aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/card/block.c60
-rw-r--r--drivers/mmc/card/mmc_test.c569
-rw-r--r--drivers/mmc/card/sdio_uart.c9
-rw-r--r--drivers/mmc/core/core.c41
-rw-r--r--drivers/mmc/core/mmc.c2
-rw-r--r--drivers/mmc/core/sd.c6
-rw-r--r--drivers/mmc/core/sdio_cis.c6
-rw-r--r--drivers/mmc/core/sdio_io.c167
-rw-r--r--drivers/mmc/host/Kconfig50
-rw-r--r--drivers/mmc/host/Makefile4
-rw-r--r--drivers/mmc/host/at91_mci.c257
-rw-r--r--drivers/mmc/host/atmel-mci-regs.h91
-rw-r--r--drivers/mmc/host/atmel-mci.c981
-rw-r--r--drivers/mmc/host/au1xmmc.c792
-rw-r--r--drivers/mmc/host/au1xmmc.h96
-rw-r--r--drivers/mmc/host/imxmmc.c9
-rw-r--r--drivers/mmc/host/mmc_spi.c33
-rw-r--r--drivers/mmc/host/mmci.c1
-rw-r--r--drivers/mmc/host/omap.c2
-rw-r--r--drivers/mmc/host/pxamci.c9
-rw-r--r--drivers/mmc/host/s3cmci.c1446
-rw-r--r--drivers/mmc/host/s3cmci.h70
-rw-r--r--drivers/mmc/host/sdhci-pci.c732
-rw-r--r--drivers/mmc/host/sdhci.c994
-rw-r--r--drivers/mmc/host/sdhci.h120
-rw-r--r--drivers/mmc/host/sdricoh_cs.c575
-rw-r--r--drivers/mmc/host/tifm_sd.c2
-rw-r--r--drivers/mmc/host/wbsd.c38
28 files changed, 5889 insertions, 1273 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index f9ad960d7c1..66e5a5487c2 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2,7 +2,7 @@
* Block driver for media (i.e., flash cards)
*
* Copyright 2002 Hewlett-Packard Company
- * Copyright 2005-2007 Pierre Ossman
+ * Copyright 2005-2008 Pierre Ossman
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
@@ -237,17 +237,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
if (brq.data.blocks > card->host->max_blk_count)
brq.data.blocks = card->host->max_blk_count;
- /*
- * If the host doesn't support multiple block writes, force
- * block writes to single block. SD cards are excepted from
- * this rule as they support querying the number of
- * successfully written sectors.
- */
- if (rq_data_dir(req) != READ &&
- !(card->host->caps & MMC_CAP_MULTIWRITE) &&
- !mmc_card_sd(card))
- brq.data.blocks = 1;
-
if (brq.data.blocks > 1) {
/* SPI multiblock writes terminate using a special
* token, not a STOP_TRANSMISSION request.
@@ -296,22 +285,24 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
mmc_queue_bounce_post(mq);
+ /*
+ * Check for errors here, but don't jump to cmd_err
+ * until later as we need to wait for the card to leave
+ * programming mode even when things go wrong.
+ */
if (brq.cmd.error) {
printk(KERN_ERR "%s: error %d sending read/write command\n",
req->rq_disk->disk_name, brq.cmd.error);
- goto cmd_err;
}
if (brq.data.error) {
printk(KERN_ERR "%s: error %d transferring data\n",
req->rq_disk->disk_name, brq.data.error);
- goto cmd_err;
}
if (brq.stop.error) {
printk(KERN_ERR "%s: error %d sending stop command\n",
req->rq_disk->disk_name, brq.stop.error);
- goto cmd_err;
}
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
@@ -344,6 +335,9 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
#endif
}
+ if (brq.cmd.error || brq.data.error || brq.stop.error)
+ goto cmd_err;
+
/*
* A block was successfully transferred.
*/
@@ -362,30 +356,32 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
* mark the known good sectors as ok.
*
* If the card is not SD, we can still ok written sectors
- * if the controller can do proper error reporting.
+ * as reported by the controller (which might be less than
+ * the real number of written sectors, but never more).
*
* For reads we just fail the entire chunk as that should
* be safe in all cases.
*/
- if (rq_data_dir(req) != READ && mmc_card_sd(card)) {
- u32 blocks;
- unsigned int bytes;
-
- blocks = mmc_sd_num_wr_blocks(card);
- if (blocks != (u32)-1) {
- if (card->csd.write_partial)
- bytes = blocks << md->block_bits;
- else
- bytes = blocks << 9;
+ if (rq_data_dir(req) != READ) {
+ if (mmc_card_sd(card)) {
+ u32 blocks;
+ unsigned int bytes;
+
+ blocks = mmc_sd_num_wr_blocks(card);
+ if (blocks != (u32)-1) {
+ if (card->csd.write_partial)
+ bytes = blocks << md->block_bits;
+ else
+ bytes = blocks << 9;
+ spin_lock_irq(&md->lock);
+ ret = __blk_end_request(req, 0, bytes);
+ spin_unlock_irq(&md->lock);
+ }
+ } else {
spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0, bytes);
+ ret = __blk_end_request(req, 0, brq.data.bytes_xfered);
spin_unlock_irq(&md->lock);
}
- } else if (rq_data_dir(req) != READ &&
- (card->host->caps & MMC_CAP_MULTIWRITE)) {
- spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0, brq.data.bytes_xfered);
- spin_unlock_irq(&md->lock);
}
mmc_release_host(card->host);
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index ffadee549a4..d6b9b486417 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -1,7 +1,7 @@
/*
* linux/drivers/mmc/card/mmc_test.c
*
- * Copyright 2007 Pierre Ossman
+ * Copyright 2007-2008 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,13 +26,17 @@
struct mmc_test_card {
struct mmc_card *card;
+ u8 scratch[BUFFER_SIZE];
u8 *buffer;
};
/*******************************************************************/
-/* Helper functions */
+/* General helper functions */
/*******************************************************************/
+/*
+ * Configure correct block size in card
+ */
static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size)
{
struct mmc_command cmd;
@@ -48,117 +52,61 @@ static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size)
return 0;
}
-static int __mmc_test_transfer(struct mmc_test_card *test, int write,
- unsigned broken_xfer, u8 *buffer, unsigned addr,
- unsigned blocks, unsigned blksz)
+/*
+ * Fill in the mmc_request structure given a set of transfer parameters.
+ */
+static void mmc_test_prepare_mrq(struct mmc_test_card *test,
+ struct mmc_request *mrq, struct scatterlist *sg, unsigned sg_len,
+ unsigned dev_addr, unsigned blocks, unsigned blksz, int write)
{
- int ret, busy;
-
- struct mmc_request mrq;
- struct mmc_command cmd;
- struct mmc_command stop;
- struct mmc_data data;
-
- struct scatterlist sg;
-
- memset(&mrq, 0, sizeof(struct mmc_request));
-
- mrq.cmd = &cmd;
- mrq.data = &data;
-
- memset(&cmd, 0, sizeof(struct mmc_command));
+ BUG_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop);
- if (broken_xfer) {
- if (blocks > 1) {
- cmd.opcode = write ?
- MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
- } else {
- cmd.opcode = MMC_SEND_STATUS;
- }
+ if (blocks > 1) {
+ mrq->cmd->opcode = write ?
+ MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK;
} else {
- if (blocks > 1) {
- cmd.opcode = write ?
- MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK;
- } else {
- cmd.opcode = write ?
- MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
- }
+ mrq->cmd->opcode = write ?
+ MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
}
- if (broken_xfer && blocks == 1)
- cmd.arg = test->card->rca << 16;
- else
- cmd.arg = addr;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+ mrq->cmd->arg = dev_addr;
+ mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC;
- memset(&stop, 0, sizeof(struct mmc_command));
-
- if (!broken_xfer && (blocks > 1)) {
- stop.opcode = MMC_STOP_TRANSMISSION;
- stop.arg = 0;
- stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
-
- mrq.stop = &stop;
+ if (blocks == 1)
+ mrq->stop = NULL;
+ else {
+ mrq->stop->opcode = MMC_STOP_TRANSMISSION;
+ mrq->stop->arg = 0;
+ mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
}
- memset(&data, 0, sizeof(struct mmc_data));
-
- data.blksz = blksz;
- data.blocks = blocks;
- data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
- data.sg = &sg;
- data.sg_len = 1;
-
- sg_init_one(&sg, buffer, blocks * blksz);
-
- mmc_set_data_timeout(&data, test->card);
+ mrq->data->blksz = blksz;
+ mrq->data->blocks = blocks;
+ mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+ mrq->data->sg = sg;
+ mrq->data->sg_len = sg_len;
- mmc_wait_for_req(test->card->host, &mrq);
-
- ret = 0;
-
- if (broken_xfer) {
- if (!ret && cmd.error)
- ret = cmd.error;
- if (!ret && data.error == 0)
- ret = RESULT_FAIL;
- if (!ret && data.error != -ETIMEDOUT)
- ret = data.error;
- if (!ret && stop.error)
- ret = stop.error;
- if (blocks > 1) {
- if (!ret && data.bytes_xfered > blksz)
- ret = RESULT_FAIL;
- } else {
- if (!ret && data.bytes_xfered > 0)
- ret = RESULT_FAIL;
- }
- } else {
- if (!ret && cmd.error)
- ret = cmd.error;
- if (!ret && data.error)
- ret = data.error;
- if (!ret && stop.error)
- ret = stop.error;
- if (!ret && data.bytes_xfered != blocks * blksz)
- ret = RESULT_FAIL;
- }
+ mmc_set_data_timeout(mrq->data, test->card);
+}
- if (ret == -EINVAL)
- ret = RESULT_UNSUP_HOST;
+/*
+ * Wait for the card to finish the busy state
+ */
+static int mmc_test_wait_busy(struct mmc_test_card *test)
+{
+ int ret, busy;
+ struct mmc_command cmd;
busy = 0;
do {
- int ret2;
-
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_SEND_STATUS;
cmd.arg = test->card->rca << 16;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
- ret2 = mmc_wait_for_cmd(test->card->host, &cmd, 0);
- if (ret2)
+ ret = mmc_wait_for_cmd(test->card->host, &cmd, 0);
+ if (ret)
break;
if (!busy && !(cmd.resp[0] & R1_READY_FOR_DATA)) {
@@ -172,14 +120,57 @@ static int __mmc_test_transfer(struct mmc_test_card *test, int write,
return ret;
}
-static int mmc_test_transfer(struct mmc_test_card *test, int write,
- u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz)
+/*
+ * Transfer a single sector of kernel addressable data
+ */
+static int mmc_test_buffer_transfer(struct mmc_test_card *test,
+ u8 *buffer, unsigned addr, unsigned blksz, int write)
{
- return __mmc_test_transfer(test, write, 0, buffer,
- addr, blocks, blksz);
+ int ret;
+
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_command stop;
+ struct mmc_data data;
+
+ struct scatterlist sg;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+ memset(&stop, 0, sizeof(struct mmc_command));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+ mrq.stop = &stop;
+
+ sg_init_one(&sg, buffer, blksz);
+
+ mmc_test_prepare_mrq(test, &mrq, &sg, 1, addr, 1, blksz, write);
+
+ mmc_wait_for_req(test->card->host, &mrq);
+
+ if (cmd.error)
+ return cmd.error;
+ if (data.error)
+ return data.error;
+
+ ret = mmc_test_wait_busy(test);
+ if (ret)
+ return ret;
+
+ return 0;
}
-static int mmc_test_prepare_verify(struct mmc_test_card *test, int write)
+/*******************************************************************/
+/* Test preparation and cleanup */
+/*******************************************************************/
+
+/*
+ * Fill the first couple of sectors of the card with known data
+ * so that bad reads/writes can be detected
+ */
+static int __mmc_test_prepare(struct mmc_test_card *test, int write)
{
int ret, i;
@@ -188,15 +179,14 @@ static int mmc_test_prepare_verify(struct mmc_test_card *test, int write)
return ret;
if (write)
- memset(test->buffer, 0xDF, BUFFER_SIZE);
+ memset(test->buffer, 0xDF, 512);
else {
- for (i = 0;i < BUFFER_SIZE;i++)
+ for (i = 0;i < 512;i++)
test->buffer[i] = i;
}
for (i = 0;i < BUFFER_SIZE / 512;i++) {
- ret = mmc_test_transfer(test, 1, test->buffer + i * 512,
- i * 512, 1, 512);
+ ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1);
if (ret)
return ret;
}
@@ -204,41 +194,218 @@ static int mmc_test_prepare_verify(struct mmc_test_card *test, int write)
return 0;
}
-static int mmc_test_prepare_verify_write(struct mmc_test_card *test)
+static int mmc_test_prepare_write(struct mmc_test_card *test)
+{
+ return __mmc_test_prepare(test, 1);
+}
+
+static int mmc_test_prepare_read(struct mmc_test_card *test)
+{
+ return __mmc_test_prepare(test, 0);
+}
+
+static int mmc_test_cleanup(struct mmc_test_card *test)
{
- return mmc_test_prepare_verify(test, 1);
+ int ret, i;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ memset(test->buffer, 0, 512);
+
+ for (i = 0;i < BUFFER_SIZE / 512;i++) {
+ ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
-static int mmc_test_prepare_verify_read(struct mmc_test_card *test)
+/*******************************************************************/
+/* Test execution helpers */
+/*******************************************************************/
+
+/*
+ * Modifies the mmc_request to perform the "short transfer" tests
+ */
+static void mmc_test_prepare_broken_mrq(struct mmc_test_card *test,
+ struct mmc_request *mrq, int write)
{
- return mmc_test_prepare_verify(test, 0);
+ BUG_ON(!mrq || !mrq->cmd || !mrq->data);
+
+ if (mrq->data->blocks > 1) {
+ mrq->cmd->opcode = write ?
+ MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
+ mrq->stop = NULL;
+ } else {
+ mrq->cmd->opcode = MMC_SEND_STATUS;
+ mrq->cmd->arg = test->card->rca << 16;
+ }
}
-static int mmc_test_verified_transfer(struct mmc_test_card *test, int write,
- u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz)
+/*
+ * Checks that a normal transfer didn't have any errors
+ */
+static int mmc_test_check_result(struct mmc_test_card *test,
+ struct mmc_request *mrq)
{
- int ret, i, sectors;
+ int ret;
- /*
- * It is assumed that the above preparation has been done.
- */
+ BUG_ON(!mrq || !mrq->cmd || !mrq->data);
+
+ ret = 0;
- memset(test->buffer, 0, BUFFER_SIZE);
+ if (!ret && mrq->cmd->error)
+ ret = mrq->cmd->error;
+ if (!ret && mrq->data->error)
+ ret = mrq->data->error;
+ if (!ret && mrq->stop && mrq->stop->error)
+ ret = mrq->stop->error;
+ if (!ret && mrq->data->bytes_xfered !=
+ mrq->data->blocks * mrq->data->blksz)
+ ret = RESULT_FAIL;
+
+ if (ret == -EINVAL)
+ ret = RESULT_UNSUP_HOST;
+
+ return ret;
+}
+
+/*
+ * Checks that a "short transfer" behaved as expected
+ */
+static int mmc_test_check_broken_result(struct mmc_test_card *test,
+ struct mmc_request *mrq)
+{
+ int ret;
+
+ BUG_ON(!mrq || !mrq->cmd || !mrq->data);
+
+ ret = 0;
+
+ if (!ret && mrq->cmd->error)
+ ret = mrq->cmd->error;
+ if (!ret && mrq->data->error == 0)
+ ret = RESULT_FAIL;
+ if (!ret && mrq->data->error != -ETIMEDOUT)
+ ret = mrq->data->error;
+ if (!ret && mrq->stop && mrq->stop->error)
+ ret = mrq->stop->error;
+ if (mrq->data->blocks > 1) {
+ if (!ret && mrq->data->bytes_xfered > mrq->data->blksz)
+ ret = RESULT_FAIL;
+ } else {
+ if (!ret && mrq->data->bytes_xfered > 0)
+ ret = RESULT_FAIL;
+ }
+
+ if (ret == -EINVAL)
+ ret = RESULT_UNSUP_HOST;
+
+ return ret;
+}
+
+/*
+ * Tests a basic transfer with certain parameters
+ */
+static int mmc_test_simple_transfer(struct mmc_test_card *test,
+ struct scatterlist *sg, unsigned sg_len, unsigned dev_addr,
+ unsigned blocks, unsigned blksz, int write)
+{
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_command stop;
+ struct mmc_data data;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+ memset(&stop, 0, sizeof(struct mmc_command));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+ mrq.stop = &stop;
+
+ mmc_test_prepare_mrq(test, &mrq, sg, sg_len, dev_addr,
+ blocks, blksz, write);
+
+ mmc_wait_for_req(test->card->host, &mrq);
+
+ mmc_test_wait_busy(test);
+
+ return mmc_test_check_result(test, &mrq);
+}
+
+/*
+ * Tests a transfer where the card will fail completely or partly
+ */
+static int mmc_test_broken_transfer(struct mmc_test_card *test,
+ unsigned blocks, unsigned blksz, int write)
+{
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_command stop;
+ struct mmc_data data;
+
+ struct scatterlist sg;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+ memset(&stop, 0, sizeof(struct mmc_command));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+ mrq.stop = &stop;
+
+ sg_init_one(&sg, test->buffer, blocks * blksz);
+
+ mmc_test_prepare_mrq(test, &mrq, &sg, 1, 0, blocks, blksz, write);
+ mmc_test_prepare_broken_mrq(test, &mrq, write);
+
+ mmc_wait_for_req(test->card->host, &mrq);
+
+ mmc_test_wait_busy(test);
+
+ return mmc_test_check_broken_result(test, &mrq);
+}
+
+/*
+ * Does a complete transfer test where data is also validated
+ *
+ * Note: mmc_test_prepare() must have been done before this call
+ */
+static int mmc_test_transfer(struct mmc_test_card *test,
+ struct scatterlist *sg, unsigned sg_len, unsigned dev_addr,
+ unsigned blocks, unsigned blksz, int write)
+{
+ int ret, i;
+ unsigned long flags;
if (write) {
for (i = 0;i < blocks * blksz;i++)
- buffer[i] = i;
+ test->scratch[i] = i;
+ } else {
+ memset(test->scratch, 0, BUFFER_SIZE);
}
+ local_irq_save(flags);
+ sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
+ local_irq_restore(flags);
ret = mmc_test_set_blksize(test, blksz);
if (ret)
return ret;
- ret = mmc_test_transfer(test, write, buffer, addr, blocks, blksz);
+ ret = mmc_test_simple_transfer(test, sg, sg_len, dev_addr,
+ blocks, blksz, write);
if (ret)
return ret;
if (write) {
+ int sectors;
+
ret = mmc_test_set_blksize(test, 512);
if (ret)
return ret;
@@ -253,9 +420,9 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write,
memset(test->buffer, 0, sectors * 512);
for (i = 0;i < sectors;i++) {
- ret = mmc_test_transfer(test, 0,
+ ret = mmc_test_buffer_transfer(test,
test->buffer + i * 512,
- addr + i * 512, 1, 512);
+ dev_addr + i * 512, 512, 0);
if (ret)
return ret;
}
@@ -270,8 +437,11 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write,
return RESULT_FAIL;
}
} else {
+ local_irq_save(flags);
+ sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
+ local_irq_restore(flags);
for (i = 0;i < blocks * blksz;i++) {
- if (buffer[i] != (u8)i)
+ if (test->scratch[i] != (u8)i)
return RESULT_FAIL;
}
}
@@ -279,26 +449,6 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write,
return 0;
}
-static int mmc_test_cleanup_verify(struct mmc_test_card *test)
-{
- int ret, i;
-
- ret = mmc_test_set_blksize(test, 512);
- if (ret)
- return ret;
-
- memset(test->buffer, 0, BUFFER_SIZE);
-
- for (i = 0;i < BUFFER_SIZE / 512;i++) {
- ret = mmc_test_transfer(test, 1, test->buffer + i * 512,
- i * 512, 1, 512);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
/*******************************************************************/
/* Tests */
/*******************************************************************/
@@ -314,12 +464,15 @@ struct mmc_test_case {
static int mmc_test_basic_write(struct mmc_test_card *test)
{
int ret;
+ struct scatterlist sg;
ret = mmc_test_set_blksize(test, 512);
if (ret)
return ret;
- ret = mmc_test_transfer(test, 1, test->buffer, 0, 1, 512);
+ sg_init_one(&sg, test->buffer, 512);
+
+ ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
if (ret)
return ret;
@@ -329,12 +482,15 @@ static int mmc_test_basic_write(struct mmc_test_card *test)
static int mmc_test_basic_read(struct mmc_test_card *test)
{
int ret;
+ struct scatterlist sg;
ret = mmc_test_set_blksize(test, 512);
if (ret)
return ret;
- ret = mmc_test_transfer(test, 0, test->buffer, 0, 1, 512);
+ sg_init_one(&sg, test->buffer, 512);
+
+ ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
if (ret)
return ret;
@@ -344,8 +500,11 @@ static int mmc_test_basic_read(struct mmc_test_card *test)
static int mmc_test_verify_write(struct mmc_test_card *test)
{
int ret;
+ struct scatterlist sg;
+
+ sg_init_one(&sg, test->buffer, 512);
- ret = mmc_test_verified_transfer(test, 1, test->buffer, 0, 1, 512);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1);
if (ret)
return ret;
@@ -355,8 +514,11 @@ static int mmc_test_verify_write(struct mmc_test_card *test)
static int mmc_test_verify_read(struct mmc_test_card *test)
{
int ret;
+ struct scatterlist sg;
+
+ sg_init_one(&sg, test->buffer, 512);
- ret = mmc_test_verified_transfer(test, 0, test->buffer, 0, 1, 512);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0);
if (ret)
return ret;
@@ -367,6 +529,7 @@ static int mmc_test_multi_write(struct mmc_test_card *test)
{
int ret;
unsigned int size;
+ struct scatterlist sg;
if (test->card->host->max_blk_count == 1)
return RESULT_UNSUP_HOST;
@@ -379,8 +542,9 @@ static int mmc_test_multi_write(struct mmc_test_card *test)
if (size < 1024)
return RESULT_UNSUP_HOST;
- ret = mmc_test_verified_transfer(test, 1, test->buffer, 0,
- size / 512, 512);
+ sg_init_one(&sg, test->buffer, size);
+
+ ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
if (ret)
return ret;
@@ -391,6 +555,7 @@ static int mmc_test_multi_read(struct mmc_test_card *test)
{
int ret;
unsigned int size;
+ struct scatterlist sg;
if (test->card->host->max_blk_count == 1)
return RESULT_UNSUP_HOST;
@@ -403,8 +568,9 @@ static int mmc_test_multi_read(struct mmc_test_card *test)
if (size < 1024)
return RESULT_UNSUP_HOST;
- ret = mmc_test_verified_transfer(test, 0, test->buffer, 0,
- size / 512, 512);
+ sg_init_one(&sg, test->buffer, size);
+
+ ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
if (ret)
return ret;
@@ -414,13 +580,14 @@ static int mmc_test_multi_read(struct mmc_test_card *test)
static int mmc_test_pow2_write(struct mmc_test_card *test)
{
int ret, i;
+ struct scatterlist sg;
if (!test->card->csd.write_partial)
return RESULT_UNSUP_CARD;
for (i = 1; i < 512;i <<= 1) {
- ret = mmc_test_verified_transfer(test, 1,
- test->buffer, 0, 1, i);
+ sg_init_one(&sg, test->buffer, i);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1);
if (ret)
return ret;
}
@@ -431,13 +598,14 @@ static int mmc_test_pow2_write(struct mmc_test_card *test)
static int mmc_test_pow2_read(struct mmc_test_card *test)
{
int ret, i;
+ struct scatterlist sg;
if (!test->card->csd.read_partial)
return RESULT_UNSUP_CARD;
for (i = 1; i < 512;i <<= 1) {
- ret = mmc_test_verified_transfer(test, 0,
- test->buffer, 0, 1, i);
+ sg_init_one(&sg, test->buffer, i);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0);
if (ret)
return ret;
}
@@ -448,13 +616,14 @@ static int mmc_test_pow2_read(struct mmc_test_card *test)
static int mmc_test_weird_write(struct mmc_test_card *test)
{
int ret, i;
+ struct scatterlist sg;
if (!test->card->csd.write_partial)
return RESULT_UNSUP_CARD;
for (i = 3; i < 512;i += 7) {
- ret = mmc_test_verified_transfer(test, 1,
- test->buffer, 0, 1, i);
+ sg_init_one(&sg, test->buffer, i);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1);
if (ret)
return ret;
}
@@ -465,13 +634,14 @@ static int mmc_test_weird_write(struct mmc_test_card *test)
static int mmc_test_weird_read(struct mmc_test_card *test)
{
int ret, i;
+ struct scatterlist sg;
if (!test->card->csd.read_partial)
return RESULT_UNSUP_CARD;
for (i = 3; i < 512;i += 7) {
- ret = mmc_test_verified_transfer(test, 0,
- test->buffer, 0, 1, i);
+ sg_init_one(&sg, test->buffer, i);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0);
if (ret)
return ret;
}
@@ -482,10 +652,11 @@ static int mmc_test_weird_read(struct mmc_test_card *test)
static int mmc_test_align_write(struct mmc_test_card *test)
{
int ret, i;
+ struct scatterlist sg;
for (i = 1;i < 4;i++) {
- ret = mmc_test_verified_transfer(test, 1, test->buffer + i,
- 0, 1, 512);
+ sg_init_one(&sg, test->buffer + i, 512);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1);
if (ret)
return ret;
}
@@ -496,10 +667,11 @@ static int mmc_test_align_write(struct mmc_test_card *test)
static int mmc_test_align_read(struct mmc_test_card *test)
{
int ret, i;
+ struct scatterlist sg;
for (i = 1;i < 4;i++) {
- ret = mmc_test_verified_transfer(test, 0, test->buffer + i,
- 0, 1, 512);
+ sg_init_one(&sg, test->buffer + i, 512);
+ ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0);
if (ret)
return ret;
}
@@ -511,6 +683,7 @@ static int mmc_test_align_multi_write(struct mmc_test_card *test)
{
int ret, i;
unsigned int size;
+ struct scatterlist sg;
if (test->card->host->max_blk_count == 1)
return RESULT_UNSUP_HOST;
@@ -524,8 +697,8 @@ static int mmc_test_align_multi_write(struct mmc_test_card *test)
return RESULT_UNSUP_HOST;
for (i = 1;i < 4;i++) {
- ret = mmc_test_verified_transfer(test, 1, test->buffer + i,
- 0, size / 512, 512);
+ sg_init_one(&sg, test->buffer + i, size);
+ ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
if (ret)
return ret;
}
@@ -537,6 +710,7 @@ static int mmc_test_align_multi_read(struct mmc_test_card *test)
{
int ret, i;
unsigned int size;
+ struct scatterlist sg;
if (test->card->host->max_blk_count == 1)
return RESULT_UNSUP_HOST;
@@ -550,8 +724,8 @@ static int mmc_test_align_multi_read(struct mmc_test_card *test)
return RESULT_UNSUP_HOST;
for (i = 1;i < 4;i++) {
- ret = mmc_test_verified_transfer(test, 0, test->buffer + i,
- 0, size / 512, 512);
+ sg_init_one(&sg, test->buffer + i, size);
+ ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
if (ret)
return ret;
}
@@ -567,7 +741,7 @@ static int mmc_test_xfersize_write(struct mmc_test_card *test)
if (ret)
return ret;
- ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 1, 512);
+ ret = mmc_test_broken_transfer(test, 1, 512, 1);
if (ret)
return ret;
@@ -582,7 +756,7 @@ static int mmc_test_xfersize_read(struct mmc_test_card *test)
if (ret)
return ret;
- ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 1, 512);
+ ret = mmc_test_broken_transfer(test, 1, 512, 0);
if (ret)
return ret;
@@ -600,7 +774,7 @@ static int mmc_test_multi_xfersize_write(struct mmc_test_card *test)
if (ret)
return ret;
- ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 2, 512);
+ ret = mmc_test_broken_transfer(test, 2, 512, 1);
if (ret)
return ret;
@@ -618,7 +792,7 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
if (ret)
return ret;
- ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 2, 512);
+ ret = mmc_test_broken_transfer(test, 2, 512, 0);
if (ret)
return ret;
@@ -638,86 +812,86 @@ static const struct mmc_test_case mmc_test_cases[] = {
{
.name = "Basic write (with data verification)",
- .prepare = mmc_test_prepare_verify_write,
+ .prepare = mmc_test_prepare_write,
.run = mmc_test_verify_write,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Basic read (with data verification)",
- .prepare = mmc_test_prepare_verify_read,
+ .prepare = mmc_test_prepare_read,
.run = mmc_test_verify_read,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Multi-block write",
- .prepare = mmc_test_prepare_verify_write,
+ .prepare = mmc_test_prepare_write,
.run = mmc_test_multi_write,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Multi-block read",
- .prepare = mmc_test_prepare_verify_read,
+ .prepare = mmc_test_prepare_read,
.run = mmc_test_multi_read,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Power of two block writes",
- .prepare = mmc_test_prepare_verify_write,
+ .prepare = mmc_test_prepare_write,
.run = mmc_test_pow2_write,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Power of two block reads",
- .prepare = mmc_test_prepare_verify_read,
+ .prepare = mmc_test_prepare_read,
.run = mmc_test_pow2_read,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Weird sized block writes",
- .prepare = mmc_test_prepare_verify_write,
+ .prepare = mmc_test_prepare_write,
.run = mmc_test_weird_write,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Weird sized block reads",
- .prepare = mmc_test_prepare_verify_read,
+ .prepare = mmc_test_prepare_read,
.run = mmc_test_weird_read,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Badly aligned write",
- .prepare = mmc_test_prepare_verify_write,
+ .prepare = mmc_test_prepare_write,
.run = mmc_test_align_write,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Badly aligned read",
- .prepare = mmc_test_prepare_verify_read,
+ .prepare = mmc_test_prepare_read,
.run = mmc_test_align_read,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Badly aligned multi-block write",
- .prepare = mmc_test_prepare_verify_write,
+ .prepare = mmc_test_prepare_write,
.run = mmc_test_align_multi_write,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
.name = "Badly aligned multi-block read",
- .prepare = mmc_test_prepare_verify_read,
+ .prepare = mmc_test_prepare_read,
.run = mmc_test_align_multi_read,
- .cleanup = mmc_test_cleanup_verify,
+ .cleanup = mmc_test_cleanup,
},
{
@@ -743,7 +917,7 @@ static const struct mmc_test_case mmc_test_cases[] = {
static struct mutex mmc_test_lock;
-static void mmc_test_run(struct mmc_test_card *test)
+static void mmc_test_run(struct mmc_test_card *test, int testcase)
{
int i, ret;
@@ -753,6 +927,9 @@ static void mmc_test_run(struct mmc_test_card *test)
mmc_claim_host(test->card->host);
for (i = 0;i < ARRAY_SIZE(mmc_test_cases);i++) {
+ if (testcase && ((i + 1) != testcase))
+ continue;
+
printk(KERN_INFO "%s: Test case %d. %s...\n",
mmc_hostname(test->card->host), i + 1,
mmc_test_cases[i].name);
@@ -824,9 +1001,12 @@ static ssize_t mmc_test_store(struct device *dev,
{
struct mmc_card *card;
struct mmc_test_card *test;
+ int testcase;
card = container_of(dev, struct mmc_card, dev);
+ testcase = simple_strtol(buf, NULL, 10);
+
test = kzalloc(sizeof(struct mmc_test_card), GFP_KERNEL);
if (!test)
return -ENOMEM;
@@ -836,7 +1016,7 @@ static ssize_t mmc_test_store(struct device *dev,
test->buffer = kzalloc(BUFFER_SIZE, GFP_KERNEL);
if (test->buffer) {
mutex_lock(&mmc_test_lock);
- mmc_test_run(test);
+ mmc_test_run(test, testcase);
mutex_unlock(&mmc_test_lock);
}
@@ -852,6 +1032,9 @@ static int mmc_test_probe(struct mmc_card *card)
{
int ret;
+ if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD))
+ return -ENODEV;
+
mutex_init(&mmc_test_lock);
ret = device_create_file(&card->dev, &dev_attr_test);
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index eeea84c309e..78ad48718ab 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -885,12 +885,14 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_t
sdio_uart_release_func(port);
}
-static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
+static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
{
struct sdio_uart_port *port = tty->driver_data;
+ int result;
- if (sdio_uart_claim_func(port) != 0)
- return;
+ result = sdio_uart_claim_func(port);
+ if (result != 0)
+ return result;
if (break_state == -1)
port->lcr |= UART_LCR_SBC;
@@ -899,6 +901,7 @@ static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
sdio_out(port, UART_LCR, port->lcr);
sdio_uart_release_func(port);
+ return 0;
}
static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 01ced4c5a61..3ee5b8c3b5c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2003-2004 Russell King, All Rights Reserved.
* SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
- * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
* MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
@@ -295,6 +295,33 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
EXPORT_SYMBOL(mmc_set_data_timeout);
/**
+ * mmc_align_data_size - pads a transfer size to a more optimal value
+ * @card: the MMC card associated with the data transfer
+ * @sz: original transfer size
+ *
+ * Pads the original data size with a number of extra bytes in
+ * order to avoid controller bugs and/or performance hits
+ * (e.g. some controllers revert to PIO for certain sizes).
+ *
+ * Returns the improved size, which might be unmodified.
+ *
+ * Note that this function is only relevant when issuing a
+ * single scatter gather entry.
+ */
+unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz)
+{
+ /*
+ * FIXME: We don't have a system for the controller to tell
+ * the core about its problems yet, so for now we just 32-bit
+ * align the size.
+ */
+ sz = ((sz + 3) / 4) * 4;
+
+ return sz;
+}
+EXPORT_SYMBOL(mmc_align_data_size);
+
+/**
* __mmc_claim_host - exclusively claim a host
* @host: mmc host to claim
* @abort: whether or not the operation should be aborted
@@ -638,6 +665,9 @@ void mmc_rescan(struct work_struct *work)
*/
mmc_bus_put(host);
+ if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+ goto out;
+
mmc_claim_host(host);
mmc_power_up(host);
@@ -652,7 +682,7 @@ void mmc_rescan(struct work_struct *work)
if (!err) {
if (mmc_attach_sdio(host, ocr))
mmc_power_off(host);
- return;
+ goto out;
}
/*
@@ -662,7 +692,7 @@ void mmc_rescan(struct work_struct *work)
if (!err) {
if (mmc_attach_sd(host, ocr))
mmc_power_off(host);
- return;
+ goto out;
}
/*
@@ -672,7 +702,7 @@ void mmc_rescan(struct work_struct *work)
if (!err) {
if (mmc_attach_mmc(host, ocr))
mmc_power_off(host);
- return;
+ goto out;
}
mmc_release_host(host);
@@ -683,6 +713,9 @@ void mmc_rescan(struct work_struct *work)
mmc_bus_put(host);
}
+out:
+ if (host->caps & MMC_CAP_NEEDS_POLL)
+ mmc_schedule_delayed_work(&host->detect, HZ);
}
void mmc_start_host(struct mmc_host *host)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3da29eef8f7..fdd7c760be8 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -288,7 +288,7 @@ static struct device_type mmc_type = {
/*
* Handle the detection and initialisation of a card.
*
- * In the case of a resume, "curcard" will contain the card
+ * In the case of a resume, "oldcard" will contain the card
* we're trying to reinitialise.
*/
static int mmc_init_card(struct mmc_host *host, u32 ocr,
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 7ef3b15c5e3..26fc098d77c 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -326,7 +326,7 @@ static struct device_type sd_type = {
/*
* Handle the detection and initialisation of a card.
*
- * In the case of a resume, "curcard" will contain the card
+ * In the case of a resume, "oldcard" will contain the card
* we're trying to reinitialise.
*/
static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
@@ -494,13 +494,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
* Check if read-only switch is active.
*/
if (!oldcard) {
- if (!host->ops->get_ro) {
+ if (!host->ops->get_ro || host->ops->get_ro(host) < 0) {
printk(KERN_WARNING "%s: host does not "
"support reading read-only "
"switch. assuming write-enable.\n",
mmc_hostname(host));
} else {
- if (host->ops->get_ro(host))
+ if (host->ops->get_ro(host) > 0)
mmc_card_set_readonly(card);
}
}
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index d5e51b1c7b3..956bd767750 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -129,6 +129,12 @@ static int cistpl_funce_func(struct sdio_func *func,
/* TPLFE_MAX_BLK_SIZE */
func->max_blksize = buf[12] | (buf[13] << 8);
+ /* TPLFE_ENABLE_TIMEOUT_VAL, present in ver 1.1 and above */
+ if (vsn > SDIO_SDIO_REV_1_00)
+ func->enable_timeout = (buf[28] | (buf[29] << 8)) * 10;
+ else
+ func->enable_timeout = jiffies_to_msecs(HZ);
+
return 0;
}
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 625b92ce9ce..f61fc2d4cd0 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -1,7 +1,7 @@
/*
* linux/drivers/mmc/core/sdio_io.c
*
- * Copyright 2007 Pierre Ossman
+ * Copyright 2007-2008 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -76,11 +76,7 @@ int sdio_enable_func(struct sdio_func *func)
if (ret)
goto err;
- /*
- * FIXME: This should timeout based on information in the CIS,
- * but we don't have card to parse that yet.
- */
- timeout = jiffies + HZ;
+ timeout = jiffies + msecs_to_jiffies(func->enable_timeout);
while (1) {
ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, &reg);
@@ -167,10 +163,8 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz)
return -EINVAL;
if (blksz == 0) {
- blksz = min(min(
- func->max_blksize,
- func->card->host->max_blk_size),
- 512u);
+ blksz = min(func->max_blksize, func->card->host->max_blk_size);
+ blksz = min(blksz, 512u);
}
ret = mmc_io_rw_direct(func->card, 1, 0,
@@ -186,9 +180,116 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz)
func->cur_blksize = blksz;
return 0;
}
-
EXPORT_SYMBOL_GPL(sdio_set_block_size);
+/*
+ * Calculate the maximum byte mode transfer size
+ */
+static inline unsigned int sdio_max_byte_size(struct sdio_func *func)
+{
+ unsigned mval = min(func->card->host->max_seg_size,
+ func->card->host->max_blk_size);
+ mval = min(mval, func->max_blksize);
+ return min(mval, 512u); /* maximum size for byte mode */
+}
+
+/**
+ * sdio_align_size - pads a transfer size to a more optimal value
+ * @func: SDIO function
+ * @sz: original transfer size
+ *
+ * Pads the original data size with a number of extra bytes in
+ * order to avoid controller bugs and/or performance hits
+ * (e.g. some controllers revert to PIO for certain sizes).
+ *
+ * If possible, it will also adjust the size so that it can be
+ * handled in just a single request.
+ *
+ * Returns the improved size, which might be unmodified.
+ */
+unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz)
+{
+ unsigned int orig_sz;
+ unsigned int blk_sz, byte_sz;
+ unsigned chunk_sz;
+
+ orig_sz = sz;
+
+ /*
+ * Do a first check with the controller, in case it
+ * wants to increase the size up to a point where it
+ * might need more than one block.
+ */
+ sz = mmc_align_data_size(func->card, sz);
+
+ /*
+ * If we can still do this with just a byte transfer, then
+ * we're done.
+ */
+ if (sz <= sdio_max_byte_size(func))
+ return sz;
+
+ if (func->card->cccr.multi_block) {
+ /*
+ * Check if the transfer is already block aligned
+ */
+ if ((sz % func->cur_blksize) == 0)
+ return sz;
+
+ /*
+ * Realign it so that it can be done with one request,
+ * and recheck if the controller still likes it.
+ */
+ blk_sz = ((sz + func->cur_blksize - 1) /
+ func->cur_blksize) * func->cur_blksize;
+ blk_sz = mmc_align_data_size(func->card, blk_sz);
+
+ /*
+ * This value is only good if it is still just
+ * one request.
+ */
+ if ((blk_sz % func->cur_blksize) == 0)
+ return blk_sz;
+
+ /*
+ * We failed to do one request, but at least try to
+ * pad the remainder properly.
+ */
+ byte_sz = mmc_align_data_size(func->card,
+ sz % func->cur_blksize);
+ if (byte_sz <= sdio_max_byte_size(func)) {
+ blk_sz = sz / func->cur_blksize;
+ return blk_sz * func->cur_blksize + byte_sz;
+ }
+ } else {
+ /*
+ * We need multiple requests, so first check that the
+ * controller can handle the chunk size;
+ */
+ chunk_sz = mmc_align_data_size(func->card,
+ sdio_max_byte_size(func));
+ if (chunk_sz == sdio_max_byte_size(func)) {
+ /*
+ * Fix up the size of the remainder (if any)
+ */
+ byte_sz = orig_sz % chunk_sz;
+ if (byte_sz) {
+ byte_sz = mmc_align_data_size(func->card,
+ byte_sz);
+ }
+
+ return (orig_sz / chunk_sz) * chunk_sz + byte_sz;
+ }
+ }
+
+ /*
+ * The controller is simply incapable of transferring the size
+ * we want in decent manner, so just return the original size.
+ */
+ return orig_sz;
+}
+EXPORT_SYMBOL_GPL(sdio_align_size);
+
/* Split an arbitrarily sized data transfer into several
* IO_RW_EXTENDED commands. */
static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
@@ -199,14 +300,13 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
int ret;
/* Do the bulk of the transfer using block mode (if supported). */
- if (func->card->cccr.multi_block) {
+ if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) {
/* Blocks per command is limited by host count, host transfer
* size (we only use a single sg entry) and the maximum for
* IO_RW_EXTENDED of 511 blocks. */
- max_blocks = min(min(
- func->card->host->max_blk_count,
- func->card->host->max_seg_size / func->cur_blksize),
- 511u);
+ max_blocks = min(func->card->host->max_blk_count,
+ func->card->host->max_seg_size / func->cur_blksize);
+ max_blocks = min(max_blocks, 511u);
while (remainder > func->cur_blksize) {
unsigned blocks;
@@ -231,11 +331,7 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
/* Write the remainder using byte mode. */
while (remainder > 0) {
- size = remainder;
- if (size > func->cur_blksize)
- size = func->cur_blksize;
- if (size > 512)
- size = 512; /* maximum size for byte mode */
+ size = min(remainder, sdio_max_byte_size(func));
ret = mmc_io_rw_extended(func->card, write, func->num, addr,
incr_addr, buf, 1, size);
@@ -260,11 +356,10 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
* function. If there is a problem reading the address, 0xff
* is returned and @err_ret will contain the error code.
*/
-unsigned char sdio_readb(struct sdio_func *func, unsigned int addr,
- int *err_ret)
+u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret)
{
int ret;
- unsigned char val;
+ u8 val;
BUG_ON(!func);
@@ -293,8 +388,7 @@ EXPORT_SYMBOL_GPL(sdio_readb);
* function. @err_ret will contain the status of the actual
* transfer.
*/
-void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr,
- int *err_ret)
+void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret)
{
int ret;
@@ -355,7 +449,6 @@ int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr,
{
return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count);
}
-
EXPORT_SYMBOL_GPL(sdio_readsb);
/**
@@ -385,8 +478,7 @@ EXPORT_SYMBOL_GPL(sdio_writesb);
* function. If there is a problem reading the address, 0xffff
* is returned and @err_ret will contain the error code.
*/
-unsigned short sdio_readw(struct sdio_func *func, unsigned int addr,
- int *err_ret)
+u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret)
{
int ret;
@@ -400,7 +492,7 @@ unsigned short sdio_readw(struct sdio_func *func, unsigned int addr,
return 0xFFFF;
}
- return le16_to_cpu(*(u16*)func->tmpbuf);
+ return le16_to_cpup((__le16 *)func->tmpbuf);
}
EXPORT_SYMBOL_GPL(sdio_readw);
@@ -415,12 +507,11 @@ EXPORT_SYMBOL_GPL(sdio_readw);
* function. @err_ret will contain the status of the actual
* transfer.
*/
-void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr,
- int *err_ret)
+void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret)
{
int ret;
- *(u16*)func->tmpbuf = cpu_to_le16(b);
+ *(__le16 *)func->tmpbuf = cpu_to_le16(b);
ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2);
if (err_ret)
@@ -439,8 +530,7 @@ EXPORT_SYMBOL_GPL(sdio_writew);
* 0xffffffff is returned and @err_ret will contain the error
* code.
*/
-unsigned long sdio_readl(struct sdio_func *func, unsigned int addr,
- int *err_ret)
+u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret)
{
int ret;
@@ -454,7 +544,7 @@ unsigned long sdio_readl(struct sdio_func *func, unsigned int addr,
return 0xFFFFFFFF;
}
- return le32_to_cpu(*(u32*)func->tmpbuf);
+ return le32_to_cpup((__le32 *)func->tmpbuf);
}
EXPORT_SYMBOL_GPL(sdio_readl);
@@ -469,12 +559,11 @@ EXPORT_SYMBOL_GPL(sdio_readl);
* function. @err_ret will contain the status of the actual
* transfer.
*/
-void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr,
- int *err_ret)
+void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret)
{
int ret;
- *(u32*)func->tmpbuf = cpu_to_le32(b);
+ *(__le32 *)func->tmpbuf = cpu_to_le32(b);
ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4);
if (err_ret)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dead61754ad..dc6f2579f85 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -26,18 +26,31 @@ config MMC_PXA
config MMC_SDHCI
tristate "Secure Digital Host Controller Interface support"
- depends on PCI
+ depends on HAS_DMA
help
- This select the generic Secure Digital Host Controller Interface.
+ This selects the generic Secure Digital Host Controller Interface.
It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
and Toshiba(R). Most controllers found in laptops are of this type.
+
+ If you have a controller with this interface, say Y or M here. You
+ also need to enable an appropriate bus interface.
+
+ If unsure, say N.
+
+config MMC_SDHCI_PCI
+ tristate "SDHCI support on PCI bus"
+ depends on MMC_SDHCI && PCI
+ help
+ This selects the PCI Secure Digital Host Controller Interface.
+ Most controllers found today are PCI devices.
+
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_RICOH_MMC
tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL && MMC_SDHCI
+ depends on MMC_SDHCI_PCI
help
This selects the disabler for the Ricoh MMC Controller. This
proprietary controller is unnecessary because the SDHCI driver
@@ -91,6 +104,16 @@ config MMC_AT91
If unsure, say N.
+config MMC_ATMELMCI
+ tristate "Atmel Multimedia Card Interface support"
+ depends on AVR32
+ help
+ This selects the Atmel Multimedia Card Interface driver. If
+ you have an AT32 (AVR32) platform with a Multimedia Card
+ slot, say Y or M here.
+
+ If unsure, say N.
+
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
depends on ARCH_IMX
@@ -130,3 +153,24 @@ config MMC_SPI
If unsure, or if your system has no SPI master driver, say N.
+config MMC_S3C
+ tristate "Samsung S3C SD/MMC Card Interface support"
+ depends on ARCH_S3C2410 && MMC
+ help
+ This selects a driver for the MCI interface found in
+ Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
+ If you have a board based on one of those and a MMC/SD
+ slot, say Y or M here.
+
+ If unsure, say N.
+
+config MMC_SDRICOH_CS
+ tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MMC && PCI && PCMCIA
+ help
+ Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
+ card whenever you insert a MMC or SD card into the card slot.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sdricoh_cs.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3877c87e6da..db52eebfb50 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -10,11 +10,15 @@ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+obj-$(CONFIG_MMC_S3C) += s3cmci.o
+obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 8979ad330a4..f15e2064305 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -125,9 +125,72 @@ struct at91mci_host
/* Latest in the scatterlist that has been enabled for transfer */
int transfer_index;
+
+ /* Timer for timeouts */
+ struct timer_list timer;
};
/*
+ * Reset the controller and restore most of the state
+ */
+static void at91_reset_host(struct at91mci_host *host)
+{
+ unsigned long flags;
+ u32 mr;
+ u32 sdcr;
+ u32 dtor;
+ u32 imr;
+
+ local_irq_save(flags);
+ imr = at91_mci_read(host, AT91_MCI_IMR);
+
+ at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+
+ /* save current state */
+ mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
+ sdcr = at91_mci_read(host, AT91_MCI_SDCR);
+ dtor = at91_mci_read(host, AT91_MCI_DTOR);
+
+ /* reset the controller */
+ at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
+
+ /* restore state */
+ at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
+ at91_mci_write(host, AT91_MCI_MR, mr);
+ at91_mci_write(host, AT91_MCI_SDCR, sdcr);
+ at91_mci_write(host, AT91_MCI_DTOR, dtor);
+ at91_mci_write(host, AT91_MCI_IER, imr);
+
+ /* make sure sdio interrupts will fire */
+ at91_mci_read(host, AT91_MCI_SR);
+
+ local_irq_restore(flags);
+}
+
+static void at91_timeout_timer(unsigned long data)
+{
+ struct at91mci_host *host;
+
+ host = (struct at91mci_host *)data;
+
+ if (host->request) {
+ dev_err(host->mmc->parent, "Timeout waiting end of packet\n");
+
+ if (host->cmd && host->cmd->data) {
+ host->cmd->data->error = -ETIMEDOUT;
+ } else {
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->request->cmd->error = -ETIMEDOUT;
+ }
+
+ at91_reset_host(host);
+ mmc_request_done(host->mmc, host->request);
+ }
+}
+
+/*
* Copy from sg to a dma block - used for transfers
*/
static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
@@ -135,9 +198,14 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
unsigned int len, i, size;
unsigned *dmabuf = host->buffer;
- size = host->total_length;
+ size = data->blksz * data->blocks;
len = data->sg_len;
+ /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */
+ if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+ if (host->total_length == 12)
+ memset(dmabuf, 0, 12);
+
/*
* Just loop through all entries. Size might not
* be the entire list though so make sure that
@@ -159,9 +227,10 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
for (index = 0; index < (amount / 4); index++)
*dmabuf++ = swab32(sgbuffer[index]);
- }
- else
+ } else {
memcpy(dmabuf, sgbuffer, amount);
+ dmabuf += amount;
+ }
kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
@@ -233,11 +302,11 @@ static void at91_mci_pre_dma_read(struct at91mci_host *host)
if (i == 0) {
at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
- at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
}
else {
at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
- at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RNCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
}
}
@@ -277,8 +346,6 @@ static void at91_mci_post_dma_read(struct at91mci_host *host)
dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE);
- data->bytes_xfered += sg->length;
-
if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */
unsigned int *buffer;
int index;
@@ -294,6 +361,8 @@ static void at91_mci_post_dma_read(struct at91mci_host *host)
}
flush_dcache_page(sg_page(sg));
+
+ data->bytes_xfered += sg->length;
}
/* Is there another transfer to trigger? */
@@ -334,10 +403,32 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
} else
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+}
+
+/*
+ * Update bytes tranfered count during a write operation
+ */
+static void at91_mci_update_bytes_xfered(struct at91mci_host *host)
+{
+ struct mmc_data *data;
+
+ /* always deal with the effective request (and not the current cmd) */
+
+ if (host->request->cmd && host->request->cmd->error != 0)
+ return;
- data->bytes_xfered = host->total_length;
+ if (host->request->data) {
+ data = host->request->data;
+ if (data->flags & MMC_DATA_WRITE) {
+ /* card is in IDLE mode now */
+ pr_debug("-> bytes_xfered %d, total_length = %d\n",
+ data->bytes_xfered, host->total_length);
+ data->bytes_xfered = data->blksz * data->blocks;
+ }
+ }
}
+
/*Handle after command sent ready*/
static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
{
@@ -350,8 +441,7 @@ static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
} else return 1;
} else if (host->cmd->data->flags & MMC_DATA_WRITE) {
/*After sendding multi-block-write command, start DMA transfer*/
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE);
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
}
@@ -430,11 +520,19 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
if (data) {
- if ( data->blksz & 0x3 ) {
- pr_debug("Unsupported block size\n");
- cmd->error = -EINVAL;
- mmc_request_done(host->mmc, host->request);
- return;
+ if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) {
+ if (data->blksz & 0x3) {
+ pr_debug("Unsupported block size\n");
+ cmd->error = -EINVAL;
+ mmc_request_done(host->mmc, host->request);
+ return;
+ }
+ if (data->flags & MMC_DATA_STREAM) {
+ pr_debug("Stream commands not supported\n");
+ cmd->error = -EINVAL;
+ mmc_request_done(host->mmc, host->request);
+ return;
+ }
}
block_length = data->blksz;
@@ -481,8 +579,16 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
ier = AT91_MCI_CMDRDY;
} else {
/* zero block length and PDC mode */
- mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
- at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
+ mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff;
+ mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0;
+ mr |= (block_length << 16);
+ mr |= AT91_MCI_PDCMODE;
+ at91_mci_write(host, AT91_MCI_MR, mr);
+
+ if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261()))
+ at91_mci_write(host, AT91_MCI_BLKR,
+ AT91_MCI_BLKR_BCNT(blocks) |
+ AT91_MCI_BLKR_BLKLEN(block_length));
/*
* Disable the PDC controller
@@ -508,6 +614,13 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
* Handle a write
*/
host->total_length = block_length * blocks;
+ /*
+ * AT91SAM926[0/3] Data Write Operation and
+ * number of bytes erratum
+ */
+ if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
+ if (host->total_length < 12)
+ host->total_length = 12;
host->buffer = dma_alloc_coherent(NULL,
host->total_length,
&host->physical_address, GFP_KERNEL);
@@ -517,7 +630,9 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
pr_debug("Transmitting %d bytes\n", host->total_length);
at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
- at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
+ at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ?
+ host->total_length : host->total_length / 4);
+
ier = AT91_MCI_CMDRDY;
}
}
@@ -552,20 +667,26 @@ static void at91_mci_process_next(struct at91mci_host *host)
else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
host->flags |= FL_SENT_STOP;
at91_mci_send_command(host, host->request->stop);
- }
- else
+ } else {
+ del_timer(&host->timer);
+ /* the at91rm9200 mci controller hangs after some transfers,
+ * and the workaround is to reset it after each transfer.
+ */
+ if (cpu_is_at91rm9200())
+ at91_reset_host(host);
mmc_request_done(host->mmc, host->request);
+ }
}
/*
* Handle a command that has been completed
*/
-static void at91_mci_completed_command(struct at91mci_host *host)
+static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status)
{
struct mmc_command *cmd = host->cmd;
- unsigned int status;
+ struct mmc_data *data = cmd->data;
- at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+ at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
@@ -577,25 +698,34 @@ static void at91_mci_completed_command(struct at91mci_host *host)
host->buffer = NULL;
}
- status = at91_mci_read(host, AT91_MCI_SR);
-
- pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
- status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+ pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n",
+ status, at91_mci_read(host, AT91_MCI_SR),
+ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
if (status & AT91_MCI_ERRORS) {
if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
cmd->error = 0;
}
else {
- if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE))
- cmd->error = -ETIMEDOUT;
- else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE))
- cmd->error = -EILSEQ;
- else
- cmd->error = -EIO;
+ if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) {
+ if (data) {
+ if (status & AT91_MCI_DTOE)
+ data->error = -ETIMEDOUT;
+ else if (status & AT91_MCI_DCRCE)
+ data->error = -EILSEQ;
+ }
+ } else {
+ if (status & AT91_MCI_RTOE)
+ cmd->error = -ETIMEDOUT;
+ else if (status & AT91_MCI_RCRCE)
+ cmd->error = -EILSEQ;
+ else
+ cmd->error = -EIO;
+ }
- pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n",
- cmd->error, cmd->opcode, cmd->retries);
+ pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n",
+ cmd->error, data ? data->error : 0,
+ cmd->opcode, cmd->retries);
}
}
else
@@ -613,6 +743,8 @@ static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->request = mrq;
host->flags = 0;
+ mod_timer(&host->timer, jiffies + HZ);
+
at91_mci_process_next(host);
}
@@ -736,6 +868,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
if (int_status & AT91_MCI_NOTBUSY) {
pr_debug("Card is ready\n");
+ at91_mci_update_bytes_xfered(host);
completed = 1;
}
@@ -744,9 +877,21 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
if (int_status & AT91_MCI_BLKE) {
pr_debug("Block transfer has ended\n");
- completed = 1;
+ if (host->request->data && host->request->data->blocks > 1) {
+ /* multi block write : complete multi write
+ * command and send stop */
+ completed = 1;
+ } else {
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+ }
}
+ if (int_status & AT91_MCI_SDIOIRQA)
+ mmc_signal_sdio_irq(host->mmc);
+
+ if (int_status & AT91_MCI_SDIOIRQB)
+ mmc_signal_sdio_irq(host->mmc);
+
if (int_status & AT91_MCI_TXRDY)
pr_debug("Ready to transmit\n");
@@ -761,10 +906,10 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
if (completed) {
pr_debug("Completed command\n");
- at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
- at91_mci_completed_command(host);
+ at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
+ at91_mci_completed_command(host, int_status);
} else
- at91_mci_write(host, AT91_MCI_IDR, int_status);
+ at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
return IRQ_HANDLED;
}
@@ -793,25 +938,33 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
static int at91_mci_get_ro(struct mmc_host *mmc)
{
- int read_only = 0;
struct at91mci_host *host = mmc_priv(mmc);
- if (host->board->wp_pin) {
- read_only = gpio_get_value(host->board->wp_pin);
- printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
- (read_only ? "read-only" : "read-write") );
- }
- else {
- printk(KERN_WARNING "%s: host does not support reading read-only "
- "switch. Assuming write-enable.\n", mmc_hostname(mmc));
- }
- return read_only;
+ if (host->board->wp_pin)
+ return !!gpio_get_value(host->board->wp_pin);
+ /*
+ * Board doesn't support read only detection; let the mmc core
+ * decide what to do.
+ */
+ return -ENOSYS;
+}
+
+static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct at91mci_host *host = mmc_priv(mmc);
+
+ pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc),
+ host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
+ at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR,
+ host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
+
}
static const struct mmc_host_ops at91_mci_ops = {
.request = at91_mci_request,
.set_ios = at91_mci_set_ios,
.get_ro = at91_mci_get_ro,
+ .enable_sdio_irq = at91_mci_enable_sdio_irq,
};
/*
@@ -842,6 +995,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
mmc->f_min = 375000;
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->caps = MMC_CAP_SDIO_IRQ;
mmc->max_blk_size = 4095;
mmc->max_blk_count = mmc->max_req_size;
@@ -935,6 +1089,8 @@ static int __init at91_mci_probe(struct platform_device *pdev)
mmc_add_host(mmc);
+ setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
+
/*
* monitor card insertion/removal if we can
*/
@@ -995,6 +1151,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
}
at91_mci_disable(host);
+ del_timer_sync(&host->timer);
mmc_remove_host(mmc);
free_irq(host->irq, host);
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
new file mode 100644
index 00000000000..a9a5657706c
--- /dev/null
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -0,0 +1,91 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
+#define __DRIVERS_MMC_ATMEL_MCI_H__
+
+/* MCI Register Definitions */
+#define MCI_CR 0x0000 /* Control */
+# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
+# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
+# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */
+#define MCI_MR 0x0004 /* Mode */
+# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
+# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
+# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
+#define MCI_DTOR 0x0008 /* Data Timeout */
+# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
+# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
+#define MCI_SDCR 0x000c /* SD Card / SDIO */
+# define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
+# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
+# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */
+# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */
+#define MCI_ARGR 0x0010 /* Command Argument */
+#define MCI_CMDR 0x0014 /* Command */
+# define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
+# define MCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */
+# define MCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */
+# define MCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */
+# define MCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */
+# define MCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */
+# define MCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */
+# define MCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */
+# define MCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */
+# define MCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */
+# define MCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */
+# define MCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */
+# define MCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */
+# define MCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */
+# define MCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */
+# define MCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */
+# define MCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */
+# define MCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */
+# define MCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */
+# define MCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */
+# define MCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */
+# define MCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */
+#define MCI_BLKR 0x0018 /* Block */
+# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */
+# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
+#define MCI_RSPR 0x0020 /* Response 0 */
+#define MCI_RSPR1 0x0024 /* Response 1 */
+#define MCI_RSPR2 0x0028 /* Response 2 */
+#define MCI_RSPR3 0x002c /* Response 3 */
+#define MCI_RDR 0x0030 /* Receive Data */
+#define MCI_TDR 0x0034 /* Transmit Data */
+#define MCI_SR 0x0040 /* Status */
+#define MCI_IER 0x0044 /* Interrupt Enable */
+#define MCI_IDR 0x0048 /* Interrupt Disable */
+#define MCI_IMR 0x004c /* Interrupt Mask */
+# define MCI_CMDRDY ( 1 << 0) /* Command Ready */
+# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */
+# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */
+# define MCI_BLKE ( 1 << 3) /* Data Block Ended */
+# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
+# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
+# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
+# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
+# define MCI_RINDE ( 1 << 16) /* Response Index Error */
+# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */
+# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */
+# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */
+# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */
+# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */
+# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
+# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
+# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
+
+/* Register access macros */
+#define mci_readl(port,reg) \
+ __raw_readl((port)->regs + MCI_##reg)
+#define mci_writel(port,reg,value) \
+ __raw_writel((value), (port)->regs + MCI_##reg)
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
new file mode 100644
index 00000000000..cce873c5a14
--- /dev/null
+++ b/drivers/mmc/host/atmel-mci.c
@@ -0,0 +1,981 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/blkdev.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/atmel-mci.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "atmel-mci-regs.h"
+
+#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
+
+enum {
+ EVENT_CMD_COMPLETE = 0,
+ EVENT_DATA_ERROR,
+ EVENT_DATA_COMPLETE,
+ EVENT_STOP_SENT,
+ EVENT_STOP_COMPLETE,
+ EVENT_XFER_COMPLETE,
+};
+
+struct atmel_mci {
+ struct mmc_host *mmc;
+ void __iomem *regs;
+
+ struct scatterlist *sg;
+ unsigned int pio_offset;
+
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ u32 cmd_status;
+ u32 data_status;
+ u32 stop_status;
+ u32 stop_cmdr;
+
+ u32 mode_reg;
+ u32 sdc_reg;
+
+ struct tasklet_struct tasklet;
+ unsigned long pending_events;
+ unsigned long completed_events;
+
+ int present;
+ int detect_pin;
+ int wp_pin;
+
+ /* For detect pin debouncing */
+ struct timer_list detect_timer;
+
+ unsigned long bus_hz;
+ unsigned long mapbase;
+ struct clk *mck;
+ struct platform_device *pdev;
+};
+
+#define atmci_is_completed(host, event) \
+ test_bit(event, &host->completed_events)
+#define atmci_test_and_clear_pending(host, event) \
+ test_and_clear_bit(event, &host->pending_events)
+#define atmci_test_and_set_completed(host, event) \
+ test_and_set_bit(event, &host->completed_events)
+#define atmci_set_completed(host, event) \
+ set_bit(event, &host->completed_events)
+#define atmci_set_pending(host, event) \
+ set_bit(event, &host->pending_events)
+#define atmci_clear_pending(host, event) \
+ clear_bit(event, &host->pending_events)
+
+
+static void atmci_enable(struct atmel_mci *host)
+{
+ clk_enable(host->mck);
+ mci_writel(host, CR, MCI_CR_MCIEN);
+ mci_writel(host, MR, host->mode_reg);
+ mci_writel(host, SDCR, host->sdc_reg);
+}
+
+static void atmci_disable(struct atmel_mci *host)
+{
+ mci_writel(host, CR, MCI_CR_SWRST);
+
+ /* Stall until write is complete, then disable the bus clock */
+ mci_readl(host, SR);
+ clk_disable(host->mck);
+}
+
+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+ unsigned int ns)
+{
+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
+}
+
+static void atmci_set_timeout(struct atmel_mci *host,
+ struct mmc_data *data)
+{
+ static unsigned dtomul_to_shift[] = {
+ 0, 4, 7, 8, 10, 12, 16, 20
+ };
+ unsigned timeout;
+ unsigned dtocyc;
+ unsigned dtomul;
+
+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+
+ for (dtomul = 0; dtomul < 8; dtomul++) {
+ unsigned shift = dtomul_to_shift[dtomul];
+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
+ if (dtocyc < 15)
+ break;
+ }
+
+ if (dtomul >= 8) {
+ dtomul = 7;
+ dtocyc = 15;
+ }
+
+ dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
+ dtocyc << dtomul_to_shift[dtomul]);
+ mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
+}
+
+/*
+ * Return mask with command flags to be enabled for this command.
+ */
+static u32 atmci_prepare_command(struct mmc_host *mmc,
+ struct mmc_command *cmd)
+{
+ struct mmc_data *data;
+ u32 cmdr;
+
+ cmd->error = -EINPROGRESS;
+
+ cmdr = MCI_CMDR_CMDNB(cmd->opcode);
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136)
+ cmdr |= MCI_CMDR_RSPTYP_136BIT;
+ else
+ cmdr |= MCI_CMDR_RSPTYP_48BIT;
+ }
+
+ /*
+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
+ * it's too difficult to determine whether this is an ACMD or
+ * not. Better make it 64.
+ */
+ cmdr |= MCI_CMDR_MAXLAT_64CYC;
+
+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
+ cmdr |= MCI_CMDR_OPDCMD;
+
+ data = cmd->data;
+ if (data) {
+ cmdr |= MCI_CMDR_START_XFER;
+ if (data->flags & MMC_DATA_STREAM)
+ cmdr |= MCI_CMDR_STREAM;
+ else if (data->blocks > 1)
+ cmdr |= MCI_CMDR_MULTI_BLOCK;
+ else
+ cmdr |= MCI_CMDR_BLOCK;
+
+ if (data->flags & MMC_DATA_READ)
+ cmdr |= MCI_CMDR_TRDIR_READ;
+ }
+
+ return cmdr;
+}
+
+static void atmci_start_command(struct atmel_mci *host,
+ struct mmc_command *cmd,
+ u32 cmd_flags)
+{
+ /* Must read host->cmd after testing event flags */
+ smp_rmb();
+ WARN_ON(host->cmd);
+ host->cmd = cmd;
+
+ dev_vdbg(&host->mmc->class_dev,
+ "start command: ARGR=0x%08x CMDR=0x%08x\n",
+ cmd->arg, cmd_flags);
+
+ mci_writel(host, ARGR, cmd->arg);
+ mci_writel(host, CMDR, cmd_flags);
+}
+
+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data)
+{
+ struct atmel_mci *host = mmc_priv(mmc);
+
+ atmci_start_command(host, data->stop, host->stop_cmdr);
+ mci_writel(host, IER, MCI_CMDRDY);
+}
+
+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct atmel_mci *host = mmc_priv(mmc);
+
+ WARN_ON(host->cmd || host->data);
+ host->mrq = NULL;
+
+ atmci_disable(host);
+
+ mmc_request_done(mmc, mrq);
+}
+
+/*
+ * Returns a mask of interrupt flags to be enabled after the whole
+ * request has been prepared.
+ */
+static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
+{
+ struct atmel_mci *host = mmc_priv(mmc);
+ u32 iflags;
+
+ data->error = -EINPROGRESS;
+
+ WARN_ON(host->data);
+ host->sg = NULL;
+ host->data = data;
+
+ mci_writel(host, BLKR, MCI_BCNT(data->blocks)
+ | MCI_BLKLEN(data->blksz));
+ dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
+ MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
+
+ iflags = ATMCI_DATA_ERROR_FLAGS;
+ host->sg = data->sg;
+ host->pio_offset = 0;
+ if (data->flags & MMC_DATA_READ)
+ iflags |= MCI_RXRDY;
+ else
+ iflags |= MCI_TXRDY;
+
+ return iflags;
+}
+
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct atmel_mci *host = mmc_priv(mmc);
+ struct mmc_data *data;
+ struct mmc_command *cmd;
+ u32 iflags;
+ u32 cmdflags = 0;
+
+ iflags = mci_readl(host, IMR);
+ if (iflags)
+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
+ mci_readl(host, IMR));
+
+ WARN_ON(host->mrq != NULL);
+
+ /*
+ * We may "know" the card is gone even though there's still an
+ * electrical connection. If so, we really need to communicate
+ * this to the MMC core since there won't be any more
+ * interrupts as the card is completely removed. Otherwise,
+ * the MMC core might believe the card is still there even
+ * though the card was just removed very slowly.
+ */
+ if (!host->present) {
+ mrq->cmd->error = -ENOMEDIUM;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ host->mrq = mrq;
+ host->pending_events = 0;
+ host->completed_events = 0;
+
+ atmci_enable(host);
+
+ /* We don't support multiple blocks of weird lengths. */
+ data = mrq->data;
+ if (data) {
+ if (data->blocks > 1 && data->blksz & 3)
+ goto fail;
+ atmci_set_timeout(host, data);
+ }
+
+ iflags = MCI_CMDRDY;
+ cmd = mrq->cmd;
+ cmdflags = atmci_prepare_command(mmc, cmd);
+ atmci_start_command(host, cmd, cmdflags);
+
+ if (data)
+ iflags |= atmci_submit_data(mmc, data);
+
+ if (mrq->stop) {
+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
+ host->stop_cmdr |= MCI_CMDR_STOP_XFER;
+ if (!(data->flags & MMC_DATA_WRITE))
+ host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
+ if (data->flags & MMC_DATA_STREAM)
+ host->stop_cmdr |= MCI_CMDR_STREAM;
+ else
+ host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK;
+ }
+
+ /*
+ * We could have enabled interrupts earlier, but I suspect
+ * that would open up a nice can of interesting race
+ * conditions (e.g. command and data complete, but stop not
+ * prepared yet.)
+ */
+ mci_writel(host, IER, iflags);
+
+ return;
+
+fail:
+ atmci_disable(host);
+ host->mrq = NULL;
+ mrq->cmd->error = -EINVAL;
+ mmc_request_done(mmc, mrq);
+}
+
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct atmel_mci *host = mmc_priv(mmc);
+
+ if (ios->clock) {
+ u32 clkdiv;
+
+ /* Set clock rate */
+ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
+ if (clkdiv > 255) {
+ dev_warn(&mmc->class_dev,
+ "clock %u too slow; using %lu\n",
+ ios->clock, host->bus_hz / (2 * 256));
+ clkdiv = 255;
+ }
+
+ host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
+ | MCI_MR_RDPROOF;
+ }
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ host->sdc_reg = 0;
+ break;
+ case MMC_BUS_WIDTH_4:
+ host->sdc_reg = MCI_SDCBUS_4BIT;
+ break;
+ }
+
+ switch (ios->power_mode) {
+ case MMC_POWER_ON:
+ /* Send init sequence (74 clock cycles) */
+ atmci_enable(host);
+ mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
+ while (!(mci_readl(host, SR) & MCI_CMDRDY))
+ cpu_relax();
+ atmci_disable(host);
+ break;
+ default:
+ /*
+ * TODO: None of the currently available AVR32-based
+ * boards allow MMC power to be turned off. Implement
+ * power control when this can be tested properly.
+ */
+ break;
+ }
+}
+
+static int atmci_get_ro(struct mmc_host *mmc)
+{
+ int read_only = 0;
+ struct atmel_mci *host = mmc_priv(mmc);
+
+ if (host->wp_pin >= 0) {
+ read_only = gpio_get_value(host->wp_pin);
+ dev_dbg(&mmc->class_dev, "card is %s\n",
+ read_only ? "read-only" : "read-write");
+ } else {
+ dev_dbg(&mmc->class_dev,
+ "no pin for checking read-only switch."
+ " Assuming write-enable.\n");
+ }
+
+ return read_only;
+}
+
+static struct mmc_host_ops atmci_ops = {
+ .request = atmci_request,
+ .set_ios = atmci_set_ios,
+ .get_ro = atmci_get_ro,
+};
+
+static void atmci_command_complete(struct atmel_mci *host,
+ struct mmc_command *cmd, u32 status)
+{
+ /* Read the response from the card (up to 16 bytes) */
+ cmd->resp[0] = mci_readl(host, RSPR);
+ cmd->resp[1] = mci_readl(host, RSPR);
+ cmd->resp[2] = mci_readl(host, RSPR);
+ cmd->resp[3] = mci_readl(host, RSPR);
+
+ if (status & MCI_RTOE)
+ cmd->error = -ETIMEDOUT;
+ else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE))
+ cmd->error = -EILSEQ;
+ else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE))
+ cmd->error = -EIO;
+ else
+ cmd->error = 0;
+
+ if (cmd->error) {
+ dev_dbg(&host->mmc->class_dev,
+ "command error: status=0x%08x\n", status);
+
+ if (cmd->data) {
+ host->data = NULL;
+ mci_writel(host, IDR, MCI_NOTBUSY
+ | MCI_TXRDY | MCI_RXRDY
+ | ATMCI_DATA_ERROR_FLAGS);
+ }
+ }
+}
+
+static void atmci_detect_change(unsigned long data)
+{
+ struct atmel_mci *host = (struct atmel_mci *)data;
+ struct mmc_request *mrq = host->mrq;
+ int present;
+
+ /*
+ * atmci_remove() sets detect_pin to -1 before freeing the
+ * interrupt. We must not re-enable the interrupt if it has
+ * been freed.
+ */
+ smp_rmb();
+ if (host->detect_pin < 0)
+ return;
+
+ enable_irq(gpio_to_irq(host->detect_pin));
+ present = !gpio_get_value(host->detect_pin);
+
+ dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
+ present, host->present);
+
+ if (present != host->present) {
+ dev_dbg(&host->mmc->class_dev, "card %s\n",
+ present ? "inserted" : "removed");
+ host->present = present;
+
+ /* Reset controller if card is gone */
+ if (!present) {
+ mci_writel(host, CR, MCI_CR_SWRST);
+ mci_writel(host, IDR, ~0UL);
+ mci_writel(host, CR, MCI_CR_MCIEN);
+ }
+
+ /* Clean up queue if present */
+ if (mrq) {
+ /*
+ * Reset controller to terminate any ongoing
+ * commands or data transfers.
+ */
+ mci_writel(host, CR, MCI_CR_SWRST);
+
+ if (!atmci_is_completed(host, EVENT_CMD_COMPLETE))
+ mrq->cmd->error = -ENOMEDIUM;
+
+ if (mrq->data && !atmci_is_completed(host,
+ EVENT_DATA_COMPLETE)) {
+ host->data = NULL;
+ mrq->data->error = -ENOMEDIUM;
+ }
+ if (mrq->stop && !atmci_is_completed(host,
+ EVENT_STOP_COMPLETE))
+ mrq->stop->error = -ENOMEDIUM;
+
+ host->cmd = NULL;
+ atmci_request_end(host->mmc, mrq);
+ }
+
+ mmc_detect_change(host->mmc, 0);
+ }
+}
+
+static void atmci_tasklet_func(unsigned long priv)
+{
+ struct mmc_host *mmc = (struct mmc_host *)priv;
+ struct atmel_mci *host = mmc_priv(mmc);
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_data *data = host->data;
+
+ dev_vdbg(&mmc->class_dev,
+ "tasklet: pending/completed/mask %lx/%lx/%x\n",
+ host->pending_events, host->completed_events,
+ mci_readl(host, IMR));
+
+ if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) {
+ /*
+ * host->cmd must be set to NULL before the interrupt
+ * handler sees EVENT_CMD_COMPLETE
+ */
+ host->cmd = NULL;
+ smp_wmb();
+ atmci_set_completed(host, EVENT_CMD_COMPLETE);
+ atmci_command_complete(host, mrq->cmd, host->cmd_status);
+
+ if (!mrq->cmd->error && mrq->stop
+ && atmci_is_completed(host, EVENT_XFER_COMPLETE)
+ && !atmci_test_and_set_completed(host,
+ EVENT_STOP_SENT))
+ send_stop_cmd(host->mmc, mrq->data);
+ }
+ if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) {
+ /*
+ * host->cmd must be set to NULL before the interrupt
+ * handler sees EVENT_STOP_COMPLETE
+ */
+ host->cmd = NULL;
+ smp_wmb();
+ atmci_set_completed(host, EVENT_STOP_COMPLETE);
+ atmci_command_complete(host, mrq->stop, host->stop_status);
+ }
+ if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) {
+ u32 status = host->data_status;
+
+ dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status);
+
+ atmci_set_completed(host, EVENT_DATA_ERROR);
+ atmci_set_completed(host, EVENT_DATA_COMPLETE);
+
+ if (status & MCI_DTOE) {
+ dev_dbg(&mmc->class_dev,
+ "data timeout error\n");
+ data->error = -ETIMEDOUT;
+ } else if (status & MCI_DCRCE) {
+ dev_dbg(&mmc->class_dev, "data CRC error\n");
+ data->error = -EILSEQ;
+ } else {
+ dev_dbg(&mmc->class_dev,
+ "data FIFO error (status=%08x)\n",
+ status);
+ data->error = -EIO;
+ }
+
+ if (host->present && data->stop
+ && atmci_is_completed(host, EVENT_CMD_COMPLETE)
+ && !atmci_test_and_set_completed(
+ host, EVENT_STOP_SENT))
+ send_stop_cmd(host->mmc, data);
+
+ host->data = NULL;
+ }
+ if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) {
+ atmci_set_completed(host, EVENT_DATA_COMPLETE);
+
+ if (!atmci_is_completed(host, EVENT_DATA_ERROR)) {
+ data->bytes_xfered = data->blocks * data->blksz;
+ data->error = 0;
+ }
+
+ host->data = NULL;
+ }
+
+ if (host->mrq && !host->cmd && !host->data)
+ atmci_request_end(mmc, host->mrq);
+}
+
+static void atmci_read_data_pio(struct atmel_mci *host)
+{
+ struct scatterlist *sg = host->sg;
+ void *buf = sg_virt(sg);
+ unsigned int offset = host->pio_offset;
+ struct mmc_data *data = host->data;
+ u32 value;
+ u32 status;
+ unsigned int nbytes = 0;
+
+ do {
+ value = mci_readl(host, RDR);
+ if (likely(offset + 4 <= sg->length)) {
+ put_unaligned(value, (u32 *)(buf + offset));
+
+ offset += 4;
+ nbytes += 4;
+
+ if (offset == sg->length) {
+ host->sg = sg = sg_next(sg);
+ if (!sg)
+ goto done;
+
+ offset = 0;
+ buf = sg_virt(sg);
+ }
+ } else {
+ unsigned int remaining = sg->length - offset;
+ memcpy(buf + offset, &value, remaining);
+ nbytes += remaining;
+
+ flush_dcache_page(sg_page(sg));
+ host->sg = sg = sg_next(sg);
+ if (!sg)
+ goto done;
+
+ offset = 4 - remaining;
+ buf = sg_virt(sg);
+ memcpy(buf, (u8 *)&value + remaining, offset);
+ nbytes += offset;
+ }
+
+ status = mci_readl(host, SR);
+ if (status & ATMCI_DATA_ERROR_FLAGS) {
+ mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
+ | ATMCI_DATA_ERROR_FLAGS));
+ host->data_status = status;
+ atmci_set_pending(host, EVENT_DATA_ERROR);
+ tasklet_schedule(&host->tasklet);
+ break;
+ }
+ } while (status & MCI_RXRDY);
+
+ host->pio_offset = offset;
+ data->bytes_xfered += nbytes;
+
+ return;
+
+done:
+ mci_writel(host, IDR, MCI_RXRDY);
+ mci_writel(host, IER, MCI_NOTBUSY);
+ data->bytes_xfered += nbytes;
+ atmci_set_completed(host, EVENT_XFER_COMPLETE);
+ if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
+ && !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
+ send_stop_cmd(host->mmc, data);
+}
+
+static void atmci_write_data_pio(struct atmel_mci *host)
+{
+ struct scatterlist *sg = host->sg;
+ void *buf = sg_virt(sg);
+ unsigned int offset = host->pio_offset;
+ struct mmc_data *data = host->data;
+ u32 value;
+ u32 status;
+ unsigned int nbytes = 0;
+
+ do {
+ if (likely(offset + 4 <= sg->length)) {
+ value = get_unaligned((u32 *)(buf + offset));
+ mci_writel(host, TDR, value);
+
+ offset += 4;
+ nbytes += 4;
+ if (offset == sg->length) {
+ host->sg = sg = sg_next(sg);
+ if (!sg)
+ goto done;
+
+ offset = 0;
+ buf = sg_virt(sg);
+ }
+ } else {
+ unsigned int remaining = sg->length - offset;
+
+ value = 0;
+ memcpy(&value, buf + offset, remaining);
+ nbytes += remaining;
+
+ host->sg = sg = sg_next(sg);
+ if (!sg) {
+ mci_writel(host, TDR, value);
+ goto done;
+ }
+
+ offset = 4 - remaining;
+ buf = sg_virt(sg);
+ memcpy((u8 *)&value + remaining, buf, offset);
+ mci_writel(host, TDR, value);
+ nbytes += offset;
+ }
+
+ status = mci_readl(host, SR);
+ if (status & ATMCI_DATA_ERROR_FLAGS) {
+ mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
+ | ATMCI_DATA_ERROR_FLAGS));
+ host->data_status = status;
+ atmci_set_pending(host, EVENT_DATA_ERROR);
+ tasklet_schedule(&host->tasklet);
+ break;
+ }
+ } while (status & MCI_TXRDY);
+
+ host->pio_offset = offset;
+ data->bytes_xfered += nbytes;
+
+ return;
+
+done:
+ mci_writel(host, IDR, MCI_TXRDY);
+ mci_writel(host, IER, MCI_NOTBUSY);
+ data->bytes_xfered += nbytes;
+ atmci_set_completed(host, EVENT_XFER_COMPLETE);
+ if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
+ && !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
+ send_stop_cmd(host->mmc, data);
+}
+
+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
+{
+ struct atmel_mci *host = mmc_priv(mmc);
+
+ mci_writel(host, IDR, MCI_CMDRDY);
+
+ if (atmci_is_completed(host, EVENT_STOP_SENT)) {
+ host->stop_status = status;
+ atmci_set_pending(host, EVENT_STOP_COMPLETE);
+ } else {
+ host->cmd_status = status;
+ atmci_set_pending(host, EVENT_CMD_COMPLETE);
+ }
+
+ tasklet_schedule(&host->tasklet);
+}
+
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+{
+ struct mmc_host *mmc = dev_id;
+ struct atmel_mci *host = mmc_priv(mmc);
+ u32 status, mask, pending;
+ unsigned int pass_count = 0;
+
+ spin_lock(&mmc->lock);
+
+ do {
+ status = mci_readl(host, SR);
+ mask = mci_readl(host, IMR);
+ pending = status & mask;
+ if (!pending)
+ break;
+
+ if (pending & ATMCI_DATA_ERROR_FLAGS) {
+ mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
+ | MCI_RXRDY | MCI_TXRDY);
+ pending &= mci_readl(host, IMR);
+ host->data_status = status;
+ atmci_set_pending(host, EVENT_DATA_ERROR);
+ tasklet_schedule(&host->tasklet);
+ }
+ if (pending & MCI_NOTBUSY) {
+ mci_writel(host, IDR, (MCI_NOTBUSY
+ | ATMCI_DATA_ERROR_FLAGS));
+ atmci_set_pending(host, EVENT_DATA_COMPLETE);
+ tasklet_schedule(&host->tasklet);
+ }
+ if (pending & MCI_RXRDY)
+ atmci_read_data_pio(host);
+ if (pending & MCI_TXRDY)
+ atmci_write_data_pio(host);
+
+ if (pending & MCI_CMDRDY)
+ atmci_cmd_interrupt(mmc, status);
+ } while (pass_count++ < 5);
+
+ spin_unlock(&mmc->lock);
+
+ return pass_count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+{
+ struct mmc_host *mmc = dev_id;
+ struct atmel_mci *host = mmc_priv(mmc);
+
+ /*
+ * Disable interrupts until the pin has stabilized and check
+ * the state then. Use mod_timer() since we may be in the
+ * middle of the timer routine when this interrupt triggers.
+ */
+ disable_irq_nosync(irq);
+ mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
+
+ return IRQ_HANDLED;
+}
+
+static int __init atmci_probe(struct platform_device *pdev)
+{
+ struct mci_platform_data *pdata;
+ struct atmel_mci *host;
+ struct mmc_host *mmc;
+ struct resource *regs;
+ int irq;
+ int ret;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ return -ENXIO;
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -ENXIO;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ host = mmc_priv(mmc);
+ host->pdev = pdev;
+ host->mmc = mmc;
+ host->detect_pin = pdata->detect_pin;
+ host->wp_pin = pdata->wp_pin;
+
+ host->mck = clk_get(&pdev->dev, "mci_clk");
+ if (IS_ERR(host->mck)) {
+ ret = PTR_ERR(host->mck);
+ goto err_clk_get;
+ }
+
+ ret = -ENOMEM;
+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ if (!host->regs)
+ goto err_ioremap;
+
+ clk_enable(host->mck);
+ mci_writel(host, CR, MCI_CR_SWRST);
+ host->bus_hz = clk_get_rate(host->mck);
+ clk_disable(host->mck);
+
+ host->mapbase = regs->start;
+
+ mmc->ops = &atmci_ops;
+ mmc->f_min = (host->bus_hz + 511) / 512;
+ mmc->f_max = host->bus_hz / 2;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ mmc->max_hw_segs = 64;
+ mmc->max_phys_segs = 64;
+ mmc->max_req_size = 32768 * 512;
+ mmc->max_blk_size = 32768;
+ mmc->max_blk_count = 512;
+
+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
+
+ ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc);
+ if (ret)
+ goto err_request_irq;
+
+ /* Assume card is present if we don't have a detect pin */
+ host->present = 1;
+ if (host->detect_pin >= 0) {
+ if (gpio_request(host->detect_pin, "mmc_detect")) {
+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
+ host->detect_pin = -1;
+ } else {
+ host->present = !gpio_get_value(host->detect_pin);
+ }
+ }
+ if (host->wp_pin >= 0) {
+ if (gpio_request(host->wp_pin, "mmc_wp")) {
+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
+ host->wp_pin = -1;
+ }
+ }
+
+ platform_set_drvdata(pdev, host);
+
+ mmc_add_host(mmc);
+
+ if (host->detect_pin >= 0) {
+ setup_timer(&host->detect_timer, atmci_detect_change,
+ (unsigned long)host);
+
+ ret = request_irq(gpio_to_irq(host->detect_pin),
+ atmci_detect_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-detect", mmc);
+ if (ret) {
+ dev_dbg(&mmc->class_dev,
+ "could not request IRQ %d for detect pin\n",
+ gpio_to_irq(host->detect_pin));
+ gpio_free(host->detect_pin);
+ host->detect_pin = -1;
+ }
+ }
+
+ dev_info(&mmc->class_dev,
+ "Atmel MCI controller at 0x%08lx irq %d\n",
+ host->mapbase, irq);
+
+ return 0;
+
+err_request_irq:
+ iounmap(host->regs);
+err_ioremap:
+ clk_put(host->mck);
+err_clk_get:
+ mmc_free_host(mmc);
+ return ret;
+}
+
+static int __exit atmci_remove(struct platform_device *pdev)
+{
+ struct atmel_mci *host = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (host) {
+ if (host->detect_pin >= 0) {
+ int pin = host->detect_pin;
+
+ /* Make sure the timer doesn't enable the interrupt */
+ host->detect_pin = -1;
+ smp_wmb();
+
+ free_irq(gpio_to_irq(pin), host->mmc);
+ del_timer_sync(&host->detect_timer);
+ gpio_free(pin);
+ }
+
+ mmc_remove_host(host->mmc);
+
+ clk_enable(host->mck);
+ mci_writel(host, IDR, ~0UL);
+ mci_writel(host, CR, MCI_CR_MCIDIS);
+ mci_readl(host, SR);
+ clk_disable(host->mck);
+
+ if (host->wp_pin >= 0)
+ gpio_free(host->wp_pin);
+
+ free_irq(platform_get_irq(pdev, 0), host->mmc);
+ iounmap(host->regs);
+
+ clk_put(host->mck);
+
+ mmc_free_host(host->mmc);
+ }
+ return 0;
+}
+
+static struct platform_driver atmci_driver = {
+ .remove = __exit_p(atmci_remove),
+ .driver = {
+ .name = "atmel_mci",
+ },
+};
+
+static int __init atmci_init(void)
+{
+ return platform_driver_probe(&atmci_driver, atmci_probe);
+}
+
+static void __exit atmci_exit(void)
+{
+ platform_driver_unregister(&atmci_driver);
+}
+
+module_init(atmci_init);
+module_exit(atmci_exit);
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index cc5f7bc546a..3f15eb20489 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -21,7 +21,7 @@
* published by the Free Software Foundation.
*/
-/* Why is a timer used to detect insert events?
+/* Why don't we use the SD controllers' carddetect feature?
*
* From the AU1100 MMC application guide:
* If the Au1100-based design is intended to support both MultiMediaCards
@@ -30,8 +30,6 @@
* In doing so, a MMC card never enters SPI-mode communications,
* but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
* (the low to high transition will not occur).
- *
- * So we use the timer to check the status manually.
*/
#include <linux/module.h>
@@ -41,51 +39,110 @@
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
-
+#include <linux/leds.h>
#include <linux/mmc/host.h>
+
#include <asm/io.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
-#include <au1xxx.h>
-#include "au1xmmc.h"
-
#define DRIVER_NAME "au1xxx-mmc"
/* Set this to enable special debugging macros */
+/* #define DEBUG */
#ifdef DEBUG
-#define DBG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args)
+#define DBG(fmt, idx, args...) \
+ printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args)
#else
-#define DBG(fmt, idx, args...)
+#define DBG(fmt, idx, args...) do {} while (0)
#endif
-const struct {
+/* Hardware definitions */
+#define AU1XMMC_DESCRIPTOR_COUNT 1
+#define AU1XMMC_DESCRIPTOR_SIZE 2048
+
+#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
+ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
+
+/* This gives us a hard value for the stop command that we can write directly
+ * to the command register.
+ */
+#define STOP_CMD \
+ (SD_CMD_RT_1B | SD_CMD_CT_7 | (0xC << SD_CMD_CI_SHIFT) | SD_CMD_GO)
+
+/* This is the set of interrupts that we configure by default. */
+#define AU1XMMC_INTERRUPTS \
+ (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_RAT | \
+ SD_CONFIG_CR | SD_CONFIG_I)
+
+/* The poll event (looking for insert/remove events runs twice a second. */
+#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
+
+struct au1xmmc_host {
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+
+ u32 flags;
u32 iobase;
- u32 tx_devid, rx_devid;
- u16 bcsrpwr;
- u16 bcsrstatus;
- u16 wpstatus;
-} au1xmmc_card_table[] = {
- { SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0,
- BCSR_BOARD_SD0PWR, BCSR_INT_SD0INSERT, BCSR_STATUS_SD0WP },
-#ifndef CONFIG_MIPS_DB1200
- { SD1_BASE, DSCR_CMD0_SDMS_TX1, DSCR_CMD0_SDMS_RX1,
- BCSR_BOARD_DS1PWR, BCSR_INT_SD1INSERT, BCSR_STATUS_SD1WP }
-#endif
-};
+ u32 clock;
+ u32 bus_width;
+ u32 power_mode;
-#define AU1XMMC_CONTROLLER_COUNT (ARRAY_SIZE(au1xmmc_card_table))
+ int status;
-/* This array stores pointers for the hosts (used by the IRQ handler) */
-struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT];
-static int dma = 1;
+ struct {
+ int len;
+ int dir;
+ } dma;
-#ifdef MODULE
-module_param(dma, bool, 0);
-MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)");
-#endif
+ struct {
+ int index;
+ int offset;
+ int len;
+ } pio;
+
+ u32 tx_chan;
+ u32 rx_chan;
+
+ int irq;
+
+ struct tasklet_struct finish_task;
+ struct tasklet_struct data_task;
+ struct au1xmmc_platform_data *platdata;
+ struct platform_device *pdev;
+ struct resource *ioarea;
+};
+
+/* Status flags used by the host structure */
+#define HOST_F_XMIT 0x0001
+#define HOST_F_RECV 0x0002
+#define HOST_F_DMA 0x0010
+#define HOST_F_ACTIVE 0x0100
+#define HOST_F_STOP 0x1000
+
+#define HOST_S_IDLE 0x0001
+#define HOST_S_CMD 0x0002
+#define HOST_S_DATA 0x0003
+#define HOST_S_STOP 0x0004
+
+/* Easy access macros */
+#define HOST_STATUS(h) ((h)->iobase + SD_STATUS)
+#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG)
+#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE)
+#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT)
+#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT)
+#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG)
+#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE)
+#define HOST_CMD(h) ((h)->iobase + SD_CMD)
+#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2)
+#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT)
+#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG)
+
+#define DMA_CHANNEL(h) \
+ (((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
{
@@ -119,14 +176,13 @@ static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
static inline void SEND_STOP(struct au1xmmc_host *host)
{
-
- /* We know the value of CONFIG2, so avoid a read we don't need */
- u32 mask = SD_CONFIG2_EN;
+ u32 config2;
WARN_ON(host->status != HOST_S_DATA);
host->status = HOST_S_STOP;
- au_writel(mask | SD_CONFIG2_DF, HOST_CONFIG2(host));
+ config2 = au_readl(HOST_CONFIG2(host));
+ au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host));
au_sync();
/* Send the stop commmand */
@@ -135,35 +191,36 @@ static inline void SEND_STOP(struct au1xmmc_host *host)
static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
{
-
- u32 val = au1xmmc_card_table[host->id].bcsrpwr;
-
- bcsr->board &= ~val;
- if (state) bcsr->board |= val;
-
- au_sync_delay(1);
+ if (host->platdata && host->platdata->set_power)
+ host->platdata->set_power(host->mmc, state);
}
-static inline int au1xmmc_card_inserted(struct au1xmmc_host *host)
+static int au1xmmc_card_inserted(struct mmc_host *mmc)
{
- return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus)
- ? 1 : 0;
+ struct au1xmmc_host *host = mmc_priv(mmc);
+
+ if (host->platdata && host->platdata->card_inserted)
+ return !!host->platdata->card_inserted(host->mmc);
+
+ return -ENOSYS;
}
static int au1xmmc_card_readonly(struct mmc_host *mmc)
{
struct au1xmmc_host *host = mmc_priv(mmc);
- return (bcsr->status & au1xmmc_card_table[host->id].wpstatus)
- ? 1 : 0;
+
+ if (host->platdata && host->platdata->card_readonly)
+ return !!host->platdata->card_readonly(mmc);
+
+ return -ENOSYS;
}
static void au1xmmc_finish_request(struct au1xmmc_host *host)
{
-
struct mmc_request *mrq = host->mrq;
host->mrq = NULL;
- host->flags &= HOST_F_ACTIVE;
+ host->flags &= HOST_F_ACTIVE | HOST_F_DMA;
host->dma.len = 0;
host->dma.dir = 0;
@@ -174,8 +231,6 @@ static void au1xmmc_finish_request(struct au1xmmc_host *host)
host->status = HOST_S_IDLE;
- bcsr->disk_leds |= (1 << 8);
-
mmc_request_done(host->mmc, mrq);
}
@@ -235,18 +290,14 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
au_sync();
/* Wait for the command to go on the line */
-
- while(1) {
- if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO))
- break;
- }
+ while (au_readl(HOST_CMD(host)) & SD_CMD_GO)
+ /* nop */;
/* Wait for the command to come back */
-
if (wait) {
u32 status = au_readl(HOST_STATUS(host));
- while(!(status & SD_STATUS_CR))
+ while (!(status & SD_STATUS_CR))
status = au_readl(HOST_STATUS(host));
/* Clear the CR status */
@@ -260,12 +311,11 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
{
-
struct mmc_request *mrq = host->mrq;
struct mmc_data *data;
u32 crc;
- WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP);
+ WARN_ON((host->status != HOST_S_DATA) && (host->status != HOST_S_STOP));
if (host->mrq == NULL)
return;
@@ -276,15 +326,13 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
status = au_readl(HOST_STATUS(host));
/* The transaction is really over when the SD_STATUS_DB bit is clear */
-
- while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
+ while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
status = au_readl(HOST_STATUS(host));
data->error = 0;
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
/* Process any errors */
-
crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
if (host->flags & HOST_F_XMIT)
crc |= ((status & 0x07) == 0x02) ? 0 : 1;
@@ -299,16 +347,16 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
if (!data->error) {
if (host->flags & HOST_F_DMA) {
+#ifdef CONFIG_SOC_AU1200 /* DBDMA */
u32 chan = DMA_CHANNEL(host);
- chan_tab_t *c = *((chan_tab_t **) chan);
+ chan_tab_t *c = *((chan_tab_t **)chan);
au1x_dma_chan_t *cp = c->chan_ptr;
data->bytes_xfered = cp->ddma_bytecnt;
- }
- else
+#endif
+ } else
data->bytes_xfered =
- (data->blocks * data->blksz) -
- host->pio.len;
+ (data->blocks * data->blksz) - host->pio.len;
}
au1xmmc_finish_request(host);
@@ -316,7 +364,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
static void au1xmmc_tasklet_data(unsigned long param)
{
- struct au1xmmc_host *host = (struct au1xmmc_host *) param;
+ struct au1xmmc_host *host = (struct au1xmmc_host *)param;
u32 status = au_readl(HOST_STATUS(host));
au1xmmc_data_complete(host, status);
@@ -326,11 +374,10 @@ static void au1xmmc_tasklet_data(unsigned long param)
static void au1xmmc_send_pio(struct au1xmmc_host *host)
{
-
- struct mmc_data *data = 0;
- int sg_len, max, count = 0;
- unsigned char *sg_ptr;
- u32 status = 0;
+ struct mmc_data *data;
+ int sg_len, max, count;
+ unsigned char *sg_ptr, val;
+ u32 status;
struct scatterlist *sg;
data = host->mrq->data;
@@ -345,14 +392,12 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
/* This is the space left inside the buffer */
sg_len = data->sg[host->pio.index].length - host->pio.offset;
- /* Check to if we need less then the size of the sg_buffer */
-
+ /* Check if we need less than the size of the sg_buffer */
max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
- if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER;
-
- for(count = 0; count < max; count++ ) {
- unsigned char val;
+ if (max > AU1XMMC_MAX_TRANSFER)
+ max = AU1XMMC_MAX_TRANSFER;
+ for (count = 0; count < max; count++) {
status = au_readl(HOST_STATUS(host));
if (!(status & SD_STATUS_TH))
@@ -360,7 +405,7 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
val = *sg_ptr++;
- au_writel((unsigned long) val, HOST_TXPORT(host));
+ au_writel((unsigned long)val, HOST_TXPORT(host));
au_sync();
}
@@ -384,11 +429,10 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
static void au1xmmc_receive_pio(struct au1xmmc_host *host)
{
-
- struct mmc_data *data = 0;
- int sg_len = 0, max = 0, count = 0;
- unsigned char *sg_ptr = 0;
- u32 status = 0;
+ struct mmc_data *data;
+ int max, count, sg_len = 0;
+ unsigned char *sg_ptr = NULL;
+ u32 status, val;
struct scatterlist *sg;
data = host->mrq->data;
@@ -405,33 +449,33 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
/* This is the space left inside the buffer */
sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
- /* Check to if we need less then the size of the sg_buffer */
- if (sg_len < max) max = sg_len;
+ /* Check if we need less than the size of the sg_buffer */
+ if (sg_len < max)
+ max = sg_len;
}
if (max > AU1XMMC_MAX_TRANSFER)
max = AU1XMMC_MAX_TRANSFER;
- for(count = 0; count < max; count++ ) {
- u32 val;
+ for (count = 0; count < max; count++) {
status = au_readl(HOST_STATUS(host));
if (!(status & SD_STATUS_NE))
break;
if (status & SD_STATUS_RC) {
- DBG("RX CRC Error [%d + %d].\n", host->id,
+ DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
host->pio.len, count);
break;
}
if (status & SD_STATUS_RO) {
- DBG("RX Overrun [%d + %d]\n", host->id,
+ DBG("RX Overrun [%d + %d]\n", host->pdev->id,
host->pio.len, count);
break;
}
else if (status & SD_STATUS_RU) {
- DBG("RX Underrun [%d + %d]\n", host->id,
+ DBG("RX Underrun [%d + %d]\n", host->pdev->id,
host->pio.len, count);
break;
}
@@ -439,7 +483,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
val = au_readl(HOST_RXPORT(host));
if (sg_ptr)
- *sg_ptr++ = (unsigned char) (val & 0xFF);
+ *sg_ptr++ = (unsigned char)(val & 0xFF);
}
host->pio.len -= count;
@@ -451,7 +495,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
}
if (host->pio.len == 0) {
- //IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF);
+ /* IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); */
IRQ_OFF(host, SD_CONFIG_NE);
if (host->flags & HOST_F_STOP)
@@ -461,17 +505,15 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
}
}
-/* static void au1xmmc_cmd_complete
- This is called when a command has been completed - grab the response
- and check for errors. Then start the data transfer if it is indicated.
-*/
-
+/* This is called when a command has been completed - grab the response
+ * and check for errors. Then start the data transfer if it is indicated.
+ */
static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
{
-
struct mmc_request *mrq = host->mrq;
struct mmc_command *cmd;
- int trans;
+ u32 r[4];
+ int i, trans;
if (!host->mrq)
return;
@@ -481,9 +523,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
- u32 r[4];
- int i;
-
r[0] = au_readl(host->iobase + SD_RESP3);
r[1] = au_readl(host->iobase + SD_RESP2);
r[2] = au_readl(host->iobase + SD_RESP1);
@@ -491,10 +530,9 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
/* The CRC is omitted from the response, so really
* we only got 120 bytes, but the engine expects
- * 128 bits, so we have to shift things up
+ * 128 bits, so we have to shift things up.
*/
-
- for(i = 0; i < 4; i++) {
+ for (i = 0; i < 4; i++) {
cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
if (i != 3)
cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
@@ -505,22 +543,20 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
* our response omits the CRC, our data ends up
* being shifted 8 bits to the right. In this case,
* that means that the OSR data starts at bit 31,
- * so we can just read RESP0 and return that
+ * so we can just read RESP0 and return that.
*/
cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
}
}
/* Figure out errors */
-
if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
cmd->error = -EILSEQ;
trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
if (!trans || cmd->error) {
-
- IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF);
+ IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF);
tasklet_schedule(&host->finish_task);
return;
}
@@ -528,6 +564,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
host->status = HOST_S_DATA;
if (host->flags & HOST_F_DMA) {
+#ifdef CONFIG_SOC_AU1200 /* DBDMA */
u32 channel = DMA_CHANNEL(host);
/* Start the DMA as soon as the buffer gets something in it */
@@ -540,23 +577,21 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
}
au1xxx_dbdma_start(channel);
+#endif
}
}
static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
{
-
unsigned int pbus = get_au1x00_speed();
unsigned int divisor;
u32 config;
/* From databook:
- divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
- */
-
+ * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
+ */
pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
pbus /= 2;
-
divisor = ((pbus / rate) / 2) - 1;
config = au_readl(HOST_CONFIG(host));
@@ -568,15 +603,11 @@ static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
au_sync();
}
-static int
-au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
+static int au1xmmc_prepare_data(struct au1xmmc_host *host,
+ struct mmc_data *data)
{
-
int datalen = data->blocks * data->blksz;
- if (dma != 0)
- host->flags |= HOST_F_DMA;
-
if (data->flags & MMC_DATA_READ)
host->flags |= HOST_F_RECV;
else
@@ -596,12 +627,13 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
au_writel(data->blksz - 1, HOST_BLKSIZE(host));
if (host->flags & HOST_F_DMA) {
+#ifdef CONFIG_SOC_AU1200 /* DBDMA */
int i;
u32 channel = DMA_CHANNEL(host);
au1xxx_dbdma_stop(channel);
- for(i = 0; i < host->dma.len; i++) {
+ for (i = 0; i < host->dma.len; i++) {
u32 ret = 0, flags = DDMA_FLAGS_NOIE;
struct scatterlist *sg = &data->sg[i];
int sg_len = sg->length;
@@ -611,23 +643,21 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
if (i == host->dma.len - 1)
flags = DDMA_FLAGS_IE;
- if (host->flags & HOST_F_XMIT){
- ret = au1xxx_dbdma_put_source_flags(channel,
- (void *) sg_virt(sg), len, flags);
- }
- else {
- ret = au1xxx_dbdma_put_dest_flags(channel,
- (void *) sg_virt(sg),
- len, flags);
+ if (host->flags & HOST_F_XMIT) {
+ ret = au1xxx_dbdma_put_source_flags(channel,
+ (void *)sg_virt(sg), len, flags);
+ } else {
+ ret = au1xxx_dbdma_put_dest_flags(channel,
+ (void *)sg_virt(sg), len, flags);
}
- if (!ret)
+ if (!ret)
goto dataerr;
datalen -= len;
}
- }
- else {
+#endif
+ } else {
host->pio.index = 0;
host->pio.offset = 0;
host->pio.len = datalen;
@@ -636,25 +666,21 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
IRQ_ON(host, SD_CONFIG_TH);
else
IRQ_ON(host, SD_CONFIG_NE);
- //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
+ /* IRQ_ON(host, SD_CONFIG_RA | SD_CONFIG_RF); */
}
return 0;
- dataerr:
- dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir);
+dataerr:
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ host->dma.dir);
return -ETIMEDOUT;
}
-/* static void au1xmmc_request
- This actually starts a command or data transaction
-*/
-
+/* This actually starts a command or data transaction */
static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
{
-
struct au1xmmc_host *host = mmc_priv(mmc);
- unsigned int flags = 0;
int ret = 0;
WARN_ON(irqs_disabled());
@@ -663,11 +689,15 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
host->mrq = mrq;
host->status = HOST_S_CMD;
- bcsr->disk_leds &= ~(1 << 8);
+ /* fail request immediately if no card is present */
+ if (0 == au1xmmc_card_inserted(mmc)) {
+ mrq->cmd->error = -ENOMEDIUM;
+ au1xmmc_finish_request(host);
+ return;
+ }
if (mrq->data) {
FLUSH_FIFO(host);
- flags = mrq->data->flags;
ret = au1xmmc_prepare_data(host, mrq->data);
}
@@ -682,7 +712,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
static void au1xmmc_reset_controller(struct au1xmmc_host *host)
{
-
/* Apply the clock */
au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
au_sync_delay(1);
@@ -712,9 +741,10 @@ static void au1xmmc_reset_controller(struct au1xmmc_host *host)
}
-static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
+static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct au1xmmc_host *host = mmc_priv(mmc);
+ u32 config2;
if (ios->power_mode == MMC_POWER_OFF)
au1xmmc_set_power(host, 0);
@@ -726,21 +756,18 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
au1xmmc_set_clock(host, ios->clock);
host->clock = ios->clock;
}
-}
-
-static void au1xmmc_dma_callback(int irq, void *dev_id)
-{
- struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
-
- /* Avoid spurious interrupts */
- if (!host->mrq)
- return;
-
- if (host->flags & HOST_F_STOP)
- SEND_STOP(host);
-
- tasklet_schedule(&host->data_task);
+ config2 = au_readl(HOST_CONFIG2(host));
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_4:
+ config2 |= SD_CONFIG2_WB;
+ break;
+ case MMC_BUS_WIDTH_1:
+ config2 &= ~SD_CONFIG2_WB;
+ break;
+ }
+ au_writel(config2, HOST_CONFIG2(host));
+ au_sync();
}
#define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
@@ -749,245 +776,354 @@ static void au1xmmc_dma_callback(int irq, void *dev_id)
static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
{
-
+ struct au1xmmc_host *host = dev_id;
u32 status;
- int i, ret = 0;
-
- disable_irq(AU1100_SD_IRQ);
- for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
- struct au1xmmc_host * host = au1xmmc_hosts[i];
- u32 handled = 1;
+ status = au_readl(HOST_STATUS(host));
- status = au_readl(HOST_STATUS(host));
+ if (!(status & SD_STATUS_I))
+ return IRQ_NONE; /* not ours */
- if (host->mrq && (status & STATUS_TIMEOUT)) {
- if (status & SD_STATUS_RAT)
- host->mrq->cmd->error = -ETIMEDOUT;
+ if (status & SD_STATUS_SI) /* SDIO */
+ mmc_signal_sdio_irq(host->mmc);
- else if (status & SD_STATUS_DT)
- host->mrq->data->error = -ETIMEDOUT;
+ if (host->mrq && (status & STATUS_TIMEOUT)) {
+ if (status & SD_STATUS_RAT)
+ host->mrq->cmd->error = -ETIMEDOUT;
+ else if (status & SD_STATUS_DT)
+ host->mrq->data->error = -ETIMEDOUT;
- /* In PIO mode, interrupts might still be enabled */
- IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
+ /* In PIO mode, interrupts might still be enabled */
+ IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
- //IRQ_OFF(host, SD_CONFIG_TH|SD_CONFIG_RA|SD_CONFIG_RF);
- tasklet_schedule(&host->finish_task);
- }
+ /* IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); */
+ tasklet_schedule(&host->finish_task);
+ }
#if 0
- else if (status & SD_STATUS_DD) {
-
- /* Sometimes we get a DD before a NE in PIO mode */
-
- if (!(host->flags & HOST_F_DMA) &&
- (status & SD_STATUS_NE))
- au1xmmc_receive_pio(host);
- else {
- au1xmmc_data_complete(host, status);
- //tasklet_schedule(&host->data_task);
- }
+ else if (status & SD_STATUS_DD) {
+ /* Sometimes we get a DD before a NE in PIO mode */
+ if (!(host->flags & HOST_F_DMA) && (status & SD_STATUS_NE))
+ au1xmmc_receive_pio(host);
+ else {
+ au1xmmc_data_complete(host, status);
+ /* tasklet_schedule(&host->data_task); */
}
+ }
#endif
- else if (status & (SD_STATUS_CR)) {
- if (host->status == HOST_S_CMD)
- au1xmmc_cmd_complete(host,status);
- }
- else if (!(host->flags & HOST_F_DMA)) {
- if ((host->flags & HOST_F_XMIT) &&
- (status & STATUS_DATA_OUT))
- au1xmmc_send_pio(host);
- else if ((host->flags & HOST_F_RECV) &&
- (status & STATUS_DATA_IN))
- au1xmmc_receive_pio(host);
- }
- else if (status & 0x203FBC70) {
- DBG("Unhandled status %8.8x\n", host->id, status);
- handled = 0;
- }
-
- au_writel(status, HOST_STATUS(host));
- au_sync();
-
- ret |= handled;
+ else if (status & SD_STATUS_CR) {
+ if (host->status == HOST_S_CMD)
+ au1xmmc_cmd_complete(host, status);
+
+ } else if (!(host->flags & HOST_F_DMA)) {
+ if ((host->flags & HOST_F_XMIT) && (status & STATUS_DATA_OUT))
+ au1xmmc_send_pio(host);
+ else if ((host->flags & HOST_F_RECV) && (status & STATUS_DATA_IN))
+ au1xmmc_receive_pio(host);
+
+ } else if (status & 0x203F3C70) {
+ DBG("Unhandled status %8.8x\n", host->pdev->id,
+ status);
}
- enable_irq(AU1100_SD_IRQ);
- return ret;
+ au_writel(status, HOST_STATUS(host));
+ au_sync();
+
+ return IRQ_HANDLED;
}
-static void au1xmmc_poll_event(unsigned long arg)
-{
- struct au1xmmc_host *host = (struct au1xmmc_host *) arg;
+#ifdef CONFIG_SOC_AU1200
+/* 8bit memory DMA device */
+static dbdev_tab_t au1xmmc_mem_dbdev = {
+ .dev_id = DSCR_CMD0_ALWAYS,
+ .dev_flags = DEV_FLAGS_ANYUSE,
+ .dev_tsize = 0,
+ .dev_devwidth = 8,
+ .dev_physaddr = 0x00000000,
+ .dev_intlevel = 0,
+ .dev_intpolarity = 0,
+};
+static int memid;
- int card = au1xmmc_card_inserted(host);
- int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0;
+static void au1xmmc_dbdma_callback(int irq, void *dev_id)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *)dev_id;
- if (card != controller) {
- host->flags &= ~HOST_F_ACTIVE;
- if (card) host->flags |= HOST_F_ACTIVE;
- mmc_detect_change(host->mmc, 0);
- }
+ /* Avoid spurious interrupts */
+ if (!host->mrq)
+ return;
- if (host->mrq != NULL) {
- u32 status = au_readl(HOST_STATUS(host));
- DBG("PENDING - %8.8x\n", host->id, status);
- }
+ if (host->flags & HOST_F_STOP)
+ SEND_STOP(host);
- mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT);
+ tasklet_schedule(&host->data_task);
}
-static dbdev_tab_t au1xmmc_mem_dbdev =
-{
- DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 8, 0x00000000, 0, 0
-};
-
-static void au1xmmc_init_dma(struct au1xmmc_host *host)
+static int au1xmmc_dbdma_init(struct au1xmmc_host *host)
{
+ struct resource *res;
+ int txid, rxid;
+
+ res = platform_get_resource(host->pdev, IORESOURCE_DMA, 0);
+ if (!res)
+ return -ENODEV;
+ txid = res->start;
+
+ res = platform_get_resource(host->pdev, IORESOURCE_DMA, 1);
+ if (!res)
+ return -ENODEV;
+ rxid = res->start;
+
+ if (!memid)
+ return -ENODEV;
+
+ host->tx_chan = au1xxx_dbdma_chan_alloc(memid, txid,
+ au1xmmc_dbdma_callback, (void *)host);
+ if (!host->tx_chan) {
+ dev_err(&host->pdev->dev, "cannot allocate TX DMA\n");
+ return -ENODEV;
+ }
- u32 rxchan, txchan;
-
- int txid = au1xmmc_card_table[host->id].tx_devid;
- int rxid = au1xmmc_card_table[host->id].rx_devid;
+ host->rx_chan = au1xxx_dbdma_chan_alloc(rxid, memid,
+ au1xmmc_dbdma_callback, (void *)host);
+ if (!host->rx_chan) {
+ dev_err(&host->pdev->dev, "cannot allocate RX DMA\n");
+ au1xxx_dbdma_chan_free(host->tx_chan);
+ return -ENODEV;
+ }
- /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
- of 8 bits. And since devices are shared, we need to create
- our own to avoid freaking out other devices
- */
+ au1xxx_dbdma_set_devwidth(host->tx_chan, 8);
+ au1xxx_dbdma_set_devwidth(host->rx_chan, 8);
- int memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+ au1xxx_dbdma_ring_alloc(host->tx_chan, AU1XMMC_DESCRIPTOR_COUNT);
+ au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
- txchan = au1xxx_dbdma_chan_alloc(memid, txid,
- au1xmmc_dma_callback, (void *) host);
+ /* DBDMA is good to go */
+ host->flags |= HOST_F_DMA;
- rxchan = au1xxx_dbdma_chan_alloc(rxid, memid,
- au1xmmc_dma_callback, (void *) host);
+ return 0;
+}
- au1xxx_dbdma_set_devwidth(txchan, 8);
- au1xxx_dbdma_set_devwidth(rxchan, 8);
+static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host)
+{
+ if (host->flags & HOST_F_DMA) {
+ host->flags &= ~HOST_F_DMA;
+ au1xxx_dbdma_chan_free(host->tx_chan);
+ au1xxx_dbdma_chan_free(host->rx_chan);
+ }
+}
+#endif
- au1xxx_dbdma_ring_alloc(txchan, AU1XMMC_DESCRIPTOR_COUNT);
- au1xxx_dbdma_ring_alloc(rxchan, AU1XMMC_DESCRIPTOR_COUNT);
+static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
+{
+ struct au1xmmc_host *host = mmc_priv(mmc);
- host->tx_chan = txchan;
- host->rx_chan = rxchan;
+ if (en)
+ IRQ_ON(host, SD_CONFIG_SI);
+ else
+ IRQ_OFF(host, SD_CONFIG_SI);
}
static const struct mmc_host_ops au1xmmc_ops = {
.request = au1xmmc_request,
.set_ios = au1xmmc_set_ios,
.get_ro = au1xmmc_card_readonly,
+ .get_cd = au1xmmc_card_inserted,
+ .enable_sdio_irq = au1xmmc_enable_sdio_irq,
};
static int __devinit au1xmmc_probe(struct platform_device *pdev)
{
+ struct mmc_host *mmc;
+ struct au1xmmc_host *host;
+ struct resource *r;
+ int ret;
+
+ mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
+ if (!mmc) {
+ dev_err(&pdev->dev, "no memory for mmc_host\n");
+ ret = -ENOMEM;
+ goto out0;
+ }
- int i, ret = 0;
-
- /* THe interrupt is shared among all controllers */
- ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, IRQF_DISABLED, "MMC", 0);
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->platdata = pdev->dev.platform_data;
+ host->pdev = pdev;
- if (ret) {
- printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n",
- AU1100_SD_IRQ, ret);
- return -ENXIO;
+ ret = -ENODEV;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no mmio defined\n");
+ goto out1;
}
- disable_irq(AU1100_SD_IRQ);
+ host->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+ pdev->name);
+ if (!host->ioarea) {
+ dev_err(&pdev->dev, "mmio already in use\n");
+ goto out1;
+ }
- for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
- struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
- struct au1xmmc_host *host = 0;
+ host->iobase = (unsigned long)ioremap(r->start, 0x3c);
+ if (!host->iobase) {
+ dev_err(&pdev->dev, "cannot remap mmio\n");
+ goto out2;
+ }
- if (!mmc) {
- printk(DRIVER_NAME "ERROR: no mem for host %d\n", i);
- au1xmmc_hosts[i] = 0;
- continue;
- }
+ r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no IRQ defined\n");
+ goto out3;
+ }
- mmc->ops = &au1xmmc_ops;
+ host->irq = r->start;
+ /* IRQ is shared among both SD controllers */
+ ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED,
+ DRIVER_NAME, host);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot grab IRQ\n");
+ goto out3;
+ }
- mmc->f_min = 450000;
- mmc->f_max = 24000000;
+ mmc->ops = &au1xmmc_ops;
- mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
- mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ mmc->f_min = 450000;
+ mmc->f_max = 24000000;
- mmc->max_blk_size = 2048;
- mmc->max_blk_count = 512;
+ mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
+ mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
- mmc->ocr_avail = AU1XMMC_OCR;
+ mmc->max_blk_size = 2048;
+ mmc->max_blk_count = 512;
- host = mmc_priv(mmc);
- host->mmc = mmc;
+ mmc->ocr_avail = AU1XMMC_OCR;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
- host->id = i;
- host->iobase = au1xmmc_card_table[host->id].iobase;
- host->clock = 0;
- host->power_mode = MMC_POWER_OFF;
+ host->status = HOST_S_IDLE;
- host->flags = au1xmmc_card_inserted(host) ? HOST_F_ACTIVE : 0;
- host->status = HOST_S_IDLE;
+ /* board-specific carddetect setup, if any */
+ if (host->platdata && host->platdata->cd_setup) {
+ ret = host->platdata->cd_setup(mmc, 1);
+ if (ret) {
+ dev_warn(&pdev->dev, "board CD setup failed\n");
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+ }
+ } else
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
- init_timer(&host->timer);
+ tasklet_init(&host->data_task, au1xmmc_tasklet_data,
+ (unsigned long)host);
- host->timer.function = au1xmmc_poll_event;
- host->timer.data = (unsigned long) host;
- host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT;
+ tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
+ (unsigned long)host);
- tasklet_init(&host->data_task, au1xmmc_tasklet_data,
- (unsigned long) host);
+#ifdef CONFIG_SOC_AU1200
+ ret = au1xmmc_dbdma_init(host);
+ if (ret)
+ printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n");
+#endif
- tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
- (unsigned long) host);
+#ifdef CONFIG_LEDS_CLASS
+ if (host->platdata && host->platdata->led) {
+ struct led_classdev *led = host->platdata->led;
+ led->name = mmc_hostname(mmc);
+ led->brightness = LED_OFF;
+ led->default_trigger = mmc_hostname(mmc);
+ ret = led_classdev_register(mmc_dev(mmc), led);
+ if (ret)
+ goto out5;
+ }
+#endif
- spin_lock_init(&host->lock);
+ au1xmmc_reset_controller(host);
- if (dma != 0)
- au1xmmc_init_dma(host);
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot add mmc host\n");
+ goto out6;
+ }
- au1xmmc_reset_controller(host);
+ platform_set_drvdata(pdev, mmc);
- mmc_add_host(mmc);
- au1xmmc_hosts[i] = host;
+ printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
+ " (mode=%s)\n", pdev->id, host->iobase,
+ host->flags & HOST_F_DMA ? "dma" : "pio");
- add_timer(&host->timer);
+ return 0; /* all ok */
- printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X (mode=%s)\n",
- host->id, host->iobase, dma ? "dma" : "pio");
- }
+out6:
+#ifdef CONFIG_LEDS_CLASS
+ if (host->platdata && host->platdata->led)
+ led_classdev_unregister(host->platdata->led);
+out5:
+#endif
+ au_writel(0, HOST_ENABLE(host));
+ au_writel(0, HOST_CONFIG(host));
+ au_writel(0, HOST_CONFIG2(host));
+ au_sync();
- enable_irq(AU1100_SD_IRQ);
+#ifdef CONFIG_SOC_AU1200
+ au1xmmc_dbdma_shutdown(host);
+#endif
- return 0;
+ tasklet_kill(&host->data_task);
+ tasklet_kill(&host->finish_task);
+
+ if (host->platdata && host->platdata->cd_setup &&
+ !(mmc->caps & MMC_CAP_NEEDS_POLL))
+ host->platdata->cd_setup(mmc, 0);
+
+ free_irq(host->irq, host);
+out3:
+ iounmap((void *)host->iobase);
+out2:
+ release_resource(host->ioarea);
+ kfree(host->ioarea);
+out1:
+ mmc_free_host(mmc);
+out0:
+ return ret;
}
static int __devexit au1xmmc_remove(struct platform_device *pdev)
{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct au1xmmc_host *host;
+
+ if (mmc) {
+ host = mmc_priv(mmc);
- int i;
+ mmc_remove_host(mmc);
- disable_irq(AU1100_SD_IRQ);
+#ifdef CONFIG_LEDS_CLASS
+ if (host->platdata && host->platdata->led)
+ led_classdev_unregister(host->platdata->led);
+#endif
- for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
- struct au1xmmc_host *host = au1xmmc_hosts[i];
- if (!host) continue;
+ if (host->platdata && host->platdata->cd_setup &&
+ !(mmc->caps & MMC_CAP_NEEDS_POLL))
+ host->platdata->cd_setup(mmc, 0);
+
+ au_writel(0, HOST_ENABLE(host));
+ au_writel(0, HOST_CONFIG(host));
+ au_writel(0, HOST_CONFIG2(host));
+ au_sync();
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
- del_timer_sync(&host->timer);
+#ifdef CONFIG_SOC_AU1200
+ au1xmmc_dbdma_shutdown(host);
+#endif
au1xmmc_set_power(host, 0);
- mmc_remove_host(host->mmc);
-
- au1xxx_dbdma_chan_free(host->tx_chan);
- au1xxx_dbdma_chan_free(host->rx_chan);
+ free_irq(host->irq, host);
+ iounmap((void *)host->iobase);
+ release_resource(host->ioarea);
+ kfree(host->ioarea);
- au_writel(0x0, HOST_ENABLE(host));
- au_sync();
+ mmc_free_host(mmc);
}
-
- free_irq(AU1100_SD_IRQ, 0);
return 0;
}
@@ -1004,21 +1140,31 @@ static struct platform_driver au1xmmc_driver = {
static int __init au1xmmc_init(void)
{
+#ifdef CONFIG_SOC_AU1200
+ /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+ * of 8 bits. And since devices are shared, we need to create
+ * our own to avoid freaking out other devices.
+ */
+ memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+ if (!memid)
+ printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n");
+#endif
return platform_driver_register(&au1xmmc_driver);
}
static void __exit au1xmmc_exit(void)
{
+#ifdef CONFIG_SOC_AU1200
+ if (memid)
+ au1xxx_ddma_del_device(memid);
+#endif
platform_driver_unregister(&au1xmmc_driver);
}
module_init(au1xmmc_init);
module_exit(au1xmmc_exit);
-#ifdef MODULE
MODULE_AUTHOR("Advanced Micro Devices, Inc");
MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:au1xxx-mmc");
-#endif
-
diff --git a/drivers/mmc/host/au1xmmc.h b/drivers/mmc/host/au1xmmc.h
deleted file mode 100644
index 341cbdf0bac..00000000000
--- a/drivers/mmc/host/au1xmmc.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef _AU1XMMC_H_
-#define _AU1XMMC_H_
-
-/* Hardware definitions */
-
-#define AU1XMMC_DESCRIPTOR_COUNT 1
-#define AU1XMMC_DESCRIPTOR_SIZE 2048
-
-#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
- MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
- MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
-
-/* Easy access macros */
-
-#define HOST_STATUS(h) ((h)->iobase + SD_STATUS)
-#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG)
-#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE)
-#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT)
-#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT)
-#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG)
-#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE)
-#define HOST_CMD(h) ((h)->iobase + SD_CMD)
-#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2)
-#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT)
-#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG)
-
-#define DMA_CHANNEL(h) \
- ( ((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
-
-/* This gives us a hard value for the stop command that we can write directly
- * to the command register
- */
-
-#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO)
-
-/* This is the set of interrupts that we configure by default */
-
-#if 0
-#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \
- SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
-#endif
-
-#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \
- SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
-/* The poll event (looking for insert/remove events runs twice a second */
-#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
-
-struct au1xmmc_host {
- struct mmc_host *mmc;
- struct mmc_request *mrq;
-
- u32 id;
-
- u32 flags;
- u32 iobase;
- u32 clock;
- u32 bus_width;
- u32 power_mode;
-
- int status;
-
- struct {
- int len;
- int dir;
- } dma;
-
- struct {
- int index;
- int offset;
- int len;
- } pio;
-
- u32 tx_chan;
- u32 rx_chan;
-
- struct timer_list timer;
- struct tasklet_struct finish_task;
- struct tasklet_struct data_task;
-
- spinlock_t lock;
-};
-
-/* Status flags used by the host structure */
-
-#define HOST_F_XMIT 0x0001
-#define HOST_F_RECV 0x0002
-#define HOST_F_DMA 0x0010
-#define HOST_F_ACTIVE 0x0100
-#define HOST_F_STOP 0x1000
-
-#define HOST_S_IDLE 0x0001
-#define HOST_S_CMD 0x0002
-#define HOST_S_DATA 0x0003
-#define HOST_S_STOP 0x0004
-
-#endif
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index eed211b2ac7..5e880c0f134 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -892,9 +892,12 @@ static int imxmci_get_ro(struct mmc_host *mmc)
struct imxmci_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->get_ro)
- return host->pdata->get_ro(mmc_dev(mmc));
- /* Host doesn't support read only detection so assume writeable */
- return 0;
+ return !!host->pdata->get_ro(mmc_dev(mmc));
+ /*
+ * Board doesn't support read only detection; let the mmc core
+ * decide what to do.
+ */
+ return -ENOSYS;
}
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 35508584ac2..41cc63360e4 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1126,16 +1126,28 @@ static int mmc_spi_get_ro(struct mmc_host *mmc)
struct mmc_spi_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->get_ro)
- return host->pdata->get_ro(mmc->parent);
- /* board doesn't support read only detection; assume writeable */
- return 0;
+ return !!host->pdata->get_ro(mmc->parent);
+ /*
+ * Board doesn't support read only detection; let the mmc core
+ * decide what to do.
+ */
+ return -ENOSYS;
}
+static int mmc_spi_get_cd(struct mmc_host *mmc)
+{
+ struct mmc_spi_host *host = mmc_priv(mmc);
+
+ if (host->pdata && host->pdata->get_cd)
+ return !!host->pdata->get_cd(mmc->parent);
+ return -ENOSYS;
+}
static const struct mmc_host_ops mmc_spi_ops = {
.request = mmc_spi_request,
.set_ios = mmc_spi_set_ios,
.get_ro = mmc_spi_get_ro,
+ .get_cd = mmc_spi_get_cd,
};
@@ -1240,10 +1252,7 @@ static int mmc_spi_probe(struct spi_device *spi)
mmc->ops = &mmc_spi_ops;
mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
- /* As long as we keep track of the number of successfully
- * transmitted blocks, we're good for multiwrite.
- */
- mmc->caps = MMC_CAP_SPI | MMC_CAP_MULTIWRITE;
+ mmc->caps = MMC_CAP_SPI;
/* SPI doesn't need the lowspeed device identification thing for
* MMC or SD cards, since it never comes up in open drain mode.
@@ -1319,17 +1328,23 @@ static int mmc_spi_probe(struct spi_device *spi)
goto fail_glue_init;
}
+ /* pass platform capabilities, if any */
+ if (host->pdata)
+ mmc->caps |= host->pdata->caps;
+
status = mmc_add_host(mmc);
if (status != 0)
goto fail_add_host;
- dev_info(&spi->dev, "SD/MMC host %s%s%s%s\n",
+ dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n",
mmc->class_dev.bus_id,
host->dma_dev ? "" : ", no DMA",
(host->pdata && host->pdata->get_ro)
? "" : ", no WP",
(host->pdata && host->pdata->setpower)
- ? "" : ", no poweroff");
+ ? "" : ", no poweroff",
+ (mmc->caps & MMC_CAP_NEEDS_POLL)
+ ? ", cd polling" : "");
return 0;
fail_add_host:
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index da5fecad74d..696cf3647ce 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -535,7 +535,6 @@ static int mmci_probe(struct amba_device *dev, void *id)
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
mmc->ocr_avail = plat->ocr_mask;
- mmc->caps = MMC_CAP_MULTIWRITE;
/*
* We can do SGIO
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 549517c3567..dbc26eb6a89 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
host->slots[id] = slot;
- mmc->caps = MMC_CAP_MULTIWRITE;
+ mmc->caps = 0;
if (host->pdata->conf.wire4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index d89475d3698..d39f5973886 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -374,9 +374,12 @@ static int pxamci_get_ro(struct mmc_host *mmc)
struct pxamci_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->get_ro)
- return host->pdata->get_ro(mmc_dev(mmc));
- /* Host doesn't support read only detection so assume writeable */
- return 0;
+ return !!host->pdata->get_ro(mmc_dev(mmc));
+ /*
+ * Board doesn't support read only detection; let the mmc core
+ * decide what to do.
+ */
+ return -ENOSYS;
}
static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
new file mode 100644
index 00000000000..6a1e4994b72
--- /dev/null
+++ b/drivers/mmc/host/s3cmci.c
@@ -0,0 +1,1446 @@
+/*
+ * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/dma.h>
+
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/mci.h>
+
+#include "s3cmci.h"
+
+#define DRIVER_NAME "s3c-mci"
+
+enum dbg_channels {
+ dbg_err = (1 << 0),
+ dbg_debug = (1 << 1),
+ dbg_info = (1 << 2),
+ dbg_irq = (1 << 3),
+ dbg_sg = (1 << 4),
+ dbg_dma = (1 << 5),
+ dbg_pio = (1 << 6),
+ dbg_fail = (1 << 7),
+ dbg_conf = (1 << 8),
+};
+
+static const int dbgmap_err = dbg_err | dbg_fail;
+static const int dbgmap_info = dbg_info | dbg_conf;
+static const int dbgmap_debug = dbg_debug;
+
+#define dbg(host, channels, args...) \
+ do { \
+ if (dbgmap_err & channels) \
+ dev_err(&host->pdev->dev, args); \
+ else if (dbgmap_info & channels) \
+ dev_info(&host->pdev->dev, args); \
+ else if (dbgmap_debug & channels) \
+ dev_dbg(&host->pdev->dev, args); \
+ } while (0)
+
+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
+
+static struct s3c2410_dma_client s3cmci_dma_client = {
+ .name = "s3c-mci",
+};
+
+static void finalize_request(struct s3cmci_host *host);
+static void s3cmci_send_request(struct mmc_host *mmc);
+static void s3cmci_reset(struct s3cmci_host *host);
+
+#ifdef CONFIG_MMC_DEBUG
+
+static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
+{
+ u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
+ u32 datcon, datcnt, datsta, fsta, imask;
+
+ con = readl(host->base + S3C2410_SDICON);
+ pre = readl(host->base + S3C2410_SDIPRE);
+ cmdarg = readl(host->base + S3C2410_SDICMDARG);
+ cmdcon = readl(host->base + S3C2410_SDICMDCON);
+ cmdsta = readl(host->base + S3C2410_SDICMDSTAT);
+ r0 = readl(host->base + S3C2410_SDIRSP0);
+ r1 = readl(host->base + S3C2410_SDIRSP1);
+ r2 = readl(host->base + S3C2410_SDIRSP2);
+ r3 = readl(host->base + S3C2410_SDIRSP3);
+ timer = readl(host->base + S3C2410_SDITIMER);
+ bsize = readl(host->base + S3C2410_SDIBSIZE);
+ datcon = readl(host->base + S3C2410_SDIDCON);
+ datcnt = readl(host->base + S3C2410_SDIDCNT);
+ datsta = readl(host->base + S3C2410_SDIDSTA);
+ fsta = readl(host->base + S3C2410_SDIFSTA);
+ imask = readl(host->base + host->sdiimsk);
+
+ dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n",
+ prefix, con, pre, timer);
+
+ dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
+ prefix, cmdcon, cmdarg, cmdsta);
+
+ dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
+ " DSTA:[%08x] DCNT:[%08x]\n",
+ prefix, datcon, fsta, datsta, datcnt);
+
+ dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]"
+ " R2:[%08x] R3:[%08x]\n",
+ prefix, r0, r1, r2, r3);
+}
+
+static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
+ int stop)
+{
+ snprintf(host->dbgmsg_cmd, 300,
+ "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
+ host->ccnt, (stop ? " (STOP)" : ""),
+ cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
+
+ if (cmd->data) {
+ snprintf(host->dbgmsg_dat, 300,
+ "#%u bsize:%u blocks:%u bytes:%u",
+ host->dcnt, cmd->data->blksz,
+ cmd->data->blocks,
+ cmd->data->blocks * cmd->data->blksz);
+ } else {
+ host->dbgmsg_dat[0] = '\0';
+ }
+}
+
+static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
+ int fail)
+{
+ unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
+
+ if (!cmd)
+ return;
+
+ if (cmd->error == 0) {
+ dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
+ host->dbgmsg_cmd, cmd->resp[0]);
+ } else {
+ dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
+ cmd->error, host->dbgmsg_cmd, host->status);
+ }
+
+ if (!cmd->data)
+ return;
+
+ if (cmd->data->error == 0) {
+ dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
+ } else {
+ dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
+ cmd->data->error, host->dbgmsg_dat,
+ readl(host->base + S3C2410_SDIDCNT));
+ }
+}
+#else
+static void dbg_dumpcmd(struct s3cmci_host *host,
+ struct mmc_command *cmd, int fail) { }
+
+static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
+ int stop) { }
+
+static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
+
+#endif /* CONFIG_MMC_DEBUG */
+
+static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
+{
+ u32 newmask;
+
+ newmask = readl(host->base + host->sdiimsk);
+ newmask |= imask;
+
+ writel(newmask, host->base + host->sdiimsk);
+
+ return newmask;
+}
+
+static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
+{
+ u32 newmask;
+
+ newmask = readl(host->base + host->sdiimsk);
+ newmask &= ~imask;
+
+ writel(newmask, host->base + host->sdiimsk);
+
+ return newmask;
+}
+
+static inline void clear_imask(struct s3cmci_host *host)
+{
+ writel(0, host->base + host->sdiimsk);
+}
+
+static inline int get_data_buffer(struct s3cmci_host *host,
+ u32 *words, u32 **pointer)
+{
+ struct scatterlist *sg;
+
+ if (host->pio_active == XFER_NONE)
+ return -EINVAL;
+
+ if ((!host->mrq) || (!host->mrq->data))
+ return -EINVAL;
+
+ if (host->pio_sgptr >= host->mrq->data->sg_len) {
+ dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
+ host->pio_sgptr, host->mrq->data->sg_len);
+ return -EBUSY;
+ }
+ sg = &host->mrq->data->sg[host->pio_sgptr];
+
+ *words = sg->length >> 2;
+ *pointer = sg_virt(sg);
+
+ host->pio_sgptr++;
+
+ dbg(host, dbg_sg, "new buffer (%i/%i)\n",
+ host->pio_sgptr, host->mrq->data->sg_len);
+
+ return 0;
+}
+
+static inline u32 fifo_count(struct s3cmci_host *host)
+{
+ u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
+
+ fifostat &= S3C2410_SDIFSTA_COUNTMASK;
+ return fifostat >> 2;
+}
+
+static inline u32 fifo_free(struct s3cmci_host *host)
+{
+ u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
+
+ fifostat &= S3C2410_SDIFSTA_COUNTMASK;
+ return (63 - fifostat) >> 2;
+}
+
+static void do_pio_read(struct s3cmci_host *host)
+{
+ int res;
+ u32 fifo;
+ void __iomem *from_ptr;
+
+ /* write real prescaler to host, it might be set slow to fix */
+ writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+ from_ptr = host->base + host->sdidata;
+
+ while ((fifo = fifo_count(host))) {
+ if (!host->pio_words) {
+ res = get_data_buffer(host, &host->pio_words,
+ &host->pio_ptr);
+ if (res) {
+ host->pio_active = XFER_NONE;
+ host->complete_what = COMPLETION_FINALIZE;
+
+ dbg(host, dbg_pio, "pio_read(): "
+ "complete (no more data).\n");
+ return;
+ }
+
+ dbg(host, dbg_pio,
+ "pio_read(): new target: [%i]@[%p]\n",
+ host->pio_words, host->pio_ptr);
+ }
+
+ dbg(host, dbg_pio,
+ "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
+ fifo, host->pio_words,
+ readl(host->base + S3C2410_SDIDCNT));
+
+ if (fifo > host->pio_words)
+ fifo = host->pio_words;
+
+ host->pio_words -= fifo;
+ host->pio_count += fifo;
+
+ while (fifo--)
+ *(host->pio_ptr++) = readl(from_ptr);
+ }
+
+ if (!host->pio_words) {
+ res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
+ if (res) {
+ dbg(host, dbg_pio,
+ "pio_read(): complete (no more buffers).\n");
+ host->pio_active = XFER_NONE;
+ host->complete_what = COMPLETION_FINALIZE;
+
+ return;
+ }
+ }
+
+ enable_imask(host,
+ S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
+}
+
+static void do_pio_write(struct s3cmci_host *host)
+{
+ void __iomem *to_ptr;
+ int res;
+ u32 fifo;
+
+ to_ptr = host->base + host->sdidata;
+
+ while ((fifo = fifo_free(host))) {
+ if (!host->pio_words) {
+ res = get_data_buffer(host, &host->pio_words,
+ &host->pio_ptr);
+ if (res) {
+ dbg(host, dbg_pio,
+ "pio_write(): complete (no more data).\n");
+ host->pio_active = XFER_NONE;
+
+ return;
+ }
+
+ dbg(host, dbg_pio,
+ "pio_write(): new source: [%i]@[%p]\n",
+ host->pio_words, host->pio_ptr);
+
+ }
+
+ if (fifo > host->pio_words)
+ fifo = host->pio_words;
+
+ host->pio_words -= fifo;
+ host->pio_count += fifo;
+
+ while (fifo--)
+ writel(*(host->pio_ptr++), to_ptr);
+ }
+
+ enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+}
+
+static void pio_tasklet(unsigned long data)
+{
+ struct s3cmci_host *host = (struct s3cmci_host *) data;
+
+
+ disable_irq(host->irq);
+
+ if (host->pio_active == XFER_WRITE)
+ do_pio_write(host);
+
+ if (host->pio_active == XFER_READ)
+ do_pio_read(host);
+
+ if (host->complete_what == COMPLETION_FINALIZE) {
+ clear_imask(host);
+ if (host->pio_active != XFER_NONE) {
+ dbg(host, dbg_err, "unfinished %s "
+ "- pio_count:[%u] pio_words:[%u]\n",
+ (host->pio_active == XFER_READ) ? "read" : "write",
+ host->pio_count, host->pio_words);
+
+ if (host->mrq->data)
+ host->mrq->data->error = -EINVAL;
+ }
+
+ finalize_request(host);
+ } else
+ enable_irq(host->irq);
+}
+
+/*
+ * ISR for SDI Interface IRQ
+ * Communication between driver and ISR works as follows:
+ * host->mrq points to current request
+ * host->complete_what Indicates when the request is considered done
+ * COMPLETION_CMDSENT when the command was sent
+ * COMPLETION_RSPFIN when a response was received
+ * COMPLETION_XFERFINISH when the data transfer is finished
+ * COMPLETION_XFERFINISH_RSPFIN both of the above.
+ * host->complete_request is the completion-object the driver waits for
+ *
+ * 1) Driver sets up host->mrq and host->complete_what
+ * 2) Driver prepares the transfer
+ * 3) Driver enables interrupts
+ * 4) Driver starts transfer
+ * 5) Driver waits for host->complete_rquest
+ * 6) ISR checks for request status (errors and success)
+ * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
+ * 7) ISR completes host->complete_request
+ * 8) ISR disables interrupts
+ * 9) Driver wakes up and takes care of the request
+ *
+ * Note: "->error"-fields are expected to be set to 0 before the request
+ * was issued by mmc.c - therefore they are only set, when an error
+ * contition comes up
+ */
+
+static irqreturn_t s3cmci_irq(int irq, void *dev_id)
+{
+ struct s3cmci_host *host = dev_id;
+ struct mmc_command *cmd;
+ u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
+ u32 mci_cclear, mci_dclear;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&host->complete_lock, iflags);
+
+ mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
+ mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+ mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
+ mci_fsta = readl(host->base + S3C2410_SDIFSTA);
+ mci_imsk = readl(host->base + host->sdiimsk);
+ mci_cclear = 0;
+ mci_dclear = 0;
+
+ if ((host->complete_what == COMPLETION_NONE) ||
+ (host->complete_what == COMPLETION_FINALIZE)) {
+ host->status = "nothing to complete";
+ clear_imask(host);
+ goto irq_out;
+ }
+
+ if (!host->mrq) {
+ host->status = "no active mrq";
+ clear_imask(host);
+ goto irq_out;
+ }
+
+ cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
+
+ if (!cmd) {
+ host->status = "no active cmd";
+ clear_imask(host);
+ goto irq_out;
+ }
+
+ if (!host->dodma) {
+ if ((host->pio_active == XFER_WRITE) &&
+ (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
+
+ disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+ tasklet_schedule(&host->pio_tasklet);
+ host->status = "pio tx";
+ }
+
+ if ((host->pio_active == XFER_READ) &&
+ (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
+
+ disable_imask(host,
+ S3C2410_SDIIMSK_RXFIFOHALF |
+ S3C2410_SDIIMSK_RXFIFOLAST);
+
+ tasklet_schedule(&host->pio_tasklet);
+ host->status = "pio rx";
+ }
+ }
+
+ if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
+ dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
+ cmd->error = -ETIMEDOUT;
+ host->status = "error: command timeout";
+ goto fail_transfer;
+ }
+
+ if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
+ if (host->complete_what == COMPLETION_CMDSENT) {
+ host->status = "ok: command sent";
+ goto close_transfer;
+ }
+
+ mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
+ }
+
+ if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
+ if (cmd->flags & MMC_RSP_CRC) {
+ if (host->mrq->cmd->flags & MMC_RSP_136) {
+ dbg(host, dbg_irq,
+ "fixup: ignore CRC fail with long rsp\n");
+ } else {
+ /* note, we used to fail the transfer
+ * here, but it seems that this is just
+ * the hardware getting it wrong.
+ *
+ * cmd->error = -EILSEQ;
+ * host->status = "error: bad command crc";
+ * goto fail_transfer;
+ */
+ }
+ }
+
+ mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
+ }
+
+ if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
+ if (host->complete_what == COMPLETION_RSPFIN) {
+ host->status = "ok: command response received";
+ goto close_transfer;
+ }
+
+ if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
+ host->complete_what = COMPLETION_XFERFINISH;
+
+ mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
+ }
+
+ /* errors handled after this point are only relevant
+ when a data transfer is in progress */
+
+ if (!cmd->data)
+ goto clear_status_bits;
+
+ /* Check for FIFO failure */
+ if (host->is2440) {
+ if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
+ dbg(host, dbg_err, "FIFO failure\n");
+ host->mrq->data->error = -EILSEQ;
+ host->status = "error: 2440 fifo failure";
+ goto fail_transfer;
+ }
+ } else {
+ if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
+ dbg(host, dbg_err, "FIFO failure\n");
+ cmd->data->error = -EILSEQ;
+ host->status = "error: fifo failure";
+ goto fail_transfer;
+ }
+ }
+
+ if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
+ dbg(host, dbg_err, "bad data crc (outgoing)\n");
+ cmd->data->error = -EILSEQ;
+ host->status = "error: bad data crc (outgoing)";
+ goto fail_transfer;
+ }
+
+ if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
+ dbg(host, dbg_err, "bad data crc (incoming)\n");
+ cmd->data->error = -EILSEQ;
+ host->status = "error: bad data crc (incoming)";
+ goto fail_transfer;
+ }
+
+ if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
+ dbg(host, dbg_err, "data timeout\n");
+ cmd->data->error = -ETIMEDOUT;
+ host->status = "error: data timeout";
+ goto fail_transfer;
+ }
+
+ if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
+ if (host->complete_what == COMPLETION_XFERFINISH) {
+ host->status = "ok: data transfer completed";
+ goto close_transfer;
+ }
+
+ if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
+ host->complete_what = COMPLETION_RSPFIN;
+
+ mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
+ }
+
+clear_status_bits:
+ writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
+ writel(mci_dclear, host->base + S3C2410_SDIDSTA);
+
+ goto irq_out;
+
+fail_transfer:
+ host->pio_active = XFER_NONE;
+
+close_transfer:
+ host->complete_what = COMPLETION_FINALIZE;
+
+ clear_imask(host);
+ tasklet_schedule(&host->pio_tasklet);
+
+ goto irq_out;
+
+irq_out:
+ dbg(host, dbg_irq,
+ "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
+ mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
+
+ spin_unlock_irqrestore(&host->complete_lock, iflags);
+ return IRQ_HANDLED;
+
+}
+
+/*
+ * ISR for the CardDetect Pin
+*/
+
+static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
+{
+ struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
+
+ dbg(host, dbg_irq, "card detect\n");
+
+ mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+
+ return IRQ_HANDLED;
+}
+
+void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
+ int size, enum s3c2410_dma_buffresult result)
+{
+ struct s3cmci_host *host = buf_id;
+ unsigned long iflags;
+ u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt;
+
+ mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
+ mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+ mci_fsta = readl(host->base + S3C2410_SDIFSTA);
+ mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
+
+ BUG_ON(!host->mrq);
+ BUG_ON(!host->mrq->data);
+ BUG_ON(!host->dmatogo);
+
+ spin_lock_irqsave(&host->complete_lock, iflags);
+
+ if (result != S3C2410_RES_OK) {
+ dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x "
+ "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n",
+ mci_csta, mci_dsta, mci_fsta,
+ mci_dcnt, result, host->dmatogo);
+
+ goto fail_request;
+ }
+
+ host->dmatogo--;
+ if (host->dmatogo) {
+ dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] "
+ "DCNT:[%08x] toGo:%u\n",
+ size, mci_dsta, mci_dcnt, host->dmatogo);
+
+ goto out;
+ }
+
+ dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
+ size, mci_dsta, mci_dcnt);
+
+ host->complete_what = COMPLETION_FINALIZE;
+
+out:
+ tasklet_schedule(&host->pio_tasklet);
+ spin_unlock_irqrestore(&host->complete_lock, iflags);
+ return;
+
+fail_request:
+ host->mrq->data->error = -EINVAL;
+ host->complete_what = COMPLETION_FINALIZE;
+ writel(0, host->base + host->sdiimsk);
+ goto out;
+
+}
+
+static void finalize_request(struct s3cmci_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+ int debug_as_failure = 0;
+
+ if (host->complete_what != COMPLETION_FINALIZE)
+ return;
+
+ if (!mrq)
+ return;
+
+ if (cmd->data && (cmd->error == 0) &&
+ (cmd->data->error == 0)) {
+ if (host->dodma && (!host->dma_complete)) {
+ dbg(host, dbg_dma, "DMA Missing!\n");
+ return;
+ }
+ }
+
+ /* Read response from controller. */
+ cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
+ cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
+ cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
+ cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
+
+ writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+ if (cmd->error)
+ debug_as_failure = 1;
+
+ if (cmd->data && cmd->data->error)
+ debug_as_failure = 1;
+
+ dbg_dumpcmd(host, cmd, debug_as_failure);
+
+ /* Cleanup controller */
+ writel(0, host->base + S3C2410_SDICMDARG);
+ writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
+ writel(0, host->base + S3C2410_SDICMDCON);
+ writel(0, host->base + host->sdiimsk);
+
+ if (cmd->data && cmd->error)
+ cmd->data->error = cmd->error;
+
+ if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
+ host->cmd_is_stop = 1;
+ s3cmci_send_request(host->mmc);
+ return;
+ }
+
+ /* If we have no data transfer we are finished here */
+ if (!mrq->data)
+ goto request_done;
+
+ /* Calulate the amout of bytes transfer if there was no error */
+ if (mrq->data->error == 0) {
+ mrq->data->bytes_xfered =
+ (mrq->data->blocks * mrq->data->blksz);
+ } else {
+ mrq->data->bytes_xfered = 0;
+ }
+
+ /* If we had an error while transfering data we flush the
+ * DMA channel and the fifo to clear out any garbage. */
+ if (mrq->data->error != 0) {
+ if (host->dodma)
+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
+
+ if (host->is2440) {
+ /* Clear failure register and reset fifo. */
+ writel(S3C2440_SDIFSTA_FIFORESET |
+ S3C2440_SDIFSTA_FIFOFAIL,
+ host->base + S3C2410_SDIFSTA);
+ } else {
+ u32 mci_con;
+
+ /* reset fifo */
+ mci_con = readl(host->base + S3C2410_SDICON);
+ mci_con |= S3C2410_SDICON_FIFORESET;
+
+ writel(mci_con, host->base + S3C2410_SDICON);
+ }
+ }
+
+request_done:
+ host->complete_what = COMPLETION_NONE;
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, mrq);
+}
+
+
+void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+{
+ static enum s3c2410_dmasrc last_source = -1;
+ static int setup_ok;
+
+ if (last_source == source)
+ return;
+
+ last_source = source;
+
+ s3c2410_dma_devconfig(host->dma, source, 3,
+ host->mem->start + host->sdidata);
+
+ if (!setup_ok) {
+ s3c2410_dma_config(host->dma, 4,
+ (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+ s3c2410_dma_set_buffdone_fn(host->dma,
+ s3cmci_dma_done_callback);
+ s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
+ setup_ok = 1;
+ }
+}
+
+static void s3cmci_send_command(struct s3cmci_host *host,
+ struct mmc_command *cmd)
+{
+ u32 ccon, imsk;
+
+ imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
+ S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
+ S3C2410_SDIIMSK_RESPONSECRC;
+
+ enable_imask(host, imsk);
+
+ if (cmd->data)
+ host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
+ else if (cmd->flags & MMC_RSP_PRESENT)
+ host->complete_what = COMPLETION_RSPFIN;
+ else
+ host->complete_what = COMPLETION_CMDSENT;
+
+ writel(cmd->arg, host->base + S3C2410_SDICMDARG);
+
+ ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX;
+ ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
+
+ if (cmd->flags & MMC_RSP_PRESENT)
+ ccon |= S3C2410_SDICMDCON_WAITRSP;
+
+ if (cmd->flags & MMC_RSP_136)
+ ccon |= S3C2410_SDICMDCON_LONGRSP;
+
+ writel(ccon, host->base + S3C2410_SDICMDCON);
+}
+
+static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
+{
+ u32 dcon, imsk, stoptries = 3;
+
+ /* write DCON register */
+
+ if (!data) {
+ writel(0, host->base + S3C2410_SDIDCON);
+ return 0;
+ }
+
+ if ((data->blksz & 3) != 0) {
+ /* We cannot deal with unaligned blocks with more than
+ * one block being transfered. */
+
+ if (data->blocks > 1)
+ return -EINVAL;
+
+ /* No support yet for non-word block transfers. */
+ return -EINVAL;
+ }
+
+ while (readl(host->base + S3C2410_SDIDSTA) &
+ (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
+
+ dbg(host, dbg_err,
+ "mci_setup_data() transfer stillin progress.\n");
+
+ writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
+ s3cmci_reset(host);
+
+ if ((stoptries--) == 0) {
+ dbg_dumpregs(host, "DRF");
+ return -EINVAL;
+ }
+ }
+
+ dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
+
+ if (host->dodma)
+ dcon |= S3C2410_SDIDCON_DMAEN;
+
+ if (host->bus_width == MMC_BUS_WIDTH_4)
+ dcon |= S3C2410_SDIDCON_WIDEBUS;
+
+ if (!(data->flags & MMC_DATA_STREAM))
+ dcon |= S3C2410_SDIDCON_BLOCKMODE;
+
+ if (data->flags & MMC_DATA_WRITE) {
+ dcon |= S3C2410_SDIDCON_TXAFTERRESP;
+ dcon |= S3C2410_SDIDCON_XFER_TXSTART;
+ }
+
+ if (data->flags & MMC_DATA_READ) {
+ dcon |= S3C2410_SDIDCON_RXAFTERCMD;
+ dcon |= S3C2410_SDIDCON_XFER_RXSTART;
+ }
+
+ if (host->is2440) {
+ dcon |= S3C2440_SDIDCON_DS_WORD;
+ dcon |= S3C2440_SDIDCON_DATSTART;
+ }
+
+ writel(dcon, host->base + S3C2410_SDIDCON);
+
+ /* write BSIZE register */
+
+ writel(data->blksz, host->base + S3C2410_SDIBSIZE);
+
+ /* add to IMASK register */
+ imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
+ S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
+
+ enable_imask(host, imsk);
+
+ /* write TIMER register */
+
+ if (host->is2440) {
+ writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
+ } else {
+ writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
+
+ /* FIX: set slow clock to prevent timeouts on read */
+ if (data->flags & MMC_DATA_READ)
+ writel(0xFF, host->base + S3C2410_SDIPRE);
+ }
+
+ return 0;
+}
+
+#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
+
+static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
+{
+ int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+
+ BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
+
+ host->pio_sgptr = 0;
+ host->pio_words = 0;
+ host->pio_count = 0;
+ host->pio_active = rw ? XFER_WRITE : XFER_READ;
+
+ if (rw) {
+ do_pio_write(host);
+ enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+ } else {
+ enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
+ | S3C2410_SDIIMSK_RXFIFOLAST);
+ }
+
+ return 0;
+}
+
+static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
+{
+ int dma_len, i;
+ int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+
+ BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
+
+ s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
+
+ dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ if (dma_len == 0)
+ return -ENOMEM;
+
+ host->dma_complete = 0;
+ host->dmatogo = dma_len;
+
+ for (i = 0; i < dma_len; i++) {
+ int res;
+
+ dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i,
+ sg_dma_address(&data->sg[i]),
+ sg_dma_len(&data->sg[i]));
+
+ res = s3c2410_dma_enqueue(host->dma, (void *) host,
+ sg_dma_address(&data->sg[i]),
+ sg_dma_len(&data->sg[i]));
+
+ if (res) {
+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
+ return -EBUSY;
+ }
+ }
+
+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START);
+
+ return 0;
+}
+
+static void s3cmci_send_request(struct mmc_host *mmc)
+{
+ struct s3cmci_host *host = mmc_priv(mmc);
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+
+ host->ccnt++;
+ prepare_dbgmsg(host, cmd, host->cmd_is_stop);
+
+ /* Clear command, data and fifo status registers
+ Fifo clear only necessary on 2440, but doesn't hurt on 2410
+ */
+ writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
+ writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
+ writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
+
+ if (cmd->data) {
+ int res = s3cmci_setup_data(host, cmd->data);
+
+ host->dcnt++;
+
+ if (res) {
+ dbg(host, dbg_err, "setup data error %d\n", res);
+ cmd->error = res;
+ cmd->data->error = res;
+
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ if (host->dodma)
+ res = s3cmci_prepare_dma(host, cmd->data);
+ else
+ res = s3cmci_prepare_pio(host, cmd->data);
+
+ if (res) {
+ dbg(host, dbg_err, "data prepare error %d\n", res);
+ cmd->error = res;
+ cmd->data->error = res;
+
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+ }
+
+ /* Send command */
+ s3cmci_send_command(host, cmd);
+
+ /* Enable Interrupt */
+ enable_irq(host->irq);
+}
+
+static int s3cmci_card_present(struct s3cmci_host *host)
+{
+ struct s3c24xx_mci_pdata *pdata = host->pdata;
+ int ret;
+
+ if (pdata->gpio_detect == 0)
+ return -ENOSYS;
+
+ ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1;
+ return ret ^ pdata->detect_invert;
+}
+
+static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct s3cmci_host *host = mmc_priv(mmc);
+
+ host->status = "mmc request";
+ host->cmd_is_stop = 0;
+ host->mrq = mrq;
+
+ if (s3cmci_card_present(host) == 0) {
+ dbg(host, dbg_err, "%s: no medium present\n", __func__);
+ host->mrq->cmd->error = -ENOMEDIUM;
+ mmc_request_done(mmc, mrq);
+ } else
+ s3cmci_send_request(mmc);
+}
+
+static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct s3cmci_host *host = mmc_priv(mmc);
+ u32 mci_psc, mci_con;
+
+ /* Set the power state */
+
+ mci_con = readl(host->base + S3C2410_SDICON);
+
+ switch (ios->power_mode) {
+ case MMC_POWER_ON:
+ case MMC_POWER_UP:
+ s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
+ s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
+ s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+ s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
+ s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
+
+ if (host->pdata->set_power)
+ host->pdata->set_power(ios->power_mode, ios->vdd);
+
+ if (!host->is2440)
+ mci_con |= S3C2410_SDICON_FIFORESET;
+
+ break;
+
+ case MMC_POWER_OFF:
+ default:
+ s3c2410_gpio_setpin(S3C2410_GPE5, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+
+ if (host->is2440)
+ mci_con |= S3C2440_SDICON_SDRESET;
+
+ if (host->pdata->set_power)
+ host->pdata->set_power(ios->power_mode, ios->vdd);
+
+ break;
+ }
+
+ /* Set clock */
+ for (mci_psc = 0; mci_psc < 255; mci_psc++) {
+ host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
+
+ if (host->real_rate <= ios->clock)
+ break;
+ }
+
+ if (mci_psc > 255)
+ mci_psc = 255;
+
+ host->prescaler = mci_psc;
+ writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+ /* If requested clock is 0, real_rate will be 0, too */
+ if (ios->clock == 0)
+ host->real_rate = 0;
+
+ /* Set CLOCK_ENABLE */
+ if (ios->clock)
+ mci_con |= S3C2410_SDICON_CLOCKTYPE;
+ else
+ mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
+
+ writel(mci_con, host->base + S3C2410_SDICON);
+
+ if ((ios->power_mode == MMC_POWER_ON) ||
+ (ios->power_mode == MMC_POWER_UP)) {
+ dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
+ host->real_rate/1000, ios->clock/1000);
+ } else {
+ dbg(host, dbg_conf, "powered down.\n");
+ }
+
+ host->bus_width = ios->bus_width;
+}
+
+static void s3cmci_reset(struct s3cmci_host *host)
+{
+ u32 con = readl(host->base + S3C2410_SDICON);
+
+ con |= S3C2440_SDICON_SDRESET;
+ writel(con, host->base + S3C2410_SDICON);
+}
+
+static int s3cmci_get_ro(struct mmc_host *mmc)
+{
+ struct s3cmci_host *host = mmc_priv(mmc);
+ struct s3c24xx_mci_pdata *pdata = host->pdata;
+ int ret;
+
+ if (pdata->gpio_wprotect == 0)
+ return 0;
+
+ ret = s3c2410_gpio_getpin(pdata->gpio_wprotect);
+
+ if (pdata->wprotect_invert)
+ ret = !ret;
+
+ return ret;
+}
+
+static struct mmc_host_ops s3cmci_ops = {
+ .request = s3cmci_request,
+ .set_ios = s3cmci_set_ios,
+ .get_ro = s3cmci_get_ro,
+};
+
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+ /* This is currently here to avoid a number of if (host->pdata)
+ * checks. Any zero fields to ensure reaonable defaults are picked. */
+};
+
+static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
+{
+ struct s3cmci_host *host;
+ struct mmc_host *mmc;
+ int ret;
+
+ mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto probe_out;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->pdev = pdev;
+ host->is2440 = is2440;
+
+ host->pdata = pdev->dev.platform_data;
+ if (!host->pdata) {
+ pdev->dev.platform_data = &s3cmci_def_pdata;
+ host->pdata = &s3cmci_def_pdata;
+ }
+
+ spin_lock_init(&host->complete_lock);
+ tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
+
+ if (is2440) {
+ host->sdiimsk = S3C2440_SDIIMSK;
+ host->sdidata = S3C2440_SDIDATA;
+ host->clk_div = 1;
+ } else {
+ host->sdiimsk = S3C2410_SDIIMSK;
+ host->sdidata = S3C2410_SDIDATA;
+ host->clk_div = 2;
+ }
+
+ host->dodma = 0;
+ host->complete_what = COMPLETION_NONE;
+ host->pio_active = XFER_NONE;
+
+ host->dma = S3CMCI_DMA;
+
+ host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!host->mem) {
+ dev_err(&pdev->dev,
+ "failed to get io memory region resouce.\n");
+
+ ret = -ENOENT;
+ goto probe_free_host;
+ }
+
+ host->mem = request_mem_region(host->mem->start,
+ RESSIZE(host->mem), pdev->name);
+
+ if (!host->mem) {
+ dev_err(&pdev->dev, "failed to request io memory region.\n");
+ ret = -ENOENT;
+ goto probe_free_host;
+ }
+
+ host->base = ioremap(host->mem->start, RESSIZE(host->mem));
+ if (host->base == 0) {
+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+ ret = -EINVAL;
+ goto probe_free_mem_region;
+ }
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq == 0) {
+ dev_err(&pdev->dev, "failed to get interrupt resouce.\n");
+ ret = -EINVAL;
+ goto probe_iounmap;
+ }
+
+ if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
+ dev_err(&pdev->dev, "failed to request mci interrupt.\n");
+ ret = -ENOENT;
+ goto probe_iounmap;
+ }
+
+ /* We get spurious interrupts even when we have set the IMSK
+ * register to ignore everything, so use disable_irq() to make
+ * ensure we don't lock the system with un-serviceable requests. */
+
+ disable_irq(host->irq);
+
+ host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
+
+ if (host->irq_cd >= 0) {
+ if (request_irq(host->irq_cd, s3cmci_irq_cd,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ DRIVER_NAME, host)) {
+ dev_err(&pdev->dev, "can't get card detect irq.\n");
+ ret = -ENOENT;
+ goto probe_free_irq;
+ }
+ } else {
+ dev_warn(&pdev->dev, "host detect has no irq available\n");
+ s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
+ S3C2410_GPIO_INPUT);
+ }
+
+ if (host->pdata->gpio_wprotect)
+ s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
+ S3C2410_GPIO_INPUT);
+
+ if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) {
+ dev_err(&pdev->dev, "unable to get DMA channel.\n");
+ ret = -EBUSY;
+ goto probe_free_irq_cd;
+ }
+
+ host->clk = clk_get(&pdev->dev, "sdi");
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "failed to find clock source.\n");
+ ret = PTR_ERR(host->clk);
+ host->clk = NULL;
+ goto probe_free_host;
+ }
+
+ ret = clk_enable(host->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock source.\n");
+ goto clk_free;
+ }
+
+ host->clk_rate = clk_get_rate(host->clk);
+
+ mmc->ops = &s3cmci_ops;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->f_min = host->clk_rate / (host->clk_div * 256);
+ mmc->f_max = host->clk_rate / host->clk_div;
+
+ if (host->pdata->ocr_avail)
+ mmc->ocr_avail = host->pdata->ocr_avail;
+
+ mmc->max_blk_count = 4095;
+ mmc->max_blk_size = 4095;
+ mmc->max_req_size = 4095 * 512;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ mmc->max_phys_segs = 128;
+ mmc->max_hw_segs = 128;
+
+ dbg(host, dbg_debug,
+ "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n",
+ (host->is2440?"2440":""),
+ host->base, host->irq, host->irq_cd, host->dma);
+
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add mmc host.\n");
+ goto free_dmabuf;
+ }
+
+ platform_set_drvdata(pdev, mmc);
+ dev_info(&pdev->dev, "initialisation done.\n");
+
+ return 0;
+
+ free_dmabuf:
+ clk_disable(host->clk);
+
+ clk_free:
+ clk_put(host->clk);
+
+ probe_free_irq_cd:
+ if (host->irq_cd >= 0)
+ free_irq(host->irq_cd, host);
+
+ probe_free_irq:
+ free_irq(host->irq, host);
+
+ probe_iounmap:
+ iounmap(host->base);
+
+ probe_free_mem_region:
+ release_mem_region(host->mem->start, RESSIZE(host->mem));
+
+ probe_free_host:
+ mmc_free_host(mmc);
+ probe_out:
+ return ret;
+}
+
+static int __devexit s3cmci_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct s3cmci_host *host = mmc_priv(mmc);
+
+ mmc_remove_host(mmc);
+
+ clk_disable(host->clk);
+ clk_put(host->clk);
+
+ tasklet_disable(&host->pio_tasklet);
+ s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
+
+ if (host->irq_cd >= 0)
+ free_irq(host->irq_cd, host);
+ free_irq(host->irq, host);
+
+ iounmap(host->base);
+ release_mem_region(host->mem->start, RESSIZE(host->mem));
+
+ mmc_free_host(mmc);
+ return 0;
+}
+
+static int __devinit s3cmci_probe_2410(struct platform_device *dev)
+{
+ return s3cmci_probe(dev, 0);
+}
+
+static int __devinit s3cmci_probe_2412(struct platform_device *dev)
+{
+ return s3cmci_probe(dev, 1);
+}
+
+static int __devinit s3cmci_probe_2440(struct platform_device *dev)
+{
+ return s3cmci_probe(dev, 1);
+}
+
+#ifdef CONFIG_PM
+
+static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+
+ return mmc_suspend_host(mmc, state);
+}
+
+static int s3cmci_resume(struct platform_device *dev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+
+ return mmc_resume_host(mmc);
+}
+
+#else /* CONFIG_PM */
+#define s3cmci_suspend NULL
+#define s3cmci_resume NULL
+#endif /* CONFIG_PM */
+
+
+static struct platform_driver s3cmci_driver_2410 = {
+ .driver.name = "s3c2410-sdi",
+ .driver.owner = THIS_MODULE,
+ .probe = s3cmci_probe_2410,
+ .remove = __devexit_p(s3cmci_remove),
+ .suspend = s3cmci_suspend,
+ .resume = s3cmci_resume,
+};
+
+static struct platform_driver s3cmci_driver_2412 = {
+ .driver.name = "s3c2412-sdi",
+ .driver.owner = THIS_MODULE,
+ .probe = s3cmci_probe_2412,
+ .remove = __devexit_p(s3cmci_remove),
+ .suspend = s3cmci_suspend,
+ .resume = s3cmci_resume,
+};
+
+static struct platform_driver s3cmci_driver_2440 = {
+ .driver.name = "s3c2440-sdi",
+ .driver.owner = THIS_MODULE,
+ .probe = s3cmci_probe_2440,
+ .remove = __devexit_p(s3cmci_remove),
+ .suspend = s3cmci_suspend,
+ .resume = s3cmci_resume,
+};
+
+
+static int __init s3cmci_init(void)
+{
+ platform_driver_register(&s3cmci_driver_2410);
+ platform_driver_register(&s3cmci_driver_2412);
+ platform_driver_register(&s3cmci_driver_2440);
+ return 0;
+}
+
+static void __exit s3cmci_exit(void)
+{
+ platform_driver_unregister(&s3cmci_driver_2410);
+ platform_driver_unregister(&s3cmci_driver_2412);
+ platform_driver_unregister(&s3cmci_driver_2440);
+}
+
+module_init(s3cmci_init);
+module_exit(s3cmci_exit);
+
+MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>");
+MODULE_ALIAS("platform:s3c2410-sdi");
+MODULE_ALIAS("platform:s3c2412-sdi");
+MODULE_ALIAS("platform:s3c2440-sdi");
diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
new file mode 100644
index 00000000000..37d9c60010c
--- /dev/null
+++ b/drivers/mmc/host/s3cmci.h
@@ -0,0 +1,70 @@
+/*
+ * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ * Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* FIXME: DMA Resource management ?! */
+#define S3CMCI_DMA 0
+
+enum s3cmci_waitfor {
+ COMPLETION_NONE,
+ COMPLETION_FINALIZE,
+ COMPLETION_CMDSENT,
+ COMPLETION_RSPFIN,
+ COMPLETION_XFERFINISH,
+ COMPLETION_XFERFINISH_RSPFIN,
+};
+
+struct s3cmci_host {
+ struct platform_device *pdev;
+ struct s3c24xx_mci_pdata *pdata;
+ struct mmc_host *mmc;
+ struct resource *mem;
+ struct clk *clk;
+ void __iomem *base;
+ int irq;
+ int irq_cd;
+ int dma;
+
+ unsigned long clk_rate;
+ unsigned long clk_div;
+ unsigned long real_rate;
+ u8 prescaler;
+
+ int is2440;
+ unsigned sdiimsk;
+ unsigned sdidata;
+ int dodma;
+ int dmatogo;
+
+ struct mmc_request *mrq;
+ int cmd_is_stop;
+
+ spinlock_t complete_lock;
+ enum s3cmci_waitfor complete_what;
+
+ int dma_complete;
+
+ u32 pio_sgptr;
+ u32 pio_words;
+ u32 pio_count;
+ u32 *pio_ptr;
+#define XFER_NONE 0
+#define XFER_READ 1
+#define XFER_WRITE 2
+ u32 pio_active;
+
+ int bus_width;
+
+ char dbgmsg_cmd[301];
+ char dbgmsg_dat[301];
+ char *status;
+
+ unsigned int ccnt, dcnt;
+ struct tasklet_struct pio_tasklet;
+};
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
new file mode 100644
index 00000000000..deb607c52c0
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -0,0 +1,732 @@
+/* linux/drivers/mmc/host/sdhci-pci.c - SDHCI on PCI bus interface
+ *
+ * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * Thanks to the following companies for their support:
+ *
+ * - JMicron (hardware and technical support)
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#include "sdhci.h"
+
+/*
+ * PCI registers
+ */
+
+#define PCI_SDHCI_IFPIO 0x00
+#define PCI_SDHCI_IFDMA 0x01
+#define PCI_SDHCI_IFVENDOR 0x02
+
+#define PCI_SLOT_INFO 0x40 /* 8 bits */
+#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7)
+#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07
+
+#define MAX_SLOTS 8
+
+struct sdhci_pci_chip;
+struct sdhci_pci_slot;
+
+struct sdhci_pci_fixes {
+ unsigned int quirks;
+
+ int (*probe)(struct sdhci_pci_chip*);
+
+ int (*probe_slot)(struct sdhci_pci_slot*);
+ void (*remove_slot)(struct sdhci_pci_slot*, int);
+
+ int (*suspend)(struct sdhci_pci_chip*,
+ pm_message_t);
+ int (*resume)(struct sdhci_pci_chip*);
+};
+
+struct sdhci_pci_slot {
+ struct sdhci_pci_chip *chip;
+ struct sdhci_host *host;
+
+ int pci_bar;
+};
+
+struct sdhci_pci_chip {
+ struct pci_dev *pdev;
+
+ unsigned int quirks;
+ const struct sdhci_pci_fixes *fixes;
+
+ int num_slots; /* Slots on controller */
+ struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */
+};
+
+
+/*****************************************************************************\
+ * *
+ * Hardware specific quirk handling *
+ * *
+\*****************************************************************************/
+
+static int ricoh_probe(struct sdhci_pci_chip *chip)
+{
+ if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
+ chip->quirks |= SDHCI_QUIRK_CLOCK_BEFORE_RESET;
+
+ if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)
+ chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
+
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_ricoh = {
+ .probe = ricoh_probe,
+ .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR,
+};
+
+static const struct sdhci_pci_fixes sdhci_ene_712 = {
+ .quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_BROKEN_DMA,
+};
+
+static const struct sdhci_pci_fixes sdhci_ene_714 = {
+ .quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+ SDHCI_QUIRK_BROKEN_DMA,
+};
+
+static const struct sdhci_pci_fixes sdhci_cafe = {
+ .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
+};
+
+static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
+{
+ u8 scratch;
+ int ret;
+
+ ret = pci_read_config_byte(chip->pdev, 0xAE, &scratch);
+ if (ret)
+ return ret;
+
+ /*
+ * Turn PMOS on [bit 0], set over current detection to 2.4 V
+ * [bit 1:2] and enable over current debouncing [bit 6].
+ */
+ if (on)
+ scratch |= 0x47;
+ else
+ scratch &= ~0x47;
+
+ ret = pci_write_config_byte(chip->pdev, 0xAE, scratch);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int jmicron_probe(struct sdhci_pci_chip *chip)
+{
+ int ret;
+
+ if (chip->pdev->revision == 0) {
+ chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE |
+ SDHCI_QUIRK_32BIT_ADMA_SIZE |
+ SDHCI_QUIRK_RESET_AFTER_REQUEST;
+ }
+
+ /*
+ * JMicron chips can have two interfaces to the same hardware
+ * in order to work around limitations in Microsoft's driver.
+ * We need to make sure we only bind to one of them.
+ *
+ * This code assumes two things:
+ *
+ * 1. The PCI code adds subfunctions in order.
+ *
+ * 2. The MMC interface has a lower subfunction number
+ * than the SD interface.
+ */
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) {
+ struct pci_dev *sd_dev;
+
+ sd_dev = NULL;
+ while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON,
+ PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) {
+ if ((PCI_SLOT(chip->pdev->devfn) ==
+ PCI_SLOT(sd_dev->devfn)) &&
+ (chip->pdev->bus == sd_dev->bus))
+ break;
+ }
+
+ if (sd_dev) {
+ pci_dev_put(sd_dev);
+ dev_info(&chip->pdev->dev, "Refusing to bind to "
+ "secondary interface.\n");
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * JMicron chips need a bit of a nudge to enable the power
+ * output pins.
+ */
+ ret = jmicron_pmos(chip, 1);
+ if (ret) {
+ dev_err(&chip->pdev->dev, "Failure enabling card power\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void jmicron_enable_mmc(struct sdhci_host *host, int on)
+{
+ u8 scratch;
+
+ scratch = readb(host->ioaddr + 0xC0);
+
+ if (on)
+ scratch |= 0x01;
+ else
+ scratch &= ~0x01;
+
+ writeb(scratch, host->ioaddr + 0xC0);
+}
+
+static int jmicron_probe_slot(struct sdhci_pci_slot *slot)
+{
+ if (slot->chip->pdev->revision == 0) {
+ u16 version;
+
+ version = readl(slot->host->ioaddr + SDHCI_HOST_VERSION);
+ version = (version & SDHCI_VENDOR_VER_MASK) >>
+ SDHCI_VENDOR_VER_SHIFT;
+
+ /*
+ * Older versions of the chip have lots of nasty glitches
+ * in the ADMA engine. It's best just to avoid it
+ * completely.
+ */
+ if (version < 0xAC)
+ slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+ }
+
+ /*
+ * The secondary interface requires a bit set to get the
+ * interrupts.
+ */
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+ jmicron_enable_mmc(slot->host, 1);
+
+ return 0;
+}
+
+static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead)
+{
+ if (dead)
+ return;
+
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+ jmicron_enable_mmc(slot->host, 0);
+}
+
+static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state)
+{
+ int i;
+
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+ for (i = 0;i < chip->num_slots;i++)
+ jmicron_enable_mmc(chip->slots[i]->host, 0);
+ }
+
+ return 0;
+}
+
+static int jmicron_resume(struct sdhci_pci_chip *chip)
+{
+ int ret, i;
+
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+ for (i = 0;i < chip->num_slots;i++)
+ jmicron_enable_mmc(chip->slots[i]->host, 1);
+ }
+
+ ret = jmicron_pmos(chip, 1);
+ if (ret) {
+ dev_err(&chip->pdev->dev, "Failure enabling card power\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_jmicron = {
+ .probe = jmicron_probe,
+
+ .probe_slot = jmicron_probe_slot,
+ .remove_slot = jmicron_remove_slot,
+
+ .suspend = jmicron_suspend,
+ .resume = jmicron_resume,
+};
+
+static const struct pci_device_id pci_ids[] __devinitdata = {
+ {
+ .vendor = PCI_VENDOR_ID_RICOH,
+ .device = PCI_DEVICE_ID_RICOH_R5C822,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ricoh,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB712_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ene_712,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB712_SD_2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ene_712,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB714_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ene_714,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB714_SD_2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ene_714,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = PCI_DEVICE_ID_MARVELL_CAFE_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_cafe,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_jmicron,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB38X_MMC,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_jmicron,
+ },
+
+ { /* Generic SD host controller */
+ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
+ },
+
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/*****************************************************************************\
+ * *
+ * SDHCI core callbacks *
+ * *
+\*****************************************************************************/
+
+static int sdhci_pci_enable_dma(struct sdhci_host *host)
+{
+ struct sdhci_pci_slot *slot;
+ struct pci_dev *pdev;
+ int ret;
+
+ slot = sdhci_priv(host);
+ pdev = slot->chip->pdev;
+
+ if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
+ ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
+ (host->flags & SDHCI_USE_DMA)) {
+ dev_warn(&pdev->dev, "Will use DMA mode even though HW "
+ "doesn't fully claim to support it.\n");
+ }
+
+ ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ return 0;
+}
+
+static struct sdhci_ops sdhci_pci_ops = {
+ .enable_dma = sdhci_pci_enable_dma,
+};
+
+/*****************************************************************************\
+ * *
+ * Suspend/resume *
+ * *
+\*****************************************************************************/
+
+#ifdef CONFIG_PM
+
+static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct sdhci_pci_chip *chip;
+ struct sdhci_pci_slot *slot;
+ int i, ret;
+
+ chip = pci_get_drvdata(pdev);
+ if (!chip)
+ return 0;
+
+ for (i = 0;i < chip->num_slots;i++) {
+ slot = chip->slots[i];
+ if (!slot)
+ continue;
+
+ ret = sdhci_suspend_host(slot->host, state);
+
+ if (ret) {
+ for (i--;i >= 0;i--)
+ sdhci_resume_host(chip->slots[i]->host);
+ return ret;
+ }
+ }
+
+ if (chip->fixes && chip->fixes->suspend) {
+ ret = chip->fixes->suspend(chip, state);
+ if (ret) {
+ for (i = chip->num_slots - 1;i >= 0;i--)
+ sdhci_resume_host(chip->slots[i]->host);
+ return ret;
+ }
+ }
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int sdhci_pci_resume (struct pci_dev *pdev)
+{
+ struct sdhci_pci_chip *chip;
+ struct sdhci_pci_slot *slot;
+ int i, ret;
+
+ chip = pci_get_drvdata(pdev);
+ if (!chip)
+ return 0;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ if (chip->fixes && chip->fixes->resume) {
+ ret = chip->fixes->resume(chip);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0;i < chip->num_slots;i++) {
+ slot = chip->slots[i];
+ if (!slot)
+ continue;
+
+ ret = sdhci_resume_host(slot->host);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+#else /* CONFIG_PM */
+
+#define sdhci_pci_suspend NULL
+#define sdhci_pci_resume NULL
+
+#endif /* CONFIG_PM */
+
+/*****************************************************************************\
+ * *
+ * Device probing/removal *
+ * *
+\*****************************************************************************/
+
+static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
+ struct pci_dev *pdev, struct sdhci_pci_chip *chip, int bar)
+{
+ struct sdhci_pci_slot *slot;
+ struct sdhci_host *host;
+
+ resource_size_t addr;
+
+ int ret;
+
+ if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
+ dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar);
+ return ERR_PTR(-ENODEV);
+ }
+
+ if (pci_resource_len(pdev, bar) != 0x100) {
+ dev_err(&pdev->dev, "Invalid iomem size. You may "
+ "experience problems.\n");
+ }
+
+ if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
+ dev_err(&pdev->dev, "Vendor specific interface. Aborting.\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
+ dev_err(&pdev->dev, "Unknown interface. Aborting.\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ goto unmap;
+ }
+
+ slot = sdhci_priv(host);
+
+ slot->chip = chip;
+ slot->host = host;
+ slot->pci_bar = bar;
+
+ host->hw_name = "PCI";
+ host->ops = &sdhci_pci_ops;
+ host->quirks = chip->quirks;
+
+ host->irq = pdev->irq;
+
+ ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
+ if (ret) {
+ dev_err(&pdev->dev, "cannot request region\n");
+ return ERR_PTR(ret);
+ }
+
+ addr = pci_resource_start(pdev, bar);
+ host->ioaddr = ioremap_nocache(addr, pci_resource_len(pdev, bar));
+ if (!host->ioaddr) {
+ dev_err(&pdev->dev, "failed to remap registers\n");
+ goto release;
+ }
+
+ if (chip->fixes && chip->fixes->probe_slot) {
+ ret = chip->fixes->probe_slot(slot);
+ if (ret)
+ goto unmap;
+ }
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto remove;
+
+ return slot;
+
+remove:
+ if (chip->fixes && chip->fixes->remove_slot)
+ chip->fixes->remove_slot(slot, 0);
+
+unmap:
+ iounmap(host->ioaddr);
+
+release:
+ pci_release_region(pdev, bar);
+ sdhci_free_host(host);
+
+ return ERR_PTR(ret);
+}
+
+static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot)
+{
+ int dead;
+ u32 scratch;
+
+ dead = 0;
+ scratch = readl(slot->host->ioaddr + SDHCI_INT_STATUS);
+ if (scratch == (u32)-1)
+ dead = 1;
+
+ sdhci_remove_host(slot->host, dead);
+
+ if (slot->chip->fixes && slot->chip->fixes->remove_slot)
+ slot->chip->fixes->remove_slot(slot, dead);
+
+ pci_release_region(slot->chip->pdev, slot->pci_bar);
+
+ sdhci_free_host(slot->host);
+}
+
+static int __devinit sdhci_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct sdhci_pci_chip *chip;
+ struct sdhci_pci_slot *slot;
+
+ u8 slots, rev, first_bar;
+ int ret, i;
+
+ BUG_ON(pdev == NULL);
+ BUG_ON(ent == NULL);
+
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
+
+ dev_info(&pdev->dev, "SDHCI controller found [%04x:%04x] (rev %x)\n",
+ (int)pdev->vendor, (int)pdev->device, (int)rev);
+
+ ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
+ if (ret)
+ return ret;
+
+ slots = PCI_SLOT_INFO_SLOTS(slots) + 1;
+ dev_dbg(&pdev->dev, "found %d slot(s)\n", slots);
+ if (slots == 0)
+ return -ENODEV;
+
+ BUG_ON(slots > MAX_SLOTS);
+
+ ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar);
+ if (ret)
+ return ret;
+
+ first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK;
+
+ if (first_bar > 5) {
+ dev_err(&pdev->dev, "Invalid first BAR. Aborting.\n");
+ return -ENODEV;
+ }
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ chip = kzalloc(sizeof(struct sdhci_pci_chip), GFP_KERNEL);
+ if (!chip) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ chip->pdev = pdev;
+ chip->fixes = (const struct sdhci_pci_fixes*)ent->driver_data;
+ if (chip->fixes)
+ chip->quirks = chip->fixes->quirks;
+ chip->num_slots = slots;
+
+ pci_set_drvdata(pdev, chip);
+
+ if (chip->fixes && chip->fixes->probe) {
+ ret = chip->fixes->probe(chip);
+ if (ret)
+ goto free;
+ }
+
+ for (i = 0;i < slots;i++) {
+ slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i);
+ if (IS_ERR(slot)) {
+ for (i--;i >= 0;i--)
+ sdhci_pci_remove_slot(chip->slots[i]);
+ ret = PTR_ERR(slot);
+ goto free;
+ }
+
+ chip->slots[i] = slot;
+ }
+
+ return 0;
+
+free:
+ pci_set_drvdata(pdev, NULL);
+ kfree(chip);
+
+err:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void __devexit sdhci_pci_remove(struct pci_dev *pdev)
+{
+ int i;
+ struct sdhci_pci_chip *chip;
+
+ chip = pci_get_drvdata(pdev);
+
+ if (chip) {
+ for (i = 0;i < chip->num_slots; i++)
+ sdhci_pci_remove_slot(chip->slots[i]);
+
+ pci_set_drvdata(pdev, NULL);
+ kfree(chip);
+ }
+
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver sdhci_driver = {
+ .name = "sdhci-pci",
+ .id_table = pci_ids,
+ .probe = sdhci_pci_probe,
+ .remove = __devexit_p(sdhci_pci_remove),
+ .suspend = sdhci_pci_suspend,
+ .resume = sdhci_pci_resume,
+};
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+ return pci_register_driver(&sdhci_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+ pci_unregister_driver(&sdhci_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index b413aa6c246..17701c3da73 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -15,7 +15,7 @@
#include <linux/delay.h>
#include <linux/highmem.h>
-#include <linux/pci.h>
+#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
@@ -32,135 +32,6 @@
static unsigned int debug_quirks = 0;
-/*
- * Different quirks to handle when the hardware deviates from a strict
- * interpretation of the SDHCI specification.
- */
-
-/* Controller doesn't honor resets unless we touch the clock register */
-#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
-/* Controller has bad caps bits, but really supports DMA */
-#define SDHCI_QUIRK_FORCE_DMA (1<<1)
-/* Controller doesn't like to be reset when there is no card inserted. */
-#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
-/* Controller doesn't like clearing the power reg before a change */
-#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
-/* Controller has flaky internal state so reset it on each ios change */
-#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
-/* Controller has an unusable DMA engine */
-#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
-/* Controller can only DMA from 32-bit aligned addresses */
-#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6)
-/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7)
-/* Controller needs to be reset after each request to stay stable */
-#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8)
-/* Controller needs voltage and power writes to happen separately */
-#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9)
-/* Controller has an off-by-one issue with timeout value */
-#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10)
-
-static const struct pci_device_id pci_ids[] __devinitdata = {
- {
- .vendor = PCI_VENDOR_ID_RICOH,
- .device = PCI_DEVICE_ID_RICOH_R5C822,
- .subvendor = PCI_VENDOR_ID_IBM,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET |
- SDHCI_QUIRK_FORCE_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_RICOH,
- .device = PCI_DEVICE_ID_RICOH_R5C822,
- .subvendor = PCI_VENDOR_ID_SAMSUNG,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_FORCE_DMA |
- SDHCI_QUIRK_NO_CARD_NO_RESET,
- },
-
- {
- .vendor = PCI_VENDOR_ID_RICOH,
- .device = PCI_DEVICE_ID_RICOH_R5C822,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_FORCE_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_TI,
- .device = PCI_DEVICE_ID_TI_XX21_XX11_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_FORCE_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB712_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_BROKEN_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB712_SD_2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_BROKEN_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB714_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
- SDHCI_QUIRK_BROKEN_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB714_SD_2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
- SDHCI_QUIRK_BROKEN_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_MARVELL,
- .device = PCI_DEVICE_ID_MARVELL_CAFE_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
- SDHCI_QUIRK_INCR_TIMEOUT_CONTROL,
- },
-
- {
- .vendor = PCI_VENDOR_ID_JMICRON,
- .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR |
- SDHCI_QUIRK_32BIT_DMA_SIZE |
- SDHCI_QUIRK_RESET_AFTER_REQUEST,
- },
-
- { /* Generic SD host controller */
- PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
- },
-
- { /* end: all zeroes */ },
-};
-
-MODULE_DEVICE_TABLE(pci, pci_ids);
-
static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
static void sdhci_finish_data(struct sdhci_host *);
@@ -215,7 +86,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
unsigned long timeout;
- if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
+ if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT))
return;
@@ -253,7 +124,8 @@ static void sdhci_init(struct sdhci_host *host)
SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
- SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
+ SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE |
+ SDHCI_INT_ADMA_ERROR;
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
@@ -443,23 +315,226 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
DBG("PIO transfer complete.\n");
}
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
{
- u8 count;
- unsigned target_timeout, current_timeout;
+ local_irq_save(*flags);
+ return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+}
- WARN_ON(host->data);
+static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
+{
+ kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
+ local_irq_restore(*flags);
+}
- if (data == NULL)
- return;
+static int sdhci_adma_table_pre(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
- /* Sanity checks */
- BUG_ON(data->blksz * data->blocks > 524288);
- BUG_ON(data->blksz > host->mmc->max_blk_size);
- BUG_ON(data->blocks > 65535);
+ u8 *desc;
+ u8 *align;
+ dma_addr_t addr;
+ dma_addr_t align_addr;
+ int len, offset;
- host->data = data;
- host->data_early = 0;
+ struct scatterlist *sg;
+ int i;
+ char *buffer;
+ unsigned long flags;
+
+ /*
+ * The spec does not specify endianness of descriptor table.
+ * We currently guess that it is LE.
+ */
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ /*
+ * The ADMA descriptor table is mapped further down as we
+ * need to fill it with data first.
+ */
+
+ host->align_addr = dma_map_single(mmc_dev(host->mmc),
+ host->align_buffer, 128 * 4, direction);
+ if (dma_mapping_error(host->align_addr))
+ goto fail;
+ BUG_ON(host->align_addr & 0x3);
+
+ host->sg_count = dma_map_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len, direction);
+ if (host->sg_count == 0)
+ goto unmap_align;
+
+ desc = host->adma_desc;
+ align = host->align_buffer;
+
+ align_addr = host->align_addr;
+
+ for_each_sg(data->sg, sg, host->sg_count, i) {
+ addr = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+
+ /*
+ * The SDHCI specification states that ADMA
+ * addresses must be 32-bit aligned. If they
+ * aren't, then we use a bounce buffer for
+ * the (up to three) bytes that screw up the
+ * alignment.
+ */
+ offset = (4 - (addr & 0x3)) & 0x3;
+ if (offset) {
+ if (data->flags & MMC_DATA_WRITE) {
+ buffer = sdhci_kmap_atomic(sg, &flags);
+ memcpy(align, buffer, offset);
+ sdhci_kunmap_atomic(buffer, &flags);
+ }
+
+ desc[7] = (align_addr >> 24) & 0xff;
+ desc[6] = (align_addr >> 16) & 0xff;
+ desc[5] = (align_addr >> 8) & 0xff;
+ desc[4] = (align_addr >> 0) & 0xff;
+
+ BUG_ON(offset > 65536);
+
+ desc[3] = (offset >> 8) & 0xff;
+ desc[2] = (offset >> 0) & 0xff;
+
+ desc[1] = 0x00;
+ desc[0] = 0x21; /* tran, valid */
+
+ align += 4;
+ align_addr += 4;
+
+ desc += 8;
+
+ addr += offset;
+ len -= offset;
+ }
+
+ desc[7] = (addr >> 24) & 0xff;
+ desc[6] = (addr >> 16) & 0xff;
+ desc[5] = (addr >> 8) & 0xff;
+ desc[4] = (addr >> 0) & 0xff;
+
+ BUG_ON(len > 65536);
+
+ desc[3] = (len >> 8) & 0xff;
+ desc[2] = (len >> 0) & 0xff;
+
+ desc[1] = 0x00;
+ desc[0] = 0x21; /* tran, valid */
+
+ desc += 8;
+
+ /*
+ * If this triggers then we have a calculation bug
+ * somewhere. :/
+ */
+ WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
+ }
+
+ /*
+ * Add a terminating entry.
+ */
+ desc[7] = 0;
+ desc[6] = 0;
+ desc[5] = 0;
+ desc[4] = 0;
+
+ desc[3] = 0;
+ desc[2] = 0;
+
+ desc[1] = 0x00;
+ desc[0] = 0x03; /* nop, end, valid */
+
+ /*
+ * Resync align buffer as we might have changed it.
+ */
+ if (data->flags & MMC_DATA_WRITE) {
+ dma_sync_single_for_device(mmc_dev(host->mmc),
+ host->align_addr, 128 * 4, direction);
+ }
+
+ host->adma_addr = dma_map_single(mmc_dev(host->mmc),
+ host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
+ if (dma_mapping_error(host->align_addr))
+ goto unmap_entries;
+ BUG_ON(host->adma_addr & 0x3);
+
+ return 0;
+
+unmap_entries:
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+unmap_align:
+ dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+ 128 * 4, direction);
+fail:
+ return -EINVAL;
+}
+
+static void sdhci_adma_table_post(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
+
+ struct scatterlist *sg;
+ int i, size;
+ u8 *align;
+ char *buffer;
+ unsigned long flags;
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
+ (128 * 2 + 1) * 4, DMA_TO_DEVICE);
+
+ dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+ 128 * 4, direction);
+
+ if (data->flags & MMC_DATA_READ) {
+ dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+
+ align = host->align_buffer;
+
+ for_each_sg(data->sg, sg, host->sg_count, i) {
+ if (sg_dma_address(sg) & 0x3) {
+ size = 4 - (sg_dma_address(sg) & 0x3);
+
+ buffer = sdhci_kmap_atomic(sg, &flags);
+ memcpy(buffer, align, size);
+ sdhci_kunmap_atomic(buffer, &flags);
+
+ align += 4;
+ }
+ }
+ }
+
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+}
+
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
+{
+ u8 count;
+ unsigned target_timeout, current_timeout;
+
+ /*
+ * If the host controller provides us with an incorrect timeout
+ * value, just skip the check and use 0xE. The hardware may take
+ * longer to time out, but that's much better than having a too-short
+ * timeout value.
+ */
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL))
+ return 0xE;
/* timeout in us */
target_timeout = data->timeout_ns / 1000 +
@@ -484,52 +559,158 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
break;
}
- /*
- * Compensate for an off-by-one error in the CaFe hardware; otherwise,
- * a too-small count gives us interrupt timeouts.
- */
- if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL))
- count++;
-
if (count >= 0xF) {
printk(KERN_WARNING "%s: Too large timeout requested!\n",
mmc_hostname(host->mmc));
count = 0xE;
}
+ return count;
+}
+
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+{
+ u8 count;
+ u8 ctrl;
+ int ret;
+
+ WARN_ON(host->data);
+
+ if (data == NULL)
+ return;
+
+ /* Sanity checks */
+ BUG_ON(data->blksz * data->blocks > 524288);
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
+ BUG_ON(data->blocks > 65535);
+
+ host->data = data;
+ host->data_early = 0;
+
+ count = sdhci_calc_timeout(host, data);
writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
if (host->flags & SDHCI_USE_DMA)
host->flags |= SDHCI_REQ_USE_DMA;
- if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
- (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) &&
- ((data->blksz * data->blocks) & 0x3))) {
- DBG("Reverting to PIO because of transfer size (%d)\n",
- data->blksz * data->blocks);
- host->flags &= ~SDHCI_REQ_USE_DMA;
+ /*
+ * FIXME: This doesn't account for merging when mapping the
+ * scatterlist.
+ */
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ int broken, i;
+ struct scatterlist *sg;
+
+ broken = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+ broken = 1;
+ } else {
+ if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
+ broken = 1;
+ }
+
+ if (unlikely(broken)) {
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->length & 0x3) {
+ DBG("Reverting to PIO because of "
+ "transfer size (%d)\n",
+ sg->length);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ break;
+ }
+ }
+ }
}
/*
* The assumption here being that alignment is the same after
* translation to device address space.
*/
- if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
- (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
- (data->sg->offset & 0x3))) {
- DBG("Reverting to PIO because of bad alignment\n");
- host->flags &= ~SDHCI_REQ_USE_DMA;
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ int broken, i;
+ struct scatterlist *sg;
+
+ broken = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ /*
+ * As we use 3 byte chunks to work around
+ * alignment problems, we need to check this
+ * quirk.
+ */
+ if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+ broken = 1;
+ } else {
+ if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
+ broken = 1;
+ }
+
+ if (unlikely(broken)) {
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->offset & 0x3) {
+ DBG("Reverting to PIO because of "
+ "bad alignment\n");
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ break;
+ }
+ }
+ }
}
if (host->flags & SDHCI_REQ_USE_DMA) {
- int count;
+ if (host->flags & SDHCI_USE_ADMA) {
+ ret = sdhci_adma_table_pre(host, data);
+ if (ret) {
+ /*
+ * This only happens when someone fed
+ * us an invalid request.
+ */
+ WARN_ON(1);
+ host->flags &= ~SDHCI_USE_DMA;
+ } else {
+ writel(host->adma_addr,
+ host->ioaddr + SDHCI_ADMA_ADDRESS);
+ }
+ } else {
+ int sg_cnt;
+
+ sg_cnt = dma_map_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len,
+ (data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE :
+ DMA_TO_DEVICE);
+ if (sg_cnt == 0) {
+ /*
+ * This only happens when someone fed
+ * us an invalid request.
+ */
+ WARN_ON(1);
+ host->flags &= ~SDHCI_USE_DMA;
+ } else {
+ WARN_ON(count != 1);
+ writel(sg_dma_address(data->sg),
+ host->ioaddr + SDHCI_DMA_ADDRESS);
+ }
+ }
+ }
- count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len,
- (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
- BUG_ON(count != 1);
+ /*
+ * Always adjust the DMA selection as some controllers
+ * (e.g. JMicron) can't do PIO properly when the selection
+ * is ADMA.
+ */
+ if (host->version >= SDHCI_SPEC_200) {
+ ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ (host->flags & SDHCI_USE_ADMA))
+ ctrl |= SDHCI_CTRL_ADMA32;
+ else
+ ctrl |= SDHCI_CTRL_SDMA;
+ writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+ }
- writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS);
- } else {
+ if (!(host->flags & SDHCI_REQ_USE_DMA)) {
host->cur_sg = data->sg;
host->num_sg = data->sg_len;
@@ -567,7 +748,6 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
- u16 blocks;
BUG_ON(!host->data);
@@ -575,25 +755,26 @@ static void sdhci_finish_data(struct sdhci_host *host)
host->data = NULL;
if (host->flags & SDHCI_REQ_USE_DMA) {
- pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
- (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
+ if (host->flags & SDHCI_USE_ADMA)
+ sdhci_adma_table_post(host, data);
+ else {
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, (data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ }
}
/*
- * Controller doesn't count down when in single block mode.
+ * The specification states that the block count register must
+ * be updated, but it does not specify at what point in the
+ * data flow. That makes the register entirely useless to read
+ * back so we have to assume that nothing made it to the card
+ * in the event of an error.
*/
- if (data->blocks == 1)
- blocks = (data->error == 0) ? 0 : 1;
+ if (data->error)
+ data->bytes_xfered = 0;
else
- blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT);
- data->bytes_xfered = data->blksz * (data->blocks - blocks);
-
- if (!data->error && blocks) {
- printk(KERN_ERR "%s: Controller signalled completion even "
- "though there were blocks left.\n",
- mmc_hostname(host->mmc));
- data->error = -EIO;
- }
+ data->bytes_xfered = data->blksz * data->blocks;
if (data->stop) {
/*
@@ -775,7 +956,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
* Spec says that we should clear the power reg before setting
* a new value. Some controllers don't seem to like this though.
*/
- if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
pwr = SDHCI_POWER_ON;
@@ -797,10 +978,10 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
}
/*
- * At least the CaFe chip gets confused if we set the voltage
+ * At least the Marvell CaFe chip gets confused if we set the voltage
* and set turn on power at the same time, so set the voltage first.
*/
- if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+ if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
writeb(pwr & ~SDHCI_POWER_ON,
host->ioaddr + SDHCI_POWER_CONTROL);
@@ -833,7 +1014,8 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = mrq;
- if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+ if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
+ || (host->flags & SDHCI_DEVICE_DEAD)) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
} else
@@ -853,6 +1035,9 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_lock_irqsave(&host->lock, flags);
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ goto out;
+
/*
* Reset the chip on each power off.
* Should clear out any weird states.
@@ -888,9 +1073,10 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
* signalling timeout and CRC errors even on CMD0. Resetting
* it on each ios seems to solve the problem.
*/
- if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
+ if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+out:
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
}
@@ -905,7 +1091,10 @@ static int sdhci_get_ro(struct mmc_host *mmc)
spin_lock_irqsave(&host->lock, flags);
- present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ present = 0;
+ else
+ present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
spin_unlock_irqrestore(&host->lock, flags);
@@ -922,6 +1111,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
spin_lock_irqsave(&host->lock, flags);
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ goto out;
+
ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
ier &= ~SDHCI_INT_CARD_INT;
@@ -931,6 +1123,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+out:
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
@@ -996,13 +1189,14 @@ static void sdhci_tasklet_finish(unsigned long param)
* The controller needs a reset of internal state machines
* upon error conditions.
*/
- if (mrq->cmd->error ||
- (mrq->data && (mrq->data->error ||
- (mrq->data->stop && mrq->data->stop->error))) ||
- (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) {
+ if (!(host->flags & SDHCI_DEVICE_DEAD) &&
+ (mrq->cmd->error ||
+ (mrq->data && (mrq->data->error ||
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
/* Some controllers need this kick or reset won't work here */
- if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
+ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
unsigned int clock;
/* This is to force an update */
@@ -1116,6 +1310,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
host->data->error = -ETIMEDOUT;
else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
host->data->error = -EILSEQ;
+ else if (intmask & SDHCI_INT_ADMA_ERROR)
+ host->data->error = -EIO;
if (host->data->error)
sdhci_finish_data(host);
@@ -1234,218 +1430,167 @@ out:
#ifdef CONFIG_PM
-static int sdhci_suspend (struct pci_dev *pdev, pm_message_t state)
+int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
{
- struct sdhci_chip *chip;
- int i, ret;
-
- chip = pci_get_drvdata(pdev);
- if (!chip)
- return 0;
-
- DBG("Suspending...\n");
-
- for (i = 0;i < chip->num_slots;i++) {
- if (!chip->hosts[i])
- continue;
- ret = mmc_suspend_host(chip->hosts[i]->mmc, state);
- if (ret) {
- for (i--;i >= 0;i--)
- mmc_resume_host(chip->hosts[i]->mmc);
- return ret;
- }
- }
-
- pci_save_state(pdev);
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+ int ret;
- for (i = 0;i < chip->num_slots;i++) {
- if (!chip->hosts[i])
- continue;
- free_irq(chip->hosts[i]->irq, chip->hosts[i]);
- }
+ ret = mmc_suspend_host(host->mmc, state);
+ if (ret)
+ return ret;
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ free_irq(host->irq, host);
return 0;
}
-static int sdhci_resume (struct pci_dev *pdev)
-{
- struct sdhci_chip *chip;
- int i, ret;
+EXPORT_SYMBOL_GPL(sdhci_suspend_host);
- chip = pci_get_drvdata(pdev);
- if (!chip)
- return 0;
+int sdhci_resume_host(struct sdhci_host *host)
+{
+ int ret;
- DBG("Resuming...\n");
+ if (host->flags & SDHCI_USE_DMA) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- ret = pci_enable_device(pdev);
+ ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
+ mmc_hostname(host->mmc), host);
if (ret)
return ret;
- for (i = 0;i < chip->num_slots;i++) {
- if (!chip->hosts[i])
- continue;
- if (chip->hosts[i]->flags & SDHCI_USE_DMA)
- pci_set_master(pdev);
- ret = request_irq(chip->hosts[i]->irq, sdhci_irq,
- IRQF_SHARED, mmc_hostname(chip->hosts[i]->mmc),
- chip->hosts[i]);
- if (ret)
- return ret;
- sdhci_init(chip->hosts[i]);
- mmiowb();
- ret = mmc_resume_host(chip->hosts[i]->mmc);
- if (ret)
- return ret;
- }
+ sdhci_init(host);
+ mmiowb();
+
+ ret = mmc_resume_host(host->mmc);
+ if (ret)
+ return ret;
return 0;
}
-#else /* CONFIG_PM */
-
-#define sdhci_suspend NULL
-#define sdhci_resume NULL
+EXPORT_SYMBOL_GPL(sdhci_resume_host);
#endif /* CONFIG_PM */
/*****************************************************************************\
* *
- * Device probing/removal *
+ * Device allocation/registration *
* *
\*****************************************************************************/
-static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
+struct sdhci_host *sdhci_alloc_host(struct device *dev,
+ size_t priv_size)
{
- int ret;
- unsigned int version;
- struct sdhci_chip *chip;
struct mmc_host *mmc;
struct sdhci_host *host;
- u8 first_bar;
- unsigned int caps;
-
- chip = pci_get_drvdata(pdev);
- BUG_ON(!chip);
-
- ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar);
- if (ret)
- return ret;
-
- first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK;
-
- if (first_bar > 5) {
- printk(KERN_ERR DRIVER_NAME ": Invalid first BAR. Aborting.\n");
- return -ENODEV;
- }
-
- if (!(pci_resource_flags(pdev, first_bar + slot) & IORESOURCE_MEM)) {
- printk(KERN_ERR DRIVER_NAME ": BAR is not iomem. Aborting.\n");
- return -ENODEV;
- }
-
- if (pci_resource_len(pdev, first_bar + slot) != 0x100) {
- printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. "
- "You may experience problems.\n");
- }
-
- if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
- printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n");
- return -ENODEV;
- }
-
- if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
- printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n");
- return -ENODEV;
- }
+ WARN_ON(dev == NULL);
- mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev);
+ mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
if (!mmc)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
host = mmc_priv(mmc);
host->mmc = mmc;
- host->chip = chip;
- chip->hosts[slot] = host;
+ return host;
+}
- host->bar = first_bar + slot;
+EXPORT_SYMBOL_GPL(sdhci_alloc_host);
- host->addr = pci_resource_start(pdev, host->bar);
- host->irq = pdev->irq;
+int sdhci_add_host(struct sdhci_host *host)
+{
+ struct mmc_host *mmc;
+ unsigned int caps;
+ int ret;
- DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq);
+ WARN_ON(host == NULL);
+ if (host == NULL)
+ return -EINVAL;
- ret = pci_request_region(pdev, host->bar, mmc_hostname(mmc));
- if (ret)
- goto free;
+ mmc = host->mmc;
- host->ioaddr = ioremap_nocache(host->addr,
- pci_resource_len(pdev, host->bar));
- if (!host->ioaddr) {
- ret = -ENOMEM;
- goto release;
- }
+ if (debug_quirks)
+ host->quirks = debug_quirks;
sdhci_reset(host, SDHCI_RESET_ALL);
- version = readw(host->ioaddr + SDHCI_HOST_VERSION);
- version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
- if (version > 1) {
+ host->version = readw(host->ioaddr + SDHCI_HOST_VERSION);
+ host->version = (host->version & SDHCI_SPEC_VER_MASK)
+ >> SDHCI_SPEC_VER_SHIFT;
+ if (host->version > SDHCI_SPEC_200) {
printk(KERN_ERR "%s: Unknown controller version (%d). "
"You may experience problems.\n", mmc_hostname(mmc),
- version);
+ host->version);
}
caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
- if (chip->quirks & SDHCI_QUIRK_FORCE_DMA)
+ if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_DMA;
else if (!(caps & SDHCI_CAN_DO_DMA))
DBG("Controller doesn't have DMA capability\n");
else
host->flags |= SDHCI_USE_DMA;
- if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
(host->flags & SDHCI_USE_DMA)) {
DBG("Disabling DMA as it is marked broken\n");
host->flags &= ~SDHCI_USE_DMA;
}
- if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
- (host->flags & SDHCI_USE_DMA)) {
- printk(KERN_WARNING "%s: Will use DMA "
- "mode even though HW doesn't fully "
- "claim to support it.\n", mmc_hostname(mmc));
+ if (host->flags & SDHCI_USE_DMA) {
+ if ((host->version >= SDHCI_SPEC_200) &&
+ (caps & SDHCI_CAN_DO_ADMA2))
+ host->flags |= SDHCI_USE_ADMA;
+ }
+
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
+ (host->flags & SDHCI_USE_ADMA)) {
+ DBG("Disabling ADMA as it is marked broken\n");
+ host->flags &= ~SDHCI_USE_ADMA;
}
if (host->flags & SDHCI_USE_DMA) {
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
- printk(KERN_WARNING "%s: No suitable DMA available. "
- "Falling back to PIO.\n", mmc_hostname(mmc));
- host->flags &= ~SDHCI_USE_DMA;
+ if (host->ops->enable_dma) {
+ if (host->ops->enable_dma(host)) {
+ printk(KERN_WARNING "%s: No suitable DMA "
+ "available. Falling back to PIO.\n",
+ mmc_hostname(mmc));
+ host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA);
+ }
}
}
- if (host->flags & SDHCI_USE_DMA)
- pci_set_master(pdev);
- else /* XXX: Hack to get MMC layer to avoid highmem */
- pdev->dma_mask = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ /*
+ * We need to allocate descriptors for all sg entries
+ * (128) and potentially one alignment transfer for
+ * each of those entries.
+ */
+ host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
+ host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
+ if (!host->adma_desc || !host->align_buffer) {
+ kfree(host->adma_desc);
+ kfree(host->align_buffer);
+ printk(KERN_WARNING "%s: Unable to allocate ADMA "
+ "buffers. Falling back to standard DMA.\n",
+ mmc_hostname(mmc));
+ host->flags &= ~SDHCI_USE_ADMA;
+ }
+ }
+
+ /* XXX: Hack to get MMC layer to avoid highmem */
+ if (!(host->flags & SDHCI_USE_DMA))
+ mmc_dev(host->mmc)->dma_mask = NULL;
host->max_clk =
(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
if (host->max_clk == 0) {
printk(KERN_ERR "%s: Hardware doesn't specify base clock "
"frequency.\n", mmc_hostname(mmc));
- ret = -ENODEV;
- goto unmap;
+ return -ENODEV;
}
host->max_clk *= 1000000;
@@ -1454,8 +1599,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
if (host->timeout_clk == 0) {
printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
"frequency.\n", mmc_hostname(mmc));
- ret = -ENODEV;
- goto unmap;
+ return -ENODEV;
}
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
@@ -1466,7 +1610,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
mmc->ops = &sdhci_ops;
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
@@ -1482,20 +1626,22 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
if (mmc->ocr_avail == 0) {
printk(KERN_ERR "%s: Hardware doesn't report any "
"support voltages.\n", mmc_hostname(mmc));
- ret = -ENODEV;
- goto unmap;
+ return -ENODEV;
}
spin_lock_init(&host->lock);
/*
- * Maximum number of segments. Hardware cannot do scatter lists.
+ * Maximum number of segments. Depends on if the hardware
+ * can do scatter/gather or not.
*/
- if (host->flags & SDHCI_USE_DMA)
+ if (host->flags & SDHCI_USE_ADMA)
+ mmc->max_hw_segs = 128;
+ else if (host->flags & SDHCI_USE_DMA)
mmc->max_hw_segs = 1;
- else
- mmc->max_hw_segs = 16;
- mmc->max_phys_segs = 16;
+ else /* PIO */
+ mmc->max_hw_segs = 128;
+ mmc->max_phys_segs = 128;
/*
* Maximum number of sectors in one transfer. Limited by DMA boundary
@@ -1505,9 +1651,13 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
/*
* Maximum segment size. Could be one segment with the maximum number
- * of bytes.
+ * of bytes. When doing hardware scatter/gather, each entry cannot
+ * be larger than 64 KiB though.
*/
- mmc->max_seg_size = mmc->max_req_size;
+ if (host->flags & SDHCI_USE_ADMA)
+ mmc->max_seg_size = 65536;
+ else
+ mmc->max_seg_size = mmc->max_req_size;
/*
* Maximum block size. This varies from controller to controller and
@@ -1553,7 +1703,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
host->led.default_trigger = mmc_hostname(mmc);
host->led.brightness_set = sdhci_led_control;
- ret = led_classdev_register(&pdev->dev, &host->led);
+ ret = led_classdev_register(mmc_dev(mmc), &host->led);
if (ret)
goto reset;
#endif
@@ -1562,8 +1712,9 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
mmc_add_host(mmc);
- printk(KERN_INFO "%s: SDHCI at 0x%08lx irq %d %s\n",
- mmc_hostname(mmc), host->addr, host->irq,
+ printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
+ mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id,
+ (host->flags & SDHCI_USE_ADMA)?"A":"",
(host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
return 0;
@@ -1576,35 +1727,40 @@ reset:
untasklet:
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
-unmap:
- iounmap(host->ioaddr);
-release:
- pci_release_region(pdev, host->bar);
-free:
- mmc_free_host(mmc);
return ret;
}
-static void sdhci_remove_slot(struct pci_dev *pdev, int slot)
+EXPORT_SYMBOL_GPL(sdhci_add_host);
+
+void sdhci_remove_host(struct sdhci_host *host, int dead)
{
- struct sdhci_chip *chip;
- struct mmc_host *mmc;
- struct sdhci_host *host;
+ unsigned long flags;
- chip = pci_get_drvdata(pdev);
- host = chip->hosts[slot];
- mmc = host->mmc;
+ if (dead) {
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->flags |= SDHCI_DEVICE_DEAD;
+
+ if (host->mrq) {
+ printk(KERN_ERR "%s: Controller removed during "
+ " transfer!\n", mmc_hostname(host->mmc));
- chip->hosts[slot] = NULL;
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
- mmc_remove_host(mmc);
+ mmc_remove_host(host->mmc);
#ifdef CONFIG_LEDS_CLASS
led_classdev_unregister(&host->led);
#endif
- sdhci_reset(host, SDHCI_RESET_ALL);
+ if (!dead)
+ sdhci_reset(host, SDHCI_RESET_ALL);
free_irq(host->irq, host);
@@ -1613,106 +1769,21 @@ static void sdhci_remove_slot(struct pci_dev *pdev, int slot)
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
- iounmap(host->ioaddr);
-
- pci_release_region(pdev, host->bar);
+ kfree(host->adma_desc);
+ kfree(host->align_buffer);
- mmc_free_host(mmc);
+ host->adma_desc = NULL;
+ host->align_buffer = NULL;
}
-static int __devinit sdhci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int ret, i;
- u8 slots, rev;
- struct sdhci_chip *chip;
-
- BUG_ON(pdev == NULL);
- BUG_ON(ent == NULL);
+EXPORT_SYMBOL_GPL(sdhci_remove_host);
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
-
- printk(KERN_INFO DRIVER_NAME
- ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n",
- pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
- (int)rev);
-
- ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
- if (ret)
- return ret;
-
- slots = PCI_SLOT_INFO_SLOTS(slots) + 1;
- DBG("found %d slot(s)\n", slots);
- if (slots == 0)
- return -ENODEV;
-
- ret = pci_enable_device(pdev);
- if (ret)
- return ret;
-
- chip = kzalloc(sizeof(struct sdhci_chip) +
- sizeof(struct sdhci_host*) * slots, GFP_KERNEL);
- if (!chip) {
- ret = -ENOMEM;
- goto err;
- }
-
- chip->pdev = pdev;
- chip->quirks = ent->driver_data;
-
- if (debug_quirks)
- chip->quirks = debug_quirks;
-
- chip->num_slots = slots;
- pci_set_drvdata(pdev, chip);
-
- for (i = 0;i < slots;i++) {
- ret = sdhci_probe_slot(pdev, i);
- if (ret) {
- for (i--;i >= 0;i--)
- sdhci_remove_slot(pdev, i);
- goto free;
- }
- }
-
- return 0;
-
-free:
- pci_set_drvdata(pdev, NULL);
- kfree(chip);
-
-err:
- pci_disable_device(pdev);
- return ret;
-}
-
-static void __devexit sdhci_remove(struct pci_dev *pdev)
+void sdhci_free_host(struct sdhci_host *host)
{
- int i;
- struct sdhci_chip *chip;
-
- chip = pci_get_drvdata(pdev);
-
- if (chip) {
- for (i = 0;i < chip->num_slots;i++)
- sdhci_remove_slot(pdev, i);
-
- pci_set_drvdata(pdev, NULL);
-
- kfree(chip);
- }
-
- pci_disable_device(pdev);
+ mmc_free_host(host->mmc);
}
-static struct pci_driver sdhci_driver = {
- .name = DRIVER_NAME,
- .id_table = pci_ids,
- .probe = sdhci_probe,
- .remove = __devexit_p(sdhci_remove),
- .suspend = sdhci_suspend,
- .resume = sdhci_resume,
-};
+EXPORT_SYMBOL_GPL(sdhci_free_host);
/*****************************************************************************\
* *
@@ -1726,14 +1797,11 @@ static int __init sdhci_drv_init(void)
": Secure Digital Host Controller Interface driver\n");
printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
- return pci_register_driver(&sdhci_driver);
+ return 0;
}
static void __exit sdhci_drv_exit(void)
{
- DBG("Exiting\n");
-
- pci_unregister_driver(&sdhci_driver);
}
module_init(sdhci_drv_init);
@@ -1742,7 +1810,7 @@ module_exit(sdhci_drv_exit);
module_param(debug_quirks, uint, 0444);
MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
-MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
MODULE_LICENSE("GPL");
MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 299118de893..5bb35528176 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -10,18 +10,6 @@
*/
/*
- * PCI registers
- */
-
-#define PCI_SDHCI_IFPIO 0x00
-#define PCI_SDHCI_IFDMA 0x01
-#define PCI_SDHCI_IFVENDOR 0x02
-
-#define PCI_SLOT_INFO 0x40 /* 8 bits */
-#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7)
-#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07
-
-/*
* Controller registers
*/
@@ -72,6 +60,11 @@
#define SDHCI_CTRL_LED 0x01
#define SDHCI_CTRL_4BITBUS 0x02
#define SDHCI_CTRL_HISPD 0x04
+#define SDHCI_CTRL_DMA_MASK 0x18
+#define SDHCI_CTRL_SDMA 0x00
+#define SDHCI_CTRL_ADMA1 0x08
+#define SDHCI_CTRL_ADMA32 0x10
+#define SDHCI_CTRL_ADMA64 0x18
#define SDHCI_POWER_CONTROL 0x29
#define SDHCI_POWER_ON 0x01
@@ -117,6 +110,7 @@
#define SDHCI_INT_DATA_END_BIT 0x00400000
#define SDHCI_INT_BUS_POWER 0x00800000
#define SDHCI_INT_ACMD12ERR 0x01000000
+#define SDHCI_INT_ADMA_ERROR 0x02000000
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
@@ -140,11 +134,14 @@
#define SDHCI_CLOCK_BASE_SHIFT 8
#define SDHCI_MAX_BLOCK_MASK 0x00030000
#define SDHCI_MAX_BLOCK_SHIFT 16
+#define SDHCI_CAN_DO_ADMA2 0x00080000
+#define SDHCI_CAN_DO_ADMA1 0x00100000
#define SDHCI_CAN_DO_HISPD 0x00200000
#define SDHCI_CAN_DO_DMA 0x00400000
#define SDHCI_CAN_VDD_330 0x01000000
#define SDHCI_CAN_VDD_300 0x02000000
#define SDHCI_CAN_VDD_180 0x04000000
+#define SDHCI_CAN_64BIT 0x10000000
/* 44-47 reserved for more caps */
@@ -152,7 +149,16 @@
/* 4C-4F reserved for more max current */
-/* 50-FB reserved */
+#define SDHCI_SET_ACMD12_ERROR 0x50
+#define SDHCI_SET_INT_ERROR 0x52
+
+#define SDHCI_ADMA_ERROR 0x54
+
+/* 55-57 reserved */
+
+#define SDHCI_ADMA_ADDRESS 0x58
+
+/* 60-FB reserved */
#define SDHCI_SLOT_INT_STATUS 0xFC
@@ -161,11 +167,50 @@
#define SDHCI_VENDOR_VER_SHIFT 8
#define SDHCI_SPEC_VER_MASK 0x00FF
#define SDHCI_SPEC_VER_SHIFT 0
+#define SDHCI_SPEC_100 0
+#define SDHCI_SPEC_200 1
-struct sdhci_chip;
+struct sdhci_ops;
struct sdhci_host {
- struct sdhci_chip *chip;
+ /* Data set by hardware interface driver */
+ const char *hw_name; /* Hardware bus name */
+
+ unsigned int quirks; /* Deviations from spec. */
+
+/* Controller doesn't honor resets unless we touch the clock register */
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
+/* Controller has bad caps bits, but really supports DMA */
+#define SDHCI_QUIRK_FORCE_DMA (1<<1)
+/* Controller doesn't like to be reset when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
+/* Controller doesn't like clearing the power reg before a change */
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
+/* Controller has an unusable DMA engine */
+#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
+/* Controller has an unusable ADMA engine */
+#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
+/* Controller can only ADMA chunks that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
+/* Controller provides an incorrect timeout value for transfers */
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
+
+ int irq; /* Device IRQ */
+ void __iomem * ioaddr; /* Mapped address */
+
+ const struct sdhci_ops *ops; /* Low level hw interface */
+
+ /* Internal data */
struct mmc_host *mmc; /* MMC structure */
#ifdef CONFIG_LEDS_CLASS
@@ -176,7 +221,11 @@ struct sdhci_host {
int flags; /* Host attributes */
#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */
-#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */
+#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
+#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
+
+ unsigned int version; /* SDHCI spec. version */
unsigned int max_clk; /* Max possible freq (MHz) */
unsigned int timeout_clk; /* Timeout freq (KHz) */
@@ -194,22 +243,41 @@ struct sdhci_host {
int offset; /* Offset into current sg */
int remain; /* Bytes left in current */
- int irq; /* Device IRQ */
- int bar; /* PCI BAR index */
- unsigned long addr; /* Bus address */
- void __iomem * ioaddr; /* Mapped address */
+ int sg_count; /* Mapped sg entries */
+
+ u8 *adma_desc; /* ADMA descriptor table */
+ u8 *align_buffer; /* Bounce buffer */
+
+ dma_addr_t adma_addr; /* Mapped ADMA descr. table */
+ dma_addr_t align_addr; /* Mapped bounce buffer */
struct tasklet_struct card_tasklet; /* Tasklet structures */
struct tasklet_struct finish_tasklet;
struct timer_list timer; /* Timer for timeouts */
-};
-struct sdhci_chip {
- struct pci_dev *pdev;
+ unsigned long private[0] ____cacheline_aligned;
+};
- unsigned long quirks;
- int num_slots; /* Slots on controller */
- struct sdhci_host *hosts[0]; /* Pointers to hosts */
+struct sdhci_ops {
+ int (*enable_dma)(struct sdhci_host *host);
};
+
+
+extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
+ size_t priv_size);
+extern void sdhci_free_host(struct sdhci_host *host);
+
+static inline void *sdhci_priv(struct sdhci_host *host)
+{
+ return (void *)host->private;
+}
+
+extern int sdhci_add_host(struct sdhci_host *host);
+extern void sdhci_remove_host(struct sdhci_host *host, int dead);
+
+#ifdef CONFIG_PM
+extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
+extern int sdhci_resume_host(struct sdhci_host *host);
+#endif
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
new file mode 100644
index 00000000000..f99e9f72162
--- /dev/null
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -0,0 +1,575 @@
+/*
+ * sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be
+ * found on some Ricoh RL5c476 II cardbus bridge
+ *
+ * Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+#define DEBUG
+#define VERBOSE_DEBUG
+*/
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/scatterlist.h>
+#include <linux/version.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <linux/io.h>
+
+#include <linux/mmc/host.h>
+
+#define DRIVER_NAME "sdricoh_cs"
+
+static unsigned int switchlocked;
+
+/* i/o region */
+#define SDRICOH_PCI_REGION 0
+#define SDRICOH_PCI_REGION_SIZE 0x1000
+
+/* registers */
+#define R104_VERSION 0x104
+#define R200_CMD 0x200
+#define R204_CMD_ARG 0x204
+#define R208_DATAIO 0x208
+#define R20C_RESP 0x20c
+#define R21C_STATUS 0x21c
+#define R2E0_INIT 0x2e0
+#define R2E4_STATUS_RESP 0x2e4
+#define R2F0_RESET 0x2f0
+#define R224_MODE 0x224
+#define R226_BLOCKSIZE 0x226
+#define R228_POWER 0x228
+#define R230_DATA 0x230
+
+/* flags for the R21C_STATUS register */
+#define STATUS_CMD_FINISHED 0x00000001
+#define STATUS_TRANSFER_FINISHED 0x00000004
+#define STATUS_CARD_INSERTED 0x00000020
+#define STATUS_CARD_LOCKED 0x00000080
+#define STATUS_CMD_TIMEOUT 0x00400000
+#define STATUS_READY_TO_READ 0x01000000
+#define STATUS_READY_TO_WRITE 0x02000000
+#define STATUS_BUSY 0x40000000
+
+/* timeouts */
+#define INIT_TIMEOUT 100
+#define CMD_TIMEOUT 100000
+#define TRANSFER_TIMEOUT 100000
+#define BUSY_TIMEOUT 32767
+
+/* list of supported pcmcia devices */
+static struct pcmcia_device_id pcmcia_ids[] = {
+ /* vendor and device strings followed by their crc32 hashes */
+ PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed,
+ 0xc3901202),
+ PCMCIA_DEVICE_NULL,
+};
+
+MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids);
+
+/* mmc privdata */
+struct sdricoh_host {
+ struct device *dev;
+ struct mmc_host *mmc; /* MMC structure */
+ unsigned char __iomem *iobase;
+ struct pci_dev *pci_dev;
+ int app_cmd;
+};
+
+/***************** register i/o helper functions *****************************/
+
+static inline unsigned int sdricoh_readl(struct sdricoh_host *host,
+ unsigned int reg)
+{
+ unsigned int value = readl(host->iobase + reg);
+ dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value);
+ return value;
+}
+
+static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg,
+ unsigned int value)
+{
+ writel(value, host->iobase + reg);
+ dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value);
+
+}
+
+static inline unsigned int sdricoh_readw(struct sdricoh_host *host,
+ unsigned int reg)
+{
+ unsigned int value = readw(host->iobase + reg);
+ dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value);
+ return value;
+}
+
+static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg,
+ unsigned short value)
+{
+ writew(value, host->iobase + reg);
+ dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value);
+}
+
+static inline unsigned int sdricoh_readb(struct sdricoh_host *host,
+ unsigned int reg)
+{
+ unsigned int value = readb(host->iobase + reg);
+ dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value);
+ return value;
+}
+
+static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted,
+ unsigned int timeout){
+ unsigned int loop;
+ unsigned int status = 0;
+ struct device *dev = host->dev;
+ for (loop = 0; loop < timeout; loop++) {
+ status = sdricoh_readl(host, R21C_STATUS);
+ sdricoh_writel(host, R2E4_STATUS_RESP, status);
+ if (status & wanted)
+ break;
+ }
+
+ if (loop == timeout) {
+ dev_err(dev, "query_status: timeout waiting for %x\n", wanted);
+ return -ETIMEDOUT;
+ }
+
+ /* do not do this check in the loop as some commands fail otherwise */
+ if (status & 0x7F0000) {
+ dev_err(dev, "waiting for status bit %x failed\n", wanted);
+ return -EINVAL;
+ }
+ return 0;
+
+}
+
+static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode,
+ unsigned int arg)
+{
+ unsigned int status;
+ int result = 0;
+ unsigned int loop = 0;
+ /* reset status reg? */
+ sdricoh_writel(host, R21C_STATUS, 0x18);
+ /* fill parameters */
+ sdricoh_writel(host, R204_CMD_ARG, arg);
+ sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode);
+ /* wait for command completion */
+ if (opcode) {
+ for (loop = 0; loop < CMD_TIMEOUT; loop++) {
+ status = sdricoh_readl(host, R21C_STATUS);
+ sdricoh_writel(host, R2E4_STATUS_RESP, status);
+ if (status & STATUS_CMD_FINISHED)
+ break;
+ }
+ /* don't check for timeout in the loop it is not always
+ reset correctly
+ */
+ if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT)
+ result = -ETIMEDOUT;
+
+ }
+
+ return result;
+
+}
+
+static int sdricoh_reset(struct sdricoh_host *host)
+{
+ dev_dbg(host->dev, "reset\n");
+ sdricoh_writel(host, R2F0_RESET, 0x10001);
+ sdricoh_writel(host, R2E0_INIT, 0x10000);
+ if (sdricoh_readl(host, R2E0_INIT) != 0x10000)
+ return -EIO;
+ sdricoh_writel(host, R2E0_INIT, 0x10007);
+
+ sdricoh_writel(host, R224_MODE, 0x2000000);
+ sdricoh_writel(host, R228_POWER, 0xe0);
+
+
+ /* status register ? */
+ sdricoh_writel(host, R21C_STATUS, 0x18);
+
+ return 0;
+}
+
+static int sdricoh_blockio(struct sdricoh_host *host, int read,
+ u8 *buf, int len)
+{
+ int size;
+ u32 data = 0;
+ /* wait until the data is available */
+ if (read) {
+ if (sdricoh_query_status(host, STATUS_READY_TO_READ,
+ TRANSFER_TIMEOUT))
+ return -ETIMEDOUT;
+ sdricoh_writel(host, R21C_STATUS, 0x18);
+ /* read data */
+ while (len) {
+ data = sdricoh_readl(host, R230_DATA);
+ size = min(len, 4);
+ len -= size;
+ while (size) {
+ *buf = data & 0xFF;
+ buf++;
+ data >>= 8;
+ size--;
+ }
+ }
+ } else {
+ if (sdricoh_query_status(host, STATUS_READY_TO_WRITE,
+ TRANSFER_TIMEOUT))
+ return -ETIMEDOUT;
+ sdricoh_writel(host, R21C_STATUS, 0x18);
+ /* write data */
+ while (len) {
+ size = min(len, 4);
+ len -= size;
+ while (size) {
+ data >>= 8;
+ data |= (u32)*buf << 24;
+ buf++;
+ size--;
+ }
+ sdricoh_writel(host, R230_DATA, data);
+ }
+ }
+
+ if (len)
+ return -EIO;
+
+ return 0;
+}
+
+static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sdricoh_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = cmd->data;
+ struct device *dev = host->dev;
+ unsigned char opcode = cmd->opcode;
+ int i;
+
+ dev_dbg(dev, "=============================\n");
+ dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode);
+
+ sdricoh_writel(host, R21C_STATUS, 0x18);
+
+ /* MMC_APP_CMDs need some special handling */
+ if (host->app_cmd) {
+ opcode |= 64;
+ host->app_cmd = 0;
+ } else if (opcode == 55)
+ host->app_cmd = 1;
+
+ /* read/write commands seem to require this */
+ if (data) {
+ sdricoh_writew(host, R226_BLOCKSIZE, data->blksz);
+ sdricoh_writel(host, R208_DATAIO, 0);
+ }
+
+ cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg);
+
+ /* read response buffer */
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ /* CRC is stripped so we need to do some shifting. */
+ for (i = 0; i < 4; i++) {
+ cmd->resp[i] =
+ sdricoh_readl(host,
+ R20C_RESP + (3 - i) * 4) << 8;
+ if (i != 3)
+ cmd->resp[i] |=
+ sdricoh_readb(host, R20C_RESP +
+ (3 - i) * 4 - 1);
+ }
+ } else
+ cmd->resp[0] = sdricoh_readl(host, R20C_RESP);
+ }
+
+ /* transfer data */
+ if (data && cmd->error == 0) {
+ dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i "
+ "sg length %i\n", data->blksz, data->blocks,
+ data->sg_len, data->sg->length);
+
+ /* enter data reading mode */
+ sdricoh_writel(host, R21C_STATUS, 0x837f031e);
+ for (i = 0; i < data->blocks; i++) {
+ size_t len = data->blksz;
+ u8 *buf;
+ struct page *page;
+ int result;
+ page = sg_page(data->sg);
+
+ buf = kmap(page) + data->sg->offset + (len * i);
+ result =
+ sdricoh_blockio(host,
+ data->flags & MMC_DATA_READ, buf, len);
+ kunmap(page);
+ flush_dcache_page(page);
+ if (result) {
+ dev_err(dev, "sdricoh_request: cmd %i "
+ "block transfer failed\n", cmd->opcode);
+ cmd->error = result;
+ break;
+ } else
+ data->bytes_xfered += len;
+ }
+
+ sdricoh_writel(host, R208_DATAIO, 1);
+
+ if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED,
+ TRANSFER_TIMEOUT)) {
+ dev_err(dev, "sdricoh_request: transfer end error\n");
+ cmd->error = -EINVAL;
+ }
+ }
+ /* FIXME check busy flag */
+
+ mmc_request_done(mmc, mrq);
+ dev_dbg(dev, "=============================\n");
+}
+
+static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdricoh_host *host = mmc_priv(mmc);
+ dev_dbg(host->dev, "set_ios\n");
+
+ if (ios->power_mode == MMC_POWER_ON) {
+ sdricoh_writel(host, R228_POWER, 0xc0e0);
+
+ if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ sdricoh_writel(host, R224_MODE, 0x2000300);
+ sdricoh_writel(host, R228_POWER, 0x40e0);
+ } else {
+ sdricoh_writel(host, R224_MODE, 0x2000340);
+ }
+
+ } else if (ios->power_mode == MMC_POWER_UP) {
+ sdricoh_writel(host, R224_MODE, 0x2000320);
+ sdricoh_writel(host, R228_POWER, 0xe0);
+ }
+}
+
+static int sdricoh_get_ro(struct mmc_host *mmc)
+{
+ struct sdricoh_host *host = mmc_priv(mmc);
+ unsigned int status;
+
+ status = sdricoh_readl(host, R21C_STATUS);
+ sdricoh_writel(host, R2E4_STATUS_RESP, status);
+
+ /* some notebooks seem to have the locked flag switched */
+ if (switchlocked)
+ return !(status & STATUS_CARD_LOCKED);
+
+ return (status & STATUS_CARD_LOCKED);
+}
+
+static struct mmc_host_ops sdricoh_ops = {
+ .request = sdricoh_request,
+ .set_ios = sdricoh_set_ios,
+ .get_ro = sdricoh_get_ro,
+};
+
+/* initialize the control and register it to the mmc framework */
+static int sdricoh_init_mmc(struct pci_dev *pci_dev,
+ struct pcmcia_device *pcmcia_dev)
+{
+ int result = 0;
+ void __iomem *iobase = NULL;
+ struct mmc_host *mmc = NULL;
+ struct sdricoh_host *host = NULL;
+ struct device *dev = &pcmcia_dev->dev;
+ /* map iomem */
+ if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) !=
+ SDRICOH_PCI_REGION_SIZE) {
+ dev_dbg(dev, "unexpected pci resource len\n");
+ return -ENODEV;
+ }
+ iobase =
+ pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE);
+ if (!iobase) {
+ dev_err(dev, "unable to map iobase\n");
+ return -ENODEV;
+ }
+ /* check version? */
+ if (readl(iobase + R104_VERSION) != 0x4000) {
+ dev_dbg(dev, "no supported mmc controller found\n");
+ result = -ENODEV;
+ goto err;
+ }
+ /* allocate privdata */
+ mmc = pcmcia_dev->priv =
+ mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev);
+ if (!mmc) {
+ dev_err(dev, "mmc_alloc_host failed\n");
+ result = -ENOMEM;
+ goto err;
+ }
+ host = mmc_priv(mmc);
+
+ host->iobase = iobase;
+ host->dev = dev;
+ host->pci_dev = pci_dev;
+
+ mmc->ops = &sdricoh_ops;
+
+ /* FIXME: frequency and voltage handling is done by the controller
+ */
+ mmc->f_min = 450000;
+ mmc->f_max = 24000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ mmc->max_seg_size = 1024 * 512;
+ mmc->max_blk_size = 512;
+
+ /* reset the controler */
+ if (sdricoh_reset(host)) {
+ dev_dbg(dev, "could not reset\n");
+ result = -EIO;
+ goto err;
+
+ }
+
+ result = mmc_add_host(mmc);
+
+ if (!result) {
+ dev_dbg(dev, "mmc host registered\n");
+ return 0;
+ }
+
+err:
+ if (iobase)
+ iounmap(iobase);
+ if (mmc)
+ mmc_free_host(mmc);
+
+ return result;
+}
+
+/* search for supported mmc controllers */
+static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
+{
+ struct pci_dev *pci_dev = NULL;
+
+ dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
+ " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
+
+ /* search pci cardbus bridge that contains the mmc controler */
+ /* the io region is already claimed by yenta_socket... */
+ while ((pci_dev =
+ pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476,
+ pci_dev))) {
+ /* try to init the device */
+ if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) {
+ dev_info(&pcmcia_dev->dev, "MMC controller found\n");
+ return 0;
+ }
+
+ }
+ dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n");
+ return -ENODEV;
+}
+
+static void sdricoh_pcmcia_detach(struct pcmcia_device *link)
+{
+ struct mmc_host *mmc = link->priv;
+
+ dev_dbg(&link->dev, "detach\n");
+
+ /* remove mmc host */
+ if (mmc) {
+ struct sdricoh_host *host = mmc_priv(mmc);
+ mmc_remove_host(mmc);
+ pci_iounmap(host->pci_dev, host->iobase);
+ pci_dev_put(host->pci_dev);
+ mmc_free_host(mmc);
+ }
+ pcmcia_disable_device(link);
+
+}
+
+#ifdef CONFIG_PM
+static int sdricoh_pcmcia_suspend(struct pcmcia_device *link)
+{
+ struct mmc_host *mmc = link->priv;
+ dev_dbg(&link->dev, "suspend\n");
+ mmc_suspend_host(mmc, PMSG_SUSPEND);
+ return 0;
+}
+
+static int sdricoh_pcmcia_resume(struct pcmcia_device *link)
+{
+ struct mmc_host *mmc = link->priv;
+ dev_dbg(&link->dev, "resume\n");
+ sdricoh_reset(mmc_priv(mmc));
+ mmc_resume_host(mmc);
+ return 0;
+}
+#else
+#define sdricoh_pcmcia_suspend NULL
+#define sdricoh_pcmcia_resume NULL
+#endif
+
+static struct pcmcia_driver sdricoh_driver = {
+ .drv = {
+ .name = DRIVER_NAME,
+ },
+ .probe = sdricoh_pcmcia_probe,
+ .remove = sdricoh_pcmcia_detach,
+ .id_table = pcmcia_ids,
+ .suspend = sdricoh_pcmcia_suspend,
+ .resume = sdricoh_pcmcia_resume,
+};
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init sdricoh_drv_init(void)
+{
+ return pcmcia_register_driver(&sdricoh_driver);
+}
+
+static void __exit sdricoh_drv_exit(void)
+{
+ pcmcia_unregister_driver(&sdricoh_driver);
+}
+
+module_init(sdricoh_drv_init);
+module_exit(sdricoh_drv_exit);
+
+module_param(switchlocked, uint, 0444);
+
+MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>");
+MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(switchlocked, "Switch the cards locked status."
+ "Use this when unlocked cards are shown readonly (default 0)");
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 1c14a186f00..13844843e8d 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -973,7 +973,7 @@ static int tifm_sd_probe(struct tifm_dev *sock)
mmc->ops = &tifm_sd_ops;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
mmc->f_min = 20000000 / 60;
mmc->f_max = 24000000;
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index c303e7f57ab..adda3795203 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -68,16 +68,16 @@ static const int unlock_codes[] = { 0x83, 0x87 };
static const int valid_ids[] = {
0x7112,
- };
+};
#ifdef CONFIG_PNP
-static unsigned int nopnp = 0;
+static unsigned int param_nopnp = 0;
#else
-static const unsigned int nopnp = 1;
+static const unsigned int param_nopnp = 1;
#endif
-static unsigned int io = 0x248;
-static unsigned int irq = 6;
-static int dma = 2;
+static unsigned int param_io = 0x248;
+static unsigned int param_irq = 6;
+static int param_dma = 2;
/*
* Basic functions
@@ -939,7 +939,7 @@ static int wbsd_get_ro(struct mmc_host *mmc)
spin_unlock_bh(&host->lock);
- return csr & WBSD_WRPT;
+ return !!(csr & WBSD_WRPT);
}
static const struct mmc_host_ops wbsd_ops = {
@@ -1219,7 +1219,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev)
mmc->f_min = 375000;
mmc->f_max = 24000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
spin_lock_init(&host->lock);
@@ -1420,7 +1420,7 @@ kfree:
dma_unmap_single(mmc_dev(host->mmc), host->dma_addr,
WBSD_DMA_SIZE, DMA_BIDIRECTIONAL);
- host->dma_addr = (dma_addr_t)NULL;
+ host->dma_addr = 0;
kfree(host->dma_buffer);
host->dma_buffer = NULL;
@@ -1445,7 +1445,7 @@ static void wbsd_release_dma(struct wbsd_host *host)
host->dma = -1;
host->dma_buffer = NULL;
- host->dma_addr = (dma_addr_t)NULL;
+ host->dma_addr = 0;
}
/*
@@ -1765,7 +1765,7 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp)
static int __devinit wbsd_probe(struct platform_device *dev)
{
/* Use the module parameters for resources */
- return wbsd_init(&dev->dev, io, irq, dma, 0);
+ return wbsd_init(&dev->dev, param_io, param_irq, param_dma, 0);
}
static int __devexit wbsd_remove(struct platform_device *dev)
@@ -1979,14 +1979,14 @@ static int __init wbsd_drv_init(void)
#ifdef CONFIG_PNP
- if (!nopnp) {
+ if (!param_nopnp) {
result = pnp_register_driver(&wbsd_pnp_driver);
if (result < 0)
return result;
}
#endif /* CONFIG_PNP */
- if (nopnp) {
+ if (param_nopnp) {
result = platform_driver_register(&wbsd_driver);
if (result < 0)
return result;
@@ -2012,12 +2012,12 @@ static void __exit wbsd_drv_exit(void)
{
#ifdef CONFIG_PNP
- if (!nopnp)
+ if (!param_nopnp)
pnp_unregister_driver(&wbsd_pnp_driver);
#endif /* CONFIG_PNP */
- if (nopnp) {
+ if (param_nopnp) {
platform_device_unregister(wbsd_device);
platform_driver_unregister(&wbsd_driver);
@@ -2029,11 +2029,11 @@ static void __exit wbsd_drv_exit(void)
module_init(wbsd_drv_init);
module_exit(wbsd_drv_exit);
#ifdef CONFIG_PNP
-module_param(nopnp, uint, 0444);
+module_param_named(nopnp, param_nopnp, uint, 0444);
#endif
-module_param(io, uint, 0444);
-module_param(irq, uint, 0444);
-module_param(dma, int, 0444);
+module_param_named(io, param_io, uint, 0444);
+module_param_named(irq, param_irq, uint, 0444);
+module_param_named(dma, param_dma, int, 0444);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");