aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/sdhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/sdhci.c')
-rw-r--r--drivers/mmc/sdhci.c47
1 files changed, 44 insertions, 3 deletions
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 77b7db27b55..877226e2ffa 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -128,9 +128,6 @@ static void sdhci_init(struct sdhci_host *host)
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- /* This is unknown magic. */
- writeb(0xE, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
}
static void sdhci_activate_led(struct sdhci_host *host)
@@ -274,6 +271,8 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
{
u16 mode;
+ u8 count;
+ unsigned target_timeout, current_timeout;
WARN_ON(host->data);
@@ -287,6 +286,37 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
DBG("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
+ /* timeout in us */
+ target_timeout = data->timeout_ns / 1000 +
+ data->timeout_clks / host->clock;
+
+ /*
+ * Figure out needed cycles.
+ * We do this in steps in order to fit inside a 32 bit int.
+ * The first step is the minimum timeout, which will have a
+ * minimum resolution of 6 bits:
+ * (1) 2^13*1000 > 2^22,
+ * (2) host->timeout_clk < 2^16
+ * =>
+ * (1) / (2) > 2^6
+ */
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < target_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ printk(KERN_WARNING "%s: Too large timeout requested!\n",
+ mmc_hostname(host->mmc));
+ count = 0xE;
+ }
+
+ writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
+
mode = SDHCI_TRNS_BLK_CNT_EN;
if (data->blocks > 1)
mode |= SDHCI_TRNS_MULTI;
@@ -1096,6 +1126,17 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
}
host->max_clk *= 1000000;
+ host->timeout_clk =
+ (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+ if (host->timeout_clk == 0) {
+ printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
+ "frequency.\n", host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+ if (caps & SDHCI_TIMEOUT_CLK_UNIT)
+ host->timeout_clk *= 1000;
+
/*
* Set host parameters.
*/