; + state->TunerRegs[96].Reg_Val = 0x00 ; + + state->TunerRegs[97].Reg_Num = 160 ; + state->TunerRegs[97].Reg_Val = 0x00 ; + + state->TunerRegs[98].Reg_Num = 161 ; + state->TunerRegs[98].Reg_Val = 0x00 ; + + state->TunerRegs[99].Reg_Num = 162 ; + state->TunerRegs[99].Reg_Val = 0x40 ; + + state->TunerRegs[100].Reg_Num = 166 ; + state->TunerRegs[100].Reg_Val = 0xAE ; + + state->TunerRegs[101].Reg_Num = 167 ; + state->TunerRegs[101].Reg_Val = 0x1B ; + + state->TunerRegs[102].Reg_Num = 168 ; + state->TunerRegs[102].Reg_Val = 0xF2 ; + + state->TunerRegs[103].Reg_Num = 195 ; + state->TunerRegs[103].Reg_Val = 0x00 ; + + return 0 ; +} + +static u16 MXL5005_ControlInit(struct dvb_frontend *fe) +{ + struct mxl5005s_state *state = fe->tuner_priv; + state->Init_Ctrl_Num = INITCTRL_NUM; + + state->Init_Ctrl[0].Ctrl_Num = DN_IQTN_AMP_CUT ; + state->Init_Ctrl[0].size = 1 ; + state->Init_Ctrl[0].addr[0] = 73; + state->Init_Ctrl[0].bit[0] = 7; + state->Init_Ctrl[0].val[0] = 0; + + state->Init_Ctrl[1].Ctrl_Num = BB_MODE ; + state->Init_Ctrl[1].size = 1 ; + state->Init_Ctrl[1].addr[0] = 53; + state->Init_Ctrl[1].bit[0] = 2; + state->Init_Ctrl[1].val[0] = 1; + + state->Init_Ctrl[2].Ctrl_Num = BB_BUF ; + state->Init_Ctrl[2].size = 2 ; + state->Init_Ctrl[2].addr[0] = 53; + state->Init_Ctrl[2].bit[0] = 1; + state->Init_Ctrl[2].val[0] = 0; + state->Init_Ctrl[2].addr[1] = 57; + state->Init_Ctrl[2].bit[1] = 0; + state->Init_Ctrl[2].val[1] = 1; + + state->Init_Ctrl[3].Ctrl_Num = BB_BUF_OA ; + state->Init_Ctrl[3].size = 1 ; + state->Init_Ctrl[3].addr[0] = 53; + state->Init_Ctrl[3].bit[0] = 0; + state->Init_Ctrl[3].val[0] = 0; + + state->Init_Ctrl[4].Ctrl_Num = BB_ALPF_BANDSELECT ; + state->Init_Ctrl[4].size = 3 ; + state->Init_Ctrl[4].addr[0] = 53; + state->Init_Ctrl[4].bit[0] = 5; + state->Init_Ctrl[4].val[0] = 0; + state->Init_Ctrl[4].addr[1] = 53; + state->Init_Ctrl[4].bit[1] = 6; + state->Init_Ctrl[4].val[1] = 0; + state->Init_Ctrl[4].addr[2] = 53; + state->Init_Ctrl[4].bit[2] = 7; + state->Init_Ctrl[4].val[2] = 1; + + state->Init_Ctrl[5].Ctrl_Num = BB_IQSWAP ; + state->Init_Ctrl[5].size = 1 ; + state->Init_Ctrl[5].addr[0] = 59; + state->Init_Ctrl[5].bit[0] = 0; + state->Init_Ctrl[5].val[0] = 0; + + state->Init_Ctrl[6].Ctrl_Num = BB_DLPF_BANDSEL ; + state->Init_Ctrl[6].size = 2 ; + state->Init_Ctrl[6].addr[0] = 53; + state->Init_Ctrl[6].bit[0] = 3; + state->Init_Ctrl[6].val[0] = 0; + state->Init_Ctrl[6].addr[1] = 53; + state->Init_Ctrl[6].bit[1] = 4; + state->Init_Ctrl[6].val[1] = 1; + + state->Init_Ctrl[7].Ctrl_Num = RFSYN_CHP_GAIN ; + state->Init_Ctrl[7].size = 4 ; + state->Init_Ctrl[7].addr[0] = 22; + state->Init_Ctrl[7].bit[0] = 4; + state->Init_Ctrl[7].val[0] = 0; + state->Init_Ctrl[7].addr[1] = 22; + state->Init_Ctrl[7].bit[1] = 5; + state->Init_Ctrl[7].val[1] = 1; + state->Init_Ctrl[7].addr[2] = 22; + state->Init_Ctrl[7].bit[2] = 6; + state->Init_Ctrl[7].val[2] = 1; + state->Init_Ctrl[7].addr[3] = 22; + state->Init_Ctrl[7].bit[3] = 7; + state->Init_Ctrl[7].val[3] = 0; + + state->Init_Ctrl[8].Ctrl_Num = RFSYN_EN_CHP_HIGAIN ; + state->Init_Ctrl[8].size = 1 ; + state->Init_Ctrl[8].addr[0] = 22; + state->Init_Ctrl[8].bit[0] = 2; + state->Init_Ctrl[8].val[0] = 0; + + state->Init_Ctrl[9].Ctrl_Num = AGC_IF ; + state->Init_Ctrl[9].size = 4 ; + state->Init_Ctrl[9].addr[0] = 76; + state->Init_Ctrl[9].bit[0] = 0; + state->Init_Ctrl[9].val[0] = 1; + state->Init_Ctrl[9].addr[1] = 76; + state->Init_Ctrl[9].bit[1] = 1; + state->Init_Ctrl[9].val[1] = 1; + state->Init_Ctrl[9].addr[2] = 76; + state->Init_Ctrl[9].bit[2] = 2; + state->Init_Ctrl[9].val[2] = 0; + state->Init_Ctrl[9].addr[3] = 76; + state->Init_Ctrl[9].bit[3] = 3; + state->Init_Ctrl[9].val[3] = 1; + + state->Init_Ctrl[10].Ctrl_Num = AGC_RF ; + state->Init_Ctrl[10].size = 4 ; + state->Init_Ctrl[10].addr[0] = 76; + state->Init_Ctrl[10].bit[0] = 4; + state->Init_Ctrl[10].val[0] = 1; + state->Init_Ctrl[10].addr[1] = 76; + state->Init_Ctrl[10].bit[1] = 5; + state->Init_Ctrl[10].val[1] = 1; + state->Init_Ctrl[10].addr[2] = 76; + state->Init_Ctrl[10].bit[2] = 6; + state->Init_Ctrl[10].val[2] = 0; + state->Init_Ctrl[10].addr[3] = 76; + state->Init_Ctrl[10].bit[3] = 7; + state->Init_Ctrl[10].val[3] = 1; + + state->Init_Ctrl[11].Ctrl_Num = IF_DIVVAL ; + state->Init_Ctrl[11].size = 5 ; + state->Init_Ctrl[11].addr[0] = 43; + state->Init_Ctrl[11].bit[0] = 3; + state->Init_Ctrl[11].val[0] = 0; + state->Init_Ctrl[11].addr[1] = 43; + state->Init_Ctrl[11].bit[1] = 4; + state->Init_Ctrl[11].val[1] = 0; + state->Init_Ctrl[11].addr[2] = 43; + state->Init_Ctrl[11].bit[2] = 5; + state->Init_Ctrl[11].val[2] = 0; + state->Init_Ctrl[11].addr[3] = 43; + state->Init_Ctrl[11].bit[3] = 6; + state->Init_Ctrl[11].val[3] = 1; + state->Init_Ctrl[11].addr[4] = 43; + state->Init_Ctrl[11].bit[4] = 7; + state->Init_Ctrl[11].val[4] = 0; + + state->Init_Ctrl[12].Ctrl_Num = IF_VCO_BIAS ; + state->Init_Ctrl[12].size = 6 ; + state->Init_Ctrl[12].addr[0] = 44; + state->Init_Ctrl[12].bit[0] = 2; + state->Init_Ctrl[12].val[0] = 0; + state->Init_Ctrl[12].addr[1] = 44; + state->Init_Ctrl[12].bit[1] = 3; + state->Init_Ctrl[12].val[1] = 0; + state->Init_Ctrl[12].addr[2] = 44; + state->Init_Ctrl[12].bit[2] = 4; + state->Init_Ctrl[12].val[2] = 0; + state->Init_Ctrl[12].addr[3] = 44; + state->Init_Ctrl[12].bit[3] = 5; + state->Init_Ctrl[12].val[3] = 1; + state->Init_Ctrl[12].addr[4] = 44; + state->Init_Ctrl[12].bit[4] = 6; + state->Init_Ctrl[12].val[4] = 0; + state->Init_Ctrl[12].addr[5] = 44; + state->Init_Ctrl[12].bit[5] = 7; + state->Init_Ctrl[12].val[5] = 0; + + state->Init_Ctrl[13].Ctrl_Num = CHCAL_INT_MOD_IF ; + state->Init_Ctrl[13].size = 7 ; + state->Init_Ctrl[13].addr[0] = 11; + state->Init_Ctrl[13].bit[0] = 0; + state->Init_Ctrl[13].val[0] = 1; + state->Init_Ctrl[13].addr[1] = 11; + state->Init_Ctrl[13].bit[1] = 1; + state->Init_Ctrl[13].val[1] = 0; + state->Init_Ctrl[13].addr[2] = 11; + state->Init_Ctrl[13].bit[2] = 2; + state->Init_Ctrl[13].val[2] = 0; + state->Init_Ctrl[13].addr[3] = 11; + state->Init_Ctrl[13].bit[3] = 3; + state->Init_Ctrl[13].val[3] = 1; + state->Init_Ctrl[13].addr[4] = 11; + state->Init_Ctrl[13].bit[4] = 4; + state->Init_Ctrl[13].val[4] = 1; + state->Init_Ctrl[13].addr[5] = 11; + state->Init_Ctrl[13].bit[5] = 5; + state->Init_Ctrl[13].val[5] = 0; + state->Init_Ctrl[13].addr[6] = 11; + state->Init_Ctrl[13].bit[6] = 6; + state->Init_Ctrl[13].val[6] = 0; + + state->Init_Ctrl[14].Ctrl_Num = CHCAL_FRAC_MOD_IF ; + state->Init_Ctrl[14].size = 16 ; + state->Init_Ctrl[14].addr[0] = 13; + state->Init_Ctrl[14].bit[0] = 0; + state->Init_Ctrl[14].val[0] = 0; + state->Init_Ctrl[14].addr[1] = 13; + state->Init_Ctrl[14].bit[1] = 1; + state->Init_Ctrl[14].val[1] = 0; + state->Init_Ctrl[14].addr[2] = 13; + state->Init_Ctrl[14].bit[2] = 2; + state->Init_Ctrl[14].val[2] = 0; + state->Init_Ctrl[14].addr[3] = 13; + state->Init_Ctrl[14].bit[3] = 3; + state->Init_Ctrl[14].val[3] = 0; + state->Init_Ctrl[14].addr[4] = 13; + state->Init_Ctrl[14].bit[4] = 4; + state->Init_Ctrl[14].val[4] = 0; + state->Init_Ctrl[14].addr[5] = 13; + state->Init_Ctrl[14].bit[5] = 5; + state->Init_Ctrl[14].val[5] = 0; + state->Init_Ctrl[14].addr[6] = 13; + state->Init_Ctrl[14].bit[6] = 6; + state->Init_Ctrl[14].val[6] = 0; + state->Init_Ctrl[14].addr[7] = 13; + state->Init_Ctrl[14].bit[7] = 7; + state->Init_Ctrl[14].val[7] = 0; + state->Init_Ctrl[14].addr[8] = 12; + state->Init_Ctrl[14].bit[8] = 0; + state->Init_Ctrl[14].val[8] = 0; + state->Init_Ctrl[14].addr[9] = 12; + state->Init_Ctrl[14].bit[9] = 1; + state->Init_Ctrl[14].val[9] = 0; + state->Init_Ctrl[14].addr[10] = 12; + state->Init_Ctrl[14].bit[10] = 2; + state->Init_Ctrl[14].val[10] = 0; + state->Init_Ctrl[14].addr[11] = 12; + state->Init_Ctrl[14].bit[11] = 3; + state->Init_Ctrl[14].val[11] = 0; + state->Init_Ctrl[14].addr[12] = 12; + state->Init_Ctrl[14].bit[12] = 4; + state->Init_Ctrl[14].val[12] = 0; + state->Init_Ctrl[14].addr[13] = 12; + state->Init_Ctrl[14].bit[13] = 5; + state->Init_Ctrl[14].val[13] = 1; + state->Init_Ctrl[14].addr[14] = 12; + state->Init_Ctrl[14].bit[14] = 6; + state->Init_Ctrl[14].val[14] = 1; + state->Init_Ctrl[14].addr[15] = 12; + state->Init_Ctrl[14].bit[15] = 7; + state->Init_Ctrl[14].val[15] = 0; + + state->Init_Ctrl[15].Ctrl_Num = DRV_RES_SEL ; + state->Init_Ctrl[15].size = 3 ; + state->Init_Ctrl[15].addr[0] = 147; + state->Init_Ctrl[15].bit[0] = 2; + state->Init_Ctrl[15].val[0] = 0; + state->Init_Ctrl[15].addr[1] = 147; + state->Init_Ctrl[15].bit[1] = 3; + state->Init_Ctrl[15].val[1] = 1; + state->Init_Ctrl[15].addr[2] = 147; + state->Init_Ctrl[15].bit[2] = 4; + state->Init_Ctrl[15].val[2] = 1; + + state->Init_Ctrl[16].Ctrl_Num = I_DRIVER ; + state->Init_Ctrl[16].size = 2 ; + state->Init_Ctrl[16].addr[0] = 147; + state->Init_Ctrl[16].bit[0] = 0; + state->Init_Ctrl[16].val[0] = 0; + state->Init_Ctrl[16].addr[1] = 147; + state->Init_Ctrl[16].bit[1] = 1; + state->Init_Ctrl[16].val[1] = 1; + + state->Init_Ctrl[17].Ctrl_Num = EN_AAF ; + state->Init_Ctrl[17].size = 1 ; + state->Init_Ctrl[17].addr[0] = 147; + state->Init_Ctrl[17].bit[0] = 7; + state->Init_Ctrl[17].val[0] = 0; + + state->Init_Ctrl[18].Ctrl_Num = EN_3P ; + state->Init_Ctrl[18].size = 1 ; + state->Init_Ctrl[18].addr[0] = 147; + state->Init_Ctrl[18].bit[0] = 6; + state->Init_Ctrl[18].val[0] = 0; + + state->Init_Ctrl[19].Ctrl_Num = EN_AUX_3P ; + state->Init_Ctrl[19].size = 1 ; + state->Init_Ctrl[19].addr[0] = 156; + state->Init_Ctrl[19].bit[0] = 0; + state->Init_Ctrl[19].val[0] = 0; + + state->Init_Ctrl[20].Ctrl_Num = SEL_AAF_BAND ; + state->Init_Ctrl[20].size = 1 ; + state->Init_Ctrl[20].addr[0] = 147; + state->Init_Ctrl[20].bit[0] = 5; + state->Init_Ctrl[20].val[0] = 0; + + state->Init_Ctrl[21].Ctrl_Num = SEQ_ENCLK16_CLK_OUT ; + state->Init_Ctrl[21].size = 1 ; + state->Init_Ctrl[21].addr[0] = 137; + state->Init_Ctrl[21].bit[0] = 4; + state->Init_Ctrl[21].val[0] = 0; + + state->Init_Ctrl[22].Ctrl_Num = SEQ_SEL4_16B ; + state->Init_Ctrl[22].size = 1 ; + state->Init_Ctrl[22].addr[0] = 137; + state->Init_Ctrl[22].bit[0] = 7; + state->Init_Ctrl[22].val[0] = 0; + + state->Init_Ctrl[23].Ctrl_Num = XTAL_CAPSELECT ; + state->Init_Ctrl[23].size = 1 ; + state->Init_Ctrl[23].addr[0] = 91; + state->Init_Ctrl[23].bit[0] = 5; + state->Init_Ctrl[23].val[0] = 1; + + state->Init_Ctrl[24].Ctrl_Num = IF_SEL_DBL ; + state->Init_Ctrl[24].size = 1 ; + state->Init_Ctrl[24].addr[0] = 43; + state->Init_Ctrl[24].bit[0] = 0; + state->Init_Ctrl[24].val[0] = 1; + + state->Init_Ctrl[25].Ctrl_Num = RFSYN_R_DIV ; + state->Init_Ctrl[25].size = 2 ; + state->Init_Ctrl[25].addr[0] = 22; + state->Init_Ctrl[25].bit[0] = 0; + state->Init_Ctrl[25].val[0] = 1; + state->Init_Ctrl[25].addr[1] = 22; + state->Init_Ctrl[25].bit[1] = 1; + state->Init_Ctrl[25].val[1] = 1; + + state->Init_Ctrl[26].Ctrl_Num = SEQ_EXTSYNTHCALIF ; + state->Init_Ctrl[26].size = 1 ; + state->Init_Ctrl[26].addr[0] = 134; + state->Init_Ctrl[26].bit[0] = 2; + state->Init_Ctrl[26].val[0] = 0; + + state->Init_Ctrl[27].Ctrl_Num = SEQ_EXTDCCAL ; + state->Init_Ctrl[27].size = 1 ; + state->Init_Ctrl[27].addr[0] = 137; + state->Init_Ctrl[27].bit[0] = 3; + state->Init_Ctrl[27].val[0] = 0; + + state->Init_Ctrl[28].Ctrl_Num = AGC_EN_RSSI ; + state->Init_Ctrl[28].size = 1 ; + state->Init_Ctrl[28].addr[0] = 77; + state->Init_Ctrl[28].bit[0] = 7; + state->Init_Ctrl[28].val[0] = 0; + + state->Init_Ctrl[29].Ctrl_Num = RFA_ENCLKRFAGC ; + state->Init_Ctrl[29].size = 1 ; + state->Init_Ctrl[29].addr[0] = 166; + state->Init_Ctrl[29].bit[0] = 7; + state->Init_Ctrl[29].val[0] = 1; + + state->Init_Ctrl[30].Ctrl_Num = RFA_RSSI_REFH ; + state->Init_Ctrl[30].size = 3 ; + state->Init_Ctrl[30].addr[0] = 166; + state->Init_Ctrl[30].bit[0] = 0; + state->Init_Ctrl[30].val[0] = 0; + state->Init_Ctrl[30].addr[1] = 166; + state->Init_Ctrl[30].bit[1] = 1; + state->Init_Ctrl[30].val[1] = 1; + state->Init_Ctrl[30].addr[2] = 166; + state->Init_Ctrl[30].bit[2] = 2; + state->Init_Ctrl[30].val[2] = 1; + + state->Init_Ctrl[31].Ctrl_Num = RFA_RSSI_REF ; + state->Init_Ctrl[31].size = 3 ; + state->Init_Ctrl[31].addr[0] = 166; + state->Init_Ctrl[31].bit[0] = 3; + state->Init_Ctrl[31].val[0] = 1; + state->Init_Ctrl[31].addr[1] = 166; + state->Init_Ctrl[31].bit[1] = 4; + state->Init_Ctrl[31].val[1] = 0; + state->Init_Ctrl[31].addr[2] = 166; + state->Init_Ctrl[31].bit[2] = 5; + state->Init_Ctrl[31].val[2] = 1; + + state->Init_Ctrl[32].Ctrl_Num = RFA_RSSI_REFL ; + state->Init_Ctrl[32].size = 3 ; + state->Init_Ctrl[32].addr[0] = 167; + state->Init_Ctrl[32].bit[0] = 0; + state->Init_Ctrl[32].val[0] = 1; + state->Init_Ctrl[32].addr[1] = 167; + state->Init_Ctrl[32].bit[1] = 1; + state->Init_Ctrl[32].val[1] = 1; + state->Init_Ctrl[32].addr[2] = 167; + state->Init_Ctrl[32].bit[2] = 2; + state->Init_Ctrl[32].val[2] = 0; + + state->Init_Ctrl[33].Ctrl_Num = RFA_FLR ; + state->Init_Ctrl[33].size = 4 ; + state->Init_Ctrl[33].addr[0] = 168; + state->Init_Ctrl[33].bit[0] = 0; + state->Init_Ctrl[33].val[0] = 0; + state->Init_Ctrl[33].addr[1] = 168; + state->Init_Ctrl[33].bit[1] = 1; + state->Init_Ctrl[33].val[1] = 1; + state->Init_Ctrl[33].addr[2] = 168; + state->Init_Ctrl[33].bit[2] = 2; + state->Init_Ctrl[33].val[2] = 0; + state->Init_Ctrl[33].addr[3] = 168; + state->Init_Ctrl[33].bit[3] = 3; + state->Init_Ctrl[33].val[3] = 0; + + state->Init_Ctrl[34].Ctrl_Num = RFA_CEIL ; + state->Init_Ctrl[34].size = 4 ; + state->Init_Ctrl[34].addr[0] = 168; + state->Init_Ctrl[34].bit[0] = 4; + state->Init_Ctrl[34].val[0] = 1; + state->Init_Ctrl[34].addr[1] = 168; + state->Init_Ctrl[34].bit[1] = 5; + state->Init_Ctrl[34].val[1] = 1; + state->Init_Ctrl[34].addr[2] = 168; + state->Init_Ctrl[34].bit[2] = 6; + state->Init_Ctrl[34].val[2] = 1; + state->Init_Ctrl[34].addr[3] = 168; + state->Init_Ctrl[34].bit[3] = 7; + state->Init_Ctrl[34].val[3] = 1; + + state->Init_Ctrl[35].Ctrl_Num = SEQ_EXTIQFSMPULSE ; + state->Init_Ctrl[35].size = 1 ; + state->Init_Ctrl[35].addr[0] = 135; + state->Init_Ctrl[35].bit[0] = 0; + state->Init_Ctrl[35].val[0] = 0; + + state->Init_Ctrl[36].Ctrl_Num = OVERRIDE_1 ; + state->Init_Ctrl[36].size = 1 ; + state->Init_Ctrl[36].addr[0] = 56; + state->Init_Ctrl[36].bit[0] = 3; + state->Init_Ctrl[36].val[0] = 0; + + state->Init_Ctrl[37].Ctrl_Num = BB_INITSTATE_DLPF_TUNE ; + state->Init_Ctrl[37].size = 7 ; + state->Init_Ctrl[37].addr[0] = 59; + state->Init_Ctrl[37].bit[0] = 1; + state->Init_Ctrl[37].val[0] = 0; + state->Init_Ctrl[37].addr[1] = 59; + state->Init_Ctrl[37].bit[1] = 2; + state->Init_Ctrl[37].val[1] = 0; + state->Init_Ctrl[37].addr[2] = 59; + state->Init_Ctrl[37].bit[2] = 3; + state->Init_Ctrl[37].val[2] = 0; + state->Init_Ctrl[37].addr[3] = 59; + state->Init_Ctrl[37].bit[3] = 4; + state->Init_Ctrl[37].val[3] = 0; + state->Init_Ctrl[37].addr[4] = 59; + state->Init_Ctrl[37].bit[4] = 5; + state->Init_Ctrl[37].val[4] = 0; + state->Init_Ctrl[37].addr[5] = 59; + state->Init_Ctrl[37].bit[5] = 6; + state->Init_Ctrl[37].val[5] = 0; + state->Init_Ctrl[37].addr[6] = 59; + state->Init_Ctrl[37].bit[6] = 7; + state->Init_Ctrl[37].val[6] = 0; + + state->Init_Ctrl[38].Ctrl_Num = TG_R_DIV ; + state->Init_Ctrl[38].size = 6 ; + state->Init_Ctrl[38].addr[0] = 32; + state->Init_Ctrl[38].bit[0] = 2; + state->Init_Ctrl[38].val[0] = 0; + state->Init_Ctrl[38].addr[1] = 32; + state->Init_Ctrl[38].bit[1] = 3; + state->Init_Ctrl[38].val[1] = 0; + state->Init_Ctrl[38].addr[2] = 32; + state->Init_Ctrl[38].bit[2] = 4; + state->Init_Ctrl[38].val[2] = 0; + state->Init_Ctrl[38].addr[3] = 32; + state->Init_Ctrl[38].bit[3] = 5; + state->Init_Ctrl[38].val[3] = 0; + state->Init_Ctrl[38].addr[4] = 32; + state->Init_Ctrl[38].bit[4] = 6; + state->Init_Ctrl[38].val[4] = 1; + state->Init_Ctrl[38].addr[5] = 32; + state->Init_Ctrl[38].bit[5] = 7; + state->Init_Ctrl[38].val[5] = 0; + + state->Init_Ctrl[39].Ctrl_Num = EN_CHP_LIN_B ; + state->Init_Ctrl[39].size = 1 ; + state->Init_Ctrl[39].addr[0] = 25; + state->Init_Ctrl[39].bit[0] = 3; + state->Init_Ctrl[39].val[0] = 1; + + + state->CH_Ctrl_Num = CHCTRL_NUM ; + + state->CH_Ctrl[0].Ctrl_Num = DN_POLY ; + state->CH_Ctrl[0].size = 2 ; + state->CH_Ctrl[0].addr[0] = 68; + state->CH_Ctrl[0].bit[0] = 6; + state->CH_Ctrl[0].val[0] = 1; + state->CH_Ctrl[0].addr[1] = 68; + state->CH_Ctrl[0].bit[1] = 7; + state->CH_Ctrl[0].val[1] = 1; + + state->CH_Ctrl[1].Ctrl_Num = DN_RFGAIN ; + state->CH_Ctrl[1].size = 2 ; + state->CH_Ctrl[1].addr[0] = 70; + state->CH_Ctrl[1].bit[0] = 6; + state->CH_Ctrl[1].val[0] = 1; + state->CH_Ctrl[1].addr[1] = 70; + state->CH_Ctrl[1].bit[1] = 7; + state->CH_Ctrl[1].val[1] = 0; + + state->CH_Ctrl[2].Ctrl_Num = DN_CAP_RFLPF ; + state->CH_Ctrl[2].size = 9 ; + state->CH_Ctrl[2].addr[0] = 69; + state->CH_Ctrl[2].bit[0] = 5; + state->CH_Ctrl[2].val[0] = 0; + state->CH_Ctrl[2].addr[1] = 69; + state->CH_Ctrl[2].bit[1] = 6; + state->CH_Ctrl[2].val[1] = 0; + state->CH_Ctrl[2].addr[2] = 69; + state->CH_Ctrl[2].bit[2] = 7; + state->CH_Ctrl[2].val[2] = 0; + state->CH_Ctrl[2].addr[3] = 68; + state->CH_Ctrl[2].bit[3] = 0; + state->CH_Ctrl[2].val[3] = 0; + state->CH_Ctrl[2].addr[4] = 68; + state->CH_Ctrl[2].bit[4] = 1; + state->CH_Ctrl[2].val[4] = 0; + state->CH_Ctrl[2].addr[5] = 68; + state->CH_Ctrl[2].bit[5] = 2; + state->CH_Ctrl[2].val[5] = 0; + state->CH_Ctrl[2].addr[6] = 68; + state->CH_Ctrl[2].bit[6] = 3; + state->CH_Ctrl[2].val[6] = 0; + state->CH_Ctrl[2].addr[7] = 68; + state->CH_Ctrl[2].bit[7] = 4; + state->CH_Ctrl[2].val[7] = 0; + state->CH_Ctrl[2].addr[8] = 68; + state->CH_Ctrl[2].bit[8] = 5; + state->CH_Ctrl[2].val[8] = 0; + + state->CH_Ctrl[3].Ctrl_Num = DN_EN_VHFUHFBAR ; + state->CH_Ctrl[3].size = 1 ; + state->CH_Ctrl[3].addr[0] = 70; + state->CH_Ctrl[3].bit[0] = 5; + state->CH_Ctrl[3].val[0] = 0; + + state->CH_Ctrl[4].Ctrl_Num = DN_GAIN_ADJUST ; + state->CH_Ctrl[4].size = 3 ; + state->CH_Ctrl[4].addr[0] = 73; + state->CH_Ctrl[4].bit[0] = 4; + state->CH_Ctrl[4].val[0] = 0; + state->CH_Ctrl[4].addr[1] = 73; + state->CH_Ctrl[4].bit[1] = 5; + state->CH_Ctrl[4].val[1] = 1; + state->CH_Ctrl[4].addr[2] = 73; + state->CH_Ctrl[4].bit[2] = 6; + state->CH_Ctrl[4].val[2] = 0; + + state->CH_Ctrl[5].Ctrl_Num = DN_IQTNBUF_AMP ; + state->CH_Ctrl[5].size = 4 ; + state->CH_Ctrl[5].addr[0] = 70; + state->CH_Ctrl[5].bit[0] = 0; + state->CH_Ctrl[5].val[0] = 0; + state->CH_Ctrl[5].addr[1] = 70; + state->CH_Ctrl[5].bit[1] = 1; + state->CH_Ctrl[5].val[1] = 0; + state->CH_Ctrl[5].addr[2] = 70; + state->CH_Ctrl[5].bit[2] = 2; + state->CH_Ctrl[5].val[2] = 0; + state->CH_Ctrl[5].addr[3] = 70; + state->CH_Ctrl[5].bit[3] = 3; + state->CH_Ctrl[5].val[3] = 0; + + state->CH_Ctrl[6].Ctrl_Num = DN_IQTNGNBFBIAS_BST ; + state->CH_Ctrl[6].size = 1 ; + state->CH_Ctrl[6].addr[0] = 70; + state->CH_Ctrl[6].bit[0] = 4; + state->CH_Ctrl[6].val[0] = 1; + + state->CH_Ctrl[7].Ctrl_Num = RFSYN_EN_OUTMUX ; + state->CH_Ctrl[7].size = 1 ; + state->CH_Ctrl[7].addr[0] = 111; + state->CH_Ctrl[7].bit[0] = 4; + state->CH_Ctrl[7].val[0] = 0; + + state->CH_Ctrl[8].Ctrl_Num = RFSYN_SEL_VCO_OUT ; + state->CH_Ctrl[8].size = 1 ; + state->CH_Ctrl[8].addr[0] = 111; + state->CH_Ctrl[8].bit[0] = 7; + state->CH_Ctrl[8].val[0] = 1; + + state->CH_Ctrl[9].Ctrl_Num = RFSYN_SEL_VCO_HI ; + state->CH_Ctrl[9].size = 1 ; + state->CH_Ctrl[9].addr[0] = 111; + state->CH_Ctrl[9].bit[0] = 6; + state->CH_Ctrl[9].val[0] = 1; + + state->CH_Ctrl[10].Ctrl_Num = RFSYN_SEL_DIVM ; + state->CH_Ctrl[10].size = 1 ; + state->CH_Ctrl[10].addr[0] = 111; + state->CH_Ctrl[10].bit[0] = 5; + state->CH_Ctrl[10].val[0] = 0; + + state->CH_Ctrl[11].Ctrl_Num = RFSYN_RF_DIV_BIAS ; + state->CH_Ctrl[11].size = 2 ; + state->CH_Ctrl[11].addr[0] = 110; + state->CH_Ctrl[11].bit[0] = 0; + state->CH_Ctrl[11].val[0] = 1; + state->CH_Ctrl[11].addr[1] = 110; + state->CH_Ctrl[11].bit[1] = 1; + state->CH_Ctrl[11].val[1] = 0; + + state->CH_Ctrl[12].Ctrl_Num = DN_SEL_FREQ ; + state->CH_Ctrl[12].size = 3 ; + state->CH_Ctrl[12].addr[0] = 69; + state->CH_Ctrl[12].bit[0] = 2; + state->CH_Ctrl[12].val[0] = 0; + state->CH_Ctrl[12].addr[1] = 69; + state->CH_Ctrl[12].bit[1] = 3; + state->CH_Ctrl[12].val[1] = 0; + state->CH_Ctrl[12].addr[2] = 69; + state->CH_Ctrl[12].bit[2] = 4; + state->CH_Ctrl[12].val[2] = 0; + + state->CH_Ctrl[13].Ctrl_Num = RFSYN_VCO_BIAS ; + state->CH_Ctrl[13].size = 6 ; + state->CH_Ctrl[13].addr[0] = 110; + state->CH_Ctrl[13].bit[0] = 2; + state->CH_Ctrl[13].val[0] = 0; + state->CH_Ctrl[13].addr[1] = 110; + state->CH_Ctrl[13].bit[1] = 3; + state->CH_Ctrl[13].val[1] = 0; + state->CH_Ctrl[13].addr[2] = 110; + state->CH_Ctrl[13].bit[2] = 4; + state->CH_Ctrl[13].val[2] = 0; + state->CH_Ctrl[13].addr[3] = 110; + state->CH_Ctrl[13].bit[3] = 5; + state->CH_Ctrl[13].val[3] = 0; + state->CH_Ctrl[13].addr[4] = 110; + state->CH_Ctrl[13].bit[4] = 6; + state->CH_Ctrl[13].val[4] = 0; + state->CH_Ctrl[13].addr[5] = 110; + state->CH_Ctrl[13].bit[5] = 7; + state->CH_Ctrl[13].val[5] = 1; + + state->CH_Ctrl[14].Ctrl_Num = CHCAL_INT_MOD_RF ; + state->CH_Ctrl[14].size = 7 ; + state->CH_Ctrl[14].addr[0] = 14; + state->CH_Ctrl[14].bit[0] = 0; + state->CH_Ctrl[14].val[0] = 0; + state->CH_Ctrl[14].addr[1] = 14; + state->CH_Ctrl[14].bit[1] = 1; + state->CH_Ctrl[14].val[1] = 0; + state->CH_Ctrl[14].addr[2] = 14; + state->CH_Ctrl[14].bit[2] = 2; + state->CH_Ctrl[14].val[2] = 0; + state->CH_Ctrl[14].addr[3] = 14; + state->CH_Ctrl[14].bit[3] = 3; + state->CH_Ctrl[14].val[3] = 0; + state->CH_Ctrl[14].addr[4] = 14; + state->CH_Ctrl[14].bit[4] = 4; + state->CH_Ctrl[14].val[4] = 0; + state->CH_Ctrl[14].addr[5] = 14; + state->CH_Ctrl[14].bit[5] = 5; + state->CH_Ctrl[14].val[5] = 0; + state->CH_Ctrl[14].addr[6] = 14; + state->CH_Ctrl[14].bit[6] = 6; + state->CH_Ctrl[14].val[6] = 0; + + state->CH_Ctrl[15].Ctrl_Num = CHCAL_FRAC_MOD_RF ; + state->CH_Ctrl[15].size = 18 ; + state->CH_Ctrl[15].addr[0] = 17; + state->CH_Ctrl[15].bit[0] = 6; + state->CH_Ctrl[15].val[0] = 0; + state->CH_Ctrl[15].addr[1] = 17; + state->CH_Ctrl[15].bit[1] = 7; + state->CH_Ctrl[15].val[1] = 0; + state->CH_Ctrl[15].addr[2] = 16; + state->CH_Ctrl[15].bit[2] = 0; + state->CH_Ctrl[15].val[2] = 0; + state->CH_Ctrl[15].addr[3] = 16; + state->CH_Ctrl[15].bit[3] = 1; + state->CH_Ctrl[15].val[3] = 0; + state->CH_Ctrl[15].addr[4] = 16; + state->CH_Ctrl[15].bit[4] = 2; + state->CH_Ctrl[15].val[4] = 0; + state->CH_Ctrl[15].addr[5] = 16; + state->CH_Ctrl[15].bit[5] = 3; + state->CH_Ctrl[15].val[5] = 0; + state->CH_Ctrl[15].addr[6] = 16; + state->CH_Ctrl[15].bit[6] = 4; + state->CH_Ctrl[15].val[6] = 0; + state->CH_Ctrl[15].addr[7] = 16; + state->CH_Ctrl[15].bit[7] = 5; + state->CH_Ctrl[15].val[7] = 0; + state->CH_Ctrl[15].addr[8] = 16; + state->CH_Ctrl[15].bit[8] = 6; + state->CH_Ctrl[15].val[8] = 0; + state->CH_Ctrl[15].addr[9] = 16; + state->CH_Ctrl[15].bit[9] = 7; + state->CH_Ctrl[15].val[9] = 0; + state->CH_Ctrl[15].addr[10] = 15; + state->CH_Ctrl[15].bit[10] = 0; + state->CH_Ctrl[15].val[10] = 0; + state->CH_Ctrl[15].addr[11] = 15; + state->CH_Ctrl[15].bit[11] = 1; + state->CH_Ctrl[15].val[11] = 0; + state->CH_Ctrl[15].addr[12] = 15; + state->CH_Ctrl[15].bit[12] = 2; + state->CH_Ctrl[15].val[12] = 0; + state->CH_Ctrl[15].addr[13] = 15; + state->CH_Ctrl[15].bit[13] = 3; + state->CH_Ctrl[15].val[13] = 0; + state->CH_Ctrl[15].addr[14] = 15; + state->CH_Ctrl[15].bit[14] = 4; + state->CH_Ctrl[15].val[14] = 0; + state->CH_Ctrl[15].addr[15] = 15; + state->CH_Ctrl[15].bit[15] = 5; + state->CH_Ctrl[15].val[15] = 0; + state->CH_Ctrl[15].addr[16] = 15; + state->CH_Ctrl[15].bit[16] = 6; + state->CH_Ctrl[15].val[16] = 1; + state->CH_Ctrl[15].addr[17] = 15; + state->CH_Ctrl[15].bit[17] = 7; + state->CH_Ctrl[15].val[17] = 1; + + state->CH_Ctrl[16].Ctrl_Num = RFSYN_LPF_R ; + state->CH_Ctrl[16].size = 5 ; + state->CH_Ctrl[16].addr[0] = 112; + state->CH_Ctrl[16].bit[0] = 0; + state->CH_Ctrl[16].val[0] = 0; + state->CH_Ctrl[16].addr[1] = 112; + state->CH_Ctrl[16].bit[1] = 1; + state->CH_Ctrl[16].val[1] = 0; + state->CH_Ctrl[16].addr[2] = 112; + state->CH_Ctrl[16].bit[2] = 2; + state->CH_Ctrl[16].val[2] = 0; + state->CH_Ctrl[16].addr[3] = 112; + state->CH_Ctrl[16].bit[3] = 3; + state->CH_Ctrl[16].val[3] = 0; + state->CH_Ctrl[16].addr[4] = 112; + state->CH_Ctrl[16].bit[4] = 4; + state->CH_Ctrl[16].val[4] = 1; + + state->CH_Ctrl[17].Ctrl_Num = CHCAL_EN_INT_RF ; + state->CH_Ctrl[17].size = 1 ; + state->CH_Ctrl[17].addr[0] = 14; + state->CH_Ctrl[17].bit[0] = 7; + state->CH_Ctrl[17].val[0] = 0; + + state->CH_Ctrl[18].Ctrl_Num = TG_LO_DIVVAL ; + state->CH_Ctrl[18].size = 4 ; + state->CH_Ctrl[18].addr[0] = 107; + state->CH_Ctrl[18].bit[0] = 3; + state->CH_Ctrl[18].val[0] = 0; + state->CH_Ctrl[18].addr[1] = 107; + state->CH_Ctrl[18].bit[1] = 4; + state->CH_Ctrl[18].val[1] = 0; + state->CH_Ctrl[18].addr[2] = 107; + state->CH_Ctrl[18].bit[2] = 5; + state->CH_Ctrl[18].val[2] = 0; + state->CH_Ctrl[18].addr[3] = 107; + state->CH_Ctrl[18].bit[3] = 6; + state->CH_Ctrl[18].val[3] = 0; + + state->CH_Ctrl[19].Ctrl_Num = TG_LO_SELVAL ; + state->CH_Ctrl[19].size = 3 ; + state->CH_Ctrl[19].addr[0] = 107; + state->CH_Ctrl[19].bit[0] = 7; + state->CH_Ctrl[19].val[0] = 1; + state->CH_Ctrl[19].addr[1] = 106; + state->CH_Ctrl[19].bit[1] = 0; + state->CH_Ctrl[19].val[1] = 1; + state->CH_Ctrl[19].addr[2] = 106; + state->CH_Ctrl[19].bit[2] = 1; + state->CH_Ctrl[19].val[2] = 1; + + state->CH_Ctrl[20].Ctrl_Num = TG_DIV_VAL ; + state->CH_Ctrl[20].size = 11 ; + state->CH_Ctrl[20].addr[0] = 109; + state->CH_Ctrl[20].bit[0] = 2; + state->CH_Ctrl[20].val[0] = 0; + state->CH_Ctrl[20].addr[1] = 109; + state->CH_Ctrl[20].bit[1] = 3; + state->CH_Ctrl[20].val[1] = 0; + state->CH_Ctrl[20].addr[2] = 109; + state->CH_Ctrl[20].bit[2] = 4; + state->CH_Ctrl[20].val[2] = 0; + state->CH_Ctrl[20].addr[3] = 109; + state->CH_Ctrl[20].bit[3] = 5; + state->CH_Ctrl[20].val[3] = 0; + state->CH_Ctrl[20].addr[4] = 109; + state->CH_Ctrl[20].bit[4] = 6; + state->CH_Ctrl[20].val[4] = 0; + state->CH_Ctrl[20].addr[5] = 109; + state->CH_Ctrl[20].bit[5] = 7; + state->CH_Ctrl[20].val[5] = 0; + state->CH_Ctrl[20].addr[6] = 108; + state->CH_Ctrl[20].bit[6] = 0; + state->CH_Ctrl[20].val[6] = 0; + state->CH_Ctrl[20].addr[7] = 108; + state->CH_Ctrl[20].bit[7] = 1; + state->CH_Ctrl[20].val[7] = 0; + state->CH_Ctrl[20].addr[8] = 108; + state->CH_Ctrl[20].bit[8] = 2; + state->CH_Ctrl[20].val[8] = 1; + state->CH_Ctrl[20].addr[9] = 108; + state->CH_Ctrl[20].bit[9] = 3; + state->CH_Ctrl[20].val[9] = 1; + state->CH_Ctrl[20].addr[10] = 108; + state->CH_Ctrl[20].bit[10] = 4; + state->CH_Ctrl[20].val[10] = 1; + + state->CH_Ctrl[21].Ctrl_Num = TG_VCO_BIAS ; + state->CH_Ctrl[21].size = 6 ; + state->CH_Ctrl[21].addr[0] = 106; + state->CH_Ctrl[21].bit[0] = 2; + state->CH_Ctrl[21].val[0] = 0; + state->CH_Ctrl[21].addr[1] = 106; + state->CH_Ctrl[21].bit[1] = 3; + state->CH_Ctrl[21].val[1] = 0; + state->CH_Ctrl[21].addr[2] = 106; + state->CH_Ctrl[21].bit[2] = 4; + state->CH_Ctrl[21].val[2] = 0; + state->CH_Ctrl[21].addr[3] = 106; + state->CH_Ctrl[21].bit[3] = 5; + state->CH_Ctrl[21].val[3] = 0; + state->CH_Ctrl[21].addr[4] = 106; + state->CH_Ctrl[21].bit[4] = 6; + state->CH_Ctrl[21].val[4] = 0; + state->CH_Ctrl[21].addr[5] = 106; + state->CH_Ctrl[21].bit[5] = 7; + state->CH_Ctrl[21].val[5] = 1; + + state->CH_Ctrl[22].Ctrl_Num = SEQ_EXTPOWERUP ; + state->CH_Ctrl[22].size = 1 ; + state->CH_Ctrl[22].addr[0] = 138; + state->CH_Ctrl[22].bit[0] = 4; + state->CH_Ctrl[22].val[0] = 1; + + state->CH_Ctrl[23].Ctrl_Num = OVERRIDE_2 ; + state->CH_Ctrl[23].size = 1 ; + state->CH_Ctrl[23].addr[0] = 17; + state->CH_Ctrl[23].bit[0] = 5; + state->CH_Ctrl[23].val[0] = 0; + + state->CH_Ctrl[24].Ctrl_Num = OVERRIDE_3 ; + state->CH_Ctrl[24].size = 1 ; + state->CH_Ctrl[24].addr[0] = 111; + state->CH_Ctrl[24].bit[0] = 3; + state->CH_Ctrl[24].val[0] = 0; + + state->CH_Ctrl[25].Ctrl_Num = OVERRIDE_4 ; + state->CH_Ctrl[25].size = 1 ; + state->CH_Ctrl[25].addr[0] = 112; + state->CH_Ctrl[25].bit[0] = 7; + state->CH_Ctrl[25].val[0] = 0; + + state->CH_Ctrl[26].Ctrl_Num = SEQ_FSM_PULSE ; + state->CH_Ctrl[26].size = 1 ; + state->CH_Ctrl[26].addr[0] = 136; + state->CH_Ctrl[26].bit[0] = 7; + state->CH_Ctrl[26].val[0] = 0; + + state->CH_Ctrl[27].Ctrl_Num = GPIO_4B ; + state->CH_Ctrl[27].size = 1 ; + state->CH_Ctrl[27].addr[0] = 149; + state->CH_Ctrl[27].bit[0] = 7; + state->CH_Ctrl[27].val[0] = 0; + + state->CH_Ctrl[28].Ctrl_Num = GPIO_3B ; + state->CH_Ctrl[28].size = 1 ; + state->CH_Ctrl[28].addr[0] = 149; + state->CH_Ctrl[28].bit[0] = 6; + state->CH_Ctrl[28].val[0] = 0; + + state->CH_Ctrl[29].Ctrl_Num = GPIO_4 ; + state->CH_Ctrl[29].size = 1 ; + state->CH_Ctrl[29].addr[0] = 149; + state->CH_Ctrl[29].bit[0] = 5; + state->CH_Ctrl[29].val[0] = 1; + + state->CH_Ctrl[30].Ctrl_Num = GPIO_3 ; + state->CH_Ctrl[30].size = 1 ; + state->CH_Ctrl[30].addr[0] = 149; + state->CH_Ctrl[30].bit[0] = 4; + state->CH_Ctrl[30].val[0] = 1; + + state->CH_Ctrl[31].Ctrl_Num = GPIO_1B ; + state->CH_Ctrl[31].size = 1 ; + state->CH_Ctrl[31].addr[0] = 149; + state->CH_Ctrl[31].bit[0] = 3; + state->CH_Ctrl[31].val[0] = 0; + + state->CH_Ctrl[32].Ctrl_Num = DAC_A_ENABLE ; + state->CH_Ctrl[32].size = 1 ; + state->CH_Ctrl[32].addr[0] = 93; + state->CH_Ctrl[32].bit[0] = 1; + state->CH_Ctrl[32].val[0] = 0; + + state->CH_Ctrl[33].Ctrl_Num = DAC_B_ENABLE ; + state->CH_Ctrl[33].size = 1 ; + state->CH_Ctrl[33].addr[0] = 93; + state->CH_Ctrl[33].bit[0] = 0; + state->CH_Ctrl[33].val[0] = 0; + + state->CH_Ctrl[34].Ctrl_Num = DAC_DIN_A ; + state->CH_Ctrl[34].size = 6 ; + state->CH_Ctrl[34].addr[0] = 92; + state->CH_Ctrl[34].bit[0] = 2; + state->CH_Ctrl[34].val[0] = 0; + state->CH_Ctrl[34].addr[1] = 92; + state->CH_Ctrl[34].bit[1] = 3; + state->CH_Ctrl[34].val[1] = 0; + state->CH_Ctrl[34].addr[2] = 92; + state->CH_Ctrl[34].bit[2] = 4; + state->CH_Ctrl[34].val[2] = 0; + state->CH_Ctrl[34].addr[3] = 92; + state->CH_Ctrl[34].bit[3] = 5; + state->CH_Ctrl[34].val[3] = 0; + state->CH_Ctrl[34].addr[4] = 92; + state->CH_Ctrl[34].bit[4] = 6; + state->CH_Ctrl[34].val[4] = 0; + state->CH_Ctrl[34].addr[5] = 92; + state->CH_Ctrl[34].bit[5] = 7; + state->CH_Ctrl[34].val[5] = 0; + + state->CH_Ctrl[35].Ctrl_Num = DAC_DIN_B ; + state->CH_Ctrl[35].size = 6 ; + state->CH_Ctrl[35].addr[0] = 93; + state->CH_Ctrl[35].bit[0] = 2; + state->CH_Ctrl[35].val[0] = 0; + state->CH_Ctrl[35].addr[1] = 93; + state->CH_Ctrl[35].bit[1] = 3; + state->CH_Ctrl[35].val[1] = 0; + state->CH_Ctrl[35].addr[2] = 93; + state->CH_Ctrl[35].bit[2] = 4; + state->CH_Ctrl[35].val[2] = 0; + state->CH_Ctrl[35].addr[3] = 93; + state->CH_Ctrl[35].bit[3] = 5; + state->CH_Ctrl[35].val[3] = 0; + state->CH_Ctrl[35].addr[4] = 93; + state->CH_Ctrl[35].bit[4] = 6; + state->CH_Ctrl[35].val[4] = 0; + state->CH_Ctrl[35].addr[5] = 93; + state->CH_Ctrl[35].bit[5] = 7; + state->CH_Ctrl[35].val[5] = 0; + +#ifdef _MXL_PRODUCTION + state->CH_Ctrl[36].Ctrl_Num = RFSYN_EN_DIV ; + state->CH_Ctrl[36].size = 1 ; + state->CH_Ctrl[36].addr[0] = 109; + state->CH_Ctrl[36].bit[0] = 1; + state->CH_Ctrl[36].val[0] = 1; + + state->CH_Ctrl[37].Ctrl_Num = RFSYN_DIVM ; + state->CH_Ctrl[37].size = 2 ; + state->CH_Ctrl[37].addr[0] = 112; + state->CH_Ctrl[37].bit[0] = 5; + state->CH_Ctrl[37].val[0] = 0; + state->CH_Ctrl[37].addr[1] = 112; + state->CH_Ctrl[37].bit[1] = 6; + state->CH_Ctrl[37].val[1] = 0; + + state->CH_Ctrl[38].Ctrl_Num = DN_BYPASS_AGC_I2C ; + state->CH_Ctrl[38].size = 1 ; + state->CH_Ctrl[38].addr[0] = 65; + state->CH_Ctrl[38].bit[0] = 1; + state->CH_Ctrl[38].val[0] = 0; +#endif + + return 0 ; +} + +static void InitTunerControls(struct dvb_frontend *fe) +{ + MXL5005_RegisterInit(fe); + MXL5005_ControlInit(fe); +#ifdef _MXL_INTERNAL + MXL5005_MXLControlInit(fe); +#endif +} + +static u16 MXL5005_TunerConfig(struct dvb_frontend *fe, + u8 Mode, /* 0: Analog Mode ; 1: Digital Mode */ + u8 IF_mode, /* for Analog Mode, 0: zero IF; 1: low IF */ + u32 Bandwidth, /* filter channel bandwidth (6, 7, 8) */ + u32 IF_out, /* Desired IF Out Frequency */ + u32 Fxtal, /* XTAL Frequency */ + u8 AGC_Mode, /* AGC Mode - Dual AGC: 0, Single AGC: 1 */ + u16 TOP, /* 0: Dual AGC; Value: take over point */ + u16 IF_OUT_LOAD, /* IF Out Load Resistor (200 / 300 Ohms) */ + u8 CLOCK_OUT, /* 0: turn off clk out; 1: turn on clock out */ + u8 DIV_OUT, /* 0: Div-1; 1: Div-4 */ + u8 CAPSELECT, /* 0: disable On-Chip pulling cap; 1: enable */ + u8 EN_RSSI, /* 0: disable RSSI; 1: enable RSSI */ + + /* Modulation Type; */ + /* 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable */ + u8 Mod_Type, + + /* Tracking Filter */ + /* 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H */ + u8 TF_Type + ) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u16 status = 0; + + state->Mode = Mode; + state->IF_Mode = IF_mode; + state->Chan_Bandwidth = Bandwidth; + state->IF_OUT = IF_out; + state->Fxtal = Fxtal; + state->AGC_Mode = AGC_Mode; + state->TOP = TOP; + state->IF_OUT_LOAD = IF_OUT_LOAD; + state->CLOCK_OUT = CLOCK_OUT; + state->DIV_OUT = DIV_OUT; + state->CAPSELECT = CAPSELECT; + state->EN_RSSI = EN_RSSI; + state->Mod_Type = Mod_Type; + state->TF_Type = TF_Type; + + /* Initialize all the controls and registers */ + InitTunerControls(fe); + + /* Synthesizer LO frequency calculation */ + MXL_SynthIFLO_Calc(fe); + + return status; +} + +static void MXL_SynthIFLO_Calc(struct dvb_frontend *fe) +{ + struct mxl5005s_state *state = fe->tuner_priv; + if (state->Mode == 1) /* Digital Mode */ + state->IF_LO = state->IF_OUT; + else /* Analog Mode */ { + if (state->IF_Mode == 0) /* Analog Zero IF mode */ + state->IF_LO = state->IF_OUT + 400000; + else /* Analog Low IF mode */ + state->IF_LO = state->IF_OUT + state->Chan_Bandwidth/2; + } +} + +static void MXL_SynthRFTGLO_Calc(struct dvb_frontend *fe) +{ + struct mxl5005s_state *state = fe->tuner_priv; + + if (state->Mode == 1) /* Digital Mode */ { + /* remove 20.48MHz setting for 2.6.10 */ + state->RF_LO = state->RF_IN; + /* change for 2.6.6 */ + state->TG_LO = state->RF_IN - 750000; + } else /* Analog Mode */ { + if (state->IF_Mode == 0) /* Analog Zero IF mode */ { + state->RF_LO = state->RF_IN - 400000; + state->TG_LO = state->RF_IN - 1750000; + } else /* Analog Low IF mode */ { + state->RF_LO = state->RF_IN - state->Chan_Bandwidth/2; + state->TG_LO = state->RF_IN - + state->Chan_Bandwidth + 500000; + } + } +} + +static u16 MXL_OverwriteICDefault(struct dvb_frontend *fe) +{ + u16 status = 0; + + status += MXL_ControlWrite(fe, OVERRIDE_1, 1); + status += MXL_ControlWrite(fe, OVERRIDE_2, 1); + status += MXL_ControlWrite(fe, OVERRIDE_3, 1); + status += MXL_ControlWrite(fe, OVERRIDE_4, 1); + + return status; +} + +static u16 MXL_BlockInit(struct dvb_frontend *fe) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u16 status = 0; + + status += MXL_OverwriteICDefault(fe); + + /* Downconverter Control Dig Ana */ + status += MXL_ControlWrite(fe, DN_IQTN_AMP_CUT, state->Mode ? 1 : 0); + + /* Filter Control Dig Ana */ + status += MXL_ControlWrite(fe, BB_MODE, state->Mode ? 0 : 1); + status += MXL_ControlWrite(fe, BB_BUF, state->Mode ? 3 : 2); + status += MXL_ControlWrite(fe, BB_BUF_OA, state->Mode ? 1 : 0); + status += MXL_ControlWrite(fe, BB_IQSWAP, state->Mode ? 0 : 1); + status += MXL_ControlWrite(fe, BB_INITSTATE_DLPF_TUNE, 0); + + /* Initialize Low-Pass Filter */ + if (state->Mode) { /* Digital Mode */ + switch (state->Chan_Bandwidth) { + case 8000000: + status += MXL_ControlWrite(fe, BB_DLPF_BANDSEL, 0); + break; + case 7000000: + status += MXL_ControlWrite(fe, BB_DLPF_BANDSEL, 2); + break; + case 6000000: + status += MXL_ControlWrite(fe, + BB_DLPF_BANDSEL, 3); + break; + } + } else { /* Analog Mode */ + switch (state->Chan_Bandwidth) { + case 8000000: /* Low Zero */ + status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT, + (state->IF_Mode ? 0 : 3)); + break; + case 7000000: + status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT, + (state->IF_Mode ? 1 : 4)); + break; + case 6000000: + status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT, + (state->IF_Mode ? 2 : 5)); + break; + } + } + + /* Charge Pump Control Dig Ana */ + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, state->Mode ? 5 : 8); + status += MXL_ControlWrite(fe, + RFSYN_EN_CHP_HIGAIN, state->Mode ? 1 : 1); + status += MXL_ControlWrite(fe, EN_CHP_LIN_B, state->Mode ? 0 : 0); + + /* AGC TOP Control */ + if (state->AGC_Mode == 0) /* Dual AGC */ { + status += MXL_ControlWrite(fe, AGC_IF, 15); + status += MXL_ControlWrite(fe, AGC_RF, 15); + } else /* Single AGC Mode Dig Ana */ + status += MXL_ControlWrite(fe, AGC_RF, state->Mode ? 15 : 12); + + if (state->TOP == 55) /* TOP == 5.5 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x0); + + if (state->TOP == 72) /* TOP == 7.2 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x1); + + if (state->TOP == 92) /* TOP == 9.2 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x2); + + if (state->TOP == 110) /* TOP == 11.0 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x3); + + if (state->TOP == 129) /* TOP == 12.9 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x4); + + if (state->TOP == 147) /* TOP == 14.7 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x5); + + if (state->TOP == 168) /* TOP == 16.8 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x6); + + if (state->TOP == 194) /* TOP == 19.4 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x7); + + if (state->TOP == 212) /* TOP == 21.2 */ + status += MXL_ControlWrite(fe, AGC_IF, 0x9); + + if (state->TOP == 232) /* TOP == 23.2 */ + status += MXL_ControlWrite(fe, AGC_IF, 0xA); + + if (state->TOP == 252) /* TOP == 25.2 */ + status += MXL_ControlWrite(fe, AGC_IF, 0xB); + + if (state->TOP == 271) /* TOP == 27.1 */ + status += MXL_ControlWrite(fe, AGC_IF, 0xC); + + if (state->TOP == 292) /* TOP == 29.2 */ + status += MXL_ControlWrite(fe, AGC_IF, 0xD); + + if (state->TOP == 317) /* TOP == 31.7 */ + status += MXL_ControlWrite(fe, AGC_IF, 0xE); + + if (state->TOP == 349) /* TOP == 34.9 */ + status += MXL_ControlWrite(fe, AGC_IF, 0xF); + + /* IF Synthesizer Control */ + status += MXL_IFSynthInit(fe); + + /* IF UpConverter Control */ + if (state->IF_OUT_LOAD == 200) { + status += MXL_ControlWrite(fe, DRV_RES_SEL, 6); + status += MXL_ControlWrite(fe, I_DRIVER, 2); + } + if (state->IF_OUT_LOAD == 300) { + status += MXL_ControlWrite(fe, DRV_RES_SEL, 4); + status += MXL_ControlWrite(fe, I_DRIVER, 1); + } + + /* Anti-Alias Filtering Control + * initialise Anti-Aliasing Filter + */ + if (state->Mode) { /* Digital Mode */ + if (state->IF_OUT >= 4000000UL && state->IF_OUT <= 6280000UL) { + status += MXL_ControlWrite(fe, EN_AAF, 1); + status += MXL_ControlWrite(fe, EN_3P, 1); + status += MXL_ControlWrite(fe, EN_AUX_3P, 1); + status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0); + } + if ((state->IF_OUT == 36125000UL) || + (state->IF_OUT == 36150000UL)) { + status += MXL_ControlWrite(fe, EN_AAF, 1); + status += MXL_ControlWrite(fe, EN_3P, 1); + status += MXL_ControlWrite(fe, EN_AUX_3P, 1); + status += MXL_ControlWrite(fe, SEL_AAF_BAND, 1); + } + if (state->IF_OUT > 36150000UL) { + status += MXL_ControlWrite(fe, EN_AAF, 0); + status += MXL_ControlWrite(fe, EN_3P, 1); + status += MXL_ControlWrite(fe, EN_AUX_3P, 1); + status += MXL_ControlWrite(fe, SEL_AAF_BAND, 1); + } + } else { /* Analog Mode */ + if (state->IF_OUT >= 4000000UL && state->IF_OUT <= 5000000UL) { + status += MXL_ControlWrite(fe, EN_AAF, 1); + status += MXL_ControlWrite(fe, EN_3P, 1); + status += MXL_ControlWrite(fe, EN_AUX_3P, 1); + status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0); + } + if (state->IF_OUT > 5000000UL) { + status += MXL_ControlWrite(fe, EN_AAF, 0); + status += MXL_ControlWrite(fe, EN_3P, 0); + status += MXL_ControlWrite(fe, EN_AUX_3P, 0); + status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0); + } + } + + /* Demod Clock Out */ + if (state->CLOCK_OUT) + status += MXL_ControlWrite(fe, SEQ_ENCLK16_CLK_OUT, 1); + else + status += MXL_ControlWrite(fe, SEQ_ENCLK16_CLK_OUT, 0); + + if (state->DIV_OUT == 1) + status += MXL_ControlWrite(fe, SEQ_SEL4_16B, 1); + if (state->DIV_OUT == 0) + status += MXL_ControlWrite(fe, SEQ_SEL4_16B, 0); + + /* Crystal Control */ + if (state->CAPSELECT) + status += MXL_ControlWrite(fe, XTAL_CAPSELECT, 1); + else + status += MXL_ControlWrite(fe, XTAL_CAPSELECT, 0); + + if (state->Fxtal >= 12000000UL && state->Fxtal <= 16000000UL) + status += MXL_ControlWrite(fe, IF_SEL_DBL, 1); + if (state->Fxtal > 16000000UL && state->Fxtal <= 32000000UL) + status += MXL_ControlWrite(fe, IF_SEL_DBL, 0); + + if (state->Fxtal >= 12000000UL && state->Fxtal <= 22000000UL) + status += MXL_ControlWrite(fe, RFSYN_R_DIV, 3); + if (state->Fxtal > 22000000UL && state->Fxtal <= 32000000UL) + status += MXL_ControlWrite(fe, RFSYN_R_DIV, 0); + + /* Misc Controls */ + if (state->Mode == 0 && state->IF_Mode == 1) /* Analog LowIF mode */ + status += MXL_ControlWrite(fe, SEQ_EXTIQFSMPULSE, 0); + else + status += MXL_ControlWrite(fe, SEQ_EXTIQFSMPULSE, 1); + + /* status += MXL_ControlRead(fe, IF_DIVVAL, &IF_DIVVAL_Val); */ + + /* Set TG_R_DIV */ + status += MXL_ControlWrite(fe, TG_R_DIV, + MXL_Ceiling(state->Fxtal, 1000000)); + + /* Apply Default value to BB_INITSTATE_DLPF_TUNE */ + + /* RSSI Control */ + if (state->EN_RSSI) { + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + + /* RSSI reference point */ + status += MXL_ControlWrite(fe, RFA_RSSI_REF, 2); + status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 3); + status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1); + + /* TOP point */ + status += MXL_ControlWrite(fe, RFA_FLR, 0); + status += MXL_ControlWrite(fe, RFA_CEIL, 12); + } + + /* Modulation type bit settings + * Override the control values preset + */ + if (state->Mod_Type == MXL_DVBT) /* DVB-T Mode */ { + state->AGC_Mode = 1; /* Single AGC Mode */ + + /* Enable RSSI */ + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + + /* RSSI reference point */ + status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3); + status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5); + status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1); + + /* TOP point */ + status += MXL_ControlWrite(fe, RFA_FLR, 2); + status += MXL_ControlWrite(fe, RFA_CEIL, 13); + if (state->IF_OUT <= 6280000UL) /* Low IF */ + status += MXL_ControlWrite(fe, BB_IQSWAP, 0); + else /* High IF */ + status += MXL_ControlWrite(fe, BB_IQSWAP, 1); + + } + if (state->Mod_Type == MXL_ATSC) /* ATSC Mode */ { + state->AGC_Mode = 1; /* Single AGC Mode */ + + /* Enable RSSI */ + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + + /* RSSI reference point */ + status += MXL_ControlWrite(fe, RFA_RSSI_REF, 2); + status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 4); + status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1); + + /* TOP point */ + status += MXL_ControlWrite(fe, RFA_FLR, 2); + status += MXL_ControlWrite(fe, RFA_CEIL, 13); + status += MXL_ControlWrite(fe, BB_INITSTATE_DLPF_TUNE, 1); + /* Low Zero */ + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 5); + + if (state->IF_OUT <= 6280000UL) /* Low IF */ + status += MXL_ControlWrite(fe, BB_IQSWAP, 0); + else /* High IF */ + status += MXL_ControlWrite(fe, BB_IQSWAP, 1); + } + if (state->Mod_Type == MXL_QAM) /* QAM Mode */ { + state->Mode = MXL_DIGITAL_MODE; + + /* state->AGC_Mode = 1; */ /* Single AGC Mode */ + + /* Disable RSSI */ /* change here for v2.6.5 */ + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + + /* RSSI reference point */ + status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5); + status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3); + status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2); + /* change here for v2.6.5 */ + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3); + + if (state->IF_OUT <= 6280000UL) /* Low IF */ + status += MXL_ControlWrite(fe, BB_IQSWAP, 0); + else /* High IF */ + status += MXL_ControlWrite(fe, BB_IQSWAP, 1); + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 2); + + } + if (state->Mod_Type == MXL_ANALOG_CABLE) { + /* Analog Cable Mode */ + /* state->Mode = MXL_DIGITAL_MODE; */ + + state->AGC_Mode = 1; /* Single AGC Mode */ + + /* Disable RSSI */ + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + /* change for 2.6.3 */ + status += MXL_ControlWrite(fe, AGC_IF, 1); + status += MXL_ControlWrite(fe, AGC_RF, 15); + status += MXL_ControlWrite(fe, BB_IQSWAP, 1); + } + + if (state->Mod_Type == MXL_ANALOG_OTA) { + /* Analog OTA Terrestrial mode add for 2.6.7 */ + /* state->Mode = MXL_ANALOG_MODE; */ + + /* Enable RSSI */ + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + + /* RSSI reference point */ + status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5); + status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3); + status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2); + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3); + status += MXL_ControlWrite(fe, BB_IQSWAP, 1); + } + + /* RSSI disable */ + if (state->EN_RSSI == 0) { + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + } + + return status; +} + +static u16 MXL_IFSynthInit(struct dvb_frontend *fe) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u16 status = 0 ; + u32 Fref = 0 ; + u32 Kdbl, intModVal ; + u32 fracModVal ; + Kdbl = 2 ; + + if (state->Fxtal >= 12000000UL && state->Fxtal <= 16000000UL) + Kdbl = 2 ; + if (state->Fxtal > 16000000UL && state->Fxtal <= 32000000UL) + Kdbl = 1 ; + + /* IF Synthesizer Control */ + if (state->Mode == 0 && state->IF_Mode == 1) /* Analog Low IF mode */ { + if (state->IF_LO == 41000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 328000000UL ; + } + if (state->IF_LO == 47000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 376000000UL ; + } + if (state->IF_LO == 54000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 324000000UL ; + } + if (state->IF_LO == 60000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 360000000UL ; + } + if (state->IF_LO == 39250000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 314000000UL ; + } + if (state->IF_LO == 39650000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 317200000UL ; + } + if (state->IF_LO == 40150000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 321200000UL ; + } + if (state->IF_LO == 40650000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 325200000UL ; + } + } + + if (state->Mode || (state->Mode == 0 && state->IF_Mode == 0)) { + if (state->IF_LO == 57000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 342000000UL ; + } + if (state->IF_LO == 44000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 352000000UL ; + } + if (state->IF_LO == 43750000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 350000000UL ; + } + if (state->IF_LO == 36650000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 366500000UL ; + } + if (state->IF_LO == 36150000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 361500000UL ; + } + if (state->IF_LO == 36000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 360000000UL ; + } + if (state->IF_LO == 35250000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 352500000UL ; + } + if (state->IF_LO == 34750000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 347500000UL ; + } + if (state->IF_LO == 6280000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 376800000UL ; + } + if (state->IF_LO == 5000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 360000000UL ; + } + if (state->IF_LO == 4500000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 360000000UL ; + } + if (state->IF_LO == 4570000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 365600000UL ; + } + if (state->IF_LO == 4000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x05); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 360000000UL ; + } + if (state->IF_LO == 57400000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 344400000UL ; + } + if (state->IF_LO == 44400000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 355200000UL ; + } + if (state->IF_LO == 44150000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 353200000UL ; + } + if (state->IF_LO == 37050000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 370500000UL ; + } + if (state->IF_LO == 36550000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 365500000UL ; + } + if (state->IF_LO == 36125000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 361250000UL ; + } + if (state->IF_LO == 6000000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 360000000UL ; + } + if (state->IF_LO == 5400000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 324000000UL ; + } + if (state->IF_LO == 5380000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C); + Fref = 322800000UL ; + } + if (state->IF_LO == 5200000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 374400000UL ; + } + if (state->IF_LO == 4900000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 352800000UL ; + } + if (state->IF_LO == 4400000UL) { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 352000000UL ; + } + if (state->IF_LO == 4063000UL) /* add for 2.6.8 */ { + status += MXL_ControlWrite(fe, IF_DIVVAL, 0x05); + status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08); + Fref = 365670000UL ; + } + } + /* CHCAL_INT_MOD_IF */ + /* CHCAL_FRAC_MOD_IF */ + intModVal = Fref / (state->Fxtal * Kdbl/2); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_IF, intModVal); + + fracModVal = (2<<15)*(Fref/1000 - (state->Fxtal/1000 * Kdbl/2) * + intModVal); + + fracModVal = fracModVal / ((state->Fxtal * Kdbl/2)/1000); + status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_IF, fracModVal); + + return status ; +} + +static u32 MXL_GetXtalInt(u32 Xtal_Freq) +{ + if ((Xtal_Freq % 1000000) == 0) + return (Xtal_Freq / 10000); + else + return (((Xtal_Freq / 1000000) + 1)*100); +} + +static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u16 status = 0; + u32 divider_val, E3, E4, E5, E5A; + u32 Fmax, Fmin, FmaxBin, FminBin; + u32 Kdbl_RF = 2; + u32 tg_divval; + u32 tg_lo; + u32 Xtal_Int; + + u32 Fref_TG; + u32 Fvco; + + Xtal_Int = MXL_GetXtalInt(state->Fxtal); + + state->RF_IN = RF_Freq; + + MXL_SynthRFTGLO_Calc(fe); + + if (state->Fxtal >= 12000000UL && state->Fxtal <= 22000000UL) + Kdbl_RF = 2; + if (state->Fxtal > 22000000 && state->Fxtal <= 32000000) + Kdbl_RF = 1; + + /* Downconverter Controls + * Look-Up Table Implementation for: + * DN_POLY + * DN_RFGAIN + * DN_CAP_RFLPF + * DN_EN_VHFUHFBAR + * DN_GAIN_ADJUST + * Change the boundary reference from RF_IN to RF_LO + */ + if (state->RF_LO < 40000000UL) + return -1; + + if (state->RF_LO >= 40000000UL && state->RF_LO <= 75000000UL) { + status += MXL_ControlWrite(fe, DN_POLY, 2); + status += MXL_ControlWrite(fe, DN_RFGAIN, 3); + status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 423); + status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1); + status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 1); + } + if (state->RF_LO > 75000000UL && state->RF_LO <= 100000000UL) { + status += MXL_ControlWrite(fe, DN_POLY, 3); + status += MXL_ControlWrite(fe, DN_RFGAIN, 3); + status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 222); + status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1); + status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 1); + } + if (state->RF_LO > 100000000UL && state->RF_LO <= 150000000UL) { + status += MXL_ControlWrite(fe, DN_POLY, 3); + status += MXL_ControlWrite(fe, DN_RFGAIN, 3); + status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 147); + status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1); + status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 2); + } + if (state->RF_LO > 150000000UL && state->RF_LO <= 200000000UL) { + status += MXL_ControlWrite(fe, DN_POLY, 3); + status += MXL_ControlWrite(fe, DN_RFGAIN, 3); + status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 9); + status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1); + status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 2); + } + if (state->RF_LO > 200000000UL && state->RF_LO <= 300000000UL) { + status += MXL_ControlWrite(fe, DN_POLY, 3); + status += MXL_ControlWrite(fe, DN_RFGAIN, 3); + status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0); + status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1); + status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3); + } + if (state->RF_LO > 300000000UL && state->RF_LO <= 650000000UL) { + status += MXL_ControlWrite(fe, DN_POLY, 3); + status += MXL_ControlWrite(fe, DN_RFGAIN, 1); + status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0); + status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 0); + status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3); + } + if (state->RF_LO > 650000000UL && state->RF_LO <= 900000000UL) { + status += MXL_ControlWrite(fe, DN_POLY, 3); + status += MXL_ControlWrite(fe, DN_RFGAIN, 2); + status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0); + status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 0); + status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3); + } + if (state->RF_LO > 900000000UL) + return -1; + + /* DN_IQTNBUF_AMP */ + /* DN_IQTNGNBFBIAS_BST */ + if (state->RF_LO >= 40000000UL && state->RF_LO <= 75000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 75000000UL && state->RF_LO <= 100000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 100000000UL && state->RF_LO <= 150000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 150000000UL && state->RF_LO <= 200000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 200000000UL && state->RF_LO <= 300000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 300000000UL && state->RF_LO <= 400000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 400000000UL && state->RF_LO <= 450000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 450000000UL && state->RF_LO <= 500000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 500000000UL && state->RF_LO <= 550000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 550000000UL && state->RF_LO <= 600000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 600000000UL && state->RF_LO <= 650000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 650000000UL && state->RF_LO <= 700000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 700000000UL && state->RF_LO <= 750000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 750000000UL && state->RF_LO <= 800000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0); + } + if (state->RF_LO > 800000000UL && state->RF_LO <= 850000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 10); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 1); + } + if (state->RF_LO > 850000000UL && state->RF_LO <= 900000000UL) { + status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 10); + status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 1); + } + + /* + * Set RF Synth and LO Path Control + * + * Look-Up table implementation for: + * RFSYN_EN_OUTMUX + * RFSYN_SEL_VCO_OUT + * RFSYN_SEL_VCO_HI + * RFSYN_SEL_DIVM + * RFSYN_RF_DIV_BIAS + * DN_SEL_FREQ + * + * Set divider_val, Fmax, Fmix to use in Equations + */ + FminBin = 28000000UL ; + FmaxBin = 42500000UL ; + if (state->RF_LO >= 40000000UL && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1); + divider_val = 64 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 42500000UL ; + FmaxBin = 56000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1); + divider_val = 64 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 56000000UL ; + FmaxBin = 85000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1); + divider_val = 32 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 85000000UL ; + FmaxBin = 112000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1); + divider_val = 32 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 112000000UL ; + FmaxBin = 170000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 2); + divider_val = 16 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 170000000UL ; + FmaxBin = 225000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 2); + divider_val = 16 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 225000000UL ; + FmaxBin = 300000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 4); + divider_val = 8 ; + Fmax = 340000000UL ; + Fmin = FminBin ; + } + FminBin = 300000000UL ; + FmaxBin = 340000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + divider_val = 8 ; + Fmax = FmaxBin ; + Fmin = 225000000UL ; + } + FminBin = 340000000UL ; + FmaxBin = 450000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 2); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + divider_val = 8 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 450000000UL ; + FmaxBin = 680000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 1); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + divider_val = 4 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 680000000UL ; + FmaxBin = 900000000UL ; + if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 1); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + divider_val = 4 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + + /* CHCAL_INT_MOD_RF + * CHCAL_FRAC_MOD_RF + * RFSYN_LPF_R + * CHCAL_EN_INT_RF + */ + /* Equation E3 RFSYN_VCO_BIAS */ + E3 = (((Fmax-state->RF_LO)/1000)*32)/((Fmax-Fmin)/1000) + 8 ; + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, E3); + + /* Equation E4 CHCAL_INT_MOD_RF */ + E4 = (state->RF_LO*divider_val/1000)/(2*state->Fxtal*Kdbl_RF/1000); + MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, E4); + + /* Equation E5 CHCAL_FRAC_MOD_RF CHCAL_EN_INT_RF */ + E5 = ((2<<17)*(state->RF_LO/10000*divider_val - + (E4*(2*state->Fxtal*Kdbl_RF)/10000))) / + (2*state->Fxtal*Kdbl_RF/10000); + + status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_RF, E5); + + /* Equation E5A RFSYN_LPF_R */ + E5A = (((Fmax - state->RF_LO)/1000)*4/((Fmax-Fmin)/1000)) + 1 ; + status += MXL_ControlWrite(fe, RFSYN_LPF_R, E5A); + + /* Euqation E5B CHCAL_EN_INIT_RF */ + status += MXL_ControlWrite(fe, CHCAL_EN_INT_RF, ((E5 == 0) ? 1 : 0)); + /*if (E5 == 0) + * status += MXL_ControlWrite(fe, CHCAL_EN_INT_RF, 1); + *else + * status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_RF, E5); + */ + + /* + * Set TG Synth + * + * Look-Up table implementation for: + * TG_LO_DIVVAL + * TG_LO_SELVAL + * + * Set divider_val, Fmax, Fmix to use in Equations + */ + if (state->TG_LO < 33000000UL) + return -1; + + FminBin = 33000000UL ; + FmaxBin = 50000000UL ; + if (state->TG_LO >= FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x6); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x0); + divider_val = 36 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 50000000UL ; + FmaxBin = 67000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x1); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x0); + divider_val = 24 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 67000000UL ; + FmaxBin = 100000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0xC); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2); + divider_val = 18 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 100000000UL ; + FmaxBin = 150000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2); + divider_val = 12 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 150000000UL ; + FmaxBin = 200000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2); + divider_val = 8 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 200000000UL ; + FmaxBin = 300000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x3); + divider_val = 6 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 300000000UL ; + FmaxBin = 400000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x3); + divider_val = 4 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 400000000UL ; + FmaxBin = 600000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x7); + divider_val = 3 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + FminBin = 600000000UL ; + FmaxBin = 900000000UL ; + if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) { + status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0); + status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x7); + divider_val = 2 ; + Fmax = FmaxBin ; + Fmin = FminBin ; + } + + /* TG_DIV_VAL */ + tg_divval = (state->TG_LO*divider_val/100000) * + (MXL_Ceiling(state->Fxtal, 1000000) * 100) / + (state->Fxtal/1000); + + status += MXL_ControlWrite(fe, TG_DIV_VAL, tg_divval); + + if (state->TG_LO > 600000000UL) + status += MXL_ControlWrite(fe, TG_DIV_VAL, tg_divval + 1); + + Fmax = 1800000000UL ; + Fmin = 1200000000UL ; + + /* prevent overflow of 32 bit unsigned integer, use + * following equation. Edit for v2.6.4 + */ + /* Fref_TF = Fref_TG * 1000 */ + Fref_TG = (state->Fxtal/1000) / MXL_Ceiling(state->Fxtal, 1000000); + + /* Fvco = Fvco/10 */ + Fvco = (state->TG_LO/10000) * divider_val * Fref_TG; + + tg_lo = (((Fmax/10 - Fvco)/100)*32) / ((Fmax-Fmin)/1000)+8; + + /* below equation is same as above but much harder to debug. + * tg_lo = ( ((Fmax/10000 * Xtal_Int)/100) - + * ((state->TG_LO/10000)*divider_val * + * (state->Fxtal/10000)/100) )*32/((Fmax-Fmin)/10000 * + * Xtal_Int/100) + 8; + */ + + status += MXL_ControlWrite(fe, TG_VCO_BIAS , tg_lo); + + /* add for 2.6.5 Special setting for QAM */ + if (state->Mod_Type == MXL_QAM) { + if (state->RF_IN < 680000000) + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3); + else + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 2); + } + + /* Off Chip Tracking Filter Control */ + if (state->TF_Type == MXL_TF_OFF) { + /* Tracking Filter Off State; turn off all the banks */ + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 3, 1); /* Bank1 Off */ + status += MXL_SetGPIO(fe, 1, 1); /* Bank2 Off */ + status += MXL_SetGPIO(fe, 4, 1); /* Bank3 Off */ + } + + if (state->TF_Type == MXL_TF_C) /* Tracking Filter type C */ { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_ControlWrite(fe, DAC_DIN_A, 0); + + if (state->RF_IN >= 43000000 && state->RF_IN < 150000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + status += MXL_SetGPIO(fe, 3, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 1); + } + if (state->RF_IN >= 150000000 && state->RF_IN < 280000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 4, 1); + } + if (state->RF_IN >= 280000000 && state->RF_IN < 360000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 4, 0); + } + if (state->RF_IN >= 360000000 && state->RF_IN < 560000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 0); + } + if (state->RF_IN >= 560000000 && state->RF_IN < 580000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_ControlWrite(fe, DAC_DIN_B, 29); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 0); + } + if (state->RF_IN >= 580000000 && state->RF_IN < 630000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 0); + } + if (state->RF_IN >= 630000000 && state->RF_IN < 700000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_ControlWrite(fe, DAC_DIN_B, 16); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 1); + } + if (state->RF_IN >= 700000000 && state->RF_IN < 760000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_ControlWrite(fe, DAC_DIN_B, 7); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 1); + } + if (state->RF_IN >= 760000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 1); + } + } + + if (state->TF_Type == MXL_TF_C_H) { + + /* Tracking Filter type C-H for Hauppauge only */ + status += MXL_ControlWrite(fe, DAC_DIN_A, 0); + + if (state->RF_IN >= 43000000 && state->RF_IN < 150000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + } + if (state->RF_IN >= 150000000 && state->RF_IN < 280000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 0); + status += MXL_SetGPIO(fe, 1, 1); + } + if (state->RF_IN >= 280000000 && state->RF_IN < 360000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 0); + status += MXL_SetGPIO(fe, 1, 0); + } + if (state->RF_IN >= 360000000 && state->RF_IN < 560000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 0); + } + if (state->RF_IN >= 560000000 && state->RF_IN < 580000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 0); + } + if (state->RF_IN >= 580000000 && state->RF_IN < 630000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 0); + } + if (state->RF_IN >= 630000000 && state->RF_IN < 700000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + } + if (state->RF_IN >= 700000000 && state->RF_IN < 760000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + } + if (state->RF_IN >= 760000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + } + } + + if (state->TF_Type == MXL_TF_D) { /* Tracking Filter type D */ + + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + + if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 250000000 && state->RF_IN < 310000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 310000000 && state->RF_IN < 360000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 360000000 && state->RF_IN < 470000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 640000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + } + + if (state->TF_Type == MXL_TF_D_L) { + + /* Tracking Filter type D-L for Lumanate ONLY change 2.6.3 */ + status += MXL_ControlWrite(fe, DAC_DIN_A, 0); + + /* if UHF and terrestrial => Turn off Tracking Filter */ + if (state->RF_IN >= 471000000 && + (state->RF_IN - 471000000)%6000000 != 0) { + /* Turn off all the banks */ + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_ControlWrite(fe, AGC_IF, 10); + } else { + /* if VHF or cable => Turn on Tracking Filter */ + if (state->RF_IN >= 43000000 && + state->RF_IN < 140000000) { + + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 140000000 && + state->RF_IN < 240000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 240000000 && + state->RF_IN < 340000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 340000000 && + state->RF_IN < 430000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 430000000 && + state->RF_IN < 470000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 470000000 && + state->RF_IN < 570000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 570000000 && + state->RF_IN < 620000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 620000000 && + state->RF_IN < 760000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 760000000 && + state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + } + } + + if (state->TF_Type == MXL_TF_E) /* Tracking Filter type E */ { + + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + + if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 250000000 && state->RF_IN < 310000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 310000000 && state->RF_IN < 360000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 360000000 && state->RF_IN < 470000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 640000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + } + + if (state->TF_Type == MXL_TF_F) { + + /* Tracking Filter type F */ + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + + if (state->RF_IN >= 43000000 && state->RF_IN < 160000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 160000000 && state->RF_IN < 210000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 210000000 && state->RF_IN < 300000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 300000000 && state->RF_IN < 390000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 390000000 && state->RF_IN < 515000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 515000000 && state->RF_IN < 650000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 650000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + } + + if (state->TF_Type == MXL_TF_E_2) { + + /* Tracking Filter type E_2 */ + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + + if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 250000000 && state->RF_IN < 350000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 400000000 && state->RF_IN < 570000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 570000000 && state->RF_IN < 770000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 770000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + } + + if (state->TF_Type == MXL_TF_G) { + + /* Tracking Filter type G add for v2.6.8 */ + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + + if (state->RF_IN >= 50000000 && state->RF_IN < 190000000) { + + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 190000000 && state->RF_IN < 280000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 280000000 && state->RF_IN < 350000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 400000000 && state->RF_IN < 470000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 640000000 && state->RF_IN < 820000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 820000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + } + + if (state->TF_Type == MXL_TF_E_NA) { + + /* Tracking Filter type E-NA for Empia ONLY change for 2.6.8 */ + status += MXL_ControlWrite(fe, DAC_DIN_B, 0); + + /* if UHF and terrestrial=> Turn off Tracking Filter */ + if (state->RF_IN >= 471000000 && + (state->RF_IN - 471000000)%6000000 != 0) { + + /* Turn off all the banks */ + status += MXL_SetGPIO(fe, 3, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + + /* 2.6.12 Turn on RSSI */ + status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1); + status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1); + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1); + status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1); + + /* RSSI reference point */ + status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5); + status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3); + status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2); + + /* following parameter is from analog OTA mode, + * can be change to seek better performance */ + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3); + } else { + /* if VHF or Cable => Turn on Tracking Filter */ + + /* 2.6.12 Turn off RSSI */ + status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0); + + /* change back from above condition */ + status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 5); + + + if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) { + + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 0); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 250000000 && state->RF_IN < 350000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 1); + } + if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 0); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 400000000 && state->RF_IN < 570000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 570000000 && state->RF_IN < 770000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 0); + } + if (state->RF_IN >= 770000000 && state->RF_IN <= 900000000) { + status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1); + status += MXL_SetGPIO(fe, 4, 1); + status += MXL_SetGPIO(fe, 1, 1); + status += MXL_SetGPIO(fe, 3, 1); + } + } + } + return status ; +} + +static u16 MXL_SetGPIO(struct dvb_frontend *fe, u8 GPIO_Num, u8 GPIO_Val) +{ + u16 status = 0; + + if (GPIO_Num == 1) + status += MXL_ControlWrite(fe, GPIO_1B, GPIO_Val ? 0 : 1); + + /* GPIO2 is not available */ + + if (GPIO_Num == 3) { + if (GPIO_Val == 1) { + status += MXL_ControlWrite(fe, GPIO_3, 0); + status += MXL_ControlWrite(fe, GPIO_3B, 0); + } + if (GPIO_Val == 0) { + status += MXL_ControlWrite(fe, GPIO_3, 1); + status += MXL_ControlWrite(fe, GPIO_3B, 1); + } + if (GPIO_Val == 3) { /* tri-state */ + status += MXL_ControlWrite(fe, GPIO_3, 0); + status += MXL_ControlWrite(fe, GPIO_3B, 1); + } + } + if (GPIO_Num == 4) { + if (GPIO_Val == 1) { + status += MXL_ControlWrite(fe, GPIO_4, 0); + status += MXL_ControlWrite(fe, GPIO_4B, 0); + } + if (GPIO_Val == 0) { + status += MXL_ControlWrite(fe, GPIO_4, 1); + status += MXL_ControlWrite(fe, GPIO_4B, 1); + } + if (GPIO_Val == 3) { /* tri-state */ + status += MXL_ControlWrite(fe, GPIO_4, 0); + status += MXL_ControlWrite(fe, GPIO_4B, 1); + } + } + + return status; +} + +static u16 MXL_ControlWrite(struct dvb_frontend *fe, u16 ControlNum, u32 value) +{ + u16 status = 0; + + /* Will write ALL Matching Control Name */ + /* Write Matching INIT Control */ + status += MXL_ControlWrite_Group(fe, ControlNum, value, 1); + /* Write Matching CH Control */ + status += MXL_ControlWrite_Group(fe, ControlNum, value, 2); +#ifdef _MXL_INTERNAL + /* Write Matching MXL Control */ + status += MXL_ControlWrite_Group(fe, ControlNum, value, 3); +#endif + return status; +} + +static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum, + u32 value, u16 controlGroup) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u16 i, j, k; + u32 highLimit; + u32 ctrlVal; + + if (controlGroup == 1) /* Initial Control */ { + + for (i = 0; i < state->Init_Ctrl_Num; i++) { + + if (controlNum == state->Init_Ctrl[i].Ctrl_Num) { + + highLimit = 1 << state->Init_Ctrl[i].size; + if (value < highLimit) { + for (j = 0; j < state->Init_Ctrl[i].size; j++) { + state->Init_Ctrl[i].val[j] = (u8)((value >> j) & 0x01); + MXL_RegWriteBit(fe, (u8)(state->Init_Ctrl[i].addr[j]), + (u8)(state->Init_Ctrl[i].bit[j]), + (u8)((value>>j) & 0x01)); + } + ctrlVal = 0; + for (k = 0; k < state->Init_Ctrl[i].size; k++) + ctrlVal += state->Init_Ctrl[i].val[k] * (1 << k); + } else + return -1; + } + } + } + if (controlGroup == 2) /* Chan change Control */ { + + for (i = 0; i < state->CH_Ctrl_Num; i++) { + + if (controlNum == state->CH_Ctrl[i].Ctrl_Num) { + + highLimit = 1 << state->CH_Ctrl[i].size; + if (value < highLimit) { + for (j = 0; j < state->CH_Ctrl[i].size; j++) { + state->CH_Ctrl[i].val[j] = (u8)((value >> j) & 0x01); + MXL_RegWriteBit(fe, (u8)(state->CH_Ctrl[i].addr[j]), + (u8)(state->CH_Ctrl[i].bit[j]), + (u8)((value>>j) & 0x01)); + } + ctrlVal = 0; + for (k = 0; k < state->CH_Ctrl[i].size; k++) + ctrlVal += state->CH_Ctrl[i].val[k] * (1 << k); + } else + return -1; + } + } + } +#ifdef _MXL_INTERNAL + if (controlGroup == 3) /* Maxlinear Control */ { + + for (i = 0; i < state->MXL_Ctrl_Num; i++) { + + if (controlNum == state->MXL_Ctrl[i].Ctrl_Num) { + + highLimit = (1 << state->MXL_Ctrl[i].size); + if (value < highLimit) { + for (j = 0; j < state->MXL_Ctrl[i].size; j++) { + state->MXL_Ctrl[i].val[j] = (u8)((value >> j) & 0x01); + MXL_RegWriteBit(fe, (u8)(state->MXL_Ctrl[i].addr[j]), + (u8)(state->MXL_Ctrl[i].bit[j]), + (u8)((value>>j) & 0x01)); + } + ctrlVal = 0; + for (k = 0; k < state->MXL_Ctrl[i].size; k++) + ctrlVal += state->MXL_Ctrl[i].val[k] * (1 << k); + } else + return -1; + } + } + } +#endif + return 0 ; /* successful return */ +} + +static u16 MXL_RegRead(struct dvb_frontend *fe, u8 RegNum, u8 *RegVal) +{ + struct mxl5005s_state *state = fe->tuner_priv; + int i ; + + for (i = 0; i < 104; i++) { + if (RegNum == state->TunerRegs[i].Reg_Num) { + *RegVal = (u8)(state->TunerRegs[i].Reg_Val); + return 0; + } + } + + return 1; +} + +static u16 MXL_ControlRead(struct dvb_frontend *fe, u16 controlNum, u32 *value) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u32 ctrlVal ; + u16 i, k ; + + for (i = 0; i < state->Init_Ctrl_Num ; i++) { + + if (controlNum == state->Init_Ctrl[i].Ctrl_Num) { + + ctrlVal = 0; + for (k = 0; k < state->Init_Ctrl[i].size; k++) + ctrlVal += state->Init_Ctrl[i].val[k] * (1<<k); + *value = ctrlVal; + return 0; + } + } + + for (i = 0; i < state->CH_Ctrl_Num ; i++) { + + if (controlNum == state->CH_Ctrl[i].Ctrl_Num) { + + ctrlVal = 0; + for (k = 0; k < state->CH_Ctrl[i].size; k++) + ctrlVal += state->CH_Ctrl[i].val[k] * (1 << k); + *value = ctrlVal; + return 0; + + } + } + +#ifdef _MXL_INTERNAL + for (i = 0; i < state->MXL_Ctrl_Num ; i++) { + + if (controlNum == state->MXL_Ctrl[i].Ctrl_Num) { + + ctrlVal = 0; + for (k = 0; k < state->MXL_Ctrl[i].size; k++) + ctrlVal += state->MXL_Ctrl[i].val[k] * (1<<k); + *value = ctrlVal; + return 0; + + } + } +#endif + return 1; +} + +static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit, + u8 bitVal) +{ + struct mxl5005s_state *state = fe->tuner_priv; + int i ; + + const u8 AND_MAP[8] = { + 0xFE, 0xFD, 0xFB, 0xF7, + 0xEF, 0xDF, 0xBF, 0x7F } ; + + const u8 OR_MAP[8] = { + 0x01, 0x02, 0x04, 0x08, + 0x10, 0x20, 0x40, 0x80 } ; + + for (i = 0; i < state->TunerRegs_Num; i++) { + if (state->TunerRegs[i].Reg_Num == address) { + if (bitVal) + state->TunerRegs[i].Reg_Val |= OR_MAP[bit]; + else + state->TunerRegs[i].Reg_Val &= AND_MAP[bit]; + break ; + } + } +} + +static u32 MXL_Ceiling(u32 value, u32 resolution) +{ + return (value/resolution + (value % resolution > 0 ? 1 : 0)); +} + +/* Retrieve the Initialzation Registers */ +static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum, + u8 *RegVal, int *count) +{ + u16 status = 0; + int i ; + + u8 RegAddr[] = { + 11, 12, 13, 22, 32, 43, 44, 53, 56, 59, 73, + 76, 77, 91, 134, 135, 137, 147, + 156, 166, 167, 168, 25 }; + + *count = sizeof(RegAddr) / sizeof(u8); + + status += MXL_BlockInit(fe); + + for (i = 0 ; i < *count; i++) { + RegNum[i] = RegAddr[i]; + status += MXL_RegRead(fe, RegNum[i], &RegVal[i]); + } + + return status; +} + +static u16 MXL_GetCHRegister(struct dvb_frontend *fe, u8 *RegNum, u8 *RegVal, + int *count) +{ + u16 status = 0; + int i ; + +/* add 77, 166, 167, 168 register for 2.6.12 */ +#ifdef _MXL_PRODUCTION + u8 RegAddr[] = {14, 15, 16, 17, 22, 43, 65, 68, 69, 70, 73, 92, 93, 106, + 107, 108, 109, 110, 111, 112, 136, 138, 149, 77, 166, 167, 168 } ; +#else + u8 RegAddr[] = {14, 15, 16, 17, 22, 43, 68, 69, 70, 73, 92, 93, 106, + 107, 108, 109, 110, 111, 112, 136, 138, 149, 77, 166, 167, 168 } ; + /* + u8 RegAddr[171]; + for (i = 0; i <= 170; i++) + RegAddr[i] = i; + */ +#endif + + *count = sizeof(RegAddr) / sizeof(u8); + + for (i = 0 ; i < *count; i++) { + RegNum[i] = RegAddr[i]; + status += MXL_RegRead(fe, RegNum[i], &RegVal[i]); + } + + return status; +} + +static u16 MXL_GetCHRegister_ZeroIF(struct dvb_frontend *fe, u8 *RegNum, + u8 *RegVal, int *count) +{ + u16 status = 0; + int i; + + u8 RegAddr[] = {43, 136}; + + *count = sizeof(RegAddr) / sizeof(u8); + + for (i = 0; i < *count; i++) { + RegNum[i] = RegAddr[i]; + status += MXL_RegRead(fe, RegNum[i], &RegVal[i]); + } + + return status; +} + +static u16 MXL_GetMasterControl(u8 *MasterReg, int state) +{ + if (state == 1) /* Load_Start */ + *MasterReg = 0xF3; + if (state == 2) /* Power_Down */ + *MasterReg = 0x41; + if (state == 3) /* Synth_Reset */ + *MasterReg = 0xB1; + if (state == 4) /* Seq_Off */ + *MasterReg = 0xF1; + + return 0; +} + +#ifdef _MXL_PRODUCTION +static u16 MXL_VCORange_Test(struct dvb_frontend *fe, int VCO_Range) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u16 status = 0 ; + + if (VCO_Range == 1) { + status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1); + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_DIVM, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + if (state->Mode == 0 && state->IF_Mode == 1) { + /* Analog Low IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 180224); + } + if (state->Mode == 0 && state->IF_Mode == 0) { + /* Analog Zero IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 222822); + } + if (state->Mode == 1) /* Digital Mode */ { + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 229376); + } + } + + if (VCO_Range == 2) { + status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1); + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_DIVM, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 41); + if (state->Mode == 0 && state->IF_Mode == 1) { + /* Analog Low IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 206438); + } + if (state->Mode == 0 && state->IF_Mode == 0) { + /* Analog Zero IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 206438); + } + if (state->Mode == 1) /* Digital Mode */ { + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 41); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 16384); + } + } + + if (VCO_Range == 3) { + status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1); + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_DIVM, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42); + if (state->Mode == 0 && state->IF_Mode == 1) { + /* Analog Low IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 44); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 173670); + } + if (state->Mode == 0 && state->IF_Mode == 0) { + /* Analog Zero IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 44); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 173670); + } + if (state->Mode == 1) /* Digital Mode */ { + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 245760); + } + } + + if (VCO_Range == 4) { + status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1); + status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0); + status += MXL_ControlWrite(fe, RFSYN_DIVM, 1); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1); + status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1); + status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0); + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27); + if (state->Mode == 0 && state->IF_Mode == 1) { + /* Analog Low IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 206438); + } + if (state->Mode == 0 && state->IF_Mode == 0) { + /* Analog Zero IF Mode */ + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 206438); + } + if (state->Mode == 1) /* Digital Mode */ { + status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0); + status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40); + status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27); + status += MXL_ControlWrite(fe, + CHCAL_FRAC_MOD_RF, 212992); + } + } + + return status; +} + +static u16 MXL_Hystersis_Test(struct dvb_frontend *fe, int Hystersis) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u16 status = 0; + + if (Hystersis == 1) + status += MXL_ControlWrite(fe, DN_BYPASS_AGC_I2C, 1); + + return status; +} +#endif +/* End: Reference driver code found in the Realtek driver that + * is copyright MaxLinear */ + +/* ---------------------------------------------------------------- + * Begin: Everything after here is new code to adapt the + * proprietary Realtek driver into a Linux API tuner. + * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + */ +static int mxl5005s_reset(struct dvb_frontend *fe) +{ + struct mxl5005s_state *state = fe->tuner_priv; + int ret = 0; + + u8 buf[2] = { 0xff, 0x00 }; + struct i2c_msg msg = { .addr = state->config->i2c_address, .flags = 0, + .buf = buf, .len = 2 }; + + dprintk(2, "%s()\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + printk(KERN_WARNING "mxl5005s I2C reset failed\n"); + ret = -EREMOTEIO; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return ret; +} + +/* Write a single byte to a single reg, latch the value if required by + * following the transaction with the latch byte. + */ +static int mxl5005s_writereg(struct dvb_frontend *fe, u8 reg, u8 val, int latch) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u8 buf[3] = { reg, val, MXL5005S_LATCH_BYTE }; + struct i2c_msg msg = { .addr = state->config->i2c_address, .flags = 0, + .buf = buf, .len = 3 }; + + if (latch == 0) + msg.len = 2; + + dprintk(2, "%s(0x%x, 0x%x, 0x%x)\n", __func__, reg, val, msg.addr); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + printk(KERN_WARNING "mxl5005s I2C write failed\n"); + return -EREMOTEIO; + } + return 0; +} + +static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable, + u8 *datatable, u8 len) +{ + int ret = 0, i; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + for (i = 0 ; i < len-1; i++) { + ret = mxl5005s_writereg(fe, addrtable[i], datatable[i], 0); + if (ret < 0) + break; + } + + ret = mxl5005s_writereg(fe, addrtable[i], datatable[i], 1); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return ret; +} + +static int mxl5005s_init(struct dvb_frontend *fe) +{ + dprintk(1, "%s()\n", __func__); + return mxl5005s_reconfigure(fe, MXL_QAM, MXL5005S_BANDWIDTH_6MHZ); +} + +static int mxl5005s_reconfigure(struct dvb_frontend *fe, u32 mod_type, + u32 bandwidth) +{ + struct mxl5005s_state *state = fe->tuner_priv; + + u8 AddrTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX]; + u8 ByteTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX]; + int TableLen; + + dprintk(1, "%s(type=%d, bw=%d)\n", __func__, mod_type, bandwidth); + + mxl5005s_reset(fe); + + /* Tuner initialization stage 0 */ + MXL_GetMasterControl(ByteTable, MC_SYNTH_RESET); + AddrTable[0] = MASTER_CONTROL_ADDR; + ByteTable[0] |= state->config->AgcMasterByte; + + mxl5005s_writeregs(fe, AddrTable, ByteTable, 1); + + mxl5005s_AssignTunerMode(fe, mod_type, bandwidth); + + /* Tuner initialization stage 1 */ + MXL_GetInitRegister(fe, AddrTable, ByteTable, &TableLen); + + mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen); + + return 0; +} + +static int mxl5005s_AssignTunerMode(struct dvb_frontend *fe, u32 mod_type, + u32 bandwidth) +{ + struct mxl5005s_state *state = fe->tuner_priv; + struct mxl5005s_config *c = state->config; + + InitTunerControls(fe); + + /* Set MxL5005S parameters. */ + MXL5005_TunerConfig( + fe, + c->mod_mode, + c->if_mode, + bandwidth, + c->if_freq, + c->xtal_freq, + c->agc_mode, + c->top, + c->output_load, + c->clock_out, + c->div_out, + c->cap_select, + c->rssi_enable, + mod_type, + c->tracking_filter); + + return 0; +} + +static int mxl5005s_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct mxl5005s_state *state = fe->tuner_priv; + u32 req_mode, req_bw = 0; + int ret; + + dprintk(1, "%s()\n", __func__); + + if (fe->ops.info.type == FE_ATSC) { + switch (params->u.vsb.modulation) { + case VSB_8: + req_mode = MXL_ATSC; break; + default: + case QAM_64: + case QAM_256: + case QAM_AUTO: + req_mode = MXL_QAM; break; + } + } else + req_mode = MXL_DVBT; + + /* Change tuner for new modulation type if reqd */ + if (req_mode != state->current_mode) { + switch (req_mode) { + case VSB_8: + case QAM_64: + case QAM_256: + case QAM_AUTO: + req_bw = MXL5005S_BANDWIDTH_6MHZ; + break; + default: + /* Assume DVB-T */ + switch (params->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + req_bw = MXL5005S_BANDWIDTH_6MHZ; + break; + case BANDWIDTH_7_MHZ: + req_bw = MXL5005S_BANDWIDTH_7MHZ; + break; + case BANDWIDTH_AUTO: + case BANDWIDTH_8_MHZ: + req_bw = MXL5005S_BANDWIDTH_8MHZ; + break; + } + } + + state->current_mode = req_mode; + ret = mxl5005s_reconfigure(fe, req_mode, req_bw); + + } else + ret = 0; + + if (ret == 0) { + dprintk(1, "%s() freq=%d\n", __func__, params->frequency); + ret = mxl5005s_SetRfFreqHz(fe, params->frequency); + } + + return ret; +} + +static int mxl5005s_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct mxl5005s_state *state = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); + + *frequency = state->RF_IN; + + return 0; +} + +static int mxl5005s_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct mxl5005s_state *state = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); + + *bandwidth = state->Chan_Bandwidth; + + return 0; +} + +static int mxl5005s_release(struct dvb_frontend *fe) +{ + dprintk(1, "%s()\n", __func__); + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static const struct dvb_tuner_ops mxl5005s_tuner_ops = { + .info = { + .name = "MaxLinear MXL5005S", + .frequency_min = 48000000, + .frequency_max = 860000000, + .frequency_step = 50000, + }, + + .release = mxl5005s_release, + .init = mxl5005s_init, + + .set_params = mxl5005s_set_params, + .get_frequency = mxl5005s_get_frequency, + .get_bandwidth = mxl5005s_get_bandwidth, +}; + +struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct mxl5005s_config *config) +{ + struct mxl5005s_state *state = NULL; + dprintk(1, "%s()\n", __func__); + + state = kzalloc(sizeof(struct mxl5005s_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + state->frontend = fe; + state->config = config; + state->i2c = i2c; + state->current_mode = MXL_QAM; + + printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n", + config->i2c_address); + + memcpy(&fe->ops.tuner_ops, &mxl5005s_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = state; + return fe; +} +EXPORT_SYMBOL(mxl5005s_attach); + +MODULE_DESCRIPTION("MaxLinear MXL5005S silicon tuner driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/common/tuners/mxl5005s.h new file mode 100644 index 00000000000..396db150bf0 --- /dev/null +++ b/drivers/media/common/tuners/mxl5005s.h @@ -0,0 +1,131 @@ +/* + MaxLinear MXL5005S VSB/QAM/DVBT tuner driver + + Copyright (C) 2008 MaxLinear + Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef __MXL5005S_H +#define __MXL5005S_H + +#include <linux/i2c.h> +#include "dvb_frontend.h" + +struct mxl5005s_config { + + /* 7 bit i2c address */ + u8 i2c_address; + +#define IF_FREQ_4570000HZ 4570000 +#define IF_FREQ_4571429HZ 4571429 +#define IF_FREQ_5380000HZ 5380000 +#define IF_FREQ_36000000HZ 36000000 +#define IF_FREQ_36125000HZ 36125000 +#define IF_FREQ_36166667HZ 36166667 +#define IF_FREQ_44000000HZ 44000000 + u32 if_freq; + +#define CRYSTAL_FREQ_4000000HZ 4000000 +#define CRYSTAL_FREQ_16000000HZ 16000000 +#define CRYSTAL_FREQ_25000000HZ 25000000 +#define CRYSTAL_FREQ_28800000HZ 28800000 + u32 xtal_freq; + +#define MXL_DUAL_AGC 0 +#define MXL_SINGLE_AGC 1 + u8 agc_mode; + +#define MXL_TF_DEFAULT 0 +#define MXL_TF_OFF 1 +#define MXL_TF_C 2 +#define MXL_TF_C_H 3 +#define MXL_TF_D 4 +#define MXL_TF_D_L 5 +#define MXL_TF_E 6 +#define MXL_TF_F 7 +#define MXL_TF_E_2 8 +#define MXL_TF_E_NA 9 +#define MXL_TF_G 10 + u8 tracking_filter; + +#define MXL_RSSI_DISABLE 0 +#define MXL_RSSI_ENABLE 1 + u8 rssi_enable; + +#define MXL_CAP_SEL_DISABLE 0 +#define MXL_CAP_SEL_ENABLE 1 + u8 cap_select; + +#define MXL_DIV_OUT_1 0 +#define MXL_DIV_OUT_4 1 + u8 div_out; + +#define MXL_CLOCK_OUT_DISABLE 0 +#define MXL_CLOCK_OUT_ENABLE 1 + u8 clock_out; + +#define MXL5005S_IF_OUTPUT_LOAD_200_OHM 200 +#define MXL5005S_IF_OUTPUT_LOAD_300_OHM 300 + u32 output_load; + +#define MXL5005S_TOP_5P5 55 +#define MXL5005S_TOP_7P2 72 +#define MXL5005S_TOP_9P2 92 +#define MXL5005S_TOP_11P0 110 +#define MXL5005S_TOP_12P9 129 +#define MXL5005S_TOP_14P7 147 +#define MXL5005S_TOP_16P8 168 +#define MXL5005S_TOP_19P4 194 +#define MXL5005S_TOP_21P2 212 +#define MXL5005S_TOP_23P2 232 +#define MXL5005S_TOP_25P2 252 +#define MXL5005S_TOP_27P1 271 +#define MXL5005S_TOP_29P2 292 +#define MXL5005S_TOP_31P7 317 +#define MXL5005S_TOP_34P9 349 + u32 top; + +#define MXL_ANALOG_MODE 0 +#define MXL_DIGITAL_MODE 1 + u8 mod_mode; + +#define MXL_ZERO_IF 0 +#define MXL_LOW_IF 1 + u8 if_mode; + + /* Stuff I don't know what to do with */ + u8 AgcMasterByte; +}; + +#if defined(CONFIG_MEDIA_TUNER_MXL5005S) || \ + (defined(CONFIG_MEDIA_TUNER_MXL5005S_MODULE) && defined(MODULE)) +extern struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct mxl5005s_config *config); +#else +static inline struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct mxl5005s_config *config) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_TUNER_MXL5005S */ + +#endif /* __MXL5005S_H */ + diff --git a/drivers/media/dvb/frontends/qt1010.c b/drivers/media/common/tuners/qt1010.c index 825aa1412e6..825aa1412e6 100644 --- a/drivers/media/dvb/frontends/qt1010.c +++ b/drivers/media/common/tuners/qt1010.c diff --git a/drivers/media/dvb/frontends/qt1010.h b/drivers/media/common/tuners/qt1010.h index 3ab4aa045c3..807fb7b6146 100644 --- a/drivers/media/dvb/frontends/qt1010.h +++ b/drivers/media/common/tuners/qt1010.h @@ -36,7 +36,7 @@ struct qt1010_config { * @param cfg tuner hw based configuration * @return fe pointer on success, NULL on failure */ -#if defined(CONFIG_DVB_TUNER_QT1010) || (defined(CONFIG_DVB_TUNER_QT1010_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_QT1010) || (defined(CONFIG_MEDIA_TUNER_QT1010_MODULE) && defined(MODULE)) extern struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct qt1010_config *cfg); @@ -45,9 +45,9 @@ static inline struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct qt1010_config *cfg) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_TUNER_QT1010 +#endif // CONFIG_MEDIA_TUNER_QT1010 #endif diff --git a/drivers/media/dvb/frontends/qt1010_priv.h b/drivers/media/common/tuners/qt1010_priv.h index 090cf475f09..090cf475f09 100644 --- a/drivers/media/dvb/frontends/qt1010_priv.h +++ b/drivers/media/common/tuners/qt1010_priv.h diff --git a/drivers/media/dvb/frontends/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index bca57099061..6fb5b458656 100644 --- a/drivers/media/dvb/frontends/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -125,16 +125,16 @@ int tda18271_read_regs(struct dvb_frontend *fe) unsigned char buf = 0x00; int ret; struct i2c_msg msg[] = { - { .addr = priv->i2c_addr, .flags = 0, + { .addr = priv->i2c_props.addr, .flags = 0, .buf = &buf, .len = 1 }, - { .addr = priv->i2c_addr, .flags = I2C_M_RD, + { .addr = priv->i2c_props.addr, .flags = I2C_M_RD, .buf = regs, .len = 16 } }; tda18271_i2c_gate_ctrl(fe, 1); /* read all registers */ - ret = i2c_transfer(priv->i2c_adap, msg, 2); + ret = i2c_transfer(priv->i2c_props.adap, msg, 2); tda18271_i2c_gate_ctrl(fe, 0); @@ -155,16 +155,16 @@ int tda18271_read_extended(struct dvb_frontend *fe) unsigned char buf = 0x00; int ret, i; struct i2c_msg msg[] = { - { .addr = priv->i2c_addr, .flags = 0, + { .addr = priv->i2c_props.addr, .flags = 0, .buf = &buf, .len = 1 }, - { .addr = priv->i2c_addr, .flags = I2C_M_RD, + { .addr = priv->i2c_props.addr, .flags = I2C_M_RD, .buf = regdump, .len = TDA18271_NUM_REGS } }; tda18271_i2c_gate_ctrl(fe, 1); /* read all registers */ - ret = i2c_transfer(priv->i2c_adap, msg, 2); + ret = i2c_transfer(priv->i2c_props.adap, msg, 2); tda18271_i2c_gate_ctrl(fe, 0); @@ -192,7 +192,7 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; unsigned char buf[TDA18271_NUM_REGS + 1]; - struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, + struct i2c_msg msg = { .addr = priv->i2c_props.addr, .flags = 0, .buf = buf, .len = len + 1 }; int i, ret; @@ -205,7 +205,7 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) tda18271_i2c_gate_ctrl(fe, 1); /* write registers */ - ret = i2c_transfer(priv->i2c_adap, &msg, 1); + ret = i2c_transfer(priv->i2c_props.adap, &msg, 1); tda18271_i2c_gate_ctrl(fe, 0); @@ -217,13 +217,28 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) /*---------------------------------------------------------------------*/ +int tda18271_charge_pump_source(struct dvb_frontend *fe, + enum tda18271_pll pll, int force) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + int r_cp = (pll == TDA18271_CAL_PLL) ? R_EB7 : R_EB4; + + regs[r_cp] &= ~0x20; + regs[r_cp] |= ((force & 1) << 5); + + return tda18271_write_regs(fe, r_cp, 1); +} + int tda18271_init_regs(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; tda_dbg("initializing registers for device @ %d-%04x\n", - i2c_adapter_id(priv->i2c_adap), priv->i2c_addr); + i2c_adapter_id(priv->i2c_props.adap), + priv->i2c_props.addr); /* initialize registers */ switch (priv->id) { @@ -310,7 +325,12 @@ int tda18271_init_regs(struct dvb_frontend *fe) regs[R_EB22] = 0x48; regs[R_EB23] = 0xb0; - tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); + if (priv->small_i2c) { + tda18271_write_regs(fe, 0x00, 0x10); + tda18271_write_regs(fe, 0x10, 0x10); + tda18271_write_regs(fe, 0x20, 0x07); + } else + tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); /* setup agc1 gain */ regs[R_EB17] = 0x00; @@ -349,24 +369,15 @@ int tda18271_init_regs(struct dvb_frontend *fe) regs[R_MD2] = 0x08; regs[R_MD3] = 0x00; - switch (priv->id) { - case TDA18271HDC1: - tda18271_write_regs(fe, R_EP3, 11); - break; - case TDA18271HDC2: - tda18271_write_regs(fe, R_EP3, 12); - break; - }; + tda18271_write_regs(fe, R_EP3, 11); if ((priv->id) == TDA18271HDC2) { /* main pll cp source on */ - regs[R_EB4] = 0x61; - tda18271_write_regs(fe, R_EB4, 1); + tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1); msleep(1); /* main pll cp source off */ - regs[R_EB4] = 0x41; - tda18271_write_regs(fe, R_EB4, 1); + tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0); } msleep(5); /* pll locking */ @@ -398,6 +409,7 @@ int tda18271_init_regs(struct dvb_frontend *fe) tda18271_write_regs(fe, R_EP3, 11); msleep(5); /* pll locking */ + /* launch detector */ tda18271_write_regs(fe, R_EP1, 1); msleep(5); /* wanted mid measurement */ @@ -474,16 +486,15 @@ int tda18271_set_standby_mode(struct dvb_frontend *fe, struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; - tda_dbg("sm = %d, sm_lt = %d, sm_xt = %d\n", sm, sm_lt, sm_xt); + if (tda18271_debug & DBG_ADV) + tda_dbg("sm = %d, sm_lt = %d, sm_xt = %d\n", sm, sm_lt, sm_xt); regs[R_EP3] &= ~0xe0; /* clear sm, sm_lt, sm_xt */ regs[R_EP3] |= sm ? (1 << 7) : 0 | sm_lt ? (1 << 6) : 0 | sm_xt ? (1 << 5) : 0; - tda18271_write_regs(fe, R_EP3, 1); - - return 0; + return tda18271_write_regs(fe, R_EP3, 1); } /*---------------------------------------------------------------------*/ @@ -497,7 +508,7 @@ int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) u32 div; int ret = tda18271_lookup_pll_map(fe, MAIN_PLL, &freq, &pd, &d); - if (ret < 0) + if (tda_fail(ret)) goto fail; regs[R_MPD] = (0x77 & pd); @@ -529,7 +540,7 @@ int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) u32 div; int ret = tda18271_lookup_pll_map(fe, CAL_PLL, &freq, &pd, &d); - if (ret < 0) + if (tda_fail(ret)) goto fail; regs[R_CPD] = pd; @@ -553,7 +564,7 @@ int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq) u8 val; int ret = tda18271_lookup_map(fe, BP_FILTER, freq, &val); - if (ret < 0) + if (tda_fail(ret)) goto fail; regs[R_EP1] &= ~0x07; /* clear bp filter bits */ @@ -570,7 +581,7 @@ int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq) u8 val; int ret = tda18271_lookup_map(fe, RF_CAL_KMCO, freq, &val); - if (ret < 0) + if (tda_fail(ret)) goto fail; regs[R_EB13] &= ~0x7c; /* clear k & m bits */ @@ -587,7 +598,7 @@ int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq) u8 val; int ret = tda18271_lookup_map(fe, RF_BAND, freq, &val); - if (ret < 0) + if (tda_fail(ret)) goto fail; regs[R_EP2] &= ~0xe0; /* clear rf band bits */ @@ -604,7 +615,7 @@ int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq) u8 val; int ret = tda18271_lookup_map(fe, GAIN_TAPER, freq, &val); - if (ret < 0) + if (tda_fail(ret)) goto fail; regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ @@ -621,7 +632,7 @@ int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq) u8 val; int ret = tda18271_lookup_map(fe, IR_MEASURE, freq, &val); - if (ret < 0) + if (tda_fail(ret)) goto fail; regs[R_EP5] &= ~0x07; @@ -637,11 +648,19 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - tda18271_lookup_map(fe, RF_CAL, freq, &val); + int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); + /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range + * for frequencies above 61.1 MHz. In these cases, the internal RF + * tracking filters calibration mechanism is used. + * + * There is no need to warn the user about this. + */ + if (ret < 0) + goto fail; regs[R_EB14] = val; - - return 0; +fail: + return ret; } /* diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index dfe72aaec38..93063c6fbbf 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -31,78 +31,81 @@ static int tda18271_cal_on_startup; module_param_named(cal, tda18271_cal_on_startup, int, 0644); MODULE_PARM_DESC(cal, "perform RF tracking filter calibration on startup"); -static LIST_HEAD(tda18271_list); static DEFINE_MUTEX(tda18271_list_mutex); +static LIST_HEAD(hybrid_tuner_instance_list); /*---------------------------------------------------------------------*/ -static int tda18271_ir_cal_init(struct dvb_frontend *fe) +static inline int charge_pump_source(struct dvb_frontend *fe, int force) { struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - - tda18271_read_regs(fe); + return tda18271_charge_pump_source(fe, + (priv->role == TDA18271_SLAVE) ? + TDA18271_CAL_PLL : + TDA18271_MAIN_PLL, force); +} - /* test IR_CAL_OK to see if we need init */ - if ((regs[R_EP1] & 0x08) == 0) - tda18271_init_regs(fe); +static inline void tda18271_set_if_notch(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; - return 0; + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x80; /* IF notch = 0 */ + break; + case TDA18271_DIGITAL: + regs[R_MPD] |= 0x80; /* IF notch = 1 */ + break; + } } -/* ------------------------------------------------------------------ */ - static int tda18271_channel_configuration(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std, - int radio) + struct tda18271_std_map_item *map, + u32 freq, u32 bw) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; + int ret; u32 N; /* update TV broadcast parameters */ /* set standard */ regs[R_EP3] &= ~0x1f; /* clear std bits */ - regs[R_EP3] |= std; + regs[R_EP3] |= (map->agc_mode << 3) | map->std; + + if (priv->id == TDA18271HDC2) { + /* set rfagc to high speed mode */ + regs[R_EP3] &= ~0x04; + } /* set cal mode to normal */ regs[R_EP4] &= ~0x03; - /* update IF output level & IF notch frequency */ + /* update IF output level */ regs[R_EP4] &= ~0x1c; /* clear if level bits */ + regs[R_EP4] |= (map->if_lvl << 2); - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x80; /* IF notch = 0 */ - break; - case TDA18271_DIGITAL: - regs[R_EP4] |= 0x04; /* IF level = 1 */ - regs[R_MPD] |= 0x80; /* IF notch = 1 */ - break; - } - - if (radio) - regs[R_EP4] |= 0x80; - else - regs[R_EP4] &= ~0x80; + /* update FM_RFn */ + regs[R_EP4] &= ~0x80; + regs[R_EP4] |= map->fm_rfn << 7; - /* update RF_TOP / IF_TOP */ - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_EB22] = 0x2c; - break; - case TDA18271_DIGITAL: - regs[R_EB22] = 0x37; - break; - } - tda18271_write_regs(fe, R_EB22, 1); + /* update rf top / if top */ + regs[R_EB22] = 0x00; + regs[R_EB22] |= map->rfagc_top; + ret = tda18271_write_regs(fe, R_EB22, 1); + if (tda_fail(ret)) + goto fail; /* --------------------------------------------------------------- */ /* disable Power Level Indicator */ regs[R_EP1] |= 0x40; + /* make sure thermometer is off */ + regs[R_TM] &= ~0x10; + /* frequency dependent parameters */ tda18271_calc_ir_measure(fe, &freq); @@ -117,8 +120,14 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, /* dual tuner and agc1 extra configuration */ - /* main vco when Master, cal vco when slave */ - regs[R_EB1] |= 0x04; /* FIXME: assumes master */ + switch (priv->role) { + case TDA18271_MASTER: + regs[R_EB1] |= 0x04; /* main vco */ + break; + case TDA18271_SLAVE: + regs[R_EB1] &= ~0x04; /* cal vco */ + break; + } /* agc1 always active */ regs[R_EB1] &= ~0x02; @@ -126,31 +135,54 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, /* agc1 has priority on agc2 */ regs[R_EB1] &= ~0x01; - tda18271_write_regs(fe, R_EB1, 1); + ret = tda18271_write_regs(fe, R_EB1, 1); + if (tda_fail(ret)) + goto fail; /* --------------------------------------------------------------- */ - N = freq + ifc; + N = map->if_freq * 1000 + freq; - /* FIXME: assumes master */ - tda18271_calc_main_pll(fe, N); - tda18271_write_regs(fe, R_MPD, 4); + switch (priv->role) { + case TDA18271_MASTER: + tda18271_calc_main_pll(fe, N); + tda18271_set_if_notch(fe); + tda18271_write_regs(fe, R_MPD, 4); + break; + case TDA18271_SLAVE: + tda18271_calc_cal_pll(fe, N); + tda18271_write_regs(fe, R_CPD, 4); - tda18271_write_regs(fe, R_TM, 7); + regs[R_MPD] = regs[R_CPD] & 0x7f; + tda18271_set_if_notch(fe); + tda18271_write_regs(fe, R_MPD, 1); + break; + } - /* main pll charge pump source */ - regs[R_EB4] |= 0x20; - tda18271_write_regs(fe, R_EB4, 1); + ret = tda18271_write_regs(fe, R_TM, 7); + if (tda_fail(ret)) + goto fail; + + /* force charge pump source */ + charge_pump_source(fe, 1); msleep(1); - /* normal operation for the main pll */ - regs[R_EB4] &= ~0x20; - tda18271_write_regs(fe, R_EB4, 1); + /* return pll to normal operation */ + charge_pump_source(fe, 0); - msleep(5); + msleep(20); - return 0; + if (priv->id == TDA18271HDC2) { + /* set rfagc to normal speed mode */ + if (map->fm_rfn) + regs[R_EP3] &= ~0x04; + else + regs[R_EP3] |= 0x04; + ret = tda18271_write_regs(fe, R_EP3, 1); + } +fail: + return ret; } static int tda18271_read_thermometer(struct dvb_frontend *fe) @@ -195,17 +227,21 @@ static int tda18271_read_thermometer(struct dvb_frontend *fe) return tm; } -static int tda18271_rf_tracking_filters_correction(struct dvb_frontend *fe, - u32 freq) +/* ------------------------------------------------------------------ */ + +static int tda18271c2_rf_tracking_filters_correction(struct dvb_frontend *fe, + u32 freq) { struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state; unsigned char *regs = priv->tda18271_regs; - int tm_current, rfcal_comp, approx, i; + int tm_current, rfcal_comp, approx, i, ret; u8 dc_over_dt, rf_tab; /* power up */ - tda18271_set_standby_mode(fe, 0, 0, 0); + ret = tda18271_set_standby_mode(fe, 0, 0, 0); + if (tda_fail(ret)) + goto fail; /* read die current temperature */ tm_current = tda18271_read_thermometer(fe); @@ -216,8 +252,8 @@ static int tda18271_rf_tracking_filters_correction(struct dvb_frontend *fe, rf_tab = regs[R_EB14]; i = tda18271_lookup_rf_band(fe, &freq, NULL); - if (i < 0) - return -EINVAL; + if (tda_fail(i)) + return i; if ((0 == map[i].rf3) || (freq / 1000 < map[i].rf2)) { approx = map[i].rf_a1 * @@ -238,35 +274,42 @@ static int tda18271_rf_tracking_filters_correction(struct dvb_frontend *fe, rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal); regs[R_EB14] = approx + rfcal_comp; - tda18271_write_regs(fe, R_EB14, 1); - - return 0; + ret = tda18271_write_regs(fe, R_EB14, 1); +fail: + return ret; } static int tda18271_por(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; + int ret; /* power up detector 1 */ regs[R_EB12] &= ~0x20; - tda18271_write_regs(fe, R_EB12, 1); + ret = tda18271_write_regs(fe, R_EB12, 1); + if (tda_fail(ret)) + goto fail; regs[R_EB18] &= ~0x80; /* turn agc1 loop on */ regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */ - tda18271_write_regs(fe, R_EB18, 1); + ret = tda18271_write_regs(fe, R_EB18, 1); + if (tda_fail(ret)) + goto fail; regs[R_EB21] |= 0x03; /* set agc2_gain to -6 dB */ /* POR mode */ - tda18271_set_standby_mode(fe, 1, 0, 0); + ret = tda18271_set_standby_mode(fe, 1, 0, 0); + if (tda_fail(ret)) + goto fail; /* disable 1.5 MHz low pass filter */ regs[R_EB23] &= ~0x04; /* forcelp_fc2_en = 0 */ regs[R_EB23] &= ~0x02; /* XXX: lp_fc[2] = 0 */ - tda18271_write_regs(fe, R_EB21, 3); - - return 0; + ret = tda18271_write_regs(fe, R_EB21, 3); +fail: + return ret; } static int tda18271_calibrate_rf(struct dvb_frontend *fe, u32 freq) @@ -296,12 +339,10 @@ static int tda18271_calibrate_rf(struct dvb_frontend *fe, u32 freq) tda18271_write_regs(fe, R_EB13, 1); /* main pll charge pump source */ - regs[R_EB4] |= 0x20; - tda18271_write_regs(fe, R_EB4, 1); + tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1); /* cal pll charge pump source */ - regs[R_EB7] |= 0x20; - tda18271_write_regs(fe, R_EB7, 1); + tda18271_charge_pump_source(fe, TDA18271_CAL_PLL, 1); /* force dcdc converter to 0 V */ regs[R_EB14] = 0x00; @@ -320,8 +361,8 @@ static int tda18271_calibrate_rf(struct dvb_frontend *fe, u32 freq) /* set the internal calibration signal */ N = freq; - tda18271_calc_main_pll(fe, N); - tda18271_write_regs(fe, R_MPD, 4); + tda18271_calc_cal_pll(fe, N); + tda18271_write_regs(fe, R_CPD, 4); /* downconvert internal calibration */ N += 1000000; @@ -339,14 +380,12 @@ static int tda18271_calibrate_rf(struct dvb_frontend *fe, u32 freq) /* --------------------------------------------------------------- */ /* normal operation for the main pll */ - regs[R_EB4] &= ~0x20; - tda18271_write_regs(fe, R_EB4, 1); + tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0); /* normal operation for the cal pll */ - regs[R_EB7] &= ~0x20; - tda18271_write_regs(fe, R_EB7, 1); + tda18271_charge_pump_source(fe, TDA18271_CAL_PLL, 0); - msleep(5); /* plls locking */ + msleep(10); /* plls locking */ /* launch the rf tracking filters calibration */ regs[R_EB20] |= 0x20; @@ -381,7 +420,7 @@ static int tda18271_powerscan(struct dvb_frontend *fe, { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; - int sgn, bcal, count, wait; + int sgn, bcal, count, wait, ret; u8 cid_target; u16 count_limit; u32 freq; @@ -413,7 +452,9 @@ static int tda18271_powerscan(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EP2, 1); /* read power detection info, stored in EB10 */ - tda18271_read_extended(fe); + ret = tda18271_read_extended(fe); + if (tda_fail(ret)) + return ret; /* algorithm initialization */ sgn = 1; @@ -439,11 +480,13 @@ static int tda18271_powerscan(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EP2, 1); /* read power detection info, stored in EB10 */ - tda18271_read_extended(fe); + ret = tda18271_read_extended(fe); + if (tda_fail(ret)) + return ret; count += 200; - if (count < count_limit) + if (count <= count_limit) continue; if (sgn <= 0) @@ -470,6 +513,7 @@ static int tda18271_powerscan_init(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; + int ret; /* set standard to digital */ regs[R_EP3] &= ~0x1f; /* clear std bits */ @@ -478,13 +522,17 @@ static int tda18271_powerscan_init(struct dvb_frontend *fe) /* set cal mode to normal */ regs[R_EP4] &= ~0x03; - /* update IF output level & IF notch frequency */ + /* update IF output level */ regs[R_EP4] &= ~0x1c; /* clear if level bits */ - tda18271_write_regs(fe, R_EP3, 2); + ret = tda18271_write_regs(fe, R_EP3, 2); + if (tda_fail(ret)) + goto fail; regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */ - tda18271_write_regs(fe, R_EB18, 1); + ret = tda18271_write_regs(fe, R_EB18, 1); + if (tda_fail(ret)) + goto fail; regs[R_EB21] &= ~0x03; /* set agc2_gain to -15 dB */ @@ -492,9 +540,9 @@ static int tda18271_powerscan_init(struct dvb_frontend *fe) regs[R_EB23] |= 0x04; /* forcelp_fc2_en = 1 */ regs[R_EB23] |= 0x02; /* lp_fc[2] = 1 */ - tda18271_write_regs(fe, R_EB21, 3); - - return 0; + ret = tda18271_write_regs(fe, R_EB21, 3); +fail: + return ret; } static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) @@ -513,7 +561,7 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) i = tda18271_lookup_rf_band(fe, &freq, NULL); - if (i < 0) + if (tda_fail(i)) return i; rf_default[RF1] = 1000 * map[i].rf1_def; @@ -527,6 +575,8 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) /* look for optimized calibration frequency */ bcal = tda18271_powerscan(fe, &rf_default[rf], &rf_freq[rf]); + if (tda_fail(bcal)) + return bcal; tda18271_calc_rf_cal(fe, &rf_freq[rf]); prog_tab[rf] = regs[R_EB14]; @@ -567,30 +617,38 @@ static int tda18271_calc_rf_filter_curve(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned int i; + int ret; tda_info("tda18271: performing RF tracking filter calibration\n"); /* wait for die temperature stabilization */ msleep(200); - tda18271_powerscan_init(fe); + ret = tda18271_powerscan_init(fe); + if (tda_fail(ret)) + goto fail; /* rf band calibration */ - for (i = 0; priv->rf_cal_state[i].rfmax != 0; i++) + for (i = 0; priv->rf_cal_state[i].rfmax != 0; i++) { + ret = tda18271_rf_tracking_filters_init(fe, 1000 * priv->rf_cal_state[i].rfmax); + if (tda_fail(ret)) + goto fail; + } priv->tm_rfcal = tda18271_read_thermometer(fe); - - return 0; +fail: + return ret; } /* ------------------------------------------------------------------ */ -static int tda18271_rf_cal_init(struct dvb_frontend *fe) +static int tda18271c2_rf_cal_init(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; + int ret; /* test RF_CAL_OK to see if we need init */ if ((regs[R_EP1] & 0x10) == 0) @@ -599,74 +657,32 @@ static int tda18271_rf_cal_init(struct dvb_frontend *fe) if (priv->cal_initialized) return 0; - tda18271_calc_rf_filter_curve(fe); + ret = tda18271_calc_rf_filter_curve(fe); + if (tda_fail(ret)) + goto fail; - tda18271_por(fe); + ret = tda18271_por(fe); + if (tda_fail(ret)) + goto fail; tda_info("tda18271: RF tracking filter calibration complete\n"); priv->cal_initialized = true; - - return 0; -} - -static int tda18271_init(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - - mutex_lock(&priv->lock); - - /* power up */ - tda18271_set_standby_mode(fe, 0, 0, 0); - - /* initialization */ - tda18271_ir_cal_init(fe); - - if (priv->id == TDA18271HDC2) - tda18271_rf_cal_init(fe); - - mutex_unlock(&priv->lock); - - return 0; -} - -static int tda18271c2_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std, int radio) -{ - struct tda18271_priv *priv = fe->tuner_priv; - - tda_dbg("freq = %d, ifc = %d\n", freq, ifc); - - tda18271_init(fe); - - mutex_lock(&priv->lock); - - tda18271_rf_tracking_filters_correction(fe, freq); - - tda18271_channel_configuration(fe, ifc, freq, bw, std, radio); - - mutex_unlock(&priv->lock); - - return 0; + goto end; +fail: + tda_info("tda18271: RF tracking filter calibration failed!\n"); +end: + return ret; } -/* ------------------------------------------------------------------ */ - -static int tda18271c1_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std, int radio) +static int tda18271c1_rf_tracking_filter_calibration(struct dvb_frontend *fe, + u32 freq, u32 bw) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; + int ret; u32 N = 0; - tda18271_init(fe); - - mutex_lock(&priv->lock); - - tda_dbg("freq = %d, ifc = %d\n", freq, ifc); - - /* RF tracking filter calibration */ - /* calculate bp filter */ tda18271_calc_bp_filter(fe, &freq); tda18271_write_regs(fe, R_EP1, 1); @@ -713,7 +729,10 @@ static int tda18271c1_tune(struct dvb_frontend *fe, tda18271_calc_main_pll(fe, N); - tda18271_write_regs(fe, R_EP3, 11); + ret = tda18271_write_regs(fe, R_EP3, 11); + if (tda_fail(ret)) + return ret; + msleep(5); /* RF tracking filter calibration initialization */ /* search for K,M,CO for RF calibration */ @@ -737,7 +756,7 @@ static int tda18271c1_tune(struct dvb_frontend *fe, regs[R_EB7] = 0x40; tda18271_write_regs(fe, R_EB7, 1); - msleep(10); + msleep(10); /* pll locking */ regs[R_EB20] = 0xec; tda18271_write_regs(fe, R_EB20, 1); @@ -752,73 +771,80 @@ static int tda18271c1_tune(struct dvb_frontend *fe, if (0 == tda18271_calc_rf_cal(fe, &freq)) tda18271_write_regs(fe, R_EB14, 1); - /* Channel Configuration */ - - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_EB22] = 0x2c; - break; - case TDA18271_DIGITAL: - regs[R_EB22] = 0x37; - break; - } - tda18271_write_regs(fe, R_EB22, 1); - - regs[R_EP1] |= 0x40; /* set dis power level on */ + return 0; +} - /* set standard */ - regs[R_EP3] &= ~0x1f; /* clear std bits */ +/* ------------------------------------------------------------------ */ - /* see table 22 */ - regs[R_EP3] |= std; +static int tda18271_ir_cal_init(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + int ret; - regs[R_EP4] &= ~0x03; /* set cal mode to normal */ + ret = tda18271_read_regs(fe); + if (tda_fail(ret)) + goto fail; - regs[R_EP4] &= ~0x1c; /* clear if level bits */ - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x80; /* IF notch = 0 */ - break; - case TDA18271_DIGITAL: - regs[R_EP4] |= 0x04; - regs[R_MPD] |= 0x80; - break; - } + /* test IR_CAL_OK to see if we need init */ + if ((regs[R_EP1] & 0x08) == 0) + ret = tda18271_init_regs(fe); +fail: + return ret; +} - if (radio) - regs[R_EP4] |= 0x80; - else - regs[R_EP4] &= ~0x80; +static int tda18271_init(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + int ret; - /* image rejection validity */ - tda18271_calc_ir_measure(fe, &freq); + mutex_lock(&priv->lock); - /* calculate MAIN PLL */ - N = freq + ifc; + /* power up */ + ret = tda18271_set_standby_mode(fe, 0, 0, 0); + if (tda_fail(ret)) + goto fail; - tda18271_calc_main_pll(fe, N); + /* initialization */ + ret = tda18271_ir_cal_init(fe); + if (tda_fail(ret)) + goto fail; - tda18271_write_regs(fe, R_TM, 15); - msleep(5); + if (priv->id == TDA18271HDC2) + tda18271c2_rf_cal_init(fe); +fail: mutex_unlock(&priv->lock); - return 0; + return ret; } -static inline int tda18271_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std, int radio) +static int tda18271_tune(struct dvb_frontend *fe, + struct tda18271_std_map_item *map, u32 freq, u32 bw) { struct tda18271_priv *priv = fe->tuner_priv; - int ret = -EINVAL; + int ret; + + tda_dbg("freq = %d, ifc = %d, bw = %d, agc_mode = %d, std = %d\n", + freq, map->if_freq, bw, map->agc_mode, map->std); + + ret = tda18271_init(fe); + if (tda_fail(ret)) + goto fail; + + mutex_lock(&priv->lock); switch (priv->id) { case TDA18271HDC1: - ret = tda18271c1_tune(fe, ifc, freq, bw, std, radio); + tda18271c1_rf_tracking_filter_calibration(fe, freq, bw); break; case TDA18271HDC2: - ret = tda18271c2_tune(fe, ifc, freq, bw, std, radio); + tda18271c2_rf_tracking_filters_correction(fe, freq); break; } + ret = tda18271_channel_configuration(fe, map, freq, bw); + + mutex_unlock(&priv->lock); +fail: return ret; } @@ -829,9 +855,8 @@ static int tda18271_set_params(struct dvb_frontend *fe, { struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_std_map *std_map = &priv->std; + struct tda18271_std_map_item *map; int ret; - u8 std; - u16 sgIF; u32 bw, freq = params->frequency; priv->mode = TDA18271_DIGITAL; @@ -840,13 +865,11 @@ static int tda18271_set_params(struct dvb_frontend *fe, switch (params->u.vsb.modulation) { case VSB_8: case VSB_16: - std = std_map->atsc_6.std_bits; - sgIF = std_map->atsc_6.if_freq; + map = &std_map->atsc_6; break; case QAM_64: case QAM_256: - std = std_map->qam_6.std_bits; - sgIF = std_map->qam_6.if_freq; + map = &std_map->qam_6; break; default: tda_warn("modulation not set!\n"); @@ -861,18 +884,15 @@ static int tda18271_set_params(struct dvb_frontend *fe, switch (params->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: bw = 6000000; - std = std_map->dvbt_6.std_bits; - sgIF = std_map->dvbt_6.if_freq; + map = &std_map->dvbt_6; break; case BANDWIDTH_7_MHZ: bw = 7000000; - std = std_map->dvbt_7.std_bits; - sgIF = std_map->dvbt_7.if_freq; + map = &std_map->dvbt_7; break; case BANDWIDTH_8_MHZ: bw = 8000000; - std = std_map->dvbt_8.std_bits; - sgIF = std_map->dvbt_8.if_freq; + map = &std_map->dvbt_8; break; default: tda_warn("bandwidth not set!\n"); @@ -887,9 +907,9 @@ static int tda18271_set_params(struct dvb_frontend *fe, if (fe->ops.analog_ops.standby) fe->ops.analog_ops.standby(fe); - ret = tda18271_tune(fe, sgIF * 1000, freq, bw, std, 0); + ret = tda18271_tune(fe, map, freq, bw); - if (ret < 0) + if (tda_fail(ret)) goto fail; priv->frequency = freq; @@ -904,59 +924,48 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, { struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_std_map *std_map = &priv->std; + struct tda18271_std_map_item *map; char *mode; - int ret, radio = 0; - u8 std; - u16 sgIF; + int ret; u32 freq = params->frequency * 62500; priv->mode = TDA18271_ANALOG; if (params->mode == V4L2_TUNER_RADIO) { - radio = 1; freq = freq / 1000; - std = std_map->fm_radio.std_bits; - sgIF = std_map->fm_radio.if_freq; + map = &std_map->fm_radio; mode = "fm"; } else if (params->std & V4L2_STD_MN) { - std = std_map->atv_mn.std_bits; - sgIF = std_map->atv_mn.if_freq; + map = &std_map->atv_mn; mode = "MN"; } else if (params->std & V4L2_STD_B) { - std = std_map->atv_b.std_bits; - sgIF = std_map->atv_b.if_freq; + map = &std_map->atv_b; mode = "B"; } else if (params->std & V4L2_STD_GH) { - std = std_map->atv_gh.std_bits; - sgIF = std_map->atv_gh.if_freq; + map = &std_map->atv_gh; mode = "GH"; } else if (params->std & V4L2_STD_PAL_I) { - std = std_map->atv_i.std_bits; - sgIF = std_map->atv_i.if_freq; + map = &std_map->atv_i; mode = "I"; } else if (params->std & V4L2_STD_DK) { - std = std_map->atv_dk.std_bits; - sgIF = std_map->atv_dk.if_freq; + map = &std_map->atv_dk; mode = "DK"; } else if (params->std & V4L2_STD_SECAM_L) { - std = std_map->atv_l.std_bits; - sgIF = std_map->atv_l.if_freq; + map = &std_map->atv_l; mode = "L"; } else if (params->std & V4L2_STD_SECAM_LC) { - std = std_map->atv_lc.std_bits; - sgIF = std_map->atv_lc.if_freq; + map = &std_map->atv_lc; mode = "L'"; } else { - std = std_map->atv_i.std_bits; - sgIF = std_map->atv_i.if_freq; + map = &std_map->atv_i; mode = "xx"; } tda_dbg("setting tda18271 to system %s\n", mode); - ret = tda18271_tune(fe, sgIF * 1000, freq, 0, std, radio); + ret = tda18271_tune(fe, map, freq, 0); - if (ret < 0) + if (tda_fail(ret)) goto fail; priv->frequency = freq; @@ -968,16 +977,17 @@ fail: static int tda18271_sleep(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; + int ret; mutex_lock(&priv->lock); /* standby mode w/ slave tuner output * & loop thru & xtal oscillator on */ - tda18271_set_standby_mode(fe, 1, 0, 0); + ret = tda18271_set_standby_mode(fe, 1, 0, 0); mutex_unlock(&priv->lock); - return 0; + return ret; } static int tda18271_release(struct dvb_frontend *fe) @@ -986,16 +996,9 @@ static int tda18271_release(struct dvb_frontend *fe) mutex_lock(&tda18271_list_mutex); - priv->count--; + if (priv) + hybrid_tuner_release_state(priv); - if (!priv->count) { - tda_dbg("destroying instance @ %d-%04x\n", - i2c_adapter_id(priv->i2c_adap), - priv->i2c_addr); - list_del(&priv->tda18271_list); - - kfree(priv); - } mutex_unlock(&tda18271_list_mutex); fe->tuner_priv = NULL; @@ -1020,15 +1023,20 @@ static int tda18271_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) /* ------------------------------------------------------------------ */ #define tda18271_update_std(std_cfg, name) do { \ - if (map->std_cfg.if_freq + map->std_cfg.std_bits > 0) { \ + if (map->std_cfg.if_freq + \ + map->std_cfg.agc_mode + map->std_cfg.std + \ + map->std_cfg.if_lvl + map->std_cfg.rfagc_top > 0) { \ tda_dbg("Using custom std config for %s\n", name); \ memcpy(&std->std_cfg, &map->std_cfg, \ sizeof(struct tda18271_std_map_item)); \ } } while (0) #define tda18271_dump_std_item(std_cfg, name) do { \ - tda_dbg("(%s) if freq = %d, std bits = 0x%02x\n", \ - name, std->std_cfg.if_freq, std->std_cfg.std_bits); \ + tda_dbg("(%s) if_freq = %d, agc_mode = %d, std = %d, " \ + "if_lvl = %d, rfagc_top = 0x%02x\n", \ + name, std->std_cfg.if_freq, \ + std->std_cfg.agc_mode, std->std_cfg.std, \ + std->std_cfg.if_lvl, std->std_cfg.rfagc_top); \ } while (0) static int tda18271_dump_std_map(struct dvb_frontend *fe) @@ -1037,20 +1045,20 @@ static int tda18271_dump_std_map(struct dvb_frontend *fe) struct tda18271_std_map *std = &priv->std; tda_dbg("========== STANDARD MAP SETTINGS ==========\n"); - tda18271_dump_std_item(fm_radio, "fm"); - tda18271_dump_std_item(atv_b, "pal b"); - tda18271_dump_std_item(atv_dk, "pal dk"); - tda18271_dump_std_item(atv_gh, "pal gh"); - tda18271_dump_std_item(atv_i, "pal i"); - tda18271_dump_std_item(atv_l, "pal l"); - tda18271_dump_std_item(atv_lc, "pal l'"); + tda18271_dump_std_item(fm_radio, " fm "); + tda18271_dump_std_item(atv_b, "atv b "); + tda18271_dump_std_item(atv_dk, "atv dk"); + tda18271_dump_std_item(atv_gh, "atv gh"); + tda18271_dump_std_item(atv_i, "atv i "); + tda18271_dump_std_item(atv_l, "atv l "); + tda18271_dump_std_item(atv_lc, "atv l'"); tda18271_dump_std_item(atv_mn, "atv mn"); tda18271_dump_std_item(atsc_6, "atsc 6"); tda18271_dump_std_item(dvbt_6, "dvbt 6"); tda18271_dump_std_item(dvbt_7, "dvbt 7"); tda18271_dump_std_item(dvbt_8, "dvbt 8"); - tda18271_dump_std_item(qam_6, "qam 6"); - tda18271_dump_std_item(qam_8, "qam 8"); + tda18271_dump_std_item(qam_6, "qam 6 "); + tda18271_dump_std_item(qam_8, "qam 8 "); return 0; } @@ -1109,7 +1117,8 @@ static int tda18271_get_id(struct dvb_frontend *fe) } tda_info("%s detected @ %d-%04x%s\n", name, - i2c_adapter_id(priv->i2c_adap), priv->i2c_addr, + i2c_adapter_id(priv->i2c_props.adap), + priv->i2c_props.addr, (0 == ret) ? "" : ", device not supported."); return ret; @@ -1136,59 +1145,51 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, struct tda18271_config *cfg) { struct tda18271_priv *priv = NULL; - int state_found = 0; + int instance; mutex_lock(&tda18271_list_mutex); - list_for_each_entry(priv, &tda18271_list, tda18271_list) { - if ((i2c_adapter_id(priv->i2c_adap) == i2c_adapter_id(i2c)) && - (priv->i2c_addr == addr)) { - tda_dbg("attaching existing tuner @ %d-%04x\n", - i2c_adapter_id(priv->i2c_adap), - priv->i2c_addr); - priv->count++; - fe->tuner_priv = priv; - state_found = 1; - /* allow dvb driver to override i2c gate setting */ - if ((cfg) && (cfg->gate != TDA18271_GATE_ANALOG)) - priv->gate = cfg->gate; - break; - } - } - if (state_found == 0) { - tda_dbg("creating new tuner instance @ %d-%04x\n", - i2c_adapter_id(i2c), addr); - - priv = kzalloc(sizeof(struct tda18271_priv), GFP_KERNEL); - if (priv == NULL) { - mutex_unlock(&tda18271_list_mutex); - return NULL; - } - - priv->i2c_addr = addr; - priv->i2c_adap = i2c; + instance = hybrid_tuner_request_state(struct tda18271_priv, priv, + hybrid_tuner_instance_list, + i2c, addr, "tda18271"); + switch (instance) { + case 0: + goto fail; + break; + case 1: + /* new tuner instance */ priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; + priv->role = (cfg) ? cfg->role : TDA18271_MASTER; priv->cal_initialized = false; mutex_init(&priv->lock); - priv->count++; fe->tuner_priv = priv; - list_add_tail(&priv->tda18271_list, &tda18271_list); + if (cfg) + priv->small_i2c = cfg->small_i2c; - if (tda18271_get_id(fe) < 0) + if (tda_fail(tda18271_get_id(fe))) goto fail; - if (tda18271_assign_map_layout(fe) < 0) + if (tda_fail(tda18271_assign_map_layout(fe))) goto fail; mutex_lock(&priv->lock); tda18271_init_regs(fe); if ((tda18271_cal_on_startup) && (priv->id == TDA18271HDC2)) - tda18271_rf_cal_init(fe); + tda18271c2_rf_cal_init(fe); mutex_unlock(&priv->lock); + break; + default: + /* existing tuner instance */ + fe->tuner_priv = priv; + + /* allow dvb driver to override i2c gate setting */ + if ((cfg) && (cfg->gate != TDA18271_GATE_ANALOG)) + priv->gate = cfg->gate; + break; } /* override default std map with values in config struct */ @@ -1200,7 +1201,7 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, sizeof(struct dvb_tuner_ops)); - if (tda18271_debug & DBG_MAP) + if (tda18271_debug & (DBG_MAP | DBG_ADV)) tda18271_dump_std_map(fe); return fe; @@ -1214,7 +1215,7 @@ EXPORT_SYMBOL_GPL(tda18271_attach); MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver"); MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.2"); +MODULE_VERSION("0.3"); /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/common/tuners/tda18271-maps.c index e94afcfdc5b..83e7561960c 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/common/tuners/tda18271-maps.c @@ -1187,37 +1187,65 @@ fail: /*---------------------------------------------------------------------*/ static struct tda18271_std_map tda18271c1_std_map = { - .fm_radio = { .if_freq = 1250, .std_bits = 0x18 }, - .atv_b = { .if_freq = 6750, .std_bits = 0x0e }, - .atv_dk = { .if_freq = 7750, .std_bits = 0x0f }, - .atv_gh = { .if_freq = 7750, .std_bits = 0x0f }, - .atv_i = { .if_freq = 7750, .std_bits = 0x0f }, - .atv_l = { .if_freq = 7750, .std_bits = 0x0f }, - .atv_lc = { .if_freq = 1250, .std_bits = 0x0f }, - .atv_mn = { .if_freq = 5750, .std_bits = 0x0d }, - .atsc_6 = { .if_freq = 3250, .std_bits = 0x1c }, - .dvbt_6 = { .if_freq = 3300, .std_bits = 0x1c }, - .dvbt_7 = { .if_freq = 3800, .std_bits = 0x1d }, - .dvbt_8 = { .if_freq = 4300, .std_bits = 0x1e }, - .qam_6 = { .if_freq = 4000, .std_bits = 0x1d }, - .qam_8 = { .if_freq = 5000, .std_bits = 0x1f }, + .fm_radio = { .if_freq = 1250, .fm_rfn = 1, .agc_mode = 3, .std = 0, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x18 */ + .atv_b = { .if_freq = 6750, .fm_rfn = 0, .agc_mode = 1, .std = 6, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */ + .atv_dk = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */ + .atv_gh = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */ + .atv_i = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */ + .atv_l = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */ + .atv_lc = { .if_freq = 1250, .fm_rfn = 0, .agc_mode = 1, .std = 7, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */ + .atv_mn = { .if_freq = 5750, .fm_rfn = 0, .agc_mode = 1, .std = 5, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0d */ + .atsc_6 = { .if_freq = 3250, .fm_rfn = 0, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */ + .dvbt_6 = { .if_freq = 3300, .fm_rfn = 0, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */ + .dvbt_7 = { .if_freq = 3800, .fm_rfn = 0, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */ + .dvbt_8 = { .if_freq = 4300, .fm_rfn = 0, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1e */ + .qam_6 = { .if_freq = 4000, .fm_rfn = 0, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */ + .qam_8 = { .if_freq = 5000, .fm_rfn = 0, .agc_mode = 3, .std = 7, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1f */ }; static struct tda18271_std_map tda18271c2_std_map = { - .fm_radio = { .if_freq = 1250, .std_bits = 0x18 }, - .atv_b = { .if_freq = 6000, .std_bits = 0x0d }, - .atv_dk = { .if_freq = 6900, .std_bits = 0x0e }, - .atv_gh = { .if_freq = 7100, .std_bits = 0x0e }, - .atv_i = { .if_freq = 7250, .std_bits = 0x0e }, - .atv_l = { .if_freq = 6900, .std_bits = 0x0e }, - .atv_lc = { .if_freq = 1250, .std_bits = 0x0e }, - .atv_mn = { .if_freq = 5400, .std_bits = 0x0c }, - .atsc_6 = { .if_freq = 3250, .std_bits = 0x1c }, - .dvbt_6 = { .if_freq = 3300, .std_bits = 0x1c }, - .dvbt_7 = { .if_freq = 3500, .std_bits = 0x1c }, - .dvbt_8 = { .if_freq = 4000, .std_bits = 0x1d }, - .qam_6 = { .if_freq = 4000, .std_bits = 0x1d }, - .qam_8 = { .if_freq = 5000, .std_bits = 0x1f }, + .fm_radio = { .if_freq = 1250, .fm_rfn = 1, .agc_mode = 3, .std = 0, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x18 */ + .atv_b = { .if_freq = 6000, .fm_rfn = 0, .agc_mode = 1, .std = 5, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0d */ + .atv_dk = { .if_freq = 6900, .fm_rfn = 0, .agc_mode = 1, .std = 6, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */ + .atv_gh = { .if_freq = 7100, .fm_rfn = 0, .agc_mode = 1, .std = 6, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */ + .atv_i = { .if_freq = 7250, .fm_rfn = 0, .agc_mode = 1, .std = 6, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */ + .atv_l = { .if_freq = 6900, .fm_rfn = 0, .agc_mode = 1, .std = 6, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */ + .atv_lc = { .if_freq = 1250, .fm_rfn = 0, .agc_mode = 1, .std = 6, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */ + .atv_mn = { .if_freq = 5400, .fm_rfn = 0, .agc_mode = 1, .std = 4, + .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0c */ + .atsc_6 = { .if_freq = 3250, .fm_rfn = 0, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */ + .dvbt_6 = { .if_freq = 3300, .fm_rfn = 0, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */ + .dvbt_7 = { .if_freq = 3500, .fm_rfn = 0, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */ + .dvbt_8 = { .if_freq = 4000, .fm_rfn = 0, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */ + .qam_6 = { .if_freq = 4000, .fm_rfn = 0, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */ + .qam_8 = { .if_freq = 5000, .fm_rfn = 0, .agc_mode = 3, .std = 7, + .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1f */ }; /*---------------------------------------------------------------------*/ diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h index 7b939a5325f..81a739365f8 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/common/tuners/tda18271-priv.h @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/mutex.h> +#include "tuner-i2c.h" #include "tda18271.h" #define R_ID 0x00 /* ID byte */ @@ -85,6 +86,11 @@ struct tda18271_rf_tracking_filter_cal { int rf_b2; }; +enum tda18271_pll { + TDA18271_MAIN_PLL, + TDA18271_CAL_PLL, +}; + enum tda18271_mode { TDA18271_ANALOG, TDA18271_DIGITAL, @@ -98,19 +104,19 @@ enum tda18271_ver { }; struct tda18271_priv { - u8 i2c_addr; - struct i2c_adapter *i2c_adap; unsigned char tda18271_regs[TDA18271_NUM_REGS]; - struct list_head tda18271_list; + struct list_head hybrid_tuner_instance_list; + struct tuner_i2c_props i2c_props; enum tda18271_mode mode; + enum tda18271_role role; enum tda18271_i2c_gate gate; enum tda18271_ver id; - unsigned int count; unsigned int tm_rfcal; unsigned int cal_initialized:1; + unsigned int small_i2c:1; struct tda18271_map_layout *maps; struct tda18271_std_map std; @@ -133,7 +139,7 @@ extern int tda18271_debug; #define DBG_CAL 16 #define tda_printk(kern, fmt, arg...) \ - printk(kern "%s: " fmt, __FUNCTION__, ##arg) + printk(kern "%s: " fmt, __func__, ##arg) #define dprintk(kern, lvl, fmt, arg...) do {\ if (tda18271_debug & lvl) \ @@ -147,6 +153,15 @@ extern int tda18271_debug; #define tda_reg(fmt, arg...) dprintk(KERN_DEBUG, DBG_REG, fmt, ##arg) #define tda_cal(fmt, arg...) dprintk(KERN_DEBUG, DBG_CAL, fmt, ##arg) +#define tda_fail(ret) \ +({ \ + int __ret; \ + __ret = (ret < 0); \ + if (__ret) \ + tda_printk(KERN_ERR, "error %d on line %d\n", ret, __LINE__);\ + __ret; \ +}) + /*---------------------------------------------------------------------*/ enum tda18271_map_type { @@ -188,6 +203,8 @@ extern int tda18271_read_extended(struct dvb_frontend *fe); extern int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len); extern int tda18271_init_regs(struct dvb_frontend *fe); +extern int tda18271_charge_pump_source(struct dvb_frontend *fe, + enum tda18271_pll pll, int force); extern int tda18271_set_standby_mode(struct dvb_frontend *fe, int sm, int sm_lt, int sm_xt); diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/common/tuners/tda18271.h index 24b0e35a2ab..7db9831c0cb 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/common/tuners/tda18271.h @@ -26,7 +26,17 @@ struct tda18271_std_map_item { u16 if_freq; - u8 std_bits; + + /* EP3[4:3] */ + unsigned int agc_mode:2; + /* EP3[2:0] */ + unsigned int std:3; + /* EP4[7] */ + unsigned int fm_rfn:1; + /* EP4[4:2] */ + unsigned int if_lvl:3; + /* EB22[6:0] */ + unsigned int rfagc_top:7; }; struct tda18271_std_map { @@ -46,6 +56,11 @@ struct tda18271_std_map { struct tda18271_std_map_item qam_8; }; +enum tda18271_role { + TDA18271_MASTER = 0, + TDA18271_SLAVE, +}; + enum tda18271_i2c_gate { TDA18271_GATE_AUTO = 0, TDA18271_GATE_ANALOG, @@ -56,11 +71,17 @@ struct tda18271_config { /* override default if freq / std settings (optional) */ struct tda18271_std_map *std_map; + /* master / slave tuner: master uses main pll, slave uses cal pll */ + enum tda18271_role role; + /* use i2c gate provided by analog or digital demod */ enum tda18271_i2c_gate gate; + + /* some i2c providers cant write all 39 registers at once */ + unsigned int small_i2c:1; }; -#if defined(CONFIG_DVB_TDA18271) || (defined(CONFIG_DVB_TDA18271_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_TDA18271) || (defined(CONFIG_MEDIA_TUNER_TDA18271_MODULE) && defined(MODULE)) extern struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, struct i2c_adapter *i2c, struct tda18271_config *cfg); @@ -70,7 +91,7 @@ static inline struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct tda18271_config *cfg) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/tda827x.c b/drivers/media/common/tuners/tda827x.c index 229b11987a5..8555d9cf905 100644 --- a/drivers/media/dvb/frontends/tda827x.c +++ b/drivers/media/common/tuners/tda827x.c @@ -25,7 +25,7 @@ #include "tda827x.h" -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); @@ -142,7 +142,7 @@ static int tda827xo_set_params(struct dvb_frontend *fe, int i, tuner_freq, if_freq; u32 N; - dprintk("%s:\n", __FUNCTION__); + dprintk("%s:\n", __func__); switch (params->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: if_freq = 4000000; @@ -186,7 +186,7 @@ static int tda827xo_set_params(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(priv->i2c_adap, &msg, 1) != 1) { printk("%s: could not write to tuner at addr: 0x%02x\n", - __FUNCTION__, priv->i2c_addr << 1); + __func__, priv->i2c_addr << 1); return -EIO; } msleep(500); @@ -212,7 +212,7 @@ static int tda827xo_sleep(struct dvb_frontend *fe) struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, .buf = buf, .len = sizeof(buf) }; - dprintk("%s:\n", __FUNCTION__); + dprintk("%s:\n", __func__); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); i2c_transfer(priv->i2c_adap, &msg, 1); @@ -389,6 +389,79 @@ static struct tda827xa_data tda827xa_analog[] = { { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0} }; +static int tda827xa_sleep(struct dvb_frontend *fe) +{ + struct tda827x_priv *priv = fe->tuner_priv; + static u8 buf[] = { 0x30, 0x90 }; + struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, + .buf = buf, .len = sizeof(buf) }; + + dprintk("%s:\n", __func__); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + i2c_transfer(priv->i2c_adap, &msg, 1); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (priv->cfg && priv->cfg->sleep) + priv->cfg->sleep(fe); + + return 0; +} + +static void tda827xa_lna_gain(struct dvb_frontend *fe, int high, + struct analog_parameters *params) +{ + struct tda827x_priv *priv = fe->tuner_priv; + unsigned char buf[] = {0x22, 0x01}; + int arg; + int gp_func; + struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) }; + + if (NULL == priv->cfg) { + dprintk("tda827x_config not defined, cannot set LNA gain!\n"); + return; + } + msg.addr = priv->cfg->switch_addr; + if (priv->cfg->config) { + if (high) + dprintk("setting LNA to high gain\n"); + else + dprintk("setting LNA to low gain\n"); + } + switch (priv->cfg->config) { + case 0: /* no LNA */ + break; + case 1: /* switch is GPIO 0 of tda8290 */ + case 2: + if (params == NULL) { + gp_func = 0; + arg = 0; + } else { + /* turn Vsync on */ + gp_func = 1; + if (params->std & V4L2_STD_MN) + arg = 1; + else + arg = 0; + } + if (priv->cfg->tuner_callback) + priv->cfg->tuner_callback(priv->i2c_adap->algo_data, + gp_func, arg); + buf[1] = high ? 0 : 1; + if (priv->cfg->config == 2) + buf[1] = high ? 1 : 0; + i2c_transfer(priv->i2c_adap, &msg, 1); + break; + case 3: /* switch with GPIO of saa713x */ + if (priv->cfg->tuner_callback) + priv->cfg->tuner_callback(priv->i2c_adap->algo_data, 0, high); + break; + } +} + static int tda827xa_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { @@ -401,9 +474,9 @@ static int tda827xa_set_params(struct dvb_frontend *fe, int i, tuner_freq, if_freq; u32 N; - dprintk("%s:\n", __FUNCTION__); - if (priv->cfg && priv->cfg->lna_gain) - priv->cfg->lna_gain(fe, 1); + dprintk("%s:\n", __func__); + + tda827xa_lna_gain(fe, 1, NULL); msleep(20); switch (params->u.ofdm.bandwidth) { @@ -444,7 +517,7 @@ static int tda827xa_set_params(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(priv->i2c_adap, &msg, 1) != 1) { printk("%s: could not write to tuner at addr: 0x%02x\n", - __FUNCTION__, priv->i2c_addr << 1); + __func__, priv->i2c_addr << 1); return -EIO; } buf[0] = 0x90; @@ -474,8 +547,7 @@ static int tda827xa_set_params(struct dvb_frontend *fe, buf[1] >>= 4; dprintk("tda8275a AGC2 gain is: %d\n", buf[1]); if ((buf[1]) < 2) { - if (priv->cfg && priv->cfg->lna_gain) - priv->cfg->lna_gain(fe, 0); + tda827xa_lna_gain(fe, 0, NULL); buf[0] = 0x60; buf[1] = 0x0c; if (fe->ops.i2c_gate_ctrl) @@ -523,75 +595,6 @@ static int tda827xa_set_params(struct dvb_frontend *fe, return 0; } -static int tda827xa_sleep(struct dvb_frontend *fe) -{ - struct tda827x_priv *priv = fe->tuner_priv; - static u8 buf[] = { 0x30, 0x90 }; - struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, - .buf = buf, .len = sizeof(buf) }; - - dprintk("%s:\n", __FUNCTION__); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - - i2c_transfer(priv->i2c_adap, &msg, 1); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - - if (priv->cfg && priv->cfg->sleep) - priv->cfg->sleep(fe); - - return 0; -} - -/* ------------------------------------------------------------------ */ - -static void tda827xa_lna_gain(struct dvb_frontend *fe, int high, - struct analog_parameters *params) -{ - struct tda827x_priv *priv = fe->tuner_priv; - unsigned char buf[] = {0x22, 0x01}; - int arg; - struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, - .buf = buf, .len = sizeof(buf) }; - - if (NULL == priv->cfg) { - dprintk("tda827x_config not defined, cannot set LNA gain!\n"); - return; - } - - if (priv->cfg->config) { - if (high) - dprintk("setting LNA to high gain\n"); - else - dprintk("setting LNA to low gain\n"); - } - switch (*priv->cfg->config) { - case 0: /* no LNA */ - break; - case 1: /* switch is GPIO 0 of tda8290 */ - case 2: - /* turn Vsync on */ - if (params->std & V4L2_STD_MN) - arg = 1; - else - arg = 0; - if (priv->cfg->tuner_callback) - priv->cfg->tuner_callback(priv->i2c_adap->algo_data, - 1, arg); - buf[1] = high ? 0 : 1; - if (*priv->cfg->config == 2) - buf[1] = high ? 1 : 0; - i2c_transfer(priv->i2c_adap, &msg, 1); - break; - case 3: /* switch with GPIO of saa713x */ - if (priv->cfg->tuner_callback) - priv->cfg->tuner_callback(priv->i2c_adap->algo_data, - 0, high); - break; - } -} static int tda827xa_set_analog_params(struct dvb_frontend *fe, struct analog_parameters *params) @@ -726,7 +729,7 @@ static int tda827x_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) static int tda827x_init(struct dvb_frontend *fe) { struct tda827x_priv *priv = fe->tuner_priv; - dprintk("%s:\n", __FUNCTION__); + dprintk("%s:\n", __func__); if (priv->cfg && priv->cfg->init) priv->cfg->init(fe); @@ -794,7 +797,7 @@ static int tda827x_probe_version(struct dvb_frontend *fe) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(priv->i2c_adap, &msg, 1) != 1) { printk("%s: could not read from tuner at addr: 0x%02x\n", - __FUNCTION__, msg.addr << 1); + __func__, msg.addr << 1); return -EIO; } if ((data & 0x3c) == 0) { @@ -818,7 +821,7 @@ struct dvb_frontend *tda827x_attach(struct dvb_frontend *fe, int addr, { struct tda827x_priv *priv = NULL; - dprintk("%s:\n", __FUNCTION__); + dprintk("%s:\n", __func__); priv = kzalloc(sizeof(struct tda827x_priv), GFP_KERNEL); if (priv == NULL) return NULL; diff --git a/drivers/media/dvb/frontends/tda827x.h b/drivers/media/common/tuners/tda827x.h index 92eb65b4012..7850a9a1dc8 100644 --- a/drivers/media/dvb/frontends/tda827x.h +++ b/drivers/media/common/tuners/tda827x.h @@ -30,12 +30,12 @@ struct tda827x_config { /* saa7134 - provided callbacks */ - void (*lna_gain) (struct dvb_frontend *fe, int high); int (*init) (struct dvb_frontend *fe); int (*sleep) (struct dvb_frontend *fe); /* interface to tda829x driver */ - unsigned int *config; + unsigned int config; + int switch_addr; int (*tuner_callback) (void *dev, int command, int arg); void (*agcf)(struct dvb_frontend *fe); @@ -51,7 +51,7 @@ struct tda827x_config * @param cfg optional callback function pointers. * @return FE pointer on success, NULL on failure. */ -#if defined(CONFIG_DVB_TDA827X) || (defined(CONFIG_DVB_TDA827X_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_TDA827X) || (defined(CONFIG_MEDIA_TUNER_TDA827X_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda827x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, struct tda827x_config *cfg); @@ -61,9 +61,9 @@ static inline struct dvb_frontend* tda827x_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct tda827x_config *cfg) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_TDA827X +#endif // CONFIG_MEDIA_TUNER_TDA827X #endif // __DVB_TDA827X_H__ diff --git a/drivers/media/video/tda8290.c b/drivers/media/common/tuners/tda8290.c index 55bc89a6f06..91204d3f282 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -32,8 +32,6 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); -#define PREFIX "tda8290" - /* ---------------------------------------------------------------------- */ struct tda8290_priv { @@ -174,7 +172,7 @@ static void tda8290_set_params(struct dvb_frontend *fe, set_audio(fe, params); if (priv->cfg.config) - tuner_dbg("tda827xa config is 0x%02x\n", *priv->cfg.config); + tuner_dbg("tda827xa config is 0x%02x\n", priv->cfg.config); tuner_i2c_xfer_send(&priv->i2c_props, easy_mode, 2); tuner_i2c_xfer_send(&priv->i2c_props, agc_out_on, 2); tuner_i2c_xfer_send(&priv->i2c_props, soft_reset, 2); @@ -365,7 +363,7 @@ static void tda8295_set_params(struct dvb_frontend *fe, set_audio(fe, params); - tuner_dbg("%s: freq = %d\n", __FUNCTION__, params->frequency); + tuner_dbg("%s: freq = %d\n", __func__, params->frequency); tda8295_power(fe, 1); tda8295_agc1_out(fe, 1); @@ -444,8 +442,7 @@ static void tda8290_init_if(struct dvb_frontend *fe) unsigned char set_GP00_CF[] = { 0x20, 0x01 }; unsigned char set_GP01_CF[] = { 0x20, 0x0B }; - if ((priv->cfg.config) && - ((*priv->cfg.config == 1) || (*priv->cfg.config == 2))) + if ((priv->cfg.config == 1) || (priv->cfg.config == 2)) tuner_i2c_xfer_send(&priv->i2c_props, set_GP00_CF, 2); else tuner_i2c_xfer_send(&priv->i2c_props, set_GP01_CF, 2); @@ -581,17 +578,17 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) if ((data == 0x83) || (data == 0x84)) { priv->ver |= TDA18271; - tda18271_attach(fe, priv->tda827x_addr, - priv->i2c_props.adap, - &tda829x_tda18271_config); + dvb_attach(tda18271_attach, fe, priv->tda827x_addr, + priv->i2c_props.adap, &tda829x_tda18271_config); } else { if ((data & 0x3c) == 0) priv->ver |= TDA8275; else priv->ver |= TDA8275A; - tda827x_attach(fe, priv->tda827x_addr, - priv->i2c_props.adap, &priv->cfg); + dvb_attach(tda827x_attach, fe, priv->tda827x_addr, + priv->i2c_props.adap, &priv->cfg); + priv->cfg.switch_addr = priv->i2c_props.addr; } if (fe->ops.tuner_ops.init) fe->ops.tuner_ops.init(fe); @@ -616,7 +613,7 @@ static int tda8290_probe(struct tuner_i2c_props *i2c_props) if (tda8290_id[1] == TDA8290_ID) { if (debug) printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n", - __FUNCTION__, i2c_adapter_id(i2c_props->adap), + __func__, i2c_adapter_id(i2c_props->adap), i2c_props->addr); return 0; } @@ -636,7 +633,7 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) if (tda8295_id[1] == TDA8295_ID) { if (debug) printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n", - __FUNCTION__, i2c_adapter_id(i2c_props->adap), + __func__, i2c_adapter_id(i2c_props->adap), i2c_props->addr); return 0; } @@ -674,6 +671,7 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; + priv->i2c_props.name = "tda829x"; if (cfg) { priv->cfg.config = cfg->lna_cfg; priv->cfg.tuner_callback = cfg->tuner_callback; diff --git a/drivers/media/video/tda8290.h b/drivers/media/common/tuners/tda8290.h index dc8ef310b7b..aa074f3f0c0 100644 --- a/drivers/media/video/tda8290.h +++ b/drivers/media/common/tuners/tda8290.h @@ -21,7 +21,7 @@ #include "dvb_frontend.h" struct tda829x_config { - unsigned int *lna_cfg; + unsigned int lna_cfg; int (*tuner_callback) (void *dev, int command, int arg); unsigned int probe_tuner:1; @@ -29,7 +29,7 @@ struct tda829x_config { #define TDA829X_DONT_PROBE 1 }; -#if defined(CONFIG_TUNER_TDA8290) || (defined(CONFIG_TUNER_TDA8290_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_TDA8290) || (defined(CONFIG_MEDIA_TUNER_TDA8290_MODULE) && defined(MODULE)) extern int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr); extern struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, @@ -39,7 +39,7 @@ extern struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, #else static inline int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -EINVAL; } @@ -49,7 +49,7 @@ static inline struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, struct tda829x_config *cfg) { printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", - __FUNCTION__); + __func__); return NULL; } #endif diff --git a/drivers/media/video/tda9887.c b/drivers/media/common/tuners/tda9887.c index 106c93b8203..a0545ba957b 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/common/tuners/tda9887.c @@ -25,10 +25,12 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); -#define PREFIX "tda9887" +static DEFINE_MUTEX(tda9887_list_mutex); +static LIST_HEAD(hybrid_tuner_instance_list); struct tda9887_priv { struct tuner_i2c_props i2c_props; + struct list_head hybrid_tuner_instance_list; unsigned char data[4]; unsigned int config; @@ -644,7 +646,15 @@ static int tda9887_set_config(struct dvb_frontend *fe, void *priv_cfg) static void tda9887_release(struct dvb_frontend *fe) { - kfree(fe->analog_demod_priv); + struct tda9887_priv *priv = fe->analog_demod_priv; + + mutex_lock(&tda9887_list_mutex); + + if (priv) + hybrid_tuner_release_state(priv); + + mutex_unlock(&tda9887_list_mutex); + fe->analog_demod_priv = NULL; } @@ -665,17 +675,29 @@ struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, u8 i2c_addr) { struct tda9887_priv *priv = NULL; + int instance; - priv = kzalloc(sizeof(struct tda9887_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; - fe->analog_demod_priv = priv; + mutex_lock(&tda9887_list_mutex); - priv->i2c_props.addr = i2c_addr; - priv->i2c_props.adap = i2c_adap; - priv->mode = T_STANDBY; + instance = hybrid_tuner_request_state(struct tda9887_priv, priv, + hybrid_tuner_instance_list, + i2c_adap, i2c_addr, "tda9887"); + switch (instance) { + case 0: + mutex_unlock(&tda9887_list_mutex); + return NULL; + break; + case 1: + fe->analog_demod_priv = priv; + priv->mode = T_STANDBY; + tuner_info("tda988[5/6/7] found\n"); + break; + default: + fe->analog_demod_priv = priv; + break; + } - tuner_info("tda988[5/6/7] found\n"); + mutex_unlock(&tda9887_list_mutex); memcpy(&fe->ops.analog_ops, &tda9887_ops, sizeof(struct analog_demod_ops)); diff --git a/drivers/media/video/tda9887.h b/drivers/media/common/tuners/tda9887.h index 8f873a8e6ed..acc419e8c4f 100644 --- a/drivers/media/video/tda9887.h +++ b/drivers/media/common/tuners/tda9887.h @@ -21,7 +21,7 @@ #include "dvb_frontend.h" /* ------------------------------------------------------------------------ */ -#if defined(CONFIG_TUNER_TDA9887) || (defined(CONFIG_TUNER_TDA9887_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_TDA9887) || (defined(CONFIG_MEDIA_TUNER_TDA9887_MODULE) && defined(MODULE)) extern struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c_adap, u8 i2c_addr); @@ -30,7 +30,7 @@ static inline struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c_adap, u8 i2c_addr) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/video/tea5761.c b/drivers/media/common/tuners/tea5761.c index 5326eeceaac..b23dadeecd0 100644 --- a/drivers/media/video/tea5761.c +++ b/drivers/media/common/tuners/tea5761.c @@ -14,12 +14,10 @@ #include "tuner-i2c.h" #include "tea5761.h" -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); -#define PREFIX "tea5761" - struct tea5761_priv { struct tuner_i2c_props i2c_props; @@ -131,7 +129,7 @@ static void tea5761_status_dump(unsigned char *buffer) frq = 1000 * (div * 32768 / 1000 + FREQ_OFFSET + 225) / 4; /* Freq in KHz */ - printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n", + printk(KERN_INFO "tea5761: Frequency %d.%03d KHz (divider = 0x%04x)\n", frq / 1000, frq % 1000, div); } @@ -249,14 +247,19 @@ int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) if (16 != (rc = tuner_i2c_xfer_recv(&i2c, buffer, 16))) { printk(KERN_WARNING "it is not a TEA5761. Received %i chars.\n", rc); - return EINVAL; + return -EINVAL; } - if (!((buffer[13] != 0x2b) || (buffer[14] != 0x57) || (buffer[15] != 0x061))) { - printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x. It is not a TEA5761\n",buffer[13],buffer[14],buffer[15]); - return EINVAL; + if ((buffer[13] != 0x2b) || (buffer[14] != 0x57) || (buffer[15] != 0x061)) { + printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x." + " It is not a TEA5761\n", + buffer[13], buffer[14], buffer[15]); + return -EINVAL; } - printk(KERN_WARNING "TEA5761 detected.\n"); + printk(KERN_WARNING "tea5761: TEA%02x%02x detected. " + "Manufacturer ID= 0x%02x\n", + buffer[14], buffer[15], buffer[13]); + return 0; } @@ -292,7 +295,7 @@ struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, { struct tea5761_priv *priv = NULL; - if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL) + if (tea5761_autodetection(i2c_adap, i2c_addr) != 0) return NULL; priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL); @@ -302,6 +305,7 @@ struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; + priv->i2c_props.name = "tea5761"; memcpy(&fe->ops.tuner_ops, &tea5761_tuner_ops, sizeof(struct dvb_tuner_ops)); diff --git a/drivers/media/video/tea5761.h b/drivers/media/common/tuners/tea5761.h index 73a03b42784..2e2ff82c95a 100644 --- a/drivers/media/video/tea5761.h +++ b/drivers/media/common/tuners/tea5761.h @@ -20,7 +20,7 @@ #include <linux/i2c.h> #include "dvb_frontend.h" -#if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_TEA5761) || (defined(CONFIG_MEDIA_TUNER_TEA5761_MODULE) && defined(MODULE)) extern int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr); extern struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, @@ -31,7 +31,7 @@ static inline int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) { printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", - __FUNCTION__); + __func__); return -EINVAL; } @@ -39,7 +39,7 @@ static inline struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, struct i2c_adapter* i2c_adap, u8 i2c_addr) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/video/tea5767.c b/drivers/media/common/tuners/tea5767.c index e1b48d87e7b..1f5646334a8 100644 --- a/drivers/media/video/tea5767.c +++ b/drivers/media/common/tuners/tea5767.c @@ -16,12 +16,10 @@ #include "tuner-i2c.h" #include "tea5767.h" -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); -#define PREFIX "tea5767" - /*****************************************************************************/ struct tea5767_priv { @@ -137,14 +135,14 @@ static void tea5767_status_dump(struct tea5767_priv *priv, unsigned int div, frq; if (TEA5767_READY_FLAG_MASK & buffer[0]) - printk(PREFIX "Ready Flag ON\n"); + tuner_info("Ready Flag ON\n"); else - printk(PREFIX "Ready Flag OFF\n"); + tuner_info("Ready Flag OFF\n"); if (TEA5767_BAND_LIMIT_MASK & buffer[0]) - printk(PREFIX "Tuner at band limit\n"); + tuner_info("Tuner at band limit\n"); else - printk(PREFIX "Tuner not at band limit\n"); + tuner_info("Tuner not at band limit\n"); div = ((buffer[0] & 0x3f) << 8) | buffer[1]; @@ -166,23 +164,23 @@ static void tea5767_status_dump(struct tea5767_priv *priv, buffer[0] = (div >> 8) & 0x3f; buffer[1] = div & 0xff; - printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n", - frq / 1000, frq % 1000, div); + tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n", + frq / 1000, frq % 1000, div); if (TEA5767_STEREO_MASK & buffer[2]) - printk(PREFIX "Stereo\n"); + tuner_info("Stereo\n"); else - printk(PREFIX "Mono\n"); + tuner_info("Mono\n"); - printk(PREFIX "IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK); + tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK); - printk(PREFIX "ADC Level = %d\n", - (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4); + tuner_info("ADC Level = %d\n", + (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4); - printk(PREFIX "Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK)); + tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK)); - printk(PREFIX "Reserved = 0x%02x\n", - (buffer[4] & TEA5767_RESERVED_MASK)); + tuner_info("Reserved = 0x%02x\n", + (buffer[4] & TEA5767_RESERVED_MASK)); } /* Freq should be specifyed at 62.5 Hz */ @@ -375,14 +373,14 @@ int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) { printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc); - return EINVAL; + return -EINVAL; } /* If all bytes are the same then it's a TV tuner and not a tea5767 */ if (buffer[0] == buffer[1] && buffer[0] == buffer[2] && buffer[0] == buffer[3] && buffer[0] == buffer[4]) { printk(KERN_WARNING "All bytes are equal. It is not a TEA5767\n"); - return EINVAL; + return -EINVAL; } /* Status bytes: @@ -392,14 +390,9 @@ int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) */ if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) { printk(KERN_WARNING "Chip ID is not zero. It is not a TEA5767\n"); - return EINVAL; + return -EINVAL; } - /* It seems that tea5767 returns 0xff after the 5th byte */ - if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) { - printk(KERN_WARNING "Returned more than 5 bytes. It is not a TEA5767\n"); - return EINVAL; - } return 0; } @@ -456,6 +449,8 @@ struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; + priv->i2c_props.name = "tea5767"; + priv->ctrl.xtal_freq = TEA5767_HIGH_LO_32768; priv->ctrl.port1 = 1; priv->ctrl.port2 = 1; diff --git a/drivers/media/video/tea5767.h b/drivers/media/common/tuners/tea5767.h index a44451f6114..d30ab1b483d 100644 --- a/drivers/media/video/tea5767.h +++ b/drivers/media/common/tuners/tea5767.h @@ -39,7 +39,7 @@ struct tea5767_ctrl { enum tea5767_xtal xtal_freq; }; -#if defined(CONFIG_TUNER_TEA5767) || (defined(CONFIG_TUNER_TEA5767_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_TEA5767) || (defined(CONFIG_MEDIA_TUNER_TEA5767_MODULE) && defined(MODULE)) extern int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr); extern struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe, @@ -50,7 +50,7 @@ static inline int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) { printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", - __FUNCTION__); + __func__); return -EINVAL; } @@ -58,7 +58,7 @@ static inline struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe, struct i2c_adapter* i2c_adap, u8 i2c_addr) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h new file mode 100644 index 00000000000..cb1c7141f0c --- /dev/null +++ b/drivers/media/common/tuners/tuner-i2c.h @@ -0,0 +1,181 @@ +/* + tuner-i2c.h - i2c interface for different tuners + + Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __TUNER_I2C_H__ +#define __TUNER_I2C_H__ + +#include <linux/i2c.h> + +struct tuner_i2c_props { + u8 addr; + struct i2c_adapter *adap; + + /* used for tuner instance management */ + int count; + char *name; +}; + +static inline int tuner_i2c_xfer_send(struct tuner_i2c_props *props, char *buf, int len) +{ + struct i2c_msg msg = { .addr = props->addr, .flags = 0, + .buf = buf, .len = len }; + int ret = i2c_transfer(props->adap, &msg, 1); + + return (ret == 1) ? len : ret; +} + +static inline int tuner_i2c_xfer_recv(struct tuner_i2c_props *props, char *buf, int len) +{ + struct i2c_msg msg = { .addr = props->addr, .flags = I2C_M_RD, + .buf = buf, .len = len }; + int ret = i2c_transfer(props->adap, &msg, 1); + + return (ret == 1) ? len : ret; +} + +static inline int tuner_i2c_xfer_send_recv(struct tuner_i2c_props *props, + char *obuf, int olen, + char *ibuf, int ilen) +{ + struct i2c_msg msg[2] = { { .addr = props->addr, .flags = 0, + .buf = obuf, .len = olen }, + { .addr = props->addr, .flags = I2C_M_RD, + .buf = ibuf, .len = ilen } }; + int ret = i2c_transfer(props->adap, msg, 2); + + return (ret == 2) ? ilen : ret; +} + +/* Callers must declare as a global for the module: + * + * static LIST_HEAD(hybrid_tuner_instance_list); + * + * hybrid_tuner_instance_list should be the third argument + * passed into hybrid_tuner_request_state(). + * + * state structure must contain the following: + * + * struct list_head hybrid_tuner_instance_list; + * struct tuner_i2c_props i2c_props; + * + * hybrid_tuner_instance_list (both within state structure and globally) + * is only required if the driver is using hybrid_tuner_request_state + * and hybrid_tuner_release_state to manage state sharing between + * multiple instances of hybrid tuners. + */ + +#define tuner_printk(kernlvl, i2cprops, fmt, arg...) do { \ + printk(kernlvl "%s %d-%04x: " fmt, i2cprops.name, \ + i2cprops.adap ? \ + i2c_adapter_id(i2cprops.adap) : -1, \ + i2cprops.addr, ##arg); \ + } while (0) + +/* TO DO: convert all callers of these macros to pass in + * struct tuner_i2c_props, then remove the macro wrappers */ + +#define __tuner_warn(i2cprops, fmt, arg...) do { \ + tuner_printk(KERN_WARNING, i2cprops, fmt, ##arg); \ + } while (0) + +#define __tuner_info(i2cprops, fmt, arg...) do { \ + tuner_printk(KERN_INFO, i2cprops, fmt, ##arg); \ + } while (0) + +#define __tuner_err(i2cprops, fmt, arg...) do { \ + tuner_printk(KERN_ERR, i2cprops, fmt, ##arg); \ + } while (0) + +#define __tuner_dbg(i2cprops, fmt, arg...) do { \ + if ((debug)) \ + tuner_printk(KERN_DEBUG, i2cprops, fmt, ##arg); \ + } while (0) + +#define tuner_warn(fmt, arg...) __tuner_warn(priv->i2c_props, fmt, ##arg) +#define tuner_info(fmt, arg...) __tuner_info(priv->i2c_props, fmt, ##arg) +#define tuner_err(fmt, arg...) __tuner_err(priv->i2c_props, fmt, ##arg) +#define tuner_dbg(fmt, arg...) __tuner_dbg(priv->i2c_props, fmt, ##arg) + +/****************************************************************************/ + +/* The return value of hybrid_tuner_request_state indicates the number of + * instances using this tuner object. + * + * 0 - no instances, indicates an error - kzalloc must have failed + * + * 1 - one instance, indicates that the tuner object was created successfully + * + * 2 (or more) instances, indicates that an existing tuner object was found + */ + +#define hybrid_tuner_request_state(type, state, list, i2cadap, i2caddr, devname)\ +({ \ + int __ret = 0; \ + list_for_each_entry(state, &list, hybrid_tuner_instance_list) { \ + if (((i2cadap) && (state->i2c_props.adap)) && \ + ((i2c_adapter_id(state->i2c_props.adap) == \ + i2c_adapter_id(i2cadap)) && \ + (i2caddr == state->i2c_props.addr))) { \ + __tuner_info(state->i2c_props, \ + "attaching existing instance\n"); \ + state->i2c_props.count++; \ + __ret = state->i2c_props.count; \ + break; \ + } \ + } \ + if (0 == __ret) { \ + state = kzalloc(sizeof(type), GFP_KERNEL); \ + if (NULL == state) \ + goto __fail; \ + state->i2c_props.addr = i2caddr; \ + state->i2c_props.adap = i2cadap; \ + state->i2c_props.name = devname; \ + __tuner_info(state->i2c_props, \ + "creating new instance\n"); \ + list_add_tail(&state->hybrid_tuner_instance_list, &list);\ + state->i2c_props.count++; \ + __ret = state->i2c_props.count; \ + } \ +__fail: \ + __ret; \ +}) + +#define hybrid_tuner_release_state(state) \ +({ \ + int __ret; \ + state->i2c_props.count--; \ + __ret = state->i2c_props.count; \ + if (!state->i2c_props.count) { \ + __tuner_info(state->i2c_props, "destroying instance\n");\ + list_del(&state->hybrid_tuner_instance_list); \ + kfree(state); \ + } \ + __ret; \ +}) + +#define hybrid_tuner_report_instance_count(state) \ +({ \ + int __ret = 0; \ + if (state) \ + __ret = state->i2c_props.count; \ + __ret; \ +}) + +#endif /* __TUNER_I2C_H__ */ diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c new file mode 100644 index 00000000000..266c255cf0d --- /dev/null +++ b/drivers/media/common/tuners/tuner-simple.c @@ -0,0 +1,1095 @@ +/* + * i2c tv tuner chip device driver + * controls all those simple 4-control-bytes style tuners. + * + * This "tuner-simple" module was split apart from the original "tuner" module. + */ +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/videodev.h> +#include <media/tuner.h> +#include <media/v4l2-common.h> +#include <media/tuner-types.h> +#include "tuner-i2c.h" +#include "tuner-simple.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable verbose debug messages"); + +#define TUNER_SIMPLE_MAX 64 +static unsigned int simple_devcount; + +static int offset; +module_param(offset, int, 0664); +MODULE_PARM_DESC(offset, "Allows to specify an offset for tuner"); + +static unsigned int atv_input[TUNER_SIMPLE_MAX] = \ + { [0 ... (TUNER_SIMPLE_MAX-1)] = 0 }; +static unsigned int dtv_input[TUNER_SIMPLE_MAX] = \ + { [0 ... (TUNER_SIMPLE_MAX-1)] = 0 }; +module_param_array(atv_input, int, NULL, 0644); +module_param_array(dtv_input, int, NULL, 0644); +MODULE_PARM_DESC(atv_input, "specify atv rf input, 0 for autoselect"); +MODULE_PARM_DESC(dtv_input, "specify dtv rf input, 0 for autoselect"); + +/* ---------------------------------------------------------------------- */ + +/* tv standard selection for Temic 4046 FM5 + this value takes the low bits of control byte 2 + from datasheet Rev.01, Feb.00 + standard BG I L L2 D + picture IF 38.9 38.9 38.9 33.95 38.9 + sound 1 33.4 32.9 32.4 40.45 32.4 + sound 2 33.16 + NICAM 33.05 32.348 33.05 33.05 + */ +#define TEMIC_SET_PAL_I 0x05 +#define TEMIC_SET_PAL_DK 0x09 +#define TEMIC_SET_PAL_L 0x0a /* SECAM ? */ +#define TEMIC_SET_PAL_L2 0x0b /* change IF ! */ +#define TEMIC_SET_PAL_BG 0x0c + +/* tv tuner system standard selection for Philips FQ1216ME + this value takes the low bits of control byte 2 + from datasheet "1999 Nov 16" (supersedes "1999 Mar 23") + standard BG DK I L L` + picture carrier 38.90 38.90 38.90 38.90 33.95 + colour 34.47 34.47 34.47 34.47 38.38 + sound 1 33.40 32.40 32.90 32.40 40.45 + sound 2 33.16 - - - - + NICAM 33.05 33.05 32.35 33.05 39.80 + */ +#define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/ +#define PHILIPS_SET_PAL_BGDK 0x09 +#define PHILIPS_SET_PAL_L2 0x0a +#define PHILIPS_SET_PAL_L 0x0b + +/* system switching for Philips FI1216MF MK2 + from datasheet "1996 Jul 09", + standard BG L L' + picture carrier 38.90 38.90 33.95 + colour 34.47 34.37 38.38 + sound 1 33.40 32.40 40.45 + sound 2 33.16 - - + NICAM 33.05 33.05 39.80 + */ +#define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */ +#define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */ +#define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */ + +/* Control byte */ + +#define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */ +#define TUNER_RATIO_SELECT_50 0x00 +#define TUNER_RATIO_SELECT_32 0x02 +#define TUNER_RATIO_SELECT_166 0x04 +#define TUNER_RATIO_SELECT_62 0x06 + +#define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */ + +/* Status byte */ + +#define TUNER_POR 0x80 +#define TUNER_FL 0x40 +#define TUNER_MODE 0x38 +#define TUNER_AFC 0x07 +#define TUNER_SIGNAL 0x07 +#define TUNER_STEREO 0x10 + +#define TUNER_PLL_LOCKED 0x40 +#define TUNER_STEREO_MK3 0x04 + +static DEFINE_MUTEX(tuner_simple_list_mutex); +static LIST_HEAD(hybrid_tuner_instance_list); + +struct tuner_simple_priv { + unsigned int nr; + u16 last_div; + + struct tuner_i2c_props i2c_props; + struct list_head hybrid_tuner_instance_list; + + unsigned int type; + struct tunertype *tun; + + u32 frequency; + u32 bandwidth; +}; + +/* ---------------------------------------------------------------------- */ + +static int tuner_read_status(struct dvb_frontend *fe) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + unsigned char byte; + + if (1 != tuner_i2c_xfer_recv(&priv->i2c_props, &byte, 1)) + return 0; + + return byte; +} + +static inline int tuner_signal(const int status) +{ + return (status & TUNER_SIGNAL) << 13; +} + +static inline int tuner_stereo(const int type, const int status) +{ + switch (type) { + case TUNER_PHILIPS_FM1216ME_MK3: + case TUNER_PHILIPS_FM1236_MK3: + case TUNER_PHILIPS_FM1256_IH3: + case TUNER_LG_NTSC_TAPE: + return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); + default: + return status & TUNER_STEREO; + } +} + +static inline int tuner_islocked(const int status) +{ + return (status & TUNER_FL); +} + +static inline int tuner_afcstatus(const int status) +{ + return (status & TUNER_AFC) - 2; +} + + +static int simple_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + int tuner_status; + + if (priv->i2c_props.adap == NULL) + return -EINVAL; + + tuner_status = tuner_read_status(fe); + + *status = 0; + + if (tuner_islocked(tuner_status)) + *status = TUNER_STATUS_LOCKED; + if (tuner_stereo(priv->type, tuner_status)) + *status |= TUNER_STATUS_STEREO; + + tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status)); + + return 0; +} + +static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + int signal; + + if (priv->i2c_props.adap == NULL) + return -EINVAL; + + signal = tuner_signal(tuner_read_status(fe)); + + *strength = signal; + + tuner_dbg("Signal strength: %d\n", signal); + + return 0; +} + +/* ---------------------------------------------------------------------- */ + +static inline char *tuner_param_name(enum param_type type) +{ + char *name; + + switch (type) { + case TUNER_PARAM_TYPE_RADIO: + name = "radio"; + break; + case TUNER_PARAM_TYPE_PAL: + name = "pal"; + break; + case TUNER_PARAM_TYPE_SECAM: + name = "secam"; + break; + case TUNER_PARAM_TYPE_NTSC: + name = "ntsc"; + break; + case TUNER_PARAM_TYPE_DIGITAL: + name = "digital"; + break; + default: + name = "unknown"; + break; + } + return name; +} + +static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe, + enum param_type desired_type) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + struct tunertype *tun = priv->tun; + int i; + + for (i = 0; i < tun->count; i++) + if (desired_type == tun->params[i].type) + break; + + /* use default tuner params if desired_type not available */ + if (i == tun->count) { + tuner_dbg("desired params (%s) undefined for tuner %d\n", + tuner_param_name(desired_type), priv->type); + i = 0; + } + + tuner_dbg("using tuner params #%d (%s)\n", i, + tuner_param_name(tun->params[i].type)); + + return &tun->params[i]; +} + +static int simple_config_lookup(struct dvb_frontend *fe, + struct tuner_params *t_params, + int *frequency, u8 *config, u8 *cb) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + int i; + + for (i = 0; i < t_params->count; i++) { + if (*frequency > t_params->ranges[i].limit) + continue; + break; + } + if (i == t_params->count) { + tuner_dbg("frequency out of range (%d > %d)\n", + *frequency, t_params->ranges[i - 1].limit); + *frequency = t_params->ranges[--i].limit; + } + *config = t_params->ranges[i].config; + *cb = t_params->ranges[i].cb; + + tuner_dbg("freq = %d.%02d (%d), range = %d, " + "config = 0x%02x, cb = 0x%02x\n", + *frequency / 16, *frequency % 16 * 100 / 16, *frequency, + i, *config, *cb); + + return i; +} + +/* ---------------------------------------------------------------------- */ + +static void simple_set_rf_input(struct dvb_frontend *fe, + u8 *config, u8 *cb, unsigned int rf) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + + switch (priv->type) { + case TUNER_PHILIPS_TUV1236D: + switch (rf) { + case 1: + *cb |= 0x08; + break; + default: + *cb &= ~0x08; + break; + } + break; + case TUNER_PHILIPS_FCV1236D: + switch (rf) { + case 1: + *cb |= 0x01; + break; + default: + *cb &= ~0x01; + break; + } + break; + default: + break; + } +} + +static int simple_std_setup(struct dvb_frontend *fe, + struct analog_parameters *params, + u8 *config, u8 *cb) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + u8 tuneraddr; + int rc; + + /* tv norm specific stuff for multi-norm tuners */ + switch (priv->type) { + case TUNER_PHILIPS_SECAM: /* FI1216MF */ + /* 0x01 -> ??? no change ??? */ + /* 0x02 -> PAL BDGHI / SECAM L */ + /* 0x04 -> ??? PAL others / SECAM others ??? */ + *cb &= ~0x03; + if (params->std & V4L2_STD_SECAM_L) + /* also valid for V4L2_STD_SECAM */ + *cb |= PHILIPS_MF_SET_STD_L; + else if (params->std & V4L2_STD_SECAM_LC) + *cb |= PHILIPS_MF_SET_STD_LC; + else /* V4L2_STD_B|V4L2_STD_GH */ + *cb |= PHILIPS_MF_SET_STD_BG; + break; + + case TUNER_TEMIC_4046FM5: + *cb &= ~0x0f; + + if (params->std & V4L2_STD_PAL_BG) { + *cb |= TEMIC_SET_PAL_BG; + + } else if (params->std & V4L2_STD_PAL_I) { + *cb |= TEMIC_SET_PAL_I; + + } else if (params->std & V4L2_STD_PAL_DK) { + *cb |= TEMIC_SET_PAL_DK; + + } else if (params->std & V4L2_STD_SECAM_L) { + *cb |= TEMIC_SET_PAL_L; + + } + break; + + case TUNER_PHILIPS_FQ1216ME: + *cb &= ~0x0f; + + if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { + *cb |= PHILIPS_SET_PAL_BGDK; + + } else if (params->std & V4L2_STD_PAL_I) { + *cb |= PHILIPS_SET_PAL_I; + + } else if (params->std & V4L2_STD_SECAM_L) { + *cb |= PHILIPS_SET_PAL_L; + + } + break; + + case TUNER_PHILIPS_FCV1236D: + /* 0x00 -> ATSC antenna input 1 */ + /* 0x01 -> ATSC antenna input 2 */ + /* 0x02 -> NTSC antenna input 1 */ + /* 0x03 -> NTSC antenna input 2 */ + *cb &= ~0x03; + if (!(params->std & V4L2_STD_ATSC)) + *cb |= 2; + break; + + case TUNER_MICROTUNE_4042FI5: + /* Set the charge pump for fast tuning */ + *config |= TUNER_CHARGE_PUMP; + break; + + case TUNER_PHILIPS_TUV1236D: + { + /* 0x40 -> ATSC antenna input 1 */ + /* 0x48 -> ATSC antenna input 2 */ + /* 0x00 -> NTSC antenna input 1 */ + /* 0x08 -> NTSC antenna input 2 */ + u8 buffer[4] = { 0x14, 0x00, 0x17, 0x00}; + *cb &= ~0x40; + if (params->std & V4L2_STD_ATSC) { + *cb |= 0x40; + buffer[1] = 0x04; + } + /* set to the correct mode (analog or digital) */ + tuneraddr = priv->i2c_props.addr; + priv->i2c_props.addr = 0x0a; + rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2); + if (2 != rc) + tuner_warn("i2c i/o error: rc == %d " + "(should be 2)\n", rc); + rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2); + if (2 != rc) + tuner_warn("i2c i/o error: rc == %d " + "(should be 2)\n", rc); + priv->i2c_props.addr = tuneraddr; + break; + } + } + if (atv_input[priv->nr]) + simple_set_rf_input(fe, config, cb, atv_input[priv->nr]); + + return 0; +} + +static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer, + u16 div, u8 config, u8 cb) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + int rc; + + switch (priv->type) { + case TUNER_LG_TDVS_H06XF: + /* Set the Auxiliary Byte. */ + buffer[0] = buffer[2]; + buffer[0] &= ~0x20; + buffer[0] |= 0x18; + buffer[1] = 0x20; + tuner_dbg("tv 0x%02x 0x%02x\n", buffer[0], buffer[1]); + + rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2); + if (2 != rc) + tuner_warn("i2c i/o error: rc == %d " + "(should be 2)\n", rc); + break; + case TUNER_MICROTUNE_4042FI5: + { + /* FIXME - this may also work for other tuners */ + unsigned long timeout = jiffies + msecs_to_jiffies(1); + u8 status_byte = 0; + + /* Wait until the PLL locks */ + for (;;) { + if (time_after(jiffies, timeout)) + return 0; + rc = tuner_i2c_xfer_recv(&priv->i2c_props, + &status_byte, 1); + if (1 != rc) { + tuner_warn("i2c i/o read error: rc == %d " + "(should be 1)\n", rc); + break; + } + if (status_byte & TUNER_PLL_LOCKED) + break; + udelay(10); + } + + /* Set the charge pump for optimized phase noise figure */ + config &= ~TUNER_CHARGE_PUMP; + buffer[0] = (div>>8) & 0x7f; + buffer[1] = div & 0xff; + buffer[2] = config; + buffer[3] = cb; + tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", + buffer[0], buffer[1], buffer[2], buffer[3]); + + rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); + if (4 != rc) + tuner_warn("i2c i/o error: rc == %d " + "(should be 4)\n", rc); + break; + } + } + + return 0; +} + +static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + + switch (priv->type) { + case TUNER_TENA_9533_DI: + case TUNER_YMEC_TVF_5533MF: + tuner_dbg("This tuner doesn't have FM. " + "Most cards have a TEA5767 for FM\n"); + return 0; + case TUNER_PHILIPS_FM1216ME_MK3: + case TUNER_PHILIPS_FM1236_MK3: + case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_LG_NTSC_TAPE: + case TUNER_PHILIPS_FM1256_IH3: + buffer[3] = 0x19; + break; + case TUNER_TNF_5335MF: + buffer[3] = 0x11; + break; + case TUNER_LG_PAL_FM: + buffer[3] = 0xa5; + break; + case TUNER_THOMSON_DTT761X: + buffer[3] = 0x39; + break; + case TUNER_MICROTUNE_4049FM5: + default: + buffer[3] = 0xa4; + break; + } + + return 0; +} + +/* ---------------------------------------------------------------------- */ + +static int simple_set_tv_freq(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + u8 config, cb; + u16 div; + struct tunertype *tun; + u8 buffer[4]; + int rc, IFPCoff, i; + enum param_type desired_type; + struct tuner_params *t_params; + + tun = priv->tun; + + /* IFPCoff = Video Intermediate Frequency - Vif: + 940 =16*58.75 NTSC/J (Japan) + 732 =16*45.75 M/N STD + 704 =16*44 ATSC (at DVB code) + 632 =16*39.50 I U.K. + 622.4=16*38.90 B/G D/K I, L STD + 592 =16*37.00 D China + 590 =16.36.875 B Australia + 543.2=16*33.95 L' STD + 171.2=16*10.70 FM Radio (at set_radio_freq) + */ + + if (params->std == V4L2_STD_NTSC_M_JP) { + IFPCoff = 940; + desired_type = TUNER_PARAM_TYPE_NTSC; + } else if ((params->std & V4L2_STD_MN) && + !(params->std & ~V4L2_STD_MN)) { + IFPCoff = 732; + desired_type = TUNER_PARAM_TYPE_NTSC; + } else if (params->std == V4L2_STD_SECAM_LC) { + IFPCoff = 543; + desired_type = TUNER_PARAM_TYPE_SECAM; + } else { + IFPCoff = 623; + desired_type = TUNER_PARAM_TYPE_PAL; + } + + t_params = simple_tuner_params(fe, desired_type); + + i = simple_config_lookup(fe, t_params, ¶ms->frequency, + &config, &cb); + + div = params->frequency + IFPCoff + offset; + + tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, " + "Offset=%d.%02d MHz, div=%0d\n", + params->frequency / 16, params->frequency % 16 * 100 / 16, + IFPCoff / 16, IFPCoff % 16 * 100 / 16, + offset / 16, offset % 16 * 100 / 16, div); + + /* tv norm specific stuff for multi-norm tuners */ + simple_std_setup(fe, params, &config, &cb); + + if (t_params->cb_first_if_lower_freq && div < priv->last_div) { + buffer[0] = config; + buffer[1] = cb; + buffer[2] = (div>>8) & 0x7f; + buffer[3] = div & 0xff; + } else { + buffer[0] = (div>>8) & 0x7f; + buffer[1] = div & 0xff; + buffer[2] = config; + buffer[3] = cb; + } + priv->last_div = div; + if (t_params->has_tda9887) { + struct v4l2_priv_tun_config tda9887_cfg; + int config = 0; + int is_secam_l = (params->std & (V4L2_STD_SECAM_L | + V4L2_STD_SECAM_LC)) && + !(params->std & ~(V4L2_STD_SECAM_L | + V4L2_STD_SECAM_LC)); + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &config; + + if (params->std == V4L2_STD_SECAM_LC) { + if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc) + config |= TDA9887_PORT1_ACTIVE; + if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc) + config |= TDA9887_PORT2_ACTIVE; + } else { + if (t_params->port1_active) + config |= TDA9887_PORT1_ACTIVE; + if (t_params->port2_active) + config |= TDA9887_PORT2_ACTIVE; + } + if (t_params->intercarrier_mode) + config |= TDA9887_INTERCARRIER; + if (is_secam_l) { + if (i == 0 && t_params->default_top_secam_low) + config |= TDA9887_TOP(t_params->default_top_secam_low); + else if (i == 1 && t_params->default_top_secam_mid) + config |= TDA9887_TOP(t_params->default_top_secam_mid); + else if (t_params->default_top_secam_high) + config |= TDA9887_TOP(t_params->default_top_secam_high); + } else { + if (i == 0 && t_params->default_top_low) + config |= TDA9887_TOP(t_params->default_top_low); + else if (i == 1 && t_params->default_top_mid) + config |= TDA9887_TOP(t_params->default_top_mid); + else if (t_params->default_top_high) + config |= TDA9887_TOP(t_params->default_top_high); + } + if (t_params->default_pll_gating_18) + config |= TDA9887_GATING_18; + i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, + &tda9887_cfg); + } + tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", + buffer[0], buffer[1], buffer[2], buffer[3]); + + rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); + if (4 != rc) + tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc); + + simple_post_tune(fe, &buffer[0], div, config, cb); + + return 0; +} + +static int simple_set_radio_freq(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct tunertype *tun; + struct tuner_simple_priv *priv = fe->tuner_priv; + u8 buffer[4]; + u16 div; + int rc, j; + struct tuner_params *t_params; + unsigned int freq = params->frequency; + + tun = priv->tun; + + for (j = tun->count-1; j > 0; j--) + if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO) + break; + /* default t_params (j=0) will be used if desired type wasn't found */ + t_params = &tun->params[j]; + + /* Select Radio 1st IF used */ + switch (t_params->radio_if) { + case 0: /* 10.7 MHz */ + freq += (unsigned int)(10.7*16000); + break; + case 1: /* 33.3 MHz */ + freq += (unsigned int)(33.3*16000); + break; + case 2: /* 41.3 MHz */ + freq += (unsigned int)(41.3*16000); + break; + default: + tuner_warn("Unsupported radio_if value %d\n", + t_params->radio_if); + return 0; + } + + /* Bandswitch byte */ + simple_radio_bandswitch(fe, &buffer[0]); + + buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) | + TUNER_RATIO_SELECT_50; /* 50 kHz step */ + + /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps + freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) = + freq * (1/800) */ + div = (freq + 400) / 800; + + if (t_params->cb_first_if_lower_freq && div < priv->last_div) { + buffer[0] = buffer[2]; + buffer[1] = buffer[3]; + buffer[2] = (div>>8) & 0x7f; + buffer[3] = div & 0xff; + } else { + buffer[0] = (div>>8) & 0x7f; + buffer[1] = div & 0xff; + } + + tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n", + buffer[0], buffer[1], buffer[2], buffer[3]); + priv->last_div = div; + + if (t_params->has_tda9887) { + int config = 0; + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &config; + + if (t_params->port1_active && + !t_params->port1_fm_high_sensitivity) + config |= TDA9887_PORT1_ACTIVE; + if (t_params->port2_active && + !t_params->port2_fm_high_sensitivity) + config |= TDA9887_PORT2_ACTIVE; + if (t_params->intercarrier_mode) + config |= TDA9887_INTERCARRIER; +/* if (t_params->port1_set_for_fm_mono) + config &= ~TDA9887_PORT1_ACTIVE;*/ + if (t_params->fm_gain_normal) + config |= TDA9887_GAIN_NORMAL; + if (t_params->radio_if == 2) + config |= TDA9887_RIF_41_3; + i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, + &tda9887_cfg); + } + rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); + if (4 != rc) + tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc); + + return 0; +} + +static int simple_set_params(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + int ret = -EINVAL; + + if (priv->i2c_props.adap == NULL) + return -EINVAL; + + switch (params->mode) { + case V4L2_TUNER_RADIO: + ret = simple_set_radio_freq(fe, params); + priv->frequency = params->frequency * 125 / 2; + break; + case V4L2_TUNER_ANALOG_TV: + case V4L2_TUNER_DIGITAL_TV: + ret = simple_set_tv_freq(fe, params); + priv->frequency = params->frequency * 62500; + break; + } + priv->bandwidth = 0; + + return ret; +} + +static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf, + const struct dvb_frontend_parameters *params) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + + switch (priv->type) { + case TUNER_PHILIPS_FMD1216ME_MK3: + if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ && + params->frequency >= 158870000) + buf[3] |= 0x08; + break; + case TUNER_PHILIPS_TD1316: + /* determine band */ + buf[3] |= (params->frequency < 161000000) ? 1 : + (params->frequency < 444000000) ? 2 : 4; + + /* setup PLL filter */ + if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) + buf[3] |= 1 << 3; + break; + case TUNER_PHILIPS_TUV1236D: + case TUNER_PHILIPS_FCV1236D: + { + unsigned int new_rf; + + if (dtv_input[priv->nr]) + new_rf = dtv_input[priv->nr]; + else + switch (params->u.vsb.modulation) { + case QAM_64: + case QAM_256: + new_rf = 1; + break; + case VSB_8: + default: + new_rf = 0; + break; + } + simple_set_rf_input(fe, &buf[2], &buf[3], new_rf); + break; + } + default: + break; + } +} + +static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf, + const struct dvb_frontend_parameters *params) +{ + /* This function returns the tuned frequency on success, 0 on error */ + struct tuner_simple_priv *priv = fe->tuner_priv; + struct tunertype *tun = priv->tun; + static struct tuner_params *t_params; + u8 config, cb; + u32 div; + int ret, frequency = params->frequency / 62500; + + t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL); + ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb); + if (ret < 0) + return 0; /* failure */ + + div = ((frequency + t_params->iffreq) * 62500 + offset + + tun->stepsize/2) / tun->stepsize; + + buf[0] = div >> 8; + buf[1] = div & 0xff; + buf[2] = config; + buf[3] = cb; + + simple_set_dvb(fe, buf, params); + + tuner_dbg("%s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n", + tun->name, div, buf[0], buf[1], buf[2], buf[3]); + + /* calculate the frequency we set it to */ + return (div * tun->stepsize) - t_params->iffreq; +} + +static int simple_dvb_calc_regs(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, + u8 *buf, int buf_len) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + u32 frequency; + + if (buf_len < 5) + return -EINVAL; + + frequency = simple_dvb_configure(fe, buf+1, params); + if (frequency == 0) + return -EINVAL; + + buf[0] = priv->i2c_props.addr; + + priv->frequency = frequency; + priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? + params->u.ofdm.bandwidth : 0; + + return 5; +} + +static int simple_dvb_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + u32 prev_freq, prev_bw; + int ret; + u8 buf[5]; + + if (priv->i2c_props.adap == NULL) + return -EINVAL; + + prev_freq = priv->frequency; + prev_bw = priv->bandwidth; + + ret = simple_dvb_calc_regs(fe, params, buf, 5); + if (ret != 5) + goto fail; + + /* put analog demod in standby when tuning digital */ + if (fe->ops.analog_ops.standby) + fe->ops.analog_ops.standby(fe); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* buf[0] contains the i2c address, but * + * we already have it in i2c_props.addr */ + ret = tuner_i2c_xfer_send(&priv->i2c_props, buf+1, 4); + if (ret != 4) + goto fail; + + return 0; +fail: + /* calc_regs sets frequency and bandwidth. if we failed, unset them */ + priv->frequency = prev_freq; + priv->bandwidth = prev_bw; + + return ret; +} + +static int simple_init(struct dvb_frontend *fe) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + + if (priv->i2c_props.adap == NULL) + return -EINVAL; + + if (priv->tun->initdata) { + int ret; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = tuner_i2c_xfer_send(&priv->i2c_props, + priv->tun->initdata + 1, + priv->tun->initdata[0]); + if (ret != priv->tun->initdata[0]) + return ret; + } + + return 0; +} + +static int simple_sleep(struct dvb_frontend *fe) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + + if (priv->i2c_props.adap == NULL) + return -EINVAL; + + if (priv->tun->sleepdata) { + int ret; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = tuner_i2c_xfer_send(&priv->i2c_props, + priv->tun->sleepdata + 1, + priv->tun->sleepdata[0]); + if (ret != priv->tun->sleepdata[0]) + return ret; + } + + return 0; +} + +static int simple_release(struct dvb_frontend *fe) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + + mutex_lock(&tuner_simple_list_mutex); + + if (priv) + hybrid_tuner_release_state(priv); + + mutex_unlock(&tuner_simple_list_mutex); + + fe->tuner_priv = NULL; + + return 0; +} + +static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static int simple_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + *bandwidth = priv->bandwidth; + return 0; +} + +static struct dvb_tuner_ops simple_tuner_ops = { + .init = simple_init, + .sleep = simple_sleep, + .set_analog_params = simple_set_params, + .set_params = simple_dvb_set_params, + .calc_regs = simple_dvb_calc_regs, + .release = simple_release, + .get_frequency = simple_get_frequency, + .get_bandwidth = simple_get_bandwidth, + .get_status = simple_get_status, + .get_rf_strength = simple_get_rf_strength, +}; + +struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c_adap, + u8 i2c_addr, + unsigned int type) +{ + struct tuner_simple_priv *priv = NULL; + int instance; + + if (type >= tuner_count) { + printk(KERN_WARNING "%s: invalid tuner type: %d (max: %d)\n", + __func__, type, tuner_count-1); + return NULL; + } + + /* If i2c_adap is set, check that the tuner is at the correct address. + * Otherwise, if i2c_adap is NULL, the tuner will be programmed directly + * by the digital demod via calc_regs. + */ + if (i2c_adap != NULL) { + u8 b[1]; + struct i2c_msg msg = { + .addr = i2c_addr, .flags = I2C_M_RD, + .buf = b, .len = 1, + }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (1 != i2c_transfer(i2c_adap, &msg, 1)) + printk(KERN_WARNING "tuner-simple %d-%04x: " + "unable to probe %s, proceeding anyway.", + i2c_adapter_id(i2c_adap), i2c_addr, + tuners[type].name); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + mutex_lock(&tuner_simple_list_mutex); + + instance = hybrid_tuner_request_state(struct tuner_simple_priv, priv, + hybrid_tuner_instance_list, + i2c_adap, i2c_addr, + "tuner-simple"); + switch (instance) { + case 0: + mutex_unlock(&tuner_simple_list_mutex); + return NULL; + break; + case 1: + fe->tuner_priv = priv; + + priv->type = type; + priv->tun = &tuners[type]; + priv->nr = simple_devcount++; + break; + default: + fe->tuner_priv = priv; + break; + } + + mutex_unlock(&tuner_simple_list_mutex); + + memcpy(&fe->ops.tuner_ops, &simple_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + tuner_info("type set to %d (%s)\n", type, priv->tun->name); + + if ((debug) || ((atv_input[priv->nr] > 0) || + (dtv_input[priv->nr] > 0))) { + if (0 == atv_input[priv->nr]) + tuner_info("tuner %d atv rf input will be " + "autoselected\n", priv->nr); + else + tuner_info("tuner %d atv rf input will be " + "set to input %d (insmod option)\n", + priv->nr, atv_input[priv->nr]); + if (0 == dtv_input[priv->nr]) + tuner_info("tuner %d dtv rf input will be " + "autoselected\n", priv->nr); + else + tuner_info("tuner %d dtv rf input will be " + "set to input %d (insmod option)\n", + priv->nr, dtv_input[priv->nr]); + } + + strlcpy(fe->ops.tuner_ops.info.name, priv->tun->name, + sizeof(fe->ops.tuner_ops.info.name)); + + return fe; +} +EXPORT_SYMBOL_GPL(simple_tuner_attach); + +MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver"); +MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); +MODULE_LICENSE("GPL"); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/video/tuner-simple.h b/drivers/media/common/tuners/tuner-simple.h index 9089939a8c0..381fa5d35a9 100644 --- a/drivers/media/video/tuner-simple.h +++ b/drivers/media/common/tuners/tuner-simple.h @@ -20,25 +20,18 @@ #include <linux/i2c.h> #include "dvb_frontend.h" -struct simple_tuner_config -{ - /* chip type */ - unsigned int type; - struct tunertype *tun; -}; - -#if defined(CONFIG_TUNER_SIMPLE) || (defined(CONFIG_TUNER_SIMPLE_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_SIMPLE) || (defined(CONFIG_MEDIA_TUNER_SIMPLE_MODULE) && defined(MODULE)) extern struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c_adap, u8 i2c_addr, - struct simple_tuner_config *cfg); + unsigned int type); #else static inline struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c_adap, u8 i2c_addr, - struct simple_tuner_config *cfg) + unsigned int type) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/video/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 883047f9c28..10dddca8b5d 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -35,6 +35,27 @@ * based on the video standard in use. */ +/* The following was taken from dvb-pll.c: */ + +/* Set AGC TOP value to 103 dBuV: + * 0x80 = Control Byte + * 0x40 = 250 uA charge pump (irrelevant) + * 0x18 = Aux Byte to follow + * 0x06 = 64.5 kHz divider (irrelevant) + * 0x01 = Disable Vt (aka sleep) + * + * 0x00 = AGC Time constant 2s Iagc = 300 nA (vs 0x80 = 9 nA) + * 0x50 = AGC Take over point = 103 dBuV + */ +static u8 tua603x_agc103[] = { 2, 0x80|0x40|0x18|0x06|0x01, 0x00|0x50 }; + +/* 0x04 = 166.67 kHz divider + * + * 0x80 = AGC Time constant 50ms Iagc = 9 uA + * 0x20 = AGC Take over point = 112 dBuV + */ +static u8 tua603x_agc112[] = { 2, 0x80|0x40|0x18|0x04|0x01, 0x80|0x20 }; + /* 0-9 */ /* ------------ TUNER_TEMIC_PAL - TEMIC PAL ------------ */ @@ -594,19 +615,31 @@ static struct tuner_params tuner_philips_pal_mk_params[] = { }, }; -/* ---- TUNER_PHILIPS_ATSC - Philips FCV1236D (ATSC/NTSC) ---- */ +/* ---- TUNER_PHILIPS_FCV1236D - Philips FCV1236D (ATSC/NTSC) ---- */ -static struct tuner_range tuner_philips_fcv1236d_ranges[] = { - { 16 * 157.25 /*MHz*/, 0x8e, 0xa0, }, - { 16 * 451.25 /*MHz*/, 0x8e, 0x90, }, +static struct tuner_range tuner_philips_fcv1236d_ntsc_ranges[] = { + { 16 * 157.25 /*MHz*/, 0x8e, 0xa2, }, + { 16 * 451.25 /*MHz*/, 0x8e, 0x92, }, + { 16 * 999.99 , 0x8e, 0x32, }, +}; + +static struct tuner_range tuner_philips_fcv1236d_atsc_ranges[] = { + { 16 * 159.00 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 453.00 /*MHz*/, 0x8e, 0x90, }, { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_philips_fcv1236d_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_philips_fcv1236d_ranges, - .count = ARRAY_SIZE(tuner_philips_fcv1236d_ranges), + .ranges = tuner_philips_fcv1236d_ntsc_ranges, + .count = ARRAY_SIZE(tuner_philips_fcv1236d_ntsc_ranges), + }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_philips_fcv1236d_atsc_ranges, + .count = ARRAY_SIZE(tuner_philips_fcv1236d_atsc_ranges), + .iffreq = 16 * 44.00, }, }; @@ -701,12 +734,24 @@ static struct tuner_range tuner_microtune_4042fi5_ntsc_ranges[] = { { 16 * 999.99 , 0x8e, 0x31, }, }; +static struct tuner_range tuner_microtune_4042fi5_atsc_ranges[] = { + { 16 * 162.00 /*MHz*/, 0x8e, 0xa1, }, + { 16 * 457.00 /*MHz*/, 0x8e, 0x91, }, + { 16 * 999.99 , 0x8e, 0x31, }, +}; + static struct tuner_params tuner_microtune_4042fi5_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_microtune_4042fi5_ntsc_ranges, .count = ARRAY_SIZE(tuner_microtune_4042fi5_ntsc_ranges), }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_microtune_4042fi5_atsc_ranges, + .count = ARRAY_SIZE(tuner_microtune_4042fi5_atsc_ranges), + .iffreq = 16 * 44.00 /*MHz*/, + }, }; /* 50-59 */ @@ -740,6 +785,7 @@ static struct tuner_params tuner_philips_fm1256_ih3_params[] = { /* ------------ TUNER_THOMSON_DTT7610 - THOMSON ATSC ------------ */ +/* single range used for both ntsc and atsc */ static struct tuner_range tuner_thomson_dtt7610_ntsc_ranges[] = { { 16 * 157.25 /*MHz*/, 0x8e, 0x39, }, { 16 * 454.00 /*MHz*/, 0x8e, 0x3a, }, @@ -752,6 +798,12 @@ static struct tuner_params tuner_thomson_dtt7610_params[] = { .ranges = tuner_thomson_dtt7610_ntsc_ranges, .count = ARRAY_SIZE(tuner_thomson_dtt7610_ntsc_ranges), }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_thomson_dtt7610_ntsc_ranges, + .count = ARRAY_SIZE(tuner_thomson_dtt7610_ntsc_ranges), + .iffreq = 16 * 44.00 /*MHz*/, + }, }; /* ------------ TUNER_PHILIPS_FQ1286 - Philips NTSC ------------ */ @@ -855,6 +907,11 @@ static struct tuner_range tuner_thomson_dtt761x_ntsc_ranges[] = { { 16 * 999.99 , 0x8e, 0x3c, }, }; +static struct tuner_range tuner_thomson_dtt761x_atsc_ranges[] = { + { 16 * 147.00 /*MHz*/, 0x8e, 0x39, }, + { 16 * 417.00 /*MHz*/, 0x8e, 0x3a, }, + { 16 * 999.99 , 0x8e, 0x3c, }, +}; static struct tuner_params tuner_thomson_dtt761x_params[] = { { @@ -865,6 +922,12 @@ static struct tuner_params tuner_thomson_dtt761x_params[] = { .fm_gain_normal = 1, .radio_if = 2, /* 41.3 MHz */ }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_thomson_dtt761x_atsc_ranges, + .count = ARRAY_SIZE(tuner_thomson_dtt761x_atsc_ranges), + .iffreq = 16 * 44.00, /*MHz*/ + }, }; /* ------------ TUNER_TENA_9533_DI - Philips PAL ------------ */ @@ -891,6 +954,15 @@ static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = { { 16 * 999.99 , 0x86, 0x54, }, }; +static struct tuner_range tuner_philips_fmd1216me_mk3_dvb_ranges[] = { + { 16 * 143.87 /*MHz*/, 0xbc, 0x41 }, + { 16 * 158.87 /*MHz*/, 0xf4, 0x41 }, + { 16 * 329.87 /*MHz*/, 0xbc, 0x42 }, + { 16 * 441.87 /*MHz*/, 0xf4, 0x42 }, + { 16 * 625.87 /*MHz*/, 0xbc, 0x44 }, + { 16 * 803.87 /*MHz*/, 0xf4, 0x44 }, + { 16 * 999.99 , 0xfc, 0x44 }, +}; static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = { { @@ -904,6 +976,12 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = { .port2_invert_for_secam_lc = 1, .port1_set_for_fm_mono = 1, }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_philips_fmd1216me_mk3_dvb_ranges, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_dvb_ranges), + .iffreq = 16 * 36.125, /*MHz*/ + }, }; @@ -915,6 +993,11 @@ static struct tuner_range tuner_tua6034_ntsc_ranges[] = { { 16 * 999.99 , 0x8e, 0x04 }, }; +static struct tuner_range tuner_tua6034_atsc_ranges[] = { + { 16 * 165.00 /*MHz*/, 0xce, 0x01 }, + { 16 * 450.00 /*MHz*/, 0xce, 0x02 }, + { 16 * 999.99 , 0xce, 0x04 }, +}; static struct tuner_params tuner_lg_tdvs_h06xf_params[] = { { @@ -922,6 +1005,12 @@ static struct tuner_params tuner_lg_tdvs_h06xf_params[] = { .ranges = tuner_tua6034_ntsc_ranges, .count = ARRAY_SIZE(tuner_tua6034_ntsc_ranges), }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_tua6034_atsc_ranges, + .count = ARRAY_SIZE(tuner_tua6034_atsc_ranges), + .iffreq = 16 * 44.00, + }, }; /* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */ @@ -974,12 +1063,30 @@ static struct tuner_range tuner_philips_td1316_pal_ranges[] = { { 16 * 999.99 , 0xc8, 0xa4, }, }; +static struct tuner_range tuner_philips_td1316_dvb_ranges[] = { + { 16 * 93.834 /*MHz*/, 0xca, 0x60, }, + { 16 * 123.834 /*MHz*/, 0xca, 0xa0, }, + { 16 * 163.834 /*MHz*/, 0xca, 0xc0, }, + { 16 * 253.834 /*MHz*/, 0xca, 0x60, }, + { 16 * 383.834 /*MHz*/, 0xca, 0xa0, }, + { 16 * 443.834 /*MHz*/, 0xca, 0xc0, }, + { 16 * 583.834 /*MHz*/, 0xca, 0x60, }, + { 16 * 793.834 /*MHz*/, 0xca, 0xa0, }, + { 16 * 999.999 , 0xca, 0xe0, }, +}; + static struct tuner_params tuner_philips_td1316_params[] = { { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_philips_td1316_pal_ranges, .count = ARRAY_SIZE(tuner_philips_td1316_pal_ranges), }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_philips_td1316_dvb_ranges, + .count = ARRAY_SIZE(tuner_philips_td1316_dvb_ranges), + .iffreq = 16 * 36.166667 /*MHz*/, + }, }; /* ------------ TUNER_PHILIPS_TUV1236D - Philips ATSC ------------ */ @@ -990,6 +1097,11 @@ static struct tuner_range tuner_tuv1236d_ntsc_ranges[] = { { 16 * 999.99 , 0xce, 0x04, }, }; +static struct tuner_range tuner_tuv1236d_atsc_ranges[] = { + { 16 * 157.25 /*MHz*/, 0xc6, 0x41, }, + { 16 * 454.00 /*MHz*/, 0xc6, 0x42, }, + { 16 * 999.99 , 0xc6, 0x44, }, +}; static struct tuner_params tuner_tuv1236d_params[] = { { @@ -997,6 +1109,12 @@ static struct tuner_params tuner_tuv1236d_params[] = { .ranges = tuner_tuv1236d_ntsc_ranges, .count = ARRAY_SIZE(tuner_tuv1236d_ntsc_ranges), }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_tuv1236d_atsc_ranges, + .count = ARRAY_SIZE(tuner_tuv1236d_atsc_ranges), + .iffreq = 16 * 44.00, + }, }; /* ------------ TUNER_TNF_xxx5 - Texas Instruments--------- */ @@ -1050,17 +1168,30 @@ static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = { /* ------------ TUNER_THOMSON_FE6600 - DViCO Hybrid PAL ------------ */ -static struct tuner_range tuner_thomson_fe6600_ranges[] = { +static struct tuner_range tuner_thomson_fe6600_pal_ranges[] = { { 16 * 160.00 /*MHz*/, 0xfe, 0x11, }, { 16 * 442.00 /*MHz*/, 0xf6, 0x12, }, { 16 * 999.99 , 0xf6, 0x18, }, }; +static struct tuner_range tuner_thomson_fe6600_dvb_ranges[] = { + { 16 * 250.00 /*MHz*/, 0xb4, 0x12, }, + { 16 * 455.00 /*MHz*/, 0xfe, 0x11, }, + { 16 * 775.50 /*MHz*/, 0xbc, 0x18, }, + { 16 * 999.99 , 0xf4, 0x18, }, +}; + static struct tuner_params tuner_thomson_fe6600_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_thomson_fe6600_ranges, - .count = ARRAY_SIZE(tuner_thomson_fe6600_ranges), + .ranges = tuner_thomson_fe6600_pal_ranges, + .count = ARRAY_SIZE(tuner_thomson_fe6600_pal_ranges), + }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_thomson_fe6600_dvb_ranges, + .count = ARRAY_SIZE(tuner_thomson_fe6600_dvb_ranges), + .iffreq = 16 * 36.125 /*MHz*/, }, }; @@ -1303,10 +1434,13 @@ struct tunertype tuners[] = { .params = tuner_philips_pal_mk_params, .count = ARRAY_SIZE(tuner_philips_pal_mk_params), }, - [TUNER_PHILIPS_ATSC] = { /* Philips ATSC */ + [TUNER_PHILIPS_FCV1236D] = { /* Philips ATSC */ .name = "Philips FCV1236D ATSC/NTSC dual in", .params = tuner_philips_fcv1236d_params, .count = ARRAY_SIZE(tuner_philips_fcv1236d_params), + .min = 16 * 53.00, + .max = 16 * 803.00, + .stepsize = 62500, }, [TUNER_PHILIPS_FM1236_MK3] = { /* Philips NTSC */ .name = "Philips NTSC MK3 (FM1236MK3 or FM1236/F)", @@ -1342,6 +1476,9 @@ struct tunertype tuners[] = { .name = "Microtune 4042 FI5 ATSC/NTSC dual in", .params = tuner_microtune_4042fi5_params, .count = ARRAY_SIZE(tuner_microtune_4042fi5_params), + .min = 16 * 57.00, + .max = 16 * 858.00, + .stepsize = 62500, }, /* 50-59 */ @@ -1359,6 +1496,9 @@ struct tunertype tuners[] = { .name = "Thomson DTT 7610 (ATSC/NTSC)", .params = tuner_thomson_dtt7610_params, .count = ARRAY_SIZE(tuner_thomson_dtt7610_params), + .min = 16 * 44.00, + .max = 16 * 958.00, + .stepsize = 62500, }, [TUNER_PHILIPS_FQ1286] = { /* Philips NTSC */ .name = "Philips FQ1286", @@ -1400,6 +1540,10 @@ struct tunertype tuners[] = { .name = "Thomson DTT 761X (ATSC/NTSC)", .params = tuner_thomson_dtt761x_params, .count = ARRAY_SIZE(tuner_thomson_dtt761x_params), + .min = 16 * 57.00, + .max = 16 * 863.00, + .stepsize = 62500, + .initdata = tua603x_agc103, }, [TUNER_TENA_9533_DI] = { /* Philips PAL */ .name = "Tena TNF9533-D/IF/TNF9533-B/DF", @@ -1414,11 +1558,20 @@ struct tunertype tuners[] = { .name = "Philips FMD1216ME MK3 Hybrid Tuner", .params = tuner_philips_fmd1216me_mk3_params, .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_params), + .min = 16 * 50.87, + .max = 16 * 858.00, + .stepsize = 166667, + .initdata = tua603x_agc112, + .sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 }, }, [TUNER_LG_TDVS_H06XF] = { /* LGINNOTEK ATSC */ .name = "LG TDVS-H06xF", /* H061F, H062F & H064F */ .params = tuner_lg_tdvs_h06xf_params, .count = ARRAY_SIZE(tuner_lg_tdvs_h06xf_params), + .min = 16 * 54.00, + .max = 16 * 863.00, + .stepsize = 62500, + .initdata = tua603x_agc103, }, [TUNER_YMEC_TVF66T5_B_DFF] = { /* Philips PAL */ .name = "Ymec TVF66T5-B/DFF", @@ -1434,11 +1587,17 @@ struct tunertype tuners[] = { .name = "Philips TD1316 Hybrid Tuner", .params = tuner_philips_td1316_params, .count = ARRAY_SIZE(tuner_philips_td1316_params), + .min = 16 * 87.00, + .max = 16 * 895.00, + .stepsize = 166667, }, [TUNER_PHILIPS_TUV1236D] = { /* Philips ATSC */ .name = "Philips TUV1236D ATSC/NTSC dual in", .params = tuner_tuv1236d_params, .count = ARRAY_SIZE(tuner_tuv1236d_params), + .min = 16 * 54.00, + .max = 16 * 864.00, + .stepsize = 62500, }, [TUNER_TNF_5335MF] = { /* Tenna PAL/NTSC */ .name = "Tena TNF 5335 and similar models", @@ -1460,6 +1619,9 @@ struct tunertype tuners[] = { .name = "Thomson FE6600", .params = tuner_thomson_fe6600_params, .count = ARRAY_SIZE(tuner_thomson_fe6600_params), + .min = 16 * 44.25, + .max = 16 * 858.00, + .stepsize = 166667, }, [TUNER_SAMSUNG_TCPG_6121P30A] = { /* Samsung PAL */ .name = "Samsung TCPG 6121P30A", @@ -1480,5 +1642,11 @@ struct tunertype tuners[] = { /* see xc5000.c for details */ }, }; +EXPORT_SYMBOL(tuners); unsigned const int tuner_count = ARRAY_SIZE(tuners); +EXPORT_SYMBOL(tuner_count); + +MODULE_DESCRIPTION("Simple tuner device type database"); +MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/tuner-xc2028-types.h b/drivers/media/common/tuners/tuner-xc2028-types.h index d0057fbf0ec..74dc46a71f6 100644 --- a/drivers/media/video/tuner-xc2028-types.h +++ b/drivers/media/common/tuners/tuner-xc2028-types.h @@ -1,6 +1,9 @@ /* tuner-xc2028_types * - * Copyright (c) 2007 Mauro Carvalho Chehab (mchehab@infradead.org) + * This file includes internal tipes to be used inside tuner-xc2028. + * Shouldn't be included outside tuner-xc2028 + * + * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org) * This code is placed under the terms of the GNU General Public License v2 */ @@ -54,11 +57,13 @@ /* LCD firmwares exist only for MTS STD/MN (PAL or NTSC/M) and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr) There are variants both with and without NOGD + Those firmwares produce better result with LCD displays */ #define LCD (1<<12) /* NOGD firmwares exist only for MTS STD/MN (PAL or NTSC/M) and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr) + The NOGD firmwares don't have group delay compensation filter */ #define NOGD (1<<13) @@ -85,11 +90,19 @@ /* This flag identifies that the scode table has a new format */ #define HAS_IF (1 << 30) -#define SCODE_TYPES (MTS|DTV6|QAM|DTV7|DTV78|DTV8|LCD|NOGD|MONO|ATSC|IF| \ - LG60|ATI638|OREN538|OREN36|TOYOTA388|TOYOTA794| \ - DIBCOM52|ZARLINK456|CHINA|F6MHZ|SCODE) +/* There are different scode tables for MTS and non-MTS. + The MTS firmwares support mono only + */ +#define SCODE_TYPES (SCODE | MTS) + -/* Newer types to be moved to videodev2.h */ +/* Newer types not defined on videodev2.h. + The original idea were to move all those types to videodev2.h, but + it seemed overkill, since, with the exception of SECAM/K3, the other + types seem to be autodetected. + It is not clear where secam/k3 is used, nor we have a feedback of this + working or being autodetected by the standard secam firmware. + */ #define V4L2_STD_SECAM_K3 (0x04000000) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index 50cf876f020..0cbde17bfbb 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -1,6 +1,6 @@ /* tuner-xc2028 * - * Copyright (c) 2007 Mauro Carvalho Chehab (mchehab@infradead.org) + * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org) * * Copyright (c) 2007 Michel Ludwig (michel.ludwig@gmail.com) * - frontend interface @@ -23,8 +23,6 @@ #include "dvb_frontend.h" -#define PREFIX "xc2028" - static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); @@ -43,7 +41,12 @@ MODULE_PARM_DESC(audio_std, "NICAM/A\n" "NICAM/B\n"); -static LIST_HEAD(xc2028_list); +static char firmware_name[FIRMWARE_NAME_MAX]; +module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); +MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " + "default firmware name\n"); + +static LIST_HEAD(hybrid_tuner_instance_list); static DEFINE_MUTEX(xc2028_list_mutex); /* struct for storing firmware table */ @@ -65,12 +68,11 @@ struct firmware_properties { }; struct xc2028_data { - struct list_head xc2028_list; + struct list_head hybrid_tuner_instance_list; struct tuner_i2c_props i2c_props; int (*tuner_callback) (void *dev, int command, int arg); void *video_dev; - int count; __u32 frequency; struct firmware_description *firm; @@ -127,12 +129,12 @@ struct xc2028_data { _rc; \ }) -static unsigned int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val) +static int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val) { unsigned char buf[2]; unsigned char ibuf[2]; - tuner_dbg("%s %04x called\n", __FUNCTION__, reg); + tuner_dbg("%s %04x called\n", __func__, reg); buf[0] = reg >> 8; buf[1] = (unsigned char) reg; @@ -145,7 +147,7 @@ static unsigned int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val) } #define dump_firm_type(t) dump_firm_type_and_int_freq(t, 0) -void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq) +static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq) { if (type & BASE) printk("BASE "); @@ -232,6 +234,7 @@ static v4l2_std_id parse_audio_std_option(void) static void free_firmware(struct xc2028_data *priv) { int i; + tuner_dbg("%s called\n", __func__); if (!priv->firm) return; @@ -255,19 +258,24 @@ static int load_all_firmwares(struct dvb_frontend *fe) int rc = 0; int n, n_array; char name[33]; + char *fname; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); + + if (!firmware_name[0]) + fname = priv->ctrl.fname; + else + fname = firmware_name; - tuner_dbg("Reading firmware %s\n", priv->ctrl.fname); - rc = request_firmware(&fw, priv->ctrl.fname, - &priv->i2c_props.adap->dev); + tuner_dbg("Reading firmware %s\n", fname); + rc = request_firmware(&fw, fname, &priv->i2c_props.adap->dev); if (rc < 0) { if (rc == -ENOENT) tuner_err("Error: firmware %s not found.\n", - priv->ctrl.fname); + fname); else tuner_err("Error %d while requesting firmware %s \n", - rc, priv->ctrl.fname); + rc, fname); return rc; } @@ -276,7 +284,7 @@ static int load_all_firmwares(struct dvb_frontend *fe) if (fw->size < sizeof(name) - 1 + 2 + 2) { tuner_err("Error: firmware file %s has invalid size!\n", - priv->ctrl.fname); + fname); goto corrupt; } @@ -291,7 +299,7 @@ static int load_all_firmwares(struct dvb_frontend *fe) p += 2; tuner_info("Loading %d firmware images from %s, type: %s, ver %d.%d\n", - n_array, priv->ctrl.fname, name, + n_array, fname, name, priv->firm_version >> 8, priv->firm_version & 0xff); priv->firm = kzalloc(sizeof(*priv->firm) * n_array, GFP_KERNEL); @@ -395,9 +403,9 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, { struct xc2028_data *priv = fe->tuner_priv; int i, best_i = -1, best_nr_matches = 0; - unsigned int ign_firm_type_mask = 0; + unsigned int type_mask = 0; - tuner_dbg("%s called, want type=", __FUNCTION__); + tuner_dbg("%s called, want type=", __func__); if (debug) { dump_firm_type(type); printk("(%x), id %016llx.\n", type, (unsigned long long)*id); @@ -412,18 +420,23 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, *id = V4L2_STD_PAL; if (type & BASE) - type &= BASE_TYPES; + type_mask = BASE_TYPES; else if (type & SCODE) { type &= SCODE_TYPES; - ign_firm_type_mask = HAS_IF; + type_mask = SCODE_TYPES & ~HAS_IF; } else if (type & DTV_TYPES) - type &= DTV_TYPES; + type_mask = DTV_TYPES; else if (type & STD_SPECIFIC_TYPES) - type &= STD_SPECIFIC_TYPES; + type_mask = STD_SPECIFIC_TYPES; + + type &= type_mask; + + if (!(type & SCODE)) + type_mask = ~0; /* Seek for exact match */ for (i = 0; i < priv->firm_size; i++) { - if ((type == (priv->firm[i].type & ~ign_firm_type_mask)) && + if ((type == (priv->firm[i].type & type_mask)) && (*id == priv->firm[i].id)) goto found; } @@ -433,7 +446,7 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, v4l2_std_id match_mask; int nr_matches; - if (type != (priv->firm[i].type & ~ign_firm_type_mask)) + if (type != (priv->firm[i].type & type_mask)) continue; match_mask = *id & priv->firm[i].id; @@ -483,7 +496,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type, int pos, rc; unsigned char *p, *endp, buf[priv->ctrl.max_len]; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); pos = seek_firmware(fe, type, id); if (pos < 0) @@ -586,7 +599,7 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, int pos, rc; unsigned char *p; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); if (!int_freq) { pos = seek_firmware(fe, type, id); @@ -650,7 +663,7 @@ static int check_firmware(struct dvb_frontend *fe, unsigned int type, u16 version, hwmodel; v4l2_std_id std0; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); if (!priv->firm) { if (!priv->ctrl.fname) { @@ -770,10 +783,10 @@ check_device: goto fail; } - tuner_info("Device is Xceive %d version %d.%d, " - "firmware version %d.%d\n", - hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8, - (version & 0xf0) >> 4, version & 0xf); + tuner_dbg("Device is Xceive %d version %d.%d, " + "firmware version %d.%d\n", + hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8, + (version & 0xf0) >> 4, version & 0xf); /* Check firmware version against what we downloaded. */ if (priv->firm_version != ((version & 0xf0) << 4 | (version & 0x0f))) { @@ -824,27 +837,34 @@ static int xc2028_signal(struct dvb_frontend *fe, u16 *strength) u16 frq_lock, signal = 0; int rc; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); mutex_lock(&priv->lock); /* Sync Lock Indicator */ rc = xc2028_get_reg(priv, 0x0002, &frq_lock); - if (rc < 0 || frq_lock == 0) + if (rc < 0) goto ret; - /* Frequency is locked. Return signal quality */ + /* Frequency is locked */ + if (frq_lock == 1) + signal = 32768; /* Get SNR of the video signal */ rc = xc2028_get_reg(priv, 0x0040, &signal); if (rc < 0) - signal = -frq_lock; + goto ret; + + /* Use both frq_lock and signal to generate the result */ + signal = signal || ((signal & 0x07) << 12); ret: mutex_unlock(&priv->lock); *strength = signal; + tuner_dbg("signal strength is %d\n", signal); + return rc; } @@ -861,7 +881,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, unsigned char buf[4]; u32 div, offset = 0; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); mutex_lock(&priv->lock); @@ -906,9 +926,11 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, if (rc < 0) goto ret; - rc = priv->tuner_callback(priv->video_dev, XC2028_RESET_CLK, 1); - if (rc < 0) - goto ret; + /* Return code shouldn't be checked. + The reset CLK is needed only with tm6000. + Driver should work fine even if this fails. + */ + priv->tuner_callback(priv->video_dev, XC2028_RESET_CLK, 1); msleep(10); @@ -942,7 +964,7 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe, struct xc2028_data *priv = fe->tuner_priv; unsigned int type=0; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); if (p->mode == V4L2_TUNER_RADIO) { type |= FM; @@ -975,7 +997,7 @@ static int xc2028_set_params(struct dvb_frontend *fe, fe_bandwidth_t bw = BANDWIDTH_8_MHZ; u16 demod = 0; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); if (priv->ctrl.d2633) type |= D2633; @@ -1040,50 +1062,28 @@ static int xc2028_set_params(struct dvb_frontend *fe, T_DIGITAL_TV, type, 0, demod); } -static int xc2028_sleep(struct dvb_frontend *fe) -{ - struct xc2028_data *priv = fe->tuner_priv; - int rc = 0; - - tuner_dbg("%s called\n", __FUNCTION__); - - mutex_lock(&priv->lock); - - if (priv->firm_version < 0x0202) - rc = send_seq(priv, {0x00, 0x08, 0x00, 0x00}); - else - rc = send_seq(priv, {0x80, 0x08, 0x00, 0x00}); - - priv->cur_fw.type = 0; /* need firmware reload */ - - mutex_unlock(&priv->lock); - - return rc; -} - static int xc2028_dvb_release(struct dvb_frontend *fe) { struct xc2028_data *priv = fe->tuner_priv; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); mutex_lock(&xc2028_list_mutex); - priv->count--; - - if (!priv->count) { - list_del(&priv->xc2028_list); - + /* only perform final cleanup if this is the last instance */ + if (hybrid_tuner_report_instance_count(priv) == 1) { kfree(priv->ctrl.fname); - free_firmware(priv); - kfree(priv); - fe->tuner_priv = NULL; } + if (priv) + hybrid_tuner_release_state(priv); + mutex_unlock(&xc2028_list_mutex); + fe->tuner_priv = NULL; + return 0; } @@ -1091,7 +1091,7 @@ static int xc2028_get_frequency(struct dvb_frontend *fe, u32 *frequency) { struct xc2028_data *priv = fe->tuner_priv; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); *frequency = priv->frequency; @@ -1104,25 +1104,25 @@ static int xc2028_set_config(struct dvb_frontend *fe, void *priv_cfg) struct xc2028_ctrl *p = priv_cfg; int rc = 0; - tuner_dbg("%s called\n", __FUNCTION__); + tuner_dbg("%s called\n", __func__); mutex_lock(&priv->lock); - kfree(priv->ctrl.fname); - free_firmware(priv); - memcpy(&priv->ctrl, p, sizeof(priv->ctrl)); - priv->ctrl.fname = NULL; + if (priv->ctrl.max_len < 9) + priv->ctrl.max_len = 13; if (p->fname) { + if (priv->ctrl.fname && strcmp(p->fname, priv->ctrl.fname)) { + kfree(priv->ctrl.fname); + free_firmware(priv); + } + priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL); if (priv->ctrl.fname == NULL) rc = -ENOMEM; } - if (priv->ctrl.max_len < 9) - priv->ctrl.max_len = 13; - mutex_unlock(&priv->lock); return rc; @@ -1142,58 +1142,59 @@ static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = { .get_frequency = xc2028_get_frequency, .get_rf_strength = xc2028_signal, .set_params = xc2028_set_params, - .sleep = xc2028_sleep, - }; struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg) { struct xc2028_data *priv; - void *video_dev; + int instance; if (debug) - printk(KERN_DEBUG PREFIX ": Xcv2028/3028 init called!\n"); + printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n"); - if (NULL == cfg || NULL == cfg->video_dev) + if (NULL == cfg) return NULL; if (!fe) { - printk(KERN_ERR PREFIX ": No frontend!\n"); + printk(KERN_ERR "xc2028: No frontend!\n"); return NULL; } - video_dev = cfg->video_dev; - mutex_lock(&xc2028_list_mutex); - list_for_each_entry(priv, &xc2028_list, xc2028_list) { - if (priv->video_dev == cfg->video_dev) { - video_dev = NULL; - break; - } - } - - if (video_dev) { - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) { - mutex_unlock(&xc2028_list_mutex); - return NULL; - } - - priv->i2c_props.addr = cfg->i2c_addr; - priv->i2c_props.adap = cfg->i2c_adap; - priv->video_dev = video_dev; + instance = hybrid_tuner_request_state(struct xc2028_data, priv, + hybrid_tuner_instance_list, + cfg->i2c_adap, cfg->i2c_addr, + "xc2028"); + switch (instance) { + case 0: + /* memory allocation failure */ + goto fail; + break; + case 1: + /* new tuner instance */ priv->tuner_callback = cfg->callback; priv->ctrl.max_len = 13; mutex_init(&priv->lock); - list_add_tail(&priv->xc2028_list, &xc2028_list); - } + /* analog side (tuner-core) uses i2c_adap->algo_data. + * digital side is not guaranteed to have algo_data defined. + * + * digital side will always have fe->dvb defined. + * analog side (tuner-core) doesn't (yet) define fe->dvb. + */ + priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : cfg->i2c_adap->algo_data; - fe->tuner_priv = priv; - priv->count++; + fe->tuner_priv = priv; + break; + case 2: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops, sizeof(xc2028_dvb_tuner_ops)); @@ -1206,6 +1207,11 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, mutex_unlock(&xc2028_list_mutex); return fe; +fail: + mutex_unlock(&xc2028_list_mutex); + + xc2028_dvb_release(fe); + return NULL; } EXPORT_SYMBOL(xc2028_attach); diff --git a/drivers/media/video/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h index 3eb8420379a..216025cf5d4 100644 --- a/drivers/media/video/tuner-xc2028.h +++ b/drivers/media/common/tuners/tuner-xc2028.h @@ -1,6 +1,6 @@ /* tuner-xc2028 * - * Copyright (c) 2007 Mauro Carvalho Chehab (mchehab@infradead.org) + * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org) * This code is placed under the terms of the GNU General Public License v2 */ @@ -12,7 +12,7 @@ #define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw" /* Dmoduler IF (kHz) */ -#define XC3028_FE_DEFAULT 0 +#define XC3028_FE_DEFAULT 0 /* Don't load SCODE */ #define XC3028_FE_LG60 6000 #define XC3028_FE_ATI638 6380 #define XC3028_FE_OREN538 5380 @@ -47,7 +47,7 @@ struct xc2028_config { #define XC2028_TUNER_RESET 0 #define XC2028_RESET_CLK 1 -#if defined(CONFIG_TUNER_XC2028) || (defined(CONFIG_TUNER_XC2028_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_XC2028) || (defined(CONFIG_MEDIA_TUNER_XC2028_MODULE) && defined(MODULE)) extern struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg); #else @@ -55,7 +55,7 @@ static inline struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg) { printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", - __FUNCTION__); + __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/common/tuners/xc5000.c index f642ca200b5..7cf4f5bdb2e 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -151,7 +151,7 @@ typedef struct { #define FM_Radio_INPUT2 21 #define FM_Radio_INPUT1 22 -XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { +static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020}, {"M/N-NTSC/PAL-A2", 0x0600, 0x8020}, {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020}, @@ -177,6 +177,7 @@ XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"FM Radio-INPUT1", 0x0208, 0x9002} }; +static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len); static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len); static void xc5000_TunerReset(struct dvb_frontend *fe); @@ -209,10 +210,10 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; int ret; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); if (priv->cfg->tuner_callback) { - ret = priv->cfg->tuner_callback(priv->cfg->priv, + ret = priv->cfg->tuner_callback(priv->devptr, XC5000_TUNER_RESET, 0); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); @@ -330,7 +331,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, u8 i2c_sequence[]) static int xc_initialize(struct xc5000_priv *priv) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); return xc_write_reg(priv, XREG_INIT, 0); } @@ -338,9 +339,9 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, u16 VideoMode, u16 AudioMode) { int ret; - dprintk(1, "%s(0x%04x,0x%04x)\n", __FUNCTION__, VideoMode, AudioMode); + dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode); dprintk(1, "%s() Standard = %s\n", - __FUNCTION__, + __func__, XC5000_Standard[priv->video_standard].Name); ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode); @@ -352,7 +353,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, static int xc_shutdown(struct xc5000_priv *priv) { - return 0; + return XC_RESULT_SUCCESS; /* Fixme: cannot bring tuner back alive once shutdown * without reloading the driver modules. * return xc_write_reg(priv, XREG_POWER_DOWN, 0); @@ -361,7 +362,7 @@ static int xc_shutdown(struct xc5000_priv *priv) static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) { - dprintk(1, "%s(%d) Source = %s\n", __FUNCTION__, rf_mode, + dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode, rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) @@ -369,7 +370,7 @@ static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) rf_mode = XC_RF_MODE_CABLE; printk(KERN_ERR "%s(), Invalid mode, defaulting to CABLE", - __FUNCTION__); + __func__); } return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode); } @@ -380,7 +381,7 @@ static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) { u16 freq_code; - dprintk(1, "%s(%u)\n", __FUNCTION__, freq_hz); + dprintk(1, "%s(%u)\n", __func__, freq_hz); if ((freq_hz > xc5000_tuner_ops.info.frequency_max) || (freq_hz < xc5000_tuner_ops.info.frequency_min)) @@ -396,7 +397,7 @@ static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz) { u32 freq_code = (freq_khz * 1024)/1000; dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n", - __FUNCTION__, freq_khz, freq_code); + __func__, freq_khz, freq_code); return xc_write_reg(priv, XREG_IF_OUT, freq_code); } @@ -488,7 +489,7 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz) { int found = 0; - dprintk(1, "%s(%u)\n", __FUNCTION__, freq_hz); + dprintk(1, "%s(%u)\n", __func__, freq_hz); if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS) return 0; @@ -627,12 +628,12 @@ static int xc5000_set_params(struct dvb_frontend *fe, struct xc5000_priv *priv = fe->tuner_priv; int ret; - dprintk(1, "%s() frequency=%d (Hz)\n", __FUNCTION__, params->frequency); + dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); switch(params->u.vsb.modulation) { case VSB_8: case VSB_16: - dprintk(1, "%s() VSB modulation\n", __FUNCTION__); + dprintk(1, "%s() VSB modulation\n", __func__); priv->rf_mode = XC_RF_MODE_AIR; priv->freq_hz = params->frequency - 1750000; priv->bandwidth = BANDWIDTH_6_MHZ; @@ -641,7 +642,7 @@ static int xc5000_set_params(struct dvb_frontend *fe, case QAM_64: case QAM_256: case QAM_AUTO: - dprintk(1, "%s() QAM modulation\n", __FUNCTION__); + dprintk(1, "%s() QAM modulation\n", __func__); priv->rf_mode = XC_RF_MODE_CABLE; priv->freq_hz = params->frequency - 1750000; priv->bandwidth = BANDWIDTH_6_MHZ; @@ -652,7 +653,7 @@ static int xc5000_set_params(struct dvb_frontend *fe, } dprintk(1, "%s() frequency=%d (compensated)\n", - __FUNCTION__, priv->freq_hz); + __func__, priv->freq_hz); ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { @@ -685,6 +686,25 @@ static int xc5000_set_params(struct dvb_frontend *fe, return 0; } +static int xc5000_is_firmware_loaded(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + u16 id; + + ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id); + if (ret == XC_RESULT_SUCCESS) { + if (id == XC_PRODUCT_ID_FW_NOT_LOADED) + ret = XC_RESULT_RESET_FAILURE; + else + ret = XC_RESULT_SUCCESS; + } + + dprintk(1, "%s() returns %s id = 0x%x\n", __func__, + ret == XC_RESULT_SUCCESS ? "True" : "False", id); + return ret; +} + static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); static int xc5000_set_analog_params(struct dvb_frontend *fe, @@ -693,11 +713,11 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, struct xc5000_priv *priv = fe->tuner_priv; int ret; - if(priv->fwloaded == 0) + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) xc_load_fw_and_init_tuner(fe); dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", - __FUNCTION__, params->frequency); + __func__, params->frequency); priv->rf_mode = XC_RF_MODE_CABLE; /* Fix me: it could be air. */ @@ -775,7 +795,7 @@ tune_channel: static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) { struct xc5000_priv *priv = fe->tuner_priv; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); *freq = priv->freq_hz; return 0; } @@ -783,7 +803,7 @@ static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) { struct xc5000_priv *priv = fe->tuner_priv; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); *bw = priv->bandwidth; return 0; @@ -796,7 +816,7 @@ static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) xc_get_lock_status(priv, &lock_status); - dprintk(1, "%s() lock_status = 0x%08x\n", __FUNCTION__, lock_status); + dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status); *status = lock_status; @@ -808,11 +828,10 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; int ret = 0; - if (priv->fwloaded == 0) { + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { ret = xc5000_fwupload(fe); if (ret != XC_RESULT_SUCCESS) return ret; - priv->fwloaded = 1; } /* Start the tuner self-calibration process */ @@ -836,7 +855,7 @@ static int xc5000_sleep(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; int ret; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); /* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized * once shutdown without reloading the driver. Maybe I am not @@ -848,11 +867,10 @@ static int xc5000_sleep(struct dvb_frontend *fe) if(ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: %s() unable to shutdown tuner\n", - __FUNCTION__); + __func__); return -EREMOTEIO; } else { - /* priv->fwloaded = 0; */ return XC_RESULT_SUCCESS; } } @@ -860,7 +878,7 @@ static int xc5000_sleep(struct dvb_frontend *fe) static int xc5000_init(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: Unable to initialise tuner\n"); @@ -875,7 +893,7 @@ static int xc5000_init(struct dvb_frontend *fe) static int xc5000_release(struct dvb_frontend *fe) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); kfree(fe->tuner_priv); fe->tuner_priv = NULL; return 0; @@ -900,14 +918,14 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = { .get_status = xc5000_get_status }; -struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct xc5000_config *cfg) +struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc5000_config *cfg, void *devptr) { struct xc5000_priv *priv = NULL; u16 id = 0; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL); if (priv == NULL) @@ -916,6 +934,7 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, priv->cfg = cfg; priv->bandwidth = BANDWIDTH_6_MHZ; priv->i2c = i2c; + priv->devptr = devptr; /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. @@ -932,7 +951,6 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, cfg->i2c_address); printk(KERN_INFO "xc5000: Firmware has been loaded previously\n"); - priv->fwloaded = 1; break; case XC_PRODUCT_ID_FW_NOT_LOADED: printk(KERN_INFO @@ -940,7 +958,6 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, cfg->i2c_address); printk(KERN_INFO "xc5000: Firmware has not been loaded previously\n"); - priv->fwloaded = 0; break; default: printk(KERN_ERR diff --git a/drivers/media/dvb/frontends/xc5000.h b/drivers/media/common/tuners/xc5000.h index 32a5f1c86a1..c910715addc 100644 --- a/drivers/media/dvb/frontends/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -31,33 +31,35 @@ struct xc5000_config { u8 i2c_address; u32 if_khz; - /* For each bridge framework, when it attaches either analog or digital, - * it has to store a reference back to its _core equivalent structure, - * so that it can service the hardware by steering gpio's etc. - * Each bridge implementation is different so cast priv accordingly. - * The xc5000 driver cares not for this value, other than ensuring - * it's passed back to a bridge during tuner_callback(). - */ - void *priv; int (*tuner_callback) (void *priv, int command, int arg); }; /* xc5000 callback command */ #define XC5000_TUNER_RESET 0 -#if defined(CONFIG_DVB_TUNER_XC5000) || \ - (defined(CONFIG_DVB_TUNER_XC5000_MODULE) && defined(MODULE)) +/* For each bridge framework, when it attaches either analog or digital, + * it has to store a reference back to its _core equivalent structure, + * so that it can service the hardware by steering gpio's etc. + * Each bridge implementation is different so cast devptr accordingly. + * The xc5000 driver cares not for this value, other than ensuring + * it's passed back to a bridge during tuner_callback(). + */ + +#if defined(CONFIG_MEDIA_TUNER_XC5000) || \ + (defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE)) extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg); + struct xc5000_config *cfg, + void *devptr); #else static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg) + struct xc5000_config *cfg, + void *devptr) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_TUNER_XC5000 +#endif // CONFIG_MEDIA_TUNER_XC5000 #endif // __XC5000_H__ diff --git a/drivers/media/dvb/frontends/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h index 13b2d19341d..a72a9887fe7 100644 --- a/drivers/media/dvb/frontends/xc5000_priv.h +++ b/drivers/media/common/tuners/xc5000_priv.h @@ -30,7 +30,8 @@ struct xc5000_priv { u32 bandwidth; u8 video_standard; u8 rf_mode; - u8 fwloaded; + + void *devptr; }; #endif diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 03ef88acd9b..7b21b49f194 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -1,9 +1,7 @@ # -# Multimedia device configuration +# DVB device configuration # -source "drivers/media/dvb/dvb-core/Kconfig" - menuconfig DVB_CAPTURE_DRIVERS bool "DVB/ATSC adapters" depends on DVB_CORE diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 3197aeb61d1..73dc2ee9b01 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -9,6 +9,11 @@ config DVB_B2C2_FLEXCOP select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_BCM3510 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select DVB_S5H1420 if !DVB_FE_CUSTOMISE + select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE + select DVB_ISL6421 if !DVB_FE_CUSTOMISE + select DVB_CX24123 if !DVB_FE_CUSTOMISE help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile index e97ff60a1ef..d9db066f985 100644 --- a/drivers/media/dvb/b2c2/Makefile +++ b/drivers/media/dvb/b2c2/Makefile @@ -2,6 +2,7 @@ b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \ flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o + ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),) b2c2-flexcop-objs += flexcop-dma.o endif @@ -13,3 +14,4 @@ b2c2-flexcop-usb-objs = flexcop-usb.o obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ +EXTRA_CFLAGS += -Idrivers/media/common/tuners/ diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h index 5a6c4fe249e..8ce06336e76 100644 --- a/drivers/media/dvb/b2c2/flexcop-common.h +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -44,6 +44,14 @@ struct flexcop_dma { u32 size; /* size of each address in bytes */ }; +struct flexcop_i2c_adapter { + struct flexcop_device *fc; + struct i2c_adapter i2c_adap; + + u8 no_base_addr; + flexcop_i2c_port_t port; +}; + /* Control structure for data definitions that are common to * the B2C2-based PCI and USB devices. */ @@ -72,7 +80,7 @@ struct flexcop_device { struct dmx_frontend mem_frontend; int (*fe_sleep) (struct dvb_frontend *); - struct i2c_adapter i2c_adap; + struct flexcop_i2c_adapter fc_i2c_adap[3]; struct mutex i2c_mutex; struct module *owner; @@ -87,7 +95,8 @@ struct flexcop_device { int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value); - int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + int (*i2c_request) (struct flexcop_i2c_adapter*, + flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); int (*stream_control) (struct flexcop_device*, int); int (*get_mac_addr) (struct flexcop_device *fc, int extended); @@ -128,8 +137,8 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended); * one. We have it in flexcop-i2c.c, because it is going via the actual * I2C-channel of the flexcop. */ -int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t, - flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); +int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t, + u8 chipaddr, u8 addr, u8 *buf, u16 len); /* from flexcop-sram.c */ int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target); diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c index 6f592bc32d2..a91ed28f03a 100644 --- a/drivers/media/dvb/b2c2/flexcop-dma.c +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -112,7 +112,7 @@ static int flexcop_dma_remap(struct flexcop_device *fc, { flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; flexcop_ibi_value v = fc->read_ibi_reg(fc,r); - deb_info("%s\n",__FUNCTION__); + deb_info("%s\n",__func__); v.dma_0xc.remap_enable = onoff; fc->write_ibi_reg(fc,r,v); return 0; @@ -162,7 +162,7 @@ int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_remap(fc,dma_idx,0); - deb_info("%s\n",__FUNCTION__); + deb_info("%s\n",__func__); v.dma_0x4_write.dmatimer = cycles; fc->write_ibi_reg(fc,r,v); return 0; diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c index bbcf070a178..8a8ae8a3e6b 100644 --- a/drivers/media/dvb/b2c2/flexcop-eeprom.c +++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c @@ -114,15 +114,18 @@ static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t { int i,ret = 0; u8 chipaddr = 0x50 | ((addr >> 8) & 3); - for (i = 0; i < retries; i++) - if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0) + for (i = 0; i < retries; i++) { + ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr, + addr & 0xff, buf, len); + if (ret == 0) break; + } return ret; } static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries) { - int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries); + int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries); if (ret == 0) if (calc_lrc(buf, len - 1) != buf[len - 1]) ret = -EINVAL; diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 0378fd64659..f9d087669d5 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -5,6 +5,8 @@ * * see flexcop.c for copyright information. */ +#include <media/tuner.h> + #include "flexcop.h" #include "stv0299.h" @@ -15,6 +17,15 @@ #include "mt312.h" #include "lgdt330x.h" #include "dvb-pll.h" +#include "tuner-simple.h" + +#include "s5h1420.h" +#include "itd1000.h" + +#include "cx24123.h" +#include "cx24113.h" + +#include "isl6421.h" /* lnb control */ @@ -180,13 +191,13 @@ static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dv buf[2] = 0x84; /* 0xC4 */ buf[3] = 0x08; - if (params->frequency < 1500000) buf[3] |= 0x10; + if (params->frequency < 1500000) + buf[3] |= 0x10; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) { + if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) return -EIO; - } return 0; } @@ -241,7 +252,7 @@ static struct stv0299_config samsung_tbmu24112_config = { .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_LK, + .lock_output = STV0299_LOCKOUTPUT_LK, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, @@ -337,7 +348,7 @@ static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) return -EIO; return 0; } @@ -386,10 +397,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]); - ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_TUNER, 0x61, buf[0], &buf[1], 3); + ret = fc->i2c_request(&fc->fc_i2c_adap[2], + FC_WRITE, 0x61, buf[0], &buf[1], 3); deb_tuner("tuner write returned: %d\n",ret); - return 0; + return ret; } static u8 alps_tdee4_stv0297_inittab[] = { @@ -472,56 +484,159 @@ static struct stv0297_config alps_tdee4_stv0297_config = { // .pll_set = alps_tdee4_stv0297_pll_set, }; + +/* SkyStar2 rev2.7 (a/u) */ +static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { + .demod_address = 0x53, + .invert = 1, + .repeated_start_workaround = 1, +}; + +static struct itd1000_config skystar2_rev2_7_itd1000_config = { + .i2c_address = 0x61, +}; + +/* SkyStar2 rev2.8 */ +static struct cx24123_config skystar2_rev2_8_cx24123_config = { + .demod_address = 0x55, + .dont_use_pll = 1, + .agc_callback = cx24113_agc_callback, +}; + +static const struct cx24113_config skystar2_rev2_8_cx24113_config = { + .i2c_addr = 0x54, + .xtal_khz = 10111, +}; + /* try to figure out the frontend, each card/box can have on of the following list */ int flexcop_frontend_init(struct flexcop_device *fc) { struct dvb_frontend_ops *ops; + struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap; + struct i2c_adapter *i2c_tuner; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[0].no_base_addr = 1; + fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c); + if (fc->fe != NULL) { + flexcop_ibi_value r108; + i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); + ops = &fc->fe->ops; + + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY_REV27; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[2].no_base_addr = 1; + if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL) + err("ISL6421 could NOT be attached"); + else + info("ISL6421 successfully attached"); + + /* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */ + r108.raw = 0x00000506; + fc->write_ibi_reg(fc, tw_sm_c_108, r108); + if (i2c_tuner) { + if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL) + err("ITD1000 could NOT be attached"); + else + info("ITD1000 successfully attached"); + } + goto fe_found; + } + fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */ + + /* try the sky v2.8 (cx24123, isl6421) */ + fc->fe = dvb_attach(cx24123_attach, + &skystar2_rev2_8_cx24123_config, i2c); + if (fc->fe != NULL) { + i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); + if (i2c_tuner != NULL) { + if (dvb_attach(cx24113_attach, fc->fe, + &skystar2_rev2_8_cx24113_config, + i2c_tuner) == NULL) + err("CX24113 could NOT be attached"); + else + info("CX24113 successfully attached"); + } + + fc->dev_type = FC_SKY_REV28; + + fc->fc_i2c_adap[2].no_base_addr = 1; + if (dvb_attach(isl6421_attach, fc->fe, + &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL) + err("ISL6421 could NOT be attached"); + else + info("ISL6421 successfully attached"); + + /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an + * IR-receiver (PIC16F818) - but the card has no input for + * that ??? */ + + goto fe_found; + } /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ - if ((fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { + fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); + if (fc->fe != NULL) { ops = &fc->fe->ops; ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; ops->set_voltage = flexcop_set_voltage; - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY; + goto fe_found; + } - fc->dev_type = FC_SKY; - info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); - } else /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ - if ((fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { - fc->dev_type = FC_AIR_DVB; + fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_DVB; fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; - info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); - } else + goto fe_found; + } + /* try the air atsc 2nd generation (nxt2002) */ - if ((fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC2; + fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_ATSC2; dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV); - info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); - } else - /* try the air atsc 3nd generation (lgdt3303) */ - if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC3; - dvb_attach(dvb_pll_attach, fc->fe, 0x61, &fc->i2c_adap, DVB_PLL_LG_TDVS_H06XF); - info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address); - } else + goto fe_found; + } + + fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_ATSC3; + dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, + TUNER_LG_TDVS_H06XF); + goto fe_found; + } + /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ - if ((fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC1; - info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); - } else + fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_ATSC1; + goto fe_found; + } + /* try the cable dvb (stv0297) */ - if ((fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_CABLE; + fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_CABLE; fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; - info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); - } else + goto fe_found; + } + /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ - if ((fc->fe = dvb_attach(vp310_mt312_attach, &skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { + fc->fe = dvb_attach(mt312_attach, + &skystar23_samsung_tbdu18132_config, i2c); + if (fc->fe != NULL) { ops = &fc->fe->ops; ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params; @@ -535,19 +650,21 @@ int flexcop_frontend_init(struct flexcop_device *fc) ops->sleep = flexcop_sleep; fc->dev_type = FC_SKY_OLD; - info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); + goto fe_found; } - if (fc->fe == NULL) { - err("no frontend driver found for this B2C2/FlexCop adapter"); - return -ENODEV; - } else { - if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { - err("frontend registration failed!"); - dvb_frontend_detach(fc->fe); - fc->fe = NULL; - return -EINVAL; - } + err("no frontend driver found for this B2C2/FlexCop adapter"); + return -ENODEV; + +fe_found: + info("found '%s' .", fc->fe->ops.info.name); + if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { + err("frontend registration failed!"); + ops = &fc->fe->ops; + if (ops->release != NULL) + ops->release(fc->fe); + fc->fe = NULL; + return -EINVAL; } fc->init_state |= FC_STATE_FE_INIT; return 0; diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index 6bf858a436c..55973eaf371 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -9,6 +9,8 @@ #define FC_MAX_I2C_RETRIES 100000 +/* #define DUMP_I2C_MESSAGES */ + static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100) { int i; @@ -38,30 +40,25 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r return -EREMOTEIO; } -static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, + flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ ret; - if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) { - /* The Cablestar needs a different kind of i2c-transfer (does not - * support "Repeat Start"): - * wait for the ACK failure, - * and do a subsequent read with the Bit 30 enabled - */ - r100.tw_sm_c_100.no_base_addr_ack_error = 1; - if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) { - deb_i2c("no_base_addr read failed. %d\n",ret); - return ret; - } + r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; + ret = flexcop_i2c_operation(i2c->fc, &r100); + if (ret != 0) { + deb_i2c("read failed. %d\n", ret); + return ret; } buf[0] = r100.tw_sm_c_100.data1_reg; if (len > 0) { - r104 = fc->read_ibi_reg(fc,tw_sm_c_104); - deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104); + deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw); /* there is at least one more byte, otherwise we wouldn't be here */ buf[1] = r104.tw_sm_c_104.data2_reg; @@ -85,17 +82,22 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; - deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw); /* write the additional i2c data before doing the actual i2c operation */ - fc->write_ibi_reg(fc,tw_sm_c_104,r104); - return flexcop_i2c_operation(fc,&r100); + fc->write_ibi_reg(fc, tw_sm_c_104, r104); + return flexcop_i2c_operation(fc, &r100); } -int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, - flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) { int ret; + +#ifdef DUMP_I2C_MESSAGES + int i; +#endif + u16 bytes_to_transfer; flexcop_ibi_value r100; @@ -103,7 +105,25 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, r100.raw = 0; r100.tw_sm_c_100.chipaddr = chipaddr; r100.tw_sm_c_100.twoWS_rw = op; - r100.tw_sm_c_100.twoWS_port_reg = port; + r100.tw_sm_c_100.twoWS_port_reg = i2c->port; + +#ifdef DUMP_I2C_MESSAGES + printk(KERN_DEBUG "%d ", i2c->port); + if (op == FC_READ) + printk("rd("); + else + printk("wr("); + + printk("%02x): %02x ", chipaddr, addr); +#endif + + /* in that case addr is the only value -> + * we write it twice as baseaddr and val0 + * BBTI is doing it like that for ISL6421 at least */ + if (i2c->no_base_addr && len == 0 && op == FC_WRITE) { + buf = &addr; + len = 1; + } while (len != 0) { bytes_to_transfer = len > 4 ? 4 : len; @@ -112,9 +132,14 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, r100.tw_sm_c_100.baseaddr = addr; if (op == FC_READ) - ret = flexcop_i2c_read4(fc, r100, buf); + ret = flexcop_i2c_read4(i2c, r100, buf); else - ret = flexcop_i2c_write4(fc,r100, buf); + ret = flexcop_i2c_write4(i2c->fc, r100, buf); + +#ifdef DUMP_I2C_MESSAGES + for (i = 0; i < bytes_to_transfer; i++) + printk("%02x ", buf[i]); +#endif if (ret < 0) return ret; @@ -122,7 +147,11 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, buf += bytes_to_transfer; addr += bytes_to_transfer; len -= bytes_to_transfer; - }; + } + +#ifdef DUMP_I2C_MESSAGES + printk("\n"); +#endif return 0; } @@ -132,7 +161,7 @@ EXPORT_SYMBOL(flexcop_i2c_request); /* master xfer callback for demodulator */ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) { - struct flexcop_device *fc = i2c_get_adapdata(i2c_adap); + struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); int i, ret = 0; /* Some drivers use 1 byte or 0 byte reads as probes, which this @@ -142,34 +171,29 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1) return 1; - if (mutex_lock_interruptible(&fc->i2c_mutex)) + if (mutex_lock_interruptible(&i2c->fc->i2c_mutex)) return -ERESTARTSYS; - /* reading */ - if (num == 2 && - msgs[0].flags == 0 && - msgs[1].flags == I2C_M_RD && - msgs[0].buf != NULL && - msgs[1].buf != NULL) { - - ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len); - - } else for (i = 0; i < num; i++) { /* writing command */ - if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) { - ret = -EINVAL; + for (i = 0; i < num; i++) { + /* reading */ + if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) { + ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr, + msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len); + i++; /* skip the following message */ + } else /* writing */ + ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr, + msgs[i].buf[0], &msgs[i].buf[1], + msgs[i].len - 1); + if (ret < 0) { + err("i2c master_xfer failed"); break; } - - ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); } - if (ret < 0) - err("i2c master_xfer failed"); - else - ret = num; - - mutex_unlock(&fc->i2c_mutex); + mutex_unlock(&i2c->fc->i2c_mutex); + if (ret == 0) + ret = num; return ret; } @@ -189,28 +213,68 @@ int flexcop_i2c_init(struct flexcop_device *fc) mutex_init(&fc->i2c_mutex); - memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter)); - strncpy(fc->i2c_adap.name, "B2C2 FlexCop device", - sizeof(fc->i2c_adap.name)); - - i2c_set_adapdata(&fc->i2c_adap,fc); + fc->fc_i2c_adap[0].fc = fc; + fc->fc_i2c_adap[1].fc = fc; + fc->fc_i2c_adap[2].fc = fc; + + fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD; + fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM; + fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER; + + strncpy(fc->fc_i2c_adap[0].i2c_adap.name, + "B2C2 FlexCop I2C to demod", I2C_NAME_SIZE); + strncpy(fc->fc_i2c_adap[1].i2c_adap.name, + "B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE); + strncpy(fc->fc_i2c_adap[2].i2c_adap.name, + "B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE); + + i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]); + i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]); + i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]); + + fc->fc_i2c_adap[0].i2c_adap.class = + fc->fc_i2c_adap[1].i2c_adap.class = + fc->fc_i2c_adap[2].i2c_adap.class = I2C_CLASS_TV_DIGITAL; + fc->fc_i2c_adap[0].i2c_adap.algo = + fc->fc_i2c_adap[1].i2c_adap.algo = + fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo; + fc->fc_i2c_adap[0].i2c_adap.algo_data = + fc->fc_i2c_adap[1].i2c_adap.algo_data = + fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL; + fc->fc_i2c_adap[0].i2c_adap.dev.parent = + fc->fc_i2c_adap[1].i2c_adap.dev.parent = + fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev; + + ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap); + if (ret < 0) + return ret; - fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL; - fc->i2c_adap.algo = &flexcop_algo; - fc->i2c_adap.algo_data = NULL; - fc->i2c_adap.dev.parent = fc->dev; + ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap); + if (ret < 0) + goto adap_1_failed; - if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0) - return ret; + ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap); + if (ret < 0) + goto adap_2_failed; fc->init_state |= FC_STATE_I2C_INIT; return 0; + +adap_2_failed: + i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); +adap_1_failed: + i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); + + return ret; } void flexcop_i2c_exit(struct flexcop_device *fc) { - if (fc->init_state & FC_STATE_I2C_INIT) - i2c_del_adapter(&fc->i2c_adap); + if (fc->init_state & FC_STATE_I2C_INIT) { + i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap); + i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); + i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); + } fc->init_state &= ~FC_STATE_I2C_INIT; } diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c index 167583bf062..93d20e56f90 100644 --- a/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -52,6 +52,8 @@ static const char *flexcop_device_names[] = { "Sky2PC/SkyStar 2 DVB-S (old version)", "Cable2PC/CableStar 2 DVB-C", "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", + "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", + "Sky2PC/SkyStar 2 DVB-S rev 2.8", }; static const char *flexcop_bus_names[] = { diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 01af4d237eb..5b30dfc7846 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -32,7 +32,7 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently jus #define deb_irq(args...) dprintk(0x08,args) #define deb_chk(args...) dprintk(0x10,args) -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS); diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h index 491f9bd6e19..7599fccc1a5 100644 --- a/drivers/media/dvb/b2c2/flexcop-reg.h +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -25,6 +25,8 @@ typedef enum { FC_SKY_OLD, FC_CABLE, FC_AIR_ATSC3, + FC_SKY_REV27, + FC_SKY_REV28, } flexcop_device_type_t; typedef enum { diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c index 01570ec8096..cda69528548 100644 --- a/drivers/media/dvb/b2c2/flexcop-sram.c +++ b/drivers/media/dvb/b2c2/flexcop-sram.c @@ -90,7 +90,7 @@ static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 * }; if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); + printk("%s: SRAM timeout\n", __func__); write_reg_dw(adapter, 0x700, command); @@ -115,7 +115,7 @@ static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, }; if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); + printk("%s: SRAM timeout\n", __func__); write_reg_dw(adapter, 0x700, command); @@ -127,7 +127,7 @@ static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, }; if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); + printk("%s: SRAM timeout\n", __func__); value = read_reg_dw(adapter, 0x700) >> 0x10; @@ -240,13 +240,13 @@ static void sram_init(struct adapter *adapter) adapter->dw_sram_type = tmp & 0x30000; - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); } else { adapter->dw_sram_type = 0x10000; - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); } /* return value is never used? */ @@ -257,7 +257,7 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) { u8 tmp1, tmp2; - dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr); + dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr); sram_set_size(adapter, mask); sram_init(adapter); @@ -275,7 +275,7 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) sram_read(adapter, addr, &tmp2, 1); sram_read(adapter, addr, &tmp2, 1); - dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2); + dprintk("%s: wrote 0xa5, read 0x%2x\n", __func__, tmp2); if (tmp2 != 0xa5) return 0; @@ -293,7 +293,7 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) sram_read(adapter, addr, &tmp2, 1); sram_read(adapter, addr, &tmp2, 1); - dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2); + dprintk("%s: wrote 0x5a, read 0x%2x\n", __func__, tmp2); if (tmp2 != 0x5a) return 0; @@ -340,7 +340,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) tmp3 = read_reg_dw(adapter, 0x71c); - dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3); + dprintk("%s: tmp3 = %x\n", __func__, tmp3); write_reg_dw(adapter, 0x71c, tmp2); @@ -351,7 +351,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 32K\n", __FUNCTION__); + dprintk("%s: sram size = 32K\n", __func__); return 32; } @@ -361,7 +361,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 128K\n", __FUNCTION__); + dprintk("%s: sram size = 128K\n", __func__); return 128; } @@ -371,7 +371,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 64K\n", __FUNCTION__); + dprintk("%s: sram size = 64K\n", __func__); return 64; } @@ -381,7 +381,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 32K\n", __FUNCTION__); + dprintk("%s: sram size = 32K\n", __func__); return 32; } @@ -390,7 +390,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__); + dprintk("%s: SRAM detection failed. Set to 32K \n", __func__); return 0; } diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 87fb75f0d1c..ae0d76a5d51 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -211,10 +211,11 @@ static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, #endif /* usb i2c stuff */ -static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb, +static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, - flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen) + u8 chipaddr, u8 addr, u8 *buf, u8 buflen) { + struct flexcop_usb *fc_usb = i2c->fc->bus_specific; u16 wValue, wIndex; int nWaitTime,pipe,len; // u8 dwRequestType; @@ -242,7 +243,7 @@ static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb, deb_info("unsupported function for i2c_req %x\n",func); return -EINVAL; } - wValue = (func << 8 ) | (port << 4); + wValue = (func << 8) | (i2c->port << 4); wIndex = (chipaddr << 8 ) | addr; deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req, @@ -274,13 +275,15 @@ static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_regi return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0); } -static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, - flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c, + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) { if (op == FC_READ) - return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len); + return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST, + USB_FUNC_I2C_READ, chipaddr, addr, buf, len); else - return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len); + return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST, + USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len); } static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, u8 *buffer, int buffer_length) @@ -376,7 +379,7 @@ static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) { - u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize; + u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; int buffer_offset = 0; diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 2ddafd071c9..5f79c8dc383 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -49,6 +49,8 @@ module_param_named(debug, b2c2_flexcop_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS); #undef DEBSTATUS +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* global zero for ibi values */ flexcop_ibi_value ibi_zero; @@ -66,8 +68,10 @@ static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) static int flexcop_dvb_init(struct flexcop_device *fc) { - int ret; - if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",fc->owner,fc->dev)) < 0) { + int ret = dvb_register_adapter(&fc->dvb_adapter, + "FlexCop Digital TV device", fc->owner, + fc->dev, adapter_nr); + if (ret < 0) { err("error registering DVB adapter"); return ret; } @@ -257,6 +261,12 @@ int flexcop_device_initialize(struct flexcop_device *fc) if ((ret = flexcop_dvb_init(fc))) goto error; + /* i2c has to be done before doing EEProm stuff - + * because the EEProm is accessed via i2c */ + ret = flexcop_i2c_init(fc); + if (ret) + goto error; + /* do the MAC address reading after initializing the dvb_adapter */ if (fc->get_mac_addr(fc, 0) == 0) { u8 *b = fc->dvb_adapter.proposed_mac; @@ -266,10 +276,6 @@ int flexcop_device_initialize(struct flexcop_device *fc) } else warn("reading of MAC address failed.\n"); - - if ((ret = flexcop_i2c_init(fc))) - goto error; - if ((ret = flexcop_frontend_init(fc))) goto error; diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig index ea666174e98..7588db1319d 100644 --- a/drivers/media/dvb/bt8xx/Kconfig +++ b/drivers/media/dvb/bt8xx/Kconfig @@ -1,14 +1,15 @@ config DVB_BT8XX tristate "BT8xx based PCI cards" depends on DVB_CORE && PCI && I2C && VIDEO_BT848 + depends on HOTPLUG # due to FW_LOADER select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_SP887X if !DVB_FE_CUSTOMISE select DVB_NXT6000 if !DVB_FE_CUSTOMISE select DVB_CX24110 if !DVB_FE_CUSTOMISE select DVB_OR51211 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select FW_LOADER help Support for PCI cards based on the Bt8xx PCI bridge. Examples are diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile index 84cf70504d1..d98f1d49ffa 100644 --- a/drivers/media/dvb/bt8xx/Makefile +++ b/drivers/media/dvb/bt8xx/Makefile @@ -1,3 +1,6 @@ obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o -EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video/bt8xx -Idrivers/media/dvb/frontends +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends +EXTRA_CFLAGS += -Idrivers/media/video/bt8xx +EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index 307ff35bdf1..a7637562e74 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -1290,7 +1290,7 @@ static int dst_get_signal(struct dst_state *state) { int retval; u8 get_signal[] = { 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfb }; - //dprintk("%s: Getting Signal strength and other parameters\n", __FUNCTION__); + //dprintk("%s: Getting Signal strength and other parameters\n", __func__); if ((state->diseq_flags & ATTEMPT_TUNE) == 0) { state->decode_lock = state->decode_strength = state->decode_snr = 0; return 0; @@ -1714,7 +1714,7 @@ static void dst_release(struct dvb_frontend *fe) struct dst_state *state = fe->demodulator_priv; if (state->dst_ca) { dvb_unregister_device(state->dst_ca); -#ifdef CONFIG_DVB_CORE_ATTACH +#ifdef CONFIG_MEDIA_ATTACH symbol_put(dst_ca_attach); #endif } diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c index 50bc32a8bd5..0258451423a 100644 --- a/drivers/media/dvb/bt8xx/dst_ca.c +++ b/drivers/media/dvb/bt8xx/dst_ca.c @@ -36,13 +36,13 @@ #define dprintk(x, y, z, format, arg...) do { \ if (z) { \ if ((x > DST_CA_ERROR) && (x > y)) \ - printk(KERN_ERR "%s: " format "\n", __FUNCTION__ , ##arg); \ + printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ else if ((x > DST_CA_NOTICE) && (x > y)) \ - printk(KERN_NOTICE "%s: " format "\n", __FUNCTION__ , ##arg); \ + printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ else if ((x > DST_CA_INFO) && (x > y)) \ - printk(KERN_INFO "%s: " format "\n", __FUNCTION__ , ##arg); \ + printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ else if ((x > DST_CA_DEBUG) && (x > y)) \ - printk(KERN_DEBUG "%s: " format "\n", __FUNCTION__ , ##arg); \ + printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ } else { \ if (x > y) \ printk(format, ## arg); \ @@ -162,7 +162,7 @@ static int ca_get_app_info(struct dst_state *state) dprintk(verbose, DST_CA_INFO, 1, " ================================ CI Module Application Info ======================================"); dprintk(verbose, DST_CA_INFO, 1, " Application Type=[%d], Application Vendor=[%d], Vendor Code=[%d]\n%s: Application info=[%s]", state->messages[7], (state->messages[8] << 8) | state->messages[9], - (state->messages[10] << 8) | state->messages[11], __FUNCTION__, (char *)(&state->messages[12])); + (state->messages[10] << 8) | state->messages[11], __func__, (char *)(&state->messages[12])); dprintk(verbose, DST_CA_INFO, 1, " =================================================================================================="); // Transform dst message to correct application_info message diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index dedd30a8356..6afbfbbef0c 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -40,10 +40,12 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define dprintk( args... ) \ - do \ + do { \ if (debug) printk(KERN_DEBUG args); \ - while (0) + } while (0) #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ @@ -609,8 +611,9 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) lgdt330x_reset(card); card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter); if (card->fe != NULL) { - dvb_attach(dvb_pll_attach, card->fe, 0x61, - card->i2c_adapter, DVB_PLL_LG_TDVS_H06XF); + dvb_attach(simple_tuner_attach, card->fe, + card->i2c_adapter, 0x61, + TUNER_LG_TDVS_H06XF); dprintk ("dvb_bt8xx: lgdt330x detected\n"); } break; @@ -670,7 +673,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) state->dst_ca = NULL; /* DST is not a frontend, attaching the ASIC */ if (dvb_attach(dst_attach, state, &card->dvb_adapter) == NULL) { - printk("%s: Could not find a Twinhan DST.\n", __FUNCTION__); + printk("%s: Could not find a Twinhan DST.\n", __func__); break; } /* Attach other DST peripherals if any */ @@ -692,8 +695,9 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) case BTTV_BOARD_PC_HDTV: card->fe = dvb_attach(or51211_attach, &or51211_config, card->i2c_adapter); if (card->fe != NULL) - dvb_attach(dvb_pll_attach, card->fe, 0x61, - card->i2c_adapter, DVB_PLL_FCV1236D); + dvb_attach(simple_tuner_attach, card->fe, + card->i2c_adapter, 0x61, + TUNER_PHILIPS_FCV1236D); break; } @@ -715,7 +719,10 @@ static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) { int result; - if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name, THIS_MODULE, &card->bt->dev->dev)) < 0) { + result = dvb_register_adapter(&card->dvb_adapter, card->card_name, + THIS_MODULE, &card->bt->dev->dev, + adapter_nr); + if (result < 0) { printk("dvb_bt8xx: dvb_register_adapter failed (errno = %d)\n", result); return result; } diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h index 436880e6867..4499ed2ac0e 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.h @@ -38,7 +38,7 @@ #include "or51211.h" #include "lgdt330x.h" #include "zl10353.h" -#include "dvb-pll.h" +#include "tuner-simple.h" struct dvb_bt8xx_card { struct mutex lock; diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig index 3d778c5aba6..c03513b2cca 100644 --- a/drivers/media/dvb/cinergyT2/Kconfig +++ b/drivers/media/dvb/cinergyT2/Kconfig @@ -1,6 +1,6 @@ config DVB_CINERGYT2 tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT help Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index db08b0a8888..a824f3719f8 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -58,11 +58,13 @@ static int debug; module_param_named(debug, debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define dprintk(level, args...) \ do { \ if ((debug & level)) { \ printk("%s: %s(): ", KBUILD_MODNAME, \ - __FUNCTION__); \ + __func__); \ printk(args); } \ } while (0) @@ -80,22 +82,22 @@ enum cinergyt2_ep1_cmd { struct dvbt_set_parameters_msg { uint8_t cmd; - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; } __attribute__((packed)); struct dvbt_get_status_msg { - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; - uint16_t gain; + __le16 gain; uint8_t snr; - uint32_t viterbi_error_rate; - uint32_t rs_error_rate; - uint32_t uncorrected_block_count; + __le32 viterbi_error_rate; + __le32 rs_error_rate; + __le32 uncorrected_block_count; uint8_t lock_bits; uint8_t prev_lock_bits; } __attribute__((packed)); @@ -134,6 +136,7 @@ struct cinergyt2 { wait_queue_head_t poll_wq; int pending_fe_events; int disconnect_pending; + unsigned int uncorrected_block_count; atomic_t inuse; void *streambuf; @@ -145,7 +148,7 @@ struct cinergyt2 { char phys[64]; struct delayed_work rc_query_work; int rc_input_event; - u32 rc_last_code; + __le32 rc_last_code; unsigned long last_event_jiffies; #endif }; @@ -158,7 +161,7 @@ enum { struct cinergyt2_rc_event { char type; - uint32_t value; + __le32 value; } __attribute__((packed)); static const uint32_t rc_keys[] = { @@ -617,8 +620,11 @@ static int cinergyt2_ioctl (struct inode *inode, struct file *file, { uint32_t unc_count; - unc_count = stat->uncorrected_block_count; - stat->uncorrected_block_count = 0; + if (mutex_lock_interruptible(&cinergyt2->sem)) + return -ERESTARTSYS; + unc_count = cinergyt2->uncorrected_block_count; + cinergyt2->uncorrected_block_count = 0; + mutex_unlock(&cinergyt2->sem); /* UNC are already converted to host byte order... */ return put_user(unc_count,(__u32 __user *) arg); @@ -767,7 +773,7 @@ static void cinergyt2_query_rc (struct work_struct *work) input_sync(cinergyt2->rc_input_dev); cinergyt2->rc_input_event = KEY_MAX; } - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); } goto out; } @@ -778,7 +784,7 @@ static void cinergyt2_query_rc (struct work_struct *work) n, le32_to_cpu(rc_events[n].value), rc_events[n].type); if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && - rc_events[n].value == ~0) { + rc_events[n].value == cpu_to_le32(~0)) { /* keyrepeat bit -> just repeat last rc_input_event */ } else { cinergyt2->rc_input_event = KEY_MAX; @@ -793,7 +799,7 @@ static void cinergyt2_query_rc (struct work_struct *work) if (cinergyt2->rc_input_event != KEY_MAX) { if (rc_events[n].value == cinergyt2->rc_last_code && - cinergyt2->rc_last_code != ~0) { + cinergyt2->rc_last_code != cpu_to_le32(~0)) { /* emit a key-up so the double event is recognized */ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); input_report_key(cinergyt2->rc_input_dev, @@ -827,7 +833,7 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc); input_dev->name = DRIVER_NAME " remote control"; @@ -838,8 +844,8 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) input_dev->keycodesize = 0; input_dev->keycodemax = 0; input_dev->id.bustype = BUS_USB; - input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor; - input_dev->id.product = cinergyt2->udev->descriptor.idProduct; + input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor); + input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct); input_dev->id.version = 1; input_dev->dev.parent = &cinergyt2->udev->dev; @@ -887,18 +893,16 @@ static void cinergyt2_query (struct work_struct *work) char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS }; struct dvbt_get_status_msg *s = &cinergyt2->status; uint8_t lock_bits; - uint32_t unc; if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) return; - unc = s->uncorrected_block_count; lock_bits = s->lock_bits; cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s)); - unc += le32_to_cpu(s->uncorrected_block_count); - s->uncorrected_block_count = unc; + cinergyt2->uncorrected_block_count += + le32_to_cpu(s->uncorrected_block_count); if (lock_bits != s->lock_bits) { wake_up_interruptible(&cinergyt2->poll_wq); @@ -938,7 +942,10 @@ static int cinergyt2_probe (struct usb_interface *intf, return -ENOMEM; } - if ((err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE, &cinergyt2->udev->dev)) < 0) { + err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, + THIS_MODULE, &cinergyt2->udev->dev, + adapter_nr); + if (err < 0) { kfree(cinergyt2); return err; } diff --git a/drivers/media/dvb/dvb-core/Kconfig b/drivers/media/dvb/dvb-core/Kconfig deleted file mode 100644 index e3e6839f807..00000000000 --- a/drivers/media/dvb/dvb-core/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -config DVB_CORE - tristate "DVB for Linux" - depends on NET && INET - select CRC32 - help - Support Digital Video Broadcasting hardware. Enable this if you - own a DVB adapter and want to use it or if you compile Linux for - a digital SetTopBox. - - DVB core utility functions for device handling, software fallbacks etc. - Say Y when you have a DVB card and want to use it. Say Y if your want - to build your drivers outside the kernel, but need the DVB core. All - in-kernel drivers will select this automatically if needed. - - API specs and user tools are available from <http://www.linuxtv.org/>. - - Please report problems regarding this driver to the LinuxDVB - mailing list. - - If unsure say N. - -config DVB_CORE_ATTACH - bool "Load and attach frontend modules as needed" - depends on DVB_CORE - depends on MODULES - help - Remove the static dependency of DVB card drivers on all - frontend modules for all possible card variants. Instead, - allow the card drivers to only load the frontend modules - they require. This saves several KBytes of memory. - - Note: You will need module-init-tools v3.2 or later for this feature. - - If unsure say Y. diff --git a/drivers/media/dvb/dvb-core/demux.h b/drivers/media/dvb/dvb-core/demux.h index 0c1d87c5227..b0d347daae4 100644 --- a/drivers/media/dvb/dvb-core/demux.h +++ b/drivers/media/dvb/dvb-core/demux.h @@ -80,6 +80,8 @@ enum dmx_success { #define TS_PAYLOAD_ONLY 2 /* in case TS_PACKET is set, only send the TS payload (<=184 bytes per packet) to callback */ #define TS_DECODER 4 /* send stream to built-in decoder (if present) */ +#define TS_DEMUX 8 /* in case TS_PACKET is set, send the TS to + the demux device, not to the dvr device */ /* PES type for filters which write to built-in decoder */ /* these should be kept identical to the types in dmx.h */ diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index f94bc31e3b3..df5bef6a251 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -126,7 +126,7 @@ static int dvb_dvr_open(struct inode *inode, struct file *file) struct dmxdev *dmxdev = dvbdev->priv; struct dmx_frontend *front; - dprintk("function : %s\n", __FUNCTION__); + dprintk("function : %s\n", __func__); if (mutex_lock_interruptible(&dmxdev->mutex)) return -ERESTARTSYS; @@ -259,6 +259,39 @@ static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count, return ret; } +static int dvb_dvr_set_buffer_size(struct dmxdev *dmxdev, + unsigned long size) +{ + struct dvb_ringbuffer *buf = &dmxdev->dvr_buffer; + void *newmem; + void *oldmem; + + dprintk("function : %s\n", __func__); + + if (buf->size == size) + return 0; + if (!size) + return -EINVAL; + + newmem = vmalloc(size); + if (!newmem) + return -ENOMEM; + + oldmem = buf->data; + + spin_lock_irq(&dmxdev->lock); + buf->data = newmem; + buf->size = size; + + /* reset and not flush in case the buffer shrinks */ + dvb_ringbuffer_reset(buf); + spin_unlock_irq(&dmxdev->lock); + + vfree(oldmem); + + return 0; +} + static inline void dvb_dmxdev_filter_state_set(struct dmxdev_filter *dmxdevfilter, int state) { @@ -271,28 +304,32 @@ static int dvb_dmxdev_set_buffer_size(struct dmxdev_filter *dmxdevfilter, unsigned long size) { struct dvb_ringbuffer *buf = &dmxdevfilter->buffer; - void *mem; + void *newmem; + void *oldmem; if (buf->size == size) return 0; + if (!size) + return -EINVAL; if (dmxdevfilter->state >= DMXDEV_STATE_GO) return -EBUSY; + + newmem = vmalloc(size); + if (!newmem) + return -ENOMEM; + + oldmem = buf->data; + spin_lock_irq(&dmxdevfilter->dev->lock); - mem = buf->data; - buf->data = NULL; + buf->data = newmem; buf->size = size; - dvb_ringbuffer_flush(buf); + + /* reset and not flush in case the buffer shrinks */ + dvb_ringbuffer_reset(buf); spin_unlock_irq(&dmxdevfilter->dev->lock); - vfree(mem); - if (buf->size) { - mem = vmalloc(dmxdevfilter->buffer.size); - if (!mem) - return -ENOMEM; - spin_lock_irq(&dmxdevfilter->dev->lock); - buf->data = mem; - spin_unlock_irq(&dmxdevfilter->dev->lock); - } + vfree(oldmem); + return 0; } @@ -374,7 +411,8 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, return 0; } - if (dmxdevfilter->params.pes.output == DMX_OUT_TAP) + if (dmxdevfilter->params.pes.output == DMX_OUT_TAP + || dmxdevfilter->params.pes.output == DMX_OUT_TSDEMUX_TAP) buffer = &dmxdevfilter->buffer; else buffer = &dmxdevfilter->dev->dvr_buffer; @@ -550,7 +588,7 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) dvb_dmxdev_section_callback); if (ret < 0) { printk("DVB (%s): could not alloc feed\n", - __FUNCTION__); + __func__); return ret; } @@ -558,7 +596,7 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) (para->flags & DMX_CHECK_CRC) ? 1 : 0); if (ret < 0) { printk("DVB (%s): could not set feed\n", - __FUNCTION__); + __func__); dvb_dmxdev_feed_restart(filter); return ret; } @@ -620,9 +658,10 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) if (otype == DMX_OUT_TS_TAP) ts_type |= TS_PACKET; - - if (otype == DMX_OUT_TAP) - ts_type |= TS_PAYLOAD_ONLY | TS_PACKET; + else if (otype == DMX_OUT_TSDEMUX_TAP) + ts_type |= TS_PACKET | TS_DEMUX; + else if (otype == DMX_OUT_TAP) + ts_type |= TS_PACKET | TS_DEMUX | TS_PAYLOAD_ONLY; ret = dmxdev->demux->allocate_ts_feed(dmxdev->demux, tsfeed, @@ -732,7 +771,7 @@ static int dvb_dmxdev_filter_set(struct dmxdev *dmxdev, struct dmxdev_filter *dmxdevfilter, struct dmx_sct_filter_params *params) { - dprintk("function : %s\n", __FUNCTION__); + dprintk("function : %s\n", __func__); dvb_dmxdev_filter_stop(dmxdevfilter); @@ -1007,6 +1046,7 @@ static int dvb_dvr_do_ioctl(struct inode *inode, struct file *file, { struct dvb_device *dvbdev = file->private_data; struct dmxdev *dmxdev = dvbdev->priv; + unsigned long arg = (unsigned long)parg; int ret; if (mutex_lock_interruptible(&dmxdev->mutex)) @@ -1014,8 +1054,7 @@ static int dvb_dvr_do_ioctl(struct inode *inode, struct file *file, switch (cmd) { case DMX_SET_BUFFER_SIZE: - // FIXME: implement - ret = 0; + ret = dvb_dvr_set_buffer_size(dmxdev, arg); break; default: @@ -1038,7 +1077,7 @@ static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait) struct dmxdev *dmxdev = dvbdev->priv; unsigned int mask = 0; - dprintk("function : %s\n", __FUNCTION__); + dprintk("function : %s\n", __func__); poll_wait(file, &dmxdev->dvr_buffer.queue, wait); diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c index 89437fdab8b..588fbe105c2 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c @@ -250,7 +250,7 @@ static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, unsigned long timeout; unsigned long start; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* loop until timeout elapsed */ start = jiffies; @@ -263,7 +263,7 @@ static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, /* if we got the flags, it was successful! */ if (res & waitfor) { - dprintk("%s succeeded timeout:%lu\n", __FUNCTION__, jiffies - start); + dprintk("%s succeeded timeout:%lu\n", __func__, jiffies - start); return 0; } @@ -276,7 +276,7 @@ static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, msleep(1); } - dprintk("%s failed timeout:%lu\n", __FUNCTION__, jiffies - start); + dprintk("%s failed timeout:%lu\n", __func__, jiffies - start); /* if we get here, we've timed out */ return -ETIMEDOUT; @@ -297,7 +297,7 @@ static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot) int buf_size; u8 buf[2]; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* we'll be determining these during this function */ ca->slot_info[slot].da_irq_supported = 0; @@ -549,7 +549,7 @@ static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot) { int configoption; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* set the config option */ ca->pub->write_attribute_mem(ca->pub, slot, @@ -587,7 +587,7 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * eb u8 buf[HOST_LINK_BUF_SIZE]; int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* check if we have space for a link buf in the rx_buffer */ if (ebuf == NULL) { @@ -708,7 +708,7 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b int status; int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); // sanity check @@ -785,7 +785,7 @@ EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq); */ static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); ca->pub->slot_shutdown(ca->pub, slot); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; @@ -892,7 +892,7 @@ void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot) static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); ca->wakeup = 1; mb(); @@ -910,15 +910,21 @@ static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca) int curdelay = 100000000; int slot; + /* Beware of too high polling frequency, because one polling + * call might take several hundred milliseconds until timeout! + */ for (slot = 0; slot < ca->slot_count; slot++) { switch (ca->slot_info[slot].slot_state) { default: case DVB_CA_SLOTSTATE_NONE: + delay = HZ * 60; /* 60s */ + if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) + delay = HZ * 5; /* 5s */ + break; case DVB_CA_SLOTSTATE_INVALID: - delay = HZ * 60; - if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) { - delay = HZ / 10; - } + delay = HZ * 60; /* 60s */ + if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) + delay = HZ / 10; /* 100ms */ break; case DVB_CA_SLOTSTATE_UNINITIALISED: @@ -926,19 +932,17 @@ static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca) case DVB_CA_SLOTSTATE_VALIDATE: case DVB_CA_SLOTSTATE_WAITFR: case DVB_CA_SLOTSTATE_LINKINIT: - delay = HZ / 10; + delay = HZ / 10; /* 100ms */ break; case DVB_CA_SLOTSTATE_RUNNING: - delay = HZ * 60; - if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) { - delay = HZ / 10; - } + delay = HZ * 60; /* 60s */ + if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) + delay = HZ / 10; /* 100ms */ if (ca->open) { if ((!ca->slot_info[slot].da_irq_supported) || - (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) { - delay = HZ / 10; - } + (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) + delay = HZ / 10; /* 100ms */ } break; } @@ -964,7 +968,7 @@ static int dvb_ca_en50221_thread(void *data) int pktcount; void *rxbuf; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* choose the correct initial delay */ dvb_ca_en50221_thread_update_delay(ca); @@ -1172,7 +1176,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, int err = 0; int slot; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); switch (cmd) { case CA_RESET: @@ -1266,7 +1270,7 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file, unsigned long timeout; int written; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* Incoming packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ if (count < 2) @@ -1401,7 +1405,7 @@ static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf, int pktlen; int dispose = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* Outgoing packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ if (count < 2) @@ -1490,7 +1494,7 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file) int err; int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (!try_module_get(ca->pub->owner)) return -EIO; @@ -1534,7 +1538,7 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file) struct dvb_ca_private *ca = dvbdev->priv; int err; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* mark the CA device as closed */ ca->open = 0; @@ -1564,7 +1568,7 @@ static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait) int slot; int result = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) { mask |= POLLIN; @@ -1626,7 +1630,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, struct dvb_ca_private *ca = NULL; int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (slot_count < 1) return -EINVAL; @@ -1704,7 +1708,7 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca) struct dvb_ca_private *ca = pubca->private; int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* shutdown the thread if there was one */ kthread_stop(ca->thread); diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index 7959020f931..934e15fffc5 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -368,7 +368,7 @@ static inline void dvb_dmx_swfilter_packet_type(struct dvb_demux_feed *feed, #define DVR_FEED(f) \ (((f)->type == DMX_TYPE_TS) && \ ((f)->feed.ts.is_filtering) && \ - (((f)->ts_type & (TS_PACKET|TS_PAYLOAD_ONLY)) == TS_PACKET)) + (((f)->ts_type & (TS_PACKET | TS_DEMUX)) == TS_PACKET)) static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) { @@ -553,7 +553,7 @@ static void dvb_demux_feed_add(struct dvb_demux_feed *feed) spin_lock_irq(&feed->demux->lock); if (dvb_demux_feed_find(feed)) { printk(KERN_ERR "%s: feed already in list (type=%x state=%x pid=%x)\n", - __FUNCTION__, feed->type, feed->state, feed->pid); + __func__, feed->type, feed->state, feed->pid); goto out; } @@ -567,7 +567,7 @@ static void dvb_demux_feed_del(struct dvb_demux_feed *feed) spin_lock_irq(&feed->demux->lock); if (!(dvb_demux_feed_find(feed))) { printk(KERN_ERR "%s: feed not in list (type=%x state=%x pid=%x)\n", - __FUNCTION__, feed->type, feed->state, feed->pid); + __func__, feed->type, feed->state, feed->pid); goto out; } diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 925cfa6221a..8cbdb218952 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -135,7 +135,7 @@ static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) struct dvb_frontend_event *e; int wp; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (mutex_lock_interruptible (&events->mtx)) return; @@ -171,7 +171,7 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe, struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_fe_events *events = &fepriv->events; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (events->overflow) { events->overflow = 0; @@ -237,7 +237,7 @@ static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepr { int q2; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (locked) (fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256; @@ -329,7 +329,7 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra dprintk("%s: drift:%i inversion:%i auto_step:%i " "auto_sub_step:%i started_auto_step:%i\n", - __FUNCTION__, fepriv->lnb_drift, fepriv->inversion, + __func__, fepriv->lnb_drift, fepriv->inversion, fepriv->auto_step, fepriv->auto_sub_step, fepriv->started_auto_step); /* set the frontend itself */ @@ -511,7 +511,7 @@ static int dvb_frontend_thread(void *data) fe_status_t s; struct dvb_frontend_parameters *params; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); fepriv->check_wrapped = 0; fepriv->quality = 0; @@ -597,7 +597,7 @@ static void dvb_frontend_stop(struct dvb_frontend *fe) { struct dvb_frontend_private *fepriv = fe->frontend_priv; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); fepriv->exit = 1; mb(); @@ -665,7 +665,7 @@ static int dvb_frontend_start(struct dvb_frontend *fe) struct dvb_frontend_private *fepriv = fe->frontend_priv; struct task_struct *fe_thread; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (fepriv->thread) { if (!fepriv->exit) @@ -763,7 +763,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, struct dvb_frontend_private *fepriv = fe->frontend_priv; int err = -EOPNOTSUPP; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (fepriv->exit) return -ENODEV; @@ -895,7 +895,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, int i; u8 last = 1; if (dvb_frontend_debug) - printk("%s switch command: 0x%04lx\n", __FUNCTION__, cmd); + printk("%s switch command: 0x%04lx\n", __func__, cmd); do_gettimeofday(&nexttime); if (dvb_frontend_debug) memcpy(&tv[0], &nexttime, sizeof(struct timeval)); @@ -919,7 +919,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, } if (dvb_frontend_debug) { printk("%s(%d): switch delay (should be 32k followed by all 8k\n", - __FUNCTION__, fe->dvb->num); + __func__, fe->dvb->num); for (i = 1; i < 10; i++) printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); } @@ -1037,7 +1037,7 @@ static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struc struct dvb_frontend *fe = dvbdev->priv; struct dvb_frontend_private *fepriv = fe->frontend_priv; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); poll_wait (file, &fepriv->events.wait_queue, wait); @@ -1054,7 +1054,7 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) struct dvb_frontend_private *fepriv = fe->frontend_priv; int ret; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) @@ -1095,7 +1095,7 @@ static int dvb_frontend_release(struct inode *inode, struct file *file) struct dvb_frontend_private *fepriv = fe->frontend_priv; int ret; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if ((file->f_flags & O_ACCMODE) != O_RDONLY) fepriv->release_jiffies = jiffies; @@ -1135,7 +1135,7 @@ int dvb_register_frontend(struct dvb_adapter* dvb, .kernel_ioctl = dvb_frontend_ioctl }; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (mutex_lock_interruptible(&frontend_mutex)) return -ERESTARTSYS; @@ -1169,7 +1169,7 @@ EXPORT_SYMBOL(dvb_register_frontend); int dvb_unregister_frontend(struct dvb_frontend* fe) { struct dvb_frontend_private *fepriv = fe->frontend_priv; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); mutex_lock(&frontend_mutex); dvb_frontend_stop (fe); @@ -1189,7 +1189,7 @@ int dvb_unregister_frontend(struct dvb_frontend* fe) } EXPORT_SYMBOL(dvb_unregister_frontend); -#ifdef CONFIG_DVB_CORE_ATTACH +#ifdef CONFIG_MEDIA_ATTACH void dvb_frontend_detach(struct dvb_frontend* fe) { void *ptr; diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index ed3f8268ed1..c2334aef414 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -168,7 +168,7 @@ struct dvb_net_priv { * stolen from eth.c out of the linux kernel, hacked for dvb-device * by Michael Holzt <kju@debian.org> */ -static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb, +static __be16 dvb_net_eth_type_trans(struct sk_buff *skb, struct net_device *dev) { struct ethhdr *eth; @@ -277,10 +277,10 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if(ext_len >= 0) { p->ule_next_hdr += ext_len; if (!p->ule_bridged) { - p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr); + p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr); p->ule_next_hdr += 2; } else { - p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); + p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); /* This assures the extension handling loop will terminate. */ } } @@ -294,7 +294,7 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if (ule_optional_ext_handlers[htype]) (void)ule_optional_ext_handlers[htype]( p ); p->ule_next_hdr += ext_len; - p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) ); + p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) ); /* * note: the length of the next header type is included in the * length of THIS optional extension header @@ -354,7 +354,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) #ifdef ULE_DEBUG /* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */ static unsigned char ule_hist[100*TS_SZ]; - static unsigned char *ule_where = ule_hist, ule_dump = 0; + static unsigned char *ule_where = ule_hist, ule_dump; #endif /* For all TS cells in current buffer. @@ -594,8 +594,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Check for complete payload. */ if (priv->ule_sndu_remain <= 0) { /* Check CRC32, we've got it in our skb already. */ - unsigned short ulen = htons(priv->ule_sndu_len); - unsigned short utype = htons(priv->ule_sndu_type); + __be16 ulen = htons(priv->ule_sndu_len); + __be16 utype = htons(priv->ule_sndu_type); const u8 *tail; struct kvec iov[3] = { { &ulen, sizeof ulen }, @@ -784,8 +784,8 @@ static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len, { struct net_device *dev = feed->priv; - if (buffer2 != 0) - printk(KERN_WARNING "buffer2 not 0: %p.\n", buffer2); + if (buffer2) + printk(KERN_WARNING "buffer2 not NULL: %p.\n", buffer2); if (buffer1_len > 32768) printk(KERN_WARNING "length > 32k: %zu.\n", buffer1_len); /* printk("TS callback: %u bytes, %u TS cells @ %p.\n", @@ -965,17 +965,17 @@ static int dvb_net_feed_start(struct net_device *dev) struct dmx_demux *demux = priv->demux; unsigned char *mac = (unsigned char *) dev->dev_addr; - dprintk("%s: rx_mode %i\n", __FUNCTION__, priv->rx_mode); + dprintk("%s: rx_mode %i\n", __func__, priv->rx_mode); mutex_lock(&priv->mutex); if (priv->tsfeed || priv->secfeed || priv->secfilter || priv->multi_secfilter[0]) - printk("%s: BUG %d\n", __FUNCTION__, __LINE__); + printk("%s: BUG %d\n", __func__, __LINE__); priv->secfeed=NULL; priv->secfilter=NULL; priv->tsfeed = NULL; if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) { - dprintk("%s: alloc secfeed\n", __FUNCTION__); + dprintk("%s: alloc secfeed\n", __func__); ret=demux->allocate_section_feed(demux, &priv->secfeed, dvb_net_sec_callback); if (ret<0) { @@ -993,38 +993,38 @@ static int dvb_net_feed_start(struct net_device *dev) } if (priv->rx_mode != RX_MODE_PROMISC) { - dprintk("%s: set secfilter\n", __FUNCTION__); + dprintk("%s: set secfilter\n", __func__); dvb_net_filter_sec_set(dev, &priv->secfilter, mac, mask_normal); } switch (priv->rx_mode) { case RX_MODE_MULTI: for (i = 0; i < priv->multi_num; i++) { - dprintk("%s: set multi_secfilter[%d]\n", __FUNCTION__, i); + dprintk("%s: set multi_secfilter[%d]\n", __func__, i); dvb_net_filter_sec_set(dev, &priv->multi_secfilter[i], priv->multi_macs[i], mask_normal); } break; case RX_MODE_ALL_MULTI: priv->multi_num=1; - dprintk("%s: set multi_secfilter[0]\n", __FUNCTION__); + dprintk("%s: set multi_secfilter[0]\n", __func__); dvb_net_filter_sec_set(dev, &priv->multi_secfilter[0], mac_allmulti, mask_allmulti); break; case RX_MODE_PROMISC: priv->multi_num=0; - dprintk("%s: set secfilter\n", __FUNCTION__); + dprintk("%s: set secfilter\n", __func__); dvb_net_filter_sec_set(dev, &priv->secfilter, mac, mask_promisc); break; } - dprintk("%s: start filtering\n", __FUNCTION__); + dprintk("%s: start filtering\n", __func__); priv->secfeed->start_filtering(priv->secfeed); } else if (priv->feedtype == DVB_NET_FEEDTYPE_ULE) { struct timespec timeout = { 0, 10000000 }; // 10 msec /* we have payloads encapsulated in TS */ - dprintk("%s: alloc tsfeed\n", __FUNCTION__); + dprintk("%s: alloc tsfeed\n", __func__); ret = demux->allocate_ts_feed(demux, &priv->tsfeed, dvb_net_ts_callback); if (ret < 0) { printk("%s: could not allocate ts feed\n", dev->name); @@ -1048,7 +1048,7 @@ static int dvb_net_feed_start(struct net_device *dev) goto error; } - dprintk("%s: start filtering\n", __FUNCTION__); + dprintk("%s: start filtering\n", __func__); priv->tsfeed->start_filtering(priv->tsfeed); } else ret = -EINVAL; @@ -1063,17 +1063,17 @@ static int dvb_net_feed_stop(struct net_device *dev) struct dvb_net_priv *priv = dev->priv; int i, ret = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); mutex_lock(&priv->mutex); if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) { if (priv->secfeed) { if (priv->secfeed->is_filtering) { - dprintk("%s: stop secfeed\n", __FUNCTION__); + dprintk("%s: stop secfeed\n", __func__); priv->secfeed->stop_filtering(priv->secfeed); } if (priv->secfilter) { - dprintk("%s: release secfilter\n", __FUNCTION__); + dprintk("%s: release secfilter\n", __func__); priv->secfeed->release_filter(priv->secfeed, priv->secfilter); priv->secfilter=NULL; @@ -1082,7 +1082,7 @@ static int dvb_net_feed_stop(struct net_device *dev) for (i=0; i<priv->multi_num; i++) { if (priv->multi_secfilter[i]) { dprintk("%s: release multi_filter[%d]\n", - __FUNCTION__, i); + __func__, i); priv->secfeed->release_filter(priv->secfeed, priv->multi_secfilter[i]); priv->multi_secfilter[i] = NULL; @@ -1096,7 +1096,7 @@ static int dvb_net_feed_stop(struct net_device *dev) } else if (priv->feedtype == DVB_NET_FEEDTYPE_ULE) { if (priv->tsfeed) { if (priv->tsfeed->is_filtering) { - dprintk("%s: stop tsfeed\n", __FUNCTION__); + dprintk("%s: stop tsfeed\n", __func__); priv->tsfeed->stop_filtering(priv->tsfeed); } priv->demux->release_ts_feed(priv->demux, priv->tsfeed); diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c index ac9d93cf83c..872985b7912 100644 --- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c +++ b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c @@ -90,7 +90,11 @@ void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf) rbuf->error = 0; } - +void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf) +{ + rbuf->pread = rbuf->pwrite = 0; + rbuf->error = 0; +} void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf) { diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.h b/drivers/media/dvb/dvb-core/dvb_ringbuffer.h index d97714e7573..89082626296 100644 --- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.h +++ b/drivers/media/dvb/dvb-core/dvb_ringbuffer.h @@ -69,6 +69,7 @@ struct dvb_ringbuffer { ** to lock read or write operations. ** Two or more readers must be locked against each other. ** Flushing the buffer counts as a read operation. +** Resetting the buffer counts as a read and write operation. ** Two or more writers must be locked against each other. */ @@ -85,6 +86,13 @@ extern ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf); extern ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf); +/* +** Reset the read and write pointers to zero and flush the buffer +** This counts as a read and write operation +*/ +extern void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf); + + /* read routines & macros */ /* ---------------------- */ /* flush buffer */ diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 18738faecbb..8b56d929f7f 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -49,7 +49,6 @@ static const char * const dnames[] = { "net", "osd" }; -#define DVB_MAX_ADAPTERS 8 #define DVB_MAX_IDS 4 #define nums2minor(num,type,id) ((num << 6) | (id << 4) | type) #define MAX_DVB_MINORS (DVB_MAX_ADAPTERS*64) @@ -97,7 +96,7 @@ static int dvb_device_open(struct inode *inode, struct file *file) } -static struct file_operations dvb_device_fops = +static const struct file_operations dvb_device_fops = { .owner = THIS_MODULE, .open = dvb_device_open, @@ -196,7 +195,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, if ((id = dvbdev_get_free_id (adap, type)) < 0){ mutex_unlock(&dvbdev_register_lock); *pdvbdev = NULL; - printk(KERN_ERR "%s: couldn't find free device id\n", __FUNCTION__); + printk(KERN_ERR "%s: couldn't find free device id\n", __func__); return -ENFILE; } @@ -235,7 +234,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, "dvb%d.%s%d", adap->num, dnames[type], id); if (IS_ERR(clsdev)) { printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n", - __FUNCTION__, adap->num, dnames[type], id, PTR_ERR(clsdev)); + __func__, adap->num, dnames[type], id, PTR_ERR(clsdev)); return PTR_ERR(clsdev); } @@ -262,18 +261,25 @@ void dvb_unregister_device(struct dvb_device *dvbdev) } EXPORT_SYMBOL(dvb_unregister_device); +static int dvbdev_check_free_adapter_num(int num) +{ + struct list_head *entry; + list_for_each(entry, &dvb_adapter_list) { + struct dvb_adapter *adap; + adap = list_entry(entry, struct dvb_adapter, list_head); + if (adap->num == num) + return 0; + } + return 1; +} static int dvbdev_get_free_adapter_num (void) { int num = 0; while (num < DVB_MAX_ADAPTERS) { - struct dvb_adapter *adap; - list_for_each_entry(adap, &dvb_adapter_list, list_head) - if (adap->num == num) - goto skip; - return num; -skip: + if (dvbdev_check_free_adapter_num(num)) + return num; num++; } @@ -281,13 +287,28 @@ skip: } -int dvb_register_adapter(struct dvb_adapter *adap, const char *name, struct module *module, struct device *device) +int dvb_register_adapter(struct dvb_adapter *adap, const char *name, + struct module *module, struct device *device, + short *adapter_nums) { - int num; + int i, num; mutex_lock(&dvbdev_register_lock); - if ((num = dvbdev_get_free_adapter_num ()) < 0) { + for (i = 0; i < DVB_MAX_ADAPTERS; ++i) { + num = adapter_nums[i]; + if (num >= 0 && num < DVB_MAX_ADAPTERS) { + /* use the one the driver asked for */ + if (dvbdev_check_free_adapter_num(num)) + break; + } else { + num = dvbdev_get_free_adapter_num(); + break; + } + num = -1; + } + + if (num < 0) { mutex_unlock(&dvbdev_register_lock); return -ENFILE; } diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h index 6dff10ebf47..89d12dc477a 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.h +++ b/drivers/media/dvb/dvb-core/dvbdev.h @@ -31,6 +31,10 @@ #define DVB_MAJOR 212 +#define DVB_MAX_ADAPTERS 8 + +#define DVB_UNSET (-1) + #define DVB_DEVICE_VIDEO 0 #define DVB_DEVICE_AUDIO 1 #define DVB_DEVICE_SEC 2 @@ -41,6 +45,11 @@ #define DVB_DEVICE_NET 7 #define DVB_DEVICE_OSD 8 +#define DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr) \ + static short adapter_nr[] = \ + {[0 ... (DVB_MAX_ADAPTERS - 1)] = DVB_UNSET }; \ + module_param_array(adapter_nr, short, NULL, 0444); \ + MODULE_PARM_DESC(adapter_nr, "DVB adapter numbers") struct dvb_adapter { int num; @@ -78,7 +87,9 @@ struct dvb_device { }; -extern int dvb_register_adapter (struct dvb_adapter *adap, const char *name, struct module *module, struct device *device); +extern int dvb_register_adapter(struct dvb_adapter *adap, const char *name, + struct module *module, struct device *device, + short *adapter_nums); extern int dvb_unregister_adapter (struct dvb_adapter *adap); extern int dvb_register_device (struct dvb_adapter *adap, @@ -104,7 +115,7 @@ extern int dvb_usercopy(struct inode *inode, struct file *file, unsigned int cmd, void *arg)); /** generic DVB attach function. */ -#ifdef CONFIG_DVB_CORE_ATTACH +#ifdef CONFIG_MEDIA_ATTACH #define dvb_attach(FUNCTION, ARGS...) ({ \ void *__r = NULL; \ typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index d73934dd4c5..f00a0eb4042 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,7 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT + depends on HOTPLUG # due to FW_LOADER select FW_LOADER help By enabling this you will be able to choose the various supported @@ -25,7 +26,7 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -35,7 +36,7 @@ config DVB_USB_DIBUSB_MB depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. @@ -56,7 +57,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. @@ -73,8 +74,8 @@ config DVB_USB_DIB0700 select DVB_DIB7000P select DVB_DIB7000M select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select DVB_TUNER_MT2266 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The @@ -93,7 +94,7 @@ config DVB_USB_UMT_010 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -105,6 +106,7 @@ config DVB_USB_CXUSB select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -117,7 +119,7 @@ config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -128,7 +130,7 @@ config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. @@ -137,7 +139,7 @@ config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. @@ -189,7 +191,7 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. @@ -226,8 +228,8 @@ config DVB_USB_OPERA1 config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 60a910052c1..c6511a6c0ab 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -63,5 +63,5 @@ obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 -EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c index a6c5f19f680..dc8c8784caa 100644 --- a/drivers/media/dvb/dvb-usb/a800.c +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -18,6 +18,9 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(debug,0x01,args) static int a800_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -94,7 +97,8 @@ static struct dvb_usb_device_properties a800_properties; static int a800_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&a800_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &a800_properties, + THIS_MODULE, NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index e7f76f515b4..cfe71feefca 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -39,6 +39,8 @@ int dvb_usb_af9005_dump_eeprom = 0; module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* remote control decoder */ int (*rc_decode) (struct dvb_usb_device * d, u8 * data, int len, u32 * event, int *state); @@ -1020,7 +1022,8 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &af9005_properties, THIS_MODULE, NULL); + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id af9005_usb_table[] = { diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c index f3ff8131469..2ccb90fa60c 100644 --- a/drivers/media/dvb/dvb-usb/au6610.c +++ b/drivers/media/dvb/dvb-usb/au6610.c @@ -19,6 +19,8 @@ static int dvb_usb_au6610_debug; module_param_named(debug, dvb_usb_au6610_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { @@ -163,7 +165,9 @@ static int au6610_probe(struct usb_interface *intf, if (intf->num_altsetting < AU6610_ALTSETTING_COUNT) return -ENODEV; - if ((ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); if (alt == NULL) { diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index c58365005ac..720fcd1c3c1 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -23,6 +23,8 @@ * * see Documentation/dvb/README.dvb-usb for more information */ +#include <media/tuner.h> + #include "cxusb.h" #include "cx22702.h" @@ -31,12 +33,15 @@ #include "mt352_priv.h" #include "zl10353.h" #include "tuner-xc2028.h" -#include "tuner-xc2028-types.h" +#include "tuner-simple.h" /* debug */ static int dvb_usb_cxusb_debug; module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_info(args...) dprintk(dvb_usb_cxusb_debug,0x01,args) #define deb_i2c(args...) if (d->udev->descriptor.idVendor == USB_VID_MEDION) \ dprintk(dvb_usb_cxusb_debug,0x01,args) @@ -450,8 +455,9 @@ static struct mt352_config cxusb_mt352_xc3028_config = { /* Callbacks for DVB USB */ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) { - dvb_attach(dvb_pll_attach, adap->fe, 0x61, &adap->dev->i2c_adap, - DVB_PLL_FMD1216ME); + dvb_attach(simple_tuner_attach, adap->fe, + &adap->dev->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3); return 0; } @@ -477,8 +483,8 @@ static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap) static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) { - dvb_attach(dvb_pll_attach, adap->fe, 0x61, &adap->dev->i2c_adap, - DVB_PLL_LG_TDVS_H06XF); + dvb_attach(simple_tuner_attach, adap->fe, + &adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); return 0; } @@ -488,14 +494,14 @@ static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg) switch (command) { case XC2028_TUNER_RESET: - deb_info("%s: XC2028_TUNER_RESET %d\n", __FUNCTION__, arg); + deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg); cxusb_bluebird_gpio_pulse(d, 0x01, 1); break; case XC2028_RESET_CLK: - deb_info("%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg); + deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg); break; default: - deb_info("%s: unknown command %d, arg %d\n", __FUNCTION__, + deb_info("%s: unknown command %d, arg %d\n", __func__, command, arg); return -EINVAL; } @@ -509,13 +515,12 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) struct xc2028_config cfg = { .i2c_adap = &adap->dev->i2c_adap, .i2c_addr = 0x61, - .video_dev = adap->dev, .callback = dvico_bluebird_xc2028_callback, }; static struct xc2028_ctrl ctl = { .fname = "xc3028-dvico-au-01.fw", .max_len = 64, - .scode_table = ZARLINK456, + .scode_table = XC3028_FE_ZARLINK456, }; fe = dvb_attach(xc2028_attach, adap->fe, &cfg); @@ -720,16 +725,24 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&cxusb_medion_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dee1601_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_lgz201_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dtt7579_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dualdig4_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_nano2_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_nano2_needsfirmware_properties,THIS_MODULE,NULL) == 0) { + if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, + &cxusb_bluebird_nano2_needsfirmware_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; - } return -EINVAL; } diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 4a903ea9589..66d4dc6ba46 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -37,6 +37,7 @@ struct dib0700_state { u8 channel_state; u16 mt2060_if1[2]; u8 rc_toggle; + u8 rc_counter; u8 is_dib7000pc; }; @@ -44,12 +45,15 @@ extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen); extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw); +extern int dib0700_rc_setup(struct dvb_usb_device *d); extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); extern struct i2c_algorithm dib0700_i2c_algo; extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, int *cold); extern int dib0700_device_count; +extern int dvb_usb_dib0700_ir_proto; extern struct dvb_usb_device_properties dib0700_devices[]; extern struct usb_device_id dib0700_usb_id_table[]; + #endif diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index c9857d5c698..595a04696c8 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -13,10 +13,12 @@ int dvb_usb_dib0700_debug; module_param_named(debug,dvb_usb_dib0700_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS); -static int dvb_usb_dib0700_ir_proto = 1; +int dvb_usb_dib0700_ir_proto = 1; module_param(dvb_usb_dib0700_ir_proto, int, 0644); MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6)."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* expecting rx buffer: request data[0] data[1] ... data[2] */ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) { @@ -261,7 +263,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return dib0700_ctrl_wr(adap->dev, b, 4); } -static int dib0700_rc_setup(struct dvb_usb_device *d) +int dib0700_rc_setup(struct dvb_usb_device *d) { u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0}; int i = dib0700_ctrl_wr(d, rc_setup, 3); @@ -279,7 +281,8 @@ static int dib0700_probe(struct usb_interface *intf, struct dvb_usb_device *dev; for (i = 0; i < dib0700_device_count; i++) - if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, &dev) == 0) + if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, + &dev, adapter_nr) == 0) { dib0700_rc_setup(dev); return 0; diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index e7093826e97..c4d40fe01d5 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -13,6 +13,7 @@ #include "dib7000p.h" #include "mt2060.h" #include "mt2266.h" +#include "tuner-xc2028.h" #include "dib0070.h" static int force_lna_activation; @@ -110,8 +111,8 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], @@ -297,10 +298,156 @@ static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;; } +/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ +static struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ +static struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, 30000, /* internal, sampling */ + 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ + 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, + modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000, /* xtal_hz */ +}; + +static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { + .output_mpeg2_in_188_bytes = 1, + .tuner_is_baseband = 1, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, +}; + +static int stk7700ph_xc3028_callback(void *ptr, int command, int arg) +{ + struct dvb_usb_adapter *adap = ptr; + + switch (command) { + case XC2028_TUNER_RESET: + /* Send the tuner in then out of reset */ + dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10); + dib7000p_set_gpio(adap->fe, 8, 0, 1); + break; + case XC2028_RESET_CLK: + break; + default: + err("%s: unknown command %d, arg %d\n", __func__, + command, arg); + return -EINVAL; + } + return 0; +} + +static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_DIBCOM52, +}; + +static struct xc2028_config stk7700ph_xc3028_config = { + .i2c_addr = 0x61, + .callback = stk7700ph_xc3028_callback, + .ctrl = &stk7700ph_xc3028_ctrl, +}; + +static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; + + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + msleep(10); + + dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &stk7700ph_dib7700_xc3028_config); + + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &stk7700ph_dib7700_xc3028_config); + + return adap->fe == NULL ? -ENODEV : 0; +} + +static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + + tun_i2c = dib7000p_get_i2c_master(adap->fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + stk7700ph_xc3028_config.i2c_adap = tun_i2c; + stk7700ph_xc3028_config.video_dev = adap; + + return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config) + == NULL ? -ENODEV : 0; +} + #define DEFAULT_RC_INTERVAL 150 static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; +/* Number of keypresses to ignore before start repeating */ +#define RC_REPEAT_DELAY 2 + static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { u8 key[4]; @@ -314,18 +461,67 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) err("RC Query Failed"); return -1; } + + /* losing half of KEY_0 events from Philipps rc5 remotes.. */ if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0; - if (key[3-1]!=st->rc_toggle) { + + /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ + + dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */ + + switch (dvb_usb_dib0700_ir_proto) { + case 0: { + /* NEC protocol sends repeat code as 0 0 0 FF */ + if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && + (key[3] == 0xFF)) { + st->rc_counter++; + if (st->rc_counter > RC_REPEAT_DELAY) { + *event = d->last_event; + *state = REMOTE_KEY_PRESSED; + st->rc_counter = RC_REPEAT_DELAY; + } + return 0; + } for (i=0;i<d->props.rc_key_map_size; i++) { if (keymap[i].custom == key[3-2] && keymap[i].data == key[3-3]) { + st->rc_counter = 0; *event = keymap[i].event; *state = REMOTE_KEY_PRESSED; - st->rc_toggle=key[3-1]; + d->last_event = keymap[i].event; return 0; } } - err("Unknown remote controller key : %2X %2X",(int)key[3-2],(int)key[3-3]); + break; + } + default: { + /* RC-5 protocol changes toggle bit on new keypress */ + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == key[3-2] && keymap[i].data == key[3-3]) { + if (d->last_event == keymap[i].event && + key[3-1] == st->rc_toggle) { + st->rc_counter++; + /* prevents unwanted double hits */ + if (st->rc_counter > RC_REPEAT_DELAY) { + *event = d->last_event; + *state = REMOTE_KEY_PRESSED; + st->rc_counter = RC_REPEAT_DELAY; + } + + return 0; + } + st->rc_counter = 0; + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + st->rc_toggle = key[3-1]; + d->last_event = keymap[i].event; + return 0; + } + } + break; + } } + err("Unknown remote controller key: %2X %2X %2X %2X", (int) key[3-2], (int) key[3-3], (int) key[3-1], (int) key[3]); + d->last_event = 0; return 0; } @@ -649,8 +845,8 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c; s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) @@ -794,7 +990,12 @@ static struct dib7000p_config dib7070p_dib7000p_config = { /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); @@ -808,9 +1009,11 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, &dib7070p_dib7000p_config); + dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &dib7070p_dib7000p_config); - adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &dib7070p_dib7000p_config); + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &dib7070p_dib7000p_config); return adap->fe == NULL ? -ENODEV : 0; } @@ -878,34 +1081,43 @@ static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) /* DVB-USB and USB stuff follows */ struct usb_device_id dib0700_usb_id_table[] = { /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, - - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) }, - { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, - { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, - { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, + { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, + { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) }, /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, - { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) }, + { USB_DEVICE(USB_VID_PINNACLE, + USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, + { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, - { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, - { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, - { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, - { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, -/* 25 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, - { 0 } /* Terminating entry */ + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, + { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, +/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) }, +/* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, + { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -969,7 +1181,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, }, { "Leadtek Winfast DTV Dongle (STK7700P based)", - { &dib0700_usb_id_table[8], NULL }, + { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, { NULL }, }, { "AVerMedia AVerTV DVB-T Express", @@ -1069,12 +1281,16 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 1, + .num_device_descs = 2, .devices = { { "ASUS My Cinema U3000 Mini DVBT Tuner", { &dib0700_usb_id_table[23], NULL }, { NULL }, }, + { "Yuan EC372S", + { &dib0700_usb_id_table[31], NULL }, + { NULL }, + } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, @@ -1090,7 +1306,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 6, + .num_device_descs = 9, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -1116,6 +1332,18 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[26], NULL }, { NULL }, }, + { "Pinnacle PCTV 72e", + { &dib0700_usb_id_table[29], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 73e", + { &dib0700_usb_id_table[30], NULL }, + { NULL }, + }, + { "Terratec Cinergy T USB XXS", + { &dib0700_usb_id_table[33], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, @@ -1155,6 +1383,40 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, } } + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .frontend_attach = stk7700ph_frontend_attach, + .tuner_attach = stk7700ph_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 3, + .devices = { + { "Terratec Cinergy HT USB XE", + { &dib0700_usb_id_table[27], NULL }, + { NULL }, + }, + { "Pinnacle Expresscard 320cx", + { &dib0700_usb_id_table[28], NULL }, + { NULL }, + }, + { "Terratec Cinergy HT Express", + { &dib0700_usb_id_table[32], NULL }, + { NULL }, + }, + }, + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query }, }; diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index 043cadae085..eeef50bff4f 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -14,6 +14,8 @@ */ #include "dibusb.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct dvb_usb_adapter *adap = fe->dvb->priv; @@ -107,10 +109,14 @@ static struct dvb_usb_device_properties artec_t1_usb2_properties; static int dibusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&dibusb1_1_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&dibusb1_1_an2235_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&dibusb2_0b_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&artec_t1_usb2_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb2_0b_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -EINVAL; diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c index e7ea3e753d6..059cec95531 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -14,13 +14,16 @@ */ #include "dibusb.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* USB Driver stuff */ static struct dvb_usb_device_properties dibusb_mc_properties; static int dibusb_mc_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&dibusb_mc_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &dibusb_mc_properties, THIS_MODULE, + NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c index 3acbda4aa27..b545cf3eab2 100644 --- a/drivers/media/dvb/dvb-usb/digitv.c +++ b/drivers/media/dvb/dvb-usb/digitv.c @@ -20,6 +20,9 @@ static int dvb_usb_digitv_debug; module_param_named(debug,dvb_usb_digitv_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(dvb_usb_digitv_debug,0x01,args) static int digitv_ctrl_msg(struct dvb_usb_device *d, @@ -256,8 +259,9 @@ static int digitv_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct dvb_usb_device *d; - int ret; - if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) { + int ret = dvb_usb_device_init(intf, &digitv_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { u8 b[4] = { 0 }; if (d != NULL) { /* do that only when the firmware is loaded */ diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c index d86cf9bee91..81a6cbf6016 100644 --- a/drivers/media/dvb/dvb-usb/dtt200u.c +++ b/drivers/media/dvb/dvb-usb/dtt200u.c @@ -18,6 +18,8 @@ int dvb_usb_dtt200u_debug; module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) { u8 b = SET_INIT; @@ -101,11 +103,16 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_fc_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_zl0353_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_miglia_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &dtt200u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -ENODEV; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/drivers/media/dvb/dvb-usb/dvb-usb-common.h index 35ab68f6dcf..6b7b2a89242 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-common.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-common.h @@ -40,7 +40,8 @@ extern int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap); extern int dvb_usb_i2c_init(struct dvb_usb_device *); extern int dvb_usb_i2c_exit(struct dvb_usb_device *); -extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap); +extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, + short *adapter_nums); extern int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap); extern int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap); extern int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c index 4561a672da9..ce8cd0c5d83 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -77,12 +77,13 @@ static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) return dvb_usb_ctrl_feed(dvbdmxfeed,0); } -int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap) +int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums) { - int ret; + int ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, + adap->dev->owner, &adap->dev->udev->dev, + adapter_nums); - if ((ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, - adap->dev->owner, &adap->dev->udev->dev)) < 0) { + if (ret < 0) { deb_info("dvb_register_adapter failed: error %d", ret); goto err; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c index e1112e39fb6..733a7ff7b20 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -127,7 +127,7 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, if ((*pos + hx->len + 4) >= fw->size) return -EINVAL; - hx->addr = le16_to_cpu( *((u16 *) &b[1]) ); + hx->addr = b[1] | (b[2] << 8); hx->type = b[3]; if (hx->type == 0x04) { diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index aa4844ef875..34245d1b7dd 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -40,14 +40,15 @@ #define USB_VID_MSI 0x0db0 #define USB_VID_OPERA1 0x695c #define USB_VID_PINNACLE 0x2304 +#define USB_VID_TECHNOTREND 0x0b48 #define USB_VID_TERRATEC 0x0ccd #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 #define USB_VID_UNIWILL 0x1584 #define USB_VID_WIDEVIEW 0x14aa -/* dom : pour gigabyte u7000 */ #define USB_VID_GIGABYTE 0x1044 +#define USB_VID_YUAN 0x1164 /* Product IDs */ @@ -134,10 +135,17 @@ #define USB_PID_AVERMEDIA_EXPRESS 0xb568 #define USB_PID_AVERMEDIA_VOLAR 0xa807 #define USB_PID_AVERMEDIA_VOLAR_2 0xb808 +#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 +#define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 +#define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e #define USB_PID_PINNACLE_PCTV2000E 0x022c #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 #define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229 +#define USB_PID_PINNACLE_PCTV72E 0x0236 +#define USB_PID_PINNACLE_PCTV73E 0x0237 #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 @@ -172,6 +180,7 @@ #define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 #define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 #define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 #define USB_PID_GENPIX_8PSK_REV_2 0x0202 @@ -183,9 +192,9 @@ #define USB_PID_OPERA1_WARM 0x3829 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 -/* dom pour gigabyte u7000 */ #define USB_PID_GIGABYTE_U7000 0x7001 #define USB_PID_ASUS_U3000 0x171f #define USB_PID_ASUS_U3100 0x173f +#define USB_PID_YUAN_EC372S 0x1edc #endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c index cdd717c3fe4..e331db8c77b 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -26,7 +26,7 @@ static int dvb_usb_force_pid_filter_usage; module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); -static int dvb_usb_adapter_init(struct dvb_usb_device *d) +static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) { struct dvb_usb_adapter *adap; int ret,n; @@ -72,7 +72,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d) } if ((ret = dvb_usb_adapter_stream_init(adap)) || - (ret = dvb_usb_adapter_dvb_init(adap)) || + (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) || (ret = dvb_usb_adapter_frontend_init(adap))) { return ret; } @@ -122,7 +122,7 @@ static int dvb_usb_exit(struct dvb_usb_device *d) return 0; } -static int dvb_usb_init(struct dvb_usb_device *d) +static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) { int ret = 0; @@ -143,7 +143,7 @@ static int dvb_usb_init(struct dvb_usb_device *d) dvb_usb_device_power_ctrl(d, 1); if ((ret = dvb_usb_i2c_init(d)) || - (ret = dvb_usb_adapter_init(d))) { + (ret = dvb_usb_adapter_init(d, adapter_nums))) { dvb_usb_exit(d); return ret; } @@ -213,8 +213,10 @@ int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) /* * USB */ -int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_device_properties - *props, struct module *owner,struct dvb_usb_device **du) +int dvb_usb_device_init(struct usb_interface *intf, + struct dvb_usb_device_properties *props, + struct module *owner, struct dvb_usb_device **du, + short *adapter_nums) { struct usb_device *udev = interface_to_usbdev(intf); struct dvb_usb_device *d = NULL; @@ -254,7 +256,7 @@ int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_device_proper if (du != NULL) *du = d; - ret = dvb_usb_init(d); + ret = dvb_usb_init(d, adapter_nums); if (ret == 0) info("%s successfully initialized and connected.",desc->name); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h index d1b3c7b81ff..b1de0f7e26e 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -372,7 +372,10 @@ struct dvb_usb_device { void *priv; }; -extern int dvb_usb_device_init(struct usb_interface *, struct dvb_usb_device_properties *, struct module *, struct dvb_usb_device **); +extern int dvb_usb_device_init(struct usb_interface *, + struct dvb_usb_device_properties *, + struct module *, struct dvb_usb_device **, + short *adapter_nums); extern void dvb_usb_device_exit(struct usb_interface *); /* the generic read/write method for device control */ diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 6b99d9f4d5b..037f7ffb47b 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -16,6 +16,8 @@ static int dvb_usb_gl861_debug; module_param_named(debug,dvb_usb_gl861_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { @@ -45,6 +47,8 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, return -EINVAL; } + msleep(1); /* avoid I2C errors */ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type, value, index, rbuf, rlen, 2000); } @@ -90,16 +94,6 @@ static struct i2c_algorithm gl861_i2c_algo = { }; /* Callbacks for DVB USB */ -static int gl861_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - - return 0; -} - static struct zl10353_config gl861_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -140,7 +134,9 @@ static int gl861_probe(struct usb_interface *intf, if (intf->num_altsetting < 2) return -ENODEV; - if ((ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { alt = usb_altnum_to_altsetting(intf, 0); if (alt == NULL) { @@ -168,7 +164,6 @@ static struct dvb_usb_device_properties gl861_properties = { .size_of_priv = 0, - .identify_state = gl861_identify_state, .num_adapters = 1, .adapter = {{ @@ -190,13 +185,15 @@ static struct dvb_usb_device_properties gl861_properties = { .num_device_descs = 2, .devices = { - { "MSI Mega Sky 55801 DVB-T USB2.0", - { &gl861_table[0], NULL }, - { NULL }, + { + .name = "MSI Mega Sky 55801 DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[0], NULL }, }, - { "A-LINK DTU DVB-T USB2.0", - { &gl861_table[1], NULL }, - { NULL }, + { + .name = "A-LINK DTU DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[1], NULL }, }, } }; diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c index e37142d9271..262a858c306 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c +++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c @@ -152,7 +152,7 @@ static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, { struct gp8psk_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, m->msg, m->msg_len)) { @@ -167,7 +167,7 @@ static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe, struct gp8psk_fe_state *st = fe->demodulator_priv; u8 cmd; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); /* These commands are certainly wrong */ cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c index 83e8535014c..2653120673b 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/drivers/media/dvb/dvb-usb/gp8psk.c @@ -22,6 +22,8 @@ int dvb_usb_gp8psk_debug; module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { int ret = 0,try = 0; @@ -144,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; @@ -190,7 +192,8 @@ static int gp8psk_usb_probe(struct usb_interface *intf, { int ret; struct usb_device *udev = interface_to_usbdev(intf); - ret = dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL); + ret = dvb_usb_device_init(intf, &gp8psk_properties, + THIS_MODULE, NULL, adapter_nr); if (ret == 0) { info("found Genpix USB device pID = %x (hex)", le16_to_cpu(udev->descriptor.idProduct)); diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c index a956bc503a4..54626a0dbf6 100644 --- a/drivers/media/dvb/dvb-usb/m920x.c +++ b/drivers/media/dvb/dvb-usb/m920x.c @@ -16,12 +16,15 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" +#include <asm/unaligned.h> /* debug */ static int dvb_usb_m920x_debug; module_param_named(debug,dvb_usb_m920x_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid); static inline int m920x_read(struct usb_device *udev, u8 request, u16 value, @@ -345,13 +348,13 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar for (pass = 0; pass < 2; pass++) { for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = le16_to_cpu(*(u16 *)(fw->data + i)); + value = get_unaligned_le16(fw->data + i); i += sizeof(u16); - index = le16_to_cpu(*(u16 *)(fw->data + i)); + index = get_unaligned_le16(fw->data + i); i += sizeof(u16); - size = le16_to_cpu(*(u16 *)(fw->data + i)); + size = get_unaligned_le16(fw->data + i); i += sizeof(u16); if (pass == 1) { @@ -477,7 +480,7 @@ static struct qt1010_config m920x_qt1010_config = { /* Callbacks for DVB USB */ static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(mt352_attach, &m920x_mt352_config, @@ -489,7 +492,7 @@ static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(tda10046_attach, &m920x_tda10046_08_config, @@ -501,7 +504,7 @@ static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(tda10046_attach, &m920x_tda10046_0b_config, @@ -513,7 +516,7 @@ static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL) return -ENODEV; @@ -523,7 +526,7 @@ static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL) return -ENODEV; @@ -533,7 +536,7 @@ static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) return -ENODEV; @@ -618,27 +621,31 @@ static int m920x_probe(struct usb_interface *intf, * multi-tuner device */ - if ((ret = dvb_usb_device_init(intf, &megasky_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &megasky_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { rc_init_seq = megasky_rc_init; goto found; } - if ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { /* No remote control, so no rc_init_seq */ goto found; } /* This configures both tuners on the TV Walker Twin */ - if ((ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { rc_init_seq = tvwalkertwin_rc_init; goto found; } - if ((ret = dvb_usb_device_init(intf, &dposh_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &dposh_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { /* Remote controller not supported yet. */ goto found; } diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c index badc468170e..07fb843c7c2 100644 --- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -15,6 +15,8 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(debug,0x01,args) #define deb_ee(args...) dprintk(debug,0x02,args) @@ -142,7 +144,8 @@ static struct dvb_usb_device_properties nova_t_properties; static int nova_t_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&nova_t_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &nova_t_properties, + THIS_MODULE, NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c index 302cc67407c..7e32d11f32b 100644 --- a/drivers/media/dvb/dvb-usb/opera1.c +++ b/drivers/media/dvb/dvb-usb/opera1.c @@ -46,6 +46,9 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + + static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value, u8 * data, u16 len, int flags) { @@ -243,7 +246,7 @@ static struct stv0299_config opera1_stv0299_config = { .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_0, + .lock_output = STV0299_LOCKOUTPUT_0, .volt13_op0_op1 = STV0299_VOLT13_OP0, .inittab = opera1_inittab, .set_symbol_rate = opera1_stv0299_set_symbol_rate, @@ -548,7 +551,8 @@ static int opera1_probe(struct usb_interface *intf, return -EINVAL; } - if (dvb_usb_device_init(intf, &opera1_properties, THIS_MODULE, NULL) != 0) + if (0 != dvb_usb_device_init(intf, &opera1_properties, + THIS_MODULE, NULL, adapter_nr)) return -EINVAL; return 0; } diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c index 3b9da9c25c6..20ca9d9ee99 100644 --- a/drivers/media/dvb/dvb-usb/ttusb2.c +++ b/drivers/media/dvb/dvb-usb/ttusb2.c @@ -37,6 +37,8 @@ static int dvb_usb_ttusb2_debug; module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct ttusb2_state { u8 id; }; @@ -145,6 +147,7 @@ static struct tda10086_config tda10086_config = { .demod_address = 0x0e, .invert = 0, .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, }; static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap) @@ -176,17 +179,25 @@ static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap) /* DVB USB Driver stuff */ static struct dvb_usb_device_properties ttusb2_properties; +static struct dvb_usb_device_properties ttusb2_properties_s2400; static int ttusb2_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&ttusb2_properties,THIS_MODULE,NULL); + if (0 == dvb_usb_device_init(intf, &ttusb2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400, + THIS_MODULE, NULL, adapter_nr)) + return 0; + return -ENODEV; } static struct usb_device_id ttusb2_table [] = { - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) }, - {} /* Terminating entry */ + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) }, + { USB_DEVICE(USB_VID_TECHNOTREND, + USB_PID_TECHNOTREND_CONNECT_S2400) }, + {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, ttusb2_table); @@ -242,6 +253,54 @@ static struct dvb_usb_device_properties ttusb2_properties = { } }; +static struct dvb_usb_device_properties ttusb2_properties_s2400 = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-tt-s2400-01.fw", + + .size_of_priv = sizeof(struct ttusb2_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_attach, + .tuner_attach = ttusb2_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + } + }, + + .power_ctrl = ttusb2_power_ctrl, + .identify_state = ttusb2_identify_state, + + .i2c_algo = &ttusb2_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Technotrend TT-connect S-2400", + { &ttusb2_table[2], NULL }, + { NULL }, + }, + } +}; + static struct usb_driver ttusb2_driver = { .name = "dvb_usb_ttusb2", .probe = ttusb2_probe, diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c index 0dcab3d4e23..118aab1a3e5 100644 --- a/drivers/media/dvb/dvb-usb/umt-010.c +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -13,6 +13,8 @@ #include "mt352.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int umt_mt352_demod_init(struct dvb_frontend *fe) { static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; @@ -75,7 +77,8 @@ static struct dvb_usb_device_properties umt_properties; static int umt_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&umt_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &umt_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -EINVAL; } @@ -104,7 +107,7 @@ static struct dvb_usb_device_properties umt_properties = { /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, - .count = 20, + .count = MAX_NO_URBS_FOR_DATA_STREAM, .endpoint = 0x06, .u = { .bulk = { diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/dvb/dvb-usb/vp702x-fe.c index c3fdc7cd094..ccc7e445266 100644 --- a/drivers/media/dvb/dvb-usb/vp702x-fe.c +++ b/drivers/media/dvb/dvb-usb/vp702x-fe.c @@ -67,7 +67,7 @@ static int vp702x_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) { struct vp702x_fe_state *st = fe->demodulator_priv; vp702x_fe_refresh_state(st); - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (st->lock == 0) *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; @@ -121,7 +121,7 @@ static int vp702x_fe_read_snr(struct dvb_frontend* fe, u16 *snr) static int vp702x_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); tune->min_delay_ms = 2000; return 0; } @@ -183,21 +183,21 @@ static int vp702x_fe_set_frontend(struct dvb_frontend* fe, static int vp702x_fe_init(struct dvb_frontend *fe) { struct vp702x_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); vp702x_usb_in_op(st->d, RESET_TUNER, 0, 0, NULL, 0); return 0; } static int vp702x_fe_sleep(struct dvb_frontend *fe) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } static int vp702x_fe_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } @@ -208,7 +208,7 @@ static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, u8 cmd[8],ibuf[10]; memset(cmd,0,8); - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (m->msg_len > 4) return -EINVAL; @@ -230,7 +230,7 @@ static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } @@ -238,7 +238,7 @@ static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { struct vp702x_fe_state *st = fe->demodulator_priv; u8 ibuf[10]; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); st->tone_mode = tone; @@ -263,7 +263,7 @@ static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t { struct vp702x_fe_state *st = fe->demodulator_priv; u8 ibuf[10]; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); st->voltage = voltage; diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c index e553c139ac4..986fff9a5ba 100644 --- a/drivers/media/dvb/dvb-usb/vp702x.c +++ b/drivers/media/dvb/dvb-usb/vp702x.c @@ -21,6 +21,8 @@ int dvb_usb_vp702x_debug; module_param_named(debug,dvb_usb_vp702x_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct vp702x_state { int pid_filter_count; int pid_filter_can_bypass; @@ -238,7 +240,8 @@ static struct dvb_usb_device_properties vp702x_properties; static int vp702x_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&vp702x_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &vp702x_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id vp702x_usb_table [] = { diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c index c172babf59b..acb345504e0 100644 --- a/drivers/media/dvb/dvb-usb/vp7045.c +++ b/drivers/media/dvb/dvb-usb/vp7045.c @@ -18,6 +18,9 @@ static int dvb_usb_vp7045_debug; module_param_named(debug,dvb_usb_vp7045_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args) #define deb_rc(args...) dprintk(dvb_usb_vp7045_debug,0x04,args) @@ -219,7 +222,8 @@ static struct dvb_usb_device_properties vp7045_properties; static int vp7045_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&vp7045_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &vp7045_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id vp7045_usb_table [] = { diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 9ad86ce4a4e..c20553c4da1 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -15,22 +15,36 @@ config DVB_FE_CUSTOMISE comment "DVB-S (satellite) frontends" depends on DVB_CORE -config DVB_STV0299 - tristate "ST STV0299 based" +config DVB_CX24110 + tristate "Conexant CX24110 based" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. -config DVB_CX24110 - tristate "Conexant CX24110 based" +config DVB_CX24123 + tristate "Conexant CX24123 based" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. -config DVB_CX24123 - tristate "Conexant CX24123 based" +config DVB_MT312 + tristate "Zarlink VP310/MT312/ZL10313 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_S5H1420 + tristate "Samsung S5H1420 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STV0299 + tristate "ST STV0299 based" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -43,8 +57,8 @@ config DVB_TDA8083 help A DVB-S tuner module. Say Y when you want to support this frontend. -config DVB_MT312 - tristate "Zarlink VP310/MT312 based" +config DVB_TDA10086 + tristate "Philips TDA10086 based" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -57,26 +71,33 @@ config DVB_VES1X93 help A DVB-S tuner module. Say Y when you want to support this frontend. -config DVB_S5H1420 - tristate "Samsung S5H1420 based" +config DVB_TUNER_ITD1000 + tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. -config DVB_TDA10086 - tristate "Philips TDA10086 based" +config DVB_TDA826X + tristate "Philips TDA826X silicon tuner" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help - A DVB-S tuner module. Say Y when you want to support this frontend. + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_TUA6100 + tristate "Infineon TUA6100 PLL" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S PLL chip. comment "DVB-T (terrestrial) frontends" depends on DVB_CORE config DVB_SP8870 tristate "Spase sp8870 based" - depends on DVB_CORE && I2C + depends on DVB_CORE && I2C && HOTPLUG default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -89,7 +110,7 @@ config DVB_SP8870 config DVB_SP887X tristate "Spase sp887x based" - depends on DVB_CORE && I2C + depends on DVB_CORE && I2C && HOTPLUG default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -123,7 +144,7 @@ config DVB_L64781 config DVB_TDA1004X tristate "Philips TDA10045H/TDA10046H based" - depends on DVB_CORE && I2C + depends on DVB_CORE && I2C && HOTPLUG default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -188,6 +209,14 @@ config DVB_DIB7000P A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. +config DVB_TDA10048 + tristate "Philips TDA10048HN based" + depends on DVB_CORE && I2C && HOTPLUG + default m if DVB_FE_CUSTOMISE + select FW_LOADER + help + A DVB-T tuner module. Say Y when you want to support this frontend. + comment "DVB-C (cable) frontends" depends on DVB_CORE @@ -224,7 +253,7 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends" config DVB_NXT200X tristate "NxtWave Communications NXT2002/NXT2004 based" - depends on DVB_CORE && I2C + depends on DVB_CORE && I2C && HOTPLUG default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -239,7 +268,7 @@ config DVB_NXT200X config DVB_OR51211 tristate "Oren OR51211 based" - depends on DVB_CORE && I2C + depends on DVB_CORE && I2C && HOTPLUG default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -252,7 +281,7 @@ config DVB_OR51211 config DVB_OR51132 tristate "Oren OR51132 based" - depends on DVB_CORE && I2C + depends on DVB_CORE && I2C && HOTPLUG default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -268,7 +297,7 @@ config DVB_OR51132 config DVB_BCM3510 tristate "Broadcom BCM3510" - depends on DVB_CORE && I2C + depends on DVB_CORE && I2C && HOTPLUG default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -291,65 +320,32 @@ config DVB_S5H1409 An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. -comment "Tuners/PLL support" - depends on DVB_CORE - -config DVB_PLL - tristate "Generic I2C PLL based tuners" - depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE - help - This module drives a number of tuners based on PLL chips with a - common I2C interface. Say Y when you want to support these tuners. - -config DVB_TDA826X - tristate "Philips TDA826X silicon tuner" +config DVB_AU8522 + tristate "Auvitek AU8522 based" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help - A DVB-S silicon tuner module. Say Y when you want to support this tuner. + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. -config DVB_TDA827X - tristate "Philips TDA827X silicon tuner" +config DVB_S5H1411 + tristate "Samsung S5H1411 based" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help - A DVB-T silicon tuner module. Say Y when you want to support this tuner. + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. -config DVB_TDA18271 - tristate "NXP TDA18271 silicon tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A silicon tuner module. Say Y when you want to support this tuner. +comment "Digital terrestrial only tuners/PLL" + depends on DVB_CORE -config DVB_TUNER_QT1010 - tristate "Quantek QT1010 silicon tuner" +config DVB_PLL + tristate "Generic I2C PLL based tuners" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help - A driver for the silicon tuner QT1010 from Quantek. - -config DVB_TUNER_MT2060 - tristate "Microtune MT2060 silicon IF tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon IF tuner MT2060 from Microtune. - -config DVB_TUNER_MT2266 - tristate "Microtune MT2266 silicon tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon baseband tuner MT2266 from Microtune. - -config DVB_TUNER_MT2131 - tristate "Microtune MT2131 silicon tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon baseband tuner MT2131 from Microtune. + This module drives a number of tuners based on PLL chips with a + common I2C interface. Say Y when you want to support these tuners. config DVB_TUNER_DIB0070 tristate "DiBcom DiB0070 silicon base-band tuner" @@ -360,16 +356,7 @@ config DVB_TUNER_DIB0070 This device is only used inside a SiP called togther with a demodulator for now. -config DVB_TUNER_XC5000 - tristate "Xceive XC5000 silicon tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon tuner XC5000 from Xceive. - This device is only used inside a SiP called togther with a - demodulator for now. - -comment "Miscellaneous devices" +comment "SEC control devices for DVB-S" depends on DVB_CORE config DVB_LNBP21 @@ -379,18 +366,18 @@ config DVB_LNBP21 help An SEC control chip. -config DVB_ISL6421 - tristate "ISL6421 SEC controller" +config DVB_ISL6405 + tristate "ISL6405 SEC controller" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help An SEC control chip. -config DVB_TUA6100 - tristate "TUA6100 PLL" +config DVB_ISL6421 + tristate "ISL6421 SEC controller" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help - A DVBS PLL chip. + An SEC control chip. endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 16bd107ebd3..a89dc0fc4c6 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -3,9 +3,7 @@ # EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -EXTRA_CFLAGS += -Idrivers/media/video/ - -tda18271-objs := tda18271-tables.o tda18271-common.o tda18271-fe.o +EXTRA_CFLAGS += -Idrivers/media/common/tuners/ obj-$(CONFIG_DVB_PLL) += dvb-pll.o obj-$(CONFIG_DVB_STV0299) += stv0299.o @@ -38,16 +36,14 @@ obj-$(CONFIG_DVB_S5H1420) += s5h1420.o obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o obj-$(CONFIG_DVB_CX24123) += cx24123.o obj-$(CONFIG_DVB_LNBP21) += lnbp21.o +obj-$(CONFIG_DVB_ISL6405) += isl6405.o obj-$(CONFIG_DVB_ISL6421) += isl6421.o obj-$(CONFIG_DVB_TDA10086) += tda10086.o obj-$(CONFIG_DVB_TDA826X) += tda826x.o -obj-$(CONFIG_DVB_TDA827X) += tda827x.o -obj-$(CONFIG_DVB_TDA18271) += tda18271.o -obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o -obj-$(CONFIG_DVB_TUNER_MT2266) += mt2266.o obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o -obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o obj-$(CONFIG_DVB_TUA6100) += tua6100.o -obj-$(CONFIG_DVB_TUNER_MT2131) += mt2131.o obj-$(CONFIG_DVB_S5H1409) += s5h1409.o -obj-$(CONFIG_DVB_TUNER_XC5000) += xc5000.o +obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o +obj-$(CONFIG_DVB_AU8522) += au8522.o +obj-$(CONFIG_DVB_TDA10048) += tda10048.o +obj-$(CONFIG_DVB_S5H1411) += s5h1411.o diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c new file mode 100644 index 00000000000..03900d241a7 --- /dev/null +++ b/drivers/media/dvb/frontends/au8522.c @@ -0,0 +1,709 @@ +/* + Auvitek AU8522 QAM/8VSB demodulator driver + + Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include "dvb_frontend.h" +#include "dvb-pll.h" +#include "au8522.h" + +struct au8522_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct au8522_config *config; + + struct dvb_frontend frontend; + + u32 current_frequency; + fe_modulation_t current_modulation; + +}; + +static int debug; + +#define dprintk(arg...) do { \ + if (debug) \ + printk(arg); \ + } while (0) + +/* 16 bit registers, 8 bit values */ +static int au8522_writereg(struct au8522_state *state, u16 reg, u8 data) +{ + int ret; + u8 buf [] = { reg >> 8, reg & 0xff, data }; + + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 3 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static u8 au8522_readreg(struct au8522_state *state, u16 reg) +{ + int ret; + u8 b0 [] = { reg >> 8, reg & 0xff }; + u8 b1 [] = { 0 }; + + struct i2c_msg msg [] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 2 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + return b1[0]; +} + +static int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct au8522_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + return au8522_writereg(state, 0x106, 1); + else + return au8522_writereg(state, 0x106, 0); +} + +struct mse2snr_tab { + u16 val; + u16 data; +}; + +/* VSB SNR lookup table */ +static struct mse2snr_tab vsb_mse2snr_tab[] = { + { 0, 270 }, + { 2, 250 }, + { 3, 240 }, + { 5, 230 }, + { 7, 220 }, + { 9, 210 }, + { 12, 200 }, + { 13, 195 }, + { 15, 190 }, + { 17, 185 }, + { 19, 180 }, + { 21, 175 }, + { 24, 170 }, + { 27, 165 }, + { 31, 160 }, + { 32, 158 }, + { 33, 156 }, + { 36, 152 }, + { 37, 150 }, + { 39, 148 }, + { 40, 146 }, + { 41, 144 }, + { 43, 142 }, + { 44, 140 }, + { 48, 135 }, + { 50, 130 }, + { 43, 142 }, + { 53, 125 }, + { 56, 120 }, + { 256, 115 }, +}; + +/* QAM64 SNR lookup table */ +static struct mse2snr_tab qam64_mse2snr_tab[] = { + { 15, 0 }, + { 16, 290 }, + { 17, 288 }, + { 18, 286 }, + { 19, 284 }, + { 20, 282 }, + { 21, 281 }, + { 22, 279 }, + { 23, 277 }, + { 24, 275 }, + { 25, 273 }, + { 26, 271 }, + { 27, 269 }, + { 28, 268 }, + { 29, 266 }, + { 30, 264 }, + { 31, 262 }, + { 32, 260 }, + { 33, 259 }, + { 34, 258 }, + { 35, 256 }, + { 36, 255 }, + { 37, 254 }, + { 38, 252 }, + { 39, 251 }, + { 40, 250 }, + { 41, 249 }, + { 42, 248 }, + { 43, 246 }, + { 44, 245 }, + { 45, 244 }, + { 46, 242 }, + { 47, 241 }, + { 48, 240 }, + { 50, 239 }, + { 51, 238 }, + { 53, 237 }, + { 54, 236 }, + { 56, 235 }, + { 57, 234 }, + { 59, 233 }, + { 60, 232 }, + { 62, 231 }, + { 63, 230 }, + { 65, 229 }, + { 67, 228 }, + { 68, 227 }, + { 70, 226 }, + { 71, 225 }, + { 73, 224 }, + { 74, 223 }, + { 76, 222 }, + { 78, 221 }, + { 80, 220 }, + { 82, 219 }, + { 85, 218 }, + { 88, 217 }, + { 90, 216 }, + { 92, 215 }, + { 93, 214 }, + { 94, 212 }, + { 95, 211 }, + { 97, 210 }, + { 99, 209 }, + { 101, 208 }, + { 102, 207 }, + { 104, 206 }, + { 107, 205 }, + { 111, 204 }, + { 114, 203 }, + { 118, 202 }, + { 122, 201 }, + { 125, 200 }, + { 128, 199 }, + { 130, 198 }, + { 132, 197 }, + { 256, 190 }, +}; + +/* QAM256 SNR lookup table */ +static struct mse2snr_tab qam256_mse2snr_tab[] = { + { 16, 0 }, + { 17, 400 }, + { 18, 398 }, + { 19, 396 }, + { 20, 394 }, + { 21, 392 }, + { 22, 390 }, + { 23, 388 }, + { 24, 386 }, + { 25, 384 }, + { 26, 382 }, + { 27, 380 }, + { 28, 379 }, + { 29, 378 }, + { 30, 377 }, + { 31, 376 }, + { 32, 375 }, + { 33, 374 }, + { 34, 373 }, + { 35, 372 }, + { 36, 371 }, + { 37, 370 }, + { 38, 362 }, + { 39, 354 }, + { 40, 346 }, + { 41, 338 }, + { 42, 330 }, + { 43, 328 }, + { 44, 326 }, + { 45, 324 }, + { 46, 322 }, + { 47, 320 }, + { 48, 319 }, + { 49, 318 }, + { 50, 317 }, + { 51, 316 }, + { 52, 315 }, + { 53, 314 }, + { 54, 313 }, + { 55, 312 }, + { 56, 311 }, + { 57, 310 }, + { 58, 308 }, + { 59, 306 }, + { 60, 304 }, + { 61, 302 }, + { 62, 300 }, + { 63, 298 }, + { 65, 295 }, + { 68, 294 }, + { 70, 293 }, + { 73, 292 }, + { 76, 291 }, + { 78, 290 }, + { 79, 289 }, + { 81, 288 }, + { 82, 287 }, + { 83, 286 }, + { 84, 285 }, + { 85, 284 }, + { 86, 283 }, + { 88, 282 }, + { 89, 281 }, + { 256, 280 }, +}; + +static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse, + u16 *snr) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < sz; i++) { + if (mse < tab[i].val) { + *snr = tab[i].data; + ret = 0; + break; + } + } + dprintk("%s() snr=%d\n", __func__, *snr); + return ret; +} + +/* VSB Modulation table */ +static struct { + u16 reg; + u16 data; +} VSB_mod_tab[] = { + { 0x8090, 0x84 }, + { 0x4092, 0x11 }, + { 0x2005, 0x00 }, + { 0x8091, 0x80 }, + { 0x80a3, 0x0c }, + { 0x80a4, 0xe8 }, + { 0x8081, 0xc4 }, + { 0x80a5, 0x40 }, + { 0x80a7, 0x40 }, + { 0x80a6, 0x67 }, + { 0x8262, 0x20 }, + { 0x821c, 0x30 }, + { 0x80d8, 0x1a }, + { 0x8227, 0xa0 }, + { 0x8121, 0xff }, + { 0x80a8, 0xf0 }, + { 0x80a9, 0x05 }, + { 0x80aa, 0x77 }, + { 0x80ab, 0xf0 }, + { 0x80ac, 0x05 }, + { 0x80ad, 0x77 }, + { 0x80ae, 0x41 }, + { 0x80af, 0x66 }, + { 0x821b, 0xcc }, + { 0x821d, 0x80 }, + { 0x80b5, 0xfb }, + { 0x80b6, 0x8e }, + { 0x80b7, 0x39 }, + { 0x80a4, 0xe8 }, + { 0x8231, 0x13 }, +}; + +/* QAM Modulation table */ +static struct { + u16 reg; + u16 data; +} QAM_mod_tab[] = { + { 0x80a3, 0x09 }, + { 0x80a4, 0x00 }, + { 0x8081, 0xc4 }, + { 0x80a5, 0x40 }, + { 0x80b5, 0xfb }, + { 0x80b6, 0x8e }, + { 0x80b7, 0x39 }, + { 0x80aa, 0x77 }, + { 0x80ad, 0x77 }, + { 0x80a6, 0x67 }, + { 0x8262, 0x20 }, + { 0x821c, 0x30 }, + { 0x80b8, 0x3e }, + { 0x80b9, 0xf0 }, + { 0x80ba, 0x01 }, + { 0x80bb, 0x18 }, + { 0x80bc, 0x50 }, + { 0x80bd, 0x00 }, + { 0x80be, 0xea }, + { 0x80bf, 0xef }, + { 0x80c0, 0xfc }, + { 0x80c1, 0xbd }, + { 0x80c2, 0x1f }, + { 0x80c3, 0xfc }, + { 0x80c4, 0xdd }, + { 0x80c5, 0xaf }, + { 0x80c6, 0x00 }, + { 0x80c7, 0x38 }, + { 0x80c8, 0x30 }, + { 0x80c9, 0x05 }, + { 0x80ca, 0x4a }, + { 0x80cb, 0xd0 }, + { 0x80cc, 0x01 }, + { 0x80cd, 0xd9 }, + { 0x80ce, 0x6f }, + { 0x80cf, 0xf9 }, + { 0x80d0, 0x70 }, + { 0x80d1, 0xdf }, + { 0x80d2, 0xf7 }, + { 0x80d3, 0xc2 }, + { 0x80d4, 0xdf }, + { 0x80d5, 0x02 }, + { 0x80d6, 0x9a }, + { 0x80d7, 0xd0 }, + { 0x8250, 0x0d }, + { 0x8251, 0xcd }, + { 0x8252, 0xe0 }, + { 0x8253, 0x05 }, + { 0x8254, 0xa7 }, + { 0x8255, 0xff }, + { 0x8256, 0xed }, + { 0x8257, 0x5b }, + { 0x8258, 0xae }, + { 0x8259, 0xe6 }, + { 0x825a, 0x3d }, + { 0x825b, 0x0f }, + { 0x825c, 0x0d }, + { 0x825d, 0xea }, + { 0x825e, 0xf2 }, + { 0x825f, 0x51 }, + { 0x8260, 0xf5 }, + { 0x8261, 0x06 }, + { 0x821a, 0x00 }, + { 0x8546, 0x40 }, + { 0x8210, 0x26 }, + { 0x8211, 0xf6 }, + { 0x8212, 0x84 }, + { 0x8213, 0x02 }, + { 0x8502, 0x01 }, + { 0x8121, 0x04 }, + { 0x8122, 0x04 }, + { 0x852e, 0x10 }, + { 0x80a4, 0xca }, + { 0x80a7, 0x40 }, + { 0x8526, 0x01 }, +}; + +static int au8522_enable_modulation(struct dvb_frontend *fe, + fe_modulation_t m) +{ + struct au8522_state *state = fe->demodulator_priv; + int i; + + dprintk("%s(0x%08x)\n", __func__, m); + + switch (m) { + case VSB_8: + dprintk("%s() VSB_8\n", __func__); + for (i = 0; i < ARRAY_SIZE(VSB_mod_tab); i++) + au8522_writereg(state, + VSB_mod_tab[i].reg, + VSB_mod_tab[i].data); + break; + case QAM_64: + case QAM_256: + dprintk("%s() QAM 64/256\n", __func__); + for (i = 0; i < ARRAY_SIZE(QAM_mod_tab); i++) + au8522_writereg(state, + QAM_mod_tab[i].reg, + QAM_mod_tab[i].data); + break; + default: + dprintk("%s() Invalid modulation\n", __func__); + return -EINVAL; + } + + state->current_modulation = m; + + return 0; +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int au8522_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct au8522_state *state = fe->demodulator_priv; + int ret = -EINVAL; + + dprintk("%s(frequency=%d)\n", __func__, p->frequency); + + if ((state->current_frequency == p->frequency) && + (state->current_modulation == p->u.vsb.modulation)) + return 0; + + au8522_enable_modulation(fe, p->u.vsb.modulation); + + /* Allow the demod to settle */ + msleep(100); + + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + if (ret < 0) + return ret; + + state->current_frequency = p->frequency; + + return 0; +} + +/* Reset the demod hardware and reset all of the configuration registers + to a default state. */ +static int au8522_init(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + + au8522_writereg(state, 0xa4, 1 << 5); + + au8522_i2c_gate_ctrl(fe, 1); + + return 0; +} + +static int au8522_sleep(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + + state->current_frequency = 0; + + return 0; +} + +static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct au8522_state *state = fe->demodulator_priv; + u8 reg; + u32 tuner_status = 0; + + *status = 0; + + if (state->current_modulation == VSB_8) { + dprintk("%s() Checking VSB_8\n", __func__); + reg = au8522_readreg(state, 0x4088); + if ((reg & 0x03) == 0x03) + *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI; + } else { + dprintk("%s() Checking QAM\n", __func__); + reg = au8522_readreg(state, 0x4541); + if (reg & 0x80) + *status |= FE_HAS_VITERBI; + if (reg & 0x20) + *status |= FE_HAS_LOCK | FE_HAS_SYNC; + } + + switch (state->config->status_mode) { + case AU8522_DEMODLOCKING: + dprintk("%s() DEMODLOCKING\n", __func__); + if (*status & FE_HAS_VITERBI) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + case AU8522_TUNERLOCKING: + /* Get the tuner status */ + dprintk("%s() TUNERLOCKING\n", __func__); + if (fe->ops.tuner_ops.get_status) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.get_status(fe, &tuner_status); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + if (tuner_status) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + } + + dprintk("%s() status 0x%08x\n", __func__, *status); + + return 0; +} + +static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct au8522_state *state = fe->demodulator_priv; + int ret = -EINVAL; + + dprintk("%s()\n", __func__); + + if (state->current_modulation == QAM_256) + ret = au8522_mse2snr_lookup(qam256_mse2snr_tab, + ARRAY_SIZE(qam256_mse2snr_tab), + au8522_readreg(state, 0x4522), + snr); + else if (state->current_modulation == QAM_64) + ret = au8522_mse2snr_lookup(qam64_mse2snr_tab, + ARRAY_SIZE(qam64_mse2snr_tab), + au8522_readreg(state, 0x4522), + snr); + else /* VSB_8 */ + ret = au8522_mse2snr_lookup(vsb_mse2snr_tab, + ARRAY_SIZE(vsb_mse2snr_tab), + au8522_readreg(state, 0x4311), + snr); + + return ret; +} + +static int au8522_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + return au8522_read_snr(fe, signal_strength); +} + +static int au8522_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct au8522_state *state = fe->demodulator_priv; + + if (state->current_modulation == VSB_8) + *ucblocks = au8522_readreg(state, 0x4087); + else + *ucblocks = au8522_readreg(state, 0x4543); + + return 0; +} + +static int au8522_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return au8522_read_ucblocks(fe, ber); +} + +static int au8522_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct au8522_state *state = fe->demodulator_priv; + + p->frequency = state->current_frequency; + p->u.vsb.modulation = state->current_modulation; + + return 0; +} + +static int au8522_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void au8522_release(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops au8522_ops; + +struct dvb_frontend *au8522_attach(const struct au8522_config *config, + struct i2c_adapter *i2c) +{ + struct au8522_state *state = NULL; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct au8522_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &au8522_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + if (au8522_init(&state->frontend) != 0) { + printk(KERN_ERR "%s: Failed to initialize correctly\n", + __func__); + goto error; + } + + /* Note: Leaving the I2C gate open here. */ + au8522_i2c_gate_ctrl(&state->frontend, 1); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(au8522_attach); + +static struct dvb_frontend_ops au8522_ops = { + + .info = { + .name = "Auvitek AU8522 QAM/8VSB Frontend", + .type = FE_ATSC, + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + + .init = au8522_init, + .sleep = au8522_sleep, + .i2c_gate_ctrl = au8522_i2c_gate_ctrl, + .set_frontend = au8522_set_frontend, + .get_frontend = au8522_get_frontend, + .get_tune_settings = au8522_get_tune_settings, + .read_status = au8522_read_status, + .read_ber = au8522_read_ber, + .read_signal_strength = au8522_read_signal_strength, + .read_snr = au8522_read_snr, + .read_ucblocks = au8522_read_ucblocks, + .release = au8522_release, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h new file mode 100644 index 00000000000..d7affa3cdb2 --- /dev/null +++ b/drivers/media/dvb/frontends/au8522.h @@ -0,0 +1,56 @@ +/* + Auvitek AU8522 QAM/8VSB demodulator driver + + Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef __AU8522_H__ +#define __AU8522_H__ + +#include <linux/dvb/frontend.h> + +struct au8522_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* Return lock status based on tuner lock, or demod lock */ +#define AU8522_TUNERLOCKING 0 +#define AU8522_DEMODLOCKING 1 + u8 status_mode; +}; + +#if defined(CONFIG_DVB_AU8522) || \ + (defined(CONFIG_DVB_AU8522_MODULE) && defined(MODULE)) +extern struct dvb_frontend *au8522_attach(const struct au8522_config *config, + struct i2c_adapter *i2c); +#else +static inline +struct dvb_frontend *au8522_attach(const struct au8522_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_AU8522 */ + +#endif /* __AU8522_H__ */ + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c index a913f49c062..d268e65e777 100644 --- a/drivers/media/dvb/frontends/bcm3510.c +++ b/drivers/media/dvb/frontends/bcm3510.c @@ -91,7 +91,7 @@ static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n", - __FUNCTION__, state->config->demod_address, reg, err); + __func__, state->config->demod_address, reg, err); return -EREMOTEIO; } @@ -110,7 +110,7 @@ static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 l if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n", - __FUNCTION__, state->config->demod_address, reg, err); + __func__, state->config->demod_address, reg, err); return -EREMOTEIO; } deb_i2c("i2c rd %02x: ",reg); diff --git a/drivers/media/dvb/frontends/bcm3510.h b/drivers/media/dvb/frontends/bcm3510.h index 7e4f95e1734..f4575c0cc44 100644 --- a/drivers/media/dvb/frontends/bcm3510.h +++ b/drivers/media/dvb/frontends/bcm3510.h @@ -41,7 +41,7 @@ extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config, static inline struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_BCM3510 diff --git a/drivers/media/dvb/frontends/bsbe1.h b/drivers/media/dvb/frontends/bsbe1.h index d8f65738e5d..5e431ebd089 100644 --- a/drivers/media/dvb/frontends/bsbe1.h +++ b/drivers/media/dvb/frontends/bsbe1.h @@ -1,5 +1,5 @@ /* - * bsbe1.h - ALPS BSBE1 tuner support (moved from av7110.c) + * bsbe1.h - ALPS BSBE1 tuner support * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -26,44 +26,24 @@ #define BSBE1_H static u8 alps_bsbe1_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, + 0x01, 0x15, /* XTAL = 4MHz, VCO = 352 MHz */ + 0x02, 0x30, /* MCLK = 88 MHz */ + 0x03, 0x00, /* ACR output 0 */ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ + 0x05, 0x05, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x00, /* DAC output 0 */ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x92, + 0x0c, 0x51, /* OP1/OP0 normal, val = 1 (LNB power on) */ + 0x0d, 0x82, /* DC offset compensation = on, beta_agc1 = 2 */ + 0x0f, 0x92, /* AGC1R */ + 0x10, 0x34, /* AGC2O */ + 0x11, 0x84, /* TLSR */ + 0x12, 0xb9, /* CFD */ + 0x15, 0xc9, /* lock detector threshold */ + 0x28, 0x00, /* out imp: normal, type: parallel, FEC mode: QPSK */ + 0x33, 0xfc, /* RS control */ + 0x34, 0x93, /* count viterbi bit errors per 2E18 bytes */ 0xff, 0xff }; @@ -100,11 +80,11 @@ static int alps_bsbe1_tuner_set_params(struct dvb_frontend* fe, struct dvb_front if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL; - div = (params->frequency + (125 - 1)) / 125; // round correctly + div = params->frequency / 1000; data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; - data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; + data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1; + data[3] = 0xe0; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); diff --git a/drivers/media/dvb/frontends/bsru6.h b/drivers/media/dvb/frontends/bsru6.h index e231cd84b3a..45a6dfd8ebb 100644 --- a/drivers/media/dvb/frontends/bsru6.h +++ b/drivers/media/dvb/frontends/bsru6.h @@ -133,7 +133,7 @@ static struct stv0299_config alps_bsru6_config = { .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, + .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, .set_symbol_rate = alps_bsru6_set_symbol_rate, diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c index 11a4968f18c..ace5cb17165 100644 --- a/drivers/media/dvb/frontends/cx22700.c +++ b/drivers/media/dvb/frontends/cx22700.c @@ -73,13 +73,13 @@ static int cx22700_writereg (struct cx22700_state* state, u8 reg, u8 data) u8 buf [] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); ret = i2c_transfer (state->i2c, &msg, 1); if (ret != 1) printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", - __FUNCTION__, reg, data, ret); + __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } @@ -92,7 +92,7 @@ static int cx22700_readreg (struct cx22700_state* state, u8 reg) struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); ret = i2c_transfer (state->i2c, msg, 2); @@ -105,7 +105,7 @@ static int cx22700_set_inversion (struct cx22700_state* state, int inversion) { u8 val; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); switch (inversion) { case INVERSION_AUTO: @@ -127,7 +127,7 @@ static int cx22700_set_tps (struct cx22700_state *state, struct dvb_ofdm_paramet static const u8 fec_tab [6] = { 0, 1, 2, 0, 3, 4 }; u8 val; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (p->code_rate_HP < FEC_1_2 || p->code_rate_HP > FEC_7_8) return -EINVAL; @@ -191,7 +191,7 @@ static int cx22700_get_tps (struct cx22700_state* state, struct dvb_ofdm_paramet FEC_5_6, FEC_7_8 }; u8 val; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (!(cx22700_readreg(state, 0x07) & 0x20)) /* tps valid? */ return -EAGAIN; diff --git a/drivers/media/dvb/frontends/cx22700.h b/drivers/media/dvb/frontends/cx22700.h index 7ac33690cdc..4757a930ca0 100644 --- a/drivers/media/dvb/frontends/cx22700.h +++ b/drivers/media/dvb/frontends/cx22700.h @@ -38,7 +38,7 @@ extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, static inline struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_CX22700 diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index 1dc164d5488..cc1db4e371c 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -48,7 +48,7 @@ struct cx22702_state { u8 prevUCBlocks; }; -static int debug = 0; +static int debug; #define dprintk if (debug) printk /* Register values to initialise the demod */ @@ -90,7 +90,7 @@ static int cx22702_writereg (struct cx22702_state* state, u8 reg, u8 data) if (ret != 1) printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", - __FUNCTION__, reg, data, ret); + __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } @@ -108,7 +108,7 @@ static u8 cx22702_readreg (struct cx22702_state* state, u8 reg) ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) - printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret); + printk("%s: readreg error (ret == %i)\n", __func__, ret); return b1[0]; } @@ -195,7 +195,7 @@ static int cx22702_get_tps (struct cx22702_state *state, struct dvb_ofdm_paramet static int cx22702_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct cx22702_state* state = fe->demodulator_priv; - dprintk ("%s(%d)\n", __FUNCTION__, enable); + dprintk ("%s(%d)\n", __func__, enable); if (enable) return cx22702_writereg (state, 0x0D, cx22702_readreg(state, 0x0D) & 0xfe); else @@ -228,7 +228,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet cx22702_writereg(state, 0x0C, cx22702_readreg(state, 0x0C) &0xcf ); break; default: - dprintk ("%s: invalid bandwidth\n",__FUNCTION__); + dprintk ("%s: invalid bandwidth\n",__func__); return -EINVAL; } @@ -250,7 +250,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B) & 0xfc ); cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40 ); cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */ - dprintk("%s: Autodetecting\n",__FUNCTION__); + dprintk("%s: Autodetecting\n",__func__); return 0; } @@ -261,7 +261,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet case QAM_16: val = (val&0xe7)|0x08; break; case QAM_64: val = (val&0xe7)|0x10; break; default: - dprintk ("%s: invalid constellation\n",__FUNCTION__); + dprintk ("%s: invalid constellation\n",__func__); return -EINVAL; } switch(p->u.ofdm.hierarchy_information) { @@ -270,7 +270,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet case HIERARCHY_2: val = (val&0xf8)|2; break; case HIERARCHY_4: val = (val&0xf8)|3; break; default: - dprintk ("%s: invalid hierarchy\n",__FUNCTION__); + dprintk ("%s: invalid hierarchy\n",__func__); return -EINVAL; } cx22702_writereg (state, 0x06, val); @@ -284,7 +284,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet case FEC_5_6: val = (val&0xc7)|0x18; break; case FEC_7_8: val = (val&0xc7)|0x20; break; default: - dprintk ("%s: invalid code_rate_HP\n",__FUNCTION__); + dprintk ("%s: invalid code_rate_HP\n",__func__); return -EINVAL; } switch(p->u.ofdm.code_rate_LP) { @@ -295,7 +295,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet case FEC_5_6: val = (val&0xf8)|3; break; case FEC_7_8: val = (val&0xf8)|4; break; default: - dprintk ("%s: invalid code_rate_LP\n",__FUNCTION__); + dprintk ("%s: invalid code_rate_LP\n",__func__); return -EINVAL; } cx22702_writereg (state, 0x07, val); @@ -307,14 +307,14 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet case GUARD_INTERVAL_1_8: val = (val&0xf3)|0x08; break; case GUARD_INTERVAL_1_4: val = (val&0xf3)|0x0c; break; default: - dprintk ("%s: invalid guard_interval\n",__FUNCTION__); + dprintk ("%s: invalid guard_interval\n",__func__); return -EINVAL; } switch(p->u.ofdm.transmission_mode) { case TRANSMISSION_MODE_2K: val = (val&0xfc); break; case TRANSMISSION_MODE_8K: val = (val&0xfc)|1; break; default: - dprintk ("%s: invalid transmission_mode\n",__FUNCTION__); + dprintk ("%s: invalid transmission_mode\n",__func__); return -EINVAL; } cx22702_writereg(state, 0x08, val); @@ -360,7 +360,7 @@ static int cx22702_read_status(struct dvb_frontend* fe, fe_status_t* status) reg23 = cx22702_readreg (state, 0x23); dprintk ("%s: status demod=0x%02x agc=0x%02x\n" - ,__FUNCTION__,reg0A,reg23); + ,__func__,reg0A,reg23); if(reg0A & 0x10) { *status |= FE_HAS_LOCK; diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h index 9cd64da6ee4..8af766a3155 100644 --- a/drivers/media/dvb/frontends/cx22702.h +++ b/drivers/media/dvb/frontends/cx22702.h @@ -48,7 +48,7 @@ extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, static inline struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_CX22702 diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index b03d8283c37..87ae29db024 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -121,7 +121,7 @@ static int cx24110_writereg (struct cx24110_state* state, int reg, int data) if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { dprintk ("%s: writereg error (err == %i, reg == 0x%02x," - " data == 0x%02x)\n", __FUNCTION__, err, reg, data); + " data == 0x%02x)\n", __func__, err, reg, data); return -EREMOTEIO; } @@ -247,7 +247,7 @@ static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate) static const u32 bands[]={5000000UL,15000000UL,90999000UL/2}; int i; - dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate); + dprintk("cx24110 debug: entering %s(%d)\n",__func__,srate); if (srate>90999000UL/2) srate=90999000UL/2; if (srate<500000) @@ -358,7 +358,7 @@ static int cx24110_initfe(struct dvb_frontend* fe) /* fixme (low): error handling */ int i; - dprintk("%s: init chip\n", __FUNCTION__); + dprintk("%s: init chip\n", __func__); for(i = 0; i < ARRAY_SIZE(cx24110_regdata); i++) { cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data); diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h index 0ca3af4db51..1792adb23c4 100644 --- a/drivers/media/dvb/frontends/cx24110.h +++ b/drivers/media/dvb/frontends/cx24110.h @@ -48,7 +48,7 @@ extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, static inline struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_CX24110 diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb/frontends/cx24113.h new file mode 100644 index 00000000000..5ab3dd11076 --- /dev/null +++ b/drivers/media/dvb/frontends/cx24113.h @@ -0,0 +1,48 @@ +/* + * Driver for Conexant CX24113/CX24128 Tuner (Satelite) + * + * Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef CX24113_H +#define CX24113_H + +struct dvb_frontend; + +struct cx24113_config { + u8 i2c_addr; /* 0x14 or 0x54 */ + + u32 xtal_khz; +}; + +/* TODO: #if defined(CONFIG_DVB_TUNER_CX24113) || \ + * (defined(CONFIG_DVB_TUNER_CX24113_MODULE) && defined(MODULE)) */ + +static inline struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, + const struct cx24113_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline void cx24113_agc_callback(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +#endif /* CX24113_H */ diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index d74fdbd6336..7f68d78c655 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -1,24 +1,26 @@ /* - Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver - - Copyright (C) 2005 Steven Toth <stoth@hauppauge.com> - - Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver + * + * Copyright (C) 2005 Steven Toth <stoth@hauppauge.com> + * + * Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc> + * + * Support for CX24123/CX24113-NIM by Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ #include <linux/slab.h> #include <linux/kernel.h> @@ -32,9 +34,16 @@ static int force_band; static int debug; + +#define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0) +#define err(args...) do { printk(KERN_ERR "CX24123: " args); } while (0) + #define dprintk(args...) \ do { \ - if (debug) printk (KERN_DEBUG "cx24123: " args); \ + if (debug) { \ + printk(KERN_DEBUG "CX24123: %s: ", __func__); \ + printk(args); \ + } \ } while (0) struct cx24123_state @@ -51,6 +60,10 @@ struct cx24123_state u32 pllarg; u32 FILTune; + struct i2c_adapter tuner_i2c_adapter; + + u8 demod_rev; + /* The Demod/Tuner can't easily provide these, we cache them */ u32 currentfreq; u32 currentsymbolrate; @@ -225,48 +238,52 @@ static struct { {0x67, 0x83}, /* Non-DCII symbol clock */ }; -static int cx24123_writereg(struct cx24123_state* state, int reg, int data) +static int cx24123_i2c_writereg(struct cx24123_state *state, + u8 i2c_addr, int reg, int data) { u8 buf[] = { reg, data }; - struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + struct i2c_msg msg = { + .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 + }; int err; - if (debug>1) - printk("cx24123: %s: write reg 0x%02x, value 0x%02x\n", - __FUNCTION__,reg, data); + /* printk(KERN_DEBUG "wr(%02x): %02x %02x\n", i2c_addr, reg, data); */ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { printk("%s: writereg error(err == %i, reg == 0x%02x," - " data == 0x%02x)\n", __FUNCTION__, err, reg, data); - return -EREMOTEIO; + " data == 0x%02x)\n", __func__, err, reg, data); + return err; } return 0; } -static int cx24123_readreg(struct cx24123_state* state, u8 reg) +static int cx24123_i2c_readreg(struct cx24123_state *state, u8 i2c_addr, u8 reg) { int ret; - u8 b0[] = { reg }; - u8 b1[] = { 0 }; + u8 b = 0; struct i2c_msg msg[] = { - { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } + { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &b, .len = 1 } }; ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { - printk("%s: reg=0x%x (error=%d)\n", __FUNCTION__, reg, ret); + err("%s: reg=0x%x (error=%d)\n", __func__, reg, ret); return ret; } - if (debug>1) - printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret); + /* printk(KERN_DEBUG "rd(%02x): %02x %02x\n", i2c_addr, reg, b); */ - return b1[0]; + return b; } +#define cx24123_readreg(state, reg) \ + cx24123_i2c_readreg(state, state->config->demod_address, reg) +#define cx24123_writereg(state, reg, val) \ + cx24123_i2c_writereg(state, state->config->demod_address, reg, val) + static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion) { u8 nom_reg = cx24123_readreg(state, 0x0e); @@ -274,17 +291,17 @@ static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_invers switch (inversion) { case INVERSION_OFF: - dprintk("%s: inversion off\n",__FUNCTION__); + dprintk("inversion off\n"); cx24123_writereg(state, 0x0e, nom_reg & ~0x80); cx24123_writereg(state, 0x10, auto_reg | 0x80); break; case INVERSION_ON: - dprintk("%s: inversion on\n",__FUNCTION__); + dprintk("inversion on\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x80); cx24123_writereg(state, 0x10, auto_reg | 0x80); break; case INVERSION_AUTO: - dprintk("%s: inversion auto\n",__FUNCTION__); + dprintk("inversion auto\n"); cx24123_writereg(state, 0x10, auto_reg & ~0x80); break; default: @@ -301,10 +318,10 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers val = cx24123_readreg(state, 0x1b) >> 7; if (val == 0) { - dprintk("%s: read inversion off\n",__FUNCTION__); + dprintk("read inversion off\n"); *inversion = INVERSION_OFF; } else { - dprintk("%s: read inversion on\n",__FUNCTION__); + dprintk("read inversion on\n"); *inversion = INVERSION_ON; } @@ -326,42 +343,42 @@ static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) switch (fec) { case FEC_1_2: - dprintk("%s: set FEC to 1/2\n",__FUNCTION__); + dprintk("set FEC to 1/2\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x01); cx24123_writereg(state, 0x0f, 0x02); break; case FEC_2_3: - dprintk("%s: set FEC to 2/3\n",__FUNCTION__); + dprintk("set FEC to 2/3\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x02); cx24123_writereg(state, 0x0f, 0x04); break; case FEC_3_4: - dprintk("%s: set FEC to 3/4\n",__FUNCTION__); + dprintk("set FEC to 3/4\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x03); cx24123_writereg(state, 0x0f, 0x08); break; case FEC_4_5: - dprintk("%s: set FEC to 4/5\n",__FUNCTION__); + dprintk("set FEC to 4/5\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x04); cx24123_writereg(state, 0x0f, 0x10); break; case FEC_5_6: - dprintk("%s: set FEC to 5/6\n",__FUNCTION__); + dprintk("set FEC to 5/6\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x05); cx24123_writereg(state, 0x0f, 0x20); break; case FEC_6_7: - dprintk("%s: set FEC to 6/7\n",__FUNCTION__); + dprintk("set FEC to 6/7\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x06); cx24123_writereg(state, 0x0f, 0x40); break; case FEC_7_8: - dprintk("%s: set FEC to 7/8\n",__FUNCTION__); + dprintk("set FEC to 7/8\n"); cx24123_writereg(state, 0x0e, nom_reg | 0x07); cx24123_writereg(state, 0x0f, 0x80); break; case FEC_AUTO: - dprintk("%s: set FEC to auto\n",__FUNCTION__); + dprintk("set FEC to auto\n"); cx24123_writereg(state, 0x0f, 0xfe); break; default: @@ -490,7 +507,8 @@ static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) tmp = cx24123_readreg(state, 0x0c) & ~0xe0; cx24123_writereg(state, 0x0c, tmp | sample_gain << 5); - dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", __FUNCTION__, srate, ratio, sample_rate, sample_gain); + dprintk("srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", + srate, ratio, sample_rate, sample_gain); return 0; } @@ -570,7 +588,7 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par struct cx24123_state *state = fe->demodulator_priv; unsigned long timeout; - dprintk("%s: pll writereg called, data=0x%08x\n",__FUNCTION__,data); + dprintk("pll writereg called, data=0x%08x\n", data); /* align the 21 bytes into to bit23 boundary */ data = data << 3; @@ -583,7 +601,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par cx24123_writereg(state, 0x22, (data >> 16) & 0xff); while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { if (time_after(jiffies, timeout)) { - printk("%s: demodulator is not responding, possibly hung, aborting.\n", __FUNCTION__); + err("%s: demodulator is not responding, "\ + "possibly hung, aborting.\n", __func__); return -EREMOTEIO; } msleep(10); @@ -594,7 +613,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par cx24123_writereg(state, 0x22, (data>>8) & 0xff ); while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { if (time_after(jiffies, timeout)) { - printk("%s: demodulator is not responding, possibly hung, aborting.\n", __FUNCTION__); + err("%s: demodulator is not responding, "\ + "possibly hung, aborting.\n", __func__); return -EREMOTEIO; } msleep(10); @@ -605,7 +625,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par cx24123_writereg(state, 0x22, (data) & 0xff ); while ((cx24123_readreg(state, 0x20) & 0x80)) { if (time_after(jiffies, timeout)) { - printk("%s: demodulator is not responding, possibly hung, aborting.\n", __FUNCTION__); + err("%s: demodulator is not responding," \ + "possibly hung, aborting.\n", __func__); return -EREMOTEIO; } msleep(10); @@ -626,7 +647,7 @@ static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_paramet dprintk("frequency=%i\n", p->frequency); if (cx24123_pll_calculate(fe, p) != 0) { - printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__); + err("%s: cx24123_pll_calcutate failed\n", __func__); return -EINVAL; } @@ -643,18 +664,38 @@ static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_paramet cx24123_writereg(state, 0x27, state->FILTune >> 2); cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3)); - dprintk("%s: pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg, - state->bandselectarg,state->pllarg); + dprintk("pll tune VCA=%d, band=%d, pll=%d\n", state->VCAarg, + state->bandselectarg, state->pllarg); return 0; } + +/* + * 0x23: + * [7:7] = BTI enabled + * [6:6] = I2C repeater enabled + * [5:5] = I2C repeater start + * [0:0] = BTI start + */ + +/* mode == 1 -> i2c-repeater, 0 -> bti */ +static int cx24123_repeater_mode(struct cx24123_state *state, u8 mode, u8 start) +{ + u8 r = cx24123_readreg(state, 0x23) & 0x1e; + if (mode) + r |= (1 << 6) | (start << 5); + else + r |= (1 << 7) | (start); + return cx24123_writereg(state, 0x23, r); +} + static int cx24123_initfe(struct dvb_frontend* fe) { struct cx24123_state *state = fe->demodulator_priv; int i; - dprintk("%s: init frontend\n",__FUNCTION__); + dprintk("init frontend\n"); /* Configure the demod to a good set of defaults */ for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++) @@ -664,6 +705,9 @@ static int cx24123_initfe(struct dvb_frontend* fe) if(state->config->lnb_polarity) cx24123_writereg(state, 0x32, cx24123_readreg(state, 0x32) | 0x02); + if (state->config->dont_use_pll) + cx24123_repeater_mode(state, 1, 0); + return 0; } @@ -676,10 +720,10 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage switch (voltage) { case SEC_VOLTAGE_13: - dprintk("%s: setting voltage 13V\n", __FUNCTION__); + dprintk("setting voltage 13V\n"); return cx24123_writereg(state, 0x29, val & 0x7f); case SEC_VOLTAGE_18: - dprintk("%s: setting voltage 18V\n", __FUNCTION__); + dprintk("setting voltage 18V\n"); return cx24123_writereg(state, 0x29, val | 0x80); case SEC_VOLTAGE_OFF: /* already handled in cx88-dvb */ @@ -697,7 +741,8 @@ static void cx24123_wait_for_diseqc(struct cx24123_state *state) unsigned long timeout = jiffies + msecs_to_jiffies(200); while (!(cx24123_readreg(state, 0x29) & 0x40)) { if(time_after(jiffies, timeout)) { - printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__); + err("%s: diseqc queue not ready, " \ + "command may be lost.\n", __func__); break; } msleep(10); @@ -709,7 +754,7 @@ static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma struct cx24123_state *state = fe->demodulator_priv; int i, val, tone; - dprintk("%s:\n",__FUNCTION__); + dprintk("\n"); /* stop continuous tone if enabled */ tone = cx24123_readreg(state, 0x29); @@ -744,7 +789,7 @@ static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t struct cx24123_state *state = fe->demodulator_priv; int val, tone; - dprintk("%s:\n", __FUNCTION__); + dprintk("\n"); /* stop continuous tone if enabled */ tone = cx24123_readreg(state, 0x29); @@ -778,13 +823,21 @@ static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status) { struct cx24123_state *state = fe->demodulator_priv; - int sync = cx24123_readreg(state, 0x14); - int lock = cx24123_readreg(state, 0x20); *status = 0; - if (lock & 0x01) - *status |= FE_HAS_SIGNAL; + if (state->config->dont_use_pll) { + u32 tun_status = 0; + if (fe->ops.tuner_ops.get_status) + fe->ops.tuner_ops.get_status(fe, &tun_status); + if (tun_status & TUNER_STATUS_LOCKED) + *status |= FE_HAS_SIGNAL; + } else { + int lock = cx24123_readreg(state, 0x20); + if (lock & 0x01) + *status |= FE_HAS_SIGNAL; + } + if (sync & 0x02) *status |= FE_HAS_CARRIER; /* Phase locked */ if (sync & 0x04) @@ -803,7 +856,7 @@ static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status) * Configured to return the measurement of errors in blocks, because no UCBLOCKS value * is available, so this value doubles up to satisfy both measurements */ -static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber) +static int cx24123_read_ber(struct dvb_frontend *fe, u32 *ber) { struct cx24123_state *state = fe->demodulator_priv; @@ -813,23 +866,24 @@ static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber) (cx24123_readreg(state, 0x1d) << 8 | cx24123_readreg(state, 0x1e)); - dprintk("%s: BER = %d\n",__FUNCTION__,*ber); + dprintk("BER = %d\n", *ber); return 0; } -static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +static int cx24123_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { struct cx24123_state *state = fe->demodulator_priv; *signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */ - dprintk("%s: Signal strength = %d\n",__FUNCTION__,*signal_strength); + dprintk("Signal strength = %d\n", *signal_strength); return 0; } -static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr) +static int cx24123_read_snr(struct dvb_frontend *fe, u16 *snr) { struct cx24123_state *state = fe->demodulator_priv; @@ -838,16 +892,17 @@ static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr) *snr = 65535 - (((u16)cx24123_readreg(state, 0x18) << 8) | (u16)cx24123_readreg(state, 0x19)); - dprintk("%s: read S/N index = %d\n",__FUNCTION__,*snr); + dprintk("read S/N index = %d\n", *snr); return 0; } -static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24123_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24123_state *state = fe->demodulator_priv; - dprintk("%s: set_frontend\n",__FUNCTION__); + dprintk("\n"); if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); @@ -858,13 +913,22 @@ static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par cx24123_set_inversion(state, p->inversion); cx24123_set_fec(state, p->u.qpsk.fec_inner); cx24123_set_symbolrate(state, p->u.qpsk.symbol_rate); - cx24123_pll_tune(fe, p); + + if (!state->config->dont_use_pll) + cx24123_pll_tune(fe, p); + else if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe, p); + else + err("it seems I don't have a tuner..."); /* Enable automatic aquisition and reset cycle */ cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07)); cx24123_writereg(state, 0x00, 0x10); cx24123_writereg(state, 0x00, 0); + if (state->config->agc_callback) + state->config->agc_callback(fe); + return 0; } @@ -872,14 +936,14 @@ static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par { struct cx24123_state *state = fe->demodulator_priv; - dprintk("%s: get_frontend\n",__FUNCTION__); + dprintk("\n"); if (cx24123_get_inversion(state, &p->inversion) != 0) { - printk("%s: Failed to get inversion status\n",__FUNCTION__); + err("%s: Failed to get inversion status\n", __func__); return -EREMOTEIO; } if (cx24123_get_fec(state, &p->u.qpsk.fec_inner) != 0) { - printk("%s: Failed to get fec status\n",__FUNCTION__); + err("%s: Failed to get fec status\n", __func__); return -EREMOTEIO; } p->frequency = state->currentfreq; @@ -900,13 +964,13 @@ static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) switch (tone) { case SEC_TONE_ON: - dprintk("%s: setting tone on\n", __FUNCTION__); + dprintk("setting tone on\n"); return cx24123_writereg(state, 0x29, val | 0x10); case SEC_TONE_OFF: - dprintk("%s: setting tone off\n",__FUNCTION__); + dprintk("setting tone off\n"); return cx24123_writereg(state, 0x29, val & 0xef); default: - printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone); + err("CASE reached default with tone=%d\n", tone); return -EINVAL; } @@ -939,47 +1003,86 @@ static int cx24123_get_algo(struct dvb_frontend *fe) static void cx24123_release(struct dvb_frontend* fe) { struct cx24123_state* state = fe->demodulator_priv; - dprintk("%s\n",__FUNCTION__); + dprintk("\n"); + i2c_del_adapter(&state->tuner_i2c_adapter); kfree(state); } +static int cx24123_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct cx24123_state *state = i2c_get_adapdata(i2c_adap); + /* this repeater closes after the first stop */ + cx24123_repeater_mode(state, 1, 1); + return i2c_transfer(state->i2c, msg, num); +} + +static u32 cx24123_tuner_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm cx24123_tuner_i2c_algo = { + .master_xfer = cx24123_tuner_i2c_tuner_xfer, + .functionality = cx24123_tuner_i2c_func, +}; + +struct i2c_adapter * + cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + struct cx24123_state *state = fe->demodulator_priv; + return &state->tuner_i2c_adapter; +} +EXPORT_SYMBOL(cx24123_get_tuner_i2c_adapter); + static struct dvb_frontend_ops cx24123_ops; struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, struct i2c_adapter* i2c) { - struct cx24123_state* state = NULL; - int ret; - - dprintk("%s\n",__FUNCTION__); + struct cx24123_state *state = + kzalloc(sizeof(struct cx24123_state), GFP_KERNEL); + dprintk("\n"); /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct cx24123_state), GFP_KERNEL); if (state == NULL) { - printk("Unable to kmalloc\n"); + err("Unable to kmalloc\n"); goto error; } /* setup the state */ state->config = config; state->i2c = i2c; - state->VCAarg = 0; - state->VGAarg = 0; - state->bandselectarg = 0; - state->pllarg = 0; - state->currentfreq = 0; - state->currentsymbolrate = 0; /* check if the demod is there */ - ret = cx24123_readreg(state, 0x00); - if ((ret != 0xd1) && (ret != 0xe1)) { - printk("Version != d1 or e1\n"); + state->demod_rev = cx24123_readreg(state, 0x00); + switch (state->demod_rev) { + case 0xe1: info("detected CX24123C\n"); break; + case 0xd1: info("detected CX24123\n"); break; + default: + err("wrong demod revision: %x\n", state->demod_rev); goto error; } /* create dvb_frontend */ memcpy(&state->frontend.ops, &cx24123_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; + + /* create tuner i2c adapter */ + if (config->dont_use_pll) + cx24123_repeater_mode(state, 1, 0); + + strncpy(state->tuner_i2c_adapter.name, + "CX24123 tuner I2C bus", I2C_NAME_SIZE); + state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL, + state->tuner_i2c_adapter.algo = &cx24123_tuner_i2c_algo; + state->tuner_i2c_adapter.algo_data = NULL; + i2c_set_adapdata(&state->tuner_i2c_adapter, state); + if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { + err("tuner i2c bus could not be initialized\n"); + goto error; + } + return &state->frontend; error: @@ -1029,7 +1132,8 @@ MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); module_param(force_band, int, 0644); MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off)."); -MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware"); +MODULE_DESCRIPTION("DVB Frontend module for Conexant " \ + "CX24123/CX24109/CX24113 hardware"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h index 84f9e4f5c15..81ebc3d2f19 100644 --- a/drivers/media/dvb/frontends/cx24123.h +++ b/drivers/media/dvb/frontends/cx24123.h @@ -33,16 +33,27 @@ struct cx24123_config /* 0 = LNB voltage normal, 1 = LNB voltage inverted */ int lnb_polarity; + + /* this device has another tuner */ + u8 dont_use_pll; + void (*agc_callback) (struct dvb_frontend *); }; #if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE)) -extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, - struct i2c_adapter* i2c); +extern struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, + struct i2c_adapter *i2c); +extern struct i2c_adapter *cx24123_get_tuner_i2c_adapter(struct dvb_frontend *); #else -static inline struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *cx24123_attach( + const struct cx24123_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static struct i2c_adapter * + cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_CX24123 diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 786e37d3388..3eedfdf505b 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -37,7 +37,20 @@ struct dib0070_config { u8 flip_chip; }; -extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg); +#else +static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open); extern u16 dib0070_wbd_offset(struct dvb_frontend *); diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h index a6d3854a67b..ba917359fa6 100644 --- a/drivers/media/dvb/frontends/dib3000.h +++ b/drivers/media/dvb/frontends/dib3000.h @@ -48,7 +48,7 @@ extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config static inline struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config, struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_DIB3000MB diff --git a/drivers/media/dvb/frontends/dib3000mc.h b/drivers/media/dvb/frontends/dib3000mc.h index 72d4757601d..4142ed7a47d 100644 --- a/drivers/media/dvb/frontends/dib3000mc.h +++ b/drivers/media/dvb/frontends/dib3000mc.h @@ -44,7 +44,7 @@ extern struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i #else static inline struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_DIB3000MC diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 47c23e29753..1a0142e0d74 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1168,7 +1168,7 @@ static int dib7000p_set_frontend(struct dvb_frontend* fe, ret = dib7000p_tune(fe, fep); /* make this a config parameter */ - dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO); + dib7000p_set_output_mode(state, state->cfg.output_mode); return ret; } @@ -1330,6 +1330,12 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, st->gpio_val = cfg->gpio_val; st->gpio_dir = cfg->gpio_dir; + /* Ensure the output mode remains at the previous default if it's + * not specifically set by the caller. + */ + if (st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) + st->cfg.output_mode = OUTMODE_MPEG2_FIFO; + demod = &st->demod; demod->demodulator_priv = st; memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops)); diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h index eefcac8b524..07c4d12ed5b 100644 --- a/drivers/media/dvb/frontends/dib7000p.h +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -31,11 +31,26 @@ struct dib7000p_config { u8 spur_protect; int (*agc_control) (struct dvb_frontend *, u8 before); + + u8 output_mode; }; #define DEFAULT_DIB7000P_I2C_ADDRESS 18 -extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg); +#else +static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 8c8d7342d0b..a054894ff48 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -44,14 +44,10 @@ struct dvb_pll_priv { static unsigned int dvb_pll_devcount; -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); -static unsigned int input[DVB_PLL_MAX] = { [ 0 ... (DVB_PLL_MAX-1) ] = 0 }; -module_param_array(input, int, NULL, 0644); -MODULE_PARM_DESC(input,"specify rf input choice, 0 for autoselect (default)"); - static unsigned int id[DVB_PLL_MAX] = { [ 0 ... (DVB_PLL_MAX-1) ] = DVB_PLL_UNDEFINED }; module_param_array(id, int, NULL, 0644); @@ -80,23 +76,6 @@ struct dvb_pll_desc { /* ----------------------------------------------------------- */ /* descriptions */ -/* Set AGC TOP value to 103 dBuV: - 0x80 = Control Byte - 0x40 = 250 uA charge pump (irrelevant) - 0x18 = Aux Byte to follow - 0x06 = 64.5 kHz divider (irrelevant) - 0x01 = Disable Vt (aka sleep) - - 0x00 = AGC Time constant 2s Iagc = 300 nA (vs 0x80 = 9 nA) - 0x50 = AGC Take over point = 103 dBuV */ -static u8 tua603x_agc103[] = { 2, 0x80|0x40|0x18|0x06|0x01, 0x00|0x50 }; - -/* 0x04 = 166.67 kHz divider - - 0x80 = AGC Time constant 50ms Iagc = 9 uA - 0x20 = AGC Take over point = 112 dBuV */ -static u8 tua603x_agc112[] = { 2, 0x80|0x40|0x18|0x04|0x01, 0x80|0x20 }; - static struct dvb_pll_desc dvb_pll_thomson_dtt7579 = { .name = "Thomson dtt7579", .min = 177000000, @@ -112,19 +91,6 @@ static struct dvb_pll_desc dvb_pll_thomson_dtt7579 = { }, }; -static struct dvb_pll_desc dvb_pll_thomson_dtt7610 = { - .name = "Thomson dtt7610", - .min = 44000000, - .max = 958000000, - .iffreq= 44000000, - .count = 3, - .entries = { - { 157250000, 62500, 0x8e, 0x39 }, - { 454000000, 62500, 0x8e, 0x3a }, - { 999999999, 62500, 0x8e, 0x3c }, - }, -}; - static void thomson_dtt759x_bw(struct dvb_frontend *fe, u8 *buf, const struct dvb_frontend_parameters *params) { @@ -165,34 +131,6 @@ static struct dvb_pll_desc dvb_pll_lg_z201 = { }, }; -static struct dvb_pll_desc dvb_pll_microtune_4042 = { - .name = "Microtune 4042 FI5", - .min = 57000000, - .max = 858000000, - .iffreq= 44000000, - .count = 3, - .entries = { - { 162000000, 62500, 0x8e, 0xa1 }, - { 457000000, 62500, 0x8e, 0x91 }, - { 999999999, 62500, 0x8e, 0x31 }, - }, -}; - -static struct dvb_pll_desc dvb_pll_thomson_dtt761x = { - /* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */ - .name = "Thomson dtt761x", - .min = 57000000, - .max = 863000000, - .iffreq= 44000000, - .count = 3, - .initdata = tua603x_agc103, - .entries = { - { 147000000, 62500, 0x8e, 0x39 }, - { 417000000, 62500, 0x8e, 0x3a }, - { 999999999, 62500, 0x8e, 0x3c }, - }, -}; - static struct dvb_pll_desc dvb_pll_unknown_1 = { .name = "unknown 1", /* used by dntv live dvb-t */ .min = 174000000, @@ -301,54 +239,6 @@ static struct dvb_pll_desc dvb_pll_tua6034 = { }, }; -/* Infineon TUA6034 - * used in LG TDVS-H061F, LG TDVS-H062F and LG TDVS-H064F - */ -static struct dvb_pll_desc dvb_pll_lg_tdvs_h06xf = { - .name = "LG TDVS-H06xF", - .min = 54000000, - .max = 863000000, - .iffreq= 44000000, - .initdata = tua603x_agc103, - .count = 3, - .entries = { - { 165000000, 62500, 0xce, 0x01 }, - { 450000000, 62500, 0xce, 0x02 }, - { 999999999, 62500, 0xce, 0x04 }, - }, -}; - -/* Philips FMD1216ME - * used in Medion Hybrid PCMCIA card and USB Box - */ -static void fmd1216me_bw(struct dvb_frontend *fe, u8 *buf, - const struct dvb_frontend_parameters *params) -{ - if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ && - params->frequency >= 158870000) - buf[3] |= 0x08; -} - -static struct dvb_pll_desc dvb_pll_fmd1216me = { - .name = "Philips FMD1216ME", - .min = 50870000, - .max = 858000000, - .iffreq= 36125000, - .set = fmd1216me_bw, - .initdata = tua603x_agc112, - .sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 }, - .count = 7, - .entries = { - { 143870000, 166667, 0xbc, 0x41 }, - { 158870000, 166667, 0xf4, 0x41 }, - { 329870000, 166667, 0xbc, 0x42 }, - { 441870000, 166667, 0xf4, 0x42 }, - { 625870000, 166667, 0xbc, 0x44 }, - { 803870000, 166667, 0xf4, 0x44 }, - { 999999999, 166667, 0xfc, 0x44 }, - } -}; - /* ALPS TDED4 * used in Nebula-Cards and USB boxes */ @@ -391,55 +281,6 @@ static struct dvb_pll_desc dvb_pll_tdhu2 = { } }; -/* Philips TUV1236D - * used in ATI HDTV Wonder - */ -static void tuv1236d_rf(struct dvb_frontend *fe, u8 *buf, - const struct dvb_frontend_parameters *params) -{ - struct dvb_pll_priv *priv = fe->tuner_priv; - unsigned int new_rf = input[priv->nr]; - - if ((new_rf == 0) || (new_rf > 2)) { - switch (params->u.vsb.modulation) { - case QAM_64: - case QAM_256: - new_rf = 1; - break; - case VSB_8: - default: - new_rf = 2; - } - } - - switch (new_rf) { - case 1: - buf[3] |= 0x08; - break; - case 2: - buf[3] &= ~0x08; - break; - default: - printk(KERN_WARNING - "%s: unhandled rf input selection: %d", - __FUNCTION__, new_rf); - } -} - -static struct dvb_pll_desc dvb_pll_tuv1236d = { - .name = "Philips TUV1236D", - .min = 54000000, - .max = 864000000, - .iffreq= 44000000, - .set = tuv1236d_rf, - .count = 3, - .entries = { - { 157250000, 62500, 0xc6, 0x41 }, - { 454000000, 62500, 0xc6, 0x42 }, - { 999999999, 62500, 0xc6, 0x44 }, - }, -}; - /* Samsung TBMV30111IN / TBMV30712IN1 * used in Air2PC ATSC - 2nd generation (nxt2002) */ @@ -476,64 +317,6 @@ static struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = { }, }; -/* - * Philips TD1316 Tuner. - */ -static void td1316_bw(struct dvb_frontend *fe, u8 *buf, - const struct dvb_frontend_parameters *params) -{ - u8 band; - - /* determine band */ - if (params->frequency < 161000000) - band = 1; - else if (params->frequency < 444000000) - band = 2; - else - band = 4; - - buf[3] |= band; - - /* setup PLL filter */ - if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) - buf[3] |= 1 << 3; -} - -static struct dvb_pll_desc dvb_pll_philips_td1316 = { - .name = "Philips TD1316", - .min = 87000000, - .max = 895000000, - .iffreq= 36166667, - .set = td1316_bw, - .count = 9, - .entries = { - { 93834000, 166667, 0xca, 0x60}, - { 123834000, 166667, 0xca, 0xa0}, - { 163834000, 166667, 0xca, 0xc0}, - { 253834000, 166667, 0xca, 0x60}, - { 383834000, 166667, 0xca, 0xa0}, - { 443834000, 166667, 0xca, 0xc0}, - { 583834000, 166667, 0xca, 0x60}, - { 793834000, 166667, 0xca, 0xa0}, - { 858834000, 166667, 0xca, 0xe0}, - }, -}; - -/* FE6600 used on DViCO Hybrid */ -static struct dvb_pll_desc dvb_pll_thomson_fe6600 = { - .name = "Thomson FE6600", - .min = 44250000, - .max = 858000000, - .iffreq= 36125000, - .count = 4, - .entries = { - { 250000000, 166667, 0xb4, 0x12 }, - { 455000000, 166667, 0xfe, 0x11 }, - { 775500000, 166667, 0xbc, 0x18 }, - { 999999999, 166667, 0xf4, 0x18 }, - } -}; - static void opera1_bw(struct dvb_frontend *fe, u8 *buf, const struct dvb_frontend_parameters *params) { @@ -560,50 +343,23 @@ static struct dvb_pll_desc dvb_pll_opera1 = { } }; -/* Philips FCV1236D - */ -static struct dvb_pll_desc dvb_pll_fcv1236d = { -/* Bit_0: RF Input select - * Bit_1: 0=digital, 1=analog - */ - .name = "Philips FCV1236D", - .min = 53000000, - .max = 803000000, - .iffreq= 44000000, - .count = 3, - .entries = { - { 159000000, 62500, 0x8e, 0xa0 }, - { 453000000, 62500, 0x8e, 0x90 }, - { 999999999, 62500, 0x8e, 0x30 }, - }, -}; - /* ----------------------------------------------------------- */ static struct dvb_pll_desc *pll_list[] = { [DVB_PLL_UNDEFINED] = NULL, [DVB_PLL_THOMSON_DTT7579] = &dvb_pll_thomson_dtt7579, [DVB_PLL_THOMSON_DTT759X] = &dvb_pll_thomson_dtt759x, - [DVB_PLL_THOMSON_DTT7610] = &dvb_pll_thomson_dtt7610, [DVB_PLL_LG_Z201] = &dvb_pll_lg_z201, - [DVB_PLL_MICROTUNE_4042] = &dvb_pll_microtune_4042, - [DVB_PLL_THOMSON_DTT761X] = &dvb_pll_thomson_dtt761x, [DVB_PLL_UNKNOWN_1] = &dvb_pll_unknown_1, [DVB_PLL_TUA6010XS] = &dvb_pll_tua6010xs, [DVB_PLL_ENV57H1XD5] = &dvb_pll_env57h1xd5, [DVB_PLL_TUA6034] = &dvb_pll_tua6034, - [DVB_PLL_LG_TDVS_H06XF] = &dvb_pll_lg_tdvs_h06xf, [DVB_PLL_TDA665X] = &dvb_pll_tda665x, - [DVB_PLL_FMD1216ME] = &dvb_pll_fmd1216me, [DVB_PLL_TDED4] = &dvb_pll_tded4, - [DVB_PLL_TUV1236D] = &dvb_pll_tuv1236d, [DVB_PLL_TDHU2] = &dvb_pll_tdhu2, [DVB_PLL_SAMSUNG_TBMV] = &dvb_pll_samsung_tbmv, [DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261, - [DVB_PLL_PHILIPS_TD1316] = &dvb_pll_philips_td1316, - [DVB_PLL_THOMSON_FE6600] = &dvb_pll_thomson_fe6600, [DVB_PLL_OPERA1] = &dvb_pll_opera1, - [DVB_PLL_FCV1236D] = &dvb_pll_fcv1236d, }; /* ----------------------------------------------------------- */ @@ -849,20 +605,6 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, id[priv->nr] == pll_desc_id ? "insmod option" : "autodetected"); } - if ((debug) || (input[priv->nr] > 0)) { - printk("dvb-pll[%d]", priv->nr); - if (i2c != NULL) - printk(" %d-%04x", i2c_adapter_id(i2c), pll_addr); - printk(": tuner rf input will be "); - switch (input[priv->nr]) { - case 0: - printk("autoselected\n"); - break; - default: - printk("set to input %d (insmod option)\n", - input[priv->nr]); - } - } return fe; } diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index e93a8104052..872ca29e7cf 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -11,26 +11,17 @@ #define DVB_PLL_UNDEFINED 0 #define DVB_PLL_THOMSON_DTT7579 1 #define DVB_PLL_THOMSON_DTT759X 2 -#define DVB_PLL_THOMSON_DTT7610 3 -#define DVB_PLL_LG_Z201 4 -#define DVB_PLL_MICROTUNE_4042 5 -#define DVB_PLL_THOMSON_DTT761X 6 -#define DVB_PLL_UNKNOWN_1 7 -#define DVB_PLL_TUA6010XS 8 -#define DVB_PLL_ENV57H1XD5 9 -#define DVB_PLL_TUA6034 10 -#define DVB_PLL_LG_TDVS_H06XF 11 -#define DVB_PLL_TDA665X 12 -#define DVB_PLL_FMD1216ME 13 -#define DVB_PLL_TDED4 14 -#define DVB_PLL_TUV1236D 15 -#define DVB_PLL_TDHU2 16 -#define DVB_PLL_SAMSUNG_TBMV 17 -#define DVB_PLL_PHILIPS_SD1878_TDA8261 18 -#define DVB_PLL_PHILIPS_TD1316 19 -#define DVB_PLL_THOMSON_FE6600 20 -#define DVB_PLL_OPERA1 21 -#define DVB_PLL_FCV1236D 22 +#define DVB_PLL_LG_Z201 3 +#define DVB_PLL_UNKNOWN_1 4 +#define DVB_PLL_TUA6010XS 5 +#define DVB_PLL_ENV57H1XD5 6 +#define DVB_PLL_TUA6034 7 +#define DVB_PLL_TDA665X 8 +#define DVB_PLL_TDED4 9 +#define DVB_PLL_TDHU2 10 +#define DVB_PLL_SAMSUNG_TBMV 11 +#define DVB_PLL_PHILIPS_SD1878_TDA8261 12 +#define DVB_PLL_OPERA1 13 /** * Attach a dvb-pll to the supplied frontend structure. @@ -52,7 +43,7 @@ static inline struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, unsigned int pll_desc_id) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/isl6405.c b/drivers/media/dvb/frontends/isl6405.c new file mode 100644 index 00000000000..33d33f4d886 --- /dev/null +++ b/drivers/media/dvb/frontends/isl6405.c @@ -0,0 +1,164 @@ +/* + * isl6405.c - driver for dual lnb supply and control ic ISL6405 + * + * Copyright (C) 2008 Hartmut Hackmann + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include "dvb_frontend.h" +#include "isl6405.h" + +struct isl6405 { + u8 config; + u8 override_or; + u8 override_and; + struct i2c_adapter *i2c; + u8 i2c_addr; +}; + +static int isl6405_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct isl6405 *isl6405 = (struct isl6405 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6405->i2c_addr, .flags = 0, + .buf = &isl6405->config, + .len = sizeof(isl6405->config) }; + + if (isl6405->override_or & 0x80) { + isl6405->config &= ~(ISL6405_VSEL2 | ISL6405_EN2); + switch (voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + isl6405->config |= ISL6405_EN2; + break; + case SEC_VOLTAGE_18: + isl6405->config |= (ISL6405_EN2 | ISL6405_VSEL2); + break; + default: + return -EINVAL; + } + } else { + isl6405->config &= ~(ISL6405_VSEL1 | ISL6405_EN1); + switch (voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + isl6405->config |= ISL6405_EN1; + break; + case SEC_VOLTAGE_18: + isl6405->config |= (ISL6405_EN1 | ISL6405_VSEL1); + break; + default: + return -EINVAL; + }; + } + isl6405->config |= isl6405->override_or; + isl6405->config &= isl6405->override_and; + + return (i2c_transfer(isl6405->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int isl6405_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct isl6405 *isl6405 = (struct isl6405 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6405->i2c_addr, .flags = 0, + .buf = &isl6405->config, + .len = sizeof(isl6405->config) }; + + if (isl6405->override_or & 0x80) { + if (arg) + isl6405->config |= ISL6405_LLC2; + else + isl6405->config &= ~ISL6405_LLC2; + } else { + if (arg) + isl6405->config |= ISL6405_LLC1; + else + isl6405->config &= ~ISL6405_LLC1; + } + isl6405->config |= isl6405->override_or; + isl6405->config &= isl6405->override_and; + + return (i2c_transfer(isl6405->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void isl6405_release(struct dvb_frontend *fe) +{ + /* power off */ + isl6405_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free */ + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, + u8 i2c_addr, u8 override_set, u8 override_clear) +{ + struct isl6405 *isl6405 = kmalloc(sizeof(struct isl6405), GFP_KERNEL); + if (!isl6405) + return NULL; + + /* default configuration */ + if (override_set & 0x80) + isl6405->config = ISL6405_ISEL2; + else + isl6405->config = ISL6405_ISEL1; + isl6405->i2c = i2c; + isl6405->i2c_addr = i2c_addr; + fe->sec_priv = isl6405; + + /* bits which should be forced to '1' */ + isl6405->override_or = override_set; + + /* bits which should be forced to '0' */ + isl6405->override_and = ~override_clear; + + /* detect if it is present or not */ + if (isl6405_set_voltage(fe, SEC_VOLTAGE_OFF)) { + kfree(isl6405); + fe->sec_priv = NULL; + return NULL; + } + + /* install release callback */ + fe->ops.release_sec = isl6405_release; + + /* override frontend ops */ + fe->ops.set_voltage = isl6405_set_voltage; + fe->ops.enable_high_lnb_voltage = isl6405_enable_high_lnb_voltage; + + return fe; +} +EXPORT_SYMBOL(isl6405_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6405"); +MODULE_AUTHOR("Hartmut Hackmann & Oliver Endriss"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/isl6405.h b/drivers/media/dvb/frontends/isl6405.h new file mode 100644 index 00000000000..1c793d37576 --- /dev/null +++ b/drivers/media/dvb/frontends/isl6405.h @@ -0,0 +1,74 @@ +/* + * isl6405.h - driver for dual lnb supply and control ic ISL6405 + * + * Copyright (C) 2008 Hartmut Hackmann + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef _ISL6405_H +#define _ISL6405_H + +#include <linux/dvb/frontend.h> + +/* system register bits */ + +/* this bit selects register (control) 1 or 2 + note that the bit maps are different */ + +#define ISL6405_SR 0x80 + +/* SR = 0 */ +#define ISL6405_OLF1 0x01 +#define ISL6405_EN1 0x02 +#define ISL6405_VSEL1 0x04 +#define ISL6405_LLC1 0x08 +#define ISL6405_ENT1 0x10 +#define ISL6405_ISEL1 0x20 +#define ISL6405_DCL 0x40 + +/* SR = 1 */ +#define ISL6405_OLF2 0x01 +#define ISL6405_OTF 0x02 +#define ISL6405_EN2 0x04 +#define ISL6405_VSEL2 0x08 +#define ISL6405_LLC2 0x10 +#define ISL6405_ENT2 0x20 +#define ISL6405_ISEL2 0x40 + +#if defined(CONFIG_DVB_ISL6405) || (defined(CONFIG_DVB_ISL6405_MODULE) && defined(MODULE)) +/* override_set and override_clear control which system register bits (above) + * to always set & clear + */ +extern struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, + u8 i2c_addr, u8 override_set, u8 override_clear); +#else +static inline struct dvb_frontend *isl6405_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_ISL6405 */ + +#endif diff --git a/drivers/media/dvb/frontends/isl6421.h b/drivers/media/dvb/frontends/isl6421.h index ea7f78a7d3c..47e4518a042 100644 --- a/drivers/media/dvb/frontends/isl6421.h +++ b/drivers/media/dvb/frontends/isl6421.h @@ -47,7 +47,7 @@ extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_a static inline struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, u8 override_set, u8 override_clear) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_ISL6421 diff --git a/drivers/media/dvb/frontends/itd1000.c b/drivers/media/dvb/frontends/itd1000.c new file mode 100644 index 00000000000..600dad6b41e --- /dev/null +++ b/drivers/media/dvb/frontends/itd1000.c @@ -0,0 +1,400 @@ +/* + * Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite" + * + * Copyright (c) 2007-8 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/delay.h> +#include <linux/dvb/frontend.h> +#include <linux/i2c.h> + +#include "dvb_frontend.h" + +#include "itd1000.h" +#include "itd1000_priv.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define deb(args...) do { \ + if (debug) { \ + printk(KERN_DEBUG "ITD1000: " args);\ + printk("\n"); \ + } \ +} while (0) + +#define warn(args...) do { \ + printk(KERN_WARNING "ITD1000: " args); \ + printk("\n"); \ +} while (0) + +#define info(args...) do { \ + printk(KERN_INFO "ITD1000: " args); \ + printk("\n"); \ +} while (0) + +/* don't write more than one byte with flexcop behind */ +static int itd1000_write_regs(struct itd1000_state *state, u8 reg, u8 v[], u8 len) +{ + u8 buf[1+len]; + struct i2c_msg msg = { + .addr = state->cfg->i2c_address, .flags = 0, .buf = buf, .len = len+1 + }; + buf[0] = reg; + memcpy(&buf[1], v, len); + + /* deb("wr %02x: %02x", reg, v[0]); */ + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + printk(KERN_WARNING "itd1000 I2C write failed\n"); + return -EREMOTEIO; + } + return 0; +} + +static int itd1000_read_reg(struct itd1000_state *state, u8 reg) +{ + u8 val; + struct i2c_msg msg[2] = { + { .addr = state->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = &val, .len = 1 }, + }; + + /* ugly flexcop workaround */ + itd1000_write_regs(state, (reg - 1) & 0xff, &state->shadow[(reg - 1) & 0xff], 1); + + if (i2c_transfer(state->i2c, msg, 2) != 2) { + warn("itd1000 I2C read failed"); + return -EREMOTEIO; + } + return val; +} + +static inline int itd1000_write_reg(struct itd1000_state *state, u8 r, u8 v) +{ + int ret = itd1000_write_regs(state, r, &v, 1); + state->shadow[r] = v; + return ret; +} + + +static struct { + u32 symbol_rate; + u8 pgaext : 4; /* PLLFH */ + u8 bbgvmin : 4; /* BBGVMIN */ +} itd1000_lpf_pga[] = { + { 0, 0x8, 0x3 }, + { 5200000, 0x8, 0x3 }, + { 12200000, 0x4, 0x3 }, + { 15400000, 0x2, 0x3 }, + { 19800000, 0x2, 0x3 }, + { 21500000, 0x2, 0x3 }, + { 24500000, 0x2, 0x3 }, + { 28400000, 0x2, 0x3 }, + { 33400000, 0x2, 0x3 }, + { 34400000, 0x1, 0x4 }, + { 34400000, 0x1, 0x4 }, + { 38400000, 0x1, 0x4 }, + { 38400000, 0x1, 0x4 }, + { 40400000, 0x1, 0x4 }, + { 45400000, 0x1, 0x4 }, +}; + +static void itd1000_set_lpf_bw(struct itd1000_state *state, u32 symbol_rate) +{ + u8 i; + u8 con1 = itd1000_read_reg(state, CON1) & 0xfd; + u8 pllfh = itd1000_read_reg(state, PLLFH) & 0x0f; + u8 bbgvmin = itd1000_read_reg(state, BBGVMIN) & 0xf0; + u8 bw = itd1000_read_reg(state, BW) & 0xf0; + + deb("symbol_rate = %d", symbol_rate); + + /* not sure what is that ? - starting to download the table */ + itd1000_write_reg(state, CON1, con1 | (1 << 1)); + + for (i = 0; i < ARRAY_SIZE(itd1000_lpf_pga); i++) + if (symbol_rate < itd1000_lpf_pga[i].symbol_rate) { + deb("symrate: index: %d pgaext: %x, bbgvmin: %x", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin); + itd1000_write_reg(state, PLLFH, pllfh | (itd1000_lpf_pga[i].pgaext << 4)); + itd1000_write_reg(state, BBGVMIN, bbgvmin | (itd1000_lpf_pga[i].bbgvmin)); + itd1000_write_reg(state, BW, bw | (i & 0x0f)); + break; + } + + itd1000_write_reg(state, CON1, con1 | (0 << 1)); +} + +static struct { + u8 vcorg; + u32 fmax_rg; +} itd1000_vcorg[] = { + { 1, 920000 }, + { 2, 971000 }, + { 3, 1031000 }, + { 4, 1091000 }, + { 5, 1171000 }, + { 6, 1281000 }, + { 7, 1381000 }, + { 8, 500000 }, /* this is intentional. */ + { 9, 1451000 }, + { 10, 1531000 }, + { 11, 1631000 }, + { 12, 1741000 }, + { 13, 1891000 }, + { 14, 2071000 }, + { 15, 2250000 }, +}; + +static void itd1000_set_vco(struct itd1000_state *state, u32 freq_khz) +{ + u8 i; + u8 gvbb_i2c = itd1000_read_reg(state, GVBB_I2C) & 0xbf; + u8 vco_chp1_i2c = itd1000_read_reg(state, VCO_CHP1_I2C) & 0x0f; + u8 adcout; + + /* reserved bit again (reset ?) */ + itd1000_write_reg(state, GVBB_I2C, gvbb_i2c | (1 << 6)); + + for (i = 0; i < ARRAY_SIZE(itd1000_vcorg); i++) { + if (freq_khz < itd1000_vcorg[i].fmax_rg) { + itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | (itd1000_vcorg[i].vcorg << 4)); + msleep(1); + + adcout = itd1000_read_reg(state, PLLLOCK) & 0x0f; + + deb("VCO: %dkHz: %d -> ADCOUT: %d %02x", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c); + + if (adcout > 13) { + if (!(itd1000_vcorg[i].vcorg == 7 || itd1000_vcorg[i].vcorg == 15)) + itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | ((itd1000_vcorg[i].vcorg + 1) << 4)); + } else if (adcout < 2) { + if (!(itd1000_vcorg[i].vcorg == 1 || itd1000_vcorg[i].vcorg == 9)) + itd1000_write_reg(state, VCO_CHP1_I2C, vco_chp1_i2c | ((itd1000_vcorg[i].vcorg - 1) << 4)); + } + break; + } + } +} + +static const struct { + u32 freq; + u8 values[10]; /* RFTR, RFST1 - RFST9 */ +} itd1000_fre_values[] = { + { 1075000, { 0x59, 0x1d, 0x1c, 0x17, 0x16, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1250000, { 0x89, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1450000, { 0x89, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1650000, { 0x69, 0x1e, 0x1d, 0x17, 0x15, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1750000, { 0x69, 0x1e, 0x17, 0x15, 0x14, 0x0f, 0x0e, 0x0c, 0x0b, 0x0a } }, + { 1850000, { 0x69, 0x1d, 0x17, 0x16, 0x14, 0x0f, 0x0e, 0x0d, 0x0b, 0x0a } }, + { 1900000, { 0x69, 0x1d, 0x17, 0x15, 0x14, 0x0f, 0x0e, 0x0d, 0x0b, 0x0a } }, + { 1950000, { 0x69, 0x1d, 0x17, 0x16, 0x14, 0x13, 0x0e, 0x0d, 0x0b, 0x0a } }, + { 2050000, { 0x69, 0x1e, 0x1d, 0x17, 0x16, 0x14, 0x13, 0x0e, 0x0b, 0x0a } }, + { 2150000, { 0x69, 0x1d, 0x1c, 0x17, 0x15, 0x14, 0x13, 0x0f, 0x0e, 0x0b } } +}; + + +#define FREF 16 + +static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz) +{ + int i, j; + u32 plln, pllf; + u64 tmp; + + plln = (freq_khz * 1000) / 2 / FREF; + + /* Compute the factional part times 1000 */ + tmp = plln % 1000000; + plln /= 1000000; + + tmp *= 1048576; + do_div(tmp, 1000000); + pllf = (u32) tmp; + + state->frequency = ((plln * 1000) + (pllf * 1000)/1048576) * 2*FREF; + deb("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d", freq_khz, state->frequency, pllf, plln); + + itd1000_write_reg(state, PLLNH, 0x80); /* PLLNH */; + itd1000_write_reg(state, PLLNL, plln & 0xff); + itd1000_write_reg(state, PLLFH, (itd1000_read_reg(state, PLLFH) & 0xf0) | ((pllf >> 16) & 0x0f)); + itd1000_write_reg(state, PLLFM, (pllf >> 8) & 0xff); + itd1000_write_reg(state, PLLFL, (pllf >> 0) & 0xff); + + for (i = 0; i < ARRAY_SIZE(itd1000_fre_values); i++) { + if (freq_khz <= itd1000_fre_values[i].freq) { + deb("fre_values: %d", i); + itd1000_write_reg(state, RFTR, itd1000_fre_values[i].values[0]); + for (j = 0; j < 9; j++) + itd1000_write_reg(state, RFST1+j, itd1000_fre_values[i].values[j+1]); + break; + } + } + + itd1000_set_vco(state, freq_khz); +} + +static int itd1000_set_parameters(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) +{ + struct itd1000_state *state = fe->tuner_priv; + u8 pllcon1; + + itd1000_set_lo(state, p->frequency); + itd1000_set_lpf_bw(state, p->u.qpsk.symbol_rate); + + pllcon1 = itd1000_read_reg(state, PLLCON1) & 0x7f; + itd1000_write_reg(state, PLLCON1, pllcon1 | (1 << 7)); + itd1000_write_reg(state, PLLCON1, pllcon1); + + return 0; +} + +static int itd1000_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct itd1000_state *state = fe->tuner_priv; + *frequency = state->frequency; + return 0; +} + +static int itd1000_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + return 0; +} + +static u8 itd1000_init_tab[][2] = { + { PLLCON1, 0x65 }, /* Register does not change */ + { PLLNH, 0x80 }, /* Bits [7:6] do not change */ + { RESERVED_0X6D, 0x3b }, + { VCO_CHP2_I2C, 0x12 }, + { 0x72, 0xf9 }, /* No such regsister defined */ + { RESERVED_0X73, 0xff }, + { RESERVED_0X74, 0xb2 }, + { RESERVED_0X75, 0xc7 }, + { EXTGVBBRF, 0xf0 }, + { DIVAGCCK, 0x80 }, + { BBTR, 0xa0 }, + { RESERVED_0X7E, 0x4f }, + { 0x82, 0x88 }, /* No such regsister defined */ + { 0x83, 0x80 }, /* No such regsister defined */ + { 0x84, 0x80 }, /* No such regsister defined */ + { RESERVED_0X85, 0x74 }, + { RESERVED_0X86, 0xff }, + { RESERVED_0X88, 0x02 }, + { RESERVED_0X89, 0x16 }, + { RFST0, 0x1f }, + { RESERVED_0X94, 0x66 }, + { RESERVED_0X95, 0x66 }, + { RESERVED_0X96, 0x77 }, + { RESERVED_0X97, 0x99 }, + { RESERVED_0X98, 0xff }, + { RESERVED_0X99, 0xfc }, + { RESERVED_0X9A, 0xba }, + { RESERVED_0X9B, 0xaa }, +}; + +static u8 itd1000_reinit_tab[][2] = { + { VCO_CHP1_I2C, 0x8a }, + { BW, 0x87 }, + { GVBB_I2C, 0x03 }, + { BBGVMIN, 0x03 }, + { CON1, 0x2e }, +}; + + +static int itd1000_init(struct dvb_frontend *fe) +{ + struct itd1000_state *state = fe->tuner_priv; + int i; + + for (i = 0; i < ARRAY_SIZE(itd1000_init_tab); i++) + itd1000_write_reg(state, itd1000_init_tab[i][0], itd1000_init_tab[i][1]); + + for (i = 0; i < ARRAY_SIZE(itd1000_reinit_tab); i++) + itd1000_write_reg(state, itd1000_reinit_tab[i][0], itd1000_reinit_tab[i][1]); + + return 0; +} + +static int itd1000_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int itd1000_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static const struct dvb_tuner_ops itd1000_tuner_ops = { + .info = { + .name = "Integrant ITD1000", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_step = 125, /* kHz for QPSK frontends */ + }, + + .release = itd1000_release, + + .init = itd1000_init, + .sleep = itd1000_sleep, + + .set_params = itd1000_set_parameters, + .get_frequency = itd1000_get_frequency, + .get_bandwidth = itd1000_get_bandwidth +}; + + +struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg) +{ + struct itd1000_state *state = NULL; + u8 i = 0; + + state = kzalloc(sizeof(struct itd1000_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + state->cfg = cfg; + state->i2c = i2c; + + i = itd1000_read_reg(state, 0); + if (i != 0) { + kfree(state); + return NULL; + } + info("successfully identified (ID: %d)", i); + + memset(state->shadow, 0xff, sizeof(state->shadow)); + for (i = 0x65; i < 0x9c; i++) + state->shadow[i] = itd1000_read_reg(state, i); + + memcpy(&fe->ops.tuner_ops, &itd1000_tuner_ops, sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = state; + + return fe; +} +EXPORT_SYMBOL(itd1000_attach); + +MODULE_AUTHOR("Patrick Boettcher <pb@linuxtv.org>"); +MODULE_DESCRIPTION("Integrant ITD1000 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/itd1000.h b/drivers/media/dvb/frontends/itd1000.h new file mode 100644 index 00000000000..5e18df071b8 --- /dev/null +++ b/drivers/media/dvb/frontends/itd1000.h @@ -0,0 +1,42 @@ +/* + * Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite" + * + * Copyright (c) 2007 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef ITD1000_H +#define ITD1000_H + +struct dvb_frontend; +struct i2c_adapter; + +struct itd1000_config { + u8 i2c_address; +}; + +#if defined(CONFIG_DVB_TUNER_ITD1000) || (defined(CONFIG_DVB_TUNER_ITD1000_MODULE) && defined(MODULE)) +extern struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg); +#else +static inline struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb/frontends/itd1000_priv.h b/drivers/media/dvb/frontends/itd1000_priv.h new file mode 100644 index 00000000000..8cdc54e5790 --- /dev/null +++ b/drivers/media/dvb/frontends/itd1000_priv.h @@ -0,0 +1,88 @@ +/* + * Driver for the Integrant ITD1000 "Zero-IF Tuner IC for Direct Broadcast Satellite" + * + * Copyright (c) 2007 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef ITD1000_PRIV_H +#define ITD1000_PRIV_H + +struct itd1000_state { + struct itd1000_config *cfg; + struct i2c_adapter *i2c; + + u32 frequency; /* contains the value resulting from the LO-setting */ + + /* ugly workaround for flexcop's incapable i2c-controller + * FIXME, if possible + */ + u8 shadow[255]; +}; + +enum itd1000_register { + VCO_CHP1 = 0x65, + VCO_CHP2, + PLLCON1, + PLLNH, + PLLNL, + PLLFH, + PLLFM, + PLLFL, + RESERVED_0X6D, + PLLLOCK, + VCO_CHP2_I2C, + VCO_CHP1_I2C, + BW, + RESERVED_0X73 = 0x73, + RESERVED_0X74, + RESERVED_0X75, + GVBB, + GVRF, + GVBB_I2C, + EXTGVBBRF, + DIVAGCCK, + BBTR, + RFTR, + BBGVMIN, + RESERVED_0X7E, + RESERVED_0X85 = 0x85, + RESERVED_0X86, + CON1, + RESERVED_0X88, + RESERVED_0X89, + RFST0, + RFST1, + RFST2, + RFST3, + RFST4, + RFST5, + RFST6, + RFST7, + RFST8, + RFST9, + RESERVED_0X94, + RESERVED_0X95, + RESERVED_0X96, + RESERVED_0X97, + RESERVED_0X98, + RESERVED_0X99, + RESERVED_0X9A, + RESERVED_0X9B, +}; + +#endif diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c index 443d9045d4c..e1e70e9e0cb 100644 --- a/drivers/media/dvb/frontends/l64781.c +++ b/drivers/media/dvb/frontends/l64781.c @@ -57,7 +57,7 @@ static int l64781_writereg (struct l64781_state* state, u8 reg, u8 data) if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) dprintk ("%s: write_reg error (reg == %02x) = %02x!\n", - __FUNCTION__, reg, ret); + __func__, reg, ret); return (ret != 1) ? -1 : 0; } diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h index cd15f76ff28..1305a9e7fb0 100644 --- a/drivers/media/dvb/frontends/l64781.h +++ b/drivers/media/dvb/frontends/l64781.h @@ -38,7 +38,7 @@ extern struct dvb_frontend* l64781_attach(const struct l64781_config* config, static inline struct dvb_frontend* l64781_attach(const struct l64781_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_L64781 diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index bdc9fa88b86..f0195c8272f 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -49,7 +49,7 @@ /* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */ /* #define USE_EQMSE */ -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off)."); #define dprintk(args...) \ @@ -88,7 +88,7 @@ static int i2c_write_demod_bytes (struct lgdt330x_state* state, for (i=0; i<len-1; i+=2){ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err); + printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __func__, msg.buf[0], msg.buf[1], err); if (err < 0) return err; else @@ -117,7 +117,7 @@ static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, int ret; ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { - printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __FUNCTION__, state->config->demod_address, reg, ret); + printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __func__, state->config->demod_address, reg, ret); } else { ret = 0; } @@ -256,7 +256,7 @@ static int lgdt330x_init(struct dvb_frontend* fe) printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n"); err = -ENODEV; } - dprintk("%s entered as %s\n", __FUNCTION__, chip_name); + dprintk("%s entered as %s\n", __func__, chip_name); if (err < 0) return err; return lgdt330x_SwReset(state); @@ -334,7 +334,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe, if (state->current_modulation != param->u.vsb.modulation) { switch(param->u.vsb.modulation) { case VSB_8: - dprintk("%s: VSB_8 MODE\n", __FUNCTION__); + dprintk("%s: VSB_8 MODE\n", __func__); /* Select VSB mode */ top_ctrl_cfg[1] = 0x03; @@ -350,7 +350,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe, break; case QAM_64: - dprintk("%s: QAM_64 MODE\n", __FUNCTION__); + dprintk("%s: QAM_64 MODE\n", __func__); /* Select QAM_64 mode */ top_ctrl_cfg[1] = 0x00; @@ -366,7 +366,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe, break; case QAM_256: - dprintk("%s: QAM_256 MODE\n", __FUNCTION__); + dprintk("%s: QAM_256 MODE\n", __func__); /* Select QAM_256 mode */ top_ctrl_cfg[1] = 0x01; @@ -381,7 +381,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe, } break; default: - printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation); + printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __func__, param->u.vsb.modulation); return -1; } /* @@ -431,7 +431,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) /* AGC status register */ i2c_read_demod_bytes(state, AGC_STATUS, buf, 1); - dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]); if ((buf[0] & 0x0c) == 0x8){ /* Test signal does not exist flag */ /* as well as the AGC lock flag. */ @@ -445,7 +445,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) */ /* signal status */ i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf)); - dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]); + dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __func__, buf[0], buf[1], buf[2]); /* sync status */ @@ -461,7 +461,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) /* Carrier Recovery Lock Status Register */ i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); - dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]); switch (state->current_modulation) { case QAM_256: case QAM_64: @@ -474,7 +474,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) *status |= FE_HAS_CARRIER; break; default: - printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__); + printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__); } return 0; @@ -493,7 +493,7 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) if (err < 0) return err; - dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]); if ((buf[0] & 0x21) == 0x01){ /* Test input signal does not exist flag */ /* as well as the AGC lock flag. */ @@ -502,7 +502,7 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) /* Carrier Recovery Lock Status Register */ i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); - dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]); switch (state->current_modulation) { case QAM_256: case QAM_64: @@ -533,7 +533,7 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) } break; default: - printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__); + printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__); } return 0; } @@ -607,14 +607,14 @@ static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr) break; default: printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n", - __FUNCTION__); + __func__); return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */ } state->snr = calculate_snr(noise, c); *snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */ - dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise, + dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; @@ -651,14 +651,14 @@ static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr) break; default: printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n", - __FUNCTION__); + __func__); return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */ } state->snr = calculate_snr(noise, c); *snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */ - dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise, + dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16); return 0; @@ -743,7 +743,7 @@ struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, error: kfree(state); - dprintk("%s: ERROR\n",__FUNCTION__); + dprintk("%s: ERROR\n",__func__); return NULL; } diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h index 995059004b1..9012504f0f2 100644 --- a/drivers/media/dvb/frontends/lgdt330x.h +++ b/drivers/media/dvb/frontends/lgdt330x.h @@ -59,7 +59,7 @@ extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config static inline struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_LGDT330X diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h index 68906acf7d6..8fe094bd968 100644 --- a/drivers/media/dvb/frontends/lnbp21.h +++ b/drivers/media/dvb/frontends/lnbp21.h @@ -45,7 +45,7 @@ extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_ad #else static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_LNBP21 diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index 1638301fbd6..5ac9b15920f 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -1,7 +1,8 @@ /* - Driver for Zarlink VP310/MT312 Satellite Channel Decoder + Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org> + Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -43,7 +44,8 @@ struct mt312_state { struct dvb_frontend frontend; u8 id; - u8 frequency; + unsigned long xtal; + u8 freq_mult; }; static int debug; @@ -53,12 +55,11 @@ static int debug; printk(KERN_DEBUG "mt312: " args); \ } while (0) -#define MT312_SYS_CLK 90000000UL /* 90 MHz */ -#define MT312_LPOWER_SYS_CLK 60000000UL /* 60 MHz */ #define MT312_PLL_CLK 10000000UL /* 10 MHz */ +#define MT312_PLL_CLK_10_111 10111000UL /* 10.111 MHz */ static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg, - void *buf, const size_t count) + u8 *buf, const size_t count) { int ret; struct i2c_msg msg[2]; @@ -76,7 +77,7 @@ static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg, ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { - printk(KERN_ERR "%s: ret == %d\n", __FUNCTION__, ret); + printk(KERN_ERR "%s: ret == %d\n", __func__, ret); return -EREMOTEIO; } @@ -84,7 +85,7 @@ static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg, int i; dprintk("R(%d):", reg & 0x7f); for (i = 0; i < count; i++) - printk(" %02x", ((const u8 *) buf)[i]); + printk(" %02x", buf[i]); printk("\n"); } @@ -92,7 +93,7 @@ static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg, } static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg, - const void *src, const size_t count) + const u8 *src, const size_t count) { int ret; u8 buf[count + 1]; @@ -102,7 +103,7 @@ static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg, int i; dprintk("W(%d):", reg & 0x7f); for (i = 0; i < count; i++) - printk(" %02x", ((const u8 *) src)[i]); + printk(" %02x", src[i]); printk("\n"); } @@ -117,7 +118,7 @@ static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg, ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) { - dprintk("%s: ret == %d\n", __FUNCTION__, ret); + dprintk("%s: ret == %d\n", __func__, ret); return -EREMOTEIO; } @@ -209,7 +210,7 @@ static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr) dprintk("sym_rat_op=%d dec_ratio=%d\n", sym_rat_op, dec_ratio); dprintk("*sr(manual) = %lu\n", - (((MT312_PLL_CLK * 8192) / (sym_rat_op + 8192)) * + (((state->xtal * 8192) / (sym_rat_op + 8192)) * 2) - dec_ratio); } @@ -242,7 +243,7 @@ static int mt312_initfe(struct dvb_frontend *fe) /* wake up */ ret = mt312_writereg(state, CONFIG, - (state->frequency == 60 ? 0x88 : 0x8c)); + (state->freq_mult == 6 ? 0x88 : 0x8c)); if (ret < 0) return ret; @@ -265,12 +266,37 @@ static int mt312_initfe(struct dvb_frontend *fe) return ret; } + switch (state->id) { + case ID_ZL10313: + /* enable ADC */ + ret = mt312_writereg(state, GPP_CTRL, 0x80); + if (ret < 0) + return ret; + + /* configure ZL10313 for optimal ADC performance */ + buf[0] = 0x80; + buf[1] = 0xB0; + ret = mt312_write(state, HW_CTRL, buf, 2); + if (ret < 0) + return ret; + + /* enable MPEG output and ADCs */ + ret = mt312_writereg(state, HW_CTRL, 0x00); + if (ret < 0) + return ret; + + ret = mt312_writereg(state, MPEG_CTRL, 0x00); + if (ret < 0) + return ret; + + break; + } + /* SYS_CLK */ - buf[0] = mt312_div((state->frequency == 60 ? MT312_LPOWER_SYS_CLK : - MT312_SYS_CLK) * 2, 1000000); + buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000); /* DISEQC_RATIO */ - buf[1] = mt312_div(MT312_PLL_CLK, 15000 * 4); + buf[1] = mt312_div(state->xtal, 22000 * 4); ret = mt312_write(state, SYS_CLK, buf, sizeof(buf)); if (ret < 0) @@ -280,7 +306,17 @@ static int mt312_initfe(struct dvb_frontend *fe) if (ret < 0) return ret; - ret = mt312_writereg(state, OP_CTRL, 0x53); + /* different MOCLK polarity */ + switch (state->id) { + case ID_ZL10313: + buf[0] = 0x33; + break; + default: + buf[0] = 0x53; + break; + } + + ret = mt312_writereg(state, OP_CTRL, buf[0]); if (ret < 0) return ret; @@ -323,6 +359,9 @@ static int mt312_send_master_cmd(struct dvb_frontend *fe, if (ret < 0) return ret; + /* is there a better way to wait for message to be transmitted */ + msleep(100); + /* set DISEQC_MODE[2:0] to zero if a return message is expected */ if (c->msg[0] & 0x02) { ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40)); @@ -383,11 +422,16 @@ static int mt312_set_voltage(struct dvb_frontend *fe, const fe_sec_voltage_t v) { struct mt312_state *state = fe->demodulator_priv; const u8 volt_tab[3] = { 0x00, 0x40, 0x00 }; + u8 val; if (v > SEC_VOLTAGE_OFF) return -EINVAL; - return mt312_writereg(state, DISEQC_MODE, volt_tab[v]); + val = volt_tab[v]; + if (state->config->voltage_inverted) + val ^= 0x40; + + return mt312_writereg(state, DISEQC_MODE, val); } static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s) @@ -463,7 +507,7 @@ static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr) int ret; u8 buf[2]; - ret = mt312_read(state, M_SNR_H, &buf, sizeof(buf)); + ret = mt312_read(state, M_SNR_H, buf, sizeof(buf)); if (ret < 0) return ret; @@ -478,7 +522,7 @@ static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc) int ret; u8 buf[2]; - ret = mt312_read(state, RS_UBC_H, &buf, sizeof(buf)); + ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf)); if (ret < 0) return ret; @@ -499,7 +543,7 @@ static int mt312_set_frontend(struct dvb_frontend *fe, { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f }; const u8 inv_tab[3] = { 0x00, 0x40, 0x80 }; - dprintk("%s: Freq %d\n", __FUNCTION__, p->frequency); + dprintk("%s: Freq %d\n", __func__, p->frequency); if ((p->frequency < fe->ops.info.frequency_min) || (p->frequency > fe->ops.info.frequency_max)) @@ -532,17 +576,17 @@ static int mt312_set_frontend(struct dvb_frontend *fe, return ret; if (p->u.qpsk.symbol_rate >= 30000000) { /* Note that 30MS/s should use 90MHz */ - if ((config_val & 0x0c) == 0x08) { + if (state->freq_mult == 6) { /* We are running 60MHz */ - state->frequency = 90; + state->freq_mult = 9; ret = mt312_initfe(fe); if (ret < 0) return ret; } } else { - if ((config_val & 0x0c) == 0x0C) { + if (state->freq_mult == 9) { /* We are running 90MHz */ - state->frequency = 60; + state->freq_mult = 6; ret = mt312_initfe(fe); if (ret < 0) return ret; @@ -551,6 +595,7 @@ static int mt312_set_frontend(struct dvb_frontend *fe, break; case ID_MT312: + case ID_ZL10313: break; default: @@ -616,11 +661,29 @@ static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { struct mt312_state *state = fe->demodulator_priv; - if (enable) { - return mt312_writereg(state, GPP_CTRL, 0x40); - } else { - return mt312_writereg(state, GPP_CTRL, 0x00); + u8 val = 0x00; + int ret; + + switch (state->id) { + case ID_ZL10313: + ret = mt312_readreg(state, GPP_CTRL, &val); + if (ret < 0) + goto error; + + /* preserve this bit to not accidently shutdown ADC */ + val &= 0x80; + break; } + + if (enable) + val |= 0x40; + else + val &= ~0x40; + + ret = mt312_writereg(state, GPP_CTRL, val); + +error: + return ret; } static int mt312_sleep(struct dvb_frontend *fe) @@ -634,6 +697,18 @@ static int mt312_sleep(struct dvb_frontend *fe) if (ret < 0) return ret; + if (state->id == ID_ZL10313) { + /* reset ADC */ + ret = mt312_writereg(state, GPP_CTRL, 0x00); + if (ret < 0) + return ret; + + /* full shutdown of ADCs, mpeg bus tristated */ + ret = mt312_writereg(state, HW_CTRL, 0x0d); + if (ret < 0) + return ret; + } + ret = mt312_readreg(state, CONFIG, &config); if (ret < 0) return ret; @@ -661,15 +736,16 @@ static void mt312_release(struct dvb_frontend *fe) kfree(state); } -static struct dvb_frontend_ops vp310_mt312_ops = { +#define MT312_SYS_CLK 90000000UL /* 90 MHz */ +static struct dvb_frontend_ops mt312_ops = { .info = { .name = "Zarlink ???? DVB-S", .type = FE_QPSK, .frequency_min = 950000, .frequency_max = 2150000, - .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128, - .symbol_rate_min = MT312_SYS_CLK / 128, + .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128, /* FIXME: adjust freq to real used xtal */ + .symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */ .symbol_rate_max = MT312_SYS_CLK / 2, .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | @@ -700,7 +776,7 @@ static struct dvb_frontend_ops vp310_mt312_ops = { .set_voltage = mt312_set_voltage, }; -struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config, +struct dvb_frontend *mt312_attach(const struct mt312_config *config, struct i2c_adapter *i2c) { struct mt312_state *state = NULL; @@ -719,21 +795,28 @@ struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config, goto error; /* create dvb_frontend */ - memcpy(&state->frontend.ops, &vp310_mt312_ops, + memcpy(&state->frontend.ops, &mt312_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; switch (state->id) { case ID_VP310: strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S"); - state->frequency = 90; + state->xtal = MT312_PLL_CLK; + state->freq_mult = 9; break; case ID_MT312: strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S"); - state->frequency = 60; + state->xtal = MT312_PLL_CLK; + state->freq_mult = 6; + break; + case ID_ZL10313: + strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S"); + state->xtal = MT312_PLL_CLK_10_111; + state->freq_mult = 9; break; default: - printk(KERN_WARNING "Only Zarlink VP310/MT312" + printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313" " are supported chips.\n"); goto error; } @@ -744,12 +827,13 @@ error: kfree(state); return NULL; } -EXPORT_SYMBOL(vp310_mt312_attach); +EXPORT_SYMBOL(mt312_attach); module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); -MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver"); +MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver"); MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); +MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h index f17cb93ba9b..29e3bb5496b 100644 --- a/drivers/media/dvb/frontends/mt312.h +++ b/drivers/media/dvb/frontends/mt312.h @@ -31,16 +31,19 @@ struct mt312_config { /* the demodulator's i2c address */ u8 demod_address; + + /* inverted voltage setting */ + unsigned int voltage_inverted:1; }; #if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE)) -struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config, +struct dvb_frontend *mt312_attach(const struct mt312_config *config, struct i2c_adapter *i2c); #else -static inline struct dvb_frontend *vp310_mt312_attach( +static inline struct dvb_frontend *mt312_attach( const struct mt312_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif /* CONFIG_DVB_MT312 */ diff --git a/drivers/media/dvb/frontends/mt312_priv.h b/drivers/media/dvb/frontends/mt312_priv.h index 5e0b95b5337..a3959f94d63 100644 --- a/drivers/media/dvb/frontends/mt312_priv.h +++ b/drivers/media/dvb/frontends/mt312_priv.h @@ -110,6 +110,8 @@ enum mt312_reg_addr { VIT_ERRPER_H = 83, VIT_ERRPER_M = 84, VIT_ERRPER_L = 85, + HW_CTRL = 84, /* ZL10313 only */ + MPEG_CTRL = 85, /* ZL10313 only */ VIT_SETUP = 86, VIT_REF0 = 87, VIT_REF1 = 88, @@ -156,7 +158,8 @@ enum mt312_reg_addr { enum mt312_model_id { ID_VP310 = 1, - ID_MT312 = 3 + ID_MT312 = 3, + ID_ZL10313 = 5, }; #endif /* DVB_FRONTENDS_MT312_PRIV */ diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb/frontends/mt352.c index 7cd190b6f01..beba5aa0db5 100644 --- a/drivers/media/dvb/frontends/mt352.c +++ b/drivers/media/dvb/frontends/mt352.c @@ -95,7 +95,7 @@ static int mt352_read_register(struct mt352_state* state, u8 reg) if (ret != 2) { printk("%s: readreg error (reg=%d, ret==%i)\n", - __FUNCTION__, reg, ret); + __func__, reg, ret); return ret; } @@ -135,7 +135,7 @@ static void mt352_calc_nominal_rate(struct mt352_state* state, value = 64 * bw * (1<<16) / (7 * 8); value = value * 1000 / adc_clock; dprintk("%s: bw %d, adc_clock %d => 0x%x\n", - __FUNCTION__, bw, adc_clock, value); + __func__, bw, adc_clock, value); buf[0] = msb(value); buf[1] = lsb(value); } @@ -161,7 +161,7 @@ static void mt352_calc_input_freq(struct mt352_state* state, } value = -16374 * ife / adc_clock; dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n", - __FUNCTION__, if2, ife, adc_clock, value, value & 0x3fff); + __func__, if2, ife, adc_clock, value, value & 0x3fff); buf[0] = msb(value); buf[1] = lsb(value); } @@ -521,7 +521,7 @@ static int mt352_init(struct dvb_frontend* fe) static u8 mt352_reset_attach [] = { RESET, 0xC0 }; - dprintk("%s: hello\n",__FUNCTION__); + dprintk("%s: hello\n",__func__); if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 || (mt352_read_register(state, CONFIG) & 0x20) == 0) { diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h index e9964081fd8..595092f9f0c 100644 --- a/drivers/media/dvb/frontends/mt352.h +++ b/drivers/media/dvb/frontends/mt352.h @@ -58,7 +58,7 @@ extern struct dvb_frontend* mt352_attach(const struct mt352_config* config, static inline struct dvb_frontend* mt352_attach(const struct mt352_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_MT352 diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c index fcf964fe1d6..23d02285254 100644 --- a/drivers/media/dvb/frontends/nxt200x.c +++ b/drivers/media/dvb/frontends/nxt200x.c @@ -74,7 +74,7 @@ static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n", - __FUNCTION__, addr, err); + __func__, addr, err); return -EREMOTEIO; } return 0; @@ -87,7 +87,7 @@ static u8 i2c_readbytes (struct nxt200x_state* state, u8 addr, u8* buf, u8 len) if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n", - __FUNCTION__, addr, err); + __func__, addr, err); return -EREMOTEIO; } return 0; @@ -104,7 +104,7 @@ static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg, u8 *buf, u8 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n", - __FUNCTION__, state->config->demod_address, err); + __func__, state->config->demod_address, err); return -EREMOTEIO; } return 0; @@ -121,7 +121,7 @@ static u8 nxt200x_readbytes (struct nxt200x_state* state, u8 reg, u8* buf, u8 le if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n", - __FUNCTION__, state->config->demod_address, err); + __func__, state->config->demod_address, err); return -EREMOTEIO; } return 0; @@ -146,7 +146,7 @@ static u16 nxt200x_crc(u16 crc, u8 c) static int nxt200x_writereg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len) { u8 attr, len2, buf; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* set mutli register register */ nxt200x_writebytes(state, 0x35, ®, 1); @@ -207,7 +207,7 @@ static int nxt200x_readreg_multibyte (struct nxt200x_state* state, u8 reg, u8* d { int i; u8 buf, len2, attr; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* set mutli register register */ nxt200x_writebytes(state, 0x35, ®, 1); @@ -254,7 +254,7 @@ static int nxt200x_readreg_multibyte (struct nxt200x_state* state, u8 reg, u8* d static void nxt200x_microcontroller_stop (struct nxt200x_state* state) { u8 buf, stopval, counter = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* set correct stop value */ switch (state->demod_chip) { @@ -287,7 +287,7 @@ static void nxt200x_microcontroller_stop (struct nxt200x_state* state) static void nxt200x_microcontroller_start (struct nxt200x_state* state) { u8 buf; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); buf = 0x00; nxt200x_writebytes(state, 0x22, &buf, 1); @@ -297,7 +297,7 @@ static void nxt2004_microcontroller_init (struct nxt200x_state* state) { u8 buf[9]; u8 counter = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); buf[0] = 0x00; nxt200x_writebytes(state, 0x2b, buf, 1); @@ -328,7 +328,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) { u8 buf, count = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dprintk("Tuner Bytes: %02X %02X %02X %02X\n", data[1], data[2], data[3], data[4]); @@ -387,7 +387,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) static void nxt200x_agc_reset(struct nxt200x_state* state) { u8 buf; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); switch (state->demod_chip) { case NXT2002: @@ -416,7 +416,7 @@ static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware u8 buf[3], written = 0, chunkpos = 0; u16 rambase, position, crc = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dprintk("Firmware is %zu bytes\n", fw->size); /* Get the RAM base for this nxt2002 */ @@ -483,7 +483,7 @@ static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware u8 buf[3]; u16 rambase, position, crc=0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dprintk("Firmware is %zu bytes\n", fw->size); /* set rambase */ diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb/frontends/nxt200x.h index bb0ef58d797..f3c84583770 100644 --- a/drivers/media/dvb/frontends/nxt200x.h +++ b/drivers/media/dvb/frontends/nxt200x.h @@ -49,7 +49,7 @@ extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, static inline struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_NXT200X diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c index d313d7dcf38..0eef22dbf8a 100644 --- a/drivers/media/dvb/frontends/nxt6000.c +++ b/drivers/media/dvb/frontends/nxt6000.c @@ -38,7 +38,7 @@ struct nxt6000_state { struct dvb_frontend frontend; }; -static int debug = 0; +static int debug; #define dprintk if (debug) printk static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data) diff --git a/drivers/media/dvb/frontends/nxt6000.h b/drivers/media/dvb/frontends/nxt6000.h index 13d22518356..878eb38a075 100644 --- a/drivers/media/dvb/frontends/nxt6000.h +++ b/drivers/media/dvb/frontends/nxt6000.h @@ -40,7 +40,7 @@ extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, static inline struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_NXT6000 diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index 1d2d28ce823..5ed32544de3 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -91,7 +91,7 @@ static int or51132_writebuf(struct or51132_state *state, const u8 *buf, int len) Less code and more efficient that loading a buffer on the stack with the bytes to send and then calling or51132_writebuf() on that. */ #define or51132_writebytes(state, data...) \ - ({ const static u8 _data[] = {data}; \ + ({ static const u8 _data[] = {data}; \ or51132_writebuf(state, _data, sizeof(_data)); }) /* Read data from demod into buffer. Returns 0 on success. */ @@ -126,13 +126,13 @@ static int or51132_readreg(struct or51132_state *state, u8 reg) reg, err); return -EREMOTEIO; } - return le16_to_cpup((u16*)buf); + return buf[0] | (buf[1] << 8); } static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) { struct or51132_state* state = fe->demodulator_priv; - const static u8 run_buf[] = {0x7F,0x01}; + static const u8 run_buf[] = {0x7F,0x01}; u8 rec_buf[8]; u32 firmwareAsize, firmwareBsize; int i,ret; @@ -140,9 +140,9 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware dprintk("Firmware is %Zd bytes\n",fw->size); /* Get size of firmware A and B */ - firmwareAsize = le32_to_cpu(*((u32*)fw->data)); + firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); dprintk("FirmwareA is %i bytes\n",firmwareAsize); - firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4))); + firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); dprintk("FirmwareB is %i bytes\n",firmwareBsize); /* Upload firmware */ @@ -419,7 +419,7 @@ static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status) *status = 0; return -EREMOTEIO; } - dprintk("%s: read_status %04x\n", __FUNCTION__, reg); + dprintk("%s: read_status %04x\n", __func__, reg); if (reg & 0x0100) /* Receiver Lock */ *status = FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI| @@ -504,14 +504,14 @@ start: if (retry--) goto start; return -EREMOTEIO; } - dprintk("%s: modulation %02x, NTSC rej O%s\n", __FUNCTION__, + dprintk("%s: modulation %02x, NTSC rej O%s\n", __func__, reg&0xff, reg&0x1000?"n":"ff"); /* Calculate SNR using noise, c, and NTSC rejection correction */ state->snr = calculate_snr(noise, c) - usK; *snr = (state->snr) >> 16; - dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise, + dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; diff --git a/drivers/media/dvb/frontends/or51132.h b/drivers/media/dvb/frontends/or51132.h index add24f0a743..1b8e04d973c 100644 --- a/drivers/media/dvb/frontends/or51132.h +++ b/drivers/media/dvb/frontends/or51132.h @@ -41,7 +41,7 @@ extern struct dvb_frontend* or51132_attach(const struct or51132_config* config, static inline struct dvb_frontend* or51132_attach(const struct or51132_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_OR51132 diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c index 6a6b0d727c6..7eaa4765593 100644 --- a/drivers/media/dvb/frontends/or51211.c +++ b/drivers/media/dvb/frontends/or51211.c @@ -307,19 +307,19 @@ static int or51211_read_snr(struct dvb_frontend* fe, u16* snr) if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { printk(KERN_WARNING "%s: error writing snr reg\n", - __FUNCTION__); + __func__); return -1; } if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { printk(KERN_WARNING "%s: read_status read error\n", - __FUNCTION__); + __func__); return -1; } state->snr = calculate_snr(rec_buf[0], 89599047); *snr = (state->snr) >> 16; - dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __FUNCTION__, rec_buf[0], + dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __func__, rec_buf[0], state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; diff --git a/drivers/media/dvb/frontends/or51211.h b/drivers/media/dvb/frontends/or51211.h index 8aad8402d61..3ce0508b898 100644 --- a/drivers/media/dvb/frontends/or51211.h +++ b/drivers/media/dvb/frontends/or51211.h @@ -44,7 +44,7 @@ extern struct dvb_frontend* or51211_attach(const struct or51211_config* config, static inline struct dvb_frontend* or51211_attach(const struct or51211_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_OR51211 diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 819433485d3..b999ec424ff 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -48,7 +48,7 @@ struct s5h1409_state { u32 qam_state; }; -static int debug = 0; +static int debug; #define dprintk if (debug) printk /* Register values to initialise the demod, this will set VSB by default */ @@ -312,7 +312,7 @@ static int s5h1409_writereg(struct s5h1409_state* state, u8 reg, u16 data) if (ret != 1) printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, " - "ret == %i)\n", __FUNCTION__, reg, data, ret); + "ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } @@ -332,7 +332,7 @@ static u16 s5h1409_readreg(struct s5h1409_state* state, u8 reg) ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) - printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret); + printk("%s: readreg error (ret == %i)\n", __func__, ret); return (b1[0] << 8) | b1[1]; } @@ -340,7 +340,7 @@ static int s5h1409_softreset(struct dvb_frontend* fe) { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s()\n", __FUNCTION__); + dprintk("%s()\n", __func__); s5h1409_writereg(state, 0xf5, 0); s5h1409_writereg(state, 0xf5, 1); @@ -356,7 +356,7 @@ static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s(%d KHz)\n", __FUNCTION__, KHz); + dprintk("%s(%d KHz)\n", __func__, KHz); switch (KHz) { case 4000: @@ -381,7 +381,7 @@ static int s5h1409_set_spectralinversion(struct dvb_frontend* fe, int inverted) { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s(%d)\n", __FUNCTION__, inverted); + dprintk("%s(%d)\n", __func__, inverted); if(inverted == 1) return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */ @@ -394,25 +394,25 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe, { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s(0x%08x)\n", __FUNCTION__, m); + dprintk("%s(0x%08x)\n", __func__, m); switch(m) { case VSB_8: - dprintk("%s() VSB_8\n", __FUNCTION__); + dprintk("%s() VSB_8\n", __func__); if (state->if_freq != S5H1409_VSB_IF_FREQ) s5h1409_set_if_freq(fe, S5H1409_VSB_IF_FREQ); s5h1409_writereg(state, 0xf4, 0); break; case QAM_64: case QAM_256: - dprintk("%s() QAM_AUTO (64/256)\n", __FUNCTION__); + dprintk("%s() QAM_AUTO (64/256)\n", __func__); if (state->if_freq != S5H1409_QAM_IF_FREQ) s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ); s5h1409_writereg(state, 0xf4, 1); s5h1409_writereg(state, 0x85, 0x110); break; default: - dprintk("%s() Invalid modulation\n", __FUNCTION__); + dprintk("%s() Invalid modulation\n", __func__); return -EINVAL; } @@ -426,7 +426,7 @@ static int s5h1409_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s(%d)\n", __FUNCTION__, enable); + dprintk("%s(%d)\n", __func__, enable); if (enable) return s5h1409_writereg(state, 0xf3, 1); @@ -438,21 +438,21 @@ static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable) { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s(%d)\n", __FUNCTION__, enable); + dprintk("%s(%d)\n", __func__, enable); if (enable) return s5h1409_writereg(state, 0xe3, s5h1409_readreg(state, 0xe3) | 0x1100); else return s5h1409_writereg(state, 0xe3, - s5h1409_readreg(state, 0xe3) & 0xeeff); + s5h1409_readreg(state, 0xe3) & 0xfeff); } static int s5h1409_sleep(struct dvb_frontend* fe, int enable) { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s(%d)\n", __FUNCTION__, enable); + dprintk("%s(%d)\n", __func__, enable); return s5h1409_writereg(state, 0xf2, enable); } @@ -461,7 +461,7 @@ static int s5h1409_register_reset(struct dvb_frontend* fe) { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s()\n", __FUNCTION__); + dprintk("%s()\n", __func__); return s5h1409_writereg(state, 0xfa, 0); } @@ -534,7 +534,7 @@ static int s5h1409_set_frontend (struct dvb_frontend* fe, { struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s(frequency=%d)\n", __FUNCTION__, p->frequency); + dprintk("%s(frequency=%d)\n", __func__, p->frequency); s5h1409_softreset(fe); @@ -565,7 +565,7 @@ static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode) struct s5h1409_state *state = fe->demodulator_priv; u16 val; - dprintk("%s(%d)\n", __FUNCTION__, mode); + dprintk("%s(%d)\n", __func__, mode); val = s5h1409_readreg(state, 0xac) & 0xcfff; switch (mode) { @@ -573,7 +573,7 @@ static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode) val |= 0x0000; break; case S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK: - dprintk("%s(%d) Mode1 or Defaulting\n", __FUNCTION__, mode); + dprintk("%s(%d) Mode1 or Defaulting\n", __func__, mode); val |= 0x1000; break; case S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK: @@ -597,7 +597,7 @@ static int s5h1409_init (struct dvb_frontend* fe) int i; struct s5h1409_state* state = fe->demodulator_priv; - dprintk("%s()\n", __FUNCTION__); + dprintk("%s()\n", __func__); s5h1409_sleep(fe, 0); s5h1409_register_reset(fe); @@ -663,7 +663,7 @@ static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) break; } - dprintk("%s() status 0x%08x\n", __FUNCTION__, *status); + dprintk("%s() status 0x%08x\n", __func__, *status); return 0; } @@ -671,7 +671,7 @@ static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) static int s5h1409_qam256_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) { int i, ret = -EINVAL; - dprintk("%s()\n", __FUNCTION__); + dprintk("%s()\n", __func__); for (i=0; i < ARRAY_SIZE(qam256_snr_tab); i++) { if (v < qam256_snr_tab[i].val) { @@ -686,7 +686,7 @@ static int s5h1409_qam256_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) static int s5h1409_qam64_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) { int i, ret = -EINVAL; - dprintk("%s()\n", __FUNCTION__); + dprintk("%s()\n", __func__); for (i=0; i < ARRAY_SIZE(qam64_snr_tab); i++) { if (v < qam64_snr_tab[i].val) { @@ -701,7 +701,7 @@ static int s5h1409_qam64_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) static int s5h1409_vsb_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) { int i, ret = -EINVAL; - dprintk("%s()\n", __FUNCTION__); + dprintk("%s()\n", __func__); for (i=0; i < ARRAY_SIZE(vsb_snr_tab); i++) { if (v > vsb_snr_tab[i].val) { @@ -710,7 +710,7 @@ static int s5h1409_vsb_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) break; } } - dprintk("%s() snr=%d\n", __FUNCTION__, *snr); + dprintk("%s() snr=%d\n", __func__, *snr); return ret; } @@ -718,7 +718,7 @@ static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr) { struct s5h1409_state* state = fe->demodulator_priv; u16 reg; - dprintk("%s()\n", __FUNCTION__); + dprintk("%s()\n", __func__); switch(state->current_modulation) { case QAM_64: @@ -812,7 +812,7 @@ struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, if (s5h1409_init(&state->frontend) != 0) { printk(KERN_ERR "%s: Failed to initialize correctly\n", - __FUNCTION__); + __func__); goto error; } diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h index f0bb13fe808..59f4335964c 100644 --- a/drivers/media/dvb/frontends/s5h1409.h +++ b/drivers/media/dvb/frontends/s5h1409.h @@ -67,7 +67,7 @@ extern struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, static inline struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif /* CONFIG_DVB_S5H1409 */ diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c new file mode 100644 index 00000000000..eb5bfc99d4e --- /dev/null +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -0,0 +1,888 @@ +/* + Samsung S5H1411 VSB/QAM demodulator driver + + Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include "dvb_frontend.h" +#include "dvb-pll.h" +#include "s5h1411.h" + +struct s5h1411_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct s5h1411_config *config; + + struct dvb_frontend frontend; + + fe_modulation_t current_modulation; + + u32 current_frequency; + int if_freq; + + u8 inversion; +}; + +static int debug; + +#define dprintk(arg...) do { \ + if (debug) \ + printk(arg); \ + } while (0) + +/* Register values to initialise the demod, defaults to VSB */ +static struct init_tab { + u8 addr; + u8 reg; + u16 data; +} init_tab[] = { + { S5H1411_I2C_TOP_ADDR, 0x00, 0x0071, }, + { S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, }, + { S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, }, + { S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, }, + { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342a, }, + { S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, }, + { S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, }, + { S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, }, + { S5H1411_I2C_TOP_ADDR, 0x27, 0x0f04, }, + { S5H1411_I2C_TOP_ADDR, 0x28, 0x070f, }, + { S5H1411_I2C_TOP_ADDR, 0x29, 0x2820, }, + { S5H1411_I2C_TOP_ADDR, 0x2a, 0x102e, }, + { S5H1411_I2C_TOP_ADDR, 0x2b, 0x0220, }, + { S5H1411_I2C_TOP_ADDR, 0x2e, 0x0d0e, }, + { S5H1411_I2C_TOP_ADDR, 0x2f, 0x1013, }, + { S5H1411_I2C_TOP_ADDR, 0x31, 0x171b, }, + { S5H1411_I2C_TOP_ADDR, 0x32, 0x0e0f, }, + { S5H1411_I2C_TOP_ADDR, 0x33, 0x0f10, }, + { S5H1411_I2C_TOP_ADDR, 0x34, 0x170e, }, + { S5H1411_I2C_TOP_ADDR, 0x35, 0x4b10, }, + { S5H1411_I2C_TOP_ADDR, 0x36, 0x0f17, }, + { S5H1411_I2C_TOP_ADDR, 0x3c, 0x1577, }, + { S5H1411_I2C_TOP_ADDR, 0x3d, 0x081a, }, + { S5H1411_I2C_TOP_ADDR, 0x3e, 0x77ee, }, + { S5H1411_I2C_TOP_ADDR, 0x40, 0x1e09, }, + { S5H1411_I2C_TOP_ADDR, 0x41, 0x0f0c, }, + { S5H1411_I2C_TOP_ADDR, 0x42, 0x1f10, }, + { S5H1411_I2C_TOP_ADDR, 0x4d, 0x0509, }, + { S5H1411_I2C_TOP_ADDR, 0x4e, 0x0a00, }, + { S5H1411_I2C_TOP_ADDR, 0x50, 0x0000, }, + { S5H1411_I2C_TOP_ADDR, 0x5b, 0x0000, }, + { S5H1411_I2C_TOP_ADDR, 0x5c, 0x0008, }, + { S5H1411_I2C_TOP_ADDR, 0x57, 0x1101, }, + { S5H1411_I2C_TOP_ADDR, 0x65, 0x007c, }, + { S5H1411_I2C_TOP_ADDR, 0x68, 0x0512, }, + { S5H1411_I2C_TOP_ADDR, 0x69, 0x0258, }, + { S5H1411_I2C_TOP_ADDR, 0x70, 0x0004, }, + { S5H1411_I2C_TOP_ADDR, 0x71, 0x0007, }, + { S5H1411_I2C_TOP_ADDR, 0x76, 0x00a9, }, + { S5H1411_I2C_TOP_ADDR, 0x78, 0x3141, }, + { S5H1411_I2C_TOP_ADDR, 0x7a, 0x3141, }, + { S5H1411_I2C_TOP_ADDR, 0xb3, 0x8003, }, + { S5H1411_I2C_TOP_ADDR, 0xb5, 0xafbb, }, + { S5H1411_I2C_TOP_ADDR, 0xb5, 0xa6bb, }, + { S5H1411_I2C_TOP_ADDR, 0xb6, 0x0609, }, + { S5H1411_I2C_TOP_ADDR, 0xb7, 0x2f06, }, + { S5H1411_I2C_TOP_ADDR, 0xb8, 0x003f, }, + { S5H1411_I2C_TOP_ADDR, 0xb9, 0x2700, }, + { S5H1411_I2C_TOP_ADDR, 0xba, 0xfac8, }, + { S5H1411_I2C_TOP_ADDR, 0xbe, 0x1003, }, + { S5H1411_I2C_TOP_ADDR, 0xbf, 0x103f, }, + { S5H1411_I2C_TOP_ADDR, 0xce, 0x2000, }, + { S5H1411_I2C_TOP_ADDR, 0xcf, 0x0800, }, + { S5H1411_I2C_TOP_ADDR, 0xd0, 0x0800, }, + { S5H1411_I2C_TOP_ADDR, 0xd1, 0x0400, }, + { S5H1411_I2C_TOP_ADDR, 0xd2, 0x0800, }, + { S5H1411_I2C_TOP_ADDR, 0xd3, 0x2000, }, + { S5H1411_I2C_TOP_ADDR, 0xd4, 0x3000, }, + { S5H1411_I2C_TOP_ADDR, 0xdb, 0x4a9b, }, + { S5H1411_I2C_TOP_ADDR, 0xdc, 0x1000, }, + { S5H1411_I2C_TOP_ADDR, 0xde, 0x0001, }, + { S5H1411_I2C_TOP_ADDR, 0xdf, 0x0000, }, + { S5H1411_I2C_TOP_ADDR, 0xe3, 0x0301, }, + { S5H1411_I2C_QAM_ADDR, 0xf3, 0x0000, }, + { S5H1411_I2C_QAM_ADDR, 0xf3, 0x0001, }, + { S5H1411_I2C_QAM_ADDR, 0x08, 0x0600, }, + { S5H1411_I2C_QAM_ADDR, 0x18, 0x4201, }, + { S5H1411_I2C_QAM_ADDR, 0x1e, 0x6476, }, + { S5H1411_I2C_QAM_ADDR, 0x21, 0x0830, }, + { S5H1411_I2C_QAM_ADDR, 0x0c, 0x5679, }, + { S5H1411_I2C_QAM_ADDR, 0x0d, 0x579b, }, + { S5H1411_I2C_QAM_ADDR, 0x24, 0x0102, }, + { S5H1411_I2C_QAM_ADDR, 0x31, 0x7488, }, + { S5H1411_I2C_QAM_ADDR, 0x32, 0x0a08, }, + { S5H1411_I2C_QAM_ADDR, 0x3d, 0x8689, }, + { S5H1411_I2C_QAM_ADDR, 0x49, 0x0048, }, + { S5H1411_I2C_QAM_ADDR, 0x57, 0x2012, }, + { S5H1411_I2C_QAM_ADDR, 0x5d, 0x7676, }, + { S5H1411_I2C_QAM_ADDR, 0x04, 0x0400, }, + { S5H1411_I2C_QAM_ADDR, 0x58, 0x00c0, }, + { S5H1411_I2C_QAM_ADDR, 0x5b, 0x0100, }, +}; + +/* VSB SNR lookup table */ +static struct vsb_snr_tab { + u16 val; + u16 data; +} vsb_snr_tab[] = { + { 0x39f, 300, }, + { 0x39b, 295, }, + { 0x397, 290, }, + { 0x394, 285, }, + { 0x38f, 280, }, + { 0x38b, 275, }, + { 0x387, 270, }, + { 0x382, 265, }, + { 0x37d, 260, }, + { 0x377, 255, }, + { 0x370, 250, }, + { 0x36a, 245, }, + { 0x364, 240, }, + { 0x35b, 235, }, + { 0x353, 230, }, + { 0x349, 225, }, + { 0x340, 320, }, + { 0x337, 215, }, + { 0x327, 210, }, + { 0x31b, 205, }, + { 0x310, 200, }, + { 0x302, 195, }, + { 0x2f3, 190, }, + { 0x2e4, 185, }, + { 0x2d7, 180, }, + { 0x2cd, 175, }, + { 0x2bb, 170, }, + { 0x2a9, 165, }, + { 0x29e, 160, }, + { 0x284, 155, }, + { 0x27a, 150, }, + { 0x260, 145, }, + { 0x23a, 140, }, + { 0x224, 135, }, + { 0x213, 130, }, + { 0x204, 125, }, + { 0x1fe, 120, }, + { 0, 0, }, +}; + +/* QAM64 SNR lookup table */ +static struct qam64_snr_tab { + u16 val; + u16 data; +} qam64_snr_tab[] = { + { 0x0001, 0, }, + { 0x0af0, 300, }, + { 0x0d80, 290, }, + { 0x10a0, 280, }, + { 0x14b5, 270, }, + { 0x1590, 268, }, + { 0x1680, 266, }, + { 0x17b0, 264, }, + { 0x18c0, 262, }, + { 0x19b0, 260, }, + { 0x1ad0, 258, }, + { 0x1d00, 256, }, + { 0x1da0, 254, }, + { 0x1ef0, 252, }, + { 0x2050, 250, }, + { 0x20f0, 249, }, + { 0x21d0, 248, }, + { 0x22b0, 247, }, + { 0x23a0, 246, }, + { 0x2470, 245, }, + { 0x24f0, 244, }, + { 0x25a0, 243, }, + { 0x26c0, 242, }, + { 0x27b0, 241, }, + { 0x28d0, 240, }, + { 0x29b0, 239, }, + { 0x2ad0, 238, }, + { 0x2ba0, 237, }, + { 0x2c80, 236, }, + { 0x2d20, 235, }, + { 0x2e00, 234, }, + { 0x2f10, 233, }, + { 0x3050, 232, }, + { 0x3190, 231, }, + { 0x3300, 230, }, + { 0x3340, 229, }, + { 0x3200, 228, }, + { 0x3550, 227, }, + { 0x3610, 226, }, + { 0x3600, 225, }, + { 0x3700, 224, }, + { 0x3800, 223, }, + { 0x3920, 222, }, + { 0x3a20, 221, }, + { 0x3b30, 220, }, + { 0x3d00, 219, }, + { 0x3e00, 218, }, + { 0x4000, 217, }, + { 0x4100, 216, }, + { 0x4300, 215, }, + { 0x4400, 214, }, + { 0x4600, 213, }, + { 0x4700, 212, }, + { 0x4800, 211, }, + { 0x4a00, 210, }, + { 0x4b00, 209, }, + { 0x4d00, 208, }, + { 0x4f00, 207, }, + { 0x5050, 206, }, + { 0x5200, 205, }, + { 0x53c0, 204, }, + { 0x5450, 203, }, + { 0x5650, 202, }, + { 0x5820, 201, }, + { 0x6000, 200, }, + { 0xffff, 0, }, +}; + +/* QAM256 SNR lookup table */ +static struct qam256_snr_tab { + u16 val; + u16 data; +} qam256_snr_tab[] = { + { 0x0001, 0, }, + { 0x0970, 400, }, + { 0x0a90, 390, }, + { 0x0b90, 380, }, + { 0x0d90, 370, }, + { 0x0ff0, 360, }, + { 0x1240, 350, }, + { 0x1345, 348, }, + { 0x13c0, 346, }, + { 0x14c0, 344, }, + { 0x1500, 342, }, + { 0x1610, 340, }, + { 0x1700, 338, }, + { 0x1800, 336, }, + { 0x18b0, 334, }, + { 0x1900, 332, }, + { 0x1ab0, 330, }, + { 0x1bc0, 328, }, + { 0x1cb0, 326, }, + { 0x1db0, 324, }, + { 0x1eb0, 322, }, + { 0x2030, 320, }, + { 0x2200, 318, }, + { 0x2280, 316, }, + { 0x2410, 314, }, + { 0x25b0, 312, }, + { 0x27a0, 310, }, + { 0x2840, 308, }, + { 0x29d0, 306, }, + { 0x2b10, 304, }, + { 0x2d30, 302, }, + { 0x2f20, 300, }, + { 0x30c0, 298, }, + { 0x3260, 297, }, + { 0x32c0, 296, }, + { 0x3300, 295, }, + { 0x33b0, 294, }, + { 0x34b0, 293, }, + { 0x35a0, 292, }, + { 0x3650, 291, }, + { 0x3800, 290, }, + { 0x3900, 289, }, + { 0x3a50, 288, }, + { 0x3b30, 287, }, + { 0x3cb0, 286, }, + { 0x3e20, 285, }, + { 0x3fa0, 284, }, + { 0x40a0, 283, }, + { 0x41c0, 282, }, + { 0x42f0, 281, }, + { 0x44a0, 280, }, + { 0x4600, 279, }, + { 0x47b0, 278, }, + { 0x4900, 277, }, + { 0x4a00, 276, }, + { 0x4ba0, 275, }, + { 0x4d00, 274, }, + { 0x4f00, 273, }, + { 0x5000, 272, }, + { 0x51f0, 272, }, + { 0x53a0, 270, }, + { 0x5520, 269, }, + { 0x5700, 268, }, + { 0x5800, 267, }, + { 0x5a00, 266, }, + { 0x5c00, 265, }, + { 0x5d00, 264, }, + { 0x5f00, 263, }, + { 0x6000, 262, }, + { 0x6200, 261, }, + { 0x6400, 260, }, + { 0xffff, 0, }, +}; + +/* 8 bit registers, 16 bit values */ +static int s5h1411_writereg(struct s5h1411_state *state, + u8 addr, u8 reg, u16 data) +{ + int ret; + u8 buf [] = { reg, data >> 8, data & 0xff }; + + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, " + "ret == %i)\n", __func__, addr, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static u16 s5h1411_readreg(struct s5h1411_state *state, u8 addr, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0, 0 }; + + struct i2c_msg msg [] = { + { .addr = addr, .flags = 0, .buf = b0, .len = 1 }, + { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + return (b1[0] << 8) | b1[1]; +} + +static int s5h1411_softreset(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf7, 0); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf7, 1); + return 0; +} + +static int s5h1411_set_if_freq(struct dvb_frontend *fe, int KHz) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(%d KHz)\n", __func__, KHz); + + switch (KHz) { + case 3250: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d9); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x5342); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x10d9); + break; + case 3500: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x1225); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x1e96); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x1225); + break; + case 4000: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x14bc); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0xb53e); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x14bd); + break; + default: + dprintk("%s(%d KHz) Invalid, defaulting to 5380\n", + __func__, KHz); + /* no break, need to continue */ + case 5380: + case 44000: + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x1be4); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x3655); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x1be4); + break; + } + + state->if_freq = KHz; + + return 0; +} + +static int s5h1411_set_mpeg_timing(struct dvb_frontend *fe, int mode) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, mode); + + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbe) & 0xcfff; + switch (mode) { + case S5H1411_MPEGTIMING_CONTINOUS_INVERTING_CLOCK: + val |= 0x0000; + break; + case S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK: + dprintk("%s(%d) Mode1 or Defaulting\n", __func__, mode); + val |= 0x1000; + break; + case S5H1411_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK: + val |= 0x2000; + break; + case S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK: + val |= 0x3000; + break; + default: + return -EINVAL; + } + + /* Configure MPEG Signal Timing charactistics */ + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbe, val); +} + +static int s5h1411_set_spectralinversion(struct dvb_frontend *fe, int inversion) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, inversion); + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x24) & ~0x1000; + + if (inversion == 1) + val |= 0x1000; /* Inverted */ + else + val |= 0x0000; + + state->inversion = inversion; + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x24, val); +} + +static int s5h1411_enable_modulation(struct dvb_frontend *fe, + fe_modulation_t m) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(0x%08x)\n", __func__, m); + + switch (m) { + case VSB_8: + dprintk("%s() VSB_8\n", __func__); + s5h1411_set_if_freq(fe, state->config->vsb_if); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x71); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf6, 0x00); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xcd, 0xf1); + break; + case QAM_64: + case QAM_256: + dprintk("%s() QAM_AUTO (64/256)\n", __func__); + s5h1411_set_if_freq(fe, state->config->qam_if); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf6, 0x0001); + s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x16, 0x1101); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xcd, 0x00f0); + break; + default: + dprintk("%s() Invalid modulation\n", __func__); + return -EINVAL; + } + + state->current_modulation = m; + s5h1411_softreset(fe); + + return 0; +} + +static int s5h1411_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 1); + else + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 0); +} + +static int s5h1411_set_gpio(struct dvb_frontend *fe, int enable) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, enable); + + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xe0) & ~0x02; + + if (enable) + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, + val | 0x02); + else + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, val); +} + +static int s5h1411_sleep(struct dvb_frontend *fe, int enable) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf4, 1); + else { + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf4, 0); + s5h1411_softreset(fe); + } + + return 0; +} + +static int s5h1411_register_reset(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf3, 0); +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int s5h1411_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + dprintk("%s(frequency=%d)\n", __func__, p->frequency); + + s5h1411_softreset(fe); + + state->current_frequency = p->frequency; + + s5h1411_enable_modulation(fe, p->u.vsb.modulation); + + /* Allow the demod to settle */ + msleep(100); + + if (fe->ops.tuner_ops.set_params) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.set_params(fe, p); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + return 0; +} + +/* Reset the demod hardware and reset all of the configuration registers + to a default state. */ +static int s5h1411_init(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + int i; + + dprintk("%s()\n", __func__); + + s5h1411_sleep(fe, 0); + s5h1411_register_reset(fe); + + for (i = 0; i < ARRAY_SIZE(init_tab); i++) + s5h1411_writereg(state, init_tab[i].addr, + init_tab[i].reg, + init_tab[i].data); + + /* The datasheet says that after initialisation, VSB is default */ + state->current_modulation = VSB_8; + + if (state->config->output_mode == S5H1411_SERIAL_OUTPUT) + /* Serial */ + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1101); + else + /* Parallel */ + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1001); + + s5h1411_set_spectralinversion(fe, state->config->inversion); + s5h1411_set_if_freq(fe, state->config->vsb_if); + s5h1411_set_gpio(fe, state->config->gpio); + s5h1411_set_mpeg_timing(fe, state->config->mpeg_timing); + s5h1411_softreset(fe); + + /* Note: Leaving the I2C gate closed. */ + s5h1411_i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int s5h1411_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 reg; + u32 tuner_status = 0; + + *status = 0; + + /* Get the demodulator status */ + reg = (s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2) >> 15) + & 0x0001; + if (reg) + *status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_SIGNAL; + + switch (state->current_modulation) { + case QAM_64: + case QAM_256: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf0); + if (reg & 0x100) + *status |= FE_HAS_VITERBI; + if (reg & 0x10) + *status |= FE_HAS_SYNC; + break; + case VSB_8: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x5e); + if (reg & 0x0001) + *status |= FE_HAS_SYNC; + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2); + if (reg & 0x1000) + *status |= FE_HAS_VITERBI; + break; + default: + return -EINVAL; + } + + switch (state->config->status_mode) { + case S5H1411_DEMODLOCKING: + if (*status & FE_HAS_VITERBI) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + case S5H1411_TUNERLOCKING: + /* Get the tuner status */ + if (fe->ops.tuner_ops.get_status) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.get_status(fe, &tuner_status); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + if (tuner_status) + *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; + } + + dprintk("%s() status 0x%08x\n", __func__, *status); + + return 0; +} + +static int s5h1411_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) { + if (v < qam256_snr_tab[i].val) { + *snr = qam256_snr_tab[i].data; + ret = 0; + break; + } + } + return ret; +} + +static int s5h1411_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) { + if (v < qam64_snr_tab[i].val) { + *snr = qam64_snr_tab[i].data; + ret = 0; + break; + } + } + return ret; +} + +static int s5h1411_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) +{ + int i, ret = -EINVAL; + dprintk("%s()\n", __func__); + + for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) { + if (v > vsb_snr_tab[i].val) { + *snr = vsb_snr_tab[i].data; + ret = 0; + break; + } + } + dprintk("%s() snr=%d\n", __func__, *snr); + return ret; +} + +static int s5h1411_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 reg; + dprintk("%s()\n", __func__); + + switch (state->current_modulation) { + case QAM_64: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf1); + return s5h1411_qam64_lookup_snr(fe, snr, reg); + case QAM_256: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf1); + return s5h1411_qam256_lookup_snr(fe, snr, reg); + case VSB_8: + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, + 0xf2) & 0x3ff; + return s5h1411_vsb_lookup_snr(fe, snr, reg); + default: + break; + } + + return -EINVAL; +} + +static int s5h1411_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + return s5h1411_read_snr(fe, signal_strength); +} + +static int s5h1411_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + *ucblocks = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xc9); + + return 0; +} + +static int s5h1411_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return s5h1411_read_ucblocks(fe, ber); +} + +static int s5h1411_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct s5h1411_state *state = fe->demodulator_priv; + + p->frequency = state->current_frequency; + p->u.vsb.modulation = state->current_modulation; + + return 0; +} + +static int s5h1411_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void s5h1411_release(struct dvb_frontend *fe) +{ + struct s5h1411_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops s5h1411_ops; + +struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config, + struct i2c_adapter *i2c) +{ + struct s5h1411_state *state = NULL; + u16 reg; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct s5h1411_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->current_modulation = VSB_8; + state->inversion = state->config->inversion; + + /* check if the demod exists */ + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x05); + if (reg != 0x0066) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s5h1411_ops, + sizeof(struct dvb_frontend_ops)); + + state->frontend.demodulator_priv = state; + + if (s5h1411_init(&state->frontend) != 0) { + printk(KERN_ERR "%s: Failed to initialize correctly\n", + __func__); + goto error; + } + + /* Note: Leaving the I2C gate open here. */ + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xf5, 1); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(s5h1411_attach); + +static struct dvb_frontend_ops s5h1411_ops = { + + .info = { + .name = "Samsung S5H1411 QAM/8VSB Frontend", + .type = FE_ATSC, + .frequency_min = 54000000, + .frequency_max = 858000000, + .frequency_stepsize = 62500, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + + .init = s5h1411_init, + .i2c_gate_ctrl = s5h1411_i2c_gate_ctrl, + .set_frontend = s5h1411_set_frontend, + .get_frontend = s5h1411_get_frontend, + .get_tune_settings = s5h1411_get_tune_settings, + .read_status = s5h1411_read_status, + .read_ber = s5h1411_read_ber, + .read_signal_strength = s5h1411_read_signal_strength, + .read_snr = s5h1411_read_snr, + .read_ucblocks = s5h1411_read_ucblocks, + .release = s5h1411_release, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Samsung S5H1411 QAM-B/ATSC Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h new file mode 100644 index 00000000000..1855f64ed4d --- /dev/null +++ b/drivers/media/dvb/frontends/s5h1411.h @@ -0,0 +1,90 @@ +/* + Samsung S5H1411 VSB/QAM demodulator driver + + Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef __S5H1411_H__ +#define __S5H1411_H__ + +#include <linux/dvb/frontend.h> + +#define S5H1411_I2C_TOP_ADDR (0x32 >> 1) +#define S5H1411_I2C_QAM_ADDR (0x34 >> 1) + +struct s5h1411_config { + + /* serial/parallel output */ +#define S5H1411_PARALLEL_OUTPUT 0 +#define S5H1411_SERIAL_OUTPUT 1 + u8 output_mode; + + /* GPIO Setting */ +#define S5H1411_GPIO_OFF 0 +#define S5H1411_GPIO_ON 1 + u8 gpio; + + /* MPEG signal timing */ +#define S5H1411_MPEGTIMING_CONTINOUS_INVERTING_CLOCK 0 +#define S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK 1 +#define S5H1411_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK 2 +#define S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3 + u16 mpeg_timing; + + /* IF Freq for QAM and VSB in KHz */ +#define S5H1411_IF_2500 2500 +#define S5H1411_IF_3500 3500 +#define S5H1411_IF_4000 4000 +#define S5H1411_IF_5380 5380 +#define S5H1411_IF_44000 44000 +#define S5H1411_VSB_IF_DEFAULT S5H1411_IF_44000 +#define S5H1411_QAM_IF_DEFAULT S5H1411_IF_44000 + u16 qam_if; + u16 vsb_if; + + /* Spectral Inversion */ +#define S5H1411_INVERSION_OFF 0 +#define S5H1411_INVERSION_ON 1 + u8 inversion; + + /* Return lock status based on tuner lock, or demod lock */ +#define S5H1411_TUNERLOCKING 0 +#define S5H1411_DEMODLOCKING 1 + u8 status_mode; +}; + +#if defined(CONFIG_DVB_S5H1411) || \ + (defined(CONFIG_DVB_S5H1411_MODULE) && defined(MODULE)) +extern struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *s5h1411_attach( + const struct s5h1411_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_S5H1411 */ + +#endif /* __S5H1411_H__ */ + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c index 2c2c344c4c6..720ed9ff7c5 100644 --- a/drivers/media/dvb/frontends/s5h1420.c +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -1,24 +1,26 @@ /* -Driver for Samsung S5H1420 QPSK Demodulator - -Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ + * Driver for + * Samsung S5H1420 and + * PnpNetwork PN1010 QPSK Demodulator + * + * Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> + * Copyright (C) 2005-8 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ #include <linux/kernel.h> #include <linux/module.h> @@ -29,23 +31,35 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. #include <linux/jiffies.h> #include <asm/div64.h> -#include "dvb_frontend.h" -#include "s5h1420.h" +#include <linux/i2c.h> +#include "dvb_frontend.h" +#include "s5h1420.h" +#include "s5h1420_priv.h" #define TONE_FREQ 22000 struct s5h1420_state { struct i2c_adapter* i2c; const struct s5h1420_config* config; + struct dvb_frontend frontend; + struct i2c_adapter tuner_i2c_adapter; + + u8 CON_1_val; u8 postlocked:1; u32 fclk; u32 tunedfreq; fe_code_rate_t fec_inner; u32 symbol_rate; + + /* FIXME: ugly workaround for flexcop's incapable i2c-controller + * it does not support repeated-start, workaround: write addr-1 + * and then read + */ + u8 shadow[255]; }; static u32 s5h1420_getsymbolrate(struct s5h1420_state* state); @@ -53,44 +67,66 @@ static int s5h1420_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings); -static int debug = 0; -#define dprintk if (debug) printk +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debugging"); + +#define dprintk(x...) do { \ + if (debug) \ + printk(KERN_DEBUG "S5H1420: " x); \ +} while (0) + +static u8 s5h1420_readreg(struct s5h1420_state *state, u8 reg) +{ + int ret; + u8 b[2]; + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = 2 }, + { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = 1 }, + }; + + b[0] = (reg - 1) & 0xff; + b[1] = state->shadow[(reg - 1) & 0xff]; + + if (state->config->repeated_start_workaround) { + ret = i2c_transfer(state->i2c, msg, 3); + if (ret != 3) + return ret; + } else { + ret = i2c_transfer(state->i2c, &msg[1], 2); + if (ret != 2) + return ret; + } + + /* dprintk("rd(%02x): %02x %02x\n", state->config->demod_address, reg, b[0]); */ + + return b[0]; +} static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data) { - u8 buf [] = { reg, data }; + u8 buf[] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; int err; - if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data); + /* dprintk("wr(%02x): %02x %02x\n", state->config->demod_address, reg, data); */ + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + dprintk("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); return -EREMOTEIO; } + state->shadow[reg] = data; return 0; } -static u8 s5h1420_readreg (struct s5h1420_state* state, u8 reg) -{ - int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0 }; - struct i2c_msg msg1 = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }; - struct i2c_msg msg2 = { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 }; - - if ((ret = i2c_transfer (state->i2c, &msg1, 1)) != 1) - return ret; - - if ((ret = i2c_transfer (state->i2c, &msg2, 1)) != 1) - return ret; - - return b1[0]; -} - static int s5h1420_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) { struct s5h1420_state* state = fe->demodulator_priv; + dprintk("enter %s\n", __func__); + switch(voltage) { case SEC_VOLTAGE_13: s5h1420_writereg(state, 0x3c, @@ -106,6 +142,7 @@ static int s5h1420_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag break; } + dprintk("leave %s\n", __func__); return 0; } @@ -113,6 +150,7 @@ static int s5h1420_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { struct s5h1420_state* state = fe->demodulator_priv; + dprintk("enter %s\n", __func__); switch(tone) { case SEC_TONE_ON: s5h1420_writereg(state, 0x3b, @@ -124,6 +162,7 @@ static int s5h1420_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) (s5h1420_readreg(state, 0x3b) & 0x74) | 0x01); break; } + dprintk("leave %s\n", __func__); return 0; } @@ -137,6 +176,7 @@ static int s5h1420_send_master_cmd (struct dvb_frontend* fe, unsigned long timeout; int result = 0; + dprintk("enter %s\n", __func__); if (cmd->msg_len > 8) return -EINVAL; @@ -168,6 +208,7 @@ static int s5h1420_send_master_cmd (struct dvb_frontend* fe, /* restore original settings */ s5h1420_writereg(state, 0x3b, val); msleep(15); + dprintk("leave %s\n", __func__); return result; } @@ -289,6 +330,8 @@ static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status) struct s5h1420_state* state = fe->demodulator_priv; u8 val; + dprintk("enter %s\n", __func__); + if (status == NULL) return -EINVAL; @@ -297,13 +340,13 @@ static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status) /* fix for FEC 5/6 inversion issue - if it doesn't quite lock, invert the inversion, wait a bit and check again */ - if (*status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI)) { - val = s5h1420_readreg(state, 0x32); + if (*status == (FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI)) { + val = s5h1420_readreg(state, Vit10); if ((val & 0x07) == 0x03) { if (val & 0x08) - s5h1420_writereg(state, 0x31, 0x13); + s5h1420_writereg(state, Vit09, 0x13); else - s5h1420_writereg(state, 0x31, 0x1b); + s5h1420_writereg(state, Vit09, 0x1b); /* wait a bit then update lock status */ mdelay(200); @@ -312,68 +355,73 @@ static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status) } /* perform post lock setup */ - if ((*status & FE_HAS_LOCK) && (!state->postlocked)) { + if ((*status & FE_HAS_LOCK) && !state->postlocked) { /* calculate the data rate */ u32 tmp = s5h1420_getsymbolrate(state); - switch(s5h1420_readreg(state, 0x32) & 0x07) { - case 0: - tmp = (tmp * 2 * 1) / 2; - break; - - case 1: - tmp = (tmp * 2 * 2) / 3; - break; - - case 2: - tmp = (tmp * 2 * 3) / 4; - break; - - case 3: - tmp = (tmp * 2 * 5) / 6; - break; - - case 4: - tmp = (tmp * 2 * 6) / 7; - break; - - case 5: - tmp = (tmp * 2 * 7) / 8; - break; + switch (s5h1420_readreg(state, Vit10) & 0x07) { + case 0: tmp = (tmp * 2 * 1) / 2; break; + case 1: tmp = (tmp * 2 * 2) / 3; break; + case 2: tmp = (tmp * 2 * 3) / 4; break; + case 3: tmp = (tmp * 2 * 5) / 6; break; + case 4: tmp = (tmp * 2 * 6) / 7; break; + case 5: tmp = (tmp * 2 * 7) / 8; break; } + if (tmp == 0) { - printk("s5h1420: avoided division by 0\n"); + printk(KERN_ERR "s5h1420: avoided division by 0\n"); tmp = 1; } tmp = state->fclk / tmp; + /* set the MPEG_CLK_INTL for the calculated data rate */ - if (tmp < 4) + if (tmp < 2) val = 0x00; - else if (tmp < 8) + else if (tmp < 5) val = 0x01; - else if (tmp < 12) + else if (tmp < 9) val = 0x02; - else if (tmp < 16) + else if (tmp < 13) val = 0x03; - else if (tmp < 24) + else if (tmp < 17) val = 0x04; - else if (tmp < 32) + else if (tmp < 25) val = 0x05; - else + else if (tmp < 33) val = 0x06; - s5h1420_writereg(state, 0x22, val); + else + val = 0x07; + dprintk("for MPEG_CLK_INTL %d %x\n", tmp, val); + + s5h1420_writereg(state, FEC01, 0x18); + s5h1420_writereg(state, FEC01, 0x10); + s5h1420_writereg(state, FEC01, val); + + /* Enable "MPEG_Out" */ + val = s5h1420_readreg(state, Mpeg02); + s5h1420_writereg(state, Mpeg02, val | (1 << 6)); - /* DC freeze */ - s5h1420_writereg(state, 0x1f, s5h1420_readreg(state, 0x1f) | 0x01); + /* kicker disable */ + val = s5h1420_readreg(state, QPSK01) & 0x7f; + s5h1420_writereg(state, QPSK01, val); - /* kicker disable + remove DC offset */ - s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) & 0x6f); + /* DC freeze TODO it was never activated by default or it can stay activated */ + + if (s5h1420_getsymbolrate(state) >= 20000000) { + s5h1420_writereg(state, Loop04, 0x8a); + s5h1420_writereg(state, Loop05, 0x6a); + } else { + s5h1420_writereg(state, Loop04, 0x58); + s5h1420_writereg(state, Loop05, 0x27); + } /* post-lock processing has been done! */ state->postlocked = 1; } + dprintk("leave %s\n", __func__); + return 0; } @@ -414,6 +462,7 @@ static int s5h1420_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static void s5h1420_reset(struct s5h1420_state* state) { + dprintk("%s\n", __func__); s5h1420_writereg (state, 0x01, 0x08); s5h1420_writereg (state, 0x01, 0x00); udelay(10); @@ -422,54 +471,52 @@ static void s5h1420_reset(struct s5h1420_state* state) static void s5h1420_setsymbolrate(struct s5h1420_state* state, struct dvb_frontend_parameters *p) { + u8 v; u64 val; + dprintk("enter %s\n", __func__); + val = ((u64) p->u.qpsk.symbol_rate / 1000ULL) * (1ULL<<24); - if (p->u.qpsk.symbol_rate <= 21000000) { + if (p->u.qpsk.symbol_rate < 29000000) val *= 2; - } do_div(val, (state->fclk / 1000)); - s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0x7f); - s5h1420_writereg(state, 0x11, val >> 16); - s5h1420_writereg(state, 0x12, val >> 8); - s5h1420_writereg(state, 0x13, val & 0xff); - s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x80); + dprintk("symbol rate register: %06llx\n", (unsigned long long)val); + + v = s5h1420_readreg(state, Loop01); + s5h1420_writereg(state, Loop01, v & 0x7f); + s5h1420_writereg(state, Tnco01, val >> 16); + s5h1420_writereg(state, Tnco02, val >> 8); + s5h1420_writereg(state, Tnco03, val & 0xff); + s5h1420_writereg(state, Loop01, v | 0x80); + dprintk("leave %s\n", __func__); } static u32 s5h1420_getsymbolrate(struct s5h1420_state* state) { - u64 val = 0; - int sampling = 2; - - if (s5h1420_readreg(state, 0x05) & 0x2) - sampling = 1; - - s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08); - val = s5h1420_readreg(state, 0x11) << 16; - val |= s5h1420_readreg(state, 0x12) << 8; - val |= s5h1420_readreg(state, 0x13); - s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7); - - val *= (state->fclk / 1000ULL); - do_div(val, ((1<<24) * sampling)); - - return (u32) (val * 1000ULL); + return state->symbol_rate; } static void s5h1420_setfreqoffset(struct s5h1420_state* state, int freqoffset) { int val; + u8 v; + + dprintk("enter %s\n", __func__); /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so * divide fclk by 1000000 to get the correct value. */ val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000)); - s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0xbf); - s5h1420_writereg(state, 0x0e, val >> 16); - s5h1420_writereg(state, 0x0f, val >> 8); - s5h1420_writereg(state, 0x10, val & 0xff); - s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x40); + dprintk("phase rotator/freqoffset: %d %06x\n", freqoffset, val); + + v = s5h1420_readreg(state, Loop01); + s5h1420_writereg(state, Loop01, v & 0xbf); + s5h1420_writereg(state, Pnco01, val >> 16); + s5h1420_writereg(state, Pnco02, val >> 8); + s5h1420_writereg(state, Pnco03, val & 0xff); + s5h1420_writereg(state, Loop01, v | 0x40); + dprintk("leave %s\n", __func__); } static int s5h1420_getfreqoffset(struct s5h1420_state* state) @@ -496,52 +543,53 @@ static void s5h1420_setfec_inversion(struct s5h1420_state* state, struct dvb_frontend_parameters *p) { u8 inversion = 0; + u8 vit08, vit09; + + dprintk("enter %s\n", __func__); - if (p->inversion == INVERSION_OFF) { + if (p->inversion == INVERSION_OFF) inversion = state->config->invert ? 0x08 : 0; - } else if (p->inversion == INVERSION_ON) { + else if (p->inversion == INVERSION_ON) inversion = state->config->invert ? 0 : 0x08; - } if ((p->u.qpsk.fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) { - s5h1420_writereg(state, 0x30, 0x3f); - s5h1420_writereg(state, 0x31, 0x00 | inversion); + vit08 = 0x3f; + vit09 = 0; } else { switch(p->u.qpsk.fec_inner) { case FEC_1_2: - s5h1420_writereg(state, 0x30, 0x01); - s5h1420_writereg(state, 0x31, 0x10 | inversion); + vit08 = 0x01; vit09 = 0x10; break; case FEC_2_3: - s5h1420_writereg(state, 0x30, 0x02); - s5h1420_writereg(state, 0x31, 0x11 | inversion); + vit08 = 0x02; vit09 = 0x11; break; case FEC_3_4: - s5h1420_writereg(state, 0x30, 0x04); - s5h1420_writereg(state, 0x31, 0x12 | inversion); + vit08 = 0x04; vit09 = 0x12; break; case FEC_5_6: - s5h1420_writereg(state, 0x30, 0x08); - s5h1420_writereg(state, 0x31, 0x13 | inversion); + vit08 = 0x08; vit09 = 0x13; break; case FEC_6_7: - s5h1420_writereg(state, 0x30, 0x10); - s5h1420_writereg(state, 0x31, 0x14 | inversion); + vit08 = 0x10; vit09 = 0x14; break; case FEC_7_8: - s5h1420_writereg(state, 0x30, 0x20); - s5h1420_writereg(state, 0x31, 0x15 | inversion); + vit08 = 0x20; vit09 = 0x15; break; default: return; } } + vit09 |= inversion; + dprintk("fec: %02x %02x\n", vit08, vit09); + s5h1420_writereg(state, Vit08, vit08); + s5h1420_writereg(state, Vit09, vit09); + dprintk("leave %s\n", __func__); } static fe_code_rate_t s5h1420_getfec(struct s5h1420_state* state) @@ -583,16 +631,19 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe, struct s5h1420_state* state = fe->demodulator_priv; int frequency_delta; struct dvb_frontend_tune_settings fesettings; + uint8_t clock_settting; + + dprintk("enter %s\n", __func__); /* check if we should do a fast-tune */ memcpy(&fesettings.parameters, p, sizeof(struct dvb_frontend_parameters)); s5h1420_get_tune_settings(fe, &fesettings); frequency_delta = p->frequency - state->tunedfreq; if ((frequency_delta > -fesettings.max_drift) && - (frequency_delta < fesettings.max_drift) && - (frequency_delta != 0) && - (state->fec_inner == p->u.qpsk.fec_inner) && - (state->symbol_rate == p->u.qpsk.symbol_rate)) { + (frequency_delta < fesettings.max_drift) && + (frequency_delta != 0) && + (state->fec_inner == p->u.qpsk.fec_inner) && + (state->symbol_rate == p->u.qpsk.symbol_rate)) { if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe, p); @@ -606,54 +657,93 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe, } else { s5h1420_setfreqoffset(state, 0); } + dprintk("simple tune\n"); return 0; } + dprintk("tuning demod\n"); /* first of all, software reset */ s5h1420_reset(state); /* set s5h1420 fclk PLL according to desired symbol rate */ - if (p->u.qpsk.symbol_rate > 28000000) { - state->fclk = 88000000; - s5h1420_writereg(state, 0x03, 0x50); - s5h1420_writereg(state, 0x04, 0x40); - s5h1420_writereg(state, 0x05, 0xae); - } else if (p->u.qpsk.symbol_rate > 21000000) { + if (p->u.qpsk.symbol_rate > 33000000) + state->fclk = 80000000; + else if (p->u.qpsk.symbol_rate > 28500000) state->fclk = 59000000; - s5h1420_writereg(state, 0x03, 0x33); - s5h1420_writereg(state, 0x04, 0x40); - s5h1420_writereg(state, 0x05, 0xae); - } else { + else if (p->u.qpsk.symbol_rate > 25000000) + state->fclk = 86000000; + else if (p->u.qpsk.symbol_rate > 1900000) state->fclk = 88000000; - s5h1420_writereg(state, 0x03, 0x50); - s5h1420_writereg(state, 0x04, 0x40); - s5h1420_writereg(state, 0x05, 0xac); + else + state->fclk = 44000000; + + /* Clock */ + switch (state->fclk) { + default: + case 88000000: + clock_settting = 80; + break; + case 86000000: + clock_settting = 78; + break; + case 80000000: + clock_settting = 72; + break; + case 59000000: + clock_settting = 51; + break; + case 44000000: + clock_settting = 36; + break; } + dprintk("pll01: %d, ToneFreq: %d\n", state->fclk/1000000 - 8, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); + s5h1420_writereg(state, PLL01, state->fclk/1000000 - 8); + s5h1420_writereg(state, PLL02, 0x40); + s5h1420_writereg(state, DiS01, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); - /* set misc registers */ - s5h1420_writereg(state, 0x02, 0x00); - s5h1420_writereg(state, 0x06, 0x00); - s5h1420_writereg(state, 0x07, 0xb0); - s5h1420_writereg(state, 0x0a, 0xe7); - s5h1420_writereg(state, 0x0b, 0x78); - s5h1420_writereg(state, 0x0c, 0x48); - s5h1420_writereg(state, 0x0d, 0x6b); - s5h1420_writereg(state, 0x2e, 0x8e); - s5h1420_writereg(state, 0x35, 0x33); - s5h1420_writereg(state, 0x38, 0x01); - s5h1420_writereg(state, 0x39, 0x7d); - s5h1420_writereg(state, 0x3a, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); - s5h1420_writereg(state, 0x3c, 0x00); - s5h1420_writereg(state, 0x45, 0x61); - s5h1420_writereg(state, 0x46, 0x1d); + /* TODO DC offset removal, config parameter ? */ + if (p->u.qpsk.symbol_rate > 29000000) + s5h1420_writereg(state, QPSK01, 0xae | 0x10); + else + s5h1420_writereg(state, QPSK01, 0xac | 0x10); - /* start QPSK */ - s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) | 1); + /* set misc registers */ + s5h1420_writereg(state, CON_1, 0x00); + s5h1420_writereg(state, QPSK02, 0x00); + s5h1420_writereg(state, Pre01, 0xb0); + + s5h1420_writereg(state, Loop01, 0xF0); + s5h1420_writereg(state, Loop02, 0x2a); /* e7 for s5h1420 */ + s5h1420_writereg(state, Loop03, 0x79); /* 78 for s5h1420 */ + if (p->u.qpsk.symbol_rate > 20000000) + s5h1420_writereg(state, Loop04, 0x79); + else + s5h1420_writereg(state, Loop04, 0x58); + s5h1420_writereg(state, Loop05, 0x6b); + + if (p->u.qpsk.symbol_rate >= 8000000) + s5h1420_writereg(state, Post01, (0 << 6) | 0x10); + else if (p->u.qpsk.symbol_rate >= 4000000) + s5h1420_writereg(state, Post01, (1 << 6) | 0x10); + else + s5h1420_writereg(state, Post01, (3 << 6) | 0x10); + + s5h1420_writereg(state, Monitor12, 0x00); /* unfreeze DC compensation */ + + s5h1420_writereg(state, Sync01, 0x33); + s5h1420_writereg(state, Mpeg01, state->config->cdclk_polarity); + s5h1420_writereg(state, Mpeg02, 0x3d); /* Parallel output more, disabled -> enabled later */ + s5h1420_writereg(state, Err01, 0x03); /* 0x1d for s5h1420 */ + + s5h1420_writereg(state, Vit06, 0x6e); /* 0x8e for s5h1420 */ + s5h1420_writereg(state, DiS03, 0x00); + s5h1420_writereg(state, Rf01, 0x61); /* Tuner i2c address - for the gate controller */ /* set tuner PLL */ if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe, p); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); s5h1420_setfreqoffset(state, 0); } @@ -661,10 +751,15 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe, s5h1420_setsymbolrate(state, p); s5h1420_setfec_inversion(state, p); + /* start QPSK */ + s5h1420_writereg(state, QPSK01, s5h1420_readreg(state, QPSK01) | 1); + state->fec_inner = p->u.qpsk.fec_inner; state->symbol_rate = p->u.qpsk.symbol_rate; state->postlocked = 0; state->tunedfreq = p->frequency; + + dprintk("leave %s\n", __func__); return 0; } @@ -717,11 +812,10 @@ static int s5h1420_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct s5h1420_state* state = fe->demodulator_priv; - if (enable) { - return s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) | 1); - } else { - return s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) & 0xfe); - } + if (enable) + return s5h1420_writereg(state, 0x02, state->CON_1_val | 1); + else + return s5h1420_writereg(state, 0x02, state->CON_1_val & 0xfe); } static int s5h1420_init (struct dvb_frontend* fe) @@ -729,7 +823,8 @@ static int s5h1420_init (struct dvb_frontend* fe) struct s5h1420_state* state = fe->demodulator_priv; /* disable power down and do reset */ - s5h1420_writereg(state, 0x02, 0x10); + state->CON_1_val = 0x10; + s5h1420_writereg(state, 0x02, state->CON_1_val); msleep(10); s5h1420_reset(state); @@ -739,26 +834,60 @@ static int s5h1420_init (struct dvb_frontend* fe) static int s5h1420_sleep(struct dvb_frontend* fe) { struct s5h1420_state* state = fe->demodulator_priv; - - return s5h1420_writereg(state, 0x02, 0x12); + state->CON_1_val = 0x12; + return s5h1420_writereg(state, 0x02, state->CON_1_val); } static void s5h1420_release(struct dvb_frontend* fe) { struct s5h1420_state* state = fe->demodulator_priv; + i2c_del_adapter(&state->tuner_i2c_adapter); kfree(state); } -static struct dvb_frontend_ops s5h1420_ops; +static u32 s5h1420_tuner_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int s5h1420_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct s5h1420_state *state = i2c_get_adapdata(i2c_adap); + struct i2c_msg m[1 + num]; + u8 tx_open[2] = { CON_1, state->CON_1_val | 1 }; /* repeater stops once there was a stop condition */ + + memset(m, 0, sizeof(struct i2c_msg) * (1 + num)); + + m[0].addr = state->config->demod_address; + m[0].buf = tx_open; + m[0].len = 2; -struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, - struct i2c_adapter* i2c) + memcpy(&m[1], msg, sizeof(struct i2c_msg) * num); + + return i2c_transfer(state->i2c, m, 1+num) == 1 + num ? num : -EIO; +} + +static struct i2c_algorithm s5h1420_tuner_i2c_algo = { + .master_xfer = s5h1420_tuner_i2c_tuner_xfer, + .functionality = s5h1420_tuner_i2c_func, +}; + +struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe) { - struct s5h1420_state* state = NULL; - u8 identity; + struct s5h1420_state *state = fe->demodulator_priv; + return &state->tuner_i2c_adapter; +} +EXPORT_SYMBOL(s5h1420_get_tuner_i2c_adapter); + +static struct dvb_frontend_ops s5h1420_ops; +struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, + struct i2c_adapter *i2c) +{ /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct s5h1420_state), GFP_KERNEL); + struct s5h1420_state *state = kzalloc(sizeof(struct s5h1420_state), GFP_KERNEL); + u8 i; + if (state == NULL) goto error; @@ -772,24 +901,42 @@ struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, state->symbol_rate = 0; /* check if the demod is there + identify it */ - identity = s5h1420_readreg(state, 0x00); - if (identity != 0x03) + i = s5h1420_readreg(state, ID01); + if (i != 0x03) goto error; + memset(state->shadow, 0xff, sizeof(state->shadow)); + + for (i = 0; i < 0x50; i++) + state->shadow[i] = s5h1420_readreg(state, i); + /* create dvb_frontend */ memcpy(&state->frontend.ops, &s5h1420_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; + + /* create tuner i2c adapter */ + strncpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", I2C_NAME_SIZE); + state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL, + state->tuner_i2c_adapter.algo = &s5h1420_tuner_i2c_algo; + state->tuner_i2c_adapter.algo_data = NULL; + i2c_set_adapdata(&state->tuner_i2c_adapter, state); + if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { + printk(KERN_ERR "S5H1420/PN1010: tuner i2c bus could not be initialized\n"); + goto error; + } + return &state->frontend; error: kfree(state); return NULL; } +EXPORT_SYMBOL(s5h1420_attach); static struct dvb_frontend_ops s5h1420_ops = { .info = { - .name = "Samsung S5H1420 DVB-S", + .name = "Samsung S5H1420/PnpNetwork PN1010 DVB-S", .type = FE_QPSK, .frequency_min = 950000, .frequency_max = 2150000, @@ -826,10 +973,6 @@ static struct dvb_frontend_ops s5h1420_ops = { .set_voltage = s5h1420_set_voltage, }; -module_param(debug, int, 0644); - -MODULE_DESCRIPTION("Samsung S5H1420 DVB-S Demodulator driver"); -MODULE_AUTHOR("Andrew de Quincey"); +MODULE_DESCRIPTION("Samsung S5H1420/PnpNetwork PN1010 DVB-S Demodulator driver"); +MODULE_AUTHOR("Andrew de Quincey, Patrick Boettcher"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(s5h1420_attach); diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h index 1555870f722..4c913f142bc 100644 --- a/drivers/media/dvb/frontends/s5h1420.h +++ b/drivers/media/dvb/frontends/s5h1420.h @@ -1,25 +1,26 @@ /* - Driver for S5H1420 QPSK Demodulators - - Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - + * Driver for + * Samsung S5H1420 and + * PnpNetwork PN1010 QPSK Demodulator + * + * Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> + * Copyright (C) 2005-8 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ #ifndef S5H1420_H #define S5H1420_H @@ -31,17 +32,26 @@ struct s5h1420_config u8 demod_address; /* does the inversion require inversion? */ - u8 invert:1; + u8 invert : 1; + + u8 repeated_start_workaround : 1; + u8 cdclk_polarity : 1; /* 1 == falling edge, 0 == raising edge */ }; #if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE)) -extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, - struct i2c_adapter* i2c); +extern struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, + struct i2c_adapter *i2c); +extern struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe); #else -static inline struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); return NULL; } #endif // CONFIG_DVB_S5H1420 diff --git a/drivers/media/dvb/frontends/s5h1420_priv.h b/drivers/media/dvb/frontends/s5h1420_priv.h new file mode 100644 index 00000000000..d9c58d28181 --- /dev/null +++ b/drivers/media/dvb/frontends/s5h1420_priv.h @@ -0,0 +1,102 @@ +/* + * Driver for + * Samsung S5H1420 and + * PnpNetwork PN1010 QPSK Demodulator + * + * Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> + * Copyright (C) 2005 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 675 Mass + * Ave, Cambridge, MA 02139, USA. + */ +#ifndef S5H1420_PRIV +#define S5H1420_PRIV + +#include <asm/types.h> + +enum s5h1420_register { + ID01 = 0x00, + CON_0 = 0x01, + CON_1 = 0x02, + PLL01 = 0x03, + PLL02 = 0x04, + QPSK01 = 0x05, + QPSK02 = 0x06, + Pre01 = 0x07, + Post01 = 0x08, + Loop01 = 0x09, + Loop02 = 0x0a, + Loop03 = 0x0b, + Loop04 = 0x0c, + Loop05 = 0x0d, + Pnco01 = 0x0e, + Pnco02 = 0x0f, + Pnco03 = 0x10, + Tnco01 = 0x11, + Tnco02 = 0x12, + Tnco03 = 0x13, + Monitor01 = 0x14, + Monitor02 = 0x15, + Monitor03 = 0x16, + Monitor04 = 0x17, + Monitor05 = 0x18, + Monitor06 = 0x19, + Monitor07 = 0x1a, + Monitor12 = 0x1f, + + FEC01 = 0x22, + Soft01 = 0x23, + Soft02 = 0x24, + Soft03 = 0x25, + Soft04 = 0x26, + Soft05 = 0x27, + Soft06 = 0x28, + Vit01 = 0x29, + Vit02 = 0x2a, + Vit03 = 0x2b, + Vit04 = 0x2c, + Vit05 = 0x2d, + Vit06 = 0x2e, + Vit07 = 0x2f, + Vit08 = 0x30, + Vit09 = 0x31, + Vit10 = 0x32, + Vit11 = 0x33, + Vit12 = 0x34, + Sync01 = 0x35, + Sync02 = 0x36, + Rs01 = 0x37, + Mpeg01 = 0x38, + Mpeg02 = 0x39, + DiS01 = 0x3a, + DiS02 = 0x3b, + DiS03 = 0x3c, + DiS04 = 0x3d, + DiS05 = 0x3e, + DiS06 = 0x3f, + DiS07 = 0x40, + DiS08 = 0x41, + DiS09 = 0x42, + DiS10 = 0x43, + DiS11 = 0x44, + Rf01 = 0x45, + Err01 = 0x46, + Err02 = 0x47, + Err03 = 0x48, + Err04 = 0x49, +}; + + +#endif diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c index da876f7bfe3..aa78aa14aad 100644 --- a/drivers/media/dvb/frontends/sp8870.c +++ b/drivers/media/dvb/frontends/sp8870.c @@ -70,7 +70,7 @@ static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data) int err; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data); + dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); return -EREMOTEIO; } @@ -88,7 +88,7 @@ static int sp8870_readreg (struct sp8870_state* state, u16 reg) ret = i2c_transfer (state->i2c, msg, 2); if (ret != 2) { - dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret); + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); return -1; } @@ -104,7 +104,7 @@ static int sp8870_firmware_upload (struct sp8870_state* state, const struct firm int tx_len; int err = 0; - dprintk ("%s: ...\n", __FUNCTION__); + dprintk ("%s: ...\n", __func__); if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET) return -EINVAL; @@ -131,14 +131,14 @@ static int sp8870_firmware_upload (struct sp8870_state* state, const struct firm msg.buf = tx_buf; msg.len = tx_len + 2; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk("%s: firmware upload failed!\n", __FUNCTION__); - printk ("%s: i2c error (err == %i)\n", __FUNCTION__, err); + printk("%s: firmware upload failed!\n", __func__); + printk ("%s: i2c error (err == %i)\n", __func__, err); return err; } fw_pos += tx_len; } - dprintk ("%s: done!\n", __FUNCTION__); + dprintk ("%s: done!\n", __func__); return 0; }; @@ -310,7 +310,7 @@ static int sp8870_init (struct dvb_frontend* fe) if (state->initialised) return 0; state->initialised = 1; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); /* request the firmware, this will block until someone uploads it */ @@ -449,15 +449,15 @@ static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks return 0; } -// number of trials to recover from lockup +/* number of trials to recover from lockup */ #define MAXTRIALS 5 -// maximum checks for data valid signal +/* maximum checks for data valid signal */ #define MAXCHECKS 100 -// only for debugging: counter for detected lockups -static int lockups = 0; -// only for debugging: counter for channel switches -static int switches = 0; +/* only for debugging: counter for detected lockups */ +static int lockups; +/* only for debugging: counter for channel switches */ +static int switches; static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { @@ -475,7 +475,7 @@ static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_par int trials = 0; int check_count = 0; - dprintk("%s: frequency = %i\n", __FUNCTION__, p->frequency); + dprintk("%s: frequency = %i\n", __func__, p->frequency); for (trials = 1; trials <= MAXTRIALS; trials++) { @@ -487,7 +487,7 @@ static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_par valid = sp8870_read_data_valid_signal(state); if (valid) { dprintk("%s: delay = %i usec\n", - __FUNCTION__, check_count * 10); + __func__, check_count * 10); break; } udelay(10); @@ -497,20 +497,20 @@ static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_par } if (!valid) { - printk("%s: firmware crash!!!!!!\n", __FUNCTION__); + printk("%s: firmware crash!!!!!!\n", __func__); return -EIO; } if (debug) { if (valid) { if (trials > 1) { - printk("%s: firmware lockup!!!\n", __FUNCTION__); - printk("%s: recovered after %i trial(s))\n", __FUNCTION__, trials - 1); + printk("%s: firmware lockup!!!\n", __func__); + printk("%s: recovered after %i trial(s))\n", __func__, trials - 1); lockups++; } } switches++; - printk("%s: switches = %i lockups = %i\n", __FUNCTION__, switches, lockups); + printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups); } return 0; diff --git a/drivers/media/dvb/frontends/sp8870.h b/drivers/media/dvb/frontends/sp8870.h index 909cefe7139..a764a793c7d 100644 --- a/drivers/media/dvb/frontends/sp8870.h +++ b/drivers/media/dvb/frontends/sp8870.h @@ -42,7 +42,7 @@ extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, static inline struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_SP8870 diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c index 1aa2539f509..49f55877f51 100644 --- a/drivers/media/dvb/frontends/sp887x.c +++ b/drivers/media/dvb/frontends/sp887x.c @@ -43,7 +43,7 @@ static int i2c_writebytes (struct sp887x_state* state, u8 *buf, u8 len) if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { printk ("%s: i2c write error (addr %02x, err == %i)\n", - __FUNCTION__, state->config->demod_address, err); + __func__, state->config->demod_address, err); return -EREMOTEIO; } @@ -65,7 +65,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data) { printk("%s: writereg error " "(reg %03x, data %03x, ret == %i)\n", - __FUNCTION__, reg & 0xffff, data & 0xffff, ret); + __func__, reg & 0xffff, data & 0xffff, ret); return ret; } } @@ -82,7 +82,7 @@ static int sp887x_readreg (struct sp887x_state* state, u16 reg) { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }}; if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { - printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret); + printk("%s: readreg error (ret == %i)\n", __func__, ret); return -1; } @@ -91,7 +91,7 @@ static int sp887x_readreg (struct sp887x_state* state, u16 reg) static void sp887x_microcontroller_stop (struct sp887x_state* state) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); sp887x_writereg(state, 0xf08, 0x000); sp887x_writereg(state, 0xf09, 0x000); @@ -101,7 +101,7 @@ static void sp887x_microcontroller_stop (struct sp887x_state* state) static void sp887x_microcontroller_start (struct sp887x_state* state) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); sp887x_writereg(state, 0xf08, 0x000); sp887x_writereg(state, 0xf09, 0x000); @@ -112,7 +112,7 @@ static void sp887x_microcontroller_start (struct sp887x_state* state) static void sp887x_setup_agc (struct sp887x_state* state) { /* setup AGC parameters */ - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); sp887x_writereg(state, 0x33c, 0x054); sp887x_writereg(state, 0x33b, 0x04c); sp887x_writereg(state, 0x328, 0x000); @@ -142,7 +142,7 @@ static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware int fw_size = fw->size; unsigned char *mem = fw->data; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* ignore the first 10 bytes, then we expect 0x4000 bytes of firmware */ if (fw_size < FW_SIZE+10) @@ -155,7 +155,7 @@ static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware sp887x_microcontroller_stop (state); - printk ("%s: firmware upload... ", __FUNCTION__); + printk ("%s: firmware upload... ", __func__); /* setup write pointer to -1 (end of memory) */ /* bit 0x8000 in address is set to enable 13bit mode */ @@ -181,7 +181,7 @@ static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware if ((err = i2c_writebytes (state, buf, c+2)) < 0) { printk ("failed.\n"); - printk ("%s: i2c error (err == %i)\n", __FUNCTION__, err); + printk ("%s: i2c error (err == %i)\n", __func__, err); return err; } } diff --git a/drivers/media/dvb/frontends/sp887x.h b/drivers/media/dvb/frontends/sp887x.h index 7ee78d7d916..04eff6e0eef 100644 --- a/drivers/media/dvb/frontends/sp887x.h +++ b/drivers/media/dvb/frontends/sp887x.h @@ -24,7 +24,7 @@ extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, static inline struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_SP887X diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c index 7c23775f77d..62caf802ed9 100644 --- a/drivers/media/dvb/frontends/stv0297.c +++ b/drivers/media/dvb/frontends/stv0297.c @@ -58,7 +58,7 @@ static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data) if (ret != 1) dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " - "ret == %i)\n", __FUNCTION__, reg, data, ret); + "ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } @@ -75,16 +75,16 @@ static int stv0297_readreg(struct stv0297_state *state, u8 reg) // this device needs a STOP between the register and data if (state->config->stop_during_read) { if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret); return -1; } if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret); return -1; } } else { if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg, ret); return -1; } } @@ -115,16 +115,16 @@ static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len // this device needs a STOP between the register and data if (state->config->stop_during_read) { if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret); return -1; } if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret); return -1; } } else { if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __func__, reg1, ret); return -1; } } diff --git a/drivers/media/dvb/frontends/stv0297.h b/drivers/media/dvb/frontends/stv0297.h index 69f4515df2b..3f8f9468f38 100644 --- a/drivers/media/dvb/frontends/stv0297.h +++ b/drivers/media/dvb/frontends/stv0297.h @@ -49,7 +49,7 @@ extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config, static inline struct dvb_frontend* stv0297_attach(const struct stv0297_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_STV0297 diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 035dd7ba651..35435bef8e7 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -63,6 +63,7 @@ struct stv0299_state { u32 symbol_rate; fe_code_rate_t fec_inner; int errmode; + u32 ucblocks; }; #define STATUS_BER 0 @@ -86,7 +87,7 @@ static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data) if (ret != 1) dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " - "ret == %i)\n", __FUNCTION__, reg, data, ret); + "ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -EREMOTEIO : 0; } @@ -113,7 +114,7 @@ static u8 stv0299_readreg (struct stv0299_state* state, u8 reg) if (ret != 2) dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", - __FUNCTION__, reg, ret); + __func__, reg, ret); return b1[0]; } @@ -127,14 +128,14 @@ static int stv0299_readregs (struct stv0299_state* state, u8 reg1, u8 *b, u8 len ret = i2c_transfer (state->i2c, msg, 2); if (ret != 2) - dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret); + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); return ret == 2 ? 0 : ret; } static int stv0299_set_FEC (struct stv0299_state* state, fe_code_rate_t fec) { - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); switch (fec) { case FEC_AUTO: @@ -174,7 +175,7 @@ static fe_code_rate_t stv0299_get_fec (struct stv0299_state* state) FEC_7_8, FEC_1_2 }; u8 index; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); index = stv0299_readreg (state, 0x1b); index &= 0x7; @@ -189,11 +190,11 @@ static int stv0299_wait_diseqc_fifo (struct stv0299_state* state, int timeout) { unsigned long start = jiffies; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); while (stv0299_readreg(state, 0x0a) & 1) { if (jiffies - start > timeout) { - dprintk ("%s: timeout!!\n", __FUNCTION__); + dprintk ("%s: timeout!!\n", __func__); return -ETIMEDOUT; } msleep(10); @@ -206,11 +207,11 @@ static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout) { unsigned long start = jiffies; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); while ((stv0299_readreg(state, 0x0a) & 3) != 2 ) { if (jiffies - start > timeout) { - dprintk ("%s: timeout!!\n", __FUNCTION__); + dprintk ("%s: timeout!!\n", __func__); return -ETIMEDOUT; } msleep(10); @@ -245,7 +246,7 @@ static int stv0299_get_symbolrate (struct stv0299_state* state) u8 sfr[3]; s8 rtf; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); stv0299_readregs (state, 0x1f, sfr, 3); stv0299_readregs (state, 0x1a, (u8 *)&rtf, 1); @@ -257,8 +258,8 @@ static int stv0299_get_symbolrate (struct stv0299_state* state) offset = (s32) rtf * (srate / 4096L); offset /= 128; - dprintk ("%s : srate = %i\n", __FUNCTION__, srate); - dprintk ("%s : ofset = %i\n", __FUNCTION__, offset); + dprintk ("%s : srate = %i\n", __func__, srate); + dprintk ("%s : ofset = %i\n", __func__, offset); srate += offset; @@ -276,7 +277,7 @@ static int stv0299_send_diseqc_msg (struct dvb_frontend* fe, u8 val; int i; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (stv0299_wait_diseqc_idle (state, 100) < 0) return -ETIMEDOUT; @@ -305,7 +306,7 @@ static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t struct stv0299_state* state = fe->demodulator_priv; u8 val; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (stv0299_wait_diseqc_idle (state, 100) < 0) return -ETIMEDOUT; @@ -355,7 +356,7 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag u8 reg0x08; u8 reg0x0c; - dprintk("%s: %s\n", __FUNCTION__, + dprintk("%s: %s\n", __func__, voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); @@ -366,26 +367,32 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag * H/V switching over OP0, OP1 and OP2 are LNB power enable bits */ reg0x0c &= 0x0f; - - if (voltage == SEC_VOLTAGE_OFF) { - stv0299_writeregI (state, 0x0c, 0x00); /* LNB power off! */ - return stv0299_writeregI (state, 0x08, 0x00); /* LNB power off! */ - } - - stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6)); + reg0x08 = (reg0x08 & 0x3f) | (state->config->lock_output << 6); switch (voltage) { case SEC_VOLTAGE_13: - if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) reg0x0c |= 0x10; - else reg0x0c |= 0x40; - - return stv0299_writeregI(state, 0x0c, reg0x0c); - + if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) + reg0x0c |= 0x10; /* OP1 off, OP0 on */ + else + reg0x0c |= 0x40; /* OP1 on, OP0 off */ + break; case SEC_VOLTAGE_18: - return stv0299_writeregI(state, 0x0c, reg0x0c | 0x50); + reg0x0c |= 0x50; /* OP1 on, OP0 on */ + break; + case SEC_VOLTAGE_OFF: + /* LNB power off! */ + reg0x08 = 0x00; + reg0x0c = 0x00; + break; default: return -EINVAL; }; + + if (state->config->op0_off) + reg0x0c &= ~0x10; + + stv0299_writeregI(state, 0x08, reg0x08); + return stv0299_writeregI(state, 0x0c, reg0x0c); } static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long cmd) @@ -408,7 +415,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long cmd = cmd << 1; if (debug_legacy_dish_switch) - printk ("%s switch command: 0x%04lx\n",__FUNCTION__, cmd); + printk ("%s switch command: 0x%04lx\n",__func__, cmd); do_gettimeofday (&nexttime); if (debug_legacy_dish_switch) @@ -433,7 +440,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long } if (debug_legacy_dish_switch) { printk ("%s(%d): switch delay (should be 32k followed by all 8k\n", - __FUNCTION__, fe->dvb->num); + __func__, fe->dvb->num); for (i = 1; i < 10; i++) printk ("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); } @@ -445,11 +452,20 @@ static int stv0299_init (struct dvb_frontend* fe) { struct stv0299_state* state = fe->demodulator_priv; int i; + u8 reg; + u8 val; dprintk("stv0299: init chip\n"); - for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2) - stv0299_writeregI(state, state->config->inittab[i], state->config->inittab[i+1]); + for (i = 0; ; i += 2) { + reg = state->config->inittab[i]; + val = state->config->inittab[i+1]; + if (reg == 0xff && val == 0xff) + break; + if (reg == 0x0c && state->config->op0_off) + val &= ~0x10; + stv0299_writeregI(state, reg, val); + } return 0; } @@ -461,7 +477,7 @@ static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status) u8 signal = 0xff - stv0299_readreg (state, 0x18); u8 sync = stv0299_readreg (state, 0x1b); - dprintk ("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __FUNCTION__, sync); + dprintk ("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, sync); *status = 0; if (signal > 10) @@ -486,8 +502,10 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) { struct stv0299_state* state = fe->demodulator_priv; - if (state->errmode != STATUS_BER) return 0; - *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); + if (state->errmode != STATUS_BER) + return -ENOSYS; + + *ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8); return 0; } @@ -499,7 +517,7 @@ static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength) s32 signal = 0xffff - ((stv0299_readreg (state, 0x18) << 8) | stv0299_readreg (state, 0x19)); - dprintk ("%s : FE_READ_SIGNAL_STRENGTH : AGC2I: 0x%02x%02x, signal=0x%04x\n", __FUNCTION__, + dprintk ("%s : FE_READ_SIGNAL_STRENGTH : AGC2I: 0x%02x%02x, signal=0x%04x\n", __func__, stv0299_readreg (state, 0x18), stv0299_readreg (state, 0x19), (int) signal); @@ -525,8 +543,12 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { struct stv0299_state* state = fe->demodulator_priv; - if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0; - else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); + if (state->errmode != STATUS_UCBLOCKS) + return -ENOSYS; + + state->ucblocks += stv0299_readreg(state, 0x1e); + state->ucblocks += (stv0299_readreg(state, 0x1d) << 8); + *ucblocks = state->ucblocks; return 0; } @@ -536,7 +558,7 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par struct stv0299_state* state = fe->demodulator_priv; int invval = 0; - dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__); + dprintk ("%s : FE_SET_FRONTEND\n", __func__); // set the inversion if (p->inversion == INVERSION_OFF) invval = 0; diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h index 33df9495908..3282f43022f 100644 --- a/drivers/media/dvb/frontends/stv0299.h +++ b/drivers/media/dvb/frontends/stv0299.h @@ -48,10 +48,10 @@ #include <linux/dvb/frontend.h> #include "dvb_frontend.h" -#define STV0229_LOCKOUTPUT_0 0 -#define STV0229_LOCKOUTPUT_1 1 -#define STV0229_LOCKOUTPUT_CF 2 -#define STV0229_LOCKOUTPUT_LK 3 +#define STV0299_LOCKOUTPUT_0 0 +#define STV0299_LOCKOUTPUT_1 1 +#define STV0299_LOCKOUTPUT_CF 2 +#define STV0299_LOCKOUTPUT_LK 3 #define STV0299_VOLT13_OP0 0 #define STV0299_VOLT13_OP1 1 @@ -82,6 +82,9 @@ struct stv0299_config /* Is 13v controlled by OP0 or OP1? */ u8 volt13_op0_op1:1; + /* Turn-off OP0? */ + u8 op0_off:1; + /* minimum delay before retuning */ int min_delay_ms; @@ -96,7 +99,7 @@ extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, static inline struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_STV0299 diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index 45137d2ebfb..f648fdb64bb 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -79,7 +79,7 @@ static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data) if (ret != 1) printk("DVB: TDA10021(%d): %s, writereg error " "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", - state->frontend.dvb->num, __FUNCTION__, reg, data, ret); + state->frontend.dvb->num, __func__, reg, data, ret); msleep(10); return (ret != 1) ? -EREMOTEIO : 0; @@ -97,7 +97,7 @@ static u8 tda10021_readreg (struct tda10021_state* state, u8 reg) // Don't print an error message if the id is read. if (ret != 2 && reg != 0x1a) printk("DVB: TDA10021: %s: readreg error (ret == %i)\n", - __FUNCTION__, ret); + __func__, ret); return b1[0]; } diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb/frontends/tda10023.c index 364bc01971a..c6ff5b82ff8 100644 --- a/drivers/media/dvb/frontends/tda10023.c +++ b/drivers/media/dvb/frontends/tda10023.c @@ -116,9 +116,12 @@ static u8 tda10023_readreg (struct tda10023_state* state, u8 reg) int ret; ret = i2c_transfer (state->i2c, msg, 2); - if (ret != 2) - printk("DVB: TDA10023: %s: readreg error (ret == %i)\n", - __FUNCTION__, ret); + if (ret != 2) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error " + "(reg == 0x%02x, ret == %i)\n", + num, __func__, reg, ret); + } return b1[0]; } @@ -129,11 +132,12 @@ static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data) int ret; ret = i2c_transfer (state->i2c, &msg, 1); - if (ret != 1) - printk("DVB: TDA10023(%d): %s, writereg error " + if (ret != 1) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error " "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", - state->frontend.dvb->num, __FUNCTION__, reg, data, ret); - + num, __func__, reg, data, ret); + } return (ret != 1) ? -EREMOTEIO : 0; } @@ -464,7 +468,7 @@ struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, int i; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/tda1002x.h b/drivers/media/dvb/frontends/tda1002x.h index e9094d8123f..1bcc0d44b90 100644 --- a/drivers/media/dvb/frontends/tda1002x.h +++ b/drivers/media/dvb/frontends/tda1002x.h @@ -40,7 +40,7 @@ extern struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config static inline struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, struct i2c_adapter* i2c, u8 pwm) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_TDA10021 @@ -52,7 +52,7 @@ extern struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config static inline struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, struct i2c_adapter* i2c, u8 pwm) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_TDA10023 diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c new file mode 100644 index 00000000000..090fb7dd93c --- /dev/null +++ b/drivers/media/dvb/frontends/tda10048.c @@ -0,0 +1,841 @@ +/* + NXP TDA10048HN DVB OFDM demodulator driver + + Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "tda10048.h" + +#define TDA10048_DEFAULT_FIRMWARE "dvb-fe-tda10048-1.0.fw" +#define TDA10048_DEFAULT_FIRMWARE_SIZE 24878 + +/* Register name definitions */ +#define TDA10048_IDENTITY 0x00 +#define TDA10048_VERSION 0x01 +#define TDA10048_DSP_CODE_CPT 0x0C +#define TDA10048_DSP_CODE_IN 0x0E +#define TDA10048_IN_CONF1 0x10 +#define TDA10048_IN_CONF2 0x11 +#define TDA10048_IN_CONF3 0x12 +#define TDA10048_OUT_CONF1 0x14 +#define TDA10048_OUT_CONF2 0x15 +#define TDA10048_OUT_CONF3 0x16 +#define TDA10048_AUTO 0x18 +#define TDA10048_SYNC_STATUS 0x1A +#define TDA10048_CONF_C4_1 0x1E +#define TDA10048_CONF_C4_2 0x1F +#define TDA10048_CODE_IN_RAM 0x20 +#define TDA10048_CHANNEL_INFO_1_R 0x22 +#define TDA10048_CHANNEL_INFO_2_R 0x23 +#define TDA10048_CHANNEL_INFO1 0x24 +#define TDA10048_CHANNEL_INFO2 0x25 +#define TDA10048_TIME_ERROR_R 0x26 +#define TDA10048_TIME_ERROR 0x27 +#define TDA10048_FREQ_ERROR_LSB_R 0x28 +#define TDA10048_FREQ_ERROR_MSB_R 0x29 +#define TDA10048_FREQ_ERROR_LSB 0x2A +#define TDA10048_FREQ_ERROR_MSB 0x2B +#define TDA10048_IT_SEL 0x30 +#define TDA10048_IT_STAT 0x32 +#define TDA10048_DSP_AD_LSB 0x3C +#define TDA10048_DSP_AD_MSB 0x3D +#define TDA10048_DSP_REF_LSB 0x3E +#define TDA10048_DSP_REF_MSB 0x3F +#define TDA10048_CONF_TRISTATE1 0x44 +#define TDA10048_CONF_TRISTATE2 0x45 +#define TDA10048_CONF_POLARITY 0x46 +#define TDA10048_GPIO_SP_DS0 0x48 +#define TDA10048_GPIO_SP_DS1 0x49 +#define TDA10048_GPIO_SP_DS2 0x4A +#define TDA10048_GPIO_SP_DS3 0x4B +#define TDA10048_GPIO_OUT_SEL 0x4C +#define TDA10048_GPIO_SELECT 0x4D +#define TDA10048_IC_MODE 0x4E +#define TDA10048_CONF_XO 0x50 +#define TDA10048_CONF_PLL1 0x51 +#define TDA10048_CONF_PLL2 0x52 +#define TDA10048_CONF_PLL3 0x53 +#define TDA10048_CONF_ADC 0x54 +#define TDA10048_CONF_ADC_2 0x55 +#define TDA10048_CONF_C1_1 0x60 +#define TDA10048_CONF_C1_3 0x62 +#define TDA10048_AGC_CONF 0x70 +#define TDA10048_AGC_THRESHOLD_LSB 0x72 +#define TDA10048_AGC_THRESHOLD_MSB 0x73 +#define TDA10048_AGC_RENORM 0x74 +#define TDA10048_AGC_GAINS 0x76 +#define TDA10048_AGC_TUN_MIN 0x78 +#define TDA10048_AGC_TUN_MAX 0x79 +#define TDA10048_AGC_IF_MIN 0x7A +#define TDA10048_AGC_IF_MAX 0x7B +#define TDA10048_AGC_TUN_LEVEL 0x7E +#define TDA10048_AGC_IF_LEVEL 0x7F +#define TDA10048_DIG_AGC_LEVEL 0x81 +#define TDA10048_FREQ_PHY2_LSB 0x86 +#define TDA10048_FREQ_PHY2_MSB 0x87 +#define TDA10048_TIME_INVWREF_LSB 0x88 +#define TDA10048_TIME_INVWREF_MSB 0x89 +#define TDA10048_TIME_WREF_LSB 0x8A +#define TDA10048_TIME_WREF_MID1 0x8B +#define TDA10048_TIME_WREF_MID2 0x8C +#define TDA10048_TIME_WREF_MSB 0x8D +#define TDA10048_NP_OUT 0xA2 +#define TDA10048_CELL_ID_LSB 0xA4 +#define TDA10048_CELL_ID_MSB 0xA5 +#define TDA10048_EXTTPS_ODD 0xAA +#define TDA10048_EXTTPS_EVEN 0xAB +#define TDA10048_TPS_LENGTH 0xAC +#define TDA10048_FREE_REG_1 0xB2 +#define TDA10048_FREE_REG_2 0xB3 +#define TDA10048_CONF_C3_1 0xC0 +#define TDA10048_CYBER_CTRL 0xC2 +#define TDA10048_CBER_NMAX_LSB 0xC4 +#define TDA10048_CBER_NMAX_MSB 0xC5 +#define TDA10048_CBER_LSB 0xC6 +#define TDA10048_CBER_MSB 0xC7 +#define TDA10048_VBER_LSB 0xC8 +#define TDA10048_VBER_MID 0xC9 +#define TDA10048_VBER_MSB 0xCA +#define TDA10048_CYBER_LUT 0xCC +#define TDA10048_UNCOR_CTRL 0xCD +#define TDA10048_UNCOR_CPT_LSB 0xCE +#define TDA10048_UNCOR_CPT_MSB 0xCF +#define TDA10048_SOFT_IT_C3 0xD6 +#define TDA10048_CONF_TS2 0xE0 +#define TDA10048_CONF_TS1 0xE1 + +static unsigned int debug; + +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "tda10048: " fmt, ## arg);\ + } while (0) + +struct tda10048_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct tda10048_config *config; + struct dvb_frontend frontend; + + int fwloaded; +}; + +static struct init_tab { + u8 reg; + u16 data; +} init_tab[] = { + { TDA10048_CONF_PLL1, 0x08 }, + { TDA10048_CONF_ADC_2, 0x00 }, + { TDA10048_CONF_C4_1, 0x00 }, + { TDA10048_CONF_PLL1, 0x0f }, + { TDA10048_CONF_PLL2, 0x0a }, + { TDA10048_CONF_PLL3, 0x43 }, + { TDA10048_FREQ_PHY2_LSB, 0x02 }, + { TDA10048_FREQ_PHY2_MSB, 0x0a }, + { TDA10048_TIME_WREF_LSB, 0xbd }, + { TDA10048_TIME_WREF_MID1, 0xe4 }, + { TDA10048_TIME_WREF_MID2, 0xa8 }, + { TDA10048_TIME_WREF_MSB, 0x02 }, + { TDA10048_TIME_INVWREF_LSB, 0x04 }, + { TDA10048_TIME_INVWREF_MSB, 0x06 }, + { TDA10048_CONF_C4_1, 0x00 }, + { TDA10048_CONF_C1_1, 0xa8 }, + { TDA10048_AGC_CONF, 0x16 }, + { TDA10048_CONF_C1_3, 0x0b }, + { TDA10048_AGC_TUN_MIN, 0x00 }, + { TDA10048_AGC_TUN_MAX, 0xff }, + { TDA10048_AGC_IF_MIN, 0x00 }, + { TDA10048_AGC_IF_MAX, 0xff }, + { TDA10048_AGC_THRESHOLD_MSB, 0x00 }, + { TDA10048_AGC_THRESHOLD_LSB, 0x70 }, + { TDA10048_CYBER_CTRL, 0x38 }, + { TDA10048_AGC_GAINS, 0x12 }, + { TDA10048_CONF_XO, 0x00 }, + { TDA10048_CONF_TS1, 0x07 }, + { TDA10048_IC_MODE, 0x00 }, + { TDA10048_CONF_TS2, 0xc0 }, + { TDA10048_CONF_TRISTATE1, 0x21 }, + { TDA10048_CONF_TRISTATE2, 0x00 }, + { TDA10048_CONF_POLARITY, 0x00 }, + { TDA10048_CONF_C4_2, 0x04 }, + { TDA10048_CONF_ADC, 0x60 }, + { TDA10048_CONF_ADC_2, 0x10 }, + { TDA10048_CONF_ADC, 0x60 }, + { TDA10048_CONF_ADC_2, 0x00 }, + { TDA10048_CONF_C1_1, 0xa8 }, + { TDA10048_UNCOR_CTRL, 0x00 }, + { TDA10048_CONF_C4_2, 0x04 }, +}; + +static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf [] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 2 }; + + dprintk(2, "%s(reg = 0x%02x, data = 0x%02x)\n", __func__, reg, data); + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk("%s: writereg error (ret == %i)\n", __func__, ret); + + return (ret != 1) ? -1 : 0; +} + +static u8 tda10048_readreg(struct tda10048_state *state, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { + { .addr = state->config->demod_address, + .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, + .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + dprintk(2, "%s(reg = 0x%02x)\n", __func__, reg); + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + + return b1[0]; +} + +static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg, + u8 *data, u16 len) +{ + int ret = -EREMOTEIO; + struct i2c_msg msg; + u8 *buf; + + dprintk(2, "%s(%d, ?, len = %d)\n", __func__, reg, len); + + buf = kmalloc(len + 1, GFP_KERNEL); + if (buf == NULL) { + ret = -ENOMEM; + goto error; + } + + *buf = reg; + memcpy(buf + 1, data, len); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = buf; + msg.len = len + 1; + + dprintk(2, "%s(): write len = %d\n", + __func__, msg.len); + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) { + printk(KERN_ERR "%s(): writereg error err %i\n", + __func__, ret); + ret = -EREMOTEIO; + } + +error: + kfree(buf); + + return ret; +} + +static int tda10048_firmware_upload(struct dvb_frontend *fe) +{ + struct tda10048_state *state = fe->demodulator_priv; + const struct firmware *fw; + int ret; + int pos = 0; + int cnt; + u8 wlen = state->config->fwbulkwritelen; + + if ((wlen != TDA10048_BULKWRITE_200) && (wlen != TDA10048_BULKWRITE_50)) + wlen = TDA10048_BULKWRITE_200; + + /* request the firmware, this will block and timeout */ + printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n", + __func__, + TDA10048_DEFAULT_FIRMWARE); + + ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE, + &state->i2c->dev); + if (ret) { + printk(KERN_ERR "%s: Upload failed. (file not found?)\n", + __func__); + return -EIO; + } else { + printk(KERN_INFO "%s: firmware read %Zu bytes.\n", + __func__, + fw->size); + ret = 0; + } + + if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) { + printk(KERN_ERR "%s: firmware incorrect size\n", __func__); + return -EIO; + } else { + printk(KERN_INFO "%s: firmware uploading\n", __func__); + + /* Soft reset */ + tda10048_writereg(state, TDA10048_CONF_TRISTATE1, + tda10048_readreg(state, TDA10048_CONF_TRISTATE1) + & 0xfe); + tda10048_writereg(state, TDA10048_CONF_TRISTATE1, + tda10048_readreg(state, TDA10048_CONF_TRISTATE1) + | 0x01); + + /* Put the demod into host download mode */ + tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xf9); + + /* Boot the DSP */ + tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x08); + + /* Prepare for download */ + tda10048_writereg(state, TDA10048_DSP_CODE_CPT, 0); + + /* Download the firmware payload */ + while (pos < fw->size) { + + if ((fw->size - pos) > wlen) + cnt = wlen; + else + cnt = fw->size - pos; + + tda10048_writeregbulk(state, TDA10048_DSP_CODE_IN, + &fw->data[pos], cnt); + + pos += cnt; + } + + ret = -EIO; + /* Wait up to 250ms for the DSP to boot */ + for (cnt = 0; cnt < 250 ; cnt += 10) { + + msleep(10); + + if (tda10048_readreg(state, TDA10048_SYNC_STATUS) + & 0x40) { + ret = 0; + break; + } + } + } + + release_firmware(fw); + + if (ret == 0) { + printk(KERN_INFO "%s: firmware uploaded\n", __func__); + state->fwloaded = 1; + } else + printk(KERN_ERR "%s: firmware upload failed\n", __func__); + + return ret; +} + +static int tda10048_set_inversion(struct dvb_frontend *fe, int inversion) +{ + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s(%d)\n", __func__, inversion); + + if (inversion == TDA10048_INVERSION_ON) + tda10048_writereg(state, TDA10048_CONF_C1_1, + tda10048_readreg(state, TDA10048_CONF_C1_1) | 0x20); + else + tda10048_writereg(state, TDA10048_CONF_C1_1, + tda10048_readreg(state, TDA10048_CONF_C1_1) & 0xdf); + + return 0; +} + +/* Retrieve the demod settings */ +static int tda10048_get_tps(struct tda10048_state *state, + struct dvb_ofdm_parameters *p) +{ + u8 val; + + /* Make sure the TPS regs are valid */ + if (!(tda10048_readreg(state, TDA10048_AUTO) & 0x01)) + return -EAGAIN; + + val = tda10048_readreg(state, TDA10048_OUT_CONF2); + switch ((val & 0x60) >> 5) { + case 0: p->constellation = QPSK; break; + case 1: p->constellation = QAM_16; break; + case 2: p->constellation = QAM_64; break; + } + switch ((val & 0x18) >> 3) { + case 0: p->hierarchy_information = HIERARCHY_NONE; break; + case 1: p->hierarchy_information = HIERARCHY_1; break; + case 2: p->hierarchy_information = HIERARCHY_2; break; + case 3: p->hierarchy_information = HIERARCHY_4; break; + } + switch (val & 0x07) { + case 0: p->code_rate_HP = FEC_1_2; break; + case 1: p->code_rate_HP = FEC_2_3; break; + case 2: p->code_rate_HP = FEC_3_4; break; + case 3: p->code_rate_HP = FEC_5_6; break; + case 4: p->code_rate_HP = FEC_7_8; break; + } + + val = tda10048_readreg(state, TDA10048_OUT_CONF3); + switch (val & 0x07) { + case 0: p->code_rate_LP = FEC_1_2; break; + case 1: p->code_rate_LP = FEC_2_3; break; + case 2: p->code_rate_LP = FEC_3_4; break; + case 3: p->code_rate_LP = FEC_5_6; break; + case 4: p->code_rate_LP = FEC_7_8; break; + } + + val = tda10048_readreg(state, TDA10048_OUT_CONF1); + switch ((val & 0x0c) >> 2) { + case 0: p->guard_interval = GUARD_INTERVAL_1_32; break; + case 1: p->guard_interval = GUARD_INTERVAL_1_16; break; + case 2: p->guard_interval = GUARD_INTERVAL_1_8; break; + case 3: p->guard_interval = GUARD_INTERVAL_1_4; break; + } + switch (val & 0x02) { + case 0: p->transmission_mode = TRANSMISSION_MODE_2K; break; + case 1: p->transmission_mode = TRANSMISSION_MODE_8K; break; + } + + return 0; +} + +static int tda10048_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct tda10048_state *state = fe->demodulator_priv; + dprintk(1, "%s(%d)\n", __func__, enable); + + if (enable) + return tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x02); + else + return tda10048_writereg(state, TDA10048_CONF_C4_1, + tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xfd); +} + +static int tda10048_output_mode(struct dvb_frontend *fe, int serial) +{ + struct tda10048_state *state = fe->demodulator_priv; + dprintk(1, "%s(%d)\n", __func__, serial); + + /* Ensure pins are out of tri-state */ + tda10048_writereg(state, TDA10048_CONF_TRISTATE1, 0x21); + tda10048_writereg(state, TDA10048_CONF_TRISTATE2, 0x00); + + if (serial) { + tda10048_writereg(state, TDA10048_IC_MODE, 0x80 | 0x20); + tda10048_writereg(state, TDA10048_CONF_TS2, 0xc0); + } else { + tda10048_writereg(state, TDA10048_IC_MODE, 0x00); + tda10048_writereg(state, TDA10048_CONF_TS2, 0x01); + } + + return 0; +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +/* TODO: Support manual tuning with specific params */ +static int tda10048_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s(frequency=%d)\n", __func__, p->frequency); + + if (fe->ops.tuner_ops.set_params) { + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + fe->ops.tuner_ops.set_params(fe, p); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* Enable demod TPS auto detection and begin acquisition */ + tda10048_writereg(state, TDA10048_AUTO, 0x57); + + return 0; +} + +/* Establish sane defaults and load firmware. */ +static int tda10048_init(struct dvb_frontend *fe) +{ + struct tda10048_state *state = fe->demodulator_priv; + int ret = 0, i; + + dprintk(1, "%s()\n", __func__); + + /* Apply register defaults */ + for (i = 0; i < ARRAY_SIZE(init_tab); i++) + tda10048_writereg(state, init_tab[i].reg, init_tab[i].data); + + if (state->fwloaded == 0) + ret = tda10048_firmware_upload(fe); + + /* Set either serial or parallel */ + tda10048_output_mode(fe, state->config->output_mode); + + /* set inversion */ + tda10048_set_inversion(fe, state->config->inversion); + + /* Ensure we leave the gate closed */ + tda10048_i2c_gate_ctrl(fe, 0); + + return ret; +} + +static int tda10048_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct tda10048_state *state = fe->demodulator_priv; + u8 reg; + + *status = 0; + + reg = tda10048_readreg(state, TDA10048_SYNC_STATUS); + + dprintk(1, "%s() status =0x%02x\n", __func__, reg); + + if (reg & 0x02) + *status |= FE_HAS_CARRIER; + + if (reg & 0x04) + *status |= FE_HAS_SIGNAL; + + if (reg & 0x08) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + } + + return 0; +} + +static int tda10048_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s()\n", __func__); + + /* TODO: A reset may be required here */ + *ber = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 | + tda10048_readreg(state, TDA10048_CBER_LSB); + + return 0; +} + +static int tda10048_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + struct tda10048_state *state = fe->demodulator_priv; + u8 v; + + dprintk(1, "%s()\n", __func__); + + *signal_strength = 65535; + + v = tda10048_readreg(state, TDA10048_NP_OUT); + if (v > 0) + *signal_strength -= (v << 8) | v; + + return 0; +} + +/* SNR lookup table */ +static struct snr_tab { + u8 val; + u8 data; +} snr_tab[] = { + { 0, 0 }, + { 1, 246 }, + { 2, 215 }, + { 3, 198 }, + { 4, 185 }, + { 5, 176 }, + { 6, 168 }, + { 7, 161 }, + { 8, 155 }, + { 9, 150 }, + { 10, 146 }, + { 11, 141 }, + { 12, 138 }, + { 13, 134 }, + { 14, 131 }, + { 15, 128 }, + { 16, 125 }, + { 17, 122 }, + { 18, 120 }, + { 19, 118 }, + { 20, 115 }, + { 21, 113 }, + { 22, 111 }, + { 23, 109 }, + { 24, 107 }, + { 25, 106 }, + { 26, 104 }, + { 27, 102 }, + { 28, 101 }, + { 29, 99 }, + { 30, 98 }, + { 31, 96 }, + { 32, 95 }, + { 33, 94 }, + { 34, 92 }, + { 35, 91 }, + { 36, 90 }, + { 37, 89 }, + { 38, 88 }, + { 39, 86 }, + { 40, 85 }, + { 41, 84 }, + { 42, 83 }, + { 43, 82 }, + { 44, 81 }, + { 45, 80 }, + { 46, 79 }, + { 47, 78 }, + { 48, 77 }, + { 49, 76 }, + { 50, 76 }, + { 51, 75 }, + { 52, 74 }, + { 53, 73 }, + { 54, 72 }, + { 56, 71 }, + { 57, 70 }, + { 58, 69 }, + { 60, 68 }, + { 61, 67 }, + { 63, 66 }, + { 64, 65 }, + { 66, 64 }, + { 67, 63 }, + { 68, 62 }, + { 69, 62 }, + { 70, 61 }, + { 72, 60 }, + { 74, 59 }, + { 75, 58 }, + { 77, 57 }, + { 79, 56 }, + { 81, 55 }, + { 83, 54 }, + { 85, 53 }, + { 87, 52 }, + { 89, 51 }, + { 91, 50 }, + { 93, 49 }, + { 95, 48 }, + { 97, 47 }, + { 100, 46 }, + { 102, 45 }, + { 104, 44 }, + { 107, 43 }, + { 109, 42 }, + { 112, 41 }, + { 114, 40 }, + { 117, 39 }, + { 120, 38 }, + { 123, 37 }, + { 125, 36 }, + { 128, 35 }, + { 131, 34 }, + { 134, 33 }, + { 138, 32 }, + { 141, 31 }, + { 144, 30 }, + { 147, 29 }, + { 151, 28 }, + { 154, 27 }, + { 158, 26 }, + { 162, 25 }, + { 165, 24 }, + { 169, 23 }, + { 173, 22 }, + { 177, 21 }, + { 181, 20 }, + { 186, 19 }, + { 190, 18 }, + { 194, 17 }, + { 199, 16 }, + { 204, 15 }, + { 208, 14 }, + { 213, 13 }, + { 218, 12 }, + { 223, 11 }, + { 229, 10 }, + { 234, 9 }, + { 239, 8 }, + { 245, 7 }, + { 251, 6 }, + { 255, 5 }, +}; + +static int tda10048_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct tda10048_state *state = fe->demodulator_priv; + u8 v; + int i, ret = -EINVAL; + + dprintk(1, "%s()\n", __func__); + + v = tda10048_readreg(state, TDA10048_NP_OUT); + for (i = 0; i < ARRAY_SIZE(snr_tab); i++) { + if (v <= snr_tab[i].val) { + *snr = snr_tab[i].data; + ret = 0; + break; + } + } + + return ret; +} + +static int tda10048_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s()\n", __func__); + + *ucblocks = tda10048_readreg(state, TDA10048_UNCOR_CPT_MSB) << 8 | + tda10048_readreg(state, TDA10048_UNCOR_CPT_LSB); + + return 0; +} + +static int tda10048_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct tda10048_state *state = fe->demodulator_priv; + + dprintk(1, "%s()\n", __func__); + + p->inversion = tda10048_readreg(state, TDA10048_CONF_C1_1) + & 0x20 ? INVERSION_ON : INVERSION_OFF; + + return tda10048_get_tps(state, &p->u.ofdm); +} + +static int tda10048_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void tda10048_release(struct dvb_frontend *fe) +{ + struct tda10048_state *state = fe->demodulator_priv; + dprintk(1, "%s()\n", __func__); + kfree(state); +} + +static struct dvb_frontend_ops tda10048_ops; + +struct dvb_frontend *tda10048_attach(const struct tda10048_config *config, + struct i2c_adapter *i2c) +{ + struct tda10048_state *state = NULL; + + dprintk(1, "%s()\n", __func__); + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->fwloaded = 0; + + /* check if the demod is present */ + if (tda10048_readreg(state, TDA10048_IDENTITY) != 0x048) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10048_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + /* Leave the gate closed */ + tda10048_i2c_gate_ctrl(&state->frontend, 0); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(tda10048_attach); + +static struct dvb_frontend_ops tda10048_ops = { + + .info = { + .name = "NXP TDA10048HN DVB-T", + .type = FE_OFDM, + .frequency_min = 177000000, + .frequency_max = 858000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER + }, + + .release = tda10048_release, + .init = tda10048_init, + .i2c_gate_ctrl = tda10048_i2c_gate_ctrl, + .set_frontend = tda10048_set_frontend, + .get_frontend = tda10048_get_frontend, + .get_tune_settings = tda10048_get_tune_settings, + .read_status = tda10048_read_status, + .read_ber = tda10048_read_ber, + .read_signal_strength = tda10048_read_signal_strength, + .read_snr = tda10048_read_snr, + .read_ucblocks = tda10048_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("NXP TDA10048HN DVB-T Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb/frontends/tda10048.h new file mode 100644 index 00000000000..2b5c78e62c8 --- /dev/null +++ b/drivers/media/dvb/frontends/tda10048.h @@ -0,0 +1,63 @@ +/* + NXP TDA10048HN DVB OFDM demodulator driver + + Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef TDA10048_H +#define TDA10048_H + +#include <linux/dvb/frontend.h> +#include <linux/firmware.h> + +struct tda10048_config { + + /* the demodulator's i2c address */ + u8 demod_address; + + /* serial/parallel output */ +#define TDA10048_PARALLEL_OUTPUT 0 +#define TDA10048_SERIAL_OUTPUT 1 + u8 output_mode; + +#define TDA10048_BULKWRITE_200 200 +#define TDA10048_BULKWRITE_50 50 + u8 fwbulkwritelen; + + /* Spectral Inversion */ +#define TDA10048_INVERSION_OFF 0 +#define TDA10048_INVERSION_ON 1 + u8 inversion; +}; + +#if defined(CONFIG_DVB_TDA10048) || \ + (defined(CONFIG_DVB_TDA10048_MODULE) && defined(MODULE)) +extern struct dvb_frontend *tda10048_attach( + const struct tda10048_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *tda10048_attach( + const struct tda10048_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_TDA10048 */ + +#endif /* TDA10048_H */ diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 8415a8a5247..a0d63865356 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -131,16 +131,16 @@ static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data) u8 buf[] = { reg, data }; struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 }; - dprintk("%s: reg=0x%x, data=0x%x\n", __FUNCTION__, reg, data); + dprintk("%s: reg=0x%x, data=0x%x\n", __func__, reg, data); msg.addr = state->config->demod_address; ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n", - __FUNCTION__, reg, data, ret); + __func__, reg, data, ret); - dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __FUNCTION__, + dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } @@ -153,19 +153,19 @@ static int tda1004x_read_byte(struct tda1004x_state *state, int reg) struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 }, { .flags = I2C_M_RD, .buf = b1, .len = 1 }}; - dprintk("%s: reg=0x%x\n", __FUNCTION__, reg); + dprintk("%s: reg=0x%x\n", __func__, reg); msg[0].addr = state->config->demod_address; msg[1].addr = state->config->demod_address; ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { - dprintk("%s: error reg=0x%x, ret=%i\n", __FUNCTION__, reg, + dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret); return -1; } - dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __FUNCTION__, + dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__, reg, b1[0], ret); return b1[0]; } @@ -173,7 +173,7 @@ static int tda1004x_read_byte(struct tda1004x_state *state, int reg) static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data) { int val; - dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __FUNCTION__, reg, + dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __func__, reg, mask, data); // read a byte and check @@ -194,7 +194,7 @@ static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned ch int i; int result; - dprintk("%s: reg=0x%x, len=0x%x\n", __FUNCTION__, reg, len); + dprintk("%s: reg=0x%x, len=0x%x\n", __func__, reg, len); result = 0; for (i = 0; i < len; i++) { @@ -209,7 +209,7 @@ static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned ch static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state) { int result; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2); msleep(20); @@ -218,7 +218,7 @@ static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state) static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0); } @@ -345,7 +345,7 @@ static int tda1004x_do_upload(struct tda1004x_state *state, } pos += tx_size; - dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos); + dprintk("%s: fw_pos=0x%x\n", __func__, pos); } // give the DSP a chance to settle 03/10/05 Hac msleep(100); @@ -444,10 +444,10 @@ static void tda10046_init_plls(struct dvb_frontend* fe) tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3 } if (state->config->xtal_freq == TDA10046_XTAL_4M ) { - dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__); + dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __func__); tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0 } else { - dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __FUNCTION__); + dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __func__); tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3 } if(tda10046_clk53m) @@ -488,7 +488,7 @@ static int tda10046_fwupload(struct dvb_frontend* fe) if (state->config->xtal_freq == TDA10046_XTAL_4M) { tda1004x_write_byteI(state, TDA1004X_CONFC4, 0); } else { - dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __FUNCTION__); + dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __func__); tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80); } tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0); @@ -594,7 +594,7 @@ static int tda10045_init(struct dvb_frontend* fe) { struct tda1004x_state* state = fe->demodulator_priv; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (tda10045_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); @@ -624,7 +624,7 @@ static int tda10045_init(struct dvb_frontend* fe) static int tda10046_init(struct dvb_frontend* fe) { struct tda1004x_state* state = fe->demodulator_priv; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (tda10046_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); @@ -686,7 +686,7 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, int tmp; int inversion; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (state->demod_type == TDA1004X_DEMOD_TDA10046) { // setup auto offset @@ -881,7 +881,7 @@ static int tda1004x_get_fe(struct dvb_frontend* fe, struct dvb_frontend_paramete { struct tda1004x_state* state = fe->demodulator_priv; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); // inversion status fe_params->inversion = INVERSION_OFF; @@ -989,7 +989,7 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status int cber; int vber; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); // read status status = tda1004x_read_byte(state, TDA1004X_STATUS_CD); @@ -1048,7 +1048,7 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status } // success - dprintk("%s: fe_status=0x%x\n", __FUNCTION__, *fe_status); + dprintk("%s: fe_status=0x%x\n", __func__, *fe_status); return 0; } @@ -1058,7 +1058,7 @@ static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal) int tmp; int reg = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); // determine the register to use switch (state->demod_type) { @@ -1077,7 +1077,7 @@ static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal) return -EIO; *signal = (tmp << 8) | tmp; - dprintk("%s: signal=0x%x\n", __FUNCTION__, *signal); + dprintk("%s: signal=0x%x\n", __func__, *signal); return 0; } @@ -1086,7 +1086,7 @@ static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr) struct tda1004x_state* state = fe->demodulator_priv; int tmp; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); // read it tmp = tda1004x_read_byte(state, TDA1004X_SNR); @@ -1095,7 +1095,7 @@ static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr) tmp = 255 - tmp; *snr = ((tmp << 8) | tmp); - dprintk("%s: snr=0x%x\n", __FUNCTION__, *snr); + dprintk("%s: snr=0x%x\n", __func__, *snr); return 0; } @@ -1106,7 +1106,7 @@ static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) int tmp2; int counter; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); // read the UCBLOCKS and reset counter = 0; @@ -1132,7 +1132,7 @@ static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) else *ucblocks = 0xffffffff; - dprintk("%s: ucblocks=0x%x\n", __FUNCTION__, *ucblocks); + dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks); return 0; } @@ -1141,7 +1141,7 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber) struct tda1004x_state* state = fe->demodulator_priv; int tmp; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); // read it in tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB); @@ -1155,7 +1155,7 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber) // The address 0x20 should be read to cope with a TDA10046 bug tda1004x_read_byte(state, TDA1004X_CBER_RESET); - dprintk("%s: ber=0x%x\n", __FUNCTION__, *ber); + dprintk("%s: ber=0x%x\n", __func__, *ber); return 0; } @@ -1248,11 +1248,14 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10045 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1260,7 +1263,15 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10045; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + + if (id != 0x25) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } @@ -1307,11 +1318,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10046 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1319,7 +1333,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10046; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + if (id != 0x46) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h index abae8435014..4e27ffb0f14 100644 --- a/drivers/media/dvb/frontends/tda1004x.h +++ b/drivers/media/dvb/frontends/tda1004x.h @@ -94,7 +94,6 @@ struct tda1004x_config /* slave address and configuration of the tuner */ u8 tuner_address; - u8 tuner_config; u8 antenna_switch; /* if the board uses another I2c Bridge (tda8290), its address */ @@ -128,13 +127,13 @@ extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_TDA1004X diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c index 0d2b69a99ad..a17ce3c4ad8 100644 --- a/drivers/media/dvb/frontends/tda10086.c +++ b/drivers/media/dvb/frontends/tda10086.c @@ -43,7 +43,7 @@ struct tda10086_state { bool has_lock; }; -static int debug = 0; +static int debug; #define dprintk(args...) \ do { \ if (debug) printk(KERN_DEBUG "tda10086: " args); \ @@ -60,7 +60,7 @@ static int tda10086_write_byte(struct tda10086_state *state, int reg, int data) if (ret != 1) dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n", - __FUNCTION__, reg, data, ret); + __func__, reg, data, ret); return (ret != 1) ? ret : 0; } @@ -78,7 +78,7 @@ static int tda10086_read_byte(struct tda10086_state *state, int reg) ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { - dprintk("%s: error reg=0x%x, ret=%i\n", __FUNCTION__, reg, + dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret); return ret; } @@ -90,16 +90,16 @@ static int tda10086_write_mask(struct tda10086_state *state, int reg, int mask, { int val; - // read a byte and check + /* read a byte and check */ val = tda10086_read_byte(state, reg); if (val < 0) return val; - // mask if off + /* mask if off */ val = val & ~mask; val |= data & 0xff; - // write it out again + /* write it out again */ return tda10086_write_byte(state, reg, val); } @@ -108,62 +108,67 @@ static int tda10086_init(struct dvb_frontend* fe) struct tda10086_state* state = fe->demodulator_priv; u8 t22k_off = 0x80; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (state->config->diseqc_tone) t22k_off = 0; - // reset + /* reset */ tda10086_write_byte(state, 0x00, 0x00); msleep(10); - // misc setup + /* misc setup */ tda10086_write_byte(state, 0x01, 0x94); - tda10086_write_byte(state, 0x02, 0x35); // NOTE: TT drivers appear to disable CSWP + tda10086_write_byte(state, 0x02, 0x35); /* NOTE: TT drivers appear to disable CSWP */ tda10086_write_byte(state, 0x03, 0xe4); tda10086_write_byte(state, 0x04, 0x43); tda10086_write_byte(state, 0x0c, 0x0c); - tda10086_write_byte(state, 0x1b, 0xb0); // noise threshold - tda10086_write_byte(state, 0x20, 0x89); // misc - tda10086_write_byte(state, 0x30, 0x04); // acquisition period length - tda10086_write_byte(state, 0x32, 0x00); // irq off - tda10086_write_byte(state, 0x31, 0x56); // setup AFC - - // setup PLL (assumes 16Mhz XIN) - tda10086_write_byte(state, 0x55, 0x2c); // misc PLL setup - tda10086_write_byte(state, 0x3a, 0x0b); // M=12 - tda10086_write_byte(state, 0x3b, 0x01); // P=2 - tda10086_write_mask(state, 0x55, 0x20, 0x00); // powerup PLL - - // setup TS interface + tda10086_write_byte(state, 0x1b, 0xb0); /* noise threshold */ + tda10086_write_byte(state, 0x20, 0x89); /* misc */ + tda10086_write_byte(state, 0x30, 0x04); /* acquisition period length */ + tda10086_write_byte(state, 0x32, 0x00); /* irq off */ + tda10086_write_byte(state, 0x31, 0x56); /* setup AFC */ + + /* setup PLL (this assumes SACLK = 96MHz) */ + tda10086_write_byte(state, 0x55, 0x2c); /* misc PLL setup */ + if (state->config->xtal_freq == TDA10086_XTAL_16M) { + tda10086_write_byte(state, 0x3a, 0x0b); /* M=12 */ + tda10086_write_byte(state, 0x3b, 0x01); /* P=2 */ + } else { + tda10086_write_byte(state, 0x3a, 0x17); /* M=24 */ + tda10086_write_byte(state, 0x3b, 0x00); /* P=1 */ + } + tda10086_write_mask(state, 0x55, 0x20, 0x00); /* powerup PLL */ + + /* setup TS interface */ tda10086_write_byte(state, 0x11, 0x81); tda10086_write_byte(state, 0x12, 0x81); - tda10086_write_byte(state, 0x19, 0x40); // parallel mode A + MSBFIRST - tda10086_write_byte(state, 0x56, 0x80); // powerdown WPLL - unused in the mode we use - tda10086_write_byte(state, 0x57, 0x08); // bypass WPLL - unused in the mode we use + tda10086_write_byte(state, 0x19, 0x40); /* parallel mode A + MSBFIRST */ + tda10086_write_byte(state, 0x56, 0x80); /* powerdown WPLL - unused in the mode we use */ + tda10086_write_byte(state, 0x57, 0x08); /* bypass WPLL - unused in the mode we use */ tda10086_write_byte(state, 0x10, 0x2a); - // setup ADC - tda10086_write_byte(state, 0x58, 0x61); // ADC setup - tda10086_write_mask(state, 0x58, 0x01, 0x00); // powerup ADC + /* setup ADC */ + tda10086_write_byte(state, 0x58, 0x61); /* ADC setup */ + tda10086_write_mask(state, 0x58, 0x01, 0x00); /* powerup ADC */ - // setup AGC + /* setup AGC */ tda10086_write_byte(state, 0x05, 0x0B); tda10086_write_byte(state, 0x37, 0x63); - tda10086_write_byte(state, 0x3f, 0x0a); // NOTE: flydvb varies it + tda10086_write_byte(state, 0x3f, 0x0a); /* NOTE: flydvb varies it */ tda10086_write_byte(state, 0x40, 0x64); tda10086_write_byte(state, 0x41, 0x4f); tda10086_write_byte(state, 0x42, 0x43); - // setup viterbi - tda10086_write_byte(state, 0x1a, 0x11); // VBER 10^6, DVB, QPSK + /* setup viterbi */ + tda10086_write_byte(state, 0x1a, 0x11); /* VBER 10^6, DVB, QPSK */ - // setup carrier recovery + /* setup carrier recovery */ tda10086_write_byte(state, 0x3d, 0x80); - // setup SEC - tda10086_write_byte(state, 0x36, t22k_off); // all SEC off, 22k tone - tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); // } tone frequency - tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // } + /* setup SEC */ + tda10086_write_byte(state, 0x36, t22k_off); /* all SEC off, 22k tone */ + tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); + tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); return 0; } @@ -173,7 +178,7 @@ static void tda10086_diseqc_wait(struct tda10086_state *state) unsigned long timeout = jiffies + msecs_to_jiffies(200); while (!(tda10086_read_byte(state, 0x50) & 0x01)) { if(time_after(jiffies, timeout)) { - printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__); + printk("%s: diseqc queue not ready, command may be lost.\n", __func__); break; } msleep(10); @@ -185,7 +190,7 @@ static int tda10086_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) struct tda10086_state* state = fe->demodulator_priv; u8 t22k_off = 0x80; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (state->config->diseqc_tone) t22k_off = 0; @@ -211,7 +216,7 @@ static int tda10086_send_master_cmd (struct dvb_frontend* fe, u8 oldval; u8 t22k_off = 0x80; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (state->config->diseqc_tone) t22k_off = 0; @@ -239,7 +244,7 @@ static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minic u8 oldval = tda10086_read_byte(state, 0x36); u8 t22k_off = 0x80; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (state->config->diseqc_tone) t22k_off = 0; @@ -266,7 +271,7 @@ static int tda10086_set_inversion(struct tda10086_state *state, { u8 invval = 0x80; - dprintk ("%s %i %i\n", __FUNCTION__, fe_params->inversion, state->config->invert); + dprintk ("%s %i %i\n", __func__, fe_params->inversion, state->config->invert); switch(fe_params->inversion) { case INVERSION_OFF: @@ -300,9 +305,9 @@ static int tda10086_set_symbol_rate(struct tda10086_state *state, u32 bdri; u32 symbol_rate = fe_params->u.qpsk.symbol_rate; - dprintk ("%s %i\n", __FUNCTION__, symbol_rate); + dprintk ("%s %i\n", __func__, symbol_rate); - // setup the decimation and anti-aliasing filters.. + /* setup the decimation and anti-aliasing filters.. */ if (symbol_rate < (u32) (SACLK * 0.0137)) { dfn=4; afs=1; @@ -339,13 +344,13 @@ static int tda10086_set_symbol_rate(struct tda10086_state *state, byp=1; } - // calculate BDR + /* calculate BDR */ big = (1ULL<<21) * ((u64) symbol_rate/1000ULL) * (1ULL<<dfn); big += ((SACLK/1000ULL)-1ULL); do_div(big, (SACLK/1000ULL)); bdr = big & 0xfffff; - // calculate BDRI + /* calculate BDRI */ tmp = (1<<dfn)*(symbol_rate/1000); bdri = ((32 * (SACLK/1000)) + (tmp-1)) / tmp; @@ -366,7 +371,7 @@ static int tda10086_set_fec(struct tda10086_state *state, { u8 fecval; - dprintk ("%s %i\n", __FUNCTION__, fe_params->u.qpsk.fec_inner); + dprintk ("%s %i\n", __func__, fe_params->u.qpsk.fec_inner); switch(fe_params->u.qpsk.fec_inner) { case FEC_1_2: @@ -412,13 +417,13 @@ static int tda10086_set_frontend(struct dvb_frontend* fe, u32 freq = 0; int freqoff; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); - // modify parameters for tuning + /* modify parameters for tuning */ tda10086_write_byte(state, 0x02, 0x35); state->has_lock = false; - // set params + /* set params */ if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe, fe_params); if (fe->ops.i2c_gate_ctrl) @@ -430,7 +435,7 @@ static int tda10086_set_frontend(struct dvb_frontend* fe, fe->ops.i2c_gate_ctrl(fe, 0); } - // calcluate the frequency offset (in *Hz* not kHz) + /* calcluate the frequency offset (in *Hz* not kHz) */ freqoff = fe_params->frequency - freq; freqoff = ((1<<16) * freqoff) / (SACLK/1000); tda10086_write_byte(state, 0x3d, 0x80 | ((freqoff >> 8) & 0x7f)); @@ -443,7 +448,7 @@ static int tda10086_set_frontend(struct dvb_frontend* fe, if ((ret = tda10086_set_fec(state, fe_params)) < 0) return ret; - // soft reset + disable TS output until lock + /* soft reset + disable TS output until lock */ tda10086_write_mask(state, 0x10, 0x40, 0x40); tda10086_write_mask(state, 0x00, 0x01, 0x00); @@ -459,13 +464,13 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa int tmp; u64 tmp64; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); - // check for invalid symbol rate + /* check for invalid symbol rate */ if (fe_params->u.qpsk.symbol_rate < 500000) return -EINVAL; - // calculate the updated frequency (note: we convert from Hz->kHz) + /* calculate the updated frequency (note: we convert from Hz->kHz) */ tmp64 = tda10086_read_byte(state, 0x52); tmp64 |= (tda10086_read_byte(state, 0x51) << 8); if (tmp64 & 0x8000) @@ -474,7 +479,7 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa do_div(tmp64, (1ULL<<15) * (1ULL<<1)); fe_params->frequency = (int) state->frequency + (int) tmp64; - // the inversion + /* the inversion */ val = tda10086_read_byte(state, 0x0c); if (val & 0x80) { switch(val & 0x40) { @@ -505,7 +510,7 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa } } - // calculate the updated symbol rate + /* calculate the updated symbol rate */ tmp = tda10086_read_byte(state, 0x1d); if (tmp & 0x80) tmp |= 0xffffff00; @@ -513,7 +518,7 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa tmp = ((state->symbol_rate/1000) * tmp) / (1000000/1000); fe_params->u.qpsk.symbol_rate = state->symbol_rate + tmp; - // the FEC + /* the FEC */ val = (tda10086_read_byte(state, 0x0d) & 0x70) >> 4; switch(val) { case 0x00: @@ -550,7 +555,7 @@ static int tda10086_read_status(struct dvb_frontend* fe, fe_status_t *fe_status) struct tda10086_state* state = fe->demodulator_priv; u8 val; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); val = tda10086_read_byte(state, 0x0e); *fe_status = 0; @@ -566,7 +571,7 @@ static int tda10086_read_status(struct dvb_frontend* fe, fe_status_t *fe_status) *fe_status |= FE_HAS_LOCK; if (!state->has_lock) { state->has_lock = true; - // modify parameters for stable reception + /* modify parameters for stable reception */ tda10086_write_byte(state, 0x02, 0x00); } } @@ -579,7 +584,7 @@ static int tda10086_read_signal_strength(struct dvb_frontend* fe, u16 * signal) struct tda10086_state* state = fe->demodulator_priv; u8 _str; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); _str = 0xff - tda10086_read_byte(state, 0x43); *signal = (_str << 8) | _str; @@ -592,7 +597,7 @@ static int tda10086_read_snr(struct dvb_frontend* fe, u16 * snr) struct tda10086_state* state = fe->demodulator_priv; u8 _snr; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); _snr = 0xff - tda10086_read_byte(state, 0x1c); *snr = (_snr << 8) | _snr; @@ -604,12 +609,12 @@ static int tda10086_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { struct tda10086_state* state = fe->demodulator_priv; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); - // read it + /* read it */ *ucblocks = tda10086_read_byte(state, 0x18) & 0x7f; - // reset counter + /* reset counter */ tda10086_write_byte(state, 0x18, 0x00); tda10086_write_byte(state, 0x18, 0x80); @@ -620,9 +625,9 @@ static int tda10086_read_ber(struct dvb_frontend* fe, u32* ber) { struct tda10086_state* state = fe->demodulator_priv; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); - // read it + /* read it */ *ber = 0; *ber |= tda10086_read_byte(state, 0x15); *ber |= tda10086_read_byte(state, 0x16) << 8; @@ -635,7 +640,7 @@ static int tda10086_sleep(struct dvb_frontend* fe) { struct tda10086_state* state = fe->demodulator_priv; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); tda10086_write_mask(state, 0x00, 0x08, 0x08); @@ -646,7 +651,7 @@ static int tda10086_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct tda10086_state* state = fe->demodulator_priv; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); if (enable) { tda10086_write_mask(state, 0x00, 0x10, 0x10); @@ -737,7 +742,7 @@ struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, { struct tda10086_state *state; - dprintk ("%s\n", __FUNCTION__); + dprintk ("%s\n", __func__); /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL); diff --git a/drivers/media/dvb/frontends/tda10086.h b/drivers/media/dvb/frontends/tda10086.h index eeceaeee78f..61148c558d8 100644 --- a/drivers/media/dvb/frontends/tda10086.h +++ b/drivers/media/dvb/frontends/tda10086.h @@ -26,6 +26,11 @@ #include <linux/dvb/frontend.h> #include <linux/firmware.h> +enum tda10086_xtal { + TDA10086_XTAL_16M, + TDA10086_XTAL_4M +}; + struct tda10086_config { /* the demodulator's i2c address */ @@ -36,6 +41,9 @@ struct tda10086_config /* do we need the diseqc signal with carrier? */ u8 diseqc_tone; + + /* frequency of the reference xtal */ + enum tda10086_xtal xtal_freq; }; #if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE)) @@ -45,9 +53,9 @@ extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config static inline struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_TDA10086 +#endif /* CONFIG_DVB_TDA10086 */ -#endif // TDA10086_H +#endif /* TDA10086_H */ diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c index 011b74f798a..5b843b2e67e 100644 --- a/drivers/media/dvb/frontends/tda8083.c +++ b/drivers/media/dvb/frontends/tda8083.c @@ -68,7 +68,7 @@ static int tda8083_writereg (struct tda8083_state* state, u8 reg, u8 data) if (ret != 1) dprintk ("%s: writereg error (reg %02x, ret == %i)\n", - __FUNCTION__, reg, ret); + __func__, reg, ret); return (ret != 1) ? -1 : 0; } @@ -83,7 +83,7 @@ static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len if (ret != 2) dprintk ("%s: readreg error (reg %02x, ret == %i)\n", - __FUNCTION__, reg1, ret); + __func__, reg1, ret); return ret == 2 ? 0 : -1; } diff --git a/drivers/media/dvb/frontends/tda8083.h b/drivers/media/dvb/frontends/tda8083.h index 2d3307999f2..5a03c14a10e 100644 --- a/drivers/media/dvb/frontends/tda8083.h +++ b/drivers/media/dvb/frontends/tda8083.h @@ -42,7 +42,7 @@ extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, static inline struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_TDA8083 diff --git a/drivers/media/dvb/frontends/tda826x.c b/drivers/media/dvb/frontends/tda826x.c index bd3ebc28483..a051554b5e2 100644 --- a/drivers/media/dvb/frontends/tda826x.c +++ b/drivers/media/dvb/frontends/tda826x.c @@ -26,7 +26,7 @@ #include "tda826x.h" -static int debug = 0; +static int debug; #define dprintk(args...) \ do { \ if (debug) printk(KERN_DEBUG "tda826x: " args); \ @@ -54,7 +54,7 @@ static int tda826x_sleep(struct dvb_frontend *fe) u8 buf [] = { 0x00, 0x8d }; struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 2 }; - dprintk("%s:\n", __FUNCTION__); + dprintk("%s:\n", __func__); if (!priv->has_loopthrough) buf[1] = 0xad; @@ -62,7 +62,7 @@ static int tda826x_sleep(struct dvb_frontend *fe) if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { - dprintk("%s: i2c error\n", __FUNCTION__); + dprintk("%s: i2c error\n", __func__); } if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); @@ -75,13 +75,24 @@ static int tda826x_set_params(struct dvb_frontend *fe, struct dvb_frontend_param struct tda826x_priv *priv = fe->tuner_priv; int ret; u32 div; + u32 ksyms; + u32 bandwidth; u8 buf [11]; struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 11 }; - dprintk("%s:\n", __FUNCTION__); + dprintk("%s:\n", __func__); div = (params->frequency + (1000-1)) / 1000; + /* BW = ((1 + RO) * SR/2 + 5) * 1.3 [SR in MSPS, BW in MHz] */ + /* with R0 = 0.35 and some transformations: */ + ksyms = params->u.qpsk.symbol_rate / 1000; + bandwidth = (878 * ksyms + 6500000) / 1000000 + 1; + if (bandwidth < 5) + bandwidth = 5; + else if (bandwidth > 36) + bandwidth = 36; + buf[0] = 0x00; // subaddress buf[1] = 0x09; // powerdown RSSI + the magic value 1 if (!priv->has_loopthrough) @@ -89,7 +100,7 @@ static int tda826x_set_params(struct dvb_frontend *fe, struct dvb_frontend_param buf[2] = (1<<5) | 0x0b; // 1Mhz + 0.45 VCO buf[3] = div >> 7; buf[4] = div << 1; - buf[5] = 0x77; // baseband cut-off 19 MHz + buf[5] = ((bandwidth - 5) << 3) | 7; /* baseband cut-off */ buf[6] = 0xfe; // baseband gain 9 db + no RF attenuation buf[7] = 0x83; // charge pumps at high, tests off buf[8] = 0x80; // recommended value 4 for AMPVCO + disable ports. @@ -99,7 +110,7 @@ static int tda826x_set_params(struct dvb_frontend *fe, struct dvb_frontend_param if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { - dprintk("%s: i2c error\n", __FUNCTION__); + dprintk("%s: i2c error\n", __func__); } if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); @@ -138,7 +149,7 @@ struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2 }; int ret; - dprintk("%s:\n", __FUNCTION__); + dprintk("%s:\n", __func__); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); diff --git a/drivers/media/dvb/frontends/tda826x.h b/drivers/media/dvb/frontends/tda826x.h index ad998119596..89e97926ab2 100644 --- a/drivers/media/dvb/frontends/tda826x.h +++ b/drivers/media/dvb/frontends/tda826x.h @@ -45,7 +45,7 @@ static inline struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, int has_loopthrough) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_TDA826X diff --git a/drivers/media/dvb/frontends/tua6100.c b/drivers/media/dvb/frontends/tua6100.c index 6ba0029dcf2..1790baee014 100644 --- a/drivers/media/dvb/frontends/tua6100.c +++ b/drivers/media/dvb/frontends/tua6100.c @@ -58,7 +58,7 @@ static int tua6100_sleep(struct dvb_frontend *fe) if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { - printk("%s: i2c error\n", __FUNCTION__); + printk("%s: i2c error\n", __func__); } if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb/frontends/tua6100.h index 03a665e7df6..f83dbd5e42a 100644 --- a/drivers/media/dvb/frontends/tua6100.h +++ b/drivers/media/dvb/frontends/tua6100.h @@ -39,7 +39,7 @@ extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, st #else static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_TUA6100 diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c index 8791701c8f2..a184597f1d9 100644 --- a/drivers/media/dvb/frontends/ves1820.c +++ b/drivers/media/dvb/frontends/ves1820.c @@ -66,7 +66,7 @@ static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data) if (ret != 1) printk("ves1820: %s(): writereg error (reg == 0x%02x, " - "val == 0x%02x, ret == %i)\n", __FUNCTION__, reg, data, ret); + "val == 0x%02x, ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -EREMOTEIO : 0; } @@ -85,7 +85,7 @@ static u8 ves1820_readreg(struct ves1820_state *state, u8 reg) if (ret != 2) printk("ves1820: %s(): readreg error (reg == 0x%02x, " - "ret == %i)\n", __FUNCTION__, reg, ret); + "ret == %i)\n", __func__, reg, ret); return b1[0]; } diff --git a/drivers/media/dvb/frontends/ves1820.h b/drivers/media/dvb/frontends/ves1820.h index e4a2a324046..e902ed634ec 100644 --- a/drivers/media/dvb/frontends/ves1820.h +++ b/drivers/media/dvb/frontends/ves1820.h @@ -48,7 +48,7 @@ extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, static inline struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, struct i2c_adapter* i2c, u8 pwm) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_VES1820 diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c index 23fd0303c91..bd558960bd8 100644 --- a/drivers/media/dvb/frontends/ves1x93.c +++ b/drivers/media/dvb/frontends/ves1x93.c @@ -48,7 +48,7 @@ struct ves1x93_state { u8 demod_type; }; -static int debug = 0; +static int debug; #define dprintk if (debug) printk #define DEMOD_VES1893 0 @@ -98,7 +98,7 @@ static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data) int err; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data); + dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); return -EREMOTEIO; } @@ -179,7 +179,7 @@ static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate) u32 tmp; u32 FIN; - dprintk("%s: srate == %d\n", __FUNCTION__, (unsigned int) srate); + dprintk("%s: srate == %d\n", __func__, (unsigned int) srate); if (srate > state->config->xin/2) srate = state->config->xin/2; @@ -266,7 +266,7 @@ static int ves1x93_init (struct dvb_frontend* fe) int i; int val; - dprintk("%s: init chip\n", __FUNCTION__); + dprintk("%s: init chip\n", __func__); for (i = 0; i < state->tab_size; i++) { if (state->init_1x93_wtab[i]) { diff --git a/drivers/media/dvb/frontends/ves1x93.h b/drivers/media/dvb/frontends/ves1x93.h index d507f8966f8..8a5a49e808f 100644 --- a/drivers/media/dvb/frontends/ves1x93.h +++ b/drivers/media/dvb/frontends/ves1x93.h @@ -47,7 +47,7 @@ extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, static inline struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, struct i2c_adapter* i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif // CONFIG_DVB_VES1X93 diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index 276e3b631dc..36a5a1c101d 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -46,7 +46,7 @@ static int debug; if (debug) printk(KERN_DEBUG "zl10353: " args); \ } while (0) -static int debug_regs = 0; +static int debug_regs; static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val) { @@ -88,7 +88,7 @@ static int zl10353_read_register(struct zl10353_state *state, u8 reg) if (ret != 2) { printk("%s: readreg error (reg=%d, ret==%i)\n", - __FUNCTION__, reg, ret); + __func__, reg, ret); return ret; } @@ -152,7 +152,7 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, *nominal_rate = value; dprintk("%s: bw %d, adc_clock %d => 0x%x\n", - __FUNCTION__, bw, adc_clock, *nominal_rate); + __func__, bw, adc_clock, *nominal_rate); } static void zl10353_calc_input_freq(struct dvb_frontend *fe, @@ -181,7 +181,7 @@ static void zl10353_calc_input_freq(struct dvb_frontend *fe, *input_freq = -value; dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n", - __FUNCTION__, if2, ife, adc_clock, -(int)value, *input_freq); + __func__, if2, ife, adc_clock, -(int)value, *input_freq); } static int zl10353_sleep(struct dvb_frontend *fe) diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h index fc734c22b5f..fdbb88ff75f 100644 --- a/drivers/media/dvb/frontends/zl10353.h +++ b/drivers/media/dvb/frontends/zl10353.h @@ -47,7 +47,7 @@ extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config, static inline struct dvb_frontend* zl10353_attach(const struct zl10353_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif /* CONFIG_DVB_ZL10353 */ diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c index 08a2599ed74..960ed5763ae 100644 --- a/drivers/media/dvb/pluto2/pluto2.c +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -39,6 +39,8 @@ #include "dvbdev.h" #include "tda1004x.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define DRIVER_NAME "pluto2" #define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */ @@ -662,7 +664,8 @@ static int __devinit pluto2_probe(struct pci_dev *pdev, goto err_pluto_hw_exit; /* dvb */ - ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE, &pdev->dev); + ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, + THIS_MODULE, &pdev->dev, adapter_nr); if (ret < 0) goto err_i2c_del_adapter; diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index ae882432dd3..07643e01009 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -5,6 +5,7 @@ config TTPCI_EEPROM config DVB_AV7110 tristate "AV7110 cards" depends on DVB_CORE && PCI && I2C + depends on HOTPLUG select FW_LOADER if !DVB_AV7110_FIRMWARE select TTPCI_EEPROM select VIDEO_SAA7146_VV @@ -100,6 +101,7 @@ config DVB_BUDGET config DVB_BUDGET_CI tristate "Budget cards with onboard CI connector" depends on DVB_BUDGET_CORE && I2C + depends on INPUT # due to IR select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE @@ -123,6 +125,7 @@ config DVB_BUDGET_AV depends on DVB_BUDGET_CORE && I2C select VIDEO_SAA7146_VV depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV + depends on HOTPLUG # dependency of FW_LOADER select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 0e5701bdff1..f05d43d8b5c 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -51,6 +51,7 @@ #include <linux/crc32.h> #include <linux/i2c.h> #include <linux/kthread.h> +#include <asm/unaligned.h> #include <asm/system.h> @@ -112,6 +113,8 @@ MODULE_PARM_DESC(wss_cfg_16_9, "WSS 16:9 - default 0x0007 - bit 15: disable, 14: module_param(tv_standard, int, 0444); MODULE_PARM_DESC(tv_standard, "TV standard: 0 PAL (default), 1 NTSC"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static void restart_feeds(struct av7110 *av7110); static int av7110_num; @@ -359,7 +362,7 @@ static inline void start_debi_dma(struct av7110 *av7110, int dir, { dprintk(8, "%c %08lx %u\n", dir == DEBI_READ ? 'R' : 'W', addr, len); if (saa7146_wait_for_debi_done(av7110->dev, 0)) { - printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __FUNCTION__); + printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__); return; } @@ -497,7 +500,7 @@ static void gpioirq(unsigned long data) saa7146_read(av7110->dev, SSR)); if (saa7146_wait_for_debi_done(av7110->dev, 0)) { - printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __FUNCTION__); + printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__); BUG(); /* maybe we should try resetting the debi? */ } @@ -827,7 +830,7 @@ static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter) if (ret != 0 || handle >= 32) { printk("dvb-ttpci: %s error buf %04x %04x %04x %04x " "ret %d handle %04x\n", - __FUNCTION__, buf[0], buf[1], buf[2], buf[3], + __func__, buf[0], buf[1], buf[2], buf[3], ret, handle); dvbdmxfilter->hw_handle = 0xffff; if (!ret) @@ -854,7 +857,7 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) handle = dvbdmxfilter->hw_handle; if (handle >= 32) { printk("%s tried to stop invalid filter %04x, filter type = %x\n", - __FUNCTION__, handle, dvbdmxfilter->type); + __func__, handle, dvbdmxfilter->type); return -EINVAL; } @@ -867,7 +870,7 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) if (ret != 0 || answ[1] != handle) { printk("dvb-ttpci: %s error cmd %04x %04x %04x ret %x " "resp %04x %04x pid %d\n", - __FUNCTION__, buf[0], buf[1], buf[2], ret, + __func__, buf[0], buf[1], buf[2], ret, answ[0], answ[1], dvbdmxfilter->feed->pid); if (!ret) ret = -1; @@ -1122,7 +1125,7 @@ static int dvb_get_stc(struct dmx_demux *demux, unsigned int num, ret = av7110_fw_request(av7110, &tag, 0, fwstc, 4); if (ret) { - printk(KERN_ERR "%s: av7110_fw_request error\n", __FUNCTION__); + printk(KERN_ERR "%s: av7110_fw_request error\n", __func__); return ret; } dprintk(2, "fwstc = %04hx %04hx %04hx %04hx\n", @@ -1459,9 +1462,9 @@ static int check_firmware(struct av7110* av7110) ptr += 4; /* check dpram file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len >= 512) { printk("dvb-ttpci: dpram file is way too big.\n"); @@ -1476,9 +1479,9 @@ static int check_firmware(struct av7110* av7110) ptr += len; /* check root file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len <= 200000 || len >= 300000 || @@ -2461,7 +2464,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, goto err_kfree_0; ret = dvb_register_adapter(&av7110->dvb_adapter, av7110->card_name, - THIS_MODULE, &dev->pci->dev); + THIS_MODULE, &dev->pci->dev, adapter_nr); if (ret < 0) goto err_put_firmware_1; diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h index 39fbf7d5cff..e494e04eeee 100644 --- a/drivers/media/dvb/ttpci/av7110.h +++ b/drivers/media/dvb/ttpci/av7110.h @@ -40,7 +40,7 @@ extern int av7110_debug; #define dprintk(level,args...) \ - do { if ((av7110_debug & level)) { printk("dvb-ttpci: %s(): ", __FUNCTION__); printk(args); } } while (0) + do { if ((av7110_debug & level)) { printk("dvb-ttpci: %s(): ", __func__); printk(args); } } while (0) #define MAXFILT 32 diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 3e6b650fbb8..ec55a968f20 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -965,8 +965,9 @@ static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock) { - int i, n; + unsigned i, n; int progressive = 0; + int match = 0; dprintk(2, "av7110:%p, \n", av7110); @@ -975,12 +976,31 @@ static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len return -EBUSY; } - for (i = 0; i < len - 5; i++) { - /* get progressive flag from picture extension */ - if (buf[i] == 0x00 && buf[i+1] == 0x00 && - buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 && - (buf[i+4] & 0xf0) == 0x10) - progressive = buf[i+5] & 0x08; + /* search in buf for instances of 00 00 01 b5 1? */ + for (i = 0; i < len; i++) { + unsigned char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (match == 5) { + progressive = c & 0x08; + match = 0; + } + if (c == 0x00) { + match = (match == 1 || match == 2) ? 2 : 1; + continue; + } + switch (match++) { + case 2: if (c == 0x01) + continue; + break; + case 3: if (c == 0xb5) + continue; + break; + case 4: if ((c & 0xf0) == 0x10) + continue; + break; + } + match = 0; } /* setting n always > 1, fixes problems when playing stillframes diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index a468aa2e485..3a3f5279e92 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -53,11 +53,11 @@ int av7110_debiwrite(struct av7110 *av7110, u32 config, struct saa7146_dev *dev = av7110->dev; if (count <= 0 || count > 32764) { - printk("%s: invalid count %d\n", __FUNCTION__, count); + printk("%s: invalid count %d\n", __func__, count); return -1; } if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) { - printk("%s: wait_for_debi_done failed\n", __FUNCTION__); + printk("%s: wait_for_debi_done failed\n", __func__); return -1; } saa7146_write(dev, DEBI_CONFIG, config); @@ -76,11 +76,11 @@ u32 av7110_debiread(struct av7110 *av7110, u32 config, int addr, int count) u32 result = 0; if (count > 32764 || count <= 0) { - printk("%s: invalid count %d\n", __FUNCTION__, count); + printk("%s: invalid count %d\n", __func__, count); return 0; } if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) { - printk("%s: wait_for_debi_done #1 failed\n", __FUNCTION__); + printk("%s: wait_for_debi_done #1 failed\n", __func__); return 0; } saa7146_write(dev, DEBI_AD, av7110->debi_bus); @@ -91,7 +91,7 @@ u32 av7110_debiread(struct av7110 *av7110, u32 config, int addr, int count) if (count > 4) return count; if (saa7146_wait_for_debi_done(av7110->dev, 0) < 0) { - printk("%s: wait_for_debi_done #2 failed\n", __FUNCTION__); + printk("%s: wait_for_debi_done #2 failed\n", __func__); return 0; } @@ -332,7 +332,7 @@ int av7110_wait_msgstate(struct av7110 *av7110, u16 flags) break; if (err) { printk(KERN_ERR "%s: timeout waiting for MSGSTATE %04x\n", - __FUNCTION__, stat & flags); + __func__, stat & flags); return -ETIMEDOUT; } msleep(1); @@ -362,7 +362,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) break; if (err) { - printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND idle\n", __FUNCTION__); + printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND idle\n", __func__); av7110->arm_errors++; return -ETIMEDOUT; } @@ -379,7 +379,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) break; if (err) { - printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for HANDSHAKE_REG\n", __FUNCTION__); + printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for HANDSHAKE_REG\n", __func__); return -ETIMEDOUT; } msleep(1); @@ -419,14 +419,15 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); if (stat & flags[0]) { printk(KERN_ERR "%s: %s QUEUE overflow\n", - __FUNCTION__, type); + __func__, type); return -1; } if ((stat & flags[1]) == 0) break; if (err) { printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n", - __FUNCTION__, type); + __func__, type); + av7110->arm_errors++; return -ETIMEDOUT; } msleep(1); @@ -454,7 +455,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) break; if (err) { printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND %d to complete\n", - __FUNCTION__, (buf[0] >> 8) & 0xff); + __func__, (buf[0] >> 8) & 0xff); return -ETIMEDOUT; } msleep(1); @@ -462,11 +463,11 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); if (stat & GPMQOver) { - printk(KERN_ERR "dvb-ttpci: %s(): GPMQOver\n", __FUNCTION__); + printk(KERN_ERR "dvb-ttpci: %s(): GPMQOver\n", __func__); return -ENOSPC; } else if (stat & OSDQOver) { - printk(KERN_ERR "dvb-ttpci: %s(): OSDQOver\n", __FUNCTION__); + printk(KERN_ERR "dvb-ttpci: %s(): OSDQOver\n", __func__); return -ENOSPC; } #endif @@ -491,7 +492,7 @@ static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) mutex_unlock(&av7110->dcomlock); if (ret && ret!=-ERESTARTSYS) printk(KERN_ERR "dvb-ttpci: %s(): av7110_send_fw_cmd error %d\n", - __FUNCTION__, ret); + __func__, ret); return ret; } @@ -575,7 +576,7 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) break; if (err) { - printk(KERN_ERR "%s: timeout waiting for COMMAND to complete\n", __FUNCTION__); + printk(KERN_ERR "%s: timeout waiting for COMMAND to complete\n", __func__); mutex_unlock(&av7110->dcomlock); return -ETIMEDOUT; } @@ -591,7 +592,7 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) break; if (err) { - printk(KERN_ERR "%s: timeout waiting for HANDSHAKE_REG\n", __FUNCTION__); + printk(KERN_ERR "%s: timeout waiting for HANDSHAKE_REG\n", __func__); mutex_unlock(&av7110->dcomlock); return -ETIMEDOUT; } @@ -602,12 +603,12 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, #ifdef COM_DEBUG stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); if (stat & GPMQOver) { - printk(KERN_ERR "%s: GPMQOver\n", __FUNCTION__); + printk(KERN_ERR "%s: GPMQOver\n", __func__); mutex_unlock(&av7110->dcomlock); return -1; } else if (stat & OSDQOver) { - printk(KERN_ERR "%s: OSDQOver\n", __FUNCTION__); + printk(KERN_ERR "%s: OSDQOver\n", __func__); mutex_unlock(&av7110->dcomlock); return -1; } @@ -741,7 +742,7 @@ static int FlushText(struct av7110 *av7110) break; if (err) { printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for BUFF1_BASE == 0\n", - __FUNCTION__); + __func__); mutex_unlock(&av7110->dcomlock); return -ETIMEDOUT; } @@ -768,7 +769,7 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, char *buf) break; if (ret) { printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for BUFF1_BASE == 0\n", - __FUNCTION__); + __func__); mutex_unlock(&av7110->dcomlock); return -ETIMEDOUT; } @@ -782,7 +783,7 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, char *buf) break; if (ret) { printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for HANDSHAKE_REG\n", - __FUNCTION__); + __func__); mutex_unlock(&av7110->dcomlock); return -ETIMEDOUT; } @@ -853,10 +854,8 @@ static osd_raw_window_t bpp2bit[8] = { static inline int WaitUntilBmpLoaded(struct av7110 *av7110) { - int ret = wait_event_interruptible_timeout(av7110->bmpq, + int ret = wait_event_timeout(av7110->bmpq, av7110->bmp_state != BMP_LOADING, 10*HZ); - if (ret == -ERESTARTSYS) - return ret; if (ret == 0) { printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n", ret, av7110->bmp_state); diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c index a283e1de83f..23a1c6380d3 100644 --- a/drivers/media/dvb/ttpci/av7110_ir.c +++ b/drivers/media/dvb/ttpci/av7110_ir.c @@ -133,7 +133,7 @@ static void av7110_emit_key(unsigned long parm) break; default: - printk("%s invalid protocol %x\n", __FUNCTION__, ir->protocol); + printk("%s invalid protocol %x\n", __func__, ir->protocol); return; } @@ -143,7 +143,7 @@ static void av7110_emit_key(unsigned long parm) keycode = ir->key_map[data]; dprintk(16, "%s: code %08x -> addr %i data 0x%02x -> keycode %i\n", - __FUNCTION__, ircom, addr, data, keycode); + __func__, ircom, addr, data, keycode); /* check device address */ if (!(ir->device_mask & (1 << addr))) @@ -151,7 +151,7 @@ static void av7110_emit_key(unsigned long parm) if (!keycode) { printk ("%s: code %08x -> addr %i data 0x%02x -> unknown key!\n", - __FUNCTION__, ircom, addr, data); + __func__, ircom, addr, data); return; } diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index e2f066fb796..b4a0cc5dc93 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -573,7 +573,7 @@ static int av7110_vbi_reset(struct inode *inode, struct file *file) struct saa7146_dev *dev = fh->dev; struct av7110 *av7110 = (struct av7110*) dev->ext_priv; - dprintk(2, "%s\n", __FUNCTION__); + dprintk(2, "%s\n", __func__); av7110->wssMode = 0; av7110->wssData = 0; if (FW_VERSION(av7110->arm_app) < 0x2623) @@ -590,7 +590,7 @@ static ssize_t av7110_vbi_write(struct file *file, const char __user *data, size struct v4l2_sliced_vbi_data d; int rc; - dprintk(2, "%s\n", __FUNCTION__); + dprintk(2, "%s\n", __func__); if (FW_VERSION(av7110->arm_app) < 0x2623 || !av7110->wssMode || count != sizeof d) return -EINVAL; if (copy_from_user(&d, data, count)) diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 2d64d557b97..b30a5288e48 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -178,7 +178,7 @@ static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 addre udelay(1); result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); - if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) { + if (result == -ETIMEDOUT) { ciintf_slot_shutdown(ca, slot); printk(KERN_INFO "budget-av: cam ejected 3\n"); return -ETIMEDOUT; @@ -577,7 +577,7 @@ static struct stv0299_config typhoon_config = { .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, + .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, @@ -590,7 +590,7 @@ static struct stv0299_config cinergy_1200s_config = { .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_0, + .lock_output = STV0299_LOCKOUTPUT_0, .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, @@ -602,7 +602,7 @@ static struct stv0299_config cinergy_1200s_1894_0010_config = { .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, + .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, @@ -869,7 +869,7 @@ static struct stv0299_config philips_sd1878_config = { .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, + .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, @@ -941,6 +941,12 @@ static void frontend_init(struct budget_av *budget_av) switch (saa->pci->subsystem_device) { case SUBID_DVBS_KNC1: + /* + * maybe that setting is needed for other dvb-s cards as well, + * but so far it has been only confirmed for this type + */ + budget_av->reinitialise_demod = 1; + /* fall through */ case SUBID_DVBS_KNC1_PLUS: case SUBID_DVBS_EASYWATCH_1: if (saa->pci->subsystem_vendor == 0x1894) { diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 509349211d4..6530323d540 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -86,7 +86,7 @@ static int rc5_device = -1; module_param(rc5_device, int, 0644); MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); -static int ir_debug = 0; +static int ir_debug; module_param(ir_debug, int, 0644); MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); @@ -728,7 +728,7 @@ static struct stv0299_config philips_su1278_tt_config = { .mclk = 64000000UL, .invert = 0, .skip_reinit = 1, - .lock_output = STV0229_LOCKOUTPUT_1, + .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 50, .set_symbol_rate = philips_su1278_tt_set_symbol_rate, @@ -1121,7 +1121,7 @@ static void frontend_init(struct budget_ci *budget_ci) budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { - printk("%s: No LNBP21 found!\n", __FUNCTION__); + printk("%s: No LNBP21 found!\n", __func__); dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index 0252081f013..18cac4b12ab 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -57,6 +57,8 @@ module_param_named(bufsize, dma_buffer_size, int, 0444); MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /**************************************************************************** * TT budget / WinTV Nova ****************************************************************************/ @@ -223,7 +225,7 @@ static void vpeirq(unsigned long data) if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) { printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n", - budget->dev->name, __FUNCTION__, budget->buffer_warnings, count); + budget->dev->name, __func__, budget->buffer_warnings, count); budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT; budget->buffer_warnings = 0; } @@ -471,9 +473,10 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, budget->buffer_width, budget->buffer_height); printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); - if ((ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, owner, &budget->dev->pci->dev)) < 0) { + ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, + owner, &budget->dev->pci->dev, adapter_nr); + if (ret < 0) return ret; - } /* set dd1 stream a & b */ saa7146_write(dev, DD1_STREAM_B, 0x00000000); diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 14b00f57b5d..2293d80c6e5 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -45,6 +45,7 @@ #include "tda826x.h" #include "lnbp21.h" #include "bsru6.h" +#include "bsbe1.h" static int diseqc_method; module_param(diseqc_method, int, 0444); @@ -257,11 +258,17 @@ static struct ves1820_config alps_tdbe2_config = { static int grundig_29504_401_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { - struct budget* budget = (struct budget*) fe->dvb->priv; + struct budget *budget = fe->dvb->priv; + u8 *tuner_addr = fe->tuner_priv; u32 div; u8 cfg, cpump, band_select; u8 data[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) }; + + if (tuner_addr) + msg.addr = *tuner_addr; + else + msg.addr = 0x61; div = (36125000 + params->frequency) / 166666; @@ -292,6 +299,12 @@ static struct l64781_config grundig_29504_401_config = { .demod_address = 0x55, }; +static struct l64781_config grundig_29504_401_config_activy = { + .demod_address = 0x54, +}; + +static u8 tuner_address_grundig_29504_401_activy = 0x60; + static int grundig_29504_451_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct budget* budget = (struct budget*) fe->dvb->priv; @@ -346,14 +359,48 @@ static int s5h1420_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend static struct s5h1420_config s5h1420_config = { .demod_address = 0x53, .invert = 1, + .cdclk_polarity = 1, }; static struct tda10086_config tda10086_config = { .demod_address = 0x0e, .invert = 0, .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, }; +static struct stv0299_config alps_bsru6_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsru6_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, +}; + +static struct stv0299_config alps_bsbe1_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsbe1_set_symbol_rate, +}; + + +static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) +{ + u8 val; + struct i2c_msg msg[] = { + { .addr = adr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 } + }; + + return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val; +} + static u8 read_pwm(struct budget* budget) { u8 b = 0xff; @@ -369,6 +416,8 @@ static u8 read_pwm(struct budget* budget) static void frontend_init(struct budget *budget) { + (void)alps_bsbe1_config; /* avoid warning */ + switch(budget->dev->pci->subsystem_device) { case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) case 0x1013: @@ -414,15 +463,43 @@ static void frontend_init(struct budget *budget) } break; - case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059)) - budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; - budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; - budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */ + { + int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67); + + if (subtype < 0) + break; + /* fixme: find a better way to identify the card */ + if (subtype < 0x36) { + /* assume ALPS BSRU6 */ + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } + } else { + /* assume ALPS BSBE1 */ + /* reset tuner */ + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI); + msleep(250); + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } } break; + } case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); @@ -433,12 +510,20 @@ static void frontend_init(struct budget *budget) } break; + case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ + budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy; + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + } + break; + case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params; if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { - printk("%s: No LNBP21 found!\n", __FUNCTION__); + printk("%s: No LNBP21 found!\n", __func__); goto error_out; } break; @@ -454,9 +539,9 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap); if (budget->dvb_frontend) { if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL) - printk("%s: No tda826x found!\n", __FUNCTION__); + printk("%s: No tda826x found!\n", __func__); if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { - printk("%s: No LNBP21 found!\n", __FUNCTION__); + printk("%s: No LNBP21 found!\n", __func__); goto error_out; } break; @@ -537,6 +622,7 @@ MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), @@ -547,6 +633,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), + MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), { .vendor = 0, } diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h index d764ffa728b..dd450b739bf 100644 --- a/drivers/media/dvb/ttpci/budget.h +++ b/drivers/media/dvb/ttpci/budget.h @@ -1,3 +1,4 @@ + #ifndef __BUDGET_DVB__ #define __BUDGET_DVB__ @@ -21,7 +22,7 @@ extern int budget_debug; #endif #define dprintk(level,args...) \ - do { if ((budget_debug & level)) { printk("%s: %s(): ", KBUILD_MODNAME, __FUNCTION__); printk(args); } } while (0) + do { if ((budget_debug & level)) { printk("%s: %s(): ", KBUILD_MODNAME, __func__); printk(args); } } while (0) struct budget_info { char *name; diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/dvb/ttpci/ttpci-eeprom.c index 1f31e91195b..7dd54b3026a 100644 --- a/drivers/media/dvb/ttpci/ttpci-eeprom.c +++ b/drivers/media/dvb/ttpci/ttpci-eeprom.c @@ -95,7 +95,7 @@ static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encode { .addr = 0x50, .flags = I2C_M_RD, .buf = encodedMAC, .len = 20 } }; - /* dprintk("%s\n", __FUNCTION__); */ + /* dprintk("%s\n", __func__); */ ret = i2c_transfer(adapter, msg, 2); diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 7902ae1d9a1..5d2d81ab237 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -56,10 +56,11 @@ */ static int debug; - module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define dprintk(x...) do { if (debug) printk(KERN_DEBUG x); } while (0) #define ISO_BUF_COUNT 4 @@ -153,12 +154,12 @@ static int ttusb_cmd(struct ttusb *ttusb, (u8 *) data, len, &actual_len, 1000); if (err != 0) { dprintk("%s: usb_bulk_msg(send) failed, err == %i!\n", - __FUNCTION__, err); + __func__, err); mutex_unlock(&ttusb->semusb); return err; } if (actual_len != len) { - dprintk("%s: only wrote %d of %d bytes\n", __FUNCTION__, + dprintk("%s: only wrote %d of %d bytes\n", __func__, actual_len, len); mutex_unlock(&ttusb->semusb); return -1; @@ -168,7 +169,7 @@ static int ttusb_cmd(struct ttusb *ttusb, ttusb->last_result, 32, &actual_len, 1000); if (err != 0) { - printk("%s: failed, receive error %d\n", __FUNCTION__, + printk("%s: failed, receive error %d\n", __func__, err); mutex_unlock(&ttusb->semusb); return err; @@ -229,7 +230,7 @@ static int ttusb_i2c_msg(struct ttusb *ttusb, if (err || b[0] != 0x55 || b[1] != id) { dprintk ("%s: usb_bulk_msg(recv) failed, err == %i, id == %02x, b == ", - __FUNCTION__, err, id); + __func__, err, id); return -EREMOTEIO; } @@ -273,7 +274,7 @@ static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num snd_buf, snd_len, rcv_buf, rcv_len); if (err < rcv_len) { - dprintk("%s: i == %i\n", __FUNCTION__, i); + dprintk("%s: i == %i\n", __func__, i); break; } @@ -327,7 +328,7 @@ static int ttusb_boot_dsp(struct ttusb *ttusb) done: if (err) { dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __FUNCTION__, err); + __func__, err); } return err; @@ -427,7 +428,7 @@ static int ttusb_init_controller(struct ttusb *ttusb) if ((err = ttusb_result(ttusb, get_version, sizeof(get_version)))) return err; - dprintk("%s: stc-version: %c%c%c%c%c\n", __FUNCTION__, + dprintk("%s: stc-version: %c%c%c%c%c\n", __func__, get_version[4], get_version[5], get_version[6], get_version[7], get_version[8]); @@ -437,7 +438,7 @@ static int ttusb_init_controller(struct ttusb *ttusb) memcmp(get_version + 4, "V 2.2", 5)) { printk ("%s: unknown STC version %c%c%c%c%c, please report!\n", - __FUNCTION__, get_version[4], get_version[5], + __func__, get_version[4], get_version[5], get_version[6], get_version[7], get_version[8]); } @@ -453,7 +454,7 @@ static int ttusb_init_controller(struct ttusb *ttusb) ttusb_result(ttusb, get_dsp_version, sizeof(get_dsp_version)); if (err) return err; - printk("%s: dsp-version: %c%c%c\n", __FUNCTION__, + printk("%s: dsp-version: %c%c%c\n", __func__, get_dsp_version[4], get_dsp_version[5], get_dsp_version[6]); return 0; } @@ -476,7 +477,7 @@ static int ttusb_send_diseqc(struct dvb_frontend* fe, /* Diseqc */ if ((err = ttusb_cmd(ttusb, b, 4 + b[3], 0))) { dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __FUNCTION__, err); + __func__, err); } return err; @@ -494,7 +495,7 @@ static int ttusb_update_lnb(struct ttusb *ttusb) /* SetLNB */ if ((err = ttusb_cmd(ttusb, b, sizeof(b), 0))) { dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __FUNCTION__, err); + __func__, err); } return err; @@ -528,7 +529,7 @@ static void ttusb_set_led_freq(struct ttusb *ttusb, u8 freq) err = ttusb_cmd(ttusb, b, sizeof(b), 0); if (err) { dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __FUNCTION__, err); + __func__, err); } } #endif @@ -542,7 +543,7 @@ static void ttusb_handle_sec_data(struct ttusb_channel *channel, const u8 * data, int len); #endif -static int numpkt = 0, numts, numstuff, numsec, numinvalid; +static int numpkt, numts, numstuff, numsec, numinvalid; static unsigned long lastj; static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, @@ -551,10 +552,10 @@ static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, u16 csum = 0, cc; int i; for (i = 0; i < len; i += 2) - csum ^= le16_to_cpup((u16 *) (muxpack + i)); + csum ^= le16_to_cpup((__le16 *) (muxpack + i)); if (csum) { printk("%s: muxpack with incorrect checksum, ignoring\n", - __FUNCTION__); + __func__); numinvalid++; return; } @@ -563,7 +564,7 @@ static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, cc &= 0x7FFF; if ((cc != ttusb->cc) && (ttusb->cc != -1)) printk("%s: cc discontinuity (%d frames missing)\n", - __FUNCTION__, (cc - ttusb->cc) & 0x7FFF); + __func__, (cc - ttusb->cc) & 0x7FFF); ttusb->cc = (cc + 1) & 0x7FFF; if (muxpack[0] & 0x80) { #ifdef TTUSB_HWSECTIONS @@ -613,7 +614,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len) int maxwork = 1024; while (len) { if (!(maxwork--)) { - printk("%s: too much work\n", __FUNCTION__); + printk("%s: too much work\n", __func__); break; } @@ -632,7 +633,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len) #else if (ttusb->insync) { printk("%s: lost sync.\n", - __FUNCTION__); + __func__); ttusb->insync = 0; } #endif @@ -691,7 +692,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len) else { dprintk ("%s: invalid state: first byte is %x\n", - __FUNCTION__, + __func__, ttusb->muxpack[0]); ttusb->mux_state = 0; } @@ -740,7 +741,7 @@ static void ttusb_iso_irq(struct urb *urb) #if 0 printk("%s: status %d, errcount == %d, length == %i\n", - __FUNCTION__, + __func__, urb->status, urb->error_count, urb->actual_length); #endif @@ -833,7 +834,7 @@ static int ttusb_start_iso_xfer(struct ttusb *ttusb) int i, j, err, buffer_offset = 0; if (ttusb->iso_streaming) { - printk("%s: iso xfer already running!\n", __FUNCTION__); + printk("%s: iso xfer already running!\n", __func__); return 0; } @@ -869,7 +870,7 @@ static int ttusb_start_iso_xfer(struct ttusb *ttusb) ttusb_stop_iso_xfer(ttusb); printk ("%s: failed urb submission (%i: err = %i)!\n", - __FUNCTION__, i, err); + __func__, i, err); return err; } } @@ -1005,7 +1006,7 @@ static int stc_release(struct inode *inode, struct file *file) return 0; } -static struct file_operations stc_fops = { +static const struct file_operations stc_fops = { .owner = THIS_MODULE, .read = stc_read, .open = stc_open, @@ -1313,7 +1314,7 @@ static struct stv0299_config alps_stv0299_config = { .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, + .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, .set_symbol_rate = alps_stv0299_set_symbol_rate, @@ -1643,7 +1644,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i struct ttusb *ttusb; int result; - dprintk("%s: TTUSB DVB connected\n", __FUNCTION__); + dprintk("%s: TTUSB DVB connected\n", __func__); udev = interface_to_usbdev(intf); @@ -1669,7 +1670,10 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i mutex_unlock(&ttusb->semi2c); - if ((result = dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE, &udev->dev)) < 0) { + result = dvb_register_adapter(&ttusb->adapter, + "Technotrend/Hauppauge Nova-USB", + THIS_MODULE, &udev->dev, adapter_nr); + if (result < 0) { ttusb_free_iso_urbs(ttusb); kfree(ttusb); return result; @@ -1773,7 +1777,7 @@ static void ttusb_disconnect(struct usb_interface *intf) kfree(ttusb); - dprintk("%s: TTUSB DVB disconnected\n", __FUNCTION__); + dprintk("%s: TTUSB DVB disconnected\n", __func__); } static struct usb_device_id ttusb_table[] = { diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig index 83611012ef3..a23cc0aa17d 100644 --- a/drivers/media/dvb/ttusb-dec/Kconfig +++ b/drivers/media/dvb/ttusb-dec/Kconfig @@ -1,6 +1,7 @@ config DVB_TTUSB_DEC tristate "Technotrend/Hauppauge USB DEC devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT + depends on HOTPLUG # due to FW_LOADER select FW_LOADER select CRC32 help diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 1ec981d98b9..fefdc05e84a 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -52,6 +52,8 @@ MODULE_PARM_DESC(output_pva, "Output PVA from dvr device (default:off)"); module_param(enable_rc, int, 0644); MODULE_PARM_DESC(enable_rc, "Turn on/off IR remote control(default: off)"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define dprintk if (debug) printk #define DRIVER_NAME "TechnoTrend/Hauppauge DEC USB" @@ -217,11 +219,11 @@ static void ttusb_dec_handle_irq( struct urb *urb) case -ETIME: /* this urb is dead, cleanup */ dprintk("%s:urb shutting down with status: %d\n", - __FUNCTION__, urb->status); + __func__, urb->status); return; default: dprintk("%s:nonzero status received: %d\n", - __FUNCTION__,urb->status); + __func__,urb->status); goto exit; } @@ -235,7 +237,7 @@ static void ttusb_dec_handle_irq( struct urb *urb) * keyrepeat signal is recieved for lets say 200ms. * this should/could be added later ... * for now lets report each signal as a key down and up*/ - dprintk("%s:rc signal:%d\n", __FUNCTION__, buffer[4]); + dprintk("%s:rc signal:%d\n", __func__, buffer[4]); input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1); input_sync(dec->rc_input_dev); input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0); @@ -245,7 +247,7 @@ static void ttusb_dec_handle_irq( struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if(retval) printk("%s - usb_commit_urb failed with result: %d\n", - __FUNCTION__, retval); + __func__, retval); } static u16 crc16(u16 crc, const u8 *buf, size_t len) @@ -268,7 +270,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command, int result, actual_len, i; u8 *b; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); b = kmalloc(COMMAND_PACKET_SIZE + 4, GFP_KERNEL); if (!b) @@ -276,7 +278,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command, if ((result = mutex_lock_interruptible(&dec->usb_mutex))) { kfree(b); - printk("%s: Failed to lock usb mutex.\n", __FUNCTION__); + printk("%s: Failed to lock usb mutex.\n", __func__); return result; } @@ -289,7 +291,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command, memcpy(&b[4], params, param_length); if (debug) { - printk("%s: command: ", __FUNCTION__); + printk("%s: command: ", __func__); for (i = 0; i < param_length + 4; i++) printk("0x%02X ", b[i]); printk("\n"); @@ -300,7 +302,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command, if (result) { printk("%s: command bulk message failed: error %d\n", - __FUNCTION__, result); + __func__, result); mutex_unlock(&dec->usb_mutex); kfree(b); return result; @@ -311,13 +313,13 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command, if (result) { printk("%s: result bulk message failed: error %d\n", - __FUNCTION__, result); + __func__, result); mutex_unlock(&dec->usb_mutex); kfree(b); return result; } else { if (debug) { - printk("%s: result: ", __FUNCTION__); + printk("%s: result: ", __func__); for (i = 0; i < actual_len; i++) printk("0x%02X ", b[i]); printk("\n"); @@ -341,9 +343,9 @@ static int ttusb_dec_get_stb_state (struct ttusb_dec *dec, unsigned int *mode, u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; - unsigned int tmp; + __be32 tmp; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); result = ttusb_dec_send_command(dec, 0x08, 0, NULL, &c_length, c); if (result) @@ -396,11 +398,11 @@ static void ttusb_dec_set_pids(struct ttusb_dec *dec) 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - u16 pcr = htons(dec->pid[DMX_PES_PCR]); - u16 audio = htons(dec->pid[DMX_PES_AUDIO]); - u16 video = htons(dec->pid[DMX_PES_VIDEO]); + __be16 pcr = htons(dec->pid[DMX_PES_PCR]); + __be16 audio = htons(dec->pid[DMX_PES_AUDIO]); + __be16 video = htons(dec->pid[DMX_PES_VIDEO]); - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); memcpy(&b[0], &pcr, 2); memcpy(&b[2], &audio, 2); @@ -419,12 +421,12 @@ static void ttusb_dec_set_pids(struct ttusb_dec *dec) static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) { if (length < 8) { - printk("%s: packet too short - discarding\n", __FUNCTION__); + printk("%s: packet too short - discarding\n", __func__); return; } if (length > 8 + MAX_PVA_LENGTH) { - printk("%s: packet too long - discarding\n", __FUNCTION__); + printk("%s: packet too long - discarding\n", __func__); return; } @@ -433,7 +435,7 @@ static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) case 0x01: { /* VideoStream */ int prebytes = pva[5] & 0x03; int postbytes = (pva[5] & 0x0c) >> 2; - u16 v_pes_payload_length; + __be16 v_pes_payload_length; if (output_pva) { dec->video_filter->feed->cb.ts(pva, length, NULL, 0, @@ -507,7 +509,7 @@ static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) break; default: - printk("%s: unknown PVA type: %02x.\n", __FUNCTION__, + printk("%s: unknown PVA type: %02x.\n", __func__, pva[2]); break; } @@ -546,7 +548,7 @@ static void ttusb_dec_process_packet(struct ttusb_dec *dec) u16 packet_id; if (dec->packet_length % 2) { - printk("%s: odd sized packet - discarding\n", __FUNCTION__); + printk("%s: odd sized packet - discarding\n", __func__); return; } @@ -554,7 +556,7 @@ static void ttusb_dec_process_packet(struct ttusb_dec *dec) csum ^= ((dec->packet[i] << 8) + dec->packet[i + 1]); if (csum) { - printk("%s: checksum failed - discarding\n", __FUNCTION__); + printk("%s: checksum failed - discarding\n", __func__); return; } @@ -563,7 +565,7 @@ static void ttusb_dec_process_packet(struct ttusb_dec *dec) if ((packet_id != dec->next_packet_id) && dec->next_packet_id) { printk("%s: warning: lost packets between %u and %u\n", - __FUNCTION__, dec->next_packet_id - 1, packet_id); + __func__, dec->next_packet_id - 1, packet_id); } if (packet_id == 0xffff) @@ -652,7 +654,7 @@ static void ttusb_dec_process_urb_frame(struct ttusb_dec *dec, u8 *b, dec->packet_state = 7; } else { printk("%s: unknown packet type: " - "%02x%02x\n", __FUNCTION__, + "%02x%02x\n", __func__, dec->packet[0], dec->packet[1]); dec->packet_state = 0; } @@ -724,7 +726,7 @@ static void ttusb_dec_process_urb_frame(struct ttusb_dec *dec, u8 *b, default: printk("%s: illegal packet state encountered.\n", - __FUNCTION__); + __func__); dec->packet_state = 0; } } @@ -792,7 +794,7 @@ static void ttusb_dec_process_urb(struct urb *urb) } else { /* -ENOENT is expected when unlinking urbs */ if (urb->status != -ENOENT) - dprintk("%s: urb error: %d\n", __FUNCTION__, + dprintk("%s: urb error: %d\n", __func__, urb->status); } @@ -804,7 +806,7 @@ static void ttusb_dec_setup_urbs(struct ttusb_dec *dec) { int i, j, buffer_offset = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); for (i = 0; i < ISO_BUF_COUNT; i++) { int frame_offset = 0; @@ -834,7 +836,7 @@ static void ttusb_dec_stop_iso_xfer(struct ttusb_dec *dec) { int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (mutex_lock_interruptible(&dec->iso_mutex)) return; @@ -889,7 +891,7 @@ static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec) { int i, result; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (mutex_lock_interruptible(&dec->iso_mutex)) return -EAGAIN; @@ -905,7 +907,7 @@ static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec) if ((result = usb_submit_urb(dec->iso_urb[i], GFP_ATOMIC))) { printk("%s: failed urb submission %d: " - "error %d\n", __FUNCTION__, i, result); + "error %d\n", __func__, i, result); while (i) { usb_kill_urb(dec->iso_urb[i - 1]); @@ -932,7 +934,7 @@ static int ttusb_dec_start_ts_feed(struct dvb_demux_feed *dvbdmxfeed) u8 b0[] = { 0x05 }; int result = 0; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dprintk(" ts_type:"); @@ -1004,7 +1006,7 @@ static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u16 pid; + __be16 pid; u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; @@ -1012,7 +1014,7 @@ static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed) unsigned long flags; u8 x = 1; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); pid = htons(dvbdmxfeed->pid); memcpy(&b0[0], &pid, 2); @@ -1052,7 +1054,7 @@ static int ttusb_dec_start_feed(struct dvb_demux_feed *dvbdmxfeed) { struct dvb_demux *dvbdmx = dvbdmxfeed->demux; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (!dvbdmx->dmx.frontend) return -EINVAL; @@ -1113,7 +1115,7 @@ static int ttusb_dec_stop_sec_feed(struct dvb_demux_feed *dvbdmxfeed) static int ttusb_dec_stop_feed(struct dvb_demux_feed *dvbdmxfeed) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); switch (dvbdmxfeed->type) { case DMX_TYPE_TS: @@ -1132,7 +1134,7 @@ static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec) { int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); for (i = 0; i < ISO_BUF_COUNT; i++) usb_free_urb(dec->iso_urb[i]); @@ -1147,7 +1149,7 @@ static int ttusb_dec_alloc_iso_urbs(struct ttusb_dec *dec) { int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dec->iso_buffer = pci_alloc_consistent(NULL, ISO_FRAME_SIZE * @@ -1214,7 +1216,7 @@ static int ttusb_init_rc( struct ttusb_dec *dec) dec->rc_input_dev = input_dev; if (usb_submit_urb(dec->irq_urb, GFP_KERNEL)) - printk("%s: usb_submit_urb failed\n",__FUNCTION__); + printk("%s: usb_submit_urb failed\n",__func__); /* enable irq pipe */ ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL); @@ -1223,7 +1225,7 @@ static int ttusb_init_rc( struct ttusb_dec *dec) static void ttusb_dec_init_v_pes(struct ttusb_dec *dec) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dec->v_pes[0] = 0x00; dec->v_pes[1] = 0x00; @@ -1233,7 +1235,7 @@ static void ttusb_dec_init_v_pes(struct ttusb_dec *dec) static int ttusb_dec_init_usb(struct ttusb_dec *dec) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); mutex_init(&dec->usb_mutex); mutex_init(&dec->iso_mutex); @@ -1276,16 +1278,17 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) u8 *firmware = NULL; size_t firmware_size = 0; u16 firmware_csum = 0; - u16 firmware_csum_ns; - u32 firmware_size_nl; - u32 crc32_csum, crc32_check, tmp; + __be16 firmware_csum_ns; + __be32 firmware_size_nl; + u32 crc32_csum, crc32_check; + __be32 tmp; const struct firmware *fw_entry = NULL; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (request_firmware(&fw_entry, dec->firmware_name, &dec->udev->dev)) { printk(KERN_ERR "%s: Firmware (%s) unavailable.\n", - __FUNCTION__, dec->firmware_name); + __func__, dec->firmware_name); return 1; } @@ -1294,7 +1297,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) if (firmware_size < 60) { printk("%s: firmware size too small for DSP code (%zu < 60).\n", - __FUNCTION__, firmware_size); + __func__, firmware_size); release_firmware(fw_entry); return -1; } @@ -1304,11 +1307,11 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) valid. */ crc32_csum = crc32(~0L, firmware, 56) ^ ~0L; memcpy(&tmp, &firmware[56], 4); - crc32_check = htonl(tmp); + crc32_check = ntohl(tmp); if (crc32_csum != crc32_check) { printk("%s: crc32 check of DSP code failed (calculated " "0x%08x != 0x%08x in file), file invalid.\n", - __FUNCTION__, crc32_csum, crc32_check); + __func__, crc32_csum, crc32_check); release_firmware(fw_entry); return -1; } @@ -1376,7 +1379,7 @@ static int ttusb_dec_init_stb(struct ttusb_dec *dec) int result; unsigned int mode, model, version; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); result = ttusb_dec_get_stb_state(dec, &mode, &model, &version); @@ -1415,7 +1418,7 @@ static int ttusb_dec_init_stb(struct ttusb_dec *dec) default: printk(KERN_ERR "%s: unknown model returned " "by firmware (%08x) - please report\n", - __FUNCTION__, model); + __func__, model); return -1; break; } @@ -1434,12 +1437,14 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) { int result; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if ((result = dvb_register_adapter(&dec->adapter, - dec->model_name, THIS_MODULE, &dec->udev->dev)) < 0) { + dec->model_name, THIS_MODULE, + &dec->udev->dev, + adapter_nr)) < 0) { printk("%s: dvb_register_adapter failed: error %d\n", - __FUNCTION__, result); + __func__, result); return result; } @@ -1454,7 +1459,7 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) dec->demux.write_to_decoder = NULL; if ((result = dvb_dmx_init(&dec->demux)) < 0) { - printk("%s: dvb_dmx_init failed: error %d\n", __FUNCTION__, + printk("%s: dvb_dmx_init failed: error %d\n", __func__, result); dvb_unregister_adapter(&dec->adapter); @@ -1468,7 +1473,7 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) if ((result = dvb_dmxdev_init(&dec->dmxdev, &dec->adapter)) < 0) { printk("%s: dvb_dmxdev_init failed: error %d\n", - __FUNCTION__, result); + __func__, result); dvb_dmx_release(&dec->demux); dvb_unregister_adapter(&dec->adapter); @@ -1480,7 +1485,7 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) if ((result = dec->demux.dmx.add_frontend(&dec->demux.dmx, &dec->frontend)) < 0) { - printk("%s: dvb_dmx_init failed: error %d\n", __FUNCTION__, + printk("%s: dvb_dmx_init failed: error %d\n", __func__, result); dvb_dmxdev_release(&dec->dmxdev); @@ -1492,7 +1497,7 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) if ((result = dec->demux.dmx.connect_frontend(&dec->demux.dmx, &dec->frontend)) < 0) { - printk("%s: dvb_dmx_init failed: error %d\n", __FUNCTION__, + printk("%s: dvb_dmx_init failed: error %d\n", __func__, result); dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend); @@ -1510,7 +1515,7 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) static void ttusb_dec_exit_dvb(struct ttusb_dec *dec) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dvb_net_release(&dec->dvb_net); dec->demux.dmx.close(&dec->demux.dmx); @@ -1528,7 +1533,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec) static void ttusb_dec_exit_rc(struct ttusb_dec *dec) { - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); /* we have to check whether the irq URB is already submitted. * As the irq is submitted after the interface is changed, * this is the best method i figured out. @@ -1552,7 +1557,7 @@ static void ttusb_dec_exit_usb(struct ttusb_dec *dec) { int i; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); dec->iso_stream_count = 0; @@ -1612,18 +1617,18 @@ static int ttusb_dec_probe(struct usb_interface *intf, struct usb_device *udev; struct ttusb_dec *dec; - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); udev = interface_to_usbdev(intf); if (!(dec = kzalloc(sizeof(struct ttusb_dec), GFP_KERNEL))) { - printk("%s: couldn't allocate memory.\n", __FUNCTION__); + printk("%s: couldn't allocate memory.\n", __func__); return -ENOMEM; } usb_set_intfdata(intf, (void *)dec); - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: ttusb_dec_set_model(dec, TTUSB_DEC3000S); break; @@ -1648,7 +1653,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, ttusb_dec_init_dvb(dec); dec->adapter.priv = dec; - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: dec->fe = ttusbdecfe_dvbs_attach(&fe_config); break; @@ -1692,7 +1697,7 @@ static void ttusb_dec_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); - dprintk("%s\n", __FUNCTION__); + dprintk("%s\n", __func__); if (dec->active) { ttusb_dec_exit_tasklet(dec); @@ -1749,7 +1754,7 @@ static int __init ttusb_dec_init(void) int result; if ((result = usb_register(&ttusb_dec_driver)) < 0) { - printk("%s: initialisation failed: error %d.\n", __FUNCTION__, + printk("%s: initialisation failed: error %d.\n", __func__, result); return result; } diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index a6fb1d6a7b5..443af24097f 100644 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -53,7 +53,7 @@ static int ttusbdecfe_read_status(struct dvb_frontend* fe, fe_status_t* status) return ret; if(len != 4) { - printk(KERN_ERR "%s: unexpected reply\n", __FUNCTION__); + printk(KERN_ERR "%s: unexpected reply\n", __func__); return -EIO; } @@ -70,7 +70,7 @@ static int ttusbdecfe_read_status(struct dvb_frontend* fe, fe_status_t* status) break; default: pr_info("%s: returned unknown value: %d\n", - __FUNCTION__, result[3]); + __func__, result[3]); return -EIO; } @@ -86,7 +86,7 @@ static int ttusbdecfe_dvbt_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0xff }; - u32 freq = htonl(p->frequency / 1000); + __be32 freq = htonl(p->frequency / 1000); memcpy(&b[4], &freq, sizeof (u32)); state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL); @@ -117,10 +117,10 @@ static int ttusbdecfe_dvbs_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u32 freq; - u32 sym_rate; - u32 band; - u32 lnb_voltage; + __be32 freq; + __be32 sym_rate; + __be32 band; + __be32 lnb_voltage; freq = htonl(p->frequency + (state->hi_band ? LOF_HI : LOF_LO)); diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 36c0e365150..4e3f83e4e48 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -438,7 +438,9 @@ static const struct file_operations usb_dsbr100_fops = { .open = usb_dsbr100_open, .release = usb_dsbr100_close, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/miropcm20-radio.c b/drivers/media/radio/miropcm20-radio.c index 3ae56fef8c9..09fe6f1cdf1 100644 --- a/drivers/media/radio/miropcm20-radio.c +++ b/drivers/media/radio/miropcm20-radio.c @@ -221,7 +221,9 @@ static const struct file_operations pcm20_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = pcm20_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/miropcm20-rds.c b/drivers/media/radio/miropcm20-rds.c index aed11477378..06dfed9ef4c 100644 --- a/drivers/media/radio/miropcm20-rds.c +++ b/drivers/media/radio/miropcm20-rds.c @@ -19,7 +19,7 @@ #include "miropcm20-rds-core.h" static char * text_buffer; -static int rds_users = 0; +static int rds_users; static int rds_f_open(struct inode *in, struct file *fi) diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index f0a67e93d7f..1ec18ed1a73 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -36,7 +36,6 @@ #include <asm/uaccess.h> /* copy to/from user */ #include <linux/videodev2.h> /* kernel radio structs */ #include <media/v4l2-common.h> -#include <asm/semaphore.h> /* Lock for the I/O */ #include <linux/version.h> /* for KERNEL_VERSION MACRO */ #define RADIO_VERSION KERNEL_VERSION(0,0,2) @@ -383,7 +382,9 @@ static const struct file_operations rtrack_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index 9b1f7a99dac..46cdb549eac 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -346,7 +346,9 @@ static const struct file_operations aztech_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c index 34e317ced5a..b14db53ea45 100644 --- a/drivers/media/radio/radio-cadet.c +++ b/drivers/media/radio/radio-cadet.c @@ -69,13 +69,13 @@ static struct v4l2_queryctrl radio_qctrl[] = { static int io=-1; /* default to isapnp activation */ static int radio_nr = -1; -static int users=0; -static int curtuner=0; -static int tunestat=0; -static int sigstrength=0; +static int users; +static int curtuner; +static int tunestat; +static int sigstrength; static wait_queue_head_t read_queue; static struct timer_list readtimer; -static __u8 rdsin=0,rdsout=0,rdsstat=0; +static __u8 rdsin, rdsout, rdsstat; static unsigned char rdsbuf[RDS_BUFFER]; static spinlock_t cadet_io_lock; @@ -563,7 +563,9 @@ static const struct file_operations cadet_fops = { .read = cadet_read, .ioctl = video_ioctl2, .poll = cadet_poll, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; @@ -587,6 +589,8 @@ static struct video_device cadet_radio= .vidioc_s_input = vidioc_s_input, }; +#ifdef CONFIG_PNP + static struct pnp_device_id cadet_pnp_devices[] = { /* ADS Cadet AM/FM Radio Card */ {.id = "MSM0c24", .driver_data = 0}, @@ -621,6 +625,10 @@ static struct pnp_driver cadet_pnp_driver = { .remove = NULL, }; +#else +static struct pnp_driver cadet_pnp_driver; +#endif + static int cadet_probe(void) { static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e}; diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index 99a32313133..de49be97148 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -368,7 +368,9 @@ static const struct file_operations gemtek_pci_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 246422b4926..81f6aeb1cd1 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -397,7 +397,9 @@ static const struct file_operations gemtek_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek }; diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index bc51f4d23a5..bddd3c409aa 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -100,7 +100,9 @@ static const struct file_operations maestro_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 8e184cfc1c9..0133ecf3e04 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -103,7 +103,9 @@ static const struct file_operations maxiradio_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 82aedfc95d4..070802103dc 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -288,7 +288,9 @@ static const struct file_operations rtrack2_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 53e11485737..66e052fd390 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -288,7 +288,9 @@ static const struct file_operations fmi_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index ebc5fbbc38b..b0ccf7cb595 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -29,6 +29,8 @@ static struct mutex lock; #include <linux/version.h> /* for KERNEL_VERSION MACRO */ #define RADIO_VERSION KERNEL_VERSION(0,0,2) +#define AUD_VOL_INDEX 1 + static struct v4l2_queryctrl radio_qctrl[] = { { .id = V4L2_CID_AUDIO_MUTE, @@ -37,13 +39,14 @@ static struct v4l2_queryctrl radio_qctrl[] = { .maximum = 1, .default_value = 1, .type = V4L2_CTRL_TYPE_BOOLEAN, - },{ + }, + [AUD_VOL_INDEX] = { .id = V4L2_CID_AUDIO_VOLUME, .name = "Volume", .minimum = 0, - .maximum = 65535, - .step = 1<<12, - .default_value = 0xff, + .maximum = 15, + .step = 1, + .default_value = 0, .type = V4L2_CTRL_TYPE_INTEGER, } }; @@ -61,7 +64,7 @@ static struct v4l2_queryctrl radio_qctrl[] = { struct fmr2_device { int port; - int curvol; /* 0-65535, if not volume 0 or 65535 */ + int curvol; /* 0-15 */ int mute; int stereo; /* card is producing stereo audio */ unsigned long curfreq; /* freq in kHz */ @@ -176,51 +179,35 @@ static int fmr2_setfreq(struct fmr2_device *dev) /* !!! not tested, in my card this does't work !!! */ static int fmr2_setvolume(struct fmr2_device *dev) { - int i,a,n, port = dev->port; + int vol[16] = { 0x021, 0x084, 0x090, 0x104, + 0x110, 0x204, 0x210, 0x402, + 0x404, 0x408, 0x410, 0x801, + 0x802, 0x804, 0x808, 0x810 }; + int i, a, port = dev->port; + int n = vol[dev->curvol & 0x0f]; - if (dev->card_type != 11) return 1; + if (dev->card_type != 11) + return 1; - switch( (dev->curvol+(1<<11)) >> 12 ) - { - case 0: case 1: n = 0x21; break; - case 2: n = 0x84; break; - case 3: n = 0x90; break; - case 4: n = 0x104; break; - case 5: n = 0x110; break; - case 6: n = 0x204; break; - case 7: n = 0x210; break; - case 8: n = 0x402; break; - case 9: n = 0x404; break; - default: - case 10: n = 0x408; break; - case 11: n = 0x410; break; - case 12: n = 0x801; break; - case 13: n = 0x802; break; - case 14: n = 0x804; break; - case 15: n = 0x808; break; - case 16: n = 0x810; break; - } - for(i=12;--i>=0;) - { + for (i = 12; --i >= 0; ) { a = ((n >> i) & 1) << 6; /* if (a=0) a= 0; else a= 0x40; */ - outb(a|4, port); - wait(4,port); - outb(a|0x24, port); - wait(4,port); - outb(a|4, port); - wait(4,port); + outb(a | 4, port); + wait(4, port); + outb(a | 0x24, port); + wait(4, port); + outb(a | 4, port); + wait(4, port); } - for(i=6;--i>=0;) - { + for (i = 6; --i >= 0; ) { a = ((0x18 >> i) & 1) << 6; - outb(a|4, port); + outb(a | 4, port); wait(4,port); - outb(a|0x24, port); + outb(a | 0x24, port); wait(4,port); outb(a|4, port); wait(4,port); } - wait(4,port); + wait(4, port); outb(0x14, port); return 0; @@ -312,16 +299,10 @@ static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { int i; - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { - if ((fmr2->card_type != 11) - && V4L2_CID_AUDIO_VOLUME) - radio_qctrl[i].step = 65535; if (qc->id && qc->id == radio_qctrl[i].id) { - memcpy(qc, &(radio_qctrl[i]), - sizeof(*qc)); + memcpy(qc, &radio_qctrl[i], sizeof(*qc)); return 0; } } @@ -354,24 +335,13 @@ static int vidioc_s_ctrl(struct file *file, void *priv, switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: fmr2->mute = ctrl->value; - if (fmr2->card_type != 11) { - if (!fmr2->mute) - fmr2->curvol = 65535; - else - fmr2->curvol = 0; - } break; case V4L2_CID_AUDIO_VOLUME: - fmr2->curvol = ctrl->value; - if (fmr2->card_type != 11) { - if (fmr2->curvol) { - fmr2->curvol = 65535; - fmr2->mute = 0; - } else { - fmr2->curvol = 0; - fmr2->mute = 1; - } - } + if (ctrl->value > radio_qctrl[AUD_VOL_INDEX].maximum) + fmr2->curvol = radio_qctrl[AUD_VOL_INDEX].maximum; + else + fmr2->curvol = ctrl->value; + break; default: return -EINVAL; @@ -387,6 +357,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, mutex_lock(&lock); if (fmr2->curvol && !fmr2->mute) { fmr2_setvolume(fmr2); + /* Set frequency and unmute card */ fmr2_setfreq(fmr2); } else fmr2_mute(fmr2->port); @@ -433,7 +404,9 @@ static const struct file_operations fmr2_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; @@ -487,6 +460,11 @@ static int __init fmr2_init(void) fmr2_product_info(&fmr2_unit); mutex_unlock(&lock); debug_print((KERN_DEBUG "card_type %d\n", fmr2_unit.card_type)); + + /* Only card_type == 11 implements volume */ + if (fmr2_unit.card_type != 11) + radio_qctrl[AUD_VOL_INDEX].maximum = 1; + return 0; } diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 649f14d2c01..77354ca6e8e 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -85,6 +85,7 @@ * Oliver Neukum <oliver@neukum.org> * Version 1.0.7 * - usb autosuspend support + * - unplugging fixed * * ToDo: * - add seeking support @@ -97,10 +98,10 @@ /* driver definitions */ #define DRIVER_AUTHOR "Tobias Lorenz <tobias.lorenz@gmx.net>" #define DRIVER_NAME "radio-si470x" -#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 6) +#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 7) #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" #define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers" -#define DRIVER_VERSION "1.0.6" +#define DRIVER_VERSION "1.0.7" /* kernel includes */ @@ -424,6 +425,7 @@ struct si470x_device { /* driver management */ unsigned int users; + unsigned char disconnected; /* Silabs internal registers (0..15) */ unsigned short registers[RADIO_REGISTER_NUM]; @@ -440,6 +442,12 @@ struct si470x_device { /* + * Lock to prevent kfree of data before all users have releases the device. + */ +static DEFINE_MUTEX(open_close_lock); + + +/* * The frequency is set in units of 62.5 Hz when using V4L2_TUNER_CAP_LOW, * 62.5 kHz otherwise. * The tuner is able to have a channel spacing of 50, 100 or 200 kHz. @@ -577,7 +585,7 @@ static int si470x_get_rds_registers(struct si470x_device *radio) usb_rcvintpipe(radio->usbdev, 1), (void *) &buf, sizeof(buf), &size, usb_timeout); if (size != sizeof(buf)) - printk(KERN_WARNING DRIVER_NAME ": si470x_get_rds_register: " + printk(KERN_WARNING DRIVER_NAME ": si470x_get_rds_registers: " "return size differs: %d != %zu\n", size, sizeof(buf)); if (retval < 0) printk(KERN_WARNING DRIVER_NAME ": si470x_get_rds_registers: " @@ -875,6 +883,8 @@ static void si470x_work(struct work_struct *work) struct si470x_device *radio = container_of(work, struct si470x_device, work.work); + if (radio->disconnected) + return; if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) return; @@ -1001,13 +1011,21 @@ static int si470x_fops_open(struct inode *inode, struct file *file) static int si470x_fops_release(struct inode *inode, struct file *file) { struct si470x_device *radio = video_get_drvdata(video_devdata(file)); - int retval; + int retval = 0; if (!radio) return -ENODEV; + mutex_lock(&open_close_lock); radio->users--; if (radio->users == 0) { + if (radio->disconnected) { + video_unregister_device(radio->videodev); + kfree(radio->buffer); + kfree(radio); + goto done; + } + /* stop rds reception */ cancel_delayed_work_sync(&radio->work); @@ -1016,10 +1034,11 @@ static int si470x_fops_release(struct inode *inode, struct file *file) retval = si470x_stop(radio); usb_autopm_put_interface(radio->intf); - return retval; } - return 0; +done: + mutex_unlock(&open_close_lock); + return retval; } @@ -1032,7 +1051,9 @@ static const struct file_operations si470x_fops = { .read = si470x_fops_read, .poll = si470x_fops_poll, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .open = si470x_fops_open, .release = si470x_fops_release, }; @@ -1157,6 +1178,9 @@ static int si470x_vidioc_g_ctrl(struct file *file, void *priv, { struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + if (radio->disconnected) + return -EIO; + switch (ctrl->id) { case V4L2_CID_AUDIO_VOLUME: ctrl->value = radio->registers[SYSCONFIG2] & @@ -1181,6 +1205,9 @@ static int si470x_vidioc_s_ctrl(struct file *file, void *priv, struct si470x_device *radio = video_get_drvdata(video_devdata(file)); int retval; + if (radio->disconnected) + return -EIO; + switch (ctrl->id) { case V4L2_CID_AUDIO_VOLUME: radio->registers[SYSCONFIG2] &= ~SYSCONFIG2_VOLUME; @@ -1243,6 +1270,8 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, struct si470x_device *radio = video_get_drvdata(video_devdata(file)); int retval; + if (radio->disconnected) + return -EIO; if (tuner->index > 0) return -EINVAL; @@ -1299,6 +1328,8 @@ static int si470x_vidioc_s_tuner(struct file *file, void *priv, struct si470x_device *radio = video_get_drvdata(video_devdata(file)); int retval; + if (radio->disconnected) + return -EIO; if (tuner->index > 0) return -EINVAL; @@ -1324,6 +1355,9 @@ static int si470x_vidioc_g_frequency(struct file *file, void *priv, { struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + if (radio->disconnected) + return -EIO; + freq->type = V4L2_TUNER_RADIO; freq->frequency = si470x_get_freq(radio); @@ -1340,6 +1374,8 @@ static int si470x_vidioc_s_frequency(struct file *file, void *priv, struct si470x_device *radio = video_get_drvdata(video_devdata(file)); int retval; + if (radio->disconnected) + return -EIO; if (freq->type != V4L2_TUNER_RADIO) return -EINVAL; @@ -1510,11 +1546,16 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf) { struct si470x_device *radio = usb_get_intfdata(intf); + mutex_lock(&open_close_lock); + radio->disconnected = 1; cancel_delayed_work_sync(&radio->work); usb_set_intfdata(intf, NULL); - video_unregister_device(radio->videodev); - kfree(radio->buffer); - kfree(radio); + if (radio->users == 0) { + video_unregister_device(radio->videodev); + kfree(radio->buffer); + kfree(radio); + } + mutex_unlock(&open_close_lock); } diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index 535ffe8c810..acc32080e9b 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -360,7 +360,9 @@ static const struct file_operations terratec_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index c11981fed82..4ebdfbadeb9 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -340,7 +340,9 @@ static const struct file_operations trust_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 1366326474e..18f2abd7e25 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -35,6 +35,7 @@ #include <linux/init.h> /* Initdata */ #include <linux/ioport.h> /* request_region */ #include <linux/proc_fs.h> /* radio card status report */ +#include <linux/seq_file.h> #include <asm/io.h> /* outb, outb_p */ #include <asm/uaccess.h> /* copy to/from user */ #include <linux/videodev2.h> /* kernel radio structs */ @@ -93,9 +94,6 @@ static int typhoon_setfreq(struct typhoon_device *dev, unsigned long frequency); static void typhoon_mute(struct typhoon_device *dev); static void typhoon_unmute(struct typhoon_device *dev); static int typhoon_setvol(struct typhoon_device *dev, int vol); -#ifdef CONFIG_RADIO_TYPHOON_PROC_FS -static int typhoon_get_info(char *buf, char **start, off_t offset, int len); -#endif static void typhoon_setvol_generic(struct typhoon_device *dev, int vol) { @@ -340,7 +338,9 @@ static const struct file_operations typhoon_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; @@ -366,30 +366,39 @@ static struct video_device typhoon_radio = #ifdef CONFIG_RADIO_TYPHOON_PROC_FS -static int typhoon_get_info(char *buf, char **start, off_t offset, int len) +static int typhoon_proc_show(struct seq_file *m, void *v) { - char *out = buf; - #ifdef MODULE #define MODULEPROCSTRING "Driver loaded as a module" #else #define MODULEPROCSTRING "Driver compiled into kernel" #endif - /* output must be kept under PAGE_SIZE */ - out += sprintf(out, BANNER); - out += sprintf(out, "Load type: " MODULEPROCSTRING "\n\n"); - out += sprintf(out, "frequency = %lu kHz\n", + seq_puts(m, BANNER); + seq_puts(m, "Load type: " MODULEPROCSTRING "\n\n"); + seq_printf(m, "frequency = %lu kHz\n", typhoon_unit.curfreq >> 4); - out += sprintf(out, "volume = %d\n", typhoon_unit.curvol); - out += sprintf(out, "mute = %s\n", typhoon_unit.muted ? + seq_printf(m, "volume = %d\n", typhoon_unit.curvol); + seq_printf(m, "mute = %s\n", typhoon_unit.muted ? "on" : "off"); - out += sprintf(out, "iobase = 0x%x\n", typhoon_unit.iobase); - out += sprintf(out, "mute frequency = %lu kHz\n", + seq_printf(m, "iobase = 0x%x\n", typhoon_unit.iobase); + seq_printf(m, "mute frequency = %lu kHz\n", typhoon_unit.mutefreq >> 4); - return out - buf; + return 0; } +static int typhoon_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, typhoon_proc_show, NULL); +} + +static const struct file_operations typhoon_proc_fops = { + .owner = THIS_MODULE, + .open = typhoon_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif /* CONFIG_RADIO_TYPHOON_PROC_FS */ MODULE_AUTHOR("Dr. Henrik Seidel"); @@ -404,7 +413,7 @@ MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)"); module_param(radio_nr, int, 0); #ifdef MODULE -static unsigned long mutefreq = 0; +static unsigned long mutefreq; module_param(mutefreq, ulong, 0); MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)"); #endif @@ -450,8 +459,7 @@ static int __init typhoon_init(void) typhoon_mute(&typhoon_unit); #ifdef CONFIG_RADIO_TYPHOON_PROC_FS - if (!create_proc_info_entry("driver/radio-typhoon", 0, NULL, - typhoon_get_info)) + if (!proc_create("driver/radio-typhoon", 0, NULL, &typhoon_proc_fops)) printk(KERN_ERR "radio-typhoon: registering /proc/driver/radio-typhoon failed\n"); #endif diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index 203f4373eeb..43773c56c62 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -401,7 +401,9 @@ static const struct file_operations zoltrix_fops = .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 1832966f53f..5ccb0aeca8c 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -1,4 +1,54 @@ # +# Generic video config states +# + +config VIDEO_V4L2 + tristate + depends on VIDEO_DEV && VIDEO_V4L2_COMMON + default VIDEO_DEV && VIDEO_V4L2_COMMON + +config VIDEO_V4L1 + tristate + depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1 + default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1 + +config VIDEOBUF_GEN + tristate + +config VIDEOBUF_DMA_SG + depends on HAS_DMA + select VIDEOBUF_GEN + tristate + +config VIDEOBUF_VMALLOC + select VIDEOBUF_GEN + tristate + +config VIDEOBUF_DVB + tristate + select VIDEOBUF_GEN + select VIDEOBUF_DMA_SG + +config VIDEO_BTCX + tristate + +config VIDEO_IR_I2C + tristate + +config VIDEO_IR + tristate + depends on INPUT + select VIDEO_IR_I2C if I2C + +config VIDEO_TVEEPROM + tristate + depends on I2C + +config VIDEO_TUNER + tristate + depends on MEDIA_TUNER + +# # Multimedia Video device configuration # @@ -270,6 +320,15 @@ config VIDEO_SAA711X To compile this driver as a module, choose M here: the module will be called saa7115. +config VIDEO_SAA717X + tristate "Philips SAA7171/3/4 audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7171/3/4 audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa717x. + config VIDEO_SAA7191 tristate "Philips SAA7191 video decoder" depends on VIDEO_V4L1 && I2C @@ -689,8 +748,12 @@ source "drivers/media/video/cx88/Kconfig" source "drivers/media/video/cx23885/Kconfig" +source "drivers/media/video/au0828/Kconfig" + source "drivers/media/video/ivtv/Kconfig" +source "drivers/media/video/cx18/Kconfig" + config VIDEO_M32R_AR tristate "AR devices" depends on M32R && VIDEO_V4L1 @@ -730,6 +793,14 @@ menuconfig V4L_USB_DRIVERS if V4L_USB_DRIVERS && USB +config USB_VIDEO_CLASS + tristate "USB Video Class (UVC)" + ---help--- + Support for the USB Video Class (UVC). Currently only video + input devices, such as webcams, are supported. + + For more information see: <http://linux-uvc.berlios.de/> + source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" @@ -836,4 +907,49 @@ config USB_STKWEBCAM endif # V4L_USB_DRIVERS +config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA + select VIDEOBUF_DMA_SG + help + SoC Camera is a common API to several cameras, not connecting + over a bus like PCI or USB. For example some i2c camera connected + directly to the data bus of an SoC. + +config SOC_CAMERA_MT9M001 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9M001_PCA9536_SWITCH + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config MT9M001_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9m001" + depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO + help + Select this if your MT9M001 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_MT9V022 + tristate "mt9v022 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9V022_PCA9536_SWITCH + help + This driver supports MT9V022 cameras from Micron + +config MT9V022_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9v022" + depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO + help + Select this if your MT9V022 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config VIDEO_PXA27x + tristate "PXA27x Quick Capture Interface driver" + depends on VIDEO_DEV && PXA27x + select SOC_CAMERA + ---help--- + This is a v4l2 driver for the PXA27x Quick Capture Interface + endif # VIDEO_CAPTURE_DRIVERS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 3f209b32eea..ecbbfaab24d 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -4,7 +4,7 @@ zr36067-objs := zoran_procfs.o zoran_device.o \ zoran_driver.o zoran_card.o -tuner-objs := tuner-core.o tuner-types.o +tuner-objs := tuner-core.o msp3400-objs := msp3400-driver.o msp3400-kthreads.o @@ -38,6 +38,7 @@ obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o obj-$(CONFIG_VIDEO_SAA7111) += saa7111.o obj-$(CONFIG_VIDEO_SAA7114) += saa7114.o obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o +obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o @@ -85,14 +86,6 @@ obj-$(CONFIG_TUNER_3036) += tuner-3036.o obj-$(CONFIG_VIDEO_TUNER) += tuner.o -obj-$(CONFIG_TUNER_XC2028) += tuner-xc2028.o -obj-$(CONFIG_TUNER_SIMPLE) += tuner-simple.o -obj-$(CONFIG_TUNER_MT20XX) += mt20xx.o -obj-$(CONFIG_TUNER_TDA8290) += tda8290.o -obj-$(CONFIG_TUNER_TEA5767) += tea5767.o -obj-$(CONFIG_TUNER_TEA5761) += tea5761.o -obj-$(CONFIG_TUNER_TDA9887) += tda9887.o - obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o @@ -131,9 +124,20 @@ obj-$(CONFIG_USB_VICAM) += usbvideo/ obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/ obj-$(CONFIG_VIDEO_IVTV) += ivtv/ +obj-$(CONFIG_VIDEO_CX18) += cx18/ obj-$(CONFIG_VIDEO_VIVI) += vivi.o obj-$(CONFIG_VIDEO_CX23885) += cx23885/ +obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o +obj-$(CONFIG_SOC_CAMERA) += soc_camera.o +obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o +obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o + +obj-$(CONFIG_VIDEO_AU0828) += au0828/ + +obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends +EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index cbab53fc624..f794f2dbfb3 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -56,7 +56,7 @@ MODULE_LICENSE("GPL"); #define I2C_NAME(x) (x)->name -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -408,7 +408,7 @@ adv7170_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 0d0c554bfdf..8ee07a68f70 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -52,7 +52,7 @@ MODULE_LICENSE("GPL"); #define I2C_NAME(s) (s)->name -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -426,7 +426,7 @@ adv7175_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index c94a4d0f280..8c7d1958856 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -125,8 +125,8 @@ static unsigned char yuv[MAX_AR_FRAME_BYTES]; /* default frequency */ #define DEFAULT_FREQ 50 /* 50 or 75 (MHz) is available as BCLK */ static int freq = DEFAULT_FREQ; /* BCLK: available 50 or 70 (MHz) */ -static int vga = 0; /* default mode(0:QVGA mode, other:VGA mode) */ -static int vga_interlace = 0; /* 0 is normal mode for, else interlace mode */ +static int vga; /* default mode(0:QVGA mode, other:VGA mode) */ +static int vga_interlace; /* 0 is normal mode for, else interlace mode */ module_param(freq, int, 0); module_param(vga, int, 0); module_param(vga_interlace, int, 0); @@ -747,7 +747,9 @@ static const struct file_operations ar_fops = { .release = video_exclusive_release, .read = ar_read, .ioctl = ar_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig new file mode 100644 index 00000000000..52b2491581a --- /dev/null +++ b/drivers/media/video/au0828/Kconfig @@ -0,0 +1,13 @@ + +config VIDEO_AU0828 + tristate "Auvitek AU0828 support" + depends on I2C && INPUT && DVB_CORE && USB + select I2C_ALGOBIT + select VIDEO_TVEEPROM + select DVB_AU8522 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE + ---help--- + This is a video4linux driver for Auvitek's USB device. + + To compile this driver as a module, choose M here: the + module will be called au0828 diff --git a/drivers/media/video/au0828/Makefile b/drivers/media/video/au0828/Makefile new file mode 100644 index 00000000000..cd2c58281b4 --- /dev/null +++ b/drivers/media/video/au0828/Makefile @@ -0,0 +1,9 @@ +au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o + +obj-$(CONFIG_VIDEO_AU0828) += au0828.o + +EXTRA_CFLAGS += -Idrivers/media/common/tuners +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends + +EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c new file mode 100644 index 00000000000..898e12395e7 --- /dev/null +++ b/drivers/media/video/au0828/au0828-cards.c @@ -0,0 +1,199 @@ +/* + * Driver for the Auvitek USB bridge + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "au0828.h" +#include "au0828-cards.h" + +struct au0828_board au0828_boards[] = { + [AU0828_BOARD_UNKNOWN] = { + .name = "Unknown board", + }, + [AU0828_BOARD_HAUPPAUGE_HVR850] = { + .name = "Hauppauge HVR850", + }, + [AU0828_BOARD_HAUPPAUGE_HVR950Q] = { + .name = "Hauppauge HVR950Q", + }, + [AU0828_BOARD_DVICO_FUSIONHDTV7] = { + .name = "DViCO FusionHDTV USB", + }, +}; + +/* Tuner callback function for au0828 boards. Currently only needed + * for HVR1500Q, which has an xc5000 tuner. + */ +int au0828_tuner_callback(void *priv, int command, int arg) +{ + struct au0828_dev *dev = priv; + + dprintk(1, "%s()\n", __func__); + + switch (dev->board) { + case AU0828_BOARD_HAUPPAUGE_HVR850: + case AU0828_BOARD_HAUPPAUGE_HVR950Q: + case AU0828_BOARD_DVICO_FUSIONHDTV7: + if (command == 0) { + /* Tuner Reset Command from xc5000 */ + /* Drive the tuner into reset and out */ + au0828_clear(dev, REG_001, 2); + mdelay(200); + au0828_set(dev, REG_001, 2); + mdelay(50); + return 0; + } else { + printk(KERN_ERR + "%s(): Unknown command.\n", __func__); + return -EINVAL; + } + break; + } + + return 0; /* Should never be here */ +} + +static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */ + case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */ + case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */ + case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */ + case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ + break; + default: + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", __func__, tv.model); + break; + } + + printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", + __func__, tv.model); +} + +void au0828_card_setup(struct au0828_dev *dev) +{ + static u8 eeprom[256]; + + dprintk(1, "%s()\n", __func__); + + if (dev->i2c_rc == 0) { + dev->i2c_client.addr = 0xa0 >> 1; + tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom)); + } + + switch (dev->board) { + case AU0828_BOARD_HAUPPAUGE_HVR850: + case AU0828_BOARD_HAUPPAUGE_HVR950Q: + if (dev->i2c_rc == 0) + hauppauge_eeprom(dev, eeprom+0xa0); + break; + } +} + +/* + * The bridge has between 8 and 12 gpios. + * Regs 1 and 0 deal with output enables. + * Regs 3 and 2 deal with direction. + */ +void au0828_gpio_setup(struct au0828_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + switch (dev->board) { + case AU0828_BOARD_HAUPPAUGE_HVR850: + case AU0828_BOARD_HAUPPAUGE_HVR950Q: + /* GPIO's + * 4 - CS5340 + * 5 - AU8522 Demodulator + * 6 - eeprom W/P + * 9 - XC5000 Tuner + */ + + /* Into reset */ + au0828_write(dev, REG_003, 0x02); + au0828_write(dev, REG_002, 0x88 | 0x20); + au0828_write(dev, REG_001, 0x0); + au0828_write(dev, REG_000, 0x0); + msleep(100); + + /* Out of reset */ + au0828_write(dev, REG_003, 0x02); + au0828_write(dev, REG_001, 0x02); + au0828_write(dev, REG_002, 0x88 | 0x20); + au0828_write(dev, REG_000, 0x88 | 0x20 | 0x40); + msleep(250); + break; + case AU0828_BOARD_DVICO_FUSIONHDTV7: + /* GPIO's + * 6 - ? + * 8 - AU8522 Demodulator + * 9 - XC5000 Tuner + */ + + /* Into reset */ + au0828_write(dev, REG_003, 0x02); + au0828_write(dev, REG_002, 0xa0); + au0828_write(dev, REG_001, 0x0); + au0828_write(dev, REG_000, 0x0); + msleep(100); + + /* Out of reset */ + au0828_write(dev, REG_003, 0x02); + au0828_write(dev, REG_002, 0xa0); + au0828_write(dev, REG_001, 0x02); + au0828_write(dev, REG_000, 0xa0); + msleep(250); + break; + } +} + +/* table of devices that work with this driver */ +struct usb_device_id au0828_usb_id_table [] = { + { USB_DEVICE(0x2040, 0x7200), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7240), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 }, + { USB_DEVICE(0x0fe9, 0xd620), + .driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 }, + { USB_DEVICE(0x2040, 0x7210), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7217), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721b), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721f), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7280), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x0fd9, 0x0008), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { }, +}; + +MODULE_DEVICE_TABLE(usb, au0828_usb_id_table); diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h new file mode 100644 index 00000000000..e26f54a961d --- /dev/null +++ b/drivers/media/video/au0828/au0828-cards.h @@ -0,0 +1,25 @@ +/* + * Driver for the Auvitek USB bridge + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define AU0828_BOARD_UNKNOWN 0 +#define AU0828_BOARD_HAUPPAUGE_HVR950Q 1 +#define AU0828_BOARD_HAUPPAUGE_HVR850 2 +#define AU0828_BOARD_DVICO_FUSIONHDTV7 3 diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c new file mode 100644 index 00000000000..54bfc0f0529 --- /dev/null +++ b/drivers/media/video/au0828/au0828-core.c @@ -0,0 +1,256 @@ +/* + * Driver for the Auvitek USB bridge + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/mutex.h> + +#include "au0828.h" + +/* + * 1 = General debug messages + * 2 = USB handling + * 4 = I2C related + * 8 = Bridge related + */ +int au0828_debug; +module_param_named(debug, au0828_debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +#define _AU0828_BULKPIPE 0x03 +#define _BULKPIPESIZE 0xffff + +static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, + u16 index, unsigned char *cp, u16 size); +static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, + u16 index, unsigned char *cp, u16 size); + +/* USB Direction */ +#define CMD_REQUEST_IN 0x00 +#define CMD_REQUEST_OUT 0x01 + +u32 au0828_readreg(struct au0828_dev *dev, u16 reg) +{ + recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, dev->ctrlmsg, 1); + dprintk(8, "%s(0x%x) = 0x%x\n", __func__, reg, dev->ctrlmsg[0]); + return dev->ctrlmsg[0]; +} + +u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val) +{ + dprintk(8, "%s(0x%x, 0x%x)\n", __func__, reg, val); + return send_control_msg(dev, CMD_REQUEST_OUT, val, reg, + dev->ctrlmsg, 0); +} + +static void cmd_msg_dump(struct au0828_dev *dev) +{ + int i; + + for (i = 0; i < sizeof(dev->ctrlmsg); i += 16) + dprintk(2, "%s() %02x %02x %02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + __func__, + dev->ctrlmsg[i+0], dev->ctrlmsg[i+1], + dev->ctrlmsg[i+2], dev->ctrlmsg[i+3], + dev->ctrlmsg[i+4], dev->ctrlmsg[i+5], + dev->ctrlmsg[i+6], dev->ctrlmsg[i+7], + dev->ctrlmsg[i+8], dev->ctrlmsg[i+9], + dev->ctrlmsg[i+10], dev->ctrlmsg[i+11], + dev->ctrlmsg[i+12], dev->ctrlmsg[i+13], + dev->ctrlmsg[i+14], dev->ctrlmsg[i+15]); +} + +static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, + u16 index, unsigned char *cp, u16 size) +{ + int status = -ENODEV; + mutex_lock(&dev->mutex); + if (dev->usbdev) { + + /* cp must be memory that has been allocated by kmalloc */ + status = usb_control_msg(dev->usbdev, + usb_sndctrlpipe(dev->usbdev, 0), + request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, + cp, size, 1000); + + status = min(status, 0); + + if (status < 0) { + printk(KERN_ERR "%s() Failed sending control message, error %d.\n", + __func__, status); + } + + } + mutex_unlock(&dev->mutex); + return status; +} + +static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, + u16 index, unsigned char *cp, u16 size) +{ + int status = -ENODEV; + mutex_lock(&dev->mutex); + if (dev->usbdev) { + + memset(dev->ctrlmsg, 0, sizeof(dev->ctrlmsg)); + + /* cp must be memory that has been allocated by kmalloc */ + status = usb_control_msg(dev->usbdev, + usb_rcvctrlpipe(dev->usbdev, 0), + request, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, + cp, size, 1000); + + status = min(status, 0); + + if (status < 0) { + printk(KERN_ERR "%s() Failed receiving control message, error %d.\n", + __func__, status); + } else + cmd_msg_dump(dev); + } + mutex_unlock(&dev->mutex); + return status; +} + +static void au0828_usb_disconnect(struct usb_interface *interface) +{ + struct au0828_dev *dev = usb_get_intfdata(interface); + + dprintk(1, "%s()\n", __func__); + + /* Digital TV */ + au0828_dvb_unregister(dev); + + /* I2C */ + au0828_i2c_unregister(dev); + + usb_set_intfdata(interface, NULL); + + mutex_lock(&dev->mutex); + dev->usbdev = NULL; + mutex_unlock(&dev->mutex); + + kfree(dev); + +} + +static int au0828_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + int ifnum; + struct au0828_dev *dev; + struct usb_device *usbdev = interface_to_usbdev(interface); + + ifnum = interface->altsetting->desc.bInterfaceNumber; + + if (ifnum != 0) + return -ENODEV; + + dprintk(1, "%s() vendor id 0x%x device id 0x%x ifnum:%d\n", __func__, + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct), + ifnum); + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + printk(KERN_ERR "%s() Unable to allocate memory\n", __func__); + return -ENOMEM; + } + + mutex_init(&dev->mutex); + mutex_init(&dev->dvb.lock); + dev->usbdev = usbdev; + dev->board = id->driver_info; + + usb_set_intfdata(interface, dev); + + /* Power Up the bridge */ + au0828_write(dev, REG_600, 1 << 4); + + /* Bring up the GPIO's and supporting devices */ + au0828_gpio_setup(dev); + + /* I2C */ + au0828_i2c_register(dev); + + /* Setup */ + au0828_card_setup(dev); + + /* Digital TV */ + au0828_dvb_register(dev); + + printk(KERN_INFO "Registered device AU0828 [%s]\n", + au0828_boards[dev->board].name == NULL ? "Unset" : + au0828_boards[dev->board].name); + + return 0; +} + +static struct usb_driver au0828_usb_driver = { + .name = DRIVER_NAME, + .probe = au0828_usb_probe, + .disconnect = au0828_usb_disconnect, + .id_table = au0828_usb_id_table, +}; + +static int __init au0828_init(void) +{ + int ret; + + if (au0828_debug & 1) + printk(KERN_INFO "%s() Debugging is enabled\n", __func__); + + if (au0828_debug & 2) + printk(KERN_INFO "%s() USB Debugging is enabled\n", __func__); + + if (au0828_debug & 4) + printk(KERN_INFO "%s() I2C Debugging is enabled\n", __func__); + + if (au0828_debug & 8) + printk(KERN_INFO "%s() Bridge Debugging is enabled\n", + __func__); + + printk(KERN_INFO "au0828 driver loaded\n"); + + ret = usb_register(&au0828_usb_driver); + if (ret) + printk(KERN_ERR "usb_register failed, error = %d\n", ret); + + return ret; +} + +static void __exit au0828_exit(void) +{ + usb_deregister(&au0828_usb_driver); +} + +module_init(au0828_init); +module_exit(au0828_exit); + +MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products"); +MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c new file mode 100644 index 00000000000..c6d47059038 --- /dev/null +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -0,0 +1,365 @@ +/* + * Driver for the Auvitek USB bridge + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/suspend.h> +#include <media/v4l2-common.h> + +#include "au0828.h" +#include "au8522.h" +#include "xc5000.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define _AU0828_BULKPIPE 0x83 +#define _BULKPIPESIZE 0xe522 + +static struct au8522_config hauppauge_hvr950q_config = { + .demod_address = 0x8e >> 1, + .status_mode = AU8522_DEMODLOCKING, +}; + +static struct xc5000_config hauppauge_hvr950q_tunerconfig = { + .i2c_address = 0x61, + .if_khz = 6000, + .tuner_callback = au0828_tuner_callback +}; + +/*-------------------------------------------------------------------*/ +static void urb_completion(struct urb *purb) +{ + u8 *ptr; + struct au0828_dev *dev = purb->context; + int ptype = usb_pipetype(purb->pipe); + + dprintk(2, "%s()\n", __func__); + + if (!dev) + return; + + if (dev->urb_streaming == 0) + return; + + if (ptype != PIPE_BULK) { + printk(KERN_ERR "%s() Unsupported URB type %d\n", + __func__, ptype); + return; + } + + ptr = (u8 *)purb->transfer_buffer; + + /* Feed the transport payload into the kernel demux */ + dvb_dmx_swfilter_packets(&dev->dvb.demux, + purb->transfer_buffer, purb->actual_length / 188); + + /* Clean the buffer before we requeue */ + memset(purb->transfer_buffer, 0, URB_BUFSIZE); + + /* Requeue URB */ + usb_submit_urb(purb, GFP_ATOMIC); +} + +static int stop_urb_transfer(struct au0828_dev *dev) +{ + int i; + + dprintk(2, "%s()\n", __func__); + + for (i = 0; i < URB_COUNT; i++) { + usb_kill_urb(dev->urbs[i]); + kfree(dev->urbs[i]->transfer_buffer); + usb_free_urb(dev->urbs[i]); + } + + dev->urb_streaming = 0; + + return 0; +} + +static int start_urb_transfer(struct au0828_dev *dev) +{ + struct urb *purb; + int i, ret = -ENOMEM; + + dprintk(2, "%s()\n", __func__); + + if (dev->urb_streaming) { + dprintk(2, "%s: iso xfer already running!\n", __func__); + return 0; + } + + for (i = 0; i < URB_COUNT; i++) { + + dev->urbs[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->urbs[i]) + goto err; + + purb = dev->urbs[i]; + + purb->transfer_buffer = kzalloc(URB_BUFSIZE, GFP_KERNEL); + if (!purb->transfer_buffer) { + usb_free_urb(purb); + dev->urbs[i] = NULL; + goto err; + } + + purb->status = -EINPROGRESS; + usb_fill_bulk_urb(purb, + dev->usbdev, + usb_rcvbulkpipe(dev->usbdev, _AU0828_BULKPIPE), + purb->transfer_buffer, + URB_BUFSIZE, + urb_completion, + dev); + + } + + for (i = 0; i < URB_COUNT; i++) { + ret = usb_submit_urb(dev->urbs[i], GFP_ATOMIC); + if (ret != 0) { + stop_urb_transfer(dev); + printk(KERN_ERR "%s: failed urb submission, " + "err = %d\n", __func__, ret); + return ret; + } + } + + dev->urb_streaming = 1; + ret = 0; + +err: + return ret; +} + +static int au0828_dvb_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct au0828_dev *dev = (struct au0828_dev *) demux->priv; + struct au0828_dvb *dvb = &dev->dvb; + int ret = 0; + + dprintk(1, "%s()\n", __func__); + + if (!demux->dmx.frontend) + return -EINVAL; + + if (dvb) { + mutex_lock(&dvb->lock); + if (dvb->feeding++ == 0) { + /* Start transport */ + au0828_write(dev, 0x608, 0x90); + au0828_write(dev, 0x609, 0x72); + au0828_write(dev, 0x60a, 0x71); + au0828_write(dev, 0x60b, 0x01); + ret = start_urb_transfer(dev); + } + mutex_unlock(&dvb->lock); + } + + return ret; +} + +static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct au0828_dev *dev = (struct au0828_dev *) demux->priv; + struct au0828_dvb *dvb = &dev->dvb; + int ret = 0; + + dprintk(1, "%s()\n", __func__); + + if (dvb) { + mutex_lock(&dvb->lock); + if (--dvb->feeding == 0) { + /* Stop transport */ + au0828_write(dev, 0x608, 0x00); + au0828_write(dev, 0x609, 0x00); + au0828_write(dev, 0x60a, 0x00); + au0828_write(dev, 0x60b, 0x00); + ret = stop_urb_transfer(dev); + } + mutex_unlock(&dvb->lock); + } + + return ret; +} + +static int dvb_register(struct au0828_dev *dev) +{ + struct au0828_dvb *dvb = &dev->dvb; + int result; + + dprintk(1, "%s()\n", __func__); + + /* register adapter */ + result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE, + &dev->usbdev->dev, adapter_nr); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_adapter; + } + dvb->adapter.priv = dev; + + /* register frontend */ + result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_frontend failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_frontend; + } + + /* register demux stuff */ + dvb->demux.dmx.capabilities = + DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = dev; + dvb->demux.filternum = 256; + dvb->demux.feednum = 256; + dvb->demux.start_feed = au0828_dvb_start_feed; + dvb->demux.stop_feed = au0828_dvb_stop_feed; + result = dvb_dmx_init(&dvb->demux); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmx; + } + + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = &dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmxdev; + } + + dvb->fe_hw.source = DMX_FRONTEND_0; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_hw; + } + + dvb->fe_mem.source = DMX_MEMORY_FE; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_mem; + } + + result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_fe_conn; + } + + /* register network adapter */ + dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); + return 0; + +fail_fe_conn: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); +fail_fe_mem: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); +fail_fe_hw: + dvb_dmxdev_release(&dvb->dmxdev); +fail_dmxdev: + dvb_dmx_release(&dvb->demux); +fail_dmx: + dvb_unregister_frontend(dvb->frontend); +fail_frontend: + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); +fail_adapter: + return result; +} + +void au0828_dvb_unregister(struct au0828_dev *dev) +{ + struct au0828_dvb *dvb = &dev->dvb; + + dprintk(1, "%s()\n", __func__); + + if (dvb->frontend == NULL) + return; + + dvb_net_release(&dvb->net); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(&dvb->demux); + dvb_unregister_frontend(dvb->frontend); + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); +} + +/* All the DVB attach calls go here, this function get's modified + * for each new card. No other function in this file needs + * to change. + */ +int au0828_dvb_register(struct au0828_dev *dev) +{ + struct au0828_dvb *dvb = &dev->dvb; + int ret; + + dprintk(1, "%s()\n", __func__); + + /* init frontend */ + switch (dev->board) { + case AU0828_BOARD_HAUPPAUGE_HVR850: + case AU0828_BOARD_HAUPPAUGE_HVR950Q: + case AU0828_BOARD_DVICO_FUSIONHDTV7: + dvb->frontend = dvb_attach(au8522_attach, + &hauppauge_hvr950q_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) + dvb_attach(xc5000_attach, dvb->frontend, + &dev->i2c_adap, + &hauppauge_hvr950q_tunerconfig, dev); + break; + default: + printk(KERN_WARNING "The frontend of your DVB/ATSC card " + "isn't supported yet\n"); + break; + } + if (NULL == dvb->frontend) { + printk(KERN_ERR "%s() Frontend initialization failed\n", + __func__); + return -1; + } + + /* register everything */ + ret = dvb_register(dev); + if (ret < 0) { + if (dvb->frontend->ops.release) + dvb->frontend->ops.release(dvb->frontend); + return ret; + } + + return 0; +} diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/video/au0828/au0828-i2c.c new file mode 100644 index 00000000000..741a4937b05 --- /dev/null +++ b/drivers/media/video/au0828/au0828-i2c.c @@ -0,0 +1,381 @@ +/* + * Driver for the Auvitek AU0828 USB bridge + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include "au0828.h" + +#include <media/v4l2-common.h> + +static int i2c_scan; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); + +#define I2C_WAIT_DELAY 512 +#define I2C_WAIT_RETRY 64 + +static inline int i2c_slave_did_write_ack(struct i2c_adapter *i2c_adap) +{ + struct au0828_dev *dev = i2c_adap->algo_data; + return au0828_read(dev, REG_201) & 0x08 ? 0 : 1; +} + +static inline int i2c_slave_did_read_ack(struct i2c_adapter *i2c_adap) +{ + struct au0828_dev *dev = i2c_adap->algo_data; + return au0828_read(dev, REG_201) & 0x02 ? 0 : 1; +} + +static int i2c_wait_read_ack(struct i2c_adapter *i2c_adap) +{ + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + if (!i2c_slave_did_read_ack(i2c_adap)) + break; + udelay(I2C_WAIT_DELAY); + } + + if (I2C_WAIT_RETRY == count) + return 0; + + return 1; +} + +static inline int i2c_is_read_busy(struct i2c_adapter *i2c_adap) +{ + struct au0828_dev *dev = i2c_adap->algo_data; + return au0828_read(dev, REG_201) & 0x01 ? 0 : 1; +} + +static int i2c_wait_read_done(struct i2c_adapter *i2c_adap) +{ + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + if (!i2c_is_read_busy(i2c_adap)) + break; + udelay(I2C_WAIT_DELAY); + } + + if (I2C_WAIT_RETRY == count) + return 0; + + return 1; +} + +static inline int i2c_is_write_done(struct i2c_adapter *i2c_adap) +{ + struct au0828_dev *dev = i2c_adap->algo_data; + return au0828_read(dev, REG_201) & 0x04 ? 1 : 0; +} + +static int i2c_wait_write_done(struct i2c_adapter *i2c_adap) +{ + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + if (i2c_is_write_done(i2c_adap)) + break; + udelay(I2C_WAIT_DELAY); + } + + if (I2C_WAIT_RETRY == count) + return 0; + + return 1; +} + +static inline int i2c_is_busy(struct i2c_adapter *i2c_adap) +{ + struct au0828_dev *dev = i2c_adap->algo_data; + return au0828_read(dev, REG_201) & 0x10 ? 1 : 0; +} + +static int i2c_wait_done(struct i2c_adapter *i2c_adap) +{ + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + if (!i2c_is_busy(i2c_adap)) + break; + udelay(I2C_WAIT_DELAY); + } + + if (I2C_WAIT_RETRY == count) + return 0; + + return 1; +} + +/* FIXME: Implement join handling correctly */ +static int i2c_sendbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined_rlen) +{ + int i, strobe = 0; + struct au0828_dev *dev = i2c_adap->algo_data; + + dprintk(4, "%s()\n", __func__); + + au0828_write(dev, REG_2FF, 0x01); + au0828_write(dev, REG_202, 0x07); + + /* Hardware needs 8 bit addresses */ + au0828_write(dev, REG_203, msg->addr << 1); + + dprintk(4, "SEND: %02x\n", msg->addr); + + for (i = 0; i < msg->len;) { + + dprintk(4, " %02x\n", msg->buf[i]); + + au0828_write(dev, REG_205, msg->buf[i]); + + strobe++; + i++; + + if ((strobe >= 4) || (i >= msg->len)) { + + /* Strobe the byte into the bus */ + if (i < msg->len) + au0828_write(dev, REG_200, 0x41); + else + au0828_write(dev, REG_200, 0x01); + + /* Reset strobe trigger */ + strobe = 0; + + if (!i2c_wait_write_done(i2c_adap)) + return -EIO; + + } + + } + if (!i2c_wait_done(i2c_adap)) + return -EIO; + + dprintk(4, "\n"); + + return msg->len; +} + +/* FIXME: Implement join handling correctly */ +static int i2c_readbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined) +{ + struct au0828_dev *dev = i2c_adap->algo_data; + int i; + + dprintk(4, "%s()\n", __func__); + + au0828_write(dev, REG_2FF, 0x01); + au0828_write(dev, REG_202, 0x07); + + /* Hardware needs 8 bit addresses */ + au0828_write(dev, REG_203, msg->addr << 1); + + dprintk(4, " RECV:\n"); + + /* Deal with i2c_scan */ + if (msg->len == 0) { + au0828_write(dev, REG_200, 0x20); + if (i2c_wait_read_ack(i2c_adap)) + return -EIO; + return 0; + } + + for (i = 0; i < msg->len;) { + + i++; + + if (i < msg->len) + au0828_write(dev, REG_200, 0x60); + else + au0828_write(dev, REG_200, 0x20); + + if (!i2c_wait_read_done(i2c_adap)) + return -EIO; + + msg->buf[i-1] = au0828_read(dev, REG_209) & 0xff; + + dprintk(4, " %02x\n", msg->buf[i-1]); + } + if (!i2c_wait_done(i2c_adap)) + return -EIO; + + dprintk(4, "\n"); + + return msg->len; +} + +static int i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + int i, retval = 0; + + dprintk(4, "%s(num = %d)\n", __func__, num); + + for (i = 0; i < num; i++) { + dprintk(4, "%s(num = %d) addr = 0x%02x len = 0x%x\n", + __func__, num, msgs[i].addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* read */ + retval = i2c_readbytes(i2c_adap, &msgs[i], 0); + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], + msgs[i + 1].len); + if (retval < 0) + goto err; + i++; + retval = i2c_readbytes(i2c_adap, &msgs[i], 1); + } else { + /* write */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], 0); + } + if (retval < 0) + goto err; + } + return num; + +err: + return retval; +} + +static int attach_inform(struct i2c_client *client) +{ + dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", + client->driver->driver.name, client->addr, client->name); + + if (!client->driver->command) + return 0; + + return 0; +} + +static int detach_inform(struct i2c_client *client) +{ + dprintk(1, "i2c detach [client=%s]\n", client->name); + + return 0; +} + +void au0828_call_i2c_clients(struct au0828_dev *dev, + unsigned int cmd, void *arg) +{ + if (dev->i2c_rc != 0) + return; + + i2c_clients_command(&dev->i2c_adap, cmd, arg); +} + +static u32 au0828_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; +} + +static struct i2c_algorithm au0828_i2c_algo_template = { + .master_xfer = i2c_xfer, + .functionality = au0828_functionality, +}; + +/* ----------------------------------------------------------------------- */ + +static struct i2c_adapter au0828_i2c_adap_template = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .id = I2C_HW_B_AU0828, + .algo = &au0828_i2c_algo_template, + .class = I2C_CLASS_TV_ANALOG, + .client_register = attach_inform, + .client_unregister = detach_inform, +}; + +static struct i2c_client au0828_i2c_client_template = { + .name = "au0828 internal", +}; + +static char *i2c_devs[128] = { + [0x8e >> 1] = "au8522", + [0xa0 >> 1] = "eeprom", + [0xc2 >> 1] = "tuner/xc5000", +}; + +static void do_i2c_scan(char *name, struct i2c_client *c) +{ + unsigned char buf; + int i, rc; + + for (i = 0; i < 128; i++) { + c->addr = i; + rc = i2c_master_recv(c, &buf, 0); + if (rc < 0) + continue; + printk(KERN_INFO "%s: i2c scan: found device @ 0x%x [%s]\n", + name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +/* init + register i2c algo-bit adapter */ +int au0828_i2c_register(struct au0828_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + memcpy(&dev->i2c_adap, &au0828_i2c_adap_template, + sizeof(dev->i2c_adap)); + memcpy(&dev->i2c_algo, &au0828_i2c_algo_template, + sizeof(dev->i2c_algo)); + memcpy(&dev->i2c_client, &au0828_i2c_client_template, + sizeof(dev->i2c_client)); + + dev->i2c_adap.dev.parent = &dev->usbdev->dev; + + strlcpy(dev->i2c_adap.name, DRIVER_NAME, + sizeof(dev->i2c_adap.name)); + + dev->i2c_algo.data = dev; + dev->i2c_adap.algo_data = dev; + i2c_set_adapdata(&dev->i2c_adap, dev); + i2c_add_adapter(&dev->i2c_adap); + + dev->i2c_client.adapter = &dev->i2c_adap; + + if (0 == dev->i2c_rc) { + printk(KERN_INFO "%s: i2c bus registered\n", DRIVER_NAME); + if (i2c_scan) + do_i2c_scan(DRIVER_NAME, &dev->i2c_client); + } else + printk(KERN_INFO "%s: i2c bus register FAILED\n", DRIVER_NAME); + + return dev->i2c_rc; +} + +int au0828_i2c_unregister(struct au0828_dev *dev) +{ + i2c_del_adapter(&dev->i2c_adap); + return 0; +} + diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/video/au0828/au0828-reg.h new file mode 100644 index 00000000000..39827550891 --- /dev/null +++ b/drivers/media/video/au0828/au0828-reg.h @@ -0,0 +1,38 @@ +/* + * Driver for the Auvitek USB bridge + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* We'll start to rename these registers once we have a better + * understanding of their meaning. + */ +#define REG_000 0x000 +#define REG_001 0x001 +#define REG_002 0x002 +#define REG_003 0x003 + +#define REG_200 0x200 +#define REG_201 0x201 +#define REG_202 0x202 +#define REG_203 0x203 +#define REG_205 0x205 +#define REG_209 0x209 +#define REG_2FF 0x2ff + +#define REG_600 0x600 diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h new file mode 100644 index 00000000000..7beb571798e --- /dev/null +++ b/drivers/media/video/au0828/au0828.h @@ -0,0 +1,124 @@ +/* + * Driver for the Auvitek AU0828 USB bridge + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <media/tveeprom.h> + +/* DVB */ +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" + +#include "au0828-reg.h" +#include "au0828-cards.h" + +#define DRIVER_NAME "au0828" +#define URB_COUNT 16 +#define URB_BUFSIZE (0xe522) + +struct au0828_board { + char *name; +}; + +struct au0828_dvb { + struct mutex lock; + struct dvb_adapter adapter; + struct dvb_frontend *frontend; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net net; + int feeding; +}; + +struct au0828_dev { + struct mutex mutex; + struct usb_device *usbdev; + int board; + u8 ctrlmsg[64]; + + /* I2C */ + struct i2c_adapter i2c_adap; + struct i2c_algo_bit_data i2c_algo; + struct i2c_client i2c_client; + u32 i2c_rc; + + /* Digital */ + struct au0828_dvb dvb; + + /* USB / URB Related */ + int urb_streaming; + struct urb *urbs[URB_COUNT]; + +}; + +struct au0828_buff { + struct au0828_dev *dev; + struct urb *purb; + struct list_head buff_list; +}; + +/* ----------------------------------------------------------- */ +#define au0828_read(dev, reg) au0828_readreg(dev, reg) +#define au0828_write(dev, reg, value) au0828_writereg(dev, reg, value) +#define au0828_andor(dev, reg, mask, value) \ + au0828_writereg(dev, reg, \ + (au0828_readreg(dev, reg) & ~(mask)) | ((value) & (mask))) + +#define au0828_set(dev, reg, bit) au0828_andor(dev, (reg), (bit), (bit)) +#define au0828_clear(dev, reg, bit) au0828_andor(dev, (reg), (bit), 0) + +/* ----------------------------------------------------------- */ +/* au0828-core.c */ +extern u32 au0828_read(struct au0828_dev *dev, u16 reg); +extern u32 au0828_write(struct au0828_dev *dev, u16 reg, u32 val); +extern int au0828_debug; + +/* ----------------------------------------------------------- */ +/* au0828-cards.c */ +extern struct au0828_board au0828_boards[]; +extern struct usb_device_id au0828_usb_id_table[]; +extern void au0828_gpio_setup(struct au0828_dev *dev); +extern int au0828_tuner_callback(void *priv, int command, int arg); +extern void au0828_card_setup(struct au0828_dev *dev); + +/* ----------------------------------------------------------- */ +/* au0828-i2c.c */ +extern int au0828_i2c_register(struct au0828_dev *dev); +extern int au0828_i2c_unregister(struct au0828_dev *dev); +extern void au0828_call_i2c_clients(struct au0828_dev *dev, + unsigned int cmd, void *arg); + +/* ----------------------------------------------------------- */ +/* au0828-dvb.c */ +extern int au0828_dvb_register(struct au0828_dev *dev); +extern void au0828_dvb_unregister(struct au0828_dev *dev); + +#define dprintk(level, fmt, arg...)\ + do { if (au0828_debug & level)\ + printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\ + } while (0) diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index 12d1b9248be..8bfd5c75cb3 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -57,7 +57,7 @@ MODULE_LICENSE("GPL"); #define I2C_NAME(s) (s)->name -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -524,7 +524,7 @@ bt819_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index e1028a76c04..98ee2d8feb3 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -56,7 +56,7 @@ MODULE_LICENSE("GPL"); #define I2C_NAME(s) (s)->name -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -311,7 +311,7 @@ bt856_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig index cfc822bb502..24a34fc1f2b 100644 --- a/drivers/media/video/bt8xx/Kconfig +++ b/drivers/media/video/bt8xx/Kconfig @@ -1,6 +1,7 @@ config VIDEO_BT848 tristate "BT848 Video For Linux" depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT + depends on HOTPLUG # due to FW_LOADER select I2C_ALGOBIT select FW_LOADER select VIDEO_BTCX diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile index 924d216d957..e415f6fc447 100644 --- a/drivers/media/video/bt8xx/Makefile +++ b/drivers/media/video/bt8xx/Makefile @@ -9,4 +9,5 @@ bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ obj-$(CONFIG_VIDEO_BT848) += bttv.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core diff --git a/drivers/media/video/bt8xx/bt832.c b/drivers/media/video/bt8xx/bt832.c index a5187613788..f92f06dec0d 100644 --- a/drivers/media/video/bt8xx/bt832.c +++ b/drivers/media/video/bt8xx/bt832.c @@ -97,6 +97,11 @@ int bt832_init(struct i2c_client *i2c_client_s) int rc; buf=kmalloc(65,GFP_KERNEL); + if (!buf) { + v4l_err(&t->client, + "Unable to allocate memory. Detaching.\n"); + return 0; + } bt832_hexdump(i2c_client_s,buf); if(buf[0x40] != 0x31) { @@ -211,7 +216,12 @@ bt832_command(struct i2c_client *client, unsigned int cmd, void *arg) switch (cmd) { case BT832_HEXDUMP: { unsigned char *buf; - buf=kmalloc(65,GFP_KERNEL); + buf = kmalloc(65, GFP_KERNEL); + if (!buf) { + v4l_err(&t->client, + "Unable to allocate memory\n"); + break; + } bt832_hexdump(&t->client,buf); kfree(buf); } diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 7374c02dd18..8ef0424c26c 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -34,6 +34,7 @@ #include <linux/firmware.h> #include <net/checksum.h> +#include <asm/unaligned.h> #include <asm/io.h> #include "bttvp.h" @@ -71,6 +72,8 @@ static void kodicom4400r_init(struct bttv *btv); static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); +static void geovision_muxsel(struct bttv *btv, unsigned int input); + static int terratec_active_radio_upgrade(struct bttv *btv); static int tea5757_read(struct bttv *btv); static int tea5757_write(struct bttv *btv, int value); @@ -301,6 +304,7 @@ static struct CARD { { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, + { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, { 0, -1, NULL } }; @@ -576,6 +580,8 @@ struct tvcard bttv_tvcards[] = { .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_WINVIEW_601] = { .name = "Leadtek WinView 601", @@ -2322,7 +2328,7 @@ struct tvcard bttv_tvcards[] = { .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 0 }, - .tuner_type = TUNER_PHILIPS_ATSC, + .tuner_type = TUNER_PHILIPS_FCV1236D, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_dvb = 1, @@ -2961,7 +2967,7 @@ struct tvcard bttv_tvcards[] = { [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { .name = "DViCO FusionHDTV 2", .tuner = 0, - .tuner_type = TUNER_PHILIPS_ATSC, /* FCV1236D */ + .tuner_type = TUNER_PHILIPS_FCV1236D, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .video_inputs = 3, @@ -2992,6 +2998,45 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, + [BTTV_BOARD_GEOVISION_GV600] = { + /* emhn@usb.ve */ + .name = "Geovision GV-600", + .video_inputs = 16, + .audio_inputs = 0, + .tuner = UNSET, + .svhs = UNSET, + .gpiomask = 0x0, + .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2 }, + .muxsel_hook = geovision_muxsel, + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_KOZUMI_KTV_01C] = { + /* Mauro Lacy <mauro@lacy.com.ar> + * Based on MagicTV and Conceptronic CONTVFMi */ + + .name = "Kozumi KTV-01C", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = { 2, 3, 1, 1 }, + .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ + .gpiomute = 3, /* CONTVFMi */ + .needs_tvaudio = 0, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + }, }; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); @@ -3331,6 +3376,13 @@ static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) gpio_bits( 3<<9, inmux<<9 ); } +static void geovision_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int inmux = input % 16; + gpio_inout(0xf, 0xf); + gpio_bits(0xf, inmux); +} + /* ----------------------------------------------------------------------- */ static void bttv_reset_audio(struct bttv *btv) @@ -3807,7 +3859,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) ee += i; /* found a valid descriptor */ - type = be16_to_cpup((u16*)(ee+4)); + type = get_unaligned_be16((__be16 *)(ee+4)); switch(type) { /* 848 based */ @@ -3867,7 +3919,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) btv->c.nr, type); break; } - serial = be32_to_cpup((u32*)(ee+6)); + serial = get_unaligned_be32((__be32 *)(ee+6)); } printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n", diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index a080c149cc6..0165aac533b 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1990,7 +1990,7 @@ static int bttv_g_frequency(struct file *file, void *priv, if (0 != err) return err; - f->type = V4L2_TUNER_ANALOG_TV; + f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; f->frequency = btv->freq; return 0; @@ -2009,7 +2009,8 @@ static int bttv_s_frequency(struct file *file, void *priv, if (unlikely(f->tuner != 0)) return -EINVAL; - if (unlikely(f->type != V4L2_TUNER_ANALOG_TV)) + if (unlikely(f->type != (btv->radio_user + ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV))) return -EINVAL; mutex_lock(&btv->lock); btv->freq = f->frequency; @@ -2371,7 +2372,7 @@ static int setup_window(struct bttv_fh *fh, struct bttv *btv, if (check_btres(fh, RESOURCE_OVERLAY)) { struct bttv_buffer *new; - new = videobuf_pci_alloc(sizeof(*new)); + new = videobuf_sg_alloc(sizeof(*new)); new->crop = btv->crop[!!fh->do_crop].rect; bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); retval = bttv_switch_overlay(btv,fh,new); @@ -2612,7 +2613,7 @@ static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) struct bttv_fh *fh = priv; mutex_lock(&fh->cap.vb_lock); - retval = videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize, + retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize, V4L2_MEMORY_MMAP); if (retval < 0) { mutex_unlock(&fh->cap.vb_lock); @@ -2759,7 +2760,7 @@ static int bttv_overlay(struct file *file, void *f, unsigned int on) mutex_lock(&fh->cap.vb_lock); if (on) { fh->ov.tvnorm = btv->tvnorm; - new = videobuf_pci_alloc(sizeof(*new)); + new = videobuf_sg_alloc(sizeof(*new)); new->crop = btv->crop[!!fh->do_crop].rect; bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); } else { @@ -2833,7 +2834,7 @@ static int bttv_s_fbuf(struct file *file, void *f, if (check_btres(fh, RESOURCE_OVERLAY)) { struct bttv_buffer *new; - new = videobuf_pci_alloc(sizeof(*new)); + new = videobuf_sg_alloc(sizeof(*new)); new->crop = btv->crop[!!fh->do_crop].rect; bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); retval = bttv_switch_overlay(btv, fh, new); @@ -3116,12 +3117,18 @@ static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop) static int bttv_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { + if (unlikely(a->index)) + return -EINVAL; + strcpy(a->name, "audio"); return 0; } static int bttv_s_audio(struct file *file, void *priv, struct v4l2_audio *a) { + if (unlikely(a->index)) + return -EINVAL; + return 0; } @@ -3183,7 +3190,7 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) /* need to capture a new frame */ if (locked_btres(fh->btv,RESOURCE_VIDEO_STREAM)) goto err; - fh->cap.read_buf = videobuf_pci_alloc(fh->cap.msize); + fh->cap.read_buf = videobuf_sg_alloc(fh->cap.msize); if (NULL == fh->cap.read_buf) goto err; fh->cap.read_buf->memory = V4L2_MEMORY_USERPTR; @@ -3250,14 +3257,14 @@ static int bttv_open(struct inode *inode, struct file *file) fh->ov.setup_ok = 0; v4l2_prio_open(&btv->prio,&fh->prio); - videobuf_queue_pci_init(&fh->cap, &bttv_video_qops, - btv->c.pci, &btv->s_lock, + videobuf_queue_sg_init(&fh->cap, &bttv_video_qops, + &btv->c.pci->dev, &btv->s_lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct bttv_buffer), fh); - videobuf_queue_pci_init(&fh->vbi, &bttv_vbi_qops, - btv->c.pci, &btv->s_lock, + videobuf_queue_sg_init(&fh->vbi, &bttv_vbi_qops, + &btv->c.pci->dev, &btv->s_lock, V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, sizeof(struct bttv_buffer), @@ -3415,6 +3422,7 @@ static int radio_open(struct inode *inode, struct file *file) { int minor = iminor(inode); struct bttv *btv = NULL; + struct bttv_fh *fh; unsigned int i; dprintk("bttv: open minor=%d\n",minor); @@ -3429,12 +3437,19 @@ static int radio_open(struct inode *inode, struct file *file) return -ENODEV; dprintk("bttv%d: open called (radio)\n",btv->c.nr); + + /* allocate per filehandle data */ + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + file->private_data = fh; + *fh = btv->init; + v4l2_prio_open(&btv->prio, &fh->prio); + mutex_lock(&btv->lock); btv->radio_user++; - file->private_data = btv; - bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL); audio_input(btv,TVAUDIO_INPUT_RADIO); @@ -3444,9 +3459,13 @@ static int radio_open(struct inode *inode, struct file *file) static int radio_release(struct inode *inode, struct file *file) { - struct bttv *btv = file->private_data; + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; struct rds_command cmd; + file->private_data = NULL; + kfree(fh); + btv->radio_user--; bttv_call_i2c_clients(btv, RDS_CMD_CLOSE, &cmd); @@ -3500,7 +3519,7 @@ static int radio_enum_input(struct file *file, void *priv, return -EINVAL; strcpy(i->name, "Radio"); - i->type = V4L2_INPUT_TYPE_TUNER; + i->type = V4L2_INPUT_TYPE_TUNER; return 0; } @@ -3508,8 +3527,11 @@ static int radio_enum_input(struct file *file, void *priv, static int radio_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { - memset(a, 0, sizeof(*a)); + if (unlikely(a->index)) + return -EINVAL; + strcpy(a->name, "Radio"); + return 0; } @@ -3529,11 +3551,17 @@ static int radio_s_tuner(struct file *file, void *priv, static int radio_s_audio(struct file *file, void *priv, struct v4l2_audio *a) { + if (unlikely(a->index)) + return -EINVAL; + return 0; } static int radio_s_input(struct file *filp, void *priv, unsigned int i) { + if (unlikely(i)) + return -EINVAL; + return 0; } @@ -3569,7 +3597,8 @@ static int radio_g_input(struct file *filp, void *priv, unsigned int *i) static ssize_t radio_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { - struct bttv *btv = file->private_data; + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; struct rds_command cmd; cmd.block_count = count/3; cmd.buffer = data; @@ -3583,7 +3612,8 @@ static ssize_t radio_read(struct file *file, char __user *data, static unsigned int radio_poll(struct file *file, poll_table *wait) { - struct bttv *btv = file->private_data; + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; struct rds_command cmd; cmd.instance = file; cmd.event_list = wait; @@ -3599,6 +3629,7 @@ static const struct file_operations radio_fops = .open = radio_open, .read = radio_read, .release = radio_release, + .compat_ioctl = v4l_compat_ioctl32, .ioctl = video_ioctl2, .llseek = no_llseek, .poll = radio_poll, diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index fc9ecb21eec..a38af98f4ca 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -278,6 +278,12 @@ int bttv_input_init(struct bttv *btv) ir->mask_keyup = 0x004000; ir->polling = 50; /* ms */ break; + case BTTV_BOARD_KOZUMI_KTV_01C: + ir_codes = ir_codes_pctv_sedna; + ir->mask_keycode = 0x001f00; + ir->mask_keyup = 0x006000; + ir->polling = 50; /* ms */ + break; } if (NULL == ir_codes) { dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type); diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c index e5979f77504..0af586876e7 100644 --- a/drivers/media/video/bt8xx/bttv-risc.c +++ b/drivers/media/video/bt8xx/bttv-risc.c @@ -48,7 +48,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, { u32 instructions,line,todo; struct scatterlist *sg; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -128,7 +128,8 @@ bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc, unsigned int cpadding) { unsigned int instructions,line,todo,ylen,chroma; - u32 *rp,ri; + __le32 *rp; + u32 ri; struct scatterlist *ysg; struct scatterlist *usg; struct scatterlist *vsg; @@ -244,7 +245,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, { int dwords,rc,line,maxy,start,end,skip,nskips; struct btcx_skiplist *skips; - u32 *rp,ri,ra; + __le32 *rp; + u32 ri,ra; u32 addr; /* skip list for window clipping */ diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c index 75fa82c7c73..bfdbc469e30 100644 --- a/drivers/media/video/bt8xx/bttv-vbi.c +++ b/drivers/media/video/bt8xx/bttv-vbi.c @@ -54,7 +54,7 @@ #define VBI_DEFLINES 16 static unsigned int vbibufs = 4; -static unsigned int vbi_debug = 0; +static unsigned int vbi_debug; module_param(vbibufs, int, 0444); module_param(vbi_debug, int, 0644); diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index bf4c339a520..f2393202904 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -19,6 +19,7 @@ #include <media/ir-common.h> #include <media/ir-kbd-i2c.h> #include <media/i2c-addr.h> +#include <media/tuner.h> /* ---------------------------------------------------------- */ /* exported by bttv-cards.c */ @@ -173,6 +174,8 @@ #define BTTV_BOARD_VOODOOTV_200 0x93 #define BTTV_BOARD_DVICO_FUSIONHDTV_2 0x94 #define BTTV_BOARD_TYPHOON_TVTUNERPCI 0x95 +#define BTTV_BOARD_GEOVISION_GV600 0x96 +#define BTTV_BOARD_KOZUMI_KTV_01C 0x97 /* more card-specific defines */ diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index 1305d315cfc..27da7b42327 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -42,7 +42,6 @@ #include <linux/device.h> #include <media/videobuf-dma-sg.h> -#include <media/tuner.h> #include <media/tveeprom.h> #include <media/ir-common.h> @@ -82,8 +81,6 @@ /* Limits scaled width, which must be a multiple of 4. */ #define MAX_HACTIVE (0x3FF & -4) -#define clamp(x, low, high) min (max (low, x), high) - #define BTTV_NORMS (\ V4L2_STD_PAL | V4L2_STD_PAL_N | \ V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \ diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c index ce0840ccd59..f42701f82e7 100644 --- a/drivers/media/video/btcx-risc.c +++ b/drivers/media/video/btcx-risc.c @@ -63,7 +63,7 @@ int btcx_riscmem_alloc(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int size) { - u32 *cpu; + __le32 *cpu; dma_addr_t dma; if (NULL != risc->cpu && risc->size < size) diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h index 503e6c6d7b6..861bc811282 100644 --- a/drivers/media/video/btcx-risc.h +++ b/drivers/media/video/btcx-risc.h @@ -2,8 +2,8 @@ */ struct btcx_riscmem { unsigned int size; - u32 *cpu; - u32 *jmp; + __le32 *cpu; + __le32 *jmp; dma_addr_t dma; }; diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 032265383df..b364adaae78 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -523,7 +523,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[]) int ret=1; unsigned int hi, lo; unsigned int hi2, lo2; - static int state = 0; + static int state; if (buffer == NULL) { @@ -898,7 +898,9 @@ static const struct file_operations qcam_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = qcam_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = qcam_read, .llseek = no_llseek, }; @@ -912,7 +914,7 @@ static struct video_device qcam_template= #define MAX_CAMS 4 static struct qcam_device *qcams[MAX_CAMS]; -static unsigned int num_cams = 0; +static unsigned int num_cams; static int init_bwqcam(struct parport *port) { diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index cf1546b5a7f..fe1e67bb1ca 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -36,6 +36,7 @@ #include <linux/videodev.h> #include <media/v4l2-common.h> #include <linux/mutex.h> +#include <linux/jiffies.h> #include <asm/uaccess.h> @@ -69,7 +70,7 @@ struct qcam_device { static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 }; static int probe = 2; -static int force_rgb = 0; +static int force_rgb; static int video_nr = -1; static inline void qcam_set_ack(struct qcam_device *qcam, unsigned int i) @@ -95,7 +96,8 @@ static unsigned int qcam_await_ready1(struct qcam_device *qcam, unsigned long oldjiffies = jiffies; unsigned int i; - for (oldjiffies = jiffies; (jiffies - oldjiffies) < msecs_to_jiffies(40); ) + for (oldjiffies = jiffies; + time_before(jiffies, oldjiffies + msecs_to_jiffies(40)); ) if (qcam_ready1(qcam) == value) return 0; @@ -120,7 +122,8 @@ static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value) unsigned long oldjiffies = jiffies; unsigned int i; - for (oldjiffies = jiffies; (jiffies - oldjiffies) < msecs_to_jiffies(40); ) + for (oldjiffies = jiffies; + time_before(jiffies, oldjiffies + msecs_to_jiffies(40)); ) if (qcam_ready2(qcam) == value) return 0; @@ -689,7 +692,9 @@ static const struct file_operations qcam_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = qcam_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = qcam_read, .llseek = no_llseek, }; @@ -741,7 +746,7 @@ static struct qcam_device *qcam_init(struct parport *port) } static struct qcam_device *qcams[MAX_CAMS]; -static unsigned int num_cams = 0; +static unsigned int num_cams; static int init_cqcam(struct parport *port) { diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 7ae499c9c54..5195b1f3378 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -65,7 +65,7 @@ MODULE_SUPPORTED_DEVICE("Video"); */ #define MAX_DMA_BUFS 3 -static int alloc_bufs_at_read = 0; +static int alloc_bufs_at_read; module_param(alloc_bufs_at_read, bool, 0444); MODULE_PARM_DESC(alloc_bufs_at_read, "Non-zero value causes DMA buffers to be allocated when the " @@ -99,7 +99,7 @@ MODULE_PARM_DESC(max_buffers, "will be allowed to allocate. These buffers are big and live " "in vmalloc space."); -static int flip = 0; +static int flip; module_param(flip, bool, 0444); MODULE_PARM_DESC(flip, "If set, the sensor will be instructed to flip the image " diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index 7c630f5ee72..2a81376ef50 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -3792,7 +3792,9 @@ static const struct file_operations cpia_fops = { .read = cpia_read, .mmap = cpia_mmap, .ioctl = cpia_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/video/cpia.h b/drivers/media/video/cpia.h index 78392fb6f94..5096058bf57 100644 --- a/drivers/media/video/cpia.h +++ b/drivers/media/video/cpia.h @@ -412,11 +412,11 @@ void cpia_unregister_camera(struct cam_data *cam); /* ErrorCode */ #define ERROR_FLICKER_BELOW_MIN_EXP 0x01 /*flicker exposure got below minimum exposure */ #define ALOG(fmt,args...) printk(fmt, ##args) -#define LOG(fmt,args...) ALOG(KERN_INFO __FILE__ ":%s(%d):" fmt, __FUNCTION__ , __LINE__ , ##args) +#define LOG(fmt,args...) ALOG(KERN_INFO __FILE__ ":%s(%d):" fmt, __func__ , __LINE__ , ##args) #ifdef _CPIA_DEBUG_ #define ADBG(fmt,args...) printk(fmt, jiffies, ##args) -#define DBG(fmt,args...) ADBG(KERN_DEBUG __FILE__" (%ld):%s(%d):" fmt, __FUNCTION__, __LINE__ , ##args) +#define DBG(fmt,args...) ADBG(KERN_DEBUG __FILE__" (%ld):%s(%d):" fmt, __func__, __LINE__ , ##args) #else #define DBG(fmn,args...) do {} while(0) #endif diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c index a76bd786cf1..c8b9fdb700f 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -34,7 +34,7 @@ #include <linux/slab.h> #include <linux/vmalloc.h> -//#define _CPIA2_DEBUG_ +/* #define _CPIA2_DEBUG_ */ #include "cpia2patch.h" @@ -48,7 +48,7 @@ static const char *block_name[] = { }; #endif -static unsigned int debugs_on = 0;//DEBUG_REG; +static unsigned int debugs_on; /* default 0 - DEBUG_REG */ /****************************************************************************** @@ -570,7 +570,7 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd) block_name[block_index]); break; default: - LOG("%s: invalid request mode\n",__FUNCTION__); + LOG("%s: invalid request mode\n",__func__); return -EINVAL; } @@ -952,7 +952,7 @@ static int set_default_user_mode(struct camera_data *cam) frame_rate = CPIA2_VP_FRAMERATE_30; break; default: - LOG("%s: Invalid sensor flag value 0x%0X\n",__FUNCTION__, + LOG("%s: Invalid sensor flag value 0x%0X\n",__func__, cam->params.version.sensor_flags); return -EINVAL; } @@ -2356,12 +2356,12 @@ long cpia2_read(struct camera_data *cam, } if (!buf) { - ERR("%s: buffer NULL\n",__FUNCTION__); + ERR("%s: buffer NULL\n",__func__); return -EINVAL; } if (!cam) { - ERR("%s: Internal error, camera_data NULL!\n",__FUNCTION__); + ERR("%s: Internal error, camera_data NULL!\n",__func__); return -EINVAL; } @@ -2370,7 +2370,7 @@ long cpia2_read(struct camera_data *cam, return -ERESTARTSYS; if (!cam->present) { - LOG("%s: camera removed\n",__FUNCTION__); + LOG("%s: camera removed\n",__func__); mutex_unlock(&cam->busy_lock); return 0; /* EOF */ } @@ -2434,7 +2434,7 @@ unsigned int cpia2_poll(struct camera_data *cam, struct file *filp, unsigned int status=0; if(!cam) { - ERR("%s: Internal error, camera_data not found!\n",__FUNCTION__); + ERR("%s: Internal error, camera_data not found!\n",__func__); return POLLERR; } diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c index d8e929863a8..a4574740350 100644 --- a/drivers/media/video/cpia2/cpia2_usb.c +++ b/drivers/media/video/cpia2/cpia2_usb.c @@ -84,7 +84,7 @@ static struct usb_driver cpia2_driver = { *****************************************************************************/ static void process_frame(struct camera_data *cam) { - static int frame_count = 0; + static int frame_count; unsigned char *inbuff = cam->workbuff->data; diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index e378abec806..7ce2789fa97 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -1927,7 +1927,9 @@ static const struct file_operations fops_template = { .poll = cpia2_v4l_poll, .ioctl = cpia2_ioctl, .llseek = no_llseek, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .mmap = cpia2_mmap, }; diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c index 9da4726eb9b..ef1f8939998 100644 --- a/drivers/media/video/cpia_usb.c +++ b/drivers/media/video/cpia_usb.c @@ -170,7 +170,7 @@ static void cpia_usb_complete(struct urb *urb) /* resubmit */ urb->dev = ucpia->dev; if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0) - printk(KERN_ERR "%s: usb_submit_urb ret %d\n", __FUNCTION__, i); + printk(KERN_ERR "%s: usb_submit_urb ret %d\n", __func__, i); } static int cpia_usb_open(void *privdata) diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index fae469ce16f..03411503457 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -142,7 +142,8 @@ static int cs5345_command(struct i2c_client *client, unsigned cmd, void *arg) /* ----------------------------------------------------------------------- */ -static int cs5345_probe(struct i2c_client *client) +static int cs5345_probe(struct i2c_client *client, + const struct i2c_device_id *id) { /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) @@ -159,10 +160,17 @@ static int cs5345_probe(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static const struct i2c_device_id cs5345_id[] = { + { "cs5345", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cs5345_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "cs5345", .driverid = I2C_DRIVERID_CS5345, .command = cs5345_command, .probe = cs5345_probe, + .id_table = cs5345_id, }; diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index f41bfde045f..d965af860ab 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -135,7 +135,8 @@ static int cs53l32a_command(struct i2c_client *client, unsigned cmd, void *arg) * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static int cs53l32a_probe(struct i2c_client *client) +static int cs53l32a_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i; @@ -143,7 +144,8 @@ static int cs53l32a_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - snprintf(client->name, sizeof(client->name) - 1, "cs53l32a"); + if (!id) + strlcpy(client->name, "cs53l32a", sizeof(client->name)); v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); @@ -174,10 +176,17 @@ static int cs53l32a_probe(struct i2c_client *client) return 0; } +static const struct i2c_device_id cs53l32a_id[] = { + { "cs53l32a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cs53l32a_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "cs53l32a", .driverid = I2C_DRIVERID_CS53L32A, .command = cs53l32a_command, .probe = cs53l32a_probe, + .id_table = cs53l32a_id, }; diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig new file mode 100644 index 00000000000..9aefdc5ea79 --- /dev/null +++ b/drivers/media/video/cx18/Kconfig @@ -0,0 +1,23 @@ +config VIDEO_CX18 + tristate "Conexant cx23418 MPEG encoder support" + depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL + depends on INPUT # due to VIDEO_IR + depends on HOTPLUG # due to FW_LOADER + select I2C_ALGOBIT + select FW_LOADER + select VIDEO_IR + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_CX2341X + select VIDEO_CS5345 + select DVB_S5H1409 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + ---help--- + This is a video4linux driver for Conexant cx23418 based + PCI combo video recorder devices. + + This is used in devices such as the Hauppauge HVR-1600 + cards. + + To compile this driver as a module, choose M here: the + module will be called cx18. diff --git a/drivers/media/video/cx18/Makefile b/drivers/media/video/cx18/Makefile new file mode 100644 index 00000000000..b23d2e26120 --- /dev/null +++ b/drivers/media/video/cx18/Makefile @@ -0,0 +1,11 @@ +cx18-objs := cx18-driver.o cx18-cards.o cx18-i2c.o cx18-firmware.o cx18-gpio.o \ + cx18-queue.o cx18-streams.o cx18-fileops.o cx18-ioctl.o cx18-controls.o \ + cx18-mailbox.o cx18-vbi.o cx18-audio.o cx18-video.o cx18-irq.o \ + cx18-av-core.o cx18-av-audio.o cx18-av-firmware.o cx18-av-vbi.o cx18-scb.o \ + cx18-dvb.o + +obj-$(CONFIG_VIDEO_CX18) += cx18.o + +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends +EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c new file mode 100644 index 00000000000..1adc404d955 --- /dev/null +++ b/drivers/media/video/cx18/cx18-audio.c @@ -0,0 +1,73 @@ +/* + * cx18 audio-related functions + * + * Derived from ivtv-audio.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-i2c.h" +#include "cx18-cards.h" +#include "cx18-audio.h" + +/* Selects the audio input and output according to the current + settings. */ +int cx18_audio_set_io(struct cx18 *cx) +{ + struct v4l2_routing route; + u32 audio_input; + int mux_input; + + /* Determine which input to use */ + if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { + audio_input = cx->card->radio_input.audio_input; + mux_input = cx->card->radio_input.muxer_input; + } else { + audio_input = + cx->card->audio_inputs[cx->audio_input].audio_input; + mux_input = + cx->card->audio_inputs[cx->audio_input].muxer_input; + } + + /* handle muxer chips */ + route.input = mux_input; + route.output = 0; + cx18_i2c_hw(cx, cx->card->hw_muxer, VIDIOC_INT_S_AUDIO_ROUTING, &route); + + route.input = audio_input; + return cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, + VIDIOC_INT_S_AUDIO_ROUTING, &route); +} + +void cx18_audio_set_route(struct cx18 *cx, struct v4l2_routing *route) +{ + cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, + VIDIOC_INT_S_AUDIO_ROUTING, route); +} + +void cx18_audio_set_audio_clock_freq(struct cx18 *cx, u8 freq) +{ + static u32 freqs[3] = { 44100, 48000, 32000 }; + + /* The audio clock of the digitizer must match the codec sample + rate otherwise you get some very strange effects. */ + if (freq > 2) + return; + cx18_call_i2c_clients(cx, VIDIOC_INT_AUDIO_CLOCK_FREQ, &freqs[freq]); +} diff --git a/drivers/media/video/cx18/cx18-audio.h b/drivers/media/video/cx18/cx18-audio.h new file mode 100644 index 00000000000..cb569a69379 --- /dev/null +++ b/drivers/media/video/cx18/cx18-audio.h @@ -0,0 +1,26 @@ +/* + * cx18 audio-related functions + * + * Derived from ivtv-audio.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int cx18_audio_set_io(struct cx18 *cx); +void cx18_audio_set_route(struct cx18 *cx, struct v4l2_routing *route); +void cx18_audio_set_audio_clock_freq(struct cx18 *cx, u8 freq); diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c new file mode 100644 index 00000000000..2dc3a5dd170 --- /dev/null +++ b/drivers/media/video/cx18/cx18-av-audio.c @@ -0,0 +1,361 @@ +/* + * cx18 ADEC audio functions + * + * Derived from cx25840-audio.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include "cx18-driver.h" + +static int set_audclk_freq(struct cx18 *cx, u32 freq) +{ + struct cx18_av_state *state = &cx->av_state; + + if (freq != 32000 && freq != 44100 && freq != 48000) + return -EINVAL; + + /* common for all inputs and rates */ + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */ + cx18_av_write(cx, 0x127, 0x50); + + if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + switch (freq) { + case 32000: + /* VID_PLL and AUX_PLL */ + cx18_av_write4(cx, 0x108, 0x1006040f); + + /* AUX_PLL_FRAC */ + cx18_av_write4(cx, 0x110, 0x01bb39ee); + + /* src3/4/6_ctl = 0x0801f77f */ + cx18_av_write4(cx, 0x900, 0x0801f77f); + cx18_av_write4(cx, 0x904, 0x0801f77f); + cx18_av_write4(cx, 0x90c, 0x0801f77f); + break; + + case 44100: + /* VID_PLL and AUX_PLL */ + cx18_av_write4(cx, 0x108, 0x1009040f); + + /* AUX_PLL_FRAC */ + cx18_av_write4(cx, 0x110, 0x00ec6bd6); + + /* src3/4/6_ctl = 0x08016d59 */ + cx18_av_write4(cx, 0x900, 0x08016d59); + cx18_av_write4(cx, 0x904, 0x08016d59); + cx18_av_write4(cx, 0x90c, 0x08016d59); + break; + + case 48000: + /* VID_PLL and AUX_PLL */ + cx18_av_write4(cx, 0x108, 0x100a040f); + + /* AUX_PLL_FRAC */ + cx18_av_write4(cx, 0x110, 0x0098d6e5); + + /* src3/4/6_ctl = 0x08014faa */ + cx18_av_write4(cx, 0x900, 0x08014faa); + cx18_av_write4(cx, 0x904, 0x08014faa); + cx18_av_write4(cx, 0x90c, 0x08014faa); + break; + } + } else { + switch (freq) { + case 32000: + /* VID_PLL and AUX_PLL */ + cx18_av_write4(cx, 0x108, 0x1e08040f); + + /* AUX_PLL_FRAC */ + cx18_av_write4(cx, 0x110, 0x012a0869); + + /* src1_ctl = 0x08010000 */ + cx18_av_write4(cx, 0x8f8, 0x08010000); + + /* src3/4/6_ctl = 0x08020000 */ + cx18_av_write4(cx, 0x900, 0x08020000); + cx18_av_write4(cx, 0x904, 0x08020000); + cx18_av_write4(cx, 0x90c, 0x08020000); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */ + cx18_av_write(cx, 0x127, 0x54); + break; + + case 44100: + /* VID_PLL and AUX_PLL */ + cx18_av_write4(cx, 0x108, 0x1809040f); + + /* AUX_PLL_FRAC */ + cx18_av_write4(cx, 0x110, 0x00ec6bd6); + + /* src1_ctl = 0x08010000 */ + cx18_av_write4(cx, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl = 0x08020000 */ + cx18_av_write4(cx, 0x900, 0x08017385); + cx18_av_write4(cx, 0x904, 0x08017385); + cx18_av_write4(cx, 0x90c, 0x08017385); + break; + + case 48000: + /* VID_PLL and AUX_PLL */ + cx18_av_write4(cx, 0x108, 0x180a040f); + + /* AUX_PLL_FRAC */ + cx18_av_write4(cx, 0x110, 0x0098d6e5); + + /* src1_ctl = 0x08010000 */ + cx18_av_write4(cx, 0x8f8, 0x08018000); + + /* src3/4/6_ctl = 0x08020000 */ + cx18_av_write4(cx, 0x900, 0x08015555); + cx18_av_write4(cx, 0x904, 0x08015555); + cx18_av_write4(cx, 0x90c, 0x08015555); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +void cx18_av_audio_set_path(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + + /* stop microcontroller */ + cx18_av_and_or(cx, 0x803, ~0x10, 0); + + /* assert soft reset */ + cx18_av_and_or(cx, 0x810, ~0x1, 0x01); + + /* Mute everything to prevent the PFFT! */ + cx18_av_write(cx, 0x8d3, 0x1f); + + if (state->aud_input == CX18_AV_AUDIO_SERIAL) { + /* Set Path1 to Serial Audio Input */ + cx18_av_write4(cx, 0x8d0, 0x01011012); + + /* The microcontroller should not be started for the + * non-tuner inputs: autodetection is specific for + * TV audio. */ + } else { + /* Set Path1 to Analog Demod Main Channel */ + cx18_av_write4(cx, 0x8d0, 0x1f063870); + } + + set_audclk_freq(cx, state->audclk_freq); + + /* deassert soft reset */ + cx18_av_and_or(cx, 0x810, ~0x1, 0x00); + + if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + /* When the microcontroller detects the + * audio format, it will unmute the lines */ + cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + } +} + +static int get_volume(struct cx18 *cx) +{ + /* Volume runs +18dB to -96dB in 1/2dB steps + * change to fit the msp3400 -114dB to +12dB range */ + + /* check PATH1_VOLUME */ + int vol = 228 - cx18_av_read(cx, 0x8d4); + vol = (vol / 2) + 23; + return vol << 9; +} + +static void set_volume(struct cx18 *cx, int volume) +{ + /* First convert the volume to msp3400 values (0-127) */ + int vol = volume >> 9; + /* now scale it up to cx18_av values + * -114dB to -96dB maps to 0 + * this should be 19, but in my testing that was 4dB too loud */ + if (vol <= 23) + vol = 0; + else + vol -= 23; + + /* PATH1_VOLUME */ + cx18_av_write(cx, 0x8d4, 228 - (vol * 2)); +} + +static int get_bass(struct cx18 *cx) +{ + /* bass is 49 steps +12dB to -12dB */ + + /* check PATH1_EQ_BASS_VOL */ + int bass = cx18_av_read(cx, 0x8d9) & 0x3f; + bass = (((48 - bass) * 0xffff) + 47) / 48; + return bass; +} + +static void set_bass(struct cx18 *cx, int bass) +{ + /* PATH1_EQ_BASS_VOL */ + cx18_av_and_or(cx, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff)); +} + +static int get_treble(struct cx18 *cx) +{ + /* treble is 49 steps +12dB to -12dB */ + + /* check PATH1_EQ_TREBLE_VOL */ + int treble = cx18_av_read(cx, 0x8db) & 0x3f; + treble = (((48 - treble) * 0xffff) + 47) / 48; + return treble; +} + +static void set_treble(struct cx18 *cx, int treble) +{ + /* PATH1_EQ_TREBLE_VOL */ + cx18_av_and_or(cx, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff)); +} + +static int get_balance(struct cx18 *cx) +{ + /* balance is 7 bit, 0 to -96dB */ + + /* check PATH1_BAL_LEVEL */ + int balance = cx18_av_read(cx, 0x8d5) & 0x7f; + /* check PATH1_BAL_LEFT */ + if ((cx18_av_read(cx, 0x8d5) & 0x80) == 0) + balance = 0x80 - balance; + else + balance = 0x80 + balance; + return balance << 8; +} + +static void set_balance(struct cx18 *cx, int balance) +{ + int bal = balance >> 8; + if (bal > 0x80) { + /* PATH1_BAL_LEFT */ + cx18_av_and_or(cx, 0x8d5, 0x7f, 0x80); + /* PATH1_BAL_LEVEL */ + cx18_av_and_or(cx, 0x8d5, ~0x7f, bal & 0x7f); + } else { + /* PATH1_BAL_LEFT */ + cx18_av_and_or(cx, 0x8d5, 0x7f, 0x00); + /* PATH1_BAL_LEVEL */ + cx18_av_and_or(cx, 0x8d5, ~0x7f, 0x80 - bal); + } +} + +static int get_mute(struct cx18 *cx) +{ + /* check SRC1_MUTE_EN */ + return cx18_av_read(cx, 0x8d3) & 0x2 ? 1 : 0; +} + +static void set_mute(struct cx18 *cx, int mute) +{ + struct cx18_av_state *state = &cx->av_state; + + if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + /* Must turn off microcontroller in order to mute sound. + * Not sure if this is the best method, but it does work. + * If the microcontroller is running, then it will undo any + * changes to the mute register. */ + if (mute) { + /* disable microcontroller */ + cx18_av_and_or(cx, 0x803, ~0x10, 0x00); + cx18_av_write(cx, 0x8d3, 0x1f); + } else { + /* enable microcontroller */ + cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + } + } else { + /* SRC1_MUTE_EN */ + cx18_av_and_or(cx, 0x8d3, ~0x2, mute ? 0x02 : 0x00); + } +} + +int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_control *ctrl = arg; + int retval; + + switch (cmd) { + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + cx18_av_and_or(cx, 0x803, ~0x10, 0); + cx18_av_write(cx, 0x8d3, 0x1f); + } + cx18_av_and_or(cx, 0x810, ~0x1, 1); + retval = set_audclk_freq(cx, *(u32 *)arg); + cx18_av_and_or(cx, 0x810, ~0x1, 0); + if (state->aud_input != CX18_AV_AUDIO_SERIAL) + cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + return retval; + + case VIDIOC_G_CTRL: + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + ctrl->value = get_volume(cx); + break; + case V4L2_CID_AUDIO_BASS: + ctrl->value = get_bass(cx); + break; + case V4L2_CID_AUDIO_TREBLE: + ctrl->value = get_treble(cx); + break; + case V4L2_CID_AUDIO_BALANCE: + ctrl->value = get_balance(cx); + break; + case V4L2_CID_AUDIO_MUTE: + ctrl->value = get_mute(cx); + break; + default: + return -EINVAL; + } + break; + + case VIDIOC_S_CTRL: + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + set_volume(cx, ctrl->value); + break; + case V4L2_CID_AUDIO_BASS: + set_bass(cx, ctrl->value); + break; + case V4L2_CID_AUDIO_TREBLE: + set_treble(cx, ctrl->value); + break; + case V4L2_CID_AUDIO_BALANCE: + set_balance(cx, ctrl->value); + break; + case V4L2_CID_AUDIO_MUTE: + set_mute(cx, ctrl->value); + break; + default: + return -EINVAL; + } + break; + + default: + return -EINVAL; + } + + return 0; +} diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c new file mode 100644 index 00000000000..faca43eb940 --- /dev/null +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -0,0 +1,943 @@ +/* + * cx18 ADEC audio functions + * + * Derived from cx25840-core.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include "cx18-driver.h" + +int cx18_av_write(struct cx18 *cx, u16 addr, u8 value) +{ + u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3)); + u32 mask = 0xff; + int shift = (addr & 3) * 8; + + x = (x & ~(mask << shift)) | ((u32)value << shift); + writel(x, cx->reg_mem + 0xc40000 + (addr & ~3)); + return 0; +} + +int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value) +{ + writel(value, cx->reg_mem + 0xc40000 + addr); + return 0; +} + +u8 cx18_av_read(struct cx18 *cx, u16 addr) +{ + u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3)); + int shift = (addr & 3) * 8; + + return (x >> shift) & 0xff; +} + +u32 cx18_av_read4(struct cx18 *cx, u16 addr) +{ + return readl(cx->reg_mem + 0xc40000 + addr); +} + +int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask, + u8 or_value) +{ + return cx18_av_write(cx, addr, + (cx18_av_read(cx, addr) & and_mask) | + or_value); +} + +int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask, + u32 or_value) +{ + return cx18_av_write4(cx, addr, + (cx18_av_read4(cx, addr) & and_mask) | + or_value); +} + +int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, int no_acfg_mask) +{ + int retval; + u32 saved_reg[8] = {0}; + + if (no_acfg_mask & CXADEC_NO_ACFG_AFE) { + saved_reg[0] = cx18_av_read4(cx, CXADEC_CHIP_CTRL); + saved_reg[1] = cx18_av_read4(cx, CXADEC_AFE_CTRL); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_PLL) { + saved_reg[2] = cx18_av_read4(cx, CXADEC_PLL_CTRL1); + saved_reg[3] = cx18_av_read4(cx, CXADEC_VID_PLL_FRAC); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_VID) { + saved_reg[4] = cx18_av_read4(cx, CXADEC_HORIZ_TIM_CTRL); + saved_reg[5] = cx18_av_read4(cx, CXADEC_VERT_TIM_CTRL); + saved_reg[6] = cx18_av_read4(cx, CXADEC_SRC_COMB_CFG); + saved_reg[7] = cx18_av_read4(cx, CXADEC_CHROMA_VBIOFF_CFG); + } + + retval = cx18_av_write(cx, addr, value); + + if (no_acfg_mask & CXADEC_NO_ACFG_AFE) { + cx18_av_write4(cx, CXADEC_CHIP_CTRL, saved_reg[0]); + cx18_av_write4(cx, CXADEC_AFE_CTRL, saved_reg[1]); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_PLL) { + cx18_av_write4(cx, CXADEC_PLL_CTRL1, saved_reg[2]); + cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, saved_reg[3]); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_VID) { + cx18_av_write4(cx, CXADEC_HORIZ_TIM_CTRL, saved_reg[4]); + cx18_av_write4(cx, CXADEC_VERT_TIM_CTRL, saved_reg[5]); + cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, saved_reg[6]); + cx18_av_write4(cx, CXADEC_CHROMA_VBIOFF_CFG, saved_reg[7]); + } + + return retval; +} + +int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned and_mask, + u8 or_value, int no_acfg_mask) +{ + return cx18_av_write_no_acfg(cx, addr, + (cx18_av_read(cx, addr) & and_mask) | + or_value, no_acfg_mask); +} + +/* ----------------------------------------------------------------------- */ + +static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, + enum cx18_av_audio_input aud_input); +static void log_audio_status(struct cx18 *cx); +static void log_video_status(struct cx18 *cx); + +/* ----------------------------------------------------------------------- */ + +static void cx18_av_initialize(struct cx18 *cx) +{ + u32 v; + + cx18_av_loadfw(cx); + /* Stop 8051 code execution */ + cx18_av_write4(cx, CXADEC_DL_CTL, 0x03000000); + + /* initallize the PLL by toggling sleep bit */ + v = cx18_av_read4(cx, CXADEC_HOST_REG1); + /* enable sleep mode */ + cx18_av_write4(cx, CXADEC_HOST_REG1, v | 1); + /* disable sleep mode */ + cx18_av_write4(cx, CXADEC_HOST_REG1, v & 0xfffe); + + /* initialize DLLs */ + v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF; + /* disable FLD */ + cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v); + /* enable FLD */ + cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v | 0x10000100); + + v = cx18_av_read4(cx, CXADEC_DLL2_DIAG_CTRL) & 0xE1FFFEFF; + /* disable FLD */ + cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v); + /* enable FLD */ + cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v | 0x06000100); + + /* set analog bias currents. Set Vreg to 1.20V. */ + cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL1, 0x000A1802); + + v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1; + /* enable TUNE_FIL_RST */ + cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL3, v); + /* disable TUNE_FIL_RST */ + cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL3, v & 0xFFFFFFFE); + + /* enable 656 output */ + cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00); + + /* video output drive strength */ + cx18_av_and_or4(cx, CXADEC_PIN_CTRL2, ~0, 0x2); + + /* reset video */ + cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0x8000); + cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0); + + /* set video to auto-detect */ + /* Clear bits 11-12 to enable slow locking mode. Set autodetect mode */ + /* set the comb notch = 1 */ + cx18_av_and_or4(cx, CXADEC_MODE_CTRL, 0xFFF7E7F0, 0x02040800); + + /* Enable wtw_en in CRUSH_CTRL (Set bit 22) */ + /* Enable maj_sel in CRUSH_CTRL (Set bit 20) */ + cx18_av_and_or4(cx, CXADEC_CRUSH_CTRL, ~0, 0x00500000); + + /* Set VGA_TRACK_RANGE to 0x20 */ + cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000); + + /* Enable VBI capture */ + cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253F); + /* cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253E); */ + + /* Set the video input. + The setting in MODE_CTRL gets lost when we do the above setup */ + /* EncSetSignalStd(dwDevNum, pEnc->dwSigStd); */ + /* EncSetVideoInput(dwDevNum, pEnc->VidIndSelection); */ + + v = cx18_av_read4(cx, CXADEC_AFE_CTRL); + v &= 0xFFFBFFFF; /* turn OFF bit 18 for droop_comp_ch1 */ + v &= 0xFFFF7FFF; /* turn OFF bit 9 for clamp_sel_ch1 */ + v &= 0xFFFFFFFE; /* turn OFF bit 0 for 12db_ch1 */ + /* v |= 0x00000001;*/ /* turn ON bit 0 for 12db_ch1 */ + cx18_av_write4(cx, CXADEC_AFE_CTRL, v); + +/* if(dwEnable && dw3DCombAvailable) { */ +/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */ +/* } else { */ +/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */ +/* } */ + cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F); +} + +/* ----------------------------------------------------------------------- */ + +static void input_change(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + v4l2_std_id std = state->std; + + /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */ + if (std & V4L2_STD_SECAM) + cx18_av_write_no_acfg(cx, 0x402, 0, CXADEC_NO_ACFG_ALL); + else { + cx18_av_write_no_acfg(cx, 0x402, 0x04, CXADEC_NO_ACFG_ALL); + cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); + } + cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); + cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0x60, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); + + if (std & V4L2_STD_525_60) { + if (std == V4L2_STD_NTSC_M_JP) { + /* Japan uses EIAJ audio standard */ + cx18_av_write(cx, 0x808, 0xf7); + cx18_av_write(cx, 0x80b, 0x02); + } else if (std == V4L2_STD_NTSC_M_KR) { + /* South Korea uses A2 audio standard */ + cx18_av_write(cx, 0x808, 0xf8); + cx18_av_write(cx, 0x80b, 0x03); + } else { + /* Others use the BTSC audio standard */ + cx18_av_write(cx, 0x808, 0xf6); + cx18_av_write(cx, 0x80b, 0x01); + } + } else if (std & V4L2_STD_PAL) { + /* Follow tuner change procedure for PAL */ + cx18_av_write(cx, 0x808, 0xff); + cx18_av_write(cx, 0x80b, 0x03); + } else if (std & V4L2_STD_SECAM) { + /* Select autodetect for SECAM */ + cx18_av_write(cx, 0x808, 0xff); + cx18_av_write(cx, 0x80b, 0x03); + } + + if (cx18_av_read(cx, 0x803) & 0x10) { + /* restart audio decoder microcontroller */ + cx18_av_and_or(cx, 0x803, ~0x10, 0x00); + cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + } +} + +static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, + enum cx18_av_audio_input aud_input) +{ + struct cx18_av_state *state = &cx->av_state; + u8 is_composite = (vid_input >= CX18_AV_COMPOSITE1 && + vid_input <= CX18_AV_COMPOSITE8); + u8 reg; + + CX18_DEBUG_INFO("decoder set video input %d, audio input %d\n", + vid_input, aud_input); + + if (is_composite) { + reg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1); + } else { + int luma = vid_input & 0xf0; + int chroma = vid_input & 0xf00; + + if ((vid_input & ~0xff0) || + luma < CX18_AV_SVIDEO_LUMA1 || + luma > CX18_AV_SVIDEO_LUMA8 || + chroma < CX18_AV_SVIDEO_CHROMA4 || + chroma > CX18_AV_SVIDEO_CHROMA8) { + CX18_ERR("0x%04x is not a valid video input!\n", + vid_input); + return -EINVAL; + } + reg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4); + if (chroma >= CX18_AV_SVIDEO_CHROMA7) { + reg &= 0x3f; + reg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2; + } else { + reg &= 0xcf; + reg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4; + } + } + + switch (aud_input) { + case CX18_AV_AUDIO_SERIAL: + /* do nothing, use serial audio input */ + break; + case CX18_AV_AUDIO4: reg &= ~0x30; break; + case CX18_AV_AUDIO5: reg &= ~0x30; reg |= 0x10; break; + case CX18_AV_AUDIO6: reg &= ~0x30; reg |= 0x20; break; + case CX18_AV_AUDIO7: reg &= ~0xc0; break; + case CX18_AV_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; + + default: + CX18_ERR("0x%04x is not a valid audio input!\n", aud_input); + return -EINVAL; + } + + cx18_av_write(cx, 0x103, reg); + /* Set INPUT_MODE to Composite (0) or S-Video (1) */ + cx18_av_and_or_no_acfg(cx, 0x401, ~0x6, is_composite ? 0 : 0x02, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); + /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ + cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); + /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ + if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) + cx18_av_and_or(cx, 0x102, ~0x4, 4); + else + cx18_av_and_or(cx, 0x102, ~0x4, 0); + /*cx18_av_and_or4(cx, 0x104, ~0x001b4180, 0x00004180);*/ + + state->vid_input = vid_input; + state->aud_input = aud_input; + cx18_av_audio_set_path(cx); + input_change(cx); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int set_v4lstd(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + u8 fmt = 0; /* zero is autodetect */ + u8 pal_m = 0; + + /* First tests should be against specific std */ + if (state->std == V4L2_STD_NTSC_M_JP) { + fmt = 0x2; + } else if (state->std == V4L2_STD_NTSC_443) { + fmt = 0x3; + } else if (state->std == V4L2_STD_PAL_M) { + pal_m = 1; + fmt = 0x5; + } else if (state->std == V4L2_STD_PAL_N) { + fmt = 0x6; + } else if (state->std == V4L2_STD_PAL_Nc) { + fmt = 0x7; + } else if (state->std == V4L2_STD_PAL_60) { + fmt = 0x8; + } else { + /* Then, test against generic ones */ + if (state->std & V4L2_STD_NTSC) + fmt = 0x1; + else if (state->std & V4L2_STD_PAL) + fmt = 0x4; + else if (state->std & V4L2_STD_SECAM) + fmt = 0xc; + } + + CX18_DEBUG_INFO("changing video std to fmt %i\n", fmt); + + /* Follow step 9 of section 3.16 in the cx18_av datasheet. + Without this PAL may display a vertical ghosting effect. + This happens for example with the Yuan MPC622. */ + if (fmt >= 4 && fmt < 8) { + /* Set format to NTSC-M */ + cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, 1, CXADEC_NO_ACFG_AFE); + /* Turn off LCOMB */ + cx18_av_and_or(cx, 0x47b, ~6, 0); + } + cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, fmt, CXADEC_NO_ACFG_AFE); + cx18_av_and_or_no_acfg(cx, 0x403, ~0x3, pal_m, CXADEC_NO_ACFG_ALL); + cx18_av_vbi_setup(cx); + input_change(cx); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int set_v4lctrl(struct cx18 *cx, struct v4l2_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (ctrl->value < 0 || ctrl->value > 255) { + CX18_ERR("invalid brightness setting %d\n", + ctrl->value); + return -ERANGE; + } + + cx18_av_write(cx, 0x414, ctrl->value - 128); + break; + + case V4L2_CID_CONTRAST: + if (ctrl->value < 0 || ctrl->value > 127) { + CX18_ERR("invalid contrast setting %d\n", + ctrl->value); + return -ERANGE; + } + + cx18_av_write(cx, 0x415, ctrl->value << 1); + break; + + case V4L2_CID_SATURATION: + if (ctrl->value < 0 || ctrl->value > 127) { + CX18_ERR("invalid saturation setting %d\n", + ctrl->value); + return -ERANGE; + } + + cx18_av_write(cx, 0x420, ctrl->value << 1); + cx18_av_write(cx, 0x421, ctrl->value << 1); + break; + + case V4L2_CID_HUE: + if (ctrl->value < -127 || ctrl->value > 127) { + CX18_ERR("invalid hue setting %d\n", ctrl->value); + return -ERANGE; + } + + cx18_av_write(cx, 0x422, ctrl->value); + break; + + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_MUTE: + return cx18_av_audio(cx, VIDIOC_S_CTRL, ctrl); + + default: + return -EINVAL; + } + + return 0; +} + +static int get_v4lctrl(struct cx18 *cx, struct v4l2_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = (s8)cx18_av_read(cx, 0x414) + 128; + break; + case V4L2_CID_CONTRAST: + ctrl->value = cx18_av_read(cx, 0x415) >> 1; + break; + case V4L2_CID_SATURATION: + ctrl->value = cx18_av_read(cx, 0x420) >> 1; + break; + case V4L2_CID_HUE: + ctrl->value = (s8)cx18_av_read(cx, 0x422); + break; + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_MUTE: + return cx18_av_audio(cx, VIDIOC_G_CTRL, ctrl); + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int get_v4lfmt(struct cx18 *cx, struct v4l2_format *fmt) +{ + switch (fmt->type) { + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + return cx18_av_vbi(cx, VIDIOC_G_FMT, fmt); + default: + return -EINVAL; + } + + return 0; +} + +static int set_v4lfmt(struct cx18 *cx, struct v4l2_format *fmt) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_pix_format *pix; + int HSC, VSC, Vsrc, Hsrc, filter, Vlines; + int is_50Hz = !(state->std & V4L2_STD_525_60); + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + pix = &(fmt->fmt.pix); + + Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4; + Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4; + + Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4; + Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4; + + Vlines = pix->height + (is_50Hz ? 4 : 7); + + if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) || + (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) { + CX18_ERR("%dx%d is not a valid size!\n", + pix->width, pix->height); + return -ERANGE; + } + + HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20); + VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); + VSC &= 0x1fff; + + if (pix->width >= 385) + filter = 0; + else if (pix->width > 192) + filter = 1; + else if (pix->width > 96) + filter = 2; + else + filter = 3; + + CX18_DEBUG_INFO("decoder set size %dx%d -> scale %ux%u\n", + pix->width, pix->height, HSC, VSC); + + /* HSCALE=HSC */ + cx18_av_write(cx, 0x418, HSC & 0xff); + cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff); + cx18_av_write(cx, 0x41a, HSC >> 16); + /* VSCALE=VSC */ + cx18_av_write(cx, 0x41c, VSC & 0xff); + cx18_av_write(cx, 0x41d, VSC >> 8); + /* VS_INTRLACE=1 VFILT=filter */ + cx18_av_write(cx, 0x41e, 0x8 | filter); + break; + + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + return cx18_av_vbi(cx, VIDIOC_S_FMT, fmt); + + case V4L2_BUF_TYPE_VBI_CAPTURE: + return cx18_av_vbi(cx, VIDIOC_S_FMT, fmt); + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_tuner *vt = arg; + struct v4l2_routing *route = arg; + + /* ignore these commands */ + switch (cmd) { + case TUNER_SET_TYPE_ADDR: + return 0; + } + + if (!state->is_initialized) { + CX18_DEBUG_INFO("cmd %08x triggered fw load\n", cmd); + /* initialize on first use */ + state->is_initialized = 1; + cx18_av_initialize(cx); + } + + switch (cmd) { + case VIDIOC_INT_DECODE_VBI_LINE: + return cx18_av_vbi(cx, cmd, arg); + + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + return cx18_av_audio(cx, cmd, arg); + + case VIDIOC_STREAMON: + CX18_DEBUG_INFO("enable output\n"); + cx18_av_write(cx, 0x115, 0x8c); + cx18_av_write(cx, 0x116, 0x07); + break; + + case VIDIOC_STREAMOFF: + CX18_DEBUG_INFO("disable output\n"); + cx18_av_write(cx, 0x115, 0x00); + cx18_av_write(cx, 0x116, 0x00); + break; + + case VIDIOC_LOG_STATUS: + log_video_status(cx); + log_audio_status(cx); + break; + + case VIDIOC_G_CTRL: + return get_v4lctrl(cx, (struct v4l2_control *)arg); + + case VIDIOC_S_CTRL: + return set_v4lctrl(cx, (struct v4l2_control *)arg); + + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *qc = arg; + + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + case V4L2_CID_CONTRAST: + case V4L2_CID_SATURATION: + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill_std(qc); + default: + break; + } + + switch (qc->id) { + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + return v4l2_ctrl_query_fill_std(qc); + default: + return -EINVAL; + } + return -EINVAL; + } + + case VIDIOC_G_STD: + *(v4l2_std_id *)arg = state->std; + break; + + case VIDIOC_S_STD: + if (state->radio == 0 && state->std == *(v4l2_std_id *)arg) + return 0; + state->radio = 0; + state->std = *(v4l2_std_id *)arg; + return set_v4lstd(cx); + + case AUDC_SET_RADIO: + state->radio = 1; + break; + + case VIDIOC_INT_G_VIDEO_ROUTING: + route->input = state->vid_input; + route->output = 0; + break; + + case VIDIOC_INT_S_VIDEO_ROUTING: + return set_input(cx, route->input, state->aud_input); + + case VIDIOC_INT_G_AUDIO_ROUTING: + route->input = state->aud_input; + route->output = 0; + break; + + case VIDIOC_INT_S_AUDIO_ROUTING: + return set_input(cx, state->vid_input, route->input); + + case VIDIOC_S_FREQUENCY: + input_change(cx); + break; + + case VIDIOC_G_TUNER: + { + u8 vpres = cx18_av_read(cx, 0x40e) & 0x20; + u8 mode; + int val = 0; + + if (state->radio) + break; + + vt->signal = vpres ? 0xffff : 0x0; + + vt->capability |= + V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + + mode = cx18_av_read(cx, 0x804); + + /* get rxsubchans and audmode */ + if ((mode & 0xf) == 1) + val |= V4L2_TUNER_SUB_STEREO; + else + val |= V4L2_TUNER_SUB_MONO; + + if (mode == 2 || mode == 4) + val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + + if (mode & 0x10) + val |= V4L2_TUNER_SUB_SAP; + + vt->rxsubchans = val; + vt->audmode = state->audmode; + break; + } + + case VIDIOC_S_TUNER: + if (state->radio) + break; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + /* mono -> mono + stereo -> mono + bilingual -> lang1 */ + cx18_av_and_or(cx, 0x809, ~0xf, 0x00); + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + /* mono -> mono + stereo -> stereo + bilingual -> lang1 */ + cx18_av_and_or(cx, 0x809, ~0xf, 0x04); + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang1/lang2 */ + cx18_av_and_or(cx, 0x809, ~0xf, 0x07); + break; + case V4L2_TUNER_MODE_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang2 */ + cx18_av_and_or(cx, 0x809, ~0xf, 0x01); + break; + default: + return -EINVAL; + } + state->audmode = vt->audmode; + break; + + case VIDIOC_G_FMT: + return get_v4lfmt(cx, (struct v4l2_format *)arg); + + case VIDIOC_S_FMT: + return set_v4lfmt(cx, (struct v4l2_format *)arg); + + case VIDIOC_INT_RESET: + cx18_av_initialize(cx); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* ----------------------------------------------------------------------- */ + +static void log_video_status(struct cx18 *cx) +{ + static const char *const fmt_strs[] = { + "0x0", + "NTSC-M", "NTSC-J", "NTSC-4.43", + "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60", + "0x9", "0xA", "0xB", + "SECAM", + "0xD", "0xE", "0xF" + }; + + struct cx18_av_state *state = &cx->av_state; + u8 vidfmt_sel = cx18_av_read(cx, 0x400) & 0xf; + u8 gen_stat1 = cx18_av_read(cx, 0x40d); + u8 gen_stat2 = cx18_av_read(cx, 0x40e); + int vid_input = state->vid_input; + + CX18_INFO("Video signal: %spresent\n", + (gen_stat2 & 0x20) ? "" : "not "); + CX18_INFO("Detected format: %s\n", + fmt_strs[gen_stat1 & 0xf]); + + CX18_INFO("Specified standard: %s\n", + vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection"); + + if (vid_input >= CX18_AV_COMPOSITE1 && + vid_input <= CX18_AV_COMPOSITE8) { + CX18_INFO("Specified video input: Composite %d\n", + vid_input - CX18_AV_COMPOSITE1 + 1); + } else { + CX18_INFO("Specified video input: S-Video (Luma In%d, Chroma In%d)\n", + (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8); + } + + CX18_INFO("Specified audioclock freq: %d Hz\n", state->audclk_freq); +} + +/* ----------------------------------------------------------------------- */ + +static void log_audio_status(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + u8 download_ctl = cx18_av_read(cx, 0x803); + u8 mod_det_stat0 = cx18_av_read(cx, 0x804); + u8 mod_det_stat1 = cx18_av_read(cx, 0x805); + u8 audio_config = cx18_av_read(cx, 0x808); + u8 pref_mode = cx18_av_read(cx, 0x809); + u8 afc0 = cx18_av_read(cx, 0x80b); + u8 mute_ctl = cx18_av_read(cx, 0x8d3); + int aud_input = state->aud_input; + char *p; + + switch (mod_det_stat0) { + case 0x00: p = "mono"; break; + case 0x01: p = "stereo"; break; + case 0x02: p = "dual"; break; + case 0x04: p = "tri"; break; + case 0x10: p = "mono with SAP"; break; + case 0x11: p = "stereo with SAP"; break; + case 0x12: p = "dual with SAP"; break; + case 0x14: p = "tri with SAP"; break; + case 0xfe: p = "forced mode"; break; + default: p = "not defined"; break; + } + CX18_INFO("Detected audio mode: %s\n", p); + + switch (mod_det_stat1) { + case 0x00: p = "not defined"; break; + case 0x01: p = "EIAJ"; break; + case 0x02: p = "A2-M"; break; + case 0x03: p = "A2-BG"; break; + case 0x04: p = "A2-DK1"; break; + case 0x05: p = "A2-DK2"; break; + case 0x06: p = "A2-DK3"; break; + case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x08: p = "AM-L"; break; + case 0x09: p = "NICAM-BG"; break; + case 0x0a: p = "NICAM-DK"; break; + case 0x0b: p = "NICAM-I"; break; + case 0x0c: p = "NICAM-L"; break; + case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "detected chrominance"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; + case 0xff: p = "no detected audio standard"; break; + default: p = "not defined"; break; + } + CX18_INFO("Detected audio standard: %s\n", p); + CX18_INFO("Audio muted: %s\n", + (mute_ctl & 0x2) ? "yes" : "no"); + CX18_INFO("Audio microcontroller: %s\n", + (download_ctl & 0x10) ? "running" : "stopped"); + + switch (audio_config >> 4) { + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; + case 0x0f: p = "automatic detection"; break; + default: p = "undefined"; break; + } + CX18_INFO("Configured audio standard: %s\n", p); + + if ((audio_config >> 4) < 0xF) { + switch (audio_config & 0xF) { + case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break; + case 0x01: p = "MONO2 (LANGUAGE B)"; break; + case 0x02: p = "MONO3 (STEREO forced MONO)"; break; + case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; + case 0x04: p = "STEREO"; break; + case 0x05: p = "DUAL1 (AC)"; break; + case 0x06: p = "DUAL2 (BC)"; break; + case 0x07: p = "DUAL3 (AB)"; break; + default: p = "undefined"; + } + CX18_INFO("Configured audio mode: %s\n", p); + } else { + switch (audio_config & 0xF) { + case 0x00: p = "BG"; break; + case 0x01: p = "DK1"; break; + case 0x02: p = "DK2"; break; + case 0x03: p = "DK3"; break; + case 0x04: p = "I"; break; + case 0x05: p = "L"; break; + case 0x06: p = "BTSC"; break; + case 0x07: p = "EIAJ"; break; + case 0x08: p = "A2-M"; break; + case 0x09: p = "FM Radio (4.5 MHz)"; break; + case 0x0a: p = "FM Radio (5.5 MHz)"; break; + case 0x0b: p = "S-Video"; break; + case 0x0f: p = "automatic standard and mode detection"; break; + default: p = "undefined"; break; + } + CX18_INFO("Configured audio system: %s\n", p); + } + + if (aud_input) + CX18_INFO("Specified audio input: Tuner (In%d)\n", + aud_input); + else + CX18_INFO("Specified audio input: External\n"); + + switch (pref_mode & 0xf) { + case 0: p = "mono/language A"; break; + case 1: p = "language B"; break; + case 2: p = "language C"; break; + case 3: p = "analog fallback"; break; + case 4: p = "stereo"; break; + case 5: p = "language AC"; break; + case 6: p = "language BC"; break; + case 7: p = "language AB"; break; + default: p = "undefined"; break; + } + CX18_INFO("Preferred audio mode: %s\n", p); + + if ((audio_config & 0xf) == 0xf) { + switch ((afc0 >> 3) & 0x1) { + case 0: p = "system DK"; break; + case 1: p = "system L"; break; + } + CX18_INFO("Selected 65 MHz format: %s\n", p); + + switch (afc0 & 0x7) { + case 0: p = "Chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; break; + } + CX18_INFO("Selected 45 MHz format: %s\n", p); + } +} diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h new file mode 100644 index 00000000000..c172823ce1d --- /dev/null +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -0,0 +1,332 @@ +/* + * cx18 ADEC header + * + * Derived from cx25840-core.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX18_AV_CORE_H_ +#define _CX18_AV_CORE_H_ + +struct cx18; + +enum cx18_av_video_input { + /* Composite video inputs In1-In8 */ + CX18_AV_COMPOSITE1 = 1, + CX18_AV_COMPOSITE2, + CX18_AV_COMPOSITE3, + CX18_AV_COMPOSITE4, + CX18_AV_COMPOSITE5, + CX18_AV_COMPOSITE6, + CX18_AV_COMPOSITE7, + CX18_AV_COMPOSITE8, + + /* S-Video inputs consist of one luma input (In1-In8) ORed with one + chroma input (In5-In8) */ + CX18_AV_SVIDEO_LUMA1 = 0x10, + CX18_AV_SVIDEO_LUMA2 = 0x20, + CX18_AV_SVIDEO_LUMA3 = 0x30, + CX18_AV_SVIDEO_LUMA4 = 0x40, + CX18_AV_SVIDEO_LUMA5 = 0x50, + CX18_AV_SVIDEO_LUMA6 = 0x60, + CX18_AV_SVIDEO_LUMA7 = 0x70, + CX18_AV_SVIDEO_LUMA8 = 0x80, + CX18_AV_SVIDEO_CHROMA4 = 0x400, + CX18_AV_SVIDEO_CHROMA5 = 0x500, + CX18_AV_SVIDEO_CHROMA6 = 0x600, + CX18_AV_SVIDEO_CHROMA7 = 0x700, + CX18_AV_SVIDEO_CHROMA8 = 0x800, + + /* S-Video aliases for common luma/chroma combinations */ + CX18_AV_SVIDEO1 = 0x510, + CX18_AV_SVIDEO2 = 0x620, + CX18_AV_SVIDEO3 = 0x730, + CX18_AV_SVIDEO4 = 0x840, +}; + +enum cx18_av_audio_input { + /* Audio inputs: serial or In4-In8 */ + CX18_AV_AUDIO_SERIAL, + CX18_AV_AUDIO4 = 4, + CX18_AV_AUDIO5, + CX18_AV_AUDIO6, + CX18_AV_AUDIO7, + CX18_AV_AUDIO8, +}; + +struct cx18_av_state { + int radio; + v4l2_std_id std; + enum cx18_av_video_input vid_input; + enum cx18_av_audio_input aud_input; + u32 audclk_freq; + int audmode; + int vbi_line_offset; + u32 id; + u32 rev; + int is_initialized; +}; + + +/* Registers */ +#define CXADEC_CHIP_TYPE_TIGER 0x837 +#define CXADEC_CHIP_TYPE_MAKO 0x843 + +#define CXADEC_HOST_REG1 0x000 +#define CXADEC_HOST_REG2 0x001 + +#define CXADEC_CHIP_CTRL 0x100 +#define CXADEC_AFE_CTRL 0x104 +#define CXADEC_PLL_CTRL1 0x108 +#define CXADEC_VID_PLL_FRAC 0x10C +#define CXADEC_AUX_PLL_FRAC 0x110 +#define CXADEC_PIN_CTRL1 0x114 +#define CXADEC_PIN_CTRL2 0x118 +#define CXADEC_PIN_CFG1 0x11C +#define CXADEC_PIN_CFG2 0x120 + +#define CXADEC_PIN_CFG3 0x124 +#define CXADEC_I2S_MCLK 0x127 + +#define CXADEC_AUD_LOCK1 0x128 +#define CXADEC_AUD_LOCK2 0x12C +#define CXADEC_POWER_CTRL 0x130 +#define CXADEC_AFE_DIAG_CTRL1 0x134 +#define CXADEC_AFE_DIAG_CTRL2 0x138 +#define CXADEC_AFE_DIAG_CTRL3 0x13C +#define CXADEC_PLL_DIAG_CTRL 0x140 +#define CXADEC_TEST_CTRL1 0x144 +#define CXADEC_TEST_CTRL2 0x148 +#define CXADEC_BIST_STAT 0x14C +#define CXADEC_DLL1_DIAG_CTRL 0x158 +#define CXADEC_DLL2_DIAG_CTRL 0x15C + +/* IR registers */ +#define CXADEC_IR_CTRL_REG 0x200 +#define CXADEC_IR_TXCLK_REG 0x204 +#define CXADEC_IR_RXCLK_REG 0x208 +#define CXADEC_IR_CDUTY_REG 0x20C +#define CXADEC_IR_STAT_REG 0x210 +#define CXADEC_IR_IRQEN_REG 0x214 +#define CXADEC_IR_FILTER_REG 0x218 +#define CXADEC_IR_FIFO_REG 0x21C + +/* Video Registers */ +#define CXADEC_MODE_CTRL 0x400 +#define CXADEC_OUT_CTRL1 0x404 +#define CXADEC_OUT_CTRL2 0x408 +#define CXADEC_GEN_STAT 0x40C +#define CXADEC_INT_STAT_MASK 0x410 +#define CXADEC_LUMA_CTRL 0x414 + +#define CXADEC_BRIGHTNESS_CTRL_BYTE 0x414 +#define CXADEC_CONTRAST_CTRL_BYTE 0x415 +#define CXADEC_LUMA_CTRL_BYTE_3 0x416 + +#define CXADEC_HSCALE_CTRL 0x418 +#define CXADEC_VSCALE_CTRL 0x41C + +#define CXADEC_CHROMA_CTRL 0x420 + +#define CXADEC_USAT_CTRL_BYTE 0x420 +#define CXADEC_VSAT_CTRL_BYTE 0x421 +#define CXADEC_HUE_CTRL_BYTE 0x422 + +#define CXADEC_VBI_LINE_CTRL1 0x424 +#define CXADEC_VBI_LINE_CTRL2 0x428 +#define CXADEC_VBI_LINE_CTRL3 0x42C +#define CXADEC_VBI_LINE_CTRL4 0x430 +#define CXADEC_VBI_LINE_CTRL5 0x434 +#define CXADEC_VBI_FC_CFG 0x438 +#define CXADEC_VBI_MISC_CFG1 0x43C +#define CXADEC_VBI_MISC_CFG2 0x440 +#define CXADEC_VBI_PAY1 0x444 +#define CXADEC_VBI_PAY2 0x448 +#define CXADEC_VBI_CUST1_CFG1 0x44C +#define CXADEC_VBI_CUST1_CFG2 0x450 +#define CXADEC_VBI_CUST1_CFG3 0x454 +#define CXADEC_VBI_CUST2_CFG1 0x458 +#define CXADEC_VBI_CUST2_CFG2 0x45C +#define CXADEC_VBI_CUST2_CFG3 0x460 +#define CXADEC_VBI_CUST3_CFG1 0x464 +#define CXADEC_VBI_CUST3_CFG2 0x468 +#define CXADEC_VBI_CUST3_CFG3 0x46C +#define CXADEC_HORIZ_TIM_CTRL 0x470 +#define CXADEC_VERT_TIM_CTRL 0x474 +#define CXADEC_SRC_COMB_CFG 0x478 +#define CXADEC_CHROMA_VBIOFF_CFG 0x47C +#define CXADEC_FIELD_COUNT 0x480 +#define CXADEC_MISC_TIM_CTRL 0x484 +#define CXADEC_DFE_CTRL1 0x488 +#define CXADEC_DFE_CTRL2 0x48C +#define CXADEC_DFE_CTRL3 0x490 +#define CXADEC_PLL_CTRL2 0x494 +#define CXADEC_HTL_CTRL 0x498 +#define CXADEC_COMB_CTRL 0x49C +#define CXADEC_CRUSH_CTRL 0x4A0 +#define CXADEC_SOFT_RST_CTRL 0x4A4 +#define CXADEC_MV_DT_CTRL2 0x4A8 +#define CXADEC_MV_DT_CTRL3 0x4AC +#define CXADEC_MISC_DIAG_CTRL 0x4B8 + +#define CXADEC_DL_CTL 0x800 +#define CXADEC_DL_CTL_ADDRESS_LOW 0x800 /* Byte 1 in DL_CTL */ +#define CXADEC_DL_CTL_ADDRESS_HIGH 0x801 /* Byte 2 in DL_CTL */ +#define CXADEC_DL_CTL_DATA 0x802 /* Byte 3 in DL_CTL */ +#define CXADEC_DL_CTL_CONTROL 0x803 /* Byte 4 in DL_CTL */ + +#define CXADEC_STD_DET_STATUS 0x804 + +#define CXADEC_STD_DET_CTL 0x808 +#define CXADEC_STD_DET_CTL_AUD_CTL 0x808 /* Byte 1 in STD_DET_CTL */ +#define CXADEC_STD_DET_CTL_PREF_MODE 0x809 /* Byte 2 in STD_DET_CTL */ + +#define CXADEC_DW8051_INT 0x80C +#define CXADEC_GENERAL_CTL 0x810 +#define CXADEC_AAGC_CTL 0x814 +#define CXADEC_IF_SRC_CTL 0x818 +#define CXADEC_ANLOG_DEMOD_CTL 0x81C +#define CXADEC_ROT_FREQ_CTL 0x820 +#define CXADEC_FM1_CTL 0x824 +#define CXADEC_PDF_CTL 0x828 +#define CXADEC_DFT1_CTL1 0x82C +#define CXADEC_DFT1_CTL2 0x830 +#define CXADEC_DFT_STATUS 0x834 +#define CXADEC_DFT2_CTL1 0x838 +#define CXADEC_DFT2_CTL2 0x83C +#define CXADEC_DFT2_STATUS 0x840 +#define CXADEC_DFT3_CTL1 0x844 +#define CXADEC_DFT3_CTL2 0x848 +#define CXADEC_DFT3_STATUS 0x84C +#define CXADEC_DFT4_CTL1 0x850 +#define CXADEC_DFT4_CTL2 0x854 +#define CXADEC_DFT4_STATUS 0x858 +#define CXADEC_AM_MTS_DET 0x85C +#define CXADEC_ANALOG_MUX_CTL 0x860 +#define CXADEC_DIG_PLL_CTL1 0x864 +#define CXADEC_DIG_PLL_CTL2 0x868 +#define CXADEC_DIG_PLL_CTL3 0x86C +#define CXADEC_DIG_PLL_CTL4 0x870 +#define CXADEC_DIG_PLL_CTL5 0x874 +#define CXADEC_DEEMPH_GAIN_CTL 0x878 +#define CXADEC_DEEMPH_COEF1 0x87C +#define CXADEC_DEEMPH_COEF2 0x880 +#define CXADEC_DBX1_CTL1 0x884 +#define CXADEC_DBX1_CTL2 0x888 +#define CXADEC_DBX1_STATUS 0x88C +#define CXADEC_DBX2_CTL1 0x890 +#define CXADEC_DBX2_CTL2 0x894 +#define CXADEC_DBX2_STATUS 0x898 +#define CXADEC_AM_FM_DIFF 0x89C + +/* NICAM registers go here */ +#define CXADEC_NICAM_STATUS 0x8C8 +#define CXADEC_DEMATRIX_CTL 0x8CC + +#define CXADEC_PATH1_CTL1 0x8D0 +#define CXADEC_PATH1_VOL_CTL 0x8D4 +#define CXADEC_PATH1_EQ_CTL 0x8D8 +#define CXADEC_PATH1_SC_CTL 0x8DC + +#define CXADEC_PATH2_CTL1 0x8E0 +#define CXADEC_PATH2_VOL_CTL 0x8E4 +#define CXADEC_PATH2_EQ_CTL 0x8E8 +#define CXADEC_PATH2_SC_CTL 0x8EC + +#define CXADEC_SRC_CTL 0x8F0 +#define CXADEC_SRC_LF_COEF 0x8F4 +#define CXADEC_SRC1_CTL 0x8F8 +#define CXADEC_SRC2_CTL 0x8FC +#define CXADEC_SRC3_CTL 0x900 +#define CXADEC_SRC4_CTL 0x904 +#define CXADEC_SRC5_CTL 0x908 +#define CXADEC_SRC6_CTL 0x90C + +#define CXADEC_BASEBAND_OUT_SEL 0x910 +#define CXADEC_I2S_IN_CTL 0x914 +#define CXADEC_I2S_OUT_CTL 0x918 +#define CXADEC_AC97_CTL 0x91C +#define CXADEC_QAM_PDF 0x920 +#define CXADEC_QAM_CONST_DEC 0x924 +#define CXADEC_QAM_ROTATOR_FREQ 0x948 + +/* Bit defintions / settings used in Mako Audio */ +#define CXADEC_PREF_MODE_MONO_LANGA 0 +#define CXADEC_PREF_MODE_MONO_LANGB 1 +#define CXADEC_PREF_MODE_MONO_LANGC 2 +#define CXADEC_PREF_MODE_FALLBACK 3 +#define CXADEC_PREF_MODE_STEREO 4 +#define CXADEC_PREF_MODE_DUAL_LANG_AC 5 +#define CXADEC_PREF_MODE_DUAL_LANG_BC 6 +#define CXADEC_PREF_MODE_DUAL_LANG_AB 7 + + +#define CXADEC_DETECT_STEREO 1 +#define CXADEC_DETECT_DUAL 2 +#define CXADEC_DETECT_TRI 4 +#define CXADEC_DETECT_SAP 0x10 +#define CXADEC_DETECT_NO_SIGNAL 0xFF + +#define CXADEC_SELECT_AUDIO_STANDARD_BG 0xF0 /* NICAM BG and A2 BG */ +#define CXADEC_SELECT_AUDIO_STANDARD_DK1 0xF1 /* NICAM DK and A2 DK */ +#define CXADEC_SELECT_AUDIO_STANDARD_DK2 0xF2 +#define CXADEC_SELECT_AUDIO_STANDARD_DK3 0xF3 +#define CXADEC_SELECT_AUDIO_STANDARD_I 0xF4 /* NICAM I and A1 */ +#define CXADEC_SELECT_AUDIO_STANDARD_L 0xF5 /* NICAM L and System L AM */ +#define CXADEC_SELECT_AUDIO_STANDARD_BTSC 0xF6 +#define CXADEC_SELECT_AUDIO_STANDARD_EIAJ 0xF7 +#define CXADEC_SELECT_AUDIO_STANDARD_A2_M 0xF8 /* A2 M */ +#define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */ +#define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */ + +/* Flags on what to preserve on write to 0x400-0x403 with cx18_av_.*_no_acfg()*/ +#define CXADEC_NO_ACFG_AFE 0x01 /* Preserve 0x100-0x107 */ +#define CXADEC_NO_ACFG_PLL 0x02 /* Preserve 0x108-0x10f */ +#define CXADEC_NO_ACFG_VID 0x04 /* Preserve 0x470-0x47f */ +#define CXADEC_NO_ACFG_ALL 0x07 + +/* ----------------------------------------------------------------------- */ +/* cx18_av-core.c */ +int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); +int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, + int no_acfg_mask); +u8 cx18_av_read(struct cx18 *cx, u16 addr); +u32 cx18_av_read4(struct cx18 *cx, u16 addr); +int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value); +int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value); +int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned mask, u8 value, + int no_acfg_mask); +int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg); + +/* ----------------------------------------------------------------------- */ +/* cx18_av-firmware.c */ +int cx18_av_loadfw(struct cx18 *cx); + +/* ----------------------------------------------------------------------- */ +/* cx18_av-audio.c */ +int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg); +void cx18_av_audio_set_path(struct cx18 *cx); + +/* ----------------------------------------------------------------------- */ +/* cx18_av-vbi.c */ +void cx18_av_vbi_setup(struct cx18 *cx); +int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg); + +#endif diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c new file mode 100644 index 00000000000..526e142156c --- /dev/null +++ b/drivers/media/video/cx18/cx18-av-firmware.c @@ -0,0 +1,120 @@ +/* + * cx18 ADEC firmware functions + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include "cx18-driver.h" +#include <linux/firmware.h> + +#define FWFILE "v4l-cx23418-dig.fw" + +int cx18_av_loadfw(struct cx18 *cx) +{ + const struct firmware *fw = NULL; + u32 size; + u32 v; + u8 *ptr; + int i; + + if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) { + CX18_ERR("unable to open firmware %s\n", FWFILE); + return -EINVAL; + } + + cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000); + cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6); /* Byte 0 */ + + /* Reset the Mako core (Register is undocumented.) */ + cx18_av_write4(cx, 0x8100, 0x00010000); + + /* Put the 8051 in reset and enable firmware upload */ + cx18_av_write4(cx, CXADEC_DL_CTL, 0x0F000000); + + ptr = fw->data; + size = fw->size; + + for (i = 0; i < size; i++) { + u32 dl_control = 0x0F000000 | ((u32)ptr[i] << 16); + u32 value = 0; + int retries; + + for (retries = 0; retries < 5; retries++) { + cx18_av_write4(cx, CXADEC_DL_CTL, dl_control); + value = cx18_av_read4(cx, CXADEC_DL_CTL); + if ((value & 0x3F00) == (dl_control & 0x3F00)) + break; + } + if (retries >= 5) { + CX18_ERR("unable to load firmware %s\n", FWFILE); + release_firmware(fw); + return -EIO; + } + } + + cx18_av_write4(cx, CXADEC_DL_CTL, 0x13000000 | fw->size); + + /* Output to the 416 */ + cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000); + + /* Audio input control 1 set to Sony mode */ + /* Audio output input 2 is 0 for slave operation input */ + /* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */ + /* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge + after WS transition for first bit of audio word. */ + cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0); + + /* Audio output control 1 is set to Sony mode */ + /* Audio output control 2 is set to 1 for master mode */ + /* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */ + /* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge + after WS transition for first bit of audio word. */ + /* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT + are generated) */ + cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0); + + /* set alt I2s master clock to /16 and enable alt divider i2s + passthrough */ + cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5000B687); + + cx18_av_write4(cx, CXADEC_STD_DET_CTL, 0x000000F6); + /* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */ + + /* Set bit 0 in register 0x9CC to signify that this is MiniMe. */ + /* Register 0x09CC is defined by the Merlin firmware, and doesn't + have a name in the spec. */ + cx18_av_write4(cx, 0x09CC, 1); + +#define CX18_AUDIO_ENABLE 0xc72014 + v = read_reg(CX18_AUDIO_ENABLE); + /* If bit 11 is 1 */ + if (v & 0x800) + write_reg(v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Clear bit 10 */ + + /* Enable WW auto audio standard detection */ + v = cx18_av_read4(cx, CXADEC_STD_DET_CTL); + v |= 0xFF; /* Auto by default */ + v |= 0x400; /* Stereo by default */ + v |= 0x14000000; + cx18_av_write4(cx, CXADEC_STD_DET_CTL, v); + + release_firmware(fw); + + CX18_INFO("loaded %s firmware (%d bytes)\n", FWFILE, size); + return 0; +} diff --git a/drivers/media/video/cx18/cx18-av-vbi.c b/drivers/media/video/cx18/cx18-av-vbi.c new file mode 100644 index 00000000000..d09f1daf4eb --- /dev/null +++ b/drivers/media/video/cx18/cx18-av-vbi.c @@ -0,0 +1,413 @@ +/* + * cx18 ADEC VBI functions + * + * Derived from cx25840-vbi.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + + +#include "cx18-driver.h" + +static int odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static int decode_vps(u8 *dst, u8 *p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + + u8 c, err = 0; + int i; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | + ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + + return err & 0xf0; +} + +void cx18_av_vbi_setup(struct cx18 *cx) +{ + struct cx18_av_state *state = &cx->av_state; + v4l2_std_id std = state->std; + int hblank, hactive, burst, vblank, vactive, sc; + int vblank656, src_decimation; + int luma_lpf, uv_lpf, comb; + u32 pll_int, pll_frac, pll_post; + + /* datasheet startup, step 8d */ + if (std & ~V4L2_STD_NTSC) + cx18_av_write(cx, 0x49f, 0x11); + else + cx18_av_write(cx, 0x49f, 0x14); + + if (std & V4L2_STD_625_50) { + hblank = 0x084; + hactive = 0x2d0; + burst = 0x5d; + vblank = 0x024; + vactive = 0x244; + vblank656 = 0x28; + src_decimation = 0x21f; + + luma_lpf = 2; + if (std & V4L2_STD_SECAM) { + uv_lpf = 0; + comb = 0; + sc = 0x0a425f; + } else if (std == V4L2_STD_PAL_Nc) { + uv_lpf = 1; + comb = 0x20; + sc = 556453; + } else { + uv_lpf = 1; + comb = 0x20; + sc = 0x0a8263; + } + } else { + hactive = 720; + hblank = 122; + vactive = 487; + luma_lpf = 1; + uv_lpf = 1; + + src_decimation = 0x21f; + if (std == V4L2_STD_PAL_60) { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + luma_lpf = 2; + comb = 0x20; + sc = 0x0a8263; + } else if (std == V4L2_STD_PAL_M) { + vblank = 20; + vblank656 = 24; + burst = 0x61; + comb = 0x20; + + sc = 555452; + } else { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + comb = 0x66; + sc = 556063; + } + } + + /* DEBUG: Displays configured PLL frequency */ + pll_int = cx18_av_read(cx, 0x108); + pll_frac = cx18_av_read4(cx, 0x10c) & 0x1ffffff; + pll_post = cx18_av_read(cx, 0x109); + CX18_DEBUG_INFO("PLL regs = int: %u, frac: %u, post: %u\n", + pll_int, pll_frac, pll_post); + + if (pll_post) { + int fin, fsc; + int pll = 28636363L * ((((u64)pll_int) << 25) + pll_frac); + + pll >>= 25; + pll /= pll_post; + CX18_DEBUG_INFO("PLL = %d.%06d MHz\n", + pll / 1000000, pll % 1000000); + CX18_DEBUG_INFO("PLL/8 = %d.%06d MHz\n", + pll / 8000000, (pll / 8) % 1000000); + + fin = ((u64)src_decimation * pll) >> 12; + CX18_DEBUG_INFO("ADC Sampling freq = %d.%06d MHz\n", + fin / 1000000, fin % 1000000); + + fsc = (((u64)sc) * pll) >> 24L; + CX18_DEBUG_INFO("Chroma sub-carrier freq = %d.%06d MHz\n", + fsc / 1000000, fsc % 1000000); + + CX18_DEBUG_INFO("hblank %i, hactive %i, " + "vblank %i , vactive %i, vblank656 %i, src_dec %i," + "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x," + " sc 0x%06x\n", + hblank, hactive, vblank, vactive, vblank656, + src_decimation, burst, luma_lpf, uv_lpf, comb, sc); + } + + /* Sets horizontal blanking delay and active lines */ + cx18_av_write(cx, 0x470, hblank); + cx18_av_write(cx, 0x471, 0xff & (((hblank >> 8) & 0x3) | + (hactive << 4))); + cx18_av_write(cx, 0x472, hactive >> 4); + + /* Sets burst gate delay */ + cx18_av_write(cx, 0x473, burst); + + /* Sets vertical blanking delay and active duration */ + cx18_av_write(cx, 0x474, vblank); + cx18_av_write(cx, 0x475, 0xff & (((vblank >> 8) & 0x3) | + (vactive << 4))); + cx18_av_write(cx, 0x476, vactive >> 4); + cx18_av_write(cx, 0x477, vblank656); + + /* Sets src decimation rate */ + cx18_av_write(cx, 0x478, 0xff & src_decimation); + cx18_av_write(cx, 0x479, 0xff & (src_decimation >> 8)); + + /* Sets Luma and UV Low pass filters */ + cx18_av_write(cx, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30)); + + /* Enables comb filters */ + cx18_av_write(cx, 0x47b, comb); + + /* Sets SC Step*/ + cx18_av_write(cx, 0x47c, sc); + cx18_av_write(cx, 0x47d, 0xff & sc >> 8); + cx18_av_write(cx, 0x47e, 0xff & sc >> 16); + + /* Sets VBI parameters */ + if (std & V4L2_STD_625_50) { + cx18_av_write(cx, 0x47f, 0x01); + state->vbi_line_offset = 5; + } else { + cx18_av_write(cx, 0x47f, 0x00); + state->vbi_line_offset = 8; + } +} + +int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) +{ + struct cx18_av_state *state = &cx->av_state; + struct v4l2_format *fmt; + struct v4l2_sliced_vbi_format *svbi; + + switch (cmd) { + case VIDIOC_G_FMT: + { + static u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_WSS_625, 0, /* 4 */ + V4L2_SLICED_CAPTION_525, /* 6 */ + 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ + 0, 0, 0, 0 + }; + int is_pal = !(state->std & V4L2_STD_525_60); + int i; + + fmt = arg; + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + svbi = &fmt->fmt.sliced; + memset(svbi, 0, sizeof(*svbi)); + /* we're done if raw VBI is active */ + if ((cx18_av_read(cx, 0x404) & 0x10) == 0) + break; + + if (is_pal) { + for (i = 7; i <= 23; i++) { + u8 v = cx18_av_read(cx, 0x424 + i - 7); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } else { + for (i = 10; i <= 21; i++) { + u8 v = cx18_av_read(cx, 0x424 + i - 10); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } + break; + } + + case VIDIOC_S_FMT: + { + int is_pal = !(state->std & V4L2_STD_525_60); + int vbi_offset = is_pal ? 1 : 0; + int i, x; + u8 lcr[24]; + + fmt = arg; + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + svbi = &fmt->fmt.sliced; + if (svbi->service_set == 0) { + /* raw VBI */ + memset(svbi, 0, sizeof(*svbi)); + + /* Setup VBI */ + cx18_av_vbi_setup(cx); + + /* VBI Offset */ + cx18_av_write(cx, 0x47f, vbi_offset); + cx18_av_write(cx, 0x404, 0x2e); + break; + } + + for (x = 0; x <= 23; x++) + lcr[x] = 0x00; + + /* Setup VBI */ + cx18_av_vbi_setup(cx); + + /* Sliced VBI */ + cx18_av_write(cx, 0x404, 0x32); /* Ancillary data */ + cx18_av_write(cx, 0x406, 0x13); + cx18_av_write(cx, 0x47f, vbi_offset); + + if (is_pal) { + for (i = 0; i <= 6; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } else { + for (i = 0; i <= 9; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + + for (i = 22; i <= 23; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } + + for (i = 7; i <= 23; i++) { + for (x = 0; x <= 1; x++) { + switch (svbi->service_lines[1-x][i]) { + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 6 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 9 << (4 * x); + break; + } + } + } + + if (is_pal) { + for (x = 1, i = 0x424; i <= 0x434; i++, x++) + cx18_av_write(cx, i, lcr[6 + x]); + } else { + for (x = 1, i = 0x424; i <= 0x430; i++, x++) + cx18_av_write(cx, i, lcr[9 + x]); + for (i = 0x431; i <= 0x434; i++) + cx18_av_write(cx, i, 0); + } + + cx18_av_write(cx, 0x43c, 0x16); + cx18_av_write(cx, 0x474, is_pal ? 0x2a : 0x22); + break; + } + + case VIDIOC_INT_DECODE_VBI_LINE: + { + struct v4l2_decode_vbi_line *vbi = arg; + u8 *p = vbi->p; + int id1, id2, l, err = 0; + + if (p[0] || p[1] != 0xff || p[2] != 0xff || + (p[3] != 0x55 && p[3] != 0x91)) { + vbi->line = vbi->type = 0; + break; + } + + p += 4; + id1 = p[-1]; + id2 = p[0] & 0xf; + l = p[2] & 0x3f; + l += state->vbi_line_offset; + p += 4; + + switch (id2) { + case 1: + id2 = V4L2_SLICED_TELETEXT_B; + break; + case 4: + id2 = V4L2_SLICED_WSS_625; + break; + case 6: + id2 = V4L2_SLICED_CAPTION_525; + err = !odd_parity(p[0]) || !odd_parity(p[1]); + break; + case 9: + id2 = V4L2_SLICED_VPS; + if (decode_vps(p, p) != 0) + err = 1; + break; + default: + id2 = 0; + err = 1; + break; + } + + vbi->type = err ? 0 : id2; + vbi->line = err ? 0 : l; + vbi->is_second_field = err ? 0 : (id1 == 0x55); + vbi->p = p; + break; + } + } + + return 0; +} diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c new file mode 100644 index 00000000000..c26e0ef5b07 --- /dev/null +++ b/drivers/media/video/cx18/cx18-cards.c @@ -0,0 +1,294 @@ +/* + * cx18 functions to query card hardware + * + * Derived from ivtv-cards.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-cards.h" +#include "cx18-av-core.h" +#include "cx18-i2c.h" +#include <media/cs5345.h> + +/********************** card configuration *******************************/ + +/* usual i2c tuner addresses to probe */ +static struct cx18_card_tuner_i2c cx18_i2c_std = { + .radio = { I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, 0x60, I2C_CLIENT_END }, +}; + +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii + This keeps the PCI ID database up to date. Note that the entries + must be added under vendor 0x4444 (Conexant) as subsystem IDs. + New vendor IDs should still be added to the vendor ID list. */ + +/* Hauppauge HVR-1600 cards */ + +/* Note: for Hauppauge cards the tveeprom information is used instead + of PCI IDs */ +static const struct cx18_card cx18_card_hvr1600_esmt = { + .type = CX18_CARD_HVR_1600_ESMT, + .name = "Hauppauge HVR-1600", + .comment = "VBI is not yet supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_muxer = CX18_HW_CS5345, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | + CX18_HW_CS5345 | CX18_HW_DVB, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + { CX18_CARD_INPUT_LINE_IN1, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + { CX18_CARD_INPUT_LINE_IN2, + CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, + .ddr = { + /* ESMT M13S128324A-5B memory */ + .chip_config = 0x003, + .refresh = 0x30c, + .timing1 = 0x44220e82, + .timing2 = 0x08, + .tune_lane = 0, + .initial_emrs = 0, + }, + .gpio_init.initial_value = 0x3001, + .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + }, + .i2c = &cx18_i2c_std, +}; + +static const struct cx18_card cx18_card_hvr1600_samsung = { + .type = CX18_CARD_HVR_1600_SAMSUNG, + .name = "Hauppauge HVR-1600 (Preproduction)", + .comment = "VBI is not yet supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_muxer = CX18_HW_CS5345, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | + CX18_HW_CS5345 | CX18_HW_DVB, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + { CX18_CARD_INPUT_LINE_IN1, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + { CX18_CARD_INPUT_LINE_IN2, + CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, + .ddr = { + /* Samsung K4D263238G-VC33 memory */ + .chip_config = 0x003, + .refresh = 0x30c, + .timing1 = 0x23230b73, + .timing2 = 0x08, + .tune_lane = 0, + .initial_emrs = 2, + }, + .gpio_init.initial_value = 0x3001, + .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + }, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Compro VideoMate H900: note that this card is analog only! */ + +static const struct cx18_card_pci_info cx18_pci_h900[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_h900 = { + .type = CX18_CARD_COMPRO_H900, + .name = "Compro VideoMate H900", + .comment = "VBI is not yet supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_all = CX18_HW_TUNER, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO8, 0 }, + { CX18_CARD_INPUT_LINE_IN1, + CX18_AV_AUDIO_SERIAL, 0 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, + CX18_AV_AUDIO_SERIAL, 0 }, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .ddr = { + /* EtronTech EM6A9160TS-5G memory */ + .chip_config = 0x50003, + .refresh = 0x753, + .timing1 = 0x24330e84, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 0, + }, + .xceive_pin = 15, + .pci_list = cx18_pci_h900, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Yuan MPC718: not working at the moment! */ + +static const struct cx18_card_pci_info cx18_pci_mpc718[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_YUAN, 0x0718 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_mpc718 = { + .type = CX18_CARD_YUAN_MPC718, + .name = "Yuan MPC718", + .comment = "Some Composite and S-Video inputs are currently working.\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_all = CX18_HW_TUNER, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + { CX18_CARD_INPUT_SVIDEO2, 2, + CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, + { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, + .tuners = { + /* XC3028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .ddr = { + /* Probably Samsung K4D263238G-VC33 memory */ + .chip_config = 0x003, + .refresh = 0x30c, + .timing1 = 0x23230b73, + .timing2 = 0x08, + .tune_lane = 0, + .initial_emrs = 2, + }, + .xceive_pin = 15, + .pci_list = cx18_pci_mpc718, + .i2c = &cx18_i2c_std, +}; + +static const struct cx18_card *cx18_card_list[] = { + &cx18_card_hvr1600_esmt, + &cx18_card_hvr1600_samsung, + &cx18_card_h900, + &cx18_card_mpc718, +}; + +const struct cx18_card *cx18_get_card(u16 index) +{ + if (index >= ARRAY_SIZE(cx18_card_list)) + return NULL; + return cx18_card_list[index]; +} + +int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input) +{ + const struct cx18_card_video_input *card_input = + cx->card->video_inputs + index; + static const char * const input_strs[] = { + "Tuner 1", + "S-Video 1", + "S-Video 2", + "Composite 1", + "Composite 2", + "Composite 3" + }; + + memset(input, 0, sizeof(*input)); + if (index >= cx->nof_inputs) + return -EINVAL; + input->index = index; + strlcpy(input->name, input_strs[card_input->video_type - 1], + sizeof(input->name)); + input->type = (card_input->video_type == CX18_CARD_INPUT_VID_TUNER ? + V4L2_INPUT_TYPE_TUNER : V4L2_INPUT_TYPE_CAMERA); + input->audioset = (1 << cx->nof_audio_inputs) - 1; + input->std = (input->type == V4L2_INPUT_TYPE_TUNER) ? + cx->tuner_std : V4L2_STD_ALL; + return 0; +} + +int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *audio) +{ + const struct cx18_card_audio_input *aud_input = + cx->card->audio_inputs + index; + static const char * const input_strs[] = { + "Tuner 1", + "Line In 1", + "Line In 2" + }; + + memset(audio, 0, sizeof(*audio)); + if (index >= cx->nof_audio_inputs) + return -EINVAL; + strlcpy(audio->name, input_strs[aud_input->audio_type - 1], + sizeof(audio->name)); + audio->index = index; + audio->capability = V4L2_AUDCAP_STEREO; + return 0; +} diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h new file mode 100644 index 00000000000..dc2dd945d4c --- /dev/null +++ b/drivers/media/video/cx18/cx18-cards.h @@ -0,0 +1,139 @@ +/* + * cx18 functions to query card hardware + * + * Derived from ivtv-cards.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* hardware flags */ +#define CX18_HW_TUNER (1 << 0) +#define CX18_HW_TVEEPROM (1 << 1) +#define CX18_HW_CS5345 (1 << 2) +#define CX18_HW_GPIO (1 << 3) +#define CX18_HW_CX23418 (1 << 4) +#define CX18_HW_DVB (1 << 5) + +/* video inputs */ +#define CX18_CARD_INPUT_VID_TUNER 1 +#define CX18_CARD_INPUT_SVIDEO1 2 +#define CX18_CARD_INPUT_SVIDEO2 3 +#define CX18_CARD_INPUT_COMPOSITE1 4 +#define CX18_CARD_INPUT_COMPOSITE2 5 +#define CX18_CARD_INPUT_COMPOSITE3 6 + +/* audio inputs */ +#define CX18_CARD_INPUT_AUD_TUNER 1 +#define CX18_CARD_INPUT_LINE_IN1 2 +#define CX18_CARD_INPUT_LINE_IN2 3 + +#define CX18_CARD_MAX_VIDEO_INPUTS 6 +#define CX18_CARD_MAX_AUDIO_INPUTS 3 +#define CX18_CARD_MAX_TUNERS 2 + +/* V4L2 capability aliases */ +#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE) +/* | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE) not yet */ + +struct cx18_card_video_input { + u8 video_type; /* video input type */ + u8 audio_index; /* index in cx18_card_audio_input array */ + u16 video_input; /* hardware video input */ +}; + +struct cx18_card_audio_input { + u8 audio_type; /* audio input type */ + u32 audio_input; /* hardware audio input */ + u16 muxer_input; /* hardware muxer input for boards with a + multiplexer chip */ +}; + +struct cx18_card_pci_info { + u16 device; + u16 subsystem_vendor; + u16 subsystem_device; +}; + +/* GPIO definitions */ + +/* The mask is the set of bits used by the operation */ + +struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */ + u32 direction; /* DIR setting. Leave to 0 if no init is needed */ + u32 initial_value; +}; + +struct cx18_gpio_i2c_slave_reset { + u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */ + u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */ + int msecs_asserted; /* time period reset must remain asserted */ + int msecs_recovery; /* time after deassert for chips to be ready */ +}; + +struct cx18_card_tuner { + v4l2_std_id std; /* standard for which the tuner is suitable */ + int tuner; /* tuner ID (from tuner.h) */ +}; + +struct cx18_card_tuner_i2c { + unsigned short radio[2];/* radio tuner i2c address to probe */ + unsigned short demod[2];/* demodulator i2c address to probe */ + unsigned short tv[4]; /* tv tuner i2c addresses to probe */ +}; + +struct cx18_ddr { /* DDR config data */ + u32 chip_config; + u32 refresh; + u32 timing1; + u32 timing2; + u32 tune_lane; + u32 initial_emrs; +}; + +/* for card information/parameters */ +struct cx18_card { + int type; + char *name; + char *comment; + u32 v4l2_capabilities; + u32 hw_audio_ctrl; /* hardware used for the V4L2 controls (only + 1 dev allowed) */ + u32 hw_muxer; /* hardware used to multiplex audio input */ + u32 hw_all; /* all hardware used by the board */ + struct cx18_card_video_input video_inputs[CX18_CARD_MAX_VIDEO_INPUTS]; + struct cx18_card_audio_input audio_inputs[CX18_CARD_MAX_AUDIO_INPUTS]; + struct cx18_card_audio_input radio_input; + + /* GPIO card-specific settings */ + u8 xceive_pin; /* XCeive tuner GPIO reset pin */ + struct cx18_gpio_init gpio_init; + struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset; + + struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS]; + struct cx18_card_tuner_i2c *i2c; + + struct cx18_ddr ddr; + + /* list of device and subsystem vendor/devices that + correspond to this card type. */ + const struct cx18_card_pci_info *pci_list; +}; + +int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input); +int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *input); +const struct cx18_card *cx18_get_card(u16 index); diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c new file mode 100644 index 00000000000..87cf4102166 --- /dev/null +++ b/drivers/media/video/cx18/cx18-controls.c @@ -0,0 +1,306 @@ +/* + * cx18 ioctl control functions + * + * Derived from ivtv-controls.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-av-core.h" +#include "cx18-cards.h" +#include "cx18-ioctl.h" +#include "cx18-audio.h" +#include "cx18-i2c.h" +#include "cx18-mailbox.h" +#include "cx18-controls.h" + +static const u32 user_ctrls[] = { + V4L2_CID_USER_CLASS, + V4L2_CID_BRIGHTNESS, + V4L2_CID_CONTRAST, + V4L2_CID_SATURATION, + V4L2_CID_HUE, + V4L2_CID_AUDIO_VOLUME, + V4L2_CID_AUDIO_BALANCE, + V4L2_CID_AUDIO_BASS, + V4L2_CID_AUDIO_TREBLE, + V4L2_CID_AUDIO_MUTE, + V4L2_CID_AUDIO_LOUDNESS, + 0 +}; + +static const u32 *ctrl_classes[] = { + user_ctrls, + cx2341x_mpeg_ctrls, + NULL +}; + +static int cx18_queryctrl(struct cx18 *cx, struct v4l2_queryctrl *qctrl) +{ + const char *name; + + CX18_DEBUG_IOCTL("VIDIOC_QUERYCTRL(%08x)\n", qctrl->id); + + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); + if (qctrl->id == 0) + return -EINVAL; + + switch (qctrl->id) { + /* Standard V4L2 controls */ + case V4L2_CID_BRIGHTNESS: + case V4L2_CID_HUE: + case V4L2_CID_SATURATION: + case V4L2_CID_CONTRAST: + if (cx18_av_cmd(cx, VIDIOC_QUERYCTRL, qctrl)) + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + return 0; + + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_LOUDNESS: + if (cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, VIDIOC_QUERYCTRL, qctrl)) + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + return 0; + + default: + if (cx2341x_ctrl_query(&cx->params, qctrl)) + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + return 0; + } + strncpy(qctrl->name, name, sizeof(qctrl->name) - 1); + qctrl->name[sizeof(qctrl->name) - 1] = 0; + return 0; +} + +static int cx18_querymenu(struct cx18 *cx, struct v4l2_querymenu *qmenu) +{ + struct v4l2_queryctrl qctrl; + + qctrl.id = qmenu->id; + cx18_queryctrl(cx, &qctrl); + return v4l2_ctrl_query_menu(qmenu, &qctrl, cx2341x_ctrl_get_menu(qmenu->id)); +} + +static int cx18_s_ctrl(struct cx18 *cx, struct v4l2_control *vctrl) +{ + s32 v = vctrl->value; + + CX18_DEBUG_IOCTL("VIDIOC_S_CTRL(%08x, %x)\n", vctrl->id, v); + + switch (vctrl->id) { + /* Standard V4L2 controls */ + case V4L2_CID_BRIGHTNESS: + case V4L2_CID_HUE: + case V4L2_CID_SATURATION: + case V4L2_CID_CONTRAST: + return cx18_av_cmd(cx, VIDIOC_S_CTRL, vctrl); + + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_LOUDNESS: + return cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, VIDIOC_S_CTRL, vctrl); + + default: + CX18_DEBUG_IOCTL("invalid control %x\n", vctrl->id); + return -EINVAL; + } + return 0; +} + +static int cx18_g_ctrl(struct cx18 *cx, struct v4l2_control *vctrl) +{ + CX18_DEBUG_IOCTL("VIDIOC_G_CTRL(%08x)\n", vctrl->id); + + switch (vctrl->id) { + /* Standard V4L2 controls */ + case V4L2_CID_BRIGHTNESS: + case V4L2_CID_HUE: + case V4L2_CID_SATURATION: + case V4L2_CID_CONTRAST: + return cx18_av_cmd(cx, VIDIOC_G_CTRL, vctrl); + + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_LOUDNESS: + return cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, VIDIOC_G_CTRL, vctrl); + default: + CX18_DEBUG_IOCTL("invalid control %x\n", vctrl->id); + return -EINVAL; + } + return 0; +} + +static int cx18_setup_vbi_fmt(struct cx18 *cx, enum v4l2_mpeg_stream_vbi_fmt fmt) +{ + if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE)) + return -EINVAL; + if (atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + + /* First try to allocate sliced VBI buffers if needed. */ + if (fmt && cx->vbi.sliced_mpeg_data[0] == NULL) { + int i; + + for (i = 0; i < CX18_VBI_FRAMES; i++) { + /* Yuck, hardcoded. Needs to be a define */ + cx->vbi.sliced_mpeg_data[i] = kmalloc(2049, GFP_KERNEL); + if (cx->vbi.sliced_mpeg_data[i] == NULL) { + while (--i >= 0) { + kfree(cx->vbi.sliced_mpeg_data[i]); + cx->vbi.sliced_mpeg_data[i] = NULL; + } + return -ENOMEM; + } + } + } + + cx->vbi.insert_mpeg = fmt; + + if (cx->vbi.insert_mpeg == 0) + return 0; + /* Need sliced data for mpeg insertion */ + if (cx18_get_service_set(cx->vbi.sliced_in) == 0) { + if (cx->is_60hz) + cx->vbi.sliced_in->service_set = V4L2_SLICED_CAPTION_525; + else + cx->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625; + cx18_expand_service_set(cx->vbi.sliced_in, cx->is_50hz); + } + return 0; +} + +int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) +{ + struct v4l2_control ctrl; + + switch (cmd) { + case VIDIOC_QUERYMENU: + CX18_DEBUG_IOCTL("VIDIOC_QUERYMENU\n"); + return cx18_querymenu(cx, arg); + + case VIDIOC_QUERYCTRL: + return cx18_queryctrl(cx, arg); + + case VIDIOC_S_CTRL: + return cx18_s_ctrl(cx, arg); + + case VIDIOC_G_CTRL: + return cx18_g_ctrl(cx, arg); + + case VIDIOC_S_EXT_CTRLS: + { + struct v4l2_ext_controls *c = arg; + + if (c->ctrl_class == V4L2_CTRL_CLASS_USER) { + int i; + int err = 0; + + for (i = 0; i < c->count; i++) { + ctrl.id = c->controls[i].id; + ctrl.value = c->controls[i].value; + err = cx18_s_ctrl(cx, &ctrl); + c->controls[i].value = ctrl.value; + if (err) { + c->error_idx = i; + break; + } + } + return err; + } + CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n"); + if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + struct cx2341x_mpeg_params p = cx->params; + int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd); + + if (err) + return err; + + if (p.video_encoding != cx->params.video_encoding) { + int is_mpeg1 = p.video_encoding == + V4L2_MPEG_VIDEO_ENCODING_MPEG_1; + struct v4l2_format fmt; + + /* fix videodecoder resolution */ + fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + fmt.fmt.pix.width = cx->params.width / (is_mpeg1 ? 2 : 1); + fmt.fmt.pix.height = cx->params.height; + cx18_av_cmd(cx, VIDIOC_S_FMT, &fmt); + } + err = cx2341x_update(cx, cx18_api_func, &cx->params, &p); + if (!err && cx->params.stream_vbi_fmt != p.stream_vbi_fmt) + err = cx18_setup_vbi_fmt(cx, p.stream_vbi_fmt); + cx->params = p; + cx->dualwatch_stereo_mode = p.audio_properties & 0x0300; + cx18_audio_set_audio_clock_freq(cx, p.audio_properties & 0x03); + return err; + } + return -EINVAL; + } + + case VIDIOC_G_EXT_CTRLS: + { + struct v4l2_ext_controls *c = arg; + + if (c->ctrl_class == V4L2_CTRL_CLASS_USER) { + int i; + int err = 0; + + for (i = 0; i < c->count; i++) { + ctrl.id = c->controls[i].id; + ctrl.value = c->controls[i].value; + err = cx18_g_ctrl(cx, &ctrl); + c->controls[i].value = ctrl.value; + if (err) { + c->error_idx = i; + break; + } + } + return err; + } + CX18_DEBUG_IOCTL("VIDIOC_G_EXT_CTRLS\n"); + if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) + return cx2341x_ext_ctrls(&cx->params, 0, arg, cmd); + return -EINVAL; + } + + case VIDIOC_TRY_EXT_CTRLS: + { + struct v4l2_ext_controls *c = arg; + + CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n"); + if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) + return cx2341x_ext_ctrls(&cx->params, + atomic_read(&cx->ana_capturing), arg, cmd); + return -EINVAL; + } + + default: + return -EINVAL; + } + return 0; +} diff --git a/drivers/media/video/cx18/cx18-controls.h b/drivers/media/video/cx18/cx18-controls.h new file mode 100644 index 00000000000..6e985cf422a --- /dev/null +++ b/drivers/media/video/cx18/cx18-controls.h @@ -0,0 +1,24 @@ +/* + * cx18 ioctl control functions + * + * Derived from ivtv-controls.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c new file mode 100644 index 00000000000..2b810bb2a4c --- /dev/null +++ b/drivers/media/video/cx18/cx18-driver.c @@ -0,0 +1,962 @@ +/* + * cx18 driver initialization and card probing + * + * Derived from ivtv-driver.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-version.h" +#include "cx18-cards.h" +#include "cx18-i2c.h" +#include "cx18-irq.h" +#include "cx18-gpio.h" +#include "cx18-firmware.h" +#include "cx18-streams.h" +#include "cx18-av-core.h" +#include "cx18-scb.h" +#include "cx18-mailbox.h" +#include "cx18-ioctl.h" +#include "tuner-xc2028.h" + +#include <media/tveeprom.h> + + +/* var to keep track of the number of array elements in use */ +int cx18_cards_active; + +/* If you have already X v4l cards, then set this to X. This way + the device numbers stay matched. Example: you have a WinTV card + without radio and a Compro H900 with. Normally this would give a + video1 device together with a radio0 device for the Compro. By + setting this to 1 you ensure that radio0 is now also radio1. */ +int cx18_first_minor; + +/* Master variable for all cx18 info */ +struct cx18 *cx18_cards[CX18_MAX_CARDS]; + +/* Protects cx18_cards_active */ +DEFINE_SPINLOCK(cx18_cards_lock); + +/* add your revision and whatnot here */ +static struct pci_device_id cx18_pci_tbl[] __devinitdata = { + {PCI_VENDOR_ID_CX, PCI_DEVICE_ID_CX23418, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, cx18_pci_tbl); + +/* Parameter declarations */ +static int cardtype[CX18_MAX_CARDS]; +static int tuner[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; + +static int cardtype_c = 1; +static int tuner_c = 1; +static int radio_c = 1; +static char pal[] = "--"; +static char secam[] = "--"; +static char ntsc[] = "-"; + +/* Buffers */ +static int enc_mpg_buffers = CX18_DEFAULT_ENC_MPG_BUFFERS; +static int enc_ts_buffers = CX18_DEFAULT_ENC_TS_BUFFERS; +static int enc_yuv_buffers = CX18_DEFAULT_ENC_YUV_BUFFERS; +static int enc_vbi_buffers = CX18_DEFAULT_ENC_VBI_BUFFERS; +static int enc_pcm_buffers = CX18_DEFAULT_ENC_PCM_BUFFERS; + +static int cx18_pci_latency = 1; + +int cx18_debug; + +module_param_array(tuner, int, &tuner_c, 0644); +module_param_array(radio, bool, &radio_c, 0644); +module_param_array(cardtype, int, &cardtype_c, 0644); +module_param_string(pal, pal, sizeof(pal), 0644); +module_param_string(secam, secam, sizeof(secam), 0644); +module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); +module_param_named(debug, cx18_debug, int, 0644); +module_param(cx18_pci_latency, int, 0644); +module_param(cx18_first_minor, int, 0644); + +module_param(enc_mpg_buffers, int, 0644); +module_param(enc_ts_buffers, int, 0644); +module_param(enc_yuv_buffers, int, 0644); +module_param(enc_vbi_buffers, int, 0644); +module_param(enc_pcm_buffers, int, 0644); + +MODULE_PARM_DESC(tuner, "Tuner type selection,\n" + "\t\t\tsee tuner.h for values"); +MODULE_PARM_DESC(radio, + "Enable or disable the radio. Use only if autodetection\n" + "\t\t\tfails. 0 = disable, 1 = enable"); +MODULE_PARM_DESC(cardtype, + "Only use this option if your card is not detected properly.\n" + "\t\tSpecify card type:\n" + "\t\t\t 1 = Hauppauge HVR 1600 (ESMT memory)\n" + "\t\t\t 2 = Hauppauge HVR 1600 (Samsung memory)\n" + "\t\t\t 3 = Compro VideoMate H900\n" + "\t\t\t 4 = Yuan MPC718\n" + "\t\t\t 0 = Autodetect (default)\n" + "\t\t\t-1 = Ignore this card\n\t\t"); +MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); +MODULE_PARM_DESC(secam, "Set SECAM standard: B, G, H, D, K, L, LC"); +MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J, K"); +MODULE_PARM_DESC(debug, + "Debug level (bitmask). Default: 0\n" + "\t\t\t 1/0x0001: warning\n" + "\t\t\t 2/0x0002: info\n" + "\t\t\t 4/0x0004: mailbox\n" + "\t\t\t 8/0x0008: dma\n" + "\t\t\t 16/0x0010: ioctl\n" + "\t\t\t 32/0x0020: file\n" + "\t\t\t 64/0x0040: i2c\n" + "\t\t\t128/0x0080: irq\n" + "\t\t\t256/0x0100: high volume\n"); +MODULE_PARM_DESC(cx18_pci_latency, + "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" + "\t\t\tDefault: Yes"); +MODULE_PARM_DESC(enc_mpg_buffers, + "Encoder MPG Buffers (in MB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS)); +MODULE_PARM_DESC(enc_ts_buffers, + "Encoder TS Buffers (in MB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_TS_BUFFERS)); +MODULE_PARM_DESC(enc_yuv_buffers, + "Encoder YUV Buffers (in MB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFFERS)); +MODULE_PARM_DESC(enc_vbi_buffers, + "Encoder VBI Buffers (in MB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_VBI_BUFFERS)); +MODULE_PARM_DESC(enc_pcm_buffers, + "Encoder PCM buffers (in MB)\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFFERS)); + +MODULE_PARM_DESC(cx18_first_minor, "Set minor assigned to first card"); + +MODULE_AUTHOR("Hans Verkuil"); +MODULE_DESCRIPTION("CX23418 driver"); +MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder"); +MODULE_LICENSE("GPL"); + +MODULE_VERSION(CX18_VERSION); + +/* Generic utility functions */ +int cx18_msleep_timeout(unsigned int msecs, int intr) +{ + int timeout = msecs_to_jiffies(msecs); + int sig; + + do { + set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); + timeout = schedule_timeout(timeout); + sig = intr ? signal_pending(current) : 0; + } while (!sig && timeout); + return sig; +} + +/* Release ioremapped memory */ +static void cx18_iounmap(struct cx18 *cx) +{ + if (cx == NULL) + return; + + /* Release io memory */ + if (cx->enc_mem != NULL) { + CX18_DEBUG_INFO("releasing enc_mem\n"); + iounmap(cx->enc_mem); + cx->enc_mem = NULL; + } +} + +/* Hauppauge card? get values from tveeprom */ +void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv) +{ + u8 eedata[256]; + + cx->i2c_client[0].addr = 0xA0 >> 1; + tveeprom_read(&cx->i2c_client[0], eedata, sizeof(eedata)); + tveeprom_hauppauge_analog(&cx->i2c_client[0], tv, eedata); +} + +static void cx18_process_eeprom(struct cx18 *cx) +{ + struct tveeprom tv; + + cx18_read_eeprom(cx, &tv); + + /* Many thanks to Steven Toth from Hauppauge for providing the + model numbers */ + /* Note: the Samsung memory models cannot be reliably determined + from the model number. Use the cardtype module option if you + have one of these preproduction models. */ + switch (tv.model) { + case 74000 ... 74999: + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + break; + case 0: + CX18_ERR("Invalid EEPROM\n"); + return; + default: + CX18_ERR("Unknown model %d, defaulting to HVR-1600\n", tv.model); + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + break; + } + + cx->v4l2_cap = cx->card->v4l2_capabilities; + cx->card_name = cx->card->name; + cx->card_i2c = cx->card->i2c; + + CX18_INFO("Autodetected %s\n", cx->card_name); + + if (tv.tuner_type == TUNER_ABSENT) + CX18_ERR("tveeprom cannot autodetect tuner!"); + + if (cx->options.tuner == -1) + cx->options.tuner = tv.tuner_type; + if (cx->options.radio == -1) + cx->options.radio = (tv.has_radio != 0); + + if (cx->std != 0) + /* user specified tuner standard */ + return; + + /* autodetect tuner standard */ + if (tv.tuner_formats & V4L2_STD_PAL) { + CX18_DEBUG_INFO("PAL tuner detected\n"); + cx->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H; + } else if (tv.tuner_formats & V4L2_STD_NTSC) { + CX18_DEBUG_INFO("NTSC tuner detected\n"); + cx->std |= V4L2_STD_NTSC_M; + } else if (tv.tuner_formats & V4L2_STD_SECAM) { + CX18_DEBUG_INFO("SECAM tuner detected\n"); + cx->std |= V4L2_STD_SECAM_L; + } else { + CX18_INFO("No tuner detected, default to NTSC-M\n"); + cx->std |= V4L2_STD_NTSC_M; + } +} + +static v4l2_std_id cx18_parse_std(struct cx18 *cx) +{ + switch (pal[0]) { + case '6': + return V4L2_STD_PAL_60; + case 'b': + case 'B': + case 'g': + case 'G': + return V4L2_STD_PAL_BG; + case 'h': + case 'H': + return V4L2_STD_PAL_H; + case 'n': + case 'N': + if (pal[1] == 'c' || pal[1] == 'C') + return V4L2_STD_PAL_Nc; + return V4L2_STD_PAL_N; + case 'i': + case 'I': + return V4L2_STD_PAL_I; + case 'd': + case 'D': + case 'k': + case 'K': + return V4L2_STD_PAL_DK; + case 'M': + case 'm': + return V4L2_STD_PAL_M; + case '-': + break; + default: + CX18_WARN("pal= argument not recognised\n"); + return 0; + } + + switch (secam[0]) { + case 'b': + case 'B': + case 'g': + case 'G': + case 'h': + case 'H': + return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H; + case 'd': + case 'D': + case 'k': + case 'K': + return V4L2_STD_SECAM_DK; + case 'l': + case 'L': + if (secam[1] == 'C' || secam[1] == 'c') + return V4L2_STD_SECAM_LC; + return V4L2_STD_SECAM_L; + case '-': + break; + default: + CX18_WARN("secam= argument not recognised\n"); + return 0; + } + + switch (ntsc[0]) { + case 'm': + case 'M': + return V4L2_STD_NTSC_M; + case 'j': + case 'J': + return V4L2_STD_NTSC_M_JP; + case 'k': + case 'K': + return V4L2_STD_NTSC_M_KR; + case '-': + break; + default: + CX18_WARN("ntsc= argument not recognised\n"); + return 0; + } + + /* no match found */ + return 0; +} + +static void cx18_process_options(struct cx18 *cx) +{ + int i, j; + + cx->options.megabytes[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_TS] = enc_ts_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers; + cx->options.megabytes[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers; + cx->options.cardtype = cardtype[cx->num]; + cx->options.tuner = tuner[cx->num]; + cx->options.radio = radio[cx->num]; + + cx->std = cx18_parse_std(cx); + if (cx->options.cardtype == -1) { + CX18_INFO("Ignore card\n"); + return; + } + cx->card = cx18_get_card(cx->options.cardtype - 1); + if (cx->card) + CX18_INFO("User specified %s card\n", cx->card->name); + else if (cx->options.cardtype != 0) + CX18_ERR("Unknown user specified type, trying to autodetect card\n"); + if (cx->card == NULL) { + if (cx->dev->subsystem_vendor == CX18_PCI_ID_HAUPPAUGE) { + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + CX18_INFO("Autodetected Hauppauge card\n"); + } + } + if (cx->card == NULL) { + for (i = 0; (cx->card = cx18_get_card(i)); i++) { + if (cx->card->pci_list == NULL) + continue; + for (j = 0; cx->card->pci_list[j].device; j++) { + if (cx->dev->device != + cx->card->pci_list[j].device) + continue; + if (cx->dev->subsystem_vendor != + cx->card->pci_list[j].subsystem_vendor) + continue; + if (cx->dev->subsystem_device != + cx->card->pci_list[j].subsystem_device) + continue; + CX18_INFO("Autodetected %s card\n", cx->card->name); + goto done; + } + } + } +done: + + if (cx->card == NULL) { + cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); + CX18_ERR("Unknown card: vendor/device: %04x/%04x\n", + cx->dev->vendor, cx->dev->device); + CX18_ERR(" subsystem vendor/device: %04x/%04x\n", + cx->dev->subsystem_vendor, cx->dev->subsystem_device); + CX18_ERR("Defaulting to %s card\n", cx->card->name); + CX18_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n"); + CX18_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n"); + CX18_ERR("Prefix your subject line with [UNKNOWN CX18 CARD].\n"); + } + cx->v4l2_cap = cx->card->v4l2_capabilities; + cx->card_name = cx->card->name; + cx->card_i2c = cx->card->i2c; +} + +/* Precondition: the cx18 structure has been memset to 0. Only + the dev and num fields have been filled in. + No assumptions on the card type may be made here (see cx18_init_struct2 + for that). + */ +static int __devinit cx18_init_struct1(struct cx18 *cx) +{ + cx->base_addr = pci_resource_start(cx->dev, 0); + + mutex_init(&cx->serialize_lock); + mutex_init(&cx->i2c_bus_lock[0]); + mutex_init(&cx->i2c_bus_lock[1]); + + spin_lock_init(&cx->lock); + spin_lock_init(&cx->dma_reg_lock); + + /* start counting open_id at 1 */ + cx->open_id = 1; + + /* Initial settings */ + cx2341x_fill_defaults(&cx->params); + cx->temporal_strength = cx->params.video_temporal_filter; + cx->spatial_strength = cx->params.video_spatial_filter; + cx->filter_mode = cx->params.video_spatial_filter_mode | + (cx->params.video_temporal_filter_mode << 1) | + (cx->params.video_median_filter_type << 2); + cx->params.port = CX2341X_PORT_MEMORY; + cx->params.capabilities = CX2341X_CAP_HAS_SLICED_VBI; + init_waitqueue_head(&cx->cap_w); + init_waitqueue_head(&cx->mb_apu_waitq); + init_waitqueue_head(&cx->mb_cpu_waitq); + init_waitqueue_head(&cx->mb_epu_waitq); + init_waitqueue_head(&cx->mb_hpu_waitq); + init_waitqueue_head(&cx->dma_waitq); + + /* VBI */ + cx->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + cx->vbi.sliced_in = &cx->vbi.in.fmt.sliced; + cx->vbi.raw_size = 1456; + cx->vbi.raw_decoder_line_size = 1456; + cx->vbi.raw_decoder_sav_odd_field = 0x20; + cx->vbi.raw_decoder_sav_even_field = 0x60; + cx->vbi.sliced_decoder_line_size = 272; + cx->vbi.sliced_decoder_sav_odd_field = 0xB0; + cx->vbi.sliced_decoder_sav_even_field = 0xF0; + return 0; +} + +/* Second initialization part. Here the card type has been + autodetected. */ +static void __devinit cx18_init_struct2(struct cx18 *cx) +{ + int i; + + for (i = 0; i < CX18_CARD_MAX_VIDEO_INPUTS; i++) + if (cx->card->video_inputs[i].video_type == 0) + break; + cx->nof_inputs = i; + for (i = 0; i < CX18_CARD_MAX_AUDIO_INPUTS; i++) + if (cx->card->audio_inputs[i].audio_type == 0) + break; + cx->nof_audio_inputs = i; + + /* Find tuner input */ + for (i = 0; i < cx->nof_inputs; i++) { + if (cx->card->video_inputs[i].video_type == + CX18_CARD_INPUT_VID_TUNER) + break; + } + if (i == cx->nof_inputs) + i = 0; + cx->active_input = i; + cx->audio_input = cx->card->video_inputs[i].audio_index; + cx->av_state.vid_input = CX18_AV_COMPOSITE7; + cx->av_state.aud_input = CX18_AV_AUDIO8; + cx->av_state.audclk_freq = 48000; + cx->av_state.audmode = V4L2_TUNER_MODE_LANG1; + cx->av_state.vbi_line_offset = 8; +} + +static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *dev, + const struct pci_device_id *pci_id) +{ + u16 cmd; + unsigned char pci_latency; + + CX18_DEBUG_INFO("Enabling pci device\n"); + + if (pci_enable_device(dev)) { + CX18_ERR("Can't enable device %d!\n", cx->num); + return -EIO; + } + if (pci_set_dma_mask(dev, 0xffffffff)) { + CX18_ERR("No suitable DMA available on card %d.\n", cx->num); + return -EIO; + } + if (!request_mem_region(cx->base_addr, CX18_MEM_SIZE, "cx18 encoder")) { + CX18_ERR("Cannot request encoder memory region on card %d.\n", cx->num); + return -EIO; + } + + /* Check for bus mastering */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_read_config_byte(dev, PCI_CLASS_REVISION, &cx->card_rev); + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &pci_latency); + + if (pci_latency < 64 && cx18_pci_latency) { + CX18_INFO("Unreasonably low latency timer, " + "setting to 64 (was %d)\n", pci_latency); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &pci_latency); + } + /* This config space value relates to DMA latencies. The + default value 0x8080 is too low however and will lead + to DMA errors. 0xffff is the max value which solves + these problems. */ + pci_write_config_dword(dev, 0x40, 0xffff); + + CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " + "irq: %d, latency: %d, memory: 0x%lx\n", + cx->dev->device, cx->card_rev, dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), + cx->dev->irq, pci_latency, (unsigned long)cx->base_addr); + + return 0; +} + +#ifdef MODULE +static u32 cx18_request_module(struct cx18 *cx, u32 hw, + const char *name, u32 id) +{ + if ((hw & id) == 0) + return hw; + if (request_module(name) != 0) { + CX18_ERR("Failed to load module %s\n", name); + return hw & ~id; + } + CX18_DEBUG_INFO("Loaded module %s\n", name); + return hw; +} +#endif + +static void cx18_load_and_init_modules(struct cx18 *cx) +{ + u32 hw = cx->card->hw_all; + int i; + +#ifdef MODULE + /* load modules */ +#ifndef CONFIG_MEDIA_TUNER + hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER); +#endif +#ifndef CONFIG_VIDEO_CS5345 + hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345); +#endif +#endif + + /* check which i2c devices are actually found */ + for (i = 0; i < 32; i++) { + u32 device = 1 << i; + + if (!(device & hw)) + continue; + if (device == CX18_HW_GPIO || device == CX18_HW_TVEEPROM || + device == CX18_HW_CX23418 || device == CX18_HW_DVB) { + /* These 'devices' do not use i2c probing */ + cx->hw_flags |= device; + continue; + } + cx18_i2c_register(cx, i); + if (cx18_i2c_hw_addr(cx, device) > 0) + cx->hw_flags |= device; + } + + hw = cx->hw_flags; +} + +static int __devinit cx18_probe(struct pci_dev *dev, + const struct pci_device_id *pci_id) +{ + int retval = 0; + int vbi_buf_size; + u32 devtype; + struct cx18 *cx; + + spin_lock(&cx18_cards_lock); + + /* Make sure we've got a place for this card */ + if (cx18_cards_active == CX18_MAX_CARDS) { + printk(KERN_ERR "cx18: Maximum number of cards detected (%d).\n", + cx18_cards_active); + spin_unlock(&cx18_cards_lock); + return -ENOMEM; + } + + cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC); + if (!cx) { + spin_unlock(&cx18_cards_lock); + return -ENOMEM; + } + cx18_cards[cx18_cards_active] = cx; + cx->dev = dev; + cx->num = cx18_cards_active++; + snprintf(cx->name, sizeof(cx->name) - 1, "cx18-%d", cx->num); + CX18_INFO("Initializing card #%d\n", cx->num); + + spin_unlock(&cx18_cards_lock); + + cx18_process_options(cx); + if (cx->options.cardtype == -1) { + retval = -ENODEV; + goto err; + } + if (cx18_init_struct1(cx)) { + retval = -ENOMEM; + goto err; + } + + CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr); + + /* PCI Device Setup */ + retval = cx18_setup_pci(cx, dev, pci_id); + if (retval != 0) { + if (retval == -EIO) + goto free_workqueue; + else if (retval == -ENXIO) + goto free_mem; + } + /* save cx in the pci struct for later use */ + pci_set_drvdata(dev, cx); + + /* map io memory */ + CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", + cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); + cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET, + CX18_MEM_SIZE); + if (!cx->enc_mem) { + CX18_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n"); + CX18_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n"); + retval = -ENOMEM; + goto free_mem; + } + cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET; + devtype = read_reg(0xC72028); + switch (devtype & 0xff000000) { + case 0xff000000: + CX18_INFO("cx23418 revision %08x (A)\n", devtype); + break; + case 0x01000000: + CX18_INFO("cx23418 revision %08x (B)\n", devtype); + break; + default: + CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype); + break; + } + + cx18_init_power(cx, 1); + cx18_init_memory(cx); + + cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET); + cx18_init_scb(cx); + + cx18_gpio_init(cx); + + /* active i2c */ + CX18_DEBUG_INFO("activating i2c...\n"); + if (init_cx18_i2c(cx)) { + CX18_ERR("Could not initialize i2c\n"); + goto free_map; + } + + CX18_DEBUG_INFO("Active card count: %d.\n", cx18_cards_active); + + if (cx->card->hw_all & CX18_HW_TVEEPROM) { + /* Based on the model number the cardtype may be changed. + The PCI IDs are not always reliable. */ + cx18_process_eeprom(cx); + } + if (cx->card->comment) + CX18_INFO("%s", cx->card->comment); + if (cx->card->v4l2_capabilities == 0) { + retval = -ENODEV; + goto free_i2c; + } + cx18_init_memory(cx); + + /* Register IRQ */ + retval = request_irq(cx->dev->irq, cx18_irq_handler, + IRQF_SHARED | IRQF_DISABLED, cx->name, (void *)cx); + if (retval) { + CX18_ERR("Failed to register irq %d\n", retval); + goto free_i2c; + } + + if (cx->std == 0) + cx->std = V4L2_STD_NTSC_M; + + if (cx->options.tuner == -1) { + int i; + + for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) { + if ((cx->std & cx->card->tuners[i].std) == 0) + continue; + cx->options.tuner = cx->card->tuners[i].tuner; + break; + } + } + /* if no tuner was found, then pick the first tuner in the card list */ + if (cx->options.tuner == -1 && cx->card->tuners[0].std) { + cx->std = cx->card->tuners[0].std; + cx->options.tuner = cx->card->tuners[0].tuner; + } + if (cx->options.radio == -1) + cx->options.radio = (cx->card->radio_input.audio_type != 0); + + /* The card is now fully identified, continue with card-specific + initialization. */ + cx18_init_struct2(cx); + + cx18_load_and_init_modules(cx); + + if (cx->std & V4L2_STD_525_60) { + cx->is_60hz = 1; + cx->is_out_60hz = 1; + } else { + cx->is_50hz = 1; + cx->is_out_50hz = 1; + } + cx->params.video_gop_size = cx->is_60hz ? 15 : 12; + + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_MPG] = 0x08000; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_TS] = 0x08000; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_PCM] = 0x01200; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_YUV] = 0x20000; + vbi_buf_size = cx->vbi.raw_size * (cx->is_60hz ? 24 : 36) / 2; + cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = vbi_buf_size; + + if (cx->options.radio > 0) + cx->v4l2_cap |= V4L2_CAP_RADIO; + + if (cx->options.tuner > -1) { + struct tuner_setup setup; + + setup.addr = ADDR_UNSET; + setup.type = cx->options.tuner; + setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */ + setup.tuner_callback = (setup.type == TUNER_XC2028) ? + cx18_reset_tuner_gpio : NULL; + cx18_call_i2c_clients(cx, TUNER_SET_TYPE_ADDR, &setup); + if (setup.type == TUNER_XC2028) { + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + }; + struct v4l2_priv_tun_config cfg = { + .tuner = cx->options.tuner, + .priv = &ctrl, + }; + cx18_call_i2c_clients(cx, TUNER_SET_CONFIG, &cfg); + } + } + + /* The tuner is fixed to the standard. The other inputs (e.g. S-Video) + are not. */ + cx->tuner_std = cx->std; + + retval = cx18_streams_setup(cx); + if (retval) { + CX18_ERR("Error %d setting up streams\n", retval); + goto free_irq; + } + retval = cx18_streams_register(cx); + if (retval) { + CX18_ERR("Error %d registering devices\n", retval); + goto free_streams; + } + + CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name); + + return 0; + +free_streams: + cx18_streams_cleanup(cx, 1); +free_irq: + free_irq(cx->dev->irq, (void *)cx); +free_i2c: + exit_cx18_i2c(cx); +free_map: + cx18_iounmap(cx); +free_mem: + release_mem_region(cx->base_addr, CX18_MEM_SIZE); +free_workqueue: +err: + if (retval == 0) + retval = -ENODEV; + CX18_ERR("Error %d on initialization\n", retval); + + kfree(cx18_cards[cx18_cards_active]); + cx18_cards[cx18_cards_active] = NULL; + return retval; +} + +int cx18_init_on_first_open(struct cx18 *cx) +{ + int video_input; + int fw_retry_count = 3; + struct v4l2_frequency vf; + + if (test_bit(CX18_F_I_FAILED, &cx->i_flags)) + return -ENXIO; + + if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags)) + return 0; + + while (--fw_retry_count > 0) { + /* load firmware */ + if (cx18_firmware_init(cx) == 0) + break; + if (fw_retry_count > 1) + CX18_WARN("Retry loading firmware\n"); + } + + if (fw_retry_count == 0) { + set_bit(CX18_F_I_FAILED, &cx->i_flags); + return -ENXIO; + } + set_bit(CX18_F_I_LOADED_FW, &cx->i_flags); + + /* Init the firmware twice to work around a silicon bug + * transport related. */ + + fw_retry_count = 3; + while (--fw_retry_count > 0) { + /* load firmware */ + if (cx18_firmware_init(cx) == 0) + break; + if (fw_retry_count > 1) + CX18_WARN("Retry loading firmware\n"); + } + + if (fw_retry_count == 0) { + set_bit(CX18_F_I_FAILED, &cx->i_flags); + return -ENXIO; + } + + vf.tuner = 0; + vf.type = V4L2_TUNER_ANALOG_TV; + vf.frequency = 6400; /* the tuner 'baseline' frequency */ + + /* Set initial frequency. For PAL/SECAM broadcasts no + 'default' channel exists AFAIK. */ + if (cx->std == V4L2_STD_NTSC_M_JP) + vf.frequency = 1460; /* ch. 1 91250*16/1000 */ + else if (cx->std & V4L2_STD_NTSC_M) + vf.frequency = 1076; /* ch. 4 67250*16/1000 */ + + video_input = cx->active_input; + cx->active_input++; /* Force update of input */ + cx18_v4l2_ioctls(cx, NULL, VIDIOC_S_INPUT, &video_input); + + /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code + in one place. */ + cx->std++; /* Force full standard initialization */ + cx18_v4l2_ioctls(cx, NULL, VIDIOC_S_STD, &cx->tuner_std); + cx18_v4l2_ioctls(cx, NULL, VIDIOC_S_FREQUENCY, &vf); + return 0; +} + +static void cx18_remove(struct pci_dev *pci_dev) +{ + struct cx18 *cx = pci_get_drvdata(pci_dev); + + CX18_DEBUG_INFO("Removing Card #%d\n", cx->num); + + /* Stop all captures */ + CX18_DEBUG_INFO("Stopping all streams\n"); + if (atomic_read(&cx->tot_capturing) > 0) + cx18_stop_all_captures(cx); + + /* Interrupts */ + sw1_irq_disable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + sw2_irq_disable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + + cx18_halt_firmware(cx); + + cx18_streams_cleanup(cx, 1); + + exit_cx18_i2c(cx); + + free_irq(cx->dev->irq, (void *)cx); + + cx18_iounmap(cx); + + release_mem_region(cx->base_addr, CX18_MEM_SIZE); + + pci_disable_device(cx->dev); + + CX18_INFO("Removed %s, card #%d\n", cx->card_name, cx->num); +} + +/* define a pci_driver for card detection */ +static struct pci_driver cx18_pci_driver = { + .name = "cx18", + .id_table = cx18_pci_tbl, + .probe = cx18_probe, + .remove = cx18_remove, +}; + +static int module_start(void) +{ + printk(KERN_INFO "cx18: Start initialization, version %s\n", CX18_VERSION); + + memset(cx18_cards, 0, sizeof(cx18_cards)); + + /* Validate parameters */ + if (cx18_first_minor < 0 || cx18_first_minor >= CX18_MAX_CARDS) { + printk(KERN_ERR "cx18: Exiting, ivtv_first_minor must be between 0 and %d\n", + CX18_MAX_CARDS - 1); + return -1; + } + + if (cx18_debug < 0 || cx18_debug > 511) { + cx18_debug = 0; + printk(KERN_INFO "cx18: Debug value must be >= 0 and <= 511!\n"); + } + + if (pci_register_driver(&cx18_pci_driver)) { + printk(KERN_ERR "cx18: Error detecting PCI card\n"); + return -ENODEV; + } + printk(KERN_INFO "cx18: End initialization\n"); + return 0; +} + +static void module_cleanup(void) +{ + int i; + + pci_unregister_driver(&cx18_pci_driver); + + for (i = 0; i < cx18_cards_active; i++) { + if (cx18_cards[i] == NULL) + continue; + kfree(cx18_cards[i]); + } +} + +module_init(module_start); +module_exit(module_cleanup); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h new file mode 100644 index 00000000000..de14ab59a20 --- /dev/null +++ b/drivers/media/video/cx18/cx18-driver.h @@ -0,0 +1,502 @@ +/* + * cx18 driver internal defines and structures + * + * Derived from ivtv-driver.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_DRIVER_H +#define CX18_DRIVER_H + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/list.h> +#include <linux/unistd.h> +#include <linux/byteorder/swab.h> +#include <linux/pagemap.h> +#include <linux/workqueue.h> +#include <linux/mutex.h> + +#include <linux/dvb/video.h> +#include <linux/dvb/audio.h> +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include "cx18-mailbox.h" +#include "cx18-av-core.h" +#include "cx23418.h" + +/* DVB */ +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" + +#ifndef CONFIG_PCI +# error "This driver requires kernel PCI support." +#endif + +#define CX18_MEM_OFFSET 0x00000000 +#define CX18_MEM_SIZE 0x04000000 +#define CX18_REG_OFFSET 0x02000000 + +/* Maximum cx18 driver instances. */ +#define CX18_MAX_CARDS 32 + +/* Supported cards */ +#define CX18_CARD_HVR_1600_ESMT 0 /* Hauppauge HVR 1600 (ESMT memory) */ +#define CX18_CARD_HVR_1600_SAMSUNG 1 /* Hauppauge HVR 1600 (Samsung memory) */ +#define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */ +#define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */ +#define CX18_CARD_LAST 3 + +#define CX18_ENC_STREAM_TYPE_MPG 0 +#define CX18_ENC_STREAM_TYPE_TS 1 +#define CX18_ENC_STREAM_TYPE_YUV 2 +#define CX18_ENC_STREAM_TYPE_VBI 3 +#define CX18_ENC_STREAM_TYPE_PCM 4 +#define CX18_ENC_STREAM_TYPE_IDX 5 +#define CX18_ENC_STREAM_TYPE_RAD 6 +#define CX18_MAX_STREAMS 7 + +/* system vendor and device IDs */ +#define PCI_VENDOR_ID_CX 0x14f1 +#define PCI_DEVICE_ID_CX23418 0x5b7a + +/* subsystem vendor ID */ +#define CX18_PCI_ID_HAUPPAUGE 0x0070 +#define CX18_PCI_ID_COMPRO 0x185b +#define CX18_PCI_ID_YUAN 0x12ab + +/* ======================================================================== */ +/* ========================== START USER SETTABLE DMA VARIABLES =========== */ +/* ======================================================================== */ + +/* DMA Buffers, Default size in MB allocated */ +#define CX18_DEFAULT_ENC_TS_BUFFERS 1 +#define CX18_DEFAULT_ENC_MPG_BUFFERS 2 +#define CX18_DEFAULT_ENC_IDX_BUFFERS 1 +#define CX18_DEFAULT_ENC_YUV_BUFFERS 2 +#define CX18_DEFAULT_ENC_VBI_BUFFERS 1 +#define CX18_DEFAULT_ENC_PCM_BUFFERS 1 + +/* i2c stuff */ +#define I2C_CLIENTS_MAX 16 + +/* debugging */ + +/* Flag to turn on high volume debugging */ +#define CX18_DBGFLG_WARN (1 << 0) +#define CX18_DBGFLG_INFO (1 << 1) +#define CX18_DBGFLG_API (1 << 2) +#define CX18_DBGFLG_DMA (1 << 3) +#define CX18_DBGFLG_IOCTL (1 << 4) +#define CX18_DBGFLG_FILE (1 << 5) +#define CX18_DBGFLG_I2C (1 << 6) +#define CX18_DBGFLG_IRQ (1 << 7) +/* Flag to turn on high volume debugging */ +#define CX18_DBGFLG_HIGHVOL (1 << 8) + +/* NOTE: extra space before comma in 'cx->num , ## args' is required for + gcc-2.95, otherwise it won't compile. */ +#define CX18_DEBUG(x, type, fmt, args...) \ + do { \ + if ((x) & cx18_debug) \ + printk(KERN_INFO "cx18-%d " type ": " fmt, cx->num , ## args); \ + } while (0) +#define CX18_DEBUG_WARN(fmt, args...) CX18_DEBUG(CX18_DBGFLG_WARN, "warning", fmt , ## args) +#define CX18_DEBUG_INFO(fmt, args...) CX18_DEBUG(CX18_DBGFLG_INFO, "info", fmt , ## args) +#define CX18_DEBUG_API(fmt, args...) CX18_DEBUG(CX18_DBGFLG_API, "api", fmt , ## args) +#define CX18_DEBUG_DMA(fmt, args...) CX18_DEBUG(CX18_DBGFLG_DMA, "dma", fmt , ## args) +#define CX18_DEBUG_IOCTL(fmt, args...) CX18_DEBUG(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args) +#define CX18_DEBUG_FILE(fmt, args...) CX18_DEBUG(CX18_DBGFLG_FILE, "file", fmt , ## args) +#define CX18_DEBUG_I2C(fmt, args...) CX18_DEBUG(CX18_DBGFLG_I2C, "i2c", fmt , ## args) +#define CX18_DEBUG_IRQ(fmt, args...) CX18_DEBUG(CX18_DBGFLG_IRQ, "irq", fmt , ## args) + +#define CX18_DEBUG_HIGH_VOL(x, type, fmt, args...) \ + do { \ + if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \ + printk(KERN_INFO "cx18%d " type ": " fmt, cx->num , ## args); \ + } while (0) +#define CX18_DEBUG_HI_WARN(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_WARN, "warning", fmt , ## args) +#define CX18_DEBUG_HI_INFO(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_INFO, "info", fmt , ## args) +#define CX18_DEBUG_HI_API(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_API, "api", fmt , ## args) +#define CX18_DEBUG_HI_DMA(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_DMA, "dma", fmt , ## args) +#define CX18_DEBUG_HI_IOCTL(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args) +#define CX18_DEBUG_HI_FILE(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_FILE, "file", fmt , ## args) +#define CX18_DEBUG_HI_I2C(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_I2C, "i2c", fmt , ## args) +#define CX18_DEBUG_HI_IRQ(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IRQ, "irq", fmt , ## args) + +/* Standard kernel messages */ +#define CX18_ERR(fmt, args...) printk(KERN_ERR "cx18-%d: " fmt, cx->num , ## args) +#define CX18_WARN(fmt, args...) printk(KERN_WARNING "cx18-%d: " fmt, cx->num , ## args) +#define CX18_INFO(fmt, args...) printk(KERN_INFO "cx18-%d: " fmt, cx->num , ## args) + +/* Values for CX18_API_DEC_PLAYBACK_SPEED mpeg_frame_type_mask parameter: */ +#define MPEG_FRAME_TYPE_IFRAME 1 +#define MPEG_FRAME_TYPE_IFRAME_PFRAME 3 +#define MPEG_FRAME_TYPE_ALL 7 + +#define CX18_MAX_PGM_INDEX (400) + +extern int cx18_debug; + + +struct cx18_options { + int megabytes[CX18_MAX_STREAMS]; /* Size in megabytes of each stream */ + int cardtype; /* force card type on load */ + int tuner; /* set tuner on load */ + int radio; /* enable/disable radio */ +}; + +/* per-buffer bit flags */ +#define CX18_F_B_NEED_BUF_SWAP 0 /* this buffer should be byte swapped */ + +/* per-stream, s_flags */ +#define CX18_F_S_CLAIMED 3 /* this stream is claimed */ +#define CX18_F_S_STREAMING 4 /* the fw is decoding/encoding this stream */ +#define CX18_F_S_INTERNAL_USE 5 /* this stream is used internally (sliced VBI processing) */ +#define CX18_F_S_STREAMOFF 7 /* signal end of stream EOS */ +#define CX18_F_S_APPL_IO 8 /* this stream is used read/written by an application */ + +/* per-cx18, i_flags */ +#define CX18_F_I_LOADED_FW 0 /* Loaded the firmware the first time */ +#define CX18_F_I_EOS 4 /* End of encoder stream reached */ +#define CX18_F_I_RADIO_USER 5 /* The radio tuner is selected */ +#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ +#define CX18_F_I_INITED 21 /* set after first open */ +#define CX18_F_I_FAILED 22 /* set if first open failed */ + +/* These are the VBI types as they appear in the embedded VBI private packets. */ +#define CX18_SLICED_TYPE_TELETEXT_B (1) +#define CX18_SLICED_TYPE_CAPTION_525 (4) +#define CX18_SLICED_TYPE_WSS_625 (5) +#define CX18_SLICED_TYPE_VPS (7) + +struct cx18_buffer { + struct list_head list; + dma_addr_t dma_handle; + u32 id; + unsigned long b_flags; + char *buf; + + u32 bytesused; + u32 readpos; +}; + +struct cx18_queue { + struct list_head list; + u32 buffers; + u32 length; + u32 bytesused; +}; + +struct cx18_dvb { + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + int enabled; + int feeding; + + struct mutex feedlock; + +}; + +struct cx18; /* forward reference */ +struct cx18_scb; /* forward reference */ + +struct cx18_stream { + /* These first four fields are always set, even if the stream + is not actually created. */ + struct video_device *v4l2dev; /* NULL when stream not created */ + struct cx18 *cx; /* for ease of use */ + const char *name; /* name of the stream */ + int type; /* stream type */ + u32 handle; /* task handle */ + unsigned mdl_offset; + + u32 id; + spinlock_t qlock; /* locks access to the queues */ + unsigned long s_flags; /* status flags, see above */ + int dma; /* can be PCI_DMA_TODEVICE, + PCI_DMA_FROMDEVICE or + PCI_DMA_NONE */ + u64 dma_pts; + wait_queue_head_t waitq; + + /* Buffer Stats */ + u32 buffers; + u32 buf_size; + u32 buffers_stolen; + + /* Buffer Queues */ + struct cx18_queue q_free; /* free buffers */ + struct cx18_queue q_full; /* full buffers */ + struct cx18_queue q_io; /* waiting for I/O */ + + /* DVB / Digital Transport */ + struct cx18_dvb dvb; +}; + +struct cx18_open_id { + u32 open_id; + int type; + enum v4l2_priority prio; + struct cx18 *cx; +}; + +/* forward declaration of struct defined in cx18-cards.h */ +struct cx18_card; + + +#define CX18_VBI_FRAMES 32 + +/* VBI data */ +struct vbi_info { + u32 enc_size; + u32 frame; + u8 cc_data_odd[256]; + u8 cc_data_even[256]; + int cc_pos; + u8 cc_no_update; + u8 vps[5]; + u8 vps_found; + int wss; + u8 wss_found; + u8 wss_no_update; + u32 raw_decoder_line_size; + u8 raw_decoder_sav_odd_field; + u8 raw_decoder_sav_even_field; + u32 sliced_decoder_line_size; + u8 sliced_decoder_sav_odd_field; + u8 sliced_decoder_sav_even_field; + struct v4l2_format in; + /* convenience pointer to sliced struct in vbi_in union */ + struct v4l2_sliced_vbi_format *sliced_in; + u32 service_set_in; + int insert_mpeg; + + /* Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines. + One for /dev/vbi0 and one for /dev/vbi8 */ + struct v4l2_sliced_vbi_data sliced_data[36]; + + /* Buffer for VBI data inserted into MPEG stream. + The first byte is a dummy byte that's never used. + The next 16 bytes contain the MPEG header for the VBI data, + the remainder is the actual VBI data. + The max size accepted by the MPEG VBI reinsertion turns out + to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes, + where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is + a single line header byte and 2 * 18 is the number of VBI lines per frame. + + However, it seems that the data must be 1K aligned, so we have to + pad the data until the 1 or 2 K boundary. + + This pointer array will allocate 2049 bytes to store each VBI frame. */ + u8 *sliced_mpeg_data[CX18_VBI_FRAMES]; + u32 sliced_mpeg_size[CX18_VBI_FRAMES]; + struct cx18_buffer sliced_mpeg_buf; + u32 inserted_frame; + + u32 start[2], count; + u32 raw_size; + u32 sliced_size; +}; + +/* Per cx23418, per I2C bus private algo callback data */ +struct cx18_i2c_algo_callback_data { + struct cx18 *cx; + int bus_index; /* 0 or 1 for the cx23418's 1st or 2nd I2C bus */ +}; + +/* Struct to hold info about cx18 cards */ +struct cx18 { + int num; /* board number, -1 during init! */ + char name[8]; /* board name for printk and interrupts (e.g. 'cx180') */ + struct pci_dev *dev; /* PCI device */ + const struct cx18_card *card; /* card information */ + const char *card_name; /* full name of the card */ + const struct cx18_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */ + u8 is_50hz; + u8 is_60hz; + u8 is_out_50hz; + u8 is_out_60hz; + u8 nof_inputs; /* number of video inputs */ + u8 nof_audio_inputs; /* number of audio inputs */ + u16 buffer_id; /* buffer ID counter */ + u32 v4l2_cap; /* V4L2 capabilities of card */ + u32 hw_flags; /* Hardware description of the board */ + unsigned mdl_offset; + struct cx18_scb __iomem *scb; /* pointer to SCB */ + + struct cx18_av_state av_state; + + /* codec settings */ + struct cx2341x_mpeg_params params; + u32 filter_mode; + u32 temporal_strength; + u32 spatial_strength; + + /* dualwatch */ + unsigned long dualwatch_jiffies; + u16 dualwatch_stereo_mode; + + /* Digitizer type */ + int digitizer; /* 0x00EF = saa7114 0x00FO = saa7115 0x0106 = mic */ + + struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */ + struct cx18_options options; /* User options */ + int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */ + struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */ + unsigned long i_flags; /* global cx18 flags */ + atomic_t ana_capturing; /* count number of active analog capture streams */ + atomic_t tot_capturing; /* total count number of active capture streams */ + spinlock_t lock; /* lock access to this struct */ + int search_pack_header; + + spinlock_t dma_reg_lock; /* lock access to DMA engine registers */ + + int open_id; /* incremented each time an open occurs, used as + unique ID. Starts at 1, so 0 can be used as + uninitialized value in the stream->id. */ + + u32 base_addr; + struct v4l2_prio_state prio; + + u8 card_rev; + void __iomem *enc_mem, *reg_mem; + + struct vbi_info vbi; + + u32 pgm_info_offset; + u32 pgm_info_num; + u32 pgm_info_write_idx; + u32 pgm_info_read_idx; + struct v4l2_enc_idx_entry pgm_info[CX18_MAX_PGM_INDEX]; + + u64 mpg_data_received; + u64 vbi_data_inserted; + + wait_queue_head_t mb_apu_waitq; + wait_queue_head_t mb_cpu_waitq; + wait_queue_head_t mb_epu_waitq; + wait_queue_head_t mb_hpu_waitq; + wait_queue_head_t cap_w; + /* when the current DMA is finished this queue is woken up */ + wait_queue_head_t dma_waitq; + + /* i2c */ + struct i2c_adapter i2c_adap[2]; + struct i2c_algo_bit_data i2c_algo[2]; + struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2]; + struct i2c_client i2c_client[2]; + struct mutex i2c_bus_lock[2]; + struct i2c_client *i2c_clients[I2C_CLIENTS_MAX]; + + /* gpio */ + u32 gpio_dir; + u32 gpio_val; + + /* v4l2 and User settings */ + + /* codec settings */ + u32 audio_input; + u32 active_input; + u32 active_output; + v4l2_std_id std; + v4l2_std_id tuner_std; /* The norm of the tuner (fixed) */ +}; + +/* Globals */ +extern struct cx18 *cx18_cards[]; +extern int cx18_cards_active; +extern int cx18_first_minor; +extern spinlock_t cx18_cards_lock; + +/*==============Prototypes==================*/ + +/* Return non-zero if a signal is pending */ +int cx18_msleep_timeout(unsigned int msecs, int intr); + +/* Read Hauppauge eeprom */ +struct tveeprom; /* forward reference */ +void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv); + +/* First-open initialization: load firmware, etc. */ +int cx18_init_on_first_open(struct cx18 *cx); + +/* This is a PCI post thing, where if the pci register is not read, then + the write doesn't always take effect right away. By reading back the + register any pending PCI writes will be performed (in order), and so + you can be sure that the writes are guaranteed to be done. + + Rarely needed, only in some timing sensitive cases. + Apparently if this is not done some motherboards seem + to kill the firmware and get into the broken state until computer is + rebooted. */ +#define write_sync(val, reg) \ + do { writel(val, reg); readl(reg); } while (0) + +#define read_reg(reg) readl(cx->reg_mem + (reg)) +#define write_reg(val, reg) writel(val, cx->reg_mem + (reg)) +#define write_reg_sync(val, reg) \ + do { write_reg(val, reg); read_reg(reg); } while (0) + +#define read_enc(addr) readl(cx->enc_mem + (u32)(addr)) +#define write_enc(val, addr) writel(val, cx->enc_mem + (u32)(addr)) +#define write_enc_sync(val, addr) \ + do { write_enc(val, addr); read_enc(addr); } while (0) + +#define sw1_irq_enable(val) do { \ + write_reg(val, SW1_INT_STATUS); \ + write_reg(read_reg(SW1_INT_ENABLE_PCI) | (val), SW1_INT_ENABLE_PCI); \ +} while (0) + +#define sw1_irq_disable(val) \ + write_reg(read_reg(SW1_INT_ENABLE_PCI) & ~(val), SW1_INT_ENABLE_PCI); + +#define sw2_irq_enable(val) do { \ + write_reg(val, SW2_INT_STATUS); \ + write_reg(read_reg(SW2_INT_ENABLE_PCI) | (val), SW2_INT_ENABLE_PCI); \ +} while (0) + +#define sw2_irq_disable(val) \ + write_reg(read_reg(SW2_INT_ENABLE_PCI) & ~(val), SW2_INT_ENABLE_PCI); + +#define setup_page(addr) do { \ + u32 val = read_reg(0xD000F8) & ~0x1f00; \ + write_reg(val | (((addr) >> 17) & 0x1f00), 0xD000F8); \ +} while (0) + +#endif /* CX18_DRIVER_H */ diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c new file mode 100644 index 00000000000..cae38985b13 --- /dev/null +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -0,0 +1,301 @@ +/* + * cx18 functions for DVB support + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx18-version.h" +#include "cx18-dvb.h" +#include "cx18-streams.h" +#include "cx18-cards.h" +#include "s5h1409.h" +#include "mxl5005s.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000 + +static struct mxl5005s_config hauppauge_hvr1600_tuner = { + .i2c_address = 0xC6 >> 1, + .if_freq = IF_FREQ_5380000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C_H, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct s5h1409_config hauppauge_hvr1600_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK + +}; + +static int dvb_register(struct cx18_stream *stream); + +/* Kernel DVB framework calls this when the feed needs to start. + * The CX18 framework should enable the transport DMA handling + * and queue processing. + */ +static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct cx18_stream *stream = (struct cx18_stream *) demux->priv; + struct cx18 *cx = stream->cx; + int ret; + u32 v; + + CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n", + feed->pid, feed->index); + + mutex_lock(&cx->serialize_lock); + ret = cx18_init_on_first_open(cx); + mutex_unlock(&cx->serialize_lock); + if (ret) { + CX18_ERR("Failed to initialize firmware starting DVB feed\n"); + return ret; + } + ret = -EINVAL; + + switch (cx->card->type) { + case CX18_CARD_HVR_1600_ESMT: + case CX18_CARD_HVR_1600_SAMSUNG: + v = read_reg(CX18_REG_DMUX_NUM_PORT_0_CONTROL); + v |= 0x00400000; /* Serial Mode */ + v |= 0x00002000; /* Data Length - Byte */ + v |= 0x00010000; /* Error - Polarity */ + v |= 0x00020000; /* Error - Passthru */ + v |= 0x000c0000; /* Error - Ignore */ + write_reg(v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); + break; + + default: + /* Assumption - Parallel transport - Signalling + * undefined or default. + */ + break; + } + + if (!demux->dmx.frontend) + return -EINVAL; + + if (stream) { + mutex_lock(&stream->dvb.feedlock); + if (stream->dvb.feeding++ == 0) { + CX18_DEBUG_INFO("Starting Transport DMA\n"); + ret = cx18_start_v4l2_encode_stream(stream); + if (ret < 0) { + CX18_DEBUG_INFO( + "Failed to start Transport DMA\n"); + stream->dvb.feeding--; + } + } else + ret = 0; + mutex_unlock(&stream->dvb.feedlock); + } + + return ret; +} + +/* Kernel DVB framework calls this when the feed needs to stop. */ +static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct cx18_stream *stream = (struct cx18_stream *)demux->priv; + struct cx18 *cx = stream->cx; + int ret = -EINVAL; + + CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n", + feed->pid, feed->index); + + if (stream) { + mutex_lock(&stream->dvb.feedlock); + if (--stream->dvb.feeding == 0) { + CX18_DEBUG_INFO("Stopping Transport DMA\n"); + ret = cx18_stop_v4l2_encode_stream(stream, 0); + } else + ret = 0; + mutex_unlock(&stream->dvb.feedlock); + } + + return ret; +} + +int cx18_dvb_register(struct cx18_stream *stream) +{ + struct cx18 *cx = stream->cx; + struct cx18_dvb *dvb = &stream->dvb; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret; + + if (!dvb) + return -EINVAL; + + ret = dvb_register_adapter(&dvb->dvb_adapter, + CX18_DRIVER_NAME, + THIS_MODULE, &cx->dev->dev, adapter_nr); + if (ret < 0) + goto err_out; + + dvb_adapter = &dvb->dvb_adapter; + + dvbdemux = &dvb->demux; + + dvbdemux->priv = (void *)stream; + + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = cx18_dvb_start_feed; + dvbdemux->stop_feed = cx18_dvb_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + + dvb->hw_frontend.source = DMX_FRONTEND_0; + dvb->mem_frontend.source = DMX_MEMORY_FE; + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = dmx; + + ret = dvb_dmxdev_init(&dvb->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + ret = dmx->add_frontend(dmx, &dvb->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + ret = dmx->add_frontend(dmx, &dvb->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &dvb->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = dvb_register(stream); + if (ret < 0) + goto err_disconnect_frontend; + + dvb_net_init(dvb_adapter, &dvb->dvbnet, dmx); + + CX18_INFO("DVB Frontend registered\n"); + mutex_init(&dvb->feedlock); + dvb->enabled = 1; + return ret; + +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &dvb->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &dvb->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&dvb->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_out: + return ret; +} + +void cx18_dvb_unregister(struct cx18_stream *stream) +{ + struct cx18 *cx = stream->cx; + struct cx18_dvb *dvb = &stream->dvb; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + + CX18_INFO("unregister DVB\n"); + + dvb_adapter = &dvb->dvb_adapter; + dvbdemux = &dvb->demux; + dmx = &dvbdemux->dmx; + + dmx->close(dmx); + dvb_net_release(&dvb->dvbnet); + dmx->remove_frontend(dmx, &dvb->mem_frontend); + dmx->remove_frontend(dmx, &dvb->hw_frontend); + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_frontend(dvb->fe); + dvb_frontend_detach(dvb->fe); + dvb_unregister_adapter(dvb_adapter); +} + +/* All the DVB attach calls go here, this function get's modified + * for each new card. No other function in this file needs + * to change. + */ +static int dvb_register(struct cx18_stream *stream) +{ + struct cx18_dvb *dvb = &stream->dvb; + struct cx18 *cx = stream->cx; + int ret = 0; + + switch (cx->card->type) { + case CX18_CARD_HVR_1600_ESMT: + case CX18_CARD_HVR_1600_SAMSUNG: + dvb->fe = dvb_attach(s5h1409_attach, + &hauppauge_hvr1600_config, + &cx->i2c_adap[0]); + if (dvb->fe != NULL) { + dvb_attach(mxl5005s_attach, dvb->fe, + &cx->i2c_adap[0], + &hauppauge_hvr1600_tuner); + ret = 0; + } + break; + default: + /* No Digital Tv Support */ + break; + } + + if (dvb->fe == NULL) { + CX18_ERR("frontend initialization failed\n"); + return -1; + } + + ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe); + if (ret < 0) { + if (dvb->fe->ops.release) + dvb->fe->ops.release(dvb->fe); + return ret; + } + + return ret; +} diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h new file mode 100644 index 00000000000..d6a6ccda79a --- /dev/null +++ b/drivers/media/video/cx18/cx18-dvb.h @@ -0,0 +1,25 @@ +/* + * cx18 functions for DVB support + * + * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx18-driver.h" + +int cx18_dvb_register(struct cx18_stream *stream); +void cx18_dvb_unregister(struct cx18_stream *stream); diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c new file mode 100644 index 00000000000..1e537fe04a2 --- /dev/null +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -0,0 +1,714 @@ +/* + * cx18 file operation functions + * + * Derived from ivtv-fileops.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-fileops.h" +#include "cx18-i2c.h" +#include "cx18-queue.h" +#include "cx18-vbi.h" +#include "cx18-audio.h" +#include "cx18-mailbox.h" +#include "cx18-scb.h" +#include "cx18-streams.h" +#include "cx18-controls.h" +#include "cx18-ioctl.h" +#include "cx18-cards.h" + +/* This function tries to claim the stream for a specific file descriptor. + If no one else is using this stream then the stream is claimed and + associated VBI streams are also automatically claimed. + Possible error returns: -EBUSY if someone else has claimed + the stream or 0 on success. */ +static int cx18_claim_stream(struct cx18_open_id *id, int type) +{ + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[type]; + struct cx18_stream *s_vbi; + int vbi_type; + + if (test_and_set_bit(CX18_F_S_CLAIMED, &s->s_flags)) { + /* someone already claimed this stream */ + if (s->id == id->open_id) { + /* yes, this file descriptor did. So that's OK. */ + return 0; + } + if (s->id == -1 && type == CX18_ENC_STREAM_TYPE_VBI) { + /* VBI is handled already internally, now also assign + the file descriptor to this stream for external + reading of the stream. */ + s->id = id->open_id; + CX18_DEBUG_INFO("Start Read VBI\n"); + return 0; + } + /* someone else is using this stream already */ + CX18_DEBUG_INFO("Stream %d is busy\n", type); + return -EBUSY; + } + s->id = id->open_id; + + /* CX18_DEC_STREAM_TYPE_MPG needs to claim CX18_DEC_STREAM_TYPE_VBI, + CX18_ENC_STREAM_TYPE_MPG needs to claim CX18_ENC_STREAM_TYPE_VBI + (provided VBI insertion is on and sliced VBI is selected), for all + other streams we're done */ + if (type == CX18_ENC_STREAM_TYPE_MPG && + cx->vbi.insert_mpeg && cx->vbi.sliced_in->service_set) { + vbi_type = CX18_ENC_STREAM_TYPE_VBI; + } else { + return 0; + } + s_vbi = &cx->streams[vbi_type]; + + set_bit(CX18_F_S_CLAIMED, &s_vbi->s_flags); + + /* mark that it is used internally */ + set_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags); + return 0; +} + +/* This function releases a previously claimed stream. It will take into + account associated VBI streams. */ +static void cx18_release_stream(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + struct cx18_stream *s_vbi; + + s->id = -1; + if (s->type == CX18_ENC_STREAM_TYPE_VBI && + test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags)) { + /* this stream is still in use internally */ + return; + } + if (!test_and_clear_bit(CX18_F_S_CLAIMED, &s->s_flags)) { + CX18_DEBUG_WARN("Release stream %s not in use!\n", s->name); + return; + } + + cx18_flush_queues(s); + + /* CX18_ENC_STREAM_TYPE_MPG needs to release CX18_ENC_STREAM_TYPE_VBI, + for all other streams we're done */ + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + else + return; + + /* clear internal use flag */ + if (!test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags)) { + /* was already cleared */ + return; + } + if (s_vbi->id != -1) { + /* VBI stream still claimed by a file descriptor */ + return; + } + clear_bit(CX18_F_S_CLAIMED, &s_vbi->s_flags); + cx18_flush_queues(s_vbi); +} + +static void cx18_dualwatch(struct cx18 *cx) +{ + struct v4l2_tuner vt; + u16 new_bitmap; + u16 new_stereo_mode; + const u16 stereo_mask = 0x0300; + const u16 dual = 0x0200; + + new_stereo_mode = cx->params.audio_properties & stereo_mask; + memset(&vt, 0, sizeof(vt)); + cx18_call_i2c_clients(cx, VIDIOC_G_TUNER, &vt); + if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && + (vt.rxsubchans & V4L2_TUNER_SUB_LANG2)) + new_stereo_mode = dual; + + if (new_stereo_mode == cx->dualwatch_stereo_mode) + return; + + new_bitmap = new_stereo_mode | (cx->params.audio_properties & ~stereo_mask); + + CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. new audio_bitmask=0x%ux\n", + cx->dualwatch_stereo_mode, new_stereo_mode, new_bitmap); + + if (cx18_vapi(cx, CX18_CPU_SET_AUDIO_PARAMETERS, 2, + cx18_find_handle(cx), new_bitmap) == 0) { + cx->dualwatch_stereo_mode = new_stereo_mode; + return; + } + CX18_DEBUG_INFO("dualwatch: changing stereo flag failed\n"); +} + + +static struct cx18_buffer *cx18_get_buffer(struct cx18_stream *s, int non_block, int *err) +{ + struct cx18 *cx = s->cx; + struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + struct cx18_buffer *buf; + DEFINE_WAIT(wait); + + *err = 0; + while (1) { + if (s->type == CX18_ENC_STREAM_TYPE_MPG) { + + if (time_after(jiffies, cx->dualwatch_jiffies + msecs_to_jiffies(1000))) { + cx->dualwatch_jiffies = jiffies; + cx18_dualwatch(cx); + } + if (test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) && + !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) { + while ((buf = cx18_dequeue(s_vbi, &s_vbi->q_full))) { + /* byteswap and process VBI data */ +/* cx18_process_vbi_data(cx, buf, s_vbi->dma_pts, s_vbi->type); */ + cx18_enqueue(s_vbi, buf, &s_vbi->q_free); + } + } + buf = &cx->vbi.sliced_mpeg_buf; + if (buf->readpos != buf->bytesused) + return buf; + } + + /* do we have leftover data? */ + buf = cx18_dequeue(s, &s->q_io); + if (buf) + return buf; + + /* do we have new data? */ + buf = cx18_dequeue(s, &s->q_full); + if (buf) { + if (!test_and_clear_bit(CX18_F_B_NEED_BUF_SWAP, + &buf->b_flags)) + return buf; + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + /* byteswap MPG data */ + cx18_buf_swap(buf); + else { + /* byteswap and process VBI data */ + cx18_process_vbi_data(cx, buf, + s->dma_pts, s->type); + } + return buf; + } + + /* return if end of stream */ + if (!test_bit(CX18_F_S_STREAMING, &s->s_flags)) { + CX18_DEBUG_INFO("EOS %s\n", s->name); + return NULL; + } + + /* return if file was opened with O_NONBLOCK */ + if (non_block) { + *err = -EAGAIN; + return NULL; + } + + /* wait for more data to arrive */ + prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE); + /* New buffers might have become available before we were added + to the waitqueue */ + if (!s->q_full.buffers) + schedule(); + finish_wait(&s->waitq, &wait); + if (signal_pending(current)) { + /* return if a signal was received */ + CX18_DEBUG_INFO("User stopped %s\n", s->name); + *err = -EINTR; + return NULL; + } + } +} + +static void cx18_setup_sliced_vbi_buf(struct cx18 *cx) +{ + int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES; + + cx->vbi.sliced_mpeg_buf.buf = cx->vbi.sliced_mpeg_data[idx]; + cx->vbi.sliced_mpeg_buf.bytesused = cx->vbi.sliced_mpeg_size[idx]; + cx->vbi.sliced_mpeg_buf.readpos = 0; +} + +static size_t cx18_copy_buf_to_user(struct cx18_stream *s, + struct cx18_buffer *buf, char __user *ubuf, size_t ucount) +{ + struct cx18 *cx = s->cx; + size_t len = buf->bytesused - buf->readpos; + + if (len > ucount) + len = ucount; + if (cx->vbi.insert_mpeg && s->type == CX18_ENC_STREAM_TYPE_MPG && + cx->vbi.sliced_in->service_set && buf != &cx->vbi.sliced_mpeg_buf) { + const char *start = buf->buf + buf->readpos; + const char *p = start + 1; + const u8 *q; + u8 ch = cx->search_pack_header ? 0xba : 0xe0; + int stuffing, i; + + while (start + len > p) { + q = memchr(p, 0, start + len - p); + if (q == NULL) + break; + p = q + 1; + if ((char *)q + 15 >= buf->buf + buf->bytesused || + q[1] != 0 || q[2] != 1 || q[3] != ch) + continue; + if (!cx->search_pack_header) { + if ((q[6] & 0xc0) != 0x80) + continue; + if (((q[7] & 0xc0) == 0x80 && + (q[9] & 0xf0) == 0x20) || + ((q[7] & 0xc0) == 0xc0 && + (q[9] & 0xf0) == 0x30)) { + ch = 0xba; + cx->search_pack_header = 1; + p = q + 9; + } + continue; + } + stuffing = q[13] & 7; + /* all stuffing bytes must be 0xff */ + for (i = 0; i < stuffing; i++) + if (q[14 + i] != 0xff) + break; + if (i == stuffing && + (q[4] & 0xc4) == 0x44 && + (q[12] & 3) == 3 && + q[14 + stuffing] == 0 && + q[15 + stuffing] == 0 && + q[16 + stuffing] == 1) { + cx->search_pack_header = 0; + len = (char *)q - start; + cx18_setup_sliced_vbi_buf(cx); + break; + } + } + } + if (copy_to_user(ubuf, (u8 *)buf->buf + buf->readpos, len)) { + CX18_DEBUG_WARN("copy %zd bytes to user failed for %s\n", + len, s->name); + return -EFAULT; + } + buf->readpos += len; + if (s->type == CX18_ENC_STREAM_TYPE_MPG && + buf != &cx->vbi.sliced_mpeg_buf) + cx->mpg_data_received += len; + return len; +} + +static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, + size_t tot_count, int non_block) +{ + struct cx18 *cx = s->cx; + size_t tot_written = 0; + int single_frame = 0; + + if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) { + /* shouldn't happen */ + CX18_DEBUG_WARN("Stream %s not initialized before read\n", + s->name); + return -EIO; + } + + /* Each VBI buffer is one frame, the v4l2 API says that for VBI the + frames should arrive one-by-one, so make sure we never output more + than one VBI frame at a time */ + if (s->type == CX18_ENC_STREAM_TYPE_VBI && + cx->vbi.sliced_in->service_set) + single_frame = 1; + + for (;;) { + struct cx18_buffer *buf; + int rc; + + buf = cx18_get_buffer(s, non_block, &rc); + /* if there is no data available... */ + if (buf == NULL) { + /* if we got data, then return that regardless */ + if (tot_written) + break; + /* EOS condition */ + if (rc == 0) { + clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); + clear_bit(CX18_F_S_APPL_IO, &s->s_flags); + cx18_release_stream(s); + } + /* set errno */ + return rc; + } + + rc = cx18_copy_buf_to_user(s, buf, ubuf + tot_written, + tot_count - tot_written); + + if (buf != &cx->vbi.sliced_mpeg_buf) { + if (buf->readpos == buf->bytesused) { + cx18_buf_sync_for_device(s, buf); + cx18_enqueue(s, buf, &s->q_free); + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, + s->handle, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - + cx->enc_mem, + 1, buf->id, s->buf_size); + } else + cx18_enqueue(s, buf, &s->q_io); + } else if (buf->readpos == buf->bytesused) { + int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES; + + cx->vbi.sliced_mpeg_size[idx] = 0; + cx->vbi.inserted_frame++; + cx->vbi_data_inserted += buf->bytesused; + } + if (rc < 0) + return rc; + tot_written += rc; + + if (tot_written == tot_count || single_frame) + break; + } + return tot_written; +} + +static ssize_t cx18_read_pos(struct cx18_stream *s, char __user *ubuf, + size_t count, loff_t *pos, int non_block) +{ + ssize_t rc = count ? cx18_read(s, ubuf, count, non_block) : 0; + struct cx18 *cx = s->cx; + + CX18_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc); + if (rc > 0) + pos += rc; + return rc; +} + +int cx18_start_capture(struct cx18_open_id *id) +{ + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + struct cx18_stream *s_vbi; + + if (s->type == CX18_ENC_STREAM_TYPE_RAD) { + /* you cannot read from these stream types. */ + return -EPERM; + } + + /* Try to claim this stream. */ + if (cx18_claim_stream(id, s->type)) + return -EBUSY; + + /* If capture is already in progress, then we also have to + do nothing extra. */ + if (test_bit(CX18_F_S_STREAMOFF, &s->s_flags) || + test_and_set_bit(CX18_F_S_STREAMING, &s->s_flags)) { + set_bit(CX18_F_S_APPL_IO, &s->s_flags); + return 0; + } + + /* Start VBI capture if required */ + s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + if (s->type == CX18_ENC_STREAM_TYPE_MPG && + test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) && + !test_and_set_bit(CX18_F_S_STREAMING, &s_vbi->s_flags)) { + /* Note: the CX18_ENC_STREAM_TYPE_VBI is claimed + automatically when the MPG stream is claimed. + We only need to start the VBI capturing. */ + if (cx18_start_v4l2_encode_stream(s_vbi)) { + CX18_DEBUG_WARN("VBI capture start failed\n"); + + /* Failure, clean up and return an error */ + clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags); + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + /* also releases the associated VBI stream */ + cx18_release_stream(s); + return -EIO; + } + CX18_DEBUG_INFO("VBI insertion started\n"); + } + + /* Tell the card to start capturing */ + if (!cx18_start_v4l2_encode_stream(s)) { + /* We're done */ + set_bit(CX18_F_S_APPL_IO, &s->s_flags); + /* Resume a possibly paused encoder */ + if (test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) + cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, s->handle); + return 0; + } + + /* failure, clean up */ + CX18_DEBUG_WARN("Failed to start capturing for stream %s\n", s->name); + + /* Note: the CX18_ENC_STREAM_TYPE_VBI is released + automatically when the MPG stream is released. + We only need to stop the VBI capturing. */ + if (s->type == CX18_ENC_STREAM_TYPE_MPG && + test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags)) { + cx18_stop_v4l2_encode_stream(s_vbi, 0); + clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags); + } + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + cx18_release_stream(s); + return -EIO; +} + +ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count, + loff_t *pos) +{ + struct cx18_open_id *id = filp->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + int rc; + + CX18_DEBUG_HI_FILE("read %zd bytes from %s\n", count, s->name); + + mutex_lock(&cx->serialize_lock); + rc = cx18_start_capture(id); + mutex_unlock(&cx->serialize_lock); + if (rc) + return rc; + return cx18_read_pos(s, buf, count, pos, filp->f_flags & O_NONBLOCK); +} + +unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait) +{ + struct cx18_open_id *id = filp->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + int eof = test_bit(CX18_F_S_STREAMOFF, &s->s_flags); + + /* Start a capture if there is none */ + if (!eof && !test_bit(CX18_F_S_STREAMING, &s->s_flags)) { + int rc; + + mutex_lock(&cx->serialize_lock); + rc = cx18_start_capture(id); + mutex_unlock(&cx->serialize_lock); + if (rc) { + CX18_DEBUG_INFO("Could not start capture for %s (%d)\n", + s->name, rc); + return POLLERR; + } + CX18_DEBUG_FILE("Encoder poll started capture\n"); + } + + /* add stream's waitq to the poll list */ + CX18_DEBUG_HI_FILE("Encoder poll\n"); + poll_wait(filp, &s->waitq, wait); + + if (s->q_full.length || s->q_io.length) + return POLLIN | POLLRDNORM; + if (eof) + return POLLHUP; + return 0; +} + +void cx18_stop_capture(struct cx18_open_id *id, int gop_end) +{ + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + CX18_DEBUG_IOCTL("close() of %s\n", s->name); + + /* 'Unclaim' this stream */ + + /* Stop capturing */ + if (test_bit(CX18_F_S_STREAMING, &s->s_flags)) { + struct cx18_stream *s_vbi = + &cx->streams[CX18_ENC_STREAM_TYPE_VBI]; + + CX18_DEBUG_INFO("close stopping capture\n"); + /* Special case: a running VBI capture for VBI insertion + in the mpeg stream. Need to stop that too. */ + if (id->type == CX18_ENC_STREAM_TYPE_MPG && + test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) && + !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) { + CX18_DEBUG_INFO("close stopping embedded VBI capture\n"); + cx18_stop_v4l2_encode_stream(s_vbi, 0); + } + if (id->type == CX18_ENC_STREAM_TYPE_VBI && + test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags)) + /* Also used internally, don't stop capturing */ + s->id = -1; + else + cx18_stop_v4l2_encode_stream(s, gop_end); + } + if (!gop_end) { + clear_bit(CX18_F_S_APPL_IO, &s->s_flags); + clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); + cx18_release_stream(s); + } +} + +int cx18_v4l2_close(struct inode *inode, struct file *filp) +{ + struct cx18_open_id *id = filp->private_data; + struct cx18 *cx = id->cx; + struct cx18_stream *s = &cx->streams[id->type]; + + CX18_DEBUG_IOCTL("close() of %s\n", s->name); + + v4l2_prio_close(&cx->prio, &id->prio); + + /* Easy case first: this stream was never claimed by us */ + if (s->id != id->open_id) { + kfree(id); + return 0; + } + + /* 'Unclaim' this stream */ + + /* Stop radio */ + mutex_lock(&cx->serialize_lock); + if (id->type == CX18_ENC_STREAM_TYPE_RAD) { + /* Closing radio device, return to TV mode */ + cx18_mute(cx); + /* Mark that the radio is no longer in use */ + clear_bit(CX18_F_I_RADIO_USER, &cx->i_flags); + /* Switch tuner to TV */ + cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); + /* Select correct audio input (i.e. TV tuner or Line in) */ + cx18_audio_set_io(cx); + if (atomic_read(&cx->ana_capturing) > 0) { + /* Undo video mute */ + cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, + cx->params.video_mute | + (cx->params.video_mute_yuv << 8)); + } + /* Done! Unmute and continue. */ + cx18_unmute(cx); + cx18_release_stream(s); + } else { + cx18_stop_capture(id, 0); + } + kfree(id); + mutex_unlock(&cx->serialize_lock); + return 0; +} + +static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) +{ + struct cx18 *cx = s->cx; + struct cx18_open_id *item; + + CX18_DEBUG_FILE("open %s\n", s->name); + + /* Allocate memory */ + item = kmalloc(sizeof(struct cx18_open_id), GFP_KERNEL); + if (NULL == item) { + CX18_DEBUG_WARN("nomem on v4l2 open\n"); + return -ENOMEM; + } + item->cx = cx; + item->type = s->type; + v4l2_prio_open(&cx->prio, &item->prio); + + item->open_id = cx->open_id++; + filp->private_data = item; + + if (item->type == CX18_ENC_STREAM_TYPE_RAD) { + /* Try to claim this stream */ + if (cx18_claim_stream(item, item->type)) { + /* No, it's already in use */ + kfree(item); + return -EBUSY; + } + + if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { + if (atomic_read(&cx->ana_capturing) > 0) { + /* switching to radio while capture is + in progress is not polite */ + cx18_release_stream(s); + kfree(item); + return -EBUSY; + } + } + + /* Mark that the radio is being used. */ + set_bit(CX18_F_I_RADIO_USER, &cx->i_flags); + /* We have the radio */ + cx18_mute(cx); + /* Switch tuner to radio */ + cx18_call_i2c_clients(cx, AUDC_SET_RADIO, NULL); + /* Select the correct audio input (i.e. radio tuner) */ + cx18_audio_set_io(cx); + /* Done! Unmute and continue. */ + cx18_unmute(cx); + } + return 0; +} + +int cx18_v4l2_open(struct inode *inode, struct file *filp) +{ + int res, x, y = 0; + struct cx18 *cx = NULL; + struct cx18_stream *s = NULL; + int minor = iminor(inode); + + /* Find which card this open was on */ + spin_lock(&cx18_cards_lock); + for (x = 0; cx == NULL && x < cx18_cards_active; x++) { + /* find out which stream this open was on */ + for (y = 0; y < CX18_MAX_STREAMS; y++) { + if (cx18_cards[x] == NULL) + continue; + s = &cx18_cards[x]->streams[y]; + if (s->v4l2dev && s->v4l2dev->minor == minor) { + cx = cx18_cards[x]; + break; + } + } + } + spin_unlock(&cx18_cards_lock); + + if (cx == NULL) { + /* Couldn't find a device registered + on that minor, shouldn't happen! */ + printk(KERN_WARNING "No cx18 device found on minor %d\n", + minor); + return -ENXIO; + } + + mutex_lock(&cx->serialize_lock); + if (cx18_init_on_first_open(cx)) { + CX18_ERR("Failed to initialize on minor %d\n", minor); + mutex_unlock(&cx->serialize_lock); + return -ENXIO; + } + res = cx18_serialized_open(s, filp); + mutex_unlock(&cx->serialize_lock); + return res; +} + +void cx18_mute(struct cx18 *cx) +{ + if (atomic_read(&cx->ana_capturing)) + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, + cx18_find_handle(cx), 1); + CX18_DEBUG_INFO("Mute\n"); +} + +void cx18_unmute(struct cx18 *cx) +{ + if (atomic_read(&cx->ana_capturing)) { + cx18_msleep_timeout(100, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, + cx18_find_handle(cx), 12); + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, + cx18_find_handle(cx), 0); + } + CX18_DEBUG_INFO("Unmute\n"); +} diff --git a/drivers/media/video/cx18/cx18-fileops.h b/drivers/media/video/cx18/cx18-fileops.h new file mode 100644 index 00000000000..46da0282fc7 --- /dev/null +++ b/drivers/media/video/cx18/cx18-fileops.h @@ -0,0 +1,36 @@ +/* + * cx18 file operation functions + * + * Derived from ivtv-fileops.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +/* Testing/Debugging */ +int cx18_v4l2_open(struct inode *inode, struct file *filp); +ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count, + loff_t *pos); +ssize_t cx18_v4l2_write(struct file *filp, const char __user *buf, size_t count, + loff_t *pos); +int cx18_v4l2_close(struct inode *inode, struct file *filp); +unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait); +int cx18_start_capture(struct cx18_open_id *id); +void cx18_stop_capture(struct cx18_open_id *id, int gop_end); +void cx18_mute(struct cx18 *cx); +void cx18_unmute(struct cx18 *cx); + diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c new file mode 100644 index 00000000000..2694ce35063 --- /dev/null +++ b/drivers/media/video/cx18/cx18-firmware.c @@ -0,0 +1,373 @@ +/* + * cx18 firmware functions + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-scb.h" +#include "cx18-irq.h" +#include "cx18-firmware.h" +#include "cx18-cards.h" +#include <linux/firmware.h> + +#define CX18_PROC_SOFT_RESET 0xc70010 +#define CX18_DDR_SOFT_RESET 0xc70014 +#define CX18_CLOCK_SELECT1 0xc71000 +#define CX18_CLOCK_SELECT2 0xc71004 +#define CX18_HALF_CLOCK_SELECT1 0xc71008 +#define CX18_HALF_CLOCK_SELECT2 0xc7100C +#define CX18_CLOCK_POLARITY1 0xc71010 +#define CX18_CLOCK_POLARITY2 0xc71014 +#define CX18_ADD_DELAY_ENABLE1 0xc71018 +#define CX18_ADD_DELAY_ENABLE2 0xc7101C +#define CX18_CLOCK_ENABLE1 0xc71020 +#define CX18_CLOCK_ENABLE2 0xc71024 + +#define CX18_REG_BUS_TIMEOUT_EN 0xc72024 + +#define CX18_AUDIO_ENABLE 0xc72014 +#define CX18_REG_BUS_TIMEOUT_EN 0xc72024 + +#define CX18_FAST_CLOCK_PLL_INT 0xc78000 +#define CX18_FAST_CLOCK_PLL_FRAC 0xc78004 +#define CX18_FAST_CLOCK_PLL_POST 0xc78008 +#define CX18_FAST_CLOCK_PLL_PRESCALE 0xc7800C +#define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010 + +#define CX18_SLOW_CLOCK_PLL_INT 0xc78014 +#define CX18_SLOW_CLOCK_PLL_FRAC 0xc78018 +#define CX18_SLOW_CLOCK_PLL_POST 0xc7801C +#define CX18_MPEG_CLOCK_PLL_INT 0xc78040 +#define CX18_MPEG_CLOCK_PLL_FRAC 0xc78044 +#define CX18_MPEG_CLOCK_PLL_POST 0xc78048 +#define CX18_PLL_POWER_DOWN 0xc78088 +#define CX18_SW1_INT_STATUS 0xc73104 +#define CX18_SW1_INT_ENABLE_PCI 0xc7311C +#define CX18_SW2_INT_SET 0xc73140 +#define CX18_SW2_INT_STATUS 0xc73144 +#define CX18_ADEC_CONTROL 0xc78120 + +#define CX18_DDR_REQUEST_ENABLE 0xc80000 +#define CX18_DDR_CHIP_CONFIG 0xc80004 +#define CX18_DDR_REFRESH 0xc80008 +#define CX18_DDR_TIMING1 0xc8000C +#define CX18_DDR_TIMING2 0xc80010 +#define CX18_DDR_POWER_REG 0xc8001C + +#define CX18_DDR_TUNE_LANE 0xc80048 +#define CX18_DDR_INITIAL_EMRS 0xc80054 +#define CX18_DDR_MB_PER_ROW_7 0xc8009C +#define CX18_DDR_BASE_63_ADDR 0xc804FC + +#define CX18_WMB_CLIENT02 0xc90108 +#define CX18_WMB_CLIENT05 0xc90114 +#define CX18_WMB_CLIENT06 0xc90118 +#define CX18_WMB_CLIENT07 0xc9011C +#define CX18_WMB_CLIENT08 0xc90120 +#define CX18_WMB_CLIENT09 0xc90124 +#define CX18_WMB_CLIENT10 0xc90128 +#define CX18_WMB_CLIENT11 0xc9012C +#define CX18_WMB_CLIENT12 0xc90130 +#define CX18_WMB_CLIENT13 0xc90134 +#define CX18_WMB_CLIENT14 0xc90138 + +#define CX18_DSP0_INTERRUPT_MASK 0xd0004C + +/* Encoder/decoder firmware sizes */ +#define CX18_FW_CPU_SIZE (174716) +#define CX18_FW_APU_SIZE (141200) + +#define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */ +#define APU_ROM_SYNC2 0x72646548 /* "rdeH" */ + +struct cx18_apu_rom_seghdr { + u32 sync1; + u32 sync2; + u32 addr; + u32 size; +}; + +static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx, long size) +{ + const struct firmware *fw = NULL; + int retries = 3; + int i, j; + u32 __iomem *dst = (u32 __iomem *)mem; + const u32 *src; + +retry: + if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) { + CX18_ERR("Unable to open firmware %s (must be %ld bytes)\n", + fn, size); + CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n"); + return -ENOMEM; + } + + src = (const u32 *)fw->data; + + if (fw->size != size) { + /* Due to race conditions in firmware loading (esp. with + udev <0.95) the wrong file was sometimes loaded. So we check + filesizes to see if at least the right-sized file was + loaded. If not, then we retry. */ + CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n", + fn, size, fw->size); + release_firmware(fw); + retries--; + goto retry; + } + for (i = 0; i < fw->size; i += 4096) { + setup_page(i); + for (j = i; j < fw->size && j < i + 4096; j += 4) { + /* no need for endianness conversion on the ppc */ + __raw_writel(*src, dst); + if (__raw_readl(dst) != *src) { + CX18_ERR("Mismatch at offset %x\n", i); + release_firmware(fw); + return -EIO; + } + dst++; + src++; + } + } + if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags)) + CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size); + release_firmware(fw); + return size; +} + +static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx, long size) +{ + const struct firmware *fw = NULL; + int retries = 3; + int i, j; + const u32 *src; + struct cx18_apu_rom_seghdr seghdr; + const u8 *vers; + u32 offset = 0; + u32 apu_version = 0; + int sz; + +retry: + if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) { + CX18_ERR("unable to open firmware %s (must be %ld bytes)\n", + fn, size); + CX18_ERR("did you put the firmware in the hotplug firmware directory?\n"); + return -ENOMEM; + } + + src = (const u32 *)fw->data; + vers = fw->data + sizeof(seghdr); + sz = fw->size; + + if (fw->size != size) { + /* Due to race conditions in firmware loading (esp. with + udev <0.95) the wrong file was sometimes loaded. So we check + filesizes to see if at least the right-sized file was + loaded. If not, then we retry. */ + CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n", + fn, size, fw->size); + release_firmware(fw); + retries--; + goto retry; + } + apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32]; + while (offset + sizeof(seghdr) < size) { + /* TODO: byteswapping */ + memcpy(&seghdr, src + offset / 4, sizeof(seghdr)); + offset += sizeof(seghdr); + if (seghdr.sync1 != APU_ROM_SYNC1 || + seghdr.sync2 != APU_ROM_SYNC2) { + offset += seghdr.size; + continue; + } + CX18_DEBUG_INFO("load segment %x-%x\n", seghdr.addr, + seghdr.addr + seghdr.size - 1); + if (offset + seghdr.size > sz) + break; + for (i = 0; i < seghdr.size; i += 4096) { + setup_page(offset + i); + for (j = i; j < seghdr.size && j < i + 4096; j += 4) { + /* no need for endianness conversion on the ppc */ + __raw_writel(src[(offset + j) / 4], dst + seghdr.addr + j); + if (__raw_readl(dst + seghdr.addr + j) != src[(offset + j) / 4]) { + CX18_ERR("Mismatch at offset %x\n", offset + j); + release_firmware(fw); + return -EIO; + } + } + } + offset += seghdr.size; + } + if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags)) + CX18_INFO("loaded %s firmware V%08x (%zd bytes)\n", + fn, apu_version, fw->size); + release_firmware(fw); + /* Clear bit0 for APU to start from 0 */ + write_reg(read_reg(0xc72030) & ~1, 0xc72030); + return size; +} + +void cx18_halt_firmware(struct cx18 *cx) +{ + CX18_DEBUG_INFO("Preparing for firmware halt.\n"); + write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ + write_reg(0x00020002, CX18_ADEC_CONTROL); +} + +void cx18_init_power(struct cx18 *cx, int lowpwr) +{ + /* power-down Spare and AOM PLLs */ + /* power-up fast, slow and mpeg PLLs */ + write_reg(0x00000008, CX18_PLL_POWER_DOWN); + + /* ADEC out of sleep */ + write_reg(0x00020000, CX18_ADEC_CONTROL); + + /* The fast clock is at 200/245 MHz */ + write_reg(lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT); + write_reg(lowpwr ? 0x1EFBF37 : 0x038E3D7, CX18_FAST_CLOCK_PLL_FRAC); + + write_reg(2, CX18_FAST_CLOCK_PLL_POST); + write_reg(1, CX18_FAST_CLOCK_PLL_PRESCALE); + write_reg(4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH); + + /* set slow clock to 125/120 MHz */ + write_reg(lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT); + write_reg(lowpwr ? 0xEBAF05 : 0x18618A8, CX18_SLOW_CLOCK_PLL_FRAC); + write_reg(4, CX18_SLOW_CLOCK_PLL_POST); + + /* mpeg clock pll 54MHz */ + write_reg(0xF, CX18_MPEG_CLOCK_PLL_INT); + write_reg(0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC); + write_reg(8, CX18_MPEG_CLOCK_PLL_POST); + + /* Defaults */ + /* APU = SC or SC/2 = 125/62.5 */ + /* EPU = SC = 125 */ + /* DDR = FC = 180 */ + /* ENC = SC = 125 */ + /* AI1 = SC = 125 */ + /* VIM2 = disabled */ + /* PCI = FC/2 = 90 */ + /* AI2 = disabled */ + /* DEMUX = disabled */ + /* AO = SC/2 = 62.5 */ + /* SER = 54MHz */ + /* VFC = disabled */ + /* USB = disabled */ + + write_reg(lowpwr ? 0xFFFF0020 : 0x00060004, CX18_CLOCK_SELECT1); + write_reg(lowpwr ? 0xFFFF0004 : 0x00060006, CX18_CLOCK_SELECT2); + + write_reg(0xFFFF0002, CX18_HALF_CLOCK_SELECT1); + write_reg(0xFFFF0104, CX18_HALF_CLOCK_SELECT2); + + write_reg(0xFFFF9026, CX18_CLOCK_ENABLE1); + write_reg(0xFFFF3105, CX18_CLOCK_ENABLE2); +} + +void cx18_init_memory(struct cx18 *cx) +{ + cx18_msleep_timeout(10, 0); + write_reg(0x10000, CX18_DDR_SOFT_RESET); + cx18_msleep_timeout(10, 0); + + write_reg(cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG); + + cx18_msleep_timeout(10, 0); + + write_reg(cx->card->ddr.refresh, CX18_DDR_REFRESH); + write_reg(cx->card->ddr.timing1, CX18_DDR_TIMING1); + write_reg(cx->card->ddr.timing2, CX18_DDR_TIMING2); + + cx18_msleep_timeout(10, 0); + + /* Initialize DQS pad time */ + write_reg(cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE); + write_reg(cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS); + + cx18_msleep_timeout(10, 0); + + write_reg(0x20000, CX18_DDR_SOFT_RESET); + cx18_msleep_timeout(10, 0); + + /* use power-down mode when idle */ + write_reg(0x00000010, CX18_DDR_POWER_REG); + + write_reg(0x10001, CX18_REG_BUS_TIMEOUT_EN); + + write_reg(0x48, CX18_DDR_MB_PER_ROW_7); + write_reg(0xE0000, CX18_DDR_BASE_63_ADDR); + + write_reg(0x00000101, CX18_WMB_CLIENT02); /* AO */ + write_reg(0x00000101, CX18_WMB_CLIENT09); /* AI2 */ + write_reg(0x00000101, CX18_WMB_CLIENT05); /* VIM1 */ + write_reg(0x00000101, CX18_WMB_CLIENT06); /* AI1 */ + write_reg(0x00000101, CX18_WMB_CLIENT07); /* 3D comb */ + write_reg(0x00000101, CX18_WMB_CLIENT10); /* ME */ + write_reg(0x00000101, CX18_WMB_CLIENT12); /* ENC */ + write_reg(0x00000101, CX18_WMB_CLIENT13); /* PK */ + write_reg(0x00000101, CX18_WMB_CLIENT11); /* RC */ + write_reg(0x00000101, CX18_WMB_CLIENT14); /* AVO */ +} + +int cx18_firmware_init(struct cx18 *cx) +{ + /* Allow chip to control CLKRUN */ + write_reg(0x5, CX18_DSP0_INTERRUPT_MASK); + + write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ + + cx18_msleep_timeout(1, 0); + + sw1_irq_enable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + sw2_irq_enable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + + /* Only if the processor is not running */ + if (read_reg(CX18_PROC_SOFT_RESET) & 8) { + int sz = load_apu_fw_direct("v4l-cx23418-apu.fw", + cx->enc_mem, cx, CX18_FW_APU_SIZE); + + sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw", + cx->enc_mem, cx, CX18_FW_CPU_SIZE); + + if (sz > 0) { + int retries = 0; + + /* start the CPU */ + write_reg(0x00080000, CX18_PROC_SOFT_RESET); + while (retries++ < 50) { /* Loop for max 500mS */ + if ((read_reg(CX18_PROC_SOFT_RESET) & 1) == 0) + break; + cx18_msleep_timeout(10, 0); + } + cx18_msleep_timeout(200, 0); + if (retries == 51) { + CX18_ERR("Could not start the CPU\n"); + return -EIO; + } + } + if (sz <= 0) + return -EIO; + } + /* initialize GPIO */ + write_reg(0x14001400, 0xC78110); + return 0; +} diff --git a/drivers/media/video/cx18/cx18-firmware.h b/drivers/media/video/cx18/cx18-firmware.h new file mode 100644 index 00000000000..38d4c05e849 --- /dev/null +++ b/drivers/media/video/cx18/cx18-firmware.h @@ -0,0 +1,25 @@ +/* + * cx18 firmware functions + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int cx18_firmware_init(struct cx18 *cx); +void cx18_halt_firmware(struct cx18 *cx); +void cx18_init_memory(struct cx18 *cx); +void cx18_init_power(struct cx18 *cx, int lowpwr); diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c new file mode 100644 index 00000000000..b302833f6f9 --- /dev/null +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -0,0 +1,124 @@ +/* + * cx18 gpio functions + * + * Derived from ivtv-gpio.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-cards.h" +#include "cx18-gpio.h" +#include "tuner-xc2028.h" + +/********************* GPIO stuffs *********************/ + +/* GPIO registers */ +#define CX18_REG_GPIO_IN 0xc72010 +#define CX18_REG_GPIO_OUT1 0xc78100 +#define CX18_REG_GPIO_DIR1 0xc78108 +#define CX18_REG_GPIO_OUT2 0xc78104 +#define CX18_REG_GPIO_DIR2 0xc7810c + +/* + * HVR-1600 GPIO pins, courtesy of Hauppauge: + * + * gpio0: zilog ir process reset pin + * gpio1: zilog programming pin (you should never use this) + * gpio12: cx24227 reset pin + * gpio13: cs5345 reset pin +*/ + +static void gpio_write(struct cx18 *cx) +{ + u32 dir = cx->gpio_dir; + u32 val = cx->gpio_val; + + write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + write_reg(((dir & 0xffff) << 16) | (val & 0xffff), + CX18_REG_GPIO_OUT1); + write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); + write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), + CX18_REG_GPIO_OUT2); +} + +void cx18_reset_i2c_slaves_gpio(struct cx18 *cx) +{ + const struct cx18_gpio_i2c_slave_reset *p; + + p = &cx->card->gpio_i2c_slave_reset; + + if ((p->active_lo_mask | p->active_hi_mask) == 0) + return; + + /* Assuming that the masks are a subset of the bits in gpio_dir */ + + /* Assert */ + cx->gpio_val = + (cx->gpio_val | p->active_hi_mask) & ~(p->active_lo_mask); + gpio_write(cx); + schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_asserted)); + + /* Deassert */ + cx->gpio_val = + (cx->gpio_val | p->active_lo_mask) & ~(p->active_hi_mask); + gpio_write(cx); + schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_recovery)); +} + +void cx18_gpio_init(struct cx18 *cx) +{ + cx->gpio_dir = cx->card->gpio_init.direction; + cx->gpio_val = cx->card->gpio_init.initial_value; + + if (cx->card->tuners[0].tuner == TUNER_XC2028) { + cx->gpio_dir |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; + } + + if (cx->gpio_dir == 0) + return; + + CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", + read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), + read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2)); + + gpio_write(cx); +} + +/* Xceive tuner reset function */ +int cx18_reset_tuner_gpio(void *dev, int cmd, int value) +{ + struct i2c_algo_bit_data *algo = dev; + struct cx18_i2c_algo_callback_data *cb_data = algo->data; + struct cx18 *cx = cb_data->cx; + + if (cmd != XC2028_TUNER_RESET) + return 0; + CX18_DEBUG_INFO("Resetting tuner\n"); + + cx->gpio_val &= ~(1 << cx->card->xceive_pin); + + gpio_write(cx); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + + cx->gpio_val |= 1 << cx->card->xceive_pin; + gpio_write(cx); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + return 0; +} diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h new file mode 100644 index 00000000000..525c328f748 --- /dev/null +++ b/drivers/media/video/cx18/cx18-gpio.h @@ -0,0 +1,25 @@ +/* + * cx18 gpio functions + * + * Derived from ivtv-gpio.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +void cx18_gpio_init(struct cx18 *cx); +void cx18_reset_i2c_slaves_gpio(struct cx18 *cx); +int cx18_reset_tuner_gpio(void *dev, int cmd, int value); diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c new file mode 100644 index 00000000000..680bc4e35b7 --- /dev/null +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -0,0 +1,433 @@ +/* + * cx18 I2C functions + * + * Derived from ivtv-i2c.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-cards.h" +#include "cx18-gpio.h" +#include "cx18-av-core.h" +#include "cx18-i2c.h" + +#include <media/ir-kbd-i2c.h> + +#define CX18_REG_I2C_1_WR 0xf15000 +#define CX18_REG_I2C_1_RD 0xf15008 +#define CX18_REG_I2C_2_WR 0xf25100 +#define CX18_REG_I2C_2_RD 0xf25108 + +#define SETSCL_BIT 0x0001 +#define SETSDL_BIT 0x0002 +#define GETSCL_BIT 0x0004 +#define GETSDL_BIT 0x0008 + +#ifndef I2C_ADAP_CLASS_TV_ANALOG +#define I2C_ADAP_CLASS_TV_ANALOG I2C_CLASS_TV_ANALOG +#endif + +#define CX18_CS5345_I2C_ADDR 0x4c + +/* This array should match the CX18_HW_ defines */ +static const u8 hw_driverids[] = { + I2C_DRIVERID_TUNER, + I2C_DRIVERID_TVEEPROM, + I2C_DRIVERID_CS5345, + 0, /* CX18_HW_GPIO dummy driver ID */ + 0 /* CX18_HW_CX23418 dummy driver ID */ +}; + +/* This array should match the CX18_HW_ defines */ +static const u8 hw_addrs[] = { + 0, + 0, + CX18_CS5345_I2C_ADDR, + 0, /* CX18_HW_GPIO dummy driver ID */ + 0, /* CX18_HW_CX23418 dummy driver ID */ +}; + +/* This array should match the CX18_HW_ defines */ +/* This might well become a card-specific array */ +static const u8 hw_bus[] = { + 0, + 0, + 0, + 0, /* CX18_HW_GPIO dummy driver ID */ + 0, /* CX18_HW_CX23418 dummy driver ID */ +}; + +/* This array should match the CX18_HW_ defines */ +static const char * const hw_devicenames[] = { + "tuner", + "tveeprom", + "cs5345", + "gpio", + "cx23418", +}; + +int cx18_i2c_register(struct cx18 *cx, unsigned idx) +{ + struct i2c_board_info info; + struct i2c_client *c; + u8 id, bus; + int i; + + CX18_DEBUG_I2C("i2c client register\n"); + if (idx >= ARRAY_SIZE(hw_driverids) || hw_driverids[idx] == 0) + return -1; + id = hw_driverids[idx]; + bus = hw_bus[idx]; + memset(&info, 0, sizeof(info)); + strlcpy(info.type, hw_devicenames[idx], sizeof(info.type)); + info.addr = hw_addrs[idx]; + for (i = 0; i < I2C_CLIENTS_MAX; i++) + if (cx->i2c_clients[i] == NULL) + break; + + if (i == I2C_CLIENTS_MAX) { + CX18_ERR("insufficient room for new I2C client!\n"); + return -ENOMEM; + } + + if (id != I2C_DRIVERID_TUNER) { + c = i2c_new_device(&cx->i2c_adap[bus], &info); + if (c->driver == NULL) + i2c_unregister_device(c); + else + cx->i2c_clients[i] = c; + return cx->i2c_clients[i] ? 0 : -ENODEV; + } + + /* special tuner handling */ + c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->radio); + if (c && c->driver == NULL) + i2c_unregister_device(c); + else if (c) + cx->i2c_clients[i++] = c; + c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->demod); + if (c && c->driver == NULL) + i2c_unregister_device(c); + else if (c) + cx->i2c_clients[i++] = c; + c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->tv); + if (c && c->driver == NULL) + i2c_unregister_device(c); + else if (c) + cx->i2c_clients[i++] = c; + return 0; +} + +static int attach_inform(struct i2c_client *client) +{ + return 0; +} + +static int detach_inform(struct i2c_client *client) +{ + int i; + struct cx18 *cx = (struct cx18 *)i2c_get_adapdata(client->adapter); + + CX18_DEBUG_I2C("i2c client detach\n"); + for (i = 0; i < I2C_CLIENTS_MAX; i++) { + if (cx->i2c_clients[i] == client) { + cx->i2c_clients[i] = NULL; + break; + } + } + CX18_DEBUG_I2C("i2c detach [client=%s,%s]\n", + client->name, (i < I2C_CLIENTS_MAX) ? "ok" : "failed"); + + return 0; +} + +static void cx18_setscl(void *data, int state) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; + u32 r = read_reg(addr); + + if (state) + write_reg_sync(r | SETSCL_BIT, addr); + else + write_reg_sync(r & ~SETSCL_BIT, addr); +} + +static void cx18_setsda(void *data, int state) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; + u32 r = read_reg(addr); + + if (state) + write_reg_sync(r | SETSDL_BIT, addr); + else + write_reg_sync(r & ~SETSDL_BIT, addr); +} + +static int cx18_getscl(void *data) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; + + return read_reg(addr) & GETSCL_BIT; +} + +static int cx18_getsda(void *data) +{ + struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; + int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; + u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; + + return read_reg(addr) & GETSDL_BIT; +} + +/* template for i2c-bit-algo */ +static struct i2c_adapter cx18_i2c_adap_template = { + .name = "cx18 i2c driver", + .id = I2C_HW_B_CX2341X, + .algo = NULL, /* set by i2c-algo-bit */ + .algo_data = NULL, /* filled from template */ + .client_register = attach_inform, + .client_unregister = detach_inform, + .owner = THIS_MODULE, +}; + +#define CX18_SCL_PERIOD (10) /* usecs. 10 usec is period for a 100 KHz clock */ +#define CX18_ALGO_BIT_TIMEOUT (2) /* seconds */ + +static struct i2c_algo_bit_data cx18_i2c_algo_template = { + .setsda = cx18_setsda, + .setscl = cx18_setscl, + .getsda = cx18_getsda, + .getscl = cx18_getscl, + .udelay = CX18_SCL_PERIOD/2, /* 1/2 clock period in usec*/ + .timeout = CX18_ALGO_BIT_TIMEOUT*HZ /* jiffies */ +}; + +static struct i2c_client cx18_i2c_client_template = { + .name = "cx18 internal", +}; + +int cx18_call_i2c_client(struct cx18 *cx, int addr, unsigned cmd, void *arg) +{ + struct i2c_client *client; + int retval; + int i; + + CX18_DEBUG_I2C("call_i2c_client addr=%02x\n", addr); + for (i = 0; i < I2C_CLIENTS_MAX; i++) { + client = cx->i2c_clients[i]; + if (client == NULL || client->driver == NULL || + client->driver->command == NULL) + continue; + if (addr == client->addr) { + retval = client->driver->command(client, cmd, arg); + return retval; + } + } + if (cmd != VIDIOC_G_CHIP_IDENT) + CX18_ERR("i2c addr 0x%02x not found for cmd 0x%x!\n", + addr, cmd); + return -ENODEV; +} + +/* Find the i2c device based on the driver ID and return + its i2c address or -ENODEV if no matching device was found. */ +static int cx18_i2c_id_addr(struct cx18 *cx, u32 id) +{ + struct i2c_client *client; + int retval = -ENODEV; + int i; + + for (i = 0; i < I2C_CLIENTS_MAX; i++) { + client = cx->i2c_clients[i]; + if (client == NULL || client->driver == NULL) + continue; + if (id == client->driver->id) { + retval = client->addr; + break; + } + } + return retval; +} + +/* Find the i2c device name matching the DRIVERID */ +static const char *cx18_i2c_id_name(u32 id) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) + if (hw_driverids[i] == id) + return hw_devicenames[i]; + return "unknown device"; +} + +/* Find the i2c device name matching the CX18_HW_ flag */ +static const char *cx18_i2c_hw_name(u32 hw) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) + if (1 << i == hw) + return hw_devicenames[i]; + return "unknown device"; +} + +/* Find the i2c device matching the CX18_HW_ flag and return + its i2c address or -ENODEV if no matching device was found. */ +int cx18_i2c_hw_addr(struct cx18 *cx, u32 hw) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) + if (1 << i == hw) + return cx18_i2c_id_addr(cx, hw_driverids[i]); + return -ENODEV; +} + +/* Calls i2c device based on CX18_HW_ flag. If hw == 0, then do nothing. + If hw == CX18_HW_GPIO then call the gpio handler. */ +int cx18_i2c_hw(struct cx18 *cx, u32 hw, unsigned int cmd, void *arg) +{ + int addr; + + if (hw == CX18_HW_GPIO || hw == 0) + return 0; + if (hw == CX18_HW_CX23418) + return cx18_av_cmd(cx, cmd, arg); + + addr = cx18_i2c_hw_addr(cx, hw); + if (addr < 0) { + CX18_ERR("i2c hardware 0x%08x (%s) not found for cmd 0x%x!\n", + hw, cx18_i2c_hw_name(hw), cmd); + return addr; + } + return cx18_call_i2c_client(cx, addr, cmd, arg); +} + +/* Calls i2c device based on I2C driver ID. */ +int cx18_i2c_id(struct cx18 *cx, u32 id, unsigned int cmd, void *arg) +{ + int addr; + + addr = cx18_i2c_id_addr(cx, id); + if (addr < 0) { + if (cmd != VIDIOC_G_CHIP_IDENT) + CX18_ERR("i2c ID 0x%08x (%s) not found for cmd 0x%x!\n", + id, cx18_i2c_id_name(id), cmd); + return addr; + } + return cx18_call_i2c_client(cx, addr, cmd, arg); +} + +/* broadcast cmd for all I2C clients and for the gpio subsystem */ +void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg) +{ + if (cx->i2c_adap[0].algo == NULL || cx->i2c_adap[1].algo == NULL) { + CX18_ERR("adapter is not set\n"); + return; + } + cx18_av_cmd(cx, cmd, arg); + i2c_clients_command(&cx->i2c_adap[0], cmd, arg); + i2c_clients_command(&cx->i2c_adap[1], cmd, arg); +} + +/* init + register i2c algo-bit adapter */ +int init_cx18_i2c(struct cx18 *cx) +{ + int i; + CX18_DEBUG_I2C("i2c init\n"); + + for (i = 0; i < 2; i++) { + memcpy(&cx->i2c_adap[i], &cx18_i2c_adap_template, + sizeof(struct i2c_adapter)); + memcpy(&cx->i2c_algo[i], &cx18_i2c_algo_template, + sizeof(struct i2c_algo_bit_data)); + cx->i2c_algo_cb_data[i].cx = cx; + cx->i2c_algo_cb_data[i].bus_index = i; + cx->i2c_algo[i].data = &cx->i2c_algo_cb_data[i]; + cx->i2c_adap[i].algo_data = &cx->i2c_algo[i]; + + sprintf(cx->i2c_adap[i].name + strlen(cx->i2c_adap[i].name), + " #%d-%d", cx->num, i); + i2c_set_adapdata(&cx->i2c_adap[i], cx); + + memcpy(&cx->i2c_client[i], &cx18_i2c_client_template, + sizeof(struct i2c_client)); + sprintf(cx->i2c_client[i].name + + strlen(cx->i2c_client[i].name), "%d", i); + cx->i2c_client[i].adapter = &cx->i2c_adap[i]; + cx->i2c_adap[i].dev.parent = &cx->dev->dev; + } + + if (read_reg(CX18_REG_I2C_2_WR) != 0x0003c02f) { + /* Reset/Unreset I2C hardware block */ + write_reg(0x10000000, 0xc71004); /* Clock select 220MHz */ + write_reg_sync(0x10001000, 0xc71024); /* Clock Enable */ + } + /* courtesy of Steven Toth <stoth@hauppauge.com> */ + write_reg_sync(0x00c00000, 0xc7001c); + mdelay(10); + write_reg_sync(0x00c000c0, 0xc7001c); + mdelay(10); + write_reg_sync(0x00c00000, 0xc7001c); + + write_reg_sync(0x00c00000, 0xc730c8); /* Set to edge-triggered intrs. */ + write_reg_sync(0x00c00000, 0xc730c4); /* Clear any stale intrs */ + + /* Hw I2C1 Clock Freq ~100kHz */ + write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_1_WR); + cx18_setscl(&cx->i2c_algo_cb_data[0], 1); + cx18_setsda(&cx->i2c_algo_cb_data[0], 1); + + /* Hw I2C2 Clock Freq ~100kHz */ + write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_2_WR); + cx18_setscl(&cx->i2c_algo_cb_data[1], 1); + cx18_setsda(&cx->i2c_algo_cb_data[1], 1); + + cx18_reset_i2c_slaves_gpio(cx); + + return i2c_bit_add_bus(&cx->i2c_adap[0]) || + i2c_bit_add_bus(&cx->i2c_adap[1]); +} + +void exit_cx18_i2c(struct cx18 *cx) +{ + int i; + CX18_DEBUG_I2C("i2c exit\n"); + write_reg(read_reg(CX18_REG_I2C_1_WR) | 4, CX18_REG_I2C_1_WR); + write_reg(read_reg(CX18_REG_I2C_2_WR) | 4, CX18_REG_I2C_2_WR); + + for (i = 0; i < 2; i++) { + i2c_del_adapter(&cx->i2c_adap[i]); + } +} + +/* + Hauppauge HVR1600 should have: + 32 cx24227 + 98 unknown + a0 eeprom + c2 tuner + e? zilog ir + */ diff --git a/drivers/media/video/cx18/cx18-i2c.h b/drivers/media/video/cx18/cx18-i2c.h new file mode 100644 index 00000000000..113c3f9a2cc --- /dev/null +++ b/drivers/media/video/cx18/cx18-i2c.h @@ -0,0 +1,33 @@ +/* + * cx18 I2C functions + * + * Derived from ivtv-i2c.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int cx18_i2c_hw_addr(struct cx18 *cx, u32 hw); +int cx18_i2c_hw(struct cx18 *cx, u32 hw, unsigned int cmd, void *arg); +int cx18_i2c_id(struct cx18 *cx, u32 id, unsigned int cmd, void *arg); +int cx18_call_i2c_client(struct cx18 *cx, int addr, unsigned cmd, void *arg); +void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg); +int cx18_i2c_register(struct cx18 *cx, unsigned idx); + +/* init + register i2c algo-bit adapter */ +int init_cx18_i2c(struct cx18 *cx); +void exit_cx18_i2c(struct cx18 *cx); diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c new file mode 100644 index 00000000000..4151f1e5493 --- /dev/null +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -0,0 +1,851 @@ +/* + * cx18 ioctl system call + * + * Derived from ivtv-ioctl.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-version.h" +#include "cx18-mailbox.h" +#include "cx18-i2c.h" +#include "cx18-queue.h" +#include "cx18-fileops.h" +#include "cx18-vbi.h" +#include "cx18-audio.h" +#include "cx18-video.h" +#include "cx18-streams.h" +#include "cx18-ioctl.h" +#include "cx18-gpio.h" +#include "cx18-controls.h" +#include "cx18-cards.h" +#include "cx18-av-core.h" +#include <media/tveeprom.h> +#include <media/v4l2-chip-ident.h> +#include <linux/i2c-id.h> + +u16 cx18_service2vbi(int type) +{ + switch (type) { + case V4L2_SLICED_TELETEXT_B: + return CX18_SLICED_TYPE_TELETEXT_B; + case V4L2_SLICED_CAPTION_525: + return CX18_SLICED_TYPE_CAPTION_525; + case V4L2_SLICED_WSS_625: + return CX18_SLICED_TYPE_WSS_625; + case V4L2_SLICED_VPS: + return CX18_SLICED_TYPE_VPS; + default: + return 0; + } +} + +static int valid_service_line(int field, int line, int is_pal) +{ + return (is_pal && line >= 6 && (line != 23 || field == 0)) || + (!is_pal && line >= 10 && line < 22); +} + +static u16 select_service_from_set(int field, int line, u16 set, int is_pal) +{ + u16 valid_set = (is_pal ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525); + int i; + + set = set & valid_set; + if (set == 0 || !valid_service_line(field, line, is_pal)) + return 0; + if (!is_pal) { + if (line == 21 && (set & V4L2_SLICED_CAPTION_525)) + return V4L2_SLICED_CAPTION_525; + } else { + if (line == 16 && field == 0 && (set & V4L2_SLICED_VPS)) + return V4L2_SLICED_VPS; + if (line == 23 && field == 0 && (set & V4L2_SLICED_WSS_625)) + return V4L2_SLICED_WSS_625; + if (line == 23) + return 0; + } + for (i = 0; i < 32; i++) { + if ((1 << i) & set) + return 1 << i; + } + return 0; +} + +void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + u16 set = fmt->service_set; + int f, l; + + fmt->service_set = 0; + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) + fmt->service_lines[f][l] = select_service_from_set(f, l, set, is_pal); + } +} + +static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + int f, l; + u16 set = 0; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal); + set |= fmt->service_lines[f][l]; + } + } + return set != 0; +} + +u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt) +{ + int f, l; + u16 set = 0; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) + set |= fmt->service_lines[f][l]; + } + return set; +} + +static const struct { + v4l2_std_id std; + char *name; +} enum_stds[] = { + { V4L2_STD_PAL_BG | V4L2_STD_PAL_H, "PAL-BGH" }, + { V4L2_STD_PAL_DK, "PAL-DK" }, + { V4L2_STD_PAL_I, "PAL-I" }, + { V4L2_STD_PAL_M, "PAL-M" }, + { V4L2_STD_PAL_N, "PAL-N" }, + { V4L2_STD_PAL_Nc, "PAL-Nc" }, + { V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H, "SECAM-BGH" }, + { V4L2_STD_SECAM_DK, "SECAM-DK" }, + { V4L2_STD_SECAM_L, "SECAM-L" }, + { V4L2_STD_SECAM_LC, "SECAM-L'" }, + { V4L2_STD_NTSC_M, "NTSC-M" }, + { V4L2_STD_NTSC_M_JP, "NTSC-J" }, + { V4L2_STD_NTSC_M_KR, "NTSC-K" }, +}; + +static const struct v4l2_standard cx18_std_60hz = { + .frameperiod = {.numerator = 1001, .denominator = 30000}, + .framelines = 525, +}; + +static const struct v4l2_standard cx18_std_50hz = { + .frameperiod = { .numerator = 1, .denominator = 25 }, + .framelines = 625, +}; + +static int cx18_cxc(struct cx18 *cx, unsigned int cmd, void *arg) +{ + struct v4l2_register *regs = arg; + unsigned long flags; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (regs->reg >= CX18_MEM_OFFSET + CX18_MEM_SIZE) + return -EINVAL; + + spin_lock_irqsave(&cx18_cards_lock, flags); + if (cmd == VIDIOC_DBG_G_REGISTER) + regs->val = read_enc(regs->reg); + else + write_enc(regs->val, regs->reg); + spin_unlock_irqrestore(&cx18_cards_lock, flags); + return 0; +} + +static int cx18_get_fmt(struct cx18 *cx, int streamtype, struct v4l2_format *fmt) +{ + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + fmt->fmt.pix.width = cx->params.width; + fmt->fmt.pix.height = cx->params.height; + fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + fmt->fmt.pix.field = V4L2_FIELD_INTERLACED; + if (streamtype == CX18_ENC_STREAM_TYPE_YUV) { + fmt->fmt.pix.pixelformat = V4L2_PIX_FMT_HM12; + /* YUV size is (Y=(h*w) + UV=(h*(w/2))) */ + fmt->fmt.pix.sizeimage = + fmt->fmt.pix.height * fmt->fmt.pix.width + + fmt->fmt.pix.height * (fmt->fmt.pix.width / 2); + } else { + fmt->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + fmt->fmt.pix.sizeimage = 128 * 1024; + } + break; + + case V4L2_BUF_TYPE_VBI_CAPTURE: + fmt->fmt.vbi.sampling_rate = 27000000; + fmt->fmt.vbi.offset = 248; + fmt->fmt.vbi.samples_per_line = cx->vbi.raw_decoder_line_size - 4; + fmt->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + fmt->fmt.vbi.start[0] = cx->vbi.start[0]; + fmt->fmt.vbi.start[1] = cx->vbi.start[1]; + fmt->fmt.vbi.count[0] = fmt->fmt.vbi.count[1] = cx->vbi.count; + break; + + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + { + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + memset(vbifmt->reserved, 0, sizeof(vbifmt->reserved)); + memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines)); + + cx18_av_cmd(cx, VIDIOC_G_FMT, fmt); + vbifmt->service_set = cx18_get_service_set(vbifmt); + break; + } + default: + return -EINVAL; + } + return 0; +} + +static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, + struct v4l2_format *fmt, int set_fmt) +{ + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + u16 set; + + /* set window size */ + if (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + int w = fmt->fmt.pix.width; + int h = fmt->fmt.pix.height; + + if (w > 720) + w = 720; + else if (w < 1) + w = 1; + if (h > (cx->is_50hz ? 576 : 480)) + h = (cx->is_50hz ? 576 : 480); + else if (h < 2) + h = 2; + cx18_get_fmt(cx, streamtype, fmt); + fmt->fmt.pix.width = w; + fmt->fmt.pix.height = h; + + if (!set_fmt || (cx->params.width == w && cx->params.height == h)) + return 0; + if (atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + + cx->params.width = w; + cx->params.height = h; + if (w != 720 || h != (cx->is_50hz ? 576 : 480)) + cx->params.video_temporal_filter = 0; + else + cx->params.video_temporal_filter = 8; + cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); + return cx18_get_fmt(cx, streamtype, fmt); + } + + /* set raw VBI format */ + if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI && + cx->vbi.sliced_in->service_set && + atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + if (set_fmt) { + cx->vbi.sliced_in->service_set = 0; + cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in); + } + return cx18_get_fmt(cx, streamtype, fmt); + } + + /* any else but sliced VBI capture is an error */ + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + + /* TODO: implement sliced VBI, for now silently return 0 */ + return 0; + + /* set sliced VBI capture format */ + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + memset(vbifmt->reserved, 0, sizeof(vbifmt->reserved)); + + if (vbifmt->service_set) + cx18_expand_service_set(vbifmt, cx->is_50hz); + set = check_service_set(vbifmt, cx->is_50hz); + vbifmt->service_set = cx18_get_service_set(vbifmt); + + if (!set_fmt) + return 0; + if (set == 0) + return -EINVAL; + if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0) + return -EBUSY; + cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); + memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); + return 0; +} + +static int cx18_debug_ioctls(struct file *filp, unsigned int cmd, void *arg) +{ + struct cx18_open_id *id = (struct cx18_open_id *)filp->private_data; + struct cx18 *cx = id->cx; + struct v4l2_register *reg = arg; + + switch (cmd) { + /* ioctls to allow direct access to the encoder registers for testing */ + case VIDIOC_DBG_G_REGISTER: + if (v4l2_chip_match_host(reg->match_type, reg->match_chip)) + return cx18_cxc(cx, cmd, arg); + if (reg->match_type == V4L2_CHIP_MATCH_I2C_DRIVER) + return cx18_i2c_id(cx, reg->match_chip, cmd, arg); + return cx18_call_i2c_client(cx, reg->match_chip, cmd, arg); + + case VIDIOC_DBG_S_REGISTER: + if (v4l2_chip_match_host(reg->match_type, reg->match_chip)) + return cx18_cxc(cx, cmd, arg); + if (reg->match_type == V4L2_CHIP_MATCH_I2C_DRIVER) + return cx18_i2c_id(cx, reg->match_chip, cmd, arg); + return cx18_call_i2c_client(cx, reg->match_chip, cmd, arg); + + case VIDIOC_G_CHIP_IDENT: { + struct v4l2_chip_ident *chip = arg; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (reg->match_type == V4L2_CHIP_MATCH_HOST) { + if (v4l2_chip_match_host(reg->match_type, reg->match_chip)) { + struct v4l2_chip_ident *chip = arg; + + chip->ident = V4L2_IDENT_CX23418; + } + return 0; + } + if (reg->match_type == V4L2_CHIP_MATCH_I2C_DRIVER) + return cx18_i2c_id(cx, reg->match_chip, cmd, arg); + if (reg->match_type == V4L2_CHIP_MATCH_I2C_ADDR) + return cx18_call_i2c_client(cx, reg->match_chip, cmd, arg); + return -EINVAL; + } + + case VIDIOC_INT_S_AUDIO_ROUTING: { + struct v4l2_routing *route = arg; + + cx18_audio_set_route(cx, route); + break; + } + + default: + return -EINVAL; + } + return 0; +} + +int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg) +{ + struct cx18_open_id *id = NULL; + + if (filp) + id = (struct cx18_open_id *)filp->private_data; + + switch (cmd) { + case VIDIOC_G_PRIORITY: + { + enum v4l2_priority *p = arg; + + *p = v4l2_prio_max(&cx->prio); + break; + } + + case VIDIOC_S_PRIORITY: + { + enum v4l2_priority *prio = arg; + + return v4l2_prio_change(&cx->prio, &id->prio, *prio); + } + + case VIDIOC_QUERYCAP:{ + struct v4l2_capability *vcap = arg; + + memset(vcap, 0, sizeof(*vcap)); + strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver)); + strlcpy(vcap->card, cx->card_name, sizeof(vcap->card)); + strlcpy(vcap->bus_info, pci_name(cx->dev), sizeof(vcap->bus_info)); + vcap->version = CX18_DRIVER_VERSION; /* version */ + vcap->capabilities = cx->v4l2_cap; /* capabilities */ + + /* reserved.. must set to 0! */ + vcap->reserved[0] = vcap->reserved[1] = + vcap->reserved[2] = vcap->reserved[3] = 0; + break; + } + + case VIDIOC_ENUMAUDIO:{ + struct v4l2_audio *vin = arg; + + return cx18_get_audio_input(cx, vin->index, vin); + } + + case VIDIOC_G_AUDIO:{ + struct v4l2_audio *vin = arg; + + vin->index = cx->audio_input; + return cx18_get_audio_input(cx, vin->index, vin); + } + + case VIDIOC_S_AUDIO:{ + struct v4l2_audio *vout = arg; + + if (vout->index >= cx->nof_audio_inputs) + return -EINVAL; + cx->audio_input = vout->index; + cx18_audio_set_io(cx); + break; + } + + case VIDIOC_ENUMINPUT:{ + struct v4l2_input *vin = arg; + + /* set it to defaults from our table */ + return cx18_get_input(cx, vin->index, vin); + } + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: { + struct v4l2_format *fmt = arg; + + return cx18_try_or_set_fmt(cx, id->type, fmt, cmd == VIDIOC_S_FMT); + } + + case VIDIOC_G_FMT: { + struct v4l2_format *fmt = arg; + int type = fmt->type; + + memset(fmt, 0, sizeof(*fmt)); + fmt->type = type; + return cx18_get_fmt(cx, id->type, fmt); + } + + case VIDIOC_CROPCAP: { + struct v4l2_cropcap *cropcap = arg; + + if (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + cropcap->bounds.top = cropcap->bounds.left = 0; + cropcap->bounds.width = 720; + cropcap->bounds.height = cx->is_50hz ? 576 : 480; + cropcap->pixelaspect.numerator = cx->is_50hz ? 59 : 10; + cropcap->pixelaspect.denominator = cx->is_50hz ? 54 : 11; + cropcap->defrect = cropcap->bounds; + return 0; + } + + case VIDIOC_S_CROP: { + struct v4l2_crop *crop = arg; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return cx18_av_cmd(cx, VIDIOC_S_CROP, arg); + } + + case VIDIOC_G_CROP: { + struct v4l2_crop *crop = arg; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return cx18_av_cmd(cx, VIDIOC_G_CROP, arg); + } + + case VIDIOC_ENUM_FMT: { + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "HM12 (YUV 4:1:1)", V4L2_PIX_FMT_HM12, + { 0, 0, 0, 0 } + }, + { 1, 0, V4L2_FMT_FLAG_COMPRESSED, + "MPEG", V4L2_PIX_FMT_MPEG, + { 0, 0, 0, 0 } + } + }; + struct v4l2_fmtdesc *fmt = arg; + enum v4l2_buf_type type = fmt->type; + + switch (type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + break; + default: + return -EINVAL; + } + if (fmt->index > 1) + return -EINVAL; + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; + } + + case VIDIOC_G_INPUT:{ + *(int *)arg = cx->active_input; + break; + } + + case VIDIOC_S_INPUT:{ + int inp = *(int *)arg; + + if (inp < 0 || inp >= cx->nof_inputs) + return -EINVAL; + + if (inp == cx->active_input) { + CX18_DEBUG_INFO("Input unchanged\n"); + break; + } + CX18_DEBUG_INFO("Changing input from %d to %d\n", + cx->active_input, inp); + + cx->active_input = inp; + /* Set the audio input to whatever is appropriate for the + input type. */ + cx->audio_input = cx->card->video_inputs[inp].audio_index; + + /* prevent others from messing with the streams until + we're finished changing inputs. */ + cx18_mute(cx); + cx18_video_set_io(cx); + cx18_audio_set_io(cx); + cx18_unmute(cx); + break; + } + + case VIDIOC_G_FREQUENCY:{ + struct v4l2_frequency *vf = arg; + + if (vf->tuner != 0) + return -EINVAL; + cx18_call_i2c_clients(cx, cmd, arg); + break; + } + + case VIDIOC_S_FREQUENCY:{ + struct v4l2_frequency vf = *(struct v4l2_frequency *)arg; + + if (vf.tuner != 0) + return -EINVAL; + + cx18_mute(cx); + CX18_DEBUG_INFO("v4l2 ioctl: set frequency %d\n", vf.frequency); + cx18_call_i2c_clients(cx, cmd, &vf); + cx18_unmute(cx); + break; + } + + case VIDIOC_ENUMSTD:{ + struct v4l2_standard *vs = arg; + int idx = vs->index; + + if (idx < 0 || idx >= ARRAY_SIZE(enum_stds)) + return -EINVAL; + + *vs = (enum_stds[idx].std & V4L2_STD_525_60) ? + cx18_std_60hz : cx18_std_50hz; + vs->index = idx; + vs->id = enum_stds[idx].std; + strlcpy(vs->name, enum_stds[idx].name, sizeof(vs->name)); + break; + } + + case VIDIOC_G_STD:{ + *(v4l2_std_id *) arg = cx->std; + break; + } + + case VIDIOC_S_STD: { + v4l2_std_id std = *(v4l2_std_id *) arg; + + if ((std & V4L2_STD_ALL) == 0) + return -EINVAL; + + if (std == cx->std) + break; + + if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) || + atomic_read(&cx->ana_capturing) > 0) { + /* Switching standard would turn off the radio or mess + with already running streams, prevent that by + returning EBUSY. */ + return -EBUSY; + } + + cx->std = std; + cx->is_60hz = (std & V4L2_STD_525_60) ? 1 : 0; + cx->params.is_50hz = cx->is_50hz = !cx->is_60hz; + cx->params.width = 720; + cx->params.height = cx->is_50hz ? 576 : 480; + cx->vbi.count = cx->is_50hz ? 18 : 12; + cx->vbi.start[0] = cx->is_50hz ? 6 : 10; + cx->vbi.start[1] = cx->is_50hz ? 318 : 273; + cx->vbi.sliced_decoder_line_size = cx->is_60hz ? 272 : 284; + CX18_DEBUG_INFO("Switching standard to %llx.\n", (unsigned long long)cx->std); + + /* Tuner */ + cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); + break; + } + + case VIDIOC_S_TUNER: { /* Setting tuner can only set audio mode */ + struct v4l2_tuner *vt = arg; + + if (vt->index != 0) + return -EINVAL; + + cx18_call_i2c_clients(cx, VIDIOC_S_TUNER, vt); + break; + } + + case VIDIOC_G_TUNER: { + struct v4l2_tuner *vt = arg; + + if (vt->index != 0) + return -EINVAL; + + memset(vt, 0, sizeof(*vt)); + cx18_call_i2c_clients(cx, VIDIOC_G_TUNER, vt); + + if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { + strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name)); + vt->type = V4L2_TUNER_RADIO; + } else { + strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name)); + vt->type = V4L2_TUNER_ANALOG_TV; + } + break; + } + + case VIDIOC_G_SLICED_VBI_CAP: { + struct v4l2_sliced_vbi_cap *cap = arg; + int set = cx->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; + int f, l; + enum v4l2_buf_type type = cap->type; + + memset(cap, 0, sizeof(*cap)); + cap->type = type; + if (type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + if (valid_service_line(f, l, cx->is_50hz)) + cap->service_lines[f][l] = set; + } + } + return 0; + } + return -EINVAL; + } + + case VIDIOC_ENCODER_CMD: + case VIDIOC_TRY_ENCODER_CMD: { + struct v4l2_encoder_cmd *enc = arg; + int try = cmd == VIDIOC_TRY_ENCODER_CMD; + + memset(&enc->raw, 0, sizeof(enc->raw)); + switch (enc->cmd) { + case V4L2_ENC_CMD_START: + enc->flags = 0; + if (try) + return 0; + return cx18_start_capture(id); + + case V4L2_ENC_CMD_STOP: + enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END; + if (try) + return 0; + cx18_stop_capture(id, enc->flags & V4L2_ENC_CMD_STOP_AT_GOP_END); + return 0; + + case V4L2_ENC_CMD_PAUSE: + enc->flags = 0; + if (try) + return 0; + if (!atomic_read(&cx->ana_capturing)) + return -EPERM; + if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) + return 0; + cx18_mute(cx); + cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, cx18_find_handle(cx)); + break; + + case V4L2_ENC_CMD_RESUME: + enc->flags = 0; + if (try) + return 0; + if (!atomic_read(&cx->ana_capturing)) + return -EPERM; + if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) + return 0; + cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, cx18_find_handle(cx)); + cx18_unmute(cx); + break; + default: + return -EINVAL; + } + break; + } + + case VIDIOC_LOG_STATUS: + { + struct v4l2_input vidin; + struct v4l2_audio audin; + int i; + + CX18_INFO("================= START STATUS CARD #%d =================\n", cx->num); + if (cx->hw_flags & CX18_HW_TVEEPROM) { + struct tveeprom tv; + + cx18_read_eeprom(cx, &tv); + } + cx18_call_i2c_clients(cx, VIDIOC_LOG_STATUS, NULL); + cx18_get_input(cx, cx->active_input, &vidin); + cx18_get_audio_input(cx, cx->audio_input, &audin); + CX18_INFO("Video Input: %s\n", vidin.name); + CX18_INFO("Audio Input: %s\n", audin.name); + CX18_INFO("Tuner: %s\n", + test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ? + "Radio" : "TV"); + cx2341x_log_status(&cx->params, cx->name); + CX18_INFO("Status flags: 0x%08lx\n", cx->i_flags); + for (i = 0; i < CX18_MAX_STREAMS; i++) { + struct cx18_stream *s = &cx->streams[i]; + + if (s->v4l2dev == NULL || s->buffers == 0) + continue; + CX18_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n", + s->name, s->s_flags, + (s->buffers - s->q_free.buffers) * 100 / s->buffers, + (s->buffers * s->buf_size) / 1024, s->buffers); + } + CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", + (long long)cx->mpg_data_received, + (long long)cx->vbi_data_inserted); + CX18_INFO("================== END STATUS CARD #%d ==================\n", cx->num); + break; + } + + default: + return -EINVAL; + } + return 0; +} + +static int cx18_v4l2_do_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, void *arg) +{ + struct cx18_open_id *id = (struct cx18_open_id *)filp->private_data; + struct cx18 *cx = id->cx; + int ret; + + /* check priority */ + switch (cmd) { + case VIDIOC_S_CTRL: + case VIDIOC_S_STD: + case VIDIOC_S_INPUT: + case VIDIOC_S_TUNER: + case VIDIOC_S_FREQUENCY: + case VIDIOC_S_FMT: + case VIDIOC_S_CROP: + case VIDIOC_S_EXT_CTRLS: + ret = v4l2_prio_check(&cx->prio, &id->prio); + if (ret) + return ret; + } + + switch (cmd) { + case VIDIOC_DBG_G_REGISTER: + case VIDIOC_DBG_S_REGISTER: + case VIDIOC_G_CHIP_IDENT: + case VIDIOC_INT_S_AUDIO_ROUTING: + case VIDIOC_INT_RESET: + if (cx18_debug & CX18_DBGFLG_IOCTL) { + printk(KERN_INFO "cx18%d ioctl: ", cx->num); + v4l_printk_ioctl(cmd); + } + return cx18_debug_ioctls(filp, cmd, arg); + + case VIDIOC_G_PRIORITY: + case VIDIOC_S_PRIORITY: + case VIDIOC_QUERYCAP: + case VIDIOC_ENUMINPUT: + case VIDIOC_G_INPUT: + case VIDIOC_S_INPUT: + case VIDIOC_G_FMT: + case VIDIOC_S_FMT: + case VIDIOC_TRY_FMT: + case VIDIOC_ENUM_FMT: + case VIDIOC_CROPCAP: + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + case VIDIOC_G_FREQUENCY: + case VIDIOC_S_FREQUENCY: + case VIDIOC_ENUMSTD: + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_S_TUNER: + case VIDIOC_G_TUNER: + case VIDIOC_ENUMAUDIO: + case VIDIOC_S_AUDIO: + case VIDIOC_G_AUDIO: + case VIDIOC_G_SLICED_VBI_CAP: + case VIDIOC_LOG_STATUS: + case VIDIOC_G_ENC_INDEX: + case VIDIOC_ENCODER_CMD: + case VIDIOC_TRY_ENCODER_CMD: + if (cx18_debug & CX18_DBGFLG_IOCTL) { + printk(KERN_INFO "cx18%d ioctl: ", cx->num); + v4l_printk_ioctl(cmd); + } + return cx18_v4l2_ioctls(cx, filp, cmd, arg); + + case VIDIOC_QUERYMENU: + case VIDIOC_QUERYCTRL: + case VIDIOC_S_CTRL: + case VIDIOC_G_CTRL: + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_G_EXT_CTRLS: + case VIDIOC_TRY_EXT_CTRLS: + if (cx18_debug & CX18_DBGFLG_IOCTL) { + printk(KERN_INFO "cx18%d ioctl: ", cx->num); + v4l_printk_ioctl(cmd); + } + return cx18_control_ioctls(cx, cmd, arg); + + case 0x00005401: /* Handle isatty() calls */ + return -EINVAL; + default: + return v4l_compat_translate_ioctl(inode, filp, cmd, arg, + cx18_v4l2_do_ioctl); + } + return 0; +} + +int cx18_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct cx18_open_id *id = (struct cx18_open_id *)filp->private_data; + struct cx18 *cx = id->cx; + int res; + + mutex_lock(&cx->serialize_lock); + res = video_usercopy(inode, filp, cmd, arg, cx18_v4l2_do_ioctl); + mutex_unlock(&cx->serialize_lock); + return res; +} diff --git a/drivers/media/video/cx18/cx18-ioctl.h b/drivers/media/video/cx18/cx18-ioctl.h new file mode 100644 index 00000000000..9f4c7eb2897 --- /dev/null +++ b/drivers/media/video/cx18/cx18-ioctl.h @@ -0,0 +1,30 @@ +/* + * cx18 ioctl system call + * + * Derived from ivtv-ioctl.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +u16 cx18_service2vbi(int type); +void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal); +u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt); +int cx18_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long arg); +int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, + void *arg); diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c new file mode 100644 index 00000000000..25114a5cbd5 --- /dev/null +++ b/drivers/media/video/cx18/cx18-irq.c @@ -0,0 +1,181 @@ +/* + * cx18 interrupt handling + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-firmware.h" +#include "cx18-fileops.h" +#include "cx18-queue.h" +#include "cx18-irq.h" +#include "cx18-ioctl.h" +#include "cx18-mailbox.h" +#include "cx18-vbi.h" +#include "cx18-scb.h" + +#define DMA_MAGIC_COOKIE 0x000001fe + +static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) +{ + u32 handle = mb->args[0]; + struct cx18_stream *s = NULL; + struct cx18_buffer *buf; + u32 off; + int i; + int id; + + for (i = 0; i < CX18_MAX_STREAMS; i++) { + s = &cx->streams[i]; + if ((handle == s->handle) && (s->dvb.enabled)) + break; + if (s->v4l2dev && handle == s->handle) + break; + } + if (i == CX18_MAX_STREAMS) { + CX18_WARN("DMA done for unknown handle %d for stream %s\n", + handle, s->name); + mb->error = CXERR_NOT_OPEN; + mb->cmd = 0; + cx18_mb_ack(cx, mb); + return; + } + + off = mb->args[1]; + if (mb->args[2] != 1) + CX18_WARN("Ack struct = %d for %s\n", + mb->args[2], s->name); + id = read_enc(off); + buf = cx18_queue_find_buf(s, id, read_enc(off + 4)); + CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id); + if (buf) { + cx18_buf_sync_for_cpu(s, buf); + if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) { + /* process the buffer here */ + CX18_DEBUG_HI_DMA("TS recv and sent bytesused=%d\n", + buf->bytesused); + + dvb_dmx_swfilter(&s->dvb.demux, buf->buf, + buf->bytesused); + + cx18_buf_sync_for_device(s, buf); + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); + } else + set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); + } else { + CX18_WARN("Could not find buf %d for stream %s\n", + read_enc(off), s->name); + } + mb->error = 0; + mb->cmd = 0; + cx18_mb_ack(cx, mb); + wake_up(&cx->dma_waitq); + if (s->id != -1) + wake_up(&s->waitq); +} + +static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb) +{ + char str[256] = { 0 }; + char *p; + + if (mb->args[1]) { + setup_page(mb->args[1]); + memcpy_fromio(str, cx->enc_mem + mb->args[1], 252); + str[252] = 0; + } + cx18_mb_ack(cx, mb); + CX18_DEBUG_INFO("%x %s\n", mb->args[0], str); + p = strchr(str, '.'); + if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags) && p && p > str) + CX18_INFO("FW version: %s\n", p - 1); +} + +static void hpu_cmd(struct cx18 *cx, u32 sw1) +{ + struct cx18_mailbox mb; + + if (sw1 & IRQ_CPU_TO_EPU) { + memcpy_fromio(&mb, &cx->scb->cpu2epu_mb, sizeof(mb)); + mb.error = 0; + + switch (mb.cmd) { + case CX18_EPU_DMA_DONE: + epu_dma_done(cx, &mb); + break; + case CX18_EPU_DEBUG: + epu_debug(cx, &mb); + break; + default: + CX18_WARN("Unexpected mailbox command %08x\n", mb.cmd); + break; + } + } + if (sw1 & (IRQ_APU_TO_EPU | IRQ_HPU_TO_EPU)) + CX18_WARN("Unexpected interrupt %08x\n", sw1); +} + +irqreturn_t cx18_irq_handler(int irq, void *dev_id) +{ + struct cx18 *cx = (struct cx18 *)dev_id; + u32 sw1, sw1_mask; + u32 sw2, sw2_mask; + u32 hw2, hw2_mask; + + spin_lock(&cx->dma_reg_lock); + + hw2_mask = read_reg(HW2_INT_MASK5_PCI); + hw2 = read_reg(HW2_INT_CLR_STATUS) & hw2_mask; + sw2_mask = read_reg(SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; + sw2 = read_reg(SW2_INT_STATUS) & sw2_mask; + sw1_mask = read_reg(SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; + sw1 = read_reg(SW1_INT_STATUS) & sw1_mask; + + write_reg(sw2&sw2_mask, SW2_INT_STATUS); + write_reg(sw1&sw1_mask, SW1_INT_STATUS); + write_reg(hw2&hw2_mask, HW2_INT_CLR_STATUS); + + if (sw1 || sw2 || hw2) + CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); + + /* To do: interrupt-based I2C handling + if (hw2 & 0x00c00000) { + } + */ + + if (sw2) { + if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) | + readl(&cx->scb->cpu2epu_irq_ack))) + wake_up(&cx->mb_cpu_waitq); + if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) | + readl(&cx->scb->apu2epu_irq_ack))) + wake_up(&cx->mb_apu_waitq); + if (sw2 & readl(&cx->scb->epu2hpu_irq_ack)) + wake_up(&cx->mb_epu_waitq); + if (sw2 & readl(&cx->scb->hpu2epu_irq_ack)) + wake_up(&cx->mb_hpu_waitq); + } + + if (sw1) + hpu_cmd(cx, sw1); + spin_unlock(&cx->dma_reg_lock); + + return (hw2 | sw1 | sw2) ? IRQ_HANDLED : IRQ_NONE; +} diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h new file mode 100644 index 00000000000..379f704f5cb --- /dev/null +++ b/drivers/media/video/cx18/cx18-irq.h @@ -0,0 +1,37 @@ +/* + * cx18 interrupt handling + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#define HW2_I2C1_INT (1 << 22) +#define HW2_I2C2_INT (1 << 23) +#define HW2_INT_CLR_STATUS 0xc730c4 +#define HW2_INT_MASK5_PCI 0xc730e4 +#define SW1_INT_SET 0xc73100 +#define SW1_INT_STATUS 0xc73104 +#define SW1_INT_ENABLE_PCI 0xc7311c +#define SW2_INT_SET 0xc73140 +#define SW2_INT_STATUS 0xc73144 +#define SW2_INT_ENABLE_PCI 0xc7315c + +irqreturn_t cx18_irq_handler(int irq, void *dev_id); + +void cx18_irq_work_handler(struct work_struct *work); +void cx18_dma_stream_dec_prepare(struct cx18_stream *s, u32 offset, int lock); +void cx18_unfinished_dma(unsigned long arg); diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c new file mode 100644 index 00000000000..2a5ccef9185 --- /dev/null +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -0,0 +1,372 @@ +/* + * cx18 mailbox functions + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include <stdarg.h> + +#include "cx18-driver.h" +#include "cx18-scb.h" +#include "cx18-irq.h" +#include "cx18-mailbox.h" + +#define API_FAST (1 << 2) /* Short timeout */ +#define API_SLOW (1 << 3) /* Additional 300ms timeout */ + +#define APU 0 +#define CPU 1 +#define EPU 2 +#define HPU 3 + +struct cx18_api_info { + u32 cmd; + u8 flags; /* Flags, see above */ + u8 rpu; /* Processing unit */ + const char *name; /* The name of the command */ +}; + +#define API_ENTRY(rpu, x, f) { (x), (f), (rpu), #x } + +static const struct cx18_api_info api_info[] = { + /* MPEG encoder API */ + API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE, 0), + API_ENTRY(CPU, CX18_EPU_DEBUG, 0), + API_ENTRY(CPU, CX18_CREATE_TASK, 0), + API_ENTRY(CPU, CX18_DESTROY_TASK, 0), + API_ENTRY(CPU, CX18_CPU_CAPTURE_START, API_SLOW), + API_ENTRY(CPU, CX18_CPU_CAPTURE_STOP, API_SLOW), + API_ENTRY(CPU, CX18_CPU_CAPTURE_PAUSE, 0), + API_ENTRY(CPU, CX18_CPU_CAPTURE_RESUME, 0), + API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE, 0), + API_ENTRY(CPU, CX18_CPU_SET_STREAM_OUTPUT_TYPE, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_IN, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_RATE, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_RESOLUTION, 0), + API_ENTRY(CPU, CX18_CPU_SET_FILTER_PARAM, 0), + API_ENTRY(CPU, CX18_CPU_SET_SPATIAL_FILTER_TYPE, 0), + API_ENTRY(CPU, CX18_CPU_SET_MEDIAN_CORING, 0), + API_ENTRY(CPU, CX18_CPU_SET_INDEXTABLE, 0), + API_ENTRY(CPU, CX18_CPU_SET_AUDIO_PARAMETERS, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_MUTE, 0), + API_ENTRY(CPU, CX18_CPU_SET_AUDIO_MUTE, 0), + API_ENTRY(CPU, CX18_CPU_SET_MISC_PARAMETERS, 0), + API_ENTRY(CPU, CX18_CPU_SET_RAW_VBI_PARAM, API_SLOW), + API_ENTRY(CPU, CX18_CPU_SET_CAPTURE_LINE_NO, 0), + API_ENTRY(CPU, CX18_CPU_SET_COPYRIGHT, 0), + API_ENTRY(CPU, CX18_CPU_SET_AUDIO_PID, 0), + API_ENTRY(CPU, CX18_CPU_SET_VIDEO_PID, 0), + API_ENTRY(CPU, CX18_CPU_SET_VER_CROP_LINE, 0), + API_ENTRY(CPU, CX18_CPU_SET_GOP_STRUCTURE, 0), + API_ENTRY(CPU, CX18_CPU_SET_SCENE_CHANGE_DETECTION, 0), + API_ENTRY(CPU, CX18_CPU_SET_ASPECT_RATIO, 0), + API_ENTRY(CPU, CX18_CPU_SET_SKIP_INPUT_FRAME, 0), + API_ENTRY(CPU, CX18_CPU_SET_SLICED_VBI_PARAM, 0), + API_ENTRY(CPU, CX18_CPU_SET_USERDATA_PLACE_HOLDER, 0), + API_ENTRY(CPU, CX18_CPU_GET_ENC_PTS, 0), + API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), + API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), + API_ENTRY(0, 0, 0), +}; + +static const struct cx18_api_info *find_api_info(u32 cmd) +{ + int i; + + for (i = 0; api_info[i].cmd; i++) + if (api_info[i].cmd == cmd) + return &api_info[i]; + return NULL; +} + +static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu, + u32 *state, u32 *irq, u32 *req) +{ + struct cx18_mailbox __iomem *mb = NULL; + int wait_count = 0; + u32 ack; + + switch (rpu) { + case APU: + mb = &cx->scb->epu2apu_mb; + *state = readl(&cx->scb->apu_state); + *irq = readl(&cx->scb->epu2apu_irq); + break; + + case CPU: + mb = &cx->scb->epu2cpu_mb; + *state = readl(&cx->scb->cpu_state); + *irq = readl(&cx->scb->epu2cpu_irq); + break; + + case HPU: + mb = &cx->scb->epu2hpu_mb; + *state = readl(&cx->scb->hpu_state); + *irq = readl(&cx->scb->epu2hpu_irq); + break; + } + + if (mb == NULL) + return mb; + + do { + *req = readl(&mb->request); + ack = readl(&mb->ack); + wait_count++; + } while (*req != ack && wait_count < 600); + + if (*req == ack) { + (*req)++; + if (*req == 0 || *req == 0xffffffff) + *req = 1; + return mb; + } + return NULL; +} + +long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) +{ + const struct cx18_api_info *info = find_api_info(mb->cmd); + struct cx18_mailbox __iomem *ack_mb; + u32 ack_irq; + u8 rpu = CPU; + + if (info == NULL && mb->cmd) { + CX18_WARN("Cannot ack unknown command %x\n", mb->cmd); + return -EINVAL; + } + if (info) + rpu = info->rpu; + + switch (rpu) { + case HPU: + ack_irq = IRQ_EPU_TO_HPU_ACK; + ack_mb = &cx->scb->hpu2epu_mb; + break; + case APU: + ack_irq = IRQ_EPU_TO_APU_ACK; + ack_mb = &cx->scb->apu2epu_mb; + break; + case CPU: + ack_irq = IRQ_EPU_TO_CPU_ACK; + ack_mb = &cx->scb->cpu2epu_mb; + break; + default: + CX18_WARN("Unknown RPU for command %x\n", mb->cmd); + return -EINVAL; + } + + setup_page(SCB_OFFSET); + write_sync(mb->request, &ack_mb->ack); + write_reg(ack_irq, SW2_INT_SET); + return 0; +} + + +static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) +{ + const struct cx18_api_info *info = find_api_info(cmd); + u32 state = 0, irq = 0, req, oldreq, err; + struct cx18_mailbox __iomem *mb; + wait_queue_head_t *waitq; + int timeout = 100; + int cnt = 0; + int sig = 0; + int i; + + if (info == NULL) { + CX18_WARN("unknown cmd %x\n", cmd); + return -EINVAL; + } + + if (cmd == CX18_CPU_DE_SET_MDL) + CX18_DEBUG_HI_API("%s\n", info->name); + else + CX18_DEBUG_API("%s\n", info->name); + setup_page(SCB_OFFSET); + mb = cx18_mb_is_complete(cx, info->rpu, &state, &irq, &req); + + if (mb == NULL) { + CX18_ERR("mb %s busy\n", info->name); + return -EBUSY; + } + + oldreq = req - 1; + writel(cmd, &mb->cmd); + for (i = 0; i < args; i++) + writel(data[i], &mb->args[i]); + writel(0, &mb->error); + writel(req, &mb->request); + + switch (info->rpu) { + case APU: waitq = &cx->mb_apu_waitq; break; + case CPU: waitq = &cx->mb_cpu_waitq; break; + case EPU: waitq = &cx->mb_epu_waitq; break; + case HPU: waitq = &cx->mb_hpu_waitq; break; + default: return -EINVAL; + } + if (info->flags & API_FAST) + timeout /= 2; + write_reg(irq, SW1_INT_SET); + + while (!sig && readl(&mb->ack) != readl(&mb->request) && cnt < 660) { + if (cnt > 200 && !in_atomic()) + sig = cx18_msleep_timeout(10, 1); + cnt++; + } + if (sig) + return -EINTR; + if (cnt == 660) { + writel(oldreq, &mb->request); + CX18_ERR("mb %s failed\n", info->name); + return -EINVAL; + } + for (i = 0; i < MAX_MB_ARGUMENTS; i++) + data[i] = readl(&mb->args[i]); + err = readl(&mb->error); + if (!in_atomic() && (info->flags & API_SLOW)) + cx18_msleep_timeout(300, 0); + if (err) + CX18_DEBUG_API("mailbox error %08x for command %s\n", err, + info->name); + return err ? -EIO : 0; +} + +int cx18_api(struct cx18 *cx, u32 cmd, int args, u32 data[]) +{ + int res = cx18_api_call(cx, cmd, args, data); + + /* Allow a single retry, probably already too late though. + If there is no free mailbox then that is usually an indication + of a more serious problem. */ + return (res == -EBUSY) ? cx18_api_call(cx, cmd, args, data) : res; +} + +static int cx18_set_filter_param(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + u32 mode; + int ret; + + mode = (cx->filter_mode & 1) ? 2 : (cx->spatial_strength ? 1 : 0); + ret = cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4, + s->handle, 1, mode, cx->spatial_strength); + mode = (cx->filter_mode & 2) ? 2 : (cx->temporal_strength ? 1 : 0); + ret = ret ? ret : cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4, + s->handle, 0, mode, cx->temporal_strength); + ret = ret ? ret : cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4, + s->handle, 2, cx->filter_mode >> 2, 0); + return ret; +} + +int cx18_api_func(void *priv, u32 cmd, int in, int out, + u32 data[CX2341X_MBOX_MAX_DATA]) +{ + struct cx18 *cx = priv; + struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_MPG]; + + switch (cmd) { + case CX2341X_ENC_SET_OUTPUT_PORT: + return 0; + case CX2341X_ENC_SET_FRAME_RATE: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_IN, 6, + s->handle, 0, 0, 0, 0, data[0]); + case CX2341X_ENC_SET_FRAME_SIZE: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RESOLUTION, 3, + s->handle, data[1], data[0]); + case CX2341X_ENC_SET_STREAM_TYPE: + return cx18_vapi(cx, CX18_CPU_SET_STREAM_OUTPUT_TYPE, 2, + s->handle, data[0]); + case CX2341X_ENC_SET_ASPECT_RATIO: + return cx18_vapi(cx, CX18_CPU_SET_ASPECT_RATIO, 2, + s->handle, data[0]); + + case CX2341X_ENC_SET_GOP_PROPERTIES: + return cx18_vapi(cx, CX18_CPU_SET_GOP_STRUCTURE, 3, + s->handle, data[0], data[1]); + case CX2341X_ENC_SET_GOP_CLOSURE: + return 0; + case CX2341X_ENC_SET_AUDIO_PROPERTIES: + return cx18_vapi(cx, CX18_CPU_SET_AUDIO_PARAMETERS, 2, + s->handle, data[0]); + case CX2341X_ENC_MUTE_AUDIO: + return cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, + s->handle, data[0]); + case CX2341X_ENC_SET_BIT_RATE: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RATE, 5, + s->handle, data[0], data[1], data[2], data[3]); + case CX2341X_ENC_MUTE_VIDEO: + return cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, + s->handle, data[0]); + case CX2341X_ENC_SET_FRAME_DROP_RATE: + return cx18_vapi(cx, CX18_CPU_SET_SKIP_INPUT_FRAME, 2, + s->handle, data[0]); + case CX2341X_ENC_MISC: + return cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 4, + s->handle, data[0], data[1], data[2]); + case CX2341X_ENC_SET_DNR_FILTER_MODE: + cx->filter_mode = (data[0] & 3) | (data[1] << 2); + return cx18_set_filter_param(s); + case CX2341X_ENC_SET_DNR_FILTER_PROPS: + cx->spatial_strength = data[0]; + cx->temporal_strength = data[1]; + return cx18_set_filter_param(s); + case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE: + return cx18_vapi(cx, CX18_CPU_SET_SPATIAL_FILTER_TYPE, 3, + s->handle, data[0], data[1]); + case CX2341X_ENC_SET_CORING_LEVELS: + return cx18_vapi(cx, CX18_CPU_SET_MEDIAN_CORING, 5, + s->handle, data[0], data[1], data[2], data[3]); + } + CX18_WARN("Unknown cmd %x\n", cmd); + return 0; +} + +int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS], + u32 cmd, int args, ...) +{ + va_list ap; + int i; + + va_start(ap, args); + for (i = 0; i < args; i++) + data[i] = va_arg(ap, u32); + va_end(ap); + return cx18_api(cx, cmd, args, data); +} + +int cx18_vapi(struct cx18 *cx, u32 cmd, int args, ...) +{ + u32 data[MAX_MB_ARGUMENTS]; + va_list ap; + int i; + + if (cx == NULL) { + CX18_ERR("cx == NULL (cmd=%x)\n", cmd); + return 0; + } + if (args > MAX_MB_ARGUMENTS) { + CX18_ERR("args too big (cmd=%x)\n", cmd); + args = MAX_MB_ARGUMENTS; + } + va_start(ap, args); + for (i = 0; i < args; i++) + data[i] = va_arg(ap, u32); + va_end(ap); + return cx18_api(cx, cmd, args, data); +} diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h new file mode 100644 index 00000000000..d995641536b --- /dev/null +++ b/drivers/media/video/cx18/cx18-mailbox.h @@ -0,0 +1,73 @@ +/* + * cx18 mailbox functions + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef _CX18_MAILBOX_H_ +#define _CX18_MAILBOX_H_ + +/* mailbox max args */ +#define MAX_MB_ARGUMENTS 6 +/* compatibility, should be same as the define in cx2341x.h */ +#define CX2341X_MBOX_MAX_DATA 16 + +#define MB_RESERVED_HANDLE_0 0 +#define MB_RESERVED_HANDLE_1 0xFFFFFFFF + +struct cx18; + +/* The cx18_mailbox struct is the mailbox structure which is used for passing + messages between processors */ +struct cx18_mailbox { + /* The sender sets a handle in 'request' after he fills the command. The + 'request' should be different than 'ack'. The sender, also, generates + an interrupt on XPU2YPU_irq where XPU is the sender and YPU is the + receiver. */ + u32 request; + /* The receiver detects a new command when 'req' is different than 'ack'. + He sets 'ack' to the same value as 'req' to clear the command. He, also, + generates an interrupt on YPU2XPU_irq where XPU is the sender and YPU + is the receiver. */ + u32 ack; + u32 reserved[6]; + /* 'cmd' identifies the command. The list of these commands are in + cx23418.h */ + u32 cmd; + /* Each command can have up to 6 arguments */ + u32 args[MAX_MB_ARGUMENTS]; + /* The return code can be one of the codes in the file cx23418.h. If the + command is completed successfuly, the error will be ERR_SYS_SUCCESS. + If it is pending, the code is ERR_SYS_PENDING. If it failed, the error + code would indicate the task from which the error originated and will + be one of the errors in cx23418.h. In that case, the following + applies ((error & 0xff) != 0). + If the command is pending, the return will be passed in a MB from the + receiver to the sender. 'req' will be returned in args[0] */ + u32 error; +}; + +int cx18_api(struct cx18 *cx, u32 cmd, int args, u32 data[]); +int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS], u32 cmd, + int args, ...); +int cx18_vapi(struct cx18 *cx, u32 cmd, int args, ...); +int cx18_api_func(void *priv, u32 cmd, int in, int out, + u32 data[CX2341X_MBOX_MAX_DATA]); +long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb); + +#endif diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c new file mode 100644 index 00000000000..6990b77c620 --- /dev/null +++ b/drivers/media/video/cx18/cx18-queue.c @@ -0,0 +1,272 @@ +/* + * cx18 buffer queues + * + * Derived from ivtv-queue.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-streams.h" +#include "cx18-queue.h" +#include "cx18-scb.h" + +void cx18_buf_swap(struct cx18_buffer *buf) +{ + int i; + + for (i = 0; i < buf->bytesused; i += 4) + swab32s((u32 *)(buf->buf + i)); +} + +void cx18_queue_init(struct cx18_queue *q) +{ + INIT_LIST_HEAD(&q->list); + q->buffers = 0; + q->length = 0; + q->bytesused = 0; +} + +void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf, + struct cx18_queue *q) +{ + unsigned long flags = 0; + + /* clear the buffer if it is going to be enqueued to the free queue */ + if (q == &s->q_free) { + buf->bytesused = 0; + buf->readpos = 0; + buf->b_flags = 0; + } + spin_lock_irqsave(&s->qlock, flags); + list_add_tail(&buf->list, &q->list); + q->buffers++; + q->length += s->buf_size; + q->bytesused += buf->bytesused - buf->readpos; + spin_unlock_irqrestore(&s->qlock, flags); +} + +struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) +{ + struct cx18_buffer *buf = NULL; + unsigned long flags = 0; + + spin_lock_irqsave(&s->qlock, flags); + if (!list_empty(&q->list)) { + buf = list_entry(q->list.next, struct cx18_buffer, list); + list_del_init(q->list.next); + q->buffers--; + q->length -= s->buf_size; + q->bytesused -= buf->bytesused - buf->readpos; + } + spin_unlock_irqrestore(&s->qlock, flags); + return buf; +} + +struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id, + u32 bytesused) +{ + struct cx18 *cx = s->cx; + struct list_head *p; + + list_for_each(p, &s->q_free.list) { + struct cx18_buffer *buf = + list_entry(p, struct cx18_buffer, list); + + if (buf->id != id) + continue; + buf->bytesused = bytesused; + /* the transport buffers are handled differently, + so there is no need to move them to the full queue */ + if (s->type == CX18_ENC_STREAM_TYPE_TS) + return buf; + s->q_free.buffers--; + s->q_free.length -= s->buf_size; + s->q_full.buffers++; + s->q_full.length += s->buf_size; + s->q_full.bytesused += buf->bytesused; + list_move_tail(&buf->list, &s->q_full.list); + return buf; + } + CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name); + return NULL; +} + +static void cx18_queue_move_buf(struct cx18_stream *s, struct cx18_queue *from, + struct cx18_queue *to, int clear, int full) +{ + struct cx18_buffer *buf = + list_entry(from->list.next, struct cx18_buffer, list); + + list_move_tail(from->list.next, &to->list); + from->buffers--; + from->length -= s->buf_size; + from->bytesused -= buf->bytesused - buf->readpos; + /* special handling for q_free */ + if (clear) + buf->bytesused = buf->readpos = buf->b_flags = 0; + else if (full) { + /* special handling for stolen buffers, assume + all bytes are used. */ + buf->bytesused = s->buf_size; + buf->readpos = buf->b_flags = 0; + } + to->buffers++; + to->length += s->buf_size; + to->bytesused += buf->bytesused - buf->readpos; +} + +/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'. + If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'. + If 'steal' != NULL, then buffers may also taken from that queue if + needed. + + The buffer is automatically cleared if it goes to the free queue. It is + also cleared if buffers need to be taken from the 'steal' queue and + the 'from' queue is the free queue. + + When 'from' is q_free, then needed_bytes is compared to the total + available buffer length, otherwise needed_bytes is compared to the + bytesused value. For the 'steal' queue the total available buffer + length is always used. + + -ENOMEM is returned if the buffers could not be obtained, 0 if all + buffers where obtained from the 'from' list and if non-zero then + the number of stolen buffers is returned. */ +static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from, + struct cx18_queue *steal, struct cx18_queue *to, + int needed_bytes) +{ + unsigned long flags; + int rc = 0; + int from_free = from == &s->q_free; + int to_free = to == &s->q_free; + int bytes_available; + + spin_lock_irqsave(&s->qlock, flags); + if (needed_bytes == 0) { + from_free = 1; + needed_bytes = from->length; + } + + bytes_available = from_free ? from->length : from->bytesused; + bytes_available += steal ? steal->length : 0; + + if (bytes_available < needed_bytes) { + spin_unlock_irqrestore(&s->qlock, flags); + return -ENOMEM; + } + if (from_free) { + u32 old_length = to->length; + + while (to->length - old_length < needed_bytes) { + if (list_empty(&from->list)) + from = steal; + if (from == steal) + rc++; /* keep track of 'stolen' buffers */ + cx18_queue_move_buf(s, from, to, 1, 0); + } + } else { + u32 old_bytesused = to->bytesused; + + while (to->bytesused - old_bytesused < needed_bytes) { + if (list_empty(&from->list)) + from = steal; + if (from == steal) + rc++; /* keep track of 'stolen' buffers */ + cx18_queue_move_buf(s, from, to, to_free, rc); + } + } + spin_unlock_irqrestore(&s->qlock, flags); + return rc; +} + +void cx18_flush_queues(struct cx18_stream *s) +{ + cx18_queue_move(s, &s->q_io, NULL, &s->q_free, 0); + cx18_queue_move(s, &s->q_full, NULL, &s->q_free, 0); +} + +int cx18_stream_alloc(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + int i; + + if (s->buffers == 0) + return 0; + + CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%dkB total)\n", + s->name, s->buffers, s->buf_size, + s->buffers * s->buf_size / 1024); + + if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] - + (char *)cx->scb) > SCB_RESERVED_SIZE) { + unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE - + ((char *)cx->scb->cpu_mdl)); + + CX18_ERR("Too many buffers, cannot fit in SCB area\n"); + CX18_ERR("Max buffers = %zd\n", + bufsz / sizeof(struct cx18_mdl)); + return -ENOMEM; + } + + s->mdl_offset = cx->mdl_offset; + + /* allocate stream buffers. Initially all buffers are in q_free. */ + for (i = 0; i < s->buffers; i++) { + struct cx18_buffer *buf = kzalloc(sizeof(struct cx18_buffer), + GFP_KERNEL|__GFP_NOWARN); + + if (buf == NULL) + break; + buf->buf = kmalloc(s->buf_size, GFP_KERNEL|__GFP_NOWARN); + if (buf->buf == NULL) { + kfree(buf); + break; + } + buf->id = cx->buffer_id++; + INIT_LIST_HEAD(&buf->list); + buf->dma_handle = pci_map_single(s->cx->dev, + buf->buf, s->buf_size, s->dma); + cx18_buf_sync_for_cpu(s, buf); + cx18_enqueue(s, buf, &s->q_free); + } + if (i == s->buffers) { + cx->mdl_offset += s->buffers; + return 0; + } + CX18_ERR("Couldn't allocate buffers for %s stream\n", s->name); + cx18_stream_free(s); + return -ENOMEM; +} + +void cx18_stream_free(struct cx18_stream *s) +{ + struct cx18_buffer *buf; + + /* move all buffers to q_free */ + cx18_flush_queues(s); + + /* empty q_free */ + while ((buf = cx18_dequeue(s, &s->q_free))) { + pci_unmap_single(s->cx->dev, buf->dma_handle, + s->buf_size, s->dma); + kfree(buf->buf); + kfree(buf); + } +} diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h new file mode 100644 index 00000000000..91423b9863a --- /dev/null +++ b/drivers/media/video/cx18/cx18-queue.h @@ -0,0 +1,55 @@ +/* + * cx18 buffer queues + * + * Derived from ivtv-queue.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#define CX18_DMA_UNMAPPED ((u32) -1) + +/* cx18_buffer utility functions */ + +static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s, + struct cx18_buffer *buf) +{ + pci_dma_sync_single_for_cpu(s->cx->dev, buf->dma_handle, + s->buf_size, s->dma); +} + +static inline void cx18_buf_sync_for_device(struct cx18_stream *s, + struct cx18_buffer *buf) +{ + pci_dma_sync_single_for_device(s->cx->dev, buf->dma_handle, + s->buf_size, s->dma); +} + +void cx18_buf_swap(struct cx18_buffer *buf); + +/* cx18_queue utility functions */ +void cx18_queue_init(struct cx18_queue *q); +void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf, + struct cx18_queue *q); +struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q); +struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id, + u32 bytesused); +void cx18_flush_queues(struct cx18_stream *s); + +/* cx18_stream utility functions */ +int cx18_stream_alloc(struct cx18_stream *s); +void cx18_stream_free(struct cx18_stream *s); diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/video/cx18/cx18-scb.c new file mode 100644 index 00000000000..30bc803e30d --- /dev/null +++ b/drivers/media/video/cx18/cx18-scb.c @@ -0,0 +1,121 @@ +/* + * cx18 System Control Block initialization + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-scb.h" + +void cx18_init_scb(struct cx18 *cx) +{ + setup_page(SCB_OFFSET); + memset_io(cx->scb, 0, 0x10000); + + writel(IRQ_APU_TO_CPU, &cx->scb->apu2cpu_irq); + writel(IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack); + writel(IRQ_HPU_TO_CPU, &cx->scb->hpu2cpu_irq); + writel(IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack); + writel(IRQ_PPU_TO_CPU, &cx->scb->ppu2cpu_irq); + writel(IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack); + writel(IRQ_EPU_TO_CPU, &cx->scb->epu2cpu_irq); + writel(IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack); + + writel(IRQ_CPU_TO_APU, &cx->scb->cpu2apu_irq); + writel(IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack); + writel(IRQ_HPU_TO_APU, &cx->scb->hpu2apu_irq); + writel(IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack); + writel(IRQ_PPU_TO_APU, &cx->scb->ppu2apu_irq); + writel(IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack); + writel(IRQ_EPU_TO_APU, &cx->scb->epu2apu_irq); + writel(IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack); + + writel(IRQ_CPU_TO_HPU, &cx->scb->cpu2hpu_irq); + writel(IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack); + writel(IRQ_APU_TO_HPU, &cx->scb->apu2hpu_irq); + writel(IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack); + writel(IRQ_PPU_TO_HPU, &cx->scb->ppu2hpu_irq); + writel(IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack); + writel(IRQ_EPU_TO_HPU, &cx->scb->epu2hpu_irq); + writel(IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack); + + writel(IRQ_CPU_TO_PPU, &cx->scb->cpu2ppu_irq); + writel(IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack); + writel(IRQ_APU_TO_PPU, &cx->scb->apu2ppu_irq); + writel(IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack); + writel(IRQ_HPU_TO_PPU, &cx->scb->hpu2ppu_irq); + writel(IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack); + writel(IRQ_EPU_TO_PPU, &cx->scb->epu2ppu_irq); + writel(IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack); + + writel(IRQ_CPU_TO_EPU, &cx->scb->cpu2epu_irq); + writel(IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack); + writel(IRQ_APU_TO_EPU, &cx->scb->apu2epu_irq); + writel(IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack); + writel(IRQ_HPU_TO_EPU, &cx->scb->hpu2epu_irq); + writel(IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack); + writel(IRQ_PPU_TO_EPU, &cx->scb->ppu2epu_irq); + writel(IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack); + + writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb), + &cx->scb->apu2cpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb), + &cx->scb->hpu2cpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb), + &cx->scb->ppu2cpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb), + &cx->scb->epu2cpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb), + &cx->scb->cpu2apu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb), + &cx->scb->hpu2apu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb), + &cx->scb->ppu2apu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb), + &cx->scb->epu2apu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb), + &cx->scb->cpu2hpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb), + &cx->scb->apu2hpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb), + &cx->scb->ppu2hpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb), + &cx->scb->epu2hpu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb), + &cx->scb->cpu2ppu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb), + &cx->scb->apu2ppu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb), + &cx->scb->hpu2ppu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb), + &cx->scb->epu2ppu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb), + &cx->scb->cpu2epu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb), + &cx->scb->apu2epu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb), + &cx->scb->hpu2epu_mb_offset); + writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb), + &cx->scb->ppu2epu_mb_offset); + + writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu_state), + &cx->scb->ipc_offset); + + writel(1, &cx->scb->hpu_state); + writel(1, &cx->scb->epu_state); +} diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h new file mode 100644 index 00000000000..86b4cb15d16 --- /dev/null +++ b/drivers/media/video/cx18/cx18-scb.h @@ -0,0 +1,285 @@ +/* + * cx18 System Control Block initialization + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_SCB_H +#define CX18_SCB_H + +#include "cx18-mailbox.h" + +/* NOTE: All ACK interrupts are in the SW2 register. All non-ACK interrupts + are in the SW1 register. */ + +#define IRQ_APU_TO_CPU 0x00000001 +#define IRQ_CPU_TO_APU_ACK 0x00000001 +#define IRQ_HPU_TO_CPU 0x00000002 +#define IRQ_CPU_TO_HPU_ACK 0x00000002 +#define IRQ_PPU_TO_CPU 0x00000004 +#define IRQ_CPU_TO_PPU_ACK 0x00000004 +#define IRQ_EPU_TO_CPU 0x00000008 +#define IRQ_CPU_TO_EPU_ACK 0x00000008 + +#define IRQ_CPU_TO_APU 0x00000010 +#define IRQ_APU_TO_CPU_ACK 0x00000010 +#define IRQ_HPU_TO_APU 0x00000020 +#define IRQ_APU_TO_HPU_ACK 0x00000020 +#define IRQ_PPU_TO_APU 0x00000040 +#define IRQ_APU_TO_PPU_ACK 0x00000040 +#define IRQ_EPU_TO_APU 0x00000080 +#define IRQ_APU_TO_EPU_ACK 0x00000080 + +#define IRQ_CPU_TO_HPU 0x00000100 +#define IRQ_HPU_TO_CPU_ACK 0x00000100 +#define IRQ_APU_TO_HPU 0x00000200 +#define IRQ_HPU_TO_APU_ACK 0x00000200 +#define IRQ_PPU_TO_HPU 0x00000400 +#define IRQ_HPU_TO_PPU_ACK 0x00000400 +#define IRQ_EPU_TO_HPU 0x00000800 +#define IRQ_HPU_TO_EPU_ACK 0x00000800 + +#define IRQ_CPU_TO_PPU 0x00001000 +#define IRQ_PPU_TO_CPU_ACK 0x00001000 +#define IRQ_APU_TO_PPU 0x00002000 +#define IRQ_PPU_TO_APU_ACK 0x00002000 +#define IRQ_HPU_TO_PPU 0x00004000 +#define IRQ_PPU_TO_HPU_ACK 0x00004000 +#define IRQ_EPU_TO_PPU 0x00008000 +#define IRQ_PPU_TO_EPU_ACK 0x00008000 + +#define IRQ_CPU_TO_EPU 0x00010000 +#define IRQ_EPU_TO_CPU_ACK 0x00010000 +#define IRQ_APU_TO_EPU 0x00020000 +#define IRQ_EPU_TO_APU_ACK 0x00020000 +#define IRQ_HPU_TO_EPU 0x00040000 +#define IRQ_EPU_TO_HPU_ACK 0x00040000 +#define IRQ_PPU_TO_EPU 0x00080000 +#define IRQ_EPU_TO_PPU_ACK 0x00080000 + +#define SCB_OFFSET 0xDC0000 + +/* If Firmware uses fixed memory map, it shall not allocate the area + between SCB_OFFSET and SCB_OFFSET+SCB_RESERVED_SIZE-1 inclusive */ +#define SCB_RESERVED_SIZE 0x10000 + + +/* This structure is used by EPU to provide memory descriptors in its memory */ +struct cx18_mdl { + u32 paddr; /* Physical address of a buffer segment */ + u32 length; /* Length of the buffer segment */ +}; + +/* This structure is used by CPU to provide completed buffers information */ +struct cx18_mdl_ack { + u32 id; /* ID of a completed MDL */ + u32 data_used; /* Total data filled in the MDL for buffer 'id' */ +}; + +struct cx18_scb { + /* These fields form the System Control Block which is used at boot time + for localizing the IPC data as well as the code positions for all + processors. The offsets are from the start of this struct. */ + + /* Offset where to find the Inter-Processor Communication data */ + u32 ipc_offset; + u32 reserved01[7]; + /* Offset where to find the start of the CPU code */ + u32 cpu_code_offset; + u32 reserved02[3]; + /* Offset where to find the start of the APU code */ + u32 apu_code_offset; + u32 reserved03[3]; + /* Offset where to find the start of the HPU code */ + u32 hpu_code_offset; + u32 reserved04[3]; + /* Offset where to find the start of the PPU code */ + u32 ppu_code_offset; + u32 reserved05[3]; + + /* These fields form Inter-Processor Communication data which is used + by all processors to locate the information needed for communicating + with other processors */ + + /* Fields for CPU: */ + + /* bit 0: 1/0 processor ready/not ready. Set other bits to 0. */ + u32 cpu_state; + u32 reserved1[7]; + /* Offset to the mailbox used for sending commands from APU to CPU */ + u32 apu2cpu_mb_offset; + /* Value to write to register SW1 register set (0xC7003100) after the + command is ready */ + u32 apu2cpu_irq; + /* Value to write to register SW2 register set (0xC7003140) after the + command is cleared */ + u32 apu2cpu_irq_ack; + u32 reserved2[13]; + + u32 hpu2cpu_mb_offset; + u32 hpu2cpu_irq; + u32 hpu2cpu_irq_ack; + u32 reserved3[13]; + + u32 ppu2cpu_mb_offset; + u32 ppu2cpu_irq; + u32 ppu2cpu_irq_ack; + u32 reserved4[13]; + + u32 epu2cpu_mb_offset; + u32 epu2cpu_irq; + u32 epu2cpu_irq_ack; + u32 reserved5[13]; + u32 reserved6[8]; + + /* Fields for APU: */ + + u32 apu_state; + u32 reserved11[7]; + u32 cpu2apu_mb_offset; + u32 cpu2apu_irq; + u32 cpu2apu_irq_ack; + u32 reserved12[13]; + + u32 hpu2apu_mb_offset; + u32 hpu2apu_irq; + u32 hpu2apu_irq_ack; + u32 reserved13[13]; + + u32 ppu2apu_mb_offset; + u32 ppu2apu_irq; + u32 ppu2apu_irq_ack; + u32 reserved14[13]; + + u32 epu2apu_mb_offset; + u32 epu2apu_irq; + u32 epu2apu_irq_ack; + u32 reserved15[13]; + u32 reserved16[8]; + + /* Fields for HPU: */ + + u32 hpu_state; + u32 reserved21[7]; + u32 cpu2hpu_mb_offset; + u32 cpu2hpu_irq; + u32 cpu2hpu_irq_ack; + u32 reserved22[13]; + + u32 apu2hpu_mb_offset; + u32 apu2hpu_irq; + u32 apu2hpu_irq_ack; + u32 reserved23[13]; + + u32 ppu2hpu_mb_offset; + u32 ppu2hpu_irq; + u32 ppu2hpu_irq_ack; + u32 reserved24[13]; + + u32 epu2hpu_mb_offset; + u32 epu2hpu_irq; + u32 epu2hpu_irq_ack; + u32 reserved25[13]; + u32 reserved26[8]; + + /* Fields for PPU: */ + + u32 ppu_state; + u32 reserved31[7]; + u32 cpu2ppu_mb_offset; + u32 cpu2ppu_irq; + u32 cpu2ppu_irq_ack; + u32 reserved32[13]; + + u32 apu2ppu_mb_offset; + u32 apu2ppu_irq; + u32 apu2ppu_irq_ack; + u32 reserved33[13]; + + u32 hpu2ppu_mb_offset; + u32 hpu2ppu_irq; + u32 hpu2ppu_irq_ack; + u32 reserved34[13]; + + u32 epu2ppu_mb_offset; + u32 epu2ppu_irq; + u32 epu2ppu_irq_ack; + u32 reserved35[13]; + u32 reserved36[8]; + + /* Fields for EPU: */ + + u32 epu_state; + u32 reserved41[7]; + u32 cpu2epu_mb_offset; + u32 cpu2epu_irq; + u32 cpu2epu_irq_ack; + u32 reserved42[13]; + + u32 apu2epu_mb_offset; + u32 apu2epu_irq; + u32 apu2epu_irq_ack; + u32 reserved43[13]; + + u32 hpu2epu_mb_offset; + u32 hpu2epu_irq; + u32 hpu2epu_irq_ack; + u32 reserved44[13]; + + u32 ppu2epu_mb_offset; + u32 ppu2epu_irq; + u32 ppu2epu_irq_ack; + u32 reserved45[13]; + u32 reserved46[8]; + + u32 semaphores[8]; /* Semaphores */ + + u32 reserved50[32]; /* Reserved for future use */ + + struct cx18_mailbox apu2cpu_mb; + struct cx18_mailbox hpu2cpu_mb; + struct cx18_mailbox ppu2cpu_mb; + struct cx18_mailbox epu2cpu_mb; + + struct cx18_mailbox cpu2apu_mb; + struct cx18_mailbox hpu2apu_mb; + struct cx18_mailbox ppu2apu_mb; + struct cx18_mailbox epu2apu_mb; + + struct cx18_mailbox cpu2hpu_mb; + struct cx18_mailbox apu2hpu_mb; + struct cx18_mailbox ppu2hpu_mb; + struct cx18_mailbox epu2hpu_mb; + + struct cx18_mailbox cpu2ppu_mb; + struct cx18_mailbox apu2ppu_mb; + struct cx18_mailbox hpu2ppu_mb; + struct cx18_mailbox epu2ppu_mb; + + struct cx18_mailbox cpu2epu_mb; + struct cx18_mailbox apu2epu_mb; + struct cx18_mailbox hpu2epu_mb; + struct cx18_mailbox ppu2epu_mb; + + struct cx18_mdl_ack cpu_mdl_ack[CX18_MAX_STREAMS][2]; + struct cx18_mdl cpu_mdl[1]; +}; + +void cx18_init_scb(struct cx18 *cx); + +#endif diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c new file mode 100644 index 00000000000..1b921a33609 --- /dev/null +++ b/drivers/media/video/cx18/cx18-streams.c @@ -0,0 +1,574 @@ +/* + * cx18 init/start/stop/exit stream functions + * + * Derived from ivtv-streams.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-fileops.h" +#include "cx18-mailbox.h" +#include "cx18-i2c.h" +#include "cx18-queue.h" +#include "cx18-ioctl.h" +#include "cx18-streams.h" +#include "cx18-cards.h" +#include "cx18-scb.h" +#include "cx18-av-core.h" +#include "cx18-dvb.h" + +#define CX18_DSP0_INTERRUPT_MASK 0xd0004C + +static struct file_operations cx18_v4l2_enc_fops = { + .owner = THIS_MODULE, + .read = cx18_v4l2_read, + .open = cx18_v4l2_open, + .ioctl = cx18_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = cx18_v4l2_close, + .poll = cx18_v4l2_enc_poll, +}; + +/* offset from 0 to register ts v4l2 minors on */ +#define CX18_V4L2_ENC_TS_OFFSET 16 +/* offset from 0 to register pcm v4l2 minors on */ +#define CX18_V4L2_ENC_PCM_OFFSET 24 +/* offset from 0 to register yuv v4l2 minors on */ +#define CX18_V4L2_ENC_YUV_OFFSET 32 + +static struct { + const char *name; + int vfl_type; + int minor_offset; + int dma; + enum v4l2_buf_type buf_type; + struct file_operations *fops; +} cx18_stream_info[] = { + { /* CX18_ENC_STREAM_TYPE_MPG */ + "encoder MPEG", + VFL_TYPE_GRABBER, 0, + PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + &cx18_v4l2_enc_fops + }, + { /* CX18_ENC_STREAM_TYPE_TS */ + "TS", + VFL_TYPE_GRABBER, -1, + PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + &cx18_v4l2_enc_fops + }, + { /* CX18_ENC_STREAM_TYPE_YUV */ + "encoder YUV", + VFL_TYPE_GRABBER, CX18_V4L2_ENC_YUV_OFFSET, + PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + &cx18_v4l2_enc_fops + }, + { /* CX18_ENC_STREAM_TYPE_VBI */ + "encoder VBI", + VFL_TYPE_VBI, 0, + PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VBI_CAPTURE, + &cx18_v4l2_enc_fops + }, + { /* CX18_ENC_STREAM_TYPE_PCM */ + "encoder PCM audio", + VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET, + PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_PRIVATE, + &cx18_v4l2_enc_fops + }, + { /* CX18_ENC_STREAM_TYPE_IDX */ + "encoder IDX", + VFL_TYPE_GRABBER, -1, + PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + &cx18_v4l2_enc_fops + }, + { /* CX18_ENC_STREAM_TYPE_RAD */ + "encoder radio", + VFL_TYPE_RADIO, 0, + PCI_DMA_NONE, V4L2_BUF_TYPE_PRIVATE, + &cx18_v4l2_enc_fops + }, +}; + +static void cx18_stream_init(struct cx18 *cx, int type) +{ + struct cx18_stream *s = &cx->streams[type]; + struct video_device *dev = s->v4l2dev; + u32 max_size = cx->options.megabytes[type] * 1024 * 1024; + + /* we need to keep v4l2dev, so restore it afterwards */ + memset(s, 0, sizeof(*s)); + s->v4l2dev = dev; + + /* initialize cx18_stream fields */ + s->cx = cx; + s->type = type; + s->name = cx18_stream_info[type].name; + s->handle = 0xffffffff; + + s->dma = cx18_stream_info[type].dma; + s->buf_size = cx->stream_buf_size[type]; + if (s->buf_size) + s->buffers = max_size / s->buf_size; + if (s->buffers > 63) { + /* Each stream has a maximum of 63 buffers, + ensure we do not exceed that. */ + s->buffers = 63; + s->buf_size = (max_size / s->buffers) & ~0xfff; + } + spin_lock_init(&s->qlock); + init_waitqueue_head(&s->waitq); + s->id = -1; + cx18_queue_init(&s->q_free); + cx18_queue_init(&s->q_full); + cx18_queue_init(&s->q_io); +} + +static int cx18_prep_dev(struct cx18 *cx, int type) +{ + struct cx18_stream *s = &cx->streams[type]; + u32 cap = cx->v4l2_cap; + int minor_offset = cx18_stream_info[type].minor_offset; + int minor; + + /* These four fields are always initialized. If v4l2dev == NULL, then + this stream is not in use. In that case no other fields but these + four can be used. */ + s->v4l2dev = NULL; + s->cx = cx; + s->type = type; + s->name = cx18_stream_info[type].name; + + /* Check whether the radio is supported */ + if (type == CX18_ENC_STREAM_TYPE_RAD && !(cap & V4L2_CAP_RADIO)) + return 0; + + /* Check whether VBI is supported */ + if (type == CX18_ENC_STREAM_TYPE_VBI && + !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE))) + return 0; + + /* card number + user defined offset + device offset */ + minor = cx->num + cx18_first_minor + minor_offset; + + /* User explicitly selected 0 buffers for these streams, so don't + create them. */ + if (cx18_stream_info[type].dma != PCI_DMA_NONE && + cx->options.megabytes[type] == 0) { + CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name); + return 0; + } + + cx18_stream_init(cx, type); + + if (minor_offset == -1) + return 0; + + /* allocate and initialize the v4l2 video device structure */ + s->v4l2dev = video_device_alloc(); + if (s->v4l2dev == NULL) { + CX18_ERR("Couldn't allocate v4l2 video_device for %s\n", + s->name); + return -ENOMEM; + } + + s->v4l2dev->type = + VID_TYPE_CAPTURE | VID_TYPE_TUNER | VID_TYPE_TELETEXT | + VID_TYPE_CLIPPING | VID_TYPE_SCALES | VID_TYPE_MPEG_ENCODER; + snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "cx18%d %s", + cx->num, s->name); + + s->v4l2dev->minor = minor; + s->v4l2dev->dev = &cx->dev->dev; + s->v4l2dev->fops = cx18_stream_info[type].fops; + s->v4l2dev->release = video_device_release; + + return 0; +} + +/* Initialize v4l2 variables and register v4l2 devices */ +int cx18_streams_setup(struct cx18 *cx) +{ + int type; + + /* Setup V4L2 Devices */ + for (type = 0; type < CX18_MAX_STREAMS; type++) { + /* Prepare device */ + if (cx18_prep_dev(cx, type)) + break; + + /* Allocate Stream */ + if (cx18_stream_alloc(&cx->streams[type])) + break; + } + if (type == CX18_MAX_STREAMS) + return 0; + + /* One or more streams could not be initialized. Clean 'em all up. */ + cx18_streams_cleanup(cx, 0); + return -ENOMEM; +} + +static int cx18_reg_dev(struct cx18 *cx, int type) +{ + struct cx18_stream *s = &cx->streams[type]; + int vfl_type = cx18_stream_info[type].vfl_type; + int minor; + + /* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something? + * We need a VFL_TYPE_TS defined. + */ + if (strcmp("TS", s->name) == 0) { + /* just return if no DVB is supported */ + if ((cx->card->hw_all & CX18_HW_DVB) == 0) + return 0; + if (cx18_dvb_register(s) < 0) { + CX18_ERR("DVB failed to register\n"); + return -EINVAL; + } + } + + if (s->v4l2dev == NULL) + return 0; + + minor = s->v4l2dev->minor; + + /* Register device. First try the desired minor, then any free one. */ + if (video_register_device(s->v4l2dev, vfl_type, minor) && + video_register_device(s->v4l2dev, vfl_type, -1)) { + CX18_ERR("Couldn't register v4l2 device for %s minor %d\n", + s->name, minor); + video_device_release(s->v4l2dev); + s->v4l2dev = NULL; + return -ENOMEM; + } + minor = s->v4l2dev->minor; + + switch (vfl_type) { + case VFL_TYPE_GRABBER: + CX18_INFO("Registered device video%d for %s (%d MB)\n", + minor, s->name, cx->options.megabytes[type]); + break; + + case VFL_TYPE_RADIO: + CX18_INFO("Registered device radio%d for %s\n", + minor - MINOR_VFL_TYPE_RADIO_MIN, s->name); + break; + + case VFL_TYPE_VBI: + if (cx->options.megabytes[type]) + CX18_INFO("Registered device vbi%d for %s (%d MB)\n", + minor - MINOR_VFL_TYPE_VBI_MIN, + s->name, cx->options.megabytes[type]); + else + CX18_INFO("Registered device vbi%d for %s\n", + minor - MINOR_VFL_TYPE_VBI_MIN, s->name); + break; + } + + return 0; +} + +/* Register v4l2 devices */ +int cx18_streams_register(struct cx18 *cx) +{ + int type; + int err = 0; + + /* Register V4L2 devices */ + for (type = 0; type < CX18_MAX_STREAMS; type++) + err |= cx18_reg_dev(cx, type); + + if (err == 0) + return 0; + + /* One or more streams could not be initialized. Clean 'em all up. */ + cx18_streams_cleanup(cx, 1); + return -ENOMEM; +} + +/* Unregister v4l2 devices */ +void cx18_streams_cleanup(struct cx18 *cx, int unregister) +{ + struct video_device *vdev; + int type; + + /* Teardown all streams */ + for (type = 0; type < CX18_MAX_STREAMS; type++) { + if (cx->streams[type].dvb.enabled) + cx18_dvb_unregister(&cx->streams[type]); + + vdev = cx->streams[type].v4l2dev; + + cx->streams[type].v4l2dev = NULL; + if (vdev == NULL) + continue; + + cx18_stream_free(&cx->streams[type]); + + /* Unregister or release device */ + if (unregister) + video_unregister_device(vdev); + else + video_device_release(vdev); + } +} + +static void cx18_vbi_setup(struct cx18_stream *s) +{ + struct cx18 *cx = s->cx; + int raw = cx->vbi.sliced_in->service_set == 0; + u32 data[CX2341X_MBOX_MAX_DATA]; + int lines; + + if (cx->is_60hz) { + cx->vbi.count = 12; + cx->vbi.start[0] = 10; + cx->vbi.start[1] = 273; + } else { /* PAL/SECAM */ + cx->vbi.count = 18; + cx->vbi.start[0] = 6; + cx->vbi.start[1] = 318; + } + + /* setup VBI registers */ + cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in); + + /* determine number of lines and total number of VBI bytes. + A raw line takes 1443 bytes: 2 * 720 + 4 byte frame header - 1 + The '- 1' byte is probably an unused U or V byte. Or something... + A sliced line takes 51 bytes: 4 byte frame header, 4 byte internal + header, 42 data bytes + checksum (to be confirmed) */ + if (raw) { + lines = cx->vbi.count * 2; + } else { + lines = cx->is_60hz ? 24 : 38; + if (cx->is_60hz) + lines += 2; + } + + cx->vbi.enc_size = lines * + (raw ? cx->vbi.raw_size : cx->vbi.sliced_size); + + data[0] = s->handle; + /* Lines per field */ + data[1] = (lines / 2) | ((lines / 2) << 16); + /* bytes per line */ + data[2] = (raw ? cx->vbi.raw_size : cx->vbi.sliced_size); + /* Every X number of frames a VBI interrupt arrives + (frames as in 25 or 30 fps) */ + data[3] = 1; + /* Setup VBI for the cx25840 digitizer */ + if (raw) { + data[4] = 0x20602060; + data[5] = 0x30703070; + } else { + data[4] = 0xB0F0B0F0; + data[5] = 0xA0E0A0E0; + } + + CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n", + data[0], data[1], data[2], data[3], data[4], data[5]); + + if (s->type == CX18_ENC_STREAM_TYPE_VBI) + cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data); +} + +int cx18_start_v4l2_encode_stream(struct cx18_stream *s) +{ + u32 data[MAX_MB_ARGUMENTS]; + struct cx18 *cx = s->cx; + struct list_head *p; + int ts = 0; + int captype = 0; + + if (s->v4l2dev == NULL && s->dvb.enabled == 0) + return -EINVAL; + + CX18_DEBUG_INFO("Start encoder stream %s\n", s->name); + + switch (s->type) { + case CX18_ENC_STREAM_TYPE_MPG: + captype = CAPTURE_CHANNEL_TYPE_MPEG; + cx->mpg_data_received = cx->vbi_data_inserted = 0; + cx->dualwatch_jiffies = jiffies; + cx->dualwatch_stereo_mode = cx->params.audio_properties & 0x300; + cx->search_pack_header = 0; + break; + + case CX18_ENC_STREAM_TYPE_TS: + captype = CAPTURE_CHANNEL_TYPE_TS; + ts = 1; + break; + case CX18_ENC_STREAM_TYPE_YUV: + captype = CAPTURE_CHANNEL_TYPE_YUV; + break; + case CX18_ENC_STREAM_TYPE_PCM: + captype = CAPTURE_CHANNEL_TYPE_PCM; + break; + case CX18_ENC_STREAM_TYPE_VBI: + captype = cx->vbi.sliced_in->service_set ? + CAPTURE_CHANNEL_TYPE_SLICED_VBI : CAPTURE_CHANNEL_TYPE_VBI; + cx->vbi.frame = 0; + cx->vbi.inserted_frame = 0; + memset(cx->vbi.sliced_mpeg_size, + 0, sizeof(cx->vbi.sliced_mpeg_size)); + break; + default: + return -EINVAL; + } + s->buffers_stolen = 0; + + /* mute/unmute video */ + cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, + s->handle, !!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)); + + /* Clear Streamoff flags in case left from last capture */ + clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); + + cx18_vapi_result(cx, data, CX18_CREATE_TASK, 1, CPU_CMD_MASK_CAPTURE); + s->handle = data[0]; + cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); + + if (atomic_read(&cx->ana_capturing) == 0 && !ts) { + /* Stuff from Windows, we don't know what it is */ + cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, s->handle, 12); + + cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3, + s->handle, cx->digitizer, cx->digitizer); + + /* Setup VBI */ + if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE) + cx18_vbi_setup(s); + + /* assign program index info. + Mask 7: select I/P/B, Num_req: 400 max */ + cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 1, 0); + + /* Setup API for Stream */ + cx2341x_update(cx, cx18_api_func, NULL, &cx->params); + } + + if (atomic_read(&cx->tot_capturing) == 0) { + clear_bit(CX18_F_I_EOS, &cx->i_flags); + write_reg(7, CX18_DSP0_INTERRUPT_MASK); + } + + cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); + + list_for_each(p, &s->q_free.list) { + struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); + + writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr); + writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length); + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); + } + /* begin_capture */ + if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { + CX18_DEBUG_WARN("Error starting capture!\n"); + cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); + return -EINVAL; + } + + /* you're live! sit back and await interrupts :) */ + if (!ts) + atomic_inc(&cx->ana_capturing); + atomic_inc(&cx->tot_capturing); + return 0; +} + +void cx18_stop_all_captures(struct cx18 *cx) +{ + int i; + + for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) { + struct cx18_stream *s = &cx->streams[i]; + + if (s->v4l2dev == NULL && s->dvb.enabled == 0) + continue; + if (test_bit(CX18_F_S_STREAMING, &s->s_flags)) + cx18_stop_v4l2_encode_stream(s, 0); + } +} + +int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) +{ + struct cx18 *cx = s->cx; + unsigned long then; + + if (s->v4l2dev == NULL && s->dvb.enabled == 0) + return -EINVAL; + + /* This function assumes that you are allowed to stop the capture + and that we are actually capturing */ + + CX18_DEBUG_INFO("Stop Capture\n"); + + if (atomic_read(&cx->tot_capturing) == 0) + return 0; + + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, !gop_end); + else + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); + + then = jiffies; + + if (s->type == CX18_ENC_STREAM_TYPE_MPG && gop_end) { + CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); + } + + if (s->type != CX18_ENC_STREAM_TYPE_TS) + atomic_dec(&cx->ana_capturing); + atomic_dec(&cx->tot_capturing); + + /* Clear capture and no-read bits */ + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + + cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); + s->handle = 0xffffffff; + + if (atomic_read(&cx->tot_capturing) > 0) + return 0; + + write_reg(5, CX18_DSP0_INTERRUPT_MASK); + wake_up(&s->waitq); + + return 0; +} + +u32 cx18_find_handle(struct cx18 *cx) +{ + int i; + + /* find first available handle to be used for global settings */ + for (i = 0; i < CX18_MAX_STREAMS; i++) { + struct cx18_stream *s = &cx->streams[i]; + + if (s->v4l2dev && s->handle) + return s->handle; + } + return 0; +} diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h new file mode 100644 index 00000000000..f327e947b24 --- /dev/null +++ b/drivers/media/video/cx18/cx18-streams.h @@ -0,0 +1,33 @@ +/* + * cx18 init/start/stop/exit stream functions + * + * Derived from ivtv-streams.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +u32 cx18_find_handle(struct cx18 *cx); +int cx18_streams_setup(struct cx18 *cx); +int cx18_streams_register(struct cx18 *cx); +void cx18_streams_cleanup(struct cx18 *cx, int unregister); + +/* Capture related */ +int cx18_start_v4l2_encode_stream(struct cx18_stream *s); +int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end); + +void cx18_stop_all_captures(struct cx18 *cx); diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c new file mode 100644 index 00000000000..22e76ee3f44 --- /dev/null +++ b/drivers/media/video/cx18/cx18-vbi.c @@ -0,0 +1,208 @@ +/* + * cx18 Vertical Blank Interval support functions + * + * Derived from ivtv-vbi.c + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-vbi.h" +#include "cx18-ioctl.h" +#include "cx18-queue.h" +#include "cx18-av-core.h" + +static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp) +{ + int line = 0; + int i; + u32 linemask[2] = { 0, 0 }; + unsigned short size; + static const u8 mpeg_hdr_data[] = { + 0x00, 0x00, 0x01, 0xba, 0x44, 0x00, 0x0c, 0x66, + 0x24, 0x01, 0x01, 0xd1, 0xd3, 0xfa, 0xff, 0xff, + 0x00, 0x00, 0x01, 0xbd, 0x00, 0x1a, 0x84, 0x80, + 0x07, 0x21, 0x00, 0x5d, 0x63, 0xa7, 0xff, 0xff + }; + const int sd = sizeof(mpeg_hdr_data); /* start of vbi data */ + int idx = cx->vbi.frame % CX18_VBI_FRAMES; + u8 *dst = &cx->vbi.sliced_mpeg_data[idx][0]; + + for (i = 0; i < lines; i++) { + struct v4l2_sliced_vbi_data *sdata = cx->vbi.sliced_data + i; + int f, l; + + if (sdata->id == 0) + continue; + + l = sdata->line - 6; + f = sdata->field; + if (f) + l += 18; + if (l < 32) + linemask[0] |= (1 << l); + else + linemask[1] |= (1 << (l - 32)); + dst[sd + 12 + line * 43] = cx18_service2vbi(sdata->id); + memcpy(dst + sd + 12 + line * 43 + 1, sdata->data, 42); + line++; + } + memcpy(dst, mpeg_hdr_data, sizeof(mpeg_hdr_data)); + if (line == 36) { + /* All lines are used, so there is no space for the linemask + (the max size of the VBI data is 36 * 43 + 4 bytes). + So in this case we use the magic number 'ITV0'. */ + memcpy(dst + sd, "ITV0", 4); + memcpy(dst + sd + 4, dst + sd + 12, line * 43); + size = 4 + ((43 * line + 3) & ~3); + } else { + memcpy(dst + sd, "cx0", 4); + memcpy(dst + sd + 4, &linemask[0], 8); + size = 12 + ((43 * line + 3) & ~3); + } + dst[4+16] = (size + 10) >> 8; + dst[5+16] = (size + 10) & 0xff; + dst[9+16] = 0x21 | ((pts_stamp >> 29) & 0x6); + dst[10+16] = (pts_stamp >> 22) & 0xff; + dst[11+16] = 1 | ((pts_stamp >> 14) & 0xff); + dst[12+16] = (pts_stamp >> 7) & 0xff; + dst[13+16] = 1 | ((pts_stamp & 0x7f) << 1); + cx->vbi.sliced_mpeg_size[idx] = sd + size; +} + +/* Compress raw VBI format, removes leading SAV codes and surplus space + after the field. + Returns new compressed size. */ +static u32 compress_raw_buf(struct cx18 *cx, u8 *buf, u32 size) +{ + u32 line_size = cx->vbi.raw_decoder_line_size; + u32 lines = cx->vbi.count; + u8 sav1 = cx->vbi.raw_decoder_sav_odd_field; + u8 sav2 = cx->vbi.raw_decoder_sav_even_field; + u8 *q = buf; + u8 *p; + int i; + + for (i = 0; i < lines; i++) { + p = buf + i * line_size; + + /* Look for SAV code */ + if (p[0] != 0xff || p[1] || p[2] || + (p[3] != sav1 && p[3] != sav2)) + break; + memcpy(q, p + 4, line_size - 4); + q += line_size - 4; + } + return lines * (line_size - 4); +} + + +/* Compressed VBI format, all found sliced blocks put next to one another + Returns new compressed size */ +static u32 compress_sliced_buf(struct cx18 *cx, u32 line, u8 *buf, + u32 size, u8 sav) +{ + u32 line_size = cx->vbi.sliced_decoder_line_size; + struct v4l2_decode_vbi_line vbi; + int i; + + /* find the first valid line */ + for (i = 0; i < size; i++, buf++) { + if (buf[0] == 0xff && !buf[1] && !buf[2] && buf[3] == sav) + break; + } + + size -= i; + if (size < line_size) + return line; + for (i = 0; i < size / line_size; i++) { + u8 *p = buf + i * line_size; + + /* Look for SAV code */ + if (p[0] != 0xff || p[1] || p[2] || p[3] != sav) + continue; + vbi.p = p + 4; + cx18_av_cmd(cx, VIDIOC_INT_DECODE_VBI_LINE, &vbi); + if (vbi.type) { + cx->vbi.sliced_data[line].id = vbi.type; + cx->vbi.sliced_data[line].field = vbi.is_second_field; + cx->vbi.sliced_data[line].line = vbi.line; + memcpy(cx->vbi.sliced_data[line].data, vbi.p, 42); + line++; + } + } + return line; +} + +void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf, + u64 pts_stamp, int streamtype) +{ + u8 *p = (u8 *) buf->buf; + u32 size = buf->bytesused; + int lines; + + if (streamtype != CX18_ENC_STREAM_TYPE_VBI) + return; + + /* Raw VBI data */ + if (cx->vbi.sliced_in->service_set == 0) { + u8 type; + + cx18_buf_swap(buf); + + type = p[3]; + + size = buf->bytesused = compress_raw_buf(cx, p, size); + + /* second field of the frame? */ + if (type == cx->vbi.raw_decoder_sav_even_field) { + /* Dirty hack needed for backwards + compatibility of old VBI software. */ + p += size - 4; + memcpy(p, &cx->vbi.frame, 4); + cx->vbi.frame++; + } + return; + } + + /* Sliced VBI data with data insertion */ + cx18_buf_swap(buf); + + /* first field */ + lines = compress_sliced_buf(cx, 0, p, size / 2, + cx->vbi.sliced_decoder_sav_odd_field); + /* second field */ + /* experimentation shows that the second half does not always + begin at the exact address. So start a bit earlier + (hence 32). */ + lines = compress_sliced_buf(cx, lines, p + size / 2 - 32, + size / 2 + 32, cx->vbi.sliced_decoder_sav_even_field); + /* always return at least one empty line */ + if (lines == 0) { + cx->vbi.sliced_data[0].id = 0; + cx->vbi.sliced_data[0].line = 0; + cx->vbi.sliced_data[0].field = 0; + lines = 1; + } + buf->bytesused = size = lines * sizeof(cx->vbi.sliced_data[0]); + memcpy(p, &cx->vbi.sliced_data[0], size); + + if (cx->vbi.insert_mpeg) + copy_vbi_data(cx, lines, pts_stamp); + cx->vbi.frame++; +} diff --git a/drivers/media/video/cx18/cx18-vbi.h b/drivers/media/video/cx18/cx18-vbi.h new file mode 100644 index 00000000000..c56ff7d28f2 --- /dev/null +++ b/drivers/media/video/cx18/cx18-vbi.h @@ -0,0 +1,26 @@ +/* + * cx18 Vertical Blank Interval support functions + * + * Derived from ivtv-vbi.h + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf, + u64 pts_stamp, int streamtype); +int cx18_used_line(struct cx18 *cx, int line, int field); diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h new file mode 100644 index 00000000000..d5c7a6f968d --- /dev/null +++ b/drivers/media/video/cx18/cx18-version.h @@ -0,0 +1,34 @@ +/* + * cx18 driver version information + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_VERSION_H +#define CX18_VERSION_H + +#define CX18_DRIVER_NAME "cx18" +#define CX18_DRIVER_VERSION_MAJOR 1 +#define CX18_DRIVER_VERSION_MINOR 0 +#define CX18_DRIVER_VERSION_PATCHLEVEL 0 + +#define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL) +#define CX18_DRIVER_VERSION KERNEL_VERSION(CX18_DRIVER_VERSION_MAJOR, \ + CX18_DRIVER_VERSION_MINOR, CX18_DRIVER_VERSION_PATCHLEVEL) + +#endif diff --git a/drivers/media/video/cx18/cx18-video.c b/drivers/media/video/cx18/cx18-video.c new file mode 100644 index 00000000000..2e5c4193933 --- /dev/null +++ b/drivers/media/video/cx18/cx18-video.c @@ -0,0 +1,45 @@ +/* + * cx18 video interface functions + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-video.h" +#include "cx18-av-core.h" +#include "cx18-cards.h" + +void cx18_video_set_io(struct cx18 *cx) +{ + struct v4l2_routing route; + int inp = cx->active_input; + u32 type; + + route.input = cx->card->video_inputs[inp].video_input; + route.output = 0; + cx18_av_cmd(cx, VIDIOC_INT_S_VIDEO_ROUTING, &route); + + type = cx->card->video_inputs[inp].video_type; + + if (type == CX18_CARD_INPUT_VID_TUNER) + route.input = 0; /* Tuner */ + else if (type < CX18_CARD_INPUT_COMPOSITE1) + route.input = 2; /* S-Video */ + else + route.input = 1; /* Composite */ +} diff --git a/drivers/media/video/cx18/cx18-video.h b/drivers/media/video/cx18/cx18-video.h new file mode 100644 index 00000000000..529006a06e5 --- /dev/null +++ b/drivers/media/video/cx18/cx18-video.h @@ -0,0 +1,22 @@ +/* + * cx18 video interface functions + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +void cx18_video_set_io(struct cx18 *cx); diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h new file mode 100644 index 00000000000..33f78da9dba --- /dev/null +++ b/drivers/media/video/cx18/cx23418.h @@ -0,0 +1,458 @@ +/* + * cx18 header containing common defines. + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX23418_H +#define CX23418_H + +#include <media/cx2341x.h> + +#define MGR_CMD_MASK 0x40000000 +/* The MSB of the command code indicates that this is the completion of a + command */ +#define MGR_CMD_MASK_ACK (MGR_CMD_MASK | 0x80000000) + +/* Description: This command creates a new instance of a certain task + IN[0] - Task ID. This is one of the XPU_CMD_MASK_YYY where XPU is + the processor on which the task YYY will be created + OUT[0] - Task handle. This handle is passed along with commands to + dispatch to the right instance of the task + ReturnCode - One of the ERR_SYS_... */ +#define CX18_CREATE_TASK (MGR_CMD_MASK | 0x0001) + +/* Description: This command destroys an instance of a task + IN[0] - Task handle. Hanlde of the task to destroy + ReturnCode - One of the ERR_SYS_... */ +#define CX18_DESTROY_TASK (MGR_CMD_MASK | 0x0002) + +/* All commands for CPU have the following mask set */ +#define CPU_CMD_MASK 0x20000000 +#define CPU_CMD_MASK_ACK (CPU_CMD_MASK | 0x80000000) +#define CPU_CMD_MASK_CAPTURE (CPU_CMD_MASK | 0x00020000) +#define CPU_CMD_MASK_TS (CPU_CMD_MASK | 0x00040000) + +#define EPU_CMD_MASK 0x02000000 +#define EPU_CMD_MASK_DEBUG (EPU_CMD_MASK | 0x000000) +#define EPU_CMD_MASK_DE (EPU_CMD_MASK | 0x040000) + +/* Description: This command indicates that a Memory Descriptor List has been + filled with the requested channel type + IN[0] - Task handle. Handle of the task + IN[1] - Offset of the MDL_ACK from the beginning of the local DDR. + IN[2] - Number of CNXT_MDL_ACK structures in the array pointed to by IN[1] + ReturnCode - One of the ERR_DE_... */ +#define CX18_EPU_DMA_DONE (EPU_CMD_MASK_DE | 0x0001) + +/* Something interesting happened + IN[0] - A value to log + IN[1] - An offset of a string in the MiniMe memory; + 0/zero/NULL means "I have nothing to say" */ +#define CX18_EPU_DEBUG (EPU_CMD_MASK_DEBUG | 0x0003) + +/* Description: This command starts streaming with the set channel type + IN[0] - Task handle. Handle of the task to start + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_START (CPU_CMD_MASK_CAPTURE | 0x0002) + +/* Description: This command stops streaming with the set channel type + IN[0] - Task handle. Handle of the task to stop + IN[1] - 0 = stop at end of GOP, 1 = stop at end of frame (MPEG only) + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_STOP (CPU_CMD_MASK_CAPTURE | 0x0003) + +/* Description: This command pauses streaming with the set channel type + IN[0] - Task handle. Handle of the task to pause + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_PAUSE (CPU_CMD_MASK_CAPTURE | 0x0007) + +/* Description: This command resumes streaming with the set channel type + IN[0] - Task handle. Handle of the task to resume + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_CAPTURE_RESUME (CPU_CMD_MASK_CAPTURE | 0x0008) + +#define CAPTURE_CHANNEL_TYPE_NONE 0 +#define CAPTURE_CHANNEL_TYPE_MPEG 1 +#define CAPTURE_CHANNEL_TYPE_INDEX 2 +#define CAPTURE_CHANNEL_TYPE_YUV 3 +#define CAPTURE_CHANNEL_TYPE_PCM 4 +#define CAPTURE_CHANNEL_TYPE_VBI 5 +#define CAPTURE_CHANNEL_TYPE_SLICED_VBI 6 +#define CAPTURE_CHANNEL_TYPE_TS 7 +#define CAPTURE_CHANNEL_TYPE_MAX 15 + +/* Description: This command sets the channel type. This can only be done + when stopped. + IN[0] - Task handle. Handle of the task to start + IN[1] - Channel Type. See Below. + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_CHANNEL_TYPE (CPU_CMD_MASK_CAPTURE + 1) + +/* Description: Set stream output type + IN[0] - task handle. Handle of the task to start + IN[1] - type + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_STREAM_OUTPUT_TYPE (CPU_CMD_MASK_CAPTURE | 0x0012) + +/* Description: Set video input resolution and frame rate + IN[0] - task handle + IN[1] - reserved + IN[2] - reserved + IN[3] - reserved + IN[4] - reserved + IN[5] - frame rate, 0 - 29.97f/s, 1 - 25f/s + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_IN (CPU_CMD_MASK_CAPTURE | 0x0004) + +/* Description: Set video frame rate + IN[0] - task handle. Handle of the task to start + IN[1] - video bit rate mode + IN[2] - video average rate + IN[3] - video peak rate + IN[4] - system mux rate + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_RATE (CPU_CMD_MASK_CAPTURE | 0x0005) + +/* Description: Set video output resolution + IN[0] - task handle + IN[1] - horizontal size + IN[2] - vertical size + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_RESOLUTION (CPU_CMD_MASK_CAPTURE | 0x0006) + +/* Description: This command set filter parameters + IN[0] - Task handle. Handle of the task + IN[1] - type, 0 - temporal, 1 - spatial, 2 - median + IN[2] - mode, temporal/spatial: 0 - disable, 1 - static, 2 - dynamic + median: 0 = disable, 1 = horizontal, 2 = vertical, + 3 = horizontal/vertical, 4 = diagonal + IN[3] - strength, temporal 0 - 31, spatial 0 - 15 + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_FILTER_PARAM (CPU_CMD_MASK_CAPTURE | 0x0009) + +/* Description: This command set spatial filter type + IN[0] - Task handle. + IN[1] - luma type: 0 = disable, 1 = 1D horizontal only, 2 = 1D vertical only, + 3 = 2D H/V separable, 4 = 2D symmetric non-separable + IN[2] - chroma type: 0 - diable, 1 = 1D horizontal + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_SPATIAL_FILTER_TYPE (CPU_CMD_MASK_CAPTURE | 0x000C) + +/* Description: This command set coring levels for median filter + IN[0] - Task handle. + IN[1] - luma_high + IN[2] - luma_low + IN[3] - chroma_high + IN[4] - chroma_low + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_MEDIAN_CORING (CPU_CMD_MASK_CAPTURE | 0x000E) + +/* Description: This command set the picture type mask for index file + IN[0] - 0 = disable index file output + 1 = output I picture + 2 = P picture + 4 = B picture + other = illegal */ +#define CX18_CPU_SET_INDEXTABLE (CPU_CMD_MASK_CAPTURE | 0x0010) + +/* Description: Set audio parameters + IN[0] - task handle. Handle of the task to start + IN[1] - audio parameter + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_AUDIO_PARAMETERS (CPU_CMD_MASK_CAPTURE | 0x0011) + +/* Description: Set video mute + IN[0] - task handle. Handle of the task to start + IN[1] - bit31-24: muteYvalue + bit23-16: muteUvalue + bit15-8: muteVvalue + bit0: 1:mute, 0: unmute + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_MUTE (CPU_CMD_MASK_CAPTURE | 0x0013) + +/* Description: Set audio mute + IN[0] - task handle. Handle of the task to start + IN[1] - mute/unmute + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_AUDIO_MUTE (CPU_CMD_MASK_CAPTURE | 0x0014) + +/* Description: Set stream output type + IN[0] - task handle. Handle of the task to start + IN[1] - subType + SET_INITIAL_SCR 1 + SET_QUALITY_MODE 2 + SET_VIM_PROTECT_MODE 3 + SET_PTS_CORRECTION 4 + SET_USB_FLUSH_MODE 5 + SET_MERAQPAR_ENABLE 6 + SET_NAV_PACK_INSERTION 7 + SET_SCENE_CHANGE_ENABLE 8 + IN[2] - parameter 1 + IN[3] - parameter 2 + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_MISC_PARAMETERS (CPU_CMD_MASK_CAPTURE | 0x0015) + +/* Description: Set raw VBI parameters + IN[0] - Task handle + IN[1] - No. of input lines per field: + bit[15:0]: field 1, + bit[31:16]: field 2 + IN[2] - No. of input bytes per line + IN[3] - No. of output frames per transfer + IN[4] - start code + IN[5] - stop code + ReturnCode */ +#define CX18_CPU_SET_RAW_VBI_PARAM (CPU_CMD_MASK_CAPTURE | 0x0016) + +/* Description: Set capture line No. + IN[0] - task handle. Handle of the task to start + IN[1] - height1 + IN[2] - height2 + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_CAPTURE_LINE_NO (CPU_CMD_MASK_CAPTURE | 0x0017) + +/* Description: Set copyright + IN[0] - task handle. Handle of the task to start + IN[1] - copyright + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_COPYRIGHT (CPU_CMD_MASK_CAPTURE | 0x0018) + +/* Description: Set audio PID + IN[0] - task handle. Handle of the task to start + IN[1] - PID + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_AUDIO_PID (CPU_CMD_MASK_CAPTURE | 0x0019) + +/* Description: Set video PID + IN[0] - task handle. Handle of the task to start + IN[1] - PID + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VIDEO_PID (CPU_CMD_MASK_CAPTURE | 0x001A) + +/* Description: Set Vertical Crop Line + IN[0] - task handle. Handle of the task to start + IN[1] - Line + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_VER_CROP_LINE (CPU_CMD_MASK_CAPTURE | 0x001B) + +/* Description: Set COP structure + IN[0] - task handle. Handle of the task to start + IN[1] - M + IN[2] - N + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_GOP_STRUCTURE (CPU_CMD_MASK_CAPTURE | 0x001C) + +/* Description: Set Scene Change Detection + IN[0] - task handle. Handle of the task to start + IN[1] - scene change + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_SCENE_CHANGE_DETECTION (CPU_CMD_MASK_CAPTURE | 0x001D) + +/* Description: Set Aspect Ratio + IN[0] - task handle. Handle of the task to start + IN[1] - AspectRatio + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_ASPECT_RATIO (CPU_CMD_MASK_CAPTURE | 0x001E) + +/* Description: Set Skip Input Frame + IN[0] - task handle. Handle of the task to start + IN[1] - skip input frames + ReturnCode - One of the ERR_CAPTURE_... */ +#define CX18_CPU_SET_SKIP_INPUT_FRAME (CPU_CMD_MASK_CAPTURE | 0x001F) + +/* Description: Set sliced VBI parameters - + Note This API will only apply to MPEG and Sliced VBI Channels + IN[0] - Task handle + IN[1] - output type, 0 - CC, 1 - Moji, 2 - Teletext + IN[2] - start / stop line + bit[15:0] start line number + bit[31:16] stop line number + IN[3] - number of output frames per interrupt + IN[4] - VBI insertion mode + bit 0: output user data, 1 - enable + bit 1: output private stream, 1 - enable + bit 2: mux option, 0 - in GOP, 1 - in picture + bit[7:0] private stream ID + IN[5] - insertion period while mux option is in picture + ReturnCode - VBI data offset */ +#define CX18_CPU_SET_SLICED_VBI_PARAM (CPU_CMD_MASK_CAPTURE | 0x0020) + +/* Description: Set the user data place holder + IN[0] - type of data (0 for user) + IN[1] - Stuffing period + IN[2] - ID data size in word (less than 10) + IN[3] - Pointer to ID buffer */ +#define CX18_CPU_SET_USERDATA_PLACE_HOLDER (CPU_CMD_MASK_CAPTURE | 0x0021) + + +/* Description: + In[0] Task Handle + return parameter: + Out[0] Reserved + Out[1] Video PTS bit[32:2] of last output video frame. + Out[2] Video PTS bit[ 1:0] of last output video frame. + Out[3] Hardware Video PTS counter bit[31:0], + these bits get incremented on every 90kHz clock tick. + Out[4] Hardware Video PTS counter bit32, + these bits get incremented on every 90kHz clock tick. + ReturnCode */ +#define CX18_CPU_GET_ENC_PTS (CPU_CMD_MASK_CAPTURE | 0x0022) + +/* Below is the list of commands related to the data exchange */ +#define CPU_CMD_MASK_DE (CPU_CMD_MASK | 0x040000) + +/* Description: This command provides the physical base address of the local + DDR as viewed by EPU + IN[0] - Physical offset where EPU has the local DDR mapped + ReturnCode - One of the ERR_DE_... */ +#define CPU_CMD_DE_SetBase (CPU_CMD_MASK_DE | 0x0001) + +/* Description: This command provides the offsets in the device memory where + the 2 cx18_mdl_ack blocks reside + IN[0] - Task handle. Handle of the task to start + IN[1] - Offset of the first cx18_mdl_ack from the beginning of the + local DDR. + IN[2] - Offset of the second cx18_mdl_ack from the beginning of the + local DDR. + ReturnCode - One of the ERR_DE_... */ +#define CX18_CPU_DE_SET_MDL_ACK (CPU_CMD_MASK_DE | 0x0002) + +/* Description: This command provides the offset to a Memory Descriptor List + IN[0] - Task handle. Handle of the task to start + IN[1] - Offset of the MDL from the beginning of the local DDR. + IN[2] - Number of cx18_mdl structures in the array pointed to by IN[1] + IN[3] - Buffer ID + IN[4] - Total buffer length + ReturnCode - One of the ERR_DE_... */ +#define CX18_CPU_DE_SET_MDL (CPU_CMD_MASK_DE | 0x0005) + +/* Description: This command requests return of all current Memory + Descriptor Lists to the driver + IN[0] - Task handle. Handle of the task to start + ReturnCode - One of the ERR_DE_... */ +/* #define CX18_CPU_DE_ReleaseMDL (CPU_CMD_MASK_DE | 0x0006) */ + +/* Description: This command signals the cpu that the dat buffer has been + consumed and ready for re-use. + IN[0] - Task handle. Handle of the task + IN[1] - Offset of the data block from the beginning of the local DDR. + IN[2] - Number of bytes in the data block + ReturnCode - One of the ERR_DE_... */ +/* #define CX18_CPU_DE_RELEASE_BUFFER (CPU_CMD_MASK_DE | 0x0007) */ + +/* No Error / Success */ +#define CNXT_OK 0x000000 + +/* Received unknown command */ +#define CXERR_UNK_CMD 0x000001 + +/* First parameter in the command is invalid */ +#define CXERR_INVALID_PARAM1 0x000002 + +/* Second parameter in the command is invalid */ +#define CXERR_INVALID_PARAM2 0x000003 + +/* Device interface is not open/found */ +#define CXERR_DEV_NOT_FOUND 0x000004 + +/* Requested function is not implemented/available */ +#define CXERR_NOTSUPPORTED 0x000005 + +/* Invalid pointer is provided */ +#define CXERR_BADPTR 0x000006 + +/* Unable to allocate memory */ +#define CXERR_NOMEM 0x000007 + +/* Object/Link not found */ +#define CXERR_LINK 0x000008 + +/* Device busy, command cannot be executed */ +#define CXERR_BUSY 0x000009 + +/* File/device/handle is not open. */ +#define CXERR_NOT_OPEN 0x00000A + +/* Value is out of range */ +#define CXERR_OUTOFRANGE 0x00000B + +/* Buffer overflow */ +#define CXERR_OVERFLOW 0x00000C + +/* Version mismatch */ +#define CXERR_BADVER 0x00000D + +/* Operation timed out */ +#define CXERR_TIMEOUT 0x00000E + +/* Operation aborted */ +#define CXERR_ABORT 0x00000F + +/* Specified I2C device not found for read/write */ +#define CXERR_I2CDEV_NOTFOUND 0x000010 + +/* Error in I2C data xfer (but I2C device is present) */ +#define CXERR_I2CDEV_XFERERR 0x000011 + +/* Chanel changing component not ready */ +#define CXERR_CHANNELNOTREADY 0x000012 + +/* PPU (Presensation/Decoder) mail box is corrupted */ +#define CXERR_PPU_MB_CORRUPT 0x000013 + +/* CPU (Capture/Encoder) mail box is corrupted */ +#define CXERR_CPU_MB_CORRUPT 0x000014 + +/* APU (Audio) mail box is corrupted */ +#define CXERR_APU_MB_CORRUPT 0x000015 + +/* Unable to open file for reading */ +#define CXERR_FILE_OPEN_READ 0x000016 + +/* Unable to open file for writing */ +#define CXERR_FILE_OPEN_WRITE 0x000017 + +/* Unable to find the I2C section specified */ +#define CXERR_I2C_BADSECTION 0x000018 + +/* Error in I2C data xfer (but I2C device is present) */ +#define CXERR_I2CDEV_DATALOW 0x000019 + +/* Error in I2C data xfer (but I2C device is present) */ +#define CXERR_I2CDEV_CLOCKLOW 0x00001A + +/* No Interrupt received from HW (for I2C access) */ +#define CXERR_NO_HW_I2C_INTR 0x00001B + +/* RPU is not ready to accept commands! */ +#define CXERR_RPU_NOT_READY 0x00001C + +/* RPU is not ready to accept commands! */ +#define CXERR_RPU_NO_ACK 0x00001D + +/* The are no buffers ready. Try again soon! */ +#define CXERR_NODATA_AGAIN 0x00001E + +/* The stream is stopping. Function not alllowed now! */ +#define CXERR_STOPPING_STATUS 0x00001F + +/* Trying to access hardware when the power is turned OFF */ +#define CXERR_DEVPOWER_OFF 0x000020 + +#endif /* CX23418_H */ diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 1fd326fe411..7bf14c9a15c 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -1,6 +1,7 @@ config VIDEO_CX23885 tristate "Conexant cx23885 (2388x successor) support" depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT + depends on HOTPLUG # due to FW_LOADER select I2C_ALGOBIT select FW_LOADER select VIDEO_BTCX @@ -8,14 +9,17 @@ config VIDEO_CX23885 select VIDEO_TVEEPROM select VIDEO_IR select VIDEOBUF_DVB - select DVB_TUNER_MT2131 if !DVB_FE_CUSTOMISE + select VIDEO_CX25840 + select VIDEO_CX2341X + select DVB_DIB7000P if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_PLL if !DVB_FE_CUSTOMISE - select TUNER_XC2028 if !DVB_FE_CUSTOMIZE - select TUNER_TDA8290 if !DVB_FE_CUSTOMIZE - select DVB_TDA18271 if !DVB_FE_CUSTOMIZE - select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE + select DVB_TDA10048 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile index 32c90be5060..29c23b44c13 100644 --- a/drivers/media/video/cx23885/Makefile +++ b/drivers/media/video/cx23885/Makefile @@ -1,8 +1,9 @@ -cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o +cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o obj-$(CONFIG_VIDEO_CX23885) += cx23885.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c new file mode 100644 index 00000000000..acdd3b6b3e7 --- /dev/null +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -0,0 +1,1764 @@ +/* + * + * Support for a cx23417 mpeg encoder via cx23885 host port. + * + * (c) 2004 Jelle Foks <jelle@foks.8m.com> + * (c) 2004 Gerd Knorr <kraxel@bytesex.org> + * (c) 2008 Steven Toth <stoth@hauppauge.com> + * - CX23885/7/8 support + * + * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <media/v4l2-common.h> +#include <media/cx2341x.h> + +#include "cx23885.h" +#include "media/cx2341x.h" + +#define CX23885_FIRM_IMAGE_SIZE 376836 +#define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw" + +static unsigned int mpegbufs = 32; +module_param(mpegbufs, int, 0644); +MODULE_PARM_DESC(mpegbufs, "number of mpeg buffers, range 2-32"); +static unsigned int mpeglines = 32; +module_param(mpeglines, int, 0644); +MODULE_PARM_DESC(mpeglines, "number of lines in an MPEG buffer, range 2-32"); +static unsigned int mpeglinesize = 512; +module_param(mpeglinesize, int, 0644); +MODULE_PARM_DESC(mpeglinesize, + "number of bytes in each line of an MPEG buffer, range 512-1024"); + +static unsigned int v4l_debug; +module_param(v4l_debug, int, 0644); +MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); + +#define dprintk(level, fmt, arg...)\ + do { if (v4l_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\ + } while (0) + +static struct cx23885_tvnorm cx23885_tvnorms[] = { + { + .name = "NTSC-M", + .id = V4L2_STD_NTSC_M, + }, { + .name = "NTSC-JP", + .id = V4L2_STD_NTSC_M_JP, + }, { + .name = "PAL-BG", + .id = V4L2_STD_PAL_BG, + }, { + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + }, { + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + }, { + .name = "PAL-N", + .id = V4L2_STD_PAL_N, + }, { + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + }, { + .name = "PAL-60", + .id = V4L2_STD_PAL_60, + }, { + .name = "SECAM-L", + .id = V4L2_STD_SECAM_L, + }, { + .name = "SECAM-DK", + .id = V4L2_STD_SECAM_DK, + } +}; + +/* ------------------------------------------------------------------ */ +enum cx23885_capture_type { + CX23885_MPEG_CAPTURE, + CX23885_RAW_CAPTURE, + CX23885_RAW_PASSTHRU_CAPTURE +}; +enum cx23885_capture_bits { + CX23885_RAW_BITS_NONE = 0x00, + CX23885_RAW_BITS_YUV_CAPTURE = 0x01, + CX23885_RAW_BITS_PCM_CAPTURE = 0x02, + CX23885_RAW_BITS_VBI_CAPTURE = 0x04, + CX23885_RAW_BITS_PASSTHRU_CAPTURE = 0x08, + CX23885_RAW_BITS_TO_HOST_CAPTURE = 0x10 +}; +enum cx23885_capture_end { + CX23885_END_AT_GOP, /* stop at the end of gop, generate irq */ + CX23885_END_NOW, /* stop immediately, no irq */ +}; +enum cx23885_framerate { + CX23885_FRAMERATE_NTSC_30, /* NTSC: 30fps */ + CX23885_FRAMERATE_PAL_25 /* PAL: 25fps */ +}; +enum cx23885_stream_port { + CX23885_OUTPUT_PORT_MEMORY, + CX23885_OUTPUT_PORT_STREAMING, + CX23885_OUTPUT_PORT_SERIAL +}; +enum cx23885_data_xfer_status { + CX23885_MORE_BUFFERS_FOLLOW, + CX23885_LAST_BUFFER, +}; +enum cx23885_picture_mask { + CX23885_PICTURE_MASK_NONE, + CX23885_PICTURE_MASK_I_FRAMES, + CX23885_PICTURE_MASK_I_P_FRAMES = 0x3, + CX23885_PICTURE_MASK_ALL_FRAMES = 0x7, +}; +enum cx23885_vbi_mode_bits { + CX23885_VBI_BITS_SLICED, + CX23885_VBI_BITS_RAW, +}; +enum cx23885_vbi_insertion_bits { + CX23885_VBI_BITS_INSERT_IN_XTENSION_USR_DATA, + CX23885_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM = 0x2 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1, +}; +enum cx23885_dma_unit { + CX23885_DMA_BYTES, + CX23885_DMA_FRAMES, +}; +enum cx23885_dma_transfer_status_bits { + CX23885_DMA_TRANSFER_BITS_DONE = 0x01, + CX23885_DMA_TRANSFER_BITS_ERROR = 0x04, + CX23885_DMA_TRANSFER_BITS_LL_ERROR = 0x10, +}; +enum cx23885_pause { + CX23885_PAUSE_ENCODING, + CX23885_RESUME_ENCODING, +}; +enum cx23885_copyright { + CX23885_COPYRIGHT_OFF, + CX23885_COPYRIGHT_ON, +}; +enum cx23885_notification_type { + CX23885_NOTIFICATION_REFRESH, +}; +enum cx23885_notification_status { + CX23885_NOTIFICATION_OFF, + CX23885_NOTIFICATION_ON, +}; +enum cx23885_notification_mailbox { + CX23885_NOTIFICATION_NO_MAILBOX = -1, +}; +enum cx23885_field1_lines { + CX23885_FIELD1_SAA7114 = 0x00EF, /* 239 */ + CX23885_FIELD1_SAA7115 = 0x00F0, /* 240 */ + CX23885_FIELD1_MICRONAS = 0x0105, /* 261 */ +}; +enum cx23885_field2_lines { + CX23885_FIELD2_SAA7114 = 0x00EF, /* 239 */ + CX23885_FIELD2_SAA7115 = 0x00F0, /* 240 */ + CX23885_FIELD2_MICRONAS = 0x0106, /* 262 */ +}; +enum cx23885_custom_data_type { + CX23885_CUSTOM_EXTENSION_USR_DATA, + CX23885_CUSTOM_PRIVATE_PACKET, +}; +enum cx23885_mute { + CX23885_UNMUTE, + CX23885_MUTE, +}; +enum cx23885_mute_video_mask { + CX23885_MUTE_VIDEO_V_MASK = 0x0000FF00, + CX23885_MUTE_VIDEO_U_MASK = 0x00FF0000, + CX23885_MUTE_VIDEO_Y_MASK = 0xFF000000, +}; +enum cx23885_mute_video_shift { + CX23885_MUTE_VIDEO_V_SHIFT = 8, + CX23885_MUTE_VIDEO_U_SHIFT = 16, + CX23885_MUTE_VIDEO_Y_SHIFT = 24, +}; + +/* defines below are from ivtv-driver.h */ +#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF + +/* Firmware API commands */ +#define IVTV_API_STD_TIMEOUT 500 + +/* Registers */ +/* IVTV_REG_OFFSET */ +#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8) +#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC) +#define IVTV_REG_SPU (0x9050) +#define IVTV_REG_HW_BLOCKS (0x9054) +#define IVTV_REG_VPU (0x9058) +#define IVTV_REG_APU (0xA064) + +/**** Bit definitions for MC417_RWD and MC417_OEN registers *** + bits 31-16 ++-----------+ +| Reserved | ++-----------+ + bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| MIWR# | MIRD# | MICS# |MIRDY# |MIADDR3|MIADDR2|MIADDR1|MIADDR0| ++-------+-------+-------+-------+-------+-------+-------+-------+ + bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 ++-------+-------+-------+-------+-------+-------+-------+-------+ +|MIDATA7|MIDATA6|MIDATA5|MIDATA4|MIDATA3|MIDATA2|MIDATA1|MIDATA0| ++-------+-------+-------+-------+-------+-------+-------+-------+ +***/ +#define MC417_MIWR 0x8000 +#define MC417_MIRD 0x4000 +#define MC417_MICS 0x2000 +#define MC417_MIRDY 0x1000 +#define MC417_MIADDR 0x0F00 +#define MC417_MIDATA 0x00FF + +/* MIADDR* nibble definitions */ +#define MCI_MEMORY_DATA_BYTE0 0x000 +#define MCI_MEMORY_DATA_BYTE1 0x100 +#define MCI_MEMORY_DATA_BYTE2 0x200 +#define MCI_MEMORY_DATA_BYTE3 0x300 +#define MCI_MEMORY_ADDRESS_BYTE2 0x400 +#define MCI_MEMORY_ADDRESS_BYTE1 0x500 +#define MCI_MEMORY_ADDRESS_BYTE0 0x600 +#define MCI_REGISTER_DATA_BYTE0 0x800 +#define MCI_REGISTER_DATA_BYTE1 0x900 +#define MCI_REGISTER_DATA_BYTE2 0xA00 +#define MCI_REGISTER_DATA_BYTE3 0xB00 +#define MCI_REGISTER_ADDRESS_BYTE0 0xC00 +#define MCI_REGISTER_ADDRESS_BYTE1 0xD00 +#define MCI_REGISTER_MODE 0xE00 + +/* Read and write modes */ +#define MCI_MODE_REGISTER_READ 0 +#define MCI_MODE_REGISTER_WRITE 1 +#define MCI_MODE_MEMORY_READ 0 +#define MCI_MODE_MEMORY_WRITE 0x40 + +/*** Bit definitions for MC417_CTL register **** + bits 31-6 bits 5-4 bit 3 bits 2-1 Bit 0 ++--------+-------------+--------+--------------+------------+ +|Reserved|MC417_SPD_CTL|Reserved|MC417_GPIO_SEL|UART_GPIO_EN| ++--------+-------------+--------+--------------+------------+ +***/ +#define MC417_SPD_CTL(x) (((x) << 4) & 0x00000030) +#define MC417_GPIO_SEL(x) (((x) << 1) & 0x00000006) +#define MC417_UART_GPIO_EN 0x00000001 + +/* Values for speed control */ +#define MC417_SPD_CTL_SLOW 0x1 +#define MC417_SPD_CTL_MEDIUM 0x0 +#define MC417_SPD_CTL_FAST 0x3 /* b'1x, but we use b'11 */ + +/* Values for GPIO select */ +#define MC417_GPIO_SEL_GPIO3 0x3 +#define MC417_GPIO_SEL_GPIO2 0x2 +#define MC417_GPIO_SEL_GPIO1 0x1 +#define MC417_GPIO_SEL_GPIO0 0x0 + +void cx23885_mc417_init(struct cx23885_dev *dev) +{ + u32 regval; + + dprintk(2, "%s()\n", __func__); + + /* Configure MC417_CTL register to defaults. */ + regval = MC417_SPD_CTL(MC417_SPD_CTL_FAST) | + MC417_GPIO_SEL(MC417_GPIO_SEL_GPIO3) | + MC417_UART_GPIO_EN; + cx_write(MC417_CTL, regval); + + /* Configure MC417_OEN to defaults. */ + regval = MC417_MIRDY; + cx_write(MC417_OEN, regval); + + /* Configure MC417_RWD to defaults. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS; + cx_write(MC417_RWD, regval); +} + +static int mc417_wait_ready(struct cx23885_dev *dev) +{ + u32 mi_ready; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + + for (;;) { + mi_ready = cx_read(MC417_RWD) & MC417_MIRDY; + if (mi_ready != 0) + return 0; + if (time_after(jiffies, timeout)) + return -1; + udelay(1); + } +} + +static int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value) +{ + u32 regval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0 | + (value & 0x000000FF); + cx_write(MC417_RWD, regval); + + /* Transition CS/WR to effect write transaction across bus. */ + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1 | + ((value >> 8) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2 | + ((value >> 16) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3 | + ((value >> 24) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Indicate that this is a write. */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | + MCI_MODE_REGISTER_WRITE; + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + return mc417_wait_ready(dev); +} + +static int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value) +{ + int retval; + u32 regval; + u32 tempval; + u32 dataval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | + ((address & 0x00FF)); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Indicate that this is a register read. */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | + MCI_MODE_REGISTER_READ; + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + retval = mc417_wait_ready(dev); + + /* switch the DAT0-7 GPIO[10:3] to input mode */ + cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); + + /* Read data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; + cx_write(MC417_RWD, regval); + + /* Transition RD to effect read transaction across bus. + * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? + * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its + * input only...) + */ + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; + cx_write(MC417_RWD, regval); + + /* Collect byte */ + tempval = cx_read(MC417_RWD); + dataval = tempval & 0x000000FF; + + /* Bring CS and RD high. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 8); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 16); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 24); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + *value = dataval; + + return retval; +} + +int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value) +{ + u32 regval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0 | + (value & 0x000000FF); + cx_write(MC417_RWD, regval); + + /* Transition CS/WR to effect write transaction across bus. */ + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1 | + ((value >> 8) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2 | + ((value >> 16) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3 | + ((value >> 24) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | + MCI_MODE_MEMORY_WRITE | ((address >> 16) & 0x3F); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + return mc417_wait_ready(dev); +} + +int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value) +{ + int retval; + u32 regval; + u32 tempval; + u32 dataval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write address byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | + MCI_MODE_MEMORY_READ | ((address >> 16) & 0x3F); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + retval = mc417_wait_ready(dev); + + /* switch the DAT0-7 GPIO[10:3] to input mode */ + cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); + + /* Read data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; + cx_write(MC417_RWD, regval); + + /* Transition RD to effect read transaction across bus. */ + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; + cx_write(MC417_RWD, regval); + + /* Collect byte */ + tempval = cx_read(MC417_RWD); + dataval = ((tempval & 0x000000FF) << 24); + + /* Bring CS and RD high. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 16); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 8); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= (tempval & 0x000000FF); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + *value = dataval; + + return retval; +} + +/* ------------------------------------------------------------------ */ + +/* MPEG encoder API */ +char *cmd_to_str(int cmd) +{ + switch (cmd) { + case CX2341X_ENC_PING_FW: + return "PING_FW"; + case CX2341X_ENC_START_CAPTURE: + return "START_CAPTURE"; + case CX2341X_ENC_STOP_CAPTURE: + return "STOP_CAPTURE"; + case CX2341X_ENC_SET_AUDIO_ID: + return "SET_AUDIO_ID"; + case CX2341X_ENC_SET_VIDEO_ID: + return "SET_VIDEO_ID"; + case CX2341X_ENC_SET_PCR_ID: + return "SET_PCR_PID"; + case CX2341X_ENC_SET_FRAME_RATE: + return "SET_FRAME_RATE"; + case CX2341X_ENC_SET_FRAME_SIZE: + return "SET_FRAME_SIZE"; + case CX2341X_ENC_SET_BIT_RATE: + return "SET_BIT_RATE"; + case CX2341X_ENC_SET_GOP_PROPERTIES: + return "SET_GOP_PROPERTIES"; + case CX2341X_ENC_SET_ASPECT_RATIO: + return "SET_ASPECT_RATIO"; + case CX2341X_ENC_SET_DNR_FILTER_MODE: + return "SET_DNR_FILTER_PROPS"; + case CX2341X_ENC_SET_DNR_FILTER_PROPS: + return "SET_DNR_FILTER_PROPS"; + case CX2341X_ENC_SET_CORING_LEVELS: + return "SET_CORING_LEVELS"; + case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE: + return "SET_SPATIAL_FILTER_TYPE"; + case CX2341X_ENC_SET_VBI_LINE: + return "SET_VBI_LINE"; + case CX2341X_ENC_SET_STREAM_TYPE: + return "SET_STREAM_TYPE"; + case CX2341X_ENC_SET_OUTPUT_PORT: + return "SET_OUTPUT_PORT"; + case CX2341X_ENC_SET_AUDIO_PROPERTIES: + return "SET_AUDIO_PROPERTIES"; + case CX2341X_ENC_HALT_FW: + return "HALT_FW"; + case CX2341X_ENC_GET_VERSION: + return "GET_VERSION"; + case CX2341X_ENC_SET_GOP_CLOSURE: + return "SET_GOP_CLOSURE"; + case CX2341X_ENC_GET_SEQ_END: + return "GET_SEQ_END"; + case CX2341X_ENC_SET_PGM_INDEX_INFO: + return "SET_PGM_INDEX_INFO"; + case CX2341X_ENC_SET_VBI_CONFIG: + return "SET_VBI_CONFIG"; + case CX2341X_ENC_SET_DMA_BLOCK_SIZE: + return "SET_DMA_BLOCK_SIZE"; + case CX2341X_ENC_GET_PREV_DMA_INFO_MB_10: + return "GET_PREV_DMA_INFO_MB_10"; + case CX2341X_ENC_GET_PREV_DMA_INFO_MB_9: + return "GET_PREV_DMA_INFO_MB_9"; + case CX2341X_ENC_SCHED_DMA_TO_HOST: + return "SCHED_DMA_TO_HOST"; + case CX2341X_ENC_INITIALIZE_INPUT: + return "INITIALIZE_INPUT"; + case CX2341X_ENC_SET_FRAME_DROP_RATE: + return "SET_FRAME_DROP_RATE"; + case CX2341X_ENC_PAUSE_ENCODER: + return "PAUSE_ENCODER"; + case CX2341X_ENC_REFRESH_INPUT: + return "REFRESH_INPUT"; + case CX2341X_ENC_SET_COPYRIGHT: + return "SET_COPYRIGHT"; + case CX2341X_ENC_SET_EVENT_NOTIFICATION: + return "SET_EVENT_NOTIFICATION"; + case CX2341X_ENC_SET_NUM_VSYNC_LINES: + return "SET_NUM_VSYNC_LINES"; + case CX2341X_ENC_SET_PLACEHOLDER: + return "SET_PLACEHOLDER"; + case CX2341X_ENC_MUTE_VIDEO: + return "MUTE_VIDEO"; + case CX2341X_ENC_MUTE_AUDIO: + return "MUTE_AUDIO"; + case CX2341X_ENC_MISC: + return "MISC"; + default: + return "UNKNOWN"; + } +} + +static int cx23885_mbox_func(void *priv, + u32 command, + int in, + int out, + u32 data[CX2341X_MBOX_MAX_DATA]) +{ + struct cx23885_dev *dev = priv; + unsigned long timeout; + u32 value, flag, retval = 0; + int i; + + dprintk(3, "%s: command(0x%X) = %s\n", __func__, command, + cmd_to_str(command)); + + /* this may not be 100% safe if we can't read any memory location + without side effects */ + mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value); + if (value != 0x12345678) { + printk(KERN_ERR + "Firmware and/or mailbox pointer not initialized " + "or corrupted, signature = 0x%x, cmd = %s\n", value, + cmd_to_str(command)); + return -1; + } + + /* This read looks at 32 bits, but flag is only 8 bits. + * Seems we also bail if CMD or TIMEOUT bytes are set??? + */ + mc417_memory_read(dev, dev->cx23417_mailbox, &flag); + if (flag) { + printk(KERN_ERR "ERROR: Mailbox appears to be in use " + "(%x), cmd = %s\n", flag, cmd_to_str(command)); + return -1; + } + + flag |= 1; /* tell 'em we're working on it */ + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + /* write command + args + fill remaining with zeros */ + /* command code */ + mc417_memory_write(dev, dev->cx23417_mailbox + 1, command); + mc417_memory_write(dev, dev->cx23417_mailbox + 3, + IVTV_API_STD_TIMEOUT); /* timeout */ + for (i = 0; i < in; i++) { + mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, data[i]); + dprintk(3, "API Input %d = %d\n", i, data[i]); + } + for (; i < CX2341X_MBOX_MAX_DATA; i++) + mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, 0); + + flag |= 3; /* tell 'em we're done writing */ + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + /* wait for firmware to handle the API command */ + timeout = jiffies + msecs_to_jiffies(10); + for (;;) { + mc417_memory_read(dev, dev->cx23417_mailbox, &flag); + if (0 != (flag & 4)) + break; + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "ERROR: API Mailbox timeout\n"); + return -1; + } + udelay(10); + } + + /* read output values */ + for (i = 0; i < out; i++) { + mc417_memory_read(dev, dev->cx23417_mailbox + 4 + i, data + i); + dprintk(3, "API Output %d = %d\n", i, data[i]); + } + + mc417_memory_read(dev, dev->cx23417_mailbox + 2, &retval); + dprintk(3, "API result = %d\n", retval); + + flag = 0; + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + return retval; +} + +/* We don't need to call the API often, so using just one + * mailbox will probably suffice + */ +static int cx23885_api_cmd(struct cx23885_dev *dev, + u32 command, + u32 inputcnt, + u32 outputcnt, + ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i, err; + + dprintk(3, "%s() cmds = 0x%08x\n", __func__, command); + + va_start(vargs, outputcnt); + for (i = 0; i < inputcnt; i++) + data[i] = va_arg(vargs, int); + + err = cx23885_mbox_func(dev, command, inputcnt, outputcnt, data); + for (i = 0; i < outputcnt; i++) { + int *vptr = va_arg(vargs, int *); + *vptr = data[i]; + } + va_end(vargs); + + return err; +} + +static int cx23885_find_mailbox(struct cx23885_dev *dev) +{ + u32 signature[4] = { + 0x12345678, 0x34567812, 0x56781234, 0x78123456 + }; + int signaturecnt = 0; + u32 value; + int i; + + dprintk(2, "%s()\n", __func__); + + for (i = 0; i < CX23885_FIRM_IMAGE_SIZE; i++) { + mc417_memory_read(dev, i, &value); + if (value == signature[signaturecnt]) + signaturecnt++; + else + signaturecnt = 0; + if (4 == signaturecnt) { + dprintk(1, "Mailbox signature found at 0x%x\n", i+1); + return i+1; + } + } + printk(KERN_ERR "Mailbox signature values not found!\n"); + return -1; +} + +static int cx23885_load_firmware(struct cx23885_dev *dev) +{ + static const unsigned char magic[8] = { + 0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa + }; + const struct firmware *firmware; + int i, retval = 0; + u32 value = 0; + u32 gpio_output = 0; + u32 checksum = 0; + u32 *dataptr; + + dprintk(2, "%s()\n", __func__); + + /* Save GPIO settings before reset of APU */ + retval |= mc417_memory_read(dev, 0x9020, &gpio_output); + retval |= mc417_memory_read(dev, 0x900C, &value); + + retval = mc417_register_write(dev, + IVTV_REG_VPU, 0xFFFFFFED); + retval |= mc417_register_write(dev, + IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); + retval |= mc417_register_write(dev, + IVTV_REG_ENC_SDRAM_REFRESH, 0x80000800); + retval |= mc417_register_write(dev, + IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); + retval |= mc417_register_write(dev, + IVTV_REG_APU, 0); + + if (retval != 0) { + printk(KERN_ERR "%s: Error with mc417_register_write\n", + __func__); + return -1; + } + + retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME, + &dev->pci->dev); + + if (retval != 0) { + printk(KERN_ERR + "ERROR: Hotplug firmware request failed (%s).\n", + CX2341X_FIRM_ENC_FILENAME); + printk(KERN_ERR "Please fix your hotplug setup, the board will " + "not work without firmware loaded!\n"); + return -1; + } + + if (firmware->size != CX23885_FIRM_IMAGE_SIZE) { + printk(KERN_ERR "ERROR: Firmware size mismatch " + "(have %zd, expected %d)\n", + firmware->size, CX23885_FIRM_IMAGE_SIZE); + release_firmware(firmware); + return -1; + } + + if (0 != memcmp(firmware->data, magic, 8)) { + printk(KERN_ERR + "ERROR: Firmware magic mismatch, wrong file?\n"); + release_firmware(firmware); + return -1; + } + + /* transfer to the chip */ + dprintk(2, "Loading firmware ...\n"); + dataptr = (u32 *)firmware->data; + for (i = 0; i < (firmware->size >> 2); i++) { + value = *dataptr; + checksum += ~value; + if (mc417_memory_write(dev, i, value) != 0) { + printk(KERN_ERR "ERROR: Loading firmware failed!\n"); + release_firmware(firmware); + return -1; + } + dataptr++; + } + + /* read back to verify with the checksum */ + dprintk(1, "Verifying firmware ...\n"); + for (i--; i >= 0; i--) { + if (mc417_memory_read(dev, i, &value) != 0) { + printk(KERN_ERR "ERROR: Reading firmware failed!\n"); + release_firmware(firmware); + return -1; + } + checksum -= ~value; + } + if (checksum) { + printk(KERN_ERR + "ERROR: Firmware load failed (checksum mismatch).\n"); + release_firmware(firmware); + return -1; + } + release_firmware(firmware); + dprintk(1, "Firmware upload successful.\n"); + + retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS, + IVTV_CMD_HW_BLOCKS_RST); + + /* Restore GPIO settings, make sure EIO14 is enabled as an output. */ + dprintk(2, "%s: GPIO output EIO 0-15 was = 0x%x\n", + __func__, gpio_output); + /* Power-up seems to have GPIOs AFU. This was causing digital side + * to fail at power-up. Seems GPIOs should be set to 0x10ff0411 at + * power-up. + * gpio_output |= (1<<14); + */ + /* Note: GPIO14 is specific to the HVR1800 here */ + gpio_output = 0x10ff0411 | (1<<14); + retval |= mc417_register_write(dev, 0x9020, gpio_output | (1<<14)); + dprintk(2, "%s: GPIO output EIO 0-15 now = 0x%x\n", + __func__, gpio_output); + + dprintk(1, "%s: GPIO value EIO 0-15 was = 0x%x\n", + __func__, value); + value |= (1<<14); + dprintk(1, "%s: GPIO value EIO 0-15 now = 0x%x\n", + __func__, value); + retval |= mc417_register_write(dev, 0x900C, value); + + retval |= mc417_register_read(dev, IVTV_REG_VPU, &value); + retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8); + + if (retval < 0) + printk(KERN_ERR "%s: Error with mc417_register_write\n", + __func__); + return 0; +} + +void cx23885_417_check_encoder(struct cx23885_dev *dev) +{ + u32 status, seq; + + status = seq = 0; + cx23885_api_cmd(dev, CX2341X_ENC_GET_SEQ_END, 0, 2, &status, &seq); + dprintk(1, "%s() status = %d, seq = %d\n", __func__, status, seq); +} + +static void cx23885_codec_settings(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + /* assign frame size */ + cx23885_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0, + dev->ts1.height, dev->ts1.width); + + dev->mpeg_params.width = dev->ts1.width; + dev->mpeg_params.height = dev->ts1.height; + dev->mpeg_params.is_50hz = + (dev->encodernorm.id & V4L2_STD_625_50) != 0; + + cx2341x_update(dev, cx23885_mbox_func, NULL, &dev->mpeg_params); + + cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 3, 1); + cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 4, 1); +} + +static int cx23885_initialize_codec(struct cx23885_dev *dev) +{ + int version; + int retval; + u32 i, data[7]; + + dprintk(1, "%s()\n", __func__); + + retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ + if (retval < 0) { + dprintk(2, "%s() PING OK\n", __func__); + retval = cx23885_load_firmware(dev); + if (retval < 0) { + printk(KERN_ERR "%s() f/w load failed\n", __func__); + return retval; + } + dev->cx23417_mailbox = cx23885_find_mailbox(dev); + if (dev->cx23417_mailbox < 0) { + printk(KERN_ERR "%s() mailbox < 0, error\n", + __func__); + return -1; + } + retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); + if (retval < 0) { + printk(KERN_ERR + "ERROR: cx23417 firmware ping failed!\n"); + return -1; + } + retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, + &version); + if (retval < 0) { + printk(KERN_ERR "ERROR: cx23417 firmware get encoder :" + "version failed!\n"); + return -1; + } + dprintk(1, "cx23417 firmware version is 0x%08x\n", version); + msleep(200); + } + + cx23885_codec_settings(dev); + msleep(60); + + cx23885_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, + CX23885_FIELD1_SAA7115, CX23885_FIELD2_SAA7115); + cx23885_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0, + CX23885_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0); + + /* Setup to capture VBI */ + data[0] = 0x0001BD00; + data[1] = 1; /* frames per interrupt */ + data[2] = 4; /* total bufs */ + data[3] = 0x91559155; /* start codes */ + data[4] = 0x206080C0; /* stop codes */ + data[5] = 6; /* lines */ + data[6] = 64; /* BPL */ + + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_CONFIG, 7, 0, data[0], data[1], + data[2], data[3], data[4], data[5], data[6]); + + for (i = 2; i <= 24; i++) { + int valid; + + valid = ((i >= 19) && (i <= 21)); + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, i, + valid, 0 , 0, 0); + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, + i | 0x80000000, valid, 0, 0, 0); + } + + cx23885_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, CX23885_UNMUTE); + msleep(60); + + /* initialize the video input */ + cx23885_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); + msleep(60); + + /* Enable VIP style pixel invalidation so we work with scaled mode */ + mc417_memory_write(dev, 2120, 0x00000080); + + /* start capturing to the host interface */ + cx23885_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, + CX23885_MPEG_CAPTURE, CX23885_RAW_BITS_NONE); + msleep(10); + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int bb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx23885_fh *fh = q->priv_data; + + fh->dev->ts1.ts_packet_size = mpeglinesize; + fh->dev->ts1.ts_packet_count = mpeglines; + + *size = fh->dev->ts1.ts_packet_size * fh->dev->ts1.ts_packet_count; + *count = mpegbufs; + + return 0; +} + +static int bb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + return cx23885_buf_prepare(q, &fh->dev->ts1, + (struct cx23885_buffer *)vb, + field); +} + +static void bb_buf_queue(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx23885_fh *fh = q->priv_data; + cx23885_buf_queue(&fh->dev->ts1, (struct cx23885_buffer *)vb); +} + +static void bb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + cx23885_free_buffer(q, (struct cx23885_buffer *)vb); +} + +static struct videobuf_queue_ops cx23885_qops = { + .buf_setup = bb_buf_setup, + .buf_prepare = bb_buf_prepare, + .buf_queue = bb_buf_queue, + .buf_release = bb_buf_release, +}; + +/* ------------------------------------------------------------------ */ + +static const u32 *ctrl_classes[] = { + cx2341x_mpeg_ctrls, + NULL +}; + +static int cx23885_queryctrl(struct cx23885_dev *dev, + struct v4l2_queryctrl *qctrl) +{ + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); + if (qctrl->id == 0) + return -EINVAL; + + /* MPEG V4L2 controls */ + if (cx2341x_ctrl_query(&dev->mpeg_params, qctrl)) + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + + return 0; +} + +static int cx23885_querymenu(struct cx23885_dev *dev, + struct v4l2_querymenu *qmenu) +{ + struct v4l2_queryctrl qctrl; + + qctrl.id = qmenu->id; + cx23885_queryctrl(dev, &qctrl); + return v4l2_ctrl_query_menu(qmenu, &qctrl, + cx2341x_ctrl_get_menu(qmenu->id)); +} + +int cx23885_do_ioctl(struct inode *inode, struct file *file, int radio, + struct cx23885_dev *dev, unsigned int cmd, void *arg, + v4l2_kioctl driver_ioctl) +{ + int err; + + switch (cmd) { + /* ---------- tv norms ---------- */ + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *e = arg; + unsigned int i; + + i = e->index; + if (i >= ARRAY_SIZE(cx23885_tvnorms)) + return -EINVAL; + err = v4l2_video_std_construct(e, + cx23885_tvnorms[e->index].id, + cx23885_tvnorms[e->index].name); + e->index = i; + if (err < 0) + return err; + return 0; + } + case VIDIOC_G_STD: + { + v4l2_std_id *id = arg; + + *id = dev->encodernorm.id; + return 0; + } + case VIDIOC_S_STD: + { + v4l2_std_id *id = arg; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(cx23885_tvnorms); i++) + if (*id & cx23885_tvnorms[i].id) + break; + if (i == ARRAY_SIZE(cx23885_tvnorms)) + return -EINVAL; + dev->encodernorm = cx23885_tvnorms[i]; + + return 0; + } + + /* ------ input switching ---------- */ + case VIDIOC_ENUMINPUT: + { + struct cx23885_input *input; + struct v4l2_input *i = arg; + unsigned int n; + + n = i->index; + if (n >= 4) + return -EINVAL; + input = &cx23885_boards[dev->board].input[n]; + if (input->type == 0) + return -EINVAL; + memset(i, 0, sizeof(*i)); + i->index = n; + /* FIXME + * strcpy(i->name, input->name); */ + strcpy(i->name, "unset"); + if (input->type == CX23885_VMUX_TELEVISION || + input->type == CX23885_VMUX_CABLE) + i->type = V4L2_INPUT_TYPE_TUNER; + else + i->type = V4L2_INPUT_TYPE_CAMERA; + + for (n = 0; n < ARRAY_SIZE(cx23885_tvnorms); n++) + i->std |= cx23885_tvnorms[n].id; + return 0; + } + case VIDIOC_G_INPUT: + { + unsigned int *i = arg; + + *i = dev->input; + return 0; + } + case VIDIOC_S_INPUT: + { + unsigned int *i = arg; + + if (*i >= 4) + return -EINVAL; + + return 0; + } + + /* --- tuner ioctls ------------------------------------------ */ + case VIDIOC_G_TUNER: + { + struct v4l2_tuner *t = arg; + + if (UNSET == dev->tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Television"); + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_TUNER, t); + cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_TUNER, t); + + dprintk(1, "VIDIOC_G_TUNER: tuner type %d\n", t->type); + + return 0; + } + case VIDIOC_S_TUNER: + { + struct v4l2_tuner *t = arg; + + if (UNSET == dev->tuner_type) + return -EINVAL; + + /* Update the A/V core */ + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_TUNER, t); + + return 0; + } + case VIDIOC_G_FREQUENCY: + { + struct v4l2_frequency *f = arg; + + memset(f, 0, sizeof(*f)); + if (UNSET == dev->tuner_type) + return -EINVAL; + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = dev->freq; + + /* Assumption that tuner is always on bus 1 */ + cx23885_call_i2c_clients(&dev->i2c_bus[1], + VIDIOC_G_FREQUENCY, f); + + return 0; + } + case VIDIOC_S_FREQUENCY: + { + struct v4l2_frequency *f = arg; + + dprintk(1, "VIDIOC_S_FREQUENCY: dev type %d, f\n", + dev->tuner_type); + dprintk(1, "VIDIOC_S_FREQUENCY: f tuner %d, f type %d\n", + f->tuner, f->type); + if (UNSET == dev->tuner_type) + return -EINVAL; + if (f->tuner != 0) + return -EINVAL; + if (f->type != V4L2_TUNER_ANALOG_TV) + return -EINVAL; + dev->freq = f->frequency; + + /* Assumption that tuner is always on bus 1 */ + cx23885_call_i2c_clients(&dev->i2c_bus[1], + VIDIOC_S_FREQUENCY, f); + return 0; + } + case VIDIOC_S_CTRL: + { + /* Update the A/V core */ + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_CTRL, arg); + return 0; + } + default: + /* Convert V4L ioctl to V4L2 and call mpeg_do_ioctl + * (driver_ioctl) */ + return v4l_compat_translate_ioctl(inode, file, cmd, arg, + driver_ioctl); + } + + return 0; +} + +static int mpeg_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_tsport *tsport = &dev->ts1; + + if (v4l_debug > 1) + v4l_print_ioctl(dev->name, cmd); + + switch (cmd) { + + /* --- capabilities ------------------------------------------ */ + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = arg; + + memset(cap, 0, sizeof(*cap)); + strcpy(cap->driver, dev->name); + strlcpy(cap->card, cx23885_boards[tsport->dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->version = CX23885_VERSION_CODE; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + 0; + if (UNSET != dev->tuner_type) + cap->capabilities |= V4L2_CAP_TUNER; + + return 0; + } + + /* --- capture ioctls ---------------------------------------- */ + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *f = arg; + int index; + + index = f->index; + if (index != 0) + return -EINVAL; + + memset(f, 0, sizeof(*f)); + f->index = index; + strlcpy(f->description, "MPEG", sizeof(f->description)); + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->pixelformat = V4L2_PIX_FMT_MPEG; + return 0; + } + case VIDIOC_G_FMT: + { + struct v4l2_format *f = arg; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + f->fmt.pix.width = dev->ts1.width; + f->fmt.pix.height = dev->ts1.height; + f->fmt.pix.field = fh->mpegq.field; + dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d, f: %d\n", + dev->ts1.width, dev->ts1.height, fh->mpegq.field); + return 0; + } + case VIDIOC_TRY_FMT: + { + struct v4l2_format *f = arg; + + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.sizeimage = + f->fmt.pix.colorspace = 0; + dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n", + dev->ts1.width, dev->ts1.height, fh->mpegq.field); + return 0; + } + case VIDIOC_S_FMT: + { + struct v4l2_format *f = arg; + + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + dprintk(1, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", + f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); + return 0; + } + + /* --- streaming capture ------------------------------------- */ + case VIDIOC_REQBUFS: + return videobuf_reqbufs(&fh->mpegq, arg); + + case VIDIOC_QUERYBUF: + return videobuf_querybuf(&fh->mpegq, arg); + + case VIDIOC_QBUF: + return videobuf_qbuf(&fh->mpegq, arg); + + case VIDIOC_DQBUF: + return videobuf_dqbuf(&fh->mpegq, arg, + file->f_flags & O_NONBLOCK); + + case VIDIOC_STREAMON: + return videobuf_streamon(&fh->mpegq); + + case VIDIOC_STREAMOFF: + return videobuf_streamoff(&fh->mpegq); + + case VIDIOC_G_EXT_CTRLS: + { + struct v4l2_ext_controls *f = arg; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + return cx2341x_ext_ctrls(&dev->mpeg_params, 0, f, cmd); + } + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_TRY_EXT_CTRLS: + { + struct v4l2_ext_controls *f = arg; + struct cx2341x_mpeg_params p; + int err; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + p = dev->mpeg_params; + err = cx2341x_ext_ctrls(&p, 0, f, cmd); + if (err == 0 && cmd == VIDIOC_S_EXT_CTRLS) { + err = cx2341x_update(dev, cx23885_mbox_func, + &dev->mpeg_params, &p); + dev->mpeg_params = p; + } + return err; + } + case VIDIOC_S_FREQUENCY: + { + cx23885_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, + CX23885_END_NOW, CX23885_MPEG_CAPTURE, + CX23885_RAW_BITS_NONE); + cx23885_do_ioctl(inode, file, 0, dev, cmd, arg, + mpeg_do_ioctl); + cx23885_initialize_codec(dev); + + return 0; + } + case VIDIOC_LOG_STATUS: + { + char name[32 + 2]; + + snprintf(name, sizeof(name), "%s/2", dev->name); + printk(KERN_INFO + "%s/2: ============ START LOG STATUS ============\n", + dev->name); + cx23885_call_i2c_clients(&dev->i2c_bus[0], VIDIOC_LOG_STATUS, + NULL); + cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_LOG_STATUS, + NULL); + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_LOG_STATUS, + NULL); + cx2341x_log_status(&dev->mpeg_params, name); + printk(KERN_INFO + "%s/2: ============= END LOG STATUS =============\n", + dev->name); + return 0; + } + case VIDIOC_QUERYMENU: + return cx23885_querymenu(dev, arg); + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *c = arg; + + return cx23885_queryctrl(dev, c); + } + + default: + return cx23885_do_ioctl(inode, file, 0, dev, cmd, arg, + mpeg_do_ioctl); + } + return 0; +} + +static int mpeg_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, mpeg_do_ioctl); +} + +static int mpeg_open(struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct cx23885_dev *h, *dev = NULL; + struct list_head *list; + struct cx23885_fh *fh; + + dprintk(2, "%s()\n", __func__); + + list_for_each(list, &cx23885_devlist) { + h = list_entry(list, struct cx23885_dev, devlist); + if (h->v4l_device->minor == minor) { + dev = h; + break; + } + } + + if (dev == NULL) + return -ENODEV; + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + + file->private_data = fh; + fh->dev = dev; + + videobuf_queue_sg_init(&fh->mpegq, &cx23885_qops, + &dev->pci->dev, &dev->ts1.slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx23885_buffer), + fh); + + return 0; +} + +static int mpeg_release(struct inode *inode, struct file *file) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + /* FIXME: Review this crap */ + /* Shut device down on last close */ + if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { + if (atomic_dec_return(&dev->v4l_reader_count) == 0) { + /* stop mpeg capture */ + cx23885_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, + CX23885_END_NOW, CX23885_MPEG_CAPTURE, + CX23885_RAW_BITS_NONE); + + msleep(500); + cx23885_417_check_encoder(dev); + + cx23885_cancel_buffers(&fh->dev->ts1); + } + } + + if (fh->mpegq.streaming) + videobuf_streamoff(&fh->mpegq); + if (fh->mpegq.reading) + videobuf_read_stop(&fh->mpegq); + + videobuf_mmap_free(&fh->mpegq); + file->private_data = NULL; + kfree(fh); + + return 0; +} + +static ssize_t mpeg_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + /* Deal w/ A/V decoder * and mpeg encoder sync issues. */ + /* Start mpeg encoder on first read. */ + if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { + if (atomic_inc_return(&dev->v4l_reader_count) == 1) { + if (cx23885_initialize_codec(dev) < 0) + return -EINVAL; + } + } + + return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0, + file->f_flags & O_NONBLOCK); +} + +static unsigned int mpeg_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s\n", __func__); + + return videobuf_poll_stream(file, &fh->mpegq, wait); +} + +static int mpeg_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + return videobuf_mmap_mapper(&fh->mpegq, vma); +} + +static struct file_operations mpeg_fops = { + .owner = THIS_MODULE, + .open = mpeg_open, + .release = mpeg_release, + .read = mpeg_read, + .poll = mpeg_poll, + .mmap = mpeg_mmap, + .ioctl = mpeg_ioctl, + .llseek = no_llseek, +}; + +static struct video_device cx23885_mpeg_template = { + .name = "cx23885", + .type = VID_TYPE_CAPTURE | + VID_TYPE_TUNER | + VID_TYPE_SCALES | + VID_TYPE_MPEG_ENCODER, + .fops = &mpeg_fops, + .minor = -1, +}; + +void cx23885_417_unregister(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + if (dev->v4l_device) { + if (-1 != dev->v4l_device->minor) + video_unregister_device(dev->v4l_device); + else + video_device_release(dev->v4l_device); + dev->v4l_device = NULL; + } +} + +static struct video_device *cx23885_video_dev_alloc( + struct cx23885_tsport *tsport, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + struct cx23885_dev *dev = tsport->dev; + + dprintk(1, "%s()\n", __func__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + vfd->minor = -1; + snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, + type, cx23885_boards[tsport->dev->board].name); + vfd->dev = &pci->dev; + vfd->release = video_device_release; + return vfd; +} + +int cx23885_417_register(struct cx23885_dev *dev) +{ + /* FIXME: Port1 hardcoded here */ + int err = -ENODEV; + struct cx23885_tsport *tsport = &dev->ts1; + + dprintk(1, "%s()\n", __func__); + + if (cx23885_boards[dev->board].portb != CX23885_MPEG_ENCODER) + return err; + + /* Set default TV standard */ + dev->encodernorm = cx23885_tvnorms[0]; + + if (dev->encodernorm.id & V4L2_STD_525_60) + tsport->height = 480; + else + tsport->height = 576; + + tsport->width = 720; + cx2341x_fill_defaults(&dev->mpeg_params); + + dev->mpeg_params.port = CX2341X_PORT_SERIAL; + + /* Allocate and initialize V4L video device */ + dev->v4l_device = cx23885_video_dev_alloc(tsport, + dev->pci, &cx23885_mpeg_template, "mpeg"); + err = video_register_device(dev->v4l_device, + VFL_TYPE_GRABBER, -1); + if (err < 0) { + printk(KERN_INFO "%s: can't register mpeg device\n", dev->name); + return err; + } + + /* Initialize MC417 registers */ + cx23885_mc417_init(dev); + + printk(KERN_INFO "%s: registered device video%d [mpeg]\n", + dev->name, dev->v4l_device->minor & 0x1f); + + return 0; +} diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 2d414dad5c3..20e05f23054 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -73,6 +73,7 @@ struct cx23885_board cx23885_boards[] = { [CX23885_BOARD_HAUPPAUGE_HVR1800] = { .name = "Hauppauge WinTV-HVR1800", .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_ENCODER, .portc = CX23885_MPEG_DVB, .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x42, /* 0x84 >> 1 */ @@ -130,6 +131,18 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1500", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1200] = { + .name = "Hauppauge WinTV-HVR1200", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1700] = { + .name = "Hauppauge WinTV-HVR1700", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1400] = { + .name = "Hauppauge WinTV-HVR1400", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -181,6 +194,22 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x7717, .card = CX23885_BOARD_HAUPPAUGE_HVR1500, + }, { + .subvendor = 0x0070, + .subdevice = 0x71d1, + .card = CX23885_BOARD_HAUPPAUGE_HVR1200, + }, { + .subvendor = 0x0070, + .subdevice = 0x71d3, + .card = CX23885_BOARD_HAUPPAUGE_HVR1200, + }, { + .subvendor = 0x0070, + .subdevice = 0x8101, + .card = CX23885_BOARD_HAUPPAUGE_HVR1700, + }, { + .subvendor = 0x0070, + .subdevice = 0x8010, + .card = CX23885_BOARD_HAUPPAUGE_HVR1400, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -220,6 +249,33 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) /* Make sure we support the board model */ switch (tv.model) { + case 71009: + /* WinTV-HVR1200 (PCIe, Retail, full height) + * DVB-T and basic analog */ + case 71359: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71439: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71449: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71939: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71949: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71959: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71979: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71999: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */ case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */ case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */ @@ -232,8 +288,18 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */ case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */ + case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */ case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ + case 80019: + /* WinTV-HVR1400 (Express Card, Retail, IR, + * DVB-T and Basic analog */ + case 81509: + /* WinTV-HVR1700 (PCIe, OEM, No IR, half height) + * DVB-T and MPEG2 HW Encoder */ + case 81519: + /* WinTV-HVR1700 (PCIe, OEM, No IR, full height) + * DVB-T and MPEG2 HW Encoder */ break; default: printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model); @@ -263,7 +329,7 @@ int cx23885_tuner_callback(void *priv, int command, int arg) } else { printk(KERN_ERR - "%s(): Unknow command.\n", __FUNCTION__); + "%s(): Unknow command.\n", __func__); return -EINVAL; } break; @@ -305,6 +371,10 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* GPIO-15-18 cx23417 READY, CS, RD, WR */ /* GPIO-19 IR_RX */ + /* CX23417 GPIO's */ + /* EIO15 Zilog Reset */ + /* EIO14 S5H1409/CX24227 Reset */ + /* Force the TDA8295A into reset and back */ cx_set(GP0_IO, 0x00040004); mdelay(20); @@ -313,6 +383,50 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x00040004); mdelay(20); break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + /* GPIO-0 tda10048 demodulator reset */ + /* GPIO-2 tda18271 tuner reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1700: + /* GPIO-0 TDA10048 demodulator reset */ + /* GPIO-2 TDA8295A Reset */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + + /* The following GPIO's are on the interna AVCore (cx25840) */ + /* GPIO-19 IR_RX */ + /* GPIO-20 IR_TX 416/DVBT Select */ + /* GPIO-21 IIS DAT */ + /* GPIO-22 IIS WCLK */ + /* GPIO-23 IIS BCLK */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + /* GPIO-0 Dibcom7000p demodulator reset */ + /* GPIO-2 xc3028L tuner reset */ + /* GPIO-13 LED */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; } } @@ -323,6 +437,8 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1400: /* FIXME: Implement me */ break; } @@ -347,10 +463,16 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1400: + if (dev->i2c_bus[0].i2c_rc == 0) + hauppauge_eeprom(dev, eeprom+0x80); + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: if (dev->i2c_bus[0].i2c_rc == 0) - hauppauge_eeprom(dev, eeprom+0x80); + hauppauge_eeprom(dev, eeprom+0xc0); break; } @@ -360,17 +482,45 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + /* Defaults for VID B - Analog encoder */ + /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */ + ts1->gen_ctrl_val = 0x10e; + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + + /* APB_TSVALERR_POL (active low)*/ + ts1->vld_misc_val = 0x2000; + ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc); + + /* Defaults for VID C */ + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: - case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_HAUPPAUGE_HVR1400: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; } + /* Certain boards support analog, or require the avcore to be + * loaded, ensure this happens. + */ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + request_module("cx25840"); + break; + } } /* ------------------------------------------------------------------ */ diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 8e40c7bcc06..c4cc2f3b887 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -56,137 +56,6 @@ LIST_HEAD(cx23885_devlist); #define NO_SYNC_LINE (-1U) -/* - * CX23885 Assumptions - * 1 line = 16 bytes of CDT - * cmds size = 80 - * cdt size = 16 * linesize - * iqsize = 64 - * maxlines = 6 - * - * Address Space: - * 0x00000000 0x00008fff FIFO clusters - * 0x00010000 0x000104af Channel Management Data Structures - * 0x000104b0 0x000104ff Free - * 0x00010500 0x000108bf 15 channels * iqsize - * 0x000108c0 0x000108ff Free - * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables - * 15 channels * (iqsize + (maxlines * linesize)) - * 0x00010ea0 0x00010xxx Free - */ - -static struct sram_channel cx23885_sram_channels[] = { - [SRAM_CH01] = { - .name = "VID A", - .cmds_start = 0x10000, - .ctrl_start = 0x105b0, - .cdt = 0x107b0, - .fifo_start = 0x40, - .fifo_size = 0x2800, - .ptr1_reg = DMA1_PTR1, - .ptr2_reg = DMA1_PTR2, - .cnt1_reg = DMA1_CNT1, - .cnt2_reg = DMA1_CNT2, - .jumponly = 1, - }, - [SRAM_CH02] = { - .name = "ch2", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA2_PTR1, - .ptr2_reg = DMA2_PTR2, - .cnt1_reg = DMA2_CNT1, - .cnt2_reg = DMA2_CNT2, - }, - [SRAM_CH03] = { - .name = "TS1 B", - .cmds_start = 0x100A0, - .ctrl_start = 0x10630, - .cdt = 0x10870, - .fifo_start = 0x5000, - .fifo_size = 0x1000, - .ptr1_reg = DMA3_PTR1, - .ptr2_reg = DMA3_PTR2, - .cnt1_reg = DMA3_CNT1, - .cnt2_reg = DMA3_CNT2, - }, - [SRAM_CH04] = { - .name = "ch4", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA4_PTR1, - .ptr2_reg = DMA4_PTR2, - .cnt1_reg = DMA4_CNT1, - .cnt2_reg = DMA4_CNT2, - }, - [SRAM_CH05] = { - .name = "ch5", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA5_PTR1, - .ptr2_reg = DMA5_PTR2, - .cnt1_reg = DMA5_CNT1, - .cnt2_reg = DMA5_CNT2, - }, - [SRAM_CH06] = { - .name = "TS2 C", - .cmds_start = 0x10140, - .ctrl_start = 0x10680, - .cdt = 0x108d0, - .fifo_start = 0x6000, - .fifo_size = 0x1000, - .ptr1_reg = DMA5_PTR1, - .ptr2_reg = DMA5_PTR2, - .cnt1_reg = DMA5_CNT1, - .cnt2_reg = DMA5_CNT2, - }, - [SRAM_CH07] = { - .name = "ch7", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA6_PTR1, - .ptr2_reg = DMA6_PTR2, - .cnt1_reg = DMA6_CNT1, - .cnt2_reg = DMA6_CNT2, - }, - [SRAM_CH08] = { - .name = "ch8", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA7_PTR1, - .ptr2_reg = DMA7_PTR2, - .cnt1_reg = DMA7_CNT1, - .cnt2_reg = DMA7_CNT2, - }, - [SRAM_CH09] = { - .name = "ch9", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA8_PTR1, - .ptr2_reg = DMA8_PTR2, - .cnt1_reg = DMA8_CNT1, - .cnt2_reg = DMA8_CNT2, - }, -}; - /* FIXME, these allocations will change when * analog arrives. The be reviewed. * CX23887 Assumptions @@ -321,25 +190,25 @@ static struct sram_channel cx23887_sram_channels[] = { static int cx23885_risc_decode(u32 risc) { static char *instr[16] = { - [ RISC_SYNC >> 28 ] = "sync", - [ RISC_WRITE >> 28 ] = "write", - [ RISC_WRITEC >> 28 ] = "writec", - [ RISC_READ >> 28 ] = "read", - [ RISC_READC >> 28 ] = "readc", - [ RISC_JUMP >> 28 ] = "jump", - [ RISC_SKIP >> 28 ] = "skip", - [ RISC_WRITERM >> 28 ] = "writerm", - [ RISC_WRITECM >> 28 ] = "writecm", - [ RISC_WRITECR >> 28 ] = "writecr", + [RISC_SYNC >> 28] = "sync", + [RISC_WRITE >> 28] = "write", + [RISC_WRITEC >> 28] = "writec", + [RISC_READ >> 28] = "read", + [RISC_READC >> 28] = "readc", + [RISC_JUMP >> 28] = "jump", + [RISC_SKIP >> 28] = "skip", + [RISC_WRITERM >> 28] = "writerm", + [RISC_WRITECM >> 28] = "writecm", + [RISC_WRITECR >> 28] = "writecr", }; static int incr[16] = { - [ RISC_WRITE >> 28 ] = 3, - [ RISC_JUMP >> 28 ] = 3, - [ RISC_SKIP >> 28 ] = 1, - [ RISC_SYNC >> 28 ] = 1, - [ RISC_WRITERM >> 28 ] = 3, - [ RISC_WRITECM >> 28 ] = 3, - [ RISC_WRITECR >> 28 ] = 4, + [RISC_WRITE >> 28] = 3, + [RISC_JUMP >> 28] = 3, + [RISC_SKIP >> 28] = 1, + [RISC_SYNC >> 28] = 1, + [RISC_WRITERM >> 28] = 3, + [RISC_WRITECM >> 28] = 3, + [RISC_WRITECR >> 28] = 4, }; static char *bits[] = { "12", "13", "14", "resync", @@ -391,7 +260,7 @@ void cx23885_wakeup(struct cx23885_tsport *port, } if (bc != 1) printk("%s: %d buffers handled (should be 1)\n", - __FUNCTION__, bc); + __func__, bc); } int cx23885_sram_channel_setup(struct cx23885_dev *dev, @@ -403,7 +272,7 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, if (ch->cmds_start == 0) { - dprintk(1, "%s() Erasing channel [%s]\n", __FUNCTION__, + dprintk(1, "%s() Erasing channel [%s]\n", __func__, ch->name); cx_write(ch->ptr1_reg, 0); cx_write(ch->ptr2_reg, 0); @@ -411,7 +280,7 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, cx_write(ch->cnt1_reg, 0); return 0; } else { - dprintk(1, "%s() Configuring channel [%s]\n", __FUNCTION__, + dprintk(1, "%s() Configuring channel [%s]\n", __func__, ch->name); } @@ -428,7 +297,7 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, /* write CDT */ for (i = 0; i < lines; i++) { - dprintk(2, "%s() 0x%08x <- 0x%08x\n", __FUNCTION__, cdt + 16*i, + dprintk(2, "%s() 0x%08x <- 0x%08x\n", __func__, cdt + 16*i, ch->fifo_start + bpl*i); cx_write(cdt + 16*i, ch->fifo_start + bpl*i); cx_write(cdt + 16*i + 4, 0); @@ -580,7 +449,7 @@ static void cx23885_shutdown(struct cx23885_dev *dev) static void cx23885_reset(struct cx23885_dev *dev) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); cx23885_shutdown(dev); @@ -613,7 +482,7 @@ static void cx23885_reset(struct cx23885_dev *dev) static int cx23885_pci_quirks(struct cx23885_dev *dev) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); /* The cx23885 bridge has a weird bug which causes NMI to be asserted * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not @@ -644,11 +513,13 @@ int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *port, int portno) { - dprintk(1, "%s(portno=%d)\n", __FUNCTION__, portno); + dprintk(1, "%s(portno=%d)\n", __func__, portno); /* Transport bus init dma queue - Common settings */ port->dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ port->ts_int_msk_val = 0x1111; /* TS port bits for RISC */ + port->vld_misc_val = 0x0; + port->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4); spin_lock_init(&port->slock); port->dev = dev; @@ -675,7 +546,7 @@ static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *p port->reg_ts_clk_en = VID_B_TS_CLK_EN; port->reg_src_sel = VID_B_SRC_SEL; port->reg_ts_int_msk = VID_B_INT_MSK; - port->reg_ts_int_stat = VID_B_INT_STAT; + port->reg_ts_int_stat = VID_B_INT_STAT; port->sram_chno = SRAM_CH03; /* VID_B */ port->pci_irqmask = 0x02; /* VID_B bit1 */ break; @@ -735,14 +606,14 @@ static void cx23885_dev_checkrevision(struct cx23885_dev *dev) break; default: printk(KERN_ERR "%s() New hardware revision found 0x%x\n", - __FUNCTION__, dev->hwrevision); + __func__, dev->hwrevision); } if (dev->hwrevision) printk(KERN_INFO "%s() Hardware revision = 0x%02x\n", - __FUNCTION__, dev->hwrevision); + __func__, dev->hwrevision); else printk(KERN_ERR "%s() Hardware revision unknown 0x%x\n", - __FUNCTION__, dev->hwrevision); + __func__, dev->hwrevision); } static int cx23885_dev_setup(struct cx23885_dev *dev) @@ -754,6 +625,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) atomic_inc(&dev->refcount); dev->nr = cx23885_devcount++; + dev->sram_channels = cx23887_sram_channels; sprintf(dev->name, "cx23885[%d]", dev->nr); mutex_lock(&devlist); @@ -763,20 +635,18 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) /* Configure the internal memory */ if(dev->pci->device == 0x8880) { dev->bridge = CX23885_BRIDGE_887; - dev->sram_channels = cx23887_sram_channels; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 25000000; } else if(dev->pci->device == 0x8852) { dev->bridge = CX23885_BRIDGE_885; - dev->sram_channels = cx23885_sram_channels; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 28000000; } else BUG(); dprintk(1, "%s() Memory configured for PCIe bridge type %d\n", - __FUNCTION__, dev->bridge); + __func__, dev->bridge); /* board config */ dev->board = UNSET; @@ -829,10 +699,12 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) dev->i2c_bus[2].reg_wdata = I2C3_WDATA; dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */ - if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + if ((cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) || + (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)) cx23885_init_tsport(dev, &dev->ts1, 1); - if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + if ((cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) || + (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) cx23885_init_tsport(dev, &dev->ts2, 2); if (get_resources(dev) < 0) { @@ -866,9 +738,9 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) dev->radio_addr = cx23885_boards[dev->board].radio_addr; dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x\n", - __FUNCTION__, dev->tuner_type, dev->tuner_addr); + __func__, dev->tuner_type, dev->tuner_addr); dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n", - __FUNCTION__, dev->radio_type, dev->radio_addr); + __func__, dev->radio_type, dev->radio_addr); /* init hardware */ cx23885_reset(dev); @@ -876,28 +748,43 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_i2c_register(&dev->i2c_bus[0]); cx23885_i2c_register(&dev->i2c_bus[1]); cx23885_i2c_register(&dev->i2c_bus[2]); - cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); cx23885_card_setup(dev); + cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); cx23885_ir_init(dev); if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { if (cx23885_video_register(dev) < 0) { printk(KERN_ERR "%s() Failed to register analog " - "video adapters on VID_A\n", __FUNCTION__); + "video adapters on VID_A\n", __func__); } } if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { if (cx23885_dvb_register(&dev->ts1) < 0) { printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n", - __FUNCTION__); + __func__); + } + } else + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { + if (cx23885_417_register(dev) < 0) { + printk(KERN_ERR + "%s() Failed to register 417 on VID_B\n", + __func__); } } if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { if (cx23885_dvb_register(&dev->ts2) < 0) { - printk(KERN_ERR "%s() Failed to register dvb adapters on VID_C\n", - __FUNCTION__); + printk(KERN_ERR + "%s() Failed to register dvb on VID_C\n", + __func__); + } + } else + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) { + if (cx23885_417_register(dev) < 0) { + printk(KERN_ERR + "%s() Failed to register 417 on VID_C\n", + __func__); } } @@ -917,12 +804,18 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) cx23885_video_unregister(dev); - if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) cx23885_dvb_unregister(&dev->ts1); - if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_417_unregister(dev); + + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) cx23885_dvb_unregister(&dev->ts2); + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) + cx23885_417_unregister(dev); + cx23885_i2c_unregister(&dev->i2c_bus[2]); cx23885_i2c_unregister(&dev->i2c_bus[1]); cx23885_i2c_unregister(&dev->i2c_bus[0]); @@ -930,7 +823,7 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) iounmap(dev->lmmio); } -static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines) @@ -990,7 +883,7 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int padding, unsigned int lines) { u32 instructions, fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -1031,7 +924,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, unsigned int lines) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -1058,7 +951,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) @@ -1084,7 +977,7 @@ void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf) videobuf_waiton(&buf->vb, 0, 0); videobuf_dma_unmap(q, dma); videobuf_dma_free(dma); - btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc); + btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); buf->vb.state = VIDEOBUF_NEEDS_INIT; } @@ -1092,50 +985,50 @@ static void cx23885_tsport_reg_dump(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; - dprintk(1, "%s() Register Dump\n", __FUNCTION__); - dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() Register Dump\n", __func__); + dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __func__, cx_read(DEV_CNTRL2)); - dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __func__, cx_read(PCI_INT_MSK)); - dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __func__, cx_read(AUDIO_INT_INT_MSK)); - dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __func__, cx_read(AUD_INT_DMA_CTL)); - dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08X\n", __func__, cx_read(AUDIO_EXT_INT_MSK)); - dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08X\n", __func__, cx_read(AUD_EXT_DMA_CTL)); - dprintk(1, "%s() PAD_CTRL 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() PAD_CTRL 0x%08X\n", __func__, cx_read(PAD_CTRL)); - dprintk(1, "%s() ALT_PIN_OUT_SEL 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() ALT_PIN_OUT_SEL 0x%08X\n", __func__, cx_read(ALT_PIN_OUT_SEL)); - dprintk(1, "%s() GPIO2 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() GPIO2 0x%08X\n", __func__, cx_read(GPIO2)); - dprintk(1, "%s() gpcnt(0x%08X) 0x%08X\n", __FUNCTION__, + dprintk(1, "%s() gpcnt(0x%08X) 0x%08X\n", __func__, port->reg_gpcnt, cx_read(port->reg_gpcnt)); - dprintk(1, "%s() gpcnt_ctl(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() gpcnt_ctl(0x%08X) 0x%08x\n", __func__, port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl)); - dprintk(1, "%s() dma_ctl(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() dma_ctl(0x%08X) 0x%08x\n", __func__, port->reg_dma_ctl, cx_read(port->reg_dma_ctl)); - dprintk(1, "%s() src_sel(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() src_sel(0x%08X) 0x%08x\n", __func__, port->reg_src_sel, cx_read(port->reg_src_sel)); - dprintk(1, "%s() lngth(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() lngth(0x%08X) 0x%08x\n", __func__, port->reg_lngth, cx_read(port->reg_lngth)); - dprintk(1, "%s() hw_sop_ctrl(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() hw_sop_ctrl(0x%08X) 0x%08x\n", __func__, port->reg_hw_sop_ctrl, cx_read(port->reg_hw_sop_ctrl)); - dprintk(1, "%s() gen_ctrl(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() gen_ctrl(0x%08X) 0x%08x\n", __func__, port->reg_gen_ctrl, cx_read(port->reg_gen_ctrl)); - dprintk(1, "%s() bd_pkt_status(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() bd_pkt_status(0x%08X) 0x%08x\n", __func__, port->reg_bd_pkt_status, cx_read(port->reg_bd_pkt_status)); - dprintk(1, "%s() sop_status(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() sop_status(0x%08X) 0x%08x\n", __func__, port->reg_sop_status, cx_read(port->reg_sop_status)); - dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __func__, port->reg_fifo_ovfl_stat, cx_read(port->reg_fifo_ovfl_stat)); - dprintk(1, "%s() vld_misc(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() vld_misc(0x%08X) 0x%08x\n", __func__, port->reg_vld_misc, cx_read(port->reg_vld_misc)); - dprintk(1, "%s() ts_clk_en(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() ts_clk_en(0x%08X) 0x%08x\n", __func__, port->reg_ts_clk_en, cx_read(port->reg_ts_clk_en)); - dprintk(1, "%s() ts_int_msk(0x%08X) 0x%08x\n", __FUNCTION__, + dprintk(1, "%s() ts_int_msk(0x%08X) 0x%08x\n", __func__, port->reg_ts_int_msk, cx_read(port->reg_ts_int_msk)); } @@ -1144,8 +1037,9 @@ static int cx23885_start_dma(struct cx23885_tsport *port, struct cx23885_buffer *buf) { struct cx23885_dev *dev = port->dev; + u32 reg; - dprintk(1, "%s() w: %d, h: %d, f: %d\n", __FUNCTION__, + dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__, buf->vb.width, buf->vb.height, buf->vb.field); /* setup fifo + format */ @@ -1163,21 +1057,24 @@ static int cx23885_start_dma(struct cx23885_tsport *port, if ( (!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB)) ) { printk( "%s() Failed. Unsupported value in .portb/c (0x%08x)/(0x%08x)\n", - __FUNCTION__, + __func__, cx23885_boards[dev->board].portb, cx23885_boards[dev->board].portc ); return -EINVAL; } + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 0); + udelay(100); /* If the port supports SRC SELECT, configure it */ if(port->reg_src_sel) cx_write(port->reg_src_sel, port->src_sel_val); - cx_write(port->reg_hw_sop_ctrl, 0x47 << 16 | 188 << 4); + cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val); cx_write(port->reg_ts_clk_en, port->ts_clk_en_val); - cx_write(port->reg_vld_misc, 0x00); + cx_write(port->reg_vld_misc, port->vld_misc_val); cx_write(port->reg_gen_ctrl, port->gen_ctrl_val); udelay(100); @@ -1186,11 +1083,26 @@ static int cx23885_start_dma(struct cx23885_tsport *port, cx_write(port->reg_gpcnt_ctl, 3); q->count = 1; + if (cx23885_boards[dev->board].portb & CX23885_MPEG_ENCODER) { + + reg = cx_read(PAD_CTRL); + reg = reg & ~0x1; /* Clear TS1_OE */ + + /* FIXME, bit 2 writing here is questionable */ + /* set TS1_SOP_OE and TS1_OE_HI */ + reg = reg | 0xa; + cx_write(PAD_CTRL, reg); + + /* FIXME and these two registers should be documented. */ + cx_write(CLK_DELAY, cx_read(CLK_DELAY) | 0x80000011); + cx_write(ALT_PIN_OUT_SEL, 0x10100045); + } + switch(dev->bridge) { case CX23885_BRIDGE_885: case CX23885_BRIDGE_887: /* enable irqs */ - dprintk(1, "%s() enabling TS int's and DMA\n", __FUNCTION__ ); + dprintk(1, "%s() enabling TS int's and DMA\n", __func__ ); cx_set(port->reg_ts_int_msk, port->ts_int_msk_val); cx_set(port->reg_dma_ctl, port->dma_ctl_val); cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask); @@ -1201,6 +1113,9 @@ static int cx23885_start_dma(struct cx23885_tsport *port, cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */ + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 1); + if (debug > 4) cx23885_tsport_reg_dump(port); @@ -1210,12 +1125,32 @@ static int cx23885_start_dma(struct cx23885_tsport *port, static int cx23885_stop_dma(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; - dprintk(1, "%s()\n", __FUNCTION__); + u32 reg; + + dprintk(1, "%s()\n", __func__); /* Stop interrupts and DMA */ cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val); cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + if (cx23885_boards[dev->board].portb & CX23885_MPEG_ENCODER) { + + reg = cx_read(PAD_CTRL); + + /* Set TS1_OE */ + reg = reg | 0x1; + + /* clear TS1_SOP_OE and TS1_OE_HI */ + reg = reg & ~0xa; + cx_write(PAD_CTRL, reg); + cx_write(port->reg_src_sel, 0); + cx_write(port->reg_gen_ctrl, 8); + + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 0); + return 0; } @@ -1225,13 +1160,13 @@ int cx23885_restart_queue(struct cx23885_tsport *port, struct cx23885_dev *dev = port->dev; struct cx23885_buffer *buf; - dprintk(5, "%s()\n", __FUNCTION__); + dprintk(5, "%s()\n", __func__); if (list_empty(&q->active)) { struct cx23885_buffer *prev; prev = NULL; - dprintk(5, "%s() queue is empty\n", __FUNCTION__); + dprintk(5, "%s() queue is empty\n", __func__); for (;;) { if (list_empty(&q->queued)) @@ -1286,7 +1221,7 @@ int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port, int size = port->ts_packet_size * port->ts_packet_count; int rc; - dprintk(1, "%s: %p\n", __FUNCTION__, buf); + dprintk(1, "%s: %p\n", __func__, buf); if (0 != buf->vb.baddr && buf->vb.bsize < size) return -EINVAL; @@ -1329,7 +1264,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) buf->count = cx88q->count++; mod_timer(&cx88q->timeout, jiffies + BUFFER_TIMEOUT); dprintk(1, "[%p/%d] %s - first active\n", - buf, buf->vb.i, __FUNCTION__); + buf, buf->vb.i, __func__); } else { dprintk( 1, "queue is not empty - append to active\n" ); prev = list_entry(cx88q->active.prev, struct cx23885_buffer, @@ -1340,7 +1275,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */ dprintk( 1, "[%p/%d] %s - append to active\n", - buf, buf->vb.i, __FUNCTION__); + buf, buf->vb.i, __func__); } } @@ -1371,13 +1306,23 @@ static void do_cancel_buffers(struct cx23885_tsport *port, char *reason, spin_unlock_irqrestore(&port->slock, flags); } +void cx23885_cancel_buffers(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_dmaqueue *q = &port->mpegq; + + dprintk(1, "%s()\n", __FUNCTION__); + del_timer_sync(&q->timeout); + cx23885_stop_dma(port); + do_cancel_buffers(port, "cancel", 0); +} static void cx23885_timeout(unsigned long data) { struct cx23885_tsport *port = (struct cx23885_tsport *)data; struct cx23885_dev *dev = port->dev; - dprintk(1, "%s()\n",__FUNCTION__); + dprintk(1, "%s()\n",__func__); if (debug > 5) cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]); @@ -1386,16 +1331,77 @@ static void cx23885_timeout(unsigned long data) do_cancel_buffers(port, "timeout", 1); } +int cx23885_irq_417(struct cx23885_dev *dev, u32 status) +{ + /* FIXME: port1 assumption here. */ + struct cx23885_tsport *port = &dev->ts1; + int count = 0; + int handled = 0; + + if (status == 0) + return handled; + + count = cx_read(port->reg_gpcnt); + dprintk(7, "status: 0x%08x mask: 0x%08x count: 0x%x\n", + status, cx_read(port->reg_ts_int_msk), count); + + if ((status & VID_B_MSK_BAD_PKT) || + (status & VID_B_MSK_OPC_ERR) || + (status & VID_B_MSK_VBI_OPC_ERR) || + (status & VID_B_MSK_SYNC) || + (status & VID_B_MSK_VBI_SYNC) || + (status & VID_B_MSK_OF) || + (status & VID_B_MSK_VBI_OF)) { + printk(KERN_ERR "%s: V4L mpeg risc op code error, status " + "= 0x%x\n", dev->name, status); + if (status & VID_B_MSK_BAD_PKT) + dprintk(1, " VID_B_MSK_BAD_PKT\n"); + if (status & VID_B_MSK_OPC_ERR) + dprintk(1, " VID_B_MSK_OPC_ERR\n"); + if (status & VID_B_MSK_VBI_OPC_ERR) + dprintk(1, " VID_B_MSK_VBI_OPC_ERR\n"); + if (status & VID_B_MSK_SYNC) + dprintk(1, " VID_B_MSK_SYNC\n"); + if (status & VID_B_MSK_VBI_SYNC) + dprintk(1, " VID_B_MSK_VBI_SYNC\n"); + if (status & VID_B_MSK_OF) + dprintk(1, " VID_B_MSK_OF\n"); + if (status & VID_B_MSK_VBI_OF) + dprintk(1, " VID_B_MSK_VBI_OF\n"); + + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + cx23885_417_check_encoder(dev); + } else if (status & VID_B_MSK_RISCI1) { + dprintk(7, " VID_B_MSK_RISCI1\n"); + spin_lock(&port->slock); + cx23885_wakeup(port, &port->mpegq, count); + spin_unlock(&port->slock); + } else if (status & VID_B_MSK_RISCI2) { + dprintk(7, " VID_B_MSK_RISCI2\n"); + spin_lock(&port->slock); + cx23885_restart_queue(port, &port->mpegq); + spin_unlock(&port->slock); + } + if (status) { + cx_write(port->reg_ts_int_stat, status); + handled = 1; + } + + return handled; +} + static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) { struct cx23885_dev *dev = port->dev; int handled = 0; u32 count; - if ( (status & VID_BC_MSK_OPC_ERR) || - (status & VID_BC_MSK_BAD_PKT) || - (status & VID_BC_MSK_SYNC) || - (status & VID_BC_MSK_OF)) + if ((status & VID_BC_MSK_OPC_ERR) || + (status & VID_BC_MSK_BAD_PKT) || + (status & VID_BC_MSK_SYNC) || + (status & VID_BC_MSK_OF)) { if (status & VID_BC_MSK_OPC_ERR) dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", VID_BC_MSK_OPC_ERR); @@ -1409,7 +1415,8 @@ static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); cx_clear(port->reg_dma_ctl, port->dma_ctl_val); - cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); } else if (status & VID_BC_MSK_RISCI1) { @@ -1510,11 +1517,17 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) if (ts1_status) { if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) handled += cx23885_irq_ts(ts1, ts1_status); + else + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + handled += cx23885_irq_417(dev, ts1_status); } if (ts2_status) { if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) handled += cx23885_irq_ts(ts2, ts2_status); + else + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) + handled += cx23885_irq_417(dev, ts2_status); } if (vida_status) @@ -1554,7 +1567,8 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev, printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " "latency: %d, mmio: 0x%llx\n", dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, - dev->pci_lat, (unsigned long long)pci_resource_start(pci_dev,0)); + dev->pci_lat, + (unsigned long long)pci_resource_start(pci_dev, 0)); pci_set_master(pci_dev); if (!pci_dma_supported(pci_dev, 0xffffffff)) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index ed465c007ce..022aa391937 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -36,9 +36,11 @@ #include "tda18271.h" #include "lgdt330x.h" #include "xc5000.h" -#include "dvb-pll.h" +#include "tda10048.h" #include "tuner-xc2028.h" -#include "tuner-xc2028-types.h" +#include "tuner-simple.h" +#include "dib7000p.h" +#include "dibx000_common.h" static unsigned int debug; @@ -53,6 +55,8 @@ static unsigned int alt_tuner; module_param(alt_tuner, int, 0644); MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* ------------------------------------------------------------------ */ static int dvb_buf_setup(struct videobuf_queue *q, @@ -104,6 +108,13 @@ static struct s5h1409_config hauppauge_generic_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; +static struct tda10048_config hauppauge_hvr1200_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON +}; + static struct s5h1409_config hauppauge_ezqam_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_SERIAL_OUTPUT, @@ -164,8 +175,10 @@ static struct tda829x_config tda829x_no_probe = { }; static struct tda18271_std_map hauppauge_tda18271_std_map = { - .atsc_6 = { .if_freq = 5380, .std_bits = 0x1b }, - .qam_6 = { .if_freq = 4000, .std_bits = 0x18 }, + .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, }; static struct tda18271_config hauppauge_tda18271_config = { @@ -173,6 +186,96 @@ static struct tda18271_config hauppauge_tda18271_config = { .gate = TDA18271_GATE_ANALOG, }; +static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .gate = TDA18271_GATE_ANALOG, +}; + +static struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, + * P_agc_nb_est=2, P_agc_write=0 + */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.000000 + * With external clock = 30.000000 */ +static struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, /* internal */ + 30000, /* sampling */ + 1, /* pll_cfg: prediv */ + 8, /* pll_cfg: ratio */ + 3, /* pll_cfg: range */ + 1, /* pll_cfg: reset */ + 0, /* pll_cfg: bypass */ + 0, /* misc: refdiv */ + 0, /* misc: bypclk_div */ + 1, /* misc: IO_CLK_en_core */ + 1, /* misc: ADClkSrc */ + 0, /* misc: modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000 /* xtal_hz */ +}; + +static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 0, + .update_lna = NULL, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + .agc_control = NULL, + .spur_protect = 0, + + .output_mode = OUTMODE_MPEG2_SERIAL, +}; + static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) { struct cx23885_tsport *port = ptr; @@ -182,7 +285,7 @@ static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) case XC2028_TUNER_RESET: /* Send the tuner in then out of reset */ /* GPIO-2 xc3028 tuner */ - dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __FUNCTION__, arg); + dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg); cx_set(GP0_IO, 0x00040000); cx_clear(GP0_IO, 0x00000004); @@ -192,10 +295,10 @@ static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) msleep(5); break; case XC2028_RESET_CLK: - dprintk(1, "%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg); + dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg); break; default: - dprintk(1, "%s: unknown command %d, arg %d\n", __FUNCTION__, + dprintk(1, "%s: unknown command %d, arg %d\n", __func__, command, arg); return -EINVAL; } @@ -271,8 +374,9 @@ static int dvb_register(struct cx23885_tsport *port) &fusionhdtv_5_express, &i2c_bus->i2c_adap); if (port->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, port->dvb.frontend, 0x61, - &i2c_bus->i2c_adap, DVB_PLL_LG_TDVS_H06XF); + dvb_attach(simple_tuner_attach, port->dvb.frontend, + &i2c_bus->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF); } break; case CX23885_BOARD_HAUPPAUGE_HVR1500Q: @@ -280,12 +384,10 @@ static int dvb_register(struct cx23885_tsport *port) port->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_hvr1500q_config, &dev->i2c_bus[0].i2c_adap); - if (port->dvb.frontend != NULL) { - hauppauge_hvr1500q_tunerconfig.priv = i2c_bus; + if (port->dvb.frontend != NULL) dvb_attach(xc5000_attach, port->dvb.frontend, &i2c_bus->i2c_adap, - &hauppauge_hvr1500q_tunerconfig); - } + &hauppauge_hvr1500q_tunerconfig, i2c_bus); break; case CX23885_BOARD_HAUPPAUGE_HVR1500: i2c_bus = &dev->i2c_bus[1]; @@ -297,13 +399,52 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, .i2c_addr = 0x61, - .video_dev = port, .callback = cx23885_hvr1500_xc3028_callback, }; static struct xc2028_ctrl ctl = { .fname = "xc3028-v27.fw", .max_len = 64, - .scode_table = OREN538, + .scode_table = XC3028_FE_OREN538, + }; + + fe = dvb_attach(xc2028_attach, + port->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + i2c_bus = &dev->i2c_bus[0]; + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1200_config, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, port->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, port->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1200_tuner_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + i2c_bus = &dev->i2c_bus[0]; + port->dvb.frontend = dvb_attach(dib7000p_attach, + &i2c_bus->i2c_adap, + 0x12, &hauppauge_hvr1400_dib7000_config); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x64, + .callback = cx23885_hvr1500_xc3028_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028L-v36.fw", + .max_len = 64, + .demod = 5000, + .d2633 = 1 }; fe = dvb_attach(xc2028_attach, @@ -330,7 +471,7 @@ static int dvb_register(struct cx23885_tsport *port) /* register everything */ return videobuf_dvb_register(&port->dvb, THIS_MODULE, port, - &dev->pci->dev); + &dev->pci->dev, adapter_nr); } int cx23885_dvb_register(struct cx23885_tsport *port) @@ -338,7 +479,7 @@ int cx23885_dvb_register(struct cx23885_tsport *port) struct cx23885_dev *dev = port->dev; int err; - dprintk(1, "%s\n", __FUNCTION__); + dprintk(1, "%s\n", __func__); dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", dev->board, dev->name, @@ -349,12 +490,12 @@ int cx23885_dvb_register(struct cx23885_tsport *port) /* dvb stuff */ printk("%s: cx23885 based dvb card\n", dev->name); - videobuf_queue_pci_init(&port->dvb.dvbq, &dvb_qops, dev->pci, &port->slock, + videobuf_queue_sg_init(&port->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx23885_buffer), port); err = dvb_register(port); if (err != 0) - printk("%s() dvb_register failed err = %d\n", __FUNCTION__, err); + printk("%s() dvb_register failed err = %d\n", __func__, err); return err; } diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index 92fe0bd37c8..c6bb0a05bc1 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -33,7 +33,7 @@ static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); -static unsigned int i2c_scan = 0; +static unsigned int i2c_scan; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); @@ -87,10 +87,10 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, int retval, cnt; if (joined_rlen) - dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __FUNCTION__, + dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__, msg->len, joined_rlen); else - dprintk(1, "%s(msg->len=%d)\n", __FUNCTION__, msg->len); + dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); /* Deal with i2c probe functions with zero payload */ if (msg->len == 0) { @@ -101,7 +101,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, if (!i2c_slave_did_ack(i2c_adap)) return -EIO; - dprintk(1, "%s() returns 0\n", __FUNCTION__); + dprintk(1, "%s() returns 0\n", __func__); return 0; } @@ -176,7 +176,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, if (i2c_debug && !joined) - dprintk(1, "%s(msg->len=%d)\n", __FUNCTION__, msg->len); + dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); /* Deal with i2c probe functions with zero payload */ if (msg->len == 0) { @@ -188,7 +188,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, return -EIO; - dprintk(1, "%s() returns 0\n", __FUNCTION__); + dprintk(1, "%s() returns 0\n", __func__); return 0; } @@ -238,11 +238,11 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap, struct cx23885_dev *dev = bus->dev; int i, retval = 0; - dprintk(1, "%s(num = %d)\n", __FUNCTION__, num); + dprintk(1, "%s(num = %d)\n", __func__, num); for (i = 0 ; i < num; i++) { dprintk(1, "%s(num = %d) addr = 0x%02x len = 0x%x\n", - __FUNCTION__, num, msgs[i].addr, msgs[i].len); + __func__, num, msgs[i].addr, msgs[i].len); if (msgs[i].flags & I2C_M_RD) { /* read */ retval = i2c_readbytes(i2c_adap, &msgs[i], 0); @@ -353,6 +353,8 @@ static struct i2c_client cx23885_i2c_client_template = { }; static char *i2c_devs[128] = { + [0x10 >> 1] = "tda10048", + [0x12 >> 1] = "dib7000pc", [ 0x1c >> 1 ] = "lgdt3303", [ 0x86 >> 1 ] = "tda9887", [ 0x32 >> 1 ] = "cx24227", @@ -360,7 +362,8 @@ static char *i2c_devs[128] = { [ 0x84 >> 1 ] = "tda8295", [ 0xa0 >> 1 ] = "eeprom", [ 0xc0 >> 1 ] = "tuner/mt2131/tda8275", - [ 0xc2 >> 1 ] = "tuner/mt2131/tda8275/xc5000", + [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028", + [0xc8 >> 1] = "tuner/xc3028L", }; static void do_i2c_scan(char *name, struct i2c_client *c) @@ -383,7 +386,7 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) { struct cx23885_dev *dev = bus->dev; - dprintk(1, "%s(bus = %d)\n", __FUNCTION__, bus->nr); + dprintk(1, "%s(bus = %d)\n", __func__, bus->nr); memcpy(&bus->i2c_adap, &cx23885_i2c_adap_template, sizeof(bus->i2c_adap)); @@ -420,6 +423,29 @@ int cx23885_i2c_unregister(struct cx23885_i2c *bus) return 0; } +void cx23885_av_clk(struct cx23885_dev *dev, int enable) +{ + /* write 0 to bus 2 addr 0x144 via i2x_xfer() */ + char buffer[3]; + struct i2c_msg msg; + dprintk(1, "%s(enabled = %d)\n", __func__, enable); + + /* Register 0x144 */ + buffer[0] = 0x01; + buffer[1] = 0x44; + if (enable == 1) + buffer[2] = 0x05; + else + buffer[2] = 0x00; + + msg.addr = 0x44; + msg.flags = I2C_M_TEN; + msg.len = 3; + msg.buf = buffer; + + i2c_xfer(&dev->i2c_bus[2].i2c_adap, &msg, 1); +} + /* ----------------------------------------------------------------------- */ /* diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index d3c4d2c5cbe..84652210a28 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -141,7 +141,7 @@ static struct cx23885_fmt *format_by_fourcc(unsigned int fourcc) if (formats[i].fourcc == fourcc) return formats+i; - printk(KERN_ERR "%s(0x%08x) NOT FOUND\n", __FUNCTION__, fourcc); + printk(KERN_ERR "%s(0x%08x) NOT FOUND\n", __func__, fourcc); return NULL; } @@ -292,13 +292,13 @@ void cx23885_video_wakeup(struct cx23885_dev *dev, } if (bc != 1) printk(KERN_ERR "%s: %d buffers handled (should be 1)\n", - __FUNCTION__, bc); + __func__, bc); } int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) { dprintk(1, "%s(norm = 0x%08x) name: [%s]\n", - __FUNCTION__, + __func__, (unsigned int)norm, v4l2_norm_to_name(norm)); @@ -319,7 +319,7 @@ struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, char *type) { struct video_device *vfd; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); vfd = video_device_alloc(); if (NULL == vfd) @@ -358,7 +358,7 @@ EXPORT_SYMBOL(cx23885_ctrl_query); static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh, unsigned int bit) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); if (fh->resources & bit) /* have it already allocated */ return 1; @@ -392,7 +392,7 @@ static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, unsigned int bits) { BUG_ON((fh->resources & bits) != bits); - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); mutex_lock(&dev->lock); fh->resources &= ~bits; @@ -407,7 +407,7 @@ int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) memset(&route, 0, sizeof(route)); dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n", - __FUNCTION__, + __func__, input, INPUT(input)->vmux, INPUT(input)->gpio0, INPUT(input)->gpio1, INPUT(input)->gpio2, INPUT(input)->gpio3); @@ -427,7 +427,7 @@ EXPORT_SYMBOL(cx23885_video_mux); int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width, unsigned int height, enum v4l2_field field) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); return 0; } @@ -435,7 +435,7 @@ static int cx23885_start_video_dma(struct cx23885_dev *dev, struct cx23885_dmaqueue *q, struct cx23885_buffer *buf) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); /* setup fifo + format */ cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], @@ -463,7 +463,7 @@ static int cx23885_restart_video_queue(struct cx23885_dev *dev, { struct cx23885_buffer *buf, *prev; struct list_head *item; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); if (!list_empty(&q->active)) { buf = list_entry(q->active.next, struct cx23885_buffer, @@ -579,13 +579,13 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, if (dev->tvnorm & V4L2_STD_NTSC) { /* cx25840 transmits NTSC bottom field first */ dprintk(1, "%s() Creating NTSC risc\n", - __FUNCTION__); + __func__); line0_offset = buf->bpl; line1_offset = 0; } else { /* All other formats are top field first */ dprintk(1, "%s() Creating PAL/SECAM risc\n", - __FUNCTION__); + __func__); line0_offset = 0; line1_offset = buf->bpl; } @@ -765,8 +765,8 @@ static int video_open(struct inode *inode, struct file *file) fh->height = 240; fh->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); - videobuf_queue_pci_init(&fh->vidq, &cx23885_video_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->vidq, &cx23885_video_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct cx23885_buffer), @@ -885,7 +885,7 @@ static int video_mmap(struct file *file, struct vm_area_struct *vma) int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl) { - dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __FUNCTION__); + dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__); cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl); return 0; } @@ -894,7 +894,7 @@ EXPORT_SYMBOL(cx23885_get_control); int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)" - " (disabled - no action)\n", __FUNCTION__); + " (disabled - no action)\n", __func__); return 0; } EXPORT_SYMBOL(cx23885_set_control); @@ -990,7 +990,7 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; int err; - dprintk(2, "%s()\n", __FUNCTION__); + dprintk(2, "%s()\n", __func__); err = vidioc_try_fmt_cap(file, priv, f); if (0 != err) @@ -999,7 +999,7 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, fh->width = f->fmt.pix.width; fh->height = f->fmt.pix.height; fh->vidq.field = f->fmt.pix.field; - dprintk(2, "%s() width=%d height=%d field=%d\n", __FUNCTION__, + dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width, fh->height, fh->vidq.field); cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_FMT, f); return 0; @@ -1101,7 +1101,7 @@ static int vidioc_streamon(struct file *file, void *priv, { struct cx23885_fh *fh = priv; struct cx23885_dev *dev = fh->dev; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) return -EINVAL; @@ -1118,7 +1118,7 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) struct cx23885_fh *fh = priv; struct cx23885_dev *dev = fh->dev; int err, res; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -1136,7 +1136,7 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *tvnorms) { struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); mutex_lock(&dev->lock); cx23885_set_tvnorm(dev, *tvnorms); @@ -1159,7 +1159,7 @@ int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) [CX23885_VMUX_DEBUG] = "for debug only", }; unsigned int n; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); n = i->index; if (n >= 4) @@ -1184,7 +1184,7 @@ static int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *i) { struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); return cx23885_enum_input(dev, i); } @@ -1193,7 +1193,7 @@ static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; *i = dev->input; - dprintk(1, "%s() returns %d\n", __FUNCTION__, *i); + dprintk(1, "%s() returns %d\n", __func__, *i); return 0; } @@ -1201,10 +1201,10 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) { struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; - dprintk(1, "%s(%d)\n", __FUNCTION__, i); + dprintk(1, "%s(%d)\n", __func__, i); if (i >= 4) { - dprintk(1, "%s() -EINVAL\n", __FUNCTION__); + dprintk(1, "%s() -EINVAL\n", __func__); return -EINVAL; } @@ -1389,7 +1389,7 @@ int cx23885_video_irq(struct cx23885_dev *dev, u32 status) return handled; cx_write(VID_A_INT_STAT, status); - dprintk(2, "%s() status = 0x%08x\n", __FUNCTION__, status); + dprintk(2, "%s() status = 0x%08x\n", __func__, status); /* risc op code error */ if (status & (1 << 16)) { printk(KERN_WARNING "%s/0: video risc op code error\n", @@ -1487,7 +1487,7 @@ static const struct file_operations radio_fops = { void cx23885_video_unregister(struct cx23885_dev *dev) { - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); cx_clear(PCI_INT_MSK, 1); if (dev->video_dev) { @@ -1505,7 +1505,7 @@ int cx23885_video_register(struct cx23885_dev *dev) { int err; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); spin_lock_init(&dev->slock); /* Initialize VBI template */ diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 7cb2179f262..32af87f25e7 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -32,6 +32,7 @@ #include "btcx-risc.h" #include "cx23885-reg.h" +#include "media/cx2341x.h" #include <linux/version.h> #include <linux/mutex.h> @@ -59,6 +60,9 @@ #define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4 #define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5 #define CX23885_BOARD_HAUPPAUGE_HVR1500 6 +#define CX23885_BOARD_HAUPPAUGE_HVR1200 7 +#define CX23885_BOARD_HAUPPAUGE_HVR1700 8 +#define CX23885_BOARD_HAUPPAUGE_HVR1400 9 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ @@ -154,6 +158,7 @@ typedef enum { CX23885_MPEG_UNDEFINED = 0, CX23885_MPEG_DVB, CX23885_ANALOG_VIDEO, + CX23885_MPEG_ENCODER, } port_t; struct cx23885_board { @@ -252,6 +257,8 @@ struct cx23885_tsport { u32 gen_ctrl_val; u32 ts_clk_en_val; u32 src_sel_val; + u32 vld_misc_val; + u32 hw_sop_ctrl_val; }; struct cx23885_dev { @@ -312,6 +319,14 @@ struct cx23885_dev { struct cx23885_dmaqueue vidq; struct cx23885_dmaqueue vbiq; spinlock_t slock; + + /* MPEG Encoder ONLY settings */ + u32 cx23417_mailbox; + struct cx2341x_mpeg_params mpeg_params; + struct video_device *v4l_device; + atomic_t v4l_reader_count; + struct cx23885_tvnorm encodernorm; + }; extern struct list_head cx23885_devlist; @@ -431,6 +446,18 @@ extern int cx23885_i2c_register(struct cx23885_i2c *bus); extern int cx23885_i2c_unregister(struct cx23885_i2c *bus); extern void cx23885_call_i2c_clients(struct cx23885_i2c *bus, unsigned int cmd, void *arg); +extern void cx23885_av_clk(struct cx23885_dev *dev, int enable); + +/* ----------------------------------------------------------- */ +/* cx23885-417.c */ +extern int cx23885_417_register(struct cx23885_dev *dev); +extern void cx23885_417_unregister(struct cx23885_dev *dev); +extern int cx23885_irq_417(struct cx23885_dev *dev, u32 status); +extern void cx23885_417_check_encoder(struct cx23885_dev *dev); +extern void cx23885_mc417_init(struct cx23885_dev *dev); +extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value); +extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value); + /* ----------------------------------------------------------- */ /* tv norms */ diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/video/cx25840/Kconfig index 7cf29a03ed6..448f4cd0ce3 100644 --- a/drivers/media/video/cx25840/Kconfig +++ b/drivers/media/video/cx25840/Kconfig @@ -1,6 +1,7 @@ config VIDEO_CX25840 tristate "Conexant CX2584x audio/video decoders" depends on VIDEO_V4L2 && I2C && EXPERIMENTAL + depends on HOTPLUG # due to FW_LOADER select FW_LOADER ---help--- Support for the Conexant CX2584x audio/video decoders. diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 756a1eeb274..1da6f134888 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -352,7 +352,7 @@ static void cx23885_initialize(struct i2c_client *client) static void input_change(struct i2c_client *client) { struct cx25840_state *state = i2c_get_clientdata(client); - v4l2_std_id std = cx25840_get_v4lstd(client); + v4l2_std_id std = state->std; /* Follow step 8c and 8d of section 3.16 in the cx25840 datasheet */ if (std & V4L2_STD_SECAM) { @@ -433,7 +433,7 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp int chroma = vid_input & 0xf00; if ((vid_input & ~0xff0) || - luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 || + luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 || chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { v4l_err(client, "0x%04x is not a valid video input!\n", vid_input); @@ -523,32 +523,34 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp /* ----------------------------------------------------------------------- */ -static int set_v4lstd(struct i2c_client *client, v4l2_std_id std) +static int set_v4lstd(struct i2c_client *client) { - u8 fmt=0; /* zero is autodetect */ + struct cx25840_state *state = i2c_get_clientdata(client); + u8 fmt = 0; /* zero is autodetect */ + u8 pal_m = 0; /* First tests should be against specific std */ - if (std == V4L2_STD_NTSC_M_JP) { - fmt=0x2; - } else if (std == V4L2_STD_NTSC_443) { - fmt=0x3; - } else if (std == V4L2_STD_PAL_M) { - fmt=0x5; - } else if (std == V4L2_STD_PAL_N) { - fmt=0x6; - } else if (std == V4L2_STD_PAL_Nc) { - fmt=0x7; - } else if (std == V4L2_STD_PAL_60) { - fmt=0x8; + if (state->std == V4L2_STD_NTSC_M_JP) { + fmt = 0x2; + } else if (state->std == V4L2_STD_NTSC_443) { + fmt = 0x3; + } else if (state->std == V4L2_STD_PAL_M) { + pal_m = 1; + fmt = 0x5; + } else if (state->std == V4L2_STD_PAL_N) { + fmt = 0x6; + } else if (state->std == V4L2_STD_PAL_Nc) { + fmt = 0x7; + } else if (state->std == V4L2_STD_PAL_60) { + fmt = 0x8; } else { /* Then, test against generic ones */ - if (std & V4L2_STD_NTSC) { - fmt=0x1; - } else if (std & V4L2_STD_PAL) { - fmt=0x4; - } else if (std & V4L2_STD_SECAM) { - fmt=0xc; - } + if (state->std & V4L2_STD_NTSC) + fmt = 0x1; + else if (state->std & V4L2_STD_PAL) + fmt = 0x4; + else if (state->std & V4L2_STD_SECAM) + fmt = 0xc; } v4l_dbg(1, cx25840_debug, client, "changing video std to fmt %i\n",fmt); @@ -563,42 +565,13 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std) cx25840_and_or(client, 0x47b, ~6, 0); } cx25840_and_or(client, 0x400, ~0xf, fmt); + cx25840_and_or(client, 0x403, ~0x3, pal_m); cx25840_vbi_setup(client); + if (!state->is_cx25836) + input_change(client); return 0; } -v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client) -{ - struct cx25840_state *state = i2c_get_clientdata(client); - /* check VID_FMT_SEL first */ - u8 fmt = cx25840_read(client, 0x400) & 0xf; - - if (!fmt) { - /* check AFD_FMT_STAT if set to autodetect */ - fmt = cx25840_read(client, 0x40d) & 0xf; - } - - switch (fmt) { - case 0x1: - { - /* if the audio std is A2-M, then this is the South Korean - NTSC standard */ - if (!state->is_cx25836 && cx25840_read(client, 0x805) == 2) - return V4L2_STD_NTSC_M_KR; - return V4L2_STD_NTSC_M; - } - case 0x2: return V4L2_STD_NTSC_M_JP; - case 0x3: return V4L2_STD_NTSC_443; - case 0x4: return V4L2_STD_PAL; - case 0x5: return V4L2_STD_PAL_M; - case 0x6: return V4L2_STD_PAL_N; - case 0x7: return V4L2_STD_PAL_Nc; - case 0x8: return V4L2_STD_PAL_60; - case 0xc: return V4L2_STD_SECAM; - default: return V4L2_STD_UNKNOWN; - } -} - /* ----------------------------------------------------------------------- */ static int set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) @@ -718,9 +691,10 @@ static int get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) static int set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) { + struct cx25840_state *state = i2c_get_clientdata(client); struct v4l2_pix_format *pix; int HSC, VSC, Vsrc, Hsrc, filter, Vlines; - int is_50Hz = !(cx25840_get_v4lstd(client) & V4L2_STD_525_60); + int is_50Hz = !(state->std & V4L2_STD_525_60); switch (fmt->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: @@ -1096,12 +1070,15 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, } case VIDIOC_G_STD: - *(v4l2_std_id *)arg = cx25840_get_v4lstd(client); + *(v4l2_std_id *)arg = state->std; break; case VIDIOC_S_STD: + if (state->radio == 0 && state->std == *(v4l2_std_id *)arg) + return 0; state->radio = 0; - return set_v4lstd(client, *(v4l2_std_id *)arg); + state->std = *(v4l2_std_id *)arg; + return set_v4lstd(client); case AUDC_SET_RADIO: state->radio = 1; @@ -1232,7 +1209,8 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, /* ----------------------------------------------------------------------- */ -static int cx25840_probe(struct i2c_client *client) +static int cx25840_probe(struct i2c_client *client, + const struct i2c_device_id *did) { struct cx25840_state *state; u32 id; @@ -1291,6 +1269,12 @@ static int cx25840_probe(struct i2c_client *client) state->id = id; state->rev = device_id; + if (state->is_cx23885) { + /* Drive GPIO2 direction and values */ + cx25840_write(client, 0x160, 0x1d); + cx25840_write(client, 0x164, 0x00); + } + return 0; } @@ -1300,10 +1284,17 @@ static int cx25840_remove(struct i2c_client *client) return 0; } +static const struct i2c_device_id cx25840_id[] = { + { "cx25840", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cx25840_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "cx25840", .driverid = I2C_DRIVERID_CX25840, .command = cx25840_command, .probe = cx25840_probe, .remove = cx25840_remove, + .id_table = cx25840_id, }; diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h index 95093edc918..8bf797f48b0 100644 --- a/drivers/media/video/cx25840/cx25840-core.h +++ b/drivers/media/video/cx25840/cx25840-core.h @@ -38,6 +38,7 @@ struct cx25840_state { struct i2c_client *c; int pvr150_workaround; int radio; + v4l2_std_id std; enum cx25840_video_input vid_input; enum cx25840_audio_input aud_input; u32 audclk_freq; @@ -60,7 +61,6 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value); u8 cx25840_read(struct i2c_client *client, u16 addr); u32 cx25840_read4(struct i2c_client *client, u16 addr); int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value); -v4l2_std_id cx25840_get_v4lstd(struct i2c_client *client); /* ----------------------------------------------------------------------- */ /* cx25850-firmware.c */ diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c index 1ddf724a2c7..620d295947a 100644 --- a/drivers/media/video/cx25840/cx25840-firmware.c +++ b/drivers/media/video/cx25840/cx25840-firmware.c @@ -79,11 +79,9 @@ static int check_fw_load(struct i2c_client *client, int size) return 0; } -static int fw_write(struct i2c_client *client, u8 * data, int size) +static int fw_write(struct i2c_client *client, u8 *data, int size) { - int sent; - - if ((sent = i2c_master_send(client, data, size)) < size) { + if (i2c_master_send(client, data, size) < size) { v4l_err(client, "firmware load i2c failure\n"); return -ENOSYS; } @@ -96,7 +94,7 @@ int cx25840_loadfw(struct i2c_client *client) struct cx25840_state *state = i2c_get_clientdata(client); const struct firmware *fw = NULL; u8 buffer[4], *ptr; - int size, send, retval; + int size, retval; if (state->is_cx23885) firmware = FWFILE_CX23885; @@ -124,8 +122,7 @@ int cx25840_loadfw(struct i2c_client *client) while (size > 0) { ptr[0] = 0x08; ptr[1] = 0x02; - send = size > (FWSEND - 2) ? FWSEND : size + 2; - retval = fw_write(client, ptr, send); + retval = fw_write(client, ptr, min(FWSEND, size + 2)); if (retval < 0) { release_firmware(fw); diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c index 6828f59b9d8..c754b9d1336 100644 --- a/drivers/media/video/cx25840/cx25840-vbi.c +++ b/drivers/media/video/cx25840/cx25840-vbi.c @@ -85,7 +85,7 @@ static int decode_vps(u8 * dst, u8 * p) void cx25840_vbi_setup(struct i2c_client *client) { struct cx25840_state *state = i2c_get_clientdata(client); - v4l2_std_id std = cx25840_get_v4lstd(client); + v4l2_std_id std = state->std; int hblank,hactive,burst,vblank,vactive,sc,vblank656,src_decimation; int luma_lpf,uv_lpf, comb; u32 pll_int,pll_frac,pll_post; @@ -242,7 +242,7 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ 0, 0, 0, 0 }; - int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_525_60); + int is_pal = !(state->std & V4L2_STD_525_60); int i; fmt = arg; @@ -279,7 +279,7 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOC_S_FMT: { - int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_525_60); + int is_pal = !(state->std & V4L2_STD_525_60); int vbi_offset = is_pal ? 1 : 0; int i, x; u8 lcr[24]; diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 49d3813a9b4..10e20d8196d 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -2,7 +2,6 @@ config VIDEO_CX88 tristate "Conexant 2388x (bt878 successor) support" depends on VIDEO_DEV && PCI && I2C && INPUT select I2C_ALGOBIT - select FW_LOADER select VIDEO_BTCX select VIDEOBUF_DMA_SG select VIDEO_TUNER @@ -34,8 +33,9 @@ config VIDEO_CX88_ALSA config VIDEO_CX88_BLACKBIRD tristate "Blackbird MPEG encoder support (cx2388x + cx23416)" - depends on VIDEO_CX88 + depends on VIDEO_CX88 && HOTPLUG select VIDEO_CX2341X + select FW_LOADER ---help--- This adds support for MPEG encoder cards based on the Blackbird reference design, using the Conexant 2388x @@ -57,6 +57,8 @@ config VIDEO_CX88_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select DVB_S5H1411 if !DVB_FE_CUSTOMISE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile index 532cee35eb3..6ec30f24257 100644 --- a/drivers/media/video/cx88/Makefile +++ b/drivers/media/video/cx88/Makefile @@ -10,5 +10,6 @@ obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 316b106c351..80c8883e54b 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -283,7 +283,7 @@ static int dsp_buffer_free(snd_cx88_card_t *chip) BUG_ON(!chip->dma_size); dprintk(2,"Freeing buffer\n"); - videobuf_pci_dma_unmap(chip->pci, chip->dma_risc); + videobuf_sg_dma_unmap(&chip->pci->dev, chip->dma_risc); videobuf_dma_free(chip->dma_risc); btcx_riscmem_free(chip->pci,&chip->buf->risc); kfree(chip->buf); @@ -332,6 +332,12 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; int err; + if (!chip) { + printk(KERN_ERR "BUG: cx88 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS); if (err < 0) goto _error; @@ -385,7 +391,7 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream, BUG_ON(!chip->dma_size); BUG_ON(chip->num_periods & (chip->num_periods-1)); - buf = videobuf_pci_alloc(sizeof(*buf)); + buf = videobuf_sg_alloc(sizeof(*buf)); if (NULL == buf) return -ENOMEM; @@ -396,14 +402,14 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream, buf->vb.height = chip->num_periods; buf->vb.size = chip->dma_size; - dma=videobuf_to_dma(&buf->vb); + dma = videobuf_to_dma(&buf->vb); videobuf_dma_init(dma); ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE, (PAGE_ALIGN(buf->vb.size) >> PAGE_SHIFT)); if (ret < 0) goto error; - ret = videobuf_pci_dma_map(chip->pci,dma); + ret = videobuf_sg_dma_map(&chip->pci->dev, dma); if (ret < 0) goto error; @@ -494,7 +500,7 @@ static snd_pcm_uframes_t snd_cx88_pointer(struct snd_pcm_substream *substream) count = atomic_read(&chip->count); -// dprintk(2, "%s - count %d (+%u), period %d, frame %lu\n", __FUNCTION__, +// dprintk(2, "%s - count %d (+%u), period %d, frame %lu\n", __func__, // count, new, count & (runtime->periods-1), // runtime->period_size * (count & (runtime->periods-1))); return runtime->period_size * (count & (runtime->periods-1)); @@ -690,10 +696,8 @@ MODULE_DEVICE_TABLE(pci, cx88_audio_pci_tbl); static int snd_cx88_free(snd_cx88_card_t *chip) { - if (chip->irq >= 0){ - synchronize_irq(chip->irq); + if (chip->irq >= 0) free_irq(chip->irq, chip); - } cx88_core_put(chip->core,chip->pci); diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index a99e9d5950a..6c0c94c5ef9 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -45,7 +45,7 @@ static unsigned int mpegbufs = 32; module_param(mpegbufs,int,0644); MODULE_PARM_DESC(mpegbufs,"number of mpeg buffers, range 2-32"); -static unsigned int debug = 0; +static unsigned int debug; module_param(debug,int,0644); MODULE_PARM_DESC(debug,"enable debug messages [blackbird]"); @@ -314,7 +314,7 @@ static int blackbird_mbox_func(void *priv, u32 command, int in, int out, u32 dat u32 value, flag, retval; int i; - dprintk(1,"%s: 0x%X\n", __FUNCTION__, command); + dprintk(1,"%s: 0x%X\n", __func__, command); /* this may not be 100% safe if we can't read any memory location without side effects */ @@ -546,10 +546,12 @@ static int blackbird_initialize_codec(struct cx8802_dev *dev) if (retval < 0) return retval; - dev->mailbox = blackbird_find_mailbox(dev); - if (dev->mailbox < 0) + retval = blackbird_find_mailbox(dev); + if (retval < 0) return -1; + dev->mailbox = retval; + retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ if (retval < 0) { dprintk(0, "ERROR: Firmware ping failed!\n"); @@ -693,7 +695,7 @@ static int blackbird_queryctrl(struct cx8802_dev *dev, struct v4l2_queryctrl *qc return -EINVAL; /* Standard V4L2 controls */ - if (cx8800_ctrl_query(qctrl) == 0) + if (cx8800_ctrl_query(dev->core, qctrl) == 0) return 0; /* MPEG V4L2 controls */ @@ -933,7 +935,7 @@ static int vidioc_queryctrl (struct file *file, void *priv, qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); if (unlikely(qctrl->id == 0)) return -EINVAL; - return cx8800_ctrl_query(qctrl); + return cx8800_ctrl_query(dev->core, qctrl); } static int vidioc_enum_input (struct file *file, void *priv, @@ -1055,7 +1057,7 @@ static int mpeg_open(struct inode *inode, struct file *file) dev = cx8802_get_device(inode); - dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, "%s\n", __func__); if (dev == NULL) return -ENODEV; @@ -1065,7 +1067,7 @@ static int mpeg_open(struct inode *inode, struct file *file) if (drv) { err = drv->request_acquire(drv); if(err != 0) { - dprintk(1,"%s: Unable to acquire hardware, %d\n", __FUNCTION__, err); + dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err); return err; } } @@ -1087,8 +1089,8 @@ static int mpeg_open(struct inode *inode, struct file *file) file->private_data = fh; fh->dev = dev; - videobuf_queue_pci_init(&fh->mpegq, &blackbird_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->mpegq, &blackbird_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct cx88_buffer), @@ -1284,7 +1286,7 @@ static int cx8802_blackbird_probe(struct cx8802_driver *drv) struct cx8802_dev *dev = core->dvbdev; int err; - dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", core->boardnr, core->name, diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 8c9a8adf52d..fa6d398e97b 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -44,9 +44,22 @@ static unsigned int latency = UNSET; module_param(latency,int,0444); MODULE_PARM_DESC(latency,"pci latency timer"); +#define info_printk(core, fmt, arg...) \ + printk(KERN_INFO "%s: " fmt, core->name , ## arg) + +#define warn_printk(core, fmt, arg...) \ + printk(KERN_WARNING "%s: " fmt, core->name , ## arg) + +#define err_printk(core, fmt, arg...) \ + printk(KERN_ERR "%s: " fmt, core->name , ## arg) + + /* ------------------------------------------------------------------ */ /* board config info */ +/* If radio_type !=UNSET, radio_addr should be specified + */ + static const struct cx88_board cx88_boards[] = { [CX88_BOARD_UNKNOWN] = { .name = "UNKNOWN/GENERIC", @@ -1354,6 +1367,10 @@ static const struct cx88_board cx88_boards[] = { }}, /* fixme: Add radio support */ .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xe780, + }, }, [CX88_BOARD_ADSTECH_PTV_390] = { .name = "ADS Tech Instant Video PCI", @@ -1401,6 +1418,252 @@ static const struct cx88_board cx88_boards[] = { }}, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO] = { + .name = "DViCO FusionHDTV 5 PCI nano", + /* xc3008 tuner, digital only for now */ + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x000027df, /* Unconfirmed */ + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000027df, /* Unconfirmed */ + .audioroute = 1, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000027df, /* Unconfirmed */ + .audioroute = 1, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PINNACLE_HYBRID_PCTV] = { + .name = "Pinnacle Hybrid PCTV", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x0ff, + }, + }, + [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = { + .name = "Winfast TV2000 XP Global", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */ + .gpio1 = 0x0000, + .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */ + + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */ + .gpio1 = 0x0000, + .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */ + + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x0ff, + }, + }, + [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { + .name = "PowerColor RA330", /* Long names may confuse LIRC. */ + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_DEBUG, + .vmux = 3, /* Due to the way the cx88 driver is written, */ + .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */ + .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */ + .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */ + }, { /* from the tuner on boot for a little while. */ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00ff, + .gpio1 = 0xf35d, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00ff, + .gpio1 = 0xf37d, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000ff, + .gpio1 = 0x0f37d, + .gpio3 = 0x00000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x000ff, + .gpio1 = 0x0f35d, + .gpio3 = 0x00000, + }, + }, + [CX88_BOARD_GENIATECH_X8000_MT] = { + /* Also PowerColor Real Angel 330 and Geniatech X800 OEM */ + .name = "Geniatech X8000-MT DVBT", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e341, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e361, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e361, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00000000, + .gpio1 = 0x00e3e341, + .gpio2 = 0x00000000, + .gpio3 = 0x00000000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = { + .name = "DViCO FusionHDTV DVB-T PRO", + .tuner_type = TUNER_ABSENT, /* XXX: Has XC3028 */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000067df, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000067df, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD] = { + .name = "DViCO FusionHDTV 7 Gold", + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x10df, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x16d9, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x16d9, + }}, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PROLINK_PV_8000GT] = { + .name = "Prolink Pixelview MPEG 8000GT", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0ff, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio2 = 0x0cfb, + } }, + .radio = { + .type = CX88_RADIO, + .gpio2 = 0x0cfb, + }, + }, + /* Both radio, analog and ATSC work with this board. + However, for analog to work, s5h1409 gate should be open, + otherwise, tuner-xc3028 won't be detected. + A proper fix require using the newer i2c methods to add + tuner-xc3028 without doing an i2c probe. + */ + [CX88_BOARD_KWORLD_ATSC_120] = { + .name = "Kworld PlusTV HD PCI 120 (ATSC 120)", + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f35d, + .gpio2 = 0x00000000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f37e, + .gpio2 = 0x00000000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f37e, + .gpio2 = 0x00000000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x000000ff, + .gpio1 = 0x0000f35d, + .gpio2 = 0x00000000, + }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -1605,7 +1868,11 @@ static const struct cx88_subid cx88_subids[] = { .subdevice = 0xdb11, .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS, /* Re-branded DViCO: UltraView DVB-T Plus */ - },{ + }, { + .subvendor = 0x18ac, + .subdevice = 0xdb30, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO, + }, { .subvendor = 0x17de, .subdevice = 0x0840, .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT, @@ -1714,6 +1981,38 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x11bd, .subdevice = 0x0051, .card = CX88_BOARD_PINNACLE_PCTV_HD_800i, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd530, + .card = CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO, + }, { + .subvendor = 0x12ab, + .subdevice = 0x1788, + .card = CX88_BOARD_PINNACLE_HYBRID_PCTV, + }, { + .subvendor = 0x14f1, + .subdevice = 0xea3d, + .card = CX88_BOARD_POWERCOLOR_REAL_ANGEL, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f18, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8852, + .card = CX88_BOARD_GENIATECH_X8000_MT, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd610, + .card = CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD, + }, { + .subvendor = 0x1554, + .subdevice = 0x4935, + .card = CX88_BOARD_PROLINK_PV_8000GT, + }, { + .subvendor = 0x17de, + .subdevice = 0x08c1, + .card = CX88_BOARD_KWORLD_ATSC_120, }, }; @@ -1731,17 +2030,16 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) if (eeprom_data[4] != 0x7d || eeprom_data[5] != 0x10 || eeprom_data[7] != 0x66) { - printk(KERN_WARNING "%s: Leadtek eeprom invalid.\n", - core->name); + warn_printk(core, "Leadtek eeprom invalid.\n"); return; } core->board.tuner_type = (eeprom_data[6] == 0x13) ? TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3; - printk(KERN_INFO "%s: Leadtek Winfast 2000XP Expert config: " - "tuner=%d, eeprom[0]=0x%02x\n", - core->name, core->board.tuner_type, eeprom_data[0]); + info_printk(core, "Leadtek Winfast 2000XP Expert config: " + "tuner=%d, eeprom[0]=0x%02x\n", + core->board.tuner_type, eeprom_data[0]); } static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) @@ -1785,13 +2083,12 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) /* known */ break; default: - printk("%s: warning: unknown hauppauge model #%d\n", - core->name, tv.model); + warn_printk(core, "warning: unknown hauppauge model #%d\n", + tv.model); break; } - printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", - core->name, tv.model); + info_printk(core, "hauppauge eeprom: model=%d\n", tv.model); } /* ----------------------------------------------------------------------- */ @@ -1837,8 +2134,7 @@ static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data) char *name = (eeprom_data[0x0d] < ARRAY_SIZE(gdi_tuner)) ? gdi_tuner[eeprom_data[0x0d]].name : NULL; - printk(KERN_INFO "%s: GDI: tuner=%s\n", core->name, - name ? name : "unknown"); + info_printk(core, "GDI: tuner=%s\n", name ? name : "unknown"); if (NULL == name) return; core->board.tuner_type = gdi_tuner[eeprom_data[0x0d]].id; @@ -1846,6 +2142,75 @@ static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data) CX88_RADIO : 0; } +/* ------------------------------------------------------------------- */ +/* some Divco specific stuff */ +static int cx88_dvico_xc2028_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + cx_write(MO_GP0_IO, 0x101000); + mdelay(5); + cx_set(MO_GP0_IO, 0x101010); + break; + default: + return -EINVAL; + } + + return 0; +} + + +/* ----------------------------------------------------------------------- */ +/* some Geniatech specific stuff */ + +static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core, + int command, int mode) +{ + switch (command) { + case XC2028_TUNER_RESET: + switch (INPUT(core->input).type) { + case CX88_RADIO: + break; + case CX88_VMUX_DVB: + cx_write(MO_GP1_IO, 0x030302); + mdelay(50); + break; + default: + cx_write(MO_GP1_IO, 0x030301); + mdelay(50); + } + cx_write(MO_GP1_IO, 0x101010); + mdelay(50); + cx_write(MO_GP1_IO, 0x101000); + mdelay(50); + cx_write(MO_GP1_IO, 0x101010); + mdelay(50); + return 0; + } + return -EINVAL; +} + +/* ------------------------------------------------------------------- */ +/* some Divco specific stuff */ +static int cx88_pv_8000gt_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + cx_write(MO_GP2_IO, 0xcf7); + mdelay(50); + cx_write(MO_GP2_IO, 0xef5); + mdelay(50); + cx_write(MO_GP2_IO, 0xcf7); + break; + default: + return -EINVAL; + } + + return 0; +} + /* ----------------------------------------------------------------------- */ /* some DViCO specific stuff */ @@ -1874,32 +2239,85 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core) msg.len = (i != 12 ? 5 : 2); err = i2c_transfer(&core->i2c_adap, &msg, 1); if (err != 1) { - printk("dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n", i, err); + warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d " + "failed (err = %d)!\n", i, err); return; } } } +static int cx88_xc2028_tuner_callback(struct cx88_core *core, + int command, int arg) +{ + /* Board-specific callbacks */ + switch (core->boardnr) { + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_POWERCOLOR_REAL_ANGEL: + case CX88_BOARD_GENIATECH_X8000_MT: + case CX88_BOARD_KWORLD_ATSC_120: + return cx88_xc3028_geniatech_tuner_callback(core, + command, arg); + case CX88_BOARD_PROLINK_PV_8000GT: + return cx88_pv_8000gt_callback(core, command, arg); + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + return cx88_dvico_xc2028_callback(core, command, arg); + } + + switch (command) { + case XC2028_TUNER_RESET: + switch (INPUT(core->input).type) { + case CX88_RADIO: + info_printk(core, "setting GPIO to radio!\n"); + cx_write(MO_GP0_IO, 0x4ff); + mdelay(250); + cx_write(MO_GP2_IO, 0xff); + mdelay(250); + break; + case CX88_VMUX_DVB: /* Digital TV*/ + default: /* Analog TV */ + info_printk(core, "setting GPIO to TV!\n"); + break; + } + cx_write(MO_GP1_IO, 0x101010); + mdelay(250); + cx_write(MO_GP1_IO, 0x101000); + mdelay(250); + cx_write(MO_GP1_IO, 0x101010); + mdelay(250); + return 0; + } + return -EINVAL; +} + /* ----------------------------------------------------------------------- */ /* Tuner callback function. Currently only needed for the Pinnacle * * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both * * analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c) */ -int cx88_tuner_callback(void *priv, int command, int arg) +static int cx88_xc5000_tuner_callback(struct cx88_core *core, + int command, int arg) { - struct i2c_algo_bit_data *i2c_algo = priv; - struct cx88_core *core = i2c_algo->data; - - switch(core->boardnr) { + switch (core->boardnr) { case CX88_BOARD_PINNACLE_PCTV_HD_800i: - if(command == 0) { /* This is the reset command from xc5000 */ + if (command == 0) { /* This is the reset command from xc5000 */ /* Reset XC5000 tuner via SYS_RSTO_pin */ cx_write(MO_SRST_IO, 0); msleep(10); cx_write(MO_SRST_IO, 1); return 0; + } else { + err_printk(core, "xc5000: unknown tuner " + "callback command.\n"); + return -EINVAL; } - else { + break; + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + if (command == 0) { /* This is the reset command from xc5000 */ + cx_clear(MO_GP0_IO, 0x00000010); + msleep(10); + cx_set(MO_GP0_IO, 0x00000010); + return 0; + } else { printk(KERN_ERR "xc5000: unknown tuner callback command.\n"); return -EINVAL; @@ -1908,6 +2326,36 @@ int cx88_tuner_callback(void *priv, int command, int arg) } return 0; /* Should never be here */ } + +int cx88_tuner_callback(void *priv, int command, int arg) +{ + struct i2c_algo_bit_data *i2c_algo = priv; + struct cx88_core *core; + + if (!i2c_algo) { + printk(KERN_ERR "cx88: Error - i2c private data undefined.\n"); + return -EINVAL; + } + + core = i2c_algo->data; + + if (!core) { + printk(KERN_ERR "cx88: Error - device struct undefined.\n"); + return -EINVAL; + } + + switch (core->board.tuner_type) { + case TUNER_XC2028: + info_printk(core, "Calling XC2028/3028 callback\n"); + return cx88_xc2028_tuner_callback(core, command, arg); + case TUNER_XC5000: + info_printk(core, "Calling XC5000 callback\n"); + return cx88_xc5000_tuner_callback(core, command, arg); + } + err_printk(core, "Error: Calling callback for tuner %d\n", + core->board.tuner_type); + return -EINVAL; +} EXPORT_SYMBOL(cx88_tuner_callback); /* ----------------------------------------------------------------------- */ @@ -1918,23 +2366,25 @@ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci) if (0 == pci->subsystem_vendor && 0 == pci->subsystem_device) { - printk("%s: Your board has no valid PCI Subsystem ID and thus can't\n" + printk(KERN_ERR + "%s: Your board has no valid PCI Subsystem ID and thus can't\n" "%s: be autodetected. Please pass card=<n> insmod option to\n" "%s: workaround that. Redirect complaints to the vendor of\n" "%s: the TV card. Best regards,\n" "%s: -- tux\n", core->name,core->name,core->name,core->name,core->name); } else { - printk("%s: Your board isn't known (yet) to the driver. You can\n" + printk(KERN_ERR + "%s: Your board isn't known (yet) to the driver. You can\n" "%s: try to pick one of the existing card configs via\n" "%s: card=<n> insmod option. Updating to the latest\n" "%s: version might help as well.\n", core->name,core->name,core->name,core->name); } - printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n", - core->name); + err_printk(core, "Here is a list of valid choices for the card=<n> " + "insmod option:\n"); for (i = 0; i < ARRAY_SIZE(cx88_boards); i++) - printk("%s: card=%d -> %s\n", + printk(KERN_ERR "%s: card=%d -> %s\n", core->name, i, cx88_boards[i].name); } @@ -1951,31 +2401,86 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ udelay(1000); break; + + case CX88_BOARD_PROLINK_PV_8000GT: + cx_write(MO_GP2_IO, 0xcf7); + mdelay(50); + cx_write(MO_GP2_IO, 0xef5); + mdelay(50); + cx_write(MO_GP2_IO, 0xcf7); + msleep(10); + break; + + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + /* Enable the xc5000 tuner */ + cx_set(MO_GP0_IO, 0x00001010); + break; + } +} + +/* + * Sets board-dependent xc3028 configuration + */ +void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) +{ + memset(ctl, 0, sizeof(*ctl)); + + ctl->fname = XC2028_DEFAULT_FIRMWARE; + ctl->max_len = 64; + + switch (core->boardnr) { + case CX88_BOARD_POWERCOLOR_REAL_ANGEL: + /* Now works with firmware version 2.7 */ + if (core->i2c_algo.udelay < 16) + core->i2c_algo.udelay = 16; + break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + ctl->scode_table = XC3028_FE_ZARLINK456; + break; + case CX88_BOARD_KWORLD_ATSC_120: + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + ctl->demod = XC3028_FE_OREN538; + break; + case CX88_BOARD_PROLINK_PV_8000GT: + /* + * This board uses non-MTS firmware + */ + break; + default: + ctl->demod = XC3028_FE_OREN538; + ctl->mts = 1; } } +EXPORT_SYMBOL_GPL(cx88_setup_xc3028); static void cx88_card_setup(struct cx88_core *core) { static u8 eeprom[256]; + struct tuner_setup tun_setup; + unsigned int mode_mask = T_RADIO | + T_ANALOG_TV | + T_DIGITAL_TV; + + memset(&tun_setup, 0, sizeof(tun_setup)); if (0 == core->i2c_rc) { core->i2c_client.addr = 0xa0 >> 1; - tveeprom_read(&core->i2c_client,eeprom,sizeof(eeprom)); + tveeprom_read(&core->i2c_client, eeprom, sizeof(eeprom)); } switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE: case CX88_BOARD_HAUPPAUGE_ROSLYN: if (0 == core->i2c_rc) - hauppauge_eeprom(core,eeprom+8); + hauppauge_eeprom(core, eeprom+8); break; case CX88_BOARD_GDI: if (0 == core->i2c_rc) - gdi_eeprom(core,eeprom); + gdi_eeprom(core, eeprom); break; case CX88_BOARD_WINFAST2000XP_EXPERT: if (0 == core->i2c_rc) - leadtek_eeprom(core,eeprom); + leadtek_eeprom(core, eeprom); break; case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: @@ -1985,12 +2490,19 @@ static void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_HAUPPAUGE_HVR1300: if (0 == core->i2c_rc) - hauppauge_eeprom(core,eeprom); + hauppauge_eeprom(core, eeprom); break; case CX88_BOARD_KWORLD_DVBS_100: cx_write(MO_GP0_IO, 0x000007f8); cx_write(MO_GP1_IO, 0x00000001); break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + /* GPIO0:0 is hooked to demod reset */ + /* GPIO0:4 is hooked to xc3028 reset */ + cx_write(MO_GP0_IO, 0x00111100); + msleep(1); + cx_write(MO_GP0_IO, 0x00111111); + break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: /* GPIO0:6 is hooked to FX2 reset pin */ cx_set(MO_GP0_IO, 0x00004040); @@ -2038,10 +2550,8 @@ static void cx88_card_setup(struct cx88_core *core) for (i = 0; i < ARRAY_SIZE(buffer); i++) if (2 != i2c_master_send(&core->i2c_client, buffer[i],2)) - printk(KERN_WARNING - "%s: Unable to enable " - "tuner(%i).\n", - core->name, i); + warn_printk(core, "Unable to enable " + "tuner(%i).\n", i); } break; case CX88_BOARD_MSI_TVANYWHERE_MASTER: @@ -2061,7 +2571,53 @@ static void cx88_card_setup(struct cx88_core *core) cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg); } + } /*end switch() */ + + + /* Setup tuners */ + if ((core->board.radio_type != UNSET)) { + tun_setup.mode_mask = T_RADIO; + tun_setup.type = core->board.radio_type; + tun_setup.addr = core->board.radio_addr; + tun_setup.tuner_callback = cx88_tuner_callback; + cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup); + mode_mask &= ~T_RADIO; } + + if (core->board.tuner_type != TUNER_ABSENT) { + tun_setup.mode_mask = mode_mask; + tun_setup.type = core->board.tuner_type; + tun_setup.addr = core->board.tuner_addr; + tun_setup.tuner_callback = cx88_tuner_callback; + + cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup); + } + + if (core->board.tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &core->board.tda9887_conf; + + cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tda9887_cfg); + } + + if (core->board.tuner_type == TUNER_XC2028) { + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; + + /* Fills device-dependent initialization parameters */ + cx88_setup_xc3028(core, &ctl); + + /* Sends parameters to xc2028/3028 tuner */ + memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); + xc2028_cfg.tuner = TUNER_XC2028; + xc2028_cfg.priv = &ctl; + info_printk(core, "Asking xc2028/3028 to load firmware %s\n", + ctl.fname); + cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &xc2028_cfg); + } + cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL); } /* ------------------------------------------------------------------ */ @@ -2178,9 +2734,8 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board)); - printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", - core->name,pci->subsystem_vendor, - pci->subsystem_device, core->board.name, + info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + pci->subsystem_vendor, pci->subsystem_device, core->board.name, core->boardnr, card[core->nr] == core->boardnr ? "insmod option" : "autodetected"); @@ -2189,8 +2744,8 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) if (radio[core->nr] != UNSET) core->board.radio_type = radio[core->nr]; - printk(KERN_INFO "%s: TV tuner type %d, Radio tuner type %d\n", - core->name, core->board.tuner_type, core->board.radio_type); + info_printk(core, "TV tuner type %d, Radio tuner type %d\n", + core->board.tuner_type, core->board.radio_type); /* init hardware */ cx88_reset(core); @@ -2201,18 +2756,8 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) if (TUNER_ABSENT != core->board.tuner_type) request_module("tuner"); - cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL); cx88_card_setup(core); cx88_ir_init(core, pci); return core; } - -/* ------------------------------------------------------------------ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index 01e2ac98970..60eeda3057e 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -47,15 +47,15 @@ MODULE_LICENSE("GPL"); /* ------------------------------------------------------------------ */ -static unsigned int core_debug = 0; +static unsigned int core_debug; module_param(core_debug,int,0644); MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); -static unsigned int nicam = 0; +static unsigned int nicam; module_param(nicam,int,0644); MODULE_PARM_DESC(nicam,"tv audio is nicam"); -static unsigned int nocomb = 0; +static unsigned int nocomb; module_param(nocomb,int,0644); MODULE_PARM_DESC(nocomb,"disable comb filter"); @@ -70,7 +70,7 @@ static DEFINE_MUTEX(devlist); /* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be generated _after_ lpi lines are transferred. */ -static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines, unsigned int lpi) @@ -130,7 +130,7 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int bpl, unsigned int padding, unsigned int lines) { u32 instructions,fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -168,7 +168,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int lines, unsigned int lpi) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -193,7 +193,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) @@ -219,7 +219,7 @@ cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf) videobuf_waiton(&buf->vb,0,0); videobuf_dma_unmap(q, dma); videobuf_dma_free(dma); - btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc); + btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); buf->vb.state = VIDEOBUF_NEEDS_INIT; } @@ -548,7 +548,7 @@ void cx88_wakeup(struct cx88_core *core, mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); } if (bc != 1) - printk("%s: %d buffers handled (should be 1)\n",__FUNCTION__,bc); + printk("%s: %d buffers handled (should be 1)\n",__func__,bc); } void cx88_shutdown(struct cx88_core *core) @@ -577,7 +577,7 @@ void cx88_shutdown(struct cx88_core *core) int cx88_reset(struct cx88_core *core) { - dprintk(1,"%s\n",__FUNCTION__); + dprintk(1,"%s\n",__func__); cx88_shutdown(core); /* clear irq status */ @@ -929,7 +929,10 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm) dprintk(1,"set_tvnorm: MO_INPUT_FORMAT 0x%08x [old=0x%08x]\n", cxiformat, cx_read(MO_INPUT_FORMAT) & 0x0f); - cx_andor(MO_INPUT_FORMAT, 0xf, cxiformat); + /* Chroma AGC must be disabled if SECAM is used, we enable it + by default on PAL and NTSC */ + cx_andor(MO_INPUT_FORMAT, 0x40f, + norm & V4L2_STD_SECAM ? cxiformat : cxiformat | 0x400); // FIXME: as-is from DScaler dprintk(1,"set_tvnorm: MO_OUTPUT_FORMAT 0x%08x [old=0x%08x]\n", diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index f7b41eb1bb5..d96173ff1db 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -45,16 +45,21 @@ #include "nxt200x.h" #include "cx24123.h" #include "isl6421.h" +#include "tuner-simple.h" +#include "tda9887.h" +#include "s5h1411.h" MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); -static unsigned int debug = 0; +static unsigned int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug,"enable debug messages [dvb]"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define dprintk(level,fmt, arg...) if (debug >= level) \ printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg) @@ -235,6 +240,19 @@ static struct zl10353_config dvico_fusionhdtv_hybrid = { .no_tuner = 1, }; +static struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, +}; + +static struct mt352_config dvico_fusionhdtv_mt352_xc3028 = { + .demod_address = 0x0f, + .if2 = 4560, + .no_tuner = 1, + .demod_init = dvico_fusionhdtv_demod_init, +}; + static struct zl10353_config dvico_fusionhdtv_plus_v1_1 = { .demod_address = 0x0f, }; @@ -266,7 +284,7 @@ static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index) struct cx8802_dev *dev= fe->dvb->priv; struct cx88_core *core = dev->core; - dprintk(1, "%s: index = %d\n", __FUNCTION__, index); + dprintk(1, "%s: index = %d\n", __func__, index); if (index == 0) cx_clear(MO_GP0_IO, 8); else @@ -357,6 +375,40 @@ static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe, return 0; } +static int cx88_pci_nano_callback(void *ptr, int command, int arg) +{ + struct cx88_core *core = ptr; + + switch (command) { + case XC2028_TUNER_RESET: + /* Send the tuner in then out of reset */ + dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg); + + switch (core->boardnr) { + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + /* GPIO-4 xc3028 tuner */ + + cx_set(MO_GP0_IO, 0x00001000); + cx_clear(MO_GP0_IO, 0x00000010); + msleep(100); + cx_set(MO_GP0_IO, 0x00000010); + msleep(100); + break; + } + + break; + case XC2028_RESET_CLK: + dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg); + break; + default: + dprintk(1, "%s: unknown command %d, arg %d\n", __func__, + command, arg); + return -EINVAL; + } + + return 0; +} + static struct cx24123_config geniatech_dvbs_config = { .demod_address = 0x55, .set_ts_params = cx24123_set_ts_param, @@ -383,28 +435,108 @@ static struct s5h1409_config pinnacle_pctv_hd_800i_config = { .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, }; +static struct s5h1409_config dvico_hdtv5_pci_nano_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1409_config kworld_atsc_120_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { .i2c_address = 0x64, .if_khz = 5380, .tuner_callback = cx88_tuner_callback, }; +static struct zl10353_config cx88_geniatech_x8000_mt = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, +}; + +static struct s5h1411_config dvico_fusionhdtv7_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +static struct xc5000_config dvico_fusionhdtv7_tuner_config = { + .i2c_address = 0xc2 >> 1, + .if_khz = 5380, + .tuner_callback = cx88_tuner_callback, +}; + +static int attach_xc3028(u8 addr, struct cx8802_dev *dev) +{ + struct dvb_frontend *fe; + struct xc2028_ctrl ctl; + struct xc2028_config cfg = { + .i2c_adap = &dev->core->i2c_adap, + .i2c_addr = addr, + .ctrl = &ctl, + .callback = cx88_tuner_callback, + }; + + if (!dev->dvb.frontend) { + printk(KERN_ERR "%s/2: dvb frontend not attached. " + "Can't attach xc3028\n", + dev->core->name); + return -EINVAL; + } + + /* + * Some xc3028 devices may be hidden by an I2C gate. This is known + * to happen with some s5h1409-based devices. + * Now that I2C gate is open, sets up xc3028 configuration + */ + cx88_setup_xc3028(dev->core, &ctl); + + fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc3028 attach failed\n", + dev->core->name); + return -EINVAL; + } + + printk(KERN_INFO "%s/2: xc3028 attached\n", + dev->core->name); + + return 0; +} + static int dvb_register(struct cx8802_dev *dev) { + struct cx88_core *core = dev->core; + /* init struct videobuf_dvb */ - dev->dvb.name = dev->core->name; + dev->dvb.name = core->name; dev->ts_gen_cntrl = 0x0c; /* init frontend */ - switch (dev->core->boardnr) { + switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE_DVB_T1: dev->dvb.frontend = dvb_attach(cx22702_attach, &connexant_refboard_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - DVB_PLL_THOMSON_DTT759X); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x61, &core->i2c_adap, + DVB_PLL_THOMSON_DTT759X)) + goto frontend_detach; } break; case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: @@ -413,11 +545,12 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_WINFAST_DTV1000: dev->dvb.frontend = dvb_attach(cx22702_attach, &connexant_refboard_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, - &dev->core->i2c_adap, - DVB_PLL_THOMSON_DTT7579); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x60, &core->i2c_adap, + DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; } break; case CX88_BOARD_WINFAST_DTV2000H: @@ -427,28 +560,32 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_HAUPPAUGE_HVR3000: dev->dvb.frontend = dvb_attach(cx22702_attach, &hauppauge_hvr_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, DVB_PLL_FMD1216ME); + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: dev->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, - NULL, DVB_PLL_THOMSON_DTT7579); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; break; } /* ZL10353 replaces MT352 on later cards */ dev->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_plus_v1_1, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, - NULL, DVB_PLL_THOMSON_DTT7579); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: @@ -456,28 +593,31 @@ static int dvb_register(struct cx8802_dev *dev) * compatible, with a slightly different MT352 AGC gain. */ dev->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv_dual, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - NULL, DVB_PLL_THOMSON_DTT7579); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; break; } /* ZL10353 replaces MT352 on later cards */ dev->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_plus_v1_1, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - NULL, DVB_PLL_THOMSON_DTT7579); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) + goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: dev->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - NULL, DVB_PLL_LG_Z201); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x61, NULL, DVB_PLL_LG_Z201)) + goto frontend_detach; } break; case CX88_BOARD_KWORLD_DVB_T: @@ -485,10 +625,11 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_ADSTECH_DVB_T_PCI: dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - NULL, DVB_PLL_UNKNOWN_1); + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + 0x61, NULL, DVB_PLL_UNKNOWN_1)) + goto frontend_detach; } break; case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: @@ -497,38 +638,59 @@ static int dvb_register(struct cx8802_dev *dev) dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, &dev->vp3054->adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, DVB_PLL_FMD1216ME); + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) + goto frontend_detach; } #else - printk(KERN_ERR "%s/2: built without vp3054 support\n", dev->core->name); + printk(KERN_ERR "%s/2: built without vp3054 support\n", + core->name); #endif break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: dev->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_hybrid, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - DVB_PLL_THOMSON_FE6600); + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_FE6600)) + goto frontend_detach; } break; + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + dev->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &core->i2c_adap); + if (dev->dvb.frontend == NULL) + dev->dvb.frontend = dvb_attach(mt352_attach, + &dvico_fusionhdtv_mt352_xc3028, + &core->i2c_adap); + /* + * On this board, the demod provides the I2C bus pullup. + * We must not permit gate_ctrl to be performed, or + * the xc3028 cannot communicate on the bus. + */ + if (dev->dvb.frontend) + dev->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + return -EINVAL; + break; case CX88_BOARD_PCHDTV_HD3000: dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - DVB_PLL_THOMSON_DTT761X); + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_DTT761X)) + goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q: dev->ts_gen_cntrl = 0x08; - { - /* Do a hardware reset of chip before using it. */ - struct cx88_core *core = dev->core; + /* Do a hardware reset of chip before using it. */ cx_clear(MO_GP0_IO, 1); mdelay(100); cx_set(MO_GP0_IO, 1); @@ -538,144 +700,218 @@ static int dvb_register(struct cx8802_dev *dev) fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set; dev->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - DVB_PLL_MICROTUNE_4042); - } + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_MICROTUNE_4042FI5)) + goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T: dev->ts_gen_cntrl = 0x08; - { - /* Do a hardware reset of chip before using it. */ - struct cx88_core *core = dev->core; + /* Do a hardware reset of chip before using it. */ cx_clear(MO_GP0_IO, 1); mdelay(100); cx_set(MO_GP0_IO, 9); mdelay(200); dev->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - DVB_PLL_THOMSON_DTT761X); - } + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_THOMSON_DTT761X)) + goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: dev->ts_gen_cntrl = 0x08; - { - /* Do a hardware reset of chip before using it. */ - struct cx88_core *core = dev->core; + /* Do a hardware reset of chip before using it. */ cx_clear(MO_GP0_IO, 1); mdelay(100); cx_set(MO_GP0_IO, 1); mdelay(200); dev->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_5_gold, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - DVB_PLL_LG_TDVS_H06XF); - } + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF)) + goto frontend_detach; + if (!dvb_attach(tda9887_attach, dev->dvb.frontend, + &core->i2c_adap, 0x43)) + goto frontend_detach; } break; case CX88_BOARD_PCHDTV_HD5500: dev->ts_gen_cntrl = 0x08; - { - /* Do a hardware reset of chip before using it. */ - struct cx88_core *core = dev->core; + /* Do a hardware reset of chip before using it. */ cx_clear(MO_GP0_IO, 1); mdelay(100); cx_set(MO_GP0_IO, 1); mdelay(200); dev->dvb.frontend = dvb_attach(lgdt330x_attach, &pchdtv_hd5500, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - DVB_PLL_LG_TDVS_H06XF); - } + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF)) + goto frontend_detach; + if (!dvb_attach(tda9887_attach, dev->dvb.frontend, + &core->i2c_adap, 0x43)) + goto frontend_detach; } break; case CX88_BOARD_ATI_HDTVWONDER: dev->dvb.frontend = dvb_attach(nxt200x_attach, &ati_hdtvwonder, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - NULL, DVB_PLL_TUV1236D); + if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &core->i2c_adap, 0x61, + TUNER_PHILIPS_TUV1236D)) + goto frontend_detach; } break; case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: dev->dvb.frontend = dvb_attach(cx24123_attach, &hauppauge_novas_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend) { - dvb_attach(isl6421_attach, dev->dvb.frontend, - &dev->core->i2c_adap, 0x08, 0x00, 0x00); + if (!dvb_attach(isl6421_attach, dev->dvb.frontend, + &core->i2c_adap, 0x08, 0x00, 0x00)) + goto frontend_detach; } break; case CX88_BOARD_KWORLD_DVBS_100: dev->dvb.frontend = dvb_attach(cx24123_attach, &kworld_dvbs_100_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend) { - dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; + core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; } break; case CX88_BOARD_GENIATECH_DVBS: dev->dvb.frontend = dvb_attach(cx24123_attach, &geniatech_dvbs_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend) { - dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; + core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; } break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: dev->dvb.frontend = dvb_attach(s5h1409_attach, &pinnacle_pctv_hd_800i_config, - &dev->core->i2c_adap); + &core->i2c_adap); if (dev->dvb.frontend != NULL) { /* tuner_config.video_dev must point to * i2c_adap.algo_data */ - pinnacle_pctv_hd_800i_tuner_config.priv = - dev->core->i2c_adap.algo_data; - dvb_attach(xc5000_attach, dev->dvb.frontend, - &dev->core->i2c_adap, - &pinnacle_pctv_hd_800i_tuner_config); + if (!dvb_attach(xc5000_attach, dev->dvb.frontend, + &core->i2c_adap, + &pinnacle_pctv_hd_800i_tuner_config, + core->i2c_adap.algo_data)) + goto frontend_detach; + } + break; + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + dev->dvb.frontend = dvb_attach(s5h1409_attach, + &dvico_hdtv5_pci_nano_config, + &core->i2c_adap); + if (dev->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &core->i2c_adap, + .i2c_addr = 0x61, + .callback = cx88_pci_nano_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028-v27.fw", + .max_len = 64, + .scode_table = XC3028_FE_OREN538, + }; + + fe = dvb_attach(xc2028_attach, + dev->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX88_BOARD_PINNACLE_HYBRID_PCTV: + dev->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_geniatech_x8000_mt, + &core->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_GENIATECH_X8000_MT: + dev->ts_gen_cntrl = 0x00; + + dev->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_geniatech_x8000_mt, + &core->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_KWORLD_ATSC_120: + dev->dvb.frontend = dvb_attach(s5h1409_attach, + &kworld_atsc_120_config, + &core->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + break; + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + dev->dvb.frontend = dvb_attach(s5h1411_attach, + &dvico_fusionhdtv7_config, + &core->i2c_adap); + if (dev->dvb.frontend != NULL) { + /* tuner_config.video_dev must point to + * i2c_adap.algo_data + */ + if (!dvb_attach(xc5000_attach, dev->dvb.frontend, + &core->i2c_adap, + &dvico_fusionhdtv7_tuner_config, + core->i2c_adap.algo_data)) + goto frontend_detach; } break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", - dev->core->name); + core->name); break; } if (NULL == dev->dvb.frontend) { - printk(KERN_ERR "%s/2: frontend initialization failed\n", dev->core->name); - return -1; + printk(KERN_ERR + "%s/2: frontend initialization failed\n", + core->name); + return -EINVAL; } /* Ensure all frontends negotiate bus access */ dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; /* Put the analog decoder in standby to keep it quiet */ - cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); + cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL); /* register everything */ - return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev); + return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr); + +frontend_detach: + if (dev->dvb.frontend) { + dvb_frontend_detach(dev->dvb.frontend); + dev->dvb.frontend = NULL; + } + return -EINVAL; } /* ----------------------------------------------------------- */ @@ -685,7 +921,7 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) { struct cx88_core *core = drv->core; int err = 0; - dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, "%s\n", __func__); switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE_HVR1300: @@ -708,7 +944,7 @@ static int cx8802_dvb_advise_release(struct cx8802_driver *drv) { struct cx88_core *core = drv->core; int err = 0; - dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, "%s\n", __func__); switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE_HVR1300: @@ -726,7 +962,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) struct cx8802_dev *dev = drv->core->dvbdev; int err; - dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", core->boardnr, core->name, @@ -744,8 +980,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) /* dvb stuff */ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); - videobuf_queue_pci_init(&dev->dvb.dvbq, &dvb_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&dev->dvb.dvbq, &dvb_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx88_buffer), @@ -764,7 +1000,8 @@ static int cx8802_dvb_remove(struct cx8802_driver *drv) struct cx8802_dev *dev = drv->core->dvbdev; /* dvb */ - videobuf_dvb_unregister(&dev->dvb); + if (dev->dvb.frontend) + videobuf_dvb_unregister(&dev->dvb); vp3054_i2c_remove(dev); diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index 566b26af523..cb6a096069c 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -35,11 +35,11 @@ #include "cx88.h" #include <media/v4l2-common.h> -static unsigned int i2c_debug = 0; +static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]"); -static unsigned int i2c_scan = 0; +static unsigned int i2c_scan; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); @@ -99,42 +99,11 @@ static int cx8800_bit_getsda(void *data) static int attach_inform(struct i2c_client *client) { - struct tuner_setup tun_setup; struct cx88_core *core = i2c_get_adapdata(client->adapter); dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", client->driver->driver.name, client->addr, client->name); - if (!client->driver->command) - return 0; - - if (core->board.radio_type != UNSET) { - if ((core->board.radio_addr==ADDR_UNSET)||(core->board.radio_addr==client->addr)) { - tun_setup.mode_mask = T_RADIO; - tun_setup.type = core->board.radio_type; - tun_setup.addr = core->board.radio_addr; - tun_setup.tuner_callback = cx88_tuner_callback; - client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup); - } - } - if (core->board.tuner_type != UNSET) { - if ((core->board.tuner_addr==ADDR_UNSET)||(core->board.tuner_addr==client->addr)) { - - tun_setup.mode_mask = T_ANALOG_TV; - tun_setup.type = core->board.tuner_type; - tun_setup.addr = core->board.tuner_addr; - tun_setup.tuner_callback = cx88_tuner_callback; - client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup); - } - } - - if (core->board.tda9887_conf) { - struct v4l2_priv_tun_config tda9887_cfg; - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &core->board.tda9887_conf; - - client->driver->command(client, TUNER_SET_CONFIG, &tda9887_cfg); - } return 0; } diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index bb0911b4d2f..53526d997a4 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -57,7 +57,7 @@ struct cx88_IR { u32 mask_keyup; }; -static int ir_debug = 0; +static int ir_debug; module_param(ir_debug, int, 0644); /* debug level [IR] */ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); @@ -258,6 +258,13 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->mask_keyup = 0x80; ir->polling = 1; /* ms */ break; + case CX88_BOARD_PROLINK_PV_8000GT: + ir_codes = ir_codes_pixelview_new; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0x3f; + ir->mask_keyup = 0x80; + ir->polling = 1; /* ms */ + break; case CX88_BOARD_KWORLD_LTV883: ir_codes = ir_codes_pixelview; ir->gpio_addr = MO_GP1_IO; @@ -310,6 +317,12 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir_type = IR_TYPE_RC5; ir->sampling = 1; break; + case CX88_BOARD_POWERCOLOR_REAL_ANGEL: + ir_codes = ir_codes_powercolor_real_angel; + ir->gpio_addr = MO_GP2_IO; + ir->mask_keycode = 0x7e; + ir->polling = 100; /* ms */ + break; } if (NULL == ir_codes) { diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index e357f415db0..a6b061c2644 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -39,7 +39,7 @@ MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); -static unsigned int debug = 0; +static unsigned int debug; module_param(debug,int,0644); MODULE_PARM_DESC(debug,"enable debug messages [mpeg]"); @@ -146,7 +146,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev, cx_write(TS_GEN_CNTRL, 0x06); /* punctured clock TS & posedge driven */ udelay(100); } else { - printk( "%s() Failed. Unsupported value in .mpeg (0x%08x)\n", __FUNCTION__, + printk( "%s() Failed. Unsupported value in .mpeg (0x%08x)\n", __func__, core->board.mpeg ); return -EINVAL; } @@ -247,7 +247,7 @@ int cx8802_buf_prepare(struct videobuf_queue *q, struct cx8802_dev *dev, struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); int rc; - dprintk(1, "%s: %p\n", __FUNCTION__, buf); + dprintk(1, "%s: %p\n", __func__, buf); if (0 != buf->vb.baddr && buf->vb.bsize < size) return -EINVAL; @@ -289,7 +289,7 @@ void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf) buf->count = cx88q->count++; mod_timer(&cx88q->timeout, jiffies+BUFFER_TIMEOUT); dprintk(1,"[%p/%d] %s - first active\n", - buf, buf->vb.i, __FUNCTION__); + buf, buf->vb.i, __func__); } else { dprintk( 1, "queue is not empty - append to active\n" ); @@ -299,7 +299,7 @@ void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf) buf->count = cx88q->count++; prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); dprintk( 1, "[%p/%d] %s - append to active\n", - buf, buf->vb.i, __FUNCTION__); + buf, buf->vb.i, __func__); } } @@ -342,7 +342,7 @@ static void cx8802_timeout(unsigned long data) { struct cx8802_dev *dev = (struct cx8802_dev*)data; - dprintk(1, "%s\n",__FUNCTION__); + dprintk(1, "%s\n",__func__); if (debug) cx88_sram_channel_dump(dev->core, &cx88_sram_channels[SRAM_CH28]); @@ -613,6 +613,8 @@ static int cx8802_request_acquire(struct cx8802_driver *drv) core->active_type_id != drv->type_id) return -EBUSY; + core->input = CX88_VMUX_DVB; + if (drv->advise_acquire) { mutex_lock(&drv->core->lock); @@ -623,7 +625,7 @@ static int cx8802_request_acquire(struct cx8802_driver *drv) } mutex_unlock(&drv->core->lock); - mpeg_dbg(1,"%s() Post acquire GPIO=%x\n", __FUNCTION__, cx_read(MO_GP0_IO)); + mpeg_dbg(1,"%s() Post acquire GPIO=%x\n", __func__, cx_read(MO_GP0_IO)); } return 0; @@ -639,7 +641,7 @@ static int cx8802_request_release(struct cx8802_driver *drv) { drv->advise_release(drv); core->active_type_id = CX88_BOARD_NONE; - mpeg_dbg(1,"%s() Post release GPIO=%x\n", __FUNCTION__, cx_read(MO_GP0_IO)); + mpeg_dbg(1,"%s() Post release GPIO=%x\n", __func__, cx_read(MO_GP0_IO)); } mutex_unlock(&drv->core->lock); @@ -813,7 +815,7 @@ static void __devexit cx8802_remove(struct pci_dev *pci_dev) dev = pci_get_drvdata(pci_dev); - dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, "%s\n", __func__); if (!list_empty(&dev->drvlist)) { struct cx8802_driver *drv, *tmp; diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index 76e5c78d8ae..3a1977f41e2 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -53,15 +53,15 @@ #include "cx88.h" -static unsigned int audio_debug = 0; +static unsigned int audio_debug; module_param(audio_debug, int, 0644); MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]"); -static unsigned int always_analog = 0; +static unsigned int always_analog; module_param(always_analog,int,0644); MODULE_PARM_DESC(always_analog,"force analog audio out"); -static unsigned int radio_deemphasis = 0; +static unsigned int radio_deemphasis; module_param(radio_deemphasis,int,0644); MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, " "0=None, 1=50us (elsewhere), 2=75us (USA)"); @@ -265,12 +265,12 @@ static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap, mode |= EN_FMRADIO_EN_RDS; if (sap) { - dprintk("%s SAP (status: unknown)\n", __FUNCTION__); + dprintk("%s SAP (status: unknown)\n", __func__); set_audio_start(core, SEL_SAP); set_audio_registers(core, btsc_sap); set_audio_finish(core, mode); } else { - dprintk("%s (status: known-good)\n", __FUNCTION__); + dprintk("%s (status: known-good)\n", __func__); set_audio_start(core, SEL_BTSC); set_audio_registers(core, btsc); set_audio_finish(core, mode); @@ -351,16 +351,16 @@ static void set_audio_standard_NICAM(struct cx88_core *core, u32 mode) set_audio_start(core,SEL_NICAM); switch (core->tvaudio) { case WW_L: - dprintk("%s SECAM-L NICAM (status: devel)\n", __FUNCTION__); + dprintk("%s SECAM-L NICAM (status: devel)\n", __func__); set_audio_registers(core, nicam_l); break; case WW_I: - dprintk("%s PAL-I NICAM (status: known-good)\n", __FUNCTION__); + dprintk("%s PAL-I NICAM (status: known-good)\n", __func__); set_audio_registers(core, nicam_bgdki_common); set_audio_registers(core, nicam_i); break; default: - dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __FUNCTION__); + dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __func__); set_audio_registers(core, nicam_bgdki_common); set_audio_registers(core, nicam_default); break; @@ -600,28 +600,28 @@ static void set_audio_standard_A2(struct cx88_core *core, u32 mode) set_audio_start(core, SEL_A2); switch (core->tvaudio) { case WW_BG: - dprintk("%s PAL-BG A1/2 (status: known-good)\n", __FUNCTION__); + dprintk("%s PAL-BG A1/2 (status: known-good)\n", __func__); set_audio_registers(core, a2_bgdk_common); set_audio_registers(core, a2_bg); set_audio_registers(core, a2_deemph50); break; case WW_DK: - dprintk("%s PAL-DK A1/2 (status: known-good)\n", __FUNCTION__); + dprintk("%s PAL-DK A1/2 (status: known-good)\n", __func__); set_audio_registers(core, a2_bgdk_common); set_audio_registers(core, a2_dk); set_audio_registers(core, a2_deemph50); break; case WW_I: - dprintk("%s PAL-I A1 (status: known-good)\n", __FUNCTION__); + dprintk("%s PAL-I A1 (status: known-good)\n", __func__); set_audio_registers(core, a1_i); set_audio_registers(core, a2_deemph50); break; case WW_L: - dprintk("%s AM-L (status: devel)\n", __FUNCTION__); + dprintk("%s AM-L (status: devel)\n", __func__); set_audio_registers(core, am_l); break; default: - dprintk("%s Warning: wrong value\n", __FUNCTION__); + dprintk("%s Warning: wrong value\n", __func__); return; break; }; @@ -637,7 +637,7 @@ static void set_audio_standard_EIAJ(struct cx88_core *core) { /* end of list */ }, }; - dprintk("%s (status: unknown)\n", __FUNCTION__); + dprintk("%s (status: unknown)\n", __func__); set_audio_start(core, SEL_EIAJ); set_audio_registers(core, eiaj); @@ -691,7 +691,7 @@ static void set_audio_standard_FM(struct cx88_core *core, { /* end of list */ }, }; - dprintk("%s (status: unknown)\n", __FUNCTION__); + dprintk("%s (status: unknown)\n", __func__); set_audio_start(core, SEL_FMRADIO); switch (deemph) { diff --git a/drivers/media/video/cx88/cx88-vbi.c b/drivers/media/video/cx88/cx88-vbi.c index d96ecfcf393..0943060682b 100644 --- a/drivers/media/video/cx88/cx88-vbi.c +++ b/drivers/media/video/cx88/cx88-vbi.c @@ -11,7 +11,7 @@ static unsigned int vbibufs = 4; module_param(vbibufs,int,0644); MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32"); -static unsigned int vbi_debug = 0; +static unsigned int vbi_debug; module_param(vbi_debug,int,0644); MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]"); diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 227179620d1..eea23f95edb 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -63,11 +63,11 @@ MODULE_PARM_DESC(video_nr,"video device numbers"); MODULE_PARM_DESC(vbi_nr,"vbi device numbers"); MODULE_PARM_DESC(radio_nr,"radio device numbers"); -static unsigned int video_debug = 0; +static unsigned int video_debug; module_param(video_debug,int,0644); MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); -static unsigned int irq_debug = 0; +static unsigned int irq_debug; module_param(irq_debug,int,0644); MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]"); @@ -228,6 +228,30 @@ static struct cx88_ctrl cx8800_ctls[] = { .mask = 0x00ff, .shift = 0, },{ + .v = { + .id = V4L2_CID_CHROMA_AGC, + .name = "Chroma AGC", + .minimum = 0, + .maximum = 1, + .default_value = 0x1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, + .reg = MO_INPUT_FORMAT, + .mask = 1 << 10, + .shift = 10, + }, { + .v = { + .id = V4L2_CID_COLOR_KILLER, + .name = "Color killer", + .minimum = 0, + .maximum = 1, + .default_value = 0x1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, + .reg = MO_INPUT_FORMAT, + .mask = 1 << 9, + .shift = 9, + }, { /* --- audio --- */ .v = { .id = V4L2_CID_AUDIO_MUTE, @@ -282,6 +306,8 @@ const u32 cx88_user_ctrls[] = { V4L2_CID_AUDIO_VOLUME, V4L2_CID_AUDIO_BALANCE, V4L2_CID_AUDIO_MUTE, + V4L2_CID_CHROMA_AGC, + V4L2_CID_COLOR_KILLER, 0 }; EXPORT_SYMBOL(cx88_user_ctrls); @@ -291,7 +317,7 @@ static const u32 *ctrl_classes[] = { NULL }; -int cx8800_ctrl_query(struct v4l2_queryctrl *qctrl) +int cx8800_ctrl_query(struct cx88_core *core, struct v4l2_queryctrl *qctrl) { int i; @@ -306,6 +332,11 @@ int cx8800_ctrl_query(struct v4l2_queryctrl *qctrl) return 0; } *qctrl = cx8800_ctls[i].v; + /* Report chroma AGC as inactive when SECAM is selected */ + if (cx8800_ctls[i].v.id == V4L2_CID_CHROMA_AGC && + core->tvnorm & V4L2_STD_SECAM) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; } EXPORT_SYMBOL(cx8800_ctrl_query); @@ -776,14 +807,14 @@ static int video_open(struct inode *inode, struct file *file) fh->height = 240; fh->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); - videobuf_queue_pci_init(&fh->vidq, &cx8800_video_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->vidq, &cx8800_video_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct cx88_buffer), fh); - videobuf_queue_pci_init(&fh->vbiq, &cx8800_vbi_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->vbiq, &cx8800_vbi_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, sizeof(struct cx88_buffer), @@ -976,6 +1007,12 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl) } mask=0xffff; break; + case V4L2_CID_CHROMA_AGC: + /* Do not allow chroma AGC to be enabled for SECAM */ + value = ((ctl->value - c->off) << c->shift) & c->mask; + if (core->tvnorm & V4L2_STD_SECAM && value) + return -EINVAL; + break; default: value = ((ctl->value - c->off) << c->shift) & c->mask; break; @@ -1268,10 +1305,12 @@ static int vidioc_s_input (struct file *file, void *priv, unsigned int i) static int vidioc_queryctrl (struct file *file, void *priv, struct v4l2_queryctrl *qctrl) { + struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core; + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); if (unlikely(qctrl->id == 0)) return -EINVAL; - return cx8800_ctrl_query(qctrl); + return cx8800_ctrl_query(core, qctrl); } static int vidioc_g_ctrl (struct file *file, void *priv, @@ -1832,8 +1871,11 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, switch (core->boardnr) { case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: - request_module("ir-kbd-i2c"); + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: request_module("rtc-isl1208"); + /* break intentionally omitted */ + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + request_module("ir-kbd-i2c"); } /* register v4l devices */ @@ -1917,6 +1959,9 @@ static void __devexit cx8800_finidev(struct pci_dev *pci_dev) core->kthread = NULL; } + if (core->ir) + cx88_ir_stop(core, core->ir); + cx88_shutdown(core); /* FIXME */ pci_disable_device(pci_dev); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 37e6d2e4002..14ac173f407 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -37,6 +37,7 @@ #include "btcx-risc.h" #include "cx88-reg.h" +#include "tuner-xc2028.h" #include <linux/version.h> #include <linux/mutex.h> @@ -211,6 +212,15 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_HAUPPAUGE_HVR1300 56 #define CX88_BOARD_ADSTECH_PTV_390 57 #define CX88_BOARD_PINNACLE_PCTV_HD_800i 58 +#define CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO 59 +#define CX88_BOARD_PINNACLE_HYBRID_PCTV 60 +#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL 61 +#define CX88_BOARD_POWERCOLOR_REAL_ANGEL 62 +#define CX88_BOARD_GENIATECH_X8000_MT 63 +#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO 64 +#define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65 +#define CX88_BOARD_PROLINK_PV_8000GT 66 +#define CX88_BOARD_KWORLD_ATSC_120 67 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, @@ -595,6 +605,7 @@ extern int cx88_tuner_callback(void *dev, int command, int arg); extern int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci); extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr); +extern void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl); /* ----------------------------------------------------------- */ /* cx88-tvaudio.c */ @@ -640,7 +651,8 @@ void cx8802_cancel_buffers(struct cx8802_dev *dev); /* ----------------------------------------------------------- */ /* cx88-video.c*/ extern const u32 cx88_user_ctrls[]; -extern int cx8800_ctrl_query(struct v4l2_queryctrl *qctrl); +extern int cx8800_ctrl_query(struct cx88_core *core, + struct v4l2_queryctrl *qctrl); int cx88_enum_input (struct cx88_core *core,struct v4l2_input *i); int cx88_set_freq (struct cx88_core *core,struct v4l2_frequency *f); int cx88_get_control(struct cx88_core *core, struct v4l2_control *ctl); diff --git a/drivers/media/video/dabfirmware.h b/drivers/media/video/dabfirmware.h index d14d803566a..cbd92635993 100644 --- a/drivers/media/video/dabfirmware.h +++ b/drivers/media/video/dabfirmware.h @@ -1,5 +1,12 @@ /* * dabdata.h - dab usb firmware and bitstream data + * + * Copyright (C) 1999 BayCom GmbH + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that redistributions of source + * code retain the above copyright notice and this comment without + * modification. */ static INTEL_HEX_RECORD firmware[] = { diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index a5731f90be0..8d1f8ee2a53 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -205,7 +205,7 @@ static void dabusb_iso_complete (struct urb *purb) /*-------------------------------------------------------------------*/ static int dabusb_alloc_buffers (pdabusb_t s) { - int buffers = 0; + int transfer_len = 0; pbuff_t b; unsigned int pipe = usb_rcvisocpipe (s->usbdev, _DABUSB_ISOPIPE); int pipesize = usb_maxpacket (s->usbdev, pipe, usb_pipeout (pipe)); @@ -216,7 +216,7 @@ static int dabusb_alloc_buffers (pdabusb_t s) dbg("dabusb_alloc_buffers pipesize:%d packets:%d transfer_buffer_len:%d", pipesize, packets, transfer_buffer_length); - while (buffers < (s->total_buffer_size << 10)) { + while (transfer_len < (s->total_buffer_size << 10)) { b = kzalloc(sizeof (buff_t), GFP_KERNEL); if (!b) { err("kzalloc(sizeof(buff_t))==NULL"); @@ -251,10 +251,10 @@ static int dabusb_alloc_buffers (pdabusb_t s) b->purb->iso_frame_desc[i].length = pipesize; } - buffers += transfer_buffer_length; + transfer_len += transfer_buffer_length; list_add_tail (&b->buff_list, &s->free_buff_list); } - s->got_mem = buffers; + s->got_mem = transfer_len; return 0; diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c index 566e479e262..88d6df71d05 100644 --- a/drivers/media/video/dpc7146.c +++ b/drivers/media/video/dpc7146.c @@ -54,11 +54,11 @@ #define DPC_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "debug verbosity"); -static int dpc_num = 0; +static int dpc_num; #define DPC_INPUTS 2 static struct v4l2_input dpc_inputs[DPC_INPUTS] = { @@ -131,7 +131,7 @@ static int dpc_probe(struct saa7146_dev* dev) device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients); /* check if all devices are present */ - if( 0 == dpc->saa7111a ) { + if (!dpc->saa7111a) { DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n")); i2c_del_adapter(&dpc->i2c_adapter); kfree(dpc); diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 0f7a0bd86ff..16a5af30e9d 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -1,11 +1,13 @@ config VIDEO_EM28XX - tristate "Empia EM2800/2820/2840 USB video capture support" + tristate "Empia EM28xx USB video capture support" depends on VIDEO_DEV && I2C && INPUT select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_IR + select VIDEOBUF_VMALLOC select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO ---help--- This is a video4linux driver for Empia 28xx based TV cards. @@ -27,3 +29,12 @@ config VIDEO_EM28XX_ALSA To compile this driver as a module, choose M here: the module will be called em28xx-alsa +config VIDEO_EM28XX_DVB + tristate "DVB/ATSC Support for em28xx based TV cards" + depends on VIDEO_EM28XX && DVB_CORE + select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select VIDEOBUF_DVB + ---help--- + This adds support for DVB cards based on the + Empiatech em28xx chips. diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile index 0924550992d..8137a8c94bf 100644 --- a/drivers/media/video/em28xx/Makefile +++ b/drivers/media/video/em28xx/Makefile @@ -5,8 +5,10 @@ em28xx-alsa-objs := em28xx-audio.o obj-$(CONFIG_VIDEO_EM28XX) += em28xx.o obj-$(CONFIG_VIDEO_EM28XX_ALSA) += em28xx-alsa.o +obj-$(CONFIG_VIDEO_EM28XX_DVB) += em28xx-dvb.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 8c67f678266..3c006103c1e 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -51,7 +51,7 @@ MODULE_PARM_DESC(debug, "activates debug info"); #define dprintk(fmt, arg...) do { \ if (debug) \ printk(KERN_INFO "em28xx-audio %s: " fmt, \ - __FUNCTION__, ##arg); \ + __func__, ##arg); \ } while (0) static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; @@ -268,6 +268,12 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) dprintk("opening device and trying to acquire exclusive lock\n"); + if (!dev) { + printk(KERN_ERR "BUG: em28xx can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + /* Sets volume, mute, etc */ dev->mute = 0; @@ -415,6 +421,12 @@ static int em28xx_audio_init(struct em28xx *dev) static int devnr; int ret, err; + if (dev->has_audio_class) { + /* This device does not support the extension (in this case + the device is expecting the snd-usb-audio module */ + return 0; + } + printk(KERN_INFO "em28xx-audio.c: probing for em28x1 " "non standard usbaudio\n"); printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus " @@ -458,6 +470,12 @@ static int em28xx_audio_fini(struct em28xx *dev) if (dev == NULL) return 0; + if (dev->has_audio_class) { + /* This device does not support the extension (in this case + the device is expecting the snd-usb-audio module */ + return 0; + } + if (dev->adev) { snd_card_free(dev->adev->sndcard); kfree(dev->adev); diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index aae7753fef1..8cbda43727c 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -36,7 +36,6 @@ #include <media/v4l2-common.h> #include "em28xx.h" -#include "tuner-xc2028.h" static int tuner = -1; module_param(tuner, int, 0444); @@ -52,26 +51,6 @@ struct em28xx_hash_table { unsigned int tuner; }; -/* Boards supported by driver */ - -#define EM2800_BOARD_UNKNOWN 0 -#define EM2820_BOARD_UNKNOWN 1 -#define EM2820_BOARD_TERRATEC_CINERGY_250 2 -#define EM2820_BOARD_PINNACLE_USB_2 3 -#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4 -#define EM2820_BOARD_MSI_VOX_USB_2 5 -#define EM2800_BOARD_TERRATEC_CINERGY_200 6 -#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 -#define EM2800_BOARD_KWORLD_USB2800 8 -#define EM2820_BOARD_PINNACLE_DVC_90 9 -#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10 -#define EM2880_BOARD_TERRATEC_HYBRID_XS 11 -#define EM2820_BOARD_KWORLD_PVRTV2800RF 12 -#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13 -#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14 -#define EM2800_BOARD_VGEAR_POCKETTV 15 -#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 16 - struct em28xx_board em28xx_boards[] = { [EM2800_BOARD_UNKNOWN] = { .name = "Unknown EM2800 video grabber", @@ -178,6 +157,7 @@ struct em28xx_board em28xx_boards[] = { .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .mts_firmware = 1, + .has_dvb = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -200,6 +180,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_type = TUNER_XC2028, .mts_firmware = 1, .has_12mhz_i2s = 1, + .has_dvb = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -214,9 +195,6 @@ struct em28xx_board em28xx_boards[] = { .vmux = TVP5150_SVIDEO, .amux = 1, } }, - - /* gpio's 4, 1, 0 */ - .analog_gpio = 0x003d2d, }, [EM2880_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Hybrid XS", @@ -331,7 +309,7 @@ struct em28xx_board em28xx_boards[] = { .name = "Kworld USB2800", .is_em2800 = 1, .vchannels = 3, - .tuner_type = TUNER_PHILIPS_ATSC, + .tuner_type = TUNER_PHILIPS_FCV1236D, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA7113, .input = { { @@ -443,7 +421,13 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, { USB_DEVICE(0x2040, 0x6502), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, - { USB_DEVICE(0x2040, 0x6513), + { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ + .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 }, + { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ + .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 }, + { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ + .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 }, + { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS }, @@ -453,7 +437,36 @@ struct usb_device_id em28xx_id_table [] = { }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); -/* EEPROM hash table for devices with generic USB IDs */ +/* + * Reset sequences for analog/digital modes + */ + +/* Board Hauppauge WinTV HVR 900 analog */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { + {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10}, + {0x05, 0xff, 0x10, 10}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 digital */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { + {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0x0f, 10}, + {EM2880_R04_GPO, 0x0c, 0x0f, 10}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 tuner_callback */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900_tuner_callback[] = { + {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, + {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10}, + {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +/* + * EEPROM hash table for devices with generic USB IDs + */ static struct em28xx_hash_table em28xx_eeprom_hash [] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, @@ -465,79 +478,116 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, }; +int em28xx_tuner_callback(void *ptr, int command, int arg) +{ + int rc = 0; + struct em28xx *dev = ptr; + + if (dev->tuner_type != TUNER_XC2028) + return 0; + + if (command != XC2028_TUNER_RESET) + return 0; + + if (dev->mode == EM28XX_ANALOG_MODE) + rc = em28xx_gpio_set(dev, dev->tun_analog_gpio); + else + rc = em28xx_gpio_set(dev, dev->tun_digital_gpio); + + return rc; +} +EXPORT_SYMBOL_GPL(em28xx_tuner_callback); + +static void em28xx_set_model(struct em28xx *dev) +{ + dev->is_em2800 = em28xx_boards[dev->model].is_em2800; + dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx; + dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; + dev->decoder = em28xx_boards[dev->model].decoder; + dev->video_inputs = em28xx_boards[dev->model].vchannels; + dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; + dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; + dev->has_dvb = em28xx_boards[dev->model].has_dvb; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ void em28xx_pre_card_setup(struct em28xx *dev) { + int rc; + + rc = em28xx_read_reg(dev, EM2880_R04_GPO); + if (rc >= 0) + dev->reg_gpo = rc; + + dev->wait_after_write = 5; + rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); + if (rc > 0) { + switch (rc) { + case CHIP_ID_EM2860: + em28xx_info("chip ID is em2860\n"); + break; + case CHIP_ID_EM2883: + em28xx_info("chip ID is em2882/em2883\n"); + dev->wait_after_write = 0; + break; + default: + em28xx_info("em28xx chip ID = %d\n", rc); + } + } + em28xx_set_model(dev); + /* request some modules */ switch (dev->model) { case EM2880_BOARD_TERRATEC_PRODIGY_XS: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_TERRATEC_HYBRID_XS: - em28xx_write_regs(dev, XCLK_REG, "\x27", 1); - em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1); - em28xx_write_regs(dev, 0x08, "\xff", 1); - em28xx_write_regs(dev, 0x04, "\x00", 1); - msleep(100); - em28xx_write_regs(dev, 0x04, "\x08", 1); - msleep(100); - em28xx_write_regs(dev, 0x08, "\xff", 1); - msleep(50); - em28xx_write_regs(dev, 0x08, "\x2d", 1); + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: + em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1); + em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); msleep(50); - em28xx_write_regs(dev, 0x08, "\x3d", 1); + + /* Sets GPO/GPIO sequences for this device */ + dev->analog_gpio = hauppauge_wintv_hvr_900_analog; + dev->digital_gpio = hauppauge_wintv_hvr_900_digital; + dev->tun_analog_gpio = hauppauge_wintv_hvr_900_tuner_callback; + dev->tun_digital_gpio = hauppauge_wintv_hvr_900_tuner_callback; + break; } + + em28xx_gpio_set(dev, dev->tun_analog_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); + + /* Unlock device */ + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); } -static int em28xx_tuner_callback(void *ptr, int command, int arg) +static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) { - int rc = 0; - struct em28xx *dev = ptr; + memset(ctl, 0, sizeof(*ctl)); - if (dev->tuner_type != TUNER_XC2028) - return 0; - - switch (command) { - case XC2028_TUNER_RESET: - { - /* GPIO and initialization codes for analog TV and radio - This code should be complemented for DTV, since reset - codes are different. - */ - - dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); - dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); - - if (dev->analog_gpio) { - char gpio0 = dev->analog_gpio & 0xff; - char gpio1 = (dev->analog_gpio >> 8) & 0xff; - char gpio4 = dev->analog_gpio >> 24; - - if (gpio4) { - dev->em28xx_write_regs(dev, 0x04, &gpio4, 1); - msleep(140); - } - - msleep(6); - dev->em28xx_write_regs(dev, 0x08, &gpio0, 1); - msleep(10); - dev->em28xx_write_regs(dev, 0x08, &gpio1, 1); - msleep(5); - } + ctl->fname = XC2028_DEFAULT_FIRMWARE; + ctl->max_len = 64; + ctl->mts = em28xx_boards[dev->model].mts_firmware; + switch (dev->model) { + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + ctl->demod = XC3028_FE_ZARLINK456; break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: + /* FIXME: Better to specify the needed IF */ + ctl->demod = XC3028_FE_DEFAULT; + break; + default: + ctl->demod = XC3028_FE_OREN538; } - } - return rc; } static void em28xx_config_tuner(struct em28xx *dev) { struct v4l2_priv_tun_config xc2028_cfg; - struct xc2028_ctrl ctl; struct tuner_setup tun_setup; struct v4l2_frequency f; @@ -552,11 +602,9 @@ static void em28xx_config_tuner(struct em28xx *dev) em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup); if (dev->tuner_type == TUNER_XC2028) { - memset(&ctl, 0, sizeof(ctl)); + struct xc2028_ctrl ctl; - ctl.fname = XC2028_DEFAULT_FIRMWARE; - ctl.max_len = 64; - ctl.mts = em28xx_boards[dev->model].mts_firmware; + em28xx_setup_xc3028(dev, &ctl); xc2028_cfg.tuner = TUNER_XC2028; xc2028_cfg.priv = &ctl; @@ -654,19 +702,6 @@ static int em28xx_hint_board(struct em28xx *dev) return -1; } - -static void em28xx_set_model(struct em28xx *dev) -{ - dev->is_em2800 = em28xx_boards[dev->model].is_em2800; - dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx; - dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; - dev->decoder = em28xx_boards[dev->model].decoder; - dev->video_inputs = em28xx_boards[dev->model].vchannels; - dev->analog_gpio = em28xx_boards[dev->model].analog_gpio; - dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; - dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; -} - /* ----------------------------------------------------------------------- */ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) { diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index c1caaa855b9..5d837c16ee2 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -31,104 +31,33 @@ /* #define ENABLE_DEBUG_ISOC_FRAMES */ -static unsigned int core_debug = 0; +static unsigned int core_debug; module_param(core_debug,int,0644); MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); #define em28xx_coredbg(fmt, arg...) do {\ if (core_debug) \ printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__ , ##arg); } while (0) + dev->name, __func__ , ##arg); } while (0) -static unsigned int reg_debug = 0; +static unsigned int reg_debug; module_param(reg_debug,int,0644); MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]"); #define em28xx_regdbg(fmt, arg...) do {\ if (reg_debug) \ printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__ , ##arg); } while (0) - -static unsigned int isoc_debug = 0; -module_param(isoc_debug,int,0644); -MODULE_PARM_DESC(isoc_debug,"enable debug messages [isoc transfers]"); - -#define em28xx_isocdbg(fmt, arg...) do {\ - if (isoc_debug) \ - printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__ , ##arg); } while (0) + dev->name, __func__ , ##arg); } while (0) static int alt = EM28XX_PINOUT; module_param(alt, int, 0644); MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint"); - -/* - * em28xx_request_buffers() - * allocate a number of buffers - */ -u32 em28xx_request_buffers(struct em28xx *dev, u32 count) -{ - const size_t imagesize = PAGE_ALIGN(dev->frame_size); /*needs to be page aligned cause the buffers can be mapped individually! */ - void *buff = NULL; - u32 i; - em28xx_coredbg("requested %i buffers with size %zi\n", - count, imagesize); - if (count > EM28XX_NUM_FRAMES) - count = EM28XX_NUM_FRAMES; - - dev->num_frames = count; - while (dev->num_frames > 0) { - if ((buff = vmalloc_32(dev->num_frames * imagesize))) { - memset(buff, 0, dev->num_frames * imagesize); - break; - } - dev->num_frames--; - } - - for (i = 0; i < dev->num_frames; i++) { - dev->frame[i].bufmem = buff + i * imagesize; - dev->frame[i].buf.index = i; - dev->frame[i].buf.m.offset = i * imagesize; - dev->frame[i].buf.length = dev->frame_size; - dev->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - dev->frame[i].buf.sequence = 0; - dev->frame[i].buf.field = V4L2_FIELD_NONE; - dev->frame[i].buf.memory = V4L2_MEMORY_MMAP; - dev->frame[i].buf.flags = 0; - } - return dev->num_frames; -} - -/* - * em28xx_queue_unusedframes() - * add all frames that are not currently in use to the inbuffer queue - */ -void em28xx_queue_unusedframes(struct em28xx *dev) -{ - unsigned long lock_flags; - u32 i; - - for (i = 0; i < dev->num_frames; i++) - if (dev->frame[i].state == F_UNUSED) { - dev->frame[i].state = F_QUEUED; - spin_lock_irqsave(&dev->queue_lock, lock_flags); - list_add_tail(&dev->frame[i].frame, &dev->inqueue); - spin_unlock_irqrestore(&dev->queue_lock, lock_flags); - } -} - -/* - * em28xx_release_buffers() - * free frame buffers - */ -void em28xx_release_buffers(struct em28xx *dev) -{ - if (dev->num_frames) { - vfree(dev->frame[0].bufmem); - dev->num_frames = 0; - } -} +/* FIXME */ +#define em28xx_isocdbg(fmt, arg...) do {\ + if (core_debug) \ + printk(KERN_INFO "%s %s :"fmt, \ + dev->name, __func__ , ##arg); } while (0) /* * em28xx_read_reg_req() @@ -148,11 +77,11 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, reg, buf, len, HZ); - if (reg_debug){ + if (reg_debug) { printk(ret < 0 ? " failed!\n" : "%02x values: ", ret); - for (byte = 0; byte < len; byte++) { + for (byte = 0; byte < len; byte++) printk(" %02x", (unsigned char)buf[byte]); - } + printk("\n"); } @@ -205,7 +134,10 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, unsigned char *bufs; if (dev->state & DEV_DISCONNECTED) - return(-ENODEV); + return -ENODEV; + + if (len < 1) + return -EINVAL; bufs = kmalloc(len, GFP_KERNEL); @@ -214,8 +146,8 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, if (reg_debug) { int i; for (i = 0; i < len; ++i) - printk (" %02x", (unsigned char)buf[i]); - printk ("\n"); + printk(" %02x", (unsigned char)buf[i]); + printk("\n"); } if (!bufs) @@ -224,14 +156,32 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, reg, bufs, len, HZ); - msleep(5); /* FIXME: magic number */ + if (dev->wait_after_write) + msleep(dev->wait_after_write); + kfree(bufs); return ret; } int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len) { - return em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len); + int rc; + + rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len); + + /* Stores GPO/GPIO values at the cache, if changed + Only write values should be stored, since input on a GPIO + register will return the input bits. + Not sure what happens on reading GPO register. + */ + if (rc >= 0) { + if (reg == EM2880_R04_GPO) + dev->reg_gpo = buf[0]; + else if (reg == EM28XX_R08_GPIO) + dev->reg_gpio = buf[0]; + } + + return rc; } /* @@ -244,9 +194,20 @@ static int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val, { int oldval; u8 newval; - if ((oldval = em28xx_read_reg(dev, reg)) < 0) + + /* Uses cache for gpo/gpio registers */ + if (reg == EM2880_R04_GPO) + oldval = dev->reg_gpo; + else if (reg == EM28XX_R08_GPIO) + oldval = dev->reg_gpio; + else + oldval = em28xx_read_reg(dev, reg); + + if (oldval < 0) return oldval; + newval = (((u8) oldval) & ~bitmask) | (val & bitmask); + return em28xx_write_regs(dev, reg, &newval, 1); } @@ -258,20 +219,26 @@ static int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 *val) { int ret, i; u8 addr = reg & 0x7f; - if ((ret = em28xx_write_regs(dev, AC97LSB_REG, val, 2)) < 0) + + ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, val, 2); + if (ret < 0) return ret; - if ((ret = em28xx_write_regs(dev, AC97ADDR_REG, &addr, 1)) < 0) + + ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1); + if (ret < 0) return ret; /* Wait up to 50 ms for AC97 command to complete */ for (i = 0; i < 10; i++) { - if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0) + ret = em28xx_read_reg(dev, EM28XX_R43_AC97BUSY); + if (ret < 0) return ret; + if (!(ret & 0x01)) return 0; msleep(5); } - em28xx_warn ("AC97 command still being executed: not handled properly!\n"); + em28xx_warn("AC97 command still being executed: not handled properly!\n"); return 0; } @@ -289,7 +256,7 @@ static int em28xx_set_audio_source(struct em28xx *dev) else input = EM2800_AUDIO_SRC_TUNER; - ret = em28xx_write_regs(dev, EM2800_AUDIOSRC_REG, &input, 1); + ret = em28xx_write_regs(dev, EM2800_R08_AUDIOSRC, &input, 1); if (ret < 0) return ret; } @@ -315,7 +282,7 @@ static int em28xx_set_audio_source(struct em28xx *dev) } } - ret = em28xx_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0); + ret = em28xx_write_reg_bits(dev, EM28XX_R0E_AUDIOSRC, input, 0xc0); if (ret < 0) return ret; msleep(5); @@ -323,11 +290,11 @@ static int em28xx_set_audio_source(struct em28xx *dev) /* Sets AC97 mixer registers This is seems to be needed, even for non-ac97 configs */ - ret = em28xx_write_ac97(dev, VIDEO_AC97, video); + ret = em28xx_write_ac97(dev, EM28XX_R14_VIDEO_AC97, video); if (ret < 0) return ret; - ret = em28xx_write_ac97(dev, LINE_IN_AC97, line); + ret = em28xx_write_ac97(dev, EM28XX_R10_LINE_IN_AC97, line); return ret; } @@ -343,7 +310,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) /* Mute */ s[1] |= 0x80; - ret = em28xx_write_ac97(dev, MASTER_AC97, s); + ret = em28xx_write_ac97(dev, EM28XX_R02_MASTER_AC97, s); if (ret < 0) return ret; @@ -354,7 +321,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) if (!dev->mute) xclk |= 0x80; - ret = em28xx_write_reg_bits(dev, XCLK_REG, xclk, 0xa7); + ret = em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, xclk, 0xa7); if (ret < 0) return ret; msleep(10); @@ -365,7 +332,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) /* Unmute device */ if (!dev->mute) s[1] &= ~0x80; - ret = em28xx_write_ac97(dev, MASTER_AC97, s); + ret = em28xx_write_ac97(dev, EM28XX_R02_MASTER_AC97, s); return ret; } @@ -373,50 +340,68 @@ EXPORT_SYMBOL_GPL(em28xx_audio_analog_set); int em28xx_colorlevels_set_default(struct em28xx *dev) { - em28xx_write_regs(dev, YGAIN_REG, "\x10", 1); /* contrast */ - em28xx_write_regs(dev, YOFFSET_REG, "\x00", 1); /* brightness */ - em28xx_write_regs(dev, UVGAIN_REG, "\x10", 1); /* saturation */ - em28xx_write_regs(dev, UOFFSET_REG, "\x00", 1); - em28xx_write_regs(dev, VOFFSET_REG, "\x00", 1); - em28xx_write_regs(dev, SHARPNESS_REG, "\x00", 1); - - em28xx_write_regs(dev, GAMMA_REG, "\x20", 1); - em28xx_write_regs(dev, RGAIN_REG, "\x20", 1); - em28xx_write_regs(dev, GGAIN_REG, "\x20", 1); - em28xx_write_regs(dev, BGAIN_REG, "\x20", 1); - em28xx_write_regs(dev, ROFFSET_REG, "\x00", 1); - em28xx_write_regs(dev, GOFFSET_REG, "\x00", 1); - return em28xx_write_regs(dev, BOFFSET_REG, "\x00", 1); + em28xx_write_regs(dev, EM28XX_R20_YGAIN, "\x10", 1); /* contrast */ + em28xx_write_regs(dev, EM28XX_R21_YOFFSET, "\x00", 1); /* brightness */ + em28xx_write_regs(dev, EM28XX_R22_UVGAIN, "\x10", 1); /* saturation */ + em28xx_write_regs(dev, EM28XX_R23_UOFFSET, "\x00", 1); + em28xx_write_regs(dev, EM28XX_R24_VOFFSET, "\x00", 1); + em28xx_write_regs(dev, EM28XX_R25_SHARPNESS, "\x00", 1); + + em28xx_write_regs(dev, EM28XX_R14_GAMMA, "\x20", 1); + em28xx_write_regs(dev, EM28XX_R15_RGAIN, "\x20", 1); + em28xx_write_regs(dev, EM28XX_R16_GGAIN, "\x20", 1); + em28xx_write_regs(dev, EM28XX_R17_BGAIN, "\x20", 1); + em28xx_write_regs(dev, EM28XX_R18_ROFFSET, "\x00", 1); + em28xx_write_regs(dev, EM28XX_R19_GOFFSET, "\x00", 1); + return em28xx_write_regs(dev, EM28XX_R1A_BOFFSET, "\x00", 1); } int em28xx_capture_start(struct em28xx *dev, int start) { - int ret; + int rc; /* FIXME: which is the best order? */ /* video registers are sampled by VREF */ - if ((ret = em28xx_write_reg_bits(dev, USBSUSP_REG, start ? 0x10 : 0x00, - 0x10)) < 0) - return ret; + rc = em28xx_write_reg_bits(dev, EM28XX_R0C_USBSUSP, + start ? 0x10 : 0x00, 0x10); + if (rc < 0) + return rc; + + if (!start) { + /* disable video capture */ + rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x27", 1); + return rc; + } + /* enable video capture */ - return em28xx_write_regs(dev, VINENABLE_REG, start ? "\x67" : "\x27", 1); + rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); + + if (dev->mode == EM28XX_ANALOG_MODE) + rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x67", 1); + else + rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x37", 1); + + msleep(6); + + return rc; } int em28xx_outfmt_set_yuv422(struct em28xx *dev) { - em28xx_write_regs(dev, OUTFMT_REG, "\x34", 1); - em28xx_write_regs(dev, VINMODE_REG, "\x10", 1); - return em28xx_write_regs(dev, VINCTRL_REG, "\x11", 1); + em28xx_write_regs(dev, EM28XX_R27_OUTFMT, "\x34", 1); + em28xx_write_regs(dev, EM28XX_R10_VINMODE, "\x10", 1); + return em28xx_write_regs(dev, EM28XX_R11_VINCTRL, "\x11", 1); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, u8 ymin, u8 ymax) { - em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n", xmin, ymin, xmax, ymax); + em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n", + xmin, ymin, xmax, ymax); - em28xx_write_regs(dev, XMIN_REG, &xmin, 1); - em28xx_write_regs(dev, XMAX_REG, &xmax, 1); - em28xx_write_regs(dev, YMIN_REG, &ymin, 1); - return em28xx_write_regs(dev, YMAX_REG, &ymax, 1); + em28xx_write_regs(dev, EM28XX_R28_XMIN, &xmin, 1); + em28xx_write_regs(dev, EM28XX_R29_XMAX, &xmax, 1); + em28xx_write_regs(dev, EM28XX_R2A_YMIN, &ymin, 1); + return em28xx_write_regs(dev, EM28XX_R2B_YMAX, &ymax, 1); } static int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart, @@ -426,34 +411,36 @@ static int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart, u8 cheight = height; u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01); - em28xx_coredbg("em28xx Area Set: (%d,%d)\n", (width | (overflow & 2) << 7), + em28xx_coredbg("em28xx Area Set: (%d,%d)\n", + (width | (overflow & 2) << 7), (height | (overflow & 1) << 8)); - em28xx_write_regs(dev, HSTART_REG, &hstart, 1); - em28xx_write_regs(dev, VSTART_REG, &vstart, 1); - em28xx_write_regs(dev, CWIDTH_REG, &cwidth, 1); - em28xx_write_regs(dev, CHEIGHT_REG, &cheight, 1); - return em28xx_write_regs(dev, OFLOW_REG, &overflow, 1); + em28xx_write_regs(dev, EM28XX_R1C_HSTART, &hstart, 1); + em28xx_write_regs(dev, EM28XX_R1D_VSTART, &vstart, 1); + em28xx_write_regs(dev, EM28XX_R1E_CWIDTH, &cwidth, 1); + em28xx_write_regs(dev, EM28XX_R1F_CHEIGHT, &cheight, 1); + return em28xx_write_regs(dev, EM28XX_R1B_OFLOW, &overflow, 1); } static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if(dev->is_em2800) + if (dev->is_em2800) mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); else { u8 buf[2]; buf[0] = h; buf[1] = h >> 8; - em28xx_write_regs(dev, HSCALELOW_REG, (char *)buf, 2); + em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); buf[0] = v; buf[1] = v >> 8; - em28xx_write_regs(dev, VSCALELOW_REG, (char *)buf, 2); - /* it seems that both H and V scalers must be active to work correctly */ + em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); + /* it seems that both H and V scalers must be active + to work correctly */ mode = (h || v)? 0x30: 0x00; } - return em28xx_write_reg_bits(dev, COMPR_REG, mode, 0x30); + return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30); } /* FIXME: this only function read values from dev */ @@ -469,376 +456,271 @@ int em28xx_resolution_set(struct em28xx *dev) return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } - -/******************* isoc transfer handling ****************************/ - -#ifdef ENABLE_DEBUG_ISOC_FRAMES -static void em28xx_isoc_dump(struct urb *urb) +int em28xx_set_alternate(struct em28xx *dev) { - int len = 0; - int ntrans = 0; + int errCode, prev_alt = dev->alt; int i; + unsigned int min_pkt_size = dev->width * 2 + 4; - printk(KERN_DEBUG "isocIrq: sf=%d np=%d ec=%x\n", - urb->start_frame, urb->number_of_packets, - urb->error_count); - for (i = 0; i < urb->number_of_packets; i++) { - unsigned char *buf = - urb->transfer_buffer + - urb->iso_frame_desc[i].offset; - int alen = urb->iso_frame_desc[i].actual_length; - if (alen > 0) { - if (buf[0] == 0x88) { - ntrans++; - len += alen; - } else if (buf[0] == 0x22) { - printk(KERN_DEBUG - "= l=%d nt=%d bpp=%d\n", - len - 4 * ntrans, ntrans, - ntrans == 0 ? 0 : len / ntrans); - ntrans = 1; - len = alen; - } else - printk(KERN_DEBUG "!\n"); + /* When image size is bigger than a certain value, + the frame size should be increased, otherwise, only + green screen will be received. + */ + if (dev->width * 2 * dev->height > 720 * 240 * 2) + min_pkt_size *= 2; + + for (i = 0; i < dev->num_alt; i++) { + /* stop when the selected alt setting offers enough bandwidth */ + if (dev->alt_max_pkt_size[i] >= min_pkt_size) { + dev->alt = i; + break; + /* otherwise make sure that we end up with the maximum bandwidth + because the min_pkt_size equation might be wrong... + */ + } else if (dev->alt_max_pkt_size[i] > + dev->alt_max_pkt_size[dev->alt]) + dev->alt = i; + } + + if (dev->alt != prev_alt) { + em28xx_coredbg("minimum isoc packet size: %u (alt=%d)\n", + min_pkt_size, dev->alt); + dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt]; + em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n", + dev->alt, dev->max_pkt_size); + errCode = usb_set_interface(dev->udev, 0, dev->alt); + if (errCode < 0) { + em28xx_errdev("cannot change alternate number to %d (error=%i)\n", + dev->alt, errCode); + return errCode; } - printk(KERN_DEBUG " n=%d s=%d al=%d %x\n", i, - urb->iso_frame_desc[i].status, - urb->iso_frame_desc[i].actual_length, - (unsigned int) - *((unsigned char *)(urb->transfer_buffer + - urb->iso_frame_desc[i]. - offset))); } + return 0; } -#endif -static inline int em28xx_isoc_video(struct em28xx *dev,struct em28xx_frame_t **f, - unsigned long *lock_flags, unsigned char buf) +int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio) { - if (!(buf & 0x01)) { - if ((*f)->state == F_GRABBING) { - /*previous frame is incomplete */ - if ((*f)->fieldbytesused < dev->field_size) { - (*f)->state = F_ERROR; - em28xx_isocdbg ("dropping incomplete bottom field (%i missing bytes)", - dev->field_size-(*f)->fieldbytesused); - } else { - (*f)->state = F_DONE; - (*f)->buf.bytesused = dev->frame_size; - } - } - if ((*f)->state == F_DONE || (*f)->state == F_ERROR) { - /* move current frame to outqueue and get next free buffer from inqueue */ - spin_lock_irqsave(&dev-> queue_lock, *lock_flags); - list_move_tail(&(*f)->frame, &dev->outqueue); - if (!list_empty(&dev->inqueue)) - (*f) = list_entry(dev-> inqueue.next, - struct em28xx_frame_t,frame); - else - (*f) = NULL; - spin_unlock_irqrestore(&dev->queue_lock,*lock_flags); - } - if (!(*f)) { - em28xx_isocdbg ("new frame but no buffer is free"); - return -1; - } - do_gettimeofday(&(*f)->buf.timestamp); - (*f)->buf.sequence = ++dev->frame_count; - (*f)->buf.field = V4L2_FIELD_INTERLACED; - (*f)->state = F_GRABBING; - (*f)->buf.bytesused = 0; - (*f)->top_field = 1; - (*f)->fieldbytesused = 0; - } else { - /* acquiring bottom field */ - if ((*f)->state == F_GRABBING) { - if (!(*f)->top_field) { - (*f)->state = F_ERROR; - em28xx_isocdbg ("unexpected begin of bottom field; discarding it"); - } else if ((*f)-> fieldbytesused < dev->field_size - 172) { - (*f)->state = F_ERROR; - em28xx_isocdbg ("dropping incomplete top field (%i missing bytes)", - dev->field_size-(*f)->fieldbytesused); - } else { - (*f)->top_field = 0; - (*f)->fieldbytesused = 0; - } + int rc = 0; + + if (!gpio) + return rc; + + dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); + if (dev->mode == EM28XX_ANALOG_MODE) + dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); + else + dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1); + msleep(6); + + /* Send GPIO reset sequences specified at board entry */ + while (gpio->sleep >= 0) { + if (gpio->reg >= 0) { + rc = em28xx_write_reg_bits(dev, + gpio->reg, + gpio->val, + gpio->mask); + if (rc < 0) + return rc; } + if (gpio->sleep > 0) + msleep(gpio->sleep); + + gpio++; } - return (0); + return rc; } -static inline void em28xx_isoc_video_copy(struct em28xx *dev, - struct em28xx_frame_t **f, unsigned char *buf, int len) +int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode) { - void *fieldstart, *startwrite, *startread; - int linesdone, currlinedone, offset, lencopy,remain; + if (dev->mode == set_mode) + return 0; - if(dev->frame_size != (*f)->buf.length){ - em28xx_err("frame_size %i and buf.length %i are different!!!\n",dev->frame_size,(*f)->buf.length); - return; + if (set_mode == EM28XX_MODE_UNDEFINED) { + dev->mode = set_mode; + return 0; } - if ((*f)->fieldbytesused + len > dev->field_size) - len =dev->field_size - (*f)->fieldbytesused; - - if (buf[0] != 0x88 && buf[0] != 0x22) { - em28xx_isocdbg("frame is not complete\n"); - startread = buf; - len+=4; - } else - startread = buf + 4; - - remain = len; + dev->mode = set_mode; - if ((*f)->top_field) - fieldstart = (*f)->bufmem; + if (dev->mode == EM28XX_DIGITAL_MODE) + return em28xx_gpio_set(dev, dev->digital_gpio); else - fieldstart = (*f)->bufmem + dev->bytesperline; - - linesdone = (*f)->fieldbytesused / dev->bytesperline; - currlinedone = (*f)->fieldbytesused % dev->bytesperline; - offset = linesdone * dev->bytesperline * 2 + currlinedone; - startwrite = fieldstart + offset; - lencopy = dev->bytesperline - currlinedone; - lencopy = lencopy > remain ? remain : lencopy; - - memcpy(startwrite, startread, lencopy); - remain -= lencopy; - - while (remain > 0) { - startwrite += lencopy + dev->bytesperline; - startread += lencopy; - if (dev->bytesperline > remain) - lencopy = remain; - else - lencopy = dev->bytesperline; - - memcpy(startwrite, startread, lencopy); - remain -= lencopy; - } - - (*f)->fieldbytesused += len; + return em28xx_gpio_set(dev, dev->analog_gpio); } +EXPORT_SYMBOL_GPL(em28xx_set_mode); + +/* ------------------------------------------------------------------ + URB control + ------------------------------------------------------------------*/ /* - * em28xx_isoIrq() - * handles the incoming isoc urbs and fills the frames from our inqueue + * IRQ callback, called by URB callback */ -static void em28xx_isocIrq(struct urb *urb) +static void em28xx_irq_callback(struct urb *urb) { - struct em28xx *dev = urb->context; - int i, status; - struct em28xx_frame_t **f; - unsigned long lock_flags; - - if (!dev) - return; -#ifdef ENABLE_DEBUG_ISOC_FRAMES - if (isoc_debug>1) - em28xx_isoc_dump(urb); -#endif - - if (urb->status == -ENOENT) - return; - - f = &dev->frame_current; - - if (dev->stream == STREAM_INTERRUPT) { - dev->stream = STREAM_OFF; - if ((*f)) - (*f)->state = F_QUEUED; - em28xx_isocdbg("stream interrupted"); - wake_up_interruptible(&dev->wait_stream); - } - - if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED)) - return; - - if (dev->stream == STREAM_ON && !list_empty(&dev->inqueue)) { - if (!(*f)) - (*f) = list_entry(dev->inqueue.next, - struct em28xx_frame_t, frame); - - for (i = 0; i < urb->number_of_packets; i++) { - unsigned char *buf = urb->transfer_buffer + - urb->iso_frame_desc[i].offset; - int len = urb->iso_frame_desc[i].actual_length - 4; - - if (urb->iso_frame_desc[i].status) { - em28xx_isocdbg("data error: [%d] len=%d, status=%d", i, - urb->iso_frame_desc[i].actual_length, - urb->iso_frame_desc[i].status); - if (urb->iso_frame_desc[i].status != -EPROTO) - continue; - } - if (urb->iso_frame_desc[i].actual_length <= 0) { - em28xx_isocdbg("packet %d is empty",i); - continue; - } - if (urb->iso_frame_desc[i].actual_length > - urb->iso_frame_desc[i].length) { - em28xx_isocdbg("packet bigger than packet size"); - continue; - } - /*new frame */ - if (buf[0] == 0x22 && buf[1] == 0x5a) { - em28xx_isocdbg("Video frame, length=%i!",len); - - if (em28xx_isoc_video(dev,f,&lock_flags,buf[2])) - break; - } else if (buf[0]==0x33 && buf[1]==0x95 && buf[2]==0x00) { - em28xx_isocdbg("VBI HEADER!!!"); - } + struct em28xx_dmaqueue *dma_q = urb->context; + struct em28xx *dev = container_of(dma_q, struct em28xx, vidq); + int rc, i; - /* actual copying */ - if ((*f)->state == F_GRABBING) { - em28xx_isoc_video_copy(dev,f,buf, len); - } - } - } + /* Copy data from URB */ + spin_lock(&dev->slock); + rc = dev->isoc_ctl.isoc_copy(dev, urb); + spin_unlock(&dev->slock); + /* Reset urb buffers */ for (i = 0; i < urb->number_of_packets; i++) { urb->iso_frame_desc[i].status = 0; urb->iso_frame_desc[i].actual_length = 0; } - urb->status = 0; - if ((status = usb_submit_urb(urb, GFP_ATOMIC))) { - em28xx_errdev("resubmit of urb failed (error=%i)\n", status); - dev->state |= DEV_MISCONFIGURED; + + urb->status = usb_submit_urb(urb, GFP_ATOMIC); + if (urb->status) { + em28xx_isocdbg("urb resubmit failed (error=%i)\n", + urb->status); } - wake_up_interruptible(&dev->wait_frame); - return; } /* - * em28xx_uninit_isoc() - * deallocates the buffers and urbs allocated during em28xx_init_iosc() + * Stop and Deallocate URBs */ void em28xx_uninit_isoc(struct em28xx *dev) { + struct urb *urb; int i; - for (i = 0; i < EM28XX_NUM_BUFS; i++) { - if (dev->urb[i]) { - usb_kill_urb(dev->urb[i]); - if (dev->transfer_buffer[i]) { + em28xx_isocdbg("em28xx: called em28xx_uninit_isoc\n"); + + dev->isoc_ctl.nfields = -1; + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb = dev->isoc_ctl.urb[i]; + if (urb) { + usb_kill_urb(urb); + usb_unlink_urb(urb); + if (dev->isoc_ctl.transfer_buffer[i]) { usb_buffer_free(dev->udev, - dev->urb[i]->transfer_buffer_length, - dev->transfer_buffer[i], - dev->urb[i]->transfer_dma); + urb->transfer_buffer_length, + dev->isoc_ctl.transfer_buffer[i], + urb->transfer_dma); } - usb_free_urb(dev->urb[i]); + usb_free_urb(urb); + dev->isoc_ctl.urb[i] = NULL; } - dev->urb[i] = NULL; - dev->transfer_buffer[i] = NULL; + dev->isoc_ctl.transfer_buffer[i] = NULL; } + + kfree(dev->isoc_ctl.urb); + kfree(dev->isoc_ctl.transfer_buffer); + + dev->isoc_ctl.urb = NULL; + dev->isoc_ctl.transfer_buffer = NULL; + dev->isoc_ctl.num_bufs = 0; + em28xx_capture_start(dev, 0); } +EXPORT_SYMBOL_GPL(em28xx_uninit_isoc); /* - * em28xx_init_isoc() - * allocates transfer buffers and submits the urbs for isoc transfer + * Allocate URBs and start IRQ */ -int em28xx_init_isoc(struct em28xx *dev) +int em28xx_init_isoc(struct em28xx *dev, int max_packets, + int num_bufs, int max_pkt_size, + int (*isoc_copy) (struct em28xx *dev, struct urb *urb)) { - /* change interface to 3 which allows the biggest packet sizes */ - int i, errCode; - int sb_size; - - em28xx_set_alternate(dev); - sb_size = EM28XX_NUM_PACKETS * dev->max_pkt_size; - - /* reset streaming vars */ - dev->frame_current = NULL; - dev->frame_count = 0; - - /* allocate urbs */ - for (i = 0; i < EM28XX_NUM_BUFS; i++) { - struct urb *urb; - int j; - /* allocate transfer buffer */ - urb = usb_alloc_urb(EM28XX_NUM_PACKETS, GFP_KERNEL); - if (!urb){ - em28xx_errdev("cannot alloc urb %i\n", i); + struct em28xx_dmaqueue *dma_q = &dev->vidq; + int i; + int sb_size, pipe; + struct urb *urb; + int j, k; + int rc; + + em28xx_isocdbg("em28xx: called em28xx_prepare_isoc\n"); + + /* De-allocates all pending stuff */ + em28xx_uninit_isoc(dev); + + dev->isoc_ctl.isoc_copy = isoc_copy; + dev->isoc_ctl.num_bufs = num_bufs; + + dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); + if (!dev->isoc_ctl.urb) { + em28xx_errdev("cannot alloc memory for usb buffers\n"); + return -ENOMEM; + } + + dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, + GFP_KERNEL); + if (!dev->isoc_ctl.transfer_buffer) { + em28xx_errdev("cannot allocate memory for usbtransfer\n"); + kfree(dev->isoc_ctl.urb); + return -ENOMEM; + } + + dev->isoc_ctl.max_pkt_size = max_pkt_size; + dev->isoc_ctl.buf = NULL; + + sb_size = max_packets * dev->isoc_ctl.max_pkt_size; + + /* allocate urbs and transfer buffers */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb = usb_alloc_urb(max_packets, GFP_KERNEL); + if (!urb) { + em28xx_err("cannot alloc isoc_ctl.urb %i\n", i); em28xx_uninit_isoc(dev); return -ENOMEM; } - dev->transfer_buffer[i] = usb_buffer_alloc(dev->udev, sb_size, - GFP_KERNEL, - &urb->transfer_dma); - if (!dev->transfer_buffer[i]) { - em28xx_errdev - ("unable to allocate %i bytes for transfer buffer %i\n", - sb_size, i); + dev->isoc_ctl.urb[i] = urb; + + dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->udev, + sb_size, GFP_KERNEL, &urb->transfer_dma); + if (!dev->isoc_ctl.transfer_buffer[i]) { + em28xx_err("unable to allocate %i bytes for transfer" + " buffer %i%s\n", + sb_size, i, + in_interrupt()?" while in int":""); em28xx_uninit_isoc(dev); - usb_free_urb(urb); return -ENOMEM; } - memset(dev->transfer_buffer[i], 0, sb_size); - urb->dev = dev->udev; - urb->context = dev; - urb->pipe = usb_rcvisocpipe(dev->udev, 0x82); - urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; - urb->interval = 1; - urb->transfer_buffer = dev->transfer_buffer[i]; - urb->complete = em28xx_isocIrq; - urb->number_of_packets = EM28XX_NUM_PACKETS; - urb->transfer_buffer_length = sb_size; - for (j = 0; j < EM28XX_NUM_PACKETS; j++) { - urb->iso_frame_desc[j].offset = j * dev->max_pkt_size; - urb->iso_frame_desc[j].length = dev->max_pkt_size; + memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); + + /* FIXME: this is a hack - should be + 'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK' + should also be using 'desc.bInterval' + */ + pipe = usb_rcvisocpipe(dev->udev, + dev->mode == EM28XX_ANALOG_MODE ? 0x82 : 0x84); + + usb_fill_int_urb(urb, dev->udev, pipe, + dev->isoc_ctl.transfer_buffer[i], sb_size, + em28xx_irq_callback, dma_q, 1); + + urb->number_of_packets = max_packets; + urb->transfer_flags = URB_ISO_ASAP; + + k = 0; + for (j = 0; j < max_packets; j++) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = + dev->isoc_ctl.max_pkt_size; + k += dev->isoc_ctl.max_pkt_size; } - dev->urb[i] = urb; } - /* submit urbs */ - em28xx_coredbg("Submitting %d urbs of %d packets (%d each)\n", - EM28XX_NUM_BUFS, EM28XX_NUM_PACKETS, dev->max_pkt_size); - for (i = 0; i < EM28XX_NUM_BUFS; i++) { - errCode = usb_submit_urb(dev->urb[i], GFP_KERNEL); - if (errCode) { - em28xx_errdev("submit of urb %i failed (error=%i)\n", i, - errCode); - em28xx_uninit_isoc(dev); - return errCode; - } - } - - return 0; -} - -int em28xx_set_alternate(struct em28xx *dev) -{ - int errCode, prev_alt = dev->alt; - int i; - unsigned int min_pkt_size = dev->bytesperline+4; - - /* When image size is bigger than a ceirtain value, - the frame size should be increased, otherwise, only - green screen will be received. - */ - if (dev->frame_size > 720*240*2) - min_pkt_size *= 2; + init_waitqueue_head(&dma_q->wq); - for (i = 0; i < dev->num_alt; i++) - if (dev->alt_max_pkt_size[i] >= min_pkt_size) - break; - dev->alt = i; + em28xx_capture_start(dev, 1); - if (dev->alt != prev_alt) { - em28xx_coredbg("minimum isoc packet size: %u (alt=%d)\n", - min_pkt_size, dev->alt); - dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt]; - em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n", - dev->alt, dev->max_pkt_size); - errCode = usb_set_interface(dev->udev, 0, dev->alt); - if (errCode < 0) { - em28xx_errdev ("cannot change alternate number to %d (error=%i)\n", - dev->alt, errCode); - return errCode; + /* submit urbs and enables IRQ */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); + if (rc) { + em28xx_err("submit of urb %i failed (error=%i)\n", i, + rc); + em28xx_uninit_isoc(dev); + return rc; } } + return 0; } +EXPORT_SYMBOL_GPL(em28xx_init_isoc); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c new file mode 100644 index 00000000000..0b2333ee07f --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -0,0 +1,483 @@ +/* + DVB device driver for em28xx + + (c) 2008 Mauro Carvalho Chehab <mchehab@infradead.org> + + (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com> + - Fixes for the driver to properly work with HVR-950 + + (c) 2008 Aidan Thornton <makosoft@googlemail.com> + + Based on cx88-dvb, saa7134-dvb and videobuf-dvb originally written by: + (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au> + (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/kernel.h> +#include <linux/usb.h> + +#include "em28xx.h" +#include <media/v4l2-common.h> +#include <media/videobuf-vmalloc.h> + +#include "lgdt330x.h" +#include "zl10353.h" + +MODULE_DESCRIPTION("driver for em28xx based DVB cards"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); +MODULE_LICENSE("GPL"); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages [dvb]"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define dprintk(level, fmt, arg...) do { \ +if (debug >= level) \ + printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \ +} while (0) + +#define EM28XX_DVB_NUM_BUFS 5 +#define EM28XX_DVB_MAX_PACKETSIZE 564 +#define EM28XX_DVB_MAX_PACKETS 64 + +struct em28xx_dvb { + struct dvb_frontend *frontend; + + /* feed count management */ + struct mutex lock; + int nfeeds; + + /* general boilerplate stuff */ + struct dvb_adapter adapter; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net net; +}; + + +static inline void print_err_status(struct em28xx *dev, + int packet, int status) +{ + char *errmsg = "Unknown"; + + switch (status) { + case -ENOENT: + errmsg = "unlinked synchronuously"; + break; + case -ECONNRESET: + errmsg = "unlinked asynchronuously"; + break; + case -ENOSR: + errmsg = "Buffer error (overrun)"; + break; + case -EPIPE: + errmsg = "Stalled (device not responding)"; + break; + case -EOVERFLOW: + errmsg = "Babble (bad cable?)"; + break; + case -EPROTO: + errmsg = "Bit-stuff error (bad cable?)"; + break; + case -EILSEQ: + errmsg = "CRC/Timeout (could be anything)"; + break; + case -ETIME: + errmsg = "Device does not respond"; + break; + } + if (packet < 0) { + dprintk(1, "URB status %d [%s].\n", status, errmsg); + } else { + dprintk(1, "URB packet %d, status %d [%s].\n", + packet, status, errmsg); + } +} + +static inline int dvb_isoc_copy(struct em28xx *dev, struct urb *urb) +{ + int i; + + if (!dev) + return 0; + + if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED)) + return 0; + + if (urb->status < 0) { + print_err_status(dev, -1, urb->status); + if (urb->status == -ENOENT) + return 0; + } + + for (i = 0; i < urb->number_of_packets; i++) { + int status = urb->iso_frame_desc[i].status; + + if (status < 0) { + print_err_status(dev, i, status); + if (urb->iso_frame_desc[i].status != -EPROTO) + continue; + } + + dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer + + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + } + + return 0; +} + +static int start_streaming(struct em28xx_dvb *dvb) +{ + int rc; + struct em28xx *dev = dvb->adapter.priv; + + usb_set_interface(dev->udev, 0, 1); + rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); + if (rc < 0) + return rc; + + return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, + EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE, + dvb_isoc_copy); +} + +static int stop_streaming(struct em28xx_dvb *dvb) +{ + struct em28xx *dev = dvb->adapter.priv; + + em28xx_uninit_isoc(dev); + + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); + + return 0; +} + +static int start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct em28xx_dvb *dvb = demux->priv; + int rc, ret; + + if (!demux->dmx.frontend) + return -EINVAL; + + mutex_lock(&dvb->lock); + dvb->nfeeds++; + rc = dvb->nfeeds; + + if (dvb->nfeeds == 1) { + ret = start_streaming(dvb); + if (ret < 0) + rc = ret; + } + + mutex_unlock(&dvb->lock); + return rc; +} + +static int stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct em28xx_dvb *dvb = demux->priv; + int err = 0; + + mutex_lock(&dvb->lock); + dvb->nfeeds--; + + if (0 == dvb->nfeeds) + err = stop_streaming(dvb); + + mutex_unlock(&dvb->lock); + return err; +} + + + +/* ------------------------------------------------------------------ */ +static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire) +{ + struct em28xx *dev = fe->dvb->priv; + + if (acquire) + return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); + else + return em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); +} + +/* ------------------------------------------------------------------ */ + +static struct lgdt330x_config em2880_lgdt3303_dev = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, +}; + +static struct zl10353_config em28xx_zl10353_with_xc3028 = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .parallel_ts = 1, + .if2 = 45600, +}; + +/* ------------------------------------------------------------------ */ + +static int attach_xc3028(u8 addr, struct em28xx *dev) +{ + struct dvb_frontend *fe; + struct xc2028_config cfg; + + memset(&cfg, 0, sizeof(cfg)); + cfg.i2c_adap = &dev->i2c_adap; + cfg.i2c_addr = addr; + cfg.callback = em28xx_tuner_callback; + + if (!dev->dvb->frontend) { + printk(KERN_ERR "%s/2: dvb frontend not attached. " + "Can't attach xc3028\n", + dev->name); + return -EINVAL; + } + + fe = dvb_attach(xc2028_attach, dev->dvb->frontend, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc3028 attach failed\n", + dev->name); + dvb_frontend_detach(dev->dvb->frontend); + dev->dvb->frontend = NULL; + return -EINVAL; + } + + printk(KERN_INFO "%s/2: xc3028 attached\n", dev->name); + + return 0; +} + +/* ------------------------------------------------------------------ */ + +int register_dvb(struct em28xx_dvb *dvb, + struct module *module, + struct em28xx *dev, + struct device *device) +{ + int result; + + mutex_init(&dvb->lock); + + /* register adapter */ + result = dvb_register_adapter(&dvb->adapter, dev->name, module, device, + adapter_nr); + if (result < 0) { + printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n", + dev->name, result); + goto fail_adapter; + } + + /* Ensure all frontends negotiate bus access */ + dvb->frontend->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl; + + dvb->adapter.priv = dev; + + /* register frontend */ + result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (result < 0) { + printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n", + dev->name, result); + goto fail_frontend; + } + + /* register demux stuff */ + dvb->demux.dmx.capabilities = + DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = dvb; + dvb->demux.filternum = 256; + dvb->demux.feednum = 256; + dvb->demux.start_feed = start_feed; + dvb->demux.stop_feed = stop_feed; + + result = dvb_dmx_init(&dvb->demux); + if (result < 0) { + printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n", + dev->name, result); + goto fail_dmx; + } + + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = &dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + if (result < 0) { + printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n", + dev->name, result); + goto fail_dmxdev; + } + + dvb->fe_hw.source = DMX_FRONTEND_0; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", + dev->name, result); + goto fail_fe_hw; + } + + dvb->fe_mem.source = DMX_MEMORY_FE; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); + if (result < 0) { + printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", + dev->name, result); + goto fail_fe_mem; + } + + result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n", + dev->name, result); + goto fail_fe_conn; + } + + /* register network adapter */ + dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); + return 0; + +fail_fe_conn: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); +fail_fe_mem: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); +fail_fe_hw: + dvb_dmxdev_release(&dvb->dmxdev); +fail_dmxdev: + dvb_dmx_release(&dvb->demux); +fail_dmx: + dvb_unregister_frontend(dvb->frontend); +fail_frontend: + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); +fail_adapter: + return result; +} + +static void unregister_dvb(struct em28xx_dvb *dvb) +{ + dvb_net_release(&dvb->net); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(&dvb->demux); + dvb_unregister_frontend(dvb->frontend); + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); +} + + +static int dvb_init(struct em28xx *dev) +{ + int result = 0; + struct em28xx_dvb *dvb; + + if (!dev->has_dvb) { + /* This device does not support the extension */ + return 0; + } + + dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL); + + if (dvb == NULL) { + printk(KERN_INFO "em28xx_dvb: memory allocation failed\n"); + return -ENOMEM; + } + dev->dvb = dvb; + + em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); + /* init frontend */ + switch (dev->model) { + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: + dvb->frontend = dvb_attach(lgdt330x_attach, + &em2880_lgdt3303_dev, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_zl10353_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; + default: + printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" + " isn't supported yet\n", + dev->name); + break; + } + if (NULL == dvb->frontend) { + printk(KERN_ERR + "%s/2: frontend initialization failed\n", + dev->name); + result = -EINVAL; + goto out_free; + } + + /* register everything */ + result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev); + + if (result < 0) + goto out_free; + + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); + printk(KERN_INFO "Successfully loaded em28xx-dvb\n"); + return 0; + +out_free: + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); + kfree(dvb); + dev->dvb = NULL; + return result; +} + +static int dvb_fini(struct em28xx *dev) +{ + if (!dev->has_dvb) { + /* This device does not support the extension */ + return 0; + } + + if (dev->dvb) { + unregister_dvb(dev->dvb); + dev->dvb = NULL; + } + + return 0; +} + +static struct em28xx_ops dvb_ops = { + .id = EM28XX_DVB, + .name = "Em28xx dvb Extension", + .init = dvb_init, + .fini = dvb_fini, +}; + +static int __init em28xx_dvb_register(void) +{ + return em28xx_register_extension(&dvb_ops); +} + +static void __exit em28xx_dvb_unregister(void) +{ + em28xx_unregister_extension(&dvb_ops); +} + +module_init(em28xx_dvb_register); +module_exit(em28xx_dvb_unregister); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index cacd04d46e9..6a78fd294ca 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -33,19 +33,29 @@ /* ----------------------------------------------------------- */ -static unsigned int i2c_scan = 0; +static unsigned int i2c_scan; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); -static unsigned int i2c_debug = 0; +static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); -#define dprintk1(lvl,fmt, args...) if (i2c_debug>=lvl) do {\ - printk(fmt, ##args); } while (0) -#define dprintk2(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \ - printk(KERN_DEBUG "%s at %s: " fmt, \ - dev->name, __FUNCTION__ , ##args); } while (0) + +#define dprintk1(lvl, fmt, args...) \ +do { \ + if (i2c_debug >= lvl) { \ + printk(fmt, ##args); \ + } \ +} while (0) + +#define dprintk2(lvl, fmt, args...) \ +do { \ + if (i2c_debug >= lvl) { \ + printk(KERN_DEBUG "%s at %s: " fmt, \ + dev->name, __func__ , ##args); \ + } \ +} while (0) /* * em2800_i2c_send_max4() @@ -235,16 +245,16 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, return 0; for (i = 0; i < num; i++) { addr = msgs[i].addr << 1; - dprintk2(2,"%s %s addr=%x len=%d:", + dprintk2(2, "%s %s addr=%x len=%d:", (msgs[i].flags & I2C_M_RD) ? "read" : "write", i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len); - if (!msgs[i].len) { /* no len: check only for device presence */ + if (!msgs[i].len) { /* no len: check only for device presence */ if (dev->is_em2800) rc = em2800_i2c_check_for_device(dev, addr); else rc = em28xx_i2c_check_for_device(dev, addr); if (rc < 0) { - dprintk2(2," no device\n"); + dprintk2(2, " no device\n"); return rc; } @@ -258,14 +268,13 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, rc = em28xx_i2c_recv_bytes(dev, addr, msgs[i].buf, msgs[i].len); - if (i2c_debug>=2) { - for (byte = 0; byte < msgs[i].len; byte++) { + if (i2c_debug >= 2) { + for (byte = 0; byte < msgs[i].len; byte++) printk(" %02x", msgs[i].buf[byte]); - } } } else { /* write bytes */ - if (i2c_debug>=2) { + if (i2c_debug >= 2) { for (byte = 0; byte < msgs[i].len; byte++) printk(" %02x", msgs[i].buf[byte]); } @@ -281,13 +290,13 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, } if (rc < 0) goto err; - if (i2c_debug>=2) + if (i2c_debug >= 2) printk("\n"); } return num; - err: - dprintk2(2," ERROR: %i\n", rc); +err: + dprintk2(2, " ERROR: %i\n", rc); return rc; } @@ -330,7 +339,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) return -1; buf = 0; - if (1 != (err = i2c_master_send(&dev->i2c_client, &buf, 1))) { + + err = i2c_master_send(&dev->i2c_client, &buf, 1); + if (err != 1) { printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", dev->name, err); return -1; @@ -403,8 +414,10 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) break; } printk(KERN_INFO "Table at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n", - em_eeprom->string_idx_table,em_eeprom->string1, - em_eeprom->string2,em_eeprom->string3); + em_eeprom->string_idx_table, + em_eeprom->string1, + em_eeprom->string2, + em_eeprom->string3); return 0; } @@ -430,58 +443,61 @@ static int attach_inform(struct i2c_client *client) struct em28xx *dev = client->adapter->algo_data; switch (client->addr << 1) { - case 0x86: - case 0x84: - case 0x96: - case 0x94: - { - struct v4l2_priv_tun_config tda9887_cfg; - - struct tuner_setup tun_setup; - - tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; - tun_setup.type = TUNER_TDA9887; - tun_setup.addr = client->addr; - - em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup); - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &dev->tda9887_conf; - em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, - &tda9887_cfg); - break; - } - case 0x42: - dprintk1(1,"attach_inform: saa7114 detected.\n"); - break; - case 0x4a: - dprintk1(1,"attach_inform: saa7113 detected.\n"); - break; - case 0xa0: - dprintk1(1,"attach_inform: eeprom detected.\n"); - break; - case 0x60: - case 0x8e: - { - struct IR_i2c *ir = i2c_get_clientdata(client); - dprintk1(1,"attach_inform: IR detected (%s).\n",ir->phys); - em28xx_set_ir(dev,ir); - break; - } - case 0x80: - case 0x88: - dprintk1(1,"attach_inform: msp34xx detected.\n"); - break; - case 0xb8: - case 0xba: - dprintk1(1,"attach_inform: tvp5150 detected.\n"); - break; - - default: - if (!dev->tuner_addr) - dev->tuner_addr = client->addr; - - dprintk1(1,"attach inform: detected I2C address %x\n", client->addr << 1); + case 0x86: + case 0x84: + case 0x96: + case 0x94: + { + struct v4l2_priv_tun_config tda9887_cfg; + + struct tuner_setup tun_setup; + + tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; + tun_setup.type = TUNER_TDA9887; + tun_setup.addr = client->addr; + + em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, + &tun_setup); + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &dev->tda9887_conf; + em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, + &tda9887_cfg); + break; + } + case 0x42: + dprintk1(1, "attach_inform: saa7114 detected.\n"); + break; + case 0x4a: + dprintk1(1, "attach_inform: saa7113 detected.\n"); + break; + case 0xa0: + dprintk1(1, "attach_inform: eeprom detected.\n"); + break; + case 0x60: + case 0x8e: + { + struct IR_i2c *ir = i2c_get_clientdata(client); + dprintk1(1, "attach_inform: IR detected (%s).\n", + ir->phys); + em28xx_set_ir(dev, ir); + break; + } + case 0x80: + case 0x88: + dprintk1(1, "attach_inform: msp34xx detected.\n"); + break; + case 0xb8: + case 0xba: + dprintk1(1, "attach_inform: tvp5150 detected.\n"); + break; + + default: + if (!dev->tuner_addr) + dev->tuner_addr = client->addr; + + dprintk1(1, "attach inform: detected I2C address %x\n", + client->addr << 1); } diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index 10da2fd8d98..bb5807159b8 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -32,10 +32,12 @@ static unsigned int ir_debug; module_param(ir_debug, int, 0644); -MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); +MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); -#define dprintk(fmt, arg...) if (ir_debug) \ - printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) +#define dprintk(fmt, arg...) \ + if (ir_debug) { \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \ + } /* ----------------------------------------------------------------------- */ @@ -44,7 +46,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ - if (1 != i2c_master_recv(&ir->c,&b,1)) { + if (1 != i2c_master_recv(&ir->c, &b, 1)) { dprintk("read error\n"); return -EIO; } @@ -74,24 +76,25 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char code; /* poll IR chip */ - if (2 != i2c_master_recv(&ir->c,buf,2)) + if (2 != i2c_master_recv(&ir->c, buf, 2)) return -EIO; /* Does eliminate repeated parity code */ - if (buf[1]==0xff) + if (buf[1] == 0xff) return 0; - ir->old=buf[1]; + ir->old = buf[1]; /* Rearranges bits to the right order */ - code= ((buf[0]&0x01)<<5) | /* 0010 0000 */ + code = ((buf[0]&0x01)<<5) | /* 0010 0000 */ ((buf[0]&0x02)<<3) | /* 0001 0000 */ ((buf[0]&0x04)<<1) | /* 0000 1000 */ ((buf[0]&0x08)>>1) | /* 0000 0100 */ ((buf[0]&0x10)>>3) | /* 0000 0010 */ ((buf[0]&0x20)>>5); /* 0000 0001 */ - dprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",code,buf[0]); + dprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n", + code, buf[0]); /* return key */ *ir_key = code; @@ -106,15 +109,14 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, /* poll IR chip */ - if (3 != i2c_master_recv(&ir->c,buf,3)) { + if (3 != i2c_master_recv(&ir->c, buf, 3)) { dprintk("read error\n"); return -EIO; } dprintk("key %02x\n", buf[2]&0x3f); - if (buf[0]!=0x00){ + if (buf[0] != 0x00) return 0; - } *ir_key = buf[2]&0x3f; *ir_raw = buf[2]&0x3f; diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h new file mode 100644 index 00000000000..fac1ab23f62 --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -0,0 +1,89 @@ +#define EM_GPIO_0 (1 << 0) +#define EM_GPIO_1 (1 << 1) +#define EM_GPIO_2 (1 << 2) +#define EM_GPIO_3 (1 << 3) +#define EM_GPIO_4 (1 << 4) +#define EM_GPIO_5 (1 << 5) +#define EM_GPIO_6 (1 << 6) +#define EM_GPIO_7 (1 << 7) + +#define EM_GPO_0 (1 << 0) +#define EM_GPO_1 (1 << 1) +#define EM_GPO_2 (1 << 2) +#define EM_GPO_3 (1 << 3) + +/* em2800 registers */ +#define EM2800_R08_AUDIOSRC 0x08 + +/* em28xx registers */ + + /* GPIO/GPO registers */ +#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */ +#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */ + +#define EM28XX_R06_I2C_CLK 0x06 +#define EM28XX_R0A_CHIPID 0x0a +#define EM28XX_R0C_USBSUSP 0x0c /* */ + +#define EM28XX_R0E_AUDIOSRC 0x0e +#define EM28XX_R0F_XCLK 0x0f + +#define EM28XX_R10_VINMODE 0x10 +#define EM28XX_R11_VINCTRL 0x11 +#define EM28XX_R12_VINENABLE 0x12 /* */ + +#define EM28XX_R14_GAMMA 0x14 +#define EM28XX_R15_RGAIN 0x15 +#define EM28XX_R16_GGAIN 0x16 +#define EM28XX_R17_BGAIN 0x17 +#define EM28XX_R18_ROFFSET 0x18 +#define EM28XX_R19_GOFFSET 0x19 +#define EM28XX_R1A_BOFFSET 0x1a + +#define EM28XX_R1B_OFLOW 0x1b +#define EM28XX_R1C_HSTART 0x1c +#define EM28XX_R1D_VSTART 0x1d +#define EM28XX_R1E_CWIDTH 0x1e +#define EM28XX_R1F_CHEIGHT 0x1f + +#define EM28XX_R20_YGAIN 0x20 +#define EM28XX_R21_YOFFSET 0x21 +#define EM28XX_R22_UVGAIN 0x22 +#define EM28XX_R23_UOFFSET 0x23 +#define EM28XX_R24_VOFFSET 0x24 +#define EM28XX_R25_SHARPNESS 0x25 + +#define EM28XX_R26_COMPR 0x26 +#define EM28XX_R27_OUTFMT 0x27 + +#define EM28XX_R28_XMIN 0x28 +#define EM28XX_R29_XMAX 0x29 +#define EM28XX_R2A_YMIN 0x2a +#define EM28XX_R2B_YMAX 0x2b + +#define EM28XX_R30_HSCALELOW 0x30 +#define EM28XX_R31_HSCALEHIGH 0x31 +#define EM28XX_R32_VSCALELOW 0x32 +#define EM28XX_R33_VSCALEHIGH 0x33 + +#define EM28XX_R40_AC97LSB 0x40 +#define EM28XX_R41_AC97MSB 0x41 +#define EM28XX_R42_AC97ADDR 0x42 +#define EM28XX_R43_AC97BUSY 0x43 + +/* em202 registers */ +#define EM28XX_R02_MASTER_AC97 0x02 +#define EM28XX_R10_LINE_IN_AC97 0x10 +#define EM28XX_R14_VIDEO_AC97 0x14 + +/* register settings */ +#define EM2800_AUDIO_SRC_TUNER 0x0d +#define EM2800_AUDIO_SRC_LINE 0x0c +#define EM28XX_AUDIO_SRC_TUNER 0xc0 +#define EM28XX_AUDIO_SRC_LINE 0x80 + +/* FIXME: Need to be populated with the other chip ID's */ +enum em28xx_chip_id { + CHIP_ID_EM2860 = 34, + CHIP_ID_EM2883 = 36, +}; diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 4abe6701a77..285bc62bbe4 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1,5 +1,6 @@ /* - em28xx-video.c - driver for Empia EM2800/EM2820/2840 USB video capture devices + em28xx-video.c - driver for Empia EM2800/EM2820/2840 USB + video capture devices Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> Markus Rechberger <mrechberger@gmail.com> @@ -52,7 +53,19 @@ #define em28xx_videodbg(fmt, arg...) do {\ if (video_debug) \ printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__ , ##arg); } while (0) + dev->name, __func__ , ##arg); } while (0) + +static unsigned int isoc_debug; +module_param(isoc_debug, int, 0644); +MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]"); + +#define em28xx_isocdbg(fmt, arg...) \ +do {\ + if (isoc_debug) { \ + printk(KERN_INFO "%s %s :"fmt, \ + dev->name, __func__ , ##arg); \ + } \ + } while (0) MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); @@ -74,9 +87,9 @@ MODULE_PARM_DESC(video_nr, "video device numbers"); MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); MODULE_PARM_DESC(radio_nr, "radio device numbers"); -static unsigned int video_debug = 0; -module_param(video_debug,int,0644); -MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); +static unsigned int video_debug; +module_param(video_debug, int, 0644); +MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -93,7 +106,7 @@ static struct v4l2_queryctrl em28xx_qctrl[] = { .step = 0x1, .default_value = 0x1f, .flags = 0, - },{ + }, { .id = V4L2_CID_AUDIO_MUTE, .type = V4L2_CTRL_TYPE_BOOLEAN, .name = "Mute", @@ -107,8 +120,391 @@ static struct v4l2_queryctrl em28xx_qctrl[] = { static struct usb_driver em28xx_usb_driver; +/* ------------------------------------------------------------------ + DMA and thread functions + ------------------------------------------------------------------*/ + +/* + * Announces that a buffer were filled and request the next + */ +static inline void buffer_filled(struct em28xx *dev, + struct em28xx_dmaqueue *dma_q, + struct em28xx_buffer *buf) +{ + /* Advice that buffer was filled */ + em28xx_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); + buf->vb.state = VIDEOBUF_DONE; + buf->vb.field_count++; + do_gettimeofday(&buf->vb.ts); + + dev->isoc_ctl.buf = NULL; + + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); +} + +/* + * Identify the buffer header type and properly handles + */ +static void em28xx_copy_video(struct em28xx *dev, + struct em28xx_dmaqueue *dma_q, + struct em28xx_buffer *buf, + unsigned char *p, + unsigned char *outp, unsigned long len) +{ + void *fieldstart, *startwrite, *startread; + int linesdone, currlinedone, offset, lencopy, remain; + int bytesperline = dev->width << 1; + + if (dma_q->pos + len > buf->vb.size) + len = buf->vb.size - dma_q->pos; + + if (p[0] != 0x88 && p[0] != 0x22) { + em28xx_isocdbg("frame is not complete\n"); + len += 4; + } else + p += 4; + + startread = p; + remain = len; + + /* Interlaces frame */ + if (buf->top_field) + fieldstart = outp; + else + fieldstart = outp + bytesperline; + + linesdone = dma_q->pos / bytesperline; + currlinedone = dma_q->pos % bytesperline; + offset = linesdone * bytesperline * 2 + currlinedone; + startwrite = fieldstart + offset; + lencopy = bytesperline - currlinedone; + lencopy = lencopy > remain ? remain : lencopy; + + if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) { + em28xx_isocdbg("Overflow of %zi bytes past buffer end (1)\n", + ((char *)startwrite + lencopy) - + ((char *)outp + buf->vb.size)); + lencopy = remain = (char *)outp + buf->vb.size - (char *)startwrite; + } + if (lencopy <= 0) + return; + memcpy(startwrite, startread, lencopy); + + remain -= lencopy; + + while (remain > 0) { + startwrite += lencopy + bytesperline; + startread += lencopy; + if (bytesperline > remain) + lencopy = remain; + else + lencopy = bytesperline; + + if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) { + em28xx_isocdbg("Overflow of %zi bytes past buffer end (2)\n", + ((char *)startwrite + lencopy) - + ((char *)outp + buf->vb.size)); + lencopy = remain = (char *)outp + buf->vb.size - + (char *)startwrite; + } + if (lencopy <= 0) + break; + + memcpy(startwrite, startread, lencopy); + + remain -= lencopy; + } + + dma_q->pos += len; +} + +static inline void print_err_status(struct em28xx *dev, + int packet, int status) +{ + char *errmsg = "Unknown"; + + switch (status) { + case -ENOENT: + errmsg = "unlinked synchronuously"; + break; + case -ECONNRESET: + errmsg = "unlinked asynchronuously"; + break; + case -ENOSR: + errmsg = "Buffer error (overrun)"; + break; + case -EPIPE: + errmsg = "Stalled (device not responding)"; + break; + case -EOVERFLOW: + errmsg = "Babble (bad cable?)"; + break; + case -EPROTO: + errmsg = "Bit-stuff error (bad cable?)"; + break; + case -EILSEQ: + errmsg = "CRC/Timeout (could be anything)"; + break; + case -ETIME: + errmsg = "Device does not respond"; + break; + } + if (packet < 0) { + em28xx_isocdbg("URB status %d [%s].\n", status, errmsg); + } else { + em28xx_isocdbg("URB packet %d, status %d [%s].\n", + packet, status, errmsg); + } +} + +/* + * video-buf generic routine to get the next available buffer + */ +static inline void get_next_buf(struct em28xx_dmaqueue *dma_q, + struct em28xx_buffer **buf) +{ + struct em28xx *dev = container_of(dma_q, struct em28xx, vidq); + char *outp; + + if (list_empty(&dma_q->active)) { + em28xx_isocdbg("No active queue to serve\n"); + dev->isoc_ctl.buf = NULL; + *buf = NULL; + return; + } + + /* Get the next buffer */ + *buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue); + + /* Cleans up buffer - Usefull for testing for frame/URB loss */ + outp = videobuf_to_vmalloc(&(*buf)->vb); + memset(outp, 0, (*buf)->vb.size); -/********************* v4l2 interface ******************************************/ + dev->isoc_ctl.buf = *buf; + + return; +} + +/* + * Controls the isoc copy of each urb packet + */ +static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb) +{ + struct em28xx_buffer *buf; + struct em28xx_dmaqueue *dma_q = urb->context; + unsigned char *outp = NULL; + int i, len = 0, rc = 1; + unsigned char *p; + + if (!dev) + return 0; + + if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED)) + return 0; + + if (urb->status < 0) { + print_err_status(dev, -1, urb->status); + if (urb->status == -ENOENT) + return 0; + } + + buf = dev->isoc_ctl.buf; + if (buf != NULL) + outp = videobuf_to_vmalloc(&buf->vb); + + for (i = 0; i < urb->number_of_packets; i++) { + int status = urb->iso_frame_desc[i].status; + + if (status < 0) { + print_err_status(dev, i, status); + if (urb->iso_frame_desc[i].status != -EPROTO) + continue; + } + + len = urb->iso_frame_desc[i].actual_length - 4; + + if (urb->iso_frame_desc[i].actual_length <= 0) { + /* em28xx_isocdbg("packet %d is empty",i); - spammy */ + continue; + } + if (urb->iso_frame_desc[i].actual_length > + dev->max_pkt_size) { + em28xx_isocdbg("packet bigger than packet size"); + continue; + } + + p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + /* FIXME: incomplete buffer checks where removed to make + logic simpler. Impacts of those changes should be evaluated + */ + if (p[0] == 0x33 && p[1] == 0x95 && p[2] == 0x00) { + em28xx_isocdbg("VBI HEADER!!!\n"); + /* FIXME: Should add vbi copy */ + continue; + } + if (p[0] == 0x22 && p[1] == 0x5a) { + em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2], + len, (p[2] & 1)? "odd" : "even"); + + if (!(p[2] & 1)) { + if (buf != NULL) + buffer_filled(dev, dma_q, buf); + get_next_buf(dma_q, &buf); + if (buf == NULL) + outp = NULL; + else + outp = videobuf_to_vmalloc(&buf->vb); + } + + if (buf != NULL) { + if (p[2] & 1) + buf->top_field = 0; + else + buf->top_field = 1; + } + + dma_q->pos = 0; + } + if (buf != NULL) + em28xx_copy_video(dev, dma_q, buf, p, outp, len); + } + return rc; +} + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ + +static int +buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) +{ + struct em28xx_fh *fh = vq->priv_data; + struct em28xx *dev = fh->dev; + struct v4l2_frequency f; + + *size = 16 * fh->dev->width * fh->dev->height >> 3; + if (0 == *count) + *count = EM28XX_DEF_BUF; + + if (*count < EM28XX_MIN_BUF) + *count = EM28XX_MIN_BUF; + + /* Ask tuner to go to analog mode */ + memset(&f, 0, sizeof(f)); + f.frequency = dev->ctl_freq; + + em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f); + + return 0; +} + +/* This is called *without* dev->slock held; please keep it that way */ +static void free_buffer(struct videobuf_queue *vq, struct em28xx_buffer *buf) +{ + struct em28xx_fh *fh = vq->priv_data; + struct em28xx *dev = fh->dev; + unsigned long flags = 0; + if (in_interrupt()) + BUG(); + + /* We used to wait for the buffer to finish here, but this didn't work + because, as we were keeping the state as VIDEOBUF_QUEUED, + videobuf_queue_cancel marked it as finished for us. + (Also, it could wedge forever if the hardware was misconfigured.) + + This should be safe; by the time we get here, the buffer isn't + queued anymore. If we ever start marking the buffers as + VIDEOBUF_ACTIVE, it won't be, though. + */ + spin_lock_irqsave(&dev->slock, flags); + if (dev->isoc_ctl.buf == buf) + dev->isoc_ctl.buf = NULL; + spin_unlock_irqrestore(&dev->slock, flags); + + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int +buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct em28xx_fh *fh = vq->priv_data; + struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb); + struct em28xx *dev = fh->dev; + int rc = 0, urb_init = 0; + + /* FIXME: It assumes depth = 16 */ + /* The only currently supported format is 16 bits/pixel */ + buf->vb.size = 16 * dev->width * dev->height >> 3; + + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + buf->vb.width = dev->width; + buf->vb.height = dev->height; + buf->vb.field = field; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc < 0) + goto fail; + } + + if (!dev->isoc_ctl.num_bufs) + urb_init = 1; + + if (urb_init) { + rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS, + EM28XX_NUM_BUFS, dev->max_pkt_size, + em28xx_isoc_copy); + if (rc < 0) + goto fail; + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + free_buffer(vq, buf); + return rc; +} + +static void +buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb); + struct em28xx_fh *fh = vq->priv_data; + struct em28xx *dev = fh->dev; + struct em28xx_dmaqueue *vidq = &dev->vidq; + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &vidq->active); + +} + +static void buffer_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb); + struct em28xx_fh *fh = vq->priv_data; + struct em28xx *dev = (struct em28xx *)fh->dev; + + em28xx_isocdbg("em28xx: called buffer_release\n"); + + free_buffer(vq, buf); +} + +static struct videobuf_queue_ops em28xx_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/********************* v4l2 interface **************************************/ /* * em28xx_config() @@ -123,9 +519,9 @@ static int em28xx_config(struct em28xx *dev) /* enable vbi capturing */ -/* em28xx_write_regs_req(dev,0x00,0x0e,"\xC0",1); audio register */ -/* em28xx_write_regs_req(dev,0x00,0x0f,"\x80",1); clk register */ - em28xx_write_regs_req(dev,0x00,0x11,"\x51",1); +/* em28xx_write_regs_req(dev, 0x00, 0x0e, "\xC0", 1); audio register */ +/* em28xx_write_regs_req(dev, 0x00, 0x0f, "\x80", 1); clk register */ + em28xx_write_regs_req(dev, 0x00, 0x11, "\x51", 1); dev->mute = 1; /* maybe not the right place... */ dev->volume = 0x1f; @@ -152,23 +548,6 @@ static void em28xx_config_i2c(struct em28xx *dev) em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL); } -/* - * em28xx_empty_framequeues() - * prepare queues for incoming and outgoing frames - */ -static void em28xx_empty_framequeues(struct em28xx *dev) -{ - u32 i; - - INIT_LIST_HEAD(&dev->inqueue); - INIT_LIST_HEAD(&dev->outqueue); - - for (i = 0; i < EM28XX_NUM_FRAMES; i++) { - dev->frame[i].state = F_UNUSED; - dev->frame[i].buf.bytesused = 0; - } -} - static void video_mux(struct em28xx *dev, int index) { struct v4l2_routing route; @@ -181,12 +560,15 @@ static void video_mux(struct em28xx *dev, int index) em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route); if (dev->has_msp34xx) { - if (dev->i2s_speed) - em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed); + if (dev->i2s_speed) { + em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, + &dev->i2s_speed); + } route.input = dev->ctl_ainput; route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1); /* Note: this is msp3400 specific */ - em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route); + em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, + &route); } em28xx_audio_analog_set(dev); @@ -202,15 +584,12 @@ static int res_get(struct em28xx_fh *fh) if (fh->stream_on) return rc; - mutex_lock(&dev->lock); - if (dev->stream_on) - rc = -EINVAL; - else { - dev->stream_on = 1; - fh->stream_on = 1; - } + return -EINVAL; + mutex_lock(&dev->lock); + dev->stream_on = 1; + fh->stream_on = 1; mutex_unlock(&dev->lock); return rc; } @@ -231,33 +610,6 @@ static void res_free(struct em28xx_fh *fh) } /* - * em28xx_vm_open() - */ -static void em28xx_vm_open(struct vm_area_struct *vma) -{ - struct em28xx_frame_t *f = vma->vm_private_data; - f->vma_use_count++; -} - -/* - * em28xx_vm_close() - */ -static void em28xx_vm_close(struct vm_area_struct *vma) -{ - /* NOTE: buffers are not freed here */ - struct em28xx_frame_t *f = vma->vm_private_data; - - if (f->vma_use_count) - f->vma_use_count--; -} - -static struct vm_operations_struct em28xx_vm_ops = { - .open = em28xx_vm_open, - .close = em28xx_vm_close, -}; - - -/* * em28xx_get_ctrl() * return the current saturation, brightness or contrast, mute state */ @@ -296,34 +648,6 @@ static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) } } -/* - * em28xx_stream_interrupt() - * stops streaming - */ -static int em28xx_stream_interrupt(struct em28xx *dev) -{ - int rc = 0; - - /* stop reading from the device */ - - dev->stream = STREAM_INTERRUPT; - rc = wait_event_timeout(dev->wait_stream, - (dev->stream == STREAM_OFF) || - (dev->state & DEV_DISCONNECTED), - EM28XX_URB_TIMEOUT); - - if (rc) { - dev->state |= DEV_MISCONFIGURED; - em28xx_videodbg("device is misconfigured; close and " - "open /dev/video%d again\n", - dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN); - return rc; - } - - return 0; -} - - static int check_dev(struct em28xx *dev) { if (dev->state & DEV_DISCONNECTED) { @@ -370,8 +694,8 @@ static int vidioc_g_fmt_cap(struct file *file, void *priv, f->fmt.pix.width = dev->width; f->fmt.pix.height = dev->height; f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; - f->fmt.pix.bytesperline = dev->bytesperline; - f->fmt.pix.sizeimage = dev->frame_size; + f->fmt.pix.bytesperline = dev->width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * dev->height; f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */ @@ -447,7 +771,7 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - int rc, i; + int rc; rc = check_dev(dev); if (rc < 0) @@ -457,49 +781,34 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, mutex_lock(&dev->lock); - for (i = 0; i < dev->num_frames; i++) - if (dev->frame[i].vma_use_count) { - em28xx_videodbg("VIDIOC_S_FMT failed. " - "Unmap the buffers first.\n"); - rc = -EINVAL; - goto err; - } - - /* stop io in case it is already in progress */ - if (dev->stream == STREAM_ON) { - em28xx_videodbg("VIDIOC_SET_FMT: interrupting stream\n"); - rc = em28xx_stream_interrupt(dev); - if (rc < 0) - goto err; + if (videobuf_queue_is_busy(&fh->vb_vidq)) { + em28xx_errdev("%s queue busy\n", __func__); + rc = -EBUSY; + goto out; } - em28xx_release_buffers(dev); - dev->io = IO_NONE; + if (dev->stream_on && !fh->stream_on) { + em28xx_errdev("%s device in use by another fh\n", __func__); + rc = -EBUSY; + goto out; + } /* set new image size */ dev->width = f->fmt.pix.width; dev->height = f->fmt.pix.height; - dev->frame_size = dev->width * dev->height * 2; - dev->field_size = dev->frame_size >> 1; - dev->bytesperline = dev->width * 2; get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); - /* FIXME: This is really weird! Why capture is starting with - this ioctl ??? - */ - em28xx_uninit_isoc(dev); em28xx_set_alternate(dev); - em28xx_capture_start(dev, 1); em28xx_resolution_set(dev); - em28xx_init_isoc(dev); + rc = 0; -err: +out: mutex_unlock(&dev->lock); return rc; } -static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm) +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; @@ -524,9 +833,6 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm) /* set new image size */ dev->width = f.fmt.pix.width; dev->height = f.fmt.pix.height; - dev->frame_size = dev->width * dev->height * 2; - dev->field_size = dev->frame_size >> 1; - dev->bytesperline = dev->width * 2; get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); em28xx_resolution_set(dev); @@ -619,11 +925,11 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) index = dev->ctl_ainput; - if (index == 0) { + if (index == 0) strcpy(a->name, "Television"); - } else { + else strcpy(a->name, "Line In"); - } + a->capability = V4L2_AUDCAP_STEREO; a->index = index; @@ -834,9 +1140,9 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int em28xx_reg_len(int reg) { switch (reg) { - case AC97LSB_REG: - case HSCALELOW_REG: - case VSCALELOW_REG: + case EM28XX_R40_AC97LSB: + case EM28XX_R30_HSCALELOW: + case EM28XX_R32_VSCALELOW: return 2; default: return 1; @@ -860,13 +1166,13 @@ static int vidioc_g_register(struct file *file, void *priv, reg->val = ret; } else { - u64 val = 0; + __le64 val = 0; ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS, reg->reg, (char *)&val, 2); if (ret < 0) return ret; - reg->val = cpu_to_le64((__u64)val); + reg->val = le64_to_cpu(val); } return 0; @@ -877,9 +1183,9 @@ static int vidioc_s_register(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - u64 buf; + __le64 buf; - buf = le64_to_cpu((__u64)reg->val); + buf = cpu_to_le64(reg->val); return em28xx_write_regs(dev, reg->reg, (char *)&buf, em28xx_reg_len(reg->reg)); @@ -918,23 +1224,11 @@ static int vidioc_streamon(struct file *file, void *priv, if (rc < 0) return rc; - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || dev->io != IO_MMAP) - return -EINVAL; - - if (list_empty(&dev->inqueue)) - return -EINVAL; - - mutex_lock(&dev->lock); - if (unlikely(res_get(fh) < 0)) { - mutex_unlock(&dev->lock); + if (unlikely(res_get(fh) < 0)) return -EBUSY; - } - - dev->stream = STREAM_ON; /* FIXME: Start video capture here? */ - mutex_unlock(&dev->lock); - return 0; + return (videobuf_streamon(&fh->vb_vidq)); } static int vidioc_streamoff(struct file *file, void *priv, @@ -948,23 +1242,14 @@ static int vidioc_streamoff(struct file *file, void *priv, if (rc < 0) return rc; - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || dev->io != IO_MMAP) + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (type != fh->type) return -EINVAL; - mutex_lock(&dev->lock); - - if (dev->stream == STREAM_ON) { - em28xx_videodbg("VIDIOC_STREAMOFF: interrupting stream\n"); - rc = em28xx_stream_interrupt(dev); - if (rc < 0) { - mutex_unlock(&dev->lock); - return rc; - } - } - - em28xx_empty_framequeues(dev); + videobuf_streamoff(&fh->vb_vidq); + res_free(fh); - mutex_unlock(&dev->lock); return 0; } @@ -1058,53 +1343,13 @@ static int vidioc_reqbufs(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - u32 i; int rc; rc = check_dev(dev); if (rc < 0) return rc; - if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - rb->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - if (dev->io == IO_READ) { - em28xx_videodbg("method is set to read;" - " close and open the device again to" - " choose the mmap I/O method\n"); - return -EINVAL; - } - - for (i = 0; i < dev->num_frames; i++) - if (dev->frame[i].vma_use_count) { - em28xx_videodbg("VIDIOC_REQBUFS failed; " - "previous buffers are still mapped\n"); - return -EINVAL; - } - - mutex_lock(&dev->lock); - - if (dev->stream == STREAM_ON) { - em28xx_videodbg("VIDIOC_REQBUFS: interrupting stream\n"); - rc = em28xx_stream_interrupt(dev); - if (rc < 0) { - mutex_unlock(&dev->lock); - return rc; - } - } - - em28xx_empty_framequeues(dev); - - em28xx_release_buffers(dev); - if (rb->count) - rb->count = em28xx_request_buffers(dev, rb->count); - - dev->frame_current = NULL; - dev->io = rb->count ? IO_MMAP : IO_NONE; - - mutex_unlock(&dev->lock); - return 0; + return (videobuf_reqbufs(&fh->vb_vidq, rb)); } static int vidioc_querybuf(struct file *file, void *priv, @@ -1118,52 +1363,20 @@ static int vidioc_querybuf(struct file *file, void *priv, if (rc < 0) return rc; - if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - b->index >= dev->num_frames || dev->io != IO_MMAP) - return -EINVAL; - - mutex_lock(&dev->lock); - - memcpy(b, &dev->frame[b->index].buf, sizeof(*b)); - - if (dev->frame[b->index].vma_use_count) - b->flags |= V4L2_BUF_FLAG_MAPPED; - - if (dev->frame[b->index].state == F_DONE) - b->flags |= V4L2_BUF_FLAG_DONE; - else if (dev->frame[b->index].state != F_UNUSED) - b->flags |= V4L2_BUF_FLAG_QUEUED; - - mutex_unlock(&dev->lock); - return 0; + return (videobuf_querybuf(&fh->vb_vidq, b)); } static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - unsigned long lock_flags; int rc; rc = check_dev(dev); if (rc < 0) return rc; - if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || dev->io != IO_MMAP || - b->index >= dev->num_frames) - return -EINVAL; - - if (dev->frame[b->index].state != F_UNUSED) - return -EAGAIN; - - dev->frame[b->index].state = F_QUEUED; - - /* add frame to fifo */ - spin_lock_irqsave(&dev->queue_lock, lock_flags); - list_add_tail(&dev->frame[b->index].frame, &dev->inqueue); - spin_unlock_irqrestore(&dev->queue_lock, lock_flags); - - return 0; + return (videobuf_qbuf(&fh->vb_vidq, b)); } static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) @@ -1171,46 +1384,24 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int rc; - struct em28xx_frame_t *f; - unsigned long lock_flags; rc = check_dev(dev); if (rc < 0) return rc; - if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || dev->io != IO_MMAP) - return -EINVAL; - - if (list_empty(&dev->outqueue)) { - if (dev->stream == STREAM_OFF) - return -EINVAL; - - if (file->f_flags & O_NONBLOCK) - return -EAGAIN; - - rc = wait_event_interruptible(dev->wait_frame, - (!list_empty(&dev->outqueue)) || - (dev->state & DEV_DISCONNECTED)); - if (rc) - return rc; - - if (dev->state & DEV_DISCONNECTED) - return -ENODEV; - } - - spin_lock_irqsave(&dev->queue_lock, lock_flags); - f = list_entry(dev->outqueue.next, struct em28xx_frame_t, frame); - list_del(dev->outqueue.next); - spin_unlock_irqrestore(&dev->queue_lock, lock_flags); - - f->state = F_UNUSED; - memcpy(b, &f->buf, sizeof(*b)); + return (videobuf_dqbuf(&fh->vb_vidq, b, + file->f_flags & O_NONBLOCK)); +} - if (f->vma_use_count) - b->flags |= V4L2_BUF_FLAG_MAPPED; +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) +{ + struct em28xx_fh *fh = priv; - return 0; + return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8); } +#endif + /* ----------------------------------------------------------- */ /* RADIO ESPECIFIC IOCTLS */ @@ -1316,17 +1507,18 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) { int minor = iminor(inode); int errCode = 0, radio = 0; - struct em28xx *h,*dev = NULL; + struct em28xx *h, *dev = NULL; struct em28xx_fh *fh; + enum v4l2_buf_type fh_type = 0; list_for_each_entry(h, &em28xx_devlist, devlist) { if (h->vdev->minor == minor) { dev = h; - dev->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + fh_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; } if (h->vbi_dev->minor == minor) { dev = h; - dev->type = V4L2_BUF_TYPE_VBI_CAPTURE; + fh_type = V4L2_BUF_TYPE_VBI_CAPTURE; } if (h->radio_dev && h->radio_dev->minor == minor) { @@ -1338,10 +1530,10 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) return -ENODEV; em28xx_videodbg("open minor=%d type=%s users=%d\n", - minor,v4l2_type_names[dev->type],dev->users); + minor, v4l2_type_names[fh_type], dev->users); - fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); + fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); return -ENOMEM; @@ -1349,28 +1541,24 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) mutex_lock(&dev->lock); fh->dev = dev; fh->radio = radio; + fh->type = fh_type; filp->private_data = fh; - if (dev->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { dev->width = norm_maxw(dev); dev->height = norm_maxh(dev); - dev->frame_size = dev->width * dev->height * 2; - dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */ - dev->bytesperline = dev->width * 2; dev->hscale = 0; dev->vscale = 0; + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); - em28xx_capture_start(dev, 1); em28xx_resolution_set(dev); + /* Needed, since GPIO might have disabled power of + some i2c device + */ + em28xx_config_i2c(dev); - /* start the transfer */ - errCode = em28xx_init_isoc(dev); - if (errCode) - goto err; - - em28xx_empty_framequeues(dev); } if (fh->radio) { em28xx_videodbg("video_open: setting radio device\n"); @@ -1379,8 +1567,12 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev->users++; -err: + videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops, + NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED, + sizeof(struct em28xx_buffer), fh); + mutex_unlock(&dev->lock); + return errCode; } @@ -1423,12 +1615,13 @@ static void em28xx_release_resources(struct em28xx *dev) usb_put_dev(dev->udev); /* Mark device as unused */ - em28xx_devused&=~(1<<dev->devno); + em28xx_devused &= ~(1<<dev->devno); } /* * em28xx_v4l2_close() - * stops streaming and deallocates all resources allocated by the v4l2 calls and ioctls + * stops streaming and deallocates all resources allocated by the v4l2 + * calls and ioctls */ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) { @@ -1445,9 +1638,8 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) mutex_lock(&dev->lock); if (dev->users == 1) { - em28xx_uninit_isoc(dev); - em28xx_release_buffers(dev); - dev->io = IO_NONE; + videobuf_stop(&fh->vb_vidq); + videobuf_mmap_free(&fh->vb_vidq); /* the device is already disconnect, free the remaining resources */ @@ -1458,6 +1650,10 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) return 0; } + /* do this before setting alternate! */ + em28xx_uninit_isoc(dev); + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); + /* set alternate 0 */ dev->alt = 0; em28xx_videodbg("setting alternate 0\n"); @@ -1479,135 +1675,29 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) * will allocate buffers when called for the first time */ static ssize_t -em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count, - loff_t * f_pos) +em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count, + loff_t *pos) { - struct em28xx_frame_t *f, *i; - unsigned long lock_flags; - int ret = 0; struct em28xx_fh *fh = filp->private_data; struct em28xx *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; /* FIXME: read() is not prepared to allow changing the video resolution while streaming. Seems a bug at em28xx_set_fmt */ - if (unlikely(res_get(fh) < 0)) - return -EBUSY; - - mutex_lock(&dev->lock); - - if (dev->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - em28xx_videodbg("V4l2_Buf_type_videocapture is set\n"); - - if (dev->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - em28xx_videodbg("V4L2_BUF_TYPE_VBI_CAPTURE is set\n"); - em28xx_videodbg("not supported yet! ...\n"); - if (copy_to_user(buf, "", 1)) { - mutex_unlock(&dev->lock); - return -EFAULT; - } - mutex_unlock(&dev->lock); - return (1); - } - if (dev->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { - em28xx_videodbg("V4L2_BUF_TYPE_SLICED_VBI_CAPTURE is set\n"); - em28xx_videodbg("not supported yet! ...\n"); - if (copy_to_user(buf, "", 1)) { - mutex_unlock(&dev->lock); - return -EFAULT; - } - mutex_unlock(&dev->lock); - return (1); - } - - if (dev->state & DEV_DISCONNECTED) { - em28xx_videodbg("device not present\n"); - mutex_unlock(&dev->lock); - return -ENODEV; - } - - if (dev->state & DEV_MISCONFIGURED) { - em28xx_videodbg("device misconfigured; close and open it again\n"); - mutex_unlock(&dev->lock); - return -EIO; - } - - if (dev->io == IO_MMAP) { - em28xx_videodbg ("IO method is set to mmap; close and open" - " the device again to choose the read method\n"); - mutex_unlock(&dev->lock); - return -EINVAL; - } - - if (dev->io == IO_NONE) { - if (!em28xx_request_buffers(dev, EM28XX_NUM_READ_FRAMES)) { - em28xx_errdev("read failed, not enough memory\n"); - mutex_unlock(&dev->lock); - return -ENOMEM; - } - dev->io = IO_READ; - dev->stream = STREAM_ON; - em28xx_queue_unusedframes(dev); - } - - if (!count) { - mutex_unlock(&dev->lock); - return 0; - } - - if (list_empty(&dev->outqueue)) { - if (filp->f_flags & O_NONBLOCK) { - mutex_unlock(&dev->lock); - return -EAGAIN; - } - ret = wait_event_interruptible - (dev->wait_frame, - (!list_empty(&dev->outqueue)) || - (dev->state & DEV_DISCONNECTED)); - if (ret) { - mutex_unlock(&dev->lock); - return ret; - } - if (dev->state & DEV_DISCONNECTED) { - mutex_unlock(&dev->lock); - return -ENODEV; - } - dev->video_bytesread = 0; - } - - f = list_entry(dev->outqueue.prev, struct em28xx_frame_t, frame); - - em28xx_queue_unusedframes(dev); - - if (count > f->buf.length) - count = f->buf.length; - - if ((dev->video_bytesread + count) > dev->frame_size) - count = dev->frame_size - dev->video_bytesread; - - if (copy_to_user(buf, f->bufmem+dev->video_bytesread, count)) { - em28xx_err("Error while copying to user\n"); - return -EFAULT; - } - dev->video_bytesread += count; - - if (dev->video_bytesread == dev->frame_size) { - spin_lock_irqsave(&dev->queue_lock, lock_flags); - list_for_each_entry(i, &dev->outqueue, frame) - i->state = F_UNUSED; - INIT_LIST_HEAD(&dev->outqueue); - spin_unlock_irqrestore(&dev->queue_lock, lock_flags); + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (unlikely(res_get(fh))) + return -EBUSY; - em28xx_queue_unusedframes(dev); - dev->video_bytesread = 0; + return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, + filp->f_flags & O_NONBLOCK); } - - *f_pos += count; - - mutex_unlock(&dev->lock); - - return count; + return 0; } /* @@ -1616,46 +1706,21 @@ em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count, */ static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait) { - unsigned int mask = 0; struct em28xx_fh *fh = filp->private_data; struct em28xx *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; if (unlikely(res_get(fh) < 0)) return POLLERR; - mutex_lock(&dev->lock); - - if (dev->state & DEV_DISCONNECTED) { - em28xx_videodbg("device not present\n"); - } else if (dev->state & DEV_MISCONFIGURED) { - em28xx_videodbg("device is misconfigured; close and open it again\n"); - } else { - if (dev->io == IO_NONE) { - if (!em28xx_request_buffers - (dev, EM28XX_NUM_READ_FRAMES)) { - em28xx_warn - ("poll() failed, not enough memory\n"); - } else { - dev->io = IO_READ; - dev->stream = STREAM_ON; - } - } - - if (dev->io == IO_READ) { - em28xx_queue_unusedframes(dev); - poll_wait(filp, &dev->wait_frame, wait); - - if (!list_empty(&dev->outqueue)) - mask |= POLLIN | POLLRDNORM; - - mutex_unlock(&dev->lock); - - return mask; - } - } + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return POLLERR; - mutex_unlock(&dev->lock); - return POLLERR; + return videobuf_poll_stream(filp, &fh->vb_vidq, wait); } /* @@ -1665,69 +1730,23 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) { struct em28xx_fh *fh = filp->private_data; struct em28xx *dev = fh->dev; - unsigned long size = vma->vm_end - vma->vm_start; - unsigned long start = vma->vm_start; - void *pos; - u32 i; + int rc; if (unlikely(res_get(fh) < 0)) return -EBUSY; - mutex_lock(&dev->lock); - - if (dev->state & DEV_DISCONNECTED) { - em28xx_videodbg("mmap: device not present\n"); - mutex_unlock(&dev->lock); - return -ENODEV; - } - - if (dev->state & DEV_MISCONFIGURED) { - em28xx_videodbg ("mmap: Device is misconfigured; close and " - "open it again\n"); - mutex_unlock(&dev->lock); - return -EIO; - } - - if (dev->io != IO_MMAP || !(vma->vm_flags & VM_WRITE)) { - mutex_unlock(&dev->lock); - return -EINVAL; - } + rc = check_dev(dev); + if (rc < 0) + return rc; - if (size > PAGE_ALIGN(dev->frame[0].buf.length)) - size = PAGE_ALIGN(dev->frame[0].buf.length); + rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); - for (i = 0; i < dev->num_frames; i++) { - if ((dev->frame[i].buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) - break; - } - if (i == dev->num_frames) { - em28xx_videodbg("mmap: user supplied mapping address is out of range\n"); - mutex_unlock(&dev->lock); - return -EINVAL; - } - - /* VM_IO is eventually going to replace PageReserved altogether */ - vma->vm_flags |= VM_IO; - vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */ + em28xx_videodbg("vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, + rc); - pos = dev->frame[i].bufmem; - while (size > 0) { /* size is page-aligned */ - if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { - em28xx_videodbg("mmap: vm_insert_page failed\n"); - mutex_unlock(&dev->lock); - return -EAGAIN; - } - start += PAGE_SIZE; - pos += PAGE_SIZE; - size -= PAGE_SIZE; - } - - vma->vm_ops = &em28xx_vm_ops; - vma->vm_private_data = &dev->frame[i]; - - em28xx_vm_open(vma); - mutex_unlock(&dev->lock); - return 0; + return rc; } static const struct file_operations em28xx_v4l_fops = { @@ -1790,6 +1809,9 @@ static const struct video_device em28xx_video_template = { .vidioc_g_register = vidioc_g_register, .vidioc_s_register = vidioc_s_register, #endif +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = vidiocgmbuf, +#endif .tvnorms = V4L2_STD_ALL, .current_norm = V4L2_STD_PAL, @@ -1818,7 +1840,7 @@ static struct video_device em28xx_radio_template = { #endif }; -/******************************** usb interface *****************************************/ +/******************************** usb interface ******************************/ static LIST_HEAD(em28xx_extension_devlist); @@ -1826,32 +1848,28 @@ static DEFINE_MUTEX(em28xx_extension_devlist_lock); int em28xx_register_extension(struct em28xx_ops *ops) { - struct em28xx *h, *dev = NULL; - - list_for_each_entry(h, &em28xx_devlist, devlist) - dev = h; + struct em28xx *dev = NULL; mutex_lock(&em28xx_extension_devlist_lock); list_add_tail(&ops->next, &em28xx_extension_devlist); - if (dev) - ops->init(dev); - + list_for_each_entry(dev, &em28xx_devlist, devlist) { + if (dev) + ops->init(dev); + } printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name); mutex_unlock(&em28xx_extension_devlist_lock); - return 0; } EXPORT_SYMBOL(em28xx_register_extension); void em28xx_unregister_extension(struct em28xx_ops *ops) { - struct em28xx *h, *dev = NULL; - - list_for_each_entry(h, &em28xx_devlist, devlist) - dev = h; + struct em28xx *dev = NULL; - if (dev) - ops->fini(dev); + list_for_each_entry(dev, &em28xx_devlist, devlist) { + if (dev) + ops->fini(dev); + } mutex_lock(&em28xx_extension_devlist_lock); printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); @@ -1875,6 +1893,7 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, vfd->dev = &dev->udev->dev; vfd->release = video_device_release; vfd->type = type; + vfd->debug = video_debug; snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); @@ -1898,7 +1917,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->udev = udev; mutex_init(&dev->lock); - spin_lock_init(&dev->queue_lock); + spin_lock_init(&dev->slock); init_waitqueue_head(&dev->open); init_waitqueue_head(&dev->wait_frame); init_waitqueue_head(&dev->wait_stream); @@ -1910,10 +1929,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->em28xx_read_reg_req = em28xx_read_reg_req; dev->is_em2800 = em28xx_boards[dev->model].is_em2800; - errCode = em28xx_read_reg(dev, CHIPID_REG); - if (errCode >= 0) - em28xx_info("em28xx chip ID = %d\n", errCode); - em28xx_pre_card_setup(dev); errCode = em28xx_config(dev); @@ -1946,10 +1961,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->width = maxw; dev->height = maxh; dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->field_size = dev->width * dev->height; - dev->frame_size = - dev->interlaced ? dev->field_size << 1 : dev->field_size; - dev->bytesperline = dev->width * 2; dev->hscale = 0; dev->vscale = 0; dev->ctl_input = 2; @@ -2005,6 +2016,10 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->radio_dev->minor & 0x1f); } + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + if (dev->has_msp34xx) { /* Send a reset to other chips via gpio */ @@ -2048,6 +2063,9 @@ static void request_module_async(struct work_struct *work) request_module("snd-usb-audio"); else request_module("em28xx-alsa"); + + if (dev->has_dvb) + request_module("em28xx-dvb"); } static void request_modules(struct em28xx *dev) @@ -2077,22 +2095,24 @@ static int em28xx_usb_probe(struct usb_interface *interface, ifnum = interface->altsetting[0].desc.bInterfaceNumber; /* Check to see next free device and mark as used */ - nr=find_first_zero_bit(&em28xx_devused,EM28XX_MAXBOARDS); - em28xx_devused|=1<<nr; + nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS); + em28xx_devused |= 1<<nr; /* Don't register audio interfaces */ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { em28xx_err(DRIVER_NAME " audio device (%04x:%04x): interface %i, class %i\n", - udev->descriptor.idVendor,udev->descriptor.idProduct, + udev->descriptor.idVendor, + udev->descriptor.idProduct, ifnum, interface->altsetting[0].desc.bInterfaceClass); - em28xx_devused&=~(1<<nr); + em28xx_devused &= ~(1<<nr); return -ENODEV; } em28xx_err(DRIVER_NAME " new video device (%04x:%04x): interface %i, class %i\n", - udev->descriptor.idVendor,udev->descriptor.idProduct, + udev->descriptor.idVendor, + udev->descriptor.idProduct, ifnum, interface->altsetting[0].desc.bInterfaceClass); @@ -2102,18 +2122,19 @@ static int em28xx_usb_probe(struct usb_interface *interface, if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) { em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); - em28xx_devused&=~(1<<nr); + em28xx_devused &= ~(1<<nr); return -ENODEV; } if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n"); - em28xx_devused&=~(1<<nr); + em28xx_devused &= ~(1<<nr); return -ENODEV; } if (nr >= EM28XX_MAXBOARDS) { - printk (DRIVER_NAME ": Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS); - em28xx_devused&=~(1<<nr); + printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", + EM28XX_MAXBOARDS); + em28xx_devused &= ~(1<<nr); return -ENOMEM; } @@ -2121,7 +2142,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { em28xx_err(DRIVER_NAME ": out of memory!\n"); - em28xx_devused&=~(1<<nr); + em28xx_devused &= ~(1<<nr); return -ENOMEM; } @@ -2145,14 +2166,14 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* compute alternate max packet sizes */ uif = udev->actconfig->interface[0]; - dev->num_alt=uif->num_altsetting; - em28xx_info("Alternate settings: %i\n",dev->num_alt); -// dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* - dev->alt_max_pkt_size = kmalloc(32* - dev->num_alt,GFP_KERNEL); + dev->num_alt = uif->num_altsetting; + em28xx_info("Alternate settings: %i\n", dev->num_alt); +/* dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* */ + dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL); + if (dev->alt_max_pkt_size == NULL) { em28xx_errdev("out of memory!\n"); - em28xx_devused&=~(1<<nr); + em28xx_devused &= ~(1<<nr); kfree(dev); return -ENOMEM; } @@ -2162,11 +2183,11 @@ static int em28xx_usb_probe(struct usb_interface *interface, wMaxPacketSize); dev->alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); - em28xx_info("Alternate setting %i, max size= %i\n",i, - dev->alt_max_pkt_size[i]); + em28xx_info("Alternate setting %i, max size= %i\n", i, + dev->alt_max_pkt_size[i]); } - if ((card[nr]>=0)&&(card[nr]<em28xx_bcount)) + if ((card[nr] >= 0) && (card[nr] < em28xx_bcount)) dev->model = card[nr]; /* allocate device struct */ @@ -2202,7 +2223,8 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) em28xx_info("disconnecting %s\n", dev->vdev->name); - /* wait until all current v4l2 io is finished then deallocate resources */ + /* wait until all current v4l2 io is finished then deallocate + resources */ mutex_lock(&dev->lock); wake_up_interruptible_all(&dev->open); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 04e0e48ecab..002f170b211 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -26,11 +26,39 @@ #define _EM28XX_H #include <linux/videodev2.h> +#include <media/videobuf-vmalloc.h> + #include <linux/i2c.h> #include <linux/mutex.h> #include <media/ir-kbd-i2c.h> - -#define UNSET -1 +#if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE) +#include <media/videobuf-dvb.h> +#endif +#include "tuner-xc2028.h" +#include "em28xx-reg.h" + +/* Boards supported by driver */ +#define EM2800_BOARD_UNKNOWN 0 +#define EM2820_BOARD_UNKNOWN 1 +#define EM2820_BOARD_TERRATEC_CINERGY_250 2 +#define EM2820_BOARD_PINNACLE_USB_2 3 +#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4 +#define EM2820_BOARD_MSI_VOX_USB_2 5 +#define EM2800_BOARD_TERRATEC_CINERGY_200 6 +#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 +#define EM2800_BOARD_KWORLD_USB2800 8 +#define EM2820_BOARD_PINNACLE_DVC_90 9 +#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10 +#define EM2880_BOARD_TERRATEC_HYBRID_XS 11 +#define EM2820_BOARD_KWORLD_PVRTV2800RF 12 +#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13 +#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14 +#define EM2800_BOARD_VGEAR_POCKETTV 15 +#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 16 + +/* Limits minimum and default number of buffers */ +#define EM28XX_MIN_BUF 4 +#define EM28XX_DEF_BUF 8 /* maximum number of em28xx boards */ #define EM28XX_MAXBOARDS 4 /*FIXME: should be bigger */ @@ -81,31 +109,78 @@ /* time in msecs to wait for i2c writes to finish */ #define EM2800_I2C_WRITE_TIMEOUT 20 -/* the various frame states */ -enum em28xx_frame_state { - F_UNUSED = 0, - F_QUEUED, - F_GRABBING, - F_DONE, - F_ERROR, +enum em28xx_mode { + EM28XX_MODE_UNDEFINED, + EM28XX_ANALOG_MODE, + EM28XX_DIGITAL_MODE, }; -/* stream states */ enum em28xx_stream_state { STREAM_OFF, STREAM_INTERRUPT, STREAM_ON, }; -/* frames */ -struct em28xx_frame_t { - void *bufmem; - struct v4l2_buffer buf; - enum em28xx_frame_state state; +struct em28xx; + +struct em28xx_usb_isoc_ctl { + /* max packet size of isoc transaction */ + int max_pkt_size; + + /* number of allocated urbs */ + int num_bufs; + + /* urb for isoc transfers */ + struct urb **urb; + + /* transfer buffers for isoc transfer */ + char **transfer_buffer; + + /* Last buffer command and region */ + u8 cmd; + int pos, size, pktsize; + + /* Last field: ODD or EVEN? */ + int field; + + /* Stores incomplete commands */ + u32 tmp_buf; + int tmp_buf_len; + + /* Stores already requested buffers */ + struct em28xx_buffer *buf; + + /* Stores the number of received fields */ + int nfields; + + /* isoc urb callback */ + int (*isoc_copy) (struct em28xx *dev, struct urb *urb); + +}; + +struct em28xx_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ +}; + +/* buffer for one video frame */ +struct em28xx_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + struct list_head frame; - unsigned long vma_use_count; int top_field; - int fieldbytesused; + int receiving; +}; + +struct em28xx_dmaqueue { + struct list_head active; + struct list_head queued; + + wait_queue_head_t wq; + + /* Counters to control buffer fill */ + int pos; }; /* io methods */ @@ -152,6 +227,12 @@ enum em28xx_decoder { EM28XX_SAA7114 }; +struct em28xx_reg_seq { + int reg; + unsigned char val, mask; + int sleep; +}; + struct em28xx_board { char *name; int vchannels; @@ -165,8 +246,7 @@ struct em28xx_board { unsigned int mts_firmware:1; unsigned int has_12mhz_i2s:1; unsigned int max_range_640_480:1; - - unsigned int analog_gpio; + unsigned int has_dvb:1; enum em28xx_decoder decoder; @@ -199,7 +279,10 @@ enum em28xx_dev_state { #define EM28XX_NUM_AUDIO_PACKETS 64 #define EM28XX_AUDIO_MAX_PACKET_SIZE 196 /* static value */ #define EM28XX_CAPTURE_STREAM_EN 1 + +/* em28xx extensions */ #define EM28XX_AUDIO 0x10 +#define EM28XX_DVB 0x20 struct em28xx_audio { char name[50]; @@ -217,13 +300,24 @@ struct em28xx_audio { spinlock_t slock; }; +struct em28xx; + +struct em28xx_fh { + struct em28xx *dev; + unsigned int stream_on:1; /* Locks streams */ + int radio; + + struct videobuf_queue vb_vidq; + + enum v4l2_buf_type type; +}; + /* main device struct */ struct em28xx { /* generic device properties */ char name[30]; /* name (including minor) of the device */ int model; /* index in the device_data struct */ int devno; /* marks the number of this device */ - unsigned int analog_gpio; unsigned int is_em2800:1; unsigned int has_msp34xx:1; unsigned int has_tda9887:1; @@ -231,6 +325,16 @@ struct em28xx { unsigned int has_audio_class:1; unsigned int has_12mhz_i2s:1; unsigned int max_range_640_480:1; + unsigned int has_dvb:1; + + /* Some older em28xx chips needs a waiting time after writing */ + unsigned int wait_after_write; + + /* GPIO sequences for analog and digital mode */ + struct em28xx_reg_seq *analog_gpio, *digital_gpio; + + /* GPIO sequences for tuner callbacks */ + struct em28xx_reg_seq *tun_analog_gpio, *tun_digital_gpio; int video_inputs; /* number of video inputs */ struct list_head devlist; @@ -255,36 +359,28 @@ struct em28xx { int mute; int volume; /* frame properties */ - struct em28xx_frame_t frame[EM28XX_NUM_FRAMES]; /* list of frames */ - int num_frames; /* number of frames currently in use */ - unsigned int frame_count; /* total number of transfered frames */ - struct em28xx_frame_t *frame_current; /* the frame that is being filled */ int width; /* current frame width */ int height; /* current frame height */ - int frame_size; /* current frame size */ - int field_size; /* current field size */ - int bytesperline; int hscale; /* horizontal scale factor (see datasheet) */ int vscale; /* vertical scale factor (see datasheet) */ int interlaced; /* 1=interlace fileds, 0=just top fileds */ - int type; unsigned int video_bytesread; /* Number of bytes read */ unsigned long hash; /* eeprom hash - for boards with generic ID */ - unsigned long i2c_hash; /* i2c devicelist hash - for boards with generic ID */ + unsigned long i2c_hash; /* i2c devicelist hash - + for boards with generic ID */ struct em28xx_audio *adev; /* states */ enum em28xx_dev_state state; - enum em28xx_stream_state stream; enum em28xx_io_method io; struct work_struct request_module_wk; /* locks */ struct mutex lock; - spinlock_t queue_lock; + /* spinlock_t queue_lock; */ struct list_head inqueue, outqueue; wait_queue_head_t open, wait_frame, wait_stream; struct video_device *vbi_dev; @@ -292,6 +388,11 @@ struct em28xx { unsigned char eedata[256]; + /* Isoc control struct */ + struct em28xx_dmaqueue vidq; + struct em28xx_usb_isoc_ctl isoc_ctl; + spinlock_t slock; + /* usb transfer */ struct usb_device *udev; /* the usb device */ int alt; /* alternate */ @@ -301,20 +402,21 @@ struct em28xx { struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */ char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */ /* helper funcs that call usb_control_msg */ - int (*em28xx_write_regs) (struct em28xx * dev, u16 reg, char *buf, - int len); - int (*em28xx_read_reg) (struct em28xx * dev, u16 reg); - int (*em28xx_read_reg_req_len) (struct em28xx * dev, u8 req, u16 reg, + int (*em28xx_write_regs) (struct em28xx *dev, u16 reg, char *buf, int len); - int (*em28xx_write_regs_req) (struct em28xx * dev, u8 req, u16 reg, + int (*em28xx_read_reg) (struct em28xx *dev, u16 reg); + int (*em28xx_read_reg_req_len) (struct em28xx *dev, u8 req, u16 reg, + char *buf, int len); + int (*em28xx_write_regs_req) (struct em28xx *dev, u8 req, u16 reg, char *buf, int len); - int (*em28xx_read_reg_req) (struct em28xx * dev, u8 req, u16 reg); -}; + int (*em28xx_read_reg_req) (struct em28xx *dev, u8 req, u16 reg); -struct em28xx_fh { - struct em28xx *dev; - unsigned int stream_on:1; /* Locks streams */ - int radio; + enum em28xx_mode mode; + + /* Caches GPO and GPIO registers */ + unsigned char reg_gpo, reg_gpio; + + struct em28xx_dvb *dvb; }; struct em28xx_ops { @@ -351,22 +453,27 @@ int em28xx_colorlevels_set_default(struct em28xx *dev); int em28xx_capture_start(struct em28xx *dev, int start); int em28xx_outfmt_set_yuv422(struct em28xx *dev); int em28xx_resolution_set(struct em28xx *dev); -int em28xx_init_isoc(struct em28xx *dev); -void em28xx_uninit_isoc(struct em28xx *dev); int em28xx_set_alternate(struct em28xx *dev); +int em28xx_init_isoc(struct em28xx *dev, int max_packets, + int num_bufs, int max_pkt_size, + int (*isoc_copy) (struct em28xx *dev, struct urb *urb)); +void em28xx_uninit_isoc(struct em28xx *dev); +int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode); +int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio); /* Provided by em28xx-video.c */ int em28xx_register_extension(struct em28xx_ops *dev); void em28xx_unregister_extension(struct em28xx_ops *dev); /* Provided by em28xx-cards.c */ -extern int em2800_variant_detect(struct usb_device* udev,int model); +extern int em2800_variant_detect(struct usb_device *udev, int model); extern void em28xx_pre_card_setup(struct em28xx *dev); extern void em28xx_card_setup(struct em28xx *dev); extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; extern const unsigned int em28xx_bcount; void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir); +int em28xx_tuner_callback(void *ptr, int command, int arg); /* Provided by em28xx-input.c */ /* TODO: Check if the standard get_key handlers on ir-common can be used */ @@ -375,71 +482,6 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); -/* em2800 registers */ -#define EM2800_AUDIOSRC_REG 0x08 - -/* em28xx registers */ -#define I2C_CLK_REG 0x06 -#define CHIPID_REG 0x0a -#define USBSUSP_REG 0x0c /* */ - -#define AUDIOSRC_REG 0x0e -#define XCLK_REG 0x0f - -#define VINMODE_REG 0x10 -#define VINCTRL_REG 0x11 -#define VINENABLE_REG 0x12 /* */ - -#define GAMMA_REG 0x14 -#define RGAIN_REG 0x15 -#define GGAIN_REG 0x16 -#define BGAIN_REG 0x17 -#define ROFFSET_REG 0x18 -#define GOFFSET_REG 0x19 -#define BOFFSET_REG 0x1a - -#define OFLOW_REG 0x1b -#define HSTART_REG 0x1c -#define VSTART_REG 0x1d -#define CWIDTH_REG 0x1e -#define CHEIGHT_REG 0x1f - -#define YGAIN_REG 0x20 -#define YOFFSET_REG 0x21 -#define UVGAIN_REG 0x22 -#define UOFFSET_REG 0x23 -#define VOFFSET_REG 0x24 -#define SHARPNESS_REG 0x25 - -#define COMPR_REG 0x26 -#define OUTFMT_REG 0x27 - -#define XMIN_REG 0x28 -#define XMAX_REG 0x29 -#define YMIN_REG 0x2a -#define YMAX_REG 0x2b - -#define HSCALELOW_REG 0x30 -#define HSCALEHIGH_REG 0x31 -#define VSCALELOW_REG 0x32 -#define VSCALEHIGH_REG 0x33 - -#define AC97LSB_REG 0x40 -#define AC97MSB_REG 0x41 -#define AC97ADDR_REG 0x42 -#define AC97BUSY_REG 0x43 - -/* em202 registers */ -#define MASTER_AC97 0x02 -#define LINE_IN_AC97 0x10 -#define VIDEO_AC97 0x14 - -/* register settings */ -#define EM2800_AUDIO_SRC_TUNER 0x0d -#define EM2800_AUDIO_SRC_LINE 0x0c -#define EM28XX_AUDIO_SRC_TUNER 0xc0 -#define EM28XX_AUDIO_SRC_LINE 0x80 - /* printk macros */ #define em28xx_err(fmt, arg...) do {\ @@ -456,80 +498,80 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, printk(KERN_WARNING "%s: "fmt,\ dev->name , ##arg); } while (0) -inline static int em28xx_compression_disable(struct em28xx *dev) +static inline int em28xx_compression_disable(struct em28xx *dev) { /* side effect of disabling scaler and mixer */ - return em28xx_write_regs(dev, COMPR_REG, "\x00", 1); + return em28xx_write_regs(dev, EM28XX_R26_COMPR, "\x00", 1); } -inline static int em28xx_contrast_get(struct em28xx *dev) +static inline int em28xx_contrast_get(struct em28xx *dev) { - return em28xx_read_reg(dev, YGAIN_REG) & 0x1f; + return em28xx_read_reg(dev, EM28XX_R20_YGAIN) & 0x1f; } -inline static int em28xx_brightness_get(struct em28xx *dev) +static inline int em28xx_brightness_get(struct em28xx *dev) { - return em28xx_read_reg(dev, YOFFSET_REG); + return em28xx_read_reg(dev, EM28XX_R21_YOFFSET); } -inline static int em28xx_saturation_get(struct em28xx *dev) +static inline int em28xx_saturation_get(struct em28xx *dev) { - return em28xx_read_reg(dev, UVGAIN_REG) & 0x1f; + return em28xx_read_reg(dev, EM28XX_R22_UVGAIN) & 0x1f; } -inline static int em28xx_u_balance_get(struct em28xx *dev) +static inline int em28xx_u_balance_get(struct em28xx *dev) { - return em28xx_read_reg(dev, UOFFSET_REG); + return em28xx_read_reg(dev, EM28XX_R23_UOFFSET); } -inline static int em28xx_v_balance_get(struct em28xx *dev) +static inline int em28xx_v_balance_get(struct em28xx *dev) { - return em28xx_read_reg(dev, VOFFSET_REG); + return em28xx_read_reg(dev, EM28XX_R24_VOFFSET); } -inline static int em28xx_gamma_get(struct em28xx *dev) +static inline int em28xx_gamma_get(struct em28xx *dev) { - return em28xx_read_reg(dev, GAMMA_REG) & 0x3f; + return em28xx_read_reg(dev, EM28XX_R14_GAMMA) & 0x3f; } -inline static int em28xx_contrast_set(struct em28xx *dev, s32 val) +static inline int em28xx_contrast_set(struct em28xx *dev, s32 val) { u8 tmp = (u8) val; - return em28xx_write_regs(dev, YGAIN_REG, &tmp, 1); + return em28xx_write_regs(dev, EM28XX_R20_YGAIN, &tmp, 1); } -inline static int em28xx_brightness_set(struct em28xx *dev, s32 val) +static inline int em28xx_brightness_set(struct em28xx *dev, s32 val) { u8 tmp = (u8) val; - return em28xx_write_regs(dev, YOFFSET_REG, &tmp, 1); + return em28xx_write_regs(dev, EM28XX_R21_YOFFSET, &tmp, 1); } -inline static int em28xx_saturation_set(struct em28xx *dev, s32 val) +static inline int em28xx_saturation_set(struct em28xx *dev, s32 val) { u8 tmp = (u8) val; - return em28xx_write_regs(dev, UVGAIN_REG, &tmp, 1); + return em28xx_write_regs(dev, EM28XX_R22_UVGAIN, &tmp, 1); } -inline static int em28xx_u_balance_set(struct em28xx *dev, s32 val) +static inline int em28xx_u_balance_set(struct em28xx *dev, s32 val) { u8 tmp = (u8) val; - return em28xx_write_regs(dev, UOFFSET_REG, &tmp, 1); + return em28xx_write_regs(dev, EM28XX_R23_UOFFSET, &tmp, 1); } -inline static int em28xx_v_balance_set(struct em28xx *dev, s32 val) +static inline int em28xx_v_balance_set(struct em28xx *dev, s32 val) { u8 tmp = (u8) val; - return em28xx_write_regs(dev, VOFFSET_REG, &tmp, 1); + return em28xx_write_regs(dev, EM28XX_R24_VOFFSET, &tmp, 1); } -inline static int em28xx_gamma_set(struct em28xx *dev, s32 val) +static inline int em28xx_gamma_set(struct em28xx *dev, s32 val) { u8 tmp = (u8) val; - return em28xx_write_regs(dev, GAMMA_REG, &tmp, 1); + return em28xx_write_regs(dev, EM28XX_R14_GAMMA, &tmp, 1); } /*FIXME: maxw should be dependent of alt mode */ -inline static unsigned int norm_maxw(struct em28xx *dev) +static inline unsigned int norm_maxw(struct em28xx *dev) { if (dev->max_range_640_480) return 640; @@ -537,7 +579,7 @@ inline static unsigned int norm_maxw(struct em28xx *dev) return 720; } -inline static unsigned int norm_maxh(struct em28xx *dev) +static inline unsigned int norm_maxh(struct em28xx *dev) { if (dev->max_range_640_480) return 480; diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h index 02c741d8f85..cc77d144df3 100644 --- a/drivers/media/video/et61x251/et61x251.h +++ b/drivers/media/video/et61x251/et61x251.h @@ -199,7 +199,7 @@ do { \ dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ else if ((level) >= 3) \ dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \ - __FILE__, __FUNCTION__, __LINE__ , ## args); \ + __FILE__, __func__, __LINE__ , ## args); \ } \ } while (0) # define KDBG(level, fmt, args...) \ @@ -209,7 +209,7 @@ do { \ pr_info("et61x251: " fmt "\n", ## args); \ else if ((level) == 3) \ pr_debug("sn9c102: [%s:%s:%d] " fmt "\n", __FILE__, \ - __FUNCTION__, __LINE__ , ## args); \ + __func__, __LINE__ , ## args); \ } \ } while (0) # define V4LDBG(level, name, cmd) \ @@ -225,7 +225,7 @@ do { \ #undef PDBG #define PDBG(fmt, args...) \ -dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __FUNCTION__, \ +dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__, \ __LINE__ , ## args) #undef PDBGG diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 06b6a3ae06c..15d037ae25c 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -34,7 +34,7 @@ #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/page-flags.h> -#include <linux/byteorder/generic.h> +#include <asm/byteorder.h> #include <asm/page.h> #include <asm/uaccess.h> @@ -2523,7 +2523,9 @@ static const struct file_operations et61x251_fops = { .open = et61x251_open, .release = et61x251_release, .ioctl = et61x251_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = et61x251_read, .poll = et61x251_poll, .mmap = et61x251_mmap, @@ -2538,7 +2540,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) { struct usb_device *udev = interface_to_usbdev(intf); struct et61x251_device* cam; - static unsigned int dev_nr = 0; + static unsigned int dev_nr; unsigned int i; int err = 0; diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c index c7fed340565..352f84d440f 100644 --- a/drivers/media/video/hexium_gemini.c +++ b/drivers/media/video/hexium_gemini.c @@ -25,12 +25,12 @@ #include <media/saa7146_vv.h> -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "debug verbosity"); /* global variables */ -static int hexium_num = 0; +static int hexium_num; #define HEXIUM_GEMINI 4 #define HEXIUM_GEMINI_DUAL 5 diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c index 137c4736da0..8d3c1482e7e 100644 --- a/drivers/media/video/hexium_orion.c +++ b/drivers/media/video/hexium_orion.c @@ -25,12 +25,12 @@ #include <media/saa7146_vv.h> -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "debug verbosity"); /* global variables */ -static int hexium_num = 0; +static int hexium_num; #define HEXIUM_HV_PCI6_ORION 1 #define HEXIUM_ORION_1SVHS_3BNC 2 diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 9851987b95f..7b65f5e537f 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -40,7 +40,6 @@ #include <linux/i2c.h> #include <linux/i2c-id.h> #include <linux/workqueue.h> -#include <asm/semaphore.h> #include <media/ir-common.h> #include <media/ir-kbd-i2c.h> @@ -51,7 +50,7 @@ static int debug; module_param(debug, int, 0644); /* debug level (0,1,2) */ -static int hauppauge = 0; +static int hauppauge; module_param(hauppauge, int, 0644); /* Choose Hauppauge remote */ MODULE_PARM_DESC(hauppauge, "Specify Hauppauge remote: 0=black, 1=grey (defaults to 0)"); @@ -154,7 +153,7 @@ static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) } if(buf[0] !=0 || buf[1] !=0 || buf[2] !=0 || buf[3] != 0) - dprintk(2, "%s: 0x%2x 0x%2x 0x%2x 0x%2x\n", __FUNCTION__, + dprintk(2, "%s: 0x%2x 0x%2x 0x%2x 0x%2x\n", __func__, buf[0], buf[1], buf[2], buf[3]); /* no key pressed or signal from other ir remote */ @@ -509,10 +508,13 @@ static int ir_probe(struct i2c_adapter *adap) static const int probe_em28XX[] = { 0x30, 0x47, -1 }; static const int probe_cx88[] = { 0x18, 0x6b, 0x71, -1 }; static const int probe_cx23885[] = { 0x6b, -1 }; - const int *probe = NULL; - struct i2c_client c; - unsigned char buf; - int i,rc; + const int *probe; + struct i2c_msg msg = { + .flags = I2C_M_RD, + .len = 0, + .buf = NULL, + }; + int i, rc; switch (adap->id) { case I2C_HW_B_BT848: @@ -533,20 +535,18 @@ static int ir_probe(struct i2c_adapter *adap) case I2C_HW_B_CX23885: probe = probe_cx23885; break; - } - if (NULL == probe) + default: return 0; + } - memset(&c,0,sizeof(c)); - c.adapter = adap; for (i = 0; -1 != probe[i]; i++) { - c.addr = probe[i]; - rc = i2c_master_recv(&c,&buf,0); + msg.addr = probe[i]; + rc = i2c_transfer(adap, &msg, 1); dprintk(1,"probe 0x%02x @ %s: %s\n", probe[i], adap->name, - (0 == rc) ? "yes" : "no"); - if (0 == rc) { - ir_attach(adap,probe[i],0,0); + (1 == rc) ? "yes" : "no"); + if (1 == rc) { + ir_attach(adap, probe[i], 0, 0); break; } } diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index 270906fc314..5d7ee8fcdd5 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -1,6 +1,8 @@ config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL + depends on INPUT # due to VIDEO_IR + depends on HOTPLUG # due to FW_LOADER select I2C_ALGOBIT select FW_LOADER select VIDEO_IR @@ -10,6 +12,7 @@ config VIDEO_IVTV select VIDEO_CX25840 select VIDEO_MSP3400 select VIDEO_SAA711X + select VIDEO_SAA717X select VIDEO_SAA7127 select VIDEO_TVAUDIO select VIDEO_CS53L32A diff --git a/drivers/media/video/ivtv/Makefile b/drivers/media/video/ivtv/Makefile index a0389014fa8..26ce0d6eaee 100644 --- a/drivers/media/video/ivtv/Makefile +++ b/drivers/media/video/ivtv/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_VIDEO_IVTV) += ivtv.o obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c index f23c6b8d691..4fb8faefe2c 100644 --- a/drivers/media/video/ivtv/ivtv-cards.c +++ b/drivers/media/video/ivtv/ivtv-cards.c @@ -40,6 +40,8 @@ #define MSP_MONO MSP_INPUT(MSP_IN_MONO, MSP_IN_TUNER1, \ MSP_DSP_IN_SCART, MSP_DSP_IN_SCART) +#define V4L2_STD_NOT_MN (V4L2_STD_PAL|V4L2_STD_SECAM) + /* usual i2c tuner addresses to probe */ static struct ivtv_card_tuner_i2c ivtv_i2c_std = { .radio = { I2C_CLIENT_END }, @@ -298,7 +300,7 @@ static const struct ivtv_card ivtv_card_mpg600 = { .gpio_audio_detect = { .mask = 0x0900, .stereo = 0x0100 }, .tuners = { /* The PAL tuner is confirmed */ - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FQ1216ME }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FQ1216ME }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_mpg600, @@ -339,7 +341,7 @@ static const struct ivtv_card ivtv_card_mpg160 = { .lang1 = 0x0004, .lang2 = 0x0000, .both = 0x0008 }, .gpio_audio_detect = { .mask = 0x0900, .stereo = 0x0100 }, .tuners = { - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FQ1216ME }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FQ1216ME }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_mpg160, @@ -375,7 +377,7 @@ static const struct ivtv_card ivtv_card_pg600 = { { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, }, .tuners = { - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FQ1216ME }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FQ1216ME }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_pg600, @@ -416,11 +418,10 @@ static const struct ivtv_card ivtv_card_avc2410 = { on the country/region setting of the user to decide which tuner is available. */ .tuners = { - /* This tuner has been verified for the AVC2410 */ - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, - /* This is a good guess, but I'm not totally sure this is - the correct tuner for NTSC. */ - { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_ALL - V4L2_STD_NTSC_M_JP, + .tuner = TUNER_PHILIPS_FM1236_MK3 }, + { .std = V4L2_STD_NTSC_M_JP, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_avc2410, .i2c = &ivtv_i2c_std, @@ -491,7 +492,7 @@ static const struct ivtv_card ivtv_card_tg5000tv = { .gpio_video_input = { .mask = 0x0030, .tuner = 0x0000, .composite = 0x0010, .svideo = 0x0020 }, .tuners = { - { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FQ1286 }, + { .std = V4L2_STD_525_60|V4L2_STD_MN, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_tg5000tv, .i2c = &ivtv_i2c_std, @@ -522,7 +523,7 @@ static const struct ivtv_card ivtv_card_va2000 = { { IVTV_CARD_INPUT_AUD_TUNER, MSP_TUNER }, }, .tuners = { - { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FQ1286 }, + { .std = V4L2_STD_525_60|V4L2_STD_MN, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_va2000, .i2c = &ivtv_i2c_std, @@ -566,7 +567,7 @@ static const struct ivtv_card ivtv_card_cx23416gyc = { .gpio_audio_freq = { .mask = 0xc000, .f32000 = 0x0000, .f44100 = 0x4000, .f48000 = 0x8000 }, .tuners = { - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, .pci_list = ivtv_pci_cx23416gyc, @@ -598,7 +599,7 @@ static const struct ivtv_card ivtv_card_cx23416gyc_nogr = { .gpio_audio_freq = { .mask = 0xc000, .f32000 = 0x0000, .f44100 = 0x4000, .f48000 = 0x8000 }, .tuners = { - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, .i2c = &ivtv_i2c_std, @@ -628,7 +629,7 @@ static const struct ivtv_card ivtv_card_cx23416gyc_nogrycs = { .gpio_audio_freq = { .mask = 0xc000, .f32000 = 0x0000, .f44100 = 0x4000, .f48000 = 0x8000 }, .tuners = { - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, .i2c = &ivtv_i2c_std, @@ -668,7 +669,7 @@ static const struct ivtv_card ivtv_card_gv_mvprx = { .gpio_audio_input = { .mask = 0xffff, .tuner = 0x0200, .linein = 0x0300 }, .tuners = { /* This card has the Panasonic VP27 tuner */ - { .std = V4L2_STD_525_60, .tuner = TUNER_PANASONIC_VP27 }, + { .std = V4L2_STD_525_60|V4L2_STD_MN, .tuner = TUNER_PANASONIC_VP27 }, }, .pci_list = ivtv_pci_gv_mvprx, .i2c = &ivtv_i2c_std, @@ -705,7 +706,7 @@ static const struct ivtv_card ivtv_card_gv_mvprx2e = { .gpio_audio_input = { .mask = 0xffff, .tuner = 0x0200, .linein = 0x0300 }, .tuners = { /* This card has the Panasonic VP27 tuner */ - { .std = V4L2_STD_525_60, .tuner = TUNER_PANASONIC_VP27 }, + { .std = V4L2_STD_525_60|V4L2_STD_MN, .tuner = TUNER_PANASONIC_VP27 }, }, .pci_list = ivtv_pci_gv_mvprx2e, .i2c = &ivtv_i2c_std, @@ -740,7 +741,7 @@ static const struct ivtv_card ivtv_card_gotview_pci_dvd = { .gpio_init = { .direction = 0xf000, .initial_value = 0xA000 }, .tuners = { /* This card has a Philips FQ1216ME MK3 tuner */ - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, }, .pci_list = ivtv_pci_gotview_pci_dvd, .i2c = &ivtv_i2c_std, @@ -779,7 +780,7 @@ static const struct ivtv_card ivtv_card_gotview_pci_dvd2 = { .gpio_audio_input = { .mask = 0x0800, .tuner = 0, .linein = 0, .radio = 0x0800 }, .tuners = { /* This card has a Philips FQ1216ME MK5 tuner */ - { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, + { .std = V4L2_STD_NOT_MN, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, }, .pci_list = ivtv_pci_gotview_pci_dvd2, .i2c = &ivtv_i2c_std, @@ -857,7 +858,7 @@ static const struct ivtv_card ivtv_card_dctmvtvp1 = { .gpio_video_input = { .mask = 0x0030, .tuner = 0x0000, .composite = 0x0010, .svideo = 0x0020}, .tuners = { - { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FQ1286 }, + { .std = V4L2_STD_525_60|V4L2_STD_MN, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_dctmvtvp1, .i2c = &ivtv_i2c_std, @@ -876,6 +877,7 @@ static const struct ivtv_card_pci_info ivtv_pci_pg600v2[] = { static const struct ivtv_card ivtv_card_pg600v2 = { .type = IVTV_CARD_PG600V2, .name = "Yuan PG600-2, GotView PCI DVD Lite", + .comment = "only Composite and S-Video inputs are supported, not the tuner\n", .v4l2_capabilities = IVTV_CAP_ENCODER, .hw_video = IVTV_HW_CX25840, .hw_audio = IVTV_HW_CX25840, @@ -922,6 +924,7 @@ static const struct ivtv_card ivtv_card_club3d = { }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, .gpio_init = { .direction = 0x1000, .initial_value = 0x1000 }, /* tuner reset */ + .xceive_pin = 12, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, @@ -945,15 +948,22 @@ static const struct ivtv_card ivtv_card_avertv_mce116 = { .hw_video = IVTV_HW_CX25840, .hw_audio = IVTV_HW_CX25840, .hw_audio_ctrl = IVTV_HW_CX25840, - .hw_all = IVTV_HW_CX25840 | IVTV_HW_WM8739, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739, .video_inputs = { - { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 }, - { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 }, + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, }, .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, }, - .gpio_init = { .direction = 0xe000, .initial_value = 0x4000 }, /* enable line-in */ + /* enable line-in */ + .gpio_init = { .direction = 0xe400, .initial_value = 0x4400 }, + .xceive_pin = 10, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, .pci_list = ivtv_pci_avertv_mce116, .i2c = &ivtv_i2c_std, }; @@ -991,7 +1001,7 @@ static const struct ivtv_card ivtv_card_aver_pvr150 = { .gpio_audio_input = { .mask = 0x0800, .tuner = 0, .linein = 0, .radio = 0x0800 }, .tuners = { /* This card has a Partsnic PTI-5NF05 tuner */ - { .std = V4L2_STD_525_60, .tuner = TUNER_TCL_2002N }, + { .std = V4L2_STD_525_60|V4L2_STD_MN, .tuner = TUNER_TCL_2002N }, }, .pci_list = ivtv_pci_aver_pvr150, .i2c = &ivtv_i2c_radio, @@ -1059,12 +1069,48 @@ static const struct ivtv_card ivtv_card_asus_falcon2 = { }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, M52790_IN_TUNER }, .tuners = { - { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + { .std = V4L2_STD_525_60|V4L2_STD_MN, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, .pci_list = ivtv_pci_asus_falcon2, .i2c = &ivtv_i2c_std, }; +/* ------------------------------------------------------------------------- */ + +/* AVerMedia M104 miniPCI card */ + +static const struct ivtv_card_pci_info ivtv_pci_aver_m104[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc136 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_aver_m104 = { + .type = IVTV_CARD_AVER_M104, + .name = "AVerMedia M104", + .comment = "Not yet supported!\n", + .v4l2_capabilities = 0, /*IVTV_CAP_ENCODER,*/ + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739, + .video_inputs = { + { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 }, + /* enable line-in + reset tuner */ + .gpio_init = { .direction = 0xe400, .initial_value = 0x4000 }, + .xceive_pin = 10, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .pci_list = ivtv_pci_aver_m104, + .i2c = &ivtv_i2c_std, +}; + static const struct ivtv_card *ivtv_card_list[] = { &ivtv_card_pvr250, &ivtv_card_pvr350, @@ -1090,6 +1136,7 @@ static const struct ivtv_card *ivtv_card_list[] = { &ivtv_card_asus_falcon2, &ivtv_card_aver_pvr150, &ivtv_card_aver_ezmaker, + &ivtv_card_aver_m104, /* Variations of standard cards but with the same PCI IDs. These cards must come last in this list. */ @@ -1121,7 +1168,8 @@ int ivtv_get_input(struct ivtv *itv, u16 index, struct v4l2_input *input) if (index >= itv->nof_inputs) return -EINVAL; input->index = index; - strcpy(input->name, input_strs[card_input->video_type - 1]); + strlcpy(input->name, input_strs[card_input->video_type - 1], + sizeof(input->name)); input->type = (card_input->video_type == IVTV_CARD_INPUT_VID_TUNER ? V4L2_INPUT_TYPE_TUNER : V4L2_INPUT_TYPE_CAMERA); input->audioset = (1 << itv->nof_audio_inputs) - 1; @@ -1138,7 +1186,7 @@ int ivtv_get_output(struct ivtv *itv, u16 index, struct v4l2_output *output) if (index >= itv->card->nof_outputs) return -EINVAL; output->index = index; - strcpy(output->name, card_output->name); + strlcpy(output->name, card_output->name, sizeof(output->name)); output->type = V4L2_OUTPUT_TYPE_ANALOG; output->audioset = 1; output->std = V4L2_STD_ALL; @@ -1157,7 +1205,8 @@ int ivtv_get_audio_input(struct ivtv *itv, u16 index, struct v4l2_audio *audio) memset(audio, 0, sizeof(*audio)); if (index >= itv->nof_audio_inputs) return -EINVAL; - strcpy(audio->name, input_strs[aud_input->audio_type - 1]); + strlcpy(audio->name, input_strs[aud_input->audio_type - 1], + sizeof(audio->name)); audio->index = index; audio->capability = V4L2_AUDCAP_STEREO; return 0; @@ -1168,6 +1217,6 @@ int ivtv_get_audio_output(struct ivtv *itv, u16 index, struct v4l2_audioout *aud memset(aud_output, 0, sizeof(*aud_output)); if (itv->card->video_outputs == NULL || index != 0) return -EINVAL; - strcpy(aud_output->name, "A/V Audio Out"); + strlcpy(aud_output->name, "A/V Audio Out", sizeof(aud_output->name)); return 0; } diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h index 191aafdd996..748485dcebb 100644 --- a/drivers/media/video/ivtv/ivtv-cards.h +++ b/drivers/media/video/ivtv/ivtv-cards.h @@ -48,7 +48,8 @@ #define IVTV_CARD_ASUS_FALCON2 21 /* ASUS Falcon2 */ #define IVTV_CARD_AVER_PVR150PLUS 22 /* AVerMedia PVR-150 Plus */ #define IVTV_CARD_AVER_EZMAKER 23 /* AVerMedia EZMaker PCI Deluxe */ -#define IVTV_CARD_LAST 23 +#define IVTV_CARD_AVER_M104 24 /* AverMedia M104 miniPCI card */ +#define IVTV_CARD_LAST 24 /* Variants of existing cards but with the same PCI IDs. The driver detects these based on other device information. @@ -119,7 +120,7 @@ #define IVTV_CARD_MAX_VIDEO_INPUTS 6 #define IVTV_CARD_MAX_AUDIO_INPUTS 3 -#define IVTV_CARD_MAX_TUNERS 2 +#define IVTV_CARD_MAX_TUNERS 3 /* SAA71XX HW inputs */ #define IVTV_SAA71XX_COMPOSITE0 0 @@ -244,6 +245,7 @@ struct ivtv_card_tuner_i2c { struct ivtv_card { int type; char *name; + char *comment; u32 v4l2_capabilities; u32 hw_video; /* hardware used to process video */ u32 hw_audio; /* hardware used to process audio */ @@ -256,6 +258,7 @@ struct ivtv_card { int nof_outputs; const struct ivtv_card_output *video_outputs; u8 gr_config; /* config byte for the ghost reduction device */ + u8 xceive_pin; /* XCeive tuner GPIO reset pin */ /* GPIO card-specific settings */ struct ivtv_gpio_init gpio_init; diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c index 8c02fa66159..c7e449f6397 100644 --- a/drivers/media/video/ivtv/ivtv-controls.c +++ b/drivers/media/video/ivtv/ivtv-controls.c @@ -181,12 +181,12 @@ static int ivtv_setup_vbi_fmt(struct ivtv *itv, enum v4l2_mpeg_stream_vbi_fmt fm return 0; } /* Need sliced data for mpeg insertion */ - if (get_service_set(itv->vbi.sliced_in) == 0) { + if (ivtv_get_service_set(itv->vbi.sliced_in) == 0) { if (itv->is_60hz) itv->vbi.sliced_in->service_set = V4L2_SLICED_CAPTION_525; else itv->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625; - expand_service_set(itv->vbi.sliced_in, itv->is_50hz); + ivtv_expand_service_set(itv->vbi.sliced_in, itv->is_50hz); } return 0; } diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 948ca35e7ee..797e636771d 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -101,7 +101,7 @@ static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, static unsigned int cardtype_c = 1; static unsigned int tuner_c = 1; static unsigned int radio_c = 1; -static char pal[] = "--"; +static char pal[] = "---"; static char secam[] = "--"; static char ntsc[] = "-"; @@ -126,12 +126,13 @@ static int dec_mpg_buffers = IVTV_DEFAULT_DEC_MPG_BUFFERS; static int dec_yuv_buffers = IVTV_DEFAULT_DEC_YUV_BUFFERS; static int dec_vbi_buffers = IVTV_DEFAULT_DEC_VBI_BUFFERS; -static int ivtv_yuv_mode = 0; -static int ivtv_yuv_threshold=-1; +static int ivtv_yuv_mode; +static int ivtv_yuv_threshold = -1; static int ivtv_pci_latency = 1; -int ivtv_debug = 0; +int ivtv_debug; +static int tunertype = -1; static int newi2c = -1; module_param_array(tuner, int, &tuner_c, 0644); @@ -154,6 +155,7 @@ module_param(dec_mpg_buffers, int, 0644); module_param(dec_yuv_buffers, int, 0644); module_param(dec_vbi_buffers, int, 0644); +module_param(tunertype, int, 0644); module_param(newi2c, int, 0644); MODULE_PARM_DESC(tuner, "Tuner type selection,\n" @@ -188,11 +190,17 @@ MODULE_PARM_DESC(cardtype, "\t\t\t22 = ASUS Falcon2\n" "\t\t\t23 = AverMedia PVR-150 Plus\n" "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n" + "\t\t\t25 = AverMedia M104 (not yet working)\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); -MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); -MODULE_PARM_DESC(secam, "Set SECAM standard: B, G, H, D, K, L, LC"); -MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J, K"); +MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60"); +MODULE_PARM_DESC(secam, "Set SECAM standard: BGH, DK, L, LC"); +MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J (Japan), K (South Korea)"); +MODULE_PARM_DESC(tunertype, + "Specify tuner type:\n" + "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n" + "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n" + "\t\t\t-1 = Autodetect (default)\n"); MODULE_PARM_DESC(debug, "Debug level (bitmask). Default: 0\n" "\t\t\t 1/0x0001: warning\n" @@ -490,30 +498,35 @@ static v4l2_std_id ivtv_parse_std(struct ivtv *itv) { switch (pal[0]) { case '6': + tunertype = 0; return V4L2_STD_PAL_60; case 'b': case 'B': case 'g': case 'G': - return V4L2_STD_PAL_BG; case 'h': case 'H': - return V4L2_STD_PAL_H; + tunertype = 0; + return V4L2_STD_PAL_BG | V4L2_STD_PAL_H; case 'n': case 'N': + tunertype = 1; if (pal[1] == 'c' || pal[1] == 'C') return V4L2_STD_PAL_Nc; return V4L2_STD_PAL_N; case 'i': case 'I': + tunertype = 0; return V4L2_STD_PAL_I; case 'd': case 'D': case 'k': case 'K': + tunertype = 0; return V4L2_STD_PAL_DK; case 'M': case 'm': + tunertype = 1; return V4L2_STD_PAL_M; case '-': break; @@ -529,14 +542,17 @@ static v4l2_std_id ivtv_parse_std(struct ivtv *itv) case 'G': case 'h': case 'H': + tunertype = 0; return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H; case 'd': case 'D': case 'k': case 'K': + tunertype = 0; return V4L2_STD_SECAM_DK; case 'l': case 'L': + tunertype = 0; if (secam[1] == 'C' || secam[1] == 'c') return V4L2_STD_SECAM_LC; return V4L2_STD_SECAM_L; @@ -550,12 +566,15 @@ static v4l2_std_id ivtv_parse_std(struct ivtv *itv) switch (ntsc[0]) { case 'm': case 'M': + tunertype = 1; return V4L2_STD_NTSC_M; case 'j': case 'J': + tunertype = 1; return V4L2_STD_NTSC_M_JP; case 'k': case 'K': + tunertype = 1; return V4L2_STD_NTSC_M_KR; case '-': break; @@ -584,8 +603,13 @@ static void ivtv_process_options(struct ivtv *itv) itv->options.tuner = tuner[itv->num]; itv->options.radio = radio[itv->num]; itv->options.newi2c = newi2c; - + if (tunertype < -1 || tunertype > 1) { + IVTV_WARN("Invalid tunertype argument, will autodetect instead\n"); + tunertype = -1; + } itv->std = ivtv_parse_std(itv); + if (itv->std == 0 && tunertype >= 0) + itv->std = tunertype ? V4L2_STD_MN : (V4L2_STD_ALL & ~V4L2_STD_MN); itv->has_cx23415 = (itv->dev->device == PCI_DEVICE_ID_IVTV15); chipname = itv->has_cx23415 ? "cx23415" : "cx23416"; if (itv->options.cardtype == -1) { @@ -711,6 +735,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) itv->yuv_info.lace_mode = ivtv_yuv_mode; itv->yuv_info.lace_threshold = ivtv_yuv_threshold; itv->yuv_info.max_frames_buffered = 3; + itv->yuv_info.track_osd = 1; return 0; } @@ -828,6 +853,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *dev, return 0; } +#ifdef MODULE static u32 ivtv_request_module(struct ivtv *itv, u32 hw, const char *name, u32 id) { @@ -840,14 +866,16 @@ static u32 ivtv_request_module(struct ivtv *itv, u32 hw, IVTV_DEBUG_INFO("Loaded module %s\n", name); return hw; } +#endif static void ivtv_load_and_init_modules(struct ivtv *itv) { u32 hw = itv->card->hw_all; unsigned i; +#ifdef MODULE /* load modules */ -#ifndef CONFIG_VIDEO_TUNER +#ifndef CONFIG_MEDIA_TUNER hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER); #endif #ifndef CONFIG_VIDEO_CX25840 @@ -859,7 +887,9 @@ static void ivtv_load_and_init_modules(struct ivtv *itv) #ifndef CONFIG_VIDEO_SAA7127 hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127); #endif +#ifndef CONFIG_VIDEO_SAA717X hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X); +#endif #ifndef CONFIG_VIDEO_UPD64031A hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A); #endif @@ -884,6 +914,7 @@ static void ivtv_load_and_init_modules(struct ivtv *itv) #ifndef CONFIG_VIDEO_M52790 hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790); #endif +#endif /* check which i2c devices are actually found */ for (i = 0; i < 32; i++) { @@ -1022,7 +1053,7 @@ static int __devinit ivtv_probe(struct pci_dev *dev, IVTV_ENCODER_SIZE); if (!itv->enc_mem) { IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n"); - IVTV_ERR("or disabling CONFIG_HIMEM4G into the kernel would help\n"); + IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n"); retval = -ENOMEM; goto free_mem; } @@ -1034,7 +1065,7 @@ static int __devinit ivtv_probe(struct pci_dev *dev, IVTV_DECODER_SIZE); if (!itv->dec_mem) { IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n"); - IVTV_ERR("or disabling CONFIG_HIMEM4G into the kernel would help\n"); + IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n"); retval = -ENOMEM; goto free_mem; } @@ -1050,7 +1081,7 @@ static int __devinit ivtv_probe(struct pci_dev *dev, ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); if (!itv->reg_mem) { IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n"); - IVTV_ERR("or disabling CONFIG_HIMEM4G into the kernel would help\n"); + IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n"); retval = -ENOMEM; goto free_io; } @@ -1071,6 +1102,13 @@ static int __devinit ivtv_probe(struct pci_dev *dev, The PCI IDs are not always reliable. */ ivtv_process_eeprom(itv); } + if (itv->card->comment) + IVTV_INFO("%s", itv->card->comment); + if (itv->card->v4l2_capabilities == 0) { + /* card was detected but is not supported */ + retval = -ENODEV; + goto free_i2c; + } if (itv->std == 0) { itv->std = V4L2_STD_NTSC_M; @@ -1169,13 +1207,6 @@ static int __devinit ivtv_probe(struct pci_dev *dev, ivtv_call_i2c_clients(itv, VIDIOC_INT_S_STD_OUTPUT, &itv->std); } - retval = ivtv_streams_setup(itv); - if (retval) { - IVTV_ERR("Error %d setting up streams\n", retval); - goto free_i2c; - } - - IVTV_DEBUG_IRQ("Masking interrupts\n"); /* clear interrupt mask, effectively disabling interrupts */ ivtv_set_irq_mask(itv, 0xffffffff); @@ -1184,32 +1215,38 @@ static int __devinit ivtv_probe(struct pci_dev *dev, IRQF_SHARED | IRQF_DISABLED, itv->name, (void *)itv); if (retval) { IVTV_ERR("Failed to register irq %d\n", retval); - goto free_streams; + goto free_i2c; + } + + retval = ivtv_streams_setup(itv); + if (retval) { + IVTV_ERR("Error %d setting up streams\n", retval); + goto free_irq; } retval = ivtv_streams_register(itv); if (retval) { IVTV_ERR("Error %d registering devices\n", retval); - goto free_irq; + goto free_streams; } IVTV_INFO("Initialized card #%d: %s\n", itv->num, itv->card_name); return 0; - free_irq: +free_streams: + ivtv_streams_cleanup(itv, 1); +free_irq: free_irq(itv->dev->irq, (void *)itv); - free_streams: - ivtv_streams_cleanup(itv); - free_i2c: +free_i2c: exit_ivtv_i2c(itv); - free_io: +free_io: ivtv_iounmap(itv); - free_mem: +free_mem: release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); if (itv->has_cx23415) release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); - free_workqueue: +free_workqueue: destroy_workqueue(itv->irq_work_queues); - err: +err: if (retval == 0) retval = -ENODEV; IVTV_ERR("Error %d on initialization\n", retval); @@ -1340,7 +1377,7 @@ static void ivtv_remove(struct pci_dev *pci_dev) flush_workqueue(itv->irq_work_queues); destroy_workqueue(itv->irq_work_queues); - ivtv_streams_cleanup(itv); + ivtv_streams_cleanup(itv, 1); ivtv_udma_free(itv); exit_ivtv_i2c(itv); diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 536140f0c19..9d23b1efd36 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -259,6 +259,12 @@ struct ivtv_mailbox_data { /* Scatter-Gather array element, used in DMA transfers */ struct ivtv_sg_element { + __le32 src; + __le32 dst; + __le32 size; +}; + +struct ivtv_sg_host_element { u32 src; u32 dst; u32 size; @@ -349,8 +355,8 @@ struct ivtv_stream { u16 dma_xfer_cnt; /* Base Dev SG Array for cx23415/6 */ - struct ivtv_sg_element *sg_pending; - struct ivtv_sg_element *sg_processing; + struct ivtv_sg_host_element *sg_pending; + struct ivtv_sg_host_element *sg_processing; struct ivtv_sg_element *sg_dma; dma_addr_t sg_handle; int sg_pending_size; @@ -456,6 +462,8 @@ struct yuv_playback_info int v_filter_2; int h_filter; + u8 track_osd; /* Should yuv output track the OSD size & position */ + u32 osd_x_offset; u32 osd_y_offset; diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 6fb96f19a86..db813e071ce 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -219,7 +219,9 @@ static struct ivtv_buffer *ivtv_get_buffer(struct ivtv_stream *s, int non_block, /* Process pending program info updates and pending VBI data */ ivtv_update_pgm_info(itv); - if (jiffies - itv->dualwatch_jiffies > msecs_to_jiffies(1000)) { + if (time_after(jiffies, + itv->dualwatch_jiffies + + msecs_to_jiffies(1000))) { itv->dualwatch_jiffies = jiffies; ivtv_dualwatch(itv); } @@ -585,7 +587,7 @@ retry: since we may get here before the stream has been fully set-up */ if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { while (count >= itv->dma_data_req_size) { - if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) { + if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) { bytes_written += itv->dma_data_req_size; user_buf += itv->dma_data_req_size; count -= itv->dma_data_req_size; @@ -753,8 +755,10 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait) IVTV_DEBUG_HI_FILE("Encoder poll\n"); poll_wait(filp, &s->waitq, wait); - if (eof || s->q_full.length) + if (s->q_full.length || s->q_io.length) return POLLIN | POLLRDNORM; + if (eof) + return POLLHUP; return 0; } @@ -983,6 +987,8 @@ int ivtv_v4l2_open(struct inode *inode, struct file *filp) /* Find which card this open was on */ spin_lock(&ivtv_cards_lock); for (x = 0; itv == NULL && x < ivtv_cards_active; x++) { + if (ivtv_cards[x] == NULL) + continue; /* find out which stream this open was on */ for (y = 0; y < IVTV_MAX_STREAMS; y++) { s = &ivtv_cards[x]->streams[y]; diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c index 688cd385668..d8ac09f3cce 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.c +++ b/drivers/media/video/ivtv/ivtv-gpio.c @@ -128,20 +128,17 @@ int ivtv_reset_tuner_gpio(void *dev, int cmd, int value) { struct i2c_algo_bit_data *algo = dev; struct ivtv *itv = algo->data; - int curdir, curout; + u32 curout; if (cmd != XC2028_TUNER_RESET) return 0; IVTV_DEBUG_INFO("Resetting tuner\n"); curout = read_reg(IVTV_REG_GPIO_OUT); - curdir = read_reg(IVTV_REG_GPIO_DIR); - curdir |= (1 << 12); /* GPIO bit 12 */ - - curout &= ~(1 << 12); + curout &= ~(1 << itv->card->xceive_pin); write_reg(curout, IVTV_REG_GPIO_OUT); schedule_timeout_interruptible(msecs_to_jiffies(1)); - curout |= (1 << 12); + curout |= 1 << itv->card->xceive_pin; write_reg(curout, IVTV_REG_GPIO_OUT); schedule_timeout_interruptible(msecs_to_jiffies(1)); return 0; diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index fa5ab1eb180..32129f3ea83 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -136,7 +136,7 @@ static const u8 hw_addrs[] = { }; /* This array should match the IVTV_HW_ defines */ -static const char * const hw_drivernames[] = { +static const char * const hw_devicenames[] = { "cx25840", "saa7115", "saa7127", @@ -145,7 +145,7 @@ static const char * const hw_drivernames[] = { "wm8775", "cs53l32a", "tveeprom", - "saa7115", + "saa7114", "upd64031a", "upd64083", "saa717x", @@ -167,7 +167,7 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) return -1; id = hw_driverids[idx]; memset(&info, 0, sizeof(info)); - strcpy(info.driver_name, hw_drivernames[idx]); + strlcpy(info.type, hw_devicenames[idx], sizeof(info.type)); info.addr = hw_addrs[idx]; for (i = 0; itv->i2c_clients[i] && i < I2C_CLIENTS_MAX; i++) {} @@ -177,10 +177,16 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) } if (id != I2C_DRIVERID_TUNER) { - c = i2c_new_device(&itv->i2c_adap, &info); - if (c->driver == NULL) + if (id == I2C_DRIVERID_UPD64031A || + id == I2C_DRIVERID_UPD64083) { + unsigned short addrs[2] = { info.addr, I2C_CLIENT_END }; + + c = i2c_new_probed_device(&itv->i2c_adap, &info, addrs); + } else + c = i2c_new_device(&itv->i2c_adap, &info); + if (c && c->driver == NULL) i2c_unregister_device(c); - else + else if (c) itv->i2c_clients[i] = c; return itv->i2c_clients[i] ? 0 : -ENODEV; } @@ -650,7 +656,7 @@ static const char *ivtv_i2c_id_name(u32 id) for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) if (hw_driverids[i] == id) - return hw_drivernames[i]; + return hw_devicenames[i]; return "unknown device"; } @@ -661,7 +667,7 @@ static const char *ivtv_i2c_hw_name(u32 hw) for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) if (1 << i == hw) - return hw_drivernames[i]; + return hw_devicenames[i]; return "unknown device"; } @@ -763,7 +769,7 @@ int init_ivtv_i2c(struct ivtv *itv) * same size and GPIO must be the last entry. */ if (ARRAY_SIZE(hw_driverids) != ARRAY_SIZE(hw_addrs) || - ARRAY_SIZE(hw_drivernames) != ARRAY_SIZE(hw_addrs) || + ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs) || IVTV_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 1)) || hw_driverids[ARRAY_SIZE(hw_addrs) - 1]) { IVTV_ERR("Mismatched I2C hardware arrays\n"); diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index edef2a57961..26cc0f6699f 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -38,7 +38,7 @@ #include <linux/dvb/audio.h> #include <linux/i2c-id.h> -u16 service2vbi(int type) +u16 ivtv_service2vbi(int type) { switch (type) { case V4L2_SLICED_TELETEXT_B: @@ -88,7 +88,7 @@ static u16 select_service_from_set(int field, int line, u16 set, int is_pal) return 0; } -void expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) { u16 set = fmt->service_set; int f, l; @@ -115,7 +115,7 @@ static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) return set != 0; } -u16 get_service_set(struct v4l2_sliced_vbi_format *fmt) +u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt) { int f, l; u16 set = 0; @@ -243,20 +243,31 @@ static int ivtv_validate_speed(int cur_speed, int new_speed) int fact = new_speed < 0 ? -1 : 1; int s; - if (new_speed < 0) new_speed = -new_speed; - if (cur_speed < 0) cur_speed = -cur_speed; + if (cur_speed == 0) + cur_speed = 1000; + if (new_speed < 0) + new_speed = -new_speed; + if (cur_speed < 0) + cur_speed = -cur_speed; if (cur_speed <= new_speed) { - if (new_speed > 1500) return fact * 2000; - if (new_speed > 1000) return fact * 1500; + if (new_speed > 1500) + return fact * 2000; + if (new_speed > 1000) + return fact * 1500; } else { - if (new_speed >= 2000) return fact * 2000; - if (new_speed >= 1500) return fact * 1500; - if (new_speed >= 1000) return fact * 1000; - } - if (new_speed == 0) return 1000; - if (new_speed == 1 || new_speed == 1000) return fact * new_speed; + if (new_speed >= 2000) + return fact * 2000; + if (new_speed >= 1500) + return fact * 1500; + if (new_speed >= 1000) + return fact * 1000; + } + if (new_speed == 0) + return 1000; + if (new_speed == 1 || new_speed == 1000) + return fact * new_speed; s = new_speed; new_speed = 1000 / new_speed; @@ -455,7 +466,7 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm vbifmt->service_lines[0][23] = V4L2_SLICED_WSS_625; vbifmt->service_lines[0][16] = V4L2_SLICED_VPS; } - vbifmt->service_set = get_service_set(vbifmt); + vbifmt->service_set = ivtv_get_service_set(vbifmt); break; } @@ -470,12 +481,12 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm if (streamtype == IVTV_DEC_STREAM_TYPE_VBI) { vbifmt->service_set = itv->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; - expand_service_set(vbifmt, itv->is_50hz); + ivtv_expand_service_set(vbifmt, itv->is_50hz); break; } itv->video_dec_func(itv, VIDIOC_G_FMT, fmt); - vbifmt->service_set = get_service_set(vbifmt); + vbifmt->service_set = ivtv_get_service_set(vbifmt); break; } case V4L2_BUF_TYPE_VBI_OUTPUT: @@ -629,9 +640,9 @@ static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype, memset(vbifmt->reserved, 0, sizeof(vbifmt->reserved)); if (vbifmt->service_set) - expand_service_set(vbifmt, itv->is_50hz); + ivtv_expand_service_set(vbifmt, itv->is_50hz); set = check_service_set(vbifmt, itv->is_50hz); - vbifmt->service_set = get_service_set(vbifmt); + vbifmt->service_set = ivtv_get_service_set(vbifmt); if (!set_fmt) return 0; @@ -712,6 +723,7 @@ static int ivtv_debug_ioctls(struct file *filp, unsigned int cmd, void *arg) int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void *arg) { struct ivtv_open_id *id = NULL; + struct yuv_playback_info *yi = &itv->yuv_info; u32 data[CX2341X_MBOX_MAX_DATA]; int streamtype = 0; @@ -740,9 +752,9 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void struct v4l2_capability *vcap = arg; memset(vcap, 0, sizeof(*vcap)); - strcpy(vcap->driver, IVTV_DRIVER_NAME); /* driver name */ - strcpy(vcap->card, itv->card_name); /* card type */ - strcpy(vcap->bus_info, pci_name(itv->dev)); /* bus info... */ + strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); + strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); + strlcpy(vcap->bus_info, pci_name(itv->dev), sizeof(vcap->bus_info)); vcap->version = IVTV_DRIVER_VERSION; /* version */ vcap->capabilities = itv->v4l2_cap; /* capabilities */ @@ -827,8 +839,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void case VIDIOC_CROPCAP: { struct v4l2_cropcap *cropcap = arg; - if (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) + if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) return -EINVAL; cropcap->bounds.top = cropcap->bounds.left = 0; cropcap->bounds.width = 720; @@ -837,8 +848,14 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void cropcap->pixelaspect.numerator = itv->is_50hz ? 59 : 10; cropcap->pixelaspect.denominator = itv->is_50hz ? 54 : 11; } else if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { - cropcap->bounds.width = itv->yuv_info.osd_full_w; - cropcap->bounds.height = itv->yuv_info.osd_full_h; + if (yi->track_osd) { + cropcap->bounds.width = yi->osd_full_w; + cropcap->bounds.height = yi->osd_full_h; + } else { + cropcap->bounds.width = 720; + cropcap->bounds.height = + itv->is_out_50hz ? 576 : 480; + } cropcap->pixelaspect.numerator = itv->is_out_50hz ? 59 : 10; cropcap->pixelaspect.denominator = itv->is_out_50hz ? 54 : 11; } else { @@ -856,7 +873,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void if (crop->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { - itv->yuv_info.main_rect = crop->c; + yi->main_rect = crop->c; return 0; } else { if (!ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4, @@ -867,9 +884,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void } return -EINVAL; } - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - return itv->video_dec_func(itv, VIDIOC_S_CROP, arg); + return -EINVAL; } case VIDIOC_G_CROP: { @@ -878,14 +893,12 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void if (crop->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) - crop->c = itv->yuv_info.main_rect; + crop->c = yi->main_rect; else crop->c = itv->main_rect; return 0; } - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - return itv->video_dec_func(itv, VIDIOC_G_CROP, arg); + return -EINVAL; } case VIDIOC_ENUM_FMT: { @@ -1015,7 +1028,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void ivtv_std_60hz : ivtv_std_50hz; vs->index = idx; vs->id = enum_stds[idx].std; - strcpy(vs->name, enum_stds[idx].name); + strlcpy(vs->name, enum_stds[idx].name, sizeof(vs->name)); break; } @@ -1070,11 +1083,10 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void itv->main_rect.height = itv->params.height; ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4, 720, itv->main_rect.height, 0, 0); - itv->yuv_info.main_rect = itv->main_rect; + yi->main_rect = itv->main_rect; if (!itv->osd_info) { - itv->yuv_info.osd_full_w = 720; - itv->yuv_info.osd_full_h = - itv->is_out_50hz ? 576 : 480; + yi->osd_full_w = 720; + yi->osd_full_h = itv->is_out_50hz ? 576 : 480; } } break; @@ -1100,10 +1112,10 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void ivtv_call_i2c_clients(itv, VIDIOC_G_TUNER, vt); if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) { - strcpy(vt->name, "ivtv Radio Tuner"); + strlcpy(vt->name, "ivtv Radio Tuner", sizeof(vt->name)); vt->type = V4L2_TUNER_RADIO; } else { - strcpy(vt->name, "ivtv TV Tuner"); + strlcpy(vt->name, "ivtv TV Tuner", sizeof(vt->name)); vt->type = V4L2_TUNER_ANALOG_TV; } break; @@ -1272,6 +1284,8 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void else fb->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA; } + if (yi->track_osd) + fb->flags |= V4L2_FBUF_FLAG_OVERLAY; break; } @@ -1285,6 +1299,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void (fb->flags & (V4L2_FBUF_FLAG_LOCAL_ALPHA|V4L2_FBUF_FLAG_LOCAL_INV_ALPHA)) != 0; itv->osd_chroma_key_state = (fb->flags & V4L2_FBUF_FLAG_CHROMAKEY) != 0; ivtv_set_osd_alpha(itv); + yi->track_osd = (fb->flags & V4L2_FBUF_FLAG_OVERLAY) != 0; break; } @@ -1628,6 +1643,7 @@ static int ivtv_v4l2_do_ioctl(struct inode *inode, struct file *filp, if (ivtv_debug & IVTV_DBGFLG_IOCTL) { printk(KERN_INFO "ivtv%d ioctl: ", itv->num); v4l_printk_ioctl(cmd); + printk("\n"); } return ivtv_debug_ioctls(filp, cmd, arg); @@ -1671,6 +1687,7 @@ static int ivtv_v4l2_do_ioctl(struct inode *inode, struct file *filp, if (ivtv_debug & IVTV_DBGFLG_IOCTL) { printk(KERN_INFO "ivtv%d ioctl: ", itv->num); v4l_printk_ioctl(cmd); + printk("\n"); } return ivtv_v4l2_ioctls(itv, filp, cmd, arg); @@ -1684,6 +1701,7 @@ static int ivtv_v4l2_do_ioctl(struct inode *inode, struct file *filp, if (ivtv_debug & IVTV_DBGFLG_IOCTL) { printk(KERN_INFO "ivtv%d ioctl: ", itv->num); v4l_printk_ioctl(cmd); + printk("\n"); } return ivtv_control_ioctls(itv, cmd, arg); diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/video/ivtv/ivtv-ioctl.h index a03351b6853..4e67f0ed1fc 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.h +++ b/drivers/media/video/ivtv/ivtv-ioctl.h @@ -21,9 +21,9 @@ #ifndef IVTV_IOCTL_H #define IVTV_IOCTL_H -u16 service2vbi(int type); -void expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal); -u16 get_service_set(struct v4l2_sliced_vbi_format *fmt); +u16 ivtv_service2vbi(int type); +void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal); +u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt); int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg); int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void *arg); diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index 65604dde972..fba150a6cd2 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -231,14 +231,14 @@ static void dma_post(struct ivtv_stream *s) struct ivtv_buffer *buf = NULL; struct list_head *p; u32 offset; - u32 *u32buf; + __le32 *u32buf; int x = 0; IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA", s->name, s->dma_offset); list_for_each(p, &s->q_dma.list) { buf = list_entry(p, struct ivtv_buffer, list); - u32buf = (u32 *)buf->buf; + u32buf = (__le32 *)buf->buf; /* Sync Buffer */ ivtv_buf_sync_for_cpu(s, buf); @@ -384,6 +384,8 @@ static void ivtv_dma_enc_start_xfer(struct ivtv_stream *s) ivtv_stream_sync_for_device(s); write_reg(s->sg_handle, IVTV_REG_ENCDMAADDR); write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x02, IVTV_REG_DMAXFER); + itv->dma_timer.expires = jiffies + msecs_to_jiffies(300); + add_timer(&itv->dma_timer); } static void ivtv_dma_dec_start_xfer(struct ivtv_stream *s) @@ -398,6 +400,8 @@ static void ivtv_dma_dec_start_xfer(struct ivtv_stream *s) ivtv_stream_sync_for_device(s); write_reg(s->sg_handle, IVTV_REG_DECDMAADDR); write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x01, IVTV_REG_DMAXFER); + itv->dma_timer.expires = jiffies + msecs_to_jiffies(300); + add_timer(&itv->dma_timer); } /* start the encoder DMA */ @@ -440,7 +444,7 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s) } s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; @@ -459,8 +463,6 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s) ivtv_dma_enc_start_xfer(s); set_bit(IVTV_F_I_DMA, &itv->i_flags); itv->cur_dma_stream = s->type; - itv->dma_timer.expires = jiffies + msecs_to_jiffies(100); - add_timer(&itv->dma_timer); } } @@ -471,7 +473,7 @@ static void ivtv_dma_dec_start(struct ivtv_stream *s) if (s->q_predma.bytesused) ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused); s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; @@ -481,8 +483,6 @@ static void ivtv_dma_dec_start(struct ivtv_stream *s) ivtv_dma_dec_start_xfer(s); set_bit(IVTV_F_I_DMA, &itv->i_flags); itv->cur_dma_stream = s->type; - itv->dma_timer.expires = jiffies + msecs_to_jiffies(100); - add_timer(&itv->dma_timer); } static void ivtv_irq_dma_read(struct ivtv *itv) @@ -492,10 +492,11 @@ static void ivtv_irq_dma_read(struct ivtv *itv) int hw_stream_type = 0; IVTV_DEBUG_HI_IRQ("DEC DMA READ\n"); - if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) && itv->cur_dma_stream < 0) { - del_timer(&itv->dma_timer); + + del_timer(&itv->dma_timer); + + if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) && itv->cur_dma_stream < 0) return; - } if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { s = &itv->streams[itv->cur_dma_stream]; @@ -543,7 +544,6 @@ static void ivtv_irq_dma_read(struct ivtv *itv) } wake_up(&s->waitq); } - del_timer(&itv->dma_timer); clear_bit(IVTV_F_I_UDMA, &itv->i_flags); clear_bit(IVTV_F_I_DMA, &itv->i_flags); itv->cur_dma_stream = -1; @@ -557,10 +557,12 @@ static void ivtv_irq_enc_dma_complete(struct ivtv *itv) ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, data); IVTV_DEBUG_HI_IRQ("ENC DMA COMPLETE %x %d (%d)\n", data[0], data[1], itv->cur_dma_stream); - if (itv->cur_dma_stream < 0) { - del_timer(&itv->dma_timer); + + del_timer(&itv->dma_timer); + + if (itv->cur_dma_stream < 0) return; - } + s = &itv->streams[itv->cur_dma_stream]; ivtv_stream_sync_for_cpu(s); @@ -585,7 +587,6 @@ static void ivtv_irq_enc_dma_complete(struct ivtv *itv) ivtv_dma_enc_start_xfer(s); return; } - del_timer(&itv->dma_timer); clear_bit(IVTV_F_I_DMA, &itv->i_flags); itv->cur_dma_stream = -1; dma_post(s); diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/video/ivtv/ivtv-mailbox.c index 13a6c374d2d..1b5c0ac09a8 100644 --- a/drivers/media/video/ivtv/ivtv-mailbox.c +++ b/drivers/media/video/ivtv/ivtv-mailbox.c @@ -177,7 +177,8 @@ static int get_mailbox(struct ivtv *itv, struct ivtv_mailbox_data *mbdata, int f /* Sleep before a retry, if not atomic */ if (!(flags & API_NO_WAIT_MB)) { - if (jiffies - then > msecs_to_jiffies(10*retries)) + if (time_after(jiffies, + then + msecs_to_jiffies(10*retries))) break; ivtv_msleep_timeout(10, 0); } @@ -244,7 +245,9 @@ static int ivtv_api_call(struct ivtv *itv, int cmd, int args, u32 data[]) data, then just return 0 as there is no need to issue this command again. Just an optimization to prevent unnecessary use of mailboxes. */ if (itv->api_cache[cmd].last_jiffies && - jiffies - itv->api_cache[cmd].last_jiffies < msecs_to_jiffies(1800000) && + time_before(jiffies, + itv->api_cache[cmd].last_jiffies + + msecs_to_jiffies(1800000)) && !memcmp(data, itv->api_cache[cmd].data, sizeof(itv->api_cache[cmd].data))) { itv->api_cache[cmd].last_jiffies = jiffies; return 0; @@ -299,7 +302,7 @@ static int ivtv_api_call(struct ivtv *itv, int cmd, int args, u32 data[]) } } while (!(readl(&mbox->flags) & IVTV_MBOX_FIRMWARE_DONE)) { - if (jiffies - then > api_timeout) { + if (time_after(jiffies, then + api_timeout)) { IVTV_DEBUG_WARN("Could not get result (%s)\n", api_info[cmd].name); /* reset the mailbox, but it is likely too late already */ write_sync(0, &mbox->flags); @@ -311,7 +314,7 @@ static int ivtv_api_call(struct ivtv *itv, int cmd, int args, u32 data[]) else ivtv_msleep_timeout(1, 0); } - if (jiffies - then > msecs_to_jiffies(100)) + if (time_after(jiffies, then + msecs_to_jiffies(100))) IVTV_DEBUG_WARN("%s took %u jiffies\n", api_info[cmd].name, jiffies_to_msecs(jiffies - then)); diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c index 39a21671324..71bd13e22e2 100644 --- a/drivers/media/video/ivtv/ivtv-queue.c +++ b/drivers/media/video/ivtv/ivtv-queue.c @@ -51,7 +51,7 @@ void ivtv_queue_init(struct ivtv_queue *q) void ivtv_enqueue(struct ivtv_stream *s, struct ivtv_buffer *buf, struct ivtv_queue *q) { - unsigned long flags = 0; + unsigned long flags; /* clear the buffer if it is going to be enqueued to the free queue */ if (q == &s->q_free) { @@ -71,7 +71,7 @@ void ivtv_enqueue(struct ivtv_stream *s, struct ivtv_buffer *buf, struct ivtv_qu struct ivtv_buffer *ivtv_dequeue(struct ivtv_stream *s, struct ivtv_queue *q) { struct ivtv_buffer *buf = NULL; - unsigned long flags = 0; + unsigned long flags; spin_lock_irqsave(&s->qlock, flags); if (!list_empty(&q->list)) { @@ -193,7 +193,7 @@ void ivtv_flush_queues(struct ivtv_stream *s) int ivtv_stream_alloc(struct ivtv_stream *s) { struct ivtv *itv = s->itv; - int SGsize = sizeof(struct ivtv_sg_element) * s->buffers; + int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers; int i; if (s->buffers == 0) @@ -203,14 +203,14 @@ int ivtv_stream_alloc(struct ivtv_stream *s) s->dma != PCI_DMA_NONE ? "DMA " : "", s->name, s->buffers, s->buf_size, s->buffers * s->buf_size / 1024); - s->sg_pending = kzalloc(SGsize, GFP_KERNEL); + s->sg_pending = kzalloc(SGsize, GFP_KERNEL|__GFP_NOWARN); if (s->sg_pending == NULL) { IVTV_ERR("Could not allocate sg_pending for %s stream\n", s->name); return -ENOMEM; } s->sg_pending_size = 0; - s->sg_processing = kzalloc(SGsize, GFP_KERNEL); + s->sg_processing = kzalloc(SGsize, GFP_KERNEL|__GFP_NOWARN); if (s->sg_processing == NULL) { IVTV_ERR("Could not allocate sg_processing for %s stream\n", s->name); kfree(s->sg_pending); @@ -219,7 +219,8 @@ int ivtv_stream_alloc(struct ivtv_stream *s) } s->sg_processing_size = 0; - s->sg_dma = kzalloc(sizeof(struct ivtv_sg_element), GFP_KERNEL); + s->sg_dma = kzalloc(sizeof(struct ivtv_sg_element), + GFP_KERNEL|__GFP_NOWARN); if (s->sg_dma == NULL) { IVTV_ERR("Could not allocate sg_dma for %s stream\n", s->name); kfree(s->sg_pending); @@ -235,11 +236,12 @@ int ivtv_stream_alloc(struct ivtv_stream *s) /* allocate stream buffers. Initially all buffers are in q_free. */ for (i = 0; i < s->buffers; i++) { - struct ivtv_buffer *buf = kzalloc(sizeof(struct ivtv_buffer), GFP_KERNEL); + struct ivtv_buffer *buf = kzalloc(sizeof(struct ivtv_buffer), + GFP_KERNEL|__GFP_NOWARN); if (buf == NULL) break; - buf->buf = kmalloc(s->buf_size + 256, GFP_KERNEL); + buf->buf = kmalloc(s->buf_size + 256, GFP_KERNEL|__GFP_NOWARN); if (buf->buf == NULL) { kfree(buf); break; diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 24d98ecf35a..c854285a437 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -44,23 +44,25 @@ #include "ivtv-streams.h" static const struct file_operations ivtv_v4l2_enc_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_enc_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_enc_poll, }; static const struct file_operations ivtv_v4l2_dec_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_dec_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_dec_poll, }; #define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */ @@ -244,7 +246,7 @@ int ivtv_streams_setup(struct ivtv *itv) return 0; /* One or more streams could not be initialized. Clean 'em all up. */ - ivtv_streams_cleanup(itv); + ivtv_streams_cleanup(itv, 0); return -ENOMEM; } @@ -304,12 +306,12 @@ int ivtv_streams_register(struct ivtv *itv) return 0; /* One or more streams could not be initialized. Clean 'em all up. */ - ivtv_streams_cleanup(itv); + ivtv_streams_cleanup(itv, 1); return -ENOMEM; } /* Unregister v4l2 devices */ -void ivtv_streams_cleanup(struct ivtv *itv) +void ivtv_streams_cleanup(struct ivtv *itv, int unregister) { int type; @@ -322,8 +324,11 @@ void ivtv_streams_cleanup(struct ivtv *itv) continue; ivtv_stream_free(&itv->streams[type]); - /* Unregister device */ - video_unregister_device(vdev); + /* Unregister or release device */ + if (unregister) + video_unregister_device(vdev); + else + video_device_release(vdev); } } @@ -768,7 +773,8 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end) /* wait 2s for EOS interrupt */ while (!test_bit(IVTV_F_I_EOS, &itv->i_flags) && - jiffies < then + msecs_to_jiffies (2000)) { + time_before(jiffies, + then + msecs_to_jiffies(2000))) { schedule_timeout(msecs_to_jiffies(10)); } diff --git a/drivers/media/video/ivtv/ivtv-streams.h b/drivers/media/video/ivtv/ivtv-streams.h index 3d76a415fbd..a653a513641 100644 --- a/drivers/media/video/ivtv/ivtv-streams.h +++ b/drivers/media/video/ivtv/ivtv-streams.h @@ -23,7 +23,7 @@ int ivtv_streams_setup(struct ivtv *itv); int ivtv_streams_register(struct ivtv *itv); -void ivtv_streams_cleanup(struct ivtv *itv); +void ivtv_streams_cleanup(struct ivtv *itv, int unregister); /* Capture related */ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s); diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c index c151bcf5519..71798f0da27 100644 --- a/drivers/media/video/ivtv/ivtv-vbi.c +++ b/drivers/media/video/ivtv/ivtv-vbi.c @@ -169,7 +169,8 @@ static void copy_vbi_data(struct ivtv *itv, int lines, u32 pts_stamp) linemask[0] |= (1 << l); else linemask[1] |= (1 << (l - 32)); - dst[sd + 12 + line * 43] = service2vbi(itv->vbi.sliced_data[i].id); + dst[sd + 12 + line * 43] = + ivtv_service2vbi(itv->vbi.sliced_data[i].id); memcpy(dst + sd + 12 + line * 43 + 1, itv->vbi.sliced_data[i].data, 42); line++; } diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index 0f1d4cc4b4d..442f43f11b7 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -22,7 +22,7 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 2 +#define IVTV_DRIVER_VERSION_MINOR 3 #define IVTV_DRIVER_VERSION_PATCHLEVEL 0 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 85183480a22..3092ff1d00a 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -718,9 +718,11 @@ static u32 ivtv_yuv_window_setup(struct ivtv *itv, struct yuv_frame_info *f) f->src_w -= (osd_scale * osd_crop) >> 16; } - /* The OSD can be moved. Track to it */ - f->dst_x += itv->yuv_info.osd_x_offset; - f->dst_y += itv->yuv_info.osd_y_offset; + if (itv->yuv_info.track_osd) { + /* The OSD can be moved. Track to it */ + f->dst_x += itv->yuv_info.osd_x_offset; + f->dst_y += itv->yuv_info.osd_y_offset; + } /* Width & height for both src & dst must be even. Same for coordinates. */ @@ -792,11 +794,19 @@ void ivtv_yuv_work_handler(struct ivtv *itv) IVTV_DEBUG_YUV("Update yuv registers for frame %d\n", frame); f = yi->new_frame_info[frame]; - /* Update the osd pan info */ - f.pan_x = yi->osd_x_pan; - f.pan_y = yi->osd_y_pan; - f.vis_w = yi->osd_vis_w; - f.vis_h = yi->osd_vis_h; + if (yi->track_osd) { + /* Snapshot the osd pan info */ + f.pan_x = yi->osd_x_pan; + f.pan_y = yi->osd_y_pan; + f.vis_w = yi->osd_vis_w; + f.vis_h = yi->osd_vis_h; + } else { + /* Not tracking the osd, so assume full screen */ + f.pan_x = 0; + f.pan_y = 0; + f.vis_w = 720; + f.vis_h = yi->decode_height; + } /* Calculate the display window coordinates. Exit if nothing left */ if (!(yuv_update = ivtv_yuv_window_setup(itv, &f))) @@ -898,7 +908,7 @@ static void ivtv_yuv_init(struct ivtv *itv) } /* We need a buffer for blanking when Y plane is offset - non-fatal if we can't get one */ - yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL); + yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL|__GFP_NOWARN); if (yi->blanking_ptr) { yi->blanking_dmaptr = pci_map_single(itv->dev, yi->blanking_ptr, 720*16, PCI_DMA_TODEVICE); } else { @@ -914,7 +924,7 @@ static void ivtv_yuv_init(struct ivtv *itv) } /* Get next available yuv buffer on PVR350 */ -void ivtv_yuv_next_free(struct ivtv *itv) +static void ivtv_yuv_next_free(struct ivtv *itv) { int draw, display; struct yuv_playback_info *yi = &itv->yuv_info; @@ -937,7 +947,7 @@ void ivtv_yuv_next_free(struct ivtv *itv) } /* Set up frame according to ivtv_dma_frame parameters */ -void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +static void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) { struct yuv_playback_info *yi = &itv->yuv_info; u8 frame = yi->draw_frame; @@ -965,12 +975,6 @@ void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) /* Are we going to offset the Y plane */ nf->offset_y = (nf->tru_h + nf->src_x < 512 - 16) ? 1 : 0; - /* Snapshot the osd pan info */ - nf->pan_x = yi->osd_x_pan; - nf->pan_y = yi->osd_y_pan; - nf->vis_w = yi->osd_vis_w; - nf->vis_h = yi->osd_vis_h; - nf->update = 0; nf->interlaced_y = 0; nf->interlaced_uv = 0; @@ -1042,7 +1046,7 @@ void ivtv_yuv_frame_complete(struct ivtv *itv) (itv->yuv_info.draw_frame + 1) % IVTV_YUV_BUFFERS); } -int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) { DEFINE_WAIT(wait); int rc = 0; @@ -1094,8 +1098,8 @@ void ivtv_yuv_setup_stream_frame(struct ivtv *itv) ivtv_yuv_next_free(itv); /* Copy V4L2 parameters to an ivtv_dma_frame struct... */ - dma_args.y_source = 0L; - dma_args.uv_source = 0L; + dma_args.y_source = NULL; + dma_args.uv_source = NULL; dma_args.src.left = 0; dma_args.src.top = 0; dma_args.src.width = yi->v4l2_src_w; @@ -1112,7 +1116,7 @@ void ivtv_yuv_setup_stream_frame(struct ivtv *itv) } /* Attempt to dma a frame from a user buffer */ -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src) +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src) { struct yuv_playback_info *yi = &itv->yuv_info; struct ivtv_dma_frame dma_args; diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h index 2fe5f125076..ca5173fbf00 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.h +++ b/drivers/media/video/ivtv/ivtv-yuv.h @@ -35,7 +35,7 @@ extern const u32 yuv_offset[IVTV_YUV_BUFFERS]; int ivtv_yuv_filter_check(struct ivtv *itv); void ivtv_yuv_setup_stream_frame(struct ivtv *itv); -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src); +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src); void ivtv_yuv_frame_complete(struct ivtv *itv); int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args); void ivtv_yuv_close(struct ivtv *itv); diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 3b23fc05f7c..73be154f7f0 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -532,7 +532,7 @@ static int ivtvfb_get_fix(struct ivtv *itv, struct fb_fix_screeninfo *fix) IVTVFB_DEBUG_INFO("ivtvfb_get_fix\n"); memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - strcpy(fix->id, "cx23415 TV out"); + strlcpy(fix->id, "cx23415 TV out", sizeof(fix->id)); fix->smem_start = oi->video_pbase; fix->smem_len = oi->video_buffer_size; fix->type = FB_TYPE_PACKED_PIXELS; @@ -948,7 +948,8 @@ static int ivtvfb_init_vidmode(struct ivtv *itv) } /* Allocate the pseudo palette */ - oi->ivtvfb_info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); + oi->ivtvfb_info.pseudo_palette = + kmalloc(sizeof(u32) * 16, GFP_KERNEL|__GFP_NOWARN); if (!oi->ivtvfb_info.pseudo_palette) { IVTVFB_ERR("abort, unable to alloc pseudo pallete\n"); @@ -1056,7 +1057,8 @@ static int ivtvfb_init_card(struct ivtv *itv) return -EBUSY; } - itv->osd_info = kzalloc(sizeof(struct osd_info), GFP_ATOMIC); + itv->osd_info = kzalloc(sizeof(struct osd_info), + GFP_ATOMIC|__GFP_NOWARN); if (itv->osd_info == NULL) { IVTVFB_ERR("Failed to allocate memory for osd_info\n"); return -ENOMEM; diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c index d4bf14c284e..8e0160d275c 100644 --- a/drivers/media/video/m52790.c +++ b/drivers/media/video/m52790.c @@ -126,7 +126,8 @@ static int m52790_command(struct i2c_client *client, unsigned int cmd, /* i2c implementation */ -static int m52790_probe(struct i2c_client *client) +static int m52790_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct m52790_state *state; @@ -134,8 +135,6 @@ static int m52790_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - snprintf(client->name, sizeof(client->name) - 1, "m52790"); - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); @@ -158,11 +157,18 @@ static int m52790_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static const struct i2c_device_id m52790_id[] = { + { "m52790", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, m52790_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "m52790", .driverid = I2C_DRIVERID_M52790, .command = m52790_command, .probe = m52790_probe, .remove = m52790_remove, + .id_table = m52790_id, }; diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 3d51fa0a52b..e7ccbc895d7 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -42,15 +42,10 @@ #include <linux/meye.h> MODULE_AUTHOR("Stelian Pop <stelian@popies.net>"); -MODULE_DESCRIPTION("v4l/v4l2 driver for the MotionEye camera"); +MODULE_DESCRIPTION("v4l2 driver for the MotionEye camera"); MODULE_LICENSE("GPL"); MODULE_VERSION(MEYE_DRIVER_VERSION); -/* force usage of V4L1 API */ -static int forcev4l1; /* = 0 */ -module_param(forcev4l1, int, 0644); -MODULE_PARM_DESC(forcev4l1, "force use of V4L1 instead of V4L2"); - /* number of grab buffers */ static unsigned int gbuffers = 2; module_param(gbuffers, int, 0444); @@ -789,7 +784,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) { u32 v; int reqnr; - static int sequence = 0; + static int sequence; v = mchip_read(MCHIP_MM_INTA); @@ -876,795 +871,735 @@ static int meye_release(struct inode *inode, struct file *file) return 0; } -static int meye_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) +static int meyeioc_g_params(struct meye_params *p) { - switch (cmd) { + *p = meye.params; + return 0; +} - case VIDIOCGCAP: { - struct video_capability *b = arg; - strcpy(b->name,meye.video_dev->name); - b->type = VID_TYPE_CAPTURE; - b->channels = 1; - b->audios = 0; - b->maxwidth = 640; - b->maxheight = 480; - b->minwidth = 320; - b->minheight = 240; - break; - } +static int meyeioc_s_params(struct meye_params *jp) +{ + if (jp->subsample > 1) + return -EINVAL; - case VIDIOCGCHAN: { - struct video_channel *v = arg; - v->flags = 0; - v->tuners = 0; - v->type = VIDEO_TYPE_CAMERA; - if (v->channel != 0) - return -EINVAL; - strcpy(v->name,"Camera"); - break; - } + if (jp->quality > 10) + return -EINVAL; - case VIDIOCSCHAN: { - struct video_channel *v = arg; - if (v->channel != 0) - return -EINVAL; - break; - } + if (jp->sharpness > 63 || jp->agc > 63 || jp->picture > 63) + return -EINVAL; - case VIDIOCGPICT: { - struct video_picture *p = arg; - *p = meye.picture; - break; - } + if (jp->framerate > 31) + return -EINVAL; - case VIDIOCSPICT: { - struct video_picture *p = arg; - if (p->depth != 16) - return -EINVAL; - if (p->palette != VIDEO_PALETTE_YUV422 && p->palette != VIDEO_PALETTE_YUYV) - return -EINVAL; - mutex_lock(&meye.lock); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, - p->brightness >> 10); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAHUE, - p->hue >> 10); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACOLOR, - p->colour >> 10); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACONTRAST, - p->contrast >> 10); - meye.picture = *p; - mutex_unlock(&meye.lock); - break; - } + mutex_lock(&meye.lock); - case VIDIOCSYNC: { - int *i = arg; - int unused; + if (meye.params.subsample != jp->subsample || + meye.params.quality != jp->quality) + mchip_hic_stop(); /* need restart */ + + meye.params = *jp; + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS, + meye.params.sharpness); + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, + meye.params.agc); + sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, + meye.params.picture); + mutex_unlock(&meye.lock); - if (*i < 0 || *i >= gbuffers) - return -EINVAL; + return 0; +} - mutex_lock(&meye.lock); +static int meyeioc_qbuf_capt(int *nb) +{ + if (!meye.grab_fbuffer) + return -EINVAL; - switch (meye.grab_buffer[*i].state) { + if (*nb >= gbuffers) + return -EINVAL; - case MEYE_BUF_UNUSED: - mutex_unlock(&meye.lock); - return -EINVAL; - case MEYE_BUF_USING: - if (file->f_flags & O_NONBLOCK) { - mutex_unlock(&meye.lock); - return -EAGAIN; - } - if (wait_event_interruptible(meye.proc_list, - (meye.grab_buffer[*i].state != MEYE_BUF_USING))) { - mutex_unlock(&meye.lock); - return -EINTR; - } - /* fall through */ - case MEYE_BUF_DONE: - meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - kfifo_get(meye.doneq, (unsigned char *)&unused, sizeof(int)); - } - mutex_unlock(&meye.lock); - break; + if (*nb < 0) { + /* stop capture */ + mchip_hic_stop(); + return 0; } - case VIDIOCMCAPTURE: { - struct video_mmap *vm = arg; - int restart = 0; - - if (vm->frame >= gbuffers || vm->frame < 0) - return -EINVAL; - if (vm->format != VIDEO_PALETTE_YUV422 && vm->format != VIDEO_PALETTE_YUYV) - return -EINVAL; - if (vm->height * vm->width * 2 > gbufsize) - return -EINVAL; - if (!meye.grab_fbuffer) - return -EINVAL; - if (meye.grab_buffer[vm->frame].state != MEYE_BUF_UNUSED) - return -EBUSY; - - mutex_lock(&meye.lock); - if (vm->width == 640 && vm->height == 480) { - if (meye.params.subsample) { - meye.params.subsample = 0; - restart = 1; - } - } else if (vm->width == 320 && vm->height == 240) { - if (!meye.params.subsample) { - meye.params.subsample = 1; - restart = 1; - } - } else { - mutex_unlock(&meye.lock); - return -EINVAL; - } + if (meye.grab_buffer[*nb].state != MEYE_BUF_UNUSED) + return -EBUSY; - if (restart || meye.mchip_mode != MCHIP_HIC_MODE_CONT_OUT) - mchip_continuous_start(); - meye.grab_buffer[vm->frame].state = MEYE_BUF_USING; - kfifo_put(meye.grabq, (unsigned char *)&vm->frame, sizeof(int)); - mutex_unlock(&meye.lock); - break; - } + mutex_lock(&meye.lock); - case VIDIOCGMBUF: { - struct video_mbuf *vm = arg; - int i; + if (meye.mchip_mode != MCHIP_HIC_MODE_CONT_COMP) + mchip_cont_compression_start(); - memset(vm, 0 , sizeof(*vm)); - vm->size = gbufsize * gbuffers; - vm->frames = gbuffers; - for (i = 0; i < gbuffers; i++) - vm->offsets[i] = i * gbufsize; - break; - } + meye.grab_buffer[*nb].state = MEYE_BUF_USING; + kfifo_put(meye.grabq, (unsigned char *)nb, sizeof(int)); + mutex_unlock(&meye.lock); - case MEYEIOC_G_PARAMS: { - struct meye_params *p = arg; - *p = meye.params; - break; - } + return 0; +} - case MEYEIOC_S_PARAMS: { - struct meye_params *jp = arg; - if (jp->subsample > 1) - return -EINVAL; - if (jp->quality > 10) - return -EINVAL; - if (jp->sharpness > 63 || jp->agc > 63 || jp->picture > 63) - return -EINVAL; - if (jp->framerate > 31) - return -EINVAL; - mutex_lock(&meye.lock); - if (meye.params.subsample != jp->subsample || - meye.params.quality != jp->quality) - mchip_hic_stop(); /* need restart */ - meye.params = *jp; - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS, - meye.params.sharpness); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, - meye.params.agc); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, - meye.params.picture); - mutex_unlock(&meye.lock); - break; - } +static int meyeioc_sync(struct file *file, void *fh, int *i) +{ + int unused; - case MEYEIOC_QBUF_CAPT: { - int *nb = arg; - - if (!meye.grab_fbuffer) - return -EINVAL; - if (*nb >= gbuffers) - return -EINVAL; - if (*nb < 0) { - /* stop capture */ - mchip_hic_stop(); - return 0; - } - if (meye.grab_buffer[*nb].state != MEYE_BUF_UNUSED) - return -EBUSY; - mutex_lock(&meye.lock); - if (meye.mchip_mode != MCHIP_HIC_MODE_CONT_COMP) - mchip_cont_compression_start(); - meye.grab_buffer[*nb].state = MEYE_BUF_USING; - kfifo_put(meye.grabq, (unsigned char *)nb, sizeof(int)); + if (*i < 0 || *i >= gbuffers) + return -EINVAL; + + mutex_lock(&meye.lock); + switch (meye.grab_buffer[*i].state) { + + case MEYE_BUF_UNUSED: mutex_unlock(&meye.lock); - break; + return -EINVAL; + case MEYE_BUF_USING: + if (file->f_flags & O_NONBLOCK) { + mutex_unlock(&meye.lock); + return -EAGAIN; + } + if (wait_event_interruptible(meye.proc_list, + (meye.grab_buffer[*i].state != MEYE_BUF_USING))) { + mutex_unlock(&meye.lock); + return -EINTR; + } + /* fall through */ + case MEYE_BUF_DONE: + meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; + kfifo_get(meye.doneq, (unsigned char *)&unused, sizeof(int)); } + *i = meye.grab_buffer[*i].size; + mutex_unlock(&meye.lock); + return 0; +} - case MEYEIOC_SYNC: { - int *i = arg; - int unused; +static int meyeioc_stillcapt(void) +{ + if (!meye.grab_fbuffer) + return -EINVAL; - if (*i < 0 || *i >= gbuffers) - return -EINVAL; + if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) + return -EBUSY; - mutex_lock(&meye.lock); - switch (meye.grab_buffer[*i].state) { + mutex_lock(&meye.lock); + meye.grab_buffer[0].state = MEYE_BUF_USING; + mchip_take_picture(); - case MEYE_BUF_UNUSED: - mutex_unlock(&meye.lock); - return -EINVAL; - case MEYE_BUF_USING: - if (file->f_flags & O_NONBLOCK) { - mutex_unlock(&meye.lock); - return -EAGAIN; - } - if (wait_event_interruptible(meye.proc_list, - (meye.grab_buffer[*i].state != MEYE_BUF_USING))) { - mutex_unlock(&meye.lock); - return -EINTR; - } - /* fall through */ - case MEYE_BUF_DONE: - meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - kfifo_get(meye.doneq, (unsigned char *)&unused, sizeof(int)); - } - *i = meye.grab_buffer[*i].size; - mutex_unlock(&meye.lock); - break; - } + mchip_get_picture(meye.grab_fbuffer, + mchip_hsize() * mchip_vsize() * 2); - case MEYEIOC_STILLCAPT: { + meye.grab_buffer[0].state = MEYE_BUF_DONE; + mutex_unlock(&meye.lock); - if (!meye.grab_fbuffer) - return -EINVAL; - if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) - return -EBUSY; - mutex_lock(&meye.lock); - meye.grab_buffer[0].state = MEYE_BUF_USING; + return 0; +} + +static int meyeioc_stilljcapt(int *len) +{ + if (!meye.grab_fbuffer) + return -EINVAL; + + if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) + return -EBUSY; + + mutex_lock(&meye.lock); + meye.grab_buffer[0].state = MEYE_BUF_USING; + *len = -1; + + while (*len == -1) { mchip_take_picture(); - mchip_get_picture( - meye.grab_fbuffer, - mchip_hsize() * mchip_vsize() * 2); - meye.grab_buffer[0].state = MEYE_BUF_DONE; - mutex_unlock(&meye.lock); - break; + *len = mchip_compress_frame(meye.grab_fbuffer, gbufsize); } - case MEYEIOC_STILLJCAPT: { - int *len = arg; - - if (!meye.grab_fbuffer) - return -EINVAL; - if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) - return -EBUSY; - mutex_lock(&meye.lock); - meye.grab_buffer[0].state = MEYE_BUF_USING; - *len = -1; - while (*len == -1) { - mchip_take_picture(); - *len = mchip_compress_frame(meye.grab_fbuffer, gbufsize); - } - meye.grab_buffer[0].state = MEYE_BUF_DONE; - mutex_unlock(&meye.lock); - break; - } + meye.grab_buffer[0].state = MEYE_BUF_DONE; + mutex_unlock(&meye.lock); + return 0; +} - case VIDIOC_QUERYCAP: { - struct v4l2_capability *cap = arg; +static int vidioc_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + memset(cap, 0, sizeof(*cap)); + strcpy(cap->driver, "meye"); + strcpy(cap->card, "meye"); + sprintf(cap->bus_info, "PCI:%s", pci_name(meye.mchip_dev)); - if (forcev4l1) - return -EINVAL; + cap->version = (MEYE_DRIVER_MAJORVERSION << 8) + + MEYE_DRIVER_MINORVERSION; - memset(cap, 0, sizeof(*cap)); - strcpy(cap->driver, "meye"); - strcpy(cap->card, "meye"); - sprintf(cap->bus_info, "PCI:%s", pci_name(meye.mchip_dev)); - cap->version = (MEYE_DRIVER_MAJORVERSION << 8) + - MEYE_DRIVER_MINORVERSION; - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_STREAMING; - break; - } + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING; + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; - case VIDIOC_ENUMINPUT: { - struct v4l2_input *i = arg; + memset(i, 0, sizeof(*i)); + i->index = 0; + strcpy(i->name, "Camera"); + i->type = V4L2_INPUT_TYPE_CAMERA; - if (i->index != 0) - return -EINVAL; - memset(i, 0, sizeof(*i)); - i->index = 0; - strcpy(i->name, "Camera"); - i->type = V4L2_INPUT_TYPE_CAMERA; + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int i) +{ + if (i != 0) + return -EINVAL; + + return 0; +} + +static int vidioc_queryctrl(struct file *file, void *fh, + struct v4l2_queryctrl *c) +{ + switch (c->id) { + + case V4L2_CID_BRIGHTNESS: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Brightness"); + c->minimum = 0; + c->maximum = 63; + c->step = 1; + c->default_value = 32; + c->flags = 0; + break; + case V4L2_CID_HUE: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Hue"); + c->minimum = 0; + c->maximum = 63; + c->step = 1; + c->default_value = 32; + c->flags = 0; + break; + case V4L2_CID_CONTRAST: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Contrast"); + c->minimum = 0; + c->maximum = 63; + c->step = 1; + c->default_value = 32; + c->flags = 0; + break; + case V4L2_CID_SATURATION: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Saturation"); + c->minimum = 0; + c->maximum = 63; + c->step = 1; + c->default_value = 32; + c->flags = 0; + break; + case V4L2_CID_AGC: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Agc"); + c->minimum = 0; + c->maximum = 63; + c->step = 1; + c->default_value = 48; + c->flags = 0; break; + case V4L2_CID_MEYE_SHARPNESS: + case V4L2_CID_SHARPNESS: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Sharpness"); + c->minimum = 0; + c->maximum = 63; + c->step = 1; + c->default_value = 32; + + /* Continue to report legacy private SHARPNESS ctrl but + * say it is disabled in preference to ctrl in the spec + */ + c->flags = (c->id == V4L2_CID_SHARPNESS) ? 0 : + V4L2_CTRL_FLAG_DISABLED; + break; + case V4L2_CID_PICTURE: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Picture"); + c->minimum = 0; + c->maximum = 63; + c->step = 1; + c->default_value = 0; + c->flags = 0; + break; + case V4L2_CID_JPEGQUAL: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "JPEG quality"); + c->minimum = 0; + c->maximum = 10; + c->step = 1; + c->default_value = 8; + c->flags = 0; + break; + case V4L2_CID_FRAMERATE: + c->type = V4L2_CTRL_TYPE_INTEGER; + strcpy(c->name, "Framerate"); + c->minimum = 0; + c->maximum = 31; + c->step = 1; + c->default_value = 0; + c->flags = 0; + break; + default: + return -EINVAL; } - case VIDIOC_G_INPUT: { - int *i = arg; + return 0; +} - *i = 0; +static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) +{ + mutex_lock(&meye.lock); + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, c->value); + meye.picture.brightness = c->value << 10; + break; + case V4L2_CID_HUE: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERAHUE, c->value); + meye.picture.hue = c->value << 10; + break; + case V4L2_CID_CONTRAST: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERACONTRAST, c->value); + meye.picture.contrast = c->value << 10; + break; + case V4L2_CID_SATURATION: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERACOLOR, c->value); + meye.picture.colour = c->value << 10; + break; + case V4L2_CID_AGC: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERAAGC, c->value); + meye.params.agc = c->value; + break; + case V4L2_CID_SHARPNESS: + case V4L2_CID_MEYE_SHARPNESS: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERASHARPNESS, c->value); + meye.params.sharpness = c->value; + break; + case V4L2_CID_PICTURE: + sony_pic_camera_command( + SONY_PIC_COMMAND_SETCAMERAPICTURE, c->value); + meye.params.picture = c->value; + break; + case V4L2_CID_JPEGQUAL: + meye.params.quality = c->value; + break; + case V4L2_CID_FRAMERATE: + meye.params.framerate = c->value; break; + default: + mutex_unlock(&meye.lock); + return -EINVAL; } + mutex_unlock(&meye.lock); - case VIDIOC_S_INPUT: { - int *i = arg; + return 0; +} - if (*i != 0) - return -EINVAL; +static int vidioc_g_ctrl(struct file *file, void *fh, struct v4l2_control *c) +{ + mutex_lock(&meye.lock); + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + c->value = meye.picture.brightness >> 10; + break; + case V4L2_CID_HUE: + c->value = meye.picture.hue >> 10; + break; + case V4L2_CID_CONTRAST: + c->value = meye.picture.contrast >> 10; + break; + case V4L2_CID_SATURATION: + c->value = meye.picture.colour >> 10; + break; + case V4L2_CID_AGC: + c->value = meye.params.agc; + break; + case V4L2_CID_SHARPNESS: + case V4L2_CID_MEYE_SHARPNESS: + c->value = meye.params.sharpness; break; + case V4L2_CID_PICTURE: + c->value = meye.params.picture; + break; + case V4L2_CID_JPEGQUAL: + c->value = meye.params.quality; + break; + case V4L2_CID_FRAMERATE: + c->value = meye.params.framerate; + break; + default: + mutex_unlock(&meye.lock); + return -EINVAL; } + mutex_unlock(&meye.lock); - case VIDIOC_QUERYCTRL: { - struct v4l2_queryctrl *c = arg; + return 0; +} - switch (c->id) { +static int vidioc_enum_fmt_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + if (f->index > 1) + return -EINVAL; - case V4L2_CID_BRIGHTNESS: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Brightness"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_HUE: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Hue"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_CONTRAST: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Contrast"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_SATURATION: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Saturation"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_AGC: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Agc"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 48; - c->flags = 0; - break; - case V4L2_CID_SHARPNESS: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Sharpness"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_PICTURE: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Picture"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 0; - c->flags = 0; - break; - case V4L2_CID_JPEGQUAL: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "JPEG quality"); - c->minimum = 0; - c->maximum = 10; - c->step = 1; - c->default_value = 8; - c->flags = 0; - break; - case V4L2_CID_FRAMERATE: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Framerate"); - c->minimum = 0; - c->maximum = 31; - c->step = 1; - c->default_value = 0; - c->flags = 0; - break; - default: - return -EINVAL; - } - break; + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (f->index == 0) { + /* standard YUV 422 capture */ + memset(f, 0, sizeof(*f)); + f->index = 0; + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->flags = 0; + strcpy(f->description, "YUV422"); + f->pixelformat = V4L2_PIX_FMT_YUYV; + } else { + /* compressed MJPEG capture */ + memset(f, 0, sizeof(*f)); + f->index = 1; + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->flags = V4L2_FMT_FLAG_COMPRESSED; + strcpy(f->description, "MJPEG"); + f->pixelformat = V4L2_PIX_FMT_MJPEG; } - case VIDIOC_S_CTRL: { - struct v4l2_control *c = arg; + return 0; +} - mutex_lock(&meye.lock); - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, c->value); - meye.picture.brightness = c->value << 10; - break; - case V4L2_CID_HUE: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAHUE, c->value); - meye.picture.hue = c->value << 10; - break; - case V4L2_CID_CONTRAST: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERACONTRAST, c->value); - meye.picture.contrast = c->value << 10; - break; - case V4L2_CID_SATURATION: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERACOLOR, c->value); - meye.picture.colour = c->value << 10; - break; - case V4L2_CID_AGC: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAAGC, c->value); - meye.params.agc = c->value; - break; - case V4L2_CID_SHARPNESS: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERASHARPNESS, c->value); - meye.params.sharpness = c->value; - break; - case V4L2_CID_PICTURE: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAPICTURE, c->value); - meye.params.picture = c->value; - break; - case V4L2_CID_JPEGQUAL: - meye.params.quality = c->value; - break; - case V4L2_CID_FRAMERATE: - meye.params.framerate = c->value; - break; - default: - mutex_unlock(&meye.lock); - return -EINVAL; - } - mutex_unlock(&meye.lock); - break; +static int vidioc_try_fmt_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && + f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) + return -EINVAL; + + if (f->fmt.pix.field != V4L2_FIELD_ANY && + f->fmt.pix.field != V4L2_FIELD_NONE) + return -EINVAL; + + f->fmt.pix.field = V4L2_FIELD_NONE; + + if (f->fmt.pix.width <= 320) { + f->fmt.pix.width = 320; + f->fmt.pix.height = 240; + } else { + f->fmt.pix.width = 640; + f->fmt.pix.height = 480; } - case VIDIOC_G_CTRL: { - struct v4l2_control *c = arg; + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.height * + f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = 0; + f->fmt.pix.priv = 0; - mutex_lock(&meye.lock); - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - c->value = meye.picture.brightness >> 10; - break; - case V4L2_CID_HUE: - c->value = meye.picture.hue >> 10; - break; - case V4L2_CID_CONTRAST: - c->value = meye.picture.contrast >> 10; - break; - case V4L2_CID_SATURATION: - c->value = meye.picture.colour >> 10; - break; - case V4L2_CID_AGC: - c->value = meye.params.agc; - break; - case V4L2_CID_SHARPNESS: - c->value = meye.params.sharpness; - break; - case V4L2_CID_PICTURE: - c->value = meye.params.picture; - break; - case V4L2_CID_JPEGQUAL: - c->value = meye.params.quality; - break; - case V4L2_CID_FRAMERATE: - c->value = meye.params.framerate; - break; - default: - mutex_unlock(&meye.lock); - return -EINVAL; - } - mutex_unlock(&meye.lock); + return 0; +} + +static int vidioc_g_fmt_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(&f->fmt.pix, 0, sizeof(struct v4l2_pix_format)); + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + switch (meye.mchip_mode) { + case MCHIP_HIC_MODE_CONT_OUT: + default: + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + break; + case MCHIP_HIC_MODE_CONT_COMP: + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MJPEG; break; } - case VIDIOC_ENUM_FMT: { - struct v4l2_fmtdesc *f = arg; - - if (f->index > 1) - return -EINVAL; - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (f->index == 0) { - /* standard YUV 422 capture */ - memset(f, 0, sizeof(*f)); - f->index = 0; - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - f->flags = 0; - strcpy(f->description, "YUV422"); - f->pixelformat = V4L2_PIX_FMT_YUYV; - } else { - /* compressed MJPEG capture */ - memset(f, 0, sizeof(*f)); - f->index = 1; - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - f->flags = V4L2_FMT_FLAG_COMPRESSED; - strcpy(f->description, "MJPEG"); - f->pixelformat = V4L2_PIX_FMT_MJPEG; - } - break; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.width = mchip_hsize(); + f->fmt.pix.height = mchip_vsize(); + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.height * + f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = 0; + f->fmt.pix.priv = 0; + + return 0; +} + +static int vidioc_s_fmt_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && + f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) + return -EINVAL; + + if (f->fmt.pix.field != V4L2_FIELD_ANY && + f->fmt.pix.field != V4L2_FIELD_NONE) + return -EINVAL; + + f->fmt.pix.field = V4L2_FIELD_NONE; + mutex_lock(&meye.lock); + + if (f->fmt.pix.width <= 320) { + f->fmt.pix.width = 320; + f->fmt.pix.height = 240; + meye.params.subsample = 1; + } else { + f->fmt.pix.width = 640; + f->fmt.pix.height = 480; + meye.params.subsample = 0; } - case VIDIOC_TRY_FMT: { - struct v4l2_format *f = arg; - - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && - f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) - return -EINVAL; - if (f->fmt.pix.field != V4L2_FIELD_ANY && - f->fmt.pix.field != V4L2_FIELD_NONE) - return -EINVAL; - f->fmt.pix.field = V4L2_FIELD_NONE; - if (f->fmt.pix.width <= 320) { - f->fmt.pix.width = 320; - f->fmt.pix.height = 240; - } else { - f->fmt.pix.width = 640; - f->fmt.pix.height = 480; - } - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * - f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = 0; - f->fmt.pix.priv = 0; + switch (f->fmt.pix.pixelformat) { + case V4L2_PIX_FMT_YUYV: + meye.mchip_mode = MCHIP_HIC_MODE_CONT_OUT; + break; + case V4L2_PIX_FMT_MJPEG: + meye.mchip_mode = MCHIP_HIC_MODE_CONT_COMP; break; } - case VIDIOC_G_FMT: { - struct v4l2_format *f = arg; + mutex_unlock(&meye.lock); + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.height * + f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = 0; + f->fmt.pix.priv = 0; - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - memset(&f->fmt.pix, 0, sizeof(struct v4l2_pix_format)); - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - switch (meye.mchip_mode) { - case MCHIP_HIC_MODE_CONT_OUT: - default: - f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; - break; - case MCHIP_HIC_MODE_CONT_COMP: - f->fmt.pix.pixelformat = V4L2_PIX_FMT_MJPEG; - break; - } - f->fmt.pix.field = V4L2_FIELD_NONE; - f->fmt.pix.width = mchip_hsize(); - f->fmt.pix.height = mchip_vsize(); - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * - f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = 0; - f->fmt.pix.priv = 0; - break; - } + return 0; +} - case VIDIOC_S_FMT: { - struct v4l2_format *f = arg; - - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && - f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) - return -EINVAL; - if (f->fmt.pix.field != V4L2_FIELD_ANY && - f->fmt.pix.field != V4L2_FIELD_NONE) - return -EINVAL; - f->fmt.pix.field = V4L2_FIELD_NONE; - mutex_lock(&meye.lock); - if (f->fmt.pix.width <= 320) { - f->fmt.pix.width = 320; - f->fmt.pix.height = 240; - meye.params.subsample = 1; - } else { - f->fmt.pix.width = 640; - f->fmt.pix.height = 480; - meye.params.subsample = 0; - } - switch (f->fmt.pix.pixelformat) { - case V4L2_PIX_FMT_YUYV: - meye.mchip_mode = MCHIP_HIC_MODE_CONT_OUT; - break; - case V4L2_PIX_FMT_MJPEG: - meye.mchip_mode = MCHIP_HIC_MODE_CONT_COMP; - break; - } - mutex_unlock(&meye.lock); - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * - f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = 0; - f->fmt.pix.priv = 0; +static int vidioc_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *req) +{ + int i; - break; - } + if (req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; - case VIDIOC_REQBUFS: { - struct v4l2_requestbuffers *req = arg; - int i; + if (req->memory != V4L2_MEMORY_MMAP) + return -EINVAL; - if (req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (req->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - if (meye.grab_fbuffer && req->count == gbuffers) { - /* already allocated, no modifications */ - break; - } - mutex_lock(&meye.lock); - if (meye.grab_fbuffer) { - for (i = 0; i < gbuffers; i++) - if (meye.vma_use_count[i]) { - mutex_unlock(&meye.lock); - return -EINVAL; - } - rvfree(meye.grab_fbuffer, gbuffers * gbufsize); - meye.grab_fbuffer = NULL; - } - gbuffers = max(2, min((int)req->count, MEYE_MAX_BUFNBRS)); - req->count = gbuffers; - meye.grab_fbuffer = rvmalloc(gbuffers * gbufsize); - if (!meye.grab_fbuffer) { - printk(KERN_ERR "meye: v4l framebuffer allocation" - " failed\n"); - mutex_unlock(&meye.lock); - return -ENOMEM; - } - for (i = 0; i < gbuffers; i++) - meye.vma_use_count[i] = 0; - mutex_unlock(&meye.lock); - break; + if (meye.grab_fbuffer && req->count == gbuffers) { + /* already allocated, no modifications */ + return 0; } - case VIDIOC_QUERYBUF: { - struct v4l2_buffer *buf = arg; - int index = buf->index; - - if (index < 0 || index >= gbuffers) - return -EINVAL; - memset(buf, 0, sizeof(*buf)); - buf->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - buf->index = index; - buf->bytesused = meye.grab_buffer[index].size; - buf->flags = V4L2_BUF_FLAG_MAPPED; - if (meye.grab_buffer[index].state == MEYE_BUF_USING) - buf->flags |= V4L2_BUF_FLAG_QUEUED; - if (meye.grab_buffer[index].state == MEYE_BUF_DONE) - buf->flags |= V4L2_BUF_FLAG_DONE; - buf->field = V4L2_FIELD_NONE; - buf->timestamp = meye.grab_buffer[index].timestamp; - buf->sequence = meye.grab_buffer[index].sequence; - buf->memory = V4L2_MEMORY_MMAP; - buf->m.offset = index * gbufsize; - buf->length = gbufsize; - break; + mutex_lock(&meye.lock); + if (meye.grab_fbuffer) { + for (i = 0; i < gbuffers; i++) + if (meye.vma_use_count[i]) { + mutex_unlock(&meye.lock); + return -EINVAL; + } + rvfree(meye.grab_fbuffer, gbuffers * gbufsize); + meye.grab_fbuffer = NULL; } - case VIDIOC_QBUF: { - struct v4l2_buffer *buf = arg; - - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - if (buf->index < 0 || buf->index >= gbuffers) - return -EINVAL; - if (meye.grab_buffer[buf->index].state != MEYE_BUF_UNUSED) - return -EINVAL; - mutex_lock(&meye.lock); - buf->flags |= V4L2_BUF_FLAG_QUEUED; - buf->flags &= ~V4L2_BUF_FLAG_DONE; - meye.grab_buffer[buf->index].state = MEYE_BUF_USING; - kfifo_put(meye.grabq, (unsigned char *)&buf->index, sizeof(int)); + gbuffers = max(2, min((int)req->count, MEYE_MAX_BUFNBRS)); + req->count = gbuffers; + meye.grab_fbuffer = rvmalloc(gbuffers * gbufsize); + + if (!meye.grab_fbuffer) { + printk(KERN_ERR "meye: v4l framebuffer allocation" + " failed\n"); mutex_unlock(&meye.lock); - break; + return -ENOMEM; } - case VIDIOC_DQBUF: { - struct v4l2_buffer *buf = arg; - int reqnr; + for (i = 0; i < gbuffers; i++) + meye.vma_use_count[i] = 0; - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; + mutex_unlock(&meye.lock); - mutex_lock(&meye.lock); - if (kfifo_len(meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { - mutex_unlock(&meye.lock); - return -EAGAIN; - } - if (wait_event_interruptible(meye.proc_list, - kfifo_len(meye.doneq) != 0) < 0) { - mutex_unlock(&meye.lock); - return -EINTR; - } - if (!kfifo_get(meye.doneq, (unsigned char *)&reqnr, - sizeof(int))) { - mutex_unlock(&meye.lock); - return -EBUSY; - } - if (meye.grab_buffer[reqnr].state != MEYE_BUF_DONE) { - mutex_unlock(&meye.lock); - return -EINVAL; - } - buf->index = reqnr; - buf->bytesused = meye.grab_buffer[reqnr].size; - buf->flags = V4L2_BUF_FLAG_MAPPED; - buf->field = V4L2_FIELD_NONE; - buf->timestamp = meye.grab_buffer[reqnr].timestamp; - buf->sequence = meye.grab_buffer[reqnr].sequence; - buf->memory = V4L2_MEMORY_MMAP; - buf->m.offset = reqnr * gbufsize; - buf->length = gbufsize; - meye.grab_buffer[reqnr].state = MEYE_BUF_UNUSED; + return 0; +} + +static int vidioc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + int index = buf->index; + + if (index < 0 || index >= gbuffers) + return -EINVAL; + + memset(buf, 0, sizeof(*buf)); + + buf->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf->index = index; + buf->bytesused = meye.grab_buffer[index].size; + buf->flags = V4L2_BUF_FLAG_MAPPED; + + if (meye.grab_buffer[index].state == MEYE_BUF_USING) + buf->flags |= V4L2_BUF_FLAG_QUEUED; + + if (meye.grab_buffer[index].state == MEYE_BUF_DONE) + buf->flags |= V4L2_BUF_FLAG_DONE; + + buf->field = V4L2_FIELD_NONE; + buf->timestamp = meye.grab_buffer[index].timestamp; + buf->sequence = meye.grab_buffer[index].sequence; + buf->memory = V4L2_MEMORY_MMAP; + buf->m.offset = index * gbufsize; + buf->length = gbufsize; + + return 0; +} + +static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (buf->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (buf->index < 0 || buf->index >= gbuffers) + return -EINVAL; + + if (meye.grab_buffer[buf->index].state != MEYE_BUF_UNUSED) + return -EINVAL; + + mutex_lock(&meye.lock); + buf->flags |= V4L2_BUF_FLAG_QUEUED; + buf->flags &= ~V4L2_BUF_FLAG_DONE; + meye.grab_buffer[buf->index].state = MEYE_BUF_USING; + kfifo_put(meye.grabq, (unsigned char *)&buf->index, sizeof(int)); + mutex_unlock(&meye.lock); + + return 0; +} + +static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + int reqnr; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (buf->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + mutex_lock(&meye.lock); + + if (kfifo_len(meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { mutex_unlock(&meye.lock); - break; + return -EAGAIN; } - case VIDIOC_STREAMON: { - mutex_lock(&meye.lock); - switch (meye.mchip_mode) { - case MCHIP_HIC_MODE_CONT_OUT: - mchip_continuous_start(); - break; - case MCHIP_HIC_MODE_CONT_COMP: - mchip_cont_compression_start(); - break; - default: - mutex_unlock(&meye.lock); - return -EINVAL; - } + if (wait_event_interruptible(meye.proc_list, + kfifo_len(meye.doneq) != 0) < 0) { mutex_unlock(&meye.lock); - break; + return -EINTR; } - case VIDIOC_STREAMOFF: { - int i; + if (!kfifo_get(meye.doneq, (unsigned char *)&reqnr, + sizeof(int))) { + mutex_unlock(&meye.lock); + return -EBUSY; + } - mutex_lock(&meye.lock); - mchip_hic_stop(); - kfifo_reset(meye.grabq); - kfifo_reset(meye.doneq); - for (i = 0; i < MEYE_MAX_BUFNBRS; i++) - meye.grab_buffer[i].state = MEYE_BUF_UNUSED; + if (meye.grab_buffer[reqnr].state != MEYE_BUF_DONE) { mutex_unlock(&meye.lock); - break; + return -EINVAL; } - /* - * XXX what about private snapshot ioctls ? - * Do they need to be converted to V4L2 ? - */ + buf->index = reqnr; + buf->bytesused = meye.grab_buffer[reqnr].size; + buf->flags = V4L2_BUF_FLAG_MAPPED; + buf->field = V4L2_FIELD_NONE; + buf->timestamp = meye.grab_buffer[reqnr].timestamp; + buf->sequence = meye.grab_buffer[reqnr].sequence; + buf->memory = V4L2_MEMORY_MMAP; + buf->m.offset = reqnr * gbufsize; + buf->length = gbufsize; + meye.grab_buffer[reqnr].state = MEYE_BUF_UNUSED; + mutex_unlock(&meye.lock); + + return 0; +} +static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) +{ + mutex_lock(&meye.lock); + + switch (meye.mchip_mode) { + case MCHIP_HIC_MODE_CONT_OUT: + mchip_continuous_start(); + break; + case MCHIP_HIC_MODE_CONT_COMP: + mchip_cont_compression_start(); + break; default: - return -ENOIOCTLCMD; + mutex_unlock(&meye.lock); + return -EINVAL; } + mutex_unlock(&meye.lock); + return 0; } -static int meye_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) { - return video_usercopy(inode, file, cmd, arg, meye_do_ioctl); + mutex_lock(&meye.lock); + mchip_hic_stop(); + kfifo_reset(meye.grabq); + kfifo_reset(meye.doneq); + + for (i = 0; i < MEYE_MAX_BUFNBRS; i++) + meye.grab_buffer[i].state = MEYE_BUF_UNUSED; + + mutex_unlock(&meye.lock); + return 0; +} + +static int vidioc_default(struct file *file, void *fh, int cmd, void *arg) +{ + switch (cmd) { + case MEYEIOC_G_PARAMS: + return meyeioc_g_params((struct meye_params *) arg); + + case MEYEIOC_S_PARAMS: + return meyeioc_s_params((struct meye_params *) arg); + + case MEYEIOC_QBUF_CAPT: + return meyeioc_qbuf_capt((int *) arg); + + case MEYEIOC_SYNC: + return meyeioc_sync(file, fh, (int *) arg); + + case MEYEIOC_STILLCAPT: + return meyeioc_stillcapt(); + + case MEYEIOC_STILLJCAPT: + return meyeioc_stilljcapt((int *) arg); + + default: + return -EINVAL; + } + } static unsigned int meye_poll(struct file *file, poll_table *wait) @@ -1752,8 +1687,10 @@ static const struct file_operations meye_fops = { .open = meye_open, .release = meye_release, .mmap = meye_mmap, - .ioctl = meye_ioctl, + .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .poll = meye_poll, .llseek = no_llseek, }; @@ -1765,6 +1702,24 @@ static struct video_device meye_template = { .fops = &meye_fops, .release = video_device_release, .minor = -1, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, + .vidioc_try_fmt_cap = vidioc_try_fmt_cap, + .vidioc_g_fmt_cap = vidioc_g_fmt_cap, + .vidioc_s_fmt_cap = vidioc_s_fmt_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_default = vidioc_default, }; #ifdef CONFIG_PM diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index 7a11f3159e3..310dbaba55f 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -366,7 +366,7 @@ int msp_sleep(struct msp_state *state, int timeout) } /* ------------------------------------------------------------------------ */ -#ifdef CONFIG_VIDEO_V4L1 +#ifdef CONFIG_VIDEO_ALLOW_V4L1 static int msp_mode_v4l2_to_v4l1(int rxsubchans, int audmode) { if (rxsubchans == V4L2_TUNER_SUB_MONO) @@ -514,7 +514,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) /* --- v4l ioctls --- */ /* take care: bttv does userspace copying, we'll get a kernel pointer here... */ -#ifdef CONFIG_VIDEO_V4L1 +#ifdef CONFIG_VIDEO_ALLOW_V4L1 case VIDIOCGAUDIO: { struct video_audio *va = arg; @@ -805,7 +805,7 @@ static int msp_resume(struct i2c_client *client) /* ----------------------------------------------------------------------- */ -static int msp_probe(struct i2c_client *client) +static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct msp_state *state; int (*thread_func)(void *data) = NULL; @@ -815,7 +815,8 @@ static int msp_probe(struct i2c_client *client) int msp_product, msp_prod_hi, msp_prod_lo; int msp_rom; - snprintf(client->name, sizeof(client->name) - 1, "msp3400"); + if (!id) + strlcpy(client->name, "msp3400", sizeof(client->name)); if (msp_reset(client) == -1) { v4l_dbg(1, msp_debug, client, "msp3400 not found\n"); @@ -864,9 +865,6 @@ static int msp_probe(struct i2c_client *client) msp_revision = (state->rev1 & 0x0f) + '@'; msp_hard = ((state->rev1 >> 8) & 0xff) + '@'; msp_rom = state->rev2 & 0x1f; - snprintf(client->name, sizeof(client->name), "MSP%d4%02d%c-%c%d", - msp_family, msp_product, - msp_revision, msp_hard, msp_rom); /* Rev B=2, C=3, D=4, G=7 */ state->ident = msp_family * 10000 + 4000 + msp_product * 10 + msp_revision - '@'; @@ -931,7 +929,9 @@ static int msp_probe(struct i2c_client *client) } /* hello world :-) */ - v4l_info(client, "%s found @ 0x%x (%s)\n", client->name, + v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n", + msp_family, msp_product, + msp_revision, msp_hard, msp_rom, client->addr << 1, client->adapter->name); v4l_info(client, "%s ", client->name); if (state->has_nicam && state->has_radio) @@ -987,6 +987,12 @@ static int msp_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static const struct i2c_device_id msp_id[] = { + { "msp3400", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, msp_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "msp3400", .driverid = I2C_DRIVERID_MSP3400, @@ -995,6 +1001,7 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .remove = msp_remove, .suspend = msp_suspend, .resume = msp_resume, + .id_table = msp_id, }; diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index 61ec794a737..7f556859279 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -833,11 +833,6 @@ static int msp34xxg_modus(struct i2c_client *client) v4l_dbg(1, msp_debug, client, "selected radio modus\n"); return 0x0001; } - - if (state->v4l2_std & V4L2_STD_PAL) { - v4l_dbg(1, msp_debug, client, "selected PAL modus\n"); - return 0x7001; - } if (state->v4l2_std == V4L2_STD_NTSC_M_JP) { v4l_dbg(1, msp_debug, client, "selected M (EIA-J) modus\n"); return 0x4001; @@ -846,15 +841,15 @@ static int msp34xxg_modus(struct i2c_client *client) v4l_dbg(1, msp_debug, client, "selected M (A2) modus\n"); return 0x0001; } + if (state->v4l2_std == V4L2_STD_SECAM_L) { + v4l_dbg(1, msp_debug, client, "selected SECAM-L modus\n"); + return 0x6001; + } if (state->v4l2_std & V4L2_STD_MN) { v4l_dbg(1, msp_debug, client, "selected M (BTSC) modus\n"); return 0x2001; } - if (state->v4l2_std & V4L2_STD_SECAM) { - v4l_dbg(1, msp_debug, client, "selected SECAM modus\n"); - return 0x6001; - } - return 0x0001; + return 0x7001; } static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c new file mode 100644 index 00000000000..ee43499544c --- /dev/null +++ b/drivers/media/video/mt9m001.c @@ -0,0 +1,727 @@ +/* + * Driver for MT9M001 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/gpio.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> +#include <media/soc_camera.h> + +/* mt9m001 i2c address 0x5d + * The platform has to define i2c_board_info + * and call i2c_register_board_info() */ + +/* mt9m001 selected register addresses */ +#define MT9M001_CHIP_VERSION 0x00 +#define MT9M001_ROW_START 0x01 +#define MT9M001_COLUMN_START 0x02 +#define MT9M001_WINDOW_HEIGHT 0x03 +#define MT9M001_WINDOW_WIDTH 0x04 +#define MT9M001_HORIZONTAL_BLANKING 0x05 +#define MT9M001_VERTICAL_BLANKING 0x06 +#define MT9M001_OUTPUT_CONTROL 0x07 +#define MT9M001_SHUTTER_WIDTH 0x09 +#define MT9M001_FRAME_RESTART 0x0b +#define MT9M001_SHUTTER_DELAY 0x0c +#define MT9M001_RESET 0x0d +#define MT9M001_READ_OPTIONS1 0x1e +#define MT9M001_READ_OPTIONS2 0x20 +#define MT9M001_GLOBAL_GAIN 0x35 +#define MT9M001_CHIP_ENABLE 0xF1 + +static const struct soc_camera_data_format mt9m001_colour_formats[] = { + /* Order important: first natively supported, + * second supported with a GPIO extender */ + { + .name = "Bayer (sRGB) 10 bit", + .depth = 10, + .fourcc = V4L2_PIX_FMT_SBGGR16, + .colorspace = V4L2_COLORSPACE_SRGB, + }, { + .name = "Bayer (sRGB) 8 bit", + .depth = 8, + .fourcc = V4L2_PIX_FMT_SBGGR8, + .colorspace = V4L2_COLORSPACE_SRGB, + } +}; + +static const struct soc_camera_data_format mt9m001_monochrome_formats[] = { + /* Order important - see above */ + { + .name = "Monochrome 10 bit", + .depth = 10, + .fourcc = V4L2_PIX_FMT_Y16, + }, { + .name = "Monochrome 8 bit", + .depth = 8, + .fourcc = V4L2_PIX_FMT_GREY, + }, +}; + +struct mt9m001 { + struct i2c_client *client; + struct soc_camera_device icd; + int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */ + int switch_gpio; + unsigned char autoexposure; + unsigned char datawidth; +}; + +static int reg_read(struct soc_camera_device *icd, const u8 reg) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + struct i2c_client *client = mt9m001->client; + s32 data = i2c_smbus_read_word_data(client, reg); + return data < 0 ? data : swab16(data); +} + +static int reg_write(struct soc_camera_device *icd, const u8 reg, + const u16 data) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + return i2c_smbus_write_word_data(mt9m001->client, reg, swab16(data)); +} + +static int reg_set(struct soc_camera_device *icd, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(icd, reg); + if (ret < 0) + return ret; + return reg_write(icd, reg, ret | data); +} + +static int reg_clear(struct soc_camera_device *icd, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(icd, reg); + if (ret < 0) + return ret; + return reg_write(icd, reg, ret & ~data); +} + +static int mt9m001_init(struct soc_camera_device *icd) +{ + int ret; + + /* Disable chip, synchronous option update */ + dev_dbg(icd->vdev->dev, "%s\n", __func__); + + ret = reg_write(icd, MT9M001_RESET, 1); + if (ret >= 0) + ret = reg_write(icd, MT9M001_RESET, 0); + if (ret >= 0) + ret = reg_write(icd, MT9M001_OUTPUT_CONTROL, 0); + + return ret >= 0 ? 0 : -EIO; +} + +static int mt9m001_release(struct soc_camera_device *icd) +{ + /* Disable the chip */ + reg_write(icd, MT9M001_OUTPUT_CONTROL, 0); + return 0; +} + +static int mt9m001_start_capture(struct soc_camera_device *icd) +{ + /* Switch to master "normal" mode */ + if (reg_write(icd, MT9M001_OUTPUT_CONTROL, 2) < 0) + return -EIO; + return 0; +} + +static int mt9m001_stop_capture(struct soc_camera_device *icd) +{ + /* Stop sensor readout */ + if (reg_write(icd, MT9M001_OUTPUT_CONTROL, 0) < 0) + return -EIO; + return 0; +} + +static int bus_switch_request(struct mt9m001 *mt9m001, + struct soc_camera_link *icl) +{ +#ifdef CONFIG_MT9M001_PCA9536_SWITCH + int ret; + unsigned int gpio = icl->gpio; + + if (gpio_is_valid(gpio)) { + /* We have a data bus switch. */ + ret = gpio_request(gpio, "mt9m001"); + if (ret < 0) { + dev_err(&mt9m001->client->dev, "Cannot get GPIO %u\n", + gpio); + return ret; + } + + ret = gpio_direction_output(gpio, 0); + if (ret < 0) { + dev_err(&mt9m001->client->dev, + "Cannot set GPIO %u to output\n", gpio); + gpio_free(gpio); + return ret; + } + } + + mt9m001->switch_gpio = gpio; +#else + mt9m001->switch_gpio = -EINVAL; +#endif + return 0; +} + +static void bus_switch_release(struct mt9m001 *mt9m001) +{ +#ifdef CONFIG_MT9M001_PCA9536_SWITCH + if (gpio_is_valid(mt9m001->switch_gpio)) + gpio_free(mt9m001->switch_gpio); +#endif +} + +static int bus_switch_act(struct mt9m001 *mt9m001, int go8bit) +{ +#ifdef CONFIG_MT9M001_PCA9536_SWITCH + if (!gpio_is_valid(mt9m001->switch_gpio)) + return -ENODEV; + + gpio_set_value_cansleep(mt9m001->switch_gpio, go8bit); + return 0; +#else + return -ENODEV; +#endif +} + +static int bus_switch_possible(struct mt9m001 *mt9m001) +{ +#ifdef CONFIG_MT9M001_PCA9536_SWITCH + return gpio_is_valid(mt9m001->switch_gpio); +#else + return 0; +#endif +} + +static int mt9m001_set_bus_param(struct soc_camera_device *icd, + unsigned long flags) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK; + int ret; + + /* Flags validity verified in test_bus_param */ + + if ((mt9m001->datawidth != 10 && (width_flag == SOCAM_DATAWIDTH_10)) || + (mt9m001->datawidth != 9 && (width_flag == SOCAM_DATAWIDTH_9)) || + (mt9m001->datawidth != 8 && (width_flag == SOCAM_DATAWIDTH_8))) { + /* Well, we actually only can do 10 or 8 bits... */ + if (width_flag == SOCAM_DATAWIDTH_9) + return -EINVAL; + ret = bus_switch_act(mt9m001, + width_flag == SOCAM_DATAWIDTH_8); + if (ret < 0) + return ret; + + mt9m001->datawidth = width_flag == SOCAM_DATAWIDTH_8 ? 8 : 10; + } + + return 0; +} + +static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + unsigned int width_flag = SOCAM_DATAWIDTH_10; + + if (bus_switch_possible(mt9m001)) + width_flag |= SOCAM_DATAWIDTH_8; + + /* MT9M001 has all capture_format parameters fixed */ + return SOCAM_PCLK_SAMPLE_RISING | + SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | + SOCAM_MASTER | + width_flag; +} + +static int mt9m001_set_fmt_cap(struct soc_camera_device *icd, + __u32 pixfmt, struct v4l2_rect *rect) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + int ret; + const u16 hblank = 9, vblank = 25; + + /* Blanking and start values - default... */ + ret = reg_write(icd, MT9M001_HORIZONTAL_BLANKING, hblank); + if (ret >= 0) + ret = reg_write(icd, MT9M001_VERTICAL_BLANKING, vblank); + + /* The caller provides a supported format, as verified per + * call to icd->try_fmt_cap() */ + if (ret >= 0) + ret = reg_write(icd, MT9M001_COLUMN_START, rect->left); + if (ret >= 0) + ret = reg_write(icd, MT9M001_ROW_START, rect->top); + if (ret >= 0) + ret = reg_write(icd, MT9M001_WINDOW_WIDTH, rect->width - 1); + if (ret >= 0) + ret = reg_write(icd, MT9M001_WINDOW_HEIGHT, + rect->height + icd->y_skip_top - 1); + if (ret >= 0 && mt9m001->autoexposure) { + ret = reg_write(icd, MT9M001_SHUTTER_WIDTH, + rect->height + icd->y_skip_top + vblank); + if (ret >= 0) { + const struct v4l2_queryctrl *qctrl = + soc_camera_find_qctrl(icd->ops, + V4L2_CID_EXPOSURE); + icd->exposure = (524 + (rect->height + icd->y_skip_top + + vblank - 1) * + (qctrl->maximum - qctrl->minimum)) / + 1048 + qctrl->minimum; + } + } + + return ret < 0 ? ret : 0; +} + +static int mt9m001_try_fmt_cap(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + if (f->fmt.pix.height < 32 + icd->y_skip_top) + f->fmt.pix.height = 32 + icd->y_skip_top; + if (f->fmt.pix.height > 1024 + icd->y_skip_top) + f->fmt.pix.height = 1024 + icd->y_skip_top; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.width > 1280) + f->fmt.pix.width = 1280; + f->fmt.pix.width &= ~0x01; /* has to be even, unsure why was ~3 */ + + return 0; +} + +static int mt9m001_get_chip_id(struct soc_camera_device *icd, + struct v4l2_chip_ident *id) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + + if (id->match_type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match_chip != mt9m001->client->addr) + return -ENODEV; + + id->ident = mt9m001->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m001_get_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match_chip != mt9m001->client->addr) + return -ENODEV; + + reg->val = reg_read(icd, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9m001_set_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match_chip != mt9m001->client->addr) + return -ENODEV; + + if (reg_write(icd, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static const struct v4l2_queryctrl mt9m001_controls[] = { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Vertically", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 64, + .flags = V4L2_CTRL_FLAG_SLIDER, + }, { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 1, + .maximum = 255, + .step = 1, + .default_value = 255, + .flags = V4L2_CTRL_FLAG_SLIDER, + }, { + .id = V4L2_CID_EXPOSURE_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Automatic Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + } +}; + +static int mt9m001_video_probe(struct soc_camera_device *); +static void mt9m001_video_remove(struct soc_camera_device *); +static int mt9m001_get_control(struct soc_camera_device *, struct v4l2_control *); +static int mt9m001_set_control(struct soc_camera_device *, struct v4l2_control *); + +static struct soc_camera_ops mt9m001_ops = { + .owner = THIS_MODULE, + .probe = mt9m001_video_probe, + .remove = mt9m001_video_remove, + .init = mt9m001_init, + .release = mt9m001_release, + .start_capture = mt9m001_start_capture, + .stop_capture = mt9m001_stop_capture, + .set_fmt_cap = mt9m001_set_fmt_cap, + .try_fmt_cap = mt9m001_try_fmt_cap, + .set_bus_param = mt9m001_set_bus_param, + .query_bus_param = mt9m001_query_bus_param, + .controls = mt9m001_controls, + .num_controls = ARRAY_SIZE(mt9m001_controls), + .get_control = mt9m001_get_control, + .set_control = mt9m001_set_control, + .get_chip_id = mt9m001_get_chip_id, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .get_register = mt9m001_get_register, + .set_register = mt9m001_set_register, +#endif +}; + +static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + data = reg_read(icd, MT9M001_READ_OPTIONS2); + if (data < 0) + return -EIO; + ctrl->value = !!(data & 0x8000); + break; + case V4L2_CID_EXPOSURE_AUTO: + ctrl->value = mt9m001->autoexposure; + break; + } + return 0; +} + +static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + const struct v4l2_queryctrl *qctrl; + int data; + + qctrl = soc_camera_find_qctrl(&mt9m001_ops, ctrl->id); + + if (!qctrl) + return -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->value) + data = reg_set(icd, MT9M001_READ_OPTIONS2, 0x8000); + else + data = reg_clear(icd, MT9M001_READ_OPTIONS2, 0x8000); + if (data < 0) + return -EIO; + break; + case V4L2_CID_GAIN: + if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) + return -EINVAL; + /* See Datasheet Table 7, Gain settings. */ + if (ctrl->value <= qctrl->default_value) { + /* Pack it into 0..1 step 0.125, register values 0..8 */ + unsigned long range = qctrl->default_value - qctrl->minimum; + data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range; + + dev_dbg(&icd->dev, "Setting gain %d\n", data); + data = reg_write(icd, MT9M001_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } else { + /* Pack it into 1.125..15 variable step, register values 9..67 */ + /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ + unsigned long range = qctrl->maximum - qctrl->default_value - 1; + unsigned long gain = ((ctrl->value - qctrl->default_value - 1) * + 111 + range / 2) / range + 9; + + if (gain <= 32) + data = gain; + else if (gain <= 64) + data = ((gain - 32) * 16 + 16) / 32 + 80; + else + data = ((gain - 64) * 7 + 28) / 56 + 96; + + dev_dbg(&icd->dev, "Setting gain from %d to %d\n", + reg_read(icd, MT9M001_GLOBAL_GAIN), data); + data = reg_write(icd, MT9M001_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } + + /* Success */ + icd->gain = ctrl->value; + break; + case V4L2_CID_EXPOSURE: + /* mt9m001 has maximum == default */ + if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) + return -EINVAL; + else { + unsigned long range = qctrl->maximum - qctrl->minimum; + unsigned long shutter = ((ctrl->value - qctrl->minimum) * 1048 + + range / 2) / range + 1; + + dev_dbg(&icd->dev, "Setting shutter width from %d to %lu\n", + reg_read(icd, MT9M001_SHUTTER_WIDTH), shutter); + if (reg_write(icd, MT9M001_SHUTTER_WIDTH, shutter) < 0) + return -EIO; + icd->exposure = ctrl->value; + mt9m001->autoexposure = 0; + } + break; + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->value) { + const u16 vblank = 25; + if (reg_write(icd, MT9M001_SHUTTER_WIDTH, icd->height + + icd->y_skip_top + vblank) < 0) + return -EIO; + qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); + icd->exposure = (524 + (icd->height + icd->y_skip_top + vblank - 1) * + (qctrl->maximum - qctrl->minimum)) / + 1048 + qctrl->minimum; + mt9m001->autoexposure = 1; + } else + mt9m001->autoexposure = 0; + break; + } + return 0; +} + +/* Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one */ +static int mt9m001_video_probe(struct soc_camera_device *icd) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + s32 data; + int ret; + + /* We must have a parent by now. And it cannot be a wrong one. + * So this entire test is completely redundant. */ + if (!icd->dev.parent || + to_soc_camera_host(icd->dev.parent)->nr != icd->iface) + return -ENODEV; + + /* Enable the chip */ + data = reg_write(&mt9m001->icd, MT9M001_CHIP_ENABLE, 1); + dev_dbg(&icd->dev, "write: %d\n", data); + + /* Read out the chip version register */ + data = reg_read(icd, MT9M001_CHIP_VERSION); + + /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ + switch (data) { + case 0x8411: + case 0x8421: + mt9m001->model = V4L2_IDENT_MT9M001C12ST; + icd->formats = mt9m001_colour_formats; + if (mt9m001->client->dev.platform_data) + icd->num_formats = ARRAY_SIZE(mt9m001_colour_formats); + else + icd->num_formats = 1; + break; + case 0x8431: + mt9m001->model = V4L2_IDENT_MT9M001C12STM; + icd->formats = mt9m001_monochrome_formats; + if (mt9m001->client->dev.platform_data) + icd->num_formats = ARRAY_SIZE(mt9m001_monochrome_formats); + else + icd->num_formats = 1; + break; + default: + ret = -ENODEV; + dev_err(&icd->dev, + "No MT9M001 chip detected, register read %x\n", data); + goto ei2c; + } + + dev_info(&icd->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, + data == 0x8431 ? "C12STM" : "C12ST"); + + /* Now that we know the model, we can start video */ + ret = soc_camera_video_start(icd); + if (ret) + goto eisis; + + return 0; + +eisis: +ei2c: + return ret; +} + +static void mt9m001_video_remove(struct soc_camera_device *icd) +{ + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + + dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9m001->client->addr, + mt9m001->icd.dev.parent, mt9m001->icd.vdev); + soc_camera_video_stop(&mt9m001->icd); +} + +static int mt9m001_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9m001 *mt9m001; + struct soc_camera_device *icd; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_link *icl = client->dev.platform_data; + int ret; + + if (!icl) { + dev_err(&client->dev, "MT9M001 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9m001 = kzalloc(sizeof(struct mt9m001), GFP_KERNEL); + if (!mt9m001) + return -ENOMEM; + + mt9m001->client = client; + i2c_set_clientdata(client, mt9m001); + + /* Second stage probe - when a capture adapter is there */ + icd = &mt9m001->icd; + icd->ops = &mt9m001_ops; + icd->control = &client->dev; + icd->x_min = 20; + icd->y_min = 12; + icd->x_current = 20; + icd->y_current = 12; + icd->width_min = 48; + icd->width_max = 1280; + icd->height_min = 32; + icd->height_max = 1024; + icd->y_skip_top = 1; + icd->iface = icl->bus_id; + /* Default datawidth - this is the only width this camera (normally) + * supports. It is only with extra logic that it can support + * other widths. Therefore it seems to be a sensible default. */ + mt9m001->datawidth = 10; + /* Simulated autoexposure. If enabled, we calculate shutter width + * ourselves in the driver based on vertical blanking and frame width */ + mt9m001->autoexposure = 1; + + ret = bus_switch_request(mt9m001, icl); + if (ret) + goto eswinit; + + ret = soc_camera_device_register(icd); + if (ret) + goto eisdr; + + return 0; + +eisdr: + bus_switch_release(mt9m001); +eswinit: + kfree(mt9m001); + return ret; +} + +static int mt9m001_remove(struct i2c_client *client) +{ + struct mt9m001 *mt9m001 = i2c_get_clientdata(client); + + soc_camera_device_unregister(&mt9m001->icd); + bus_switch_release(mt9m001); + kfree(mt9m001); + + return 0; +} + +static const struct i2c_device_id mt9m001_id[] = { + { "mt9m001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9m001_id); + +static struct i2c_driver mt9m001_i2c_driver = { + .driver = { + .name = "mt9m001", + }, + .probe = mt9m001_probe, + .remove = mt9m001_remove, + .id_table = mt9m001_id, +}; + +static int __init mt9m001_mod_init(void) +{ + return i2c_add_driver(&mt9m001_i2c_driver); +} + +static void __exit mt9m001_mod_exit(void) +{ + i2c_del_driver(&mt9m001_i2c_driver); +} + +module_init(mt9m001_mod_init); +module_exit(mt9m001_mod_exit); + +MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c new file mode 100644 index 00000000000..1658fe59039 --- /dev/null +++ b/drivers/media/video/mt9v022.c @@ -0,0 +1,849 @@ +/* + * Driver for MT9V022 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/log2.h> +#include <linux/gpio.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> +#include <media/soc_camera.h> + +/* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c + * The platform has to define i2c_board_info + * and call i2c_register_board_info() */ + +static char *sensor_type; +module_param(sensor_type, charp, S_IRUGO); +MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n"); + +/* mt9v022 selected register addresses */ +#define MT9V022_CHIP_VERSION 0x00 +#define MT9V022_COLUMN_START 0x01 +#define MT9V022_ROW_START 0x02 +#define MT9V022_WINDOW_HEIGHT 0x03 +#define MT9V022_WINDOW_WIDTH 0x04 +#define MT9V022_HORIZONTAL_BLANKING 0x05 +#define MT9V022_VERTICAL_BLANKING 0x06 +#define MT9V022_CHIP_CONTROL 0x07 +#define MT9V022_SHUTTER_WIDTH1 0x08 +#define MT9V022_SHUTTER_WIDTH2 0x09 +#define MT9V022_SHUTTER_WIDTH_CTRL 0x0a +#define MT9V022_TOTAL_SHUTTER_WIDTH 0x0b +#define MT9V022_RESET 0x0c +#define MT9V022_READ_MODE 0x0d +#define MT9V022_MONITOR_MODE 0x0e +#define MT9V022_PIXEL_OPERATION_MODE 0x0f +#define MT9V022_LED_OUT_CONTROL 0x1b +#define MT9V022_ADC_MODE_CONTROL 0x1c +#define MT9V022_ANALOG_GAIN 0x34 +#define MT9V022_BLACK_LEVEL_CALIB_CTRL 0x47 +#define MT9V022_PIXCLK_FV_LV 0x74 +#define MT9V022_DIGITAL_TEST_PATTERN 0x7f +#define MT9V022_AEC_AGC_ENABLE 0xAF +#define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD + +/* Progressive scan, master, defaults */ +#define MT9V022_CHIP_CONTROL_DEFAULT 0x188 + +static const struct soc_camera_data_format mt9v022_colour_formats[] = { + /* Order important: first natively supported, + * second supported with a GPIO extender */ + { + .name = "Bayer (sRGB) 10 bit", + .depth = 10, + .fourcc = V4L2_PIX_FMT_SBGGR16, + .colorspace = V4L2_COLORSPACE_SRGB, + }, { + .name = "Bayer (sRGB) 8 bit", + .depth = 8, + .fourcc = V4L2_PIX_FMT_SBGGR8, + .colorspace = V4L2_COLORSPACE_SRGB, + } +}; + +static const struct soc_camera_data_format mt9v022_monochrome_formats[] = { + /* Order important - see above */ + { + .name = "Monochrome 10 bit", + .depth = 10, + .fourcc = V4L2_PIX_FMT_Y16, + }, { + .name = "Monochrome 8 bit", + .depth = 8, + .fourcc = V4L2_PIX_FMT_GREY, + }, +}; + +struct mt9v022 { + struct i2c_client *client; + struct soc_camera_device icd; + int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */ + int switch_gpio; + u16 chip_control; + unsigned char datawidth; +}; + +static int reg_read(struct soc_camera_device *icd, const u8 reg) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + struct i2c_client *client = mt9v022->client; + s32 data = i2c_smbus_read_word_data(client, reg); + return data < 0 ? data : swab16(data); +} + +static int reg_write(struct soc_camera_device *icd, const u8 reg, + const u16 data) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + return i2c_smbus_write_word_data(mt9v022->client, reg, swab16(data)); +} + +static int reg_set(struct soc_camera_device *icd, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(icd, reg); + if (ret < 0) + return ret; + return reg_write(icd, reg, ret | data); +} + +static int reg_clear(struct soc_camera_device *icd, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(icd, reg); + if (ret < 0) + return ret; + return reg_write(icd, reg, ret & ~data); +} + +static int mt9v022_init(struct soc_camera_device *icd) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + int ret; + + /* Almost the default mode: master, parallel, simultaneous, and an + * undocumented bit 0x200, which is present in table 7, but not in 8, + * plus snapshot mode to disable scan for now */ + mt9v022->chip_control |= 0x10; + ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control); + if (ret >= 0) + reg_write(icd, MT9V022_READ_MODE, 0x300); + + /* All defaults */ + if (ret >= 0) + /* AEC, AGC on */ + ret = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x3); + if (ret >= 0) + ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480); + if (ret >= 0) + /* default - auto */ + ret = reg_clear(icd, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); + if (ret >= 0) + ret = reg_write(icd, MT9V022_DIGITAL_TEST_PATTERN, 0); + + return ret >= 0 ? 0 : -EIO; +} + +static int mt9v022_release(struct soc_camera_device *icd) +{ + /* Nothing? */ + return 0; +} + +static int mt9v022_start_capture(struct soc_camera_device *icd) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + /* Switch to master "normal" mode */ + mt9v022->chip_control &= ~0x10; + if (reg_write(icd, MT9V022_CHIP_CONTROL, + mt9v022->chip_control) < 0) + return -EIO; + return 0; +} + +static int mt9v022_stop_capture(struct soc_camera_device *icd) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + /* Switch to snapshot mode */ + mt9v022->chip_control |= 0x10; + if (reg_write(icd, MT9V022_CHIP_CONTROL, + mt9v022->chip_control) < 0) + return -EIO; + return 0; +} + +static int bus_switch_request(struct mt9v022 *mt9v022, struct soc_camera_link *icl) +{ +#ifdef CONFIG_MT9V022_PCA9536_SWITCH + int ret; + unsigned int gpio = icl->gpio; + + if (gpio_is_valid(gpio)) { + /* We have a data bus switch. */ + ret = gpio_request(gpio, "mt9v022"); + if (ret < 0) { + dev_err(&mt9v022->client->dev, "Cannot get GPIO %u\n", gpio); + return ret; + } + + ret = gpio_direction_output(gpio, 0); + if (ret < 0) { + dev_err(&mt9v022->client->dev, + "Cannot set GPIO %u to output\n", gpio); + gpio_free(gpio); + return ret; + } + } + + mt9v022->switch_gpio = gpio; +#else + mt9v022->switch_gpio = -EINVAL; +#endif + return 0; +} + +static void bus_switch_release(struct mt9v022 *mt9v022) +{ +#ifdef CONFIG_MT9V022_PCA9536_SWITCH + if (gpio_is_valid(mt9v022->switch_gpio)) + gpio_free(mt9v022->switch_gpio); +#endif +} + +static int bus_switch_act(struct mt9v022 *mt9v022, int go8bit) +{ +#ifdef CONFIG_MT9V022_PCA9536_SWITCH + if (!gpio_is_valid(mt9v022->switch_gpio)) + return -ENODEV; + + gpio_set_value_cansleep(mt9v022->switch_gpio, go8bit); + return 0; +#else + return -ENODEV; +#endif +} + +static int bus_switch_possible(struct mt9v022 *mt9v022) +{ +#ifdef CONFIG_MT9V022_PCA9536_SWITCH + return gpio_is_valid(mt9v022->switch_gpio); +#else + return 0; +#endif +} + +static int mt9v022_set_bus_param(struct soc_camera_device *icd, + unsigned long flags) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK; + int ret; + u16 pixclk = 0; + + /* Only one width bit may be set */ + if (!is_power_of_2(width_flag)) + return -EINVAL; + + if ((mt9v022->datawidth != 10 && (width_flag == SOCAM_DATAWIDTH_10)) || + (mt9v022->datawidth != 9 && (width_flag == SOCAM_DATAWIDTH_9)) || + (mt9v022->datawidth != 8 && (width_flag == SOCAM_DATAWIDTH_8))) { + /* Well, we actually only can do 10 or 8 bits... */ + if (width_flag == SOCAM_DATAWIDTH_9) + return -EINVAL; + + ret = bus_switch_act(mt9v022, + width_flag == SOCAM_DATAWIDTH_8); + if (ret < 0) + return ret; + + mt9v022->datawidth = width_flag == SOCAM_DATAWIDTH_8 ? 8 : 10; + } + + if (flags & SOCAM_PCLK_SAMPLE_RISING) + pixclk |= 0x10; + + if (!(flags & SOCAM_HSYNC_ACTIVE_HIGH)) + pixclk |= 0x1; + + if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH)) + pixclk |= 0x2; + + ret = reg_write(icd, MT9V022_PIXCLK_FV_LV, pixclk); + if (ret < 0) + return ret; + + if (!(flags & SOCAM_MASTER)) + mt9v022->chip_control &= ~0x8; + + ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control); + if (ret < 0) + return ret; + + dev_dbg(&icd->dev, "Calculated pixclk 0x%x, chip control 0x%x\n", + pixclk, mt9v022->chip_control); + + return 0; +} + +static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + unsigned int width_flag = SOCAM_DATAWIDTH_10; + + if (bus_switch_possible(mt9v022)) + width_flag |= SOCAM_DATAWIDTH_8; + + return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | + SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | + SOCAM_MASTER | SOCAM_SLAVE | + width_flag; +} + +static int mt9v022_set_fmt_cap(struct soc_camera_device *icd, + __u32 pixfmt, struct v4l2_rect *rect) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + int ret; + + /* The caller provides a supported format, as verified per call to + * icd->try_fmt_cap(), datawidth is from our supported format list */ + switch (pixfmt) { + case V4L2_PIX_FMT_GREY: + case V4L2_PIX_FMT_Y16: + if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM) + return -EINVAL; + break; + case V4L2_PIX_FMT_SBGGR8: + case V4L2_PIX_FMT_SBGGR16: + if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC) + return -EINVAL; + break; + case 0: + /* No format change, only geometry */ + break; + default: + return -EINVAL; + } + + /* Like in example app. Contradicts the datasheet though */ + ret = reg_read(icd, MT9V022_AEC_AGC_ENABLE); + if (ret >= 0) { + if (ret & 1) /* Autoexposure */ + ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, + rect->height + icd->y_skip_top + 43); + else + ret = reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH, + rect->height + icd->y_skip_top + 43); + } + /* Setup frame format: defaults apart from width and height */ + if (ret >= 0) + ret = reg_write(icd, MT9V022_COLUMN_START, rect->left); + if (ret >= 0) + ret = reg_write(icd, MT9V022_ROW_START, rect->top); + if (ret >= 0) + /* Default 94, Phytec driver says: + * "width + horizontal blank >= 660" */ + ret = reg_write(icd, MT9V022_HORIZONTAL_BLANKING, + rect->width > 660 - 43 ? 43 : + 660 - rect->width); + if (ret >= 0) + ret = reg_write(icd, MT9V022_VERTICAL_BLANKING, 45); + if (ret >= 0) + ret = reg_write(icd, MT9V022_WINDOW_WIDTH, rect->width); + if (ret >= 0) + ret = reg_write(icd, MT9V022_WINDOW_HEIGHT, + rect->height + icd->y_skip_top); + + if (ret < 0) + return ret; + + dev_dbg(&icd->dev, "Frame %ux%u pixel\n", rect->width, rect->height); + + return 0; +} + +static int mt9v022_try_fmt_cap(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + if (f->fmt.pix.height < 32 + icd->y_skip_top) + f->fmt.pix.height = 32 + icd->y_skip_top; + if (f->fmt.pix.height > 480 + icd->y_skip_top) + f->fmt.pix.height = 480 + icd->y_skip_top; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.width > 752) + f->fmt.pix.width = 752; + f->fmt.pix.width &= ~0x03; /* ? */ + + return 0; +} + +static int mt9v022_get_chip_id(struct soc_camera_device *icd, + struct v4l2_chip_ident *id) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + + if (id->match_type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match_chip != mt9v022->client->addr) + return -ENODEV; + + id->ident = mt9v022->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v022_get_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match_chip != mt9v022->client->addr) + return -ENODEV; + + reg->val = reg_read(icd, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9v022_set_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match_chip != mt9v022->client->addr) + return -ENODEV; + + if (reg_write(icd, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static const struct v4l2_queryctrl mt9v022_controls[] = { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Vertically", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Horizontally", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Analog Gain", + .minimum = 64, + .maximum = 127, + .step = 1, + .default_value = 64, + .flags = V4L2_CTRL_FLAG_SLIDER, + }, { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 1, + .maximum = 255, + .step = 1, + .default_value = 255, + .flags = V4L2_CTRL_FLAG_SLIDER, + }, { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Automatic Gain", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, { + .id = V4L2_CID_EXPOSURE_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Automatic Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + } +}; + +static int mt9v022_video_probe(struct soc_camera_device *); +static void mt9v022_video_remove(struct soc_camera_device *); +static int mt9v022_get_control(struct soc_camera_device *, struct v4l2_control *); +static int mt9v022_set_control(struct soc_camera_device *, struct v4l2_control *); + +static struct soc_camera_ops mt9v022_ops = { + .owner = THIS_MODULE, + .probe = mt9v022_video_probe, + .remove = mt9v022_video_remove, + .init = mt9v022_init, + .release = mt9v022_release, + .start_capture = mt9v022_start_capture, + .stop_capture = mt9v022_stop_capture, + .set_fmt_cap = mt9v022_set_fmt_cap, + .try_fmt_cap = mt9v022_try_fmt_cap, + .set_bus_param = mt9v022_set_bus_param, + .query_bus_param = mt9v022_query_bus_param, + .controls = mt9v022_controls, + .num_controls = ARRAY_SIZE(mt9v022_controls), + .get_control = mt9v022_get_control, + .set_control = mt9v022_set_control, + .get_chip_id = mt9v022_get_chip_id, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .get_register = mt9v022_get_register, + .set_register = mt9v022_set_register, +#endif +}; + +static int mt9v022_get_control(struct soc_camera_device *icd, + struct v4l2_control *ctrl) +{ + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + data = reg_read(icd, MT9V022_READ_MODE); + if (data < 0) + return -EIO; + ctrl->value = !!(data & 0x10); + break; + case V4L2_CID_HFLIP: + data = reg_read(icd, MT9V022_READ_MODE); + if (data < 0) + return -EIO; + ctrl->value = !!(data & 0x20); + break; + case V4L2_CID_EXPOSURE_AUTO: + data = reg_read(icd, MT9V022_AEC_AGC_ENABLE); + if (data < 0) + return -EIO; + ctrl->value = !!(data & 0x1); + break; + case V4L2_CID_AUTOGAIN: + data = reg_read(icd, MT9V022_AEC_AGC_ENABLE); + if (data < 0) + return -EIO; + ctrl->value = !!(data & 0x2); + break; + } + return 0; +} + +static int mt9v022_set_control(struct soc_camera_device *icd, + struct v4l2_control *ctrl) +{ + int data; + const struct v4l2_queryctrl *qctrl; + + qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id); + + if (!qctrl) + return -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->value) + data = reg_set(icd, MT9V022_READ_MODE, 0x10); + else + data = reg_clear(icd, MT9V022_READ_MODE, 0x10); + if (data < 0) + return -EIO; + break; + case V4L2_CID_HFLIP: + if (ctrl->value) + data = reg_set(icd, MT9V022_READ_MODE, 0x20); + else + data = reg_clear(icd, MT9V022_READ_MODE, 0x20); + if (data < 0) + return -EIO; + break; + case V4L2_CID_GAIN: + /* mt9v022 has minimum == default */ + if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) + return -EINVAL; + else { + unsigned long range = qctrl->maximum - qctrl->minimum; + /* Datasheet says 16 to 64. autogain only works properly + * after setting gain to maximum 14. Larger values + * produce "white fly" noise effect. On the whole, + * manually setting analog gain does no good. */ + unsigned long gain = ((ctrl->value - qctrl->minimum) * + 10 + range / 2) / range + 4; + if (gain >= 32) + gain &= ~1; + /* The user wants to set gain manually, hope, she + * knows, what she's doing... Switch AGC off. */ + + if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2) < 0) + return -EIO; + + dev_info(&icd->dev, "Setting gain from %d to %lu\n", + reg_read(icd, MT9V022_ANALOG_GAIN), gain); + if (reg_write(icd, MT9V022_ANALOG_GAIN, gain) < 0) + return -EIO; + icd->gain = ctrl->value; + } + break; + case V4L2_CID_EXPOSURE: + /* mt9v022 has maximum == default */ + if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) + return -EINVAL; + else { + unsigned long range = qctrl->maximum - qctrl->minimum; + unsigned long shutter = ((ctrl->value - qctrl->minimum) * + 479 + range / 2) / range + 1; + /* The user wants to set shutter width manually, hope, + * she knows, what she's doing... Switch AEC off. */ + + if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1) < 0) + return -EIO; + + dev_dbg(&icd->dev, "Shutter width from %d to %lu\n", + reg_read(icd, MT9V022_TOTAL_SHUTTER_WIDTH), + shutter); + if (reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH, + shutter) < 0) + return -EIO; + icd->exposure = ctrl->value; + } + break; + case V4L2_CID_AUTOGAIN: + if (ctrl->value) + data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x2); + else + data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2); + if (data < 0) + return -EIO; + break; + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->value) + data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x1); + else + data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1); + if (data < 0) + return -EIO; + break; + } + return 0; +} + +/* Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one */ +static int mt9v022_video_probe(struct soc_camera_device *icd) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + s32 data; + int ret; + + if (!icd->dev.parent || + to_soc_camera_host(icd->dev.parent)->nr != icd->iface) + return -ENODEV; + + /* Read out the chip version register */ + data = reg_read(icd, MT9V022_CHIP_VERSION); + + /* must be 0x1311 or 0x1313 */ + if (data != 0x1311 && data != 0x1313) { + ret = -ENODEV; + dev_info(&icd->dev, "No MT9V022 detected, ID register 0x%x\n", + data); + goto ei2c; + } + + /* Soft reset */ + ret = reg_write(icd, MT9V022_RESET, 1); + if (ret < 0) + goto ei2c; + /* 15 clock cycles */ + udelay(200); + if (reg_read(icd, MT9V022_RESET)) { + dev_err(&icd->dev, "Resetting MT9V022 failed!\n"); + goto ei2c; + } + + /* Set monochrome or colour sensor type */ + if (sensor_type && (!strcmp("colour", sensor_type) || + !strcmp("color", sensor_type))) { + ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11); + mt9v022->model = V4L2_IDENT_MT9V022IX7ATC; + icd->formats = mt9v022_colour_formats; + if (mt9v022->client->dev.platform_data) + icd->num_formats = ARRAY_SIZE(mt9v022_colour_formats); + else + icd->num_formats = 1; + } else { + ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 0x11); + mt9v022->model = V4L2_IDENT_MT9V022IX7ATM; + icd->formats = mt9v022_monochrome_formats; + if (mt9v022->client->dev.platform_data) + icd->num_formats = ARRAY_SIZE(mt9v022_monochrome_formats); + else + icd->num_formats = 1; + } + + if (ret >= 0) + ret = soc_camera_video_start(icd); + if (ret < 0) + goto eisis; + + dev_info(&icd->dev, "Detected a MT9V022 chip ID %x, %s sensor\n", + data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ? + "monochrome" : "colour"); + + return 0; + +eisis: +ei2c: + return ret; +} + +static void mt9v022_video_remove(struct soc_camera_device *icd) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + + dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9v022->client->addr, + mt9v022->icd.dev.parent, mt9v022->icd.vdev); + soc_camera_video_stop(&mt9v022->icd); +} + +static int mt9v022_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9v022 *mt9v022; + struct soc_camera_device *icd; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_link *icl = client->dev.platform_data; + int ret; + + if (!icl) { + dev_err(&client->dev, "MT9V022 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9v022 = kzalloc(sizeof(struct mt9v022), GFP_KERNEL); + if (!mt9v022) + return -ENOMEM; + + mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT; + mt9v022->client = client; + i2c_set_clientdata(client, mt9v022); + + icd = &mt9v022->icd; + icd->ops = &mt9v022_ops; + icd->control = &client->dev; + icd->x_min = 1; + icd->y_min = 4; + icd->x_current = 1; + icd->y_current = 4; + icd->width_min = 48; + icd->width_max = 752; + icd->height_min = 32; + icd->height_max = 480; + icd->y_skip_top = 1; + icd->iface = icl->bus_id; + /* Default datawidth - this is the only width this camera (normally) + * supports. It is only with extra logic that it can support + * other widths. Therefore it seems to be a sensible default. */ + mt9v022->datawidth = 10; + + ret = bus_switch_request(mt9v022, icl); + if (ret) + goto eswinit; + + ret = soc_camera_device_register(icd); + if (ret) + goto eisdr; + + return 0; + +eisdr: + bus_switch_release(mt9v022); +eswinit: + kfree(mt9v022); + return ret; +} + +static int mt9v022_remove(struct i2c_client *client) +{ + struct mt9v022 *mt9v022 = i2c_get_clientdata(client); + + soc_camera_device_unregister(&mt9v022->icd); + bus_switch_release(mt9v022); + kfree(mt9v022); + + return 0; +} + +static const struct i2c_device_id mt9v022_id[] = { + { "mt9v022", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v022_id); + +static struct i2c_driver mt9v022_i2c_driver = { + .driver = { + .name = "mt9v022", + }, + .probe = mt9v022_probe, + .remove = mt9v022_remove, + .id_table = mt9v022_id, +}; + +static int __init mt9v022_mod_init(void) +{ + return i2c_add_driver(&mt9v022_i2c_driver); +} + +static void __exit mt9v022_mod_exit(void) +{ + i2c_del_driver(&mt9v022_i2c_driver); +} + +module_init(mt9v022_mod_init); +module_exit(mt9v022_mod_exit); + +MODULE_DESCRIPTION("Micron MT9V022 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index add6d0d680b..f68e91fbe7f 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -38,7 +38,7 @@ #define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) /* global variable */ -static int mxb_num = 0; +static int mxb_num; /* initial frequence the tuner will be tuned to. in verden (lower saxony, germany) 4148 is a @@ -47,7 +47,7 @@ static int freq = 4148; module_param(freq, int, 0644); MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup"); -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); @@ -221,9 +221,8 @@ static int mxb_probe(struct saa7146_dev* dev) device_for_each_child(&mxb->i2c_adapter.dev, mxb, mxb_check_clients); /* check if all devices are present */ - if( 0 == mxb->tea6420_1 || 0 == mxb->tea6420_2 || 0 == mxb->tea6415c - || 0 == mxb->tda9840 || 0 == mxb->saa7111a || 0 == mxb->tuner ) { - + if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c || + !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) { printk("mxb: did not find all i2c devices. aborting\n"); i2c_del_adapter(&mxb->i2c_adapter); kfree(mxb); diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index d55d5800efb..eafb0c7736e 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -41,7 +41,6 @@ #include <linux/slab.h> #include <linux/ctype.h> #include <linux/pagemap.h> -#include <asm/semaphore.h> #include <asm/processor.h> #include <linux/mm.h> #include <linux/device.h> @@ -4660,7 +4659,9 @@ static const struct file_operations ov511_fops = { .read = ov51x_v4l1_read, .mmap = ov51x_v4l1_mmap, .ioctl = ov51x_v4l1_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; @@ -5832,7 +5833,7 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) goto error; memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev)); - ov->vdev->dev = &dev->dev; + ov->vdev->dev = &intf->dev; video_set_drvdata(ov->vdev, ov); for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) { diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h index 18c64222dd1..1010e51189b 100644 --- a/drivers/media/video/ov511.h +++ b/drivers/media/video/ov511.h @@ -12,7 +12,7 @@ #ifdef OV511_DEBUG #define PDEBUG(level, fmt, args...) \ if (debug >= (level)) info("[%s:%d] " fmt, \ - __FUNCTION__, __LINE__ , ## args) + __func__, __LINE__ , ## args) #else #define PDEBUG(level, fmt, args...) do {} while(0) #endif diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h index 50c7763d44b..9afa4fe4772 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_priv.h +++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h @@ -24,11 +24,11 @@ extern int ovcamchip_debug; #define PDEBUG(level, fmt, args...) \ if (ovcamchip_debug >= (level)) pr_debug("[%s:%d] " fmt "\n", \ - __FUNCTION__, __LINE__ , ## args) + __func__, __LINE__ , ## args) #define DDEBUG(level, dev, fmt, args...) \ if (ovcamchip_debug >= (level)) dev_dbg(dev, "[%s:%d] " fmt "\n", \ - __FUNCTION__, __LINE__ , ## args) + __func__, __LINE__ , ## args) /* Number of times to retry chip detection. Increase this if you are getting * "Failed to init camera chip" */ diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index 6820c2aabd3..51b1461d8fb 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -57,11 +57,11 @@ struct i2c_info u8 hits; }; -static int i2c_count = 0; +static int i2c_count; static struct i2c_info i2cinfo[64]; static int decoder = PHILIPS2; -static int standard = 0; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */ +static int standard; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */ /* * I/O ports and Shared Memory @@ -885,7 +885,9 @@ static const struct file_operations pms_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = pms_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = pms_read, .llseek = no_llseek, }; diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig index 6fc1b8be1a1..4482b2c72ce 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/video/pvrusb2/Kconfig @@ -1,6 +1,8 @@ config VIDEO_PVRUSB2 tristate "Hauppauge WinTV-PVR USB2 support" - depends on VIDEO_V4L2 && I2C && EXPERIMENTAL + depends on VIDEO_V4L2 && I2C + depends on VIDEO_MEDIA # Avoids pvrusb = Y / DVB = M + depends on HOTPLUG # due to FW_LOADER select FW_LOADER select VIDEO_TUNER select VIDEO_TVEEPROM @@ -9,6 +11,7 @@ config VIDEO_PVRUSB2 select VIDEO_CX25840 select VIDEO_MSP3400 select VIDEO_WM8775 + select VIDEO_CS53L32A ---help--- This is a video4linux driver for Conexant 23416 based usb2 personal video recorder devices. @@ -16,32 +19,6 @@ config VIDEO_PVRUSB2 To compile this driver as a module, choose M here: the module will be called pvrusb2 -config VIDEO_PVRUSB2_ONAIR_CREATOR - bool "pvrusb2 driver support for OnAir Creator model" - depends on VIDEO_PVRUSB2 && EXPERIMENTAL - select VIDEO_SAA711X - select VIDEO_CS53L32A - ---help--- - - This option enables support for the OnAir Creator USB tuner - device. This is a hybrid device, however currently only - analog mode is supported. - - If you are in doubt, say Y. - -config VIDEO_PVRUSB2_ONAIR_USB2 - bool "pvrusb2 driver support for OnAir USB2 model" - depends on VIDEO_PVRUSB2 && EXPERIMENTAL - select VIDEO_SAA711X - select VIDEO_CS53L32A - ---help--- - - This option enables support for the OnAir USB2 tuner device - (also known as the Sasem tuner). This is a hybrid device, - however currently only analog mode is supported. - - If you are in doubt, say Y. - config VIDEO_PVRUSB2_SYSFS bool "pvrusb2 sysfs support (EXPERIMENTAL)" default y @@ -58,6 +35,25 @@ config VIDEO_PVRUSB2_SYSFS Note: This feature is experimental and subject to change. +config VIDEO_PVRUSB2_DVB + bool "pvrusb2 ATSC/DVB support (EXPERIMENTAL)" + default y + depends on VIDEO_PVRUSB2 && DVB_CORE && EXPERIMENTAL + select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_S5H1409 if !DVB_FE_CUSTOMISE + select DVB_S5H1411 if !DVB_FE_CUSTOMISE + select DVB_TDA10048 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE + ---help--- + + This option enables a DVB interface for the pvrusb2 driver. + If your device does not support digital television, this + feature will have no affect on the driver's operation. + + If you are in doubt, say Y. + config VIDEO_PVRUSB2_DEBUGIFC bool "pvrusb2 debug interface" depends on VIDEO_PVRUSB2_SYSFS diff --git a/drivers/media/video/pvrusb2/Makefile b/drivers/media/video/pvrusb2/Makefile index 47284e55864..4fda2de69ab 100644 --- a/drivers/media/video/pvrusb2/Makefile +++ b/drivers/media/video/pvrusb2/Makefile @@ -1,5 +1,6 @@ obj-pvrusb2-sysfs-$(CONFIG_VIDEO_PVRUSB2_SYSFS) := pvrusb2-sysfs.o obj-pvrusb2-debugifc-$(CONFIG_VIDEO_PVRUSB2_DEBUGIFC) := pvrusb2-debugifc.o +obj-pvrusb2-dvb-$(CONFIG_VIDEO_PVRUSB2_DVB) := pvrusb2-dvb.o pvrusb2-objs := pvrusb2-i2c-core.o pvrusb2-i2c-cmd-v4l2.o \ pvrusb2-audio.o pvrusb2-i2c-chips-v4l2.o \ @@ -9,6 +10,12 @@ pvrusb2-objs := pvrusb2-i2c-core.o pvrusb2-i2c-cmd-v4l2.o \ pvrusb2-ctrl.o pvrusb2-std.o pvrusb2-devattr.o \ pvrusb2-context.o pvrusb2-io.o pvrusb2-ioread.o \ pvrusb2-cx2584x-v4l.o pvrusb2-wm8775.o \ + $(obj-pvrusb2-dvb-y) \ $(obj-pvrusb2-sysfs-y) $(obj-pvrusb2-debugifc-y) obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2.o + +EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c index 9a7c8e9c3e8..8d859ccd48e 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -75,7 +75,7 @@ static void set_stereo(struct pvr2_msp3400_handler *ctxt) pvr2_trace(PVR2_TRACE_CHIPS,"i2c msp3400 v4l2 set_stereo"); if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != 0) && + ((sp = routing_schemes + sid) != NULL) && (hdw->input_val >= 0) && (hdw->input_val < sp->cnt)) { route.input = sp->def[hdw->input_val]; diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.c b/drivers/media/video/pvrusb2/pvrusb2-context.c index 9d94aed2e12..73dcb1c57ae 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-context.c +++ b/drivers/media/video/pvrusb2/pvrusb2-context.c @@ -23,40 +23,193 @@ #include "pvrusb2-ioread.h" #include "pvrusb2-hdw.h" #include "pvrusb2-debug.h" +#include <linux/wait.h> +#include <linux/kthread.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/slab.h> -#include <asm/semaphore.h> + +static struct pvr2_context *pvr2_context_exist_first; +static struct pvr2_context *pvr2_context_exist_last; +static struct pvr2_context *pvr2_context_notify_first; +static struct pvr2_context *pvr2_context_notify_last; +static DEFINE_MUTEX(pvr2_context_mutex); +static DECLARE_WAIT_QUEUE_HEAD(pvr2_context_sync_data); +static DECLARE_WAIT_QUEUE_HEAD(pvr2_context_cleanup_data); +static int pvr2_context_cleanup_flag; +static int pvr2_context_cleaned_flag; +static struct task_struct *pvr2_context_thread_ptr; + + +static void pvr2_context_set_notify(struct pvr2_context *mp, int fl) +{ + int signal_flag = 0; + mutex_lock(&pvr2_context_mutex); + if (fl) { + if (!mp->notify_flag) { + signal_flag = (pvr2_context_notify_first == NULL); + mp->notify_prev = pvr2_context_notify_last; + mp->notify_next = NULL; + pvr2_context_notify_last = mp; + if (mp->notify_prev) { + mp->notify_prev->notify_next = mp; + } else { + pvr2_context_notify_first = mp; + } + mp->notify_flag = !0; + } + } else { + if (mp->notify_flag) { + mp->notify_flag = 0; + if (mp->notify_next) { + mp->notify_next->notify_prev = mp->notify_prev; + } else { + pvr2_context_notify_last = mp->notify_prev; + } + if (mp->notify_prev) { + mp->notify_prev->notify_next = mp->notify_next; + } else { + pvr2_context_notify_first = mp->notify_next; + } + } + } + mutex_unlock(&pvr2_context_mutex); + if (signal_flag) wake_up(&pvr2_context_sync_data); +} static void pvr2_context_destroy(struct pvr2_context *mp) { - pvr2_trace(PVR2_TRACE_STRUCT,"Destroying pvr_main id=%p",mp); + pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context %p (destroy)",mp); if (mp->hdw) pvr2_hdw_destroy(mp->hdw); + pvr2_context_set_notify(mp, 0); + mutex_lock(&pvr2_context_mutex); + if (mp->exist_next) { + mp->exist_next->exist_prev = mp->exist_prev; + } else { + pvr2_context_exist_last = mp->exist_prev; + } + if (mp->exist_prev) { + mp->exist_prev->exist_next = mp->exist_next; + } else { + pvr2_context_exist_first = mp->exist_next; + } + if (!pvr2_context_exist_first) { + /* Trigger wakeup on control thread in case it is waiting + for an exit condition. */ + wake_up(&pvr2_context_sync_data); + } + mutex_unlock(&pvr2_context_mutex); kfree(mp); } -static void pvr2_context_state_check(struct pvr2_context *mp) +static void pvr2_context_notify(struct pvr2_context *mp) { - if (mp->init_flag) return; + pvr2_context_set_notify(mp,!0); +} + - switch (pvr2_hdw_get_state(mp->hdw)) { - case PVR2_STATE_WARM: break; - case PVR2_STATE_ERROR: break; - case PVR2_STATE_READY: break; - case PVR2_STATE_RUN: break; - default: return; +static void pvr2_context_check(struct pvr2_context *mp) +{ + struct pvr2_channel *ch1, *ch2; + pvr2_trace(PVR2_TRACE_CTXT, + "pvr2_context %p (notify)", mp); + if (!mp->initialized_flag && !mp->disconnect_flag) { + mp->initialized_flag = !0; + pvr2_trace(PVR2_TRACE_CTXT, + "pvr2_context %p (initialize)", mp); + /* Finish hardware initialization */ + if (pvr2_hdw_initialize(mp->hdw, + (void (*)(void *))pvr2_context_notify, + mp)) { + mp->video_stream.stream = + pvr2_hdw_get_video_stream(mp->hdw); + /* Trigger interface initialization. By doing this + here initialization runs in our own safe and + cozy thread context. */ + if (mp->setup_func) mp->setup_func(mp); + } else { + pvr2_trace(PVR2_TRACE_CTXT, + "pvr2_context %p (thread skipping setup)", + mp); + /* Even though initialization did not succeed, + we're still going to continue anyway. We need + to do this in order to await the expected + disconnect (which we will detect in the normal + course of operation). */ + } } - pvr2_context_enter(mp); do { - mp->init_flag = !0; - mp->video_stream.stream = pvr2_hdw_get_video_stream(mp->hdw); - if (mp->setup_func) { - mp->setup_func(mp); + for (ch1 = mp->mc_first; ch1; ch1 = ch2) { + ch2 = ch1->mc_next; + if (ch1->check_func) ch1->check_func(ch1); + } + + if (mp->disconnect_flag && !mp->mc_first) { + /* Go away... */ + pvr2_context_destroy(mp); + return; + } +} + + +static int pvr2_context_shutok(void) +{ + return pvr2_context_cleanup_flag && (pvr2_context_exist_first == NULL); +} + + +static int pvr2_context_thread_func(void *foo) +{ + struct pvr2_context *mp; + + pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context thread start"); + + do { + while ((mp = pvr2_context_notify_first) != NULL) { + pvr2_context_set_notify(mp, 0); + pvr2_context_check(mp); } - } while (0); pvr2_context_exit(mp); - } + wait_event_interruptible( + pvr2_context_sync_data, + ((pvr2_context_notify_first != NULL) || + pvr2_context_shutok())); + } while (!pvr2_context_shutok()); + + pvr2_context_cleaned_flag = !0; + wake_up(&pvr2_context_cleanup_data); + + pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context thread cleaned up"); + + wait_event_interruptible( + pvr2_context_sync_data, + kthread_should_stop()); + + pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context thread end"); + + return 0; +} + + +int pvr2_context_global_init(void) +{ + pvr2_context_thread_ptr = kthread_run(pvr2_context_thread_func, + NULL, + "pvrusb2-context"); + return (pvr2_context_thread_ptr ? 0 : -ENOMEM); +} + + +void pvr2_context_global_done(void) +{ + pvr2_context_cleanup_flag = !0; + wake_up(&pvr2_context_sync_data); + wait_event_interruptible( + pvr2_context_cleanup_data, + pvr2_context_cleaned_flag); + kthread_stop(pvr2_context_thread_ptr); +} struct pvr2_context *pvr2_context_create( @@ -67,67 +220,75 @@ struct pvr2_context *pvr2_context_create( struct pvr2_context *mp = NULL; mp = kzalloc(sizeof(*mp),GFP_KERNEL); if (!mp) goto done; - pvr2_trace(PVR2_TRACE_STRUCT,"Creating pvr_main id=%p",mp); + pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context %p (create)",mp); mp->setup_func = setup_func; mutex_init(&mp->mutex); + mutex_lock(&pvr2_context_mutex); + mp->exist_prev = pvr2_context_exist_last; + mp->exist_next = NULL; + pvr2_context_exist_last = mp; + if (mp->exist_prev) { + mp->exist_prev->exist_next = mp; + } else { + pvr2_context_exist_first = mp; + } + mutex_unlock(&pvr2_context_mutex); mp->hdw = pvr2_hdw_create(intf,devid); if (!mp->hdw) { pvr2_context_destroy(mp); mp = NULL; goto done; } - pvr2_hdw_set_state_callback(mp->hdw, - (void (*)(void *))pvr2_context_state_check, - mp); - pvr2_context_state_check(mp); + pvr2_context_set_notify(mp, !0); done: return mp; } -void pvr2_context_enter(struct pvr2_context *mp) +static void pvr2_context_reset_input_limits(struct pvr2_context *mp) +{ + unsigned int tmsk,mmsk; + struct pvr2_channel *cp; + struct pvr2_hdw *hdw = mp->hdw; + mmsk = pvr2_hdw_get_input_available(hdw); + tmsk = mmsk; + for (cp = mp->mc_first; cp; cp = cp->mc_next) { + if (!cp->input_mask) continue; + tmsk &= cp->input_mask; + } + pvr2_hdw_set_input_allowed(hdw,mmsk,tmsk); + pvr2_hdw_commit_ctl(hdw); +} + + +static void pvr2_context_enter(struct pvr2_context *mp) { mutex_lock(&mp->mutex); - pvr2_trace(PVR2_TRACE_CREG,"pvr2_context_enter(id=%p)",mp); } -void pvr2_context_exit(struct pvr2_context *mp) +static void pvr2_context_exit(struct pvr2_context *mp) { int destroy_flag = 0; if (!(mp->mc_first || !mp->disconnect_flag)) { destroy_flag = !0; } - pvr2_trace(PVR2_TRACE_CREG,"pvr2_context_exit(id=%p) outside",mp); mutex_unlock(&mp->mutex); - if (destroy_flag) pvr2_context_destroy(mp); -} - - -static void pvr2_context_run_checks(struct pvr2_context *mp) -{ - struct pvr2_channel *ch1,*ch2; - for (ch1 = mp->mc_first; ch1; ch1 = ch2) { - ch2 = ch1->mc_next; - if (ch1->check_func) { - ch1->check_func(ch1); - } - } + if (destroy_flag) pvr2_context_notify(mp); } void pvr2_context_disconnect(struct pvr2_context *mp) { - pvr2_context_enter(mp); do { - pvr2_hdw_disconnect(mp->hdw); - mp->disconnect_flag = !0; - pvr2_context_run_checks(mp); - } while (0); pvr2_context_exit(mp); + pvr2_hdw_disconnect(mp->hdw); + mp->disconnect_flag = !0; + pvr2_context_notify(mp); } void pvr2_channel_init(struct pvr2_channel *cp,struct pvr2_context *mp) { + pvr2_context_enter(mp); cp->hdw = mp->hdw; cp->mc_head = mp; cp->mc_next = NULL; @@ -138,6 +299,7 @@ void pvr2_channel_init(struct pvr2_channel *cp,struct pvr2_context *mp) mp->mc_first = cp; } mp->mc_last = cp; + pvr2_context_exit(mp); } @@ -153,7 +315,10 @@ static void pvr2_channel_disclaim_stream(struct pvr2_channel *cp) void pvr2_channel_done(struct pvr2_channel *cp) { struct pvr2_context *mp = cp->mc_head; + pvr2_context_enter(mp); + cp->input_mask = 0; pvr2_channel_disclaim_stream(cp); + pvr2_context_reset_input_limits(mp); if (cp->mc_next) { cp->mc_next->mc_prev = cp->mc_prev; } else { @@ -165,6 +330,58 @@ void pvr2_channel_done(struct pvr2_channel *cp) mp->mc_first = cp->mc_next; } cp->hdw = NULL; + pvr2_context_exit(mp); +} + + +int pvr2_channel_limit_inputs(struct pvr2_channel *cp,unsigned int cmsk) +{ + unsigned int tmsk,mmsk; + int ret = 0; + struct pvr2_channel *p2; + struct pvr2_hdw *hdw = cp->hdw; + + mmsk = pvr2_hdw_get_input_available(hdw); + cmsk &= mmsk; + if (cmsk == cp->input_mask) { + /* No change; nothing to do */ + return 0; + } + + pvr2_context_enter(cp->mc_head); + do { + if (!cmsk) { + cp->input_mask = 0; + pvr2_context_reset_input_limits(cp->mc_head); + break; + } + tmsk = mmsk; + for (p2 = cp->mc_head->mc_first; p2; p2 = p2->mc_next) { + if (p2 == cp) continue; + if (!p2->input_mask) continue; + tmsk &= p2->input_mask; + } + if (!(tmsk & cmsk)) { + ret = -EPERM; + break; + } + tmsk &= cmsk; + if ((ret = pvr2_hdw_set_input_allowed(hdw,mmsk,tmsk)) != 0) { + /* Internal failure changing allowed list; probably + should not happen, but react if it does. */ + break; + } + cp->input_mask = cmsk; + pvr2_hdw_commit_ctl(hdw); + } while (0); + pvr2_context_exit(cp->mc_head); + return ret; +} + + +unsigned int pvr2_channel_get_limited_inputs(struct pvr2_channel *cp) +{ + return cp->input_mask; } @@ -174,7 +391,7 @@ int pvr2_channel_claim_stream(struct pvr2_channel *cp, int code = 0; pvr2_context_enter(cp->mc_head); do { if (sp == cp->stream) break; - if (sp->user) { + if (sp && sp->user) { code = -EBUSY; break; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.h b/drivers/media/video/pvrusb2/pvrusb2-context.h index a04187a9322..745e270233c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-context.h +++ b/drivers/media/video/pvrusb2/pvrusb2-context.h @@ -30,7 +30,6 @@ struct pvr2_stream; /* stream interface - defined elsewhere */ struct pvr2_context; /* All central state */ struct pvr2_channel; /* One I/O pathway to a user */ struct pvr2_context_stream; /* Wrapper for a stream */ -struct pvr2_crit_reg; /* Critical region pointer */ struct pvr2_ioread; /* Low level stream structure */ struct pvr2_context_stream { @@ -41,11 +40,16 @@ struct pvr2_context_stream { struct pvr2_context { struct pvr2_channel *mc_first; struct pvr2_channel *mc_last; + struct pvr2_context *exist_next; + struct pvr2_context *exist_prev; + struct pvr2_context *notify_next; + struct pvr2_context *notify_prev; struct pvr2_hdw *hdw; struct pvr2_context_stream video_stream; struct mutex mutex; + int notify_flag; + int initialized_flag; int disconnect_flag; - int init_flag; /* Called after pvr2_context initialization is complete */ void (*setup_func)(struct pvr2_context *); @@ -58,12 +62,10 @@ struct pvr2_channel { struct pvr2_channel *mc_prev; struct pvr2_context_stream *stream; struct pvr2_hdw *hdw; + unsigned int input_mask; void (*check_func)(struct pvr2_channel *); }; -void pvr2_context_enter(struct pvr2_context *); -void pvr2_context_exit(struct pvr2_context *); - struct pvr2_context *pvr2_context_create(struct usb_interface *intf, const struct usb_device_id *devid, void (*setup_func)(struct pvr2_context *)); @@ -71,11 +73,15 @@ void pvr2_context_disconnect(struct pvr2_context *); void pvr2_channel_init(struct pvr2_channel *,struct pvr2_context *); void pvr2_channel_done(struct pvr2_channel *); +int pvr2_channel_limit_inputs(struct pvr2_channel *,unsigned int); +unsigned int pvr2_channel_get_limited_inputs(struct pvr2_channel *); int pvr2_channel_claim_stream(struct pvr2_channel *, struct pvr2_context_stream *); struct pvr2_ioread *pvr2_channel_create_mpeg_stream( struct pvr2_context_stream *); +int pvr2_context_global_init(void); +void pvr2_context_global_done(void); #endif /* __PVRUSB2_CONTEXT_H */ /* diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c index 46f156fb108..91a42f2473a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c @@ -30,6 +30,9 @@ static int pvr2_ctrl_range_check(struct pvr2_ctrl *cptr,int val) { if (cptr->info->check_value) { if (!cptr->info->check_value(cptr,val)) return -ERANGE; + } else if (cptr->info->type == pvr2_ctl_enum) { + if (val < 0) return -ERANGE; + if (val >= cptr->info->def.type_enum.count) return -ERANGE; } else { int lim; lim = cptr->info->def.type_int.min_value; @@ -60,16 +63,13 @@ int pvr2_ctrl_set_mask_value(struct pvr2_ctrl *cptr,int mask,int val) int ret = 0; if (!cptr) return -EINVAL; LOCK_TAKE(cptr->hdw->big_lock); do { - if (cptr->info->set_value != 0) { + if (cptr->info->set_value) { if (cptr->info->type == pvr2_ctl_bitmask) { mask &= cptr->info->def.type_bitmask.valid_bits; - } else if (cptr->info->type == pvr2_ctl_int) { + } else if ((cptr->info->type == pvr2_ctl_int)|| + (cptr->info->type == pvr2_ctl_enum)) { ret = pvr2_ctrl_range_check(cptr,val); if (ret < 0) break; - } else if (cptr->info->type == pvr2_ctl_enum) { - if (val >= cptr->info->def.type_enum.count) { - break; - } } else if (cptr->info->type != pvr2_ctl_bool) { break; } @@ -204,8 +204,7 @@ int pvr2_ctrl_get_valname(struct pvr2_ctrl *cptr,int val, if (cptr->info->type == pvr2_ctl_enum) { const char **names; names = cptr->info->def.type_enum.value_names; - if ((val >= 0) && - (val < cptr->info->def.type_enum.count)) { + if (pvr2_ctrl_range_check(cptr,val) == 0) { if (names[val]) { *blen = scnprintf( bptr,bmax,"%s", @@ -265,7 +264,7 @@ unsigned int pvr2_ctrl_get_v4lflags(struct pvr2_ctrl *cptr) int pvr2_ctrl_is_writable(struct pvr2_ctrl *cptr) { if (!cptr) return 0; - return cptr->info->set_value != 0; + return cptr->info->set_value != NULL; } @@ -528,10 +527,8 @@ int pvr2_ctrl_sym_to_value(struct pvr2_ctrl *cptr, ptr,len,valptr, cptr->info->def.type_enum.value_names, cptr->info->def.type_enum.count); - if ((ret >= 0) && - ((*valptr < 0) || - (*valptr >= cptr->info->def.type_enum.count))) { - ret = -ERANGE; + if (ret >= 0) { + ret = pvr2_ctrl_range_check(cptr,*valptr); } if (maskptr) *maskptr = ~0; } else if (cptr->info->type == pvr2_ctl_bitmask) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index ffdc45c324e..29d50597c88 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -84,7 +84,9 @@ static const struct routing_scheme_item routing_schemegv[] = { .vid = CX25840_COMPOSITE2, .aud = CX25840_AUDIO5, }, - [PVR2_CVAL_INPUT_RADIO] = { /* Treat the same as composite */ + [PVR2_CVAL_INPUT_RADIO] = { + /* line-in is used for radio and composite. A GPIO is + used to switch between the two choices. */ .vid = CX25840_COMPOSITE1, .aud = CX25840_AUDIO_SERIAL, }, @@ -121,7 +123,7 @@ static void set_input(struct pvr2_v4l_cx2584x *ctxt) memset(&route,0,sizeof(route)); if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != 0) && + ((sp = routing_schemes + sid) != NULL) && (hdw->input_val >= 0) && (hdw->input_val < sp->cnt)) { vid_input = sp->def[hdw->input_val].vid; diff --git a/drivers/media/video/pvrusb2/pvrusb2-debug.h b/drivers/media/video/pvrusb2/pvrusb2-debug.h index fca49d8a931..707d2d9635d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-debug.h +++ b/drivers/media/video/pvrusb2/pvrusb2-debug.h @@ -39,7 +39,7 @@ extern int pvrusb2_debug; #define PVR2_TRACE_EEPROM (1 << 10) /* eeprom parsing / report */ #define PVR2_TRACE_STRUCT (1 << 11) /* internal struct creation */ #define PVR2_TRACE_OPEN_CLOSE (1 << 12) /* application open / close */ -#define PVR2_TRACE_CREG (1 << 13) /* Main critical region entry / exit */ +#define PVR2_TRACE_CTXT (1 << 13) /* Main context tracking */ #define PVR2_TRACE_SYSFS (1 << 14) /* Sysfs driven I/O */ #define PVR2_TRACE_FIRMWARE (1 << 15) /* firmware upload actions */ #define PVR2_TRACE_CHIPS (1 << 16) /* chip broadcast operation */ @@ -54,6 +54,7 @@ extern int pvrusb2_debug; #define PVR2_TRACE_DATA_FLOW (1 << 25) /* Track data flow */ #define PVR2_TRACE_DEBUGIFC (1 << 26) /* Debug interface actions */ #define PVR2_TRACE_GPIO (1 << 27) /* GPIO state bit changes */ +#define PVR2_TRACE_DVB_FEED (1 << 28) /* DVB transport feed debug */ #endif /* __PVRUSB2_HDW_INTERNAL_H */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c index b0687430fdd..b53121c78ff 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c +++ b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c @@ -164,6 +164,8 @@ int pvr2_debugifc_print_status(struct pvr2_hdw *hdw, int ccnt; int ret; u32 gpio_dir,gpio_in,gpio_out; + struct pvr2_stream_stats stats; + struct pvr2_stream *sp; ret = pvr2_hdw_is_hsm(hdw); ccnt = scnprintf(buf,acnt,"USB link speed: %s\n", @@ -182,6 +184,24 @@ int pvr2_debugifc_print_status(struct pvr2_hdw *hdw, pvr2_hdw_get_streaming(hdw) ? "on" : "off"); bcnt += ccnt; acnt -= ccnt; buf += ccnt; + + sp = pvr2_hdw_get_video_stream(hdw); + if (sp) { + pvr2_stream_get_stats(sp, &stats, 0); + ccnt = scnprintf( + buf,acnt, + "Bytes streamed=%u" + " URBs: queued=%u idle=%u ready=%u" + " processed=%u failed=%u\n", + stats.bytes_processed, + stats.buffers_in_queue, + stats.buffers_in_idle, + stats.buffers_in_ready, + stats.buffers_processed, + stats.buffers_failed); + bcnt += ccnt; acnt -= ccnt; buf += ccnt; + } + return bcnt; } @@ -220,6 +240,10 @@ static int pvr2_debugifc_do1cmd(struct pvr2_hdw *hdw,const char *buf, return pvr2_hdw_cmd_decoder_reset(hdw); } else if (debugifc_match_keyword(wptr,wlen,"worker")) { return pvr2_hdw_untrip(hdw); + } else if (debugifc_match_keyword(wptr,wlen,"usbstats")) { + pvr2_stream_get_stats(pvr2_hdw_get_video_stream(hdw), + NULL, !0); + return 0; } return -EINVAL; } else if (debugifc_match_keyword(wptr,wlen,"cpufw")) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 4df6d6d936f..5bf6d8fda1f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -32,7 +32,16 @@ pvr2_device_desc structures. /* This is needed in order to pull in tuner type ids... */ #include <linux/i2c.h> #include <media/tuner.h> - +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +#include "pvrusb2-hdw-internal.h" +#include "lgdt330x.h" +#include "s5h1409.h" +#include "s5h1411.h" +#include "tda10048.h" +#include "tda18271.h" +#include "tda8290.h" +#include "tuner-simple.h" +#endif /*------------------------------------------------------------------------*/ @@ -49,14 +58,19 @@ static const char *pvr2_fw1_names_29xxx[] = { }; static const struct pvr2_device_desc pvr2_device_29xxx = { - .description = "WinTV PVR USB2 Model Category 29xxxx", + .description = "WinTV PVR USB2 Model Category 29xxx", .shortname = "29xxx", .client_modules.lst = pvr2_client_29xxx, .client_modules.cnt = ARRAY_SIZE(pvr2_client_29xxx), .fx2_firmware.lst = pvr2_fw1_names_29xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_fmradio = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, }; @@ -75,7 +89,7 @@ static const char *pvr2_fw1_names_24xxx[] = { }; static const struct pvr2_device_desc pvr2_device_24xxx = { - .description = "WinTV PVR USB2 Model Category 24xxxx", + .description = "WinTV PVR USB2 Model Category 24xxx", .shortname = "24xxx", .client_modules.lst = pvr2_client_24xxx, .client_modules.cnt = ARRAY_SIZE(pvr2_client_24xxx), @@ -85,7 +99,12 @@ static const struct pvr2_device_desc pvr2_device_24xxx = { .flag_has_wm8775 = !0, .flag_has_hauppauge_rom = !0, .flag_has_hauppauge_custom_ir = !0, + .flag_has_analogtuner = !0, + .flag_has_fmradio = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, }; @@ -105,15 +124,70 @@ static const struct pvr2_device_desc pvr2_device_gotview_2 = { .client_modules.cnt = ARRAY_SIZE(pvr2_client_gotview_2), .flag_has_cx25840 = !0, .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .flag_has_analogtuner = !0, + .flag_has_fmradio = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, +}; + + + +/*------------------------------------------------------------------------*/ +/* GOTVIEW USB2.0 DVD Deluxe */ + +/* (same module list as gotview_2) */ + +static const struct pvr2_device_desc pvr2_device_gotview_2d = { + .description = "Gotview USB 2.0 DVD Deluxe", + .shortname = "gv2d", + .client_modules.lst = pvr2_client_gotview_2, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_gotview_2), + .flag_has_cx25840 = !0, + .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, }; -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR /*------------------------------------------------------------------------*/ /* OnAir Creator */ +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct lgdt330x_config pvr2_lgdt3303_config = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .clock_polarity_flip = 1, +}; + +static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe) + return 0; + + return -EIO; +} + +static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe, + &adap->channel.hdw->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF); + + return 0; +} + +struct pvr2_dvb_props pvr2_onair_creator_fe_props = { + .frontend_attach = pvr2_lgdt3303_attach, + .tuner_attach = pvr2_lgh06xf_attach, +}; +#endif + static const char *pvr2_client_onair_creator[] = { "saa7115", "tuner", @@ -126,16 +200,54 @@ static const struct pvr2_device_desc pvr2_device_onair_creator = { .client_modules.lst = pvr2_client_onair_creator, .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair_creator), .default_tuner_type = TUNER_LG_TDVS_H06XF, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .flag_digital_requires_cx23416 = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, -}; + .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, + .default_std_mask = V4L2_STD_NTSC_M, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_onair_creator_fe_props, #endif +}; -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 /*------------------------------------------------------------------------*/ /* OnAir USB 2.0 */ +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct lgdt330x_config pvr2_lgdt3302_config = { + .demod_address = 0x0e, + .demod_chip = LGDT3302, +}; + +static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe) + return 0; + + return -EIO; +} + +static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe, + &adap->channel.hdw->i2c_adap, 0x61, + TUNER_PHILIPS_FCV1236D); + + return 0; +} + +struct pvr2_dvb_props pvr2_onair_usb2_fe_props = { + .frontend_attach = pvr2_lgdt3302_attach, + .tuner_attach = pvr2_fcv1236d_attach, +}; +#endif + static const char *pvr2_client_onair_usb2[] = { "saa7115", "tuner", @@ -147,16 +259,176 @@ static const struct pvr2_device_desc pvr2_device_onair_usb2 = { .shortname = "oa2", .client_modules.lst = pvr2_client_onair_usb2, .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair_usb2), - .default_tuner_type = TUNER_PHILIPS_ATSC, + .default_tuner_type = TUNER_PHILIPS_FCV1236D, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .flag_digital_requires_cx23416 = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, + .default_std_mask = V4L2_STD_NTSC_M, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_onair_usb2_fe_props, +#endif +}; + + + +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 73xxx */ + +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct tda10048_config hauppauge_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_50, + .inversion = TDA10048_INVERSION_ON, +}; + +static struct tda829x_config tda829x_no_probe = { + .probe_tuner = TDA829X_DONT_PROBE, }; + +static struct tda18271_config hauppauge_tda18271_dvb_config = { + .gate = TDA18271_GATE_ANALOG, +}; + +static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe = dvb_attach(tda10048_attach, &hauppauge_tda10048_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe) + return 0; + + return -EIO; +} + +static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(tda829x_attach, adap->fe, + &adap->channel.hdw->i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, adap->fe, 0x60, + &adap->channel.hdw->i2c_adap, + &hauppauge_tda18271_dvb_config); + + return 0; +} + +struct pvr2_dvb_props pvr2_73xxx_dvb_props = { + .frontend_attach = pvr2_tda10048_attach, + .tuner_attach = pvr2_73xxx_tda18271_8295_attach, +}; +#endif + +static const char *pvr2_client_73xxx[] = { + "cx25840", + "tuner", +}; + +static const char *pvr2_fw1_names_73xxx[] = { + "v4l-pvrusb2-73xxx-01.fw", +}; + +static const struct pvr2_device_desc pvr2_device_73xxx = { + .description = "WinTV PVR USB2 Model Category 73xxx", + .shortname = "73xxx", + .client_modules.lst = pvr2_client_73xxx, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_73xxx), + .fx2_firmware.lst = pvr2_fw1_names_73xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), + .flag_has_cx25840 = !0, + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_73xxx_dvb_props, #endif +}; /*------------------------------------------------------------------------*/ /* Hauppauge PVR-USB2 Model 75xxx */ +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +static struct s5h1409_config pvr2_s5h1409_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .qam_if = 4000, + .inversion = S5H1409_INVERSION_ON, + .status_mode = S5H1409_DEMODLOCKING, +}; + +static struct s5h1411_config pvr2_s5h1411_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37, }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config hauppauge_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, +}; + +static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe) + return 0; + + return -EIO; +} + +static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap) +{ + adap->fe = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config, + &adap->channel.hdw->i2c_adap); + if (adap->fe) + return 0; + + return -EIO; +} + +static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) +{ + dvb_attach(tda829x_attach, adap->fe, + &adap->channel.hdw->i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, adap->fe, 0x60, + &adap->channel.hdw->i2c_adap, + &hauppauge_tda18271_config); + + return 0; +} + +struct pvr2_dvb_props pvr2_750xx_dvb_props = { + .frontend_attach = pvr2_s5h1409_attach, + .tuner_attach = pvr2_tda18271_8295_attach, +}; + +struct pvr2_dvb_props pvr2_751xx_dvb_props = { + .frontend_attach = pvr2_s5h1411_attach, + .tuner_attach = pvr2_tda18271_8295_attach, +}; +#endif + static const char *pvr2_client_75xxx[] = { "cx25840", "tuner", @@ -166,17 +438,46 @@ static const char *pvr2_fw1_names_75xxx[] = { "v4l-pvrusb2-73xxx-01.fw", }; -static const struct pvr2_device_desc pvr2_device_75xxx = { - .description = "WinTV PVR USB2 Model Category 75xxxx", - .shortname = "75xxx", +static const struct pvr2_device_desc pvr2_device_750xx = { + .description = "WinTV PVR USB2 Model Category 750xx", + .shortname = "750xx", + .client_modules.lst = pvr2_client_75xxx, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_75xxx), + .fx2_firmware.lst = pvr2_fw1_names_75xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), + .flag_has_cx25840 = !0, + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .default_std_mask = V4L2_STD_NTSC_M, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_750xx_dvb_props, +#endif +}; + +static const struct pvr2_device_desc pvr2_device_751xx = { + .description = "WinTV PVR USB2 Model Category 751xx", + .shortname = "751xx", .client_modules.lst = pvr2_client_75xxx, .client_modules.cnt = ARRAY_SIZE(pvr2_client_75xxx), .fx2_firmware.lst = pvr2_fw1_names_75xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), .flag_has_cx25840 = !0, .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, .default_std_mask = V4L2_STD_NTSC_M, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + .dvb_props = &pvr2_751xx_dvb_props, +#endif }; @@ -190,16 +491,18 @@ struct usb_device_id pvr2_device_table[] = { .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, { USB_DEVICE(0x1164, 0x0622), .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2}, -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR + { USB_DEVICE(0x1164, 0x0602), + .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d}, { USB_DEVICE(0x11ba, 0x1003), .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator}, -#endif -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 { USB_DEVICE(0x11ba, 0x1001), .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, -#endif + { USB_DEVICE(0x2040, 0x7300), + .driver_info = (kernel_ulong_t)&pvr2_device_73xxx}, { USB_DEVICE(0x2040, 0x7500), - .driver_info = (kernel_ulong_t)&pvr2_device_75xxx}, + .driver_info = (kernel_ulong_t)&pvr2_device_750xx}, + { USB_DEVICE(0x2040, 0x7501), + .driver_info = (kernel_ulong_t)&pvr2_device_751xx}, { } }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index 64b467f0637..d016f8b6c70 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -23,6 +23,9 @@ #include <linux/mod_devicetable.h> #include <linux/videodev2.h> +#ifdef CONFIG_VIDEO_PVRUSB2_DVB +#include "pvrusb2-dvb.h" +#endif /* @@ -39,6 +42,13 @@ struct pvr2_string_table { #define PVR2_ROUTING_SCHEME_HAUPPAUGE 0 #define PVR2_ROUTING_SCHEME_GOTVIEW 1 +#define PVR2_DIGITAL_SCHEME_NONE 0 +#define PVR2_DIGITAL_SCHEME_HAUPPAUGE 1 +#define PVR2_DIGITAL_SCHEME_ONAIR 2 + +#define PVR2_LED_SCHEME_NONE 0 +#define PVR2_LED_SCHEME_HAUPPAUGE 1 + /* This describes a particular hardware type (except for the USB device ID which must live in a separate structure due to environmental constraints). See the top of pvrusb2-hdw.c for where this is @@ -58,40 +68,64 @@ struct pvr2_device_desc { was initialized from internal ROM. */ struct pvr2_string_table fx2_firmware; +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + /* callback functions to handle attachment of digital tuner & demod */ + struct pvr2_dvb_props *dvb_props; + +#endif + /* Initial standard bits to use for this device, if not zero. + Anything set here is also implied as an available standard. + Note: This is ignored if overridden on the module load line via + the video_std module option. */ + v4l2_std_id default_std_mask; + + /* V4L tuner type ID to use with this device (only used if the + driver could not discover the type any other way). */ + int default_tuner_type; + /* Signal routing scheme used by device, contains one of PVR2_ROUTING_SCHEME_XXX. Schemes have to be defined as we encounter them. This is an arbitrary integer scheme id; its meaning is contained entirely within the driver and is interpreted by logic which must send commands to the chip-level drivers (search for things which touch this field). */ - unsigned int signal_routing_scheme; + unsigned char signal_routing_scheme; - /* V4L tuner type ID to use with this device (only used if the - driver could not discover the type any other way). */ - int default_tuner_type; + /* Indicates scheme for controlling device's LED (if any). The + driver will turn on the LED when streaming is underway. This + contains one of PVR2_LED_SCHEME_XXX. */ + unsigned char led_scheme; - /* Initial standard bits to use for this device, if not zero. - Anything set here is also implied as an available standard. - Note: This is ignored if overridden on the module load line via - the video_std module option. */ - v4l2_std_id default_std_mask; + /* Control scheme to use if there is a digital tuner. This + contains one of PVR2_DIGITAL_SCHEME_XXX. This is an arbitrary + integer scheme id; its meaning is contained entirely within the + driver and is interpreted by logic which must control the + streaming pathway (search for things which touch this field). */ + unsigned char digital_control_scheme; /* If set, we don't bother trying to load cx23416 firmware. */ - char flag_skip_cx23416_firmware; + unsigned int flag_skip_cx23416_firmware:1; + + /* If set, the encoder must be healthy in order for digital mode to + work (otherwise we assume that digital streaming will work even + if we fail to locate firmware for the encoder). If the device + doesn't support digital streaming then this flag has no + effect. */ + unsigned int flag_digital_requires_cx23416:1; /* Device has a hauppauge eeprom which we can interrogate. */ - char flag_has_hauppauge_rom; + unsigned int flag_has_hauppauge_rom:1; /* Device does not require a powerup command to be issued. */ - char flag_no_powerup; + unsigned int flag_no_powerup:1; /* Device has a cx25840 - this enables special additional logic to handle it. */ - char flag_has_cx25840; + unsigned int flag_has_cx25840:1; /* Device has a wm8775 - this enables special additional logic to ensure that it is found. */ - char flag_has_wm8775; + unsigned int flag_has_wm8775:1; /* Device has IR hardware that can be faked into looking like a normal Hauppauge i2c IR receiver. This is currently very @@ -101,7 +135,15 @@ struct pvr2_device_desc { to virtualize the presence of the non-existant IR receiver chip and implement the virtual receiver in terms of appropriate FX2 commands. */ - char flag_has_hauppauge_custom_ir; + unsigned int flag_has_hauppauge_custom_ir:1; + + /* These bits define which kinds of sources the device can handle. + Note: Digital tuner presence is inferred by the + digital_control_scheme enumeration. */ + unsigned int flag_has_fmradio:1; /* Has FM radio receiver */ + unsigned int flag_has_analogtuner:1; /* Has analog tuner */ + unsigned int flag_has_composite:1; /* Has composite input */ + unsigned int flag_has_svideo:1; /* Has s-video input */ }; extern struct usb_device_id pvr2_device_table[]; diff --git a/drivers/media/video/pvrusb2/pvrusb2-dvb.c b/drivers/media/video/pvrusb2/pvrusb2-dvb.c new file mode 100644 index 00000000000..6ec4bf81fc7 --- /dev/null +++ b/drivers/media/video/pvrusb2/pvrusb2-dvb.c @@ -0,0 +1,433 @@ +/* + * pvrusb2-dvb.c - linux-dvb api interface to the pvrusb2 driver. + * + * Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kthread.h> +#include <linux/freezer.h> +#include "dvbdev.h" +#include "pvrusb2-debug.h" +#include "pvrusb2-hdw-internal.h" +#include "pvrusb2-hdw.h" +#include "pvrusb2-io.h" +#include "pvrusb2-dvb.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int pvr2_dvb_feed_func(struct pvr2_dvb_adapter *adap) +{ + int ret; + unsigned int count; + struct pvr2_buffer *bp; + struct pvr2_stream *stream; + + pvr2_trace(PVR2_TRACE_DVB_FEED, "dvb feed thread started"); + set_freezable(); + + stream = adap->channel.stream->stream; + + for (;;) { + if (kthread_should_stop()) break; + + /* Not sure about this... */ + try_to_freeze(); + + bp = pvr2_stream_get_ready_buffer(stream); + if (bp != NULL) { + count = pvr2_buffer_get_count(bp); + if (count) { + dvb_dmx_swfilter( + &adap->demux, + adap->buffer_storage[ + pvr2_buffer_get_id(bp)], + count); + } else { + ret = pvr2_buffer_get_status(bp); + if (ret < 0) break; + } + ret = pvr2_buffer_queue(bp); + if (ret < 0) break; + + /* Since we know we did something to a buffer, + just go back and try again. No point in + blocking unless we really ran out of + buffers to process. */ + continue; + } + + + /* Wait until more buffers become available or we're + told not to wait any longer. */ + ret = wait_event_interruptible( + adap->buffer_wait_data, + (pvr2_stream_get_ready_count(stream) > 0) || + kthread_should_stop()); + if (ret < 0) break; + } + + /* If we get here and ret is < 0, then an error has occurred. + Probably would be a good idea to communicate that to DVB core... */ + + pvr2_trace(PVR2_TRACE_DVB_FEED, "dvb feed thread stopped"); + + return 0; +} + +static int pvr2_dvb_feed_thread(void *data) +{ + int stat = pvr2_dvb_feed_func(data); + /* from videobuf-dvb.c: */ + while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } + return stat; +} + +static void pvr2_dvb_notify(struct pvr2_dvb_adapter *adap) +{ + wake_up(&adap->buffer_wait_data); +} + +static void pvr2_dvb_stream_end(struct pvr2_dvb_adapter *adap) +{ + unsigned int idx; + struct pvr2_stream *stream; + + if (adap->thread) { + kthread_stop(adap->thread); + adap->thread = NULL; + } + + if (adap->channel.stream) { + stream = adap->channel.stream->stream; + } else { + stream = NULL; + } + if (stream) { + pvr2_hdw_set_streaming(adap->channel.hdw, 0); + pvr2_stream_set_callback(stream, NULL, NULL); + pvr2_stream_kill(stream); + pvr2_stream_set_buffer_count(stream, 0); + pvr2_channel_claim_stream(&adap->channel, NULL); + } + + if (adap->stream_run) { + for (idx = 0; idx < PVR2_DVB_BUFFER_COUNT; idx++) { + if (!(adap->buffer_storage[idx])) continue; + kfree(adap->buffer_storage[idx]); + adap->buffer_storage[idx] = NULL; + } + adap->stream_run = 0; + } +} + +static int pvr2_dvb_stream_do_start(struct pvr2_dvb_adapter *adap) +{ + struct pvr2_context *pvr = adap->channel.mc_head; + unsigned int idx; + int ret; + struct pvr2_buffer *bp; + struct pvr2_stream *stream = NULL; + + if (adap->stream_run) return -EIO; + + ret = pvr2_channel_claim_stream(&adap->channel, &pvr->video_stream); + /* somebody else already has the stream */ + if (ret < 0) return ret; + + stream = adap->channel.stream->stream; + + for (idx = 0; idx < PVR2_DVB_BUFFER_COUNT; idx++) { + adap->buffer_storage[idx] = kmalloc(PVR2_DVB_BUFFER_SIZE, + GFP_KERNEL); + if (!(adap->buffer_storage[idx])) return -ENOMEM; + } + + pvr2_stream_set_callback(pvr->video_stream.stream, + (pvr2_stream_callback) pvr2_dvb_notify, adap); + + ret = pvr2_stream_set_buffer_count(stream, PVR2_DVB_BUFFER_COUNT); + if (ret < 0) return ret; + + for (idx = 0; idx < PVR2_DVB_BUFFER_COUNT; idx++) { + bp = pvr2_stream_get_buffer(stream, idx); + pvr2_buffer_set_buffer(bp, + adap->buffer_storage[idx], + PVR2_DVB_BUFFER_SIZE); + } + + ret = pvr2_hdw_set_streaming(adap->channel.hdw, 1); + if (ret < 0) return ret; + + while ((bp = pvr2_stream_get_idle_buffer(stream)) != NULL) { + ret = pvr2_buffer_queue(bp); + if (ret < 0) return ret; + } + + adap->thread = kthread_run(pvr2_dvb_feed_thread, adap, "pvrusb2-dvb"); + + if (IS_ERR(adap->thread)) { + ret = PTR_ERR(adap->thread); + adap->thread = NULL; + return ret; + } + + adap->stream_run = !0; + + return 0; +} + +static int pvr2_dvb_stream_start(struct pvr2_dvb_adapter *adap) +{ + int ret = pvr2_dvb_stream_do_start(adap); + if (ret < 0) pvr2_dvb_stream_end(adap); + return ret; +} + +static int pvr2_dvb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + struct pvr2_dvb_adapter *adap = dvbdmxfeed->demux->priv; + int ret = 0; + + if (adap == NULL) return -ENODEV; + + mutex_lock(&adap->lock); + do { + if (onoff) { + if (!adap->feedcount) { + pvr2_trace(PVR2_TRACE_DVB_FEED, + "start feeding demux"); + ret = pvr2_dvb_stream_start(adap); + if (ret < 0) break; + } + (adap->feedcount)++; + } else if (adap->feedcount > 0) { + (adap->feedcount)--; + if (!adap->feedcount) { + pvr2_trace(PVR2_TRACE_DVB_FEED, + "stop feeding demux"); + pvr2_dvb_stream_end(adap); + } + } + } while (0); + mutex_unlock(&adap->lock); + + return ret; +} + +static int pvr2_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + pvr2_trace(PVR2_TRACE_DVB_FEED, "start pid: 0x%04x", dvbdmxfeed->pid); + return pvr2_dvb_ctrl_feed(dvbdmxfeed, 1); +} + +static int pvr2_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + pvr2_trace(PVR2_TRACE_DVB_FEED, "stop pid: 0x%04x", dvbdmxfeed->pid); + return pvr2_dvb_ctrl_feed(dvbdmxfeed, 0); +} + +static int pvr2_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire) +{ + struct pvr2_dvb_adapter *adap = fe->dvb->priv; + return pvr2_channel_limit_inputs( + &adap->channel, + (acquire ? (1 << PVR2_CVAL_INPUT_DTV) : 0)); +} + +static int pvr2_dvb_adapter_init(struct pvr2_dvb_adapter *adap) +{ + int ret; + + ret = dvb_register_adapter(&adap->dvb_adap, "pvrusb2-dvb", + THIS_MODULE/*&hdw->usb_dev->owner*/, + &adap->channel.hdw->usb_dev->dev, + adapter_nr); + if (ret < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "dvb_register_adapter failed: error %d", ret); + goto err; + } + adap->dvb_adap.priv = adap; + + adap->demux.dmx.capabilities = DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + adap->demux.priv = adap; + adap->demux.filternum = 256; + adap->demux.feednum = 256; + adap->demux.start_feed = pvr2_dvb_start_feed; + adap->demux.stop_feed = pvr2_dvb_stop_feed; + adap->demux.write_to_decoder = NULL; + + ret = dvb_dmx_init(&adap->demux); + if (ret < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "dvb_dmx_init failed: error %d", ret); + goto err_dmx; + } + + adap->dmxdev.filternum = adap->demux.filternum; + adap->dmxdev.demux = &adap->demux.dmx; + adap->dmxdev.capabilities = 0; + + ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap); + if (ret < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "dvb_dmxdev_init failed: error %d", ret); + goto err_dmx_dev; + } + + dvb_net_init(&adap->dvb_adap, &adap->dvb_net, &adap->demux.dmx); + + return 0; + +err_dmx_dev: + dvb_dmx_release(&adap->demux); +err_dmx: + dvb_unregister_adapter(&adap->dvb_adap); +err: + return ret; +} + +static int pvr2_dvb_adapter_exit(struct pvr2_dvb_adapter *adap) +{ + pvr2_trace(PVR2_TRACE_INFO, "unregistering DVB devices"); + dvb_net_release(&adap->dvb_net); + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); + dvb_dmx_release(&adap->demux); + dvb_unregister_adapter(&adap->dvb_adap); + return 0; +} + +static int pvr2_dvb_frontend_init(struct pvr2_dvb_adapter *adap) +{ + struct pvr2_hdw *hdw = adap->channel.hdw; + struct pvr2_dvb_props *dvb_props = hdw->hdw_desc->dvb_props; + int ret = 0; + + if (dvb_props == NULL) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, "fe_props not defined!"); + return -EINVAL; + } + + ret = pvr2_channel_limit_inputs( + &adap->channel, + (1 << PVR2_CVAL_INPUT_DTV)); + if (ret) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "failed to grab control of dtv input (code=%d)", + ret); + return ret; + } + + if (dvb_props->frontend_attach == NULL) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "frontend_attach not defined!"); + ret = -EINVAL; + goto done; + } + + if ((dvb_props->frontend_attach(adap) == 0) && (adap->fe)) { + + if (dvb_register_frontend(&adap->dvb_adap, adap->fe)) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "frontend registration failed!"); + dvb_frontend_detach(adap->fe); + adap->fe = NULL; + ret = -ENODEV; + goto done; + } + + if (dvb_props->tuner_attach) + dvb_props->tuner_attach(adap); + + if (adap->fe->ops.analog_ops.standby) + adap->fe->ops.analog_ops.standby(adap->fe); + + /* Ensure all frontends negotiate bus access */ + adap->fe->ops.ts_bus_ctrl = pvr2_dvb_bus_ctrl; + + } else { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "no frontend was attached!"); + ret = -ENODEV; + return ret; + } + + done: + pvr2_channel_limit_inputs(&adap->channel, 0); + return ret; +} + +static int pvr2_dvb_frontend_exit(struct pvr2_dvb_adapter *adap) +{ + if (adap->fe != NULL) { + dvb_unregister_frontend(adap->fe); + dvb_frontend_detach(adap->fe); + } + return 0; +} + +static void pvr2_dvb_destroy(struct pvr2_dvb_adapter *adap) +{ + pvr2_dvb_stream_end(adap); + pvr2_dvb_frontend_exit(adap); + pvr2_dvb_adapter_exit(adap); + pvr2_channel_done(&adap->channel); + kfree(adap); +} + +static void pvr2_dvb_internal_check(struct pvr2_channel *chp) +{ + struct pvr2_dvb_adapter *adap; + adap = container_of(chp, struct pvr2_dvb_adapter, channel); + if (!adap->channel.mc_head->disconnect_flag) return; + pvr2_dvb_destroy(adap); +} + +struct pvr2_dvb_adapter *pvr2_dvb_create(struct pvr2_context *pvr) +{ + int ret = 0; + struct pvr2_dvb_adapter *adap; + if (!pvr->hdw->hdw_desc->dvb_props) { + /* Device lacks a digital interface so don't set up + the DVB side of the driver either. For now. */ + return NULL; + } + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (!adap) return adap; + pvr2_channel_init(&adap->channel, pvr); + adap->channel.check_func = pvr2_dvb_internal_check; + init_waitqueue_head(&adap->buffer_wait_data); + mutex_init(&adap->lock); + ret = pvr2_dvb_adapter_init(adap); + if (ret < 0) goto fail1; + ret = pvr2_dvb_frontend_init(adap); + if (ret < 0) goto fail2; + return adap; + +fail2: + pvr2_dvb_adapter_exit(adap); +fail1: + pvr2_channel_done(&adap->channel); + return NULL; +} + diff --git a/drivers/media/video/pvrusb2/pvrusb2-dvb.h b/drivers/media/video/pvrusb2/pvrusb2-dvb.h new file mode 100644 index 00000000000..884ff916a35 --- /dev/null +++ b/drivers/media/video/pvrusb2/pvrusb2-dvb.h @@ -0,0 +1,41 @@ +#ifndef __PVRUSB2_DVB_H__ +#define __PVRUSB2_DVB_H__ + +#include "dvb_frontend.h" +#include "dvb_demux.h" +#include "dvb_net.h" +#include "dmxdev.h" +#include "pvrusb2-context.h" + +#define PVR2_DVB_BUFFER_COUNT 32 +#define PVR2_DVB_BUFFER_SIZE PAGE_ALIGN(0x4000) + +struct pvr2_dvb_adapter { + struct pvr2_channel channel; + + struct dvb_adapter dvb_adap; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvb_net; + struct dvb_frontend *fe; + + int feedcount; + int max_feed_count; + + struct task_struct *thread; + struct mutex lock; + + unsigned int stream_run:1; + + wait_queue_head_t buffer_wait_data; + char *buffer_storage[PVR2_DVB_BUFFER_COUNT]; +}; + +struct pvr2_dvb_props { + int (*frontend_attach) (struct pvr2_dvb_adapter *); + int (*tuner_attach) (struct pvr2_dvb_adapter *); +}; + +struct pvr2_dvb_adapter *pvr2_dvb_create(struct pvr2_context *pvr); + +#endif /* __PVRUSB2_DVB_H__ */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index 64062879981..c46d367f747 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -278,11 +278,20 @@ static int pvr2_encoder_cmd(void *ctxt, ret = -EBUSY; } if (ret) { + del_timer_sync(&hdw->encoder_run_timer); hdw->state_encoder_ok = 0; pvr2_trace(PVR2_TRACE_STBITS, "State bit %s <-- %s", "state_encoder_ok", (hdw->state_encoder_ok ? "true" : "false")); + if (hdw->state_encoder_runok) { + hdw->state_encoder_runok = 0; + pvr2_trace(PVR2_TRACE_STBITS, + "State bit %s <-- %s", + "state_encoder_runok", + (hdw->state_encoder_runok ? + "true" : "false")); + } pvr2_trace( PVR2_TRACE_ERROR_LEGS, "Giving up on command." @@ -480,10 +489,6 @@ int pvr2_encoder_start(struct pvr2_hdw *hdw) /* unmask some interrupts */ pvr2_write_register(hdw, 0x0048, 0xbfffffff); - /* change some GPIO data */ - pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000481); - pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000000); - pvr2_encoder_vcmd(hdw,CX2341X_ENC_MUTE_VIDEO,1, hdw->input_val == PVR2_CVAL_INPUT_RADIO ? 1 : 0); @@ -526,12 +531,6 @@ int pvr2_encoder_stop(struct pvr2_hdw *hdw) break; } - /* change some GPIO data */ - /* Note: Bit d7 of dir appears to control the LED. So we shut it - off here. */ - pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000401); - pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000000); - return status; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h b/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h index ffbc6d09610..abaada31e66 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h +++ b/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h @@ -22,32 +22,41 @@ #ifndef _PVRUSB2_FX2_CMD_H_ #define _PVRUSB2_FX2_CMD_H_ -#define FX2CMD_MEM_WRITE_DWORD 0x01 -#define FX2CMD_MEM_READ_DWORD 0x02 +#define FX2CMD_MEM_WRITE_DWORD 0x01u +#define FX2CMD_MEM_READ_DWORD 0x02u -#define FX2CMD_MEM_READ_64BYTES 0x28 +#define FX2CMD_MEM_READ_64BYTES 0x28u -#define FX2CMD_REG_WRITE 0x04 -#define FX2CMD_REG_READ 0x05 -#define FX2CMD_MEMSEL 0x06 +#define FX2CMD_REG_WRITE 0x04u +#define FX2CMD_REG_READ 0x05u +#define FX2CMD_MEMSEL 0x06u -#define FX2CMD_I2C_WRITE 0x08 -#define FX2CMD_I2C_READ 0x09 +#define FX2CMD_I2C_WRITE 0x08u +#define FX2CMD_I2C_READ 0x09u -#define FX2CMD_GET_USB_SPEED 0x0b +#define FX2CMD_GET_USB_SPEED 0x0bu -#define FX2CMD_STREAMING_ON 0x36 -#define FX2CMD_STREAMING_OFF 0x37 +#define FX2CMD_STREAMING_ON 0x36u +#define FX2CMD_STREAMING_OFF 0x37u -#define FX2CMD_FWPOST1 0x52 +#define FX2CMD_FWPOST1 0x52u -#define FX2CMD_POWER_OFF 0xdc -#define FX2CMD_POWER_ON 0xde +#define FX2CMD_POWER_OFF 0xdcu +#define FX2CMD_POWER_ON 0xdeu -#define FX2CMD_DEEP_RESET 0xdd +#define FX2CMD_DEEP_RESET 0xddu -#define FX2CMD_GET_EEPROM_ADDR 0xeb -#define FX2CMD_GET_IR_CODE 0xec +#define FX2CMD_GET_EEPROM_ADDR 0xebu +#define FX2CMD_GET_IR_CODE 0xecu + +#define FX2CMD_HCW_DEMOD_RESETIN 0xf0u +#define FX2CMD_HCW_DTV_STREAMING_ON 0xf1u +#define FX2CMD_HCW_DTV_STREAMING_OFF 0xf2u + +#define FX2CMD_ONAIR_DTV_STREAMING_ON 0xa0u +#define FX2CMD_ONAIR_DTV_STREAMING_OFF 0xa1u +#define FX2CMD_ONAIR_DTV_POWER_ON 0xa2u +#define FX2CMD_ONAIR_DTV_POWER_OFF 0xa3u #endif /* _PVRUSB2_FX2_CMD_H_ */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index d7a216b41b7..a3fe251d6fd 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -163,6 +163,11 @@ struct pvr2_decoder_ctrl { #define FW1_STATE_RELOAD 3 #define FW1_STATE_OK 4 +/* What state the device is in if it is a hybrid */ +#define PVR2_PATHWAY_UNKNOWN 0 +#define PVR2_PATHWAY_ANALOG 1 +#define PVR2_PATHWAY_DIGITAL 2 + typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16); #define PVR2_I2C_FUNC_CNT 128 @@ -182,7 +187,6 @@ struct pvr2_hdw { struct workqueue_struct *workqueue; struct work_struct workpoll; /* Update driver state */ struct work_struct worki2csync; /* Update i2c clients */ - struct work_struct workinit; /* Driver initialization sequence */ /* Video spigot */ struct pvr2_stream *vid_stream; @@ -229,17 +233,19 @@ struct pvr2_hdw { /* Bits of state that describe what is going on with various parts of the driver. */ + int state_pathway_ok; /* Pathway config is ok */ int state_encoder_ok; /* Encoder is operational */ int state_encoder_run; /* Encoder is running */ int state_encoder_config; /* Encoder is configured */ int state_encoder_waitok; /* Encoder pre-wait done */ + int state_encoder_runok; /* Encoder has run for >= .25 sec */ int state_decoder_run; /* Decoder is running */ int state_usbstream_run; /* FX2 is streaming */ int state_decoder_quiescent; /* Decoder idle for > 50msec */ int state_pipeline_config; /* Pipeline is configured */ - int state_pipeline_req; /* Somebody wants to stream */ - int state_pipeline_pause; /* Pipeline must be paused */ - int state_pipeline_idle; /* Pipeline not running */ + int state_pipeline_req; /* Somebody wants to stream */ + int state_pipeline_pause; /* Pipeline must be paused */ + int state_pipeline_idle; /* Pipeline not running */ /* This is the master state of the driver. It is the combined result of other bits of state. Examining this will indicate the @@ -247,6 +253,9 @@ struct pvr2_hdw { PVR2_STATE_xxxx */ unsigned int master_state; + /* True if device led is currently on */ + int led_on; + /* True if states must be re-evaluated */ int state_stale; @@ -259,6 +268,9 @@ struct pvr2_hdw { /* Timer for measuring encoder pre-wait time */ struct timer_list encoder_wait_timer; + /* Timer for measuring encoder minimum run time */ + struct timer_list encoder_run_timer; + /* Place to block while waiting for state changes */ wait_queue_head_t state_wait_data; @@ -267,6 +279,7 @@ struct pvr2_hdw { int flag_disconnected; /* flag_ok == 0 due to disconnect */ int flag_init_ok; /* true if structure is fully initialized */ int fw1_state; /* current situation with fw1 */ + int pathway_state; /* one of PVR2_PATHWAY_xxx */ int flag_decoder_missed;/* We've noticed missing decoder */ int flag_tripped; /* Indicates overall failure to start */ @@ -323,6 +336,11 @@ struct pvr2_hdw { int v4l_minor_number_vbi; int v4l_minor_number_radio; + /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */ + unsigned int input_avail_mask; + /* Bit mask of PVR2_CVAL_INPUT choices which are currenly allowed */ + unsigned int input_allowed_mask; + /* Location of eeprom or a negative number if none */ int eeprom_addr; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 41ae980405e..0a868888f38 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -25,7 +25,6 @@ #include <linux/firmware.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> -#include <asm/semaphore.h> #include "pvrusb2.h" #include "pvrusb2-std.h" #include "pvrusb2-util.h" @@ -44,13 +43,13 @@ static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL}; static DEFINE_MUTEX(pvr2_unit_mtx); -static int ctlchg = 0; +static int ctlchg; static int initusbreset = 1; -static int procreload = 0; +static int procreload; static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 }; static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; -static int init_pause_msec = 0; +static int init_pause_msec; module_param(ctlchg, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value"); @@ -183,6 +182,7 @@ static const char *control_values_srate[] = { static const char *control_values_input[] = { [PVR2_CVAL_INPUT_TV] = "television", /*xawtv needs this name*/ + [PVR2_CVAL_INPUT_DTV] = "dtv", [PVR2_CVAL_INPUT_RADIO] = "radio", [PVR2_CVAL_INPUT_SVIDEO] = "s-video", [PVR2_CVAL_INPUT_COMPOSITE] = "composite", @@ -216,12 +216,45 @@ static const char *pvr2_state_names[] = { }; +struct pvr2_fx2cmd_descdef { + unsigned char id; + unsigned char *desc; +}; + +static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = { + {FX2CMD_MEM_WRITE_DWORD, "write encoder dword"}, + {FX2CMD_MEM_READ_DWORD, "read encoder dword"}, + {FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"}, + {FX2CMD_REG_WRITE, "write encoder register"}, + {FX2CMD_REG_READ, "read encoder register"}, + {FX2CMD_MEMSEL, "encoder memsel"}, + {FX2CMD_I2C_WRITE, "i2c write"}, + {FX2CMD_I2C_READ, "i2c read"}, + {FX2CMD_GET_USB_SPEED, "get USB speed"}, + {FX2CMD_STREAMING_ON, "stream on"}, + {FX2CMD_STREAMING_OFF, "stream off"}, + {FX2CMD_FWPOST1, "fwpost1"}, + {FX2CMD_POWER_OFF, "power off"}, + {FX2CMD_POWER_ON, "power on"}, + {FX2CMD_DEEP_RESET, "deep reset"}, + {FX2CMD_GET_EEPROM_ADDR, "get rom addr"}, + {FX2CMD_GET_IR_CODE, "get IR code"}, + {FX2CMD_HCW_DEMOD_RESETIN, "hcw demod resetin"}, + {FX2CMD_HCW_DTV_STREAMING_ON, "hcw dtv stream on"}, + {FX2CMD_HCW_DTV_STREAMING_OFF, "hcw dtv stream off"}, + {FX2CMD_ONAIR_DTV_STREAMING_ON, "onair dtv stream on"}, + {FX2CMD_ONAIR_DTV_STREAMING_OFF, "onair dtv stream off"}, + {FX2CMD_ONAIR_DTV_POWER_ON, "onair dtv power on"}, + {FX2CMD_ONAIR_DTV_POWER_OFF, "onair dtv power off"}, +}; + + +static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v); static void pvr2_hdw_state_sched(struct pvr2_hdw *); static int pvr2_hdw_state_eval(struct pvr2_hdw *); static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long); static void pvr2_hdw_worker_i2c(struct work_struct *work); static void pvr2_hdw_worker_poll(struct work_struct *work); -static void pvr2_hdw_worker_init(struct work_struct *work); static int pvr2_hdw_wait(struct pvr2_hdw *,int state); static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *); static void pvr2_hdw_state_log_state(struct pvr2_hdw *); @@ -232,6 +265,8 @@ static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw); static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw); static void pvr2_hdw_quiescent_timeout(unsigned long); static void pvr2_hdw_encoder_wait_timeout(unsigned long); +static void pvr2_hdw_encoder_run_timeout(unsigned long); +static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32); static int pvr2_send_request_ex(struct pvr2_hdw *hdw, unsigned int timeout,int probe_fl, void *write_data,unsigned int write_len, @@ -368,26 +403,14 @@ static int ctrl_get_input(struct pvr2_ctrl *cptr,int *vp) return 0; } -static int ctrl_set_input(struct pvr2_ctrl *cptr,int m,int v) +static int ctrl_check_input(struct pvr2_ctrl *cptr,int v) { - struct pvr2_hdw *hdw = cptr->hdw; - - if (hdw->input_val != v) { - hdw->input_val = v; - hdw->input_dirty = !0; - } + return ((1 << v) & cptr->hdw->input_allowed_mask) != 0; +} - /* Handle side effects - if we switch to a mode that needs the RF - tuner, then select the right frequency choice as well and mark - it dirty. */ - if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { - hdw->freqSelector = 0; - hdw->freqDirty = !0; - } else if (hdw->input_val == PVR2_CVAL_INPUT_TV) { - hdw->freqSelector = 1; - hdw->freqDirty = !0; - } - return 0; +static int ctrl_set_input(struct pvr2_ctrl *cptr,int m,int v) +{ + return pvr2_hdw_set_input(cptr->hdw,v); } static int ctrl_isdirty_input(struct pvr2_ctrl *cptr) @@ -804,6 +827,7 @@ static const struct pvr2_ctl_info control_defs[] = { .name = "input", .internal_id = PVR2_CID_INPUT, .default_value = PVR2_CVAL_INPUT_TV, + .check_value = ctrl_check_input, DEFREF(input), DEFENUM(control_values_input), },{ @@ -983,7 +1007,7 @@ unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *hdw) /* Set the currently tuned frequency and account for all possible driver-core side effects of this action. */ -void pvr2_hdw_set_cur_freq(struct pvr2_hdw *hdw,unsigned long val) +static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *hdw,unsigned long val) { if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { if (hdw->freqSelector) { @@ -1196,6 +1220,14 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) time we configure the encoder, then we'll fully configure it. */ hdw->enc_cur_valid = 0; + /* Encoder is about to be reset so note that as far as we're + concerned now, the encoder has never been run. */ + del_timer_sync(&hdw->encoder_run_timer); + if (hdw->state_encoder_runok) { + hdw->state_encoder_runok = 0; + trace_stbit("state_encoder_runok",hdw->state_encoder_runok); + } + /* First prepare firmware loading */ ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/ ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/ @@ -1213,19 +1245,14 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) ret |= pvr2_write_register(hdw, 0xaa04, 0x00057810); /*unknown*/ ret |= pvr2_write_register(hdw, 0xaa10, 0x00148500); /*unknown*/ ret |= pvr2_write_register(hdw, 0xaa18, 0x00840000); /*unknown*/ - LOCK_TAKE(hdw->ctl_lock); do { - hdw->cmd_buffer[0] = FX2CMD_FWPOST1; - ret |= pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); - hdw->cmd_buffer[0] = FX2CMD_MEMSEL; - hdw->cmd_buffer[1] = 0; - ret |= pvr2_send_request(hdw,hdw->cmd_buffer,2,NULL,0); - } while (0); LOCK_GIVE(hdw->ctl_lock); + ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_FWPOST1); + ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16)); if (ret) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "firmware2 upload prep failed, ret=%d",ret); release_firmware(fw_entry); - return ret; + goto done; } /* Now send firmware */ @@ -1238,7 +1265,8 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) " must be a multiple of %zu bytes", fw_files[fwidx],sizeof(u32)); release_firmware(fw_entry); - return -1; + ret = -EINVAL; + goto done; } fw_ptr = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL); @@ -1246,7 +1274,8 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) release_firmware(fw_entry); pvr2_trace(PVR2_TRACE_ERROR_LEGS, "failed to allocate memory for firmware2 upload"); - return -ENOMEM; + ret = -ENOMEM; + goto done; } pipe = usb_sndbulkpipe(hdw->usb_dev, PVR2_FIRMWARE_ENDPOINT); @@ -1277,23 +1306,27 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) if (ret) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "firmware2 upload transfer failure"); - return ret; + goto done; } /* Finish upload */ ret |= pvr2_write_register(hdw, 0x9054, 0xffffffff); /*reset hw blocks*/ ret |= pvr2_write_register(hdw, 0x9058, 0xffffffe8); /*VPU ctrl*/ - LOCK_TAKE(hdw->ctl_lock); do { - hdw->cmd_buffer[0] = FX2CMD_MEMSEL; - hdw->cmd_buffer[1] = 0; - ret |= pvr2_send_request(hdw,hdw->cmd_buffer,2,NULL,0); - } while (0); LOCK_GIVE(hdw->ctl_lock); + ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16)); if (ret) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "firmware2 upload post-proc failure"); } + + done: + if (hdw->hdw_desc->signal_routing_scheme == + PVR2_ROUTING_SCHEME_GOTVIEW) { + /* Ensure that GPIO 11 is set to output for GOTVIEW + hardware. */ + pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0); + } return ret; } @@ -1365,11 +1398,6 @@ int pvr2_hdw_untrip(struct pvr2_hdw *hdw) } -const char *pvr2_hdw_get_state_name(unsigned int id) -{ - if (id >= ARRAY_SIZE(pvr2_state_names)) return NULL; - return pvr2_state_names[id]; -} int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw) @@ -1496,7 +1524,7 @@ struct pvr2_std_hack { default - which can always be overridden explicitly - and if the user has otherwise named a default then that default will always be used in place of this table. */ -const static struct pvr2_std_hack std_eeprom_maps[] = { +static const struct pvr2_std_hack std_eeprom_maps[] = { { /* PAL(B/G) */ .pat = V4L2_STD_B|V4L2_STD_GH, .std = V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_PAL_G, @@ -1713,6 +1741,13 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) if (!pvr2_hdw_dev_ok(hdw)) return; + if (hdw->hdw_desc->signal_routing_scheme == + PVR2_ROUTING_SCHEME_GOTVIEW) { + /* Ensure that GPIO 11 is set to output for GOTVIEW + hardware. */ + pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0); + } + pvr2_hdw_commit_setup(hdw); hdw->vid_stream = pvr2_stream_create(); @@ -1806,12 +1841,37 @@ static void pvr2_hdw_setup(struct pvr2_hdw *hdw) } -/* Create and return a structure for interacting with the underlying - hardware */ +/* Perform second stage initialization. Set callback pointer first so that + we can avoid a possible initialization race (if the kernel thread runs + before the callback has been set). */ +int pvr2_hdw_initialize(struct pvr2_hdw *hdw, + void (*callback_func)(void *), + void *callback_data) +{ + LOCK_TAKE(hdw->big_lock); do { + if (hdw->flag_disconnected) { + /* Handle a race here: If we're already + disconnected by this point, then give up. If we + get past this then we'll remain connected for + the duration of initialization since the entire + initialization sequence is now protected by the + big_lock. */ + break; + } + hdw->state_data = callback_data; + hdw->state_func = callback_func; + pvr2_hdw_setup(hdw); + } while (0); LOCK_GIVE(hdw->big_lock); + return hdw->flag_init_ok; +} + + +/* Create, set up, and return a structure for interacting with the + underlying hardware. */ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, const struct usb_device_id *devid) { - unsigned int idx,cnt1,cnt2; + unsigned int idx,cnt1,cnt2,m; struct pvr2_hdw *hdw; int valid_std_mask; struct pvr2_ctrl *cptr; @@ -1835,6 +1895,10 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, hdw->encoder_wait_timer.data = (unsigned long)hdw; hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout; + init_timer(&hdw->encoder_run_timer); + hdw->encoder_run_timer.data = (unsigned long)hdw; + hdw->encoder_run_timer.function = pvr2_hdw_encoder_run_timeout; + hdw->master_state = PVR2_STATE_DEAD; init_waitqueue_head(&hdw->state_wait_data); @@ -1842,6 +1906,26 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, hdw->tuner_signal_stale = !0; cx2341x_fill_defaults(&hdw->enc_ctl_state); + /* Calculate which inputs are OK */ + m = 0; + if (hdw_desc->flag_has_analogtuner) m |= 1 << PVR2_CVAL_INPUT_TV; + if (hdw_desc->digital_control_scheme != PVR2_DIGITAL_SCHEME_NONE) { + m |= 1 << PVR2_CVAL_INPUT_DTV; + } + if (hdw_desc->flag_has_svideo) m |= 1 << PVR2_CVAL_INPUT_SVIDEO; + if (hdw_desc->flag_has_composite) m |= 1 << PVR2_CVAL_INPUT_COMPOSITE; + if (hdw_desc->flag_has_fmradio) m |= 1 << PVR2_CVAL_INPUT_RADIO; + hdw->input_avail_mask = m; + hdw->input_allowed_mask = hdw->input_avail_mask; + + /* If not a hybrid device, pathway_state never changes. So + initialize it here to what it should forever be. */ + if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_DTV))) { + hdw->pathway_state = PVR2_PATHWAY_ANALOG; + } else if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_TV))) { + hdw->pathway_state = PVR2_PATHWAY_DIGITAL; + } + hdw->control_cnt = CTRLDEF_COUNT; hdw->control_cnt += MPEGDEF_COUNT; hdw->controls = kzalloc(sizeof(struct pvr2_ctrl) * hdw->control_cnt, @@ -1859,6 +1943,15 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, cptr = hdw->controls + idx; cptr->info = control_defs+idx; } + + /* Ensure that default input choice is a valid one. */ + m = hdw->input_avail_mask; + if (m) for (idx = 0; idx < (sizeof(m) << 3); idx++) { + if (!((1 << idx) & m)) continue; + hdw->input_val = idx; + break; + } + /* Define and configure additional controls from cx2341x module. */ hdw->mpeg_ctrl_info = kzalloc( sizeof(*(hdw->mpeg_ctrl_info)) * MPEGDEF_COUNT, GFP_KERNEL); @@ -1982,7 +2075,6 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, hdw->workqueue = create_singlethread_workqueue(hdw->name); INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll); INIT_WORK(&hdw->worki2csync,pvr2_hdw_worker_i2c); - INIT_WORK(&hdw->workinit,pvr2_hdw_worker_init); pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s", hdw->unit_number,hdw->name); @@ -2004,11 +2096,11 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, mutex_init(&hdw->ctl_lock_mutex); mutex_init(&hdw->big_lock_mutex); - queue_work(hdw->workqueue,&hdw->workinit); return hdw; fail: if (hdw) { del_timer_sync(&hdw->quiescent_timer); + del_timer_sync(&hdw->encoder_run_timer); del_timer_sync(&hdw->encoder_wait_timer); if (hdw->workqueue) { flush_workqueue(hdw->workqueue); @@ -2065,13 +2157,14 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw) { if (!hdw) return; pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw); - del_timer_sync(&hdw->quiescent_timer); - del_timer_sync(&hdw->encoder_wait_timer); if (hdw->workqueue) { flush_workqueue(hdw->workqueue); destroy_workqueue(hdw->workqueue); hdw->workqueue = NULL; } + del_timer_sync(&hdw->quiescent_timer); + del_timer_sync(&hdw->encoder_run_timer); + del_timer_sync(&hdw->encoder_wait_timer); if (hdw->fw_buffer) { kfree(hdw->fw_buffer); hdw->fw_buffer = NULL; @@ -2291,7 +2384,7 @@ static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw) for (idx = 0; idx < hdw->control_cnt; idx++) { cptr = hdw->controls + idx; - if (cptr->info->is_dirty == 0) continue; + if (!cptr->info->is_dirty) continue; if (!cptr->info->is_dirty(cptr)) continue; commit_flag = !0; @@ -2353,6 +2446,18 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) } } + if (hdw->input_dirty && hdw->state_pathway_ok && + (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ? + PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) != + hdw->pathway_state)) { + /* Change of mode being asked for... */ + hdw->state_pathway_ok = 0; + trace_stbit("state_pathway_ok",hdw->state_pathway_ok); + } + if (!hdw->state_pathway_ok) { + /* Can't commit anything until pathway is ok. */ + return 0; + } /* If any of the below has changed, then we can't do the update while the pipeline is running. Pipeline must be paused first and decoder -> encoder connection be made quiescent before we @@ -2406,12 +2511,28 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) hdw->active_stream_type = hdw->desired_stream_type; } + if (hdw->hdw_desc->signal_routing_scheme == + PVR2_ROUTING_SCHEME_GOTVIEW) { + u32 b; + /* Handle GOTVIEW audio switching */ + pvr2_hdw_gpio_get_out(hdw,&b); + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + /* Set GPIO 11 */ + pvr2_hdw_gpio_chg_out(hdw,(1 << 11),~0); + } else { + /* Clear GPIO 11 */ + pvr2_hdw_gpio_chg_out(hdw,(1 << 11),0); + } + } + /* Now execute i2c core update */ pvr2_i2c_core_sync(hdw); - if (hdw->state_encoder_run) { - /* If encoder isn't running, then this will get worked out - later when we start the encoder. */ + if ((hdw->pathway_state == PVR2_PATHWAY_ANALOG) && + hdw->state_encoder_run) { + /* If encoder isn't running or it can't be touched, then + this will get worked out later when we start the + encoder. */ if (pvr2_encoder_adjust(hdw) < 0) return !0; } @@ -2454,15 +2575,6 @@ static void pvr2_hdw_worker_poll(struct work_struct *work) } -static void pvr2_hdw_worker_init(struct work_struct *work) -{ - struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workinit); - LOCK_TAKE(hdw->big_lock); do { - pvr2_hdw_setup(hdw); - } while (0); LOCK_GIVE(hdw->big_lock); -} - - static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state) { return wait_event_interruptible( @@ -2472,17 +2584,6 @@ static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state) } -void pvr2_hdw_set_state_callback(struct pvr2_hdw *hdw, - void (*callback_func)(void *), - void *callback_data) -{ - LOCK_TAKE(hdw->big_lock); do { - hdw->state_data = callback_data; - hdw->state_func = callback_func; - } while (0); LOCK_GIVE(hdw->big_lock); -} - - /* Return name for this driver instance */ const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) { @@ -2646,7 +2747,7 @@ void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, u16 address; unsigned int pipe; LOCK_TAKE(hdw->big_lock); do { - if ((hdw->fw_buffer == 0) == !enable_flag) break; + if ((hdw->fw_buffer == NULL) == !enable_flag) break; if (!enable_flag) { pvr2_trace(PVR2_TRACE_FIRMWARE, @@ -2715,7 +2816,7 @@ void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, /* Return true if we're in a mode for retrieval CPU firmware */ int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw) { - return hdw->fw_buffer != 0; + return hdw->fw_buffer != NULL; } @@ -3051,6 +3152,67 @@ int pvr2_send_request(struct pvr2_hdw *hdw, read_data,read_len); } + +static int pvr2_issue_simple_cmd(struct pvr2_hdw *hdw,u32 cmdcode) +{ + int ret; + unsigned int cnt = 1; + unsigned int args = 0; + LOCK_TAKE(hdw->ctl_lock); + hdw->cmd_buffer[0] = cmdcode & 0xffu; + args = (cmdcode >> 8) & 0xffu; + args = (args > 2) ? 2 : args; + if (args) { + cnt += args; + hdw->cmd_buffer[1] = (cmdcode >> 16) & 0xffu; + if (args > 1) { + hdw->cmd_buffer[2] = (cmdcode >> 24) & 0xffu; + } + } + if (pvrusb2_debug & PVR2_TRACE_INIT) { + unsigned int idx; + unsigned int ccnt,bcnt; + char tbuf[50]; + cmdcode &= 0xffu; + bcnt = 0; + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + "Sending FX2 command 0x%x",cmdcode); + bcnt += ccnt; + for (idx = 0; idx < ARRAY_SIZE(pvr2_fx2cmd_desc); idx++) { + if (pvr2_fx2cmd_desc[idx].id == cmdcode) { + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + " \"%s\"", + pvr2_fx2cmd_desc[idx].desc); + bcnt += ccnt; + break; + } + } + if (args) { + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + " (%u",hdw->cmd_buffer[1]); + bcnt += ccnt; + if (args > 1) { + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + ",%u",hdw->cmd_buffer[2]); + bcnt += ccnt; + } + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + ")"); + bcnt += ccnt; + } + pvr2_trace(PVR2_TRACE_INIT,"%.*s",bcnt,tbuf); + } + ret = pvr2_send_request(hdw,hdw->cmd_buffer,cnt,NULL,0); + LOCK_GIVE(hdw->ctl_lock); + return ret; +} + + int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data) { int ret; @@ -3158,25 +3320,19 @@ void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val) int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw) { - int status; - LOCK_TAKE(hdw->ctl_lock); do { - pvr2_trace(PVR2_TRACE_INIT,"Requesting uproc hard reset"); - hdw->cmd_buffer[0] = FX2CMD_DEEP_RESET; - status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); - } while (0); LOCK_GIVE(hdw->ctl_lock); - return status; + return pvr2_issue_simple_cmd(hdw,FX2CMD_DEEP_RESET); } int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw) { - int status; - LOCK_TAKE(hdw->ctl_lock); do { - pvr2_trace(PVR2_TRACE_INIT,"Requesting powerup"); - hdw->cmd_buffer[0] = FX2CMD_POWER_ON; - status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); - } while (0); LOCK_GIVE(hdw->ctl_lock); - return status; + return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_ON); +} + + +int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *hdw) +{ + return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_OFF); } @@ -3201,16 +3357,173 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) } +static int pvr2_hdw_cmd_hcw_demod_reset(struct pvr2_hdw *hdw, int onoff) +{ + hdw->flag_ok = !0; + return pvr2_issue_simple_cmd(hdw, + FX2CMD_HCW_DEMOD_RESETIN | + (1 << 8) | + ((onoff ? 1 : 0) << 16)); +} + + +static int pvr2_hdw_cmd_onair_fe_power_ctrl(struct pvr2_hdw *hdw, int onoff) +{ + hdw->flag_ok = !0; + return pvr2_issue_simple_cmd(hdw,(onoff ? + FX2CMD_ONAIR_DTV_POWER_ON : + FX2CMD_ONAIR_DTV_POWER_OFF)); +} + + +static int pvr2_hdw_cmd_onair_digital_path_ctrl(struct pvr2_hdw *hdw, + int onoff) +{ + return pvr2_issue_simple_cmd(hdw,(onoff ? + FX2CMD_ONAIR_DTV_STREAMING_ON : + FX2CMD_ONAIR_DTV_STREAMING_OFF)); +} + + +static void pvr2_hdw_cmd_modeswitch(struct pvr2_hdw *hdw,int digitalFl) +{ + int cmode; + /* Compare digital/analog desired setting with current setting. If + they don't match, fix it... */ + cmode = (digitalFl ? PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG); + if (cmode == hdw->pathway_state) { + /* They match; nothing to do */ + return; + } + + switch (hdw->hdw_desc->digital_control_scheme) { + case PVR2_DIGITAL_SCHEME_HAUPPAUGE: + pvr2_hdw_cmd_hcw_demod_reset(hdw,digitalFl); + if (cmode == PVR2_PATHWAY_ANALOG) { + /* If moving to analog mode, also force the decoder + to reset. If no decoder is attached, then it's + ok to ignore this because if/when the decoder + attaches, it will reset itself at that time. */ + pvr2_hdw_cmd_decoder_reset(hdw); + } + break; + case PVR2_DIGITAL_SCHEME_ONAIR: + /* Supposedly we should always have the power on whether in + digital or analog mode. But for now do what appears to + work... */ + pvr2_hdw_cmd_onair_fe_power_ctrl(hdw,digitalFl); + break; + default: break; + } + + pvr2_hdw_untrip_unlocked(hdw); + hdw->pathway_state = cmode; +} + + +void pvr2_led_ctrl_hauppauge(struct pvr2_hdw *hdw, int onoff) +{ + /* change some GPIO data + * + * note: bit d7 of dir appears to control the LED, + * so we shut it off here. + * + */ + if (onoff) { + pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000481); + } else { + pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000401); + } + pvr2_hdw_gpio_chg_out(hdw, 0xffffffff, 0x00000000); +} + + +typedef void (*led_method_func)(struct pvr2_hdw *,int); + +static led_method_func led_methods[] = { + [PVR2_LED_SCHEME_HAUPPAUGE] = pvr2_led_ctrl_hauppauge, +}; + + +/* Toggle LED */ +static void pvr2_led_ctrl(struct pvr2_hdw *hdw,int onoff) +{ + unsigned int scheme_id; + led_method_func fp; + + if ((!onoff) == (!hdw->led_on)) return; + + hdw->led_on = onoff != 0; + + scheme_id = hdw->hdw_desc->led_scheme; + if (scheme_id < ARRAY_SIZE(led_methods)) { + fp = led_methods[scheme_id]; + } else { + fp = NULL; + } + + if (fp) (*fp)(hdw,onoff); +} + + /* Stop / start video stream transport */ static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl) { - int status; - LOCK_TAKE(hdw->ctl_lock); do { - hdw->cmd_buffer[0] = - (runFl ? FX2CMD_STREAMING_ON : FX2CMD_STREAMING_OFF); - status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); - } while (0); LOCK_GIVE(hdw->ctl_lock); - return status; + int ret; + + /* If we're in analog mode, then just issue the usual analog + command. */ + if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { + return pvr2_issue_simple_cmd(hdw, + (runFl ? + FX2CMD_STREAMING_ON : + FX2CMD_STREAMING_OFF)); + /*Note: Not reached */ + } + + if (hdw->pathway_state != PVR2_PATHWAY_DIGITAL) { + /* Whoops, we don't know what mode we're in... */ + return -EINVAL; + } + + /* To get here we have to be in digital mode. The mechanism here + is unfortunately different for different vendors. So we switch + on the device's digital scheme attribute in order to figure out + what to do. */ + switch (hdw->hdw_desc->digital_control_scheme) { + case PVR2_DIGITAL_SCHEME_HAUPPAUGE: + return pvr2_issue_simple_cmd(hdw, + (runFl ? + FX2CMD_HCW_DTV_STREAMING_ON : + FX2CMD_HCW_DTV_STREAMING_OFF)); + case PVR2_DIGITAL_SCHEME_ONAIR: + ret = pvr2_issue_simple_cmd(hdw, + (runFl ? + FX2CMD_STREAMING_ON : + FX2CMD_STREAMING_OFF)); + if (ret) return ret; + return pvr2_hdw_cmd_onair_digital_path_ctrl(hdw,runFl); + default: + return -EINVAL; + } +} + + +/* Evaluate whether or not state_pathway_ok can change */ +static int state_eval_pathway_ok(struct pvr2_hdw *hdw) +{ + if (hdw->state_pathway_ok) { + /* Nothing to do if pathway is already ok */ + return 0; + } + if (!hdw->state_pipeline_idle) { + /* Not allowed to change anything if pipeline is not idle */ + return 0; + } + pvr2_hdw_cmd_modeswitch(hdw,hdw->input_val == PVR2_CVAL_INPUT_DTV); + hdw->state_pathway_ok = !0; + trace_stbit("state_pathway_ok",hdw->state_pathway_ok); + return !0; } @@ -3223,6 +3536,12 @@ static int state_eval_encoder_ok(struct pvr2_hdw *hdw) if (hdw->state_encoder_config) return 0; if (hdw->state_decoder_run) return 0; if (hdw->state_usbstream_run) return 0; + if (hdw->pathway_state == PVR2_PATHWAY_DIGITAL) { + if (!hdw->hdw_desc->flag_digital_requires_cx23416) return 0; + } else if (hdw->pathway_state != PVR2_PATHWAY_ANALOG) { + return 0; + } + if (pvr2_upload_firmware2(hdw) < 0) { hdw->flag_tripped = !0; trace_stbit("flag_tripped",hdw->flag_tripped); @@ -3248,7 +3567,9 @@ static int state_eval_encoder_config(struct pvr2_hdw *hdw) /* paranoia - solve race if timer just completed */ del_timer_sync(&hdw->encoder_wait_timer); } else { - if (!hdw->state_encoder_ok || + if (!hdw->state_pathway_ok || + (hdw->pathway_state != PVR2_PATHWAY_ANALOG) || + !hdw->state_encoder_ok || !hdw->state_pipeline_idle || hdw->state_pipeline_pause || !hdw->state_pipeline_req || @@ -3297,20 +3618,116 @@ static int state_eval_encoder_config(struct pvr2_hdw *hdw) } +/* Return true if the encoder should not be running. */ +static int state_check_disable_encoder_run(struct pvr2_hdw *hdw) +{ + if (!hdw->state_encoder_ok) { + /* Encoder isn't healthy at the moment, so stop it. */ + return !0; + } + if (!hdw->state_pathway_ok) { + /* Mode is not understood at the moment (i.e. it wants to + change), so encoder must be stopped. */ + return !0; + } + + switch (hdw->pathway_state) { + case PVR2_PATHWAY_ANALOG: + if (!hdw->state_decoder_run) { + /* We're in analog mode and the decoder is not + running; thus the encoder should be stopped as + well. */ + return !0; + } + break; + case PVR2_PATHWAY_DIGITAL: + if (hdw->state_encoder_runok) { + /* This is a funny case. We're in digital mode so + really the encoder should be stopped. However + if it really is running, only kill it after + runok has been set. This gives a chance for the + onair quirk to function (encoder must run + briefly first, at least once, before onair + digital streaming can work). */ + return !0; + } + break; + default: + /* Unknown mode; so encoder should be stopped. */ + return !0; + } + + /* If we get here, we haven't found a reason to stop the + encoder. */ + return 0; +} + + +/* Return true if the encoder should be running. */ +static int state_check_enable_encoder_run(struct pvr2_hdw *hdw) +{ + if (!hdw->state_encoder_ok) { + /* Don't run the encoder if it isn't healthy... */ + return 0; + } + if (!hdw->state_pathway_ok) { + /* Don't run the encoder if we don't (yet) know what mode + we need to be in... */ + return 0; + } + + switch (hdw->pathway_state) { + case PVR2_PATHWAY_ANALOG: + if (hdw->state_decoder_run) { + /* In analog mode, if the decoder is running, then + run the encoder. */ + return !0; + } + break; + case PVR2_PATHWAY_DIGITAL: + if ((hdw->hdw_desc->digital_control_scheme == + PVR2_DIGITAL_SCHEME_ONAIR) && + !hdw->state_encoder_runok) { + /* This is a quirk. OnAir hardware won't stream + digital until the encoder has been run at least + once, for a minimal period of time (empiricially + measured to be 1/4 second). So if we're on + OnAir hardware and the encoder has never been + run at all, then start the encoder. Normal + state machine logic in the driver will + automatically handle the remaining bits. */ + return !0; + } + break; + default: + /* For completeness (unknown mode; encoder won't run ever) */ + break; + } + /* If we get here, then we haven't found any reason to run the + encoder, so don't run it. */ + return 0; +} + + /* Evaluate whether or not state_encoder_run can change */ static int state_eval_encoder_run(struct pvr2_hdw *hdw) { if (hdw->state_encoder_run) { + if (!state_check_disable_encoder_run(hdw)) return 0; if (hdw->state_encoder_ok) { - if (hdw->state_decoder_run) return 0; + del_timer_sync(&hdw->encoder_run_timer); if (pvr2_encoder_stop(hdw) < 0) return !0; } hdw->state_encoder_run = 0; } else { - if (!hdw->state_encoder_ok) return 0; - if (!hdw->state_decoder_run) return 0; + if (!state_check_enable_encoder_run(hdw)) return 0; if (pvr2_encoder_start(hdw) < 0) return !0; hdw->state_encoder_run = !0; + if (!hdw->state_encoder_runok) { + hdw->encoder_run_timer.expires = + jiffies + (HZ*250/1000); + add_timer(&hdw->encoder_run_timer); + } } trace_stbit("state_encoder_run",hdw->state_encoder_run); return !0; @@ -3339,13 +3756,27 @@ static void pvr2_hdw_encoder_wait_timeout(unsigned long data) } +/* Timeout function for encoder run timer. */ +static void pvr2_hdw_encoder_run_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + if (!hdw->state_encoder_runok) { + hdw->state_encoder_runok = !0; + trace_stbit("state_encoder_runok",hdw->state_encoder_runok); + hdw->state_stale = !0; + queue_work(hdw->workqueue,&hdw->workpoll); + } +} + + /* Evaluate whether or not state_decoder_run can change */ static int state_eval_decoder_run(struct pvr2_hdw *hdw) { if (hdw->state_decoder_run) { if (hdw->state_encoder_ok) { if (hdw->state_pipeline_req && - !hdw->state_pipeline_pause) return 0; + !hdw->state_pipeline_pause && + hdw->state_pathway_ok) return 0; } if (!hdw->flag_decoder_missed) { pvr2_decoder_enable(hdw,0); @@ -3378,7 +3809,9 @@ static int state_eval_decoder_run(struct pvr2_hdw *hdw) hopefully further stabilize the encoder. */ return 0; } - if (!hdw->state_pipeline_req || + if (!hdw->state_pathway_ok || + (hdw->pathway_state != PVR2_PATHWAY_ANALOG) || + !hdw->state_pipeline_req || hdw->state_pipeline_pause || !hdw->state_pipeline_config || !hdw->state_encoder_config || @@ -3399,16 +3832,43 @@ static int state_eval_decoder_run(struct pvr2_hdw *hdw) static int state_eval_usbstream_run(struct pvr2_hdw *hdw) { if (hdw->state_usbstream_run) { - if (hdw->state_encoder_ok) { - if (hdw->state_encoder_run) return 0; + int fl = !0; + if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { + fl = (hdw->state_encoder_ok && + hdw->state_encoder_run); + } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) && + (hdw->hdw_desc->flag_digital_requires_cx23416)) { + fl = hdw->state_encoder_ok; + } + if (fl && + hdw->state_pipeline_req && + !hdw->state_pipeline_pause && + hdw->state_pathway_ok) { + return 0; } pvr2_hdw_cmd_usbstream(hdw,0); hdw->state_usbstream_run = 0; } else { - if (!hdw->state_encoder_ok || - !hdw->state_encoder_run || - !hdw->state_pipeline_req || - hdw->state_pipeline_pause) return 0; + if (!hdw->state_pipeline_req || + hdw->state_pipeline_pause || + !hdw->state_pathway_ok) return 0; + if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { + if (!hdw->state_encoder_ok || + !hdw->state_encoder_run) return 0; + } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) && + (hdw->hdw_desc->flag_digital_requires_cx23416)) { + if (!hdw->state_encoder_ok) return 0; + if (hdw->state_encoder_run) return 0; + if (hdw->hdw_desc->digital_control_scheme == + PVR2_DIGITAL_SCHEME_ONAIR) { + /* OnAir digital receivers won't stream + unless the analog encoder has run first. + Why? I have no idea. But don't even + try until we know the analog side is + known to have run. */ + if (!hdw->state_encoder_runok) return 0; + } + } if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0; hdw->state_usbstream_run = !0; } @@ -3454,7 +3914,8 @@ static int state_update_pipeline_state(struct pvr2_hdw *hdw) typedef int (*state_eval_func)(struct pvr2_hdw *); /* Set of functions to be run to evaluate various states in the driver. */ -const static state_eval_func eval_funcs[] = { +static const state_eval_func eval_funcs[] = { + state_eval_pathway_ok, state_eval_pipeline_config, state_eval_encoder_ok, state_eval_encoder_config, @@ -3502,6 +3963,34 @@ static int pvr2_hdw_state_update(struct pvr2_hdw *hdw) } +static unsigned int print_input_mask(unsigned int msk, + char *buf,unsigned int acnt) +{ + unsigned int idx,ccnt; + unsigned int tcnt = 0; + for (idx = 0; idx < ARRAY_SIZE(control_values_input); idx++) { + if (!((1 << idx) & msk)) continue; + ccnt = scnprintf(buf+tcnt, + acnt-tcnt, + "%s%s", + (tcnt ? ", " : ""), + control_values_input[idx]); + tcnt += ccnt; + } + return tcnt; +} + + +static const char *pvr2_pathway_state_name(int id) +{ + switch (id) { + case PVR2_PATHWAY_ANALOG: return "analog"; + case PVR2_PATHWAY_DIGITAL: return "digital"; + default: return "unknown"; + } +} + + static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, char *buf,unsigned int acnt) { @@ -3509,13 +3998,15 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, case 0: return scnprintf( buf,acnt, - "driver:%s%s%s%s%s", + "driver:%s%s%s%s%s <mode=%s>", (hdw->flag_ok ? " <ok>" : " <fail>"), (hdw->flag_init_ok ? " <init>" : " <uninitialized>"), (hdw->flag_disconnected ? " <disconnected>" : " <connected>"), (hdw->flag_tripped ? " <tripped>" : ""), - (hdw->flag_decoder_missed ? " <no decoder>" : "")); + (hdw->flag_decoder_missed ? " <no decoder>" : ""), + pvr2_pathway_state_name(hdw->pathway_state)); + case 1: return scnprintf( buf,acnt, @@ -3528,7 +4019,7 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, case 2: return scnprintf( buf,acnt, - "worker:%s%s%s%s%s%s", + "worker:%s%s%s%s%s%s%s", (hdw->state_decoder_run ? " <decode:run>" : (hdw->state_decoder_quiescent ? @@ -3538,20 +4029,65 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, (hdw->state_encoder_ok ? "" : " <encode:init>"), (hdw->state_encoder_run ? - " <encode:run>" : " <encode:stop>"), + (hdw->state_encoder_runok ? + " <encode:run>" : + " <encode:firstrun>") : + (hdw->state_encoder_runok ? + " <encode:stop>" : + " <encode:virgin>")), (hdw->state_encoder_config ? " <encode:configok>" : (hdw->state_encoder_waitok ? - "" : " <encode:wait>")), + "" : " <encode:waitok>")), (hdw->state_usbstream_run ? - " <usb:run>" : " <usb:stop>")); - break; + " <usb:run>" : " <usb:stop>"), + (hdw->state_pathway_ok ? + " <pathway:ok>" : "")); case 3: return scnprintf( buf,acnt, "state: %s", pvr2_get_state_name(hdw->master_state)); - break; + case 4: { + unsigned int tcnt = 0; + unsigned int ccnt; + + ccnt = scnprintf(buf, + acnt, + "Hardware supported inputs: "); + tcnt += ccnt; + tcnt += print_input_mask(hdw->input_avail_mask, + buf+tcnt, + acnt-tcnt); + if (hdw->input_avail_mask != hdw->input_allowed_mask) { + ccnt = scnprintf(buf+tcnt, + acnt-tcnt, + "; allowed inputs: "); + tcnt += ccnt; + tcnt += print_input_mask(hdw->input_allowed_mask, + buf+tcnt, + acnt-tcnt); + } + return tcnt; + } + case 5: { + struct pvr2_stream_stats stats; + if (!hdw->vid_stream) break; + pvr2_stream_get_stats(hdw->vid_stream, + &stats, + 0); + return scnprintf( + buf,acnt, + "Bytes streamed=%u" + " URBs: queued=%u idle=%u ready=%u" + " processed=%u failed=%u", + stats.bytes_processed, + stats.buffers_in_queue, + stats.buffers_in_idle, + stats.buffers_in_ready, + stats.buffers_processed, + stats.buffers_failed); + } default: break; } return 0; @@ -3597,6 +4133,7 @@ static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw) unsigned int st; int state_updated = 0; int callback_flag = 0; + int analog_mode; pvr2_trace(PVR2_TRACE_STBITS, "Drive state check START"); @@ -3607,18 +4144,23 @@ static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw) /* Process all state and get back over disposition */ state_updated = pvr2_hdw_state_update(hdw); + analog_mode = (hdw->pathway_state != PVR2_PATHWAY_DIGITAL); + /* Update master state based upon all other states. */ if (!hdw->flag_ok) { st = PVR2_STATE_DEAD; } else if (hdw->fw1_state != FW1_STATE_OK) { st = PVR2_STATE_COLD; - } else if (!hdw->state_encoder_ok) { + } else if ((analog_mode || + hdw->hdw_desc->flag_digital_requires_cx23416) && + !hdw->state_encoder_ok) { st = PVR2_STATE_WARM; - } else if (hdw->flag_tripped || hdw->flag_decoder_missed) { + } else if (hdw->flag_tripped || + (analog_mode && hdw->flag_decoder_missed)) { st = PVR2_STATE_ERROR; - } else if (hdw->state_encoder_run && - hdw->state_decoder_run && - hdw->state_usbstream_run) { + } else if (hdw->state_usbstream_run && + (!analog_mode || + (hdw->state_encoder_run && hdw->state_decoder_run))) { st = PVR2_STATE_RUN; } else { st = PVR2_STATE_READY; @@ -3628,6 +4170,7 @@ static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw) "Device state change from %s to %s", pvr2_get_state_name(hdw->master_state), pvr2_get_state_name(st)); + pvr2_led_ctrl(hdw,st == PVR2_STATE_RUN); hdw->master_state = st; state_updated = !0; callback_flag = !0; @@ -3657,47 +4200,6 @@ static void pvr2_hdw_state_sched(struct pvr2_hdw *hdw) } -void pvr2_hdw_get_debug_info_unlocked(const struct pvr2_hdw *hdw, - struct pvr2_hdw_debug_info *ptr) -{ - ptr->big_lock_held = hdw->big_lock_held; - ptr->ctl_lock_held = hdw->ctl_lock_held; - ptr->flag_disconnected = hdw->flag_disconnected; - ptr->flag_init_ok = hdw->flag_init_ok; - ptr->flag_ok = hdw->flag_ok; - ptr->fw1_state = hdw->fw1_state; - ptr->flag_decoder_missed = hdw->flag_decoder_missed; - ptr->flag_tripped = hdw->flag_tripped; - ptr->state_encoder_ok = hdw->state_encoder_ok; - ptr->state_encoder_run = hdw->state_encoder_run; - ptr->state_decoder_run = hdw->state_decoder_run; - ptr->state_usbstream_run = hdw->state_usbstream_run; - ptr->state_decoder_quiescent = hdw->state_decoder_quiescent; - ptr->state_pipeline_config = hdw->state_pipeline_config; - ptr->state_pipeline_req = hdw->state_pipeline_req; - ptr->state_pipeline_pause = hdw->state_pipeline_pause; - ptr->state_pipeline_idle = hdw->state_pipeline_idle; - ptr->cmd_debug_state = hdw->cmd_debug_state; - ptr->cmd_code = hdw->cmd_debug_code; - ptr->cmd_debug_write_len = hdw->cmd_debug_write_len; - ptr->cmd_debug_read_len = hdw->cmd_debug_read_len; - ptr->cmd_debug_timeout = hdw->ctl_timeout_flag; - ptr->cmd_debug_write_pend = hdw->ctl_write_pend_flag; - ptr->cmd_debug_read_pend = hdw->ctl_read_pend_flag; - ptr->cmd_debug_rstatus = hdw->ctl_read_urb->status; - ptr->cmd_debug_wstatus = hdw->ctl_read_urb->status; -} - - -void pvr2_hdw_get_debug_info_locked(struct pvr2_hdw *hdw, - struct pvr2_hdw_debug_info *ptr) -{ - LOCK_TAKE(hdw->ctl_lock); do { - pvr2_hdw_get_debug_info_unlocked(hdw,ptr); - } while(0); LOCK_GIVE(hdw->ctl_lock); -} - - int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp) { return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp); @@ -3757,6 +4259,80 @@ int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val) } +unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *hdw) +{ + return hdw->input_avail_mask; +} + + +unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *hdw) +{ + return hdw->input_allowed_mask; +} + + +static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v) +{ + if (hdw->input_val != v) { + hdw->input_val = v; + hdw->input_dirty = !0; + } + + /* Handle side effects - if we switch to a mode that needs the RF + tuner, then select the right frequency choice as well and mark + it dirty. */ + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + hdw->freqSelector = 0; + hdw->freqDirty = !0; + } else if ((hdw->input_val == PVR2_CVAL_INPUT_TV) || + (hdw->input_val == PVR2_CVAL_INPUT_DTV)) { + hdw->freqSelector = 1; + hdw->freqDirty = !0; + } + return 0; +} + + +int pvr2_hdw_set_input_allowed(struct pvr2_hdw *hdw, + unsigned int change_mask, + unsigned int change_val) +{ + int ret = 0; + unsigned int nv,m,idx; + LOCK_TAKE(hdw->big_lock); + do { + nv = hdw->input_allowed_mask & ~change_mask; + nv |= (change_val & change_mask); + nv &= hdw->input_avail_mask; + if (!nv) { + /* No legal modes left; return error instead. */ + ret = -EPERM; + break; + } + hdw->input_allowed_mask = nv; + if ((1 << hdw->input_val) & hdw->input_allowed_mask) { + /* Current mode is still in the allowed mask, so + we're done. */ + break; + } + /* Select and switch to a mode that is still in the allowed + mask */ + if (!hdw->input_allowed_mask) { + /* Nothing legal; give up */ + break; + } + m = hdw->input_allowed_mask; + for (idx = 0; idx < (sizeof(m) << 3); idx++) { + if (!((1 << idx) & m)) continue; + pvr2_hdw_set_input(hdw,idx); + break; + } + } while (0); + LOCK_GIVE(hdw->big_lock); + return ret; +} + + /* Find I2C address of eeprom */ static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index 3ad7a13d6c3..20295e0c199 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -40,9 +40,10 @@ /* Legal values for the INPUT state variable */ #define PVR2_CVAL_INPUT_TV 0 -#define PVR2_CVAL_INPUT_SVIDEO 1 +#define PVR2_CVAL_INPUT_DTV 1 #define PVR2_CVAL_INPUT_COMPOSITE 2 -#define PVR2_CVAL_INPUT_RADIO 3 +#define PVR2_CVAL_INPUT_SVIDEO 3 +#define PVR2_CVAL_INPUT_RADIO 4 enum pvr2_config { pvr2_config_empty, /* No configuration */ @@ -90,9 +91,6 @@ enum pvr2_v4l_type { /* Translate configuration enum to a string label */ const char *pvr2_config_get_name(enum pvr2_config); -/* Translate a master state enum to a string label */ -const char *pvr2_hdw_get_state_name(unsigned int); - struct pvr2_hdw; /* Create and return a structure for interacting with the underlying @@ -100,14 +98,15 @@ struct pvr2_hdw; struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, const struct usb_device_id *devid); +/* Perform second stage initialization, passing in a notification callback + for when the master state changes. */ +int pvr2_hdw_initialize(struct pvr2_hdw *, + void (*callback_func)(void *), + void *callback_data); + /* Destroy hardware interaction structure */ void pvr2_hdw_destroy(struct pvr2_hdw *); -/* Register a function to be called whenever the master state changes. */ -void pvr2_hdw_set_state_callback(struct pvr2_hdw *, - void (*callback_func)(void *), - void *callback_data); - /* Return true if in the ready (normal) state */ int pvr2_hdw_dev_ok(struct pvr2_hdw *); @@ -146,6 +145,23 @@ struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *, /* Commit all control changes made up to this point */ int pvr2_hdw_commit_ctl(struct pvr2_hdw *); +/* Return a bit mask of valid input selections for this device. Mask bits + * will be according to PVR_CVAL_INPUT_xxxx definitions. */ +unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *); + +/* Return a bit mask of allowed input selections for this device. Mask bits + * will be according to PVR_CVAL_INPUT_xxxx definitions. */ +unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *); + +/* Change the set of allowed input selections for this device. Both + change_mask and change_valu are mask bits according to + PVR_CVAL_INPUT_xxxx definitions. The change_mask parameter indicate + which settings are being changed and the change_val parameter indicates + whether corresponding settings are being set or cleared. */ +int pvr2_hdw_set_input_allowed(struct pvr2_hdw *, + unsigned int change_mask, + unsigned int change_val); + /* Return name for this driver instance */ const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *); @@ -250,6 +266,9 @@ int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *); /* Execute simple reset command */ int pvr2_hdw_cmd_powerup(struct pvr2_hdw *); +/* suspend */ +int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *); + /* Order decoder to reset */ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 62867fa3517..793c89a8d67 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -35,7 +35,7 @@ */ -static unsigned int i2c_scan = 0; +static unsigned int i2c_scan; module_param(i2c_scan, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c index ce3c8982ffe..7aff8b72006 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.c +++ b/drivers/media/video/pvrusb2/pvrusb2-io.c @@ -80,6 +80,10 @@ struct pvr2_stream { /* Tracking state for tolerating errors */ unsigned int fail_count; unsigned int fail_tolerance; + + unsigned int buffers_processed; + unsigned int buffers_failed; + unsigned int bytes_processed; }; struct pvr2_buffer { @@ -446,6 +450,8 @@ static void buffer_complete(struct urb *urb) (urb->status == -ENOENT) || (urb->status == -ECONNRESET) || (urb->status == -ESHUTDOWN)) { + (sp->buffers_processed)++; + sp->bytes_processed += urb->actual_length; bp->used_count = urb->actual_length; if (sp->fail_count) { pvr2_trace(PVR2_TRACE_TOLERANCE, @@ -457,11 +463,13 @@ static void buffer_complete(struct urb *urb) // We can tolerate this error, because we're below the // threshold... (sp->fail_count)++; + (sp->buffers_failed)++; pvr2_trace(PVR2_TRACE_TOLERANCE, "stream %p ignoring error %d" " - fail count increased to %u", sp,urb->status,sp->fail_count); } else { + (sp->buffers_failed)++; bp->status = urb->status; } spin_unlock_irqrestore(&sp->list_lock,irq_flags); @@ -515,6 +523,28 @@ void pvr2_stream_set_callback(struct pvr2_stream *sp, } while(0); mutex_unlock(&sp->mutex); } +void pvr2_stream_get_stats(struct pvr2_stream *sp, + struct pvr2_stream_stats *stats, + int zero_counts) +{ + unsigned long irq_flags; + spin_lock_irqsave(&sp->list_lock,irq_flags); + if (stats) { + stats->buffers_in_queue = sp->q_count; + stats->buffers_in_idle = sp->i_count; + stats->buffers_in_ready = sp->r_count; + stats->buffers_processed = sp->buffers_processed; + stats->buffers_failed = sp->buffers_failed; + stats->bytes_processed = sp->bytes_processed; + } + if (zero_counts) { + sp->buffers_processed = 0; + sp->buffers_failed = 0; + sp->bytes_processed = 0; + } + spin_unlock_irqrestore(&sp->list_lock,irq_flags); +} + /* Query / set the nominal buffer count */ int pvr2_stream_get_buffer_count(struct pvr2_stream *sp) { @@ -563,7 +593,7 @@ void pvr2_stream_kill(struct pvr2_stream *sp) struct pvr2_buffer *bp; mutex_lock(&sp->mutex); do { pvr2_stream_internal_flush(sp); - while ((bp = pvr2_stream_get_ready_buffer(sp)) != 0) { + while ((bp = pvr2_stream_get_ready_buffer(sp)) != NULL) { pvr2_buffer_set_idle(bp); } if (sp->buffer_total_count != sp->buffer_target_count) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.h b/drivers/media/video/pvrusb2/pvrusb2-io.h index 93279cc2a35..42fcf8281a8 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.h +++ b/drivers/media/video/pvrusb2/pvrusb2-io.h @@ -36,6 +36,15 @@ enum pvr2_buffer_state { struct pvr2_stream; struct pvr2_buffer; +struct pvr2_stream_stats { + unsigned int buffers_in_queue; + unsigned int buffers_in_idle; + unsigned int buffers_in_ready; + unsigned int buffers_processed; + unsigned int buffers_failed; + unsigned int bytes_processed; +}; + /* Initialize / tear down stream structure */ struct pvr2_stream *pvr2_stream_create(void); void pvr2_stream_destroy(struct pvr2_stream *); @@ -45,6 +54,9 @@ void pvr2_stream_setup(struct pvr2_stream *, void pvr2_stream_set_callback(struct pvr2_stream *, pvr2_stream_callback func, void *data); +void pvr2_stream_get_stats(struct pvr2_stream *, + struct pvr2_stream_stats *, + int zero_counts); /* Query / set the nominal buffer count */ int pvr2_stream_get_buffer_count(struct pvr2_stream *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c index f782418afa4..c572212c9f1 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c @@ -165,7 +165,7 @@ static int pvr2_ioread_start(struct pvr2_ioread *cp) if (!(cp->stream)) return 0; pvr2_trace(PVR2_TRACE_START_STOP, "/*---TRACE_READ---*/ pvr2_ioread_start id=%p",cp); - while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != 0) { + while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != NULL) { stat = pvr2_buffer_queue(bp); if (stat < 0) { pvr2_trace(PVR2_TRACE_DATA_FLOW, diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c index b63b2265503..332aced8a5a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-main.c +++ b/drivers/media/video/pvrusb2/pvrusb2-main.c @@ -60,6 +60,10 @@ static void pvr_setup_attach(struct pvr2_context *pvr) { /* Create association with v4l layer */ pvr2_v4l2_create(pvr); +#ifdef CONFIG_VIDEO_PVRUSB2_DVB + /* Create association with dvb layer */ + pvr2_dvb_create(pvr); +#endif #ifdef CONFIG_VIDEO_PVRUSB2_SYSFS pvr2_sysfs_create(pvr,class_ptr); #endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */ @@ -121,6 +125,12 @@ static int __init pvr_init(void) pvr2_trace(PVR2_TRACE_INIT,"pvr_init"); + ret = pvr2_context_global_init(); + if (ret != 0) { + pvr2_trace(PVR2_TRACE_INIT,"pvr_init failure code=%d",ret); + return ret; + } + #ifdef CONFIG_VIDEO_PVRUSB2_SYSFS class_ptr = pvr2_sysfs_class_create(); #endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */ @@ -132,6 +142,8 @@ static int __init pvr_init(void) if (pvrusb2_debug) info("Debug mask is %d (0x%x)", pvrusb2_debug,pvrusb2_debug); + pvr2_trace(PVR2_TRACE_INIT,"pvr_init complete"); + return ret; } @@ -144,6 +156,10 @@ static void __exit pvr_exit(void) #ifdef CONFIG_VIDEO_PVRUSB2_SYSFS pvr2_sysfs_class_destroy(class_ptr); #endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */ + + pvr2_context_global_done(); + + pvr2_trace(PVR2_TRACE_INIT,"pvr_exit complete"); } module_init(pvr_init); diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.c b/drivers/media/video/pvrusb2/pvrusb2-std.c index da309288daa..fdc5a2b49ca 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-std.c +++ b/drivers/media/video/pvrusb2/pvrusb2-std.c @@ -79,7 +79,7 @@ struct std_name { #define TSTD_Nc (V4L2_STD_PAL_Nc) #define TSTD_60 (V4L2_STD_PAL_60) -#define CSTD_ALL (CSTD_PAL|CSTD_NTSC|CSTD_SECAM) +#define CSTD_ALL (CSTD_PAL|CSTD_NTSC|CSTD_ATSC|CSTD_SECAM) /* Mapping of standard bits to color system */ static const struct std_name std_groups[] = { @@ -328,7 +328,7 @@ struct v4l2_standard *pvr2_std_create_enum(unsigned int *countptr, struct v4l2_standard *stddefs; if (pvrusb2_debug & PVR2_TRACE_STD) { - char buf[50]; + char buf[100]; bcnt = pvr2_std_id_to_str(buf,sizeof(buf),id); pvr2_trace( PVR2_TRACE_STD,"Mapping standards mask=0x%x (%.*s)", @@ -352,8 +352,11 @@ struct v4l2_standard *pvr2_std_create_enum(unsigned int *countptr, if ((id & std_mixes[idx2]) == std_mixes[idx2]) std_cnt++; } + /* Don't complain about ATSC standard values */ + fmsk &= ~CSTD_ATSC; + if (fmsk) { - char buf[50]; + char buf[100]; bcnt = pvr2_std_id_to_str(buf,sizeof(buf),fmsk); pvr2_trace( PVR2_TRACE_ERROR_LEGS, diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 7a1cd878e31..0ff7a836a8a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -21,7 +21,6 @@ #include <linux/string.h> #include <linux/slab.h> -#include <asm/semaphore.h> #include "pvrusb2-sysfs.h" #include "pvrusb2-hdw.h" #include "pvrusb2-debug.h" @@ -288,6 +287,8 @@ static ssize_t store_val_norm(int id,struct device *class_dev, struct pvr2_sysfs *sfp; int ret; sfp = (struct pvr2_sysfs *)class_dev->driver_data; + pvr2_sysfs_trace("pvr2_sysfs(%p) store_val_norm(cid=%d) \"%.*s\"", + sfp,id,(int)count,buf); ret = store_val_any(id,0,sfp,buf,count); if (!ret) ret = count; return ret; @@ -299,6 +300,8 @@ static ssize_t store_val_custom(int id,struct device *class_dev, struct pvr2_sysfs *sfp; int ret; sfp = (struct pvr2_sysfs *)class_dev->driver_data; + pvr2_sysfs_trace("pvr2_sysfs(%p) store_val_custom(cid=%d) \"%.*s\"", + sfp,id,(int)count,buf); ret = store_val_any(id,1,sfp,buf,count); if (!ret) ret = count; return ret; @@ -605,8 +608,9 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) ret = sysfs_create_group(&sfp->class_dev->kobj,&cip->grp); if (ret) { - printk(KERN_WARNING "%s: sysfs_create_group error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "sysfs_create_group error: %d", + ret); return; } cip->created_ok = !0; @@ -637,15 +641,17 @@ static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp) sfp->debugifc = dip; ret = device_create_file(sfp->class_dev,&dip->attr_debugcmd); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { dip->debugcmd_created_ok = !0; } ret = device_create_file(sfp->class_dev,&dip->attr_debuginfo); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { dip->debuginfo_created_ok = !0; } @@ -848,8 +854,8 @@ static void class_dev_create(struct pvr2_sysfs *sfp, class_dev->driver_data = sfp; ret = device_register(class_dev); if (ret) { - printk(KERN_ERR "%s: device_register failed\n", - __FUNCTION__); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_register failed"); kfree(class_dev); return; } @@ -861,8 +867,9 @@ static void class_dev_create(struct pvr2_sysfs *sfp, ret = device_create_file(sfp->class_dev, &sfp->attr_v4l_minor_number); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { sfp->v4l_minor_number_created_ok = !0; } @@ -874,8 +881,9 @@ static void class_dev_create(struct pvr2_sysfs *sfp, ret = device_create_file(sfp->class_dev, &sfp->attr_v4l_radio_minor_number); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { sfp->v4l_radio_minor_number_created_ok = !0; } @@ -886,8 +894,9 @@ static void class_dev_create(struct pvr2_sysfs *sfp, sfp->attr_unit_number.store = NULL; ret = device_create_file(sfp->class_dev,&sfp->attr_unit_number); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { sfp->unit_number_created_ok = !0; } @@ -899,8 +908,9 @@ static void class_dev_create(struct pvr2_sysfs *sfp, ret = device_create_file(sfp->class_dev, &sfp->attr_bus_info); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { sfp->bus_info_created_ok = !0; } @@ -912,8 +922,9 @@ static void class_dev_create(struct pvr2_sysfs *sfp, ret = device_create_file(sfp->class_dev, &sfp->attr_hdw_name); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { sfp->hdw_name_created_ok = !0; } @@ -925,8 +936,9 @@ static void class_dev_create(struct pvr2_sysfs *sfp, ret = device_create_file(sfp->class_dev, &sfp->attr_hdw_desc); if (ret < 0) { - printk(KERN_WARNING "%s: device_create_file error: %d\n", - __FUNCTION__, ret); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "device_create_file error: %d", + ret); } else { sfp->hdw_desc_created_ok = !0; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 8f0587ebd4b..e9b5d4e9132 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -57,7 +57,9 @@ struct pvr2_v4l2_fh { struct pvr2_v4l2_fh *vprev; wait_queue_head_t wait_data; int fw_mode_flag; - int prev_input_val; + /* Map contiguous ordinal value to input id */ + unsigned char *input_map; + unsigned int input_cnt; }; struct pvr2_v4l2 { @@ -259,14 +261,21 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, struct v4l2_input *vi = (struct v4l2_input *)arg; struct v4l2_input tmp; unsigned int cnt; + int val; cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT); memset(&tmp,0,sizeof(tmp)); tmp.index = vi->index; ret = 0; - switch (vi->index) { + if ((vi->index < 0) || (vi->index >= fh->input_cnt)) { + ret = -EINVAL; + break; + } + val = fh->input_map[vi->index]; + switch (val) { case PVR2_CVAL_INPUT_TV: + case PVR2_CVAL_INPUT_DTV: case PVR2_CVAL_INPUT_RADIO: tmp.type = V4L2_INPUT_TYPE_TUNER; break; @@ -281,7 +290,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, if (ret < 0) break; cnt = 0; - pvr2_ctrl_get_valname(cptr,vi->index, + pvr2_ctrl_get_valname(cptr,val, tmp.name,sizeof(tmp.name)-1,&cnt); tmp.name[cnt] = 0; @@ -303,22 +312,33 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_G_INPUT: { + unsigned int idx; struct pvr2_ctrl *cptr; struct v4l2_input *vi = (struct v4l2_input *)arg; int val; cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT); val = 0; ret = pvr2_ctrl_get_value(cptr,&val); - vi->index = val; + vi->index = 0; + for (idx = 0; idx < fh->input_cnt; idx++) { + if (fh->input_map[idx] == val) { + vi->index = idx; + break; + } + } break; } case VIDIOC_S_INPUT: { struct v4l2_input *vi = (struct v4l2_input *)arg; + if ((vi->index < 0) || (vi->index >= fh->input_cnt)) { + ret = -ERANGE; + break; + } ret = pvr2_ctrl_set_value( pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT), - vi->index); + fh->input_map[vi->index]); break; } @@ -858,7 +878,6 @@ static int pvr2_v4l2_release(struct inode *inode, struct file *file) { struct pvr2_v4l2_fh *fhp = file->private_data; struct pvr2_v4l2 *vp = fhp->vhead; - struct pvr2_context *mp = fhp->vhead->channel.mc_head; struct pvr2_hdw *hdw = fhp->channel.mc_head->hdw; pvr2_trace(PVR2_TRACE_OPEN_CLOSE,"pvr2_v4l2_release"); @@ -875,42 +894,30 @@ static int pvr2_v4l2_release(struct inode *inode, struct file *file) v4l2_prio_close(&vp->prio, &fhp->prio); file->private_data = NULL; - pvr2_context_enter(mp); do { - /* Restore the previous input selection, if it makes sense - to do so. */ - if (fhp->dev_info->v4l_type == VFL_TYPE_RADIO) { - struct pvr2_ctrl *cp; - int pval; - cp = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT); - pvr2_ctrl_get_value(cp,&pval); - /* Only restore if we're still selecting the radio */ - if (pval == PVR2_CVAL_INPUT_RADIO) { - pvr2_ctrl_set_value(cp,fhp->prev_input_val); - pvr2_hdw_commit_ctl(hdw); - } - } - - if (fhp->vnext) { - fhp->vnext->vprev = fhp->vprev; - } else { - vp->vlast = fhp->vprev; - } - if (fhp->vprev) { - fhp->vprev->vnext = fhp->vnext; - } else { - vp->vfirst = fhp->vnext; - } - fhp->vnext = NULL; - fhp->vprev = NULL; - fhp->vhead = NULL; - pvr2_channel_done(&fhp->channel); - pvr2_trace(PVR2_TRACE_STRUCT, - "Destroying pvr_v4l2_fh id=%p",fhp); - kfree(fhp); - if (vp->channel.mc_head->disconnect_flag && !vp->vfirst) { - pvr2_v4l2_destroy_no_lock(vp); - } - } while (0); pvr2_context_exit(mp); + if (fhp->vnext) { + fhp->vnext->vprev = fhp->vprev; + } else { + vp->vlast = fhp->vprev; + } + if (fhp->vprev) { + fhp->vprev->vnext = fhp->vnext; + } else { + vp->vfirst = fhp->vnext; + } + fhp->vnext = NULL; + fhp->vprev = NULL; + fhp->vhead = NULL; + pvr2_channel_done(&fhp->channel); + pvr2_trace(PVR2_TRACE_STRUCT, + "Destroying pvr_v4l2_fh id=%p",fhp); + if (fhp->input_map) { + kfree(fhp->input_map); + fhp->input_map = NULL; + } + kfree(fhp); + if (vp->channel.mc_head->disconnect_flag && !vp->vfirst) { + pvr2_v4l2_destroy_no_lock(vp); + } return 0; } @@ -921,6 +928,9 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) struct pvr2_v4l2_fh *fhp; struct pvr2_v4l2 *vp; struct pvr2_hdw *hdw; + unsigned int input_mask = 0; + unsigned int input_cnt,idx; + int ret = 0; dip = container_of(video_devdata(file),struct pvr2_v4l2_dev,devbase); @@ -943,32 +953,62 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) init_waitqueue_head(&fhp->wait_data); fhp->dev_info = dip; - pvr2_context_enter(vp->channel.mc_head); do { - pvr2_trace(PVR2_TRACE_STRUCT,"Creating pvr_v4l2_fh id=%p",fhp); - pvr2_channel_init(&fhp->channel,vp->channel.mc_head); + pvr2_trace(PVR2_TRACE_STRUCT,"Creating pvr_v4l2_fh id=%p",fhp); + pvr2_channel_init(&fhp->channel,vp->channel.mc_head); - fhp->vnext = NULL; - fhp->vprev = vp->vlast; - if (vp->vlast) { - vp->vlast->vnext = fhp; - } else { - vp->vfirst = fhp; - } - vp->vlast = fhp; - fhp->vhead = vp; - - /* Opening the /dev/radioX device implies a mode switch. - So execute that here. Note that you can get the - IDENTICAL effect merely by opening the normal video - device and setting the input appropriately. */ - if (dip->v4l_type == VFL_TYPE_RADIO) { - struct pvr2_ctrl *cp; - cp = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT); - pvr2_ctrl_get_value(cp,&fhp->prev_input_val); - pvr2_ctrl_set_value(cp,PVR2_CVAL_INPUT_RADIO); - pvr2_hdw_commit_ctl(hdw); - } - } while (0); pvr2_context_exit(vp->channel.mc_head); + if (dip->v4l_type == VFL_TYPE_RADIO) { + /* Opening device as a radio, legal input selection subset + is just the radio. */ + input_mask = (1 << PVR2_CVAL_INPUT_RADIO); + } else { + /* Opening the main V4L device, legal input selection + subset includes all analog inputs. */ + input_mask = ((1 << PVR2_CVAL_INPUT_RADIO) | + (1 << PVR2_CVAL_INPUT_TV) | + (1 << PVR2_CVAL_INPUT_COMPOSITE) | + (1 << PVR2_CVAL_INPUT_SVIDEO)); + } + ret = pvr2_channel_limit_inputs(&fhp->channel,input_mask); + if (ret) { + pvr2_channel_done(&fhp->channel); + pvr2_trace(PVR2_TRACE_STRUCT, + "Destroying pvr_v4l2_fh id=%p (input mask error)", + fhp); + + kfree(fhp); + return ret; + } + + input_mask &= pvr2_hdw_get_input_available(hdw); + input_cnt = 0; + for (idx = 0; idx < (sizeof(input_mask) << 3); idx++) { + if (input_mask & (1 << idx)) input_cnt++; + } + fhp->input_cnt = input_cnt; + fhp->input_map = kzalloc(input_cnt,GFP_KERNEL); + if (!fhp->input_map) { + pvr2_channel_done(&fhp->channel); + pvr2_trace(PVR2_TRACE_STRUCT, + "Destroying pvr_v4l2_fh id=%p (input map failure)", + fhp); + kfree(fhp); + return -ENOMEM; + } + input_cnt = 0; + for (idx = 0; idx < (sizeof(input_mask) << 3); idx++) { + if (!(input_mask & (1 << idx))) continue; + fhp->input_map[input_cnt++] = idx; + } + + fhp->vnext = NULL; + fhp->vprev = vp->vlast; + if (vp->vlast) { + vp->vlast->vnext = fhp; + } else { + vp->vfirst = fhp; + } + vp->vlast = fhp; + fhp->vhead = vp; fhp->file = file; file->private_data = fhp; @@ -1201,24 +1241,27 @@ struct pvr2_v4l2 *pvr2_v4l2_create(struct pvr2_context *mnp) vp = kzalloc(sizeof(*vp),GFP_KERNEL); if (!vp) return vp; - vp->dev_video = kzalloc(sizeof(*vp->dev_video),GFP_KERNEL); - vp->dev_radio = kzalloc(sizeof(*vp->dev_radio),GFP_KERNEL); - if (!(vp->dev_video && vp->dev_radio)) { - kfree(vp->dev_video); - kfree(vp->dev_radio); - kfree(vp); - return NULL; - } pvr2_channel_init(&vp->channel,mnp); pvr2_trace(PVR2_TRACE_STRUCT,"Creating pvr2_v4l2 id=%p",vp); vp->channel.check_func = pvr2_v4l2_internal_check; /* register streams */ + vp->dev_video = kzalloc(sizeof(*vp->dev_video),GFP_KERNEL); + if (!vp->dev_video) goto fail; pvr2_v4l2_dev_init(vp->dev_video,vp,VFL_TYPE_GRABBER); - pvr2_v4l2_dev_init(vp->dev_radio,vp,VFL_TYPE_RADIO); + if (pvr2_hdw_get_input_available(vp->channel.mc_head->hdw) & + (1 << PVR2_CVAL_INPUT_RADIO)) { + vp->dev_radio = kzalloc(sizeof(*vp->dev_radio),GFP_KERNEL); + if (!vp->dev_radio) goto fail; + pvr2_v4l2_dev_init(vp->dev_radio,vp,VFL_TYPE_RADIO); + } return vp; + fail: + pvr2_trace(PVR2_TRACE_STRUCT,"Failure creating pvr2_v4l2 id=%p",vp); + pvr2_v4l2_destroy_no_lock(vp); + return NULL; } /* diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index 7c47345501b..2433a316004 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -81,7 +81,7 @@ static void set_input(struct pvr2_v4l_decoder *ctxt) pvr2_trace(PVR2_TRACE_CHIPS,"i2c v4l2 set_input(%d)",hdw->input_val); if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != 0) && + ((sp = routing_schemes + sid) != NULL) && (hdw->input_val >= 0) && (hdw->input_val < sp->cnt)) { route.input = sp->def[hdw->input_val]; diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index f991d72fe10..423fa7c2d0c 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -130,8 +130,8 @@ static int default_fbufs = 3; /* Default number of frame buffers */ #ifdef CONFIG_USB_PWC_DEBUG int pwc_trace = PWC_DEBUG_LEVEL; #endif -static int power_save = 0; -static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */ +static int power_save; +static int led_on = 100, led_off; /* defaults to LED that is on while in use */ static int pwc_preferred_compression = 1; /* 0..3 = uncompressed..high */ static struct { int type; @@ -159,7 +159,9 @@ static const struct file_operations pwc_fops = { .poll = pwc_video_poll, .mmap = pwc_video_mmap, .ioctl = pwc_video_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; static struct video_device pwc_template = { @@ -487,7 +489,7 @@ static void pwc_reset_buffers(struct pwc_device *pdev) int i; unsigned long flags; - PWC_DEBUG_MEMORY(">> %s __enter__\n", __FUNCTION__); + PWC_DEBUG_MEMORY(">> %s __enter__\n", __func__); spin_lock_irqsave(&pdev->ptrlock, flags); pdev->full_frames = NULL; @@ -509,7 +511,7 @@ static void pwc_reset_buffers(struct pwc_device *pdev) pdev->fill_image = 0; spin_unlock_irqrestore(&pdev->ptrlock, flags); - PWC_DEBUG_MEMORY("<< %s __leaving__\n", __FUNCTION__); + PWC_DEBUG_MEMORY("<< %s __leaving__\n", __func__); } @@ -786,8 +788,8 @@ static void pwc_isoc_handler(struct urb *urb) } /* ..status == 0 */ else { /* This is normally not interesting to the user, unless - * you are really debugging something */ - static int iso_error = 0; + * you are really debugging something, default = 0 */ + static int iso_error; iso_error++; if (iso_error < 20) PWC_DEBUG_FLOW("Iso frame %d of USB has error %d\n", i, fst); @@ -915,7 +917,7 @@ static void pwc_iso_stop(struct pwc_device *pdev) struct urb *urb; urb = pdev->sbuf[i].urb; - if (urb != 0) { + if (urb) { PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb); usb_kill_urb(urb); } @@ -931,7 +933,7 @@ static void pwc_iso_free(struct pwc_device *pdev) struct urb *urb; urb = pdev->sbuf[i].urb; - if (urb != 0) { + if (urb) { PWC_DEBUG_MEMORY("Freeing URB\n"); usb_free_urb(urb); pdev->sbuf[i].urb = NULL; @@ -1426,7 +1428,7 @@ static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) unsigned long page, pos = 0; int index; - PWC_DEBUG_MEMORY(">> %s\n", __FUNCTION__); + PWC_DEBUG_MEMORY(">> %s\n", __func__); pdev = vdev->priv; size = vma->vm_end - vma->vm_start; start = vma->vm_start; @@ -1759,8 +1761,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id /* Allocate video_device structure */ pdev->vdev = video_device_alloc(); - if (pdev->vdev == 0) - { + if (!pdev->vdev) { PWC_ERROR("Err, cannot allocate video_device struture. Failing probe."); kfree(pdev); return -ENOMEM; diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index 32fbe1ae625..1742889874d 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -351,8 +351,10 @@ int pwc_video_do_ioctl(struct inode *inode, struct file *file, return -EFAULT; #ifdef CONFIG_USB_PWC_DEBUG - if (PWC_DEBUG_LEVEL_IOCTL & pwc_trace) + if (PWC_DEBUG_LEVEL_IOCTL & pwc_trace) { v4l_printk_ioctl(cmd); + printk("\n"); + } #endif diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c new file mode 100644 index 00000000000..5ec5bb9a94d --- /dev/null +++ b/drivers/media/video/pxa_camera.c @@ -0,0 +1,1206 @@ +/* + * V4L2 Driver for PXA camera host + * + * Copyright (C) 2006, Sascha Hauer, Pengutronix + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/moduleparam.h> +#include <linux/time.h> +#include <linux/version.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/clk.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/soc_camera.h> + +#include <linux/videodev2.h> + +#include <asm/dma.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/camera.h> + +#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) +#define PXA_CAM_DRV_NAME "pxa27x-camera" + +#define CICR0_SIM_MP (0 << 24) +#define CICR0_SIM_SP (1 << 24) +#define CICR0_SIM_MS (2 << 24) +#define CICR0_SIM_EP (3 << 24) +#define CICR0_SIM_ES (4 << 24) + +#define CICR1_DW_VAL(x) ((x) & CICR1_DW) /* Data bus width */ +#define CICR1_PPL_VAL(x) (((x) << 15) & CICR1_PPL) /* Pixels per line */ +#define CICR1_COLOR_SP_VAL(x) (((x) << 3) & CICR1_COLOR_SP) /* color space */ +#define CICR1_RGB_BPP_VAL(x) (((x) << 7) & CICR1_RGB_BPP) /* bpp for rgb */ +#define CICR1_RGBT_CONV_VAL(x) (((x) << 29) & CICR1_RGBT_CONV) /* rgbt conv */ + +#define CICR2_BLW_VAL(x) (((x) << 24) & CICR2_BLW) /* Beginning-of-line pixel clock wait count */ +#define CICR2_ELW_VAL(x) (((x) << 16) & CICR2_ELW) /* End-of-line pixel clock wait count */ +#define CICR2_HSW_VAL(x) (((x) << 10) & CICR2_HSW) /* Horizontal sync pulse width */ +#define CICR2_BFPW_VAL(x) (((x) << 3) & CICR2_BFPW) /* Beginning-of-frame pixel clock wait count */ +#define CICR2_FSW_VAL(x) (((x) << 0) & CICR2_FSW) /* Frame stabilization wait count */ + +#define CICR3_BFW_VAL(x) (((x) << 24) & CICR3_BFW) /* Beginning-of-frame line clock wait count */ +#define CICR3_EFW_VAL(x) (((x) << 16) & CICR3_EFW) /* End-of-frame line clock wait count */ +#define CICR3_VSW_VAL(x) (((x) << 11) & CICR3_VSW) /* Vertical sync pulse width */ +#define CICR3_LPF_VAL(x) (((x) << 0) & CICR3_LPF) /* Lines per frame */ + +#define CICR0_IRQ_MASK (CICR0_TOM | CICR0_RDAVM | CICR0_FEM | CICR0_EOLM | \ + CICR0_PERRM | CICR0_QDM | CICR0_CDM | CICR0_SOFM | \ + CICR0_EOFM | CICR0_FOM) + +static DEFINE_MUTEX(camera_lock); + +/* + * Structures + */ +enum pxa_camera_active_dma { + DMA_Y = 0x1, + DMA_U = 0x2, + DMA_V = 0x4, +}; + +/* descriptor needed for the PXA DMA engine */ +struct pxa_cam_dma { + dma_addr_t sg_dma; + struct pxa_dma_desc *sg_cpu; + size_t sg_size; + int sglen; +}; + +/* buffer for one video frame */ +struct pxa_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + const struct soc_camera_data_format *fmt; + + /* our descriptor lists for Y, U and V channels */ + struct pxa_cam_dma dmas[3]; + + int inwork; + + enum pxa_camera_active_dma active_dma; +}; + +struct pxa_camera_dev { + struct device *dev; + /* PXA27x is only supposed to handle one camera on its Quick Capture + * interface. If anyone ever builds hardware to enable more than + * one camera, they will have to modify this driver too */ + struct soc_camera_device *icd; + struct clk *clk; + + unsigned int irq; + void __iomem *base; + + int channels; + unsigned int dma_chans[3]; + + struct pxacamera_platform_data *pdata; + struct resource *res; + unsigned long platform_flags; + unsigned long platform_mclk_10khz; + + struct list_head capture; + + spinlock_t lock; + + struct pxa_buffer *active; + struct pxa_dma_desc *sg_tail[3]; +}; + +static const char *pxa_cam_driver_description = "PXA_Camera"; + +static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ + +/* + * Videobuf operations + */ +static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, + unsigned int *size) +{ + struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + + dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size); + + /* planar capture requires Y, U and V buffers to be page aligned */ + if (pcdev->channels == 3) { + *size = PAGE_ALIGN(icd->width * icd->height); /* Y pages */ + *size += PAGE_ALIGN(icd->width * icd->height / 2); /* U pages */ + *size += PAGE_ALIGN(icd->width * icd->height / 2); /* V pages */ + } else { + *size = icd->width * icd->height * + ((icd->current_fmt->depth + 7) >> 3); + } + + if (0 == *count) + *count = 32; + while (*size * *count > vid_limit * 1024 * 1024) + (*count)--; + + return 0; +} + +static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf) +{ + struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + int i; + + BUG_ON(in_interrupt()); + + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + &buf->vb, buf->vb.baddr, buf->vb.bsize); + + /* This waits until this buffer is out of danger, i.e., until it is no + * longer in STATE_QUEUED or STATE_ACTIVE */ + videobuf_waiton(&buf->vb, 0, 0); + videobuf_dma_unmap(vq, dma); + videobuf_dma_free(dma); + + for (i = 0; i < ARRAY_SIZE(buf->dmas); i++) { + if (buf->dmas[i].sg_cpu) + dma_free_coherent(pcdev->dev, buf->dmas[i].sg_size, + buf->dmas[i].sg_cpu, + buf->dmas[i].sg_dma); + buf->dmas[i].sg_cpu = NULL; + } + + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev, + struct pxa_buffer *buf, + struct videobuf_dmabuf *dma, int channel, + int sglen, int sg_start, int cibr, + unsigned int size) +{ + struct pxa_cam_dma *pxa_dma = &buf->dmas[channel]; + int i; + + if (pxa_dma->sg_cpu) + dma_free_coherent(pcdev->dev, pxa_dma->sg_size, + pxa_dma->sg_cpu, pxa_dma->sg_dma); + + pxa_dma->sg_size = (sglen + 1) * sizeof(struct pxa_dma_desc); + pxa_dma->sg_cpu = dma_alloc_coherent(pcdev->dev, pxa_dma->sg_size, + &pxa_dma->sg_dma, GFP_KERNEL); + if (!pxa_dma->sg_cpu) + return -ENOMEM; + + pxa_dma->sglen = sglen; + + for (i = 0; i < sglen; i++) { + int sg_i = sg_start + i; + struct scatterlist *sg = dma->sglist; + unsigned int dma_len = sg_dma_len(&sg[sg_i]), xfer_len; + + pxa_dma->sg_cpu[i].dsadr = pcdev->res->start + cibr; + pxa_dma->sg_cpu[i].dtadr = sg_dma_address(&sg[sg_i]); + + /* PXA27x Developer's Manual 27.4.4.1: round up to 8 bytes */ + xfer_len = (min(dma_len, size) + 7) & ~7; + + pxa_dma->sg_cpu[i].dcmd = + DCMD_FLOWSRC | DCMD_BURST8 | DCMD_INCTRGADDR | xfer_len; + size -= dma_len; + pxa_dma->sg_cpu[i].ddadr = + pxa_dma->sg_dma + (i + 1) * sizeof(struct pxa_dma_desc); + } + + pxa_dma->sg_cpu[sglen - 1].ddadr = DDADR_STOP; + pxa_dma->sg_cpu[sglen - 1].dcmd |= DCMD_ENDIRQEN; + + return 0; +} + +static int pxa_videobuf_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb); + int ret; + int sglen_y, sglen_yu = 0, sglen_u = 0, sglen_v = 0; + int size_y, size_u = 0, size_v = 0; + + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + /* Added list head initialization on alloc */ + WARN_ON(!list_empty(&vb->queue)); + +#ifdef DEBUG + /* This can be useful if you want to see if we actually fill + * the buffer with something */ + memset((void *)vb->baddr, 0xaa, vb->bsize); +#endif + + BUG_ON(NULL == icd->current_fmt); + + /* I think, in buf_prepare you only have to protect global data, + * the actual buffer is yours */ + buf->inwork = 1; + + if (buf->fmt != icd->current_fmt || + vb->width != icd->width || + vb->height != icd->height || + vb->field != field) { + buf->fmt = icd->current_fmt; + vb->width = icd->width; + vb->height = icd->height; + vb->field = field; + vb->state = VIDEOBUF_NEEDS_INIT; + } + + vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3); + if (0 != vb->baddr && vb->bsize < vb->size) { + ret = -EINVAL; + goto out; + } + + if (vb->state == VIDEOBUF_NEEDS_INIT) { + unsigned int size = vb->size; + struct videobuf_dmabuf *dma = videobuf_to_dma(vb); + + ret = videobuf_iolock(vq, vb, NULL); + if (ret) + goto fail; + + if (pcdev->channels == 3) { + /* FIXME the calculations should be more precise */ + sglen_y = dma->sglen / 2; + sglen_u = sglen_v = dma->sglen / 4 + 1; + sglen_yu = sglen_y + sglen_u; + size_y = size / 2; + size_u = size_v = size / 4; + } else { + sglen_y = dma->sglen; + size_y = size; + } + + /* init DMA for Y channel */ + ret = pxa_init_dma_channel(pcdev, buf, dma, 0, sglen_y, + 0, 0x28, size_y); + + if (ret) { + dev_err(pcdev->dev, + "DMA initialization for Y/RGB failed\n"); + goto fail; + } + + if (pcdev->channels == 3) { + /* init DMA for U channel */ + ret = pxa_init_dma_channel(pcdev, buf, dma, 1, sglen_u, + sglen_y, 0x30, size_u); + if (ret) { + dev_err(pcdev->dev, + "DMA initialization for U failed\n"); + goto fail_u; + } + + /* init DMA for V channel */ + ret = pxa_init_dma_channel(pcdev, buf, dma, 2, sglen_v, + sglen_yu, 0x38, size_v); + if (ret) { + dev_err(pcdev->dev, + "DMA initialization for V failed\n"); + goto fail_v; + } + } + + vb->state = VIDEOBUF_PREPARED; + } + + buf->inwork = 0; + buf->active_dma = DMA_Y; + if (pcdev->channels == 3) + buf->active_dma |= DMA_U | DMA_V; + + return 0; + +fail_v: + dma_free_coherent(pcdev->dev, buf->dmas[1].sg_size, + buf->dmas[1].sg_cpu, buf->dmas[1].sg_dma); +fail_u: + dma_free_coherent(pcdev->dev, buf->dmas[0].sg_size, + buf->dmas[0].sg_cpu, buf->dmas[0].sg_dma); +fail: + free_buffer(vq, buf); +out: + buf->inwork = 0; + return ret; +} + +static void pxa_videobuf_queue(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb); + struct pxa_buffer *active; + unsigned long flags; + int i; + + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + spin_lock_irqsave(&pcdev->lock, flags); + + list_add_tail(&vb->queue, &pcdev->capture); + + vb->state = VIDEOBUF_ACTIVE; + active = pcdev->active; + + if (!active) { + CIFR |= CIFR_RESET_F; + + for (i = 0; i < pcdev->channels; i++) { + DDADR(pcdev->dma_chans[i]) = buf->dmas[i].sg_dma; + DCSR(pcdev->dma_chans[i]) = DCSR_RUN; + pcdev->sg_tail[i] = buf->dmas[i].sg_cpu + buf->dmas[i].sglen - 1; + } + + pcdev->active = buf; + CICR0 |= CICR0_ENB; + } else { + struct pxa_cam_dma *buf_dma; + struct pxa_cam_dma *act_dma; + int nents; + + for (i = 0; i < pcdev->channels; i++) { + buf_dma = &buf->dmas[i]; + act_dma = &active->dmas[i]; + nents = buf_dma->sglen; + + /* Stop DMA engine */ + DCSR(pcdev->dma_chans[i]) = 0; + + /* Add the descriptors we just initialized to + the currently running chain */ + pcdev->sg_tail[i]->ddadr = buf_dma->sg_dma; + pcdev->sg_tail[i] = buf_dma->sg_cpu + buf_dma->sglen - 1; + + /* Setup a dummy descriptor with the DMA engines current + * state + */ + buf_dma->sg_cpu[nents].dsadr = + pcdev->res->start + 0x28 + i*8; /* CIBRx */ + buf_dma->sg_cpu[nents].dtadr = + DTADR(pcdev->dma_chans[i]); + buf_dma->sg_cpu[nents].dcmd = + DCMD(pcdev->dma_chans[i]); + + if (DDADR(pcdev->dma_chans[i]) == DDADR_STOP) { + /* The DMA engine is on the last + descriptor, set the next descriptors + address to the descriptors we just + initialized */ + buf_dma->sg_cpu[nents].ddadr = buf_dma->sg_dma; + } else { + buf_dma->sg_cpu[nents].ddadr = + DDADR(pcdev->dma_chans[i]); + } + + /* The next descriptor is the dummy descriptor */ + DDADR(pcdev->dma_chans[i]) = buf_dma->sg_dma + nents * + sizeof(struct pxa_dma_desc); + + DCSR(pcdev->dma_chans[i]) = DCSR_RUN; + } + } + + spin_unlock_irqrestore(&pcdev->lock, flags); +} + +static void pxa_videobuf_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb); +#ifdef DEBUG + struct soc_camera_device *icd = vq->priv_data; + + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + switch (vb->state) { + case VIDEOBUF_ACTIVE: + dev_dbg(&icd->dev, "%s (active)\n", __func__); + break; + case VIDEOBUF_QUEUED: + dev_dbg(&icd->dev, "%s (queued)\n", __func__); + break; + case VIDEOBUF_PREPARED: + dev_dbg(&icd->dev, "%s (prepared)\n", __func__); + break; + default: + dev_dbg(&icd->dev, "%s (unknown)\n", __func__); + break; + } +#endif + + free_buffer(vq, buf); +} + +static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev, + struct videobuf_buffer *vb, + struct pxa_buffer *buf) +{ + /* _init is used to debug races, see comment in pxa_camera_reqbufs() */ + list_del_init(&vb->queue); + vb->state = VIDEOBUF_DONE; + do_gettimeofday(&vb->ts); + vb->field_count++; + wake_up(&vb->done); + + if (list_empty(&pcdev->capture)) { + pcdev->active = NULL; + DCSR(pcdev->dma_chans[0]) = 0; + DCSR(pcdev->dma_chans[1]) = 0; + DCSR(pcdev->dma_chans[2]) = 0; + CICR0 &= ~CICR0_ENB; + return; + } + + pcdev->active = list_entry(pcdev->capture.next, + struct pxa_buffer, vb.queue); +} + +static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev, + enum pxa_camera_active_dma act_dma) +{ + struct pxa_buffer *buf; + unsigned long flags; + u32 status, camera_status, overrun; + struct videobuf_buffer *vb; + + spin_lock_irqsave(&pcdev->lock, flags); + + status = DCSR(channel); + DCSR(channel) = status | DCSR_ENDINTR; + + if (status & DCSR_BUSERR) { + dev_err(pcdev->dev, "DMA Bus Error IRQ!\n"); + goto out; + } + + if (!(status & DCSR_ENDINTR)) { + dev_err(pcdev->dev, "Unknown DMA IRQ source, " + "status: 0x%08x\n", status); + goto out; + } + + if (!pcdev->active) { + dev_err(pcdev->dev, "DMA End IRQ with no active buffer!\n"); + goto out; + } + + camera_status = CISR; + overrun = CISR_IFO_0; + if (pcdev->channels == 3) + overrun |= CISR_IFO_1 | CISR_IFO_2; + if (camera_status & overrun) { + dev_dbg(pcdev->dev, "FIFO overrun! CISR: %x\n", camera_status); + /* Stop the Capture Interface */ + CICR0 &= ~CICR0_ENB; + /* Stop DMA */ + DCSR(channel) = 0; + /* Reset the FIFOs */ + CIFR |= CIFR_RESET_F; + /* Enable End-Of-Frame Interrupt */ + CICR0 &= ~CICR0_EOFM; + /* Restart the Capture Interface */ + CICR0 |= CICR0_ENB; + goto out; + } + + vb = &pcdev->active->vb; + buf = container_of(vb, struct pxa_buffer, vb); + WARN_ON(buf->inwork || list_empty(&vb->queue)); + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + buf->active_dma &= ~act_dma; + if (!buf->active_dma) + pxa_camera_wakeup(pcdev, vb, buf); + +out: + spin_unlock_irqrestore(&pcdev->lock, flags); +} + +static void pxa_camera_dma_irq_y(int channel, void *data) +{ + struct pxa_camera_dev *pcdev = data; + pxa_camera_dma_irq(channel, pcdev, DMA_Y); +} + +static void pxa_camera_dma_irq_u(int channel, void *data) +{ + struct pxa_camera_dev *pcdev = data; + pxa_camera_dma_irq(channel, pcdev, DMA_U); +} + +static void pxa_camera_dma_irq_v(int channel, void *data) +{ + struct pxa_camera_dev *pcdev = data; + pxa_camera_dma_irq(channel, pcdev, DMA_V); +} + +static struct videobuf_queue_ops pxa_videobuf_ops = { + .buf_setup = pxa_videobuf_setup, + .buf_prepare = pxa_videobuf_prepare, + .buf_queue = pxa_videobuf_queue, + .buf_release = pxa_videobuf_release, +}; + +static int mclk_get_divisor(struct pxa_camera_dev *pcdev) +{ + unsigned int mclk_10khz = pcdev->platform_mclk_10khz; + unsigned long div; + unsigned long lcdclk; + + lcdclk = clk_get_rate(pcdev->clk) / 10000; + + /* We verify platform_mclk_10khz != 0, so if anyone breaks it, here + * they get a nice Oops */ + div = (lcdclk + 2 * mclk_10khz - 1) / (2 * mclk_10khz) - 1; + + dev_dbg(pcdev->dev, "LCD clock %lukHz, target freq %dkHz, " + "divisor %lu\n", lcdclk * 10, mclk_10khz * 10, div); + + return div; +} + +static void pxa_camera_activate(struct pxa_camera_dev *pcdev) +{ + struct pxacamera_platform_data *pdata = pcdev->pdata; + u32 cicr4 = 0; + + dev_dbg(pcdev->dev, "Registered platform device at %p data %p\n", + pcdev, pdata); + + if (pdata && pdata->init) { + dev_dbg(pcdev->dev, "%s: Init gpios\n", __func__); + pdata->init(pcdev->dev); + } + + if (pdata && pdata->power) { + dev_dbg(pcdev->dev, "%s: Power on camera\n", __func__); + pdata->power(pcdev->dev, 1); + } + + if (pdata && pdata->reset) { + dev_dbg(pcdev->dev, "%s: Releasing camera reset\n", + __func__); + pdata->reset(pcdev->dev, 1); + } + + CICR0 = 0x3FF; /* disable all interrupts */ + + if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN) + cicr4 |= CICR4_PCLK_EN; + if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN) + cicr4 |= CICR4_MCLK_EN; + if (pcdev->platform_flags & PXA_CAMERA_PCP) + cicr4 |= CICR4_PCP; + if (pcdev->platform_flags & PXA_CAMERA_HSP) + cicr4 |= CICR4_HSP; + if (pcdev->platform_flags & PXA_CAMERA_VSP) + cicr4 |= CICR4_VSP; + + CICR4 = mclk_get_divisor(pcdev) | cicr4; + + clk_enable(pcdev->clk); +} + +static void pxa_camera_deactivate(struct pxa_camera_dev *pcdev) +{ + struct pxacamera_platform_data *board = pcdev->pdata; + + clk_disable(pcdev->clk); + + if (board && board->reset) { + dev_dbg(pcdev->dev, "%s: Asserting camera reset\n", + __func__); + board->reset(pcdev->dev, 0); + } + + if (board && board->power) { + dev_dbg(pcdev->dev, "%s: Power off camera\n", __func__); + board->power(pcdev->dev, 0); + } +} + +static irqreturn_t pxa_camera_irq(int irq, void *data) +{ + struct pxa_camera_dev *pcdev = data; + unsigned int status = CISR; + + dev_dbg(pcdev->dev, "Camera interrupt status 0x%x\n", status); + + if (!status) + return IRQ_NONE; + + CISR = status; + + if (status & CISR_EOF) { + int i; + for (i = 0; i < pcdev->channels; i++) { + DDADR(pcdev->dma_chans[i]) = + pcdev->active->dmas[i].sg_dma; + DCSR(pcdev->dma_chans[i]) = DCSR_RUN; + } + CICR0 |= CICR0_EOFM; + } + + return IRQ_HANDLED; +} + +/* The following two functions absolutely depend on the fact, that + * there can be only one camera on PXA quick capture interface */ +static int pxa_camera_add_device(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + int ret; + + mutex_lock(&camera_lock); + + if (pcdev->icd) { + ret = -EBUSY; + goto ebusy; + } + + dev_info(&icd->dev, "PXA Camera driver attached to camera %d\n", + icd->devnum); + + pxa_camera_activate(pcdev); + ret = icd->ops->init(icd); + + if (!ret) + pcdev->icd = icd; + +ebusy: + mutex_unlock(&camera_lock); + + return ret; +} + +static void pxa_camera_remove_device(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + + BUG_ON(icd != pcdev->icd); + + dev_info(&icd->dev, "PXA Camera driver detached from camera %d\n", + icd->devnum); + + /* disable capture, disable interrupts */ + CICR0 = 0x3ff; + + /* Stop DMA engine */ + DCSR(pcdev->dma_chans[0]) = 0; + DCSR(pcdev->dma_chans[1]) = 0; + DCSR(pcdev->dma_chans[2]) = 0; + + icd->ops->release(icd); + + pxa_camera_deactivate(pcdev); + + pcdev->icd = NULL; +} + +static int test_platform_param(struct pxa_camera_dev *pcdev, + unsigned char buswidth, unsigned long *flags) +{ + /* + * Platform specified synchronization and pixel clock polarities are + * only a recommendation and are only used during probing. The PXA270 + * quick capture interface supports both. + */ + *flags = (pcdev->platform_flags & PXA_CAMERA_MASTER ? + SOCAM_MASTER : SOCAM_SLAVE) | + SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_HSYNC_ACTIVE_LOW | + SOCAM_VSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_LOW | + SOCAM_PCLK_SAMPLE_RISING | + SOCAM_PCLK_SAMPLE_FALLING; + + /* If requested data width is supported by the platform, use it */ + switch (buswidth) { + case 10: + if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_10)) + return -EINVAL; + *flags |= SOCAM_DATAWIDTH_10; + break; + case 9: + if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_9)) + return -EINVAL; + *flags |= SOCAM_DATAWIDTH_9; + break; + case 8: + if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8)) + return -EINVAL; + *flags |= SOCAM_DATAWIDTH_8; + } + + return 0; +} + +static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + unsigned long dw, bpp, bus_flags, camera_flags, common_flags; + u32 cicr0, cicr1, cicr4 = 0; + int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags); + + if (ret < 0) + return ret; + + camera_flags = icd->ops->query_bus_param(icd); + + common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags); + if (!common_flags) + return -EINVAL; + + pcdev->channels = 1; + + /* Make choises, based on platform preferences */ + if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) && + (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) { + if (pcdev->platform_flags & PXA_CAMERA_HSP) + common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH; + else + common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW; + } + + if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) && + (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) { + if (pcdev->platform_flags & PXA_CAMERA_VSP) + common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH; + else + common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW; + } + + if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && + (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { + if (pcdev->platform_flags & PXA_CAMERA_PCP) + common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; + else + common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; + } + + ret = icd->ops->set_bus_param(icd, common_flags); + if (ret < 0) + return ret; + + /* Datawidth is now guaranteed to be equal to one of the three values. + * We fix bit-per-pixel equal to data-width... */ + switch (common_flags & SOCAM_DATAWIDTH_MASK) { + case SOCAM_DATAWIDTH_10: + icd->buswidth = 10; + dw = 4; + bpp = 0x40; + break; + case SOCAM_DATAWIDTH_9: + icd->buswidth = 9; + dw = 3; + bpp = 0x20; + break; + default: + /* Actually it can only be 8 now, + * default is just to silence compiler warnings */ + case SOCAM_DATAWIDTH_8: + icd->buswidth = 8; + dw = 2; + bpp = 0; + } + + if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN) + cicr4 |= CICR4_PCLK_EN; + if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN) + cicr4 |= CICR4_MCLK_EN; + if (common_flags & SOCAM_PCLK_SAMPLE_FALLING) + cicr4 |= CICR4_PCP; + if (common_flags & SOCAM_HSYNC_ACTIVE_LOW) + cicr4 |= CICR4_HSP; + if (common_flags & SOCAM_VSYNC_ACTIVE_LOW) + cicr4 |= CICR4_VSP; + + cicr0 = CICR0; + if (cicr0 & CICR0_ENB) + CICR0 = cicr0 & ~CICR0_ENB; + + cicr1 = CICR1_PPL_VAL(icd->width - 1) | bpp | dw; + + switch (pixfmt) { + case V4L2_PIX_FMT_YUV422P: + pcdev->channels = 3; + cicr1 |= CICR1_YCBCR_F; + case V4L2_PIX_FMT_YUYV: + cicr1 |= CICR1_COLOR_SP_VAL(2); + break; + case V4L2_PIX_FMT_RGB555: + cicr1 |= CICR1_RGB_BPP_VAL(1) | CICR1_RGBT_CONV_VAL(2) | + CICR1_TBIT | CICR1_COLOR_SP_VAL(1); + break; + case V4L2_PIX_FMT_RGB565: + cicr1 |= CICR1_COLOR_SP_VAL(1) | CICR1_RGB_BPP_VAL(2); + break; + } + + CICR1 = cicr1; + CICR2 = 0; + CICR3 = CICR3_LPF_VAL(icd->height - 1) | + CICR3_BFW_VAL(min((unsigned short)255, icd->y_skip_top)); + CICR4 = mclk_get_divisor(pcdev) | cicr4; + + /* CIF interrupts are not used, only DMA */ + CICR0 = (pcdev->platform_flags & PXA_CAMERA_MASTER ? + CICR0_SIM_MP : (CICR0_SL_CAP_EN | CICR0_SIM_SP)) | + CICR0_DMAEN | CICR0_IRQ_MASK | (cicr0 & CICR0_ENB); + + return 0; +} + +static int pxa_camera_try_bus_param(struct soc_camera_device *icd, __u32 pixfmt) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + unsigned long bus_flags, camera_flags; + int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags); + + if (ret < 0) + return ret; + + camera_flags = icd->ops->query_bus_param(icd); + + return soc_camera_bus_param_compatible(camera_flags, bus_flags) ? 0 : -EINVAL; +} + +static int pxa_camera_set_fmt_cap(struct soc_camera_device *icd, + __u32 pixfmt, struct v4l2_rect *rect) +{ + return icd->ops->set_fmt_cap(icd, pixfmt, rect); +} + +static int pxa_camera_try_fmt_cap(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + /* limit to pxa hardware capabilities */ + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.height > 2048) + f->fmt.pix.height = 2048; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.width > 2048) + f->fmt.pix.width = 2048; + f->fmt.pix.width &= ~0x01; + + /* limit to sensor capabilities */ + return icd->ops->try_fmt_cap(icd, f); +} + +static int pxa_camera_reqbufs(struct soc_camera_file *icf, + struct v4l2_requestbuffers *p) +{ + int i; + + /* This is for locking debugging only. I removed spinlocks and now I + * check whether .prepare is ever called on a linked buffer, or whether + * a dma IRQ can occur for an in-work or unlinked buffer. Until now + * it hadn't triggered */ + for (i = 0; i < p->count; i++) { + struct pxa_buffer *buf = container_of(icf->vb_vidq.bufs[i], + struct pxa_buffer, vb); + buf->inwork = 0; + INIT_LIST_HEAD(&buf->vb.queue); + } + + return 0; +} + +static unsigned int pxa_camera_poll(struct file *file, poll_table *pt) +{ + struct soc_camera_file *icf = file->private_data; + struct pxa_buffer *buf; + + buf = list_entry(icf->vb_vidq.stream.next, struct pxa_buffer, + vb.stream); + + poll_wait(file, &buf->vb.done, pt); + + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + return POLLIN|POLLRDNORM; + + return 0; +} + +static int pxa_camera_querycap(struct soc_camera_host *ici, + struct v4l2_capability *cap) +{ + /* cap->name is set by the firendly caller:-> */ + strlcpy(cap->card, pxa_cam_driver_description, sizeof(cap->card)); + cap->version = PXA_CAM_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + + return 0; +} + +static spinlock_t *pxa_camera_spinlock_alloc(struct soc_camera_file *icf) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icf->icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + + return &pcdev->lock; +} + +static struct soc_camera_host_ops pxa_soc_camera_host_ops = { + .owner = THIS_MODULE, + .add = pxa_camera_add_device, + .remove = pxa_camera_remove_device, + .set_fmt_cap = pxa_camera_set_fmt_cap, + .try_fmt_cap = pxa_camera_try_fmt_cap, + .reqbufs = pxa_camera_reqbufs, + .poll = pxa_camera_poll, + .querycap = pxa_camera_querycap, + .try_bus_param = pxa_camera_try_bus_param, + .set_bus_param = pxa_camera_set_bus_param, + .spinlock_alloc = pxa_camera_spinlock_alloc, +}; + +/* Should be allocated dynamically too, but we have only one. */ +static struct soc_camera_host pxa_soc_camera_host = { + .drv_name = PXA_CAM_DRV_NAME, + .vbq_ops = &pxa_videobuf_ops, + .msize = sizeof(struct pxa_buffer), + .ops = &pxa_soc_camera_host_ops, +}; + +static int pxa_camera_probe(struct platform_device *pdev) +{ + struct pxa_camera_dev *pcdev; + struct resource *res; + void __iomem *base; + int irq; + int err = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (!res || irq < 0) { + err = -ENODEV; + goto exit; + } + + pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL); + if (!pcdev) { + dev_err(&pdev->dev, "Could not allocate pcdev\n"); + err = -ENOMEM; + goto exit; + } + + pcdev->clk = clk_get(&pdev->dev, "CAMCLK"); + if (IS_ERR(pcdev->clk)) { + err = PTR_ERR(pcdev->clk); + goto exit_kfree; + } + + dev_set_drvdata(&pdev->dev, pcdev); + pcdev->res = res; + + pcdev->pdata = pdev->dev.platform_data; + pcdev->platform_flags = pcdev->pdata->flags; + if (!(pcdev->platform_flags & (PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_DATAWIDTH_9 | PXA_CAMERA_DATAWIDTH_10))) { + /* Platform hasn't set available data widths. This is bad. + * Warn and use a default. */ + dev_warn(&pdev->dev, "WARNING! Platform hasn't set available " + "data widths, using default 10 bit\n"); + pcdev->platform_flags |= PXA_CAMERA_DATAWIDTH_10; + } + pcdev->platform_mclk_10khz = pcdev->pdata->mclk_10khz; + if (!pcdev->platform_mclk_10khz) { + dev_warn(&pdev->dev, + "mclk_10khz == 0! Please, fix your platform data. " + "Using default 20MHz\n"); + pcdev->platform_mclk_10khz = 2000; + } + + INIT_LIST_HEAD(&pcdev->capture); + spin_lock_init(&pcdev->lock); + + /* + * Request the regions. + */ + if (!request_mem_region(res->start, res->end - res->start + 1, + PXA_CAM_DRV_NAME)) { + err = -EBUSY; + goto exit_clk; + } + + base = ioremap(res->start, res->end - res->start + 1); + if (!base) { + err = -ENOMEM; + goto exit_release; + } + pcdev->irq = irq; + pcdev->base = base; + pcdev->dev = &pdev->dev; + + /* request dma */ + pcdev->dma_chans[0] = pxa_request_dma("CI_Y", DMA_PRIO_HIGH, + pxa_camera_dma_irq_y, pcdev); + if (pcdev->dma_chans[0] < 0) { + dev_err(pcdev->dev, "Can't request DMA for Y\n"); + err = -ENOMEM; + goto exit_iounmap; + } + dev_dbg(pcdev->dev, "got DMA channel %d\n", pcdev->dma_chans[0]); + + pcdev->dma_chans[1] = pxa_request_dma("CI_U", DMA_PRIO_HIGH, + pxa_camera_dma_irq_u, pcdev); + if (pcdev->dma_chans[1] < 0) { + dev_err(pcdev->dev, "Can't request DMA for U\n"); + err = -ENOMEM; + goto exit_free_dma_y; + } + dev_dbg(pcdev->dev, "got DMA channel (U) %d\n", pcdev->dma_chans[1]); + + pcdev->dma_chans[2] = pxa_request_dma("CI_V", DMA_PRIO_HIGH, + pxa_camera_dma_irq_v, pcdev); + if (pcdev->dma_chans[0] < 0) { + dev_err(pcdev->dev, "Can't request DMA for V\n"); + err = -ENOMEM; + goto exit_free_dma_u; + } + dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]); + + DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD; + DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD; + DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD; + + /* request irq */ + err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME, + pcdev); + if (err) { + dev_err(pcdev->dev, "Camera interrupt register failed \n"); + goto exit_free_dma; + } + + pxa_soc_camera_host.priv = pcdev; + pxa_soc_camera_host.dev.parent = &pdev->dev; + pxa_soc_camera_host.nr = pdev->id; + err = soc_camera_host_register(&pxa_soc_camera_host); + if (err) + goto exit_free_irq; + + return 0; + +exit_free_irq: + free_irq(pcdev->irq, pcdev); +exit_free_dma: + pxa_free_dma(pcdev->dma_chans[2]); +exit_free_dma_u: + pxa_free_dma(pcdev->dma_chans[1]); +exit_free_dma_y: + pxa_free_dma(pcdev->dma_chans[0]); +exit_iounmap: + iounmap(base); +exit_release: + release_mem_region(res->start, res->end - res->start + 1); +exit_clk: + clk_put(pcdev->clk); +exit_kfree: + kfree(pcdev); +exit: + return err; +} + +static int __devexit pxa_camera_remove(struct platform_device *pdev) +{ + struct pxa_camera_dev *pcdev = platform_get_drvdata(pdev); + struct resource *res; + + clk_put(pcdev->clk); + + pxa_free_dma(pcdev->dma_chans[0]); + pxa_free_dma(pcdev->dma_chans[1]); + pxa_free_dma(pcdev->dma_chans[2]); + free_irq(pcdev->irq, pcdev); + + soc_camera_host_unregister(&pxa_soc_camera_host); + + iounmap(pcdev->base); + + res = pcdev->res; + release_mem_region(res->start, res->end - res->start + 1); + + kfree(pcdev); + + dev_info(&pdev->dev, "PXA Camera driver unloaded\n"); + + return 0; +} + +static struct platform_driver pxa_camera_driver = { + .driver = { + .name = PXA_CAM_DRV_NAME, + }, + .probe = pxa_camera_probe, + .remove = __exit_p(pxa_camera_remove), +}; + + +static int __devinit pxa_camera_init(void) +{ + return platform_driver_register(&pxa_camera_driver); +} + +static void __exit pxa_camera_exit(void) +{ + return platform_driver_unregister(&pxa_camera_driver); +} + +module_init(pxa_camera_init); +module_exit(pxa_camera_exit); + +MODULE_DESCRIPTION("PXA27x SoC Camera Host driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index f55d6e85f20..ec8c65dc840 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -701,7 +701,9 @@ static const struct file_operations saa_fops = { .open = saa5249_open, .release = saa5249_release, .ioctl = saa5249_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index 72e344a12c7..716ee7f64df 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -44,10 +44,10 @@ static unsigned short normal_i2c[] = { I2C_CLIENT_INSMOD; /* insmod options */ -static unsigned int debug = 0; -static unsigned int xtal = 0; -static unsigned int rbds = 0; -static unsigned int plvl = 0; +static unsigned int debug; +static unsigned int xtal; +static unsigned int rbds; +static unsigned int plvl; static unsigned int bufblocks = 100; module_param(debug, int, 0644); diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 061134a7ba9..4aa82b31070 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -46,7 +46,7 @@ MODULE_LICENSE("GPL"); #include <media/v4l2-common.h> #include <linux/video_decoder.h> -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -488,7 +488,7 @@ saa7110_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; @@ -496,7 +496,7 @@ saa7110_detect_client (struct i2c_adapter *adapter, strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client))); decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL); - if (decoder == 0) { + if (!decoder) { kfree(client); return -ENOMEM; } diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c index 7ae2d646d00..96c3d435772 100644 --- a/drivers/media/video/saa7111.c +++ b/drivers/media/video/saa7111.c @@ -55,7 +55,7 @@ MODULE_LICENSE("GPL"); #define I2C_NAME(s) (s)->name -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -502,7 +502,7 @@ saa7111_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c index 677df51de1a..e79075533be 100644 --- a/drivers/media/video/saa7114.c +++ b/drivers/media/video/saa7114.c @@ -56,7 +56,7 @@ MODULE_LICENSE("GPL"); #define I2C_NAME(x) (x)->name -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -841,7 +841,7 @@ saa7114_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 41e5e518a47..435c083cc54 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -57,7 +57,7 @@ MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " "Hans Verkuil, Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); -static int debug = 0; +static int debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -957,7 +957,7 @@ static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std) if (std == V4L2_STD_PAL_M) { reg |= 0x30; - } else if (std == V4L2_STD_PAL_N) { + } else if (std == V4L2_STD_PAL_Nc) { reg |= 0x20; } else if (std == V4L2_STD_PAL_60) { reg |= 0x10; @@ -1450,19 +1450,19 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar /* ----------------------------------------------------------------------- */ -static int saa7115_probe(struct i2c_client *client) +static int saa7115_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct saa711x_state *state; int i; char name[17]; - u8 chip_id; + char chip_id; + int autodetect = !id || id->driver_data == 1; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - snprintf(client->name, sizeof(client->name) - 1, "saa7115"); - for (i = 0; i < 0x0f; i++) { saa711x_write(client, 0, i); name[i] = (saa711x_read(client, 0) & 0x0f) + '0'; @@ -1471,8 +1471,7 @@ static int saa7115_probe(struct i2c_client *client) } name[i] = '\0'; - saa711x_write(client, 0, 5); - chip_id = saa711x_read(client, 0) & 0x0f; + chip_id = name[5]; /* Check whether this chip is part of the saa711x series */ if (memcmp(name, "1f711", 5)) { @@ -1481,8 +1480,14 @@ static int saa7115_probe(struct i2c_client *client) return -ENODEV; } - snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id); - v4l_info(client, "saa711%d found (%s) @ 0x%x (%s)\n", chip_id, name, client->addr << 1, client->adapter->name); + /* Safety check */ + if (!autodetect && id->name[6] != chip_id) { + v4l_warn(client, "found saa711%c while %s was expected\n", + chip_id, id->name); + } + snprintf(client->name, sizeof(client->name), "saa711%c", chip_id); + v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name, + client->addr << 1, client->adapter->name); state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL); i2c_set_clientdata(client, state); @@ -1498,19 +1503,19 @@ static int saa7115_probe(struct i2c_client *client) state->hue = 0; state->sat = 64; switch (chip_id) { - case 1: + case '1': state->ident = V4L2_IDENT_SAA7111; break; - case 3: + case '3': state->ident = V4L2_IDENT_SAA7113; break; - case 4: + case '4': state->ident = V4L2_IDENT_SAA7114; break; - case 5: + case '5': state->ident = V4L2_IDENT_SAA7115; break; - case 8: + case '8': state->ident = V4L2_IDENT_SAA7118; break; default: @@ -1552,6 +1557,17 @@ static int saa7115_remove(struct i2c_client *client) return 0; } +static const struct i2c_device_id saa7115_id[] = { + { "saa711x", 1 }, /* autodetect */ + { "saa7111", 0 }, + { "saa7113", 0 }, + { "saa7114", 0 }, + { "saa7115", 0 }, + { "saa7118", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7115_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "saa7115", .driverid = I2C_DRIVERID_SAA711X, @@ -1559,5 +1575,6 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .probe = saa7115_probe, .remove = saa7115_remove, .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL, + .id_table = saa7115_id, }; diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c index 80bf9118785..cedb988574b 100644 --- a/drivers/media/video/saa711x.c +++ b/drivers/media/video/saa711x.c @@ -48,7 +48,7 @@ MODULE_LICENSE("GPL"); #include <linux/video_decoder.h> -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, " Set the default Debug level. Default: 0 (Off) - (0-1)"); diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index 06c88db656b..79d11a658bd 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -661,7 +661,8 @@ static int saa7127_command(struct i2c_client *client, /* ----------------------------------------------------------------------- */ -static int saa7127_probe(struct i2c_client *client) +static int saa7127_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct saa7127_state *state; struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 }; /* set to disabled */ @@ -671,8 +672,6 @@ static int saa7127_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - snprintf(client->name, sizeof(client->name) - 1, "saa7127"); - v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n", client->addr << 1); @@ -740,11 +739,18 @@ static int saa7127_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static struct i2c_device_id saa7127_id[] = { + { "saa7127", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7127_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "saa7127", .driverid = I2C_DRIVERID_SAA7127, .command = saa7127_command, .probe = saa7127_probe, .remove = saa7127_remove, + .id_table = saa7127_id, }; diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index 96bc3b1298a..83f076abce3 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -27,6 +27,7 @@ config VIDEO_SAA7134_ALSA config VIDEO_SAA7134_DVB tristate "DVB/ATSC Support for saa7134 based TV cards" depends on VIDEO_SAA7134 && DVB_CORE + depends on HOTPLUG # due to FW_LOADER select VIDEOBUF_DVB select FW_LOADER select DVB_PLL if !DVB_FE_CUSTOMISE @@ -35,8 +36,9 @@ config VIDEO_SAA7134_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE - select DVB_TDA827X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE ---help--- This adds support for DVB cards based on the Philips saa7134 chip. diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile index 9aff937ba7a..3dbaa19a6d0 100644 --- a/drivers/media/video/saa7134/Makefile +++ b/drivers/media/video/saa7134/Makefile @@ -11,5 +11,6 @@ obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 047add8f301..f118de6e367 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -31,7 +31,7 @@ #include "saa7134.h" #include "saa7134-reg.h" -static unsigned int debug = 0; +static unsigned int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug,"enable debug messages [alsa]"); @@ -503,7 +503,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, /* release the old buffer */ if (substream->runtime->dma_area) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); + videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); substream->runtime->dma_area = NULL; } @@ -519,12 +519,12 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, return err; } - if (0 != (err = videobuf_pci_dma_map(dev->pci, &dev->dmasound.dma))) { + if (0 != (err = videobuf_sg_dma_map(&dev->pci->dev, &dev->dmasound.dma))) { dsp_buffer_free(dev); return err; } if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) { - videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); + videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); return err; } @@ -533,7 +533,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, dev->dmasound.dma.sglen, 0))) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); + videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); return err; } @@ -569,7 +569,7 @@ static int snd_card_saa7134_hw_free(struct snd_pcm_substream * substream) if (substream->runtime->dma_area) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); + videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); substream->runtime->dma_area = NULL; } @@ -613,9 +613,15 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) struct snd_pcm_runtime *runtime = substream->runtime; snd_card_saa7134_pcm_t *pcm; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); - struct saa7134_dev *dev = saa7134->dev; + struct saa7134_dev *dev; int amux, err; + if (!saa7134) { + printk(KERN_ERR "BUG: saa7134 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + dev = saa7134->dev; mutex_lock(&dev->dmasound.lock); dev->dmasound.read_count = 0; @@ -954,10 +960,8 @@ static void snd_saa7134_free(struct snd_card * card) if (chip->dev->dmasound.priv_data == NULL) return; - if (chip->irq >= 0) { - synchronize_irq(chip->irq); + if (chip->irq >= 0) free_irq(chip->irq, &chip->dev->dmasound); - } chip->dev->dmasound.priv_data = NULL; diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 6f5744286e8..2618cfa592e 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -22,11 +22,15 @@ #include <linux/init.h> #include <linux/module.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> #include "saa7134-reg.h" #include "saa7134.h" +#include "tuner-xc2028.h" #include <media/v4l2-common.h> #include <media/tveeprom.h> +#include "tea5767.h" /* commly used strings */ static char name_mute[] = "mute"; @@ -43,6 +47,9 @@ static char name_svideo[] = "S-Video"; /* ------------------------------------------------------------------ */ /* board config info */ +/* If radio_type !=UNSET, radio_addr should be specified + */ + struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_UNKNOWN] = { .name = "UNKNOWN/GENERIC", @@ -1046,7 +1053,7 @@ struct saa7134_board saa7134_boards[] = { }, [SAA7134_BOARD_MANLI_MTV002] = { /* Ognjen Nastic <ognjen@logosoft.ba> */ - .name = "Manli MuchTV M-TV002/Behold TV 403 FM", + .name = "Manli MuchTV M-TV002", .audio_clock = 0x00200000, .tuner_type = TUNER_PHILIPS_PAL, .radio_type = UNSET, @@ -1073,7 +1080,7 @@ struct saa7134_board saa7134_boards[] = { }, [SAA7134_BOARD_MANLI_MTV001] = { /* Ognjen Nastic <ognjen@logosoft.ba> UNTESTED */ - .name = "Manli MuchTV M-TV001/Behold TV 401", + .name = "Manli MuchTV M-TV001", .audio_clock = 0x00200000, .tuner_type = TUNER_PHILIPS_PAL, .radio_type = UNSET, @@ -2195,6 +2202,8 @@ struct saa7134_board saa7134_boards[] = { }, [SAA7134_BOARD_BEHOLD_409FM] = { /* <http://tuner.beholder.ru>, Sergey <skiv@orel.ru> */ + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 409 FM", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -2202,6 +2211,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, .inputs = {{ .name = name_tv, .vmux = 3, @@ -2908,15 +2918,13 @@ struct saa7134_board saa7134_boards[] = { }}, }, [SAA7134_BOARD_MD7134_BRIDGE_2] = { - /* This card has two saa7134 chips on it, - but only one of them is currently working. - The programming for the primary decoder is - in SAA7134_BOARD_MD7134 */ + /* The second saa7134 on this card only serves as DVB-S host bridge */ .name = "Medion 7134 Bridge #2", .audio_clock = 0x00187de7, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, }, [SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS] = { .name = "LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB", @@ -3082,7 +3090,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_type = TUNER_PHILIPS_TD1316, /* untested */ .radio_type = TUNER_TEA5767, /* untested */ .tuner_addr = ADDR_UNSET, - .radio_addr = ADDR_UNSET, + .radio_addr = 0x60, .tda9887_conf = TDA9887_PRESENT, .mpeg = SAA7134_MPEG_DVB, .inputs = {{ @@ -3330,7 +3338,7 @@ struct saa7134_board saa7134_boards[] = { /* Juan Pablo Sormani <sorman@gmail.com> */ .name = "Encore ENLTV-FM", .audio_clock = 0x00200000, - .tuner_type = TUNER_PHILIPS_ATSC, + .tuner_type = TUNER_PHILIPS_FCV1236D, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -3575,12 +3583,15 @@ struct saa7134_board saa7134_boards[] = { }}, }, [SAA7134_BOARD_BEHOLD_401] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 401", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FQ1216ME, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, .inputs = {{ .name = name_svideo, .vmux = 8, @@ -3601,12 +3612,15 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_BEHOLD_403] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 403", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FQ1216ME, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, .inputs = {{ .name = name_svideo, .vmux = 8, @@ -3623,12 +3637,15 @@ struct saa7134_board saa7134_boards[] = { }}, }, [SAA7134_BOARD_BEHOLD_403FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 403 FM", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FQ1216ME, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .gpiomask = 0x00008000, .inputs = {{ .name = name_svideo, .vmux = 8, @@ -3649,6 +3666,8 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_BEHOLD_405] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 405", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -3656,6 +3675,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, .inputs = {{ .name = name_svideo, .vmux = 8, @@ -3673,6 +3693,8 @@ struct saa7134_board saa7134_boards[] = { }, [SAA7134_BOARD_BEHOLD_405FM] = { /* Sergey <skiv@orel.ru> */ + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 405 FM", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -3680,6 +3702,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, .inputs = {{ .name = name_svideo, .vmux = 8, @@ -3700,6 +3723,8 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_BEHOLD_407] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 407", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -3707,7 +3732,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, - .gpiomask = 0xc0c000, + .gpiomask = 0x00008000, .inputs = {{ .name = name_svideo, .vmux = 8, @@ -3727,6 +3752,8 @@ struct saa7134_board saa7134_boards[] = { }}, }, [SAA7134_BOARD_BEHOLD_407FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 407 FM", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -3734,7 +3761,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, - .gpiomask = 0xc0c000, + .gpiomask = 0x00008000, .inputs = {{ .name = name_svideo, .vmux = 8, @@ -3759,6 +3786,8 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_BEHOLD_409] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 409", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -3766,6 +3795,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, .inputs = {{ .name = name_tv, .vmux = 3, @@ -3782,6 +3812,8 @@ struct saa7134_board saa7134_boards[] = { }}, }, [SAA7134_BOARD_BEHOLD_505FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 505 FM/RDS", .audio_clock = 0x00200000, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -3789,6 +3821,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, .inputs = {{ .name = name_tv, .vmux = 3, @@ -3813,6 +3846,8 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_BEHOLD_507_9FM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -3820,6 +3855,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00008000, .inputs = {{ .name = name_tv, .vmux = 3, @@ -3840,6 +3876,8 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = { + /* Beholder Intl. Ltd. 2008 */ + /*Dmitry Belimov <d.belimov@gmail.com> */ .name = "Beholder BeholdTV Columbus TVFM", .audio_clock = 0x00187de7, .tuner_type = TUNER_ALPS_TSBE5_PAL, @@ -3847,23 +3885,28 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x000A8004, .inputs = {{ .name = name_tv, .vmux = 3, .amux = TV, .tv = 1, - },{ + .gpio = 0x000A8004, + }, { .name = name_comp1, .vmux = 1, .amux = LINE1, - },{ + .gpio = 0x000A8000, + }, { .name = name_svideo, .vmux = 8, .amux = LINE1, - }}, + .gpio = 0x000A8000, + } }, .radio = { .name = name_radio, .amux = LINE2, + .gpio = 0x000A8000, }, }, [SAA7134_BOARD_BEHOLD_607_9FM] = { @@ -3992,6 +4035,248 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x6000, }, }, + [SAA7134_BOARD_PHILIPS_SNAKE] = { + .name = "NXP Snake DVB-S reference design", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_CREATIX_CTX953] = { + .name = "Medion/Creatix CTX953 Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 0, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_MSI_TVANYWHERE_AD11] = { + .name = "MSI TV@nywhere A/D v1.1", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 2, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_AVERMEDIA_CARDBUS_506] = { + .name = "AVerMedia Cardbus TV/Radio (E506R)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_AVERMEDIA_A16D] = { + .name = "AVerMedia Hybrid TV/Radio (A16D)", + .audio_clock = 0x187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_AVERMEDIA_M115] = { + .name = "Avermedia M115", + .audio_clock = 0x187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + }, + [SAA7134_BOARD_VIDEOMATE_T750] = { + /* John Newbigin <jn@it.swin.edu.au> */ + .name = "Compro VideoMate T750", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_XC2028, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + } + }, + [SAA7134_BOARD_AVERMEDIA_A700_PRO] = { + /* Matthias Schwarzott <zzam@gentoo.org> */ + .name = "Avermedia DVB-S Pro A700", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* no DVB support for now */ + /* .mpeg = SAA7134_MPEG_DVB, */ + .inputs = { { + .name = name_comp, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_AVERMEDIA_A700_HYBRID] = { + /* Matthias Schwarzott <zzam@gentoo.org> */ + .name = "Avermedia DVB-S Hybrid+FM A700", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, /* TUNER_XC2028 */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* no DVB support for now */ + /* .mpeg = SAA7134_MPEG_DVB, */ + .inputs = { { + .name = name_comp, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_BEHOLD_H6] = { + /* Igor Kuznetsov <igk@igk.ru> */ + .name = "Beholder BeholdTV H6", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + /* no DVB support for now */ + /* .mpeg = SAA7134_MPEG_DVB, */ + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -4224,6 +4509,18 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_MD2819, },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa7a1, + .driver_data = SAA7134_BOARD_AVERMEDIA_A700_PRO, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa7a2, + .driver_data = SAA7134_BOARD_AVERMEDIA_A700_HYBRID, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = 0x1461, /* Avermedia Technologies Inc */ .subdevice = 0x2115, @@ -4930,6 +5227,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x5ace, .subdevice = 0x6193, .driver_data = SAA7134_BOARD_BEHOLD_M6, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6191, + .driver_data = SAA7134_BOARD_BEHOLD_M6, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, @@ -4942,7 +5245,49 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x1822, /*Twinhan Technology Co. Ltd*/ .subdevice = 0x0022, .driver_data = SAA7134_BOARD_TWINHAN_DTV_DVB_3056, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x16be, + .subdevice = 0x0010, /* Medion version CTX953_V.1.4.3 */ + .driver_data = SAA7134_BOARD_CREATIX_CTX953, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1462, /* MSI */ + .subdevice = 0x8625, /* TV@nywhere A/D v1.1 */ + .driver_data = SAA7134_BOARD_MSI_TVANYWHERE_AD11, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf436, + .driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS_506, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf936, + .driver_data = SAA7134_BOARD_AVERMEDIA_A16D, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa836, + .driver_data = SAA7134_BOARD_AVERMEDIA_M115, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x185b, + .subdevice = 0xc900, + .driver_data = SAA7134_BOARD_VIDEOMATE_T750, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6290, + .driver_data = SAA7134_BOARD_BEHOLD_H6, + }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -4998,6 +5343,76 @@ static void board_flyvideo(struct saa7134_dev *dev) dev->name, dev->name, dev->name); } +static int saa7134_xc2028_callback(struct saa7134_dev *dev, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000); + switch (dev->board) { + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); + break; + } + return 0; + } + return -EINVAL; +} + + +static int saa7134_tda8290_callback(struct saa7134_dev *dev, + int command, int arg) +{ + u8 sync_control; + + switch (command) { + case 0: /* switch LNA gain through GPIO 22*/ + saa7134_set_gpio(dev, 22, arg) ; + break; + case 1: /* vsync output at GPIO22. 50 / 60Hz */ + saa_andorb(SAA7134_VIDEO_PORT_CTRL3, 0x80, 0x80); + saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x03); + if (arg == 1) + sync_control = 11; + else + sync_control = 17; + saa_writeb(SAA7134_VGATE_START, sync_control); + saa_writeb(SAA7134_VGATE_STOP, sync_control + 1); + saa_andorb(SAA7134_MISC_VGATE_MSB, 0x03, 0x00); + break; + default: + return -EINVAL; + } + + return 0; +} + +int saa7134_tuner_callback(void *priv, int command, int arg) +{ + struct saa7134_dev *dev = priv; + if (dev != NULL) { + switch (dev->tuner_type) { + case TUNER_PHILIPS_TDA8290: + return saa7134_tda8290_callback(dev, command, arg); + case TUNER_XC2028: + return saa7134_xc2028_callback(dev, command, arg); + } + } else { + printk(KERN_ERR "saa7134: Error - device struct undefined.\n"); + return -EINVAL; + } + return -EINVAL; +} +EXPORT_SYMBOL(saa7134_tuner_callback); + /* ----------------------------------------------------------- */ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data) @@ -5067,6 +5482,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_VIDEOMATE_DVBT_300: case SAA7134_BOARD_VIDEOMATE_DVBT_200: case SAA7134_BOARD_VIDEOMATE_DVBT_200A: + case SAA7134_BOARD_VIDEOMATE_T750: case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: case SAA7134_BOARD_BEHOLD_409FM: @@ -5133,11 +5549,39 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000); break; case SAA7134_BOARD_AVERMEDIA_CARDBUS: - case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + case SAA7134_BOARD_AVERMEDIA_M115: + /* power-down tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0); + msleep(10); /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff); + msleep(10); + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); msleep(1); + dev->has_remote = SAA7134_REMOTE_GPIO; + break; + case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + /* power-down tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x000A8004, 0); + msleep(10); + /* power-up tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x000A8004, 0x000A8004); + msleep(10); + /* remote via GPIO */ + dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_RTD_VFG7350: @@ -5160,7 +5604,6 @@ int saa7134_board_init1(struct saa7134_dev *dev) dev->has_remote = SAA7134_REMOTE_I2C; break; case SAA7134_BOARD_AVERMEDIA_A169_B: - case SAA7134_BOARD_MD7134_BRIDGE_2: printk("%s: %s: dual saa713x broadcast decoders\n" "%s: Sorry, none of the inputs to this chip are supported yet.\n" "%s: Dual decoder functionality is disabled for now, use the other chip.\n", @@ -5172,24 +5615,102 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x8c040007, 0x8c040007); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0c0007cd, 0x0c0007cd); break; + case SAA7134_BOARD_AVERMEDIA_A700_PRO: + case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: + /* write windows gpio values */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100); + printk("%s: %s: hybrid analog/dvb card\n" + "%s: Sorry, only analog s-video and composite input " + "are supported for now.\n", + dev->name, card(dev).name, dev->name); + break; } return 0; } +static void saa7134_tuner_setup(struct saa7134_dev *dev) +{ + struct tuner_setup tun_setup; + unsigned int mode_mask = T_RADIO | + T_ANALOG_TV | + T_DIGITAL_TV; + + memset(&tun_setup, 0, sizeof(tun_setup)); + tun_setup.tuner_callback = saa7134_tuner_callback; + + if (saa7134_boards[dev->board].radio_type != UNSET) { + tun_setup.type = saa7134_boards[dev->board].radio_type; + tun_setup.addr = saa7134_boards[dev->board].radio_addr; + + tun_setup.mode_mask = T_RADIO; + + saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup); + mode_mask &= ~T_RADIO; + } + + if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type != UNSET)) { + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + tun_setup.config = saa7134_boards[dev->board].tuner_config; + tun_setup.tuner_callback = saa7134_tuner_callback; + + tun_setup.mode_mask = mode_mask; + + saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup); + } + + if (dev->tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &dev->tda9887_conf; + + saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, + &tda9887_cfg); + } + + if (dev->tuner_type == TUNER_XC2028) { + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; + + memset(&xc2028_cfg, 0, sizeof(ctl)); + memset(&ctl, 0, sizeof(ctl)); + + ctl.fname = XC2028_DEFAULT_FIRMWARE; + ctl.max_len = 64; + + switch (dev->board) { + case SAA7134_BOARD_AVERMEDIA_A16D: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + ctl.demod = XC3028_FE_ZARLINK456; + break; + default: + ctl.demod = XC3028_FE_OREN538; + ctl.mts = 1; + } + + xc2028_cfg.tuner = TUNER_XC2028; + xc2028_cfg.priv = &ctl; + + saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg); + } +} + /* stuff which needs working i2c */ int saa7134_board_init2(struct saa7134_dev *dev) { unsigned char buf; int board; - struct tuner_setup tun_setup; - tun_setup.config = 0; - tun_setup.tuner_callback = saa7134_tuner_callback; + + dev->tuner_type = saa7134_boards[dev->board].tuner_type; + dev->tuner_addr = saa7134_boards[dev->board].tuner_addr; switch (dev->board) { case SAA7134_BOARD_BMK_MPEX_NOTUNER: case SAA7134_BOARD_BMK_MPEX_TUNER: dev->i2c_client.addr = 0x60; - board = (i2c_master_recv(&dev->i2c_client,&buf,0) < 0) + board = (i2c_master_recv(&dev->i2c_client, &buf, 0) < 0) ? SAA7134_BOARD_BMK_MPEX_NOTUNER : SAA7134_BOARD_BMK_MPEX_TUNER; if (board == dev->board) @@ -5199,16 +5720,9 @@ int saa7134_board_init2(struct saa7134_dev *dev) saa7134_boards[dev->board].name); dev->tuner_type = saa7134_boards[dev->board].tuner_type; - if (TUNER_ABSENT != dev->tuner_type) { - tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV; - tun_setup.type = dev->tuner_type; - tun_setup.addr = ADDR_UNSET; - - saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR, &tun_setup); - } break; case SAA7134_BOARD_MD7134: - { + { u8 subaddr; u8 data[3]; int ret, tuner_t; @@ -5261,67 +5775,56 @@ int saa7134_board_init2(struct saa7134_dev *dev) } printk(KERN_INFO "%s Tuner type is %d\n", dev->name, dev->tuner_type); - if (dev->tuner_type == TUNER_PHILIPS_FMD1216ME_MK3) { - struct v4l2_priv_tun_config tda9887_cfg; - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &dev->tda9887_conf; - - dev->tda9887_conf = TDA9887_PRESENT | - TDA9887_PORT1_ACTIVE | - TDA9887_PORT2_ACTIVE; - - saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, - &tda9887_cfg); - } - - tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV; - tun_setup.type = dev->tuner_type; - tun_setup.addr = ADDR_UNSET; - - saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup); - } break; + } case SAA7134_BOARD_PHILIPS_EUROPA: + if (dev->autodetected && (dev->eedata[0x41] == 0x1c)) { + /* Reconfigure board as Snake reference design */ + dev->board = SAA7134_BOARD_PHILIPS_SNAKE; + dev->tuner_type = saa7134_boards[dev->board].tuner_type; + printk(KERN_INFO "%s: Reconfigured board as %s\n", + dev->name, saa7134_boards[dev->board].name); + break; + } case SAA7134_BOARD_VIDEOMATE_DVBT_300: case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: + { + /* The Philips EUROPA based hybrid boards have the tuner connected through * the channel decoder. We have to make it transparent to find it */ - { u8 data[] = { 0x07, 0x02}; struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; i2c_transfer(&dev->i2c_adap, &msg, 1); - tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; - tun_setup.type = dev->tuner_type; - tun_setup.addr = dev->tuner_addr; - - saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup); - } break; + } case SAA7134_BOARD_PHILIPS_TIGER: case SAA7134_BOARD_PHILIPS_TIGER_S: - { + { u8 data[] = { 0x3c, 0x33, 0x60}; struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; - if(dev->autodetected && (dev->eedata[0x49] == 0x50)) { + if (dev->autodetected && (dev->eedata[0x49] == 0x50)) { dev->board = SAA7134_BOARD_PHILIPS_TIGER_S; printk(KERN_INFO "%s: Reconfigured board as %s\n", dev->name, saa7134_boards[dev->board].name); } - if(dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) { - tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; - tun_setup.type = TUNER_PHILIPS_TDA8290; - tun_setup.addr = 0x4b; - tun_setup.config = 2; + if (dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) { + dev->tuner_type = TUNER_PHILIPS_TDA8290; + + saa7134_tuner_setup(dev); - saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup); data[2] = 0x68; + i2c_transfer(&dev->i2c_adap, &msg, 1); + + /* Tuner setup is handled before I2C transfer. + Due to that, there's no need to do it later + */ + return 0; } i2c_transfer(&dev->i2c_adap, &msg, 1); - } break; + } case SAA7134_BOARD_HAUPPAUGE_HVR1110: hauppauge_eeprom(dev, dev->eedata+0x80); /* break intentionally omitted */ @@ -5333,52 +5836,56 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_MEDION_MD8800_QUADRO: case SAA7134_BOARD_AVERMEDIA_SUPER_007: case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: + case SAA7134_BOARD_CREATIX_CTX953: + { /* this is a hybrid board, initialize to analog mode * and configure firmware eeprom address */ - { u8 data[] = { 0x3c, 0x33, 0x60}; struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; i2c_transfer(&dev->i2c_adap, &msg, 1); - } break; + } case SAA7134_BOARD_FLYDVB_TRIO: - { + { u8 data[] = { 0x3c, 0x33, 0x62}; struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)}; i2c_transfer(&dev->i2c_adap, &msg, 1); - } break; + } case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: + { /* initialize analog mode */ - { u8 data[] = { 0x3c, 0x33, 0x6a}; struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; i2c_transfer(&dev->i2c_adap, &msg, 1); - } break; + } case SAA7134_BOARD_CINERGY_HT_PCMCIA: case SAA7134_BOARD_CINERGY_HT_PCI: + { /* initialize analog mode */ - { u8 data[] = { 0x3c, 0x33, 0x68}; struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; i2c_transfer(&dev->i2c_adap, &msg, 1); - } break; + } case SAA7134_BOARD_KWORLD_ATSC110: - { - /* enable tuner */ - int i; - static const u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 }; - dev->i2c_client.addr = 0x0a; - for (i = 0; i < 5; i++) - if (2 != i2c_master_send(&dev->i2c_client,&buffer[i*2],2)) - printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n", - dev->name, i); - } + { + /* enable tuner */ + int i; + static const u8 buffer [] = { 0x10, 0x12, 0x13, 0x04, 0x16, + 0x00, 0x14, 0x04, 0x17, 0x00 }; + dev->i2c_client.addr = 0x0a; + for (i = 0; i < 5; i++) + if (2 != i2c_master_send(&dev->i2c_client, + &buffer[i*2], 2)) + printk(KERN_WARNING + "%s: Unable to enable tuner(%i).\n", + dev->name, i); break; + } case SAA7134_BOARD_VIDEOMATE_DVBT_200: case SAA7134_BOARD_VIDEOMATE_DVBT_200A: /* The T200 and the T200A share the same pci id. Consequently, @@ -5402,13 +5909,23 @@ int saa7134_board_init2(struct saa7134_dev *dev) break; } break; + case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + { + struct v4l2_priv_tun_config tea5767_cfg; + struct tea5767_ctrl ctl; + + dev->i2c_client.addr = 0xC0; + /* set TEA5767(analog FM) defines */ + memset(&ctl, 0, sizeof(ctl)); + ctl.xtal_freq = TEA5767_HIGH_LO_13MHz; + tea5767_cfg.tuner = TUNER_TEA5767; + tea5767_cfg.priv = &ctl; + saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tea5767_cfg); + break; } + } /* switch() */ + + saa7134_tuner_setup(dev); + return 0; } - -/* ----------------------------------------------------------- */ -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 58ab163fdbd..2c19cd0113c 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -42,23 +42,23 @@ MODULE_LICENSE("GPL"); /* ------------------------------------------------------------------ */ -static unsigned int irq_debug = 0; +static unsigned int irq_debug; module_param(irq_debug, int, 0644); MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]"); -static unsigned int core_debug = 0; +static unsigned int core_debug; module_param(core_debug, int, 0644); MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); -static unsigned int gpio_tracking = 0; +static unsigned int gpio_tracking; module_param(gpio_tracking, int, 0644); MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]"); -static unsigned int alsa = 0; +static unsigned int alsa; module_param(alsa, int, 0644); MODULE_PARM_DESC(alsa,"enable ALSA DMA sound [dmasound]"); -static unsigned int oss = 0; +static unsigned int oss; module_param(oss, int, 0644); MODULE_PARM_DESC(oss,"enable OSS DMA sound [dmasound]"); @@ -142,39 +142,6 @@ void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value) } } -int saa7134_tuner_callback(void *ptr, int command, int arg) -{ - u8 sync_control; - struct saa7134_dev *dev = ptr; - - switch (dev->tuner_type) { - case TUNER_PHILIPS_TDA8290: - switch (command) { - case 0: /* switch LNA gain through GPIO 22*/ - saa7134_set_gpio(dev, 22, arg) ; - break; - case 1: /* vsync output at GPIO22. 50 / 60Hz */ - dprintk("setting GPIO22 to vsync %d\n", arg); - saa_andorb(SAA7134_VIDEO_PORT_CTRL3, 0x80, 0x80); - saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x03); - if (arg == 1) - sync_control = 11; - else - sync_control = 17; - saa_writeb(SAA7134_VGATE_START, sync_control); - saa_writeb(SAA7134_VGATE_STOP, sync_control + 1); - saa_andorb(SAA7134_MISC_VGATE_MSB, 0x03, 0x00); - break; - default: - return -EINVAL; - } - break; - default: - return -ENODEV; - } - return 0; -} - /* ------------------------------------------------------------------ */ @@ -898,6 +865,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, struct saa7134_mpeg_ops *mops; int err; + if (saa7134_devcount == SAA7134_MAXBOARDS) + return -ENOMEM; + dev = kzalloc(sizeof(*dev),GFP_KERNEL); if (NULL == dev) return -ENOMEM; diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index ea2be9eceeb..341b101b035 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -33,33 +33,40 @@ #include "saa7134.h" #include <media/v4l2-common.h> #include "dvb-pll.h" +#include <dvb_frontend.h> #include "mt352.h" #include "mt352_priv.h" /* FIXME */ #include "tda1004x.h" #include "nxt200x.h" +#include "tuner-xc2028.h" #include "tda10086.h" #include "tda826x.h" #include "tda827x.h" #include "isl6421.h" +#include "isl6405.h" +#include "lnbp21.h" +#include "tuner-simple.h" MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); -static unsigned int antenna_pwr = 0; +static unsigned int antenna_pwr; module_param(antenna_pwr, int, 0444); MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); -static int use_frontend = 0; +static int use_frontend; module_param(use_frontend, int, 0644); MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off)."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define dprintk(fmt, arg...) do { if (debug) \ printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0) @@ -91,7 +98,7 @@ static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); udelay(10); ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); - dprintk("%s %s\n", __FUNCTION__, ok ? "on" : "off"); + dprintk("%s %s\n", __func__, ok ? "on" : "off"); if (!ok) saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); @@ -111,7 +118,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; struct saa7134_dev *dev= fe->dvb->priv; - dprintk("%s called\n", __FUNCTION__); + dprintk("%s called\n", __func__); mt352_write(fe, clock_config, sizeof(clock_config)); udelay(200); @@ -146,6 +153,23 @@ static int mt352_aver777_init(struct dvb_frontend* fe) return 0; } +static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0xe }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + return 0; +} + static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { @@ -188,6 +212,12 @@ static struct mt352_config avermedia_777 = { .demod_init = mt352_aver777_init, }; +static struct mt352_config avermedia_xc3028_mt352_dev = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .demod_init = mt352_avermedia_xc3028_init, +}; + /* ================================================================== * tda1004x based DVB-T cards, helper functions */ @@ -430,8 +460,6 @@ static struct tda1004x_config philips_europa_config = { .request_firmware = philips_tda1004x_request_firmware }; -/* ------------------------------------------------------------------ */ - static struct tda1004x_config medion_cardbus = { .demod_address = 0x08, .invert = 1, @@ -447,47 +475,6 @@ static struct tda1004x_config medion_cardbus = { * tda 1004x based cards with philips silicon tuner */ -static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high) -{ - struct saa7134_dev *dev = fe->dvb->priv; - struct tda1004x_state *state = fe->demodulator_priv; - u8 addr = state->config->i2c_gate; - u8 config = state->config->tuner_config; - u8 GP00_CF[] = {0x20, 0x01}; - u8 GP00_LEV[] = {0x22, 0x00}; - - struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = GP00_CF, .len = 2}; - if (config) { - if (high) { - dprintk("setting LNA to high gain\n"); - } else { - dprintk("setting LNA to low gain\n"); - } - } - switch (config) { - case 0: /* no LNA */ - break; - case 1: /* switch is GPIO 0 of tda8290 */ - case 2: - /* turn Vsync off */ - saa7134_set_gpio(dev, 22, 0); - GP00_LEV[1] = high ? 0 : 1; - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { - wprintk("could not access tda8290 at addr: 0x%02x\n", - addr << 1); - return; - } - msg.buf = GP00_LEV; - if (config == 2) - GP00_LEV[1] = high ? 1 : 0; - i2c_transfer(&dev->i2c_adap, &msg, 1); - break; - case 3: /* switch with GPIO of saa713x */ - saa7134_set_gpio(dev, 22, high); - break; - } -} - static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) { struct tda1004x_state *state = fe->demodulator_priv; @@ -510,8 +497,6 @@ static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) return 0; } -/* ------------------------------------------------------------------ */ - static int philips_tda827x_tuner_init(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; @@ -546,28 +531,61 @@ static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) return 0; } -static struct tda827x_config tda827x_cfg = { - .lna_gain = philips_tda827x_lna_gain, - .init = philips_tda827x_tuner_init, - .sleep = philips_tda827x_tuner_sleep -}; - -static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *tda_conf) +static int configure_tda827x_fe(struct saa7134_dev *dev, + struct tda1004x_config *cdec_conf, + struct tda827x_config *tuner_conf) { - dev->dvb.frontend = dvb_attach(tda10046_attach, tda_conf, &dev->i2c_adap); + dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); if (dev->dvb.frontend) { - if (tda_conf->i2c_gate) + if (cdec_conf->i2c_gate) dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; - if (dvb_attach(tda827x_attach, dev->dvb.frontend, tda_conf->tuner_address, - &dev->i2c_adap,&tda827x_cfg) == NULL) { - wprintk("no tda827x tuner found at addr: %02x\n", - tda_conf->tuner_address); - } + if (dvb_attach(tda827x_attach, dev->dvb.frontend, + cdec_conf->tuner_address, + &dev->i2c_adap, tuner_conf)) + return 0; + + wprintk("no tda827x tuner found at addr: %02x\n", + cdec_conf->tuner_address); } + return -EINVAL; } /* ------------------------------------------------------------------ */ +static struct tda827x_config tda827x_cfg_0 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 0, + .switch_addr = 0 +}; + +static struct tda827x_config tda827x_cfg_1 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 1, + .switch_addr = 0x4b +}; + +static struct tda827x_config tda827x_cfg_2 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 2, + .switch_addr = 0x4b +}; + +static struct tda827x_config tda827x_cfg_2_sw42 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 2, + .switch_addr = 0x42 +}; + +/* ------------------------------------------------------------------ */ + static struct tda1004x_config tda827x_lifeview_config = { .demod_address = 0x08, .invert = 1, @@ -590,7 +608,6 @@ static struct tda1004x_config philips_tiger_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 0, .antenna_switch= 1, .request_firmware = philips_tda1004x_request_firmware }; @@ -605,7 +622,6 @@ static struct tda1004x_config cinergy_ht_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 0, .request_firmware = philips_tda1004x_request_firmware }; @@ -619,7 +635,6 @@ static struct tda1004x_config cinergy_ht_pci_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x60, - .tuner_config = 0, .request_firmware = philips_tda1004x_request_firmware }; @@ -633,7 +648,6 @@ static struct tda1004x_config philips_tiger_s_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 2, .antenna_switch= 1, .request_firmware = philips_tda1004x_request_firmware }; @@ -648,7 +662,6 @@ static struct tda1004x_config pinnacle_pctv_310i_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 1, .request_firmware = philips_tda1004x_request_firmware }; @@ -662,7 +675,6 @@ static struct tda1004x_config hauppauge_hvr_1110_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 1, .request_firmware = philips_tda1004x_request_firmware }; @@ -676,7 +688,6 @@ static struct tda1004x_config asus_p7131_dual_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 0, .antenna_switch= 2, .request_firmware = philips_tda1004x_request_firmware }; @@ -715,7 +726,6 @@ static struct tda1004x_config md8800_dvbt_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x60, - .tuner_config = 0, .request_firmware = philips_tda1004x_request_firmware }; @@ -729,7 +739,6 @@ static struct tda1004x_config asus_p7131_4871_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 2, .antenna_switch= 2, .request_firmware = philips_tda1004x_request_firmware }; @@ -744,7 +753,6 @@ static struct tda1004x_config asus_p7131_hybrid_lna_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 2, .antenna_switch= 2, .request_firmware = philips_tda1004x_request_firmware }; @@ -759,7 +767,6 @@ static struct tda1004x_config kworld_dvb_t_210_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, - .tuner_config = 2, .antenna_switch= 1, .request_firmware = philips_tda1004x_request_firmware }; @@ -774,7 +781,6 @@ static struct tda1004x_config avermedia_super_007_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x60, - .tuner_config = 0, .antenna_switch= 1, .request_firmware = philips_tda1004x_request_firmware }; @@ -789,7 +795,6 @@ static struct tda1004x_config twinhan_dtv_dvb_3056_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x42, .tuner_address = 0x61, - .tuner_config = 2, .antenna_switch = 1, .request_firmware = philips_tda1004x_request_firmware }; @@ -817,9 +822,10 @@ static int ads_duo_tuner_sleep(struct dvb_frontend *fe) } static struct tda827x_config ads_duo_cfg = { - .lna_gain = philips_tda827x_lna_gain, + .tuner_callback = saa7134_tuner_callback, .init = ads_duo_tuner_init, - .sleep = ads_duo_tuner_sleep + .sleep = ads_duo_tuner_sleep, + .config = 0 }; static struct tda1004x_config ads_tech_duo_config = { @@ -842,8 +848,73 @@ static struct tda10086_config flydvbs = { .demod_address = 0x0e, .invert = 0, .diseqc_tone = 0, + .xtal_freq = TDA10086_XTAL_16M, }; +static struct tda10086_config sd1878_4m = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 0, + .xtal_freq = TDA10086_XTAL_4M, +}; + +/* ------------------------------------------------------------------ + * special case: lnb supply is connected to the gated i2c + */ + +static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + int res = -EIO; + struct saa7134_dev *dev = fe->dvb->priv; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + if (dev->original_set_voltage) + res = dev->original_set_voltage(fe, voltage); + fe->ops.i2c_gate_ctrl(fe, 0); + } + return res; +}; + +static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) +{ + int res = -EIO; + struct saa7134_dev *dev = fe->dvb->priv; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + if (dev->original_set_high_voltage) + res = dev->original_set_high_voltage(fe, arg); + fe->ops.i2c_gate_ctrl(fe, 0); + } + return res; +}; + +static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct saa7134_dev *dev = fe->dvb->priv; + u8 wbuf[2] = { 0x1f, 00 }; + u8 rbuf; + struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, + { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; + + if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) + return -EIO; + /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ + if (voltage == SEC_VOLTAGE_18) + wbuf[1] = rbuf | 0x10; + else + wbuf[1] = rbuf & 0xef; + msg[0].len = 2; + i2c_transfer(&dev->i2c_adap, msg, 1); + return 0; +} + +static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) +{ + struct saa7134_dev *dev = fe->dvb->priv; + wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__); + return -EIO; +} + /* ================================================================== * nxt200x based ATSC cards, helper functions */ @@ -863,12 +934,14 @@ static struct nxt200x_config kworldatsc110 = { static int dvb_init(struct saa7134_dev *dev) { int ret; + int attach_xc3028 = 0; + /* init struct videobuf_dvb */ dev->ts.nr_bufs = 32; dev->ts.nr_packets = 32*4; dev->dvb.name = dev->name; - videobuf_queue_pci_init(&dev->dvb.dvbq, &saa7134_ts_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&dev->dvb.dvbq, &saa7134_ts_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_ALTERNATE, sizeof(struct saa7134_buf), @@ -889,17 +962,26 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, &dev->i2c_adap); if (dev->dvb.frontend) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - NULL, DVB_PLL_PHILIPS_TD1316); + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, 0x61, + TUNER_PHILIPS_TD1316); } break; + case SAA7134_BOARD_AVERMEDIA_A16D: + dprintk("AverMedia A16D dvb setup\n"); + dev->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); + attach_xc3028 = 1; + break; case SAA7134_BOARD_MD7134: dev->dvb.frontend = dvb_attach(tda10046_attach, &medion_cardbus, &dev->i2c_adap); if (dev->dvb.frontend) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address, - &dev->i2c_adap, DVB_PLL_FMD1216ME); + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, medion_cardbus.tuner_address, + TUNER_PHILIPS_FMD1216ME_MK3); } break; case SAA7134_BOARD_PHILIPS_TOUGH: @@ -913,7 +995,9 @@ static int dvb_init(struct saa7134_dev *dev) break; case SAA7134_BOARD_FLYDVBTDUO: case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: - configure_tda827x_fe(dev, &tda827x_lifeview_config); + if (configure_tda827x_fe(dev, &tda827x_lifeview_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_EUROPA: case SAA7134_BOARD_VIDEOMATE_DVBT_300: @@ -938,36 +1022,52 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_KWORLD_DVBT_210: - configure_tda827x_fe(dev, &kworld_dvb_t_210_config); + if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_TIGER: - configure_tda827x_fe(dev, &philips_tiger_config); + if (configure_tda827x_fe(dev, &philips_tiger_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PINNACLE_PCTV_310i: - configure_tda827x_fe(dev, &pinnacle_pctv_310i_config); + if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, + &tda827x_cfg_1) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: - configure_tda827x_fe(dev, &hauppauge_hvr_1110_config); + if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, + &tda827x_cfg_1) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_ASUSTeK_P7131_DUAL: - configure_tda827x_fe(dev, &asus_p7131_dual_config); + if (configure_tda827x_fe(dev, &asus_p7131_dual_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_FLYDVBT_LR301: - configure_tda827x_fe(dev, &tda827x_lifeview_config); + if (configure_tda827x_fe(dev, &tda827x_lifeview_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_FLYDVB_TRIO: - if(! use_frontend) { /* terrestrial */ - configure_tda827x_fe(dev, &lifeview_trio_config); - } else { /* satellite */ + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &lifeview_trio_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; + } else { /* satellite */ dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, &dev->i2c_adap, 0) == NULL) { - wprintk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__); + wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); + goto dettach_frontend; } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__); + wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); + goto dettach_frontend; } } } @@ -979,34 +1079,81 @@ static int dvb_init(struct saa7134_dev *dev) &dev->i2c_adap); if (dev->dvb.frontend) { if (dvb_attach(tda827x_attach,dev->dvb.frontend, - ads_tech_duo_config.tuner_address, - &dev->i2c_adap,&ads_duo_cfg) == NULL) { + ads_tech_duo_config.tuner_address, &dev->i2c_adap, + &ads_duo_cfg) == NULL) { wprintk("no tda827x tuner found at addr: %02x\n", ads_tech_duo_config.tuner_address); + goto dettach_frontend; } - } + } else + wprintk("failed to attach tda10046\n"); break; case SAA7134_BOARD_TEVION_DVBT_220RF: - configure_tda827x_fe(dev, &tevion_dvbt220rf_config); + if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_MEDION_MD8800_QUADRO: - configure_tda827x_fe(dev, &md8800_dvbt_config); + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &md8800_dvbt_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; + } else { /* satellite */ + dev->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (dev->dvb.frontend) { + struct dvb_frontend *fe = dev->dvb.frontend; + u8 dev_id = dev->eedata[2]; + u8 data = 0xc4; + struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; + + if (dvb_attach(tda826x_attach, dev->dvb.frontend, + 0x60, &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Medion Quadro, no tda826x " + "found !\n", __func__); + goto dettach_frontend; + } + if (dev_id != 0x08) { + /* we need to open the i2c gate (we know it exists) */ + fe->ops.i2c_gate_ctrl(fe, 1); + if (dvb_attach(isl6405_attach, fe, + &dev->i2c_adap, 0x08, 0, 0) == NULL) { + wprintk("%s: Medion Quadro, no ISL6405 " + "found !\n", __func__); + goto dettach_frontend; + } + if (dev_id == 0x07) { + /* fire up the 2nd section of the LNB supply since + we can't do this from the other section */ + msg.buf = &data; + i2c_transfer(&dev->i2c_adap, &msg, 1); + } + fe->ops.i2c_gate_ctrl(fe, 0); + dev->original_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = md8800_set_voltage; + dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + } else { + fe->ops.set_voltage = md8800_set_voltage2; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; + } + } + } break; case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, &dev->i2c_adap); - if (dev->dvb.frontend) { + if (dev->dvb.frontend) dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, NULL, DVB_PLL_TDHU2); - } break; case SAA7134_BOARD_KWORLD_ATSC110: dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, &dev->i2c_adap); - if (dev->dvb.frontend) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - NULL, DVB_PLL_TUV1236D); - } + if (dev->dvb.frontend) + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, 0x61, + TUNER_PHILIPS_TUV1236D); break; case SAA7134_BOARD_FLYDVBS_LR300: dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, @@ -1014,11 +1161,13 @@ static int dvb_init(struct saa7134_dev *dev) if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { - wprintk("%s: No tda826x found!\n", __FUNCTION__); + wprintk("%s: No tda826x found!\n", __func__); + goto dettach_frontend; } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - wprintk("%s: No ISL6421 found!\n", __FUNCTION__); + wprintk("%s: No ISL6421 found!\n", __func__); + goto dettach_frontend; } } break; @@ -1030,8 +1179,9 @@ static int dvb_init(struct saa7134_dev *dev) dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; - dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address, - &dev->i2c_adap, DVB_PLL_FMD1216ME); + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, medion_cardbus.tuner_address, + TUNER_PHILIPS_FMD1216ME_MK3); } break; case SAA7134_BOARD_VIDEOMATE_DVBT_200A: @@ -1044,38 +1194,133 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_CINERGY_HT_PCMCIA: - configure_tda827x_fe(dev, &cinergy_ht_config); + if (configure_tda827x_fe(dev, &cinergy_ht_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_CINERGY_HT_PCI: - configure_tda827x_fe(dev, &cinergy_ht_pci_config); + if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_TIGER_S: - configure_tda827x_fe(dev, &philips_tiger_s_config); + if (configure_tda827x_fe(dev, &philips_tiger_s_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_ASUS_P7131_4871: - configure_tda827x_fe(dev, &asus_p7131_4871_config); + if (configure_tda827x_fe(dev, &asus_p7131_4871_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: - configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config); + if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_AVERMEDIA_SUPER_007: - configure_tda827x_fe(dev, &avermedia_super_007_config); + if (configure_tda827x_fe(dev, &avermedia_super_007_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: - configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config); + if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, + &tda827x_cfg_2_sw42) < 0) + goto dettach_frontend; + break; + case SAA7134_BOARD_PHILIPS_SNAKE: + dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: No tda826x found!\n", __func__); + goto dettach_frontend; + } + if (dvb_attach(lnbp21_attach, dev->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) { + wprintk("%s: No lnbp21 found!\n", __func__); + goto dettach_frontend; + } + } + break; + case SAA7134_BOARD_CREATIX_CTX953: + if (configure_tda827x_fe(dev, &md8800_dvbt_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; + break; + case SAA7134_BOARD_MSI_TVANYWHERE_AD11: + if (configure_tda827x_fe(dev, &philips_tiger_s_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + dprintk("AverMedia E506R dvb setup\n"); + saa7134_set_gpio(dev, 25, 0); + msleep(10); + saa7134_set_gpio(dev, 25, 1); + dev->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); + attach_xc3028 = 1; + case SAA7134_BOARD_MD7134_BRIDGE_2: + dev->dvb.frontend = dvb_attach(tda10086_attach, + &sd1878_4m, &dev->i2c_adap); + if (dev->dvb.frontend) { + struct dvb_frontend *fe; + if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, + &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { + wprintk("%s: MD7134 DVB-S, no SD1878 " + "found !\n", __func__); + goto dettach_frontend; + } + /* we need to open the i2c gate (we know it exists) */ + fe = dev->dvb.frontend; + fe->ops.i2c_gate_ctrl(fe, 1); + if (dvb_attach(isl6405_attach, fe, + &dev->i2c_adap, 0x08, 0, 0) == NULL) { + wprintk("%s: MD7134 DVB-S, no ISL6405 " + "found !\n", __func__); + goto dettach_frontend; + } + fe->ops.i2c_gate_ctrl(fe, 0); + dev->original_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = md8800_set_voltage; + dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + } break; default: wprintk("Huh? unknown DVB card?\n"); break; } + if (attach_xc3028) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_adap, + .i2c_addr = 0x61, + }; + + if (!dev->dvb.frontend) + return -1; + + fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc3028 attach failed\n", + dev->name); + goto dettach_frontend; + } + } + if (NULL == dev->dvb.frontend) { printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); return -1; } /* register everything else */ - ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev); + ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev, + adapter_nr); /* this sequence is necessary to make the tda1004x load its firmware * and to enter analog mode of hybrid boards @@ -1089,6 +1334,13 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend); } return ret; + +dettach_frontend: + if (dev->dvb.frontend) + dvb_frontend_detach(dev->dvb.frontend); + dev->dvb.frontend = NULL; + + return -1; } static int dvb_fini(struct saa7134_dev *dev) @@ -1106,9 +1358,22 @@ static int dvb_fini(struct saa7134_dev *dev) /* otherwise we don't detect the tuner on next insmod */ saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tda9887_cfg); + } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { + if ((dev->eedata[2] == 0x07) && use_frontend) { + /* turn off the 2nd lnb supply */ + u8 data = 0x80; + struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; + struct dvb_frontend *fe; + fe = dev->dvb.frontend; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); + fe->ops.i2c_gate_ctrl(fe, 0); + } + } } - - videobuf_dvb_unregister(&dev->dvb); + if (dev->dvb.frontend) + videobuf_dvb_unregister(&dev->dvb); return 0; } diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 3d2ec30de22..3ae71a34082 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -40,7 +40,7 @@ static unsigned int empress_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; module_param_array(empress_nr, int, NULL, 0444); MODULE_PARM_DESC(empress_nr,"ts device number"); -static unsigned int debug = 0; +static unsigned int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug,"enable debug messages"); @@ -110,9 +110,10 @@ static int ts_release(struct inode *inode, struct file *file) { struct saa7134_dev *dev = file->private_data; + mutex_lock(&dev->empress_tsq.vb_lock); + videobuf_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); - dev->empress_users--; /* stop the encoder */ ts_reset_encoder(dev); @@ -121,6 +122,10 @@ static int ts_release(struct inode *inode, struct file *file) saa_writeb(SAA7134_AUDIO_MUTE_CTRL, saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6)); + dev->empress_users--; + + mutex_unlock(&dev->empress_tsq.vb_lock); + return 0; } @@ -163,8 +168,7 @@ ts_mmap(struct file *file, struct vm_area_struct * vma) static int empress_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, @@ -219,8 +223,7 @@ static int empress_enum_fmt_cap(struct file *file, void *priv, static int empress_g_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; saa7134_i2c_call_clients(dev, VIDIOC_G_FMT, f); @@ -233,8 +236,7 @@ static int empress_g_fmt_cap(struct file *file, void *priv, static int empress_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; saa7134_i2c_call_clients(dev, VIDIOC_S_FMT, f); @@ -248,8 +250,7 @@ static int empress_s_fmt_cap(struct file *file, void *priv, static int empress_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_reqbufs(&dev->empress_tsq, p); } @@ -257,24 +258,21 @@ static int empress_reqbufs(struct file *file, void *priv, static int empress_querybuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_querybuf(&dev->empress_tsq, b); } static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_qbuf(&dev->empress_tsq, b); } static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_dqbuf(&dev->empress_tsq, b, file->f_flags & O_NONBLOCK); @@ -283,8 +281,7 @@ static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) static int empress_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_streamon(&dev->empress_tsq); } @@ -292,8 +289,7 @@ static int empress_streamon(struct file *file, void *priv, static int empress_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_streamoff(&dev->empress_tsq); } @@ -301,8 +297,7 @@ static int empress_streamoff(struct file *file, void *priv, static int empress_s_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; /* count == 0 is abused in saa6752hs.c, so that special case is handled here explicitly. */ @@ -321,8 +316,7 @@ static int empress_s_ext_ctrls(struct file *file, void *priv, static int empress_g_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) return -EINVAL; @@ -402,7 +396,7 @@ static int empress_init(struct saa7134_dev *dev) { int err; - dprintk("%s: %s\n",dev->name,__FUNCTION__); + dprintk("%s: %s\n",dev->name,__func__); dev->empress_dev = video_device_alloc(); if (NULL == dev->empress_dev) return -ENOMEM; @@ -427,8 +421,8 @@ static int empress_init(struct saa7134_dev *dev) printk(KERN_INFO "%s: registered device video%d [mpeg]\n", dev->name,dev->empress_dev->minor & 0x1f); - videobuf_queue_pci_init(&dev->empress_tsq, &saa7134_ts_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_ALTERNATE, sizeof(struct saa7134_buf), @@ -440,7 +434,7 @@ static int empress_init(struct saa7134_dev *dev) static int empress_fini(struct saa7134_dev *dev) { - dprintk("%s: %s\n",dev->name,__FUNCTION__); + dprintk("%s: %s\n",dev->name,__func__); if (NULL == dev->empress_dev) return 0; diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index d3322c3018f..d8af3863f2d 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -33,11 +33,11 @@ /* ----------------------------------------------------------- */ -static unsigned int i2c_debug = 0; +static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]"); -static unsigned int i2c_scan = 0; +static unsigned int i2c_scan; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); @@ -140,6 +140,8 @@ static inline int i2c_is_busy(enum i2c_status status) { switch (status) { case BUSY: + case TO_SCL: + case TO_ARB: return true; default: return false; @@ -322,8 +324,6 @@ static u32 functionality(struct i2c_adapter *adap) static int attach_inform(struct i2c_client *client) { struct saa7134_dev *dev = client->adapter->algo_data; - int tuner = dev->tuner_type; - struct tuner_setup tun_setup; d1printk( "%s i2c attach [addr=0x%x,client=%s]\n", client->driver->driver.name, client->addr, client->name); @@ -344,46 +344,6 @@ static int attach_inform(struct i2c_client *client) } } - if (!client->driver->command) - return 0; - - if (saa7134_boards[dev->board].radio_type != UNSET) { - - tun_setup.type = saa7134_boards[dev->board].radio_type; - tun_setup.addr = saa7134_boards[dev->board].radio_addr; - - if ((tun_setup.addr == ADDR_UNSET) || (tun_setup.addr == client->addr)) { - tun_setup.mode_mask = T_RADIO; - - client->driver->command(client, TUNER_SET_TYPE_ADDR, &tun_setup); - } - } - - if (tuner != UNSET) { - tun_setup.type = tuner; - tun_setup.addr = saa7134_boards[dev->board].tuner_addr; - tun_setup.config = saa7134_boards[dev->board].tuner_config; - tun_setup.tuner_callback = saa7134_tuner_callback; - - if ((tun_setup.addr == ADDR_UNSET)||(tun_setup.addr == client->addr)) { - - tun_setup.mode_mask = T_ANALOG_TV; - - client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_setup); - } - - if (tuner == TUNER_TDA9887) { - struct v4l2_priv_tun_config tda9887_cfg; - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &dev->tda9887_conf; - - client->driver->command(client, TUNER_SET_CONFIG, - &tda9887_cfg); - } - } - - return 0; } diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index b4188819782..76e6501d238 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -27,15 +27,15 @@ #include "saa7134-reg.h" #include "saa7134.h" -static unsigned int disable_ir = 0; +static unsigned int disable_ir; module_param(disable_ir, int, 0444); MODULE_PARM_DESC(disable_ir,"disable infrared remote support"); -static unsigned int ir_debug = 0; +static unsigned int ir_debug; module_param(ir_debug, int, 0644); MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); -static int pinnacle_remote = 0; +static int pinnacle_remote; module_param(pinnacle_remote, int, 0644); /* Choose Pinnacle PCTV remote */ MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)"); @@ -323,6 +323,15 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE1, 0x1); saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); break; + case SAA7134_BOARD_AVERMEDIA_A16D: + ir_codes = ir_codes_avermedia_a16d; + mask_keycode = 0x02F200; + mask_keydown = 0x000400; + polling = 50; /* ms */ + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; case SAA7134_BOARD_KWORLD_TERMINATOR: ir_codes = ir_codes_pixelview; mask_keycode = 0x00001f; @@ -331,6 +340,11 @@ int saa7134_input_init1(struct saa7134_dev *dev) break; case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: + ir_codes = ir_codes_manli; + mask_keycode = 0x001f00; + mask_keyup = 0x004000; + polling = 50; /* ms */ + break; case SAA7134_BOARD_BEHOLD_409FM: case SAA7134_BOARD_BEHOLD_401: case SAA7134_BOARD_BEHOLD_403: @@ -343,7 +357,13 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_505FM: case SAA7134_BOARD_BEHOLD_507_9FM: ir_codes = ir_codes_manli; - mask_keycode = 0x001f00; + mask_keycode = 0x003f00; + mask_keyup = 0x004000; + polling = 50; /* ms */ + break; + case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + ir_codes = ir_codes_behold_columbus; + mask_keycode = 0x003f00; mask_keyup = 0x004000; polling = 50; // ms break; @@ -520,6 +540,7 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) break; case SAA7134_BOARD_BEHOLD_607_9FM: case SAA7134_BOARD_BEHOLD_M6: + case SAA7134_BOARD_BEHOLD_H6: snprintf(ir->c.name, sizeof(ir->c.name), "BeholdTV"); ir->get_key = get_key_beholdm6xx; ir->ir_codes = ir_codes_behold; diff --git a/drivers/media/video/saa7134/saa7134-reg.h b/drivers/media/video/saa7134/saa7134-reg.h index ac6431ba4fc..86f5eefdb0f 100644 --- a/drivers/media/video/saa7134/saa7134-reg.h +++ b/drivers/media/video/saa7134/saa7134-reg.h @@ -365,6 +365,9 @@ #define SAA7135_DSP_RWSTATE_RDB (1 << 1) #define SAA7135_DSP_RWSTATE_WRR (1 << 0) +#define SAA7135_DSP_RWCLEAR 0x586 +#define SAA7135_DSP_RWCLEAR_RERR 1 + /* ------------------------------------------------------------------ */ /* * Local variables: diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index f1b8fcaeb43..eae72fd60ce 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -32,7 +32,7 @@ /* ------------------------------------------------------------------ */ -static unsigned int ts_debug = 0; +static unsigned int ts_debug; module_param(ts_debug, int, 0644); MODULE_PARM_DESC(ts_debug,"enable debug messages [ts]"); diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c index 4e9810469ae..232af598d94 100644 --- a/drivers/media/video/saa7134/saa7134-tvaudio.c +++ b/drivers/media/video/saa7134/saa7134-tvaudio.c @@ -35,18 +35,18 @@ /* ------------------------------------------------------------------ */ -static unsigned int audio_debug = 0; +static unsigned int audio_debug; module_param(audio_debug, int, 0644); MODULE_PARM_DESC(audio_debug,"enable debug messages [tv audio]"); -static unsigned int audio_ddep = 0; +static unsigned int audio_ddep; module_param(audio_ddep, int, 0644); MODULE_PARM_DESC(audio_ddep,"audio ddep overwrite"); static int audio_clock_override = UNSET; module_param(audio_clock_override, int, 0644); -static int audio_clock_tweak = 0; +static int audio_clock_tweak; module_param(audio_clock_tweak, int, 0644); MODULE_PARM_DESC(audio_clock_tweak, "Audio clock tick fine tuning for cards with audio crystal that's slightly off (range [-1024 .. 1024])"); @@ -653,6 +653,17 @@ static char *stdres[0x20] = { #define DSP_RETRY 32 #define DSP_DELAY 16 +#define SAA7135_DSP_RWCLEAR_RERR 1 + +static inline int saa_dsp_reset_error_bit(struct saa7134_dev *dev) +{ + int state = saa_readb(SAA7135_DSP_RWSTATE); + if (unlikely(state & SAA7135_DSP_RWSTATE_ERR)) { + d2printk("%s: resetting error bit\n", dev->name); + saa_writeb(SAA7135_DSP_RWCLEAR, SAA7135_DSP_RWCLEAR_RERR); + } + return 0; +} static inline int saa_dsp_wait_bit(struct saa7134_dev *dev, int bit) { @@ -660,8 +671,8 @@ static inline int saa_dsp_wait_bit(struct saa7134_dev *dev, int bit) state = saa_readb(SAA7135_DSP_RWSTATE); if (unlikely(state & SAA7135_DSP_RWSTATE_ERR)) { - printk("%s: dsp access error\n",dev->name); - /* FIXME: send ack ... */ + printk(KERN_WARNING "%s: dsp access error\n", dev->name); + saa_dsp_reset_error_bit(dev); return -EIO; } while (0 == (state & bit)) { diff --git a/drivers/media/video/saa7134/saa7134-vbi.c b/drivers/media/video/saa7134/saa7134-vbi.c index f0d5ed9c2b0..cb0304298a9 100644 --- a/drivers/media/video/saa7134/saa7134-vbi.c +++ b/drivers/media/video/saa7134/saa7134-vbi.c @@ -31,7 +31,7 @@ /* ------------------------------------------------------------------ */ -static unsigned int vbi_debug = 0; +static unsigned int vbi_debug; module_param(vbi_debug, int, 0644); MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]"); diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 39c41ad97d0..48e1a01718e 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -40,7 +40,7 @@ unsigned int video_debug; static unsigned int gbuffers = 8; -static unsigned int noninterlaced = 0; +static unsigned int noninterlaced; /* 0 */ static unsigned int gbufsize = 720*576*4; static unsigned int gbufsize_max = 720*576*4; static char secam[] = "--"; @@ -626,13 +626,8 @@ void saa7134_set_tvnorm_hw(struct saa7134_dev *dev) { saa7134_set_decoder(dev); - if (card_in(dev, dev->ctl_input).tv) { - if ((card(dev).tuner_type == TUNER_PHILIPS_TDA8290) - && ((card(dev).tuner_config == 1) - || (card(dev).tuner_config == 2))) - saa7134_set_gpio(dev, 22, 5); + if (card_in(dev, dev->ctl_input).tv) saa7134_i2c_call_clients(dev, VIDIOC_S_STD, &dev->tvnorm->id); - } } static void set_h_prescale(struct saa7134_dev *dev, int task, int prescale) @@ -1350,14 +1345,14 @@ static int video_open(struct inode *inode, struct file *file) fh->height = 576; v4l2_prio_open(&dev->prio,&fh->prio); - videobuf_queue_pci_init(&fh->cap, &video_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->cap, &video_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct saa7134_buf), fh); - videobuf_queue_pci_init(&fh->vbi, &saa7134_vbi_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&fh->vbi, &saa7134_vbi_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, sizeof(struct saa7134_buf), @@ -1639,7 +1634,7 @@ static int saa7134_s_fmt_overlay(struct file *file, void *priv, struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; int err; - unsigned int flags; + unsigned long flags; if (saa7134_no_overlay > 0) { printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index f940d025479..34ff0d4998f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -253,7 +253,18 @@ struct saa7134_format { #define SAA7134_BOARD_BEHOLD_607_9FM 129 #define SAA7134_BOARD_BEHOLD_M6 130 #define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 131 -#define SAA7134_BOARD_GENIUS_TVGO_A11MCE 132 +#define SAA7134_BOARD_GENIUS_TVGO_A11MCE 132 +#define SAA7134_BOARD_PHILIPS_SNAKE 133 +#define SAA7134_BOARD_CREATIX_CTX953 134 +#define SAA7134_BOARD_MSI_TVANYWHERE_AD11 135 +#define SAA7134_BOARD_AVERMEDIA_CARDBUS_506 136 +#define SAA7134_BOARD_AVERMEDIA_A16D 137 +#define SAA7134_BOARD_AVERMEDIA_M115 138 +#define SAA7134_BOARD_VIDEOMATE_T750 139 +#define SAA7134_BOARD_AVERMEDIA_A700_PRO 140 +#define SAA7134_BOARD_AVERMEDIA_A700_HYBRID 141 +#define SAA7134_BOARD_BEHOLD_H6 142 + #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 @@ -380,9 +391,7 @@ struct saa7134_fh { unsigned int radio; enum v4l2_buf_type type; unsigned int resources; -#ifdef VIDIOC_G_PRIORITY enum v4l2_priority prio; -#endif /* video overlay */ struct v4l2_window win; @@ -454,9 +463,7 @@ struct saa7134_dev { struct list_head devlist; struct mutex lock; spinlock_t slock; -#ifdef VIDIOC_G_PRIORITY struct v4l2_prio_state prio; -#endif /* workstruct for loading modules */ struct work_struct request_module_wk; @@ -556,7 +563,9 @@ struct saa7134_dev { #if defined(CONFIG_VIDEO_SAA7134_DVB) || defined(CONFIG_VIDEO_SAA7134_DVB_MODULE) /* SAA7134_MPEG_DVB only */ struct videobuf_dvb dvb; - int (*original_demod_sleep)(struct dvb_frontend* fe); + int (*original_demod_sleep)(struct dvb_frontend *fe); + int (*original_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); + int (*original_set_high_voltage)(struct dvb_frontend *fe, long arg); #endif }; @@ -594,7 +603,6 @@ extern int saa7134_no_overlay; void saa7134_track_gpio(struct saa7134_dev *dev, char *msg); void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value); -int saa7134_tuner_callback(void *ptr, int command, int arg); #define SAA7134_PGTABLE_SIZE 4096 @@ -631,6 +639,7 @@ extern struct pci_device_id __devinitdata saa7134_pci_tbl[]; extern int saa7134_board_init1(struct saa7134_dev *dev); extern int saa7134_board_init2(struct saa7134_dev *dev); +int saa7134_tuner_callback(void *priv, int command, int arg); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c new file mode 100644 index 00000000000..2220f956994 --- /dev/null +++ b/drivers/media/video/saa717x.c @@ -0,0 +1,1522 @@ +/* + * saa717x - Philips SAA717xHL video decoder driver + * + * Based on the saa7115 driver + * + * Changes by Ohta Kyuma <alpha292@bremen.or.jp> + * - Apply to SAA717x,NEC uPD64031,uPD64083. (1/31/2004) + * + * Changes by T.Adachi (tadachi@tadachi-net.com) + * - support audio, video scaler etc, and checked the initialize sequence. + * + * Cleaned up by Hans Verkuil <hverkuil@xs4all.nl> + * + * Note: this is a reversed engineered driver based on captures from + * the I2C bus under Windows. This chip is very similar to the saa7134, + * though. Unfortunately, this driver is currently only working for NTSC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> + +#include <linux/videodev.h> +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv.h> + +MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver"); +MODULE_AUTHOR("K. Ohta, T. Adachi, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +struct saa717x_state { + v4l2_std_id std; + int input; + int enable; + int radio; + int bright; + int contrast; + int hue; + int sat; + int playback; + int audio; + int tuner_audio_mode; + int audio_main_mute; + int audio_main_vol_r; + int audio_main_vol_l; + u16 audio_main_bass; + u16 audio_main_treble; + u16 audio_main_volume; + u16 audio_main_balance; + int audio_input; +}; + +/* ----------------------------------------------------------------------- */ + +/* for audio mode */ +#define TUNER_AUDIO_MONO 0 /* LL */ +#define TUNER_AUDIO_STEREO 1 /* LR */ +#define TUNER_AUDIO_LANG1 2 /* LL */ +#define TUNER_AUDIO_LANG2 3 /* RR */ + +#define SAA717X_NTSC_WIDTH (704) +#define SAA717X_NTSC_HEIGHT (480) + +/* ----------------------------------------------------------------------- */ + +static int saa717x_write(struct i2c_client *client, u32 reg, u32 value) +{ + struct i2c_adapter *adap = client->adapter; + int fw_addr = reg == 0x454 || (reg >= 0x464 && reg <= 0x478) || reg == 0x480 || reg == 0x488; + unsigned char mm1[6]; + struct i2c_msg msg; + + msg.flags = 0; + msg.addr = client->addr; + mm1[0] = (reg >> 8) & 0xff; + mm1[1] = reg & 0xff; + + if (fw_addr) { + mm1[4] = (value >> 16) & 0xff; + mm1[3] = (value >> 8) & 0xff; + mm1[2] = value & 0xff; + } else { + mm1[2] = value & 0xff; + } + msg.len = fw_addr ? 5 : 3; /* Long Registers have *only* three bytes! */ + msg.buf = mm1; + v4l_dbg(2, debug, client, "wrote: reg 0x%03x=%08x\n", reg, value); + return i2c_transfer(adap, &msg, 1) == 1; +} + +static void saa717x_write_regs(struct i2c_client *client, u32 *data) +{ + while (data[0] || data[1]) { + saa717x_write(client, data[0], data[1]); + data += 2; + } +} + +static u32 saa717x_read(struct i2c_client *client, u32 reg) +{ + struct i2c_adapter *adap = client->adapter; + int fw_addr = (reg >= 0x404 && reg <= 0x4b8) || reg == 0x528; + unsigned char mm1[2]; + unsigned char mm2[4] = { 0, 0, 0, 0 }; + struct i2c_msg msgs[2]; + u32 value; + + msgs[0].flags = 0; + msgs[1].flags = I2C_M_RD; + msgs[0].addr = msgs[1].addr = client->addr; + mm1[0] = (reg >> 8) & 0xff; + mm1[1] = reg & 0xff; + msgs[0].len = 2; + msgs[0].buf = mm1; + msgs[1].len = fw_addr ? 3 : 1; /* Multibyte Registers contains *only* 3 bytes */ + msgs[1].buf = mm2; + i2c_transfer(adap, msgs, 2); + + if (fw_addr) + value = (mm2[2] & 0xff) | ((mm2[1] & 0xff) >> 8) | ((mm2[0] & 0xff) >> 16); + else + value = mm2[0] & 0xff; + + v4l_dbg(2, debug, client, "read: reg 0x%03x=0x%08x\n", reg, value); + return value; +} + +/* ----------------------------------------------------------------------- */ + +static u32 reg_init_initialize[] = +{ + /* from linux driver */ + 0x101, 0x008, /* Increment delay */ + + 0x103, 0x000, /* Analog input control 2 */ + 0x104, 0x090, /* Analog input control 3 */ + 0x105, 0x090, /* Analog input control 4 */ + 0x106, 0x0eb, /* Horizontal sync start */ + 0x107, 0x0e0, /* Horizontal sync stop */ + 0x109, 0x055, /* Luminance control */ + + 0x10f, 0x02a, /* Chroma gain control */ + 0x110, 0x000, /* Chroma control 2 */ + + 0x114, 0x045, /* analog/ADC */ + + 0x118, 0x040, /* RAW data gain */ + 0x119, 0x080, /* RAW data offset */ + + 0x044, 0x000, /* VBI horizontal input window start (L) TASK A */ + 0x045, 0x000, /* VBI horizontal input window start (H) TASK A */ + 0x046, 0x0cf, /* VBI horizontal input window stop (L) TASK A */ + 0x047, 0x002, /* VBI horizontal input window stop (H) TASK A */ + + 0x049, 0x000, /* VBI vertical input window start (H) TASK A */ + + 0x04c, 0x0d0, /* VBI horizontal output length (L) TASK A */ + 0x04d, 0x002, /* VBI horizontal output length (H) TASK A */ + + 0x064, 0x080, /* Lumina brightness TASK A */ + 0x065, 0x040, /* Luminance contrast TASK A */ + 0x066, 0x040, /* Chroma saturation TASK A */ + /* 067H: Reserved */ + 0x068, 0x000, /* VBI horizontal scaling increment (L) TASK A */ + 0x069, 0x004, /* VBI horizontal scaling increment (H) TASK A */ + 0x06a, 0x000, /* VBI phase offset TASK A */ + + 0x06e, 0x000, /* Horizontal phase offset Luma TASK A */ + 0x06f, 0x000, /* Horizontal phase offset Chroma TASK A */ + + 0x072, 0x000, /* Vertical filter mode TASK A */ + + 0x084, 0x000, /* VBI horizontal input window start (L) TAKS B */ + 0x085, 0x000, /* VBI horizontal input window start (H) TAKS B */ + 0x086, 0x0cf, /* VBI horizontal input window stop (L) TAKS B */ + 0x087, 0x002, /* VBI horizontal input window stop (H) TAKS B */ + + 0x089, 0x000, /* VBI vertical input window start (H) TAKS B */ + + 0x08c, 0x0d0, /* VBI horizontal output length (L) TASK B */ + 0x08d, 0x002, /* VBI horizontal output length (H) TASK B */ + + 0x0a4, 0x080, /* Lumina brightness TASK B */ + 0x0a5, 0x040, /* Luminance contrast TASK B */ + 0x0a6, 0x040, /* Chroma saturation TASK B */ + /* 0A7H reserved */ + 0x0a8, 0x000, /* VBI horizontal scaling increment (L) TASK B */ + 0x0a9, 0x004, /* VBI horizontal scaling increment (H) TASK B */ + 0x0aa, 0x000, /* VBI phase offset TASK B */ + + 0x0ae, 0x000, /* Horizontal phase offset Luma TASK B */ + 0x0af, 0x000, /*Horizontal phase offset Chroma TASK B */ + + 0x0b2, 0x000, /* Vertical filter mode TASK B */ + + 0x00c, 0x000, /* Start point GREEN path */ + 0x00d, 0x000, /* Start point BLUE path */ + 0x00e, 0x000, /* Start point RED path */ + + 0x010, 0x010, /* GREEN path gamma curve --- */ + 0x011, 0x020, + 0x012, 0x030, + 0x013, 0x040, + 0x014, 0x050, + 0x015, 0x060, + 0x016, 0x070, + 0x017, 0x080, + 0x018, 0x090, + 0x019, 0x0a0, + 0x01a, 0x0b0, + 0x01b, 0x0c0, + 0x01c, 0x0d0, + 0x01d, 0x0e0, + 0x01e, 0x0f0, + 0x01f, 0x0ff, /* --- GREEN path gamma curve */ + + 0x020, 0x010, /* BLUE path gamma curve --- */ + 0x021, 0x020, + 0x022, 0x030, + 0x023, 0x040, + 0x024, 0x050, + 0x025, 0x060, + 0x026, 0x070, + 0x027, 0x080, + 0x028, 0x090, + 0x029, 0x0a0, + 0x02a, 0x0b0, + 0x02b, 0x0c0, + 0x02c, 0x0d0, + 0x02d, 0x0e0, + 0x02e, 0x0f0, + 0x02f, 0x0ff, /* --- BLUE path gamma curve */ + + 0x030, 0x010, /* RED path gamma curve --- */ + 0x031, 0x020, + 0x032, 0x030, + 0x033, 0x040, + 0x034, 0x050, + 0x035, 0x060, + 0x036, 0x070, + 0x037, 0x080, + 0x038, 0x090, + 0x039, 0x0a0, + 0x03a, 0x0b0, + 0x03b, 0x0c0, + 0x03c, 0x0d0, + 0x03d, 0x0e0, + 0x03e, 0x0f0, + 0x03f, 0x0ff, /* --- RED path gamma curve */ + + 0x109, 0x085, /* Luminance control */ + + /**** from app start ****/ + 0x584, 0x000, /* AGC gain control */ + 0x585, 0x000, /* Program count */ + 0x586, 0x003, /* Status reset */ + 0x588, 0x0ff, /* Number of audio samples (L) */ + 0x589, 0x00f, /* Number of audio samples (M) */ + 0x58a, 0x000, /* Number of audio samples (H) */ + 0x58b, 0x000, /* Audio select */ + 0x58c, 0x010, /* Audio channel assign1 */ + 0x58d, 0x032, /* Audio channel assign2 */ + 0x58e, 0x054, /* Audio channel assign3 */ + 0x58f, 0x023, /* Audio format */ + 0x590, 0x000, /* SIF control */ + + 0x595, 0x000, /* ?? */ + 0x596, 0x000, /* ?? */ + 0x597, 0x000, /* ?? */ + + 0x464, 0x00, /* Digital input crossbar1 */ + + 0x46c, 0xbbbb10, /* Digital output selection1-3 */ + 0x470, 0x101010, /* Digital output selection4-6 */ + + 0x478, 0x00, /* Sound feature control */ + + 0x474, 0x18, /* Softmute control */ + + 0x454, 0x0425b9, /* Sound Easy programming(reset) */ + 0x454, 0x042539, /* Sound Easy programming(reset) */ + + + /**** common setting( of DVD play, including scaler commands) ****/ + 0x042, 0x003, /* Data path configuration for VBI (TASK A) */ + + 0x082, 0x003, /* Data path configuration for VBI (TASK B) */ + + 0x108, 0x0f8, /* Sync control */ + 0x2a9, 0x0fd, /* ??? */ + 0x102, 0x089, /* select video input "mode 9" */ + 0x111, 0x000, /* Mode/delay control */ + + 0x10e, 0x00a, /* Chroma control 1 */ + + 0x594, 0x002, /* SIF, analog I/O select */ + + 0x454, 0x0425b9, /* Sound */ + 0x454, 0x042539, + + 0x111, 0x000, + 0x10e, 0x00a, + 0x464, 0x000, + 0x300, 0x000, + 0x301, 0x006, + 0x302, 0x000, + 0x303, 0x006, + 0x308, 0x040, + 0x309, 0x000, + 0x30a, 0x000, + 0x30b, 0x000, + 0x000, 0x002, + 0x001, 0x000, + 0x002, 0x000, + 0x003, 0x000, + 0x004, 0x033, + 0x040, 0x01d, + 0x041, 0x001, + 0x042, 0x004, + 0x043, 0x000, + 0x080, 0x01e, + 0x081, 0x001, + 0x082, 0x004, + 0x083, 0x000, + 0x190, 0x018, + 0x115, 0x000, + 0x116, 0x012, + 0x117, 0x018, + 0x04a, 0x011, + 0x08a, 0x011, + 0x04b, 0x000, + 0x08b, 0x000, + 0x048, 0x000, + 0x088, 0x000, + 0x04e, 0x012, + 0x08e, 0x012, + 0x058, 0x012, + 0x098, 0x012, + 0x059, 0x000, + 0x099, 0x000, + 0x05a, 0x003, + 0x09a, 0x003, + 0x05b, 0x001, + 0x09b, 0x001, + 0x054, 0x008, + 0x094, 0x008, + 0x055, 0x000, + 0x095, 0x000, + 0x056, 0x0c7, + 0x096, 0x0c7, + 0x057, 0x002, + 0x097, 0x002, + 0x0ff, 0x0ff, + 0x060, 0x001, + 0x0a0, 0x001, + 0x061, 0x000, + 0x0a1, 0x000, + 0x062, 0x000, + 0x0a2, 0x000, + 0x063, 0x000, + 0x0a3, 0x000, + 0x070, 0x000, + 0x0b0, 0x000, + 0x071, 0x004, + 0x0b1, 0x004, + 0x06c, 0x0e9, + 0x0ac, 0x0e9, + 0x06d, 0x003, + 0x0ad, 0x003, + 0x05c, 0x0d0, + 0x09c, 0x0d0, + 0x05d, 0x002, + 0x09d, 0x002, + 0x05e, 0x0f2, + 0x09e, 0x0f2, + 0x05f, 0x000, + 0x09f, 0x000, + 0x074, 0x000, + 0x0b4, 0x000, + 0x075, 0x000, + 0x0b5, 0x000, + 0x076, 0x000, + 0x0b6, 0x000, + 0x077, 0x000, + 0x0b7, 0x000, + 0x195, 0x008, + 0x0ff, 0x0ff, + 0x108, 0x0f8, + 0x111, 0x000, + 0x10e, 0x00a, + 0x2a9, 0x0fd, + 0x464, 0x001, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + + + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x193, 0x000, + 0x300, 0x000, + 0x301, 0x006, + 0x302, 0x000, + 0x303, 0x006, + 0x308, 0x040, + 0x309, 0x000, + 0x30a, 0x000, + 0x30b, 0x000, + 0x000, 0x002, + 0x001, 0x000, + 0x002, 0x000, + 0x003, 0x000, + 0x004, 0x033, + 0x040, 0x01d, + 0x041, 0x001, + 0x042, 0x004, + 0x043, 0x000, + 0x080, 0x01e, + 0x081, 0x001, + 0x082, 0x004, + 0x083, 0x000, + 0x190, 0x018, + 0x115, 0x000, + 0x116, 0x012, + 0x117, 0x018, + 0x04a, 0x011, + 0x08a, 0x011, + 0x04b, 0x000, + 0x08b, 0x000, + 0x048, 0x000, + 0x088, 0x000, + 0x04e, 0x012, + 0x08e, 0x012, + 0x058, 0x012, + 0x098, 0x012, + 0x059, 0x000, + 0x099, 0x000, + 0x05a, 0x003, + 0x09a, 0x003, + 0x05b, 0x001, + 0x09b, 0x001, + 0x054, 0x008, + 0x094, 0x008, + 0x055, 0x000, + 0x095, 0x000, + 0x056, 0x0c7, + 0x096, 0x0c7, + 0x057, 0x002, + 0x097, 0x002, + 0x060, 0x001, + 0x0a0, 0x001, + 0x061, 0x000, + 0x0a1, 0x000, + 0x062, 0x000, + 0x0a2, 0x000, + 0x063, 0x000, + 0x0a3, 0x000, + 0x070, 0x000, + 0x0b0, 0x000, + 0x071, 0x004, + 0x0b1, 0x004, + 0x06c, 0x0e9, + 0x0ac, 0x0e9, + 0x06d, 0x003, + 0x0ad, 0x003, + 0x05c, 0x0d0, + 0x09c, 0x0d0, + 0x05d, 0x002, + 0x09d, 0x002, + 0x05e, 0x0f2, + 0x09e, 0x0f2, + 0x05f, 0x000, + 0x09f, 0x000, + 0x074, 0x000, + 0x0b4, 0x000, + 0x075, 0x000, + 0x0b5, 0x000, + 0x076, 0x000, + 0x0b6, 0x000, + 0x077, 0x000, + 0x0b7, 0x000, + 0x195, 0x008, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x193, 0x0a6, + 0x108, 0x0f8, + 0x042, 0x003, + 0x082, 0x003, + 0x454, 0x0425b9, + 0x454, 0x042539, + 0x193, 0x000, + 0x193, 0x0a6, + 0x464, 0x000, + + 0, 0 +}; + +/* Tuner */ +static u32 reg_init_tuner_input[] = { + 0x108, 0x0f8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x00a, /* Chroma control 1 */ + 0, 0 +}; + +/* Composite */ +static u32 reg_init_composite_input[] = { + 0x108, 0x0e8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x04a, /* Chroma control 1 */ + 0, 0 +}; + +/* S-Video */ +static u32 reg_init_svideo_input[] = { + 0x108, 0x0e8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x04a, /* Chroma control 1 */ + 0, 0 +}; + +static u32 reg_set_audio_template[4][2] = +{ + { /* for MONO + tadachi 6/29 DMA audio output select? + Register 0x46c + 7-4: DMA2, 3-0: DMA1 ch. DMA4, DMA3 DMA2, DMA1 + 0: MAIN left, 1: MAIN right + 2: AUX1 left, 3: AUX1 right + 4: AUX2 left, 5: AUX2 right + 6: DPL left, 7: DPL right + 8: DPL center, 9: DPL surround + A: monitor output, B: digital sense */ + 0xbbbb00, + + /* tadachi 6/29 DAC and I2S output select? + Register 0x470 + 7-4:DAC right ch. 3-0:DAC left ch. + I2S1 right,left I2S2 right,left */ + 0x00, + }, + { /* for STEREO */ + 0xbbbb10, 0x101010, + }, + { /* for LANG1 */ + 0xbbbb00, 0x00, + }, + { /* for LANG2/SAP */ + 0xbbbb11, 0x111111, + } +}; + + +/* Get detected audio flags (from saa7134 driver) */ +static void get_inf_dev_status(struct i2c_client *client, + int *dual_flag, int *stereo_flag) +{ + u32 reg_data3; + + static char *stdres[0x20] = { + [0x00] = "no standard detected", + [0x01] = "B/G (in progress)", + [0x02] = "D/K (in progress)", + [0x03] = "M (in progress)", + + [0x04] = "B/G A2", + [0x05] = "B/G NICAM", + [0x06] = "D/K A2 (1)", + [0x07] = "D/K A2 (2)", + [0x08] = "D/K A2 (3)", + [0x09] = "D/K NICAM", + [0x0a] = "L NICAM", + [0x0b] = "I NICAM", + + [0x0c] = "M Korea", + [0x0d] = "M BTSC ", + [0x0e] = "M EIAJ", + + [0x0f] = "FM radio / IF 10.7 / 50 deemp", + [0x10] = "FM radio / IF 10.7 / 75 deemp", + [0x11] = "FM radio / IF sel / 50 deemp", + [0x12] = "FM radio / IF sel / 75 deemp", + + [0x13 ... 0x1e] = "unknown", + [0x1f] = "??? [in progress]", + }; + + + *dual_flag = *stereo_flag = 0; + + /* (demdec status: 0x528) */ + + /* read current status */ + reg_data3 = saa717x_read(client, 0x0528); + + v4l_dbg(1, debug, client, "tvaudio thread status: 0x%x [%s%s%s]\n", + reg_data3, stdres[reg_data3 & 0x1f], + (reg_data3 & 0x000020) ? ",stereo" : "", + (reg_data3 & 0x000040) ? ",dual" : ""); + v4l_dbg(1, debug, client, "detailed status: " + "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n", + (reg_data3 & 0x000080) ? " A2/EIAJ pilot tone " : "", + (reg_data3 & 0x000100) ? " A2/EIAJ dual " : "", + (reg_data3 & 0x000200) ? " A2/EIAJ stereo " : "", + (reg_data3 & 0x000400) ? " A2/EIAJ noise mute " : "", + + (reg_data3 & 0x000800) ? " BTSC/FM radio pilot " : "", + (reg_data3 & 0x001000) ? " SAP carrier " : "", + (reg_data3 & 0x002000) ? " BTSC stereo noise mute " : "", + (reg_data3 & 0x004000) ? " SAP noise mute " : "", + (reg_data3 & 0x008000) ? " VDSP " : "", + + (reg_data3 & 0x010000) ? " NICST " : "", + (reg_data3 & 0x020000) ? " NICDU " : "", + (reg_data3 & 0x040000) ? " NICAM muted " : "", + (reg_data3 & 0x080000) ? " NICAM reserve sound " : "", + + (reg_data3 & 0x100000) ? " init done " : ""); + + if (reg_data3 & 0x000220) { + v4l_dbg(1, debug, client, "ST!!!\n"); + *stereo_flag = 1; + } + + if (reg_data3 & 0x000140) { + v4l_dbg(1, debug, client, "DUAL!!!\n"); + *dual_flag = 1; + } +} + +/* regs write to set audio mode */ +static void set_audio_mode(struct i2c_client *client, int audio_mode) +{ + v4l_dbg(1, debug, client, "writing registers to set audio mode by set %d\n", + audio_mode); + + saa717x_write(client, 0x46c, reg_set_audio_template[audio_mode][0]); + saa717x_write(client, 0x470, reg_set_audio_template[audio_mode][1]); +} + +/* write regs to video output level (bright,contrast,hue,sat) */ +static void set_video_output_level_regs(struct i2c_client *client, + struct saa717x_state *decoder) +{ + /* brightness ffh (bright) - 80h (ITU level) - 00h (dark) */ + saa717x_write(client, 0x10a, decoder->bright); + + /* contrast 7fh (max: 1.984) - 44h (ITU) - 40h (1.0) - + 0h (luminance off) 40: i2c dump + c0h (-1.0 inverse chrominance) + 80h (-2.0 inverse chrominance) */ + saa717x_write(client, 0x10b, decoder->contrast); + + /* saturation? 7fh(max)-40h(ITU)-0h(color off) + c0h (-1.0 inverse chrominance) + 80h (-2.0 inverse chrominance) */ + saa717x_write(client, 0x10c, decoder->sat); + + /* color hue (phase) control + 7fh (+178.6) - 0h (0 normal) - 80h (-180.0) */ + saa717x_write(client, 0x10d, decoder->hue); +} + +/* write regs to set audio volume, bass and treble */ +static int set_audio_regs(struct i2c_client *client, + struct saa717x_state *decoder) +{ + u8 mute = 0xac; /* -84 dB */ + u32 val; + unsigned int work_l, work_r; + + /* set SIF analog I/O select */ + saa717x_write(client, 0x0594, decoder->audio_input); + v4l_dbg(1, debug, client, "set audio input %d\n", + decoder->audio_input); + + /* normalize ( 65535 to 0 -> 24 to -40 (not -84)) */ + work_l = (min(65536 - decoder->audio_main_balance, 32768) * decoder->audio_main_volume) / 32768; + work_r = (min(decoder->audio_main_balance, (u16)32768) * decoder->audio_main_volume) / 32768; + decoder->audio_main_vol_l = (long)work_l * (24 - (-40)) / 65535 - 40; + decoder->audio_main_vol_r = (long)work_r * (24 - (-40)) / 65535 - 40; + + /* set main volume */ + /* main volume L[7-0],R[7-0],0x00 24=24dB,-83dB, -84(mute) */ + /* def:0dB->6dB(MPG600GR) */ + /* if mute is on, set mute */ + if (decoder->audio_main_mute) { + val = mute | (mute << 8); + } else { + val = (u8)decoder->audio_main_vol_l | + ((u8)decoder->audio_main_vol_r << 8); + } + + saa717x_write(client, 0x480, val); + + /* bass and treble; go to another function */ + /* set bass and treble */ + val = decoder->audio_main_bass | (decoder->audio_main_treble << 8); + saa717x_write(client, 0x488, val); + return 0; +} + +/********** scaling staff ***********/ +static void set_h_prescale(struct i2c_client *client, + int task, int prescale) +{ + static const struct { + int xpsc; + int xacl; + int xc2_1; + int xdcg; + int vpfy; + } vals[] = { + /* XPSC XACL XC2_1 XDCG VPFY */ + { 1, 0, 0, 0, 0 }, + { 2, 2, 1, 2, 2 }, + { 3, 4, 1, 3, 2 }, + { 4, 8, 1, 4, 2 }, + { 5, 8, 1, 4, 2 }, + { 6, 8, 1, 4, 3 }, + { 7, 8, 1, 4, 3 }, + { 8, 15, 0, 4, 3 }, + { 9, 15, 0, 4, 3 }, + { 10, 16, 1, 5, 3 }, + }; + static const int count = ARRAY_SIZE(vals); + int i, task_shift; + + task_shift = task * 0x40; + for (i = 0; i < count; i++) + if (vals[i].xpsc == prescale) + break; + if (i == count) + return; + + /* horizonal prescaling */ + saa717x_write(client, 0x60 + task_shift, vals[i].xpsc); + /* accumulation length */ + saa717x_write(client, 0x61 + task_shift, vals[i].xacl); + /* level control */ + saa717x_write(client, 0x62 + task_shift, + (vals[i].xc2_1 << 3) | vals[i].xdcg); + /*FIR prefilter control */ + saa717x_write(client, 0x63 + task_shift, + (vals[i].vpfy << 2) | vals[i].vpfy); +} + +/********** scaling staff ***********/ +static void set_v_scale(struct i2c_client *client, int task, int yscale) +{ + int task_shift; + + task_shift = task * 0x40; + /* Vertical scaling ratio (LOW) */ + saa717x_write(client, 0x70 + task_shift, yscale & 0xff); + /* Vertical scaling ratio (HI) */ + saa717x_write(client, 0x71 + task_shift, yscale >> 8); +} + +static int saa717x_set_audio_clock_freq(struct i2c_client *client, u32 freq) +{ + /* not yet implament, so saa717x_cfg_??hz_??_audio is not defined. */ + return 0; +} + +static int saa717x_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct saa717x_state *state = i2c_get_clientdata(client); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (ctrl->value < 0 || ctrl->value > 255) { + v4l_err(client, "invalid brightness setting %d\n", ctrl->value); + return -ERANGE; + } + + state->bright = ctrl->value; + v4l_dbg(1, debug, client, "bright:%d\n", state->bright); + saa717x_write(client, 0x10a, state->bright); + break; + + case V4L2_CID_CONTRAST: + if (ctrl->value < 0 || ctrl->value > 127) { + v4l_err(client, "invalid contrast setting %d\n", ctrl->value); + return -ERANGE; + } + + state->contrast = ctrl->value; + v4l_dbg(1, debug, client, "contrast:%d\n", state->contrast); + saa717x_write(client, 0x10b, state->contrast); + break; + + case V4L2_CID_SATURATION: + if (ctrl->value < 0 || ctrl->value > 127) { + v4l_err(client, "invalid saturation setting %d\n", ctrl->value); + return -ERANGE; + } + + state->sat = ctrl->value; + v4l_dbg(1, debug, client, "sat:%d\n", state->sat); + saa717x_write(client, 0x10c, state->sat); + break; + + case V4L2_CID_HUE: + if (ctrl->value < -127 || ctrl->value > 127) { + v4l_err(client, "invalid hue setting %d\n", ctrl->value); + return -ERANGE; + } + + state->hue = ctrl->value; + v4l_dbg(1, debug, client, "hue:%d\n", state->hue); + saa717x_write(client, 0x10d, state->hue); + break; + + case V4L2_CID_AUDIO_MUTE: + state->audio_main_mute = ctrl->value; + set_audio_regs(client, state); + break; + + case V4L2_CID_AUDIO_VOLUME: + state->audio_main_volume = ctrl->value; + set_audio_regs(client, state); + break; + + case V4L2_CID_AUDIO_BALANCE: + state->audio_main_balance = ctrl->value; + set_audio_regs(client, state); + break; + + case V4L2_CID_AUDIO_TREBLE: + state->audio_main_treble = ctrl->value; + set_audio_regs(client, state); + break; + + case V4L2_CID_AUDIO_BASS: + state->audio_main_bass = ctrl->value; + set_audio_regs(client, state); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int saa717x_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct saa717x_state *state = i2c_get_clientdata(client); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = state->bright; + break; + + case V4L2_CID_CONTRAST: + ctrl->value = state->contrast; + break; + + case V4L2_CID_SATURATION: + ctrl->value = state->sat; + break; + + case V4L2_CID_HUE: + ctrl->value = state->hue; + break; + + case V4L2_CID_AUDIO_MUTE: + ctrl->value = state->audio_main_mute; + break; + + case V4L2_CID_AUDIO_VOLUME: + ctrl->value = state->audio_main_volume; + break; + + case V4L2_CID_AUDIO_BALANCE: + ctrl->value = state->audio_main_balance; + break; + + case V4L2_CID_AUDIO_TREBLE: + ctrl->value = state->audio_main_treble; + break; + + case V4L2_CID_AUDIO_BASS: + ctrl->value = state->audio_main_bass; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static struct v4l2_queryctrl saa717x_qctrl[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 128, + .flags = 0, + }, { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 64, + .flags = 0, + }, { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 64, + .flags = 0, + }, { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -128, + .maximum = 127, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_AUDIO_VOLUME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Volume", + .minimum = 0, + .maximum = 65535, + .step = 65535 / 100, + .default_value = 58880, + .flags = 0, + }, { + .id = V4L2_CID_AUDIO_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Balance", + .minimum = 0, + .maximum = 65535, + .step = 65535 / 100, + .default_value = 32768, + .flags = 0, + }, { + .id = V4L2_CID_AUDIO_MUTE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + .flags = 0, + }, { + .id = V4L2_CID_AUDIO_BASS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Bass", + .minimum = 0, + .maximum = 65535, + .step = 65535 / 100, + .default_value = 32768, + }, { + .id = V4L2_CID_AUDIO_TREBLE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Treble", + .minimum = 0, + .maximum = 65535, + .step = 65535 / 100, + .default_value = 32768, + }, +}; + +static int saa717x_set_video_input(struct i2c_client *client, struct saa717x_state *decoder, int inp) +{ + int is_tuner = inp & 0x80; /* tuner input flag */ + + inp &= 0x7f; + + v4l_dbg(1, debug, client, "decoder set input (%d)\n", inp); + /* inputs from 0-9 are available*/ + /* saa717x have mode0-mode9 but mode5 is reserved. */ + if (inp < 0 || inp > 9 || inp == 5) + return -EINVAL; + + if (decoder->input != inp) { + int input_line = inp; + + decoder->input = input_line; + v4l_dbg(1, debug, client, "now setting %s input %d\n", + input_line >= 6 ? "S-Video" : "Composite", + input_line); + + /* select mode */ + saa717x_write(client, 0x102, + (saa717x_read(client, 0x102) & 0xf0) | + input_line); + + /* bypass chrominance trap for modes 6..9 */ + saa717x_write(client, 0x109, + (saa717x_read(client, 0x109) & 0x7f) | + (input_line < 6 ? 0x0 : 0x80)); + + /* change audio_mode */ + if (is_tuner) { + /* tuner */ + set_audio_mode(client, decoder->tuner_audio_mode); + } else { + /* Force to STEREO mode if Composite or + * S-Video were chosen */ + set_audio_mode(client, TUNER_AUDIO_STEREO); + } + /* change initialize procedure (Composite/S-Video) */ + if (is_tuner) + saa717x_write_regs(client, reg_init_tuner_input); + else if (input_line >= 6) + saa717x_write_regs(client, reg_init_svideo_input); + else + saa717x_write_regs(client, reg_init_composite_input); + } + + return 0; +} + +static int saa717x_command(struct i2c_client *client, unsigned cmd, void *arg) +{ + struct saa717x_state *decoder = i2c_get_clientdata(client); + + v4l_dbg(1, debug, client, "IOCTL: %08x\n", cmd); + + switch (cmd) { + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + return saa717x_set_audio_clock_freq(client, *(u32 *)arg); + + case VIDIOC_G_CTRL: + return saa717x_get_v4lctrl(client, (struct v4l2_control *)arg); + + case VIDIOC_S_CTRL: + return saa717x_set_v4lctrl(client, (struct v4l2_control *)arg); + + case VIDIOC_QUERYCTRL: { + struct v4l2_queryctrl *qc = arg; + int i; + + for (i = 0; i < ARRAY_SIZE(saa717x_qctrl); i++) + if (qc->id && qc->id == saa717x_qctrl[i].id) { + memcpy(qc, &saa717x_qctrl[i], sizeof(*qc)); + return 0; + } + return -EINVAL; + } + +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_DBG_G_REGISTER: { + struct v4l2_register *reg = arg; + + if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = saa717x_read(client, reg->reg); + break; + } + + case VIDIOC_DBG_S_REGISTER: { + struct v4l2_register *reg = arg; + u16 addr = reg->reg & 0xffff; + u8 val = reg->val & 0xff; + + if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa717x_write(client, addr, val); + break; + } +#endif + + case VIDIOC_S_FMT: { + struct v4l2_format *fmt = (struct v4l2_format *)arg; + struct v4l2_pix_format *pix; + int prescale, h_scale, v_scale; + + pix = &fmt->fmt.pix; + v4l_dbg(1, debug, client, "decoder set size\n"); + + /* FIXME need better bounds checking here */ + if (pix->width < 1 || pix->width > 1440) + return -EINVAL; + if (pix->height < 1 || pix->height > 960) + return -EINVAL; + + /* scaling setting */ + /* NTSC and interlace only */ + prescale = SAA717X_NTSC_WIDTH / pix->width; + if (prescale == 0) + prescale = 1; + h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / pix->width; + /* interlace */ + v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / pix->height; + + /* Horizontal prescaling etc */ + set_h_prescale(client, 0, prescale); + set_h_prescale(client, 1, prescale); + + /* Horizontal scaling increment */ + /* TASK A */ + saa717x_write(client, 0x6C, (u8)(h_scale & 0xFF)); + saa717x_write(client, 0x6D, (u8)((h_scale >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(client, 0xAC, (u8)(h_scale & 0xFF)); + saa717x_write(client, 0xAD, (u8)((h_scale >> 8) & 0xFF)); + + /* Vertical prescaling etc */ + set_v_scale(client, 0, v_scale); + set_v_scale(client, 1, v_scale); + + /* set video output size */ + /* video number of pixels at output */ + /* TASK A */ + saa717x_write(client, 0x5C, (u8)(pix->width & 0xFF)); + saa717x_write(client, 0x5D, (u8)((pix->width >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(client, 0x9C, (u8)(pix->width & 0xFF)); + saa717x_write(client, 0x9D, (u8)((pix->width >> 8) & 0xFF)); + + /* video number of lines at output */ + /* TASK A */ + saa717x_write(client, 0x5E, (u8)(pix->height & 0xFF)); + saa717x_write(client, 0x5F, (u8)((pix->height >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(client, 0x9E, (u8)(pix->height & 0xFF)); + saa717x_write(client, 0x9F, (u8)((pix->height >> 8) & 0xFF)); + break; + } + + case AUDC_SET_RADIO: + decoder->radio = 1; + break; + + case VIDIOC_S_STD: { + v4l2_std_id std = *(v4l2_std_id *) arg; + + v4l_dbg(1, debug, client, "decoder set norm "); + v4l_dbg(1, debug, client, "(not yet implementd)\n"); + + decoder->radio = 0; + decoder->std = std; + break; + } + + case VIDIOC_INT_G_AUDIO_ROUTING: { + struct v4l2_routing *route = arg; + + route->input = decoder->audio_input; + route->output = 0; + break; + } + + case VIDIOC_INT_S_AUDIO_ROUTING: { + struct v4l2_routing *route = arg; + + if (route->input < 3) { /* FIXME! --tadachi */ + decoder->audio_input = route->input; + v4l_dbg(1, debug, client, + "set decoder audio input to %d\n", + decoder->audio_input); + set_audio_regs(client, decoder); + break; + } + return -ERANGE; + } + + case VIDIOC_INT_S_VIDEO_ROUTING: { + struct v4l2_routing *route = arg; + int inp = route->input; + + return saa717x_set_video_input(client, decoder, inp); + } + + case VIDIOC_STREAMON: { + v4l_dbg(1, debug, client, "decoder enable output\n"); + decoder->enable = 1; + saa717x_write(client, 0x193, 0xa6); + break; + } + + case VIDIOC_STREAMOFF: { + v4l_dbg(1, debug, client, "decoder disable output\n"); + decoder->enable = 0; + saa717x_write(client, 0x193, 0x26); /* right? FIXME!--tadachi */ + break; + } + + /* change audio mode */ + case VIDIOC_S_TUNER: { + struct v4l2_tuner *vt = (struct v4l2_tuner *)arg; + int audio_mode; + char *mes[4] = { + "MONO", "STEREO", "LANG1", "LANG2/SAP" + }; + + audio_mode = V4L2_TUNER_MODE_STEREO; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + audio_mode = TUNER_AUDIO_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + audio_mode = TUNER_AUDIO_STEREO; + break; + case V4L2_TUNER_MODE_LANG2: + audio_mode = TUNER_AUDIO_LANG2; + break; + case V4L2_TUNER_MODE_LANG1: + audio_mode = TUNER_AUDIO_LANG1; + break; + } + + v4l_dbg(1, debug, client, "change audio mode to %s\n", + mes[audio_mode]); + decoder->tuner_audio_mode = audio_mode; + /* The registers are not changed here. */ + /* See DECODER_ENABLE_OUTPUT section. */ + set_audio_mode(client, decoder->tuner_audio_mode); + break; + } + + case VIDIOC_G_TUNER: { + struct v4l2_tuner *vt = (struct v4l2_tuner *)arg; + int dual_f, stereo_f; + + if (decoder->radio) + break; + get_inf_dev_status(client, &dual_f, &stereo_f); + + v4l_dbg(1, debug, client, "DETECT==st:%d dual:%d\n", + stereo_f, dual_f); + + /* mono */ + if ((dual_f == 0) && (stereo_f == 0)) { + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + v4l_dbg(1, debug, client, "DETECT==MONO\n"); + } + + /* stereo */ + if (stereo_f == 1) { + if (vt->audmode == V4L2_TUNER_MODE_STEREO || + vt->audmode == V4L2_TUNER_MODE_LANG1) { + vt->rxsubchans = V4L2_TUNER_SUB_STEREO; + v4l_dbg(1, debug, client, "DETECT==ST(ST)\n"); + } else { + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + v4l_dbg(1, debug, client, "DETECT==ST(MONO)\n"); + } + } + + /* dual */ + if (dual_f == 1) { + if (vt->audmode == V4L2_TUNER_MODE_LANG2) { + vt->rxsubchans = V4L2_TUNER_SUB_LANG2 | V4L2_TUNER_SUB_MONO; + v4l_dbg(1, debug, client, "DETECT==DUAL1\n"); + } else { + vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_MONO; + v4l_dbg(1, debug, client, "DETECT==DUAL2\n"); + } + } + break; + } + + case VIDIOC_LOG_STATUS: + /* not yet implemented */ + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + + +/* i2c implementation */ + +/* ----------------------------------------------------------------------- */ +static int saa717x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct saa717x_state *decoder; + u8 id = 0; + char *p = ""; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + if (saa717x_write(client, 0x5a4, 0xfe) && + saa717x_write(client, 0x5a5, 0x0f) && + saa717x_write(client, 0x5a6, 0x00) && + saa717x_write(client, 0x5a7, 0x01)) + id = saa717x_read(client, 0x5a0); + if (id != 0xc2 && id != 0x32 && id != 0xf2 && id != 0x6c) { + v4l_dbg(1, debug, client, "saa717x not found (id=%02x)\n", id); + return -ENODEV; + } + if (id == 0xc2) + p = "saa7173"; + else if (id == 0x32) + p = "saa7174A"; + else if (id == 0x6c) + p = "saa7174HL"; + else + p = "saa7171"; + v4l_info(client, "%s found @ 0x%x (%s)\n", p, + client->addr << 1, client->adapter->name); + + decoder = kzalloc(sizeof(struct saa717x_state), GFP_KERNEL); + i2c_set_clientdata(client, decoder); + + if (decoder == NULL) + return -ENOMEM; + decoder->std = V4L2_STD_NTSC; + decoder->input = -1; + decoder->enable = 1; + + /* tune these parameters */ + decoder->bright = 0x80; + decoder->contrast = 0x44; + decoder->sat = 0x40; + decoder->hue = 0x00; + + /* FIXME!! */ + decoder->playback = 0; /* initially capture mode used */ + decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */ + + decoder->audio_input = 2; /* FIXME!! */ + + decoder->tuner_audio_mode = TUNER_AUDIO_STEREO; + /* set volume, bass and treble */ + decoder->audio_main_vol_l = 6; + decoder->audio_main_vol_r = 6; + decoder->audio_main_bass = 0; + decoder->audio_main_treble = 0; + decoder->audio_main_mute = 0; + decoder->audio_main_balance = 32768; + /* normalize (24 to -40 (not -84) -> 65535 to 0) */ + decoder->audio_main_volume = + (decoder->audio_main_vol_r + 41) * 65535 / (24 - (-40)); + + v4l_dbg(1, debug, client, "writing init values\n"); + + /* FIXME!! */ + saa717x_write_regs(client, reg_init_initialize); + set_video_output_level_regs(client, decoder); + /* set bass,treble to 0db 20041101 K.Ohta */ + decoder->audio_main_bass = 0; + decoder->audio_main_treble = 0; + set_audio_regs(client, decoder); + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2*HZ); + return 0; +} + +static int saa717x_remove(struct i2c_client *client) +{ + kfree(i2c_get_clientdata(client)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa717x_id[] = { + { "saa717x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa717x_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa717x", + .driverid = I2C_DRIVERID_SAA717X, + .command = saa717x_command, + .probe = saa717x_probe, + .remove = saa717x_remove, + .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL, + .id_table = saa717x_id, +}; diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 66cc92c0ea6..02fda4eecea 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -52,7 +52,7 @@ MODULE_LICENSE("GPL"); #define I2C_NAME(s) (s)->name -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -403,7 +403,7 @@ saa7185_detect_client (struct i2c_adapter *adapter, return 0; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; client->adapter = adapter; diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index d5d7d6cf734..1cd629380f7 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -35,7 +35,7 @@ static const char version[] = "0.24"; #include <linux/usb.h> #include "se401.h" -static int flickerless=0; +static int flickerless; static int video_nr = -1; static struct usb_device_id device_table [] = { @@ -300,10 +300,10 @@ static void se401_button_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + dbg("%s - urb shutting down with status: %d", __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + dbg("%s - nonzero urb status received: %d", __func__, urb->status); goto exit; } @@ -315,7 +315,7 @@ exit: status = usb_submit_urb (urb, GFP_ATOMIC); if (status) err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, status); + __func__, status); } static void se401_video_irq(struct urb *urb) @@ -1224,7 +1224,9 @@ static const struct file_operations se401_fops = { .read = se401_read, .mmap = se401_mmap, .ioctl = se401_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; static struct video_device se401_template = { @@ -1279,7 +1281,7 @@ static int se401_init(struct usb_se401 *se401, int button) rc=se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp)); se401->cheight=cp[0]+cp[1]*256; - if (!cp[2] && SE401_FORMAT_BAYER) { + if (!(cp[2] & SE401_FORMAT_BAYER)) { err("Bayer format not supported!"); return 1; } diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h index 2e3c3de793a..0c8d87d8d18 100644 --- a/drivers/media/video/sn9c102/sn9c102.h +++ b/drivers/media/video/sn9c102/sn9c102.h @@ -176,7 +176,7 @@ do { \ dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ else if ((level) >= 3) \ dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ - __FUNCTION__, __LINE__ , ## args); \ + __func__, __LINE__ , ## args); \ } \ } while (0) # define V4LDBG(level, name, cmd) \ @@ -191,7 +191,7 @@ do { \ pr_info("sn9c102: " fmt "\n", ## args); \ else if ((level) == 3) \ pr_debug("sn9c102: [%s:%d] " fmt "\n", \ - __FUNCTION__, __LINE__ , ## args); \ + __func__, __LINE__ , ## args); \ } \ } while (0) #else @@ -202,7 +202,7 @@ do { \ #undef PDBG #define PDBG(fmt, args...) \ -dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __FUNCTION__, \ +dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__, \ __LINE__ , ## args) #undef PDBGG diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index c40ba3adab2..7f9c7bcf3c8 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -34,7 +34,7 @@ #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/page-flags.h> -#include <linux/byteorder/generic.h> +#include <asm/byteorder.h> #include <asm/page.h> #include <asm/uaccess.h> @@ -464,9 +464,9 @@ sn9c102_i2c_try_read(struct sn9c102_device* cam, } -int -sn9c102_i2c_try_write(struct sn9c102_device* cam, - const struct sn9c102_sensor* sensor, u8 address, u8 value) +static int sn9c102_i2c_try_write(struct sn9c102_device* cam, + const struct sn9c102_sensor* sensor, + u8 address, u8 value) { return sn9c102_i2c_try_raw_write(cam, sensor, 3, sensor->i2c_slave_id, address, @@ -528,7 +528,7 @@ sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len) /* Search for the SOF marker (fixed part) in the header */ for (j = 0, b=cam->sof.bytesread; j+b < sizeof(marker); j++) { - if (unlikely(i+j) == len) + if (unlikely(i+j == len)) return NULL; if (*(m+i+j) == marker[cam->sof.bytesread]) { cam->sof.header[cam->sof.bytesread] = *(m+i+j); @@ -3224,7 +3224,9 @@ static const struct file_operations sn9c102_fops = { .open = sn9c102_open, .release = sn9c102_release, .ioctl = sn9c102_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = sn9c102_read, .poll = sn9c102_poll, .mmap = sn9c102_mmap, @@ -3239,7 +3241,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) { struct usb_device *udev = interface_to_usbdev(intf); struct sn9c102_device* cam; - static unsigned int dev_nr = 0; + static unsigned int dev_nr; unsigned int i; int err = 0, r; diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h index 2d7d786b843..4af7382da5c 100644 --- a/drivers/media/video/sn9c102/sn9c102_sensor.h +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -85,9 +85,6 @@ sn9c102_attach_sensor(struct sn9c102_device* cam, */ /* The "try" I2C I/O versions are used when probing the sensor */ -extern int sn9c102_i2c_try_write(struct sn9c102_device*, - const struct sn9c102_sensor*, u8 address, - u8 value); extern int sn9c102_i2c_try_read(struct sn9c102_device*, const struct sn9c102_sensor*, u8 address); @@ -126,7 +123,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2], Register adresses must be < 256. */ #define sn9c102_write_const_regs(sn9c102_device, data...) \ - ({ const static u8 _valreg[][2] = {data}; \ + ({ static const u8 _valreg[][2] = {data}; \ sn9c102_write_regs(sn9c102_device, _valreg, ARRAY_SIZE(_valreg)); }) /*****************************************************************************/ diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c new file mode 100644 index 00000000000..d015bfe0095 --- /dev/null +++ b/drivers/media/video/soc_camera.c @@ -0,0 +1,1015 @@ +/* + * camera image capture (abstract) bus driver + * + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This driver provides an interface between platform-specific camera + * busses and camera devices. It should be used if the camera is + * connected not over a "proper" bus like PCI or USB, but over a + * special bus, like, for example, the Quick Capture interface on PXA270 + * SoCs. Later it should also be used for i.MX31 SoCs from Freescale. + * It can handle multiple cameras and / or multiple busses, which can + * be used, e.g., in stereo-vision applications. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/vmalloc.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/soc_camera.h> + +static LIST_HEAD(hosts); +static LIST_HEAD(devices); +static DEFINE_MUTEX(list_lock); +static DEFINE_MUTEX(video_lock); + +const static struct soc_camera_data_format* +format_by_fourcc(struct soc_camera_device *icd, unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < icd->num_formats; i++) + if (icd->formats[i].fourcc == fourcc) + return icd->formats + i; + return NULL; +} + +static int soc_camera_try_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + enum v4l2_field field; + const struct soc_camera_data_format *fmt; + int ret; + + WARN_ON(priv != file->private_data); + + fmt = format_by_fourcc(icd, f->fmt.pix.pixelformat); + if (!fmt) { + dev_dbg(&icd->dev, "invalid format 0x%08x\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + dev_dbg(&icd->dev, "fmt: 0x%08x\n", fmt->fourcc); + + field = f->fmt.pix.field; + + if (field == V4L2_FIELD_ANY) { + field = V4L2_FIELD_NONE; + } else if (V4L2_FIELD_NONE != field) { + dev_err(&icd->dev, "Field type invalid.\n"); + return -EINVAL; + } + + /* test physical bus parameters */ + ret = ici->ops->try_bus_param(icd, f->fmt.pix.pixelformat); + if (ret) + return ret; + + /* limit format to hardware capabilities */ + ret = ici->ops->try_fmt_cap(icd, f); + + /* calculate missing fields */ + f->fmt.pix.field = field; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return ret; +} + +static int soc_camera_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + if (inp->index != 0) + return -EINVAL; + + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = V4L2_STD_UNKNOWN; + strcpy(inp->name, "Camera"); + + return 0; +} + +static int soc_camera_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + + return 0; +} + +static int soc_camera_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i > 0) + return -EINVAL; + + return 0; +} + +static int soc_camera_s_std(struct file *file, void *priv, v4l2_std_id *a) +{ + return 0; +} + +static int soc_camera_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + int ret; + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + + WARN_ON(priv != file->private_data); + + dev_dbg(&icd->dev, "%s: %d\n", __func__, p->memory); + + ret = videobuf_reqbufs(&icf->vb_vidq, p); + if (ret < 0) + return ret; + + return ici->ops->reqbufs(icf, p); +} + +static int soc_camera_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct soc_camera_file *icf = file->private_data; + + WARN_ON(priv != file->private_data); + + return videobuf_querybuf(&icf->vb_vidq, p); +} + +static int soc_camera_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct soc_camera_file *icf = file->private_data; + + WARN_ON(priv != file->private_data); + + return videobuf_qbuf(&icf->vb_vidq, p); +} + +static int soc_camera_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct soc_camera_file *icf = file->private_data; + + WARN_ON(priv != file->private_data); + + return videobuf_dqbuf(&icf->vb_vidq, p, file->f_flags & O_NONBLOCK); +} + +static int soc_camera_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev; + struct soc_camera_device *icd; + struct soc_camera_host *ici; + struct soc_camera_file *icf; + spinlock_t *lock; + int ret; + + icf = vmalloc(sizeof(*icf)); + if (!icf) + return -ENOMEM; + + /* Protect against icd->remove() until we module_get() both drivers. */ + mutex_lock(&video_lock); + + vdev = video_devdata(file); + icd = container_of(vdev->dev, struct soc_camera_device, dev); + ici = to_soc_camera_host(icd->dev.parent); + + if (!try_module_get(icd->ops->owner)) { + dev_err(&icd->dev, "Couldn't lock sensor driver.\n"); + ret = -EINVAL; + goto emgd; + } + + if (!try_module_get(ici->ops->owner)) { + dev_err(&icd->dev, "Couldn't lock capture bus driver.\n"); + ret = -EINVAL; + goto emgi; + } + + icf->icd = icd; + + icf->lock = ici->ops->spinlock_alloc(icf); + if (!icf->lock) { + ret = -ENOMEM; + goto esla; + } + + icd->use_count++; + + /* Now we really have to activate the camera */ + if (icd->use_count == 1) { + ret = ici->ops->add(icd); + if (ret < 0) { + dev_err(&icd->dev, "Couldn't activate the camera: %d\n", ret); + icd->use_count--; + goto eiciadd; + } + } + + mutex_unlock(&video_lock); + + file->private_data = icf; + dev_dbg(&icd->dev, "camera device open\n"); + + /* We must pass NULL as dev pointer, then all pci_* dma operations + * transform to normal dma_* ones. */ + videobuf_queue_sg_init(&icf->vb_vidq, ici->vbq_ops, NULL, icf->lock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE, + ici->msize, icd); + + return 0; + + /* All errors are entered with the video_lock held */ +eiciadd: + lock = icf->lock; + icf->lock = NULL; + if (ici->ops->spinlock_free) + ici->ops->spinlock_free(lock); +esla: + module_put(ici->ops->owner); +emgi: + module_put(icd->ops->owner); +emgd: + mutex_unlock(&video_lock); + vfree(icf); + return ret; +} + +static int soc_camera_close(struct inode *inode, struct file *file) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct video_device *vdev = icd->vdev; + spinlock_t *lock = icf->lock; + + mutex_lock(&video_lock); + icd->use_count--; + if (!icd->use_count) + ici->ops->remove(icd); + icf->lock = NULL; + if (ici->ops->spinlock_free) + ici->ops->spinlock_free(lock); + module_put(icd->ops->owner); + module_put(ici->ops->owner); + mutex_unlock(&video_lock); + + vfree(icf); + + dev_dbg(vdev->dev, "camera device close\n"); + + return 0; +} + +static ssize_t soc_camera_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct video_device *vdev = icd->vdev; + int err = -EINVAL; + + dev_err(vdev->dev, "camera device read not implemented\n"); + + return err; +} + +static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + int err; + + dev_dbg(&icd->dev, "mmap called, vma=0x%08lx\n", (unsigned long)vma); + + err = videobuf_mmap_mapper(&icf->vb_vidq, vma); + + dev_dbg(&icd->dev, "vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, + err); + + return err; +} + +static unsigned int soc_camera_poll(struct file *file, poll_table *pt) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + + if (list_empty(&icf->vb_vidq.stream)) { + dev_err(&icd->dev, "Trying to poll with no queued buffers!\n"); + return POLLERR; + } + + return ici->ops->poll(file, pt); +} + + +static struct file_operations soc_camera_fops = { + .owner = THIS_MODULE, + .open = soc_camera_open, + .release = soc_camera_close, + .ioctl = video_ioctl2, + .read = soc_camera_read, + .mmap = soc_camera_mmap, + .poll = soc_camera_poll, + .llseek = no_llseek, +}; + + +static int soc_camera_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + int ret; + struct v4l2_rect rect; + const static struct soc_camera_data_format *data_fmt; + + WARN_ON(priv != file->private_data); + + data_fmt = format_by_fourcc(icd, f->fmt.pix.pixelformat); + if (!data_fmt) + return -EINVAL; + + /* buswidth may be further adjusted by the ici */ + icd->buswidth = data_fmt->depth; + + ret = soc_camera_try_fmt_cap(file, icf, f); + if (ret < 0) + return ret; + + rect.left = icd->x_current; + rect.top = icd->y_current; + rect.width = f->fmt.pix.width; + rect.height = f->fmt.pix.height; + ret = ici->ops->set_fmt_cap(icd, f->fmt.pix.pixelformat, &rect); + if (ret < 0) + return ret; + + icd->current_fmt = data_fmt; + icd->width = rect.width; + icd->height = rect.height; + icf->vb_vidq.field = f->fmt.pix.field; + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != f->type) + dev_warn(&icd->dev, "Attention! Wrong buf-type %d\n", + f->type); + + dev_dbg(&icd->dev, "set width: %d height: %d\n", + icd->width, icd->height); + + /* set physical bus parameters */ + return ici->ops->set_bus_param(icd, f->fmt.pix.pixelformat); +} + +static int soc_camera_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + const struct soc_camera_data_format *format; + + WARN_ON(priv != file->private_data); + + if (f->index >= icd->num_formats) + return -EINVAL; + + format = &icd->formats[f->index]; + + strlcpy(f->description, format->name, sizeof(f->description)); + f->pixelformat = format->fourcc; + return 0; +} + +static int soc_camera_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + WARN_ON(priv != file->private_data); + + f->fmt.pix.width = icd->width; + f->fmt.pix.height = icd->height; + f->fmt.pix.field = icf->vb_vidq.field; + f->fmt.pix.pixelformat = icd->current_fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * icd->current_fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + dev_dbg(&icd->dev, "current_fmt->fourcc: 0x%08x\n", + icd->current_fmt->fourcc); + return 0; +} + +static int soc_camera_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + + WARN_ON(priv != file->private_data); + + strlcpy(cap->driver, ici->drv_name, sizeof(cap->driver)); + return ici->ops->querycap(ici, cap); +} + +static int soc_camera_streamon(struct file *file, void *priv, + enum v4l2_buf_type i) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + WARN_ON(priv != file->private_data); + + dev_dbg(&icd->dev, "%s\n", __func__); + + if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + icd->ops->start_capture(icd); + + /* This calls buf_queue from host driver's videobuf_queue_ops */ + return videobuf_streamon(&icf->vb_vidq); +} + +static int soc_camera_streamoff(struct file *file, void *priv, + enum v4l2_buf_type i) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + WARN_ON(priv != file->private_data); + + dev_dbg(&icd->dev, "%s\n", __func__); + + if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + /* This calls buf_release from host driver's videobuf_queue_ops for all + * remaining buffers. When the last buffer is freed, stop capture */ + videobuf_streamoff(&icf->vb_vidq); + + icd->ops->stop_capture(icd); + + return 0; +} + +static int soc_camera_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + int i; + + WARN_ON(priv != file->private_data); + + if (!qc->id) + return -EINVAL; + + for (i = 0; i < icd->ops->num_controls; i++) + if (qc->id == icd->ops->controls[i].id) { + memcpy(qc, &(icd->ops->controls[i]), + sizeof(*qc)); + return 0; + } + + return -EINVAL; +} + +static int soc_camera_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + WARN_ON(priv != file->private_data); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + if (icd->gain == (unsigned short)~0) + return -EINVAL; + ctrl->value = icd->gain; + return 0; + case V4L2_CID_EXPOSURE: + if (icd->exposure == (unsigned short)~0) + return -EINVAL; + ctrl->value = icd->exposure; + return 0; + } + + if (icd->ops->get_control) + return icd->ops->get_control(icd, ctrl); + return -EINVAL; +} + +static int soc_camera_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + WARN_ON(priv != file->private_data); + + if (icd->ops->set_control) + return icd->ops->set_control(icd, ctrl); + return -EINVAL; +} + +static int soc_camera_cropcap(struct file *file, void *fh, + struct v4l2_cropcap *a) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->bounds.left = icd->x_min; + a->bounds.top = icd->y_min; + a->bounds.width = icd->width_max; + a->bounds.height = icd->height_max; + a->defrect.left = icd->x_min; + a->defrect.top = icd->y_min; + a->defrect.width = 640; + a->defrect.height = 480; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int soc_camera_g_crop(struct file *file, void *fh, + struct v4l2_crop *a) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->c.left = icd->x_current; + a->c.top = icd->y_current; + a->c.width = icd->width; + a->c.height = icd->height; + + return 0; +} + +static int soc_camera_s_crop(struct file *file, void *fh, + struct v4l2_crop *a) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + int ret; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + ret = ici->ops->set_fmt_cap(icd, 0, &a->c); + if (!ret) { + icd->width = a->c.width; + icd->height = a->c.height; + icd->x_current = a->c.left; + icd->y_current = a->c.top; + } + + return ret; +} + +static int soc_camera_g_chip_ident(struct file *file, void *fh, + struct v4l2_chip_ident *id) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + if (!icd->ops->get_chip_id) + return -EINVAL; + + return icd->ops->get_chip_id(icd, id); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int soc_camera_g_register(struct file *file, void *fh, + struct v4l2_register *reg) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + if (!icd->ops->get_register) + return -EINVAL; + + return icd->ops->get_register(icd, reg); +} + +static int soc_camera_s_register(struct file *file, void *fh, + struct v4l2_register *reg) +{ + struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = icf->icd; + + if (!icd->ops->set_register) + return -EINVAL; + + return icd->ops->set_register(icd, reg); +} +#endif + +static int device_register_link(struct soc_camera_device *icd) +{ + int ret = device_register(&icd->dev); + + if (ret < 0) { + /* Prevent calling device_unregister() */ + icd->dev.parent = NULL; + dev_err(&icd->dev, "Cannot register device: %d\n", ret); + /* Even if probe() was unsuccessful for all registered drivers, + * device_register() returns 0, and we add the link, just to + * document this camera's control device */ + } else if (icd->control) + /* Have to sysfs_remove_link() before device_unregister()? */ + if (sysfs_create_link(&icd->dev.kobj, &icd->control->kobj, + "control")) + dev_warn(&icd->dev, + "Failed creating the control symlink\n"); + return ret; +} + +/* So far this function cannot fail */ +static void scan_add_host(struct soc_camera_host *ici) +{ + struct soc_camera_device *icd; + + mutex_lock(&list_lock); + + list_for_each_entry(icd, &devices, list) { + if (icd->iface == ici->nr) { + icd->dev.parent = &ici->dev; + device_register_link(icd); + } + } + + mutex_unlock(&list_lock); +} + +/* return: 0 if no match found or a match found and + * device_register() successful, error code otherwise */ +static int scan_add_device(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici; + int ret = 0; + + mutex_lock(&list_lock); + + list_add_tail(&icd->list, &devices); + + /* Watch out for class_for_each_device / class_find_device API by + * Dave Young <hidave.darkstar@gmail.com> */ + list_for_each_entry(ici, &hosts, list) { + if (icd->iface == ici->nr) { + ret = 1; + icd->dev.parent = &ici->dev; + break; + } + } + + mutex_unlock(&list_lock); + + if (ret) + ret = device_register_link(icd); + + return ret; +} + +static int soc_camera_probe(struct device *dev) +{ + struct soc_camera_device *icd = to_soc_camera_dev(dev); + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + int ret; + + if (!icd->ops->probe) + return -ENODEV; + + /* We only call ->add() here to activate and probe the camera. + * We shall ->remove() and deactivate it immediately afterwards. */ + ret = ici->ops->add(icd); + if (ret < 0) + return ret; + + ret = icd->ops->probe(icd); + if (ret >= 0) { + const struct v4l2_queryctrl *qctrl; + + qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_GAIN); + icd->gain = qctrl ? qctrl->default_value : (unsigned short)~0; + qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); + icd->exposure = qctrl ? qctrl->default_value : + (unsigned short)~0; + } + ici->ops->remove(icd); + + return ret; +} + +/* This is called on device_unregister, which only means we have to disconnect + * from the host, but not remove ourselves from the device list */ +static int soc_camera_remove(struct device *dev) +{ + struct soc_camera_device *icd = to_soc_camera_dev(dev); + + if (icd->ops->remove) + icd->ops->remove(icd); + + return 0; +} + +static struct bus_type soc_camera_bus_type = { + .name = "soc-camera", + .probe = soc_camera_probe, + .remove = soc_camera_remove, +}; + +static struct device_driver ic_drv = { + .name = "camera", + .bus = &soc_camera_bus_type, + .owner = THIS_MODULE, +}; + +static void dummy_release(struct device *dev) +{ +} + +static spinlock_t *spinlock_alloc(struct soc_camera_file *icf) +{ + spinlock_t *lock = kmalloc(sizeof(spinlock_t), GFP_KERNEL); + + if (lock) + spin_lock_init(lock); + + return lock; +} + +static void spinlock_free(spinlock_t *lock) +{ + kfree(lock); +} + +int soc_camera_host_register(struct soc_camera_host *ici) +{ + int ret; + struct soc_camera_host *ix; + + if (!ici->vbq_ops || !ici->ops->add || !ici->ops->remove) + return -EINVAL; + + /* Number might be equal to the platform device ID */ + sprintf(ici->dev.bus_id, "camera_host%d", ici->nr); + + mutex_lock(&list_lock); + list_for_each_entry(ix, &hosts, list) { + if (ix->nr == ici->nr) { + mutex_unlock(&list_lock); + return -EBUSY; + } + } + + list_add_tail(&ici->list, &hosts); + mutex_unlock(&list_lock); + + ici->dev.release = dummy_release; + + ret = device_register(&ici->dev); + + if (ret) + goto edevr; + + if (!ici->ops->spinlock_alloc) { + ici->ops->spinlock_alloc = spinlock_alloc; + ici->ops->spinlock_free = spinlock_free; + } + + scan_add_host(ici); + + return 0; + +edevr: + mutex_lock(&list_lock); + list_del(&ici->list); + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(soc_camera_host_register); + +/* Unregister all clients! */ +void soc_camera_host_unregister(struct soc_camera_host *ici) +{ + struct soc_camera_device *icd; + + mutex_lock(&list_lock); + + list_del(&ici->list); + + list_for_each_entry(icd, &devices, list) { + if (icd->dev.parent == &ici->dev) { + device_unregister(&icd->dev); + /* Not before device_unregister(), .remove + * needs parent to call ici->ops->remove() */ + icd->dev.parent = NULL; + memset(&icd->dev.kobj, 0, sizeof(icd->dev.kobj)); + } + } + + mutex_unlock(&list_lock); + + device_unregister(&ici->dev); +} +EXPORT_SYMBOL(soc_camera_host_unregister); + +/* Image capture device */ +int soc_camera_device_register(struct soc_camera_device *icd) +{ + struct soc_camera_device *ix; + int num = -1, i; + + if (!icd) + return -EINVAL; + + for (i = 0; i < 256 && num < 0; i++) { + num = i; + list_for_each_entry(ix, &devices, list) { + if (ix->iface == icd->iface && ix->devnum == i) { + num = -1; + break; + } + } + } + + if (num < 0) + /* ok, we have 256 cameras on this host... + * man, stay reasonable... */ + return -ENOMEM; + + icd->devnum = num; + icd->dev.bus = &soc_camera_bus_type; + snprintf(icd->dev.bus_id, sizeof(icd->dev.bus_id), + "%u-%u", icd->iface, icd->devnum); + + icd->dev.release = dummy_release; + + return scan_add_device(icd); +} +EXPORT_SYMBOL(soc_camera_device_register); + +void soc_camera_device_unregister(struct soc_camera_device *icd) +{ + mutex_lock(&list_lock); + list_del(&icd->list); + + /* The bus->remove will be eventually called */ + if (icd->dev.parent) + device_unregister(&icd->dev); + mutex_unlock(&list_lock); +} +EXPORT_SYMBOL(soc_camera_device_unregister); + +int soc_camera_video_start(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + int err = -ENOMEM; + struct video_device *vdev; + + if (!icd->dev.parent) + return -ENODEV; + + vdev = video_device_alloc(); + if (!vdev) + goto evidallocd; + dev_dbg(&ici->dev, "Allocated video_device %p\n", vdev); + + strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name)); + /* Maybe better &ici->dev */ + vdev->dev = &icd->dev; + vdev->type = VID_TYPE_CAPTURE; + vdev->current_norm = V4L2_STD_UNKNOWN; + vdev->fops = &soc_camera_fops; + vdev->release = video_device_release; + vdev->minor = -1; + vdev->tvnorms = V4L2_STD_UNKNOWN, + vdev->vidioc_querycap = soc_camera_querycap; + vdev->vidioc_g_fmt_cap = soc_camera_g_fmt_cap; + vdev->vidioc_enum_fmt_cap = soc_camera_enum_fmt_cap; + vdev->vidioc_s_fmt_cap = soc_camera_s_fmt_cap; + vdev->vidioc_enum_input = soc_camera_enum_input; + vdev->vidioc_g_input = soc_camera_g_input; + vdev->vidioc_s_input = soc_camera_s_input; + vdev->vidioc_s_std = soc_camera_s_std; + vdev->vidioc_reqbufs = soc_camera_reqbufs; + vdev->vidioc_try_fmt_cap = soc_camera_try_fmt_cap; + vdev->vidioc_querybuf = soc_camera_querybuf; + vdev->vidioc_qbuf = soc_camera_qbuf; + vdev->vidioc_dqbuf = soc_camera_dqbuf; + vdev->vidioc_streamon = soc_camera_streamon; + vdev->vidioc_streamoff = soc_camera_streamoff; + vdev->vidioc_queryctrl = soc_camera_queryctrl; + vdev->vidioc_g_ctrl = soc_camera_g_ctrl; + vdev->vidioc_s_ctrl = soc_camera_s_ctrl; + vdev->vidioc_cropcap = soc_camera_cropcap; + vdev->vidioc_g_crop = soc_camera_g_crop; + vdev->vidioc_s_crop = soc_camera_s_crop; + vdev->vidioc_g_chip_ident = soc_camera_g_chip_ident; +#ifdef CONFIG_VIDEO_ADV_DEBUG + vdev->vidioc_g_register = soc_camera_g_register; + vdev->vidioc_s_register = soc_camera_s_register; +#endif + + icd->current_fmt = &icd->formats[0]; + + err = video_register_device(vdev, VFL_TYPE_GRABBER, vdev->minor); + if (err < 0) { + dev_err(vdev->dev, "video_register_device failed\n"); + goto evidregd; + } + icd->vdev = vdev; + + return 0; + +evidregd: + video_device_release(vdev); +evidallocd: + return err; +} +EXPORT_SYMBOL(soc_camera_video_start); + +void soc_camera_video_stop(struct soc_camera_device *icd) +{ + struct video_device *vdev = icd->vdev; + + dev_dbg(&icd->dev, "%s\n", __func__); + + if (!icd->dev.parent || !vdev) + return; + + mutex_lock(&video_lock); + video_unregister_device(vdev); + icd->vdev = NULL; + mutex_unlock(&video_lock); +} +EXPORT_SYMBOL(soc_camera_video_stop); + +static int __init soc_camera_init(void) +{ + int ret = bus_register(&soc_camera_bus_type); + if (ret) + return ret; + ret = driver_register(&ic_drv); + if (ret) + goto edrvr; + + return 0; + +edrvr: + bus_unregister(&soc_camera_bus_type); + return ret; +} + +static void __exit soc_camera_exit(void) +{ + driver_unregister(&ic_drv); + bus_unregister(&soc_camera_bus_type); +} + +module_init(soc_camera_init); +module_exit(soc_camera_exit); + +MODULE_DESCRIPTION("Image capture bus driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index ceba45ad029..b12c60cf5a0 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -30,6 +30,7 @@ #include <linux/kref.h> #include <linux/usb.h> +#include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> @@ -245,6 +246,8 @@ static int stk_initialise(struct stk_camera *dev) return -1; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT + /* sysfs functions */ /*FIXME cleanup this */ @@ -350,6 +353,10 @@ static void stk_remove_sysfs_files(struct video_device *vdev) video_device_remove_file(vdev, &dev_attr_vflip); } +#else +#define stk_create_sysfs_files(a) +#define stk_remove_sysfs_files(a) +#endif /* *********************************************** */ /* @@ -1100,7 +1107,7 @@ static int stk_setup_format(struct stk_camera *dev) && i < ARRAY_SIZE(stk_sizes)) i++; if (i == ARRAY_SIZE(stk_sizes)) { - STK_ERROR("Something is broken in %s\n", __FUNCTION__); + STK_ERROR("Something is broken in %s\n", __func__); return -EFAULT; } /* This registers controls some timings, not sure of what. */ @@ -1465,7 +1472,7 @@ static void stk_camera_disconnect(struct usb_interface *interface) } #ifdef CONFIG_PM -int stk_camera_suspend(struct usb_interface *intf, pm_message_t message) +static int stk_camera_suspend(struct usb_interface *intf, pm_message_t message) { struct stk_camera *dev = usb_get_intfdata(intf); if (is_streaming(dev)) { @@ -1476,7 +1483,7 @@ int stk_camera_suspend(struct usb_interface *intf, pm_message_t message) return 0; } -int stk_camera_resume(struct usb_interface *intf) +static int stk_camera_resume(struct usb_interface *intf) { struct stk_camera *dev = usb_get_intfdata(intf); if (!is_initialised(dev)) diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index 3fb85af5d1f..c109511f21e 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -58,7 +58,7 @@ static struct saa7146 saa7146s[SAA7146_MAX]; -static int saa_num = 0; /* number of SAA7146s in use */ +static int saa_num; /* number of SAA7146s in use */ static int video_nr = -1; module_param(video_nr, int, 0); @@ -248,7 +248,7 @@ static void I2CBusScan(struct saa7146 *saa) attach_inform(saa, i); } -static int debiwait_maxwait = 0; +static int debiwait_maxwait; static int wait_for_debi_done(struct saa7146 *saa) { @@ -1906,7 +1906,9 @@ static const struct file_operations saa_fops = { .open = saa_open, .release = saa_release, .ioctl = saa_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = saa_read, .llseek = no_llseek, .write = saa_write, diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index afc32aa56fd..d7f130bedb5 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -72,15 +72,18 @@ #include "stv680.h" static int video_nr = -1; -static int swapRGB = 0; /* default for auto sleect */ -static int swapRGB_on = 0; /* default to allow auto select; -1=swap never, +1= swap always */ -static unsigned int debug = 0; +static int swapRGB; /* 0 = default for auto select */ + +/* 0 = default to allow auto select; -1 = swap never, +1 = swap always */ +static int swapRGB_on; + +static unsigned int debug; #define PDEBUG(level, fmt, args...) \ do { \ if (debug >= level) \ - info("[%s:%d] " fmt, __FUNCTION__, __LINE__ , ## args); \ + info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ } while (0) @@ -1391,7 +1394,9 @@ static const struct file_operations stv680_fops = { .read = stv680_read, .mmap = stv680_mmap, .ioctl = stv680_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; static struct video_device stv680_template = { diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c index fb895f6684a..8f0100f67a9 100644 --- a/drivers/media/video/tcm825x.c +++ b/drivers/media/video/tcm825x.c @@ -840,7 +840,8 @@ static struct v4l2_int_device tcm825x_int_device = { }, }; -static int tcm825x_probe(struct i2c_client *client) +static int tcm825x_probe(struct i2c_client *client, + const struct i2c_device_id *did) { struct tcm825x_sensor *sensor = &tcm825x; int rval; @@ -884,12 +885,19 @@ static int __exit tcm825x_remove(struct i2c_client *client) return 0; } +static const struct i2c_device_id tcm825x_id[] = { + { "tcm825x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tcm825x_id); + static struct i2c_driver tcm825x_i2c_driver = { .driver = { .name = TCM825X_NAME, }, .probe = tcm825x_probe, .remove = __exit_p(tcm825x_remove), + .id_table = tcm825x_id, }; static struct tcm825x_sensor tcm825x = { @@ -906,7 +914,7 @@ static int __init tcm825x_init(void) rval = i2c_add_driver(&tcm825x_i2c_driver); if (rval) printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n", - __FUNCTION__); + __func__); return rval; } diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index ef494febb5e..0cee0024278 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -31,11 +31,11 @@ #include "tda9840.h" -static int debug = 0; /* insmod parameter */ +static int debug; /* insmod parameter */ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) + do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) #define SWITCH 0x00 #define LEVEL_ADJUST 0x02 @@ -172,7 +172,7 @@ static int detect(struct i2c_adapter *adapter, int address, int kind) /* allocate memory for client structure */ client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (0 == client) { + if (!client) { printk("not enough kernel memory\n"); return -ENOMEM; } diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c index 523df0b8cc6..9513d8611e8 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/video/tea6415c.c @@ -33,11 +33,11 @@ #include "tea6415c.h" -static int debug = 0; /* insmod parameter */ +static int debug; /* insmod parameter */ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) + do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) #define TEA6415C_NUM_INPUTS 8 #define TEA6415C_NUM_OUTPUTS 6 @@ -64,7 +64,7 @@ static int detect(struct i2c_adapter *adapter, int address, int kind) /* allocate memory for client structure */ client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (0 == client) { + if (!client) { return -ENOMEM; } diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index ca05cd65508..7fd53367c07 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -33,11 +33,11 @@ #include "tea6420.h" -static int debug = 0; /* insmod parameter */ +static int debug; /* insmod parameter */ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) + do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) /* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */ static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END }; @@ -101,7 +101,7 @@ static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind) /* allocate memory for client structure */ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (0 == client) { + if (!client) { return -ENOMEM; } diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c index dc7b9c220b9..28ab9f9d760 100644 --- a/drivers/media/video/tlv320aic23b.c +++ b/drivers/media/video/tlv320aic23b.c @@ -125,7 +125,8 @@ static int tlv320aic23b_command(struct i2c_client *client, * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static int tlv320aic23b_probe(struct i2c_client *client) +static int tlv320aic23b_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct tlv320aic23b_state *state; @@ -167,6 +168,11 @@ static int tlv320aic23b_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static const struct i2c_device_id tlv320aic23b_id[] = { + { "tlv320aic23b", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tlv320aic23b_id); static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "tlv320aic23b", @@ -174,4 +180,5 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .command = tlv320aic23b_command, .probe = tlv320aic23b_probe, .remove = tlv320aic23b_remove, + .id_table = tlv320aic23b_id, }; diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 78a09a2a485..0d12ace6166 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -33,6 +33,46 @@ #define PREFIX t->i2c->driver->driver.name +/** This macro allows us to probe dynamically, avoiding static links */ +#ifdef CONFIG_MEDIA_ATTACH +#define tuner_symbol_probe(FUNCTION, ARGS...) ({ \ + int __r = -EINVAL; \ + typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ + if (__a) { \ + __r = (int) __a(ARGS); \ + symbol_put(FUNCTION); \ + } else { \ + printk(KERN_ERR "TUNER: Unable to find " \ + "symbol "#FUNCTION"()\n"); \ + } \ + __r; \ +}) + +static void tuner_detach(struct dvb_frontend *fe) +{ + if (fe->ops.tuner_ops.release) { + fe->ops.tuner_ops.release(fe); + symbol_put_addr(fe->ops.tuner_ops.release); + } + if (fe->ops.analog_ops.release) { + fe->ops.analog_ops.release(fe); + symbol_put_addr(fe->ops.analog_ops.release); + } +} +#else +#define tuner_symbol_probe(FUNCTION, ARGS...) ({ \ + FUNCTION(ARGS); \ +}) + +static void tuner_detach(struct dvb_frontend *fe) +{ + if (fe->ops.tuner_ops.release) + fe->ops.tuner_ops.release(fe); + if (fe->ops.analog_ops.release) + fe->ops.analog_ops.release(fe); +} +#endif + struct tuner { /* device */ struct dvb_frontend fe; @@ -52,11 +92,12 @@ struct tuner { unsigned int type; /* chip type id */ unsigned int config; int (*tuner_callback) (void *dev, int command, int arg); + const char *name; }; /* standard i2c insmod options */ static unsigned short normal_i2c[] = { -#if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE)) +#if defined(CONFIG_MEDIA_TUNER_TEA5761) || (defined(CONFIG_MEDIA_TUNER_TEA5761_MODULE) && defined(MODULE)) 0x10, #endif 0x42, 0x43, 0x4a, 0x4b, /* tda8290 */ @@ -68,9 +109,9 @@ static unsigned short normal_i2c[] = { I2C_CLIENT_INSMOD; /* insmod options used at init time => read/only */ -static unsigned int addr = 0; -static unsigned int no_autodetect = 0; -static unsigned int show_i2c = 0; +static unsigned int addr; +static unsigned int no_autodetect; +static unsigned int show_i2c; /* insmod options used at runtime => read/write */ static int tuner_debug; @@ -139,22 +180,6 @@ static void fe_set_params(struct dvb_frontend *fe, fe_tuner_ops->set_analog_params(fe, params); } -static void fe_release(struct dvb_frontend *fe) -{ - if (fe->ops.tuner_ops.release) - fe->ops.tuner_ops.release(fe); - - /* DO NOT kfree(fe->analog_demod_priv) - * - * If we are in this function, analog_demod_priv contains a pointer - * to struct tuner *t. This will be kfree'd in tuner_detach(). - * - * Otherwise, fe->ops.analog_demod_ops->release will - * handle the cleanup for analog demodulator modules. - */ - fe->analog_demod_priv = NULL; -} - static void fe_standby(struct dvb_frontend *fe) { struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; @@ -191,7 +216,6 @@ static void tuner_status(struct dvb_frontend *fe); static struct analog_demod_ops tuner_core_ops = { .set_params = fe_set_params, .standby = fe_standby, - .release = fe_release, .has_signal = fe_has_signal, .set_config = fe_set_config, .tuner_status = tuner_status @@ -307,35 +331,16 @@ static void tuner_i2c_address_check(struct tuner *t) tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n"); tuner_warn("will soon be dropped. This message indicates that your\n"); tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n", - t->i2c->name, t->i2c->addr); + t->name, t->i2c->addr); tuner_warn("To ensure continued support for your device, please\n"); tuner_warn("send a copy of this message, along with full dmesg\n"); tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n"); tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n"); tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n", - t->i2c->adapter->name, t->i2c->addr, t->type, - tuners[t->type].name); + t->i2c->adapter->name, t->i2c->addr, t->type, t->name); tuner_warn("====================== WARNING! ======================\n"); } -static void attach_simple_tuner(struct tuner *t) -{ - struct simple_tuner_config cfg = { - .type = t->type, - .tun = &tuners[t->type] - }; - simple_tuner_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg); -} - -static void attach_tda829x(struct tuner *t) -{ - struct tda829x_config cfg = { - .lna_cfg = &t->config, - .tuner_callback = t->tuner_callback, - }; - tda829x_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg); -} - static struct xc5000_config xc5000_cfg; static void set_type(struct i2c_client *c, unsigned int type, @@ -352,11 +357,6 @@ static void set_type(struct i2c_client *c, unsigned int type, return; } - if (type >= tuner_count) { - tuner_warn ("tuner 0x%02x: Tuner count greater than %d\n",c->addr,tuner_count); - return; - } - t->type = type; t->config = new_config; if (tuner_callback != NULL) { @@ -371,32 +371,36 @@ static void set_type(struct i2c_client *c, unsigned int type, } /* discard private data, in case set_type() was previously called */ - if (analog_ops->release) - analog_ops->release(&t->fe); + tuner_detach(&t->fe); + t->fe.analog_demod_priv = NULL; switch (t->type) { case TUNER_MT2032: - microtune_attach(&t->fe, t->i2c->adapter, t->i2c->addr); + if (!dvb_attach(microtune_attach, + &t->fe, t->i2c->adapter, t->i2c->addr)) + goto attach_failed; break; case TUNER_PHILIPS_TDA8290: { - attach_tda829x(t); + struct tda829x_config cfg = { + .lna_cfg = t->config, + .tuner_callback = t->tuner_callback, + }; + if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter, + t->i2c->addr, &cfg)) + goto attach_failed; break; } case TUNER_TEA5767: - if (tea5767_attach(&t->fe, t->i2c->adapter, t->i2c->addr) == NULL) { - t->type = TUNER_ABSENT; - t->mode_mask = T_UNINITIALIZED; - return; - } + if (!dvb_attach(tea5767_attach, &t->fe, + t->i2c->adapter, t->i2c->addr)) + goto attach_failed; t->mode_mask = T_RADIO; break; case TUNER_TEA5761: - if (tea5761_attach(&t->fe, t->i2c->adapter, t->i2c->addr) == NULL) { - t->type = TUNER_ABSENT; - t->mode_mask = T_UNINITIALIZED; - return; - } + if (!dvb_attach(tea5761_attach, &t->fe, + t->i2c->adapter, t->i2c->addr)) + goto attach_failed; t->mode_mask = T_RADIO; break; case TUNER_PHILIPS_FMD1216ME_MK3: @@ -409,79 +413,100 @@ static void set_type(struct i2c_client *c, unsigned int type, buffer[2] = 0x86; buffer[3] = 0x54; i2c_master_send(c, buffer, 4); - attach_simple_tuner(t); + if (!dvb_attach(simple_tuner_attach, &t->fe, + t->i2c->adapter, t->i2c->addr, t->type)) + goto attach_failed; break; case TUNER_PHILIPS_TD1316: buffer[0] = 0x0b; buffer[1] = 0xdc; buffer[2] = 0x86; buffer[3] = 0xa4; - i2c_master_send(c,buffer,4); - attach_simple_tuner(t); + i2c_master_send(c, buffer, 4); + if (!dvb_attach(simple_tuner_attach, &t->fe, + t->i2c->adapter, t->i2c->addr, t->type)) + goto attach_failed; break; case TUNER_XC2028: { struct xc2028_config cfg = { .i2c_adap = t->i2c->adapter, .i2c_addr = t->i2c->addr, - .video_dev = c->adapter->algo_data, .callback = t->tuner_callback, }; - if (!xc2028_attach(&t->fe, &cfg)) { - t->type = TUNER_ABSENT; - t->mode_mask = T_UNINITIALIZED; - return; - } + if (!dvb_attach(xc2028_attach, &t->fe, &cfg)) + goto attach_failed; break; } case TUNER_TDA9887: - tda9887_attach(&t->fe, t->i2c->adapter, t->i2c->addr); + if (!dvb_attach(tda9887_attach, + &t->fe, t->i2c->adapter, t->i2c->addr)) + goto attach_failed; break; case TUNER_XC5000: + { + struct dvb_tuner_ops *xc_tuner_ops; + xc5000_cfg.i2c_address = t->i2c->addr; xc5000_cfg.if_khz = 5380; - xc5000_cfg.priv = c->adapter->algo_data; xc5000_cfg.tuner_callback = t->tuner_callback; - if (!xc5000_attach(&t->fe, t->i2c->adapter, &xc5000_cfg)) { - t->type = TUNER_ABSENT; - t->mode_mask = T_UNINITIALIZED; - return; - } - { - struct dvb_tuner_ops *xc_tuner_ops; + if (!dvb_attach(xc5000_attach, + &t->fe, t->i2c->adapter, &xc5000_cfg, + c->adapter->algo_data)) + goto attach_failed; + xc_tuner_ops = &t->fe.ops.tuner_ops; - if(xc_tuner_ops->init != NULL) + if (xc_tuner_ops->init) xc_tuner_ops->init(&t->fe); - } break; + } default: - attach_simple_tuner(t); + if (!dvb_attach(simple_tuner_attach, &t->fe, + t->i2c->adapter, t->i2c->addr, t->type)) + goto attach_failed; + break; } if ((NULL == analog_ops->set_params) && (fe_tuner_ops->set_analog_params)) { - strlcpy(t->i2c->name, fe_tuner_ops->info.name, - sizeof(t->i2c->name)); + + t->name = fe_tuner_ops->info.name; t->fe.analog_demod_priv = t; memcpy(analog_ops, &tuner_core_ops, sizeof(struct analog_demod_ops)); + } else { - strlcpy(t->i2c->name, analog_ops->info.name, - sizeof(t->i2c->name)); + t->name = analog_ops->info.name; } - tuner_dbg("type set to %s\n", t->i2c->name); + tuner_dbg("type set to %s\n", t->name); if (t->mode_mask == T_UNINITIALIZED) t->mode_mask = new_mode_mask; - set_freq(c, (V4L2_TUNER_RADIO == t->mode) ? t->radio_freq : t->tv_freq); + /* xc2028/3028 and xc5000 requires a firmware to be set-up later + trying to set a frequency here will just fail + FIXME: better to move set_freq to the tuner code. This is needed + on analog tuners for PLL to properly work + */ + if (t->type != TUNER_XC2028 && t->type != TUNER_XC5000) + set_freq(c, (V4L2_TUNER_RADIO == t->mode) ? + t->radio_freq : t->tv_freq); + tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n", c->adapter->name, c->driver->driver.name, c->addr << 1, type, t->mode_mask); tuner_i2c_address_check(t); + return; + +attach_failed: + tuner_dbg("Tuner attach for type = %d failed.\n", t->type); + t->type = TUNER_ABSENT; + t->mode_mask = T_UNINITIALIZED; + + return; } /* @@ -496,20 +521,22 @@ static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup) { struct tuner *t = i2c_get_clientdata(c); - tuner_dbg("set addr for type %i\n", t->type); - if ( (t->type == UNSET && ((tun_setup->addr == ADDR_UNSET) && (t->mode_mask & tun_setup->mode_mask))) || (tun_setup->addr == c->addr)) { set_type(c, tun_setup->type, tun_setup->mode_mask, tun_setup->config, tun_setup->tuner_callback); - } + } else + tuner_dbg("set addr discarded for type %i, mask %x. " + "Asked to change tuner at addr 0x%02x, with mask %x\n", + t->type, t->mode_mask, + tun_setup->addr, tun_setup->mode_mask); } static inline int check_mode(struct tuner *t, char *cmd) { if ((1 << t->mode & t->mode_mask) == 0) { - return EINVAL; + return -EINVAL; } switch (t->mode) { @@ -646,8 +673,8 @@ static void tuner_status(struct dvb_frontend *fe) { struct tuner *t = fe->analog_demod_priv; unsigned long freq, freq_fraction; - struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; - struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; + struct analog_demod_ops *analog_ops = &fe->ops.analog_ops; const char *p; switch (t->mode) { @@ -703,11 +730,11 @@ static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, t->mode = mode; - if (check_mode(t, cmd) == EINVAL) { + if (check_mode(t, cmd) == -EINVAL) { t->mode = T_STANDBY; if (analog_ops->standby) analog_ops->standby(&t->fe); - return EINVAL; + return -EINVAL; } return 0; } @@ -731,8 +758,10 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - if (tuner_debug>1) + if (tuner_debug > 1) { v4l_i2c_print_ioctl(client,cmd); + printk("\n"); + } switch (cmd) { /* --- configuration --- */ @@ -747,23 +776,23 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; case AUDC_SET_RADIO: if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO") - == EINVAL) + == -EINVAL) return 0; if (t->radio_freq) set_freq(client, t->radio_freq); break; case TUNER_SET_STANDBY: - if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL) + if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL) return 0; t->mode = T_STANDBY; if (analog_ops->standby) analog_ops->standby(&t->fe); break; -#ifdef CONFIG_VIDEO_V4L1 +#ifdef CONFIG_VIDEO_ALLOW_V4L1 case VIDIOCSAUDIO: - if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; /* Should be implemented, since bttv calls it */ @@ -781,10 +810,10 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) }; struct video_channel *vc = arg; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; - if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL) + if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) return 0; if (vc->norm < ARRAY_SIZE(map)) @@ -798,9 +827,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { unsigned long *v = arg; - if (check_mode(t, "VIDIOCSFREQ") == EINVAL) + if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; set_freq(client, *v); @@ -810,9 +839,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_tuner *vt = arg; - if (check_mode(t, "VIDIOCGTUNER") == EINVAL) + if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { @@ -854,9 +883,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_audio *va = arg; - if (check_mode(t, "VIDIOCGAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { @@ -896,7 +925,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) v4l2_std_id *id = arg; if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); @@ -912,7 +941,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_frequency *f = arg; if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); set_freq(client,f->frequency); @@ -923,7 +952,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL) + if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL) return 0; switch_v4l2(); f->type = t->mode; @@ -944,7 +973,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL) return 0; switch_v4l2(); @@ -991,7 +1020,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL) return 0; switch_v4l2(); @@ -1074,7 +1103,8 @@ static void tuner_lookup(struct i2c_adapter *adap, /* During client attach, set_type is called by adapter's attach_inform callback. set_type must then be completed by tuner_probe. */ -static int tuner_probe(struct i2c_client *client) +static int tuner_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct tuner *t; struct tuner *radio; @@ -1084,7 +1114,7 @@ static int tuner_probe(struct i2c_client *client) if (NULL == t) return -ENOMEM; t->i2c = client; - strlcpy(client->name, "(tuner unset)", sizeof(client->name)); + t->name = "(tuner unset)"; i2c_set_clientdata(client, t); t->type = UNSET; t->audmode = V4L2_TUNER_MODE_STEREO; @@ -1112,8 +1142,9 @@ static int tuner_probe(struct i2c_client *client) if (!no_autodetect) { switch (client->addr) { case 0x10: - if (tea5761_autodetection(t->i2c->adapter, t->i2c->addr) - != EINVAL) { + if (tuner_symbol_probe(tea5761_autodetection, + t->i2c->adapter, + t->i2c->addr) >= 0) { t->type = TUNER_TEA5761; t->mode_mask = T_RADIO; t->mode = T_STANDBY; @@ -1125,15 +1156,15 @@ static int tuner_probe(struct i2c_client *client) goto register_client; } - break; + return -ENODEV; case 0x42: case 0x43: case 0x4a: case 0x4b: /* If chip is not tda8290, don't register. since it can be tda9887*/ - if (tda829x_probe(t->i2c->adapter, - t->i2c->addr) == 0) { + if (tuner_symbol_probe(tda829x_probe, t->i2c->adapter, + t->i2c->addr) >= 0) { tuner_dbg("tda829x detected\n"); } else { /* Default is being tda9887 */ @@ -1145,8 +1176,9 @@ static int tuner_probe(struct i2c_client *client) } break; case 0x60: - if (tea5767_autodetection(t->i2c->adapter, t->i2c->addr) - != EINVAL) { + if (tuner_symbol_probe(tea5767_autodetection, + t->i2c->adapter, t->i2c->addr) + >= 0) { t->type = TUNER_TEA5767; t->mode_mask = T_RADIO; t->mode = T_STANDBY; @@ -1234,10 +1266,9 @@ static int tuner_legacy_probe(struct i2c_adapter *adap) static int tuner_remove(struct i2c_client *client) { struct tuner *t = i2c_get_clientdata(client); - struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - if (analog_ops->release) - analog_ops->release(&t->fe); + tuner_detach(&t->fe); + t->fe.analog_demod_priv = NULL; list_del(&t->list); kfree(t); @@ -1246,6 +1277,15 @@ static int tuner_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +/* This driver supports many devices and the idea is to let the driver + detect which device is present. So rather than listing all supported + devices here, we pretend to support a single, fake device type. */ +static const struct i2c_device_id tuner_id[] = { + { "tuner", }, /* autodetect */ + { } +}; +MODULE_DEVICE_TABLE(i2c, tuner_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "tuner", .driverid = I2C_DRIVERID_TUNER, @@ -1255,6 +1295,7 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .suspend = tuner_suspend, .resume = tuner_resume, .legacy_probe = tuner_legacy_probe, + .id_table = tuner_id, }; diff --git a/drivers/media/video/tuner-i2c.h b/drivers/media/video/tuner-i2c.h deleted file mode 100644 index de52e8ffd34..00000000000 --- a/drivers/media/video/tuner-i2c.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - tuner-i2c.h - i2c interface for different tuners - - Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef __TUNER_I2C_H__ -#define __TUNER_I2C_H__ - -#include <linux/i2c.h> - -struct tuner_i2c_props { - u8 addr; - struct i2c_adapter *adap; -}; - -static inline int tuner_i2c_xfer_send(struct tuner_i2c_props *props, char *buf, int len) -{ - struct i2c_msg msg = { .addr = props->addr, .flags = 0, - .buf = buf, .len = len }; - int ret = i2c_transfer(props->adap, &msg, 1); - - return (ret == 1) ? len : ret; -} - -static inline int tuner_i2c_xfer_recv(struct tuner_i2c_props *props, char *buf, int len) -{ - struct i2c_msg msg = { .addr = props->addr, .flags = I2C_M_RD, - .buf = buf, .len = len }; - int ret = i2c_transfer(props->adap, &msg, 1); - - return (ret == 1) ? len : ret; -} - -static inline int tuner_i2c_xfer_send_recv(struct tuner_i2c_props *props, - char *obuf, int olen, - char *ibuf, int ilen) -{ - struct i2c_msg msg[2] = { { .addr = props->addr, .flags = 0, - .buf = obuf, .len = olen }, - { .addr = props->addr, .flags = I2C_M_RD, - .buf = ibuf, .len = ilen } }; - int ret = i2c_transfer(props->adap, msg, 2); - - return (ret == 2) ? ilen : ret; -} - -#define tuner_warn(fmt, arg...) do { \ - printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(priv->i2c_props.adap), \ - priv->i2c_props.addr, ##arg); \ - } while (0) - -#define tuner_info(fmt, arg...) do { \ - printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(priv->i2c_props.adap), \ - priv->i2c_props.addr , ##arg); \ - } while (0) - -#define tuner_err(fmt, arg...) do { \ - printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(priv->i2c_props.adap), \ - priv->i2c_props.addr , ##arg); \ - } while (0) - -#define tuner_dbg(fmt, arg...) do { \ - if ((debug)) \ - printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(priv->i2c_props.adap), \ - priv->i2c_props.addr , ##arg); \ - } while (0) - -#endif /* __TUNER_I2C_H__ */ diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c deleted file mode 100644 index c1db576696c..00000000000 --- a/drivers/media/video/tuner-simple.c +++ /dev/null @@ -1,652 +0,0 @@ -/* - * i2c tv tuner chip device driver - * controls all those simple 4-control-bytes style tuners. - * - * This "tuner-simple" module was split apart from the original "tuner" module. - */ -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/videodev.h> -#include <media/tuner.h> -#include <media/v4l2-common.h> -#include <media/tuner-types.h> -#include "tuner-i2c.h" -#include "tuner-simple.h" - -static int debug = 0; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "enable verbose debug messages"); - -#define PREFIX "tuner-simple" - -static int offset = 0; -module_param(offset, int, 0664); -MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner"); - -/* ---------------------------------------------------------------------- */ - -/* tv standard selection for Temic 4046 FM5 - this value takes the low bits of control byte 2 - from datasheet Rev.01, Feb.00 - standard BG I L L2 D - picture IF 38.9 38.9 38.9 33.95 38.9 - sound 1 33.4 32.9 32.4 40.45 32.4 - sound 2 33.16 - NICAM 33.05 32.348 33.05 33.05 - */ -#define TEMIC_SET_PAL_I 0x05 -#define TEMIC_SET_PAL_DK 0x09 -#define TEMIC_SET_PAL_L 0x0a // SECAM ? -#define TEMIC_SET_PAL_L2 0x0b // change IF ! -#define TEMIC_SET_PAL_BG 0x0c - -/* tv tuner system standard selection for Philips FQ1216ME - this value takes the low bits of control byte 2 - from datasheet "1999 Nov 16" (supersedes "1999 Mar 23") - standard BG DK I L L` - picture carrier 38.90 38.90 38.90 38.90 33.95 - colour 34.47 34.47 34.47 34.47 38.38 - sound 1 33.40 32.40 32.90 32.40 40.45 - sound 2 33.16 - - - - - NICAM 33.05 33.05 32.35 33.05 39.80 - */ -#define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/ -#define PHILIPS_SET_PAL_BGDK 0x09 -#define PHILIPS_SET_PAL_L2 0x0a -#define PHILIPS_SET_PAL_L 0x0b - -/* system switching for Philips FI1216MF MK2 - from datasheet "1996 Jul 09", - standard BG L L' - picture carrier 38.90 38.90 33.95 - colour 34.47 34.37 38.38 - sound 1 33.40 32.40 40.45 - sound 2 33.16 - - - NICAM 33.05 33.05 39.80 - */ -#define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */ -#define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */ -#define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */ - -/* Control byte */ - -#define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */ -#define TUNER_RATIO_SELECT_50 0x00 -#define TUNER_RATIO_SELECT_32 0x02 -#define TUNER_RATIO_SELECT_166 0x04 -#define TUNER_RATIO_SELECT_62 0x06 - -#define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */ - -/* Status byte */ - -#define TUNER_POR 0x80 -#define TUNER_FL 0x40 -#define TUNER_MODE 0x38 -#define TUNER_AFC 0x07 -#define TUNER_SIGNAL 0x07 -#define TUNER_STEREO 0x10 - -#define TUNER_PLL_LOCKED 0x40 -#define TUNER_STEREO_MK3 0x04 - -struct tuner_simple_priv { - u16 last_div; - struct tuner_i2c_props i2c_props; - - unsigned int type; - struct tunertype *tun; - - u32 frequency; -}; - -/* ---------------------------------------------------------------------- */ - -static int tuner_read_status(struct dvb_frontend *fe) -{ - struct tuner_simple_priv *priv = fe->tuner_priv; - unsigned char byte; - - if (1 != tuner_i2c_xfer_recv(&priv->i2c_props,&byte,1)) - return 0; - - return byte; -} - -static inline int tuner_signal(const int status) -{ - return (status & TUNER_SIGNAL) << 13; -} - -static inline int tuner_stereo(const int type, const int status) -{ - switch (type) { - case TUNER_PHILIPS_FM1216ME_MK3: - case TUNER_PHILIPS_FM1236_MK3: - case TUNER_PHILIPS_FM1256_IH3: - case TUNER_LG_NTSC_TAPE: - return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); - default: - return status & TUNER_STEREO; - } -} - -static inline int tuner_islocked(const int status) -{ - return (status & TUNER_FL); -} - -static inline int tuner_afcstatus(const int status) -{ - return (status & TUNER_AFC) - 2; -} - - -static int simple_get_status(struct dvb_frontend *fe, u32 *status) -{ - struct tuner_simple_priv *priv = fe->tuner_priv; - int tuner_status = tuner_read_status(fe); - - *status = 0; - - if (tuner_islocked(tuner_status)) - *status = TUNER_STATUS_LOCKED; - if (tuner_stereo(priv->type, tuner_status)) - *status |= TUNER_STATUS_STEREO; - - tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status)); - - return 0; -} - -static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength) -{ - struct tuner_simple_priv *priv = fe->tuner_priv; - int signal = tuner_signal(tuner_read_status(fe)); - - *strength = signal; - - tuner_dbg("Signal strength: %d\n", signal); - - return 0; -} - -/* ---------------------------------------------------------------------- */ - -static int simple_set_tv_freq(struct dvb_frontend *fe, - struct analog_parameters *params) -{ - struct tuner_simple_priv *priv = fe->tuner_priv; - u8 config, cb, tuneraddr; - u16 div; - struct tunertype *tun; - u8 buffer[4]; - int rc, IFPCoff, i, j; - enum param_type desired_type; - struct tuner_params *t_params; - - tun = priv->tun; - - /* IFPCoff = Video Intermediate Frequency - Vif: - 940 =16*58.75 NTSC/J (Japan) - 732 =16*45.75 M/N STD - 704 =16*44 ATSC (at DVB code) - 632 =16*39.50 I U.K. - 622.4=16*38.90 B/G D/K I, L STD - 592 =16*37.00 D China - 590 =16.36.875 B Australia - 543.2=16*33.95 L' STD - 171.2=16*10.70 FM Radio (at set_radio_freq) - */ - - if (params->std == V4L2_STD_NTSC_M_JP) { - IFPCoff = 940; - desired_type = TUNER_PARAM_TYPE_NTSC; - } else if ((params->std & V4L2_STD_MN) && - !(params->std & ~V4L2_STD_MN)) { - IFPCoff = 732; - desired_type = TUNER_PARAM_TYPE_NTSC; - } else if (params->std == V4L2_STD_SECAM_LC) { - IFPCoff = 543; - desired_type = TUNER_PARAM_TYPE_SECAM; - } else { - IFPCoff = 623; - desired_type = TUNER_PARAM_TYPE_PAL; - } - - for (j = 0; j < tun->count-1; j++) { - if (desired_type != tun->params[j].type) - continue; - break; - } - /* use default tuner_t_params if desired_type not available */ - if (desired_type != tun->params[j].type) { - tuner_dbg("IFPCoff = %d: tuner_t_params undefined for tuner %d\n", - IFPCoff, priv->type); - j = 0; - } - t_params = &tun->params[j]; - - for (i = 0; i < t_params->count; i++) { - if (params->frequency > t_params->ranges[i].limit) - continue; - break; - } - if (i == t_params->count) { - tuner_dbg("TV frequency out of range (%d > %d)", - params->frequency, t_params->ranges[i - 1].limit); - params->frequency = t_params->ranges[--i].limit; - } - config = t_params->ranges[i].config; - cb = t_params->ranges[i].cb; - /* i == 0 -> VHF_LO - * i == 1 -> VHF_HI - * i == 2 -> UHF */ - tuner_dbg("tv: param %d, range %d\n",j,i); - - div=params->frequency + IFPCoff + offset; - - tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n", - params->frequency / 16, params->frequency % 16 * 100 / 16, - IFPCoff / 16, IFPCoff % 16 * 100 / 16, - offset / 16, offset % 16 * 100 / 16, - div); - - /* tv norm specific stuff for multi-norm tuners */ - switch (priv->type) { - case TUNER_PHILIPS_SECAM: // FI1216MF - /* 0x01 -> ??? no change ??? */ - /* 0x02 -> PAL BDGHI / SECAM L */ - /* 0x04 -> ??? PAL others / SECAM others ??? */ - cb &= ~0x03; - if (params->std & V4L2_STD_SECAM_L) //also valid for V4L2_STD_SECAM - cb |= PHILIPS_MF_SET_STD_L; - else if (params->std & V4L2_STD_SECAM_LC) - cb |= PHILIPS_MF_SET_STD_LC; - else /* V4L2_STD_B|V4L2_STD_GH */ - cb |= PHILIPS_MF_SET_STD_BG; - break; - - case TUNER_TEMIC_4046FM5: - cb &= ~0x0f; - - if (params->std & V4L2_STD_PAL_BG) { - cb |= TEMIC_SET_PAL_BG; - - } else if (params->std & V4L2_STD_PAL_I) { - cb |= TEMIC_SET_PAL_I; - - } else if (params->std & V4L2_STD_PAL_DK) { - cb |= TEMIC_SET_PAL_DK; - - } else if (params->std & V4L2_STD_SECAM_L) { - cb |= TEMIC_SET_PAL_L; - - } - break; - - case TUNER_PHILIPS_FQ1216ME: - cb &= ~0x0f; - - if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { - cb |= PHILIPS_SET_PAL_BGDK; - - } else if (params->std & V4L2_STD_PAL_I) { - cb |= PHILIPS_SET_PAL_I; - - } else if (params->std & V4L2_STD_SECAM_L) { - cb |= PHILIPS_SET_PAL_L; - - } - break; - - case TUNER_PHILIPS_ATSC: - /* 0x00 -> ATSC antenna input 1 */ - /* 0x01 -> ATSC antenna input 2 */ - /* 0x02 -> NTSC antenna input 1 */ - /* 0x03 -> NTSC antenna input 2 */ - cb &= ~0x03; - if (!(params->std & V4L2_STD_ATSC)) - cb |= 2; - /* FIXME: input */ - break; - - case TUNER_MICROTUNE_4042FI5: - /* Set the charge pump for fast tuning */ - config |= TUNER_CHARGE_PUMP; - break; - - case TUNER_PHILIPS_TUV1236D: - /* 0x40 -> ATSC antenna input 1 */ - /* 0x48 -> ATSC antenna input 2 */ - /* 0x00 -> NTSC antenna input 1 */ - /* 0x08 -> NTSC antenna input 2 */ - buffer[0] = 0x14; - buffer[1] = 0x00; - buffer[2] = 0x17; - buffer[3] = 0x00; - cb &= ~0x40; - if (params->std & V4L2_STD_ATSC) { - cb |= 0x40; - buffer[1] = 0x04; - } - /* set to the correct mode (analog or digital) */ - tuneraddr = priv->i2c_props.addr; - priv->i2c_props.addr = 0x0a; - if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[0],2))) - tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); - if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[2],2))) - tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); - priv->i2c_props.addr = tuneraddr; - /* FIXME: input */ - break; - } - - if (t_params->cb_first_if_lower_freq && div < priv->last_div) { - buffer[0] = config; - buffer[1] = cb; - buffer[2] = (div>>8) & 0x7f; - buffer[3] = div & 0xff; - } else { - buffer[0] = (div>>8) & 0x7f; - buffer[1] = div & 0xff; - buffer[2] = config; - buffer[3] = cb; - } - priv->last_div = div; - if (t_params->has_tda9887) { - struct v4l2_priv_tun_config tda9887_cfg; - int config = 0; - int is_secam_l = (params->std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) && - !(params->std & ~(V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)); - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &config; - - if (params->std == V4L2_STD_SECAM_LC) { - if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc) - config |= TDA9887_PORT1_ACTIVE; - if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc) - config |= TDA9887_PORT2_ACTIVE; - } - else { - if (t_params->port1_active) - config |= TDA9887_PORT1_ACTIVE; - if (t_params->port2_active) - config |= TDA9887_PORT2_ACTIVE; - } - if (t_params->intercarrier_mode) - config |= TDA9887_INTERCARRIER; - if (is_secam_l) { - if (i == 0 && t_params->default_top_secam_low) - config |= TDA9887_TOP(t_params->default_top_secam_low); - else if (i == 1 && t_params->default_top_secam_mid) - config |= TDA9887_TOP(t_params->default_top_secam_mid); - else if (t_params->default_top_secam_high) - config |= TDA9887_TOP(t_params->default_top_secam_high); - } - else { - if (i == 0 && t_params->default_top_low) - config |= TDA9887_TOP(t_params->default_top_low); - else if (i == 1 && t_params->default_top_mid) - config |= TDA9887_TOP(t_params->default_top_mid); - else if (t_params->default_top_high) - config |= TDA9887_TOP(t_params->default_top_high); - } - if (t_params->default_pll_gating_18) - config |= TDA9887_GATING_18; - i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, - &tda9887_cfg); - } - tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", - buffer[0],buffer[1],buffer[2],buffer[3]); - - if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4))) - tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); - - switch (priv->type) { - case TUNER_LG_TDVS_H06XF: - /* Set the Auxiliary Byte. */ - buffer[0] = buffer[2]; - buffer[0] &= ~0x20; - buffer[0] |= 0x18; - buffer[1] = 0x20; - tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]); - - if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,2))) - tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); - break; - case TUNER_MICROTUNE_4042FI5: - { - // FIXME - this may also work for other tuners - unsigned long timeout = jiffies + msecs_to_jiffies(1); - u8 status_byte = 0; - - /* Wait until the PLL locks */ - for (;;) { - if (time_after(jiffies,timeout)) - return 0; - if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,&status_byte,1))) { - tuner_warn("i2c i/o read error: rc == %d (should be 1)\n",rc); - break; - } - if (status_byte & TUNER_PLL_LOCKED) - break; - udelay(10); - } - - /* Set the charge pump for optimized phase noise figure */ - config &= ~TUNER_CHARGE_PUMP; - buffer[0] = (div>>8) & 0x7f; - buffer[1] = div & 0xff; - buffer[2] = config; - buffer[3] = cb; - tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", - buffer[0],buffer[1],buffer[2],buffer[3]); - - if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4))) - tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); - break; - } - } - return 0; -} - -static int simple_set_radio_freq(struct dvb_frontend *fe, - struct analog_parameters *params) -{ - struct tunertype *tun; - struct tuner_simple_priv *priv = fe->tuner_priv; - u8 buffer[4]; - u16 div; - int rc, j; - struct tuner_params *t_params; - unsigned int freq = params->frequency; - - tun = priv->tun; - - for (j = tun->count-1; j > 0; j--) - if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO) - break; - /* default t_params (j=0) will be used if desired type wasn't found */ - t_params = &tun->params[j]; - - /* Select Radio 1st IF used */ - switch (t_params->radio_if) { - case 0: /* 10.7 MHz */ - freq += (unsigned int)(10.7*16000); - break; - case 1: /* 33.3 MHz */ - freq += (unsigned int)(33.3*16000); - break; - case 2: /* 41.3 MHz */ - freq += (unsigned int)(41.3*16000); - break; - default: - tuner_warn("Unsupported radio_if value %d\n", t_params->radio_if); - return 0; - } - - /* Bandswitch byte */ - switch (priv->type) { - case TUNER_TENA_9533_DI: - case TUNER_YMEC_TVF_5533MF: - tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n"); - return 0; - case TUNER_PHILIPS_FM1216ME_MK3: - case TUNER_PHILIPS_FM1236_MK3: - case TUNER_PHILIPS_FMD1216ME_MK3: - case TUNER_LG_NTSC_TAPE: - case TUNER_PHILIPS_FM1256_IH3: - buffer[3] = 0x19; - break; - case TUNER_TNF_5335MF: - buffer[3] = 0x11; - break; - case TUNER_LG_PAL_FM: - buffer[3] = 0xa5; - break; - case TUNER_THOMSON_DTT761X: - buffer[3] = 0x39; - break; - case TUNER_MICROTUNE_4049FM5: - default: - buffer[3] = 0xa4; - break; - } - - buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) | - TUNER_RATIO_SELECT_50; /* 50 kHz step */ - - /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps - freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) = - freq * (1/800) */ - div = (freq + 400) / 800; - - if (t_params->cb_first_if_lower_freq && div < priv->last_div) { - buffer[0] = buffer[2]; - buffer[1] = buffer[3]; - buffer[2] = (div>>8) & 0x7f; - buffer[3] = div & 0xff; - } else { - buffer[0] = (div>>8) & 0x7f; - buffer[1] = div & 0xff; - } - - tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n", - buffer[0],buffer[1],buffer[2],buffer[3]); - priv->last_div = div; - - if (t_params->has_tda9887) { - int config = 0; - struct v4l2_priv_tun_config tda9887_cfg; - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &config; - - if (t_params->port1_active && !t_params->port1_fm_high_sensitivity) - config |= TDA9887_PORT1_ACTIVE; - if (t_params->port2_active && !t_params->port2_fm_high_sensitivity) - config |= TDA9887_PORT2_ACTIVE; - if (t_params->intercarrier_mode) - config |= TDA9887_INTERCARRIER; -/* if (t_params->port1_set_for_fm_mono) - config &= ~TDA9887_PORT1_ACTIVE;*/ - if (t_params->fm_gain_normal) - config |= TDA9887_GAIN_NORMAL; - if (t_params->radio_if == 2) - config |= TDA9887_RIF_41_3; - i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, - &tda9887_cfg); - } - if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4))) - tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); - - return 0; -} - -static int simple_set_params(struct dvb_frontend *fe, - struct analog_parameters *params) -{ - struct tuner_simple_priv *priv = fe->tuner_priv; - int ret = -EINVAL; - - switch (params->mode) { - case V4L2_TUNER_RADIO: - ret = simple_set_radio_freq(fe, params); - priv->frequency = params->frequency * 125 / 2; - break; - case V4L2_TUNER_ANALOG_TV: - case V4L2_TUNER_DIGITAL_TV: - ret = simple_set_tv_freq(fe, params); - priv->frequency = params->frequency * 62500; - break; - } - - return ret; -} - - -static int simple_release(struct dvb_frontend *fe) -{ - kfree(fe->tuner_priv); - fe->tuner_priv = NULL; - - return 0; -} - -static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency) -{ - struct tuner_simple_priv *priv = fe->tuner_priv; - *frequency = priv->frequency; - return 0; -} - -static struct dvb_tuner_ops simple_tuner_ops = { - .set_analog_params = simple_set_params, - .release = simple_release, - .get_frequency = simple_get_frequency, - .get_status = simple_get_status, - .get_rf_strength = simple_get_rf_strength, -}; - -struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c_adap, - u8 i2c_addr, - struct simple_tuner_config *cfg) -{ - struct tuner_simple_priv *priv = NULL; - - priv = kzalloc(sizeof(struct tuner_simple_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; - fe->tuner_priv = priv; - - priv->i2c_props.addr = i2c_addr; - priv->i2c_props.adap = i2c_adap; - priv->type = cfg->type; - priv->tun = cfg->tun; - - memcpy(&fe->ops.tuner_ops, &simple_tuner_ops, sizeof(struct dvb_tuner_ops)); - - tuner_info("type set to %d (%s)\n", cfg->type, cfg->tun->name); - - strlcpy(fe->ops.tuner_ops.info.name, cfg->tun->name, sizeof(fe->ops.tuner_ops.info.name)); - - return fe; -} - - -EXPORT_SYMBOL_GPL(simple_tuner_attach); - -MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver"); -MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); -MODULE_LICENSE("GPL"); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 01ebcec040c..c77914d99d1 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -38,7 +38,7 @@ /* ---------------------------------------------------------------------- */ /* insmod args */ -static int debug = 0; /* insmod parameter */ +static int debug; /* insmod parameter */ module_param(debug, int, 0644); MODULE_DESCRIPTION("device driver for various i2c TV sound decoder / audiomux chips"); @@ -1235,11 +1235,11 @@ static int tda9850 = 1; static int tda9855 = 1; static int tda9873 = 1; static int tda9874a = 1; -static int tea6300 = 0; /* address clash with msp34xx */ -static int tea6320 = 0; /* address clash with msp34xx */ +static int tea6300; /* default 0 - address clash with msp34xx */ +static int tea6320; /* default 0 - address clash with msp34xx */ static int tea6420 = 1; static int pic16c54 = 1; -static int ta8874z = 0; /* address clash with tda9840 */ +static int ta8874z; /* default 0 - address clash with tda9840 */ module_param(tda8425, int, 0444); module_param(tda9840, int, 0444); @@ -1461,7 +1461,7 @@ static struct CHIPDESC chiplist[] = { /* ---------------------------------------------------------------------- */ /* i2c registration */ -static int chip_probe(struct i2c_client *client) +static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct CHIPSTATE *chip; struct CHIPDESC *desc; @@ -1505,7 +1505,8 @@ static int chip_probe(struct i2c_client *client) } /* fill required data structures */ - strcpy(client->name, desc->name); + if (!id) + strlcpy(client->name, desc->name, I2C_NAME_SIZE); chip->type = desc-chiplist; chip->shadow.count = desc->registers+1; chip->prevmode = -1; @@ -1830,6 +1831,15 @@ static int chip_legacy_probe(struct i2c_adapter *adap) return 0; } +/* This driver supports many devices and the idea is to let the driver + detect which device is present. So rather than listing all supported + devices here, we pretend to support a single, fake device type. */ +static const struct i2c_device_id chip_id[] = { + { "tvaudio", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, chip_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "tvaudio", .driverid = I2C_DRIVERID_TVAUDIO, @@ -1837,6 +1847,7 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .probe = chip_probe, .remove = chip_remove, .legacy_probe = chip_legacy_probe, + .id_table = chip_id, }; /* diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index dc0da44a5af..9da0e1807ff 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -319,10 +319,12 @@ audioIC[] = {AUDIO_CHIP_INTERNAL, "CX25843"}, {AUDIO_CHIP_INTERNAL, "CX23418"}, {AUDIO_CHIP_INTERNAL, "CX23885"}, - /* 40-42 */ + /* 40-44 */ {AUDIO_CHIP_INTERNAL, "CX23888"}, {AUDIO_CHIP_INTERNAL, "SAA7131"}, {AUDIO_CHIP_INTERNAL, "CX23887"}, + {AUDIO_CHIP_INTERNAL, "SAA7164"}, + {AUDIO_CHIP_INTERNAL, "AU8522"}, }; /* This list is supplied by Hauppauge. Thanks! */ @@ -341,8 +343,10 @@ static const char *decoderIC[] = { "CX882", "TVP5150A", "CX25840", "CX25841", "CX25842", /* 30-34 */ "CX25843", "CX23418", "NEC61153", "CX23885", "CX23888", - /* 35-37 */ - "SAA7131", "CX25837", "CX23887" + /* 35-39 */ + "SAA7131", "CX25837", "CX23887", "CX23885A", "CX23887A", + /* 40-42 */ + "SAA7164", "CX23885B", "AU8522" }; static int hasRadioTuner(int tunerType) @@ -745,109 +749,6 @@ int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len) } EXPORT_SYMBOL(tveeprom_read); -/* ----------------------------------------------------------------------- */ -/* needed for ivtv.sf.net at the moment. Should go away in the long */ -/* run, just call the exported tveeprom_* directly, there is no point in */ -/* using the indirect way via i2c_driver->command() */ - -static unsigned short normal_i2c[] = { - 0xa0 >> 1, - I2C_CLIENT_END, -}; - -I2C_CLIENT_INSMOD; - -static struct i2c_driver i2c_driver_tveeprom; - -static int -tveeprom_command(struct i2c_client *client, - unsigned int cmd, - void *arg) -{ - struct tveeprom eeprom; - u32 *eeprom_props = arg; - u8 *buf; - - switch (cmd) { - case 0: - buf = kzalloc(256, GFP_KERNEL); - tveeprom_read(client, buf, 256); - tveeprom_hauppauge_analog(client, &eeprom, buf); - kfree(buf); - eeprom_props[0] = eeprom.tuner_type; - eeprom_props[1] = eeprom.tuner_formats; - eeprom_props[2] = eeprom.model; - eeprom_props[3] = eeprom.revision; - eeprom_props[4] = eeprom.has_radio; - break; - default: - return -EINVAL; - } - return 0; -} - -static int -tveeprom_detect_client(struct i2c_adapter *adapter, - int address, - int kind) -{ - struct i2c_client *client; - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (NULL == client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_tveeprom; - snprintf(client->name, sizeof(client->name), "tveeprom"); - i2c_attach_client(client); - - return 0; -} - -static int -tveeprom_attach_adapter(struct i2c_adapter *adapter) -{ - if (adapter->class & I2C_CLASS_TV_ANALOG) - return i2c_probe(adapter, &addr_data, tveeprom_detect_client); - return 0; -} - -static int -tveeprom_detach_client(struct i2c_client *client) -{ - int err; - - err = i2c_detach_client(client); - if (err < 0) - return err; - kfree(client); - return 0; -} - -static struct i2c_driver i2c_driver_tveeprom = { - .driver = { - .name = "tveeprom", - }, - .id = I2C_DRIVERID_TVEEPROM, - .attach_adapter = tveeprom_attach_adapter, - .detach_client = tveeprom_detach_client, - .command = tveeprom_command, -}; - -static int __init tveeprom_init(void) -{ - return i2c_add_driver(&i2c_driver_tveeprom); -} - -static void __exit tveeprom_exit(void) -{ - i2c_del_driver(&i2c_driver_tveeprom); -} - -module_init(tveeprom_init); -module_exit(tveeprom_exit); - /* * Local variables: * c-basic-offset: 8 diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index d28318cb2b8..6a3af1005f0 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -27,7 +27,7 @@ static unsigned short normal_i2c[] = { I2C_CLIENT_INSMOD; -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -1072,12 +1072,12 @@ static int tvp5150_detect_client(struct i2c_adapter *adapter, return 0; c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (c == 0) + if (!c) return -ENOMEM; memcpy(c, &client_template, sizeof(struct i2c_client)); core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL); - if (core == 0) { + if (!core) { kfree(c); return -ENOMEM; } diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index bd201397a2a..b4628874933 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -195,7 +195,8 @@ static int upd64031a_command(struct i2c_client *client, unsigned cmd, void *arg) /* i2c implementation */ -static int upd64031a_probe(struct i2c_client *client) +static int upd64031a_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct upd64031a_state *state; int i; @@ -227,6 +228,11 @@ static int upd64031a_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static const struct i2c_device_id upd64031a_id[] = { + { "upd64031a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, upd64031a_id); static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "upd64031a", @@ -234,4 +240,5 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .command = upd64031a_command, .probe = upd64031a_probe, .remove = upd64031a_remove, + .id_table = upd64031a_id, }; diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 2d9a88f70c8..9521ce004dc 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -172,7 +172,8 @@ static int upd64083_command(struct i2c_client *client, unsigned cmd, void *arg) /* i2c implementation */ -static int upd64083_probe(struct i2c_client *client) +static int upd64083_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct upd64083_state *state; int i; @@ -204,6 +205,11 @@ static int upd64083_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static const struct i2c_device_id upd64083_id[] = { + { "upd64083", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, upd64083_id); static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "upd64083", @@ -211,4 +217,5 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .command = upd64083_command, .probe = upd64083_probe, .remove = upd64083_remove, + .id_table = upd64083_id, }; diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index 14db95e10cf..59166b76010 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -121,7 +121,7 @@ static int init_model2_yb = -1; /* 01.01.08 - Added for RCA video in support -LO */ /* Settings for camera model 3 */ -static int init_model3_input = 0; +static int init_model3_input; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); @@ -802,6 +802,21 @@ static enum ParseState ibmcam_model2_320x240_parse_lines( return scan_Continue; } +/* + * ibmcam_model3_parse_lines() + * + * | Even lines | Odd Lines | + * -----------------------------------| + * |YYY........Y|UYVYUYVY.........UYVY| + * |YYY........Y|UYVYUYVY.........UYVY| + * |............|.....................| + * |YYY........Y|UYVYUYVY.........UYVY| + * |------------+---------------------| + * + * There is one (U, V) chroma pair for every four luma (Y) values. This + * function reads a pair of lines at a time and obtains missing chroma values + * from adjacent pixels. + */ static enum ParseState ibmcam_model3_parse_lines( struct uvd *uvd, struct usbvideo_frame *frame, @@ -816,6 +831,7 @@ static enum ParseState ibmcam_model3_parse_lines( const int ccm = 128; /* Color correction median - see below */ int i, u, v, rw, data_w=0, data_h=0, color_corr; static unsigned char lineBuffer[640*3]; + int line; color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1); @@ -869,15 +885,15 @@ static enum ParseState ibmcam_model3_parse_lines( return scan_NextFrame; } - /* Make sure there's enough data for the entire line */ - len = 3 * data_w; /* <y-data> <uv-data> */ + /* Make sure that lineBuffer can store two lines of data */ + len = 3 * data_w; /* <y-data> <uyvy-data> */ assert(len <= sizeof(lineBuffer)); - /* Make sure there's enough data for the entire line */ + /* Make sure there's enough data for two lines */ if (RingQueue_GetLength(&uvd->dp) < len) return scan_Out; - /* Suck one line out of the ring queue */ + /* Suck two lines of data out of the ring queue */ RingQueue_Dequeue(&uvd->dp, lineBuffer, len); data = lineBuffer; @@ -887,15 +903,23 @@ static enum ParseState ibmcam_model3_parse_lines( rw = (int)VIDEOSIZE_Y(frame->request) - (int)(frame->curline) - 1; RESTRICT_TO_RANGE(rw, 0, VIDEOSIZE_Y(frame->request)-1); - for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { - int y, rv, gv, bv; /* RGB components */ + /* Iterate over two lines. */ + for (line = 0; line < 2; line++) { + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { + int y; + int rv, gv, bv; /* RGB components */ - if (i < data_w) { - y = data[i]; /* Luminosity is the first line */ + if (i >= data_w) { + RGB24_PUTPIXEL(frame, i, rw, 0, 0, 0); + continue; + } + + /* first line is YYY...Y; second is UYVY...UYVY */ + y = data[(line == 0) ? i : (i*2 + 1)]; /* Apply static color correction */ - u = color[i*2] + hue_corr; - v = color[i*2 + 1] + hue2_corr; + u = color[(i/2)*4] + hue_corr; + v = color[(i/2)*4 + 2] + hue2_corr; /* Apply color correction */ if (color_corr != 0) { @@ -903,13 +927,21 @@ static enum ParseState ibmcam_model3_parse_lines( u = 128 + ((ccm + color_corr) * (u - 128)) / ccm; v = 128 + ((ccm + color_corr) * (v - 128)) / ccm; } - } else - y = 0, u = v = 128; - YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv); - RGB24_PUTPIXEL(frame, i, rw, rv, gv, bv); /* Done by deinterlacing now */ + + YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv); + RGB24_PUTPIXEL(frame, i, rw, rv, gv, bv); /* No deinterlacing */ + } + + /* Check for the end of requested data */ + if (rw == 0) + break; + + /* Prepare for the second line */ + rw--; + data = lineBuffer + data_w; } - frame->deinterlace = Deinterlace_FillEvenLines; + frame->deinterlace = Deinterlace_None; /* * Account for number of bytes that we wrote into output V4L frame. diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c index 719b17ce83f..1c180284ec6 100644 --- a/drivers/media/video/usbvideo/konicawc.c +++ b/drivers/media/video/usbvideo/konicawc.c @@ -57,11 +57,11 @@ static struct usbvideo *cams; static int debug; #define DEBUG(n, format, arg...) \ if (n <= debug) { \ - printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __FUNCTION__ , ## arg); \ + printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \ } #else #define DEBUG(n, arg...) -static const int debug = 0; +static const int debug; #endif diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index a2acba0bcc4..3d26a30abe1 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -46,11 +46,11 @@ static int debug; #define DEBUG(n, format, arg...) \ if (n <= debug) { \ - printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __FUNCTION__ , ## arg); \ + printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \ } #else #define DEBUG(n, arg...) -static const int debug = 0; +static const int debug; #endif #define DRIVER_VERSION "v0.01" @@ -210,7 +210,7 @@ static int qcm_stv_setb(struct usb_device *dev, u16 reg, u8 val) return ret; } -static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val) +static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val) { int ret; diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c index 95453c108d4..9544e644bf0 100644 --- a/drivers/media/video/usbvideo/ultracam.c +++ b/drivers/media/video/usbvideo/ultracam.c @@ -28,9 +28,9 @@ typedef struct { static struct usbvideo *cams = NULL; -static int debug = 0; +static int debug; -static int flags = 0; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */ +static int flags; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */ static const int min_canvasWidth = 8; static const int min_canvasHeight = 4; diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index 5d363be7bc7..4128ee20b64 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -522,14 +522,14 @@ void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode) struct usbvideo_frame *frame; int num_cell = 0; int scan_length = 0; - static int num_pass = 0; + static int num_pass; if (uvd == NULL) { - err("%s: uvd == NULL", __FUNCTION__); + err("%s: uvd == NULL", __func__); return; } if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) { - err("%s: uvd->curframe=%d.", __FUNCTION__, uvd->curframe); + err("%s: uvd->curframe=%d.", __func__, uvd->curframe); return; } @@ -630,15 +630,15 @@ EXPORT_SYMBOL(usbvideo_HexDump); static int usbvideo_ClientIncModCount(struct uvd *uvd) { if (uvd == NULL) { - err("%s: uvd == NULL", __FUNCTION__); + err("%s: uvd == NULL", __func__); return -EINVAL; } if (uvd->handle == NULL) { - err("%s: uvd->handle == NULL", __FUNCTION__); + err("%s: uvd->handle == NULL", __func__); return -EINVAL; } if (!try_module_get(uvd->handle->md_module)) { - err("%s: try_module_get() == 0", __FUNCTION__); + err("%s: try_module_get() == 0", __func__); return -ENODEV; } return 0; @@ -647,15 +647,15 @@ static int usbvideo_ClientIncModCount(struct uvd *uvd) static void usbvideo_ClientDecModCount(struct uvd *uvd) { if (uvd == NULL) { - err("%s: uvd == NULL", __FUNCTION__); + err("%s: uvd == NULL", __func__); return; } if (uvd->handle == NULL) { - err("%s: uvd->handle == NULL", __FUNCTION__); + err("%s: uvd->handle == NULL", __func__); return; } if (uvd->handle->md_module == NULL) { - err("%s: uvd->handle->md_module == NULL", __FUNCTION__); + err("%s: uvd->handle->md_module == NULL", __func__); return; } module_put(uvd->handle->md_module); @@ -675,13 +675,13 @@ int usbvideo_register( /* Check parameters for sanity */ if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) { - err("%s: Illegal call", __FUNCTION__); + err("%s: Illegal call", __func__); return -EINVAL; } /* Check registration callback - must be set! */ if (cbTbl->probe == NULL) { - err("%s: probe() is required!", __FUNCTION__); + err("%s: probe() is required!", __func__); return -EINVAL; } @@ -692,7 +692,7 @@ int usbvideo_register( return -ENOMEM; } dbg("%s: Allocated $%p (%d. bytes) for %d. cameras", - __FUNCTION__, cams, base_size, num_cams); + __func__, cams, base_size, num_cams); /* Copy callbacks, apply defaults for those that are not set */ memmove(&cams->cb, cbTbl, sizeof(cams->cb)); @@ -721,7 +721,7 @@ int usbvideo_register( up->user_data = kmalloc(up->user_size, GFP_KERNEL); if (up->user_data == NULL) { err("%s: Failed to allocate user_data (%d. bytes)", - __FUNCTION__, up->user_size); + __func__, up->user_size); while (i) { up = &cams->cam[--i]; kfree(up->user_data); @@ -730,7 +730,7 @@ int usbvideo_register( return -ENOMEM; } dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)", - __FUNCTION__, i, up->user_data, up->user_size); + __func__, i, up->user_data, up->user_size); } } @@ -776,19 +776,19 @@ void usbvideo_Deregister(struct usbvideo **pCams) int i; if (pCams == NULL) { - err("%s: pCams == NULL", __FUNCTION__); + err("%s: pCams == NULL", __func__); return; } cams = *pCams; if (cams == NULL) { - err("%s: cams == NULL", __FUNCTION__); + err("%s: cams == NULL", __func__); return; } - dbg("%s: Deregistering %s driver.", __FUNCTION__, cams->drvName); + dbg("%s: Deregistering %s driver.", __func__, cams->drvName); usb_deregister(&cams->usbdrv); - dbg("%s: Deallocating cams=$%p (%d. cameras)", __FUNCTION__, cams, cams->num_cameras); + dbg("%s: Deallocating cams=$%p (%d. cameras)", __func__, cams, cams->num_cameras); for (i=0; i < cams->num_cameras; i++) { struct uvd *up = &cams->cam[i]; int warning = 0; @@ -802,16 +802,16 @@ void usbvideo_Deregister(struct usbvideo **pCams) } if (warning) { err("%s: Warning: user_data=$%p user_size=%d.", - __FUNCTION__, up->user_data, up->user_size); + __func__, up->user_data, up->user_size); } else { dbg("%s: Freeing %d. $%p->user_data=$%p", - __FUNCTION__, i, up, up->user_data); + __func__, i, up, up->user_data); kfree(up->user_data); } } /* Whole array was allocated in one chunk */ dbg("%s: Freed %d uvd structures", - __FUNCTION__, cams->num_cameras); + __func__, cams->num_cameras); kfree(cams); *pCams = NULL; } @@ -846,7 +846,7 @@ static void usbvideo_Disconnect(struct usb_interface *intf) int i; if (uvd == NULL) { - err("%s($%p): Illegal call.", __FUNCTION__, intf); + err("%s($%p): Illegal call.", __func__, intf); return; } @@ -854,7 +854,7 @@ static void usbvideo_Disconnect(struct usb_interface *intf) usbvideo_ClientIncModCount(uvd); if (uvd->debug > 0) - info("%s(%p.)", __FUNCTION__, intf); + info("%s(%p.)", __func__, intf); mutex_lock(&uvd->lock); uvd->remove_pending = 1; /* Now all ISO data will be ignored */ @@ -870,10 +870,10 @@ static void usbvideo_Disconnect(struct usb_interface *intf) video_unregister_device(&uvd->vdev); if (uvd->debug > 0) - info("%s: Video unregistered.", __FUNCTION__); + info("%s: Video unregistered.", __func__); if (uvd->user) - info("%s: In use, disconnect pending.", __FUNCTION__); + info("%s: In use, disconnect pending.", __func__); else usbvideo_CameraRelease(uvd); mutex_unlock(&uvd->lock); @@ -895,7 +895,7 @@ static void usbvideo_Disconnect(struct usb_interface *intf) static void usbvideo_CameraRelease(struct uvd *uvd) { if (uvd == NULL) { - err("%s: Illegal call", __FUNCTION__); + err("%s: Illegal call", __func__); return; } @@ -946,7 +946,9 @@ static const struct file_operations usbvideo_fops = { .read = usbvideo_v4l_read, .mmap = usbvideo_v4l_mmap, .ioctl = usbvideo_v4l_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; static const struct video_device usbvideo_template = { @@ -1011,18 +1013,18 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) char tmp1[20], tmp2[20]; /* Buffers for printing */ if (uvd == NULL) { - err("%s: Illegal call.", __FUNCTION__); + err("%s: Illegal call.", __func__); return -EINVAL; } if (uvd->video_endp == 0) { - info("%s: No video endpoint specified; data pump disabled.", __FUNCTION__); + info("%s: No video endpoint specified; data pump disabled.", __func__); } if (uvd->paletteBits == 0) { - err("%s: No palettes specified!", __FUNCTION__); + err("%s: No palettes specified!", __func__); return -EINVAL; } if (uvd->defaultPalette == 0) { - info("%s: No default palette!", __FUNCTION__); + info("%s: No default palette!", __func__); } uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) * @@ -1032,19 +1034,19 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) if (uvd->debug > 0) { info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx", - __FUNCTION__, uvd->iface, uvd->video_endp, uvd->paletteBits); + __func__, uvd->iface, uvd->video_endp, uvd->paletteBits); } if (uvd->dev == NULL) { - err("%s: uvd->dev == NULL", __FUNCTION__); + err("%s: uvd->dev == NULL", __func__); return -EINVAL; } - uvd->vdev.dev=&(uvd->dev->dev); + uvd->vdev.dev = &uvd->dev->dev; if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { - err("%s: video_register_device failed", __FUNCTION__); + err("%s: video_register_device failed", __func__); return -EPIPE; } if (uvd->debug > 1) { - info("%s: video_register_device() successful", __FUNCTION__); + info("%s: video_register_device() successful", __func__); } info("%s on /dev/video%d: canvas=%s videosize=%s", @@ -1111,14 +1113,14 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) int i, errCode = 0; if (uvd->debug > 1) - info("%s($%p)", __FUNCTION__, dev); + info("%s($%p)", __func__, dev); if (0 < usbvideo_ClientIncModCount(uvd)) return -ENODEV; mutex_lock(&uvd->lock); if (uvd->user) { - err("%s: Someone tried to open an already opened device!", __FUNCTION__); + err("%s: Someone tried to open an already opened device!", __func__); errCode = -EBUSY; } else { /* Clear statistics */ @@ -1134,7 +1136,7 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE); if ((uvd->fbuf == NULL) || (!RingQueue_IsAllocated(&uvd->dp))) { - err("%s: Failed to allocate fbuf or dp", __FUNCTION__); + err("%s: Failed to allocate fbuf or dp", __func__); errCode = -ENOMEM; } else { /* Allocate all buffers */ @@ -1178,19 +1180,19 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) if (errCode == 0) { if (VALID_CALLBACK(uvd, setupOnOpen)) { if (uvd->debug > 1) - info("%s: setupOnOpen callback", __FUNCTION__); + info("%s: setupOnOpen callback", __func__); errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd); if (errCode < 0) { err("%s: setupOnOpen callback failed (%d.).", - __FUNCTION__, errCode); + __func__, errCode); } else if (uvd->debug > 1) { - info("%s: setupOnOpen callback successful", __FUNCTION__); + info("%s: setupOnOpen callback successful", __func__); } } if (errCode == 0) { uvd->settingsAdjusted = 0; if (uvd->debug > 1) - info("%s: Open succeeded.", __FUNCTION__); + info("%s: Open succeeded.", __func__); uvd->user++; file->private_data = uvd; } @@ -1200,7 +1202,7 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) if (errCode != 0) usbvideo_ClientDecModCount(uvd); if (uvd->debug > 0) - info("%s: Returning %d.", __FUNCTION__, errCode); + info("%s: Returning %d.", __func__, errCode); return errCode; } @@ -1223,7 +1225,7 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file) int i; if (uvd->debug > 1) - info("%s($%p)", __FUNCTION__, dev); + info("%s($%p)", __func__, dev); mutex_lock(&uvd->lock); GET_CALLBACK(uvd, stopDataPump)(uvd); @@ -1250,7 +1252,7 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file) usbvideo_ClientDecModCount(uvd); if (uvd->debug > 1) - info("%s: Completed.", __FUNCTION__); + info("%s: Completed.", __func__); file->private_data = NULL; return 0; } @@ -1504,7 +1506,7 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, return -EFAULT; if (uvd->debug >= 1) - info("%s: %Zd. bytes, noblock=%d.", __FUNCTION__, count, noblock); + info("%s: %Zd. bytes, noblock=%d.", __func__, count, noblock); mutex_lock(&uvd->lock); @@ -1551,7 +1553,7 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, */ if (frmx == -1) { if (uvd->defaultPalette == 0) { - err("%s: No default palette; don't know what to do!", __FUNCTION__); + err("%s: No default palette; don't know what to do!", __func__); count = -EFAULT; goto read_done; } @@ -1623,7 +1625,7 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, frame->seqRead_Index += count; if (uvd->debug >= 1) { err("%s: {copy} count used=%Zd, new seqRead_Index=%ld", - __FUNCTION__, count, frame->seqRead_Index); + __func__, count, frame->seqRead_Index); } /* Finally check if the frame is done with and "release" it */ @@ -1634,7 +1636,7 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, /* Mark it as available to be used again. */ uvd->frame[frmx].frameState = FrameState_Unused; if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) { - err("%s: usbvideo_NewFrame failed.", __FUNCTION__); + err("%s: usbvideo_NewFrame failed.", __func__); } } read_done: @@ -1741,10 +1743,10 @@ static int usbvideo_StartDataPump(struct uvd *uvd) int i, errFlag; if (uvd->debug > 1) - info("%s($%p)", __FUNCTION__, uvd); + info("%s($%p)", __func__, uvd); if (!CAMERA_IS_OPERATIONAL(uvd)) { - err("%s: Camera is not operational", __FUNCTION__); + err("%s: Camera is not operational", __func__); return -EFAULT; } uvd->curframe = -1; @@ -1752,14 +1754,14 @@ static int usbvideo_StartDataPump(struct uvd *uvd) /* Alternate interface 1 is is the biggest frame size */ i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive); if (i < 0) { - err("%s: usb_set_interface error", __FUNCTION__); + err("%s: usb_set_interface error", __func__); uvd->last_error = i; return -EBUSY; } if (VALID_CALLBACK(uvd, videoStart)) GET_CALLBACK(uvd, videoStart)(uvd); else - err("%s: videoStart not set", __FUNCTION__); + err("%s: videoStart not set", __func__); /* We double buffer the Iso lists */ for (i=0; i < USBVIDEO_NUMSBUF; i++) { @@ -1784,12 +1786,12 @@ static int usbvideo_StartDataPump(struct uvd *uvd) for (i=0; i < USBVIDEO_NUMSBUF; i++) { errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL); if (errFlag) - err("%s: usb_submit_isoc(%d) ret %d", __FUNCTION__, i, errFlag); + err("%s: usb_submit_isoc(%d) ret %d", __func__, i, errFlag); } uvd->streaming = 1; if (uvd->debug > 1) - info("%s: streaming=1 video_endp=$%02x", __FUNCTION__, uvd->video_endp); + info("%s: streaming=1 video_endp=$%02x", __func__, uvd->video_endp); return 0; } @@ -1811,14 +1813,14 @@ static void usbvideo_StopDataPump(struct uvd *uvd) return; if (uvd->debug > 1) - info("%s($%p)", __FUNCTION__, uvd); + info("%s($%p)", __func__, uvd); /* Unschedule all of the iso td's */ for (i=0; i < USBVIDEO_NUMSBUF; i++) { usb_kill_urb(uvd->sbuf[i].urb); } if (uvd->debug > 1) - info("%s: streaming=0", __FUNCTION__); + info("%s: streaming=0", __func__); uvd->streaming = 0; if (!uvd->remove_pending) { @@ -1826,12 +1828,12 @@ static void usbvideo_StopDataPump(struct uvd *uvd) if (VALID_CALLBACK(uvd, videoStop)) GET_CALLBACK(uvd, videoStop)(uvd); else - err("%s: videoStop not set", __FUNCTION__); + err("%s: videoStop not set", __func__); /* Set packet size to 0 */ j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive); if (j < 0) { - err("%s: usb_set_interface() error %d.", __FUNCTION__, j); + err("%s: usb_set_interface() error %d.", __func__, j); uvd->last_error = j; } } @@ -1955,12 +1957,12 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) struct usbvideo_frame *frame = &uvd->frame[frameNum]; if (uvd->debug >= 2) - info("%s($%p,%d.)", __FUNCTION__, uvd, frameNum); + info("%s($%p,%d.)", __func__, uvd, frameNum); switch (frame->frameState) { case FrameState_Unused: if (uvd->debug >= 2) - info("%s: FrameState_Unused", __FUNCTION__); + info("%s: FrameState_Unused", __func__); return -EINVAL; case FrameState_Ready: case FrameState_Grabbing: @@ -1970,7 +1972,7 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) redo: if (!CAMERA_IS_OPERATIONAL(uvd)) { if (uvd->debug >= 2) - info("%s: Camera is not operational (1)", __FUNCTION__); + info("%s: Camera is not operational (1)", __func__); return -EIO; } ntries = 0; @@ -1979,24 +1981,24 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) signalPending = signal_pending(current); if (!CAMERA_IS_OPERATIONAL(uvd)) { if (uvd->debug >= 2) - info("%s: Camera is not operational (2)", __FUNCTION__); + info("%s: Camera is not operational (2)", __func__); return -EIO; } assert(uvd->fbuf != NULL); if (signalPending) { if (uvd->debug >= 2) - info("%s: Signal=$%08x", __FUNCTION__, signalPending); + info("%s: Signal=$%08x", __func__, signalPending); if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) { usbvideo_TestPattern(uvd, 1, 0); uvd->curframe = -1; uvd->stats.frame_num++; if (uvd->debug >= 2) - info("%s: Forced test pattern screen", __FUNCTION__); + info("%s: Forced test pattern screen", __func__); return 0; } else { /* Standard answer: Interrupted! */ if (uvd->debug >= 2) - info("%s: Interrupted!", __FUNCTION__); + info("%s: Interrupted!", __func__); return -EINTR; } } else { @@ -2006,17 +2008,17 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) else if (VALID_CALLBACK(uvd, processData)) GET_CALLBACK(uvd, processData)(uvd, frame); else - err("%s: processData not set", __FUNCTION__); + err("%s: processData not set", __func__); } } while (frame->frameState == FrameState_Grabbing); if (uvd->debug >= 2) { info("%s: Grabbing done; state=%d. (%lu. bytes)", - __FUNCTION__, frame->frameState, frame->seqRead_Length); + __func__, frame->frameState, frame->seqRead_Length); } if (frame->frameState == FrameState_Error) { int ret = usbvideo_NewFrame(uvd, frameNum); if (ret < 0) { - err("%s: usbvideo_NewFrame() failed (%d.)", __FUNCTION__, ret); + err("%s: usbvideo_NewFrame() failed (%d.)", __func__, ret); return ret; } goto redo; @@ -2048,7 +2050,7 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) } frame->frameState = FrameState_Done_Hold; if (uvd->debug >= 2) - info("%s: Entered FrameState_Done_Hold state.", __FUNCTION__); + info("%s: Entered FrameState_Done_Hold state.", __func__); return 0; case FrameState_Done_Hold: @@ -2059,12 +2061,12 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) * it will be released back into the wild to roam freely. */ if (uvd->debug >= 2) - info("%s: FrameState_Done_Hold state.", __FUNCTION__); + info("%s: FrameState_Done_Hold state.", __func__); return 0; } /* Catch-all for other cases. We shall not be here. */ - err("%s: Invalid state %d.", __FUNCTION__, frame->frameState); + err("%s: Invalid state %d.", __func__, frame->frameState); frame->frameState = FrameState_Unused; return 0; } @@ -2160,7 +2162,7 @@ static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd, const int ccm = 128; /* Color correction median - see below */ if ((uvd == NULL) || (frame == NULL)) { - err("%s: Illegal call.", __FUNCTION__); + err("%s: Illegal call.", __func__); return; } adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index da1ba021110..17f542dfb36 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -48,7 +48,7 @@ // #define VICAM_DEBUG #ifdef VICAM_DEBUG -#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __FUNCTION__, lineno, ##args) +#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __func__, lineno, ##args) #define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args) #else #define DBG(fmn,args...) do {} while(0) @@ -70,12 +70,6 @@ #define VICAM_HEADER_SIZE 64 -#define clamp( x, l, h ) max_t( __typeof__( x ), \ - ( l ), \ - min_t( __typeof__( x ), \ - ( h ), \ - ( x ) ) ) - /* Not sure what all the bytes in these char * arrays do, but they're necessary to make * the camera work. @@ -1066,7 +1060,9 @@ static const struct file_operations vicam_fops = { .read = vicam_read, .mmap = vicam_mmap, .ioctl = vicam_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, }; diff --git a/drivers/media/video/usbvision/Makefile b/drivers/media/video/usbvision/Makefile index 9ac92a80c64..33871875094 100644 --- a/drivers/media/video/usbvision/Makefile +++ b/drivers/media/video/usbvision/Makefile @@ -3,3 +3,4 @@ usbvision-objs := usbvision-core.o usbvision-video.o usbvision-i2c.o usbvision- obj-$(CONFIG_VIDEO_USBVISION) += usbvision.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index 56775ab8b75..a9c5e5adba3 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -53,19 +53,21 @@ #include "usbvision.h" -static unsigned int core_debug = 0; +static unsigned int core_debug; module_param(core_debug,int,0644); MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); -static unsigned int force_testpattern = 0; +static unsigned int force_testpattern; module_param(force_testpattern,int,0644); MODULE_PARM_DESC(force_testpattern,"enable test pattern display [core]"); -static int adjustCompression = 1; // Set the compression to be adaptive +static int adjustCompression = 1; /* Set the compression to be adaptive */ module_param(adjustCompression, int, 0444); MODULE_PARM_DESC(adjustCompression, " Set the ADPCM compression for the device. Default: 1 (On)"); -static int SwitchSVideoInput = 0; // To help people with Black and White output with using s-video input. Some cables and input device are wired differently. +/* To help people with Black and White output with using s-video input. + * Some cables and input device are wired differently. */ +static int SwitchSVideoInput; module_param(SwitchSVideoInput, int, 0444); MODULE_PARM_DESC(SwitchSVideoInput, " Set the S-Video input. Some cables and input device are wired differently. Default: 0 (Off)"); @@ -82,8 +84,10 @@ MODULE_PARM_DESC(adjust_Y_Offset, "adjust Y offset display [core]"); #ifdef USBVISION_DEBUG - #define PDEBUG(level, fmt, args...) \ - if (core_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args) + #define PDEBUG(level, fmt, args...) { \ + if (core_debug & (level)) \ + info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + } #else #define PDEBUG(level, fmt, args...) do {} while(0) #endif @@ -384,7 +388,7 @@ int usbvision_scratch_alloc(struct usb_usbvision *usbvision) scratch_reset(usbvision); if(usbvision->scratch == NULL) { err("%s: unable to allocate %d bytes for scratch", - __FUNCTION__, scratch_buf_size); + __func__, scratch_buf_size); return -ENOMEM; } return 0; @@ -418,7 +422,7 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision, unsigned char *f; int num_cell = 0; int scan_length = 0; - static int num_pass = 0; + static int num_pass; if (usbvision == NULL) { printk(KERN_ERR "%s: usbvision == NULL\n", proc); @@ -493,7 +497,8 @@ int usbvision_decompress_alloc(struct usb_usbvision *usbvision) int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2; usbvision->IntraFrameBuffer = vmalloc_32(IFB_size); if (usbvision->IntraFrameBuffer == NULL) { - err("%s: unable to allocate %d for compr. frame buffer", __FUNCTION__, IFB_size); + err("%s: unable to allocate %d for compr. frame buffer", + __func__, IFB_size); return -ENOMEM; } return 0; @@ -1430,7 +1435,7 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision, } #if ENABLE_HEXDUMP if (totlen > 0) { - static int foo = 0; + static int foo; if (foo < 1) { printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen); usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen); @@ -1516,7 +1521,7 @@ static void usbvision_isocIrq(struct urb *urb) if(errCode) { err("%s: usb_submit_urb failed: error %d", - __FUNCTION__, errCode); + __func__, errCode); } return; @@ -1547,7 +1552,7 @@ int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg) 0, (__u16) reg, buffer, 1, HZ); if (errCode < 0) { - err("%s: failed: error %d", __FUNCTION__, errCode); + err("%s: failed: error %d", __func__, errCode); return errCode; } return buffer[0]; @@ -1575,7 +1580,7 @@ int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg, USB_RECIP_ENDPOINT, 0, (__u16) reg, &value, 1, HZ); if (errCode < 0) { - err("%s: failed: error %d", __FUNCTION__, errCode); + err("%s: failed: error %d", __func__, errCode); } return errCode; } @@ -1851,7 +1856,7 @@ int usbvision_set_output(struct usb_usbvision *usbvision, int width, 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ); if (errCode < 0) { - err("%s failed: error %d", __FUNCTION__, errCode); + err("%s failed: error %d", __func__, errCode); return errCode; } usbvision->curwidth = usbvision->stretch_width * UsbWidth; @@ -2237,7 +2242,7 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision) (__u16) USBVISION_DRM_PRM1, value, 8, HZ); if (rc < 0) { - err("%sERROR=%d", __FUNCTION__, rc); + err("%sERROR=%d", __func__, rc); return rc; } @@ -2486,7 +2491,7 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision) urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); if (urb == NULL) { - err("%s: usb_alloc_urb() failed", __FUNCTION__); + err("%s: usb_alloc_urb() failed", __func__); return -ENOMEM; } usbvision->sbuf[bufIdx].urb = urb; @@ -2520,13 +2525,13 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision) GFP_KERNEL); if (errCode) { err("%s: usb_submit_urb(%d) failed: error %d", - __FUNCTION__, bufIdx, errCode); + __func__, bufIdx, errCode); } } usbvision->streaming = Stream_Idle; PDEBUG(DBG_ISOC, "%s: streaming=1 usbvision->video_endp=$%02x", - __FUNCTION__, + __func__, usbvision->video_endp); return 0; } @@ -2560,7 +2565,7 @@ void usbvision_stop_isoc(struct usb_usbvision *usbvision) } - PDEBUG(DBG_ISOC, "%s: streaming=Stream_Off\n", __FUNCTION__); + PDEBUG(DBG_ISOC, "%s: streaming=Stream_Off\n", __func__); usbvision->streaming = Stream_Off; if (!usbvision->remove_pending) { @@ -2571,7 +2576,7 @@ void usbvision_stop_isoc(struct usb_usbvision *usbvision) usbvision->ifaceAlt); if (errCode < 0) { err("%s: usb_set_interface() failed: error %d", - __FUNCTION__, errCode); + __func__, errCode); usbvision->last_error = errCode; } regValue = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F; diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index aabc42cae9c..e2274d77ea2 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -40,13 +40,15 @@ #define DBG_I2C 1<<0 -static int i2c_debug = 0; +static int i2c_debug; module_param (i2c_debug, int, 0644); // debug_i2c_usb mode of the device driver MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); -#define PDEBUG(level, fmt, args...) \ - if (i2c_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args) +#define PDEBUG(level, fmt, args...) { \ + if (i2c_debug & (level)) \ + info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + } static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf, short len); diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index df52f8a6021..d97261ab430 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -97,10 +97,10 @@ USBVISION_DRIVER_VERSION_PATCHLEVEL) #ifdef USBVISION_DEBUG - #define PDEBUG(level, fmt, args...) \ + #define PDEBUG(level, fmt, args...) { \ if (video_debug & (level)) \ - info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ ,\ - ## args) + info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + } #else #define PDEBUG(level, fmt, args...) do {} while(0) #endif @@ -115,7 +115,7 @@ USBVISION_DRIVER_VERSION_PATCHLEVEL) /* sequential number of usbvision device */ -static int usbvision_nr = 0; +static int usbvision_nr; static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = { { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" }, @@ -135,7 +135,7 @@ static void usbvision_release(struct usb_usbvision *usbvision); /* Set the default format for ISOC endpoint */ static int isocMode = ISOC_MODE_COMPRESS; /* Set the default Debug Mode of the device driver */ -static int video_debug = 0; +static int video_debug; /* Set the default device to power on at startup */ static int PowerOnAtOpen = 1; /* Sequential Number of Video Device */ @@ -343,7 +343,7 @@ static void usbvision_create_sysfs(struct video_device *vdev) return; } while (0); - err("%s error: %d\n", __FUNCTION__, res); + err("%s error: %d\n", __func__, res); } static void usbvision_remove_sysfs(struct video_device *vdev) @@ -490,7 +490,7 @@ static int usbvision_v4l2_close(struct inode *inode, struct file *file) mutex_unlock(&usbvision->lock); if (usbvision->remove_pending) { - printk(KERN_INFO "%s: Final disconnect\n", __FUNCTION__); + printk(KERN_INFO "%s: Final disconnect\n", __func__); usbvision_release(usbvision); } @@ -522,7 +522,7 @@ static int vidioc_g_register (struct file *file, void *priv, errCode = usbvision_read_reg(usbvision, reg->reg&0xff); if (errCode < 0) { err("%s: VIDIOC_DBG_G_REGISTER failed: error %d", - __FUNCTION__, errCode); + __func__, errCode); return errCode; } reg->val = errCode; @@ -543,7 +543,7 @@ static int vidioc_s_register (struct file *file, void *priv, errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); if (errCode < 0) { err("%s: VIDIOC_DBG_S_REGISTER failed: error %d", - __FUNCTION__, errCode); + __func__, errCode); return errCode; } return 0; @@ -1102,7 +1102,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, int ret,i; struct usbvision_frame *frame; - PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __FUNCTION__, + PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __func__, (unsigned long)count, noblock); if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL)) @@ -1171,7 +1171,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, } PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld", - __FUNCTION__, + __func__, frame->index, frame->bytes_read, frame->scanlength); /* copy bytes to user space; we allow for partials reads */ @@ -1184,7 +1184,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, frame->bytes_read += count; PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld", - __FUNCTION__, + __func__, (unsigned long)count, frame->bytes_read); /* For now, forget the frame if it has not been read in one shot. */ @@ -1269,12 +1269,12 @@ static int usbvision_radio_open(struct inode *inode, struct file *file) (struct usb_usbvision *) video_get_drvdata(dev); int errCode = 0; - PDEBUG(DBG_IO, "%s:", __FUNCTION__); + PDEBUG(DBG_IO, "%s:", __func__); mutex_lock(&usbvision->lock); if (usbvision->user) { - err("%s: Someone tried to open an already opened USBVision Radio!", __FUNCTION__); + err("%s: Someone tried to open an already opened USBVision Radio!", __func__); errCode = -EBUSY; } else { @@ -1342,7 +1342,7 @@ static int usbvision_radio_close(struct inode *inode, struct file *file) mutex_unlock(&usbvision->lock); if (usbvision->remove_pending) { - printk(KERN_INFO "%s: Final disconnect\n", __FUNCTION__); + printk(KERN_INFO "%s: Final disconnect\n", __func__); usbvision_release(usbvision); } @@ -1507,7 +1507,7 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision, struct video_device *vdev; if (usb_dev == NULL) { - err("%s: usbvision->dev is not set", __FUNCTION__); + err("%s: usbvision->dev is not set", __func__); return NULL; } @@ -1759,7 +1759,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf, PDEBUG(DBG_PROBE, "model out of bounds %d",model); return -ENODEV; } - printk(KERN_INFO "%s: %s found\n", __FUNCTION__, + printk(KERN_INFO "%s: %s found\n", __func__, usbvision_device_data[model].ModelString); if (usbvision_device_data[model].Interface >= 0) { @@ -1771,20 +1771,20 @@ static int __devinit usbvision_probe(struct usb_interface *intf, if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) { err("%s: interface %d. has non-ISO endpoint!", - __FUNCTION__, ifnum); + __func__, ifnum); err("%s: Endpoint attributes %d", - __FUNCTION__, endpoint->bmAttributes); + __func__, endpoint->bmAttributes); return -ENODEV; } if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { err("%s: interface %d. has ISO OUT endpoint!", - __FUNCTION__, ifnum); + __func__, ifnum); return -ENODEV; } if ((usbvision = usbvision_alloc(dev)) == NULL) { - err("%s: couldn't allocate USBVision struct", __FUNCTION__); + err("%s: couldn't allocate USBVision struct", __func__); return -ENOMEM; } @@ -1868,7 +1868,7 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf) PDEBUG(DBG_PROBE, ""); if (usbvision == NULL) { - err("%s: usb_get_intfdata() failed", __FUNCTION__); + err("%s: usb_get_intfdata() failed", __func__); return; } usb_set_intfdata (intf, NULL); @@ -1891,7 +1891,7 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf) if (usbvision->user) { printk(KERN_INFO "%s: In use, disconnect pending\n", - __FUNCTION__); + __func__); wake_up_interruptible(&usbvision->wait_frame); wake_up_interruptible(&usbvision->wait_stream); } else { diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile new file mode 100644 index 00000000000..968c1994eda --- /dev/null +++ b/drivers/media/video/uvc/Makefile @@ -0,0 +1,3 @@ +uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \ + uvc_status.o uvc_isight.o +obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c new file mode 100644 index 00000000000..f0ee46d1554 --- /dev/null +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -0,0 +1,1256 @@ +/* + * uvc_ctrl.c -- USB Video Class driver - Controls + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <linux/vmalloc.h> +#include <linux/wait.h> +#include <asm/atomic.h> + +#include "uvcvideo.h" + +#define UVC_CTRL_NDATA 2 +#define UVC_CTRL_DATA_CURRENT 0 +#define UVC_CTRL_DATA_BACKUP 1 + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_control_info uvc_ctrls[] = { + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .index = 0, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .index = 1, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .index = 2, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .index = 3, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .index = 4, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .index = 8, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .index = 9, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .index = 10, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .index = 11, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .index = 1, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_GET_RES + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .index = 2, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .index = 3, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .index = 17, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .index = 12, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .index = 13, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .index = 7, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, +}; + +static struct uvc_menu_info power_line_frequency_controls[] = { + { 0, "Disabled" }, + { 1, "50 Hz" }, + { 2, "60 Hz" }, +}; + +static struct uvc_menu_info exposure_auto_controls[] = { + { 1, "Manual Mode" }, + { 2, "Auto Mode" }, + { 4, "Shutter Priority Mode" }, + { 8, "Aperture Priority Mode" }, +}; + +static struct uvc_control_mapping uvc_ctrl_mappings[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_HUE, + .name = "Hue", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_SHARPNESS, + .name = "Sharpness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAMMA, + .name = "Gamma", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_BACKLIGHT_COMPENSATION, + .name = "Backlight Compensation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAIN, + .name = "Gain", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .name = "Power Line Frequency", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .size = 2, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_ENUM, + .menu_info = power_line_frequency_controls, + .menu_count = ARRAY_SIZE(power_line_frequency_controls), + }, + { + .id = V4L2_CID_HUE_AUTO, + .name = "Hue, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_AUTO, + .name = "Exposure, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .size = 4, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_BITMASK, + .menu_info = exposure_auto_controls, + .menu_count = ARRAY_SIZE(exposure_auto_controls), + }, + { + .id = V4L2_CID_EXPOSURE_AUTO_PRIORITY, + .name = "Exposure, Auto Priority", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_ABSOLUTE, + .name = "Exposure (Absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .size = 32, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Temperature, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE, + .name = "White Balance Temperature", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Component, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .name = "White Balance Blue Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_RED_BALANCE, + .name = "White Balance Red Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 16, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_FOCUS_ABSOLUTE, + .name = "Focus (absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_FOCUS_AUTO, + .name = "Focus, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id) +{ + return ctrl->data + id * ctrl->info->size; +} + +static inline int uvc_get_bit(const __u8 *data, int bit) +{ + return (data[bit >> 3] >> (bit & 7)) & 1; +} + +/* Extract the bit string specified by mapping->offset and mapping->size + * from the little-endian data stored at 'data' and return the result as + * a signed 32bit integer. Sign extension will be performed if the mapping + * references a signed data type. + */ +static __s32 uvc_get_le_value(const __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __s32 value = 0; + __u8 mask; + + data += offset / 8; + offset &= 7; + mask = ((1LL << bits) - 1) << offset; + + for (; bits > 0; data++) { + __u8 byte = *data & mask; + value |= offset > 0 ? (byte >> offset) : (byte << (-offset)); + bits -= 8 - (offset > 0 ? offset : 0); + offset -= 8; + mask = (1 << bits) - 1; + } + + /* Sign-extend the value if needed */ + if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) + value |= -(value & (1 << (mapping->size - 1))); + + return value; +} + +/* Set the bit string specified by mapping->offset and mapping->size + * in the little-endian data stored at 'data' to the value 'value'. + */ +static void uvc_set_le_value(__s32 value, __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __u8 mask; + + data += offset / 8; + offset &= 7; + + for (; bits > 0; data++) { + mask = ((1LL << bits) - 1) << offset; + *data = (*data & ~mask) | ((value << offset) & mask); + value >>= offset ? offset : 8; + bits -= 8 - offset; + offset = 0; + } +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static const __u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING; +static const __u8 uvc_camera_guid[16] = UVC_GUID_UVC_CAMERA; +static const __u8 uvc_media_transport_input_guid[16] = + UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT; + +static int uvc_entity_match_guid(struct uvc_entity *entity, __u8 guid[16]) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case ITT_CAMERA: + return memcmp(uvc_camera_guid, guid, 16) == 0; + + case ITT_MEDIA_TRANSPORT_INPUT: + return memcmp(uvc_media_transport_input_guid, guid, 16) == 0; + + case VC_PROCESSING_UNIT: + return memcmp(uvc_processing_guid, guid, 16) == 0; + + case VC_EXTENSION_UNIT: + return memcmp(entity->extension.guidExtensionCode, + guid, 16) == 0; + + default: + return 0; + } +} + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static void __uvc_find_control(struct uvc_entity *entity, __u32 v4l2_id, + struct uvc_control_mapping **mapping, struct uvc_control **control, + int next) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *map; + unsigned int i; + + if (entity == NULL) + return; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + list_for_each_entry(map, &ctrl->info->mappings, list) { + if ((map->id == v4l2_id) && !next) { + *control = ctrl; + *mapping = map; + return; + } + + if ((*mapping == NULL || (*mapping)->id > map->id) && + (map->id > v4l2_id) && next) { + *control = ctrl; + *mapping = map; + } + } + } +} + +struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping) +{ + struct uvc_control *ctrl = NULL; + struct uvc_entity *entity; + int next = v4l2_id & V4L2_CTRL_FLAG_NEXT_CTRL; + + *mapping = NULL; + + /* Mask the query flags. */ + v4l2_id &= V4L2_CTRL_ID_MASK; + + /* Find the control. */ + __uvc_find_control(video->processing, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + + list_for_each_entry(entity, &video->iterms, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + list_for_each_entry(entity, &video->extensions, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + if (ctrl == NULL && !next) + uvc_trace(UVC_TRACE_CONTROL, "Control 0x%08x not found.\n", + v4l2_id); + + return ctrl; +} + +int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + __u8 data[8]; + int ret; + + ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping); + if (ctrl == NULL) + return -EINVAL; + + v4l2_ctrl->id = mapping->id; + v4l2_ctrl->type = mapping->v4l2_type; + strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name); + v4l2_ctrl->flags = 0; + + if (!(ctrl->info->flags & UVC_CONTROL_SET_CUR)) + v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + if (ctrl->info->flags & UVC_CONTROL_GET_DEF) { + if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->default_value = uvc_get_le_value(data, mapping); + } + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + v4l2_ctrl->minimum = 0; + v4l2_ctrl->maximum = mapping->menu_count - 1; + v4l2_ctrl->step = 1; + + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == v4l2_ctrl->default_value) { + v4l2_ctrl->default_value = i; + break; + } + } + + return 0; + } + + if (ctrl->info->flags & UVC_CONTROL_GET_MIN) { + if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->minimum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_MAX) { + if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->maximum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_RES) { + if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->step = uvc_get_le_value(data, mapping); + } + + return 0; +} + + +/* -------------------------------------------------------------------------- + * Control transactions + * + * To make extended set operations as atomic as the hardware allows, controls + * are handled using begin/commit/rollback operations. + * + * At the beginning of a set request, uvc_ctrl_begin should be called to + * initialize the request. This function acquires the control lock. + * + * When setting a control, the new value is stored in the control data field + * at position UVC_CTRL_DATA_CURRENT. The control is then marked as dirty for + * later processing. If the UVC and V4L2 control sizes differ, the current + * value is loaded from the hardware before storing the new value in the data + * field. + * + * After processing all controls in the transaction, uvc_ctrl_commit or + * uvc_ctrl_rollback must be called to apply the pending changes to the + * hardware or revert them. When applying changes, all controls marked as + * dirty will be modified in the UVC device, and the dirty flag will be + * cleared. When reverting controls, the control data field + * UVC_CTRL_DATA_CURRENT is reverted to its previous value + * (UVC_CTRL_DATA_BACKUP) for all dirty controls. Both functions release the + * control lock. + */ +int uvc_ctrl_begin(struct uvc_video_device *video) +{ + return mutex_lock_interruptible(&video->ctrl_mutex) ? -ERESTARTSYS : 0; +} + +static int uvc_ctrl_commit_entity(struct uvc_device *dev, + struct uvc_entity *entity, int rollback) +{ + struct uvc_control *ctrl; + unsigned int i; + int ret; + + if (entity == NULL) + return 0; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL || !ctrl->dirty) + continue; + + if (!rollback) + ret = uvc_query_ctrl(dev, SET_CUR, ctrl->entity->id, + dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + else + ret = 0; + + if (rollback || ret < 0) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + ctrl->info->size); + + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + ctrl->loaded = 0; + + ctrl->dirty = 0; + + if (ret < 0) + return ret; + } + + return 0; +} + +int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback) +{ + struct uvc_entity *entity; + int ret = 0; + + /* Find the control. */ + ret = uvc_ctrl_commit_entity(video->dev, video->processing, rollback); + if (ret < 0) + goto done; + + list_for_each_entry(entity, &video->iterms, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + + list_for_each_entry(entity, &video->extensions, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + +done: + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + return -EINVAL; + + if (!ctrl->loaded) { + ret = uvc_query_ctrl(video->dev, GET_CUR, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + xctrl->value = uvc_get_le_value( + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == xctrl->value) { + xctrl->value = i; + break; + } + } + } + + return 0; +} + +int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + s32 value = xctrl->value; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_SET_CUR) == 0) + return -EINVAL; + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + if (value < 0 || value >= mapping->menu_count) + return -EINVAL; + value = mapping->menu_info[value].value; + } + + if (!ctrl->loaded && (ctrl->info->size * 8) != mapping->size) { + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) { + memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + 0, ctrl->info->size); + } else { + ret = uvc_query_ctrl(video->dev, GET_CUR, + ctrl->entity->id, video->dev->intfnum, + ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + } + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + if (!ctrl->dirty) { + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + } + + uvc_set_le_value(value, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + ctrl->dirty = 1; + ctrl->modified = 1; + return 0; +} + +/* -------------------------------------------------------------------------- + * Dynamic controls + */ + +int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *xctrl, int set) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + unsigned int i, found = 0; + __u8 *data; + int ret; + + /* Find the extension unit. */ + list_for_each_entry(entity, &video->extensions, chain) { + if (entity->id == xctrl->unit) + break; + } + + if (entity->id != xctrl->unit) { + uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n", + xctrl->unit); + return -EINVAL; + } + + /* Find the control. */ + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + if (ctrl->info->selector == xctrl->selector) { + found = 1; + break; + } + } + + if (!found) { + uvc_trace(UVC_TRACE_CONTROL, + "Control " UVC_GUID_FORMAT "/%u not found.\n", + UVC_GUID_ARGS(entity->extension.guidExtensionCode), + xctrl->selector); + return -EINVAL; + } + + /* Validate control data size. */ + if (ctrl->info->size != xctrl->size) + return -EINVAL; + + if ((set && !(ctrl->info->flags & UVC_CONTROL_SET_CUR)) || + (!set && !(ctrl->info->flags & UVC_CONTROL_GET_CUR))) + return -EINVAL; + + if (mutex_lock_interruptible(&video->ctrl_mutex)) + return -ERESTARTSYS; + + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + xctrl->size); + data = uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT); + + if (set && copy_from_user(data, xctrl->data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + + ret = uvc_query_ctrl(video->dev, set ? SET_CUR : GET_CUR, xctrl->unit, + video->dev->intfnum, xctrl->selector, data, + xctrl->size); + if (ret < 0) + goto out; + + if (!set && copy_to_user(xctrl->data, data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + +out: + if (ret) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + xctrl->size); + + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Restore control values after resume, skipping controls that haven't been + * changed. + * + * TODO + * - Don't restore modified controls that are back to their default value. + * - Handle restore order (Auto-Exposure Mode should be restored before + * Exposure Time). + */ +int uvc_ctrl_resume_device(struct uvc_device *dev) +{ + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + int ret; + + /* Walk the entities list and restore controls when possible. */ + list_for_each_entry(entity, &dev->entities, list) { + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + + if (ctrl->info == NULL || !ctrl->modified || + (ctrl->info->flags & UVC_CONTROL_RESTORE) == 0) + continue; + + printk(KERN_INFO "restoring control " UVC_GUID_FORMAT + "/%u/%u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->index, ctrl->info->selector); + ctrl->dirty = 1; + } + + ret = uvc_ctrl_commit_entity(dev, entity, 0); + if (ret < 0) + return ret; + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Control and mapping handling + */ + +static void uvc_ctrl_add_ctrl(struct uvc_device *dev, + struct uvc_control_info *info) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + int ret, found = 0; + unsigned int i; + + list_for_each_entry(entity, &dev->entities, list) { + if (!uvc_entity_match_guid(entity, info->entity)) + continue; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->index == info->index) { + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) + return; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + /* Check if the device control information and length match + * the user supplied information. + */ + __u32 flags; + __le16 size; + __u8 inf; + + if ((ret = uvc_query_ctrl(dev, GET_LEN, ctrl->entity->id, + dev->intfnum, info->selector, (__u8 *)&size, 2)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + if (info->size != le16_to_cpu(size)) { + uvc_trace(UVC_TRACE_CONTROL, "Control " UVC_GUID_FORMAT + "/%u size doesn't match user supplied " + "value.\n", UVC_GUID_ARGS(info->entity), + info->selector); + return; + } + + if ((ret = uvc_query_ctrl(dev, GET_INFO, ctrl->entity->id, + dev->intfnum, info->selector, &inf, 1)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + flags = info->flags; + if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) || + ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u flags don't match " + "supported operations.\n", + UVC_GUID_ARGS(info->entity), info->selector); + return; + } + } + + ctrl->info = info; + ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_NDATA, GFP_KERNEL); + uvc_trace(UVC_TRACE_CONTROL, "Added control " UVC_GUID_FORMAT "/%u " + "to device %s entity %u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->selector, dev->udev->devpath, entity->id); +} + +/* + * Add an item to the UVC control information list, and instantiate a control + * structure for each device that supports the control. + */ +int uvc_ctrl_add_info(struct uvc_control_info *info) +{ + struct uvc_control_info *ctrl; + struct uvc_device *dev; + int ret = 0; + + /* Find matching controls by walking the devices, entities and + * controls list. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + + /* First check if the list contains a control matching the new one. + * Bail out if it does. + */ + list_for_each_entry(ctrl, &uvc_driver.controls, list) { + if (memcmp(ctrl->entity, info->entity, 16)) + continue; + + if (ctrl->selector == info->selector) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u is already defined.\n", + UVC_GUID_ARGS(info->entity), info->selector); + ret = -EEXIST; + goto end; + } + if (ctrl->index == info->index) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u would overwrite index " + "%d.\n", UVC_GUID_ARGS(info->entity), + info->selector, info->index); + ret = -EEXIST; + goto end; + } + } + + list_for_each_entry(dev, &uvc_driver.devices, list) + uvc_ctrl_add_ctrl(dev, info); + + INIT_LIST_HEAD(&info->mappings); + list_add_tail(&info->list, &uvc_driver.controls); +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping) +{ + struct uvc_control_info *info; + struct uvc_control_mapping *map; + int ret = -EINVAL; + + if (mapping->id & ~V4L2_CTRL_ID_MASK) { + uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s' with " + "invalid control id 0x%08x\n", mapping->name, + mapping->id); + return -EINVAL; + } + + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) { + if (memcmp(info->entity, mapping->entity, 16) || + info->selector != mapping->selector) + continue; + + if (info->size * 8 < mapping->size + mapping->offset) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' would " + "overflow control " UVC_GUID_FORMAT "/%u\n", + mapping->name, UVC_GUID_ARGS(info->entity), + info->selector); + ret = -EOVERFLOW; + goto end; + } + + /* Check if the list contains a mapping matching the new one. + * Bail out if it does. + */ + list_for_each_entry(map, &info->mappings, list) { + if (map->id == mapping->id) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' is " + "already defined.\n", mapping->name); + ret = -EEXIST; + goto end; + } + } + + mapping->ctrl = info; + list_add_tail(&mapping->list, &info->mappings); + uvc_trace(UVC_TRACE_CONTROL, "Adding mapping %s to control " + UVC_GUID_FORMAT "/%u.\n", mapping->name, + UVC_GUID_ARGS(info->entity), info->selector); + + ret = 0; + break; + } +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +/* + * Initialize device controls. + */ +int uvc_ctrl_init_device(struct uvc_device *dev) +{ + struct uvc_control_info *info; + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + + /* Walk the entities list and instantiate controls */ + list_for_each_entry(entity, &dev->entities, list) { + unsigned int bControlSize = 0, ncontrols = 0; + __u8 *bmControls = NULL; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + bmControls = entity->extension.bmControls; + bControlSize = entity->extension.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == VC_PROCESSING_UNIT) { + bmControls = entity->processing.bmControls; + bControlSize = entity->processing.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == ITT_CAMERA) { + bmControls = entity->camera.bmControls; + bControlSize = entity->camera.bControlSize; + } + + for (i = 0; i < bControlSize; ++i) + ncontrols += hweight8(bmControls[i]); + + if (ncontrols == 0) + continue; + + entity->controls = kzalloc(ncontrols*sizeof *ctrl, GFP_KERNEL); + if (entity->controls == NULL) + return -ENOMEM; + + entity->ncontrols = ncontrols; + + ctrl = entity->controls; + for (i = 0; i < bControlSize * 8; ++i) { + if (uvc_get_bit(bmControls, i) == 0) + continue; + + ctrl->entity = entity; + ctrl->index = i; + ctrl++; + } + } + + /* Walk the controls info list and associate them with the device + * controls, then add the device to the global device list. This has + * to be done while holding the controls lock, to make sure + * uvc_ctrl_add_info() will not get called in-between. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) + uvc_ctrl_add_ctrl(dev, info); + + list_add_tail(&dev->list, &uvc_driver.devices); + mutex_unlock(&uvc_driver.ctrl_mutex); + + return 0; +} + +/* + * Cleanup device controls. + */ +void uvc_ctrl_cleanup_device(struct uvc_device *dev) +{ + struct uvc_entity *entity; + unsigned int i; + + /* Remove the device from the global devices list */ + mutex_lock(&uvc_driver.ctrl_mutex); + if (dev->list.next != NULL) + list_del(&dev->list); + mutex_unlock(&uvc_driver.ctrl_mutex); + + list_for_each_entry(entity, &dev->entities, list) { + for (i = 0; i < entity->ncontrols; ++i) + kfree(entity->controls[i].data); + + kfree(entity->controls); + } +} + +void uvc_ctrl_init(void) +{ + struct uvc_control_info *ctrl = uvc_ctrls; + struct uvc_control_info *cend = ctrl + ARRAY_SIZE(uvc_ctrls); + struct uvc_control_mapping *mapping = uvc_ctrl_mappings; + struct uvc_control_mapping *mend = + mapping + ARRAY_SIZE(uvc_ctrl_mappings); + + for (; ctrl < cend; ++ctrl) + uvc_ctrl_add_info(ctrl); + + for (; mapping < mend; ++mapping) + uvc_ctrl_add_mapping(mapping); +} diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c new file mode 100644 index 00000000000..60ced589f89 --- /dev/null +++ b/drivers/media/video/uvc/uvc_driver.c @@ -0,0 +1,1955 @@ +/* + * uvc_driver.c -- USB Video Class driver + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +/* + * This driver aims to support video input devices compliant with the 'USB + * Video Class' specification. + * + * The driver doesn't support the deprecated v4l1 interface. It implements the + * mmap capture method only, and doesn't do any image format conversion in + * software. If your user-space application doesn't support YUYV or MJPEG, fix + * it :-). Please note that the MJPEG data have been stripped from their + * Huffman tables (DHT marker), you will need to add it back if your JPEG + * codec can't handle MJPEG data. + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <linux/vmalloc.h> +#include <linux/wait.h> +#include <asm/atomic.h> + +#include <media/v4l2-common.h> + +#include "uvcvideo.h" + +#define DRIVER_AUTHOR "Laurent Pinchart <laurent.pinchart@skynet.be>" +#define DRIVER_DESC "USB Video Class driver" +#ifndef DRIVER_VERSION +#define DRIVER_VERSION "v0.1.0" +#endif + +static unsigned int uvc_quirks_param; +unsigned int uvc_trace_param; + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_format_desc uvc_fmts[] = { + { + .name = "YUV 4:2:2 (YUYV)", + .guid = UVC_GUID_FORMAT_YUY2, + .fcc = V4L2_PIX_FMT_YUYV, + }, + { + .name = "YUV 4:2:0 (NV12)", + .guid = UVC_GUID_FORMAT_NV12, + .fcc = V4L2_PIX_FMT_NV12, + }, + { + .name = "MJPEG", + .guid = UVC_GUID_FORMAT_MJPEG, + .fcc = V4L2_PIX_FMT_MJPEG, + }, + { + .name = "YVU 4:2:0 (YV12)", + .guid = UVC_GUID_FORMAT_YV12, + .fcc = V4L2_PIX_FMT_YVU420, + }, + { + .name = "YUV 4:2:0 (I420)", + .guid = UVC_GUID_FORMAT_I420, + .fcc = V4L2_PIX_FMT_YUV420, + }, + { + .name = "YUV 4:2:2 (UYVY)", + .guid = UVC_GUID_FORMAT_UYVY, + .fcc = V4L2_PIX_FMT_UYVY, + }, + { + .name = "Greyscale", + .guid = UVC_GUID_FORMAT_Y800, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "RGB Bayer", + .guid = UVC_GUID_FORMAT_BY8, + .fcc = V4L2_PIX_FMT_SBGGR8, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts, + __u8 epaddr) +{ + struct usb_host_endpoint *ep; + unsigned int i; + + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + ep = &alts->endpoint[i]; + if (ep->desc.bEndpointAddress == epaddr) + return ep; + } + + return NULL; +} + +static struct uvc_format_desc *uvc_format_by_guid(const __u8 guid[16]) +{ + unsigned int len = ARRAY_SIZE(uvc_fmts); + unsigned int i; + + for (i = 0; i < len; ++i) { + if (memcmp(guid, uvc_fmts[i].guid, 16) == 0) + return &uvc_fmts[i]; + } + + return NULL; +} + +static __u32 uvc_colorspace(const __u8 primaries) +{ + static const __u8 colorprimaries[] = { + 0, + V4L2_COLORSPACE_SRGB, + V4L2_COLORSPACE_470_SYSTEM_M, + V4L2_COLORSPACE_470_SYSTEM_BG, + V4L2_COLORSPACE_SMPTE170M, + V4L2_COLORSPACE_SMPTE240M, + }; + + if (primaries < ARRAY_SIZE(colorprimaries)) + return colorprimaries[primaries]; + + return 0; +} + +/* Simplify a fraction using a simple continued fraction decomposition. The + * idea here is to convert fractions such as 333333/10000000 to 1/30 using + * 32 bit arithmetic only. The algorithm is not perfect and relies upon two + * arbitrary parameters to remove non-significative terms from the simple + * continued fraction decomposition. Using 8 and 333 for n_terms and threshold + * respectively seems to give nice results. + */ +void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold) +{ + uint32_t *an; + uint32_t x, y, r; + unsigned int i, n; + + an = kmalloc(n_terms * sizeof *an, GFP_KERNEL); + if (an == NULL) + return; + + /* Convert the fraction to a simple continued fraction. See + * http://mathforum.org/dr.math/faq/faq.fractions.html + * Stop if the current term is bigger than or equal to the given + * threshold. + */ + x = *numerator; + y = *denominator; + + for (n = 0; n < n_terms && y != 0; ++n) { + an[n] = x / y; + if (an[n] >= threshold) { + if (n < 2) + n++; + break; + } + + r = x - an[n] * y; + x = y; + y = r; + } + + /* Expand the simple continued fraction back to an integer fraction. */ + x = 0; + y = 1; + + for (i = n; i > 0; --i) { + r = y; + y = an[i-1] * y + x; + x = r; + } + + *numerator = y; + *denominator = x; + kfree(an); +} + +/* Convert a fraction to a frame interval in 100ns multiples. The idea here is + * to compute numerator / denominator * 10000000 using 32 bit fixed point + * arithmetic only. + */ +uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator) +{ + uint32_t multiplier; + + /* Saturate the result if the operation would overflow. */ + if (denominator == 0 || + numerator/denominator >= ((uint32_t)-1)/10000000) + return (uint32_t)-1; + + /* Divide both the denominator and the multiplier by two until + * numerator * multiplier doesn't overflow. If anyone knows a better + * algorithm please let me know. + */ + multiplier = 10000000; + while (numerator > ((uint32_t)-1)/multiplier) { + multiplier /= 2; + denominator /= 2; + } + + return denominator ? numerator * multiplier / denominator : 0; +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id) +{ + struct uvc_entity *entity; + + list_for_each_entry(entity, &dev->entities, list) { + if (entity->id == id) + return entity; + } + + return NULL; +} + +static struct uvc_entity *uvc_entity_by_reference(struct uvc_device *dev, + int id, struct uvc_entity *entity) +{ + unsigned int i; + + if (entity == NULL) + entity = list_entry(&dev->entities, struct uvc_entity, list); + + list_for_each_entry_continue(entity, &dev->entities, list) { + switch (UVC_ENTITY_TYPE(entity)) { + case TT_STREAMING: + if (entity->output.bSourceID == id) + return entity; + break; + + case VC_PROCESSING_UNIT: + if (entity->processing.bSourceID == id) + return entity; + break; + + case VC_SELECTOR_UNIT: + for (i = 0; i < entity->selector.bNrInPins; ++i) + if (entity->selector.baSourceID[i] == id) + return entity; + break; + + case VC_EXTENSION_UNIT: + for (i = 0; i < entity->extension.bNrInPins; ++i) + if (entity->extension.baSourceID[i] == id) + return entity; + break; + } + } + + return NULL; +} + +/* ------------------------------------------------------------------------ + * Descriptors handling + */ + +static int uvc_parse_format(struct uvc_device *dev, + struct uvc_streaming *streaming, struct uvc_format *format, + __u32 **intervals, unsigned char *buffer, int buflen) +{ + struct usb_interface *intf = streaming->intf; + struct usb_host_interface *alts = intf->cur_altsetting; + struct uvc_format_desc *fmtdesc; + struct uvc_frame *frame; + const unsigned char *start = buffer; + unsigned int interval; + unsigned int i, n; + __u8 ftype; + + format->type = buffer[2]; + format->index = buffer[3]; + + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_FRAME_BASED: + if (buflen < 27) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Find the format descriptor from its GUID. */ + fmtdesc = uvc_format_by_guid(&buffer[5]); + + if (fmtdesc != NULL) { + strncpy(format->name, fmtdesc->name, + sizeof format->name); + format->fcc = fmtdesc->fcc; + } else { + uvc_printk(KERN_INFO, "Unknown video format " + UVC_GUID_FORMAT "\n", + UVC_GUID_ARGS(&buffer[5])); + snprintf(format->name, sizeof format->name, + UVC_GUID_FORMAT, UVC_GUID_ARGS(&buffer[5])); + format->fcc = 0; + } + + format->bpp = buffer[21]; + if (buffer[2] == VS_FORMAT_UNCOMPRESSED) { + ftype = VS_FRAME_UNCOMPRESSED; + } else { + ftype = VS_FRAME_FRAME_BASED; + if (buffer[27]) + format->flags = UVC_FMT_FLAG_COMPRESSED; + } + break; + + case VS_FORMAT_MJPEG: + if (buflen < 11) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + strncpy(format->name, "MJPEG", sizeof format->name); + format->fcc = V4L2_PIX_FMT_MJPEG; + format->flags = UVC_FMT_FLAG_COMPRESSED; + format->bpp = 0; + ftype = VS_FRAME_MJPEG; + break; + + case VS_FORMAT_DV: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + switch (buffer[8] & 0x7f) { + case 0: + strncpy(format->name, "SD-DV", sizeof format->name); + break; + case 1: + strncpy(format->name, "SDL-DV", sizeof format->name); + break; + case 2: + strncpy(format->name, "HD-DV", sizeof format->name); + break; + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d: unknown DV format %u\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, buffer[8]); + return -EINVAL; + } + + strncat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz", + sizeof format->name); + + format->fcc = V4L2_PIX_FMT_DV; + format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM; + format->bpp = 0; + ftype = 0; + + /* Create a dummy frame descriptor. */ + frame = &format->frame[0]; + memset(&format->frame[0], 0, sizeof format->frame[0]); + frame->bFrameIntervalType = 1; + frame->dwDefaultFrameInterval = 1; + frame->dwFrameInterval = *intervals; + *(*intervals)++ = 1; + format->nframes = 1; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + /* Not supported yet. */ + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d unsupported format %u\n", + dev->udev->devnum, alts->desc.bInterfaceNumber, + buffer[2]); + return -EINVAL; + } + + uvc_trace(UVC_TRACE_DESCR, "Found format %s.\n", format->name); + + buflen -= buffer[0]; + buffer += buffer[0]; + + /* Parse the frame descriptors. Only uncompressed, MJPEG and frame + * based formats have frame descriptors. + */ + while (buflen > 2 && buffer[2] == ftype) { + frame = &format->frame[format->nframes]; + + if (ftype != VS_FRAME_FRAME_BASED) + n = buflen > 25 ? buffer[25] : 0; + else + n = buflen > 21 ? buffer[21] : 0; + + n = n ? n : 3; + + if (buflen < 26 + 4*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FRAME error\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + frame->bFrameIndex = buffer[3]; + frame->bmCapabilities = buffer[4]; + frame->wWidth = le16_to_cpup((__le16 *)&buffer[5]); + frame->wHeight = le16_to_cpup((__le16 *)&buffer[7]); + frame->dwMinBitRate = le32_to_cpup((__le32 *)&buffer[9]); + frame->dwMaxBitRate = le32_to_cpup((__le32 *)&buffer[13]); + if (ftype != VS_FRAME_FRAME_BASED) { + frame->dwMaxVideoFrameBufferSize = + le32_to_cpup((__le32 *)&buffer[17]); + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[21]); + frame->bFrameIntervalType = buffer[25]; + } else { + frame->dwMaxVideoFrameBufferSize = 0; + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[17]); + frame->bFrameIntervalType = buffer[21]; + } + frame->dwFrameInterval = *intervals; + + /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize + * completely. Observed behaviours range from setting the + * value to 1.1x the actual frame size of hardwiring the + * 16 low bits to 0. This results in a higher than necessary + * memory usage as well as a wrong image size information. For + * uncompressed formats this can be fixed by computing the + * value from the frame size. + */ + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED)) + frame->dwMaxVideoFrameBufferSize = format->bpp + * frame->wWidth * frame->wHeight / 8; + + /* Some bogus devices report dwMinFrameInterval equal to + * dwMaxFrameInterval and have dwFrameIntervalStep set to + * zero. Setting all null intervals to 1 fixes the problem and + * some other divisions by zero which could happen. + */ + for (i = 0; i < n; ++i) { + interval = le32_to_cpup((__le32 *)&buffer[26+4*i]); + *(*intervals)++ = interval ? interval : 1; + } + + /* Make sure that the default frame interval stays between + * the boundaries. + */ + n -= frame->bFrameIntervalType ? 1 : 2; + frame->dwDefaultFrameInterval = + min(frame->dwFrameInterval[n], + max(frame->dwFrameInterval[0], + frame->dwDefaultFrameInterval)); + + uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n", + frame->wWidth, frame->wHeight, + 10000000/frame->dwDefaultFrameInterval, + (100000000/frame->dwDefaultFrameInterval)%10); + + format->nframes++; + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_STILL_IMAGE_FRAME) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_COLORFORMAT) { + if (buflen < 6) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d COLORFORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + format->colorspace = uvc_colorspace(buffer[3]); + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + return buffer - start; +} + +static int uvc_parse_streaming(struct uvc_device *dev, + struct usb_interface *intf) +{ + struct uvc_streaming *streaming = NULL; + struct uvc_format *format; + struct uvc_frame *frame; + struct usb_host_interface *alts = &intf->altsetting[0]; + unsigned char *_buffer, *buffer = alts->extra; + int _buflen, buflen = alts->extralen; + unsigned int nformats = 0, nframes = 0, nintervals = 0; + unsigned int size, i, n, p; + __u32 *interval; + __u16 psize; + int ret = -EINVAL; + + if (intf->cur_altsetting->desc.bInterfaceSubClass + != SC_VIDEOSTREAMING) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a " + "video streaming interface\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already " + "claimed\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + streaming = kzalloc(sizeof *streaming, GFP_KERNEL); + if (streaming == NULL) { + usb_driver_release_interface(&uvc_driver.driver, intf); + return -EINVAL; + } + + mutex_init(&streaming->mutex); + streaming->intf = usb_get_intf(intf); + streaming->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + + /* The Pico iMage webcam has its class-specific interface descriptors + * after the endpoint descriptors. + */ + if (buflen == 0) { + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + struct usb_host_endpoint *ep = &alts->endpoint[i]; + + if (ep->extralen == 0) + continue; + + if (ep->extralen > 2 && + ep->extra[1] == USB_DT_CS_INTERFACE) { + uvc_trace(UVC_TRACE_DESCR, "trying extra data " + "from endpoint %u.\n", i); + buffer = alts->endpoint[i].extra; + buflen = alts->endpoint[i].extralen; + break; + } + } + } + + /* Skip the standard interface descriptors. */ + while (buflen > 2 && buffer[1] != USB_DT_CS_INTERFACE) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen <= 2) { + uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming " + "interface descriptors found.\n"); + goto error; + } + + /* Parse the header descriptor. */ + if (buffer[2] == VS_OUTPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d OUTPUT HEADER descriptor is not supported.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } else if (buffer[2] == VS_INPUT_HEADER) { + p = buflen >= 5 ? buffer[3] : 0; + n = buflen >= 12 ? buffer[12] : 0; + + if (buflen < 13 + p*n || buffer[2] != VS_INPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d INPUT HEADER descriptor is " + "invalid.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + streaming->header.bNumFormats = p; + streaming->header.bEndpointAddress = buffer[6]; + streaming->header.bmInfo = buffer[7]; + streaming->header.bTerminalLink = buffer[8]; + streaming->header.bStillCaptureMethod = buffer[9]; + streaming->header.bTriggerSupport = buffer[10]; + streaming->header.bTriggerUsage = buffer[11]; + streaming->header.bControlSize = n; + + streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL); + if (streaming->header.bmaControls == NULL) { + ret = -ENOMEM; + goto error; + } + + memcpy(streaming->header.bmaControls, &buffer[13], p*n); + } else { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d HEADER descriptor not found.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + + _buffer = buffer; + _buflen = buflen; + + /* Count the format and frame descriptors. */ + while (_buflen > 2) { + switch (_buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_FRAME_BASED: + nformats++; + break; + + case VS_FORMAT_DV: + /* DV format has no frame descriptor. We will create a + * dummy frame descriptor with a dummy frame interval. + */ + nformats++; + nframes++; + nintervals++; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d FORMAT %u is not supported.\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, _buffer[2]); + break; + + case VS_FRAME_UNCOMPRESSED: + case VS_FRAME_MJPEG: + nframes++; + if (_buflen > 25) + nintervals += _buffer[25] ? _buffer[25] : 3; + break; + + case VS_FRAME_FRAME_BASED: + nframes++; + if (_buflen > 21) + nintervals += _buffer[21] ? _buffer[21] : 3; + break; + } + + _buflen -= _buffer[0]; + _buffer += _buffer[0]; + } + + if (nformats == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d has no supported formats defined.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } + + size = nformats * sizeof *format + nframes * sizeof *frame + + nintervals * sizeof *interval; + format = kzalloc(size, GFP_KERNEL); + if (format == NULL) { + ret = -ENOMEM; + goto error; + } + + frame = (struct uvc_frame *)&format[nformats]; + interval = (__u32 *)&frame[nframes]; + + streaming->format = format; + streaming->nformats = nformats; + + /* Parse the format descriptors. */ + while (buflen > 2) { + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_DV: + case VS_FORMAT_FRAME_BASED: + format->frame = frame; + ret = uvc_parse_format(dev, streaming, format, + &interval, buffer, buflen); + if (ret < 0) + goto error; + + frame += format->nframes; + format++; + + buflen -= ret; + buffer += ret; + continue; + + default: + break; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Parse the alternate settings to find the maximum bandwidth. */ + for (i = 0; i < intf->num_altsetting; ++i) { + struct usb_host_endpoint *ep; + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize > streaming->maxpsize) + streaming->maxpsize = psize; + } + + list_add_tail(&streaming->list, &dev->streaming); + return 0; + +error: + usb_driver_release_interface(&uvc_driver.driver, intf); + usb_put_intf(intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + return ret; +} + +/* Parse vendor-specific extensions. */ +static int uvc_parse_vendor_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + struct uvc_entity *unit; + unsigned int n, p; + int handled = 0; + + switch (le16_to_cpu(dev->udev->descriptor.idVendor)) { + case 0x046d: /* Logitech */ + if (buffer[1] != 0x41 || buffer[2] != 0x01) + break; + + /* Logitech implements several vendor specific functions + * through vendor specific extension units (LXU). + * + * The LXU descriptors are similar to XU descriptors + * (see "USB Device Video Class for Video Devices", section + * 3.7.2.6 "Extension Unit Descriptor") with the following + * differences: + * + * ---------------------------------------------------------- + * 0 bLength 1 Number + * Size of this descriptor, in bytes: 24+p+n*2 + * ---------------------------------------------------------- + * 23+p+n bmControlsType N Bitmap + * Individual bits in the set are defined: + * 0: Absolute + * 1: Relative + * + * This bitset is mapped exactly the same as bmControls. + * ---------------------------------------------------------- + * 23+p+n*2 bReserved 1 Boolean + * ---------------------------------------------------------- + * 24+p+n*2 iExtension 1 Index + * Index of a string descriptor that describes this + * extension unit. + * ---------------------------------------------------------- + */ + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 25 + p ? buffer[22+p] : 0; + + if (buflen < 25 + p + 2*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + break; + } + + unit = kzalloc(sizeof *unit + p + 2*n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = VC_EXTENSION_UNIT; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + unit->extension.bmControlsType = (__u8 *)unit + sizeof *unit + + p + n; + memcpy(unit->extension.bmControls, &buffer[23+p], 2*n); + + if (buffer[24+p+2*n] != 0) + usb_string(udev, buffer[24+p+2*n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + handled = 1; + break; + } + + return handled; +} + +static int uvc_parse_standard_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct uvc_entity *unit, *term; + struct usb_interface *intf; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned int i, n, p, len; + __u16 type; + + switch (buffer[2]) { + case VC_HEADER: + n = buflen >= 12 ? buffer[11] : 0; + + if (buflen < 12 || buflen < 12 + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d HEADER error\n", udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + dev->uvc_version = le16_to_cpup((__le16 *)&buffer[3]); + dev->clock_frequency = le32_to_cpup((__le32 *)&buffer[7]); + + /* Parse all USB Video Streaming interfaces. */ + for (i = 0; i < n; ++i) { + intf = usb_ifnum_to_if(udev, buffer[12+i]); + if (intf == NULL) { + uvc_trace(UVC_TRACE_DESCR, "device %d " + "interface %d doesn't exists\n", + udev->devnum, i); + continue; + } + + uvc_parse_streaming(dev, intf); + } + break; + + case VC_INPUT_TERMINAL: + if (buflen < 8) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, + buffer[3], type); + return 0; + } + + n = 0; + p = 0; + len = 8; + + if (type == ITT_CAMERA) { + n = buflen >= 15 ? buffer[14] : 0; + len = 15; + + } else if (type == ITT_MEDIA_TRANSPORT_INPUT) { + n = buflen >= 9 ? buffer[8] : 0; + p = buflen >= 10 + n ? buffer[9+n] : 0; + len = 10; + } + + if (buflen < len + n + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + term = kzalloc(sizeof *term + n + p, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_INPUT; + + if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) { + term->camera.bControlSize = n; + term->camera.bmControls = (__u8 *)term + sizeof *term; + term->camera.wObjectiveFocalLengthMin = + le16_to_cpup((__le16 *)&buffer[8]); + term->camera.wObjectiveFocalLengthMax = + le16_to_cpup((__le16 *)&buffer[10]); + term->camera.wOcularFocalLength = + le16_to_cpup((__le16 *)&buffer[12]); + memcpy(term->camera.bmControls, &buffer[15], n); + } else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) { + term->media.bControlSize = n; + term->media.bmControls = (__u8 *)term + sizeof *term; + term->media.bTransportModeSize = p; + term->media.bmTransportModes = (__u8 *)term + + sizeof *term + n; + memcpy(term->media.bmControls, &buffer[9], n); + memcpy(term->media.bmTransportModes, &buffer[10+n], p); + } + + if (buffer[7] != 0) + usb_string(udev, buffer[7], term->name, + sizeof term->name); + else if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) + sprintf(term->name, "Camera %u", buffer[3]); + else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) + sprintf(term->name, "Media %u", buffer[3]); + else + sprintf(term->name, "Input %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_OUTPUT_TERMINAL: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, buffer[3], type); + return 0; + } + + term = kzalloc(sizeof *term, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_OUTPUT; + term->output.bSourceID = buffer[7]; + + if (buffer[8] != 0) + usb_string(udev, buffer[8], term->name, + sizeof term->name); + else + sprintf(term->name, "Output %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_SELECTOR_UNIT: + p = buflen >= 5 ? buffer[4] : 0; + + if (buflen < 5 || buflen < 6 + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d SELECTOR_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->selector.bNrInPins = buffer[4]; + unit->selector.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->selector.baSourceID, &buffer[5], p); + + if (buffer[5+p] != 0) + usb_string(udev, buffer[5+p], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Selector %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_PROCESSING_UNIT: + n = buflen >= 8 ? buffer[7] : 0; + p = dev->uvc_version >= 0x0110 ? 10 : 9; + + if (buflen < p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d PROCESSING_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->processing.bSourceID = buffer[4]; + unit->processing.wMaxMultiplier = + le16_to_cpup((__le16 *)&buffer[5]); + unit->processing.bControlSize = buffer[7]; + unit->processing.bmControls = (__u8 *)unit + sizeof *unit; + memcpy(unit->processing.bmControls, &buffer[8], n); + if (dev->uvc_version >= 0x0110) + unit->processing.bmVideoStandards = buffer[9+n]; + + if (buffer[8+n] != 0) + usb_string(udev, buffer[8+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Processing %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_EXTENSION_UNIT: + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 24 + p ? buffer[22+p] : 0; + + if (buflen < 24 + p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + memcpy(unit->extension.bmControls, &buffer[23+p], n); + + if (buffer[23+p+n] != 0) + usb_string(udev, buffer[23+p+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE " + "descriptor (%u)\n", buffer[2]); + break; + } + + return 0; +} + +static int uvc_parse_control(struct uvc_device *dev) +{ + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned char *buffer = alts->extra; + int buflen = alts->extralen; + int ret; + + /* Parse the default alternate setting only, as the UVC specification + * defines a single alternate setting, the default alternate setting + * zero. + */ + + while (buflen > 2) { + if (uvc_parse_vendor_control(dev, buffer, buflen) || + buffer[1] != USB_DT_CS_INTERFACE) + goto next_descriptor; + + if ((ret = uvc_parse_standard_control(dev, buffer, buflen)) < 0) + return ret; + +next_descriptor: + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Check if the optional status endpoint is present. */ + if (alts->desc.bNumEndpoints == 1) { + struct usb_host_endpoint *ep = &alts->endpoint[0]; + struct usb_endpoint_descriptor *desc = &ep->desc; + + if (usb_endpoint_is_int_in(desc) && + le16_to_cpu(desc->wMaxPacketSize) >= 8 && + desc->bInterval != 0) { + uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint " + "(addr %02x).\n", desc->bEndpointAddress); + dev->int_ep = ep; + } + } + + return 0; +} + +/* ------------------------------------------------------------------------ + * USB probe and disconnect + */ + +/* + * Unregister the video devices. + */ +static void uvc_unregister_video(struct uvc_device *dev) +{ + if (dev->video.vdev) { + if (dev->video.vdev->minor == -1) + video_device_release(dev->video.vdev); + else + video_unregister_device(dev->video.vdev); + dev->video.vdev = NULL; + } +} + +/* + * Scan the UVC descriptors to locate a chain starting at an Output Terminal + * and containing the following units: + * + * - a USB Streaming Output Terminal + * - zero or one Processing Unit + * - zero, one or mode single-input Selector Units + * - zero or one multiple-input Selector Units, provided all inputs are + * connected to input terminals + * - zero, one or mode single-input Extension Units + * - one Camera Input Terminal, or one or more External terminals. + * + * A side forward scan is made on each detected entity to check for additional + * extension units. + */ +static int uvc_scan_chain_entity(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- XU %d", entity->id); + + if (entity->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more " + "than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&entity->chain, &video->extensions); + break; + + case VC_PROCESSING_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- PU %d", entity->id); + + if (video->processing != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple " + "Processing Units in chain.\n"); + return -1; + } + + video->processing = entity; + break; + + case VC_SELECTOR_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- SU %d", entity->id); + + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) + break; + + if (video->selector != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector " + "Units in chain.\n"); + return -1; + } + + video->selector = entity; + break; + + case ITT_VENDOR_SPECIFIC: + case ITT_CAMERA: + case ITT_MEDIA_TRANSPORT_INPUT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT %d\n", entity->id); + + list_add_tail(&entity->chain, &video->iterms); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type " + "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity)); + return -1; + } + + return 0; +} + +static int uvc_scan_chain_forward(struct uvc_video_device *video, + struct uvc_entity *entity, struct uvc_entity *prev) +{ + struct uvc_entity *forward; + int found; + + /* Forward scan */ + forward = NULL; + found = 0; + + while (1) { + forward = uvc_entity_by_reference(video->dev, entity->id, + forward); + if (forward == NULL) + break; + + if (UVC_ENTITY_TYPE(forward) != VC_EXTENSION_UNIT || + forward == prev) + continue; + + if (forward->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has" + "more than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&forward->chain, &video->extensions); + if (uvc_trace_param & UVC_TRACE_PROBE) { + if (!found) + printk(" (-> XU"); + + printk(" %d", forward->id); + found = 1; + } + } + if (found) + printk(")"); + + return 0; +} + +static int uvc_scan_chain_backward(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + struct uvc_entity *term; + int id = -1, i; + + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + id = entity->extension.baSourceID[0]; + break; + + case VC_PROCESSING_UNIT: + id = entity->processing.bSourceID; + break; + + case VC_SELECTOR_UNIT: + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) { + id = entity->selector.baSourceID[0]; + break; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT"); + + video->selector = entity; + for (i = 0; i < entity->selector.bNrInPins; ++i) { + id = entity->selector.baSourceID[i]; + term = uvc_entity_by_id(video->dev, id); + if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) { + uvc_trace(UVC_TRACE_DESCR, "Selector unit %d " + "input %d isn't connected to an " + "input terminal\n", entity->id, i); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" %d", term->id); + + list_add_tail(&term->chain, &video->iterms); + uvc_scan_chain_forward(video, term, entity); + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk("\n"); + + id = 0; + break; + } + + return id; +} + +static int uvc_scan_chain(struct uvc_video_device *video) +{ + struct uvc_entity *entity, *prev; + int id; + + entity = video->oterm; + uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id); + id = entity->output.bSourceID; + while (id != 0) { + prev = entity; + entity = uvc_entity_by_id(video->dev, id); + if (entity == NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found reference to " + "unknown entity %d.\n", id); + return -1; + } + + /* Process entity */ + if (uvc_scan_chain_entity(video, entity) < 0) + return -1; + + /* Forward scan */ + if (uvc_scan_chain_forward(video, entity, prev) < 0) + return -1; + + /* Stop when a terminal is found. */ + if (!UVC_ENTITY_IS_UNIT(entity)) + break; + + /* Backward scan */ + id = uvc_scan_chain_backward(video, entity); + if (id < 0) + return id; + } + + /* Initialize the video buffers queue. */ + uvc_queue_init(&video->queue); + + return 0; +} + +/* + * Register the video devices. + * + * The driver currently supports a single video device per control interface + * only. The terminal and units must match the following structure: + * + * ITT_CAMERA -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> TT_STREAMING + * + * The Extension Units, if present, must have a single input pin. The + * Processing Unit and Extension Units can be in any order. Additional + * Extension Units connected to the main chain as single-unit branches are + * also supported. + */ +static int uvc_register_video(struct uvc_device *dev) +{ + struct video_device *vdev; + struct uvc_entity *term; + int found = 0, ret; + + /* Check if the control interface matches the structure we expect. */ + list_for_each_entry(term, &dev->entities, list) { + struct uvc_streaming *streaming; + + if (UVC_ENTITY_TYPE(term) != TT_STREAMING) + continue; + + memset(&dev->video, 0, sizeof dev->video); + mutex_init(&dev->video.ctrl_mutex); + INIT_LIST_HEAD(&dev->video.iterms); + INIT_LIST_HEAD(&dev->video.extensions); + dev->video.oterm = term; + dev->video.dev = dev; + if (uvc_scan_chain(&dev->video) < 0) + continue; + + list_for_each_entry(streaming, &dev->streaming, list) { + if (streaming->header.bTerminalLink == term->id) { + dev->video.streaming = streaming; + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) { + uvc_printk(KERN_INFO, "No valid video chain found.\n"); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) { + uvc_printk(KERN_INFO, "Found a valid video chain ("); + list_for_each_entry(term, &dev->video.iterms, chain) { + printk("%d", term->id); + if (term->chain.next != &dev->video.iterms) + printk(","); + } + printk(" -> %d).\n", dev->video.oterm->id); + } + + /* Initialize the streaming interface with default streaming + * parameters. + */ + if ((ret = uvc_video_init(&dev->video)) < 0) { + uvc_printk(KERN_ERR, "Failed to initialize the device " + "(%d).\n", ret); + return ret; + } + + /* Register the device with V4L. */ + vdev = video_device_alloc(); + if (vdev == NULL) + return -1; + + /* We already hold a reference to dev->udev. The video device will be + * unregistered before the reference is released, so we don't need to + * get another one. + */ + vdev->dev = &dev->intf->dev; + vdev->type = 0; + vdev->type2 = 0; + vdev->minor = -1; + vdev->fops = &uvc_fops; + vdev->release = video_device_release; + strncpy(vdev->name, dev->name, sizeof vdev->name); + + /* Set the driver data before calling video_register_device, otherwise + * uvc_v4l2_open might race us. + * + * FIXME: usb_set_intfdata hasn't been called so far. Is that a + * problem ? Does any function which could be called here get + * a pointer to the usb_interface ? + */ + dev->video.vdev = vdev; + video_set_drvdata(vdev, &dev->video); + + if (video_register_device(vdev, VFL_TYPE_GRABBER, -1) < 0) { + dev->video.vdev = NULL; + video_device_release(vdev); + return -1; + } + + return 0; +} + +/* + * Delete the UVC device. + * + * Called by the kernel when the last reference to the uvc_device structure + * is released. + * + * Unregistering the video devices is done here because every opened instance + * must be closed before the device can be unregistered. An alternative would + * have been to use another reference count for uvc_v4l2_open/uvc_release, and + * unregister the video devices on disconnect when that reference count drops + * to zero. + * + * As this function is called after or during disconnect(), all URBs have + * already been canceled by the USB core. There is no need to kill the + * interrupt URB manually. + */ +void uvc_delete(struct kref *kref) +{ + struct uvc_device *dev = container_of(kref, struct uvc_device, kref); + struct list_head *p, *n; + + /* Unregister the video device */ + uvc_unregister_video(dev); + usb_put_intf(dev->intf); + usb_put_dev(dev->udev); + + uvc_status_cleanup(dev); + uvc_ctrl_cleanup_device(dev); + + list_for_each_safe(p, n, &dev->entities) { + struct uvc_entity *entity; + entity = list_entry(p, struct uvc_entity, list); + kfree(entity); + } + + list_for_each_safe(p, n, &dev->streaming) { + struct uvc_streaming *streaming; + streaming = list_entry(p, struct uvc_streaming, list); + usb_driver_release_interface(&uvc_driver.driver, + streaming->intf); + usb_put_intf(streaming->intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + } + + kfree(dev); +} + +static int uvc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct uvc_device *dev; + int ret; + + if (id->idVendor && id->idProduct) + uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s " + "(%04x:%04x)\n", udev->devpath, id->idVendor, + id->idProduct); + else + uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", + udev->devpath); + + /* Allocate memory for the device and initialize it */ + if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) + return -ENOMEM; + + INIT_LIST_HEAD(&dev->entities); + INIT_LIST_HEAD(&dev->streaming); + kref_init(&dev->kref); + + dev->udev = usb_get_dev(udev); + dev->intf = usb_get_intf(intf); + dev->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + dev->quirks = id->driver_info | uvc_quirks_param; + + if (udev->product != NULL) + strncpy(dev->name, udev->product, sizeof dev->name); + else + snprintf(dev->name, sizeof dev->name, + "UVC Camera (%04x:%04x)", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + /* Parse the Video Class control descriptor */ + if (uvc_parse_control(dev) < 0) { + uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " + "descriptors.\n"); + goto error; + } + + uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + dev->uvc_version >> 8, dev->uvc_version & 0xff, + udev->product ? udev->product : "<unnamed>", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + if (uvc_quirks_param != 0) { + uvc_printk(KERN_INFO, "Forcing device quirks 0x%x by module " + "parameter for testing purpose.\n", uvc_quirks_param); + uvc_printk(KERN_INFO, "Please report required quirks to the " + "linux-uvc-devel mailing list.\n"); + } + + /* Initialize controls */ + if (uvc_ctrl_init_device(dev) < 0) + goto error; + + /* Register the video devices */ + if (uvc_register_video(dev) < 0) + goto error; + + /* Save our data pointer in the interface data */ + usb_set_intfdata(intf, dev); + + /* Initialize the interrupt URB */ + if ((ret = uvc_status_init(dev)) < 0) { + uvc_printk(KERN_INFO, "Unable to initialize the status " + "endpoint (%d), status interrupt will not be " + "supported.\n", ret); + } + + uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n"); + return 0; + +error: + kref_put(&dev->kref, uvc_delete); + return -ENODEV; +} + +static void uvc_disconnect(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + /* Set the USB interface data to NULL. This can be done outside the + * lock, as there's no other reader. + */ + usb_set_intfdata(intf, NULL); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOSTREAMING) + return; + + /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide + * lock is needed to prevent uvc_disconnect from releasing its + * reference to the uvc_device instance after uvc_v4l2_open() received + * the pointer to the device (video_devdata) but before it got the + * chance to increase the reference count (kref_get). + */ + mutex_lock(&uvc_driver.open_mutex); + + dev->state |= UVC_DEV_DISCONNECTED; + kref_put(&dev->kref, uvc_delete); + + mutex_unlock(&uvc_driver.open_mutex); +} + +static int uvc_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + uvc_trace(UVC_TRACE_SUSPEND, "Suspending interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + /* Controls are cached on the fly so they don't need to be saved. */ + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) + return uvc_status_suspend(dev); + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_suspend(&dev->video); +} + +static int uvc_resume(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + int ret; + + uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { + if ((ret = uvc_ctrl_resume_device(dev)) < 0) + return ret; + + return uvc_status_resume(dev); + } + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_resume(&dev->video); +} + +/* ------------------------------------------------------------------------ + * Driver initialization and cleanup + */ + +/* + * The Logitech cameras listed below have their interface class set to + * VENDOR_SPEC because they don't announce themselves as UVC devices, even + * though they are compliant. + */ +static struct usb_device_id uvc_ids[] = { + /* ALi M5606 (Clevo M540SR) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0402, + .idProduct = 0x5606, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Creative Live! Optia */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x041e, + .idProduct = 0x4057, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam NX-6000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x00f8, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam VX-7000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x0723, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Logitech Quickcam Fusion */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c1, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Orbit MP */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro for Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c3, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro 5000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c5, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Dell Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c6, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Cisco VT Camera II */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c7, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Apple Built-In iSight */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05ac, + .idProduct = 0x8501, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_BUILTIN_ISIGHT }, + /* Genesys Logic USB 2.0 PC Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Silicon Motion SM371 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x090c, + .idProduct = 0xb371, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* MT6227 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0e8d, + .idProduct = 0x0004, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Syntek (HP Spartan) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x5212, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Syntek (Asus U3S) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x8a33, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Ecamm Pico iMage */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x18cd, + .idProduct = 0xcafe, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, + /* Bodelin ProScopeHR */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_DEV_HI + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19ab, + .idProduct = 0x1000, + .bcdDevice_hi = 0x0126, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STATUS_INTERVAL }, + /* SiGma Micro USB Web Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1c4f, + .idProduct = 0x3000, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_IGNORE_SELECTOR_UNIT}, + /* Acer OEM Webcam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0100, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Packard Bell OEM Webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0101, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer Crystal Eye webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0102, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer OrbiCam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0200, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Generic USB Video Class */ + { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, + {} +}; + +MODULE_DEVICE_TABLE(usb, uvc_ids); + +struct uvc_driver uvc_driver = { + .driver = { + .name = "uvcvideo", + .probe = uvc_probe, + .disconnect = uvc_disconnect, + .suspend = uvc_suspend, + .resume = uvc_resume, + .id_table = uvc_ids, + .supports_autosuspend = 1, + }, +}; + +static int __init uvc_init(void) +{ + int result; + + INIT_LIST_HEAD(&uvc_driver.devices); + INIT_LIST_HEAD(&uvc_driver.controls); + mutex_init(&uvc_driver.open_mutex); + mutex_init(&uvc_driver.ctrl_mutex); + + uvc_ctrl_init(); + + result = usb_register(&uvc_driver.driver); + if (result == 0) + printk(KERN_INFO DRIVER_DESC " (" DRIVER_VERSION ")\n"); + return result; +} + +static void __exit uvc_cleanup(void) +{ + usb_deregister(&uvc_driver.driver); +} + +module_init(uvc_init); +module_exit(uvc_cleanup); + +module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(quirks, "Forced device quirks"); +module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(trace, "Trace level bitmask"); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c new file mode 100644 index 00000000000..37bdefdbead --- /dev/null +++ b/drivers/media/video/uvc/uvc_isight.c @@ -0,0 +1,134 @@ +/* + * uvc_isight.c -- USB Video Class driver - iSight support + * + * Copyright (C) 2006-2007 + * Ivan N. Zlatev <contact@i-nz.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/usb.h> +#include <linux/kernel.h> +#include <linux/mm.h> + +#include "uvcvideo.h" + +/* Built-in iSight webcams implements most of UVC 1.0 except a + * different packet format. Instead of sending a header at the + * beginning of each isochronous transfer payload, the webcam sends a + * single header per image (on its own in a packet), followed by + * packets containing data only. + * + * Offset Size (bytes) Description + * ------------------------------------------------------------------ + * 0x00 1 Header length + * 0x01 1 Flags (UVC-compliant) + * 0x02 4 Always equal to '11223344' + * 0x06 8 Always equal to 'deadbeefdeadface' + * 0x0e 16 Unknown + * + * The header can be prefixed by an optional, unknown-purpose byte. + */ + +static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf, + const __u8 *data, unsigned int len) +{ + static const __u8 hdr[] = { + 0x11, 0x22, 0x33, 0x44, + 0xde, 0xad, 0xbe, 0xef, + 0xde, 0xad, 0xfa, 0xce + }; + + unsigned int maxlen, nbytes; + __u8 *mem; + int is_header = 0; + + if (buf == NULL) + return 0; + + if ((len >= 14 && memcmp(&data[2], hdr, 12) == 0) || + (len >= 15 && memcmp(&data[3], hdr, 12) == 0)) { + uvc_trace(UVC_TRACE_FRAME, "iSight header found\n"); + is_header = 1; + } + + /* Synchronize to the input stream by waiting for a header packet. */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (!is_header) { + uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of " + "sync).\n"); + return 0; + } + + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. + */ + if (is_header && buf->buf.bytesused != 0) { + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + /* Copy the video data to the buffer. Skip header packets, as they + * contain no data. + */ + if (!is_header) { + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min(len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + if (len > maxlen || buf->buf.bytesused == buf->buf.length) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete " + "(overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } + } + + return 0; +} + +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf) +{ + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", + urb->iso_frame_desc[i].status); + } + + /* Decode the payload packet. + * uvc_video_decode is entered twice when a frame transition + * has been detected because the end of frame can only be + * reliably detected when the first packet of the new frame + * is processed. The first pass detects the transition and + * closes the previous frame's buffer, the second pass + * processes the data of the first payload of the new frame. + */ + do { + ret = isight_decode(&video->queue, buf, + urb->transfer_buffer + + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + + if (buf == NULL) + break; + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + } +} diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c new file mode 100644 index 00000000000..0923f0e3b3d --- /dev/null +++ b/drivers/media/video/uvc/uvc_queue.c @@ -0,0 +1,477 @@ +/* + * uvc_queue.c -- USB Video Class driver - Buffers management + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <linux/vmalloc.h> +#include <linux/wait.h> +#include <asm/atomic.h> + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * Video buffers queue management. + * + * Video queues is initialized by uvc_queue_init(). The function performs + * basic initialization of the uvc_video_queue struct and never fails. + * + * Video buffer allocation and freeing are performed by uvc_alloc_buffers and + * uvc_free_buffers respectively. The former acquires the video queue lock, + * while the later must be called with the lock held (so that allocation can + * free previously allocated buffers). Trying to free buffers that are mapped + * to user space will return -EBUSY. + * + * Video buffers are managed using two queues. However, unlike most USB video + * drivers which use an in queue and an out queue, we use a main queue which + * holds all queued buffers (both 'empty' and 'done' buffers), and an irq + * queue which holds empty buffers. This design (copied from video-buf) + * minimizes locking in interrupt, as only one queue is shared between + * interrupt and user contexts. + * + * Use cases + * --------- + * + * Unless stated otherwise, all operations which modify the irq buffers queue + * are protected by the irq spinlock. + * + * 1. The user queues the buffers, starts streaming and dequeues a buffer. + * + * The buffers are added to the main and irq queues. Both operations are + * protected by the queue lock, and the latert is protected by the irq + * spinlock as well. + * + * The completion handler fetches a buffer from the irq queue and fills it + * with video data. If no buffer is available (irq queue empty), the handler + * returns immediately. + * + * When the buffer is full, the completion handler removes it from the irq + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * At that point, any process waiting on the buffer will be woken up. If a + * process tries to dequeue a buffer after it has been marked ready, the + * dequeing will succeed immediately. + * + * 2. Buffers are queued, user is waiting on a buffer and the device gets + * disconnected. + * + * When the device is disconnected, the kernel calls the completion handler + * with an appropriate status code. The handler marks all buffers in the + * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so + * that any process waiting on a buffer gets woken up. + * + * Waking up up the first buffer on the irq list is not enough, as the + * process waiting on the buffer might restart the dequeue operation + * immediately. + * + */ + +void uvc_queue_init(struct uvc_video_queue *queue) +{ + mutex_init(&queue->mutex); + spin_lock_init(&queue->irqlock); + INIT_LIST_HEAD(&queue->mainqueue); + INIT_LIST_HEAD(&queue->irqqueue); +} + +/* + * Allocate the video buffers. + * + * Pages are reserved to make sure they will not be swaped, as they will be + * filled in URB completion handler. + * + * Buffers will be individually mapped, so they must all be page aligned. + */ +int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, + unsigned int buflength) +{ + unsigned int bufsize = PAGE_ALIGN(buflength); + unsigned int i; + void *mem = NULL; + int ret; + + if (nbuffers > UVC_MAX_VIDEO_BUFFERS) + nbuffers = UVC_MAX_VIDEO_BUFFERS; + + mutex_lock(&queue->mutex); + + if ((ret = uvc_free_buffers(queue)) < 0) + goto done; + + /* Bail out if no buffers should be allocated. */ + if (nbuffers == 0) + goto done; + + /* Decrement the number of buffers until allocation succeeds. */ + for (; nbuffers > 0; --nbuffers) { + mem = vmalloc_32(nbuffers * bufsize); + if (mem != NULL) + break; + } + + if (mem == NULL) { + ret = -ENOMEM; + goto done; + } + + for (i = 0; i < nbuffers; ++i) { + memset(&queue->buffer[i], 0, sizeof queue->buffer[i]); + queue->buffer[i].buf.index = i; + queue->buffer[i].buf.m.offset = i * bufsize; + queue->buffer[i].buf.length = buflength; + queue->buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + queue->buffer[i].buf.sequence = 0; + queue->buffer[i].buf.field = V4L2_FIELD_NONE; + queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP; + queue->buffer[i].buf.flags = 0; + init_waitqueue_head(&queue->buffer[i].wait); + } + + queue->mem = mem; + queue->count = nbuffers; + queue->buf_size = bufsize; + ret = nbuffers; + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Free the video buffers. + * + * This function must be called with the queue lock held. + */ +int uvc_free_buffers(struct uvc_video_queue *queue) +{ + unsigned int i; + + for (i = 0; i < queue->count; ++i) { + if (queue->buffer[i].vma_use_count != 0) + return -EBUSY; + } + + if (queue->count) { + vfree(queue->mem); + queue->count = 0; + } + + return 0; +} + +static void __uvc_query_buffer(struct uvc_buffer *buf, + struct v4l2_buffer *v4l2_buf) +{ + memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf); + + if (buf->vma_use_count) + v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED; + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + case UVC_BUF_STATE_DONE: + v4l2_buf->flags |= V4L2_BUF_FLAG_DONE; + break; + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; + break; + case UVC_BUF_STATE_IDLE: + default: + break; + } +} + +int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + int ret = 0; + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + ret = -EINVAL; + goto done; + } + + __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Queue a video buffer. Attempting to queue a buffer that has already been + * queued will return -EINVAL. + */ +int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + struct uvc_buffer *buf; + unsigned long flags; + int ret = 0; + + uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index); + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); + ret = -EINVAL; + goto done; + } + + buf = &queue->buffer[v4l2_buf->index]; + if (buf->state != UVC_BUF_STATE_IDLE) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state " + "(%u).\n", buf->state); + ret = -EINVAL; + goto done; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (queue->flags & UVC_QUEUE_DISCONNECTED) { + spin_unlock_irqrestore(&queue->irqlock, flags); + ret = -ENODEV; + goto done; + } + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + list_add_tail(&buf->stream, &queue->mainqueue); + list_add_tail(&buf->queue, &queue->irqqueue); + spin_unlock_irqrestore(&queue->irqlock, flags); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) +{ + if (nonblocking) { + return (buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE) + ? 0 : -EAGAIN; + } + + return wait_event_interruptible(buf->wait, + buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE); +} + +/* + * Dequeue a video buffer. If nonblocking is false, block until a buffer is + * available. + */ +int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking) +{ + struct uvc_buffer *buf; + int ret = 0; + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n"); + ret = -EINVAL; + goto done; + } + + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0) + goto done; + + uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n", + buf->buf.index, buf->state, buf->buf.bytesused); + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data " + "(transmission error).\n"); + ret = -EIO; + case UVC_BUF_STATE_DONE: + buf->state = UVC_BUF_STATE_IDLE; + break; + + case UVC_BUF_STATE_IDLE: + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + default: + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " + "(driver bug?).\n", buf->state); + ret = -EINVAL; + goto done; + } + + list_del(&buf->stream); + __uvc_query_buffer(buf, v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Poll the video queue. + * + * This function implements video queue polling and is intended to be used by + * the device poll handler. + */ +unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, + poll_table *wait) +{ + struct uvc_buffer *buf; + unsigned int mask = 0; + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + mask |= POLLERR; + goto done; + } + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + + poll_wait(file, &buf->wait, wait); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + mask |= POLLIN | POLLRDNORM; + +done: + mutex_unlock(&queue->mutex); + return mask; +} + +/* + * Enable or disable the video buffers queue. + * + * The queue must be enabled before starting video acquisition and must be + * disabled after stopping it. This ensures that the video buffers queue + * state can be properly initialized before buffers are accessed from the + * interrupt handler. + * + * Enabling the video queue initializes parameters (such as sequence number, + * sync pattern, ...). If the queue is already enabled, return -EBUSY. + * + * Disabling the video queue cancels the queue and removes all buffers from + * the main queue. + * + * This function can't be called from interrupt context. Use + * uvc_queue_cancel() instead. + */ +int uvc_queue_enable(struct uvc_video_queue *queue, int enable) +{ + unsigned int i; + int ret = 0; + + mutex_lock(&queue->mutex); + if (enable) { + if (uvc_queue_streaming(queue)) { + ret = -EBUSY; + goto done; + } + queue->sequence = 0; + queue->flags |= UVC_QUEUE_STREAMING; + } else { + uvc_queue_cancel(queue, 0); + INIT_LIST_HEAD(&queue->mainqueue); + + for (i = 0; i < queue->count; ++i) + queue->buffer[i].state = UVC_BUF_STATE_IDLE; + + queue->flags &= ~UVC_QUEUE_STREAMING; + } + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Cancel the video buffers queue. + * + * Cancelling the queue marks all buffers on the irq queue as erroneous, + * wakes them up and remove them from the queue. + * + * If the disconnect parameter is set, further calls to uvc_queue_buffer will + * fail with -ENODEV. + * + * This function acquires the irq spinlock and can be called from interrupt + * context. + */ +void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) +{ + struct uvc_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&queue->irqlock, flags); + while (!list_empty(&queue->irqqueue)) { + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + list_del(&buf->queue); + buf->state = UVC_BUF_STATE_ERROR; + wake_up(&buf->wait); + } + /* This must be protected by the irqlock spinlock to avoid race + * conditions between uvc_queue_buffer and the disconnection event that + * could result in an interruptible wait in uvc_dequeue_buffer. Do not + * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED + * state outside the queue code. + */ + if (disconnect) + queue->flags |= UVC_QUEUE_DISCONNECTED; + spin_unlock_irqrestore(&queue->irqlock, flags); +} + +struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf) +{ + struct uvc_buffer *nextbuf; + unsigned long flags; + + if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) && + buf->buf.length != buf->buf.bytesused) { + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + return buf; + } + + spin_lock_irqsave(&queue->irqlock, flags); + list_del(&buf->queue); + if (!list_empty(&queue->irqqueue)) + nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + else + nextbuf = NULL; + spin_unlock_irqrestore(&queue->irqlock, flags); + + buf->buf.sequence = queue->sequence++; + do_gettimeofday(&buf->buf.timestamp); + + wake_up(&buf->wait); + return nextbuf; +} diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c new file mode 100644 index 00000000000..be9084e5eac --- /dev/null +++ b/drivers/media/video/uvc/uvc_status.c @@ -0,0 +1,207 @@ +/* + * uvc_status.c -- USB Video Class driver - Status endpoint + * + * Copyright (C) 2007-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/usb/input.h> + +#include "uvcvideo.h" + +/* -------------------------------------------------------------------------- + * Input device + */ +static int uvc_input_init(struct uvc_device *dev) +{ + struct usb_device *udev = dev->udev; + struct input_dev *input; + char *phys = NULL; + int ret; + + input = input_allocate_device(); + if (input == NULL) + return -ENOMEM; + + phys = kmalloc(6 + strlen(udev->bus->bus_name) + strlen(udev->devpath), + GFP_KERNEL); + if (phys == NULL) { + ret = -ENOMEM; + goto error; + } + sprintf(phys, "usb-%s-%s", udev->bus->bus_name, udev->devpath); + + input->name = dev->name; + input->phys = phys; + usb_to_input_id(udev, &input->id); + input->dev.parent = &dev->intf->dev; + + set_bit(EV_KEY, input->evbit); + set_bit(BTN_0, input->keybit); + + if ((ret = input_register_device(input)) < 0) + goto error; + + dev->input = input; + return 0; + +error: + input_free_device(input); + kfree(phys); + return ret; +} + +static void uvc_input_cleanup(struct uvc_device *dev) +{ + if (dev->input) + input_unregister_device(dev->input); +} + +/* -------------------------------------------------------------------------- + * Status interrupt endpoint + */ +static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len) +{ + if (len < 3) { + uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event " + "received.\n"); + return; + } + + if (data[2] == 0) { + if (len < 4) + return; + uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n", + data[1], data[3] ? "pressed" : "released", len); + if (dev->input) + input_report_key(dev->input, BTN_0, data[3]); + } else { + uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x " + "len %d.\n", data[1], data[2], data[3], len); + } +} + +static void uvc_event_control(struct uvc_device *dev, __u8 *data, int len) +{ + char *attrs[3] = { "value", "info", "failure" }; + + if (len < 6 || data[2] != 0 || data[4] > 2) { + uvc_trace(UVC_TRACE_STATUS, "Invalid control status event " + "received.\n"); + return; + } + + uvc_trace(UVC_TRACE_STATUS, "Control %u/%u %s change len %d.\n", + data[1], data[3], attrs[data[4]], len); +} + +static void uvc_status_complete(struct urb *urb) +{ + struct uvc_device *dev = urb->context; + int len, ret; + + switch (urb->status) { + case 0: + break; + + case -ENOENT: /* usb_kill_urb() called. */ + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + case -EPROTO: /* Device is disconnected (reported by some + * host controller). */ + return; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in status " + "completion handler.\n", urb->status); + return; + } + + len = urb->actual_length; + if (len > 0) { + switch (dev->status[0] & 0x0f) { + case UVC_STATUS_TYPE_CONTROL: + uvc_event_control(dev, dev->status, len); + break; + + case UVC_STATUS_TYPE_STREAMING: + uvc_event_streaming(dev, dev->status, len); + break; + + default: + uvc_printk(KERN_INFO, "unknown event type %u.\n", + dev->status[0]); + break; + } + } + + /* Resubmit the URB. */ + urb->interval = dev->int_ep->desc.bInterval; + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit status URB (%d).\n", + ret); + } +} + +int uvc_status_init(struct uvc_device *dev) +{ + struct usb_host_endpoint *ep = dev->int_ep; + unsigned int pipe; + int interval; + + if (ep == NULL) + return 0; + + uvc_input_init(dev); + + dev->int_urb = usb_alloc_urb(0, GFP_KERNEL); + if (dev->int_urb == NULL) + return -ENOMEM; + + pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); + + /* For high-speed interrupt endpoints, the bInterval value is used as + * an exponent of two. Some developers forgot about it. + */ + interval = ep->desc.bInterval; + if (interval > 16 && dev->udev->speed == USB_SPEED_HIGH && + (dev->quirks & UVC_QUIRK_STATUS_INTERVAL)) + interval = fls(interval) - 1; + + usb_fill_int_urb(dev->int_urb, dev->udev, pipe, + dev->status, sizeof dev->status, uvc_status_complete, + dev, interval); + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} + +void uvc_status_cleanup(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + usb_free_urb(dev->int_urb); + uvc_input_cleanup(dev); +} + +int uvc_status_suspend(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + return 0; +} + +int uvc_status_resume(struct uvc_device *dev) +{ + if (dev->int_urb == NULL) + return 0; + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c new file mode 100644 index 00000000000..2e0a66575bb --- /dev/null +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -0,0 +1,1105 @@ +/* + * uvc_v4l2.c -- USB Video Class driver - V4L2 API + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <linux/vmalloc.h> +#include <linux/mm.h> +#include <linux/wait.h> +#include <asm/atomic.h> + +#include <media/v4l2-common.h> + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * V4L2 interface + */ + +/* + * Mapping V4L2 controls to UVC controls can be straighforward if done well. + * Most of the UVC controls exist in V4L2, and can be mapped directly. Some + * must be grouped (for instance the Red Balance, Blue Balance and Do White + * Balance V4L2 controls use the White Balance Component UVC control) or + * otherwise translated. The approach we take here is to use a translation + * table for the controls which can be mapped directly, and handle the others + * manually. + */ +static int uvc_v4l2_query_menu(struct uvc_video_device *video, + struct v4l2_querymenu *query_menu) +{ + struct uvc_menu_info *menu_info; + struct uvc_control_mapping *mapping; + struct uvc_control *ctrl; + + ctrl = uvc_find_control(video, query_menu->id, &mapping); + if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) + return -EINVAL; + + if (query_menu->index >= mapping->menu_count) + return -EINVAL; + + menu_info = &mapping->menu_info[query_menu->index]; + strncpy(query_menu->name, menu_info->name, 32); + return 0; +} + +/* + * Find the frame interval closest to the requested frame interval for the + * given frame format and size. This should be done by the device as part of + * the Video Probe and Commit negotiation, but some hardware don't implement + * that feature. + */ +static __u32 uvc_try_frame_interval(struct uvc_frame *frame, __u32 interval) +{ + unsigned int i; + + if (frame->bFrameIntervalType) { + __u32 best = -1, dist; + + for (i = 0; i < frame->bFrameIntervalType; ++i) { + dist = interval > frame->dwFrameInterval[i] + ? interval - frame->dwFrameInterval[i] + : frame->dwFrameInterval[i] - interval; + + if (dist > best) + break; + + best = dist; + } + + interval = frame->dwFrameInterval[i-1]; + } else { + const __u32 min = frame->dwFrameInterval[0]; + const __u32 max = frame->dwFrameInterval[1]; + const __u32 step = frame->dwFrameInterval[2]; + + interval = min + (interval - min + step/2) / step * step; + if (interval > max) + interval = max; + } + + return interval; +} + +static int uvc_v4l2_try_format(struct uvc_video_device *video, + struct v4l2_format *fmt, struct uvc_streaming_control *probe, + struct uvc_format **uvc_format, struct uvc_frame **uvc_frame) +{ + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + __u16 rw, rh; + unsigned int d, maxd; + unsigned int i; + __u32 interval; + int ret = 0; + __u8 *fcc; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + fcc = (__u8 *)&fmt->fmt.pix.pixelformat; + uvc_trace(UVC_TRACE_FORMAT, "Trying format 0x%08x (%c%c%c%c): %ux%u.\n", + fmt->fmt.pix.pixelformat, + fcc[0], fcc[1], fcc[2], fcc[3], + fmt->fmt.pix.width, fmt->fmt.pix.height); + + /* Check if the hardware supports the requested format. */ + for (i = 0; i < video->streaming->nformats; ++i) { + format = &video->streaming->format[i]; + if (format->fcc == fmt->fmt.pix.pixelformat) + break; + } + + if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported format 0x%08x.\n", + fmt->fmt.pix.pixelformat); + return -EINVAL; + } + + /* Find the closest image size. The distance between image sizes is + * the size in pixels of the non-overlapping regions between the + * requested size and the frame-specified size. + */ + rw = fmt->fmt.pix.width; + rh = fmt->fmt.pix.height; + maxd = (unsigned int)-1; + + for (i = 0; i < format->nframes; ++i) { + __u16 w = format->frame[i].wWidth; + __u16 h = format->frame[i].wHeight; + + d = min(w, rw) * min(h, rh); + d = w*h + rw*rh - 2*d; + if (d < maxd) { + maxd = d; + frame = &format->frame[i]; + } + + if (maxd == 0) + break; + } + + if (frame == NULL) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported size %ux%u.\n", + fmt->fmt.pix.width, fmt->fmt.pix.height); + return -EINVAL; + } + + /* Use the default frame interval. */ + interval = frame->dwDefaultFrameInterval; + uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us " + "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval, + (100000000/interval)%10); + + /* Set the format index, frame index and frame interval. */ + memset(probe, 0, sizeof *probe); + probe->bmHint = 1; /* dwFrameInterval */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + probe->dwFrameInterval = uvc_try_frame_interval(frame, interval); + /* Some webcams stall the probe control set request when the + * dwMaxVideoFrameSize field is set to zero. The UVC specification + * clearly states that the field is read-only from the host, so this + * is a webcam bug. Set dwMaxVideoFrameSize to the value reported by + * the webcam to work around the problem. + * + * The workaround could probably be enabled for all webcams, so the + * quirk can be removed if needed. It's currently useful to detect + * webcam bugs and fix them before they hit the market (providing + * developers test their webcams with the Linux driver as well as with + * the Windows driver). + */ + if (video->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS) + probe->dwMaxVideoFrameSize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + /* Probe the device */ + if ((ret = uvc_probe_video(video, probe)) < 0) + goto done; + + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + if (uvc_format != NULL) + *uvc_format = format; + if (uvc_frame != NULL) + *uvc_frame = frame; + +done: + return ret; +} + +static int uvc_v4l2_get_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_format *format = video->streaming->cur_format; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (format == NULL || frame == NULL) + return -EINVAL; + + fmt->fmt.pix.pixelformat = format->fcc; + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = video->streaming->ctrl.dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + return 0; +} + +static int uvc_v4l2_set_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_streaming_control probe; + struct uvc_format *format; + struct uvc_frame *frame; + int ret; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame); + if (ret < 0) + return ret; + + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + + return 0; +} + +static int uvc_v4l2_get_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + uint32_t numerator, denominator; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + numerator = video->streaming->ctrl.dwFrameInterval; + denominator = 10000000; + uvc_simplify_fraction(&numerator, &denominator, 8, 333); + + memset(parm, 0, sizeof *parm); + parm->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; + parm->parm.capture.capturemode = 0; + parm->parm.capture.timeperframe.numerator = numerator; + parm->parm.capture.timeperframe.denominator = denominator; + parm->parm.capture.extendedmode = 0; + parm->parm.capture.readbuffers = 0; + + return 0; +} + +static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + struct uvc_frame *frame = video->streaming->cur_frame; + struct uvc_streaming_control probe; + uint32_t interval; + int ret; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + memcpy(&probe, &video->streaming->ctrl, sizeof probe); + interval = uvc_fraction_to_interval( + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator); + + uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n", + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator, + interval); + probe.dwFrameInterval = uvc_try_frame_interval(frame, interval); + + /* Probe the device with the new settings. */ + if ((ret = uvc_probe_video(video, &probe)) < 0) + return ret; + + /* Commit the new settings. */ + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + + /* Return the actual frame period. */ + parm->parm.capture.timeperframe.numerator = probe.dwFrameInterval; + parm->parm.capture.timeperframe.denominator = 10000000; + uvc_simplify_fraction(&parm->parm.capture.timeperframe.numerator, + &parm->parm.capture.timeperframe.denominator, + 8, 333); + + return 0; +} + +/* ------------------------------------------------------------------------ + * Privilege management + */ + +/* + * Privilege management is the multiple-open implementation basis. The current + * implementation is completely transparent for the end-user and doesn't + * require explicit use of the VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY ioctls. + * Those ioctls enable finer control on the device (by making possible for a + * user to request exclusive access to a device), but are not mature yet. + * Switching to the V4L2 priority mechanism might be considered in the future + * if this situation changes. + * + * Each open instance of a UVC device can either be in a privileged or + * unprivileged state. Only a single instance can be in a privileged state at + * a given time. Trying to perform an operation which requires privileges will + * automatically acquire the required privileges if possible, or return -EBUSY + * otherwise. Privileges are dismissed when closing the instance. + * + * Operations which require privileges are: + * + * - VIDIOC_S_INPUT + * - VIDIOC_S_PARM + * - VIDIOC_S_FMT + * - VIDIOC_TRY_FMT + * - VIDIOC_REQBUFS + */ +static int uvc_acquire_privileges(struct uvc_fh *handle) +{ + int ret = 0; + + /* Always succeed if the handle is already privileged. */ + if (handle->state == UVC_HANDLE_ACTIVE) + return 0; + + /* Check if the device already has a privileged handle. */ + mutex_lock(&uvc_driver.open_mutex); + if (atomic_inc_return(&handle->device->active) != 1) { + atomic_dec(&handle->device->active); + ret = -EBUSY; + goto done; + } + + handle->state = UVC_HANDLE_ACTIVE; + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static void uvc_dismiss_privileges(struct uvc_fh *handle) +{ + if (handle->state == UVC_HANDLE_ACTIVE) + atomic_dec(&handle->device->active); + + handle->state = UVC_HANDLE_PASSIVE; +} + +static int uvc_has_privileges(struct uvc_fh *handle) +{ + return handle->state == UVC_HANDLE_ACTIVE; +} + +/* ------------------------------------------------------------------------ + * V4L2 file operations + */ + +static int uvc_v4l2_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev; + struct uvc_video_device *video; + struct uvc_fh *handle; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n"); + mutex_lock(&uvc_driver.open_mutex); + vdev = video_devdata(file); + video = video_get_drvdata(vdev); + + if (video->dev->state & UVC_DEV_DISCONNECTED) { + ret = -ENODEV; + goto done; + } + + ret = usb_autopm_get_interface(video->dev->intf); + if (ret < 0) + goto done; + + /* Create the device handle. */ + handle = kzalloc(sizeof *handle, GFP_KERNEL); + if (handle == NULL) { + usb_autopm_put_interface(video->dev->intf); + ret = -ENOMEM; + goto done; + } + + handle->device = video; + handle->state = UVC_HANDLE_PASSIVE; + file->private_data = handle; + + kref_get(&video->dev->kref); + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static int uvc_v4l2_release(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n"); + + /* Only free resources if this is a privileged handle. */ + if (uvc_has_privileges(handle)) { + uvc_video_enable(video, 0); + + mutex_lock(&video->queue.mutex); + if (uvc_free_buffers(&video->queue) < 0) + uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to " + "free buffers.\n"); + mutex_unlock(&video->queue.mutex); + } + + /* Release the file handle. */ + uvc_dismiss_privileges(handle); + kfree(handle); + file->private_data = NULL; + + usb_autopm_put_interface(video->dev->intf); + kref_put(&video->dev->kref, uvc_delete); + return 0; +} + +static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + int ret = 0; + + if (uvc_trace_param & UVC_TRACE_IOCTL) + v4l_printk_ioctl(cmd); + + switch (cmd) { + /* Query capabilities */ + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = arg; + + memset(cap, 0, sizeof *cap); + strncpy(cap->driver, "uvcvideo", sizeof cap->driver); + strncpy(cap->card, vdev->name, 32); + strncpy(cap->bus_info, video->dev->udev->bus->bus_name, + sizeof cap->bus_info); + cap->version = DRIVER_VERSION_NUMBER; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE + | V4L2_CAP_STREAMING; + break; + } + + /* Get, Set & Query control */ + case VIDIOC_QUERYCTRL: + return uvc_query_v4l2_ctrl(video, arg); + + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_get(video, &xctrl); + uvc_ctrl_rollback(video); + if (ret >= 0) + ctrl->value = xctrl.value; + break; + } + + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + xctrl.value = ctrl->value; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_set(video, &xctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + return ret; + } + ret = uvc_ctrl_commit(video); + break; + } + + case VIDIOC_QUERYMENU: + return uvc_v4l2_query_menu(video, arg); + + case VIDIOC_G_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + uvc_ctrl_begin(video); + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_get(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + ctrls->error_idx = 0; + ret = uvc_ctrl_rollback(video); + break; + } + + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_TRY_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_set(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + + ctrls->error_idx = 0; + + if (cmd == VIDIOC_S_EXT_CTRLS) + ret = uvc_ctrl_commit(video); + else + ret = uvc_ctrl_rollback(video); + break; + } + + /* Get, Set & Enum input */ + case VIDIOC_ENUMINPUT: + { + const struct uvc_entity *selector = video->selector; + struct v4l2_input *input = arg; + struct uvc_entity *iterm = NULL; + u32 index = input->index; + int pin = 0; + + if (selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (index != 0) + return -EINVAL; + iterm = list_first_entry(&video->iterms, + struct uvc_entity, chain); + pin = iterm->id; + } else if (pin < selector->selector.bNrInPins) { + pin = selector->selector.baSourceID[index]; + list_for_each_entry(iterm, video->iterms.next, chain) { + if (iterm->id == pin) + break; + } + } + + if (iterm == NULL || iterm->id != pin) + return -EINVAL; + + memset(input, 0, sizeof *input); + input->index = index; + strncpy(input->name, iterm->name, sizeof input->name); + if (UVC_ENTITY_TYPE(iterm) == ITT_CAMERA) + input->type = V4L2_INPUT_TYPE_CAMERA; + break; + } + + case VIDIOC_G_INPUT: + { + u8 input; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + *(int *)arg = 0; + break; + } + + ret = uvc_query_ctrl(video->dev, GET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + if (ret < 0) + return ret; + + *(int *)arg = input - 1; + break; + } + + case VIDIOC_S_INPUT: + { + u8 input = *(u32 *)arg + 1; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (input != 1) + return -EINVAL; + break; + } + + if (input > video->selector->selector.bNrInPins) + return -EINVAL; + + return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + } + + /* Try, Get, Set & Enum format */ + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *fmt = arg; + struct uvc_format *format; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fmt->index >= video->streaming->nformats) + return -EINVAL; + + format = &video->streaming->format[fmt->index]; + fmt->flags = 0; + if (format->flags & UVC_FMT_FLAG_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + strncpy(fmt->description, format->name, + sizeof fmt->description); + fmt->description[sizeof fmt->description - 1] = 0; + fmt->pixelformat = format->fcc; + break; + } + + case VIDIOC_TRY_FMT: + { + struct uvc_streaming_control probe; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_try_format(video, arg, &probe, NULL, NULL); + } + + case VIDIOC_S_FMT: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_format(video, arg); + + case VIDIOC_G_FMT: + return uvc_v4l2_get_format(video, arg); + + /* Frame size enumeration */ + case VIDIOC_ENUM_FRAMESIZES: + { + struct v4l2_frmsizeenum *fsize = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame; + int i; + + /* Look for the given pixel format */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fsize->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + if (fsize->index >= format->nframes) + return -EINVAL; + + frame = &format->frame[fsize->index]; + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = frame->wWidth; + fsize->discrete.height = frame->wHeight; + break; + } + + /* Frame interval enumeration */ + case VIDIOC_ENUM_FRAMEINTERVALS: + { + struct v4l2_frmivalenum *fival = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + int i; + + /* Look for the given pixel format and frame size */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fival->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + for (i = 0; i < format->nframes; i++) { + if (format->frame[i].wWidth == fival->width && + format->frame[i].wHeight == fival->height) { + frame = &format->frame[i]; + break; + } + } + if (frame == NULL) + return -EINVAL; + + if (frame->bFrameIntervalType) { + if (fival->index >= frame->bFrameIntervalType) + return -EINVAL; + + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete.numerator = + frame->dwFrameInterval[fival->index]; + fival->discrete.denominator = 10000000; + uvc_simplify_fraction(&fival->discrete.numerator, + &fival->discrete.denominator, 8, 333); + } else { + fival->type = V4L2_FRMIVAL_TYPE_STEPWISE; + fival->stepwise.min.numerator = + frame->dwFrameInterval[0]; + fival->stepwise.min.denominator = 10000000; + fival->stepwise.max.numerator = + frame->dwFrameInterval[1]; + fival->stepwise.max.denominator = 10000000; + fival->stepwise.step.numerator = + frame->dwFrameInterval[2]; + fival->stepwise.step.denominator = 10000000; + uvc_simplify_fraction(&fival->stepwise.min.numerator, + &fival->stepwise.min.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.max.numerator, + &fival->stepwise.max.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.step.numerator, + &fival->stepwise.step.denominator, 8, 333); + } + break; + } + + /* Get & Set streaming parameters */ + case VIDIOC_G_PARM: + return uvc_v4l2_get_streamparm(video, arg); + + case VIDIOC_S_PARM: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_streamparm(video, arg); + + /* Cropping and scaling */ + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *ccap = arg; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (ccap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + ccap->bounds.left = 0; + ccap->bounds.top = 0; + ccap->bounds.width = frame->wWidth; + ccap->bounds.height = frame->wHeight; + + ccap->defrect = ccap->bounds; + + ccap->pixelaspect.numerator = 1; + ccap->pixelaspect.denominator = 1; + break; + } + + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + return -EINVAL; + + /* Buffers & streaming */ + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *rb = arg; + unsigned int bufsize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + ret = uvc_alloc_buffers(&video->queue, rb->count, bufsize); + if (ret < 0) + return ret; + + if (!(video->streaming->cur_format->flags & + UVC_FMT_FLAG_COMPRESSED)) + video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; + + rb->count = ret; + ret = 0; + break; + } + + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *buf = arg; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_query_buffer(&video->queue, buf); + } + + case VIDIOC_QBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_queue_buffer(&video->queue, arg); + + case VIDIOC_DQBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_dequeue_buffer(&video->queue, arg, + file->f_flags & O_NONBLOCK); + + case VIDIOC_STREAMON: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + if ((ret = uvc_video_enable(video, 1)) < 0) + return ret; + break; + } + + case VIDIOC_STREAMOFF: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_video_enable(video, 0); + } + + /* Analog video standards make no sense for digital cameras. */ + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYSTD: + case VIDIOC_G_STD: + case VIDIOC_S_STD: + + case VIDIOC_OVERLAY: + + case VIDIOC_ENUMAUDIO: + case VIDIOC_ENUMAUDOUT: + + case VIDIOC_ENUMOUTPUT: + uvc_trace(UVC_TRACE_IOCTL, "Unsupported ioctl 0x%08x\n", cmd); + return -EINVAL; + + /* Dynamic controls. */ + case UVCIOC_CTRL_ADD: + { + struct uvc_xu_control_info *xinfo = arg; + struct uvc_control_info *info; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + info = kmalloc(sizeof *info, GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + memcpy(info->entity, xinfo->entity, sizeof info->entity); + info->index = xinfo->index; + info->selector = xinfo->selector; + info->size = xinfo->size; + info->flags = xinfo->flags; + + info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX | + UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF; + + ret = uvc_ctrl_add_info(info); + if (ret < 0) + kfree(info); + break; + } + + case UVCIOC_CTRL_MAP: + { + struct uvc_xu_control_mapping *xmap = arg; + struct uvc_control_mapping *map; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + map = kmalloc(sizeof *map, GFP_KERNEL); + if (map == NULL) + return -ENOMEM; + + map->id = xmap->id; + memcpy(map->name, xmap->name, sizeof map->name); + memcpy(map->entity, xmap->entity, sizeof map->entity); + map->selector = xmap->selector; + map->size = xmap->size; + map->offset = xmap->offset; + map->v4l2_type = xmap->v4l2_type; + map->data_type = xmap->data_type; + + ret = uvc_ctrl_add_mapping(map); + if (ret < 0) + kfree(map); + break; + } + + case UVCIOC_CTRL_GET: + return uvc_xu_ctrl_query(video, arg, 0); + + case UVCIOC_CTRL_SET: + return uvc_xu_ctrl_query(video, arg, 1); + + default: + if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg, + uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) + uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", + cmd); + return ret; + } + + return ret; +} + +static int uvc_v4l2_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_ioctl\n"); + return video_usercopy(inode, file, cmd, arg, uvc_v4l2_do_ioctl); +} + +static ssize_t uvc_v4l2_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_read: not implemented.\n"); + return -ENODEV; +} + +/* + * VMA operations. + */ +static void uvc_vm_open(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count++; +} + +static void uvc_vm_close(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count--; +} + +static struct vm_operations_struct uvc_vm_ops = { + .open = uvc_vm_open, + .close = uvc_vm_close, +}; + +static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_buffer *buffer; + struct page *page; + unsigned long addr, start, size; + unsigned int i; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n"); + + start = vma->vm_start; + size = vma->vm_end - vma->vm_start; + + mutex_lock(&video->queue.mutex); + + for (i = 0; i < video->queue.count; ++i) { + buffer = &video->queue.buffer[i]; + if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) + break; + } + + if (i == video->queue.count || size != video->queue.buf_size) { + ret = -EINVAL; + goto done; + } + + /* + * VM_IO marks the area as being an mmaped region for I/O to a + * device. It also prevents the region from being core dumped. + */ + vma->vm_flags |= VM_IO; + + addr = (unsigned long)video->queue.mem + buffer->buf.m.offset; + while (size > 0) { + page = vmalloc_to_page((void *)addr); + if ((ret = vm_insert_page(vma, start, page)) < 0) + goto done; + + start += PAGE_SIZE; + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &uvc_vm_ops; + vma->vm_private_data = buffer; + uvc_vm_open(vma); + +done: + mutex_unlock(&video->queue.mutex); + return ret; +} + +static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n"); + + return uvc_queue_poll(&video->queue, file, wait); +} + +struct file_operations uvc_fops = { + .owner = THIS_MODULE, + .open = uvc_v4l2_open, + .release = uvc_v4l2_release, + .ioctl = uvc_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, + .read = uvc_v4l2_read, + .mmap = uvc_v4l2_mmap, + .poll = uvc_v4l2_poll, +}; diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c new file mode 100644 index 00000000000..6faf1fb2161 --- /dev/null +++ b/drivers/media/video/uvc/uvc_video.c @@ -0,0 +1,934 @@ +/* + * uvc_video.c -- USB Video Class driver - Video handling + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <linux/vmalloc.h> +#include <linux/wait.h> +#include <asm/atomic.h> +#include <asm/unaligned.h> + +#include <media/v4l2-common.h> + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static int __uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size, + int timeout) +{ + __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE; + unsigned int pipe; + int ret; + + pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0) + : usb_sndctrlpipe(dev->udev, 0); + type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT; + + ret = usb_control_msg(dev->udev, pipe, query, type, cs << 8, + unit << 8 | intfnum, data, size, timeout); + + if (ret != size) { + uvc_printk(KERN_ERR, "Failed to query (%u) UVC control %u " + "(unit %u) : %d (exp. %u).\n", query, cs, unit, ret, + size); + return -EIO; + } + + return 0; +} + +int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size) +{ + return __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size, + UVC_CTRL_CONTROL_TIMEOUT); +} + +static void uvc_fixup_buffer_size(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl) +{ + struct uvc_format *format; + struct uvc_frame *frame; + + if (ctrl->bFormatIndex <= 0 || + ctrl->bFormatIndex > video->streaming->nformats) + return; + + format = &video->streaming->format[ctrl->bFormatIndex - 1]; + + if (ctrl->bFrameIndex <= 0 || + ctrl->bFrameIndex > format->nframes) + return; + + frame = &format->frame[ctrl->bFrameIndex - 1]; + + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) || + (ctrl->dwMaxVideoFrameSize == 0 && + video->dev->uvc_version < 0x0110)) + ctrl->dwMaxVideoFrameSize = + frame->dwMaxVideoFrameBufferSize; +} + +static int uvc_get_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe, __u8 query) +{ + __u8 data[34]; + __u8 size; + int ret; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); + + if (ret < 0) + return ret; + + ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]); + ctrl->bFormatIndex = data[2]; + ctrl->bFrameIndex = data[3]; + ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]); + ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]); + ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]); + ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]); + ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]); + ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]); + ctrl->dwMaxVideoFrameSize = + le32_to_cpu(get_unaligned((__le32 *)&data[18])); + ctrl->dwMaxPayloadTransferSize = + le32_to_cpu(get_unaligned((__le32 *)&data[22])); + + if (size == 34) { + ctrl->dwClockFrequency = + le32_to_cpu(get_unaligned((__le32 *)&data[26])); + ctrl->bmFramingInfo = data[30]; + ctrl->bPreferedVersion = data[31]; + ctrl->bMinVersion = data[32]; + ctrl->bMaxVersion = data[33]; + } else { + ctrl->dwClockFrequency = video->dev->clock_frequency; + ctrl->bmFramingInfo = 0; + ctrl->bPreferedVersion = 0; + ctrl->bMinVersion = 0; + ctrl->bMaxVersion = 0; + } + + /* Some broken devices return a null or wrong dwMaxVideoFrameSize. + * Try to get the value from the format and frame descriptor. + */ + uvc_fixup_buffer_size(video, ctrl); + + return 0; +} + +int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe) +{ + __u8 data[34]; + __u8 size; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + memset(data, 0, sizeof data); + + *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint); + data[2] = ctrl->bFormatIndex; + data[3] = ctrl->bFrameIndex; + *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval); + *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate); + *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate); + *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); + *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); + *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); + /* Note: Some of the fields below are not required for IN devices (see + * UVC spec, 4.3.1.1), but we still copy them in case support for OUT + * devices is added in the future. */ + put_unaligned(cpu_to_le32(ctrl->dwMaxVideoFrameSize), + (__le32 *)&data[18]); + put_unaligned(cpu_to_le32(ctrl->dwMaxPayloadTransferSize), + (__le32 *)&data[22]); + + if (size == 34) { + put_unaligned(cpu_to_le32(ctrl->dwClockFrequency), + (__le32 *)&data[26]); + data[30] = ctrl->bmFramingInfo; + data[31] = ctrl->bPreferedVersion; + data[32] = ctrl->bMinVersion; + data[33] = ctrl->bMaxVersion; + } + + return __uvc_query_ctrl(video->dev, SET_CUR, 0, + video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); +} + +int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe) +{ + struct uvc_streaming_control probe_min, probe_max; + __u16 bandwidth; + unsigned int i; + int ret; + + mutex_lock(&video->streaming->mutex); + + /* Perform probing. The device should adjust the requested values + * according to its capabilities. However, some devices, namely the + * first generation UVC Logitech webcams, don't implement the Video + * Probe control properly, and just return the needed bandwidth. For + * that reason, if the needed bandwidth exceeds the maximum available + * bandwidth, try to lower the quality. + */ + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0) + goto done; + + /* Get the minimum and maximum values for compression settings. */ + if (!(video->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) { + ret = uvc_get_video_ctrl(video, &probe_min, 1, GET_MIN); + if (ret < 0) + goto done; + ret = uvc_get_video_ctrl(video, &probe_max, 1, GET_MAX); + if (ret < 0) + goto done; + + probe->wCompQuality = probe_max.wCompQuality; + } + + for (i = 0; i < 2; ++i) { + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0 || + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + goto done; + + if (video->streaming->intf->num_altsetting == 1) + break; + + bandwidth = probe->dwMaxPayloadTransferSize; + if (bandwidth <= video->streaming->maxpsize) + break; + + if (video->dev->quirks & UVC_QUIRK_PROBE_MINMAX) { + ret = -ENOSPC; + goto done; + } + + /* TODO: negotiate compression parameters */ + probe->wKeyFrameRate = probe_min.wKeyFrameRate; + probe->wPFrameRate = probe_min.wPFrameRate; + probe->wCompQuality = probe_max.wCompQuality; + probe->wCompWindowSize = probe_min.wCompWindowSize; + } + +done: + mutex_unlock(&video->streaming->mutex); + return ret; +} + +/* ------------------------------------------------------------------------ + * Video codecs + */ + +/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */ +#define UVC_STREAM_EOH (1 << 7) +#define UVC_STREAM_ERR (1 << 6) +#define UVC_STREAM_STI (1 << 5) +#define UVC_STREAM_RES (1 << 4) +#define UVC_STREAM_SCR (1 << 3) +#define UVC_STREAM_PTS (1 << 2) +#define UVC_STREAM_EOF (1 << 1) +#define UVC_STREAM_FID (1 << 0) + +/* Video payload decoding is handled by uvc_video_decode_start(), + * uvc_video_decode_data() and uvc_video_decode_end(). + * + * uvc_video_decode_start is called with URB data at the start of a bulk or + * isochronous payload. It processes header data and returns the header size + * in bytes if successful. If an error occurs, it returns a negative error + * code. The following error codes have special meanings. + * + * - EAGAIN informs the caller that the current video buffer should be marked + * as done, and that the function should be called again with the same data + * and a new video buffer. This is used when end of frame conditions can be + * reliably detected at the beginning of the next frame only. + * + * If an error other than -EAGAIN is returned, the caller will drop the current + * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be + * made until the next payload. -ENODATA can be used to drop the current + * payload if no other error code is appropriate. + * + * uvc_video_decode_data is called for every URB with URB data. It copies the + * data to the video buffer. + * + * uvc_video_decode_end is called with header data at the end of a bulk or + * isochronous payload. It performs any additional header data processing and + * returns 0 or a negative error code if an error occured. As header data have + * already been processed by uvc_video_decode_start, this functions isn't + * required to perform sanity checks a second time. + * + * For isochronous transfers where a payload is always transfered in a single + * URB, the three functions will be called in a row. + * + * To let the decoder process header data and update its internal state even + * when no video buffer is available, uvc_video_decode_start must be prepared + * to be called with a NULL buf parameter. uvc_video_decode_data and + * uvc_video_decode_end will never be called with a NULL buffer. + */ +static int uvc_video_decode_start(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + __u8 fid; + + /* Sanity checks: + * - packet must be at least 2 bytes long + * - bHeaderLength value must be at least 2 bytes (see above) + * - bHeaderLength value can't be larger than the packet size. + */ + if (len < 2 || data[0] < 2 || data[0] > len) + return -EINVAL; + + /* Skip payloads marked with the error bit ("error frames"). */ + if (data[1] & UVC_STREAM_ERR) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (error bit " + "set).\n"); + return -ENODATA; + } + + fid = data[1] & UVC_STREAM_FID; + + /* Store the payload FID bit and return immediately when the buffer is + * NULL. + */ + if (buf == NULL) { + video->last_fid = fid; + return -ENODATA; + } + + /* Synchronize to the input stream by waiting for the FID bit to be + * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. + * queue->last_fid is initialized to -1, so the first isochronous + * frame will always be in sync. + * + * If the device doesn't toggle the FID bit, invert video->last_fid + * when the EOF bit is set to force synchronisation on the next packet. + */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (fid == video->last_fid) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of " + "sync).\n"); + if ((video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) && + (data[1] & UVC_STREAM_EOF)) + video->last_fid ^= UVC_STREAM_FID; + return -ENODATA; + } + + /* TODO: Handle PTS and SCR. */ + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * End of frame detection is better implemented by checking the EOF + * bit (FID bit toggling is delayed by one frame compared to the EOF + * bit), but some devices don't set the bit at end of frame (and the + * last payload can be lost anyway). We thus must check if the FID has + * been toggled. + * + * queue->last_fid is initialized to -1, so the first isochronous + * frame will never trigger an end of frame detection. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. This also + * avoids detecting and of frame conditions at FID toggling if the + * previous payload had the EOF bit set. + */ + if (fid != video->last_fid && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " + "toggled).\n"); + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + video->last_fid = fid; + + return data[0]; +} + +static void uvc_video_decode_data(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + struct uvc_video_queue *queue = &video->queue; + unsigned int maxlen, nbytes; + void *mem; + + if (len <= 0) + return; + + /* Copy the video data to the buffer. */ + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min((unsigned int)len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + /* Complete the current frame if the buffer size was exceeded. */ + if (len > maxlen) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } +} + +static void uvc_video_decode_end(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + /* Mark the buffer as done if the EOF marker is set. */ + if (data[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); + if (data[0] == len) + uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); + buf->state = UVC_BUF_STATE_DONE; + if (video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) + video->last_fid ^= UVC_STREAM_FID; + } +} + +/* ------------------------------------------------------------------------ + * URB handling + */ + +/* + * Completion handler for video URBs. + */ +static void uvc_video_decode_isoc(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", urb->iso_frame_desc[i].status); + continue; + } + + /* Decode the payload header. */ + mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + do { + ret = uvc_video_decode_start(video, buf, mem, + urb->iso_frame_desc[i].actual_length); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + if (ret < 0) + continue; + + /* Decode the payload data. */ + uvc_video_decode_data(video, buf, mem + ret, + urb->iso_frame_desc[i].actual_length - ret); + + /* Process the header again. */ + uvc_video_decode_end(video, buf, mem, ret); + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } +} + +static void uvc_video_decode_bulk(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int len, ret; + + mem = urb->transfer_buffer; + len = urb->actual_length; + video->bulk.payload_size += len; + + /* If the URB is the first of its payload, decode and save the + * header. + */ + if (video->bulk.header_size == 0) { + do { + ret = uvc_video_decode_start(video, buf, mem, len); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + /* If an error occured skip the rest of the payload. */ + if (ret < 0 || buf == NULL) { + video->bulk.skip_payload = 1; + return; + } + + video->bulk.header_size = ret; + memcpy(video->bulk.header, mem, video->bulk.header_size); + + mem += ret; + len -= ret; + } + + /* The buffer queue might have been cancelled while a bulk transfer + * was in progress, so we can reach here with buf equal to NULL. Make + * sure buf is never dereferenced if NULL. + */ + + /* Process video data. */ + if (!video->bulk.skip_payload && buf != NULL) + uvc_video_decode_data(video, buf, mem, len); + + /* Detect the payload end by a URB smaller than the maximum size (or + * a payload size equal to the maximum) and process the header again. + */ + if (urb->actual_length < urb->transfer_buffer_length || + video->bulk.payload_size >= video->bulk.max_payload_size) { + if (!video->bulk.skip_payload && buf != NULL) { + uvc_video_decode_end(video, buf, video->bulk.header, + video->bulk.header_size); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } + + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + } +} + +static void uvc_video_complete(struct urb *urb) +{ + struct uvc_video_device *video = urb->context; + struct uvc_video_queue *queue = &video->queue; + struct uvc_buffer *buf = NULL; + unsigned long flags; + int ret; + + switch (urb->status) { + case 0: + break; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in video " + "completion handler.\n", urb->status); + + case -ENOENT: /* usb_kill_urb() called. */ + if (video->frozen) + return; + + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + uvc_queue_cancel(queue, urb->status == -ESHUTDOWN); + return; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (!list_empty(&queue->irqqueue)) + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + spin_unlock_irqrestore(&queue->irqlock, flags); + + video->decode(urb, video, buf); + + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n", + ret); + } +} + +/* + * Uninitialize isochronous/bulk URBs and free transfer buffers. + */ +static void uvc_uninit_video(struct uvc_video_device *video) +{ + struct urb *urb; + unsigned int i; + + for (i = 0; i < UVC_URBS; ++i) { + if ((urb = video->urb[i]) == NULL) + continue; + + usb_kill_urb(urb); + /* urb->transfer_buffer_length is not touched by USB core, so + * we can use it here as the buffer length. + */ + if (video->urb_buffer[i]) { + usb_buffer_free(video->dev->udev, + urb->transfer_buffer_length, + video->urb_buffer[i], urb->transfer_dma); + video->urb_buffer[i] = NULL; + } + + usb_free_urb(urb); + video->urb[i] = NULL; + } +} + +/* + * Initialize isochronous URBs and allocate transfer buffers. The packet size + * is given by the endpoint. + */ +static int uvc_init_video_isoc(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int npackets, i, j; + __u16 psize; + __u32 size; + + /* Compute the number of isochronous packets to allocate by dividing + * the maximum video frame size by the packet size. Limit the result + * to UVC_MAX_ISO_PACKETS. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + + size = video->streaming->ctrl.dwMaxVideoFrameSize; + if (size > UVC_MAX_FRAME_SIZE) + return -EINVAL; + + npackets = (size + psize - 1) / psize; + if (npackets > UVC_MAX_ISO_PACKETS) + npackets = UVC_MAX_ISO_PACKETS; + + size = npackets * psize; + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(npackets, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + urb->dev = video->dev->udev; + urb->context = video; + urb->pipe = usb_rcvisocpipe(video->dev->udev, + ep->desc.bEndpointAddress); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = ep->desc.bInterval; + urb->transfer_buffer = video->urb_buffer[i]; + urb->complete = uvc_video_complete; + urb->number_of_packets = npackets; + urb->transfer_buffer_length = size; + + for (j = 0; j < npackets; ++j) { + urb->iso_frame_desc[j].offset = j * psize; + urb->iso_frame_desc[j].length = psize; + } + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize bulk URBs and allocate transfer buffers. The packet size is + * given by the endpoint. + */ +static int uvc_init_video_bulk(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int pipe, i; + __u16 psize; + __u32 size; + + /* Compute the bulk URB size. Some devices set the maximum payload + * size to a value too high for memory-constrained devices. We must + * then transfer the payload accross multiple URBs. To be consistant + * with isochronous mode, allocate maximum UVC_MAX_ISO_PACKETS per bulk + * URB. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff; + size = video->streaming->ctrl.dwMaxPayloadTransferSize; + video->bulk.max_payload_size = size; + if (size > psize * UVC_MAX_ISO_PACKETS) + size = psize * UVC_MAX_ISO_PACKETS; + + pipe = usb_rcvbulkpipe(video->dev->udev, ep->desc.bEndpointAddress); + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + usb_fill_bulk_urb(urb, video->dev->udev, pipe, + video->urb_buffer[i], size, uvc_video_complete, + video); + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize isochronous/bulk URBs and allocate transfer buffers. + */ +static int uvc_init_video(struct uvc_video_device *video) +{ + struct usb_interface *intf = video->streaming->intf; + struct usb_host_interface *alts; + struct usb_host_endpoint *ep = NULL; + int intfnum = video->streaming->intfnum; + unsigned int bandwidth, psize, i; + int ret; + + video->last_fid = -1; + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + + if (intf->num_altsetting > 1) { + /* Isochronous endpoint, select the alternate setting. */ + bandwidth = video->streaming->ctrl.dwMaxPayloadTransferSize; + + if (bandwidth == 0) { + uvc_printk(KERN_WARNING, "device %s requested null " + "bandwidth, defaulting to lowest.\n", + video->vdev->name); + bandwidth = 1; + } + + for (i = 0; i < intf->num_altsetting; ++i) { + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + video->streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + /* Check if the bandwidth is high enough. */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize >= bandwidth) + break; + } + + if (i >= intf->num_altsetting) + return -EIO; + + if ((ret = usb_set_interface(video->dev->udev, intfnum, i)) < 0) + return ret; + + ret = uvc_init_video_isoc(video, ep); + } else { + /* Bulk endpoint, proceed to URB initialization. */ + ep = uvc_find_endpoint(&intf->altsetting[0], + video->streaming->header.bEndpointAddress); + if (ep == NULL) + return -EIO; + + ret = uvc_init_video_bulk(video, ep); + } + + if (ret < 0) + return ret; + + /* Submit the URBs. */ + for (i = 0; i < UVC_URBS; ++i) { + if ((ret = usb_submit_urb(video->urb[i], GFP_KERNEL)) < 0) { + uvc_printk(KERN_ERR, "Failed to submit URB %u " + "(%d).\n", i, ret); + uvc_uninit_video(video); + return ret; + } + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Stop streaming without disabling the video queue. + * + * To let userspace applications resume without trouble, we must not touch the + * video buffers in any way. We mark the device as frozen to make sure the URB + * completion handler won't try to cancel the queue when we kill the URBs. + */ +int uvc_video_suspend(struct uvc_video_device *video) +{ + if (!uvc_queue_streaming(&video->queue)) + return 0; + + video->frozen = 1; + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + return 0; +} + +/* + * Reconfigure the video interface and restart streaming if it was enable + * before suspend. + * + * If an error occurs, disable the video queue. This will wake all pending + * buffers, making sure userspace applications are notified of the problem + * instead of waiting forever. + */ +int uvc_video_resume(struct uvc_video_device *video) +{ + int ret; + + video->frozen = 0; + + if ((ret = uvc_set_video_ctrl(video, &video->streaming->ctrl, 0)) < 0) { + uvc_queue_enable(&video->queue, 0); + return ret; + } + + if (!uvc_queue_streaming(&video->queue)) + return 0; + + if ((ret = uvc_init_video(video)) < 0) + uvc_queue_enable(&video->queue, 0); + + return ret; +} + +/* ------------------------------------------------------------------------ + * Video device + */ + +/* + * Initialize the UVC video device by retrieving the default format and + * committing it. + * + * Some cameras (namely the Fuji Finepix) set the format and frame + * indexes to zero. The UVC standard doesn't clearly make this a spec + * violation, so try to silently fix the values if possible. + * + * This function is called before registering the device with V4L. + */ +int uvc_video_init(struct uvc_video_device *video) +{ + struct uvc_streaming_control *probe = &video->streaming->ctrl; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + unsigned int i; + int ret; + + if (video->streaming->nformats == 0) { + uvc_printk(KERN_INFO, "No supported video formats found.\n"); + return -EINVAL; + } + + /* Alternate setting 0 should be the default, yet the XBox Live Vision + * Cam (and possibly other devices) crash or otherwise misbehave if + * they don't receive a SET_INTERFACE request before any other video + * control request. + */ + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + + /* Some webcams don't suport GET_DEF request on the probe control. We + * fall back to GET_CUR if GET_DEF fails. + */ + if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + return ret; + + /* Check if the default format descriptor exists. Use the first + * available format otherwise. + */ + for (i = video->streaming->nformats; i > 0; --i) { + format = &video->streaming->format[i-1]; + if (format->index == probe->bFormatIndex) + break; + } + + if (format->nframes == 0) { + uvc_printk(KERN_INFO, "No frame descriptor found for the " + "default format.\n"); + return -EINVAL; + } + + /* Zero bFrameIndex might be correct. Stream-based formats (including + * MPEG-2 TS and DV) do not support frames but have a dummy frame + * descriptor with bFrameIndex set to zero. If the default frame + * descriptor is not found, use the first avalable frame. + */ + for (i = format->nframes; i > 0; --i) { + frame = &format->frame[i-1]; + if (frame->bFrameIndex == probe->bFrameIndex) + break; + } + + /* Commit the default settings. */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + if ((ret = uvc_set_video_ctrl(video, probe, 0)) < 0) + return ret; + + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + atomic_set(&video->active, 0); + + /* Select the video decoding function */ + if (video->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT) + video->decode = uvc_video_decode_isight; + else if (video->streaming->intf->num_altsetting > 1) + video->decode = uvc_video_decode_isoc; + else + video->decode = uvc_video_decode_bulk; + + return 0; +} + +/* + * Enable or disable the video stream. + */ +int uvc_video_enable(struct uvc_video_device *video, int enable) +{ + int ret; + + if (!enable) { + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, + video->streaming->intfnum, 0); + uvc_queue_enable(&video->queue, 0); + return 0; + } + + if ((ret = uvc_queue_enable(&video->queue, 1)) < 0) + return ret; + + return uvc_init_video(video); +} diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h new file mode 100644 index 00000000000..a995a780db1 --- /dev/null +++ b/drivers/media/video/uvc/uvcvideo.h @@ -0,0 +1,796 @@ +#ifndef _USB_VIDEO_H_ +#define _USB_VIDEO_H_ + +#include <linux/kernel.h> +#include <linux/videodev2.h> + + +/* + * Dynamic controls + */ + +/* Data types for UVC control data */ +#define UVC_CTRL_DATA_TYPE_RAW 0 +#define UVC_CTRL_DATA_TYPE_SIGNED 1 +#define UVC_CTRL_DATA_TYPE_UNSIGNED 2 +#define UVC_CTRL_DATA_TYPE_BOOLEAN 3 +#define UVC_CTRL_DATA_TYPE_ENUM 4 +#define UVC_CTRL_DATA_TYPE_BITMASK 5 + +/* Control flags */ +#define UVC_CONTROL_SET_CUR (1 << 0) +#define UVC_CONTROL_GET_CUR (1 << 1) +#define UVC_CONTROL_GET_MIN (1 << 2) +#define UVC_CONTROL_GET_MAX (1 << 3) +#define UVC_CONTROL_GET_RES (1 << 4) +#define UVC_CONTROL_GET_DEF (1 << 5) +/* Control should be saved at suspend and restored at resume. */ +#define UVC_CONTROL_RESTORE (1 << 6) +/* Control can be updated by the camera. */ +#define UVC_CONTROL_AUTO_UPDATE (1 << 7) + +#define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \ + UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \ + UVC_CONTROL_GET_DEF) + +struct uvc_xu_control_info { + __u8 entity[16]; + __u8 index; + __u8 selector; + __u16 size; + __u32 flags; +}; + +struct uvc_xu_control_mapping { + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; +}; + +struct uvc_xu_control { + __u8 unit; + __u8 selector; + __u16 size; + __u8 __user *data; +}; + +#define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info) +#define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping) +#define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control) +#define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control) + +#ifdef __KERNEL__ + +#include <linux/poll.h> + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 + +#define PC_PROTOCOL_UNDEFINED 0x00 + +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 + +/* VideoControl class specific interface descriptor */ +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 + +/* VideoStreaming class specific interface descriptor */ +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 + +/* Endpoint type */ +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 + +/* Request codes */ +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 + +/* VideoControl interface controls */ +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* Terminal controls */ +#define TE_CONTROL_UNDEFINED 0x00 + +/* Selector Unit controls */ +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 + +/* Camera Terminal controls */ +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 + +/* Processing Unit controls */ +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +#define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 +#define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 +#define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 + +/* VideoStreaming interface controls */ +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 + +/* Input Terminal types */ +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* Output Terminal types */ +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* External Terminal types */ +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 + +#define UVC_TERM_INPUT 0x0000 +#define UVC_TERM_OUTPUT 0x8000 + +#define UVC_ENTITY_TYPE(entity) ((entity)->type & 0x7fff) +#define UVC_ENTITY_IS_UNIT(entity) (((entity)->type & 0xff00) == 0) +#define UVC_ENTITY_IS_TERM(entity) (((entity)->type & 0xff00) != 0) +#define UVC_ENTITY_IS_ITERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_INPUT) +#define UVC_ENTITY_IS_OTERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_OUTPUT) + +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +/* ------------------------------------------------------------------------ + * GUIDs + */ +#define UVC_GUID_UVC_CAMERA \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} +#define UVC_GUID_UVC_OUTPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02} +#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03} +#define UVC_GUID_UVC_PROCESSING \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01} +#define UVC_GUID_UVC_SELECTOR \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02} + +#define UVC_GUID_LOGITECH_DEV_INFO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1e} +#define UVC_GUID_LOGITECH_USER_HW \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1f} +#define UVC_GUID_LOGITECH_VIDEO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x50} +#define UVC_GUID_LOGITECH_MOTOR \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x56} + +#define UVC_GUID_FORMAT_MJPEG \ + { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YUY2 \ + { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_NV12 \ + { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YV12 \ + { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_I420 \ + { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_UYVY \ + { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y800 \ + { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BY8 \ + { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + + +/* ------------------------------------------------------------------------ + * Driver specific constants. + */ + +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 1, 0) + +/* Number of isochronous URBs. */ +#define UVC_URBS 5 +/* Maximum number of packets per isochronous URB. */ +#define UVC_MAX_ISO_PACKETS 40 +/* Maximum frame size in bytes, for sanity checking. */ +#define UVC_MAX_FRAME_SIZE (16*1024*1024) +/* Maximum number of video buffers. */ +#define UVC_MAX_VIDEO_BUFFERS 32 + +#define UVC_CTRL_CONTROL_TIMEOUT 300 +#define UVC_CTRL_STREAMING_TIMEOUT 1000 + +/* Devices quirks */ +#define UVC_QUIRK_STATUS_INTERVAL 0x00000001 +#define UVC_QUIRK_PROBE_MINMAX 0x00000002 +#define UVC_QUIRK_PROBE_EXTRAFIELDS 0x00000004 +#define UVC_QUIRK_BUILTIN_ISIGHT 0x00000008 +#define UVC_QUIRK_STREAM_NO_FID 0x00000010 +#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020 + +/* Format flags */ +#define UVC_FMT_FLAG_COMPRESSED 0x00000001 +#define UVC_FMT_FLAG_STREAM 0x00000002 + +/* ------------------------------------------------------------------------ + * Structures. + */ + +struct uvc_device; + +/* TODO: Put the most frequently accessed fields at the beginning of + * structures to maximize cache efficiency. + */ +struct uvc_streaming_control { + __u16 bmHint; + __u8 bFormatIndex; + __u8 bFrameIndex; + __u32 dwFrameInterval; + __u16 wKeyFrameRate; + __u16 wPFrameRate; + __u16 wCompQuality; + __u16 wCompWindowSize; + __u16 wDelay; + __u32 dwMaxVideoFrameSize; + __u32 dwMaxPayloadTransferSize; + __u32 dwClockFrequency; + __u8 bmFramingInfo; + __u8 bPreferedVersion; + __u8 bMinVersion; + __u8 bMaxVersion; +}; + +struct uvc_menu_info { + __u32 value; + __u8 name[32]; +}; + +struct uvc_control_info { + struct list_head list; + struct list_head mappings; + + __u8 entity[16]; + __u8 index; + __u8 selector; + + __u16 size; + __u32 flags; +}; + +struct uvc_control_mapping { + struct list_head list; + + struct uvc_control_info *ctrl; + + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; + + struct uvc_menu_info *menu_info; + __u32 menu_count; +}; + +struct uvc_control { + struct uvc_entity *entity; + struct uvc_control_info *info; + + __u8 index; /* Used to match the uvc_control entry with a + uvc_control_info. */ + __u8 dirty : 1, + loaded : 1, + modified : 1; + + __u8 *data; +}; + +struct uvc_format_desc { + char *name; + __u8 guid[16]; + __u32 fcc; +}; + +/* The term 'entity' refers to both UVC units and UVC terminals. + * + * The type field is either the terminal type (wTerminalType in the terminal + * descriptor), or the unit type (bDescriptorSubtype in the unit descriptor). + * As the bDescriptorSubtype field is one byte long, the type value will + * always have a null MSB for units. All terminal types defined by the UVC + * specification have a non-null MSB, so it is safe to use the MSB to + * differentiate between units and terminals as long as the descriptor parsing + * code makes sure terminal types have a non-null MSB. + * + * For terminals, the type's most significant bit stores the terminal + * direction (either UVC_TERM_INPUT or UVC_TERM_OUTPUT). The type field should + * always be accessed with the UVC_ENTITY_* macros and never directly. + */ + +struct uvc_entity { + struct list_head list; /* Entity as part of a UVC device. */ + struct list_head chain; /* Entity as part of a video device + * chain. */ + __u8 id; + __u16 type; + char name[64]; + + union { + struct { + __u16 wObjectiveFocalLengthMin; + __u16 wObjectiveFocalLengthMax; + __u16 wOcularFocalLength; + __u8 bControlSize; + __u8 *bmControls; + } camera; + + struct { + __u8 bControlSize; + __u8 *bmControls; + __u8 bTransportModeSize; + __u8 *bmTransportModes; + } media; + + struct { + __u8 bSourceID; + } output; + + struct { + __u8 bSourceID; + __u16 wMaxMultiplier; + __u8 bControlSize; + __u8 *bmControls; + __u8 bmVideoStandards; + } processing; + + struct { + __u8 bNrInPins; + __u8 *baSourceID; + } selector; + + struct { + __u8 guidExtensionCode[16]; + __u8 bNumControls; + __u8 bNrInPins; + __u8 *baSourceID; + __u8 bControlSize; + __u8 *bmControls; + __u8 *bmControlsType; + } extension; + }; + + unsigned int ncontrols; + struct uvc_control *controls; +}; + +struct uvc_frame { + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u8 bFrameIntervalType; + __u32 dwDefaultFrameInterval; + __u32 *dwFrameInterval; +}; + +struct uvc_format { + __u8 type; + __u8 index; + __u8 bpp; + __u8 colorspace; + __u32 fcc; + __u32 flags; + + char name[32]; + + unsigned int nframes; + struct uvc_frame *frame; +}; + +struct uvc_streaming_header { + __u8 bNumFormats; + __u8 bEndpointAddress; + __u8 bTerminalLink; + __u8 bControlSize; + __u8 *bmaControls; + /* The following fields are used by input headers only. */ + __u8 bmInfo; + __u8 bStillCaptureMethod; + __u8 bTriggerSupport; + __u8 bTriggerUsage; +}; + +struct uvc_streaming { + struct list_head list; + + struct usb_interface *intf; + int intfnum; + __u16 maxpsize; + + struct uvc_streaming_header header; + + unsigned int nformats; + struct uvc_format *format; + + struct uvc_streaming_control ctrl; + struct uvc_format *cur_format; + struct uvc_frame *cur_frame; + + struct mutex mutex; +}; + +enum uvc_buffer_state { + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, +}; + +struct uvc_buffer { + unsigned long vma_use_count; + struct list_head stream; + + /* Touched by interrupt handler. */ + struct v4l2_buffer buf; + struct list_head queue; + wait_queue_head_t wait; + enum uvc_buffer_state state; +}; + +#define UVC_QUEUE_STREAMING (1 << 0) +#define UVC_QUEUE_DISCONNECTED (1 << 1) +#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2) + +struct uvc_video_queue { + void *mem; + unsigned int flags; + __u32 sequence; + + unsigned int count; + unsigned int buf_size; + struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS]; + struct mutex mutex; /* protects buffers and mainqueue */ + spinlock_t irqlock; /* protects irqqueue */ + + struct list_head mainqueue; + struct list_head irqqueue; +}; + +struct uvc_video_device { + struct uvc_device *dev; + struct video_device *vdev; + atomic_t active; + unsigned int frozen : 1; + + struct list_head iterms; + struct uvc_entity *oterm; + struct uvc_entity *processing; + struct uvc_entity *selector; + struct list_head extensions; + struct mutex ctrl_mutex; + + struct uvc_video_queue queue; + + /* Video streaming object, must always be non-NULL. */ + struct uvc_streaming *streaming; + + void (*decode) (struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + + /* Context data used by the bulk completion handler. */ + struct { + __u8 header[256]; + unsigned int header_size; + int skip_payload; + __u32 payload_size; + __u32 max_payload_size; + } bulk; + + struct urb *urb[UVC_URBS]; + char *urb_buffer[UVC_URBS]; + + __u8 last_fid; +}; + +enum uvc_device_state { + UVC_DEV_DISCONNECTED = 1, +}; + +struct uvc_device { + struct usb_device *udev; + struct usb_interface *intf; + __u32 quirks; + int intfnum; + char name[32]; + + enum uvc_device_state state; + struct kref kref; + struct list_head list; + + /* Video control interface */ + __u16 uvc_version; + __u32 clock_frequency; + + struct list_head entities; + + struct uvc_video_device video; + + /* Status Interrupt Endpoint */ + struct usb_host_endpoint *int_ep; + struct urb *int_urb; + __u8 status[16]; + struct input_dev *input; + + /* Video Streaming interfaces */ + struct list_head streaming; +}; + +enum uvc_handle_state { + UVC_HANDLE_PASSIVE = 0, + UVC_HANDLE_ACTIVE = 1, +}; + +struct uvc_fh { + struct uvc_video_device *device; + enum uvc_handle_state state; +}; + +struct uvc_driver { + struct usb_driver driver; + + struct mutex open_mutex; /* protects from open/disconnect race */ + + struct list_head devices; /* struct uvc_device list */ + struct list_head controls; /* struct uvc_control_info list */ + struct mutex ctrl_mutex; /* protects controls and devices + lists */ +}; + +/* ------------------------------------------------------------------------ + * Debugging, printing and logging + */ + +#define UVC_TRACE_PROBE (1 << 0) +#define UVC_TRACE_DESCR (1 << 1) +#define UVC_TRACE_CONTROL (1 << 2) +#define UVC_TRACE_FORMAT (1 << 3) +#define UVC_TRACE_CAPTURE (1 << 4) +#define UVC_TRACE_CALLS (1 << 5) +#define UVC_TRACE_IOCTL (1 << 6) +#define UVC_TRACE_FRAME (1 << 7) +#define UVC_TRACE_SUSPEND (1 << 8) +#define UVC_TRACE_STATUS (1 << 9) + +extern unsigned int uvc_trace_param; + +#define uvc_trace(flag, msg...) \ + do { \ + if (uvc_trace_param & flag) \ + printk(KERN_DEBUG "uvcvideo: " msg); \ + } while (0) + +#define uvc_printk(level, msg...) \ + printk(level "uvcvideo: " msg) + +#define UVC_GUID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \ + "%02x%02x%02x%02x%02x%02x" +#define UVC_GUID_ARGS(guid) \ + (guid)[3], (guid)[2], (guid)[1], (guid)[0], \ + (guid)[5], (guid)[4], \ + (guid)[7], (guid)[6], \ + (guid)[8], (guid)[9], \ + (guid)[10], (guid)[11], (guid)[12], \ + (guid)[13], (guid)[14], (guid)[15] + +/* -------------------------------------------------------------------------- + * Internal functions. + */ + +/* Core driver */ +extern struct uvc_driver uvc_driver; +extern void uvc_delete(struct kref *kref); + +/* Video buffers queue management. */ +extern void uvc_queue_init(struct uvc_video_queue *queue); +extern int uvc_alloc_buffers(struct uvc_video_queue *queue, + unsigned int nbuffers, unsigned int buflength); +extern int uvc_free_buffers(struct uvc_video_queue *queue); +extern int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking); +extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable); +extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect); +extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf); +extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue, + struct file *file, poll_table *wait); +static inline int uvc_queue_streaming(struct uvc_video_queue *queue) +{ + return queue->flags & UVC_QUEUE_STREAMING; +} + +/* V4L2 interface */ +extern struct file_operations uvc_fops; + +/* Video */ +extern int uvc_video_init(struct uvc_video_device *video); +extern int uvc_video_suspend(struct uvc_video_device *video); +extern int uvc_video_resume(struct uvc_video_device *video); +extern int uvc_video_enable(struct uvc_video_device *video, int enable); +extern int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe); +extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size); +extern int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe); + +/* Status */ +extern int uvc_status_init(struct uvc_device *dev); +extern void uvc_status_cleanup(struct uvc_device *dev); +extern int uvc_status_suspend(struct uvc_device *dev); +extern int uvc_status_resume(struct uvc_device *dev); + +/* Controls */ +extern struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping); +extern int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl); + +extern int uvc_ctrl_add_info(struct uvc_control_info *info); +extern int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping); +extern int uvc_ctrl_init_device(struct uvc_device *dev); +extern void uvc_ctrl_cleanup_device(struct uvc_device *dev); +extern int uvc_ctrl_resume_device(struct uvc_device *dev); +extern void uvc_ctrl_init(void); + +extern int uvc_ctrl_begin(struct uvc_video_device *video); +extern int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback); +static inline int uvc_ctrl_commit(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 0); +} +static inline int uvc_ctrl_rollback(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 1); +} + +extern int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); +extern int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); + +extern int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *ctrl, int set); + +/* Utility functions */ +extern void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold); +extern uint32_t uvc_fraction_to_interval(uint32_t numerator, + uint32_t denominator); +extern struct usb_host_endpoint *uvc_find_endpoint( + struct usb_host_interface *alts, __u8 epaddr); + +/* Quirks support */ +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + +#endif /* __KERNEL__ */ + +#endif diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index 50e1ff9f2be..a0f6c60279e 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -39,15 +39,18 @@ #include <linux/kmod.h> #endif -static unsigned int debug = 0; +static unsigned int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug,"enable debug messages"); +MODULE_PARM_DESC(debug, "enable debug messages"); MODULE_AUTHOR("Bill Dirks"); MODULE_DESCRIPTION("v4l(1) compatibility layer for v4l2 drivers."); MODULE_LICENSE("GPL"); -#define dprintk(fmt, arg...) if (debug) \ - printk(KERN_DEBUG "v4l1-compat: " fmt , ## arg) +#define dprintk(fmt, arg...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "v4l1-compat: " fmt , ## arg);\ + } while (0) /* * I O C T L T R A N S L A T I O N @@ -69,14 +72,12 @@ get_v4l_control(struct inode *inode, qctrl2.id = cid; err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2); if (err < 0) - dprintk("VIDIOC_QUERYCTRL: %d\n",err); - if (err == 0 && - !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) - { + dprintk("VIDIOC_QUERYCTRL: %d\n", err); + if (err == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) { ctrl2.id = qctrl2.id; err = drv(inode, file, VIDIOC_G_CTRL, &ctrl2); if (err < 0) { - dprintk("VIDIOC_G_CTRL: %d\n",err); + dprintk("VIDIOC_G_CTRL: %d\n", err); return 0; } return ((ctrl2.value - qctrl2.minimum) * 65535 @@ -100,11 +101,10 @@ set_v4l_control(struct inode *inode, qctrl2.id = cid; err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2); if (err < 0) - dprintk("VIDIOC_QUERYCTRL: %d\n",err); + dprintk("VIDIOC_QUERYCTRL: %d\n", err); if (err == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED) && - !(qctrl2.flags & V4L2_CTRL_FLAG_GRABBED)) - { + !(qctrl2.flags & V4L2_CTRL_FLAG_GRABBED)) { if (value < 0) value = 0; if (value > 65535) @@ -119,14 +119,14 @@ set_v4l_control(struct inode *inode, ctrl2.value += qctrl2.minimum; err = drv(inode, file, VIDIOC_S_CTRL, &ctrl2); if (err < 0) - dprintk("VIDIOC_S_CTRL: %d\n",err); + dprintk("VIDIOC_S_CTRL: %d\n", err); } return 0; } /* ----------------------------------------------------------------- */ -const static unsigned int palette2pixelformat[] = { +static const unsigned int palette2pixelformat[] = { [VIDEO_PALETTE_GREY] = V4L2_PIX_FMT_GREY, [VIDEO_PALETTE_RGB555] = V4L2_PIX_FMT_RGB555, [VIDEO_PALETTE_RGB565] = V4L2_PIX_FMT_RGB565, @@ -157,8 +157,7 @@ static unsigned int __attribute_const__ pixelformat_to_palette(unsigned int pixelformat) { int palette = 0; - switch (pixelformat) - { + switch (pixelformat) { case V4L2_PIX_FMT_GREY: palette = VIDEO_PALETTE_GREY; break; @@ -200,14 +199,13 @@ pixelformat_to_palette(unsigned int pixelformat) /* ----------------------------------------------------------------- */ -static int poll_one(struct file *file) +static int poll_one(struct file *file, struct poll_wqueues *pwq) { int retval = 1; poll_table *table; - struct poll_wqueues pwq; - poll_initwait(&pwq); - table = &pwq.pt; + poll_initwait(pwq); + table = &pwq->pt; for (;;) { int mask; set_current_state(TASK_INTERRUPTIBLE); @@ -222,878 +220,1073 @@ static int poll_one(struct file *file) schedule(); } set_current_state(TASK_RUNNING); - poll_freewait(&pwq); + poll_freewait(pwq); return retval; } -static int count_inputs(struct inode *inode, - struct file *file, - v4l2_kioctl drv) +static int count_inputs( + struct inode *inode, + struct file *file, + v4l2_kioctl drv) { struct v4l2_input input2; int i; for (i = 0;; i++) { - memset(&input2,0,sizeof(input2)); + memset(&input2, 0, sizeof(input2)); input2.index = i; - if (0 != drv(inode,file,VIDIOC_ENUMINPUT, &input2)) + if (0 != drv(inode, file, VIDIOC_ENUMINPUT, &input2)) break; } return i; } -static int check_size(struct inode *inode, - struct file *file, - v4l2_kioctl drv, - int *maxw, int *maxh) +static int check_size( + struct inode *inode, + struct file *file, + v4l2_kioctl drv, + int *maxw, + int *maxh) { struct v4l2_fmtdesc desc2; struct v4l2_format fmt2; - memset(&desc2,0,sizeof(desc2)); - memset(&fmt2,0,sizeof(fmt2)); + memset(&desc2, 0, sizeof(desc2)); + memset(&fmt2, 0, sizeof(fmt2)); desc2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - if (0 != drv(inode,file,VIDIOC_ENUM_FMT, &desc2)) + if (0 != drv(inode, file, VIDIOC_ENUM_FMT, &desc2)) goto done; fmt2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; fmt2.fmt.pix.width = 10000; fmt2.fmt.pix.height = 10000; fmt2.fmt.pix.pixelformat = desc2.pixelformat; - if (0 != drv(inode,file,VIDIOC_TRY_FMT, &fmt2)) + if (0 != drv(inode, file, VIDIOC_TRY_FMT, &fmt2)) goto done; *maxw = fmt2.fmt.pix.width; *maxh = fmt2.fmt.pix.height; - done: +done: return 0; } /* ----------------------------------------------------------------- */ -/* - * This function is exported. - */ -int -v4l_compat_translate_ioctl(struct inode *inode, - struct file *file, - int cmd, - void *arg, - v4l2_kioctl drv) +static noinline int v4l1_compat_get_capabilities( + struct video_capability *cap, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) { - struct v4l2_capability *cap2 = NULL; - struct v4l2_format *fmt2 = NULL; - enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE; - - struct v4l2_framebuffer fbuf2; - struct v4l2_input input2; - struct v4l2_tuner tun2; - struct v4l2_standard std2; - struct v4l2_frequency freq2; - struct v4l2_audio aud2; - struct v4l2_queryctrl qctrl2; - struct v4l2_buffer buf2; - v4l2_std_id sid; - int i, err = 0; - - switch (cmd) { - case VIDIOCGCAP: /* capability */ - { - struct video_capability *cap = arg; - - cap2 = kzalloc(sizeof(*cap2), GFP_KERNEL); - if (!cap2) { - err = -ENOMEM; - break; - } - memset(cap, 0, sizeof(*cap)); - memset(&fbuf2, 0, sizeof(fbuf2)); + int err; + struct v4l2_framebuffer fbuf; + struct v4l2_capability *cap2; + + cap2 = kzalloc(sizeof(*cap2), GFP_KERNEL); + if (!cap2) { + err = -ENOMEM; + return err; + } + memset(cap, 0, sizeof(*cap)); + memset(&fbuf, 0, sizeof(fbuf)); - err = drv(inode, file, VIDIOC_QUERYCAP, cap2); + err = drv(inode, file, VIDIOC_QUERYCAP, cap2); + if (err < 0) { + dprintk("VIDIOCGCAP / VIDIOC_QUERYCAP: %d\n", err); + goto done; + } + if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) { + err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); if (err < 0) { - dprintk("VIDIOCGCAP / VIDIOC_QUERYCAP: %d\n",err); - break; + dprintk("VIDIOCGCAP / VIDIOC_G_FBUF: %d\n", err); + memset(&fbuf, 0, sizeof(fbuf)); } - if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) { - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf2); - if (err < 0) { - dprintk("VIDIOCGCAP / VIDIOC_G_FBUF: %d\n",err); - memset(&fbuf2, 0, sizeof(fbuf2)); - } - err = 0; - } - - memcpy(cap->name, cap2->card, - min(sizeof(cap->name), sizeof(cap2->card))); - cap->name[sizeof(cap->name) - 1] = 0; - if (cap2->capabilities & V4L2_CAP_VIDEO_CAPTURE) - cap->type |= VID_TYPE_CAPTURE; - if (cap2->capabilities & V4L2_CAP_TUNER) - cap->type |= VID_TYPE_TUNER; - if (cap2->capabilities & V4L2_CAP_VBI_CAPTURE) - cap->type |= VID_TYPE_TELETEXT; - if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) - cap->type |= VID_TYPE_OVERLAY; - if (fbuf2.capability & V4L2_FBUF_CAP_LIST_CLIPPING) - cap->type |= VID_TYPE_CLIPPING; - - cap->channels = count_inputs(inode,file,drv); - check_size(inode,file,drv, - &cap->maxwidth,&cap->maxheight); - cap->audios = 0; /* FIXME */ - cap->minwidth = 48; /* FIXME */ - cap->minheight = 32; /* FIXME */ - break; + err = 0; } - case VIDIOCGFBUF: /* get frame buffer */ - { - struct video_buffer *buffer = arg; - memset(buffer, 0, sizeof(*buffer)); - memset(&fbuf2, 0, sizeof(fbuf2)); + memcpy(cap->name, cap2->card, + min(sizeof(cap->name), sizeof(cap2->card))); + cap->name[sizeof(cap->name) - 1] = 0; + if (cap2->capabilities & V4L2_CAP_VIDEO_CAPTURE) + cap->type |= VID_TYPE_CAPTURE; + if (cap2->capabilities & V4L2_CAP_TUNER) + cap->type |= VID_TYPE_TUNER; + if (cap2->capabilities & V4L2_CAP_VBI_CAPTURE) + cap->type |= VID_TYPE_TELETEXT; + if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) + cap->type |= VID_TYPE_OVERLAY; + if (fbuf.capability & V4L2_FBUF_CAP_LIST_CLIPPING) + cap->type |= VID_TYPE_CLIPPING; + + cap->channels = count_inputs(inode, file, drv); + check_size(inode, file, drv, + &cap->maxwidth, &cap->maxheight); + cap->audios = 0; /* FIXME */ + cap->minwidth = 48; /* FIXME */ + cap->minheight = 32; /* FIXME */ + +done: + kfree(cap2); + return err; +} - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf2); - if (err < 0) { - dprintk("VIDIOCGFBUF / VIDIOC_G_FBUF: %d\n",err); - break; - } - buffer->base = fbuf2.base; - buffer->height = fbuf2.fmt.height; - buffer->width = fbuf2.fmt.width; +static noinline int v4l1_compat_get_frame_buffer( + struct video_buffer *buffer, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_framebuffer fbuf; - switch (fbuf2.fmt.pixelformat) { - case V4L2_PIX_FMT_RGB332: - buffer->depth = 8; - break; - case V4L2_PIX_FMT_RGB555: - buffer->depth = 15; - break; - case V4L2_PIX_FMT_RGB565: - buffer->depth = 16; - break; - case V4L2_PIX_FMT_BGR24: - buffer->depth = 24; - break; - case V4L2_PIX_FMT_BGR32: - buffer->depth = 32; - break; - default: - buffer->depth = 0; - } - if (fbuf2.fmt.bytesperline) { - buffer->bytesperline = fbuf2.fmt.bytesperline; - if (!buffer->depth && buffer->width) - buffer->depth = ((fbuf2.fmt.bytesperline<<3) - + (buffer->width-1) ) - /buffer->width; - } else { - buffer->bytesperline = - (buffer->width * buffer->depth + 7) & 7; - buffer->bytesperline >>= 3; - } + memset(buffer, 0, sizeof(*buffer)); + memset(&fbuf, 0, sizeof(fbuf)); + + err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + if (err < 0) { + dprintk("VIDIOCGFBUF / VIDIOC_G_FBUF: %d\n", err); + goto done; + } + buffer->base = fbuf.base; + buffer->height = fbuf.fmt.height; + buffer->width = fbuf.fmt.width; + + switch (fbuf.fmt.pixelformat) { + case V4L2_PIX_FMT_RGB332: + buffer->depth = 8; + break; + case V4L2_PIX_FMT_RGB555: + buffer->depth = 15; + break; + case V4L2_PIX_FMT_RGB565: + buffer->depth = 16; + break; + case V4L2_PIX_FMT_BGR24: + buffer->depth = 24; + break; + case V4L2_PIX_FMT_BGR32: + buffer->depth = 32; break; + default: + buffer->depth = 0; } - case VIDIOCSFBUF: /* set frame buffer */ - { - struct video_buffer *buffer = arg; - - memset(&fbuf2, 0, sizeof(fbuf2)); - fbuf2.base = buffer->base; - fbuf2.fmt.height = buffer->height; - fbuf2.fmt.width = buffer->width; - switch (buffer->depth) { - case 8: - fbuf2.fmt.pixelformat = V4L2_PIX_FMT_RGB332; - break; - case 15: - fbuf2.fmt.pixelformat = V4L2_PIX_FMT_RGB555; - break; - case 16: - fbuf2.fmt.pixelformat = V4L2_PIX_FMT_RGB565; - break; - case 24: - fbuf2.fmt.pixelformat = V4L2_PIX_FMT_BGR24; - break; - case 32: - fbuf2.fmt.pixelformat = V4L2_PIX_FMT_BGR32; - break; - } - fbuf2.fmt.bytesperline = buffer->bytesperline; - err = drv(inode, file, VIDIOC_S_FBUF, &fbuf2); - if (err < 0) - dprintk("VIDIOCSFBUF / VIDIOC_S_FBUF: %d\n",err); + if (fbuf.fmt.bytesperline) { + buffer->bytesperline = fbuf.fmt.bytesperline; + if (!buffer->depth && buffer->width) + buffer->depth = ((fbuf.fmt.bytesperline<<3) + + (buffer->width-1)) + / buffer->width; + } else { + buffer->bytesperline = + (buffer->width * buffer->depth + 7) & 7; + buffer->bytesperline >>= 3; + } +done: + return err; +} + +static noinline int v4l1_compat_set_frame_buffer( + struct video_buffer *buffer, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_framebuffer fbuf; + + memset(&fbuf, 0, sizeof(fbuf)); + fbuf.base = buffer->base; + fbuf.fmt.height = buffer->height; + fbuf.fmt.width = buffer->width; + switch (buffer->depth) { + case 8: + fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB332; + break; + case 15: + fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB555; + break; + case 16: + fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB565; + break; + case 24: + fbuf.fmt.pixelformat = V4L2_PIX_FMT_BGR24; + break; + case 32: + fbuf.fmt.pixelformat = V4L2_PIX_FMT_BGR32; break; } - case VIDIOCGWIN: /* get window or capture dimensions */ - { - struct video_window *win = arg; + fbuf.fmt.bytesperline = buffer->bytesperline; + err = drv(inode, file, VIDIOC_S_FBUF, &fbuf); + if (err < 0) + dprintk("VIDIOCSFBUF / VIDIOC_S_FBUF: %d\n", err); + return err; +} - fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); - if (!fmt2) { - err = -ENOMEM; - break; - } - memset(win,0,sizeof(*win)); +static noinline int v4l1_compat_get_win_cap_dimensions( + struct video_window *win, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_format *fmt; - fmt2->type = V4L2_BUF_TYPE_VIDEO_OVERLAY; - err = drv(inode, file, VIDIOC_G_FMT, fmt2); - if (err < 0) - dprintk("VIDIOCGWIN / VIDIOC_G_WIN: %d\n",err); - if (err == 0) { - win->x = fmt2->fmt.win.w.left; - win->y = fmt2->fmt.win.w.top; - win->width = fmt2->fmt.win.w.width; - win->height = fmt2->fmt.win.w.height; - win->chromakey = fmt2->fmt.win.chromakey; - win->clips = NULL; - win->clipcount = 0; - break; - } + fmt = kzalloc(sizeof(*fmt), GFP_KERNEL); + if (!fmt) { + err = -ENOMEM; + return err; + } + memset(win, 0, sizeof(*win)); - fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt2); - if (err < 0) { - dprintk("VIDIOCGWIN / VIDIOC_G_FMT: %d\n",err); - break; - } - win->x = 0; - win->y = 0; - win->width = fmt2->fmt.pix.width; - win->height = fmt2->fmt.pix.height; - win->chromakey = 0; + fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY; + err = drv(inode, file, VIDIOC_G_FMT, fmt); + if (err < 0) + dprintk("VIDIOCGWIN / VIDIOC_G_WIN: %d\n", err); + if (err == 0) { + win->x = fmt->fmt.win.w.left; + win->y = fmt->fmt.win.w.top; + win->width = fmt->fmt.win.w.width; + win->height = fmt->fmt.win.w.height; + win->chromakey = fmt->fmt.win.chromakey; win->clips = NULL; win->clipcount = 0; - break; + goto done; } - case VIDIOCSWIN: /* set window and/or capture dimensions */ - { - struct video_window *win = arg; - int err1,err2; - fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); - if (!fmt2) { - err = -ENOMEM; - break; - } - fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - drv(inode, file, VIDIOC_STREAMOFF, &fmt2->type); - err1 = drv(inode, file, VIDIOC_G_FMT, fmt2); - if (err1 < 0) - dprintk("VIDIOCSWIN / VIDIOC_G_FMT: %d\n",err); - if (err1 == 0) { - fmt2->fmt.pix.width = win->width; - fmt2->fmt.pix.height = win->height; - fmt2->fmt.pix.field = V4L2_FIELD_ANY; - fmt2->fmt.pix.bytesperline = 0; - err = drv(inode, file, VIDIOC_S_FMT, fmt2); - if (err < 0) - dprintk("VIDIOCSWIN / VIDIOC_S_FMT #1: %d\n", - err); - win->width = fmt2->fmt.pix.width; - win->height = fmt2->fmt.pix.height; - } + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + err = drv(inode, file, VIDIOC_G_FMT, fmt); + if (err < 0) { + dprintk("VIDIOCGWIN / VIDIOC_G_FMT: %d\n", err); + goto done; + } + win->x = 0; + win->y = 0; + win->width = fmt->fmt.pix.width; + win->height = fmt->fmt.pix.height; + win->chromakey = 0; + win->clips = NULL; + win->clipcount = 0; +done: + kfree(fmt); + return err; +} - memset(fmt2,0,sizeof(*fmt2)); - fmt2->type = V4L2_BUF_TYPE_VIDEO_OVERLAY; - fmt2->fmt.win.w.left = win->x; - fmt2->fmt.win.w.top = win->y; - fmt2->fmt.win.w.width = win->width; - fmt2->fmt.win.w.height = win->height; - fmt2->fmt.win.chromakey = win->chromakey; - fmt2->fmt.win.clips = (void __user *)win->clips; - fmt2->fmt.win.clipcount = win->clipcount; - err2 = drv(inode, file, VIDIOC_S_FMT, fmt2); - if (err2 < 0) - dprintk("VIDIOCSWIN / VIDIOC_S_FMT #2: %d\n",err); - - if (err1 != 0 && err2 != 0) - err = err1; - break; +static noinline int v4l1_compat_set_win_cap_dimensions( + struct video_window *win, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err, err1, err2; + struct v4l2_format *fmt; + + fmt = kzalloc(sizeof(*fmt), GFP_KERNEL); + if (!fmt) { + err = -ENOMEM; + return err; } - case VIDIOCCAPTURE: /* turn on/off preview */ - { - int *on = arg; - - if (0 == *on) { - /* dirty hack time. But v4l1 has no STREAMOFF - * equivalent in the API, and this one at - * least comes close ... */ - drv(inode, file, VIDIOC_STREAMOFF, &captype); - } - err = drv(inode, file, VIDIOC_OVERLAY, arg); + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + drv(inode, file, VIDIOC_STREAMOFF, &fmt->type); + err1 = drv(inode, file, VIDIOC_G_FMT, fmt); + if (err1 < 0) + dprintk("VIDIOCSWIN / VIDIOC_G_FMT: %d\n", err1); + if (err1 == 0) { + fmt->fmt.pix.width = win->width; + fmt->fmt.pix.height = win->height; + fmt->fmt.pix.field = V4L2_FIELD_ANY; + fmt->fmt.pix.bytesperline = 0; + err = drv(inode, file, VIDIOC_S_FMT, fmt); if (err < 0) - dprintk("VIDIOCCAPTURE / VIDIOC_PREVIEW: %d\n",err); - break; + dprintk("VIDIOCSWIN / VIDIOC_S_FMT #1: %d\n", + err); + win->width = fmt->fmt.pix.width; + win->height = fmt->fmt.pix.height; } - case VIDIOCGCHAN: /* get input information */ - { - struct video_channel *chan = arg; - memset(&input2,0,sizeof(input2)); - input2.index = chan->channel; - err = drv(inode, file, VIDIOC_ENUMINPUT, &input2); - if (err < 0) { - dprintk("VIDIOCGCHAN / VIDIOC_ENUMINPUT: " - "channel=%d err=%d\n",chan->channel,err); - break; - } - chan->channel = input2.index; - memcpy(chan->name, input2.name, - min(sizeof(chan->name), sizeof(input2.name))); - chan->name[sizeof(chan->name) - 1] = 0; - chan->tuners = (input2.type == V4L2_INPUT_TYPE_TUNER) ? 1 : 0; - chan->flags = (chan->tuners) ? VIDEO_VC_TUNER : 0; - switch (input2.type) { - case V4L2_INPUT_TYPE_TUNER: - chan->type = VIDEO_TYPE_TV; - break; - default: - case V4L2_INPUT_TYPE_CAMERA: - chan->type = VIDEO_TYPE_CAMERA; - break; - } - chan->norm = 0; - err = drv(inode, file, VIDIOC_G_STD, &sid); - if (err < 0) - dprintk("VIDIOCGCHAN / VIDIOC_G_STD: %d\n",err); - if (err == 0) { - if (sid & V4L2_STD_PAL) - chan->norm = VIDEO_MODE_PAL; - if (sid & V4L2_STD_NTSC) - chan->norm = VIDEO_MODE_NTSC; - if (sid & V4L2_STD_SECAM) - chan->norm = VIDEO_MODE_SECAM; - } - break; - } - case VIDIOCSCHAN: /* set input */ - { - struct video_channel *chan = arg; + memset(fmt, 0, sizeof(*fmt)); + fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY; + fmt->fmt.win.w.left = win->x; + fmt->fmt.win.w.top = win->y; + fmt->fmt.win.w.width = win->width; + fmt->fmt.win.w.height = win->height; + fmt->fmt.win.chromakey = win->chromakey; + fmt->fmt.win.clips = (void __user *)win->clips; + fmt->fmt.win.clipcount = win->clipcount; + err2 = drv(inode, file, VIDIOC_S_FMT, fmt); + if (err2 < 0) + dprintk("VIDIOCSWIN / VIDIOC_S_FMT #2: %d\n", err2); + + if (err1 != 0 && err2 != 0) + err = err1; + else + err = 0; + kfree(fmt); + return err; +} - sid = 0; - err = drv(inode, file, VIDIOC_S_INPUT, &chan->channel); - if (err < 0) - dprintk("VIDIOCSCHAN / VIDIOC_S_INPUT: %d\n",err); - switch (chan->norm) { - case VIDEO_MODE_PAL: - sid = V4L2_STD_PAL; - break; - case VIDEO_MODE_NTSC: - sid = V4L2_STD_NTSC; - break; - case VIDEO_MODE_SECAM: - sid = V4L2_STD_SECAM; - break; - } - if (0 != sid) { - err = drv(inode, file, VIDIOC_S_STD, &sid); - if (err < 0) - dprintk("VIDIOCSCHAN / VIDIOC_S_STD: %d\n",err); - } - break; +static noinline int v4l1_compat_turn_preview_on_off( + int *on, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + if (0 == *on) { + /* dirty hack time. But v4l1 has no STREAMOFF + * equivalent in the API, and this one at + * least comes close ... */ + drv(inode, file, VIDIOC_STREAMOFF, &captype); } - case VIDIOCGPICT: /* get tone controls & partial capture format */ - { - struct video_picture *pict = arg; - - fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); - if (!fmt2) { - err = -ENOMEM; - break; - } + err = drv(inode, file, VIDIOC_OVERLAY, on); + if (err < 0) + dprintk("VIDIOCCAPTURE / VIDIOC_PREVIEW: %d\n", err); + return err; +} - pict->brightness = get_v4l_control(inode, file, - V4L2_CID_BRIGHTNESS,drv); - pict->hue = get_v4l_control(inode, file, - V4L2_CID_HUE, drv); - pict->contrast = get_v4l_control(inode, file, - V4L2_CID_CONTRAST, drv); - pict->colour = get_v4l_control(inode, file, - V4L2_CID_SATURATION, drv); - pict->whiteness = get_v4l_control(inode, file, - V4L2_CID_WHITENESS, drv); - - fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt2); - if (err < 0) { - dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err); - break; - } +static noinline int v4l1_compat_get_input_info( + struct video_channel *chan, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_input input2; + v4l2_std_id sid; - pict->depth = ((fmt2->fmt.pix.bytesperline<<3) - + (fmt2->fmt.pix.width-1) ) - /fmt2->fmt.pix.width; - pict->palette = pixelformat_to_palette( - fmt2->fmt.pix.pixelformat); + memset(&input2, 0, sizeof(input2)); + input2.index = chan->channel; + err = drv(inode, file, VIDIOC_ENUMINPUT, &input2); + if (err < 0) { + dprintk("VIDIOCGCHAN / VIDIOC_ENUMINPUT: " + "channel=%d err=%d\n", chan->channel, err); + goto done; + } + chan->channel = input2.index; + memcpy(chan->name, input2.name, + min(sizeof(chan->name), sizeof(input2.name))); + chan->name[sizeof(chan->name) - 1] = 0; + chan->tuners = (input2.type == V4L2_INPUT_TYPE_TUNER) ? 1 : 0; + chan->flags = (chan->tuners) ? VIDEO_VC_TUNER : 0; + switch (input2.type) { + case V4L2_INPUT_TYPE_TUNER: + chan->type = VIDEO_TYPE_TV; + break; + default: + case V4L2_INPUT_TYPE_CAMERA: + chan->type = VIDEO_TYPE_CAMERA; break; } - case VIDIOCSPICT: /* set tone controls & partial capture format */ - { - struct video_picture *pict = arg; - int mem_err = 0, ovl_err = 0; + chan->norm = 0; + err = drv(inode, file, VIDIOC_G_STD, &sid); + if (err < 0) + dprintk("VIDIOCGCHAN / VIDIOC_G_STD: %d\n", err); + if (err == 0) { + if (sid & V4L2_STD_PAL) + chan->norm = VIDEO_MODE_PAL; + if (sid & V4L2_STD_NTSC) + chan->norm = VIDEO_MODE_NTSC; + if (sid & V4L2_STD_SECAM) + chan->norm = VIDEO_MODE_SECAM; + } +done: + return err; +} - fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); - if (!fmt2) { - err = -ENOMEM; - break; - } - memset(&fbuf2, 0, sizeof(fbuf2)); - - set_v4l_control(inode, file, - V4L2_CID_BRIGHTNESS, pict->brightness, drv); - set_v4l_control(inode, file, - V4L2_CID_HUE, pict->hue, drv); - set_v4l_control(inode, file, - V4L2_CID_CONTRAST, pict->contrast, drv); - set_v4l_control(inode, file, - V4L2_CID_SATURATION, pict->colour, drv); - set_v4l_control(inode, file, - V4L2_CID_WHITENESS, pict->whiteness, drv); - /* - * V4L1 uses this ioctl to set both memory capture and overlay - * pixel format, while V4L2 has two different ioctls for this. - * Some cards may not support one or the other, and may support - * different pixel formats for memory vs overlay. - */ - - fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt2); - /* If VIDIOC_G_FMT failed, then the driver likely doesn't - support memory capture. Trying to set the memory capture - parameters would be pointless. */ - if (err < 0) { - dprintk("VIDIOCSPICT / VIDIOC_G_FMT: %d\n",err); - mem_err = -1000; /* didn't even try */ - } else if (fmt2->fmt.pix.pixelformat != - palette_to_pixelformat(pict->palette)) { - fmt2->fmt.pix.pixelformat = palette_to_pixelformat( - pict->palette); - mem_err = drv(inode, file, VIDIOC_S_FMT, fmt2); - if (mem_err < 0) - dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n", - mem_err); - } +static noinline int v4l1_compat_set_input( + struct video_channel *chan, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + v4l2_std_id sid = 0; - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf2); - /* If VIDIOC_G_FBUF failed, then the driver likely doesn't - support overlay. Trying to set the overlay parameters - would be quite pointless. */ - if (err < 0) { - dprintk("VIDIOCSPICT / VIDIOC_G_FBUF: %d\n",err); - ovl_err = -1000; /* didn't even try */ - } else if (fbuf2.fmt.pixelformat != - palette_to_pixelformat(pict->palette)) { - fbuf2.fmt.pixelformat = palette_to_pixelformat( - pict->palette); - ovl_err = drv(inode, file, VIDIOC_S_FBUF, &fbuf2); - if (ovl_err < 0) - dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n", - ovl_err); - } - if (ovl_err < 0 && mem_err < 0) - /* ioctl failed, couldn't set either parameter */ - if (mem_err != -1000) { - err = mem_err; - } else if (ovl_err == -EPERM) { - err = 0; - } else { - err = ovl_err; - } - else - err = 0; + err = drv(inode, file, VIDIOC_S_INPUT, &chan->channel); + if (err < 0) + dprintk("VIDIOCSCHAN / VIDIOC_S_INPUT: %d\n", err); + switch (chan->norm) { + case VIDEO_MODE_PAL: + sid = V4L2_STD_PAL; + break; + case VIDEO_MODE_NTSC: + sid = V4L2_STD_NTSC; + break; + case VIDEO_MODE_SECAM: + sid = V4L2_STD_SECAM; break; } - case VIDIOCGTUNER: /* get tuner information */ - { - struct video_tuner *tun = arg; - - memset(&tun2,0,sizeof(tun2)); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); - if (err < 0) { - dprintk("VIDIOCGTUNER / VIDIOC_G_TUNER: %d\n",err); - break; - } - memcpy(tun->name, tun2.name, - min(sizeof(tun->name), sizeof(tun2.name))); - tun->name[sizeof(tun->name) - 1] = 0; - tun->rangelow = tun2.rangelow; - tun->rangehigh = tun2.rangehigh; - tun->flags = 0; - tun->mode = VIDEO_MODE_AUTO; - - for (i = 0; i < 64; i++) { - memset(&std2,0,sizeof(std2)); - std2.index = i; - if (0 != drv(inode, file, VIDIOC_ENUMSTD, &std2)) - break; - if (std2.id & V4L2_STD_PAL) - tun->flags |= VIDEO_TUNER_PAL; - if (std2.id & V4L2_STD_NTSC) - tun->flags |= VIDEO_TUNER_NTSC; - if (std2.id & V4L2_STD_SECAM) - tun->flags |= VIDEO_TUNER_SECAM; - } - - err = drv(inode, file, VIDIOC_G_STD, &sid); + if (0 != sid) { + err = drv(inode, file, VIDIOC_S_STD, &sid); if (err < 0) - dprintk("VIDIOCGTUNER / VIDIOC_G_STD: %d\n",err); - if (err == 0) { - if (sid & V4L2_STD_PAL) - tun->mode = VIDEO_MODE_PAL; - if (sid & V4L2_STD_NTSC) - tun->mode = VIDEO_MODE_NTSC; - if (sid & V4L2_STD_SECAM) - tun->mode = VIDEO_MODE_SECAM; - } - - if (tun2.capability & V4L2_TUNER_CAP_LOW) - tun->flags |= VIDEO_TUNER_LOW; - if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO) - tun->flags |= VIDEO_TUNER_STEREO_ON; - tun->signal = tun2.signal; - break; + dprintk("VIDIOCSCHAN / VIDIOC_S_STD: %d\n", err); } - case VIDIOCSTUNER: /* select a tuner input */ - { - struct video_tuner *tun = arg; - struct v4l2_tuner t; - memset(&t,0,sizeof(t)); - - t.index=tun->tuner; + return err; +} - err = drv(inode, file, VIDIOC_S_INPUT, &t); - if (err < 0) - dprintk("VIDIOCSTUNER / VIDIOC_S_INPUT: %d\n",err); +static noinline int v4l1_compat_get_picture( + struct video_picture *pict, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_format *fmt; - break; + fmt = kzalloc(sizeof(*fmt), GFP_KERNEL); + if (!fmt) { + err = -ENOMEM; + return err; } - case VIDIOCGFREQ: /* get frequency */ - { - unsigned long *freq = arg; - memset(&freq2,0,sizeof(freq2)); - freq2.tuner = 0; - err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); - if (err < 0) - dprintk("VIDIOCGFREQ / VIDIOC_G_FREQUENCY: %d\n",err); - if (0 == err) - *freq = freq2.frequency; - break; + pict->brightness = get_v4l_control(inode, file, + V4L2_CID_BRIGHTNESS, drv); + pict->hue = get_v4l_control(inode, file, + V4L2_CID_HUE, drv); + pict->contrast = get_v4l_control(inode, file, + V4L2_CID_CONTRAST, drv); + pict->colour = get_v4l_control(inode, file, + V4L2_CID_SATURATION, drv); + pict->whiteness = get_v4l_control(inode, file, + V4L2_CID_WHITENESS, drv); + + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + err = drv(inode, file, VIDIOC_G_FMT, fmt); + if (err < 0) { + dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n", err); + goto done; } - case VIDIOCSFREQ: /* set frequency */ - { - unsigned long *freq = arg; - memset(&freq2,0,sizeof(freq2)); - drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); - freq2.frequency = *freq; - err = drv(inode, file, VIDIOC_S_FREQUENCY, &freq2); - if (err < 0) - dprintk("VIDIOCSFREQ / VIDIOC_S_FREQUENCY: %d\n",err); - break; + pict->depth = ((fmt->fmt.pix.bytesperline << 3) + + (fmt->fmt.pix.width - 1)) + / fmt->fmt.pix.width; + pict->palette = pixelformat_to_palette( + fmt->fmt.pix.pixelformat); +done: + kfree(fmt); + return err; +} + +static noinline int v4l1_compat_set_picture( + struct video_picture *pict, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_framebuffer fbuf; + int mem_err = 0, ovl_err = 0; + struct v4l2_format *fmt; + + fmt = kzalloc(sizeof(*fmt), GFP_KERNEL); + if (!fmt) { + err = -ENOMEM; + return err; + } + memset(&fbuf, 0, sizeof(fbuf)); + + set_v4l_control(inode, file, + V4L2_CID_BRIGHTNESS, pict->brightness, drv); + set_v4l_control(inode, file, + V4L2_CID_HUE, pict->hue, drv); + set_v4l_control(inode, file, + V4L2_CID_CONTRAST, pict->contrast, drv); + set_v4l_control(inode, file, + V4L2_CID_SATURATION, pict->colour, drv); + set_v4l_control(inode, file, + V4L2_CID_WHITENESS, pict->whiteness, drv); + /* + * V4L1 uses this ioctl to set both memory capture and overlay + * pixel format, while V4L2 has two different ioctls for this. + * Some cards may not support one or the other, and may support + * different pixel formats for memory vs overlay. + */ + + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + err = drv(inode, file, VIDIOC_G_FMT, fmt); + /* If VIDIOC_G_FMT failed, then the driver likely doesn't + support memory capture. Trying to set the memory capture + parameters would be pointless. */ + if (err < 0) { + dprintk("VIDIOCSPICT / VIDIOC_G_FMT: %d\n", err); + mem_err = -1000; /* didn't even try */ + } else if (fmt->fmt.pix.pixelformat != + palette_to_pixelformat(pict->palette)) { + fmt->fmt.pix.pixelformat = palette_to_pixelformat( + pict->palette); + mem_err = drv(inode, file, VIDIOC_S_FMT, fmt); + if (mem_err < 0) + dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n", + mem_err); } - case VIDIOCGAUDIO: /* get audio properties/controls */ - { - struct video_audio *aud = arg; - memset(&aud2,0,sizeof(aud2)); - err = drv(inode, file, VIDIOC_G_AUDIO, &aud2); - if (err < 0) { - dprintk("VIDIOCGAUDIO / VIDIOC_G_AUDIO: %d\n",err); - break; - } - memcpy(aud->name, aud2.name, - min(sizeof(aud->name), sizeof(aud2.name))); - aud->name[sizeof(aud->name) - 1] = 0; - aud->audio = aud2.index; - aud->flags = 0; - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, drv); - if (i >= 0) { - aud->volume = i; - aud->flags |= VIDEO_AUDIO_VOLUME; - } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, drv); - if (i >= 0) { - aud->bass = i; - aud->flags |= VIDEO_AUDIO_BASS; - } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, drv); - if (i >= 0) { - aud->treble = i; - aud->flags |= VIDEO_AUDIO_TREBLE; - } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, drv); - if (i >= 0) { - aud->balance = i; - aud->flags |= VIDEO_AUDIO_BALANCE; - } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, drv); - if (i >= 0) { - if (i) - aud->flags |= VIDEO_AUDIO_MUTE; - aud->flags |= VIDEO_AUDIO_MUTABLE; - } - aud->step = 1; - qctrl2.id = V4L2_CID_AUDIO_VOLUME; - if (drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2) == 0 && - !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) - aud->step = qctrl2.step; - aud->mode = 0; - - memset(&tun2,0,sizeof(tun2)); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); - if (err < 0) { - dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %d\n",err); + err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + /* If VIDIOC_G_FBUF failed, then the driver likely doesn't + support overlay. Trying to set the overlay parameters + would be quite pointless. */ + if (err < 0) { + dprintk("VIDIOCSPICT / VIDIOC_G_FBUF: %d\n", err); + ovl_err = -1000; /* didn't even try */ + } else if (fbuf.fmt.pixelformat != + palette_to_pixelformat(pict->palette)) { + fbuf.fmt.pixelformat = palette_to_pixelformat( + pict->palette); + ovl_err = drv(inode, file, VIDIOC_S_FBUF, &fbuf); + if (ovl_err < 0) + dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n", + ovl_err); + } + if (ovl_err < 0 && mem_err < 0) { + /* ioctl failed, couldn't set either parameter */ + if (mem_err != -1000) + err = mem_err; + else if (ovl_err == -EPERM) err = 0; + else + err = ovl_err; + } else + err = 0; + kfree(fmt); + return err; +} + +static noinline int v4l1_compat_get_tuner( + struct video_tuner *tun, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err, i; + struct v4l2_tuner tun2; + struct v4l2_standard std2; + v4l2_std_id sid; + + memset(&tun2, 0, sizeof(tun2)); + err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + if (err < 0) { + dprintk("VIDIOCGTUNER / VIDIOC_G_TUNER: %d\n", err); + goto done; + } + memcpy(tun->name, tun2.name, + min(sizeof(tun->name), sizeof(tun2.name))); + tun->name[sizeof(tun->name) - 1] = 0; + tun->rangelow = tun2.rangelow; + tun->rangehigh = tun2.rangehigh; + tun->flags = 0; + tun->mode = VIDEO_MODE_AUTO; + + for (i = 0; i < 64; i++) { + memset(&std2, 0, sizeof(std2)); + std2.index = i; + if (0 != drv(inode, file, VIDIOC_ENUMSTD, &std2)) break; - } + if (std2.id & V4L2_STD_PAL) + tun->flags |= VIDEO_TUNER_PAL; + if (std2.id & V4L2_STD_NTSC) + tun->flags |= VIDEO_TUNER_NTSC; + if (std2.id & V4L2_STD_SECAM) + tun->flags |= VIDEO_TUNER_SECAM; + } - if (tun2.rxsubchans & V4L2_TUNER_SUB_LANG2) - aud->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; - else if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO) - aud->mode = VIDEO_SOUND_STEREO; - else if (tun2.rxsubchans & V4L2_TUNER_SUB_MONO) - aud->mode = VIDEO_SOUND_MONO; - break; + err = drv(inode, file, VIDIOC_G_STD, &sid); + if (err < 0) + dprintk("VIDIOCGTUNER / VIDIOC_G_STD: %d\n", err); + if (err == 0) { + if (sid & V4L2_STD_PAL) + tun->mode = VIDEO_MODE_PAL; + if (sid & V4L2_STD_NTSC) + tun->mode = VIDEO_MODE_NTSC; + if (sid & V4L2_STD_SECAM) + tun->mode = VIDEO_MODE_SECAM; } - case VIDIOCSAUDIO: /* set audio controls */ - { - struct video_audio *aud = arg; - memset(&aud2,0,sizeof(aud2)); - memset(&tun2,0,sizeof(tun2)); + if (tun2.capability & V4L2_TUNER_CAP_LOW) + tun->flags |= VIDEO_TUNER_LOW; + if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO) + tun->flags |= VIDEO_TUNER_STEREO_ON; + tun->signal = tun2.signal; +done: + return err; +} - aud2.index = aud->audio; - err = drv(inode, file, VIDIOC_S_AUDIO, &aud2); - if (err < 0) { - dprintk("VIDIOCSAUDIO / VIDIOC_S_AUDIO: %d\n",err); - break; - } +static noinline int v4l1_compat_select_tuner( + struct video_tuner *tun, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_tuner t;/*84 bytes on x86_64*/ + memset(&t, 0, sizeof(t)); - set_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, - aud->volume, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, - aud->bass, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, - aud->treble, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, - aud->balance, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, - !!(aud->flags & VIDEO_AUDIO_MUTE), drv); - - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); - if (err < 0) - dprintk("VIDIOCSAUDIO / VIDIOC_G_TUNER: %d\n",err); - if (err == 0) { - switch (aud->mode) { - default: - case VIDEO_SOUND_MONO: - case VIDEO_SOUND_LANG1: - tun2.audmode = V4L2_TUNER_MODE_MONO; - break; - case VIDEO_SOUND_STEREO: - tun2.audmode = V4L2_TUNER_MODE_STEREO; - break; - case VIDEO_SOUND_LANG2: - tun2.audmode = V4L2_TUNER_MODE_LANG2; - break; - } - err = drv(inode, file, VIDIOC_S_TUNER, &tun2); - if (err < 0) - dprintk("VIDIOCSAUDIO / VIDIOC_S_TUNER: %d\n",err); - } + t.index = tun->tuner; + + err = drv(inode, file, VIDIOC_S_INPUT, &t); + if (err < 0) + dprintk("VIDIOCSTUNER / VIDIOC_S_INPUT: %d\n", err); + return err; +} + +static noinline int v4l1_compat_get_frequency( + unsigned long *freq, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_frequency freq2; + memset(&freq2, 0, sizeof(freq2)); + + freq2.tuner = 0; + err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); + if (err < 0) + dprintk("VIDIOCGFREQ / VIDIOC_G_FREQUENCY: %d\n", err); + if (0 == err) + *freq = freq2.frequency; + return err; +} + +static noinline int v4l1_compat_set_frequency( + unsigned long *freq, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_frequency freq2; + memset(&freq2, 0, sizeof(freq2)); + + drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); + freq2.frequency = *freq; + err = drv(inode, file, VIDIOC_S_FREQUENCY, &freq2); + if (err < 0) + dprintk("VIDIOCSFREQ / VIDIOC_S_FREQUENCY: %d\n", err); + return err; +} + +static noinline int v4l1_compat_get_audio( + struct video_audio *aud, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err, i; + struct v4l2_queryctrl qctrl2; + struct v4l2_audio aud2; + struct v4l2_tuner tun2; + memset(&aud2, 0, sizeof(aud2)); + + err = drv(inode, file, VIDIOC_G_AUDIO, &aud2); + if (err < 0) { + dprintk("VIDIOCGAUDIO / VIDIOC_G_AUDIO: %d\n", err); + goto done; + } + memcpy(aud->name, aud2.name, + min(sizeof(aud->name), sizeof(aud2.name))); + aud->name[sizeof(aud->name) - 1] = 0; + aud->audio = aud2.index; + aud->flags = 0; + i = get_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, drv); + if (i >= 0) { + aud->volume = i; + aud->flags |= VIDEO_AUDIO_VOLUME; + } + i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, drv); + if (i >= 0) { + aud->bass = i; + aud->flags |= VIDEO_AUDIO_BASS; + } + i = get_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, drv); + if (i >= 0) { + aud->treble = i; + aud->flags |= VIDEO_AUDIO_TREBLE; + } + i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, drv); + if (i >= 0) { + aud->balance = i; + aud->flags |= VIDEO_AUDIO_BALANCE; + } + i = get_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, drv); + if (i >= 0) { + if (i) + aud->flags |= VIDEO_AUDIO_MUTE; + aud->flags |= VIDEO_AUDIO_MUTABLE; + } + aud->step = 1; + qctrl2.id = V4L2_CID_AUDIO_VOLUME; + if (drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2) == 0 && + !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) + aud->step = qctrl2.step; + aud->mode = 0; + + memset(&tun2, 0, sizeof(tun2)); + err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + if (err < 0) { + dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %d\n", err); err = 0; - break; + goto done; } - case VIDIOCMCAPTURE: /* capture a frame */ - { - struct video_mmap *mm = arg; - fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); - if (!fmt2) { - err = -ENOMEM; - break; - } - memset(&buf2,0,sizeof(buf2)); + if (tun2.rxsubchans & V4L2_TUNER_SUB_LANG2) + aud->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; + else if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO) + aud->mode = VIDEO_SOUND_STEREO; + else if (tun2.rxsubchans & V4L2_TUNER_SUB_MONO) + aud->mode = VIDEO_SOUND_MONO; +done: + return err; +} - fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt2); - if (err < 0) { - dprintk("VIDIOCMCAPTURE / VIDIOC_G_FMT: %d\n",err); +static noinline int v4l1_compat_set_audio( + struct video_audio *aud, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_audio aud2; + struct v4l2_tuner tun2; + + memset(&aud2, 0, sizeof(aud2)); + memset(&tun2, 0, sizeof(tun2)); + + aud2.index = aud->audio; + err = drv(inode, file, VIDIOC_S_AUDIO, &aud2); + if (err < 0) { + dprintk("VIDIOCSAUDIO / VIDIOC_S_AUDIO: %d\n", err); + goto done; + } + + set_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, + aud->volume, drv); + set_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, + aud->bass, drv); + set_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, + aud->treble, drv); + set_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, + aud->balance, drv); + set_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, + !!(aud->flags & VIDEO_AUDIO_MUTE), drv); + + err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + if (err < 0) + dprintk("VIDIOCSAUDIO / VIDIOC_G_TUNER: %d\n", err); + if (err == 0) { + switch (aud->mode) { + default: + case VIDEO_SOUND_MONO: + case VIDEO_SOUND_LANG1: + tun2.audmode = V4L2_TUNER_MODE_MONO; break; - } - if (mm->width != fmt2->fmt.pix.width || - mm->height != fmt2->fmt.pix.height || - palette_to_pixelformat(mm->format) != - fmt2->fmt.pix.pixelformat) - {/* New capture format... */ - fmt2->fmt.pix.width = mm->width; - fmt2->fmt.pix.height = mm->height; - fmt2->fmt.pix.pixelformat = - palette_to_pixelformat(mm->format); - fmt2->fmt.pix.field = V4L2_FIELD_ANY; - fmt2->fmt.pix.bytesperline = 0; - err = drv(inode, file, VIDIOC_S_FMT, fmt2); - if (err < 0) { - dprintk("VIDIOCMCAPTURE / VIDIOC_S_FMT: %d\n",err); - break; - } - } - buf2.index = mm->frame; - buf2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf2); - if (err < 0) { - dprintk("VIDIOCMCAPTURE / VIDIOC_QUERYBUF: %d\n",err); + case VIDEO_SOUND_STEREO: + tun2.audmode = V4L2_TUNER_MODE_STEREO; break; - } - err = drv(inode, file, VIDIOC_QBUF, &buf2); - if (err < 0) { - dprintk("VIDIOCMCAPTURE / VIDIOC_QBUF: %d\n",err); + case VIDEO_SOUND_LANG2: + tun2.audmode = V4L2_TUNER_MODE_LANG2; break; } - err = drv(inode, file, VIDIOC_STREAMON, &captype); + err = drv(inode, file, VIDIOC_S_TUNER, &tun2); if (err < 0) - dprintk("VIDIOCMCAPTURE / VIDIOC_STREAMON: %d\n",err); - break; + dprintk("VIDIOCSAUDIO / VIDIOC_S_TUNER: %d\n", err); } - case VIDIOCSYNC: /* wait for a frame */ - { - int *i = arg; + err = 0; +done: + return err; +} - memset(&buf2,0,sizeof(buf2)); - buf2.index = *i; - buf2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf2); - if (err < 0) { - /* No such buffer */ - dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n",err); - break; - } - if (!(buf2.flags & V4L2_BUF_FLAG_MAPPED)) { - /* Buffer is not mapped */ - err = -EINVAL; - break; - } +static noinline int v4l1_compat_capture_frame( + struct video_mmap *mm, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE; + struct v4l2_buffer buf; + struct v4l2_format *fmt; + + fmt = kzalloc(sizeof(*fmt), GFP_KERNEL); + if (!fmt) { + err = -ENOMEM; + return err; + } + memset(&buf, 0, sizeof(buf)); - /* make sure capture actually runs so we don't block forever */ - err = drv(inode, file, VIDIOC_STREAMON, &captype); + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + err = drv(inode, file, VIDIOC_G_FMT, fmt); + if (err < 0) { + dprintk("VIDIOCMCAPTURE / VIDIOC_G_FMT: %d\n", err); + goto done; + } + if (mm->width != fmt->fmt.pix.width || + mm->height != fmt->fmt.pix.height || + palette_to_pixelformat(mm->format) != + fmt->fmt.pix.pixelformat) { + /* New capture format... */ + fmt->fmt.pix.width = mm->width; + fmt->fmt.pix.height = mm->height; + fmt->fmt.pix.pixelformat = + palette_to_pixelformat(mm->format); + fmt->fmt.pix.field = V4L2_FIELD_ANY; + fmt->fmt.pix.bytesperline = 0; + err = drv(inode, file, VIDIOC_S_FMT, fmt); if (err < 0) { - dprintk("VIDIOCSYNC / VIDIOC_STREAMON: %d\n",err); - break; + dprintk("VIDIOCMCAPTURE / VIDIOC_S_FMT: %d\n", err); + goto done; } + } + buf.index = mm->frame; + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + if (err < 0) { + dprintk("VIDIOCMCAPTURE / VIDIOC_QUERYBUF: %d\n", err); + goto done; + } + err = drv(inode, file, VIDIOC_QBUF, &buf); + if (err < 0) { + dprintk("VIDIOCMCAPTURE / VIDIOC_QBUF: %d\n", err); + goto done; + } + err = drv(inode, file, VIDIOC_STREAMON, &captype); + if (err < 0) + dprintk("VIDIOCMCAPTURE / VIDIOC_STREAMON: %d\n", err); +done: + kfree(fmt); + return err; +} - /* Loop as long as the buffer is queued, but not done */ - while ((buf2.flags & - (V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE)) - == V4L2_BUF_FLAG_QUEUED) - { - err = poll_one(file); - if (err < 0 || /* error or sleep was interrupted */ - err == 0) /* timeout? Shouldn't occur. */ - break; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf2); - if (err < 0) - dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n",err); - } - if (!(buf2.flags & V4L2_BUF_FLAG_DONE)) /* not done */ - break; - do { - err = drv(inode, file, VIDIOC_DQBUF, &buf2); - if (err < 0) - dprintk("VIDIOCSYNC / VIDIOC_DQBUF: %d\n",err); - } while (err == 0 && buf2.index != *i); - break; +static noinline int v4l1_compat_sync( + int *i, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE; + struct v4l2_buffer buf; + struct poll_wqueues *pwq; + + memset(&buf, 0, sizeof(buf)); + buf.index = *i; + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + if (err < 0) { + /* No such buffer */ + dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err); + goto done; + } + if (!(buf.flags & V4L2_BUF_FLAG_MAPPED)) { + /* Buffer is not mapped */ + err = -EINVAL; + goto done; } - case VIDIOCGVBIFMT: /* query VBI data capture format */ - { - struct vbi_format *fmt = arg; + /* make sure capture actually runs so we don't block forever */ + err = drv(inode, file, VIDIOC_STREAMON, &captype); + if (err < 0) { + dprintk("VIDIOCSYNC / VIDIOC_STREAMON: %d\n", err); + goto done; + } - fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); - if (!fmt2) { - err = -ENOMEM; + pwq = kmalloc(sizeof(*pwq), GFP_KERNEL); + /* Loop as long as the buffer is queued, but not done */ + while ((buf.flags & (V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE)) + == V4L2_BUF_FLAG_QUEUED) { + err = poll_one(file, pwq); + if (err < 0 || /* error or sleep was interrupted */ + err == 0) /* timeout? Shouldn't occur. */ break; - } - fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE; + err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + if (err < 0) + dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err); + } + kfree(pwq); + if (!(buf.flags & V4L2_BUF_FLAG_DONE)) /* not done */ + goto done; + do { + err = drv(inode, file, VIDIOC_DQBUF, &buf); + if (err < 0) + dprintk("VIDIOCSYNC / VIDIOC_DQBUF: %d\n", err); + } while (err == 0 && buf.index != *i); +done: + return err; +} - err = drv(inode, file, VIDIOC_G_FMT, fmt2); - if (err < 0) { - dprintk("VIDIOCGVBIFMT / VIDIOC_G_FMT: %d\n", err); - break; - } - if (fmt2->fmt.vbi.sample_format != V4L2_PIX_FMT_GREY) { - err = -EINVAL; - break; - } - memset(fmt, 0, sizeof(*fmt)); - fmt->samples_per_line = fmt2->fmt.vbi.samples_per_line; - fmt->sampling_rate = fmt2->fmt.vbi.sampling_rate; - fmt->sample_format = VIDEO_PALETTE_RAW; - fmt->start[0] = fmt2->fmt.vbi.start[0]; - fmt->count[0] = fmt2->fmt.vbi.count[0]; - fmt->start[1] = fmt2->fmt.vbi.start[1]; - fmt->count[1] = fmt2->fmt.vbi.count[1]; - fmt->flags = fmt2->fmt.vbi.flags & 0x03; - break; +static noinline int v4l1_compat_get_vbi_format( + struct vbi_format *fmt, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_format *fmt2; + + fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); + if (!fmt2) { + err = -ENOMEM; + return err; } - case VIDIOCSVBIFMT: - { - struct vbi_format *fmt = arg; + fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE; - if (VIDEO_PALETTE_RAW != fmt->sample_format) { - err = -EINVAL; - break; - } + err = drv(inode, file, VIDIOC_G_FMT, fmt2); + if (err < 0) { + dprintk("VIDIOCGVBIFMT / VIDIOC_G_FMT: %d\n", err); + goto done; + } + if (fmt2->fmt.vbi.sample_format != V4L2_PIX_FMT_GREY) { + err = -EINVAL; + goto done; + } + memset(fmt, 0, sizeof(*fmt)); + fmt->samples_per_line = fmt2->fmt.vbi.samples_per_line; + fmt->sampling_rate = fmt2->fmt.vbi.sampling_rate; + fmt->sample_format = VIDEO_PALETTE_RAW; + fmt->start[0] = fmt2->fmt.vbi.start[0]; + fmt->count[0] = fmt2->fmt.vbi.count[0]; + fmt->start[1] = fmt2->fmt.vbi.start[1]; + fmt->count[1] = fmt2->fmt.vbi.count[1]; + fmt->flags = fmt2->fmt.vbi.flags & 0x03; +done: + kfree(fmt2); + return err; +} - fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); - if (!fmt2) { - err = -ENOMEM; - break; - } - fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE; - fmt2->fmt.vbi.samples_per_line = fmt->samples_per_line; - fmt2->fmt.vbi.sampling_rate = fmt->sampling_rate; - fmt2->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; - fmt2->fmt.vbi.start[0] = fmt->start[0]; - fmt2->fmt.vbi.count[0] = fmt->count[0]; - fmt2->fmt.vbi.start[1] = fmt->start[1]; - fmt2->fmt.vbi.count[1] = fmt->count[1]; - fmt2->fmt.vbi.flags = fmt->flags; - err = drv(inode, file, VIDIOC_TRY_FMT, fmt2); - if (err < 0) { - dprintk("VIDIOCSVBIFMT / VIDIOC_TRY_FMT: %d\n", err); - break; - } +static noinline int v4l1_compat_set_vbi_format( + struct vbi_format *fmt, + struct inode *inode, + struct file *file, + v4l2_kioctl drv) +{ + int err; + struct v4l2_format *fmt2 = NULL; - if (fmt2->fmt.vbi.samples_per_line != fmt->samples_per_line || - fmt2->fmt.vbi.sampling_rate != fmt->sampling_rate || - fmt2->fmt.vbi.sample_format != V4L2_PIX_FMT_GREY || - fmt2->fmt.vbi.start[0] != fmt->start[0] || - fmt2->fmt.vbi.count[0] != fmt->count[0] || - fmt2->fmt.vbi.start[1] != fmt->start[1] || - fmt2->fmt.vbi.count[1] != fmt->count[1] || - fmt2->fmt.vbi.flags != fmt->flags) { - err = -EINVAL; - break; - } - err = drv(inode, file, VIDIOC_S_FMT, fmt2); - if (err < 0) - dprintk("VIDIOCSVBIFMT / VIDIOC_S_FMT: %d\n", err); - break; + if (VIDEO_PALETTE_RAW != fmt->sample_format) { + err = -EINVAL; + return err; } + fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL); + if (!fmt2) { + err = -ENOMEM; + return err; + } + fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE; + fmt2->fmt.vbi.samples_per_line = fmt->samples_per_line; + fmt2->fmt.vbi.sampling_rate = fmt->sampling_rate; + fmt2->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + fmt2->fmt.vbi.start[0] = fmt->start[0]; + fmt2->fmt.vbi.count[0] = fmt->count[0]; + fmt2->fmt.vbi.start[1] = fmt->start[1]; + fmt2->fmt.vbi.count[1] = fmt->count[1]; + fmt2->fmt.vbi.flags = fmt->flags; + err = drv(inode, file, VIDIOC_TRY_FMT, fmt2); + if (err < 0) { + dprintk("VIDIOCSVBIFMT / VIDIOC_TRY_FMT: %d\n", err); + goto done; + } + + if (fmt2->fmt.vbi.samples_per_line != fmt->samples_per_line || + fmt2->fmt.vbi.sampling_rate != fmt->sampling_rate || + fmt2->fmt.vbi.sample_format != V4L2_PIX_FMT_GREY || + fmt2->fmt.vbi.start[0] != fmt->start[0] || + fmt2->fmt.vbi.count[0] != fmt->count[0] || + fmt2->fmt.vbi.start[1] != fmt->start[1] || + fmt2->fmt.vbi.count[1] != fmt->count[1] || + fmt2->fmt.vbi.flags != fmt->flags) { + err = -EINVAL; + goto done; + } + err = drv(inode, file, VIDIOC_S_FMT, fmt2); + if (err < 0) + dprintk("VIDIOCSVBIFMT / VIDIOC_S_FMT: %d\n", err); +done: + kfree(fmt2); + return err; +} + +/* + * This function is exported. + */ +int +v4l_compat_translate_ioctl(struct inode *inode, + struct file *file, + int cmd, + void *arg, + v4l2_kioctl drv) +{ + int err; + + switch (cmd) { + case VIDIOCGCAP: /* capability */ + err = v4l1_compat_get_capabilities(arg, inode, file, drv); + break; + case VIDIOCGFBUF: /* get frame buffer */ + err = v4l1_compat_get_frame_buffer(arg, inode, file, drv); + break; + case VIDIOCSFBUF: /* set frame buffer */ + err = v4l1_compat_set_frame_buffer(arg, inode, file, drv); + break; + case VIDIOCGWIN: /* get window or capture dimensions */ + err = v4l1_compat_get_win_cap_dimensions(arg, inode, file, drv); + break; + case VIDIOCSWIN: /* set window and/or capture dimensions */ + err = v4l1_compat_set_win_cap_dimensions(arg, inode, file, drv); + break; + case VIDIOCCAPTURE: /* turn on/off preview */ + err = v4l1_compat_turn_preview_on_off(arg, inode, file, drv); + break; + case VIDIOCGCHAN: /* get input information */ + err = v4l1_compat_get_input_info(arg, inode, file, drv); + break; + case VIDIOCSCHAN: /* set input */ + err = v4l1_compat_set_input(arg, inode, file, drv); + break; + case VIDIOCGPICT: /* get tone controls & partial capture format */ + err = v4l1_compat_get_picture(arg, inode, file, drv); + break; + case VIDIOCSPICT: /* set tone controls & partial capture format */ + err = v4l1_compat_set_picture(arg, inode, file, drv); + break; + case VIDIOCGTUNER: /* get tuner information */ + err = v4l1_compat_get_tuner(arg, inode, file, drv); + break; + case VIDIOCSTUNER: /* select a tuner input */ + err = v4l1_compat_select_tuner(arg, inode, file, drv); + break; + case VIDIOCGFREQ: /* get frequency */ + err = v4l1_compat_get_frequency(arg, inode, file, drv); + break; + case VIDIOCSFREQ: /* set frequency */ + err = v4l1_compat_set_frequency(arg, inode, file, drv); + break; + case VIDIOCGAUDIO: /* get audio properties/controls */ + err = v4l1_compat_get_audio(arg, inode, file, drv); + break; + case VIDIOCSAUDIO: /* set audio controls */ + err = v4l1_compat_set_audio(arg, inode, file, drv); + break; + case VIDIOCMCAPTURE: /* capture a frame */ + err = v4l1_compat_capture_frame(arg, inode, file, drv); + break; + case VIDIOCSYNC: /* wait for a frame */ + err = v4l1_compat_sync(arg, inode, file, drv); + break; + case VIDIOCGVBIFMT: /* query VBI data capture format */ + err = v4l1_compat_get_vbi_format(arg, inode, file, drv); + break; + case VIDIOCSVBIFMT: + err = v4l1_compat_set_vbi_format(arg, inode, file, drv); + break; default: err = -ENOIOCTLCMD; break; } - kfree(cap2); - kfree(fmt2); return err; } - EXPORT_SYMBOL(v4l_compat_translate_ioctl); /* diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 34deb68ae56..e9dd996fd5d 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -710,13 +710,14 @@ EXPORT_SYMBOL(v4l2_chip_ident_i2c_client); /* Helper function for I2C legacy drivers */ int v4l2_i2c_attach(struct i2c_adapter *adapter, int address, struct i2c_driver *driver, - const char *name, int (*probe)(struct i2c_client *)) + const char *name, + int (*probe)(struct i2c_client *, const struct i2c_device_id *)) { struct i2c_client *client; int err; client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == 0) + if (!client) return -ENOMEM; client->addr = address; @@ -724,7 +725,7 @@ int v4l2_i2c_attach(struct i2c_adapter *adapter, int address, struct i2c_driver client->driver = driver; strlcpy(client->name, name, sizeof(client->name)); - err = probe(client); + err = probe(client, NULL); if (err == 0) { i2c_attach_client(client); } else { diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c index a545dcaf857..0e4549922f2 100644 --- a/drivers/media/video/v4l2-int-device.c +++ b/drivers/media/video/v4l2-int-device.c @@ -156,3 +156,5 @@ int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg) find_ioctl(d->u.slave, cmd, (v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg); } + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index eab79ffdf56..0a88c44ace0 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -64,32 +64,25 @@ void *videobuf_alloc(struct videobuf_queue *q) return vb; } +#define WAITON_CONDITION (vb->state != VIDEOBUF_ACTIVE &&\ + vb->state != VIDEOBUF_QUEUED) int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr) { - int retval = 0; - DECLARE_WAITQUEUE(wait, current); - MAGIC_CHECK(vb->magic, MAGIC_BUFFER); - add_wait_queue(&vb->done, &wait); - while (vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) { - if (non_blocking) { - retval = -EAGAIN; - break; - } - set_current_state(intr ? TASK_INTERRUPTIBLE - : TASK_UNINTERRUPTIBLE); - if (vb->state == VIDEOBUF_ACTIVE || - vb->state == VIDEOBUF_QUEUED) - schedule(); - set_current_state(TASK_RUNNING); - if (intr && signal_pending(current)) { - dprintk(1, "buffer waiton: -EINTR\n"); - retval = -EINTR; - break; - } + + if (non_blocking) { + if (WAITON_CONDITION) + return 0; + else + return -EAGAIN; } - remove_wait_queue(&vb->done, &wait); - return retval; + + if (intr) + return wait_event_interruptible(vb->done, WAITON_CONDITION); + else + wait_event(vb->done, WAITON_CONDITION); + + return 0; } int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb, @@ -98,29 +91,25 @@ int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb, MAGIC_CHECK(vb->magic, MAGIC_BUFFER); MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - /* This is required to avoid OOPS on some cases, - since mmap_mapper() method should be called before _iolock. - On some cases, the mmap_mapper() is called only after scheduling. - */ - if (vb->memory == V4L2_MEMORY_MMAP) { - wait_event_timeout(vb->done, q->is_mmapped, - msecs_to_jiffies(100)); - if (!q->is_mmapped) { - printk(KERN_ERR - "Error: mmap_mapper() never called!\n"); - return -EINVAL; - } - } - return CALL(q, iolock, q, vb, fbuf); } +void *videobuf_queue_to_vmalloc (struct videobuf_queue *q, + struct videobuf_buffer *buf) +{ + if (q->int_ops->vmalloc) + return q->int_ops->vmalloc(buf); + else + return NULL; +} +EXPORT_SYMBOL_GPL(videobuf_queue_to_vmalloc); + /* --------------------------------------------------------------------- */ void videobuf_queue_core_init(struct videobuf_queue *q, struct videobuf_queue_ops *ops, - void *dev, + struct device *dev, spinlock_t *irqlock, enum v4l2_buf_type type, enum v4l2_field field, @@ -144,10 +133,14 @@ void videobuf_queue_core_init(struct videobuf_queue *q, BUG_ON(!q->ops->buf_queue); BUG_ON(!q->ops->buf_release); + /* Lock is mandatory for queue_cancel to work */ + BUG_ON(!irqlock); + /* Having implementations for abstract methods are mandatory */ BUG_ON(!q->int_ops); mutex_init(&q->vb_lock); + init_waitqueue_head(&q->wait); INIT_LIST_HEAD(&q->stream); } @@ -195,19 +188,22 @@ void videobuf_queue_cancel(struct videobuf_queue *q) unsigned long flags = 0; int i; + q->streaming = 0; + q->reading = 0; + wake_up_interruptible_sync(&q->wait); + /* remove queued buffers from list */ - if (q->irqlock) - spin_lock_irqsave(q->irqlock, flags); + spin_lock_irqsave(q->irqlock, flags); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; if (q->bufs[i]->state == VIDEOBUF_QUEUED) { list_del(&q->bufs[i]->queue); q->bufs[i]->state = VIDEOBUF_ERROR; + wake_up_all(&q->bufs[i]->done); } } - if (q->irqlock) - spin_unlock_irqrestore(q->irqlock, flags); + spin_unlock_irqrestore(q->irqlock, flags); /* free all buffers + clear queue */ for (i = 0; i < VIDEO_MAX_FRAME; i++) { @@ -335,7 +331,7 @@ int videobuf_mmap_free(struct videobuf_queue *q) } /* Locking: Caller holds q->vb_lock */ -static int __videobuf_mmap_setup(struct videobuf_queue *q, +int __videobuf_mmap_setup(struct videobuf_queue *q, unsigned int bcount, unsigned int bsize, enum v4l2_memory memory) { @@ -563,14 +559,13 @@ int videobuf_qbuf(struct videobuf_queue *q, list_add_tail(&buf->stream, &q->stream); if (q->streaming) { - if (q->irqlock) - spin_lock_irqsave(q->irqlock, flags); + spin_lock_irqsave(q->irqlock, flags); q->ops->buf_queue(q, buf); - if (q->irqlock) - spin_unlock_irqrestore(q->irqlock, flags); + spin_unlock_irqrestore(q->irqlock, flags); } dprintk(1, "qbuf: succeded\n"); retval = 0; + wake_up_interruptible_sync(&q->wait); done: mutex_unlock(&q->vb_lock); @@ -581,35 +576,88 @@ int videobuf_qbuf(struct videobuf_queue *q, return retval; } -int videobuf_dqbuf(struct videobuf_queue *q, - struct v4l2_buffer *b, int nonblocking) + +/* Locking: Caller holds q->vb_lock */ +static int stream_next_buffer_check_queue(struct videobuf_queue *q, int noblock) { - struct videobuf_buffer *buf; int retval; - MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - - mutex_lock(&q->vb_lock); - retval = -EBUSY; - if (q->reading) { - dprintk(1, "dqbuf: Reading running...\n"); - goto done; - } - retval = -EINVAL; - if (b->type != q->type) { - dprintk(1, "dqbuf: Wrong type.\n"); +checks: + if (!q->streaming) { + dprintk(1, "next_buffer: Not streaming\n"); + retval = -EINVAL; goto done; } + if (list_empty(&q->stream)) { - dprintk(1, "dqbuf: stream running\n"); - goto done; + if (noblock) { + retval = -EAGAIN; + dprintk(2, "next_buffer: no buffers to dequeue\n"); + goto done; + } else { + dprintk(2, "next_buffer: waiting on buffer\n"); + + /* Drop lock to avoid deadlock with qbuf */ + mutex_unlock(&q->vb_lock); + + /* Checking list_empty and streaming is safe without + * locks because we goto checks to validate while + * holding locks before proceeding */ + retval = wait_event_interruptible(q->wait, + !list_empty(&q->stream) || !q->streaming); + mutex_lock(&q->vb_lock); + + if (retval) + goto done; + + goto checks; + } } + + retval = 0; + +done: + return retval; +} + + +/* Locking: Caller holds q->vb_lock */ +static int stream_next_buffer(struct videobuf_queue *q, + struct videobuf_buffer **vb, int nonblocking) +{ + int retval; + struct videobuf_buffer *buf = NULL; + + retval = stream_next_buffer_check_queue(q, nonblocking); + if (retval) + goto done; + buf = list_entry(q->stream.next, struct videobuf_buffer, stream); retval = videobuf_waiton(buf, nonblocking, 1); + if (retval < 0) + goto done; + + *vb = buf; +done: + return retval; +} + +int videobuf_dqbuf(struct videobuf_queue *q, + struct v4l2_buffer *b, int nonblocking) +{ + struct videobuf_buffer *buf = NULL; + int retval; + + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); + + mutex_lock(&q->vb_lock); + + retval = stream_next_buffer(q, &buf, nonblocking); if (retval < 0) { - dprintk(1, "dqbuf: waiton returned %d\n", retval); + dprintk(1, "dqbuf: next_buffer error: %i\n", retval); goto done; } + switch (buf->state) { case VIDEOBUF_ERROR: dprintk(1, "dqbuf: state is error\n"); @@ -650,14 +698,13 @@ int videobuf_streamon(struct videobuf_queue *q) if (q->streaming) goto done; q->streaming = 1; - if (q->irqlock) - spin_lock_irqsave(q->irqlock, flags); + spin_lock_irqsave(q->irqlock, flags); list_for_each_entry(buf, &q->stream, stream) if (buf->state == VIDEOBUF_PREPARED) q->ops->buf_queue(q, buf); - if (q->irqlock) - spin_unlock_irqrestore(q->irqlock, flags); + spin_unlock_irqrestore(q->irqlock, flags); + wake_up_interruptible_sync(&q->wait); done: mutex_unlock(&q->vb_lock); return retval; @@ -670,7 +717,6 @@ static int __videobuf_streamoff(struct videobuf_queue *q) return -EINVAL; videobuf_queue_cancel(q); - q->streaming = 0; return 0; } @@ -712,11 +758,9 @@ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q, goto done; /* start capture & wait */ - if (q->irqlock) - spin_lock_irqsave(q->irqlock, flags); + spin_lock_irqsave(q->irqlock, flags); q->ops->buf_queue(q, q->read_buf); - if (q->irqlock) - spin_unlock_irqrestore(q->irqlock, flags); + spin_unlock_irqrestore(q->irqlock, flags); retval = videobuf_waiton(q->read_buf, 0, 0); if (0 == retval) { CALL(q, sync, q, q->read_buf); @@ -740,14 +784,13 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, { enum v4l2_field field; unsigned long flags = 0; - unsigned size, nbufs; + unsigned size = 0, nbufs = 1; int retval; MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); mutex_lock(&q->vb_lock); - nbufs = 1; size = 0; q->ops->buf_setup(q, &nbufs, &size); if (NULL == q->read_buf && @@ -778,12 +821,11 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, q->read_buf = NULL; goto done; } - if (q->irqlock) - spin_lock_irqsave(q->irqlock, flags); + spin_lock_irqsave(q->irqlock, flags); q->ops->buf_queue(q, q->read_buf); - if (q->irqlock) - spin_unlock_irqrestore(q->irqlock, flags); + spin_unlock_irqrestore(q->irqlock, flags); + q->read_off = 0; } @@ -849,12 +891,10 @@ static int __videobuf_read_start(struct videobuf_queue *q) return err; list_add_tail(&q->bufs[i]->stream, &q->stream); } - if (q->irqlock) - spin_lock_irqsave(q->irqlock, flags); + spin_lock_irqsave(q->irqlock, flags); for (i = 0; i < count; i++) q->ops->buf_queue(q, q->bufs[i]); - if (q->irqlock) - spin_unlock_irqrestore(q->irqlock, flags); + spin_unlock_irqrestore(q->irqlock, flags); q->reading = 1; return 0; } @@ -863,7 +903,6 @@ static void __videobuf_read_stop(struct videobuf_queue *q) { int i; - videobuf_queue_cancel(q); __videobuf_mmap_free(q); INIT_LIST_HEAD(&q->stream); @@ -874,7 +913,6 @@ static void __videobuf_read_stop(struct videobuf_queue *q) q->bufs[i] = NULL; } q->read_buf = NULL; - q->reading = 0; } @@ -919,7 +957,7 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - dprintk(2, "%s\n", __FUNCTION__); + dprintk(2, "%s\n", __func__); mutex_lock(&q->vb_lock); retval = -EBUSY; if (q->streaming) @@ -968,11 +1006,9 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, if (q->read_off == q->read_buf->size) { list_add_tail(&q->read_buf->stream, &q->stream); - if (q->irqlock) - spin_lock_irqsave(q->irqlock, flags); + spin_lock_irqsave(q->irqlock, flags); q->ops->buf_queue(q, q->read_buf); - if (q->irqlock) - spin_unlock_irqrestore(q->irqlock, flags); + spin_unlock_irqrestore(q->irqlock, flags); q->read_buf = NULL; } if (retval < 0) @@ -1093,6 +1129,7 @@ EXPORT_SYMBOL_GPL(videobuf_read_stream); EXPORT_SYMBOL_GPL(videobuf_read_one); EXPORT_SYMBOL_GPL(videobuf_poll_stream); +EXPORT_SYMBOL_GPL(__videobuf_mmap_setup); EXPORT_SYMBOL_GPL(videobuf_mmap_setup); EXPORT_SYMBOL_GPL(videobuf_mmap_free); EXPORT_SYMBOL_GPL(videobuf_mmap_mapper); diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c index 53fed4b74ce..03a7b946bd5 100644 --- a/drivers/media/video/videobuf-dma-sg.c +++ b/drivers/media/video/videobuf-dma-sg.c @@ -1,5 +1,5 @@ /* - * helper functions for PCI DMA video4linux capture buffers + * helper functions for SG DMA video4linux capture buffers * * The functions expect the hardware being able to scatter gatter * (i.e. the buffers are not linear in physical memory, but fragmented @@ -24,7 +24,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> -#include <linux/pci.h> +#include <linux/dma-mapping.h> #include <linux/vmalloc.h> #include <linux/pagemap.h> #include <linux/scatterlist.h> @@ -39,10 +39,10 @@ #define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \ { printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); } -static int debug = 0; +static int debug; module_param(debug, int, 0644); -MODULE_DESCRIPTION("helper module to manage video4linux pci dma sg buffers"); +MODULE_DESCRIPTION("helper module to manage video4linux dma sg buffers"); MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); MODULE_LICENSE("GPL"); @@ -119,10 +119,10 @@ videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset) struct videobuf_dmabuf *videobuf_to_dma (struct videobuf_buffer *buf) { - struct videbuf_pci_sg_memory *mem=buf->priv; - BUG_ON (!mem); + struct videobuf_dma_sg_memory *mem = buf->priv; + BUG_ON(!mem); - MAGIC_CHECK(mem->magic,MAGIC_SG_MEM); + MAGIC_CHECK(mem->magic, MAGIC_SG_MEM); return &mem->dma; } @@ -141,9 +141,14 @@ static int videobuf_dma_init_user_locked(struct videobuf_dmabuf *dma, dma->direction = direction; switch (dma->direction) { - case PCI_DMA_FROMDEVICE: rw = READ; break; - case PCI_DMA_TODEVICE: rw = WRITE; break; - default: BUG(); + case DMA_FROM_DEVICE: + rw = READ; + break; + case DMA_TO_DEVICE: + rw = WRITE; + break; + default: + BUG(); } first = (data & PAGE_MASK) >> PAGE_SHIFT; @@ -157,9 +162,6 @@ static int videobuf_dma_init_user_locked(struct videobuf_dmabuf *dma, dprintk(1,"init user [0x%lx+0x%lx => %d pages]\n", data,size,dma->nr_pages); - dma->varea = (void *) data; - - err = get_user_pages(current,current->mm, data & PAGE_MASK, dma->nr_pages, rw == READ, 1, /* force */ @@ -216,10 +218,8 @@ int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction, return 0; } -int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma) +int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma) { - void *dev=q->dev; - MAGIC_CHECK(dma->magic,MAGIC_DMABUF); BUG_ON(0 == dma->nr_pages); @@ -245,11 +245,11 @@ int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma) return -ENOMEM; } if (!dma->bus_addr) { - dma->sglen = pci_map_sg(dev,dma->sglist, + dma->sglen = dma_map_sg(q->dev, dma->sglist, dma->nr_pages, dma->direction); if (0 == dma->sglen) { printk(KERN_WARNING - "%s: videobuf_map_sg failed\n",__FUNCTION__); + "%s: videobuf_map_sg failed\n",__func__); kfree(dma->sglist); dma->sglist = NULL; dma->sglen = 0; @@ -259,26 +259,22 @@ int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma) return 0; } -int videobuf_dma_sync(struct videobuf_queue *q,struct videobuf_dmabuf *dma) +int videobuf_dma_sync(struct videobuf_queue *q, struct videobuf_dmabuf *dma) { - void *dev=q->dev; - - MAGIC_CHECK(dma->magic,MAGIC_DMABUF); + MAGIC_CHECK(dma->magic, MAGIC_DMABUF); BUG_ON(!dma->sglen); - pci_dma_sync_sg_for_cpu (dev,dma->sglist,dma->nr_pages,dma->direction); + dma_sync_sg_for_cpu(q->dev, dma->sglist, dma->nr_pages, dma->direction); return 0; } int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma) { - void *dev=q->dev; - - MAGIC_CHECK(dma->magic,MAGIC_DMABUF); + MAGIC_CHECK(dma->magic, MAGIC_DMABUF); if (!dma->sglen) return 0; - pci_unmap_sg (dev,dma->sglist,dma->nr_pages,dma->direction); + dma_unmap_sg(q->dev, dma->sglist, dma->nr_pages, dma->direction); kfree(dma->sglist); dma->sglist = NULL; @@ -301,33 +297,32 @@ int videobuf_dma_free(struct videobuf_dmabuf *dma) vfree(dma->vmalloc); dma->vmalloc = NULL; - dma->varea = NULL; if (dma->bus_addr) { dma->bus_addr = 0; } - dma->direction = PCI_DMA_NONE; + dma->direction = DMA_NONE; return 0; } /* --------------------------------------------------------------------- */ -int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma) +int videobuf_sg_dma_map(struct device *dev, struct videobuf_dmabuf *dma) { struct videobuf_queue q; - q.dev=pci; + q.dev = dev; - return (videobuf_dma_map(&q,dma)); + return videobuf_dma_map(&q, dma); } -int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma) +int videobuf_sg_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma) { struct videobuf_queue q; - q.dev=pci; + q.dev = dev; - return (videobuf_dma_unmap(&q,dma)); + return videobuf_dma_unmap(&q, dma); } /* --------------------------------------------------------------------- */ @@ -347,7 +342,7 @@ videobuf_vm_close(struct vm_area_struct *vma) { struct videobuf_mapping *map = vma->vm_private_data; struct videobuf_queue *q = map->q; - struct videbuf_pci_sg_memory *mem; + struct videobuf_dma_sg_memory *mem; int i; dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map, @@ -409,18 +404,18 @@ static struct vm_operations_struct videobuf_vm_ops = }; /* --------------------------------------------------------------------- - * PCI handlers for the generic methods + * SG handlers for the generic methods */ /* Allocated area consists on 3 parts: struct video_buffer struct <driver>_buffer (cx88_buffer, saa7134_buf, ...) - struct videobuf_pci_sg_memory + struct videobuf_dma_sg_memory */ static void *__videobuf_alloc(size_t size) { - struct videbuf_pci_sg_memory *mem; + struct videobuf_dma_sg_memory *mem; struct videobuf_buffer *vb; vb = kzalloc(size+sizeof(*mem),GFP_KERNEL); @@ -431,22 +426,32 @@ static void *__videobuf_alloc(size_t size) videobuf_dma_init(&mem->dma); dprintk(1,"%s: allocated at %p(%ld+%ld) & %p(%ld)\n", - __FUNCTION__,vb,(long)sizeof(*vb),(long)size-sizeof(*vb), + __func__,vb,(long)sizeof(*vb),(long)size-sizeof(*vb), mem,(long)sizeof(*mem)); return vb; } +static void *__videobuf_to_vmalloc (struct videobuf_buffer *buf) +{ + struct videobuf_dma_sg_memory *mem = buf->priv; + BUG_ON(!mem); + + MAGIC_CHECK(mem->magic, MAGIC_SG_MEM); + + return mem->dma.vmalloc; +} + static int __videobuf_iolock (struct videobuf_queue* q, struct videobuf_buffer *vb, struct v4l2_framebuffer *fbuf) { int err,pages; dma_addr_t bus; - struct videbuf_pci_sg_memory *mem=vb->priv; + struct videobuf_dma_sg_memory *mem = vb->priv; BUG_ON(!mem); - MAGIC_CHECK(mem->magic,MAGIC_SG_MEM); + MAGIC_CHECK(mem->magic, MAGIC_SG_MEM); switch (vb->memory) { case V4L2_MEMORY_MMAP: @@ -455,14 +460,14 @@ static int __videobuf_iolock (struct videobuf_queue* q, /* no userspace addr -- kernel bounce buffer */ pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT; err = videobuf_dma_init_kernel( &mem->dma, - PCI_DMA_FROMDEVICE, + DMA_FROM_DEVICE, pages ); if (0 != err) return err; } else if (vb->memory == V4L2_MEMORY_USERPTR) { /* dma directly to userspace */ err = videobuf_dma_init_user( &mem->dma, - PCI_DMA_FROMDEVICE, + DMA_FROM_DEVICE, vb->baddr,vb->bsize ); if (0 != err) return err; @@ -473,7 +478,7 @@ static int __videobuf_iolock (struct videobuf_queue* q, locking inversion, so don't take it here */ err = videobuf_dma_init_user_locked(&mem->dma, - PCI_DMA_FROMDEVICE, + DMA_FROM_DEVICE, vb->baddr, vb->bsize); if (0 != err) return err; @@ -490,7 +495,7 @@ static int __videobuf_iolock (struct videobuf_queue* q, */ bus = (dma_addr_t)(unsigned long)fbuf->base + vb->boff; pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT; - err = videobuf_dma_init_overlay(&mem->dma,PCI_DMA_FROMDEVICE, + err = videobuf_dma_init_overlay(&mem->dma, DMA_FROM_DEVICE, bus, pages); if (0 != err) return err; @@ -498,7 +503,7 @@ static int __videobuf_iolock (struct videobuf_queue* q, default: BUG(); } - err = videobuf_dma_map(q,&mem->dma); + err = videobuf_dma_map(q, &mem->dma); if (0 != err) return err; @@ -508,8 +513,8 @@ static int __videobuf_iolock (struct videobuf_queue* q, static int __videobuf_sync(struct videobuf_queue *q, struct videobuf_buffer *buf) { - struct videbuf_pci_sg_memory *mem=buf->priv; - BUG_ON (!mem); + struct videobuf_dma_sg_memory *mem = buf->priv; + BUG_ON(!mem); MAGIC_CHECK(mem->magic,MAGIC_SG_MEM); return videobuf_dma_sync(q,&mem->dma); @@ -532,7 +537,7 @@ static int __videobuf_mmap_free(struct videobuf_queue *q) static int __videobuf_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma) { - struct videbuf_pci_sg_memory *mem; + struct videobuf_dma_sg_memory *mem; struct videobuf_mapping *map; unsigned int first,last,size,i; int retval; @@ -547,12 +552,20 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, goto done; } + /* This function maintains backwards compatibility with V4L1 and will + * map more than one buffer if the vma length is equal to the combined + * size of multiple buffers than it will map them together. See + * VIDIOCGMBUF in the v4l spec + * + * TODO: Allow drivers to specify if they support this mode + */ + /* look for first buffer to map */ for (first = 0; first < VIDEO_MAX_FRAME; first++) { if (NULL == q->bufs[first]) continue; mem=q->bufs[first]->priv; - BUG_ON (!mem); + BUG_ON(!mem); MAGIC_CHECK(mem->magic,MAGIC_SG_MEM); if (V4L2_MEMORY_MMAP != q->bufs[first]->memory) @@ -591,10 +604,16 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL); if (NULL == map) goto done; - for (size = 0, i = first; i <= last; size += q->bufs[i++]->bsize) { + + size = 0; + for (i = first; i <= last; i++) { + if (NULL == q->bufs[i]) + continue; q->bufs[i]->map = map; q->bufs[i]->baddr = vma->vm_start + size; + size += q->bufs[i]->bsize; } + map->count = 1; map->start = vma->vm_start; map->end = vma->vm_end; @@ -615,8 +634,8 @@ static int __videobuf_copy_to_user ( struct videobuf_queue *q, char __user *data, size_t count, int nonblocking ) { - struct videbuf_pci_sg_memory *mem=q->read_buf->priv; - BUG_ON (!mem); + struct videobuf_dma_sg_memory *mem = q->read_buf->priv; + BUG_ON(!mem); MAGIC_CHECK(mem->magic,MAGIC_SG_MEM); /* copy to userspace */ @@ -634,8 +653,8 @@ static int __videobuf_copy_stream ( struct videobuf_queue *q, int vbihack, int nonblocking ) { unsigned int *fc; - struct videbuf_pci_sg_memory *mem=q->read_buf->priv; - BUG_ON (!mem); + struct videobuf_dma_sg_memory *mem = q->read_buf->priv; + BUG_ON(!mem); MAGIC_CHECK(mem->magic,MAGIC_SG_MEM); if (vbihack) { @@ -658,7 +677,7 @@ static int __videobuf_copy_stream ( struct videobuf_queue *q, return count; } -static struct videobuf_qtype_ops pci_ops = { +static struct videobuf_qtype_ops sg_ops = { .magic = MAGIC_QTYPE_OPS, .alloc = __videobuf_alloc, @@ -668,23 +687,24 @@ static struct videobuf_qtype_ops pci_ops = { .mmap_mapper = __videobuf_mmap_mapper, .video_copy_to_user = __videobuf_copy_to_user, .copy_stream = __videobuf_copy_stream, + .vmalloc = __videobuf_to_vmalloc, }; -void *videobuf_pci_alloc (size_t size) +void *videobuf_sg_alloc(size_t size) { struct videobuf_queue q; /* Required to make generic handler to call __videobuf_alloc */ - q.int_ops=&pci_ops; + q.int_ops = &sg_ops; - q.msize=size; + q.msize = size; - return videobuf_alloc (&q); + return videobuf_alloc(&q); } -void videobuf_queue_pci_init(struct videobuf_queue* q, +void videobuf_queue_sg_init(struct videobuf_queue* q, struct videobuf_queue_ops *ops, - void *dev, + struct device *dev, spinlock_t *irqlock, enum v4l2_buf_type type, enum v4l2_field field, @@ -692,7 +712,7 @@ void videobuf_queue_pci_init(struct videobuf_queue* q, void *priv) { videobuf_queue_core_init(q, ops, dev, irqlock, type, field, msize, - priv, &pci_ops); + priv, &sg_ops); } /* --------------------------------------------------------------------- */ @@ -709,11 +729,11 @@ EXPORT_SYMBOL_GPL(videobuf_dma_sync); EXPORT_SYMBOL_GPL(videobuf_dma_unmap); EXPORT_SYMBOL_GPL(videobuf_dma_free); -EXPORT_SYMBOL_GPL(videobuf_pci_dma_map); -EXPORT_SYMBOL_GPL(videobuf_pci_dma_unmap); -EXPORT_SYMBOL_GPL(videobuf_pci_alloc); +EXPORT_SYMBOL_GPL(videobuf_sg_dma_map); +EXPORT_SYMBOL_GPL(videobuf_sg_dma_unmap); +EXPORT_SYMBOL_GPL(videobuf_sg_alloc); -EXPORT_SYMBOL_GPL(videobuf_queue_pci_init); +EXPORT_SYMBOL_GPL(videobuf_queue_sg_init); /* * Local variables: diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c index b73aba65d21..6e4d73ec685 100644 --- a/drivers/media/video/videobuf-dvb.c +++ b/drivers/media/video/videobuf-dvb.c @@ -20,9 +20,10 @@ #include <linux/fs.h> #include <linux/kthread.h> #include <linux/file.h> + #include <linux/freezer.h> -#include <media/videobuf-dma-sg.h> +#include <media/videobuf-core.h> #include <media/videobuf-dvb.h> /* ------------------------------------------------------------------ */ @@ -30,7 +31,7 @@ MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); -static unsigned int debug = 0; +static unsigned int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug,"enable debug messages"); @@ -45,7 +46,7 @@ static int videobuf_dvb_thread(void *data) struct videobuf_buffer *buf; unsigned long flags; int err; - struct videobuf_dmabuf *dma; + void *outp; dprintk("dvb thread started\n"); set_freezable(); @@ -66,9 +67,10 @@ static int videobuf_dvb_thread(void *data) try_to_freeze(); /* feed buffer data to demux */ - dma=videobuf_to_dma(buf); + outp = videobuf_queue_to_vmalloc (&dvb->dvbq, buf); + if (buf->state == VIDEOBUF_DONE) - dvb_dmx_swfilter(&dvb->demux, dma->vmalloc, + dvb_dmx_swfilter(&dvb->demux, outp, buf->size); /* requeue buffer */ @@ -138,14 +140,16 @@ static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed) int videobuf_dvb_register(struct videobuf_dvb *dvb, struct module *module, void *adapter_priv, - struct device *device) + struct device *device, + short *adapter_nr) { int result; mutex_init(&dvb->lock); /* register adapter */ - result = dvb_register_adapter(&dvb->adapter, dvb->name, module, device); + result = dvb_register_adapter(&dvb->adapter, dvb->name, module, device, + adapter_nr); if (result < 0) { printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n", dvb->name, result); diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c index 5266ecc91da..c91e1d8e380 100644 --- a/drivers/media/video/videobuf-vmalloc.c +++ b/drivers/media/video/videobuf-vmalloc.c @@ -33,7 +33,7 @@ #define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \ { printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); } -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_DESCRIPTION("helper module to manage video4linux vmalloc buffers"); @@ -57,20 +57,26 @@ videobuf_vm_open(struct vm_area_struct *vma) map->count++; } -static void -videobuf_vm_close(struct vm_area_struct *vma) +static void videobuf_vm_close(struct vm_area_struct *vma) { struct videobuf_mapping *map = vma->vm_private_data; struct videobuf_queue *q = map->q; int i; - dprintk(2,"vm_close %p [count=%u,vma=%08lx-%08lx]\n",map, - map->count,vma->vm_start,vma->vm_end); + dprintk(2,"vm_close %p [count=%u,vma=%08lx-%08lx]\n", map, + map->count, vma->vm_start, vma->vm_end); map->count--; if (0 == map->count) { - dprintk(1,"munmap %p q=%p\n",map,q); + struct videobuf_vmalloc_memory *mem; + + dprintk(1, "munmap %p q=%p\n", map, q); mutex_lock(&q->vb_lock); + + /* We need first to cancel streams, before unmapping */ + if (q->streaming) + videobuf_queue_cancel(q); + for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; @@ -78,14 +84,35 @@ videobuf_vm_close(struct vm_area_struct *vma) if (q->bufs[i]->map != map) continue; - q->ops->buf_release(q,q->bufs[i]); + mem = q->bufs[i]->priv; + if (mem) { + /* This callback is called only if kernel has + allocated memory and this memory is mmapped. + In this case, memory should be freed, + in order to do memory unmap. + */ + + MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM); + + /* vfree is not atomic - can't be + called with IRQ's disabled + */ + dprintk(1, "%s: buf[%d] freeing (%p)\n", + __func__, i, mem->vmalloc); + + vfree(mem->vmalloc); + mem->vmalloc = NULL; + } q->bufs[i]->map = NULL; q->bufs[i]->baddr = 0; } - mutex_unlock(&q->vb_lock); + kfree(map); + + mutex_unlock(&q->vb_lock); } + return; } @@ -102,7 +129,7 @@ static struct vm_operations_struct videobuf_vm_ops = /* Allocated area consists on 3 parts: struct video_buffer struct <driver>_buffer (cx88_buffer, saa7134_buf, ...) - struct videobuf_pci_sg_memory + struct videobuf_dma_sg_memory */ static void *__videobuf_alloc(size_t size) @@ -116,7 +143,7 @@ static void *__videobuf_alloc(size_t size) mem->magic=MAGIC_VMAL_MEM; dprintk(1,"%s: allocated at %p(%ld+%ld) & %p(%ld)\n", - __FUNCTION__,vb,(long)sizeof(*vb),(long)size-sizeof(*vb), + __func__,vb,(long)sizeof(*vb),(long)size-sizeof(*vb), mem,(long)sizeof(*mem)); return vb; @@ -126,45 +153,74 @@ static int __videobuf_iolock (struct videobuf_queue* q, struct videobuf_buffer *vb, struct v4l2_framebuffer *fbuf) { + struct videobuf_vmalloc_memory *mem = vb->priv; int pages; - struct videobuf_vmalloc_memory *mem=vb->priv; BUG_ON(!mem); - MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM); + MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM); - pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT; + switch (vb->memory) { + case V4L2_MEMORY_MMAP: + dprintk(1, "%s memory method MMAP\n", __func__); - /* Currently, doesn't support V4L2_MEMORY_OVERLAY */ - if ((vb->memory != V4L2_MEMORY_MMAP) && - (vb->memory != V4L2_MEMORY_USERPTR) ) { - printk(KERN_ERR "Method currently unsupported.\n"); - return -EINVAL; - } + /* All handling should be done by __videobuf_mmap_mapper() */ + if (!mem->vmalloc) { + printk(KERN_ERR "memory is not alloced/mmapped.\n"); + return -EINVAL; + } + break; + case V4L2_MEMORY_USERPTR: + pages = PAGE_ALIGN(vb->size); - /* FIXME: should be tested with kernel mmap mem */ - mem->vmalloc=vmalloc_user (PAGE_ALIGN(vb->size)); - if (NULL == mem->vmalloc) { - printk(KERN_ERR "vmalloc (%d pages) failed\n",pages); - return -ENOMEM; - } + dprintk(1, "%s memory method USERPTR\n", __func__); - dprintk(1,"vmalloc is at addr 0x%08lx, size=%d\n", - (unsigned long)mem->vmalloc, - pages << PAGE_SHIFT); +#if 1 + if (vb->baddr) { + printk(KERN_ERR "USERPTR is currently not supported\n"); + return -EINVAL; + } +#endif - /* It seems that some kernel versions need to do remap *after* - the mmap() call - */ - if (mem->vma) { - int retval=remap_vmalloc_range(mem->vma, mem->vmalloc,0); - kfree(mem->vma); - mem->vma=NULL; - if (retval<0) { - dprintk(1,"mmap app bug: remap_vmalloc_range area %p error %d\n", - mem->vmalloc,retval); - return retval; + /* The only USERPTR currently supported is the one needed for + read() method. + */ + + mem->vmalloc = vmalloc_user(pages); + if (!mem->vmalloc) { + printk(KERN_ERR "vmalloc (%d pages) failed\n", pages); + return -ENOMEM; + } + dprintk(1, "vmalloc is at addr %p (%d pages)\n", + mem->vmalloc, pages); + +#if 0 + int rc; + /* Kernel userptr is used also by read() method. In this case, + there's no need to remap, since data will be copied to user + */ + if (!vb->baddr) + return 0; + + /* FIXME: to properly support USERPTR, remap should occur. + The code bellow won't work, since mem->vma = NULL + */ + /* Try to remap memory */ + rc = remap_vmalloc_range(mem->vma, (void *)vb->baddr, 0); + if (rc < 0) { + printk(KERN_ERR "mmap: remap failed with error %d. ", rc); + return -ENOMEM; } +#endif + + break; + case V4L2_MEMORY_OVERLAY: + default: + dprintk(1, "%s memory method OVERLAY/unknown\n", __func__); + + /* Currently, doesn't support V4L2_MEMORY_OVERLAY */ + printk(KERN_ERR "Memory method currently unsupported.\n"); + return -EINVAL; } return 0; @@ -180,6 +236,7 @@ static int __videobuf_mmap_free(struct videobuf_queue *q) { unsigned int i; + dprintk(1, "%s\n", __func__); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (q->bufs[i]) { if (q->bufs[i]->map) @@ -196,10 +253,11 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, struct videobuf_vmalloc_memory *mem; struct videobuf_mapping *map; unsigned int first; - int retval; + int retval, pages; unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - if (! (vma->vm_flags & VM_WRITE) || ! (vma->vm_flags & VM_SHARED)) + dprintk(1, "%s\n", __func__); + if (!(vma->vm_flags & VM_WRITE) || !(vma->vm_flags & VM_SHARED)) return -EINVAL; /* look for first buffer to map */ @@ -219,46 +277,55 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, } /* create mapping + update buffer list */ - map = q->bufs[first]->map = kzalloc(sizeof(struct videobuf_mapping),GFP_KERNEL); + map = kzalloc(sizeof(struct videobuf_mapping), GFP_KERNEL); if (NULL == map) return -ENOMEM; + q->bufs[first]->map = map; map->start = vma->vm_start; map->end = vma->vm_end; map->q = q; q->bufs[first]->baddr = vma->vm_start; - vma->vm_ops = &videobuf_vm_ops; - vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED; - vma->vm_private_data = map; + mem = q->bufs[first]->priv; + BUG_ON(!mem); + MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM); - mem=q->bufs[first]->priv; - BUG_ON (!mem); - MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM); + pages = PAGE_ALIGN(vma->vm_end - vma->vm_start); + mem->vmalloc = vmalloc_user(pages); + if (!mem->vmalloc) { + printk(KERN_ERR "vmalloc (%d pages) failed\n", pages); + goto error; + } + dprintk(1, "vmalloc is at addr %p (%d pages)\n", + mem->vmalloc, pages); /* Try to remap memory */ - retval=remap_vmalloc_range(vma, mem->vmalloc,0); - if (retval<0) { - dprintk(1,"mmap: postponing remap_vmalloc_range\n"); - - mem->vma=kmalloc(sizeof(*vma),GFP_KERNEL); - if (!mem->vma) { - kfree(map); - q->bufs[first]->map=NULL; - return -ENOMEM; - } - memcpy(mem->vma,vma,sizeof(*vma)); + retval = remap_vmalloc_range(vma, mem->vmalloc, 0); + if (retval < 0) { + printk(KERN_ERR "mmap: remap failed with error %d. ", retval); + vfree(mem->vmalloc); + goto error; } + vma->vm_ops = &videobuf_vm_ops; + vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED; + vma->vm_private_data = map; + dprintk(1,"mmap %p: q=%p %08lx-%08lx (%lx) pgoff %08lx buf %d\n", - map,q,vma->vm_start,vma->vm_end, + map, q, vma->vm_start, vma->vm_end, (long int) q->bufs[first]->bsize, - vma->vm_pgoff,first); + vma->vm_pgoff, first); videobuf_vm_open(vma); - return (0); + return 0; + +error: + mem = NULL; + kfree(map); + return -ENOMEM; } static int __videobuf_copy_to_user ( struct videobuf_queue *q, @@ -320,6 +387,7 @@ static struct videobuf_qtype_ops qops = { .mmap_mapper = __videobuf_mmap_mapper, .video_copy_to_user = __videobuf_copy_to_user, .copy_stream = __videobuf_copy_stream, + .vmalloc = videobuf_to_vmalloc, }; void videobuf_queue_vmalloc_init(struct videobuf_queue* q, @@ -349,13 +417,24 @@ EXPORT_SYMBOL_GPL(videobuf_to_vmalloc); void videobuf_vmalloc_free (struct videobuf_buffer *buf) { - struct videobuf_vmalloc_memory *mem=buf->priv; - BUG_ON (!mem); + struct videobuf_vmalloc_memory *mem = buf->priv; - MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM); + /* mmapped memory can't be freed here, otherwise mmapped region + would be released, while still needed. In this case, the memory + release should happen inside videobuf_vm_close(). + So, it should free memory only if the memory were allocated for + read() operation. + */ + if ((buf->memory != V4L2_MEMORY_USERPTR) || (buf->baddr == 0)) + return; + + if (!mem) + return; + + MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM); vfree(mem->vmalloc); - mem->vmalloc=NULL; + mem->vmalloc = NULL; return; } diff --git a/drivers/media/video/videocodec.c b/drivers/media/video/videocodec.c index 87951ec8254..cf24956f320 100644 --- a/drivers/media/video/videocodec.c +++ b/drivers/media/video/videocodec.c @@ -39,12 +39,13 @@ #ifdef CONFIG_PROC_FS #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <asm/uaccess.h> #endif #include "videocodec.h" -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-4)"); @@ -320,56 +321,22 @@ videocodec_unregister (const struct videocodec *codec) } #ifdef CONFIG_PROC_FS -/* ============ */ -/* procfs stuff */ -/* ============ */ - -static char *videocodec_buf = NULL; -static int videocodec_bufsize = 0; - -static int -videocodec_build_table (void) +static int proc_videocodecs_show(struct seq_file *m, void *v) { struct codec_list *h = codeclist_top; struct attached_list *a; - int i = 0, size; - - // sum up amount of slaves plus their attached masters - while (h) { - i += h->attached + 1; - h = h->next; - } -#define LINESIZE 100 - size = LINESIZE * (i + 1); - dprintk(3, "videocodec_build table: %d entries, %d bytes\n", i, - size); - - kfree(videocodec_buf); - videocodec_buf = kmalloc(size, GFP_KERNEL); - - if (!videocodec_buf) - return 0; - - i = 0; - i += scnprintf(videocodec_buf + i, size - 1, - "<S>lave or attached <M>aster name type flags magic "); - i += scnprintf(videocodec_buf + i, size -i - 1, "(connected as)\n"); + seq_printf(m, "<S>lave or attached <M>aster name type flags magic "); + seq_printf(m, "(connected as)\n"); h = codeclist_top; while (h) { - if (i > (size - LINESIZE)) - break; // security check - i += scnprintf(videocodec_buf + i, size -i -1, - "S %32s %04x %08lx %08lx (TEMPLATE)\n", + seq_printf(m, "S %32s %04x %08lx %08lx (TEMPLATE)\n", h->codec->name, h->codec->type, h->codec->flags, h->codec->magic); a = h->list; while (a) { - if (i > (size - LINESIZE)) - break; // security check - i += scnprintf(videocodec_buf + i, size -i -1, - "M %32s %04x %08lx %08lx (%s)\n", + seq_printf(m, "M %32s %04x %08lx %08lx (%s)\n", a->codec->master_data->name, a->codec->master_data->type, a->codec->master_data->flags, @@ -380,54 +347,21 @@ videocodec_build_table (void) h = h->next; } - return i; + return 0; } -//The definition: -//typedef int (read_proc_t)(char *page, char **start, off_t off, -// int count, int *eof, void *data); - -static int -videocodec_info (char *buffer, - char **buffer_location, - off_t offset, - int buffer_length, - int *eof, - void *data) +static int proc_videocodecs_open(struct inode *inode, struct file *file) { - int size; - - dprintk(3, "videocodec_info: offset: %ld, len %d / size %d\n", - offset, buffer_length, videocodec_bufsize); - - if (offset == 0) { - videocodec_bufsize = videocodec_build_table(); - } - if ((offset < 0) || (offset >= videocodec_bufsize)) { - dprintk(4, - "videocodec_info: call delivers no result, return 0\n"); - *eof = 1; - return 0; - } - - if (buffer_length < (videocodec_bufsize - offset)) { - dprintk(4, "videocodec_info: %ld needed, %d got\n", - videocodec_bufsize - offset, buffer_length); - size = buffer_length; - } else { - dprintk(4, "videocodec_info: last reading of %ld bytes\n", - videocodec_bufsize - offset); - size = videocodec_bufsize - offset; - *eof = 1; - } - - memcpy(buffer, videocodec_buf + offset, size); - /* doesn't work... */ - /* copy_to_user(buffer, videocodec_buf+offset, size); */ - /* *buffer_location = videocodec_buf+offset; */ - - return size; + return single_open(file, proc_videocodecs_show, NULL); } + +static const struct file_operations videocodecs_proc_fops = { + .owner = THIS_MODULE, + .open = proc_videocodecs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif /* ===================== */ @@ -444,16 +378,8 @@ videocodec_init (void) VIDEOCODEC_VERSION); #ifdef CONFIG_PROC_FS - videocodec_buf = NULL; - videocodec_bufsize = 0; - - videocodec_proc_entry = create_proc_entry("videocodecs", 0, NULL); - if (videocodec_proc_entry) { - videocodec_proc_entry->read_proc = videocodec_info; - videocodec_proc_entry->write_proc = NULL; - videocodec_proc_entry->data = NULL; - videocodec_proc_entry->owner = THIS_MODULE; - } else { + videocodec_proc_entry = proc_create("videocodecs", 0, NULL, &videocodecs_proc_fops); + if (!videocodec_proc_entry) { dprintk(1, KERN_ERR "videocodec: can't init procfs.\n"); } #endif @@ -465,7 +391,6 @@ videocodec_exit (void) { #ifdef CONFIG_PROC_FS remove_proc_entry("videocodecs", NULL); - kfree(videocodec_buf); #endif } diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 0d9b63762a4..67a661cf521 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -18,14 +18,14 @@ #define dbgarg(cmd, fmt, arg...) \ if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) { \ - printk (KERN_DEBUG "%s: ", vfd->name); \ + printk(KERN_DEBUG "%s: ", vfd->name); \ v4l_printk_ioctl(cmd); \ - printk (KERN_DEBUG "%s: " fmt, vfd->name, ## arg); \ + printk(" " fmt, ## arg); \ } #define dbgarg2(fmt, arg...) \ if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) \ - printk (KERN_DEBUG "%s: " fmt, vfd->name, ## arg); + printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg); #include <linux/module.h> #include <linux/types.h> @@ -51,12 +51,51 @@ #define VIDEO_NUM_DEVICES 256 #define VIDEO_NAME "video4linux" +struct std_descr { + v4l2_std_id std; + const char *descr; +}; + +static const struct std_descr standards[] = { + { V4L2_STD_NTSC, "NTSC" }, + { V4L2_STD_NTSC_M, "NTSC-M" }, + { V4L2_STD_NTSC_M_JP, "NTSC-M-JP" }, + { V4L2_STD_NTSC_M_KR, "NTSC-M-KR" }, + { V4L2_STD_NTSC_443, "NTSC-443" }, + { V4L2_STD_PAL, "PAL" }, + { V4L2_STD_PAL_BG, "PAL-BG" }, + { V4L2_STD_PAL_B, "PAL-B" }, + { V4L2_STD_PAL_B1, "PAL-B1" }, + { V4L2_STD_PAL_G, "PAL-G" }, + { V4L2_STD_PAL_H, "PAL-H" }, + { V4L2_STD_PAL_I, "PAL-I" }, + { V4L2_STD_PAL_DK, "PAL-DK" }, + { V4L2_STD_PAL_D, "PAL-D" }, + { V4L2_STD_PAL_D1, "PAL-D1" }, + { V4L2_STD_PAL_K, "PAL-K" }, + { V4L2_STD_PAL_M, "PAL-M" }, + { V4L2_STD_PAL_N, "PAL-N" }, + { V4L2_STD_PAL_Nc, "PAL-Nc" }, + { V4L2_STD_PAL_60, "PAL-60" }, + { V4L2_STD_SECAM, "SECAM" }, + { V4L2_STD_SECAM_B, "SECAM-B" }, + { V4L2_STD_SECAM_G, "SECAM-G" }, + { V4L2_STD_SECAM_H, "SECAM-H" }, + { V4L2_STD_SECAM_DK, "SECAM-DK" }, + { V4L2_STD_SECAM_D, "SECAM-D" }, + { V4L2_STD_SECAM_K, "SECAM-K" }, + { V4L2_STD_SECAM_K1, "SECAM-K1" }, + { V4L2_STD_SECAM_L, "SECAM-L" }, + { V4L2_STD_SECAM_LC, "SECAM-Lc" }, + { 0, "Unknown" } +}; + /* video4linux standard ID conversion to standard name */ -char *v4l2_norm_to_name(v4l2_std_id id) +const char *v4l2_norm_to_name(v4l2_std_id id) { - char *name; u32 myid = id; + int i; /* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle 64 bit comparations. So, on that architecture, with some gcc @@ -64,110 +103,17 @@ char *v4l2_norm_to_name(v4l2_std_id id) */ BUG_ON(myid != id); - switch (myid) { - case V4L2_STD_PAL: - name = "PAL"; - break; - case V4L2_STD_PAL_BG: - name = "PAL-BG"; - break; - case V4L2_STD_PAL_DK: - name = "PAL-DK"; - break; - case V4L2_STD_PAL_B: - name = "PAL-B"; - break; - case V4L2_STD_PAL_B1: - name = "PAL-B1"; - break; - case V4L2_STD_PAL_G: - name = "PAL-G"; - break; - case V4L2_STD_PAL_H: - name = "PAL-H"; - break; - case V4L2_STD_PAL_I: - name = "PAL-I"; - break; - case V4L2_STD_PAL_D: - name = "PAL-D"; - break; - case V4L2_STD_PAL_D1: - name = "PAL-D1"; - break; - case V4L2_STD_PAL_K: - name = "PAL-K"; - break; - case V4L2_STD_PAL_M: - name = "PAL-M"; - break; - case V4L2_STD_PAL_N: - name = "PAL-N"; - break; - case V4L2_STD_PAL_Nc: - name = "PAL-Nc"; - break; - case V4L2_STD_PAL_60: - name = "PAL-60"; - break; - case V4L2_STD_NTSC: - name = "NTSC"; - break; - case V4L2_STD_NTSC_M: - name = "NTSC-M"; - break; - case V4L2_STD_NTSC_M_JP: - name = "NTSC-M-JP"; - break; - case V4L2_STD_NTSC_443: - name = "NTSC-443"; - break; - case V4L2_STD_NTSC_M_KR: - name = "NTSC-M-KR"; - break; - case V4L2_STD_SECAM: - name = "SECAM"; - break; - case V4L2_STD_SECAM_DK: - name = "SECAM-DK"; - break; - case V4L2_STD_SECAM_B: - name = "SECAM-B"; - break; - case V4L2_STD_SECAM_D: - name = "SECAM-D"; - break; - case V4L2_STD_SECAM_G: - name = "SECAM-G"; - break; - case V4L2_STD_SECAM_H: - name = "SECAM-H"; - break; - case V4L2_STD_SECAM_K: - name = "SECAM-K"; - break; - case V4L2_STD_SECAM_K1: - name = "SECAM-K1"; - break; - case V4L2_STD_SECAM_L: - name = "SECAM-L"; - break; - case V4L2_STD_SECAM_LC: - name = "SECAM-LC"; - break; - default: - name = "Unknown"; - break; - } - - return name; + for (i = 0; standards[i].std; i++) + if (myid == standards[i].std) + break; + return standards[i].descr; } EXPORT_SYMBOL(v4l2_norm_to_name); /* Fill in the fields of a v4l2_standard structure according to the 'id' and 'transmission' parameters. Returns negative on error. */ int v4l2_video_std_construct(struct v4l2_standard *vs, - int id, char *name) + int id, const char *name) { u32 index = vs->index; @@ -378,38 +324,45 @@ static const char *v4l2_int_ioctls[] = { external ioctl messages as well as internal V4L ioctl */ void v4l_printk_ioctl(unsigned int cmd) { - char *dir; + char *dir, *type; - switch (_IOC_DIR(cmd)) { - case _IOC_NONE: dir = "--"; break; - case _IOC_READ: dir = "r-"; break; - case _IOC_WRITE: dir = "-w"; break; - case _IOC_READ | _IOC_WRITE: dir = "rw"; break; - default: dir = "*ERR*"; break; - } switch (_IOC_TYPE(cmd)) { case 'd': - printk("v4l2_int ioctl %s, dir=%s (0x%08x)\n", - (_IOC_NR(cmd) < V4L2_INT_IOCTLS) ? - v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd); - break; + if (_IOC_NR(cmd) >= V4L2_INT_IOCTLS) { + type = "v4l2_int"; + break; + } + printk("%s", v4l2_int_ioctls[_IOC_NR(cmd)]); + return; #ifdef CONFIG_VIDEO_V4L1_COMPAT case 'v': - printk("v4l1 ioctl %s, dir=%s (0x%08x)\n", - (_IOC_NR(cmd) < V4L1_IOCTLS) ? - v4l1_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd); - break; + if (_IOC_NR(cmd) >= V4L1_IOCTLS) { + type = "v4l1"; + break; + } + printk("%s", v4l1_ioctls[_IOC_NR(cmd)]); + return; #endif case 'V': - printk("v4l2 ioctl %s, dir=%s (0x%08x)\n", - (_IOC_NR(cmd) < V4L2_IOCTLS) ? - v4l2_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd); - break; - + if (_IOC_NR(cmd) >= V4L2_IOCTLS) { + type = "v4l2"; + break; + } + printk("%s", v4l2_ioctls[_IOC_NR(cmd)]); + return; default: - printk("unknown ioctl '%c', dir=%s, #%d (0x%08x)\n", - _IOC_TYPE(cmd), dir, _IOC_NR(cmd), cmd); + type = "unknown"; } + + switch (_IOC_DIR(cmd)) { + case _IOC_NONE: dir = "--"; break; + case _IOC_READ: dir = "r-"; break; + case _IOC_WRITE: dir = "-w"; break; + case _IOC_READ | _IOC_WRITE: dir = "rw"; break; + default: dir = "*ERR*"; break; + } + printk("%s ioctl '%c', dir=%s, #%d (0x%08x)", + type, _IOC_TYPE(cmd), dir, _IOC_NR(cmd), cmd); } EXPORT_SYMBOL(v4l_printk_ioctl); @@ -774,6 +727,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, if ( (vfd->debug & V4L2_DEBUG_IOCTL) && !(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) { v4l_print_ioctl(vfd->name, cmd); + printk("\n"); } #ifdef CONFIG_VIDEO_V4L1_COMPAT @@ -1210,95 +1164,40 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_ENUMSTD: { struct v4l2_standard *p = arg; - v4l2_std_id id = vfd->tvnorms,curr_id=0; - unsigned int index = p->index,i; - - if (index<0) { - ret=-EINVAL; - break; - } - - /* Return norm array on a canonical way */ - for (i=0;i<= index && id; i++) { - if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) { - curr_id = V4L2_STD_PAL; - } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) { - curr_id = V4L2_STD_PAL_BG; - } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) { - curr_id = V4L2_STD_PAL_DK; - } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) { - curr_id = V4L2_STD_PAL_B; - } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) { - curr_id = V4L2_STD_PAL_B1; - } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) { - curr_id = V4L2_STD_PAL_G; - } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) { - curr_id = V4L2_STD_PAL_H; - } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) { - curr_id = V4L2_STD_PAL_I; - } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) { - curr_id = V4L2_STD_PAL_D; - } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) { - curr_id = V4L2_STD_PAL_D1; - } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) { - curr_id = V4L2_STD_PAL_K; - } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) { - curr_id = V4L2_STD_PAL_M; - } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) { - curr_id = V4L2_STD_PAL_N; - } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) { - curr_id = V4L2_STD_PAL_Nc; - } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) { - curr_id = V4L2_STD_PAL_60; - } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) { - curr_id = V4L2_STD_NTSC; - } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) { - curr_id = V4L2_STD_NTSC_M; - } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) { - curr_id = V4L2_STD_NTSC_M_JP; - } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) { - curr_id = V4L2_STD_NTSC_443; - } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) { - curr_id = V4L2_STD_NTSC_M_KR; - } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) { - curr_id = V4L2_STD_SECAM; - } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) { - curr_id = V4L2_STD_SECAM_DK; - } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) { - curr_id = V4L2_STD_SECAM_B; - } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) { - curr_id = V4L2_STD_SECAM_D; - } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) { - curr_id = V4L2_STD_SECAM_G; - } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) { - curr_id = V4L2_STD_SECAM_H; - } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) { - curr_id = V4L2_STD_SECAM_K; - } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) { - curr_id = V4L2_STD_SECAM_K1; - } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) { - curr_id = V4L2_STD_SECAM_L; - } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) { - curr_id = V4L2_STD_SECAM_LC; - } else { + v4l2_std_id id = vfd->tvnorms, curr_id = 0; + unsigned int index = p->index, i, j = 0; + const char *descr = ""; + + /* Return norm array in a canonical way */ + for (i = 0; i <= index && id; i++) { + /* last std value in the standards array is 0, so this + while always ends there since (id & 0) == 0. */ + while ((id & standards[j].std) != standards[j].std) + j++; + curr_id = standards[j].std; + descr = standards[j].descr; + j++; + if (curr_id == 0) break; - } - id &= ~curr_id; + if (curr_id != V4L2_STD_PAL && + curr_id != V4L2_STD_SECAM && + curr_id != V4L2_STD_NTSC) + id &= ~curr_id; } - if (i<=index) + if (i <= index) return -EINVAL; - v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id)); + v4l2_video_std_construct(p, curr_id, descr); p->index = index; - dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, " + dbgarg(cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, " "framelines=%d\n", p->index, (unsigned long long)p->id, p->name, p->frameperiod.numerator, p->frameperiod.denominator, p->framelines); - ret=0; + ret = 0; break; } case VIDIOC_G_STD: @@ -1853,12 +1752,20 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, dbgarg (cmd, "chip_ident=%u, revision=0x%x\n", p->ident, p->revision); break; } + default: + { + if (!vfd->vidioc_default) + break; + ret = vfd->vidioc_default(file, fh, cmd, arg); + break; + } } /* switch */ if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) { if (ret<0) { - printk ("%s: err:\n", vfd->name); + printk("%s: err: on ", vfd->name); v4l_print_ioctl(vfd->name, cmd); + printk("\n"); } } @@ -2019,7 +1926,7 @@ int video_register_device(struct video_device *vfd, int type, int nr) break; default: printk(KERN_ERR "%s called with unknown type: %d\n", - __FUNCTION__, type); + __func__, type); return -1; } @@ -2057,7 +1964,7 @@ int video_register_device(struct video_device *vfd, int type, int nr) ret = device_register(&vfd->class_dev); if (ret < 0) { printk(KERN_ERR "%s: device_register failed\n", - __FUNCTION__); + __func__); goto fail_minor; } diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 5bb75294b5a..01ea99c9bc1 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -13,7 +13,7 @@ /* * TODO: * - remove "mark pages reserved-hacks" from memory allocation code - * and implement nopage() + * and implement fault() * - check decimation, calculating and reporting image size when * using decimation * - implement read(), user mode buffers and overlay (?) @@ -333,7 +333,7 @@ struct vino_settings { * * Use non-zero value to enable conversion. */ -static int vino_pixel_conversion = 0; +static int vino_pixel_conversion; module_param_named(pixelconv, vino_pixel_conversion, int, 0); @@ -4370,8 +4370,8 @@ static int vino_ioctl(struct inode *inode, struct file *file, /* Initialization and cleanup */ -// __initdata -static int vino_init_stage = 0; +/* __initdata */ +static int vino_init_stage; static const struct file_operations vino_fops = { .owner = THIS_MODULE, @@ -4385,8 +4385,8 @@ static const struct file_operations vino_fops = { static struct video_device v4l_device_template = { .name = "NOT SET", - //.type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE | - // VID_TYPE_CLIPPING | VID_TYPE_SCALES, VID_TYPE_OVERLAY + /*.type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE | */ + /* VID_TYPE_CLIPPING | VID_TYPE_SCALES, VID_TYPE_OVERLAY */ .fops = &vino_fops, .minor = -1, }; diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 1db067c0281..5ff9a58b613 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -146,8 +146,6 @@ struct vivi_buffer { struct vivi_dmaqueue { struct list_head active; - struct list_head queued; - struct timer_list timeout; /* thread for generating video stream*/ struct task_struct *kthread; @@ -162,8 +160,8 @@ static LIST_HEAD(vivi_devlist); struct vivi_dev { struct list_head vivi_devlist; - struct mutex lock; spinlock_t slock; + struct mutex mutex; int users; @@ -322,24 +320,27 @@ static void gen_line(char *basep, int inipos, int wmax, end: return; } + static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) { int h , pos = 0; int hmax = buf->vb.height; int wmax = buf->vb.width; struct timeval ts; - char *tmpbuf = kmalloc(wmax * 2, GFP_KERNEL); + char *tmpbuf; void *vbuf = videobuf_to_vmalloc(&buf->vb); + if (!vbuf) + return; + + tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC); if (!tmpbuf) return; for (h = 0; h < hmax; h++) { gen_line(tmpbuf, 0, wmax, hmax, h, dev->mv_count, dev->timestr); - /* FIXME: replacing to __copy_to_user */ - if (copy_to_user(vbuf + pos, tmpbuf, wmax * 2) != 0) - dprintk(dev, 2, "vivifill copy_to_user failed.\n"); + memcpy(vbuf + pos, tmpbuf, wmax * 2); pos += wmax*2; } @@ -372,107 +373,71 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) dev->timestr, (unsigned long)tmpbuf, pos); /* Advice that buffer was filled */ - buf->vb.state = VIDEOBUF_DONE; buf->vb.field_count++; do_gettimeofday(&ts); buf->vb.ts = ts; - - list_del(&buf->vb.queue); - wake_up(&buf->vb.done); + buf->vb.state = VIDEOBUF_DONE; } -static int restart_video_queue(struct vivi_dmaqueue *dma_q); - -static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) +static void vivi_thread_tick(struct vivi_fh *fh) { - struct vivi_buffer *buf; - struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); + struct vivi_buffer *buf; + struct vivi_dev *dev = fh->dev; + struct vivi_dmaqueue *dma_q = &dev->vidq; - int bc; + unsigned long flags = 0; - spin_lock(&dev->slock); - /* Announces videobuf that all went ok */ - for (bc = 0;; bc++) { - if (list_empty(&dma_q->active)) { - dprintk(dev, 1, "No active queue to serve\n"); - break; - } + dprintk(dev, 1, "Thread tick\n"); - buf = list_entry(dma_q->active.next, - struct vivi_buffer, vb.queue); + spin_lock_irqsave(&dev->slock, flags); + if (list_empty(&dma_q->active)) { + dprintk(dev, 1, "No active queue to serve\n"); + goto unlock; + } - /* Nobody is waiting something to be done, just return */ - if (!waitqueue_active(&buf->vb.done)) { - mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); - spin_unlock(&dev->slock); - return; - } + buf = list_entry(dma_q->active.next, + struct vivi_buffer, vb.queue); + + /* Nobody is waiting on this buffer, return */ + if (!waitqueue_active(&buf->vb.done)) + goto unlock; - do_gettimeofday(&buf->vb.ts); - dprintk(dev, 2, "[%p/%d] wakeup\n", buf, buf->vb. i); + list_del(&buf->vb.queue); - /* Fill buffer */ - vivi_fillbuff(dev, buf); + do_gettimeofday(&buf->vb.ts); - if (list_empty(&dma_q->active)) { - del_timer(&dma_q->timeout); - } else { - mod_timer(&dma_q->timeout, jiffies + BUFFER_TIMEOUT); - } - } - if (bc != 1) - dprintk(dev, 1, "%s: %d buffers handled (should be 1)\n", - __FUNCTION__, bc); - spin_unlock(&dev->slock); + /* Fill buffer */ + vivi_fillbuff(dev, buf); + dprintk(dev, 1, "filled buffer %p\n", buf); + + wake_up(&buf->vb.done); + dprintk(dev, 2, "[%p/%d] wakeup\n", buf, buf->vb. i); +unlock: + spin_unlock_irqrestore(&dev->slock, flags); + return; } #define frames_to_ms(frames) \ ((frames * WAKE_NUMERATOR * 1000) / WAKE_DENOMINATOR) -static void vivi_sleep(struct vivi_dmaqueue *dma_q) +static void vivi_sleep(struct vivi_fh *fh) { - struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); - int timeout, running_time; + struct vivi_dev *dev = fh->dev; + struct vivi_dmaqueue *dma_q = &dev->vidq; + int timeout; DECLARE_WAITQUEUE(wait, current); - dprintk(dev, 1, "%s dma_q=0x%08lx\n", __FUNCTION__, + dprintk(dev, 1, "%s dma_q=0x%08lx\n", __func__, (unsigned long)dma_q); add_wait_queue(&dma_q->wq, &wait); if (kthread_should_stop()) goto stop_task; - running_time = jiffies - dma_q->ini_jiffies; - dma_q->frame++; - /* Calculate time to wake up */ - timeout = msecs_to_jiffies(frames_to_ms(dma_q->frame)) - running_time; - - if (timeout > msecs_to_jiffies(frames_to_ms(2)) || timeout <= 0) { - int old = dma_q->frame; - int nframes; - - dma_q->frame = (jiffies_to_msecs(running_time) / - frames_to_ms(1)) + 1; - - timeout = msecs_to_jiffies(frames_to_ms(dma_q->frame)) - - running_time; - - if (unlikely (timeout <= 0)) - timeout = 1; - - nframes = (dma_q->frame > old)? - dma_q->frame - old : old - dma_q->frame; - - dprintk(dev, 1, "%ld: %s %d frames. " - "Current frame is %d. Will sleep for %d jiffies\n", - jiffies, - (dma_q->frame > old)? "Underrun, losed" : "Overrun of", - nframes, dma_q->frame, timeout); - } else - dprintk(dev, 1, "will sleep for %d jiffies\n", timeout); + timeout = msecs_to_jiffies(frames_to_ms(1)); - vivi_thread_tick(dma_q); + vivi_thread_tick(fh); schedule_timeout_interruptible(timeout); @@ -483,16 +448,15 @@ stop_task: static int vivi_thread(void *data) { - struct vivi_dmaqueue *dma_q = data; - struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); + struct vivi_fh *fh = data; + struct vivi_dev *dev = fh->dev; dprintk(dev, 1, "thread started\n"); - mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); set_freezable(); for (;;) { - vivi_sleep(dma_q); + vivi_sleep(fh); if (kthread_should_stop()) break; @@ -501,16 +465,17 @@ static int vivi_thread(void *data) return 0; } -static int vivi_start_thread(struct vivi_dmaqueue *dma_q) +static int vivi_start_thread(struct vivi_fh *fh) { - struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); + struct vivi_dev *dev = fh->dev; + struct vivi_dmaqueue *dma_q = &dev->vidq; dma_q->frame = 0; dma_q->ini_jiffies = jiffies; - dprintk(dev, 1, "%s\n", __FUNCTION__); + dprintk(dev, 1, "%s\n", __func__); - dma_q->kthread = kthread_run(vivi_thread, dma_q, "vivi"); + dma_q->kthread = kthread_run(vivi_thread, fh, "vivi"); if (IS_ERR(dma_q->kthread)) { printk(KERN_ERR "vivi: kernel_thread() failed\n"); @@ -519,7 +484,7 @@ static int vivi_start_thread(struct vivi_dmaqueue *dma_q) /* Wakes thread */ wake_up_interruptible(&dma_q->wq); - dprintk(dev, 1, "returning from %s\n", __FUNCTION__); + dprintk(dev, 1, "returning from %s\n", __func__); return 0; } @@ -527,7 +492,7 @@ static void vivi_stop_thread(struct vivi_dmaqueue *dma_q) { struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); - dprintk(dev, 1, "%s\n", __FUNCTION__); + dprintk(dev, 1, "%s\n", __func__); /* shutdown control thread */ if (dma_q->kthread) { kthread_stop(dma_q->kthread); @@ -535,91 +500,6 @@ static void vivi_stop_thread(struct vivi_dmaqueue *dma_q) } } -static int restart_video_queue(struct vivi_dmaqueue *dma_q) -{ - struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); - struct vivi_buffer *buf, *prev; - - dprintk(dev, 1, "%s dma_q=0x%08lx\n", __FUNCTION__, - (unsigned long)dma_q); - - if (!list_empty(&dma_q->active)) { - buf = list_entry(dma_q->active.next, - struct vivi_buffer, vb.queue); - dprintk(dev, 2, "restart_queue [%p/%d]: restart dma\n", - buf, buf->vb.i); - - dprintk(dev, 1, "Restarting video dma\n"); - vivi_stop_thread(dma_q); - - /* cancel all outstanding capture / vbi requests */ - list_for_each_entry_safe(buf, prev, &dma_q->active, vb.queue) { - list_del(&buf->vb.queue); - buf->vb.state = VIDEOBUF_ERROR; - wake_up(&buf->vb.done); - } - mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); - - return 0; - } - - prev = NULL; - for (;;) { - if (list_empty(&dma_q->queued)) - return 0; - buf = list_entry(dma_q->queued.next, - struct vivi_buffer, vb.queue); - if (NULL == prev) { - list_del(&buf->vb.queue); - list_add_tail(&buf->vb.queue, &dma_q->active); - - dprintk(dev, 1, "Restarting video dma\n"); - vivi_stop_thread(dma_q); - vivi_start_thread(dma_q); - - buf->vb.state = VIDEOBUF_ACTIVE; - mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(dev, 2, - "[%p/%d] restart_queue - first active\n", - buf, buf->vb.i); - - } else if (prev->vb.width == buf->vb.width && - prev->vb.height == buf->vb.height && - prev->fmt == buf->fmt) { - list_del(&buf->vb.queue); - list_add_tail(&buf->vb.queue, &dma_q->active); - buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(dev, 2, - "[%p/%d] restart_queue - move to active\n", - buf, buf->vb.i); - } else { - return 0; - } - prev = buf; - } -} - -static void vivi_vid_timeout(unsigned long data) -{ - struct vivi_dev *dev = (struct vivi_dev *)data; - struct vivi_dmaqueue *vidq = &dev->vidq; - struct vivi_buffer *buf; - - spin_lock(&dev->slock); - - while (!list_empty(&vidq->active)) { - buf = list_entry(vidq->active.next, - struct vivi_buffer, vb.queue); - list_del(&buf->vb.queue); - buf->vb.state = VIDEOBUF_ERROR; - wake_up(&buf->vb.done); - printk(KERN_INFO "vivi/0: [%p/%d] timeout\n", buf, buf->vb.i); - } - restart_video_queue(vidq); - - spin_unlock(&dev->slock); -} - /* ------------------------------------------------------------------ Videobuf operations ------------------------------------------------------------------*/ @@ -637,7 +517,7 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) while (*size * *count > vid_limit * 1024 * 1024) (*count)--; - dprintk(dev, 1, "%s, count=%d, size=%d\n", __FUNCTION__, + dprintk(dev, 1, "%s, count=%d, size=%d\n", __func__, *count, *size); return 0; @@ -648,13 +528,13 @@ static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf) struct vivi_fh *fh = vq->priv_data; struct vivi_dev *dev = fh->dev; - dprintk(dev, 1, "%s\n", __FUNCTION__); + dprintk(dev, 1, "%s, state: %i\n", __func__, buf->vb.state); if (in_interrupt()) BUG(); - videobuf_waiton(&buf->vb, 0, 0); videobuf_vmalloc_free(&buf->vb); + dprintk(dev, 1, "free_buffer: freed\n"); buf->vb.state = VIDEOBUF_NEEDS_INIT; } @@ -667,28 +547,25 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, struct vivi_fh *fh = vq->priv_data; struct vivi_dev *dev = fh->dev; struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); - int rc, init_buffer = 0; + int rc; - dprintk(dev, 1, "%s, field=%d\n", __FUNCTION__, field); + dprintk(dev, 1, "%s, field=%d\n", __func__, field); BUG_ON(NULL == fh->fmt); + if (fh->width < 48 || fh->width > norm_maxw() || fh->height < 32 || fh->height > norm_maxh()) return -EINVAL; + buf->vb.size = fh->width*fh->height*2; if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) return -EINVAL; - if (buf->fmt != fh->fmt || - buf->vb.width != fh->width || - buf->vb.height != fh->height || - buf->vb.field != field) { - buf->fmt = fh->fmt; - buf->vb.width = fh->width; - buf->vb.height = fh->height; - buf->vb.field = field; - init_buffer = 1; - } + /* These properties only change when queue is idle, see s_fmt */ + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); @@ -711,45 +588,12 @@ buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); struct vivi_fh *fh = vq->priv_data; struct vivi_dev *dev = fh->dev; - struct vivi_dmaqueue *vidq = &dev->vidq; - struct vivi_buffer *prev; - - if (!list_empty(&vidq->queued)) { - dprintk(dev, 1, "adding vb queue=0x%08lx\n", - (unsigned long)&buf->vb.queue); - list_add_tail(&buf->vb.queue, &vidq->queued); - buf->vb.state = VIDEOBUF_QUEUED; - dprintk(dev, 2, "[%p/%d] buffer_queue - append to queued\n", - buf, buf->vb.i); - } else if (list_empty(&vidq->active)) { - list_add_tail(&buf->vb.queue, &vidq->active); - - buf->vb.state = VIDEOBUF_ACTIVE; - mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(dev, 2, "[%p/%d] buffer_queue - first active\n", - buf, buf->vb.i); - - vivi_start_thread(vidq); - } else { - prev = list_entry(vidq->active.prev, - struct vivi_buffer, vb.queue); - if (prev->vb.width == buf->vb.width && - prev->vb.height == buf->vb.height && - prev->fmt == buf->fmt) { - list_add_tail(&buf->vb.queue, &vidq->active); - buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(dev, 2, - "[%p/%d] buffer_queue - append to active\n", - buf, buf->vb.i); - - } else { - list_add_tail(&buf->vb.queue, &vidq->queued); - buf->vb.state = VIDEOBUF_QUEUED; - dprintk(dev, 2, - "[%p/%d] buffer_queue - first queued\n", - buf, buf->vb.i); - } - } + struct vivi_dmaqueue *vidq = &dev->vidq; + + dprintk(dev, 1, "%s\n", __func__); + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &vidq->active); } static void buffer_release(struct videobuf_queue *vq, @@ -758,11 +602,8 @@ static void buffer_release(struct videobuf_queue *vq, struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); struct vivi_fh *fh = vq->priv_data; struct vivi_dev *dev = (struct vivi_dev *)fh->dev; - struct vivi_dmaqueue *vidq = &dev->vidq; - - dprintk(dev, 1, "%s\n", __FUNCTION__); - vivi_stop_thread(vidq); + dprintk(dev, 1, "%s\n", __func__); free_buffer(vq, buf); } @@ -869,17 +710,31 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { struct vivi_fh *fh = priv; + struct videobuf_queue *q = &fh->vb_vidq; + int ret = vidioc_try_fmt_cap(file, fh, f); if (ret < 0) return (ret); + mutex_lock(&q->vb_lock); + + if (videobuf_queue_is_busy(&fh->vb_vidq)) { + dprintk(fh->dev, 1, "%s queue busy\n", __func__); + ret = -EBUSY; + goto out; + } + fh->fmt = &format; fh->width = f->fmt.pix.width; fh->height = f->fmt.pix.height; fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - return (0); + ret = 0; +out: + mutex_unlock(&q->vb_lock); + + return (ret); } static int vidioc_reqbufs(struct file *file, void *priv, @@ -1034,8 +889,9 @@ static int vivi_open(struct inode *inode, struct file *file) { int minor = iminor(inode); struct vivi_dev *dev; - struct vivi_fh *fh; + struct vivi_fh *fh = NULL; int i; + int retval = 0; printk(KERN_DEBUG "vivi: open called (minor=%d)\n", minor); @@ -1045,9 +901,15 @@ static int vivi_open(struct inode *inode, struct file *file) return -ENODEV; found: - /* If more than one user, mutex should be added */ + mutex_lock(&dev->mutex); dev->users++; + if (dev->users > 1) { + dev->users--; + retval = -EBUSY; + goto unlock; + } + dprintk(dev, 1, "open minor=%d type=%s users=%d\n", minor, v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users); @@ -1055,8 +917,13 @@ found: fh = kzalloc(sizeof(*fh), GFP_KERNEL); if (NULL == fh) { dev->users--; - return -ENOMEM; + retval = -ENOMEM; + goto unlock; } +unlock: + mutex_unlock(&dev->mutex); + if (retval) + return retval; file->private_data = fh; fh->dev = dev; @@ -1084,6 +951,8 @@ found: NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED, sizeof(struct vivi_buffer), fh); + vivi_start_thread(fh); + return 0; } @@ -1106,7 +975,7 @@ vivi_poll(struct file *file, struct poll_table_struct *wait) struct vivi_dev *dev = fh->dev; struct videobuf_queue *q = &fh->vb_vidq; - dprintk(dev, 1, "%s\n", __FUNCTION__); + dprintk(dev, 1, "%s\n", __func__); if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) return POLLERR; @@ -1128,7 +997,9 @@ static int vivi_close(struct inode *inode, struct file *file) kfree(fh); + mutex_lock(&dev->mutex); dev->users--; + mutex_unlock(&dev->mutex); dprintk(dev, 1, "close called (minor=%d, users=%d)\n", minor, dev->users); @@ -1182,6 +1053,7 @@ static const struct file_operations vivi_fops = { .read = vivi_read, .poll = vivi_poll, .ioctl = video_ioctl2, /* V4L2 ioctl handler */ + .compat_ioctl = v4l_compat_ioctl32, .mmap = vivi_mmap, .llseek = no_llseek, }; @@ -1236,16 +1108,11 @@ static int __init vivi_init(void) /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); - INIT_LIST_HEAD(&dev->vidq.queued); init_waitqueue_head(&dev->vidq.wq); /* initialize locks */ - mutex_init(&dev->lock); spin_lock_init(&dev->slock); - - dev->vidq.timeout.function = vivi_vid_timeout; - dev->vidq.timeout.data = (unsigned long)dev; - init_timer(&dev->vidq.timeout); + mutex_init(&dev->mutex); vfd = video_device_alloc(); if (NULL == vfd) diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c index 282c81403c9..a1f76ee032e 100644 --- a/drivers/media/video/vp27smpx.c +++ b/drivers/media/video/vp27smpx.c @@ -121,7 +121,8 @@ static int vp27smpx_command(struct i2c_client *client, unsigned cmd, void *arg) * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static int vp27smpx_probe(struct i2c_client *client) +static int vp27smpx_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct vp27smpx_state *state; @@ -129,8 +130,6 @@ static int vp27smpx_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - snprintf(client->name, sizeof(client->name) - 1, "vp27smpx"); - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); @@ -153,11 +152,18 @@ static int vp27smpx_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +static const struct i2c_device_id vp27smpx_id[] = { + { "vp27smpx", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vp27smpx_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "vp27smpx", .driverid = I2C_DRIVERID_VP27SMPX, .command = vp27smpx_command, .probe = vp27smpx_probe, .remove = vp27smpx_remove, + .id_table = vp27smpx_id, }; diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index a9133858e91..35293029da0 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -40,7 +40,7 @@ #define I2C_VPX3220 0x86 #define VPX3220_DEBUG KERN_DEBUG "vpx3220: " -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 08aaae07c7e..33f702698a5 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -61,10 +61,10 @@ #include <media/v4l2-common.h> #include <linux/parport.h> -//#define DEBUG // Undef me for production +/*#define DEBUG*/ /* Undef me for production */ #ifdef DEBUG -#define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __FUNCTION__ , ##a) +#define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a) #else #define DPRINTF(x...) #endif @@ -134,7 +134,7 @@ MODULE_PARM_DESC(pardev, "pardev: where to search for\n\ \tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n\ \tcam 1 to parport3 and search every parport for cam 2 etc..."); -static int parmode = 0; +static int parmode; module_param(parmode, int, 0); MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp"); @@ -188,7 +188,9 @@ static const struct file_operations w9966_fops = { .open = video_exclusive_open, .release = video_exclusive_release, .ioctl = w9966_v4l_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = w9966_v4l_read, .llseek = no_llseek, }; diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index 2ae1430f5f7..840522442d0 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -3461,7 +3461,9 @@ static const struct file_operations w9968cf_fops = { .release = w9968cf_release, .read = w9968cf_read, .ioctl = w9968cf_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .mmap = w9968cf_mmap, .llseek = no_llseek, }; @@ -3481,7 +3483,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) enum w9968cf_model_id mod_id; struct list_head* ptr; u8 sc = 0; /* number of simultaneous cameras */ - static unsigned short dev_nr = 0; /* we are handling device number n */ + static unsigned short dev_nr; /* 0 - we are handling device number n */ if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor && le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct) diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h index ec7696e8f1f..3c95316bc03 100644 --- a/drivers/media/video/w9968cf.h +++ b/drivers/media/video/w9968cf.h @@ -298,7 +298,7 @@ struct w9968cf_device { dev_warn(&cam->dev, fmt "\n", ## args); \ else if ((level) >= 5) \ dev_info(&cam->dev, "[%s:%d] " fmt "\n", \ - __FUNCTION__, __LINE__ , ## args); \ + __func__, __LINE__ , ## args); \ } \ } /* For generic kernel (not device specific) messages */ @@ -309,7 +309,7 @@ struct w9968cf_device { if ((level) >= 1 && (level) <= 4) \ pr_info("w9968cf: " fmt "\n", ## args); \ else if ((level) >= 5) \ - pr_debug("w9968cf: [%s:%d] " fmt "\n", __FUNCTION__, \ + pr_debug("w9968cf: [%s:%d] " fmt "\n", __func__, \ __LINE__ , ## args); \ } \ } @@ -321,7 +321,7 @@ struct w9968cf_device { #undef PDBG #define PDBG(fmt, args...) \ -dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args); +dev_info(&cam->dev, "[%s:%d] " fmt "\n", __func__, __LINE__ , ## args); #undef PDBGG #define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */ diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c index 31795b4f8b6..fc50299caa3 100644 --- a/drivers/media/video/wm8739.c +++ b/drivers/media/video/wm8739.c @@ -261,7 +261,8 @@ static int wm8739_command(struct i2c_client *client, unsigned cmd, void *arg) /* i2c implementation */ -static int wm8739_probe(struct i2c_client *client) +static int wm8739_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct wm8739_state *state; @@ -312,11 +313,18 @@ static int wm8739_remove(struct i2c_client *client) return 0; } +static const struct i2c_device_id wm8739_id[] = { + { "wm8739", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8739_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "wm8739", .driverid = I2C_DRIVERID_WM8739, .command = wm8739_command, .probe = wm8739_probe, .remove = wm8739_remove, + .id_table = wm8739_id, }; diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index 869f9e7946b..506378a508b 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -159,7 +159,8 @@ static int wm8775_command(struct i2c_client *client, unsigned cmd, void *arg) * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static int wm8775_probe(struct i2c_client *client) +static int wm8775_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct wm8775_state *state; @@ -215,11 +216,18 @@ static int wm8775_remove(struct i2c_client *client) return 0; } +static const struct i2c_device_id wm8775_id[] = { + { "wm8775", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8775_id); + static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "wm8775", .driverid = I2C_DRIVERID_WM8775, .command = wm8775_command, .probe = wm8775_probe, .remove = wm8775_remove, + .id_table = wm8775_id, }; diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h index a2de50efa31..7bbab541a30 100644 --- a/drivers/media/video/zc0301/zc0301.h +++ b/drivers/media/video/zc0301/zc0301.h @@ -160,7 +160,7 @@ do { \ dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ else if ((level) >= 3) \ dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \ - __FILE__, __FUNCTION__, __LINE__ , ## args); \ + __FILE__, __func__, __LINE__ , ## args); \ } \ } while (0) # define KDBG(level, fmt, args...) \ @@ -170,7 +170,7 @@ do { \ pr_info("zc0301: " fmt "\n", ## args); \ else if ((level) == 3) \ pr_debug("sn9c102: [%s:%s:%d] " fmt "\n", __FILE__, \ - __FUNCTION__, __LINE__ , ## args); \ + __func__, __LINE__ , ## args); \ } \ } while (0) # define V4LDBG(level, name, cmd) \ @@ -186,7 +186,7 @@ do { \ #undef PDBG #define PDBG(fmt, args...) \ -dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __FUNCTION__, \ +dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__, \ __LINE__ , ## args) #undef PDBGG diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 2c5665c8244..e5c4e9f5193 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -38,7 +38,7 @@ #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/page-flags.h> -#include <linux/byteorder/generic.h> +#include <asm/byteorder.h> #include <asm/page.h> #include <asm/uaccess.h> @@ -1925,7 +1925,9 @@ static const struct file_operations zc0301_fops = { .open = zc0301_open, .release = zc0301_release, .ioctl = zc0301_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .read = zc0301_read, .poll = zc0301_poll, .mmap = zc0301_mmap, @@ -1939,7 +1941,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) { struct usb_device *udev = interface_to_usbdev(intf); struct zc0301_device* cam; - static unsigned int dev_nr = 0; + static unsigned int dev_nr; unsigned int i; int err = 0; diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index 498a43c1f2b..46b7ad477ce 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -243,10 +243,8 @@ struct zoran_format { #ifdef CONFIG_VIDEO_V4L1_COMPAT int palette; #endif -#ifdef CONFIG_VIDEO_V4L2 __u32 fourcc; int colorspace; -#endif int depth; __u32 flags; __u32 vfespfr; @@ -271,20 +269,6 @@ struct zoran_v4l_settings { const struct zoran_format *format; /* capture format */ }; -/* whoops, this one is undeclared if !v4l2 */ -#ifndef CONFIG_VIDEO_V4L2 -struct v4l2_jpegcompression { - int quality; - int APPn; - int APP_len; - char APP_data[60]; - int COM_len; - char COM_data[60]; - __u32 jpeg_markers; - __u8 reserved[116]; -}; -#endif - /* jpg-capture/-playback settings */ struct zoran_jpg_settings { int decimation; /* this bit is used to set everything to default */ @@ -301,7 +285,7 @@ struct zoran_mapping { struct zoran_jpg_buffer { struct zoran_mapping *map; - u32 *frag_tab; /* addresses of frag table */ + __le32 *frag_tab; /* addresses of frag table */ u32 frag_tab_bus; /* same value cached to save time in ISR */ enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */ struct zoran_sync bs; /* DONE: info to return to application */ @@ -466,7 +450,7 @@ struct zoran { unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ /* zr36057's code buffer table */ - u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ + __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ int jpg_pend[BUZ_MAX_FRAME]; diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 690281bb59e..006d48847e2 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -83,7 +83,7 @@ MODULE_PARM_DESC(decoder, "i2c TV decoder"); or set in in a VIDIOCSFBUF ioctl */ -static unsigned long vidmem = 0; /* Video memory base address */ +static unsigned long vidmem; /* default = 0 - Video memory base address */ module_param(vidmem, ulong, 0444); MODULE_PARM_DESC(vidmem, "Default video memory base address"); @@ -91,7 +91,7 @@ MODULE_PARM_DESC(vidmem, "Default video memory base address"); Default input and video norm at startup of the driver. */ -static unsigned int default_input = 0; /* 0=Composite, 1=S-Video */ +static unsigned int default_input; /* default 0 = Composite, 1 = S-Video */ module_param(default_input, uint, 0444); MODULE_PARM_DESC(default_input, "Default input (0=Composite, 1=S-Video, 2=Internal)"); @@ -101,7 +101,7 @@ module_param(default_mux, int, 0644); MODULE_PARM_DESC(default_mux, "Default 6 Eyes mux setting (Input selection)"); -static int default_norm = 0; /* 0=PAL, 1=NTSC 2=SECAM */ +static int default_norm; /* default 0 = PAL, 1 = NTSC 2 = SECAM */ module_param(default_norm, int, 0444); MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h index 8444ca0a5f3..1b5c4171cf9 100644 --- a/drivers/media/video/zoran_card.h +++ b/drivers/media/video/zoran_card.h @@ -50,4 +50,6 @@ extern int zoran_check_jpg_settings(struct zoran *zr, extern void zoran_open_init_params(struct zoran *zr); extern void zoran_vdev_release(struct video_device *vdev); +void zr36016_write(struct videocodec *codec, u16 reg, u32 val); + #endif /* __ZORAN_CARD_H__ */ diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index f97c2069205..88d369708e4 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -31,7 +31,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/vmalloc.h> -#include <linux/byteorder/generic.h> #include <linux/interrupt.h> #include <linux/proc_fs.h> @@ -47,6 +46,7 @@ #include <linux/delay.h> #include <linux/wait.h> +#include <asm/byteorder.h> #include <asm/io.h> #include "videocodec.h" @@ -60,7 +60,8 @@ extern const struct zoran_format zoran_formats[]; -static int lml33dpath = 0; /* 1 will use digital path in capture +static int lml33dpath; /* default = 0 + * 1 will use digital path in capture * mode instead of analog. It can be * used for picture adjustments using * tool like xawtv while watching image @@ -927,11 +928,6 @@ count_reset_interrupt (struct zoran *zr) return isr; } -/* hack */ -extern void zr36016_write (struct videocodec *codec, - u16 reg, - u32 val); - void jpeg_start (struct zoran *zr) { @@ -987,7 +983,7 @@ void zr36057_enable_jpg (struct zoran *zr, enum zoran_codec_mode mode) { - static int zero = 0; + static int zero; static int one = 1; struct vfe_settings cap; int field_size = @@ -1324,7 +1320,7 @@ error_handler (struct zoran *zr, if (i) { /* Rotate stat_comm entries to make current entry first */ int j; - u32 bus_addr[BUZ_NUM_STAT_COM]; + __le32 bus_addr[BUZ_NUM_STAT_COM]; /* Here we are copying the stat_com array, which * is already in little endian format, so @@ -1726,7 +1722,7 @@ decoder_command (struct zoran *zr, return -EIO; if (zr->card.type == LML33 && - (cmd == DECODER_SET_NORM || DECODER_SET_INPUT)) { + (cmd == DECODER_SET_NORM || cmd == DECODER_SET_INPUT)) { int res; // Bt819 needs to reset its FIFO buffer using #FRST pin and diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index dd3d7d2c8b0..5394d7a5cfe 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -52,7 +52,6 @@ #include <linux/pci.h> #include <linux/vmalloc.h> #include <linux/wait.h> -#include <linux/byteorder/generic.h> #include <linux/interrupt.h> #include <linux/i2c.h> @@ -74,6 +73,7 @@ #include <media/v4l2-common.h> #include "videocodec.h" +#include <asm/byteorder.h> #include <asm/io.h> #include <asm/uaccess.h> #include <linux/proc_fs.h> @@ -85,7 +85,6 @@ #include "zoran_device.h" #include "zoran_card.h" -#ifdef CONFIG_VIDEO_V4L2 /* we declare some card type definitions here, they mean * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */ #define ZORAN_V4L2_VID_FLAGS ( \ @@ -94,19 +93,15 @@ V4L2_CAP_VIDEO_OUTPUT |\ V4L2_CAP_VIDEO_OVERLAY \ ) -#endif #include <asm/byteorder.h> -#if defined(CONFIG_VIDEO_V4L2) && defined(CONFIG_VIDEO_V4L1_COMPAT) +#if defined(CONFIG_VIDEO_V4L1_COMPAT) #define ZFMT(pal, fcc, cs) \ .palette = (pal), .fourcc = (fcc), .colorspace = (cs) -#elif defined(CONFIG_VIDEO_V4L2) -#define ZFMT(pal, fcc, cs) \ - .fourcc = (fcc), .colorspace = (cs) #else #define ZFMT(pal, fcc, cs) \ - .palette = (pal) + .fourcc = (fcc), .colorspace = (cs) #endif const struct zoran_format zoran_formats[] = { @@ -205,11 +200,10 @@ extern int jpg_nbufs; extern int jpg_bufsize; extern int pass_through; -static int lock_norm = 0; /* 1=Don't change TV standard (norm) */ +static int lock_norm; /* 0 = default 1 = Don't change TV standard (norm) */ module_param(lock_norm, int, 0644); MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)"); -#ifdef CONFIG_VIDEO_V4L2 /* small helper function for calculating buffersizes for v4l2 * we calculate the nearest higher power-of-two, which * will be the recommended buffersize */ @@ -232,7 +226,6 @@ zoran_v4l2_calc_bufsize (struct zoran_jpg_settings *settings) return 8192; return result; } -#endif /* forward references */ static void v4l_fbuffer_free(struct file *file); @@ -339,7 +332,7 @@ v4l_fbuffer_alloc (struct file *file) /* Use kmalloc */ mem = kmalloc(fh->v4l_buffers.buffer_size, GFP_KERNEL); - if (mem == 0) { + if (!mem) { dprintk(1, KERN_ERR "%s: v4l_fbuffer_alloc() - kmalloc for V4L buf %d failed\n", @@ -502,7 +495,7 @@ jpg_fbuffer_alloc (struct file *file) jpg_fbuffer_free(file); return -ENOBUFS; } - fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem; + fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem; fh->jpg_buffers.buffer[i].frag_tab_bus = virt_to_bus((void *) mem); @@ -1174,7 +1167,7 @@ zoran_close_end_session (struct file *file) /* v4l capture */ if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -1709,7 +1702,6 @@ setup_overlay (struct file *file, return wait_grab_pending(zr); } -#ifdef CONFIG_VIDEO_V4L2 /* get the status of a buffer in the clients buffer queue */ static int zoran_v4l2_buffer_status (struct file *file, @@ -1815,7 +1807,6 @@ zoran_v4l2_buffer_status (struct file *file, return 0; } -#endif static int zoran_set_norm (struct zoran *zr, @@ -2624,8 +2615,6 @@ zoran_do_ioctl (struct inode *inode, } break; -#ifdef CONFIG_VIDEO_V4L2 - /* The new video4linux2 capture interface - much nicer than video4linux1, since * it allows for integrating the JPEG capturing calls inside standard v4l2 */ @@ -3447,7 +3436,7 @@ zoran_do_ioctl (struct inode *inode, /* unload capture */ if (zr->v4l_memgrab_active) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -4197,7 +4186,6 @@ zoran_do_ioctl (struct inode *inode, return 0; } break; -#endif default: dprintk(1, KERN_DEBUG "%s: UNKNOWN ioctl cmd: 0x%x\n", @@ -4247,7 +4235,7 @@ zoran_poll (struct file *file, dprintk(3, KERN_DEBUG "%s: %s() raw - active=%c, sync_tail=%lu/%c, pend_tail=%lu, pend_head=%lu\n", - ZR_DEVNAME(zr), __FUNCTION__, + ZR_DEVNAME(zr), __func__, "FAL"[fh->v4l_buffers.active], zr->v4l_sync_tail, "UPMD"[zr->v4l_buffers.buffer[frame].state], zr->v4l_pend_tail, zr->v4l_pend_head); @@ -4269,7 +4257,7 @@ zoran_poll (struct file *file, dprintk(3, KERN_DEBUG "%s: %s() jpg - active=%c, que_tail=%lu/%c, que_head=%lu, dma=%lu/%lu\n", - ZR_DEVNAME(zr), __FUNCTION__, + ZR_DEVNAME(zr), __func__, "FAL"[fh->jpg_buffers.active], zr->jpg_que_tail, "UPMD"[zr->jpg_buffers.buffer[frame].state], zr->jpg_que_head, zr->jpg_dma_tail, zr->jpg_dma_head); @@ -4387,7 +4375,7 @@ zoran_vm_close (struct vm_area_struct *vma) mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -4518,7 +4506,7 @@ zoran_mmap (struct file *file, if (todo > fraglen) todo = fraglen; pos = - le32_to_cpu((unsigned long) fh->jpg_buffers. + le32_to_cpu(fh->jpg_buffers. buffer[i].frag_tab[2 * j]); /* should just be pos on i386 */ page = virt_to_phys(bus_to_virt(pos)) @@ -4644,7 +4632,9 @@ static const struct file_operations zoran_fops = { .open = zoran_open, .release = zoran_close, .ioctl = zoran_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, +#endif .llseek = no_llseek, .read = zoran_read, .write = zoran_write, @@ -4655,9 +4645,7 @@ static const struct file_operations zoran_fops = { struct video_device zoran_template __devinitdata = { .name = ZORAN_NAME, .type = ZORAN_VID_TYPE, -#ifdef CONFIG_VIDEO_V4L2 .type2 = ZORAN_V4L2_VID_FLAGS, -#endif .fops = &zoran_fops, .release = &zoran_vdev_release, .minor = -1 diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran_procfs.c index 328ed6e7ac6..870bc5a70e3 100644 --- a/drivers/media/video/zoran_procfs.c +++ b/drivers/media/video/zoran_procfs.c @@ -180,6 +180,7 @@ static ssize_t zoran_write(struct file *file, const char __user *buffer, } static const struct file_operations zoran_operations = { + .owner = THIS_MODULE, .open = zoran_open, .read = seq_read, .write = zoran_write, @@ -195,10 +196,8 @@ zoran_proc_init (struct zoran *zr) char name[8]; snprintf(name, 7, "zoran%d", zr->id); - if ((zr->zoran_proc = create_proc_entry(name, 0, NULL))) { - zr->zoran_proc->data = zr; - zr->zoran_proc->owner = THIS_MODULE; - zr->zoran_proc->proc_fops = &zoran_operations; + zr->zoran_proc = proc_create_data(name, 0, NULL, &zoran_operations, zr); + if (zr->zoran_proc != NULL) { dprintk(2, KERN_INFO "%s: procfs entry /proc/%s allocated. data=%p\n", diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zr36016.c index dd084555da8..00d132bcd1e 100644 --- a/drivers/media/video/zr36016.c +++ b/drivers/media/video/zr36016.c @@ -55,11 +55,10 @@ #define MAX_CODECS 20 /* amount of chips attached via this driver */ -static int zr36016_codecs = 0; +static int zr36016_codecs; /* debugging is available via module parameter */ - -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-4)"); diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c index faae4ec3ea0..cf8b271a1c8 100644 --- a/drivers/media/video/zr36050.c +++ b/drivers/media/video/zr36050.c @@ -52,11 +52,10 @@ #define MAX_CODECS 20 /* amount of chips attached via this driver */ -static int zr36050_codecs = 0; +static int zr36050_codecs; /* debugging is available via module parameter */ - -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-4)"); diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c index 7849b65969d..8e74054d5ef 100644 --- a/drivers/media/video/zr36060.c +++ b/drivers/media/video/zr36060.c @@ -52,14 +52,14 @@ #define MAX_CODECS 20 /* amount of chips attached via this driver */ -static int zr36060_codecs = 0; +static int zr36060_codecs; -static int low_bitrate = 0; +static int low_bitrate; module_param(low_bitrate, bool, 0); MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); /* debugging is available via module parameter */ -static int debug = 0; +static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-4)"); diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 1b44784d0ef..a0e49dc6630 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -62,8 +62,8 @@ /* Module parameters */ -static int debug = 0; -static int mode = 0; +static int debug; +static int mode; /* Module parameters interface */ @@ -390,7 +390,7 @@ static int read_frame(struct zr364xx_camera *cam, int framenum) } -static ssize_t zr364xx_read(struct file *file, char *buf, size_t cnt, +static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t cnt, loff_t * ppos) { unsigned long count = cnt; |