aboutsummaryrefslogtreecommitdiff
path: root/drivers/message
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message')
-rw-r--r--drivers/message/fusion/Kconfig1
-rw-r--r--drivers/message/fusion/Makefile1
-rw-r--r--drivers/message/fusion/lsi/mpi_log_sas.h105
-rw-r--r--drivers/message/fusion/mptbase.c205
-rw-r--r--drivers/message/fusion/mptbase.h36
-rw-r--r--drivers/message/fusion/mptctl.c8
-rw-r--r--drivers/message/fusion/mptfc.c39
-rw-r--r--drivers/message/fusion/mptlan.c5
-rw-r--r--drivers/message/fusion/mptsas.c818
-rw-r--r--drivers/message/fusion/mptscsih.c2486
-rw-r--r--drivers/message/fusion/mptscsih.h12
-rw-r--r--drivers/message/fusion/mptspi.c735
-rw-r--r--drivers/message/i2o/exec-osm.c21
13 files changed, 1665 insertions, 2807 deletions
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index e67cf15e9c3..bbc22985288 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -9,6 +9,7 @@ config FUSION_SPI
tristate "Fusion MPT ScsiHost drivers for SPI"
depends on PCI && SCSI
select FUSION
+ select SCSI_SPI_ATTRS
---help---
SCSI HOST support for a parallel SCSI host adapters.
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 33ace373241..51740b34622 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -4,6 +4,7 @@
#EXTRA_CFLAGS += -DMPT_DEBUG_MSG_FRAME
#EXTRA_CFLAGS += -DMPT_DEBUG_SG
#EXTRA_CFLAGS += -DMPT_DEBUG_EVENTS
+#EXTRA_CFLAGS += -DMPT_DEBUG_VERBOSE_EVENTS
#EXTRA_CFLAGS += -DMPT_DEBUG_INIT
#EXTRA_CFLAGS += -DMPT_DEBUG_EXIT
#EXTRA_CFLAGS += -DMPT_DEBUG_FAIL
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 9259d1ad6e6..a9c14ad132c 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -3,38 +3,11 @@
* *
* Copyright 2003 LSI Logic Corporation. All rights reserved. *
* *
- * This file is confidential and a trade secret of LSI Logic. The *
- * receipt of or possession of this file does not convey any rights to *
- * reproduce or disclose its contents or to manufacture, use, or sell *
- * anything it may describe, in whole, or in part, without the specific *
- * written consent of LSI Logic Corporation. *
+ * Description *
+ * ------------ *
+ * This include file contains SAS firmware interface IOC Log Info codes *
* *
- ***************************************************************************
- *
- * Name: iopiIocLogInfo.h
- * Title: SAS Firmware IOP Interface IOC Log Info Definitions
- * Programmer: Guy Kendall
- * Creation Date: September 24, 2003
- *
- * Version History
- * ---------------
- *
- * Last Updated
- * -------------
- * Version %version: 22 %
- * Date Updated %date_modified: %
- * Programmer %created_by: nperucca %
- *
- * Date Who Description
- * -------- --- -------------------------------------------------------
- * 09/24/03 GWK Initial version
- *
- *
- * Description
- * ------------
- * This include file contains SAS firmware interface IOC Log Info codes
- *
- *-------------------------------------------------------------------------
+ *-------------------------------------------------------------------------*
*/
#ifndef IOPI_IOCLOGINFO_H_INCLUDED
@@ -57,6 +30,8 @@
#define IOC_LOGINFO_ORIGINATOR_PL (0x01000000)
#define IOC_LOGINFO_ORIGINATOR_IR (0x02000000)
+#define IOC_LOGINFO_ORIGINATOR_MASK (0x0F000000)
+
/****************************************************************************/
/* LOGINFO_CODE defines */
/****************************************************************************/
@@ -78,11 +53,27 @@
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
+#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
+#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
+
+#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
+#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
/****************************************************************************/
/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
/****************************************************************************/
#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000)
+#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT (0x00010001)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION (0x00010011)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY (0x00010018)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION (0x00010019)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT (0X0001001A)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0001001B)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED (0x0001001C)
#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
@@ -97,6 +88,7 @@
#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
@@ -105,11 +97,23 @@
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
-#define PL_LOGINFO_CODE_RESET (0x00110000)
-#define PL_LOGINFO_CODE_ABORT (0x00120000)
+#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below */
+#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below */
#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
+#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
+#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0000011B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
+
+#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
+#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
+#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
+
+
#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
@@ -123,26 +127,39 @@
#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
+#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */
-#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */
-#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */
-#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
-#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode */
/****************************************************************************/
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 642a61b6d0a..266414ca281 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -180,6 +180,7 @@ static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
/* module entry point */
static int __init fusion_init (void);
@@ -428,7 +429,7 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
if (results != evHandlers) {
/* CHECKME! Any special handling needed here? */
- devtprintk((MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
+ devtverboseprintk((MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
ioc->name, evHandlers, results));
}
@@ -438,10 +439,10 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
*/
if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
freereq = 0;
- devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
+ devtverboseprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
ioc->name, pEvReply));
} else {
- devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
+ devtverboseprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
ioc->name, pEvReply));
}
@@ -1120,65 +1121,6 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
return -1;
}
-int
-mpt_alt_ioc_wait(MPT_ADAPTER *ioc)
-{
- int loop_count = 30 * 4; /* Wait 30 seconds */
- int status = -1; /* -1 means failed to get board READY */
-
- do {
- spin_lock(&ioc->initializing_hba_lock);
- if (ioc->initializing_hba_lock_flag == 0) {
- ioc->initializing_hba_lock_flag=1;
- spin_unlock(&ioc->initializing_hba_lock);
- status = 0;
- break;
- }
- spin_unlock(&ioc->initializing_hba_lock);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ/4);
- } while (--loop_count);
-
- return status;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mpt_bringup_adapter - This is a wrapper function for mpt_do_ioc_recovery
- * @ioc: Pointer to MPT adapter structure
- * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
- *
- * This routine performs all the steps necessary to bring the IOC
- * to a OPERATIONAL state.
- *
- * Special Note: This function was added with spin lock's so as to allow
- * the dv(domain validation) work thread to succeed on the other channel
- * that maybe occuring at the same time when this function is called.
- * Without this lock, the dv would fail when message frames were
- * requested during hba bringup on the alternate ioc.
- */
-static int
-mpt_bringup_adapter(MPT_ADAPTER *ioc, int sleepFlag)
-{
- int r;
-
- if(ioc->alt_ioc) {
- if((r=mpt_alt_ioc_wait(ioc->alt_ioc)!=0))
- return r;
- }
-
- r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
- CAN_SLEEP);
-
- if(ioc->alt_ioc) {
- spin_lock(&ioc->alt_ioc->initializing_hba_lock);
- ioc->alt_ioc->initializing_hba_lock_flag=0;
- spin_unlock(&ioc->alt_ioc->initializing_hba_lock);
- }
-
-return r;
-}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_attach - Install a PCI intelligent MPT adapter.
@@ -1482,7 +1424,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
*/
mpt_detect_bound_ports(ioc, pdev);
- if ((r = mpt_bringup_adapter(ioc, CAN_SLEEP)) != 0){
+ if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+ CAN_SLEEP)) != 0){
printk(KERN_WARNING MYNAM
": WARNING - %s did not initialize properly! (%d)\n",
ioc->name, r);
@@ -1629,7 +1572,6 @@ mpt_resume(struct pci_dev *pdev)
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
u32 device_state = pdev->current_state;
int recovery_state;
- int ii;
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
@@ -1643,14 +1585,6 @@ mpt_resume(struct pci_dev *pdev)
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
ioc->active = 1;
- /* F/W not running */
- if(!CHIPREG_READ32(&ioc->chip->Doorbell)) {
- /* enable domain validation flags */
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_NEED_DV;
- }
- }
-
printk(MYIOC_s_INFO_FMT
"pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
ioc->name,
@@ -4938,7 +4872,7 @@ done_and_free:
return rc;
}
-int
+static int
mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
{
IOCPage3_t *pIoc3;
@@ -5146,13 +5080,13 @@ SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
if (evnp == NULL) {
- devtprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
+ devtverboseprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
ioc->name));
return 0;
}
memset(evnp, 0, sizeof(*evnp));
- devtprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
+ devtverboseprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
evnp->ChainOffset = 0;
@@ -5907,24 +5841,27 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
break;
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
{
+ char buf[50];
+ u8 id = (u8)(evData0);
u8 ReasonCode = (u8)(evData0 >> 16);
switch (ReasonCode) {
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
- ds = "SAS Device Status Change: Added";
+ sprintf(buf,"SAS Device Status Change: Added: id=%d", id);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
- ds = "SAS Device Status Change: Deleted";
+ sprintf(buf,"SAS Device Status Change: Deleted: id=%d", id);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
- ds = "SAS Device Status Change: SMART Data";
+ sprintf(buf,"SAS Device Status Change: SMART Data: id=%d", id);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
- ds = "SAS Device Status Change: No Persistancy Added";
+ sprintf(buf,"SAS Device Status Change: No Persistancy Added: id=%d", id);
break;
default:
- ds = "SAS Device Status Change: Unknown";
+ sprintf(buf,"SAS Device Status Change: Unknown: id=%d", id);
break;
}
+ ds = buf;
break;
}
case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
@@ -5940,11 +5877,97 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
ds = "Persistent Table Full";
break;
case MPI_EVENT_SAS_PHY_LINK_STATUS:
- ds = "SAS PHY Link Status";
+ {
+ char buf[50];
+ u8 LinkRates = (u8)(evData0 >> 8);
+ u8 PhyNumber = (u8)(evData0);
+ LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
+ MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
+ switch (LinkRates) {
+ case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
+ sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ " Rate Unknown",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
+ sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ " Phy Disabled",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
+ sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ " Failed Speed Nego",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
+ sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ " Sata OOB Completed",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
+ sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ " Rate 1.5 Gbps",PhyNumber);
+ break;
+ case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
+ sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ " Rate 3.0 Gpbs",PhyNumber);
+ break;
+ default:
+ sprintf(buf,"SAS PHY Link Status: Phy=%d", PhyNumber);
+ break;
+ }
+ ds = buf;
break;
+ }
case MPI_EVENT_SAS_DISCOVERY_ERROR:
ds = "SAS Discovery Error";
break;
+ case MPI_EVENT_IR_RESYNC_UPDATE:
+ {
+ u8 resync_complete = (u8)(evData0 >> 16);
+ char buf[40];
+ sprintf(buf,"IR Resync Update: Complete = %d:",resync_complete);
+ ds = buf;
+ break;
+ }
+ case MPI_EVENT_IR2:
+ {
+ u8 ReasonCode = (u8)(evData0 >> 16);
+ switch (ReasonCode) {
+ case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
+ ds = "IR2: LD State Changed";
+ break;
+ case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
+ ds = "IR2: PD State Changed";
+ break;
+ case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
+ ds = "IR2: Bad Block Table Full";
+ break;
+ case MPI_EVENT_IR2_RC_PD_INSERTED:
+ ds = "IR2: PD Inserted";
+ break;
+ case MPI_EVENT_IR2_RC_PD_REMOVED:
+ ds = "IR2: PD Removed";
+ break;
+ case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+ ds = "IR2: Foreign CFG Detected";
+ break;
+ case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
+ ds = "IR2: Rebuild Medium Error";
+ break;
+ default:
+ ds = "IR2";
+ break;
+ }
+ break;
+ }
+ case MPI_EVENT_SAS_DISCOVERY:
+ {
+ if (evData0)
+ ds = "SAS Discovery: Start";
+ else
+ ds = "SAS Discovery: Stop";
+ break;
+ }
+ case MPI_EVENT_LOG_ENTRY_ADDED:
+ ds = "SAS Log Entry Added";
+ break;
/*
* MPT base "custom" events may be added here...
@@ -5989,12 +6012,12 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
}
EventDescriptionStr(event, evData0, evStr);
- devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n",
+ devtprintk((MYIOC_s_INFO_FMT "MPT event:(%02Xh) : %s\n",
ioc->name,
- evStr,
- event));
+ event,
+ evStr));
-#if defined(MPT_DEBUG) || defined(MPT_DEBUG_EVENTS)
+#if defined(MPT_DEBUG) || defined(MPT_DEBUG_VERBOSE_EVENTS)
printk(KERN_INFO MYNAM ": Event data:\n" KERN_INFO);
for (ii = 0; ii < evDataLen; ii++)
printk(" %08x", le32_to_cpu(pEventReply->Data[ii]));
@@ -6053,7 +6076,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
*/
for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
if (MptEvHandlers[ii]) {
- devtprintk((MYIOC_s_INFO_FMT "Routing Event to event handler #%d\n",
+ devtverboseprintk((MYIOC_s_INFO_FMT "Routing Event to event handler #%d\n",
ioc->name, ii));
r += (*(MptEvHandlers[ii]))(ioc, pEventReply);
handlers++;
@@ -6065,10 +6088,10 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
* If needed, send (a single) EventAck.
*/
if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
- devtprintk((MYIOC_s_WARN_FMT
+ devtverboseprintk((MYIOC_s_WARN_FMT
"EventAck required\n",ioc->name));
if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
- devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
+ devtverboseprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
ioc->name, ii));
}
}
@@ -6205,8 +6228,8 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
"Abort", /* 12h */
"IO Not Yet Executed", /* 13h */
"IO Executed", /* 14h */
- NULL, /* 15h */
- NULL, /* 16h */
+ "Persistant Reservation Out Not Affiliation Owner", /* 15h */
+ "Open Transmit DMA Abort", /* 16h */
NULL, /* 17h */
NULL, /* 18h */
NULL, /* 19h */
@@ -6431,11 +6454,9 @@ EXPORT_SYMBOL(mpt_stm_index);
EXPORT_SYMBOL(mpt_HardResetHandler);
EXPORT_SYMBOL(mpt_config);
EXPORT_SYMBOL(mpt_findImVolumes);
-EXPORT_SYMBOL(mpt_read_ioc_pg_3);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
-EXPORT_SYMBOL(mpt_alt_ioc_wait);
EXPORT_SYMBOL(mptbase_GetFcPortPage0);
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 723d5430095..be7e8501b53 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.03.07"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.07"
+#define MPT_LINUX_VERSION_COMMON "3.03.08"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.08"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -331,6 +331,7 @@ typedef struct _SYSIF_REGS
* VirtDevice - FC LUN device or SCSI target device
*/
typedef struct _VirtTarget {
+ struct scsi_target *starget;
u8 tflags;
u8 ioc_id;
u8 target_id;
@@ -343,14 +344,10 @@ typedef struct _VirtTarget {
u8 type; /* byte 0 of Inquiry data */
u32 num_luns;
u32 luns[8]; /* Max LUNs is 256 */
- u8 inq_data[8];
} VirtTarget;
typedef struct _VirtDevice {
- VirtTarget *vtarget;
- u8 ioc_id;
- u8 bus_id;
- u8 target_id;
+ VirtTarget *vtarget;
u8 configured_lun;
u32 lun;
} VirtDevice;
@@ -364,6 +361,7 @@ typedef struct _VirtDevice {
#define MPT_TARGET_FLAGS_Q_YES 0x08
#define MPT_TARGET_FLAGS_VALID_56 0x10
#define MPT_TARGET_FLAGS_SAF_TE_ISSUED 0x20
+#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x40
/*
* /proc/mpt interface
@@ -447,13 +445,6 @@ typedef struct _mpt_ioctl_events {
* Substructure to store SCSI specific configuration page data
*/
/* dvStatus defines: */
-#define MPT_SCSICFG_NEGOTIATE 0x01 /* Negotiate on next IO */
-#define MPT_SCSICFG_NEED_DV 0x02 /* Schedule DV */
-#define MPT_SCSICFG_DV_PENDING 0x04 /* DV on this physical id pending */
-#define MPT_SCSICFG_DV_NOT_DONE 0x08 /* DV has not been performed */
-#define MPT_SCSICFG_BLK_NEGO 0x10 /* WriteSDP1 with WDTR and SDTR disabled */
-#define MPT_SCSICFG_RELOAD_IOC_PG3 0x20 /* IOC Pg 3 data is obsolete */
- /* Args passed to writeSDP1: */
#define MPT_SCSICFG_USE_NVRAM 0x01 /* WriteSDP1 using NVRAM */
#define MPT_SCSICFG_ALL_IDS 0x02 /* WriteSDP1 to all IDS */
/* #define MPT_SCSICFG_BLK_NEGO 0x10 WriteSDP1 with WDTR and SDTR disabled */
@@ -464,7 +455,6 @@ typedef struct _SpiCfgData {
IOCPage4_t *pIocPg4; /* SEP devices addressing */
dma_addr_t IocPg4_dma; /* Phys Addr of IOCPage4 data */
int IocPg4Sz; /* IOCPage4 size */
- u8 dvStatus[MPT_MAX_SCSI_DEVICES];
u8 minSyncFactor; /* 0xFF if async */
u8 maxSyncOffset; /* 0 if async */
u8 maxBusWidth; /* 0 if narrow, 1 if wide */
@@ -474,13 +464,11 @@ typedef struct _SpiCfgData {
u8 sdp0version; /* SDP0 version */
u8 sdp0length; /* SDP0 length */
u8 dvScheduled; /* 1 if scheduled */
- u8 forceDv; /* 1 to force DV scheduling */
u8 noQas; /* Disable QAS for this adapter */
u8 Saf_Te; /* 1 to force all Processors as
* SAF-TE if Inquiry data length
* is too short to check for SAF-TE
*/
- u8 mpt_dv; /* command line option: enhanced=1, basic=0 */
u8 bus_reset; /* 1 to allow bus reset */
u8 rsvd[1];
}SpiCfgData;
@@ -631,6 +619,10 @@ typedef struct _MPT_ADAPTER
struct net_device *netdev;
struct list_head sas_topology;
struct mutex sas_topology_mutex;
+ struct mutex sas_discovery_mutex;
+ u8 sas_discovery_runtime;
+ u8 sas_discovery_ignore_events;
+ int sas_index; /* index refrencing */
MPT_SAS_MGMT sas_mgmt;
int num_ports;
struct work_struct mptscsih_persistTask;
@@ -728,12 +720,18 @@ typedef struct _mpt_sge {
#define dhsprintk(x)
#endif
-#ifdef MPT_DEBUG_EVENTS
+#if defined(MPT_DEBUG_EVENTS) || defined(MPT_DEBUG_VERBOSE_EVENTS)
#define devtprintk(x) printk x
#else
#define devtprintk(x)
#endif
+#ifdef MPT_DEBUG_VERBOSE_EVENTS
+#define devtverboseprintk(x) printk x
+#else
+#define devtverboseprintk(x)
+#endif
+
#ifdef MPT_DEBUG_RESET
#define drsprintk(x) printk x
#else
@@ -1030,10 +1028,8 @@ extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
-extern int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
extern int mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
-extern int mpt_alt_ioc_wait(MPT_ADAPTER *ioc);
/*
* Public data decl's...
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 9b64e07400d..b4967bb8a7d 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -140,7 +140,7 @@ static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase);
* Event Handler function
*/
static int mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
-struct fasync_struct *async_queue=NULL;
+static struct fasync_struct *async_queue=NULL;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
@@ -497,7 +497,7 @@ mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
if (event == 0x21 ) {
ioc->aen_event_read_flag=1;
dctlprintk(("Raised SIGIO to application\n"));
- devtprintk(("Raised SIGIO to application\n"));
+ devtverboseprintk(("Raised SIGIO to application\n"));
kill_fasync(&async_queue, SIGIO, POLL_IN);
return 1;
}
@@ -515,7 +515,7 @@ mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
ioc->aen_event_read_flag=1;
dctlprintk(("Raised SIGIO to application\n"));
- devtprintk(("Raised SIGIO to application\n"));
+ devtverboseprintk(("Raised SIGIO to application\n"));
kill_fasync(&async_queue, SIGIO, POLL_IN);
}
return 1;
@@ -2968,7 +2968,7 @@ static int __init mptctl_init(void)
}
if (mpt_event_register(mptctl_id, mptctl_event_process) == 0) {
- devtprintk((KERN_INFO MYNAM
+ devtverboseprintk((KERN_INFO MYNAM
": Registered for IOC event notifications\n"));
}
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index c3a3499bce2..b343f2a68b1 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -154,7 +154,7 @@ MODULE_DEVICE_TABLE(pci, mptfc_pci_table);
static struct scsi_transport_template *mptfc_transport_template = NULL;
-struct fc_function_template mptfc_transport_functions = {
+static struct fc_function_template mptfc_transport_functions = {
.dd_fcrport_size = 8,
.show_host_node_name = 1,
.show_host_port_name = 1,
@@ -349,24 +349,6 @@ mptfc_generate_rport_ids(FCDevicePage0_t *pg0, struct fc_rport_identifiers *rid)
}
static void
-mptfc_remap_sdev(struct scsi_device *sdev, void *arg)
-{
- VirtDevice *vdev;
- VirtTarget *vtarget;
- struct scsi_target *starget;
-
- starget = scsi_target(sdev);
- if (starget->hostdata == arg) {
- vtarget = arg;
- vdev = sdev->hostdata;
- if (vdev) {
- vdev->bus_id = vtarget->bus_id;
- vdev->target_id = vtarget->target_id;
- }
- }
-}
-
-static void
mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
{
struct fc_rport_identifiers rport_ids;
@@ -423,8 +405,6 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
if (vtarget) {
vtarget->target_id = pg0->CurrentTargetID;
vtarget->bus_id = pg0->CurrentBus;
- starget_for_each_device(ri->starget,
- vtarget,mptfc_remap_sdev);
}
ri->remap_needed = 0;
}
@@ -432,7 +412,7 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
"mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
"rport tid %d, tmo %d\n",
ioc->name,
- oc->sh->host_no,
+ ioc->sh->host_no,
pg0->PortIdentifier,
pg0->WWNN,
pg0->WWPN,
@@ -514,7 +494,7 @@ mptfc_target_alloc(struct scsi_target *starget)
* Return non-zero if allocation fails.
* Init memory once per LUN.
*/
-int
+static int
mptfc_slave_alloc(struct scsi_device *sdev)
{
MPT_SCSI_HOST *hd;
@@ -553,23 +533,26 @@ mptfc_slave_alloc(struct scsi_device *sdev)
}
vdev->vtarget = vtarget;
- vdev->ioc_id = hd->ioc->id;
vdev->lun = sdev->lun;
- vdev->target_id = vtarget->target_id;
- vdev->bus_id = vtarget->bus_id;
spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
vtarget->num_luns++;
+#ifdef DMPT_DEBUG_FC
+ {
+ struct mptfc_rport_info *ri;
+ ri = *((struct mptfc_rport_info **)rport->dd_data);
dfcprintk ((MYIOC_s_INFO_FMT
"mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
"CurrentTargetID %d, %x %llx %llx\n",
- ioc->name,
+ hd->ioc->name,
sdev->host->host_no,
vtarget->num_luns,
sdev->id, ri->pg0.CurrentTargetID,
ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN));
+ }
+#endif
return 0;
}
@@ -941,7 +924,7 @@ mptfc_init(void)
mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER);
if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) {
- devtprintk((KERN_INFO MYNAM
+ devtverboseprintk((KERN_INFO MYNAM
": Registered for IOC event notifications\n"));
}
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index 73f59528212..314c3a27585 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -1152,10 +1152,7 @@ mpt_lan_receive_post_reply(struct net_device *dev,
priv->mpt_rxfidx_tail,
MPT_LAN_MAX_BUCKETS_OUT);
- panic("Damn it Jim! I'm a doctor, not a programmer! "
- "Oh, wait a sec, I am a programmer. "
- "And, who's Jim?!?!\n"
- "Arrgghh! We've done it again!\n");
+ return -1;
}
if (remaining == 0)
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 2512d0e6155..010d4a39269 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -104,6 +104,13 @@ struct mptsas_hotplug_event {
u16 handle;
u16 parent_handle;
u8 phy_id;
+ u8 phys_disk_num;
+ u8 phys_disk_num_valid;
+};
+
+struct mptsas_discovery_event {
+ struct work_struct work;
+ MPT_ADAPTER *ioc;
};
/*
@@ -117,6 +124,8 @@ struct mptsas_hotplug_event {
struct mptsas_devinfo {
u16 handle; /* unique id to address this device */
u16 handle_parent; /* unique id to address parent device */
+ u16 handle_enclosure; /* enclosure identifier of the enclosure */
+ u16 slot; /* physical slot in enclosure */
u8 phy_id; /* phy number of parent device */
u8 port_id; /* sas physical port this device
is assoc'd with */
@@ -137,6 +146,7 @@ struct mptsas_phyinfo {
struct mptsas_devinfo attached; /* point to attached device info */
struct sas_phy *phy;
struct sas_rphy *rphy;
+ struct scsi_target *starget;
};
struct mptsas_portinfo {
@@ -146,6 +156,17 @@ struct mptsas_portinfo {
struct mptsas_phyinfo *phy_info;
};
+struct mptsas_enclosure {
+ u64 enclosure_logical_id; /* The WWN for the enclosure */
+ u16 enclosure_handle; /* unique id to address this */
+ u16 flags; /* details enclosure management */
+ u16 num_slot; /* num slots */
+ u16 start_slot; /* first slot */
+ u8 start_id; /* starting logical target id */
+ u8 start_channel; /* starting logical channel id */
+ u8 sep_id; /* SEP device logical target id */
+ u8 sep_channel; /* SEP channel logical channel id */
+};
#ifdef SASDEBUG
static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
@@ -205,6 +226,7 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
printk("---- SAS DEVICE PAGE 0 ---------\n");
printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
+ printk("Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle));
printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
@@ -243,6 +265,111 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
#define mptsas_print_expander_pg1(pg1) do { } while (0)
#endif
+static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
+{
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+}
+
+static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
+{
+ struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
+ return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+}
+
+/*
+ * mptsas_find_portinfo_by_handle
+ *
+ * This function should be called with the sas_topology_mutex already held
+ */
+static struct mptsas_portinfo *
+mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
+{
+ struct mptsas_portinfo *port_info, *rc=NULL;
+ int i;
+
+ list_for_each_entry(port_info, &ioc->sas_topology, list)
+ for (i = 0; i < port_info->num_phys; i++)
+ if (port_info->phy_info[i].identify.handle == handle) {
+ rc = port_info;
+ goto out;
+ }
+ out:
+ return rc;
+}
+
+static int
+mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
+ u32 form, u32 form_specific)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasEnclosurePage0_t *buffer;
+ dma_addr_t dma_handle;
+ int error;
+ __le64 le_identifier;
+
+ memset(&hdr, 0, sizeof(hdr));
+ hdr.PageVersion = MPI_SASENCLOSURE0_PAGEVERSION;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_ENCLOSURE;
+
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.pageAddr = form + form_specific;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out;
+ if (!hdr.ExtPageLength) {
+ error = -ENXIO;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
+
+ /* save config data */
+ memcpy(&le_identifier, &buffer->EnclosureLogicalID, sizeof(__le64));
+ enclosure->enclosure_logical_id = le64_to_cpu(le_identifier);
+ enclosure->enclosure_handle = le16_to_cpu(buffer->EnclosureHandle);
+ enclosure->flags = le16_to_cpu(buffer->Flags);
+ enclosure->num_slot = le16_to_cpu(buffer->NumSlots);
+ enclosure->start_slot = le16_to_cpu(buffer->StartSlot);
+ enclosure->start_id = buffer->StartTargetID;
+ enclosure->start_channel = buffer->StartBus;
+ enclosure->sep_id = buffer->SEPTargetID;
+ enclosure->sep_channel = buffer->SEPBus;
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return error;
+}
+
+static int
+mptsas_slave_configure(struct scsi_device *sdev)
+{
+ sas_read_port_mode_page(sdev);
+
+ return mptscsih_slave_configure(sdev);
+}
/*
* This is pretty ugly. We will be able to seriously clean it up
@@ -259,6 +386,7 @@ mptsas_slave_alloc(struct scsi_device *sdev)
VirtTarget *vtarget;
VirtDevice *vdev;
struct scsi_target *starget;
+ u32 target_id;
int i;
vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
@@ -267,10 +395,10 @@ mptsas_slave_alloc(struct scsi_device *sdev)
hd->ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
- vdev->ioc_id = hd->ioc->id;
sdev->hostdata = vdev;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
+ vtarget->ioc_id = hd->ioc->id;
vdev->vtarget = vtarget;
if (vtarget->num_luns == 0) {
vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
@@ -281,8 +409,8 @@ mptsas_slave_alloc(struct scsi_device *sdev)
RAID volumes placed beyond the last expected port.
*/
if (sdev->channel == hd->ioc->num_ports) {
- vdev->target_id = sdev->id;
- vdev->bus_id = 0;
+ target_id = sdev->id;
+ vtarget->bus_id = 0;
vdev->lun = 0;
goto out;
}
@@ -293,11 +421,21 @@ mptsas_slave_alloc(struct scsi_device *sdev)
for (i = 0; i < p->num_phys; i++) {
if (p->phy_info[i].attached.sas_address ==
rphy->identify.sas_address) {
- vdev->target_id =
- p->phy_info[i].attached.id;
- vdev->bus_id = p->phy_info[i].attached.channel;
+ target_id = p->phy_info[i].attached.id;
+ vtarget->bus_id = p->phy_info[i].attached.channel;
vdev->lun = sdev->lun;
- mutex_unlock(&hd->ioc->sas_topology_mutex);
+ p->phy_info[i].starget = sdev->sdev_target;
+ /*
+ * Exposing hidden disk (RAID)
+ */
+ if (mptscsih_is_phys_disk(hd->ioc, target_id)) {
+ target_id = mptscsih_raid_id_to_num(hd,
+ target_id);
+ vdev->vtarget->tflags |=
+ MPT_TARGET_FLAGS_RAID_COMPONENT;
+ sdev->no_uld_attach = 1;
+ }
+ mutex_unlock(&hd->ioc->sas_topology_mutex);
goto out;
}
}
@@ -308,9 +446,7 @@ mptsas_slave_alloc(struct scsi_device *sdev)
return -ENXIO;
out:
- vtarget->ioc_id = vdev->ioc_id;
- vtarget->target_id = vdev->target_id;
- vtarget->bus_id = vdev->bus_id;
+ vtarget->target_id = target_id;
vtarget->num_luns++;
return 0;
}
@@ -320,41 +456,17 @@ mptsas_slave_destroy(struct scsi_device *sdev)
{
struct Scsi_Host *host = sdev->host;
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
- struct sas_rphy *rphy;
- struct mptsas_portinfo *p;
- int i;
VirtDevice *vdev;
/*
- * Handle hotplug removal case.
- * We need to clear out attached data structure.
- */
- rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
-
- mutex_lock(&hd->ioc->sas_topology_mutex);
- list_for_each_entry(p, &hd->ioc->sas_topology, list) {
- for (i = 0; i < p->num_phys; i++) {
- if (p->phy_info[i].attached.sas_address ==
- rphy->identify.sas_address) {
- memset(&p->phy_info[i].attached, 0,
- sizeof(struct mptsas_devinfo));
- p->phy_info[i].rphy = NULL;
- goto out;
- }
- }
- }
-
- out:
- mutex_unlock(&hd->ioc->sas_topology_mutex);
- /*
* Issue target reset to flush firmware outstanding commands.
*/
vdev = sdev->hostdata;
if (vdev->configured_lun){
if (mptscsih_TMHandler(hd,
MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
- vdev->bus_id,
- vdev->target_id,
+ vdev->vtarget->bus_id,
+ vdev->vtarget->target_id,
0, 0, 5 /* 5 second timeout */)
< 0){
@@ -364,7 +476,7 @@ mptsas_slave_destroy(struct scsi_device *sdev)
printk(MYIOC_s_WARN_FMT
"Error processing TaskMgmt id=%d TARGET_RESET\n",
hd->ioc->name,
- vdev->target_id);
+ vdev->vtarget->target_id);
hd->tmPending = 0;
hd->tmState = TM_STATE_NONE;
@@ -382,7 +494,7 @@ static struct scsi_host_template mptsas_driver_template = {
.queuecommand = mptscsih_qcmd,
.target_alloc = mptscsih_target_alloc,
.slave_alloc = mptsas_slave_alloc,
- .slave_configure = mptscsih_slave_configure,
+ .slave_configure = mptsas_slave_configure,
.target_destroy = mptscsih_target_destroy,
.slave_destroy = mptsas_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
@@ -399,12 +511,6 @@ static struct scsi_host_template mptsas_driver_template = {
.use_clustering = ENABLE_CLUSTERING,
};
-static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
-{
- struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
- return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
-}
-
static int mptsas_get_linkerrors(struct sas_phy *phy)
{
MPT_ADAPTER *ioc = phy_to_ioc(phy);
@@ -546,8 +652,67 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
return error;
}
+static int
+mptsas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+{
+ MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
+ int i, error;
+ struct mptsas_portinfo *p;
+ struct mptsas_enclosure enclosure_info;
+ u64 enclosure_handle;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(p, &ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address ==
+ rphy->identify.sas_address) {
+ enclosure_handle = p->phy_info[i].
+ attached.handle_enclosure;
+ goto found_info;
+ }
+ }
+ }
+ mutex_unlock(&ioc->sas_topology_mutex);
+ return -ENXIO;
+
+ found_info:
+ mutex_unlock(&ioc->sas_topology_mutex);
+ memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+ error = mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+ (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+ MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), enclosure_handle);
+ if (!error)
+ *identifier = enclosure_info.enclosure_logical_id;
+ return error;
+}
+
+static int
+mptsas_get_bay_identifier(struct sas_rphy *rphy)
+{
+ MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
+ struct mptsas_portinfo *p;
+ int i, rc;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(p, &ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address ==
+ rphy->identify.sas_address) {
+ rc = p->phy_info[i].attached.slot;
+ goto out;
+ }
+ }
+ }
+ rc = -ENXIO;
+ out:
+ mutex_unlock(&ioc->sas_topology_mutex);
+ return rc;
+}
+
static struct sas_function_template mptsas_transport_functions = {
.get_linkerrors = mptsas_get_linkerrors,
+ .get_enclosure_identifier = mptsas_get_enclosure_identifier,
+ .get_bay_identifier = mptsas_get_bay_identifier,
.phy_reset = mptsas_phy_reset,
};
@@ -607,6 +772,9 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
goto out_free_consistent;
}
+ if (port_info->num_phys)
+ port_info->handle =
+ le16_to_cpu(buffer->PhyData[0].ControllerDevHandle);
for (i = 0; i < port_info->num_phys; i++) {
mptsas_print_phy_data(&buffer->PhyData[i]);
port_info->phy_info[i].phy_id = i;
@@ -713,6 +881,7 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
cfg.dir = 0; /* read */
cfg.timeout = 10;
+ memset(device_info, 0, sizeof(struct mptsas_devinfo));
error = mpt_config(ioc, &cfg);
if (error)
goto out;
@@ -739,6 +908,9 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
device_info->handle = le16_to_cpu(buffer->DevHandle);
device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
+ device_info->handle_enclosure =
+ le16_to_cpu(buffer->EnclosureHandle);
+ device_info->slot = le16_to_cpu(buffer->Slot);
device_info->phy_id = buffer->PhyNum;
device_info->port_id = buffer->PhysicalPort;
device_info->id = buffer->TargetID;
@@ -780,6 +952,7 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
cfg.dir = 0; /* read */
cfg.timeout = 10;
+ memset(port_info, 0, sizeof(struct mptsas_portinfo));
error = mpt_config(ioc, &cfg);
if (error)
goto out;
@@ -880,7 +1053,6 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
-
out_free_consistent:
pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
buffer, dma_handle);
@@ -970,12 +1142,19 @@ mptsas_parse_device_info(struct sas_identify *identify,
static int mptsas_probe_one_phy(struct device *dev,
struct mptsas_phyinfo *phy_info, int index, int local)
{
+ MPT_ADAPTER *ioc;
struct sas_phy *phy;
int error;
- phy = sas_phy_alloc(dev, index);
- if (!phy)
- return -ENOMEM;
+ if (!dev)
+ return -ENODEV;
+
+ if (!phy_info->phy) {
+ phy = sas_phy_alloc(dev, index);
+ if (!phy)
+ return -ENOMEM;
+ } else
+ phy = phy_info->phy;
phy->port_identifier = phy_info->port_id;
mptsas_parse_device_info(&phy->identify, &phy_info->identify);
@@ -1061,24 +1240,54 @@ static int mptsas_probe_one_phy(struct device *dev,
break;
}
- if (local)
- phy->local_attached = 1;
+ if (!phy_info->phy) {
- error = sas_phy_add(phy);
- if (error) {
- sas_phy_free(phy);
- return error;
+ if (local)
+ phy->local_attached = 1;
+
+ error = sas_phy_add(phy);
+ if (error) {
+ sas_phy_free(phy);
+ return error;
+ }
+ phy_info->phy = phy;
}
- phy_info->phy = phy;
- if (phy_info->attached.handle) {
+ if ((phy_info->attached.handle) &&
+ (!phy_info->rphy)) {
+
struct sas_rphy *rphy;
+ struct sas_identify identify;
+
+ ioc = phy_to_ioc(phy_info->phy);
- rphy = sas_rphy_alloc(phy);
+ /*
+ * Let the hotplug_work thread handle processing
+ * the adding/removing of devices that occur
+ * after start of day.
+ */
+ if (ioc->sas_discovery_runtime &&
+ mptsas_is_end_device(&phy_info->attached))
+ return 0;
+
+ mptsas_parse_device_info(&identify, &phy_info->attached);
+ switch (identify.device_type) {
+ case SAS_END_DEVICE:
+ rphy = sas_end_device_alloc(phy);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ rphy = sas_expander_alloc(phy, identify.device_type);
+ break;
+ default:
+ rphy = NULL;
+ break;
+ }
if (!rphy)
return 0; /* non-fatal: an rphy can be added later */
- mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
+ rphy->identify = identify;
+
error = sas_rphy_add(rphy);
if (error) {
sas_rphy_free(rphy);
@@ -1092,24 +1301,37 @@ static int mptsas_probe_one_phy(struct device *dev,
}
static int
-mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
+mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
{
- struct mptsas_portinfo *port_info;
+ struct mptsas_portinfo *port_info, *hba;
u32 handle = 0xFFFF;
int error = -ENOMEM, i;
- port_info = kzalloc(sizeof(*port_info), GFP_KERNEL);
- if (!port_info)
+ hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
+ if (! hba)
goto out;
- error = mptsas_sas_io_unit_pg0(ioc, port_info);
+ error = mptsas_sas_io_unit_pg0(ioc, hba);
if (error)
goto out_free_port_info;
- ioc->num_ports = port_info->num_phys;
mutex_lock(&ioc->sas_topology_mutex);
- list_add_tail(&port_info->list, &ioc->sas_topology);
+ port_info = mptsas_find_portinfo_by_handle(ioc, hba->handle);
+ if (!port_info) {
+ port_info = hba;
+ list_add_tail(&port_info->list, &ioc->sas_topology);
+ } else {
+ port_info->handle = hba->handle;
+ for (i = 0; i < hba->num_phys; i++)
+ port_info->phy_info[i].negotiated_link_rate =
+ hba->phy_info[i].negotiated_link_rate;
+ if (hba->phy_info)
+ kfree(hba->phy_info);
+ kfree(hba);
+ hba = NULL;
+ }
mutex_unlock(&ioc->sas_topology_mutex);
+ ioc->num_ports = port_info->num_phys;
for (i = 0; i < port_info->num_phys; i++) {
mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
@@ -1132,38 +1354,49 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
}
mptsas_probe_one_phy(&ioc->sh->shost_gendev,
- &port_info->phy_info[i], *index, 1);
- (*index)++;
+ &port_info->phy_info[i], ioc->sas_index, 1);
+ ioc->sas_index++;
}
return 0;
out_free_port_info:
- kfree(port_info);
+ if (hba)
+ kfree(hba);
out:
return error;
}
static int
-mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
+mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
{
- struct mptsas_portinfo *port_info, *p;
+ struct mptsas_portinfo *port_info, *p, *ex;
int error = -ENOMEM, i, j;
- port_info = kzalloc(sizeof(*port_info), GFP_KERNEL);
- if (!port_info)
+ ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
+ if (!ex)
goto out;
- error = mptsas_sas_expander_pg0(ioc, port_info,
+ error = mptsas_sas_expander_pg0(ioc, ex,
(MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
if (error)
goto out_free_port_info;
- *handle = port_info->handle;
+ *handle = ex->handle;
mutex_lock(&ioc->sas_topology_mutex);
- list_add_tail(&port_info->list, &ioc->sas_topology);
+ port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
+ if (!port_info) {
+ port_info = ex;
+ list_add_tail(&port_info->list, &ioc->sas_topology);
+ } else {
+ port_info->handle = ex->handle;
+ if (ex->phy_info)
+ kfree(ex->phy_info);
+ kfree(ex);
+ ex = NULL;
+ }
mutex_unlock(&ioc->sas_topology_mutex);
for (i = 0; i < port_info->num_phys; i++) {
@@ -1189,6 +1422,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
port_info->phy_info[i].attached.handle);
+ port_info->phy_info[i].attached.phy_id =
+ port_info->phy_info[i].phy_id;
}
/*
@@ -1208,27 +1443,137 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
mutex_unlock(&ioc->sas_topology_mutex);
mptsas_probe_one_phy(parent, &port_info->phy_info[i],
- *index, 0);
- (*index)++;
+ ioc->sas_index, 0);
+ ioc->sas_index++;
}
return 0;
out_free_port_info:
- kfree(port_info);
+ if (ex) {
+ if (ex->phy_info)
+ kfree(ex->phy_info);
+ kfree(ex);
+ }
out:
return error;
}
+/*
+ * mptsas_delete_expander_phys
+ *
+ *
+ * This will traverse topology, and remove expanders
+ * that are no longer present
+ */
+static void
+mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
+{
+ struct mptsas_portinfo buffer;
+ struct mptsas_portinfo *port_info, *n, *parent;
+ int i;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
+
+ if (port_info->phy_info &&
+ (!(port_info->phy_info[0].identify.device_info &
+ MPI_SAS_DEVICE_INFO_SMP_TARGET)))
+ continue;
+
+ if (mptsas_sas_expander_pg0(ioc, &buffer,
+ (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), port_info->handle)) {
+
+ /*
+ * Obtain the port_info instance to the parent port
+ */
+ parent = mptsas_find_portinfo_by_handle(ioc,
+ port_info->phy_info[0].identify.handle_parent);
+
+ if (!parent)
+ goto next_port;
+
+ /*
+ * Delete rphys in the parent that point
+ * to this expander. The transport layer will
+ * cleanup all the children.
+ */
+ for (i = 0; i < parent->num_phys; i++) {
+ if ((!parent->phy_info[i].rphy) ||
+ (parent->phy_info[i].attached.sas_address !=
+ port_info->phy_info[i].identify.sas_address))
+ continue;
+ sas_rphy_delete(parent->phy_info[i].rphy);
+ memset(&parent->phy_info[i].attached, 0,
+ sizeof(struct mptsas_devinfo));
+ parent->phy_info[i].rphy = NULL;
+ parent->phy_info[i].starget = NULL;
+ }
+ next_port:
+ list_del(&port_info->list);
+ if (port_info->phy_info)
+ kfree(port_info->phy_info);
+ kfree(port_info);
+ }
+ /*
+ * Free this memory allocated from inside
+ * mptsas_sas_expander_pg0
+ */
+ if (buffer.phy_info)
+ kfree(buffer.phy_info);
+ }
+ mutex_unlock(&ioc->sas_topology_mutex);
+}
+
+/*
+ * Start of day discovery
+ */
static void
mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
{
u32 handle = 0xFFFF;
- int index = 0;
+ int i;
+
+ mutex_lock(&ioc->sas_discovery_mutex);
+ mptsas_probe_hba_phys(ioc);
+ while (!mptsas_probe_expander_phys(ioc, &handle))
+ ;
+ /*
+ Reporting RAID volumes.
+ */
+ if (!ioc->raid_data.pIocPg2)
+ goto out;
+ if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
+ goto out;
+ for (i=0; i<ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+ scsi_add_device(ioc->sh, ioc->num_ports,
+ ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
+ }
+ out:
+ mutex_unlock(&ioc->sas_discovery_mutex);
+}
+
+/*
+ * Work queue thread to handle Runtime discovery
+ * Mere purpose is the hot add/delete of expanders
+ */
+static void
+mptscsih_discovery_work(void * arg)
+{
+ struct mptsas_discovery_event *ev = arg;
+ MPT_ADAPTER *ioc = ev->ioc;
+ u32 handle = 0xFFFF;
- mptsas_probe_hba_phys(ioc, &index);
- while (!mptsas_probe_expander_phys(ioc, &handle, &index))
+ mutex_lock(&ioc->sas_discovery_mutex);
+ ioc->sas_discovery_runtime=1;
+ mptsas_delete_expander_phys(ioc);
+ mptsas_probe_hba_phys(ioc);
+ while (!mptsas_probe_expander_phys(ioc, &handle))
;
+ kfree(ev);
+ ioc->sas_discovery_runtime=0;
+ mutex_unlock(&ioc->sas_discovery_mutex);
}
static struct mptsas_phyinfo *
@@ -1246,10 +1591,8 @@ mptsas_find_phyinfo_by_parent(MPT_ADAPTER *ioc, u16 parent_handle, u8 phy_id)
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
parent_handle);
- if (error) {
- printk("mptsas: failed to retrieve device page\n");
+ if (error)
return NULL;
- }
/*
* The phy_info structures are never deallocated during lifetime of
@@ -1296,6 +1639,35 @@ mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id)
return phy_info;
}
+/*
+ * Work queue thread to clear the persitency table
+ */
+static void
+mptscsih_sas_persist_clear_table(void * arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+
+ mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
+}
+
+static void
+mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
+{
+ sdev->no_uld_attach = data ? 1 : 0;
+ scsi_device_reprobe(sdev);
+}
+
+static void
+mptsas_reprobe_target(struct scsi_target *starget, int uld_attach)
+{
+ starget_for_each_device(starget, uld_attach ? (void *)1 : NULL,
+ mptsas_reprobe_lun);
+}
+
+
+/*
+ * Work queue thread to handle SAS hotplug events
+ */
static void
mptsas_hotplug_work(void *arg)
{
@@ -1304,16 +1676,39 @@ mptsas_hotplug_work(void *arg)
struct mptsas_phyinfo *phy_info;
struct sas_rphy *rphy;
struct scsi_device *sdev;
+ struct sas_identify identify;
char *ds = NULL;
struct mptsas_devinfo sas_device;
+ VirtTarget *vtarget;
+
+ mutex_lock(&ioc->sas_discovery_mutex);
switch (ev->event_type) {
case MPTSAS_DEL_DEVICE:
phy_info = mptsas_find_phyinfo_by_target(ioc, ev->id);
- if (!phy_info) {
- printk("mptsas: remove event for non-existant PHY.\n");
+
+ /*
+ * Sanity checks, for non-existing phys and remote rphys.
+ */
+ if (!phy_info)
break;
+ if (!phy_info->rphy)
+ break;
+ if (phy_info->starget) {
+ vtarget = phy_info->starget->hostdata;
+
+ if (!vtarget)
+ break;
+ /*
+ * Handling RAID components
+ */
+ if (ev->phys_disk_num_valid) {
+ vtarget->target_id = ev->phys_disk_num;
+ vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+ mptsas_reprobe_target(vtarget->starget, 1);
+ break;
+ }
}
if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
@@ -1327,55 +1722,74 @@ mptsas_hotplug_work(void *arg)
"removing %s device, channel %d, id %d, phy %d\n",
ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
- if (phy_info->rphy) {
- sas_rphy_delete(phy_info->rphy);
- phy_info->rphy = NULL;
- }
+ sas_rphy_delete(phy_info->rphy);
+ memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+ phy_info->rphy = NULL;
+ phy_info->starget = NULL;
break;
case MPTSAS_ADD_DEVICE:
/*
- * When there is no sas address,
- * RAID volumes are being deleted,
- * and hidden phy disk are being added.
- * We don't know the SAS data yet,
- * so lookup sas device page to get
- * pertaining info
+ * Refresh sas device pg0 data
*/
- if (!ev->sas_address) {
- if (mptsas_sas_device_pg0(ioc,
- &sas_device, ev->id,
- (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT)))
- break;
- ev->handle = sas_device.handle;
- ev->parent_handle = sas_device.handle_parent;
- ev->channel = sas_device.channel;
- ev->phy_id = sas_device.phy_id;
- ev->sas_address = sas_device.sas_address;
- ev->device_info = sas_device.device_info;
- }
+ if (mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id))
+ break;
phy_info = mptsas_find_phyinfo_by_parent(ioc,
- ev->parent_handle, ev->phy_id);
+ sas_device.handle_parent, sas_device.phy_id);
+
if (!phy_info) {
- printk("mptsas: add event for non-existant PHY.\n");
- break;
+ u32 handle = 0xFFFF;
+
+ /*
+ * Its possible when an expander has been hot added
+ * containing attached devices, the sas firmware
+ * may send a RC_ADDED event prior to the
+ * DISCOVERY STOP event. If that occurs, our
+ * view of the topology in the driver in respect to this
+ * expander might of not been setup, and we hit this
+ * condition.
+ * Therefore, this code kicks off discovery to
+ * refresh the data.
+ * Then again, we check whether the parent phy has
+ * been created.
+ */
+ ioc->sas_discovery_runtime=1;
+ mptsas_delete_expander_phys(ioc);
+ mptsas_probe_hba_phys(ioc);
+ while (!mptsas_probe_expander_phys(ioc, &handle))
+ ;
+ ioc->sas_discovery_runtime=0;
+
+ phy_info = mptsas_find_phyinfo_by_parent(ioc,
+ sas_device.handle_parent, sas_device.phy_id);
+ if (!phy_info)
+ break;
}
- if (phy_info->rphy) {
- printk("mptsas: trying to add existing device.\n");
+ if (phy_info->starget) {
+ vtarget = phy_info->starget->hostdata;
+
+ if (!vtarget)
+ break;
+ /*
+ * Handling RAID components
+ */
+ if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
+ vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+ vtarget->target_id = ev->id;
+ mptsas_reprobe_target(phy_info->starget, 0);
+ }
break;
}
- /* fill attached info */
- phy_info->attached.handle = ev->handle;
- phy_info->attached.phy_id = ev->phy_id;
- phy_info->attached.port_id = phy_info->identify.port_id;
- phy_info->attached.id = ev->id;
- phy_info->attached.channel = ev->channel;
- phy_info->attached.sas_address = ev->sas_address;
- phy_info->attached.device_info = ev->device_info;
+ if (phy_info->rphy)
+ break;
+
+ memcpy(&phy_info->attached, &sas_device,
+ sizeof(struct mptsas_devinfo));
if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
ds = "ssp";
@@ -1388,13 +1802,23 @@ mptsas_hotplug_work(void *arg)
"attaching %s device, channel %d, id %d, phy %d\n",
ioc->name, ds, ev->channel, ev->id, ev->phy_id);
-
- rphy = sas_rphy_alloc(phy_info->phy);
+ mptsas_parse_device_info(&identify, &phy_info->attached);
+ switch (identify.device_type) {
+ case SAS_END_DEVICE:
+ rphy = sas_end_device_alloc(phy_info->phy);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ rphy = sas_expander_alloc(phy_info->phy, identify.device_type);
+ break;
+ default:
+ rphy = NULL;
+ break;
+ }
if (!rphy)
break; /* non-fatal: an rphy can be added later */
- rphy->scsi_target_id = phy_info->attached.id;
- mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
+ rphy->identify = identify;
if (sas_rphy_add(rphy)) {
sas_rphy_free(rphy);
break;
@@ -1413,7 +1837,7 @@ mptsas_hotplug_work(void *arg)
break;
}
printk(MYIOC_s_INFO_FMT
- "attaching device, channel %d, id %d\n",
+ "attaching raid volume, channel %d, id %d\n",
ioc->name, ioc->num_ports, ev->id);
scsi_add_device(ioc->sh,
ioc->num_ports,
@@ -1430,7 +1854,7 @@ mptsas_hotplug_work(void *arg)
if (!sdev)
break;
printk(MYIOC_s_INFO_FMT
- "removing device, channel %d, id %d\n",
+ "removing raid volume, channel %d, id %d\n",
ioc->name, ioc->num_ports, ev->id);
scsi_remove_device(sdev);
scsi_device_put(sdev);
@@ -1439,6 +1863,7 @@ mptsas_hotplug_work(void *arg)
}
kfree(ev);
+ mutex_unlock(&ioc->sas_discovery_mutex);
}
static void
@@ -1455,35 +1880,51 @@ mptscsih_send_sas_event(MPT_ADAPTER *ioc,
MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
return;
- if ((sas_event_data->ReasonCode &
- (MPI_EVENT_SAS_DEV_STAT_RC_ADDED |
- MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING)) == 0)
- return;
+ switch (sas_event_data->ReasonCode) {
+ case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
+ case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
+ ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ break;
+ }
- ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev) {
- printk(KERN_WARNING "mptsas: lost hotplug event\n");
- return;
+ INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
+ ev->ioc = ioc;
+ ev->handle = le16_to_cpu(sas_event_data->DevHandle);
+ ev->parent_handle =
+ le16_to_cpu(sas_event_data->ParentDevHandle);
+ ev->channel = sas_event_data->Bus;
+ ev->id = sas_event_data->TargetID;
+ ev->phy_id = sas_event_data->PhyNum;
+ memcpy(&sas_address, &sas_event_data->SASAddress,
+ sizeof(__le64));
+ ev->sas_address = le64_to_cpu(sas_address);
+ ev->device_info = device_info;
+
+ if (sas_event_data->ReasonCode &
+ MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
+ ev->event_type = MPTSAS_ADD_DEVICE;
+ else
+ ev->event_type = MPTSAS_DEL_DEVICE;
+ schedule_work(&ev->work);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
+ /*
+ * Persistent table is full.
+ */
+ INIT_WORK(&ioc->mptscsih_persistTask,
+ mptscsih_sas_persist_clear_table,
+ (void *)ioc);
+ schedule_work(&ioc->mptscsih_persistTask);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+ /* TODO */
+ case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
+ /* TODO */
+ default:
+ break;
}
-
-
- INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
- ev->ioc = ioc;
- ev->handle = le16_to_cpu(sas_event_data->DevHandle);
- ev->parent_handle = le16_to_cpu(sas_event_data->ParentDevHandle);
- ev->channel = sas_event_data->Bus;
- ev->id = sas_event_data->TargetID;
- ev->phy_id = sas_event_data->PhyNum;
- memcpy(&sas_address, &sas_event_data->SASAddress, sizeof(__le64));
- ev->sas_address = le64_to_cpu(sas_address);
- ev->device_info = device_info;
-
- if (sas_event_data->ReasonCode & MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
- ev->event_type = MPTSAS_ADD_DEVICE;
- else
- ev->event_type = MPTSAS_DEL_DEVICE;
-
- schedule_work(&ev->work);
}
static void
@@ -1512,6 +1953,9 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
ev->event_type = MPTSAS_ADD_DEVICE;
break;
case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
+ ioc->raid_data.isRaid = 1;
+ ev->phys_disk_num_valid = 1;
+ ev->phys_disk_num = raid_event_data->PhysDiskNum;
ev->event_type = MPTSAS_DEL_DEVICE;
break;
case MPI_EVENT_RAID_RC_VOLUME_DELETED:
@@ -1533,15 +1977,31 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
schedule_work(&ev->work);
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* work queue thread to clear the persitency table */
static void
-mptscsih_sas_persist_clear_table(void * arg)
+mptscsih_send_discovery(MPT_ADAPTER *ioc,
+ EVENT_DATA_SAS_DISCOVERY *discovery_data)
{
- MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+ struct mptsas_discovery_event *ev;
+
+ /*
+ * DiscoveryStatus
+ *
+ * This flag will be non-zero when firmware
+ * kicks off discovery, and return to zero
+ * once its completed.
+ */
+ if (discovery_data->DiscoveryStatus)
+ return;
+
+ ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev)
+ return;
+ memset(ev,0,sizeof(struct mptsas_discovery_event));
+ INIT_WORK(&ev->work, mptscsih_discovery_work, ev);
+ ev->ioc = ioc;
+ schedule_work(&ev->work);
+};
- mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
static int
mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
@@ -1552,6 +2012,17 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
if (!ioc->sh)
goto out;
+ /*
+ * sas_discovery_ignore_events
+ *
+ * This flag is to prevent anymore processing of
+ * sas events once mptsas_remove function is called.
+ */
+ if (ioc->sas_discovery_ignore_events) {
+ rc = mptscsih_event_process(ioc, reply);
+ goto out;
+ }
+
switch (event) {
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
mptscsih_send_sas_event(ioc,
@@ -1567,6 +2038,10 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
(void *)ioc);
schedule_work(&ioc->mptscsih_persistTask);
break;
+ case MPI_EVENT_SAS_DISCOVERY:
+ mptscsih_send_discovery(ioc,
+ (EVENT_DATA_SAS_DISCOVERY *)reply->Data);
+ break;
default:
rc = mptscsih_event_process(ioc, reply);
break;
@@ -1668,7 +2143,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
INIT_LIST_HEAD(&ioc->sas_topology);
mutex_init(&ioc->sas_topology_mutex);
-
+ mutex_init(&ioc->sas_discovery_mutex);
mutex_init(&ioc->sas_mgmt.mutex);
init_completion(&ioc->sas_mgmt.done);
@@ -1781,20 +2256,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mptsas_scan_sas_topology(ioc);
- /*
- Reporting RAID volumes.
- */
- if (!ioc->raid_data.pIocPg2)
- return 0;
- if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
- return 0;
- for (ii=0;ii<ioc->raid_data.pIocPg2->NumActiveVolumes;ii++) {
- scsi_add_device(sh,
- ioc->num_ports,
- ioc->raid_data.pIocPg2->RaidVolume[ii].VolumeID,
- 0);
- }
-
return 0;
out_mptsas_probe:
@@ -1808,11 +2269,14 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct mptsas_portinfo *p, *n;
+ ioc->sas_discovery_ignore_events=1;
sas_remove_host(ioc->sh);
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
list_del(&p->list);
+ if (p->phy_info)
+ kfree(p->phy_info);
kfree(p);
}
mutex_unlock(&ioc->sas_topology_mutex);
@@ -1867,7 +2331,7 @@ mptsas_init(void)
mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
if (mpt_event_register(mptsasDoneCtx, mptsas_event_process) == 0) {
- devtprintk((KERN_INFO MYNAM
+ devtverboseprintk((KERN_INFO MYNAM
": Registered for IOC event notifications\n"));
}
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 4fee6befc93..3729062db31 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -114,21 +114,6 @@ typedef struct _internal_cmd {
u8 rsvd;
} INTERNAL_CMD;
-typedef struct _negoparms {
- u8 width;
- u8 offset;
- u8 factor;
- u8 flags;
-} NEGOPARMS;
-
-typedef struct _dv_parameters {
- NEGOPARMS max;
- NEGOPARMS now;
- u8 cmd;
- u8 id;
- u16 pad1;
-} DVPARAMETERS;
-
/*
* Other private/forward protos...
*/
@@ -149,28 +134,12 @@ static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 tar
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
-static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen);
-static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *vtarget, char byte56);
-static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags);
-static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc);
-static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags);
+static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, struct scsi_device *sdev);
+static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *vtarget, struct scsi_device *sdev);
static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus);
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
-static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
-static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
-static void mptscsih_domainValidation(void *hd);
-static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id);
-static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target);
-static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage);
-static void mptscsih_fillbuf(char *buffer, int size, int index, int width);
-static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id);
-static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc);
-#endif
void mptscsih_remove(struct pci_dev *);
void mptscsih_shutdown(struct pci_dev *);
@@ -181,16 +150,6 @@ int mptscsih_resume(struct pci_dev *pdev);
#define SNS_LEN(scp) sizeof((scp)->sense_buffer)
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-/*
- * Domain Validation task structure
- */
-static DEFINE_SPINLOCK(dvtaskQ_lock);
-static int dvtaskQ_active = 0;
-static int dvtaskQ_release = 0;
-static struct work_struct dvTaskQ_task;
-#endif
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_add_sge - Place a simple SGE at address pAddr.
@@ -687,9 +646,6 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
*/
sc->result = DID_RESET << 16;
- /* GEM Workaround. */
- if (ioc->bus_type == SPI)
- mptscsih_no_negotiate(hd, sc);
break;
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
@@ -931,7 +887,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
dsprintk(( "search_running: found (sc=%p, mf = %p) target %d, lun %d \n",
hd->ScsiLookup[ii], mf, mf->TargetID, mf->LUN[1]));
- if ((mf->TargetID != ((u8)vdevice->target_id)) || (mf->LUN[1] != ((u8) vdevice->lun)))
+ if ((mf->TargetID != ((u8)vdevice->vtarget->target_id)) || (mf->LUN[1] != ((u8) vdevice->lun)))
continue;
/* Cleanup
@@ -1005,10 +961,6 @@ mptscsih_remove(struct pci_dev *pdev)
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct Scsi_Host *host = ioc->sh;
MPT_SCSI_HOST *hd;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- int count;
- unsigned long flags;
-#endif
int sz1;
if(!host) {
@@ -1021,25 +973,6 @@ mptscsih_remove(struct pci_dev *pdev)
if((hd = (MPT_SCSI_HOST *)host->hostdata) == NULL)
return;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- /* Check DV thread active */
- count = 10 * HZ;
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- if (dvtaskQ_active) {
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- while(dvtaskQ_active && --count)
- schedule_timeout_interruptible(1);
- } else {
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- }
- if (!count)
- printk(KERN_ERR MYNAM ": ERROR - DV thread still active!\n");
-#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY)
- else
- printk(KERN_ERR MYNAM ": DV thread orig %d, count %d\n", 10 * HZ, count);
-#endif
-#endif
-
mptscsih_shutdown(pdev);
sz1=0;
@@ -1127,21 +1060,6 @@ mptscsih_resume(struct pci_dev *pdev)
if(!hd)
return 0;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- {
- unsigned long lflags;
- spin_lock_irqsave(&dvtaskQ_lock, lflags);
- if (!dvtaskQ_active) {
- dvtaskQ_active = 1;
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- INIT_WORK(&dvTaskQ_task,
- mptscsih_domainValidation, (void *) hd);
- schedule_work(&dvTaskQ_task);
- } else {
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- }
- }
-#endif
return 0;
}
@@ -1317,6 +1235,14 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
return SCSI_MLQUEUE_HOST_BUSY;
}
+ if ((hd->ioc->bus_type == SPI) &&
+ vdev->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT &&
+ mptscsih_raid_id_to_num(hd, SCpnt->device->id) < 0) {
+ SCpnt->result = DID_NO_CONNECT << 16;
+ done(SCpnt);
+ return 0;
+ }
+
/*
* Put together a MPT SCSI request...
*/
@@ -1360,10 +1286,13 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
/* Use the above information to set up the message frame
*/
- pScsiReq->TargetID = (u8) vdev->target_id;
- pScsiReq->Bus = vdev->bus_id;
+ pScsiReq->TargetID = (u8) vdev->vtarget->target_id;
+ pScsiReq->Bus = vdev->vtarget->bus_id;
pScsiReq->ChainOffset = 0;
- pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
+ if (vdev->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+ pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
+ else
+ pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
pScsiReq->CDBLength = SCpnt->cmd_len;
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
pScsiReq->Reserved = 0;
@@ -1411,49 +1340,6 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
hd->ScsiLookup[my_idx] = SCpnt;
SCpnt->host_scribble = NULL;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- if (hd->ioc->bus_type == SPI) {
- int dvStatus = hd->ioc->spi_data.dvStatus[vdev->target_id];
- int issueCmd = 1;
-
- if (dvStatus || hd->ioc->spi_data.forceDv) {
-
- if ((dvStatus & MPT_SCSICFG_NEED_DV) ||
- (hd->ioc->spi_data.forceDv & MPT_SCSICFG_NEED_DV)) {
- unsigned long lflags;
- /* Schedule DV if necessary */
- spin_lock_irqsave(&dvtaskQ_lock, lflags);
- if (!dvtaskQ_active) {
- dvtaskQ_active = 1;
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- INIT_WORK(&dvTaskQ_task, mptscsih_domainValidation, (void *) hd);
-
- schedule_work(&dvTaskQ_task);
- } else {
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- }
- hd->ioc->spi_data.forceDv &= ~MPT_SCSICFG_NEED_DV;
- }
-
- /* Trying to do DV to this target, extend timeout.
- * Wait to issue until flag is clear
- */
- if (dvStatus & MPT_SCSICFG_DV_PENDING) {
- mod_timer(&SCpnt->eh_timeout, jiffies + 40 * HZ);
- issueCmd = 0;
- }
-
- /* Set the DV flags.
- */
- if (dvStatus & MPT_SCSICFG_DV_NOT_DONE)
- mptscsih_set_dvflags(hd, SCpnt);
-
- if (!issueCmd)
- goto fail;
- }
- }
-#endif
-
mpt_put_msg_frame(hd->ioc->DoneCtx, hd->ioc, mf);
dmfprintk((MYIOC_s_INFO_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
hd->ioc->name, SCpnt, mf, my_idx));
@@ -1816,7 +1702,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
- vdev->bus_id, vdev->target_id, vdev->lun,
+ vdev->vtarget->bus_id, vdev->vtarget->target_id, vdev->lun,
ctx2abort, mptscsih_get_tm_timeout(ioc));
printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
@@ -1867,7 +1753,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
- vdev->bus_id, vdev->target_id,
+ vdev->vtarget->bus_id, vdev->vtarget->target_id,
0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
@@ -1918,7 +1804,7 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- vdev->bus_id, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));
+ vdev->vtarget->bus_id, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
hd->ioc->name,
@@ -2218,6 +2104,42 @@ mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
return 0;
}
+/* Search IOC page 3 to determine if this is hidden physical disk
+ *
+ */
+int
+mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
+{
+ int i;
+
+ if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
+ return 0;
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
+ return 1;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(mptscsih_is_phys_disk);
+
+int
+mptscsih_raid_id_to_num(MPT_SCSI_HOST *hd, uint physdiskid)
+{
+ int i;
+
+ if (!hd->ioc->raid_data.isRaid || !hd->ioc->raid_data.pIocPg3)
+ return -ENXIO;
+
+ for (i = 0; i < hd->ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ if (physdiskid ==
+ hd->ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
+ return hd->ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
+ }
+
+ return -ENXIO;
+}
+EXPORT_SYMBOL(mptscsih_raid_id_to_num);
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* OS entry point to allow host driver to alloc memory
@@ -2233,6 +2155,7 @@ mptscsih_target_alloc(struct scsi_target *starget)
if (!vtarget)
return -ENOMEM;
starget->hostdata = vtarget;
+ vtarget->starget = starget;
return 0;
}
@@ -2258,14 +2181,12 @@ mptscsih_slave_alloc(struct scsi_device *sdev)
return -ENOMEM;
}
- vdev->ioc_id = hd->ioc->id;
- vdev->target_id = sdev->id;
- vdev->bus_id = sdev->channel;
vdev->lun = sdev->lun;
sdev->hostdata = vdev;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
+
vdev->vtarget = vtarget;
if (vtarget->num_luns == 0) {
@@ -2274,14 +2195,11 @@ mptscsih_slave_alloc(struct scsi_device *sdev)
vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
vtarget->target_id = sdev->id;
vtarget->bus_id = sdev->channel;
- if (hd->ioc->bus_type == SPI) {
- if (hd->ioc->raid_data.isRaid & (1 << sdev->id)) {
- vtarget->raidVolume = 1;
- ddvtprintk((KERN_INFO
+ if (hd->ioc->bus_type == SPI && sdev->channel == 0 &&
+ hd->ioc->raid_data.isRaid & (1 << sdev->id)) {
+ vtarget->raidVolume = 1;
+ ddvtprintk((KERN_INFO
"RAID Volume @ id %d\n", sdev->id));
- }
- } else {
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
}
}
vtarget->num_luns++;
@@ -2321,19 +2239,6 @@ mptscsih_slave_destroy(struct scsi_device *sdev)
vtarget->luns[0] &= ~(1 << vdevice->lun);
vtarget->num_luns--;
if (vtarget->num_luns == 0) {
- mptscsih_negotiate_to_asyn_narrow(hd, vdevice);
- if (hd->ioc->bus_type == SPI) {
- if (mptscsih_is_phys_disk(hd->ioc, vtarget->target_id)) {
- hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
- } else {
- hd->ioc->spi_data.dvStatus[vtarget->target_id] =
- MPT_SCSICFG_NEGOTIATE;
- if (!hd->negoNvram) {
- hd->ioc->spi_data.dvStatus[vtarget->target_id] |=
- MPT_SCSICFG_DV_NOT_DONE;
- }
- }
- }
hd->Targets[sdev->id] = NULL;
}
mptscsih_synchronize_cache(hd, vdevice);
@@ -2362,18 +2267,13 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
vtarget = starget->hostdata;
if (hd->ioc->bus_type == SPI) {
- if (vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) {
- if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
- max_depth = 1;
- else if (((vtarget->inq_data[0] & 0x1f) == 0x00) &&
- (vtarget->minSyncFactor <= MPT_ULTRA160 ))
- max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
- else
- max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
- } else {
- /* error case - No Inq. Data */
+ if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
max_depth = 1;
- }
+ else if (sdev->type == TYPE_DISK &&
+ vtarget->minSyncFactor <= MPT_ULTRA160)
+ max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
+ else
+ max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
} else
max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
@@ -2427,8 +2327,7 @@ mptscsih_slave_configure(struct scsi_device *sdev)
lun_index = (vdevice->lun >> 5); /* 32 luns per lun_index */
indexed_lun = (vdevice->lun % 32);
vtarget->luns[lun_index] |= (1 << indexed_lun);
- mptscsih_initTarget(hd, vtarget, sdev->lun, sdev->inquiry,
- sdev->inquiry_len );
+ mptscsih_initTarget(hd, vtarget, sdev);
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
dsprintk((MYIOC_s_INFO_FMT
@@ -2597,10 +2496,6 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
/* 4. Renegotiate to all devices, if SPI
*/
- if (ioc->bus_type == SPI) {
- dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n"));
- mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM);
- }
/* 5. Enable new commands to be posted
*/
@@ -2624,13 +2519,6 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
hd->cmdPtr = NULL;
}
- /* 7. SPI: Set flag to force DV and re-read IOC Page 3
- */
- if (ioc->bus_type == SPI) {
- ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
- ddvtprintk(("Set reload IOC Pg3 Flag\n"));
- }
-
/* 7. FC: Rescan for blocked rports which might have returned.
*/
else if (ioc->bus_type == FC) {
@@ -2659,7 +2547,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
int work_count;
unsigned long flags;
- devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
+ devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
ioc->name, event));
if (ioc->sh == NULL ||
@@ -2699,18 +2587,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
break;
case MPI_EVENT_INTEGRATED_RAID: /* 0B */
- {
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- pMpiEventDataRaid_t pRaidEventData =
- (pMpiEventDataRaid_t) pEvReply->Data;
- /* Domain Validation Needed */
- if (ioc->bus_type == SPI &&
- pRaidEventData->ReasonCode ==
- MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED)
- mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum);
-#endif
break;
- }
case MPI_EVENT_NONE: /* 00 */
case MPI_EVENT_LOG_DATA: /* 01 */
@@ -2729,9 +2606,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
* mptscsih_initTarget - Target, LUN alloc/free functionality.
* @hd: Pointer to MPT_SCSI_HOST structure
* @vtarget: per target private data
- * @lun: SCSI LUN id
- * @data: Pointer to data
- * @dlen: Number of INQUIRY bytes
+ * @sdev: SCSI device
*
* NOTE: It's only SAFE to call this routine if data points to
* sane & valid STANDARD INQUIRY data!
@@ -2741,98 +2616,46 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
*
*/
static void
-mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen)
+mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
+ struct scsi_device *sdev)
{
- SpiCfgData *pSpi;
- char data_56;
- int inq_len;
-
dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd));
- /*
- * If the peripheral qualifier filter is enabled then if the target reports a 0x1
- * (i.e. The targer is capable of supporting the specified peripheral device type
- * on this logical unit; however, the physical device is not currently connected
- * to this logical unit) it will be converted to a 0x3 (i.e. The target is not
- * capable of supporting a physical device on this logical unit). This is to work
- * around a bug in th emid-layer in some distributions in which the mid-layer will
- * continue to try to communicate to the LUN and evntually create a dummy LUN.
- */
- if (hd->mpt_pq_filter && dlen && (data[0] & 0xE0))
- data[0] |= 0x40;
-
/* Is LUN supported? If so, upper 2 bits will be 0
* in first byte of inquiry data.
*/
- if (data[0] & 0xe0)
+ if (sdev->inq_periph_qual != 0)
return;
if (vtarget == NULL)
return;
- if (data)
- vtarget->type = data[0];
+ vtarget->type = sdev->type;
if (hd->ioc->bus_type != SPI)
return;
- if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
+ if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
/* Treat all Processors as SAF-TE if
* command line option is set */
vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id);
- }else if ((data[0] == TYPE_PROCESSOR) &&
+ }else if ((sdev->type == TYPE_PROCESSOR) &&
!(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
- if ( dlen > 49 ) {
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
- if ( data[44] == 'S' &&
- data[45] == 'A' &&
- data[46] == 'F' &&
- data[47] == '-' &&
- data[48] == 'T' &&
- data[49] == 'E' ) {
+ if (sdev->inquiry_len > 49 ) {
+ if (sdev->inquiry[44] == 'S' &&
+ sdev->inquiry[45] == 'A' &&
+ sdev->inquiry[46] == 'F' &&
+ sdev->inquiry[47] == '-' &&
+ sdev->inquiry[48] == 'T' &&
+ sdev->inquiry[49] == 'E' ) {
vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id);
}
}
}
- if (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) {
- inq_len = dlen < 8 ? dlen : 8;
- memcpy (vtarget->inq_data, data, inq_len);
- /* If have not done DV, set the DV flag.
- */
- pSpi = &hd->ioc->spi_data;
- if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) {
- if (pSpi->dvStatus[vtarget->target_id] & MPT_SCSICFG_DV_NOT_DONE)
- pSpi->dvStatus[vtarget->target_id] |= MPT_SCSICFG_NEED_DV;
- }
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
-
- data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */
- if (dlen > 56) {
- if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) {
- /* Update the target capabilities
- */
- data_56 = data[56];
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56;
- }
- }
- mptscsih_setTargetNegoParms(hd, vtarget, data_56);
- } else {
- /* Initial Inquiry may not request enough data bytes to
- * obtain byte 57. DV will; if target doesn't return
- * at least 57 bytes, data[56] will be zero. */
- if (dlen > 56) {
- if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) {
- /* Update the target capabilities
- */
- data_56 = data[56];
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56;
- mptscsih_setTargetNegoParms(hd, vtarget, data_56);
- }
- }
- }
+ mptscsih_setTargetNegoParms(hd, vtarget, sdev);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2842,66 +2665,51 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data,
*
*/
static void
-mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, char byte56)
+mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
+ struct scsi_device *sdev)
{
SpiCfgData *pspi_data = &hd->ioc->spi_data;
int id = (int) target->target_id;
int nvram;
- VirtTarget *vtarget;
- int ii;
u8 width = MPT_NARROW;
u8 factor = MPT_ASYNC;
u8 offset = 0;
- u8 version, nfactor;
+ u8 nfactor;
u8 noQas = 1;
target->negoFlags = pspi_data->noQas;
- /* noQas == 0 => device supports QAS. Need byte 56 of Inq to determine
- * support. If available, default QAS to off and allow enabling.
- * If not available, default QAS to on, turn off for non-disks.
- */
+ /* noQas == 0 => device supports QAS. */
- /* Set flags based on Inquiry data
- */
- version = target->inq_data[2] & 0x07;
- if (version < 2) {
+ if (sdev->scsi_level < SCSI_2) {
width = 0;
factor = MPT_ULTRA2;
offset = pspi_data->maxSyncOffset;
target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
} else {
- if (target->inq_data[7] & 0x20) {
+ if (scsi_device_wide(sdev)) {
width = 1;
}
- if (target->inq_data[7] & 0x10) {
+ if (scsi_device_sync(sdev)) {
factor = pspi_data->minSyncFactor;
- if (target->tflags & MPT_TARGET_FLAGS_VALID_56) {
- /* bits 2 & 3 show Clocking support */
- if ((byte56 & 0x0C) == 0)
+ if (!scsi_device_dt(sdev))
factor = MPT_ULTRA2;
+ else {
+ if (!scsi_device_ius(sdev) &&
+ !scsi_device_qas(sdev))
+ factor = MPT_ULTRA160;
else {
- if ((byte56 & 0x03) == 0)
- factor = MPT_ULTRA160;
- else {
- factor = MPT_ULTRA320;
- if (byte56 & 0x02)
- {
- ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
- noQas = 0;
- }
- if (target->inq_data[0] == TYPE_TAPE) {
- if (byte56 & 0x01)
- target->negoFlags |= MPT_TAPE_NEGO_IDP;
- }
+ factor = MPT_ULTRA320;
+ if (scsi_device_qas(sdev)) {
+ ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
+ noQas = 0;
}
+ if (sdev->type == TYPE_TAPE &&
+ scsi_device_ius(sdev))
+ target->negoFlags |= MPT_TAPE_NEGO_IDP;
}
- } else {
- ddvtprintk((KERN_INFO "Enabling QAS on id=%d due to ~TARGET_FLAGS_VALID_56!\n", id));
- noQas = 0;
}
-
offset = pspi_data->maxSyncOffset;
/* If RAID, never disable QAS
@@ -2919,7 +2727,7 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, char byte56)
}
}
- if ( (target->inq_data[7] & 0x02) == 0) {
+ if (!sdev->tagged_supported) {
target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
}
@@ -2977,305 +2785,23 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, char byte56)
if ( factor > MPT_ULTRA320 )
noQas = 0;
- /* GEM, processor WORKAROUND
- */
- if ((target->inq_data[0] == TYPE_PROCESSOR) || (target->inq_data[0] > 0x08)) {
- target->negoFlags |= (MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC);
- pspi_data->dvStatus[id] |= MPT_SCSICFG_BLK_NEGO;
- } else {
- if (noQas && (pspi_data->noQas == 0)) {
- pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
- target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
-
- /* Disable QAS in a mixed configuration case
- */
-
- ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
- for (ii = 0; ii < id; ii++) {
- if ( (vtarget = hd->Targets[ii]) ) {
- vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
- mptscsih_writeSDP1(hd, 0, ii, vtarget->negoFlags);
- }
- }
- }
- }
+ if (noQas && (pspi_data->noQas == 0)) {
+ pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
+ target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
+
+ /* Disable QAS in a mixed configuration case
+ */
- /* Write SDP1 on this I/O to this target */
- if (pspi_data->dvStatus[id] & MPT_SCSICFG_NEGOTIATE) {
- ddvtprintk((KERN_INFO "MPT_SCSICFG_NEGOTIATE on id=%d!\n", id));
- mptscsih_writeSDP1(hd, 0, id, hd->negoNvram);
- pspi_data->dvStatus[id] &= ~MPT_SCSICFG_NEGOTIATE;
- } else if (pspi_data->dvStatus[id] & MPT_SCSICFG_BLK_NEGO) {
- ddvtprintk((KERN_INFO "MPT_SCSICFG_BLK_NEGO on id=%d!\n", id));
- mptscsih_writeSDP1(hd, 0, id, MPT_SCSICFG_BLK_NEGO);
- pspi_data->dvStatus[id] &= ~MPT_SCSICFG_BLK_NEGO;
+ ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * If no Target, bus reset on 1st I/O. Set the flag to
- * prevent any future negotiations to this device.
- */
-static void
-mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc)
-{
- VirtDevice *vdev;
-
- if ((vdev = sc->device->hostdata) != NULL)
- hd->ioc->spi_data.dvStatus[vdev->target_id] |= MPT_SCSICFG_BLK_NEGO;
- return;
-}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* SCSI Config Page functionality ...
*/
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_setDevicePage1Flags - add Requested and Configuration fields flags
- * based on width, factor and offset parameters.
- * @width: bus width
- * @factor: sync factor
- * @offset: sync offset
- * @requestedPtr: pointer to requested values (updated)
- * @configurationPtr: pointer to configuration values (updated)
- * @flags: flags to block WDTR or SDTR negotiation
- *
- * Return: None.
- *
- * Remark: Called by writeSDP1 and _dv_params
- */
-static void
-mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags)
-{
- u8 nowide = flags & MPT_TARGET_NO_NEGO_WIDE;
- u8 nosync = flags & MPT_TARGET_NO_NEGO_SYNC;
-
- *configurationPtr = 0;
- *requestedPtr = width ? MPI_SCSIDEVPAGE1_RP_WIDE : 0;
- *requestedPtr |= (offset << 16) | (factor << 8);
-
- if (width && offset && !nowide && !nosync) {
- if (factor < MPT_ULTRA160) {
- *requestedPtr |= (MPI_SCSIDEVPAGE1_RP_IU + MPI_SCSIDEVPAGE1_RP_DT);
- if ((flags & MPT_TARGET_NO_NEGO_QAS) == 0)
- *requestedPtr |= MPI_SCSIDEVPAGE1_RP_QAS;
- if (flags & MPT_TAPE_NEGO_IDP)
- *requestedPtr |= 0x08000000;
- } else if (factor < MPT_ULTRA2) {
- *requestedPtr |= MPI_SCSIDEVPAGE1_RP_DT;
- }
- }
-
- if (nowide)
- *configurationPtr |= MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED;
-
- if (nosync)
- *configurationPtr |= MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED;
-
- return;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_writeSDP1 - write SCSI Device Page 1
- * @hd: Pointer to a SCSI Host Strucutre
- * @portnum: IOC port number
- * @target_id: writeSDP1 for single ID
- * @flags: MPT_SCSICFG_ALL_IDS, MPT_SCSICFG_USE_NVRAM, MPT_SCSICFG_BLK_NEGO
- *
- * Return: -EFAULT if read of config page header fails
- * or 0 if success.
- *
- * Remark: If a target has been found, the settings from the
- * target structure are used, else the device is set
- * to async/narrow.
- *
- * Remark: Called during init and after a FW reload.
- * Remark: We do not wait for a return, write pages sequentially.
- */
-static int
-mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- Config_t *pReq;
- SCSIDevicePage1_t *pData;
- VirtTarget *vtarget=NULL;
- MPT_FRAME_HDR *mf;
- dma_addr_t dataDma;
- u16 req_idx;
- u32 frameOffset;
- u32 requested, configuration, flagsLength;
- int ii, nvram;
- int id = 0, maxid = 0;
- u8 width;
- u8 factor;
- u8 offset;
- u8 bus = 0;
- u8 negoFlags;
- u8 maxwidth, maxoffset, maxfactor;
-
- if (ioc->spi_data.sdp1length == 0)
- return 0;
-
- if (flags & MPT_SCSICFG_ALL_IDS) {
- id = 0;
- maxid = ioc->sh->max_id - 1;
- } else if (ioc->sh) {
- id = target_id;
- maxid = min_t(int, id, ioc->sh->max_id - 1);
- }
-
- for (; id <= maxid; id++) {
-
- if (id == ioc->pfacts[portnum].PortSCSIID)
- continue;
-
- /* Use NVRAM to get adapter and target maximums
- * Data over-riden by target structure information, if present
- */
- maxwidth = ioc->spi_data.maxBusWidth;
- maxoffset = ioc->spi_data.maxSyncOffset;
- maxfactor = ioc->spi_data.minSyncFactor;
- if (ioc->spi_data.nvram && (ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- nvram = ioc->spi_data.nvram[id];
-
- if (maxwidth)
- maxwidth = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
-
- if (maxoffset > 0) {
- maxfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
- if (maxfactor == 0) {
- /* Key for async */
- maxfactor = MPT_ASYNC;
- maxoffset = 0;
- } else if (maxfactor < ioc->spi_data.minSyncFactor) {
- maxfactor = ioc->spi_data.minSyncFactor;
- }
- } else
- maxfactor = MPT_ASYNC;
- }
-
- /* Set the negotiation flags.
- */
- negoFlags = ioc->spi_data.noQas;
- if (!maxwidth)
- negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
-
- if (!maxoffset)
- negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
-
- if (flags & MPT_SCSICFG_USE_NVRAM) {
- width = maxwidth;
- factor = maxfactor;
- offset = maxoffset;
- } else {
- width = 0;
- factor = MPT_ASYNC;
- offset = 0;
- //negoFlags = 0;
- //negoFlags = MPT_TARGET_NO_NEGO_SYNC;
- }
-
- /* If id is not a raid volume, get the updated
- * transmission settings from the target structure.
- */
- if (hd->Targets && (vtarget = hd->Targets[id]) && !vtarget->raidVolume) {
- width = vtarget->maxWidth;
- factor = vtarget->minSyncFactor;
- offset = vtarget->maxOffset;
- negoFlags = vtarget->negoFlags;
- }
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- /* Force to async and narrow if DV has not been executed
- * for this ID
- */
- if ((hd->ioc->spi_data.dvStatus[id] & MPT_SCSICFG_DV_NOT_DONE) != 0) {
- width = 0;
- factor = MPT_ASYNC;
- offset = 0;
- }
-#endif
-
- if (flags & MPT_SCSICFG_BLK_NEGO)
- negoFlags |= MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC;
-
- mptscsih_setDevicePage1Flags(width, factor, offset,
- &requested, &configuration, negoFlags);
- dnegoprintk(("writeSDP1: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
- target_id, width, factor, offset, negoFlags, requested, configuration));
-
- /* Get a MF for this command.
- */
- if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dfailprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
-
- ddvprintk((MYIOC_s_INFO_FMT "WriteSDP1 (mf=%p, id=%d, req=0x%x, cfg=0x%x)\n",
- hd->ioc->name, mf, id, requested, configuration));
-
-
- /* Set the request and the data pointers.
- * Request takes: 36 bytes (32 bit SGE)
- * SCSI Device Page 1 requires 16 bytes
- * 40 + 16 <= size of SCSI IO Request = 56 bytes
- * and MF size >= 64 bytes.
- * Place data at end of MF.
- */
- pReq = (Config_t *)mf;
-
- req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- frameOffset = ioc->req_sz - sizeof(SCSIDevicePage1_t);
-
- pData = (SCSIDevicePage1_t *)((u8 *) mf + frameOffset);
- dataDma = ioc->req_frames_dma + (req_idx * ioc->req_sz) + frameOffset;
-
- /* Complete the request frame (same for all requests).
- */
- pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_CONFIG;
- pReq->ExtPageLength = 0;
- pReq->ExtPageType = 0;
- pReq->MsgFlags = 0;
- for (ii=0; ii < 8; ii++) {
- pReq->Reserved2[ii] = 0;
- }
- pReq->Header.PageVersion = ioc->spi_data.sdp1version;
- pReq->Header.PageLength = ioc->spi_data.sdp1length;
- pReq->Header.PageNumber = 1;
- pReq->Header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- pReq->PageAddress = cpu_to_le32(id | (bus << 8 ));
-
- /* Add a SGE to the config request.
- */
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | ioc->spi_data.sdp1length * 4;
-
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
-
- /* Set up the common data portion
- */
- pData->Header.PageVersion = pReq->Header.PageVersion;
- pData->Header.PageLength = pReq->Header.PageLength;
- pData->Header.PageNumber = pReq->Header.PageNumber;
- pData->Header.PageType = pReq->Header.PageType;
- pData->RequestedParameters = cpu_to_le32(requested);
- pData->Reserved = 0;
- pData->Configuration = cpu_to_le32(configuration);
-
- dprintk((MYIOC_s_INFO_FMT
- "write SDP1: id %d pgaddr 0x%x req 0x%x config 0x%x\n",
- ioc->name, id, (id | (bus<<8)),
- requested, configuration));
-
- mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
- }
-
- return 0;
-}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* mptscsih_writeIOCPage4 - write IOC Page 4
@@ -3465,6 +2991,7 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
completionCode = MPT_SCANDV_GOOD;
else
completionCode = MPT_SCANDV_SOME_ERROR;
+ memcpy(hd->pLocal->sense, pr, sizeof(hd->pLocal->sense));
} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
u8 *sense_data;
@@ -3578,78 +3105,6 @@ mptscsih_timer_expired(unsigned long data)
return;
}
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_do_raid - Format and Issue a RAID volume request message.
- * @hd: Pointer to scsi host structure
- * @action: What do be done.
- * @id: Logical target id.
- * @bus: Target locations bus.
- *
- * Returns: < 0 on a fatal error
- * 0 on success
- *
- * Remark: Wait to return until reply processed by the ISR.
- */
-static int
-mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io)
-{
- MpiRaidActionRequest_t *pReq;
- MPT_FRAME_HDR *mf;
- int in_isr;
-
- in_isr = in_interrupt();
- if (in_isr) {
- dprintk((MYIOC_s_WARN_FMT "Internal raid request not allowed in ISR context!\n",
- hd->ioc->name));
- return -EPERM;
- }
-
- /* Get and Populate a free Frame
- */
- if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
- ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
- hd->ioc->name));
- return -EAGAIN;
- }
- pReq = (MpiRaidActionRequest_t *)mf;
- pReq->Action = action;
- pReq->Reserved1 = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_RAID_ACTION;
- pReq->VolumeID = io->id;
- pReq->VolumeBus = io->bus;
- pReq->PhysDiskNum = io->physDiskNum;
- pReq->MsgFlags = 0;
- pReq->Reserved2 = 0;
- pReq->ActionDataWord = 0; /* Reserved for this action */
- //pReq->ActionDataSGE = 0;
-
- mpt_add_sge((char *)&pReq->ActionDataSGE,
- MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
-
- ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n",
- hd->ioc->name, action, io->id));
-
- hd->pLocal = NULL;
- hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
- hd->scandv_wait_done = 0;
-
- /* Save cmd pointer, for resource free if timeout or
- * FW reload occurs
- */
- hd->cmdPtr = mf;
-
- add_timer(&hd->timer);
- mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
- wait_event(hd->scandv_waitq, hd->scandv_wait_done);
-
- if ((hd->pLocal == NULL) || (hd->pLocal->completion != MPT_SCANDV_GOOD))
- return -1;
-
- return 0;
-}
-#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
@@ -3903,93 +3358,6 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mptscsih_negotiate_to_asyn_narrow - Restore devices to default state
- * @hd: Pointer to a SCSI HOST structure
- * @vtarget: per device private data
- *
- * Uses the ISR, but with special processing.
- * MUST be single-threaded.
- *
- */
-static void
-mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
-{
- VirtTarget *vtarget = vdevice->vtarget;
- MPT_ADAPTER *ioc= hd->ioc;
- SCSIDevicePage1_t *pcfg1Data;
- CONFIGPARMS cfg;
- dma_addr_t cfg1_dma_addr;
- ConfigPageHeader_t header;
- int id;
- int requested, configuration, data,i;
- u8 flags, factor;
-
- if ((ioc->bus_type != SPI) ||
- (!vdevice->configured_lun))
- return;
-
- if (!ioc->spi_data.sdp1length)
- return;
-
- pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev,
- ioc->spi_data.sdp1length * 4, &cfg1_dma_addr);
-
- if (pcfg1Data == NULL)
- return;
-
- header.PageVersion = ioc->spi_data.sdp1version;
- header.PageLength = ioc->spi_data.sdp1length;
- header.PageNumber = 1;
- header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.cfghdr.hdr = &header;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- cfg.timeout = 0;
-
- if (vtarget->raidVolume && ioc->raid_data.pIocPg3) {
- for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
- id = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID;
- flags = hd->ioc->spi_data.noQas;
- if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- data = hd->ioc->spi_data.nvram[id];
- if (data & MPT_NVRAM_WIDE_DISABLE)
- flags |= MPT_TARGET_NO_NEGO_WIDE;
- factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
- if ((factor == 0) || (factor == MPT_ASYNC))
- flags |= MPT_TARGET_NO_NEGO_SYNC;
- }
- mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
- &configuration, flags);
- dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC "
- "offset=0 negoFlags=%x request=%x config=%x\n",
- id, flags, requested, configuration));
- pcfg1Data->RequestedParameters = cpu_to_le32(requested);
- pcfg1Data->Reserved = 0;
- pcfg1Data->Configuration = cpu_to_le32(configuration);
- cfg.pageAddr = (vtarget->bus_id<<8) | id;
- mpt_config(hd->ioc, &cfg);
- }
- } else {
- flags = vtarget->negoFlags;
- mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
- &configuration, flags);
- dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC "
- "offset=0 negoFlags=%x request=%x config=%x\n",
- vtarget->target_id, flags, requested, configuration));
- pcfg1Data->RequestedParameters = cpu_to_le32(requested);
- pcfg1Data->Reserved = 0;
- pcfg1Data->Configuration = cpu_to_le32(configuration);
- cfg.pageAddr = (vtarget->bus_id<<8) | vtarget->target_id;
- mpt_config(hd->ioc, &cfg);
- }
-
- if (pcfg1Data)
- pci_free_consistent(ioc->pcidev, header.PageLength * 4, pcfg1Data, cfg1_dma_addr);
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
* mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
* @hd: Pointer to a SCSI HOST structure
* @vtarget: per device private data
@@ -4014,1637 +3382,15 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
iocmd.data_dma = -1;
iocmd.size = 0;
iocmd.rsvd = iocmd.rsvd2 = 0;
- iocmd.bus = vdevice->bus_id;
- iocmd.id = vdevice->target_id;
+ iocmd.bus = vdevice->vtarget->bus_id;
+ iocmd.id = vdevice->vtarget->target_id;
iocmd.lun = (u8)vdevice->lun;
- if ((vdevice->vtarget->type & TYPE_DISK) &&
+ if ((vdevice->vtarget->type == TYPE_DISK) &&
(vdevice->configured_lun))
mptscsih_do_cmd(hd, &iocmd);
}
-/* Search IOC page 3 to determine if this is hidden physical disk
- */
-static int
-mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
-{
- int i;
-
- if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
- return 0;
-
- for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
- if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
- return 1;
- }
-
- return 0;
-}
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_domainValidation - Top level handler for domain validation.
- * @hd: Pointer to MPT_SCSI_HOST structure.
- *
- * Uses the ISR, but with special processing.
- * Called from schedule, should not be in interrupt mode.
- * While thread alive, do dv for all devices needing dv
- *
- * Return: None.
- */
-static void
-mptscsih_domainValidation(void *arg)
-{
- MPT_SCSI_HOST *hd;
- MPT_ADAPTER *ioc;
- unsigned long flags;
- int id, maxid, dvStatus, did;
- int ii, isPhysDisk;
-
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- dvtaskQ_active = 1;
- if (dvtaskQ_release) {
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
-
- /* For this ioc, loop through all devices and do dv to each device.
- * When complete with this ioc, search through the ioc list, and
- * for each scsi ioc found, do dv for all devices. Exit when no
- * device needs dv.
- */
- did = 1;
- while (did) {
- did = 0;
- list_for_each_entry(ioc, &ioc_list, list) {
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- if (dvtaskQ_release) {
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
-
- msleep(250);
-
- /* DV only to SPI adapters */
- if (ioc->bus_type != SPI)
- continue;
-
- /* Make sure everything looks ok */
- if (ioc->sh == NULL)
- continue;
-
- hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
- if (hd == NULL)
- continue;
-
- if ((ioc->spi_data.forceDv & MPT_SCSICFG_RELOAD_IOC_PG3) != 0) {
- mpt_read_ioc_pg_3(ioc);
- if (ioc->raid_data.pIocPg3) {
- Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- if (ioc->spi_data.dvStatus[pPDisk->PhysDiskID] & MPT_SCSICFG_DV_NOT_DONE)
- ioc->spi_data.dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
-
- pPDisk++;
- numPDisk--;
- }
- }
- ioc->spi_data.forceDv &= ~MPT_SCSICFG_RELOAD_IOC_PG3;
- }
-
- maxid = min_t(int, ioc->sh->max_id, MPT_MAX_SCSI_DEVICES);
-
- for (id = 0; id < maxid; id++) {
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- if (dvtaskQ_release) {
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- dvStatus = hd->ioc->spi_data.dvStatus[id];
-
- if (dvStatus & MPT_SCSICFG_NEED_DV) {
- did++;
- hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_DV_PENDING;
- hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_NEED_DV;
-
- msleep(250);
-
- /* If hidden phys disk, block IO's to all
- * raid volumes
- * else, process normally
- */
- isPhysDisk = mptscsih_is_phys_disk(ioc, id);
- if (isPhysDisk) {
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (hd->ioc->raid_data.isRaid & (1 << ii)) {
- hd->ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_DV_PENDING;
- }
- }
- }
-
- if(mpt_alt_ioc_wait(hd->ioc)!=0) {
- ddvprintk((MYIOC_s_WARN_FMT "alt_ioc busy!\n",
- hd->ioc->name));
- continue;
- }
-
- if (mptscsih_doDv(hd, 0, id) == 1) {
- /* Untagged device was busy, try again
- */
- hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_NEED_DV;
- hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_PENDING;
- } else {
- /* DV is complete. Clear flags.
- */
- hd->ioc->spi_data.dvStatus[id] &= ~(MPT_SCSICFG_DV_NOT_DONE | MPT_SCSICFG_DV_PENDING);
- }
-
- spin_lock(&hd->ioc->initializing_hba_lock);
- hd->ioc->initializing_hba_lock_flag=0;
- spin_unlock(&hd->ioc->initializing_hba_lock);
-
- if (isPhysDisk) {
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (hd->ioc->raid_data.isRaid & (1 << ii)) {
- hd->ioc->spi_data.dvStatus[ii] &= ~MPT_SCSICFG_DV_PENDING;
- }
- }
- }
-
- if (hd->ioc->spi_data.noQas)
- mptscsih_qas_check(hd, id);
- }
- }
- }
- }
-
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
-
- return;
-}
-
-/* Write SDP1 if no QAS has been enabled
- */
-static void
-mptscsih_qas_check(MPT_SCSI_HOST *hd, int id)
-{
- VirtTarget *vtarget;
- int ii;
-
- if (hd->Targets == NULL)
- return;
-
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (ii == id)
- continue;
-
- if ((hd->ioc->spi_data.dvStatus[ii] & MPT_SCSICFG_DV_NOT_DONE) != 0)
- continue;
-
- vtarget = hd->Targets[ii];
-
- if ((vtarget != NULL) && (!vtarget->raidVolume)) {
- if ((vtarget->negoFlags & hd->ioc->spi_data.noQas) == 0) {
- vtarget->negoFlags |= hd->ioc->spi_data.noQas;
- dnegoprintk(("writeSDP1: id=%d flags=0\n", id));
- mptscsih_writeSDP1(hd, 0, ii, 0);
- }
- } else {
- if (mptscsih_is_phys_disk(hd->ioc, ii) == 1) {
- dnegoprintk(("writeSDP1: id=%d SCSICFG_USE_NVRAM\n", id));
- mptscsih_writeSDP1(hd, 0, ii, MPT_SCSICFG_USE_NVRAM);
- }
- }
- }
- return;
-}
-
-
-
-#define MPT_GET_NVRAM_VALS 0x01
-#define MPT_UPDATE_MAX 0x02
-#define MPT_SET_MAX 0x04
-#define MPT_SET_MIN 0x08
-#define MPT_FALLBACK 0x10
-#define MPT_SAVE 0x20
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_doDv - Perform domain validation to a target.
- * @hd: Pointer to MPT_SCSI_HOST structure.
- * @portnum: IOC port number.
- * @target: Physical ID of this target
- *
- * Uses the ISR, but with special processing.
- * MUST be single-threaded.
- * Test will exit if target is at async & narrow.
- *
- * Return: None.
- */
-static int
-mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- VirtTarget *vtarget;
- SCSIDevicePage1_t *pcfg1Data;
- SCSIDevicePage0_t *pcfg0Data;
- u8 *pbuf1;
- u8 *pbuf2;
- u8 *pDvBuf;
- dma_addr_t dvbuf_dma = -1;
- dma_addr_t buf1_dma = -1;
- dma_addr_t buf2_dma = -1;
- dma_addr_t cfg1_dma_addr = -1;
- dma_addr_t cfg0_dma_addr = -1;
- ConfigPageHeader_t header1;
- ConfigPageHeader_t header0;
- DVPARAMETERS dv;
- INTERNAL_CMD iocmd;
- CONFIGPARMS cfg;
- int dv_alloc = 0;
- int rc, sz = 0;
- int bufsize = 0;
- int dataBufSize = 0;
- int echoBufSize = 0;
- int notDone;
- int patt;
- int repeat;
- int retcode = 0;
- int nfactor = MPT_ULTRA320;
- char firstPass = 1;
- char doFallback = 0;
- char readPage0;
- char bus, lun;
- char inq0 = 0;
-
- if (ioc->spi_data.sdp1length == 0)
- return 0;
-
- if (ioc->spi_data.sdp0length == 0)
- return 0;
-
- /* If multiple buses are used, require that the initiator
- * id be the same on all buses.
- */
- if (id == ioc->pfacts[0].PortSCSIID)
- return 0;
-
- lun = 0;
- bus = (u8) bus_number;
- ddvtprintk((MYIOC_s_NOTE_FMT
- "DV started: bus=%d, id=%d dv @ %p\n",
- ioc->name, bus, id, &dv));
-
- /* Prep DV structure
- */
- memset (&dv, 0, sizeof(DVPARAMETERS));
- dv.id = id;
-
- /* Populate tmax with the current maximum
- * transfer parameters for this target.
- * Exit if narrow and async.
- */
- dv.cmd = MPT_GET_NVRAM_VALS;
- mptscsih_dv_parms(hd, &dv, NULL);
-
- /* Prep SCSI IO structure
- */
- iocmd.id = id;
- iocmd.bus = bus;
- iocmd.lun = lun;
- iocmd.flags = 0;
- iocmd.physDiskNum = -1;
- iocmd.rsvd = iocmd.rsvd2 = 0;
-
- vtarget = hd->Targets[id];
-
- /* Use tagged commands if possible.
- */
- if (vtarget) {
- if (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
- iocmd.flags |= MPT_ICFLAG_TAGGED_CMD;
- else {
- if (hd->ioc->facts.FWVersion.Word < 0x01000600)
- return 0;
-
- if ((hd->ioc->facts.FWVersion.Word >= 0x01010000) &&
- (hd->ioc->facts.FWVersion.Word < 0x01010B00))
- return 0;
- }
- }
-
- /* Prep cfg structure
- */
- cfg.pageAddr = (bus<<8) | id;
- cfg.cfghdr.hdr = NULL;
-
- /* Prep SDP0 header
- */
- header0.PageVersion = ioc->spi_data.sdp0version;
- header0.PageLength = ioc->spi_data.sdp0length;
- header0.PageNumber = 0;
- header0.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
-
- /* Prep SDP1 header
- */
- header1.PageVersion = ioc->spi_data.sdp1version;
- header1.PageLength = ioc->spi_data.sdp1length;
- header1.PageNumber = 1;
- header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
-
- if (header0.PageLength & 1)
- dv_alloc = (header0.PageLength * 4) + 4;
-
- dv_alloc += (2048 + (header1.PageLength * 4));
-
- pDvBuf = pci_alloc_consistent(ioc->pcidev, dv_alloc, &dvbuf_dma);
- if (pDvBuf == NULL)
- return 0;
-
- sz = 0;
- pbuf1 = (u8 *)pDvBuf;
- buf1_dma = dvbuf_dma;
- sz +=1024;
-
- pbuf2 = (u8 *) (pDvBuf + sz);
- buf2_dma = dvbuf_dma + sz;
- sz +=1024;
-
- pcfg0Data = (SCSIDevicePage0_t *) (pDvBuf + sz);
- cfg0_dma_addr = dvbuf_dma + sz;
- sz += header0.PageLength * 4;
-
- /* 8-byte alignment
- */
- if (header0.PageLength & 1)
- sz += 4;
-
- pcfg1Data = (SCSIDevicePage1_t *) (pDvBuf + sz);
- cfg1_dma_addr = dvbuf_dma + sz;
-
- /* Skip this ID? Set cfg.cfghdr.hdr to force config page write
- */
- {
- SpiCfgData *pspi_data = &hd->ioc->spi_data;
- if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- /* Set the factor from nvram */
- nfactor = (pspi_data->nvram[id] & MPT_NVRAM_SYNC_MASK) >> 8;
- if (nfactor < pspi_data->minSyncFactor )
- nfactor = pspi_data->minSyncFactor;
-
- if (!(pspi_data->nvram[id] & MPT_NVRAM_ID_SCAN_ENABLE) ||
- (pspi_data->PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV) ) {
-
- ddvprintk((MYIOC_s_NOTE_FMT "DV Skipped: bus, id, lun (%d, %d, %d)\n",
- ioc->name, bus, id, lun));
-
- dv.cmd = MPT_SET_MAX;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- cfg.cfghdr.hdr = &header1;
-
- /* Save the final negotiated settings to
- * SCSI device page 1.
- */
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- mpt_config(hd->ioc, &cfg);
- goto target_done;
- }
- }
- }
-
- /* Finish iocmd inititialization - hidden or visible disk? */
- if (ioc->raid_data.pIocPg3) {
- /* Search IOC page 3 for matching id
- */
- Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- if (pPDisk->PhysDiskID == id) {
- /* match */
- iocmd.flags |= MPT_ICFLAG_PHYS_DISK;
- iocmd.physDiskNum = pPDisk->PhysDiskNum;
-
- /* Quiesce the IM
- */
- if (mptscsih_do_raid(hd, MPI_RAID_ACTION_QUIESCE_PHYS_IO, &iocmd) < 0) {
- ddvprintk((MYIOC_s_ERR_FMT "RAID Queisce FAILED!\n", ioc->name));
- goto target_done;
- }
- break;
- }
- pPDisk++;
- numPDisk--;
- }
- }
-
- /* RAID Volume ID's may double for a physical device. If RAID but
- * not a physical ID as well, skip DV.
- */
- if ((hd->ioc->raid_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK))
- goto target_done;
-
-
- /* Basic Test.
- * Async & Narrow - Inquiry
- * Async & Narrow - Inquiry
- * Maximum transfer rate - Inquiry
- * Compare buffers:
- * If compare, test complete.
- * If miscompare and first pass, repeat
- * If miscompare and not first pass, fall back and repeat
- */
- hd->pLocal = NULL;
- readPage0 = 0;
- sz = SCSI_MAX_INQUIRY_BYTES;
- rc = MPT_SCANDV_GOOD;
- while (1) {
- ddvprintk((MYIOC_s_NOTE_FMT "DV: Start Basic test on id=%d\n", ioc->name, id));
- retcode = 0;
- dv.cmd = MPT_SET_MIN;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- cfg.cfghdr.hdr = &header1;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- /* Wide - narrow - wide workaround case
- */
- if ((rc == MPT_SCANDV_ISSUE_SENSE) && dv.max.width) {
- /* Send an untagged command to reset disk Qs corrupted
- * when a parity error occurs on a Request Sense.
- */
- if ((hd->ioc->facts.FWVersion.Word >= 0x01000600) ||
- ((hd->ioc->facts.FWVersion.Word >= 0x01010000) &&
- (hd->ioc->facts.FWVersion.Word < 0x01010B00)) ) {
-
- iocmd.cmd = REQUEST_SENSE;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = 0x12;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else {
- if (hd->pLocal == NULL)
- goto target_done;
- rc = hd->pLocal->completion;
- if ((rc == MPT_SCANDV_GOOD) || (rc == MPT_SCANDV_SENSE)) {
- dv.max.width = 0;
- doFallback = 0;
- } else
- goto target_done;
- }
- } else
- goto target_done;
- }
-
- iocmd.cmd = INQUIRY;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = sz;
- memset(pbuf1, 0x00, sz);
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else {
- if (hd->pLocal == NULL)
- goto target_done;
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD) {
- if (hd->pLocal->scsiStatus == SAM_STAT_BUSY) {
- if ((iocmd.flags & MPT_ICFLAG_TAGGED_CMD) == 0)
- retcode = 1;
- else
- retcode = 0;
-
- goto target_done;
- }
- } else if (rc == MPT_SCANDV_SENSE) {
- ;
- } else {
- /* If first command doesn't complete
- * with a good status or with a check condition,
- * exit.
- */
- goto target_done;
- }
- }
-
- /* Reset the size for disks
- */
- inq0 = (*pbuf1) & 0x1F;
- if ((inq0 == 0) && vtarget && !vtarget->raidVolume) {
- sz = 0x40;
- iocmd.size = sz;
- }
-
- /* Another GEM workaround. Check peripheral device type,
- * if PROCESSOR, quit DV.
- */
- if (inq0 == TYPE_PROCESSOR) {
- mptscsih_initTarget(hd,
- vtarget,
- lun,
- pbuf1,
- sz);
- goto target_done;
- }
-
- if (inq0 > 0x08)
- goto target_done;
-
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
-
- if (sz == 0x40) {
- if ((vtarget->maxWidth == 1) && (vtarget->maxOffset) && (nfactor < 0x0A)
- && (vtarget->minSyncFactor > 0x09)) {
- if ((pbuf1[56] & 0x04) == 0)
- ;
- else if ((pbuf1[56] & 0x01) == 1) {
- vtarget->minSyncFactor =
- nfactor > MPT_ULTRA320 ? nfactor : MPT_ULTRA320;
- } else {
- vtarget->minSyncFactor =
- nfactor > MPT_ULTRA160 ? nfactor : MPT_ULTRA160;
- }
-
- dv.max.factor = vtarget->minSyncFactor;
-
- if ((pbuf1[56] & 0x02) == 0) {
- vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
- hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
- "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
- ioc->name, id, pbuf1[56]));
- }
- }
- }
-
- if (doFallback)
- dv.cmd = MPT_FALLBACK;
- else
- dv.cmd = MPT_SET_MAX;
-
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
-
- iocmd.cmd = INQUIRY;
- iocmd.data_dma = buf2_dma;
- iocmd.data = pbuf2;
- iocmd.size = sz;
- memset(pbuf2, 0x00, sz);
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- /* Save the return code.
- * If this is the first pass,
- * read SCSI Device Page 0
- * and update the target max parameters.
- */
- rc = hd->pLocal->completion;
- doFallback = 0;
- if (rc == MPT_SCANDV_GOOD) {
- if (!readPage0) {
- u32 sdp0_info;
- u32 sdp0_nego;
-
- cfg.cfghdr.hdr = &header0;
- cfg.physAddr = cfg0_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
- cfg.dir = 0;
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- sdp0_info = le32_to_cpu(pcfg0Data->Information) & 0x0E;
- sdp0_nego = (le32_to_cpu(pcfg0Data->NegotiatedParameters) & 0xFF00 ) >> 8;
-
- /* Quantum and Fujitsu workarounds.
- * Quantum: PPR U320 -> PPR reply with Ultra2 and wide
- * Fujitsu: PPR U320 -> Msg Reject and Ultra2 and wide
- * Resetart with a request for U160.
- */
- if ((dv.now.factor == MPT_ULTRA320) && (sdp0_nego == MPT_ULTRA2)) {
- doFallback = 1;
- } else {
- dv.cmd = MPT_UPDATE_MAX;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg0Data);
- /* Update the SCSI device page 1 area
- */
- pcfg1Data->RequestedParameters = pcfg0Data->NegotiatedParameters;
- readPage0 = 1;
- }
- }
-
- /* Quantum workaround. Restart this test will the fallback
- * flag set.
- */
- if (doFallback == 0) {
- if (memcmp(pbuf1, pbuf2, sz) != 0) {
- if (!firstPass)
- doFallback = 1;
- } else {
- ddvprintk((MYIOC_s_NOTE_FMT
- "DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id));
- hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE;
- mptscsih_initTarget(hd,
- vtarget,
- lun,
- pbuf1,
- sz);
- break; /* test complete */
- }
- }
-
-
- } else if (rc == MPT_SCANDV_ISSUE_SENSE)
- doFallback = 1; /* set fallback flag */
- else if ((rc == MPT_SCANDV_DID_RESET) ||
- (rc == MPT_SCANDV_SENSE) ||
- (rc == MPT_SCANDV_FALLBACK))
- doFallback = 1; /* set fallback flag */
- else
- goto target_done;
-
- firstPass = 0;
- }
- }
- ddvprintk((MYIOC_s_NOTE_FMT "DV: Basic test on id=%d completed OK.\n", ioc->name, id));
-
- if (ioc->spi_data.mpt_dv == 0)
- goto target_done;
-
- inq0 = (*pbuf1) & 0x1F;
-
- /* Continue only for disks
- */
- if (inq0 != 0)
- goto target_done;
-
- if ( ioc->spi_data.PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY )
- goto target_done;
-
- /* Start the Enhanced Test.
- * 0) issue TUR to clear out check conditions
- * 1) read capacity of echo (regular) buffer
- * 2) reserve device
- * 3) do write-read-compare data pattern test
- * 4) release
- * 5) update nego parms to target struct
- */
- cfg.cfghdr.hdr = &header1;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
-
- iocmd.cmd = TEST_UNIT_READY;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- notDone = 1;
- while (notDone) {
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
-
- if (hd->pLocal == NULL)
- goto target_done;
-
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD)
- notDone = 0;
- else if (rc == MPT_SCANDV_SENSE) {
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- u8 asc = hd->pLocal->sense[12];
- u8 ascq = hd->pLocal->sense[13];
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
- ioc->name, skey, asc, ascq));
-
- if (skey == UNIT_ATTENTION)
- notDone++; /* repeat */
- else if ((skey == NOT_READY) &&
- (asc == 0x04)&&(ascq == 0x01)) {
- /* wait then repeat */
- mdelay (2000);
- notDone++;
- } else if ((skey == NOT_READY) && (asc == 0x3A)) {
- /* no medium, try read test anyway */
- notDone = 0;
- } else {
- /* All other errors are fatal.
- */
- ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.",
- ioc->name));
- goto target_done;
- }
- } else
- goto target_done;
- }
-
- iocmd.cmd = READ_BUFFER;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = 4;
- iocmd.flags |= MPT_ICFLAG_BUF_CAP;
-
- dataBufSize = 0;
- echoBufSize = 0;
- for (patt = 0; patt < 2; patt++) {
- if (patt == 0)
- iocmd.flags |= MPT_ICFLAG_ECHO;
- else
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
-
- notDone = 1;
- while (notDone) {
- bufsize = 0;
-
- /* If not ready after 8 trials,
- * give up on this device.
- */
- if (notDone > 8)
- goto target_done;
-
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- ddvprintk(("ReadBuffer Comp Code %d", rc));
- ddvprintk((" buff: %0x %0x %0x %0x\n",
- pbuf1[0], pbuf1[1], pbuf1[2], pbuf1[3]));
-
- if (rc == MPT_SCANDV_GOOD) {
- notDone = 0;
- if (iocmd.flags & MPT_ICFLAG_ECHO) {
- bufsize = ((pbuf1[2] & 0x1F) <<8) | pbuf1[3];
- if (pbuf1[0] & 0x01)
- iocmd.flags |= MPT_ICFLAG_EBOS;
- } else {
- bufsize = pbuf1[1]<<16 | pbuf1[2]<<8 | pbuf1[3];
- }
- } else if (rc == MPT_SCANDV_SENSE) {
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- u8 asc = hd->pLocal->sense[12];
- u8 ascq = hd->pLocal->sense[13];
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
- ioc->name, skey, asc, ascq));
- if (skey == ILLEGAL_REQUEST) {
- notDone = 0;
- } else if (skey == UNIT_ATTENTION) {
- notDone++; /* repeat */
- } else if ((skey == NOT_READY) &&
- (asc == 0x04)&&(ascq == 0x01)) {
- /* wait then repeat */
- mdelay (2000);
- notDone++;
- } else {
- /* All other errors are fatal.
- */
- ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.",
- ioc->name));
- goto target_done;
- }
- } else {
- /* All other errors are fatal
- */
- goto target_done;
- }
- }
- }
-
- if (iocmd.flags & MPT_ICFLAG_ECHO)
- echoBufSize = bufsize;
- else
- dataBufSize = bufsize;
- }
- sz = 0;
- iocmd.flags &= ~MPT_ICFLAG_BUF_CAP;
-
- /* Use echo buffers if possible,
- * Exit if both buffers are 0.
- */
- if (echoBufSize > 0) {
- iocmd.flags |= MPT_ICFLAG_ECHO;
- if (dataBufSize > 0)
- bufsize = min(echoBufSize, dataBufSize);
- else
- bufsize = echoBufSize;
- } else if (dataBufSize == 0)
- goto target_done;
-
- ddvprintk((MYIOC_s_INFO_FMT "%s Buffer Capacity %d\n", ioc->name,
- (iocmd.flags & MPT_ICFLAG_ECHO) ? "Echo" : " ", bufsize));
-
- /* Data buffers for write-read-compare test max 1K.
- */
- sz = min(bufsize, 1024);
-
- /* --- loop ----
- * On first pass, always issue a reserve.
- * On additional loops, only if a reset has occurred.
- * iocmd.flags indicates if echo or regular buffer
- */
- for (patt = 0; patt < 4; patt++) {
- ddvprintk(("Pattern %d\n", patt));
- if ((iocmd.flags & MPT_ICFLAG_RESERVED) && (iocmd.flags & MPT_ICFLAG_DID_RESET)) {
- iocmd.cmd = TEST_UNIT_READY;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
-
- iocmd.cmd = RELEASE;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- ddvprintk(("Release rc %d\n", rc));
- if (rc == MPT_SCANDV_GOOD)
- iocmd.flags &= ~MPT_ICFLAG_RESERVED;
- else
- goto target_done;
- }
- iocmd.flags &= ~MPT_ICFLAG_RESERVED;
- }
- iocmd.flags &= ~MPT_ICFLAG_DID_RESET;
-
- if (iocmd.flags & MPT_ICFLAG_EBOS)
- goto skip_Reserve;
-
- repeat = 5;
- while (repeat && (!(iocmd.flags & MPT_ICFLAG_RESERVED))) {
- iocmd.cmd = RESERVE;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD) {
- iocmd.flags |= MPT_ICFLAG_RESERVED;
- } else if (rc == MPT_SCANDV_SENSE) {
- /* Wait if coming ready
- */
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- u8 asc = hd->pLocal->sense[12];
- u8 ascq = hd->pLocal->sense[13];
- ddvprintk((MYIOC_s_INFO_FMT
- "DV: Reserve Failed: ", ioc->name));
- ddvprintk(("SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
- skey, asc, ascq));
-
- if ((skey == NOT_READY) && (asc == 0x04)&&
- (ascq == 0x01)) {
- /* wait then repeat */
- mdelay (2000);
- notDone++;
- } else {
- ddvprintk((MYIOC_s_INFO_FMT
- "DV: Reserved Failed.", ioc->name));
- goto target_done;
- }
- } else {
- ddvprintk((MYIOC_s_INFO_FMT "DV: Reserved Failed.",
- ioc->name));
- goto target_done;
- }
- }
- }
-
-skip_Reserve:
- mptscsih_fillbuf(pbuf1, sz, patt, 1);
- iocmd.cmd = WRITE_BUFFER;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = sz;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD)
- ; /* Issue read buffer */
- else if (rc == MPT_SCANDV_DID_RESET) {
- /* If using echo buffers, reset to data buffers.
- * Else do Fallback and restart
- * this test (re-issue reserve
- * because of bus reset).
- */
- if ((iocmd.flags & MPT_ICFLAG_ECHO) && (dataBufSize >= bufsize)) {
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
- } else {
- dv.cmd = MPT_FALLBACK;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
- }
-
- iocmd.flags |= MPT_ICFLAG_DID_RESET;
- patt = -1;
- continue;
- } else if (rc == MPT_SCANDV_SENSE) {
- /* Restart data test if UA, else quit.
- */
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey,
- hd->pLocal->sense[12], hd->pLocal->sense[13]));
- if (skey == UNIT_ATTENTION) {
- patt = -1;
- continue;
- } else if (skey == ILLEGAL_REQUEST) {
- if (iocmd.flags & MPT_ICFLAG_ECHO) {
- if (dataBufSize >= bufsize) {
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
- patt = -1;
- continue;
- }
- }
- goto target_done;
- }
- else
- goto target_done;
- } else {
- /* fatal error */
- goto target_done;
- }
- }
-
- iocmd.cmd = READ_BUFFER;
- iocmd.data_dma = buf2_dma;
- iocmd.data = pbuf2;
- iocmd.size = sz;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD) {
- /* If buffers compare,
- * go to next pattern,
- * else, do a fallback and restart
- * data transfer test.
- */
- if (memcmp (pbuf1, pbuf2, sz) == 0) {
- ; /* goto next pattern */
- } else {
- /* Miscompare with Echo buffer, go to data buffer,
- * if that buffer exists.
- * Miscompare with Data buffer, check first 4 bytes,
- * some devices return capacity. Exit in this case.
- */
- if (iocmd.flags & MPT_ICFLAG_ECHO) {
- if (dataBufSize >= bufsize)
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
- else
- goto target_done;
- } else {
- if (dataBufSize == (pbuf2[1]<<16 | pbuf2[2]<<8 | pbuf2[3])) {
- /* Argh. Device returning wrong data.
- * Quit DV for this device.
- */
- goto target_done;
- }
-
- /* Had an actual miscompare. Slow down.*/
- dv.cmd = MPT_FALLBACK;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
- }
-
- patt = -1;
- continue;
- }
- } else if (rc == MPT_SCANDV_DID_RESET) {
- /* Do Fallback and restart
- * this test (re-issue reserve
- * because of bus reset).
- */
- dv.cmd = MPT_FALLBACK;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
-
- iocmd.flags |= MPT_ICFLAG_DID_RESET;
- patt = -1;
- continue;
- } else if (rc == MPT_SCANDV_SENSE) {
- /* Restart data test if UA, else quit.
- */
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey,
- hd->pLocal->sense[12], hd->pLocal->sense[13]));
- if (skey == UNIT_ATTENTION) {
- patt = -1;
- continue;
- }
- else
- goto target_done;
- } else {
- /* fatal error */
- goto target_done;
- }
- }
-
- } /* --- end of patt loop ---- */
-
-target_done:
- if (iocmd.flags & MPT_ICFLAG_RESERVED) {
- iocmd.cmd = RELEASE;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d",
- ioc->name, id);
- else if (hd->pLocal) {
- if (hd->pLocal->completion == MPT_SCANDV_GOOD)
- iocmd.flags &= ~MPT_ICFLAG_RESERVED;
- } else {
- printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d",
- ioc->name, id);
- }
- }
-
-
- /* Set if cfg1_dma_addr contents is valid
- */
- if ((cfg.cfghdr.hdr != NULL) && (retcode == 0)){
- /* If disk, not U320, disable QAS
- */
- if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) {
- hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
- "noQas set due to id=%d has factor=%x\n", ioc->name, id, dv.now.factor));
- }
-
- dv.cmd = MPT_SAVE;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- /* Double writes to SDP1 can cause problems,
- * skip save of the final negotiated settings to
- * SCSI device page 1.
- *
- cfg.cfghdr.hdr = &header1;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- mpt_config(hd->ioc, &cfg);
- */
- }
-
- /* If this is a RAID Passthrough, enable internal IOs
- */
- if (iocmd.flags & MPT_ICFLAG_PHYS_DISK) {
- if (mptscsih_do_raid(hd, MPI_RAID_ACTION_ENABLE_PHYS_IO, &iocmd) < 0)
- ddvprintk((MYIOC_s_ERR_FMT "RAID Enable FAILED!\n", ioc->name));
- }
-
- /* Done with the DV scan of the current target
- */
- if (pDvBuf)
- pci_free_consistent(ioc->pcidev, dv_alloc, pDvBuf, dvbuf_dma);
-
- ddvtprintk((MYIOC_s_INFO_FMT "DV Done id=%d\n",
- ioc->name, id));
-
- return retcode;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_dv_parms - perform a variety of operations on the
- * parameters used for negotiation.
- * @hd: Pointer to a SCSI host.
- * @dv: Pointer to a structure that contains the maximum and current
- * negotiated parameters.
- */
-static void
-mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
-{
- VirtTarget *vtarget;
- SCSIDevicePage0_t *pPage0;
- SCSIDevicePage1_t *pPage1;
- int val = 0, data, configuration;
- u8 width = 0;
- u8 offset = 0;
- u8 factor = 0;
- u8 negoFlags = 0;
- u8 cmd = dv->cmd;
- u8 id = dv->id;
-
- switch (cmd) {
- case MPT_GET_NVRAM_VALS:
- ddvprintk((MYIOC_s_NOTE_FMT "Getting NVRAM: ",
- hd->ioc->name));
- /* Get the NVRAM values and save in tmax
- * If not an LVD bus, the adapter minSyncFactor has been
- * already throttled back.
- */
- negoFlags = hd->ioc->spi_data.noQas;
- if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume) {
- width = vtarget->maxWidth;
- offset = vtarget->maxOffset;
- factor = vtarget->minSyncFactor;
- negoFlags |= vtarget->negoFlags;
- } else {
- if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- data = hd->ioc->spi_data.nvram[id];
- width = data & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
- if ((offset = hd->ioc->spi_data.maxSyncOffset) == 0)
- factor = MPT_ASYNC;
- else {
- factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
- if ((factor == 0) || (factor == MPT_ASYNC)){
- factor = MPT_ASYNC;
- offset = 0;
- }
- }
- } else {
- width = MPT_NARROW;
- offset = 0;
- factor = MPT_ASYNC;
- }
-
- /* Set the negotiation flags */
- if (!width)
- negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
-
- if (!offset)
- negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
- }
-
- /* limit by adapter capabilities */
- width = min(width, hd->ioc->spi_data.maxBusWidth);
- offset = min(offset, hd->ioc->spi_data.maxSyncOffset);
- factor = max(factor, hd->ioc->spi_data.minSyncFactor);
-
- /* Check Consistency */
- if (offset && (factor < MPT_ULTRA2) && !width)
- factor = MPT_ULTRA2;
-
- dv->max.width = width;
- dv->max.offset = offset;
- dv->max.factor = factor;
- dv->max.flags = negoFlags;
- ddvprintk((" id=%d width=%d factor=%x offset=%x flags=%x\n",
- id, width, factor, offset, negoFlags));
- break;
-
- case MPT_UPDATE_MAX:
- ddvprintk((MYIOC_s_NOTE_FMT
- "Updating with SDP0 Data: ", hd->ioc->name));
- /* Update tmax values with those from Device Page 0.*/
- pPage0 = (SCSIDevicePage0_t *) pPage;
- if (pPage0) {
- val = le32_to_cpu(pPage0->NegotiatedParameters);
- dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
- dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
- dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
- }
-
- dv->now.width = dv->max.width;
- dv->now.offset = dv->max.offset;
- dv->now.factor = dv->max.factor;
- ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags));
- break;
-
- case MPT_SET_MAX:
- ddvprintk((MYIOC_s_NOTE_FMT "Setting Max: ",
- hd->ioc->name));
- /* Set current to the max values. Update the config page.*/
- dv->now.width = dv->max.width;
- dv->now.offset = dv->max.offset;
- dv->now.factor = dv->max.factor;
- dv->now.flags = dv->max.flags;
-
- pPage1 = (SCSIDevicePage1_t *)pPage;
- if (pPage1) {
- mptscsih_setDevicePage1Flags (dv->now.width, dv->now.factor,
- dv->now.offset, &val, &configuration, dv->now.flags);
- dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = cpu_to_le32(val);
- pPage1->Reserved = 0;
- pPage1->Configuration = cpu_to_le32(configuration);
- }
-
- ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
- break;
-
- case MPT_SET_MIN:
- ddvprintk((MYIOC_s_NOTE_FMT "Setting Min: ",
- hd->ioc->name));
- /* Set page to asynchronous and narrow
- * Do not update now, breaks fallback routine. */
- width = MPT_NARROW;
- offset = 0;
- factor = MPT_ASYNC;
- negoFlags = dv->max.flags;
-
- pPage1 = (SCSIDevicePage1_t *)pPage;
- if (pPage1) {
- mptscsih_setDevicePage1Flags (width, factor,
- offset, &val, &configuration, negoFlags);
- dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
- id, width, factor, offset, negoFlags, val, configuration));
- pPage1->RequestedParameters = cpu_to_le32(val);
- pPage1->Reserved = 0;
- pPage1->Configuration = cpu_to_le32(configuration);
- }
- ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
- id, width, factor, offset, val, configuration, negoFlags));
- break;
-
- case MPT_FALLBACK:
- ddvprintk((MYIOC_s_NOTE_FMT
- "Fallback: Start: offset %d, factor %x, width %d \n",
- hd->ioc->name, dv->now.offset,
- dv->now.factor, dv->now.width));
- width = dv->now.width;
- offset = dv->now.offset;
- factor = dv->now.factor;
- if ((offset) && (dv->max.width)) {
- if (factor < MPT_ULTRA160)
- factor = MPT_ULTRA160;
- else if (factor < MPT_ULTRA2) {
- factor = MPT_ULTRA2;
- width = MPT_WIDE;
- } else if ((factor == MPT_ULTRA2) && width) {
- factor = MPT_ULTRA2;
- width = MPT_NARROW;
- } else if (factor < MPT_ULTRA) {
- factor = MPT_ULTRA;
- width = MPT_WIDE;
- } else if ((factor == MPT_ULTRA) && width) {
- width = MPT_NARROW;
- } else if (factor < MPT_FAST) {
- factor = MPT_FAST;
- width = MPT_WIDE;
- } else if ((factor == MPT_FAST) && width) {
- factor = MPT_FAST;
- width = MPT_NARROW;
- } else if (factor < MPT_SCSI) {
- factor = MPT_SCSI;
- width = MPT_WIDE;
- } else if ((factor == MPT_SCSI) && width) {
- factor = MPT_SCSI;
- width = MPT_NARROW;
- } else {
- factor = MPT_ASYNC;
- offset = 0;
- }
-
- } else if (offset) {
- width = MPT_NARROW;
- if (factor < MPT_ULTRA)
- factor = MPT_ULTRA;
- else if (factor < MPT_FAST)
- factor = MPT_FAST;
- else if (factor < MPT_SCSI)
- factor = MPT_SCSI;
- else {
- factor = MPT_ASYNC;
- offset = 0;
- }
-
- } else {
- width = MPT_NARROW;
- factor = MPT_ASYNC;
- }
- dv->max.flags |= MPT_TARGET_NO_NEGO_QAS;
- dv->max.flags &= ~MPT_TAPE_NEGO_IDP;
-
- dv->now.width = width;
- dv->now.offset = offset;
- dv->now.factor = factor;
- dv->now.flags = dv->max.flags;
-
- pPage1 = (SCSIDevicePage1_t *)pPage;
- if (pPage1) {
- mptscsih_setDevicePage1Flags (width, factor, offset, &val,
- &configuration, dv->now.flags);
- dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
- id, width, offset, factor, dv->now.flags, val, configuration));
-
- pPage1->RequestedParameters = cpu_to_le32(val);
- pPage1->Reserved = 0;
- pPage1->Configuration = cpu_to_le32(configuration);
- }
-
- ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",
- id, dv->now.offset, dv->now.factor, dv->now.width, val, configuration));
- break;
-
- case MPT_SAVE:
- ddvprintk((MYIOC_s_NOTE_FMT
- "Saving to Target structure: ", hd->ioc->name));
- ddvprintk(("id=%d width=%x factor=%x offset=%d flags=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags));
-
- /* Save these values to target structures
- * or overwrite nvram (phys disks only).
- */
-
- if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume ) {
- vtarget->maxWidth = dv->now.width;
- vtarget->maxOffset = dv->now.offset;
- vtarget->minSyncFactor = dv->now.factor;
- vtarget->negoFlags = dv->now.flags;
- } else {
- /* Preserv all flags, use
- * read-modify-write algorithm
- */
- if (hd->ioc->spi_data.nvram) {
- data = hd->ioc->spi_data.nvram[id];
-
- if (dv->now.width)
- data &= ~MPT_NVRAM_WIDE_DISABLE;
- else
- data |= MPT_NVRAM_WIDE_DISABLE;
-
- if (!dv->now.offset)
- factor = MPT_ASYNC;
-
- data &= ~MPT_NVRAM_SYNC_MASK;
- data |= (dv->now.factor << MPT_NVRAM_SYNC_SHIFT) & MPT_NVRAM_SYNC_MASK;
-
- hd->ioc->spi_data.nvram[id] = data;
- }
- }
- break;
- }
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_fillbuf - fill a buffer with a special data pattern
- * cleanup. For bus scan only.
- *
- * @buffer: Pointer to data buffer to be filled.
- * @size: Number of bytes to fill
- * @index: Pattern index
- * @width: bus width, 0 (8 bits) or 1 (16 bits)
- */
-static void
-mptscsih_fillbuf(char *buffer, int size, int index, int width)
-{
- char *ptr = buffer;
- int ii;
- char byte;
- short val;
-
- switch (index) {
- case 0:
-
- if (width) {
- /* Pattern: 0000 FFFF 0000 FFFF
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x02)
- *ptr = 0xFF;
- else
- *ptr = 0x00;
- }
- } else {
- /* Pattern: 00 FF 00 FF
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x01)
- *ptr = 0xFF;
- else
- *ptr = 0x00;
- }
- }
- break;
-
- case 1:
- if (width) {
- /* Pattern: 5555 AAAA 5555 AAAA 5555
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x02)
- *ptr = 0xAA;
- else
- *ptr = 0x55;
- }
- } else {
- /* Pattern: 55 AA 55 AA 55
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x01)
- *ptr = 0xAA;
- else
- *ptr = 0x55;
- }
- }
- break;
-
- case 2:
- /* Pattern: 00 01 02 03 04 05
- * ... FE FF 00 01..
- */
- for (ii=0; ii < size; ii++, ptr++)
- *ptr = (char) ii;
- break;
-
- case 3:
- if (width) {
- /* Wide Pattern: FFFE 0001 FFFD 0002
- * ... 4000 DFFF 8000 EFFF
- */
- byte = 0;
- for (ii=0; ii < size/2; ii++) {
- /* Create the base pattern
- */
- val = (1 << byte);
- /* every 64 (0x40) bytes flip the pattern
- * since we fill 2 bytes / iteration,
- * test for ii = 0x20
- */
- if (ii & 0x20)
- val = ~(val);
-
- if (ii & 0x01) {
- *ptr = (char)( (val & 0xFF00) >> 8);
- ptr++;
- *ptr = (char)(val & 0xFF);
- byte++;
- byte &= 0x0F;
- } else {
- val = ~val;
- *ptr = (char)( (val & 0xFF00) >> 8);
- ptr++;
- *ptr = (char)(val & 0xFF);
- }
-
- ptr++;
- }
- } else {
- /* Narrow Pattern: FE 01 FD 02 FB 04
- * .. 7F 80 01 FE 02 FD ... 80 7F
- */
- byte = 0;
- for (ii=0; ii < size; ii++, ptr++) {
- /* Base pattern - first 32 bytes
- */
- if (ii & 0x01) {
- *ptr = (1 << byte);
- byte++;
- byte &= 0x07;
- } else {
- *ptr = (char) (~(1 << byte));
- }
-
- /* Flip the pattern every 32 bytes
- */
- if (ii & 0x20)
- *ptr = ~(*ptr);
- }
- }
- break;
- }
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
- * Else set the NEED_DV flag after Read Capacity Issued (disks)
- * or Mode Sense (cdroms).
- *
- * Tapes, initTarget will set this flag on completion of Inquiry command.
- * Called only if DV_NOT_DONE flag is set
- */
-static void
-mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- u8 cmd;
- SpiCfgData *pSpi;
-
- ddvtprintk((MYIOC_s_NOTE_FMT
- " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
- hd->ioc->name, sc->device->id, sc->device->lun , hd->negoNvram, sc->cmnd[0]));
-
- if ((sc->device->lun != 0) || (hd->negoNvram != 0))
- return;
-
- cmd = sc->cmnd[0];
-
- if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
- pSpi = &ioc->spi_data;
- if ((ioc->raid_data.isRaid & (1 << sc->device->id)) && ioc->raid_data.pIocPg3) {
- /* Set NEED_DV for all hidden disks
- */
- Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
- pPDisk++;
- numPDisk--;
- }
- }
- pSpi->dvStatus[sc->device->id] |= MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for visible disk id %d\n", sc->device->id));
- }
-}
-
-/* mptscsih_raid_set_dv_flags()
- *
- * New or replaced disk. Set DV flag and schedule DV.
- */
-static void
-mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- SpiCfgData *pSpi = &ioc->spi_data;
- Ioc3PhysDisk_t *pPDisk;
- int numPDisk;
-
- if (hd->negoNvram != 0)
- return;
-
- ddvtprintk(("DV requested for phys disk id %d\n", id));
- if (ioc->raid_data.pIocPg3) {
- pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
- while (numPDisk) {
- if (id == pPDisk->PhysDiskNum) {
- pSpi->dvStatus[pPDisk->PhysDiskID] =
- (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
- pSpi->forceDv = MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for phys disk id %d\n",
- pPDisk->PhysDiskID));
- break;
- }
- pPDisk++;
- numPDisk--;
- }
-
- if (numPDisk == 0) {
- /* The physical disk that needs DV was not found
- * in the stored IOC Page 3. The driver must reload
- * this page. DV routine will set the NEED_DV flag for
- * all phys disks that have DV_NOT_DONE set.
- */
- pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
- ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
- }
- }
-}
-#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
-
EXPORT_SYMBOL(mptscsih_remove);
EXPORT_SYMBOL(mptscsih_shutdown);
#ifdef CONFIG_PM
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 44b248d51ea..14a5b6c2e2b 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -60,16 +60,6 @@
#define MPT_SCSI_MAX_SECTORS 8192
-/* To disable domain validation, uncomment the
- * following line. No effect for FC devices.
- * For SCSI devices, driver will negotiate to
- * NVRAM settings (if available) or to maximum adapter
- * capabilities.
- */
-
-#define MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-
-
/* SCSI driver setup structure. Settings can be overridden
* by command line options.
*/
@@ -109,3 +99,5 @@ extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern void mptscsih_timer_expired(unsigned long data);
extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
+extern int mptscsih_raid_id_to_num(MPT_SCSI_HOST *hd, uint physdiskid);
+extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index f148dfa3911..09c745b19cc 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -56,12 +56,15 @@
#include <linux/reboot.h> /* notifier code */
#include <linux/sched.h>
#include <linux/workqueue.h>
+#include <linux/raid_class.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
#include "mptbase.h"
#include "mptscsih.h"
@@ -76,20 +79,6 @@ MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
/* Command line args */
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-static int mpt_dv = MPTSCSIH_DOMAIN_VALIDATION;
-module_param(mpt_dv, int, 0);
-MODULE_PARM_DESC(mpt_dv, " DV Algorithm: enhanced=1, basic=0 (default=MPTSCSIH_DOMAIN_VALIDATION=1)");
-
-static int mpt_width = MPTSCSIH_MAX_WIDTH;
-module_param(mpt_width, int, 0);
-MODULE_PARM_DESC(mpt_width, " Max Bus Width: wide=1, narrow=0 (default=MPTSCSIH_MAX_WIDTH=1)");
-
-static ushort mpt_factor = MPTSCSIH_MIN_SYNC;
-module_param(mpt_factor, ushort, 0);
-MODULE_PARM_DESC(mpt_factor, " Min Sync Factor (default=MPTSCSIH_MIN_SYNC=0x08)");
-#endif
-
static int mpt_saf_te = MPTSCSIH_SAF_TE;
module_param(mpt_saf_te, int, 0);
MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)");
@@ -98,10 +87,308 @@ static int mpt_pq_filter = 0;
module_param(mpt_pq_filter, int, 0);
MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)");
+static void mptspi_write_offset(struct scsi_target *, int);
+static void mptspi_write_width(struct scsi_target *, int);
+static int mptspi_write_spi_device_pg1(struct scsi_target *,
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 *);
+
+static struct scsi_transport_template *mptspi_transport_template = NULL;
+
static int mptspiDoneCtx = -1;
static int mptspiTaskCtx = -1;
static int mptspiInternalCtx = -1; /* Used only for internal commands */
+static int mptspi_target_alloc(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata;
+ int ret;
+
+ if (hd == NULL)
+ return -ENODEV;
+
+ ret = mptscsih_target_alloc(starget);
+ if (ret)
+ return ret;
+
+ /* if we're a device on virtual channel 1 and we're not part
+ * of an array, just return here (otherwise the setup below
+ * may actually affect a real physical device on channel 0 */
+ if (starget->channel == 1 &&
+ mptscsih_raid_id_to_num(hd, starget->id) < 0)
+ return 0;
+
+ if (hd->ioc->spi_data.nvram &&
+ hd->ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) {
+ u32 nvram = hd->ioc->spi_data.nvram[starget->id];
+ spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
+ spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
+ } else {
+ spi_min_period(starget) = hd->ioc->spi_data.minSyncFactor;
+ spi_max_width(starget) = hd->ioc->spi_data.maxBusWidth;
+ }
+ spi_max_offset(starget) = hd->ioc->spi_data.maxSyncOffset;
+
+ spi_offset(starget) = 0;
+ mptspi_write_width(starget, 0);
+
+ return 0;
+}
+
+static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
+ struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0)
+{
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata;
+ struct _MPT_ADAPTER *ioc = hd->ioc;
+ struct _CONFIG_PAGE_SCSI_DEVICE_0 *pg0;
+ dma_addr_t pg0_dma;
+ int size;
+ struct _x_config_parms cfg;
+ struct _CONFIG_PAGE_HEADER hdr;
+ int err = -EBUSY;
+
+ /* No SPI parameters for RAID devices */
+ if (starget->channel == 0 &&
+ (hd->ioc->raid_data.isRaid & (1 << starget->id)))
+ return -1;
+
+ size = ioc->spi_data.sdp0length * 4;
+ /*
+ if (ioc->spi_data.sdp0length & 1)
+ size += size + 4;
+ size += 2048;
+ */
+
+ pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg0_dma, GFP_KERNEL);
+ if (pg0 == NULL) {
+ starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n");
+ return -EINVAL;
+ }
+
+ memset(&hdr, 0, sizeof(hdr));
+
+ hdr.PageVersion = ioc->spi_data.sdp0version;
+ hdr.PageLength = ioc->spi_data.sdp0length;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
+
+ memset(&cfg, 0, sizeof(cfg));
+
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = pg0_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.dir = 0;
+ cfg.pageAddr = starget->id;
+
+ if (mpt_config(ioc, &cfg)) {
+ starget_printk(KERN_ERR, starget, "mpt_config failed\n");
+ goto out_free;
+ }
+ err = 0;
+ memcpy(pass_pg0, pg0, size);
+
+ out_free:
+ dma_free_coherent(&ioc->pcidev->dev, size, pg0, pg0_dma);
+ return err;
+}
+
+static u32 mptspi_getRP(struct scsi_target *starget)
+{
+ u32 nego = 0;
+
+ nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0;
+ nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0;
+ nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0;
+ nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0;
+ nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0;
+ nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0;
+ nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0;
+ nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0;
+
+ nego |= (spi_period(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK;
+ nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK;
+ nego |= spi_width(starget) ? MPI_SCSIDEVPAGE1_RP_WIDE : 0;
+
+ return nego;
+}
+
+static void mptspi_read_parameters(struct scsi_target *starget)
+{
+ int nego;
+ struct _CONFIG_PAGE_SCSI_DEVICE_0 pg0;
+
+ mptspi_read_spi_device_pg0(starget, &pg0);
+
+ nego = le32_to_cpu(pg0.NegotiatedParameters);
+
+ spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0;
+ spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0;
+ spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0;
+ spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0;
+ spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0;
+ spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0;
+ spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0;
+ spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0;
+ spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD;
+ spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET;
+ spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
+}
+
+static int
+mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk)
+{
+ MpiRaidActionRequest_t *pReq;
+ MPT_FRAME_HDR *mf;
+
+ /* Get and Populate a free Frame
+ */
+ if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
+ ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
+ hd->ioc->name));
+ return -EAGAIN;
+ }
+ pReq = (MpiRaidActionRequest_t *)mf;
+ if (quiesce)
+ pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO;
+ else
+ pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO;
+ pReq->Reserved1 = 0;
+ pReq->ChainOffset = 0;
+ pReq->Function = MPI_FUNCTION_RAID_ACTION;
+ pReq->VolumeID = disk;
+ pReq->VolumeBus = 0;
+ pReq->PhysDiskNum = 0;
+ pReq->MsgFlags = 0;
+ pReq->Reserved2 = 0;
+ pReq->ActionDataWord = 0; /* Reserved for this action */
+
+ mpt_add_sge((char *)&pReq->ActionDataSGE,
+ MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
+
+ ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n",
+ hd->ioc->name, action, io->id));
+
+ hd->pLocal = NULL;
+ hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
+ hd->scandv_wait_done = 0;
+
+ /* Save cmd pointer, for resource free if timeout or
+ * FW reload occurs
+ */
+ hd->cmdPtr = mf;
+
+ add_timer(&hd->timer);
+ mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
+ wait_event(hd->scandv_waitq, hd->scandv_wait_done);
+
+ if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0))
+ return -1;
+
+ return 0;
+}
+
+static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
+ struct scsi_device *sdev)
+{
+ VirtTarget *vtarget = scsi_target(sdev)->hostdata;
+
+ /* no DV on RAID devices */
+ if (sdev->channel == 0 &&
+ (hd->ioc->raid_data.isRaid & (1 << sdev->id)))
+ return;
+
+ /* If this is a piece of a RAID, then quiesce first */
+ if (sdev->channel == 1 &&
+ mptscsih_quiesce_raid(hd, 1, vtarget->target_id) < 0) {
+ starget_printk(KERN_ERR, scsi_target(sdev),
+ "Integrated RAID quiesce failed\n");
+ return;
+ }
+
+ spi_dv_device(sdev);
+
+ if (sdev->channel == 1 &&
+ mptscsih_quiesce_raid(hd, 0, vtarget->target_id) < 0)
+ starget_printk(KERN_ERR, scsi_target(sdev),
+ "Integrated RAID resume failed\n");
+
+ mptspi_read_parameters(sdev->sdev_target);
+ spi_display_xfer_agreement(sdev->sdev_target);
+ mptspi_read_parameters(sdev->sdev_target);
+}
+
+static int mptspi_slave_alloc(struct scsi_device *sdev)
+{
+ int ret;
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
+ /* gcc doesn't see that all uses of this variable occur within
+ * the if() statements, so stop it from whining */
+ int physdisknum = 0;
+
+ if (sdev->channel == 1) {
+ physdisknum = mptscsih_raid_id_to_num(hd, sdev->id);
+
+ if (physdisknum < 0)
+ return physdisknum;
+ }
+
+ ret = mptscsih_slave_alloc(sdev);
+
+ if (ret)
+ return ret;
+
+ if (sdev->channel == 1) {
+ VirtDevice *vdev = sdev->hostdata;
+ sdev->no_uld_attach = 1;
+ vdev->vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+ /* The real channel for this device is zero */
+ vdev->vtarget->bus_id = 0;
+ /* The actual physdisknum (for RAID passthrough) */
+ vdev->vtarget->target_id = physdisknum;
+ }
+
+ return 0;
+}
+
+static int mptspi_slave_configure(struct scsi_device *sdev)
+{
+ int ret = mptscsih_slave_configure(sdev);
+ struct _MPT_SCSI_HOST *hd =
+ (struct _MPT_SCSI_HOST *)sdev->host->hostdata;
+
+ if (ret)
+ return ret;
+
+ if ((sdev->channel == 1 ||
+ !(hd->ioc->raid_data.isRaid & (1 << sdev->id))) &&
+ !spi_initial_dv(sdev->sdev_target))
+ mptspi_dv_device(hd, sdev);
+
+ return 0;
+}
+
+static void mptspi_slave_destroy(struct scsi_device *sdev)
+{
+ struct scsi_target *starget = scsi_target(sdev);
+ VirtTarget *vtarget = starget->hostdata;
+ VirtDevice *vdevice = sdev->hostdata;
+
+ /* Will this be the last lun on a non-raid device? */
+ if (vtarget->num_luns == 1 && vdevice->configured_lun) {
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+
+ /* Async Narrow */
+ pg1.RequestedParameters = 0;
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+
+ mptspi_write_spi_device_pg1(starget, &pg1);
+ }
+
+ mptscsih_slave_destroy(sdev);
+}
+
static struct scsi_host_template mptspi_driver_template = {
.module = THIS_MODULE,
.proc_name = "mptspi",
@@ -109,11 +396,11 @@ static struct scsi_host_template mptspi_driver_template = {
.name = "MPT SPI Host",
.info = mptscsih_info,
.queuecommand = mptscsih_qcmd,
- .target_alloc = mptscsih_target_alloc,
- .slave_alloc = mptscsih_slave_alloc,
- .slave_configure = mptscsih_slave_configure,
+ .target_alloc = mptspi_target_alloc,
+ .slave_alloc = mptspi_slave_alloc,
+ .slave_configure = mptspi_slave_configure,
.target_destroy = mptscsih_target_destroy,
- .slave_destroy = mptscsih_slave_destroy,
+ .slave_destroy = mptspi_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
.eh_device_reset_handler = mptscsih_dev_reset,
@@ -128,6 +415,360 @@ static struct scsi_host_template mptspi_driver_template = {
.use_clustering = ENABLE_CLUSTERING,
};
+static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1)
+{
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata;
+ struct _MPT_ADAPTER *ioc = hd->ioc;
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1;
+ dma_addr_t pg1_dma;
+ int size;
+ struct _x_config_parms cfg;
+ struct _CONFIG_PAGE_HEADER hdr;
+ int err = -EBUSY;
+
+ /* don't allow updating nego parameters on RAID devices */
+ if (starget->channel == 0 &&
+ (hd->ioc->raid_data.isRaid & (1 << starget->id)))
+ return -1;
+
+ size = ioc->spi_data.sdp1length * 4;
+
+ pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL);
+ if (pg1 == NULL) {
+ starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n");
+ return -EINVAL;
+ }
+
+ memset(&hdr, 0, sizeof(hdr));
+
+ hdr.PageVersion = ioc->spi_data.sdp1version;
+ hdr.PageLength = ioc->spi_data.sdp1length;
+ hdr.PageNumber = 1;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
+
+ memset(&cfg, 0, sizeof(cfg));
+
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = pg1_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ cfg.dir = 1;
+ cfg.pageAddr = starget->id;
+
+ memcpy(pg1, pass_pg1, size);
+
+ pg1->Header.PageVersion = hdr.PageVersion;
+ pg1->Header.PageLength = hdr.PageLength;
+ pg1->Header.PageNumber = hdr.PageNumber;
+ pg1->Header.PageType = hdr.PageType;
+
+ if (mpt_config(ioc, &cfg)) {
+ starget_printk(KERN_ERR, starget, "mpt_config failed\n");
+ goto out_free;
+ }
+ err = 0;
+
+ out_free:
+ dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma);
+ return err;
+}
+
+static void mptspi_write_offset(struct scsi_target *starget, int offset)
+{
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ u32 nego;
+
+ if (offset < 0)
+ offset = 0;
+
+ if (offset > 255)
+ offset = 255;
+
+ if (spi_offset(starget) == -1)
+ mptspi_read_parameters(starget);
+
+ spi_offset(starget) = offset;
+
+ nego = mptspi_getRP(starget);
+
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+
+ mptspi_write_spi_device_pg1(starget, &pg1);
+}
+
+static void mptspi_write_period(struct scsi_target *starget, int period)
+{
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ u32 nego;
+
+ if (period < 8)
+ period = 8;
+
+ if (period > 255)
+ period = 255;
+
+ if (spi_period(starget) == -1)
+ mptspi_read_parameters(starget);
+
+ if (period == 8) {
+ spi_iu(starget) = 1;
+ spi_dt(starget) = 1;
+ } else if (period == 9) {
+ spi_dt(starget) = 1;
+ }
+
+ spi_period(starget) = period;
+
+ nego = mptspi_getRP(starget);
+
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+
+ mptspi_write_spi_device_pg1(starget, &pg1);
+}
+
+static void mptspi_write_dt(struct scsi_target *starget, int dt)
+{
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ u32 nego;
+
+ if (spi_period(starget) == -1)
+ mptspi_read_parameters(starget);
+
+ if (!dt && spi_period(starget) < 10)
+ spi_period(starget) = 10;
+
+ spi_dt(starget) = dt;
+
+ nego = mptspi_getRP(starget);
+
+
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+
+ mptspi_write_spi_device_pg1(starget, &pg1);
+}
+
+static void mptspi_write_iu(struct scsi_target *starget, int iu)
+{
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ u32 nego;
+
+ if (spi_period(starget) == -1)
+ mptspi_read_parameters(starget);
+
+ if (!iu && spi_period(starget) < 9)
+ spi_period(starget) = 9;
+
+ spi_iu(starget) = iu;
+
+ nego = mptspi_getRP(starget);
+
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+
+ mptspi_write_spi_device_pg1(starget, &pg1);
+}
+
+#define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) \
+static void mptspi_write_##parm(struct scsi_target *starget, int parm)\
+{ \
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; \
+ u32 nego; \
+ \
+ spi_##parm(starget) = parm; \
+ \
+ nego = mptspi_getRP(starget); \
+ \
+ pg1.RequestedParameters = cpu_to_le32(nego); \
+ pg1.Reserved = 0; \
+ pg1.Configuration = 0; \
+ \
+ mptspi_write_spi_device_pg1(starget, &pg1); \
+}
+
+MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm)
+MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow)
+MPTSPI_SIMPLE_TRANSPORT_PARM(rti)
+MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs)
+MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en)
+
+static void mptspi_write_qas(struct scsi_target *starget, int qas)
+{
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata;
+ VirtTarget *vtarget = starget->hostdata;
+ u32 nego;
+
+ if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) ||
+ hd->ioc->spi_data.noQas)
+ spi_qas(starget) = 0;
+ else
+ spi_qas(starget) = qas;
+
+ nego = mptspi_getRP(starget);
+
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+
+ mptspi_write_spi_device_pg1(starget, &pg1);
+}
+
+static void mptspi_write_width(struct scsi_target *starget, int width)
+{
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ u32 nego;
+
+ if (!width) {
+ spi_dt(starget) = 0;
+ if (spi_period(starget) < 10)
+ spi_period(starget) = 10;
+ }
+
+ spi_width(starget) = width;
+
+ nego = mptspi_getRP(starget);
+
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+
+ mptspi_write_spi_device_pg1(starget, &pg1);
+}
+
+struct work_queue_wrapper {
+ struct work_struct work;
+ struct _MPT_SCSI_HOST *hd;
+ int disk;
+};
+
+static void mpt_work_wrapper(void *data)
+{
+ struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data;
+ struct _MPT_SCSI_HOST *hd = wqw->hd;
+ struct Scsi_Host *shost = hd->ioc->sh;
+ struct scsi_device *sdev;
+ int disk = wqw->disk;
+ struct _CONFIG_PAGE_IOC_3 *pg3;
+
+ kfree(wqw);
+
+ mpt_findImVolumes(hd->ioc);
+ pg3 = hd->ioc->raid_data.pIocPg3;
+ if (!pg3)
+ return;
+
+ shost_for_each_device(sdev,shost) {
+ struct scsi_target *starget = scsi_target(sdev);
+ VirtTarget *vtarget = starget->hostdata;
+
+ /* only want to search RAID components */
+ if (sdev->channel != 1)
+ continue;
+
+ /* The target_id is the raid PhysDiskNum, even if
+ * starget->id is the actual target address */
+ if(vtarget->target_id != disk)
+ continue;
+
+ starget_printk(KERN_INFO, vtarget->starget,
+ "Integrated RAID requests DV of new device\n");
+ mptspi_dv_device(hd, sdev);
+ }
+ shost_printk(KERN_INFO, shost,
+ "Integrated RAID detects new device %d\n", disk);
+ scsi_scan_target(&hd->ioc->sh->shost_gendev, 1, disk, 0, 1);
+}
+
+
+static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk)
+{
+ struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
+
+ if (!wqw) {
+ shost_printk(KERN_ERR, hd->ioc->sh,
+ "Failed to act on RAID event for physical disk %d\n",
+ disk);
+ return;
+ }
+ INIT_WORK(&wqw->work, mpt_work_wrapper, wqw);
+ wqw->hd = hd;
+ wqw->disk = disk;
+
+ schedule_work(&wqw->work);
+}
+
+static int
+mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
+{
+ u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
+ struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata;
+
+ if (hd && event == MPI_EVENT_INTEGRATED_RAID) {
+ int reason
+ = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16;
+
+ if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
+ int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24;
+ mpt_dv_raid(hd, disk);
+ }
+ }
+ return mptscsih_event_process(ioc, pEvReply);
+}
+
+static int
+mptspi_deny_binding(struct scsi_target *starget)
+{
+ struct _MPT_SCSI_HOST *hd =
+ (struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata;
+ return ((hd->ioc->raid_data.isRaid & (1 << starget->id)) &&
+ starget->channel == 0) ? 1 : 0;
+}
+
+static struct spi_function_template mptspi_transport_functions = {
+ .get_offset = mptspi_read_parameters,
+ .set_offset = mptspi_write_offset,
+ .show_offset = 1,
+ .get_period = mptspi_read_parameters,
+ .set_period = mptspi_write_period,
+ .show_period = 1,
+ .get_width = mptspi_read_parameters,
+ .set_width = mptspi_write_width,
+ .show_width = 1,
+ .get_iu = mptspi_read_parameters,
+ .set_iu = mptspi_write_iu,
+ .show_iu = 1,
+ .get_dt = mptspi_read_parameters,
+ .set_dt = mptspi_write_dt,
+ .show_dt = 1,
+ .get_qas = mptspi_read_parameters,
+ .set_qas = mptspi_write_qas,
+ .show_qas = 1,
+ .get_wr_flow = mptspi_read_parameters,
+ .set_wr_flow = mptspi_write_wr_flow,
+ .show_wr_flow = 1,
+ .get_rd_strm = mptspi_read_parameters,
+ .set_rd_strm = mptspi_write_rd_strm,
+ .show_rd_strm = 1,
+ .get_rti = mptspi_read_parameters,
+ .set_rti = mptspi_write_rti,
+ .show_rti = 1,
+ .get_pcomp_en = mptspi_read_parameters,
+ .set_pcomp_en = mptspi_write_pcomp_en,
+ .show_pcomp_en = 1,
+ .get_hold_mcs = mptspi_read_parameters,
+ .set_hold_mcs = mptspi_write_hold_mcs,
+ .show_hold_mcs = 1,
+ .deny_binding = mptspi_deny_binding,
+};
/****************************************************************************
* Supported hardware
@@ -242,7 +883,14 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
sh->max_id = MPT_MAX_SCSI_DEVICES;
sh->max_lun = MPT_LAST_LUN + 1;
- sh->max_channel = 0;
+ /*
+ * If RAID Firmware Detected, setup virtual channel
+ */
+ if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
+ sh->max_channel = 1;
+ else
+ sh->max_channel = 0;
sh->this_id = ioc->pfacts[0].PortSCSIID;
/* Required entry.
@@ -301,7 +949,8 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
* indicates a device exists.
* max_id = 1 + maximum id (hosts.h)
*/
- hd->Targets = kcalloc(sh->max_id, sizeof(void *), GFP_ATOMIC);
+ hd->Targets = kcalloc(sh->max_id * (sh->max_channel + 1),
+ sizeof(void *), GFP_ATOMIC);
if (!hd->Targets) {
error = -ENOMEM;
goto out_mptspi_probe;
@@ -334,49 +983,23 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->spi_data.Saf_Te = mpt_saf_te;
hd->mpt_pq_filter = mpt_pq_filter;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- if (ioc->spi_data.maxBusWidth > mpt_width)
- ioc->spi_data.maxBusWidth = mpt_width;
- if (ioc->spi_data.minSyncFactor < mpt_factor)
- ioc->spi_data.minSyncFactor = mpt_factor;
- if (ioc->spi_data.minSyncFactor == MPT_ASYNC) {
- ioc->spi_data.maxSyncOffset = 0;
- }
- ioc->spi_data.mpt_dv = mpt_dv;
- hd->negoNvram = 0;
-
- ddvprintk((MYIOC_s_INFO_FMT
- "dv %x width %x factor %x saf_te %x mpt_pq_filter %x\n",
- ioc->name,
- mpt_dv,
- mpt_width,
- mpt_factor,
- mpt_saf_te,
- mpt_pq_filter));
-#else
hd->negoNvram = MPT_SCSICFG_USE_NVRAM;
ddvprintk((MYIOC_s_INFO_FMT
"saf_te %x mpt_pq_filter %x\n",
ioc->name,
mpt_saf_te,
mpt_pq_filter));
-#endif
-
- ioc->spi_data.forceDv = 0;
ioc->spi_data.noQas = 0;
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++)
- ioc->spi_data.dvStatus[ii] =
- MPT_SCSICFG_NEGOTIATE;
-
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++)
- ioc->spi_data.dvStatus[ii] |=
- MPT_SCSICFG_DV_NOT_DONE;
-
init_waitqueue_head(&hd->scandv_waitq);
hd->scandv_wait_done = 0;
hd->last_queue_full = 0;
+ /* Some versions of the firmware don't support page 0; without
+ * that we can't get the parameters */
+ if (hd->ioc->spi_data.sdp0length != 0)
+ sh->transportt = mptspi_transport_template;
+
error = scsi_add_host (sh, &ioc->pcidev->dev);
if(error) {
dprintk((KERN_ERR MYNAM
@@ -423,15 +1046,18 @@ static struct pci_driver mptspi_driver = {
static int __init
mptspi_init(void)
{
-
show_mptmod_ver(my_NAME, my_VERSION);
+ mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions);
+ if (!mptspi_transport_template)
+ return -ENODEV;
+
mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER);
mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER);
mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSPI_DRIVER);
- if (mpt_event_register(mptspiDoneCtx, mptscsih_event_process) == 0) {
- devtprintk((KERN_INFO MYNAM
+ if (mpt_event_register(mptspiDoneCtx, mptspi_event_process) == 0) {
+ devtverboseprintk((KERN_INFO MYNAM
": Registered for IOC event notifications\n"));
}
@@ -465,6 +1091,7 @@ mptspi_exit(void)
mpt_deregister(mptspiInternalCtx);
mpt_deregister(mptspiTaskCtx);
mpt_deregister(mptspiDoneCtx);
+ spi_release_transport(mptspi_transport_template);
}
module_init(mptspi_init);
diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c
index 9bb9859f6df..5ea133c59af 100644
--- a/drivers/message/i2o/exec-osm.c
+++ b/drivers/message/i2o/exec-osm.c
@@ -57,6 +57,13 @@ struct i2o_exec_wait {
struct list_head list; /* node in global wait list */
};
+/* Work struct needed to handle LCT NOTIFY replies */
+struct i2o_exec_lct_notify_work {
+ struct work_struct work; /* work struct */
+ struct i2o_controller *c; /* controller on which the LCT NOTIFY
+ was received */
+};
+
/* Exec OSM class handling definition */
static struct i2o_class_id i2o_exec_class_id[] = {
{I2O_CLASS_EXECUTIVE},
@@ -355,9 +362,12 @@ static int i2o_exec_remove(struct device *dev)
* new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY
* again, otherwise send LCT NOTIFY to get informed on next LCT change.
*/
-static void i2o_exec_lct_modified(struct i2o_controller *c)
+static void i2o_exec_lct_modified(struct i2o_exec_lct_notify_work *work)
{
u32 change_ind = 0;
+ struct i2o_controller *c = work->c;
+
+ kfree(work);
if (i2o_device_parse_lct(c) != -EAGAIN)
change_ind = c->lct->change_ind + 1;
@@ -410,7 +420,7 @@ static int i2o_exec_reply(struct i2o_controller *c, u32 m,
return i2o_msg_post_wait_complete(c, m, msg, context);
if ((le32_to_cpu(msg->u.head[1]) >> 24) == I2O_CMD_LCT_NOTIFY) {
- struct work_struct *work;
+ struct i2o_exec_lct_notify_work *work;
pr_debug("%s: LCT notify received\n", c->name);
@@ -418,8 +428,11 @@ static int i2o_exec_reply(struct i2o_controller *c, u32 m,
if (!work)
return -ENOMEM;
- INIT_WORK(work, (void (*)(void *))i2o_exec_lct_modified, c);
- queue_work(i2o_exec_driver.event_queue, work);
+ work->c = c;
+
+ INIT_WORK(&work->work, (void (*)(void *))i2o_exec_lct_modified,
+ work);
+ queue_work(i2o_exec_driver.event_queue, &work->work);
return 1;
}