aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-encoder.c150
1 files changed, 92 insertions, 58 deletions
diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
index ee5eb26ad56..7cd95e9f914 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
@@ -35,34 +35,41 @@
#define IVTV_MBOX_DRIVER_DONE 0x00000002
#define IVTV_MBOX_DRIVER_BUSY 0x00000001
+#define MBOX_BASE 0x44
+
static int pvr2_encoder_write_words(struct pvr2_hdw *hdw,
+ unsigned int offs,
const u32 *data, unsigned int dlen)
{
- unsigned int idx;
+ unsigned int idx,addr;
+ unsigned int bAddr;
int ret;
- unsigned int offs = 0;
unsigned int chunkCnt;
/*
Format: First byte must be 0x01. Remaining 32 bit words are
- spread out into chunks of 7 bytes each, little-endian ordered,
- offset at zero within each 2 blank bytes following and a
- single byte that is 0x44 plus the offset of the word. Repeat
- request for additional words, with offset adjusted
- accordingly.
+ spread out into chunks of 7 bytes each, with the first 4 bytes
+ being the data word (little endian), and the next 3 bytes
+ being the address where that data word is to be written (big
+ endian). Repeat request for additional words, with offset
+ adjusted accordingly.
*/
while (dlen) {
chunkCnt = 8;
if (chunkCnt > dlen) chunkCnt = dlen;
memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
- hdw->cmd_buffer[0] = FX2CMD_MEM_WRITE_DWORD;
+ bAddr = 0;
+ hdw->cmd_buffer[bAddr++] = FX2CMD_MEM_WRITE_DWORD;
for (idx = 0; idx < chunkCnt; idx++) {
- hdw->cmd_buffer[1+(idx*7)+6] = 0x44 + idx + offs;
- PVR2_DECOMPOSE_LE(hdw->cmd_buffer, 1+(idx*7),
- data[idx]);
+ addr = idx + offs;
+ hdw->cmd_buffer[bAddr+6] = (addr & 0xffu);
+ hdw->cmd_buffer[bAddr+5] = ((addr>>8) & 0xffu);
+ hdw->cmd_buffer[bAddr+4] = ((addr>>16) & 0xffu);
+ PVR2_DECOMPOSE_LE(hdw->cmd_buffer, bAddr,data[idx]);
+ bAddr += 7;
}
ret = pvr2_send_request(hdw,
hdw->cmd_buffer,1+(chunkCnt*7),
@@ -77,34 +84,42 @@ static int pvr2_encoder_write_words(struct pvr2_hdw *hdw,
}
-static int pvr2_encoder_read_words(struct pvr2_hdw *hdw,int statusFl,
+static int pvr2_encoder_read_words(struct pvr2_hdw *hdw,
+ unsigned int offs,
u32 *data, unsigned int dlen)
{
unsigned int idx;
int ret;
- unsigned int offs = 0;
unsigned int chunkCnt;
/*
Format: First byte must be 0x02 (status check) or 0x28 (read
back block of 32 bit words). Next 6 bytes must be zero,
- followed by a single byte of 0x44+offset for portion to be
- read. Returned data is packed set of 32 bits words that were
- read.
+ followed by a single byte of MBOX_BASE+offset for portion to
+ be read. Returned data is packed set of 32 bits words that
+ were read.
*/
while (dlen) {
chunkCnt = 16;
if (chunkCnt > dlen) chunkCnt = dlen;
- memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
+ if (chunkCnt < 16) chunkCnt = 1;
hdw->cmd_buffer[0] =
- (statusFl ? FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES);
- hdw->cmd_buffer[7] = 0x44 + offs;
+ ((chunkCnt == 1) ?
+ FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES);
+ hdw->cmd_buffer[1] = 0;
+ hdw->cmd_buffer[2] = 0;
+ hdw->cmd_buffer[3] = 0;
+ hdw->cmd_buffer[4] = 0;
+ hdw->cmd_buffer[5] = ((offs>>16) & 0xffu);
+ hdw->cmd_buffer[6] = ((offs>>8) & 0xffu);
+ hdw->cmd_buffer[7] = (offs & 0xffu);
ret = pvr2_send_request(hdw,
hdw->cmd_buffer,8,
- hdw->cmd_buffer,chunkCnt * 4);
+ hdw->cmd_buffer,
+ (chunkCnt == 1 ? 4 : 16 * 4));
if (ret) return ret;
for (idx = 0; idx < chunkCnt; idx++) {
@@ -131,6 +146,8 @@ static int pvr2_encoder_cmd(void *ctxt,
u32 *argp)
{
unsigned int poll_count;
+ unsigned int try_count = 0;
+ int retry_flag;
int ret = 0;
unsigned int idx;
/* These sizes look to be limited by the FX2 firmware implementation */
@@ -142,14 +159,15 @@ static int pvr2_encoder_cmd(void *ctxt,
/*
The encoder seems to speak entirely using blocks 32 bit words.
- In ivtv driver terms, this is a mailbox which we populate with
- data and watch what the hardware does with it. The first word
- is a set of flags used to control the transaction, the second
- word is the command to execute, the third byte is zero (ivtv
- driver suggests that this is some kind of return value), and
- the fourth byte is a specified timeout (windows driver always
- uses 0x00060000 except for one case when it is zero). All
- successive words are the argument words for the command.
+ In ivtv driver terms, this is a mailbox at MBOX_BASE which we
+ populate with data and watch what the hardware does with it.
+ The first word is a set of flags used to control the
+ transaction, the second word is the command to execute, the
+ third byte is zero (ivtv driver suggests that this is some
+ kind of return value), and the fourth byte is a specified
+ timeout (windows driver always uses 0x00060000 except for one
+ case when it is zero). All successive words are the argument
+ words for the command.
First, write out the entire set of words, with the first word
being zero.
@@ -158,13 +176,10 @@ static int pvr2_encoder_cmd(void *ctxt,
IVTV_MBOX_DRIVER_DONE | IVTV_DRIVER_BUSY this time (which
probably means "go").
- Next, read back 16 words as status. Check the first word,
+ Next, read back the return count words. Check the first word,
which should have IVTV_MBOX_FIRMWARE_DONE set. If however
that bit is not set, then the command isn't done so repeat the
- read.
-
- Next, read back 32 words and compare with the original
- arugments. Hopefully they will match.
+ read until it is set.
Finally, write out just the first word again, but set it to
0x0 this time (which probably means "idle").
@@ -194,6 +209,9 @@ static int pvr2_encoder_cmd(void *ctxt,
LOCK_TAKE(hdw->ctl_lock); do {
+ retry_flag = 0;
+ try_count++;
+ ret = 0;
wrData[0] = 0;
wrData[1] = cmd;
wrData[2] = 0;
@@ -205,54 +223,70 @@ static int pvr2_encoder_cmd(void *ctxt,
wrData[idx+4] = 0;
}
- ret = pvr2_encoder_write_words(hdw,wrData,idx);
+ ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,idx);
if (ret) break;
wrData[0] = IVTV_MBOX_DRIVER_DONE|IVTV_MBOX_DRIVER_BUSY;
- ret = pvr2_encoder_write_words(hdw,wrData,1);
+ ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
if (ret) break;
poll_count = 0;
while (1) {
- if (poll_count < 10000000) poll_count++;
- ret = pvr2_encoder_read_words(hdw,!0,rdData,1);
- if (ret) break;
+ poll_count++;
+ ret = pvr2_encoder_read_words(hdw,MBOX_BASE,rdData,
+ arg_cnt_recv+4);
+ if (ret) {
+ break;
+ }
if (rdData[0] & IVTV_MBOX_FIRMWARE_DONE) {
break;
}
- if (poll_count == 100) {
+ if (rdData[0] && (poll_count < 1000)) continue;
+ if (!rdData[0]) {
+ retry_flag = !0;
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Encoder timed out waiting for us"
+ "; arranging to retry");
+ } else {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
"***WARNING*** device's encoder"
" appears to be stuck"
" (status=0%08x)",rdData[0]);
+ }
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Encoder command: 0x%02x",cmd);
+ for (idx = 4; idx < arg_cnt_send; idx++) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Encoder command: 0x%02x",cmd);
- for (idx = 4; idx < arg_cnt_send; idx++) {
- pvr2_trace(
- PVR2_TRACE_ERROR_LEGS,
- "Encoder arg%d: 0x%08x",
- idx-3,wrData[idx]);
- }
- pvr2_trace(
- PVR2_TRACE_ERROR_LEGS,
- "Giving up waiting."
- " It is likely that"
- " this is a bad idea...");
- ret = -EBUSY;
- break;
+ "Encoder arg%d: 0x%08x",
+ idx-3,wrData[idx]);
}
+ ret = -EBUSY;
+ break;
+ }
+ if (retry_flag) {
+ if (try_count < 20) continue;
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Too many retries...");
+ ret = -EBUSY;
+ }
+ if (ret) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Giving up on command."
+ " It is likely that"
+ " this is a bad idea...");
+ break;
}
- if (ret) break;
wrData[0] = 0x7;
- ret = pvr2_encoder_read_words(
- hdw,0,rdData, ARRAY_SIZE(rdData));
- if (ret) break;
for (idx = 0; idx < arg_cnt_recv; idx++) {
argp[idx] = rdData[idx+4];
}
wrData[0] = 0x0;
- ret = pvr2_encoder_write_words(hdw,wrData,1);
+ ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
if (ret) break;
} while(0); LOCK_GIVE(hdw->ctl_lock);